- Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: hda/hdmi: Fix the converter allocation for the silent stream
by Jaroslav Kysela 20 Sep '22

20 Sep '22

Track the converters handling the silent stream using a new variable to avoid mixing of the open/close and silent stream use. This change ensures the proper allocation of the converters. Fixes: 5f80d6bd2b01 ("ALSA: hda/hdmi: Fix the converter reuse for the silent stream") Cc: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> --- sound/pci/hda/patch_hdmi.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 4576af4cff90..dc36af2928b7 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -54,6 +54,7 @@ MODULE_PARM_DESC(enable_all_pins, "Forcibly enable all pins"); struct hdmi_spec_per_cvt { hda_nid_t cvt_nid; bool assigned; /* the stream has been assigned */ + bool silent_stream; /* silent stream activated */ unsigned int channels_min; unsigned int channels_max; u32 rates; @@ -977,7 +978,8 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, * of the pin. */ static int hdmi_choose_cvt(struct hda_codec *codec, - int pin_idx, int *cvt_id) + int pin_idx, int *cvt_id, + bool silent) { struct hdmi_spec *spec = codec->spec; struct hdmi_spec_per_pin *per_pin; @@ -992,6 +994,9 @@ static int hdmi_choose_cvt(struct hda_codec *codec, if (per_pin && per_pin->silent_stream) { cvt_idx = cvt_nid_to_cvt_index(codec, per_pin->cvt_nid); + per_cvt = get_cvt(spec, cvt_idx); + if (per_cvt->assigned && !silent) + return -EBUSY; if (cvt_id) *cvt_id = cvt_idx; return 0; @@ -1002,7 +1007,7 @@ static int hdmi_choose_cvt(struct hda_codec *codec, per_cvt = get_cvt(spec, cvt_idx); /* Must not already be assigned */ - if (per_cvt->assigned) + if (per_cvt->assigned || per_cvt->silent_stream) continue; if (per_pin == NULL) break; @@ -1188,7 +1193,7 @@ static int hdmi_pcm_open_no_pin(struct hda_pcm_stream *hinfo, if (pcm_idx < 0) return -EINVAL; - err = hdmi_choose_cvt(codec, -1, &cvt_idx); + err = hdmi_choose_cvt(codec, -1, &cvt_idx, false); if (err) return err; @@ -1256,7 +1261,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, } } - err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx); + err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, false); if (err < 0) goto unlock; @@ -1267,7 +1272,6 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, set_bit(pcm_idx, &spec->pcm_in_use); per_pin = get_pin(spec, pin_idx); per_pin->cvt_nid = per_cvt->cvt_nid; - per_pin->silent_stream = false; hinfo->nid = per_cvt->cvt_nid; /* flip stripe flag for the assigned stream if supported */ @@ -1749,14 +1753,14 @@ static void silent_stream_enable(struct hda_codec *codec, } pin_idx = pin_id_to_pin_index(codec, per_pin->pin_nid, per_pin->dev_id); - err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx); + err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, true); if (err) { codec_err(codec, "hdmi: no free converter to enable silent mode\n"); goto unlock_out; } per_cvt = get_cvt(spec, cvt_idx); - per_cvt->assigned = true; + per_cvt->silent_stream = true; per_pin->cvt_nid = per_cvt->cvt_nid; per_pin->silent_stream = true; @@ -1816,7 +1820,7 @@ static void silent_stream_disable(struct hda_codec *codec, cvt_idx = cvt_nid_to_cvt_index(codec, per_pin->cvt_nid); if (cvt_idx >= 0 && cvt_idx < spec->num_cvts) { per_cvt = get_cvt(spec, cvt_idx); - per_cvt->assigned = false; + per_cvt->silent_stream = false; } if (spec->silent_stream_type == SILENT_STREAM_I915) { -- 2.35.3

3 2

[PATCH 00/11] soundwire: intel: cleanups/fixes before code reorganization
by Bard Liao 20 Sep '22

20 Sep '22

This is a really big cleanup to introduce well defined helpers, prior to a larger code reorganization. Pierre-Louis Bossart (11): soundwire: intel: fix error handling on dai registration issues soundwire: intel: simplify flow and use devm_ for DAI registration soundwire: intel: move DAI registration and debugfs init earlier soundwire: intel: move all PDI initialization under intel_register_dai() soundwire: intel: remove clock_stop parameter in intel_shim_init() soundwire: intel: move shim initialization before power up/down soundwire: intel: remove intel_init() wrapper soundwire: intel: simplify read ops assignment soundwire: intel: introduce intel_shim_check_wake() helper soundwire: intel: introduce helpers to start bus soundwire: intel: add helper to stop bus drivers/soundwire/intel.c | 775 +++++++++++++++++++------------------- 1 file changed, 380 insertions(+), 395 deletions(-) -- 2.25.1

2 12

[PATCH 1/2] soundwire: cadence: Fix error check in cdns_xfer_msg()
by Richard Fitzgerald 20 Sep '22

20 Sep '22

_cdns_xfer_msg() returns an sdw_command_response value, not a negative error code. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/soundwire/cadence_master.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index ca241bbeadd9..3543a923ee6b 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -708,7 +708,7 @@ cdns_xfer_msg(struct sdw_bus *bus, struct sdw_msg *msg) for (i = 0; i < msg->len / CDNS_MCP_CMD_LEN; i++) { ret = _cdns_xfer_msg(cdns, msg, cmd, i * CDNS_MCP_CMD_LEN, CDNS_MCP_CMD_LEN, false); - if (ret < 0) + if (ret != SDW_CMD_OK) goto exit; } -- 2.30.2

3 4

[PATCH] soundwire: cadence: Write to correct address for each FIFO chunk
by Richard Fitzgerald 20 Sep '22

20 Sep '22

_cdns_xfer_msg() must add the fragment offset to msg->addr to get the base target address of each FIFO chunk. Otherwise every chunk will be written to the first 32 register addresses. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/soundwire/cadence_master.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 3ef472049980..ca241bbeadd9 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -569,7 +569,7 @@ _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, } base = CDNS_MCP_CMD_BASE; - addr = msg->addr; + addr = msg->addr + offset; for (i = 0; i < count; i++) { data = FIELD_PREP(CDNS_MCP_CMD_DEV_ADDR, msg->dev_num); -- 2.30.2

3 2

[PATCH v2 1/2] soundwire: qcom: update status from device id 1
by Srinivas Kandagatla 20 Sep '22

20 Sep '22

By default autoenumeration is enabled on QCom SoundWire controller which means the core should not be dealing with device 0 w.r.t enumeration. During Enumeration if SoundWire core sees status[0] as SDW_SLAVE_ATTACHED and start programming the device id, however reading DEVID registers return zeros which does not match to any of the slaves in the list and the core attempts to park this device to Group 13. This results in adding SoundWire device with enumeration address 0:0:0:0 Fix this by not passing device 0 status to SoundWire core. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- Changes since v1: - updated change log and split patch in to two as suggested by Pierre drivers/soundwire/qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index e7f95c41eb70..d3ce580cdeaf 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -448,7 +448,7 @@ static void qcom_swrm_get_device_status(struct qcom_swrm_ctrl *ctrl) ctrl->reg_read(ctrl, SWRM_MCP_SLV_STATUS, &val); ctrl->slave_status = val; - for (i = 0; i <= SDW_MAX_DEVICES; i++) { + for (i = 1; i <= SDW_MAX_DEVICES; i++) { u32 s; s = (val >> (i * 2)); -- 2.21.0

3 4

[PATCH] soundwire: cadence: Don't overwrite msg->buf during write commands
by Richard Fitzgerald 20 Sep '22

20 Sep '22

The buf passed in struct sdw_msg must only be written for a READ, in that case the RDATA part of the response is the data value of the register. For a write command there is no RDATA, and buf should be assumed to be const and unmodifable. The original caller should not expect its data buffer to be corrupted by an sdw_nwrite(). Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/soundwire/cadence_master.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index be9cd47f31ec..3ef472049980 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -544,9 +544,12 @@ cdns_fill_msg_resp(struct sdw_cdns *cdns, return SDW_CMD_IGNORED; } - /* fill response */ - for (i = 0; i < count; i++) - msg->buf[i + offset] = FIELD_GET(CDNS_MCP_RESP_RDATA, cdns->response_buf[i]); + if (msg->flags == SDW_MSG_FLAG_READ) { + /* fill response */ + for (i = 0; i < count; i++) + msg->buf[i + offset] = FIELD_GET(CDNS_MCP_RESP_RDATA, + cdns->response_buf[i]); + } return SDW_CMD_OK; } -- 2.30.2

3 2

[PATCH v4 0/5] soundwire: Fixes for spurious and missing UNATTACH
by Richard Fitzgerald 20 Sep '22

20 Sep '22

The bus and cadence code has several bugs that cause UNATTACH notifications to either be sent spuriously or to be missed. These can be seen occasionally with a single peripheral on the bus, but are much more frequent with multiple peripherals, where several peripherals could change state and report in consecutive PINGs. The root of all of these bugs seems to be a code design flaw that assumed every PING status change would be handled separately. However, PINGs are handled by a workqueue function and there is no guarantee when that function will be scheduled to run or how much CPU time it will receive. PINGs will continue while the work function is handling a snapshot of a previous PING so the code must take account that (a) status could change during the work function and (b) there can be a backlog of changes before the IRQ work function runs again. Tested with 4 peripherals on 1 bus, and 8 peripherals on 2 buses. CHANGES SINCE V3: Fixed minor comment typo in patch #4. Richard Fitzgerald (4): soundwire: bus: Don't lose unattach notifications soundwire: bus: Don't re-enumerate before status is UNATTACHED soundwire: cadence: Fix lost ATTACHED interrupts when enumerating soundwire: bus: Don't exit early if no device IDs were programmed Simon Trimmer (1): soundwire: cadence: fix updating slave status when a bus has multiple peripherals drivers/soundwire/bus.c | 44 +++++++++++++--- drivers/soundwire/cadence_master.c | 80 ++++++++++++++++-------------- 2 files changed, 80 insertions(+), 44 deletions(-) -- 2.30.2

2 6

[PATCH 1/2] ASoC: sunxi: sun4i-codec: silence misleading error in probe
by Mikhail Rudenko 20 Sep '22

20 Sep '22

In the case when a codec device is probed before codec analog controls, snd_soc_register_card() returns -EPROBE_DEFER, resulting in a misleading error message sun4i-codec 1c22c00.codec: Failed to register our card even if the device is probed successfully later. Use dev_err_probe() to demote the above error to a debug message. Signed-off-by: Mikhail Rudenko <mike.rudenko(a)gmail.com> --- sound/soc/sunxi/sun4i-codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index 60712f24ade5..01b461c64d68 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -1825,7 +1825,7 @@ static int sun4i_codec_probe(struct platform_device *pdev) ret = snd_soc_register_card(card); if (ret) { - dev_err(&pdev->dev, "Failed to register our card\n"); + dev_err_probe(&pdev->dev, ret, "Failed to register our card\n"); goto err_assert_reset; } -- 2.37.3

3 8

[PATCH 1/3] ASoC: rt5682s: Reduce coupling of Micbias and Vref2 settings
by derek.fang＠realtek.com 20 Sep '22

20 Sep '22

From: Derek Fang <derek.fang(a)realtek.com> Some parts of rt5682s CCF function are implemented by 'MICBIAS' and 'Vref2' dapm widgets. There is a risk of causing not expected behavior if we mix using dapm and CCF operations in machine specific code. This patch reduces the coupling. Signed-off-by: Derek Fang <derek.fang(a)realtek.com> --- sound/soc/codecs/rt5682s.c | 54 ++++++++++++++++++-------------------- sound/soc/codecs/rt5682s.h | 2 ++ 2 files changed, 28 insertions(+), 28 deletions(-) diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index eb47e7cd485a..c5c55d146ddf 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -739,6 +739,7 @@ static void rt5682s_disable_push_button_irq(struct snd_soc_component *component) */ static int rt5682s_headset_detect(struct snd_soc_component *component, int jack_insert) { + struct rt5682s_priv *rt5682s = snd_soc_component_get_drvdata(component); unsigned int val, count; int jack_type = 0; @@ -805,12 +806,10 @@ static int rt5682s_headset_detect(struct snd_soc_component *component, int jack_ snd_soc_component_update_bits(component, RT5682S_CBJ_CTRL_1, RT5682S_TRIG_JD_MASK, RT5682S_TRIG_JD_LOW); - if (!snd_soc_dapm_get_pin_status(&component->dapm, "MICBIAS")) - snd_soc_component_update_bits(component, - RT5682S_PWR_ANLG_1, RT5682S_PWR_MB, 0); - if (!snd_soc_dapm_get_pin_status(&component->dapm, "Vref2")) + if (!rt5682s->wclk_enabled) { snd_soc_component_update_bits(component, - RT5682S_PWR_ANLG_1, RT5682S_PWR_VREF2, 0); + RT5682S_PWR_ANLG_1, RT5682S_PWR_VREF2 | RT5682S_PWR_MB, 0); + } snd_soc_component_update_bits(component, RT5682S_PWR_ANLG_3, RT5682S_PWR_CBJ, 0); @@ -845,6 +844,7 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) snd_soc_dapm_mutex_lock(dapm); mutex_lock(&rt5682s->calibrate_mutex); + mutex_lock(&rt5682s->wclk_mutex); val = snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) & RT5682S_JDH_RS_MASK; @@ -900,6 +900,7 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) rt5682s->irq_work_delay_time = 50; } + mutex_unlock(&rt5682s->wclk_mutex); mutex_unlock(&rt5682s->calibrate_mutex); snd_soc_dapm_mutex_unlock(dapm); @@ -1218,13 +1219,9 @@ static int set_dmic_power(struct snd_soc_dapm_widget *w, break; case SND_SOC_DAPM_POST_PMD: - if (!rt5682s->jack_type) { - if (!snd_soc_dapm_get_pin_status(w->dapm, "MICBIAS")) - snd_soc_component_update_bits(component, - RT5682S_PWR_ANLG_1, RT5682S_PWR_MB, 0); - if (!snd_soc_dapm_get_pin_status(w->dapm, "Vref2")) - snd_soc_component_update_bits(component, - RT5682S_PWR_ANLG_1, RT5682S_PWR_VREF2, 0); + if (!rt5682s->jack_type && !rt5682s->wclk_enabled) { + snd_soc_component_update_bits(component, RT5682S_PWR_ANLG_1, + RT5682S_PWR_VREF2 | RT5682S_PWR_MB, 0); } break; } @@ -1615,8 +1612,6 @@ static const struct snd_soc_dapm_widget rt5682s_dapm_widgets[] = { RT5682S_PWR_LDO_MB2_BIT, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("LDO", RT5682S_PWR_ANLG_3, RT5682S_PWR_LDO_BIT, 0, NULL, 0), - SND_SOC_DAPM_SUPPLY("Vref2", SND_SOC_NOPM, 0, 0, NULL, 0), - SND_SOC_DAPM_SUPPLY("MICBIAS", SND_SOC_NOPM, 0, 0, NULL, 0), /* PLL Powers */ SND_SOC_DAPM_SUPPLY_S("PLLA_LDO", 0, RT5682S_PWR_ANLG_3, @@ -2469,19 +2464,21 @@ static int rt5682s_wclk_prepare(struct clk_hw *hw) if (!rt5682s_clk_check(rt5682s)) return -EINVAL; - snd_soc_dapm_mutex_lock(dapm); - - snd_soc_dapm_force_enable_pin_unlocked(dapm, "MICBIAS"); - snd_soc_component_update_bits(component, RT5682S_PWR_ANLG_1, - RT5682S_PWR_MB, RT5682S_PWR_MB); + mutex_lock(&rt5682s->wclk_mutex); - snd_soc_dapm_force_enable_pin_unlocked(dapm, "Vref2"); snd_soc_component_update_bits(component, RT5682S_PWR_ANLG_1, - RT5682S_PWR_VREF2 | RT5682S_PWR_FV2, RT5682S_PWR_VREF2); + RT5682S_PWR_VREF2 | RT5682S_PWR_FV2 | RT5682S_PWR_MB, + RT5682S_PWR_VREF2 | RT5682S_PWR_MB); usleep_range(15000, 20000); snd_soc_component_update_bits(component, RT5682S_PWR_ANLG_1, RT5682S_PWR_FV2, RT5682S_PWR_FV2); + rt5682s->wclk_enabled = 1; + + mutex_unlock(&rt5682s->wclk_mutex); + + snd_soc_dapm_mutex_lock(dapm); + snd_soc_dapm_force_enable_pin_unlocked(dapm, "I2S1"); /* Only need to power PLLB due to the rate set restriction */ snd_soc_dapm_force_enable_pin_unlocked(dapm, "PLLB"); @@ -2502,14 +2499,18 @@ static void rt5682s_wclk_unprepare(struct clk_hw *hw) if (!rt5682s_clk_check(rt5682s)) return; - snd_soc_dapm_mutex_lock(dapm); + mutex_lock(&rt5682s->wclk_mutex); - snd_soc_dapm_disable_pin_unlocked(dapm, "MICBIAS"); - snd_soc_dapm_disable_pin_unlocked(dapm, "Vref2"); if (!rt5682s->jack_type) snd_soc_component_update_bits(component, RT5682S_PWR_ANLG_1, RT5682S_PWR_VREF2 | RT5682S_PWR_FV2 | RT5682S_PWR_MB, 0); + rt5682s->wclk_enabled = 0; + + mutex_unlock(&rt5682s->wclk_mutex); + + snd_soc_dapm_mutex_lock(dapm); + snd_soc_dapm_disable_pin_unlocked(dapm, "I2S1"); snd_soc_dapm_disable_pin_unlocked(dapm, "PLLB"); snd_soc_dapm_sync_unlocked(dapm); @@ -2805,7 +2806,6 @@ static inline int rt5682s_dai_probe_clks(struct snd_soc_component *component) static int rt5682s_probe(struct snd_soc_component *component) { struct rt5682s_priv *rt5682s = snd_soc_component_get_drvdata(component); - struct snd_soc_dapm_context *dapm = &component->dapm; int ret; rt5682s->component = component; @@ -2814,9 +2814,6 @@ static int rt5682s_probe(struct snd_soc_component *component) if (ret) return ret; - snd_soc_dapm_disable_pin(dapm, "MICBIAS"); - snd_soc_dapm_disable_pin(dapm, "Vref2"); - snd_soc_dapm_sync(dapm); return 0; } @@ -3113,6 +3110,7 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c) mutex_init(&rt5682s->calibrate_mutex); mutex_init(&rt5682s->sar_mutex); + mutex_init(&rt5682s->wclk_mutex); rt5682s_calibrate(rt5682s); regmap_update_bits(rt5682s->regmap, RT5682S_MICBIAS_2, diff --git a/sound/soc/codecs/rt5682s.h b/sound/soc/codecs/rt5682s.h index 7353831c73dd..824dc6543c18 100644 --- a/sound/soc/codecs/rt5682s.h +++ b/sound/soc/codecs/rt5682s.h @@ -1450,6 +1450,7 @@ struct rt5682s_priv { struct delayed_work jd_check_work; struct mutex calibrate_mutex; struct mutex sar_mutex; + struct mutex wclk_mutex; #ifdef CONFIG_COMMON_CLK struct clk_hw dai_clks_hw[RT5682S_DAI_NUM_CLKS]; @@ -1469,6 +1470,7 @@ struct rt5682s_priv { int jack_type; int irq_work_delay_time; + int wclk_enabled; }; int rt5682s_sel_asrc_clk_src(struct snd_soc_component *component, -- 2.17.1

2 3

[PATCH v10 2/2] ASoC: sun50i-dmic: dt-bindings: add DT bindings for DMIC controller
by Ban Tao 20 Sep '22

20 Sep '22

DT binding documentation for this new ASoC driver. Signed-off-by: Ban Tao <fengzheng923(a)gmail.com> Reviewed-by: Rob Herring <robh(a)kernel.org> Reviewed-by: Maxime Ripard <maxime(a)cerno.tech> --- v1->v2: 1.Fix some build errors. v2->v3: 1.Fix some build errors. v3->v4: 1.None. v4->v5: 1.Add interrupt. 2.Keep clock and reset index. v5->v6: 1.None. v6->v7: 1.None. v7->v8: 1.Fix some build errors. v8->v9: 1.None. v9->v10: 1.Put compatible first in the list of properties. --- .../bindings/sound/allwinner,sun50i-h6-dmic.yaml | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml new file mode 100644 index 0000000..2f12cab --- /dev/null +++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/allwinner,sun50i-h6-dmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H6 DMIC + +maintainers: + - Ban Tao <fengzheng923(a)gmail.com> + +properties: + compatible: + const: allwinner,sun50i-h6-dmic + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + dmas: + items: + - description: RX DMA Channel + + dma-names: + items: + - const: rx + + resets: + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + #include <dt-bindings/clock/sun50i-h6-ccu.h> + #include <dt-bindings/reset/sun50i-h6-ccu.h> + + dmic: dmic@5095000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-h6-dmic"; + reg = <0x05095000 0x400>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMIC>, <&ccu CLK_DMIC>; + clock-names = "bus", "mod"; + dmas = <&dma 7>; + dma-names = "rx"; + resets = <&ccu RST_BUS_DMIC>; + }; + +... -- 2.7.4

2 1