- Alsa-devel - mailman.alsa-project.org

[alsa-devel] Conexant CX20582 HDA codec support
by Daniel Drake 03 Jul '09

03 Jul '09

Hi, I'm working on some sound issues with the new OLPC XO-1.5 alpha board. This laptop is now based on a VIA VX855 chipset and our board includes a CX20582-10Q HDA codec. We are running kernel v2.6.30. We have a few issues, which are: 1. Volume range is ridiculous, you can go all the way down to -74dB gain. Beyond -42dB you can barely hear anything from the speakers, and I note that all my other systems only go down as far as -46.5dB. 2. No microphone automute. The internal microphone continues recording sound while there is an external one plugged in. 3. No speaker automute. The internal speakers continue playing sound while there are headphones plugged in. 4. Mixer arrangement is odd. There are 3 microphones: Mic, Mic 1, and Mic 2. Mic (the default) records nothing. Mic 1 and Mic 2 both seem to behave the same, and record from both internal and external microphones. I looked into adding some quirks into patch_conexant.c to hopefully solve some of the above. However I note that there is no support for the CX20582, hence the generic HDA parser is being used. How has support for the other CX chips been developed -- are datasheets always required? (I'll try and get hold of one anyway) Here is some more info. codec dump http://dev.laptop.org/~dsd/20090629/codec0.txt codec graph http://dev.laptop.org/~dsd/20090629/codecgraph.svg lspci entry http://dev.laptop.org/~dsd/20090629/lspci-entry.txt verbose dmesg from probing http://dev.laptop.org/~dsd/20090629/dmesg-probe.txt Any thoughts/input appreciated! Thanks, Daniel

4 8

[alsa-devel] [PATCH] Sample generation on big endian platforms was broken.
by Kenneth Johansson 03 Jul '09

03 Jul '09

Has not worked since commit 3d1fa924906996463ac33cba5b5143f762d913cf Signed-off-by: Kenneth Johansson <kenneth(a)southpole.se> --- test/pcm.c | 24 ++++++++++++++---------- 1 files changed, 14 insertions(+), 10 deletions(-) diff --git a/test/pcm.c b/test/pcm.c index ee27422..9b8a923 100644 --- a/test/pcm.c +++ b/test/pcm.c @@ -34,14 +34,11 @@ static void generate_sine(const snd_pcm_channel_area_t *areas, static double max_phase = 2. * M_PI; double phase = *_phase; double step = max_phase*freq/(double)rate; - double res; + int res; unsigned char *samples[channels], *tmp; int steps[channels]; - unsigned int chn, byte; - union { - int i; - unsigned char c[4]; - } ires; + unsigned int chn; + unsigned int maxval = (1 << (snd_pcm_format_width(format) - 1)) - 1; int bps = snd_pcm_format_width(format) / 8; /* bytes per sample */ @@ -62,11 +59,18 @@ static void generate_sine(const snd_pcm_channel_area_t *areas, /* fill the channel areas */ while (count-- > 0) { res = sin(phase) * maxval; - ires.i = res; - tmp = ires.c; for (chn = 0; chn < channels; chn++) { - for (byte = 0; byte < (unsigned int)bps; byte++) - *(samples[chn] + byte) = tmp[byte]; + /* Generate data in native endian format */ + switch(bps){ + case 1: + *(samples[chn]) = res; + break; + case 2: + *(short*)(samples[chn]) = res; + break; + case 4: + *(int*)(samples[chn]) = res; + } samples[chn] += steps[chn]; } phase += step; -- 1.6.1.GIT

2 10

Re: [alsa-devel] MCP7A HDMI passthrough audio Linux/ALSA
by Stephane BERTHELOT 03 Jul '09

03 Jul '09

Takashi Iwai a écrit : > At Tue, 30 Jun 2009 15:04:05 +0200, > Stéphane BERTHELOT wrote: > >> Hi Takashi, >> >> Thanks for you answer. >> I have the exact same problem and configuration than reported here >> https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4406 >> apart : >> - I'm using a ION platform (Acer Revo R3600 but still MCP7A : 0x10de0007) >> - I never get the Dolby Digital or DTS indicator illuminated on my Amp. >> - My TV is a Sharp LC-52X20E >> >> I thought this was a known problem and than someone at Nvidia could >> provide the missing HDA Verbs, if you prefer I can post to the >> alsa-devel mailing list to investigate further. >> I can get a alsa-info output tonight, though it's very very similar to >> the one in the bug report. (and Raymond was saying that we should get >> "PCM AC3" on digital outputs) >> > > Try ac3dec for a primary testing instead of mplayer. It's included in > alsa-tools. > > % ac3dec -C -H foo.ac3 > > Use the latest one so that it accespt -H option. > > > Takashi > > > Thank you Takashi for taking time to review my problem. I cc'ed alsa-devel since I have more info now and maybe some other people have the same problem or already a workaround. I'm attaching the output of alsa-info.sh with my mixer settings and after having run ac3dec -H -C file.ac3 It works with -R instead of -C but does not work with -C or with -P (consumer or pro) I also tried modifying settings using iecset (audio off / audio on and consumer/pro) and no combination seems to work. When I play stereo LPCM my TV set plays sound and so does my Amp in PCM mode. When I try to play in AC3 mode (-C) my TV set says "incompatible format received" and both the TV and Amp stay silent. I may try again on XP/Vista tomorrow to be really sure it works on them. When changing play mode AES0 changes from 0x00 to 0x02 and AES1 to AES3 stay the same (0x82,0x00,0x02 if I remember well) Is there any other test you want me to do, I'll have time tomorrow evening (CEST). Thanks a lot, Stephane. (http://www.alsa-project.org/db/?f=cf3bc4202b4fcbf93ba68db55e492d51a3e46177) !!################################ !!ALSA Information Script v 0.4.56 !!################################ !!Script ran on: Tue Jun 30 20:22:23 UTC 2009 !!Linux Distribution !!------------------ Slackware 13.0.0.0.0 !!Kernel Information !!------------------ Kernel release: 2.6.29.5 Operating System: GNU/Linux Architecture: x86_64 Processor: Intel(R) Atom(TM) CPU 230 @ 1.60GHz SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.20 Library version: 1.0.18 Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Sound Servers on this system !!---------------------------- ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfae78000 irq 22 !!PCI Soundcards installed in the system !!-------------------------------------- 00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:08.0 0403: 10de:0ac0 (rev b1) Subsystem: 1025:0222 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL> index : -1,-1,-1,-1,-1,-1,-1,-1 model : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL> position_fix : 0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1 probe_only : N,N,N,N,N,N,N,N single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Realtek ALC662 rev1 Address: 0 Function Id: 0x1 Vendor Id: 0x10ec0662 Subsystem Id: 0x10250222 Revision Id: 0x100101 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x89 0x89] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x04 0x0b Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001003c: IN OUT HP EAPD Detect EAPD 0x0: Pin Default 0x01214010: [Jack] HP Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=00, enabled=0 Connection: 1 0x0c Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x99130120: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0d Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000034: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0e Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00001734: IN OUT Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x01a19830: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x0e Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000173c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0e Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000034: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0d Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000173c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0e Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x00000020: IN Pin Default 0x40020601: [N/A] Line Out at Ext N/A Conn = 1/4, Color = Unknown DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=12 Processing Coefficient: 0x00 Coefficient Index: 0x06 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono Codec: Nvidia MCP7A HDMI Address: 3 Function Id: 0x1 Vendor Id: 0x10de0007 Subsystem Id: 0x10de0101 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled Non-Audio Pro Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x18560110: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560121: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x06 Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560122: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x2 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x08 Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560123: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x3 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x0a Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560124: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x4 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x0c --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 0 Jul 1 2009 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 4 Jul 1 2009 /dev/snd/hwC0D0 crw-rw---- 1 root audio 116, 7 Jul 1 2009 /dev/snd/hwC0D3 crw-rw---- 1 root audio 116, 24 Jul 1 2009 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 16 Jun 30 22:11 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 19 Jun 30 22:21 /dev/snd/pcmC0D3p crw-rw---- 1 root audio 116, 1 Jun 30 22:10 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Jul 1 2009 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) #pcm.!default { # type plug # slave.pcm "hdmi" #} pcm.hdmiconv { type plug slave { pcm "hw:0,3" rate 48000 } } pcm.headset { type bluetooth } ctl.headset { type bluetooth } !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC662 Analog [ALC662 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC662 Analog [ALC662 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [NVidia] Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 22' Mixer name : 'Nvidia MCP7A HDMI' Components : 'HDA:10ec0662,10250222,00100101 HDA:10de0007,10de0101,00100100' Controls : 18 Simple ctrls : 9 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 64 Mono: Playback 52 [81%] [-12.00dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 64 Mono: Front Left: Playback 0 [0%] [-64.00dB] [on] Front Right: Playback 0 [0%] [-64.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 213 [84%] [-8.40dB] Front Right: Playback 213 [84%] [-8.40dB] Simple mixer control 'Front',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 64 Mono: Front Left: Playback 52 [81%] [-12.00dB] [on] Front Right: Playback 52 [81%] [-12.00dB] [on] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] Front Right: 0 [0%] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 0 [0%] [-13.50dB] [on] Front Right: Capture 0 [0%] [-13.50dB] [on] Simple mixer control 'Beep',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [on] Front Right: Playback 0 [0%] [-34.50dB] [on] !!Alsactl output !!------------- --startcollapse-- state.NVidia { control.1 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 64' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Front Playback Volume' value.0 52 value.1 52 } control.2 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Front Playback Switch' value.0 true value.1 true } control.3 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 64' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Headphone Playback Volume' value.0 0 value.1 0 } control.4 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Headphone Playback Switch' value.0 true value.1 true } control.5 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Mic Playback Volume' value.0 0 value.1 0 } control.6 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Mic Playback Switch' value.0 false value.1 false } control.7 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 3' comment.dbmin 0 comment.dbmax 3000 iface MIXER name 'Mic Boost' value.0 0 value.1 0 } control.8 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Capture Switch' value.0 true value.1 true } control.9 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -1350 comment.dbmax 3300 iface MIXER name 'Capture Volume' value.0 0 value.1 0 } control.10 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Beep Playback Volume' value.0 0 value.1 0 } control.11 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Beep Playback Switch' value.0 true value.1 true } control.12 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 64' comment.dbmin -6400 comment.dbmax 0 iface MIXER name 'Master Playback Volume' value 52 } control.13 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Master Playback Switch' value true } control.14 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.15 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.16 { comment.access 'read write' comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Default' value '0782000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.17 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Playback Switch' value true } control.18 { comment.access 'read write user' comment.type INTEGER comment.count 2 comment.range '0 - 255' comment.tlv '0000000100000008ffffec1400000014' comment.dbmin -5100 comment.dbmax 0 iface MIXER name 'PCM Playback Volume' value.0 213 value.1 213 } } --endcollapse-- !!All Loaded Modules !!------------------ Module snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ipv6 ppdev lp parport_pc parport fuse snd_hda_codec_nvhdmi nvidia snd_hda_codec_realtek ath5k mac80211 rfkill led_class snd_hda_intel cfg80211 snd_hda_codec psmouse serio_raw shpchp snd_hwdep snd_pcm snd_timer sg snd soundcore forcedeth snd_page_alloc rtc_cmos rtc_core thermal wmi rtc_lib processor button thermal_sys hwmon evdev

2 5

[alsa-devel] [PATCH] [RFC 13/13] Intel SST Driver Config changes & makefile
by Vinod Koul 03 Jul '09

03 Jul '09

This patch adds the makefiles and Kconfig changes for both SST and MAD drivers Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Harsha Priya <priya.harsha(a)intel.com> modified: sound/pci/Kconfig modified: sound/pci/Makefile new file: sound/pci/sst/Makefile --- sound/pci/Kconfig | 45 +++++++++++++++++++++++++++++++++++++++++++++ sound/pci/Makefile | 4 +++- sound/pci/sst/Makefile | 9 +++++++++ 3 files changed, 57 insertions(+), 1 deletions(-) create mode 100644 sound/pci/sst/Makefile diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 748f6b7..6901393 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -9,6 +9,51 @@ menuconfig SND_PCI if SND_PCI +config SND_INTEL_SST + bool "MRST SST DRIVER" + depends on X86 && LNW_IPC + default y + help + Say Y here to include support + +config SST_OSPM_SUPPORT + bool "MRST SST DRIVER SUPPORT for OSPM" + depends on SND_INTEL_SST && MSTWN_POWER_MGMT + default n + help + Say Y here to include support in SST driver for OSPM + +config SST_IPC_NOT_INCLUDED + bool "IPC NOT INCLUDED" + depends on SND_INTEL_SST + default y + help + Say Y here to include workaround in LPE driver for removing + IPC Driver calls + +config SST_DBG_PRINT + bool "MRST SST DRIVER DEBUG PRINTS" + depends on SND_INTEL_SST + default n + help + Say Y here to include debug prints for SST driver + +config SND_INTELMID + bool "MRST SOUND CARD DRIVER" + depends on SND_INTEL_SST && SPI_MRST + default y + select SND_MIXER_OSS + select SND_PCM_OSS + help + Say Y here to include support + +config MID_DBG_PRINT + bool "MRST MID DRIVER DEBUG PRINTS" + depends on SND_INTELMID + default n + help + Say Y here to include debug prints for MAD driver + config SND_AD1889 tristate "Analog Devices AD1889" select SND_AC97_CODEC diff --git a/sound/pci/Makefile b/sound/pci/Makefile index ecfc609..0aea1bc 100644 --- a/sound/pci/Makefile +++ b/sound/pci/Makefile @@ -77,4 +77,6 @@ obj-$(CONFIG_SND) += \ rme9652/ \ trident/ \ ymfpci/ \ - vx222/ + vx222/ \ + sst/ + diff --git a/sound/pci/sst/Makefile b/sound/pci/sst/Makefile new file mode 100644 index 0000000..e87dae5 --- /dev/null +++ b/sound/pci/sst/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for Intel MID Audio drivers +# +EXTRA_CFLAGS=-g +snd-intel-sst-objs := intel_sst.o intel_sst_ipc.o intel_sst_stream.o intel_sst_interface.o +snd-intelmid-objs := intelmid.o intelmid_v0_control.o intelmid_v1_control.o intelmid_v2_control.o +# Toplevel Module Dependency +obj-$(CONFIG_SND_INTEL_SST) += snd-intel-sst.o +obj-$(CONFIG_SND_INTELMID) += snd-intelmid.o -- 1.5.4.5

2 1

Re: [alsa-devel] [PATCH] Enable loudspeakers in ALC889 for Acers and others
by ruben＠ugr.es 03 Jul '09

03 Jul '09

> At Thu, 2 Jul 2009 22:12:02 +0200 (CEST), > ruben(a)ugr.es wrote: >> >> > At Wed, 1 Jul 2009 20:04:36 +0200 (CEST), >> > ruben(a)ugr.es wrote: >> >> >> >> Hi all >> >> >> >> I managed to get sound working on my acer 6935, which has an ALC889 >> >> driven >> >> by the intel_hda driver >> >> The lack of sound seems to appear in other laptops as well. >> >> ... >> > Does this happen even with the latest alsa-driver snapshot? >> > ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-sna… >> > >> > >> > Takashi >> > >> >> I installed the snapshot, and it has some good things and some bad >> things. >> --Good new things >> -The loudspeakers work correctly on boot. >> -The headphones jack sense works, and mutes the loudspeakers when I >> insert >> headphones. >> >> --Bad new things >> -The headphones don't provide any sound (regression with respect to >> 1.0.20), >> I put all the bars to maximum, but no luck. >> >> Do you think I can activate the headphones with hda-verb? > > Better run alsa-info.sh (with --no-upload option) on both 1.0.20 and > the latest snapshot, and attach the generated files. > > The regression is likely because of my latest change (merging alc882 and > alc883 parsers). Earlier is easier to fix :) > > > thanks, > > Takashi > Attached alsa info from yesterday's snapshot, todays, and 1.0.20 (vanilla, without my patch). The volume levels are not exactly the same; I can redo them if you want. Headphones are still muted in today's snapshot.

2 4

Re: [alsa-devel] No sound with nVidia Corporation MCP79 High Definition Audio (rev b1) (Macbook Pro 5, 5)
by Sean Burke 03 Jul '09

03 Jul '09

A quick google shows that the vendor ID is Cirrus Logic. The Boot Camp driver set does include installers for Cirrus audio cards. I don't have Windows installed on here, so I can't check to see if it is indeed the Cirrus drivers that get installed. What can be done to facilitate the implementation of this codec? Sean

3 10

[alsa-devel] [PATCH] ASoC: Fix wm8753 register cache size and initialization
by Lars-Peter Clausen 03 Jul '09

03 Jul '09

The register cache size is of by one. There are 63 registers in use but the register cache size has only space for 62. Furthermore the codec's reg_cache_size is of by another one. Since the wm8753 register cache uses one-based indexing we have to add one to its size. Register cache initialization only copied the first sizeof(void*) elements leaving the others uninitialized. Fix it by using the size of the reg cache template. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/soc/codecs/wm8753.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index d28eeac..18a3ef9 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -79,7 +79,7 @@ static const u16 wm8753_reg[] = { 0x0097, 0x0097, 0x0000, 0x0004, 0x0000, 0x0083, 0x0024, 0x01ba, 0x0000, 0x0083, 0x0024, 0x01ba, - 0x0000, 0x0000 + 0x0000, 0x0000, 0x0000 }; /* codec private data */ @@ -1660,11 +1660,11 @@ static int wm8753_register(struct wm8753_priv *wm8753) codec->set_bias_level = wm8753_set_bias_level; codec->dai = wm8753_dai; codec->num_dai = 2; - codec->reg_cache_size = ARRAY_SIZE(wm8753->reg_cache); + codec->reg_cache_size = ARRAY_SIZE(wm8753->reg_cache) + 1; codec->reg_cache = &wm8753->reg_cache; codec->private_data = wm8753; - memcpy(codec->reg_cache, wm8753_reg, sizeof(codec->reg_cache)); + memcpy(codec->reg_cache, wm8753_reg, sizeof(wm8753_reg)); INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work); ret = wm8753_reset(codec); -- 1.5.6.5

2 3

[alsa-devel] [PATCH] ASoC: TWL4030: Add tristate callbacks for HiFi and Voice
by Lopez Cruz, Misael 03 Jul '09

03 Jul '09

Add "set_tristate" callbacks for HiFi and Voice DAIs. Machine drivers can enable and disable tristate for each DAI with "snd_soc_dai_set_tristate" function. Signed-off-by: Misael Lopez Cruz <x0052729(a)ti.com> --- sound/soc/codecs/twl4030.c | 28 ++++++++++++++++++++++++++++ 1 files changed, 28 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 6da94ca..818fb37 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -1849,6 +1849,19 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai, return 0; } +static int twl4030_set_tristate(struct snd_soc_dai *dai, int tristate) +{ + struct snd_soc_codec *codec = dai->codec; + u8 reg = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF); + + if (tristate) + reg |= TWL4030_AIF_TRI_EN; + else + reg &= ~TWL4030_AIF_TRI_EN; + + return twl4030_write(codec, TWL4030_REG_AUDIO_IF, reg); +} + /* In case of voice mode, the RX1 L(VRX) for downlink and the TX2 L/R * (VTXL, VTXR) for uplink has to be enabled/disabled. */ static void twl4030_voice_enable(struct snd_soc_codec *codec, int direction, @@ -2023,6 +2036,19 @@ static int twl4030_voice_set_dai_fmt(struct snd_soc_dai *codec_dai, return 0; } +static int twl4030_voice_set_tristate(struct snd_soc_dai *dai, int tristate) +{ + struct snd_soc_codec *codec = dai->codec; + u8 reg = twl4030_read_reg_cache(codec, TWL4030_REG_VOICE_IF); + + if (tristate) + reg |= TWL4030_VIF_TRI_EN; + else + reg &= ~TWL4030_VIF_TRI_EN; + + return twl4030_write(codec, TWL4030_REG_VOICE_IF, reg); +} + #define TWL4030_RATES (SNDRV_PCM_RATE_8000_48000) #define TWL4030_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE) @@ -2032,6 +2058,7 @@ static struct snd_soc_dai_ops twl4030_dai_ops = { .hw_params = twl4030_hw_params, .set_sysclk = twl4030_set_dai_sysclk, .set_fmt = twl4030_set_dai_fmt, + .set_tristate = twl4030_set_tristate, }; static struct snd_soc_dai_ops twl4030_dai_voice_ops = { @@ -2040,6 +2067,7 @@ static struct snd_soc_dai_ops twl4030_dai_voice_ops = { .hw_params = twl4030_voice_hw_params, .set_sysclk = twl4030_voice_set_dai_sysclk, .set_fmt = twl4030_voice_set_dai_fmt, + .set_tristate = twl4030_voice_set_tristate, }; struct snd_soc_dai twl4030_dai[] = { -- 1.5.4.3

3 2

[alsa-devel] [PATCH] ASoC: Zoom2: Update twl4030_setup_data parameters
by Candelaria Villareal, Jorge 03 Jul '09

03 Jul '09

Add support for EXTMUTE in Zoom2 machine driver. This is necessary to further reduce pop noise problem. Signal EXTMUTE is connected to signal GPIO 153 in Zoom2 board. In addition, change ramp delay value to 3 (218/161/109 ms). With previous ramp delay value, pop noise was louder. With a longer value the beep tone can be observed. Signed-off-by: Jorge Eduardo Candelaria <x0107209(a)ti.com> --- sound/soc/omap/zoom2.c | 17 +++++++++++++++-- 1 files changed, 15 insertions(+), 2 deletions(-) diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c index be2e307..ec549a4 100644 --- a/sound/soc/omap/zoom2.c +++ b/sound/soc/omap/zoom2.c @@ -35,7 +35,8 @@ #include "omap-pcm.h" #include "../codecs/twl4030.h" -#define ZOOM2_HEADSET_MUX_GPIO (OMAP_MAX_GPIO_LINES + 15) +#define ZOOM2_HEADSET_MUX_GPIO (OMAP_MAX_GPIO_LINES + 15) +#define ZOOM2_HEADSET_EXTMUTE_GPIO 153 static int zoom2_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) @@ -234,10 +235,18 @@ static struct snd_soc_card snd_soc_zoom2 = { .num_links = ARRAY_SIZE(zoom2_dai), }; +/* EXTMUTE callback function */ +void zoom2_set_hs_extmute(int mute) +{ + gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); +} + /* twl4030 setup */ static struct twl4030_setup_data twl4030_setup = { - .ramp_delay_value = 2, /* 81 ms */ + .ramp_delay_value = 3, /* 161 ms */ .sysclk = 26000, + .hs_extmute = 1, + .set_hs_extmute = zoom2_set_hs_extmute, }; /* Audio subsystem */ @@ -277,6 +286,9 @@ static int __init zoom2_soc_init(void) BUG_ON(gpio_request(ZOOM2_HEADSET_MUX_GPIO, "hs_mux") < 0); gpio_direction_output(ZOOM2_HEADSET_MUX_GPIO, 0); + BUG_ON(gpio_request(ZOOM2_HEADSET_EXTMUTE_GPIO, "ext_mute") < 0); + gpio_direction_output(ZOOM2_HEADSET_EXTMUTE_GPIO, 0); + return 0; err1: @@ -290,6 +302,7 @@ module_init(zoom2_soc_init); static void __exit zoom2_soc_exit(void) { gpio_free(ZOOM2_HEADSET_MUX_GPIO); + gpio_free(ZOOM2_HEADSET_EXTMUTE_GPIO); platform_device_unregister(zoom2_snd_device); } -- 1.6.0.4

3 2

[alsa-devel] [PATCH 1/2] ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared
by Grant Likely 03 Jul '09

03 Jul '09

From: Grant Likely <grant.likely(a)secretlab.ca> When doing register reads, it is possible for there to be a stale data ready bit set which will cause subsequent reads to return prematurely with incorrect data. This patch fixes the issues by ensuring stale data is cleared before starting another transaction. Signed-off-by: Grant Likely <grant.likely(a)secretlab.ca> --- sound/soc/fsl/mpc5200_psc_ac97.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c index 794a247..9b8503f 100644 --- a/sound/soc/fsl/mpc5200_psc_ac97.c +++ b/sound/soc/fsl/mpc5200_psc_ac97.c @@ -41,6 +41,10 @@ static unsigned short psc_ac97_read(struct snd_ac97 *ac97, unsigned short reg) pr_err("timeout on ac97 bus (rdy)\n"); return -ENODEV; } + + /* Force clear the data valid bit */ + in_be32(&psc_dma->psc_regs->ac97_data); + /* Send the read */ out_be32(&psc_dma->psc_regs->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24));

4 6