- Alsa-devel - mailman.alsa-project.org

[alsa-devel] Asus w5f. ALC660-VD codec not detected
by Nigel Henry 07 Jan '09

07 Jan '09

The person I've been trying to help has fedora Core 7 on this Asus w5f laptop. FC7 has sounds. there are 2 codecs detected, one for the soundcard, and one for the sounds on the onboard modem. Link below for output from alsa-info.sh, and a bit of pasted output. http://www.alsa-project.org/db/?f=93964b2ec68d1f912509bb1ac2ee02a5163ec4a1 !!################################ !!ALSA Information Script v 0.4.52 !!################################ !!Script ran on: Fri Dec 12 11:07:58 CET 2008 !!Linux Distribution !!------------------ Fedora release 7 (Moonshine) Fedora release 7 (Moonshine) Fedora release 7 (Moonshine) !!Kernel Information !!------------------ Kernel release: 2.6.23.17-88.fc7 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.14 Library version: 1.0.14a Utilities version: 1.0.14 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfeb38000 irq 16 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:27d8 (rev 02) Subsystem: 1043:1262 !!Modprobe options (Sound related) !!-------------------------------- snd-card-0: index=0 snd-hda-intel: index=0 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel enable : N id : <NULL> index : 0 model : <NULL> position_fix : 0 probe_mask : -1 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Realtek ALC660-VD Address: 0 Vendor Id: 0x10ec0660 Subsystem Id: 0x10430000 Revision Id: 0x100001 No Modem Function Group found <skip> Codec: Motorola Si3054 Address: 1 Vendor Id: 0x10573055 Subsystem Id: 0x10431316 Revision Id: 0x100700 Modem Function Group: 0x1 Moving on to his other install. He also has Fedora 10 installed on this machine, but the only codec detected is the modem one (Motorola Si3054), and no sounds. Link below for alsa-info.sh output, and output pasted also below. http://www.alsa-project.org/db/?f=552b7c6386f59813a04150545ab79f92d4af2e8a !!################################ !!ALSA Information Script v 0.4.52 !!################################ !!Script ran on: Fri Dec 12 11:16:40 CET 2008 !!Linux Distribution !!------------------ Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) !!Kernel Information !!------------------ Kernel release: 2.6.27.5-117.fc10.i686 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.17 Library version: Utilities version: 1.0.18rc3 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfeb38000 irq 16 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:27d8 (rev 02) Subsystem: 1043:1262 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL> index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL> position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Motorola Si3054 Address: 1 Vendor Id: 0x10573055 Subsystem Id: 0x10431316 Revision Id: 0x100700 Modem Function Group: 0x1 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root root 116, 7 2008-12-12 11:13 /dev/snd/controlC0 crw-rw---- 1 root root 116, 6 2008-12-12 11:13 /dev/snd/hwC0D1 crw-rw---- 1 root root 116, 5 2008-12-12 11:13 /dev/snd/pcmC0D6c crw-rw---- 1 root root 116, 4 2008-12-12 11:13 /dev/snd/pcmC0D6p crw-rw---- 1 root root 116, 3 2008-12-12 11:13 /dev/snd/seq crw-rw---- 1 root root 116, 2 2008-12-12 11:13 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # @hooks [ { func load files [ "/etc/alsa/pulse-default.conf" ] errors false } ] !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Card hw:0 'Intel'/'HDA Intel at 0xfeb38000 irq 16' Mixer name : 'Motorola Si3054' Components : 'HDA:10573055' Controls : 2 Simple ctrls : 2 Simple mixer control 'Caller ID',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Off-hook',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] !!Alsactl output !!------------- --startcollapse-- state.Intel { control.1 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Off-hook Switch' value false } control.2 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Caller ID Switch' value false } } --endcollapse-- !!All Loaded Modules !!------------------ Module fuse i915 drm i2c_core rfcomm sco bridge stp bnep l2cap sunrpc ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand acpi_cpufreq dm_multipath uinput snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep btusb snd bluetooth firewire_ohci 8139cp firewire_core arc4 ecb crypto_blkcipher crc_itu_t sdhci_pci sdhci mmc_core 8139too gspca_vc032x soundcore iwl3945 mii rfkill iTCO_wdt iTCO_vendor_support gspca_main videodev v4l1_compat usb_storage serio_raw mac80211 cfg80211 joydev video output asus_laptop pcspkr ata_generic pata_acpi I also suggested upgrading to the latest snapshot of the alsa driver, which he did, but no change, and only the modem codec is detected on his Fedora 10 install Any suggestions are really welcome to help this guy Nigel.

2 2

[alsa-devel] What exactly is module snd-hdsnd-hda-intel
by Nigel Henry 07 Jan '09

07 Jan '09

I see someone that had sounds working on a Thinkpad T61, but sounds have recently stopped working. The module snd-hdsnd-hda-intel is listed on his lsmod output as below. I've never seen such a module before. Any info on what this module is? lsmod | grep snd_hda_intel returns: snd_hdsnd_hda_intel 324248 2 snd_pcm 62596 2 snd_pcm_oss,snd_hda_intel snd 45604 12 snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_seq_oss,snd_seq,snd_timer,snd_seq_device snd_page_alloc 7816 2 snd_hda_intel,snd_pcm a_intel 324248 2 snd_pcm 62596 2 snd_pcm_oss,snd_hda_intel snd 45604 12 snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_seq_oss,snd_seq,snd_timer,snd_seq_device snd_page_alloc 7816 2 snd_hda_intel,snd_pcm This is on a Debian Lenny install, using kernel 2.6.26-1-686, and alsa driver version 1.0.16. Codec is AD1984. His soundcard is detected ok, as below. $ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfe020000 irq 17 This is only out of academic interest, but as modinfo shows no such module, I'm really puzzled how a non existing module can be loaded. Nigel.

2 2

[alsa-devel] alsa-lib-1.0.18 doesn't build with option '--with-softfloat'
by Cliff Cai 07 Jan '09

07 Jan '09

Hi all, I'm trying to build the latest release alsa-lib-1.0.18 on Blackfin with option '--with-softfloat', but it failed with message: libtool: install: warning: remember to run `libtool --finish /usr/lib/alsa-lib/smixer' ../src/.libs/libasound.so: undefined reference to `_sqrtf' ../src/.libs/libasound.so: undefined reference to `_exp' ../src/.libs/libasound.so: undefined reference to `_log' ../src/.libs/libasound.so: undefined reference to `_sqrt' ../src/.libs/libasound.so: undefined reference to `_fmod' ../src/.libs/libasound.so: undefined reference to `_floor' Since I've selected --with-softfloat, '-lm' should be excluded from ALSA_DEPLIBS. but some source files still depend on libm, such as .../pcm/pcm_ladspa.c;.../mixer/ simple_none.c .../alisp/alisp.c.These there files cause undefined reference as above. Best Regards Cliff

3 5

[alsa-devel] [patch] nvidia hdmi audio disabled with xorg "useEdid" option
by Brian Hinz 07 Jan '09

07 Jan '09

Hi, Attached is a patch to add the IDs necessary to enable the hdmi out on an Asus P5N-EM HDMI motherboard. On a related note though, I'm trying to get this board set up as a mythtv and having some troubles getting both audio & video to work properly with my Soyo 32" LCD TV. This is probably better directed to the nvidia forums, but since I'm submitting a patch anyway I figured I'll put the question out there just in case someone knows... The issue I'm having is that the LCD TV has a huge amount of overscan in all modes, unless I direct the nVidia xorg driver to ignore the EDID, in which case the resolution is perfect but then the audio is disabled! Obviously the EDID provides the TV's audio capabilities to the X driver, and so it stands to reason that in discarding this information the audio might not work, but is there any reason to think that this could be corrected in the alsa driver somehow or does the problem lie entirely in the nvidia binary X driver? Any thoughts/suggestions would be appreciated! Thanks, -brian

2 1

[alsa-devel] [PATCH] alsa-info.sh - added extra checks - FIXED
by Travis Place 07 Jan '09

07 Jan '09

> Since this patch hasnt been applied yet, i made a few small edits to > it, so ill resubmit now.. > > Same Changelog stands.. > > > > > > On 29/12/2008, at 2:25 AM, Travis Place wrote: > >> Changelog: >> >> Added checks for Pulseaudio/Esound/aRts 'sound servers', Check if >> they are 1) installed 2) running >> A few small changes for the locale, and timezone - keep things more >> uniform. >> Bumped version to 0.4.53 >> >> Signed-off-by: Travis Place <wishie(a)wishie.net> >> >> >> <alsa-info-0.4.53.patch> >> >> >> >> _______________________________________________ >> Alsa-devel mailing list >> Alsa-devel(a)alsa-project.org >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel >

2 1

[alsa-devel] Fixing the AICA driver
by Adrian McMenamin 07 Jan '09

07 Jan '09

It's about a year since I last mentioned this so I thought I'd give it another go... But the AICA sound driver I wrote for the Dreamcast still won't work properly with a pure ALSA setup and I don't know why. It works when OSS emulation is on so it appears to be some sort of interaction with the ALSA lib layer. The snd-summy driver also appears to work well with a 'pure' ALSA setup, but when (for instance) I try to replay an MP3 track without OSS emulation on I get this: Playing MPEG stream from ms.mp3 ... MPEG 1.0, Layer: III, Freq: 44100, mode: Joint-Stereo, modext: 2, BPF : 2560 Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0. Bitrate: 128 Kbits/s, Extension value: 2 Audio: 1:1 conversion, rate: 44100, encoding: signed 16 bit, channels: 2 ALSA lib pcm_plug.c:773:(snd_pcm_plug_hw_refine_schange) Unable to find an usable access for 'default' ALSA snd_pcm_hw_params_set_access error: Invalid argument Can't find a suitable libao driver. (Is device in use?) Any clues anyone? Best wishes for 2009 and thanks for all help, Adrian

2 1

[alsa-devel] [PATCH] Typo kills AD1882 mixers
by Clemens Fruhwirth 07 Jan '09

07 Jan '09

Typo bug. --- linux-2.6.28-gentoo/sound/pci/hda/patch_analog.c 2009-01-04 10:58:53.000000000 +0100 +++ linux-2.6.28-gentoo.new/sound/pci/hda/patch_analog.c 2009-01-03 21:31:14.000000000 +0100 @@ -4264,13 +4264,13 @@ spec->num_adc_nids = ARRAY_SIZE(ad1882_adc_nids); spec->adc_nids = ad1882_adc_nids; spec->capsrc_nids = ad1882_capsrc_nids; - if (codec->vendor_id == 0x11d1882) + if (codec->vendor_id == 0x11d41882) spec->input_mux = &ad1882_capture_source; else spec->input_mux = &ad1882a_capture_source; spec->num_mixers = 2; spec->mixers[0] = ad1882_base_mixers; - if (codec->vendor_id == 0x11d1882) + if (codec->vendor_id == 0x11d41882) spec->mixers[1] = ad1882_loopback_mixers; else spec->mixers[1] = ad1882a_loopback_mixers; -- Fruhwirth Clemens http://clemens.endorphin.org

2 1

[alsa-devel] [PATCH] pcm_ladspa: add support for softfloat
by Mike Frysinger 07 Jan '09

07 Jan '09

The ladspa module uses math functions unconditionally which breaks when building with --with-softfloat. Tweak the code to only call the math functions when HAVE_SOFT_FLOAT is not defined. Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- src/pcm/pcm_ladspa.c | 23 ++++++++++++++--------- 1 files changed, 14 insertions(+), 9 deletions(-) diff --git a/src/pcm/pcm_ladspa.c b/src/pcm/pcm_ladspa.c index 5161820..0e9321c 100644 --- a/src/pcm/pcm_ladspa.c +++ b/src/pcm/pcm_ladspa.c @@ -34,7 +34,9 @@ #include <dirent.h> #include <locale.h> +#ifndef HAVE_SOFT_FLOAT #include <math.h> +#endif #include "pcm_local.h" #include "pcm_plugin.h" @@ -511,36 +513,39 @@ static void snd_pcm_ladspa_get_default_cvalue(const LADSPA_Descriptor * desc, un *val = desc->PortRangeHints[port].LowerBound; break; case LADSPA_HINT_DEFAULT_LOW: - if (LADSPA_IS_HINT_LOGARITHMIC(hdesc)) { +#ifndef HAVE_SOFT_FLOAT + if (LADSPA_IS_HINT_LOGARITHMIC(hdesc)) *val = exp(log(desc->PortRangeHints[port].LowerBound) * 0.75 + log(desc->PortRangeHints[port].UpperBound) * 0.25); - } else { + else +#endif *val = (desc->PortRangeHints[port].LowerBound * 0.75) + (desc->PortRangeHints[port].UpperBound * 0.25); - } break; case LADSPA_HINT_DEFAULT_MIDDLE: - if (LADSPA_IS_HINT_LOGARITHMIC(hdesc)) { +#ifndef HAVE_SOFT_FLOAT + if (LADSPA_IS_HINT_LOGARITHMIC(hdesc)) *val = sqrt(desc->PortRangeHints[port].LowerBound * desc->PortRangeHints[port].UpperBound); - } else { + else +#endif *val = 0.5 * (desc->PortRangeHints[port].LowerBound + desc->PortRangeHints[port].UpperBound); - } break; case LADSPA_HINT_DEFAULT_HIGH: - if (LADSPA_IS_HINT_LOGARITHMIC(hdesc)) { +#ifndef HAVE_SOFT_FLOAT + if (LADSPA_IS_HINT_LOGARITHMIC(hdesc)) *val = exp(log(desc->PortRangeHints[port].LowerBound) * 0.25 + log(desc->PortRangeHints[port].UpperBound) * 0.75); - } else { + else +#endif *val = (desc->PortRangeHints[port].LowerBound * 0.25) + (desc->PortRangeHints[port].UpperBound * 0.75); - } break; case LADSPA_HINT_DEFAULT_MAXIMUM: *val = desc->PortRangeHints[port].UpperBound; -- 1.6.0.6

2 2

[alsa-devel] alsa-info security/privacy concerns
by Wu Fengguang 07 Jan '09

07 Jan '09

Greetings, The auto-uploading behavior of http://www.alsa-project.org/alsa-info.sh makes it act like a spyware. This makes some users - including me in the first try - astonishing and uncomfortable. I'd like to fix it by 1) adding user prompt 2) defaulting to --no-upload and introduce --upload Before going for the code, I'd like to ask for your opinions, especially on (2). Thank you. Fengguang

3 4

[alsa-devel] [PATCH] Add config files for more Analog Devices codecs
by Mike Frysinger 07 Jan '09

07 Jan '09

From: Cliff Cai <cliff.cai(a)analog.com> Signed-off-by: Cliff Cai <cliff.cai(a)analog.com> Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- src/conf/cards/AD1836.conf | 17 +++++++++++++++++ src/conf/cards/AD1980.conf | 42 ++++++++++++++++++++++++++++++++++++++++++ src/conf/cards/AD73311.conf | 14 ++++++++++++++ src/conf/cards/AD73322.conf | 17 +++++++++++++++++ src/conf/cards/Makefile.am | 5 +++++ src/conf/cards/SSM2602.conf | 12 ++++++++++++ 6 files changed, 107 insertions(+), 0 deletions(-) create mode 100644 src/conf/cards/AD1836.conf create mode 100644 src/conf/cards/AD1980.conf create mode 100644 src/conf/cards/AD73311.conf create mode 100644 src/conf/cards/AD73322.conf create mode 100644 src/conf/cards/SSM2602.conf diff --git a/src/conf/cards/AD1836.conf b/src/conf/cards/AD1836.conf new file mode 100644 index 0000000..0317ec5 --- /dev/null +++ b/src/conf/cards/AD1836.conf @@ -0,0 +1,17 @@ +AD1836.pcm.default { + type plug + slave { + pcm { + type mmap_emul + slave { + pcm { + type hw + card 0 + format S32_LE + rate 48000 + sync_ptr_ioctl 1 + } + } + } + } +} diff --git a/src/conf/cards/AD1980.conf b/src/conf/cards/AD1980.conf new file mode 100644 index 0000000..bd0e519 --- /dev/null +++ b/src/conf/cards/AD1980.conf @@ -0,0 +1,42 @@ +<confdir:pcm/front.conf> + +AD1980.pcm.front.0 { + @args [ CARD ] + @args.CARD { + type string + } + type hw + card $CARD + device 0 +} + +AD1980.pcm.default { + @args [ CARD ] + @args.CARD { + type string + } + type asym + playback.pcm { + type plug + slave.pcm { + @func concat + strings [ "dmix:CARD=" $CARD ] + } + } + capture.pcm { + type plug + slave.pcm { + @func concat + strings [ "dsnoop:CARD=" $CARD ] + } + } +} + +<confdir:pcm/surround40.conf> +<confdir:pcm/surround41.conf> +<confdir:pcm/surround50.conf> +<confdir:pcm/surround51.conf> + +AD1980.pcm.surround40.0 cards.AD1980.pcm.front.0 +AD1980.pcm.surround51.0 cards.AD1980.pcm.front.0 + diff --git a/src/conf/cards/AD73311.conf b/src/conf/cards/AD73311.conf new file mode 100644 index 0000000..e271e9c --- /dev/null +++ b/src/conf/cards/AD73311.conf @@ -0,0 +1,14 @@ +AD73311.pcm.default { + type plug + slave { + pcm { + type hw + card 0 + format S16_LE + rate 8000 + channels 1 + } + + + } +} diff --git a/src/conf/cards/AD73322.conf b/src/conf/cards/AD73322.conf new file mode 100644 index 0000000..e6cbc29 --- /dev/null +++ b/src/conf/cards/AD73322.conf @@ -0,0 +1,17 @@ +AD73322.pcm.default { + type plug + slave { + pcm { + type mmap_emul + slave { + pcm { + type hw + card 0 + format S16_LE + rate 8000 + channels 1 + } + } + } + } +} diff --git a/src/conf/cards/Makefile.am b/src/conf/cards/Makefile.am index f4d6c17..f2d34c7 100644 --- a/src/conf/cards/Makefile.am +++ b/src/conf/cards/Makefile.am @@ -2,6 +2,10 @@ alsaconfigdir = @ALSA_CONFIG_DIR@ alsadir = $(alsaconfigdir)/cards cfg_files = aliases.conf \ AACI.conf \ + AD1836.conf \ + AD1980.conf \ + AD73311.conf \ + AD73322.conf \ ATIIXP.conf \ ATIIXP-SPDMA.conf \ ATIIXP-MODEM.conf \ @@ -41,6 +45,7 @@ cfg_files = aliases.conf \ RME9636.conf \ RME9652.conf \ SI7018.conf \ + SSM2602.conf \ TRID4DWAVENX.conf \ USB-Audio.conf \ YMF744.conf \ diff --git a/src/conf/cards/SSM2602.conf b/src/conf/cards/SSM2602.conf new file mode 100644 index 0000000..a6fbffe --- /dev/null +++ b/src/conf/cards/SSM2602.conf @@ -0,0 +1,12 @@ +SSM2602.pcm.default { + type plug + slave { + pcm { + type hw + card 0 + format S32_LE + rate 48000 + channels 2 + } + } +} -- 1.6.0.6

1 0