April 2007 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 2/2] ASoC Samsung S3C24xx updates - i2s
by Liam Girdwood 16 Apr '07

16 Apr '07

This patch adds DMA size fields to the S3C24xx audio DMA params and exports the S3C24xx I2S digital audio interface. Signed-off-by: Graeme Gregory <gg(a)opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg(a)opensource.wolfsonmicro.com>

1 0

Re: [alsa-devel] [PATCH] Re: iec958 switch uneffective while playing ac3 stream
by Takashi Iwai 16 Apr '07

16 Apr '07

At Thu, 05 Apr 2007 10:47:52 +0200, Dominique Dumont wrote: > > Takashi Iwai <tiwai(a)suse.de> writes: > > > The patch is a bit dangerous because it unconditionally resets the > > DIGI_CONVERT verb for each widget. > > Agreed. We could also test the NID before switching on and off DigEn > in the DIGI_CONVERT. > > OTOH the switch would occur for *all* HDA chips which may not be what > you want. I'm not 100% sure that this particular procedure is necessary for all codecs. So, I prefer having it in the hda-codec part rather in hda-intel part. > > The below is my modified version. > > It doesn't turn off before the controller side reset as you did. So, > > if my version doesn't work, it implies that the SPDIF reset has to be > > done before the controller reset. Please give it a try. > > It works also ! I've tested AC3 and 44KHz. I cannot test 96KHz or > 196Khz (my amp is too old). Good to hear. > > + /* turn off SPDIF once; otherwise the IEC958 bits won't be updated */ > > I had more the impression that the SPDIF stream is messed up if you > change the stream format while the digital converter is working... > > > > + if (codec->spdif_ctls & 1) > > Shouldn't you use AC_DIG1_ENABLE for a proper patch ? > > if (codec->spdif_ctls & AC_DIG1_ENABLE) > > > + snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, > > + codec->spdif_ctls & 0xfe); > > likewise: codec->spdif_ctls & 0xff & ~AC_DIG1_ENABLE ? > > > + snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format); > > + /* turn on again (if needed) */ > > + if (codec->spdif_ctls & 1) > > if (codec->spdif_ctls & AC_DIG1_ENABLE) ? Yeah, that'd be better. I'll fix and commit to the HG tree later. thanks, Takashi

4 20

[alsa-devel] [PATCH 1/3] ASoC AT91xxxx - SSC port DSP support
by Liam Girdwood 16 Apr '07

16 Apr '07

This patch series by Frank Madarino updates the AT91xxxx core to add DSP/PCM audio hardware formats. Changes:- o Rename at19-i2s.c -> at91-ssc.c o Rename at91-i2s.h -> at91-ssc.h o Add DSP hardware formats. o Rename various I2S labels to SSC Signed-off-by: Frank Mandarino <fmandarino(a)endrelia.com> Signed-off-by: Liam Girdwood <lg(a)opensource.wolfsonmicro.com>

2 1

[alsa-devel] [PATCH 2/2] ASoC WM8753 codec - build changes
by Liam Girdwood 16 Apr '07

16 Apr '07

This patch adds the WM8753 codec driver to the kernel build system. Signed-off-by: Liam Girdwood <lg(a)opensource.wolfsonmicro.com>

1 0

[alsa-devel] [PATCH 3/3] ASoC AT91xxxx build
by Liam Girdwood 16 Apr '07

16 Apr '07

This patch by Frank Madarino updates the AT91xxxx Makefile and Kconfig to build the renamed SSC files. Changes:- o Rename various i2s labels to ssc Signed-off-by: Frank Mandarino <fmandarino(a)endrelia.com> Signed-off-by: Liam Girdwood <lg(a)opensource.wolfsonmicro.com>

1 0

[alsa-devel] [PATCH 2/3] ASoC AT91xxxx eti B1 machine SSC changes
by Liam Girdwood 16 Apr '07

16 Apr '07

This patch by Frank Madarino updates the eti B1 machine to use the newer AT91xxxx SSC core with the DSP/PCM audio hardware changes. Changes:- o #include "at91-ssc.h" instead of "at91-i2s.h" o Rename various I2S labels to SSC Signed-off-by: Frank Mandarino <fmandarino(a)endrelia.com> Signed-off-by: Liam Girdwood <lg(a)opensource.wolfsonmicro.com>

1 0

[alsa-devel] [PATCH] ASoC DAPM switching for reentrant codec paths.
by Liam Girdwood 16 Apr '07

16 Apr '07

This patch fixes an issue whereby power was applied to any inactive analog path that would leave and reenter a codec (e.g. ACOP -> ACIN on WM8753). This change now checks for such paths and DAPM will power them down when not in use. Signed-off-by: Seth Forshee <seth.forshee(a)gmail.com> Signed-off-by: Liam Girdwood <lg(a)opensource.wolfsonmicro.com>

2 4

[alsa-devel] [PATCH] ASoC WM9712 kmemdup
by Liam Girdwood 16 Apr '07

16 Apr '07

This patch creates the WM9712 codec register cache using kmemdup instead of doing a kzalloc followed by a memcpy. Signed-off-by: Graeme Gregory <gg(a)opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg(a)opensource.wolfsonmicro.com>

1 1

Re: [alsa-devel] 2.6.21-rc6, ASUS M2V 1.01G, ALSA detection/non-support
by Richard A Nelson 16 Apr '07

16 Apr '07

On Sun, 15 Apr 2007, Jiri Slaby wrote: > Date: Sun, 15 Apr 2007 23:45:29 +0200 > From: Jiri Slaby <jirislaby(a)gmail.com> > To: Richard A Nelson <cowboy(a)cavein.org> > Cc: linux-kernel <linux-kernel(a)vger.kernel.org> > Subject: Re: 2.6.21-rc6, ASUS M2V 1.01G, ALSA detection/non-support > > Cc: alsa-devel(a)alsa-project.org > > Richard A Nelson napsal(a): >> My son has an earlier version of the M2V & BIOS (0901) and his gets full >> 6ch >> sound. >> >> The 1.01G, and related BIOS (1304 or 1701) do not properly handle the >> onboard sound: >> hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from >> BIOS... > > What does your /proc/asound/version say? Both machines say: Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). The machines are running Debian Sid -- Rick Nelson Life'll kill ya -- Warren Zevon Then you'll be dead -- Life'll kill ya

1 0

Re: [alsa-devel] 2.6.21-rc6, ASUS M2V 1.01G, ALSA detection/non-support
by Jiri Slaby 16 Apr '07

16 Apr '07

Really Cc: alsa-devel(a)alsa-project.org Richard A Nelson napsal(a): > My son has an earlier version of the M2V & BIOS (0901) and his gets full > 6ch > sound. > > The 1.01G, and related BIOS (1304 or 1701) do not properly handle the > onboard sound: > hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from > BIOS... What does your /proc/asound/version say? > it seems to truely be a BIOS issue, as I don't see a difference in lspci > -vvxxx between our systems: > > 80:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio > Controller (rev 10) > Subsystem: ASUSTeK Computer Inc. Unknown device 81e7 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Step ping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3ho t+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express Unknown type IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed unknown, Width x0, ASPM unknown, > Port 0 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled CommClk- ExtSynch- > Link: Speed unknown, Width x0 > 00: 06 11 88 32 06 00 10 00 10 00 03 04 10 00 00 00 > 10: 04 c0 ff fb 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e7 81 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 > 40: 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 10 00 91 00 00 00 00 00 00 00 30 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > ALSA, instead of seeing ALC660, on my box sees ALC660-VD, with very > little in the way of devices (only front output) - which does not work > either :( > > Stumped on where to go from here... regards, -- http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E

1 0