- Alsa-devel - mailman.alsa-project.org

[alsa-devel] testing mic-in for tlv320aic33
by vivek kaushik 03 Dec '09

03 Dec '09

Hi All, I am testing MIC IN on tlv320aic33. but getting the following error: arecord: pcm_read:1338: read error: Input/output error On my custom board tlv320aic33 is connected mcbsp-1 of omap3530, i am configuring tlv as mater and omap3530 as slave.aplay is working fine for me but getting the above error in case of arecord. I am testing MIC IN with following command arecord -fdat record.wav when i probe signals I am getting proper MCLK, WCLK(48khz) and BCLK(1.5Mhz) but there is no toggling on data line. would be grateful to any help Thanks in advance Cheers Vivek

2 4

[alsa-devel] hw_ptr accuracy with intel8x0 -> PulseAudio issue
by pl bossart 03 Dec '09

03 Dec '09

Hi, I have been having issues for a while now with PulseAudio running on an older Thinkpad X41. PulseAudio relies on snd_pcm_avail() to detect underflows and increases the timer watermark when they happen. There are actually no audible underflows though... So I instrumented both PulseAudio (enabling DEBUG_TIMING in the alsa-sink.c code) and the kernel (latest alsa-kernel git) by adding the following printk in pcm.h: static inline snd_pcm_uframes_t snd_pcm_playback_avail(struct snd_pcm_runtime *runtime) { snd_pcm_sframes_t avail = runtime->status->hw_ptr + runtime->buffer_size - runtime->control->appl_ptr; if (avail < 0) avail += runtime->boundary; else if ((snd_pcm_uframes_t) avail >= runtime->boundary) avail -= runtime->boundary; //plb if(avail > runtime->buffer_size) { snd_printk(KERN_ERR "avail %d hw_ptr %d buffer %d appl_ptr %d \n", avail, runtime->status->hw_ptr, runtime->buffer_size, runtime->control->appl_ptr); } return avail; } In my tests this error condition where avail is larger than the ring buffer happens fairly often. The dmesg log show messages such as [ 834.524479] ALSA include/sound/pcm.h:600: avail 16403 hw_ptr 24351 buffer 16384 appl_ptr 24332 [ 835.266937] ALSA include/sound/pcm.h:600: avail 16407 hw_ptr 55841 buffer 16384 appl_ptr 55818 and these messages are correlated with the times when PulseAudio detects underflows. The full log can be found at http://pastebin.com/f210aa108. I believe the issue is the accuracy of the hw_ptr reported by snd_intel8x0_pcm_pointer. If indeed such a condition occurred, it should be flagged as underflow, shouldn't it? There's been some changes in this part of the code to avoid extremely large values, here the issue seems more subtle, the pointer is only slightly off in most cases. This does screw-up PulseAudio though, the timer watermark keeps increasing and low-latency isn't possible. I'd be more than happy to run more experiments, however I have no idea what the hardware does to report the position of the hw pointer. Thanks for your feedback - Pierre

2 1

[alsa-devel] [PATCH] opti9xx: remove snd_opti9xx fields
by Krzysztof Helt 02 Dec '09

02 Dec '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Remove snd_opti9xx fields which are indirect arguments to the snd_opti9xx_configure(). Pass these values as function arguments. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- This patch prepares a driver for a better fix to the irq problem. sound/isa/opti9xx/opti92x-ad1848.c | 110 ++++++++++++++---------------------- 1 files changed, 43 insertions(+), 67 deletions(-) diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 5cd5553..d08c389 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -141,15 +141,7 @@ struct snd_opti9xx { spinlock_t lock; - long wss_base; int irq; - int dma1; - int dma2; - - long fm_port; - - long mpu_port; - int mpu_irq; #ifdef CONFIG_PNP struct pnp_dev *dev; @@ -216,13 +208,7 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip, spin_lock_init(&chip->lock); - chip->wss_base = -1; chip->irq = -1; - chip->dma1 = -1; - chip->dma2 = -1; - chip->fm_port = -1; - chip->mpu_port = -1; - chip->mpu_irq = -1; switch (hardware) { #ifndef OPTi93X @@ -348,7 +334,10 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg, (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask))) -static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) +static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip, + long wss_base, + int irq, int dma1, int dma2, + long mpu_port, int mpu_irq) { unsigned char wss_base_bits; unsigned char irq_bits; @@ -416,7 +405,7 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) return -EINVAL; } - switch (chip->wss_base) { + switch (wss_base) { case 0x530: wss_base_bits = 0x00; break; @@ -430,14 +419,13 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) wss_base_bits = 0x02; break; default: - snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", - chip->wss_base); + snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base); goto __skip_base; } snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30); __skip_base: - switch (chip->irq) { + switch (irq) { //#ifdef OPTi93X case 5: irq_bits = 0x05; @@ -456,11 +444,11 @@ __skip_base: irq_bits = 0x04; break; default: - snd_printk(KERN_WARNING "WSS irq # %d not valid\n", chip->irq); + snd_printk(KERN_WARNING "WSS irq # %d not valid\n", irq); goto __skip_resources; } - switch (chip->dma1) { + switch (dma1) { case 0: dma_bits = 0x01; break; @@ -471,38 +459,36 @@ __skip_base: dma_bits = 0x03; break; default: - snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n", - chip->dma1); + snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n", dma1); goto __skip_resources; } #if defined(CS4231) || defined(OPTi93X) - if (chip->dma1 == chip->dma2) { + if (dma1 == dma2) { snd_printk(KERN_ERR "don't want to share dmas\n"); return -EBUSY; } - switch (chip->dma2) { + switch (dma2) { case 0: case 1: break; default: - snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n", - chip->dma2); + snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n", dma2); goto __skip_resources; } dma_bits |= 0x04; #endif /* CS4231 || OPTi93X */ #ifndef OPTi93X - outb(irq_bits << 3 | dma_bits, chip->wss_base); + outb(irq_bits << 3 | dma_bits, wss_base); #else /* OPTi93X */ snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits)); #endif /* OPTi93X */ __skip_resources: if (chip->hardware > OPTi9XX_HW_82C928) { - switch (chip->mpu_port) { + switch (mpu_port) { case 0: case -1: break; @@ -520,12 +506,11 @@ __skip_resources: break; default: snd_printk(KERN_WARNING - "MPU-401 port 0x%lx not valid\n", - chip->mpu_port); + "MPU-401 port 0x%lx not valid\n", mpu_port); goto __skip_mpu; } - switch (chip->mpu_irq) { + switch (mpu_irq) { case 5: mpu_irq_bits = 0x02; break; @@ -540,12 +525,12 @@ __skip_resources: break; default: snd_printk(KERN_WARNING "MPU-401 irq # %d not valid\n", - chip->mpu_irq); + mpu_irq); goto __skip_mpu; } snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), - (chip->mpu_port <= 0) ? 0x00 : + (mpu_port <= 0) ? 0x00 : 0x80 | mpu_port_bits << 5 | mpu_irq_bits << 3, 0xf8); } @@ -701,6 +686,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) { static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1}; int error; + int xdma2; struct snd_opti9xx *chip = card->private_data; struct snd_wss *codec; #ifdef CS4231 @@ -715,31 +701,25 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) "OPTi9xx MC")) == NULL) return -ENOMEM; - chip->wss_base = port; - chip->fm_port = fm_port; - chip->mpu_port = mpu_port; - chip->irq = irq; - chip->mpu_irq = mpu_irq; - chip->dma1 = dma1; #if defined(CS4231) || defined(OPTi93X) - chip->dma2 = dma2; + xdma2 = dma2; #else - chip->dma2 = -1; + xdma2 = -1; #endif - if (chip->wss_base == SNDRV_AUTO_PORT) { - chip->wss_base = snd_legacy_find_free_ioport(possible_ports, 4); - if (chip->wss_base < 0) { + if (port == SNDRV_AUTO_PORT) { + port = snd_legacy_find_free_ioport(possible_ports, 4); + if (port < 0) { snd_printk(KERN_ERR "unable to find a free WSS port\n"); return -EBUSY; } } - error = snd_opti9xx_configure(chip); + error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2, + mpu_port, mpu_irq); if (error) return error; - error = snd_wss_create(card, chip->wss_base + 4, -1, - chip->irq, chip->dma1, chip->dma2, + error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2, #ifdef OPTi93X WSS_HW_OPTI93X, WSS_HWSHARE_IRQ, #else @@ -763,35 +743,35 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) return error; #endif #ifdef OPTi93X - error = request_irq(chip->irq, snd_opti93x_interrupt, + error = request_irq(irq, snd_opti93x_interrupt, IRQF_DISABLED, DEV_NAME" - WSS", codec); if (error < 0) { snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq); return error; } #endif + chip->irq = irq; strcpy(card->driver, chip->name); sprintf(card->shortname, "OPTi %s", card->driver); #if defined(CS4231) || defined(OPTi93X) sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d", - card->shortname, pcm->name, chip->wss_base + 4, - chip->irq, chip->dma1, chip->dma2); + card->shortname, pcm->name, port + 4, irq, dma1, xdma2); #else sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d", - card->shortname, pcm->name, chip->wss_base + 4, - chip->irq, chip->dma1); + card->shortname, pcm->name, port + 4, irq, dma1); #endif /* CS4231 || OPTi93X */ - if (chip->mpu_port <= 0 || chip->mpu_port == SNDRV_AUTO_PORT) + if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT) rmidi = NULL; - else - if ((error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, - chip->mpu_port, 0, chip->mpu_irq, IRQF_DISABLED, - &rmidi))) + else { + error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, + mpu_port, 0, mpu_irq, IRQF_DISABLED, &rmidi); + if (error) snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n", - chip->mpu_port); + mpu_port); + } - if (chip->fm_port > 0 && chip->fm_port != SNDRV_AUTO_PORT) { + if (fm_port > 0 && fm_port != SNDRV_AUTO_PORT) { struct snd_opl3 *opl3 = NULL; #ifndef OPTi93X if (chip->hardware == OPTi9XX_HW_82C928 || @@ -801,9 +781,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) /* assume we have an OPL4 */ snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); - if (snd_opl4_create(card, - chip->fm_port, - chip->fm_port - 8, + if (snd_opl4_create(card, fm_port, fm_port - 8, 2, &opl3, &opl4) < 0) { /* no luck, use OPL3 instead */ snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), @@ -811,12 +789,10 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) } } #endif /* !OPTi93X */ - if (!opl3 && snd_opl3_create(card, - chip->fm_port, - chip->fm_port + 2, + if (!opl3 && snd_opl3_create(card, fm_port, fm_port + 2, OPL3_HW_AUTO, 0, &opl3) < 0) { snd_printk(KERN_WARNING "no OPL device at 0x%lx-0x%lx\n", - chip->fm_port, chip->fm_port + 4 - 1); + fm_port, fm_port + 4 - 1); } if (opl3) { error = snd_opl3_hwdep_new(opl3, 0, 1, &synth); -- 1.6.4 ---------------------------------------------------------------------- Pobierz i graj w swoim telefonie. Sprawdz >>> http://link.interia.pl/f24c1

2 1

[alsa-devel] [PATCH]PM_QOS-to-use-handle-based-requests-pcm-update 5/5
by mark gross 02 Dec '09

02 Dec '09

This is the patch to update sound pcm's dependencies on the pmqos api that was changed in the first patch in this series. Updated per input from RFC. --mgross Signed-off-by: mark gross <mgross(a)linux.intel.com>

2 2

[alsa-devel] [PATCH 1/2] opti93x: fix irq releasing if the irq cannot be allocated
by Krzysztof Helt 02 Dec '09

02 Dec '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Move irq allocating earlier so the codec pointer and codec->irq are not set if the request_irq() fails. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- The third version. The irq is correctly freed if the snd_wss_create() fails (this is the only change since the previous version). sound/isa/opti9xx/opti92x-ad1848.c | 31 +++++++++++++++++++------------ 1 files changed, 19 insertions(+), 12 deletions(-) diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 5cd5553..7c97ca8 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -558,10 +558,13 @@ __skip_mpu: static irqreturn_t snd_opti93x_interrupt(int irq, void *dev_id) { - struct snd_wss *codec = dev_id; - struct snd_opti9xx *chip = codec->card->private_data; + struct snd_opti9xx *chip = dev_id; + struct snd_wss *codec = chip->codec; unsigned char status; + if (!codec) + return IRQ_HANDLED; + status = snd_opti9xx_read(chip, OPTi9XX_MC_REG(11)); if ((status & OPTi93X_IRQ_PLAYBACK) && codec->playback_substream) snd_pcm_period_elapsed(codec->playback_substream); @@ -690,7 +693,7 @@ static void snd_card_opti9xx_free(struct snd_card *card) struct snd_wss *codec = chip->codec; if (codec && codec->irq > 0) { disable_irq(codec->irq); - free_irq(codec->irq, codec); + free_irq(codec->irq, chip); } #endif release_and_free_resource(chip->res_mc_base); @@ -738,6 +741,14 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) if (error) return error; +#ifdef OPTi93X + error = request_irq(chip->irq, snd_opti93x_interrupt, + IRQF_DISABLED, DEV_NAME" - WSS", chip); + if (error < 0) { + snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq); + return error; + } +#endif error = snd_wss_create(card, chip->wss_base + 4, -1, chip->irq, chip->dma1, chip->dma2, #ifdef OPTi93X @@ -746,8 +757,12 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) WSS_HW_DETECT, 0, #endif &codec); - if (error < 0) + if (error < 0) { +#ifdef OPTi93X + free_irq(chip->irq, chip); +#endif return error; + } #ifdef OPTi93X chip->codec = codec; #endif @@ -762,14 +777,6 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) if (error < 0) return error; #endif -#ifdef OPTi93X - error = request_irq(chip->irq, snd_opti93x_interrupt, - IRQF_DISABLED, DEV_NAME" - WSS", codec); - if (error < 0) { - snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq); - return error; - } -#endif strcpy(card->driver, chip->name); sprintf(card->shortname, "OPTi %s", card->driver); #if defined(CS4231) || defined(OPTi93X) -- 1.6.4 ---------------------------------------------------------------------- Jak zrobi� swoj� w�asn� tapet� na telefon? Sprawdz >>> http://link.interia.pl/f24c3

2 1

[alsa-devel] [PATCH 2/2] opti9xx: remove snd_opti9xx fields
by Krzysztof Helt 02 Dec '09

02 Dec '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Remove snd_opti9xx fields which are indirect arguments to the snd_opti9xx_configure(). Pass these values as function arguments. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- sound/isa/opti9xx/opti92x-ad1848.c | 118 ++++++++++++++---------------------- 1 files changed, 45 insertions(+), 73 deletions(-) diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 7c97ca8..a4247f7 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -141,16 +141,6 @@ struct snd_opti9xx { spinlock_t lock; - long wss_base; - int irq; - int dma1; - int dma2; - - long fm_port; - - long mpu_port; - int mpu_irq; - #ifdef CONFIG_PNP struct pnp_dev *dev; struct pnp_dev *devmpu; @@ -216,14 +206,6 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip, spin_lock_init(&chip->lock); - chip->wss_base = -1; - chip->irq = -1; - chip->dma1 = -1; - chip->dma2 = -1; - chip->fm_port = -1; - chip->mpu_port = -1; - chip->mpu_irq = -1; - switch (hardware) { #ifndef OPTi93X case OPTi9XX_HW_82C928: @@ -348,7 +330,10 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg, (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask))) -static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) +static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip, + long wss_base, + int irq, int dma1, int dma2, + long mpu_port, int mpu_irq) { unsigned char wss_base_bits; unsigned char irq_bits; @@ -416,7 +401,7 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) return -EINVAL; } - switch (chip->wss_base) { + switch (wss_base) { case 0x530: wss_base_bits = 0x00; break; @@ -430,14 +415,13 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip) wss_base_bits = 0x02; break; default: - snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", - chip->wss_base); + snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base); goto __skip_base; } snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30); __skip_base: - switch (chip->irq) { + switch (irq) { //#ifdef OPTi93X case 5: irq_bits = 0x05; @@ -456,11 +440,11 @@ __skip_base: irq_bits = 0x04; break; default: - snd_printk(KERN_WARNING "WSS irq # %d not valid\n", chip->irq); + snd_printk(KERN_WARNING "WSS irq # %d not valid\n", irq); goto __skip_resources; } - switch (chip->dma1) { + switch (dma1) { case 0: dma_bits = 0x01; break; @@ -471,38 +455,36 @@ __skip_base: dma_bits = 0x03; break; default: - snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n", - chip->dma1); + snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n", dma1); goto __skip_resources; } #if defined(CS4231) || defined(OPTi93X) - if (chip->dma1 == chip->dma2) { + if (dma1 == dma2) { snd_printk(KERN_ERR "don't want to share dmas\n"); return -EBUSY; } - switch (chip->dma2) { + switch (dma2) { case 0: case 1: break; default: - snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n", - chip->dma2); + snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n", dma2); goto __skip_resources; } dma_bits |= 0x04; #endif /* CS4231 || OPTi93X */ #ifndef OPTi93X - outb(irq_bits << 3 | dma_bits, chip->wss_base); + outb(irq_bits << 3 | dma_bits, wss_base); #else /* OPTi93X */ snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits)); #endif /* OPTi93X */ __skip_resources: if (chip->hardware > OPTi9XX_HW_82C928) { - switch (chip->mpu_port) { + switch (mpu_port) { case 0: case -1: break; @@ -520,12 +502,11 @@ __skip_resources: break; default: snd_printk(KERN_WARNING - "MPU-401 port 0x%lx not valid\n", - chip->mpu_port); + "MPU-401 port 0x%lx not valid\n", mpu_port); goto __skip_mpu; } - switch (chip->mpu_irq) { + switch (mpu_irq) { case 5: mpu_irq_bits = 0x02; break; @@ -540,12 +521,12 @@ __skip_resources: break; default: snd_printk(KERN_WARNING "MPU-401 irq # %d not valid\n", - chip->mpu_irq); + mpu_irq); goto __skip_mpu; } snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6), - (chip->mpu_port <= 0) ? 0x00 : + (mpu_port <= 0) ? 0x00 : 0x80 | mpu_port_bits << 5 | mpu_irq_bits << 3, 0xf8); } @@ -704,6 +685,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) { static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1}; int error; + int xdma2; struct snd_opti9xx *chip = card->private_data; struct snd_wss *codec; #ifdef CS4231 @@ -718,39 +700,33 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) "OPTi9xx MC")) == NULL) return -ENOMEM; - chip->wss_base = port; - chip->fm_port = fm_port; - chip->mpu_port = mpu_port; - chip->irq = irq; - chip->mpu_irq = mpu_irq; - chip->dma1 = dma1; #if defined(CS4231) || defined(OPTi93X) - chip->dma2 = dma2; + xdma2 = dma2; #else - chip->dma2 = -1; + xdma2 = -1; #endif - if (chip->wss_base == SNDRV_AUTO_PORT) { - chip->wss_base = snd_legacy_find_free_ioport(possible_ports, 4); - if (chip->wss_base < 0) { + if (port == SNDRV_AUTO_PORT) { + port = snd_legacy_find_free_ioport(possible_ports, 4); + if (port < 0) { snd_printk(KERN_ERR "unable to find a free WSS port\n"); return -EBUSY; } } - error = snd_opti9xx_configure(chip); + error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2, + mpu_port, mpu_irq); if (error) return error; #ifdef OPTi93X - error = request_irq(chip->irq, snd_opti93x_interrupt, + error = request_irq(irq, snd_opti93x_interrupt, IRQF_DISABLED, DEV_NAME" - WSS", chip); if (error < 0) { - snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq); + snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", irq); return error; } #endif - error = snd_wss_create(card, chip->wss_base + 4, -1, - chip->irq, chip->dma1, chip->dma2, + error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2, #ifdef OPTi93X WSS_HW_OPTI93X, WSS_HWSHARE_IRQ, #else @@ -759,7 +735,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) &codec); if (error < 0) { #ifdef OPTi93X - free_irq(chip->irq, chip); + free_irq(irq, chip); #endif return error; } @@ -781,24 +757,24 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) sprintf(card->shortname, "OPTi %s", card->driver); #if defined(CS4231) || defined(OPTi93X) sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d", - card->shortname, pcm->name, chip->wss_base + 4, - chip->irq, chip->dma1, chip->dma2); + card->shortname, pcm->name, port + 4, irq, dma1, xdma2); #else sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d", - card->shortname, pcm->name, chip->wss_base + 4, - chip->irq, chip->dma1); + card->shortname, pcm->name, port + 4, irq, dma1); #endif /* CS4231 || OPTi93X */ - if (chip->mpu_port <= 0 || chip->mpu_port == SNDRV_AUTO_PORT) + if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT) rmidi = NULL; - else - if ((error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, - chip->mpu_port, 0, chip->mpu_irq, IRQF_DISABLED, - &rmidi))) + else { + error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, + mpu_port, 0, mpu_irq, IRQF_DISABLED, + &rmidi); + if (error) snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n", - chip->mpu_port); + mpu_port); + } - if (chip->fm_port > 0 && chip->fm_port != SNDRV_AUTO_PORT) { + if (fm_port > 0 && fm_port != SNDRV_AUTO_PORT) { struct snd_opl3 *opl3 = NULL; #ifndef OPTi93X if (chip->hardware == OPTi9XX_HW_82C928 || @@ -808,9 +784,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) /* assume we have an OPL4 */ snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); - if (snd_opl4_create(card, - chip->fm_port, - chip->fm_port - 8, + if (snd_opl4_create(card, fm_port, fm_port - 8, 2, &opl3, &opl4) < 0) { /* no luck, use OPL3 instead */ snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2), @@ -818,12 +792,10 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) } } #endif /* !OPTi93X */ - if (!opl3 && snd_opl3_create(card, - chip->fm_port, - chip->fm_port + 2, + if (!opl3 && snd_opl3_create(card, fm_port, fm_port + 2, OPL3_HW_AUTO, 0, &opl3) < 0) { snd_printk(KERN_WARNING "no OPL device at 0x%lx-0x%lx\n", - chip->fm_port, chip->fm_port + 4 - 1); + fm_port, fm_port + 4 - 1); } if (opl3) { error = snd_opl3_hwdep_new(opl3, 0, 1, &synth); -- 1.6.4 ---------------------------------------------------------------------- Do�aduj sw�j telefon! Sprawdz >>> http://link.interia.pl/f24c2

1 0

[alsa-devel] rewind operations in pcm_ops
by Singaravelan Nallasellan 02 Dec '09

02 Dec '09

Hi, The audio subsystem in platform has its own buffering. It could buffer upto 256KB. Our driver uses indirect callback to send the buffers and sizes to audio subsystem whenever the "ack" is called. If rewind is required during the playback, ALSA pcm native interface is not calling the driver operations for rewind. I am planning to add rewind operations to pcm_ops and make changes to pcm files. Please suggest me whether this is acceptable. Thanks -Sing

1 0

[PATCH 5/5] PM_QOS to use handle based requests pcm update
by mark gross 01 Dec '09

01 Dec '09

--- include/sound/pcm.h | 3 ++- sound/core/pcm.c | 3 --- sound/core/pcm_native.c | 14 ++++++++------ 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index de6d981..91daac3 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -29,6 +29,7 @@ #include <linux/poll.h> #include <linux/mm.h> #include <linux/bitops.h> +#include <linux/pm_qos_params.h> #define snd_pcm_substream_chip(substream) ((substream)->private_data) #define snd_pcm_chip(pcm) ((pcm)->private_data) @@ -355,7 +356,7 @@ struct snd_pcm_substream { int number; char name[32]; /* substream name */ int stream; /* stream (direction) */ - char latency_id[20]; /* latency identifier */ + struct pm_qos_request_list *latency_pm_qos_req; /* pm_qos latency request */ size_t buffer_bytes_max; /* limit ring buffer size */ struct snd_dma_buffer dma_buffer; unsigned int dma_buf_id; diff --git a/sound/core/pcm.c b/sound/core/pcm.c index c69c60b..6faf4b5 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -647,9 +647,6 @@ int snd_pcm_new_stream(struct snd_pcm *pcm, int stream, int substream_count) substream->number = idx; substream->stream = stream; sprintf(substream->name, "subdevice #%i", idx); - snprintf(substream->latency_id, sizeof(substream->latency_id), - "ALSA-PCM%d-%d%c%d", pcm->card->number, pcm->device, - (stream ? 'c' : 'p'), idx); substream->buffer_bytes_max = UINT_MAX; if (prev == NULL) pstr->substream = substream; diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index ab73edf..2aab6cf 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -447,11 +447,13 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream, snd_pcm_timer_resolution_change(substream); runtime->status->state = SNDRV_PCM_STATE_SETUP; - pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, - substream->latency_id); + if (substream->latency_pm_qos_req) { + pm_qos_remove_request(substream->latency_pm_qos_req); + substream->latency_pm_qos_req = NULL; + } if ((usecs = period_to_usecs(runtime)) >= 0) - pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, - substream->latency_id, usecs); + substream->latency_pm_qos_req = pm_qos_add_request( + PM_QOS_CPU_DMA_LATENCY, usecs); return 0; _error: /* hardware might be unuseable from this time, @@ -506,8 +508,8 @@ static int snd_pcm_hw_free(struct snd_pcm_substream *substream) if (substream->ops->hw_free) result = substream->ops->hw_free(substream); runtime->status->state = SNDRV_PCM_STATE_OPEN; - pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, - substream->latency_id); + pm_qos_remove_request(substream->latency_pm_qos_req); + substream->latency_pm_qos_req = NULL; return result; } -- 1.6.3.3

1 0

[alsa-devel] [PATCH] Fix mixer map for Hercules Gamesurround Muse Pocket LT
by Alexey Fisher 01 Dec '09

01 Dec '09

Muse Pocket use brocken mixer names, so alsamixer and PA can't use it correctly This patch add quirk to overwirte default mixers. Signed-off-by: Alexey Fisher <bug-track(a)fisher-privat.net> modified: sound/usb/usbmixer_maps.c --- sound/usb/usbmixer_maps.c | 23 +++++++++++++++++++++++ 1 files changed, 23 insertions(+), 0 deletions(-) diff --git a/sound/usb/usbmixer_maps.c b/sound/usb/usbmixer_maps.c index 3e5d66c..77c3588 100644 --- a/sound/usb/usbmixer_maps.c +++ b/sound/usb/usbmixer_maps.c @@ -277,6 +277,22 @@ static struct usbmix_name_map scratch_live_map[] = { { 0 } /* terminator */ }; +/* "Gamesurround Muse Pocket LT" looks same like "Sound Blaster MP3+" + * most importand difference is SU[8], it should be set to "Capture Source" + * to make alsamixer and PA working properly. + * FIXME: or mp3plus_map should use "Capture Source" too, + * so this maps can be merget + */ +static struct usbmix_name_map hercules_usb51_map[] = { + { 8, "Capture Source" }, /* SU, default "PCM Capture Source" */ + { 9, "Master Playback" }, /* FU, default "Speaker Playback" */ + { 10, "Mic Boost", 7 }, /* FU, default "Auto Gain Input" */ + { 11, "Line Capture" }, /* FU, default "PCM Capture" */ + { 13, "Mic Bypass Playback" }, /* FU, default "Mic Playback" */ + { 14, "Line Bypass Playback" }, /* FU, default "Line Playback" */ + { 0 } /* terminator */ +}; + /* * Control map entries */ @@ -316,6 +332,13 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .ignore_ctl_error = 1, }, { + /* Hercules Gamesurround Muse Pocket LT + * (USB 5.1 Channel Audio Adapter) + */ + .id = USB_ID(0x06f8, 0xc000), + .map = hercules_usb51_map, + }, + { .id = USB_ID(0x08bb, 0x2702), .map = linex_map, .ignore_ctl_error = 1, -- 1.6.3.3

2 1

[alsa-devel] [PATCH 1/2] opti93x: fix irq releasing if the irq cannot be allocated
by Krzysztof Helt 01 Dec '09

01 Dec '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Fix the bug that an irq is released if the irq's allocation fails. Move irq allocation earlier so the codec->irq is not set if the request_irq() fails. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- A different approach than the previous one. sound/isa/opti9xx/opti92x-ad1848.c | 25 ++++++++++++++----------- 1 files changed, 14 insertions(+), 11 deletions(-) diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 5cd5553..fd32001 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -558,10 +558,13 @@ __skip_mpu: static irqreturn_t snd_opti93x_interrupt(int irq, void *dev_id) { - struct snd_wss *codec = dev_id; - struct snd_opti9xx *chip = codec->card->private_data; + struct snd_opti9xx *chip = dev_id; + struct snd_wss *codec = chip->codec; unsigned char status; + if (!codec) + return IRQ_HANDLED; + status = snd_opti9xx_read(chip, OPTi9XX_MC_REG(11)); if ((status & OPTi93X_IRQ_PLAYBACK) && codec->playback_substream) snd_pcm_period_elapsed(codec->playback_substream); @@ -690,7 +693,7 @@ static void snd_card_opti9xx_free(struct snd_card *card) struct snd_wss *codec = chip->codec; if (codec && codec->irq > 0) { disable_irq(codec->irq); - free_irq(codec->irq, codec); + free_irq(codec->irq, chip); } #endif release_and_free_resource(chip->res_mc_base); @@ -738,6 +741,14 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) if (error) return error; +#ifdef OPTi93X + error = request_irq(chip->irq, snd_opti93x_interrupt, + IRQF_DISABLED, DEV_NAME" - WSS", chip); + if (error < 0) { + snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq); + return error; + } +#endif error = snd_wss_create(card, chip->wss_base + 4, -1, chip->irq, chip->dma1, chip->dma2, #ifdef OPTi93X @@ -762,14 +773,6 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) if (error < 0) return error; #endif -#ifdef OPTi93X - error = request_irq(chip->irq, snd_opti93x_interrupt, - IRQF_DISABLED, DEV_NAME" - WSS", codec); - if (error < 0) { - snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq); - return error; - } -#endif strcpy(card->driver, chip->name); sprintf(card->shortname, "OPTi %s", card->driver); #if defined(CS4231) || defined(OPTi93X) -- 1.6.4 ---------------------------------------------------------------------- KONKURS! Kliknij i wygraj luksusowe auto na weekend lub jedn� z 650 innych nagr�d od L’Oreal Men Expert!! >> http://link.interia.pl/f2428

2 2