- Alsa-devel - mailman.alsa-project.org

[alsa-devel] frequency analysis with alsa and fftw
by Markus Vogl 28 Dec '09

28 Dec '09

hello, i´m absolute newbie in programming alsa, but for my school project i have to do so. my project is to analyse the mic input frequency from my asus eepc 1008ha with ubuntu 9.10 and show it in a terminal window. i would use my acoustic 6 string guitar to play in front of my netbook. i´ve testet the howto from linuxjornal.com .. http://www.linuxjournal.com/article/6735 ...but i´ve no plan to use the mic input and then analyse it with fftw. regards markus -- Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - sicherer, schneller und einfacher! http://portal.gmx.net/de/go/atbrowser

2 4

[alsa-devel] [PATCH - usb/usbaudio.c 1/1] sound/usb: Relax urb data align. restriction for HVR-950Q and HVR-850 only
by John S Gruber 28 Dec '09

28 Dec '09

Addressing audio quality problem. In sound/usb/usbaudio.c, for the Hauppage HVR-950Q only, change retire_capture_urb to copy the entire byte stream while still counting entire audio frames. urbs unaligned on channel sample boundaries are still truncated to the next lowest stride (audio slot) size to try to retain channel alignment in cases of data loss over usb. With the HVR950Q the left and right channel samples can be split between two different urbs. Throwing away extra channel samples causes a sound quality problem for stereo streams as the left and right channels are swapped repeatedly. BugLink: https://bugs.launchpad.net/ubuntu/+bug/495745 Signed-off-by: John S. Gruber <JohnSGruber(a)gmail.com> --- usb/usbaudio.c | 53 ++++++++++++++++++++++++++++++++++++++++------------- 1 files changed, 40 insertions(+), 13 deletions(-) diff --git a/usb/usbaudio.c b/usb/usbaudio.c index b074a59..d450b23 100644 --- a/usb/usbaudio.c +++ b/usb/usbaudio.c @@ -108,6 +108,7 @@ MODULE_PARM_DESC(ignore_ctl_error, #define MAX_URBS 8 #define SYNC_URBS 4 /* always four urbs for sync */ #define MAX_QUEUE 24 /* try not to exceed this queue length, in ms */ +#define ALLOW_SUBSLOT_BOUNDARIES 0x01 /* quirk */ struct audioformat { struct list_head list; @@ -127,6 +128,7 @@ struct audioformat { unsigned int rate_min, rate_max; /* min/max rates */ unsigned int nr_rates; /* number of rate table entries */ unsigned int *rate_table; /* rate table */ + unsigned int txfr_quirks; /* transfer quirks */ }; struct snd_usb_substream; @@ -175,6 +177,8 @@ struct snd_usb_substream { unsigned int running: 1; /* running status */ unsigned int hwptr_done; /* processed frame position in the buffer */ + unsigned int byteptr; /* position, in bytes, of next move */ + unsigned int txfr_quirks; /* substream transfer quirks */ unsigned int transfer_done; /* processed frames since last period update */ unsigned long active_mask; /* bitmask of active urbs */ unsigned long unlink_mask; /* bitmask of unlinked urbs */ @@ -343,7 +347,7 @@ static int retire_capture_urb(struct snd_usb_substream *subs, unsigned long flags; unsigned char *cp; int i; - unsigned int stride, len, oldptr; + unsigned int stride, len, bytelen, oldbyteptr; int period_elapsed = 0; stride = runtime->frame_bits >> 3; @@ -354,29 +358,39 @@ static int retire_capture_urb(struct snd_usb_substream *subs, snd_printd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status); // continue; } - len = urb->iso_frame_desc[i].actual_length / stride; - if (! len) + bytelen = (urb->iso_frame_desc[i].actual_length); + if (!bytelen) continue; + if (bytelen%(runtime->sample_bits>>3) != 0) { + int oldbytelen = bytelen; + bytelen = ((bytelen/stride)*stride); + snd_printd(KERN_ERR "Corrected urb data len. %d->%d\n", + oldbytelen, bytelen); + } + if (!(subs->txfr_quirks & ALLOW_SUBSLOT_BOUNDARIES)) + bytelen = (bytelen/stride)*stride; /* update the current pointer */ spin_lock_irqsave(&subs->lock, flags); - oldptr = subs->hwptr_done; - subs->hwptr_done += len; - if (subs->hwptr_done >= runtime->buffer_size) - subs->hwptr_done -= runtime->buffer_size; + len = (bytelen + (subs->byteptr % stride)) / stride; subs->transfer_done += len; if (subs->transfer_done >= runtime->period_size) { subs->transfer_done -= runtime->period_size; period_elapsed = 1; } + oldbyteptr = subs->byteptr; + subs->byteptr += bytelen; + if (subs->byteptr >= runtime->buffer_size*stride) + subs->byteptr -= runtime->buffer_size*stride; + subs->hwptr_done = subs->byteptr/stride; spin_unlock_irqrestore(&subs->lock, flags); /* copy a data chunk */ - if (oldptr + len > runtime->buffer_size) { - unsigned int cnt = runtime->buffer_size - oldptr; - unsigned int blen = cnt * stride; - memcpy(runtime->dma_area + oldptr * stride, cp, blen); - memcpy(runtime->dma_area, cp + blen, len * stride - blen); + if ((oldbyteptr + bytelen) > (runtime->buffer_size*stride)) { + unsigned int blen; + blen = (runtime->buffer_size*stride) - oldbyteptr; + memcpy(runtime->dma_area + oldbyteptr, cp, blen); + memcpy(runtime->dma_area, cp + blen, bytelen - blen); } else { - memcpy(runtime->dma_area + oldptr * stride, cp, len * stride); + memcpy(runtime->dma_area + oldbyteptr, cp, bytelen); } } if (period_elapsed) @@ -1363,6 +1377,7 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) subs->syncpipe = subs->syncinterval = 0; subs->maxpacksize = fmt->maxpacksize; subs->fill_max = 0; + subs->txfr_quirks = fmt->txfr_quirks; /* we need a sync pipe in async OUT or adaptive IN mode */ /* check the number of EP, since some devices have broken @@ -1532,6 +1547,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) /* reset the pointer */ subs->hwptr_done = 0; subs->transfer_done = 0; + subs->byteptr = 0; subs->phase = 0; runtime->delay = 0; @@ -2776,6 +2792,7 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1) * (fp->maxpacksize & 0x7ff); fp->attributes = csep ? csep[3] : 0; + fp->txfr_quirks = 0; /* some quirks for attributes here */ @@ -2804,6 +2821,16 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) else fp->ep_attr |= EP_ATTR_SYNC; break; + case USB_ID(0x2040, 0x7200): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7221): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7222): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7223): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7224): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7225): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7230): /* Hauppage hvr850 */ + case USB_ID(0x2040, 0x7250): /* Hauppage hvr950Q */ + fp->txfr_quirks |= ALLOW_SUBSLOT_BOUNDARIES; + break; } /* ok, let's parse further... */ -- 1.6.3.3 I'm new to changing the kernel. Normally the driver should transfer only whole audio frames, disregarding fragments, in order to keep channel and sample synchronization in the face of data loss on the bus. That's how the current driver works. The patch relaxes this (only) for devices with the quirk. An earlier version of this patch was posted recently to the linux-media list. No one there suggested a way to make the au0828 chip in this equipment behave better. They kindly forwarded me to this mailing list for review and consideration of the patch. To test the patch with a non-quirk device run it on a busy or problematic bus and listen for audio switching channels. To test with a HVR-950Q use composite input and disconnect either the left or right channel. Without the patch the audio will alternate between channels quickly, most easily heard with headphones or earphones, producing a flutter sound, With the patch the remaining test audio channel appears only on one channel and is steady.

5 8

[alsa-devel] [PATCH] ALSA: test off by one in setsamplerate()
by Roel Kluin 28 Dec '09

28 Dec '09

With `while (i++ < MAX_WRITE_RETRY)' i reaches MAX_WRITE_RETRY + 1 after the loop Signed-off-by: Roel Kluin <roel.kluin(a)gmail.com> --- sound/pci/riptide/riptide.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index b5ca02e..e66ef2b 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -1058,7 +1058,7 @@ setsamplerate(struct cmdif *cif, unsigned char *intdec, unsigned int rate) rptr.retwords[2] != M && rptr.retwords[3] != N && i++ < MAX_WRITE_RETRY); - if (i == MAX_WRITE_RETRY) { + if (i > MAX_WRITE_RETRY) { snd_printdd("sent samplerate %d: %d failed\n", *intdec, rate); return -EIO;

2 1

[alsa-devel] [PATCH] ALSA: atiixp: Specify codec for Foxconn RC4107MA-RS2
by Daniel Chen 28 Dec '09

28 Dec '09

Hi, Attached is a patch against sound-2.6.git and also targeted for stable to make sound audible by default for this mainboard. Thanks, Dan

2 1

[alsa-devel] [PATCH 1/1] Added functionality for E-mu 0404USB/0202USB/TrackerPre
by Zerg Cannibal 28 Dec '09

28 Dec '09

Added functionality: 1) Extension Units support (all XU settings now available at alsamixer, kmix, etc): - "AnalogueIn soft limiter" switch; - "Sample rate" selector (values 0,1,2,3,4,5 corresponds to 44.1 48 ... 192 kHz); - "DigitalIn CLK source" selector (internal/external) (**); - "DigitalOut format SPDIF/AC3" switch (**); (**)E-mu-0404usb only. 2) Automatic device sample rate adjustment depending on substream samplerate for both capture and playback substream. Patch is based on Mac OS-X driver (http://sourceforge.net/projects/zaudiodrivermac/) and successfully tested by Ubuntu community users for 0404usb and 0202usb. Signed-off-by: CannibalZerg <cnb_zerg(a)yahoo.com> --- sound/usb/usbaudio.c | 44 ++++++++++++++++++++++++++++++ sound/usb/usbaudio.h | 2 + sound/usb/usbmixer.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++--- 3 files changed, 115 insertions(+), 4 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 31b63ea..d8eb029 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1271,6 +1271,42 @@ static int init_usb_sample_rate(struct usb_device *dev, int iface, } /* + * For E-Mu 0404USB/0202USB/TrackerPre sample rate should be set for device, + * not for interface. +*/ +static void set_format_emu_quirk(struct snd_usb_substream *subs, struct audioformat *fmt) +{ + unsigned char emu_samplerate_id = 0; + + /* When capture is active sample rate shouldn't be changed by playback substream*/ + if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) { + if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1) + return; + } + + switch (fmt->rate_min) { + case 48000: + emu_samplerate_id = 1; + break; + case 88200: + emu_samplerate_id = 2; + break; + case 96000: + emu_samplerate_id = 3; + break; + case 176400: + emu_samplerate_id = 4; + break; + case 192000: + emu_samplerate_id = 5; + break; + default: + emu_samplerate_id = 0; + } + snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id); +} + +/* * find a matching format and set up the interface */ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) @@ -1383,6 +1419,14 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) subs->cur_audiofmt = fmt; + switch (subs->stream->chip->usb_id) { + case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ + case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ + case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */ + set_format_emu_quirk(subs, fmt); + break; + } + #if 0 printk(KERN_DEBUG "setting done: format = %d, rate = %d..%d, channels = %d\n", diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 9826337..8558773 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -233,6 +233,8 @@ void snd_usbmidi_input_stop(struct list_head* p); void snd_usbmidi_input_start(struct list_head* p); void snd_usbmidi_disconnect(struct list_head *p); +void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, unsigned char samplerate_id); + /* * retrieve usb_interface descriptor from the host interface * (conditional for compatibility with the older API) diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index c998220..400208c 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -186,6 +186,21 @@ enum { USB_PROC_DCR_RELEASE = 6, }; +/*E-mu 0202(0404) eXtension Unit(XU) control*/ +enum { + USB_XU_CLOCK_RATE = 0xe301, + USB_XU_CLOCK_SOURCE = 0xe302, + USB_XU_DIGITAL_IO_STATUS = 0xe303, + USB_XU_DEVICE_OPTIONS = 0xe304, + USB_XU_DIRECT_MONITORING = 0xe305, + USB_XU_METERING = 0xe306 +}; +enum { + USB_XU_CLOCK_SOURCE_SELECTOR = 0x02, /* clock source*/ + USB_XU_CLOCK_RATE_SELECTOR = 0x03, /* clock rate */ + USB_XU_DIGITAL_FORMAT_SELECTOR = 0x01, /* the spdif format */ + USB_XU_SOFT_LIMIT_SELECTOR = 0x03 /* soft limiter */ +}; /* * manual mapping of mixer names @@ -1330,7 +1345,32 @@ static struct procunit_info procunits[] = { { USB_PROC_DCR, "DCR", dcr_proc_info }, { 0 }, }; - +/* + * predefined data for extension units + */ +static struct procunit_value_info clock_rate_xu_info[] = { + { USB_XU_CLOCK_RATE_SELECTOR, "Selector", USB_MIXER_U8, 0}, + { 0 } +}; +static struct procunit_value_info clock_source_xu_info[] = { + { USB_XU_CLOCK_SOURCE_SELECTOR, "External", USB_MIXER_BOOLEAN}, + { 0 } +}; +static struct procunit_value_info spdif_format_xu_info[] = { + { USB_XU_DIGITAL_FORMAT_SELECTOR, "SPDIF/AC3", USB_MIXER_BOOLEAN}, + { 0 } +}; +static struct procunit_value_info soft_limit_xu_info[] = { + { USB_XU_SOFT_LIMIT_SELECTOR, " ", USB_MIXER_BOOLEAN}, + { 0 } +}; +static struct procunit_info extunits[] = { + { USB_XU_CLOCK_RATE, "Clock rate", clock_rate_xu_info }, + { USB_XU_CLOCK_SOURCE, "DigitalIn CLK source", clock_source_xu_info }, + { USB_XU_DIGITAL_IO_STATUS, "DigitalOut format:", spdif_format_xu_info }, + { USB_XU_DEVICE_OPTIONS, "AnalogueIn Soft Limit", soft_limit_xu_info }, + { 0 } +}; /* * build a processing/extension unit */ @@ -1391,8 +1431,16 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, unsigned cval->max = dsc[15]; cval->res = 1; cval->initialized = 1; - } else - get_min_max(cval, valinfo->min_value); + } else { + if (type == USB_XU_CLOCK_RATE) { + /*E-Mu USB 0404/0202/TrackerPre samplerate control quirk*/ + cval->min = 0; + cval->max = 5; + cval->res = 1; + cval->initialized = 1; + } else + get_min_max(cval, valinfo->min_value); + } kctl = snd_ctl_new1(&mixer_procunit_ctl, cval); if (! kctl) { @@ -1433,7 +1481,7 @@ static int parse_audio_processing_unit(struct mixer_build *state, int unitid, un static int parse_audio_extension_unit(struct mixer_build *state, int unitid, unsigned char *desc) { - return build_audio_procunit(state, unitid, desc, NULL, "Extension Unit"); + return build_audio_procunit(state, unitid, desc, extunits, "Extension Unit"); } @@ -2109,6 +2157,23 @@ static int snd_xonar_u1_controls_create(struct usb_mixer_interface *mixer) return 0; } +void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, unsigned char samplerate_id) +{ + struct usb_mixer_interface *mixer; + struct list_head *p; + struct usb_mixer_elem_info *cval; + int unitid = 12; /*SampleRate ExtensionUnit ID*/ + list_for_each(p, &chip->mixer_list) { + mixer = list_entry(p, struct usb_mixer_interface, list); + cval = mixer->id_elems[unitid]; + if (cval) { + set_cur_ctl_value(cval, cval->control << 8, samplerate_id); + snd_usb_mixer_notify_id(mixer, unitid); + } + break; + } +} + int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif, int ignore_error) { -- 1.6.5.6

4 7

[alsa-devel] Use of default device with snd_pcm_link()
by Devin Heitmueller 28 Dec '09

28 Dec '09

I am working on some code which captures from one PCM device and plays to another, based off of the latency.c found in alsa-lib. I noticed something strange: The code works if I set the capture device to hw:1,0 and playback device to hw:0,0. However, if I change the playback device to "default:0", the snd_pcm_link() call fails with -ENOSYS (error 38). If I dump out the properties, I can see that the the default device *is* mapped to device 0,0, so it's not clear why the behaviour would differ. My goal was just to playback to whatever the default device is, and I was under the impression that default:0 should be equivalent to "hw:0,0". Can anyone offer any brief explanation as to why the snd_pcm_link() call would fail? Thanks in advance, Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com

2 1

[alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
by Jane Wang 28 Dec '09

28 Dec '09

McBSP fucntional clock is not disabled when suspend is triggerd which prevents PER domain entering target low-power state. To fix the problem: 1. Disable/enable McBSP functional clock for suspend/resume. 2. In addition, reconfigure McBSP, this is needed when systerm comes out of OFF state. Signed-off-by: Jane Wang <jwang(a)ti.com> --- arch/arm/plat-omap/include/mach/mcbsp.h | 2 ++ arch/arm/plat-omap/mcbsp.c | 27 +++++++++++++++++++++++++++ sound/soc/omap/omap-mcbsp.c | 14 ++++++++++++-- 3 files changed, 41 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index e0d6eca..94e1c66 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -440,6 +440,8 @@ static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } #endif int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); +void omap_mcbsp_disable_fclk(unsigned int id); +void omap_mcbsp_enable_fclk(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); void omap_mcbsp_stop(unsigned int id, int tx, int rx); void omap_mcbsp_xmit_word(unsigned int id, u32 word); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e664b91..bfe3c61 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -459,6 +459,33 @@ int omap_mcbsp_request(unsigned int id) } EXPORT_SYMBOL(omap_mcbsp_request); +void omap_mcbsp_disable_fclk(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return; + } + mcbsp = id_to_mcbsp_ptr(id); + clk_disable(mcbsp->fclk); +} +EXPORT_SYMBOL(omap_mcbsp_disable_fclk); + + +void omap_mcbsp_enable_fclk(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return; + } + mcbsp = id_to_mcbsp_ptr(id); + clk_enable(mcbsp->fclk); +} +EXPORT_SYMBOL(omap_mcbsp_enable_fclk); + void omap_mcbsp_free(unsigned int id) { struct omap_mcbsp *mcbsp; diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 45be942..e56b5ff 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -229,18 +229,28 @@ static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd, switch (cmd) { case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: mcbsp_data->active++; omap_mcbsp_start(mcbsp_data->bus_id, play, !play); break; + case SNDRV_PCM_TRIGGER_RESUME: + mcbsp_data->active++; + omap_mcbsp_enable_fclk(mcbsp_data->bus_id); + omap_mcbsp_config(mcbsp_data->bus_id, + &mcbsp_data->regs); + omap_mcbsp_start(mcbsp_data->bus_id, play, !play); + break; case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: omap_mcbsp_stop(mcbsp_data->bus_id, play, !play); mcbsp_data->active--; break; + case SNDRV_PCM_TRIGGER_SUSPEND: + omap_mcbsp_stop(mcbsp_data->bus_id, play, !play); + omap_mcbsp_disable_fclk(mcbsp_data->bus_id); + mcbsp_data->active--; + break; default: err = -EINVAL; } -- 1.5.4.3

8 15

[alsa-devel] [PATCH 3/3] ASoC: fsi: Add over/under run error settlement
by Kuninori Morimoto 28 Dec '09

28 Dec '09

Signed-off-by: Kuninori Morimoto <morimoto.kuninori(a)renesas.com> --- sound/soc/sh/fsi.c | 29 +++++++++++++++++++++++++---- 1 files changed, 25 insertions(+), 4 deletions(-) diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 099fc8c..5f9f269 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -67,6 +67,7 @@ /* DOFF_ST */ #define ERR_OVER 0x00000010 #define ERR_UNDER 0x00000001 +#define ST_ERR (ERR_OVER | ERR_UNDER) /* CLK_RST */ #define B_CLK 0x00000010 @@ -375,11 +376,12 @@ static int fsi_data_push(struct fsi_priv *fsi) { struct snd_pcm_runtime *runtime; struct snd_pcm_substream *substream = NULL; + u32 status; int send; int fifo_free; int width; u8 *start; - int i, over_period; + int i, ret, over_period; if (!fsi || !fsi->substream || @@ -435,23 +437,33 @@ static int fsi_data_push(struct fsi_priv *fsi) fsi->byte_offset += send * width; + ret = 0; + status = fsi_reg_read(fsi, DOFF_ST); + if (status & ERR_OVER) { + struct snd_soc_dai *dai = fsi_get_dai(substream); + dev_err(dai->dev, "over run error\n"); + fsi_reg_write(fsi, DOFF_ST, status & ~ST_ERR); + ret = -EIO; + } + fsi_irq_enable(fsi, 1); if (over_period) snd_pcm_period_elapsed(substream); - return 0; + return ret; } static int fsi_data_pop(struct fsi_priv *fsi) { struct snd_pcm_runtime *runtime; struct snd_pcm_substream *substream = NULL; + u32 status; int free; int fifo_fill; int width; u8 *start; - int i, over_period; + int i, ret, over_period; if (!fsi || !fsi->substream || @@ -506,12 +518,21 @@ static int fsi_data_pop(struct fsi_priv *fsi) fsi->byte_offset += fifo_fill * width; + ret = 0; + status = fsi_reg_read(fsi, DIFF_ST); + if (status & ERR_UNDER) { + struct snd_soc_dai *dai = fsi_get_dai(substream); + dev_err(dai->dev, "under run error\n"); + fsi_reg_write(fsi, DIFF_ST, status & ~ST_ERR); + ret = -EIO; + } + fsi_irq_enable(fsi, 0); if (over_period) snd_pcm_period_elapsed(substream); - return 0; + return ret; } static irqreturn_t fsi_interrupt(int irq, void *data) -- 1.6.3.3

1 0

[alsa-devel] [PATCH 2/3] ASoC: fsi: Add fsi_get_dai to get snd_soc_dai
by Kuninori Morimoto 28 Dec '09

28 Dec '09

Signed-off-by: Kuninori Morimoto <morimoto.kuninori(a)renesas.com> --- sound/soc/sh/fsi.c | 10 ++++++++-- 1 files changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 4337afc..099fc8c 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -210,11 +210,17 @@ static int fsi_is_port_a(struct fsi_priv *fsi) return fsi->master->base == fsi->base; } -static struct fsi_priv *fsi_get_priv(struct snd_pcm_substream *substream) +static struct snd_soc_dai *fsi_get_dai(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai_link *machine = rtd->dai; - struct snd_soc_dai *dai = machine->cpu_dai; + + return machine->cpu_dai; +} + +static struct fsi_priv *fsi_get_priv(struct snd_pcm_substream *substream) +{ + struct snd_soc_dai *dai = fsi_get_dai(substream); return dai->private_data; } -- 1.6.3.3

1 0

[alsa-devel] [PATCH 0/3] ASoC: fsi: Add over/under run error operatoin
by Kuninori Morimoto 28 Dec '09

28 Dec '09

Dear Mark These patches add over/under run error settlement support Kuninori Morimoto (3): ASoC: fsi: Add over_period flag to prevent the misunderstanding ASoC: fsi: Add fsi_get_dai to get snd_soc_dai ASoC: fsi: Add over/under run error settlement 1st patch modify un-understandable operation. 2nd patch add new function for 3rd patch Best regards -- Kuninori Morimoto

1 0