- Alsa-devel - mailman.alsa-project.org

[PATCH] soundwire: qcom: fix handling of qcom,ports-block-pack-mode
by Srinivas Kandagatla 11 May '21

11 May '21

Support to "qcom,ports-block-pack-mode" was added at later stages to support a variant of Qualcomm SoundWire controllers available on Apps processor. However the older versions of the SoundWire controller which are embedded in WCD Codecs do not need this property. So returning on error for those cases will break boards like DragonBoard DB845c and Lenovo Yoga C630. This patch fixes error handling on this property considering older usecases. Fixes: 5943e4fb14e3 ("soundwire: qcom: check of_property_read status") Reported-by: Amit Pundir <amit.pundir(a)linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- drivers/soundwire/qcom.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 2827085a323b..0ef79d60e88e 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -1150,8 +1150,16 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", bp_mode, nports); - if (ret) - return ret; + if (ret) { + u32 version; + + ctrl->reg_read(ctrl, SWRM_COMP_HW_VERSION, &version); + + if (version <= 0x01030000) + memset(bp_mode, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS); + else + return ret; + } memset(hstart, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS); of_property_read_u8_array(np, "qcom,ports-hstart", hstart, nports); -- 2.21.0

3 2

[PATCH v8 2/2] ASoC: rt715:add micmute led state control supports
by Perry Yuan 11 May '21

11 May '21

From: Perry Yuan <perry_yuan(a)dell.com> Some new Dell system is going to support audio internal micphone privacy setting from hardware level with micmute led state changing When micmute hotkey pressed by user, soft mute will need to be enabled firstly in case of pop noise, and codec driver need to react to mic mute event to EC(embedded controller) notifying that SW mute is completed Then EC will do the hardware mute physically within the timeout reached This patch allow codec rt715 and rt715 sdca driver to change the local micmute led state. Dell privacy led trigger driver will ack EC when micmute key pressed through this micphone led control interface like hda_generic provided ACPI method defined in dell-privacy micmute led trigger will be called for notifying the EC that software mute has been completed, then hardware audio circuit solution controlled by EC will switch the audio input source off/on Signed-off-by: Perry Yuan <perry_yuan(a)dell.com> -------- v7 -> v8: * N/A v6 -> v7: * addresed review comments from Jaroslav * use device id in the quirk list v5 -> v6: * add quirks for micmute led control as short term solution to control micmute led state change * add comments for the invert checking v4 -> v5: * rebase to latest 5.12 rc4 upstream kernel v3 -> v4: * remove unused debug log * remove compile flag of DELL privacy * move the micmute_led to local from rt715_priv * when Jaroslav upstream his gerneric LED trigger driver,I will rebase this patch,please consider merge this at first https://lore.kernel.org/alsa-devel/20210211111400.1131020-1-perex@perex.cz/ v2 -> v3: * simplify the patch to reuse some val value * add more detail to the commit info v1 -> v2: * fix some format issue -------- --- sound/soc/codecs/rt715-sdca.c | 42 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt715.c | 42 +++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+) diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c index 936e3061ca1e..de46514e0207 100644 --- a/sound/soc/codecs/rt715-sdca.c +++ b/sound/soc/codecs/rt715-sdca.c @@ -11,12 +11,14 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/leds.h> #include <linux/pm_runtime.h> #include <linux/pm.h> #include <linux/soundwire/sdw.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/dmi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -344,6 +346,32 @@ static int rt715_sdca_get_volsw(struct snd_kcontrol *kcontrol, return 0; } +static bool micmute_led_set; +static int dmi_matched(const struct dmi_system_id *dmi) +{ + micmute_led_set = 1; + return 1; +} + +/* Some systems will need to use this to trigger mic mute LED state changed */ +static const struct dmi_system_id micmute_led_dmi_table[] = { + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), + }, + }, + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), + }, + }, + {}, +}; + static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -358,6 +386,7 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = p->invert; int err; + bool micmute_led; for (i = 0; i < 4; i++) { if (ucontrol->value.integer.value[i] != rt715->kctl_switch_orig[i]) { @@ -394,6 +423,18 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, return err; } + /* Micmute LED state changed by muted/unmute switch + * to keep syncing with actual hardware mic mute led state + * invert will be checked to change the state switch + */ + if (invert && micmute_led_set) { + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]) + micmute_led = LED_OFF; + else + micmute_led = LED_ON; + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); + } + return k_changed; } @@ -1069,6 +1110,7 @@ int rt715_sdca_io_init(struct device *dev, struct sdw_slave *slave) pm_runtime_mark_last_busy(&slave->dev); pm_runtime_put_autosuspend(&slave->dev); + dmi_check_system(micmute_led_dmi_table); return 0; } diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c index 1352869cc086..4dbd870009b8 100644 --- a/sound/soc/codecs/rt715.c +++ b/sound/soc/codecs/rt715.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/leds.h> #include <linux/pm_runtime.h> #include <linux/pm.h> #include <linux/soundwire/sdw.h> @@ -25,6 +26,7 @@ #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/of_device.h> +#include <linux/dmi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -70,6 +72,32 @@ static void rt715_get_gain(struct rt715_priv *rt715, unsigned int addr_h, pr_err("Failed to get L channel gain.\n"); } +static bool micmute_led_set; +static int dmi_matched(const struct dmi_system_id *dmi) +{ + micmute_led_set = 1; + return 1; +} + +/* Some systems will need to use this to trigger mic mute LED state changed */ +static const struct dmi_system_id micmute_led_dmi_table[] = { + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), + }, + }, + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), + }, + }, + {}, +}; + /* For Verb-Set Amplifier Gain (Verb ID = 3h) */ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -83,6 +111,7 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, unsigned int addr_h, addr_l, val_h, val_ll, val_lr; unsigned int read_ll, read_rl, i; unsigned int k_vol_changed = 0; + bool micmute_led; for (i = 0; i < 2; i++) { if (ucontrol->value.integer.value[i] != rt715->kctl_2ch_vol_ori[i]) { @@ -155,6 +184,18 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, break; } + /* Micmute LED state changed by muted/unmute switch + * to keep syncing with actual hardware mic mute led state + * invert will be checked to change the state switch + */ + if (micmute_led_set) { + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]) + micmute_led = LED_OFF; + else + micmute_led = LED_ON; + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); + } + /* D0:power on state, D3: power saving mode */ if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) regmap_write(rt715->regmap, @@ -1088,6 +1129,7 @@ int rt715_io_init(struct device *dev, struct sdw_slave *slave) pm_runtime_mark_last_busy(&slave->dev); pm_runtime_put_autosuspend(&slave->dev); + dmi_check_system(micmute_led_dmi_table); return 0; } -- 2.25.1

3 2

[PATCH 00/53] Get rid of UTF-8 chars that can be mapped as ASCII
by Mauro Carvalho Chehab 11 May '21

11 May '21

There are several UTF-8 characters at the Kernel's documentation. Several of them were due to the process of converting files from DocBook, LaTeX, HTML and Markdown. They were probably introduced by the conversion tools used on that time. Other UTF-8 characters were added along the time, but they're easily replaceable by ASCII chars. As Linux developers are all around the globe, and not everybody has UTF-8 as their default charset, better to use UTF-8 only on cases where it is really needed. The first 3 patches on this series were manually written, in order to solve a few special cases. The remaining patches on series address such cases on *.rst files and inside the Documentation/ABI, using this perl map table in order to do the charset conversion: my %char_map = ( 0x2010 => '-', # HYPHEN 0xad => '-', # SOFT HYPHEN 0x2013 => '-', # EN DASH 0x2014 => '-', # EM DASH 0x2018 => "'", # LEFT SINGLE QUOTATION MARK 0x2019 => "'", # RIGHT SINGLE QUOTATION MARK 0xb4 => "'", # ACUTE ACCENT 0x201c => '"', # LEFT DOUBLE QUOTATION MARK 0x201d => '"', # RIGHT DOUBLE QUOTATION MARK 0x2212 => '-', # MINUS SIGN 0x2217 => '*', # ASTERISK OPERATOR 0xd7 => 'x', # MULTIPLICATION SIGN 0xbb => '>', # RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK 0xa0 => ' ', # NO-BREAK SPACE 0xfeff => '', # ZERO WIDTH NO-BREAK SPACE ); After the conversion, those UTF-8 chars will be kept: - U+00a9 ('©'): COPYRIGHT SIGN - U+00ac ('¬'): NOT SIGN # only at Documentation/powerpc/transactional_memory.rst - U+00ae ('®'): REGISTERED SIGN - U+00b0 ('°'): DEGREE SIGN - U+00b1 ('±'): PLUS-MINUS SIGN - U+00b2 ('²'): SUPERSCRIPT TWO - U+00b5 ('µ'): MICRO SIGN - U+00b7 ('·'): MIDDLE DOT # See below - U+00bd ('½'): VULGAR FRACTION ONE HALF - U+00c7 ('Ç'): LATIN CAPITAL LETTER C WITH CEDILLA - U+00df ('ß'): LATIN SMALL LETTER SHARP S - U+00e1 ('á'): LATIN SMALL LETTER A WITH ACUTE - U+00e4 ('ä'): LATIN SMALL LETTER A WITH DIAERESIS - U+00e6 ('æ'): LATIN SMALL LETTER AE - U+00e7 ('ç'): LATIN SMALL LETTER C WITH CEDILLA - U+00e9 ('é'): LATIN SMALL LETTER E WITH ACUTE - U+00ea ('ê'): LATIN SMALL LETTER E WITH CIRCUMFLEX - U+00eb ('ë'): LATIN SMALL LETTER E WITH DIAERESIS - U+00f3 ('ó'): LATIN SMALL LETTER O WITH ACUTE - U+00f4 ('ô'): LATIN SMALL LETTER O WITH CIRCUMFLEX - U+00f6 ('ö'): LATIN SMALL LETTER O WITH DIAERESIS - U+00f8 ('ø'): LATIN SMALL LETTER O WITH STROKE - U+00fa ('ú'): LATIN SMALL LETTER U WITH ACUTE - U+00fc ('ü'): LATIN SMALL LETTER U WITH DIAERESIS - U+00fd ('ý'): LATIN SMALL LETTER Y WITH ACUTE - U+011f ('ğ'): LATIN SMALL LETTER G WITH BREVE - U+0142 ('ł'): LATIN SMALL LETTER L WITH STROKE - U+03bc ('μ'): GREEK SMALL LETTER MU - U+2026 ('…'): HORIZONTAL ELLIPSIS - U+2122 ('™'): TRADE MARK SIGN - U+2191 ('↑'): UPWARDS ARROW - U+2192 ('→'): RIGHTWARDS ARROW - U+2193 ('↓'): DOWNWARDS ARROW - U+2264 ('≤'): LESS-THAN OR EQUAL TO - U+2265 ('≥'): GREATER-THAN OR EQUAL TO - U+2500 ('─'): BOX DRAWINGS LIGHT HORIZONTAL - U+2502 ('│'): BOX DRAWINGS LIGHT VERTICAL - U+2514 ('└'): BOX DRAWINGS LIGHT UP AND RIGHT - U+251c ('├'): BOX DRAWINGS LIGHT VERTICAL AND RIGHT - U+2b0d ('⬍'): UP DOWN BLACK ARROW PS.: maintainers were bcc on patch 00/53, in order to reduce the risk of patch 00 to be rejected by list servers. - For U+00b7 ('·'): MIDDLE DOT, I opted to keep it on a few places: - Documentation/devicetree/bindings/clock/qcom,rpmcc.txt As this file will be some day converted to yaml, where the MIDDLE DOT will be removed, I guess it is not worth touching it. - Documentation/scheduler/sched-deadline.rst There, it is used on a math expressions. So, better to keep. - Documentation/devicetree/bindings/media/video-interface-devices.yaml There, it part of an ASCII artwork. - translations/zh_CN I prefer not touching it, as it might have some special meaning in Simplified Chinese. Mauro Carvalho Chehab (53): docs: cdrom-standard.rst: get rid of uneeded UTF-8 chars docs: ABI: remove a meaningless UTF-8 character docs: ABI: remove some spurious characters docs: index.rst: avoid using UTF-8 chars docs: hwmon: avoid using UTF-8 chars docs: admin-guide: avoid using UTF-8 chars docs: admin-guide: media: ipu3.rst: avoid using UTF-8 chars docs: admin-guide: sysctl: kernel.rst: avoid using UTF-8 chars docs: admin-guide: perf: imx-ddr.rst: avoid using UTF-8 chars docs: admin-guide: pm: avoid using UTF-8 chars docs: trace: coresight: coresight-etm4x-reference.rst: avoid using UTF-8 chars docs: driver-api: avoid using UTF-8 chars docs: driver-api: fpga: avoid using UTF-8 chars docs: driver-api: iio: avoid using UTF-8 chars docs: driver-api: thermal: avoid using UTF-8 chars docs: driver-api: media: drivers: avoid using UTF-8 chars docs: driver-api: firmware: other_interfaces.rst: avoid using UTF-8 chars docs: driver-api: nvdimm: btt.rst: avoid using UTF-8 chars docs: fault-injection: nvme-fault-injection.rst: avoid using UTF-8 chars docs: usb: avoid using UTF-8 chars docs: process: avoid using UTF-8 chars docs: block: data-integrity.rst: avoid using UTF-8 chars docs: userspace-api: media: fdl-appendix.rst: avoid using UTF-8 chars docs: userspace-api: media: v4l: avoid using UTF-8 chars docs: userspace-api: media: dvb: avoid using UTF-8 chars docs: vm: zswap.rst: avoid using UTF-8 chars docs: filesystems: f2fs.rst: avoid using UTF-8 chars docs: filesystems: ext4: avoid using UTF-8 chars docs: kernel-hacking: avoid using UTF-8 chars docs: hid: avoid using UTF-8 chars docs: security: tpm: avoid using UTF-8 chars docs: security: keys: trusted-encrypted.rst: avoid using UTF-8 chars docs: riscv: vm-layout.rst: avoid using UTF-8 chars docs: networking: scaling.rst: avoid using UTF-8 chars docs: networking: devlink: devlink-dpipe.rst: avoid using UTF-8 chars docs: networking: device_drivers: avoid using UTF-8 chars docs: x86: avoid using UTF-8 chars docs: scheduler: sched-deadline.rst: avoid using UTF-8 chars docs: dev-tools: testing-overview.rst: avoid using UTF-8 chars docs: power: powercap: powercap.rst: avoid using UTF-8 chars docs: ABI: avoid using UTF-8 chars docs: doc-guide: contributing.rst: avoid using UTF-8 chars docs: PCI: acpi-info.rst: avoid using UTF-8 chars docs: gpu: avoid using UTF-8 chars docs: sound: kernel-api: writing-an-alsa-driver.rst: avoid using UTF-8 chars docs: arm64: arm-acpi.rst: avoid using UTF-8 chars docs: infiniband: tag_matching.rst: avoid using UTF-8 chars docs: timers: no_hz.rst: avoid using UTF-8 chars docs: misc-devices: ibmvmc.rst: avoid using UTF-8 chars docs: firmware-guide: acpi: lpit.rst: avoid using UTF-8 chars docs: firmware-guide: acpi: dsd: graph.rst: avoid using UTF-8 chars docs: virt: kvm: avoid using UTF-8 chars docs: RCU: avoid using UTF-8 chars .../obsolete/sysfs-kernel-fadump_registered | 2 +- .../obsolete/sysfs-kernel-fadump_release_mem | 2 +- ...sfs-class-chromeos-driver-cros-ec-lightbar | 2 +- .../ABI/testing/sysfs-class-net-cdc_ncm | 2 +- .../ABI/testing/sysfs-devices-platform-ipmi | 2 +- .../testing/sysfs-devices-platform-trackpoint | 2 +- Documentation/ABI/testing/sysfs-devices-soc | 4 +- Documentation/ABI/testing/sysfs-module | 4 +- Documentation/PCI/acpi-info.rst | 26 +- .../Data-Structures/Data-Structures.rst | 52 ++-- .../Expedited-Grace-Periods.rst | 40 +-- .../Tree-RCU-Memory-Ordering.rst | 10 +- .../RCU/Design/Requirements/Requirements.rst | 126 ++++----- Documentation/admin-guide/index.rst | 2 +- Documentation/admin-guide/media/ipu3.rst | 2 +- Documentation/admin-guide/module-signing.rst | 4 +- Documentation/admin-guide/perf/imx-ddr.rst | 2 +- Documentation/admin-guide/pm/intel_idle.rst | 4 +- Documentation/admin-guide/pm/intel_pstate.rst | 4 +- Documentation/admin-guide/ras.rst | 94 +++---- .../admin-guide/reporting-issues.rst | 12 +- Documentation/admin-guide/sysctl/kernel.rst | 2 +- Documentation/arm64/arm-acpi.rst | 8 +- Documentation/block/data-integrity.rst | 2 +- Documentation/cdrom/cdrom-standard.rst | 30 +-- Documentation/dev-tools/testing-overview.rst | 4 +- Documentation/doc-guide/contributing.rst | 2 +- .../driver-api/firmware/other_interfaces.rst | 2 +- Documentation/driver-api/fpga/fpga-bridge.rst | 10 +- Documentation/driver-api/fpga/fpga-mgr.rst | 12 +- .../driver-api/fpga/fpga-programming.rst | 8 +- Documentation/driver-api/fpga/fpga-region.rst | 20 +- Documentation/driver-api/iio/buffers.rst | 8 +- Documentation/driver-api/iio/hw-consumer.rst | 10 +- .../driver-api/iio/triggered-buffers.rst | 6 +- Documentation/driver-api/iio/triggers.rst | 10 +- Documentation/driver-api/index.rst | 2 +- Documentation/driver-api/ioctl.rst | 8 +- .../media/drivers/sh_mobile_ceu_camera.rst | 8 +- .../driver-api/media/drivers/vidtv.rst | 4 +- .../driver-api/media/drivers/zoran.rst | 2 +- Documentation/driver-api/nvdimm/btt.rst | 2 +- .../driver-api/thermal/cpu-idle-cooling.rst | 14 +- .../driver-api/thermal/intel_powerclamp.rst | 6 +- .../thermal/x86_pkg_temperature_thermal.rst | 2 +- .../fault-injection/nvme-fault-injection.rst | 2 +- Documentation/filesystems/ext4/attributes.rst | 20 +- Documentation/filesystems/ext4/bigalloc.rst | 6 +- Documentation/filesystems/ext4/blockgroup.rst | 8 +- Documentation/filesystems/ext4/blocks.rst | 2 +- Documentation/filesystems/ext4/directory.rst | 16 +- Documentation/filesystems/ext4/eainode.rst | 2 +- Documentation/filesystems/ext4/inlinedata.rst | 6 +- Documentation/filesystems/ext4/inodes.rst | 6 +- Documentation/filesystems/ext4/journal.rst | 8 +- Documentation/filesystems/ext4/mmp.rst | 2 +- .../filesystems/ext4/special_inodes.rst | 4 +- Documentation/filesystems/ext4/super.rst | 10 +- Documentation/filesystems/f2fs.rst | 6 +- .../firmware-guide/acpi/dsd/graph.rst | 2 +- Documentation/firmware-guide/acpi/lpit.rst | 2 +- Documentation/gpu/i915.rst | 2 +- Documentation/gpu/komeda-kms.rst | 2 +- Documentation/hid/hid-sensor.rst | 70 ++--- Documentation/hid/intel-ish-hid.rst | 246 +++++++++--------- Documentation/hwmon/ir36021.rst | 2 +- Documentation/hwmon/ltc2992.rst | 2 +- Documentation/hwmon/pm6764tr.rst | 2 +- Documentation/hwmon/tmp103.rst | 4 +- Documentation/index.rst | 4 +- Documentation/infiniband/tag_matching.rst | 8 +- Documentation/kernel-hacking/hacking.rst | 2 +- Documentation/kernel-hacking/locking.rst | 2 +- Documentation/misc-devices/ibmvmc.rst | 8 +- .../device_drivers/ethernet/intel/i40e.rst | 12 +- .../device_drivers/ethernet/intel/iavf.rst | 6 +- .../device_drivers/ethernet/netronome/nfp.rst | 12 +- .../networking/devlink/devlink-dpipe.rst | 2 +- Documentation/networking/scaling.rst | 18 +- Documentation/power/powercap/powercap.rst | 210 +++++++-------- Documentation/process/code-of-conduct.rst | 2 +- .../process/kernel-enforcement-statement.rst | 2 +- Documentation/riscv/vm-layout.rst | 2 +- Documentation/scheduler/sched-deadline.rst | 4 +- .../security/keys/trusted-encrypted.rst | 4 +- Documentation/security/tpm/tpm_event_log.rst | 2 +- Documentation/security/tpm/xen-tpmfront.rst | 2 +- .../kernel-api/writing-an-alsa-driver.rst | 68 ++--- Documentation/timers/no_hz.rst | 2 +- .../coresight/coresight-etm4x-reference.rst | 16 +- Documentation/usb/ehci.rst | 2 +- Documentation/usb/gadget_printer.rst | 2 +- Documentation/usb/mass-storage.rst | 36 +-- Documentation/usb/mtouchusb.rst | 2 +- Documentation/usb/usb-serial.rst | 2 +- .../media/dvb/audio-set-bypass-mode.rst | 2 +- .../userspace-api/media/dvb/audio.rst | 2 +- .../userspace-api/media/dvb/dmx-fopen.rst | 2 +- .../userspace-api/media/dvb/dmx-fread.rst | 2 +- .../media/dvb/dmx-set-filter.rst | 2 +- .../userspace-api/media/dvb/intro.rst | 6 +- .../userspace-api/media/dvb/video.rst | 2 +- .../userspace-api/media/fdl-appendix.rst | 64 ++--- .../userspace-api/media/v4l/biblio.rst | 8 +- .../userspace-api/media/v4l/crop.rst | 16 +- .../userspace-api/media/v4l/dev-decoder.rst | 6 +- .../userspace-api/media/v4l/diff-v4l.rst | 2 +- .../userspace-api/media/v4l/open.rst | 2 +- .../media/v4l/vidioc-cropcap.rst | 4 +- Documentation/virt/kvm/api.rst | 28 +- .../virt/kvm/running-nested-guests.rst | 12 +- Documentation/vm/zswap.rst | 4 +- Documentation/x86/resctrl.rst | 2 +- Documentation/x86/sgx.rst | 4 +- 114 files changed, 807 insertions(+), 807 deletions(-) -- 2.30.2

8 19

[PATCH 00/10] Tidy up device ID reading on legacy Cirrus parts
by Charles Keepax 11 May '21

11 May '21

Pierre requested I have a look at some cppcheck warnings in the cs42l42 driver, since it is reassigning the ret variable without ever checking the result. Looking a bit more broadly this happens in quite a few legacy Cirrus parts, as they all use the same process to read the ID, factor out a small helper so they can all share the same code. Whilst in there fix up a couple of other trivial error path issues as well. Thanks, Charles Charles Keepax (10): ASoC: cirrus: Add helper function for reading the device ID ASoC: cs35l32: Minor error paths fixups ASoC: cs35l33: Minor error paths fixups ASoC: cs35l34: Minor error paths fixups ASoC: cs35l35: Minor error paths fixups ASoC: cs35l35: Correct errata handling ASoC: cs42l42: Minor error paths fixups ASoC: cs42l73: Minor error paths fixups ASoC: cs43130: Minor error paths fixups ASoC: cs53l30: Minor error paths fixups sound/soc/codecs/cirrus_legacy.h | 21 +++++++++++++++++++++ sound/soc/codecs/cs35l32.c | 34 ++++++++++++++++++---------------- sound/soc/codecs/cs35l33.c | 15 +++++++++------ sound/soc/codecs/cs35l34.c | 39 ++++++++++++++++++++++----------------- sound/soc/codecs/cs35l35.c | 21 ++++++++++----------- sound/soc/codecs/cs35l35.h | 1 + sound/soc/codecs/cs42l42.c | 18 ++++++++---------- sound/soc/codecs/cs42l73.c | 30 +++++++++++++++++------------- sound/soc/codecs/cs43130.c | 31 +++++++++++++++++++------------ sound/soc/codecs/cs53l30.c | 22 +++++++++++----------- 10 files changed, 136 insertions(+), 96 deletions(-) create mode 100644 sound/soc/codecs/cirrus_legacy.h -- 2.11.0

3 13

[PATCH] ALSA: usb-audio: Fix potential out-of-bounce access in MIDI EP parser
by Takashi Iwai 11 May '21

11 May '21

The recently introduced MIDI endpoint parser code has an access to the field without the size validation, hence it might lead to out-of-bounce access. Add the sanity checks for the descriptor sizes. Fixes: eb596e0fd13c ("ALSA: usb-audio: generate midi streaming substream names from jack names") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/midi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/usb/midi.c b/sound/usb/midi.c index 649eb8d1ab7d..2c01649c70f6 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -1750,7 +1750,7 @@ static struct usb_midi_in_jack_descriptor *find_usb_in_jack_descriptor( struct usb_midi_in_jack_descriptor *injd = (struct usb_midi_in_jack_descriptor *)extra; - if (injd->bLength > 4 && + if (injd->bLength >= sizeof(*injd) && injd->bDescriptorType == USB_DT_CS_INTERFACE && injd->bDescriptorSubtype == UAC_MIDI_IN_JACK && injd->bJackID == jack_id) @@ -1773,7 +1773,7 @@ static struct usb_midi_out_jack_descriptor *find_usb_out_jack_descriptor( struct usb_midi_out_jack_descriptor *outjd = (struct usb_midi_out_jack_descriptor *)extra; - if (outjd->bLength > 4 && + if (outjd->bLength >= sizeof(*outjd) && outjd->bDescriptorType == USB_DT_CS_INTERFACE && outjd->bDescriptorSubtype == UAC_MIDI_OUT_JACK && outjd->bJackID == jack_id) @@ -1820,7 +1820,8 @@ static void snd_usbmidi_init_substream(struct snd_usb_midi *umidi, outjd = find_usb_out_jack_descriptor(hostif, jack_id); if (outjd) { sz = USB_DT_MIDI_OUT_SIZE(outjd->bNrInputPins); - iJack = *(((uint8_t *) outjd) + sz - sizeof(uint8_t)); + if (outjd->bLength >= sz) + iJack = *(((uint8_t *) outjd) + sz - sizeof(uint8_t)); } } else { /* and out jacks connect to ins */ -- 2.26.2

1 0

[PATCH 0/4] ASoC: codecs: wcd934x: add Headset and button detection support
by Srinivas Kandagatla 11 May '21

11 May '21

This patchset adds support to MBHC(Multi Button Headset Control) block found in Qualcomm WCD codecs. MBHC support headset type detection, both Mechanical and electrical insert/removal detection along with 8 buttons detection, Over current interrupts on HPHL/R, Impedance Measurements on HPHL/R. Eventhough MBHC block supports things like OverCurrent detection, Currently its reported as a kernel debug message. Should this be reported as an uevent to userspace? like the way USB reports? Any suggestions? First patch adds a common mbhc driver and the second one wcd934x specific driver changes along with sdm845 soundcard related changes. Common wcd-mbhc-v2 driver should be reusable across multiple codecs like WCD9335, WCD934x, WCD937x and WCD938x. Most of the work is derived from downstream Qualcomm kernels. Credits to various Qualcomm authors from Patrick Lai's team who have contributed to this code. This patchset thanks, srini Srinivas Kandagatla (4): ASoC: dt-bindings: wcd934x: add bindings for Headset Button detection ASoC: codecs: wcd: add multi button Headset detection support ASoC: codecs: wcd934x: add mbhc support ASoC: qcom: sdm845: add jack support for WCD934x .../bindings/sound/qcom,wcd934x.yaml | 65 + include/linux/mfd/wcd934x/registers.h | 57 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wcd-mbhc-v2.c | 1463 +++++++++++++++++ sound/soc/codecs/wcd-mbhc-v2.h | 340 ++++ sound/soc/codecs/wcd934x.c | 885 +++++++++- sound/soc/qcom/sdm845.c | 8 + 8 files changed, 2809 insertions(+), 15 deletions(-) create mode 100644 sound/soc/codecs/wcd-mbhc-v2.c create mode 100644 sound/soc/codecs/wcd-mbhc-v2.h -- 2.21.0

3 7

[PATCH] ASoC: ak5558: Correct the dai name for ak5552
by Shengjiu Wang 11 May '21

11 May '21

Correct the dai name for ak5552. The name should be "ak5552-aif". Fixes: d8c5c82e4e5b ("ASoC: ak5558: Add support for ak5552") Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/codecs/ak5558.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/ak5558.c b/sound/soc/codecs/ak5558.c index 34aed80db0eb..37d4600b6f2c 100644 --- a/sound/soc/codecs/ak5558.c +++ b/sound/soc/codecs/ak5558.c @@ -307,7 +307,7 @@ static struct snd_soc_dai_driver ak5558_dai = { }; static struct snd_soc_dai_driver ak5552_dai = { - .name = "ak5558-aif", + .name = "ak5552-aif", .capture = { .stream_name = "Capture", .channels_min = 1, -- 2.27.0

2 1

[PATCH] ASoC: fsl_xcvr: Remove unneeded semicolon
by Wan Jiabing 11 May '21

11 May '21

Fix the following coccicheck warning: ./sound/soc/fsl/fsl_xcvr.c:739:2-3: Unneeded semicolon Signed-off-by: Wan Jiabing <wanjiabing(a)vivo.com> --- sound/soc/fsl/fsl_xcvr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index 6cb558165848..df7c189d97dd 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -736,7 +736,7 @@ static int fsl_xcvr_load_firmware(struct fsl_xcvr *xcvr) /* clean current page, including data memory */ memset_io(xcvr->ram_addr, 0, size); } - }; + } err_firmware: release_firmware(fw); -- 2.25.1

3 2

[PATCH 00/13] ASoC: Intel: machine driver updates for 5.14
by Pierre-Louis Bossart 11 May '21

11 May '21

Some of the patches in this series for TigerLake and AlderLake SoundWire/Bluetooth support were missed in a previous submission, resend them as is, and add new patches for the CS42L42 machine driver. Brent Lu (3): ASoC: Intel: maxim-common: support max98357a ASoC: Intel: add sof-cs42l42 machine driver ASoC: Intel: sof_rt5682: code refactor for max98357a Libin Yang (1): ASoC: Intel: sof_sdw: add SOF_RT715_DAI_ID_FIX for AlderLake Pierre-Louis Bossart (4): ASoC: Intel: sof_sdw: add mutual exclusion between PCH DMIC and RT715 ASoC: Intel: boards: handle hda-dsp-common as a module ASoC: Intel: boards: create sof-maxim-common module ASoC: Intel: boards: remove .nonatomic for BE dailinks Vamshi Krishna Gopal (2): ASoC: Intel: soc-acpi: add entries for i2s machines in ADL match table ASoC: Intel: boards: add support for adl boards in sof-rt5682 Yong Zhi (3): ASoC: Intel: Boards: tgl_max98373: Add BT offload support ASoC: Intel: sof_sdw: add support for Bluetooth offload ASoC: Intel: sof_rt5682: Enable Bluetooth offload on tgl and adl sound/soc/intel/boards/Kconfig | 36 +- sound/soc/intel/boards/Makefile | 30 +- sound/soc/intel/boards/bxt_da7219_max98357a.c | 1 + sound/soc/intel/boards/bxt_rt298.c | 1 + sound/soc/intel/boards/bytcht_cx2072x.c | 1 - sound/soc/intel/boards/bytcht_da7213.c | 1 - sound/soc/intel/boards/bytcht_es8316.c | 1 - sound/soc/intel/boards/bytcht_nocodec.c | 1 - sound/soc/intel/boards/bytcr_rt5640.c | 1 - sound/soc/intel/boards/bytcr_rt5651.c | 1 - sound/soc/intel/boards/bytcr_wm5102.c | 1 - sound/soc/intel/boards/cht_bsw_rt5645.c | 1 - sound/soc/intel/boards/cht_bsw_rt5672.c | 1 - sound/soc/intel/boards/cml_rt1011_rt5682.c | 1 + sound/soc/intel/boards/ehl_rt5660.c | 2 +- sound/soc/intel/boards/glk_rt5682_max98357a.c | 1 + sound/soc/intel/boards/hda_dsp_common.c | 5 + sound/soc/intel/boards/skl_hda_dsp_generic.c | 1 + sound/soc/intel/boards/sof_cs42l42.c | 509 ++++++++++++++++++ sound/soc/intel/boards/sof_da7219_max98373.c | 1 + sound/soc/intel/boards/sof_maxim_common.c | 84 ++- sound/soc/intel/boards/sof_maxim_common.h | 14 +- sound/soc/intel/boards/sof_pcm512x.c | 2 +- sound/soc/intel/boards/sof_rt5682.c | 119 +++- sound/soc/intel/boards/sof_sdw.c | 55 +- sound/soc/intel/boards/sof_sdw_common.h | 8 + sound/soc/intel/boards/sof_sdw_max98373.c | 4 +- sound/soc/intel/boards/sof_wm8804.c | 1 - .../intel/common/soc-acpi-intel-adl-match.c | 26 + .../intel/common/soc-acpi-intel-glk-match.c | 10 + 30 files changed, 861 insertions(+), 59 deletions(-) create mode 100644 sound/soc/intel/boards/sof_cs42l42.c -- 2.25.1

2 14

[PATCH] ASoC: codecs: lpass-rx-macro: add missing MODULE_DEVICE_TABLE
by Srinivas Kandagatla 11 May '21

11 May '21

Fix module loading by adding missing MODULE_DEVICE_TABLE. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- sound/soc/codecs/lpass-rx-macro.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c index b0ebfc8d180c..171ab7f519c0 100644 --- a/sound/soc/codecs/lpass-rx-macro.c +++ b/sound/soc/codecs/lpass-rx-macro.c @@ -3579,6 +3579,7 @@ static const struct of_device_id rx_macro_dt_match[] = { { .compatible = "qcom,sm8250-lpass-rx-macro" }, { } }; +MODULE_DEVICE_TABLE(of, rx_macro_dt_match); static struct platform_driver rx_macro_driver = { .driver = { -- 2.21.0

2 1