- Alsa-devel - mailman.alsa-project.org

[PATCH v1] ASoc: TAS2781: rename the tas2781_reset as tasdevice_reset
by Shenghao Ding 09 Jul '24

09 Jul '24

Rename the tas2781_reset as tasdevice_reset in case of misunderstanding. RESET register for both tas2563 and tas2781 is same and the use of reset pin is also same. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Rename tas2781_reset as tasdevice_reset - Changed the copyright year to 2024 in tas2781.h. - Rename TAS2781_REG_SWRESET_XXX as TASDEVICE_REG_SWRESET_XXX - Add tasdevice_reset into tasdevice_i2c_probe. --- include/sound/tas2781.h | 8 ++++---- sound/pci/hda/tas2781_hda_i2c.c | 4 ++-- sound/soc/codecs/tas2781-comlib.c | 8 ++++---- sound/soc/codecs/tas2781-i2c.c | 2 ++ 4 files changed, 12 insertions(+), 10 deletions(-) diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index cd8ce522b78e..a43ad6dcb7c7 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2563/TAS2781 driver implements a flexible and configurable @@ -43,8 +43,8 @@ (page * 128)) + reg) /*Software Reset */ -#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01) -#define TAS2781_REG_SWRESET_RESET BIT(0) +#define TASDEVICE_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01) +#define TASDEVICE_REG_SWRESET_RESET BIT(0) /*I2C Checksum */ #define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) @@ -140,7 +140,7 @@ struct tasdevice_priv { void (*apply_calibration)(struct tasdevice_priv *tas_priv); }; -void tas2781_reset(struct tasdevice_priv *tas_dev); +void tasdevice_reset(struct tasdevice_priv *tas_dev); int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, struct module *module, void (*cont)(const struct firmware *fw, void *context)); diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 75f7674c66ee..10420360b214 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -834,7 +834,7 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt) pm_runtime_set_active(tas_hda->dev); pm_runtime_enable(tas_hda->dev); - tas2781_reset(tas_hda->priv); + tasdevice_reset(tas_hda->priv); ret = component_add(tas_hda->dev, &tas2781_hda_comp_ops); if (ret) { @@ -929,7 +929,7 @@ static int tas2781_system_resume(struct device *dev) tas_hda->priv->tasdevice[i].cur_prog = -1; tas_hda->priv->tasdevice[i].cur_conf = -1; } - tas2781_reset(tas_hda->priv); + tasdevice_reset(tas_hda->priv); tasdevice_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog); /* If calibrated data occurs error, dsp will still work with default diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 6db1a260da82..1fbf4560f5cc 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -243,7 +243,7 @@ struct tasdevice_priv *tasdevice_kzalloc(struct i2c_client *i2c) } EXPORT_SYMBOL_GPL(tasdevice_kzalloc); -void tas2781_reset(struct tasdevice_priv *tas_dev) +void tasdevice_reset(struct tasdevice_priv *tas_dev) { int ret, i; @@ -254,8 +254,8 @@ void tas2781_reset(struct tasdevice_priv *tas_dev) } else { for (i = 0; i < tas_dev->ndev; i++) { ret = tasdevice_dev_write(tas_dev, i, - TAS2781_REG_SWRESET, - TAS2781_REG_SWRESET_RESET); + TASDEVICE_REG_SWRESET, + TASDEVICE_REG_SWRESET_RESET); if (ret < 0) dev_err(tas_dev->dev, "dev %d swreset fail, %d\n", @@ -264,7 +264,7 @@ void tas2781_reset(struct tasdevice_priv *tas_dev) } usleep_range(1000, 1050); } -EXPORT_SYMBOL_GPL(tas2781_reset); +EXPORT_SYMBOL_GPL(tasdevice_reset); int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, struct module *module, diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index b412f8f2e5d5..d5d95ae57c73 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -742,6 +742,8 @@ static int tasdevice_i2c_probe(struct i2c_client *i2c) if (ret) goto err; + tasdevice_reset(tas_priv); + ret = devm_snd_soc_register_component(tas_priv->dev, &soc_codec_driver_tasdevice, tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); -- 2.34.1

2 1

[PATCH] ASoC: Intel: sof_sdw: Convert comma to semicolon
by Chen Ni 09 Jul '24

09 Jul '24

Replace a comma between expression statements by a semicolon. Signed-off-by: Chen Ni <nichen(a)iscas.ac.cn> --- sound/soc/intel/boards/sof_sdw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index e94849b84a6b..e5feaef669d1 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -2136,9 +2136,9 @@ static int mc_probe(struct platform_device *pdev) card = &ctx->card; card->dev = &pdev->dev; - card->name = "soundwire", - card->owner = THIS_MODULE, - card->late_probe = sof_sdw_card_late_probe, + card->name = "soundwire"; + card->owner = THIS_MODULE; + card->late_probe = sof_sdw_card_late_probe; snd_soc_card_set_drvdata(card, ctx); -- 2.25.1

2 1

[PATCH] ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
by Animesh Agarwal 09 Jul '24

09 Jul '24

Convert the Cirrus Logic CS4270 audio CODEC bindings to DT schema. Add missing va-supply, vd-supply and vlc-supply properties, because they are already being used in the DTS and the driver for this device. Cc: Daniel Baluta <daniel.baluta(a)nxp.com> Signed-off-by: Animesh Agarwal <animeshagarwal28(a)gmail.com> --- .../bindings/sound/cirrus,cs4270.yaml | 53 +++++++++++++++++++ .../devicetree/bindings/sound/cs4270.txt | 21 -------- 2 files changed, 53 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml delete mode 100644 Documentation/devicetree/bindings/sound/cs4270.txt diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml new file mode 100644 index 000000000000..824d799ee5ff --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs4270.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS4270 audio CODEC + +maintainers: + - patches(a)opensource.cirrus.com + +description: + The CS4270 is a stereo audio codec. The driver for this device currently only + supports I2C. + +properties: + compatible: + const: cirrus,cs4270 + + reg: + maxItems: 1 + + reset-gpios: + description: + This pin will be deasserted before communication to the codec starts. + maxItems: 1 + + va-supply: + description: Voltage regulator phandle for the VA supply. + + vd-supply: + description: Voltage regulator phandle for the VD supply. + + vlc-supply: + description: Voltage regulator phandle for the VLC supply. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec: cs4270@48 { + compatible = "cirrus,cs4270"; + reg = <0x48>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt deleted file mode 100644 index c33770ec4c3c..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4270.txt +++ /dev/null @@ -1,21 +0,0 @@ -CS4270 audio CODEC - -The driver for this device currently only supports I2C. - -Required properties: - - - compatible : "cirrus,cs4270" - - - reg : the I2C address of the device for I2C - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. - -Example: - -codec: cs4270@48 { - compatible = "cirrus,cs4270"; - reg = <0x48>; -}; -- 2.45.2

2 2

[PATCH AUTOSEL 4.19 2/7] bytcr_rt5640 : inverse jack detect for Archos 101 cesium
by Sasha Levin 09 Jul '24

09 Jul '24

From: Thomas GENTY <tomlohave(a)gmail.com> [ Upstream commit e3209a1827646daaab744aa6a5767b1f57fb5385 ] When headphones are plugged in, they appear absent; when they are removed, they appear present. Add a specific entry in bytcr_rt5640 for this device Signed-off-by: Thomas GENTY <tomlohave(a)gmail.com> Reviewed-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 19f425eb4a40f..16e2ab2903754 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -474,6 +474,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 101 CESIUM"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_JD_NOT_INV | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"), -- 2.43.0

1 0

[PATCH AUTOSEL 5.4 04/11] ASoC: ti: omap-hdmi: Fix too long driver name
by Sasha Levin 09 Jul '24

09 Jul '24

From: Primoz Fiser <primoz.fiser(a)norik.com> [ Upstream commit 524d3f126362b6033e92cbe107ae2158d7fbff94 ] Set driver name to "HDMI". This simplifies the code and gets rid of the following error messages: ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e' Signed-off-by: Primoz Fiser <primoz.fiser(a)norik.com> Acked-by: Peter Ujfalusi <peter.ujfalusi(a)gmail.com> Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/ti/omap-hdmi.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/ti/omap-hdmi.c b/sound/soc/ti/omap-hdmi.c index def2a0ce88863..e4f661c5349ef 100644 --- a/sound/soc/ti/omap-hdmi.c +++ b/sound/soc/ti/omap-hdmi.c @@ -353,11 +353,7 @@ static int omap_hdmi_audio_probe(struct platform_device *pdev) if (!card) return -ENOMEM; - card->name = devm_kasprintf(dev, GFP_KERNEL, - "HDMI %s", dev_name(ad->dssdev)); - if (!card->name) - return -ENOMEM; - + card->name = "HDMI"; card->owner = THIS_MODULE; card->dai_link = devm_kzalloc(dev, sizeof(*(card->dai_link)), GFP_KERNEL); -- 2.43.0

1 0

[PATCH AUTOSEL 5.4 03/11] ASoC: ti: davinci-mcasp: Set min period size using FIFO config
by Sasha Levin 09 Jul '24

09 Jul '24

From: Jai Luthra <j-luthra(a)ti.com> [ Upstream commit c5dcf8ab10606e76c1d8a0ec77f27d84a392e874 ] The minimum period size was enforced to 64 as older devices integrating McASP with EDMA used an internal FIFO of 64 samples. With UDMA based platforms this internal McASP FIFO is optional, as the DMA engine internally does some buffering which is already accounted for when registering the platform. So we should read the actual FIFO configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to 64. Acked-by: Peter Ujfalusi <peter.ujfalusi(a)gmail.com> Signed-off-by: Jai Luthra <j-luthra(a)ti.com> Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/ti/davinci-mcasp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c index 0541071f454bd..9a182e4c7d572 100644 --- a/sound/soc/ti/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -1419,10 +1419,11 @@ static int davinci_mcasp_hw_rule_min_periodsize( { struct snd_interval *period_size = hw_param_interval(params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE); + u8 numevt = *((u8 *)rule->private); struct snd_interval frames; snd_interval_any(&frames); - frames.min = 64; + frames.min = numevt; frames.integer = 1; return snd_interval_refine(period_size, &frames); @@ -1437,6 +1438,7 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream, u32 max_channels = 0; int i, dir, ret; int tdm_slots = mcasp->tdm_slots; + u8 *numevt; /* Do not allow more then one stream per direction */ if (mcasp->substreams[substream->stream]) @@ -1536,9 +1538,12 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream, return ret; } + numevt = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + &mcasp->txnumevt : + &mcasp->rxnumevt; snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, - davinci_mcasp_hw_rule_min_periodsize, NULL, + davinci_mcasp_hw_rule_min_periodsize, numevt, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1); return 0; -- 2.43.0

1 0

[PATCH AUTOSEL 5.4 02/11] bytcr_rt5640 : inverse jack detect for Archos 101 cesium
by Sasha Levin 09 Jul '24

09 Jul '24

From: Thomas GENTY <tomlohave(a)gmail.com> [ Upstream commit e3209a1827646daaab744aa6a5767b1f57fb5385 ] When headphones are plugged in, they appear absent; when they are removed, they appear present. Add a specific entry in bytcr_rt5640 for this device Signed-off-by: Thomas GENTY <tomlohave(a)gmail.com> Reviewed-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index c740dec00f83b..057ecfe2c8b5c 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -465,6 +465,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 101 CESIUM"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_JD_NOT_INV | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"), -- 2.43.0

1 0

[PATCH AUTOSEL 5.10 06/14] ASoC: ti: omap-hdmi: Fix too long driver name
by Sasha Levin 09 Jul '24

09 Jul '24

From: Primoz Fiser <primoz.fiser(a)norik.com> [ Upstream commit 524d3f126362b6033e92cbe107ae2158d7fbff94 ] Set driver name to "HDMI". This simplifies the code and gets rid of the following error messages: ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e' Signed-off-by: Primoz Fiser <primoz.fiser(a)norik.com> Acked-by: Peter Ujfalusi <peter.ujfalusi(a)gmail.com> Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/ti/omap-hdmi.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/ti/omap-hdmi.c b/sound/soc/ti/omap-hdmi.c index 3328c02f93c74..1dfe439d13417 100644 --- a/sound/soc/ti/omap-hdmi.c +++ b/sound/soc/ti/omap-hdmi.c @@ -353,11 +353,7 @@ static int omap_hdmi_audio_probe(struct platform_device *pdev) if (!card) return -ENOMEM; - card->name = devm_kasprintf(dev, GFP_KERNEL, - "HDMI %s", dev_name(ad->dssdev)); - if (!card->name) - return -ENOMEM; - + card->name = "HDMI"; card->owner = THIS_MODULE; card->dai_link = devm_kzalloc(dev, sizeof(*(card->dai_link)), GFP_KERNEL); -- 2.43.0

1 0

[PATCH AUTOSEL 5.10 05/14] ASoC: ti: davinci-mcasp: Set min period size using FIFO config
by Sasha Levin 09 Jul '24

09 Jul '24

From: Jai Luthra <j-luthra(a)ti.com> [ Upstream commit c5dcf8ab10606e76c1d8a0ec77f27d84a392e874 ] The minimum period size was enforced to 64 as older devices integrating McASP with EDMA used an internal FIFO of 64 samples. With UDMA based platforms this internal McASP FIFO is optional, as the DMA engine internally does some buffering which is already accounted for when registering the platform. So we should read the actual FIFO configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to 64. Acked-by: Peter Ujfalusi <peter.ujfalusi(a)gmail.com> Signed-off-by: Jai Luthra <j-luthra(a)ti.com> Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/ti/davinci-mcasp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c index a6b72ad53b434..61ea444f2018d 100644 --- a/sound/soc/ti/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -1441,10 +1441,11 @@ static int davinci_mcasp_hw_rule_min_periodsize( { struct snd_interval *period_size = hw_param_interval(params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE); + u8 numevt = *((u8 *)rule->private); struct snd_interval frames; snd_interval_any(&frames); - frames.min = 64; + frames.min = numevt; frames.integer = 1; return snd_interval_refine(period_size, &frames); @@ -1459,6 +1460,7 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream, u32 max_channels = 0; int i, dir, ret; int tdm_slots = mcasp->tdm_slots; + u8 *numevt; /* Do not allow more then one stream per direction */ if (mcasp->substreams[substream->stream]) @@ -1558,9 +1560,12 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream, return ret; } + numevt = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + &mcasp->txnumevt : + &mcasp->rxnumevt; snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, - davinci_mcasp_hw_rule_min_periodsize, NULL, + davinci_mcasp_hw_rule_min_periodsize, numevt, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1); return 0; -- 2.43.0

1 0

[PATCH AUTOSEL 5.10 03/14] bytcr_rt5640 : inverse jack detect for Archos 101 cesium
by Sasha Levin 09 Jul '24

09 Jul '24

From: Thomas GENTY <tomlohave(a)gmail.com> [ Upstream commit e3209a1827646daaab744aa6a5767b1f57fb5385 ] When headphones are plugged in, they appear absent; when they are removed, they appear present. Add a specific entry in bytcr_rt5640 for this device Signed-off-by: Thomas GENTY <tomlohave(a)gmail.com> Reviewed-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 1d049685e7075..47b581d99da67 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -468,6 +468,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 101 CESIUM"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_JD_NOT_INV | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"), -- 2.43.0

1 0