- Alsa-devel - mailman.alsa-project.org

[PATCH v8 00/13] Introduce STM32 Firewall framework
by Gatien Chevallier 03 Feb '24

03 Feb '24

Introduce STM32 Firewall framework for STM32MP1x and STM32MP2x platforms. STM32MP1x(ETZPC) and STM32MP2x(RIFSC) Firewall controllers register to the framework to offer firewall services such as access granting. This series of patches is a new approach on the previous STM32 system bus, history is available here: https://lore.kernel.org/lkml/20230127164040.1047583/ The need for such framework arises from the fact that there are now multiple hardware firewalls implemented across multiple products. Drivers are shared between different products, using the same code. When it comes to firewalls, the purpose mostly stays the same: Protect hardware resources. But the implementation differs, and there are multiple types of firewalls: peripheral, memory, ... Some hardware firewall controllers such as the RIFSC implemented on STM32MP2x platforms may require to take ownership of a resource before being able to use it, hence the requirement for firewall services to take/release the ownership of such resources. On the other hand, hardware firewall configurations are becoming more and more complex. These mecanisms prevent platform crashes or other firewall-related incoveniences by denying access to some resources. The stm32 firewall framework offers an API that is defined in firewall controllers drivers to best fit the specificity of each firewall. For every peripherals protected by either the ETZPC or the RIFSC, the firewall framework checks the firewall controlelr registers to see if the peripheral's access is granted to the Linux kernel. If not, the peripheral is configured as secure, the node is marked populated, so that the driver is not probed for that device. The firewall framework relies on the access-controller device tree binding. It is used by peripherals to reference a domain access controller. In this case a firewall controller. The bus uses the ID referenced by the access-controller property to know where to look in the firewall to get the security configuration for the peripheral. This allows a device tree description rather than a hardcoded peripheral table in the bus driver. The STM32 ETZPC device is responsible for filtering accesses based on security level, or co-processor isolation for any resource connected to it. The RIFSC is responsible for filtering accesses based on Compartment ID / security level / privilege level for any resource connected to it. STM32MP13/15/25 SoC device tree files are updated in this series to implement this mecanism. Changes in V8: - Add missing "simple-bus" compatible in STM32MP13/25 SoC device tree files for the ETZPC/RIFSC nodes - Add missing dependency on OF for OF_DYNAMIC that is selected by STM32_FIREWALL Changes in V7: - Separate indentation changes from access-controllers changes in the device tree file commits - Select OF_DYNAMIC when STM32_FIREWALL is set in order to use of_detach_node() in the firewall framework - Handle previously non-present RNG and HASH nodes in the STM32MP13 device tree file Changes in V6: - Rename access-controller to access-controllers - Remove access-controller-provider - Update device trees and other bindings accordingly - Rework ETZPC/RIFSC bindings to define what access-controllers cells contain inside #access-controller-cells - Some other minor fixes Changes in V5: - Integrate and rework the "feature-domains" binding patch in this patchset. The binding is renamed to "access-controller" - Rename every feature-domain* reference to access-control* ones - Correct loop bug and missing select STM32_FIREWALL in 32-bit platform Kconfig Changes in V4: - Fix typo in commit message and YAML check errors in "dt-bindings: Document common device controller bindings" Note: This patch should be ignored as stated in the cover letter. I've done this to avoid errors on this series of patch - Correct code syntax/style issues reported by Simon Horman - Added Jonathan's tag for IIO on the treewide patch Changes in V3: Change incorrect ordering for bindings commits leading to an error while running "make DT_CHECKER_FLAGS=-m dt_binding_check" Changes in V2: generic: - Add fw_devlink dependency for "feature-domains" property. bindings: - Corrected YAMLS errors highlighted by Rob's robot - Firewall controllers YAMLs no longer define the maxItems for the "feature-domains" property - Renamed st,stm32-rifsc.yaml to st,stm32mp25-rifsc.yaml - Fix examples in YAML files - Change feature-domains maxItems to 2 in firewall consumer files as there should not be more than 2 entries for now - Declare "feature-domain-names" as an optional property for firewall controllers child nodes. - Add missing "feature-domains" property declaration in bosch,m_can.yaml and st,stm32-cryp.yaml files firewall framework: - Support multiple entries for "feature-domains" property - Better handle the device-tree parsing using phandle+args APIs - Remove "resource firewall" type - Add a field for the name of the firewall entry - Fix licenses RIFSC: - Add controller name - Driver is now a module_platform_driver - Fix license ETZPC: - Add controller name - Driver is now a module_platform_driver - Fix license Device trees: - Fix rifsc node name - Move the "ranges" property under the "feature-domains" one Gatien Chevallier (12): dt-bindings: treewide: add access-controllers description dt-bindings: bus: document RIFSC dt-bindings: bus: document ETZPC firewall: introduce stm32_firewall framework of: property: fw_devlink: Add support for "access-controller" bus: rifsc: introduce RIFSC firewall controller driver arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards bus: etzpc: introduce ETZPC firewall controller driver ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards Oleksii Moisieiev (1): dt-bindings: document generic access controllers .../access-controllers.yaml | 84 + .../bindings/bus/st,stm32-etzpc.yaml | 87 + .../bindings/bus/st,stm32mp25-rifsc.yaml | 96 + .../bindings/crypto/st,stm32-cryp.yaml | 4 + .../bindings/crypto/st,stm32-hash.yaml | 4 + .../devicetree/bindings/dma/st,stm32-dma.yaml | 4 + .../bindings/dma/st,stm32-dmamux.yaml | 4 + .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 4 + .../bindings/iio/adc/st,stm32-adc.yaml | 4 + .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 + .../bindings/iio/dac/st,stm32-dac.yaml | 4 + .../bindings/media/cec/st,stm32-cec.yaml | 4 + .../bindings/media/st,stm32-dcmi.yaml | 4 + .../memory-controllers/st,stm32-fmc2-ebi.yaml | 4 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 + .../bindings/mfd/st,stm32-timers.yaml | 4 + .../devicetree/bindings/mmc/arm,pl18x.yaml | 4 + .../bindings/net/can/bosch,m_can.yaml | 4 + .../devicetree/bindings/net/stm32-dwmac.yaml | 4 + .../bindings/phy/phy-stm32-usbphyc.yaml | 4 + .../bindings/regulator/st,stm32-vrefbuf.yaml | 4 + .../devicetree/bindings/rng/st,stm32-rng.yaml | 4 + .../bindings/serial/st,stm32-uart.yaml | 4 + .../bindings/sound/st,stm32-i2s.yaml | 4 + .../bindings/sound/st,stm32-sai.yaml | 4 + .../bindings/sound/st,stm32-spdifrx.yaml | 4 + .../bindings/spi/st,stm32-qspi.yaml | 4 + .../devicetree/bindings/spi/st,stm32-spi.yaml | 4 + .../devicetree/bindings/usb/dwc2.yaml | 4 + MAINTAINERS | 7 + arch/arm/boot/dts/st/stm32mp131.dtsi | 1063 ++++--- arch/arm/boot/dts/st/stm32mp133.dtsi | 51 +- arch/arm/boot/dts/st/stm32mp13xc.dtsi | 19 +- arch/arm/boot/dts/st/stm32mp13xf.dtsi | 19 +- arch/arm/boot/dts/st/stm32mp151.dtsi | 2756 +++++++++-------- arch/arm/boot/dts/st/stm32mp153.dtsi | 52 +- arch/arm/boot/dts/st/stm32mp15xc.dtsi | 19 +- arch/arm/mach-stm32/Kconfig | 1 + arch/arm64/Kconfig.platforms | 1 + arch/arm64/boot/dts/st/stm32mp251.dtsi | 7 +- drivers/bus/Kconfig | 10 + drivers/bus/Makefile | 1 + drivers/bus/stm32_etzpc.c | 141 + drivers/bus/stm32_firewall.c | 294 ++ drivers/bus/stm32_firewall.h | 83 + drivers/bus/stm32_rifsc.c | 252 ++ drivers/of/property.c | 2 + include/linux/bus/stm32_firewall_device.h | 141 + 48 files changed, 3352 insertions(+), 1938 deletions(-) create mode 100644 Documentation/devicetree/bindings/access-controllers/access-controllers.yaml create mode 100644 Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml create mode 100644 Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml create mode 100644 drivers/bus/stm32_etzpc.c create mode 100644 drivers/bus/stm32_firewall.c create mode 100644 drivers/bus/stm32_firewall.h create mode 100644 drivers/bus/stm32_rifsc.c create mode 100644 include/linux/bus/stm32_firewall_device.h -- 2.25.1

3 19

[PATCH v5 0/4] ASoC: qcom: volume fixes and codec cleanups
by Johan Hovold 03 Feb '24

03 Feb '24

To reduce the risk of speaker damage the PA gain needs to be limited on machines like the Lenovo Thinkpad X13s until we have active speaker protection in place. Limit the gain to the current default setting provided by the UCM configuration which most user have so far been using (due to a bug in the configuration files which prevented hardware volume control [1]). The wsa883x PA volume control also turned out to be broken, which meant that the default setting used by UCM configuration is actually the lowest level (-3 dB). With the codec driver fixed, hardware volume control also works as expected. Note that the new wsa884x driver most likely suffers from a similar bug, I'll send a fix for that once I've got that confirmed. Included is also a related fix for the LPASS WSA macro driver, which was changing the digital gain setting behind the back of user space and which can result in excessive (or too low) digital gain. There are further Qualcomm codec drivers that similarly appear to manipulate various gain settings, but on closer inspection it turns out that they only write back the current settings. Tests reveal that these writes are indeed needed for any prior updates to take effect (at least for the WSA and RX macros). Johan [1] https://github.com/alsa-project/alsa-ucm-conf/pull/382 Changes in v5 - rebase on v6.8-rc1 Changes in v4 - keep the full PA volume control range and only fix the exported dB values - use a combined -3 dB machine limit as limiting just the PA volume confuses PulseAudio - drop the PA gain initialisation which is no longer needed Changes in v3 - fix the wsa883x PA volume control and update the machine limits accordingly Changes in v2 - keep the volume register write on power-on in lpass-wsa-macro - drop the other patches removing volume register writes on DAPM events - only drop the constant-zero gain offsets in wcd9335 Johan Hovold (4): ASoC: codecs: wsa883x: fix PA volume control ASoC: qcom: sc8280xp: limit speaker volumes ASoC: codecs: lpass-wsa-macro: fix compander volume hack ASoC: codecs: wcd9335: drop unused gain hack remnant sound/soc/codecs/lpass-wsa-macro.c | 7 ------- sound/soc/codecs/wcd9335.c | 4 ---- sound/soc/codecs/wsa883x.c | 6 +++++- sound/soc/qcom/sc8280xp.c | 12 +++++++----- 4 files changed, 12 insertions(+), 17 deletions(-) -- 2.43.0

4 9

[PATCH AUTOSEL 6.6 16/21] spi: cs42l43: Handle error from devm_pm_runtime_enable
by Sasha Levin 02 Feb '24

02 Feb '24

From: Charles Keepax <ckeepax(a)opensource.cirrus.com> [ Upstream commit f9f4b0c6425eb9ffd9bf62b8b8143e786b6ba695 ] As it devm_pm_runtime_enable can fail due to memory allocations, it is best to handle the error. Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://msgid.link/r/20240124174101.2270249-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/spi/spi-cs42l43.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-cs42l43.c b/drivers/spi/spi-cs42l43.c index d239fc5a49cc..c1556b652909 100644 --- a/drivers/spi/spi-cs42l43.c +++ b/drivers/spi/spi-cs42l43.c @@ -244,7 +244,10 @@ static int cs42l43_spi_probe(struct platform_device *pdev) priv->ctlr->use_gpio_descriptors = true; priv->ctlr->auto_runtime_pm = true; - devm_pm_runtime_enable(priv->dev); + ret = devm_pm_runtime_enable(priv->dev); + if (ret) + return ret; + pm_runtime_idle(priv->dev); regmap_write(priv->regmap, CS42L43_TRAN_CONFIG6, CS42L43_FIFO_SIZE - 1); -- 2.43.0

1 0

[PATCH AUTOSEL 6.7 17/23] spi: cs42l43: Handle error from devm_pm_runtime_enable
by Sasha Levin 02 Feb '24

02 Feb '24

From: Charles Keepax <ckeepax(a)opensource.cirrus.com> [ Upstream commit f9f4b0c6425eb9ffd9bf62b8b8143e786b6ba695 ] As it devm_pm_runtime_enable can fail due to memory allocations, it is best to handle the error. Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://msgid.link/r/20240124174101.2270249-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/spi/spi-cs42l43.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-cs42l43.c b/drivers/spi/spi-cs42l43.c index d239fc5a49cc..c1556b652909 100644 --- a/drivers/spi/spi-cs42l43.c +++ b/drivers/spi/spi-cs42l43.c @@ -244,7 +244,10 @@ static int cs42l43_spi_probe(struct platform_device *pdev) priv->ctlr->use_gpio_descriptors = true; priv->ctlr->auto_runtime_pm = true; - devm_pm_runtime_enable(priv->dev); + ret = devm_pm_runtime_enable(priv->dev); + if (ret) + return ret; + pm_runtime_idle(priv->dev); regmap_write(priv->regmap, CS42L43_TRAN_CONFIG6, CS42L43_FIFO_SIZE - 1); -- 2.43.0

1 0

[PATCH v1] ALSA: hda/realtek: Remove two HP Laptops using CS35L41
by Stefan Binding 02 Feb '24

02 Feb '24

These two HP laptops are changing configurations. Signed-off-by: Stefan Binding <sbinding(a)opensource.cirrus.com> --- sound/pci/hda/patch_realtek.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 348505edf063..3d7e7b32fcf4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9855,8 +9855,6 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8cdd, "HP Spectre", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8cde, "HP Spectre", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8cf5, "HP ZBook Studio 16", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), - SND_PCI_QUIRK(0x103c, 0x8d01, "HP EliteBook G12", ALC287_FIXUP_CS35L41_I2C_4), - SND_PCI_QUIRK(0x103c, 0x8d08, "HP EliteBook 1045 G12", ALC287_FIXUP_CS35L41_I2C_4), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), -- 2.34.1

2 3

[PATCH 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"
by Seven Lee 02 Feb '24

02 Feb '24

Added a DT schema for describing nau8325 audio amplifiers. Signed-off-by: Seven Lee <wtli(a)nuvoton.com> --- .../bindings/sound/nuvoton,nau8325.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file mode 100644 index 000000000000..9105985357aa --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8325 audio Amplifier + +maintainers: + - Seven Lee <WTLI(a)nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nuvoton,nau8325 + + reg: + maxItems: 1 + + nuvoton,vref-impedance: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + VREF impedance selection. + enum: + - 0 # Open + - 1 # 25kOhm + - 2 # 125kOhm + - 3 # 2.5kOhm + default: 2 + + nuvoton,dac-vref: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DAC Reference Voltage Setting. + enum: + - 0 # VDDA + - 1 # VDDA*1.5/1.8V + - 2 # VDDA*1.6/1.8V + - 3 # VDDA*1.7/1.8V + default: 2 + + nuvoton,alc-enable: + description: + Enable digital automatic level control (ALC) function. + type: boolean + + nuvoton,clock-detection-disable: + description: + When clock detection is enabled, it will detect whether MCLK + and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz. + FS range is from 8kHz to 96kHz. + type: boolean + + nuvoton,clock-det-data: + description: + Request clock detection to require 2048 non-zero samples before enabling + the audio paths. If set then non-zero samples is required, otherwise it + doesn't matter. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@21 { + compatible = "nuvoton,nau8325"; + reg = <0x21>; + nuvoton,vref-impedance = <2>; + nuvoton,dac-vref = <2>; + nuvoton,alc-enable; + nuvoton,clock-det-data; + }; + }; -- 2.25.1

4 11

[GIT PULL] ASoC fixes for v6.8-rc2-2
by Mark Brown 01 Feb '24

01 Feb '24

The following changes since commit 41bccc98fb7931d63d03f326a746ac4d429c1dd3: Linux 6.8-rc2 (2024-01-28 17:01:12 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.8-rc2-2 for you to fetch changes up to e81fdba0208666b65bafeaba814874b4d6e5edde: ALSA: Various fixes for Cirrus Logic CS35L56 support (2024-02-01 17:45:32 +0000) ---------------------------------------------------------------- ASoC: Fixes for v6.8 This pull request adds Richard Fitzgerald's series with extensive fixes for the CS35L56, he said: These patches fix various things that were undocumented, unknown or uncertain when the original driver code was written. And also a few things that were just bugs. ---------------------------------------------------------------- Chen-Yu Tsai (3): ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616 ASoC: sun4i-spdif: Fix requirements for H6 ASoC: sun4i-spdif: Add Allwinner H616 compatible Fei Shao (1): ASoC: codecs: ES8326: Remove executable bit Johan Hovold (5): ASoC: codecs: wsa883x: fix PA volume control ASoC: codecs: lpass-wsa-macro: fix compander volume hack ASoC: codecs: wcd9335: drop unused gain hack remnant ASoC: codecs: wcd938x: fix headphones volume controls ASoC: qcom: sc8280xp: limit speaker volumes Krzysztof Kozlowski (4): ASoC: codecs: wcd938x: handle deferred probe ASoC: codecs: wcd938x: skip printing deferred probe failuers ASoC: codecs: wcd934x: drop unneeded regulator include ASoC: allow up to eight CPU/codec DAIs Marian Postevca (1): ASoC: amd: acp: Fix support for a Huawei Matebook laptop Mark Brown (4): ASoC: codecs: fix ES8326 performance and pop noise ASoC: qcom: volume fixes and codec cleanups arm64: sun50i-h616: Add DMA and SPDIF controllers ALSA: Various fixes for Cirrus Logic CS35L56 support Richard Fitzgerald (18): ASoC: wm_adsp: Fix firmware file search order ASoC: wm_adsp: Don't overwrite fwf_name with the default ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp ASoC: cs35l56: Don't add the same register patch multiple times ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed() ASoC: cs35l56: Fix to ensure ASP1 registers match cache ASoC: cs35l56: Fix default SDW TX mixer registers ALSA: hda: cs35l56: Initialize all ASP1 registers ASoC: cs35l56: Fix for initializing ASP1 mixer registers ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision ASoC: cs35l56: Firmware file must match the version of preloaded firmware ASoC: cs35l56: Load tunings for the correct speaker models ASoC: cs35l56: Allow more time for firmware to boot ALSA: hda: cs35l56: Fix order of searching for firmware files ALSA: hda: cs35l56: Fix filename string field layout ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware ALSA: hda: cs35l56: Remove unused test stub function Techno Mooney (1): ASoC: amd: yc: Add DMI quirk for MSI Bravo 15 C7VF Venkata Prasad Potturu (3): ASoC: amd: acp: Enable rt5682s clocks in acp slave mode ASoC: amd: acp: Update platform name for different boards ASoC: amd: acp: Add check for cpu dai link initialization Zhu Ning (4): ASoC: codecs: ES8326: improving crosstalk performance ASoC: codecs: ES8326: Improving the THD+N performance ASoC: codecs: ES8326: Minimize the pop noise on headphone ASoC: codecs: ES8326: fix the capture noise issue .../bindings/sound/allwinner,sun4i-a10-spdif.yaml | 5 +- include/sound/cs35l56.h | 7 +- sound/pci/hda/cs35l56_hda.c | 136 ++++++---- sound/soc/amd/acp/acp-mach-common.c | 16 +- sound/soc/amd/acp/acp-sof-mach.c | 4 + sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c | 8 + sound/soc/amd/yc/acp6x-mach.c | 7 + sound/soc/codecs/cs35l56-shared.c | 140 ++++++++-- sound/soc/codecs/cs35l56.c | 301 ++++++++++++++++++--- sound/soc/codecs/cs35l56.h | 2 + sound/soc/codecs/es8326.c | 186 +++++++++---- sound/soc/codecs/es8326.h | 3 +- sound/soc/codecs/lpass-wsa-macro.c | 7 - sound/soc/codecs/wcd9335.c | 4 - sound/soc/codecs/wcd934x.c | 1 - sound/soc/codecs/wcd938x.c | 8 +- sound/soc/codecs/wm_adsp.c | 73 +++-- sound/soc/codecs/wsa883x.c | 6 +- sound/soc/qcom/sc8280xp.c | 12 +- sound/soc/soc-core.c | 5 +- sound/soc/sunxi/sun4i-spdif.c | 5 + 21 files changed, 696 insertions(+), 240 deletions(-) mode change 100755 => 100644 sound/soc/codecs/es8326.c

2 2

[PATCH 00/18] ALSA: Various fixes for Cirrus Logic CS35L56 support
by Richard Fitzgerald 01 Feb '24

01 Feb '24

This chain of patches fixes various things that were undocumented, unknown or uncertain when the original driver code was written. And also a few things that were just bugs. The HDA patches have dependencies on the ASoC patches, except for the final patch that removes a bogus test stub function. Richard Fitzgerald (18): ASoC: wm_adsp: Fix firmware file search order ASoC: wm_adsp: Don't overwrite fwf_name with the default ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp ASoC: cs35l56: Don't add the same register patch multiple times ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed() ASoC: cs35l56: Fix to ensure ASP1 registers match cache ASoC: cs35l56: Fix default SDW TX mixer registers ALSA: hda: cs35l56: Initialize all ASP1 registers ASoC: cs35l56: Fix for initializing ASP1 mixer registers ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision ASoC: cs35l56: Firmware file must match the version of preloaded firmware ASoC: cs35l56: Load tunings for the correct speaker models ASoC: cs35l56: Allow more time for firmware to boot ALSA: hda: cs35l56: Fix order of searching for firmware files ALSA: hda: cs35l56: Fix filename string field layout ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware ALSA: hda: cs35l56: Remove unused test stub function include/sound/cs35l56.h | 7 +- sound/pci/hda/cs35l56_hda.c | 138 ++++++++------ sound/soc/codecs/cs35l56-shared.c | 140 ++++++++++++-- sound/soc/codecs/cs35l56.c | 307 +++++++++++++++++++++++++----- sound/soc/codecs/cs35l56.h | 2 + sound/soc/codecs/wm_adsp.c | 73 +++---- 6 files changed, 498 insertions(+), 169 deletions(-) -- 2.39.2

4 24

[PATCH] ALSA: usb-audio: Ignore clock selector errors for single connection
by Alexander Tsoy 01 Feb '24

01 Feb '24

For devices with multiple clock sources connected to a selector, we need to check what a clock selector control request has returned. This is needed to ensure that a requested clock source is indeed selected and for autoclock feature to work. For devices with single clock source connected, if we get an error there is nothing else we can do about it. We can't skip clock selector setup as it is required by some devices. So lets just ignore error in this case. This should fix various buggy Mackie devices: [ 649.109785] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32) [ 649.111946] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32) [ 649.113822] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32) There is also interesting info from the Windows documentation [1] (this is probably why manufacturers dont't even test this feature): "The USB Audio 2.0 driver doesn't support clock selection. The driver uses the Clock Source Entity, which is selected by default and never issues a Clock Selector Control SET CUR request." Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-au… [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=217314 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218175 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218342 Signed-off-by: Alexander Tsoy <alexander(a)tsoy.me> --- sound/usb/clock.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/sound/usb/clock.c b/sound/usb/clock.c index a8204c6d6fac..60fcb872a80b 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -347,8 +347,16 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, !writeable) return ret; err = uac_clock_selector_set_val(chip, entity_id, cur); - if (err < 0) + if (err < 0) { + if (pins == 1) { + usb_audio_dbg(chip, + "%s(): selector returned an error, " + "assuming a firmware bug, id %d, ret %d\n", + __func__, clock_id, err); + return ret; + } return err; + } } if (!validate || ret > 0 || !chip->autoclock) -- 2.43.0

2 3

[PATCH] ALSA: usb-audio: retry clock validate when it takes some times
by vincenttew 01 Feb '24

01 Feb '24

Behringer UMC202HD and UMC404HD take some times to validate the clock source. To prevent more DAC have the same delay which return the false in the first time, remove the USB id check to have a chance to retry the clock validate. Signed-off-by: vincenttew <vincenttew(a)google.com> --- sound/usb/clock.c | 43 ++++++++++++++++++------------------------- 1 file changed, 18 insertions(+), 25 deletions(-) diff --git a/sound/usb/clock.c b/sound/usb/clock.c index b118cf97607f..16d7a456dd10 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -181,34 +181,27 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip, return true; } - /* - * MOTU MicroBook IIc - * Sample rate changes takes more than 2 seconds for this device. Clock - * validity request returns false during that period. - */ - if (chip->usb_id == USB_ID(0x07fd, 0x0004)) { - count = 0; + count = 0; - while ((!ret) && (count < 50)) { - int err; + while ((!ret) && (count < 50)) { + int err; - msleep(100); - - err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, - USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, - UAC2_CS_CONTROL_CLOCK_VALID << 8, - snd_usb_ctrl_intf(chip) | (source_id << 8), - &data, sizeof(data)); - if (err < 0) { - dev_warn(&dev->dev, - "%s(): cannot get clock validity for id %d\n", - __func__, source_id); - return false; - } - - ret = !!data; - count++; + msleep(100); + + err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + UAC2_CS_CONTROL_CLOCK_VALID << 8, + snd_usb_ctrl_intf(chip) | (source_id << 8), + &data, sizeof(data)); + if (err < 0) { + dev_warn(&dev->dev, + "%s(): cannot get clock validity for id %d\n", + __func__, source_id); + return false; } + + ret = !!data; + count++; } return ret; -- 2.43.0.429.g432eaa2c6b-goog

3 2