- Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: hda/hdmi: always print pin NIDs as hexadecimal
by Kai Vehmanen 11 Dec '20

11 Dec '20

The debug prints from patch_hdmi.c are not aligned with HDA common code in hda_codec.c nor with other HDA codec drivers. To align with rest of the codebase, use hexadecimal formatting whenever printing value of a HDA NID. Also refer to NIDs with capital letters in traces as is done other modules. This presentation is also aligned with the formatting used in HDA codec procfs entry. Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/pci/hda/patch_hdmi.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 2ddc27db8c01..22f5a29d25f6 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -253,7 +253,7 @@ static int pin_id_to_pin_index(struct hda_codec *codec, return pin_idx; } - codec_warn(codec, "HDMI: pin nid %d not registered\n", pin_nid); + codec_warn(codec, "HDMI: pin NID 0x%x not registered\n", pin_nid); return -EINVAL; } @@ -313,7 +313,7 @@ static int cvt_nid_to_cvt_index(struct hda_codec *codec, hda_nid_t cvt_nid) if (get_cvt(spec, cvt_idx)->cvt_nid == cvt_nid) return cvt_idx; - codec_warn(codec, "HDMI: cvt nid %d not registered\n", cvt_nid); + codec_warn(codec, "HDMI: cvt NID 0x%x not registered\n", cvt_nid); return -EINVAL; } @@ -687,8 +687,7 @@ static void hdmi_pin_setup_infoframe(struct hda_codec *codec, dp_ai->CC02_CT47 = active_channels - 1; dp_ai->CA = ca; } else { - codec_dbg(codec, "HDMI: unknown connection type at pin %d\n", - pin_nid); + codec_dbg(codec, "HDMI: unknown connection type at pin NID 0x%x\n", pin_nid); return; } @@ -701,10 +700,8 @@ static void hdmi_pin_setup_infoframe(struct hda_codec *codec, */ if (!hdmi_infoframe_uptodate(codec, pin_nid, ai.bytes, sizeof(ai))) { - codec_dbg(codec, - "hdmi_pin_setup_infoframe: pin=%d channels=%d ca=0x%02x\n", - pin_nid, - active_channels, ca); + codec_dbg(codec, "%s: pin NID=0x%x channels=%d ca=0x%02x\n", + __func__, pin_nid, active_channels, ca); hdmi_stop_infoframe_trans(codec, pin_nid); hdmi_fill_audio_infoframe(codec, pin_nid, ai.bytes, sizeof(ai)); @@ -796,7 +793,7 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res, jack->jack_dirty = 1; codec_dbg(codec, - "HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d Presence_Detect=%d ELD_Valid=%d\n", + "HDMI hot plug event: Codec=%d NID=0x%x Device=%d Inactive=%d Presence_Detect=%d ELD_Valid=%d\n", codec->addr, jack->nid, jack->dev_id, !!(res & AC_UNSOL_RES_IA), !!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV)); @@ -874,7 +871,7 @@ static void haswell_verify_D0(struct hda_codec *codec, msleep(40); pwr = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_POWER_STATE, 0); pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT; - codec_dbg(codec, "Haswell HDMI audio: Power for pin 0x%x is now D%d\n", nid, pwr); + codec_dbg(codec, "Haswell HDMI audio: Power for NID 0x%x is now D%d\n", nid, pwr); } } @@ -1121,8 +1118,8 @@ static void intel_not_share_assigned_cvt(struct hda_codec *codec, per_cvt = get_cvt(spec, cvt_idx); if (!per_cvt->assigned) { codec_dbg(codec, - "choose cvt %d for pin nid %d\n", - cvt_idx, nid); + "choose cvt %d for pin NID 0x%x\n", + cvt_idx, nid); snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, cvt_idx); @@ -1320,7 +1317,7 @@ static int hdmi_read_pin_conn(struct hda_codec *codec, int pin_idx) if (!(get_wcaps(codec, pin_nid) & AC_WCAP_CONN_LIST)) { codec_warn(codec, - "HDMI: pin %d wcaps %#x does not support connection list\n", + "HDMI: pin NID 0x%x wcaps %#x does not support connection list\n", pin_nid, get_wcaps(codec, pin_nid)); return -EINVAL; } @@ -1635,7 +1632,7 @@ static void hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin, eld->eld_valid = false; codec_dbg(codec, - "HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", + "HDMI status: Codec=%d NID=0x%x Presence_Detect=%d ELD_Valid=%d\n", codec->addr, pin_nid, eld->monitor_present, eld->eld_valid); if (eld->eld_valid) { @@ -2795,7 +2792,7 @@ static int intel_pin2port(void *audio_ptr, int pin_nid) return i; } - codec_info(codec, "Can't find the HDMI/DP port for pin %d\n", pin_nid); + codec_info(codec, "Can't find the HDMI/DP port for pin NID 0x%x\n", pin_nid); return -1; } -- 2.29.2

2 1

[PATCH] ALSA: usb-audio: Fix control 'access overflow' errors from chmap
by Takashi Iwai 11 Dec '20

11 Dec '20

The current channel-map control implementation in USB-audio driver may lead to an error message like "control 3:0:0:Playback Channel Map:0: access overflow" when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get callback clears the whole array no matter which count is set, and rather the false-positive detection. This patch fixes the problem by clearing only the needed array range at usb_chmap_ctl_get(). Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/stream.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/usb/stream.c b/sound/usb/stream.c index ca76ba5b5c0b..2f6d39c2ba7c 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -193,16 +193,16 @@ static int usb_chmap_ctl_get(struct snd_kcontrol *kcontrol, struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol); struct snd_usb_substream *subs = info->private_data; struct snd_pcm_chmap_elem *chmap = NULL; - int i; + int i = 0; - memset(ucontrol->value.integer.value, 0, - sizeof(ucontrol->value.integer.value)); if (subs->cur_audiofmt) chmap = subs->cur_audiofmt->chmap; if (chmap) { for (i = 0; i < chmap->channels; i++) ucontrol->value.integer.value[i] = chmap->map[i]; } + for (; i < subs->channels_max; i++) + ucontrol->value.integer.value[i] = 0; return 0; } -- 2.26.2

1 0

How to annotate USB jacks without jack detection?
by Kai-Heng Feng 11 Dec '20

11 Dec '20

Hi, There are some UAC1 devices come with jacks, but without jack detection ability. And many USB/Thunderbolt docks are equipped with such USB device. Userspace like PulseAudio automatically switch to USB audio when they gets plugged. However, auto-switching to UAC1 device can be problematic because it may not connected to any headset or speaker. So I wonder what's the best way to let userspace know the USB device is a jack without jack detection ability? Through sysfs or dedicated UCM conf? Kai-Heng

2 2

[PATCH] ASoC: fsl: imx-hdmi: Fix an uninitialized return in probe
by Dan Carpenter 11 Dec '20

11 Dec '20

The "ret" variable should be set to a negative error code but currently it returns uninitialized stack data. Fixes: 6a5f850aa83a ("ASoC: fsl: Add imx-hdmi machine driver") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- sound/soc/fsl/imx-hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/fsl/imx-hdmi.c b/sound/soc/fsl/imx-hdmi.c index 2c2a76a71940..ede4a9ad1054 100644 --- a/sound/soc/fsl/imx-hdmi.c +++ b/sound/soc/fsl/imx-hdmi.c @@ -164,6 +164,7 @@ static int imx_hdmi_probe(struct platform_device *pdev) if ((hdmi_out && hdmi_in) || (!hdmi_out && !hdmi_in)) { dev_err(&pdev->dev, "Invalid HDMI DAI link\n"); + ret = -EINVAL; goto fail; } -- 2.29.2

1 0

Add supported for more Lenovo ALC285 Headset Button -- again
by Kailang 11 Dec '20

11 Dec '20

Hi Takashi, This platform had more SSID. So, use pin quirk for this platform. Many Thanks. Kailang

2 1

Lose HDMI audio and internal DMIC after upgrade from 1.2.3 to 1.2.4 on Intel TigerLake machines
by GitHub issues - opened 11 Dec '20

11 Dec '20

alsa-project/alsa-ucm-conf issue #66 was opened from starnight: We have some laptops equipped with Intel i7-1165G7 and i5-1135G7. The HDMI audio and internal Intel SST DMIC can be detected by PulseAudio with alsa-ucm-conf at **v1.2.3**. But, they are lost when upgrade alsa-ucm-conf to **v1.2.4** (including latest). I did bisect and found it starts to be failed at commit dcef48f ("HDA-Intel: add support for AMD acp microphone devices"). [alsa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/5677934/… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/66 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Add supported for more Lenovo ALC285 Headset Button
by Kailang 11 Dec '20

11 Dec '20

Hi Takashi, This platform had more SSID. So, use pin quirk for this platform. Many Thanks. Kailang

1 0

HP Envy 32" snd_hda_codec_realtek
by Mr. Indro Fedrigo 11 Dec '20

11 Dec '20

Hi All, I’ve been trying for a while to get the Audio working on my HP Envy 32 All-in-one desktop. It has a Bang&Olufsen audio system that works perfectly with windows, but it absolutely mute with Ubuntu 20.04- Centos Stream - Fedora 33 - OpenSUSE Tumbleweed... I can get sound output, using Bluetooth, on other devices but nothing from my speakers. I’m attaching the output of alsa-info.sh to begin with, if anybody has any idea. I can provide any other kind of system info if that could help. Thanks. Indro Fedrigo UC Berkeley http://alsa-project.org/db/?f=943238345fb524c3e60f2348b8b39b824d8cdc05

1 0

[PATCH v3 1/2] ALSA: hda/ca0132 - Fix AE-5 rear headphone pincfg.
by Connor McAdams 10 Dec '20

10 Dec '20

The Windows driver sets the pincfg for the AE-5's rear-headphone to report as a microphone. This causes issues with Pulseaudio mistakenly believing there is no headphone plugged in. In Linux, we should instead set it to be a headphone. Fixes: a6b0961b39896 ("ALSA: hda/ca0132 - fix AE-5 pincfg") Cc: <stable(a)kernel.org> Signed-off-by: Connor McAdams <conmanx360(a)gmail.com> Link: https://lore.kernel.org/r/20201208195223.424753-1-conmanx360@gmail.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 4fbec4258f58..e96db73c32f5 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -1223,7 +1223,7 @@ static const struct hda_pintbl ae5_pincfgs[] = { { 0x0e, 0x01c510f0 }, /* SPDIF In */ { 0x0f, 0x01017114 }, /* Port A -- Rear L/R. */ { 0x10, 0x01017012 }, /* Port D -- Center/LFE or FP Hp */ - { 0x11, 0x01a170ff }, /* Port B -- LineMicIn2 / Rear Headphone */ + { 0x11, 0x012170ff }, /* Port B -- LineMicIn2 / Rear Headphone */ { 0x12, 0x01a170f0 }, /* Port C -- LineIn1 */ { 0x13, 0x908700f0 }, /* What U Hear In*/ { 0x18, 0x50d000f0 }, /* N/A */ -- 2.25.1

2 2

[PATCH v2 0/2] ASoC: rt1015p: delay 300ms for waiting calibration
by Tzung-Bi Shih 10 Dec '20

10 Dec '20

The 1st patch moves SDB control from DAI ops trigger to DAPM event (per review comments in v1). The 2nd patch adds the 300ms delay for waiting calibration. Changes from v1: (https://patchwork.kernel.org/project/alsa-devel/patch/20201209033742.382597…) - Move the delay from trigger to DAPM event. Tzung-Bi Shih (2): ASoC: rt1015p: move SDB control from trigger to DAPM ASoC: rt1015p: delay 300ms after SDB pulling high for calibration sound/soc/codecs/rt1015p.c | 54 +++++++++++++------------------------- 1 file changed, 18 insertions(+), 36 deletions(-) -- 2.29.2.576.ga3fc446d84-goog

2 8