- Alsa-devel - mailman.alsa-project.org

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 16 Feb '25

16 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> ### Device interface The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are AES3 (S/PDIF) via coax - channels 10 and 11 are AES3 (S/PDIF) via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (output only, 12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring The device exposes all 20 channels in all three playback modes. No hardware controls are available with the current driver. ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK, ADAT Optical Interface - _ADAT OUT_: TOSLINK, ADAT Optical Interface or or S/PDIF - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) - RCA in: AES3 or S/PDIF (automatic detection) - RCA out: configurable for AES3 (_Professional_) or S/PDIF (_Consumer_) - XLR in: AES3 or S/PDIF (automatic detection) - XLR out: AES3 only ### Channel configurations The _HiFi_ use case only exposes the most common channel configurations to limit combinatorial complexity: - Analog line outputs in stereo as well as 4.0 and 5.1 surround, - analog microphone and instrument inputs in mono only, - ADAT Optical outputs and inputs in direct 8‐channel mapping, and - all other outputs and inputs in stereo. [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 16 Feb '25

16 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are AES3 (S/PDIF) via coax - channels 10 and 11 are AES3 (S/PDIF) via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (output only, 12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring The device exposes all 20 channels in all three playback modes. No hardware controls are available with the current driver. ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK, ADAT Optical Interface - _ADAT OUT_: TOSLINK, ADAT Optical Interface or or S/PDIF - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) - RCA in: AES3 or S/PDIF (automatic detection) - RCA out: configurable for AES3 (_Professional_) or S/PDIF (_Consumer_) - XLR in: AES3 or S/PDIF (automatic detection) - XLR out: AES3 only ### Channel configurations The _HiFi_ use case only exposes the most common channel configurations to limit combinatorial complexity: - Analog line outputs in stereo as well as 4.0 and 5.1 surround, - analog microphone and instrument inputs in mono only, - ADAT Optical outputs and inputs in direct 8‐channel mapping, and - all other outputs and inputs in stereo. [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 16 Feb '25

16 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are AES3 (S/PDIF) via coax - channels 10 and 11 are AES3 (S/PDIF) via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (output only, 12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK, ADAT Optical Interface - _ADAT OUT_: TOSLINK, ADAT Optical Interface or or S/PDIF - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) - RCA in: AES3 or S/PDIF (automatic) - RCA out: configurable for AES3 (_Professional_) or S/PDIF (_Consumer_) - XLR in: AES3 or S/PDIF (automatic) - XLR out: AES3 only [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 14 Feb '25

14 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are S/PDIF via coax - channels 10 and 11 are AES/EBU or S/PDIF via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES/EBU L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES/EBU L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK - _ADAT OUT_: TOSLINK - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[GIT PULL] ASoC fixes for v6.14-rc2
by Mark Brown 14 Feb '25

14 Feb '25

The following changes since commit 2014c95afecee3e76ca4a56956a936e23283f05b: Linux 6.14-rc1 (2025-02-02 15:39:26 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.14-rc2 for you to fetch changes up to 571b69f2f9b1ec7cf7d0e9b79e52115a87a869c4: ASoC: imx-audmix: remove cpu_mclk which is from cpu dai device (2025-02-13 11:34:32 +0000) ---------------------------------------------------------------- ASoC: Fixes for v6.14 More fixes and deviec quirks, most of them driver specific including a few SOF robustness fixes. Nothing super remarkable individually. ---------------------------------------------------------------- Bard Liao (2): ASoC: Intel: soc-acpi-intel-tgl-match: declare adr as ull ASoC: Intel: soc-acpi-intel-mtl-match: declare adr as ull Cristian Ciocaltea (4): ASoC: SOF: amd: Add post_fw_run_delay ACP quirk ASoC: SOF: amd: Drop unused includes from Vangogh driver ASoC: SOF: amd: Handle IPC replies before FW_BOOT_COMPLETE ASoC: SOF: amd: Add branch prediction hint in ACP IRQ handler John Keeping (1): ASoC: rockchip: i2s-tdm: fix shift config for SND_SOC_DAIFMT_DSP_[AB] Kuninori Morimoto (4): ASoC: simple-card-utils.c: add missing dlc->of_node ASoC: rsnd: indicate unsupported clock rate ASoC: rsnd: don't indicate warning on rsnd_kctrl_accept_runtime() ASoC: rsnd: adjust convert rate limitation Mark Brown (5): ASoC: Intel: soc-acpi-intel-tgl/mtl-match: declare adr ASoC: rsnd: adjust convert rate in 1% ASoC: SOF: Correct sps->stream and cstream nullity ASoC: Intel: sof_sdw: Add support for new devices ASoC: Intel: soc-acpi-intel-ptl-match typo fixups Nikita Zhandarovich (1): ASoC: fsl_micfil: Enable default case in micfil_set_quality() Peter Ujfalusi (5): ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() ASoC: SOF: pcm: Clear the susbstream pointer to NULL on close ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt712_vb + rt1320 support ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt713_vb_l2_rt1320_l13 Richard Fitzgerald (2): ASoC: Intel: sof_sdw: Add lookup of quirk using PCI subsystem ID ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S14 Shenghao Ding (1): ASoC: tas2781: drop a redundant code Shengjiu Wang (1): ASoC: imx-audmix: remove cpu_mclk which is from cpu dai device Stefan Binding (2): ASoC: cs35l41: Fallback to using HID for system_name if no SUB is available ASoC: cs35l41: Fix acpi_device_hid() not found Terry Cheong (1): ASoC: SOF: Intel: hda: add softdep pre to snd-hda-codec-hdmi module Uday M Bhat (1): ASoC: Intel: sof_sdw: Add support for Fatcat board with BT offload enabled in PTL platform Vitaly Rodionov (1): ASoC: arizona/madera: use fsleep() in up/down DAPM event delays. sound/soc/codecs/arizona.c | 14 +-- sound/soc/codecs/cs35l41.c | 30 ++++-- sound/soc/codecs/madera.c | 10 +- sound/soc/codecs/tas2781-i2c.c | 4 +- sound/soc/codecs/wm5110.c | 8 +- sound/soc/fsl/fsl_micfil.c | 2 + sound/soc/fsl/imx-audmix.c | 31 ------ sound/soc/generic/simple-card-utils.c | 1 + sound/soc/intel/boards/sof_sdw.c | 41 ++++++-- sound/soc/intel/common/soc-acpi-intel-mtl-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-ptl-match.c | 12 +-- sound/soc/intel/common/soc-acpi-intel-tgl-match.c | 16 +-- sound/soc/renesas/rcar/core.c | 14 --- sound/soc/renesas/rcar/rsnd.h | 1 - sound/soc/renesas/rcar/src.c | 116 +++++++++++++++++----- sound/soc/renesas/rcar/ssi.c | 3 +- sound/soc/rockchip/rockchip_i2s_tdm.c | 4 +- sound/soc/sof/amd/acp-ipc.c | 25 +++-- sound/soc/sof/amd/acp.c | 1 + sound/soc/sof/amd/acp.h | 1 + sound/soc/sof/amd/pci-vangogh.c | 2 - sound/soc/sof/amd/vangogh.c | 22 +++- sound/soc/sof/intel/hda-codec.c | 1 + sound/soc/sof/ipc4-topology.c | 12 ++- sound/soc/sof/pcm.c | 2 + sound/soc/sof/stream-ipc.c | 6 +- 26 files changed, 245 insertions(+), 136 deletions(-)

2 1

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 14 Feb '25

14 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are S/PDIF via coax - channels 10 and 11 are AES/EBU or S/PDIF via XLR - channels 12 to 19 are ADAT (8 channels) or S/PDIF (12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES/EBU L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES/EBU L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring ### Physical connector layout #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK - _ADAT OUT_: TOSLINK - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 14 Feb '25

14 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are S/PDIF via coax - channels 10 and 11 are AES/EBU or S/PDIF via XLR - channels 12 to 19 are ADAT (8 channels) or S/PDIF (12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES/EBU L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES/EBU L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring ### Physical connector layout #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK - _ADAT OUT_: TOSLINK - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - opened 13 Feb '25

13 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was opened from illdefined: [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH V4 0/6] soundwire: amd: code improvements and new platform support
by Vijendar Mukunda 13 Feb '25

13 Feb '25

This patch series consists of code improvements and new platform support for ACP7.0 & ACP7.1 platforms. Changes since v3: - Remove extra white line in amd_sdw_manager_start() function. Changes since v2: - Rebase the patch series after dropping the patch which adds conditional check for SoundWire manager device resume when wake event is asserted. Changes since v1: - Drop white line insertion in the code. - Add a conditional check for SoundWire manager device resume when wake event is asserted. - Add new patch to set ACP_PME_EN during runtime suspend sequence - Split the existing implementation of host wake interrupt mask enablement and setting device power state in to two separate patches and refactor set device power state logic. - Drop PME status clear logic. Vijendar Mukunda (6): soundwire: amd: change the soundwire wake enable/disable sequence soundwire: amd: add debug log for soundwire wake event soundwire: amd: add support for ACP7.0 & ACP7.1 platforms soundwire: amd: set device power state during suspend/resume sequence soundwire: amd: set ACP_PME_EN during runtime suspend sequence soundwire: amd: add soundwire host wake interrupt enable/disable sequence drivers/soundwire/amd_manager.c | 149 +++++++++++++++++++++++++++++- drivers/soundwire/amd_manager.h | 26 ++++++ include/linux/soundwire/sdw_amd.h | 2 + 3 files changed, 172 insertions(+), 5 deletions(-) -- 2.34.1

3 8

[PATCH] ASoC: amd: ps: use switch statements for acp pci revision id check
by Vijendar Mukunda 13 Feb '25

13 Feb '25

Use switch statements for acp pci revision id check in SoundWire dma irq handling. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- sound/soc/amd/ps/pci-ps.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/sound/soc/amd/ps/pci-ps.c b/sound/soc/amd/ps/pci-ps.c index 220dca8cba85..2ff8e67c19bd 100644 --- a/sound/soc/amd/ps/pci-ps.c +++ b/sound/soc/amd/ps/pci-ps.c @@ -111,16 +111,21 @@ static short int check_and_handle_sdw_dma_irq(struct acp63_dev_data *adata, u32 stream_id = ACP63_SDW0_AUDIO2_RX; break; } - if (adata->acp_rev >= ACP70_PCI_REV) - adata->acp70_sdw0_dma_intr_stat[stream_id] = 1; - else + switch (adata->acp_rev) { + case ACP63_PCI_REV: adata->acp63_sdw0_dma_intr_stat[stream_id] = 1; - + break; + case ACP70_PCI_REV: + case ACP71_PCI_REV: + adata->acp70_sdw0_dma_intr_stat[stream_id] = 1; + break; + } sdw_dma_irq_flag = 1; } } } - if (adata->acp_rev == ACP63_PCI_REV) { + switch (adata->acp_rev) { + case ACP63_PCI_REV: if (ext_intr_stat1 & ACP63_P1_AUDIO1_RX_THRESHOLD) { writel(ACP63_P1_AUDIO1_RX_THRESHOLD, adata->acp63_base + ACP_EXTERNAL_INTR_STAT1); @@ -133,7 +138,9 @@ static short int check_and_handle_sdw_dma_irq(struct acp63_dev_data *adata, u32 adata->acp63_sdw1_dma_intr_stat[ACP63_SDW1_AUDIO1_TX] = 1; sdw_dma_irq_flag = 1; } - } else { + break; + case ACP70_PCI_REV: + case ACP71_PCI_REV: if (ext_intr_stat1 & ACP70_P1_SDW_DMA_IRQ_MASK) { for (index = ACP70_P1_AUDIO2_RX_THRESHOLD; index <= ACP70_P1_AUDIO0_TX_THRESHOLD; index++) { @@ -166,6 +173,7 @@ static short int check_and_handle_sdw_dma_irq(struct acp63_dev_data *adata, u32 } } } + break; } return sdw_dma_irq_flag; } -- 2.34.1

2 1