- Alsa-devel - mailman.alsa-project.org

[PATCH 0/4] ASoC: SOF: add missing MODULE_DESCRIPTION
by Pierre-Louis Bossart 29 May '24

29 May '24

'make W=1' now reports missing MODULE_DESCRIPTION lines. This patchset cleans-up all the module definitions and adds MODULE_DESCRIPTION lines as needed. Pierre-Louis Bossart (4): ASoC: SOF: stream-ipc: remove unnecessary MODULE_LICENSE ASoC: SOF: AMD: group all module related information ASoC: SOF: reorder MODULE_ definitions ASoC: SOF: add missing MODULE_DESCRIPTION() sound/soc/sof/amd/acp-common.c | 4 ++-- sound/soc/sof/amd/acp.c | 2 +- sound/soc/sof/amd/acp63.c | 4 ---- sound/soc/sof/amd/pci-acp63.c | 1 + sound/soc/sof/amd/pci-rmb.c | 1 + sound/soc/sof/amd/pci-rn.c | 1 + sound/soc/sof/amd/pci-vangogh.c | 1 + sound/soc/sof/amd/rembrandt.c | 4 ---- sound/soc/sof/amd/renoir.c | 4 ---- sound/soc/sof/amd/vangogh.c | 4 ---- sound/soc/sof/core.c | 2 +- sound/soc/sof/imx/imx-common.c | 1 + sound/soc/sof/imx/imx8.c | 3 ++- sound/soc/sof/imx/imx8m.c | 3 ++- sound/soc/sof/imx/imx8ulp.c | 3 ++- sound/soc/sof/intel/atom.c | 1 + sound/soc/sof/intel/bdw.c | 1 + sound/soc/sof/intel/byt.c | 1 + sound/soc/sof/intel/hda-codec.c | 1 + sound/soc/sof/intel/hda-ctrl.c | 1 + sound/soc/sof/intel/hda-mlink.c | 1 + sound/soc/sof/intel/hda.c | 1 + sound/soc/sof/intel/pci-apl.c | 1 + sound/soc/sof/intel/pci-cnl.c | 1 + sound/soc/sof/intel/pci-icl.c | 1 + sound/soc/sof/intel/pci-lnl.c | 1 + sound/soc/sof/intel/pci-mtl.c | 1 + sound/soc/sof/intel/pci-skl.c | 1 + sound/soc/sof/intel/pci-tgl.c | 1 + sound/soc/sof/intel/pci-tng.c | 1 + sound/soc/sof/mediatek/mt8186/mt8186.c | 3 ++- sound/soc/sof/mediatek/mt8195/mt8195.c | 3 ++- sound/soc/sof/mediatek/mtk-adsp-common.c | 1 + sound/soc/sof/nocodec.c | 2 +- sound/soc/sof/sof-acpi-dev.c | 1 + sound/soc/sof/sof-client-ipc-flood-test.c | 2 +- sound/soc/sof/sof-client-ipc-kernel-injector.c | 2 +- sound/soc/sof/sof-client-ipc-msg-injector.c | 2 +- sound/soc/sof/sof-client-probes.c | 2 +- sound/soc/sof/sof-of-dev.c | 1 + sound/soc/sof/sof-pci-dev.c | 1 + sound/soc/sof/sof-utils.c | 1 + sound/soc/sof/stream-ipc.c | 2 -- sound/soc/sof/xtensa/core.c | 2 +- 44 files changed, 45 insertions(+), 33 deletions(-) -- 2.43.0

2 5

[tiwai-sound:for-next 9/10] sound/core/ump.c:694:6: warning: variable 'type' is uninitialized when used here
by kernel test robot 29 May '24

29 May '24

tree: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git for-next head: e472ffe6ae48ba80461ff1a7bb40f73665a856f0 commit: 42db3930d4d7384d4e241c928e8cb2a0cdc5589c [9/10] ALSA: ump: Don't accept an invalid UMP protocol number config: i386-randconfig-011-20240529 (https://download.01.org/0day-ci/archive/20240530/202405300035.Fz3pTUG4-lkp@…) compiler: clang version 18.1.5 (https://github.com/llvm/llvm-project 617a15a9eac96088ae5e9134248d8236e34b91b1) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240530/202405300035.Fz3pTUG4-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202405300035.Fz3pTUG4-lkp@intel.com/ All warnings (new ones prefixed by >>): >> sound/core/ump.c:694:6: warning: variable 'type' is uninitialized when used here [-Wuninitialized] 694 | if (type != SNDRV_UMP_EP_INFO_PROTO_MIDI1 && | ^~~~ sound/core/ump.c:688:19: note: initialize the variable 'type' to silence this warning 688 | unsigned int type; | ^ | = 0 1 warning generated. vim +/type +694 sound/core/ump.c 678 679 /** 680 * snd_ump_switch_protocol - switch MIDI protocol 681 * @ump: UMP endpoint 682 * @protocol: protocol to switch to 683 * 684 * Returns 1 if the protocol is actually switched, 0 if unchanged 685 */ 686 int snd_ump_switch_protocol(struct snd_ump_endpoint *ump, unsigned int protocol) 687 { 688 unsigned int type; 689 690 protocol &= ump->info.protocol_caps; 691 if (protocol == ump->info.protocol) 692 return 0; 693 > 694 if (type != SNDRV_UMP_EP_INFO_PROTO_MIDI1 && 695 type != SNDRV_UMP_EP_INFO_PROTO_MIDI2) 696 return 0; 697 698 ump->info.protocol = protocol; 699 ump_dbg(ump, "New protocol = %x (caps = %x)\n", 700 protocol, ump->info.protocol_caps); 701 seq_notify_protocol(ump); 702 return 1; 703 } 704 EXPORT_SYMBOL_GPL(snd_ump_switch_protocol); 705 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH v3] ASoc: tas2781: Enable RCA-based playback without DSP firmware download
by Shenghao Ding 29 May '24

29 May '24

In only RCA(Reconfigurable Architecture) binary case, no DSP program will be working inside tas2563/tas2781, that is dsp-bypass mode, do not support speaker protection, and audio acoustic algorithms in this mode. Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v3: - Add description on RCA is Reconfigurable Architecture. - Add the description on enabling - Reword the commit - Remove question mark in the comments. - Add spaces in comments. v2: - Correct comment. - Add Fixes. - Move header file to the first. v1: - Split out the different logical changes into different patches. - rename tasdevice_dsp_fw_state -> tasdevice_fw_state, the fw are not only DSP fw, but also RCA(Reconfigurable data, such as acoustic data and register setting, etc). - Add TASDEVICE_RCA_FW_OK in tasdevice_fw_state to identify the state that only RCA binary file has been download successfully, but DSP fw is not loaded or loading failure. - Add the this strategy into tasdevice_tuning_switch. - If one side of the if/else has a braces both should in tasdevice_tuning_switch. - Identify whehter both RCA and DSP have been loaded or only RCA has been loaded in tasdevice_fw_ready. - Add check fw load status in tasdevice_startup. - remove ret in tasdevice_startup to make the code neater. --- include/sound/tas2781-dsp.h | 3 ++- sound/soc/codecs/tas2781-fmwlib.c | 16 ++++++++++----- sound/soc/codecs/tas2781-i2c.c | 33 ++++++++++++++++++++----------- 3 files changed, 34 insertions(+), 18 deletions(-) diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index 7fba7ea26a4b..92d68ca5eafb 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -117,10 +117,11 @@ struct tasdevice_fw { struct device *dev; }; -enum tasdevice_dsp_fw_state { +enum tasdevice_fw_state { TASDEVICE_DSP_FW_NONE = 0, TASDEVICE_DSP_FW_PENDING, TASDEVICE_DSP_FW_FAIL, + TASDEVICE_RCA_FW_OK, TASDEVICE_DSP_FW_ALL_OK, }; diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 265a8ca25cbb..5db1a0ac6036 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2324,14 +2324,19 @@ void tasdevice_tuning_switch(void *context, int state) struct tasdevice_fw *tas_fmw = tas_priv->fmw; int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); + /* + * Only RCA-based Playback can still work with no dsp program running + * inside the chip? + */ + if (!(tas_priv->fw_state == TASDEVICE_RCA_FW_OK || + tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK)) { + dev_err(tas_priv->dev, "No firmware loaded\n"); return; } if (state == 0) { - if (tas_priv->cur_prog < tas_fmw->nr_programs) { - /*dsp mode or tuning mode*/ + if (tas_fmw && tas_priv->cur_prog < tas_fmw->nr_programs) { + /* dsp mode or tuning mode */ profile_cfg_id = tas_priv->rcabin.profile_cfg_id; tasdevice_select_tuningprm_cfg(tas_priv, tas_priv->cur_prog, tas_priv->cur_conf, @@ -2340,9 +2345,10 @@ void tasdevice_tuning_switch(void *context, int state) tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_POWER_UP); - } else + } else { tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_SHUTDOWN); + } } EXPORT_SYMBOL_NS_GPL(tasdevice_tuning_switch, SND_SOC_TAS2781_FMWLIB); diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9350972dfefe..9b85a44511c2 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -380,23 +380,33 @@ static void tasdevice_fw_ready(const struct firmware *fmw, mutex_lock(&tas_priv->codec_lock); ret = tasdevice_rca_parser(tas_priv, fmw); - if (ret) + if (ret) { + tasdevice_config_info_remove(tas_priv); goto out; + } tasdevice_create_control(tas_priv); tasdevice_dsp_remove(tas_priv); tasdevice_calbin_remove(tas_priv); - tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + tas_priv->fw_state = TASDEVICE_RCA_FW_OK; scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", tas_priv->dev_name); + ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", tas_priv->coef_binaryname); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; goto out; } - tasdevice_dsp_create_ctrls(tas_priv); + + /* + * If no dsp-related kcontrol created, the dsp resource will be freed. + */ + ret = tasdevice_dsp_create_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dsp controls error\n"); + goto out; + } tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; @@ -417,9 +427,8 @@ static void tasdevice_fw_ready(const struct firmware *fmw, tasdevice_prmg_load(tas_priv, 0); tas_priv->cur_prog = 0; out: - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - /*If DSP FW fail, kcontrol won't be created */ - tasdevice_config_info_remove(tas_priv); + if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { + /*If DSP FW fail, DSP kcontrol won't be created */ tasdevice_dsp_remove(tas_priv); } mutex_unlock(&tas_priv->codec_lock); @@ -466,14 +475,14 @@ static int tasdevice_startup(struct snd_pcm_substream *substream, { struct snd_soc_component *codec = dai->component; struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); - int ret = 0; - if (tas_priv->fw_state != TASDEVICE_DSP_FW_ALL_OK) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); - ret = -EINVAL; + if (!(tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK || + tas_priv->fw_state == TASDEVICE_RCA_FW_OK)) { + dev_err(tas_priv->dev, "Bin file not loaded\n"); + return -EINVAL; } - return ret; + return 0; } static int tasdevice_hw_params(struct snd_pcm_substream *substream, -- 2.34.1

3 2

[PATCH] ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency
by Pierre-Louis Bossart 29 May '24

29 May '24

The addition of the Cirrus Logic 'sidecar' amps adds a dependency on SPI_MASTER. Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for SND_SOC_CS35L56_SPI Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SPI_MASTER [=n] && (SOUNDWIRE [=y] || !SOUNDWIRE [=y]) Selected by [y]: - SND_SOC_INTEL_SOUNDWIRE_SOF_MACH [=y] && SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] && SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && I2C [=y] && ACPI [=y] && (MFD_INTEL_LPSS [=y] || COMPILE_TEST [=n]) && (SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES [=y] || COMPILE_TEST [=n]) && SOUNDWIRE [=y] Fixes: b831b4dca48d ("ASoC: intel: sof_sdw: Add support for cs42l43-cs35l56 sidecar amps") Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202405140758.o2HY4nYD-lkp@intel.com/ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- sound/soc/intel/boards/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index 3ed81ab649c5..4e0586034de4 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -652,7 +652,7 @@ if SND_SOC_SOF_INTEL_SOUNDWIRE config SND_SOC_INTEL_SOUNDWIRE_SOF_MACH tristate "SoundWire generic machine driver" - depends on I2C && ACPI + depends on I2C && SPI_MASTER && ACPI depends on MFD_INTEL_LPSS || COMPILE_TEST depends on SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES || COMPILE_TEST depends on SOUNDWIRE -- 2.43.0

3 2

[PATCH v2] ASoc: tas2781: Playback can work when only RCA binary loading without dsp firmware loading
by Shenghao Ding 29 May '24

29 May '24

In only RCA binary loading case, only default dsp program inside the chip will be work. Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - correct comment. - Add Fixes. - Move header file to the first. v1: - Split out the different logical changes into different patches. - rename tasdevice_dsp_fw_state -> tasdevice_fw_state, the fw are not only dsp fw, but also RCA(Reconfigurable data, such as acoustic data and register setting, etc). - Add TASDEVICE_RCA_FW_OK in tasdevice_fw_state to identify the state that only RCA binary file has been download successfully, but dsp fw is not loaded or loading failure. - Add the this strategy into tasdevice_tuning_switch. - If one side of the if/else has a braces both should in tasdevice_tuning_switch. - Identify whehter both RCA and DSP have been loaded or only RCA has been loaded in tasdevice_fw_ready. - Add check fw load status in tasdevice_startup. - remove ret in tasdevice_startup to make th code neater. --- include/sound/tas2781-dsp.h | 3 ++- sound/soc/codecs/tas2781-fmwlib.c | 14 ++++++++++---- sound/soc/codecs/tas2781-i2c.c | 30 ++++++++++++++++++------------ 3 files changed, 30 insertions(+), 17 deletions(-) diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index 7fba7ea26a4b..92d68ca5eafb 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -117,10 +117,11 @@ struct tasdevice_fw { struct device *dev; }; -enum tasdevice_dsp_fw_state { +enum tasdevice_fw_state { TASDEVICE_DSP_FW_NONE = 0, TASDEVICE_DSP_FW_PENDING, TASDEVICE_DSP_FW_FAIL, + TASDEVICE_RCA_FW_OK, TASDEVICE_DSP_FW_ALL_OK, }; diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 265a8ca25cbb..cfa022ef4a59 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2324,13 +2324,18 @@ void tasdevice_tuning_switch(void *context, int state) struct tasdevice_fw *tas_fmw = tas_priv->fmw; int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); + /* + * Only RCA file loaded can still work with default dsp program inside + * the chip? + */ + if (!(tas_priv->fw_state == TASDEVICE_RCA_FW_OK || + tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK)) { + dev_err(tas_priv->dev, "No firmware loaded\n"); return; } if (state == 0) { - if (tas_priv->cur_prog < tas_fmw->nr_programs) { + if (tas_fmw && tas_priv->cur_prog < tas_fmw->nr_programs) { /*dsp mode or tuning mode*/ profile_cfg_id = tas_priv->rcabin.profile_cfg_id; tasdevice_select_tuningprm_cfg(tas_priv, @@ -2340,9 +2345,10 @@ void tasdevice_tuning_switch(void *context, int state) tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_POWER_UP); - } else + } else { tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_SHUTDOWN); + } } EXPORT_SYMBOL_NS_GPL(tasdevice_tuning_switch, SND_SOC_TAS2781_FMWLIB); diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9350972dfefe..ccb9313ada9b 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -380,23 +380,30 @@ static void tasdevice_fw_ready(const struct firmware *fmw, mutex_lock(&tas_priv->codec_lock); ret = tasdevice_rca_parser(tas_priv, fmw); - if (ret) + if (ret) { + tasdevice_config_info_remove(tas_priv); goto out; + } tasdevice_create_control(tas_priv); tasdevice_dsp_remove(tas_priv); tasdevice_calbin_remove(tas_priv); - tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + tas_priv->fw_state = TASDEVICE_RCA_FW_OK; scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", tas_priv->dev_name); + ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", tas_priv->coef_binaryname); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; goto out; } - tasdevice_dsp_create_ctrls(tas_priv); + + ret = tasdevice_dsp_create_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dsp controls error\n"); + goto out; + } tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; @@ -417,9 +424,8 @@ static void tasdevice_fw_ready(const struct firmware *fmw, tasdevice_prmg_load(tas_priv, 0); tas_priv->cur_prog = 0; out: - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - /*If DSP FW fail, kcontrol won't be created */ - tasdevice_config_info_remove(tas_priv); + if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { + /*If DSP FW fail, DSP kcontrol won't be created */ tasdevice_dsp_remove(tas_priv); } mutex_unlock(&tas_priv->codec_lock); @@ -466,14 +472,14 @@ static int tasdevice_startup(struct snd_pcm_substream *substream, { struct snd_soc_component *codec = dai->component; struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); - int ret = 0; - if (tas_priv->fw_state != TASDEVICE_DSP_FW_ALL_OK) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); - ret = -EINVAL; + if (!(tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK || + tas_priv->fw_state == TASDEVICE_RCA_FW_OK)) { + dev_err(tas_priv->dev, "Bin file not loaded\n"); + return -EINVAL; } - return ret; + return 0; } static int tasdevice_hw_params(struct snd_pcm_substream *substream, -- 2.34.1

3 3

[PATCH v3 0/2] ASoC: fsl_xcvr: Support i.MX95 platform
by Shengjiu Wang 29 May '24

29 May '24

On i.MX95 wakeup domain, there is one instance of Audio XCVR supporting SPDIF mode with a connection to the Audio XCVR physical interface. changes in v3: - refine the constraint for 'resets', 'clocks', 'interrupts' in document. changes in v2: - Merge patch 1&2, 3&4 from v1 together. - Add more comments in commit message - Add constaint for clocks used on i.mx95 - Add 'select SND_SOC_FSL_UTILS' for compiling issue. Shengjiu Wang (2): ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95 ASoC: fsl_xcvr: Add support for i.MX95 platform .../devicetree/bindings/sound/fsl,xcvr.yaml | 37 ++++- sound/soc/fsl/Kconfig | 1 + sound/soc/fsl/fsl_xcvr.c | 128 ++++++++++++------ sound/soc/fsl/fsl_xcvr.h | 91 +++++++++++++ 4 files changed, 213 insertions(+), 44 deletions(-) -- 2.34.1

3 4

[PATCH v2 0/2] ASoC: fsl_mqs: Add i.MX95 platform support
by Shengjiu Wang 28 May '24

28 May '24

There are two MQS instances on the i.MX95 platform. The definition of bit positions in the control register are different. In order to support these MQS modules, define two compatible strings to distinguish them. changes in v2: - remove "fsl,mqs-ctrl" property - use two compatible strings to distinguish two instances Shengjiu Wang (2): ASoC: dt-bindings: fsl,mqs: Add i.MX95 platform support ASoC: fsl_mqs: Add i.MX95 platform support .../devicetree/bindings/sound/fsl,mqs.yaml | 2 + sound/soc/fsl/fsl_mqs.c | 46 ++++++++++++++++--- 2 files changed, 42 insertions(+), 6 deletions(-) -- 2.34.1

2 3

[PATCH] ALSA/hda: intel-dsp-config: reduce log verbosity
by Pierre-Louis Bossart 28 May '24

28 May '24

The information on PCI class/subclass was interesting in the Skylake timeframe, since the DSP was only enabled on a limited number of platforms. Now most Intel platforms do enable the DSP, so the information is less interesting to log. When a DSP driver is used, the common helper may be called multiple times due to deferred probes, but there's no reason to print the same information multiple times. Using dev_info_once() covers all the existing usages for internal cards with DSPs. External cards don't rely on DSPs so far. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- sound/hda/intel-dsp-config.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index cfdb1b73c88c..537863447358 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -668,7 +668,7 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci) return SND_INTEL_DSP_DRIVER_LEGACY; } - dev_info(&pci->dev, "DSP detected with PCI class/subclass/prog-if info 0x%06x\n", pci->class); + dev_dbg(&pci->dev, "DSP detected with PCI class/subclass/prog-if info 0x%06x\n", pci->class); /* find the configuration for the specific device */ cfg = snd_intel_dsp_find_config(pci, config_table, ARRAY_SIZE(config_table)); @@ -678,12 +678,12 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci) if (cfg->flags & FLAG_SOF) { if (cfg->flags & FLAG_SOF_ONLY_IF_SOUNDWIRE && snd_intel_dsp_check_soundwire(pci) > 0) { - dev_info(&pci->dev, "SoundWire enabled on CannonLake+ platform, using SOF driver\n"); + dev_info_once(&pci->dev, "SoundWire enabled on CannonLake+ platform, using SOF driver\n"); return SND_INTEL_DSP_DRIVER_SOF; } if (cfg->flags & FLAG_SOF_ONLY_IF_DMIC && snd_intel_dsp_check_dmic(pci)) { - dev_info(&pci->dev, "Digital mics found on Skylake+ platform, using SOF driver\n"); + dev_info_once(&pci->dev, "Digital mics found on Skylake+ platform, using SOF driver\n"); return SND_INTEL_DSP_DRIVER_SOF; } if (!(cfg->flags & FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE)) @@ -694,7 +694,7 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci) if (cfg->flags & FLAG_SST) { if (cfg->flags & FLAG_SST_ONLY_IF_DMIC) { if (snd_intel_dsp_check_dmic(pci)) { - dev_info(&pci->dev, "Digital mics found on Skylake+ platform, using SST driver\n"); + dev_info_once(&pci->dev, "Digital mics found on Skylake+ platform, using SST driver\n"); return SND_INTEL_DSP_DRIVER_SST; } } else { -- 2.43.0

2 1

Wcd937x support
by GitHub pull_request - opened 28 May '24

28 May '24

alsa-project/alsa-ucm-conf pull request #421 was opened from mohsRafi: Add WCD937X codec support. This change will add the default, enable/disable codec sequence for Headphone and Mic on WCD937x codec, And move TX1 MODE mixer controller to WCD938x codec sequence. The tx-macro is a common interface for WCD937x and wcd938x and also TX1 MODE setting is not applicable for WCD937x codec. The TX1 MODE mixer controller is derived in WCD938x codec driver, so move the TX1 MODE mixer control to wcd938x. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/421 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/421.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] ASoC: SOF: Intel: hda: print PCI class info only once
by Pierre-Louis Bossart 27 May '24

27 May '24

With the deferred probe mechanism used by the gfx/display subsystem, we see this message repeated for no good reason. Print the information only once. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- sound/soc/sof/intel/hda.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index e6a38de0a0aa..541c6052d4ed 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -783,8 +783,8 @@ int hda_dsp_probe_early(struct snd_sof_dev *sdev) pci->class); return -ENODEV; } - dev_info(sdev->dev, "DSP detected with PCI class/subclass/prog-if 0x%06x\n", - pci->class); + dev_info_once(sdev->dev, "DSP detected with PCI class/subclass/prog-if 0x%06x\n", + pci->class); } chip = get_chip_info(sdev->pdata); -- 2.43.0

1 0