- Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: hda: cs35l41: Support HP Spectre x360 14 eu0000
by Anthony I Gilea 18 Mar '24

18 Mar '24

The new HP Spectre x360 has _DSD for CS35L41 amps in ACPI but reset-gpios and spk-id-gpios are merged into single Package of size 4 so _DSD parser fails to parse it. Overwrite broken _DSD with the correct configuration. Signed-off-by: Anthony I Gilea <i(a)cpp.in> --- sound/pci/hda/cs35l41_hda_property.c | 2 ++ 1 file changed, 2 insertions(+) diff --ruNp a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c --- a/sound/pci/hda/cs35l41_hda_property.c 2024-03-10 23:38:09.000000000 +0300 +++ b/sound/pci/hda/cs35l41_hda_property.c 2024-03-14 18:22:01.887566917 +0300 @@ -64,6 +64,7 @@ static const struct cs35l41_config cs35l { "103C8BE5", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, { "103C8BE6", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, { "103C8B3A", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, + { "103C8C15", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 }, { "104312AF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 }, { "10431433", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 }, { "10431463", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 }, @@ -405,6 +406,7 @@ static const struct cs35l41_prop_model c { "CSC3551", "103C8BE5", generic_dsd_config }, { "CSC3551", "103C8BE6", generic_dsd_config }, { "CSC3551", "103C8B3A", generic_dsd_config }, + { "CSC3551", "103C8C15", generic_dsd_config }, { "CSC3551", "104312AF", generic_dsd_config }, { "CSC3551", "10431433", generic_dsd_config }, { "CSC3551", "10431463", generic_dsd_config },

3 2

[PATCH v11] ASoc: tas2783: Add tas2783 codec driver
by Shenghao Ding 18 Mar '24

18 Mar '24

The tas2783 is a smart audio amplifier with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces designed for portable applications. An on-chip DSP supports Texas Instruments SmartAmp speaker protection algorithm. The integrated speaker voltage and current sense provides for real-time monitoring of loudspeakers. The ASoC component provides the majority of the functionality of the device, all the audio functions. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- Change in v11: - simplify tasdevice_set_sdw_stream - fixed some Linux coding style - fixed the spelling mistakes - Select left/right channel based on unique id - a longer description has been added - remove unused crc8 in KCONFIG - Invert of RE here means reciprocal of RE - correct indentation - correct the wrong pow calibrated register - correct comment on RESET register - fixed usually lines don't end with an open parenthesis - fixed tasdevice_sdw_shutdown - use defines for function, entity, etc. for readable - remove unnecessary codec_lock in component_probe() - remove struct sdw_stream_data - remove unused macro definitions - use BIT(2) and BIT(1) instead of 0x2 and 0x1 - implement pm_runtime - reg_start is u8, reg_start + i only adds i byte, it should be reg_start + i * 4, because the calibration values - fixed total_sz in tas2783_calibration - add a define for TASDEVICE_REG(0, 0, 0x0a) - rework macro style in header file - Add select CRC32 - rewrite the mute and the return value handling - Add comments on bin file - Add link_id into the fw name to distinguish the same sdw id on different sdw id. - remove unnecessary mutex_lock - use set_active() in tasdevice_io_init and move all other parts in the probe. - move pm_runtime_get_noresume to the probe - fix the return value of putvol function - add put_noidle in tasdevice_sdw_remove - remove unused header file(of.h) - correct the style of the multi-line comment - Set the readable registers in tas2783_readable_register for debugfs - Use new PM macros - Use default put and get inline SOC_SINGLE_RANGE_TLV and SOC_SINGLE_SX_TLV - Use respective %pt to log the calibrated time - Remove unnecessary struct tm - Add trailing comma tasdevice_dapm_widgets and tasdevice_audio_map - Rewrite the return value handling in tasdevice_sdw_probe - use dev_num instead of id.unique_id - rework the log - Add code to check the size of calibrated data in UEFI - Add description of Layout of calibrated Data in UEFI - switch back link_id and unique_id to identify the devcie - unique_id offset as the device index of the calibrated data - update calibrated data layout stored in UEFI, add link_id and unique_id into the calibrated data in case of tas2783 sitting in different SDQW buses. - correct the wrong unique_id - set the unique_id as hex style in dsp bin file name --- sound/soc/codecs/Kconfig | 16 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 932 +++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 106 ++++ 4 files changed, 1056 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 59f9742e9ff4..6ba3fd0c0811 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -247,6 +247,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2781_COMLIB imply SND_SOC_TAS2781_FMWLIB imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1847,6 +1848,21 @@ config SND_SOC_TAS2781_I2C algo coefficient setting, for one, two or even multiple TAS2781 chips. +config SND_SOC_TAS2783 + tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" + depends on SOUNDWIRE + depends on EFI + select REGMAP + select REGMAP_SOUNDWIRE + select CRC32 + select CRC32_SARWATE + help + Enable support for Texas Instruments TAS2783 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + TAS2783 supports the MIPI SoundWire v1.2 compatible interface + for audio and control data. At the end of calibrated data appends + the crc data with crc32_sarwate for error detection. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f53baa2b9565..6afceb126ae3 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -284,6 +284,7 @@ snd-soc-tas2770-objs := tas2770.o snd-soc-tas2781-comlib-objs := tas2781-comlib.o snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o snd-soc-tas2781-i2c-objs := tas2781-i2c.o +snd-soc-tas2783-objs := tas2783-sdw.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -664,6 +665,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000000..71c218792bc9 --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,932 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier +// +// Copyright (C) 2023 - 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// Kevin Lu <kevin-lu(a)ti.com> +// Shenghao Ding <shenghao-ding(a)ti.com> +// + +#include <asm/unaligned.h> +#include <linux/acpi.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/pcm_params.h> +#include <sound/sdw.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include <sound/tas2781-tlv.h> +#include "tas2783.h" + +static const unsigned int tas2783_cali_reg[] = { + TAS2783_CALIBRATION_RE, /* Resistance */ + TAS2783_CALIBRATION_RE_LOW, /* Low limitation of RE */ + TAS2783_CALIBRATION_INV_RE, /* Reciprocal of RE */ + TAS2783_CALIBRATION_POW, /* RMS Power */ + TAS2783_CALIBRATION_TLIMIT /* Temperature limitation */ +}; + +static const struct reg_default tas2783_reg_defaults[] = { + /* Default values for ROM mode. Activated. */ + { 0x8002, 0x1a }, /* AMP inactive. */ + { 0x8097, 0xc8 }, + { 0x80b5, 0x74 }, + { 0x8099, 0x20 }, + { 0xfe8d, 0x0d }, + { 0xfebe, 0x4a }, + { 0x8230, 0x00 }, + { 0x8231, 0x00 }, + { 0x8232, 0x00 }, + { 0x8233, 0x01 }, + { 0x8418, 0x00 }, /* Set volume to 0 dB. */ + { 0x8419, 0x00 }, + { 0x841a, 0x00 }, + { 0x841b, 0x00 }, + { 0x8428, 0x40 }, /* Unmute channel */ + { 0x8429, 0x00 }, + { 0x842a, 0x00 }, + { 0x842b, 0x00 }, + { 0x8548, 0x00 }, /* Set volume to 0 dB. */ + { 0x8549, 0x00 }, + { 0x854a, 0x00 }, + { 0x854b, 0x00 }, + { 0x8558, 0x40 }, /* Unmute channel */ + { 0x8559, 0x00 }, + { 0x855a, 0x00 }, + { 0x855b, 0x00 }, + { 0x800a, 0x3a }, /* Enable both channel */ + { 0x800e, 0x44 }, + { 0x800f, 0x40 }, + { 0x805c, 0x99 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_VOLUME, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, +}; + +static bool tas2783_readable_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8000 ... 0x807F: /* Page 0 */ + return true; + default: + return false; + } +} + +static bool tas2783_volatile_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + /* + * Only software reset register was volatiled. + * Bit is self clearing. + * 0b = Don't reset + * 1b = reset + */ + case 0x8001: + return true; + default: + return false; + } +} + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .max_register = 0x44ffffff, + .reg_defaults = tas2783_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_TLV("Digital Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, dvc_tlv), + SOC_SINGLE_SX_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, amp_vol_tlv), +}; + +static void tas2783_apply_calibv1(struct tasdevice_priv *tas_dev, + unsigned int *cali_data) +{ + struct regmap *map = tas_dev->regmap; + u8 *cali_start; + u16 offset; + int ret; + + if (!tas_dev->sdw_peripheral) { + dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n", + __func__); + return; + } + + offset = tas_dev->sdw_peripheral->id.unique_id - + TAS2783_UNIQUE_ID_BASE; + if (offset >= TAS2783_MAX_DEV_NUM) { + dev_err(tas_dev->dev, "%s: offset(%u) is out of range.\n", + __func__, offset); + return; + } + + /* + * The area saving tas2783 calibrated data is specified by its + * unique_id offset. cali_start is the first address of current + * tas2783's calibrated data. + */ + cali_start = (u8 *)(cali_data + offset * sizeof(tas2783_cali_reg)); + for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) { + ret = regmap_bulk_write(map, tas2783_cali_reg[i], + &cali_start[4 * i], 4); + if (ret) { + dev_err(tas_dev->dev, "Cali failed %x:%d\n", + tas2783_cali_reg[i], ret); + break; + } + } +} + +static void tas2783_apply_calibv2(struct tasdevice_priv *tas_dev, + unsigned int *cali_data) +{ + const unsigned int arr_size = ARRAY_SIZE(tas2783_cali_reg); + struct regmap *map = tas_dev->regmap; + unsigned int dev_sum = cali_data[1], i, j, k; + u8 *cali_start; + u16 dev_info; + int ret; + + if (!tas_dev->sdw_peripheral) { + dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n", + __func__); + return; + } + + dev_info = tas_dev->sdw_peripheral->bus->link_id | + tas_dev->sdw_peripheral->id.unique_id << 16; + + /* + * The area saving tas2783 calibrated data is specified by its + * unique_id offset. cali_start is the first address of current + * tas2783's calibrated data. + */ + cali_start = (u8 *)&cali_data[3]; + for (i = 0; i < dev_sum; i++) { + k = i * (arr_size + 1) + 3; + if (dev_info != cali_data[k]) { + for (j = 0; j < arr_size; j++) { + k = 4 * (k + 1 + j); + ret = regmap_bulk_write(map, + tas2783_cali_reg[j], + &cali_start[k], 4); + if (ret) { + dev_err(tas_dev->dev, + "Cali failed %x:%d\n", + tas2783_cali_reg[j], ret); + break; + } + } + break; + } + } +} + +/* + * Load the calibration data, including speaker impedance, f0, etc. + * Calibration is done by the manufacturer in the factory. The calibration + * data are used by the algorithm for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * The DSP will work with default data values if calibrated data are + * missing or are invalid. + * Layout of calibrated Data in UEFI(total 256 bytes): + * V2: + * ChipID (2783, 4 bytes) + * Device-Sum (4 bytes) + * TimeStamp of Calibration (4 bytes) + * for (i = 0; i < Device-Sum; i++) { + * Device #i info () { + * SDW link id (2bytes) + * SDW unique_id (2bytes) + * } + * Calibrated Data of Device #i (20 bytes) + * } + * CRC (4 bytes) + * Reserved (the rest) + * Or + * V1: + * Calibrated Data of Dev 0(unique_id offset 0) (20 bytes) + * Calibrated Data of Dev 1(unique_id offset 1) (20 bytes) + * Calibrated Data of Dev 2(unique_id offset 2) (20 bytes) + * Calibrated Data of Dev 3(unique_id offset 3) (20 bytes) + * Calibrated Data of Dev 4(unique_id offset 4) (20 bytes) + * Calibrated Data of Dev 5(unique_id offset 5) (20 bytes) + * Calibrated Data of Dev 6(unique_id offset 6) (20 bytes) + * Calibrated Data of Dev 7(unique_id offset 7) (20 bytes) + * TimeStamp of Calibration (4 bytes) + * CRC (4 bytes) + * Reserved (88 bytes) + */ +static void tas2783_calibration(struct tasdevice_priv *tas_dev) +{ + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + static efi_char16_t efi_name[] = L"CALI_DATA"; + struct calibration_data cali_data; + unsigned int *tmp_val; + unsigned int crc; + efi_status_t status; + + cali_data.total_sz = 0; + + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, NULL); + if (status == EFI_BUFFER_TOO_SMALL + && cali_data.total_sz < TAS2783_MAX_CALIDATA_SIZE) { + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, + cali_data.data); + dev_dbg(tas_dev->dev, "%s: cali get %lx bytes result:%ld\n", + __func__, cali_data.total_sz, status); + } + if (status != 0) { + /* Failed got calibration data from EFI. */ + dev_dbg(tas_dev->dev, "No calibration data in UEFI."); + return; + } + + tmp_val = (unsigned int *)cali_data.data; + + if (tmp_val[0] == 2783) { + /* Calibrated Data V2 */ + unsigned int dev_sum = tmp_val[1]; + + if (dev_sum > TAS2783_MAX_DEV_NUM || + dev_sum == 0) { + dev_dbg(tas_dev->dev, "No dev in calibrated data V2."); + return; + } + crc = crc32(~0, cali_data.data, 12 + dev_sum * 24) ^ ~0; + if (crc == tmp_val[3 + dev_sum * 6]) { + tas2783_apply_calibv2(tas_dev, tmp_val); + dev_dbg(tas_dev->dev, "V2: %ptTs", &tmp_val[40]); + } else { + dev_dbg(tas_dev->dev, + "V2: CRC 0x%08x not match 0x%08x\n", + crc, tmp_val[41]); + } + } else { + /* Calibrated Data V1 */ + /* 8 devs * 20 bytes calibrated data/dev + 4 bytes Timestamp */ + crc = crc32(~0, cali_data.data, 164) ^ ~0; + if (crc == tmp_val[41]) { + /* Date and time of when calibration was done. */ + tas2783_apply_calibv1(tas_dev, tmp_val); + dev_dbg(tas_dev->dev, "V1: %ptTs", &tmp_val[40]); + } else { + dev_dbg(tas_dev->dev, + "V1: CRC 0x%08x not match 0x%08x\n", + crc, tmp_val[41]); + } + } +} + +static void tasdevice_dspfw_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tas2783_firmware_node *p; + struct regmap *map = tas_dev->regmap; + unsigned char *buf = NULL; + int offset = 0, img_sz; + int ret; + + if (!fmw || !fmw->data) { + dev_warn(tas_dev->dev, + "%s: failed to read %s: work in bypass-dsp mode.\n", + __func__, tas_dev->dspfw_binaryname); + return; + } + buf = (unsigned char *)fmw->data; + + img_sz = get_unaligned_le32(&buf[offset]); + offset += sizeof(img_sz); + if (img_sz != fmw->size) { + dev_warn(tas_dev->dev, "%s: size not matching, %d %u.", + __func__, (int)fmw->size, img_sz); + return; + } + + while (offset < img_sz) { + p = (struct tas2783_firmware_node *)(buf + offset); + if (p->length > 1) { + ret = regmap_bulk_write(map, p->download_addr, + buf + offset + sizeof(unsigned int) * 5, p->length); + } else { + ret = regmap_write(map, p->download_addr, + *(buf + offset + sizeof(unsigned int) * 5)); + } + + if (ret != 0) { + dev_dbg(tas_dev->dev, + "%s: load FW fail: %d, work in bypass.\n", + __func__, ret); + return; + } + offset += sizeof(unsigned int) * 5 + p->length; + } + + tas2783_calibration(tas_dev); +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC"), +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"OUT", NULL, "ASI"}, + {"ASI OUT", NULL, "DMIC"}, +}; + +static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, int direction) +{ + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + snd_soc_dai_set_dma_data(dai, substream, NULL); +} + +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_runtime *sdw_stream; + int ret; + + dev_dbg(dai->dev, "%s: dai_name %s", __func__, dai->name); + sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!sdw_stream) + return -EINVAL; + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral, + &stream_config, &port_config, 1, sdw_stream); + if (ret) { + dev_err(dai->dev, "%s: Unable to configure port\n", __func__); + return ret; + } + + dev_dbg(dai->dev, "%s: format: %i rate: %i\n", __func__, + params_format(params), params_rate(params)); + + return 0; +} + +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *sdw_stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream); + + return 0; +} + +static int tasdevice_mute(struct snd_soc_dai *dai, int mute, + int direction) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + struct regmap *map = tas_dev->regmap; + int ret; + + dev_dbg(tas_dev->dev, "%s: %d.\n", __func__, mute); + + if (mute) { + if (direction == SNDRV_PCM_STREAM_CAPTURE) { + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_INACTIVE); + if (ret) + dev_err(tas_dev->dev, + "%s: Disable AEF failed.\n", __func__); + } else { + /* FU23 mute (0x40400108) */ + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 1); + if (ret) { + dev_err(tas_dev->dev, + "%s: FU23 mute failed.\n", __func__); + goto out; + } + /* + * Both playback and echo data will be shutdown in + * playback stream. + */ + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK | + TAS2783_REG_AEF_MASK, + TAS2783_REG_PWR_MODE_ACTIVE | + TAS2783_REG_PWR_MODE_SW_PWD); + if (ret) { + dev_err(tas_dev->dev, + "%s: PWR&AEF shutdown failed.\n", + __func__); + goto out; + } + tas_dev->pstream = false; + } + } else { + /* FU23 Unmute, 0x40400108. */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) { + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0); + if (ret) { + dev_err(tas_dev->dev, + "%s: FU23 Unmute failed.\n", __func__); + goto out; + } + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK, + TAS2783_REG_PWR_MODE_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, + "%s: PWR Unmute failed.\n", __func__); + goto out; + } + tas_dev->pstream = true; + } else { + /* Capture stream is the echo ref data for voice. + * Without playback, it can't be active. + */ + if (tas_dev->pstream == true) { + ret = regmap_update_bits(map, + TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, + "%s: AEF enable failed.\n", + __func__); + goto out; + } + } else { + dev_err(tas_dev->dev, + "%s: No playback, no AEF!", __func__); + ret = -EINVAL; + } + } + } +out: + if (ret) + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n", + mute, ret); + + return ret; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .mute_stream = tasdevice_mute, + .hw_params = tasdevice_sdw_hw_params, + .hw_free = tasdevice_sdw_pcm_hw_free, + .set_stream = tasdevice_set_sdw_stream, + .shutdown = tasdevice_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2783-codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static int tasdevice_comp_probe(struct snd_soc_component *comp) +{ + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(comp); + acpi_handle handle = ACPI_HANDLE(tas_dev->dev); + const struct firmware *fw_entry = NULL; + const char *sub = NULL; + int ret; + + if (handle) { + sub = acpi_get_subsystem_id(handle); + if (IS_ERR(sub)) + sub = NULL; + } + + tas_dev->component = comp; + + /* + * Each tas2783 in the system has its own dspfw. + */ + if (comp->name_prefix) { + /* + * name_prefix.bin stores the dsp firmware including speaker + * protection algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied into + * firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, "%s-tas2783.bin", + comp->name_prefix); + } else { + /* Compatible with the previous naming rule */ + if (sub) { + /* + * subsys_id-link_id[0,1,...,N]-unique_id + * [0x8,...,0xf].bin stores the dsp firmware including + * speaker protection algorithm, audio acoustic + * algorithm, speaker characters and algorithm params, + * it must be copied into firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, + "%s-%d-0x%x.bin", sub, + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } else { + /* + * tas2783-link_id[0,1,...,N]-unique_id + * [0x8,...,0xf].bin stores the dsp firmware including + * speaker protection algorithm, audio acoustic + * algorithm, speaker characters and algorithm params, + * it must be copied into firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, + "tas2783-%d-0x%x.bin", + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } + } + + ret = request_firmware(&fw_entry, tas_dev->dspfw_binaryname, + tas_dev->dev); + if (ret) { + dev_err(tas_dev->dev, + "%s: request_firmware %x open status: %d.\n", __func__, + tas_dev->sdw_peripheral->id.unique_id, ret); + goto out; + } + + tasdevice_dspfw_ready(fw_entry, tas_dev); + +out: + if (fw_entry) + release_firmware(fw_entry); + return 0; +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_comp_probe, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret; + + dev_set_drvdata(tas_dev->dev, tas_dev); + + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:%d.\n", + __func__, ret); + return ret; + } + + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000); + pm_runtime_use_autosuspend(tas_dev->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(tas_dev->dev); + pm_runtime_enable(tas_dev->dev); + + return 0; +} + +static int tasdevice_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + struct sdw_dpn_prop *dpn; + unsigned long addr; + int nval, i, j; + u32 bit; + + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = BIT(2); /* BITMAP: 00000100 */ + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + j = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[j].num = bit; + dpn[j].type = SDW_DPN_FULL; + dpn[j].simple_ch_prep_sm = true; + dpn[j].ch_prep_timeout = 10; + j++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + return 0; +} + +static int tasdevice_io_init(struct device *dev, + struct sdw_slave *slave) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + int ret; + + regcache_cache_only(tas_priv->regmap, false); + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, true); + } else { + /* + * PM runtime is only enabled when a Slave reports as Attached + * Update count of parent 'active' children. + */ + pm_runtime_set_active(&slave->dev); + } + + /* sw reset */ + ret = regmap_write(tas_priv->regmap, TAS2873_REG_SWRESET, + TAS2873_REG_SWRESET_RESET); + if (ret) { + dev_err(tas_priv->dev, "Reset failed.\n"); + goto out; + } + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, false); + regcache_mark_dirty(tas_priv->regmap); + } + + tas_priv->first_hw_init = true; + tas_priv->hw_init = true; + +out: + return ret; +} + +static int tasdevice_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev); + + /* Update the status */ + tas_priv->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + tas_priv->hw_init = false; + /* + * Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tas_priv->hw_init || tas_priv->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return tasdevice_io_init(&slave->dev, slave); +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static const struct sdw_slave_ops tasdevice_sdw_ops = { + .read_prop = tasdevice_read_prop, + .update_status = tasdevice_update_status, +}; + +static int tasdevice_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct device *dev = &peripheral->dev; + struct tasdevice_priv *tas_dev; + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) + return -ENOMEM; + + tas_dev->dev = dev; + tas_dev->chip_id = id->driver_data; + tas_dev->sdw_peripheral = peripheral; + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + tas_dev->hw_init = false; + tas_dev->first_hw_init = false; + + dev_set_drvdata(dev, tas_dev); + + tas_dev->regmap = devm_regmap_init_sdw(peripheral, &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) + return dev_err_probe(dev, PTR_ERR(tas_dev->regmap), + "Failed devm_regmap_init_sdw."); + + return tasdevice_init(tas_dev); +} + +static int tasdevice_sdw_remove(struct sdw_slave *peripheral) +{ + struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev); + + if (tas_dev->first_hw_init) + pm_runtime_disable(tas_dev->dev); + + return 0; +} + +static const struct sdw_device_id tasdevice_sdw_id[] = { + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0), + {} +}; +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id); + +static int __maybe_unused tas2783_sdca_dev_suspend(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + + if (!tas_priv->hw_init) + return 0; + + regcache_cache_only(tas_priv->regmap, true); + + return 0; +} + +#define TAS2783_PROBE_TIMEOUT_MS 5000 + +static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + unsigned long time; + + if (!tas_priv->first_hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(TAS2783_PROBE_TIMEOUT_MS)); + if (!time) { + dev_err(&slave->dev, "Init not complete, timed out\n"); + sdw_show_ping_status(slave->bus, true); + + return -ETIMEDOUT; + } + +regmap_sync: + slave->unattach_request = 0; + regcache_cache_only(tas_priv->regmap, false); + regcache_sync(tas_priv->regmap); + + return 0; +} + +static const struct dev_pm_ops tas2783_sdca_pm = { + SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume) + RUNTIME_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume, NULL) +}; + +static struct sdw_driver tasdevice_sdw_driver = { + .driver = { + .name = "slave-tas2783", + .pm = &tas2783_sdca_pm, + }, + .probe = tasdevice_sdw_probe, + .remove = tasdevice_sdw_remove, + .ops = &tasdevice_sdw_ops, + .id_table = tasdevice_sdw_id, +}; + +module_sdw_driver(tasdevice_sdw_driver); + +MODULE_AUTHOR("Baojun Xu <baojun.xu(a)ti.com>"); +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000000..631776dcec4c --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier + * + * Copyright (C) 2023 - 2024 Texas Instruments Incorporated + * https://www.ti.com + * + * Author: Baojun Xu <baojun.xu(a)ti.com> + * Shenghao Ding <shenghao-ding(a)ti.com> + */ + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +/* Unique id start */ +#define TAS2783_UNIQUE_ID_BASE 0x08 +#define TAS2783_MAX_DEV_NUM 8 + +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) + +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* BOOK, PAGE Control Register */ +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 + \ + (page * 128) + reg) + +/*Software Reset */ +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0x00, 0x01) +#define TAS2873_REG_SWRESET_MASK BIT(0) +#define TAS2873_REG_SWRESET_RESET BIT(0) + +#define TAS2873_REG_PWR_CTRL TASDEVICE_REG(0x0, 0x00, 0x02) +#define TAS2783_REG_AEF_MASK GENMASK(4, 3) +#define TAS2783_REG_AEF_ACTIVE 0 +#define TAS2783_REG_AEF_INACTIVE GENMASK(4, 3) +#define TAS2783_REG_PWR_MODE_MASK GENMASK(2, 0) +#define TAS2783_REG_PWR_MODE_ACTIVE 0 +#define TAS2783_REG_PWR_MODE_SW_PWD BIT(1) + +#define TAS2783_REG_TDM_RX_CFG TASDEVICE_REG(0x0, 0x00, 0x0a) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1a) +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +/* Calibration data */ +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74) +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14) +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c) +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x13, 0x70) +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c) + +/* TAS2783 SDCA Control - function number */ +#define TAS2783_FUNC_TYPE_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_FU23 0x02 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_FU_VOLUME 0x02 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define TAS2783_DEVICE_CHANNEL_LEFT 1 +#define TAS2783_DEVICE_CHANNEL_RIGHT 2 +#define TAS2783_DSPFW_FILENAME_LEN 64 + +#define TAS2783_MAX_CALIDATA_SIZE 256 + +struct tas2783_firmware_node { + unsigned int vendor_id; + unsigned int file_id; + unsigned int version_id; + unsigned int length; + unsigned int download_addr; +}; + +struct calibration_data { + unsigned long total_sz; + unsigned char data[TAS2783_MAX_CALIDATA_SIZE]; +}; + +struct tasdevice_priv { + struct snd_soc_component *component; + struct sdw_slave *sdw_peripheral; + enum sdw_slave_status status; + struct sdw_bus_params params; + struct regmap *regmap; + struct device *dev; + unsigned char dspfw_binaryname[TAS2783_DSPFW_FILENAME_LEN]; + unsigned char dev_name[32]; + unsigned int chip_id; + bool pstream; + bool hw_init; + bool first_hw_init; +}; + +#endif /*__TAS2783_H__ */ -- 2.34.1

4 6

[PATCH] ALSA: core: add kunitconfig
by Takashi Sakamoto 17 Mar '24

17 Mar '24

It is helpful to add .kunitconfig if we work with the tools provided by KUnit project. The file describes the series of kernel configurations to satisfy the dependency to build the target test. For example: $ ./tools/testing/kunit/kunit.py run --arch=arm64 --cross_compile=aarch64-linux-gnu- --kunitconfig=sound/core/ [11:35:13] Configuring KUnit Kernel ... Regenerating .config ... Populating config with: $ make ARCH=arm64 O=.kunit olddefconfig CROSS_COMPILE=aarch64-linux-gnu- [11:35:19] Building KUnit Kernel ... Populating config with: $ make ARCH=arm64 O=.kunit olddefconfig CROSS_COMPILE=aarch64-linux-gnu- Building with: $ make ARCH=arm64 O=.kunit --jobs=8 CROSS_COMPILE=aarch64-linux-gnu- [11:37:35] Starting KUnit Kernel (1/1)... [11:37:35] ============================================================ Running tests with: $ qemu-system-aarch64 -nodefaults -m 1024 -kernel .kunit/arch/arm64/boot/Image.gz -append 'kunit.enable=1 console=ttyAMA0 kunit_shutdown=reboot' -no-reboot -nographic -serial stdio -machine virt -cpu max,pauth-impdef=on [11:37:35] ============== sound-core-test (10 subtests) =============== [11:37:35] [PASSED] test_phys_format_size [11:37:35] [PASSED] test_format_width [11:37:35] [PASSED] test_format_endianness [11:37:35] [PASSED] test_format_signed [11:37:35] [PASSED] test_format_fill_silence [11:37:35] [PASSED] test_playback_avail [11:37:35] [PASSED] test_capture_avail [11:37:35] [PASSED] test_card_set_id [11:37:35] [PASSED] test_pcm_format_name [11:37:35] [PASSED] test_card_add_component [11:37:35] ================= [PASSED] sound-core-test ================= [11:37:35] ============================================================ [11:37:35] Testing complete. Ran 10 tests: passed: 10 [11:37:35] Elapsed time: 142.333s total, 5.617s configuring, 136.047s building, 0.630s running Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- sound/core/.kunitconfig | 5 +++++ 1 file changed, 5 insertions(+) create mode 100644 sound/core/.kunitconfig diff --git a/sound/core/.kunitconfig b/sound/core/.kunitconfig new file mode 100644 index 000000000000..440f974ba0b7 --- /dev/null +++ b/sound/core/.kunitconfig @@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_PCM=y +CONFIG_SND_CORE_TEST=y -- 2.43.0

2 1

[PATCH] ALSA: hda/realtek: add in quirk for Acer Swift Go 16 - SFG16-71
by Ian Murphy 17 Mar '24

17 Mar '24

Keyboard has an LED that is ON/OFF when mic is muted/active - LED is controlled by GPIO pin - Patch enables led to appear in /sys/class/leds/ as hda::micmute - Enables LED when mic is MUTED - Disables LED when mic is active Signed-off-by: Ian Murphy <iano200(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a91d5ec29bfb..05c685485606 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6891,6 +6891,13 @@ static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc, comp_generic_fixup(cdc, action, "i2c", "INT8866", "-%s:00", 1); } +static void alc256_fixup_acer_sfg16_micmute_led(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + alc_fixup_hp_gpio_led(codec, action, 0, 0x04); +} + + /* for alc295_fixup_hp_top_speakers */ #include "hp_x360_helper.c" @@ -7374,6 +7381,7 @@ enum { ALC289_FIXUP_DELL_CS35L41_SPI_2, ALC294_FIXUP_CS35L41_I2C_2, ALC245_FIXUP_CS35L56_SPI_4_HP_GPIO_LED, + ALC256_FIXUP_ACER_SFG16_MICMUTE_LED, }; /* A special fixup for Lenovo C940 and Yoga Duet 7; @@ -9569,6 +9577,10 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC285_FIXUP_HP_GPIO_LED, }, + [ALC256_FIXUP_ACER_SFG16_MICMUTE_LED] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc256_fixup_acer_sfg16_micmute_led, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -9612,6 +9624,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x1430, "Acer TravelMate B311R-31", ALC256_FIXUP_ACER_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1025, 0x1466, "Acer Aspire A515-56", ALC255_FIXUP_ACER_HEADPHONE_AND_MIC), SND_PCI_QUIRK(0x1025, 0x1534, "Acer Predator PH315-54", ALC255_FIXUP_ACER_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1025, 0x169a, "Acer Swift SFG16", ALC256_FIXUP_ACER_SFG16_MICMUTE_LED), SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), SND_PCI_QUIRK(0x1028, 0x053c, "Dell Latitude E5430", ALC292_FIXUP_DELL_E7X), SND_PCI_QUIRK(0x1028, 0x054b, "Dell XPS one 2710", ALC275_FIXUP_DELL_XPS), -- 2.44.0

2 1

chore: Use actions/checkout@v4
by GitHub pull_request - opened 16 Mar '24

16 Mar '24

alsa-project/alsa-utils pull request #259 was opened from Korilakkuma: Refer to https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-…. > Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3. Request URL : https://github.com/alsa-project/alsa-utils/pull/259 Patch URL : https://github.com/alsa-project/alsa-utils/pull/259.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

GitHub Actions: Use actions/checkout@v4
by GitHub pull_request - opened 16 Mar '24

16 Mar '24

alsa-project/alsa-lib pull request #390 was opened from ryandesign: Fixes: #389 Request URL : https://github.com/alsa-project/alsa-lib/pull/390 Patch URL : https://github.com/alsa-project/alsa-lib/pull/390.patch Repository URL: https://github.com/alsa-project/alsa-lib

1 0

Linux 6.9 pre-rc1 might have broken UCM matching for USB devices
by GitHub issues - edited 15 Mar '24

15 Mar '24

alsa-project/alsa-ucm-conf issue #404 was edited from pinkflames: While testing Torvalds' master branch of Linux which will become 6.9-rc1 eventually, I have stumbled upon PipeWire/WirePlumber apparently no longer applying the UCM profile for my USB connected on-board audio controller. Git bisection leads to the following commit: torvalds/linux@1601cd53c7e3197181277326dbfc131d20a74e46 . It's possible that I'm wrong in concluding that the issue is UCM no longer applying/matching but that's my best guess looking at seemingly ACP named devices and the lack of any `ucm` strings in the output of pw-dump, when the regression is present. Since this is likely a kernel regression, I'll be reporting that to the [kernel bugzilla](https://bugzilla.kernel.org/show_bug.cgi?id=218605), too, but I thought alsa-ucm-conf might be interested in this change as well. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/404 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Linux 6.9 pre-rc1 might have broken UCM matching
by GitHub issues - edited 15 Mar '24

15 Mar '24

alsa-project/alsa-ucm-conf issue #404 was edited from pinkflames: While testing Torvalds' master branch of Linux which will become 6.9-rc1 eventually, I have stumbled upon PipeWire/WirePlumber apparently no longer applying the UCM profile for my USB connected on-board audio controller. Git bisection leads to the following commit: torvalds/linux@1601cd53c7e3197181277326dbfc131d20a74e46 . It's possible that I'm wrong in concluding that the issue is UCM no longer applying/matching but that's my best guess looking at seemingly ACP named devices and the lack of any `ucm` strings in the output of pw-dump, when the regression is present. Since this is likely a kernel regression, I'll be reporting that to the [kernel bugzilla](https://bugzilla.kernel.org/show_bug.cgi?id=218605), too, but I thought alsa-ucm-conf might be interested in this change as well. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/404 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Linux 6.9 pre-rc1 might have broken UCM matching
by GitHub issues - opened 15 Mar '24

15 Mar '24

alsa-project/alsa-ucm-conf issue #404 was opened from pinkflames: While testing Torvalds' master branch of Linux which will become 6.9-rc1 eventually, I have stumbled upon PipeWire/WirePlumber apparently no longer applying the UCM profile for my USB connected on-board audio controller. Git bisection leads to the following commit: torvalds/linux@1601cd53c7e3197181277326dbfc131d20a74e46 . It's possible that I'm wrong in concluding that the issue is UCM no longer applying/matching but that's my best guess looking at seemingly ACP named devices and the lack of any `ucm` strings in the output of pw-dump, when the regression is present. Since this is likely a kernel regression, I'll be reporting that to the kernel bugzilla, too, but I thought alsa-ucm-conf might be interested in this change as well. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/404 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] ALSA: hda/realtek: Add quirk for Lenovo Yoga 9 14IMH9
by i＠jichi.ca 15 Mar '24

15 Mar '24

From: Jichi Zhang <i(a)jichi.ca> The speakers on the Lenovo Yoga 9 14IMH9 are similar to previous generations such as the 14IAP7, and the bass speakers can be fixed using similar methods with one caveat: 14IMH9 uses CS35L41 amplifiers which need to be activated seperately. Signed-off-by: Jichi Zhang <i(a)jichi.ca> --- sound/pci/hda/patch_realtek.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b6cd13b17..6288d837a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7360,6 +7384,7 @@ enum { ALC287_FIXUP_LEGION_16ITHG6, ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK, ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN, + ALC287_FIXUP_YOGA9_14IMH9_BASS_SPK_PIN, ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS, ALC236_FIXUP_DELL_DUAL_CODECS, ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI, @@ -9490,6 +9515,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK, }, + [ALC287_FIXUP_YOGA9_14IMH9_BASS_SPK_PIN] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc287_fixup_yoga9_14iap7_bass_spk_pin, + .chained = true, + .chain_id = ALC287_FIXUP_CS35L41_I2C_2, + }, [ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS] = { .type = HDA_FIXUP_FUNC, .v.func = alc295_fixup_dell_inspiron_top_speakers, @@ -10270,6 +10301,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x38c3, "Y980 DUAL", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x38cb, "Y790 YG DUAL", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x38cd, "Y790 VECO DUAL", ALC287_FIXUP_TAS2781_I2C), + SND_PCI_QUIRK(0x17aa, 0x38d2, "Lenovo Yoga 9 14IMH9", ALC287_FIXUP_YOGA9_14IMH9_BASS_SPK_PIN), + SND_PCI_QUIRK(0x17aa, 0x38d7, "Lenovo Yoga 9 14IMH9", ALC287_FIXUP_YOGA9_14IMH9_BASS_SPK_PIN), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI), -- 2.44.0

2 1