- Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: hda: cs35l41: fix building without CONFIG_SPI
by Arnd Bergmann 03 Jan '24

03 Jan '24

From: Arnd Bergmann <arnd(a)arndb.de> When CONFIG_SPI is disabled, the driver produces unused-variable warning: sound/pci/hda/cs35l41_hda_property.c: In function 'generic_dsd_config': sound/pci/hda/cs35l41_hda_property.c:181:28: error: unused variable 'spi' [-Werror=unused-variable] 181 | struct spi_device *spi; | ^~~ sound/pci/hda/cs35l41_hda_property.c:180:27: error: unused variable 'cs_gpiod' [-Werror=unused-variable] 180 | struct gpio_desc *cs_gpiod; | ^~~~~~~~ Avoid these by turning the preprocessor contionals into equivalent C code, which also helps readability. Fixes: 916d051730ae ("ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/pci/hda/cs35l41_hda_property.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c index 52820ca9c603..a51fb6b0f56d 100644 --- a/sound/pci/hda/cs35l41_hda_property.c +++ b/sound/pci/hda/cs35l41_hda_property.c @@ -215,7 +215,6 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde if (cs35l41->control_bus == SPI) { cs35l41->index = id; -#if IS_ENABLED(CONFIG_SPI) /* * Manually set the Chip Select for the second amp <cs_gpio_index> in the node. * This is only supported for systems with 2 amps, since we cannot expand the @@ -224,7 +223,7 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde * uses a native chip select), to ensure the second amp does not clash with the * first. */ - if (cfg->cs_gpio_index >= 0) { + if (IS_ENABLED(CONFIG_SPI) && cfg->cs_gpio_index >= 0) { spi = to_spi_device(cs35l41->dev); if (cfg->num_amps != 2) { @@ -255,7 +254,6 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde spi_setup(spi); } } -#endif } else { if (cfg->num_amps > 2) /* -- 2.39.2

2 1

[PATCH v4] ASoc: tas2783: Add tas2783 codec driver
by Shenghao Ding 03 Jan '24

03 Jan '24

2 1

[PATCH v3] ALSA: hda: cs35l41: Support more HP models without _DSD
by Lorenz Brun 03 Jan '24

03 Jan '24

This adds overrides for a series of notebooks using a common config taken from HP's proprietary Windows driver. This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31) together with another Realtek quirk and the calibration files from the proprietary driver. Signed-off-by: Lorenz Brun <lorenz(a)brun.one> --- Changes in v2: - Use newly-introduced config table instead of function - Change boost cap value from 10uF to 24uF after cross-referencing my sources with the preexisting 103C89C6 entry. Changes in v3: - Rebase onto sound/for-next - Sorted model table - Updated commit message sound/pci/hda/cs35l41_hda_property.c | 44 ++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c index 52820ca9c603..fcc605be51cf 100644 --- a/sound/pci/hda/cs35l41_hda_property.c +++ b/sound/pci/hda/cs35l41_hda_property.c @@ -42,6 +42,28 @@ static const struct cs35l41_config cs35l41_config_table[] = { * in the ACPI. The Reset GPIO is also valid, so we can use the Reset defined in _DSD. */ { "103C89C6", 2, INTERNAL, { CS35L41_RIGHT, CS35L41_LEFT, 0, 0 }, -1, -1, -1, 1000, 4500, 24 }, + { "103C8A28", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8A29", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8A2A", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8A2B", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8A2C", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8A2D", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8A2E", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8A30", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8A31", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BB3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BB4", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BDF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BE0", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BE1", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BE2", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BE9", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BDD", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BDE", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BE3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BE5", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8BE6", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8B3A", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, { "104312AF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 }, { "10431433", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 }, { "10431463", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 }, @@ -356,6 +378,28 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = { { "CSC3551", "10280BEB", generic_dsd_config }, { "CSC3551", "10280C4D", generic_dsd_config }, { "CSC3551", "103C89C6", generic_dsd_config }, + { "CSC3551", "103C8A28", generic_dsd_config }, + { "CSC3551", "103C8A29", generic_dsd_config }, + { "CSC3551", "103C8A2A", generic_dsd_config }, + { "CSC3551", "103C8A2B", generic_dsd_config }, + { "CSC3551", "103C8A2C", generic_dsd_config }, + { "CSC3551", "103C8A2D", generic_dsd_config }, + { "CSC3551", "103C8A2E", generic_dsd_config }, + { "CSC3551", "103C8A30", generic_dsd_config }, + { "CSC3551", "103C8A31", generic_dsd_config }, + { "CSC3551", "103C8BB3", generic_dsd_config }, + { "CSC3551", "103C8BB4", generic_dsd_config }, + { "CSC3551", "103C8BDF", generic_dsd_config }, + { "CSC3551", "103C8BE0", generic_dsd_config }, + { "CSC3551", "103C8BE1", generic_dsd_config }, + { "CSC3551", "103C8BE2", generic_dsd_config }, + { "CSC3551", "103C8BE9", generic_dsd_config }, + { "CSC3551", "103C8BDD", generic_dsd_config }, + { "CSC3551", "103C8BDE", generic_dsd_config }, + { "CSC3551", "103C8BE3", generic_dsd_config }, + { "CSC3551", "103C8BE5", generic_dsd_config }, + { "CSC3551", "103C8BE6", generic_dsd_config }, + { "CSC3551", "103C8B3A", generic_dsd_config }, { "CSC3551", "104312AF", generic_dsd_config }, { "CSC3551", "10431433", generic_dsd_config }, { "CSC3551", "10431463", generic_dsd_config }, -- 2.42.0

2 1

ASoC: dt-bindings: Query on audio-graph-card DT binding
by Sameer Pujar 03 Jan '24

03 Jan '24

Hi Rob, Mark, Morimoto-san Build error in the example mentioned earlier seems to be expected since it requires one to one connection between remote endpoints. Pasting the error I get: DTC arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dtb dtc: scripts/dtc/livetree.c:437: propval_cell: Assertion `prop->val.len == sizeof(cell_t)' failed. Aborted (core dumped) make[3]: *** [scripts/Makefile.lib:419: arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dtb] Error 134 make[2]: *** [scripts/Makefile.build:480: arch/arm64/boot/dts/nvidia] Error 2 make[1]: *** [/home/spujar/upstream/kernel/Makefile:1476: dtbs] Error 2 make[1]: *** Waiting for unfinished jobs.... CALL scripts/checksyscalls.sh make: *** [Makefile:234: __sub-make] Error 2 Execution failed. Given this, how an endpoint can be shared? Is only solution is to create dummy endpoints for CPU and connect them to each codec? Can you please suggest how this can be addressed? > Hi Morimoto-san, > > This question is regarding audio-graph-card.c driver related DT binding. > > I am looking to enable following DAI link connection in device tree > for Tegra audio: > > /-----> codec1 endpoint > / > CPU endpoint \ > \-----> codec2 endpoint > > > I see that, "remote-endpoint" property can only specify single phandle > object for connection to a remote endpoint. In other words, the link > can be one-to-one. For illustration, please see below example. However > I see it leads to a build error if phandle-array is provided for > "remote-endpoint" property. > > cpu_port { > cpu_ep: endpoint { > remote-endpoint = <&codec1_ep>, <&codec2_ep>; > }; > }; > > codec1 { > codec1_ep: endpoint { > remote-endpoint = <&cpu_ep>; > }; > }; > > codec2 { > codec2_ep: endpoint { > remote-endpoint = <&cpu_ep>; > }; > }; > > Is there a possibility to re-use the same CPU endpoint for connecting > to multiple codec endpoints like shown in above example? >

1 0

Re: Oops in hdac_hda_dev_probe (6.7-rc7)
by Willian Wang 03 Jan '24

03 Jan '24

Hi, just tested the patch and both sound and resume-from-suspend are working like 6.6 again 👍

1 0

Re: Oops in hdac_hda_dev_probe (6.7-rc7)
by Willian Wang 03 Jan '24

03 Jan '24

Hi, just tested the patch and both sound and resume-from-suspend are working like 6.6 again 👍

1 0

topology: Fix dmic nhlt blob building, and fu
by GitHub pull_request - edited 03 Jan '24

03 Jan '24

alsa-project/alsa-utils pull request #250 was edited from jsarha: This PR fixes two issues. FIrst it fixes https://github.com/thesofproject/sof/issues/8670 and then it adds to $[] expressions define handling in object attribute, so that we can use DMIC frequency defines in format objects, wihout ibs and obs attributes referring to those attributes breaking it. Request URL : https://github.com/alsa-project/alsa-utils/pull/250 Patch URL : https://github.com/alsa-project/alsa-utils/pull/250.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

topology: Fix dmic nhlt blob building, and fix $[] attribute value resolving
by GitHub pull_request - edited 03 Jan '24

03 Jan '24

alsa-project/alsa-utils pull request #250 was edited from jsarha: This PR fixes two issues. FIrst it fixes https://github.com/thesofproject/sof/issues/8670 and then it adds to $[] expressions define handling in object attribute, so that we can use DMIC frequency defines in format objects, wihout ibs and obs attributes referring to those attributes breaking it. Request URL : https://github.com/alsa-project/alsa-utils/pull/250 Patch URL : https://github.com/alsa-project/alsa-utils/pull/250.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

sof-audio-pci-intel-tgl/soundwire 6.6.8 kernel outputs no sound on speakers but works on headphones
by Marc MERLIN 02 Jan '24

02 Jan '24

Howdy, First, apologies if I'm not sending this to the right place, I could not find an approrpriate soundwire/sof mailing list, please redirect me as needed (I had to find an old soundwire message for reference) laptop; Dell XPS 17 9730 merlin:~# lspci | grep -i audio 0000:00:1f.3 Multimedia audio controller: Intel Corporation Device 51ca (rev 01) stock mainline 6.6.8 shows the device, but no sound comes out, as if it were muted, but I do not see anyting muted in alsamixer. If I plug in headphones, sound works, if I unplug them, no sound on speakers. Nothing is shown as muted alsamixer and the sound levels look ok. I ran the test as root from console so that pulseaudio/pipewire doesn't get in the way. Under xorg pavucontrol detects when I plug in headphones, and says speaker unvailable, when I switch to headphones output it works, when I unplug the headphones, speaker unavailable goes back to speaker. So I kill X and pulseaudio, play audio on the console directly to alsa instead of pulse and same thing, it plays but no sound on the speakers, but sound on headphones when I plug them in Alsamixer is using default:0 sof-soundwire Any idea what could be muting the speakers if alsamixer shows them unmuted? It is a kernel bug or userspace bug? merlin:~# cat /proc/asound/* cat: /proc/asound/card0: Is a directory 0 [sofsoundwire ]: sof-soundwire - sof-soundwire Intel Soundwire SOF 1: : sequencer 2: [ 0- 0]: digital audio playback 3: [ 0- 1]: digital audio capture 4: [ 0- 2]: digital audio playback 5: [ 0- 4]: digital audio capture 6: [ 0- 5]: digital audio playback 7: [ 0- 6]: digital audio playback 8: [ 0- 7]: digital audio playback 9: [ 0- 2]: hardware dependent 10: [ 0] : control 33: : timer 00-02: HDA Codec 2 0 snd_soc_sof_sdw cat: /proc/asound/oss: Is a directory 00-00: Jack Out (*) : : playback 1 00-01: Jack In (*) : : capture 1 00-02: Speaker (*) : : playback 1 00-04: Microphone (*) : : capture 1 00-05: HDMI 1 (*) : : playback 1 00-06: HDMI 2 (*) : : playback 1 00-07: HDMI 3 (*) : : playback 1 cat: /proc/asound/seq: Is a directory cat: /proc/asound/sofsoundwire: Is a directory G0: system timer : 4000.000us (10000000 ticks) G3: HR timer : 0.001us (1000000000 ticks) Client sequencer queue 1 : stopped P0-0-0: PCM playback 0-0-0 : 21333.333us (1 ticks) SLAVE P0-1-1: PCM capture 0-1-1 : SLAVE P0-2-0: PCM playback 0-2-0 : SLAVE P0-4-1: PCM capture 0-4-1 : SLAVE P0-5-0: PCM playback 0-5-0 : SLAVE P0-6-0: PCM playback 0-6-0 : SLAVE P0-7-0: PCM playback 0-7-0 : SLAVE Advanced Linux Sound Architecture Driver Version k6.6.8-amd64-volpre-sysrq-20231218. merlin:~# dmesg | grep -E '(snd|sof|soundcore)' [ 0.090196] software IO TLB: area num 32. [ 1.567086] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.567087] software IO TLB: mapped [mem 0x0000000053683000-0x0000000057683000] (64MB) [ 15.941644] snd_hda_intel 0000:00:1f.3: vgaarb: pci_notify [ 15.941656] snd_hda_intel 0000:00:1f.3: runtime IRQ mapping not provided by arch [ 15.941662] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 15.942126] snd_hda_intel 0000:00:1f.3: SoundWire enabled on CannonLake+ platform, using SOF driver [ 15.942151] snd_hda_intel 0000:00:1f.3: vgaarb: pci_notify [ 16.089302] sof-audio-pci-intel-tgl 0000:00:1f.3: vgaarb: pci_notify [ 16.089311] sof-audio-pci-intel-tgl 0000:00:1f.3: runtime IRQ mapping not provided by arch [ 16.089317] sof-audio-pci-intel-tgl 0000:00:1f.3: power state changed by ACPI to D0 [ 16.089320] sof-audio-pci-intel-tgl 0000:00:1f.3: ACPI _REG connect evaluation failed (5) [ 16.089417] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 16.089503] sof-audio-pci-intel-tgl 0000:00:1f.3: SoundWire enabled on CannonLake+ platform, using SOF driver [ 16.089542] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002) [ 16.089937] sof-audio-pci-intel-tgl 0000:00:1f.3: vgaarb: pci_notify [ 16.090083] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 [ 16.090473] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 16.102000] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode [ 16.102152] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling bus mastering [ 16.120035] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 4 [ 16.125472] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 16.125499] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 16.125522] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 [ 16.218672] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 16.218704] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 16.235176] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0 [ 16.235457] sof_sdw sof_sdw: ASoC: Parent card not yet available, widget card binding deferred [ 16.285146] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3 [ 16.304414] input: sof-soundwire Headset Jack as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input12 [ 16.307681] input: sof-soundwire HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input13 [ 16.314904] input: sof-soundwire HDMI/DP,pcm=6 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input14 [ 16.321892] input: sof-soundwire HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input15 merlin:~# lsmod | grep -E "(^snd|sof|soundwire)" snd_seq_dummy 12288 0 snd_hrtimer 12288 1 snd_ctl_led 24576 0 snd_soc_sof_sdw 86016 3 snd_soc_intel_hda_dsp_common 16384 1 snd_soc_sof_sdw snd_soc_intel_sof_maxim_common 20480 1 snd_soc_sof_sdw snd_sof_probes 24576 0 snd_soc_rt711_sdca 53248 1 snd_soc_rt715_sdca 45056 1 snd_hda_codec_hdmi 90112 1 snd_soc_rt1316_sdw 28672 2 snd_soc_dmic 12288 0 snd_sof_pci_intel_tgl 12288 2 snd_sof_intel_hda_common 208896 1 snd_sof_pci_intel_tgl snd_sof_intel_hda 24576 1 snd_sof_intel_hda_common snd_sof_pci 24576 2 snd_sof_intel_hda_common,snd_sof_pci_intel_tgl snd_sof_xtensa_dsp 12288 1 snd_sof_intel_hda_common snd_sof 352256 4 snd_sof_pci,snd_sof_intel_hda_common,snd_sof_probes,snd_sof_intel_hda snd_sof_utils 16384 1 snd_sof snd_soc_hdac_hda 24576 1 snd_sof_intel_hda_common snd_soc_acpi_intel_match 98304 2 snd_sof_intel_hda_common,snd_sof_pci_intel_tgl snd_soc_acpi 16384 2 snd_soc_acpi_intel_match,snd_sof_intel_hda_common snd_hda_intel 57344 0 snd_intel_dspcfg 36864 3 snd_hda_intel,snd_sof,snd_sof_intel_hda_common snd_intel_sdw_acpi 16384 2 snd_sof_intel_hda_common,snd_intel_dspcfg snd_hda_codec 217088 5 snd_hda_codec_hdmi,snd_hda_intel,snd_soc_intel_hda_dsp_common,snd_soc_hdac_hda,snd_sof_intel_hda snd_hwdep 20480 1 snd_hda_codec soundwire_intel 69632 5 snd_sof_intel_hda_common snd_sof_intel_hda_mlink 40960 2 soundwire_intel,snd_sof_intel_hda_common soundwire_cadence 40960 1 soundwire_intel snd_hda_ext_core 40960 4 snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_sof_intel_hda_mlink,snd_sof_intel_hda snd_hda_core 147456 8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_intel_hda_dsp_common,snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_sof_intel_hda soundwire_generic_allocation 12288 1 soundwire_intel snd_soc_core 421888 11 snd_soc_sof_sdw,snd_soc_rt715_sdca,snd_soc_rt1316_sdw,soundwire_intel,snd_sof,snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_soc_rt711_sdca,snd_soc_intel_sof_maxim_common,snd_sof_probes,snd_soc_dmic snd_compress 28672 2 snd_soc_core,snd_sof_probes snd_pcm_dmaengine 16384 1 snd_soc_core snd_pcm 192512 16 snd_soc_rt715_sdca,snd_hda_codec_hdmi,snd_soc_rt1316_sdw,snd_hda_intel,snd_hda_codec,soundwire_intel,snd_sof,snd_sof_intel_hda_common,snd_compress,snd_soc_rt711_sdca,snd_soc_core,snd_sof_utils,snd_soc_intel_sof_maxim_common,snd_hda_core,snd_pcm_dmaengine snd_seq_midi 20480 0 snd_seq_midi_event 16384 1 snd_seq_midi snd_rawmidi 53248 1 snd_seq_midi snd_seq 106496 9 snd_seq_midi,snd_seq_midi_event,snd_seq_dummy snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi snd_timer 49152 3 snd_seq,snd_hrtimer,snd_pcm snd 155648 21 snd_ctl_led,snd_soc_sof_sdw,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_sof,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi Thanks, Marc -- "A mouse is a device used to point at the xterm you want to type in" - A.S.R. Home page: http://marc.merlins.org/

2 6

[PATCH v2 0/3] Support Dell models without _DSD
by Stefan Binding 02 Jan '24

02 Jan '24

Add Quirks and driver properties for Dell models. Driver properties are required since these models do not have _DSD. Additionally, some laptops, including some of these, have an issue with their BIOS which causes the SPI speed to be set too slow. To ensure a decent performance for laptops with this slow speed, disable firmware loading. Running without firmware results in lower volume. Changes since v1: - Rebased onto for-linus Stefan Binding (3): ALSA: hda: cs35l41: Support additional Dell models without _DSD ALSA: hda: cs35l41: Prevent firmware load if SPI speed too low ALSA: hda/realtek: Add quirks for Dell models sound/pci/hda/cs35l41_hda.c | 25 ++++++++-- sound/pci/hda/cs35l41_hda.h | 12 ++++- sound/pci/hda/cs35l41_hda_i2c.c | 2 +- sound/pci/hda/cs35l41_hda_property.c | 74 +++++++++++++++------------- sound/pci/hda/cs35l41_hda_spi.c | 2 +- sound/pci/hda/patch_realtek.c | 13 +++++ 6 files changed, 87 insertions(+), 41 deletions(-) -- 2.34.1

2 4