- Alsa-devel - mailman.alsa-project.org

[PATCH v11 00/10] spi: Add support for stacked/parallel memories
by Amit Kumar Mahapatra 19 Aug '24

19 Aug '24

This patch series updated the spi-nor, spi core and the AMD-Xilinx GQSPI driver to add stacked and parallel memories support. The first nine patches https://lore.kernel.org/all/20230119185342.2093323-1-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-2-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-3-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-4-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-5-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-6-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-7-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-8-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-9-amit.kumar-mahapatra@a… of the previous series got applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next But the rest of the patches in the series did not get applied as failure was reported for spi driver with GPIO CS, so send the remaining patches in the series after rebasing it on top of for-next branch and fixing the issue. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirr… --- BRANCH: for-next Changes in v11: - Rebased patch series on top of latest for-next branch. - Added a new patch(1/10) to replace spi->chip_select with spi_get_chipselect() call in tps6594-spi.c. - Added a new patch(2/10) to replace spi->chip_select with spi_get_chipseletc() call in cs35l56_hda_spi.c. - In spi.c initialized unused CS[] to 0xff and spi->cs_index_mask to 0x01 in all flows. - Updated spi_dev_check() to compare the CS of old spi device with the new spi device CS. - Updated cover letter description to add information regarding GPIO CS testing and added Stefen's Tested-by tag in 3/10 patch. Changes in v10: - Rebased patch series on top of latest for-next branch and fixed merge conflicts. Changes in v9: - Updated 1/8 patch description to add an high-level overview of parallel(multi-cs) & stacked design. - Initialized all unused CS to 0xFF. - Moved CS check from spi_add_device() to __spi_add_device(). - Updated __spi_add_device() to check to make sure that multiple logical CS don't map to the same physical CS and same physical CS doesn't map to different logical CS. - Updated 1/8, 5/8 & 7/8 to support arbitrary number of flash devices connected in parallel or stacked mode. - Updated documentation for chip_select. - Added a new spi-nor structure member nor->num_flash to keep track of the number of flashes connected. - Added a new patch in the series 4/8 to move write_enable call just before spi_mem ops call in SPI-NOR. - Added comments in SPI core & SPI-NOR. - Rebased the patch series on top of the latest for-next branch. Changes in v8: - Updated __spi_add_device() and spi_set_cs() to fix spi driver failure with GPIO CS. - Rebased the patch series on top of latest for-next branch and fixed merge conflicts. - Updated cover letter description to add information regarding GPIO CS testing and request Stefan to provide his Tested-by tag for 1/7 patch. - Updated 1/7 patch description. Changes in v7: - Updated spi_dev_check() to avoid failures for spi driver GPIO CS and moved the error message from __spi_add_device() to spi_dev_check(). - Resolved code indentation issue in spi_set_cs(). - In spi_set_cs() call spi_delay_exec( ) once if the controller supports multi cs with both the CS backed by GPIO. - Updated __spi_validate()to add checks for both the GPIO CS. - Replaced cs_index_mask bit mask with SPI_CS_CNT_MAX. - Updated struct spi_controller to represent multi CS capability of the spi controller through a flag bit SPI_CONTROLLER_MULTI_CS instead of a boolen structure member "multi_cs_cap". - Updated 1/7 patch description . Changes in v6: - Rebased on top of latest v6.3-rc1 and fixed merge conflicts in spi-mpc512x-psc.c, sfdp.c, spansion.c files and removed spi-omap-100k.c. - Updated spi_dev_check( ) to reject new devices if any one of the chipselect is used by another device. Changes in v5: - Rebased the patches on top of v6.3-rc1 and fixed the merge conflicts. - Fixed compilation warnings in spi-sh-msiof.c with shmobile_defconfig Changes in v4: - Fixed build error in spi-pl022.c file - reported by Mark. - Fixed build error in spi-sn-f-ospi.c file. - Added Reviewed-by: Serge Semin <fancer.lancer(a)gmail.com> tag. - Added two more patches to replace spi->chip_select with API calls in mpc832x_rdb.c & cs35l41_hda_spi.c files. Changes in v3: - Rebased the patches on top of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next - Added a patch to convert spi_nor_otp_region_len(nor) & spi_nor_otp_n_regions(nor) macros into inline functions - Added Reviewed-by & Acked-by tags Changes in v2: - Rebased the patches on top of v6.2-rc1 - Created separate patch to add get & set APIs for spi->chip_select & spi->cs_gpiod, and replaced all spi->chip_select and spi->cs_gpiod references with the API calls. - Created separate patch to add get & set APIs for nor->params. --- Amit Kumar Mahapatra (10): mfd: tps6594: Use set/get APIs to access spi->chip_select ALSA: hda/cs35l56: Use set/get APIs to access spi->chip_select spi: Add multi-cs memories support in SPI core mtd: spi-nor: Convert macros with inline functions mtd: spi-nor: Add APIs to set/get nor->params mtd: spi-nor: Move write enable inside specific write & erase APIs mtd: spi-nor: Add stacked memories support in spi-nor spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver mtd: spi-nor: Add parallel memories support in spi-nor spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver drivers/mfd/tps6594-spi.c | 2 +- drivers/mtd/spi-nor/atmel.c | 17 +- drivers/mtd/spi-nor/core.c | 683 +++++++++++++++++++++++++------ drivers/mtd/spi-nor/core.h | 8 + drivers/mtd/spi-nor/debugfs.c | 4 +- drivers/mtd/spi-nor/gigadevice.c | 4 +- drivers/mtd/spi-nor/issi.c | 11 +- drivers/mtd/spi-nor/macronix.c | 10 +- drivers/mtd/spi-nor/micron-st.c | 35 +- drivers/mtd/spi-nor/otp.c | 48 ++- drivers/mtd/spi-nor/sfdp.c | 33 +- drivers/mtd/spi-nor/spansion.c | 57 +-- drivers/mtd/spi-nor/sst.c | 7 +- drivers/mtd/spi-nor/swp.c | 25 +- drivers/mtd/spi-nor/winbond.c | 2 +- drivers/mtd/spi-nor/xilinx.c | 18 +- drivers/spi/spi-zynqmp-gqspi.c | 58 ++- drivers/spi/spi.c | 259 ++++++++++-- include/linux/mtd/spi-nor.h | 21 +- include/linux/spi/spi.h | 51 ++- sound/pci/hda/cs35l56_hda_spi.c | 2 +- 21 files changed, 1085 insertions(+), 270 deletions(-) -- 2.17.1

10 61

[PATCH v3] MAINTAINERS: update entries in TEXAS INSTRUMENTS LOW/MIDDLE-POWER AUDIO AMPLIFIER (ASoC/HDA) DRIVERS and add entries for haptic driver
by Shenghao Ding 19 Aug '24

19 Aug '24

Due to internal re-org, Kevin is no longer mnaintaining audio driver. Due to job change, drop entries for the audio converter and add entries for both haptics drivers and middle-power audio amplifier drivers. Add audio converter, set the Status as Supported. So far, the Software maintainer has not been confirmed. Once the maintainer was confimred, the guy will update his mail into audio converter section. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v3: - Add Audio converter section - Set the section of LOW/MIDDLE-POWER AUDIO AMPLIFIER as Supported v2: - Add the detailed information of the maintained drivers. --- MAINTAINERS | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f328373463b0..32954c5a63c3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22569,26 +22569,42 @@ S: Maintained F: Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml F: sound/soc/ti/ -TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS +TEXAS INSTRUMENTS LOW/MIDDLE-POWER AUDIO AMPLIFIER (ASoC/HDA) & HAPTICS DRIVERS M: Shenghao Ding <shenghao-ding(a)ti.com> -M: Kevin Lu <kevin-lu(a)ti.com> M: Baojun Xu <baojun.xu(a)ti.com> L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) -S: Maintained +S: Supported +F: Documentation/devicetree/bindings/input/ti,drv260x.yaml +F: Documentation/devicetree/bindings/input/ti,drv266x.yaml F: Documentation/devicetree/bindings/sound/tas2552.txt +F: Documentation/devicetree/bindings/sound/tas5720.txt F: Documentation/devicetree/bindings/sound/ti,tas2562.yaml F: Documentation/devicetree/bindings/sound/ti,tas2770.yaml +F: Documentation/devicetree/bindings/sound/ti,tas2781.yaml F: Documentation/devicetree/bindings/sound/ti,tas27xx.yaml +F: Documentation/devicetree/bindings/sound/ti,tas5086.txt +F: Documentation/devicetree/bindings/sound/ti,tas57xx.yaml +F: Documentation/devicetree/bindings/sound/ti,tas5805m.yaml +F: Documentation/devicetree/bindings/sound/tpa6130a2.txt +F: drivers/input/misc/drv2*.c +F: include/sound/tas2*.h +F: include/sound/tas5086.h +F: include/sound/tpa6130a2-plat.h +F: sound/pci/hda/tas2781_hda_i2c.c +F: sound/soc/codecs/tas2*.* +F: sound/soc/codecs/tas5*.* +F: sound/soc/codecs/tpa6130a2.* + +TEXAS INSTRUMENTS AUDIO Converter (ASoC) DRIVERS +L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) +S: Maintained F: Documentation/devicetree/bindings/sound/ti,pcm1681.yaml F: Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml +F: Documentation/devicetree/bindings/sound/ti,pcm6240.yaml F: Documentation/devicetree/bindings/sound/ti,tlv320*.yaml F: Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml F: Documentation/devicetree/bindings/sound/tlv320aic31xx.txt -F: Documentation/devicetree/bindings/sound/tpa6130a2.txt -F: include/sound/tas2*.h F: include/sound/tlv320*.h -F: include/sound/tpa6130a2-plat.h -F: sound/pci/hda/tas2781_hda_i2c.c F: sound/soc/codecs/pcm1681.c F: sound/soc/codecs/pcm1789*.* F: sound/soc/codecs/pcm179x*.* @@ -22598,9 +22614,8 @@ F: sound/soc/codecs/pcm3060*.* F: sound/soc/codecs/pcm3168a*.* F: sound/soc/codecs/pcm5102a.c F: sound/soc/codecs/pcm512x*.* -F: sound/soc/codecs/tas2*.* +F: sound/soc/codecs/pcm6240.* F: sound/soc/codecs/tlv320*.* -F: sound/soc/codecs/tpa6130a2.* TEXAS INSTRUMENTS DMA DRIVERS M: Peter Ujfalusi <peter.ujfalusi(a)gmail.com> -- 2.34.1

1 0

Port API coverage reporting to Python 3 and adapt to current doxygen output
by GitHub pull_request - opened 18 Aug '24

18 Aug '24

alsa-project/alsa-python pull request #15 was opened from tormodvolden: Tested by comparing the new output from alsa-python-coverage.py with the old COVERAGE file. For transparency and easier review there are multiple commits for the Python 3 fixups, but this can be squashed if desired. Request URL : https://github.com/alsa-project/alsa-python/pull/15 Patch URL : https://github.com/alsa-project/alsa-python/pull/15.patch Repository URL: https://github.com/alsa-project/alsa-python

1 0

Add persistent ID's for soundcards and midi devices (like coreaudio)
by GitHub issues - opened 18 Aug '24

18 Aug '24

alsa-project/alsa-lib issue #407 was opened from sjomae: "This is something where macOS' Coreaudio/MIDI shines. Unlike macOS Linux/ALSA has no persistent unique IDs for soundcards or MIDI devices. ALSA supports hotplug, and first come first server sequential numeric IDs. The best you^Wpipewire can do is keep track of cards by name. So this is not something pipewire can reliably address, until ALSA get support to identify cards by vendor and serial-number, and provide a UUID." https://lists.linuxaudio.org/hyperkitty/list/linux-audio-dev@lists.linuxaud… Issue URL : https://github.com/alsa-project/alsa-lib/issues/407 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH 1/1] ASoC: dt-bindings: Convert tpa6130a2.txt to yaml
by Frank Li 17 Aug '24

17 Aug '24

Convert binding doc tpa6130a2.txt to yaml format. Additional change: - add ref to dai-common.yaml - add i2c node in example Fix below warning: arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a20000/amp@60: failed to match any schema with compatible: ['ti,tpa6130a2'] Signed-off-by: Frank Li <Frank.Li(a)nxp.com> --- .../bindings/sound/ti,tpa6130a2.yaml | 55 +++++++++++++++++++ .../devicetree/bindings/sound/tpa6130a2.txt | 27 --------- 2 files changed, 55 insertions(+), 27 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml delete mode 100644 Documentation/devicetree/bindings/sound/tpa6130a2.txt diff --git a/Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml b/Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml new file mode 100644 index 0000000000000..a42bf9bde6940 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tpa6130a2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments - tpa6130a2 Codec module + +maintainers: + - Sebastian Reichel <sre(a)kernel.org> + +description: + Stereo, analog input headphone amplifier + +properties: + compatible: + enum: + - ti,tpa6130a2 + - ti,tpa6140a2 + + reg: + maxItems: 1 + + Vdd-supply: + description: power supply regulator + + power-gpio: + description: gpio pin to power the device + +required: + - compatible + - reg + - Vdd-supply + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + amplifier@60 { + compatible = "ti,tpa6130a2"; + reg = <0x60>; + Vdd-supply = <&vmmc2>; + power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + }; + }; + diff --git a/Documentation/devicetree/bindings/sound/tpa6130a2.txt b/Documentation/devicetree/bindings/sound/tpa6130a2.txt deleted file mode 100644 index 6dfa740e4b2d8..0000000000000 --- a/Documentation/devicetree/bindings/sound/tpa6130a2.txt +++ /dev/null @@ -1,27 +0,0 @@ -Texas Instruments - tpa6130a2 Codec module - -The tpa6130a2 serial control bus communicates through I2C protocols - -Required properties: - -- compatible - "string" - One of: - "ti,tpa6130a2" - TPA6130A2 - "ti,tpa6140a2" - TPA6140A2 - - -- reg - <int> - I2C slave address - -- Vdd-supply - <phandle> - power supply regulator - -Optional properties: - -- power-gpio - gpio pin to power the device - -Example: - -tpa6130a2: tpa6130a2@60 { - compatible = "ti,tpa6130a2"; - reg = <0x60>; - Vdd-supply = <&vmmc2>; - power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; -}; -- 2.34.1

3 2

ASUS Maximus Z790 Hero (ALC4082) - USB Audio 5.1 speakers assigned incorrectly and subwoofer not working
by GitHub issues - opened 16 Aug '24

16 Aug '24

alsa-project/alsa-ucm-conf issue #437 was opened from Gess79: I hope I'm correct to post this here. Still new to things Linux. **Situation** OS: Kubuntu 24.04 Mainboard = ASUS ROG Maximus Z790 Hero USB Audio = 0b05:1a53 ASUSTek Computer, Inc. USB Audio Speakers = Logitech Z906 Surround Kernel = 6.8.0-40-generic Alsa version = 1.2.9 **Issue** The speakers seem to be assigned incorrectly and the subwoofer isn't working. I'm testing the speakers through pulseaudio as follows: ![image](https://github.com/user-attachments/assets/8bf65600-63ad-46cc-af68-d51ab6d4a7e6) I'm listing the results below in three categories: - The icon clicked within pulseaudio - The soundfile played - The speaker the sound is actually output to _Icon clicked - Soundfile played - Physical speaker output_ Front Left - Front Left - Front Left Front Center - Front Center - Rear Left Front Right - Front Right - Front Right Rear Left - Rear Left - Front Center Subwoofer - Rear Center - Rear Right Rear Right - (nothing) - (nothing) I've had a lengthy discussion on Reddit but I couldn't find a fix for it so far: https://www.reddit.com/r/linux4noobs/comments/1980uv1/comment/kieqsor/ I'm happy to provide all information necessary to pinpoint the issue and fix it. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/437 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Use PyBytes and not Unicode strings for IEC958 values
by GitHub pull_request - edited 16 Aug '24

16 Aug '24

alsa-project/alsa-python pull request #14 was edited from tormodvolden: Suggested fix for #13. - the first commit is not strictly related but also needed to avoid hctltest1.py crashing with my audio devices, where some have info.count = 0. Let me know if more information is needed. I don't know if this is expected or if a warning should be issued. - I went for PyBytes instead of PyByteArray - for setting values, if the provided PyBytes value is shorter than the value, it will be zero-padded. - if it is too long, it will be silently truncated - following the existing code style, no empty lines were inserted, but this could help readability - the third commit is not for fixing the crash, but for fixing set_tuple() to actually do anything for IEC958 - I haven't changed the reference counting, which seems wrong to me in the original code as well. This would be a different issue. Request URL : https://github.com/alsa-project/alsa-python/pull/14 Patch URL : https://github.com/alsa-project/alsa-python/pull/14.patch Repository URL: https://github.com/alsa-project/alsa-python

1 0

Use PyBytes and not Unicode strings for IEC958 values
by GitHub pull_request - edited 16 Aug '24

16 Aug '24

alsa-project/alsa-python pull request #14 was edited from tormodvolden: Suggested fix for #13. - the first commit is not strictly related but also needed to avoid hctltest1.py crashing with my audio devices, where some have info.count = 0. Let me know if more information is needed. I don't know if this is expected or if a warning should be issued. - I went for PyBytes instead of PyByteArray - for setting values, if the provided PyBytes value is shorter than the value, it will be zero-padded. - if it is too long, it will be silently truncated - following the existing code style, no empty lines were inserted, but this could help readability - the third commit is not for fixing the crash, but for fixing set_tuple() to actually do anything for IEC958 Request URL : https://github.com/alsa-project/alsa-python/pull/14 Patch URL : https://github.com/alsa-project/alsa-python/pull/14.patch Repository URL: https://github.com/alsa-project/alsa-python

1 0

[PATCH] ASoC: dt-bindings: qcom,lpass-wsa-macro: correct clocks on SM8250
by srinivas.kandagatla＠linaro.org 16 Aug '24

16 Aug '24

From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> we seems to have ended up with duplicate clocks for frame-sync on sm8250, it has both va and fsgen which are exactly same things. Remove the redundant va clock and make it align with other SoCs. Codec driver does not even handle va clock, so remove this from the bindings and examples to avoid any confusion. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- .../bindings/sound/qcom,lpass-wsa-macro.yaml | 22 ++----------------- 1 file changed, 2 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index 06b5f7be3608..6f5644a89feb 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -64,6 +64,7 @@ allOf: compatible: enum: - qcom,sc7280-lpass-wsa-macro + - qcom,sm8250-lpass-wsa-macro - qcom,sm8450-lpass-wsa-macro - qcom,sc8280xp-lpass-wsa-macro then: @@ -79,24 +80,6 @@ allOf: - const: dcodec - const: fsgen - - if: - properties: - compatible: - enum: - - qcom,sm8250-lpass-wsa-macro - then: - properties: - clocks: - minItems: 6 - clock-names: - items: - - const: mclk - - const: npl - - const: macro - - const: dcodec - - const: va - - const: fsgen - - if: properties: compatible: @@ -130,8 +113,7 @@ examples: <&audiocc 0>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&aoncc LPASS_CDC_VA_MCLK>, <&vamacro>; - clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; clock-output-names = "mclk"; }; -- 2.25.1

3 2

[PATCH v1] ASoc: tas2781: Rename dai_driver name to unify the name between TAS2563 and TAS2781
by Shenghao Ding 16 Aug '24

16 Aug '24

Rename dai_driver name to unify the name between TAS2563 and TAS2781, remove unnecessary line feed, strscpy replace scnprintf. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Use strscpy to replace scnprintf. - rename dai_driver name from "tas2781_codec" to "tasdev_codec", in case of misunderstanding whether tas2781 or tas2563. - Remove unnecessary line feed for tasdevice_dsp_create_ctrls --- sound/soc/codecs/tas2781-i2c.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 8a57c045afdd..6631254d4985 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -353,7 +353,7 @@ static int tasdevice_create_control(struct tasdevice_priv *tas_priv) ret = -ENOMEM; goto out; } - scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "Speaker Profile Id"); + strscpy(name, "Speaker Profile Id", SNDRV_CTL_ELEM_ID_NAME_MAXLEN); prof_ctrls[mix_index].name = name; prof_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; prof_ctrls[mix_index].info = tasdevice_info_profile; @@ -424,8 +424,7 @@ static int tasdevice_configuration_put( return ret; } -static int tasdevice_dsp_create_ctrls( - struct tasdevice_priv *tas_priv) +static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) { struct snd_kcontrol_new *dsp_ctrls; char *prog_name, *conf_name; @@ -453,8 +452,8 @@ static int tasdevice_dsp_create_ctrls( goto out; } - scnprintf(prog_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - "Speaker Program Id"); + strscpy(prog_name, "Speaker Program Id", + SNDRV_CTL_ELEM_ID_NAME_MAXLEN); dsp_ctrls[mix_index].name = prog_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_programs; @@ -462,8 +461,7 @@ static int tasdevice_dsp_create_ctrls( dsp_ctrls[mix_index].put = tasdevice_program_put; mix_index++; - scnprintf(conf_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - "Speaker Config Id"); + strscpy(conf_name, "Speaker Config Id", SNDRV_CTL_ELEM_ID_NAME_MAXLEN); dsp_ctrls[mix_index].name = conf_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_configurations; @@ -673,7 +671,7 @@ static const struct snd_soc_dai_ops tasdevice_dai_ops = { static struct snd_soc_dai_driver tasdevice_dai_driver[] = { { - .name = "tas2781_codec", + .name = "tasdev_codec", .id = 0, .playback = { .stream_name = "Playback", -- 2.34.1

4 6