- Alsa-devel - mailman.alsa-project.org

ALC4080 5.1 don't work - rear speakers recognized as mic
by GitHub issues - opened 18 Feb '25

18 Feb '25

alsa-project/alsa-ucm-conf issue #510 was opened from atazx: kubuntu 24.10 MSI X870 Mag Tomahawk motherboard, with integrated ALC4080 (usb id 0db0:cd0e) I tried to install the latest version of alsa-ucm-conf (1.2.13) On this card to have 5.1 audio you have to connect the rear speakers to the front panel, in what would normally be the microphone input, in fact when I connect the speakers they are recognized as a microphone. (only with ucm-conf 1.2.13) front speaker always works rear speakers only work after rebooting from windows center speakers do not work is there a way to fix this problem? Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/510 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v1 1/3] ASoC: tas2781: Support dsp firmware Alpha and Beta seaies
by Shenghao Ding 17 Feb '25

17 Feb '25

For calibration, basic version does not contain any calibration addresses, it depends on calibration tool to convery the addresses to the driver. Since Alpha and Beta firmware, all the calibration addresses are saved into the firmware. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - update the year from 2024 to 2025. - Add dspbin_type to distinguish different dspbin types, such as TASDEV_BASIC, TASDEV_ALPHA, and TASDEV_BETA. - Add struct bulk_reg_val alp_cali_bckp to store the value of pilot tone threshold only for TASDEV_ALPHA & TASDEV_BETA firmware. - Add the declaration of (*fw_parse_fct_param_address)() to parse the addresses of calibration params. - Add the minimum version of TASDEV_ALPHA and TASDEV_BETA firmware. - Add the definition of struct fct_param_address. --- include/sound/tas2781-dsp.h | 26 +++++++++++++++++++++++--- include/sound/tas2781.h | 13 ++++++++++++- 2 files changed, 35 insertions(+), 4 deletions(-) diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index 3cda9da14f6d..77a240daaae0 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2024 Texas Instruments Incorporated +// Copyright (C) 2022 - 2025 Texas Instruments Incorporated // https://www.ti.com // // The TAS2781 driver implements a flexible and configurable @@ -30,8 +30,10 @@ #define PRE_DEVICE_C 0x12 #define PRE_DEVICE_D 0x16 -#define PPC3_VERSION 0x4100 -#define PPC3_VERSION_TAS2781 0x14600 +#define PPC3_VERSION_BASE 0x4100 +#define PPC3_VERSION_TAS2781_BASIC_MIN 0x14600 +#define PPC3_VERSION_TAS2781_ALPHA_MIN 0x4a00 +#define PPC3_VERSION_TAS2781_BETA_MIN 0x19400 #define TASDEVICE_DEVICE_SUM 8 #define TASDEVICE_CONFIG_SUM 64 @@ -106,6 +108,23 @@ struct tasdevice_calibration { struct tasdevice_data dev_data; }; +struct fct_param_address { + unsigned char thr[3]; + unsigned char thr2[3]; + unsigned char plt_flg[3]; + unsigned char sin_gn[3]; + unsigned char sin_gn2[3]; + /* real-time spk impedance */ + unsigned char r0_reg[3]; + /* check spk connection */ + unsigned char tf_reg[3]; + /* check spk resonant frequency */ + unsigned char a1_reg[3]; + unsigned char a2_reg[3]; + unsigned short size; + char *data; +}; + struct tasdevice_fw { struct tasdevice_dspfw_hdr fw_hdr; unsigned short nr_programs; @@ -114,6 +133,7 @@ struct tasdevice_fw { struct tasdevice_config *configs; unsigned short nr_calibrations; struct tasdevice_calibration *calibrations; + struct fct_param_address fct_par_addr; struct device *dev; }; diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index 0f1e585635bb..f2eda8ac66e8 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2024 Texas Instruments Incorporated +// Copyright (C) 2022 - 2025 Texas Instruments Incorporated // https://www.ti.com // // The TAS2563/TAS2781 driver implements a flexible and configurable @@ -112,6 +112,12 @@ enum audio_device { TAS2781, }; +enum dspbin_type { + TASDEV_BASIC, + TASDEV_ALPHA, + TASDEV_BETA, +}; + enum device_catlog_id { LENOVO = 0, OTHERS @@ -126,6 +132,7 @@ struct bulk_reg_val { struct tasdevice { struct bulk_reg_val *cali_data_backup; + struct bulk_reg_val alp_cali_bckp; struct tasdevice_fw *cali_data_fmw; unsigned int dev_addr; unsigned int err_code; @@ -170,6 +177,7 @@ struct tasdevice_priv { unsigned char dev_name[32]; const char *name_prefix; unsigned char ndev; + unsigned int dspbin_typ; unsigned int magic_num; unsigned int chip_id; unsigned int sysclk; @@ -195,6 +203,9 @@ struct tasdevice_priv { int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv, struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset); + int (*fw_parse_fct_param_address)(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv, struct tasdev_blk *block); -- 2.34.1

2 3

[PATCH alsa-lib] seq: Fix bogus return of snd_seq_client_info_get_ump_conversion()
by Takashi Iwai 17 Feb '25

17 Feb '25

snd_seq_client_info_get_ump_conversion() should have returned the proper bit of group_filter bit field, but it just did return midi_version field -- a stupid copy & paste error. Let's fix it. Fixes: 2aefb5c41cc0 ("seq: Add UMP support") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- src/seq/seq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/seq/seq.c b/src/seq/seq.c index d3af93f58579..38cb1afd872f 100644 --- a/src/seq/seq.c +++ b/src/seq/seq.c @@ -1870,7 +1870,7 @@ int snd_seq_client_info_get_ump_groupless_enabled(const snd_seq_client_info_t *i int snd_seq_client_info_get_ump_conversion(const snd_seq_client_info_t *info) { assert(info); - return info->midi_version; + return !(info->group_filter & SNDRV_SEQ_FILTER_NO_CONVERT); } /** -- 2.43.0

1 0

Ask snd_seq_set_client_midi_version
by Correo Alternativo 17 Feb '25

17 Feb '25

Hi, I'm trying out MIDI 2.0 and found a problem, when using snd_seq_set_client_midi_version With SND_SEQ_CLIENT_LEGACY_MIDI I get the following sequence of events when connecting a midi device (using the method snd_seq_event_input or snd_seq_ump_event_input) (timidity command:timidity --interface=A --buffer-fragments=2,8 --output-mode=s1l --sampling-freq=44100): SND_SEQ_EVENT_CLIENT_START SND_SEQ_EVENT_PORT_START SND_SEQ_EVENT_PORT_START SND_SEQ_EVENT_PORT_START SND_SEQ_EVENT_PORT_START But with SND_SEQ_CLIENT_UMP_MIDI_1_0 and SND_SEQ_CLIENT_UMP_MIDI_2_0 I don't get the SND_SEQ_EVENT_PORT_START events, I only get the following: SND_SEQ_EVENT_CLIENT_START SND_SEQ_EVENT_SYSTEM SND_SEQ_EVENT_SYSTEM SND_SEQ_EVENT_SYSTEM I don't know if I'm asking this in the right place, what mistake am I making? Just by modifying that it stops working.

3 3

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 16 Feb '25

16 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> ### Device interface The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are AES3 (S/PDIF) via coax - channels 10 and 11 are AES3 (S/PDIF) via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (output only, 12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring The device exposes all 20 channels in all three playback modes. No mixer controls are available with the current driver. ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK, ADAT Optical Interface - _ADAT OUT_: TOSLINK, ADAT Optical Interface or or S/PDIF - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) - RCA in: AES3 or S/PDIF (automatic detection) - RCA out: configurable for AES3 (_Professional_) or S/PDIF (_Consumer_) - XLR in: AES3 or S/PDIF (automatic detection) - XLR out: AES3 only ### Channel configurations The _HiFi_ use case only exposes the most common channel configurations to limit combinatorial complexity: - Analog line outputs in stereo as well as 4.0 and 5.1 surround, - analog microphone and instrument inputs in mono only, - ADAT Optical outputs and inputs in direct 8‐channel mapping, and - all other outputs and inputs in stereo. [alsa-info.txt](https://github.com/user-attachments/files/18814815/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 16 Feb '25

16 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> ### Device interface The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are AES3 (S/PDIF) via coax - channels 10 and 11 are AES3 (S/PDIF) via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (output only, 12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring The device exposes all 20 channels in all three playback modes. No mixer controls are available with the current driver. ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK, ADAT Optical Interface - _ADAT OUT_: TOSLINK, ADAT Optical Interface or or S/PDIF - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) - RCA in: AES3 or S/PDIF (automatic detection) - RCA out: configurable for AES3 (_Professional_) or S/PDIF (_Consumer_) - XLR in: AES3 or S/PDIF (automatic detection) - XLR out: AES3 only ### Channel configurations The _HiFi_ use case only exposes the most common channel configurations to limit combinatorial complexity: - Analog line outputs in stereo as well as 4.0 and 5.1 surround, - analog microphone and instrument inputs in mono only, - ADAT Optical outputs and inputs in direct 8‐channel mapping, and - all other outputs and inputs in stereo. [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 16 Feb '25

16 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> ### Device interface The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are AES3 (S/PDIF) via coax - channels 10 and 11 are AES3 (S/PDIF) via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (output only, 12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring The device exposes all 20 channels in all three playback modes. No hardware controls are available with the current driver. ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK, ADAT Optical Interface - _ADAT OUT_: TOSLINK, ADAT Optical Interface or or S/PDIF - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) - RCA in: AES3 or S/PDIF (automatic detection) - RCA out: configurable for AES3 (_Professional_) or S/PDIF (_Consumer_) - XLR in: AES3 or S/PDIF (automatic detection) - XLR out: AES3 only ### Channel configurations The _HiFi_ use case only exposes the most common channel configurations to limit combinatorial complexity: - Analog line outputs in stereo as well as 4.0 and 5.1 surround, - analog microphone and instrument inputs in mono only, - ADAT Optical outputs and inputs in direct 8‐channel mapping, and - all other outputs and inputs in stereo. [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 16 Feb '25

16 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are AES3 (S/PDIF) via coax - channels 10 and 11 are AES3 (S/PDIF) via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (output only, 12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring The device exposes all 20 channels in all three playback modes. No hardware controls are available with the current driver. ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK, ADAT Optical Interface - _ADAT OUT_: TOSLINK, ADAT Optical Interface or or S/PDIF - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) - RCA in: AES3 or S/PDIF (automatic detection) - RCA out: configurable for AES3 (_Professional_) or S/PDIF (_Consumer_) - XLR in: AES3 or S/PDIF (automatic detection) - XLR out: AES3 only ### Channel configurations The _HiFi_ use case only exposes the most common channel configurations to limit combinatorial complexity: - Analog line outputs in stereo as well as 4.0 and 5.1 surround, - analog microphone and instrument inputs in mono only, - ADAT Optical outputs and inputs in direct 8‐channel mapping, and - all other outputs and inputs in stereo. [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 16 Feb '25

16 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are AES3 (S/PDIF) via coax - channels 10 and 11 are AES3 (S/PDIF) via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (output only, 12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES3 L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK, ADAT Optical Interface - _ADAT OUT_: TOSLINK, ADAT Optical Interface or or S/PDIF - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) - RCA in: AES3 or S/PDIF (automatic) - RCA out: configurable for AES3 (_Professional_) or S/PDIF (_Consumer_) - XLR in: AES3 or S/PDIF (automatic) - XLR out: AES3 only [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add support for RME Fireface UCX II
by GitHub pull_request - edited 14 Feb '25

14 Feb '25

alsa-project/alsa-ucm-conf pull request #509 was edited from illdefined: This adds support for the RME Fireface UCX II interface. User manual: <https://rme-audio.de/downloads/fface_ucx2_e.pdf> The interface provides 20 playback and capture channels each: - channels 0 to 7 are analog inputs and outputs - channels 8 and 9 are S/PDIF via coax - channels 10 and 11 are AES/EBU or S/PDIF via XLR - channels 12 to 19 are ADAT Optical Interface (8 channels) or S/PDIF (12 and 13) via TOSLINK The interface supports three _Class Compliant_ playback modes: - _8 Ch. + Phones_: - channels 0+1 are mirrored to 6+7 (headphones L+R), 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES/EBU L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _8 Ch. Playback_: - channels 0+1 are mirrored to 8+9 (S/PDIF L+R) and 12+13 (ADAT 1/2) - channels 2+3 are mirrored to 10+11 (AES/EBU L+R) and 14+15 (ADAT 3/4) - channels 4+5 are mirrored to 16+17 (ADAT 5/6) - channels 6+7 are mirrored to 18+19 (ADAT 7/8) - _20 Ch. Playback_: no channel mirroring ### Physical connector layout top to bottom, left to right, viewed from device front #### Front - _1 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _2 MIC / LINE_: XLR / TRS ¼" combo, balanced mono input, 48 V phantom power - _3 LINE / INSTR._: TRS ¼", balanced mono input - _4 LINE / INSTR._: TRS ¼", balanced mono input - _🎧︎_ (headphones symbol): TRS ¼", unbalanced stereo output #### Back - _LINE INPUTS (BALANCED)_ [_5_, _6_; _7_, _8_]: TRS ¼", balanced mono inputs - _LINE OUTPUTS (BALANCED)_ [_1_, _2_; _3_, _4_; _5_, _6_]: TRS ¼", balanced mono outputs - _ADAT IN_: TOSLINK - _ADAT OUT_: TOSLINK - _AES/EBU & SPDIF_: 9‐pin D-Sub with breakout cable (2 × RCA and 2 × XLR) [alsa-info.txt](https://github.com/user-attachments/files/18790978/alsa-info… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/509.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0