- Alsa-devel - mailman.alsa-project.org

[PATCH 00/15] ASoC: Intel: avs: Fixes and new boards support
by Cezary Rojewski 10 Oct '22

10 Oct '22

Two fixes are leading the way - one addresses the incorrect DMA mask assignment (typo) at driver probe. The other, fixes a potential buffer overflow when copying data received from firmware to kernel buffer. However unlikely, the fix should still be there. Then a range of patches providing the support for: - AML with rt286 (machine board) - KBL-R for rt298 (codec) - KBL-R with rt298 (machine board) - APL/KBL with da7219 (machine board) - Addition of all the missing SKL-based PCI ids to core.c Of the remaining changes, only one stands out - special case is provided for "unsupported" IPCs. The driver supports a range of platforms, however, on some generations given IPC may not be supported. Such call shall not be treated as "invalid" - those are two different scenarios. Everything else in the patchset is mostly a readability improvement: spelling fixes and log messages issues, code simplification. Amadeusz Sławiński (4): ASoC: codecs: rt298: Add quirk for KBL-R RVP platform ASoC: Intel: avs: Add quirk for KBL-R RVP platform ASoC: Intel: avs: Support da7219 on both KBL and APL ASoC: Intel: avs: Add missing include to HDA board Cezary Rojewski (11): ASoC: Intel: avs: Fix DMA mask assignment ASoC: Intel: avs: Fix potential RX buffer overflow ASoC: Intel: avs: Support AML with rt286 configuration ASoC: Intel: avs: Add missing SKL-based device IDs ASoC: Intel: avs: Simplify d0ix disabling routine ASoC: Intel: avs: Do not reuse msg between different IPC handlers ASoC: Intel: avs: Do not treat unsupported IPCs as invalid ASoC: Intel: avs: Do not print IPC error message twice ASoC: Intel: avs: Simplify ignore_fw_version description ASoC: Intel: avs: Simplify log control for SKL ASoC: codecs: hda: Fix spelling error in log message sound/soc/codecs/hda.c | 2 +- sound/soc/codecs/rt298.c | 7 +++++++ sound/soc/intel/avs/apl.c | 6 ++++-- sound/soc/intel/avs/avs.h | 4 +++- sound/soc/intel/avs/board_selection.c | 6 ++++++ sound/soc/intel/avs/boards/da7219.c | 6 +++++- sound/soc/intel/avs/boards/hdaudio.c | 1 + sound/soc/intel/avs/boards/rt298.c | 24 ++++++++++++++++++++++-- sound/soc/intel/avs/core.c | 6 +++++- sound/soc/intel/avs/ipc.c | 5 +++-- sound/soc/intel/avs/loader.c | 2 +- sound/soc/intel/avs/messages.c | 19 ++++--------------- sound/soc/intel/avs/messages.h | 2 ++ sound/soc/intel/avs/skl.c | 4 ++-- 14 files changed, 66 insertions(+), 28 deletions(-) -- 2.25.1

1 16

[PATCH -next 0/3] Revert old "Fix PM disable depth imbalance in wmxxxx_probe"
by Zhang Qilong 10 Oct '22

10 Oct '22

Both the old and new patch have been applied, it will resulted in redundant calling of pm_runtime_disable when error returns. We Just revert the old three patches to fix it. Zhang Qilong (3): Revert "ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe" Revert "ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe" Revert "ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe" sound/soc/codecs/wm5102.c | 6 +++--- sound/soc/codecs/wm5110.c | 6 +++--- sound/soc/codecs/wm8997.c | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-) -- 2.25.1

3 5

[PATCH AUTOSEL 5.4 05/14] ALSA: usb-audio: Add quirk to enable Avid Mbox 3 support
by Sasha Levin 10 Oct '22

10 Oct '22

From: Conner Knox <connerknoxpublic(a)gmail.com> [ Upstream commit b01104fc62b6194c852124f6c6df1c0a5c031fc1 ] Add support for Avid Mbox3 USB audio interface at 48kHz Signed-off-by: Conner Knox <connerknoxpublic(a)gmail.com> Link: https://lore.kernel.org/r/20220818201433.16360-1-mbarriolinares@gmail.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/quirks-table.h | 76 ++++++++++ sound/usb/quirks.c | 302 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 378 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index c29ccdf9e8bc..79c97bde81fd 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3175,6 +3175,82 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } } }, +/* DIGIDESIGN MBOX 3 */ +{ + USB_DEVICE(0x0dba, 0x5000), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Digidesign", + .product_name = "Mbox 3", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 2, + .altsetting = 1, + .altset_idx = 1, + .attributes = 0x00, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 3, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 3, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x81, + .attributes = 0x00, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .maxpacksize = 0x009c, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 4, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = &(const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } + } + } +}, { /* Tascam US122 MKII - playback-only support */ .match_flags = USB_DEVICE_ID_MATCH_DEVICE, diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 72223545abfd..1d317ae2929d 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1018,6 +1018,304 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) return 0; } +static void mbox3_setup_48_24_magic(struct usb_device *dev) +{ + /* The Mbox 3 is "little endian" */ + /* max volume is: 0x0000. */ + /* min volume is: 0x0080 (shown in little endian form) */ + + + /* Load 48000Hz rate into buffer */ + u8 com_buff[4] = {0x80, 0xbb, 0x00, 0x00}; + + /* Set 48000Hz sample rate */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x0001, &com_buff, 4); //Is this really needed? + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x8101, &com_buff, 4); + + /* Deactivate Tuner */ + /* on = 0x01*/ + /* off = 0x00*/ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0003, 0x2001, &com_buff, 1); + + /* Set clock source to Internal (as opposed to S/PDIF) */ + com_buff[0] = 0x01; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x8001, &com_buff, 1); + + /* Mute the hardware loopbacks to start the device in a known state. */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue input 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0110, 0x4001, &com_buff, 2); + /* Analogue input 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0111, 0x4001, &com_buff, 2); + /* Analogue input 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0114, 0x4001, &com_buff, 2); + /* Analogue input 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0115, 0x4001, &com_buff, 2); + /* Analogue input 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0118, 0x4001, &com_buff, 2); + /* Analogue input 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0119, 0x4001, &com_buff, 2); + /* Analogue input 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011c, 0x4001, &com_buff, 2); + /* Analogue input 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011d, 0x4001, &com_buff, 2); + + /* Set software sends to output */ + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* Analogue software return 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* Analogue software return 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0108, 0x4001, &com_buff, 2); + /* Analogue software return 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0109, 0x4001, &com_buff, 2); + /* Analogue software return 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010c, 0x4001, &com_buff, 2); + /* Analogue software return 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010d, 0x4001, &com_buff, 2); + + /* Return to muting sends */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue fx return left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0120, 0x4001, &com_buff, 2); + /* Analogue fx return right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0121, 0x4001, &com_buff, 2); + + /* Analogue software input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4201, &com_buff, 2); + /* Analogue software input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4201, &com_buff, 2); + /* Analogue software input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4201, &com_buff, 2); + /* Analogue software input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4201, &com_buff, 2); + /* Analogue input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4201, &com_buff, 2); + /* Analogue input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4201, &com_buff, 2); + /* Analogue input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4201, &com_buff, 2); + /* Analogue input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4201, &com_buff, 2); + + /* Toggle allowing host control */ + com_buff[0] = 0x02; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0000, 0x2001, &com_buff, 1); + + /* Do not dim fx returns */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0002, 0x2001, &com_buff, 1); + + /* Do not set fx returns to mono */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0001, 0x2001, &com_buff, 1); + + /* Mute the S/PDIF hardware loopback + * same odd volume logic here as above + */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF hardware input 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0112, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0113, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0116, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0117, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011a, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011b, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011e, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011f, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* S/PDIF software return 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010a, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF software return 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010b, 0x4001, &com_buff, 2); + /* S/PDIF software return 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010e, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* S/PDIF software return 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010f, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF fx returns left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0122, 0x4001, &com_buff, 2); + /* S/PDIF fx returns right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0123, 0x4001, &com_buff, 2); + + /* Set the dropdown "Effect" to the first option */ + /* Room1 = 0x00 */ + /* Room2 = 0x01 */ + /* Room3 = 0x02 */ + /* Hall 1 = 0x03 */ + /* Hall 2 = 0x04 */ + /* Plate = 0x05 */ + /* Delay = 0x06 */ + /* Echo = 0x07 */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0200, 0x4301, &com_buff, 1); /* max is 0xff */ + /* min is 0x00 */ + + + /* Set the effect duration to 0 */ + /* max is 0xffff */ + /* min is 0x0000 */ + com_buff[0] = 0x00; + com_buff[1] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0400, 0x4301, &com_buff, 2); + + /* Set the effect volume and feedback to 0 */ + /* max is 0xff */ + /* min is 0x00 */ + com_buff[0] = 0x00; + /* feedback: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0500, 0x4301, &com_buff, 1); + /* volume: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0300, 0x4301, &com_buff, 1); + + /* Set soft button hold duration */ + /* 0x03 = 250ms */ + /* 0x05 = 500ms DEFAULT */ + /* 0x08 = 750ms */ + /* 0x0a = 1sec */ + com_buff[0] = 0x05; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0005, 0x2001, &com_buff, 1); + + /* Use dim LEDs for button of state */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0004, 0x2001, &com_buff, 1); +} + +#define MBOX3_DESCRIPTOR_SIZE 464 + +static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) +{ + struct usb_host_config *config = dev->actconfig; + int err; + int descriptor_size; + + descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength); + + if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) { + dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size); + return -ENODEV; + } + + dev_dbg(&dev->dev, "device initialised!\n"); + + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, + &dev->descriptor, sizeof(dev->descriptor)); + config = dev->actconfig; + if (err < 0) + dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); + + err = usb_reset_configuration(dev); + if (err < 0) + dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); + dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n", + le16_to_cpu(get_cfg_desc(config)->wTotalLength)); + + mbox3_setup_48_24_magic(dev); + dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz"); + + return 0; /* Successful boot */ +} #define MICROBOOK_BUF_SIZE 128 @@ -1304,6 +1602,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, case USB_ID(0x0dba, 0x3000): /* Digidesign Mbox 2 */ return snd_usb_mbox2_boot_quirk(dev); + case USB_ID(0x0dba, 0x5000): + /* Digidesign Mbox 3 */ + return snd_usb_mbox3_boot_quirk(dev); + case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */ case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */ -- 2.35.1

1 0

[PATCH AUTOSEL 5.10 15/22] ASoC: SOF: pci: Change DMI match info to support all Chrome platforms
by Sasha Levin 10 Oct '22

10 Oct '22

From: Jairaj Arava <jairaj.arava(a)intel.com> [ Upstream commit c1c1fc8103f794a10c5c15e3c17879caf4f42c8f ] In some Chrome platforms if OEM's use their own string as SYS_VENDOR than "Google", it leads to firmware load failure from intel/sof/community path. Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used as common prefix and is supported in all Chrome platforms. Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Chao Song <chao.song(a)intel.com> Reviewed-by: Curtis Malainey <curtis(a)malainey.com> Signed-off-by: Jairaj Arava <jairaj.arava(a)intel.com> Signed-off-by: Curtis Malainey <cujomalainey(a)chromium.org> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20220919114429.42700-1-pierre-louis.bossart@linux… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/sof-pci-dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c index 75657a25dbc0..fe9feaab6a0a 100644 --- a/sound/soc/sof/sof-pci-dev.c +++ b/sound/soc/sof/sof-pci-dev.c @@ -75,7 +75,7 @@ static const struct dmi_system_id community_key_platforms[] = { { .ident = "Google Chromebooks", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Google"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "Google"), } }, {}, -- 2.35.1

1 0

[PATCH AUTOSEL 5.10 06/22] ALSA: usb-audio: Add quirk to enable Avid Mbox 3 support
by Sasha Levin 10 Oct '22

10 Oct '22

From: Conner Knox <connerknoxpublic(a)gmail.com> [ Upstream commit b01104fc62b6194c852124f6c6df1c0a5c031fc1 ] Add support for Avid Mbox3 USB audio interface at 48kHz Signed-off-by: Conner Knox <connerknoxpublic(a)gmail.com> Link: https://lore.kernel.org/r/20220818201433.16360-1-mbarriolinares@gmail.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/quirks-table.h | 76 ++++++++++ sound/usb/quirks.c | 302 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 378 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 1ac91c46da3c..a7f065567190 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3021,6 +3021,82 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } } }, +/* DIGIDESIGN MBOX 3 */ +{ + USB_DEVICE(0x0dba, 0x5000), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Digidesign", + .product_name = "Mbox 3", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 2, + .altsetting = 1, + .altset_idx = 1, + .attributes = 0x00, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 3, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 3, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x81, + .attributes = 0x00, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .maxpacksize = 0x009c, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 4, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = &(const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } + } + } +}, { /* Tascam US122 MKII - playback-only support */ USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021), diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 41f5d8242478..b571a9c9c319 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1024,6 +1024,304 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) return 0; } +static void mbox3_setup_48_24_magic(struct usb_device *dev) +{ + /* The Mbox 3 is "little endian" */ + /* max volume is: 0x0000. */ + /* min volume is: 0x0080 (shown in little endian form) */ + + + /* Load 48000Hz rate into buffer */ + u8 com_buff[4] = {0x80, 0xbb, 0x00, 0x00}; + + /* Set 48000Hz sample rate */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x0001, &com_buff, 4); //Is this really needed? + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x8101, &com_buff, 4); + + /* Deactivate Tuner */ + /* on = 0x01*/ + /* off = 0x00*/ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0003, 0x2001, &com_buff, 1); + + /* Set clock source to Internal (as opposed to S/PDIF) */ + com_buff[0] = 0x01; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x8001, &com_buff, 1); + + /* Mute the hardware loopbacks to start the device in a known state. */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue input 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0110, 0x4001, &com_buff, 2); + /* Analogue input 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0111, 0x4001, &com_buff, 2); + /* Analogue input 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0114, 0x4001, &com_buff, 2); + /* Analogue input 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0115, 0x4001, &com_buff, 2); + /* Analogue input 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0118, 0x4001, &com_buff, 2); + /* Analogue input 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0119, 0x4001, &com_buff, 2); + /* Analogue input 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011c, 0x4001, &com_buff, 2); + /* Analogue input 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011d, 0x4001, &com_buff, 2); + + /* Set software sends to output */ + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* Analogue software return 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* Analogue software return 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0108, 0x4001, &com_buff, 2); + /* Analogue software return 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0109, 0x4001, &com_buff, 2); + /* Analogue software return 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010c, 0x4001, &com_buff, 2); + /* Analogue software return 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010d, 0x4001, &com_buff, 2); + + /* Return to muting sends */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue fx return left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0120, 0x4001, &com_buff, 2); + /* Analogue fx return right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0121, 0x4001, &com_buff, 2); + + /* Analogue software input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4201, &com_buff, 2); + /* Analogue software input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4201, &com_buff, 2); + /* Analogue software input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4201, &com_buff, 2); + /* Analogue software input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4201, &com_buff, 2); + /* Analogue input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4201, &com_buff, 2); + /* Analogue input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4201, &com_buff, 2); + /* Analogue input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4201, &com_buff, 2); + /* Analogue input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4201, &com_buff, 2); + + /* Toggle allowing host control */ + com_buff[0] = 0x02; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0000, 0x2001, &com_buff, 1); + + /* Do not dim fx returns */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0002, 0x2001, &com_buff, 1); + + /* Do not set fx returns to mono */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0001, 0x2001, &com_buff, 1); + + /* Mute the S/PDIF hardware loopback + * same odd volume logic here as above + */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF hardware input 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0112, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0113, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0116, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0117, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011a, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011b, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011e, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011f, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* S/PDIF software return 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010a, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF software return 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010b, 0x4001, &com_buff, 2); + /* S/PDIF software return 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010e, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* S/PDIF software return 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010f, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF fx returns left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0122, 0x4001, &com_buff, 2); + /* S/PDIF fx returns right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0123, 0x4001, &com_buff, 2); + + /* Set the dropdown "Effect" to the first option */ + /* Room1 = 0x00 */ + /* Room2 = 0x01 */ + /* Room3 = 0x02 */ + /* Hall 1 = 0x03 */ + /* Hall 2 = 0x04 */ + /* Plate = 0x05 */ + /* Delay = 0x06 */ + /* Echo = 0x07 */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0200, 0x4301, &com_buff, 1); /* max is 0xff */ + /* min is 0x00 */ + + + /* Set the effect duration to 0 */ + /* max is 0xffff */ + /* min is 0x0000 */ + com_buff[0] = 0x00; + com_buff[1] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0400, 0x4301, &com_buff, 2); + + /* Set the effect volume and feedback to 0 */ + /* max is 0xff */ + /* min is 0x00 */ + com_buff[0] = 0x00; + /* feedback: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0500, 0x4301, &com_buff, 1); + /* volume: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0300, 0x4301, &com_buff, 1); + + /* Set soft button hold duration */ + /* 0x03 = 250ms */ + /* 0x05 = 500ms DEFAULT */ + /* 0x08 = 750ms */ + /* 0x0a = 1sec */ + com_buff[0] = 0x05; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0005, 0x2001, &com_buff, 1); + + /* Use dim LEDs for button of state */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0004, 0x2001, &com_buff, 1); +} + +#define MBOX3_DESCRIPTOR_SIZE 464 + +static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) +{ + struct usb_host_config *config = dev->actconfig; + int err; + int descriptor_size; + + descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength); + + if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) { + dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size); + return -ENODEV; + } + + dev_dbg(&dev->dev, "device initialised!\n"); + + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, + &dev->descriptor, sizeof(dev->descriptor)); + config = dev->actconfig; + if (err < 0) + dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); + + err = usb_reset_configuration(dev); + if (err < 0) + dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); + dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n", + le16_to_cpu(get_cfg_desc(config)->wTotalLength)); + + mbox3_setup_48_24_magic(dev); + dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz"); + + return 0; /* Successful boot */ +} #define MICROBOOK_BUF_SIZE 128 @@ -1344,6 +1642,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, case USB_ID(0x0dba, 0x3000): /* Digidesign Mbox 2 */ return snd_usb_mbox2_boot_quirk(dev); + case USB_ID(0x0dba, 0x5000): + /* Digidesign Mbox 3 */ + return snd_usb_mbox3_boot_quirk(dev); + case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */ case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */ -- 2.35.1

1 0

[PATCH AUTOSEL 5.15 17/25] ASoC: SOF: pci: Change DMI match info to support all Chrome platforms
by Sasha Levin 10 Oct '22

10 Oct '22

From: Jairaj Arava <jairaj.arava(a)intel.com> [ Upstream commit c1c1fc8103f794a10c5c15e3c17879caf4f42c8f ] In some Chrome platforms if OEM's use their own string as SYS_VENDOR than "Google", it leads to firmware load failure from intel/sof/community path. Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used as common prefix and is supported in all Chrome platforms. Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Chao Song <chao.song(a)intel.com> Reviewed-by: Curtis Malainey <curtis(a)malainey.com> Signed-off-by: Jairaj Arava <jairaj.arava(a)intel.com> Signed-off-by: Curtis Malainey <cujomalainey(a)chromium.org> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20220919114429.42700-1-pierre-louis.bossart@linux… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/sof-pci-dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c index b773289c928d..3b4c011e0283 100644 --- a/sound/soc/sof/sof-pci-dev.c +++ b/sound/soc/sof/sof-pci-dev.c @@ -80,7 +80,7 @@ static const struct dmi_system_id community_key_platforms[] = { { .ident = "Google Chromebooks", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Google"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "Google"), } }, {}, -- 2.35.1

1 0

[PATCH AUTOSEL 5.15 11/25] ALSA: usb-audio: Register card at the last interface
by Sasha Levin 10 Oct '22

10 Oct '22

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 6392dcd1d0c7034ccf630ec55fc9e5810ecadf3b ] The USB-audio driver matches per interface, and as default, it registers the card instance at the very first instance. This can be a problem for the devices that have multiple interfaces to be probed, as the udev rule isn't applied properly for the later appearing interfaces. Although we introduced the delayed_register option and the quirks for covering those shortcomings, it's nothing but a workaround for specific devices. This patch is an another attempt to fix the problem in a more generic way. Now the driver checks the whole USB device descriptor at the very first time when an interface is attached to a sound card. It looks at each matching interface in the descriptor and remembers the last matching one. The snd_card_register() is invoked only when this last interface is probed. After this change, the quirks for the delayed registration become superfluous, hence they are removed along with the patch. OTOH, the delayed_register option is still kept, as it might be useful for some corner cases (e.g. a special driver overtakes the interface probe from the standard driver, and the last interface probe may miss). Link: https://lore.kernel.org/r/20220904161247.16461-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/card.c | 32 +++++++++++++++++++++++++------- sound/usb/quirks.c | 42 ------------------------------------------ sound/usb/quirks.h | 2 -- sound/usb/usbaudio.h | 1 + 4 files changed, 26 insertions(+), 51 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index 713b84d8d42f..207c212eabde 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -689,7 +689,7 @@ static bool get_alias_id(struct usb_device *dev, unsigned int *id) return false; } -static bool check_delayed_register_option(struct snd_usb_audio *chip, int iface) +static int check_delayed_register_option(struct snd_usb_audio *chip) { int i; unsigned int id, inum; @@ -698,14 +698,31 @@ static bool check_delayed_register_option(struct snd_usb_audio *chip, int iface) if (delayed_register[i] && sscanf(delayed_register[i], "%x:%x", &id, &inum) == 2 && id == chip->usb_id) - return iface < inum; + return inum; } - return false; + return -1; } static const struct usb_device_id usb_audio_ids[]; /* defined below */ +/* look for the last interface that matches with our ids and remember it */ +static void find_last_interface(struct snd_usb_audio *chip) +{ + struct usb_host_config *config = chip->dev->actconfig; + struct usb_interface *intf; + int i; + + if (!config) + return; + for (i = 0; i < config->desc.bNumInterfaces; i++) { + intf = config->interface[i]; + if (usb_match_id(intf, usb_audio_ids)) + chip->last_iface = intf->altsetting[0].desc.bInterfaceNumber; + } + usb_audio_dbg(chip, "Found last interface = %d\n", chip->last_iface); +} + /* look for the corresponding quirk */ static const struct snd_usb_audio_quirk * get_alias_quirk(struct usb_device *dev, unsigned int id) @@ -812,6 +829,7 @@ static int usb_audio_probe(struct usb_interface *intf, err = -ENODEV; goto __error; } + find_last_interface(chip); } if (chip->num_interfaces >= MAX_CARD_INTERFACES) { @@ -861,11 +879,11 @@ static int usb_audio_probe(struct usb_interface *intf, chip->need_delayed_register = false; /* clear again */ } - /* we are allowed to call snd_card_register() many times, but first - * check to see if a device needs to skip it or do anything special + /* register card if we reach to the last interface or to the specified + * one given via option */ - if (!snd_usb_registration_quirk(chip, ifnum) && - !check_delayed_register_option(chip, ifnum)) { + if (check_delayed_register_option(chip) == ifnum || + chip->last_iface == ifnum) { err = snd_card_register(chip->card); if (err < 0) goto __error; diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 194c75c45628..eadac586bcc8 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2030,48 +2030,6 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip, } } -/* - * registration quirk: - * the registration is skipped if a device matches with the given ID, - * unless the interface reaches to the defined one. This is for delaying - * the registration until the last known interface, so that the card and - * devices appear at the same time. - */ - -struct registration_quirk { - unsigned int usb_id; /* composed via USB_ID() */ - unsigned int interface; /* the interface to trigger register */ -}; - -#define REG_QUIRK_ENTRY(vendor, product, iface) \ - { .usb_id = USB_ID(vendor, product), .interface = (iface) } - -static const struct registration_quirk registration_quirks[] = { - REG_QUIRK_ENTRY(0x0951, 0x16d8, 2), /* Kingston HyperX AMP */ - REG_QUIRK_ENTRY(0x0951, 0x16ed, 2), /* Kingston HyperX Cloud Alpha S */ - REG_QUIRK_ENTRY(0x0951, 0x16ea, 2), /* Kingston HyperX Cloud Flight S */ - REG_QUIRK_ENTRY(0x0ecb, 0x1f46, 2), /* JBL Quantum 600 */ - REG_QUIRK_ENTRY(0x0ecb, 0x1f47, 2), /* JBL Quantum 800 */ - REG_QUIRK_ENTRY(0x0ecb, 0x1f4c, 2), /* JBL Quantum 400 */ - REG_QUIRK_ENTRY(0x0ecb, 0x2039, 2), /* JBL Quantum 400 */ - REG_QUIRK_ENTRY(0x0ecb, 0x203c, 2), /* JBL Quantum 600 */ - REG_QUIRK_ENTRY(0x0ecb, 0x203e, 2), /* JBL Quantum 800 */ - { 0 } /* terminator */ -}; - -/* return true if skipping registration */ -bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface) -{ - const struct registration_quirk *q; - - for (q = registration_quirks; q->usb_id; q++) - if (chip->usb_id == q->usb_id) - return iface < q->interface; - - /* Register as normal */ - return false; -} - /* * driver behavior quirk flags */ diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h index 31abb7cb01a5..f9bfd5ac7bab 100644 --- a/sound/usb/quirks.h +++ b/sound/usb/quirks.h @@ -48,8 +48,6 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip, struct audioformat *fp, int stream); -bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface); - void snd_usb_init_quirk_flags(struct snd_usb_audio *chip); #endif /* __USBAUDIO_QUIRKS_H */ diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 044cd7ab27cb..39c3c61a7e49 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -37,6 +37,7 @@ struct snd_usb_audio { unsigned int quirk_flags; unsigned int need_delayed_register:1; /* warn for delayed registration */ int num_interfaces; + int last_iface; int num_suspended_intf; int sample_rate_read_error; -- 2.35.1

1 0

[PATCH AUTOSEL 5.15 07/25] ALSA: usb-audio: Add quirk to enable Avid Mbox 3 support
by Sasha Levin 10 Oct '22

10 Oct '22

From: Conner Knox <connerknoxpublic(a)gmail.com> [ Upstream commit b01104fc62b6194c852124f6c6df1c0a5c031fc1 ] Add support for Avid Mbox3 USB audio interface at 48kHz Signed-off-by: Conner Knox <connerknoxpublic(a)gmail.com> Link: https://lore.kernel.org/r/20220818201433.16360-1-mbarriolinares@gmail.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/quirks-table.h | 76 ++++++++++ sound/usb/quirks.c | 302 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 378 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index f93201a830b5..06dfdd45cff8 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2985,6 +2985,82 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +/* DIGIDESIGN MBOX 3 */ +{ + USB_DEVICE(0x0dba, 0x5000), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Digidesign", + .product_name = "Mbox 3", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 2, + .altsetting = 1, + .altset_idx = 1, + .attributes = 0x00, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 3, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 3, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x81, + .attributes = 0x00, + .ep_attr = USB_ENDPOINT_XFER_ISOC | + USB_ENDPOINT_SYNC_ASYNC, + .maxpacksize = 0x009c, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + { + .ifnum = 4, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = &(const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } + } + } +}, { /* Tascam US122 MKII - playback-only support */ USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021), diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 5b4d8f5eade2..194c75c45628 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1020,6 +1020,304 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) return 0; } +static void mbox3_setup_48_24_magic(struct usb_device *dev) +{ + /* The Mbox 3 is "little endian" */ + /* max volume is: 0x0000. */ + /* min volume is: 0x0080 (shown in little endian form) */ + + + /* Load 48000Hz rate into buffer */ + u8 com_buff[4] = {0x80, 0xbb, 0x00, 0x00}; + + /* Set 48000Hz sample rate */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x0001, &com_buff, 4); //Is this really needed? + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0100, 0x8101, &com_buff, 4); + + /* Deactivate Tuner */ + /* on = 0x01*/ + /* off = 0x00*/ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 0x01, 0x21, 0x0003, 0x2001, &com_buff, 1); + + /* Set clock source to Internal (as opposed to S/PDIF) */ + com_buff[0] = 0x01; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x8001, &com_buff, 1); + + /* Mute the hardware loopbacks to start the device in a known state. */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue input 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0110, 0x4001, &com_buff, 2); + /* Analogue input 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0111, 0x4001, &com_buff, 2); + /* Analogue input 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0114, 0x4001, &com_buff, 2); + /* Analogue input 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0115, 0x4001, &com_buff, 2); + /* Analogue input 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0118, 0x4001, &com_buff, 2); + /* Analogue input 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0119, 0x4001, &com_buff, 2); + /* Analogue input 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011c, 0x4001, &com_buff, 2); + /* Analogue input 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011d, 0x4001, &com_buff, 2); + + /* Set software sends to output */ + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* Analogue software return 1 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 1 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 2 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4001, &com_buff, 2); + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* Analogue software return 2 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue software return 3 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0108, 0x4001, &com_buff, 2); + /* Analogue software return 3 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0109, 0x4001, &com_buff, 2); + /* Analogue software return 4 left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010c, 0x4001, &com_buff, 2); + /* Analogue software return 4 right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010d, 0x4001, &com_buff, 2); + + /* Return to muting sends */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* Analogue fx return left channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0120, 0x4001, &com_buff, 2); + /* Analogue fx return right channel: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0121, 0x4001, &com_buff, 2); + + /* Analogue software input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0100, 0x4201, &com_buff, 2); + /* Analogue software input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0101, 0x4201, &com_buff, 2); + /* Analogue software input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4201, &com_buff, 2); + /* Analogue software input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4201, &com_buff, 2); + /* Analogue input 1 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0104, 0x4201, &com_buff, 2); + /* Analogue input 2 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0105, 0x4201, &com_buff, 2); + /* Analogue input 3 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4201, &com_buff, 2); + /* Analogue input 4 fx send: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4201, &com_buff, 2); + + /* Toggle allowing host control */ + com_buff[0] = 0x02; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0000, 0x2001, &com_buff, 1); + + /* Do not dim fx returns */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0002, 0x2001, &com_buff, 1); + + /* Do not set fx returns to mono */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0001, 0x2001, &com_buff, 1); + + /* Mute the S/PDIF hardware loopback + * same odd volume logic here as above + */ + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF hardware input 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0112, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0113, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0116, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0117, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011a, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011b, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011e, 0x4001, &com_buff, 2); + /* S/PDIF hardware input 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x011f, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0102, 0x4001, &com_buff, 2); + /* S/PDIF software return 1 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0103, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0106, 0x4001, &com_buff, 2); + /* S/PDIF software return 2 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0107, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* S/PDIF software return 3 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010a, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF software return 3 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010b, 0x4001, &com_buff, 2); + /* S/PDIF software return 4 left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010e, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x00; + /* S/PDIF software return 4 right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x010f, 0x4001, &com_buff, 2); + + com_buff[0] = 0x00; + com_buff[1] = 0x80; + /* S/PDIF fx returns left channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0122, 0x4001, &com_buff, 2); + /* S/PDIF fx returns right channel */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0123, 0x4001, &com_buff, 2); + + /* Set the dropdown "Effect" to the first option */ + /* Room1 = 0x00 */ + /* Room2 = 0x01 */ + /* Room3 = 0x02 */ + /* Hall 1 = 0x03 */ + /* Hall 2 = 0x04 */ + /* Plate = 0x05 */ + /* Delay = 0x06 */ + /* Echo = 0x07 */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0200, 0x4301, &com_buff, 1); /* max is 0xff */ + /* min is 0x00 */ + + + /* Set the effect duration to 0 */ + /* max is 0xffff */ + /* min is 0x0000 */ + com_buff[0] = 0x00; + com_buff[1] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0400, 0x4301, &com_buff, 2); + + /* Set the effect volume and feedback to 0 */ + /* max is 0xff */ + /* min is 0x00 */ + com_buff[0] = 0x00; + /* feedback: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0500, 0x4301, &com_buff, 1); + /* volume: */ + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 1, 0x21, 0x0300, 0x4301, &com_buff, 1); + + /* Set soft button hold duration */ + /* 0x03 = 250ms */ + /* 0x05 = 500ms DEFAULT */ + /* 0x08 = 750ms */ + /* 0x0a = 1sec */ + com_buff[0] = 0x05; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0005, 0x2001, &com_buff, 1); + + /* Use dim LEDs for button of state */ + com_buff[0] = 0x00; + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + 3, 0x21, 0x0004, 0x2001, &com_buff, 1); +} + +#define MBOX3_DESCRIPTOR_SIZE 464 + +static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) +{ + struct usb_host_config *config = dev->actconfig; + int err; + int descriptor_size; + + descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength); + + if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) { + dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size); + return -ENODEV; + } + + dev_dbg(&dev->dev, "device initialised!\n"); + + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, + &dev->descriptor, sizeof(dev->descriptor)); + config = dev->actconfig; + if (err < 0) + dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); + + err = usb_reset_configuration(dev); + if (err < 0) + dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); + dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n", + le16_to_cpu(get_cfg_desc(config)->wTotalLength)); + + mbox3_setup_48_24_magic(dev); + dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz"); + + return 0; /* Successful boot */ +} #define MICROBOOK_BUF_SIZE 128 @@ -1324,6 +1622,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, case USB_ID(0x0dba, 0x3000): /* Digidesign Mbox 2 */ return snd_usb_mbox2_boot_quirk(dev); + case USB_ID(0x0dba, 0x5000): + /* Digidesign Mbox 3 */ + return snd_usb_mbox3_boot_quirk(dev); + case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */ case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */ -- 2.35.1

1 0

[PATCH AUTOSEL 5.19 24/36] ASoC: SOF: add quirk to override topology mclk_id
by Sasha Levin 10 Oct '22

10 Oct '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit d136949dd8e2e309dc2f186507486b71cbe9acdb ] Some Intel-based platforms rely on a topology file that hard-codes the use of MCLK0. This is incorrect in 10% of the cases. Rather than generating yet another set of topology files, this patch adds a kernel module parameter to override the topology value. In hindsight, we should never have allowed mclks to be specified in topology, this is a hardware-level information that should not have been visible in the topology. Future patches will try to set this value automagically, e.g. by parsing the NHLT content. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20220919115350.43104-3-pierre-louis.bossart@linux… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/hda.c | 11 +++++++++++ sound/soc/sof/ipc3-topology.c | 7 +++++++ sound/soc/sof/sof-priv.h | 4 ++++ 3 files changed, 22 insertions(+) diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index 17f2f3a982c3..7d9e62ab9d0e 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -376,6 +376,10 @@ static int dmic_num_override = -1; module_param_named(dmic_num, dmic_num_override, int, 0444); MODULE_PARM_DESC(dmic_num, "SOF HDA DMIC number"); +static int mclk_id_override = -1; +module_param_named(mclk_id, mclk_id_override, int, 0444); +MODULE_PARM_DESC(mclk_id, "SOF SSP mclk_id"); + #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) static bool hda_codec_use_common_hdmi = IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI); module_param_named(use_common_hdmi, hda_codec_use_common_hdmi, bool, 0444); @@ -1433,6 +1437,13 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev) sof_pdata->tplg_filename = tplg_filename; } + + /* check if mclk_id should be modified from topology defaults */ + if (mclk_id_override >= 0) { + dev_info(sdev->dev, "Overriding topology with MCLK %d from kernel_parameter\n", mclk_id_override); + sdev->mclk_id_override = true; + sdev->mclk_id_quirk = mclk_id_override; + } } /* diff --git a/sound/soc/sof/ipc3-topology.c b/sound/soc/sof/ipc3-topology.c index e97f50d5bcba..b8ec302bc887 100644 --- a/sound/soc/sof/ipc3-topology.c +++ b/sound/soc/sof/ipc3-topology.c @@ -1233,6 +1233,7 @@ static int sof_link_afe_load(struct snd_soc_component *scomp, struct snd_sof_dai static int sof_link_ssp_load(struct snd_soc_component *scomp, struct snd_sof_dai_link *slink, struct sof_ipc_dai_config *config, struct snd_sof_dai *dai) { + struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp); struct snd_soc_tplg_hw_config *hw_config = slink->hw_configs; struct sof_dai_private_data *private = dai->private; u32 size = sizeof(*config); @@ -1257,6 +1258,12 @@ static int sof_link_ssp_load(struct snd_soc_component *scomp, struct snd_sof_dai config[i].hdr.size = size; + if (sdev->mclk_id_override) { + dev_dbg(scomp->dev, "tplg: overriding topology mclk_id %d by quirk %d\n", + config[i].ssp.mclk_id, sdev->mclk_id_quirk); + config[i].ssp.mclk_id = sdev->mclk_id_quirk; + } + /* copy differentiating hw configs to ipc structs */ config[i].ssp.mclk_rate = le32_to_cpu(hw_config[i].mclk_rate); config[i].ssp.bclk_rate = le32_to_cpu(hw_config[i].bclk_rate); diff --git a/sound/soc/sof/sof-priv.h b/sound/soc/sof/sof-priv.h index f11f575fd1da..544e5be9d10e 100644 --- a/sound/soc/sof/sof-priv.h +++ b/sound/soc/sof/sof-priv.h @@ -585,6 +585,10 @@ struct snd_sof_dev { /* to protect the ipc_rx_handler_list and dsp_state_handler_list list */ struct mutex client_event_handler_mutex; + /* quirks to override topology values */ + bool mclk_id_override; + u16 mclk_id_quirk; /* same size as in IPC3 definitions */ + void *private; /* core does not touch this */ }; -- 2.35.1

1 0

[PATCH AUTOSEL 5.19 23/36] ASoC: SOF: pci: Change DMI match info to support all Chrome platforms
by Sasha Levin 10 Oct '22

10 Oct '22

From: Jairaj Arava <jairaj.arava(a)intel.com> [ Upstream commit c1c1fc8103f794a10c5c15e3c17879caf4f42c8f ] In some Chrome platforms if OEM's use their own string as SYS_VENDOR than "Google", it leads to firmware load failure from intel/sof/community path. Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used as common prefix and is supported in all Chrome platforms. Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Chao Song <chao.song(a)intel.com> Reviewed-by: Curtis Malainey <curtis(a)malainey.com> Signed-off-by: Jairaj Arava <jairaj.arava(a)intel.com> Signed-off-by: Curtis Malainey <cujomalainey(a)chromium.org> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20220919114429.42700-1-pierre-louis.bossart@linux… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/sof-pci-dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c index d627092b399d..643fd1036d60 100644 --- a/sound/soc/sof/sof-pci-dev.c +++ b/sound/soc/sof/sof-pci-dev.c @@ -138,7 +138,7 @@ static const struct dmi_system_id community_key_platforms[] = { .ident = "Google Chromebooks", .callback = chromebook_use_community_key, .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Google"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "Google"), } }, {}, -- 2.35.1

1 0