- Alsa-devel - mailman.alsa-project.org

[alsa-devel] snd-hda-intel option for Toshiba A200-1MB
by Vivia Nikolaidou 02 Feb '09

02 Feb '09

Dear ALSA developers, I recently installed linux on a Toshiba Satellite A200-1MB laptop. Its sound card is ALC861VD, using the hda_intel module. The problem was that the earphone jack sense wasn't working. It turns out that I had to use the Lenovo option. It would be nice if you could add this model (and probably other A200 models as well) to ALSA-Configuration.txt . Thank you, Vivia Nikolaidou

2 1

[alsa-devel] ASoC updates for 2.6.30
by Mark Brown 02 Feb '09

02 Feb '09

The following changes since commit 7393958f630ac91e591e62058f2bdb61523ec60c: Peter Ujfalusi (1): ASoC: TWL4030: Add analog loopback support are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.30 Eero Nurkkala (1): OMAP: ASoC: Fix spinlock misuse in omap-pcm.c Grazvydas Ignotas (1): ASoC: Update OMAP3 pandora board file Mark Brown (1): Merge branch 'for-2.6.29' into for-2.6.30 Timur Tabi (2): ASoC: fix initialization order of the CS4270 codec driver ASoC: fix documentation in CS4270 codec driver sound/soc/codecs/cs4270.c | 332 ++++++++++++++++++++++++----------------- sound/soc/omap/omap-pcm.c | 5 +- sound/soc/omap/omap3pandora.c | 49 ++++--- 3 files changed, 230 insertions(+), 156 deletions(-)

2 1

[alsa-devel] ASoC update for 2.6.29
by Mark Brown 02 Feb '09

02 Feb '09

The following changes since commit ef390c0b6e3f4d2d2d43f53f4bd35e1884571a14: Misael Lopez Cruz (1): ASoC: OMAP: Initialize XCCR and RCCR registers in McBSP DAI driver are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.29 Eero Nurkkala (1): OMAP: ASoC: Fix spinlock misuse in omap-pcm.c sound/soc/omap/omap-pcm.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)

2 1

[alsa-devel] [PATCH] msnd: add module description and license for the snd-msnd-lib
by Krzysztof Helt 02 Feb '09

02 Feb '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> The missing module license generates warning during module loading. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- sound/isa/msnd/msnd.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/sound/isa/msnd/msnd.c b/sound/isa/msnd/msnd.c index 264e082..9064544 100644 --- a/sound/isa/msnd/msnd.c +++ b/sound/isa/msnd/msnd.c @@ -700,3 +700,6 @@ int snd_msnd_pcm(struct snd_card *card, int device, } EXPORT_SYMBOL(snd_msnd_pcm); +MODULE_DESCRIPTION("Common routines for Turtle Beach Multisound drivers"); +MODULE_LICENSE("GPL"); + -- 1.5.2.2 ---------------------------------------------------------------------- Konkurs Walentynkowy! Wybierz nagrode i wygraj! Sprawdz >> http://link.interia.pl/f2039

2 1

[alsa-devel] [PATCH] sscape: drop redundant fields from soundscape struct
by Krzysztof Helt 02 Feb '09

02 Feb '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> The wss_base is disguised parameter for one function. It is converted to a function parameter. The code_type is only set but never read. It is removed. The midi_vol is set only to 0 so it does not work as detection of change in midi volume. It is removed. The xport variable is alias to the port[dev]. Use the port[dev] directly to increase readability. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- sound/isa/sscape.c | 42 ++++++++++++++---------------------------- 1 files changed, 14 insertions(+), 28 deletions(-) diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 681e223..c6a90f0 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -135,8 +135,6 @@ enum card_type { struct soundscape { spinlock_t lock; unsigned io_base; - unsigned wss_base; - int codec_type; int ic_type; enum card_type type; struct resource *io_res; @@ -152,7 +150,6 @@ struct soundscape { spinlock_t fwlock; int hw_in_use; unsigned long midi_usage; - unsigned char midi_vol; }; #define INVALID_IRQ ((unsigned)-1) @@ -760,14 +757,9 @@ static int sscape_midi_put(struct snd_kcontrol *kctl, * and then perform another volume-related command. Perhaps the * first command is an "open" and the second command is a "close"? */ - if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) { - change = 0; - goto __skip_change; - } change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100) && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)); - __skip_change: /* * Take the board out of HOST mode and back into MIDI mode ... @@ -809,12 +801,11 @@ static unsigned __devinit get_irq_config(int irq) * Perform certain arcane port-checks to see whether there * is a SoundScape board lurking behind the given ports. */ -static int __devinit detect_sscape(struct soundscape *s) +static int __devinit detect_sscape(struct soundscape *s, long wss_io) { unsigned long flags; unsigned d; int retval = 0; - int codec = s->wss_base; spin_lock_irqsave(&s->lock, flags); @@ -830,13 +821,11 @@ static int __devinit detect_sscape(struct soundscape *s) if ((d & 0x80) != 0) goto _done; - if (d == 0) { - s->codec_type = 1; + if (d == 0) s->ic_type = IC_ODIE; - } else if ((d & 0x60) != 0) { - s->codec_type = 2; + else if ((d & 0x60) != 0) s->ic_type = IC_OPUS; - } else + else goto _done; outb(0xfa, ODIE_ADDR_IO(s->io_base)); @@ -856,10 +845,10 @@ static int __devinit detect_sscape(struct soundscape *s) sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); if (s->type == SSCAPE_VIVO) - codec += 4; + wss_io += 4; /* wait for WSS codec */ for (d = 0; d < 500; d++) { - if ((inb(codec) & 0x80) == 0) + if ((inb(wss_io) & 0x80) == 0) break; spin_unlock_irqrestore(&s->lock, flags); msleep(1); @@ -1057,7 +1046,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) unsigned dma_cfg; unsigned irq_cfg; unsigned mpu_irq_cfg; - unsigned xport; struct resource *io_res; struct resource *wss_res; unsigned long flags; @@ -1077,15 +1065,15 @@ static int __devinit create_sscape(int dev, struct snd_card *card) printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]); return -ENXIO; } - xport = port[dev]; /* * Grab IO ports that we will need to probe so that we * can detect and control this hardware ... */ - io_res = request_region(xport, 8, "SoundScape"); + io_res = request_region(port[dev], 8, "SoundScape"); if (!io_res) { - snd_printk(KERN_ERR "sscape: can't grab port 0x%x\n", xport); + snd_printk(KERN_ERR + "sscape: can't grab port 0x%lx\n", port[dev]); return -EBUSY; } wss_res = NULL; @@ -1112,10 +1100,9 @@ static int __devinit create_sscape(int dev, struct snd_card *card) spin_lock_init(&sscape->fwlock); sscape->io_res = io_res; sscape->wss_res = wss_res; - sscape->io_base = xport; - sscape->wss_base = wss_port[dev]; + sscape->io_base = port[dev]; - if (!detect_sscape(sscape)) { + if (!detect_sscape(sscape, wss_port[dev])) { printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base); err = -ENODEV; goto _release_dma; @@ -1188,11 +1175,11 @@ static int __devinit create_sscape(int dev, struct snd_card *card) } #define MIDI_DEVNUM 0 if (sscape->type != SSCAPE_VIVO) { - err = create_mpu401(card, MIDI_DEVNUM, xport, mpu_irq[dev]); + err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]); if (err < 0) { printk(KERN_ERR "sscape: Failed to create " - "MPU-401 device at 0x%x\n", - xport); + "MPU-401 device at 0x%lx\n", + port[dev]); goto _release_dma; } @@ -1204,7 +1191,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) /* * Initialize mixer */ - sscape->midi_vol = 0; host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100); host_write_ctrl_unsafe(sscape->io_base, 0, 100); host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100); -- 1.5.2.2 ---------------------------------------------------------------------- Doladuj telefon! Sprawdz >> http://link.interia.pl/f2047

2 1

[alsa-devel] Recalcitrant input pin on ALC262
by Tony Vroon 02 Feb '09

02 Feb '09

Good evening, Currently I am implementing full support for the Tyan Thunder n6650W and have noticed a pin complex that advertises input, but can't seem to be set to it: Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: As you can see the pin capabilities reflect input. However, even after issuing this in the model-specific verbs: {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, the pin-ctls firmly remains 0x00. Even the python-based hda-analyzer appears unable to flip the pin-ctls over to 0x20 and reports no error messages in the GUI or in the terminal. What am I missing please? Slightly related, is it considered acceptable to modify pin defaults if they are blatantly wrong? (Reported colour, N/A vs Fixed, etc) Regards, Tony V.

2 1

[alsa-devel] [PATCH 2/2] [EXPERIMENTAL] Add support for the latest IndigoIOx and IndigoDJx cards
by Giuliano Pochini 01 Feb '09

01 Feb '09

This patch adds to alsa-firmware the firmware needed by the IndigoIOx and IndigoDJx cards. It's too long to post here inline. Please download the compressed patch at this url: http://www.webalice.it/g_pochini/alsa-firmware_indigox.patch.bz2 The patch contains two c-coded blobs and the following patch: diff -duNrp alsa-firmware__orig/echoaudio/Makefile.am alsa-firmware/echoaudio/Makefile.am --- alsa-firmware__orig/echoaudio/Makefile.am 2008-06-07 22:18:23.000000000 +0200 +++ alsa-firmware/echoaudio/Makefile.am 2009-02-01 22:15:02.000000000 +0100 @@ -26,7 +26,9 @@ firmware_files = \ 3g_asic.fw \ indigo_dsp.fw \ indigo_io_dsp.fw \ - indigo_dj_dsp.fw + indigo_iox_dsp.fw \ + indigo_dj_dsp.fw \ + indigo_djx_dsp.fw noinst_PROGRAMS = fw_writer fw_writer_SOURCES = fw_writer.c @@ -57,7 +59,9 @@ EXTRA_DIST = DSP/LoaderDSP.c \ ASIC/3G_ASIC.c \ DSP/IndigoDSP.c \ DSP/IndigoIODSP.c \ + DSP/IndigoIOxDSP.c \ DSP/IndigoDJDSP.c \ + DSP/IndigoDJxDSP.c \ fw_writer.c CLEANFILES = $(firmware_files) fw_writer @@ -97,4 +101,6 @@ $(firmware_files): fw_writer ./fw_writer ASIC/3G_ASIC.c 3g_asic.fw ./fw_writer DSP/IndigoDSP.c indigo_dsp.fw ./fw_writer DSP/IndigoIODSP.c indigo_io_dsp.fw + ./fw_writer DSP/IndigoIOxDSP.c indigo_iox_dsp.fw ./fw_writer DSP/IndigoDJDSP.c indigo_dj_dsp.fw + ./fw_writer DSP/IndigoDJxDSP.c indigo_djx_dsp.fw -- Giuliano.

1 0

[alsa-devel] work in progress: USB driver for Behringer BCD 2000
by Frank van de Pol 01 Feb '09

01 Feb '09

I'm currently working on Alsa support for the Behringer BCD 2000, a DJ control surface (http://www.behringer.com/EN/Products/BCD2000.aspx). Unfortunate this device does not act as a standard class device. Since proper technical documentation from Behringer is non-existent my work is based on analysis of the USB data stream. Current status: - driver supports midi input data for all controls/buttons that are able to send midi data (some of tje controls do not send out data but are hardwired to the analogue circuitry, eg. headphone volume etc.) still todo: - get the midi-output working to allow control of the LEDs on the control surface. - cleanup of the code (mostly remove debugging stuff) - documentation The unit has also a 4 channel 24-bit audio interface; at the moment I have little interest in trying to get this audio interface operational. If anyone else on this list has a similar device and would like to test it please let me know so I can send patches. Regards, Frank.

1 0

[alsa-devel] [PATCH] pcxhr: fix trivial typo
by Tim Blechmann 31 Jan '09

31 Jan '09

Signed-off-by: Tim Blechmann <tim(a)klingt.org> --- sound/pci/pcxhr/pcxhr_core.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/pci/pcxhr/pcxhr_core.h b/sound/pci/pcxhr/pcxhr_core.h index bbbd66d..be01737 100644 --- a/sound/pci/pcxhr/pcxhr_core.h +++ b/sound/pci/pcxhr/pcxhr_core.h @@ -1,7 +1,7 @@ /* * Driver for Digigram pcxhr compatible soundcards * - * low level interface with interrupt ans message handling + * low level interface with interrupt and message handling * * Copyright (c) 2004 by Digigram <alsa(a)digigram.com> * -- 1.5.6.3

2 1

[alsa-devel] [PATCH] ASoC: Update OMAP3 pandora board file
by Grazvydas Ignotas 31 Jan '09

31 Jan '09

Update pandora board file for recent TWL4030 codec changes. Also move output related snd_soc_dapm_nc_pin() calls to omap3pandora_out_init(), where they belong. Signed-off-by: Grazvydas Ignotas <notasas(a)gmail.com> --- sound/soc/omap/omap3pandora.c | 49 ++++++++++++++++++++++++---------------- 1 files changed, 29 insertions(+), 20 deletions(-) diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c index fcc2f5d..fe282d4 100644 --- a/sound/soc/omap/omap3pandora.c +++ b/sound/soc/omap/omap3pandora.c @@ -143,7 +143,7 @@ static const struct snd_soc_dapm_widget omap3pandora_out_dapm_widgets[] = { }; static const struct snd_soc_dapm_widget omap3pandora_in_dapm_widgets[] = { - SND_SOC_DAPM_MIC("Mic (Internal)", NULL), + SND_SOC_DAPM_MIC("Mic (internal)", NULL), SND_SOC_DAPM_MIC("Mic (external)", NULL), SND_SOC_DAPM_LINE("Line In", NULL), }; @@ -155,16 +155,33 @@ static const struct snd_soc_dapm_route omap3pandora_out_map[] = { }; static const struct snd_soc_dapm_route omap3pandora_in_map[] = { - {"INL", NULL, "Line In"}, - {"INR", NULL, "Line In"}, - {"INL", NULL, "Mic (Internal)"}, - {"INR", NULL, "Mic (external)"}, + {"AUXL", NULL, "Line In"}, + {"AUXR", NULL, "Line In"}, + + {"MAINMIC", NULL, "Mic Bias 1"}, + {"Mic Bias 1", NULL, "Mic (internal)"}, + + {"SUBMIC", NULL, "Mic Bias 2"}, + {"Mic Bias 2", NULL, "Mic (external)"}, }; static int omap3pandora_out_init(struct snd_soc_codec *codec) { int ret; + /* All TWL4030 output pins are floating */ + snd_soc_dapm_nc_pin(codec, "OUTL"); + snd_soc_dapm_nc_pin(codec, "OUTR"); + snd_soc_dapm_nc_pin(codec, "EARPIECE"); + snd_soc_dapm_nc_pin(codec, "PREDRIVEL"); + snd_soc_dapm_nc_pin(codec, "PREDRIVER"); + snd_soc_dapm_nc_pin(codec, "HSOL"); + snd_soc_dapm_nc_pin(codec, "HSOR"); + snd_soc_dapm_nc_pin(codec, "CARKITL"); + snd_soc_dapm_nc_pin(codec, "CARKITR"); + snd_soc_dapm_nc_pin(codec, "HFL"); + snd_soc_dapm_nc_pin(codec, "HFR"); + ret = snd_soc_dapm_new_controls(codec, omap3pandora_out_dapm_widgets, ARRAY_SIZE(omap3pandora_out_dapm_widgets)); if (ret < 0) @@ -180,18 +197,11 @@ static int omap3pandora_in_init(struct snd_soc_codec *codec) { int ret; - /* All TWL4030 output pins are floating */ - snd_soc_dapm_nc_pin(codec, "OUTL"), - snd_soc_dapm_nc_pin(codec, "OUTR"), - snd_soc_dapm_nc_pin(codec, "EARPIECE"), - snd_soc_dapm_nc_pin(codec, "PREDRIVEL"), - snd_soc_dapm_nc_pin(codec, "PREDRIVER"), - snd_soc_dapm_nc_pin(codec, "HSOL"), - snd_soc_dapm_nc_pin(codec, "HSOR"), - snd_soc_dapm_nc_pin(codec, "CARKITL"), - snd_soc_dapm_nc_pin(codec, "CARKITR"), - snd_soc_dapm_nc_pin(codec, "HFL"), - snd_soc_dapm_nc_pin(codec, "HFR"), + /* Not comnnected */ + snd_soc_dapm_nc_pin(codec, "HSMIC"); + snd_soc_dapm_nc_pin(codec, "CARKITMIC"); + snd_soc_dapm_nc_pin(codec, "DIGIMIC0"); + snd_soc_dapm_nc_pin(codec, "DIGIMIC1"); ret = snd_soc_dapm_new_controls(codec, omap3pandora_in_dapm_widgets, ARRAY_SIZE(omap3pandora_in_dapm_widgets)); @@ -251,10 +261,9 @@ static int __init omap3pandora_soc_init(void) { int ret; - if (!machine_is_omap3_pandora()) { - pr_debug(PREFIX "Not OMAP3 Pandora\n"); + if (!machine_is_omap3_pandora()) return -ENODEV; - } + pr_info("OMAP3 Pandora SoC init\n"); ret = gpio_request(OMAP3_PANDORA_DAC_POWER_GPIO, "dac_power"); -- 1.5.6.3

2 1