- Alsa-devel - mailman.alsa-project.org

[PATCH 5.4 93/98] ASoC: Intel: Skylake: Enable codec wakeup during chip init
by Greg Kroah-Hartman 01 Dec '20

01 Dec '20

From: Cezary Rojewski <cezary.rojewski(a)intel.com> commit e603f11d5df8997d104ab405ff27640b90baffaa upstream. Follow the recommendation set by hda_intel.c and enable HDMI/DP codec wakeup during bus initialization procedure. Disable wakeup once init completes. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20200305145314.32579-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: <stable(a)vger.kernel.org> # 5.4.x Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/intel/skylake/skl.c | 2 ++ 1 file changed, 2 insertions(+) --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -129,6 +129,7 @@ static int skl_init_chip(struct hdac_bus struct hdac_ext_link *hlink; int ret; + snd_hdac_set_codec_wakeup(bus, true); skl_enable_miscbdcge(bus->dev, false); ret = snd_hdac_bus_init_chip(bus, full_reset); @@ -137,6 +138,7 @@ static int skl_init_chip(struct hdac_bus writel(0, hlink->ml_addr + AZX_REG_ML_LOSIDV); skl_enable_miscbdcge(bus->dev, true); + snd_hdac_set_codec_wakeup(bus, false); return ret; }

1 0

[PATCH 5.4 92/98] ASoC: Intel: Skylake: Select hda configuration permissively
by Greg Kroah-Hartman 01 Dec '20

01 Dec '20

From: Cezary Rojewski <cezary.rojewski(a)intel.com> commit a66f88394a78fec9a05fa6e517e9603e8eca8363 upstream. With _reset_link removed from the probe sequence, codec_mask at the time skl_find_hda_machine() is invoked will always be 0, so hda machine will never be chosen. Rather than reorganizing boot flow, be permissive about invalid mask. codec_mask will be set to proper value during probe_work - before skl_codec_create() ever gets called. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20200305145314.32579-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: <stable(a)vger.kernel.org> # 5.4.x Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/intel/skylake/skl.c | 5 ----- 1 file changed, 5 deletions(-) --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -480,13 +480,8 @@ static struct skl_ssp_clk skl_ssp_clks[] static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl_dev *skl, struct snd_soc_acpi_mach *machines) { - struct hdac_bus *bus = skl_to_bus(skl); struct snd_soc_acpi_mach *mach; - /* check if we have any codecs detected on bus */ - if (bus->codec_mask == 0) - return NULL; - /* point to common table */ mach = snd_soc_acpi_intel_hda_machines;

1 0

[PATCH 5.4 91/98] ASoC: Intel: Skylake: Remove superfluous chip initialization
by Greg Kroah-Hartman 01 Dec '20

01 Dec '20

From: Cezary Rojewski <cezary.rojewski(a)intel.com> commit 2ef81057d80456870b97890dd79c8f56a85b1242 upstream. Skylake driver does the controller init operation twice: - first during probe (only to stop it just before scheduling probe_work) - and during said probe_work where the actual correct sequence is executed To properly complete boot sequence when iDisp codec is present, bus initialization has to be called only after _i915_init() finishes. With additional _reset_list preceding _i915_init(), iDisp codec never gets the chance to enumerate on the link. Remove the superfluous initialization to address the issue. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20200305145314.32579-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: <stable(a)vger.kernel.org> # 5.4.x Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/intel/skylake/skl.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -807,6 +807,9 @@ static void skl_probe_work(struct work_s return; } + skl_init_pci(skl); + skl_dum_set(bus); + err = skl_init_chip(bus, true); if (err < 0) { dev_err(bus->dev, "Init chip failed with err: %d\n", err); @@ -922,8 +925,6 @@ static int skl_first_init(struct hdac_bu return -ENXIO; } - snd_hdac_bus_reset_link(bus, true); - snd_hdac_bus_parse_capabilities(bus); /* check if PPCAP exists */ @@ -971,11 +972,7 @@ static int skl_first_init(struct hdac_bu if (err < 0) return err; - /* initialize chip */ - skl_init_pci(skl); - skl_dum_set(bus); - - return skl_init_chip(bus, true); + return 0; } static int skl_probe(struct pci_dev *pci, @@ -1080,8 +1077,6 @@ static int skl_probe(struct pci_dev *pci if (bus->mlcap) snd_hdac_ext_bus_get_ml_capabilities(bus); - snd_hdac_bus_stop_chip(bus); - /* create device for soc dmic */ err = skl_dmic_device_register(skl); if (err < 0) {

1 0

[PATCH 0/8] ASoC: Intel: Skylake: Fix HDAudio and DMIC for v5.4
by Cezary Rojewski 01 Dec '20

01 Dec '20

First six of the backport address numerous problems troubling HDAudio configuration users for Skylake driver. Upstream series: "ASoC: Intel: Skylake: Fix HDaudio and Dmic" [1] provides the explanation and reasoning behind it. These have been initialy pushed into v5.7-rc1 via: "sound updates for 5.7-rc1" [2] by Takashi. Last two patches are from: "Add support for different DMIC configurations" [3] which focuses on HDAudio with DMIC configuration. Patch: "ASoC: Intel: Skylake: Add alternative topology binary name" of the mentioned series has already been merged to v5.4.y -stable and thus it's not included here. Fixes target mainly Skylake and Kabylake based platforms, released in 2015-2016 period. [1]: https://lore.kernel.org/alsa-devel/20200305145314.32579-1-cezary.rojewski@i… [2]: https://lore.kernel.org/lkml/s5htv22uso8.wl-tiwai@suse.de/ [3]: https://lore.kernel.org/alsa-devel/20200427132727.24942-1-mateusz.gorski@li… Cezary Rojewski (6): ASoC: Intel: Skylake: Remove superfluous chip initialization ASoC: Intel: Skylake: Select hda configuration permissively ASoC: Intel: Skylake: Enable codec wakeup during chip init ASoC: Intel: Skylake: Shield against no-NHLT configurations ASoC: Intel: Allow for ROM init retry on CNL platforms ASoC: Intel: Skylake: Await purge request ack on CNL Mateusz Gorski (2): ASoC: Intel: Multiple I/O PCM format support for pipe ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHLT include/uapi/sound/skl-tplg-interface.h | 2 + sound/soc/intel/skylake/bxt-sst.c | 3 - sound/soc/intel/skylake/cnl-sst.c | 35 ++++-- sound/soc/intel/skylake/skl-nhlt.c | 3 +- sound/soc/intel/skylake/skl-sst-dsp.h | 2 + sound/soc/intel/skylake/skl-topology.c | 159 +++++++++++++++++++++++- sound/soc/intel/skylake/skl-topology.h | 1 + sound/soc/intel/skylake/skl.c | 29 ++--- 8 files changed, 204 insertions(+), 30 deletions(-) -- 2.17.1

3 17

Re: [PATCH 000/141] Fix fall-through warnings for Clang
by Gustavo A. R. Silva 01 Dec '20

01 Dec '20

On Tue, Dec 01, 2020 at 12:52:27AM -0500, Martin K. Petersen wrote: > > Gustavo, > > > This series aims to fix almost all remaining fall-through warnings in > > order to enable -Wimplicit-fallthrough for Clang. > > Applied 20-22,54,120-124 to 5.11/scsi-staging, thanks. Awesome! :) Thanks, Martin. -- Gustavo

1 0

[PATCH] ASoC: adau1372: Add missing KConfig dependencies
by Lars-Peter Clausen 01 Dec '20

01 Dec '20

The I2C and SPI version of the adau1372 driver respectively depend on the I2C and SPI framework being enabled. Otherwise compile or linker errors will occur when building the driver. Add the proper Kconfig dependencies to ensure that the drivers are only selectable if the required framework is enabled. Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/soc/codecs/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index ec30d700901b..c3cb7ca3f883 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -372,11 +372,13 @@ config SND_SOC_ADAU1372 config SND_SOC_ADAU1372_I2C tristate "Analog Devices ADAU1372 CODEC (I2C)" + depends on I2C select SND_SOC_ADAU1372 select REGMAP_I2C config SND_SOC_ADAU1372_SPI tristate "Analog Devices ADAU1372 CODEC (SPI)" + depends on SPI_MASTER select SND_SOC_ADAU1372 select REGMAP_SPI -- 2.20.1

1 1

[PATCH 0/4] ASoC: graph card schema rework
by Rob Herring 01 Dec '20

01 Dec '20

This series updates Sameer's patch to repartition the graph card binding schema and incorporate the OF graph schema. The schema was also mixing card node and DAI node properties, so I've split the DAI part (the 'port' node) into a separate schema. There's another problem that 'frame-master' and 'bitclock-master' have inconsistent types of boolean and phandle. Having the properties just point to the local or remote endpoint within an endpoint node is kind of pointless. We should have gone with just boolean, but looks like we already have several users. MMP OLPC is the one platform using boolean, but it happens to work because the properties are effectively ignored and CPU DAI as the master is the default. Rob Rob Herring (3): ASoC: dt-bindings: Use OF graph schema ASoC: dt-bindings: marvell,mmp-sspa: Use audio-graph-port schema ASoC: dt-bindings: Refine 'frame-master' and 'bitclock-master' type Sameer Pujar (1): ASoC: audio-graph-card: Refactor schema .../bindings/sound/audio-graph-card.yaml | 106 +----------------- .../bindings/sound/audio-graph-port.yaml | 72 ++++++++++++ .../bindings/sound/audio-graph.yaml | 45 ++++++++ .../bindings/sound/marvell,mmp-sspa.yaml | 25 +---- .../bindings/sound/renesas,rsnd.yaml | 12 +- .../bindings/sound/simple-card.yaml | 6 +- 6 files changed, 132 insertions(+), 134 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-port.yaml create mode 100644 Documentation/devicetree/bindings/sound/audio-graph.yaml base-commit: e2e99930ec006c6fe1d62af339a765ade71a0d9a -- 2.25.1

4 10

[PATCH 0/2] ASoC: soc-pcm: trigger cleanup
by Kuninori Morimoto 01 Dec '20

01 Dec '20

Hi Mark These are focusing to trigger function, which can be cleanup, tidyup. Kuninori Morimoto (2): ASoC: soc-pcm: remove dpcm_do_trigger() ASoC: soc-pcm: care trigger rollback include/sound/soc-component.h | 3 +- include/sound/soc-dai.h | 4 +- include/sound/soc-link.h | 3 +- include/sound/soc.h | 1 + sound/soc/soc-component.c | 45 ++++++++++++++++++---- sound/soc/soc-dai.c | 44 +++++++++++++++++---- sound/soc/soc-link.c | 30 ++++++++++++++- sound/soc/soc-pcm.c | 72 ++++++++++++++++++++--------------- 8 files changed, 152 insertions(+), 50 deletions(-) -- 2.25.1

1 2

[PATCH 0/5] regmap/SoundWire/ASoC: Add SoundWire SDCA support
by Bard Liao 30 Nov '20

30 Nov '20

The MIPI SoundWire Device Class standard will define audio functionality beyond the scope of the existing SoundWire 1.2 standard, which is limited to the bus and interface. The description is inspired by the USB Audio Class, with "functions", "entities", "control selectors", "audio clusters". The main difference with the USB Audio class is that the devices are typically on a motherboard and descriptors stored in platform firmware instead of being retrieved from the device. The current set of devices managed in this patchset are conformant with the SDCA 0.6 specification and require dedicated drivers since the descriptors and platform firmware specification is not complete at this time. They do however rely on the hierarchical addressing required by the SDCA standard. Future devices conformant with SDCA 1.0 should rely on a class driver. This series adds support for the hierarchical SDCA addressing and extends regmap. It then provides 3 codecs for RT711-sdca headset codec, RT1316 amplifier and RT715-scda microphone codec. Note that the release of this code before the formal adoption of the SDCA 1.0 specification was formally endorsed by the MIPI Board to make sure there is no delay for Linux-based support of this specification. Jack Yu (1): ASoC/SoundWire: rt715-sdca: First version of rt715 sdw sdca codec driver Pierre-Louis Bossart (2): soundwire: SDCA: add helper macro to access controls regmap/SoundWire: sdw: add support for SoundWire 1.2 MBQ Shuming Fan (2): ASoC/SoundWire: rt1316: Add RT1316 SDCA vendor-specific driver ASoC/SoundWire: rt711-sdca: Add RT711 SDCA vendor-specific driver drivers/base/regmap/Kconfig | 6 +- drivers/base/regmap/Makefile | 1 + drivers/base/regmap/regmap-sdw-mbq.c | 101 ++ include/linux/regmap.h | 35 + include/linux/soundwire/sdw_registers.h | 32 + sound/soc/codecs/Kconfig | 20 + sound/soc/codecs/Makefile | 6 + sound/soc/codecs/rt1316-sdw.c | 756 ++++++++++++ sound/soc/codecs/rt1316-sdw.h | 115 ++ sound/soc/codecs/rt711-sdca-sdw.c | 424 +++++++ sound/soc/codecs/rt711-sdca-sdw.h | 101 ++ sound/soc/codecs/rt711-sdca.c | 1481 +++++++++++++++++++++++ sound/soc/codecs/rt711-sdca.h | 246 ++++ sound/soc/codecs/rt715-sdca-sdw.c | 278 +++++ sound/soc/codecs/rt715-sdca-sdw.h | 170 +++ sound/soc/codecs/rt715-sdca.c | 936 ++++++++++++++ sound/soc/codecs/rt715-sdca.h | 124 ++ 17 files changed, 4831 insertions(+), 1 deletion(-) create mode 100644 drivers/base/regmap/regmap-sdw-mbq.c create mode 100644 sound/soc/codecs/rt1316-sdw.c create mode 100644 sound/soc/codecs/rt1316-sdw.h create mode 100644 sound/soc/codecs/rt711-sdca-sdw.c create mode 100644 sound/soc/codecs/rt711-sdca-sdw.h create mode 100644 sound/soc/codecs/rt711-sdca.c create mode 100644 sound/soc/codecs/rt711-sdca.h create mode 100644 sound/soc/codecs/rt715-sdca-sdw.c create mode 100644 sound/soc/codecs/rt715-sdca-sdw.h create mode 100644 sound/soc/codecs/rt715-sdca.c create mode 100644 sound/soc/codecs/rt715-sdca.h -- 2.17.1

4 12

[PATCH] soundwire: Fix error return code in sdw_compute_port_params
by Qinglang Miao 30 Nov '20

30 Nov '20

Fix to return the error code -EINVAL in sdw_compute_port_params instead of 0. Fixes: 9026118f20e2 ("soundwire: Add generic bandwidth allocation algorithm") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang(a)huawei.com> --- drivers/soundwire/generic_bandwidth_allocation.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/generic_bandwidth_allocation.c b/drivers/soundwire/generic_bandwidth_allocation.c index 0bdef38c9..ad857ac62 100644 --- a/drivers/soundwire/generic_bandwidth_allocation.c +++ b/drivers/soundwire/generic_bandwidth_allocation.c @@ -283,8 +283,10 @@ static int sdw_compute_port_params(struct sdw_bus *bus) if (ret < 0) return ret; - if (group.count == 0) + if (group.count == 0) { + ret = -EINVAL; goto out; + } params = kcalloc(group.count, sizeof(*params), GFP_KERNEL); if (!params) { -- 2.23.0

2 1