- Alsa-devel - mailman.alsa-project.org

Re: 回覆: CLEVO uses the model name and SSID list of Realtek audio CODEC ALC293 (ALC1220)
by Takashi Iwai 11 Nov '20

11 Nov '20

On Wed, 11 Nov 2020 02:28:50 +0100, Pshou wrote: > > Hi Alsa-devel ML: > > Can you help me add some source code to patch_realtek.c? > > Add some CLEVO SSID in the alc293 (alc1220). > > Best regards > Pshou Applied now with minor coding style fixes. Thanks. Takashi > > -----原始郵件----- > 寄件者: Takashi Iwai <tiwai(a)suse.de> > 寄件日期: 2020年11月10日 15:02 > 收件者: Pshou <pshou(a)realtek.com> > 副本: Kailang <kailang(a)realtek.com> > 主旨: Re: CLEVO uses the model name and SSID list of Realtek audio CODEC ALC293 (ALC1220) > > On Tue, 10 Nov 2020 03:03:38 +0100, > Pshou wrote: > > > > Hi Takashi: > > > > Can you help me add some source code to patch_realtek.c? > > > > Add some CLEVO SSID in the alc293 (alc1220). > > > > Best regards > > > > pshou > > Could you just submit to alsa-devel ML and Cc to me? > A patch has to be submitted to the ML for public review. > > > thanks, > > Takashi > > ------Please consider the environment before printing this e-mail. > [2 0001-Add-alc293-and-alc1220-in-clove.patch <application/octet-stream (base64)>] >

1 0

[PATCH] ASoC: fsl_xcvr: fix break condition
by Viorel Suman (OSS) 10 Nov '20

10 Nov '20

From: Viorel Suman <viorel.suman(a)nxp.com> The break condition copied by mistake as same as loop condition in the previous version, but must be the opposite. So fix it. Signed-off-by: Viorel Suman <viorel.suman(a)nxp.com> --- sound/soc/fsl/fsl_xcvr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index c055179e6d11..2a28810d0e29 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -247,7 +247,7 @@ static int fsl_xcvr_ai_write(struct fsl_xcvr *xcvr, u8 reg, u32 data, bool phy) regmap_write(xcvr->regmap, FSL_XCVR_PHY_AI_CTRL_TOG, idx); ret = regmap_read_poll_timeout(xcvr->regmap, FSL_XCVR_PHY_AI_CTRL, val, - (val & idx) != ((val & tidx) >> 1), + (val & idx) == ((val & tidx) >> 1), 10, 10000); if (ret) dev_err(dev, "AI timeout: failed to set %s reg 0x%02x=0x%08x\n", -- 2.26.2

2 1

[PATCH v5 0/7] Audio Graph Updates
by Sameer Pujar 10 Nov '20

10 Nov '20

This series is a prepraration for using generic graph driver for Tegra210 audio. Tegra audio graph series will be sent in a separate series because it has some dependency over other series for documentation work. This series can focus on the generic ASoC driver updates. Below are the summary of changes done. * Support multiple instances of a component. For example there can be multiple I2S devices which can use the same component driver. * Support open platforms with empty Codec endpoint. Customers can plug their own HW and can populate codec endpoint. * In a component model there can be many components which can be connected together. In such cases Identify no-pcm DPCM DAI links which can be used in BE<->BE connections. * Expose structures or helpers to be re-used by other similar graph drivers. The series is based on following references where DPCM usgae for Tegra Audio and simple-card driver proposal were discussed. * https://lkml.org/lkml/2020/4/30/519 (DPCM for Tegra) * https://lkml.org/lkml/2020/6/27/4 (simple-card driver) Changelog ========= v4 -> v5 -------- * No changes in the core/audio-graph driver patches which are part of the current series. * Dropped Tegra audio patches and doc patches. This will be sent separately once the doc depdendencies are resolved. v3 -> v4 -------- * Added new patches to convert graph.txt and audio-graph-card.txt to corresponding json-schema files. Later these references are used in Tegra audio graph schema. * AHUB component binding docs are updated to reflect the usage of ports/port/endpoint * More common stuff is moved into graph_parse_of() and this is used by both generic and Tegra audio graph. * DT binding for Tegra audio graph is updated to included "ports { }" * As per the suggestion 'void *data' member is dropped from 'asoc_simple_priv' and instead container method is used to maintain required custom data internal to Tegra audio graph. v2 -> v3 -------- * Dropped new compatible addition in generic graph driver after reviewing it with Morimoto-san. Instead added Tegra audio graph driver and new compatibles are added in the same. * Added new patches to expose new members for customization in audio graph driver. * Added new patch for Tegra audio graph driver and related documentation. * Minor change in below commit where mutex version of helper is used "ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM" * DT binding is updated to use the newly exposed compatibles * No changes in other patches v1 -> v2 -------- * Re-organized ports/endpoints description for ADMAIF and XBAR. Updated DT patches accordingly. * After above change, multiple Codec endpoint support is not required and hence dropped for now. This will be considered separately if at all required in future. * Re-ordered patches in the series. Sameer Pujar (7): ASoC: soc-core: Fix component name_prefix parsing ASoC: soc-pcm: Get all BEs along DAPM path ASoC: audio-graph: Use of_node and DAI for DPCM DAI link names ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM ASoC: audio-graph: Support empty Codec endpoint ASoC: audio-graph: Expose new members for asoc_simple_priv ASoC: audio-graph: Expose helpers from audio graph include/sound/graph_card.h | 16 ++++ include/sound/simple_card_utils.h | 3 + include/sound/soc.h | 1 + sound/soc/generic/audio-graph-card.c | 175 ++++++++++++++++++++++++----------- sound/soc/soc-core.c | 3 +- sound/soc/soc-pcm.c | 3 +- 6 files changed, 143 insertions(+), 58 deletions(-) create mode 100644 include/sound/graph_card.h -- 2.7.4

3 10

[PATCH] ASoC: qcom: common: Fix refcounting in qcom_snd_parse_of()
by Dan Carpenter 10 Nov '20

10 Nov '20

There are two issues in this function. 1) We can't drop the refrences on "cpu", "codec" and "platform" before we take the reference. This doesn't cause a problem on the first iteration because those pointers start as NULL so the of_node_put() is a no-op. But on the subsequent iterations, it will lead to a use after free. 2) If the devm_kzalloc() allocation failed then the code returned directly instead of cleaning up. Fixes: c1e6414cdc37 ("ASoC: qcom: common: Fix refcount imbalance on error") Fixes: 1e36ea360ab9 ("ASoC: qcom: common: use modern dai_link style") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- sound/soc/qcom/common.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c index 54660f126d09..09af00700700 100644 --- a/sound/soc/qcom/common.c +++ b/sound/soc/qcom/common.c @@ -58,7 +58,7 @@ int qcom_snd_parse_of(struct snd_soc_card *card) dlc = devm_kzalloc(dev, 2 * sizeof(*dlc), GFP_KERNEL); if (!dlc) { ret = -ENOMEM; - goto err; + goto err_put_np; } link->cpus = &dlc[0]; @@ -70,7 +70,7 @@ int qcom_snd_parse_of(struct snd_soc_card *card) ret = of_property_read_string(np, "link-name", &link->name); if (ret) { dev_err(card->dev, "error getting codec dai_link name\n"); - goto err; + goto err_put_np; } cpu = of_get_child_by_name(np, "cpu"); @@ -130,8 +130,10 @@ int qcom_snd_parse_of(struct snd_soc_card *card) } else { /* DPCM frontend */ dlc = devm_kzalloc(dev, sizeof(*dlc), GFP_KERNEL); - if (!dlc) - return -ENOMEM; + if (!dlc) { + ret = -ENOMEM; + goto err; + } link->codecs = dlc; link->num_codecs = 1; @@ -158,10 +160,11 @@ int qcom_snd_parse_of(struct snd_soc_card *card) return 0; err: - of_node_put(np); of_node_put(cpu); of_node_put(codec); of_node_put(platform); +err_put_np: + of_node_put(np); return ret; } EXPORT_SYMBOL(qcom_snd_parse_of); -- 2.28.0

2 1

[PATCH v6 0/2] Modify documentation and machine driver for SC7180 sound card
by Ajye Huang 10 Nov '20

10 Nov '20

Note: - The patch is made by the collaboration of Ajye Huang <ajye_huang(a)compal.corp-partner.google.com> Cheng-Yi Chiang <cychiang(a)chromium.org> v6: - Documentation: Addressed suggestions from Rob Herring. - Define "maxItems: 1" in dmic-gpios property. - Only keep one example and add dmic-gpios property in. v5: - Machine driver: - Fix a format string warning (Reported-by: kernel test robot <lkp(a)intel.com>). detailed info at https://lore.kernel.org/patchwork/patch/1331087/ v4: - Machine driver: Addressed suggestions from Tzung-Bi. - Remove redundant judgments in dmic_set() and dmic_get(). - Remove 1 level indent of judgment of IS_ERR(data->dmic_sel). v3: - Machine driver: Addressed suggestions from Tzung-Bi. - Move variables "dmic_switch" and "dmic_sel" into struct sc7180_snd_data. - Remove redundant judgments in dmic_set(). v2: - Documentation: Modify the dimc-gpios property description and examples. - Machine driver: - Remove "qcom,sc7180-sndcard-rt5682-m98357-2mic" compatible - See gpio property and use anadditional control. Thanks for the review! Ajye Huang (2): ASoC: google: dt-bindings: modify machine bindings for two MICs case ASoC: qcom: sc7180: Modify machine driver for 2mic .../bindings/sound/google,sc7180-trogdor.yaml | 8 ++- sound/soc/qcom/sc7180.c | 61 +++++++++++++++++++ 2 files changed, 68 insertions(+), 1 deletion(-) -- 2.25.1

4 8

[PATCH v1 0/2] Modify documentation and machine driver for SC7180 sound card
by Ajye Huang 10 Nov '20

10 Nov '20

Note: - This patch depends on this patch series ASoC: qcom: dt-bindings: Add sc7180 machine bindings https://patchwork.kernel.org/patch/11773221/ ASoC: qcom: sc7180: Add machine driver for sound card registration https://patchwork.kernel.org/patch/11773223/ - The patch is made by the collaboration of Ajye Huang <ajye_huang(a)compal.corp-partner.google.com> Cheng-Yi Chiang <cychiang(a)chromium.org> Thanks for the review! Ajye Huang (2): ASoC: qcom: dt-bindings: Modify sc7180 machine bindings ASoC: qcom: sc7180: Modify machine driver for 2mic .../bindings/sound/qcom,sc7180.yaml | 64 ++++++++++++++++++- sound/soc/qcom/sc7180.c | 60 +++++++++++++++++ 2 files changed, 123 insertions(+), 1 deletion(-) -- 2.25.1

4 8

[PATCH v2 0/2] ASoC: soc-compress: tidyup STREAM vs COMPRESS
by Kuninori Morimoto 10 Nov '20

10 Nov '20

Hi Mark These are v2 of tidyup patch-set for SNDRV_PCM_STREAM_xxx and SND_COMPRESS_xxx. soc-compress is using both SNDRV_PCM_STREAM_xxx and SND_COMPRESS_xxx, but mixed use. This is confusable, but no problem. Because these are defined as UAPI and are using same value. This patch-set make sure these are same value. v1 -> v2 - checks COMPRESS vs PCM_STREAM by using BUILD_BUG_ON() Link: https://lore.kernel.org/r/87wnzcfnkk.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (2): ASoC: soc-compress: tidyup STREAM vs COMPRESS ASoC: soc-compress: assume SNDRV_PCM_STREAM_xxx and SND_COMPRESS_xxx are same sound/soc/soc-compress.c | 63 +++++++++++++++------------------------- 1 file changed, 23 insertions(+), 40 deletions(-) -- 2.25.1

2 7

[PATCH] ASoC: nau8315: add codec driver
by David Lin 10 Nov '20

10 Nov '20

Add codec driver for Nuvoton NAU8315. Signed-off-by: David Lin <CTLIN0(a)nuvoton.com> --- .../devicetree/bindings/sound/nau8315.txt | 18 ++ sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/nau8315.c | 166 ++++++++++++++++++ 4 files changed, 191 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nau8315.txt create mode 100644 sound/soc/codecs/nau8315.c diff --git a/Documentation/devicetree/bindings/sound/nau8315.txt b/Documentation/devicetree/bindings/sound/nau8315.txt new file mode 100644 index 000000000000..6eaec46f384c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8315.txt @@ -0,0 +1,18 @@ +Nuvoton NAU8315 Mono Class-D Amplifier + +Required properties: +- compatible : "nuvoton,nau8315" + +Optional properties: +- enable-gpios : GPIO specifier for the chip's device enable input(EN) pin. + If this option is not specified then driver does not manage + the pin state (e.g. chip is always on). + +Example: + +#include <dt-bindings/gpio/gpio.h> + +nau8315 { + compatible = "nuvoton,nau8315"; + enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; +}; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 5791b7056af6..2b6eceb3573c 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -130,6 +130,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MT6358 imply SND_SOC_MT6359 imply SND_SOC_MT6660 + imply SND_SOC_NAU8315 imply SND_SOC_NAU8540 imply SND_SOC_NAU8810 imply SND_SOC_NAU8822 @@ -1760,6 +1761,10 @@ config SND_SOC_MT6660 Select N if you don't have MT6660 on board. Select M to build this as module. +config SND_SOC_NAU8315 + tristate "Nuvoton Technology Corporation NAU8315 CODEC" + depends on GPIOLIB + config SND_SOC_NAU8540 tristate "Nuvoton Technology Corporation NAU85L40 CODEC" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 11ce98c25d6c..144d9256d4d5 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -129,6 +129,7 @@ snd-soc-mt6351-objs := mt6351.o snd-soc-mt6358-objs := mt6358.o snd-soc-mt6359-objs := mt6359.o snd-soc-mt6660-objs := mt6660.o +snd-soc-nau8315-objs := nau8315.o snd-soc-nau8540-objs := nau8540.o snd-soc-nau8810-objs := nau8810.o snd-soc-nau8822-objs := nau8822.o @@ -438,6 +439,7 @@ obj-$(CONFIG_SND_SOC_MT6351) += snd-soc-mt6351.o obj-$(CONFIG_SND_SOC_MT6358) += snd-soc-mt6358.o obj-$(CONFIG_SND_SOC_MT6359) += snd-soc-mt6359.o obj-$(CONFIG_SND_SOC_MT6660) += snd-soc-mt6660.o +obj-$(CONFIG_SND_SOC_NAU8315) += snd-soc-nau8315.o obj-$(CONFIG_SND_SOC_NAU8540) += snd-soc-nau8540.o obj-$(CONFIG_SND_SOC_NAU8810) += snd-soc-nau8810.o obj-$(CONFIG_SND_SOC_NAU8822) += snd-soc-nau8822.o diff --git a/sound/soc/codecs/nau8315.c b/sound/soc/codecs/nau8315.c new file mode 100644 index 000000000000..e6bc5c0a5036 --- /dev/null +++ b/sound/soc/codecs/nau8315.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// nau8315.c -- NAU8315 ALSA SoC Audio Amplifier Driver +// +// Copyright 2020 Nuvoton Technology Crop. +// +// Author: David Lin <ctlin0(a)nuvoton.com> +// +// Based on MAX98357A.c + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> +#include <sound/soc-dapm.h> + +struct nau8315_priv { + struct gpio_desc *enable; + int enpin_switch; +}; + +static int nau8315_daiops_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct nau8315_priv *nau8315 = + snd_soc_component_get_drvdata(component); + + if (!nau8315->enable) + return 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if (nau8315->enpin_switch) { + gpiod_set_value(nau8315->enable, 1); + dev_dbg(component->dev, "set enable to 1"); + } + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + gpiod_set_value(nau8315->enable, 0); + dev_dbg(component->dev, "set enable to 0"); + break; + } + + return 0; +} + +static int nau8315_enpin_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct nau8315_priv *nau8315 = + snd_soc_component_get_drvdata(component); + + if (event & SND_SOC_DAPM_POST_PMU) + nau8315->enpin_switch = 1; + else if (event & SND_SOC_DAPM_POST_PMD) + nau8315->enpin_switch = 0; + + return 0; +} + +static const struct snd_soc_dapm_widget nau8315_dapm_widgets[] = { + SND_SOC_DAPM_OUTPUT("Speaker"), + SND_SOC_DAPM_OUT_DRV_E("EN_Pin", SND_SOC_NOPM, 0, 0, NULL, 0, + nau8315_enpin_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), +}; + +static const struct snd_soc_dapm_route nau8315_dapm_routes[] = { + {"EN_Pin", NULL, "HiFi Playback"}, + {"Speaker", NULL, "EN_Pin"}, +}; + +static const struct snd_soc_component_driver nau8315_component_driver = { + .dapm_widgets = nau8315_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(nau8315_dapm_widgets), + .dapm_routes = nau8315_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(nau8315_dapm_routes), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct snd_soc_dai_ops nau8315_dai_ops = { + .trigger = nau8315_daiops_trigger, +}; + +#define NAU8315_RATES SNDRV_PCM_RATE_8000_96000 +#define NAU8315_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE) + +static struct snd_soc_dai_driver nau8315_dai_driver = { + .name = "nau8315-hifi", + .playback = { + .stream_name = "HiFi Playback", + .formats = NAU8315_FORMATS, + .rates = NAU8315_RATES, + .channels_min = 1, + .channels_max = 2, + }, + .ops = &nau8315_dai_ops, +}; + +static int nau8315_platform_probe(struct platform_device *pdev) +{ + struct nau8315_priv *nau8315; + + nau8315 = devm_kzalloc(&pdev->dev, sizeof(*nau8315), GFP_KERNEL); + if (!nau8315) + return -ENOMEM; + + nau8315->enable = devm_gpiod_get_optional(&pdev->dev, + "enable", GPIOD_OUT_LOW); + if (IS_ERR(nau8315->enable)) + return PTR_ERR(nau8315->enable); + + dev_set_drvdata(&pdev->dev, nau8315); + + return devm_snd_soc_register_component(&pdev->dev, + &nau8315_component_driver, + &nau8315_dai_driver, 1); +} + +#ifdef CONFIG_OF +static const struct of_device_id nau8315_device_id[] = { + { .compatible = "nuvoton,nau8315" }, + {} +}; +MODULE_DEVICE_TABLE(of, nau8315_device_id); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id nau8315_acpi_match[] = { + { "NVTN2010", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, nau8315_acpi_match); +#endif + +static struct platform_driver nau8315_platform_driver = { + .driver = { + .name = "nau8315", + .of_match_table = of_match_ptr(nau8315_device_id), + .acpi_match_table = ACPI_PTR(nau8315_acpi_match), + }, + .probe = nau8315_platform_probe, +}; +module_platform_driver(nau8315_platform_driver); + +MODULE_DESCRIPTION("ASoC NAU8315 Mono Class-D Amplifier Driver"); +MODULE_AUTHOR("David Lin <ctlin0(a)nuvoton.com>"); +MODULE_LICENSE("GPL v2"); -- 2.25.1

5 11

[PATCH v4 0/9] ASoC: Mediatek: Add support for MT8192 SoC
by Jiaxin Yu 10 Nov '20

10 Nov '20

This series of patches adds support for Mediatek AFE for MT8192 SoC. At the same time, the calibration function of MT6359 is completed with real machine driver. The patch is based on broonie tree "for-next" branch. Change since v3: - use normal conditional statements to improve legiblity in [v3,3/9] - remove mtk_i2s_hd_en_event as there's trace in the core - impove mt8192_i2s_enum and mt8192_adda_enum Change since v2: - split the dai driver files as a separate patch - fix dt-bindings to GPL-2.0-only License - remove unnecessary preperty descriptions such as 'maxItems' Change since v1: - fixed some typos related to dt-bindings in [v1,3/5] and [v1,5/5] - add vendor prefix to the properties, such as "mediatek,apmixedsys" - add a dependency description to indicate the required header files Jiaxin Yu (9): ASoC: mediatek: mt6359: add the calibration functions ASoC: mediatek: mt8192: add platform driver ASoC: mediatek: mt8192: support i2s in platform driver ASoC: mediatek: mt8192: support adda in platform driver ASoC: mediatek: mt8192: support pcm in platform driver ASoC: mediatek: mt8192: support tdm in platform driver dt-bindings: mediatek: mt8192: add audio afe document ASoC: mediatek: mt8192: add machine driver with mt6359, rt1015 and rt5682 dt-bindings: mediatek: mt8192: add mt8192-mt6358-rt1015-rt5682 document .../bindings/sound/mt8192-afe-pcm.yaml | 100 + .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 42 + sound/soc/codecs/mt6359.c | 110 + sound/soc/codecs/mt6359.h | 7 + sound/soc/mediatek/Kconfig | 23 + sound/soc/mediatek/Makefile | 1 + sound/soc/mediatek/common/mtk-afe-fe-dai.c | 13 +- sound/soc/mediatek/common/mtk-base-afe.h | 1 + sound/soc/mediatek/mt8192/Makefile | 16 + sound/soc/mediatek/mt8192/mt8192-afe-clk.c | 669 ++++ sound/soc/mediatek/mt8192/mt8192-afe-clk.h | 244 ++ sound/soc/mediatek/mt8192/mt8192-afe-common.h | 170 + .../soc/mediatek/mt8192/mt8192-afe-control.c | 163 + sound/soc/mediatek/mt8192/mt8192-afe-gpio.c | 306 ++ sound/soc/mediatek/mt8192/mt8192-afe-gpio.h | 19 + sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 2389 +++++++++++++ sound/soc/mediatek/mt8192/mt8192-dai-adda.c | 1471 ++++++++ sound/soc/mediatek/mt8192/mt8192-dai-i2s.c | 2110 +++++++++++ sound/soc/mediatek/mt8192/mt8192-dai-pcm.c | 409 +++ sound/soc/mediatek/mt8192/mt8192-dai-tdm.c | 778 ++++ .../mediatek/mt8192/mt8192-interconnection.h | 65 + .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 1058 ++++++ sound/soc/mediatek/mt8192/mt8192-reg.h | 3131 +++++++++++++++++ 23 files changed, 13291 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml create mode 100644 Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml create mode 100644 sound/soc/mediatek/mt8192/Makefile create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-clk.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-clk.h create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-common.h create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-control.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-gpio.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-gpio.h create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-pcm.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-dai-adda.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-dai-i2s.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-dai-pcm.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-dai-tdm.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-interconnection.h create mode 100644 sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-reg.h -- 2.18.0

4 12

[PATCH v3 0/9] slab: provide and use krealloc_array()
by Bartosz Golaszewski 10 Nov '20

10 Nov '20

From: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> Andy brought to my attention the fact that users allocating an array of equally sized elements should check if the size multiplication doesn't overflow. This is why we have helpers like kmalloc_array(). However we don't have krealloc_array() equivalent and there are many users who do their own multiplication when calling krealloc() for arrays. This series provides krealloc_array() and uses it in a couple places. A separate series will follow adding devm_krealloc_array() which is needed in the xilinx adc driver. v1 -> v2: - added a kernel doc for krealloc_array() - mentioned krealloc et al in the docs - collected review tags v2 -> v3: - add a patch improving krealloc()'s kerneldoc - fix a typo - improve .rst doc - tweak line breaks Bartosz Golaszewski (9): mm: slab: clarify krealloc()'s behavior with __GFP_ZERO mm: slab: provide krealloc_array() ALSA: pcm: use krealloc_array() vhost: vringh: use krealloc_array() pinctrl: use krealloc_array() edac: ghes: use krealloc_array() drm: atomic: use krealloc_array() hwtracing: intel: use krealloc_array() dma-buf: use krealloc_array() Documentation/core-api/memory-allocation.rst | 4 ++++ drivers/dma-buf/sync_file.c | 3 +-- drivers/edac/ghes_edac.c | 4 ++-- drivers/gpu/drm/drm_atomic.c | 3 ++- drivers/hwtracing/intel_th/msu.c | 2 +- drivers/pinctrl/pinctrl-utils.c | 2 +- drivers/vhost/vringh.c | 3 ++- include/linux/slab.h | 18 ++++++++++++++++++ mm/slab_common.c | 6 +++--- sound/core/pcm_lib.c | 4 ++-- 10 files changed, 36 insertions(+), 13 deletions(-) -- 2.29.1

2 10