- Alsa-devel - mailman.alsa-project.org

Re: [alsa-devel] New Realtec ALC833 Codec in Fujitsu Siemens Xi2428
by Die Mumie 07 Dec '07

07 Dec '07

So, first: I have a -HDMI Connector -Jack for Headphones (HP) and SPDIF -Jack for Mic or Line -Two built in Mics * -Built in Speakers (I Guess that they are Stereo, but I'm not sure) * What I can test is: Headphones Internel Speakers Internal Microphone so I'm going trough the model list. 3stack-dig - Sound at HP, no IS, no Mic 6stack-dig - Front gives Sound at HP, Surround at IS, no Mic 3stack-6ch - Front gives Sound at HP, Surround at IS, no Mic 3stack-6ch-dig - Front gives Sound at HP, no IS, no Mic 6stack-dig-demo - Front gives sound at HP and IS at the same time, no switching by Jack, no Mic acer - Front gives Sound at HP, Surround at IS, no Mic acer-aspire - Switchs between HP and IS by plugging the HP, Headphones switch Enables/Disables sound on HP, no Mic medion - no Sound medion-md2 - sound on HP when HP switch is enabled, no mic targa-dig - sound on HP when HP switch is enabled, Surround gives on IS, no Mic targa-2ch-dig - sound on HP when HP switch is enabled, no mic laptop-eapd - Front on HP, Surround on IS, no mic lenovo-101e - Sound on Front Jack switching, no Mic lenovo-nb0763 - Sound on Speaker Jack switching, no Mic lenovo-ms7195-dig - Sound on Front same time at IS and HP, no Mic haier-w66 - Front on HP, no Mic 6stack-hp - Nothing 3stack-hp - Front on HP, Center on IS, no Mic I hope this helps Andy Shevchenko <andy(a)smile.org.ua> schrieb: Hi Die Mumie! On Wed, Dec 05, 2007 at 01:47:07AM +0100, Die Mumie wrote next: > Also, try one of the supported models for the ALC883: > 3stack-dig 3-jack with SPDIF I/O > 6stack-dig 6-jack digital with SPDIF I/O > 3stack-6ch 3-jack 6-channel > 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O > 6stack-dig-demo 6-jack digital for Intel demo board > acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) > acer-aspire Acer Aspire 9810 > medion Medion Laptops > medion-md2 Medion MD2 > targa-dig Targa/MSI > targa-2ch-dig Targs/MSI with 2-channel > laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE) > lenovo-101e Lenovo 101E > lenovo-nb0763 Lenovo NB0763 > lenovo-ms7195-dig Lenovo MS7195 > haier-w66 Haier W66 > 6stack-hp HP machines with 6stack (Nettle boards) > 3stack-hp HP machines with 3stack (Lucknow, Samba boards) > auto auto-config reading BIOS (default) Did you hear some sound in the HP or internel speakers with someone of these models? If yes, please, say what is wrong with that sound. -- With best regards, Andy Shevchenko. mailto: andy(a)smile.org.ua --------------------------------- Ihr erstes Fernweh? Wo gibt es den schönsten Strand.

2 1

[alsa-devel] Please help me with USB Audio drivers.
by kevin liu 07 Dec '07

07 Dec '07

Dear: I am using a tv card which has a standard usb audio interface, when I plug the card, snd-usb-audio finds my usb audio interface, And I use mplayer to test the effect, unluckly, I could not get and sound. And I give mplayer these parameters: """ mplayer alsa:adevice=hw.1 ,0:volume=100:immediatemode=0:amode=1:audiorate=48000:forc eaudio """ I am getting so frustrated by this problem. I don't know how to let USB Audio driver to drive my audio interface. Please help me.

2 1

[alsa-devel] Can I control volume of each virtual device?
by feng_tian 07 Dec '07

07 Dec '07

Hi, all: We are on a project using alsa. There are three applications will use the sound card, but we only have one physical card. My plan is to create virtual device for each application. How I'm gonna control the volume of each device, which interface to use? I want this feature because when one application need to be exclusive, it can mute the other virtual devices. Any comments or advices is welcome. Thanks BR Feng

2 1

[alsa-devel] Making ALSA apps run on OSS driver
by Pharaoh . 06 Dec '07

06 Dec '07

Hi For my OMAP 2430 board, I have a working OSS driver , but all my audio/video applications are written for ALSA, since we had all ALSA drivers for previous board. Now I want to use the OSS driver as it is for 1 week and run my applications using it, I know this is not the best thing to do but currently I dont have time to write ALSA driver from scratch. I have heard about OSS emulation in ALSA i.e. any read/write to /dev/dsp will go to my ALSA driver but is there any way to do the reverse i.e. apps using ALSA interface should somehow talk to OSS driver? What all changes I need to make and where? -Pharaoh.

2 2

Re: [alsa-devel] New Realtec ALC833 Codec in Fujitsu Siemens Xi2428
by Die Mumie 05 Dec '07

05 Dec '07

Ok, doing as you wish. There is no useable Documentation for this Notebook, because ist seems to work with "great Vista", all I could find is a Guide for installing the internal Microphone under Vista. I'll attach 3 files, -The Vista guide -The Alsa-Info output -The dmesg output Tobin Davis <tdavis(a)dsl-only.net> schrieb: The helps immensely, thanks. For some reason, pastebin seems to be having issues. Could you email me directly the alsa-info.txt file that the alsa-info.sh script generated? It should be in your /tmp directory. Also, if you have a user's manual in pdf form for your system, please attach it as well (english version). This may gleen some info about the specs of your system that may have been overlooked, especially the mic. The last bit I'd like you to do, if you are up for it, is to rebuild the drivers with debugging turned on. To do this, download alsa-driver-1.0.15.tar.bz2 and extract it. Then, in the directory it extracted to, type "./configure --with-debug=detect --with-cards=hda-intel && make && make install". When you load this driver, set model=auto. This will dump the bios configuration for the card (if any) into dmesg. I need that output as well. I'll try to work on this this week, but no guarantees. We had some serious flooding this last weekend, and I'm busy fixing my house. Based on the info below, I'll need to create a separate model for your system. It may take a few patches, but it will happen. Tobin On Wed, 2007-12-05 at 12:26 +0100, Die Mumie wrote: So, first: I have a -HDMI Connector -Jack for Headphones (HP) and SPDIF -Jack for Mic or Line -Two built in Mics * -Built in Speakers (I Guess that they are Stereo, but I'm not sure) * What I can test is: Headphones Internel Speakers Internal Microphone so I'm going trough the model list. 3stack-dig - Sound at HP, no IS, no Mic 6stack-dig - Front gives Sound at HP, Surround at IS, no Mic 3stack-6ch - Front gives Sound at HP, Surround at IS, no Mic 3stack-6ch-dig - Front gives Sound at HP, no IS, no Mic 6stack-dig-demo - Front gives sound at HP and IS at the same time, no switching by Jack, no Mic acer - Front gives Sound at HP, Surround at IS, no Mic acer-aspire - Switchs between HP and IS by plugging the HP, Headphones switch Enables/Disables sound on HP, no Mic medion - no Sound medion-md2 - sound on HP when HP switch is enabled, no mic targa-dig - sound on HP when HP switch is enabled, Surround gives on IS, no Mic targa-2ch-dig - sound on HP when HP switch is enabled, no mic laptop-eapd - Front on HP, Surround on IS, no mic lenovo-101e - Sound on Front Jack switching, no Mic lenovo-nb0763 - Sound on Speaker Jack switching, no Mic lenovo-ms7195-dig - Sound on Front same time at IS and HP, no Mic haier-w66 - Front on HP, no Mic 6stack-hp - Nothing 3stack-hp - Front on HP, Center on IS, no Mic I hope this helps Andy Shevchenko <andy(a)smile.org.ua> schrieb: Hi Die Mumie! On Wed, Dec 05, 2007 at 01:47:07AM +0100, Die Mumie wrote next: > Also, try one of the supported models for the ALC883: > 3stack-dig 3-jack with SPDIF I/O > 6stack-dig 6-jack digital with SPDIF I/O > 3stack-6ch 3-jack 6-channel > 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O > 6stack-dig-demo 6-jack digital for Intel demo board > acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) > acer-aspire Acer Aspire 9810 > medion Medion Laptops > medion-md2 Medion MD2 > targa-dig Targa/MSI > targa-2ch-dig Targs/MSI with 2-channel > laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE) > lenovo-101e Lenovo 101E > lenovo-nb0763 Lenovo NB0763 > lenovo-ms7195-dig Lenovo MS7195 > haier-w66 Haier W66 > 6stack-hp HP machines with 6stack (Nettle boards) > 3stack-hp HP machines with 3stack (Lucknow, Samba boards) > auto auto-config reading BIOS (default) Did you hear some sound in the HP or internel speakers with someone of these models? If yes, please, say what is wrong with that sound. -- Tobin Davis There are two types of people in this world, good and bad. The good sleep better, but the bad seem to enjoy the waking hours much more. -- Woody Allen --------------------------------- Jetzt Mails schnell in einem Vorschaufenster überfliegen. Dies und viel mehr bietet das neue Yahoo! Mail. name=root&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content= !!################################ !!ALSA Information Script v 0.4.34 !!################################ !!Script ran on: Wed Dec 5 01:29:45 CET 2007 !!Linux Distribution !!------------------ Gentoo Base System release 1.12.9 !!Kernel Information !!------------------ Kernel release: 2.6.22-gentoo-r9 Operating System: GNU/Linux Architecture: i686 Processor: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.15 Library version: 1.0.14a Utilities version: 1.0.14 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf0600000 irq 23 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:284b (rev 03) Subsystem: 1734:1107 -- Region 0: Memory at f0402000 (64-bit, non-prefetchable) [size=128] Region 2: Memory at f0400000 (64-bit, non-prefetchable) [size=8K] !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel enable : N id : <NULL> index : -1 model : <NULL> position_fix : 0 power_save : 0 power_save_controller : Y probe_mask : -1 single_cmd : N !!HDA-Intel Codec information !!--------------------------- Codec: Motorola Si3054 Address: 0 Vendor Id: 0x10573055 Subsystem Id: 0x10573055 Revision Id: 0x100700 Modem Function Group: 0x1 Codec: Realtek ALC883 Address: 1 Vendor Id: 0x10ec0883 Subsystem Id: 0x17341236 Revision Id: 0x100002 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A Node 0x02 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x05 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital PCM: rates [0x560]: 44100 48000 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital PCM: rates [0x560]: 44100 48000 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x1f 0x1f] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x12 0x12] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x05 0x0b Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Detect Pin Default 0x0121441f: [Jack] HP Out at Ext Rear Conn = 1/8, Color = Green EAPD: 0x0 Pin-ctls: 0xc0: OUT HP Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Detect Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Unknown EAPD: 0x0 Pin-ctls: 0x40: OUT Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083e: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black EAPD: 0x0 Pin-ctls: 0x20: IN Connection: 5 0x0c 0x0d 0x0e* 0x0f 0x26 Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083e: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black EAPD: 0x0 Pin-ctls: 0x20: IN Connection: 5 0x0c 0x0d 0x0e 0x0f* 0x26 Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x01a19830: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink EAPD: 0x0 Pin-ctls: 0x24: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x99a3093f: [Fixed] Mic at Int ATAPI Conn = ATAPI, Color = Unknown EAPD: 0x0 Pin-ctls: 0x24: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black EAPD: 0x0 Pin-ctls: 0x20: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black EAPD: 0x0 Pin-ctls: 0x20: IN Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black EAPD: 0x0 Pin-ctls: 0x00: Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x598301f0: [N/A] Line In at Int ATAPI Conn = ATAPI, Color = Unknown EAPD: 0x0 Pin-ctls: 0x00: Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x0810: OUT Pin Default 0x99430120: [Fixed] SPDIF Out at Int ATAPI Conn = ATAPI, Color = Unknown EAPD: 0x0 Pin-ctls: 0x00: Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black EAPD: 0x0 Pin-ctls: 0x00: Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x11: Stereo PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x25 0x0b !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 0 Dec 4 21:29 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 4 Dec 4 21:29 /dev/snd/hwC0D0 crw-rw---- 1 root audio 116, 5 Dec 4 21:29 /dev/snd/hwC0D1 crw-rw---- 1 root audio 116, 24 Dec 4 21:29 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 16 Dec 4 21:29 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 17 Dec 4 21:29 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 26 Dec 4 21:29 /dev/snd/pcmC0D2c crw-rw---- 1 root audio 116, 30 Dec 4 21:29 /dev/snd/pcmC0D6c crw-rw---- 1 root audio 116, 22 Dec 4 21:29 /dev/snd/pcmC0D6p crw-rw---- 1 root audio 116, 1 Dec 4 20:29 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Dec 4 21:29 /dev/snd/timer !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 card 0: Intel [HDA Intel], device 2: ALC883 Analog [ALC883 Analog] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Front',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 18 [58%] [-19.50dB] [on] Front Right: Playback 18 [58%] [-19.50dB] [on] Simple mixer control 'Front Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [on] Front Right: Playback 0 [0%] [-34.50dB] [on] Simple mixer control 'Front Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] Front Right: 0 [0%] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [on] Front Right: Playback 0 [0%] [-34.50dB] [on] Simple mixer control 'Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] Front Right: 0 [0%] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 0 [0%] [-12.00dB] [on] Front Right: Capture 0 [0%] [-12.00dB] [on] Simple mixer control 'Capture',1 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 0 [0%] [-12.00dB] [on] Front Right: Capture 0 [0%] [-12.00dB] [on] Simple mixer control 'Caller ID',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Digital',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 120 Front Left: Capture 60 [50%] [0.00dB] Front Right: Capture 60 [50%] [0.00dB] Simple mixer control 'Input Source',0 Capabilities: enum Items: 'Mic' 'Front Mic' Item0: 'Mic' Simple mixer control 'Input Source',1 Capabilities: enum Items: 'Mic' 'Front Mic' Item0: 'Mic' Simple mixer control 'Off-hook',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] !!All Loaded Modules !!------------------ Module ipv6 bridge llc snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device iwl4965 snd_hda_intel snd_pcm snd_timer snd_page_alloc snd_hwdep snd nvidia ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ALSA /var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/pci/hda/hda_codec.c:2792: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) ALSA /var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/pci/hda/hda_codec.c:2796: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA /var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/pci/hda/hda_codec.c:2800: hp_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA /var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/pci/hda/hda_codec.c:2808: inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0

1 0

[alsa-devel] Mindprint DI-MOD USB
by Christian Schumann 05 Dec '07

05 Dec '07

Hi, in janoary, I wrote to this list about an extension of the usb-audio driver for the Mindprint DI-MOD USB, but neither hat the necessary information at hand, no became a reply. In the meantime I did some research and here's what I found out: The DI-MOD USB is pretty usb-audio class compliant with the exception of the spdif output, which has to be activated manaually. I did this with the windows driver, but it would be nice to be able to do that with ALSA. I have a Envoice MkII with the DI-MOD USB, and my suggestion would be to automatically enable the spdif output when initializing the driver. The spdif output does not have any other effect on the card functionality. This could for example be included into the setup quirks for usb interfaces. The info I got from Markus Medau at usb-audio.com is the following: Digital: Vendorrequest, Typ: Out/Vendorinterface, bReq setCur, wVal 0x00, wIndex 0x04, data length 1: data 0x01 Analog: Vendorrequest, Typ: Out/Vendorinterface, bReq setCur, wVal 0x00, wIndex 0x02, data length 1: data 0x00 I don't have experience in writing drivers, but if someone can give me a clue where to start, I could give it a try. Regards Christian -- ------------------------------------------------------------------------ Dipl.-Phys. Christian Schumann |Technische Universitaet Kaiserslautern Mail: schumann(a)physik.uni-kl.de | Fachbereich Physik Tel.: 0631/205-4842 (Office) | http://www.physik.uni-kl.de Tel.: 0631/205-4843 (Lab) | Fax.: 0631/205-3902 | Post: Erwin-Schroedinger-Strasse, D-67663 Kaiserslautern -------------------------------------------------------------------------

2 2

[alsa-devel] imedabid@yahoo.fr
by abid imed 05 Dec '07

05 Dec '07

imedabid(a)yahoo.fr _____________________________________________________________________________ Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail

1 0

[alsa-devel] Alsa problems: can't use dmix
by feng_tian 05 Dec '07

05 Dec '07

Hi, all: I have a problem with dmix of alsa. I'm using alsa v1.0.11rc2 now. And make it running on ATMEL AT91SAM9260EK board. It runs ok without Dmix. But when I tried: bash> aplay -D dmixer test.wav The errors are: ALSA lib pcm_direct.c:790:(snd_pcm_direct_initialize_slave) slave plugin does not support mmap interleaved or mmap noninterleaved access ALSA lib pcm_dmix.c:864:(snd_pcm_dmix_open) unable to initialize slave aplay: main:547: audio open error: Invalid argument The configuration of my alsa in /etc/asound.con is: pcm.card0 { type hw card 0 } pcm.!default { type plug slave.pcm "dmixer" } pcm.dmixer { type dmix ipc_key 1024 slave { pcm "hw:0,0" format S16_LE period_time 0 period_size 1024 buffer_size 4096 rate 22050 } bindings { 0 0 1 1 } } ctl.dmixer { type hw card 0 device 0 } pcm.dsp { type plug slave.pcm "dmixer" #use our new PCM here } ctl.mixer{ type hw card 0 } bash> aplay -L gives: PCM list: hw { @args.0 CARD @args.1 DEV @args.2 SUBDEV @args.CARD { type string default { @func getenv vars { 0 ALSA_PCM_CARD 1 ALSA_CARD } default { @func refer name 'defaults.pcm.card' } } } @args.DEV { type integer default { @func igetenv vars { 0 ALSA_PCM_DEVICE } default { @func refer name 'defaults.pcm.device' } } } @args.SUBDEV { type integer default { @func refer name 'defaults.pcm.subdevice' } } type hw card $CARD device $DEV subdevice $SUBDEV } plughw { @args.0 CARD @args.1 DEV @args.2 SUBDEV @args.CARD { type string default { @func getenv vars { 0 ALSA_PCM_CARD 1 ALSA_CARD } default { @func refer name 'defaults.pcm.card' } } } @args.DEV { type integer default { @func igetenv vars { 0 ALSA_PCM_DEVICE } default { @func refer name 'defaults.pcm.device' } } } @args.SUBDEV { type integer default { @func refer name 'defaults.pcm.subdevice' } } type plug slave.pcm { type hw card $CARD device $DEV subdevice $SUBDEV } } plug { @args.0 SLAVE @args.SLAVE { type string } type plug slave.pcm $SLAVE } shm { @args.0 SOCKET @args.1 PCM @args.SOCKET { type string } @args.PCM { type string } type shm server $SOCKET pcm $PCM } tee { @args.0 SLAVE @args.1 FILE @args.2 FORMAT @args.SLAVE { type string } @args.FILE { type string } @args.FORMAT { type string default raw } type file slave.pcm $SLAVE file $FILE format $FORMAT } file { @args.0 FILE @args.1 FORMAT @args.FILE { type string } @args.FORMAT { type string default raw } type file slave.pcm null file $FILE format $FORMAT } null { type null } cards 'cards.pcm' front 'cards.pcm.front' rear 'cards.pcm.rear' center_lfe 'cards.pcm.center_lfe' side 'cards.pcm.side' surround40 'cards.pcm.surround40' surround41 'cards.pcm.surround41' surround50 'cards.pcm.surround50' surround51 'cards.pcm.surround51' surround71 'cards.pcm.surround71' iec958 'cards.pcm.iec958' spdif 'cards.pcm.iec958' modem 'cards.pcm.modem' phoneline 'cards.pcm.phoneline' dmix 'cards.pcm.dmix' dsnoop 'cards.pcm.dsnoop' card0 { type hw card 0 } default { type plug slave.pcm dmixer } dmixer { type dmix ipc_key 1024 slave { pcm 'hw:0,0' format S16_LE period_time 0 period_size 1024 buffer_size 4096 rate 22050 } bindings { 0 0 1 1 } } dsp { type plug slave.pcm dmixer } Any helps or advices is wecome. BR Feng

1 0

[alsa-devel] New Realtec ALC833 Codec in Fujitsu Siemens Xi2428
by Die Mumie 05 Dec '07

05 Dec '07

Hi, I've been told to post here, so I do. I have a Notebook with a Intel hda sound device, the /proc/asound/card0/codec#1 returns Realtec ALC833 but there is no model provided by the alsa driver that runs this Soundcard properly. Am I wrong here? If yes, then I'm sorry. --------------------------------- Heute schon einen Blick in die Zukunft von E-Mails wagen? Versuchen Sie´s mit dem neuen Yahoo! Mail.

2 2

[alsa-devel] POSIX clocks and ALSA
by Heikki Lindholm 04 Dec '07

04 Dec '07

Hello, Some years ago there was some talk about UST support in Linux, but the support never happened. With the hrtimers patch (and I'm not quite sure if even earlier?) CLOCK_MONOTONIC would seem like a fairly good UST time source. What I'd like to see, is a selectable clock for ALSA timestamping, e.g. something like snd_sw_params_clock(..., clockid_t clk). Would this seem plausible? I don't know that much about ALSA internals, so, no idea whether different clocks on different pcms/whatever would quickly turn into an unmanageable mess. -- Heikki Lindholm

3 15