- Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 0/1 - try2] ASoC: debugfs support improvement
by Peter Ujfalusi 01 Oct '09

01 Oct '09

Hello, I have noticed that the support for multiple cards/codecs via the debugfs is kind of broken. The second codec, which tries to create the debugfs files would emit the following messages: ASoC: Failed to create codec register debugfs file Failed to create pop time debugfs file ... The following patch fixes this by adding a directory per codec to host the files. The additional directory is named as: {dev_name(socdev->dev)}-{codec->name} for example: debugfs/asoc/soc-audio.0-twl4030/... So it is easier to find the correct codec we are looking for. Note: The patch accidentally fixes one trailing space in the soc_pcm_apply_symmetry function. --- Peter Ujfalusi (1): ASoC: add support for multiple cards/codecs in debugfs include/sound/soc.h | 1 + sound/soc/soc-core.c | 28 ++++++++++++++++++++-------- 2 files changed, 21 insertions(+), 8 deletions(-)

2 8

[alsa-devel] [PATCH] ASoC: Use codec mutex in dapm_set_pga()
by ext-eero.nurkkala＠nokia.com 01 Oct '09

01 Oct '09

From: Eero Nurkkala <ext-eero.nurkkala(a)nokia.com> codec->mutex seems required if widget->* values are altered. Moreover, snd_soc_dapm_put_volsw() may alter widget->saved_value. dapm_set_pga() uses widget->saved_value in a for loop which now has a distant chance of getting out of control. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala(a)nokia.com> --- sound/soc/soc-dapm.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index f79711b..d6fb6c4 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -349,6 +349,7 @@ static int dapm_set_pga(struct snd_soc_dapm_widget *widget, int power) unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = mc->invert; + mutex_lock(&widget->codec->mutex); if (power) { int i; /* power up has happended, increase volume to last level */ @@ -373,6 +374,7 @@ static int dapm_set_pga(struct snd_soc_dapm_widget *widget, int power) } widget->muted = 1; } + mutex_unlock(&widget->codec->mutex); } return 0; } -- 1.6.0.4

3 7

[alsa-devel] adding hrtimer based delay to ioplug ALSA plugin on ARM9 (AT91) platform ?
by Stefan Schoenleitner 01 Oct '09

01 Oct '09

Hi, I'm currently developing an ALSA ioplug plugin which should transfer audio samples over UART to a DSP (I already wrote that in a previous post). The DSP wants to receive 156 - 164 audio samples with a sampling rate of 8 kHz and a format of S16_LE each 20 msec (which is more or less the number of audio samples multiplied by the period length of the sampling rate). My idea is to add a high precision delay to the transfer callback of the ALSA plugin. Unfortunately, I found out that the hrtimer resolution on the system is as low as 10ms: ------------------------------------------------------------------- kernel: hrtimer resolution: 0 sec, 10000000 nsec, loops_per_jiffy: 448512 ------------------------------------------------------------------- * Does this mean that if I use nanosleep for example each delay has to be an integral multiple of the hrtimer precision and for example a delay of 15ms would not be supported (since it is no integral multiple of 10ms) ? * It is possible to increase the precision (e.g. by changing the kernel configuration) ? * Do you know a better solution for the task, where the task is to send and receive audio samples to/from the DSP over UART and the timing is critical ? cheers, Stefan

1 0

[alsa-devel] ioplug plugin programming: HW_PERIOD_BYTES and HW_PERIODS constraints ?
by Stefan Schoenleitner 01 Oct '09

01 Oct '09

Hi, I'm currently developing an ALSA ioplug plugin that should transfer audio samples to a DSP over UART. In my plugin code I set up the hardware constrains (HW_PERIOD_BYTES and HW_PERIODS being among them) and then I utilize the transfer callback to send the audio chunk over UART. The DSP application would like to have exactly 156 - 164 audio samples at a time, where the sampling rate has to be 8 kHz and the format is S16_LE. In between there has to be a delay of 20ms (which is equal to 164 audio frames at a sampling rate of 8 kHz (i.e. 164 * 125us = 20,5 ms). For this reason I configured HW_PERIOD_BYTES with these values. The result is that each time the transfer callback gets called, exactly 312 bytes (thus 164 frames with each one having 2 bytes) are transfered. However, what I do not understand is the setup of HW_PERIODS which is AFAIK the number of periods being transfered at a time ? * What is the influence of this constraint on my ioplug plugin ? * How does it change the way data is being transfered with the transfer callback ? * What would be the correct setup for the mentioned application ? cheers, stefan

1 0

[alsa-devel] [PATCH] ASoC: fix kconfig order of Blackfin drivers
by Mike Frysinger 01 Oct '09

01 Oct '09

From: Barry Song <barry.song(a)analog.com> Some of the Blackfin options don't directly follow the kconfig options they depend on, so kconfig is unable to display the proper tree. So sort the options such they expand/collapse properly. Signed-off-by: Barry Song <barry.song(a)analog.com> Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- sound/soc/blackfin/Kconfig | 98 ++++++++++++++++++++++---------------------- 1 files changed, 49 insertions(+), 49 deletions(-) diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig index ac927ff..f91dcb1 100644 --- a/sound/soc/blackfin/Kconfig +++ b/sound/soc/blackfin/Kconfig @@ -7,15 +7,6 @@ config SND_BF5XX_I2S mode (supports single stereo In/Out). You will also need to select the audio interfaces to support below. -config SND_BF5XX_TDM - tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip" - depends on (BLACKFIN && SND_SOC) - help - Say Y or M if you want to add support for codecs attached to - the Blackfin SPORT (synchronous serial ports) interface in TDM - mode. - You will also need to select the audio interfaces to support below. - config SND_BF5XX_SOC_SSM2602 tristate "SoC SSM2602 Audio support for BF52x ezkit" depends on SND_BF5XX_I2S @@ -41,6 +32,31 @@ config SND_BFIN_AD73311_SE Enter the GPIO used to control AD73311's SE pin. Acceptable values are 0 to 7 +config SND_BF5XX_TDM + tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip" + depends on (BLACKFIN && SND_SOC) + help + Say Y or M if you want to add support for codecs attached to + the Blackfin SPORT (synchronous serial ports) interface in TDM + mode. + You will also need to select the audio interfaces to support below. + +config SND_BF5XX_SOC_AD1836 + tristate "SoC AD1836 Audio support for BF5xx" + depends on SND_BF5XX_TDM + select SND_BF5XX_SOC_TDM + select SND_SOC_AD1836 + help + Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. + +config SND_BF5XX_SOC_AD1938 + tristate "SoC AD1938 Audio support for Blackfin" + depends on SND_BF5XX_TDM + select SND_BF5XX_SOC_TDM + select SND_SOC_AD1938 + help + Say Y if you want to add support for AD1938 codec on Blackfin. + config SND_BF5XX_AC97 tristate "SoC AC97 Audio for the ADI BF5xx chip" depends on BLACKFIN @@ -71,6 +87,30 @@ config SND_BF5XX_MULTICHAN_SUPPORT Say y if you want AC97 driver to support up to 5.1 channel audio. this mode will consume much more memory for DMA. +config SND_BF5XX_HAVE_COLD_RESET + bool "BOARD has COLD Reset GPIO" + depends on SND_BF5XX_AC97 + default y if BFIN548_EZKIT + default n if !BFIN548_EZKIT + +config SND_BF5XX_RESET_GPIO_NUM + int "Set a GPIO for cold reset" + depends on SND_BF5XX_HAVE_COLD_RESET + range 0 159 + default 19 if BFIN548_EZKIT + default 5 if BFIN537_STAMP + default 0 + help + Set the correct GPIO for RESET the sound chip. + +config SND_BF5XX_SOC_AD1980 + tristate "SoC AD1980/1 Audio support for BF5xx" + depends on SND_BF5XX_AC97 + select SND_BF5XX_SOC_AC97 + select SND_SOC_AD1980 + help + Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. + config SND_BF5XX_SOC_SPORT tristate @@ -88,30 +128,6 @@ config SND_BF5XX_SOC_AC97 select SND_SOC_AC97_BUS select SND_BF5XX_SOC_SPORT -config SND_BF5XX_SOC_AD1836 - tristate "SoC AD1836 Audio support for BF5xx" - depends on SND_BF5XX_TDM - select SND_BF5XX_SOC_TDM - select SND_SOC_AD1836 - help - Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. - -config SND_BF5XX_SOC_AD1980 - tristate "SoC AD1980/1 Audio support for BF5xx" - depends on SND_BF5XX_AC97 - select SND_BF5XX_SOC_AC97 - select SND_SOC_AD1980 - help - Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. - -config SND_BF5XX_SOC_AD1938 - tristate "SoC AD1938 Audio support for Blackfin" - depends on SND_BF5XX_TDM - select SND_BF5XX_SOC_TDM - select SND_SOC_AD1938 - help - Say Y if you want to add support for AD1938 codec on Blackfin. - config SND_BF5XX_SPORT_NUM int "Set a SPORT for Sound chip" depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM) @@ -120,19 +136,3 @@ config SND_BF5XX_SPORT_NUM default 0 help Set the correct SPORT for sound chip. - -config SND_BF5XX_HAVE_COLD_RESET - bool "BOARD has COLD Reset GPIO" - depends on SND_BF5XX_AC97 - default y if BFIN548_EZKIT - default n if !BFIN548_EZKIT - -config SND_BF5XX_RESET_GPIO_NUM - int "Set a GPIO for cold reset" - depends on SND_BF5XX_HAVE_COLD_RESET - range 0 159 - default 19 if BFIN548_EZKIT - default 5 if BFIN537_STAMP - default 0 - help - Set the correct GPIO for RESET the sound chip. -- 1.6.5.rc2

2 1

[alsa-devel] [PATCH 24/34] don't use __devexit_p to wrap snd_sgio2audio_remove
by Uwe Kleine-König 01 Oct '09

01 Oct '09

The function snd_sgio2audio_remove is defined using __exit, so don't use __devexit_p but __exit_p to wrap it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> Cc: Takashi Iwai <tiwai(a)suse.de> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Figo.zhang <figo1802(a)gmail.com> Cc: alsa-devel(a)alsa-project.org Cc: linux-kernel(a)vger.kernel.org --- sound/mips/sgio2audio.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c index e497525..e24ba5a 100644 --- a/sound/mips/sgio2audio.c +++ b/sound/mips/sgio2audio.c @@ -984,7 +984,7 @@ static int __exit snd_sgio2audio_remove(struct platform_device *pdev) static struct platform_driver sgio2audio_driver = { .probe = snd_sgio2audio_probe, - .remove = __devexit_p(snd_sgio2audio_remove), + .remove = __exit_p(snd_sgio2audio_remove), .driver = { .name = "sgio2audio", .owner = THIS_MODULE, -- 1.6.4.3

1 0

[alsa-devel] [PATCH 0/1] ASoC: debugfs support improvement
by Peter Ujfalusi 01 Oct '09

01 Oct '09

Hello, I have noticed that the support for multiple cards/codecs via the debugfs is kind of broken. The second codec, which tries to create the debugfs files would emit the following messages: ASoC: Failed to create codec register debugfs file Failed to create pop time debugfs file ... The following patch fixes this by adding a directory per codec to host the files. The additional directory is named as codec->name, so it is easier to find the correct codec we are looking for. --- Peter Ujfalusi (1): ASoC: add support for multiple cards/codecs in debugfs include/sound/soc.h | 1 + sound/soc/soc-core.c | 21 ++++++++++++++------- 2 files changed, 15 insertions(+), 7 deletions(-)

2 6

[alsa-devel] [PATCH] sscape: convert to firmware loader framework
by Krzysztof Helt 01 Oct '09

01 Oct '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> The conversion solves the problem that firmware size was set to 64KB while non PnP cards have 128KB firmware files. An additional firmware initialization code has been moved from the OSS driver. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- This is the second version with fixes to issues pointed by Takashi and two mistakes in the original patch. Documentation/sound/alsa/ALSA-Configuration.txt | 8 +- include/sound/sscape_ioctl.h | 21 -- sound/isa/Kconfig | 8 +- sound/isa/sscape.c | 328 ++++++++--------------- 4 files changed, 116 insertions(+), 249 deletions(-) delete mode 100644 include/sound/sscape_ioctl.h diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 1c8eb45..cf98525 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1631,7 +1631,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-sscape ----------------- - Module for ENSONIQ SoundScape PnP cards. + Module for ENSONIQ SoundScape cards. port - Port # (PnP setup) wss_port - WSS Port # (PnP setup) @@ -1640,9 +1640,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. dma - DMA # (PnP setup) dma2 - 2nd DMA # (PnP setup, -1 to disable) - This module supports multiple cards. ISA PnP must be enabled. - You need sscape_ctl tool in alsa-tools package for loading - the microcode. + This module supports multiple cards. + + The driver requires the firmware loader support on kernel. Module snd-sun-amd7930 (on sparc only) -------------------------------------- diff --git a/include/sound/sscape_ioctl.h b/include/sound/sscape_ioctl.h deleted file mode 100644 index 0d88859..0000000 --- a/include/sound/sscape_ioctl.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef SSCAPE_IOCTL_H -#define SSCAPE_IOCTL_H - - -struct sscape_bootblock -{ - unsigned char code[256]; - unsigned version; -}; - -#define SSCAPE_MICROCODE_SIZE 65536 - -struct sscape_microcode -{ - unsigned char __user *code; -}; - -#define SND_SSCAPE_LOAD_BOOTB _IOWR('P', 100, struct sscape_bootblock) -#define SND_SSCAPE_LOAD_MCODE _IOW ('P', 101, struct sscape_microcode) - -#endif diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index b90fc16..02fe81c 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -372,9 +372,9 @@ config SND_SGALAXY config SND_SSCAPE tristate "Ensoniq SoundScape driver" - select SND_HWDEP select SND_MPU401_UART select SND_WSS_LIB + select FW_LOADER help Say Y here to include support for Ensoniq SoundScape and Ensoniq OEM soundcards. @@ -382,7 +382,11 @@ config SND_SSCAPE The PCM audio is supported on SoundScape Classic, Elite, PnP and VIVO cards. The supported OEM cards are SPEA Media FX and Reveal SC-600. - The MIDI support is very experimental. + The MIDI support is very experimental and requires binary + firmware files called "scope.cod" and "sndscape.co?" where the + ? is digit 0, 1, 2, 3 or 4. The firmware files can be found + in DOS or Windows driver packages. One has to put the firmware + files into the /lib/firmware directory. To compile this driver as a module, choose M here: the module will be called snd-sscape. diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index b11c35f..1ce465c 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -1,5 +1,5 @@ /* - * Low-level ALSA driver for the ENSONIQ SoundScape PnP + * Low-level ALSA driver for the ENSONIQ SoundScape * Copyright (c) by Chris Rankin * * This driver was written in part using information obtained from @@ -25,22 +25,26 @@ #include <linux/err.h> #include <linux/isa.h> #include <linux/delay.h> +#include <linux/firmware.h> #include <linux/pnp.h> #include <linux/spinlock.h> #include <linux/moduleparam.h> #include <asm/dma.h> #include <sound/core.h> -#include <sound/hwdep.h> #include <sound/wss.h> #include <sound/mpu401.h> #include <sound/initval.h> -#include <sound/sscape_ioctl.h> - MODULE_AUTHOR("Chris Rankin"); -MODULE_DESCRIPTION("ENSONIQ SoundScape PnP driver"); +MODULE_DESCRIPTION("ENSONIQ SoundScape driver"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("sndscape.co0"); +MODULE_FIRMWARE("sndscape.co1"); +MODULE_FIRMWARE("sndscape.co2"); +MODULE_FIRMWARE("sndscape.co3"); +MODULE_FIRMWARE("sndscape.co4"); +MODULE_FIRMWARE("scope.cod"); static int index[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IDX; static char* id[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_STR; @@ -142,14 +146,12 @@ struct soundscape { struct resource *wss_res; struct snd_wss *chip; struct snd_mpu401 *mpu; - struct snd_hwdep *hw; /* * The MIDI device won't work until we've loaded * its firmware via a hardware-dependent device IOCTL */ spinlock_t fwlock; - int hw_in_use; unsigned long midi_usage; unsigned char midi_vol; }; @@ -167,12 +169,6 @@ static inline struct soundscape *get_mpu401_soundscape(struct snd_mpu401 * mpu) return (struct soundscape *) (mpu->private_data); } -static inline struct soundscape *get_hwdep_soundscape(struct snd_hwdep * hw) -{ - return (struct soundscape *) (hw->private_data); -} - - /* * Allocates some kernel memory that we can use for DMA. * I think this means that the memory has to map to @@ -393,12 +389,12 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout) do { unsigned long flags; - unsigned char x; + int x; spin_lock_irqsave(&s->lock, flags); - x = inb(HOST_DATA_IO(s->io_base)); + x = host_read_unsafe(s->io_base); spin_unlock_irqrestore(&s->lock, flags); - if ((x & 0xfe) == 0xfe) + if (x == 0xfe || x == 0xff) return 1; msleep(10); @@ -420,10 +416,10 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout) do { unsigned long flags; - unsigned char x; + int x; spin_lock_irqsave(&s->lock, flags); - x = inb(HOST_DATA_IO(s->io_base)); + x = host_read_unsafe(s->io_base); spin_unlock_irqrestore(&s->lock, flags); if (x == 0xfe) return 1; @@ -438,14 +434,14 @@ static int host_startup_ack(struct soundscape *s, unsigned timeout) * Upload a byte-stream into the SoundScape using DMA channel A. */ static int upload_dma_data(struct soundscape *s, - const unsigned char __user *data, + const unsigned char *data, size_t size) { unsigned long flags; struct snd_dma_buffer dma; int ret; - if (!get_dmabuf(&dma, PAGE_ALIGN(size))) + if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024))) return -ENOMEM; spin_lock_irqsave(&s->lock, flags); @@ -458,7 +454,6 @@ static int upload_dma_data(struct soundscape *s, /* * Enable the DMA channels and configure them ... */ - sscape_write_unsafe(s->io_base, GA_DMACFG_REG, 0x50); sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT); sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20); @@ -468,35 +463,17 @@ static int upload_dma_data(struct soundscape *s, sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80); /* - * Upload the user's data (firmware?) to the SoundScape + * Upload the firmware to the SoundScape * board through the DMA channel ... */ while (size != 0) { unsigned long len; - /* - * Apparently, copying to/from userspace can sleep. - * We are therefore forbidden from holding any - * spinlocks while we copy ... - */ - spin_unlock_irqrestore(&s->lock, flags); - - /* - * Remember that the data that we want to DMA - * comes from USERSPACE. We have already verified - * the userspace pointer ... - */ len = min(size, dma.bytes); - len -= __copy_from_user(dma.area, data, len); + memcpy(dma.area, data, len); data += len; size -= len; - /* - * Grab that spinlock again, now that we've - * finished copying! - */ - spin_lock_irqsave(&s->lock, flags); - snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE); sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG); if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) { @@ -512,6 +489,7 @@ static int upload_dma_data(struct soundscape *s, } /* while */ set_host_mode_unsafe(s->io_base); + outb(0x0, s->io_base); /* * Boot the board ... (I think) @@ -537,7 +515,7 @@ _release_dma: /* * NOTE!!! We are NOT holding any spinlocks at this point !!! */ - sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_ODIE ? 0x70 : 0x40)); + sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70)); free_dmabuf(&dma); return ret; @@ -547,162 +525,69 @@ _release_dma: * Upload the bootblock(?) into the SoundScape. The only * purpose of this block of code seems to be to tell * us which version of the microcode we should be using. - * - * NOTE: The boot-block data resides in USER-SPACE!!! - * However, we have already verified its memory - * addresses by the time we get here. */ -static int sscape_upload_bootblock(struct soundscape *sscape, struct sscape_bootblock __user *bb) +static int sscape_upload_bootblock(struct snd_card *card) { + struct soundscape *sscape = get_card_soundscape(card); unsigned long flags; + const struct firmware *init_fw = NULL; int data = 0; int ret; - ret = upload_dma_data(sscape, bb->code, sizeof(bb->code)); - - spin_lock_irqsave(&sscape->lock, flags); - if (ret == 0) { - data = host_read_ctrl_unsafe(sscape->io_base, 100); - } - set_midi_mode_unsafe(sscape->io_base); - spin_unlock_irqrestore(&sscape->lock, flags); - - if (ret == 0) { - if (data < 0) { - snd_printk(KERN_ERR "sscape: timeout reading firmware version\n"); - ret = -EAGAIN; - } - else if (__copy_to_user(&bb->version, &data, sizeof(bb->version))) { - ret = -EFAULT; - } + ret = request_firmware(&init_fw, "scope.cod", card->dev); + if (ret < 0) { + snd_printk(KERN_ERR "Error loading scope.cod"); + return ret; } + ret = upload_dma_data(sscape, init_fw->data, init_fw->size); - return ret; -} + release_firmware(init_fw); -/* - * Upload the microcode into the SoundScape. The - * microcode is 64K of data, and if we try to copy - * it into a local variable then we will SMASH THE - * KERNEL'S STACK! We therefore leave it in USER - * SPACE, and save ourselves from copying it at all. - */ -static int sscape_upload_microcode(struct soundscape *sscape, - const struct sscape_microcode __user *mc) -{ - unsigned long flags; - char __user *code; - int err; - - /* - * We are going to have to copy this data into a special - * DMA-able buffer before we can upload it. We shall therefore - * just check that the data pointer is valid for now. - * - * NOTE: This buffer is 64K long! That's WAY too big to - * copy into a stack-temporary anyway. - */ - if ( get_user(code, &mc->code) || - !access_ok(VERIFY_READ, code, SSCAPE_MICROCODE_SIZE) ) - return -EFAULT; + spin_lock_irqsave(&sscape->lock, flags); + if (ret == 0) + data = host_read_ctrl_unsafe(sscape->io_base, 100); - if ((err = upload_dma_data(sscape, code, SSCAPE_MICROCODE_SIZE)) == 0) { - snd_printk(KERN_INFO "sscape: MIDI firmware loaded\n"); - } + if (data & 0x10) + sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f); - spin_lock_irqsave(&sscape->lock, flags); - set_midi_mode_unsafe(sscape->io_base); spin_unlock_irqrestore(&sscape->lock, flags); - initialise_mpu401(sscape->mpu); + data &= 0xf; + if (ret == 0 && data > 7) { + snd_printk(KERN_ERR "timeout reading firmware version\n"); + ret = -EAGAIN; + } - return err; + return (ret == 0) ? data : ret; } /* - * Hardware-specific device functions, to implement special - * IOCTLs for the SoundScape card. This is how we upload - * the microcode into the card, for example, and so we - * must ensure that no two processes can open this device - * simultaneously, and that we can't open it at all if - * someone is using the MIDI device. + * Upload the microcode into the SoundScape. */ -static int sscape_hw_open(struct snd_hwdep * hw, struct file *file) +static int sscape_upload_microcode(struct snd_card *card, int version) { - register struct soundscape *sscape = get_hwdep_soundscape(hw); - unsigned long flags; + struct soundscape *sscape = get_card_soundscape(card); + const struct firmware *init_fw = NULL; + char name[14]; int err; - spin_lock_irqsave(&sscape->fwlock, flags); + snprintf(name, sizeof(name), "sndscape.co%d", version); - if ((sscape->midi_usage != 0) || sscape->hw_in_use) { - err = -EBUSY; - } else { - sscape->hw_in_use = 1; - err = 0; + err = request_firmware(&init_fw, name, card->dev); + if (err < 0) { + snd_printk(KERN_ERR "Error loading sndscape.co%d", version); + return err; } + err = upload_dma_data(sscape, init_fw->data, init_fw->size); + if (err == 0) + snd_printk(KERN_INFO "MIDI firmware loaded %d KBs\n", + init_fw->size >> 10); - spin_unlock_irqrestore(&sscape->fwlock, flags); - return err; -} - -static int sscape_hw_release(struct snd_hwdep * hw, struct file *file) -{ - register struct soundscape *sscape = get_hwdep_soundscape(hw); - unsigned long flags; - - spin_lock_irqsave(&sscape->fwlock, flags); - sscape->hw_in_use = 0; - spin_unlock_irqrestore(&sscape->fwlock, flags); - return 0; -} - -static int sscape_hw_ioctl(struct snd_hwdep * hw, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct soundscape *sscape = get_hwdep_soundscape(hw); - int err = -EBUSY; - - switch (cmd) { - case SND_SSCAPE_LOAD_BOOTB: - { - register struct sscape_bootblock __user *bb = (struct sscape_bootblock __user *) arg; - - /* - * We are going to have to copy this data into a special - * DMA-able buffer before we can upload it. We shall therefore - * just check that the data pointer is valid for now ... - */ - if ( !access_ok(VERIFY_READ, bb->code, sizeof(bb->code)) ) - return -EFAULT; - - /* - * Now check that we can write the firmware version number too... - */ - if ( !access_ok(VERIFY_WRITE, &bb->version, sizeof(bb->version)) ) - return -EFAULT; - - err = sscape_upload_bootblock(sscape, bb); - } - break; - - case SND_SSCAPE_LOAD_MCODE: - { - register const struct sscape_microcode __user *mc = (const struct sscape_microcode __user *) arg; - - err = sscape_upload_microcode(sscape, mc); - } - break; - - default: - err = -EINVAL; - break; - } /* switch */ + release_firmware(init_fw); return err; } - /* * Mixer control for the SoundScape's MIDI device. */ @@ -920,7 +805,7 @@ static int mpu401_open(struct snd_mpu401 * mpu) spin_lock_irqsave(&sscape->fwlock, flags); - if (sscape->hw_in_use || (sscape->midi_usage == ULONG_MAX)) { + if (sscape->midi_usage == ULONG_MAX) { err = -EBUSY; } else { ++(sscape->midi_usage); @@ -1053,13 +938,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, } } - strcpy(card->driver, "SoundScape"); - strcpy(card->shortname, pcm->name); - snprintf(card->longname, sizeof(card->longname), - "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n", - pcm->name, chip->port, chip->irq, - chip->dma1, chip->dma2); - sscape->chip = chip; } @@ -1162,29 +1040,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) return -ENXIO; } - if (sscape->type != SSCAPE_VIVO) { - /* - * Now create the hardware-specific device so that we can - * load the microcode into the on-board processor. - * We cannot use the MPU-401 MIDI system until this firmware - * has been loaded into the card. - */ - err = snd_hwdep_new(card, "MC68EC000", 0, &(sscape->hw)); - if (err < 0) { - printk(KERN_ERR "sscape: Failed to create " - "firmware device\n"); - goto _release_dma; - } - strlcpy(sscape->hw->name, "SoundScape M68K", - sizeof(sscape->hw->name)); - sscape->hw->name[sizeof(sscape->hw->name) - 1] = '\0'; - sscape->hw->iface = SNDRV_HWDEP_IFACE_SSCAPE; - sscape->hw->ops.open = sscape_hw_open; - sscape->hw->ops.release = sscape_hw_release; - sscape->hw->ops.ioctl = sscape_hw_ioctl; - sscape->hw->private_data = sscape; - } - /* * Tell the on-board devices where their resources are (I think - * I can't be sure without a datasheet ... So many magic values!) @@ -1222,28 +1077,56 @@ static int __devinit create_sscape(int dev, struct snd_card *card) wss_port[dev], irq[dev]); goto _release_dma; } + strcpy(card->driver, "SoundScape"); + strcpy(card->shortname, name); + snprintf(card->longname, sizeof(card->longname), + "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n", + name, sscape->chip->port, sscape->chip->irq, + sscape->chip->dma1, sscape->chip->dma2); + #define MIDI_DEVNUM 0 if (sscape->type != SSCAPE_VIVO) { - err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]); - if (err < 0) { - printk(KERN_ERR "sscape: Failed to create " - "MPU-401 device at 0x%lx\n", - port[dev]); - goto _release_dma; - } + err = sscape_upload_bootblock(card); + if (err >= 0) + err = sscape_upload_microcode(card, err); - /* - * Enable the master IRQ ... - */ - sscape_write(sscape, GA_INTENA_REG, 0x80); - - /* - * Initialize mixer - */ - sscape->midi_vol = 0; - host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100); - host_write_ctrl_unsafe(sscape->io_base, 0, 100); - host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100); + if (err == 0) { + err = create_mpu401(card, MIDI_DEVNUM, port[dev], + mpu_irq[dev]); + if (err < 0) { + printk(KERN_ERR "sscape: Failed to create " + "MPU-401 device at 0x%lx\n", + port[dev]); + goto _release_dma; + } + + /* + * Enable the master IRQ ... + */ + sscape_write(sscape, GA_INTENA_REG, 0x80); + + /* + * Initialize mixer + */ + spin_lock_irqsave(&sscape->lock, flags); + sscape->midi_vol = 0; + host_write_ctrl_unsafe(sscape->io_base, + CMD_SET_MIDI_VOL, 100); + host_write_ctrl_unsafe(sscape->io_base, + sscape->midi_vol, 100); + host_write_ctrl_unsafe(sscape->io_base, + CMD_XXX_MIDI_VOL, 100); + host_write_ctrl_unsafe(sscape->io_base, + sscape->midi_vol, 100); + host_write_ctrl_unsafe(sscape->io_base, + CMD_SET_EXTMIDI, 100); + host_write_ctrl_unsafe(sscape->io_base, + 0, 100); + host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100); + + set_midi_mode_unsafe(sscape->io_base); + spin_unlock_irqrestore(&sscape->lock, flags); + } } /* @@ -1301,11 +1184,12 @@ static int __devinit snd_sscape_probe(struct device *pdev, unsigned int dev) sscape->type = SSCAPE; dma[dev] &= 0x03; + snd_card_set_dev(card, pdev); + ret = create_sscape(dev, card); if (ret < 0) goto _release_card; - snd_card_set_dev(card, pdev); if ((ret = snd_card_register(card)) < 0) { printk(KERN_ERR "sscape: Failed to register sound card\n"); goto _release_card; @@ -1426,12 +1310,12 @@ static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard, wss_port[idx] = pnp_port_start(dev, 1); dma2[idx] = pnp_dma(dev, 1); } + snd_card_set_dev(card, &pcard->card->dev); ret = create_sscape(idx, card); if (ret < 0) goto _release_card; - snd_card_set_dev(card, &pcard->card->dev); if ((ret = snd_card_register(card)) < 0) { printk(KERN_ERR "sscape: Failed to register sound card\n"); goto _release_card; -- 1.6.0.3 ---------------------------------------------------------------------- Nie dla nich ciepla praca za biurkiem. Sprawdz >>> http://link.interia.pl/f2383

2 1

[alsa-devel] [PATCH] ASoC: DaVinci: McASP FIFO related updates
by Chaithrika U S 01 Oct '09

01 Oct '09

The DMA params for McASP with FIFO has been updated so that it works for various FIFO levels. A member- 'fifo_level' has been added to the DMA params data structure. The fifo_level can be adjusted by the tx[rx]_numevt platform data. This is relevant only for DA8xx/OMAP-L1xx platforms. This implementation has been tested for numevt values 1, 2, 4, 8. Signed-off-by: Chaithrika U S <chaithrika(a)ti.com> --- Applies to ALSA GIT tree on branch topic/asoc at http://git.kernel.org/?p=linux/kernel/git/tiwai/sound-2.6.git;a=shortlog; h=topic/asoc sound/soc/davinci/davinci-i2s.c | 2 ++ sound/soc/davinci/davinci-mcasp.c | 17 +++++++---------- sound/soc/davinci/davinci-pcm.c | 21 ++++++++++++++++++--- sound/soc/davinci/davinci-pcm.h | 1 + 4 files changed, 28 insertions(+), 13 deletions(-) diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c index 4ae7070..2ab8093 100644 --- a/sound/soc/davinci/davinci-i2s.c +++ b/sound/soc/davinci/davinci-i2s.c @@ -397,6 +397,8 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream, } dma_params->acnt = dma_params->data_type; + dma_params->fifo_level = 0; + rcr |= DAVINCI_MCBSP_RCR_RFRLEN1(1); xcr |= DAVINCI_MCBSP_XCR_XFRLEN1(1); diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 5d1f98a..50ad051 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -714,16 +714,13 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream, struct davinci_pcm_dma_params *dma_params = &dev->dma_params[substream->stream]; int word_length; - u8 numevt; + u8 fifo_level; davinci_hw_common_param(dev, substream->stream); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - numevt = dev->txnumevt; + fifo_level = dev->txnumevt; else - numevt = dev->rxnumevt; - - if (!numevt) - numevt = 1; + fifo_level = dev->rxnumevt; if (dev->op_mode == DAVINCI_MCASP_DIT_MODE) davinci_hw_dit_param(dev); @@ -751,12 +748,12 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - if (dev->version == MCASP_VERSION_2) { - dma_params->data_type *= numevt; - dma_params->acnt = 4 * numevt; - } else + if (dev->version == MCASP_VERSION_2 && !fifo_level) + dma_params->acnt = 4; + else dma_params->acnt = dma_params->data_type; + dma_params->fifo_level = fifo_level; davinci_config_channel_size(dev, word_length); return 0; diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c index 359e99e..1152d8b 100644 --- a/sound/soc/davinci/davinci-pcm.c +++ b/sound/soc/davinci/davinci-pcm.c @@ -66,38 +66,53 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream) dma_addr_t dma_pos; dma_addr_t src, dst; unsigned short src_bidx, dst_bidx; + unsigned short src_cidx, dst_cidx; unsigned int data_type; unsigned short acnt; unsigned int count; + unsigned int fifo_level; period_size = snd_pcm_lib_period_bytes(substream); dma_offset = prtd->period * period_size; dma_pos = runtime->dma_addr + dma_offset; + fifo_level = prtd->params->fifo_level; pr_debug("davinci_pcm: audio_set_dma_params_play channel = %d " "dma_ptr = %x period_size=%x\n", lch, dma_pos, period_size); data_type = prtd->params->data_type; count = period_size / data_type; + if (fifo_level) + count /= fifo_level; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { src = dma_pos; dst = prtd->params->dma_addr; src_bidx = data_type; dst_bidx = 0; + src_cidx = data_type * fifo_level; + dst_cidx = 0; } else { src = prtd->params->dma_addr; dst = dma_pos; src_bidx = 0; dst_bidx = data_type; + src_cidx = 0; + dst_cidx = data_type * fifo_level; } acnt = prtd->params->acnt; edma_set_src(lch, src, INCR, W8BIT); edma_set_dest(lch, dst, INCR, W8BIT); - edma_set_src_index(lch, src_bidx, 0); - edma_set_dest_index(lch, dst_bidx, 0); - edma_set_transfer_params(lch, acnt, count, 1, 0, ASYNC); + + edma_set_src_index(lch, src_bidx, src_cidx); + edma_set_dest_index(lch, dst_bidx, dst_cidx); + + if (!fifo_level) + edma_set_transfer_params(lch, acnt, count, 1, 0, ASYNC); + else + edma_set_transfer_params(lch, acnt, fifo_level, count, + fifo_level, ABSYNC); prtd->period++; if (unlikely(prtd->period >= runtime->periods)) diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h index 8746606..c8b0d2b 100644 --- a/sound/soc/davinci/davinci-pcm.h +++ b/sound/soc/davinci/davinci-pcm.h @@ -23,6 +23,7 @@ struct davinci_pcm_dma_params { enum dma_event_q eventq_no; /* event queue number */ unsigned char data_type; /* xfer data type */ unsigned char convert_mono_stereo; + unsigned int fifo_level; }; -- 1.5.6

3 3

[alsa-devel] ALC268 - Acer Aspire 5720 - mic source switch disappered
by Maxim Levitsky 30 Sep '09

30 Sep '09

Hi, I have installed 2.6.32-rc1 (well -rc2...) And I notice that 'Input source' is missing. /proc/asound/Intel/codec#0 attached. Best regards, Maxim Levitsky

2 7