- Alsa-devel - mailman.alsa-project.org

[PATCH AUTOSEL 5.16 39/59] ASoC: rt5682s: Fix the wrong jack type detected
by Sasha Levin 30 Mar '22

30 Mar '22

From: Derek Fang <derek.fang(a)realtek.com> [ Upstream commit c07ac3ee76e5e5506bca9c03fbbb15e40ab28430 ] Some powers were changed during the jack insert detection and clk's enable/disable in CCF. If in parallel, the influence has a chance to detect the wrong jack type. We refer to the below commit of the variant codec (rt5682) to fix this issue. ASoC: rt5682: Fix deadlock on resume 1. Remove rt5682s_headset_detect in rt5682s_jd_check_handler and use jack_detect_work instead of. 2. Use dapm mutex used in CCF to protect most of jack_detect_work. Signed-off-by: Derek Fang <derek.fang(a)realtek.com> Link: https://lore.kernel.org/r/20220223101450.4577-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5682s.c | 26 +++++++++----------------- sound/soc/codecs/rt5682s.h | 1 - 2 files changed, 9 insertions(+), 18 deletions(-) diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index d79b548d23fa..f2a2f3d60925 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -822,6 +822,7 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) { struct rt5682s_priv *rt5682s = container_of(work, struct rt5682s_priv, jack_detect_work.work); + struct snd_soc_dapm_context *dapm; int val, btn_type; if (!rt5682s->component || !rt5682s->component->card || @@ -832,7 +833,9 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) return; } - mutex_lock(&rt5682s->jdet_mutex); + dapm = snd_soc_component_get_dapm(rt5682s->component); + + snd_soc_dapm_mutex_lock(dapm); mutex_lock(&rt5682s->calibrate_mutex); val = snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) @@ -889,6 +892,9 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) rt5682s->irq_work_delay_time = 50; } + mutex_unlock(&rt5682s->calibrate_mutex); + snd_soc_dapm_mutex_unlock(dapm); + snd_soc_jack_report(rt5682s->hs_jack, rt5682s->jack_type, SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3); @@ -898,9 +904,6 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) schedule_delayed_work(&rt5682s->jd_check_work, 0); else cancel_delayed_work_sync(&rt5682s->jd_check_work); - - mutex_unlock(&rt5682s->calibrate_mutex); - mutex_unlock(&rt5682s->jdet_mutex); } static void rt5682s_jd_check_handler(struct work_struct *work) @@ -908,14 +911,9 @@ static void rt5682s_jd_check_handler(struct work_struct *work) struct rt5682s_priv *rt5682s = container_of(work, struct rt5682s_priv, jd_check_work.work); - if (snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) - & RT5682S_JDH_RS_MASK) { + if (snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) & RT5682S_JDH_RS_MASK) { /* jack out */ - rt5682s->jack_type = rt5682s_headset_detect(rt5682s->component, 0); - - snd_soc_jack_report(rt5682s->hs_jack, rt5682s->jack_type, - SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3); + schedule_delayed_work(&rt5682s->jack_detect_work, 0); } else { schedule_delayed_work(&rt5682s->jd_check_work, 500); } @@ -1323,7 +1321,6 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - struct rt5682s_priv *rt5682s = snd_soc_component_get_drvdata(component); switch (event) { case SND_SOC_DAPM_POST_PMU: @@ -1339,8 +1336,6 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_11, 0x6666); snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_12, 0xa82a); - mutex_lock(&rt5682s->jdet_mutex); - snd_soc_component_update_bits(component, RT5682S_HP_CTRL_2, RT5682S_HPO_L_PATH_MASK | RT5682S_HPO_R_PATH_MASK | RT5682S_HPO_SEL_IP_EN_SW, RT5682S_HPO_L_PATH_EN | @@ -1348,8 +1343,6 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, usleep_range(5000, 10000); snd_soc_component_update_bits(component, RT5682S_HP_AMP_DET_CTL_1, RT5682S_CP_SW_SIZE_MASK, RT5682S_CP_SW_SIZE_L | RT5682S_CP_SW_SIZE_S); - - mutex_unlock(&rt5682s->jdet_mutex); break; case SND_SOC_DAPM_POST_PMD: @@ -3075,7 +3068,6 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c, mutex_init(&rt5682s->calibrate_mutex); mutex_init(&rt5682s->sar_mutex); - mutex_init(&rt5682s->jdet_mutex); rt5682s_calibrate(rt5682s); regmap_update_bits(rt5682s->regmap, RT5682S_MICBIAS_2, diff --git a/sound/soc/codecs/rt5682s.h b/sound/soc/codecs/rt5682s.h index 1bf2ef7ce578..397a2531b6f6 100644 --- a/sound/soc/codecs/rt5682s.h +++ b/sound/soc/codecs/rt5682s.h @@ -1446,7 +1446,6 @@ struct rt5682s_priv { struct delayed_work jd_check_work; struct mutex calibrate_mutex; struct mutex sar_mutex; - struct mutex jdet_mutex; #ifdef CONFIG_COMMON_CLK struct clk_hw dai_clks_hw[RT5682S_DAI_NUM_CLKS]; -- 2.34.1

1 0

[PATCH AUTOSEL 5.16 36/59] ASoC: Intel: sof_es8336: add quirk for Huawei D15 2021
by Sasha Levin 30 Mar '22

30 Mar '22

From: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> [ Upstream commit ce6a70bfce21bb4edb7c0f29ecfb0522fa34ab71 ] Huawei D15 uses SSP_CODEC(0). Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Link: https://lore.kernel.org/r/d560a1c76edb633c37acf04a9a82518b6233a719.16403511… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/sof_es8336.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c index 20d577eaab6d..e6d599f0cd26 100644 --- a/sound/soc/intel/boards/sof_es8336.c +++ b/sound/soc/intel/boards/sof_es8336.c @@ -247,6 +247,14 @@ static const struct dmi_system_id sof_es8336_quirk_table[] = { SOF_ES8336_TGL_GPIO_QUIRK | SOF_ES8336_ENABLE_DMIC) }, + { + .callback = sof_es8336_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HUAWEI"), + DMI_MATCH(DMI_BOARD_NAME, "BOHB-WAX9-PCB-B2"), + }, + .driver_data = (void *)SOF_ES8336_SSP_CODEC(0) + }, {} }; -- 2.34.1

1 0

[PATCH AUTOSEL 5.16 34/59] ASoC: soc-core: skip zero num_dai component in searching dai name
by Sasha Levin 30 Mar '22

30 Mar '22

From: Shengjiu Wang <shengjiu.wang(a)nxp.com> [ Upstream commit f7d344a2bd5ec81fbd1ce76928fd059e57ec9bea ] In the case like dmaengine which's not a dai but as a component, the num_dai is zero, dmaengine component has the same component_of_node as cpu dai, when cpu dai component is not ready, but dmaengine component is ready, try to get cpu dai name, the snd_soc_get_dai_name() return -EINVAL, not -EPROBE_DEFER, that cause below error: asoc-simple-card <card name>: parse error -22 asoc-simple-card: probe of <card name> failed with error -22 The sound card failed to probe. So this patch fixes the issue above by skipping the zero num_dai component in searching dai name. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> Link: https://lore.kernel.org/r/1644491952-7457-1-git-send-email-shengjiu.wang@nx… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index dcf6be4c4aaa..0dc89f568407 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3184,7 +3184,7 @@ int snd_soc_get_dai_name(const struct of_phandle_args *args, for_each_component(pos) { struct device_node *component_of_node = soc_component_to_node(pos); - if (component_of_node != args->np) + if (component_of_node != args->np || !pos->num_dai) continue; ret = snd_soc_component_of_xlate_dai_name(pos, args, dai_name); -- 2.34.1

1 0

[PATCH AUTOSEL 5.16 24/59] ALSA: hda: Fix driver index handling at re-binding
by Sasha Levin 30 Mar '22

30 Mar '22

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 69458e2c27800da7697c87ed908b65323ef3f3bd ] HD-audio driver handles the multiple instances and keeps the static index that is incremented at each probe. This becomes a problem when user tries to re-bind the device via sysfs multiple times; as the device index isn't cleared unlike rmmod case, it points to the next element at re-binding, and eventually later you can't probe any more when it reaches to SNDRV_CARDS_MAX (usually 32). This patch is an attempt to improve the handling at rebinding. Instead of a static device index, now we keep a bitmap and assigns to the first zero bit position. At the driver remove, in return, the bitmap slot is cleared again, so that it'll be available for the next probe. Reported-by: Alexander Sergeyev <sergeev917(a)gmail.com> Link: https://lore.kernel.org/r/20220209081912.20687-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/hda_intel.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 3b6f2aacda45..1ffd96fbf230 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2061,14 +2061,16 @@ static const struct hda_controller_ops pci_hda_ops = { .position_check = azx_position_check, }; +static DECLARE_BITMAP(probed_devs, SNDRV_CARDS); + static int azx_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) { - static int dev; struct snd_card *card; struct hda_intel *hda; struct azx *chip; bool schedule_probe; + int dev; int err; if (pci_match_id(driver_denylist, pci)) { @@ -2076,10 +2078,11 @@ static int azx_probe(struct pci_dev *pci, return -ENODEV; } + dev = find_first_zero_bit(probed_devs, SNDRV_CARDS); if (dev >= SNDRV_CARDS) return -ENODEV; if (!enable[dev]) { - dev++; + set_bit(dev, probed_devs); return -ENOENT; } @@ -2146,7 +2149,7 @@ static int azx_probe(struct pci_dev *pci, if (schedule_probe) schedule_delayed_work(&hda->probe_work, 0); - dev++; + set_bit(dev, probed_devs); if (chip->disabled) complete_all(&hda->probe_wait); return 0; @@ -2369,6 +2372,7 @@ static void azx_remove(struct pci_dev *pci) cancel_delayed_work_sync(&hda->probe_work); device_lock(&pci->dev); + clear_bit(chip->dev_index, probed_devs); pci_set_drvdata(pci, NULL); snd_card_free(card); } -- 2.34.1

1 0

[PATCH AUTOSEL 5.16 20/59] ASoC: madera: Add dependencies on MFD
by Sasha Levin 30 Mar '22

30 Mar '22

From: Charles Keepax <ckeepax(a)opensource.cirrus.com> [ Upstream commit ec29170c724ca30305fc3a19ba2ee73ecac65509 ] The Madera CODECs use regmap_irq functions but nothing ensures that regmap_irq is built into the kernel. Add dependencies on the ASoC symbols for the relevant MFD component. There is no point in building the ASoC driver if the MFD doesn't support it and the MFD part contains the necessary dependencies to ensure everything is built into the kernel. Reported-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20220203115025.16464-1-ckeepax@opensource.cirrus.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 3a610ba183ff..0d4e1fb9befc 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -707,6 +707,7 @@ config SND_SOC_CS4349 config SND_SOC_CS47L15 tristate + depends on MFD_CS47L15 config SND_SOC_CS47L24 tristate @@ -714,15 +715,19 @@ config SND_SOC_CS47L24 config SND_SOC_CS47L35 tristate + depends on MFD_CS47L35 config SND_SOC_CS47L85 tristate + depends on MFD_CS47L85 config SND_SOC_CS47L90 tristate + depends on MFD_CS47L90 config SND_SOC_CS47L92 tristate + depends on MFD_CS47L92 # Cirrus Logic Quad-Channel ADC config SND_SOC_CS53L30 -- 2.34.1

1 0

[PATCH AUTOSEL 5.16 10/59] ASoC: SOF: Intel: hda: Remove link assignment limitation
by Sasha Levin 30 Mar '22

30 Mar '22

From: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> [ Upstream commit 2ce0d008dcc59f9c01f43277b9f9743af7b01dad ] The limitation to assign a link DMA channel for a BE iff the corresponding host DMA channel is assigned to a connected FE is only applicable if the PROCEN_FMT_QUIRK is set. So, remove it for platforms that do not enable the quirk. Complements: a792bfc1c2bc ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround") Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20220128130017.28508-1-peter.ujfalusi@linux.intel… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/hda-dai.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c index 76579383d290..1b7ba7f3e99b 100644 --- a/sound/soc/sof/intel/hda-dai.c +++ b/sound/soc/sof/intel/hda-dai.c @@ -62,6 +62,8 @@ static struct hdac_ext_stream * { struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); struct sof_intel_hda_stream *hda_stream; + const struct sof_intel_dsp_desc *chip; + struct snd_sof_dev *sdev; struct hdac_ext_stream *res = NULL; struct hdac_stream *stream = NULL; @@ -80,9 +82,20 @@ static struct hdac_ext_stream * continue; hda_stream = hstream_to_sof_hda_stream(hstream); + sdev = hda_stream->sdev; + chip = get_chip_info(sdev->pdata); /* check if link is available */ if (!hstream->link_locked) { + /* + * choose the first available link for platforms that do not have the + * PROCEN_FMT_QUIRK set. + */ + if (!(chip->quirks & SOF_INTEL_PROCEN_FMT_QUIRK)) { + res = hstream; + break; + } + if (stream->opened) { /* * check if the stream tag matches the stream -- 2.34.1

1 0

[PATCH AUTOSEL 5.16 08/59] ASoC: SOF: Intel: match sdw version on link_slaves_found
by Sasha Levin 30 Mar '22

30 Mar '22

From: Bard Liao <yung-chuan.liao(a)linux.intel.com> [ Upstream commit f67c0c0d3b9048d86ea6ae52e36a2b78c48f265d ] Codecs with the same part id, manufacturer id and part id, but different sdw version should be treated as different codecs. For example, rt711 and rt711-sdca are different. So, we should match sdw version as well. Reported-by: Reddy Muralidhar <muralidhar.reddy(a)intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20220120232157.199919-2-pierre-louis.bossart@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/hda.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index 25200a0e1dc9..fc88296ab898 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -1200,7 +1200,7 @@ static bool link_slaves_found(struct snd_sof_dev *sdev, struct hdac_bus *bus = sof_to_bus(sdev); struct sdw_intel_slave_id *ids = sdw->ids; int num_slaves = sdw->num_slaves; - unsigned int part_id, link_id, unique_id, mfg_id; + unsigned int part_id, link_id, unique_id, mfg_id, version; int i, j, k; for (i = 0; i < link->num_adr; i++) { @@ -1210,12 +1210,14 @@ static bool link_slaves_found(struct snd_sof_dev *sdev, mfg_id = SDW_MFG_ID(adr); part_id = SDW_PART_ID(adr); link_id = SDW_DISCO_LINK_ID(adr); + version = SDW_VERSION(adr); for (j = 0; j < num_slaves; j++) { /* find out how many identical parts were reported on that link */ if (ids[j].link_id == link_id && ids[j].id.part_id == part_id && - ids[j].id.mfg_id == mfg_id) + ids[j].id.mfg_id == mfg_id && + ids[j].id.sdw_version == version) reported_part_count++; } @@ -1224,21 +1226,24 @@ static bool link_slaves_found(struct snd_sof_dev *sdev, if (ids[j].link_id != link_id || ids[j].id.part_id != part_id || - ids[j].id.mfg_id != mfg_id) + ids[j].id.mfg_id != mfg_id || + ids[j].id.sdw_version != version) continue; /* find out how many identical parts are expected */ for (k = 0; k < link->num_adr; k++) { u64 adr2 = link->adr_d[k].adr; - unsigned int part_id2, link_id2, mfg_id2; + unsigned int part_id2, link_id2, mfg_id2, version2; mfg_id2 = SDW_MFG_ID(adr2); part_id2 = SDW_PART_ID(adr2); link_id2 = SDW_DISCO_LINK_ID(adr2); + version2 = SDW_VERSION(adr2); if (link_id2 == link_id && part_id2 == part_id && - mfg_id2 == mfg_id) + mfg_id2 == mfg_id && + version2 == version) expected_part_count++; } -- 2.34.1

1 0

[PATCH AUTOSEL 5.16 07/59] ASoC: cs42l42: Report full jack status when plug is detected
by Sasha Levin 30 Mar '22

30 Mar '22

From: Richard Fitzgerald <rf(a)opensource.cirrus.com> [ Upstream commit 8d06f797f844d04a961f201f886f7f9985edc9bf ] When a plug event is detect report the full state of all status bits, don't assume that there will have been a previous unplug event to clear all the bits. Report the state of both HEADPHONE and MICROPHONE bits according to detected type, and clear all the button status bits. The current button status is already checked and reported at the end of the function. During a system suspend the jack could be unplugged and plugged, possibly changing the jack type. On resume the interrupt status will indicate a plug event - there will not be an unplug event to clear the bits. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20220121120412.672284-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/cs42l42.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index a63fba4e6c9c..eb170d106396 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -1630,7 +1630,11 @@ static irqreturn_t cs42l42_irq_thread(int irq, void *data) mutex_lock(&cs42l42->jack_detect_mutex); - /* Check auto-detect status */ + /* + * Check auto-detect status. Don't assume a previous unplug event has + * cleared the flags. If the jack is unplugged and plugged during + * system suspend there won't have been an unplug event. + */ if ((~masks[5]) & irq_params_table[5].mask) { if (stickies[5] & CS42L42_HSDET_AUTO_DONE_MASK) { cs42l42_process_hs_type_detect(cs42l42); @@ -1638,11 +1642,15 @@ static irqreturn_t cs42l42_irq_thread(int irq, void *data) case CS42L42_PLUG_CTIA: case CS42L42_PLUG_OMTP: snd_soc_jack_report(cs42l42->jack, SND_JACK_HEADSET, - SND_JACK_HEADSET); + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); break; case CS42L42_PLUG_HEADPHONE: snd_soc_jack_report(cs42l42->jack, SND_JACK_HEADPHONE, - SND_JACK_HEADPHONE); + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); break; default: break; -- 2.34.1

1 0

[PATCH AUTOSEL 5.16 06/59] ASoC: sh: rz-ssi: Make the data structures available before registering the handlers
by Sasha Levin 30 Mar '22

30 Mar '22

From: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> [ Upstream commit 0788785c78342d422f93b1c9831c2b2b7f137937 ] Initialize the spinlock and make the data structures available before registering the interrupt handlers. Reported-by: Pavel Machek <pavel(a)denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz(a)bp.renesas.com> Link: https://lore.kernel.org/r/20220110094711.8574-3-prabhakar.mahadev-lad.rj@bp… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sh/rz-ssi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/sh/rz-ssi.c b/sound/soc/sh/rz-ssi.c index fa0cc08f70ec..f6ba00bfcc80 100644 --- a/sound/soc/sh/rz-ssi.c +++ b/sound/soc/sh/rz-ssi.c @@ -975,6 +975,9 @@ static int rz_ssi_probe(struct platform_device *pdev) ssi->playback.priv = ssi; ssi->capture.priv = ssi; + spin_lock_init(&ssi->lock); + dev_set_drvdata(&pdev->dev, ssi); + /* Error Interrupt */ ssi->irq_int = platform_get_irq_byname(pdev, "int_req"); if (ssi->irq_int < 0) @@ -1022,8 +1025,6 @@ static int rz_ssi_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); pm_runtime_resume_and_get(&pdev->dev); - spin_lock_init(&ssi->lock); - dev_set_drvdata(&pdev->dev, ssi); ret = devm_snd_soc_register_component(&pdev->dev, &rz_ssi_soc_component, rz_ssi_soc_dai, ARRAY_SIZE(rz_ssi_soc_dai)); -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 66/66] ALSA: hda/realtek: Add alc256-samsung-headphone fixup
by Sasha Levin 30 Mar '22

30 Mar '22

From: Matt Kramer <mccleetus(a)gmail.com> [ Upstream commit ef248d9bd616b04df8be25539a4dc5db4b6c56f4 ] This fixes the near-silence of the headphone jack on the ALC256-based Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found through trial and error, using known ALC298 hacks as inspiration. The fixup is auto-enabled only when the NP730QCJ is detected. It can be manually enabled using model=alc256-samsung-headphone. Signed-off-by: Matt Kramer <mccleetus(a)gmail.com> Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- Documentation/sound/hd-audio/models.rst | 4 ++++ sound/pci/hda/patch_realtek.c | 11 +++++++++++ 2 files changed, 15 insertions(+) diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst index d25335993e55..9b52f50a6854 100644 --- a/Documentation/sound/hd-audio/models.rst +++ b/Documentation/sound/hd-audio/models.rst @@ -261,6 +261,10 @@ alc-sense-combo huawei-mbx-stereo Enable initialization verbs for Huawei MBX stereo speakers; might be risky, try this at your own risk +alc298-samsung-headphone + Samsung laptops with ALC298 +alc256-samsung-headphone + Samsung laptops with ALC256 ALC66x/67x/892 ============== diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 75ff7e8498b8..2230b0e92e43 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6948,6 +6948,7 @@ enum { ALC236_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF, ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, + ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, ALC295_FIXUP_ASUS_MIC_NO_PRESENCE, ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS, ALC269VC_FIXUP_ACER_HEADSET_MIC, @@ -8273,6 +8274,14 @@ static const struct hda_fixup alc269_fixups[] = { { } }, }, + [ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x20, AC_VERB_SET_COEF_INDEX, 0x08}, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2fcf}, + { } + }, + }, [ALC295_FIXUP_ASUS_MIC_NO_PRESENCE] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -9054,6 +9063,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8), SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), + SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC), @@ -9400,6 +9410,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"}, {.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"}, {.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"}, + {.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256-samsung-headphone"}, {.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"}, {.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"}, {.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"}, -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 63/66] ASoC: mediatek: Fix error handling in mt8183_da7219_max98357_dev_probe
by Sasha Levin 30 Mar '22

30 Mar '22

From: Miaoqian Lin <linmq006(a)gmail.com> [ Upstream commit 28a265a1ee11febeec5ea73a804f30dcec3181ca ] The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error paths. Fix this by calling of_node_put() in error handling too. Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> Reviewed-by: Tzung-Bi Shih <tzungbi(a)kernel.org> Link: https://lore.kernel.org/r/20220316014059.19292-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../mediatek/mt8183/mt8183-da7219-max98357.c | 23 +++++++++++++------ 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c index 718505c75418..f090dee0c7a4 100644 --- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c +++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c @@ -695,8 +695,11 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev) } card = (struct snd_soc_card *)of_device_get_match_data(&pdev->dev); - if (!card) - return -EINVAL; + if (!card) { + ret = -EINVAL; + goto put_platform_node; + } + card->dev = &pdev->dev; hdmi_codec = of_parse_phandle(pdev->dev.of_node, @@ -761,12 +764,15 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev) if (!mt8183_da7219_max98357_headset_dev.dlc.of_node) { dev_err(&pdev->dev, "Property 'mediatek,headset-codec' missing/invalid\n"); - return -EINVAL; + ret = -EINVAL; + goto put_hdmi_codec; } priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; + if (!priv) { + ret = -ENOMEM; + goto put_hdmi_codec; + } snd_soc_card_set_drvdata(card, priv); @@ -775,13 +781,16 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev) ret = PTR_ERR(pinctrl); dev_err(&pdev->dev, "%s failed to select default state %d\n", __func__, ret); - return ret; + goto put_hdmi_codec; } ret = devm_snd_soc_register_card(&pdev->dev, card); - of_node_put(platform_node); + +put_hdmi_codec: of_node_put(hdmi_codec); +put_platform_node: + of_node_put(platform_node); return ret; } -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 60/66] ASoC: Intel: sof_es8336: log all quirks
by Sasha Levin 30 Mar '22

30 Mar '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 9c818d849192491a8799b1cb14ca0f7aead4fb09 ] We only logged the SSP quirk, make sure the GPIO and DMIC quirks are exposed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20220308192610.392950-16-pierre-louis.bossart@lin… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/sof_es8336.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c index 46e453915f82..764560439d46 100644 --- a/sound/soc/intel/boards/sof_es8336.c +++ b/sound/soc/intel/boards/sof_es8336.c @@ -63,7 +63,12 @@ static const struct acpi_gpio_mapping *gpio_mapping = acpi_es8336_gpios; static void log_quirks(struct device *dev) { - dev_info(dev, "quirk SSP%ld", SOF_ES8336_SSP_CODEC(quirk)); + dev_info(dev, "quirk mask %#lx\n", quirk); + dev_info(dev, "quirk SSP%ld\n", SOF_ES8336_SSP_CODEC(quirk)); + if (quirk & SOF_ES8336_ENABLE_DMIC) + dev_info(dev, "quirk DMIC enabled\n"); + if (quirk & SOF_ES8336_TGL_GPIO_QUIRK) + dev_info(dev, "quirk TGL GPIO enabled\n"); } static int sof_es8316_speaker_power_event(struct snd_soc_dapm_widget *w, -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 59/66] ASoC: Intel: sof_es8336: use NHLT information to set dmic and SSP
by Sasha Levin 30 Mar '22

30 Mar '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 651c304df7f6e3fbb4779527efa3eb128ef91329 ] Since we see a proliferation of devices with various configurations, we want to automatically set the DMIC and SSP information. This patch relies on the information extracted from NHLT and partially reverts existing DMI quirks added by commit a164137ce91a ("ASoC: Intel: add machine driver for SOF+ES8336") Note that NHLT can report multiple SSPs, choosing from the ssp_link_mask in an MSB-first manner was found experimentally to work fine. The only thing that cannot be detected is the GPIO type, and users may want to use the quirk override parameter if the 'wrong' solution is provided. Tested-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20220308192610.392950-15-pierre-louis.bossart@lin… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/sof_es8336.c | 56 +++++++++++++++++++++-------- 1 file changed, 41 insertions(+), 15 deletions(-) diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c index 20d577eaab6d..46e453915f82 100644 --- a/sound/soc/intel/boards/sof_es8336.c +++ b/sound/soc/intel/boards/sof_es8336.c @@ -228,24 +228,25 @@ static int sof_es8336_quirk_cb(const struct dmi_system_id *id) return 1; } +/* + * this table should only be used to add GPIO or jack-detection quirks + * that cannot be detected from ACPI tables. The SSP and DMIC + * information are providing by the platform driver and are aligned + * with the topology used. + * + * If the GPIO support is missing, the quirk parameter can be used to + * enable speakers. In that case it's recommended to keep the SSP and DMIC + * information consistent, overriding the SSP and DMIC can only be done + * if the topology file is modified as well. + */ static const struct dmi_system_id sof_es8336_quirk_table[] = { - { - .callback = sof_es8336_quirk_cb, - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "CHUWI Innovation And Technology"), - DMI_MATCH(DMI_BOARD_NAME, "Hi10 X"), - }, - .driver_data = (void *)SOF_ES8336_SSP_CODEC(2) - }, { .callback = sof_es8336_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IP3 tech"), DMI_MATCH(DMI_BOARD_NAME, "WN1"), }, - .driver_data = (void *)(SOF_ES8336_SSP_CODEC(0) | - SOF_ES8336_TGL_GPIO_QUIRK | - SOF_ES8336_ENABLE_DMIC) + .driver_data = (void *)(SOF_ES8336_TGL_GPIO_QUIRK) }, {} }; @@ -470,11 +471,33 @@ static int sof_es8336_probe(struct platform_device *pdev) card = &sof_es8336_card; card->dev = dev; - if (!dmi_check_system(sof_es8336_quirk_table)) - quirk = SOF_ES8336_SSP_CODEC(2); + /* check GPIO DMI quirks */ + dmi_check_system(sof_es8336_quirk_table); - if (quirk & SOF_ES8336_ENABLE_DMIC) - dmic_be_num = 2; + if (!mach->mach_params.i2s_link_mask) { + dev_warn(dev, "No I2S link information provided, using SSP0. This may need to be modified with the quirk module parameter\n"); + } else { + /* + * Set configuration based on platform NHLT. + * In this machine driver, we can only support one SSP for the + * ES8336 link, the else-if below are intentional. + * In some cases multiple SSPs can be reported by NHLT, starting MSB-first + * seems to pick the right connection. + */ + unsigned long ssp = 0; + + if (mach->mach_params.i2s_link_mask & BIT(2)) + ssp = SOF_ES8336_SSP_CODEC(2); + else if (mach->mach_params.i2s_link_mask & BIT(1)) + ssp = SOF_ES8336_SSP_CODEC(1); + else if (mach->mach_params.i2s_link_mask & BIT(0)) + ssp = SOF_ES8336_SSP_CODEC(0); + + quirk |= ssp; + } + + if (mach->mach_params.dmic_num) + quirk |= SOF_ES8336_ENABLE_DMIC; if (quirk_override != -1) { dev_info(dev, "Overriding quirk 0x%lx => 0x%x\n", @@ -483,6 +506,9 @@ static int sof_es8336_probe(struct platform_device *pdev) } log_quirks(dev); + if (quirk & SOF_ES8336_ENABLE_DMIC) + dmic_be_num = 2; + sof_es8336_card.num_links += dmic_be_num + hdmi_num; dai_links = sof_card_dai_links_create(dev, SOF_ES8336_SSP_CODEC(quirk), -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 57/66] ALSA: intel-dspconfig: add ES8336 support for CNL
by Sasha Levin 30 Mar '22

30 Mar '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit cded07a2dccd5493696a3adce175f01e413423c6 ] We're missing this check for the CNL PCI id Reported-by: Nikolai Kostrigin <nickel(a)altlinux.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Acked-by: Takashi Iwai <tiwai(a)suse.de> Link: https://lore.kernel.org/r/20220308192610.392950-10-pierre-louis.bossart@lin… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/hda/intel-dsp-config.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index b9b7bf5a5553..70fd8b13938e 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -199,6 +199,11 @@ static const struct config_entry config_table[] = { {} } }, + { + .flags = FLAG_SOF, + .device = 0x09dc8, + .codec_hid = &essx_83x6, + }, { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, .device = 0x9dc8, -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 56/66] ASoC: Intel: soc-acpi: add more ACPI HIDs for ES83x6 devices
by Sasha Levin 30 Mar '22

30 Mar '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 1cedb6eabf0f2dd8285d3bb0ce1abd2369529084 ] We only saw ESSX8336 so far, but now with reports of 'ESSX8326' we need to expand to a full list. Let's reuse the 'snd_soc_acpi_codecs' structure to store the information. Note that ES8326 will need a dedicated codec driver, but the plan is to use the same machine driver for all Everest Audio devices. Reported-by: anthony tonitch <d.tonitch(a)gmail.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20220308192610.392950-9-pierre-louis.bossart@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/common/soc-acpi-intel-bxt-match.c | 7 ++++++- sound/soc/intel/common/soc-acpi-intel-cml-match.c | 7 ++++++- sound/soc/intel/common/soc-acpi-intel-glk-match.c | 7 ++++++- sound/soc/intel/common/soc-acpi-intel-jsl-match.c | 7 ++++++- sound/soc/intel/common/soc-acpi-intel-tgl-match.c | 7 ++++++- 5 files changed, 30 insertions(+), 5 deletions(-) diff --git a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c index 342d34052204..04a92e74d99b 100644 --- a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c @@ -41,6 +41,11 @@ static struct snd_soc_acpi_mach *apl_quirk(void *arg) return mach; } +static const struct snd_soc_acpi_codecs essx_83x6 = { + .num_codecs = 3, + .codecs = { "ESSX8316", "ESSX8326", "ESSX8336"}, +}; + static const struct snd_soc_acpi_codecs bxt_codecs = { .num_codecs = 1, .codecs = {"MX98357A"} @@ -83,7 +88,7 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_bxt_machines[] = { .sof_tplg_filename = "sof-apl-tdf8532.tplg", }, { - .id = "ESSX8336", + .comp_ids = &essx_83x6, .drv_name = "sof-essx8336", .sof_fw_filename = "sof-apl.ri", .sof_tplg_filename = "sof-apl-es8336.tplg", diff --git a/sound/soc/intel/common/soc-acpi-intel-cml-match.c b/sound/soc/intel/common/soc-acpi-intel-cml-match.c index 4eebc79d4b48..14395833d89e 100644 --- a/sound/soc/intel/common/soc-acpi-intel-cml-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-cml-match.c @@ -9,6 +9,11 @@ #include <sound/soc-acpi.h> #include <sound/soc-acpi-intel-match.h> +static const struct snd_soc_acpi_codecs essx_83x6 = { + .num_codecs = 3, + .codecs = { "ESSX8316", "ESSX8326", "ESSX8336"}, +}; + static const struct snd_soc_acpi_codecs rt1011_spk_codecs = { .num_codecs = 1, .codecs = {"10EC1011"} @@ -82,7 +87,7 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cml_machines[] = { .sof_tplg_filename = "sof-cml-da7219-max98390.tplg", }, { - .id = "ESSX8336", + .comp_ids = &essx_83x6, .drv_name = "sof-essx8336", .sof_fw_filename = "sof-cml.ri", .sof_tplg_filename = "sof-cml-es8336.tplg", diff --git a/sound/soc/intel/common/soc-acpi-intel-glk-match.c b/sound/soc/intel/common/soc-acpi-intel-glk-match.c index 8492b7e2a945..7aa6a870d5a5 100644 --- a/sound/soc/intel/common/soc-acpi-intel-glk-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-glk-match.c @@ -9,6 +9,11 @@ #include <sound/soc-acpi.h> #include <sound/soc-acpi-intel-match.h> +static const struct snd_soc_acpi_codecs essx_83x6 = { + .num_codecs = 3, + .codecs = { "ESSX8316", "ESSX8326", "ESSX8336"}, +}; + static const struct snd_soc_acpi_codecs glk_codecs = { .num_codecs = 1, .codecs = {"MX98357A"} @@ -58,7 +63,7 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_glk_machines[] = { .sof_tplg_filename = "sof-glk-cs42l42.tplg", }, { - .id = "ESSX8336", + .comp_ids = &essx_83x6, .drv_name = "sof-essx8336", .sof_fw_filename = "sof-glk.ri", .sof_tplg_filename = "sof-glk-es8336.tplg", diff --git a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c index 278ec196da7b..9d0d0e1437a4 100644 --- a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c @@ -9,6 +9,11 @@ #include <sound/soc-acpi.h> #include <sound/soc-acpi-intel-match.h> +static const struct snd_soc_acpi_codecs essx_83x6 = { + .num_codecs = 3, + .codecs = { "ESSX8316", "ESSX8326", "ESSX8336"}, +}; + static const struct snd_soc_acpi_codecs jsl_7219_98373_codecs = { .num_codecs = 1, .codecs = {"MX98373"} @@ -87,7 +92,7 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_jsl_machines[] = { .sof_tplg_filename = "sof-jsl-cs42l42-mx98360a.tplg", }, { - .id = "ESSX8336", + .comp_ids = &essx_83x6, .drv_name = "sof-essx8336", .sof_fw_filename = "sof-jsl.ri", .sof_tplg_filename = "sof-jsl-es8336.tplg", diff --git a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c index da31bb3cca17..e2658bca6931 100644 --- a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c @@ -10,6 +10,11 @@ #include <sound/soc-acpi-intel-match.h> #include "soc-acpi-intel-sdw-mockup-match.h" +static const struct snd_soc_acpi_codecs essx_83x6 = { + .num_codecs = 3, + .codecs = { "ESSX8316", "ESSX8326", "ESSX8336"}, +}; + static const struct snd_soc_acpi_codecs tgl_codecs = { .num_codecs = 1, .codecs = {"MX98357A"} @@ -389,7 +394,7 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[] = { .sof_tplg_filename = "sof-tgl-rt1011-rt5682.tplg", }, { - .id = "ESSX8336", + .comp_ids = &essx_83x6, .drv_name = "sof-essx8336", .sof_fw_filename = "sof-tgl.ri", .sof_tplg_filename = "sof-tgl-es8336.tplg", -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 55/66] ALSA: intel-dsp-config: add more ACPI HIDs for ES83x6 devices
by Sasha Levin 30 Mar '22

30 Mar '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit de24d97fb845ffd2229811ee256438e42b5a8d12 ] We only saw ESSX8336 so far, but now with reports of 'ESSX8326' we need to expand to a full list. Let's reuse the 'snd_soc_acpi_codecs' structure to store the information. Reported-by: anthony tonitch <d.tonitch(a)gmail.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Acked-by: Takashi Iwai <tiwai(a)suse.de> Link: https://lore.kernel.org/r/20220308192610.392950-8-pierre-louis.bossart@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/hda/intel-dsp-config.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index 4fb90ceb4053..b9b7bf5a5553 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -11,6 +11,7 @@ #include <sound/core.h> #include <sound/intel-dsp-config.h> #include <sound/intel-nhlt.h> +#include <sound/soc-acpi.h> static int dsp_driver; @@ -31,7 +32,12 @@ struct config_entry { u16 device; u8 acpi_hid[ACPI_ID_LEN]; const struct dmi_system_id *dmi_table; - u8 codec_hid[ACPI_ID_LEN]; + const struct snd_soc_acpi_codecs *codec_hid; +}; + +static const struct snd_soc_acpi_codecs __maybe_unused essx_83x6 = { + .num_codecs = 3, + .codecs = { "ESSX8316", "ESSX8326", "ESSX8336"}, }; /* @@ -77,7 +83,7 @@ static const struct config_entry config_table[] = { { .flags = FLAG_SOF, .device = 0x5a98, - .codec_hid = "ESSX8336", + .codec_hid = &essx_83x6, }, #endif #if IS_ENABLED(CONFIG_SND_SOC_INTEL_APL) @@ -163,7 +169,7 @@ static const struct config_entry config_table[] = { { .flags = FLAG_SOF, .device = 0x3198, - .codec_hid = "ESSX8336", + .codec_hid = &essx_83x6, }, #endif @@ -251,7 +257,7 @@ static const struct config_entry config_table[] = { { .flags = FLAG_SOF, .device = 0x02c8, - .codec_hid = "ESSX8336", + .codec_hid = &essx_83x6, }, { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, @@ -280,7 +286,7 @@ static const struct config_entry config_table[] = { { .flags = FLAG_SOF, .device = 0x06c8, - .codec_hid = "ESSX8336", + .codec_hid = &essx_83x6, }, { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, @@ -327,7 +333,7 @@ static const struct config_entry config_table[] = { { .flags = FLAG_SOF, .device = 0x4dc8, - .codec_hid = "ESSX8336", + .codec_hid = &essx_83x6, }, { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC, @@ -353,7 +359,7 @@ static const struct config_entry config_table[] = { { .flags = FLAG_SOF, .device = 0xa0c8, - .codec_hid = "ESSX8336", + .codec_hid = &essx_83x6, }, { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, @@ -414,8 +420,15 @@ static const struct config_entry *snd_intel_dsp_find_config continue; if (table->dmi_table && !dmi_check_system(table->dmi_table)) continue; - if (table->codec_hid[0] && !acpi_dev_present(table->codec_hid, NULL, -1)) - continue; + if (table->codec_hid) { + int i; + + for (i = 0; i < table->codec_hid->num_codecs; i++) + if (acpi_dev_present(table->codec_hid->codecs[i], NULL, -1)) + break; + if (i == table->codec_hid->num_codecs) + continue; + } return table; } return NULL; -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 54/66] ALSA: intel-nhlt: add helper to detect SSP link mask
by Sasha Levin 30 Mar '22

30 Mar '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 0c470db0399e17310ed2ba54dd1c25cfa16ce0d3 ] The NHLT information can be used to figure out which SSPs are enabled in a platform. The 'SSP' link type is too broad for machine drivers, since it can cover the Bluetooth sideband and the analog audio codec connections, so this helper exposes a parameter to filter with the device type (DEVICE_I2S refers to analog audio codec in NHLT parlance). The helper returns a mask, since more than one SSP may be used for analog audio, e.g. the NHLT spec describes the use of SSP0 for amplifiers and SSP1 for headset codec. Note that if more than one bit is set, it's impossible to determine which SSP is connected to what external component. Additional platform-specific information based on e.g. DMI quirks would still be required in the machine driver to configure the relevant dailinks. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Acked-by: Takashi Iwai <tiwai(a)suse.de> Link: https://lore.kernel.org/r/20220308192610.392950-5-pierre-louis.bossart@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- include/sound/intel-nhlt.h | 22 +++++++++++++++------- sound/hda/intel-nhlt.c | 22 ++++++++++++++++++++++ 2 files changed, 37 insertions(+), 7 deletions(-) diff --git a/include/sound/intel-nhlt.h b/include/sound/intel-nhlt.h index 089a760d36eb..6fb2d5e378fd 100644 --- a/include/sound/intel-nhlt.h +++ b/include/sound/intel-nhlt.h @@ -18,6 +18,13 @@ enum nhlt_link_type { NHLT_LINK_INVALID }; +enum nhlt_device_type { + NHLT_DEVICE_BT = 0, + NHLT_DEVICE_DMIC = 1, + NHLT_DEVICE_I2S = 4, + NHLT_DEVICE_INVALID +}; + #if IS_ENABLED(CONFIG_ACPI) && IS_ENABLED(CONFIG_SND_INTEL_NHLT) struct wav_fmt { @@ -41,13 +48,6 @@ struct wav_fmt_ext { u8 sub_fmt[16]; } __packed; -enum nhlt_device_type { - NHLT_DEVICE_BT = 0, - NHLT_DEVICE_DMIC = 1, - NHLT_DEVICE_I2S = 4, - NHLT_DEVICE_INVALID -}; - struct nhlt_specific_cfg { u32 size; u8 caps[]; @@ -133,6 +133,9 @@ void intel_nhlt_free(struct nhlt_acpi_table *addr); int intel_nhlt_get_dmic_geo(struct device *dev, struct nhlt_acpi_table *nhlt); bool intel_nhlt_has_endpoint_type(struct nhlt_acpi_table *nhlt, u8 link_type); + +int intel_nhlt_ssp_endpoint_mask(struct nhlt_acpi_table *nhlt, u8 device_type); + struct nhlt_specific_cfg * intel_nhlt_get_endpoint_blob(struct device *dev, struct nhlt_acpi_table *nhlt, u32 bus_id, u8 link_type, u8 vbps, u8 bps, @@ -163,6 +166,11 @@ static inline bool intel_nhlt_has_endpoint_type(struct nhlt_acpi_table *nhlt, return false; } +static inline int intel_nhlt_ssp_endpoint_mask(struct nhlt_acpi_table *nhlt, u8 device_type) +{ + return 0; +} + static inline struct nhlt_specific_cfg * intel_nhlt_get_endpoint_blob(struct device *dev, struct nhlt_acpi_table *nhlt, u32 bus_id, u8 link_type, u8 vbps, u8 bps, diff --git a/sound/hda/intel-nhlt.c b/sound/hda/intel-nhlt.c index 128476aa7c61..4063da378283 100644 --- a/sound/hda/intel-nhlt.c +++ b/sound/hda/intel-nhlt.c @@ -130,6 +130,28 @@ bool intel_nhlt_has_endpoint_type(struct nhlt_acpi_table *nhlt, u8 link_type) } EXPORT_SYMBOL(intel_nhlt_has_endpoint_type); +int intel_nhlt_ssp_endpoint_mask(struct nhlt_acpi_table *nhlt, u8 device_type) +{ + struct nhlt_endpoint *epnt; + int ssp_mask = 0; + int i; + + if (!nhlt || (device_type != NHLT_DEVICE_BT && device_type != NHLT_DEVICE_I2S)) + return 0; + + epnt = (struct nhlt_endpoint *)nhlt->desc; + for (i = 0; i < nhlt->endpoint_count; i++) { + if (epnt->linktype == NHLT_LINK_SSP && epnt->device_type == device_type) { + /* for SSP the virtual bus id is the SSP port */ + ssp_mask |= BIT(epnt->virtual_bus_id); + } + epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length); + } + + return ssp_mask; +} +EXPORT_SYMBOL(intel_nhlt_ssp_endpoint_mask); + static struct nhlt_specific_cfg * nhlt_get_specific_cfg(struct device *dev, struct nhlt_fmt *fmt, u8 num_ch, u32 rate, u8 vbps, u8 bps) -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 53/66] ASoC: SOF: Intel: hda: retrieve DMIC number for I2S boards
by Sasha Levin 30 Mar '22

30 Mar '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 92c1b7c0f780f0084f7b114be316ae4e182676e5 ] We currently extract the DMIC number only for HDaudio or SoundWire platforms. For I2S/TDM platforms, this wasn't necessary until now, but with devices with ES8336 we need to find a solution to detect dmics more reliably than with a DMI quirk. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20220308192610.392950-4-pierre-louis.bossart@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/hda.c | 46 +++++++++++++++++++++------------------ 1 file changed, 25 insertions(+), 21 deletions(-) diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index 848d1d563170..028751549f6d 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -432,11 +432,9 @@ static char *hda_model; module_param(hda_model, charp, 0444); MODULE_PARM_DESC(hda_model, "Use the given HDA board model."); -#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) || IS_ENABLED(CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE) -static int hda_dmic_num = -1; -module_param_named(dmic_num, hda_dmic_num, int, 0444); +static int dmic_num_override = -1; +module_param_named(dmic_num, dmic_num_override, int, 0444); MODULE_PARM_DESC(dmic_num, "SOF HDA DMIC number"); -#endif #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) static bool hda_codec_use_common_hdmi = IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI); @@ -644,24 +642,35 @@ static int hda_init(struct snd_sof_dev *sdev) return ret; } -#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) || IS_ENABLED(CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE) - -static int check_nhlt_dmic(struct snd_sof_dev *sdev) +static int check_dmic_num(struct snd_sof_dev *sdev) { struct nhlt_acpi_table *nhlt; - int dmic_num; + int dmic_num = 0; nhlt = intel_nhlt_init(sdev->dev); if (nhlt) { dmic_num = intel_nhlt_get_dmic_geo(sdev->dev, nhlt); intel_nhlt_free(nhlt); - if (dmic_num >= 1 && dmic_num <= 4) - return dmic_num; } - return 0; + /* allow for module parameter override */ + if (dmic_num_override != -1) { + dev_dbg(sdev->dev, + "overriding DMICs detected in NHLT tables %d by kernel param %d\n", + dmic_num, dmic_num_override); + dmic_num = dmic_num_override; + } + + if (dmic_num < 0 || dmic_num > 4) { + dev_dbg(sdev->dev, "invalid dmic_number %d\n", dmic_num); + dmic_num = 0; + } + + return dmic_num; } +#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA) || IS_ENABLED(CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE) + static const char *fixup_tplg_name(struct snd_sof_dev *sdev, const char *sof_tplg_filename, const char *idisp_str, @@ -697,16 +706,8 @@ static int dmic_topology_fixup(struct snd_sof_dev *sdev, const char *dmic_str; int dmic_num; - /* first check NHLT for DMICs */ - dmic_num = check_nhlt_dmic(sdev); - - /* allow for module parameter override */ - if (hda_dmic_num != -1) { - dev_dbg(sdev->dev, - "overriding DMICs detected in NHLT tables %d by kernel param %d\n", - dmic_num, hda_dmic_num); - dmic_num = hda_dmic_num; - } + /* first check for DMICs (using NHLT or module parameter) */ + dmic_num = check_dmic_num(sdev); switch (dmic_num) { case 1: @@ -1392,6 +1393,9 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev) if (!sof_pdata->tplg_filename) sof_pdata->tplg_filename = mach->sof_tplg_filename; + /* report to machine driver if any DMICs are found */ + mach->mach_params.dmic_num = check_dmic_num(sdev); + if (mach->link_mask) { mach->mach_params.links = mach->links; mach->mach_params.link_mask = mach->link_mask; -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 52/66] ASoC: Intel: sof_sdw: fix quirks for 2022 HP Spectre x360 13"
by Sasha Levin 30 Mar '22

30 Mar '22

From: Anthony I Gilea <i(a)cpp.in> [ Upstream commit ce73ef6ec67104d1fcc4c5911d77ce83288a0998 ] HP changed the DMI identification for 2022 devices: Product Name: HP Spectre x360 Conv 13-ap0001na Product Name: 8709 This patch relaxes the DMI_MATCH criterion to work with all versions of this product. Reviewed-by: Rander Wang <rander.wang(a)intel.com> Signed-off-by: Anthony I Gilea <i(a)cpp.in> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20220304204532.54675-4-pierre-louis.bossart@linux… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/dmi-quirks.c | 2 +- sound/soc/intel/boards/sof_sdw.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c index 0ca2a3e3a02e..747983743a14 100644 --- a/drivers/soundwire/dmi-quirks.c +++ b/drivers/soundwire/dmi-quirks.c @@ -59,7 +59,7 @@ static const struct dmi_system_id adr_remap_quirk_table[] = { { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Convertible"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Conv"), }, .driver_data = (void *)intel_tgl_bios, }, diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index da515eb1ddbe..1f00679b4240 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -185,7 +185,7 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = { .callback = sof_sdw_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Convertible"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x360 Conv"), }, .driver_data = (void *)(SOF_SDW_TGL_HDMI | SOF_SDW_PCH_DMIC | -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 51/66] ASoC: SOF: debug: clarify operator precedence
by Sasha Levin 30 Mar '22

30 Mar '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 9188812539d1d9a13dac690c95ec657259859ba4 ] cppcheck warning: for '&' and '?'. [clarifyCalculation] char *level = flags & SOF_DBG_DUMP_OPTIONAL ? KERN_DEBUG : KERN_ERR; ^ sound/soc/sof/debug.c:398:46: style: Clarify calculation precedence Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20220304205733.62233-10-pierre-louis.bossart@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/debug.c b/sound/soc/sof/debug.c index 6d6757075f7c..e755c0c5f86c 100644 --- a/sound/soc/sof/debug.c +++ b/sound/soc/sof/debug.c @@ -960,7 +960,7 @@ static void snd_sof_dbg_print_fw_state(struct snd_sof_dev *sdev, const char *lev void snd_sof_dsp_dbg_dump(struct snd_sof_dev *sdev, const char *msg, u32 flags) { - char *level = flags & SOF_DBG_DUMP_OPTIONAL ? KERN_DEBUG : KERN_ERR; + char *level = (flags & SOF_DBG_DUMP_OPTIONAL) ? KERN_DEBUG : KERN_ERR; bool print_all = sof_debug_check_flag(SOF_DBG_PRINT_ALL_DUMPS); if (flags & SOF_DBG_DUMP_OPTIONAL && !print_all) -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 46/66] ASoC: amd: vangogh: fix uninitialized symbol warning in machine driver
by Sasha Levin 30 Mar '22

30 Mar '22

From: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> [ Upstream commit 6f989800639a7a29ab9a02e165b04dc144dd4f2b ] Fixed below smatch static checker warning. sound/soc/amd/vangogh/acp5x-mach.c:190 acp5x_cs35l41_hw_params() error: uninitialized symbol 'ret'. Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> Link: https://lore.kernel.org/r/20220225193054.24916-4-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/amd/vangogh/acp5x-mach.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/amd/vangogh/acp5x-mach.c b/sound/soc/amd/vangogh/acp5x-mach.c index 14cf325e4b23..5d7a17755fa7 100644 --- a/sound/soc/amd/vangogh/acp5x-mach.c +++ b/sound/soc/amd/vangogh/acp5x-mach.c @@ -165,6 +165,7 @@ static int acp5x_cs35l41_hw_params(struct snd_pcm_substream *substream, unsigned int num_codecs = rtd->num_codecs; unsigned int bclk_val; + ret = 0; for (i = 0; i < num_codecs; i++) { codec_dai = asoc_rtd_to_codec(rtd, i); if ((strcmp(codec_dai->name, "spi-VLV1776:00") == 0) || -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 45/66] ASoC: amd: vg: fix for pm resume callback sequence
by Sasha Levin 30 Mar '22

30 Mar '22

From: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> [ Upstream commit 83b713619ee1b15e09eae11a92a7f3305534223d ] The previous condition is used to cross check only the active stream status for I2S HS instance playback and capture use cases. Modified logic to invoke sequence for two i2s controller instances. This also fixes warnings reported by kernel robot: "warning: variable 'frmt_val' set but not used" "warning: variable 'reg_val' set but not used" Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> Link: https://lore.kernel.org/r/20220225193054.24916-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/amd/vangogh/acp5x-pcm-dma.c | 66 +++++++++++++-------------- 1 file changed, 33 insertions(+), 33 deletions(-) diff --git a/sound/soc/amd/vangogh/acp5x-pcm-dma.c b/sound/soc/amd/vangogh/acp5x-pcm-dma.c index f10de38976cb..3aa2d9a36880 100644 --- a/sound/soc/amd/vangogh/acp5x-pcm-dma.c +++ b/sound/soc/amd/vangogh/acp5x-pcm-dma.c @@ -426,51 +426,51 @@ static int acp5x_audio_remove(struct platform_device *pdev) static int __maybe_unused acp5x_pcm_resume(struct device *dev) { struct i2s_dev_data *adata; - u32 val, reg_val, frmt_val; + struct i2s_stream_instance *rtd; + u32 val; - reg_val = 0; - frmt_val = 0; adata = dev_get_drvdata(dev); if (adata->play_stream && adata->play_stream->runtime) { - struct i2s_stream_instance *rtd = - adata->play_stream->runtime->private_data; + rtd = adata->play_stream->runtime->private_data; config_acp5x_dma(rtd, SNDRV_PCM_STREAM_PLAYBACK); - switch (rtd->i2s_instance) { - case I2S_HS_INSTANCE: - reg_val = ACP_HSTDM_ITER; - frmt_val = ACP_HSTDM_TXFRMT; - break; - case I2S_SP_INSTANCE: - default: - reg_val = ACP_I2STDM_ITER; - frmt_val = ACP_I2STDM_TXFRMT; + acp_writel((rtd->xfer_resolution << 3), rtd->acp5x_base + ACP_HSTDM_ITER); + if (adata->tdm_mode == TDM_ENABLE) { + acp_writel(adata->tdm_fmt, adata->acp5x_base + ACP_HSTDM_TXFRMT); + val = acp_readl(adata->acp5x_base + ACP_HSTDM_ITER); + acp_writel(val | 0x2, adata->acp5x_base + ACP_HSTDM_ITER); + } + } + if (adata->i2ssp_play_stream && adata->i2ssp_play_stream->runtime) { + rtd = adata->i2ssp_play_stream->runtime->private_data; + config_acp5x_dma(rtd, SNDRV_PCM_STREAM_PLAYBACK); + acp_writel((rtd->xfer_resolution << 3), rtd->acp5x_base + ACP_I2STDM_ITER); + if (adata->tdm_mode == TDM_ENABLE) { + acp_writel(adata->tdm_fmt, adata->acp5x_base + ACP_I2STDM_TXFRMT); + val = acp_readl(adata->acp5x_base + ACP_I2STDM_ITER); + acp_writel(val | 0x2, adata->acp5x_base + ACP_I2STDM_ITER); } - acp_writel((rtd->xfer_resolution << 3), - rtd->acp5x_base + reg_val); } if (adata->capture_stream && adata->capture_stream->runtime) { - struct i2s_stream_instance *rtd = - adata->capture_stream->runtime->private_data; + rtd = adata->capture_stream->runtime->private_data; config_acp5x_dma(rtd, SNDRV_PCM_STREAM_CAPTURE); - switch (rtd->i2s_instance) { - case I2S_HS_INSTANCE: - reg_val = ACP_HSTDM_IRER; - frmt_val = ACP_HSTDM_RXFRMT; - break; - case I2S_SP_INSTANCE: - default: - reg_val = ACP_I2STDM_IRER; - frmt_val = ACP_I2STDM_RXFRMT; + acp_writel((rtd->xfer_resolution << 3), rtd->acp5x_base + ACP_HSTDM_IRER); + if (adata->tdm_mode == TDM_ENABLE) { + acp_writel(adata->tdm_fmt, adata->acp5x_base + ACP_HSTDM_RXFRMT); + val = acp_readl(adata->acp5x_base + ACP_HSTDM_IRER); + acp_writel(val | 0x2, adata->acp5x_base + ACP_HSTDM_IRER); } - acp_writel((rtd->xfer_resolution << 3), - rtd->acp5x_base + reg_val); } - if (adata->tdm_mode == TDM_ENABLE) { - acp_writel(adata->tdm_fmt, adata->acp5x_base + frmt_val); - val = acp_readl(adata->acp5x_base + reg_val); - acp_writel(val | 0x2, adata->acp5x_base + reg_val); + if (adata->i2ssp_capture_stream && adata->i2ssp_capture_stream->runtime) { + rtd = adata->i2ssp_capture_stream->runtime->private_data; + config_acp5x_dma(rtd, SNDRV_PCM_STREAM_CAPTURE); + acp_writel((rtd->xfer_resolution << 3), rtd->acp5x_base + ACP_I2STDM_IRER); + if (adata->tdm_mode == TDM_ENABLE) { + acp_writel(adata->tdm_fmt, adata->acp5x_base + ACP_I2STDM_RXFRMT); + val = acp_readl(adata->acp5x_base + ACP_I2STDM_IRER); + acp_writel(val | 0x2, adata->acp5x_base + ACP_I2STDM_IRER); + } } acp_writel(1, adata->acp5x_base + ACP_EXTERNAL_INTR_ENB); return 0; -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 39/66] ASoC: rt5682s: Fix the wrong jack type detected
by Sasha Levin 30 Mar '22

30 Mar '22

From: Derek Fang <derek.fang(a)realtek.com> [ Upstream commit c07ac3ee76e5e5506bca9c03fbbb15e40ab28430 ] Some powers were changed during the jack insert detection and clk's enable/disable in CCF. If in parallel, the influence has a chance to detect the wrong jack type. We refer to the below commit of the variant codec (rt5682) to fix this issue. ASoC: rt5682: Fix deadlock on resume 1. Remove rt5682s_headset_detect in rt5682s_jd_check_handler and use jack_detect_work instead of. 2. Use dapm mutex used in CCF to protect most of jack_detect_work. Signed-off-by: Derek Fang <derek.fang(a)realtek.com> Link: https://lore.kernel.org/r/20220223101450.4577-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5682s.c | 26 +++++++++----------------- sound/soc/codecs/rt5682s.h | 1 - 2 files changed, 9 insertions(+), 18 deletions(-) diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index 1e662d1be2b3..92b8753f1267 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -822,6 +822,7 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) { struct rt5682s_priv *rt5682s = container_of(work, struct rt5682s_priv, jack_detect_work.work); + struct snd_soc_dapm_context *dapm; int val, btn_type; if (!rt5682s->component || !rt5682s->component->card || @@ -832,7 +833,9 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) return; } - mutex_lock(&rt5682s->jdet_mutex); + dapm = snd_soc_component_get_dapm(rt5682s->component); + + snd_soc_dapm_mutex_lock(dapm); mutex_lock(&rt5682s->calibrate_mutex); val = snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) @@ -889,6 +892,9 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) rt5682s->irq_work_delay_time = 50; } + mutex_unlock(&rt5682s->calibrate_mutex); + snd_soc_dapm_mutex_unlock(dapm); + snd_soc_jack_report(rt5682s->hs_jack, rt5682s->jack_type, SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3); @@ -898,9 +904,6 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) schedule_delayed_work(&rt5682s->jd_check_work, 0); else cancel_delayed_work_sync(&rt5682s->jd_check_work); - - mutex_unlock(&rt5682s->calibrate_mutex); - mutex_unlock(&rt5682s->jdet_mutex); } static void rt5682s_jd_check_handler(struct work_struct *work) @@ -908,14 +911,9 @@ static void rt5682s_jd_check_handler(struct work_struct *work) struct rt5682s_priv *rt5682s = container_of(work, struct rt5682s_priv, jd_check_work.work); - if (snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) - & RT5682S_JDH_RS_MASK) { + if (snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) & RT5682S_JDH_RS_MASK) { /* jack out */ - rt5682s->jack_type = rt5682s_headset_detect(rt5682s->component, 0); - - snd_soc_jack_report(rt5682s->hs_jack, rt5682s->jack_type, - SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3); + schedule_delayed_work(&rt5682s->jack_detect_work, 0); } else { schedule_delayed_work(&rt5682s->jd_check_work, 500); } @@ -1323,7 +1321,6 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - struct rt5682s_priv *rt5682s = snd_soc_component_get_drvdata(component); switch (event) { case SND_SOC_DAPM_POST_PMU: @@ -1339,8 +1336,6 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_11, 0x6666); snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_12, 0xa82a); - mutex_lock(&rt5682s->jdet_mutex); - snd_soc_component_update_bits(component, RT5682S_HP_CTRL_2, RT5682S_HPO_L_PATH_MASK | RT5682S_HPO_R_PATH_MASK | RT5682S_HPO_SEL_IP_EN_SW, RT5682S_HPO_L_PATH_EN | @@ -1348,8 +1343,6 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, usleep_range(5000, 10000); snd_soc_component_update_bits(component, RT5682S_HP_AMP_DET_CTL_1, RT5682S_CP_SW_SIZE_MASK, RT5682S_CP_SW_SIZE_L | RT5682S_CP_SW_SIZE_S); - - mutex_unlock(&rt5682s->jdet_mutex); break; case SND_SOC_DAPM_POST_PMD: @@ -3103,7 +3096,6 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c, mutex_init(&rt5682s->calibrate_mutex); mutex_init(&rt5682s->sar_mutex); - mutex_init(&rt5682s->jdet_mutex); rt5682s_calibrate(rt5682s); regmap_update_bits(rt5682s->regmap, RT5682S_MICBIAS_2, diff --git a/sound/soc/codecs/rt5682s.h b/sound/soc/codecs/rt5682s.h index 1bf2ef7ce578..397a2531b6f6 100644 --- a/sound/soc/codecs/rt5682s.h +++ b/sound/soc/codecs/rt5682s.h @@ -1446,7 +1446,6 @@ struct rt5682s_priv { struct delayed_work jd_check_work; struct mutex calibrate_mutex; struct mutex sar_mutex; - struct mutex jdet_mutex; #ifdef CONFIG_COMMON_CLK struct clk_hw dai_clks_hw[RT5682S_DAI_NUM_CLKS]; -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 36/66] ASoC: Intel: sof_es8336: add quirk for Huawei D15 2021
by Sasha Levin 30 Mar '22

30 Mar '22

From: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> [ Upstream commit ce6a70bfce21bb4edb7c0f29ecfb0522fa34ab71 ] Huawei D15 uses SSP_CODEC(0). Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Link: https://lore.kernel.org/r/d560a1c76edb633c37acf04a9a82518b6233a719.16403511… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/sof_es8336.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c index 20d577eaab6d..e6d599f0cd26 100644 --- a/sound/soc/intel/boards/sof_es8336.c +++ b/sound/soc/intel/boards/sof_es8336.c @@ -247,6 +247,14 @@ static const struct dmi_system_id sof_es8336_quirk_table[] = { SOF_ES8336_TGL_GPIO_QUIRK | SOF_ES8336_ENABLE_DMIC) }, + { + .callback = sof_es8336_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HUAWEI"), + DMI_MATCH(DMI_BOARD_NAME, "BOHB-WAX9-PCB-B2"), + }, + .driver_data = (void *)SOF_ES8336_SSP_CODEC(0) + }, {} }; -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 34/66] ASoC: soc-core: skip zero num_dai component in searching dai name
by Sasha Levin 30 Mar '22

30 Mar '22

From: Shengjiu Wang <shengjiu.wang(a)nxp.com> [ Upstream commit f7d344a2bd5ec81fbd1ce76928fd059e57ec9bea ] In the case like dmaengine which's not a dai but as a component, the num_dai is zero, dmaengine component has the same component_of_node as cpu dai, when cpu dai component is not ready, but dmaengine component is ready, try to get cpu dai name, the snd_soc_get_dai_name() return -EINVAL, not -EPROBE_DEFER, that cause below error: asoc-simple-card <card name>: parse error -22 asoc-simple-card: probe of <card name> failed with error -22 The sound card failed to probe. So this patch fixes the issue above by skipping the zero num_dai component in searching dai name. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> Link: https://lore.kernel.org/r/1644491952-7457-1-git-send-email-shengjiu.wang@nx… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 434e61b46983..a088bc9f7dd7 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3233,7 +3233,7 @@ int snd_soc_get_dai_name(const struct of_phandle_args *args, for_each_component(pos) { struct device_node *component_of_node = soc_component_to_node(pos); - if (component_of_node != args->np) + if (component_of_node != args->np || !pos->num_dai) continue; ret = snd_soc_component_of_xlate_dai_name(pos, args, dai_name); -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 24/66] ALSA: hda: Fix driver index handling at re-binding
by Sasha Levin 30 Mar '22

30 Mar '22

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 69458e2c27800da7697c87ed908b65323ef3f3bd ] HD-audio driver handles the multiple instances and keeps the static index that is incremented at each probe. This becomes a problem when user tries to re-bind the device via sysfs multiple times; as the device index isn't cleared unlike rmmod case, it points to the next element at re-binding, and eventually later you can't probe any more when it reaches to SNDRV_CARDS_MAX (usually 32). This patch is an attempt to improve the handling at rebinding. Instead of a static device index, now we keep a bitmap and assigns to the first zero bit position. At the driver remove, in return, the bitmap slot is cleared again, so that it'll be available for the next probe. Reported-by: Alexander Sergeyev <sergeev917(a)gmail.com> Link: https://lore.kernel.org/r/20220209081912.20687-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/hda_intel.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 572ff0d1fafe..8eff25d2d9e6 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2066,14 +2066,16 @@ static const struct hda_controller_ops pci_hda_ops = { .position_check = azx_position_check, }; +static DECLARE_BITMAP(probed_devs, SNDRV_CARDS); + static int azx_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) { - static int dev; struct snd_card *card; struct hda_intel *hda; struct azx *chip; bool schedule_probe; + int dev; int err; if (pci_match_id(driver_denylist, pci)) { @@ -2081,10 +2083,11 @@ static int azx_probe(struct pci_dev *pci, return -ENODEV; } + dev = find_first_zero_bit(probed_devs, SNDRV_CARDS); if (dev >= SNDRV_CARDS) return -ENODEV; if (!enable[dev]) { - dev++; + set_bit(dev, probed_devs); return -ENOENT; } @@ -2151,7 +2154,7 @@ static int azx_probe(struct pci_dev *pci, if (schedule_probe) schedule_delayed_work(&hda->probe_work, 0); - dev++; + set_bit(dev, probed_devs); if (chip->disabled) complete_all(&hda->probe_wait); return 0; @@ -2374,6 +2377,7 @@ static void azx_remove(struct pci_dev *pci) cancel_delayed_work_sync(&hda->probe_work); device_lock(&pci->dev); + clear_bit(chip->dev_index, probed_devs); pci_set_drvdata(pci, NULL); snd_card_free(card); } -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 20/66] ASoC: madera: Add dependencies on MFD
by Sasha Levin 30 Mar '22

30 Mar '22

From: Charles Keepax <ckeepax(a)opensource.cirrus.com> [ Upstream commit ec29170c724ca30305fc3a19ba2ee73ecac65509 ] The Madera CODECs use regmap_irq functions but nothing ensures that regmap_irq is built into the kernel. Add dependencies on the ASoC symbols for the relevant MFD component. There is no point in building the ASoC driver if the MFD doesn't support it and the MFD part contains the necessary dependencies to ensure everything is built into the kernel. Reported-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20220203115025.16464-1-ckeepax@opensource.cirrus.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index d3e5ae8310ef..30c00380499c 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -733,6 +733,7 @@ config SND_SOC_CS4349 config SND_SOC_CS47L15 tristate + depends on MFD_CS47L15 config SND_SOC_CS47L24 tristate @@ -740,15 +741,19 @@ config SND_SOC_CS47L24 config SND_SOC_CS47L35 tristate + depends on MFD_CS47L35 config SND_SOC_CS47L85 tristate + depends on MFD_CS47L85 config SND_SOC_CS47L90 tristate + depends on MFD_CS47L90 config SND_SOC_CS47L92 tristate + depends on MFD_CS47L92 # Cirrus Logic Quad-Channel ADC config SND_SOC_CS53L30 -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 10/66] ASoC: SOF: Intel: hda: Remove link assignment limitation
by Sasha Levin 30 Mar '22

30 Mar '22

From: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> [ Upstream commit 2ce0d008dcc59f9c01f43277b9f9743af7b01dad ] The limitation to assign a link DMA channel for a BE iff the corresponding host DMA channel is assigned to a connected FE is only applicable if the PROCEN_FMT_QUIRK is set. So, remove it for platforms that do not enable the quirk. Complements: a792bfc1c2bc ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround") Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20220128130017.28508-1-peter.ujfalusi@linux.intel… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/hda-dai.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c index cd12589355ef..28a54145c150 100644 --- a/sound/soc/sof/intel/hda-dai.c +++ b/sound/soc/sof/intel/hda-dai.c @@ -59,6 +59,8 @@ static struct hdac_ext_stream * { struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); struct sof_intel_hda_stream *hda_stream; + const struct sof_intel_dsp_desc *chip; + struct snd_sof_dev *sdev; struct hdac_ext_stream *res = NULL; struct hdac_stream *stream = NULL; @@ -77,9 +79,20 @@ static struct hdac_ext_stream * continue; hda_stream = hstream_to_sof_hda_stream(hstream); + sdev = hda_stream->sdev; + chip = get_chip_info(sdev->pdata); /* check if link is available */ if (!hstream->link_locked) { + /* + * choose the first available link for platforms that do not have the + * PROCEN_FMT_QUIRK set. + */ + if (!(chip->quirks & SOF_INTEL_PROCEN_FMT_QUIRK)) { + res = hstream; + break; + } + if (stream->opened) { /* * check if the stream tag matches the stream -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 08/66] ASoC: SOF: Intel: match sdw version on link_slaves_found
by Sasha Levin 30 Mar '22

30 Mar '22

From: Bard Liao <yung-chuan.liao(a)linux.intel.com> [ Upstream commit f67c0c0d3b9048d86ea6ae52e36a2b78c48f265d ] Codecs with the same part id, manufacturer id and part id, but different sdw version should be treated as different codecs. For example, rt711 and rt711-sdca are different. So, we should match sdw version as well. Reported-by: Reddy Muralidhar <muralidhar.reddy(a)intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20220120232157.199919-2-pierre-louis.bossart@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/hda.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index 1385695d7745..848d1d563170 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -1188,7 +1188,7 @@ static bool link_slaves_found(struct snd_sof_dev *sdev, struct hdac_bus *bus = sof_to_bus(sdev); struct sdw_intel_slave_id *ids = sdw->ids; int num_slaves = sdw->num_slaves; - unsigned int part_id, link_id, unique_id, mfg_id; + unsigned int part_id, link_id, unique_id, mfg_id, version; int i, j, k; for (i = 0; i < link->num_adr; i++) { @@ -1198,12 +1198,14 @@ static bool link_slaves_found(struct snd_sof_dev *sdev, mfg_id = SDW_MFG_ID(adr); part_id = SDW_PART_ID(adr); link_id = SDW_DISCO_LINK_ID(adr); + version = SDW_VERSION(adr); for (j = 0; j < num_slaves; j++) { /* find out how many identical parts were reported on that link */ if (ids[j].link_id == link_id && ids[j].id.part_id == part_id && - ids[j].id.mfg_id == mfg_id) + ids[j].id.mfg_id == mfg_id && + ids[j].id.sdw_version == version) reported_part_count++; } @@ -1212,21 +1214,24 @@ static bool link_slaves_found(struct snd_sof_dev *sdev, if (ids[j].link_id != link_id || ids[j].id.part_id != part_id || - ids[j].id.mfg_id != mfg_id) + ids[j].id.mfg_id != mfg_id || + ids[j].id.sdw_version != version) continue; /* find out how many identical parts are expected */ for (k = 0; k < link->num_adr; k++) { u64 adr2 = link->adr_d[k].adr; - unsigned int part_id2, link_id2, mfg_id2; + unsigned int part_id2, link_id2, mfg_id2, version2; mfg_id2 = SDW_MFG_ID(adr2); part_id2 = SDW_PART_ID(adr2); link_id2 = SDW_DISCO_LINK_ID(adr2); + version2 = SDW_VERSION(adr2); if (link_id2 == link_id && part_id2 == part_id && - mfg_id2 == mfg_id) + mfg_id2 == mfg_id && + version2 == version) expected_part_count++; } -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 07/66] ASoC: cs42l42: Report full jack status when plug is detected
by Sasha Levin 30 Mar '22

30 Mar '22

From: Richard Fitzgerald <rf(a)opensource.cirrus.com> [ Upstream commit 8d06f797f844d04a961f201f886f7f9985edc9bf ] When a plug event is detect report the full state of all status bits, don't assume that there will have been a previous unplug event to clear all the bits. Report the state of both HEADPHONE and MICROPHONE bits according to detected type, and clear all the button status bits. The current button status is already checked and reported at the end of the function. During a system suspend the jack could be unplugged and plugged, possibly changing the jack type. On resume the interrupt status will indicate a plug event - there will not be an unplug event to clear the bits. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20220121120412.672284-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/cs42l42.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 43d98bdb5b5b..2c294868008e 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -1637,7 +1637,11 @@ static irqreturn_t cs42l42_irq_thread(int irq, void *data) mutex_lock(&cs42l42->jack_detect_mutex); - /* Check auto-detect status */ + /* + * Check auto-detect status. Don't assume a previous unplug event has + * cleared the flags. If the jack is unplugged and plugged during + * system suspend there won't have been an unplug event. + */ if ((~masks[5]) & irq_params_table[5].mask) { if (stickies[5] & CS42L42_HSDET_AUTO_DONE_MASK) { cs42l42_process_hs_type_detect(cs42l42); @@ -1645,11 +1649,15 @@ static irqreturn_t cs42l42_irq_thread(int irq, void *data) case CS42L42_PLUG_CTIA: case CS42L42_PLUG_OMTP: snd_soc_jack_report(cs42l42->jack, SND_JACK_HEADSET, - SND_JACK_HEADSET); + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); break; case CS42L42_PLUG_HEADPHONE: snd_soc_jack_report(cs42l42->jack, SND_JACK_HEADPHONE, - SND_JACK_HEADPHONE); + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); break; default: break; -- 2.34.1

1 0

[PATCH AUTOSEL 5.17 06/66] ASoC: sh: rz-ssi: Make the data structures available before registering the handlers
by Sasha Levin 30 Mar '22

30 Mar '22

From: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> [ Upstream commit 0788785c78342d422f93b1c9831c2b2b7f137937 ] Initialize the spinlock and make the data structures available before registering the interrupt handlers. Reported-by: Pavel Machek <pavel(a)denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz(a)bp.renesas.com> Link: https://lore.kernel.org/r/20220110094711.8574-3-prabhakar.mahadev-lad.rj@bp… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sh/rz-ssi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/sh/rz-ssi.c b/sound/soc/sh/rz-ssi.c index e8d98b362f9d..28400dbc5c06 100644 --- a/sound/soc/sh/rz-ssi.c +++ b/sound/soc/sh/rz-ssi.c @@ -975,6 +975,9 @@ static int rz_ssi_probe(struct platform_device *pdev) ssi->playback.priv = ssi; ssi->capture.priv = ssi; + spin_lock_init(&ssi->lock); + dev_set_drvdata(&pdev->dev, ssi); + /* Error Interrupt */ ssi->irq_int = platform_get_irq_byname(pdev, "int_req"); if (ssi->irq_int < 0) @@ -1027,8 +1030,6 @@ static int rz_ssi_probe(struct platform_device *pdev) return dev_err_probe(ssi->dev, ret, "pm_runtime_resume_and_get failed\n"); } - spin_lock_init(&ssi->lock); - dev_set_drvdata(&pdev->dev, ssi); ret = devm_snd_soc_register_component(&pdev->dev, &rz_ssi_soc_component, rz_ssi_soc_dai, ARRAY_SIZE(rz_ssi_soc_dai)); -- 2.34.1

1 0

Focusrite Scarlett 8i6 silent input stream
by ZTube 30 Mar '22

30 Mar '22

I'm trying to get my Focusrite Scarlett 8i6 to run with alsa, however while the sound output to the device works fine, the input does not and merely delivers a silent stream. Since I can't find any reason for the input stream to be completely silent I suspect this might be a driver bug. $ arecord -D hw:0,0 -f S32_LE -r 48000 -c 10 | aplay just results in complete silence I'd be happy to provide more logs/detail if needed. Any idea what might be going on? Thanks, ZTube [alsa-info.sh] https://paste.debian.net/1236037/

3 2

[syzbot] possible deadlock in __snd_pcm_lib_xfer
by syzbot 30 Mar '22

30 Mar '22

Hello, syzbot found the following issue on: HEAD commit: 8515d05bf6bc Add linux-next specific files for 20220328 git tree: linux-next console output: https://syzkaller.appspot.com/x/log.txt?x=15c0acc7700000 kernel config: https://syzkaller.appspot.com/x/.config?x=530c68bef4e2b8a8 dashboard link: https://syzkaller.appspot.com/bug?extid=6e5c88838328e99c7e1c compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=14433ca5700000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=163bb77d700000 IMPORTANT: if you fix the issue, please add the following tag to the commit: Reported-by: syzbot+6e5c88838328e99c7e1c(a)syzkaller.appspotmail.com ====================================================== WARNING: possible circular locking dependency detected 5.17.0-next-20220328-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor329/3588 is trying to acquire lock: ffff8880243c1d28 (&mm->mmap_lock#2){++++}-{3:3}, at: __might_fault+0xa1/0x170 mm/memory.c:5300 but task is already holding lock: ffff88801afef230 (&runtime->buffer_mutex){+.+.}-{3:3}, at: wait_for_avail sound/core/pcm_lib.c:1913 [inline] ffff88801afef230 (&runtime->buffer_mutex){+.+.}-{3:3}, at: __snd_pcm_lib_xfer+0xbca/0x1e20 sound/core/pcm_lib.c:2263 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&runtime->buffer_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:600 [inline] __mutex_lock+0x12f/0x12f0 kernel/locking/mutex.c:733 snd_pcm_hw_params+0xc9/0x18a0 sound/core/pcm_native.c:705 snd_pcm_kernel_ioctl+0x164/0x310 sound/core/pcm_native.c:3410 snd_pcm_oss_change_params_locked+0x14e2/0x3a70 sound/core/oss/pcm_oss.c:976 snd_pcm_oss_change_params sound/core/oss/pcm_oss.c:1116 [inline] snd_pcm_oss_mmap+0x442/0x550 sound/core/oss/pcm_oss.c:2929 call_mmap include/linux/fs.h:2085 [inline] mmap_region+0xba5/0x14a0 mm/mmap.c:1791 do_mmap+0x863/0xfa0 mm/mmap.c:1582 vm_mmap_pgoff+0x1b7/0x290 mm/util.c:519 ksys_mmap_pgoff+0x40d/0x5a0 mm/mmap.c:1628 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&mm->mmap_lock#2){++++}-{3:3}: check_prev_add kernel/locking/lockdep.c:3096 [inline] check_prevs_add kernel/locking/lockdep.c:3219 [inline] validate_chain kernel/locking/lockdep.c:3834 [inline] __lock_acquire+0x2ac6/0x56c0 kernel/locking/lockdep.c:5060 lock_acquire kernel/locking/lockdep.c:5672 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5637 __might_fault mm/memory.c:5301 [inline] __might_fault+0x104/0x170 mm/memory.c:5294 _copy_to_user+0x25/0x140 lib/usercopy.c:28 copy_to_user include/linux/uaccess.h:160 [inline] default_read_copy+0x10f/0x180 sound/core/pcm_lib.c:2013 __snd_pcm_lib_xfer+0x1517/0x1e20 sound/core/pcm_lib.c:2282 snd_pcm_oss_read3+0x1c4/0x400 sound/core/oss/pcm_oss.c:1292 snd_pcm_oss_read2+0x300/0x3f0 sound/core/oss/pcm_oss.c:1503 snd_pcm_oss_read1 sound/core/oss/pcm_oss.c:1550 [inline] snd_pcm_oss_read+0x620/0x7a0 sound/core/oss/pcm_oss.c:2788 vfs_read+0x1ef/0x5d0 fs/read_write.c:480 ksys_read+0x127/0x250 fs/read_write.c:620 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&runtime->buffer_mutex); lock(&mm->mmap_lock#2); lock(&runtime->buffer_mutex); lock(&mm->mmap_lock#2); *** DEADLOCK *** 1 lock held by syz-executor329/3588: #0: ffff88801afef230 (&runtime->buffer_mutex){+.+.}-{3:3}, at: wait_for_avail sound/core/pcm_lib.c:1913 [inline] #0: ffff88801afef230 (&runtime->buffer_mutex){+.+.}-{3:3}, at: __snd_pcm_lib_xfer+0xbca/0x1e20 sound/core/pcm_lib.c:2263 stack backtrace: CPU: 0 PID: 3588 Comm: syz-executor329 Not tainted 5.17.0-next-20220328-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 check_noncircular+0x25f/0x2e0 kernel/locking/lockdep.c:2176 check_prev_add kernel/locking/lockdep.c:3096 [inline] check_prevs_add kernel/locking/lockdep.c:3219 [inline] validate_chain kernel/locking/lockdep.c:3834 [inline] __lock_acquire+0x2ac6/0x56c0 kernel/locking/lockdep.c:5060 lock_acquire kernel/locking/lockdep.c:5672 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5637 __might_fault mm/memory.c:5301 [inline] __might_fault+0x104/0x170 mm/memory.c:5294 _copy_to_user+0x25/0x140 lib/usercopy.c:28 copy_to_user include/linux/uaccess.h:160 [inline] default_read_copy+0x10f/0x180 sound/core/pcm_lib.c:2013 __snd_pcm_lib_xfer+0x1517/0x1e20 sound/core/pcm_lib.c:2282 snd_pcm_oss_read3+0x1c4/0x400 sound/core/oss/pcm_oss.c:1292 snd_pcm_oss_read2+0x300/0x3f0 sound/core/oss/pcm_oss.c:1503 snd_pcm_oss_read1 sound/core/oss/pcm_oss.c:1550 [inline] snd_pcm_oss_read+0x620/0x7a0 sound/core/oss/pcm_oss.c:2788 vfs_read+0x1ef/0x5d0 fs/read_write.c:480 ksys_read+0x127/0x250 fs/read_write.c:620 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f72068ad0f9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff51e1f1c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f72068ad0f9 RDX: 0000000000000ff2 RSI: 0000000020000780 RDI: 0000000000000004 RBP: 00007f72068710e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7206871170 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> --- This report is generated by a bot. It may contain errors. See https://goo.gl/tpsmEJ for more information about syzbot. syzbot engineers can be reached at syzkaller(a)googlegroups.com. syzbot will keep track of this issue. See: https://goo.gl/tpsmEJ#status for how to communicate with syzbot. syzbot can test patches for this issue, for details see: https://goo.gl/tpsmEJ#testing-patches

2 1

[PATCH] ALSA: hda: Avoid unsol event during RPM suspending
by Mohan Kumar 30 Mar '22

30 Mar '22

There is a corner case with unsol event handling during codec runtime suspending state. When the codec runtime suspend call initiated, the codec->in_pm atomic variable would be 0, currently the codec runtime suspend function calls snd_hdac_enter_pm() which will just increments the codec->in_pm atomic variable. Consider unsol event happened just after this step and before snd_hdac_leave_pm() in the codec runtime suspend function. The snd_hdac_power_up_pm() in the unsol event flow in hdmi_present_sense_via_verbs() function would just increment the codec->in_pm atomic variable without calling pm_runtime_get_sync function. As codec runtime suspend flow is already in progress and in parallel unsol event is also accessing the codec verbs, as soon as codec suspend flow completes and clocks are switched off before completing the unsol event handling as both functions doesn't wait for each other. This will result in below errors [ 589.428020] tegra-hda 3510000.hda: azx_get_response timeout, switching to polling mode: last cmd=0x505f2f57 [ 589.428344] tegra-hda 3510000.hda: spurious response 0x80000074:0x5, last cmd=0x505f2f57 [ 589.428547] tegra-hda 3510000.hda: spurious response 0x80000065:0x5, last cmd=0x505f2f57 To avoid this, the unsol event flow should not perform any codec verb related operations during RPM_SUSPENDING state. Signed-off-by: Mohan Kumar <mkumard(a)nvidia.com> --- sound/pci/hda/patch_hdmi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index c85ed7bc121e..3e086eebf88d 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1625,6 +1625,7 @@ static void hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin, struct hda_codec *codec = per_pin->codec; struct hdmi_spec *spec = codec->spec; struct hdmi_eld *eld = &spec->temp_eld; + struct device *dev = hda_codec_dev(codec); hda_nid_t pin_nid = per_pin->pin_nid; int dev_id = per_pin->dev_id; /* @@ -1638,8 +1639,13 @@ static void hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin, int present; int ret; +#ifdef CONFIG_PM + if (dev->power.runtime_status == RPM_SUSPENDING) + return; +#endif + ret = snd_hda_power_up_pm(codec); - if (ret < 0 && pm_runtime_suspended(hda_codec_dev(codec))) + if (ret < 0 && pm_runtime_suspended(dev)) goto out; present = snd_hda_jack_pin_sense(codec, pin_nid, dev_id); -- 2.17.1

2 1

[PATCH v2] ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
by Kai-Heng Feng 30 Mar '22

30 Mar '22

Commit 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue") is to solve recording issue met on AL236, by matching codec variant ALC269_TYPE_ALC257 and ALC269_TYPE_ALC256. This match can be too broad and Mi Notebook Pro 2020 is broken by the patch. Instead, use codec ID to be narrow down the scope, in order to make ALC256 unaffected. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215484 Fixes: 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue") Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- v2: Fix wrong comparison, || -> && sound/pci/hda/patch_realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4c33cb57963db..aace474a899de 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3617,8 +3617,8 @@ static void alc256_shutup(struct hda_codec *codec) /* If disable 3k pulldown control for alc257, the Mic detection will not work correctly * when booting with headset plugged. So skip setting it for the codec alc257 */ - if (spec->codec_variant != ALC269_TYPE_ALC257 && - spec->codec_variant != ALC269_TYPE_ALC256) + if (codec->core.vendor_id != 0x10ec0236 && + codec->core.vendor_id != 0x10ec0257) alc_update_coef_idx(codec, 0x46, 0, 3 << 12); if (!spec->no_shutup_pins) -- 2.34.1

2 1

[PATCH 0/2] rawmidi/meson: fix miscellaneous bugs
by GitHub pull_request - opened 30 Mar '22

30 Mar '22

alsa-project/alsa-gobject pull request #65 was opened from takaswie: This patchset fixes unintended two items below. * argument name against convention in this project * line break inner identifier in meson.build ``` Takashi Sakamoto (2): rawmidi: fix argument names with suffix '_id' meson: fix unintended line break for identifier src/rawmidi/query.c | 12 ++++++------ src/rawmidi/query.h | 2 +- src/seq/meson.build | 3 +-- 3 files changed, 8 insertions(+), 9 deletions(-) ``` Request URL : https://github.com/alsa-project/alsa-gobject/pull/65 Patch URL : https://github.com/alsa-project/alsa-gobject/pull/65.patch Repository URL: https://github.com/alsa-project/alsa-gobject

1 0

Fix support for sof-essx8336
by GitHub pull_request - opened 30 Mar '22

30 Mar '22

alsa-project/alsa-ucm-conf pull request #144 was opened from mchehab: There are a couple of issues at the support for sof-essx8336, causing it to fail working. This PR fix them. Tested on Huawei Matebook D15. Before the fix, the device was appearing as "sysdefault:0" instead of "hw:0", and there were several other problems. After the fix: - the device is now identified as hw:0; - calling alsamixer without `-Dsysdefault:0` (or `-Dhw:0`) now shows a mixer (instead of showing nothing); - The HDMI volume controls now appear; - Using `alsaucm load` now works fine. There are still a couple of things to be fixed, but I suspect that at least some of them would require firmware (or driver?) changes: - the internal microphone is not working yet; - the headphone/headset doesn't work. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/144 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/144.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Nhlt plugin and simple plugin interface
by GitHub pull_request - edited 29 Mar '22

29 Mar '22

alsa-project/alsa-utils pull request #129 was edited from juimonen: Initial something... I need to figure out: - where to specify which plugins to load/run (nhlt now hard coded) - where to install the plugins - how to get the to-be-loaded plugin names and where - is the "hidden-visibility" gcc flag ok to hide other than .so entrypoint Request URL : https://github.com/alsa-project/alsa-utils/pull/129 Patch URL : https://github.com/alsa-project/alsa-utils/pull/129.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH] ASoC: SOF: topology: use new sound control LED layer
by Jaroslav Kysela 29 Mar '22

29 Mar '22

Use the new sound control LED layer instead the direct ledtrig_audio_set() call - see 22d8de62f11b ("ALSA: control - add generic LED trigger module as the new control layer"). Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> Cc: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Cc: Bard Liao <yung-chuan.liao(a)linux.intel.com> Cc: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- sound/soc/sof/control.c | 33 --------------------------------- sound/soc/sof/topology.c | 10 ++++++++++ 2 files changed, 10 insertions(+), 33 deletions(-) diff --git a/sound/soc/sof/control.c b/sound/soc/sof/control.c index de1778c4002b..3b5718a3516d 100644 --- a/sound/soc/sof/control.c +++ b/sound/soc/sof/control.c @@ -15,36 +15,6 @@ #include "sof-priv.h" #include "sof-audio.h" -static void update_mute_led(struct snd_sof_control *scontrol, - struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - int temp = 0; - int mask; - int i; - - mask = 1U << snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); - - for (i = 0; i < scontrol->num_channels; i++) { - if (ucontrol->value.integer.value[i]) { - temp |= mask; - break; - } - } - - if (temp == scontrol->led_ctl.led_value) - return; - - scontrol->led_ctl.led_value = temp; - -#if IS_REACHABLE(CONFIG_LEDS_TRIGGER_AUDIO) - if (!scontrol->led_ctl.direction) - ledtrig_audio_set(LED_AUDIO_MUTE, temp ? LED_OFF : LED_ON); - else - ledtrig_audio_set(LED_AUDIO_MICMUTE, temp ? LED_OFF : LED_ON); -#endif -} - int snd_sof_volume_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -121,9 +91,6 @@ int snd_sof_switch_put(struct snd_kcontrol *kcontrol, struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp); const struct sof_ipc_tplg_ops *tplg_ops = sdev->ipc->ops->tplg; - if (scontrol->led_ctl.use_led) - update_mute_led(scontrol, kcontrol, ucontrol); - if (tplg_ops->control->switch_put) return tplg_ops->control->switch_put(scontrol, ucontrol); diff --git a/sound/soc/sof/topology.c b/sound/soc/sof/topology.c index 9b11e9795a7a..267a781494da 100644 --- a/sound/soc/sof/topology.c +++ b/sound/soc/sof/topology.c @@ -773,6 +773,7 @@ static int sof_control_load_volume(struct snd_soc_component *scomp, struct snd_soc_tplg_mixer_control *mc = container_of(hdr, struct snd_soc_tplg_mixer_control, hdr); int tlv[TLV_ITEMS]; + unsigned int mask; int ret; /* validate topology data */ @@ -821,6 +822,15 @@ static int sof_control_load_volume(struct snd_soc_component *scomp, goto err; } + if (scontrol->led_ctl.use_led) { + mask = scontrol->led_ctl.direction ? SNDRV_CTL_ELEM_ACCESS_MIC_LED : + SNDRV_CTL_ELEM_ACCESS_SPK_LED; + scontrol->access &= ~SNDRV_CTL_ELEM_ACCESS_LED_MASK; + scontrol->access |= mask; + kc->access &= ~SNDRV_CTL_ELEM_ACCESS_LED_MASK; + kc->access |= mask; + } + dev_dbg(scomp->dev, "tplg: load kcontrol index %d chans %d\n", scontrol->comp_id, scontrol->num_channels); -- 2.34.1

2 2

[PATCH 0/6] ASRC support on Tegra186 and later
by Sameer Pujar 29 Mar '22

29 Mar '22

This series adds support for Asynchronous Sample Rate Converter (ASRC) module on Tegra186 and later generations of SoCs. ASRC is a client of AHUB. The driver and DT support is added to make it work with Tegra audio graph card. The module can be plugged into audio path using ALSA mixer controls. ASRC supports two modes of operation, where it gets the ratio info from SW and ratio detector module. Presently the support is added for SW mode. Sameer Pujar (6): ASoC: tegra: Add binding doc for ASRC module ASoC: tegra: Add Tegra186 based ASRC driver ASoC: tegra: AHUB routes for ASRC module arm64: defconfig: Build Tegra ASRC module arm64: tegra: Add ASRC device on Tegra186 and later arm64: tegra: Enable ASRC on various platforms .../bindings/sound/nvidia,tegra186-asrc.yaml | 81 ++ .../bindings/sound/nvidia,tegra210-ahub.yaml | 4 + arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 223 +++++ arch/arm64/boot/dts/nvidia/tegra186.dtsi | 7 + arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 223 +++++ .../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 223 +++++ arch/arm64/boot/dts/nvidia/tegra194.dtsi | 8 + .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 223 +++++ arch/arm64/boot/dts/nvidia/tegra234.dtsi | 8 + arch/arm64/configs/defconfig | 1 + sound/soc/tegra/Kconfig | 12 + sound/soc/tegra/Makefile | 2 + sound/soc/tegra/tegra186_asrc.c | 1045 ++++++++++++++++++++ sound/soc/tegra/tegra186_asrc.h | 113 +++ sound/soc/tegra/tegra210_ahub.c | 82 +- 15 files changed, 2254 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml create mode 100644 sound/soc/tegra/tegra186_asrc.c create mode 100644 sound/soc/tegra/tegra186_asrc.h -- 2.7.4

2 9

[PATCH] ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
by Kai-Heng Feng 29 Mar '22

29 Mar '22

Commit 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue") is to solve recording issue met on AL236, by matching codec variant ALC269_TYPE_ALC257 and ALC269_TYPE_ALC256. This match can be too broad and Mi Notebook Pro 2020 is broken by the patch. Instead, use codec ID to be narrow down the scope, in order to make ALC256 unaffected. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215484 Fixes: 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue") Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4c33cb57963db..0d5e6cfa44888 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3617,8 +3617,8 @@ static void alc256_shutup(struct hda_codec *codec) /* If disable 3k pulldown control for alc257, the Mic detection will not work correctly * when booting with headset plugged. So skip setting it for the codec alc257 */ - if (spec->codec_variant != ALC269_TYPE_ALC257 && - spec->codec_variant != ALC269_TYPE_ALC256) + if (codec->core.vendor_id != 0x10ec0236 || + codec->core.vendor_id != 0x10ec0257) alc_update_coef_idx(codec, 0x46, 0, 3 << 12); if (!spec->no_shutup_pins) -- 2.34.1

3 2

USB-Audio: Add profile for MSI MPG X570S Carbon Max Wifi.
by GitHub pull_request - opened 29 Mar '22

29 Mar '22

alsa-project/alsa-ucm-conf pull request #143 was opened from lordhoto: This patch depends on Linux 5.17. This board features an Realtek ALC4080 chip. The various inputs and outputs are distributed over multiple hardware devices: * Input - hw:$card,0 loop back from speaker (called "Analog In") - hw:$card,1 line in at back panel - hw:$card,2 microphone from front AND back panel * Output - hw:$card,0 speaker output at back panel (up to 7.1) - hw:$card,1 headerphone output at front panel - hw:$card,2 could not figure this one out - hw:$card,3 guessed S/PDIF output (sadly no way to test) By default Mic and Line in are disabled. This confuses applications, thus I made the profile enable them by default. Without an UCM profile PulseAudio is not able to create output on the front panel nor record any microphone input. Signed-off-by: Johannes Schickel <lordhoto(a)gmail.com> Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/143 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/143.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[RFC PATCH v2 0/6] Flexible codec clock configuration
by Sameer Pujar 29 Mar '22

29 Mar '22

Typically the codec drivers require setting up of Sysclk. Sometimes presence of internal PLL can provide more options of Sysclk configuration. Presently ASoC provides callbacks set_sysclk() and set_pll() in such cases. However it comes with following limitations considering generic machine drivers (simple-card or audio-graph-card): 1. The Sysclk source needs to be passed to set_sysclk() callback. Presently simple-card or audio-graph-card card rely on default source value (which is 0). If any other source needs to be used, it is currently not possible. 2. The same would be true for codec PLL configuration as well, though simple-card or audio-graph-card don't have support yet for the PLL configuration. Earlier attempt[0] to address above was not felt suitable. The suggestion was to use standard clock based bindings instead. This RFC series takes RT5659 as a reference and exposes clock relationships via DT. **This is not in the final shape yet**, but I wanted to get some valuable feedback to understand if the idea is right. If this appears fine, this can be extended to other codecs (wherever necessary). This does not completely remove the need of set_sysclk() callback because the clock requirement (MCLK * fs) would come from the machine driver. But machine driver need not worry about Sysclk source. It would be internally managed by Codec via DT clock relationships. [0] https://patchwork.kernel.org/project/alsa-devel/list/?series=438531&archive… Changelog: ========== v1 -> v2: --------- * New patch added to convert rt5659 binding doc to YAML format * New patch added to document audio-graph-port binding for rt5659 * New patch added to document clock binding enhancement for rt5659 Sameer Pujar (6): ASoC: dt-bindings: Convert rt5659 bindings to YAML schema ASoC: dt-bindings: Add audio-graph-port bindings to rt5659 ASoC: dt-bindings: Extend clock bindings of rt5659 ASoC: soc-pcm: tweak DPCM BE hw_param() call order ASoC: rt5659: Expose internal clock relationships ASoC: tegra: Get clock rate in consumer mode .../devicetree/bindings/sound/realtek,rt5659.yaml | 179 +++++++++++++++ Documentation/devicetree/bindings/sound/rt5659.txt | 89 -------- sound/soc/codecs/rt5659.c | 248 ++++++++++++++++++++- sound/soc/codecs/rt5659.h | 9 + sound/soc/soc-pcm.c | 60 ++++- sound/soc/tegra/tegra210_i2s.c | 25 ++- 6 files changed, 503 insertions(+), 107 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5659.yaml delete mode 100644 Documentation/devicetree/bindings/sound/rt5659.txt -- 2.7.4

5 21

[PATCH] mediatek: mt8195: fix a missing check on list iterator
by Xiaomeng Tong 29 Mar '22

29 Mar '22

The bug is here: mt8195_etdm_hw_params_fixup(runtime, params); For the for_each_card_rtds(), just like list_for_each_entry(), the list iterator 'runtime' will point to a bogus position containing HEAD if the list is empty or no element is found. This case must be checked before any use of the iterator, otherwise it will lead to a invalid memory access. To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'runtime' as a dedicated pointer to point to the found element. Cc: stable(a)vger.kernel.org Fixes: 3d00d2c07f04f ("ASoC: mediatek: mt8195: add sof support on mt8195-mt6359-rt1019-rt5682") Signed-off-by: Xiaomeng Tong <xiam0nd.tong(a)gmail.com> --- .../mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c index 29c2d3407cc7..dc91877e4c3c 100644 --- a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c +++ b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c @@ -814,7 +814,7 @@ static int mt8195_dai_link_fixup(struct snd_soc_pcm_runtime *rtd, { struct snd_soc_card *card = rtd->card; struct snd_soc_dai_link *sof_dai_link = NULL; - struct snd_soc_pcm_runtime *runtime; + struct snd_soc_pcm_runtime *runtime = NULL, *iter; struct snd_soc_dai *cpu_dai; int i, j, ret = 0; @@ -824,16 +824,17 @@ static int mt8195_dai_link_fixup(struct snd_soc_pcm_runtime *rtd, if (strcmp(rtd->dai_link->name, conn->normal_link)) continue; - for_each_card_rtds(card, runtime) { - if (strcmp(runtime->dai_link->name, conn->sof_link)) + for_each_card_rtds(card, iter) { + if (strcmp(iter->dai_link->name, conn->sof_link)) continue; - for_each_rtd_cpu_dais(runtime, j, cpu_dai) { + for_each_rtd_cpu_dais(iter, j, cpu_dai) { if (cpu_dai->stream_active[conn->stream_dir] > 0) { - sof_dai_link = runtime->dai_link; + sof_dai_link = iter->dai_link; break; } } + runtime = iter; break; } @@ -845,7 +846,8 @@ static int mt8195_dai_link_fixup(struct snd_soc_pcm_runtime *rtd, if (!strcmp(rtd->dai_link->name, "ETDM2_IN_BE") || !strcmp(rtd->dai_link->name, "ETDM1_OUT_BE")) { - mt8195_etdm_hw_params_fixup(runtime, params); + if (runtime) + mt8195_etdm_hw_params_fixup(runtime, params); } return ret; -- 2.17.1

2 1

[PATCH] soc: soc-dapm: fix two incorrect uses of list iterator
by Xiaomeng Tong 29 Mar '22

29 Mar '22

These two bug are here: list_for_each_entry_safe_continue(w, n, list, power_list); list_for_each_entry_safe_continue(w, n, list, power_list); After the list_for_each_entry_safe_continue() exits, the list iterator will always be a bogus pointer which point to an invalid struct objdect containing HEAD member. The funciton poniter 'w->event' will be a invalid value which can lead to a control-flow hijack if the 'w' can be controlled. The original intention was to break the outer list_for_each_entry_safe() loop if w->event is NULL, but forgot to *break* switch statement first. So just add a break to fix the bug. Cc: stable(a)vger.kernel.org Fixes: 163cac061c973 ("ASoC: Factor out DAPM sequence execution") Signed-off-by: Xiaomeng Tong <xiam0nd.tong(a)gmail.com> --- sound/soc/soc-dapm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index b06c5682445c..2a5a64d21856 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1686,9 +1686,11 @@ static void dapm_seq_run(struct snd_soc_card *card, switch (w->id) { case snd_soc_dapm_pre: - if (!w->event) + if (!w->event) { list_for_each_entry_safe_continue(w, n, list, power_list); + break; + } if (event == SND_SOC_DAPM_STREAM_START) ret = w->event(w, @@ -1699,9 +1701,11 @@ static void dapm_seq_run(struct snd_soc_card *card, break; case snd_soc_dapm_post: - if (!w->event) + if (!w->event) { list_for_each_entry_safe_continue(w, n, list, power_list); + break; + } if (event == SND_SOC_DAPM_STREAM_START) ret = w->event(w, -- 2.17.1

2 2

[PATCH 00/14] ASoC: Intel: avs: Topology and path management
by Cezary Rojewski 29 Mar '22

29 Mar '22

A continuation of avs-driver initial series [1]. This chapter covers path management and topology parsing part which was ealier path of the main series. The two patches that represented these two subjects in the initial series, have been split into many to allow for easier review and discussion. AVS topology is split into two major parts: dictionaries - found within ASoC topology manifest - and path templates. Dictionaries job is to reduce the total amount of memory occupied by topology elements. Rather than having every pipeline and module carry its own information, each refers to specific entry in specific dictionary by provided (from topology file) indexes. In consequence, most struct avs_tplg_xxx are made out of pointers. Path templates are similar to path descriptions found in skylake-driver and they describe how given path shall look like in runtime - number of modules and pipelines that shape it and how they are laid out. A single path template is tied either to FE or BE and thus at most to a single, user-visible endpoint when speaking of FE. Path is a software representation of its ADSP firmware equivalent. It's a logical container for pipelines which are themselves containers - this time for modules i.e. processing units. Depending on the number of audio formats supported, each path template may carry one or more descriptions of given path. During runtime, when audio format is known, description matching said format is selected and used when instantiating path on ADSP firmware side through IPCs. Changes RFC -> v1: - Plenty of rewordings and spelling fixes as requested by Pierre - any sysfs-functionality-related left in RFC dropped, will be part of separate subject in the future - separated parsing of formatted strings into: "Support link_mask formatted string" patch, increasing series size to 14 patches [1]: https://lore.kernel.org/alsa-devel/20220207122108.3780926-1-cezary.rojewski… Cezary Rojewski (14): ASoC: Intel: avs: Declare vendor tokens ASoC: Intel: avs: Add topology parsing infrastructure ASoC: Intel: avs: Parse module-extension tuples ASoC: Intel: avs: Parse pplcfg and binding tuples ASoC: Intel: avs: Parse pipeline and module tuples ASoC: Intel: avs: Parse path and path templates tuples ASoC: Intel: avs: Add topology loading operations ASoC: Intel: avs: Support link_mask formatted string ASoC: Intel: avs: Declare path and its components ASoC: Intel: avs: Path creation and freeing ASoC: Intel: avs: Path state management ASoC: Intel: avs: Arm paths after creating them ASoC: Intel: avs: Prepare modules before bindings them ASoC: Intel: avs: Configure modules according to their type include/uapi/sound/intel/avs/tokens.h | 126 ++ sound/soc/intel/Kconfig | 2 + sound/soc/intel/avs/Makefile | 3 +- sound/soc/intel/avs/avs.h | 23 + sound/soc/intel/avs/path.c | 1008 ++++++++++++++++ sound/soc/intel/avs/path.h | 72 ++ sound/soc/intel/avs/topology.c | 1600 +++++++++++++++++++++++++ sound/soc/intel/avs/topology.h | 194 +++ 8 files changed, 3027 insertions(+), 1 deletion(-) create mode 100644 include/uapi/sound/intel/avs/tokens.h create mode 100644 sound/soc/intel/avs/path.c create mode 100644 sound/soc/intel/avs/path.h create mode 100644 sound/soc/intel/avs/topology.c create mode 100644 sound/soc/intel/avs/topology.h -- 2.25.1

2 15

[PATCH] ALSA: hda: Avoid unsol event during RPM suspending
by Mohan Kumar 28 Mar '22

28 Mar '22

There is a corner case with unsol event handling during codec runtime suspending state. When the codec runtime suspend call initiated, the codec->in_pm atomic variable would be 0, currently the codec runtime suspend function calls snd_hdac_enter_pm() which will just increments the codec->in_pm atomic variable. Consider unsol event happened just after this step and before snd_hdac_leave_pm() in the codec runtime suspend function. The snd_hdac_power_up_pm() in the unsol event flow in hdmi_present_sense_via_verbs() function would just increment the codec->in_pm atomic variable without calling pm_runtime_get_sync function. As codec runtime suspend flow is already in progress and in parallel unsol event is also accessing the codec verbs, as soon as codec suspend flow completes and clocks are switched off before completing the unsol event handling as both functions doesn't wait for each other. This will result in below errors [ 589.428020] tegra-hda 3510000.hda: azx_get_response timeout, switching to polling mode: last cmd=0x505f2f57 [ 589.428344] tegra-hda 3510000.hda: spurious response 0x80000074:0x5, last cmd=0x505f2f57 [ 589.428547] tegra-hda 3510000.hda: spurious response 0x80000065:0x5, last cmd=0x505f2f57 To avoid this, the unsol event flow should not perform any codec verb related operations during RPM_SUSPENDING state. Signed-off-by: Mohan Kumar <mkumard(a)nvidia.com> --- sound/pci/hda/patch_hdmi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index c85ed7bc121e..67870c8d84a5 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1625,6 +1625,7 @@ static void hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin, struct hda_codec *codec = per_pin->codec; struct hdmi_spec *spec = codec->spec; struct hdmi_eld *eld = &spec->temp_eld; + struct device *dev = hda_codec_dev(codec); hda_nid_t pin_nid = per_pin->pin_nid; int dev_id = per_pin->dev_id; /* @@ -1639,7 +1640,8 @@ static void hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin, int ret; ret = snd_hda_power_up_pm(codec); - if (ret < 0 && pm_runtime_suspended(hda_codec_dev(codec))) + if ((ret < 0 && pm_runtime_suspended(dev)) || + (dev->power.runtime_status == RPM_SUSPENDING)) goto out; present = snd_hda_jack_pin_sense(codec, pin_nid, dev_id); -- 2.17.1

4 8

[PATCH 0/6] Add new HW variants and fix few minor issues
by Vitaly Rodionov 28 Mar '22

28 Mar '22

This series adds new HW variants for Dell's Dolphin and Warlock, and also fixies few very minor issues. Stefan Binding (5): ALSA: hda/cs8409: Fix Warlock to use mono mic configuration ALSA: hda/cs8409: Re-order quirk table into ascending order ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants ALSA: hda/cs8409: Support new Warlock MLK Variants ALSA: hda/cs8409: Disable HSBIAS_SENSE_EN for Cyborg Vitaly Rodionov (1): ALSA: hda/cs8409: Add new Dolphin HW variants sound/pci/hda/patch_cs8409-tables.c | 68 +++++++++++++++++++++-------- sound/pci/hda/patch_cs8409.c | 47 +++++++++++--------- sound/pci/hda/patch_cs8409.h | 5 +++ 3 files changed, 83 insertions(+), 37 deletions(-) -- 2.25.1

2 7

[V3 1/2] ASoC: max98390: Add reset gpio control
by Steve Lee 28 Mar '22

28 Mar '22

Add reset gpio control to support RESET PIN connected to gpio. Signed-off-by: Steve Lee <steve.lee.analog(a)gmail.com> --- sound/soc/codecs/max98390.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c index 40fd6f363f35..05df9b85d9b0 100644 --- a/sound/soc/codecs/max98390.c +++ b/sound/soc/codecs/max98390.c @@ -1022,6 +1022,7 @@ static int max98390_i2c_probe(struct i2c_client *i2c, struct max98390_priv *max98390 = NULL; struct i2c_adapter *adapter = i2c->adapter; + struct gpio_desc *reset_gpio; ret = i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE @@ -1073,6 +1074,17 @@ static int max98390_i2c_probe(struct i2c_client *i2c, return ret; } + reset_gpio = devm_gpiod_get_optional(&i2c->dev, + "reset", GPIOD_OUT_LOW); + + /* Power on device */ + if (reset_gpio) { + usleep_range(1000, 2000); + /* bring out of reset */ + gpiod_set_value_cansleep(reset_gpio, 1); + usleep_range(1000, 2000); + } + /* Check Revision ID */ ret = regmap_read(max98390->regmap, MAX98390_R24FF_REV_ID, &reg); -- 2.17.1

3 5

Bug 215711 - snd_hda_intel not binding to codec
by Thorsten Leemhuis 28 Mar '22

28 Mar '22

Hi, this is your Linux kernel regression tracker. I noticed a regression report in bugzilla.kernel.org that afaics nobody acted upon since it was reported about a week ago, that's why I decided to forward it to the lists and the maintainers. To quote from https://bugzilla.kernel.org/show_bug.cgi?id=215711: > Created attachment 300588 [details] > SND_HDA_* excrept from kernel config > > On PCI device discovery the Intel HDA codec doesn't bind to appropriate codec (if that is the correct term). The device codec (Conexant) is loaded, but sound doesn't work. Reloading the main module (snd_hda_intel) fixes the issue: > > $ echo 1 > /sys/bus/pci/devices/0000:00:1b.0/remove > > $ lsmod | sort > Module Size Used by > configs 45056 0 > e1000e 225280 0 > grace 16384 1 lockd > irqbypass 16384 1 kvm > iwlwifi 274432 0 > kvm 569344 1 kvm_intel > kvm_intel 229376 0 > lockd 98304 1 nfs > mei 90112 1 mei_me > mei_me 28672 0 > nfs 184320 3 nfsv4 > nfsv4 380928 2 > sunrpc 274432 9 nfsv4,lockd,nfs > uvcvideo 110592 0 > videobuf2_common 45056 4 videobuf2_vmalloc,videobuf2_v4l2,uvcvideo,videobuf2_memops > videobuf2_memops 16384 1 videobuf2_vmalloc > videobuf2_v4l2 24576 1 uvcvideo > videobuf2_vmalloc 16384 1 uvcvideo > > $ echo 1 > /sys/bus/pci/rescan > # dmesg output > [ 9218.563134] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 > [ 9218.563178] pci 0000:00:1b.0: reg 0x10: [mem 0xc0004000-0xc0007fff 64bit] > [ 9218.563344] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 9218.563818] pci 0000:00:1b.0: BAR 0: assigned [mem 0xc0004000-0xc0007fff 64bit] > [ 9218.563846] pci 0000:00:1e.0: PCI bridge to [bus 0e] > [ 9218.598927] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff824a44e0) > [ 9218.609798] snd_hda_intel 0000:00:1b.0: Cannot probe codecs, giving up > > $ lsmod | sort > Module Size Used by > configs 45056 0 > e1000e 225280 0 > grace 16384 1 lockd > irqbypass 16384 1 kvm > iwlwifi 274432 0 > kvm 569344 1 kvm_intel > kvm_intel 229376 0 > lockd 98304 1 nfs > mei 90112 1 mei_me > mei_me 28672 0 > nfs 184320 3 nfsv4 > nfsv4 380928 2 > snd 77824 7 snd_hda_codec_generic,snd_hda_codec_conexant,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_timer,snd_pcm > snd_hda_codec 118784 3 snd_hda_codec_generic,snd_hda_codec_conexant,snd_hda_intel > snd_hda_codec_conexant 20480 0 > snd_hda_codec_generic 77824 1 snd_hda_codec_conexant > snd_hda_core 65536 4 snd_hda_codec_generic,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec > snd_hda_intel 36864 0 > snd_hwdep 16384 1 snd_hda_codec > snd_intel_dspcfg 16384 1 snd_hda_intel > snd_pcm 110592 3 snd_hda_intel,snd_hda_codec,snd_hda_core > snd_timer 32768 1 snd_pcm > soundcore 16384 1 snd > sunrpc 274432 9 nfsv4,lockd,nfs > uvcvideo 110592 0 > videobuf2_common 45056 4 videobuf2_vmalloc,videobuf2_v4l2,uvcvideo,videobuf2_memops > videobuf2_memops 16384 1 videobuf2_vmalloc > videobuf2_v4l2 24576 1 uvcvideo > videobuf2_vmalloc 16384 1 uvcvideo > > $ modprobe -rv snd_hda_intel; modprobe -v snd_hda_intel > # dmesg output > [ 9230.886362] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff824a44e0) > [ 9230.895721] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing. > [ 9230.896677] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker > [ 9230.896691] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > [ 9230.896700] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) > [ 9230.896707] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 > [ 9230.896713] snd_hda_codec_conexant hdaudioC0D0: inputs: > [ 9230.896718] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 > [ 9230.896724] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b > [ 9230.896729] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a > [ 9230.908437] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line > [ 9230.908454] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > [ 9230.908461] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) > [ 9230.908468] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0 > [ 9230.908473] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x0 > [ 9230.908477] snd_hda_codec_generic hdaudioC0D3: inputs: > [ 9230.916063] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input52 > [ 9230.916216] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input53 > [ 9230.916353] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input54 > [ 9230.919563] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input55 > [ 9230.919727] input: HDA Intel MID HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input56 > > $ lsmod | sort > Module Size Used by > configs 45056 0 > e1000e 225280 0 > grace 16384 1 lockd > irqbypass 16384 1 kvm > iwlwifi 274432 0 > kvm 569344 1 kvm_intel > kvm_intel 229376 0 > lockd 98304 1 nfs > mei 90112 1 mei_me > mei_me 28672 0 > nfs 184320 3 nfsv4 > nfsv4 380928 2 > snd 77824 7 snd_hda_codec_generic,snd_hda_codec_conexant,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_timer,snd_pcm > snd_hda_codec 118784 3 snd_hda_codec_generic,snd_hda_codec_conexant,snd_hda_intel > snd_hda_codec_conexant 20480 1 > snd_hda_codec_generic 77824 2 snd_hda_codec_conexant > snd_hda_core 65536 4 snd_hda_codec_generic,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec > snd_hda_intel 36864 0 > snd_hwdep 16384 1 snd_hda_codec > snd_intel_dspcfg 16384 1 snd_hda_intel > snd_pcm 110592 3 snd_hda_intel,snd_hda_codec,snd_hda_core > snd_timer 32768 1 snd_pcm > soundcore 16384 1 snd > sunrpc 274432 9 nfsv4,lockd,nfs > uvcvideo 110592 0 > videobuf2_common 45056 4 videobuf2_vmalloc,videobuf2_v4l2,uvcvideo,videobuf2_memops > videobuf2_memops 16384 1 videobuf2_vmalloc > videobuf2_v4l2 24576 1 uvcvideo > videobuf2_vmalloc 16384 1 uvcvideo > > > 5.15.29, have observed it already at least on 5.10.27, HW is ThinkPad x201 (x220 as well). I'm marking it as regression, since it used to work in the distant past (5.4-ish at least iirc) Could somebody take a look into this? Or was this discussed somewhere else already? Or even fixed? Anyway, to get this tracked: #regzbot introduced: v5.4..v5.10 #regzbot from: Petr Cerny <bugzilla(a)black-net.org> #regzbot title: snd: snd_hda_intel not binding to codec #regzbot link: https://bugzilla.kernel.org/show_bug.cgi?id=215711 Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) P.S.: As the Linux kernel's regression tracker I'm getting a lot of reports on my table. I can only look briefly into most of them and lack knowledge about most of the areas they concern. I thus unfortunately will sometimes get things wrong or miss something important. I hope that's not the case here; if you think it is, don't hesitate to tell me in a public reply, it's in everyone's interest to set the public record straight. -- Additional information about regzbot: If you want to know more about regzbot, check out its web-interface, the getting start guide, and the references documentation: https://linux-regtracking.leemhuis.info/regzbot/ https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md The last two documents will explain how you can interact with regzbot yourself if your want to. Hint for reporters: when reporting a regression it's in your interest to CC the regression list and tell regzbot about the issue, as that ensures the regression makes it onto the radar of the Linux kernel's regression tracker -- that's in your interest, as it ensures your report won't fall through the cracks unnoticed. Hint for developers: you normally don't need to care about regzbot once it's involved. Fix the issue as you normally would, just remember to include 'Link:' tag in the patch descriptions pointing to all reports about the issue. This has been expected from developers even before regzbot showed up for reasons explained in 'Documentation/process/submitting-patches.rst' and 'Documentation/process/5.Posting.rst'.

1 0

[PATCH v2 1/2] ASoC: cs35l41: Add one more variable in the debug log
by Hui Wang 28 Mar '22

28 Mar '22

otp_map[].size is a key variable to compute the value of otp_val and to update the bit_offset, it is helpful to debug if could put it in the debug log. Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/soc/codecs/cs35l41-lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs35l41-lib.c b/sound/soc/codecs/cs35l41-lib.c index e5a56bcbb223..d0a480c40231 100644 --- a/sound/soc/codecs/cs35l41-lib.c +++ b/sound/soc/codecs/cs35l41-lib.c @@ -822,8 +822,8 @@ int cs35l41_otp_unpack(struct device *dev, struct regmap *regmap) word_offset = otp_map_match->word_offset; for (i = 0; i < otp_map_match->num_elements; i++) { - dev_dbg(dev, "bitoffset= %d, word_offset=%d, bit_sum mod 32=%d\n", - bit_offset, word_offset, bit_sum % 32); + dev_dbg(dev, "bitoffset= %d, word_offset=%d, bit_sum mod 32=%d otp_map[i].size = %d\n", + bit_offset, word_offset, bit_sum % 32, otp_map[i].size); if (bit_offset + otp_map[i].size - 1 >= 32) { otp_val = (otp_mem[word_offset] & GENMASK(31, bit_offset)) >> bit_offset; -- 2.25.1

3 5

[PATCH v1 0/3] Exynos Usb Audio Offloading Support
by Oh Eomji 28 Mar '22

28 Mar '22

Exynos uses the usb audio offloading functions to save power consumption in the usb audio device. The audio control interface is processed in the existing usb path, and the audio stream interface is processed in the audio path. Through communication between AP usb and audio usb f/w, usb audio device connection information, xhci memory information, etc. are notified to usb audio f/w so that the abox directly controls xhci transmission. Vendor's hooking interface is required for this functions. Throught this interface, information such as usb audio device connection information, pcm interface information, sample rate setting, xhci memory, full descriptor of connected device, and setting point can be transmitted to usb audio f/w. the usb audio f/w can set up and interface, transmit audio data, etc. through the received information. This patchset includes the following for using usb audio offloading: - vendor's hooking interface - vendor's hooking interface calling point - user using vendor's hooking interface Oh Eomji (3): sound: usb: Add vendor's hooking interface sound: usb: Calling vendor's call-back function within usb audio operation. sound: usb: Exynos usb audio offloading driver sound/usb/Kconfig | 9 + sound/usb/Makefile | 2 + sound/usb/card.c | 119 +++++++++ sound/usb/card.h | 20 ++ sound/usb/exynos_usb_audio.c | 560 +++++++++++++++++++++++++++++++++++++++++++ sound/usb/exynos_usb_audio.h | 150 ++++++++++++ sound/usb/pcm.c | 37 +++ sound/usb/stream.c | 2 + sound/usb/usbaudio.h | 45 ++++ 9 files changed, 944 insertions(+) create mode 100644 sound/usb/exynos_usb_audio.c create mode 100644 sound/usb/exynos_usb_audio.h -- 2.7.4

4 16

[PATCH] soc: soc-core: fix a missing check on list iterator
by Xiaomeng Tong 28 Mar '22

28 Mar '22

The bug is here: *dai_name = dai->driver->name; For for_each_component_dais, just like list_for_each_entry, the list iterator 'dai' will point to a bogus position containing HEAD if the list is empty or no element is found. This case must be checked before any use of the iterator, otherwise it will lead to a invalid memory access. To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'dai' as a dedicated pointer to point to the found element. Cc: stable(a)vger.kernel.org Fixes: 58bf4179000a3 ("ASoC: soc-core: remove dai_drv from snd_soc_component") Signed-off-by: Xiaomeng Tong <xiam0nd.tong(a)gmail.com> --- sound/soc/soc-core.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 434e61b46983..064fc0347868 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3238,7 +3238,7 @@ int snd_soc_get_dai_name(const struct of_phandle_args *args, ret = snd_soc_component_of_xlate_dai_name(pos, args, dai_name); if (ret == -ENOTSUPP) { - struct snd_soc_dai *dai; + struct snd_soc_dai *dai = NULL, *iter; int id = -1; switch (args->args_count) { @@ -3261,12 +3261,19 @@ int snd_soc_get_dai_name(const struct of_phandle_args *args, ret = 0; /* find target DAI */ - for_each_component_dais(pos, dai) { - if (id == 0) + for_each_component_dais(pos, iter) { + if (id == 0) { + dai = iter; break; + } id--; } + if (!dai) { + ret = -EINVAL; + continue; + } + *dai_name = dai->driver->name; if (!*dai_name) *dai_name = pos->name; -- 2.17.1

2 1

Audio only working after stopping PulseAudio and setting the UCM - kblda7219max on the ChromeOS Kernel, 5.10.70
by GitHub issues - edited 28 Mar '22

28 Mar '22

alsa-project/alsa-ucm-conf issue #142 was edited from MilkyDeveloper: On my `kblda7219max` Chromebook (baseboard: NAMI), internal audio works properly when the following conditions are met: * Kernel 5.10.70 (ChromeOS fork) is used (the latest ChromeOS kernel has some kind of topology-related kernel bug) * FW is copied from the ChromeOS rootfs to Linux * UCM is converted to UCM2 * Only ALSA is used However, whenever I start PulseAudio (`pulseaudio -vvvv`), audio is disabled, going to a dummy output. PulseAudio passes through probing for the UCM files but errors out in this particular spot: ``` I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed: Invalid argument D: [pulseaudio] alsa-util.c: Trying hw:kblda7219max,0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open hw:kblda7219max,0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 21845 ms I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) ``` which causes it to say: ``` E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="platform-kbl_da7219_mx98357a" card_name="alsa_card.platform-kbl_da7219_mx98357a" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. ``` My `dmesg` gets filled with: ``` Kbl Audio Port: ASoC: no backend DAIs enabled for Kbl Audio Port Kbl Audio Port: ASoC: dpcm_fe_dai_prepare() failed (-22) ``` However, once I kill PulseAudio and run `alsaucm -c kblda7219max set _verb HiFi set _enadev Speaker`, audio begins working again (but this is in pure ALSA and PA apps are not compatible) and the `no backend DAIs enabled for Kbl Audio Port` is no longer logged to `dmesg`. I think this is a UCM issue because the audio is working fine kernel-level and with ALSA, but PulseAudio seems to mess something up with the UCM and the UCM needs to be set again. Huge thanks for any help! [alsa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8355612/… (My PulseAudio log is slightly different from the time I ran PulseAudio and got the PCM_IOCTL_PREPARE error) [pulseaudio-log.txt](https://github.com/alsa-project/alsa-ucm-conf/files/835… [HiFi.conf.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8355631/… [kblda7219max.conf.txt](https://github.com/alsa-project/alsa-ucm-conf/files/… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/142 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] soc: meson: fix a missing check on list iterator
by Xiaomeng Tong 27 Mar '22

27 Mar '22

The bug is here: *dai_name = dai->driver->name; For for_each_component_dais(), just like list_for_each_entry, the list iterator 'runtime' will point to a bogus position containing HEAD if the list is empty or no element is found. This case must be checked before any use of the iterator, otherwise it will lead to a invalid memory access. To fix the bug, just move the assignment into loop and return 0 when element is found, otherwise return -EINVAL; Cc: stable(a)vger.kernel.org Fixes: 6ae9ca9ce986b ("ASoC: meson: aiu: add i2s and spdif support") Signed-off-by: Xiaomeng Tong <xiam0nd.tong(a)gmail.com> --- sound/soc/meson/aiu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/meson/aiu.c b/sound/soc/meson/aiu.c index d299a70db7e5..b52915c6f53b 100644 --- a/sound/soc/meson/aiu.c +++ b/sound/soc/meson/aiu.c @@ -61,14 +61,14 @@ int aiu_of_xlate_dai_name(struct snd_soc_component *component, return -EINVAL; for_each_component_dais(component, dai) { - if (id == 0) - break; + if (id == 0) { + *dai_name = dai->driver->name; + return 0; + } id--; } - *dai_name = dai->driver->name; - - return 0; + return -EINVAL; } static int aiu_cpu_of_xlate_dai_name(struct snd_soc_component *component, -- 2.17.1

2 3

[PATCH] cs423x: cs4236: fix an incorrect NULL check on list iterator
by Xiaomeng Tong 27 Mar '22

27 Mar '22

The bug is here: err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev); The list iterator value 'cdev' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'cdev' as a dedicated pointer to point to the found element. And snd_card_cs423x_pnp() itself has NULL check for cdev. Cc: stable(a)vger.kernel.org Fixes: c2b73d1458014 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection") Signed-off-by: Xiaomeng Tong <xiam0nd.tong(a)gmail.com> --- sound/isa/cs423x/cs4236.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index b6bdebd9ef27..10112e1bb25d 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -494,7 +494,7 @@ static int snd_cs423x_pnpbios_detect(struct pnp_dev *pdev, static int dev; int err; struct snd_card *card; - struct pnp_dev *cdev; + struct pnp_dev *cdev, *iter; char cid[PNP_ID_LEN]; if (pnp_device_is_isapnp(pdev)) @@ -510,9 +510,11 @@ static int snd_cs423x_pnpbios_detect(struct pnp_dev *pdev, strcpy(cid, pdev->id[0].id); cid[5] = '1'; cdev = NULL; - list_for_each_entry(cdev, &(pdev->protocol->devices), protocol_list) { - if (!strcmp(cdev->id[0].id, cid)) + list_for_each_entry(iter, &(pdev->protocol->devices), protocol_list) { + if (!strcmp(iter->id[0].id, cid)) { + cdev = iter; break; + } } err = snd_cs423x_card_new(&pdev->dev, dev, &card); if (err < 0) -- 2.17.1

2 1

[PATCH] ALSA: hda/realtek: Enable headset mic on Lenovo P360
by Kai-Heng Feng 27 Mar '22

27 Mar '22

Lenovo P360 is another platform equipped with ALC897, and it needs ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e88fbef57c40c..4c33cb57963db 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11152,6 +11152,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x14cd, 0x5003, "USI", ALC662_FIXUP_USI_HEADSET_MODE), SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC662_FIXUP_LENOVO_MULTI_CODECS), + SND_PCI_QUIRK(0x17aa, 0x1057, "Lenovo P360", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x32ca, "Lenovo ThinkCentre M80", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x32cb, "Lenovo ThinkCentre M70", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x32cf, "Lenovo ThinkCentre M950", ALC897_FIXUP_HEADSET_MIC_PIN), -- 2.34.1

2 1

PulseAudio only working after setting the UCM - kblda7219max on the ChromeOS Kernel, 5.10.70
by GitHub issues - opened 26 Mar '22

26 Mar '22

alsa-project/alsa-ucm-conf issue #142 was opened from MilkyDeveloper: On my `kblda7219max` Chromebook (baseboard: NAMI), internal audio works properly when the following conditions are met: * Kernel 5.10.70 (ChromeOS fork) is used (the latest ChromeOS kernel has some kind of topology-related kernel bug) * FW is copied from the ChromeOS rootfs to Linux * UCM is converted to UCM2 * Only ALSA is used However, whenever I start PulseAudio (`pulseaudio -vvvv`), audio is disabled, going to a dummy output. PulseAudio passes through probing for the UCM files but errors out in this particular spot: ``` I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) I: [pulseaudio] alsa-util.c: snd_pcm_hw_params failed: Invalid argument D: [pulseaudio] alsa-util.c: Trying hw:kblda7219max,0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open hw:kblda7219max,0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 21845 ms I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) I: [pulseaudio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-22) ``` which causes it to say: ``` E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="platform-kbl_da7219_mx98357a" card_name="alsa_card.platform-kbl_da7219_mx98357a" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. ``` My `dmesg` gets filled with: ``` Kbl Audio Port: ASoC: no backend DAIs enabled for Kbl Audio Port Kbl Audio Port: ASoC: dpcm_fe_dai_prepare() failed (-22) ``` However, once I kill PulseAudio and run `alsaucm -c kblda7219max set _verb HiFi set _enadev Speaker`, audio begins working again (but this is in pure ALSA and PA apps are not compatible) and the `no backend DAIs enabled for Kbl Audio Port` is no longer logged to `dmesg`. I think this is a UCM issue because the audio is working fine kernel-level and with ALSA, but PulseAudio seems to mess something up with the UCM and the UCM needs to be set again. Huge thanks for any help! [alsa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8355612/… (My PulseAudio log is slightly different from the time I ran PulseAudio and got the PCM_IOCTL_PREPARE error) [pulseaudio-log.txt](https://github.com/alsa-project/alsa-ucm-conf/files/835… [HiFi.conf.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8355631/… [kblda7219max.conf.txt](https://github.com/alsa-project/alsa-ucm-conf/files/… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/142 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Conceptual bug on SoundWire probe/remove?
by Pierre-Louis Bossart 26 Mar '22

26 Mar '22

Hi, I could use feedback/guidance on a possible conceptual bug in the SoundWire probe and bus handling. When we probe a driver, the code does this: static int sdw_drv_probe(struct device *dev) { struct sdw_slave *slave = dev_to_sdw_dev(dev); struct sdw_driver *drv = drv_to_sdw_driver(dev->driver); const struct sdw_device_id *id; const char *name; int ret; /* * fw description is mandatory to bind */ if (!dev->fwnode) return -ENODEV; if (!IS_ENABLED(CONFIG_ACPI) && !dev->of_node) return -ENODEV; id = sdw_get_device_id(slave, drv); if (!id) return -ENODEV; slave->ops = drv->ops; The last line is the problematic one. If at some point, the user does an rmmod and unbinds the SoundWire codec driver, the .remove will be called and the 'drv' will no longer be valid, but we will still have a reference to drv->ops and use that pointer in the bus code, e.g. /* Update the Slave driver */ if (slave_notify && slave->ops && slave->ops->interrupt_callback) { slave_intr.sdca_cascade = sdca_cascade; slave_intr.control_port = clear; memcpy(slave_intr.port, &port_status, sizeof(slave_intr.port)); slave->ops->interrupt_callback(slave, &slave_intr); } I noodled with a potential fix in https://github.com/thesofproject/linux/pull/3534/commits/82d64fb0fd39b53226… where I force-reset this slave->ops pointer, but it is likely to be very racy. We probably need to avoid such references, or have a clean mechanism to unbind, e.g. with all commands and interrupts stopped while the codec driver .remove routine is handled. Initial error reports at https://github.com/thesofproject/linux/issues/3531 Suggestions and comments welcome, thanks! -Pierre

5 8

[PATCH] ASoC: codecs: add support for ES8326 dts
by zhuning＠everest-semi.com 26 Mar '22

26 Mar '22

From: yangxiaohua <yangxiaohua(a)everest-semi.com> Subject: [PATCH 1/1] ASoC: codecs: add support for ES8326 dts The ES8326 codec is not compatible with ES8316 and requires a dedicated driver. This is a separate patch for ES8326 dts Signed-off-by: David Yang <yangxiaohua(a)everest-semi.com> --- .../bindings/sound/everest,es8326.yaml | 109 ++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100755 Documentation/devicetree/bindings/sound/everest,es8326.yaml diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml new file mode 100755 index 000000000000..8cae9c328dbc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/everest,es8326.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Everest ES8326 audio CODEC + +maintainers: + - David Yang <yangxiaohua(a)everest-semi.com> + +properties: + compatible: + const: everest,es8326 + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for master clock (MCLK) + + clock-names: + items: + - const: mclk + + "#sound-dai-cells": + const: 0 + + mclk-rate: + description: + clock rate of mclk + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + + everest,jack-pol: + description: + just the value of reg 57. Bit(3) decides whether the jack polarity is inverted. + Bit(2) decides whether the bottom on the headset is inverted. + Bit(1)/(0) decides the mic properity to be OMTP/CTIA or auto. + $ref: /schemas/types.yaml#/definitions/uint8-array + minimum: 0 + maximum: 0x0f + default: 0x0f + + everest,mic1-src: + description: + the value of reg 2A when headset plugged. + $ref: /schemas/types.yaml#/definitions/uint8-array + minimum: 0x00 + maximum: 0x77 + default: 0x22 + + everest,mic2-src: + description: + the value of reg 2A when headset unplugged. + $ref: /schemas/types.yaml#/definitions/uint8-array + minimum: 0x00 + maximum: 0x77 + default: 0x44 + + everest,amic1-src: + description: + the value of reg 23 when headset plugged. + $ref: /schemas/types.yaml#/definitions/uint8-array + minimum: 0x19 + maximum: 0x29 + default: 0x19 + + everest,amic2-src: + description: + the value of reg 23 when headset unplugged. + Set to 0x19 if dmic used. Set to 0x29 if amic used. + $ref: /schemas/types.yaml#/definitions/uint8-array + minimum: 0x19 + maximum: 0x29 + default: 0x19 + + everest,jack-detect-inverted: + description: + Defined to invert the jack detection. + $ref: /schemas/types.yaml#/definitions/flag + +required: + - compatible + - reg + - "#sound-dai-cells" + + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + es8326: codec@19 { + compatible = "everest,es8326"; + reg = <0x19>; + clocks = <&clks 10>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + mic1-src = [22]; + mic2-src = [44]; + amic1-src = [19]; + amic2-src = [19]; + jack-pol = [0e]; + }; + }; -- 2.17.1

1 0

Add UCM for PinePhone
by GitHub pull_request - edited 26 Mar '22

26 Mar '22

alsa-project/alsa-ucm-conf pull request #134 was edited from tomfitzhenry: Fixes https://github.com/alsa-project/alsa-ucm-conf/issues/124. This PR adds support for the https://wiki.pine64.org/index.php/PinePhone This PR contains: * This UCM config copied from https://gitlab.com/pine64-org/pine64-alsa-ucm/, which was developed by many developers ( https://gitlab.com/pine64-org/pine64-alsa-ucm/-/merge_requests/1 ) and is BSD-3-Clause licensed. * Fix paths to be relative to alsa-ucm-conf root. * Some refactoring of the UCM config, incl. removing duplicate directives, and moving volume directives to BootSequence. * Updating the routing/playback/boost volumes, in response to comments on this PR. I have tested: * HiFi * Record audio via the headset. * Record audio via the internal mic. * Play audio on the headphones. * Play audio on the speaker. * Play audio on the internal speaker. * Voice Call * Speak on the headset. * Speak on the internal mic. * Listen on the headphones. * Listen on the speaker. This induces an echo, and given the audio routing is entirely on chip, and the chip doesn't advertise echo cancellation, I don't see how this is avoidable. * Listen on the internal speaker. See also: * `alsa-info`: https://alsa-project.org/db/?f=5e331f5ef10bd167b3bd7640bfcf0e879100f80d * `pa-info`: [pa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8015083/pa… * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/issues/3 * Schematics/code * The device-tree configuration has had a unique audio card name since 5.14: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… * http://files.pine64.org/doc/PinePhone/PinePhone%20v1.2%20Released%20Schemat… * https://xnux.eu/devices/feature/audio-pp.html * https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/allwinner… * https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/allwinner… * https://github.com/torvalds/linux/blob/master/sound/soc/sunxi/sun50i-codec-… * https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.… * https://static.chipdip.ru/lib/126/DOC001126567.pdf Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Add UCM for PinePhone
by GitHub pull_request - edited 26 Mar '22

26 Mar '22

alsa-project/alsa-ucm-conf pull request #134 was edited from tomfitzhenry: Fixes https://github.com/alsa-project/alsa-ucm-conf/issues/124. This PR adds support for the https://wiki.pine64.org/index.php/PinePhone This PR contains: * This UCM config copied from https://gitlab.com/pine64-org/pine64-alsa-ucm/, which was developed by many developers ( https://gitlab.com/pine64-org/pine64-alsa-ucm/-/merge_requests/1 ) and is BSD-3-Clause licensed. * Fix paths to be relative to alsa-ucm-conf root. * Some refactoring of the UCM config, incl. removing duplicate directives, and moving volume directives to BootSequence. * Updating the playback/boost volumes, in response to comments on this PR. I have tested: * HiFi * Record audio via the headset. * Record audio via the internal mic. * Play audio on the headphones. * Play audio on the speaker. * Play audio on the internal speaker. * Voice Call * Speak on the headset. * Speak on the internal mic. * Listen on the headphones. * Listen on the speaker. This induces an echo, and given the audio routing is entirely on chip, and the chip doesn't advertise echo cancellation, I don't see how this is avoidable. * Listen on the internal speaker. See also: * `alsa-info`: https://alsa-project.org/db/?f=5e331f5ef10bd167b3bd7640bfcf0e879100f80d * `pa-info`: [pa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8015083/pa… * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/issues/3 * Schematics/code * The device-tree configuration has had a unique audio card name since 5.14: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… * http://files.pine64.org/doc/PinePhone/PinePhone%20v1.2%20Released%20Schemat… * https://xnux.eu/devices/feature/audio-pp.html * https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/allwinner… * https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/allwinner… * https://github.com/torvalds/linux/blob/master/sound/soc/sunxi/sun50i-codec-… * https://files.pine64.org/doc/datasheet/pine64/Allwinner_A64_User_Manual_V1.… * https://static.chipdip.ru/lib/126/DOC001126567.pdf Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH -next] ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
by Zheng Bin 25 Mar '22

25 Mar '22

If SND_SOC_SOF_PCI_DEV is n, bulding fails: sound/soc/sof/intel/pci-tng.o:(.data+0x1c0): undefined reference to `sof_pci_probe' sound/soc/sof/intel/pci-tng.o:(.data+0x1c8): undefined reference to `sof_pci_remove' sound/soc/sof/intel/pci-tng.o:(.data+0x1e0): undefined reference to `sof_pci_shutdown' sound/soc/sof/intel/pci-tng.o:(.data+0x290): undefined reference to `sof_pci_pm' Make SND_SOC_SOF_MERRIFIELD select SND_SOC_SOF_PCI_DEV to fix this. Fixes: 8d4ba1be3d22 ("ASoC: SOF: pci: split PCI into different drivers") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> --- sound/soc/sof/intel/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig index b53f216d4ecc..172419392b33 100644 --- a/sound/soc/sof/intel/Kconfig +++ b/sound/soc/sof/intel/Kconfig @@ -84,6 +84,7 @@ if SND_SOC_SOF_PCI config SND_SOC_SOF_MERRIFIELD tristate "SOF support for Tangier/Merrifield" default SND_SOC_SOF_PCI + select SND_SOC_SOF_PCI_DEV select SND_SOC_SOF_INTEL_ATOM_HIFI_EP help This adds support for Sound Open Firmware for Intel(R) platforms -- 2.31.1

3 2

[PATCH] ASoC: rt5682s: Separate the regulator consumer controls
by derek.fang＠realtek.com 25 Mar '22

25 Mar '22

From: Derek Fang <derek.fang(a)realtek.com> Control the regulators separately instead of using regulator_bulk to accord to the timing request in the datasheet. Signed-off-by: Derek Fang <derek.fang(a)realtek.com> --- sound/soc/codecs/rt5682s.c | 26 +++++++++++++++++++++----- sound/soc/codecs/rt5682s.h | 6 +++++- 2 files changed, 26 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index 1cba8ec7cedb..b8bf9aede29c 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -42,8 +42,8 @@ static const struct rt5682s_platform_data i2s_default_platform_data = { }; static const char *rt5682s_supply_names[RT5682S_NUM_SUPPLIES] = { - "AVDD", - "MICVDD", + [RT5682S_SUPPLY_AVDD] = "AVDD", + [RT5682S_SUPPLY_MICVDD] = "MICVDD", }; static const struct reg_sequence patch_list[] = { @@ -3025,8 +3025,17 @@ static struct snd_soc_dai_driver rt5682s_dai[] = { static void rt5682s_i2c_disable_regulators(void *data) { struct rt5682s_priv *rt5682s = data; + int ret; + + ret = regulator_disable(rt5682s->supplies[RT5682S_SUPPLY_AVDD].consumer); + if (ret) + pr_err("%s: Failed to disable supply AVDD: %d\n", __func__, ret); - regulator_bulk_disable(ARRAY_SIZE(rt5682s->supplies), rt5682s->supplies); + usleep_range(1000, 1500); + + ret = regulator_disable(rt5682s->supplies[RT5682S_SUPPLY_MICVDD].consumer); + if (ret) + pr_err("%s: Failed to disable supply MICVDD: %d\n", __func__, ret); } static int rt5682s_i2c_probe(struct i2c_client *i2c, @@ -3071,9 +3080,16 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c, if (ret) return ret; - ret = regulator_bulk_enable(ARRAY_SIZE(rt5682s->supplies), rt5682s->supplies); + ret = regulator_enable(rt5682s->supplies[RT5682S_SUPPLY_MICVDD].consumer); + if (ret) { + dev_err(&i2c->dev, "Failed to enable supply MICVDD: %d\n", ret); + return ret; + } + usleep_range(1000, 1500); + + ret = regulator_enable(rt5682s->supplies[RT5682S_SUPPLY_AVDD].consumer); if (ret) { - dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); + dev_err(&i2c->dev, "Failed to enable supply AVDD: %d\n", ret); return ret; } diff --git a/sound/soc/codecs/rt5682s.h b/sound/soc/codecs/rt5682s.h index 397a2531b6f6..7353831c73dd 100644 --- a/sound/soc/codecs/rt5682s.h +++ b/sound/soc/codecs/rt5682s.h @@ -1434,7 +1434,11 @@ struct pll_calc_map { bool sel_ps; }; -#define RT5682S_NUM_SUPPLIES 2 +enum { + RT5682S_SUPPLY_AVDD, + RT5682S_SUPPLY_MICVDD, + RT5682S_NUM_SUPPLIES, +}; struct rt5682s_priv { struct snd_soc_component *component; -- 2.17.1

2 1

[PATCH v2 1/2] ASoC: bindings: fsl-asoc-card: Add compatible for tlv320aic31xx codec
by Ariel D'Alessandro 25 Mar '22

25 Mar '22

Commit 8c9b9cfb7724 ("ASoC: fsl-asoc-card: Support fsl,imx-audio-tlv320aic31xx codec")' added support for tlv320aic31xx codec to fsl-asoc-card, but missed the related device-tree compatible string documentation. Fix this. Signed-off-by: Ariel D'Alessandro <ariel.dalessandro(a)collabora.com> --- Documentation/devicetree/bindings/sound/fsl-asoc-card.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index b219626a5403..8b4f4015cfe4 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -40,6 +40,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-tlv320aic32x4" + "fsl,imx-audio-tlv320aic31xx" + "fsl,imx-audio-si476x" "fsl,imx-audio-wm8958" -- 2.34.1

4 7

Re: Apogee ONEv2 keeps resetting
by Alan Stern 24 Mar '22

24 Mar '22

On Thu, Mar 24, 2022 at 03:44:41AM +0100, Petr Janecek wrote: > Hi Alan, > > On 3/22/22 19:03, Alan Stern wrote: > > On Sun, Mar 20, 2022 at 02:15:40AM +0100, Petr Janecek wrote: > > > Hi, > > > I'm trying to use Apogee ONEv2. From usb dumps under > > > macos or windows it seems like a usb Class Audio 2.0 > > > device, but in linux, it keeps resetting every two seconds > > > or so. It keeps resetting even when the snd-usb-audio > > > driver is disabled, so the problem is probably at a lower > > > level. > > > > Can you post the log output on a system where snd-usb-audio is disabled? > > [ 3412.279063] usb 3-8: new high-speed USB device number 6 using xhci_hcd > [ 3412.470003] usb 3-8: New USB device found, idVendor=0c60, idProduct=0017, > bcdDevice= 1.05 > [ 3412.470017] usb 3-8: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 3412.470023] usb 3-8: Product: ONEv2 > [ 3412.470028] usb 3-8: Manufacturer: Apogee > [ 3412.470033] usb 3-8: SerialNumber: 0C12FF2020204652334D513A7A2A9B > [ 3413.217053] usb 3-8: USB disconnect, device number 6 > [ 3413.629046] usb 3-8: new high-speed USB device number 7 using xhci_hcd > [ 3413.829760] usb 3-8: New USB device found, idVendor=0c60, idProduct=0017, > bcdDevice= 1.05 > [ 3413.829766] usb 3-8: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 3413.829768] usb 3-8: Product: ONEv2 > [ 3413.829770] usb 3-8: Manufacturer: Apogee > [ 3413.829772] usb 3-8: SerialNumber: 0C12FF2020204652334D513A7A2A9B > [ 3414.421964] usb 3-8: USB disconnect, device number 7 > [ 3414.838981] usb 3-8: new high-speed USB device number 8 using xhci_hcd > [ 3415.029947] usb 3-8: New USB device found, idVendor=0c60, idProduct=0017, > bcdDevice= 1.05 > [ 3415.029961] usb 3-8: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 3415.029968] usb 3-8: Product: ONEv2 > [ 3415.029973] usb 3-8: Manufacturer: Apogee > [ 3415.029978] usb 3-8: SerialNumber: 0C12FF2020204652334D513A7A2A9B > [ 3415.627052] usb 3-8: USB disconnect, device number 8 Nothing particularly suspicious there. > > > > The messages below are from v5.16.16, but it behaves > > > the same no matter what I plug it into. > > > > > > [ 253.708616] usb 3-8: new high-speed USB device number 6 using xhci_hcd > > > [ 253.899363] usb 3-8: New USB device found, idVendor=0c60, idProduct=0017, > > > bcdDevice= 1.05 > > > [ 253.899370] usb 3-8: New USB device strings: Mfr=1, Product=2, > > > SerialNumber=3 > > > [ 253.899373] usb 3-8: Product: ONEv2 > > > [ 253.899375] usb 3-8: Manufacturer: Apogee > > > [ 253.899377] usb 3-8: SerialNumber: 0C12FF2020204652334D513A7A2A9B > > > [ 253.960901] mc: Linux media interface: v0.10 > > > > Any idea where that line came from? > > That's from CONFIG_MEDIA_CONTROLLER, which is selected for usb > webcam. It also selects CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER. > Compiled it out, rebooted. Now the line is missing, but no other > change. > > > You should try capturing a usbmon trace showing what happens when the > > device is plugged in and then resets. Preferably on a system where > > snd-usb-audio is disabled. > > Trace from wireshark is attached. The trace doesn't help much, unfortunately. It shows normal device initialization, plus a couple of extra string descriptor reads. About 1/2 second afterward, the device disconnects itself electronically from the USB bus and reconnects 20 ms later. I get the feeling that the device expects to receive some specific messages from the host within that one-half second, and disconnects if it doesn't see them. And presumably it doesn't get what it's looking for even when the USB sound drivers are enabled. Although I doubt it will show anything helpful, you might try collecting a usbmon trace with the sound drivers enabled. Perhaps it will suggest something to the USB audio developers. > > One other thing you might try: Disable runtime PM for USB ("echo -1 > > > /sys/module/usbcore/parameters/autosuspend" before plugging in the > > device). > > Makes no difference -- almost: after few resets it once took much > longer (>10x) to reconnect. Oh well, it was worth a try. Some devices don't like runtime suspend. But obviously that isn't the problem here. Alan Stern

1 0

snd_hda_intel initialization failure with Xen PCI passthrough
by Jason Andryuk 24 Mar '22

24 Mar '22

Hi, I'm running Xen hypervisor and using PCI passthrough to assign an Intel HDA audio device (00:1f.3 Audio device: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 30)) to a Xen HVM virtual machine. I do this for both Linux 5.4.185 and a different Windows 10 VM (only one at a time). The Windows VM seems to work every time. The Linux VM has issues after the first VM boot. This is one boot of the physical hardware and multiple boots of the virtual machines. For Linux, on first boot, the sound card is detected and works properly. After that, things usually don't work. I just ran a reboot loop and it was: 1st boot - audio detected and working 2 & 3 - no audio 4th - audio detected and working 5 - 20 - no audio For boots 2, 3, 5-7, dmesg shows: [ 0.760401] hdaudio hdaudioC0D0: no AFG or MFG node found [ 0.760415] snd_hda_intel 0000:00:06.0: no codecs initialized For boots 8+, the errors changed to: [ 0.783397] hdaudio hdaudioC0D0: cannot read sub nodes for FG 0x10 [ 0.783413] snd_hda_intel 0000:00:06.0: no codecs initialized At this point, I booted a Windows 10 VM and audio works Trying to boot Linux again gives a new error message [ 0.789041] snd_hda_intel 0000:00:06.0: Unknown capability 0 [ 1.811205] snd_hda_intel 0000:00:06.0: No response from codec, resetting bus: last cmd=0x0eef0004 [ 1.811246] hdaudio hdaudioC0D0: cannot read sub nodes for FG 0x10ee [ 1.811263] snd_hda_intel 0000:00:06.0: no codecs initialized Reboot VM and it's back to: [ 0.775917] hdaudio hdaudioC0D0: no AFG or MFG node found [ 0.775932] snd_hda_intel 0000:00:06.0: no codecs initialized Reboot VM and again: [ 0.789069] hdaudio hdaudioC0D0: cannot read sub nodes for FG 0x10 [ 0.789084] snd_hda_intel 0000:00:06.0: no codecs initialized Reboot physical laptop: 1. boot Windows 10 - audio works 2. boot Linux - audio works 3. reboot Linux - no audio [ 0.773111] hdaudio hdaudioC0D0: no AFG or MFG node found [ 0.773151] snd_hda_intel 0000:00:06.0: no codecs initialized This seems to me like Windows does a better job resetting the card to get the audio hardware working. Any suggestions on what to investigate? Thanks, Jason

2 4

[PATCH 1/1] ALSA: hda/realtek: Add mute and micmut LED support for Zbook Fury 17 G9
by Kai-Heng Feng 24 Mar '22

24 Mar '22

Zbook Fury 17 G9 requires the same ALC285_FIXUP_HP_GPIO_LED quirk to make its audio LEDs work. So apply the quirk, and make it the last one since it's an LED quirk. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f6ee67f41c45a..e88fbef57c40c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7011,6 +7011,7 @@ enum { ALC287_FIXUP_LEGION_16ACHG6, ALC287_FIXUP_CS35L41_I2C_2, ALC245_FIXUP_CS35L41_SPI_2, + ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED, ALC245_FIXUP_CS35L41_SPI_4, ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED, ALC285_FIXUP_HP_SPEAKERS_MICMUTE_LED, @@ -8776,6 +8777,12 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = cs35l41_fixup_spi_two, }, + [ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED] = { + .type = HDA_FIXUP_FUNC, + .v.func = cs35l41_fixup_spi_two, + .chained = true, + .chain_id = ALC285_FIXUP_HP_GPIO_LED, + }, [ALC245_FIXUP_CS35L41_SPI_4] = { .type = HDA_FIXUP_FUNC, .v.func = cs35l41_fixup_spi_four, @@ -9031,7 +9038,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x89ac, "HP EliteBook 640 G9", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x89ae, "HP EliteBook 650 G9", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x89c3, "Zbook Studio G9", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), - SND_PCI_QUIRK(0x103c, 0x89c6, "Zbook Fury 17 G9", ALC245_FIXUP_CS35L41_SPI_2), + SND_PCI_QUIRK(0x103c, 0x89c6, "Zbook Fury 17 G9", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x89ca, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), -- 2.34.1

2 1

RE: [PATCH 00/19] ASoC: fsl_micfil: Driver updates
by S.J. Wang 24 Mar '22

24 Mar '22

Hi > > This series has a bunch of cleanups for the FSL MICFIL driver. There is not > much chance for regressions in this series as the driver currently can't work > at all. The MICFIL needs multififo support in the i.MX SDMA engine which is > added with this series, see 10/19. > > The multififo support is selected in the dma phandle arguments in the device > tree, the transfer type must be '25' aka IMX_DMATYPE_MULTI_SAI. > This is set already to 25 in the upstream i.MX8M[NM] dtsi files, but the SDMA > driver silently ignores unsupported values instead of throwing an error. This > is fixed in this series and multififo support is added. > > I think the series should go via the ASoC tree, so I'll need an ack from the > DMA guys for 9/19 and 10/10. Thanks for this series, basically I am ok with the fsl_micfil part, just a comments for sdma change as we have discussed. Best regards Wang Shengjiu > > Sascha > > Sascha Hauer (19): > ASoC: fsl_micfil: Drop unnecessary register read > ASoC: fsl_micfil: Drop unused register read > ASoC: fsl_micfil: drop fsl_micfil_set_mclk_rate() > ASoC: fsl_micfil: do not define SHIFT/MASK for single bits > ASoC: fsl_micfil: use GENMASK to define register bit fields > ASoC: fsl_micfil: use clear/set bits > ASoC: fsl_micfil: drop error messages from failed register accesses > ASoC: fsl_micfil: drop unused variables > dma: imx-sdma: error out on unsupported transfer types > dma: imx-sdma: Add multi fifo support > ASoC: fsl_micfil: add multi fifo support > ASoC: fsl_micfil: use define for OSR default value > ASoC: fsl_micfil: Drop get_pdm_clk() > ASoC: fsl_micfil: simplify clock setting > ASoC: fsl_micfil: rework quality setting > ASoC: fsl_micfil: drop unused include > ASoC: fsl_micfil: drop only once used defines > ASoC: fsl_micfil: drop support for undocumented property > ASoC: fsl_micfil: fold fsl_set_clock_params() into its only user > > drivers/dma/imx-sdma.c | 71 ++++- > include/linux/platform_data/dma-imx.h | 7 + > sound/soc/fsl/fsl_micfil.c | 368 +++++++++----------------- > sound/soc/fsl/fsl_micfil.h | 269 +++++-------------- > 4 files changed, 265 insertions(+), 450 deletions(-) > > -- > 2.30.2

1 0

[v6 0/4] ASoC: mediatek: mt8192: support rt1015p_rt5682s
by Jiaxin Yu 24 Mar '22

24 Mar '22

The series reuses mt8192-mt6359-rt10150rt5682.c for supporting machine driver with rt1015p speaker amplifier and rt5682s headset codec. Changes from v5: - "mediatek,headset-codec" and "mediatek,speaker-codec" drop prefix and move to properties from patternProperties. Changes form v4: - split a large patch into three small patches for easy reviewing - correct coding style Changes from v3: - fix build error: too many arguments for format [-Werror-format-extra-args] Changes from v2: - fix build warnings such as "data argument not used by format string" Changes from v1: - uses the snd_soc_of_get_dai_link_codecs to complete the configuration of dai_link's codecs - uses definitions to simplifies card name and compatible name Jiaxin Yu (4): ASoC: dt-bindings: mt8192-mt6359: add new compatible and new properties ASoC: mediatek: mt8192: refactor for I2S3 DAI link of speaker ASoC: mediatek: mt8192: refactor for I2S8/I2S9 DAI links of headset ASoC: mediatek: mt8192: support rt1015p_rt5682s .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 32 +++ sound/soc/mediatek/Kconfig | 1 + .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 201 +++++++++++------- 3 files changed, 156 insertions(+), 78 deletions(-) -- 2.18.0

2 8

[PATCH v4 1/3] rename tas2764 to tas27xx-Makefile and Kconfig
by Raphael-Xu 23 Mar '22

23 Mar '22

Signed-off-by: Raphael-Xu <13691752556(a)139.com> --- sound/soc/codecs/Kconfig | 13 ++++++++----- sound/soc/codecs/Makefile | 4 ++-- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index d3e5ae8310ef..95f45f3b6b17 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -212,8 +212,8 @@ config SND_SOC_ALL_CODECS imply SND_SOC_STI_SAS imply SND_SOC_TAS2552 imply SND_SOC_TAS2562 - imply SND_SOC_TAS2764 imply SND_SOC_TAS2770 + imply SND_SOC_TAS27XX imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1459,14 +1459,17 @@ config SND_SOC_TAS2562 tristate "Texas Instruments TAS2562 Mono Audio amplifier" depends on I2C -config SND_SOC_TAS2764 - tristate "Texas Instruments TAS2764 Mono Audio amplifier" - depends on I2C - config SND_SOC_TAS2770 tristate "Texas Instruments TAS2770 speaker amplifier" depends on I2C +config SND_SOC_TAS27XX + tristate "Texas Instruments TAS27xx speaker amplifier" + depends on I2C + help + Enable support for Texas Instruments TAS2764 and TAS2780 + power amplifiers + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index ac7f20972470..2cd2b2352ee7 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -334,7 +334,7 @@ snd-soc-simple-amplifier-objs := simple-amplifier.o snd-soc-tpa6130a2-objs := tpa6130a2.o snd-soc-tas2552-objs := tas2552.o snd-soc-tas2562-objs := tas2562.o -snd-soc-tas2764-objs := tas2764.o +snd-soc-tas27xx-objs := tas27xx.o # Mux snd-soc-simple-mux-objs := simple-mux.o @@ -570,7 +570,7 @@ obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o obj-$(CONFIG_SND_SOC_STI_SAS) += snd-soc-sti-sas.o obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o -obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o +obj-$(CONFIG_SND_SOC_TAS27XX) += snd-soc-tas27xx.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o -- 2.35.1

4 7

[PATCH -next] ASoC: tlv320adc3xxx: Fix build error when GPIOLIB is not set
by Baisong Zhong 23 Mar '22

23 Mar '22

sound/soc/codecs/tlv320adc3xxx.c:1352:21: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? sound/soc/codecs/tlv320adc3xxx.c:1352:50: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’? sound/soc/codecs/tlv320adc3xxx.c:1400:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? Fixes: e9a3b57efd28 ("ASoC: codec: tlv320adc3xxx: New codec driver") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Baisong Zhong <zhongbaisong(a)huawei.com> --- sound/soc/codecs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index f46a22660103..1400fc75fd65 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1535,7 +1535,7 @@ config SND_SOC_TFA989X config SND_SOC_TLV320ADC3XXX tristate "Texas Instruments TLV320ADC3001/3101 audio ADC" - depends on I2C + depends on I2C && GPIOLIB help Enable support for Texas Instruments TLV320ADC3001 and TLV320ADC3101 ADCs. -- 2.25.1

2 1

Re: realtek ALC1220 : recording samplerate 10x too slow
by fenugrec＠mail.com 23 Mar '22

23 Mar '22

Hi, > Does it communicate with alsa-lib pulse plugin? Or is it the direct > ALSA device access? Ah, good question. I'm not sure how to determine that but looking into it. Tried strace but I wasn't sure what to look for in the deluge of info. > Do you mean that the sound from arecord gets garbled? Correct : playing back the file just produced (arecord -f S16_LE -c 2 -r 44100 arec_44k.wav), sound is normal until I started audacity, then the rest of the audio is 10x accelerated. > arecord, is it over pulseaudio (with alsa-lib pulse plugin)? Probably ? alsa-lib is installed and pulseaudio running normally, and I just gave default options to arecord. > No, I mean the way to trigger without audacity I understand. I haven't found a simpler way (yet). Thanks, Chris

1 0

[PATCH v3] dt-bindings: mfd: Fix pinctrl node name warnings
by Rob Herring 23 Mar '22

23 Mar '22

The recent addition pinctrl.yaml in commit c09acbc499e8 ("dt-bindings: pinctrl: use pinctrl.yaml") resulted in some node name warnings: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.example.dt.yaml: \ lochnagar-pinctrl: $nodename:0: 'lochnagar-pinctrl' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/mfd/cirrus,madera.example.dt.yaml: \ codec@1a: $nodename:0: 'codec@1a' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: \ pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$' Fix the node names to the preferred 'pinctrl'. For cirrus,madera, nothing from pinctrl.yaml schema is used, so just drop the reference. Fixes: c09acbc499e8 ("dt-bindings: pinctrl: use pinctrl.yaml") Cc: Rafał Miłecki <rafal(a)milecki.pl> Signed-off-by: Rob Herring <robh(a)kernel.org> --- v2: - Fix lochnagar-pinctrl nodename in example v3: - And fix lochnagar-pinctrl nodename in 'required'. Sigh... --- Documentation/devicetree/bindings/mfd/brcm,cru.yaml | 4 ++-- Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml | 6 +++--- .../devicetree/bindings/pinctrl/cirrus,madera.yaml | 3 --- 3 files changed, 5 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml index be4a2df71c25..b85819fbb07c 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml @@ -39,7 +39,7 @@ patternProperties: '^phy@[a-f0-9]+$': $ref: ../phy/bcm-ns-usb2-phy.yaml - '^pin-controller@[a-f0-9]+$': + '^pinctrl@[a-f0-9]+$': $ref: ../pinctrl/brcm,ns-pinmux.yaml '^syscon@[a-f0-9]+$': @@ -94,7 +94,7 @@ examples: reg = <0x180 0x4>; }; - pin-controller@1c0 { + pinctrl@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; reg-names = "cru_gpio_control"; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml index c00ad3e21c21..ad285cb480c9 100644 --- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml @@ -126,7 +126,7 @@ properties: clock-frequency: const: 12288000 - lochnagar-pinctrl: + pinctrl: type: object $ref: /schemas/pinctrl/cirrus,lochnagar.yaml# @@ -255,7 +255,7 @@ required: - reg - reset-gpios - lochnagar-clk - - lochnagar-pinctrl + - pinctrl additionalProperties: false @@ -293,7 +293,7 @@ examples: clock-frequency = <32768>; }; - lochnagar-pinctrl { + pinctrl { compatible = "cirrus,lochnagar-pinctrl"; gpio-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml index c85f759ae5a3..8a90d8273767 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -107,9 +107,6 @@ properties: additionalProperties: false -allOf: - - $ref: "pinctrl.yaml#" - required: - pinctrl-0 - pinctrl-names -- 2.32.0

5 6

realtek ALC1220 : recording samplerate 10x too slow
by cblondin＠mail.com 23 Mar '22

23 Mar '22

Hi, I was redirected here by pulseaudio maintainers for an issue I thought was at that layer : https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1344 After a fresh reboot, arecord / parecord work fine, and the level meters in pavucontrol react normally. If I start audacity, the card gets in a state where the level meters become sluggish, and recording either drops 90% of samples, or records approximately 10x too fast. Playback is always ok, unaffected. I cannot fix that state other than by a reboot. The obvious "closing audacity", restarting the pulseaudio daemon, have no effect. Tried kernels 5.15.24 and a recent 5.17; same problem. I posted some detailed debugging info on that pulseaudio issue tracker, as well as pastebinned alsa-info.sh output here: http://alsa-project.org/db/?f=7ee784003379252acfef25de5fecbdfd559fe342 The problematic hardware is Card 1, Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller [1022:1457]. Test command : pasuspender -- arecord -D hw:1,0 -f S16_LE -c 2 -r 44100 arec_pasusp.wav Here's an example recording of me saying 'test' : https://gitlab.freedesktop.org/pulseaudio/pulseaudio/uploads/5a51081fcd55ec… I have no ~/.asoundrc or related files. Anything I can try to narrow down the cause of this ? Thanks! Chris

3 3

[PATCH v5 00/16] Support external boost at CS35l41 ASoC driver
by Lucas Tanure 23 Mar '22

23 Mar '22

Move the support for CS35L41 external boost to its shared library for ASoC use. This move resulted in cs35l41_hda_reg_sequence being removed, and its steps were broken down into regmap writes or functions from the library. And hardware configuration struct was unified for its use in the shared lib. While at it, some minor bugs were found and fixed it. v5 changelog: - Fixed wrong indentation at Documentation patch - Use of consistent prefix v4 changelog: - Separated GPIO 1 and 2 function enums v3 changelog: - Remove patches already accepted - Improved logic in documentation patch - Documentation patch goes before its code - Fixed missing Signed-off-by - Fixed subject for HDA patches v2 changelog: - Instead of removing the log, playback actions will log the last regmap access. - Documentation patch with the correct subject line and fixed bug reported by Rob Herring on the provided example. Previous versions: v1: https://lkml.org/lkml/2022/3/3/759 v2: https://lkml.org/lkml/2022/3/4/743 v3: https://lkml.org/lkml/2022/3/8/975 v4: https://lkml.org/lkml/2022/3/17/267 David Rhodes (1): ASoC: cs35l41: Document CS35l41 External Boost Lucas Tanure (15): ALSA: cs35l41: Unify hardware configuration ALSA: cs35l41: Check hw_config before using it ALSA: cs35l41: Move cs35l41_gpio_config to shared lib ALSA: hda: cs35l41: Fix I2S params comments ALSA: hda: cs35l41: Always configure the DAI ALSA: hda: cs35l41: Add Boost type flag ALSA: hda: cs35l41: Put the device into safe mode for external boost ALSA: hda: cs35l41: Mute the device before shutdown ALSA: cs35l41: Enable Internal Boost in shared lib ALSA: hda: cs35l41: Move boost config to initialization code ALSA: hda: cs35l41: Remove cs35l41_hda_reg_sequence struct ALSA: hda: cs35l41: Reorganize log for playback actions ALSA: hda: cs35l41: Handle all external boost setups the same way ALSA: hda: cs35l41: Move external boost handling to lib for ASoC use ASoC: cs35l41: Support external boost .../bindings/sound/cirrus,cs35l41.yaml | 44 ++- include/sound/cs35l41.h | 59 +++- sound/pci/hda/cs35l41_hda.c | 295 ++++++------------ sound/pci/hda/cs35l41_hda.h | 27 +- sound/soc/codecs/cs35l41-i2c.c | 4 +- sound/soc/codecs/cs35l41-lib.c | 190 ++++++++++- sound/soc/codecs/cs35l41-spi.c | 4 +- sound/soc/codecs/cs35l41.c | 166 +++++----- sound/soc/codecs/cs35l41.h | 5 +- 9 files changed, 443 insertions(+), 351 deletions(-) -- 2.35.1

2 17

[PATCH 0/4] ALSA: pcm: Fix ioctl races
by Takashi Iwai 23 Mar '22

23 Mar '22

Hi, this is a patch set to address the recently reported bug for the racy PCM ioctls. In short, the current ALSA PCM core doesn't take enough care of concurrent ioctl calls, and the concurrent calls may result in a use-after-free. The reported problem was the concurrent hw_free calls, but there can be similar cases with other code paths like hw_params, prepare, etc, too. The patch set introduces the new runtime->buffer_mutex for protecting those. The first patch is the fix for the reported issue (the races with hw_free), while the rest three are more hardening for the other similar executions. [ Note that the patch 3 was slightly modified from the version I sent to distros list, as I noticed possible lockdep (false-positive) warnings. The behavior is almost same, just written differently. ] thanks, Takashi === Takashi Iwai (4): ALSA: pcm: Fix races among concurrent hw_params and hw_free calls ALSA: pcm: Fix races among concurrent read/write and buffer changes ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls ALSA: pcm: Fix races among concurrent prealloc proc writes include/sound/pcm.h | 1 + sound/core/pcm.c | 2 + sound/core/pcm_lib.c | 4 ++ sound/core/pcm_memory.c | 11 +++-- sound/core/pcm_native.c | 93 +++++++++++++++++++++++++---------------- 5 files changed, 71 insertions(+), 40 deletions(-) -- 2.31.1

3 8

[PATCH v3 0/6] ASoC: mediatek: Add support for MT8195 sound card with max98390 and rt5682
by Trevor Wu 23 Mar '22

23 Mar '22

This series of patches adds support for mt8195 board with mt6359, max98390 and rt5682. To prevent from copy-paste components, mt8195 machine drivers and dt-bindings are merged in the patch. Patches are based on broonie tree "for-next" branch. Changes since v2: - split "merge machine driver" into two parts for better understanding Changes since v1: - remove merged patches about reset controller - propose a common machine driver instead of machine driver common code - propose a common dt-bindings for mt8195 sound card Trevor Wu (6): ASoC: mediatek: mt8195: revise mt8195-mt6359-rt1019-rt5682.c ASoC: mediatek: mt8195: merge machine driver ASoC: dt-bindings: mediatek: mt8195: merge mt8195 machine yaml ASoC: mediatek: mt8195: rename card controls ASoC: mediatek: mt8195: add machine support for max98390 and rt5682 ASoC: dt-bindings: mediatek: mt8195: support mt8195-mt6359-max98390-rt5682 .../sound/mt8195-mt6359-rt1011-rt5682.yaml | 51 - ...-rt1019-rt5682.yaml => mt8195-mt6359.yaml} | 9 +- sound/soc/mediatek/Kconfig | 26 +- sound/soc/mediatek/mt8195/Makefile | 3 +- .../mt8195/mt8195-mt6359-rt1011-rt5682.c | 1198 ----------------- ...mt6359-rt1019-rt5682.c => mt8195-mt6359.c} | 865 +++++++----- 6 files changed, 569 insertions(+), 1583 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml rename Documentation/devicetree/bindings/sound/{mt8195-mt6359-rt1019-rt5682.yaml => mt8195-mt6359.yaml} (84%) delete mode 100644 sound/soc/mediatek/mt8195/mt8195-mt6359-rt1011-rt5682.c rename sound/soc/mediatek/mt8195/{mt8195-mt6359-rt1019-rt5682.c => mt8195-mt6359.c} (78%) -- 2.18.0

3 14

[PATCH v3 1/2] Rename tas2764 to tas27xx
by Raphael-Xu 23 Mar '22

23 Mar '22

Signed-off-by: Raphael-Xu <13691752556(a)139.com> --- sound/soc/codecs/{tas2764.c => tas27xx.c} | 0 sound/soc/codecs/{tas2764.h => tas27xx.h} | 0 2 files changed, 0 insertions(+), 0 deletions(-) rename sound/soc/codecs/{tas2764.c => tas27xx.c} (100%) rename sound/soc/codecs/{tas2764.h => tas27xx.h} (100%) diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas27xx.c similarity index 100% rename from sound/soc/codecs/tas2764.c rename to sound/soc/codecs/tas27xx.c diff --git a/sound/soc/codecs/tas2764.h b/sound/soc/codecs/tas27xx.h similarity index 100% rename from sound/soc/codecs/tas2764.h rename to sound/soc/codecs/tas27xx.h -- 2.35.1

3 3

[PATCH] ASoC: amd: Fix duplicate included module.h/io.h
by Haowen Bai 23 Mar '22

23 Mar '22

Clean up the following includecheck warning: sound/soc/amd/vangogh/acp5x-mach.c: linux/module.h is included more than once. sound/soc/amd/vangogh/acp5x-mach.c: linux/io.h is included more than once. No functional change. Signed-off-by: Haowen Bai <baihaowen(a)meizu.com> --- sound/soc/amd/vangogh/acp5x-mach.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/amd/vangogh/acp5x-mach.c b/sound/soc/amd/vangogh/acp5x-mach.c index 14cf325..cc8316b 100644 --- a/sound/soc/amd/vangogh/acp5x-mach.c +++ b/sound/soc/amd/vangogh/acp5x-mach.c @@ -17,10 +17,8 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/gpio/consumer.h> -#include <linux/module.h> #include <linux/i2c.h> #include <linux/input.h> -#include <linux/io.h> #include <linux/acpi.h> #include <linux/dmi.h> -- 2.7.4

1 0

Line-in is abnormally loud for snd-intel-hda
by GitHub issues - opened 22 Mar '22

22 Mar '22

alsa-project/alsa-lib issue #219 was opened from mpeter50: When I'm on Windows, I sometimes use the line-in Jack to connect my phone to it, so I can either listen to it's sounds along with my PCs sounds or use it as a microphone. I've tried to set this functionality up on my Linux installation, but it seems something is not right. The most basic example is with `arecord`: after setting line-in as the default input device with `alsamixer` I've ran `arecord -vv -fdat foo.wav` so I can check what the ALSA drivers actually "hear" without possible interference of any audio servers. While the command was running, I changed the volume of line-in using he appropriate slider of pavucontrol. When playing the recording, it is clear that while line-in is at 100%, the sound is so loud that it is distorted, and the normal volume is around 12-15% of the actual volume. I don't experience this on Windows, so this is probably not a hardware issue. If I plug a headphone directly into my phone and listen to it, the volume is normal, so this is probably not an issue on the signal producer side either. Checking with `alsamixer`, all capture controls are at 0 volume. But, the controls there might not tell the full truth for multiple reasons: - after reducing the Capture control's volume I can still hear the sound coming from line-in - the Capture control's volume is not in sync with what I see in pavucontrol and other places like KDE's volume menu - the controls Master and PCM in the Playback category does not seem to have any effect. As such, none of the controls control the actual output to my headphone - the "default" card has a single slider, it is named Master and this actually controls the master volume, at least for my headphone Screenshot relevant to the 1st and 2nd points: ![image](https://user-images.githubusercontent.com/83356418/159570560-879f2508-d48c-4718-bf7e-34ee80a4c2e6.png) Additional information: - output of the alsa-info script: [alsa-info.txt](https://github.com/alsa-project/alsa-lib/files/8327703/alsa-… - Content of `/proc/asound/card*/codec#*` files: - [/proc/asound/card0/codec#0](https://github.com/alsa-project/alsa-lib/files/8327730/card0_codec0.txt) - [/proc/asound/card1/codec#0](https://github.com/alsa-project/alsa-lib/files/8327735/card1_codec0.txt) - note: card0 is the HDMI section of my graphics card. I never use it for audio, only jack and bluetooth, so it can probably be ignored - output of `lspci -vvnn`: [lspci.txt](https://github.com/alsa-project/alsa-lib/files/8327777/lspci.txt) Issue URL : https://github.com/alsa-project/alsa-lib/issues/219 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH v2] ALSA: hda/realtek: Add alc256-samsung-headphone fixup
by Matt Kramer 22 Mar '22

22 Mar '22

Changes since v1: Formatting (forgot to disable word-wrap, sorry). This fixes the near-silence of the headphone jack on the ALC256-based Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found through trial and error, using known ALC298 hacks as inspiration. The fixup is auto-enabled only when the NP730QCJ is detected. It can be manually enabled using model=alc256-samsung-headphone. Signed-off-by: Matt Kramer <mccleetus(a)gmail.com> --- Documentation/sound/hd-audio/models.rst | 4 ++++ sound/pci/hda/patch_realtek.c | 11 +++++++++++ 2 files changed, 15 insertions(+) diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst index d25335993e55..9b52f50a6854 100644 --- a/Documentation/sound/hd-audio/models.rst +++ b/Documentation/sound/hd-audio/models.rst @@ -261,6 +261,10 @@ alc-sense-combo huawei-mbx-stereo Enable initialization verbs for Huawei MBX stereo speakers; might be risky, try this at your own risk +alc298-samsung-headphone + Samsung laptops with ALC298 +alc256-samsung-headphone + Samsung laptops with ALC256 ALC66x/67x/892 ============== diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1d14be4ee31d..f6ee67f41c45 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6958,6 +6958,7 @@ enum { ALC236_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF, ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, + ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, ALC295_FIXUP_ASUS_MIC_NO_PRESENCE, ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS, ALC269VC_FIXUP_ACER_HEADSET_MIC, @@ -8286,6 +8287,14 @@ static const struct hda_fixup alc269_fixups[] = { { } }, }, + [ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x20, AC_VERB_SET_COEF_INDEX, 0x08}, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2fcf}, + { } + }, + }, [ALC295_FIXUP_ASUS_MIC_NO_PRESENCE] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -9099,6 +9108,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8), SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), + SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC), @@ -9445,6 +9455,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"}, {.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"}, {.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"}, + {.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256-samsung-headphone"}, {.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"}, {.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"}, {.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"}, -- 2.35.1

2 4

[PATCH BUGFIX] ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
by Giacomo Guiduzzi 22 Mar '22

22 Mar '22

Tests 72 and 78 for ALSA in kselftest fail due to reading inconsistent values from some devices on a VirtualBox Virtual Machine using the snd_intel8x0 driver for the AC'97 Audio Controller device. Taking for example test number 72, this is what the test reports: "Surround Playback Volume.0 expected 1 but read 0, is_volatile 0" "Surround Playback Volume.1 expected 0 but read 1, is_volatile 0" These errors repeat for each value from 0 to 31. Taking a look at these error messages it is possible to notice that the written values are read back swapped. When the write is performed, these values are initially stored in an array used to sanity-check them and write them in the pcmreg array. To write them, the two one-byte values are packed together in a two-byte variable through bitwise operations: the first value is shifted left by one byte and the second value is stored in the right byte through a bitwise OR. When reading the values back, right shifts are performed to retrieve the previously stored bytes. These shifts are executed in the wrong order, thus reporting the values swapped as shown above. This patch fixes this mistake by reversing the read operations' order. Signed-off-by: Giacomo Guiduzzi <guiduzzi.giacomo(a)gmail.com> Signed-off-by: Paolo Valente <paolo.valente(a)linaro.org> --- sound/pci/ac97/ac97_codec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 01f296d524ce..cb60a07d39a8 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -938,8 +938,8 @@ static int snd_ac97_ad18xx_pcm_get_volume(struct snd_kcontrol *kcontrol, struct int codec = kcontrol->private_value & 3; mutex_lock(&ac97->page_mutex); - ucontrol->value.integer.value[0] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 0) & 31); - ucontrol->value.integer.value[1] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 8) & 31); + ucontrol->value.integer.value[0] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 8) & 31); + ucontrol->value.integer.value[1] = 31 - ((ac97->spec.ad18xx.pcmreg[codec] >> 0) & 31); mutex_unlock(&ac97->page_mutex); return 0; } -- 2.25.1

2 1

Re: Apogee ONEv2 keeps resetting
by Alan Stern 22 Mar '22

22 Mar '22

On Sun, Mar 20, 2022 at 02:15:40AM +0100, Petr Janecek wrote: > Hi, > I'm trying to use Apogee ONEv2. From usb dumps under > macos or windows it seems like a usb Class Audio 2.0 > device, but in linux, it keeps resetting every two seconds > or so. It keeps resetting even when the snd-usb-audio > driver is disabled, so the problem is probably at a lower > level. Can you post the log output on a system where snd-usb-audio is disabled? > The messages below are from v5.16.16, but it behaves > the same no matter what I plug it into. > > [ 253.708616] usb 3-8: new high-speed USB device number 6 using xhci_hcd > [ 253.899363] usb 3-8: New USB device found, idVendor=0c60, idProduct=0017, > bcdDevice= 1.05 > [ 253.899370] usb 3-8: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 253.899373] usb 3-8: Product: ONEv2 > [ 253.899375] usb 3-8: Manufacturer: Apogee > [ 253.899377] usb 3-8: SerialNumber: 0C12FF2020204652334D513A7A2A9B > [ 253.960901] mc: Linux media interface: v0.10 Any idea where that line came from? You should try capturing a usbmon trace showing what happens when the device is plugged in and then resets. Preferably on a system where snd-usb-audio is disabled. One other thing you might try: Disable runtime PM for USB ("echo -1 >/sys/module/usbcore/parameters/autosuspend" before plugging in the device). Alan Stern

1 0

[PATCH] ALSA: pcm: Add stream lock during PCM reset ioctl operations
by Takashi Iwai 22 Mar '22

22 Mar '22

snd_pcm_reset() is a non-atomic operation, and it's allowed to run during the PCM stream running. It implies that the manipulation of hw_ptr and other parameters might be racy. This patch adds the PCM stream lock at appropriate places in snd_pcm_*_reset() actions for covering that. Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/pcm_native.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 0e4fbf5fd87b..704fdc9ebf91 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1864,11 +1864,13 @@ static int snd_pcm_do_reset(struct snd_pcm_substream *substream, int err = snd_pcm_ops_ioctl(substream, SNDRV_PCM_IOCTL1_RESET, NULL); if (err < 0) return err; + snd_pcm_stream_lock_irq(substream); runtime->hw_ptr_base = 0; runtime->hw_ptr_interrupt = runtime->status->hw_ptr - runtime->status->hw_ptr % runtime->period_size; runtime->silence_start = runtime->status->hw_ptr; runtime->silence_filled = 0; + snd_pcm_stream_unlock_irq(substream); return 0; } @@ -1876,10 +1878,12 @@ static void snd_pcm_post_reset(struct snd_pcm_substream *substream, snd_pcm_state_t state) { struct snd_pcm_runtime *runtime = substream->runtime; + snd_pcm_stream_lock_irq(substream); runtime->control->appl_ptr = runtime->status->hw_ptr; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && runtime->silence_size > 0) snd_pcm_playback_silence(substream, ULONG_MAX); + snd_pcm_stream_unlock_irq(substream); } static const struct action_ops snd_pcm_action_reset = { -- 2.31.1

2 1

[PATCH] ALSA: hda/realtek: Add alc256-samsung-headphone fixup
by Matt Kramer 22 Mar '22

22 Mar '22

This fixes the near-silence of the headphone jack on the ALC256-based Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found through trial and error, using known ALC298 hacks as inspiration. The fixup is auto-enabled only when the NP730QCJ is detected. It can be manually enabled using model=alc256-samsung-headphone. Signed-off-by: Matt Kramer <mccleetus at gmail.com> --- Documentation/sound/hd-audio/models.rst | 4 ++++ sound/pci/hda/patch_realtek.c | 11 +++++++++++ 2 files changed, 15 insertions(+) diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd- audio/models.rst index d25335993e55..9b52f50a6854 100644 --- a/Documentation/sound/hd-audio/models.rst +++ b/Documentation/sound/hd-audio/models.rst @@ -261,6 +261,10 @@ alc-sense-combo huawei-mbx-stereo Enable initialization verbs for Huawei MBX stereo speakers; might be risky, try this at your own risk +alc298-samsung-headphone + Samsung laptops with ALC298 +alc256-samsung-headphone + Samsung laptops with ALC256 ALC66x/67x/892 ============== diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1d14be4ee31d..f6ee67f41c45 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6958,6 +6958,7 @@ enum { ALC236_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF, ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, + ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, ALC295_FIXUP_ASUS_MIC_NO_PRESENCE, ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS, ALC269VC_FIXUP_ACER_HEADSET_MIC, @@ -8286,6 +8287,14 @@ static const struct hda_fixup alc269_fixups[] = { { } }, }, + [ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x20, AC_VERB_SET_COEF_INDEX, 0x08}, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2fcf}, + { } + }, + }, [ALC295_FIXUP_ASUS_MIC_NO_PRESENCE] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -9099,6 +9108,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8), SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE- X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ- X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), + SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC), @@ -9445,6 +9455,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"}, {.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256- medion-headset"}, {.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298- samsung-headphone"}, + {.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256- samsung-headphone"}, {.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi- headset"}, {.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"}, {.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"}, -- 2.35.1

2 1

[v5 0/4] ASoC: mediatek: mt8192: support rt1015p_rt5682s
by Jiaxin Yu 22 Mar '22

22 Mar '22

The series reuses mt8192-mt6359-rt10150rt5682.c for supporting machine driver with rt1015p speaker amplifier and rt5682s headset codec. Changes form v4: - split a large patch into three small patches for easy reviewing - correct coding style Changes from v3: - fix build error: too many arguments for format [-Werror-format-extra-args] Changes from v2: - fix build warnings such as "data argument not used by format string" Changes from v1: - uses the snd_soc_of_get_dai_link_codecs to complete the configuration of dai_link's codecs - uses definitions to simplifies card name and compatible name Jiaxin Yu (4): ASoC: dt-bindings: mt8192-mt6359: add new compatible and new properties ASoC: mediatek: mt8192: refactor for I2S3 DAI link of speaker ASoC: mediatek: mt8192: refactor for I2S8/I2S9 DAI links of headset ASoC: mediatek: mt8192: support rt1015p_rt5682s .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 29 +++ sound/soc/mediatek/Kconfig | 1 + .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 201 +++++++++++------- 3 files changed, 153 insertions(+), 78 deletions(-) -- 2.18.0

3 16

[PATCH v4 00/16] Support external boost at CS35l41 ASoC driver
by Lucas Tanure 22 Mar '22

22 Mar '22

Move the support for CS35L41 external boost to its shared library for ASoC use. This move resulted in cs35l41_hda_reg_sequence being removed, and its steps were broken down into regmap writes or functions from the library. And hardware configuration struct was unified for its use in the shared lib. While at it, some minor bugs were found and fixed it. v4 changelog: - Separated GPIO 1 and 2 function enums v3 changelog: - Remove patches already accepted - Improved logic in documentation patch - Documentation patch goes before its code - Fixed missing Signed-off-by - Fixed subject for HDA patches v2 changelog: - Instead of removing the log, playback actions will log the last regmap access. - Documentation patch with the correct subject line and fixed bug reported by Rob Herring on the provided example. Previous versions: v1: https://lkml.org/lkml/2022/3/3/759 v2: https://lkml.org/lkml/2022/3/4/743 v3: https://lkml.org/lkml/2022/3/8/975 David Rhodes (1): ASoC: dt-bindings: cs35l41: Document CS35l41 External Boost Lucas Tanure (15): sound: cs35l41: Unify hardware configuration sound: cs35l41: Check hw_config before using it sound: cs35l41: Move cs35l41_gpio_config to shared lib ALSA: hda: cs35l41: Fix I2S params comments ALSA: hda: cs35l41: Always configure the DAI ALSA: hda: cs35l41: Add Boost type flag hda: cs35l41: Put the device into safe mode for external boost hda: cs35l41: Mute the device before shutdown sound: cs35l41: Enable Internal Boost in shared lib ALSA: hda: cs35l41: Move boost config to initialization code ALSA: hda: cs35l41: Remove cs35l41_hda_reg_sequence struct ALSA: hda: cs35l41: Reorganize log for playback actions ALSA: hda: cs35l41: Handle all external boost setups the same way ALSA: hda: cs35l41: Move external boost handling to lib for ASoC use ASoC: cs35l41: Support external boost .../bindings/sound/cirrus,cs35l41.yaml | 44 ++- include/sound/cs35l41.h | 59 +++- sound/pci/hda/cs35l41_hda.c | 295 ++++++------------ sound/pci/hda/cs35l41_hda.h | 27 +- sound/soc/codecs/cs35l41-i2c.c | 4 +- sound/soc/codecs/cs35l41-lib.c | 190 ++++++++++- sound/soc/codecs/cs35l41-spi.c | 4 +- sound/soc/codecs/cs35l41.c | 166 +++++----- sound/soc/codecs/cs35l41.h | 5 +- 9 files changed, 443 insertions(+), 351 deletions(-) -- 2.35.1

4 20

pcm: plugin - fix avail_min calculation on rate plugin
by GitHub pull_request - opened 22 Mar '22

22 Mar '22

alsa-project/alsa-lib pull request #218 was opened from aditpape: commit 88e4ae27, ff1f669d introduced a dynamic recalculation of the slave's avail_min value. The calculated avail_min setting did not take into account, that the avail_min value depends on the used sampling rate and must be adapted accordingly if the slave is using a different sampling rate. That leads to too large/too small calculated avail_min settings and inaccurate period wake-up events if a rate converter plugin is used. This patch is adapting the avail_min calculation to consider a different sampling rate between actual pcm and it's slave. Signed-off-by: Andreas Pape <apape(a)de.adit-jv.com> Request URL : https://github.com/alsa-project/alsa-lib/pull/218 Patch URL : https://github.com/alsa-project/alsa-lib/pull/218.patch Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH v2 1/2] support either TAS2764 or TAS2780 from TI-yaml
by Raphael-Xu 22 Mar '22

22 Mar '22

Signed-off-by: Raphael-Xu <13691752556(a)139.com> --- .../sound/{tas2764.yaml => tas27xx.yaml} | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) rename Documentation/devicetree/bindings/sound/{tas2764.yaml => tas27xx.yaml} (72%) diff --git a/Documentation/devicetree/bindings/sound/tas2764.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml similarity index 72% rename from Documentation/devicetree/bindings/sound/tas2764.yaml rename to Documentation/devicetree/bindings/sound/tas27xx.yaml index 5bf8c76ecda1..191f4bceb4ee 100644 --- a/Documentation/devicetree/bindings/sound/tas2764.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -1,25 +1,27 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -# Copyright (C) 2020 Texas Instruments Incorporated +# Copyright (C) 2020-2022 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas2764.yaml#" +$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Texas Instruments TAS2764 Smart PA +title: Texas Instruments TAS2764/TAS2780 Smart PA maintainers: - - Dan Murphy <dmurphy(a)ti.com> + - Shenghao Ding <shenghao-ding(a)ti.com> description: | - The TAS2764 is a mono, digital input Class-D audio amplifier optimized for - efficiently driving high peak power into small loudspeakers. - Integrated speaker voltage and current sense provides for - real time monitoring of loudspeaker behavior. + The TAS2764/TAS2780 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. Integrated speaker voltage and current sense provides + for real time monitoring of loudspeaker behavior. properties: compatible: enum: - ti,tas2764 + or + - ti,tas2780 reg: maxItems: 1 -- 2.35.1

3 3

[linux-next:master] BUILD REGRESSION f9006d9269eac8ff295c2cb67280c54888c74106
by kernel test robot 22 Mar '22

22 Mar '22

tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master branch HEAD: f9006d9269eac8ff295c2cb67280c54888c74106 Add linux-next specific files for 20220321 Error/Warning reports: https://lore.kernel.org/linux-doc/202202240704.pQD40A9L-lkp@intel.com https://lore.kernel.org/linux-doc/202202240705.t3QbMnlt-lkp@intel.com https://lore.kernel.org/linux-doc/202203180707.vLUjjmqY-lkp@intel.com https://lore.kernel.org/linux-media/202203160306.SfWO9QWV-lkp@intel.com https://lore.kernel.org/llvm/202202240636.szzbhplB-lkp@intel.com https://lore.kernel.org/llvm/202202241039.g8GKEE4O-lkp@intel.com https://lore.kernel.org/llvm/202203190931.X8NH0dPv-lkp@intel.com https://lore.kernel.org/llvm/202203200835.wEdmTF1a-lkp@intel.com Error/Warning: (recently discovered and may have been fixed) Documentation/driver-api/nvdimm/nvdimm.rst:146: (SEVERE/4) Title level inconsistent: Makefile:683: arch/nds32/Makefile: No such file or directory arch/Kconfig:10: can't open file "arch/nds32/Kconfig" drivers/media/platform/samsung/exynos4-is/fimc-isp-video.h:35:6: warning: no previous prototype for 'fimc_isp_video_device_unregister' [-Wmissing-prototypes] drivers/spi/spi-amd.c:296:21: warning: cast to smaller integer type 'enum amd_spi_versions' from 'const void *' [-Wvoid-pointer-to-enum-cast] fs/btrfs/ordered-data.c:168: warning: expecting prototype for Add an ordered extent to the per(). Prototype was for btrfs_add_ordered_extent() instead fs/btrfs/tree-log.c:6934: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ld.lld: error: kernel/built-in.a(kallsyms.o):(function kallsyms_open: .text+0x81c): relocation R_RISCV_PCREL_HI20 out of range: -524450 is not in [-524288, 524287]; references kallsyms_markers ld.lld: error: kernel/built-in.a(kallsyms.o):(function update_iter: .text+0x7a8): relocation R_RISCV_PCREL_HI20 out of range: -524450 is not in [-524288, 524287]; references kallsyms_offsets lib/raid6/neon1.c:39:9: warning: mixing declarations and code is incompatible with standards before C99 [-Wdeclaration-after-statement] lib/raid6/neon2.c:39:9: warning: mixing declarations and code is incompatible with standards before C99 [-Wdeclaration-after-statement] lib/raid6/neon4.c:39:9: warning: mixing declarations and code is incompatible with standards before C99 [-Wdeclaration-after-statement] lib/raid6/neon8.c:39:9: warning: mixing declarations and code is incompatible with standards before C99 [-Wdeclaration-after-statement] lib/raid6/recov_neon_inner.c:55:8: warning: mixing declarations and code is incompatible with standards before C99 [-Wdeclaration-after-statement] make[1]: *** No rule to make target 'arch/nds32/Makefile'. Unverified Error/Warning (likely false positive, please contact us if interested): (.text+0x352): undefined reference to `perf_pmu_unregister' (.text+0xb12): undefined reference to `perf_pmu_register' arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' forming offset [40, 2051] is out of the bounds [0, 40] of object 'tag_buf' with type 'unsigned char[40]' [-Warray-bounds] arch/s390/kernel/machine_kexec.c:57:9: warning: 'memcpy' offset [0, 511] is out of the bounds [0, 0] [-Warray-bounds] arch/sh/kernel/machvec.c:105:33: warning: array subscript 'struct sh_machine_vector[0]' is partly outside array bounds of 'long int[1]' [-Warray-bounds] arch/x86/kernel/cpu/mce/inject.c:355:6: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/ata/libata-sff.c:1649 ata_sff_lost_interrupt() error: uninitialized symbol 'status'. drivers/clk/imx/clk-pll14xx.c:166:2: warning: Value stored to 'pll_div_ctl1' is never read [clang-analyzer-deadcode.DeadStores] drivers/counter/104-quad-8.c:150:9: sparse: unsigned char drivers/counter/104-quad-8.c:150:9: sparse: void drivers/counter/104-quad-8.c:150:9: sparse: sparse: incompatible types in conditional expression (different base types): drivers/firmware/turris-mox-rwtm.c:146:1: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:4374:7: warning: Dereference of null pointer [clang-analyzer-core.NullDereference] drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/dce_calcs.c:1504:2: warning: Value stored to 'num_cursor_lines' is never read [clang-analyzer-deadcode.DeadStores] drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:798:4: warning: Value stored to 'res' is never read [clang-analyzer-deadcode.DeadStores] drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:2129:2: warning: Undefined or garbage value returned to caller [clang-analyzer-core.uninitialized.UndefReturn] drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c:403:5: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores] drivers/gpu/drm/msm/adreno/a6xx_gmu.h:101:16: sparse: sparse: incorrect type in argument 2 (different address spaces) drivers/gpu/drm/msm/adreno/a6xx_gmu.h:96:16: sparse: sparse: incorrect type in argument 1 (different address spaces) drivers/gpu/drm/selftests/test-drm_buddy.c:523:7: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores] drivers/hid/hid-core.c:1665:30: warning: Although the value stored to 'field' is used in the enclosing expression, the value is never actually read from 'field' [clang-analyzer-deadcode.DeadStores] drivers/hwmon/da9055-hwmon.c:201:9: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/hwmon/nsa320-hwmon.c:114:9: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/hwmon/vt8231.c:634:9: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/iio/frequency/admv1014.c:703:22: sparse: sparse: dubious: x & !y drivers/infiniband/core/user_mad.c:564:50: warning: array subscript 'struct ib_rmpp_mad[0]' is partly outside array bounds of 'unsigned char[124]' [-Warray-bounds] drivers/input/serio/ps2-gpio.c:223:4: warning: Value stored to 'rxflags' is never read [clang-analyzer-deadcode.DeadStores] drivers/leds/trigger/ledtrig-tty.c:33:9: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/media/platform/st/stm32/dma2d/dma2d-hw.c:109:1: internal compiler error: in extract_insn, at recog.c:2770 drivers/misc/mei/main.c:1100:9: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/mtd/maps/amd76xrom.c:204:3: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/mtd/maps/ck804xrom.c:234:3: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/net/vxlan/vxlan_core.c:440:34: sparse: sparse: incorrect type in argument 2 (different base types) drivers/nvmem/sunplus-ocotp.c:74:29: sparse: sparse: symbol 'sp_otp_v0' was not declared. Should it be static? drivers/pci/vgaarb.c:213:17: warning: Value stored to 'dev' during its initialization is never read [clang-analyzer-deadcode.DeadStores] drivers/phy/broadcom/phy-brcm-usb.c:233:9: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/platform/x86/asus-laptop.c:856:9: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/platform/x86/fujitsu-tablet.c:458:2: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/platform/x86/think-lmi.c:430:4: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/scsi/lpfc/lpfc_els.c:7983:38: sparse: left side has type unsigned int drivers/scsi/lpfc/lpfc_els.c:7983:38: sparse: right side has type restricted __be32 drivers/scsi/lpfc/lpfc_els.c:7983:38: sparse: sparse: invalid assignment: |= drivers/scsi/lpfc/lpfc_els.c:8504:33: sparse: sparse: incorrect type in assignment (different base types) drivers/tty/serial/sunplus-uart.c:501:26: sparse: sparse: symbol 'sunplus_console_ports' was not declared. Should it be static? drivers/usb/typec/rt1719.c:604:18: warning: Assigned value is garbage or undefined [clang-analyzer-core.uninitialized.Assign] drivers/video/fbdev/matrox/matroxfb_base.c:1094:5: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] include/linux/cacheflush.h:12:46: warning: 'struct folio' declared inside parameter list will not be visible outside of this definition or declaration include/linux/fortify-string.h:336:4: warning: call to __read_overflow2_field declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] include/linux/rcupdate.h:414:36: error: dereferencing pointer to incomplete type 'struct css_set' kernel/sched/core.c:5268:20: warning: no previous prototype for function 'task_sched_runtime' [-Wmissing-prototypes] kernel/sched/core.c:8979:6: warning: no previous prototype for 'idle_task_exit' [-Wmissing-prototypes] kernel/sched/core.c:8979:6: warning: no previous prototype for function 'idle_task_exit' [-Wmissing-prototypes] kernel/sched/core.c:9214:5: warning: no previous prototype for 'sched_cpu_activate' [-Wmissing-prototypes] kernel/sched/core.c:9214:5: warning: no previous prototype for function 'sched_cpu_activate' [-Wmissing-prototypes] kernel/sched/core.c:9259:5: warning: no previous prototype for 'sched_cpu_deactivate' [-Wmissing-prototypes] kernel/sched/core.c:9259:5: warning: no previous prototype for function 'sched_cpu_deactivate' [-Wmissing-prototypes] kernel/sched/core.c:9334:5: warning: no previous prototype for 'sched_cpu_starting' [-Wmissing-prototypes] kernel/sched/core.c:9334:5: warning: no previous prototype for function 'sched_cpu_starting' [-Wmissing-prototypes] kernel/sched/core.c:9355:5: warning: no previous prototype for 'sched_cpu_wait_empty' [-Wmissing-prototypes] kernel/sched/core.c:9355:5: warning: no previous prototype for function 'sched_cpu_wait_empty' [-Wmissing-prototypes] kernel/sched/core.c:9397:5: warning: no previous prototype for 'sched_cpu_dying' [-Wmissing-prototypes] kernel/sched/core.c:9397:5: warning: no previous prototype for function 'sched_cpu_dying' [-Wmissing-prototypes] kernel/sched/core.c:9420:13: warning: no previous prototype for function 'sched_init_smp' [-Wmissing-prototypes] kernel/sched/core.c:9453:13: warning: no previous prototype for function 'sched_init_smp' [-Wmissing-prototypes] kernel/sched/core.c:9481:13: warning: no previous prototype for function 'sched_init' [-Wmissing-prototypes] kernel/sched/fair.c:10665:6: warning: no previous prototype for 'nohz_balance_enter_idle' [-Wmissing-prototypes] kernel/sched/fair.c:10665:6: warning: no previous prototype for function 'nohz_balance_enter_idle' [-Wmissing-prototypes] kernel/sched/loadavg.c:245:6: warning: no previous prototype for 'calc_load_nohz_start' [-Wmissing-prototypes] kernel/sched/loadavg.c:245:6: warning: no previous prototype for function 'calc_load_nohz_start' [-Wmissing-prototypes] kernel/sched/loadavg.c:258:6: warning: no previous prototype for 'calc_load_nohz_remote' [-Wmissing-prototypes] kernel/sched/loadavg.c:258:6: warning: no previous prototype for function 'calc_load_nohz_remote' [-Wmissing-prototypes] kernel/sched/loadavg.c:263:6: warning: no previous prototype for 'calc_load_nohz_stop' [-Wmissing-prototypes] kernel/sched/loadavg.c:263:6: warning: no previous prototype for function 'calc_load_nohz_stop' [-Wmissing-prototypes] kernel/sched/sched.h:87:11: fatal error: 'asm/paravirt_api_clock.h' file not found kernel/sched/sched.h:87:11: fatal error: asm/paravirt_api_clock.h: No such file or directory ld.lld: error: kernel/built-in.a(kallsyms.o):(function get_symbol_offset: .text+0x3ae): relocation R_RISCV_PCREL_HI20 out of range: -524450 is not in [-524288, 524287]; references kallsyms_markers ld.lld: error: kernel/built-in.a(kallsyms.o):(function get_symbol_offset: .text+0x3bc): relocation R_RISCV_PCREL_HI20 out of range: -524450 is not in [-524288, 524287]; references kallsyms_names ld.lld: error: kernel/built-in.a(kallsyms.o):(function update_iter: .text+0x77c): relocation R_RISCV_PCREL_HI20 out of range: -524450 is not in [-524288, 524287]; references kallsyms_token_index ld.lld: error: kernel/built-in.a(kallsyms.o):(function update_iter: .text+0x798): relocation R_RISCV_PCREL_HI20 out of range: -524450 is not in [-524288, 524287]; references kallsyms_token_table lib/overflow_kunit.c:341 overflow_shift_test() warn: '(_a_full << _to_shift)' 32768 can't fit into 32767 '*_d' lib/overflow_kunit.c:394 overflow_shift_test() warn: assigning 18446744073709551611 to unsigned variable '*_d' nd_perf.c:(.text+0x14c): undefined reference to `perf_pmu_migrate_context' nd_perf.c:(.text+0x242): undefined reference to `perf_pmu_migrate_context' nd_perf.c:(.text+0x3f4): undefined reference to `perf_pmu_register' nd_perf.c:(.text+0x464): undefined reference to `perf_pmu_register' nd_perf.c:(.text+0x4e0): undefined reference to `perf_pmu_unregister' nd_perf.c:(.text+0x5ac): undefined reference to `perf_pmu_unregister' nd_perf.c:(.text+0x682): undefined reference to `perf_pmu_migrate_context' net/ipv4/tcp_input.c:5012:2: warning: Value stored to 'reason' is never read [clang-analyzer-deadcode.DeadStores] pahole: .tmp_vmlinux.btf: No such file or directory security/integrity/evm/evm_secfs.c:159:3: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] security/smack/smackfs.c:1186:7: warning: Call to function 'sscanf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sscanf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] sound/soc/codecs/lpass-macro-common.c:53 lpass_macro_pds_init() warn: passing zero to 'ERR_PTR' sound/usb/6fire/chip.c:130:2: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] sound/usb/line6/driver.c:770:2: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] sound/usb/usx2y/usbusx2y.c:382:2: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] {standard input}:1989: Error: unknown pseudo-op: `.sec' Error/Warning ids grouped by kconfigs: gcc_recent_errors |-- alpha-allmodconfig | |-- arch-alpha-include-asm-string.h:warning:__builtin_memcpy-forming-offset-is-out-of-the-bounds-of-object-tag_buf-with-type-unsigned-char | |-- drivers-iio-frequency-admv1014.c:sparse:sparse:dubious:x-y | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- alpha-allyesconfig | |-- arch-alpha-include-asm-string.h:warning:__builtin_memcpy-forming-offset-is-out-of-the-bounds-of-object-tag_buf-with-type-unsigned-char | |-- drivers-iio-frequency-admv1014.c:sparse:sparse:dubious:x-y | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- alpha-buildonly-randconfig-r004-20220320 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- alpha-randconfig-r021-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- alpha-randconfig-r026-20220321 | `-- drivers-media-platform-samsung-exynos4-is-fimc-isp-video.h:warning:no-previous-prototype-for-fimc_isp_video_device_unregister |-- arc-allmodconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-allyesconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-nsimosci_defconfig | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-nsimosci_hs_smp_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-randconfig-r032-20220320 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-randconfig-r032-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- arc-randconfig-r034-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- arc-randconfig-r043-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-randconfig-r043-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-randconfig-s031-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- arm-allmodconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm-allyesconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm-hisi_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm-randconfig-c002-20220320 | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm-randconfig-c002-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm-randconfig-c023-20220321 | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm-randconfig-r012-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm64-allmodconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm64-allyesconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm64-defconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm64-randconfig-r024-20220321 | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm64-randconfig-r033-20220320 | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- csky-allmodconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- csky-allyesconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- csky-defconfig | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- h8300-allmodconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-media-platform-st-stm32-dma2d-dma2d-hw.c:internal-compiler-error:in-extract_insn-at-recog.c | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-cacheflush.h:warning:struct-folio-declared-inside-parameter-list-will-not-be-visible-outside-of-this-definition-or-declaration | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- h8300-allyesconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-media-platform-st-stm32-dma2d-dma2d-hw.c:internal-compiler-error:in-extract_insn-at-recog.c | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-cacheflush.h:warning:struct-folio-declared-inside-parameter-list-will-not-be-visible-outside-of-this-definition-or-declaration | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- h8300-randconfig-r023-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- h8300-randconfig-r025-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- i386-allmodconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-allnoconfig | `-- Documentation-driver-api-nvdimm-nvdimm.rst:(SEVERE-)-Title-level-inconsistent: |-- i386-allyesconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-debian-10.3 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-debian-10.3-kselftests | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-defconfig | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-a011-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-a013-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-a014-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set |-- i386-randconfig-a015-20220321 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-a016-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-c001-20220321 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-c021-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- i386-randconfig-m021-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop | `-- sound-soc-codecs-lpass-macro-common.c-lpass_macro_pds_init()-warn:passing-zero-to-ERR_PTR |-- i386-randconfig-r022-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-s001 | |-- drivers-gpu-drm-gma500-intel_bios.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-const-p-got-unsigned-char-noderef-usertype-__iomem | |-- drivers-gpu-drm-gma500-opregion.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-const-p-got-void-noderef-__iomem-assigned-base | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-s002 | |-- drivers-gpu-drm-gma500-intel_bios.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-const-p-got-unsigned-char-noderef-usertype-__iomem | |-- drivers-gpu-drm-gma500-opregion.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-const-p-got-void-noderef-__iomem-assigned-base | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- ia64-allmodconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- ia64-allyesconfig | |-- (.text):undefined-reference-to-perf_pmu_register | |-- (.text):undefined-reference-to-perf_pmu_unregister | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | `-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_migrate_context |-- ia64-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- m68k-allmodconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-allyesconfig | |-- drivers-counter-quad-.c:sparse:sparse:incompatible-types-in-conditional-expression-(different-base-types): | |-- drivers-counter-quad-.c:sparse:unsigned-char | |-- drivers-counter-quad-.c:sparse:void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-buildonly-randconfig-r003-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-buildonly-randconfig-r004-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- m68k-defconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-mvme147_defconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-randconfig-m031-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- lib-overflow_kunit.c-overflow_shift_test()-warn:(_a_full-_to_shift)-can-t-fit-into-_d | `-- lib-overflow_kunit.c-overflow_shift_test()-warn:assigning-to-unsigned-variable-_d |-- m68k-randconfig-r024-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-sun3x_defconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- microblaze-randconfig-r002-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- mips-allmodconfig | |-- drivers-gpu-drm-msm-adreno-a6xx_gmu.h:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-mem-got-void | |-- drivers-gpu-drm-msm-adreno-a6xx_gmu.h:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-volatile-noderef-__iomem-mem-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- mips-allyesconfig | |-- drivers-gpu-drm-msm-adreno-a6xx_gmu.h:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-mem-got-void | |-- drivers-gpu-drm-msm-adreno-a6xx_gmu.h:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-volatile-noderef-__iomem-mem-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- mips-db1xxx_defconfig | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- mips-randconfig-r015-20220320 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- nds32-allmodconfig | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-allnoconfig | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-allyesconfig | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-buildonly-randconfig-r005-20220320 | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-defconfig | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-randconfig-c004-20220321 | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-randconfig-c024-20220320 | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-randconfig-m031-20220321 | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-randconfig-r006-20220321 | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-randconfig-r022-20220320 | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nios2-allmodconfig | |-- arch-nios2-kernel-misaligned.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-noderef-__user-to-got-unsigned-char-usertype-__pu_ptr | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- nios2-allyesconfig | |-- arch-nios2-kernel-misaligned.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-noderef-__user-to-got-unsigned-char-usertype-__pu_ptr | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- nios2-defconfig | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- nios2-randconfig-r004-20220321 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- openrisc-randconfig-c003-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- openrisc-randconfig-r003-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- openrisc-randconfig-r013-20220321 | |-- drivers-infiniband-core-user_mad.c:warning:array-subscript-struct-ib_rmpp_mad-is-partly-outside-array-bounds-of-unsigned-char | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop | `-- pahole:.tmp_vmlinux.btf:No-such-file-or-directory |-- parisc-allmodconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- parisc-allyesconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- parisc-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- powerpc-allmodconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:left-side-has-type-unsigned-int | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:right-side-has-type-restricted-__be32 | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:incorrect-type-in-assignment-(different-base-types)-expected-unsigned-int-usertype-linkFailureCnt-got-restricted-__be32-usertype | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:invalid-assignment: | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- powerpc-allyesconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:left-side-has-type-unsigned-int | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:right-side-has-type-restricted-__be32 | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:incorrect-type-in-assignment-(different-base-types)-expected-unsigned-int-usertype-linkFailureCnt-got-restricted-__be32-usertype | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:invalid-assignment: | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- powerpc-buildonly-randconfig-r003-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- powerpc-maple_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- powerpc-randconfig-m031-20220321 | `-- drivers-ata-libata-sff.c-ata_sff_lost_interrupt()-error:uninitialized-symbol-status-. |-- powerpc64-randconfig-r014-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- powerpc64-randconfig-r023-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- riscv-allmodconfig | |-- drivers-iio-frequency-admv1014.c:sparse:sparse:dubious:x-y | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- riscv-allyesconfig | |-- drivers-iio-frequency-admv1014.c:sparse:sparse:dubious:x-y | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- riscv-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- riscv-nommu_k210_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- riscv-nommu_virt_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- riscv-randconfig-c024-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- riscv-randconfig-r042-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_migrate_context | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_register | `-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_unregister |-- riscv-rv32_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-allmodconfig | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-allyesconfig | |-- drivers-iio-frequency-admv1014.c:sparse:sparse:dubious:x-y | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-cacheflush.h:warning:struct-folio-declared-inside-parameter-list-will-not-be-visible-outside-of-this-definition-or-declaration | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-defconfig | |-- arch-s390-kernel-machine_kexec.c:warning:memcpy-offset-is-out-of-the-bounds | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-randconfig-c003-20220320 | |-- arch-s390-kernel-machine_kexec.c:warning:memcpy-offset-is-out-of-the-bounds | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_migrate_context | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_register | `-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_unregister |-- s390-randconfig-r036-20220320 | |-- arch-s390-kernel-machine_kexec.c:warning:memcpy-offset-is-out-of-the-bounds | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- s390-randconfig-r044-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- sh-allmodconfig | |-- arch-sh-kernel-machvec.c:warning:array-subscript-struct-sh_machine_vector-is-partly-outside-array-bounds-of-long-int | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop | `-- standard-input:Error:unknown-pseudo-op:sec |-- sh-rsk7201_defconfig | `-- arch-sh-kernel-machvec.c:warning:array-subscript-struct-sh_machine_vector-is-partly-outside-array-bounds-of-long-int |-- sparc-allmodconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc-allyesconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc-randconfig-r002-20220320 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc-randconfig-r013-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc-randconfig-r035-20220321 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc64-randconfig-r004-20220320 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc64-randconfig-r031-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc64-randconfig-r031-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc64-randconfig-r034-20220320 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc64-randconfig-s032-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- um-i386_defconfig | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- um-x86_64_defconfig | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-allmodconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-allnoconfig | `-- Documentation-driver-api-nvdimm-nvdimm.rst:(SEVERE-)-Title-level-inconsistent: |-- x86_64-allyesconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-defconfig | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-kexec | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-a011-20220321 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- x86_64-randconfig-a012-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- x86_64-randconfig-a013-20220321 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-a014-20220321 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-a015-20220321 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- x86_64-randconfig-c002-20220321 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-c022-20220321 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-m001-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-rhel-8.3 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-rhel-8.3-func | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-rhel-8.3-kselftests | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-rhel-8.3-kunit | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- xtensa-allyesconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- xtensa-cadence_csp_defconfig | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop `-- xtensa-randconfig-r005-20220321 |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst clang_recent_errors |-- arm-am200epdkit_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- arm-collie_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- arm-ixp4xx_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- arm-neponset_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- arm-randconfig-c002-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h-file-not-found |-- arm-randconfig-r016-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h-file-not-found |-- arm-spear13xx_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- arm-spear3xx_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- arm64-randconfig-r026-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- lib-raid6-neon1.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 | |-- lib-raid6-neon2.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 | |-- lib-raid6-neon4.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 | |-- lib-raid6-neon8.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 | `-- lib-raid6-recov_neon_inner.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 |-- hexagon-buildonly-randconfig-r005-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- hexagon-buildonly-randconfig-r006-20220320 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- hexagon-buildonly-randconfig-r006-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- hexagon-randconfig-r021-20220320 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- hexagon-randconfig-r036-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- hexagon-randconfig-r041-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- hexagon-randconfig-r041-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- hexagon-randconfig-r045-20220320 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- hexagon-randconfig-r045-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- i386-allmodconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- i386-randconfig-a001-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- i386-randconfig-a002-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- i386-randconfig-a003-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- i386-randconfig-a004-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- i386-randconfig-a005-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- i386-randconfig-a006-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- i386-randconfig-c001-20220321 | |-- drivers-hid-hid-core.c:warning:Although-the-value-stored-to-field-is-used-in-the-enclosing-expression-the-value-is-never-actually-read-from-field-clang-analyzer-deadcode.DeadStores | |-- drivers-hwmon-da9055-hwmon.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous | |-- drivers-hwmon-vt8231.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous-funct | |-- drivers-input-serio-ps2-gpio.c:warning:Value-stored-to-rxflags-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-misc-mei-main.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous-func | |-- drivers-mtd-maps-amd76xrom.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous | |-- drivers-mtd-maps-ck804xrom.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous | |-- drivers-pci-vgaarb.c:warning:Value-stored-to-dev-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-video-fbdev-matrox-matroxfb_base.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace- | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop | |-- net-ipv4-tcp_input.c:warning:Value-stored-to-reason-is-never-read-clang-analyzer-deadcode.DeadStores | `-- security-smack-smackfs.c:warning:Call-to-function-sscanf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous-func |-- mips-allnoconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- mips-omega2p_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- mips-randconfig-c004-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- riscv-buildonly-randconfig-r002-20220320 | |-- drivers-spi-spi-amd.c:warning:cast-to-smaller-integer-type-enum-amd_spi_versions-from-const-void | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop | |-- ld.lld:error:kernel-built-in.a(kallsyms.o):(function-get_symbol_offset:.text):relocation-R_RISCV_PCREL_HI20-out-of-range:is-not-in-references-kallsyms_markers | |-- ld.lld:error:kernel-built-in.a(kallsyms.o):(function-get_symbol_offset:.text):relocation-R_RISCV_PCREL_HI20-out-of-range:is-not-in-references-kallsyms_names | |-- ld.lld:error:kernel-built-in.a(kallsyms.o):(function-kallsyms_open:.text):relocation-R_RISCV_PCREL_HI20-out-of-range:is-not-in-references-kallsyms_markers | |-- ld.lld:error:kernel-built-in.a(kallsyms.o):(function-update_iter:.text):relocation-R_RISCV_PCREL_HI20-out-of-range:is-not-in-references-kallsyms_offsets | |-- ld.lld:error:kernel-built-in.a(kallsyms.o):(function-update_iter:.text):relocation-R_RISCV_PCREL_HI20-out-of-range:is-not-in-references-kallsyms_token_index | `-- ld.lld:error:kernel-built-in.a(kallsyms.o):(function-update_iter:.text):relocation-R_RISCV_PCREL_HI20-out-of-range:is-not-in-references-kallsyms_token_table |-- riscv-randconfig-c006-20220321 | |-- drivers-clk-imx-clk-pll14xx.c:warning:Value-stored-to-pll_div_ctl1-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-firmware-turris-mox-rwtm.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-ana | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_link.c:warning:Dereference-of-null-pointer-clang-analyzer-core.NullDereference | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-dml-calcs-dce_calcs.c:warning:Value-stored-to-num_cursor_lines-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-gpu-drm-amd-amdgpu-amdgpu_discovery.c:warning:Value-stored-to-res-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-gpu-drm-amd-amdgpu-amdgpu_ttm.c:warning:Undefined-or-garbage-value-returned-to-caller-clang-analyzer-core.uninitialized.UndefReturn | |-- drivers-gpu-drm-amd-amdgpu-amdgpu_xgmi.c:warning:Value-stored-to-ret-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-gpu-drm-selftests-test-drm_buddy.c:warning:Value-stored-to-err-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-hid-hid-core.c:warning:Although-the-value-stored-to-field-is-used-in-the-enclosing-expression-the-value-is-never-actually-read-from-field-clang-analyzer-deadcode.DeadStores | |-- drivers-hwmon-nsa320-hwmon.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous | |-- drivers-leds-trigger-ledtrig-tty.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-ana | |-- drivers-pci-vgaarb.c:warning:Value-stored-to-dev-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-phy-broadcom-phy-brcm-usb.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-an | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | `-- net-ipv4-tcp_input.c:warning:Value-stored-to-reason-is-never-read-clang-analyzer-deadcode.DeadStores |-- riscv-randconfig-r016-20220320 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- riscv-randconfig-r042-20220320 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- s390-randconfig-c005-20220321 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- s390-randconfig-r044-20220320 | |-- drivers-spi-spi-amd.c:warning:cast-to-smaller-integer-type-enum-amd_spi_versions-from-const-void | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-a001-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-a002-20220321 | |-- drivers-spi-spi-amd.c:warning:cast-to-smaller-integer-type-enum-amd_spi_versions-from-const-void | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-a003-20220321 | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- x86_64-randconfig-a004-20220321 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-a005-20220321 | |-- drivers-spi-spi-amd.c:warning:cast-to-smaller-integer-type-enum-amd_spi_versions-from-const-void | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-a006-20220321 | |-- drivers-spi-spi-amd.c:warning:cast-to-smaller-integer-type-enum-amd_spi_versions-from-const-void | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-c007-20220321 | |-- arch-x86-kernel-cpu-mce-inject.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analo | |-- drivers-hid-hid-core.c:warning:Although-the-value-stored-to-field-is-used-in-the-enclosing-expression-the-value-is-never-actually-read-from-field-clang-analyzer-deadcode.DeadStores | |-- drivers-input-serio-ps2-gpio.c:warning:Value-stored-to-rxflags-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-platform-x86-asus-laptop.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-ana | |-- drivers-platform-x86-fujitsu-tablet.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with- | |-- drivers-platform-x86-think-lmi.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analo | |-- drivers-usb-typec-rt1719.c:warning:Assigned-value-is-garbage-or-undefined-clang-analyzer-core.uninitialized.Assign | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop | |-- net-ipv4-tcp_input.c:warning:Value-stored-to-reason-is-never-read-clang-analyzer-deadcode.DeadStores | |-- security-integrity-evm-evm_secfs.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-ana | |-- sound-usb-6fire-chip.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous-funct | |-- sound-usb-line6-driver.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous-fun | `-- sound-usb-usx2y-usbusx2y.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous-f `-- x86_64-randconfig-r003-20220321 |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop elapsed time: 726m configs tested: 128 configs skipped: 3 gcc tested configs: arm defconfig arm64 defconfig arm64 allyesconfig arm allmodconfig arm allyesconfig i386 allyesconfig ia64 allmodconfig ia64 allyesconfig x86_64 rhel-8.3-kselftests i386 randconfig-c001-20220321 um i386_defconfig mips allmodconfig riscv allmodconfig um x86_64_defconfig mips allyesconfig riscv allyesconfig sparc allyesconfig alpha allyesconfig arc allyesconfig nios2 allyesconfig arm trizeps4_defconfig arc nsimosci_hs_smp_defconfig mips ip32_defconfig xtensa cadence_csp_defconfig m68k alldefconfig m68k m5475evb_defconfig mips db1xxx_defconfig sh ecovec24_defconfig arm rpc_defconfig powerpc maple_defconfig sh edosk7760_defconfig arc nsimosci_defconfig sh rsk7201_defconfig sh rts7751r2d1_defconfig m68k sun3x_defconfig sh apsh4ad0a_defconfig parisc generic-64bit_defconfig m68k mvme147_defconfig arm hisi_defconfig arm randconfig-c002-20220320 arm randconfig-c002-20220321 ia64 defconfig m68k defconfig m68k allyesconfig m68k allmodconfig csky defconfig alpha defconfig nds32 defconfig arc defconfig sh allmodconfig xtensa allyesconfig h8300 allyesconfig parisc defconfig s390 defconfig parisc64 defconfig s390 allmodconfig s390 allyesconfig parisc allyesconfig i386 debian-10.3 i386 debian-10.3-kselftests i386 defconfig sparc defconfig nds32 allnoconfig nios2 defconfig powerpc allnoconfig powerpc allmodconfig powerpc allyesconfig x86_64 randconfig-a013-20220321 x86_64 randconfig-a012-20220321 x86_64 randconfig-a014-20220321 x86_64 randconfig-a011-20220321 x86_64 randconfig-a016-20220321 x86_64 randconfig-a015-20220321 i386 randconfig-a014-20220321 i386 randconfig-a013-20220321 i386 randconfig-a016-20220321 i386 randconfig-a015-20220321 i386 randconfig-a011-20220321 i386 randconfig-a012-20220321 arc randconfig-r043-20220320 riscv randconfig-r042-20220321 s390 randconfig-r044-20220321 arc randconfig-r043-20220321 riscv nommu_k210_defconfig riscv nommu_virt_defconfig riscv allnoconfig riscv defconfig riscv rv32_defconfig x86_64 defconfig x86_64 kexec x86_64 rhel-8.3 x86_64 rhel-8.3-func x86_64 rhel-8.3-kunit x86_64 allyesconfig clang tested configs: powerpc randconfig-c003-20220321 x86_64 randconfig-c007-20220321 arm randconfig-c002-20220321 i386 randconfig-c001-20220321 mips randconfig-c004-20220321 s390 randconfig-c005-20220321 riscv randconfig-c006-20220321 arm am200epdkit_defconfig arm spear3xx_defconfig arm neponset_defconfig arm spear13xx_defconfig powerpc gamecube_defconfig arm collie_defconfig powerpc mvme5100_defconfig mips cavium_octeon_defconfig arm ixp4xx_defconfig mips lemote2f_defconfig mips omega2p_defconfig x86_64 randconfig-a002-20220321 x86_64 randconfig-a003-20220321 x86_64 randconfig-a005-20220321 x86_64 randconfig-a004-20220321 x86_64 randconfig-a001-20220321 x86_64 randconfig-a006-20220321 i386 randconfig-a003-20220321 i386 randconfig-a004-20220321 i386 randconfig-a005-20220321 i386 randconfig-a001-20220321 i386 randconfig-a006-20220321 i386 randconfig-a002-20220321 hexagon randconfig-r041-20220321 hexagon randconfig-r045-20220321 hexagon randconfig-r045-20220320 hexagon randconfig-r041-20220320 s390 randconfig-r044-20220320 riscv randconfig-r042-20220320 -- 0-DAY CI Kernel Test Service https://01.org/lkp

1 0

realtek ALC1220 : recording samplerate 10x too slow
by fenugrec＠mail.com 22 Mar '22

22 Mar '22

[resent from the correct email address. Sorry !] Hi, I was redirected here by pulseaudio maintainers for an issue I thought was at that layer : https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1344 After a fresh reboot, arecord / parecord work fine, and the level meters in pavucontrol react normally. If I start audacity, the card gets in a state where the level meters become sluggish, and recording either drops 90% of samples, or records approximately 10x too fast. Playback is always ok, unaffected. I cannot fix that state other than by a reboot. The obvious "closing audacity", restarting the pulseaudio daemon, have no effect. Tried kernels 5.15.24 and a recent 5.17; same problem. I posted some detailed debugging info on that pulseaudio issue tracker, as well as pastebinned alsa-info.sh output here: http://alsa-project.org/db/?f=7ee784003379252acfef25de5fecbdfd559fe342 The problematic hardware is Card 1, Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller [1022:1457]. Test command : pasuspender -- arecord -D hw:1,0 -f S16_LE -c 2 -r 44100 arec_pasusp.wav Here's an example recording of me saying 'test' : https://gitlab.freedesktop.org/pulseaudio/pulseaudio/uploads/5a51081fcd55ec… I have no ~/.asoundrc or related files. Anything I can try to narrow down the cause of this ? Thanks! Chris

1 0

[RFC 00/13] ASoC: Intel: avs: Topology and path management
by Cezary Rojewski 21 Mar '22

21 Mar '22

A continuation of avs-driver initial series [1]. This chapter covers path management and topology parsing part which was ealier path of the main series. The two patches that represented these two subjects in the initial series, have been split into many to allow for easier review and discussion. AVS topology is split into two major parts: dictionaries - found within ASoC topology manifest - and path templates - found within DAPM widget private data. Dictionaries job is to reduce the total amount of memory occupied by topology elements. Rather than having every pipeline and module carry its own information, each refers to specific entry in specific dictionary by provided (from topology file) indexes. In consequence, most struct avs_tplg_xxx are made out of pointers. A 'path' represents a DSP side of audio stream in runtime - is a logical container for pipelines which are themselves composed of modules - processing units. Due to high range of possible audio format combinations, there can be more variants of given path (and thus, its pipelines and modules) than total number of pipelines and module instances which firmware supports concurrently, all the instance IDs are allocated dynamically with help of IDA interface. 'Path templates' come from topology file and describe a pattern which is later used to actually create runtime 'path'. [1]: https://lore.kernel.org/alsa-devel/20220207122108.3780926-1-cezary.rojewski… Cezary Rojewski (13): ASoC: Intel: avs: Declare vendor tokens ASoC: Intel: avs: Add topology parsing infrastructure ASoC: Intel: avs: Parse module-extension tuples ASoC: Intel: avs: Parse pplcfg and binding tuples ASoC: Intel: avs: Parse pipeline and module tuples ASoC: Intel: avs: Parse path and path templates tuples ASoC: Intel: avs: Add topology loading operations ASoC: Intel: avs: Declare path and its components ASoC: Intel: avs: Path creation and freeing ASoC: Intel: avs: Path state management ASoC: Intel: avs: Arm paths after creating them ASoC: Intel: avs: Prepare modules before bindings them ASoC: Intel: avs: Configure modules according to their type include/uapi/sound/intel/avs/tokens.h | 126 ++ sound/soc/intel/Kconfig | 2 + sound/soc/intel/avs/Makefile | 3 +- sound/soc/intel/avs/avs.h | 23 + sound/soc/intel/avs/path.c | 1008 ++++++++++++++++ sound/soc/intel/avs/path.h | 72 ++ sound/soc/intel/avs/topology.c | 1600 +++++++++++++++++++++++++ sound/soc/intel/avs/topology.h | 195 +++ 8 files changed, 3028 insertions(+), 1 deletion(-) create mode 100644 include/uapi/sound/intel/avs/tokens.h create mode 100644 sound/soc/intel/avs/path.c create mode 100644 sound/soc/intel/avs/path.h create mode 100644 sound/soc/intel/avs/topology.c create mode 100644 sound/soc/intel/avs/topology.h -- 2.25.1

3 35

[GIT PULL] ASoC updates for v5.18
by Mark Brown 21 Mar '22

21 Mar '22

The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07: Linux 5.17-rc1 (2022-01-23 10:12:53 +0200) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-v5.18 for you to fetch changes up to 49a24e9d9c740d3bd8b1200f225f67d45e3d68a5: Make the SOF control, PCM and PM code IPC agnostic (2022-03-18 20:11:08 +0000) ---------------------------------------------------------------- ASoC: Updates for v5.18 Quite a quiet release for ASoC, lots of work on drivers and platforms but nothing too groundbreaking but not much on the core itself: - Start of moving SoF to support multiple IPC mechanisms. - Use of NHLT ACPI table to reduce the amount of quirking required for Intel systems. - Some building blocks for use in forthcoming Intel AVS driver for legacy Intel DSP firmwares. - Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas RZ/V2L, Texas Instruments TAS585M ---------------------------------------------------------------- Ahmad Fatoum (2): ASoC: fsl_sai: simplify register poking in fsl_sai_set_bclk ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support Ajit Kumar Pandey (13): ASoC: amd: acp: Add generic support for PDM controller on ACP ASoC: amd: acp: Add PDM controller based dmic dai for Renoir ASoC: amd: acp: Add generic PCI driver module for ACP device ASoC: amd: acp: Add ACP init()/deinit() callback for Renoir. ASoC: amd: acp: acp-legacy: Add DMIC dai link support for Renoir ASoC: amd: renoir: Add check for acp configuration flags ASoC: amd: acp: Change card name for Guybrush Machine ASoC: amd: acp-legacy: Add legacy card support for new machines ASoC: amd: acp: Add DMIC machine driver ops ASoC: SOF: amd: Flush cache after ATU_BASE_ADDR_GRP register update ASoC: SOF: amd: Use semaphore register to synchronize ipc's irq ASoC: SOF: amd: Move group register configuration to acp-loader ASoC: SOF: amd: Increase ACP_HW_SEM_RETRY_COUNT value Ajye Huang (2): ASoC: Intel: sof_rt5682: Add support for platform without amplifier ASoC: SOF: Intel: Add topology overwrite for Felwinter Alviro Iskandar Setiawan (1): ASoC: atmel: mchp-pdmc: Fix `-Wpointer-bool-conversion` warning Amadeusz Sławiński (3): ASoC: topology: Remove superfluous error prints ASoC: topology: Allow TLV control to be either read or write ASoC: topology: Optimize soc_tplg_dapm_graph_elems_load behavior Anthony I Gilea (1): ASoC: Intel: sof_sdw: fix quirks for 2022 HP Spectre x360 13" Ariel D'Alessandro (6): ASoC: bindings: fsl-asoc-card: Add mclk-id optional property ASoC: fsl-asoc-card: Add optional dt property for setting mclk-id ASoC: fsl-asoc-card: Remove BCLK default value for tlv320aic31xx card ASoC: Rename tlv320aic31xx-micbias.h as tlv320aic31xx.h ASoC: tlv320aic31xx: Define PLL clock inputs ASoC: bindings: fsl-asoc-card: Add compatible for tlv320aic31xx codec Bard Liao (2): ASoC: SOF: Intel: match sdw version on link_slaves_found ASoC: SOF: Intel: Compare sdw adr directly Brent Lu (5): ASoC: Intel: boards: create sof-realtek-common module ASoC: Intel: sof_rt1308: move rt1308 code to common module ASoC: Intel: cirrus-common: support cs35l41 amplifier ASoC: Intel: sof_ssp_amp: rename driver and support cs35l41 amplifier ASoC: SOF: Intel: add topology overwrite for Taniks Brian Norris (2): drm/rockchip: cdn-dp: Support HDMI codec plug-change callback ASoC: rk3399_gru_sound: Wire up DP jack detection Cezary Rojewski (17): ALSA: hda: Add helper macros for DSP capable devices ASoC: Export DAI register and widget ctor and dctor functions ASoC: Intel: Introduce AVS driver ASoC: Intel: avs: Inter process communication ASoC: Intel: avs: Add code loading requests ASoC: Intel: avs: Add pipeline management requests ASoC: Intel: avs: Add module management requests ASoC: Intel: avs: Add power management requests ASoC: Intel: avs: Add ROM requests ASoC: Intel: avs: Add basefw runtime-parameter requests ASoC: Intel: avs: Firmware resources management utilities ASoC: Intel: avs: Declare module configuration types ASoC: Intel: avs: Dynamic firmware resources management ASoC: Intel: avs: General code loading flow ASoC: Intel: avs: Implement CLDMA transfer ASoC: Intel: avs: Code loading over CLDMA ASoC: Intel: avs: Code loading over HDA Charles Keepax (3): ASoC: wm8962: Allow switching between analog and digital inputs ASoC: madera: Add dependencies on MFD ASoC: wm_adsp: Make compressed buffers optional Claudiu Beznea (1): ASoC: mchp-spdifrx: fix typo Codrin Ciubotariu (4): ASoC: dmaengine: do not use a NULL prepare_slave_config() callback ASoC: dt-bindings: Document Microchip's PDMC ASoC: atmel: mchp-pdmc: add PDMC driver ASoC: atmel: mchp-pdmc: print the correct property name Colin Ian King (3): ASoC: tegra20: spdif: make const array rates static ASoC: atmel: mchp-pdmc: Fix spelling mistake "microchopnes" -> "microphones" ASoC: ti: Fix spelling mistake "cant" -> "can't" Curtis Malainey (1): ASoC: SOF: fix 32 signed bit overflow Dan Carpenter (5): ASoC: qcom: Fix error code in lpass_platform_copy() ASoC: amd: acp: Fix signedness bug in renoir_audio_probe() ASoC: amd: pcm-dma: Fix signedness bug in acp_pdm_audio_probe() ASoC: amd: pcm-dma: Fix signedness bug in acp3x_audio_probe() ASoC: amd: vg: fix signedness bug in acp5x_audio_probe() Daniel Baluta (3): ASoC: SOF: compr: Add compress ops implementation ASoC: SOF: compr: Mark snd_compress_ops static ASoC: SOF: pcm: Add compress_ops for SOF platform component driver Daniel Beer (2): ASoC: add support for TAS5805M digital amplifier ASoC: dt-bindings: add bindings for TI TAS5805M. Derek Fang (1): ASoC: rt5682s: Stabilize the combo jack detection Gongjun Song (1): ASoC: SOF: Intel: pci-tgl: add RPL-S support Jayesh Choudhary (1): ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema Jia-Ju Bai (2): ASoC: rt5663: check the return value of devm_kzalloc() in rt5663_parse_dp() ASoC: acp: check the return value of devm_kzalloc() in acp_legacy_dai_links_create() Jiapeng Chong (3): ASoC: SOF: amd: Remove unneeded semicolon ASoC: SOF: amd: Remove unneeded semicolon ASoC: atmel: mchp-pdmc: Remove unnecessary print function dev_err() Jiasheng Jiang (9): ASoC: codecs: Check for error pointer after calling devm_regmap_init_mmio ASoC: ti: davinci-i2s: Add check for clk_enable() ASoC: mxs-saif: Handle errors for clk_enable ASoC: atmel_ssc_dai: Handle errors for clk_enable ASoC: dwc-i2s: Handle errors for clk_enable ASoC: soc-compress: prevent the potentially use of null pointer ASoC: wm8350: Handle error for wm8350_register_irq ASoC: fsi: Add check for clk_enable ASoC: soc-compress: Change the check for codec_dai Jiaxin Yu (2): ASoC: bt-sco: fix bt-sco-pcm-wb dai widget don't connect to the endpoint ASoC: mediatek: mt8183: support wb bt audio Jonathan Albrieux (1): ASoC: codecs: Add Awinic AW8738 audio amplifier driver Julia Lawall (1): ASoC: Intel: bytcr_wm5102: use GFP_KERNEL Kai Vehmanen (1): ASoC: SOF: Intel: enable DMI L1 for playback streams Keyon Jie (4): ASoC: SOF: add _D3_PERSISTENT flag to fw_ready message ASoC: SOF: Intel: hda-loader: add SSP helper ASoC: SOF: Intel: hda-loader: add IMR restore support ASoC: SOF: add flag to disable IMR restore to sof_debug Krzysztof Kozlowski (6): ASoC: dt-bindings: samsung,aries-wm8994: require sound-dai property ASoC: dt-bindings: samsung,arndale: convert to dtschema ASoC: dt-bindings: samsung,arndale: document ALC5631 ASoC: dt-bindings: samsung,smdk5250: convert to dtschema ASoC: dt-bindings: samsung,snow: convert to dtschema ASoC: dt-bindings: samsung,tm2: convert to dtschema Lad Prabhakar (8): ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively ASoC: sh: rz-ssi: Make the data structures available before registering the handlers ASoC: sh: rz-ssi: Drop ssi parameter from rz_ssi_stream_init() ASoC: sh: rz-ssi: Make return type of rz_ssi_stream_is_valid() to bool ASoC: sh: rz-ssi: Use a do-while loop in rz_ssi_pio_recv() ASoC: sh: rz-ssi: Add rz_ssi_set_substream() helper function ASoC: sh: rz-ssi: Remove duplicate macros ASoC: dt-bindings: renesas,rz-ssi: Document RZ/V2L SoC Lianjie Zhang (1): ASoC: Intel: catpt: use asoc_substream_to_rtd() Libin Yang (1): ASoC: Intel: soc-acpi: add entries in ADL match table Lucas Tanure (2): ASoC: cs35l41: Fix max number of TX channels ASoC: cs35l41: Remove unnecessary param Mac Chiang (1): ASoC: Intel: sof_rt5682: add 512FS MCLK clock configuration Mark Brown (83): Merge existing fixes from asoc/for-5.17 into new branch ASoC: topology: Fixes ASoC: SOF: Intel: don't download firmware at each resume ASoC: Xilinx fixes ASoC: sh: rz-ssi: Code cleanup and fixes ASoC: fsl-asoc-card: Add optional dt property for setting mclk-id ASoC: SOF: Intel: improve SoundWire _ADR handling ASOC: cs42l42: Add support for system suspend ASoC: add support for TAS5805M digital amplifier ASoC: Intel: sof_rt5682: add two derivative options Tegra234 APE support (Re)enable DP/HDMI audio for RK3399 Gru SoC: SOF: ipc: Optimizations for tx message ASOC: amd: acp: Add generic PDM and PCI driver support for ACP ASoC: samsung: Explicitly include gpiolib header ASoC: sun4i-i2s: Support for Allwinner R329 and D1 SoCs ASoC: dmic: Remove spurious gpiolib select ASoC: rt9120: Remove spurious gpiolib select ASoC: simple-amplifier: Remove spurious gpiolib select ASoC: max9759: Remove spurious gpiolib select ASoC: zl38060: Remove spurious gpiolib select ASoC: simple-mux: Depend on gpiolib rather than selecting it ASoC: Fix gpiolib dependencies ASoC: SOF: dma-trace: Change trace_init() ops parameter list Machine driver to support LPASS SC7280 sound card registration ASoC: dt-bindings: samsung: convert to dtschema ASoC: SOF: IPC client infrastructure ASoC: wm8731: Delete empty remove() function ASoC: pcm3168a: code cleanup ASoC: Add Euro Headset support for wcd938x codec ASoC: sc7280: Really depends on SOUNDWIRE Add support for audio on SC7280 based targets ASoC: codecs: add pm runtime support for Qualcomm codecs ASoC: lm49453: Use modern ASoC DAI format terminology ASoC: tscs42xx: Use modern ASoC DAI format terminology ASoC: tscs454: Use modern ASoC DAI format terminology ASoC: sti-sas: Use modern ASoC DAI format terminology ASoC: si476x: Use modern ASoC DAI format terminology ASoC: uda1380: Use modern ASoC DAI format terminology ASoC: uda1334: Use modern ASoC DAI format terminology ASoC: twl4030: Use modern ASoC DAI format terminology ASoC: es7134: Use modern ASoC DAI format terminology ASoC: wl1273: Use modern ASoC DAI format terminology ASoC: es8316: Use modern ASoC DAI format terminology ASoC: inno_rk3036: Use modern ASoC DAI format terminology ASoC: es8328: Use modern ASoC DAI format terminology ASoC: isabelle: Use modern ASoC DAI format terminology ASoC: mc13783: Use modern ASoC DAI format terminology ASoC: pcm3060: Use modern ASoC DAI format terminology ASoC: pcm1681: Use modern ASoC DAI format terminology ASoC: pcm186x: Use modern ASoC DAI format terminology ASoC: pcm3168a: Use modern ASoC DAI format terminology ASoC: pcm512x: Use modern ASoC DAI format terminology ASoC: ml26124: Use modern ASoC DAI format terminology ASoC: uda134x: Use modern ASoC DAI format terminology ASoC: max98088: Use modern ASoC DAI format terminology ASoC: max98095: Use modern ASoC DAI format terminology ASoC: max98371: Use modern ASoC DAI format terminology ASoC: max98390: Use modern ASoC DAI format terminology ASoC: max9850: Use modern ASoC DAI format terminology ASoC: max9860: Use modern ASoC DAI format terminology ASoC: max9867: Use modern ASoC DAI format terminology ASoC: max98925: Use modern ASoC DAI format terminology ASoC: max98926: Use modern ASoC DAI format terminology ASoC: max98927: Use modern ASoC DAI format terminology ASoC: es7241: Use modern ASoC DAI format terminology ASoC: Add power domains support for digital macro codecs ASoC: Intel: machine driver updates for 5.18 ASoC: codecs: Add Awinic AW8738 audio amplifier driver ASoC: audio_graph_card2: Support variable slot widths ASoC: Intel: boards: cleanups for 5.18 ASoC: SOF: updates for 5.18 ASoC: fsl_sai: Cleanups and 1:1 bclk:mclk ratio support Add driver for SAMA7G5's PDMC Clean ups and preparation for IPC abstraction in the SOF driver ALSA/ASoC/SOF/Intel: improve support for ES8336-based platforms Clean ups and preparation for IPC abstraction in the SOF driver ASoC: Intel: AVS - Audio DSP for cAVS ASoC: mediatek: Add mt8195 reset control support ASoC: SOF/Intel: small fixes and updates for 5.18 Make the SOF pcm_hw_params DSP op IPC agnostic Introduce IPC abstraction for SOF topology parsing Make the SOF control, PCM and PM code IPC agnostic Mauro Carvalho Chehab (1): ASoC: Intel: sof_es8336: add quirk for Huawei D15 2021 Meng Tang (4): ASoC: amd: Use platform_get_irq_byname() to get the interrupt ASoC: amd: pcm-dma: Use platform_get_irq() to get the interrupt ASoC: hdac_hda: Avoid unexpected match when pcm_name is "Analog" ASoC: amd: Fix reference to PCM buffer address Miaoqian Lin (13): ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe ASoC: atmel: Fix error handling in snd_proto_probe ASoC: rockchip: i2s: Fix missing clk_disable_unprepare() in rockchip_i2s_probe ASoC: SOF: Add missing of_node_put() in imx8m_probe ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe ASoC: rk817: Fix missing clk_disable_unprepare() in rk817_platform_probe ASoC: mxs: Fix error handling in mxs_sgtl5000_probe ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe ASoC: mediatek: Fix error handling in mt8183_da7219_max98357_dev_probe ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probe ASoC: mediatek: mt8195: Fix error handling in mt8195_mt6359_rt1019_rt5682_dev_probe ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data Minghao Chi (3): ASoC: codecs: remove redundant ret variable ASoC: samsung: remove unneeded ret variable ASoC: ak4642: Use of_device_get_match_data() Mohan Kumar (1): ASoC: tegra: Update AHUB driver for Tegra234 Muralidhar Reddy (1): ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw in ADL match table Nicolin Chen (1): MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl Nikita Yushchenko (4): ASoC: pcm3168a: cleanup unintuitive mask usage ASoC: pcm3168a: refactor hw_params routine ASoC: pcm3168a: refactor format handling ASoC: pcm3168a: remove numeric PCM3168A_NUM_SUPPLIES Nikolai Kostrigin (1): ASoC: Intel: soc-acpi: add ESSX8336 support on Cannon Lake machines Oder Chiou (1): ASoC: rt5640: Remove the sysclk and sysclk_src checking Peter Ujfalusi (31): ASoC: SOF: trace: Simplify count adjustment in trace_read ASoC: SOF: Intel: cnl: Use pm_gate->hdr.cmd in cnl_compact_ipc_compress() ASoC: SOF: ipc: Drop header parameter from sof_ipc_tx_message_unlocked() ASoC: SOF: ipc: Do not allocate buffer for msg_data ASoC: SOF: intel: hda-trace: Pass the dma buffer pointer to hda_dsp_trace_prepare ASoC: SOF: dma-trace: Pass pointer to params_ext struct in trace_init() ASoC: SOF: Drop unused DSP power states: D3_HOT and D3_COLD ASoC: SOF: Move the definition of enum sof_dsp_power_states to global header ASoC: SOF: ipc: Read and pass the whole message to handlers for IPC events ASoC: SOF: Split up utils.c into sof-utils and iomem-utils ASoC: SOF: Introduce IPC SOF client support ASoC: SOF: sof-client: Add support for clients not managed by pm framework ASoC: SOF: Convert the generic IPC message injector into SOF client ASoC: SOF: Convert the generic probe support to SOF client ASoC: SOF: Makefile: Fix randconfig sof-client build when SND_SOC_SOF=y ASoC: SOF: Declare sof_compress_ops in sof-priv.h ASoC: SOF: sof-priv: Drop duplicate sof_compressed_ops declaration ASoC: SOF: amd: acp-pcm: Take buffer information directly from runtime ASoC: SOF: amd: Do not set ipc_pcm_params ops as it is optional ASoC: SOF: ipc-msg-injector: Use devm_kzalloc() for the rx_buffer ASoC: SOF: trace: Use proper DMA direction for the trace data buffer ASoC: SOF: sof-priv: Remove stale snd_sof_ipc_stream_pcm_params() declaration ASoC: SOF: Make pcm_hw_params snd_sof_dsp_ops callback IPC neutral ASoC: SOF: pcm: Remove sof_pcm_dsp_params() wrapper ASoC: SOF: Introduce optional callback to configure stream data offset ASoC: SOF: Mark snd_sof_dsp_ops.ipc_pcm_params() callback optional ASoC: SOF: stream-ipc: Add sof_set_stream_data_offset() ASoC: SOF: Intel: hda-ipc: Add hda_set_stream_data_offset() ASoC: SOF: Intel: Convert to use the generic set_stream_data_offset ops ASoC: SOF: imx: Convert to use the generic set_stream_data_offset ops ASoC: SOF: Remove ipc_pcm_params() ops Pierre-Louis Bossart (30): ASoC: SOF: Intel: use inclusive language for SSP clocks ASoC: SOF: Intel: hdac_ext_stream: consistent prefixes for variables/members ASoC: SOF: core: unregister clients and machine drivers in .shutdown ASoC: soc-acpi: remove sof_fw_filename ASoC: Intel: boards: fix spelling in comments ASoC: SOF: debug: clarify operator precedence ASoC: SOF: Intel: hda: clarify operator precedence ASoC: Intel: boards: remove explicit dependency on GPIOLIB when DMIC is used" ASoC: Intel: boards: add GPIOLIB dependency where missed ASoC: SOF: sof-audio: removed unused function ASoC: soc-acpi: fix kernel-doc descriptor ASoC: soc-acpi: add information on I2S/TDM link mask ASoC: SOF: Intel: hda: retrieve DMIC number for I2S boards ALSA: intel-nhlt: add helper to detect SSP link mask ASoC: SOF: Intel: hda: report SSP link mask to machine driver ASoC: Intel: soc-acpi: quirk topology filename dynamically ALSA: intel-dsp-config: add more ACPI HIDs for ES83x6 devices ASoC: Intel: soc-acpi: add more ACPI HIDs for ES83x6 devices ALSA: intel-dspconfig: add ES8336 support for CNL ASoC: Intel: sof_es8336: make gpio optional ASoC: Intel: sof_es8336: get codec device with ACPI instead of bus search ASoC: Intel: Revert "ASoC: Intel: sof_es8336: add quirk for Huawei D15 2021" ASoC: Intel: sof_es8336: use NHLT information to set dmic and SSP ASoC: Intel: sof_es8336: log all quirks ASoC: Intel: sof_es8336: move comment to the right place ASoC: Intel: sof_es8336: add support for JD inverted quirk ASoC: Intel: sof_es8336: extend machine driver to support ES8326 codec ASoC: Intel: sof_es8336: add cfg-dmics component for UCM support ASoC: Intel: bytcht_es8316: move comment to the right place ASoC: Intel: boards: fix randconfig issue Rander Wang (1): ASoC: SOF: move definition of snd_sof_ipc to header file Randy Dunlap (1): ASoC: max98927: add missing header file Ranjani Sridharan (55): ASoC: SOF: Intel: hda: Remove link assignment limitation ASoC: SOF: Convert the generic IPC flood test into SOF client ASoC: SOF: remove snd_sof_pipeline_find() ASoC: SOF: simplify snd_sof_device_remove() ASoC: SOF: set swidget's core for scheduler widget ASoC: SOF: topology: remove redundant code ASoC: SOF: topology: remove redundant code in sof_link_afe_load() ASoC: SOF: topology: Drop the size parameter from struct sof_topology_token ASoC: SOF: topology: Modify the get_token op for string tokens ASoC: SOF: topology: expose some get_token ops ASoC: SOF: change comp_dai to a pointer in struct snd_sof_dai ASoC: SOF: make struct snd_sof_widget IPC agnostic ASoC: SOF: topology: make sof_route_load() IPC agnostic ASoC: SOF: Add a tuples array to struct snd_sof_widget ASoC: SOF: topology: Modify signature for token parsing functions ASoC: SOF: topology: Rename arguments in sof_parse_token_sets() ASoC: SOF: topology: Rename arguments in sof_parse_tokens() ASoC: SOF: make struct snd_sof_dai IPC agnostic ASoC: SOF: Introduce struct snd_sof_dai_link ASoC: SOF: IPC: Introduce IPC ops ASoC: SOF: topology: Add helper function for processing tuple arrays ASoC: SOF: Introduce IPC3 ops ASoC: SOF: topology: Make scheduler widget parsing IPC agnostic ASoC: SOF: topology: Make buffer widget parsing IPC agnostic ASoC: SOF: topology: Make pga widget parsing IPC agnostic ASoC: SOF: topology: Make mixer widget parsing IPC agnostic ASoC: SOF: topology: Make mux/demux widget parsing IPC agnostic ASoC: SOF: topology: Make src widget parsing IPC agnostic ASoC: SOF: topology: Make asrc widget parsing IPC agnostic ASoC: SOF: topology: Make siggen widget parsing IPC agnostic ASoC: SOF: topology: Make effect widget parsing IPC agnostic ASoC: SOF: topology: Make route setup IPC agnostic ASoC: SOF: topology: Make DAI widget parsing IPC agnostic ASoC: SOF: topology: Make control parsing IPC agnostic ASoC: SOF: topology: Make widget binding IPC agnostic ASoC: SOF: topology: remove snd_sof_complete_pipeline() ASoC: SOF: set up scheduler widget before all other widgets in the pipeline ASoC: SOF: Make sof_widget_setup/free IPC agnostic ASoC: SOF: Make sof_suspend/resume IPC agnostic ASoC: SOF: Introduce IPC ops for kcontrol IO ASoC: SOF: Add IPC3 topology control ops ASoC: SOF: Add volume_get/put IPC3 ops ASoC: SOF: Add switch get/put IPC3 ops ASoC: SOF: Add enum_get/put control ops for IPC3 ASoC: SOF: Add bytes_get/put control IPC ops for IPC3 ASoC: SOF: Add bytes_ext control IPC ops for IPC3 ASoC: SOF: Introduce IPC-specific PCM ops ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function ASoC: SOF: Introduce IPC3 PCM hw_free op ASoC: SOF: Define hw_params PCM op for IPC3 ASoC: SOF: Add trigger PCM op for IPC3 ASoC: SOF: Add dai_link_fixup PCM op for IPC3 ASoC: SOF: expose sof_route_setup() ASoC: SOF: topology: Add ops for setting up and tearing down pipelines ASoC: SOF: Add a new dai_get_clk topology IPC op Ricard Wanderlof (1): ASoC: tlv320adc3xxx: Add IIR filter configuration Richard Fitzgerald (6): ASoC: cs42l42: Report full jack status when plug is detected ASoC: cs42l42: Change jack_detect_mutex to a lock of all IRQ handling ASoC: cs42l42: Handle system suspend ASoC: dt-bindings: audio-graph-port: Add dai-tdm-slot-width-map ASoC: audio_graph_card2: Add support for variable slot widths ASoC: cs42l42: Add warnings about DETECT_MODE and PLL_START Rob Herring (2): ASoC: dt-bindings: realtek,rt5682s: Drop Tegra specifics from example ASoC: dt-bindings: Fix patternProperties with fixed strings Robert Hancock (6): ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting ASoC: xilinx: xlnx_i2s: create drvdata structure ASoC: xilinx: xlnx_i2s: Handle sysclk setting ASoC: simple-card-utils: Set sysclk on all components ASoC: dt-bindings: simple-card: document new system-clock-fixed flag ASoC: simple-card-utils: Add new system-clock-fixed flag Sameer Pujar (2): ASoC: Document Tegra234 APE support ASoC: simple-card-utils: Don't reset clock of active DAI Samuel Holland (3): ASoC: dt-bindings: sun4i-i2s: Add compatibles for R329 and D1 ASoC: sun4i-i2s: Update registers for more channels ASoC: sun4i-i2s: Add support for the R329/D1 variant Sascha Hauer (8): ASoC: fsl_sai: Enable combine mode soft ASoC: fsl: Drop unused argument from imx_pcm_dma_init() ASoC: soc-generic-dmaengine-pcm: set period_bytes_min based on maxburst ASoC: fsl_sai: Drop unnecessary defines ASoC: fsl_sai: simplify irq return value ASoC: fsl_sai: store full version instead of major/minor ASoC: fsl_sai: Use better variable names ASoC: fsl_sai: use DIV_ROUND_CLOSEST() to calculate divider Shengjiu Wang (5): ASoC: soc-generic-dmaengine-pcm: separate max_buffer_size assignment ASoC: soc-core: skip zero num_dai component in searching dai name ASoC: fsl_rpmsg: Remove SET_SYSTEM_SLEEP_PM_OPS callback ASoC: fsl_spdif: Disable TX clock when stop ASoC: fsl_spdif: Add new registers included on i.MX8ULP Shuming Fan (1): ASoC: rt1308-sdw: get calibration params after power on Simon Trimmer (1): ASoC: wm_adsp: Expand firmware loading search options Srinivas Kandagatla (18): ASoC: codecs: va-macro: move to individual clks from bulk ASoC: codecs: rx-macro: move clk provider to managed variants ASoC: codecs: tx-macro: move clk provider to managed variants ASoC: codecs: rx-macro: move to individual clks from bulk ASoC: codecs: tx-macro: move to individual clks from bulk ASoC: codecs: wsa-macro: move to individual clks from bulk ASoC: codecs: wsa-macro: setup soundwire clks correctly ASoC: codecs: tx-macro: setup soundwire clks correctly ASoC: codecs: rx-macro: setup soundwire clks correctly ASoC: codecs: va-macro: add runtime pm support ASoC: codecs: wsa-macro: add runtime pm support ASoC: codecs: rx-macro: add runtime pm support ASoC: codecs: tx-macro: add runtime pm support ASoC: codecs: wcd938x: add simple clk stop support ASoC: codecs: wcd-mbhc: add runtime pm support ASoC: codecs: wsa881x: add runtime pm support ASoC: qcom: select correct WCD938X config for SC7280 ASoC: qcom: fix Kconfig for SC7280 Srinivasa Rao Mandadapu (19): ASoC: google: dt-bindings: Add sc7280-herobrine machine bindings ASoC: qcom: Add macro for lpass DAI id's max limit ASoC: qcom: SC7280: Add machine driver ASoC: codec: wcd938x: Add switch control for selecting CTIA/OMTP Headset ASoC: dt-bindings: wcd938x: Add gpio property for selecting CTIA/OMTP headset ASoC: codec: wcd938x: Update CTIA/OMTP switch control ASoC: qcom: Move lpass_pcm_data structure to lpass header ASoC: qcom: lpass: Add dma fields for codec dma lpass interface ASoC: qcom: Add helper function to get dma control and lpaif handle ASoC: qcom: Add register definition for codec rddma and wrdma ASoC: qcom: Add regmap config support for codec dma driver ASoC: qcom: Add support for codec dma driver ASoC: qcom: Add lpass CPU driver for codec dma control ASoC: dt-bindings: Add SC7280 lpass cpu bindings ASoC: qcom: lpass-sc7280: Add platform driver for lpass audio ASoC: qcom: lpass-platform: Update warning print to control excess logging ASoC: codecs: Add power domains support in digital macro codecs ASoC: qcom: dt-bindings: Add bindings for power domains in lpass digital codecs ASoC: codecs: Fix misplaced lpass_macro_pds_exit call Stephan Gerhold (1): ASoC: dt-bindings: Add schema for "awinic,aw8738" Stephen Kitt (1): ASoC: SOF: Replace zero-length array with flexible-array member Takashi Iwai (1): ASoC: sti: Fix deadlock via snd_pcm_stop_xrun() call Trevor Wu (3): ASoC: mediatek: mt8195: enable apll tuner ASoC: mediatek: mt8195: add reset controller dt-bindings: mediatek: mt8195: add reset property Uwe Kleine-König (1): ASoC: cs42l51: Improve error handling in cs42l51_remove() V sujith kumar Reddy (1): ASoC: amd: sof-mach: Add support for RT5682S and RT1019 card Vijendar Mukunda (4): ASoC: amd: vg: fix for pm resume callback sequence ASoC: amd: vg: update DAI link name ASoC: amd: vg: remove warnings and errors pointed out by checkpatch pl ASoC: amd: vangogh: fix uninitialized symbol warning in machine driver Viorel Suman (2): ASoC: codec: wm8960: complete discharge on BIAS OFF->STANDBY ASoC: fsl_spdif: keep all TxClk sources by txclk array Vlad Karpovich (1): ASoC: wm_adsp: Add trace caps to speaker protection FW Wang Wensheng (1): ASoC: imx-es8328: Fix error return code in imx_es8328_probe() Weiguo Li (1): ASoC: SOF: compress: fix null check after dereference Xiaoke Wang (1): ASoC: samsung: i2s: check the return value of kstrdup() Yang Li (1): ASoC: mediatek: mt8195: Remove unnecessary print function dev_err() Yihao Han (1): ASoC: SOF: topology: Use kmemdup() to replace kzalloc + memcpy Yong Zhi (1): ASoC: Intel: sof_rt5682: add support for systems without i915 audio YueHaibing (2): ASoC: amd: acp5x-pcm-dma: Fix signedness bug ASoC: amd: acp3x: Fix signedness bug in acp3x Zhen Ni (1): ASoC: amd: use asoc_substream_to_rtd() balamurugan.c (1): ASoC: Intel: add RT1308 I2S machine driver and HDMI-in capture via I2S support. zhangqilong (1): ASoC: rockchip: Fix PM usage reference of rockchip_i2s_tdm_resume .../bindings/bus/nvidia,tegra210-aconnect.yaml | 1 + .../bindings/dma/nvidia,tegra210-adma.yaml | 4 +- .../bindings/interrupt-controller/arm,gic.yaml | 1 + .../bindings/sound/allwinner,sun4i-a10-i2s.yaml | 5 + .../devicetree/bindings/sound/arndale.txt | 25 - .../bindings/sound/audio-graph-port.yaml | 20 + .../devicetree/bindings/sound/awinic,aw8738.yaml | 54 + .../bindings/sound/davinci-mcasp-audio.txt | 86 - .../bindings/sound/davinci-mcasp-audio.yaml | 201 ++ .../devicetree/bindings/sound/fsl-asoc-card.txt | 3 + .../bindings/sound/google,sc7280-herobrine.yaml | 180 ++ .../devicetree/bindings/sound/microchip,pdmc.yaml | 100 + .../devicetree/bindings/sound/mt8195-afe-pcm.yaml | 10 + .../bindings/sound/nvidia,tegra186-dspk.yaml | 4 +- .../bindings/sound/nvidia,tegra210-admaif.yaml | 4 +- .../bindings/sound/nvidia,tegra210-adx.yaml | 1 + .../bindings/sound/nvidia,tegra210-ahub.yaml | 1 + .../bindings/sound/nvidia,tegra210-amx.yaml | 3 + .../bindings/sound/nvidia,tegra210-dmic.yaml | 1 + .../bindings/sound/nvidia,tegra210-i2s.yaml | 1 + .../bindings/sound/nvidia,tegra210-mixer.yaml | 1 + .../bindings/sound/nvidia,tegra210-mvc.yaml | 1 + .../bindings/sound/nvidia,tegra210-sfc.yaml | 1 + .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 75 +- .../bindings/sound/qcom,lpass-rx-macro.yaml | 8 + .../bindings/sound/qcom,lpass-tx-macro.yaml | 8 + .../bindings/sound/qcom,lpass-va-macro.yaml | 8 + .../devicetree/bindings/sound/qcom,wcd938x.yaml | 4 + .../devicetree/bindings/sound/realtek,rt5682s.yaml | 8 +- .../devicetree/bindings/sound/renesas,rsnd.yaml | 16 +- .../devicetree/bindings/sound/renesas,rz-ssi.yaml | 3 +- .../bindings/sound/samsung,aries-wm8994.yaml | 4 + .../devicetree/bindings/sound/samsung,arndale.yaml | 45 + .../bindings/sound/samsung,smdk-wm8994.txt | 14 - .../bindings/sound/samsung,smdk5250.yaml | 38 + .../devicetree/bindings/sound/samsung,snow.yaml | 74 + .../bindings/sound/samsung,tm2-audio.txt | 42 - .../devicetree/bindings/sound/samsung,tm2.yaml | 80 + .../devicetree/bindings/sound/simple-card.yaml | 53 +- Documentation/devicetree/bindings/sound/snow.txt | 31 - .../devicetree/bindings/sound/tas5805m.yaml | 56 + .../devicetree/bindings/sound/tlv320aic31xx.txt | 2 +- MAINTAINERS | 5 +- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- drivers/gpu/drm/rockchip/cdn-dp-core.c | 28 + drivers/gpu/drm/rockchip/cdn-dp-core.h | 4 + drivers/soundwire/dmi-quirks.c | 2 +- include/dt-bindings/sound/microchip,pdmc.h | 13 + include/dt-bindings/sound/tlv320aic31xx-micbias.h | 9 - include/dt-bindings/sound/tlv320aic31xx.h | 14 + include/sound/hdaudio.h | 3 + include/sound/hdaudio_ext.h | 50 + include/sound/intel-nhlt.h | 22 +- include/sound/simple_card_utils.h | 12 + include/sound/soc-acpi.h | 29 +- include/sound/soc-dapm.h | 1 + include/sound/sof.h | 8 + include/sound/sof/dai.h | 5 + include/sound/sof/header.h | 2 +- include/sound/sof/info.h | 1 + include/sound/sof/topology.h | 10 +- include/uapi/sound/sof/abi.h | 4 +- sound/hda/intel-dsp-config.c | 36 +- sound/hda/intel-nhlt.c | 22 + sound/soc/amd/Kconfig | 1 + sound/soc/amd/acp-config.c | 9 + sound/soc/amd/acp-pcm-dma.c | 11 +- sound/soc/amd/acp/Kconfig | 10 + sound/soc/amd/acp/Makefile | 4 + sound/soc/amd/acp/acp-legacy-mach.c | 38 +- sound/soc/amd/acp/acp-mach-common.c | 50 + sound/soc/amd/acp/acp-pci.c | 160 + sound/soc/amd/acp/acp-pdm.c | 193 ++ sound/soc/amd/acp/acp-renoir.c | 189 +- sound/soc/amd/acp/acp-sof-mach.c | 14 + sound/soc/amd/acp/amd.h | 23 +- sound/soc/amd/acp/chip_offset_byte.h | 26 + sound/soc/amd/mach-config.h | 1 + sound/soc/amd/raven/acp3x-pcm-dma.c | 11 +- sound/soc/amd/raven/acp3x.h | 2 +- sound/soc/amd/renoir/acp3x-pdm-dma.c | 10 +- sound/soc/amd/renoir/rn-pci-acp3x.c | 7 +- sound/soc/amd/renoir/rn_acp3x.h | 3 + sound/soc/amd/vangogh/acp5x-mach.c | 14 +- sound/soc/amd/vangogh/acp5x-pcm-dma.c | 78 +- sound/soc/amd/vangogh/acp5x.h | 2 +- sound/soc/atmel/Kconfig | 16 + sound/soc/atmel/Makefile | 2 + sound/soc/atmel/atmel_ssc_dai.c | 5 +- sound/soc/atmel/mchp-pdmc.c | 1083 +++++++ sound/soc/atmel/mchp-spdifrx.c | 2 +- sound/soc/atmel/mikroe-proto.c | 20 +- sound/soc/atmel/sam9g20_wm8731.c | 1 + sound/soc/atmel/sam9x5_wm8731.c | 13 +- sound/soc/codecs/Kconfig | 39 +- sound/soc/codecs/Makefile | 6 + sound/soc/codecs/ak4613.c | 11 +- sound/soc/codecs/aw8738.c | 104 + sound/soc/codecs/bt-sco.c | 8 +- sound/soc/codecs/cpcap.c | 2 + sound/soc/codecs/cs35l41.c | 8 +- sound/soc/codecs/cs42l42.c | 179 +- sound/soc/codecs/cs42l42.h | 16 +- sound/soc/codecs/cs42l51-i2c.c | 4 +- sound/soc/codecs/cs42l51.c | 11 +- sound/soc/codecs/cs42l51.h | 2 +- sound/soc/codecs/es7134.c | 2 +- sound/soc/codecs/es7241.c | 30 +- sound/soc/codecs/es8316.c | 4 +- sound/soc/codecs/es8328.c | 16 +- sound/soc/codecs/hdac_hda.c | 7 +- sound/soc/codecs/inno_rk3036.c | 6 +- sound/soc/codecs/isabelle.c | 6 +- sound/soc/codecs/lm49453.c | 10 +- sound/soc/codecs/lpass-macro-common.c | 67 + sound/soc/codecs/lpass-macro-common.h | 17 + sound/soc/codecs/lpass-rx-macro.c | 180 +- sound/soc/codecs/lpass-tx-macro.c | 180 +- sound/soc/codecs/lpass-va-macro.c | 116 +- sound/soc/codecs/lpass-wsa-macro.c | 159 +- sound/soc/codecs/max9759.c | 3 +- sound/soc/codecs/max98088.c | 24 +- sound/soc/codecs/max98095.c | 36 +- sound/soc/codecs/max98371.c | 4 +- sound/soc/codecs/max98390.c | 10 +- sound/soc/codecs/max98390.h | 2 +- sound/soc/codecs/max9850.c | 8 +- sound/soc/codecs/max9860.c | 6 +- sound/soc/codecs/max9867.c | 14 +- sound/soc/codecs/max98925.c | 13 +- sound/soc/codecs/max98926.c | 4 +- sound/soc/codecs/max98927.c | 12 +- sound/soc/codecs/max98927.h | 2 +- sound/soc/codecs/mc13783.c | 15 +- sound/soc/codecs/ml26124.c | 7 +- sound/soc/codecs/msm8916-wcd-analog.c | 22 +- sound/soc/codecs/msm8916-wcd-digital.c | 5 +- sound/soc/codecs/pcm1681.c | 4 +- sound/soc/codecs/pcm186x.c | 19 +- sound/soc/codecs/pcm3060.c | 14 +- sound/soc/codecs/pcm3060.h | 2 +- sound/soc/codecs/pcm3168a.c | 172 +- sound/soc/codecs/pcm512x.c | 32 +- sound/soc/codecs/rk817_codec.c | 6 +- sound/soc/codecs/rt1308-sdw.c | 73 +- sound/soc/codecs/rt5640.c | 3 - sound/soc/codecs/rt5663.c | 2 + sound/soc/codecs/rt5682s.c | 47 +- sound/soc/codecs/si476x.c | 2 +- sound/soc/codecs/sti-sas.c | 6 +- sound/soc/codecs/tas5805m.c | 567 ++++ sound/soc/codecs/tlv320adc3xxx.c | 143 +- sound/soc/codecs/tlv320aic31xx.c | 2 +- sound/soc/codecs/tscs42xx.c | 6 +- sound/soc/codecs/tscs454.c | 28 +- sound/soc/codecs/twl4030.c | 12 +- sound/soc/codecs/uda1334.c | 2 +- sound/soc/codecs/uda134x.c | 6 +- sound/soc/codecs/uda1380.c | 10 +- sound/soc/codecs/wcd-mbhc-v2.c | 26 + sound/soc/codecs/wcd934x.c | 1 + sound/soc/codecs/wcd938x-sdw.c | 1 + sound/soc/codecs/wcd938x.c | 27 + sound/soc/codecs/wl1273.c | 4 +- sound/soc/codecs/wm8350.c | 28 +- sound/soc/codecs/wm8731.c | 6 - sound/soc/codecs/wm8960.c | 13 +- sound/soc/codecs/wm8962.c | 21 +- sound/soc/codecs/wm8971.c | 5 +- sound/soc/codecs/wm_adsp.c | 162 +- sound/soc/codecs/wm_adsp.h | 1 + sound/soc/codecs/wsa881x.c | 53 + sound/soc/dwc/dwc-i2s.c | 17 +- sound/soc/fsl/fsl-asoc-card.c | 7 +- sound/soc/fsl/fsl_aud2htx.c | 2 +- sound/soc/fsl/fsl_esai.c | 2 +- sound/soc/fsl/fsl_rpmsg.c | 2 - sound/soc/fsl/fsl_sai.c | 111 +- sound/soc/fsl/fsl_sai.h | 10 +- sound/soc/fsl/fsl_spdif.c | 97 +- sound/soc/fsl/fsl_spdif.h | 14 + sound/soc/fsl/fsl_ssi.c | 2 +- sound/soc/fsl/imx-es8328.c | 1 + sound/soc/fsl/imx-pcm-dma.c | 2 +- sound/soc/fsl/imx-pcm.h | 7 +- sound/soc/generic/audio-graph-card2.c | 4 + sound/soc/generic/simple-card-utils.c | 187 +- sound/soc/generic/simple-card.c | 26 +- sound/soc/intel/Kconfig | 12 + sound/soc/intel/Makefile | 1 + sound/soc/intel/avs/Makefile | 6 + sound/soc/intel/avs/avs.h | 247 ++ sound/soc/intel/avs/cldma.c | 316 ++ sound/soc/intel/avs/cldma.h | 29 + sound/soc/intel/avs/core.c | 61 + sound/soc/intel/avs/dsp.c | 302 ++ sound/soc/intel/avs/ipc.c | 382 +++ sound/soc/intel/avs/loader.c | 608 ++++ sound/soc/intel/avs/messages.c | 695 ++++ sound/soc/intel/avs/messages.h | 752 +++++ sound/soc/intel/avs/registers.h | 75 + sound/soc/intel/avs/utils.c | 301 ++ sound/soc/intel/boards/Kconfig | 77 +- sound/soc/intel/boards/Makefile | 12 +- sound/soc/intel/boards/bdw-rt5650.c | 2 +- sound/soc/intel/boards/bdw-rt5677.c | 2 +- sound/soc/intel/boards/broadwell.c | 2 +- sound/soc/intel/boards/bxt_da7219_max98357a.c | 2 +- sound/soc/intel/boards/bxt_rt298.c | 2 +- sound/soc/intel/boards/bytcht_cx2072x.c | 2 +- sound/soc/intel/boards/bytcht_da7213.c | 2 +- sound/soc/intel/boards/bytcht_es8316.c | 4 +- sound/soc/intel/boards/bytcr_rt5640.c | 2 +- sound/soc/intel/boards/bytcr_rt5651.c | 2 +- sound/soc/intel/boards/bytcr_wm5102.c | 2 +- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 4 +- sound/soc/intel/boards/cht_bsw_nau8824.c | 4 +- sound/soc/intel/boards/cht_bsw_rt5645.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5672.c | 2 +- sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +- sound/soc/intel/boards/haswell.c | 2 +- sound/soc/intel/boards/sof_cirrus_common.c | 163 + sound/soc/intel/boards/sof_cirrus_common.h | 25 + sound/soc/intel/boards/sof_es8336.c | 134 +- sound/soc/intel/boards/sof_realtek_common.c | 107 + sound/soc/intel/boards/sof_realtek_common.h | 4 + sound/soc/intel/boards/sof_rt5682.c | 56 +- sound/soc/intel/boards/sof_sdw.c | 2 +- sound/soc/intel/boards/sof_ssp_amp.c | 483 +++ sound/soc/intel/catpt/pcm.c | 6 +- sound/soc/intel/common/soc-acpi-intel-adl-match.c | 63 +- sound/soc/intel/common/soc-acpi-intel-bxt-match.c | 18 +- sound/soc/intel/common/soc-acpi-intel-byt-match.c | 11 - sound/soc/intel/common/soc-acpi-intel-cht-match.c | 12 - sound/soc/intel/common/soc-acpi-intel-cml-match.c | 23 +- sound/soc/intel/common/soc-acpi-intel-cnl-match.c | 18 +- sound/soc/intel/common/soc-acpi-intel-ehl-match.c | 1 - sound/soc/intel/common/soc-acpi-intel-glk-match.c | 18 +- sound/soc/intel/common/soc-acpi-intel-hda-match.c | 2 - .../intel/common/soc-acpi-intel-hsw-bdw-match.c | 5 - sound/soc/intel/common/soc-acpi-intel-icl-match.c | 5 - sound/soc/intel/common/soc-acpi-intel-jsl-match.c | 19 +- sound/soc/intel/common/soc-acpi-intel-tgl-match.c | 31 +- sound/soc/mediatek/Kconfig | 2 +- sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 23 +- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 6 +- .../mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c | 18 +- sound/soc/mediatek/mt8195/mt8195-afe-clk.c | 282 +- sound/soc/mediatek/mt8195/mt8195-afe-clk.h | 11 + sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 23 +- .../mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c | 4 +- sound/soc/mxs/mxs-saif.c | 5 +- sound/soc/mxs/mxs-sgtl5000.c | 3 + sound/soc/qcom/Kconfig | 26 + sound/soc/qcom/Makefile | 6 + sound/soc/qcom/lpass-cdc-dma.c | 301 ++ sound/soc/qcom/lpass-cpu.c | 253 +- sound/soc/qcom/lpass-lpaif-reg.h | 127 +- sound/soc/qcom/lpass-platform.c | 635 +++- sound/soc/qcom/lpass-sc7280.c | 438 +++ sound/soc/qcom/lpass.h | 142 + sound/soc/qcom/sc7280.c | 284 ++ sound/soc/rockchip/rk3399_gru_sound.c | 20 + sound/soc/rockchip/rockchip_i2s.c | 15 +- sound/soc/rockchip/rockchip_i2s_tdm.c | 2 +- sound/soc/samsung/i2s.c | 4 + sound/soc/samsung/idma.c | 5 +- sound/soc/samsung/midas_wm1811.c | 1 + sound/soc/sh/fsi.c | 19 +- sound/soc/sh/rz-ssi.c | 109 +- sound/soc/soc-compress.c | 5 + sound/soc/soc-core.c | 3 +- sound/soc/soc-dapm.c | 15 + sound/soc/soc-generic-dmaengine-pcm.c | 20 +- sound/soc/soc-topology.c | 103 +- sound/soc/sof/Kconfig | 33 +- sound/soc/sof/Makefile | 18 +- sound/soc/sof/amd/acp-dsp-offset.h | 1 + sound/soc/sof/amd/acp-ipc.c | 22 +- sound/soc/sof/amd/acp-loader.c | 9 + sound/soc/sof/amd/acp-pcm.c | 15 +- sound/soc/sof/amd/acp-stream.c | 3 + sound/soc/sof/amd/acp-trace.c | 38 +- sound/soc/sof/amd/acp.c | 29 +- sound/soc/sof/amd/acp.h | 9 +- sound/soc/sof/amd/renoir.c | 1 - sound/soc/sof/compress.c | 274 +- sound/soc/sof/control.c | 545 +--- sound/soc/sof/core.c | 73 +- sound/soc/sof/debug.c | 567 +--- sound/soc/sof/imx/imx8.c | 4 +- sound/soc/sof/imx/imx8m.c | 3 +- sound/soc/sof/intel/Kconfig | 19 +- sound/soc/sof/intel/apl.c | 15 +- sound/soc/sof/intel/bdw.c | 2 +- sound/soc/sof/intel/byt.c | 4 +- sound/soc/sof/intel/cnl.c | 21 +- sound/soc/sof/intel/hda-dai.c | 204 +- sound/soc/sof/intel/hda-dsp.c | 20 +- sound/soc/sof/intel/hda-ipc.c | 18 +- sound/soc/sof/intel/hda-loader.c | 118 +- sound/soc/sof/intel/hda-pcm.c | 31 +- sound/soc/sof/intel/hda-probes.c | 104 +- sound/soc/sof/intel/hda-stream.c | 122 +- sound/soc/sof/intel/hda-trace.c | 23 +- sound/soc/sof/intel/hda.c | 307 +- sound/soc/sof/intel/hda.h | 90 +- sound/soc/sof/intel/icl.c | 15 +- sound/soc/sof/intel/pci-tgl.c | 2 + sound/soc/sof/intel/pci-tng.c | 3 +- sound/soc/sof/intel/tgl.c | 15 +- sound/soc/sof/{utils.c => iomem-utils.c} | 61 +- sound/soc/sof/ipc.c | 142 +- sound/soc/sof/ipc3-control.c | 594 ++++ sound/soc/sof/ipc3-ops.h | 21 + sound/soc/sof/ipc3-pcm.c | 372 +++ sound/soc/sof/ipc3-topology.c | 2393 ++++++++++++++ sound/soc/sof/ipc3.c | 45 + sound/soc/sof/ops.h | 68 +- sound/soc/sof/pcm.c | 353 +-- sound/soc/sof/pm.c | 93 +- sound/soc/sof/sof-audio.c | 546 +--- sound/soc/sof/sof-audio.h | 235 +- sound/soc/sof/sof-client-ipc-flood-test.c | 396 +++ sound/soc/sof/sof-client-ipc-msg-injector.c | 192 ++ sound/soc/sof/sof-client-probes.c | 821 +++++ sound/soc/sof/sof-client-probes.h | 31 + sound/soc/sof/sof-client.c | 469 +++ sound/soc/sof/sof-client.h | 67 + sound/soc/sof/sof-pci-dev.c | 16 + sound/soc/sof/sof-priv.h | 221 +- sound/soc/sof/sof-probes.c | 364 --- sound/soc/sof/sof-probes.h | 38 - sound/soc/sof/sof-utils.c | 77 + sound/soc/sof/sof-utils.h | 19 + sound/soc/sof/stream-ipc.c | 9 +- sound/soc/sof/topology.c | 3312 +++++--------------- sound/soc/sof/trace.c | 21 +- sound/soc/sti/uniperif_player.c | 6 +- sound/soc/sti/uniperif_reader.c | 2 +- sound/soc/sunxi/sun4i-i2s.c | 68 +- sound/soc/tegra/tegra20_spdif.c | 2 +- sound/soc/tegra/tegra210_ahub.c | 146 +- sound/soc/tegra/tegra210_ahub.h | 4 +- sound/soc/ti/davinci-i2s.c | 5 +- sound/soc/ti/omap-dmic.c | 2 +- sound/soc/xilinx/xlnx_formatter_pcm.c | 52 +- sound/soc/xilinx/xlnx_i2s.c | 147 +- 348 files changed, 21931 insertions(+), 7219 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/arndale.txt create mode 100644 Documentation/devicetree/bindings/sound/awinic,aw8738.yaml delete mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml create mode 100644 Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml create mode 100644 Documentation/devicetree/bindings/sound/microchip,pdmc.yaml create mode 100644 Documentation/devicetree/bindings/sound/samsung,arndale.yaml delete mode 100644 Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt create mode 100644 Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml create mode 100644 Documentation/devicetree/bindings/sound/samsung,snow.yaml delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2.yaml delete mode 100644 Documentation/devicetree/bindings/sound/snow.txt create mode 100644 Documentation/devicetree/bindings/sound/tas5805m.yaml create mode 100644 include/dt-bindings/sound/microchip,pdmc.h delete mode 100644 include/dt-bindings/sound/tlv320aic31xx-micbias.h create mode 100644 include/dt-bindings/sound/tlv320aic31xx.h create mode 100644 sound/soc/amd/acp/acp-pci.c create mode 100644 sound/soc/amd/acp/acp-pdm.c create mode 100644 sound/soc/atmel/mchp-pdmc.c create mode 100644 sound/soc/codecs/aw8738.c create mode 100644 sound/soc/codecs/lpass-macro-common.c create mode 100644 sound/soc/codecs/lpass-macro-common.h create mode 100644 sound/soc/codecs/tas5805m.c create mode 100644 sound/soc/intel/avs/Makefile create mode 100644 sound/soc/intel/avs/avs.h create mode 100644 sound/soc/intel/avs/cldma.c create mode 100644 sound/soc/intel/avs/cldma.h create mode 100644 sound/soc/intel/avs/core.c create mode 100644 sound/soc/intel/avs/dsp.c create mode 100644 sound/soc/intel/avs/ipc.c create mode 100644 sound/soc/intel/avs/loader.c create mode 100644 sound/soc/intel/avs/messages.c create mode 100644 sound/soc/intel/avs/messages.h create mode 100644 sound/soc/intel/avs/registers.h create mode 100644 sound/soc/intel/avs/utils.c create mode 100644 sound/soc/intel/boards/sof_cirrus_common.c create mode 100644 sound/soc/intel/boards/sof_cirrus_common.h create mode 100644 sound/soc/intel/boards/sof_ssp_amp.c create mode 100644 sound/soc/qcom/lpass-cdc-dma.c create mode 100644 sound/soc/qcom/lpass-sc7280.c create mode 100644 sound/soc/qcom/sc7280.c rename sound/soc/sof/{utils.c => iomem-utils.c} (59%) create mode 100644 sound/soc/sof/ipc3-control.c create mode 100644 sound/soc/sof/ipc3-ops.h create mode 100644 sound/soc/sof/ipc3-pcm.c create mode 100644 sound/soc/sof/ipc3-topology.c create mode 100644 sound/soc/sof/ipc3.c create mode 100644 sound/soc/sof/sof-client-ipc-flood-test.c create mode 100644 sound/soc/sof/sof-client-ipc-msg-injector.c create mode 100644 sound/soc/sof/sof-client-probes.c create mode 100644 sound/soc/sof/sof-client-probes.h create mode 100644 sound/soc/sof/sof-client.c create mode 100644 sound/soc/sof/sof-client.h delete mode 100644 sound/soc/sof/sof-probes.c delete mode 100644 sound/soc/sof/sof-probes.h create mode 100644 sound/soc/sof/sof-utils.c create mode 100644 sound/soc/sof/sof-utils.h

2 1

[PATCH] ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
by Jiaxin Yu 21 Mar '22

21 Mar '22

Fixes the following build errors when mt6358 is configured as module: >> ERROR: modpost: "mt6358_set_mtkaif_protocol" >> [sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.ko] undefined! >> ERROR: modpost: "mt6358_set_mtkaif_protocol" >> [sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.ko] undefined! Fixes: 6a8d4198ca80 ("ASoC: mediatek: mt6358: add codec driver") Signed-off-by: Jiaxin Yu <jiaxin.yu(a)mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno(a)collabora.com> --- sound/soc/codecs/mt6358.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/codecs/mt6358.c b/sound/soc/codecs/mt6358.c index 9b263a9a669d..4c7b5d940799 100644 --- a/sound/soc/codecs/mt6358.c +++ b/sound/soc/codecs/mt6358.c @@ -107,6 +107,7 @@ int mt6358_set_mtkaif_protocol(struct snd_soc_component *cmpnt, priv->mtkaif_protocol = mtkaif_protocol; return 0; } +EXPORT_SYMBOL_GPL(mt6358_set_mtkaif_protocol); static void playback_gpio_set(struct mt6358_priv *priv) { @@ -273,6 +274,7 @@ int mt6358_mtkaif_calibration_enable(struct snd_soc_component *cmpnt) 1 << RG_AUD_PAD_TOP_DAT_MISO_LOOPBACK_SFT); return 0; } +EXPORT_SYMBOL_GPL(mt6358_mtkaif_calibration_enable); int mt6358_mtkaif_calibration_disable(struct snd_soc_component *cmpnt) { @@ -296,6 +298,7 @@ int mt6358_mtkaif_calibration_disable(struct snd_soc_component *cmpnt) capture_gpio_reset(priv); return 0; } +EXPORT_SYMBOL_GPL(mt6358_mtkaif_calibration_disable); int mt6358_set_mtkaif_calibration_phase(struct snd_soc_component *cmpnt, int phase_1, int phase_2) @@ -310,6 +313,7 @@ int mt6358_set_mtkaif_calibration_phase(struct snd_soc_component *cmpnt, phase_2 << RG_AUD_PAD_TOP_PHASE_MODE2_SFT); return 0; } +EXPORT_SYMBOL_GPL(mt6358_set_mtkaif_calibration_phase); /* dl pga gain */ enum { -- 2.25.1

2 1

Huge avail value caused by inconsistency between snd_pcm_multi_status() and snd_pcm_multi_hwptr_update()
by GitHub issues - opened 21 Mar '22

21 Mar '22

alsa-project/alsa-lib issue #217 was opened from infmagic2047: ## Symptom Using the following configuration with plugin `type multi`, `snd_pcm_avail()` may return huge values. ``` pcm.combined { type multi; slaves.a.pcm "dmix:CARD=0"; slaves.a.channels 2; slaves.b.pcm "dmix:CARD=1"; slaves.b.channels 2; bindings.0.slave a; bindings.0.channel 0; bindings.1.slave a; bindings.1.channel 1; bindings.2.slave b; bindings.2.channel 0; bindings.3.slave b; bindings.3.channel 1; } ``` The problem still occurs even when I set both slaves to `dmix:CARD=0`, so use this to reproduce the issue if you don't have multiple output devices. It can be verified with `aplay --test-position -D plug:combined /dev/urandom`. The output looks like this: ``` Playing raw data '/dev/urandom' : Unsigned 8 bit, Rate 8000 Hz, Mono Suspicious buffer position (1 total): avail = 765611936652984468, delay = 2582, buffer = 2730 Suspicious buffer position (2 total): avail = 762797186885877738, delay = 2752, buffer = 2730 Suspicious buffer position (3 total): avail = 759982437118771178, delay = 2752, buffer = 2730 Suspicious buffer position (4 total): avail = 757167687351664448, delay = 2922, buffer = 2730 Suspicious buffer position (5 total): avail = 754352937584557888, delay = 2922, buffer = 2730 Suspicious buffer position (6 total): avail = 751538187817451158, delay = 3092, buffer = 2730 Suspicious buffer position (7 total): avail = 748723438050344598, delay = 3092, buffer = 2730 Suspicious buffer position (8 total): avail = 745908688283237868, delay = 3262, buffer = 2730 Suspicious buffer position (9 total): avail = 743093938516131308, delay = 3262, buffer = 2730 Suspicious buffer position (10 total): avail = 740279188749024578, delay = 3432, buffer = 2730 ``` I'm using alsa-lib-1.2.6.1 on Gentoo Linux, kernel version is 5.16.15. ## Cause For `type multi` plugins, `snd_pcm_multi_status()` returns the hwptr of its master_slave, while `snd_pcm_multi_hwptr_update()` sets the hwptr based on all slaves. They are inconsistent, and can lead to problems for plugins in upper levels. In this particular case, there is a `type rate` plugin on top of `type multi`. It requires the underlying hwptr to be monotonic, and may either read the hwptr directly (in `snd_pcm_rate_sync_hwptr()`) or use the value from status (in `snd_pcm_rate_status()`). The inconsistency can cause hwptr to decrease, breaking the code of `type rate`. ## Attempted solution I'm able to fix the problem with the following patch, and haven't run into any problems. I'm unfamiliar with the code though, so the patch may be inefficient or incorrect in some way. ``` diff -uNar --no-dereference alsa-lib-1.2.6.1/src/pcm/pcm_multi.c alsa-lib-1.2.6.1-new/src/pcm/pcm_multi.c --- alsa-lib-1.2.6.1/src/pcm/pcm_multi.c 2021-12-09 21:17:59.000000000 +0800 +++ alsa-lib-1.2.6.1-new/src/pcm/pcm_multi.c 2022-03-21 16:20:32.096036522 +0800 @@ -388,11 +388,21 @@ return 0; } +static snd_pcm_sframes_t snd_pcm_multi_avail_update(snd_pcm_t *pcm); static int snd_pcm_multi_status(snd_pcm_t *pcm, snd_pcm_status_t *status) { snd_pcm_multi_t *multi = pcm->private_data; snd_pcm_t *slave = multi->slaves[multi->master_slave].pcm; - return snd_pcm_status(slave, status); + + int err = snd_pcm_status(slave, status); + if (err < 0) + return err; + snd_pcm_sframes_t avail = snd_pcm_multi_avail_update(pcm); + if (avail < 0) + return avail; + status->hw_ptr = *pcm->hw.ptr; + status->avail = avail; + return 0; } static snd_pcm_state_t snd_pcm_multi_state(snd_pcm_t *pcm) ``` Issue URL : https://github.com/alsa-project/alsa-lib/issues/217 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH v2] ASoC: fsl-asoc-card: Fix jack_event() always return 0
by Meng Tang 21 Mar '22

21 Mar '22

Today, hp_jack_event and mic_jack_event always return 0. However, snd_soc_dapm_disable_pin and snd_soc_dapm_enable_pin may return a non-zero value, this will cause the user who calling hp_jack_event and mic_jack_event don't know whether the operation was really successfully. Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> --- sound/soc/fsl/fsl-asoc-card.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 370bc790c6ba..d9a0d4768c4d 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -462,11 +462,9 @@ static int hp_jack_event(struct notifier_block *nb, unsigned long event, if (event & SND_JACK_HEADPHONE) /* Disable speaker if headphone is plugged in */ - snd_soc_dapm_disable_pin(dapm, "Ext Spk"); + return snd_soc_dapm_disable_pin(dapm, "Ext Spk"); else - snd_soc_dapm_enable_pin(dapm, "Ext Spk"); - - return 0; + return snd_soc_dapm_enable_pin(dapm, "Ext Spk"); } static struct notifier_block hp_jack_nb = { @@ -481,11 +479,9 @@ static int mic_jack_event(struct notifier_block *nb, unsigned long event, if (event & SND_JACK_MICROPHONE) /* Disable dmic if microphone is plugged in */ - snd_soc_dapm_disable_pin(dapm, "DMIC"); + return snd_soc_dapm_disable_pin(dapm, "DMIC"); else - snd_soc_dapm_enable_pin(dapm, "DMIC"); - - return 0; + return snd_soc_dapm_enable_pin(dapm, "DMIC"); } static struct notifier_block mic_jack_nb = { -- 2.20.1

4 3

[regression] Headphone output gets unproperly powered down - Mi Notebook Pro 2020 (ALC256) (fwd of b.k.o bug #215484; starting with 5.14.14)
by Thorsten Leemhuis 21 Mar '22

21 Mar '22

Hi, this is your Linux kernel regression tracker speaking. I'm forwarding a regression reported in bugzilla.kernel.org to the list, to make sure all parties interested in this are aware of it. The reporter is CCed. Not CCing the stable list in this case, as 5.14 is EOL already. https://bugzilla.kernel.org/show_bug.cgi?id=215484 > With headphones (or an auxiliary jack) plugged in, the audio output > is fine when anything is playing, but when that's stopped a loud pop > can be heard after some seconds and if the jack is connected to an > external amplifier it gets really noisy. Everything gets back to > normal whenever audio playback is resumed, although with another loud > pop at the start. > > This has been happening since kernel 5.14.14, whereas 5.14.13 is > fine. I suspect it has to do with the ALC256 mute logic implemented > in that version > (https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/sound…) > > OS: Fedora Linux 35 Kernel: 5.16.0-60 Vanilla Hardware: Xiaomi Mi > Notebook Pro Enhanced 2020 (i7 10510U, ALC256) Ciao, Thorsten #regzbot introduced v5.14.13..v5.14.14 #regzbot link: https://bugzilla.kernel.org/show_bug.cgi?id=215484 #regzbot from: Emanuele Melzi <itsbytebites(a)tutanota.com>

2 2

An announcement for kernel-global workqueue users.
by Tetsuo Handa 21 Mar '22

21 Mar '22

Hello. The Linux kernel provides kernel-global WQs (namely, system_wq, system_highpri_wq, system_long_wq, system_unbound_wq, system_freezable_wq, system_power_efficient_wq and system_freezable_power_efficient_wq). But since attempt to flush kernel-global WQs has possibility of deadlock, Tejun Heo thinks that we should stop calling flush_scheduled_work() and flush_workqueue(system_*). Such callers as of Linux 5.17 are listed below. ---------- $ git grep -nF 'flush_scheduled_work()' drivers/acpi/osl.c:1182: * invoke flush_scheduled_work()/acpi_os_wait_events_complete() to flush drivers/acpi/osl.c:1575: flush_scheduled_work(); drivers/block/aoe/aoedev.c:324: flush_scheduled_work(); drivers/block/aoe/aoedev.c:523: flush_scheduled_work(); drivers/crypto/atmel-ecc.c:401: flush_scheduled_work(); drivers/crypto/atmel-sha204a.c:162: flush_scheduled_work(); drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c:2606: flush_scheduled_work(); drivers/gpu/drm/bridge/lontium-lt9611uxc.c:985: flush_scheduled_work(); drivers/gpu/drm/i915/display/intel_display.c:10790: flush_scheduled_work(); drivers/gpu/drm/i915/gt/selftest_execlists.c:87: flush_scheduled_work(); drivers/iio/light/tsl2563.c:811: flush_scheduled_work(); drivers/infiniband/hw/mlx4/cm.c:511: flush_scheduled_work(); drivers/infiniband/hw/mlx4/cm.c:543: flush_scheduled_work(); /* make sure all timers were flushed */ drivers/infiniband/ulp/isert/ib_isert.c:2639: flush_scheduled_work(); drivers/input/mouse/psmouse-smbus.c:320: flush_scheduled_work(); drivers/md/dm.c:229: flush_scheduled_work(); drivers/message/fusion/mptscsih.c:1234: flush_scheduled_work(); drivers/net/phy/phy.c:1060: /* Cannot call flush_scheduled_work() here as desired because drivers/net/usb/lan78xx.c:3240: * can't flush_scheduled_work() until we drop rtnl (later), drivers/net/usb/usbnet.c:853: * can't flush_scheduled_work() until we drop rtnl (later), drivers/net/wireless/ath/ath6kl/usb.c:481: flush_scheduled_work(); drivers/net/wwan/wwan_hwsim.c:537: flush_scheduled_work(); /* Wait deletion works completion */ drivers/nvme/target/configfs.c:1557: flush_scheduled_work(); drivers/nvme/target/rdma.c:1587: flush_scheduled_work(); drivers/nvme/target/rdma.c:2056: flush_scheduled_work(); drivers/nvme/target/tcp.c:1818: flush_scheduled_work(); drivers/nvme/target/tcp.c:1879: flush_scheduled_work(); drivers/nvme/target/tcp.c:1884: flush_scheduled_work(); drivers/platform/surface/surface_acpi_notify.c:863: flush_scheduled_work(); drivers/power/supply/ab8500_btemp.c:975: flush_scheduled_work(); drivers/power/supply/ab8500_chargalg.c:1993: flush_scheduled_work(); drivers/power/supply/ab8500_charger.c:3400: flush_scheduled_work(); drivers/power/supply/ab8500_fg.c:3021: flush_scheduled_work(); drivers/rapidio/devices/tsi721.c:2944: flush_scheduled_work(); drivers/rtc/dev.c:99: flush_scheduled_work(); drivers/scsi/mpt3sas/mpt3sas_scsih.c:12409: flush_scheduled_work(); drivers/scsi/qla2xxx/qla_target.c:1568: flush_scheduled_work(); drivers/staging/olpc_dcon/olpc_dcon.c:386: flush_scheduled_work(); sound/soc/intel/atom/sst/sst.c:363: flush_scheduled_work(); $ git grep -nF 'flush_workqueue(system_' drivers/block/rnbd/rnbd-clt.c:1776: flush_workqueue(system_long_wq); drivers/infiniband/core/device.c:2857: flush_workqueue(system_unbound_wq); include/linux/workqueue.h:592: flush_workqueue(system_wq); ---------- I tried to send a patch that emits a warning when flushing kernel-global WQs is attempted ( https://lkml.kernel.org/r/2efd5461-fccd-f1d9-7138-0a6767cbf5fe@I-love.SAKUR… ). But Linus does not want such patch ( https://lkml.kernel.org/r/CAHk-=whWreGjEQ6yasspzBrNnS7EQiL+SknToWt=SzUh4Xom… ). Steps for converting kernel-global WQs into module's local WQs are shown below. But since an oversight in Step 4 results in breakage, I think that this conversion should be carefully handled by maintainers/developers of each module who are familiar with that module. (This is why I'm sending this mail than sending patches, in order to ask for your cooperation.) ---------- Step 0: Consider if flushing kernel-global WQs is unavoidable. For example, commit 081bdc9fe05bb232 ("RDMA/ib_srp: Fix a deadlock") simply removed flush_workqueue(system_long_wq) call. For another example, schedule_on_each_cpu() does not need to call flush_scheduled_work() because schedule_on_each_cpu() knows the list of all "struct work_struct" instances which need to be flushed using flush_work() call. If flushing kernel-global WQs is still unavoidable, please proceed to the following steps. Step 1: Declare a variable for your module. struct workqueue_struct *my_wq; Step 2: Create a WQ for your module from __init function. The same flags used by corresponding kernel-global WQ can be used when creating the WQ for your module. my_wq = alloc_workqueue("my_wq_name", 0, 0); Step 3: Destroy the WQ created in Step 2 from __exit function (and the error handling path of __init function if __init function may fail after creating the WQ). destroy_workqueue(my_wq); Step 4: Replace e.g. schedule_work() call with corresponding queue_work() call throughout your module which should be handled by the WQ for your module. Step 5: Replace flush_scheduled_work() and flush_workqueue(system_*) calls with flush_workqueue() of the WQ for your module. flush_workqueue(my_wq); ---------- Regards.

1 0

[PATCH 1/2] ASoC: SOF: Prevent NULL dereference in sof_pcm_dai_link_fixup()
by Dan Carpenter 20 Mar '22

20 Mar '22

The "dia" pointer can be NULL, so handle that condition first before storing "dia->private". Fixes: 839e484f9e17 ("ASoC: SOF: make struct snd_sof_dai IPC agnostic") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- sound/soc/sof/pcm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/pcm.c b/sound/soc/sof/pcm.c index 1661b0bc6f12..71f5bce0c4c7 100644 --- a/sound/soc/sof/pcm.c +++ b/sound/soc/sof/pcm.c @@ -702,7 +702,7 @@ int sof_pcm_dai_link_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_pcm_hw_pa struct snd_sof_dai *dai = snd_sof_find_dai(component, (char *)rtd->dai_link->name); struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component); - struct sof_dai_private_data *private = dai->private; + struct sof_dai_private_data *private; struct snd_soc_dpcm *dpcm; /* no topology exists for this BE, try a common configuration */ @@ -727,6 +727,7 @@ int sof_pcm_dai_link_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_pcm_hw_pa /* read format from topology */ snd_mask_none(fmt); + private = dai->private; switch (private->comp_dai->config.frame_fmt) { case SOF_IPC_FRAME_S16_LE: snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); -- 2.20.1

5 6

[PATCH] ASoC: fsl-asoc-card: Fix jack_event() always return 0
by Meng Tang 20 Mar '22

20 Mar '22

Today, hp_jack_event and mic_jack_event always return 0. However, snd_soc_dapm_disable_pin and snd_soc_dapm_enable_pin may return a non-zero value, this will cause the user who calling hp_jack_event and mic_jack_event don't know whether the operation was really successfully. This patch corrects the behavior by properly returning 1 when the value gets updated. Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> --- sound/soc/fsl/fsl-asoc-card.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 370bc790c6ba..f2641c2cb047 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -457,16 +457,18 @@ static int fsl_asoc_card_audmux_init(struct device_node *np, static int hp_jack_event(struct notifier_block *nb, unsigned long event, void *data) { + int ret; + struct snd_soc_jack *jack = (struct snd_soc_jack *)data; struct snd_soc_dapm_context *dapm = &jack->card->dapm; if (event & SND_JACK_HEADPHONE) /* Disable speaker if headphone is plugged in */ - snd_soc_dapm_disable_pin(dapm, "Ext Spk"); + ret = snd_soc_dapm_disable_pin(dapm, "Ext Spk"); else - snd_soc_dapm_enable_pin(dapm, "Ext Spk"); + ret = snd_soc_dapm_enable_pin(dapm, "Ext Spk"); - return 0; + return ret; } static struct notifier_block hp_jack_nb = { @@ -476,16 +478,18 @@ static struct notifier_block hp_jack_nb = { static int mic_jack_event(struct notifier_block *nb, unsigned long event, void *data) { + int ret; + struct snd_soc_jack *jack = (struct snd_soc_jack *)data; struct snd_soc_dapm_context *dapm = &jack->card->dapm; if (event & SND_JACK_MICROPHONE) /* Disable dmic if microphone is plugged in */ - snd_soc_dapm_disable_pin(dapm, "DMIC"); + ret = snd_soc_dapm_disable_pin(dapm, "DMIC"); else - snd_soc_dapm_enable_pin(dapm, "DMIC"); + ret = snd_soc_dapm_enable_pin(dapm, "DMIC"); - return 0; + return ret; } static struct notifier_block mic_jack_nb = { -- 2.20.1

3 2

[linux-next:master] BUILD REGRESSION 6d72dda014a4753974eb08950089ddf71fec4f60
by kernel test robot 19 Mar '22

19 Mar '22

tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master branch HEAD: 6d72dda014a4753974eb08950089ddf71fec4f60 Add linux-next specific files for 20220318 Error/Warning reports: https://lore.kernel.org/linux-doc/202202240704.pQD40A9L-lkp@intel.com https://lore.kernel.org/linux-doc/202202240705.t3QbMnlt-lkp@intel.com https://lore.kernel.org/linux-doc/202203180707.vLUjjmqY-lkp@intel.com https://lore.kernel.org/linux-media/202203160306.SfWO9QWV-lkp@intel.com https://lore.kernel.org/linux-media/202203182100.fSdmSXzo-lkp@intel.com https://lore.kernel.org/linux-media/202203182127.ZeZX6m5Y-lkp@intel.com https://lore.kernel.org/llvm/202202241039.g8GKEE4O-lkp@intel.com https://lore.kernel.org/llvm/202203110903.3xDyTUVl-lkp@intel.com https://lore.kernel.org/llvm/202203180453.7LxvqwzJ-lkp@intel.com Error/Warning: Documentation/driver-api/nvdimm/nvdimm.rst:146: (SEVERE/4) Title level inconsistent: arch/arm/kernel/ftrace.c:229:6: warning: no previous prototype for function 'prepare_ftrace_return' [-Wmissing-prototypes] drivers/media/platform/renesas/renesas-ceu.c:1609:30: warning: unused variable 'ceu_data_rz' [-Wunused-const-variable] drivers/media/platform/samsung/exynos4-is/fimc-isp-video.h:35:6: warning: no previous prototype for 'fimc_isp_video_device_unregister' [-Wmissing-prototypes] drivers/media/platform/samsung/s5p-jpeg/jpeg-core.c:3126:34: warning: unused variable 'samsung_jpeg_match' [-Wunused-const-variable] drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c:1175:34: warning: unused variable 'c8sectpfe_match' [-Wunused-const-variable] drivers/spi/spi-amd.c:296:21: warning: cast to smaller integer type 'enum amd_spi_versions' from 'const void *' [-Wvoid-pointer-to-enum-cast] fs/btrfs/ordered-data.c:168: warning: expecting prototype for Add an ordered extent to the per(). Prototype was for btrfs_add_ordered_extent() instead fs/btrfs/tree-log.c:6934: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Unverified Error/Warning (likely false positive, please contact us if interested): FAILED: load BTF from vmlinux: No such file or directory Makefile:677: arch/nds32/Makefile: No such file or directory arch/Kconfig:10: can't open file "arch/nds32/Kconfig" arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' forming offset [40, 2051] is out of the bounds [0, 40] of object 'tag_buf' with type 'unsigned char[40]' [-Warray-bounds] arch/arm/kernel/unwind.c:483:17: warning: Assigned value is garbage or undefined [clang-analyzer-core.uninitialized.Assign] arch/m68k/kernel/machine_kexec.c:55: undefined reference to `m68k_mmutype' arch/m68k/kernel/time.c:105: undefined reference to `mach_get_rtc_pll' arch/riscv/kernel/cacheinfo.c:189:1: internal compiler error: Segmentation fault arch/riscv/kernel/crash_dump.c:46:1: internal compiler error: Segmentation fault arch/riscv/kernel/patch.c:133:1: internal compiler error: Segmentation fault arch/riscv/kernel/signal.c:321:1: internal compiler error: Segmentation fault arch/riscv/mm/extable.c:71:1: internal compiler error: Segmentation fault arch/riscv/mm/physaddr.c:35:1: internal compiler error: Segmentation fault arch/s390/kernel/machine_kexec.c:57:9: warning: 'memcpy' offset [0, 511] is out of the bounds [0, 0] [-Warray-bounds] arch/sh/kernel/machvec.c:105:33: warning: array subscript 'struct sh_machine_vector[0]' is partly outside array bounds of 'long int[1]' [-Warray-bounds] block/blk-mq-rdma.c:44:1: internal compiler error: Segmentation fault block/blk-zoned.c:648:1: internal compiler error: Segmentation fault block/sed-opal.c:2695:1: internal compiler error: Segmentation fault crypto/acompress.c:198:1: internal compiler error: Segmentation fault crypto/aead.c:303:1: internal compiler error: Segmentation fault crypto/ahash.c:660:1: internal compiler error: Segmentation fault crypto/akcipher.c:158:1: internal compiler error: Segmentation fault crypto/api.c:645:1: internal compiler error: Segmentation fault crypto/asymmetric_keys/public_key.c:412:1: internal compiler error: Segmentation fault crypto/dh.c:280:1: internal compiler error: Segmentation fault crypto/ecc.c:1668:1: internal compiler error: Segmentation fault crypto/geniv.c:163:1: internal compiler error: Segmentation fault crypto/gf128mul.c:416:1: internal compiler error: Segmentation fault crypto/kpp.c:115:1: internal compiler error: Segmentation fault crypto/rng.c:228:1: internal compiler error: Segmentation fault crypto/scompress.c:305:1: internal compiler error: Segmentation fault crypto/shash.c:627:1: internal compiler error: Segmentation fault crypto/skcipher.c:984:1: internal compiler error: Segmentation fault drivers/base/map.c:154:1: internal compiler error: Segmentation fault drivers/base/power/domain_governor.c:406:1: internal compiler error: Segmentation fault drivers/base/power/sysfs.c:838:1: internal compiler error: Segmentation fault drivers/base/power/wakeirq.c:405:1: internal compiler error: Segmentation fault drivers/base/regmap/regcache-flat.c:83:1: internal compiler error: Segmentation fault drivers/base/regmap/regcache-rbtree.c:553:1: internal compiler error: Segmentation fault drivers/base/regmap/regcache.c:785:1: internal compiler error: Segmentation fault drivers/base/regmap/regmap-debugfs.c:692:1: internal compiler error: Segmentation fault drivers/base/regmap/regmap-mmio.c:453:1: internal compiler error: Segmentation fault drivers/base/regmap/regmap-sdw-mbq.c:101:1: internal compiler error: Segmentation fault drivers/base/regmap/regmap-slimbus.c:71:1: internal compiler error: Segmentation fault drivers/base/syscore.c:128:1: internal compiler error: Segmentation fault drivers/char/ipmi/ipmi_bt_sm.c:696:1: internal compiler error: Segmentation fault drivers/char/ipmi/ipmi_kcs_sm.c:536:1: internal compiler error: Segmentation fault drivers/char/ipmi/ipmi_plat_data.c:124:1: internal compiler error: Segmentation fault drivers/char/ipmi/ipmi_si_hotmod.c:237:1: internal compiler error: Segmentation fault drivers/char/ipmi/ipmi_si_mem_io.c:146:1: internal compiler error: Segmentation fault drivers/char/ipmi/ipmi_si_port_io.c:114:1: internal compiler error: Segmentation fault drivers/char/ipmi/ipmi_smic_sm.c:585:1: internal compiler error: Segmentation fault drivers/char/tpm/eventlog/efi.c:124:1: internal compiler error: Segmentation fault drivers/clk/clk-composite.c:487:1: internal compiler error: Segmentation fault drivers/clk/clk-fractional-divider.c:259:1: internal compiler error: Segmentation fault drivers/clk/imx/clk-pll14xx.c:166:2: warning: Value stored to 'pll_div_ctl1' is never read [clang-analyzer-deadcode.DeadStores] drivers/comedi/comedi_buf.c:691:1: internal compiler error: Segmentation fault drivers/comedi/drivers.c:1183:1: internal compiler error: Segmentation fault drivers/comedi/range.c:131:1: internal compiler error: Segmentation fault drivers/crypto/ccree/cc_aead.c:2664:1: internal compiler error: Segmentation fault drivers/crypto/ccree/cc_buffer_mgr.c:1383:1: internal compiler error: Segmentation fault drivers/crypto/ccree/cc_cipher.c:1509:1: internal compiler error: Segmentation fault drivers/crypto/ccree/cc_fips.c:154:1: internal compiler error: Segmentation fault drivers/crypto/ccree/cc_hash.c:2315:1: internal compiler error: Segmentation fault drivers/crypto/ccree/cc_pm.c:80:1: internal compiler error: Segmentation fault drivers/crypto/ccree/cc_request_mgr.c:662:1: internal compiler error: Segmentation fault drivers/crypto/ccree/cc_sram_mgr.c:91:1: internal compiler error: Segmentation fault drivers/dma-buf/dma-fence-array.c:207:1: internal compiler error: Segmentation fault drivers/dma-buf/dma-fence-chain.c:258:1: internal compiler error: Segmentation fault drivers/dma-buf/dma-fence.c:960:1: internal compiler error: Segmentation fault drivers/dma-buf/dma-heap.c:324:1: internal compiler error: Segmentation fault drivers/dma/idma64.c:644: undefined reference to `devm_ioremap_resource' drivers/firmware/efi/vars.c:1222:1: internal compiler error: Segmentation fault drivers/firmware/turris-mox-rwtm.c:146:1: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/gpio/gpio-max730x.c:236:1: internal compiler error: Segmentation fault drivers/gpio/gpiolib-of.c:1057:1: internal compiler error: Segmentation fault drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1633:6: warning: no previous prototype for 'is_timing_changed' [-Wmissing-prototypes] drivers/hid/hid-cmedia.c:246:1: internal compiler error: Segmentation fault drivers/hid/hid-core.c:1665:30: warning: Although the value stored to 'field' is used in the enclosing expression, the value is never actually read from 'field' [clang-analyzer-deadcode.DeadStores] drivers/hid/hid-debug.c:1269:1: internal compiler error: Segmentation fault drivers/hid/hid-picolcd_debugfs.c:884:1: internal compiler error: Segmentation fault drivers/hid/hid-picolcd_fb.c:605:1: internal compiler error: Segmentation fault drivers/hid/hid-picolcd_leds.c:161:1: internal compiler error: Segmentation fault drivers/hid/hid-roccat-common.c:175:1: internal compiler error: Segmentation fault drivers/hid/hid-uclogic-params.c:1140:1: internal compiler error: Segmentation fault drivers/hid/hid-uclogic-rdesc.c:862:1: internal compiler error: Segmentation fault drivers/hid/usbhid/hiddev.c:945:1: internal compiler error: Segmentation fault drivers/hwmon/nsa320-hwmon.c:114:9: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/iio/frequency/admv1014.c:703:22: sparse: sparse: dubious: x & !y drivers/infiniband/core/addr.c:890:1: internal compiler error: Segmentation fault drivers/infiniband/core/agent.c:221:1: internal compiler error: Segmentation fault drivers/infiniband/core/cache.c:1675:1: internal compiler error: Segmentation fault drivers/infiniband/core/cm_trace.c:16: internal compiler error: Segmentation fault drivers/infiniband/core/counters.c:669:1: internal compiler error: Segmentation fault drivers/infiniband/core/cq.c:508:1: internal compiler error: Segmentation fault drivers/infiniband/core/ib_core_uverbs.c:367:1: internal compiler error: Segmentation fault drivers/infiniband/core/iwpm_msg.c:846:1: internal compiler error: Segmentation fault drivers/infiniband/core/iwpm_util.c:793:1: internal compiler error: Segmentation fault drivers/infiniband/core/lag.c:138:1: internal compiler error: Segmentation fault drivers/infiniband/core/mad_rmpp.c:960:1: internal compiler error: Segmentation fault drivers/infiniband/core/mr_pool.c:82:1: internal compiler error: Segmentation fault drivers/infiniband/core/multicast.c:906:1: internal compiler error: Segmentation fault drivers/infiniband/core/netlink.c:331:1: internal compiler error: Segmentation fault drivers/infiniband/core/packer.c:201:1: internal compiler error: Segmentation fault drivers/infiniband/core/rdma_core.c:1015:1: internal compiler error: Segmentation fault drivers/infiniband/core/restrack.c:355:1: internal compiler error: Segmentation fault drivers/infiniband/core/rw.c:760:1: internal compiler error: Segmentation fault drivers/infiniband/core/sa_query.c:2269:1: internal compiler error: Segmentation fault drivers/infiniband/core/smi.c:338:1: internal compiler error: Segmentation fault drivers/infiniband/core/sysfs.c:1475:1: internal compiler error: Segmentation fault drivers/infiniband/core/trace.c:13: internal compiler error: Segmentation fault drivers/infiniband/core/ud_header.c:547:1: internal compiler error: Segmentation fault drivers/infiniband/core/umem.c:317:1: internal compiler error: Segmentation fault drivers/infiniband/core/umem_dmabuf.c:231:1: internal compiler error: Segmentation fault drivers/infiniband/core/umem_odp.c:517:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_cmd.c:4044:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_ioctl.c:829:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_marshall.c:215:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types.c:269:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_async_fd.c:79:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_counters.c:161:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_cq.c:222:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_device.c:503:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_dm.c:116:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_flow_action.c:447:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_mr.c:385:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_qp.c:380:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_srq.c:234:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_std_types_wq.c:194:1: internal compiler error: Segmentation fault drivers/infiniband/core/uverbs_uapi.c:734:1: internal compiler error: Segmentation fault drivers/infiniband/core/verbs.c:3030:1: internal compiler error: Segmentation fault drivers/infiniband/sw/siw/siw_cm.c:1956:1: internal compiler error: Segmentation fault drivers/infiniband/sw/siw/siw_cq.c:102:1: internal compiler error: Segmentation fault drivers/infiniband/sw/siw/siw_mem.c:449:1: internal compiler error: Segmentation fault drivers/infiniband/sw/siw/siw_qp.c:1347:1: internal compiler error: Segmentation fault drivers/infiniband/sw/siw/siw_qp_tx.c:1279:1: internal compiler error: Segmentation fault drivers/infiniband/sw/siw/siw_verbs.c:1854:1: internal compiler error: Segmentation fault drivers/input/input-poller.c:222:1: internal compiler error: Segmentation fault drivers/input/matrix-keymap.c:202:1: internal compiler error: Segmentation fault drivers/input/misc/adxl34x.c:911:1: internal compiler error: Segmentation fault drivers/input/misc/cma3000_d0x.c:388:1: internal compiler error: Segmentation fault drivers/input/rmi4/rmi_2d_sensor.c:330:1: internal compiler error: Segmentation fault drivers/input/rmi4/rmi_f01.c:729:1: internal compiler error: Segmentation fault drivers/input/rmi4/rmi_f03.c:328:1: internal compiler error: Segmentation fault drivers/input/rmi4/rmi_f30.c:405:1: internal compiler error: Segmentation fault drivers/input/rmi4/rmi_f54.c:758:1: internal compiler error: Segmentation fault drivers/input/rmi4/rmi_f55.c:128:1: internal compiler error: Segmentation fault drivers/input/serio/ps2-gpio.c:223:4: warning: Value stored to 'rxflags' is never read [clang-analyzer-deadcode.DeadStores] drivers/input/touchscreen.c:207:1: internal compiler error: Segmentation fault drivers/iommu/of_iommu.c:174:1: internal compiler error: Segmentation fault drivers/leds/leds-ti-lmu-common.c:153:1: internal compiler error: Segmentation fault drivers/media/common/videobuf2/frame_vector.c:235:1: internal compiler error: Segmentation fault drivers/media/common/videobuf2/vb2-trace.c:10:1: internal compiler error: Segmentation fault drivers/media/common/videobuf2/videobuf2-dma-contig.c:872:1: internal compiler error: Segmentation fault drivers/media/common/videobuf2/videobuf2-dma-sg.c:680:1: internal compiler error: Segmentation fault drivers/media/common/videobuf2/videobuf2-memops.c:129:1: internal compiler error: Segmentation fault drivers/media/common/videobuf2/videobuf2-vmalloc.c:449:1: internal compiler error: Segmentation fault drivers/media/platform/chips-media/coda-bit.c:1127:2: warning: Value stored to 'value' is never read [clang-analyzer-deadcode.DeadStores] drivers/media/platform/chips-media/coda-common.c:478:38: warning: Array access (from variable 'formats') results in a null pointer dereference [clang-analyzer-core.NullDereference] drivers/media/platform/st/stm32/dma2d/dma2d-hw.c:109:1: internal compiler error: in extract_insn, at recog.c:2770 drivers/media/platform/xilinx/xilinx-dma.c:760:1: internal compiler error: Segmentation fault drivers/media/radio/tea575x.c:577:1: internal compiler error: Segmentation fault drivers/media/usb/cpia2/cpia2_core.c:2434:1: internal compiler error: Segmentation fault drivers/media/usb/cpia2/cpia2_usb.c:966:1: internal compiler error: Segmentation fault drivers/media/usb/gspca/autogain_functions.c:165:1: internal compiler error: Segmentation fault drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c:432:1: internal compiler error: Segmentation fault drivers/media/usb/gspca/stv06xx/stv06xx_st6422.c:273:1: internal compiler error: Segmentation fault drivers/media/usb/pwc/pwc-ctrl.c:543:1: internal compiler error: Segmentation fault drivers/media/usb/pwc/pwc-dec23.c:678:1: internal compiler error: Segmentation fault drivers/media/usb/pwc/pwc-uncompress.c:92:1: internal compiler error: Segmentation fault drivers/media/usb/pwc/pwc-v4l.c:1033:1: internal compiler error: Segmentation fault drivers/media/usb/stkwebcam/stk-sensor.c:586:1: internal compiler error: Segmentation fault drivers/media/usb/uvc/uvc_ctrl.c:2529:1: internal compiler error: Segmentation fault drivers/media/usb/uvc/uvc_debugfs.c:105:1: internal compiler error: Segmentation fault drivers/media/usb/uvc/uvc_entity.c:161:1: internal compiler error: Segmentation fault drivers/media/usb/uvc/uvc_isight.c:135:1: internal compiler error: Segmentation fault drivers/media/usb/uvc/uvc_metadata.c:176:1: internal compiler error: Segmentation fault drivers/media/usb/uvc/uvc_queue.c:515:1: internal compiler error: Segmentation fault drivers/media/usb/uvc/uvc_status.c:313:1: internal compiler error: Segmentation fault drivers/media/usb/uvc/uvc_v4l2.c:1550:1: internal compiler error: Segmentation fault drivers/media/usb/uvc/uvc_video.c:2216:1: internal compiler error: Segmentation fault drivers/memory/brcmstb_dpfe.c:707:10: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/mfd/cs47l35-tables.c:1555:1: internal compiler error: Segmentation fault drivers/mfd/madera-core.c:799:1: internal compiler error: Segmentation fault drivers/mfd/mfd-core.c:440:1: internal compiler error: Segmentation fault drivers/misc/eeprom/eeprom_93cx6.c:372:1: internal compiler error: Segmentation fault drivers/mmc/host/litex_mmc.c:424 litex_mmc_request() error: we previously assumed 'data' could be null (see line 418) drivers/mtd/chips/cfi_cmdset_0020.c:1401:1: internal compiler error: Segmentation fault drivers/mtd/mtdsuper.c:202:1: internal compiler error: Segmentation fault drivers/mtd/nand/bbt.c:131:1: internal compiler error: Segmentation fault drivers/mtd/nand/ecc-mxic.c:523:17: warning: Value stored to 'dev' during its initialization is never read [clang-analyzer-deadcode.DeadStores] drivers/mtd/nand/ecc-mxic.c:595:6: warning: Branch condition evaluates to a garbage value [clang-analyzer-core.uninitialized.Branch] drivers/mtd/nand/ecc-sw-hamming.c:660:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/denali.c:1381:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_base.c:6466:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_hynix.c:735:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_jedec.c:139:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_legacy.c:644:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_macronix.c:334:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_micron.c:599:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_onfi.c:337:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_samsung.c:139:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_timings.c:737:1: internal compiler error: Segmentation fault drivers/mtd/nand/raw/nand_toshiba.c:300:1: internal compiler error: Segmentation fault drivers/net/can/dev/length.c:95:1: internal compiler error: Segmentation fault drivers/net/can/dev/rx-offload.c:402:1: internal compiler error: Segmentation fault drivers/net/can/dev/skb.c:254:1: internal compiler error: Segmentation fault drivers/net/phy/mii_timestamper.c:135:1: internal compiler error: Segmentation fault drivers/net/vxlan/vxlan_core.c:440:34: sparse: sparse: incorrect type in argument 2 (different base types) drivers/nfc/fdp/fdp.c:756:1: internal compiler error: Segmentation fault drivers/nvme/host/zns.c:250:1: internal compiler error: Segmentation fault drivers/nvme/target/zns.c:612:1: internal compiler error: Segmentation fault drivers/nvmem/sunplus-ocotp.c:74:29: sparse: sparse: symbol 'sp_otp_v0' was not declared. Should it be static? drivers/of/kobj.c:165:1: internal compiler error: Segmentation fault drivers/parport/daisy.c:507:1: internal compiler error: Segmentation fault drivers/parport/ieee1284.c:789:1: internal compiler error: Segmentation fault drivers/parport/ieee1284_ops.c:893:1: internal compiler error: Segmentation fault drivers/parport/probe.c:274:1: internal compiler error: Segmentation fault drivers/pci/of.c:635:1: internal compiler error: Segmentation fault drivers/pci/vgaarb.c:213:17: warning: Value stored to 'dev' during its initialization is never read [clang-analyzer-deadcode.DeadStores] drivers/pcmcia/rsrc_mgr.c:70:1: internal compiler error: Segmentation fault drivers/phy/broadcom/phy-brcm-usb.c:233:9: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/phy/phy-core-mipi-dphy.c:164:1: internal compiler error: Segmentation fault drivers/power/supply/ip5xxx_power.c:341 ip5xxx_battery_get_property() error: uninitialized symbol 'raw'. drivers/rtc/sysfs.c:354:1: internal compiler error: Segmentation fault drivers/scsi/iscsi_boot_sysfs.c:554:1: internal compiler error: Segmentation fault drivers/scsi/libiscsi.c:3788:1: internal compiler error: Segmentation fault drivers/scsi/libiscsi_tcp.c:1246:1: internal compiler error: Segmentation fault drivers/scsi/libsas/sas_event.c:228:1: internal compiler error: Segmentation fault drivers/scsi/libsas/sas_task.c:37:1: internal compiler error: Segmentation fault drivers/scsi/lpfc/lpfc_els.c:7983:38: sparse: left side has type unsigned int drivers/scsi/lpfc/lpfc_els.c:7983:38: sparse: right side has type restricted __be32 drivers/scsi/lpfc/lpfc_els.c:7983:38: sparse: sparse: invalid assignment: |= drivers/scsi/lpfc/lpfc_els.c:8504:33: sparse: sparse: incorrect type in assignment (different base types) drivers/scsi/scsi_lib_dma.c:52:1: internal compiler error: Segmentation fault drivers/scsi/ufs/ufs-sysfs.c:1267:1: internal compiler error: Segmentation fault drivers/slimbus/messaging.c:365:1: internal compiler error: Segmentation fault drivers/slimbus/stream.c:477:1: internal compiler error: Segmentation fault drivers/ssb/driver_chipcommon.c:598:1: internal compiler error: Segmentation fault drivers/ssb/scan.c:446:1: internal compiler error: Segmentation fault drivers/staging/greybus/arche-apb-ctrl.c:302:10: warning: Call to function 'sprintf' is insecure as it does not provide bounding of the memory buffer or security checks introduced in the C11 standard. Replace with analogous functions that support length arguments or provides boundary checks such as 'sprintf_s' in case of C11 [clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling] drivers/target/iscsi/iscsi_target_auth.c:531:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_configfs.c:1550:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_datain_values.c:519:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_device.c:57:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_erl0.c:936:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_erl1.c:1239:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_erl2.c:429:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_login.c:1453:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_nego.c:1338:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_nodeattrib.c:253:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_parameters.c:1715:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_seq_pdu_list.c:690:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_stat.c:798:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_tmr.c:841:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_tpg.c:913:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_transport.c:54:1: internal compiler error: Segmentation fault drivers/target/iscsi/iscsi_target_util.c:1371:1: internal compiler error: Segmentation fault drivers/tty/serial/sunplus-uart.c:501:26: sparse: sparse: symbol 'sunplus_console_ports' was not declared. Should it be static? drivers/tty/tty_audit.c:248:1: internal compiler error: Segmentation fault drivers/usb/cdns3/drd.c:495:1: internal compiler error: Segmentation fault drivers/usb/cdns3/host.c:143:1: internal compiler error: Segmentation fault drivers/usb/chipidea/host.c:486:1: internal compiler error: Segmentation fault drivers/usb/core/config.c:1094:1: internal compiler error: Segmentation fault drivers/usb/core/devices.c:593:1: internal compiler error: Segmentation fault drivers/usb/core/endpoint.c:191:1: internal compiler error: Segmentation fault drivers/usb/core/generic.c:324:1: internal compiler error: Segmentation fault drivers/usb/core/port.c:658:1: internal compiler error: Segmentation fault drivers/usb/core/quirks.c:703:1: internal compiler error: Segmentation fault drivers/usb/core/sysfs.c:1263:1: internal compiler error: Segmentation fault drivers/usb/dwc3/debugfs.c:934:1: internal compiler error: Segmentation fault drivers/usb/dwc3/drd.c:660:1: internal compiler error: Segmentation fault drivers/usb/dwc3/ep0.c:1176:1: internal compiler error: Segmentation fault drivers/usb/dwc3/gadget.c:4447:1: internal compiler error: Segmentation fault drivers/usb/gadget/composite.c:2605:1: internal compiler error: Segmentation fault drivers/usb/gadget/config.c:268:1: internal compiler error: Segmentation fault drivers/usb/gadget/epautoconf.c:214:1: internal compiler error: Segmentation fault drivers/usb/gadget/function/f_tcm.c:2333:1: internal compiler error: Segmentation fault drivers/usb/gadget/function/storage_common.c:522:1: internal compiler error: Segmentation fault drivers/usb/gadget/function/u_uac1_legacy.c:306:1: internal compiler error: Segmentation fault drivers/usb/gadget/function/uvc_configfs.c:2462:1: internal compiler error: Segmentation fault drivers/usb/gadget/function/uvc_queue.c:369:1: internal compiler error: Segmentation fault drivers/usb/gadget/function/uvc_v4l2.c:398:1: internal compiler error: Segmentation fault drivers/usb/gadget/function/uvc_video.c:497:1: internal compiler error: Segmentation fault drivers/usb/gadget/functions.c:117:1: internal compiler error: Segmentation fault drivers/usb/gadget/u_f.c:30:1: internal compiler error: Segmentation fault drivers/usb/gadget/udc/snps_udc_core.c:3193:1: internal compiler error: Segmentation fault drivers/usb/gadget/udc/trace.c:11: internal compiler error: Segmentation fault drivers/usb/gadget/usbstring.c:91:1: internal compiler error: Segmentation fault drivers/usb/host/xhci-dbg.c:35:1: internal compiler error: Segmentation fault drivers/usb/isp1760/isp1760-udc.c:1600:1: internal compiler error: Segmentation fault drivers/usb/mon/mon_stat.c:71:1: internal compiler error: Segmentation fault drivers/usb/musb/musb_gadget.c:2094:1: internal compiler error: Segmentation fault drivers/usb/musb/musb_gadget_ep0.c:1058:1: internal compiler error: Segmentation fault drivers/usb/storage/initializers.c:94:1: internal compiler error: Segmentation fault drivers/usb/typec/bus.c:412:1: internal compiler error: Segmentation fault drivers/usb/typec/tcpm/tcpm.c:6457:1: internal compiler error: Segmentation fault drivers/usb/usbip/stub_rx.c:686:1: internal compiler error: Segmentation fault drivers/usb/usbip/stub_tx.c:453:1: internal compiler error: Segmentation fault drivers/usb/usbip/usbip_event.c:196:1: internal compiler error: Segmentation fault drivers/vfio/mdev/vfio_mdev.c:152:1: internal compiler error: Segmentation fault drivers/video/fbdev/core/fb_defio.c:240:1: internal compiler error: Segmentation fault drivers/video/fbdev/core/fbcmap.c:362:1: internal compiler error: Segmentation fault drivers/video/fbdev/core/fbsysfs.c:544:1: internal compiler error: Segmentation fault drivers/virtio/virtio_ring.c:2465:1: internal compiler error: Segmentation fault drivers/w1/w1_family.c:130:1: internal compiler error: Segmentation fault drivers/w1/w1_netlink.c:725:1: internal compiler error: Segmentation fault drivers/watchdog/watchdog_pretimeout.c:216:1: internal compiler error: Segmentation fault fs/afs/addr_list.c:404:1: internal compiler error: Segmentation fault fs/afs/callback.c:228:1: internal compiler error: Segmentation fault fs/afs/cmservice.c:672:1: internal compiler error: Segmentation fault fs/afs/dir_edit.c:493:1: internal compiler error: Segmentation fault fs/afs/dir_silly.c:282:1: internal compiler error: Segmentation fault fs/afs/dynroot.c:393:1: internal compiler error: Segmentation fault fs/afs/file.c:623:1: internal compiler error: Segmentation fault fs/afs/flock.c:877:1: internal compiler error: Segmentation fault fs/afs/fs_operation.c:259:1: internal compiler error: Segmentation fault fs/afs/fs_probe.c:475:1: internal compiler error: Segmentation fault fs/afs/mntpt.c:225:1: internal compiler error: Segmentation fault fs/afs/server_list.c:129:1: internal compiler error: Segmentation fault fs/afs/vl_alias.c:383:1: internal compiler error: Segmentation fault fs/afs/vl_list.c:335:1: internal compiler error: Segmentation fault fs/afs/vl_probe.c:292:1: internal compiler error: Segmentation fault fs/afs/vl_rotate.c:348:1: internal compiler error: Segmentation fault fs/afs/vlclient.c:759:1: internal compiler error: Segmentation fault fs/afs/volume.c:428:1: internal compiler error: Segmentation fault fs/afs/write.c:1034:1: internal compiler error: Segmentation fault fs/afs/xattr.c:363:1: internal compiler error: Segmentation fault fs/autofs/expire.c:620:1: internal compiler error: Segmentation fault fs/autofs/inode.c:385:1: internal compiler error: Segmentation fault fs/autofs/root.c:919:1: internal compiler error: Segmentation fault fs/autofs/symlink.c:26:1: internal compiler error: Segmentation fault fs/autofs/waitq.c:512:1: internal compiler error: Segmentation fault fs/bad_inode.c:252:1: internal compiler error: Segmentation fault fs/btrfs/async-thread.c:419:1: internal compiler error: Segmentation fault fs/btrfs/block-group.c:4082:1: internal compiler error: Segmentation fault fs/btrfs/block-rsv.c:558:1: internal compiler error: Segmentation fault fs/btrfs/ctree.c:4779:1: internal compiler error: Segmentation fault fs/btrfs/delalloc-space.c:486:1: internal compiler error: Segmentation fault fs/btrfs/dev-replace.c:1332:1: internal compiler error: Segmentation fault fs/btrfs/dir-item.c:460:1: internal compiler error: Segmentation fault fs/btrfs/discard.c:723:1: internal compiler error: Segmentation fault fs/btrfs/export.c:281:1: internal compiler error: Segmentation fault fs/btrfs/file-item.c:1285:1: internal compiler error: Segmentation fault fs/btrfs/free-space-cache.c:4116:1: internal compiler error: Segmentation fault fs/btrfs/free-space-tree.c:1603:1: internal compiler error: Segmentation fault fs/btrfs/inode-item.c:749:1: internal compiler error: Segmentation fault fs/btrfs/ioctl.c:5334:1: internal compiler error: Segmentation fault fs/btrfs/locking.c:291:1: internal compiler error: Segmentation fault fs/btrfs/lzo.c:495:1: internal compiler error: Segmentation fault fs/btrfs/orphan.c:58:1: internal compiler error: Segmentation fault fs/btrfs/print-tree.c:410:1: internal compiler error: Segmentation fault fs/btrfs/qgroup.c:4321:1: internal compiler error: Segmentation fault fs/btrfs/raid56.c:2709:1: internal compiler error: Segmentation fault fs/btrfs/reflink.c:911:1: internal compiler error: Segmentation fault fs/btrfs/root-tree.c:545:1: internal compiler error: Segmentation fault fs/btrfs/struct-funcs.c:171:1: internal compiler error: Segmentation fault fs/btrfs/subpage.c:745:1: internal compiler error: Segmentation fault fs/btrfs/transaction.c:2539:1: internal compiler error: Segmentation fault fs/btrfs/tree-defrag.c:132:1: internal compiler error: Segmentation fault fs/btrfs/tree-log.c:6828:1: internal compiler error: Segmentation fault fs/btrfs/tree-mod-log.c:929:1: internal compiler error: Segmentation fault fs/btrfs/ulist.c:276:1: internal compiler error: Segmentation fault fs/btrfs/uuid-tree.c:390:1: internal compiler error: Segmentation fault fs/btrfs/verity.c:813:1: internal compiler error: Segmentation fault fs/btrfs/xattr.c:502:1: internal compiler error: Segmentation fault fs/btrfs/zlib.c:462:1: internal compiler error: Segmentation fault fs/btrfs/zoned.c:2035:1: internal compiler error: Segmentation fault fs/btrfs/zstd.c:706:1: internal compiler error: Segmentation fault fs/ceph/addr.c:2064:1: internal compiler error: Segmentation fault fs/ceph/caps.c:4698:1: internal compiler error: Segmentation fault fs/ceph/ceph_frag.c:23:1: internal compiler error: Segmentation fault fs/ceph/debugfs.c:467:1: internal compiler error: Segmentation fault fs/ceph/dir.c:1994:1: internal compiler error: Segmentation fault fs/ceph/export.c:583:1: internal compiler error: Segmentation fault fs/ceph/file.c:2596:1: internal compiler error: Segmentation fault fs/ceph/inode.c:2438:1: internal compiler error: Segmentation fault fs/ceph/io.c:163:1: internal compiler error: Segmentation fault fs/ceph/ioctl.c:295:1: internal compiler error: Segmentation fault fs/ceph/mdsmap.c:422:1: internal compiler error: Segmentation fault fs/ceph/metric.c:344:1: internal compiler error: Segmentation fault fs/ceph/quota.c:531:1: internal compiler error: Segmentation fault fs/ceph/snap.c:1199:1: internal compiler error: Segmentation fault fs/ceph/xattr.c:1399:1: internal compiler error: Segmentation fault fs/cifs/cifs_debug.c:1066:1: internal compiler error: Segmentation fault fs/cifs/cifs_dfs_ref.c:374:1: internal compiler error: Segmentation fault fs/cifs/cifs_spnego.c:236:1: internal compiler error: Segmentation fault fs/cifs/cifs_swn.c:674:1: internal compiler error: Segmentation fault fs/cifs/cifs_unicode.c:632:1: internal compiler error: Segmentation fault fs/cifs/cifsacl.c:1668:1: internal compiler error: Segmentation fault fs/cifs/cifsencrypt.c:767:1: internal compiler error: Segmentation fault fs/cifs/cifssmb.c:6055:1: internal compiler error: Segmentation fault fs/cifs/connect.c:4498:1: internal compiler error: Segmentation fault fs/cifs/dfs_cache.c:1661:1: internal compiler error: Segmentation fault fs/cifs/dir.c:864:1: internal compiler error: Segmentation fault fs/cifs/file.c:4986:1: internal compiler error: Segmentation fault fs/cifs/fs_context.c:1764:1: internal compiler error: Segmentation fault fs/cifs/inode.c:3014:1: internal compiler error: Segmentation fault fs/cifs/ioctl.c:501:1: internal compiler error: Segmentation fault fs/cifs/link.c:734:1: internal compiler error: Segmentation fault fs/cifs/misc.c:1353:1: internal compiler error: Segmentation fault fs/cifs/netlink.c:89:1: internal compiler error: Segmentation fault fs/cifs/netmisc.c:1021:1: internal compiler error: Segmentation fault fs/cifs/readdir.c:1056:1: internal compiler error: Segmentation fault fs/cifs/sess.c:1718:1: internal compiler error: Segmentation fault fs/cifs/smb1ops.c:1256:1: internal compiler error: Segmentation fault fs/cifs/smb2file.c:287:1: internal compiler error: Segmentation fault fs/cifs/smb2inode.c:750:1: internal compiler error: Segmentation fault fs/cifs/smb2maperror.c:2481:1: internal compiler error: Segmentation fault fs/cifs/smb2misc.c:922:1: internal compiler error: Segmentation fault fs/cifs/smb2ops.c:5947:1: internal compiler error: Segmentation fault fs/cifs/smb2pdu.c:5621:1: internal compiler error: Segmentation fault fs/cifs/smb2transport.c:933:1: internal compiler error: Segmentation fault fs/cifs/smbencrypt.c:91:1: internal compiler error: Segmentation fault fs/cifs/trace.c:9: internal compiler error: Segmentation fault fs/cifs/transport.c:1639:1: internal compiler error: Segmentation fault fs/cifs/unc.c:69:1: internal compiler error: Segmentation fault fs/coda/cache.c:118:1: internal compiler error: Segmentation fault fs/coda/cnode.c:178:1: internal compiler error: Segmentation fault fs/coda/dir.c:595:1: internal compiler error: Segmentation fault fs/coda/file.c:305:1: internal compiler error: Segmentation fault fs/coda/pioctl.c:88:1: internal compiler error: Segmentation fault fs/coda/symlink.c:48:1: internal compiler error: Segmentation fault fs/coda/upcall.c:961:1: internal compiler error: Segmentation fault fs/configfs/file.c:482:1: internal compiler error: Segmentation fault fs/configfs/inode.c:244:1: internal compiler error: Segmentation fault fs/configfs/symlink.c:269:1: internal compiler error: Segmentation fault fs/crypto/bio.c:194:1: internal compiler error: Segmentation fault fs/crypto/fname.c:595:1: internal compiler error: Segmentation fault fs/crypto/hkdf.c:182:1: internal compiler error: Segmentation fault fs/crypto/hooks.c:430:1: internal compiler error: Segmentation fault fs/crypto/keysetup.c:794:1: internal compiler error: Segmentation fault fs/crypto/keysetup_v1.c:319:1: internal compiler error: Segmentation fault fs/crypto/policy.c:818:1: internal compiler error: Segmentation fault fs/d_path.c:448:1: internal compiler error: Segmentation fault fs/dlm/dir.c:306:1: internal compiler error: Segmentation fault fs/dlm/member.c:735:1: internal compiler error: Segmentation fault fs/dlm/midcomms.c:1485:1: internal compiler error: Segmentation fault fs/dlm/plock.c:510:1: internal compiler error: Segmentation fault fs/dlm/rcom.c:675:1: internal compiler error: Segmentation fault fs/dlm/recover.c:956:1: internal compiler error: Segmentation fault fs/dlm/recoverd.c:352:1: internal compiler error: Segmentation fault fs/dlm/requestqueue.c:167:1: internal compiler error: Segmentation fault fs/efivarfs/inode.c:184:1: internal compiler error: Segmentation fault fs/eventfd.c:457:1: internal compiler error: Segmentation fault fs/exportfs/expfs.c:586:1: internal compiler error: Segmentation fault fs/ext2/xattr_user.c:50:1: internal compiler error: Segmentation fault fs/fhandle.c:267:1: internal compiler error: Segmentation fault fs/fs_context.c:717:1: internal compiler error: Segmentation fault fs/fs_pin.c:97:1: internal compiler error: Segmentation fault fs/fs_struct.c:168:1: internal compiler error: Segmentation fault fs/fsopen.c:469:1: internal compiler error: Segmentation fault fs/gfs2/lock_dlm.c:1403:1: internal compiler error: Segmentation fault fs/ioctl.c:879:1: internal compiler error: Segmentation fault fs/kernfs/dir.c:1760:1: internal compiler error: Segmentation fault fs/kernfs/file.c:1022:1: internal compiler error: Segmentation fault fs/kernfs/inode.c:446:1: internal compiler error: Segmentation fault fs/kernfs/symlink.c:153:1: internal compiler error: Segmentation fault fs/namei.c:5051:1: internal compiler error: Segmentation fault fs/nls/nls_base.c:548:1: internal compiler error: Segmentation fault fs/ntfs3/attrib.c:2083:1: internal compiler error: Segmentation fault fs/ntfs3/attrlist.c:457:1: internal compiler error: Segmentation fault fs/ntfs3/dir.c:592:1: internal compiler error: Segmentation fault fs/ntfs3/file.c:1253:1: internal compiler error: Segmentation fault fs/ntfs3/frecord.c:3284:1: internal compiler error: Segmentation fault fs/ntfs3/fslog.c:5213:1: internal compiler error: Segmentation fault fs/ntfs3/fsntfs.c:2506:1: internal compiler error: Segmentation fault fs/ntfs3/index.c:2584:1: internal compiler error: Segmentation fault fs/ntfs3/inode.c:1959:1: internal compiler error: Segmentation fault fs/ntfs3/lib/decompress_common.c:319:1: internal compiler error: Segmentation fault fs/ntfs3/lib/lzx_decompress.c:670:1: internal compiler error: Segmentation fault fs/ntfs3/lznt.c:453:1: internal compiler error: Segmentation fault fs/ntfs3/namei.c:386:1: internal compiler error: Segmentation fault fs/ntfs3/record.c:602:1: internal compiler error: Segmentation fault fs/ntfs3/run.c:1111:1: internal compiler error: Segmentation fault fs/ntfs3/upcase.c:104:1: internal compiler error: Segmentation fault fs/ntfs3/xattr.c:994:1: internal compiler error: Segmentation fault fs/ocfs2/acl.c:409:1: internal compiler error: Segmentation fault fs/ocfs2/alloc.c:7704:1: internal compiler error: Segmentation fault fs/ocfs2/aops.c:2469:1: internal compiler error: Segmentation fault fs/ocfs2/blockcheck.c:604:1: internal compiler error: Segmentation fault fs/ocfs2/buffer_head_io.c:463:1: internal compiler error: Segmentation fault fs/ocfs2/cluster/masklog.c:174:1: internal compiler error: Segmentation fault fs/ocfs2/cluster/netdebug.c:504:1: internal compiler error: Segmentation fault fs/ocfs2/cluster/quorum.c:326:1: internal compiler error: Segmentation fault fs/ocfs2/cluster/tcp.c:2138:1: internal compiler error: Segmentation fault fs/ocfs2/dcache.c:470:1: internal compiler error: Segmentation fault fs/ocfs2/dir.c:4459:1: internal compiler error: Segmentation fault fs/ocfs2/dlmfs/userdlm.c:669:1: internal compiler error: Segmentation fault fs/ocfs2/dlmglue.c:4468:1: internal compiler error: Segmentation fault fs/ocfs2/export.c:283:1: internal compiler error: Segmentation fault fs/ocfs2/extent_map.c:1021:1: internal compiler error: Segmentation fault fs/ocfs2/file.c:2811:1: internal compiler error: Segmentation fault fs/ocfs2/filecheck.c:509:1: internal compiler error: Segmentation fault fs/ocfs2/heartbeat.c:117:1: internal compiler error: Segmentation fault fs/ocfs2/inode.c:1658:1: internal compiler error: Segmentation fault fs/ocfs2/ioctl.c:935:1: internal compiler error: Segmentation fault fs/ocfs2/journal.c:2384:1: internal compiler error: Segmentation fault fs/ocfs2/localalloc.c:1323:1: internal compiler error: Segmentation fault fs/ocfs2/locks.c:124:1: internal compiler error: Segmentation fault fs/ocfs2/mmap.c:176:1: internal compiler error: Segmentation fault fs/ocfs2/move_extents.c:1079:1: internal compiler error: Segmentation fault fs/ocfs2/namei.c:2927:1: internal compiler error: Segmentation fault fs/ocfs2/quota_global.c:1016:1: internal compiler error: Segmentation fault fs/ocfs2/refcounttree.c:4828:1: internal compiler error: Segmentation fault fs/ocfs2/reservations.c:826:1: internal compiler error: Segmentation fault fs/ocfs2/resize.c:582:1: internal compiler error: Segmentation fault fs/ocfs2/slot_map.c:528:1: internal compiler error: Segmentation fault fs/ocfs2/suballoc.c:2866:1: internal compiler error: Segmentation fault fs/ocfs2/symlink.c:93:1: internal compiler error: Segmentation fault fs/ocfs2/sysfile.c:166:1: internal compiler error: Segmentation fault fs/ocfs2/xattr.c:7362:1: internal compiler error: Segmentation fault fs/omfs/bitmap.c:194:1: internal compiler error: Segmentation fault fs/omfs/dir.c:461:1: internal compiler error: Segmentation fault fs/omfs/file.c:383:1: internal compiler error: Segmentation fault fs/open.c:1431:1: internal compiler error: Segmentation fault fs/overlayfs/dir.c:1315:1: internal compiler error: Segmentation fault fs/overlayfs/export.c:872:1: internal compiler error: Segmentation fault fs/overlayfs/inode.c:1196:1: internal compiler error: Segmentation fault fs/overlayfs/namei.c:1191:1: internal compiler error: Segmentation fault fs/overlayfs/readdir.c:1233:1: internal compiler error: Segmentation fault fs/overlayfs/util.c:1062:1: internal compiler error: Segmentation fault fs/pnode.c:602:1: internal compiler error: Segmentation fault fs/posix_acl.c:1018:1: internal compiler error: Segmentation fault fs/pstore/pmsg.c:94:1: internal compiler error: Segmentation fault fs/quota/quota.c:1013:1: internal compiler error: Segmentation fault fs/quota/quota_tree.c:740:1: internal compiler error: Segmentation fault fs/readdir.c:384:1: internal compiler error: Segmentation fault fs/select.c:1123:1: internal compiler error: Segmentation fault fs/smbfs_common/cifs_md4.c:197:1: internal compiler error: Segmentation fault fs/splice.c:1721:1: internal compiler error: Segmentation fault fs/squashfs/decompressor_multi.c:197:1: internal compiler error: Segmentation fault fs/squashfs/zstd_wrapper.c:144:1: internal compiler error: Segmentation fault fs/stack.c:76:1: internal compiler error: Segmentation fault fs/statfs.c:264:1: internal compiler error: Segmentation fault fs/sync.c:382:1: internal compiler error: Segmentation fault fs/unicode/utf8-core.c:217:1: internal compiler error: Segmentation fault fs/utimes.c:164:1: internal compiler error: Segmentation fault fs/xattr.c:1132:1: internal compiler error: Segmentation fault include/asm-generic/io.h:464:31: warning: performing pointer arithmetic on a null pointer has undefined behavior err: false include/linux/cacheflush.h:12:46: warning: 'struct folio' declared inside parameter list will not be visible outside of this definition or declaration include/linux/fortify-string.h:336:4: warning: call to __read_overflow2_field declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] include/linux/fortify-string.h:45:33: warning: '__builtin_memcpy' offset [0, 31] is out of the bounds [0, 0] [-Warray-bounds] include/linux/fortify-string.h:45:33: warning: '__builtin_memcpy' offset [0, 511] is out of the bounds [0, 0] [-Warray-bounds] include/linux/module.h:274:46: internal compiler error: Segmentation fault include/linux/rcupdate.h:414:36: error: dereferencing pointer to incomplete type 'struct css_set' ipc/msgutil.c:184:1: internal compiler error: Segmentation fault kernel/acct.c:602:1: internal compiler error: Segmentation fault kernel/auditsc.c:2997:1: internal compiler error: Segmentation fault kernel/bpf/offload.c:712:1: internal compiler error: Segmentation fault kernel/bpf/reuseport_array.c:351:1: internal compiler error: Segmentation fault kernel/cgroup/freezer.c:323:1: internal compiler error: Segmentation fault kernel/dma/direct.c:631:1: internal compiler error: Segmentation fault kernel/irq/chip.c:1599:1: internal compiler error: Segmentation fault kernel/printk/printk_ringbuffer.c:2082:1: internal compiler error: Segmentation fault kernel/printk/printk_safe.c:52:1: internal compiler error: Segmentation fault kernel/range.c:165:1: internal compiler error: Segmentation fault kernel/rcu/rcu_segcblist.c:633:1: internal compiler error: Segmentation fault kernel/rcu/sync.c:206:1: internal compiler error: Segmentation fault kernel/sched/core.c:5268:20: warning: no previous prototype for function 'task_sched_runtime' [-Wmissing-prototypes] kernel/sched/core.c:8979:6: warning: no previous prototype for 'idle_task_exit' [-Wmissing-prototypes] kernel/sched/core.c:8979:6: warning: no previous prototype for function 'idle_task_exit' [-Wmissing-prototypes] kernel/sched/core.c:9214:5: warning: no previous prototype for 'sched_cpu_activate' [-Wmissing-prototypes] kernel/sched/core.c:9214:5: warning: no previous prototype for function 'sched_cpu_activate' [-Wmissing-prototypes] kernel/sched/core.c:9259:5: warning: no previous prototype for 'sched_cpu_deactivate' [-Wmissing-prototypes] kernel/sched/core.c:9259:5: warning: no previous prototype for function 'sched_cpu_deactivate' [-Wmissing-prototypes] kernel/sched/core.c:9334:5: warning: no previous prototype for 'sched_cpu_starting' [-Wmissing-prototypes] kernel/sched/core.c:9334:5: warning: no previous prototype for function 'sched_cpu_starting' [-Wmissing-prototypes] kernel/sched/core.c:9355:5: warning: no previous prototype for 'sched_cpu_wait_empty' [-Wmissing-prototypes] kernel/sched/core.c:9355:5: warning: no previous prototype for function 'sched_cpu_wait_empty' [-Wmissing-prototypes] kernel/sched/core.c:9397:5: warning: no previous prototype for 'sched_cpu_dying' [-Wmissing-prototypes] kernel/sched/core.c:9397:5: warning: no previous prototype for function 'sched_cpu_dying' [-Wmissing-prototypes] kernel/sched/core.c:9420:13: warning: no previous prototype for function 'sched_init_smp' [-Wmissing-prototypes] kernel/sched/core.c:9453:13: warning: no previous prototype for function 'sched_init_smp' [-Wmissing-prototypes] kernel/sched/core.c:9481:13: warning: no previous prototype for function 'sched_init' [-Wmissing-prototypes] kernel/sched/cpuacct.c:367:1: internal compiler error: Segmentation fault kernel/sched/cputime.c:630:1: internal compiler error: Segmentation fault kernel/sched/deadline.c:2955:1: internal compiler error: Segmentation fault kernel/sched/fair.c:10665:6: warning: no previous prototype for 'nohz_balance_enter_idle' [-Wmissing-prototypes] kernel/sched/fair.c:10665:6: warning: no previous prototype for function 'nohz_balance_enter_idle' [-Wmissing-prototypes] kernel/sched/loadavg.c:245:6: warning: no previous prototype for 'calc_load_nohz_start' [-Wmissing-prototypes] kernel/sched/loadavg.c:245:6: warning: no previous prototype for function 'calc_load_nohz_start' [-Wmissing-prototypes] kernel/sched/loadavg.c:258:6: warning: no previous prototype for 'calc_load_nohz_remote' [-Wmissing-prototypes] kernel/sched/loadavg.c:258:6: warning: no previous prototype for function 'calc_load_nohz_remote' [-Wmissing-prototypes] kernel/sched/loadavg.c:263:6: warning: no previous prototype for 'calc_load_nohz_stop' [-Wmissing-prototypes] kernel/sched/loadavg.c:263:6: warning: no previous prototype for function 'calc_load_nohz_stop' [-Wmissing-prototypes] kernel/sched/membarrier.c:630:1: internal compiler error: Segmentation fault kernel/sched/rt.c:2990:1: internal compiler error: Segmentation fault kernel/sched/sched.h:87:11: fatal error: 'asm/paravirt_api_clock.h' file not found kernel/sched/sched.h:87:11: fatal error: asm/paravirt_api_clock.h: No such file or directory kernel/sys.c:2706:1: internal compiler error: Segmentation fault kernel/task_work.c:169:1: internal compiler error: Segmentation fault kernel/trace/trace_clock.c:158:1: internal compiler error: Segmentation fault kernel/umh.c:564:1: internal compiler error: Segmentation fault lib/asn1_decoder.c:521:1: internal compiler error: Segmentation fault lib/cmdline.c:275:1: internal compiler error: Segmentation fault lib/crc-itu-t.c:66:1: internal compiler error: Segmentation fault lib/crc16.c:64:1: internal compiler error: Segmentation fault lib/crypto/aes.c:356:1: internal compiler error: Segmentation fault lib/crypto/blake2s-generic.c:115:1: internal compiler error: Segmentation fault lib/crypto/poly1305-donna32.c:205:1: internal compiler error: Segmentation fault lib/crypto/poly1305.c:78:1: internal compiler error: Segmentation fault lib/dim/dim.c:83:1: internal compiler error: Segmentation fault lib/dim/net_dim.c:246:1: internal compiler error: Segmentation fault lib/dim/rdma_dim.c:108:1: internal compiler error: Segmentation fault lib/dynamic_queue_limits.c:138:1: internal compiler error: Segmentation fault lib/earlycpio.c:141:1: internal compiler error: Segmentation fault lib/extable.c:118:1: internal compiler error: Segmentation fault lib/fdt.c:3: internal compiler error: Segmentation fault lib/fdt_ro.c:3: internal compiler error: Segmentation fault lib/fdt_rw.c:3: internal compiler error: Segmentation fault lib/fdt_sw.c:3: internal compiler error: Segmentation fault lib/fdt_wip.c:3: internal compiler error: Segmentation fault lib/flex_proportions.c:282:1: internal compiler error: Segmentation fault lib/interval_tree.c:17:1: internal compiler error: Segmentation fault lib/iov_iter.c:2067:1: internal compiler error: Segmentation fault lib/is_single_threaded.c:54:1: internal compiler error: Segmentation fault lib/kunit/assert.c:206:1: internal compiler error: Segmentation fault lib/linear_ranges.c:276:1: internal compiler error: Segmentation fault lib/logic_pio.c:232:1: internal compiler error: Segmentation fault lib/lz4/lz4_compress.c:940:1: internal compiler error: Segmentation fault lib/lz4/lz4_decompress.c:715:1: internal compiler error: Segmentation fault lib/lzo/lzo1x_compress.c:400:1: internal compiler error: Segmentation fault lib/lzo/lzo1x_decompress_safe.c:294:1: internal compiler error: Segmentation fault lib/math/rational.c:111:1: internal compiler error: Segmentation fault lib/mpi/generic_mpih-mul2.c:47:1: internal compiler error: Segmentation fault lib/mpi/generic_mpih-mul3.c:48:1: internal compiler error: Segmentation fault lib/mpi/mpi-div.c:234:1: internal compiler error: Segmentation fault lib/mpi/mpi-mod.c:157:1: internal compiler error: Segmentation fault lib/mpi/mpi-mul.c:91:1: internal compiler error: Segmentation fault lib/mpi/mpih-div.c:517:1: internal compiler error: Segmentation fault lib/mpi/mpih-mul.c:509:1: internal compiler error: Segmentation fault lib/net_utils.c:27:1: internal compiler error: Segmentation fault lib/nlattr.c:1121:1: internal compiler error: Segmentation fault lib/oid_registry.c:199:1: internal compiler error: Segmentation fault lib/plist.c:173:1: internal compiler error: Segmentation fault lib/raid6/int1.c:154:1: internal compiler error: Segmentation fault lib/raid6/int2.c:180:1: internal compiler error: Segmentation fault lib/raid6/int4.c:232:1: internal compiler error: Segmentation fault lib/raid6/int8.c:336:1: internal compiler error: Segmentation fault lib/seq_buf.c:397:1: internal compiler error: Segmentation fault lib/stackinit_kunit.c:259:8: warning: Excessive padding in 'struct test_big_hole' (124 padding bytes, where 60 is optimal). lib/stackinit_kunit.c:339:1: warning: Address of stack memory associated with local variable 'var' is still referred to by the global variable 'fill_start' upon returning to the caller. This will be a dangling reference [clang-analyzer-core.StackAddressEscape] lib/stackinit_kunit.c:339:1: warning: Address of stack memory associated with local variable 'var' is still referred to by the global variable 'target_start' upon returning to the caller. This will be a dangling reference [clang-analyzer-core.StackAddressEscape] lib/stackinit_kunit.c:343:1: warning: Undefined or garbage value returned to caller [clang-analyzer-core.uninitialized.UndefReturn] lib/syscall.c:88:1: internal compiler error: Segmentation fault lib/zlib_deflate/deflate.c:1146:1: internal compiler error: Segmentation fault lib/zlib_deflate/deftree.c:1058:1: internal compiler error: Segmentation fault lib/zlib_inflate/inffast.c:325:1: internal compiler error: Segmentation fault lib/zlib_inflate/inflate.c:814:1: internal compiler error: Segmentation fault lib/zstd/common/entropy_common.c:357:1: internal compiler error: Segmentation fault lib/zstd/common/fse_decompress.c:386:1: internal compiler error: Segmentation fault lib/zstd/compress/fse_compress.c:622:1: internal compiler error: Segmentation fault lib/zstd/compress/hist.c:164:1: internal compiler error: Segmentation fault lib/zstd/compress/huf_compress.c:904:1: internal compiler error: Segmentation fault lib/zstd/compress/zstd_compress.c:5109:1: internal compiler error: Segmentation fault lib/zstd/compress/zstd_compress_literals.c:158:1: internal compiler error: Segmentation fault lib/zstd/compress/zstd_compress_sequences.c:439:1: internal compiler error: Segmentation fault lib/zstd/compress/zstd_compress_superblock.c:852:1: internal compiler error: Segmentation fault lib/zstd/compress/zstd_double_fast.c:519:1: internal compiler error: Segmentation fault lib/zstd/compress/zstd_fast.c:496:1: internal compiler error: Segmentation fault lib/zstd/compress/zstd_lazy.c:1414:1: internal compiler error: Segmentation fault lib/zstd/compress/zstd_ldm.c:686:1: internal compiler error: Segmentation fault lib/zstd/compress/zstd_opt.c:1354:1: internal compiler error: Segmentation fault lib/zstd/decompress/huf_decompress.c:1205:1: internal compiler error: Segmentation fault lib/zstd/decompress/zstd_ddict.c:241:1: internal compiler error: Segmentation fault lib/zstd/decompress/zstd_decompress.c:2085:1: internal compiler error: Segmentation fault lib/zstd/decompress/zstd_decompress_block.c:1540:1: internal compiler error: Segmentation fault m68k-linux-ld: arch/m68k/kernel/machine_kexec.c:56: undefined reference to `m68k_cputype' m68k-linux-ld: arch/m68k/kernel/time.c:110: undefined reference to `mach_set_rtc_pll' make[1]: *** No rule to make target 'arch/nds32/Makefile'. mips64-linux-ld: page_alloc.c:(.init.text+0x1f38): undefined reference to `node_data' mm/folio-compat.c:153:1: internal compiler error: Segmentation fault mm/hmm.c:602:1: internal compiler error: Segmentation fault mm/interval_tree.c:103:1: internal compiler error: Segmentation fault mm/mmu_notifier.c:1120:1: internal compiler error: Segmentation fault mm/ptdump.c:165:1: internal compiler error: Segmentation fault nd_perf.c:(.text+0x158): undefined reference to `perf_pmu_migrate_context' nd_perf.c:(.text+0x226): undefined reference to `perf_pmu_migrate_context' nd_perf.c:(.text+0x4f8): undefined reference to `perf_pmu_register' nd_perf.c:(.text+0x572): undefined reference to `perf_pmu_unregister' nd_perf.c:(.text+0x604): undefined reference to `perf_pmu_register' nd_perf.c:(.text+0x682): undefined reference to `perf_pmu_migrate_context' nd_perf.c:(.text+0x738): undefined reference to `perf_pmu_unregister' net/6lowpan/iphc.c:1313:1: internal compiler error: Segmentation fault net/6lowpan/ndisc.c:233:1: internal compiler error: Segmentation fault net/6lowpan/nhc.c:234:1: internal compiler error: Segmentation fault net/802/garp.c:649:1: internal compiler error: Segmentation fault net/802/mrp.c:935:1: internal compiler error: Segmentation fault net/ax25/ax25_addr.c:303:1: internal compiler error: Segmentation fault net/ax25/ax25_iface.c:214:1: internal compiler error: Segmentation fault net/ax25/ax25_in.c:451:1: internal compiler error: Segmentation fault net/ax25/ax25_ip.c:246:1: internal compiler error: Segmentation fault net/ax25/ax25_out.c:386:1: internal compiler error: Segmentation fault net/ax25/ax25_std_in.c:443:1: internal compiler error: Segmentation fault net/ax25/ax25_std_timer.c:175:1: internal compiler error: Segmentation fault net/ax25/ax25_subr.c:288:1: internal compiler error: Segmentation fault net/ax25/ax25_timer.c:222:1: internal compiler error: Segmentation fault net/bridge/br_if.c:787:1: internal compiler error: Segmentation fault net/bridge/br_switchdev.c:756:1: internal compiler error: Segmentation fault net/caif/cfcnfg.c:612:1: internal compiler error: Segmentation fault net/caif/cfctrl.c:634:1: internal compiler error: Segmentation fault net/caif/cfdbgl.c:55:1: internal compiler error: Segmentation fault net/caif/cfdgml.c:113:1: internal compiler error: Segmentation fault net/caif/cffrml.c:197:1: internal compiler error: Segmentation fault net/caif/cfmuxl.c:267:1: internal compiler error: Segmentation fault net/caif/cfpkt_skbuff.c:382:1: internal compiler error: Segmentation fault net/caif/cfrfml.c:299:1: internal compiler error: Segmentation fault net/caif/cfserl.c:192:1: internal compiler error: Segmentation fault net/caif/cfsrvl.c:220:1: internal compiler error: Segmentation fault net/caif/cfutill.c:104:1: internal compiler error: Segmentation fault net/caif/cfveil.c:101:1: internal compiler error: Segmentation fault net/caif/cfvidl.c:65:1: internal compiler error: Segmentation fault net/can/j1939/transport.c:2195:1: internal compiler error: Segmentation fault net/ceph/armor.c:106:1: internal compiler error: Segmentation fault net/ceph/auth.c:659:1: internal compiler error: Segmentation fault net/ceph/auth_none.c:146:1: internal compiler error: Segmentation fault net/ceph/auth_x.c:1122:1: internal compiler error: Segmentation fault net/ceph/buffer.c:59:1: internal compiler error: Segmentation fault net/ceph/cls_lock_client.c:431:1: internal compiler error: Segmentation fault net/ceph/crush/crush.c:142:1: internal compiler error: Segmentation fault net/ceph/crush/mapper.c:1099:1: internal compiler error: Segmentation fault net/ceph/decode.c:193:1: internal compiler error: Segmentation fault net/ceph/messenger_v1.c:1548:1: internal compiler error: Segmentation fault net/ceph/messenger_v2.c:3581:1: internal compiler error: Segmentation fault net/ceph/mon_client.c:1586:1: internal compiler error: Segmentation fault net/ceph/msgpool.c:94:1: internal compiler error: Segmentation fault net/ceph/osdmap.c:3090:1: internal compiler error: Segmentation fault net/ceph/pagelist.c:171:1: internal compiler error: Segmentation fault net/ceph/pagevec.c:166:1: internal compiler error: Segmentation fault net/ceph/snapshot.c:63:1: internal compiler error: Segmentation fault net/ceph/string_table.c:106:1: internal compiler error: Segmentation fault net/ceph/striper.c:278:1: internal compiler error: Segmentation fault net/core/datagram.c:838:1: internal compiler error: Segmentation fault net/core/dev_addr_lists.c:1048:1: internal compiler error: Segmentation fault net/core/dst.c:355:1: internal compiler error: Segmentation fault net/core/dst_cache.c:183:1: internal compiler error: Segmentation fault net/core/flow_offload.c:597:1: internal compiler error: Segmentation fault net/core/gen_estimator.c:278:1: internal compiler error: Segmentation fault net/core/gen_stats.c:485:1: internal compiler error: Segmentation fault net/core/gro.c:770:1: internal compiler error: Segmentation fault net/core/gro_cells.c:113:1: internal compiler error: Segmentation fault net/core/link_watch.c:279:1: internal compiler error: Segmentation fault net/core/lwtunnel.c:424:1: internal compiler error: Segmentation fault net/core/net-traces.c:63:1: internal compiler error: Segmentation fault net/core/of_net.c:170:1: internal compiler error: Segmentation fault net/core/scm.c:367:1: internal compiler error: Segmentation fault net/core/secure_seq.c:192:1: internal compiler error: Segmentation fault net/core/sock.c:3928:1: internal compiler error: Segmentation fault net/core/sock_reuseport.c:649:1: internal compiler error: Segmentation fault net/core/stream.c:212:1: internal compiler error: Segmentation fault net/core/timestamping.c:71:1: internal compiler error: Segmentation fault net/core/tso.c:97:1: internal compiler error: Segmentation fault net/core/utils.c:486:1: internal compiler error: Segmentation fault net/dccp/ccids/ccid2.c:792:1: internal compiler error: Segmentation fault net/dccp/input.c:739:1: internal compiler error: Segmentation fault net/dccp/output.c:709:1: internal compiler error: Segmentation fault net/dccp/qpolicy.c:136:1: internal compiler error: Segmentation fault net/devres.c:95:1: internal compiler error: Segmentation fault net/dns_resolver/dns_query.c:172:1: internal compiler error: Segmentation fault net/ethtool/bitset.c:831:1: internal compiler error: Segmentation fault net/ethtool/cabletest.c:433:1: internal compiler error: Segmentation fault net/ethtool/channels.c:224:1: internal compiler error: Segmentation fault net/ethtool/coalesce.c:341:1: internal compiler error: Segmentation fault net/ethtool/common.c:596:1: internal compiler error: Segmentation fault net/ethtool/eeprom.c:240:1: internal compiler error: Segmentation fault net/ethtool/features.c:288:1: internal compiler error: Segmentation fault net/ethtool/fec.c:310:1: internal compiler error: Segmentation fault net/ethtool/ioctl.c:3351:1: internal compiler error: Segmentation fault net/ethtool/linkinfo.c:154:1: internal compiler error: Segmentation fault net/ethtool/linkmodes.c:363:1: internal compiler error: Segmentation fault net/ethtool/linkstate.c:182:1: internal compiler error: Segmentation fault net/ethtool/module.c:180:1: internal compiler error: Segmentation fault net/ethtool/pause.c:186:1: internal compiler error: Segmentation fault net/ethtool/privflags.c:201:1: internal compiler error: Segmentation fault net/ethtool/rings.c:201:1: internal compiler error: Segmentation fault net/ethtool/stats.c:412:1: internal compiler error: Segmentation fault net/ethtool/strset.c:480:1: internal compiler error: Segmentation fault net/ethtool/tunnels.c:298:1: internal compiler error: Segmentation fault net/ethtool/wol.c:170:1: internal compiler error: Segmentation fault net/ieee802154/6lowpan/rx.c:323:1: internal compiler error: Segmentation fault net/ieee802154/6lowpan/tx.c:309:1: internal compiler error: Segmentation fault net/ieee802154/header_ops.c:318:1: internal compiler error: Segmentation fault net/ipv4/datagram.c:128:1: internal compiler error: Segmentation fault net/ipv4/fib_semantics.c:2276:1: internal compiler error: Segmentation fault net/ipv4/inet_connection_sock.c:1296:1: internal compiler error: Segmentation fault net/ipv4/inet_timewait_sock.c:302:1: internal compiler error: Segmentation fault net/ipv4/ip_forward.c:175:1: internal compiler error: Segmentation fault net/ipv4/ip_input.c:645:1: internal compiler error: Segmentation fault net/ipv4/ip_options.c:654:1: internal compiler error: Segmentation fault net/ipv4/ip_sockglue.c:1794:1: internal compiler error: Segmentation fault net/ipv4/ip_tunnel.c:1280:1: internal compiler error: Segmentation fault net/ipv4/ipmr_base.c:437:1: internal compiler error: Segmentation fault net/ipv4/metrics.c:92:1: internal compiler error: Segmentation fault net/ipv4/netlink.c:33:1: internal compiler error: Segmentation fault net/ipv4/protocol.c:70:1: internal compiler error: Segmentation fault net/ipv4/syncookies.c:449:1: internal compiler error: Segmentation fault net/ipv4/tcp_fastopen.c:591:1: internal compiler error: Segmentation fault net/ipv4/tcp_input.c:5012:2: warning: Value stored to 'reason' is never read [clang-analyzer-deadcode.DeadStores] net/ipv4/tcp_input.c:6967:1: internal compiler error: Segmentation fault net/ipv4/tcp_minisocks.c:853:1: internal compiler error: Segmentation fault net/ipv4/tcp_rate.c:204:1: internal compiler error: Segmentation fault net/ipv4/tcp_recovery.c:240:1: internal compiler error: Segmentation fault net/ipv4/tcp_timer.c:798:1: internal compiler error: Segmentation fault net/ipv4/tcp_ulp.c:161:1: internal compiler error: Segmentation fault net/ipv4/udp_tunnel_core.c:205:1: internal compiler error: Segmentation fault net/ipv4/xfrm4_input.c:172:1: internal compiler error: Segmentation fault net/ipv6/addrconf_core.c:273:1: internal compiler error: Segmentation fault net/ipv6/datagram.c:1066:1: internal compiler error: Segmentation fault net/ipv6/exthdrs_core.c:280:1: internal compiler error: Segmentation fault net/ipv6/inet6_connection_sock.c:154:1: internal compiler error: Segmentation fault net/ipv6/inet6_hashtables.c:344:1: internal compiler error: Segmentation fault net/ipv6/ip6_checksum.c:137:1: internal compiler error: Segmentation fault net/ipv6/ip6_input.c:573:1: internal compiler error: Segmentation fault net/ipv6/ip6_output.c:2004:1: internal compiler error: Segmentation fault net/ipv6/ip6_udp_tunnel.c:114:1: internal compiler error: Segmentation fault net/ipv6/ipv6_sockglue.c:1509:1: internal compiler error: Segmentation fault net/ipv6/mcast_snoop.c:190:1: internal compiler error: Segmentation fault net/ipv6/output_core.c:165:1: internal compiler error: Segmentation fault net/ipv6/protocol.c:70:1: internal compiler error: Segmentation fault net/ipv6/rpl.c:124:1: internal compiler error: Segmentation fault net/ipv6/syncookies.c:264:1: internal compiler error: Segmentation fault net/ipv6/udp_offload.c:206:1: internal compiler error: Segmentation fault net/ipv6/xfrm6_input.c:255:1: internal compiler error: Segmentation fault net/ipv6/xfrm6_output.c:96:1: internal compiler error: Segmentation fault net/l3mdev/l3mdev.c:310:1: internal compiler error: Segmentation fault net/llc/llc_input.c:227:1: internal compiler error: Segmentation fault net/llc/llc_output.c:74:1: internal compiler error: Segmentation fault net/mac80211/aead_api.c:113:1: internal compiler error: Segmentation fault net/mac80211/aes_cmac.c:92:1: internal compiler error: Segmentation fault net/mac80211/aes_gmac.c:92:1: internal compiler error: Segmentation fault net/mac80211/agg-rx.c:550:1: internal compiler error: Segmentation fault net/mac80211/agg-tx.c:1042:1: internal compiler error: Segmentation fault net/mac80211/airtime.c:711:1: internal compiler error: Segmentation fault net/mac80211/chan.c:1904:1: internal compiler error: Segmentation fault net/mac80211/debugfs.c:720:1: internal compiler error: Segmentation fault net/mac80211/debugfs_key.c:472:1: internal compiler error: Segmentation fault net/mac80211/debugfs_netdev.c:868:1: internal compiler error: Segmentation fault net/mac80211/debugfs_sta.c:1078:1: internal compiler error: Segmentation fault net/mac80211/driver-ops.c:346:1: internal compiler error: Segmentation fault net/mac80211/ethtool.c:246:1: internal compiler error: Segmentation fault net/mac80211/fils_aead.c:333:1: internal compiler error: Segmentation fault net/mac80211/he.c:237:1: internal compiler error: Segmentation fault net/mac80211/ht.c:569:1: internal compiler error: Segmentation fault net/mac80211/iface.c:2289:1: internal compiler error: Segmentation fault net/mac80211/key.c:1358:1: internal compiler error: Segmentation fault net/mac80211/michael.c:83:1: internal compiler error: Segmentation fault net/mac80211/ocb.c:245:1: internal compiler error: Segmentation fault net/mac80211/offchannel.c:992:1: internal compiler error: Segmentation fault net/mac80211/pm.c:201:1: internal compiler error: Segmentation fault net/mac80211/rate.c:1010:1: internal compiler error: Segmentation fault net/mac80211/rx.c:5023:1: internal compiler error: Segmentation fault net/mac80211/s1g.c:198:1: internal compiler error: Segmentation fault net/mac80211/scan.c:1448:1: internal compiler error: Segmentation fault net/mac80211/spectmgmt.c:249:1: internal compiler error: Segmentation fault net/mac80211/sta_info.c:2605:1: internal compiler error: Segmentation fault net/mac80211/status.c:1286:1: internal compiler error: Segmentation fault net/mac80211/tdls.c:2008:1: internal compiler error: Segmentation fault net/mac80211/tkip.c:323:1: internal compiler error: Segmentation fault net/mac80211/trace.c:13: internal compiler error: Segmentation fault net/mac80211/tx.c:5811:1: internal compiler error: Segmentation fault net/mac80211/util.c:4635:1: internal compiler error: Segmentation fault net/mac80211/vht.c:697:1: internal compiler error: Segmentation fault net/mac80211/wep.c:306:1: internal compiler error: Segmentation fault net/mac80211/wme.c:290:1: internal compiler error: Segmentation fault net/mac80211/wpa.c:1272:1: internal compiler error: Segmentation fault net/ncsi/ncsi-aen.c:245:1: internal compiler error: Segmentation fault net/ncsi/ncsi-cmd.c:406:1: internal compiler error: Segmentation fault net/ncsi/ncsi-rsp.c:1259:1: internal compiler error: Segmentation fault net/netlabel/netlabel_addrlist.c:367:1: internal compiler error: Segmentation fault net/netrom/nr_dev.c:178:1: internal compiler error: Segmentation fault net/netrom/nr_in.c:301:1: internal compiler error: Segmentation fault net/netrom/nr_out.c:270:1: internal compiler error: Segmentation fault net/netrom/nr_route.c:983:1: internal compiler error: Segmentation fault net/netrom/nr_subr.c:278:1: internal compiler error: Segmentation fault net/netrom/nr_timer.c:247:1: internal compiler error: Segmentation fault net/nfc/hci/command.c:344:1: internal compiler error: Segmentation fault net/nfc/hci/hcp.c:138:1: internal compiler error: Segmentation fault net/nfc/hci/llc_nop.c:86:1: internal compiler error: Segmentation fault net/nfc/hci/llc_shdlc.c:818:1: internal compiler error: Segmentation fault net/openvswitch/actions.c:1623:1: internal compiler error: Segmentation fault net/openvswitch/dp_notify.c:86:1: internal compiler error: Segmentation fault net/openvswitch/flow.c:974:1: internal compiler error: Segmentation fault net/openvswitch/flow_netlink.c:3667:1: internal compiler error: Segmentation fault net/openvswitch/flow_table.c:1222:1: internal compiler error: Segmentation fault net/openvswitch/meter.c:765:1: internal compiler error: Segmentation fault net/openvswitch/openvswitch_trace.c:9: internal compiler error: Segmentation fault net/openvswitch/vport-internal_dev.c:254:1: internal compiler error: Segmentation fault net/openvswitch/vport.c:516:1: internal compiler error: Segmentation fault net/rds/af_rds.c:963:1: internal compiler error: Segmentation fault net/rds/bind.c:283:1: internal compiler error: Segmentation fault net/rds/cong.c:428:1: internal compiler error: Segmentation fault net/rds/connection.c:948:1: internal compiler error: Segmentation fault net/rds/info.c:242:1: internal compiler error: Segmentation fault net/rds/message.c:522:1: internal compiler error: Segmentation fault net/rds/page.c:167:1: internal compiler error: Segmentation fault net/rds/rdma.c:958:1: internal compiler error: Segmentation fault net/rds/recv.c:830:1: internal compiler error: Segmentation fault net/rds/send.c:1515:1: internal compiler error: Segmentation fault net/rds/threads.c:311:1: internal compiler error: Segmentation fault net/rds/transport.c:169:1: internal compiler error: Segmentation fault net/rxrpc/call_accept.c:491:1: internal compiler error: Segmentation fault net/rxrpc/call_event.c:446:1: internal compiler error: Segmentation fault net/rxrpc/call_object.c:703:1: internal compiler error: Segmentation fault net/rxrpc/conn_client.c:1121:1: internal compiler error: Segmentation fault net/rxrpc/conn_event.c:499:1: internal compiler error: Segmentation fault net/rxrpc/conn_object.c:486:1: internal compiler error: Segmentation fault net/rxrpc/conn_service.c:203:1: internal compiler error: Segmentation fault net/rxrpc/input.c:1468:1: internal compiler error: Segmentation fault net/rxrpc/insecure.c:102:1: internal compiler error: Segmentation fault net/rxrpc/key.c:695:1: internal compiler error: Segmentation fault net/rxrpc/local_event.c:115:1: internal compiler error: Segmentation fault net/rxrpc/local_object.c:467:1: internal compiler error: Segmentation fault net/rxrpc/output.c:675:1: internal compiler error: Segmentation fault net/rxrpc/peer_event.c:417:1: internal compiler error: Segmentation fault net/rxrpc/peer_object.c:526:1: internal compiler error: Segmentation fault net/rxrpc/recvmsg.c:818:1: internal compiler error: Segmentation fault net/rxrpc/rtt.c:195:1: internal compiler error: Segmentation fault net/rxrpc/sendmsg.c:860:1: internal compiler error: Segmentation fault net/rxrpc/server_key.c:143:1: internal compiler error: Segmentation fault net/rxrpc/skbuff.c:96:1: internal compiler error: Segmentation fault net/rxrpc/utils.c:44:1: internal compiler error: Segmentation fault net/sched/sch_fifo.c:271:1: internal compiler error: Segmentation fault net/sched/sch_frag.c:152:1: internal compiler error: Segmentation fault net/sched/sch_generic.c:1607:1: internal compiler error: Segmentation fault net/sctp/associola.c:1731:1: internal compiler error: Segmentation fault net/sctp/auth.c:1079:1: internal compiler error: Segmentation fault net/sctp/bind_addr.c:569:1: internal compiler error: Segmentation fault net/sctp/chunk.c:353:1: internal compiler error: Segmentation fault net/sctp/endpointola.c:417:1: internal compiler error: Segmentation fault net/sctp/input.c:1347:1: internal compiler error: Segmentation fault net/sctp/inqueue.c:237:1: internal compiler error: Segmentation fault net/sctp/ipv6.c:1217:1: internal compiler error: Segmentation fault net/sctp/output.c:864:1: internal compiler error: Segmentation fault net/sctp/outqueue.c:1915:1: internal compiler error: Segmentation fault net/sctp/sm_make_chunk.c:3937:1: internal compiler error: Segmentation fault net/sctp/sm_sideeffect.c:1818:1: internal compiler error: Segmentation fault net/sctp/sm_statefuns.c:6677:1: internal compiler error: Segmentation fault net/sctp/socket.c:9707:1: internal compiler error: Segmentation fault net/sctp/stream.c:1089:1: internal compiler error: Segmentation fault net/sctp/stream_interleave.c:1360:1: internal compiler error: Segmentation fault net/sctp/stream_sched.c:273:1: internal compiler error: Segmentation fault net/sctp/stream_sched_prio.c:337:1: internal compiler error: Segmentation fault net/sctp/stream_sched_rr.c:191:1: internal compiler error: Segmentation fault net/sctp/transport.c:853:1: internal compiler error: Segmentation fault net/sctp/tsnmap.c:364:1: internal compiler error: Segmentation fault net/sctp/ulpevent.c:1190:1: internal compiler error: Segmentation fault net/sctp/ulpqueue.c:1136:1: internal compiler error: Segmentation fault net/switchdev/switchdev.c:754:1: internal compiler error: Segmentation fault net/tls/tls_device_fallback.c:480:1: internal compiler error: Segmentation fault net/tls/tls_sw.c:2599:1: internal compiler error: Segmentation fault net/tls/trace.c:9: internal compiler error: Segmentation fault net/unix/scm.c:154:1: internal compiler error: Segmentation fault net/vmw_vsock/af_vsock_tap.c:110:1: internal compiler error: Segmentation fault net/vmw_vsock/virtio_transport_common.c:1352:1: internal compiler error: Segmentation fault net/vmw_vsock/vsock_addr.c:69:1: internal compiler error: Segmentation fault net/wireless/ap.c:60:1: internal compiler error: Segmentation fault net/wireless/chan.c:1390:1: internal compiler error: Segmentation fault net/wireless/debugfs.c:110:1: internal compiler error: Segmentation fault net/wireless/ethtool.c:29:1: internal compiler error: Segmentation fault net/wireless/ibss.c:542:1: internal compiler error: Segmentation fault net/wireless/mesh.c:297:1: internal compiler error: Segmentation fault net/wireless/mlme.c:1115:1: internal compiler error: Segmentation fault net/wireless/ocb.c:88:1: internal compiler error: Segmentation fault net/wireless/of.c:138:1: internal compiler error: Segmentation fault net/wireless/pmsr.c:663:1: internal compiler error: Segmentation fault net/wireless/radiotap.c:370:1: internal compiler error: Segmentation fault net/wireless/scan.c:3223:1: internal compiler error: Segmentation fault net/wireless/sme.c:1352:1: internal compiler error: Segmentation fault net/wireless/sysfs.c:176:1: internal compiler error: Segmentation fault net/wireless/trace.c:6: internal compiler error: Segmentation fault net/wireless/util.c:2286:1: internal compiler error: Segmentation fault net/wireless/wext-compat.c:1635:1: internal compiler error: Segmentation fault net/wireless/wext-sme.c:397:1: internal compiler error: Segmentation fault net/xdp/xdp_umem.c:260:1: internal compiler error: Segmentation fault net/xdp/xsk_buff_pool.c:656:1: internal compiler error: Segmentation fault net/xdp/xsk_queue.c:57:1: internal compiler error: Segmentation fault net/xdp/xskmap.c:272:1: internal compiler error: Segmentation fault net/xfrm/xfrm_algo.c:866:1: internal compiler error: Segmentation fault net/xfrm/xfrm_hash.c:40:1: internal compiler error: Segmentation fault net/xfrm/xfrm_ipcomp.c:373:1: internal compiler error: Segmentation fault net/xfrm/xfrm_output.c:909:1: internal compiler error: Segmentation fault net/xfrm/xfrm_replay.c:791:1: internal compiler error: Segmentation fault page_alloc.c:(.init.text+0x1f18): undefined reference to `node_data' pahole: .tmp_vmlinux.btf: No such file or directory security/apparmor/audit.c:247:1: internal compiler error: Segmentation fault security/apparmor/capability.c:158:1: internal compiler error: Segmentation fault security/apparmor/domain.c:1460:1: internal compiler error: Segmentation fault security/apparmor/file.c:711:1: internal compiler error: Segmentation fault security/apparmor/ipc.c:218:1: internal compiler error: Segmentation fault security/apparmor/label.c:2160:1: internal compiler error: Segmentation fault security/apparmor/lib.c:525:1: internal compiler error: Segmentation fault security/apparmor/match.c:792:1: internal compiler error: Segmentation fault security/apparmor/mount.c:739:1: internal compiler error: Segmentation fault security/apparmor/net.c:255:1: internal compiler error: Segmentation fault security/apparmor/policy.c:1203:1: internal compiler error: Segmentation fault security/apparmor/policy_unpack.c:1238: internal compiler error: Segmentation fault security/apparmor/procattr.c:136:1: internal compiler error: Segmentation fault security/apparmor/resource.c:187:1: internal compiler error: Segmentation fault security/apparmor/secid.c:161:1: internal compiler error: Segmentation fault security/apparmor/task.c:179:1: internal compiler error: Segmentation fault security/integrity/digsig_asymmetric.c:157:1: internal compiler error: Segmentation fault security/keys/request_key.c:805:1: internal compiler error: Segmentation fault security/smack/smack_access.c:699:1: internal compiler error: Segmentation fault sound/core/control.c:2307:1: internal compiler error: Segmentation fault sound/core/ctljack.c:84:1: internal compiler error: Segmentation fault sound/core/device.c:260:1: internal compiler error: Segmentation fault sound/core/init.c:1141:1: internal compiler error: Segmentation fault sound/core/jack.c:680:1: internal compiler error: Segmentation fault sound/core/memalloc.c:750:1: internal compiler error: Segmentation fault sound/core/pcm_dmaengine.c:461:1: internal compiler error: Segmentation fault sound/core/pcm_lib.c:2529:1: internal compiler error: Segmentation fault sound/core/pcm_memory.c:527:1: internal compiler error: Segmentation fault sound/core/pcm_misc.c:616:1: internal compiler error: Segmentation fault sound/core/pcm_native.c:4082:1: internal compiler error: Segmentation fault sound/core/seq/seq_fifo.c:283:1: internal compiler error: Segmentation fault sound/core/seq/seq_lock.c:26:1: internal compiler error: Segmentation fault sound/core/seq/seq_memory.c:504:1: internal compiler error: Segmentation fault sound/core/seq/seq_midi_event.c:459:1: internal compiler error: Segmentation fault sound/core/seq/seq_ports.c:711:1: internal compiler error: Segmentation fault sound/core/seq/seq_prioq.c:434:1: internal compiler error: Segmentation fault sound/core/seq/seq_queue.c:726:1: internal compiler error: Segmentation fault sound/core/seq/seq_timer.c:471:1: internal compiler error: Segmentation fault sound/core/sound_oss.c:186:1: internal compiler error: Segmentation fault sound/soc/bcm/bcm63xx-pcm-whistler.c:414:1: internal compiler error: Segmentation fault sound/soc/codecs/rl6231.c:253:1: internal compiler error: Segmentation fault sound/soc/codecs/rt5682.c:3153:1: internal compiler error: Segmentation fault sound/soc/codecs/rt700.c:1244:1: internal compiler error: Segmentation fault sound/soc/codecs/rt711-sdca.c:1591:1: internal compiler error: Segmentation fault sound/soc/codecs/rt711.c:1343:1: internal compiler error: Segmentation fault sound/soc/codecs/rt715-sdca.c:1078:1: internal compiler error: Segmentation fault sound/soc/codecs/rt715.c:1098:1: internal compiler error: Segmentation fault sound/soc/codecs/wcd-clsh-v2.c:903:1: internal compiler error: Segmentation fault sound/soc/fsl/fsl_ssi_dbg.c:140:1: internal compiler error: Segmentation fault sound/soc/generic/simple-card-utils.c:766:1: internal compiler error: Segmentation fault sound/soc/soc-card.c:225:1: internal compiler error: Segmentation fault sound/soc/soc-component.c:1244:1: internal compiler error: Segmentation fault sound/soc/soc-dai.c:840:1: internal compiler error: Segmentation fault sound/soc/soc-dapm.c:4862:1: internal compiler error: Segmentation fault sound/soc/soc-generic-dmaengine-pcm.c:497:1: internal compiler error: Segmentation fault sound/soc/soc-jack.c:452:1: internal compiler error: Segmentation fault sound/soc/soc-ops.c:984:1: internal compiler error: Segmentation fault sound/soc/soc-pcm.c:3031:1: internal compiler error: Segmentation fault vpu_malone.c:(.text+0x205c): undefined reference to `__moddi3' vpu_windsor.c:(.text+0x49c): undefined reference to `__moddi3' {standard input}: Error: .size expression for xpcs_validate does not evaluate to a constant {standard input}:1989: Error: unknown pseudo-op: `.sec' Error/Warning ids grouped by kconfigs: gcc_recent_errors |-- alpha-allmodconfig | |-- arch-alpha-include-asm-string.h:warning:__builtin_memcpy-forming-offset-is-out-of-the-bounds-of-object-tag_buf-with-type-unsigned-char | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-iio-frequency-admv1014.c:sparse:sparse:dubious:x-y | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- alpha-allyesconfig | |-- arch-alpha-include-asm-string.h:warning:__builtin_memcpy-forming-offset-is-out-of-the-bounds-of-object-tag_buf-with-type-unsigned-char | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-iio-frequency-admv1014.c:sparse:sparse:dubious:x-y | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- alpha-randconfig-p001-20220318 | |-- arch-alpha-include-asm-string.h:warning:__builtin_memcpy-forming-offset-is-out-of-the-bounds-of-object-tag_buf-with-type-unsigned-char | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- alpha-randconfig-r022-20220317 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- alpha-randconfig-r032-20220318 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- alpha-randconfig-r036-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-randconfig-r005-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- arc-randconfig-r014-20220318 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-randconfig-r015-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- arc-randconfig-r043-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arc-randconfig-r043-20220318 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop | `-- pahole:.tmp_vmlinux.btf:No-such-file-or-directory |-- arm-allmodconfig | |-- drivers-bus-imx-weim.c:sparse:sparse:symbol-weim_of_notifier-was-not-declared.-Should-it-be-static | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:left-side-has-type-unsigned-int | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:right-side-has-type-restricted-__be32 | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:incorrect-type-in-assignment-(different-base-types)-expected-unsigned-int-usertype-linkFailureCnt-got-restricted-__be32-usertype | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:invalid-assignment: | |-- drivers-soc-rockchip-dtpm.c:sparse:sparse:obsolete-array-initializer-use-C99-syntax | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm-allyesconfig | |-- drivers-bus-imx-weim.c:sparse:sparse:symbol-weim_of_notifier-was-not-declared.-Should-it-be-static | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:left-side-has-type-unsigned-int | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:right-side-has-type-restricted-__be32 | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:incorrect-type-in-assignment-(different-base-types)-expected-unsigned-int-usertype-linkFailureCnt-got-restricted-__be32-usertype | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:invalid-assignment: | |-- drivers-soc-rockchip-dtpm.c:sparse:sparse:obsolete-array-initializer-use-C99-syntax | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm-randconfig-c002-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm-randconfig-c002-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm-randconfig-r006-20220317 | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm-randconfig-r012-20220318 | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h:No-such-file-or-directory |-- arm64-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm64-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm64-defconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm64-randconfig-c023-20220318 | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- arm64-randconfig-r011-20220317 | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- csky-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- csky-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- csky-defconfig | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- csky-randconfig-r026-20220318 | |-- drivers-media-platform-samsung-exynos4-is-fimc-isp-video.h:warning:no-previous-prototype-for-fimc_isp_video_device_unregister | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- h8300-allmodconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-media-platform-st-stm32-dma2d-dma2d-hw.c:internal-compiler-error:in-extract_insn-at-recog.c | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-cacheflush.h:warning:struct-folio-declared-inside-parameter-list-will-not-be-visible-outside-of-this-definition-or-declaration | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- h8300-allyesconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-media-platform-st-stm32-dma2d-dma2d-hw.c:internal-compiler-error:in-extract_insn-at-recog.c | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-cacheflush.h:warning:struct-folio-declared-inside-parameter-list-will-not-be-visible-outside-of-this-definition-or-declaration | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- h8300-randconfig-c024-20220317 | `-- drivers-media-platform-st-stm32-dma2d-dma2d-hw.c:internal-compiler-error:in-extract_insn-at-recog.c |-- i386-allnoconfig | `-- Documentation-driver-api-nvdimm-nvdimm.rst:(SEVERE-)-Title-level-inconsistent: |-- i386-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-debian-10.3 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-debian-10.3-kselftests | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-defconfig | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-a001 | `-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set |-- i386-randconfig-a003 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- i386-randconfig-a005 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- i386-randconfig-a012 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-a014 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- i386-randconfig-a016 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- i386-randconfig-c001 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-c021 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- i386-randconfig-m021 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- i386-randconfig-s001 | |-- drivers-gpu-drm-gma500-intel_bios.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-const-p-got-unsigned-char-noderef-usertype-__iomem | |-- drivers-gpu-drm-gma500-opregion.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-const-p-got-void-noderef-__iomem-assigned-base | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- i386-randconfig-s002 | |-- drivers-gpu-drm-gma500-intel_bios.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-const-p-got-unsigned-char-noderef-usertype-__iomem | |-- drivers-gpu-drm-gma500-opregion.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-const-p-got-void-noderef-__iomem-assigned-base | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- ia64-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- ia64-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | `-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_migrate_context |-- ia64-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- ia64-randconfig-r034-20220317 | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- m68k-allmodconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-allyesconfig | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-bvme6000_defconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-defconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-randconfig-c004-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-randconfig-r003-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-randconfig-r013-20220318 | |-- arch-m68k-kernel-machine_kexec.c:undefined-reference-to-m68k_mmutype | `-- m68k-linux-ld:arch-m68k-kernel-machine_kexec.c:undefined-reference-to-m68k_cputype |-- m68k-randconfig-r026-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- m68k-randconfig-r035-20220317 | |-- arch-m68k-kernel-machine_kexec.c:undefined-reference-to-m68k_mmutype | |-- arch-m68k-kernel-time.c:undefined-reference-to-mach_get_rtc_pll | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- m68k-linux-ld:arch-m68k-kernel-machine_kexec.c:undefined-reference-to-m68k_cputype | `-- m68k-linux-ld:arch-m68k-kernel-time.c:undefined-reference-to-mach_set_rtc_pll |-- m68k-randconfig-s032-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst |-- mips-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- mips-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- mips-randconfig-c003-20220318 | `-- include-linux-fortify-string.h:warning:__builtin_memcpy-offset-is-out-of-the-bounds |-- mips-randconfig-c023-20220317 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- mips-randconfig-s032-20220317 | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- include-linux-fortify-string.h:warning:__builtin_memcpy-offset-is-out-of-the-bounds | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop | |-- mips64-linux-ld:page_alloc.c:(.init.text):undefined-reference-to-node_data | `-- page_alloc.c:(.init.text):undefined-reference-to-node_data |-- nds32-allmodconfig | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-allnoconfig | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-allyesconfig | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-buildonly-randconfig-r001-20220317 | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-defconfig | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-randconfig-c003-20220317 | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nds32-randconfig-r001-20220318 | |-- Makefile:arch-nds32-Makefile:No-such-file-or-directory | |-- arch-Kconfig:can-t-open-file-arch-nds32-Kconfig | `-- make:No-rule-to-make-target-arch-nds32-Makefile-. |-- nios2-allmodconfig | |-- arch-nios2-kernel-misaligned.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-noderef-__user-to-got-unsigned-char-usertype-__pu_ptr | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- nios2-allyesconfig | |-- arch-nios2-kernel-misaligned.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-noderef-__user-to-got-unsigned-char-usertype-__pu_ptr | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- nios2-buildonly-randconfig-r002-20220317 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- nios2-defconfig | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- nios2-randconfig-r001-20220317 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- nios2-randconfig-r031-20220319 | |-- ERROR:__v4l2_async_nf_add_fwnode_remote-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined | |-- ERROR:v4l2_async_nf_cleanup-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined | |-- ERROR:v4l2_async_nf_unregister-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined | |-- ERROR:v4l2_async_register_subdev-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined | |-- ERROR:v4l2_async_subdev_nf_register-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined | |-- ERROR:v4l2_async_unregister_subdev-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined | |-- ERROR:v4l2_get_link_freq-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined | |-- ERROR:v4l2_subdev_call_wrappers-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined | |-- ERROR:v4l2_subdev_get_fwnode_pad_1_to_1-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined | `-- ERROR:v4l2_subdev_link_validate-drivers-media-platform-nxp-imx-mipi-csis.ko-undefined |-- openrisc-randconfig-m031-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- openrisc-randconfig-m031-20220318 | |-- FAILED:load-BTF-from-vmlinux:No-such-file-or-directory | |-- drivers-mmc-host-litex_mmc.c-litex_mmc_request()-error:we-previously-assumed-data-could-be-null-(see-line-) | |-- drivers-power-supply-ip5xxx_power.c-ip5xxx_battery_get_property()-error:uninitialized-symbol-raw-. | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- openrisc-randconfig-p002-20220317 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- openrisc-randconfig-r011-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- parisc-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- parisc-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- parisc-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- parisc64-defconfig | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- powerpc-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:left-side-has-type-unsigned-int | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:right-side-has-type-restricted-__be32 | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:incorrect-type-in-assignment-(different-base-types)-expected-unsigned-int-usertype-linkFailureCnt-got-restricted-__be32-usertype | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:invalid-assignment: | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- powerpc-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:left-side-has-type-unsigned-int | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:right-side-has-type-restricted-__be32 | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:incorrect-type-in-assignment-(different-base-types)-expected-unsigned-int-usertype-linkFailureCnt-got-restricted-__be32-usertype | |-- drivers-scsi-lpfc-lpfc_els.c:sparse:sparse:invalid-assignment: | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- powerpc-buildonly-randconfig-r006-20220317 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- powerpc-holly_defconfig | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- powerpc-randconfig-r024-20220317 | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- powerpc-randconfig-r035-20220318 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- powerpc64-buildonly-randconfig-r001-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- powerpc64-randconfig-p001-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- riscv-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- riscv-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- riscv-defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- riscv-nommu_k210_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- riscv-nommu_virt_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- riscv-randconfig-c003-20220313 | |-- arch-riscv-kernel-cacheinfo.c:internal-compiler-error:Segmentation-fault | |-- arch-riscv-kernel-crash_dump.c:internal-compiler-error:Segmentation-fault | |-- arch-riscv-kernel-patch.c:internal-compiler-error:Segmentation-fault | |-- arch-riscv-kernel-signal.c:internal-compiler-error:Segmentation-fault | |-- arch-riscv-mm-extable.c:internal-compiler-error:Segmentation-fault | |-- arch-riscv-mm-physaddr.c:internal-compiler-error:Segmentation-fault | |-- block-blk-mq-rdma.c:internal-compiler-error:Segmentation-fault | |-- block-blk-zoned.c:internal-compiler-error:Segmentation-fault | |-- block-sed-opal.c:internal-compiler-error:Segmentation-fault | |-- crypto-acompress.c:internal-compiler-error:Segmentation-fault | |-- crypto-aead.c:internal-compiler-error:Segmentation-fault | |-- crypto-ahash.c:internal-compiler-error:Segmentation-fault | |-- crypto-akcipher.c:internal-compiler-error:Segmentation-fault | |-- crypto-api.c:internal-compiler-error:Segmentation-fault | |-- crypto-asymmetric_keys-public_key.c:internal-compiler-error:Segmentation-fault | |-- crypto-dh.c:internal-compiler-error:Segmentation-fault | |-- crypto-ecc.c:internal-compiler-error:Segmentation-fault | |-- crypto-geniv.c:internal-compiler-error:Segmentation-fault | |-- crypto-gf128mul.c:internal-compiler-error:Segmentation-fault | |-- crypto-kpp.c:internal-compiler-error:Segmentation-fault | |-- crypto-rng.c:internal-compiler-error:Segmentation-fault | |-- crypto-scompress.c:internal-compiler-error:Segmentation-fault | |-- crypto-shash.c:internal-compiler-error:Segmentation-fault | |-- crypto-skcipher.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-map.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-power-domain_governor.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-power-sysfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-power-wakeirq.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-regmap-regcache-flat.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-regmap-regcache-rbtree.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-regmap-regcache.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-regmap-regmap-debugfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-regmap-regmap-mmio.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-regmap-regmap-sdw-mbq.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-regmap-regmap-slimbus.c:internal-compiler-error:Segmentation-fault | |-- drivers-base-syscore.c:internal-compiler-error:Segmentation-fault | |-- drivers-char-ipmi-ipmi_bt_sm.c:internal-compiler-error:Segmentation-fault | |-- drivers-char-ipmi-ipmi_kcs_sm.c:internal-compiler-error:Segmentation-fault | |-- drivers-char-ipmi-ipmi_plat_data.c:internal-compiler-error:Segmentation-fault | |-- drivers-char-ipmi-ipmi_si_hotmod.c:internal-compiler-error:Segmentation-fault | |-- drivers-char-ipmi-ipmi_si_mem_io.c:internal-compiler-error:Segmentation-fault | |-- drivers-char-ipmi-ipmi_si_port_io.c:internal-compiler-error:Segmentation-fault | |-- drivers-char-ipmi-ipmi_smic_sm.c:internal-compiler-error:Segmentation-fault | |-- drivers-char-tpm-eventlog-efi.c:internal-compiler-error:Segmentation-fault | |-- drivers-clk-clk-composite.c:internal-compiler-error:Segmentation-fault | |-- drivers-clk-clk-fractional-divider.c:internal-compiler-error:Segmentation-fault | |-- drivers-comedi-comedi_buf.c:internal-compiler-error:Segmentation-fault | |-- drivers-comedi-drivers.c:internal-compiler-error:Segmentation-fault | |-- drivers-comedi-range.c:internal-compiler-error:Segmentation-fault | |-- drivers-crypto-ccree-cc_aead.c:internal-compiler-error:Segmentation-fault | |-- drivers-crypto-ccree-cc_buffer_mgr.c:internal-compiler-error:Segmentation-fault | |-- drivers-crypto-ccree-cc_cipher.c:internal-compiler-error:Segmentation-fault | |-- drivers-crypto-ccree-cc_fips.c:internal-compiler-error:Segmentation-fault | |-- drivers-crypto-ccree-cc_hash.c:internal-compiler-error:Segmentation-fault | |-- drivers-crypto-ccree-cc_pm.c:internal-compiler-error:Segmentation-fault | |-- drivers-crypto-ccree-cc_request_mgr.c:internal-compiler-error:Segmentation-fault | |-- drivers-crypto-ccree-cc_sram_mgr.c:internal-compiler-error:Segmentation-fault | |-- drivers-dma-buf-dma-fence-array.c:internal-compiler-error:Segmentation-fault | |-- drivers-dma-buf-dma-fence-chain.c:internal-compiler-error:Segmentation-fault | |-- drivers-dma-buf-dma-fence.c:internal-compiler-error:Segmentation-fault | |-- drivers-dma-buf-dma-heap.c:internal-compiler-error:Segmentation-fault | |-- drivers-firmware-efi-vars.c:internal-compiler-error:Segmentation-fault | |-- drivers-gpio-gpiolib-of.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-hid-cmedia.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-hid-debug.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-hid-picolcd_debugfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-hid-picolcd_fb.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-hid-picolcd_leds.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-hid-roccat-common.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-hid-uclogic-params.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-hid-uclogic-rdesc.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-usbhid-hiddev.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-addr.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-agent.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-cache.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-cm_trace.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-counters.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-cq.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-ib_core_uverbs.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-iwpm_msg.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-iwpm_util.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-lag.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-mad_rmpp.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-mr_pool.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-multicast.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-netlink.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-packer.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-rdma_core.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-restrack.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-rw.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-sa_query.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-smi.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-sysfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-trace.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-ud_header.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-umem.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-umem_dmabuf.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-umem_odp.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_cmd.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_ioctl.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_marshall.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_async_fd.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_counters.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_cq.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_device.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_dm.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_flow_action.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_mr.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_qp.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_srq.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_std_types_wq.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-uverbs_uapi.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-core-verbs.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-sw-siw-siw_cm.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-sw-siw-siw_cq.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-sw-siw-siw_mem.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-sw-siw-siw_qp.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-sw-siw-siw_qp_tx.c:internal-compiler-error:Segmentation-fault | |-- drivers-infiniband-sw-siw-siw_verbs.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-matrix-keymap.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-misc-adxl34x.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-misc-cma3000_d.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-rmi4-rmi_2d_sensor.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-rmi4-rmi_f30.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-rmi4-rmi_f54.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-rmi4-rmi_f55.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-touchscreen.c:internal-compiler-error:Segmentation-fault | |-- drivers-iommu-of_iommu.c:internal-compiler-error:Segmentation-fault | |-- drivers-leds-leds-ti-lmu-common.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-common-videobuf2-frame_vector.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-common-videobuf2-vb2-trace.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-common-videobuf2-videobuf2-dma-contig.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-common-videobuf2-videobuf2-dma-sg.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-common-videobuf2-videobuf2-memops.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-common-videobuf2-videobuf2-vmalloc.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-platform-xilinx-xilinx-dma.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-radio-tea575x.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-cpia2-cpia2_core.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-cpia2-cpia2_usb.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-gspca-autogain_functions.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-gspca-stv06xx-stv06xx_pb0100.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-gspca-stv06xx-stv06xx_st6422.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-pwc-pwc-ctrl.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-pwc-pwc-dec23.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-pwc-pwc-uncompress.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-pwc-pwc-v4l.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-stkwebcam-stk-sensor.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-uvc-uvc_ctrl.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-uvc-uvc_debugfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-uvc-uvc_entity.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-uvc-uvc_isight.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-uvc-uvc_metadata.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-uvc-uvc_queue.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-uvc-uvc_status.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-uvc-uvc_v4l2.c:internal-compiler-error:Segmentation-fault | |-- drivers-media-usb-uvc-uvc_video.c:internal-compiler-error:Segmentation-fault | |-- drivers-mfd-cs47l35-tables.c:internal-compiler-error:Segmentation-fault | |-- drivers-mfd-madera-core.c:internal-compiler-error:Segmentation-fault | |-- drivers-mfd-mfd-core.c:internal-compiler-error:Segmentation-fault | |-- drivers-misc-eeprom-eeprom_93cx6.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-chips-cfi_cmdset_0020.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-mtdsuper.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-bbt.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-ecc-sw-hamming.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-denali.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_base.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_hynix.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_jedec.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_legacy.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_macronix.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_micron.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_onfi.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_samsung.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_timings.c:internal-compiler-error:Segmentation-fault | |-- drivers-mtd-nand-raw-nand_toshiba.c:internal-compiler-error:Segmentation-fault | |-- drivers-net-can-dev-length.c:internal-compiler-error:Segmentation-fault | |-- drivers-net-can-dev-rx-offload.c:internal-compiler-error:Segmentation-fault | |-- drivers-net-can-dev-skb.c:internal-compiler-error:Segmentation-fault | |-- drivers-net-phy-mii_timestamper.c:internal-compiler-error:Segmentation-fault | |-- drivers-nfc-fdp-fdp.c:internal-compiler-error:Segmentation-fault | |-- drivers-nvme-host-zns.c:internal-compiler-error:Segmentation-fault | |-- drivers-nvme-target-zns.c:internal-compiler-error:Segmentation-fault | |-- drivers-of-kobj.c:internal-compiler-error:Segmentation-fault | |-- drivers-parport-daisy.c:internal-compiler-error:Segmentation-fault | |-- drivers-parport-ieee1284.c:internal-compiler-error:Segmentation-fault | |-- drivers-parport-ieee1284_ops.c:internal-compiler-error:Segmentation-fault | |-- drivers-parport-probe.c:internal-compiler-error:Segmentation-fault | |-- drivers-pci-of.c:internal-compiler-error:Segmentation-fault | |-- drivers-pcmcia-rsrc_mgr.c:internal-compiler-error:Segmentation-fault | |-- drivers-phy-phy-core-mipi-dphy.c:internal-compiler-error:Segmentation-fault | |-- drivers-rtc-sysfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-scsi-iscsi_boot_sysfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-scsi-libiscsi.c:internal-compiler-error:Segmentation-fault | |-- drivers-scsi-libiscsi_tcp.c:internal-compiler-error:Segmentation-fault | |-- drivers-scsi-libsas-sas_event.c:internal-compiler-error:Segmentation-fault | |-- drivers-scsi-libsas-sas_task.c:internal-compiler-error:Segmentation-fault | |-- drivers-scsi-scsi_lib_dma.c:internal-compiler-error:Segmentation-fault | |-- drivers-scsi-ufs-ufs-sysfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-slimbus-messaging.c:internal-compiler-error:Segmentation-fault | |-- drivers-slimbus-stream.c:internal-compiler-error:Segmentation-fault | |-- drivers-ssb-driver_chipcommon.c:internal-compiler-error:Segmentation-fault | |-- drivers-ssb-scan.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_auth.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_configfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_datain_values.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_device.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_erl0.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_erl1.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_erl2.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_login.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_nego.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_nodeattrib.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_parameters.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_seq_pdu_list.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_stat.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_tmr.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_tpg.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_transport.c:internal-compiler-error:Segmentation-fault | |-- drivers-target-iscsi-iscsi_target_util.c:internal-compiler-error:Segmentation-fault | |-- drivers-tty-tty_audit.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-cdns3-drd.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-cdns3-host.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-chipidea-host.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-core-config.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-core-devices.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-core-endpoint.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-core-generic.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-core-port.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-core-quirks.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-core-sysfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-dwc3-drd.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-dwc3-ep0.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-dwc3-gadget.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-composite.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-config.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-epautoconf.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-function-f_tcm.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-function-storage_common.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-function-u_uac1_legacy.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-function-uvc_configfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-function-uvc_queue.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-function-uvc_v4l2.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-function-uvc_video.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-functions.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-u_f.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-udc-snps_udc_core.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-udc-trace.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-gadget-usbstring.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-host-xhci-dbg.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-isp1760-isp1760-udc.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-mon-mon_stat.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-musb-musb_gadget.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-musb-musb_gadget_ep0.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-storage-initializers.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-typec-bus.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-typec-tcpm-tcpm.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-usbip-stub_rx.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-usbip-stub_tx.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-usbip-usbip_event.c:internal-compiler-error:Segmentation-fault | |-- drivers-vfio-mdev-vfio_mdev.c:internal-compiler-error:Segmentation-fault | |-- drivers-video-fbdev-core-fb_defio.c:internal-compiler-error:Segmentation-fault | |-- drivers-video-fbdev-core-fbcmap.c:internal-compiler-error:Segmentation-fault | |-- drivers-video-fbdev-core-fbsysfs.c:internal-compiler-error:Segmentation-fault | |-- drivers-virtio-virtio_ring.c:internal-compiler-error:Segmentation-fault | |-- drivers-w1-w1_family.c:internal-compiler-error:Segmentation-fault | |-- drivers-w1-w1_netlink.c:internal-compiler-error:Segmentation-fault | |-- drivers-watchdog-watchdog_pretimeout.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-addr_list.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-callback.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-cmservice.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-dir_edit.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-dir_silly.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-dynroot.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-file.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-flock.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-fs_operation.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-fs_probe.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-mntpt.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-server_list.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-vl_alias.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-vl_list.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-vl_probe.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-vl_rotate.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-vlclient.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-volume.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-write.c:internal-compiler-error:Segmentation-fault | |-- fs-afs-xattr.c:internal-compiler-error:Segmentation-fault | |-- fs-autofs-expire.c:internal-compiler-error:Segmentation-fault | |-- fs-autofs-inode.c:internal-compiler-error:Segmentation-fault | |-- fs-autofs-root.c:internal-compiler-error:Segmentation-fault | |-- fs-autofs-symlink.c:internal-compiler-error:Segmentation-fault | |-- fs-autofs-waitq.c:internal-compiler-error:Segmentation-fault | |-- fs-bad_inode.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-async-thread.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-block-group.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-block-rsv.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-ctree.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-delalloc-space.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-dev-replace.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-dir-item.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-discard.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-export.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-file-item.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-free-space-cache.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-free-space-tree.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-inode-item.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-ioctl.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-locking.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-lzo.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-orphan.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-print-tree.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-qgroup.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-raid56.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-reflink.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-root-tree.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-struct-funcs.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-subpage.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-transaction.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-tree-defrag.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-tree-log.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-tree-mod-log.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-ulist.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-uuid-tree.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-verity.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-xattr.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-zlib.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-zoned.c:internal-compiler-error:Segmentation-fault | |-- fs-btrfs-zstd.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-addr.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-caps.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-ceph_frag.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-debugfs.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-dir.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-export.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-file.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-inode.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-io.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-ioctl.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-mdsmap.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-metric.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-quota.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-snap.c:internal-compiler-error:Segmentation-fault | |-- fs-ceph-xattr.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-cifs_debug.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-cifs_dfs_ref.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-cifs_spnego.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-cifs_swn.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-cifs_unicode.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-cifsacl.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-cifsencrypt.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-cifssmb.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-connect.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-dfs_cache.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-dir.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-file.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-fs_context.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-inode.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-ioctl.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-link.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-misc.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-netlink.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-netmisc.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-readdir.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-sess.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-smb1ops.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-smb2file.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-smb2inode.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-smb2maperror.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-smb2misc.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-smb2ops.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-smb2pdu.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-smb2transport.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-smbencrypt.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-trace.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-transport.c:internal-compiler-error:Segmentation-fault | |-- fs-cifs-unc.c:internal-compiler-error:Segmentation-fault | |-- fs-coda-cache.c:internal-compiler-error:Segmentation-fault | |-- fs-coda-cnode.c:internal-compiler-error:Segmentation-fault | |-- fs-coda-dir.c:internal-compiler-error:Segmentation-fault | |-- fs-coda-file.c:internal-compiler-error:Segmentation-fault | |-- fs-coda-pioctl.c:internal-compiler-error:Segmentation-fault | |-- fs-coda-symlink.c:internal-compiler-error:Segmentation-fault | |-- fs-coda-upcall.c:internal-compiler-error:Segmentation-fault | |-- fs-configfs-file.c:internal-compiler-error:Segmentation-fault | |-- fs-configfs-inode.c:internal-compiler-error:Segmentation-fault | |-- fs-configfs-symlink.c:internal-compiler-error:Segmentation-fault | |-- fs-crypto-bio.c:internal-compiler-error:Segmentation-fault | |-- fs-crypto-fname.c:internal-compiler-error:Segmentation-fault | |-- fs-crypto-hkdf.c:internal-compiler-error:Segmentation-fault | |-- fs-crypto-hooks.c:internal-compiler-error:Segmentation-fault | |-- fs-crypto-keysetup.c:internal-compiler-error:Segmentation-fault | |-- fs-crypto-keysetup_v1.c:internal-compiler-error:Segmentation-fault | |-- fs-crypto-policy.c:internal-compiler-error:Segmentation-fault | |-- fs-d_path.c:internal-compiler-error:Segmentation-fault | |-- fs-dlm-dir.c:internal-compiler-error:Segmentation-fault | |-- fs-dlm-member.c:internal-compiler-error:Segmentation-fault | |-- fs-dlm-midcomms.c:internal-compiler-error:Segmentation-fault | |-- fs-dlm-plock.c:internal-compiler-error:Segmentation-fault | |-- fs-dlm-rcom.c:internal-compiler-error:Segmentation-fault | |-- fs-dlm-recover.c:internal-compiler-error:Segmentation-fault | |-- fs-dlm-recoverd.c:internal-compiler-error:Segmentation-fault | |-- fs-dlm-requestqueue.c:internal-compiler-error:Segmentation-fault | |-- fs-efivarfs-inode.c:internal-compiler-error:Segmentation-fault | |-- fs-exportfs-expfs.c:internal-compiler-error:Segmentation-fault | |-- fs-ext2-xattr_user.c:internal-compiler-error:Segmentation-fault | |-- fs-fhandle.c:internal-compiler-error:Segmentation-fault | |-- fs-fs_context.c:internal-compiler-error:Segmentation-fault | |-- fs-fs_pin.c:internal-compiler-error:Segmentation-fault | |-- fs-fs_struct.c:internal-compiler-error:Segmentation-fault | |-- fs-fsopen.c:internal-compiler-error:Segmentation-fault | |-- fs-gfs2-lock_dlm.c:internal-compiler-error:Segmentation-fault | |-- fs-ioctl.c:internal-compiler-error:Segmentation-fault | |-- fs-kernfs-dir.c:internal-compiler-error:Segmentation-fault | |-- fs-kernfs-file.c:internal-compiler-error:Segmentation-fault | |-- fs-kernfs-inode.c:internal-compiler-error:Segmentation-fault | |-- fs-kernfs-symlink.c:internal-compiler-error:Segmentation-fault | |-- fs-namei.c:internal-compiler-error:Segmentation-fault | |-- fs-nls-nls_base.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-attrib.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-attrlist.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-dir.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-file.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-frecord.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-fslog.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-fsntfs.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-index.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-inode.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-lib-decompress_common.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-lib-lzx_decompress.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-lznt.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-namei.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-record.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-run.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-upcase.c:internal-compiler-error:Segmentation-fault | |-- fs-ntfs3-xattr.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-acl.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-alloc.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-aops.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-blockcheck.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-buffer_head_io.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-cluster-masklog.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-cluster-netdebug.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-cluster-quorum.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-cluster-tcp.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-dcache.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-dir.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-dlmfs-userdlm.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-dlmglue.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-export.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-extent_map.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-file.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-filecheck.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-heartbeat.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-inode.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-ioctl.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-journal.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-localalloc.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-locks.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-mmap.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-move_extents.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-namei.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-quota_global.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-refcounttree.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-reservations.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-resize.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-slot_map.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-suballoc.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-symlink.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-sysfile.c:internal-compiler-error:Segmentation-fault | |-- fs-ocfs2-xattr.c:internal-compiler-error:Segmentation-fault | |-- fs-omfs-bitmap.c:internal-compiler-error:Segmentation-fault | |-- fs-omfs-dir.c:internal-compiler-error:Segmentation-fault | |-- fs-omfs-file.c:internal-compiler-error:Segmentation-fault | |-- fs-open.c:internal-compiler-error:Segmentation-fault | |-- fs-overlayfs-dir.c:internal-compiler-error:Segmentation-fault | |-- fs-overlayfs-export.c:internal-compiler-error:Segmentation-fault | |-- fs-overlayfs-inode.c:internal-compiler-error:Segmentation-fault | |-- fs-overlayfs-namei.c:internal-compiler-error:Segmentation-fault | |-- fs-overlayfs-readdir.c:internal-compiler-error:Segmentation-fault | |-- fs-overlayfs-util.c:internal-compiler-error:Segmentation-fault | |-- fs-pnode.c:internal-compiler-error:Segmentation-fault | |-- fs-pstore-pmsg.c:internal-compiler-error:Segmentation-fault | |-- fs-quota-quota.c:internal-compiler-error:Segmentation-fault | |-- fs-quota-quota_tree.c:internal-compiler-error:Segmentation-fault | |-- fs-readdir.c:internal-compiler-error:Segmentation-fault | |-- fs-select.c:internal-compiler-error:Segmentation-fault | |-- fs-smbfs_common-cifs_md4.c:internal-compiler-error:Segmentation-fault | |-- fs-splice.c:internal-compiler-error:Segmentation-fault | |-- fs-squashfs-decompressor_multi.c:internal-compiler-error:Segmentation-fault | |-- fs-squashfs-zstd_wrapper.c:internal-compiler-error:Segmentation-fault | |-- fs-stack.c:internal-compiler-error:Segmentation-fault | |-- fs-statfs.c:internal-compiler-error:Segmentation-fault | |-- fs-sync.c:internal-compiler-error:Segmentation-fault | |-- fs-unicode-utf8-core.c:internal-compiler-error:Segmentation-fault | |-- fs-utimes.c:internal-compiler-error:Segmentation-fault | |-- fs-xattr.c:internal-compiler-error:Segmentation-fault | |-- include-linux-module.h:internal-compiler-error:Segmentation-fault | |-- ipc-msgutil.c:internal-compiler-error:Segmentation-fault | |-- kernel-acct.c:internal-compiler-error:Segmentation-fault | |-- kernel-auditsc.c:internal-compiler-error:Segmentation-fault | |-- kernel-bpf-offload.c:internal-compiler-error:Segmentation-fault | |-- kernel-bpf-reuseport_array.c:internal-compiler-error:Segmentation-fault | |-- kernel-cgroup-freezer.c:internal-compiler-error:Segmentation-fault | |-- kernel-dma-direct.c:internal-compiler-error:Segmentation-fault | |-- kernel-irq-chip.c:internal-compiler-error:Segmentation-fault | |-- kernel-printk-printk_ringbuffer.c:internal-compiler-error:Segmentation-fault | |-- kernel-printk-printk_safe.c:internal-compiler-error:Segmentation-fault | |-- kernel-range.c:internal-compiler-error:Segmentation-fault | |-- kernel-rcu-rcu_segcblist.c:internal-compiler-error:Segmentation-fault | |-- kernel-rcu-sync.c:internal-compiler-error:Segmentation-fault | |-- kernel-sched-cpuacct.c:internal-compiler-error:Segmentation-fault | |-- kernel-sched-cputime.c:internal-compiler-error:Segmentation-fault | |-- kernel-sched-deadline.c:internal-compiler-error:Segmentation-fault | |-- kernel-sched-membarrier.c:internal-compiler-error:Segmentation-fault | |-- kernel-sched-rt.c:internal-compiler-error:Segmentation-fault | |-- kernel-sys.c:internal-compiler-error:Segmentation-fault | |-- kernel-task_work.c:internal-compiler-error:Segmentation-fault | |-- kernel-trace-trace_clock.c:internal-compiler-error:Segmentation-fault | |-- kernel-umh.c:internal-compiler-error:Segmentation-fault | |-- lib-asn1_decoder.c:internal-compiler-error:Segmentation-fault | |-- lib-cmdline.c:internal-compiler-error:Segmentation-fault | |-- lib-crc-itu-t.c:internal-compiler-error:Segmentation-fault | |-- lib-crc16.c:internal-compiler-error:Segmentation-fault | |-- lib-crypto-aes.c:internal-compiler-error:Segmentation-fault | |-- lib-crypto-blake2s-generic.c:internal-compiler-error:Segmentation-fault | |-- lib-crypto-poly1305-donna32.c:internal-compiler-error:Segmentation-fault | |-- lib-crypto-poly1305.c:internal-compiler-error:Segmentation-fault | |-- lib-dim-dim.c:internal-compiler-error:Segmentation-fault | |-- lib-dim-net_dim.c:internal-compiler-error:Segmentation-fault | |-- lib-dim-rdma_dim.c:internal-compiler-error:Segmentation-fault | |-- lib-dynamic_queue_limits.c:internal-compiler-error:Segmentation-fault | |-- lib-earlycpio.c:internal-compiler-error:Segmentation-fault | |-- lib-extable.c:internal-compiler-error:Segmentation-fault | |-- lib-fdt.c:internal-compiler-error:Segmentation-fault | |-- lib-fdt_ro.c:internal-compiler-error:Segmentation-fault | |-- lib-fdt_rw.c:internal-compiler-error:Segmentation-fault | |-- lib-fdt_sw.c:internal-compiler-error:Segmentation-fault | |-- lib-fdt_wip.c:internal-compiler-error:Segmentation-fault | |-- lib-flex_proportions.c:internal-compiler-error:Segmentation-fault | |-- lib-interval_tree.c:internal-compiler-error:Segmentation-fault | |-- lib-iov_iter.c:internal-compiler-error:Segmentation-fault | |-- lib-is_single_threaded.c:internal-compiler-error:Segmentation-fault | |-- lib-kunit-assert.c:internal-compiler-error:Segmentation-fault | |-- lib-linear_ranges.c:internal-compiler-error:Segmentation-fault | |-- lib-logic_pio.c:internal-compiler-error:Segmentation-fault | |-- lib-lz4-lz4_compress.c:internal-compiler-error:Segmentation-fault | |-- lib-lz4-lz4_decompress.c:internal-compiler-error:Segmentation-fault | |-- lib-lzo-lzo1x_compress.c:internal-compiler-error:Segmentation-fault | |-- lib-lzo-lzo1x_decompress_safe.c:internal-compiler-error:Segmentation-fault | |-- lib-math-rational.c:internal-compiler-error:Segmentation-fault | |-- lib-mpi-generic_mpih-mul2.c:internal-compiler-error:Segmentation-fault | |-- lib-mpi-generic_mpih-mul3.c:internal-compiler-error:Segmentation-fault | |-- lib-mpi-mpi-div.c:internal-compiler-error:Segmentation-fault | |-- lib-mpi-mpi-mod.c:internal-compiler-error:Segmentation-fault | |-- lib-mpi-mpi-mul.c:internal-compiler-error:Segmentation-fault | |-- lib-mpi-mpih-div.c:internal-compiler-error:Segmentation-fault | |-- lib-mpi-mpih-mul.c:internal-compiler-error:Segmentation-fault | |-- lib-net_utils.c:internal-compiler-error:Segmentation-fault | |-- lib-nlattr.c:internal-compiler-error:Segmentation-fault | |-- lib-oid_registry.c:internal-compiler-error:Segmentation-fault | |-- lib-plist.c:internal-compiler-error:Segmentation-fault | |-- lib-raid6-int1.c:internal-compiler-error:Segmentation-fault | |-- lib-raid6-int2.c:internal-compiler-error:Segmentation-fault | |-- lib-raid6-int4.c:internal-compiler-error:Segmentation-fault | |-- lib-raid6-int8.c:internal-compiler-error:Segmentation-fault | |-- lib-seq_buf.c:internal-compiler-error:Segmentation-fault | |-- lib-syscall.c:internal-compiler-error:Segmentation-fault | |-- lib-zlib_deflate-deflate.c:internal-compiler-error:Segmentation-fault | |-- lib-zlib_deflate-deftree.c:internal-compiler-error:Segmentation-fault | |-- lib-zlib_inflate-inffast.c:internal-compiler-error:Segmentation-fault | |-- lib-zlib_inflate-inflate.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-common-entropy_common.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-common-fse_decompress.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-fse_compress.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-hist.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-huf_compress.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-zstd_compress.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-zstd_compress_literals.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-zstd_compress_sequences.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-zstd_compress_superblock.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-zstd_double_fast.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-zstd_fast.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-zstd_lazy.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-zstd_ldm.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-compress-zstd_opt.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-decompress-huf_decompress.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-decompress-zstd_ddict.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-decompress-zstd_decompress.c:internal-compiler-error:Segmentation-fault | |-- lib-zstd-decompress-zstd_decompress_block.c:internal-compiler-error:Segmentation-fault | |-- mm-folio-compat.c:internal-compiler-error:Segmentation-fault | |-- mm-hmm.c:internal-compiler-error:Segmentation-fault | |-- mm-interval_tree.c:internal-compiler-error:Segmentation-fault | |-- mm-mmu_notifier.c:internal-compiler-error:Segmentation-fault | |-- mm-ptdump.c:internal-compiler-error:Segmentation-fault | |-- net-6lowpan-iphc.c:internal-compiler-error:Segmentation-fault | |-- net-6lowpan-ndisc.c:internal-compiler-error:Segmentation-fault | |-- net-6lowpan-nhc.c:internal-compiler-error:Segmentation-fault | |-- net-ax25-ax25_addr.c:internal-compiler-error:Segmentation-fault | |-- net-ax25-ax25_iface.c:internal-compiler-error:Segmentation-fault | |-- net-ax25-ax25_in.c:internal-compiler-error:Segmentation-fault | |-- net-ax25-ax25_ip.c:internal-compiler-error:Segmentation-fault | |-- net-ax25-ax25_out.c:internal-compiler-error:Segmentation-fault | |-- net-ax25-ax25_std_in.c:internal-compiler-error:Segmentation-fault | |-- net-ax25-ax25_std_timer.c:internal-compiler-error:Segmentation-fault | |-- net-ax25-ax25_subr.c:internal-compiler-error:Segmentation-fault | |-- net-ax25-ax25_timer.c:internal-compiler-error:Segmentation-fault | |-- net-bridge-br_if.c:internal-compiler-error:Segmentation-fault | |-- net-bridge-br_switchdev.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfcnfg.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfctrl.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfdbgl.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfdgml.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cffrml.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfmuxl.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfpkt_skbuff.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfrfml.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfserl.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfsrvl.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfutill.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfveil.c:internal-compiler-error:Segmentation-fault | |-- net-caif-cfvidl.c:internal-compiler-error:Segmentation-fault | |-- net-can-j1939-transport.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-armor.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-auth.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-auth_none.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-auth_x.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-buffer.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-cls_lock_client.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-crush-crush.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-crush-mapper.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-decode.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-messenger_v1.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-messenger_v2.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-mon_client.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-msgpool.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-osdmap.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-pagelist.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-pagevec.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-snapshot.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-string_table.c:internal-compiler-error:Segmentation-fault | |-- net-ceph-striper.c:internal-compiler-error:Segmentation-fault | |-- net-core-datagram.c:internal-compiler-error:Segmentation-fault | |-- net-core-dev_addr_lists.c:internal-compiler-error:Segmentation-fault | |-- net-core-dst.c:internal-compiler-error:Segmentation-fault | |-- net-core-dst_cache.c:internal-compiler-error:Segmentation-fault | |-- net-core-flow_offload.c:internal-compiler-error:Segmentation-fault | |-- net-core-gen_estimator.c:internal-compiler-error:Segmentation-fault | |-- net-core-gen_stats.c:internal-compiler-error:Segmentation-fault | |-- net-core-gro.c:internal-compiler-error:Segmentation-fault | |-- net-core-gro_cells.c:internal-compiler-error:Segmentation-fault | |-- net-core-link_watch.c:internal-compiler-error:Segmentation-fault | |-- net-core-lwtunnel.c:internal-compiler-error:Segmentation-fault | |-- net-core-net-traces.c:internal-compiler-error:Segmentation-fault | |-- net-core-of_net.c:internal-compiler-error:Segmentation-fault | |-- net-core-scm.c:internal-compiler-error:Segmentation-fault | |-- net-core-secure_seq.c:internal-compiler-error:Segmentation-fault | |-- net-core-sock.c:internal-compiler-error:Segmentation-fault | |-- net-core-sock_reuseport.c:internal-compiler-error:Segmentation-fault | |-- net-core-stream.c:internal-compiler-error:Segmentation-fault | |-- net-core-timestamping.c:internal-compiler-error:Segmentation-fault | |-- net-core-tso.c:internal-compiler-error:Segmentation-fault | |-- net-core-utils.c:internal-compiler-error:Segmentation-fault | |-- net-dccp-ccids-ccid2.c:internal-compiler-error:Segmentation-fault | |-- net-dccp-input.c:internal-compiler-error:Segmentation-fault | |-- net-dccp-output.c:internal-compiler-error:Segmentation-fault | |-- net-dccp-qpolicy.c:internal-compiler-error:Segmentation-fault | |-- net-devres.c:internal-compiler-error:Segmentation-fault | |-- net-dns_resolver-dns_query.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-bitset.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-cabletest.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-channels.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-coalesce.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-common.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-eeprom.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-features.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-fec.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-ioctl.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-linkinfo.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-linkmodes.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-linkstate.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-module.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-pause.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-privflags.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-rings.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-stats.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-strset.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-tunnels.c:internal-compiler-error:Segmentation-fault | |-- net-ethtool-wol.c:internal-compiler-error:Segmentation-fault | |-- net-garp.c:internal-compiler-error:Segmentation-fault | |-- net-ieee802154-6lowpan-rx.c:internal-compiler-error:Segmentation-fault | |-- net-ieee802154-6lowpan-tx.c:internal-compiler-error:Segmentation-fault | |-- net-ieee802154-header_ops.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-datagram.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-fib_semantics.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-inet_connection_sock.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-inet_timewait_sock.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-ip_forward.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-ip_input.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-ip_options.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-ip_sockglue.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-ip_tunnel.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-ipmr_base.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-metrics.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-netlink.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-protocol.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-syncookies.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-tcp_fastopen.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-tcp_input.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-tcp_minisocks.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-tcp_rate.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-tcp_recovery.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-tcp_timer.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-tcp_ulp.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-udp_tunnel_core.c:internal-compiler-error:Segmentation-fault | |-- net-ipv4-xfrm4_input.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-addrconf_core.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-datagram.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-exthdrs_core.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-inet6_connection_sock.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-inet6_hashtables.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-ip6_checksum.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-ip6_input.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-ip6_output.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-ip6_udp_tunnel.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-ipv6_sockglue.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-mcast_snoop.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-output_core.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-protocol.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-rpl.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-syncookies.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-udp_offload.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-xfrm6_input.c:internal-compiler-error:Segmentation-fault | |-- net-ipv6-xfrm6_output.c:internal-compiler-error:Segmentation-fault | |-- net-l3mdev-l3mdev.c:internal-compiler-error:Segmentation-fault | |-- net-llc-llc_input.c:internal-compiler-error:Segmentation-fault | |-- net-llc-llc_output.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-aead_api.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-aes_cmac.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-aes_gmac.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-agg-rx.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-agg-tx.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-airtime.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-chan.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-debugfs.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-debugfs_key.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-debugfs_netdev.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-debugfs_sta.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-driver-ops.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-ethtool.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-fils_aead.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-he.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-ht.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-iface.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-key.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-michael.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-ocb.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-offchannel.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-pm.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-rate.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-rx.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-s1g.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-scan.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-spectmgmt.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-sta_info.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-status.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-tdls.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-tkip.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-trace.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-tx.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-util.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-vht.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-wep.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-wme.c:internal-compiler-error:Segmentation-fault | |-- net-mac80211-wpa.c:internal-compiler-error:Segmentation-fault | |-- net-mrp.c:internal-compiler-error:Segmentation-fault | |-- net-ncsi-ncsi-aen.c:internal-compiler-error:Segmentation-fault | |-- net-ncsi-ncsi-cmd.c:internal-compiler-error:Segmentation-fault | |-- net-ncsi-ncsi-rsp.c:internal-compiler-error:Segmentation-fault | |-- net-netlabel-netlabel_addrlist.c:internal-compiler-error:Segmentation-fault | |-- net-netrom-nr_dev.c:internal-compiler-error:Segmentation-fault | |-- net-netrom-nr_in.c:internal-compiler-error:Segmentation-fault | |-- net-netrom-nr_out.c:internal-compiler-error:Segmentation-fault | |-- net-netrom-nr_route.c:internal-compiler-error:Segmentation-fault | |-- net-netrom-nr_subr.c:internal-compiler-error:Segmentation-fault | |-- net-netrom-nr_timer.c:internal-compiler-error:Segmentation-fault | |-- net-nfc-hci-command.c:internal-compiler-error:Segmentation-fault | |-- net-nfc-hci-hcp.c:internal-compiler-error:Segmentation-fault | |-- net-nfc-hci-llc_nop.c:internal-compiler-error:Segmentation-fault | |-- net-nfc-hci-llc_shdlc.c:internal-compiler-error:Segmentation-fault | |-- net-openvswitch-actions.c:internal-compiler-error:Segmentation-fault | |-- net-openvswitch-dp_notify.c:internal-compiler-error:Segmentation-fault | |-- net-openvswitch-flow.c:internal-compiler-error:Segmentation-fault | |-- net-openvswitch-flow_netlink.c:internal-compiler-error:Segmentation-fault | |-- net-openvswitch-flow_table.c:internal-compiler-error:Segmentation-fault | |-- net-openvswitch-meter.c:internal-compiler-error:Segmentation-fault | |-- net-openvswitch-openvswitch_trace.c:internal-compiler-error:Segmentation-fault | |-- net-openvswitch-vport-internal_dev.c:internal-compiler-error:Segmentation-fault | |-- net-openvswitch-vport.c:internal-compiler-error:Segmentation-fault | |-- net-rds-af_rds.c:internal-compiler-error:Segmentation-fault | |-- net-rds-bind.c:internal-compiler-error:Segmentation-fault | |-- net-rds-cong.c:internal-compiler-error:Segmentation-fault | |-- net-rds-connection.c:internal-compiler-error:Segmentation-fault | |-- net-rds-info.c:internal-compiler-error:Segmentation-fault | |-- net-rds-message.c:internal-compiler-error:Segmentation-fault | |-- net-rds-page.c:internal-compiler-error:Segmentation-fault | |-- net-rds-rdma.c:internal-compiler-error:Segmentation-fault | |-- net-rds-recv.c:internal-compiler-error:Segmentation-fault | |-- net-rds-send.c:internal-compiler-error:Segmentation-fault | |-- net-rds-threads.c:internal-compiler-error:Segmentation-fault | |-- net-rds-transport.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-call_accept.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-call_event.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-call_object.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-conn_client.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-conn_event.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-conn_object.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-conn_service.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-input.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-insecure.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-key.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-local_event.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-local_object.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-output.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-peer_event.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-peer_object.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-recvmsg.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-rtt.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-sendmsg.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-server_key.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-skbuff.c:internal-compiler-error:Segmentation-fault | |-- net-rxrpc-utils.c:internal-compiler-error:Segmentation-fault | |-- net-sched-sch_fifo.c:internal-compiler-error:Segmentation-fault | |-- net-sched-sch_frag.c:internal-compiler-error:Segmentation-fault | |-- net-sched-sch_generic.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-associola.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-auth.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-bind_addr.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-chunk.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-endpointola.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-input.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-inqueue.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-ipv6.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-output.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-outqueue.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-sm_make_chunk.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-sm_sideeffect.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-sm_statefuns.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-socket.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-stream.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-stream_interleave.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-stream_sched.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-stream_sched_prio.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-stream_sched_rr.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-transport.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-tsnmap.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-ulpevent.c:internal-compiler-error:Segmentation-fault | |-- net-sctp-ulpqueue.c:internal-compiler-error:Segmentation-fault | |-- net-switchdev-switchdev.c:internal-compiler-error:Segmentation-fault | |-- net-tls-tls_device_fallback.c:internal-compiler-error:Segmentation-fault | |-- net-tls-tls_sw.c:internal-compiler-error:Segmentation-fault | |-- net-tls-trace.c:internal-compiler-error:Segmentation-fault | |-- net-unix-scm.c:internal-compiler-error:Segmentation-fault | |-- net-vmw_vsock-af_vsock_tap.c:internal-compiler-error:Segmentation-fault | |-- net-vmw_vsock-virtio_transport_common.c:internal-compiler-error:Segmentation-fault | |-- net-vmw_vsock-vsock_addr.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-ap.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-chan.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-debugfs.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-ethtool.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-ibss.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-mesh.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-mlme.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-ocb.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-of.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-pmsr.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-radiotap.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-scan.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-sme.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-sysfs.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-trace.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-util.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-wext-compat.c:internal-compiler-error:Segmentation-fault | |-- net-wireless-wext-sme.c:internal-compiler-error:Segmentation-fault | |-- net-xdp-xdp_umem.c:internal-compiler-error:Segmentation-fault | |-- net-xdp-xsk_buff_pool.c:internal-compiler-error:Segmentation-fault | |-- net-xdp-xsk_queue.c:internal-compiler-error:Segmentation-fault | |-- net-xdp-xskmap.c:internal-compiler-error:Segmentation-fault | |-- net-xfrm-xfrm_algo.c:internal-compiler-error:Segmentation-fault | |-- net-xfrm-xfrm_hash.c:internal-compiler-error:Segmentation-fault | |-- net-xfrm-xfrm_ipcomp.c:internal-compiler-error:Segmentation-fault | |-- net-xfrm-xfrm_output.c:internal-compiler-error:Segmentation-fault | |-- net-xfrm-xfrm_replay.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-audit.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-capability.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-domain.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-file.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-ipc.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-label.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-lib.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-match.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-mount.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-net.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-policy.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-policy_unpack.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-procattr.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-resource.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-secid.c:internal-compiler-error:Segmentation-fault | |-- security-apparmor-task.c:internal-compiler-error:Segmentation-fault | |-- security-integrity-digsig_asymmetric.c:internal-compiler-error:Segmentation-fault | |-- security-keys-request_key.c:internal-compiler-error:Segmentation-fault | |-- security-smack-smack_access.c:internal-compiler-error:Segmentation-fault | |-- sound-core-control.c:internal-compiler-error:Segmentation-fault | |-- sound-core-ctljack.c:internal-compiler-error:Segmentation-fault | |-- sound-core-device.c:internal-compiler-error:Segmentation-fault | |-- sound-core-init.c:internal-compiler-error:Segmentation-fault | |-- sound-core-jack.c:internal-compiler-error:Segmentation-fault | |-- sound-core-memalloc.c:internal-compiler-error:Segmentation-fault | |-- sound-core-pcm_dmaengine.c:internal-compiler-error:Segmentation-fault | |-- sound-core-pcm_lib.c:internal-compiler-error:Segmentation-fault | |-- sound-core-pcm_memory.c:internal-compiler-error:Segmentation-fault | |-- sound-core-pcm_misc.c:internal-compiler-error:Segmentation-fault | |-- sound-core-pcm_native.c:internal-compiler-error:Segmentation-fault | |-- sound-core-seq-seq_fifo.c:internal-compiler-error:Segmentation-fault | |-- sound-core-seq-seq_lock.c:internal-compiler-error:Segmentation-fault | |-- sound-core-seq-seq_memory.c:internal-compiler-error:Segmentation-fault | |-- sound-core-seq-seq_midi_event.c:internal-compiler-error:Segmentation-fault | |-- sound-core-seq-seq_ports.c:internal-compiler-error:Segmentation-fault | |-- sound-core-seq-seq_prioq.c:internal-compiler-error:Segmentation-fault | |-- sound-core-seq-seq_queue.c:internal-compiler-error:Segmentation-fault | |-- sound-core-seq-seq_timer.c:internal-compiler-error:Segmentation-fault | |-- sound-core-sound_oss.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-bcm-bcm63xx-pcm-whistler.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-codecs-rl6231.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-codecs-rt5682.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-codecs-rt700.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-codecs-rt711-sdca.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-codecs-rt711.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-codecs-rt715-sdca.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-codecs-rt715.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-codecs-wcd-clsh-v2.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-fsl-fsl_ssi_dbg.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-generic-simple-card-utils.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-soc-card.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-soc-component.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-soc-dai.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-soc-dapm.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-soc-generic-dmaengine-pcm.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-soc-jack.c:internal-compiler-error:Segmentation-fault | |-- sound-soc-soc-ops.c:internal-compiler-error:Segmentation-fault | `-- sound-soc-soc-pcm.c:internal-compiler-error:Segmentation-fault |-- riscv-randconfig-r002-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_migrate_context | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_register | `-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_unregister |-- riscv-randconfig-r034-20220318 | |-- drivers-gpio-gpio-max73.c:internal-compiler-error:Segmentation-fault | |-- drivers-hid-hid-vivaldi-common.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-input-poller.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-rmi4-rmi_f01.c:internal-compiler-error:Segmentation-fault | |-- drivers-input-rmi4-rmi_f03.c:internal-compiler-error:Segmentation-fault | |-- drivers-usb-dwc3-debugfs.c:internal-compiler-error:Segmentation-fault | |-- fs-eventfd.c:internal-compiler-error:Segmentation-fault | `-- fs-posix_acl.c:internal-compiler-error:Segmentation-fault |-- riscv-randconfig-r042-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- riscv-rv32_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-allmodconfig | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-iio-frequency-admv1014.c:sparse:sparse:dubious:x-y | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-cacheflush.h:warning:struct-folio-declared-inside-parameter-list-will-not-be-visible-outside-of-this-definition-or-declaration | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-buildonly-randconfig-r004-20220317 | |-- arch-s390-kernel-machine_kexec.c:warning:memcpy-offset-is-out-of-the-bounds | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_migrate_context | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_register | `-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_unregister |-- s390-defconfig | |-- arch-s390-kernel-machine_kexec.c:warning:memcpy-offset-is-out-of-the-bounds | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-randconfig-c024-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- s390-randconfig-r012-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-randconfig-r014-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- s390-randconfig-r044-20220317 | |-- include-linux-fortify-string.h:warning:__builtin_memcpy-offset-is-out-of-the-bounds | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- s390-randconfig-s031-20220317 | |-- arch-s390-kernel-machine_kexec.c:warning:memcpy-offset-is-out-of-the-bounds | |-- drivers-dma-idma64.c:undefined-reference-to-devm_ioremap_resource | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty |-- sh-allmodconfig | |-- arch-sh-kernel-machvec.c:warning:array-subscript-struct-sh_machine_vector-is-partly-outside-array-bounds-of-long-int | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop | `-- standard-input:Error:unknown-pseudo-op:sec |-- sh-allyesconfig | |-- arch-sh-kernel-machvec.c:warning:array-subscript-struct-sh_machine_vector-is-partly-outside-array-bounds-of-long-int | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop | `-- standard-input:Error:unknown-pseudo-op:sec |-- sh-randconfig-r031-20220318 | |-- arch-sh-kernel-machvec.c:warning:array-subscript-struct-sh_machine_vector-is-partly-outside-array-bounds-of-long-int | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sh-randconfig-r034-20220318 | |-- arch-sh-kernel-machvec.c:warning:array-subscript-struct-sh_machine_vector-is-partly-outside-array-bounds-of-long-int | `-- standard-input:Error:.size-expression-for-xpcs_validate-does-not-evaluate-to-a-constant |-- sparc-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- drivers-iio-frequency-admv1014.c:sparse:sparse:dubious:x-y | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-argument-(different-address-spaces)-expected-void-const-volatile-noderef-__iomem-addr-got-void | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-icr_base-got-void-noderef-__iomem | |-- drivers-irqchip-irq-renesas-h8s.c:sparse:sparse:incorrect-type-in-assignment-(different-address-spaces)-expected-void-static-toplevel-ipr_base-got-void-noderef-__iomem | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- drivers-nvmem-sunplus-ocotp.c:sparse:sparse:symbol-sp_otp_v0-was-not-declared.-Should-it-be-static | |-- drivers-tty-serial-sunplus-uart.c:sparse:sparse:symbol-sunplus_console_ports-was-not-declared.-Should-it-be-static | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- sparc-buildonly-randconfig-r006-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- sparc64-randconfig-r004-20220318 | |-- drivers-media-platform-samsung-exynos4-is-fimc-isp-video.h:warning:no-previous-prototype-for-fimc_isp_video_device_unregister | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | `-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting |-- sparc64-randconfig-r032-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- um-i386_defconfig | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- um-x86_64_defconfig | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-allnoconfig | `-- Documentation-driver-api-nvdimm-nvdimm.rst:(SEVERE-)-Title-level-inconsistent: |-- x86_64-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-defconfig | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-kexec | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-a002 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-a004 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-a006 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-a011 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-a015 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-c002 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-c022 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-m001 | `-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set |-- x86_64-randconfig-s021 | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-randconfig-s022 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-rhel-8.3 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-rhel-8.3-func | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-rhel-8.3-kselftests | |-- drivers-net-vxlan-vxlan_core.c:sparse:sparse:incorrect-type-in-argument-(different-base-types)-expected-unsigned-int-usertype-b-got-restricted-__be32-usertype-vni | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- x86_64-rhel-8.3-kunit | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-rcupdate.h:error:dereferencing-pointer-to-incomplete-type-struct-css_set | |-- kernel-sched-core.c:warning:no-previous-prototype-for-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-sched_cpu_wait_empty | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- xtensa-allmodconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- xtensa-allyesconfig | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop | |-- vpu_malone.c:(.text):undefined-reference-to-__moddi3 | `-- vpu_windsor.c:(.text):undefined-reference-to-__moddi3 |-- xtensa-randconfig-p002-20220318 | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop |-- xtensa-randconfig-r015-20220317 | |-- drivers-gpu-drm-amd-amdgpu-..-display-dc-core-dc_resource.c:warning:no-previous-prototype-for-is_timing_changed | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-calc_load_nohz_stop `-- xtensa-randconfig-r023-20220318 |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead `-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst clang_recent_errors |-- arm-buildonly-randconfig-r003-20220317 | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h-file-not-found |-- arm-netwinder_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- arm-randconfig-c002-20220317 | |-- arch-arm-kernel-ftrace.c:warning:no-previous-prototype-for-function-prepare_ftrace_return | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h-file-not-found |-- arm-randconfig-c002-20220318 | |-- arch-arm-kernel-unwind.c:warning:Assigned-value-is-garbage-or-undefined-clang-analyzer-core.uninitialized.Assign | |-- drivers-hid-hid-core.c:warning:Although-the-value-stored-to-field-is-used-in-the-enclosing-expression-the-value-is-never-actually-read-from-field-clang-analyzer-deadcode.DeadStores | |-- drivers-input-serio-ps2-gpio.c:warning:Value-stored-to-rxflags-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-memory-brcmstb_dpfe.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogou | |-- drivers-phy-broadcom-phy-brcm-usb.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-an | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop | |-- lib-stackinit_kunit.c:warning:Address-of-stack-memory-associated-with-local-variable-var-is-still-referred-to-by-the-global-variable-fill_start-upon-returning-to-the-caller.-This-will-be-a-dangling-re | |-- lib-stackinit_kunit.c:warning:Address-of-stack-memory-associated-with-local-variable-var-is-still-referred-to-by-the-global-variable-target_start-upon-returning-to-the-caller.-This-will-be-a-dangling- | |-- lib-stackinit_kunit.c:warning:Excessive-padding-in-struct-test_big_hole-(-padding-bytes-where-is-optimal). | `-- lib-stackinit_kunit.c:warning:Undefined-or-garbage-value-returned-to-caller-clang-analyzer-core.uninitialized.UndefReturn |-- arm-randconfig-r025-20220317 | `-- kernel-sched-sched.h:fatal-error:asm-paravirt_api_clock.h-file-not-found |-- arm64-randconfig-r033-20220319 | |-- lib-raid6-neon1.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 | |-- lib-raid6-neon2.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 | |-- lib-raid6-neon4.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 | |-- lib-raid6-neon8.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 | `-- lib-raid6-recov_neon_inner.c:warning:mixing-declarations-and-code-is-incompatible-with-standards-before-C99 |-- hexagon-buildonly-randconfig-r005-20220318 | |-- drivers-media-platform-renesas-renesas-ceu.c:warning:unused-variable-ceu_data_rz | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- hexagon-randconfig-r015-20220317 | `-- drivers-media-platform-samsung-s5p-jpeg-jpeg-core.c:warning:unused-variable-samsung_jpeg_match |-- hexagon-randconfig-r034-20220317 | `-- drivers-media-platform-st-sti-c8sectpfe-c8sectpfe-core.c:warning:unused-variable-c8sectpfe_match |-- hexagon-randconfig-r036-20220317 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- hexagon-randconfig-r041-20220317 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- hexagon-randconfig-r041-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- hexagon-randconfig-r045-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- hexagon-randconfig-r045-20220318 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- i386-randconfig-a002 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- i386-randconfig-a004 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- i386-randconfig-a006 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- i386-randconfig-a011 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- i386-randconfig-a013 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- i386-randconfig-a015 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- i386-randconfig-c001 | |-- drivers-hid-hid-core.c:warning:Although-the-value-stored-to-field-is-used-in-the-enclosing-expression-the-value-is-never-actually-read-from-field-clang-analyzer-deadcode.DeadStores | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop | `-- net-ipv4-tcp_input.c:warning:Value-stored-to-reason-is-never-read-clang-analyzer-deadcode.DeadStores |-- mips-cu1830-neo_defconfig | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- mips-randconfig-c004-20220318 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- riscv-randconfig-c006-20220317 | |-- drivers-clk-imx-clk-pll14xx.c:warning:Value-stored-to-pll_div_ctl1-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-firmware-turris-mox-rwtm.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-ana | |-- drivers-hid-hid-core.c:warning:Although-the-value-stored-to-field-is-used-in-the-enclosing-expression-the-value-is-never-actually-read-from-field-clang-analyzer-deadcode.DeadStores | |-- drivers-hwmon-nsa320-hwmon.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-analogous | |-- drivers-input-serio-ps2-gpio.c:warning:Value-stored-to-rxflags-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-chips-media-coda-bit.c:warning:Value-stored-to-value-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-chips-media-coda-common.c:warning:Array-access-(from-variable-formats-)-results-in-a-null-pointer-dereference-clang-analyzer-core.NullDereference | |-- drivers-media-platform-st-sti-delta-delta-debug.c:warning:Value-stored-to-delta-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-delta-delta-debug.c:warning:Value-stored-to-s-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-delta-delta-debug.c:warning:Value-stored-to-str-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-delta-delta-mjpeg-dec.c:warning:Value-stored-to-b-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-delta-delta-v4l2.c:warning:Value-stored-to-data-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-delta-delta-v4l2.c:warning:Value-stored-to-delta-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-delta-delta-v4l2.c:warning:Value-stored-to-str-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-delta-delta-v4l2.c:warning:Value-stored-to-str1-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-delta-delta-v4l2.c:warning:Value-stored-to-str2-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-hva-hva-h264.c:warning:Value-stored-to-dev-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-hva-hva-h264.c:warning:Value-stored-to-idr_pic_id-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-hva-hva-v4l2.c:warning:Value-stored-to-dev-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-hva-hva-v4l2.c:warning:Value-stored-to-frame-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-media-platform-st-sti-hva-hva-v4l2.c:warning:Value-stored-to-stream-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-mtd-nand-ecc-mxic.c:warning:Branch-condition-evaluates-to-a-garbage-value-clang-analyzer-core.uninitialized.Branch | |-- drivers-mtd-nand-ecc-mxic.c:warning:Value-stored-to-dev-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores | |-- drivers-phy-broadcom-phy-brcm-usb.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-with-an | |-- drivers-staging-greybus-arche-apb-ctrl.c:warning:Call-to-function-sprintf-is-insecure-as-it-does-not-provide-bounding-of-the-memory-buffer-or-security-checks-introduced-in-the-C11-standard.-Replace-wi | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- riscv-randconfig-c006-20220318 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- riscv-randconfig-r021-20220318 | `-- include-asm-generic-io.h:warning:performing-pointer-arithmetic-on-a-null-pointer-has-undefined-behavior-err:false |-- riscv-randconfig-r042-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- s390-randconfig-c005-20220317 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- s390-randconfig-c005-20220318 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- s390-randconfig-r002-20220317 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- s390-randconfig-r044-20220318 | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-a001 | |-- drivers-spi-spi-amd.c:warning:cast-to-smaller-integer-type-enum-amd_spi_versions-from-const-void | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- x86_64-randconfig-a003 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- x86_64-randconfig-a005 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-a012 | |-- fs-btrfs-ordered-data.c:warning:expecting-prototype-for-Add-an-ordered-extent-to-the-per().-Prototype-was-for-btrfs_add_ordered_extent()-instead | |-- fs-btrfs-tree-log.c:warning:This-comment-starts-with-but-isn-t-a-kernel-doc-comment.-Refer-Documentation-doc-guide-kernel-doc.rst | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-a014 | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime | |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote | |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start | `-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop |-- x86_64-randconfig-a016 | |-- include-linux-fortify-string.h:warning:call-to-__read_overflow2_field-declared-with-warning-attribute:detected-read-beyond-size-of-field-(2nd-parameter)-maybe-use-struct_group() | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init | |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp | `-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime `-- x86_64-randconfig-c007 |-- drivers-hid-hid-core.c:warning:Although-the-value-stored-to-field-is-used-in-the-enclosing-expression-the-value-is-never-actually-read-from-field-clang-analyzer-deadcode.DeadStores |-- drivers-pci-vgaarb.c:warning:Value-stored-to-dev-during-its-initialization-is-never-read-clang-analyzer-deadcode.DeadStores |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-idle_task_exit |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_activate |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_deactivate |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_dying |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_starting |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_cpu_wait_empty |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-sched_init_smp |-- kernel-sched-core.c:warning:no-previous-prototype-for-function-task_sched_runtime |-- kernel-sched-fair.c:warning:no-previous-prototype-for-function-nohz_balance_enter_idle |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_remote |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_start |-- kernel-sched-loadavg.c:warning:no-previous-prototype-for-function-calc_load_nohz_stop `-- net-ipv4-tcp_input.c:warning:Value-stored-to-reason-is-never-read-clang-analyzer-deadcode.DeadStores elapsed time: 768m configs tested: 119 configs skipped: 4 gcc tested configs: arm allyesconfig arm defconfig arm allmodconfig arm64 allyesconfig arm64 defconfig um i386_defconfig um x86_64_defconfig mips allyesconfig riscv allyesconfig mips allmodconfig riscv allmodconfig i386 randconfig-c001 powerpc allmodconfig m68k allyesconfig s390 allmodconfig m68k allmodconfig powerpc allyesconfig s390 allyesconfig sparc allyesconfig sh allmodconfig xtensa allyesconfig h8300 allyesconfig parisc allyesconfig alpha allyesconfig arc allyesconfig nios2 allyesconfig m68k bvme6000_defconfig powerpc bamboo_defconfig sh se7724_defconfig arm corgi_defconfig sh ul2_defconfig powerpc holly_defconfig mips capcella_defconfig sparc alldefconfig sh ecovec24-romimage_defconfig arm clps711x_defconfig m68k m5208evb_defconfig riscv defconfig sh rsk7201_defconfig arm randconfig-c002-20220317 arm randconfig-c002-20220318 ia64 defconfig ia64 allmodconfig ia64 allyesconfig m68k defconfig nds32 allnoconfig nios2 defconfig csky defconfig alpha defconfig nds32 defconfig arc defconfig parisc defconfig parisc64 defconfig s390 defconfig i386 allyesconfig i386 debian-10.3 i386 debian-10.3-kselftests i386 defconfig sparc defconfig powerpc allnoconfig x86_64 randconfig-a006 x86_64 randconfig-a002 x86_64 randconfig-a004 i386 randconfig-a003 i386 randconfig-a001 i386 randconfig-a005 x86_64 randconfig-a015 x86_64 randconfig-a013 x86_64 randconfig-a011 i386 randconfig-a014 i386 randconfig-a012 i386 randconfig-a016 s390 randconfig-r044-20220317 arc randconfig-r043-20220318 riscv randconfig-r042-20220317 arc randconfig-r043-20220317 riscv nommu_k210_defconfig riscv nommu_virt_defconfig riscv allnoconfig riscv rv32_defconfig x86_64 rhel-8.3-kselftests x86_64 defconfig x86_64 kexec x86_64 rhel-8.3 x86_64 rhel-8.3-func x86_64 rhel-8.3-kunit x86_64 allyesconfig clang tested configs: arm randconfig-c002-20220318 x86_64 randconfig-c007 s390 randconfig-c005-20220317 s390 randconfig-c005-20220318 arm randconfig-c002-20220317 mips randconfig-c004-20220318 mips randconfig-c004-20220317 riscv randconfig-c006-20220318 powerpc randconfig-c003-20220318 powerpc randconfig-c003-20220317 i386 randconfig-c001 riscv randconfig-c006-20220317 arm netwinder_defconfig mips cu1830-neo_defconfig powerpc mpc836x_rdk_defconfig powerpc mpc512x_defconfig powerpc ebony_defconfig x86_64 randconfig-a001 x86_64 randconfig-a003 x86_64 randconfig-a005 i386 randconfig-a002 i386 randconfig-a006 i386 randconfig-a004 x86_64 randconfig-a014 x86_64 randconfig-a012 x86_64 randconfig-a016 i386 randconfig-a011 i386 randconfig-a013 i386 randconfig-a015 hexagon randconfig-r045-20220318 hexagon randconfig-r041-20220318 riscv randconfig-r042-20220318 hexagon randconfig-r041-20220317 s390 randconfig-r044-20220318 hexagon randconfig-r045-20220317 --- 0-DAY CI Kernel Test Service https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

1 0

[PATCH 00/64] media: Kconfig/Makefile reorg
by Mauro Carvalho Chehab 18 Mar '22

18 Mar '22

I opted to join two series and one separate patch on a single series, as they're related and one depends on the others: - Sort Makefiles and platform/Kconfig https://lore.kernel.org/linux-media/cover.1647155572.git.mchehab@kernel.org… - Organize media platform drivers per manufacturer https://lore.kernel.org/linux-media/20220313120002.0d782ce7@coco.lan/T/#t - https://lore.kernel.org/linux-media/Yi3ciCTbHrxYUatX@pendragon.ideasonboard… It basically sorts the main media Makefiles and reorganizes drivers/media/platform building system. Now, the entries there are organized per-vendor, and each per-vendor directory under drivers/media/platform contains its own Kconfig/Makefile. It should be noticed that I opted to not sort the manufacturer's Kconfig files on this series by purpose. After this series, the per-vendor Kconfig menus have only a few drivers (up to ~10 config symbols). That makes it a lot more manageable than what we had before when almost every platform driver config entry were on a single file. My current understaning is that the driver maintainers knows best how to better organize their Kconfig files, considering that: - the per-vendor driver order may not be in alphabetical order, as it may make sense to group drivers per type, platform and/or by its dependency chain; - It is now easy to sort the per-vendor entries alphabetically, either per config title or per Kconfig symbol; - Now that the main sort criteria is per-vendor, IMO it makes sense to define a per-vendor config space, like: config VIDEO_VNDR_bar ... config VIDEO_VNDR_foo ... config VIDEO_VNDR_foobar ... Regards, Mauro Mauro Carvalho Chehab (64): media: xc2028: rename the driver from tuner-xc2028 media: Makefiles: remove extra spaces media: Makefiles: sort entries where it fits media: platform: Makefile: reorganize its contents media: platform: move platform menu dependencies to drivers media: platform: place Aspeed driver on a separate dir media: platform: place NXP drivers on a separate dir media: platform: place Intel drivers on a separate dir media: platform: place Via drivers on a separate dir media: platform: place Renesas drivers on a separate dir media: platform: allegro-dvt: move config to its own file media: platform: amphion: move config to its own file media: platform: coda: move config to its own file media: platform: exynos-gsc: move config to its own file media: platform: ge2d: move config to its own file media: platform: mtk-jpeg: move config to its own file media: platform: mtk-mdp: move config to its own file media: platform: mtk-vcodec: move config to its own file media: platform: mtk-vpu: move config to its own file media: platform: omap3isp: move config to its own file media: platform: camss: move config to its own file media: platform: venus: move config to its own file media: platform: rga: move config to its own file media: platform: s3c-camif: move config to its own file media: platform: s5p-g2d: move config to its own file media: platform: hva: move config to its own file media: platform: stm32: move config to its own file media: platform: sun8i-di: move config to its own file media: platform: sun8i-rotate: move config to its own file media: platform: vde: move config to its own file media: platform: ti-vpe: move config to its own file media: platform: rkisp1: move config to its own file media: platform: delta: move config to its own file media: platform: bdisp: move config to its own file media: platform: s5p-mfc: move config to its own file media: platform: s5p-jpeg: move config to its own file media: platform: Kconfig: sort entries media: platform: move some manufacturer entries media: platform: Kconfig: place platform drivers on a submenu media: platform: rename coda/ to chips-media/ media: platform: rename marvell-ccic/ to marvell/ media: platform: rename meson/ge2d/ to amlogic/meson-ge2d/ media: platform: rename mtk-jpeg/ to mediatek/mtk-jpeg/ media: platform: rename mtk-mdp/ to mediatek/mtk-mdp/ media: platform: rename mtk-vcodec/ to mediatek/mtk-vcodec/ media: platform: rename mtk-vpu/ to mediatek/mtk-vpu/ media: platform: rename sunxi/ to allwinner/ media: platform: rename tegra/vde/ to nvidia/tegra-vde/ media: platform: rename amphion/ to nxp/amphion/ media: platform: rename exynos4-is/ to samsung/exynos4-is/ media: platform: rename exynos-gsc/ to samsung/exynos-gsc/ media: platform: rename s3c-camif/ to samsung/s3c-camif/ media: platform: rename s5p-g2d/ to samsung/s5p-g2d/ media: platform: rename s5p-jpeg/ to samsung/s5p-jpeg/ media: platform: rename s5p-mfc/ to samsung/s5p-mfc/ media: platform: rename stm32/ to sti/stm32/ media: platform: rename am437x/ to ti/am437x/ media: platform: rename davinci/ to ti/davinci/ media: platform: rename omap3isp/ to ti/omap3isp/ media: platform: rename omap/ to ti/omap/ media: platform: rename ti-vpe/ to ti/vpe/ media: platform: Create vendor/{Makefile,Kconfig} files media: platform/*/Kconfig: make manufacturer menus more uniform media: Kconfig: cleanup VIDEO_DEV dependencies Documentation/admin-guide/media/fimc.rst | 2 +- .../admin-guide/media/i2c-cardlist.rst | 2 +- Documentation/admin-guide/media/omap3isp.rst | 2 +- .../admin-guide/media/omap4_camera.rst | 2 +- .../media/drivers/davinci-vpbe-devel.rst | 20 +- .../driver-api/media/drivers/fimc-devel.rst | 14 +- Documentation/driver-api/media/v4l2-event.rst | 2 +- MAINTAINERS | 72 +- drivers/input/rmi4/Kconfig | 2 +- drivers/input/touchscreen/Kconfig | 4 +- drivers/media/Kconfig | 11 +- drivers/media/Makefile | 4 +- drivers/media/cec/platform/Makefile | 16 +- drivers/media/common/Makefile | 7 +- drivers/media/common/saa7146/Kconfig | 2 +- drivers/media/common/videobuf2/Makefile | 8 +- drivers/media/dvb-core/Kconfig | 2 +- drivers/media/dvb-frontends/Kconfig | 4 +- drivers/media/dvb-frontends/Makefile | 193 ++--- drivers/media/firewire/Makefile | 2 +- drivers/media/i2c/Kconfig | 250 +++--- drivers/media/i2c/Makefile | 92 +-- drivers/media/i2c/ccs/Kconfig | 2 +- drivers/media/i2c/cx25840/Kconfig | 2 +- drivers/media/i2c/et8ek8/Kconfig | 2 +- drivers/media/i2c/m5mols/Kconfig | 2 +- drivers/media/pci/Kconfig | 2 +- drivers/media/pci/Makefile | 22 +- drivers/media/pci/bt8xx/Kconfig | 2 +- drivers/media/pci/cobalt/Kconfig | 2 +- drivers/media/pci/cx18/Kconfig | 2 +- drivers/media/pci/cx18/cx18-driver.c | 2 +- drivers/media/pci/cx18/cx18-dvb.c | 2 +- drivers/media/pci/cx18/cx18-gpio.c | 2 +- drivers/media/pci/cx23885/cx23885-cards.c | 2 +- drivers/media/pci/cx23885/cx23885-dvb.c | 2 +- drivers/media/pci/cx23885/cx23885-video.c | 2 +- drivers/media/pci/cx88/cx88.h | 2 +- drivers/media/pci/dt3155/Kconfig | 2 +- drivers/media/pci/intel/ipu3/Kconfig | 2 +- drivers/media/pci/ivtv/Kconfig | 2 +- drivers/media/pci/ivtv/ivtv-driver.c | 2 +- drivers/media/pci/ivtv/ivtv-gpio.c | 2 +- drivers/media/pci/meye/Kconfig | 2 +- drivers/media/pci/saa7134/saa7134-cards.c | 2 +- drivers/media/pci/saa7134/saa7134-dvb.c | 2 +- drivers/media/pci/saa7146/Kconfig | 6 +- drivers/media/pci/sta2x11/Kconfig | 2 +- drivers/media/pci/tw5864/Kconfig | 2 +- drivers/media/pci/tw68/Kconfig | 2 +- drivers/media/pci/tw686x/Kconfig | 2 +- drivers/media/platform/Kconfig | 740 ++---------------- drivers/media/platform/Makefile | 113 +-- drivers/media/platform/allegro-dvt/Kconfig | 19 + drivers/media/platform/allwinner/Kconfig | 6 + .../platform/{sunxi => allwinner}/Makefile | 0 .../{sunxi => allwinner}/sun4i-csi/Kconfig | 3 +- .../{sunxi => allwinner}/sun4i-csi/Makefile | 0 .../sun4i-csi/sun4i_csi.c | 0 .../sun4i-csi/sun4i_csi.h | 0 .../sun4i-csi/sun4i_dma.c | 0 .../sun4i-csi/sun4i_v4l2.c | 0 .../{sunxi => allwinner}/sun6i-csi/Kconfig | 3 +- .../{sunxi => allwinner}/sun6i-csi/Makefile | 0 .../sun6i-csi/sun6i_csi.c | 0 .../sun6i-csi/sun6i_csi.h | 0 .../sun6i-csi/sun6i_csi_reg.h | 0 .../sun6i-csi/sun6i_video.c | 0 .../sun6i-csi/sun6i_video.h | 0 .../media/platform/allwinner/sun8i-di/Kconfig | 14 + .../{sunxi => allwinner}/sun8i-di/Makefile | 0 .../{sunxi => allwinner}/sun8i-di/sun8i-di.c | 0 .../{sunxi => allwinner}/sun8i-di/sun8i-di.h | 0 .../platform/allwinner/sun8i-rotate/Kconfig | 14 + .../sun8i-rotate/Makefile | 0 .../sun8i-rotate/sun8i-formats.h | 0 .../sun8i-rotate/sun8i-rotate.h | 0 .../sun8i-rotate/sun8i_formats.c | 0 .../sun8i-rotate/sun8i_rotate.c | 0 drivers/media/platform/amlogic/Kconfig | 5 + drivers/media/platform/amlogic/Makefile | 2 + .../media/platform/amlogic/meson-ge2d/Kconfig | 14 + .../ge2d => amlogic/meson-ge2d}/Makefile | 0 .../ge2d => amlogic/meson-ge2d}/ge2d-regs.h | 0 .../{meson/ge2d => amlogic/meson-ge2d}/ge2d.c | 0 drivers/media/platform/aspeed/Kconfig | 13 + drivers/media/platform/aspeed/Makefile | 2 + .../platform/{ => aspeed}/aspeed-video.c | 0 drivers/media/platform/atmel/Kconfig | 15 +- drivers/media/platform/cadence/Kconfig | 16 +- drivers/media/platform/chips-media/Kconfig | 20 + .../platform/{coda => chips-media}/Makefile | 0 .../platform/{coda => chips-media}/coda-bit.c | 0 .../{coda => chips-media}/coda-common.c | 0 .../platform/{coda => chips-media}/coda-gdi.c | 0 .../{coda => chips-media}/coda-h264.c | 0 .../{coda => chips-media}/coda-jpeg.c | 0 .../{coda => chips-media}/coda-mpeg2.c | 0 .../{coda => chips-media}/coda-mpeg4.c | 0 .../platform/{coda => chips-media}/coda.h | 0 .../{coda => chips-media}/coda_regs.h | 2 +- .../platform/{coda => chips-media}/imx-vdoa.c | 0 .../platform/{coda => chips-media}/imx-vdoa.h | 0 .../platform/{coda => chips-media}/trace.h | 2 +- drivers/media/platform/imx/Kconfig | 24 - drivers/media/platform/imx/Makefile | 1 - drivers/media/platform/intel/Kconfig | 14 + drivers/media/platform/intel/Makefile | 2 + .../media/platform/{ => intel}/pxa_camera.c | 0 .../{marvell-ccic => marvell}/Kconfig | 9 +- .../{marvell-ccic => marvell}/Makefile | 0 .../{marvell-ccic => marvell}/cafe-driver.c | 0 .../{marvell-ccic => marvell}/mcam-core.c | 0 .../{marvell-ccic => marvell}/mcam-core.h | 0 .../{marvell-ccic => marvell}/mmp-driver.c | 0 drivers/media/platform/mediatek/Kconfig | 8 + drivers/media/platform/mediatek/Makefile | 5 + .../media/platform/mediatek/mtk-jpeg/Kconfig | 16 + .../platform/{ => mediatek}/mtk-jpeg/Makefile | 0 .../{ => mediatek}/mtk-jpeg/mtk_jpeg_core.c | 0 .../{ => mediatek}/mtk-jpeg/mtk_jpeg_core.h | 0 .../{ => mediatek}/mtk-jpeg/mtk_jpeg_dec_hw.c | 0 .../{ => mediatek}/mtk-jpeg/mtk_jpeg_dec_hw.h | 0 .../mtk-jpeg/mtk_jpeg_dec_parse.c | 0 .../mtk-jpeg/mtk_jpeg_dec_parse.h | 0 .../mtk-jpeg/mtk_jpeg_dec_reg.h | 0 .../{ => mediatek}/mtk-jpeg/mtk_jpeg_enc_hw.c | 0 .../{ => mediatek}/mtk-jpeg/mtk_jpeg_enc_hw.h | 0 .../media/platform/mediatek/mtk-mdp/Kconfig | 17 + .../platform/{ => mediatek}/mtk-mdp/Makefile | 2 +- .../{ => mediatek}/mtk-mdp/mtk_mdp_comp.c | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_comp.h | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_core.c | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_core.h | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_ipi.h | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_m2m.c | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_m2m.h | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_regs.c | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_regs.h | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_vpu.c | 0 .../{ => mediatek}/mtk-mdp/mtk_mdp_vpu.h | 0 .../platform/mediatek/mtk-vcodec/Kconfig | 36 + .../{ => mediatek}/mtk-vcodec/Makefile | 0 .../mtk-vcodec/mtk_vcodec_dec.c | 0 .../mtk-vcodec/mtk_vcodec_dec.h | 0 .../mtk-vcodec/mtk_vcodec_dec_drv.c | 0 .../mtk-vcodec/mtk_vcodec_dec_hw.c | 0 .../mtk-vcodec/mtk_vcodec_dec_hw.h | 0 .../mtk-vcodec/mtk_vcodec_dec_pm.c | 0 .../mtk-vcodec/mtk_vcodec_dec_pm.h | 0 .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 0 .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 0 .../mtk-vcodec/mtk_vcodec_drv.h | 0 .../mtk-vcodec/mtk_vcodec_enc.c | 0 .../mtk-vcodec/mtk_vcodec_enc.h | 0 .../mtk-vcodec/mtk_vcodec_enc_drv.c | 0 .../mtk-vcodec/mtk_vcodec_enc_pm.c | 0 .../mtk-vcodec/mtk_vcodec_enc_pm.h | 0 .../{ => mediatek}/mtk-vcodec/mtk_vcodec_fw.c | 0 .../{ => mediatek}/mtk-vcodec/mtk_vcodec_fw.h | 0 .../mtk-vcodec/mtk_vcodec_fw_priv.h | 0 .../mtk-vcodec/mtk_vcodec_fw_scp.c | 0 .../mtk-vcodec/mtk_vcodec_fw_vpu.c | 0 .../mtk-vcodec/mtk_vcodec_intr.c | 0 .../mtk-vcodec/mtk_vcodec_intr.h | 0 .../mtk-vcodec/mtk_vcodec_util.c | 0 .../mtk-vcodec/mtk_vcodec_util.h | 0 .../mtk-vcodec/vdec/vdec_h264_if.c | 0 .../mtk-vcodec/vdec/vdec_h264_req_if.c | 0 .../mtk-vcodec/vdec/vdec_vp8_if.c | 0 .../mtk-vcodec/vdec/vdec_vp9_if.c | 0 .../{ => mediatek}/mtk-vcodec/vdec_drv_base.h | 0 .../{ => mediatek}/mtk-vcodec/vdec_drv_if.c | 0 .../{ => mediatek}/mtk-vcodec/vdec_drv_if.h | 0 .../{ => mediatek}/mtk-vcodec/vdec_ipi_msg.h | 0 .../mtk-vcodec/vdec_msg_queue.c | 0 .../mtk-vcodec/vdec_msg_queue.h | 0 .../{ => mediatek}/mtk-vcodec/vdec_vpu_if.c | 0 .../{ => mediatek}/mtk-vcodec/vdec_vpu_if.h | 0 .../mtk-vcodec/venc/venc_h264_if.c | 0 .../mtk-vcodec/venc/venc_vp8_if.c | 0 .../{ => mediatek}/mtk-vcodec/venc_drv_base.h | 0 .../{ => mediatek}/mtk-vcodec/venc_drv_if.c | 0 .../{ => mediatek}/mtk-vcodec/venc_drv_if.h | 0 .../{ => mediatek}/mtk-vcodec/venc_ipi_msg.h | 0 .../{ => mediatek}/mtk-vcodec/venc_vpu_if.c | 0 .../{ => mediatek}/mtk-vcodec/venc_vpu_if.h | 0 .../media/platform/mediatek/mtk-vpu/Kconfig | 15 + .../platform/{ => mediatek}/mtk-vpu/Makefile | 0 .../platform/{ => mediatek}/mtk-vpu/mtk_vpu.c | 0 .../platform/{ => mediatek}/mtk-vpu/mtk_vpu.h | 0 drivers/media/platform/nvidia/Kconfig | 5 + .../media/platform/nvidia/tegra-vde/Kconfig | 17 + .../{tegra/vde => nvidia/tegra-vde}/Makefile | 0 .../vde => nvidia/tegra-vde}/dmabuf-cache.c | 0 .../{tegra/vde => nvidia/tegra-vde}/h264.c | 0 .../{tegra/vde => nvidia/tegra-vde}/iommu.c | 0 .../{tegra/vde => nvidia/tegra-vde}/trace.h | 2 +- .../{tegra/vde => nvidia/tegra-vde}/v4l2.c | 0 .../{tegra/vde => nvidia/tegra-vde}/vde.c | 0 .../{tegra/vde => nvidia/tegra-vde}/vde.h | 0 drivers/media/platform/nxp/Kconfig | 55 ++ drivers/media/platform/nxp/Makefile | 9 + drivers/media/platform/nxp/amphion/Kconfig | 21 + .../media/platform/{ => nxp}/amphion/Makefile | 0 .../media/platform/{ => nxp}/amphion/vdec.c | 0 .../media/platform/{ => nxp}/amphion/venc.c | 0 .../media/platform/{ => nxp}/amphion/vpu.h | 0 .../platform/{ => nxp}/amphion/vpu_cmds.c | 0 .../platform/{ => nxp}/amphion/vpu_cmds.h | 0 .../platform/{ => nxp}/amphion/vpu_codec.h | 0 .../platform/{ => nxp}/amphion/vpu_color.c | 0 .../platform/{ => nxp}/amphion/vpu_core.c | 0 .../platform/{ => nxp}/amphion/vpu_core.h | 0 .../platform/{ => nxp}/amphion/vpu_dbg.c | 0 .../platform/{ => nxp}/amphion/vpu_defs.h | 0 .../platform/{ => nxp}/amphion/vpu_drv.c | 0 .../platform/{ => nxp}/amphion/vpu_helpers.c | 0 .../platform/{ => nxp}/amphion/vpu_helpers.h | 0 .../platform/{ => nxp}/amphion/vpu_imx8q.c | 0 .../platform/{ => nxp}/amphion/vpu_imx8q.h | 0 .../platform/{ => nxp}/amphion/vpu_malone.c | 0 .../platform/{ => nxp}/amphion/vpu_malone.h | 0 .../platform/{ => nxp}/amphion/vpu_mbox.c | 0 .../platform/{ => nxp}/amphion/vpu_mbox.h | 0 .../platform/{ => nxp}/amphion/vpu_msgs.c | 0 .../platform/{ => nxp}/amphion/vpu_msgs.h | 0 .../platform/{ => nxp}/amphion/vpu_rpc.c | 0 .../platform/{ => nxp}/amphion/vpu_rpc.h | 0 .../platform/{ => nxp}/amphion/vpu_v4l2.c | 0 .../platform/{ => nxp}/amphion/vpu_v4l2.h | 0 .../platform/{ => nxp}/amphion/vpu_windsor.c | 0 .../platform/{ => nxp}/amphion/vpu_windsor.h | 0 drivers/media/platform/{ => nxp}/fsl-viu.c | 0 .../media/platform/{ => nxp}/imx-jpeg/Kconfig | 3 +- .../platform/{ => nxp}/imx-jpeg/Makefile | 0 .../platform/{ => nxp}/imx-jpeg/mxc-jpeg-hw.c | 0 .../platform/{ => nxp}/imx-jpeg/mxc-jpeg-hw.h | 0 .../platform/{ => nxp}/imx-jpeg/mxc-jpeg.c | 2 +- .../platform/{ => nxp}/imx-jpeg/mxc-jpeg.h | 0 .../platform/{imx => nxp}/imx-mipi-csis.c | 0 drivers/media/platform/{ => nxp}/imx-pxp.c | 0 drivers/media/platform/{ => nxp}/imx-pxp.h | 0 .../media/platform/{ => nxp}/mx2_emmaprp.c | 0 drivers/media/platform/qcom/Kconfig | 6 + drivers/media/platform/qcom/Makefile | 3 + drivers/media/platform/qcom/camss/Kconfig | 9 + drivers/media/platform/qcom/venus/Kconfig | 14 + drivers/media/platform/renesas/Kconfig | 121 +++ drivers/media/platform/renesas/Makefile | 15 + .../media/platform/{ => renesas}/rcar-fcp.c | 0 .../media/platform/{ => renesas}/rcar-isp.c | 0 .../platform/{ => renesas}/rcar-vin/Kconfig | 6 +- .../platform/{ => renesas}/rcar-vin/Makefile | 0 .../{ => renesas}/rcar-vin/rcar-core.c | 0 .../{ => renesas}/rcar-vin/rcar-csi2.c | 0 .../{ => renesas}/rcar-vin/rcar-dma.c | 0 .../{ => renesas}/rcar-vin/rcar-v4l2.c | 0 .../{ => renesas}/rcar-vin/rcar-vin.h | 0 .../media/platform/{ => renesas}/rcar_drif.c | 0 .../media/platform/{ => renesas}/rcar_fdp1.c | 0 .../media/platform/{ => renesas}/rcar_jpu.c | 2 +- .../platform/{ => renesas}/renesas-ceu.c | 0 drivers/media/platform/{ => renesas}/sh_vou.c | 0 .../platform/{ => renesas}/vsp1/Makefile | 0 .../media/platform/{ => renesas}/vsp1/vsp1.h | 0 .../platform/{ => renesas}/vsp1/vsp1_brx.c | 0 .../platform/{ => renesas}/vsp1/vsp1_brx.h | 0 .../platform/{ => renesas}/vsp1/vsp1_clu.c | 0 .../platform/{ => renesas}/vsp1/vsp1_clu.h | 0 .../platform/{ => renesas}/vsp1/vsp1_dl.c | 0 .../platform/{ => renesas}/vsp1/vsp1_dl.h | 0 .../platform/{ => renesas}/vsp1/vsp1_drm.c | 0 .../platform/{ => renesas}/vsp1/vsp1_drm.h | 0 .../platform/{ => renesas}/vsp1/vsp1_drv.c | 0 .../platform/{ => renesas}/vsp1/vsp1_entity.c | 0 .../platform/{ => renesas}/vsp1/vsp1_entity.h | 0 .../platform/{ => renesas}/vsp1/vsp1_hgo.c | 0 .../platform/{ => renesas}/vsp1/vsp1_hgo.h | 0 .../platform/{ => renesas}/vsp1/vsp1_hgt.c | 0 .../platform/{ => renesas}/vsp1/vsp1_hgt.h | 0 .../platform/{ => renesas}/vsp1/vsp1_histo.c | 0 .../platform/{ => renesas}/vsp1/vsp1_histo.h | 0 .../platform/{ => renesas}/vsp1/vsp1_hsit.c | 0 .../platform/{ => renesas}/vsp1/vsp1_hsit.h | 0 .../platform/{ => renesas}/vsp1/vsp1_lif.c | 0 .../platform/{ => renesas}/vsp1/vsp1_lif.h | 0 .../platform/{ => renesas}/vsp1/vsp1_lut.c | 0 .../platform/{ => renesas}/vsp1/vsp1_lut.h | 0 .../platform/{ => renesas}/vsp1/vsp1_pipe.c | 0 .../platform/{ => renesas}/vsp1/vsp1_pipe.h | 0 .../platform/{ => renesas}/vsp1/vsp1_regs.h | 0 .../platform/{ => renesas}/vsp1/vsp1_rpf.c | 0 .../platform/{ => renesas}/vsp1/vsp1_rwpf.c | 0 .../platform/{ => renesas}/vsp1/vsp1_rwpf.h | 0 .../platform/{ => renesas}/vsp1/vsp1_sru.c | 0 .../platform/{ => renesas}/vsp1/vsp1_sru.h | 0 .../platform/{ => renesas}/vsp1/vsp1_uds.c | 0 .../platform/{ => renesas}/vsp1/vsp1_uds.h | 0 .../platform/{ => renesas}/vsp1/vsp1_uif.c | 0 .../platform/{ => renesas}/vsp1/vsp1_uif.h | 0 .../platform/{ => renesas}/vsp1/vsp1_video.c | 0 .../platform/{ => renesas}/vsp1/vsp1_video.h | 0 .../platform/{ => renesas}/vsp1/vsp1_wpf.c | 0 drivers/media/platform/rockchip/Kconfig | 6 + drivers/media/platform/rockchip/Makefile | 3 + drivers/media/platform/rockchip/rga/Kconfig | 14 + .../media/platform/rockchip/rkisp1/Kconfig | 19 + drivers/media/platform/samsung/Kconfig | 10 + drivers/media/platform/samsung/Makefile | 7 + .../media/platform/samsung/exynos-gsc/Kconfig | 10 + .../{ => samsung}/exynos-gsc/Makefile | 0 .../{ => samsung}/exynos-gsc/gsc-core.c | 0 .../{ => samsung}/exynos-gsc/gsc-core.h | 0 .../{ => samsung}/exynos-gsc/gsc-m2m.c | 0 .../{ => samsung}/exynos-gsc/gsc-regs.c | 0 .../{ => samsung}/exynos-gsc/gsc-regs.h | 0 .../platform/{ => samsung}/exynos4-is/Kconfig | 3 +- .../{ => samsung}/exynos4-is/Makefile | 0 .../{ => samsung}/exynos4-is/common.c | 0 .../{ => samsung}/exynos4-is/common.h | 0 .../{ => samsung}/exynos4-is/fimc-capture.c | 0 .../{ => samsung}/exynos4-is/fimc-core.c | 0 .../{ => samsung}/exynos4-is/fimc-core.h | 0 .../exynos4-is/fimc-is-command.h | 0 .../{ => samsung}/exynos4-is/fimc-is-errno.c | 0 .../{ => samsung}/exynos4-is/fimc-is-errno.h | 0 .../{ => samsung}/exynos4-is/fimc-is-i2c.c | 0 .../{ => samsung}/exynos4-is/fimc-is-i2c.h | 0 .../{ => samsung}/exynos4-is/fimc-is-param.c | 0 .../{ => samsung}/exynos4-is/fimc-is-param.h | 0 .../{ => samsung}/exynos4-is/fimc-is-regs.c | 0 .../{ => samsung}/exynos4-is/fimc-is-regs.h | 0 .../{ => samsung}/exynos4-is/fimc-is-sensor.c | 0 .../{ => samsung}/exynos4-is/fimc-is-sensor.h | 0 .../{ => samsung}/exynos4-is/fimc-is.c | 0 .../{ => samsung}/exynos4-is/fimc-is.h | 0 .../{ => samsung}/exynos4-is/fimc-isp-video.c | 0 .../{ => samsung}/exynos4-is/fimc-isp-video.h | 0 .../{ => samsung}/exynos4-is/fimc-isp.c | 0 .../{ => samsung}/exynos4-is/fimc-isp.h | 0 .../{ => samsung}/exynos4-is/fimc-lite-reg.c | 0 .../{ => samsung}/exynos4-is/fimc-lite-reg.h | 0 .../{ => samsung}/exynos4-is/fimc-lite.c | 0 .../{ => samsung}/exynos4-is/fimc-lite.h | 0 .../{ => samsung}/exynos4-is/fimc-m2m.c | 0 .../{ => samsung}/exynos4-is/fimc-reg.c | 0 .../{ => samsung}/exynos4-is/fimc-reg.h | 0 .../{ => samsung}/exynos4-is/media-dev.c | 0 .../{ => samsung}/exynos4-is/media-dev.h | 0 .../{ => samsung}/exynos4-is/mipi-csis.c | 0 .../{ => samsung}/exynos4-is/mipi-csis.h | 0 .../media/platform/samsung/s3c-camif/Kconfig | 15 + .../platform/{ => samsung}/s3c-camif/Makefile | 0 .../{ => samsung}/s3c-camif/camif-capture.c | 0 .../{ => samsung}/s3c-camif/camif-core.c | 0 .../{ => samsung}/s3c-camif/camif-core.h | 0 .../{ => samsung}/s3c-camif/camif-regs.c | 0 .../{ => samsung}/s3c-camif/camif-regs.h | 0 .../media/platform/samsung/s5p-g2d/Kconfig | 11 + .../platform/{ => samsung}/s5p-g2d/Makefile | 0 .../platform/{ => samsung}/s5p-g2d/g2d-hw.c | 0 .../platform/{ => samsung}/s5p-g2d/g2d-regs.h | 0 .../platform/{ => samsung}/s5p-g2d/g2d.c | 0 .../platform/{ => samsung}/s5p-g2d/g2d.h | 0 .../media/platform/samsung/s5p-jpeg/Kconfig | 12 + .../platform/{ => samsung}/s5p-jpeg/Makefile | 0 .../{ => samsung}/s5p-jpeg/jpeg-core.c | 2 +- .../{ => samsung}/s5p-jpeg/jpeg-core.h | 2 +- .../s5p-jpeg/jpeg-hw-exynos3250.c | 0 .../s5p-jpeg/jpeg-hw-exynos3250.h | 2 +- .../{ => samsung}/s5p-jpeg/jpeg-hw-exynos4.c | 0 .../{ => samsung}/s5p-jpeg/jpeg-hw-exynos4.h | 0 .../{ => samsung}/s5p-jpeg/jpeg-hw-s5p.c | 2 +- .../{ => samsung}/s5p-jpeg/jpeg-hw-s5p.h | 2 +- .../{ => samsung}/s5p-jpeg/jpeg-regs.h | 2 +- .../media/platform/samsung/s5p-mfc/Kconfig | 9 + .../platform/{ => samsung}/s5p-mfc/Makefile | 0 .../{ => samsung}/s5p-mfc/regs-mfc-v10.h | 0 .../{ => samsung}/s5p-mfc/regs-mfc-v6.h | 0 .../{ => samsung}/s5p-mfc/regs-mfc-v7.h | 0 .../{ => samsung}/s5p-mfc/regs-mfc-v8.h | 0 .../platform/{ => samsung}/s5p-mfc/regs-mfc.h | 0 .../platform/{ => samsung}/s5p-mfc/s5p_mfc.c | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_cmd.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd_v5.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd_v5.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd_v6.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd_v6.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_common.h | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_ctrl.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_ctrl.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_debug.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_dec.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_dec.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_enc.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_enc.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_intr.c | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_intr.h | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_iommu.h | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_opr.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_opr.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_opr_v5.c | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_opr_v5.h | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_opr_v6.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_opr_v6.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_pm.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_pm.h | 2 +- drivers/media/platform/sti/Kconfig | 9 + drivers/media/platform/sti/Makefile | 6 + drivers/media/platform/sti/bdisp/Kconfig | 10 + drivers/media/platform/sti/c8sectpfe/Kconfig | 1 + drivers/media/platform/sti/delta/Kconfig | 36 + drivers/media/platform/sti/hva/Kconfig | 26 + drivers/media/platform/sti/stm32/Kconfig | 31 + .../media/platform/{ => sti}/stm32/Makefile | 0 .../platform/{ => sti}/stm32/dma2d/dma2d-hw.c | 0 .../{ => sti}/stm32/dma2d/dma2d-regs.h | 0 .../platform/{ => sti}/stm32/dma2d/dma2d.c | 0 .../platform/{ => sti}/stm32/dma2d/dma2d.h | 0 .../platform/{ => sti}/stm32/stm32-dcmi.c | 0 drivers/media/platform/sunxi/Kconfig | 4 - drivers/media/platform/ti/Kconfig | 9 + drivers/media/platform/ti/Makefile | 6 + .../media/platform/{ => ti}/am437x/Kconfig | 3 +- .../media/platform/{ => ti}/am437x/Makefile | 0 .../platform/{ => ti}/am437x/am437x-vpfe.c | 0 .../platform/{ => ti}/am437x/am437x-vpfe.h | 0 .../{ => ti}/am437x/am437x-vpfe_regs.h | 0 .../media/platform/{ => ti}/davinci/Kconfig | 18 +- .../media/platform/{ => ti}/davinci/Makefile | 0 .../{ => ti}/davinci/ccdc_hw_device.h | 0 .../platform/{ => ti}/davinci/dm355_ccdc.c | 0 .../{ => ti}/davinci/dm355_ccdc_regs.h | 0 .../platform/{ => ti}/davinci/dm644x_ccdc.c | 0 .../{ => ti}/davinci/dm644x_ccdc_regs.h | 0 .../media/platform/{ => ti}/davinci/isif.c | 0 .../platform/{ => ti}/davinci/isif_regs.h | 0 .../media/platform/{ => ti}/davinci/vpbe.c | 0 .../platform/{ => ti}/davinci/vpbe_display.c | 0 .../platform/{ => ti}/davinci/vpbe_osd.c | 0 .../platform/{ => ti}/davinci/vpbe_osd_regs.h | 0 .../platform/{ => ti}/davinci/vpbe_venc.c | 0 .../{ => ti}/davinci/vpbe_venc_regs.h | 0 .../platform/{ => ti}/davinci/vpfe_capture.c | 0 .../media/platform/{ => ti}/davinci/vpif.c | 0 .../media/platform/{ => ti}/davinci/vpif.h | 0 .../platform/{ => ti}/davinci/vpif_capture.c | 0 .../platform/{ => ti}/davinci/vpif_capture.h | 0 .../platform/{ => ti}/davinci/vpif_display.c | 0 .../platform/{ => ti}/davinci/vpif_display.h | 0 .../media/platform/{ => ti}/davinci/vpss.c | 0 drivers/media/platform/{ => ti}/omap/Kconfig | 3 +- drivers/media/platform/{ => ti}/omap/Makefile | 0 .../media/platform/{ => ti}/omap/omap_vout.c | 0 .../platform/{ => ti}/omap/omap_vout_vrfb.c | 0 .../platform/{ => ti}/omap/omap_vout_vrfb.h | 0 .../platform/{ => ti}/omap/omap_voutdef.h | 0 .../platform/{ => ti}/omap/omap_voutlib.c | 0 .../platform/{ => ti}/omap/omap_voutlib.h | 0 drivers/media/platform/ti/omap3isp/Kconfig | 21 + .../media/platform/{ => ti}/omap3isp/Makefile | 0 .../{ => ti}/omap3isp/cfa_coef_table.h | 0 .../platform/{ => ti}/omap3isp/gamma_table.h | 0 .../media/platform/{ => ti}/omap3isp/isp.c | 0 .../media/platform/{ => ti}/omap3isp/isp.h | 0 .../platform/{ => ti}/omap3isp/ispccdc.c | 0 .../platform/{ => ti}/omap3isp/ispccdc.h | 0 .../platform/{ => ti}/omap3isp/ispccp2.c | 0 .../platform/{ => ti}/omap3isp/ispccp2.h | 0 .../platform/{ => ti}/omap3isp/ispcsi2.c | 0 .../platform/{ => ti}/omap3isp/ispcsi2.h | 0 .../platform/{ => ti}/omap3isp/ispcsiphy.c | 0 .../platform/{ => ti}/omap3isp/ispcsiphy.h | 0 .../media/platform/{ => ti}/omap3isp/isph3a.h | 0 .../platform/{ => ti}/omap3isp/isph3a_aewb.c | 0 .../platform/{ => ti}/omap3isp/isph3a_af.c | 0 .../platform/{ => ti}/omap3isp/isphist.c | 0 .../platform/{ => ti}/omap3isp/isphist.h | 0 .../platform/{ => ti}/omap3isp/isppreview.c | 0 .../platform/{ => ti}/omap3isp/isppreview.h | 0 .../media/platform/{ => ti}/omap3isp/ispreg.h | 0 .../platform/{ => ti}/omap3isp/ispresizer.c | 0 .../platform/{ => ti}/omap3isp/ispresizer.h | 0 .../platform/{ => ti}/omap3isp/ispstat.c | 0 .../platform/{ => ti}/omap3isp/ispstat.h | 0 .../platform/{ => ti}/omap3isp/ispvideo.c | 0 .../platform/{ => ti}/omap3isp/ispvideo.h | 0 .../{ => ti}/omap3isp/luma_enhance_table.h | 0 .../{ => ti}/omap3isp/noise_filter_table.h | 0 .../platform/{ => ti}/omap3isp/omap3isp.h | 0 drivers/media/platform/ti/vpe/Kconfig | 62 ++ .../platform/{ti-vpe => ti/vpe}/Makefile | 0 .../{ti-vpe => ti/vpe}/cal-camerarx.c | 0 .../platform/{ti-vpe => ti/vpe}/cal-video.c | 0 .../media/platform/{ti-vpe => ti/vpe}/cal.c | 0 .../media/platform/{ti-vpe => ti/vpe}/cal.h | 0 .../platform/{ti-vpe => ti/vpe}/cal_regs.h | 0 .../media/platform/{ti-vpe => ti/vpe}/csc.c | 0 .../media/platform/{ti-vpe => ti/vpe}/csc.h | 0 .../media/platform/{ti-vpe => ti/vpe}/sc.c | 0 .../media/platform/{ti-vpe => ti/vpe}/sc.h | 0 .../platform/{ti-vpe => ti/vpe}/sc_coeff.h | 0 .../media/platform/{ti-vpe => ti/vpe}/vpdma.c | 0 .../media/platform/{ti-vpe => ti/vpe}/vpdma.h | 0 .../platform/{ti-vpe => ti/vpe}/vpdma_priv.h | 0 .../media/platform/{ti-vpe => ti/vpe}/vpe.c | 0 .../platform/{ti-vpe => ti/vpe}/vpe_regs.h | 0 drivers/media/platform/via/Kconfig | 14 + drivers/media/platform/via/Makefile | 2 + drivers/media/platform/{ => via}/via-camera.c | 0 drivers/media/platform/{ => via}/via-camera.h | 0 drivers/media/platform/xilinx/Kconfig | 10 +- drivers/media/radio/Kconfig | 54 +- drivers/media/radio/Makefile | 43 +- drivers/media/radio/si470x/Kconfig | 2 +- drivers/media/radio/wl128x/Kconfig | 2 +- drivers/media/rc/Makefile | 47 +- drivers/media/rc/keymaps/Makefile | 34 +- drivers/media/spi/Kconfig | 4 +- drivers/media/spi/Makefile | 7 +- drivers/media/test-drivers/Kconfig | 2 +- drivers/media/test-drivers/Makefile | 14 +- drivers/media/test-drivers/vicodec/Kconfig | 2 +- drivers/media/test-drivers/vimc/Kconfig | 2 +- drivers/media/test-drivers/vivid/Kconfig | 2 +- drivers/media/tuners/Kconfig | 6 +- drivers/media/tuners/Makefile | 66 +- drivers/media/tuners/e4000.c | 6 +- drivers/media/tuners/fc2580.c | 6 +- drivers/media/tuners/tuner-types.c | 2 +- .../{tuner-xc2028-types.h => xc2028-types.h} | 6 +- .../media/tuners/{tuner-xc2028.c => xc2028.c} | 6 +- .../media/tuners/{tuner-xc2028.h => xc2028.h} | 2 +- drivers/media/tuners/xc4000.c | 2 +- drivers/media/usb/Makefile | 40 +- drivers/media/usb/airspy/Kconfig | 2 +- drivers/media/usb/au0828/Kconfig | 6 +- drivers/media/usb/cpia2/Kconfig | 2 +- drivers/media/usb/dvb-usb-v2/Kconfig | 8 +- drivers/media/usb/dvb-usb/Kconfig | 4 +- drivers/media/usb/dvb-usb/cxusb.c | 2 +- drivers/media/usb/dvb-usb/dib0700_devices.c | 2 +- drivers/media/usb/em28xx/em28xx-i2c.c | 2 +- drivers/media/usb/em28xx/em28xx.h | 2 +- drivers/media/usb/gspca/Kconfig | 96 +-- drivers/media/usb/gspca/Makefile | 88 +-- drivers/media/usb/gspca/gl860/Kconfig | 2 +- drivers/media/usb/gspca/m5602/Kconfig | 2 +- drivers/media/usb/hackrf/Kconfig | 2 +- drivers/media/usb/hdpvr/Kconfig | 2 +- drivers/media/usb/msi2500/Kconfig | 2 +- drivers/media/usb/pvrusb2/Kconfig | 2 +- drivers/media/usb/pwc/Kconfig | 2 +- drivers/media/usb/s2255/Kconfig | 2 +- drivers/media/usb/stkwebcam/Kconfig | 2 +- drivers/media/usb/tm6000/tm6000-cards.c | 2 +- drivers/media/usb/tm6000/tm6000-dvb.c | 2 +- drivers/media/usb/tm6000/tm6000-i2c.c | 2 +- drivers/media/usb/usbtv/Kconfig | 2 +- drivers/media/usb/uvc/Kconfig | 2 +- drivers/media/usb/zr364xx/Kconfig | 2 +- drivers/media/v4l2-core/Kconfig | 12 +- drivers/media/v4l2-core/Makefile | 34 +- drivers/media/v4l2-core/tuner-core.c | 2 +- drivers/staging/media/atomisp/Kconfig | 2 +- drivers/staging/media/atomisp/i2c/Kconfig | 14 +- drivers/staging/media/hantro/Kconfig | 2 +- drivers/staging/media/imx/Kconfig | 2 +- drivers/staging/media/ipu3/Kconfig | 2 +- drivers/staging/media/max96712/Kconfig | 2 +- drivers/staging/media/meson/vdec/Kconfig | 2 +- drivers/staging/media/omap4iss/Kconfig | 2 +- drivers/staging/media/rkvdec/Kconfig | 2 +- drivers/staging/media/sunxi/cedrus/Kconfig | 2 +- drivers/staging/media/tegra-video/Kconfig | 2 +- drivers/staging/media/zoran/Kconfig | 2 +- drivers/staging/most/video/Kconfig | 2 +- .../vc04_services/bcm2835-camera/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 2 +- drivers/usb/gadget/legacy/Kconfig | 2 +- sound/pci/Kconfig | 4 +- 583 files changed, 1778 insertions(+), 1596 deletions(-) create mode 100644 drivers/media/platform/allegro-dvt/Kconfig create mode 100644 drivers/media/platform/allwinner/Kconfig rename drivers/media/platform/{sunxi => allwinner}/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/Kconfig (83%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/sun4i_csi.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/sun4i_csi.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/sun4i_dma.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/sun4i_v4l2.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/Kconfig (81%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_csi.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_csi.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_csi_reg.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_video.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_video.h (100%) create mode 100644 drivers/media/platform/allwinner/sun8i-di/Kconfig rename drivers/media/platform/{sunxi => allwinner}/sun8i-di/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-di/sun8i-di.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-di/sun8i-di.h (100%) create mode 100644 drivers/media/platform/allwinner/sun8i-rotate/Kconfig rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/sun8i-formats.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/sun8i-rotate.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/sun8i_formats.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/sun8i_rotate.c (100%) create mode 100644 drivers/media/platform/amlogic/Kconfig create mode 100644 drivers/media/platform/amlogic/Makefile create mode 100644 drivers/media/platform/amlogic/meson-ge2d/Kconfig rename drivers/media/platform/{meson/ge2d => amlogic/meson-ge2d}/Makefile (100%) rename drivers/media/platform/{meson/ge2d => amlogic/meson-ge2d}/ge2d-regs.h (100%) rename drivers/media/platform/{meson/ge2d => amlogic/meson-ge2d}/ge2d.c (100%) create mode 100644 drivers/media/platform/aspeed/Kconfig create mode 100644 drivers/media/platform/aspeed/Makefile rename drivers/media/platform/{ => aspeed}/aspeed-video.c (100%) create mode 100644 drivers/media/platform/chips-media/Kconfig rename drivers/media/platform/{coda => chips-media}/Makefile (100%) rename drivers/media/platform/{coda => chips-media}/coda-bit.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-common.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-gdi.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-h264.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-jpeg.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-mpeg2.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-mpeg4.c (100%) rename drivers/media/platform/{coda => chips-media}/coda.h (100%) rename drivers/media/platform/{coda => chips-media}/coda_regs.h (99%) rename drivers/media/platform/{coda => chips-media}/imx-vdoa.c (100%) rename drivers/media/platform/{coda => chips-media}/imx-vdoa.h (100%) rename drivers/media/platform/{coda => chips-media}/trace.h (98%) delete mode 100644 drivers/media/platform/imx/Kconfig delete mode 100644 drivers/media/platform/imx/Makefile create mode 100644 drivers/media/platform/intel/Kconfig create mode 100644 drivers/media/platform/intel/Makefile rename drivers/media/platform/{ => intel}/pxa_camera.c (100%) rename drivers/media/platform/{marvell-ccic => marvell}/Kconfig (85%) rename drivers/media/platform/{marvell-ccic => marvell}/Makefile (100%) rename drivers/media/platform/{marvell-ccic => marvell}/cafe-driver.c (100%) rename drivers/media/platform/{marvell-ccic => marvell}/mcam-core.c (100%) rename drivers/media/platform/{marvell-ccic => marvell}/mcam-core.h (100%) rename drivers/media/platform/{marvell-ccic => marvell}/mmp-driver.c (100%) create mode 100644 drivers/media/platform/mediatek/Kconfig create mode 100644 drivers/media/platform/mediatek/Makefile create mode 100644 drivers/media/platform/mediatek/mtk-jpeg/Kconfig rename drivers/media/platform/{ => mediatek}/mtk-jpeg/Makefile (100%) rename drivers/media/platform/{ => mediatek}/mtk-jpeg/mtk_jpeg_core.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-jpeg/mtk_jpeg_core.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-jpeg/mtk_jpeg_dec_hw.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-jpeg/mtk_jpeg_dec_hw.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-jpeg/mtk_jpeg_dec_parse.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-jpeg/mtk_jpeg_dec_parse.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-jpeg/mtk_jpeg_dec_reg.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-jpeg/mtk_jpeg_enc_hw.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-jpeg/mtk_jpeg_enc_hw.h (100%) create mode 100644 drivers/media/platform/mediatek/mtk-mdp/Kconfig rename drivers/media/platform/{ => mediatek}/mtk-mdp/Makefile (77%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_comp.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_comp.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_core.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_core.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_ipi.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_m2m.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_m2m.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_regs.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_regs.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_vpu.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-mdp/mtk_mdp_vpu.h (100%) create mode 100644 drivers/media/platform/mediatek/mtk-vcodec/Kconfig rename drivers/media/platform/{ => mediatek}/mtk-vcodec/Makefile (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_dec.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_dec.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_dec_drv.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_dec_hw.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_dec_hw.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_dec_pm.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_dec_pm.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_dec_stateful.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_dec_stateless.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_drv.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_enc.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_enc.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_enc_drv.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_enc_pm.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_enc_pm.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_fw.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_fw.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_fw_priv.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_fw_scp.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_fw_vpu.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_intr.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_intr.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_util.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/mtk_vcodec_util.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec/vdec_h264_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec/vdec_h264_req_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec/vdec_vp8_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec/vdec_vp9_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec_drv_base.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec_drv_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec_drv_if.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec_ipi_msg.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec_msg_queue.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec_msg_queue.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec_vpu_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/vdec_vpu_if.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/venc/venc_h264_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/venc/venc_vp8_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/venc_drv_base.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/venc_drv_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/venc_drv_if.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/venc_ipi_msg.h (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/venc_vpu_if.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vcodec/venc_vpu_if.h (100%) create mode 100644 drivers/media/platform/mediatek/mtk-vpu/Kconfig rename drivers/media/platform/{ => mediatek}/mtk-vpu/Makefile (100%) rename drivers/media/platform/{ => mediatek}/mtk-vpu/mtk_vpu.c (100%) rename drivers/media/platform/{ => mediatek}/mtk-vpu/mtk_vpu.h (100%) create mode 100644 drivers/media/platform/nvidia/Kconfig create mode 100644 drivers/media/platform/nvidia/tegra-vde/Kconfig rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/Makefile (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/dmabuf-cache.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/h264.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/iommu.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/trace.h (97%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/v4l2.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/vde.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/vde.h (100%) create mode 100644 drivers/media/platform/nxp/Kconfig create mode 100644 drivers/media/platform/nxp/Makefile create mode 100644 drivers/media/platform/nxp/amphion/Kconfig rename drivers/media/platform/{ => nxp}/amphion/Makefile (100%) rename drivers/media/platform/{ => nxp}/amphion/vdec.c (100%) rename drivers/media/platform/{ => nxp}/amphion/venc.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_cmds.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_cmds.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_codec.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_color.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_core.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_core.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_dbg.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_defs.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_drv.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_helpers.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_helpers.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_imx8q.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_imx8q.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_malone.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_malone.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_mbox.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_mbox.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_msgs.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_msgs.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_rpc.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_rpc.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_v4l2.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_v4l2.h (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_windsor.c (100%) rename drivers/media/platform/{ => nxp}/amphion/vpu_windsor.h (100%) rename drivers/media/platform/{ => nxp}/fsl-viu.c (100%) rename drivers/media/platform/{ => nxp}/imx-jpeg/Kconfig (85%) rename drivers/media/platform/{ => nxp}/imx-jpeg/Makefile (100%) rename drivers/media/platform/{ => nxp}/imx-jpeg/mxc-jpeg-hw.c (100%) rename drivers/media/platform/{ => nxp}/imx-jpeg/mxc-jpeg-hw.h (100%) rename drivers/media/platform/{ => nxp}/imx-jpeg/mxc-jpeg.c (99%) rename drivers/media/platform/{ => nxp}/imx-jpeg/mxc-jpeg.h (100%) rename drivers/media/platform/{imx => nxp}/imx-mipi-csis.c (100%) rename drivers/media/platform/{ => nxp}/imx-pxp.c (100%) rename drivers/media/platform/{ => nxp}/imx-pxp.h (100%) rename drivers/media/platform/{ => nxp}/mx2_emmaprp.c (100%) create mode 100644 drivers/media/platform/qcom/Kconfig create mode 100644 drivers/media/platform/qcom/Makefile create mode 100644 drivers/media/platform/qcom/camss/Kconfig create mode 100644 drivers/media/platform/qcom/venus/Kconfig create mode 100644 drivers/media/platform/renesas/Kconfig create mode 100644 drivers/media/platform/renesas/Makefile rename drivers/media/platform/{ => renesas}/rcar-fcp.c (100%) rename drivers/media/platform/{ => renesas}/rcar-isp.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/Kconfig (87%) rename drivers/media/platform/{ => renesas}/rcar-vin/Makefile (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-core.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-csi2.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-dma.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-v4l2.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-vin.h (100%) rename drivers/media/platform/{ => renesas}/rcar_drif.c (100%) rename drivers/media/platform/{ => renesas}/rcar_fdp1.c (100%) rename drivers/media/platform/{ => renesas}/rcar_jpu.c (99%) rename drivers/media/platform/{ => renesas}/renesas-ceu.c (100%) rename drivers/media/platform/{ => renesas}/sh_vou.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/Makefile (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_brx.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_brx.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_clu.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_clu.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_dl.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_dl.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_drm.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_drm.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_drv.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_entity.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_entity.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hgo.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hgo.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hgt.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hgt.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_histo.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_histo.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hsit.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hsit.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_lif.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_lif.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_lut.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_lut.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_pipe.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_pipe.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_regs.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_rpf.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_rwpf.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_rwpf.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_sru.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_sru.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_uds.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_uds.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_uif.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_uif.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_video.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_video.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_wpf.c (100%) create mode 100644 drivers/media/platform/rockchip/Kconfig create mode 100644 drivers/media/platform/rockchip/Makefile create mode 100644 drivers/media/platform/rockchip/rga/Kconfig create mode 100644 drivers/media/platform/rockchip/rkisp1/Kconfig create mode 100644 drivers/media/platform/samsung/Kconfig create mode 100644 drivers/media/platform/samsung/Makefile create mode 100644 drivers/media/platform/samsung/exynos-gsc/Kconfig rename drivers/media/platform/{ => samsung}/exynos-gsc/Makefile (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-core.c (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-core.h (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-m2m.c (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-regs.c (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-regs.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/Kconfig (96%) rename drivers/media/platform/{ => samsung}/exynos4-is/Makefile (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/common.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/common.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-capture.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-core.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-core.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-command.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-errno.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-errno.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-i2c.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-i2c.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-param.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-param.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-regs.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-regs.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-sensor.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-sensor.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-isp-video.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-isp-video.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-isp.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-isp.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-lite-reg.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-lite-reg.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-lite.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-lite.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-m2m.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-reg.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-reg.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/media-dev.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/media-dev.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/mipi-csis.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/mipi-csis.h (100%) create mode 100644 drivers/media/platform/samsung/s3c-camif/Kconfig rename drivers/media/platform/{ => samsung}/s3c-camif/Makefile (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-capture.c (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-core.c (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-core.h (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-regs.c (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-regs.h (100%) create mode 100644 drivers/media/platform/samsung/s5p-g2d/Kconfig rename drivers/media/platform/{ => samsung}/s5p-g2d/Makefile (100%) rename drivers/media/platform/{ => samsung}/s5p-g2d/g2d-hw.c (100%) rename drivers/media/platform/{ => samsung}/s5p-g2d/g2d-regs.h (100%) rename drivers/media/platform/{ => samsung}/s5p-g2d/g2d.c (100%) rename drivers/media/platform/{ => samsung}/s5p-g2d/g2d.h (100%) create mode 100644 drivers/media/platform/samsung/s5p-jpeg/Kconfig rename drivers/media/platform/{ => samsung}/s5p-jpeg/Makefile (100%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-core.c (99%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-core.h (99%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-exynos3250.c (100%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-exynos3250.h (97%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-exynos4.c (100%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-exynos4.h (100%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-s5p.c (99%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-s5p.h (97%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-regs.h (99%) create mode 100644 drivers/media/platform/samsung/s5p-mfc/Kconfig rename drivers/media/platform/{ => samsung}/s5p-mfc/Makefile (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc-v10.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc-v6.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc-v7.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc-v8.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc.c (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd.c (89%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd.h (92%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd_v5.c (98%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd_v5.h (82%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd_v6.c (98%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd_v6.h (82%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_common.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_ctrl.c (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_ctrl.h (92%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_debug.h (95%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_dec.c (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_dec.h (90%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_enc.c (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_enc.h (90%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_intr.c (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_intr.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_iommu.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr.c (98%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr.h (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr_v5.c (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr_v5.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr_v6.c (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr_v6.h (96%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_pm.c (97%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_pm.h (87%) create mode 100644 drivers/media/platform/sti/Kconfig create mode 100644 drivers/media/platform/sti/Makefile create mode 100644 drivers/media/platform/sti/bdisp/Kconfig create mode 100644 drivers/media/platform/sti/delta/Kconfig create mode 100644 drivers/media/platform/sti/hva/Kconfig create mode 100644 drivers/media/platform/sti/stm32/Kconfig rename drivers/media/platform/{ => sti}/stm32/Makefile (100%) rename drivers/media/platform/{ => sti}/stm32/dma2d/dma2d-hw.c (100%) rename drivers/media/platform/{ => sti}/stm32/dma2d/dma2d-regs.h (100%) rename drivers/media/platform/{ => sti}/stm32/dma2d/dma2d.c (100%) rename drivers/media/platform/{ => sti}/stm32/dma2d/dma2d.h (100%) rename drivers/media/platform/{ => sti}/stm32/stm32-dcmi.c (100%) delete mode 100644 drivers/media/platform/sunxi/Kconfig create mode 100644 drivers/media/platform/ti/Kconfig create mode 100644 drivers/media/platform/ti/Makefile rename drivers/media/platform/{ => ti}/am437x/Kconfig (88%) rename drivers/media/platform/{ => ti}/am437x/Makefile (100%) rename drivers/media/platform/{ => ti}/am437x/am437x-vpfe.c (100%) rename drivers/media/platform/{ => ti}/am437x/am437x-vpfe.h (100%) rename drivers/media/platform/{ => ti}/am437x/am437x-vpfe_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/Kconfig (90%) rename drivers/media/platform/{ => ti}/davinci/Makefile (100%) rename drivers/media/platform/{ => ti}/davinci/ccdc_hw_device.h (100%) rename drivers/media/platform/{ => ti}/davinci/dm355_ccdc.c (100%) rename drivers/media/platform/{ => ti}/davinci/dm355_ccdc_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/dm644x_ccdc.c (100%) rename drivers/media/platform/{ => ti}/davinci/dm644x_ccdc_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/isif.c (100%) rename drivers/media/platform/{ => ti}/davinci/isif_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_display.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_osd.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_osd_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_venc.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_venc_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpfe_capture.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpif.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpif.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpif_capture.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpif_capture.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpif_display.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpif_display.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpss.c (100%) rename drivers/media/platform/{ => ti}/omap/Kconfig (89%) rename drivers/media/platform/{ => ti}/omap/Makefile (100%) rename drivers/media/platform/{ => ti}/omap/omap_vout.c (100%) rename drivers/media/platform/{ => ti}/omap/omap_vout_vrfb.c (100%) rename drivers/media/platform/{ => ti}/omap/omap_vout_vrfb.h (100%) rename drivers/media/platform/{ => ti}/omap/omap_voutdef.h (100%) rename drivers/media/platform/{ => ti}/omap/omap_voutlib.c (100%) rename drivers/media/platform/{ => ti}/omap/omap_voutlib.h (100%) create mode 100644 drivers/media/platform/ti/omap3isp/Kconfig rename drivers/media/platform/{ => ti}/omap3isp/Makefile (100%) rename drivers/media/platform/{ => ti}/omap3isp/cfa_coef_table.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/gamma_table.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/isp.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isp.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispccdc.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispccdc.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispccp2.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispccp2.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispcsi2.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispcsi2.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispcsiphy.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispcsiphy.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/isph3a.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/isph3a_aewb.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isph3a_af.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isphist.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isphist.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/isppreview.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isppreview.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispreg.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispresizer.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispresizer.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispstat.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispstat.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispvideo.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispvideo.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/luma_enhance_table.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/noise_filter_table.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/omap3isp.h (100%) create mode 100644 drivers/media/platform/ti/vpe/Kconfig rename drivers/media/platform/{ti-vpe => ti/vpe}/Makefile (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/cal-camerarx.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/cal-video.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/cal.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/cal.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/cal_regs.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/csc.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/csc.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc_coeff.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma_priv.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpe.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpe_regs.h (100%) create mode 100644 drivers/media/platform/via/Kconfig create mode 100644 drivers/media/platform/via/Makefile rename drivers/media/platform/{ => via}/via-camera.c (100%) rename drivers/media/platform/{ => via}/via-camera.h (100%) rename drivers/media/tuners/{tuner-xc2028-types.h => xc2028-types.h} (96%) rename drivers/media/tuners/{tuner-xc2028.c => xc2028.c} (99%) rename drivers/media/tuners/{tuner-xc2028.h => xc2028.h} (99%) -- 2.35.1

3 3

[PATCH] ASoC: atmel: mchp-pdmc: print the correct property name
by Codrin Ciubotariu 18 Mar '22

18 Mar '22

The correct property is 'microchip,mic-pos', not 'mchp,mic-pos', so replace all occurences of 'mchp,mic-pos' with 'microchip,mic-pos'. Fix a multi-line comment format while we are at it. Fixes: 50291652af52 ("ASoC: atmel: mchp-pdmc: add PDMC driver") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu(a)microchip.com> --- sound/soc/atmel/mchp-pdmc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/atmel/mchp-pdmc.c b/sound/soc/atmel/mchp-pdmc.c index e0aec5fe8a26..1a7802fbf23c 100644 --- a/sound/soc/atmel/mchp-pdmc.c +++ b/sound/soc/atmel/mchp-pdmc.c @@ -879,13 +879,13 @@ static int mchp_pdmc_dt_init(struct mchp_pdmc *dd) dd->mic_no = of_property_count_u32_elems(np, "microchip,mic-pos"); if (dd->mic_no < 0) { - dev_err(dd->dev, "failed to get mchp,mic-pos: %d", + dev_err(dd->dev, "failed to get microchip,mic-pos: %d", dd->mic_no); return dd->mic_no; } if (!dd->mic_no || dd->mic_no % 2 || dd->mic_no / 2 > MCHP_PDMC_MAX_CHANNELS) { - dev_err(dd->dev, "invalid array length for mchp,mic-pos: %d", + dev_err(dd->dev, "invalid array length for microchip,mic-pos: %d", dd->mic_no); return -EINVAL; } @@ -894,9 +894,10 @@ static int mchp_pdmc_dt_init(struct mchp_pdmc *dd) dev_info(dd->dev, "%d PDM microphones declared\n", dd->mic_no); - /* by default, we consider the order of microphones in mchp,mic-pos to - * be the same with the channel mapping; 1st microphone channel 0, 2nd - * microphone channel 1, etc. + /* + * by default, we consider the order of microphones in + * microchip,mic-pos to be the same with the channel mapping; + * 1st microphone channel 0, 2nd microphone channel 1, etc. */ for (i = 0; i < dd->mic_no; i++) { int ds; -- 2.32.0

2 1

[PATCH] MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
by Nicolin Chen 18 Mar '22

18 Mar '22

Shengjiu has been actively working on latest FSL platforms and keeping upstream effort as well, while I have been working on other subsystem lately and cannot guarantee audio patch review in the near term. So replacing with him in the maintainer list. Cc: Shengjiu Wang <shengjiu.wang(a)gmail.com> Signed-off-by: Nicolin Chen <nicoleotsuka(a)gmail.com> --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 46ffe05eaeb7..bf7a0ae10d06 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7779,10 +7779,10 @@ F: drivers/net/ethernet/freescale/fs_enet/ F: include/linux/fs_enet_pd.h FREESCALE SOC SOUND DRIVERS -M: Nicolin Chen <nicoleotsuka(a)gmail.com> +M: Shengjiu Wang <shengjiu.wang(a)gmail.com> M: Xiubo Li <Xiubo.Lee(a)gmail.com> R: Fabio Estevam <festevam(a)gmail.com> -R: Shengjiu Wang <shengjiu.wang(a)gmail.com> +R: Nicolin Chen <nicoleotsuka(a)gmail.com> L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) L: linuxppc-dev(a)lists.ozlabs.org S: Maintained -- 2.17.1

3 2

[PATCH 00/19] Make the SOF control, PCM and PM code IPC agnostic
by Ranjani Sridharan 18 Mar '22

18 Mar '22

This series is a continuation to the SOF IPC abstraction work to support the new IPC version introduced in the SOF firmware. It makes the top-level control IO, PCM and PM code IPC-agnostic. Other than the first patch, the rest are purely for abstraction and include no changes in functionality. Ranjani Sridharan (19): ASoC: SOF: set up scheduler widget before all other widgets in the pipeline ASoC: SOF: Make sof_widget_setup/free IPC agnostic ASoC: SOF: Make sof_suspend/resume IPC agnostic ASoC: SOF: Introduce IPC ops for kcontrol IO ASoC: SOF: Add IPC3 topology control ops ASoC: SOF: Add volume_get/put IPC3 ops ASoC: SOF: Add switch get/put IPC3 ops ASoC: SOF: Add enum_get/put control ops for IPC3 ASoC: SOF: Add bytes_get/put control IPC ops for IPC3 ASoC: SOF: Add bytes_ext control IPC ops for IPC3 ASoC: SOF: Introduce IPC-specific PCM ops ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function ASoC: SOF: Introduce IPC3 PCM hw_free op ASoC: SOF: Define hw_params PCM op for IPC3 ASoC: SOF: Add trigger PCM op for IPC3 ASoC: SOF: Add dai_link_fixup PCM op for IPC3 ASoC: SOF: expose sof_route_setup() ASoC: SOF: topology: Add ops for setting up and tearing down pipelines ASoC: SOF: Add a new dai_get_clk topology IPC op sound/soc/sof/Makefile | 2 +- sound/soc/sof/control.c | 545 ++++--------------------------- sound/soc/sof/intel/hda-dai.c | 97 +----- sound/soc/sof/intel/hda.c | 169 +++------- sound/soc/sof/intel/hda.h | 7 +- sound/soc/sof/ipc.c | 10 +- sound/soc/sof/ipc3-control.c | 594 ++++++++++++++++++++++++++++++++++ sound/soc/sof/ipc3-ops.h | 21 ++ sound/soc/sof/ipc3-pcm.c | 372 +++++++++++++++++++++ sound/soc/sof/ipc3-topology.c | 384 +++++++++++++++++++++- sound/soc/sof/ipc3.c | 45 +++ sound/soc/sof/pcm.c | 354 +++----------------- sound/soc/sof/pm.c | 80 ++--- sound/soc/sof/sof-audio.c | 442 +++++-------------------- sound/soc/sof/sof-audio.h | 70 +++- sound/soc/sof/sof-priv.h | 17 +- sound/soc/sof/topology.c | 55 ++-- 17 files changed, 1805 insertions(+), 1459 deletions(-) create mode 100644 sound/soc/sof/ipc3-control.c create mode 100644 sound/soc/sof/ipc3-ops.h create mode 100644 sound/soc/sof/ipc3-pcm.c create mode 100644 sound/soc/sof/ipc3.c -- 2.25.1

2 20

[PATCH 0/6] Add new HW variants and fix few minor issues
by Vitaly Rodionov 18 Mar '22

18 Mar '22

This series adds new HW variants for Dell's Dolphin and Warlock, and also fixies few very minor issues. Stefan Binding (5): ALSA: hda/cs8409: Fix Warlock using dual mic configuration ALSA: hda/cs8409: Re-order quirk table into ascending order ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants ALSA: hda/cs8409: Support new Warlock MLK Variants ALSA: hda/cs8409: Disable HSBIAS_SENSE_EN for Cyborg Vitaly Rodionov (1): ALSA: hda/cs8409: Add new Dolphin HW variants sound/pci/hda/patch_cs8409-tables.c | 68 +++++++++++++++++++++-------- sound/pci/hda/patch_cs8409.c | 47 +++++++++++--------- sound/pci/hda/patch_cs8409.h | 5 +++ 3 files changed, 83 insertions(+), 37 deletions(-) -- 2.25.1

2 7

[RESEND v6 0/1] firmware: mtk: add adsp ipc protocol for sof
by Allen-KH Cheng 18 Mar '22

18 Mar '22

This patch provides mtk adsp ipc support for sof. ADSP IPC protocol offers (send/recv) interfaces using mediatek-mailbox APIs. This was tested and confirmed on MT8195 cherry board with sof. Based on linux-next changes since v5: - fix WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox /mtk-adsp-mailbox.o. Add MODULE_LICENSE in the last line. - Due to WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 in checkpatch, we don't remove SPDX-License in line 1. changes since v4: - add error message for wrong mbox chan changes since v3: - rebase on v5.16-rc8 - update reviewers changes since v2: - add out tag for two memory free phases changes since v1: - add comments for mtk_adsp_ipc_send and mtk_adsp_ipc_recv - remove useless MODULE_LICENSE - change label name to out_free Allen-KH Cheng (1): firmware: mediatek: add adsp ipc protocol interface drivers/firmware/Kconfig | 1 + drivers/firmware/Makefile | 1 + drivers/firmware/mediatek/Kconfig | 9 + drivers/firmware/mediatek/Makefile | 2 + drivers/firmware/mediatek/mtk-adsp-ipc.c | 161 ++++++++++++++++++ .../linux/firmware/mediatek/mtk-adsp-ipc.h | 65 +++++++ 6 files changed, 239 insertions(+) create mode 100644 drivers/firmware/mediatek/Kconfig create mode 100644 drivers/firmware/mediatek/Makefile create mode 100644 drivers/firmware/mediatek/mtk-adsp-ipc.c create mode 100644 include/linux/firmware/mediatek/mtk-adsp-ipc.h -- 2.18.0

2 2

[PATCH] ALSA: oss: Release temporary buffers upon errors
by Takashi Iwai 18 Mar '22

18 Mar '22

When the parameter changes fails, we don't need to keep the old temporary buffers. Release those (and plugin instances) upon errors for reducing dead memory footprint. Since we always call it at the exit of snd_pcm_oss_changes_params_locked(), the explicit calls of snd_pcm_oss_plugin_clear() can be dropped, too. Along with it, unify the buffer-free calls to a single helper and call it from the needed places. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/oss/pcm_oss.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index f158f0abd25d..90c3a367d7de 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -842,6 +842,17 @@ static void unlock_params(struct snd_pcm_runtime *runtime) mutex_unlock(&runtime->oss.params_lock); } +static void snd_pcm_oss_release_buffers(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + kvfree(runtime->oss.buffer); + runtime->oss.buffer = NULL; +#ifdef CONFIG_SND_PCM_OSS_PLUGINS + snd_pcm_oss_plugin_clear(substream); +#endif +} + /* call with params_lock held */ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream) { @@ -972,12 +983,10 @@ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream) snd_pcm_oss_plugin_clear(substream); if (!direct) { /* add necessary plugins */ - snd_pcm_oss_plugin_clear(substream); err = snd_pcm_plug_format_plugins(substream, params, sparams); if (err < 0) { pcm_dbg(substream->pcm, "snd_pcm_plug_format_plugins failed: %i\n", err); - snd_pcm_oss_plugin_clear(substream); goto failure; } if (runtime->oss.plugin_first) { @@ -986,7 +995,6 @@ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream) if (err < 0) { pcm_dbg(substream->pcm, "snd_pcm_plugin_build_io failed: %i\n", err); - snd_pcm_oss_plugin_clear(substream); goto failure; } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { @@ -994,10 +1002,8 @@ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream) } else { err = snd_pcm_plugin_insert(plugin); } - if (err < 0) { - snd_pcm_oss_plugin_clear(substream); + if (err < 0) goto failure; - } } } #endif @@ -1086,6 +1092,8 @@ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream) err = 0; failure: + if (err) + snd_pcm_oss_release_buffers(substream); kfree(sw_params); kfree(params); kfree(sparams); @@ -2355,13 +2363,7 @@ static void snd_pcm_oss_look_for_setup(struct snd_pcm *pcm, int stream, static void snd_pcm_oss_release_substream(struct snd_pcm_substream *substream) { - struct snd_pcm_runtime *runtime; - runtime = substream->runtime; - kvfree(runtime->oss.buffer); - runtime->oss.buffer = NULL; -#ifdef CONFIG_SND_PCM_OSS_PLUGINS - snd_pcm_oss_plugin_clear(substream); -#endif + snd_pcm_oss_release_buffers(substream); substream->oss.oss = 0; } -- 2.34.1

1 0

[PATCH] ALSA: oss: Fix PCM OSS buffer allocation overflow
by Takashi Iwai 18 Mar '22

18 Mar '22

We've got syzbot reports hitting INT_MAX overflow at vmalloc() allocation that is called from snd_pcm_plug_alloc(). Although we apply the restrictions to input parameters, it's based only on the hw_params of the underlying PCM device. Since the PCM OSS layer allocates a temporary buffer for the data conversion, the size may become unexpectedly large when more channels or higher rates is given; in the reported case, it went over INT_MAX, hence it hits WARN_ON(). This patch is an attempt to avoid such an overflow and an allocation for too large buffers. First off, it adds the limit of 1MB as the upper bound for period bytes. This must be large enough for all use cases, and we really don't want to handle a larger temporary buffer than this size. The size check is performed at two places, where the original period bytes is calculated and where the plugin buffer size is calculated. In addition, the driver uses array_size() and array3_size() for multiplications to catch overflows for the converted period size and buffer bytes. Reported-by: syzbot+72732c532ac1454eeee9(a)syzkaller.appspotmail.com Suggested-by: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/00000000000085b1b305da5a66f3@google.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/oss/pcm_oss.c | 12 ++++++++---- sound/core/oss/pcm_plugin.c | 5 ++++- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index 3ee9edf85815..f158f0abd25d 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -774,6 +774,11 @@ static int snd_pcm_oss_period_size(struct snd_pcm_substream *substream, if (oss_period_size < 16) return -EINVAL; + + /* don't allocate too large period; 1MB period must be enough */ + if (oss_period_size > 1024 * 1024) + return -ENOMEM; + runtime->oss.period_bytes = oss_period_size; runtime->oss.period_frames = 1; runtime->oss.periods = oss_periods; @@ -1043,10 +1048,9 @@ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream) goto failure; } #endif - oss_period_size *= oss_frame_size; - - oss_buffer_size = oss_period_size * runtime->oss.periods; - if (oss_buffer_size < 0) { + oss_period_size = array_size(oss_period_size, oss_frame_size); + oss_buffer_size = array_size(oss_period_size, runtime->oss.periods); + if (oss_buffer_size <= 0) { err = -EINVAL; goto failure; } diff --git a/sound/core/oss/pcm_plugin.c b/sound/core/oss/pcm_plugin.c index 061ba06bc926..82e180c776ae 100644 --- a/sound/core/oss/pcm_plugin.c +++ b/sound/core/oss/pcm_plugin.c @@ -62,7 +62,10 @@ static int snd_pcm_plugin_alloc(struct snd_pcm_plugin *plugin, snd_pcm_uframes_t width = snd_pcm_format_physical_width(format->format); if (width < 0) return width; - size = frames * format->channels * width; + size = array3_size(frames, format->channels, width); + /* check for too large period size once again */ + if (size > 1024 * 1024) + return -ENOMEM; if (snd_BUG_ON(size % 8)) return -ENXIO; size /= 8; -- 2.34.1

1 0

[PATCH] ALSA: hda/realtek: Fix LED on Zbook Studio G9
by Kai-Heng Feng 18 Mar '22

18 Mar '22

Commit 07bcab93946c ("ALSA: hda/realtek: Add support for HP Laptops") breaks mute and micmute LEDs because it changed the LED quirk from ALC285_FIXUP_HP_GPIO_LED to ALC245_FIXUP_HP_GPIO_LED, so change it back here. Also reorder the chain of quirks to ensure LED quirk is the last one being applied. Fixes: 07bcab93946c ("ALSA: hda/realtek: Add support for HP Laptops") Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4650ef9110d62..1d14be4ee31d8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8773,9 +8773,9 @@ static const struct hda_fixup alc269_fixups[] = { }, [ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED] = { .type = HDA_FIXUP_FUNC, - .v.func = alc245_fixup_hp_gpio_led, + .v.func = cs35l41_fixup_spi_four, .chained = true, - .chain_id = ALC245_FIXUP_CS35L41_SPI_4, + .chain_id = ALC285_FIXUP_HP_GPIO_LED, }, [ALC285_FIXUP_HP_SPEAKERS_MICMUTE_LED] = { .type = HDA_FIXUP_VERBS, -- 2.34.1

2 1

Re: [PATCH 10/19] dma: imx-sdma: Add multi fifo support
by Sascha Hauer 18 Mar '22

18 Mar '22

On Fri, Mar 18, 2022 at 01:42:51PM +0800, Shengjiu Wang wrote: > Hi > On Thu, Mar 17, 2022 at 4:28 PM Sascha Hauer <[1]s.hauer(a)pengutronix.de> > wrote: > > Signed-off-by: Sascha Hauer <[2]s.hauer(a)pengutronix.de> > --- > drivers/dma/imx-sdma.c | 54 +++++++++++++++++++++++++++ > include/linux/platform_data/dma-imx.h | 7 ++++ > 2 files changed, 61 insertions(+) > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c > index 1038f6bc7f846..21e1cec2ffde9 100644 > --- a/drivers/dma/imx-sdma.c > +++ b/drivers/dma/imx-sdma.c > @@ -14,6 +14,7 @@ > #include <linux/iopoll.h> > #include <linux/module.h> > #include <linux/types.h> > +#include <linux/bitfield.h> > #include <linux/bitops.h> > #include <linux/mm.h> > #include <linux/interrupt.h> > @@ -73,6 +74,7 @@ > #define SDMA_CHNENBL0_IMX35 0x200 > #define SDMA_CHNENBL0_IMX31 0x080 > #define SDMA_CHNPRI_0 0x100 > +#define SDMA_DONE0_CONFIG 0x1000 > > /* > * Buffer descriptor status values. > @@ -180,6 +182,12 @@ > BIT(DMA_MEM_TO_DEV) | \ > BIT(DMA_DEV_TO_DEV)) > > +#define SDMA_WATERMARK_LEVEL_N_FIFOS GENMASK(15, 12) > +#define SDMA_WATERMARK_LEVEL_SW_DONE BIT(23) > + > +#define SDMA_DONE0_CONFIG_DONE_SEL BIT(7) > +#define SDMA_DONE0_CONFIG_DONE_DIS BIT(6) > + > /** > * struct sdma_script_start_addrs - SDMA script start pointers > * > @@ -441,6 +449,11 @@ struct sdma_channel { > struct work_struct terminate_worker; > struct list_head terminated; > bool is_ram_script; > + unsigned int n_fifos; > + unsigned int n_fifos_src; > + unsigned int n_fifos_dst; > + bool sw_done; > + u32 sw_done_sel; > > "sw_done_sel" is not used, and may not be needed. Ok, will drop. > And can we just add 'struct sdma_peripheral_config *pconfig' > to replace each item here ('n_fifos_src', 'n_fifos_dst', > 'sw_done')? I rather do not access the pointer to the peripheral_config outside of sdma_config because I know nothing about the lifetime of that structure. > the pconfig can point to the struct in dma_slave_config. > And 'n_fifos' can be moved to locally function in > sdma_set_watermarklevel_for_sais(), then use sdmac->direction > to select 'n_fifos_dst' or 'n_fifos_src'. Ok. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

1 0

[PATCH] ASoC: fsl_spdif: Add new registers included on i.MX8ULP
by Shengjiu Wang 17 Mar '22

17 Mar '22

There are some new registers added on i.MX8ULP, they are the SPDIF transmit Professional C channel registers, 192bit SPDIF receive C channel registers, and 192bit SPDIF transmit C channel registers. There are two output lines, SPDIF_OUT1 and SPDIF_OUT2, the original REG_SPDIF_STCSCH and REG_SPDIF_STCSCL are used for SPDIF_OUT1, the new REG_SPDIF_STCSPH and REG_SPDIF_STCSPL are used for SPDIF_OUT2, the 192bit SPDIF C channel registers are used for both. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_spdif.c | 52 ++++++++++++++++++++++++++++++++++++++- sound/soc/fsl/fsl_spdif.h | 14 +++++++++++ 2 files changed, 65 insertions(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index b502e7c3c04d..42d11aca38a1 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -50,6 +50,7 @@ static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb }; * @shared_root_clock: flag of sharing a clock source with others; * so the driver shouldn't set root clock rate * @raw_capture_mode: if raw capture mode support + * @cchannel_192b: if there are registers for 192bits C channel data * @interrupts: interrupt number * @tx_burst: tx maxburst size * @rx_burst: rx maxburst size @@ -59,6 +60,7 @@ struct fsl_spdif_soc_data { bool imx; bool shared_root_clock; bool raw_capture_mode; + bool cchannel_192b; u32 interrupts; u32 tx_burst; u32 rx_burst; @@ -196,6 +198,7 @@ static struct fsl_spdif_soc_data fsl_spdif_imx8ulp = { .tx_burst = 2, /* Applied for EDMA */ .rx_burst = 2, /* Applied for EDMA */ .tx_formats = SNDRV_PCM_FMTBIT_S24_LE, /* Applied for EDMA */ + .cchannel_192b = true, }; /* Check if clk is a root clock that does not share clock source with others */ @@ -441,6 +444,23 @@ static void spdif_write_channel_status(struct fsl_spdif_priv *spdif_priv) regmap_write(regmap, REG_SPDIF_STCSCL, ch_status); dev_dbg(&pdev->dev, "STCSCL: 0x%06x\n", ch_status); + + if (spdif_priv->soc->cchannel_192b) { + ch_status = (bitrev8(ctrl->ch_status[0]) << 24) | + (bitrev8(ctrl->ch_status[1]) << 16) | + (bitrev8(ctrl->ch_status[2]) << 8) | + bitrev8(ctrl->ch_status[3]); + + regmap_update_bits(regmap, REG_SPDIF_SCR, 0x1000000, 0x1000000); + + /* + * The first 32bit should be in REG_SPDIF_STCCA_31_0 register, + * but here we need to set REG_SPDIF_STCCA_191_160 on 8ULP + * then can get correct result with HDMI analyzer capture. + * There is a hardware bug here. + */ + regmap_write(regmap, REG_SPDIF_STCCA_191_160, ch_status); + } } /* Set SPDIF PhaseConfig register for rx clock */ @@ -1229,6 +1249,8 @@ static const struct reg_default fsl_spdif_reg_defaults[] = { {REG_SPDIF_STR, 0x00000000}, {REG_SPDIF_STCSCH, 0x00000000}, {REG_SPDIF_STCSCL, 0x00000000}, + {REG_SPDIF_STCSPH, 0x00000000}, + {REG_SPDIF_STCSPL, 0x00000000}, {REG_SPDIF_STC, 0x00020f00}, }; @@ -1248,8 +1270,22 @@ static bool fsl_spdif_readable_reg(struct device *dev, unsigned int reg) case REG_SPDIF_SRQ: case REG_SPDIF_STCSCH: case REG_SPDIF_STCSCL: + case REG_SPDIF_STCSPH: + case REG_SPDIF_STCSPL: case REG_SPDIF_SRFM: case REG_SPDIF_STC: + case REG_SPDIF_SRCCA_31_0: + case REG_SPDIF_SRCCA_63_32: + case REG_SPDIF_SRCCA_95_64: + case REG_SPDIF_SRCCA_127_96: + case REG_SPDIF_SRCCA_159_128: + case REG_SPDIF_SRCCA_191_160: + case REG_SPDIF_STCCA_31_0: + case REG_SPDIF_STCCA_63_32: + case REG_SPDIF_STCCA_95_64: + case REG_SPDIF_STCCA_127_96: + case REG_SPDIF_STCCA_159_128: + case REG_SPDIF_STCCA_191_160: return true; default: return false; @@ -1268,6 +1304,12 @@ static bool fsl_spdif_volatile_reg(struct device *dev, unsigned int reg) case REG_SPDIF_SRU: case REG_SPDIF_SRQ: case REG_SPDIF_SRFM: + case REG_SPDIF_SRCCA_31_0: + case REG_SPDIF_SRCCA_63_32: + case REG_SPDIF_SRCCA_95_64: + case REG_SPDIF_SRCCA_127_96: + case REG_SPDIF_SRCCA_159_128: + case REG_SPDIF_SRCCA_191_160: return true; default: return false; @@ -1286,7 +1328,15 @@ static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg) case REG_SPDIF_STR: case REG_SPDIF_STCSCH: case REG_SPDIF_STCSCL: + case REG_SPDIF_STCSPH: + case REG_SPDIF_STCSPL: case REG_SPDIF_STC: + case REG_SPDIF_STCCA_31_0: + case REG_SPDIF_STCCA_63_32: + case REG_SPDIF_STCCA_95_64: + case REG_SPDIF_STCCA_127_96: + case REG_SPDIF_STCCA_159_128: + case REG_SPDIF_STCCA_191_160: return true; default: return false; @@ -1298,7 +1348,7 @@ static const struct regmap_config fsl_spdif_regmap_config = { .reg_stride = 4, .val_bits = 32, - .max_register = REG_SPDIF_STC, + .max_register = REG_SPDIF_STCCA_191_160, .reg_defaults = fsl_spdif_reg_defaults, .num_reg_defaults = ARRAY_SIZE(fsl_spdif_reg_defaults), .readable_reg = fsl_spdif_readable_reg, diff --git a/sound/soc/fsl/fsl_spdif.h b/sound/soc/fsl/fsl_spdif.h index bff8290e71f2..75b42a692c90 100644 --- a/sound/soc/fsl/fsl_spdif.h +++ b/sound/soc/fsl/fsl_spdif.h @@ -31,9 +31,23 @@ #define REG_SPDIF_STR 0x30 /* SPDIFTxRight Register */ #define REG_SPDIF_STCSCH 0x34 /* SPDIFTxCChannelCons_h Register */ #define REG_SPDIF_STCSCL 0x38 /* SPDIFTxCChannelCons_l Register */ +#define REG_SPDIF_STCSPH 0x3C /* SPDIFTxCChannel_Prof_h Register */ +#define REG_SPDIF_STCSPL 0x40 /* SPDIFTxCChannel_Prof_l Register */ #define REG_SPDIF_SRFM 0x44 /* FreqMeas Register */ #define REG_SPDIF_STC 0x50 /* SPDIFTxClk Register */ +#define REG_SPDIF_SRCCA_31_0 0x60 /* SPDIF receive C channel register, bits 31-0 */ +#define REG_SPDIF_SRCCA_63_32 0x64 /* SPDIF receive C channel register, bits 63-32 */ +#define REG_SPDIF_SRCCA_95_64 0x68 /* SPDIF receive C channel register, bits 95-64 */ +#define REG_SPDIF_SRCCA_127_96 0x6C /* SPDIF receive C channel register, bits 127-96 */ +#define REG_SPDIF_SRCCA_159_128 0x70 /* SPDIF receive C channel register, bits 159-128 */ +#define REG_SPDIF_SRCCA_191_160 0x74 /* SPDIF receive C channel register, bits 191-160 */ +#define REG_SPDIF_STCCA_31_0 0x78 /* SPDIF transmit C channel register, bits 31-0 */ +#define REG_SPDIF_STCCA_63_32 0x7C /* SPDIF transmit C channel register, bits 63-32 */ +#define REG_SPDIF_STCCA_95_64 0x80 /* SPDIF transmit C channel register, bits 95-64 */ +#define REG_SPDIF_STCCA_127_96 0x84 /* SPDIF transmit C channel register, bits 127-96 */ +#define REG_SPDIF_STCCA_159_128 0x88 /* SPDIF transmit C channel register, bits 159-128 */ +#define REG_SPDIF_STCCA_191_160 0x8C /* SPDIF transmit C channel register, bits 191-160 */ /* SPDIF Configuration register */ #define SCR_RXFIFO_CTL_OFFSET 23 -- 2.17.1

2 1

Re: [PATCH] ASoC: SOF: topology: Use kmemdup() to replace kzalloc + memcpy
by Mark Brown 17 Mar '22

17 Mar '22

On Thu, 17 Mar 2022 02:38:41 -0700, Yihao Han wrote: > fix memdup.cocci warning: > sound/soc/sof/topology.c:876:19-26: WARNING opportunity for kmemdup > > Generated by: scripts/coccinelle/api/memdup.cocci > > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: SOF: topology: Use kmemdup() to replace kzalloc + memcpy commit: b26f965f7c83464f60d5af411ef9a03079e41800 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark

1 0

[syzbot] WARNING: kmalloc bug in snd_pcm_plugin_alloc (2)
by syzbot 17 Mar '22

17 Mar '22

Hello, syzbot found the following issue on: HEAD commit: 68453767131a ARM: Spectre-BHB: provide empty stub for non-.. git tree: upstream console output: https://syzkaller.appspot.com/x/log.txt?x=11ddd329700000 kernel config: https://syzkaller.appspot.com/x/.config?x=442f8ac61e60a75e dashboard link: https://syzkaller.appspot.com/bug?extid=72732c532ac1454eeee9 compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=13636d79700000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=128fcd03700000 The issue was bisected to: commit 7661809d493b426e979f39ab512e3adf41fbcc69 Author: Linus Torvalds <torvalds(a)linux-foundation.org> Date: Wed Jul 14 16:45:49 2021 +0000 mm: don't allow oversized kvmalloc() calls bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=134eb7d1700000 final oops: https://syzkaller.appspot.com/x/report.txt?x=10ceb7d1700000 console output: https://syzkaller.appspot.com/x/log.txt?x=174eb7d1700000 IMPORTANT: if you fix the issue, please add the following tag to the commit: Reported-by: syzbot+72732c532ac1454eeee9(a)syzkaller.appspotmail.com Fixes: 7661809d493b ("mm: don't allow oversized kvmalloc() calls") ------------[ cut here ]------------ WARNING: CPU: 1 PID: 3761 at mm/util.c:591 kvmalloc_node+0x121/0x130 mm/util.c:591 Modules linked in: CPU: 0 PID: 3761 Comm: syz-executor165 Not tainted 5.17.0-rc7-syzkaller-00227-g68453767131a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kvmalloc_node+0x121/0x130 mm/util.c:591 Code: eb 8e 45 31 e4 e9 49 ff ff ff e8 fa 91 d0 ff 41 81 e5 00 20 00 00 31 ff 44 89 ee e8 69 95 d0 ff 45 85 ed 75 dd e8 df 91 d0 ff <0f> 0b e9 22 ff ff ff 0f 1f 84 00 00 00 00 00 55 48 89 fd 53 e8 c6 RSP: 0018:ffffc9000282fb38 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88801c2d4d00 RCX: 0000000000000000 RDX: ffff88806c235700 RSI: ffffffff81a82e51 RDI: 0000000000000003 RBP: 00000000c0c0c100 R08: 0000000000000000 R09: 00000000ffffffff R10: ffffffff81a82e47 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff88801c2d4d14 FS: 00007f4196580700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffee56e9938 CR3: 000000006d5c7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> kvmalloc include/linux/slab.h:731 [inline] kvzalloc include/linux/slab.h:739 [inline] snd_pcm_plugin_alloc+0x570/0x770 sound/core/oss/pcm_plugin.c:71 snd_pcm_plug_alloc+0x20d/0x310 sound/core/oss/pcm_plugin.c:118 snd_pcm_oss_change_params_locked+0x19db/0x3bf0 sound/core/oss/pcm_oss.c:1041 snd_pcm_oss_change_params sound/core/oss/pcm_oss.c:1104 [inline] snd_pcm_oss_get_active_substream+0x164/0x1c0 sound/core/oss/pcm_oss.c:1121 snd_pcm_oss_get_rate sound/core/oss/pcm_oss.c:1778 [inline] snd_pcm_oss_set_rate sound/core/oss/pcm_oss.c:1770 [inline] snd_pcm_oss_ioctl+0x144f/0x3430 sound/core/oss/pcm_oss.c:2632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f41965cf1f9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f41965802f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f41966584a8 RCX: 00007f41965cf1f9 RDX: 0000000020000140 RSI: 00000000c0045002 RDI: 0000000000000003 RBP: 00007f41966584a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f41966584ac R13: 00007f4196625088 R14: 7364612f7665642f R15: 0000000000022000 </TASK> --- This report is generated by a bot. It may contain errors. See https://goo.gl/tpsmEJ for more information about syzbot. syzbot engineers can be reached at syzkaller(a)googlegroups.com. syzbot will keep track of this issue. See: https://goo.gl/tpsmEJ#status for how to communicate with syzbot. For information about bisection process see: https://goo.gl/tpsmEJ#bisection syzbot can test patches for this issue, for details see: https://goo.gl/tpsmEJ#testing-patches

3 3

[PATCH 00/19] ASoC: fsl_micfil: Driver updates
by Sascha Hauer 17 Mar '22

17 Mar '22

This series has a bunch of cleanups for the FSL MICFIL driver. There is not much chance for regressions in this series as the driver currently can't work at all. The MICFIL needs multififo support in the i.MX SDMA engine which is added with this series, see 10/19. The multififo support is selected in the dma phandle arguments in the device tree, the transfer type must be '25' aka IMX_DMATYPE_MULTI_SAI. This is set already to 25 in the upstream i.MX8M[NM] dtsi files, but the SDMA driver silently ignores unsupported values instead of throwing an error. This is fixed in this series and multififo support is added. I think the series should go via the ASoC tree, so I'll need an ack from the DMA guys for 9/19 and 10/10. Sascha Sascha Hauer (19): ASoC: fsl_micfil: Drop unnecessary register read ASoC: fsl_micfil: Drop unused register read ASoC: fsl_micfil: drop fsl_micfil_set_mclk_rate() ASoC: fsl_micfil: do not define SHIFT/MASK for single bits ASoC: fsl_micfil: use GENMASK to define register bit fields ASoC: fsl_micfil: use clear/set bits ASoC: fsl_micfil: drop error messages from failed register accesses ASoC: fsl_micfil: drop unused variables dma: imx-sdma: error out on unsupported transfer types dma: imx-sdma: Add multi fifo support ASoC: fsl_micfil: add multi fifo support ASoC: fsl_micfil: use define for OSR default value ASoC: fsl_micfil: Drop get_pdm_clk() ASoC: fsl_micfil: simplify clock setting ASoC: fsl_micfil: rework quality setting ASoC: fsl_micfil: drop unused include ASoC: fsl_micfil: drop only once used defines ASoC: fsl_micfil: drop support for undocumented property ASoC: fsl_micfil: fold fsl_set_clock_params() into its only user drivers/dma/imx-sdma.c | 71 ++++- include/linux/platform_data/dma-imx.h | 7 + sound/soc/fsl/fsl_micfil.c | 368 +++++++++----------------- sound/soc/fsl/fsl_micfil.h | 269 +++++-------------- 4 files changed, 265 insertions(+), 450 deletions(-) -- 2.30.2

2 20

Re: [PATCH 10/19] dma: imx-sdma: Add multi fifo support
by Sascha Hauer 17 Mar '22

17 Mar '22

On Thu, Mar 17, 2022 at 08:20:22PM +0800, Shengjiu Wang wrote: > Hi > On Thu, Mar 17, 2022 at 6:19 PM Sascha Hauer <[1]s.hauer(a)pengutronix.de> > wrote: > > On Thu, Mar 17, 2022 at 05:08:55PM +0800, Shengjiu Wang wrote: > > On Thu, Mar 17, 2022 at 4:28 PM Sascha Hauer > <[1][2]s.hauer(a)pengutronix.de> > > wrote: > > > > +struct sdma_peripheral_config { > > + int n_fifos_src; > > + int n_fifos_dst; > > + bool sw_done; > > +}; > > + > > #endif > > > > Hi Sascha > > This is our internal definition for this sdma_peripheral_config. > > Could you please adopt this? > > This structure is completely internal to the kernel and can be adjusted > when we need it. I don't see a reason to add unused fields to it just to > be compatible with a downstream kernel. > > Yes, it is not used by micfil. But the fifo_offset and words_per_fifo > is part the multi fifo script support scope, if only add fifo_num, it > looks > like this feature is not complete. No, it's not. I only added the parts that I am interested in and that I can test. I have some multichannel audio stuff in my pipeline, I might add more pieces later. > By the way, which multi fifo script version are you using? seems it is > not the latest compared with our release, right? I am using the latest firmware from linux-firmware.git. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

1 0

Re: [PATCH] ASoC: SOF: topology: Use kmemdup() to replace kzalloc + memcpy
by Pierre-Louis Bossart 17 Mar '22

17 Mar '22

On 3/17/22 04:38, Yihao Han wrote: > fix memdup.cocci warning: > sound/soc/sof/topology.c:876:19-26: WARNING opportunity for kmemdup > > Generated by: scripts/coccinelle/api/memdup.cocci > > Signed-off-by: Yihao Han <hanyihao(a)vivo.com> Thanks for the patch Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> > --- > sound/soc/sof/topology.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/sound/soc/sof/topology.c b/sound/soc/sof/topology.c > index 367fbe2d5b31..369693cc6d10 100644 > --- a/sound/soc/sof/topology.c > +++ b/sound/soc/sof/topology.c > @@ -873,11 +873,10 @@ static int sof_control_load_bytes(struct snd_soc_component *scomp, > > /* copy the private data */ > if (priv_size > 0) { > - scontrol->priv = kzalloc(priv_size, GFP_KERNEL); > + scontrol->priv = kmemdup(control->priv.data, priv_size, GFP_KERNEL); > if (!scontrol->priv) > return -ENOMEM; > > - memcpy(scontrol->priv, control->priv.data, priv_size); > scontrol->priv_size = priv_size; > } >

1 0

Re: [PATCH 10/19] dma: imx-sdma: Add multi fifo support
by Sascha Hauer 17 Mar '22

17 Mar '22

On Thu, Mar 17, 2022 at 05:08:55PM +0800, Shengjiu Wang wrote: > On Thu, Mar 17, 2022 at 4:28 PM Sascha Hauer <[1]s.hauer(a)pengutronix.de> > wrote: > > +struct sdma_peripheral_config { > + int n_fifos_src; > + int n_fifos_dst; > + bool sw_done; > +}; > + > #endif > > Hi Sascha > This is our internal definition for this sdma_peripheral_config. > Could you please adopt this? This structure is completely internal to the kernel and can be adjusted when we need it. I don't see a reason to add unused fields to it just to be compatible with a downstream kernel. Sascha > /** > * struct sdma_audio_config - special sdma config for audio case > * @src_fifo_num: source fifo number for mcu_2_sai/sai_2_mcu script > * For example, if there are 4 fifos, sdma will fetch > * fifos one by one and roll back to the first fifo after > * the 4th fifo fetch. > * @dst_fifo_num: similar as src_fifo_num, but dest fifo instead. > * @src_fifo_off: source fifo offset, 0 means all fifos are continuous, 1 > * means 1 word offset between fifos. All offset between > * fifos should be same. > * @dst_fifo_off: dst fifo offset, similar as @src_fifo_off. > * @words_per_fifo: numbers of words per fifo fetch/fill, 0 means > * one channel per fifo, 1 means 2 channels per fifo.. > * If 'src_fifo_num = 4' and 'chans_per_fifo = 1', it > * means the first two words(channels) fetch from fifo1 > * and then jump to fifo2 for next two words, and so on > * after the last fifo4 fetched, roll back to fifo1. > * @sw_done_sel: software done selector, PDM need enable software done > feature > * in mcu_2_sai/sai_2_mcu script. > * Bit31: sw_done eanbled or not > * Bit16~Bit0: selector > * For example: 0x80000000 means sw_done enabled for done0 > * sector which is for PDM on i.mx8mm. > */ > struct sdma_audio_config { > u8 src_fifo_num; > u8 dst_fifo_num; > u8 src_fifo_off; > u8 dst_fifo_off; > u8 words_per_fifo; > u32 sw_done_sel; > }; > best regards > wang shengjiu > > > References > > Visible links > 1. mailto:s.hauer@pengutronix.de > 2. mailto:s.hauer@pengutronix.de -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

1 0

RE: [PATCH 10/19] dma: imx-sdma: Add multi fifo support
by S.J. Wang 17 Mar '22

17 Mar '22

Hi Sascha > --- > drivers/dma/imx-sdma.c | 54 +++++++++++++++++++++++++++ > include/linux/platform_data/dma-imx.h | 7 ++++ > 2 files changed, 61 insertions(+) > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index > 1038f6bc7f846..21e1cec2ffde9 100644 > --- a/drivers/dma/imx-sdma.c > +++ b/drivers/dma/imx-sdma.c > @@ -14,6 +14,7 @@ > #include <linux/iopoll.h> > #include <linux/module.h> > #include <linux/types.h> > +#include <linux/bitfield.h> > #include <linux/bitops.h> > #include <linux/mm.h> > #include <linux/interrupt.h> > @@ -73,6 +74,7 @@ > #define SDMA_CHNENBL0_IMX35 0x200 > #define SDMA_CHNENBL0_IMX31 0x080 > #define SDMA_CHNPRI_0 0x100 > +#define SDMA_DONE0_CONFIG 0x1000 > > /* > * Buffer descriptor status values. > @@ -180,6 +182,12 @@ > BIT(DMA_MEM_TO_DEV) | \ > BIT(DMA_DEV_TO_DEV)) > > +#define SDMA_WATERMARK_LEVEL_N_FIFOS GENMASK(15, 12) > +#define SDMA_WATERMARK_LEVEL_SW_DONE BIT(23) > + > +#define SDMA_DONE0_CONFIG_DONE_SEL BIT(7) > +#define SDMA_DONE0_CONFIG_DONE_DIS BIT(6) > + > /** > * struct sdma_script_start_addrs - SDMA script start pointers > * > @@ -441,6 +449,11 @@ struct sdma_channel { > struct work_struct terminate_worker; > struct list_head terminated; > bool is_ram_script; > + unsigned int n_fifos; > + unsigned int n_fifos_src; > + unsigned int n_fifos_dst; > + bool sw_done; > + u32 sw_done_sel; > }; > > #define IMX_DMA_SG_LOOP BIT(0) > @@ -773,6 +786,14 @@ static void sdma_event_enable(struct > sdma_channel *sdmac, unsigned int event) > val = readl_relaxed(sdma->regs + chnenbl); > __set_bit(channel, &val); > writel_relaxed(val, sdma->regs + chnenbl); > + > + /* Set SDMA_DONEx_CONFIG is sw_done enabled */ > + if (sdmac->sw_done) { > + val = readl_relaxed(sdma->regs + SDMA_DONE0_CONFIG); > + val |= SDMA_DONE0_CONFIG_DONE_SEL; > + val &= ~SDMA_DONE0_CONFIG_DONE_DIS; > + writel_relaxed(val, sdma->regs + SDMA_DONE0_CONFIG); > + } > } > > static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int > event) @@ -1022,6 +1043,10 @@ static int sdma_get_pc(struct > sdma_channel *sdmac, > case IMX_DMATYPE_IPU_MEMORY: > emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; > break; > + case IMX_DMATYPE_MULTI_SAI: > + per_2_emi = sdma->script_addrs->sai_2_mcu_addr; > + emi_2_per = sdma->script_addrs->mcu_2_sai_addr; > + break; > default: > dev_err(sdma->dev, "Unsupported transfer type %d\n", > peripheral_type); @@ -1198,6 +1223,15 @@ static void > sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac) > sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT; } > > +static void sdma_set_watermarklevel_for_sais(struct sdma_channel > +*sdmac) { > + if (sdmac->sw_done) > + sdmac->watermark_level |= > SDMA_WATERMARK_LEVEL_SW_DONE; > + > + sdmac->watermark_level |= > + FIELD_PREP(SDMA_WATERMARK_LEVEL_N_FIFOS, > +sdmac->n_fifos); } > + > static int sdma_config_channel(struct dma_chan *chan) { > struct sdma_channel *sdmac = to_sdma_chan(chan); @@ -1234,6 > +1268,10 @@ static int sdma_config_channel(struct dma_chan *chan) > sdmac->peripheral_type == IMX_DMATYPE_ASRC) > sdma_set_watermarklevel_for_p2p(sdmac); > } else { > + if (sdmac->peripheral_type == > + IMX_DMATYPE_MULTI_SAI) > + sdma_set_watermarklevel_for_sais(sdmac); > + > __set_bit(sdmac->event_id0, sdmac->event_mask); > } > > @@ -1669,6 +1707,7 @@ static int sdma_config_write(struct dma_chan > *chan, > sdmac->watermark_level = dmaengine_cfg->src_maxburst * > dmaengine_cfg->src_addr_width; > sdmac->word_size = dmaengine_cfg->src_addr_width; > + sdmac->n_fifos = sdmac->n_fifos_src; > } else if (direction == DMA_DEV_TO_DEV) { > sdmac->per_address2 = dmaengine_cfg->src_addr; > sdmac->per_address = dmaengine_cfg->dst_addr; @@ -1682,6 > +1721,7 @@ static int sdma_config_write(struct dma_chan *chan, > sdmac->watermark_level = dmaengine_cfg->dst_maxburst * > dmaengine_cfg->dst_addr_width; > sdmac->word_size = dmaengine_cfg->dst_addr_width; > + sdmac->n_fifos = sdmac->n_fifos_dst; > } > sdmac->direction = direction; > return sdma_config_channel(chan); @@ -1691,9 +1731,23 @@ static int > sdma_config(struct dma_chan *chan, > struct dma_slave_config *dmaengine_cfg) { > struct sdma_channel *sdmac = to_sdma_chan(chan); > + struct sdma_engine *sdma = sdmac->sdma; > > memcpy(&sdmac->slave_config, dmaengine_cfg, > sizeof(*dmaengine_cfg)); > > + if (dmaengine_cfg->peripheral_config) { > + struct sdma_peripheral_config *sdmacfg = dmaengine_cfg- > >peripheral_config; > + if (dmaengine_cfg->peripheral_size != sizeof(struct > sdma_peripheral_config)) { > + dev_err(sdma->dev, "Invalid peripheral size %zu, > expected %zu\n", > + dmaengine_cfg->peripheral_size, > + sizeof(struct sdma_peripheral_config)); > + return -EINVAL; > + } > + sdmac->n_fifos_src = sdmacfg->n_fifos_src; > + sdmac->n_fifos_dst = sdmacfg->n_fifos_dst; > + sdmac->sw_done = sdmacfg->sw_done; > + } > + > /* Set ENBLn earlier to make sure dma request triggered after that */ > if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events) > return -EINVAL; > diff --git a/include/linux/platform_data/dma-imx.h > b/include/linux/platform_data/dma-imx.h > index 281adbb26e6bd..4a43a048e1b4d 100644 > --- a/include/linux/platform_data/dma-imx.h > +++ b/include/linux/platform_data/dma-imx.h > @@ -39,6 +39,7 @@ enum sdma_peripheral_type { > IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ > IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ > IMX_DMATYPE_SAI, /* SAI */ > + IMX_DMATYPE_MULTI_SAI, /* MULTI FIFOs For Audio */ > }; > > enum imx_dma_prio { > @@ -65,4 +66,10 @@ static inline int imx_dma_is_general_purpose(struct > dma_chan *chan) > !strcmp(chan->device->dev->driver->name, "imx-dma"); } > > +struct sdma_peripheral_config { > + int n_fifos_src; > + int n_fifos_dst; > + bool sw_done; > +}; > + Seems there is issue with my gmail, I resend the comments again. This is our internal definition for this sdma_peripheral_config. Could you please adopt this? /** * struct sdma_audio_config - special sdma config for audio case * @src_fifo_num: source fifo number for mcu_2_sai/sai_2_mcu script * For example, if there are 4 fifos, sdma will fetch * fifos one by one and roll back to the first fifo after * the 4th fifo fetch. * @dst_fifo_num: similar as src_fifo_num, but dest fifo instead. * @src_fifo_off: source fifo offset, 0 means all fifos are continuous, 1 * means 1 word offset between fifos. All offset between * fifos should be same. * @dst_fifo_off: dst fifo offset, similar as @src_fifo_off. * @words_per_fifo: numbers of words per fifo fetch/fill, 0 means * one channel per fifo, 1 means 2 channels per fifo.. * If 'src_fifo_num = 4' and 'chans_per_fifo = 1', it * means the first two words(channels) fetch from fifo1 * and then jump to fifo2 for next two words, and so on * after the last fifo4 fetched, roll back to fifo1. * @sw_done_sel: software done selector, PDM need enable software done feature * in mcu_2_sai/sai_2_mcu script. * Bit31: sw_done eanbled or not * Bit16~Bit0: selector * For example: 0x80000000 means sw_done enabled for done0 * sector which is for PDM on i.mx8mm. */ struct sdma_audio_config { u8 src_fifo_num; u8 dst_fifo_num; u8 src_fifo_off; u8 dst_fifo_off; u8 words_per_fifo; u32 sw_done_sel; }; Best regards Wang shengjiu

1 0

[PATCH v2 0/5] ASoC: mediatek: Add support for MT8195 sound card with max98390 and rt5682
by Trevor Wu 17 Mar '22

17 Mar '22

This series of patches adds support for mt8195 board with mt6359, max98390 and rt5682. To prevent from copy-paste components, mt8195 machine drivers and dt-bindings are merged in the patch. Patches are based on broonie tree "for-next" branch. Changes since v1: - remove merged patches about reset controller - propose a common machine driver instead of machine driver common code - propose a common dt-bindings for mt8195 sound card Trevor Wu (5): ASoC: mediatek: mt8195: merge machine driver ASoC: dt-bindings: mediatek: mt8195: merge mt8195 machine yaml ASoC: mediatek: mt8195: rename card controls ASoC: mediatek: mt8195: add machine support for max98390 and rt5682 ASoC: dt-bindings: mediatek: mt8195: support mt8195-mt6359-max98390-rt5682 .../sound/mt8195-mt6359-rt1011-rt5682.yaml | 51 - ...-rt1019-rt5682.yaml => mt8195-mt6359.yaml} | 9 +- sound/soc/mediatek/Kconfig | 26 +- sound/soc/mediatek/mt8195/Makefile | 3 +- .../mt8195/mt8195-mt6359-rt1011-rt5682.c | 1198 ----------------- ...mt6359-rt1019-rt5682.c => mt8195-mt6359.c} | 984 +++++++++----- 6 files changed, 634 insertions(+), 1637 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml rename Documentation/devicetree/bindings/sound/{mt8195-mt6359-rt1019-rt5682.yaml => mt8195-mt6359.yaml} (84%) delete mode 100644 sound/soc/mediatek/mt8195/mt8195-mt6359-rt1011-rt5682.c rename sound/soc/mediatek/mt8195/{mt8195-mt6359-rt1019-rt5682.c => mt8195-mt6359.c} (76%) -- 2.18.0

2 7

[PATCH 00/18] Introduce IPC abstraction for SOF topology parsing
by Ranjani Sridharan 16 Mar '22

16 Mar '22

This patchset makes the topology parsing layer in the SOF driver IPC-agnostic in preparation for supporting the new IPC version introduced in the SOF firmware. These patches purely contain abstraction changes for the current IPC version (IPC3) supported and do not introduce any functional changes. Ranjani Sridharan (18): ASoC: SOF: Introduce struct snd_sof_dai_link ASoC: SOF: IPC: Introduce IPC ops ASoC: SOF: topology: Add helper function for processing tuple arrays ASoC: SOF: Introduce IPC3 ops ASoC: SOF: topology: Make scheduler widget parsing IPC agnostic ASoC: SOF: topology: Make buffer widget parsing IPC agnostic ASoC: SOF: topology: Make pga widget parsing IPC agnostic ASoC: SOF: topology: Make mixer widget parsing IPC agnostic ASoC: SOF: topology: Make mux/demux widget parsing IPC agnostic ASoC: SOF: topology: Make src widget parsing IPC agnostic ASoC: SOF: topology: Make asrc widget parsing IPC agnostic ASoC: SOF: topology: Make siggen widget parsing IPC agnostic ASoC: SOF: topology: Make effect widget parsing IPC agnostic ASoC: SOF: topology: Make route setup IPC agnostic ASoC: SOF: topology: Make DAI widget parsing IPC agnostic ASoC: SOF: topology: Make control parsing IPC agnostic ASoC: SOF: topology: Make widget binding IPC agnostic ASoC: SOF: topology: remove snd_sof_complete_pipeline() sound/soc/sof/Makefile | 3 +- sound/soc/sof/control.c | 26 +- sound/soc/sof/core.c | 1 + sound/soc/sof/ipc.c | 14 +- sound/soc/sof/ipc3-topology.c | 2019 ++++++++++++++++++++++ sound/soc/sof/sof-audio.c | 66 +- sound/soc/sof/sof-audio.h | 135 +- sound/soc/sof/sof-priv.h | 16 + sound/soc/sof/topology.c | 3060 ++++++++------------------------- 9 files changed, 2941 insertions(+), 2399 deletions(-) create mode 100644 sound/soc/sof/ipc3-topology.c -- 2.25.1

2 21

[PATCH] ASoC: codecs: Fix misplaced lpass_macro_pds_exit call
by Srinivasa Rao Mandadapu 16 Mar '22

16 Mar '22

Update power domains exit function calling from runtime resume to remove function which was wrongly placed and causing crash in device suspend and resume. Fixes: 9e3d83c52844 ("ASoC: codecs: Add power domains support in digital macro codecs") Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> --- sound/soc/codecs/lpass-tx-macro.c | 4 ++-- sound/soc/codecs/lpass-va-macro.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index b492d598..714a411 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -1920,6 +1920,8 @@ static int tx_macro_remove(struct platform_device *pdev) clk_disable_unprepare(tx->npl); clk_disable_unprepare(tx->fsgen); + lpass_macro_pds_exit(tx->pds); + return 0; } @@ -1964,8 +1966,6 @@ static int __maybe_unused tx_macro_runtime_resume(struct device *dev) regcache_sync(tx->regmap); tx->reset_swr = true; - lpass_macro_pds_exit(tx->pds); - return 0; err_fsgen: clk_disable_unprepare(tx->npl); diff --git a/sound/soc/codecs/lpass-va-macro.c b/sound/soc/codecs/lpass-va-macro.c index 300f4f6..f3cb596 100644 --- a/sound/soc/codecs/lpass-va-macro.c +++ b/sound/soc/codecs/lpass-va-macro.c @@ -1503,6 +1503,8 @@ static int va_macro_remove(struct platform_device *pdev) clk_disable_unprepare(va->dcodec); clk_disable_unprepare(va->macro); + lpass_macro_pds_exit(va->pds); + return 0; } @@ -1532,8 +1534,6 @@ static int __maybe_unused va_macro_runtime_resume(struct device *dev) regcache_cache_only(va->regmap, false); regcache_sync(va->regmap); - lpass_macro_pds_exit(va->pds); - return 0; } -- 2.7.4

2 1

[PATCH] ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probe
by Miaoqian Lin 16 Mar '22

16 Mar '22

In the error handling path, the clk_prepare_enable() function call should be balanced by a corresponding 'clk_disable_unprepare()' call , as already done in the remove function. Fixes: de66b3455023 ("ASoC: codecs: msm8916-wcd-analog: add MBHC support") Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- sound/soc/codecs/msm8916-wcd-analog.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c index 485cda46dbb9..e52a559c52d6 100644 --- a/sound/soc/codecs/msm8916-wcd-analog.c +++ b/sound/soc/codecs/msm8916-wcd-analog.c @@ -1222,8 +1222,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev) } irq = platform_get_irq_byname(pdev, "mbhc_switch_int"); - if (irq < 0) - return irq; + if (irq < 0) { + ret = irq; + goto err_disable_clk; + } ret = devm_request_threaded_irq(dev, irq, NULL, pm8916_mbhc_switch_irq_handler, @@ -1235,8 +1237,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev) if (priv->mbhc_btn_enabled) { irq = platform_get_irq_byname(pdev, "mbhc_but_press_det"); - if (irq < 0) - return irq; + if (irq < 0) { + ret = irq; + goto err_disable_clk; + } ret = devm_request_threaded_irq(dev, irq, NULL, mbhc_btn_press_irq_handler, @@ -1247,8 +1251,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev) dev_err(dev, "cannot request mbhc button press irq\n"); irq = platform_get_irq_byname(pdev, "mbhc_but_rel_det"); - if (irq < 0) - return irq; + if (irq < 0) { + ret = irq; + goto err_disable_clk; + } ret = devm_request_threaded_irq(dev, irq, NULL, mbhc_btn_release_irq_handler, @@ -1265,6 +1271,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev) return devm_snd_soc_register_component(dev, &pm8916_wcd_analog, pm8916_wcd_analog_dai, ARRAY_SIZE(pm8916_wcd_analog_dai)); + +err_disable_clk: + clk_disable_unprepare(priv->mclk); + return ret; } static int pm8916_wcd_analog_spmi_remove(struct platform_device *pdev) -- 2.17.1

2 1

[PATCH] ASoC: amd: Fix reference to PCM buffer address
by Meng Tang 16 Mar '22

16 Mar '22

PCM buffers might be allocated dynamically when the buffer preallocation failed or a larger buffer is requested, and it's not guaranteed that substream->dma_buffer points to the actually used buffer. The driver needs to refer to substream->runtime->dma_addr instead for the buffer address. Fixes: cab396d8b22c1 ("ASoC: amd: add ACP5x pcm dma driver ops") Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> --- sound/soc/amd/vangogh/acp5x-pcm-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/amd/vangogh/acp5x-pcm-dma.c b/sound/soc/amd/vangogh/acp5x-pcm-dma.c index 31fa166df98a..d36bb718370f 100644 --- a/sound/soc/amd/vangogh/acp5x-pcm-dma.c +++ b/sound/soc/amd/vangogh/acp5x-pcm-dma.c @@ -281,7 +281,7 @@ static int acp5x_dma_hw_params(struct snd_soc_component *component, return -EINVAL; } size = params_buffer_bytes(params); - rtd->dma_addr = substream->dma_buffer.addr; + rtd->dma_addr = substream->runtime->dma_addr; rtd->num_pages = (PAGE_ALIGN(size) >> PAGE_SHIFT); config_acp5x_dma(rtd, substream->stream); return 0; -- 2.20.1

2 1

[PATCH] ASoC: mediatek: mt8195: Fix error handling in mt8195_mt6359_rt1019_rt5682_dev_probe
by Miaoqian Lin 16 Mar '22

16 Mar '22

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path. Fixes: 082482a50227 ("ASoC: mediatek: mt8195: release device_node after snd_soc_register_card") Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c index 29c2d3407cc7..e3146311722f 100644 --- a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c +++ b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c @@ -1342,7 +1342,8 @@ static int mt8195_mt6359_rt1019_rt5682_dev_probe(struct platform_device *pdev) "mediatek,dai-link"); if (ret) { dev_dbg(&pdev->dev, "Parse dai-link fail\n"); - return -EINVAL; + ret = -EINVAL; + goto put_node; } } else { if (!sof_on) @@ -1398,6 +1399,7 @@ static int mt8195_mt6359_rt1019_rt5682_dev_probe(struct platform_device *pdev) ret = devm_snd_soc_register_card(&pdev->dev, card); +put_node: of_node_put(platform_node); of_node_put(adsp_node); of_node_put(dp_node); -- 2.17.1

2 1

[PATCH] ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data
by Miaoqian Lin 16 Mar '22

16 Mar '22

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This is similar to commit 64b92de9603f ("ASoC: wcd9335: fix a leaked reference by adding missing of_node_put") Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- sound/soc/codecs/wcd934x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c index 6c468527fec6..acd344c4a37a 100644 --- a/sound/soc/codecs/wcd934x.c +++ b/sound/soc/codecs/wcd934x.c @@ -5883,6 +5883,7 @@ static int wcd934x_codec_parse_data(struct wcd934x_codec *wcd) } wcd->sidev = of_slim_get_device(wcd->sdev->ctrl, ifc_dev_np); + of_node_put(ifc_dev_np); if (!wcd->sidev) { dev_err(dev, "Unable to get SLIM Interface device\n"); return -EINVAL; -- 2.17.1

2 1

[PATCH] ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe
by Miaoqian Lin 16 Mar '22

16 Mar '22

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path. Fixes: fdbcb3cba54b ("ASoC: atmel: machine driver for at91sam9x5-wm8731 boards") Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- sound/soc/atmel/sam9x5_wm8731.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c index 7c45dc4f8c1b..99310e40e7a6 100644 --- a/sound/soc/atmel/sam9x5_wm8731.c +++ b/sound/soc/atmel/sam9x5_wm8731.c @@ -142,7 +142,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) if (!cpu_np) { dev_err(&pdev->dev, "atmel,ssc-controller node missing\n"); ret = -EINVAL; - goto out; + goto out_put_codec_np; } dai->cpus->of_node = cpu_np; dai->platforms->of_node = cpu_np; @@ -153,12 +153,9 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) if (ret != 0) { dev_err(&pdev->dev, "Failed to set SSC %d for audio: %d\n", ret, priv->ssc_id); - goto out; + goto out_put_cpu_np; } - of_node_put(codec_np); - of_node_put(cpu_np); - ret = devm_snd_soc_register_card(&pdev->dev, card); if (ret) { dev_err(&pdev->dev, "Platform device allocation failed\n"); @@ -167,10 +164,14 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "%s ok\n", __func__); - return ret; + goto out_put_cpu_np; out_put_audio: atmel_ssc_put_audio(priv->ssc_id); +out_put_cpu_np: + of_node_put(cpu_np); +out_put_codec_np: + of_node_put(codec_np); out: return ret; } -- 2.17.1

3 2

[PATCH] ASoC: mediatek: Fix error handling in mt8183_da7219_max98357_dev_probe
by Miaoqian Lin 16 Mar '22

16 Mar '22

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error paths. Fix this by calling of_node_put() in error handling too. Fixes: ebbddc75bbe8 ("ASoC: Mediatek: MT8183: Add machine driver with DA7219") Signed-off-by: Miaoqian Lin <linmq006(a)gmail.com> --- .../mediatek/mt8183/mt8183-da7219-max98357.c | 23 +++++++++++++------ 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c index 718505c75418..f090dee0c7a4 100644 --- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c +++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c @@ -695,8 +695,11 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev) } card = (struct snd_soc_card *)of_device_get_match_data(&pdev->dev); - if (!card) - return -EINVAL; + if (!card) { + ret = -EINVAL; + goto put_platform_node; + } + card->dev = &pdev->dev; hdmi_codec = of_parse_phandle(pdev->dev.of_node, @@ -761,12 +764,15 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev) if (!mt8183_da7219_max98357_headset_dev.dlc.of_node) { dev_err(&pdev->dev, "Property 'mediatek,headset-codec' missing/invalid\n"); - return -EINVAL; + ret = -EINVAL; + goto put_hdmi_codec; } priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; + if (!priv) { + ret = -ENOMEM; + goto put_hdmi_codec; + } snd_soc_card_set_drvdata(card, priv); @@ -775,13 +781,16 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev) ret = PTR_ERR(pinctrl); dev_err(&pdev->dev, "%s failed to select default state %d\n", __func__, ret); - return ret; + goto put_hdmi_codec; } ret = devm_snd_soc_register_card(&pdev->dev, card); - of_node_put(platform_node); + +put_hdmi_codec: of_node_put(hdmi_codec); +put_platform_node: + of_node_put(platform_node); return ret; } -- 2.17.1

3 4

[PATCH] ASoC: ti: Fix spelling mistake "cant" -> "can't"
by Colin Ian King 16 Mar '22

16 Mar '22

There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- sound/soc/ti/omap-dmic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/ti/omap-dmic.c b/sound/soc/ti/omap-dmic.c index a26588e9c3bc..f3eed20611a3 100644 --- a/sound/soc/ti/omap-dmic.c +++ b/sound/soc/ti/omap-dmic.c @@ -474,7 +474,7 @@ static int asoc_dmic_probe(struct platform_device *pdev) dmic->fclk = devm_clk_get(dmic->dev, "fck"); if (IS_ERR(dmic->fclk)) { - dev_err(dmic->dev, "cant get fck\n"); + dev_err(dmic->dev, "can't get fck\n"); return -ENODEV; } -- 2.35.1

4 3

[PATCH] ASoC: sti: Fix deadlock via snd_pcm_stop_xrun() call
by Takashi Iwai 16 Mar '22

16 Mar '22

This is essentially a revert of the commit dc865fb9e7c2 ("ASoC: sti: Use snd_pcm_stop_xrun() helper"), which converted the manual snd_pcm_stop() calls with snd_pcm_stop_xrun(). The commit above introduced a deadlock as snd_pcm_stop_xrun() itself takes the PCM stream lock while the caller already holds it. Since the conversion was done only for consistency reason and the open-call with snd_pcm_stop() to the XRUN state is a correct usage, let's revert the commit back as the fix. Fixes: dc865fb9e7c2 ("ASoC: sti: Use snd_pcm_stop_xrun() helper") Reported-by: Daniel Palmer <daniel(a)0x0f.com> Cc: Arnaud POULIQUEN <arnaud.pouliquen(a)st.com> Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20220315091319.3351522-1-daniel@0x0f.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/soc/sti/uniperif_player.c | 6 +++--- sound/soc/sti/uniperif_reader.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c index 2ed92c990b97..dd9013c47664 100644 --- a/sound/soc/sti/uniperif_player.c +++ b/sound/soc/sti/uniperif_player.c @@ -91,7 +91,7 @@ static irqreturn_t uni_player_irq_handler(int irq, void *dev_id) SET_UNIPERIF_ITM_BCLR_FIFO_ERROR(player); /* Stop the player */ - snd_pcm_stop_xrun(player->substream); + snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN); } ret = IRQ_HANDLED; @@ -105,7 +105,7 @@ static irqreturn_t uni_player_irq_handler(int irq, void *dev_id) SET_UNIPERIF_ITM_BCLR_DMA_ERROR(player); /* Stop the player */ - snd_pcm_stop_xrun(player->substream); + snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN); ret = IRQ_HANDLED; } @@ -138,7 +138,7 @@ static irqreturn_t uni_player_irq_handler(int irq, void *dev_id) dev_err(player->dev, "Underflow recovery failed\n"); /* Stop the player */ - snd_pcm_stop_xrun(player->substream); + snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN); ret = IRQ_HANDLED; } diff --git a/sound/soc/sti/uniperif_reader.c b/sound/soc/sti/uniperif_reader.c index 136059331211..065c5f0d1f5f 100644 --- a/sound/soc/sti/uniperif_reader.c +++ b/sound/soc/sti/uniperif_reader.c @@ -65,7 +65,7 @@ static irqreturn_t uni_reader_irq_handler(int irq, void *dev_id) if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) { dev_err(reader->dev, "FIFO error detected\n"); - snd_pcm_stop_xrun(reader->substream); + snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN); ret = IRQ_HANDLED; } -- 2.31.1

3 2

[PATCH] ASoC: rt1308-sdw: get calibration params after power on
by shumingf＠realtek.com 16 Mar '22

16 Mar '22

From: Shuming Fan <shumingf(a)realtek.com> It will be safe when getting the calibration params after power-on. All powers are ready to read the calibration params from EFUSE. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt1308-sdw.c | 73 +++++++++++++++++++---------------- 1 file changed, 40 insertions(+), 33 deletions(-) diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c index 149a76075c76..1ef836a68a56 100644 --- a/sound/soc/codecs/rt1308-sdw.c +++ b/sound/soc/codecs/rt1308-sdw.c @@ -50,6 +50,8 @@ static bool rt1308_volatile_register(struct device *dev, unsigned int reg) case 0x3008: case 0x300a: case 0xc000: + case 0xc860 ... 0xc863: + case 0xc870 ... 0xc873: return true; default: return false; @@ -159,12 +161,45 @@ static int rt1308_read_prop(struct sdw_slave *slave) return 0; } +static void rt1308_apply_calib_params(struct rt1308_sdw_priv *rt1308) +{ + unsigned int efuse_m_btl_l, efuse_m_btl_r, tmp; + unsigned int efuse_c_btl_l, efuse_c_btl_r; + + /* read efuse to apply calibration parameters */ + regmap_write(rt1308->regmap, 0xc7f0, 0x04); + regmap_write(rt1308->regmap, 0xc7f1, 0xfe); + msleep(100); + regmap_write(rt1308->regmap, 0xc7f0, 0x44); + msleep(20); + regmap_write(rt1308->regmap, 0xc240, 0x10); + + regmap_read(rt1308->regmap, 0xc861, &tmp); + efuse_m_btl_l = tmp; + regmap_read(rt1308->regmap, 0xc860, &tmp); + efuse_m_btl_l = efuse_m_btl_l | (tmp << 8); + regmap_read(rt1308->regmap, 0xc863, &tmp); + efuse_c_btl_l = tmp; + regmap_read(rt1308->regmap, 0xc862, &tmp); + efuse_c_btl_l = efuse_c_btl_l | (tmp << 8); + regmap_read(rt1308->regmap, 0xc871, &tmp); + efuse_m_btl_r = tmp; + regmap_read(rt1308->regmap, 0xc870, &tmp); + efuse_m_btl_r = efuse_m_btl_r | (tmp << 8); + regmap_read(rt1308->regmap, 0xc873, &tmp); + efuse_c_btl_r = tmp; + regmap_read(rt1308->regmap, 0xc872, &tmp); + efuse_c_btl_r = efuse_c_btl_r | (tmp << 8); + dev_dbg(&rt1308->sdw_slave->dev, "%s m_btl_l=0x%x, m_btl_r=0x%x\n", __func__, + efuse_m_btl_l, efuse_m_btl_r); + dev_dbg(&rt1308->sdw_slave->dev, "%s c_btl_l=0x%x, c_btl_r=0x%x\n", __func__, + efuse_c_btl_l, efuse_c_btl_r); +} + static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) { struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); int ret = 0; - unsigned int efuse_m_btl_l, efuse_m_btl_r, tmp; - unsigned int efuse_c_btl_l, efuse_c_btl_r; if (rt1308->hw_init) return 0; @@ -196,37 +231,6 @@ static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) /* sw reset */ regmap_write(rt1308->regmap, RT1308_SDW_RESET, 0); - /* read efuse */ - regmap_write(rt1308->regmap, 0xc360, 0x01); - regmap_write(rt1308->regmap, 0xc361, 0x80); - regmap_write(rt1308->regmap, 0xc7f0, 0x04); - regmap_write(rt1308->regmap, 0xc7f1, 0xfe); - msleep(100); - regmap_write(rt1308->regmap, 0xc7f0, 0x44); - msleep(20); - regmap_write(rt1308->regmap, 0xc240, 0x10); - - regmap_read(rt1308->regmap, 0xc861, &tmp); - efuse_m_btl_l = tmp; - regmap_read(rt1308->regmap, 0xc860, &tmp); - efuse_m_btl_l = efuse_m_btl_l | (tmp << 8); - regmap_read(rt1308->regmap, 0xc863, &tmp); - efuse_c_btl_l = tmp; - regmap_read(rt1308->regmap, 0xc862, &tmp); - efuse_c_btl_l = efuse_c_btl_l | (tmp << 8); - regmap_read(rt1308->regmap, 0xc871, &tmp); - efuse_m_btl_r = tmp; - regmap_read(rt1308->regmap, 0xc870, &tmp); - efuse_m_btl_r = efuse_m_btl_r | (tmp << 8); - regmap_read(rt1308->regmap, 0xc873, &tmp); - efuse_c_btl_r = tmp; - regmap_read(rt1308->regmap, 0xc872, &tmp); - efuse_c_btl_r = efuse_c_btl_r | (tmp << 8); - dev_dbg(&slave->dev, "%s m_btl_l=0x%x, m_btl_r=0x%x\n", __func__, - efuse_m_btl_l, efuse_m_btl_r); - dev_dbg(&slave->dev, "%s c_btl_l=0x%x, c_btl_r=0x%x\n", __func__, - efuse_c_btl_l, efuse_c_btl_r); - /* initial settings */ regmap_write(rt1308->regmap, 0xc103, 0xc0); regmap_write(rt1308->regmap, 0xc030, 0x17); @@ -323,6 +327,8 @@ static int rt1308_classd_event(struct snd_soc_dapm_widget *w, { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct rt1308_sdw_priv *rt1308 = + snd_soc_component_get_drvdata(component); switch (event) { case SND_SOC_DAPM_POST_PMU: @@ -331,6 +337,7 @@ static int rt1308_classd_event(struct snd_soc_dapm_widget *w, RT1308_SDW_OFFSET | (RT1308_POWER_STATUS << 4), 0x3, 0x3); msleep(40); + rt1308_apply_calib_params(rt1308); break; case SND_SOC_DAPM_PRE_PMD: snd_soc_component_update_bits(component, -- 2.35.1

3 2

[PATCH v2] ASoC: samsung: i2s: check the return value of kstrdup()
by xkernel.wang＠foxmail.com 16 Mar '22

16 Mar '22

From: Xiaoke Wang <xkernel.wang(a)foxmail.com> kstrdup() is a memory allocation function which can return NULL when some internal memory errors happen. It is better to check the return value of it to catch the error in time. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)canonical.com> Signed-off-by: Xiaoke Wang <xkernel.wang(a)foxmail.com> --- ChangeLog: v1->v2 update the mail list and attach the tag 'Reviewed-by'. sound/soc/samsung/i2s.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 309badc..70c8271 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1349,6 +1349,10 @@ static int i2s_create_secondary_device(struct samsung_i2s_priv *priv) return -ENOMEM; pdev_sec->driver_override = kstrdup("samsung-i2s", GFP_KERNEL); + if (!pdev_sec->driver_override) { + platform_device_put(pdev_sec); + return -ENOMEM; + } ret = platform_device_add(pdev_sec); if (ret < 0) { --

2 1

[PATCH] ASoC: ak4642: Use of_device_get_match_data()
by cgel.zte＠gmail.com 16 Mar '22

16 Mar '22

From: Minghao Chi <chi.minghao(a)zte.com.cn> Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao(a)zte.com.cn> --- sound/soc/codecs/ak4613.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/ak4613.c b/sound/soc/codecs/ak4613.c index 4d2e78101f28..e4c643724dd9 100644 --- a/sound/soc/codecs/ak4613.c +++ b/sound/soc/codecs/ak4613.c @@ -653,15 +653,10 @@ static int ak4613_i2c_probe(struct i2c_client *i2c, struct ak4613_priv *priv; regmap_cfg = NULL; - if (np) { - const struct of_device_id *of_id; - - of_id = of_match_device(ak4613_of_match, dev); - if (of_id) - regmap_cfg = of_id->data; - } else { + if (np) + regmap_cfg = of_device_get_match_data(dev); + else regmap_cfg = (const struct regmap_config *)id->driver_data; - } if (!regmap_cfg) return -EINVAL; -- 2.25.1

2 1

[PATCH -next] ASoC: rockchip: Fix PM usage reference of rockchip_i2s_tdm_resume
by zhangqilong 16 Mar '22

16 Mar '22

pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes:081068fd64140 ("ASoC: rockchip: add support for i2s-tdm controller") Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> --- sound/soc/rockchip/rockchip_i2s_tdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/rockchip/rockchip_i2s_tdm.c b/sound/soc/rockchip/rockchip_i2s_tdm.c index 5f9cb5c4c7f0..d3b710406941 100644 --- a/sound/soc/rockchip/rockchip_i2s_tdm.c +++ b/sound/soc/rockchip/rockchip_i2s_tdm.c @@ -1738,7 +1738,7 @@ static int __maybe_unused rockchip_i2s_tdm_resume(struct device *dev) struct rk_i2s_tdm_dev *i2s_tdm = dev_get_drvdata(dev); int ret; - ret = pm_runtime_get_sync(dev); + ret = pm_runtime_resume_and_get(dev); if (ret < 0) return ret; ret = regcache_sync(i2s_tdm->regmap); -- 2.31.1

3 2

[PATCH v5 00/11] Fix broken usage of driver_override (and kfree of static memory)
by Krzysztof Kozlowski 16 Mar '22

16 Mar '22

Hi, This is a continuation of my old patchset from 2019. [1] Back then, few drivers set driver_override wrong. I fixed Exynos in a different way after discussions. QCOM NGD was not fixed and a new user appeared - IMX SCU. It seems "char *" in driver_override looks too consty, so we tend to make a mistake of storing there string literals. Changes since latest v4 ======================= 1. Correct commit msgs and comments after Andy's review. 2. Re-order code in new helper (patch #1) (Andy). 3. Add tags. Changes since latest v3 ======================= 1. Wrap comments, extend comment in driver_set_override() about newline. 2. Minor commit msg fixes. 3. Add tags. Changes since latest v2 ======================= 1. Make all driver_override fields as "const char *", just like SPI and VDPA. (Mark) 2. Move "count" check to the new helper and add "count" argument. (Michael) 3. Fix typos in docs, patch subject. Extend doc. (Michael, Bjorn) 4. Compare pointers to reduce number of string readings in the helper. 5. Fix clk-imx return value. Changes since latest v1 (not the old 2019 solution): ==================================================== https://lore.kernel.org/all/708eabb1-7b35-d525-d4c3-451d4a3de84f@rasmusvill… 1. Add helper for setting driver_override. 2. Use the helper. Dependencies (and stable): ========================== 1. All patches, including last three fixes, depend on the first patch introducing the helper. 2. The last three commits - fixes - are probably not backportable directly, because of this dependency. I don't know how to express this dependency here, since stable-kernel-rules.rst mentions only commits as possible dependencies. [1] https://lore.kernel.org/all/1550484960-2392-3-git-send-email-krzk@kernel.or… Best regards, Krzysztof Krzysztof Kozlowski (11): driver: platform: Add helper for safer setting of driver_override amba: Use driver_set_override() instead of open-coding fsl-mc: Use driver_set_override() instead of open-coding hv: Use driver_set_override() instead of open-coding PCI: Use driver_set_override() instead of open-coding s390/cio: Use driver_set_override() instead of open-coding spi: Use helper for safer setting of driver_override vdpa: Use helper for safer setting of driver_override clk: imx: scu: Fix kfree() of static memory on setting driver_override slimbus: qcom-ngd: Fix kfree() of static memory on setting driver_override rpmsg: Fix kfree() of static memory on setting driver_override drivers/amba/bus.c | 28 +++-------------- drivers/base/driver.c | 56 +++++++++++++++++++++++++++++++++ drivers/base/platform.c | 28 +++-------------- drivers/bus/fsl-mc/fsl-mc-bus.c | 25 +++------------ drivers/clk/imx/clk-scu.c | 7 ++++- drivers/hv/vmbus_drv.c | 28 +++-------------- drivers/pci/pci-sysfs.c | 28 +++-------------- drivers/rpmsg/rpmsg_core.c | 3 +- drivers/rpmsg/rpmsg_internal.h | 11 +++++-- drivers/rpmsg/rpmsg_ns.c | 14 +++++++-- drivers/s390/cio/cio.h | 6 +++- drivers/s390/cio/css.c | 28 +++-------------- drivers/slimbus/qcom-ngd-ctrl.c | 13 +++++++- drivers/spi/spi.c | 26 +++------------ drivers/vdpa/vdpa.c | 29 +++-------------- include/linux/amba/bus.h | 6 +++- include/linux/device/driver.h | 2 ++ include/linux/fsl/mc.h | 6 ++-- include/linux/hyperv.h | 6 +++- include/linux/pci.h | 6 +++- include/linux/platform_device.h | 6 +++- include/linux/rpmsg.h | 6 ++-- include/linux/spi/spi.h | 2 ++ include/linux/vdpa.h | 4 ++- 24 files changed, 169 insertions(+), 205 deletions(-) -- 2.32.0

2 13

Realtek ALC886: missing analog output sink in PulseAudio since alsa-ucm-conf v1.2.6
by GitHub issues - opened 16 Mar '22

16 Mar '22

alsa-project/alsa-ucm-conf issue #141 was opened from mbey-mw: Running a small system with NixOS resulted in a missing analog output sink in PulseAudio after upgrading the system. When using an older version (1.2.5.1) of alsa-ucm-conf and leaving all other packets identical everything is ok again. Switching to version 1.2.6.3 brings back the missing analog audio sink in PulseAudio. Seems like something changed in alsa-ucm-conf. [alsa-info and more for v1.2.5.1](https://gist.github.com/mbey-mw/53a1911a16277f10778df8e2ea2b8960) [alsa-info and more for v1.2.6.3](https://gist.github.com/mbey-mw/79ecbcd564236e661b05d30212e10330) Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/141 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v11 0/7] Add pin control support for lpass sc7280
by Srinivasa Rao Mandadapu 16 Mar '22

16 Mar '22

This patch series is to split lpass variant common pin control functions and SoC specific functions and to add lpass sc7280 pincontrol support. It also Adds dt-bindings for lpass sc7280 lpass lpi pincontrol. Changes Since V10: -- Modify driver's custom functions with pin control framework generic functions. -- Update sm8250 and sc7280 pin control depedency list in Kconfig. -- Update commit description of few patches. Changes Since V9: -- Add pinctrl groups macro to Kconfig. Changes Since V8: -- Remove redundant headers included in v8. Changes Since V7: -- Update optional clock voting with conditional check. -- Add const to lpi_pinctrl_variant_data structure. -- Update required headers and remove redundant. -- Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL -- Fix typo errors. Changes Since V6: -- Update conditional clock voting to optional clock voting. -- Update Kconfig depends on field with select. -- Fix typo errors. Changes Since V5: -- Create new patch by updating macro name to lpi specific. -- Create new patch by updating lpi pin group structure with core group_desc structure. -- Fix typo errors. -- Sort macros in the make file and configuration file. Changes Since V4: -- Update commit message and description of the chip specific extraction patch. -- Sort macros in kconfig and makefile. -- Update optional clock voting to conditional clock voting. -- Fix typo errors. -- Move to quicinc domain email id's. Changes Since V3: -- Update separate Kconfig fields for sm8250 and sc7280. -- Update module license and description. -- Move static variables to corresponding .c files from header file. Changes Since V2: -- Add new dt-bindings for sc7280 lpi driver. -- Make clock voting change as separate patch. -- Split existing pincontrol driver and make common functions as part of separate file. -- Rename lpass pincontrol lpi dt-bindings to sm8250 specific dt-bindings Changes Since V1: -- Make lpi pinctrl variant data structure as constant -- Add appropriate commit message -- Change signedoff by sequence. Srinivasa Rao Mandadapu (7): dt-bindings: pinctrl: qcom: Update lpass lpi file name to SoC specific dt-bindings: pinctrl: qcom: Add sc7280 lpass lpi pinctrl bindings pinctrl: qcom: Update macro name to LPI specific pinctrl: qcom: Update lpi pin group custiom functions with framework generic functions pinctrl: qcom: Extract chip specific LPASS LPI code pinctrl: qcom: Add SC7280 lpass pin configuration pinctrl: qcom: Update clock voting as optional Tested this on SM8250 MTP with WSA and WCD codecs. Tested-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> .../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 133 --------- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 ++++++++ .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 133 +++++++++ drivers/pinctrl/qcom/Kconfig | 19 ++ drivers/pinctrl/qcom/Makefile | 2 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 309 +++------------------ drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 86 ++++++ drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 168 +++++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 164 +++++++++++ 9 files changed, 731 insertions(+), 398 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c -- 2.7.4

2 11

[PATCH 00/19] migrate to gi docgen
by GitHub pull_request - opened 16 Mar '22

16 Mar '22

alsa-project/alsa-gobject pull request #64 was opened from takaswie: This patcset is to migrate to gi-docgen, which is used by the latest GNOME applications to generate documentation. Additionally, some headers are installed as entry for the other headers in each library. ``` Takashi Sakamoto (19): meson: infer library soname for .pc file meson: obsolete usage of deprecated meson.build_dir() meson: minor code refactoring for include directories meson: code refactoring to remove useless assignments for include headers ctl: add entry header to aggregate header inclusion hwdep: add entry header to aggregate header inclusion rawmidi: add entry header to aggregate header inclusion timer: add entry header to aggregate header inclusion seq: add entry header to aggregate header inclusion ci: remove outdated actions meson: rename gtk_doc option ci: update build environment to use gi-docgen meson: minor code refactoring for option of documentation ctl: migrate to gi-docgen from gtk-doc hwdep: migrate to gi-docgen from gtk-doc rawmidi: migrate to gi-docgen from gtk-doc timer: migrate to gi-docgen from gtk-doc seq: migrate to gi-docgen from gtk-doc doc: install HTML file for index page .github/workflows/build.yml | 90 ++-------------------- README.rst | 8 +- doc/ctl/alsactl.toml.in | 34 ++++++++ doc/ctl/meson.build | 27 +++++++ doc/ctl/overview.md | 5 ++ doc/ctl/urlmap.js | 4 + doc/hwdep/alsahwdep.toml.in | 34 ++++++++ doc/hwdep/meson.build | 27 +++++++ doc/hwdep/overview.md | 7 ++ doc/hwdep/urlmap.js | 4 + doc/index.html.in | 19 +++++ doc/meson.build | 28 ++++++- doc/rawmidi/alsarawmidi.toml.in | 34 ++++++++ doc/rawmidi/meson.build | 27 +++++++ doc/rawmidi/overview.md | 6 ++ doc/rawmidi/urlmap.js | 4 + doc/reference/ctl/alsactl-docs.xml | 51 ------------ doc/reference/ctl/alsactl.types | 10 --- doc/reference/ctl/meson.build | 10 --- doc/reference/hwdep/alsahwdep-docs.xml | 47 ----------- doc/reference/hwdep/alsahwdep.types | 1 - doc/reference/hwdep/meson.build | 10 --- doc/reference/meson.build | 14 ---- doc/reference/rawmidi/alsarawmidi-docs.xml | 49 ------------ doc/reference/rawmidi/alsarawmidi.types | 6 -- doc/reference/rawmidi/meson.build | 10 --- doc/reference/seq/alsaseq-docs.xml | 65 ---------------- doc/reference/seq/alsaseq.types | 37 --------- doc/reference/seq/meson.build | 10 --- doc/reference/timer/alsatimer-docs.xml | 56 -------------- doc/reference/timer/alsatimer.types | 18 ----- doc/reference/timer/meson.build | 10 --- doc/reference/version.xml.in | 1 - doc/seq/alsaseq.toml.in | 40 ++++++++++ doc/seq/meson.build | 28 +++++++ doc/seq/overview.md | 6 ++ doc/seq/urlmap.js | 5 ++ doc/timer/alsatimer.toml.in | 34 ++++++++ doc/timer/meson.build | 27 +++++++ doc/timer/overview.md | 6 ++ doc/timer/urlmap.js | 4 + meson.build | 6 +- meson_options.txt | 2 +- src/ctl/alsactl-enum-types.h | 2 - src/ctl/alsactl.h | 24 ++++++ src/ctl/card-info.h | 3 +- src/ctl/card.c | 2 - src/ctl/card.h | 10 +-- src/ctl/elem-id.h | 7 +- src/ctl/elem-info.h | 7 +- src/ctl/elem-value.h | 5 +- src/ctl/meson.build | 45 +++++------ src/ctl/privates.h | 12 +-- src/ctl/query.c | 1 - src/ctl/query.h | 3 +- src/hwdep/alsahwdep-enum-types.h | 1 - src/hwdep/alsahwdep.h | 17 ++++ src/hwdep/device-info.h | 5 +- src/hwdep/meson.build | 55 ++++++------- src/hwdep/privates.h | 4 +- src/hwdep/query.c | 1 - src/hwdep/query.h | 5 +- src/meson.build | 2 + src/rawmidi/alsarawmidi-enum-types.h | 2 - src/rawmidi/alsarawmidi.h | 21 +++++ src/rawmidi/meson.build | 44 +++++------ src/rawmidi/privates.h | 11 +-- src/rawmidi/query.c | 1 - src/rawmidi/query.h | 6 +- src/rawmidi/stream-pair.c | 2 - src/rawmidi/stream-pair.h | 8 +- src/rawmidi/substream-info.h | 5 +- src/rawmidi/substream-params.h | 3 +- src/rawmidi/substream-status.h | 3 +- src/seq/addr.c | 2 +- src/seq/addr.h | 5 +- src/seq/alsaseq-enum-types.h | 2 - src/seq/alsaseq.h | 38 +++++++++ src/seq/client-info.h | 5 +- src/seq/client-pool.h | 3 +- src/seq/event-cntr.h | 12 +-- src/seq/event-data-connect.c | 2 +- src/seq/event-data-connect.h | 7 +- src/seq/event-data-ctl.c | 2 +- src/seq/event-data-ctl.h | 7 +- src/seq/event-data-note.c | 2 +- src/seq/event-data-note.h | 5 +- src/seq/event-data-queue.c | 2 +- src/seq/event-data-queue.h | 7 +- src/seq/event-data-result.c | 2 +- src/seq/event-data-result.h | 7 +- src/seq/meson.build | 46 +++++------ src/seq/port-info.h | 6 +- src/seq/privates.h | 18 +---- src/seq/query.c | 1 - src/seq/query.h | 11 +-- src/seq/queue-info.h | 3 +- src/seq/queue-status.h | 3 +- src/seq/queue-tempo.h | 3 +- src/seq/queue-timer-data-alsa.c | 2 +- src/seq/queue-timer-data-alsa.h | 6 +- src/seq/queue-timer.c | 4 +- src/seq/queue-timer.h | 6 +- src/seq/remove-filter.c | 1 - src/seq/remove-filter.h | 8 +- src/seq/subscribe-data.h | 6 +- src/seq/system-info.h | 3 +- src/seq/tstamp.c | 2 +- src/seq/tstamp.h | 5 +- src/seq/user-client.c | 2 - src/seq/user-client.h | 13 +--- src/timer/alsatimer-enum-types.h | 2 - src/timer/alsatimer.h | 28 +++++++ src/timer/device-id.c | 2 +- src/timer/device-id.h | 7 +- src/timer/device-info.h | 5 +- src/timer/device-params.h | 5 +- src/timer/device-status.h | 3 +- src/timer/event-data-tick.c | 1 - src/timer/event-data-tick.h | 5 +- src/timer/event-data-tstamp.c | 1 - src/timer/event-data-tstamp.h | 7 +- src/timer/event.c | 2 +- src/timer/event.h | 6 +- src/timer/instance-info.h | 5 +- src/timer/instance-params.c | 3 - src/timer/instance-params.h | 5 +- src/timer/instance-status.c | 4 +- src/timer/instance-status.h | 3 +- src/timer/meson.build | 38 +++++---- src/timer/privates.h | 9 +-- src/timer/query.c | 2 - src/timer/query.h | 10 +-- src/timer/user-instance.c | 2 - src/timer/user-instance.h | 9 +-- tests/meson.build | 4 +- 136 files changed, 738 insertions(+), 927 deletions(-) create mode 100644 doc/ctl/alsactl.toml.in create mode 100644 doc/ctl/meson.build create mode 100644 doc/ctl/overview.md create mode 100644 doc/ctl/urlmap.js create mode 100644 doc/hwdep/alsahwdep.toml.in create mode 100644 doc/hwdep/meson.build create mode 100644 doc/hwdep/overview.md create mode 100644 doc/hwdep/urlmap.js create mode 100644 doc/index.html.in create mode 100644 doc/rawmidi/alsarawmidi.toml.in create mode 100644 doc/rawmidi/meson.build create mode 100644 doc/rawmidi/overview.md create mode 100644 doc/rawmidi/urlmap.js delete mode 100644 doc/reference/ctl/alsactl-docs.xml delete mode 100644 doc/reference/ctl/alsactl.types delete mode 100644 doc/reference/ctl/meson.build delete mode 100644 doc/reference/hwdep/alsahwdep-docs.xml delete mode 100644 doc/reference/hwdep/alsahwdep.types delete mode 100644 doc/reference/hwdep/meson.build delete mode 100644 doc/reference/meson.build delete mode 100644 doc/reference/rawmidi/alsarawmidi-docs.xml delete mode 100644 doc/reference/rawmidi/alsarawmidi.types delete mode 100644 doc/reference/rawmidi/meson.build delete mode 100644 doc/reference/seq/alsaseq-docs.xml delete mode 100644 doc/reference/seq/alsaseq.types delete mode 100644 doc/reference/seq/meson.build delete mode 100644 doc/reference/timer/alsatimer-docs.xml delete mode 100644 doc/reference/timer/alsatimer.types delete mode 100644 doc/reference/timer/meson.build delete mode 100644 doc/reference/version.xml.in create mode 100644 doc/seq/alsaseq.toml.in create mode 100644 doc/seq/meson.build create mode 100644 doc/seq/overview.md create mode 100644 doc/seq/urlmap.js create mode 100644 doc/timer/alsatimer.toml.in create mode 100644 doc/timer/meson.build create mode 100644 doc/timer/overview.md create mode 100644 doc/timer/urlmap.js create mode 100644 src/ctl/alsactl.h create mode 100644 src/hwdep/alsahwdep.h create mode 100644 src/rawmidi/alsarawmidi.h create mode 100644 src/seq/alsaseq.h create mode 100644 src/timer/alsatimer.h -- 2.34.1 ``` Request URL : https://github.com/alsa-project/alsa-gobject/pull/64 Patch URL : https://github.com/alsa-project/alsa-gobject/pull/64.patch Repository URL: https://github.com/alsa-project/alsa-gobject

1 0

[PATCH 0/3] fix v0.2.1
by GitHub pull_request - opened 16 Mar '22

16 Mar '22

alsa-project/alsa-gobject pull request #63 was opened from takaswie: The v0.2.1 release includes misfunction of ALSACtl.Card.get_elem_id_list(). This patchset includes fix for it as well as arrangement for GLib 2.0 v2.68. ``` Takashi Sakamoto (3): ctl/hwdep/rawmidi: fix uninitialized warning ctl/timer/seq: optimization for GLib v2.68 ctl: fix misfunction of alsactl_get_card_id_list() src/ctl/elem-id.c | 10 +++++++++- src/ctl/query.c | 2 +- src/hwdep/query.c | 2 +- src/rawmidi/query.c | 2 +- src/seq/addr.c | 10 +++++++++- src/seq/event-data-connect.c | 10 +++++++++- src/seq/event-data-ctl.c | 10 +++++++++- src/seq/event-data-note.c | 10 +++++++++- src/seq/event-data-queue.c | 10 +++++++++- src/seq/event-data-result.c | 10 +++++++++- src/seq/queue-timer-data-alsa.c | 10 +++++++++- src/seq/remove-filter.c | 10 +++++++++- src/seq/tstamp.c | 10 +++++++++- src/timer/device-id.c | 10 +++++++++- src/timer/event-data-tick.c | 10 +++++++++- src/timer/event-data-tstamp.c | 10 +++++++++- src/timer/event.c | 10 +++++++++- 17 files changed, 129 insertions(+), 17 deletions(-) ``` Request URL : https://github.com/alsa-project/alsa-gobject/pull/63 Patch URL : https://github.com/alsa-project/alsa-gobject/pull/63.patch Repository URL: https://github.com/alsa-project/alsa-gobject

1 0

[PATCH v4 00/11] Fix broken usage of driver_override (and kfree of static memory)
by Krzysztof Kozlowski 15 Mar '22

15 Mar '22

Hi, This is a continuation of my old patchset from 2019. [1] Back then, few drivers set driver_override wrong. I fixed Exynos in a different way after discussions. QCOM NGD was not fixed and a new user appeared - IMX SCU. It seems "char *" in driver_override looks too consty, so we tend to make a mistake of storing there string literals. Changes since latest v3 ======================= 1. Wrap comments, extend comment in driver_set_override() about newline. 2. Minor commit msg fixes. 3. Add tags. Changes since latest v2 ======================= 1. Make all driver_override fields as "const char *", just like SPI and VDPA. (Mark) 2. Move "count" check to the new helper and add "count" argument. (Michael) 3. Fix typos in docs, patch subject. Extend doc. (Michael, Bjorn) 4. Compare pointers to reduce number of string readings in the helper. 5. Fix clk-imx return value. Changes since latest v1 (not the old 2019 solution): ==================================================== https://lore.kernel.org/all/708eabb1-7b35-d525-d4c3-451d4a3de84f@rasmusvill… 1. Add helper for setting driver_override. 2. Use the helper. Dependencies, merging and stable ================================ 1. All patches, including last three fixes, depend on the first patch introducing the helper. 2. Merging idea: everything via driver core (Greg KH?). 2. The last three commits - fixes - are probably not backportable directly, because of this dependency. I don't know how to express this dependency here, since stable-kernel-rules.rst mentions only commits as possible dependencies. [1] https://lore.kernel.org/all/1550484960-2392-3-git-send-email-krzk@kernel.or… Best regards, Krzysztof Krzysztof Kozlowski (11): driver: platform: Add helper for safer setting of driver_override amba: Use driver_set_override() instead of open-coding fsl-mc: Use driver_set_override() instead of open-coding hv: Use driver_set_override() instead of open-coding PCI: Use driver_set_override() instead of open-coding s390/cio: Use driver_set_override() instead of open-coding spi: Use helper for safer setting of driver_override vdpa: Use helper for safer setting of driver_override clk: imx: scu: Fix kfree() of static memory on setting driver_override slimbus: qcom-ngd: Fix kfree() of static memory on setting driver_override rpmsg: Fix kfree() of static memory on setting driver_override drivers/amba/bus.c | 28 +++-------------- drivers/base/driver.c | 56 +++++++++++++++++++++++++++++++++ drivers/base/platform.c | 28 +++-------------- drivers/bus/fsl-mc/fsl-mc-bus.c | 25 +++------------ drivers/clk/imx/clk-scu.c | 7 ++++- drivers/hv/vmbus_drv.c | 28 +++-------------- drivers/pci/pci-sysfs.c | 28 +++-------------- drivers/rpmsg/rpmsg_core.c | 3 +- drivers/rpmsg/rpmsg_internal.h | 13 ++++++-- drivers/rpmsg/rpmsg_ns.c | 14 +++++++-- drivers/s390/cio/cio.h | 6 +++- drivers/s390/cio/css.c | 28 +++-------------- drivers/slimbus/qcom-ngd-ctrl.c | 13 +++++++- drivers/spi/spi.c | 26 +++------------ drivers/vdpa/vdpa.c | 29 +++-------------- include/linux/amba/bus.h | 6 +++- include/linux/device/driver.h | 2 ++ include/linux/fsl/mc.h | 6 ++-- include/linux/hyperv.h | 6 +++- include/linux/pci.h | 6 +++- include/linux/platform_device.h | 6 +++- include/linux/rpmsg.h | 6 ++-- include/linux/spi/spi.h | 2 ++ include/linux/vdpa.h | 4 ++- 24 files changed, 171 insertions(+), 205 deletions(-) -- 2.32.0

5 18

[PATCH] ASoC: sti: sti_uniperif: Remove driver
by Daniel Palmer 15 Mar '22

15 Mar '22

This driver seems to be in the "only good for attracting bot generated patches" phase of it's life. It doesn't seem like anyone actually tested the patches that have been applied in the last few years as uni_reader_irq_handler() had a dead lock added to it (it locks the stream, then calls snd_pcm_stop_xrun() which will also lock the stream). Seems best just to remove it. Signed-off-by: Daniel Palmer <daniel(a)0x0f.com> --- I've never used this driver, don't have the hardware etc. I just noticed that this looks broken when debugging my own driver that uses snd_pcm_stop_xrun() and was looking at other users to see if I was using it wrong and noticed this was the only place that locked the stream before calling snd_pcm_stop_xrun(). There are probably some other bits of the driver that should be removed but I didn't look that hard. TL;DR; This driver seems broken, seems like nobody uses it. Maybe it should be deleted? .../bindings/sound/st,sti-asoc-card.txt | 164 -- MAINTAINERS | 7 - sound/soc/sti/Kconfig | 12 - sound/soc/sti/Makefile | 5 - sound/soc/sti/sti_uniperif.c | 506 ------ sound/soc/sti/uniperif.h | 1416 ----------------- sound/soc/sti/uniperif_player.c | 1148 ------------- sound/soc/sti/uniperif_reader.c | 436 ----- 8 files changed, 3694 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt delete mode 100644 sound/soc/sti/Kconfig delete mode 100644 sound/soc/sti/Makefile delete mode 100644 sound/soc/sti/sti_uniperif.c delete mode 100644 sound/soc/sti/uniperif.h delete mode 100644 sound/soc/sti/uniperif_player.c delete mode 100644 sound/soc/sti/uniperif_reader.c diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt deleted file mode 100644 index a6ffcdec6f6a..000000000000 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ /dev/null @@ -1,164 +0,0 @@ -STMicroelectronics sti ASoC cards - -The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas -codec or external codecs. - -sti sound drivers allows to expose sti SoC audio interface through the -generic ASoC simple card. For details about sound card declaration please refer to -Documentation/devicetree/bindings/sound/simple-card.yaml. - -1) sti-uniperiph-dai: audio dai device. ---------------------------------------- - -Required properties: - - compatible: "st,stih407-uni-player-hdmi", "st,stih407-uni-player-pcm-out", - "st,stih407-uni-player-dac", "st,stih407-uni-player-spdif", - "st,stih407-uni-reader-pcm_in", "st,stih407-uni-reader-hdmi", - - - st,syscfg: phandle to boot-device system configuration registers - - - clock-names: name of the clocks listed in clocks property in the same order - - - reg: CPU DAI IP Base address and size entries, listed in same - order than the CPU_DAI properties. - - - reg-names: names of the mapped memory regions listed in regs property in - the same order. - - - interrupts: CPU_DAI interrupt line, listed in the same order than the - CPU_DAI properties. - - - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same - order than the CPU_DAI properties. - - - dma-names: identifier string for each DMA request line in the dmas property. - "tx" for "st,sti-uni-player" compatibility - "rx" for "st,sti-uni-reader" compatibility - -Required properties ("st,sti-uni-player" compatibility only): - - clocks: CPU_DAI IP clock source, listed in the same order than the - CPU_DAI properties. - -Optional properties: - - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for - external codecs connection. - - - pinctrl-names: should contain only one value - "default". - - - st,tdm-mode: to declare to set TDM mode for unireader and uniplayer IPs. - Only compartible with IPs in charge of the external I2S/TDM bus. - Should be declared depending on associated codec. - -Example: - - sti_uni_player1: sti-uni-player@8d81000 { - compatible = "st,stih407-uni-player-hdmi"; - #sound-dai-cells = <0>; - st,syscfg = <&syscfg_core>; - clocks = <&clk_s_d0_flexgen CLK_PCM_1>; - reg = <0x8D81000 0x158>; - interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; - dmas = <&fdma0 3 0 1>; - dma-names = "tx"; - st,tdm-mode = <1>; - }; - - sti_uni_player2: sti-uni-player@8d82000 { - compatible = "st,stih407-uni-player-pcm-out"; - #sound-dai-cells = <0>; - st,syscfg = <&syscfg_core>; - clocks = <&clk_s_d0_flexgen CLK_PCM_2>; - reg = <0x8D82000 0x158>; - interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; - dmas = <&fdma0 4 0 1>; - dma-names = "tx"; - }; - - sti_uni_player3: sti-uni-player@8d85000 { - compatible = "st,stih407-uni-player-spdif"; - #sound-dai-cells = <0>; - st,syscfg = <&syscfg_core>; - clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; - reg = <0x8D85000 0x158>; - interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; - dmas = <&fdma0 7 0 1>; - dma-names = "tx"; - }; - - sti_uni_reader1: sti-uni-reader@8d84000 { - compatible = "st,stih407-uni-reader-hdmi"; - #sound-dai-cells = <0>; - st,syscfg = <&syscfg_core>; - reg = <0x8D84000 0x158>; - interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>; - dmas = <&fdma0 6 0 1>; - dma-names = "rx"; - }; - -2) sti-sas-codec: internal audio codec IPs driver -------------------------------------------------- - -Required properties: - - compatible: "st,sti<chip>-sas-codec" . - Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec" - - - st,syscfg: phandle to boot-device system configuration registers. - - - pinctrl-0: SPDIF PIO description. - - - pinctrl-names: should contain only one value - "default". - -Example: - sti_sas_codec: sti-sas-codec { - compatible = "st,stih407-sas-codec"; - #sound-dai-cells = <1>; - st,reg_audio = <&syscfg_core>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spdif_out >; - }; - -Example of audio card declaration: - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "sti audio card"; - - simple-audio-card,dai-link@0 { - /* DAC */ - format = "i2s"; - dai-tdm-slot-width = <32>; - cpu { - sound-dai = <&sti_uni_player2>; - }; - - codec { - sound-dai = <&sti_sasg_codec 1>; - }; - }; - simple-audio-card,dai-link@1 { - /* SPDIF */ - format = "left_j"; - cpu { - sound-dai = <&sti_uni_player3>; - }; - - codec { - sound-dai = <&sti_sasg_codec 0>; - }; - }; - simple-audio-card,dai-link@2 { - /* TDM playback */ - format = "left_j"; - frame-inversion = <1>; - cpu { - sound-dai = <&sti_uni_player1>; - dai-tdm-slot-num = <16>; - dai-tdm-slot-width = <16>; - dai-tdm-slot-tx-mask = - <1 1 1 1 0 0 0 0 0 0 1 1 0 0 1 1>; - }; - - codec { - sound-dai = <&sti_sasg_codec 3>; - }; - }; - }; diff --git a/MAINTAINERS b/MAINTAINERS index e127c2fb08a7..9dede78d02c1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18465,13 +18465,6 @@ F: include/linux/static_call*.h F: kernel/jump_label.c F: kernel/static_call.c -STI AUDIO (ASoC) DRIVERS -M: Arnaud Pouliquen <arnaud.pouliquen(a)foss.st.com> -L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) -S: Maintained -F: Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt -F: sound/soc/sti/ - STI CEC DRIVER M: Alain Volmat <alain.volmat(a)foss.st.com> S: Maintained diff --git a/sound/soc/sti/Kconfig b/sound/soc/sti/Kconfig deleted file mode 100644 index f881da4b6aea..000000000000 --- a/sound/soc/sti/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# STM SoC audio configuration -# -menuconfig SND_SOC_STI - tristate "SoC Audio support for STI System-On-Chip" - depends on SND_SOC - depends on ARCH_STI || COMPILE_TEST - select SND_SOC_GENERIC_DMAENGINE_PCM - help - Say Y if you want to enable ASoC-support for - any of the STI platforms (e.g. STIH416). diff --git a/sound/soc/sti/Makefile b/sound/soc/sti/Makefile deleted file mode 100644 index 787ccb521298..000000000000 --- a/sound/soc/sti/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# STI platform support -snd-soc-sti-objs := sti_uniperif.o uniperif_player.o uniperif_reader.o - -obj-$(CONFIG_SND_SOC_STI) += snd-soc-sti.o diff --git a/sound/soc/sti/sti_uniperif.c b/sound/soc/sti/sti_uniperif.c deleted file mode 100644 index 34668fe3909d..000000000000 --- a/sound/soc/sti/sti_uniperif.c +++ /dev/null @@ -1,506 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) STMicroelectronics SA 2015 - * Authors: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> - * for STMicroelectronics. - */ - -#include <linux/module.h> -#include <linux/pinctrl/consumer.h> -#include <linux/delay.h> - -#include "uniperif.h" - -/* - * User frame size shall be 2, 4, 6 or 8 32-bits words length - * (i.e. 8, 16, 24 or 32 bytes) - * This constraint comes from allowed values for - * UNIPERIF_I2S_FMT_NUM_CH register - */ -#define UNIPERIF_MAX_FRAME_SZ 0x20 -#define UNIPERIF_ALLOWED_FRAME_SZ (0x08 | 0x10 | 0x18 | UNIPERIF_MAX_FRAME_SZ) - -struct sti_uniperiph_dev_data { - unsigned int id; /* Nb available player instances */ - unsigned int version; /* player IP version */ - unsigned int stream; - const char *dai_names; - enum uniperif_type type; -}; - -static const struct sti_uniperiph_dev_data sti_uniplayer_hdmi = { - .id = 0, - .version = SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0, - .stream = SNDRV_PCM_STREAM_PLAYBACK, - .dai_names = "Uni Player #0 (HDMI)", - .type = SND_ST_UNIPERIF_TYPE_HDMI -}; - -static const struct sti_uniperiph_dev_data sti_uniplayer_pcm_out = { - .id = 1, - .version = SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0, - .stream = SNDRV_PCM_STREAM_PLAYBACK, - .dai_names = "Uni Player #1 (PCM OUT)", - .type = SND_ST_UNIPERIF_TYPE_PCM | SND_ST_UNIPERIF_TYPE_TDM, -}; - -static const struct sti_uniperiph_dev_data sti_uniplayer_dac = { - .id = 2, - .version = SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0, - .stream = SNDRV_PCM_STREAM_PLAYBACK, - .dai_names = "Uni Player #2 (DAC)", - .type = SND_ST_UNIPERIF_TYPE_PCM, -}; - -static const struct sti_uniperiph_dev_data sti_uniplayer_spdif = { - .id = 3, - .version = SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0, - .stream = SNDRV_PCM_STREAM_PLAYBACK, - .dai_names = "Uni Player #3 (SPDIF)", - .type = SND_ST_UNIPERIF_TYPE_SPDIF -}; - -static const struct sti_uniperiph_dev_data sti_unireader_pcm_in = { - .id = 0, - .version = SND_ST_UNIPERIF_VERSION_UNI_RDR_1_0, - .stream = SNDRV_PCM_STREAM_CAPTURE, - .dai_names = "Uni Reader #0 (PCM IN)", - .type = SND_ST_UNIPERIF_TYPE_PCM | SND_ST_UNIPERIF_TYPE_TDM, -}; - -static const struct sti_uniperiph_dev_data sti_unireader_hdmi_in = { - .id = 1, - .version = SND_ST_UNIPERIF_VERSION_UNI_RDR_1_0, - .stream = SNDRV_PCM_STREAM_CAPTURE, - .dai_names = "Uni Reader #1 (HDMI IN)", - .type = SND_ST_UNIPERIF_TYPE_PCM, -}; - -static const struct of_device_id snd_soc_sti_match[] = { - { .compatible = "st,stih407-uni-player-hdmi", - .data = &sti_uniplayer_hdmi - }, - { .compatible = "st,stih407-uni-player-pcm-out", - .data = &sti_uniplayer_pcm_out - }, - { .compatible = "st,stih407-uni-player-dac", - .data = &sti_uniplayer_dac - }, - { .compatible = "st,stih407-uni-player-spdif", - .data = &sti_uniplayer_spdif - }, - { .compatible = "st,stih407-uni-reader-pcm_in", - .data = &sti_unireader_pcm_in - }, - { .compatible = "st,stih407-uni-reader-hdmi", - .data = &sti_unireader_hdmi_in - }, - {}, -}; -MODULE_DEVICE_TABLE(of, snd_soc_sti_match); - -int sti_uniperiph_reset(struct uniperif *uni) -{ - int count = 10; - - /* Reset uniperipheral uni */ - SET_UNIPERIF_SOFT_RST_SOFT_RST(uni); - - if (uni->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) { - while (GET_UNIPERIF_SOFT_RST_SOFT_RST(uni) && count) { - udelay(5); - count--; - } - } - - if (!count) { - dev_err(uni->dev, "Failed to reset uniperif\n"); - return -EIO; - } - - return 0; -} - -int sti_uniperiph_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, - unsigned int rx_mask, int slots, - int slot_width) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *uni = priv->dai_data.uni; - int i, frame_size, avail_slots; - - if (!UNIPERIF_TYPE_IS_TDM(uni)) { - dev_err(uni->dev, "cpu dai not in tdm mode\n"); - return -EINVAL; - } - - /* store info in unip context */ - uni->tdm_slot.slots = slots; - uni->tdm_slot.slot_width = slot_width; - /* unip is unidirectionnal */ - uni->tdm_slot.mask = (tx_mask != 0) ? tx_mask : rx_mask; - - /* number of available timeslots */ - for (i = 0, avail_slots = 0; i < uni->tdm_slot.slots; i++) { - if ((uni->tdm_slot.mask >> i) & 0x01) - avail_slots++; - } - uni->tdm_slot.avail_slots = avail_slots; - - /* frame size in bytes */ - frame_size = uni->tdm_slot.avail_slots * uni->tdm_slot.slot_width / 8; - - /* check frame size is allowed */ - if ((frame_size > UNIPERIF_MAX_FRAME_SZ) || - (frame_size & ~(int)UNIPERIF_ALLOWED_FRAME_SZ)) { - dev_err(uni->dev, "frame size not allowed: %d bytes\n", - frame_size); - return -EINVAL; - } - - return 0; -} - -int sti_uniperiph_fix_tdm_chan(struct snd_pcm_hw_params *params, - struct snd_pcm_hw_rule *rule) -{ - struct uniperif *uni = rule->private; - struct snd_interval t; - - t.min = uni->tdm_slot.avail_slots; - t.max = uni->tdm_slot.avail_slots; - t.openmin = 0; - t.openmax = 0; - t.integer = 0; - - return snd_interval_refine(hw_param_interval(params, rule->var), &t); -} - -int sti_uniperiph_fix_tdm_format(struct snd_pcm_hw_params *params, - struct snd_pcm_hw_rule *rule) -{ - struct uniperif *uni = rule->private; - struct snd_mask *maskp = hw_param_mask(params, rule->var); - u64 format; - - switch (uni->tdm_slot.slot_width) { - case 16: - format = SNDRV_PCM_FMTBIT_S16_LE; - break; - case 32: - format = SNDRV_PCM_FMTBIT_S32_LE; - break; - default: - dev_err(uni->dev, "format not supported: %d bits\n", - uni->tdm_slot.slot_width); - return -EINVAL; - } - - maskp->bits[0] &= (u_int32_t)format; - maskp->bits[1] &= (u_int32_t)(format >> 32); - /* clear remaining indexes */ - memset(maskp->bits + 2, 0, (SNDRV_MASK_MAX - 64) / 8); - - if (!maskp->bits[0] && !maskp->bits[1]) - return -EINVAL; - - return 0; -} - -int sti_uniperiph_get_tdm_word_pos(struct uniperif *uni, - unsigned int *word_pos) -{ - int slot_width = uni->tdm_slot.slot_width / 8; - int slots_num = uni->tdm_slot.slots; - unsigned int slots_mask = uni->tdm_slot.mask; - int i, j, k; - unsigned int word16_pos[4]; - - /* word16_pos: - * word16_pos[0] = WORDX_LSB - * word16_pos[1] = WORDX_MSB, - * word16_pos[2] = WORDX+1_LSB - * word16_pos[3] = WORDX+1_MSB - */ - - /* set unip word position */ - for (i = 0, j = 0, k = 0; (i < slots_num) && (k < WORD_MAX); i++) { - if ((slots_mask >> i) & 0x01) { - word16_pos[j] = i * slot_width; - - if (slot_width == 4) { - word16_pos[j + 1] = word16_pos[j] + 2; - j++; - } - j++; - - if (j > 3) { - word_pos[k] = word16_pos[1] | - (word16_pos[0] << 8) | - (word16_pos[3] << 16) | - (word16_pos[2] << 24); - j = 0; - k++; - } - } - } - - return 0; -} - -/* - * sti_uniperiph_dai_create_ctrl - * This function is used to create Ctrl associated to DAI but also pcm device. - * Request is done by front end to associate ctrl with pcm device id - */ -static int sti_uniperiph_dai_create_ctrl(struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *uni = priv->dai_data.uni; - struct snd_kcontrol_new *ctrl; - int i; - - if (!uni->num_ctrls) - return 0; - - for (i = 0; i < uni->num_ctrls; i++) { - /* - * Several Control can have same name. Controls are indexed on - * Uniperipheral instance ID - */ - ctrl = &uni->snd_ctrls[i]; - ctrl->index = uni->id; - ctrl->device = uni->id; - } - - return snd_soc_add_dai_controls(dai, uni->snd_ctrls, uni->num_ctrls); -} - -/* - * DAI - */ -int sti_uniperiph_dai_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *uni = priv->dai_data.uni; - struct snd_dmaengine_dai_dma_data *dma_data; - int transfer_size; - - if (uni->type == SND_ST_UNIPERIF_TYPE_TDM) - /* transfer size = user frame size (in 32-bits FIFO cell) */ - transfer_size = snd_soc_params_to_frame_size(params) / 32; - else - transfer_size = params_channels(params) * UNIPERIF_FIFO_FRAMES; - - dma_data = snd_soc_dai_get_dma_data(dai, substream); - dma_data->maxburst = transfer_size; - - return 0; -} - -int sti_uniperiph_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - - priv->dai_data.uni->daifmt = fmt; - - return 0; -} - -static int sti_uniperiph_suspend(struct snd_soc_component *component) -{ - struct sti_uniperiph_data *priv = snd_soc_component_get_drvdata(component); - struct uniperif *uni = priv->dai_data.uni; - int ret; - - /* The uniperipheral should be in stopped state */ - if (uni->state != UNIPERIF_STATE_STOPPED) { - dev_err(uni->dev, "%s: invalid uni state( %d)\n", - __func__, (int)uni->state); - return -EBUSY; - } - - /* Pinctrl: switch pinstate to sleep */ - ret = pinctrl_pm_select_sleep_state(uni->dev); - if (ret) - dev_err(uni->dev, "%s: failed to select pinctrl state\n", - __func__); - - return ret; -} - -static int sti_uniperiph_resume(struct snd_soc_component *component) -{ - struct sti_uniperiph_data *priv = snd_soc_component_get_drvdata(component); - struct uniperif *uni = priv->dai_data.uni; - int ret; - - if (priv->dai_data.stream == SNDRV_PCM_STREAM_PLAYBACK) { - ret = uni_player_resume(uni); - if (ret) - return ret; - } - - /* pinctrl: switch pinstate to default */ - ret = pinctrl_pm_select_default_state(uni->dev); - if (ret) - dev_err(uni->dev, "%s: failed to select pinctrl state\n", - __func__); - - return ret; -} - -static int sti_uniperiph_dai_probe(struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct sti_uniperiph_dai *dai_data = &priv->dai_data; - - /* DMA settings*/ - if (priv->dai_data.stream == SNDRV_PCM_STREAM_PLAYBACK) - snd_soc_dai_init_dma_data(dai, &dai_data->dma_data, NULL); - else - snd_soc_dai_init_dma_data(dai, NULL, &dai_data->dma_data); - - dai_data->dma_data.addr = dai_data->uni->fifo_phys_address; - dai_data->dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - - return sti_uniperiph_dai_create_ctrl(dai); -} - -static const struct snd_soc_dai_driver sti_uniperiph_dai_template = { - .probe = sti_uniperiph_dai_probe, -}; - -static const struct snd_soc_component_driver sti_uniperiph_dai_component = { - .name = "sti_cpu_dai", - .suspend = sti_uniperiph_suspend, - .resume = sti_uniperiph_resume -}; - -static int sti_uniperiph_cpu_dai_of(struct device_node *node, - struct sti_uniperiph_data *priv) -{ - struct device *dev = &priv->pdev->dev; - struct sti_uniperiph_dai *dai_data = &priv->dai_data; - struct snd_soc_dai_driver *dai = priv->dai; - struct snd_soc_pcm_stream *stream; - struct uniperif *uni; - const struct of_device_id *of_id; - const struct sti_uniperiph_dev_data *dev_data; - const char *mode; - int ret; - - /* Populate data structure depending on compatibility */ - of_id = of_match_node(snd_soc_sti_match, node); - if (!of_id->data) { - dev_err(dev, "data associated to device is missing\n"); - return -EINVAL; - } - dev_data = (struct sti_uniperiph_dev_data *)of_id->data; - - uni = devm_kzalloc(dev, sizeof(*uni), GFP_KERNEL); - if (!uni) - return -ENOMEM; - - uni->id = dev_data->id; - uni->ver = dev_data->version; - - *dai = sti_uniperiph_dai_template; - dai->name = dev_data->dai_names; - - /* Get resources and base address */ - uni->base = devm_platform_get_and_ioremap_resource(priv->pdev, 0, &uni->mem_region); - if (IS_ERR(uni->base)) - return PTR_ERR(uni->base); - - uni->fifo_phys_address = uni->mem_region->start + - UNIPERIF_FIFO_DATA_OFFSET(uni); - - uni->irq = platform_get_irq(priv->pdev, 0); - if (uni->irq < 0) - return -ENXIO; - - uni->type = dev_data->type; - - /* check if player should be configured for tdm */ - if (dev_data->type & SND_ST_UNIPERIF_TYPE_TDM) { - if (!of_property_read_string(node, "st,tdm-mode", &mode)) - uni->type = SND_ST_UNIPERIF_TYPE_TDM; - else - uni->type = SND_ST_UNIPERIF_TYPE_PCM; - } - - dai_data->uni = uni; - dai_data->stream = dev_data->stream; - - if (priv->dai_data.stream == SNDRV_PCM_STREAM_PLAYBACK) { - ret = uni_player_init(priv->pdev, uni); - stream = &dai->playback; - } else { - ret = uni_reader_init(priv->pdev, uni); - stream = &dai->capture; - } - if (ret < 0) - return ret; - - dai->ops = uni->dai_ops; - - stream->stream_name = dai->name; - stream->channels_min = uni->hw->channels_min; - stream->channels_max = uni->hw->channels_max; - stream->rates = uni->hw->rates; - stream->formats = uni->hw->formats; - - return 0; -} - -static const struct snd_dmaengine_pcm_config dmaengine_pcm_config = { - .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, -}; - -static int sti_uniperiph_probe(struct platform_device *pdev) -{ - struct sti_uniperiph_data *priv; - struct device_node *node = pdev->dev.of_node; - int ret; - - /* Allocate the private data and the CPU_DAI array */ - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - priv->dai = devm_kzalloc(&pdev->dev, sizeof(*priv->dai), GFP_KERNEL); - if (!priv->dai) - return -ENOMEM; - - priv->pdev = pdev; - - ret = sti_uniperiph_cpu_dai_of(node, priv); - if (ret < 0) - return ret; - - dev_set_drvdata(&pdev->dev, priv); - - ret = devm_snd_soc_register_component(&pdev->dev, - &sti_uniperiph_dai_component, - priv->dai, 1); - if (ret < 0) - return ret; - - return devm_snd_dmaengine_pcm_register(&pdev->dev, - &dmaengine_pcm_config, 0); -} - -static struct platform_driver sti_uniperiph_driver = { - .driver = { - .name = "sti-uniperiph-dai", - .of_match_table = snd_soc_sti_match, - }, - .probe = sti_uniperiph_probe, -}; -module_platform_driver(sti_uniperiph_driver); - -MODULE_DESCRIPTION("uniperipheral DAI driver"); -MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen(a)st.com>"); -MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/sti/uniperif.h b/sound/soc/sti/uniperif.h deleted file mode 100644 index 2a5de328501c..000000000000 --- a/sound/soc/sti/uniperif.h +++ /dev/null @@ -1,1416 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) STMicroelectronics SA 2015 - * Authors: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> - * for STMicroelectronics. - */ - -#ifndef __SND_ST_AUD_UNIPERIF_H -#define __SND_ST_AUD_UNIPERIF_H - -#include <linux/regmap.h> - -#include <sound/dmaengine_pcm.h> - -/* - * Register access macros - */ - -#define GET_UNIPERIF_REG(ip, offset, shift, mask) \ - ((readl_relaxed(ip->base + offset) >> shift) & mask) -#define SET_UNIPERIF_REG(ip, offset, shift, mask, value) \ - writel_relaxed(((readl_relaxed(ip->base + offset) & \ - ~(mask << shift)) | (((value) & mask) << shift)), ip->base + offset) -#define SET_UNIPERIF_BIT_REG(ip, offset, shift, mask, value) \ - writel_relaxed((((value) & mask) << shift), ip->base + offset) - -/* - * UNIPERIF_SOFT_RST reg - */ - -#define UNIPERIF_SOFT_RST_OFFSET(ip) 0x0000 -#define GET_UNIPERIF_SOFT_RST(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? \ - readl_relaxed(ip->base + UNIPERIF_SOFT_RST_OFFSET(ip)) : 0) -#define SET_UNIPERIF_SOFT_RST(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_SOFT_RST_OFFSET(ip)) - -/* SOFT_RST */ -#define UNIPERIF_SOFT_RST_SOFT_RST_SHIFT(ip) 0x0 -#define UNIPERIF_SOFT_RST_SOFT_RST_MASK(ip) 0x1 -#define SET_UNIPERIF_SOFT_RST_SOFT_RST(ip) \ - SET_UNIPERIF_BIT_REG(ip, \ - UNIPERIF_SOFT_RST_OFFSET(ip), \ - UNIPERIF_SOFT_RST_SOFT_RST_SHIFT(ip), \ - UNIPERIF_SOFT_RST_SOFT_RST_MASK(ip), 1) -#define GET_UNIPERIF_SOFT_RST_SOFT_RST(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_SOFT_RST_OFFSET(ip), \ - UNIPERIF_SOFT_RST_SOFT_RST_SHIFT(ip), \ - UNIPERIF_SOFT_RST_SOFT_RST_MASK(ip)) - -/* - * UNIPERIF_FIFO_DATA reg - */ - -#define UNIPERIF_FIFO_DATA_OFFSET(ip) 0x0004 -#define SET_UNIPERIF_DATA(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_FIFO_DATA_OFFSET(ip)) - -/* - * UNIPERIF_CHANNEL_STA_REGN reg - */ - -#define UNIPERIF_CHANNEL_STA_REGN(ip, n) (0x0060 + (4 * n)) -#define GET_UNIPERIF_CHANNEL_STA_REGN(ip) \ - readl_relaxed(ip->base + UNIPERIF_CHANNEL_STA_REGN(ip, n)) -#define SET_UNIPERIF_CHANNEL_STA_REGN(ip, n, value) \ - writel_relaxed(value, ip->base + \ - UNIPERIF_CHANNEL_STA_REGN(ip, n)) - -#define UNIPERIF_CHANNEL_STA_REG0_OFFSET(ip) 0x0060 -#define GET_UNIPERIF_CHANNEL_STA_REG0(ip) \ - readl_relaxed(ip->base + UNIPERIF_CHANNEL_STA_REG0_OFFSET(ip)) -#define SET_UNIPERIF_CHANNEL_STA_REG0(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_CHANNEL_STA_REG0_OFFSET(ip)) - -#define UNIPERIF_CHANNEL_STA_REG1_OFFSET(ip) 0x0064 -#define GET_UNIPERIF_CHANNEL_STA_REG1(ip) \ - readl_relaxed(ip->base + UNIPERIF_CHANNEL_STA_REG1_OFFSET(ip)) -#define SET_UNIPERIF_CHANNEL_STA_REG1(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_CHANNEL_STA_REG1_OFFSET(ip)) - -#define UNIPERIF_CHANNEL_STA_REG2_OFFSET(ip) 0x0068 -#define GET_UNIPERIF_CHANNEL_STA_REG2(ip) \ - readl_relaxed(ip->base + UNIPERIF_CHANNEL_STA_REG2_OFFSET(ip)) -#define SET_UNIPERIF_CHANNEL_STA_REG2(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_CHANNEL_STA_REG2_OFFSET(ip)) - -#define UNIPERIF_CHANNEL_STA_REG3_OFFSET(ip) 0x006C -#define GET_UNIPERIF_CHANNEL_STA_REG3(ip) \ - readl_relaxed(ip->base + UNIPERIF_CHANNEL_STA_REG3_OFFSET(ip)) -#define SET_UNIPERIF_CHANNEL_STA_REG3(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_CHANNEL_STA_REG3_OFFSET(ip)) - -#define UNIPERIF_CHANNEL_STA_REG4_OFFSET(ip) 0x0070 -#define GET_UNIPERIF_CHANNEL_STA_REG4(ip) \ - readl_relaxed(ip->base + UNIPERIF_CHANNEL_STA_REG4_OFFSET(ip)) -#define SET_UNIPERIF_CHANNEL_STA_REG4(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_CHANNEL_STA_REG4_OFFSET(ip)) - -#define UNIPERIF_CHANNEL_STA_REG5_OFFSET(ip) 0x0074 -#define GET_UNIPERIF_CHANNEL_STA_REG5(ip) \ - readl_relaxed(ip->base + UNIPERIF_CHANNEL_STA_REG5_OFFSET(ip)) -#define SET_UNIPERIF_CHANNEL_STA_REG5(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_CHANNEL_STA_REG5_OFFSET(ip)) - -/* - * UNIPERIF_ITS reg - */ - -#define UNIPERIF_ITS_OFFSET(ip) 0x000C -#define GET_UNIPERIF_ITS(ip) \ - readl_relaxed(ip->base + UNIPERIF_ITS_OFFSET(ip)) - -/* MEM_BLK_READ */ -#define UNIPERIF_ITS_MEM_BLK_READ_SHIFT(ip) 5 -#define UNIPERIF_ITS_MEM_BLK_READ_MASK(ip) \ - (BIT(UNIPERIF_ITS_MEM_BLK_READ_SHIFT(ip))) - -/* FIFO_ERROR */ -#define UNIPERIF_ITS_FIFO_ERROR_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 0 : 8) -#define UNIPERIF_ITS_FIFO_ERROR_MASK(ip) \ - (BIT(UNIPERIF_ITS_FIFO_ERROR_SHIFT(ip))) - -/* DMA_ERROR */ -#define UNIPERIF_ITS_DMA_ERROR_SHIFT(ip) 9 -#define UNIPERIF_ITS_DMA_ERROR_MASK(ip) \ - (BIT(UNIPERIF_ITS_DMA_ERROR_SHIFT(ip))) - -/* UNDERFLOW_REC_DONE */ -#define UNIPERIF_ITS_UNDERFLOW_REC_DONE_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 12) -#define UNIPERIF_ITS_UNDERFLOW_REC_DONE_MASK(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? \ - 0 : (BIT(UNIPERIF_ITS_UNDERFLOW_REC_DONE_SHIFT(ip)))) - -/* UNDERFLOW_REC_FAILED */ -#define UNIPERIF_ITS_UNDERFLOW_REC_FAILED_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 13) -#define UNIPERIF_ITS_UNDERFLOW_REC_FAILED_MASK(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? \ - 0 : (BIT(UNIPERIF_ITS_UNDERFLOW_REC_FAILED_SHIFT(ip)))) - -/* - * UNIPERIF_ITS_BCLR reg - */ - -/* FIFO_ERROR */ -#define UNIPERIF_ITS_BCLR_FIFO_ERROR_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 0 : 8) -#define UNIPERIF_ITS_BCLR_FIFO_ERROR_MASK(ip) \ - (BIT(UNIPERIF_ITS_BCLR_FIFO_ERROR_SHIFT(ip))) -#define SET_UNIPERIF_ITS_BCLR_FIFO_ERROR(ip) \ - SET_UNIPERIF_ITS_BCLR(ip, \ - UNIPERIF_ITS_BCLR_FIFO_ERROR_MASK(ip)) - -#define UNIPERIF_ITS_BCLR_OFFSET(ip) 0x0010 -#define SET_UNIPERIF_ITS_BCLR(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_ITS_BCLR_OFFSET(ip)) - -/* - * UNIPERIF_ITM reg - */ - -#define UNIPERIF_ITM_OFFSET(ip) 0x0018 -#define GET_UNIPERIF_ITM(ip) \ - readl_relaxed(ip->base + UNIPERIF_ITM_OFFSET(ip)) - -/* FIFO_ERROR */ -#define UNIPERIF_ITM_FIFO_ERROR_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 0 : 8) -#define UNIPERIF_ITM_FIFO_ERROR_MASK(ip) \ - (BIT(UNIPERIF_ITM_FIFO_ERROR_SHIFT(ip))) - -/* UNDERFLOW_REC_DONE */ -#define UNIPERIF_ITM_UNDERFLOW_REC_DONE_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 12) -#define UNIPERIF_ITM_UNDERFLOW_REC_DONE_MASK(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? \ - 0 : (BIT(UNIPERIF_ITM_UNDERFLOW_REC_DONE_SHIFT(ip)))) - -/* UNDERFLOW_REC_FAILED */ -#define UNIPERIF_ITM_UNDERFLOW_REC_FAILED_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 13) -#define UNIPERIF_ITM_UNDERFLOW_REC_FAILED_MASK(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? \ - 0 : (BIT(UNIPERIF_ITM_UNDERFLOW_REC_FAILED_SHIFT(ip)))) - -/* - * UNIPERIF_ITM_BCLR reg - */ - -#define UNIPERIF_ITM_BCLR_OFFSET(ip) 0x001c -#define SET_UNIPERIF_ITM_BCLR(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_ITM_BCLR_OFFSET(ip)) - -/* FIFO_ERROR */ -#define UNIPERIF_ITM_BCLR_FIFO_ERROR_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 0 : 8) -#define UNIPERIF_ITM_BCLR_FIFO_ERROR_MASK(ip) \ - (BIT(UNIPERIF_ITM_BCLR_FIFO_ERROR_SHIFT(ip))) -#define SET_UNIPERIF_ITM_BCLR_FIFO_ERROR(ip) \ - SET_UNIPERIF_ITM_BCLR(ip, \ - UNIPERIF_ITM_BCLR_FIFO_ERROR_MASK(ip)) - -/* DMA_ERROR */ -#define UNIPERIF_ITM_BCLR_DMA_ERROR_SHIFT(ip) 9 -#define UNIPERIF_ITM_BCLR_DMA_ERROR_MASK(ip) \ - (BIT(UNIPERIF_ITM_BCLR_DMA_ERROR_SHIFT(ip))) -#define SET_UNIPERIF_ITM_BCLR_DMA_ERROR(ip) \ - SET_UNIPERIF_ITM_BCLR(ip, \ - UNIPERIF_ITM_BCLR_DMA_ERROR_MASK(ip)) - -/* - * UNIPERIF_ITM_BSET reg - */ - -#define UNIPERIF_ITM_BSET_OFFSET(ip) 0x0020 -#define SET_UNIPERIF_ITM_BSET(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_ITM_BSET_OFFSET(ip)) - -/* FIFO_ERROR */ -#define UNIPERIF_ITM_BSET_FIFO_ERROR_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 0 : 8) -#define UNIPERIF_ITM_BSET_FIFO_ERROR_MASK(ip) \ - (BIT(UNIPERIF_ITM_BSET_FIFO_ERROR_SHIFT(ip))) -#define SET_UNIPERIF_ITM_BSET_FIFO_ERROR(ip) \ - SET_UNIPERIF_ITM_BSET(ip, \ - UNIPERIF_ITM_BSET_FIFO_ERROR_MASK(ip)) - -/* MEM_BLK_READ */ -#define UNIPERIF_ITM_BSET_MEM_BLK_READ_SHIFT(ip) 5 -#define UNIPERIF_ITM_BSET_MEM_BLK_READ_MASK(ip) \ - (BIT(UNIPERIF_ITM_BSET_MEM_BLK_READ_SHIFT(ip))) -#define SET_UNIPERIF_ITM_BSET_MEM_BLK_READ(ip) \ - SET_UNIPERIF_ITM_BSET(ip, \ - UNIPERIF_ITM_BSET_MEM_BLK_READ_MASK(ip)) - -/* DMA_ERROR */ -#define UNIPERIF_ITM_BSET_DMA_ERROR_SHIFT(ip) 9 -#define UNIPERIF_ITM_BSET_DMA_ERROR_MASK(ip) \ - (BIT(UNIPERIF_ITM_BSET_DMA_ERROR_SHIFT(ip))) -#define SET_UNIPERIF_ITM_BSET_DMA_ERROR(ip) \ - SET_UNIPERIF_ITM_BSET(ip, \ - UNIPERIF_ITM_BSET_DMA_ERROR_MASK(ip)) - -/* UNDERFLOW_REC_DONE */ -#define UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 12) -#define UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE_MASK(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? \ - 0 : (BIT(UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE_SHIFT(ip)))) -#define SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE(ip) \ - SET_UNIPERIF_ITM_BSET(ip, \ - UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE_MASK(ip)) - -/* UNDERFLOW_REC_FAILED */ -#define UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 13) -#define UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED_MASK(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? \ - 0 : (BIT(UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED_SHIFT(ip)))) -#define SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED(ip) \ - SET_UNIPERIF_ITM_BSET(ip, \ - UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED_MASK(ip)) - -/* - * UNIPERIF_CONFIG reg - */ - -#define UNIPERIF_CONFIG_OFFSET(ip) 0x0040 -#define GET_UNIPERIF_CONFIG(ip) \ - readl_relaxed(ip->base + UNIPERIF_CONFIG_OFFSET(ip)) -#define SET_UNIPERIF_CONFIG(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_CONFIG_OFFSET(ip)) - -/* PARITY_CNTR */ -#define UNIPERIF_CONFIG_PARITY_CNTR_SHIFT(ip) 0 -#define UNIPERIF_CONFIG_PARITY_CNTR_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_PARITY_CNTR(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_PARITY_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_PARITY_CNTR_MASK(ip)) -#define SET_UNIPERIF_CONFIG_PARITY_CNTR_BY_HW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_PARITY_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_PARITY_CNTR_MASK(ip), 0) -#define SET_UNIPERIF_CONFIG_PARITY_CNTR_BY_SW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_PARITY_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_PARITY_CNTR_MASK(ip), 1) - -/* CHANNEL_STA_CNTR */ -#define UNIPERIF_CONFIG_CHANNEL_STA_CNTR_SHIFT(ip) 1 -#define UNIPERIF_CONFIG_CHANNEL_STA_CNTR_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_CHANNEL_STA_CNTR(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_CHANNEL_STA_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_CHANNEL_STA_CNTR_MASK(ip)) -#define SET_UNIPERIF_CONFIG_CHANNEL_STA_CNTR_BY_SW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_CHANNEL_STA_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_CHANNEL_STA_CNTR_MASK(ip), 0) -#define SET_UNIPERIF_CONFIG_CHANNEL_STA_CNTR_BY_HW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_CHANNEL_STA_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_CHANNEL_STA_CNTR_MASK(ip), 1) - -/* USER_DAT_CNTR */ -#define UNIPERIF_CONFIG_USER_DAT_CNTR_SHIFT(ip) 2 -#define UNIPERIF_CONFIG_USER_DAT_CNTR_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_USER_DAT_CNTR(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_USER_DAT_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_USER_DAT_CNTR_MASK(ip)) -#define SET_UNIPERIF_CONFIG_USER_DAT_CNTR_BY_HW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_USER_DAT_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_USER_DAT_CNTR_MASK(ip), 1) -#define SET_UNIPERIF_CONFIG_USER_DAT_CNTR_BY_SW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_USER_DAT_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_USER_DAT_CNTR_MASK(ip), 0) - -/* VALIDITY_DAT_CNTR */ -#define UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_SHIFT(ip) 3 -#define UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_VALIDITY_DAT_CNTR(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_MASK(ip)) -#define SET_UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_BY_SW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_MASK(ip), 0) -#define SET_UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_BY_HW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_SHIFT(ip), \ - UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_MASK(ip), 1) - -/* ONE_BIT_AUD_SUPPORT */ -#define UNIPERIF_CONFIG_ONE_BIT_AUD_SHIFT(ip) 4 -#define UNIPERIF_CONFIG_ONE_BIT_AUD_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_ONE_BIT_AUD(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_ONE_BIT_AUD_SHIFT(ip), \ - UNIPERIF_CONFIG_ONE_BIT_AUD_MASK(ip)) -#define SET_UNIPERIF_CONFIG_ONE_BIT_AUD_DISABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_ONE_BIT_AUD_SHIFT(ip), \ - UNIPERIF_CONFIG_ONE_BIT_AUD_MASK(ip), 0) -#define SET_UNIPERIF_CONFIG_ONE_BIT_AUD_ENABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_ONE_BIT_AUD_SHIFT(ip), \ - UNIPERIF_CONFIG_ONE_BIT_AUD_MASK(ip), 1) - -/* MEMORY_FMT */ -#define UNIPERIF_CONFIG_MEM_FMT_SHIFT(ip) 5 -#define UNIPERIF_CONFIG_MEM_FMT_MASK(ip) 0x1 -#define VALUE_UNIPERIF_CONFIG_MEM_FMT_16_0(ip) 0 -#define VALUE_UNIPERIF_CONFIG_MEM_FMT_16_16(ip) 1 -#define GET_UNIPERIF_CONFIG_MEM_FMT(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_MEM_FMT_SHIFT(ip), \ - UNIPERIF_CONFIG_MEM_FMT_MASK(ip)) -#define SET_UNIPERIF_CONFIG_MEM_FMT(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_MEM_FMT_SHIFT(ip), \ - UNIPERIF_CONFIG_MEM_FMT_MASK(ip), value) -#define SET_UNIPERIF_CONFIG_MEM_FMT_16_0(ip) \ - SET_UNIPERIF_CONFIG_MEM_FMT(ip, \ - VALUE_UNIPERIF_CONFIG_MEM_FMT_16_0(ip)) -#define SET_UNIPERIF_CONFIG_MEM_FMT_16_16(ip) \ - SET_UNIPERIF_CONFIG_MEM_FMT(ip, \ - VALUE_UNIPERIF_CONFIG_MEM_FMT_16_16(ip)) - -/* REPEAT_CHL_STS */ -#define UNIPERIF_CONFIG_REPEAT_CHL_STS_SHIFT(ip) 6 -#define UNIPERIF_CONFIG_REPEAT_CHL_STS_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_REPEAT_CHL_STS(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_REPEAT_CHL_STS_SHIFT(ip), \ - UNIPERIF_CONFIG_REPEAT_CHL_STS_MASK(ip)) -#define SET_UNIPERIF_CONFIG_REPEAT_CHL_STS_ENABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_REPEAT_CHL_STS_SHIFT(ip), \ - UNIPERIF_CONFIG_REPEAT_CHL_STS_MASK(ip), 0) -#define SET_UNIPERIF_CONFIG_REPEAT_CHL_STS_DISABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_REPEAT_CHL_STS_SHIFT(ip), \ - UNIPERIF_CONFIG_REPEAT_CHL_STS_MASK(ip), 1) - -/* BACK_STALL_REQ */ -#define UNIPERIF_CONFIG_BACK_STALL_REQ_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 7 : -1) -#define UNIPERIF_CONFIG_BACK_STALL_REQ_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_BACK_STALL_REQ(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_BACK_STALL_REQ_SHIFT(ip), \ - UNIPERIF_CONFIG_BACK_STALL_REQ_MASK(ip)) -#define SET_UNIPERIF_CONFIG_BACK_STALL_REQ_DISABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_BACK_STALL_REQ_SHIFT(ip), \ - UNIPERIF_CONFIG_BACK_STALL_REQ_MASK(ip), 0) -#define SET_UNIPERIF_CONFIG_BACK_STALL_REQ_ENABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_BACK_STALL_REQ_SHIFT(ip), \ - UNIPERIF_CONFIG_BACK_STALL_REQ_MASK(ip), 1) - -/* FDMA_TRIGGER_LIMIT */ -#define UNIPERIF_CONFIG_DMA_TRIG_LIMIT_SHIFT(ip) 8 -#define UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(ip) 0x7F -#define GET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_DMA_TRIG_LIMIT_SHIFT(ip), \ - UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(ip)) -#define SET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_DMA_TRIG_LIMIT_SHIFT(ip), \ - UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(ip), value) - -/* CHL_STS_UPDATE */ -#define UNIPERIF_CONFIG_CHL_STS_UPDATE_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 16 : -1) -#define UNIPERIF_CONFIG_CHL_STS_UPDATE_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_CHL_STS_UPDATE(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_CHL_STS_UPDATE_SHIFT(ip), \ - UNIPERIF_CONFIG_CHL_STS_UPDATE_MASK(ip)) -#define SET_UNIPERIF_CONFIG_CHL_STS_UPDATE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_CHL_STS_UPDATE_SHIFT(ip), \ - UNIPERIF_CONFIG_CHL_STS_UPDATE_MASK(ip), 1) - -/* IDLE_MOD */ -#define UNIPERIF_CONFIG_IDLE_MOD_SHIFT(ip) 18 -#define UNIPERIF_CONFIG_IDLE_MOD_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_IDLE_MOD(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_IDLE_MOD_SHIFT(ip), \ - UNIPERIF_CONFIG_IDLE_MOD_MASK(ip)) -#define SET_UNIPERIF_CONFIG_IDLE_MOD_DISABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_IDLE_MOD_SHIFT(ip), \ - UNIPERIF_CONFIG_IDLE_MOD_MASK(ip), 0) -#define SET_UNIPERIF_CONFIG_IDLE_MOD_ENABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_IDLE_MOD_SHIFT(ip), \ - UNIPERIF_CONFIG_IDLE_MOD_MASK(ip), 1) - -/* SUBFRAME_SELECTION */ -#define UNIPERIF_CONFIG_SUBFRAME_SEL_SHIFT(ip) 19 -#define UNIPERIF_CONFIG_SUBFRAME_SEL_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_SUBFRAME_SEL(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_SUBFRAME_SEL_SHIFT(ip), \ - UNIPERIF_CONFIG_SUBFRAME_SEL_MASK(ip)) -#define SET_UNIPERIF_CONFIG_SUBFRAME_SEL_SUBF1_SUBF0(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_SUBFRAME_SEL_SHIFT(ip), \ - UNIPERIF_CONFIG_SUBFRAME_SEL_MASK(ip), 1) -#define SET_UNIPERIF_CONFIG_SUBFRAME_SEL_SUBF0_SUBF1(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_SUBFRAME_SEL_SHIFT(ip), \ - UNIPERIF_CONFIG_SUBFRAME_SEL_MASK(ip), 0) - -/* FULL_SW_CONTROL */ -#define UNIPERIF_CONFIG_SPDIF_SW_CTRL_SHIFT(ip) 20 -#define UNIPERIF_CONFIG_SPDIF_SW_CTRL_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_SPDIF_SW_CTRL(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_SPDIF_SW_CTRL_SHIFT(ip), \ - UNIPERIF_CONFIG_SPDIF_SW_CTRL_MASK(ip)) -#define SET_UNIPERIF_CONFIG_SPDIF_SW_CTRL_ENABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_SPDIF_SW_CTRL_SHIFT(ip), \ - UNIPERIF_CONFIG_SPDIF_SW_CTRL_MASK(ip), 1) -#define SET_UNIPERIF_CONFIG_SPDIF_SW_CTRL_DISABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_SPDIF_SW_CTRL_SHIFT(ip), \ - UNIPERIF_CONFIG_SPDIF_SW_CTRL_MASK(ip), 0) - -/* MASTER_CLKEDGE */ -#define UNIPERIF_CONFIG_MSTR_CLKEDGE_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 24 : -1) -#define UNIPERIF_CONFIG_MSTR_CLKEDGE_MASK(ip) 0x1 -#define GET_UNIPERIF_CONFIG_MSTR_CLKEDGE(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_MSTR_CLKEDGE_SHIFT(ip), \ - UNIPERIF_CONFIG_MSTR_CLKEDGE_MASK(ip)) -#define SET_UNIPERIF_CONFIG_MSTR_CLKEDGE_FALLING(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_MSTR_CLKEDGE_SHIFT(ip), \ - UNIPERIF_CONFIG_MSTR_CLKEDGE_MASK(ip), 1) -#define SET_UNIPERIF_CONFIG_MSTR_CLKEDGE_RISING(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CONFIG_OFFSET(ip), \ - UNIPERIF_CONFIG_MSTR_CLKEDGE_SHIFT(ip), \ - UNIPERIF_CONFIG_MSTR_CLKEDGE_MASK(ip), 0) - -/* - * UNIPERIF_CTRL reg - */ - -#define UNIPERIF_CTRL_OFFSET(ip) 0x0044 -#define GET_UNIPERIF_CTRL(ip) \ - readl_relaxed(ip->base + UNIPERIF_CTRL_OFFSET(ip)) -#define SET_UNIPERIF_CTRL(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_CTRL_OFFSET(ip)) - -/* OPERATION */ -#define UNIPERIF_CTRL_OPERATION_SHIFT(ip) 0 -#define UNIPERIF_CTRL_OPERATION_MASK(ip) 0x7 -#define GET_UNIPERIF_CTRL_OPERATION(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_OPERATION_SHIFT(ip), \ - UNIPERIF_CTRL_OPERATION_MASK(ip)) -#define VALUE_UNIPERIF_CTRL_OPERATION_OFF(ip) 0 -#define SET_UNIPERIF_CTRL_OPERATION_OFF(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_OPERATION_SHIFT(ip), \ - UNIPERIF_CTRL_OPERATION_MASK(ip), \ - VALUE_UNIPERIF_CTRL_OPERATION_OFF(ip)) -#define VALUE_UNIPERIF_CTRL_OPERATION_MUTE_PCM_NULL(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 1 : -1) -#define SET_UNIPERIF_CTRL_OPERATION_MUTE_PCM_NULL(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_OPERATION_SHIFT(ip), \ - UNIPERIF_CTRL_OPERATION_MASK(ip), \ - VALUE_UNIPERIF_CTRL_OPERATION_MUTE_PCM_NULL(ip)) -#define VALUE_UNIPERIF_CTRL_OPERATION_MUTE_PAUSE_BURST(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 2 : -1) -#define SET_UNIPERIF_CTRL_OPERATION_MUTE_PAUSE_BURST(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_OPERATION_SHIFT(ip), \ - UNIPERIF_CTRL_OPERATION_MASK(ip), \ - VALUE_UNIPERIF_CTRL_OPERATION_MUTE_PAUSE_BURST(ip)) -#define VALUE_UNIPERIF_CTRL_OPERATION_PCM_DATA(ip) 3 -#define SET_UNIPERIF_CTRL_OPERATION_PCM_DATA(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_OPERATION_SHIFT(ip), \ - UNIPERIF_CTRL_OPERATION_MASK(ip), \ - VALUE_UNIPERIF_CTRL_OPERATION_PCM_DATA(ip)) -/* This is the same as above! */ -#define VALUE_UNIPERIF_CTRL_OPERATION_AUDIO_DATA(ip) 3 -#define SET_UNIPERIF_CTRL_OPERATION_AUDIO_DATA(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_OPERATION_SHIFT(ip), \ - UNIPERIF_CTRL_OPERATION_MASK(ip), \ - VALUE_UNIPERIF_CTRL_OPERATION_AUDIO_DATA(ip)) -#define VALUE_UNIPERIF_CTRL_OPERATION_ENC_DATA(ip) 4 -#define SET_UNIPERIF_CTRL_OPERATION_ENC_DATA(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_OPERATION_SHIFT(ip), \ - UNIPERIF_CTRL_OPERATION_MASK(ip), \ - VALUE_UNIPERIF_CTRL_OPERATION_ENC_DATA(ip)) -#define VALUE_UNIPERIF_CTRL_OPERATION_CD_DATA(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 5 : -1) -#define SET_UNIPERIF_CTRL_OPERATION_CD_DATA(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_OPERATION_SHIFT(ip), \ - UNIPERIF_CTRL_OPERATION_MASK(ip), \ - VALUE_UNIPERIF_CTRL_OPERATION_CD_DATA(ip)) -#define VALUE_UNIPERIF_CTRL_OPERATION_STANDBY(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 7) -#define SET_UNIPERIF_CTRL_OPERATION_STANDBY(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_OPERATION_SHIFT(ip), \ - UNIPERIF_CTRL_OPERATION_MASK(ip), \ - VALUE_UNIPERIF_CTRL_OPERATION_STANDBY(ip)) - -/* EXIT_STBY_ON_EOBLOCK */ -#define UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 3) -#define UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_MASK(ip) 0x1 -#define GET_UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_SHIFT(ip), \ - UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_MASK(ip)) -#define SET_UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_OFF(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_SHIFT(ip), \ - UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_MASK(ip), 0) -#define SET_UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_ON(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_SHIFT(ip), \ - UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_MASK(ip), 1) - -/* ROUNDING */ -#define UNIPERIF_CTRL_ROUNDING_SHIFT(ip) 4 -#define UNIPERIF_CTRL_ROUNDING_MASK(ip) 0x1 -#define GET_UNIPERIF_CTRL_ROUNDING(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_ROUNDING_SHIFT(ip), \ - UNIPERIF_CTRL_ROUNDING_MASK(ip)) -#define SET_UNIPERIF_CTRL_ROUNDING_OFF(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_ROUNDING_SHIFT(ip), \ - UNIPERIF_CTRL_ROUNDING_MASK(ip), 0) -#define SET_UNIPERIF_CTRL_ROUNDING_ON(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_ROUNDING_SHIFT(ip), \ - UNIPERIF_CTRL_ROUNDING_MASK(ip), 1) - -/* DIVIDER */ -#define UNIPERIF_CTRL_DIVIDER_SHIFT(ip) 5 -#define UNIPERIF_CTRL_DIVIDER_MASK(ip) 0xff -#define GET_UNIPERIF_CTRL_DIVIDER(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_DIVIDER_SHIFT(ip), \ - UNIPERIF_CTRL_DIVIDER_MASK(ip)) -#define SET_UNIPERIF_CTRL_DIVIDER(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_DIVIDER_SHIFT(ip), \ - UNIPERIF_CTRL_DIVIDER_MASK(ip), value) - -/* BYTE_SWAP */ -#define UNIPERIF_CTRL_BYTE_SWP_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 13 : -1) -#define UNIPERIF_CTRL_BYTE_SWP_MASK(ip) 0x1 -#define GET_UNIPERIF_CTRL_BYTE_SWP(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_BYTE_SWP_SHIFT(ip), \ - UNIPERIF_CTRL_BYTE_SWP_MASK(ip)) -#define SET_UNIPERIF_CTRL_BYTE_SWP_OFF(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_BYTE_SWP_SHIFT(ip), \ - UNIPERIF_CTRL_BYTE_SWP_MASK(ip), 0) -#define SET_UNIPERIF_CTRL_BYTE_SWP_ON(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_BYTE_SWP_SHIFT(ip), \ - UNIPERIF_CTRL_BYTE_SWP_MASK(ip), 1) - -/* ZERO_STUFFING_HW_SW */ -#define UNIPERIF_CTRL_ZERO_STUFF_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 14 : -1) -#define UNIPERIF_CTRL_ZERO_STUFF_MASK(ip) 0x1 -#define GET_UNIPERIF_CTRL_ZERO_STUFF(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_ZERO_STUFF_SHIFT(ip), \ - UNIPERIF_CTRL_ZERO_STUFF_MASK(ip)) -#define SET_UNIPERIF_CTRL_ZERO_STUFF_HW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_ZERO_STUFF_SHIFT(ip), \ - UNIPERIF_CTRL_ZERO_STUFF_MASK(ip), 1) -#define SET_UNIPERIF_CTRL_ZERO_STUFF_SW(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_ZERO_STUFF_SHIFT(ip), \ - UNIPERIF_CTRL_ZERO_STUFF_MASK(ip), 0) - -/* SPDIF_LAT */ -#define UNIPERIF_CTRL_SPDIF_LAT_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 16 : -1) -#define UNIPERIF_CTRL_SPDIF_LAT_MASK(ip) 0x1 -#define GET_UNIPERIF_CTRL_SPDIF_LAT(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_SPDIF_LAT_SHIFT(ip), \ - UNIPERIF_CTRL_SPDIF_LAT_MASK(ip)) -#define SET_UNIPERIF_CTRL_SPDIF_LAT_ON(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_SPDIF_LAT_SHIFT(ip), \ - UNIPERIF_CTRL_SPDIF_LAT_MASK(ip), 1) -#define SET_UNIPERIF_CTRL_SPDIF_LAT_OFF(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_SPDIF_LAT_SHIFT(ip), \ - UNIPERIF_CTRL_SPDIF_LAT_MASK(ip), 0) - -/* EN_SPDIF_FORMATTING */ -#define UNIPERIF_CTRL_SPDIF_FMT_SHIFT(ip) 17 -#define UNIPERIF_CTRL_SPDIF_FMT_MASK(ip) 0x1 -#define GET_UNIPERIF_CTRL_SPDIF_FMT(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_SPDIF_FMT_SHIFT(ip), \ - UNIPERIF_CTRL_SPDIF_FMT_MASK(ip)) -#define SET_UNIPERIF_CTRL_SPDIF_FMT_ON(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_SPDIF_FMT_SHIFT(ip), \ - UNIPERIF_CTRL_SPDIF_FMT_MASK(ip), 1) -#define SET_UNIPERIF_CTRL_SPDIF_FMT_OFF(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_SPDIF_FMT_SHIFT(ip), \ - UNIPERIF_CTRL_SPDIF_FMT_MASK(ip), 0) - -/* READER_OUT_SELECT */ -#define UNIPERIF_CTRL_READER_OUT_SEL_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 18 : -1) -#define UNIPERIF_CTRL_READER_OUT_SEL_MASK(ip) 0x1 -#define GET_UNIPERIF_CTRL_READER_OUT_SEL(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_READER_OUT_SEL_SHIFT(ip), \ - UNIPERIF_CTRL_READER_OUT_SEL_MASK(ip)) -#define SET_UNIPERIF_CTRL_READER_OUT_SEL_IN_MEM(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_READER_OUT_SEL_SHIFT(ip), \ - UNIPERIF_CTRL_READER_OUT_SEL_MASK(ip), 0) -#define SET_UNIPERIF_CTRL_READER_OUT_SEL_ON_I2S_LINE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_READER_OUT_SEL_SHIFT(ip), \ - UNIPERIF_CTRL_READER_OUT_SEL_MASK(ip), 1) - -/* UNDERFLOW_REC_WINDOW */ -#define UNIPERIF_CTRL_UNDERFLOW_REC_WINDOW_SHIFT(ip) 20 -#define UNIPERIF_CTRL_UNDERFLOW_REC_WINDOW_MASK(ip) 0xff -#define GET_UNIPERIF_CTRL_UNDERFLOW_REC_WINDOW(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_UNDERFLOW_REC_WINDOW_SHIFT(ip), \ - UNIPERIF_CTRL_UNDERFLOW_REC_WINDOW_MASK(ip)) -#define SET_UNIPERIF_CTRL_UNDERFLOW_REC_WINDOW(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_CTRL_OFFSET(ip), \ - UNIPERIF_CTRL_UNDERFLOW_REC_WINDOW_SHIFT(ip), \ - UNIPERIF_CTRL_UNDERFLOW_REC_WINDOW_MASK(ip), value) - -/* - * UNIPERIF_I2S_FMT a.k.a UNIPERIF_FORMAT reg - */ - -#define UNIPERIF_I2S_FMT_OFFSET(ip) 0x0048 -#define GET_UNIPERIF_I2S_FMT(ip) \ - readl_relaxed(ip->base + UNIPERIF_I2S_FMT_OFFSET(ip)) -#define SET_UNIPERIF_I2S_FMT(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_I2S_FMT_OFFSET(ip)) - -/* NBIT */ -#define UNIPERIF_I2S_FMT_NBIT_SHIFT(ip) 0 -#define UNIPERIF_I2S_FMT_NBIT_MASK(ip) 0x1 -#define GET_UNIPERIF_I2S_FMT_NBIT(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_NBIT_SHIFT(ip), \ - UNIPERIF_I2S_FMT_NBIT_MASK(ip)) -#define SET_UNIPERIF_I2S_FMT_NBIT_32(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_NBIT_SHIFT(ip), \ - UNIPERIF_I2S_FMT_NBIT_MASK(ip), 0) -#define SET_UNIPERIF_I2S_FMT_NBIT_16(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_NBIT_SHIFT(ip), \ - UNIPERIF_I2S_FMT_NBIT_MASK(ip), 1) - -/* DATA_SIZE */ -#define UNIPERIF_I2S_FMT_DATA_SIZE_SHIFT(ip) 1 -#define UNIPERIF_I2S_FMT_DATA_SIZE_MASK(ip) 0x7 -#define GET_UNIPERIF_I2S_FMT_DATA_SIZE(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_MASK(ip)) -#define SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_MASK(ip), 0) -#define SET_UNIPERIF_I2S_FMT_DATA_SIZE_18(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_MASK(ip), 1) -#define SET_UNIPERIF_I2S_FMT_DATA_SIZE_20(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_MASK(ip), 2) -#define SET_UNIPERIF_I2S_FMT_DATA_SIZE_24(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_MASK(ip), 3) -#define SET_UNIPERIF_I2S_FMTL_DATA_SIZE_28(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_MASK(ip), 4) -#define SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_DATA_SIZE_MASK(ip), 5) - -/* LR_POL */ -#define UNIPERIF_I2S_FMT_LR_POL_SHIFT(ip) 4 -#define UNIPERIF_I2S_FMT_LR_POL_MASK(ip) 0x1 -#define VALUE_UNIPERIF_I2S_FMT_LR_POL_LOW(ip) 0x0 -#define VALUE_UNIPERIF_I2S_FMT_LR_POL_HIG(ip) 0x1 -#define GET_UNIPERIF_I2S_FMT_LR_POL(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_LR_POL_SHIFT(ip), \ - UNIPERIF_I2S_FMT_LR_POL_MASK(ip)) -#define SET_UNIPERIF_I2S_FMT_LR_POL(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_LR_POL_SHIFT(ip), \ - UNIPERIF_I2S_FMT_LR_POL_MASK(ip), value) -#define SET_UNIPERIF_I2S_FMT_LR_POL_LOW(ip) \ - SET_UNIPERIF_I2S_FMT_LR_POL(ip, \ - VALUE_UNIPERIF_I2S_FMT_LR_POL_LOW(ip)) -#define SET_UNIPERIF_I2S_FMT_LR_POL_HIG(ip) \ - SET_UNIPERIF_I2S_FMT_LR_POL(ip, \ - VALUE_UNIPERIF_I2S_FMT_LR_POL_HIG(ip)) - -/* SCLK_EDGE */ -#define UNIPERIF_I2S_FMT_SCLK_EDGE_SHIFT(ip) 5 -#define UNIPERIF_I2S_FMT_SCLK_EDGE_MASK(ip) 0x1 -#define GET_UNIPERIF_I2S_FMT_SCLK_EDGE(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_SCLK_EDGE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_SCLK_EDGE_MASK(ip)) -#define SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_SCLK_EDGE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_SCLK_EDGE_MASK(ip), 0) -#define SET_UNIPERIF_I2S_FMT_SCLK_EDGE_FALLING(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_SCLK_EDGE_SHIFT(ip), \ - UNIPERIF_I2S_FMT_SCLK_EDGE_MASK(ip), 1) - -/* PADDING */ -#define UNIPERIF_I2S_FMT_PADDING_SHIFT(ip) 6 -#define UNIPERIF_I2S_FMT_PADDING_MASK(ip) 0x1 -#define UNIPERIF_I2S_FMT_PADDING_MASK(ip) 0x1 -#define VALUE_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(ip) 0x0 -#define VALUE_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(ip) 0x1 -#define GET_UNIPERIF_I2S_FMT_PADDING(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_PADDING_SHIFT(ip), \ - UNIPERIF_I2S_FMT_PADDING_MASK(ip)) -#define SET_UNIPERIF_I2S_FMT_PADDING(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_PADDING_SHIFT(ip), \ - UNIPERIF_I2S_FMT_PADDING_MASK(ip), value) -#define SET_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(ip) \ - SET_UNIPERIF_I2S_FMT_PADDING(ip, \ - VALUE_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(ip)) -#define SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(ip) \ - SET_UNIPERIF_I2S_FMT_PADDING(ip, \ - VALUE_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(ip)) - -/* ALIGN */ -#define UNIPERIF_I2S_FMT_ALIGN_SHIFT(ip) 7 -#define UNIPERIF_I2S_FMT_ALIGN_MASK(ip) 0x1 -#define GET_UNIPERIF_I2S_FMT_ALIGN(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_ALIGN_SHIFT(ip), \ - UNIPERIF_I2S_FMT_ALIGN_MASK(ip)) -#define SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_ALIGN_SHIFT(ip), \ - UNIPERIF_I2S_FMT_ALIGN_MASK(ip), 0) -#define SET_UNIPERIF_I2S_FMT_ALIGN_RIGHT(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_ALIGN_SHIFT(ip), \ - UNIPERIF_I2S_FMT_ALIGN_MASK(ip), 1) - -/* ORDER */ -#define UNIPERIF_I2S_FMT_ORDER_SHIFT(ip) 8 -#define UNIPERIF_I2S_FMT_ORDER_MASK(ip) 0x1 -#define GET_UNIPERIF_I2S_FMT_ORDER(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_ORDER_SHIFT(ip), \ - UNIPERIF_I2S_FMT_ORDER_MASK(ip)) -#define SET_UNIPERIF_I2S_FMT_ORDER_LSB(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_ORDER_SHIFT(ip), \ - UNIPERIF_I2S_FMT_ORDER_MASK(ip), 0) -#define SET_UNIPERIF_I2S_FMT_ORDER_MSB(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_ORDER_SHIFT(ip), \ - UNIPERIF_I2S_FMT_ORDER_MASK(ip), 1) - -/* NUM_CH */ -#define UNIPERIF_I2S_FMT_NUM_CH_SHIFT(ip) 9 -#define UNIPERIF_I2S_FMT_NUM_CH_MASK(ip) 0x7 -#define GET_UNIPERIF_I2S_FMT_NUM_CH(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_NUM_CH_SHIFT(ip), \ - UNIPERIF_I2S_FMT_NUM_CH_MASK(ip)) -#define SET_UNIPERIF_I2S_FMT_NUM_CH(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_NUM_CH_SHIFT(ip), \ - UNIPERIF_I2S_FMT_NUM_CH_MASK(ip), value) - -/* NO_OF_SAMPLES_TO_READ */ -#define UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ_SHIFT(ip) 12 -#define UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ_MASK(ip) 0xfffff -#define GET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ_SHIFT(ip), \ - UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ_MASK(ip)) -#define SET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_I2S_FMT_OFFSET(ip), \ - UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ_SHIFT(ip), \ - UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ_MASK(ip), value) - -/* - * UNIPERIF_BIT_CONTROL reg - */ - -#define UNIPERIF_BIT_CONTROL_OFFSET(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 0x004c) -#define GET_UNIPERIF_BIT_CONTROL(ip) \ - readl_relaxed(ip->base + UNIPERIF_BIT_CONTROL_OFFSET(ip)) -#define SET_UNIPERIF_BIT_CONTROL(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_BIT_CONTROL_OFFSET(ip)) - -/* CLR_UNDERFLOW_DURATION */ -#define UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION_SHIFT(ip) 0 -#define UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION_MASK(ip) 0x1 -#define GET_UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_BIT_CONTROL_OFFSET(ip), \ - UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION_SHIFT(ip), \ - UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION_MASK(ip)) -#define SET_UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_BIT_CONTROL_OFFSET(ip), \ - UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION_SHIFT(ip), \ - UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION_MASK(ip), 1) - -/* CHL_STS_UPDATE */ -#define UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE_SHIFT(ip) 1 -#define UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE_MASK(ip) 0x1 -#define GET_UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_BIT_CONTROL_OFFSET(ip), \ - UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE_SHIFT(ip), \ - UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE_MASK(ip)) -#define SET_UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE(ip) \ - SET_UNIPERIF_BIT_REG(ip, \ - UNIPERIF_BIT_CONTROL_OFFSET(ip), \ - UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE_SHIFT(ip), \ - UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE_MASK(ip), 1) - -/* - * UNIPERIF_STATUS_1 reg - */ - -#define UNIPERIF_STATUS_1_OFFSET(ip) 0x0050 -#define GET_UNIPERIF_STATUS_1(ip) \ - readl_relaxed(ip->base + UNIPERIF_STATUS_1_OFFSET(ip)) -#define SET_UNIPERIF_STATUS_1(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_STATUS_1_OFFSET(ip)) - -/* UNDERFLOW_DURATION */ -#define UNIPERIF_STATUS_1_UNDERFLOW_DURATION_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 0) -#define UNIPERIF_STATUS_1_UNDERFLOW_DURATION_MASK(ip) 0xff -#define GET_UNIPERIF_STATUS_1_UNDERFLOW_DURATION(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_STATUS_1_OFFSET(ip), \ - UNIPERIF_STATUS_1_UNDERFLOW_DURATION_SHIFT(ip), \ - UNIPERIF_STATUS_1_UNDERFLOW_DURATION_MASK(ip)) -#define SET_UNIPERIF_STATUS_1_UNDERFLOW_DURATION(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_STATUS_1_OFFSET(ip), \ - UNIPERIF_STATUS_1_UNDERFLOW_DURATION_SHIFT(ip), \ - UNIPERIF_STATUS_1_UNDERFLOW_DURATION_MASK(ip), value) - -/* - * UNIPERIF_CHANNEL_STA_REGN reg - */ - -#define UNIPERIF_CHANNEL_STA_REGN(ip, n) (0x0060 + (4 * n)) -#define GET_UNIPERIF_CHANNEL_STA_REGN(ip) \ - readl_relaxed(ip->base + UNIPERIF_CHANNEL_STA_REGN(ip, n)) -#define SET_UNIPERIF_CHANNEL_STA_REGN(ip, n, value) \ - writel_relaxed(value, ip->base + \ - UNIPERIF_CHANNEL_STA_REGN(ip, n)) - -/* - * UNIPERIF_USER_VALIDITY reg - */ - -#define UNIPERIF_USER_VALIDITY_OFFSET(ip) 0x0090 -#define GET_UNIPERIF_USER_VALIDITY(ip) \ - readl_relaxed(ip->base + UNIPERIF_USER_VALIDITY_OFFSET(ip)) -#define SET_UNIPERIF_USER_VALIDITY(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_USER_VALIDITY_OFFSET(ip)) - -/* VALIDITY_LEFT_AND_RIGHT */ -#define UNIPERIF_USER_VALIDITY_VALIDITY_LR_SHIFT(ip) 0 -#define UNIPERIF_USER_VALIDITY_VALIDITY_LR_MASK(ip) 0x3 -#define GET_UNIPERIF_USER_VALIDITY_VALIDITY_LR(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_USER_VALIDITY_OFFSET(ip), \ - UNIPERIF_USER_VALIDITY_VALIDITY_LR_SHIFT(ip), \ - UNIPERIF_USER_VALIDITY_VALIDITY_LR_MASK(ip)) -#define SET_UNIPERIF_USER_VALIDITY_VALIDITY_LR(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_USER_VALIDITY_OFFSET(ip), \ - UNIPERIF_USER_VALIDITY_VALIDITY_LR_SHIFT(ip), \ - UNIPERIF_USER_VALIDITY_VALIDITY_LR_MASK(ip), \ - value ? 0x3 : 0) - -/* - * UNIPERIF_DBG_STANDBY_LEFT_SP reg - */ -#define UNIPERIF_DBG_STANDBY_LEFT_SP_OFFSET(ip) 0x0150 -#define UNIPERIF_DBG_STANDBY_LEFT_SP_SHIFT(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? -1 : 0) -#define UNIPERIF_DBG_STANDBY_LEFT_SP_MASK(ip) \ - ((ip)->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 ? 0 : 0xFFFFFF) -#define GET_UNIPERIF_DBG_STANDBY_LEFT_SP(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_DBG_STANDBY_LEFT_SP_OFFSET(ip), \ - UNIPERIF_DBG_STANDBY_LEFT_SP_SHIFT(ip), \ - UNIPERIF_DBG_STANDBY_LEFT_SP_MASK(ip)) -#define SET_UNIPERIF_DBG_STANDBY_LEFT_SP(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_DBG_STANDBY_LEFT_SP_OFFSET(ip), \ - UNIPERIF_DBG_STANDBY_LEFT_SP_SHIFT(ip), \ - UNIPERIF_DBG_STANDBY_LEFT_SP_MASK(ip), value) - -/* - * UNIPERIF_TDM_ENABLE - */ -#define UNIPERIF_TDM_ENABLE_OFFSET(ip) 0x0118 -#define GET_UNIPERIF_TDM_ENABLE(ip) \ - readl_relaxed(ip->base + UNIPERIF_TDM_ENABLE_OFFSET(ip)) -#define SET_UNIPERIF_TDM_ENABLE(ip, value) \ - writel_relaxed(value, ip->base + UNIPERIF_TDM_ENABLE_OFFSET(ip)) - -/* TDM_ENABLE */ -#define UNIPERIF_TDM_ENABLE_EN_TDM_SHIFT(ip) 0x0 -#define UNIPERIF_TDM_ENABLE_EN_TDM_MASK(ip) 0x1 -#define GET_UNIPERIF_TDM_ENABLE_EN_TDM(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_ENABLE_OFFSET(ip), \ - UNIPERIF_TDM_ENABLE_EN_TDM_SHIFT(ip), \ - UNIPERIF_TDM_ENABLE_EN_TDM_MASK(ip)) -#define SET_UNIPERIF_TDM_ENABLE_TDM_ENABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_ENABLE_OFFSET(ip), \ - UNIPERIF_TDM_ENABLE_EN_TDM_SHIFT(ip), \ - UNIPERIF_TDM_ENABLE_EN_TDM_MASK(ip), 1) -#define SET_UNIPERIF_TDM_ENABLE_TDM_DISABLE(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_ENABLE_OFFSET(ip), \ - UNIPERIF_TDM_ENABLE_EN_TDM_SHIFT(ip), \ - UNIPERIF_TDM_ENABLE_EN_TDM_MASK(ip), 0) - -/* - * UNIPERIF_TDM_FS_REF_FREQ - */ -#define UNIPERIF_TDM_FS_REF_FREQ_OFFSET(ip) 0x011c -#define GET_UNIPERIF_TDM_FS_REF_FREQ(ip) \ - readl_relaxed(ip->base + UNIPERIF_TDM_FS_REF_FREQ_OFFSET(ip)) -#define SET_UNIPERIF_TDM_FS_REF_FREQ(ip, value) \ - writel_relaxed(value, ip->base + \ - UNIPERIF_TDM_FS_REF_FREQ_OFFSET(ip)) - -/* REF_FREQ */ -#define UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_SHIFT(ip) 0x0 -#define VALUE_UNIPERIF_TDM_FS_REF_FREQ_8KHZ(ip) 0 -#define VALUE_UNIPERIF_TDM_FS_REF_FREQ_16KHZ(ip) 1 -#define VALUE_UNIPERIF_TDM_FS_REF_FREQ_32KHZ(ip) 2 -#define VALUE_UNIPERIF_TDM_FS_REF_FREQ_48KHZ(ip) 3 -#define UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_MASK(ip) 0x3 -#define GET_UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_FS_REF_FREQ_OFFSET(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_SHIFT(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_MASK(ip)) -#define SET_UNIPERIF_TDM_FS_REF_FREQ_8KHZ(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_FS_REF_FREQ_OFFSET(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_SHIFT(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_MASK(ip), \ - VALUE_UNIPERIF_TDM_FS_REF_FREQ_8KHZ(ip)) -#define SET_UNIPERIF_TDM_FS_REF_FREQ_16KHZ(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_FS_REF_FREQ_OFFSET(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_SHIFT(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_MASK(ip), \ - VALUE_UNIPERIF_TDM_FS_REF_FREQ_16KHZ(ip)) -#define SET_UNIPERIF_TDM_FS_REF_FREQ_32KHZ(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_FS_REF_FREQ_OFFSET(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_SHIFT(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_MASK(ip), \ - VALUE_UNIPERIF_TDM_FS_REF_FREQ_32KHZ(ip)) -#define SET_UNIPERIF_TDM_FS_REF_FREQ_48KHZ(ip) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_FS_REF_FREQ_OFFSET(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_SHIFT(ip), \ - UNIPERIF_TDM_FS_REF_FREQ_REF_FREQ_MASK(ip), \ - VALUE_UNIPERIF_TDM_FS_REF_FREQ_48KHZ(ip)) - -/* - * UNIPERIF_TDM_FS_REF_DIV - */ -#define UNIPERIF_TDM_FS_REF_DIV_OFFSET(ip) 0x0120 -#define GET_UNIPERIF_TDM_FS_REF_DIV(ip) \ - readl_relaxed(ip->base + UNIPERIF_TDM_FS_REF_DIV_OFFSET(ip)) -#define SET_UNIPERIF_TDM_FS_REF_DIV(ip, value) \ - writel_relaxed(value, ip->base + \ - UNIPERIF_TDM_FS_REF_DIV_OFFSET(ip)) - -/* NUM_TIMESLOT */ -#define UNIPERIF_TDM_FS_REF_DIV_NUM_TIMESLOT_SHIFT(ip) 0x0 -#define UNIPERIF_TDM_FS_REF_DIV_NUM_TIMESLOT_MASK(ip) 0xff -#define GET_UNIPERIF_TDM_FS_REF_DIV_NUM_TIMESLOT(ip) \ - GET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_FS_REF_DIV_OFFSET(ip), \ - UNIPERIF_TDM_FS_REF_DIV_NUM_TIMESLOT_SHIFT(ip), \ - UNIPERIF_TDM_FS_REF_DIV_NUM_TIMESLOT_MASK(ip)) -#define SET_UNIPERIF_TDM_FS_REF_DIV_NUM_TIMESLOT(ip, value) \ - SET_UNIPERIF_REG(ip, \ - UNIPERIF_TDM_FS_REF_DIV_OFFSET(ip), \ - UNIPERIF_TDM_FS_REF_DIV_NUM_TIMESLOT_SHIFT(ip), \ - UNIPERIF_TDM_FS_REF_DIV_NUM_TIMESLOT_MASK(ip), value) - -/* - * UNIPERIF_TDM_WORD_POS_X_Y - * 32 bits of UNIPERIF_TDM_WORD_POS_X_Y register shall be set in 1 shot - */ -#define UNIPERIF_TDM_WORD_POS_1_2_OFFSET(ip) 0x013c -#define UNIPERIF_TDM_WORD_POS_3_4_OFFSET(ip) 0x0140 -#define UNIPERIF_TDM_WORD_POS_5_6_OFFSET(ip) 0x0144 -#define UNIPERIF_TDM_WORD_POS_7_8_OFFSET(ip) 0x0148 -#define GET_UNIPERIF_TDM_WORD_POS(ip, words) \ - readl_relaxed(ip->base + UNIPERIF_TDM_WORD_POS_##words##_OFFSET(ip)) -#define SET_UNIPERIF_TDM_WORD_POS(ip, words, value) \ - writel_relaxed(value, ip->base + \ - UNIPERIF_TDM_WORD_POS_##words##_OFFSET(ip)) -/* - * uniperipheral IP capabilities - */ - -#define UNIPERIF_FIFO_SIZE 70 /* FIFO is 70 cells deep */ -#define UNIPERIF_FIFO_FRAMES 4 /* FDMA trigger limit in frames */ - -#define UNIPERIF_TYPE_IS_HDMI(p) \ - ((p)->type == SND_ST_UNIPERIF_TYPE_HDMI) -#define UNIPERIF_TYPE_IS_PCM(p) \ - ((p)->type == SND_ST_UNIPERIF_TYPE_PCM) -#define UNIPERIF_TYPE_IS_SPDIF(p) \ - ((p)->type == SND_ST_UNIPERIF_TYPE_SPDIF) -#define UNIPERIF_TYPE_IS_IEC958(p) \ - (UNIPERIF_TYPE_IS_HDMI(p) || \ - UNIPERIF_TYPE_IS_SPDIF(p)) -#define UNIPERIF_TYPE_IS_TDM(p) \ - ((p)->type == SND_ST_UNIPERIF_TYPE_TDM) - -/* - * Uniperipheral IP revisions - */ -enum uniperif_version { - SND_ST_UNIPERIF_VERSION_UNKNOWN, - /* SASG1 (Orly), Newman */ - SND_ST_UNIPERIF_VERSION_C6AUD0_UNI_1_0, - /* SASC1, SASG2 (Orly2) */ - SND_ST_UNIPERIF_VERSION_UNI_PLR_1_0, - /* SASC1, SASG2 (Orly2), TELSS, Cannes */ - SND_ST_UNIPERIF_VERSION_UNI_RDR_1_0, - /* TELSS (SASC1) */ - SND_ST_UNIPERIF_VERSION_TDM_PLR_1_0, - /* Cannes/Monaco */ - SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 -}; - -enum uniperif_type { - SND_ST_UNIPERIF_TYPE_NONE = 0x00, - SND_ST_UNIPERIF_TYPE_HDMI = 0x01, - SND_ST_UNIPERIF_TYPE_PCM = 0x02, - SND_ST_UNIPERIF_TYPE_SPDIF = 0x04, - SND_ST_UNIPERIF_TYPE_TDM = 0x08 -}; - -enum uniperif_state { - UNIPERIF_STATE_STOPPED, - UNIPERIF_STATE_STARTED, - UNIPERIF_STATE_STANDBY, - UNIPERIF_STATE_UNDERFLOW, - UNIPERIF_STATE_OVERFLOW = UNIPERIF_STATE_UNDERFLOW, - UNIPERIF_STATE_XRUN -}; - -enum uniperif_iec958_encoding_mode { - UNIPERIF_IEC958_ENCODING_MODE_PCM, - UNIPERIF_IEC958_ENCODING_MODE_ENCODED -}; - -enum uniperif_word_pos { - WORD_1_2, - WORD_3_4, - WORD_5_6, - WORD_7_8, - WORD_MAX -}; - -struct uniperif_iec958_settings { - enum uniperif_iec958_encoding_mode encoding_mode; - struct snd_aes_iec958 iec958; -}; - -struct dai_tdm_slot { - unsigned int mask; - int slots; - int slot_width; - unsigned int avail_slots; -}; - -struct uniperif { - /* System information */ - enum uniperif_type type; - int underflow_enabled; /* Underflow recovery mode */ - struct device *dev; - int id; /* instance value of the uniperipheral IP */ - int ver; /* IP version, used by register access macros */ - struct regmap_field *clk_sel; - struct regmap_field *valid_sel; - spinlock_t irq_lock; /* use to prevent race condition with IRQ */ - - /* capabilities */ - const struct snd_pcm_hardware *hw; - - /* Resources */ - struct resource *mem_region; - void __iomem *base; - unsigned long fifo_phys_address; - int irq; - - /* Clocks */ - struct clk *clk; - int mclk; - int clk_adj; - - /* Runtime data */ - enum uniperif_state state; - - struct snd_pcm_substream *substream; - - /* Specific to IEC958 player */ - struct uniperif_iec958_settings stream_settings; - struct mutex ctrl_lock; /* For resource updated by stream and controls*/ - - /*alsa ctrl*/ - struct snd_kcontrol_new *snd_ctrls; - int num_ctrls; - - /* dai properties */ - unsigned int daifmt; - struct dai_tdm_slot tdm_slot; - - /* DAI callbacks */ - const struct snd_soc_dai_ops *dai_ops; -}; - -struct sti_uniperiph_dai { - int stream; - struct uniperif *uni; - struct snd_dmaengine_dai_dma_data dma_data; -}; - -struct sti_uniperiph_data { - struct platform_device *pdev; - struct snd_soc_dai_driver *dai; - struct sti_uniperiph_dai dai_data; -}; - -static __maybe_unused const struct snd_pcm_hardware uni_tdm_hw = { - .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID, - - .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE, - - .rates = SNDRV_PCM_RATE_CONTINUOUS, - .rate_min = 8000, - .rate_max = 48000, - - .channels_min = 1, - .channels_max = 32, - - .periods_min = 2, - .periods_max = 10, - - .period_bytes_min = 128, - .period_bytes_max = 64 * PAGE_SIZE, - .buffer_bytes_max = 256 * PAGE_SIZE -}; - -/* uniperiph player*/ -int uni_player_init(struct platform_device *pdev, - struct uniperif *player); -int uni_player_resume(struct uniperif *player); - -/* uniperiph reader */ -int uni_reader_init(struct platform_device *pdev, - struct uniperif *reader); - -/* common */ -int sti_uniperiph_dai_set_fmt(struct snd_soc_dai *dai, - unsigned int fmt); - -int sti_uniperiph_dai_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai); - -static inline int sti_uniperiph_get_user_frame_size( - struct snd_pcm_runtime *runtime) -{ - return (runtime->channels * snd_pcm_format_width(runtime->format) / 8); -} - -static inline int sti_uniperiph_get_unip_tdm_frame_size(struct uniperif *uni) -{ - return (uni->tdm_slot.slots * uni->tdm_slot.slot_width / 8); -} - -int sti_uniperiph_reset(struct uniperif *uni); - -int sti_uniperiph_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, - unsigned int rx_mask, int slots, - int slot_width); - -int sti_uniperiph_get_tdm_word_pos(struct uniperif *uni, - unsigned int *word_pos); - -int sti_uniperiph_fix_tdm_chan(struct snd_pcm_hw_params *params, - struct snd_pcm_hw_rule *rule); - -int sti_uniperiph_fix_tdm_format(struct snd_pcm_hw_params *params, - struct snd_pcm_hw_rule *rule); - -#endif diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c deleted file mode 100644 index 2ed92c990b97..000000000000 --- a/sound/soc/sti/uniperif_player.c +++ /dev/null @@ -1,1148 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) STMicroelectronics SA 2015 - * Authors: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> - * for STMicroelectronics. - */ - -#include <linux/clk.h> -#include <linux/mfd/syscon.h> - -#include <sound/asoundef.h> -#include <sound/soc.h> - -#include "uniperif.h" - -/* - * Some hardware-related definitions - */ - -/* sys config registers definitions */ -#define SYS_CFG_AUDIO_GLUE 0xA4 - -/* - * Driver specific types. - */ - -#define UNIPERIF_PLAYER_CLK_ADJ_MIN -999999 -#define UNIPERIF_PLAYER_CLK_ADJ_MAX 1000000 -#define UNIPERIF_PLAYER_I2S_OUT 1 /* player id connected to I2S/TDM TX bus */ - -/* - * Note: snd_pcm_hardware is linked to DMA controller but is declared here to - * integrate DAI_CPU capability in term of rate and supported channels - */ -static const struct snd_pcm_hardware uni_player_pcm_hw = { - .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID, - .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE, - - .rates = SNDRV_PCM_RATE_CONTINUOUS, - .rate_min = 8000, - .rate_max = 192000, - - .channels_min = 2, - .channels_max = 8, - - .periods_min = 2, - .periods_max = 48, - - .period_bytes_min = 128, - .period_bytes_max = 64 * PAGE_SIZE, - .buffer_bytes_max = 256 * PAGE_SIZE -}; - -/* - * uni_player_irq_handler - * In case of error audio stream is stopped; stop action is protected via PCM - * stream lock to avoid race condition with trigger callback. - */ -static irqreturn_t uni_player_irq_handler(int irq, void *dev_id) -{ - irqreturn_t ret = IRQ_NONE; - struct uniperif *player = dev_id; - unsigned int status; - unsigned int tmp; - - spin_lock(&player->irq_lock); - if (!player->substream) - goto irq_spin_unlock; - - snd_pcm_stream_lock(player->substream); - if (player->state == UNIPERIF_STATE_STOPPED) - goto stream_unlock; - - /* Get interrupt status & clear them immediately */ - status = GET_UNIPERIF_ITS(player); - SET_UNIPERIF_ITS_BCLR(player, status); - - /* Check for fifo error (underrun) */ - if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(player))) { - dev_err(player->dev, "FIFO underflow error detected\n"); - - /* Interrupt is just for information when underflow recovery */ - if (player->underflow_enabled) { - /* Update state to underflow */ - player->state = UNIPERIF_STATE_UNDERFLOW; - - } else { - /* Disable interrupt so doesn't continually fire */ - SET_UNIPERIF_ITM_BCLR_FIFO_ERROR(player); - - /* Stop the player */ - snd_pcm_stop_xrun(player->substream); - } - - ret = IRQ_HANDLED; - } - - /* Check for dma error (overrun) */ - if (unlikely(status & UNIPERIF_ITS_DMA_ERROR_MASK(player))) { - dev_err(player->dev, "DMA error detected\n"); - - /* Disable interrupt so doesn't continually fire */ - SET_UNIPERIF_ITM_BCLR_DMA_ERROR(player); - - /* Stop the player */ - snd_pcm_stop_xrun(player->substream); - - ret = IRQ_HANDLED; - } - - /* Check for underflow recovery done */ - if (unlikely(status & UNIPERIF_ITM_UNDERFLOW_REC_DONE_MASK(player))) { - if (!player->underflow_enabled) { - dev_err(player->dev, - "unexpected Underflow recovering\n"); - ret = -EPERM; - goto stream_unlock; - } - /* Read the underflow recovery duration */ - tmp = GET_UNIPERIF_STATUS_1_UNDERFLOW_DURATION(player); - dev_dbg(player->dev, "Underflow recovered (%d LR clocks max)\n", - tmp); - - /* Clear the underflow recovery duration */ - SET_UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION(player); - - /* Update state to started */ - player->state = UNIPERIF_STATE_STARTED; - - ret = IRQ_HANDLED; - } - - /* Check if underflow recovery failed */ - if (unlikely(status & - UNIPERIF_ITM_UNDERFLOW_REC_FAILED_MASK(player))) { - dev_err(player->dev, "Underflow recovery failed\n"); - - /* Stop the player */ - snd_pcm_stop_xrun(player->substream); - - ret = IRQ_HANDLED; - } - -stream_unlock: - snd_pcm_stream_unlock(player->substream); -irq_spin_unlock: - spin_unlock(&player->irq_lock); - - return ret; -} - -static int uni_player_clk_set_rate(struct uniperif *player, unsigned long rate) -{ - int rate_adjusted, rate_achieved, delta, ret; - int adjustment = player->clk_adj; - - /* - * a - * F = f + --------- * f = f + d - * 1000000 - * - * a - * d = --------- * f - * 1000000 - * - * where: - * f - nominal rate - * a - adjustment in ppm (parts per milion) - * F - rate to be set in synthesizer - * d - delta (difference) between f and F - */ - if (adjustment < 0) { - /* div64_64 operates on unsigned values... */ - delta = -1; - adjustment = -adjustment; - } else { - delta = 1; - } - /* 500000 ppm is 0.5, which is used to round up values */ - delta *= (int)div64_u64((uint64_t)rate * - (uint64_t)adjustment + 500000, 1000000); - rate_adjusted = rate + delta; - - /* Adjusted rate should never be == 0 */ - if (!rate_adjusted) - return -EINVAL; - - ret = clk_set_rate(player->clk, rate_adjusted); - if (ret < 0) - return ret; - - rate_achieved = clk_get_rate(player->clk); - if (!rate_achieved) - /* If value is 0 means that clock or parent not valid */ - return -EINVAL; - - /* - * Using ALSA's adjustment control, we can modify the rate to be up - * to twice as much as requested, but no more - */ - delta = rate_achieved - rate; - if (delta < 0) { - /* div64_64 operates on unsigned values... */ - delta = -delta; - adjustment = -1; - } else { - adjustment = 1; - } - /* Frequency/2 is added to round up result */ - adjustment *= (int)div64_u64((uint64_t)delta * 1000000 + rate / 2, - rate); - player->clk_adj = adjustment; - return 0; -} - -static void uni_player_set_channel_status(struct uniperif *player, - struct snd_pcm_runtime *runtime) -{ - int n; - unsigned int status; - - /* - * Some AVRs and TVs require the channel status to contain a correct - * sampling frequency. If no sample rate is already specified, then - * set one. - */ - if (runtime) { - switch (runtime->rate) { - case 22050: - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_22050; - break; - case 44100: - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_44100; - break; - case 88200: - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_88200; - break; - case 176400: - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_176400; - break; - case 24000: - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_24000; - break; - case 48000: - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_48000; - break; - case 96000: - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_96000; - break; - case 192000: - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_192000; - break; - case 32000: - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_32000; - break; - default: - /* Mark as sampling frequency not indicated */ - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_NOTID; - break; - } - } - - /* Audio mode: - * Use audio mode status to select PCM or encoded mode - */ - if (player->stream_settings.iec958.status[0] & IEC958_AES0_NONAUDIO) - player->stream_settings.encoding_mode = - UNIPERIF_IEC958_ENCODING_MODE_ENCODED; - else - player->stream_settings.encoding_mode = - UNIPERIF_IEC958_ENCODING_MODE_PCM; - - if (player->stream_settings.encoding_mode == - UNIPERIF_IEC958_ENCODING_MODE_PCM) - /* Clear user validity bits */ - SET_UNIPERIF_USER_VALIDITY_VALIDITY_LR(player, 0); - else - /* Set user validity bits */ - SET_UNIPERIF_USER_VALIDITY_VALIDITY_LR(player, 1); - - /* Program the new channel status */ - for (n = 0; n < 6; ++n) { - status = - player->stream_settings.iec958.status[0 + (n * 4)] & 0xf; - status |= - player->stream_settings.iec958.status[1 + (n * 4)] << 8; - status |= - player->stream_settings.iec958.status[2 + (n * 4)] << 16; - status |= - player->stream_settings.iec958.status[3 + (n * 4)] << 24; - SET_UNIPERIF_CHANNEL_STA_REGN(player, n, status); - } - - /* Update the channel status */ - if (player->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) - SET_UNIPERIF_CONFIG_CHL_STS_UPDATE(player); - else - SET_UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE(player); -} - -static int uni_player_prepare_iec958(struct uniperif *player, - struct snd_pcm_runtime *runtime) -{ - int clk_div; - - clk_div = player->mclk / runtime->rate; - - /* Oversampling must be multiple of 128 as iec958 frame is 32-bits */ - if ((clk_div % 128) || (clk_div <= 0)) { - dev_err(player->dev, "%s: invalid clk_div %d\n", - __func__, clk_div); - return -EINVAL; - } - - switch (runtime->format) { - case SNDRV_PCM_FORMAT_S16_LE: - /* 16/16 memory format */ - SET_UNIPERIF_CONFIG_MEM_FMT_16_16(player); - /* 16-bits per sub-frame */ - SET_UNIPERIF_I2S_FMT_NBIT_32(player); - /* Set 16-bit sample precision */ - SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(player); - break; - case SNDRV_PCM_FORMAT_S32_LE: - /* 16/0 memory format */ - SET_UNIPERIF_CONFIG_MEM_FMT_16_0(player); - /* 32-bits per sub-frame */ - SET_UNIPERIF_I2S_FMT_NBIT_32(player); - /* Set 24-bit sample precision */ - SET_UNIPERIF_I2S_FMT_DATA_SIZE_24(player); - break; - default: - dev_err(player->dev, "format not supported\n"); - return -EINVAL; - } - - /* Set parity to be calculated by the hardware */ - SET_UNIPERIF_CONFIG_PARITY_CNTR_BY_HW(player); - - /* Set channel status bits to be inserted by the hardware */ - SET_UNIPERIF_CONFIG_CHANNEL_STA_CNTR_BY_HW(player); - - /* Set user data bits to be inserted by the hardware */ - SET_UNIPERIF_CONFIG_USER_DAT_CNTR_BY_HW(player); - - /* Set validity bits to be inserted by the hardware */ - SET_UNIPERIF_CONFIG_VALIDITY_DAT_CNTR_BY_HW(player); - - /* Set full software control to disabled */ - SET_UNIPERIF_CONFIG_SPDIF_SW_CTRL_DISABLE(player); - - SET_UNIPERIF_CTRL_ZERO_STUFF_HW(player); - - mutex_lock(&player->ctrl_lock); - /* Update the channel status */ - uni_player_set_channel_status(player, runtime); - mutex_unlock(&player->ctrl_lock); - - /* Clear the user validity user bits */ - SET_UNIPERIF_USER_VALIDITY_VALIDITY_LR(player, 0); - - /* Disable one-bit audio mode */ - SET_UNIPERIF_CONFIG_ONE_BIT_AUD_DISABLE(player); - - /* Enable consecutive frames repetition of Z preamble (not for HBRA) */ - SET_UNIPERIF_CONFIG_REPEAT_CHL_STS_ENABLE(player); - - /* Change to SUF0_SUBF1 and left/right channels swap! */ - SET_UNIPERIF_CONFIG_SUBFRAME_SEL_SUBF1_SUBF0(player); - - /* Set data output as MSB first */ - SET_UNIPERIF_I2S_FMT_ORDER_MSB(player); - - if (player->stream_settings.encoding_mode == - UNIPERIF_IEC958_ENCODING_MODE_ENCODED) - SET_UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_ON(player); - else - SET_UNIPERIF_CTRL_EXIT_STBY_ON_EOBLOCK_OFF(player); - - SET_UNIPERIF_I2S_FMT_NUM_CH(player, runtime->channels / 2); - - /* Set rounding to off */ - SET_UNIPERIF_CTRL_ROUNDING_OFF(player); - - /* Set clock divisor */ - SET_UNIPERIF_CTRL_DIVIDER(player, clk_div / 128); - - /* Set the spdif latency to not wait before starting player */ - SET_UNIPERIF_CTRL_SPDIF_LAT_OFF(player); - - /* - * Ensure iec958 formatting is off. It will be enabled in function - * uni_player_start() at the same time as the operation - * mode is set to work around a silicon issue. - */ - if (player->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) - SET_UNIPERIF_CTRL_SPDIF_FMT_OFF(player); - else - SET_UNIPERIF_CTRL_SPDIF_FMT_ON(player); - - return 0; -} - -static int uni_player_prepare_pcm(struct uniperif *player, - struct snd_pcm_runtime *runtime) -{ - int output_frame_size, slot_width, clk_div; - - /* Force slot width to 32 in I2S mode (HW constraint) */ - if ((player->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == - SND_SOC_DAIFMT_I2S) - slot_width = 32; - else - slot_width = snd_pcm_format_width(runtime->format); - - output_frame_size = slot_width * runtime->channels; - - clk_div = player->mclk / runtime->rate; - /* - * For 32 bits subframe clk_div must be a multiple of 128, - * for 16 bits must be a multiple of 64 - */ - if ((slot_width == 32) && (clk_div % 128)) { - dev_err(player->dev, "%s: invalid clk_div\n", __func__); - return -EINVAL; - } - - if ((slot_width == 16) && (clk_div % 64)) { - dev_err(player->dev, "%s: invalid clk_div\n", __func__); - return -EINVAL; - } - - /* - * Number of bits per subframe (which is one channel sample) - * on output - Transfer 16 or 32 bits from FIFO - */ - switch (slot_width) { - case 32: - SET_UNIPERIF_I2S_FMT_NBIT_32(player); - SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(player); - break; - case 16: - SET_UNIPERIF_I2S_FMT_NBIT_16(player); - SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(player); - break; - default: - dev_err(player->dev, "subframe format not supported\n"); - return -EINVAL; - } - - /* Configure data memory format */ - switch (runtime->format) { - case SNDRV_PCM_FORMAT_S16_LE: - /* One data word contains two samples */ - SET_UNIPERIF_CONFIG_MEM_FMT_16_16(player); - break; - - case SNDRV_PCM_FORMAT_S32_LE: - /* - * Actually "16 bits/0 bits" means "32/28/24/20/18/16 bits - * on the left than zeros (if less than 32 bytes)"... ;-) - */ - SET_UNIPERIF_CONFIG_MEM_FMT_16_0(player); - break; - - default: - dev_err(player->dev, "format not supported\n"); - return -EINVAL; - } - - /* Set rounding to off */ - SET_UNIPERIF_CTRL_ROUNDING_OFF(player); - - /* Set clock divisor */ - SET_UNIPERIF_CTRL_DIVIDER(player, clk_div / (2 * output_frame_size)); - - /* Number of channelsmust be even*/ - if ((runtime->channels % 2) || (runtime->channels < 2) || - (runtime->channels > 10)) { - dev_err(player->dev, "%s: invalid nb of channels\n", __func__); - return -EINVAL; - } - - SET_UNIPERIF_I2S_FMT_NUM_CH(player, runtime->channels / 2); - - /* Set 1-bit audio format to disabled */ - SET_UNIPERIF_CONFIG_ONE_BIT_AUD_DISABLE(player); - - SET_UNIPERIF_I2S_FMT_ORDER_MSB(player); - - /* No iec958 formatting as outputting to DAC */ - SET_UNIPERIF_CTRL_SPDIF_FMT_OFF(player); - - return 0; -} - -static int uni_player_prepare_tdm(struct uniperif *player, - struct snd_pcm_runtime *runtime) -{ - int tdm_frame_size; /* unip tdm frame size in bytes */ - int user_frame_size; /* user tdm frame size in bytes */ - /* default unip TDM_WORD_POS_X_Y */ - unsigned int word_pos[4] = { - 0x04060002, 0x0C0E080A, 0x14161012, 0x1C1E181A}; - int freq, ret; - - tdm_frame_size = - sti_uniperiph_get_unip_tdm_frame_size(player); - user_frame_size = - sti_uniperiph_get_user_frame_size(runtime); - - /* fix 16/0 format */ - SET_UNIPERIF_CONFIG_MEM_FMT_16_0(player); - SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(player); - - /* number of words inserted on the TDM line */ - SET_UNIPERIF_I2S_FMT_NUM_CH(player, user_frame_size / 4 / 2); - - SET_UNIPERIF_I2S_FMT_ORDER_MSB(player); - SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(player); - - /* Enable the tdm functionality */ - SET_UNIPERIF_TDM_ENABLE_TDM_ENABLE(player); - - /* number of 8 bits timeslots avail in unip tdm frame */ - SET_UNIPERIF_TDM_FS_REF_DIV_NUM_TIMESLOT(player, tdm_frame_size); - - /* set the timeslot allocation for words in FIFO */ - sti_uniperiph_get_tdm_word_pos(player, word_pos); - SET_UNIPERIF_TDM_WORD_POS(player, 1_2, word_pos[WORD_1_2]); - SET_UNIPERIF_TDM_WORD_POS(player, 3_4, word_pos[WORD_3_4]); - SET_UNIPERIF_TDM_WORD_POS(player, 5_6, word_pos[WORD_5_6]); - SET_UNIPERIF_TDM_WORD_POS(player, 7_8, word_pos[WORD_7_8]); - - /* set unip clk rate (not done vai set_sysclk ops) */ - freq = runtime->rate * tdm_frame_size * 8; - mutex_lock(&player->ctrl_lock); - ret = uni_player_clk_set_rate(player, freq); - if (!ret) - player->mclk = freq; - mutex_unlock(&player->ctrl_lock); - - return 0; -} - -/* - * ALSA uniperipheral iec958 controls - */ -static int uni_player_ctl_iec958_info(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) -{ - uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; - uinfo->count = 1; - - return 0; -} - -static int uni_player_ctl_iec958_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol); - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *player = priv->dai_data.uni; - struct snd_aes_iec958 *iec958 = &player->stream_settings.iec958; - - mutex_lock(&player->ctrl_lock); - ucontrol->value.iec958.status[0] = iec958->status[0]; - ucontrol->value.iec958.status[1] = iec958->status[1]; - ucontrol->value.iec958.status[2] = iec958->status[2]; - ucontrol->value.iec958.status[3] = iec958->status[3]; - mutex_unlock(&player->ctrl_lock); - return 0; -} - -static int uni_player_ctl_iec958_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol); - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *player = priv->dai_data.uni; - struct snd_aes_iec958 *iec958 = &player->stream_settings.iec958; - unsigned long flags; - - mutex_lock(&player->ctrl_lock); - iec958->status[0] = ucontrol->value.iec958.status[0]; - iec958->status[1] = ucontrol->value.iec958.status[1]; - iec958->status[2] = ucontrol->value.iec958.status[2]; - iec958->status[3] = ucontrol->value.iec958.status[3]; - - spin_lock_irqsave(&player->irq_lock, flags); - if (player->substream && player->substream->runtime) - uni_player_set_channel_status(player, - player->substream->runtime); - else - uni_player_set_channel_status(player, NULL); - - spin_unlock_irqrestore(&player->irq_lock, flags); - mutex_unlock(&player->ctrl_lock); - - return 0; -} - -static struct snd_kcontrol_new uni_player_iec958_ctl = { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, - .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), - .info = uni_player_ctl_iec958_info, - .get = uni_player_ctl_iec958_get, - .put = uni_player_ctl_iec958_put, -}; - -/* - * uniperif rate adjustement control - */ -static int snd_sti_clk_adjustment_info(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) -{ - uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->count = 1; - uinfo->value.integer.min = UNIPERIF_PLAYER_CLK_ADJ_MIN; - uinfo->value.integer.max = UNIPERIF_PLAYER_CLK_ADJ_MAX; - uinfo->value.integer.step = 1; - - return 0; -} - -static int snd_sti_clk_adjustment_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol); - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *player = priv->dai_data.uni; - - mutex_lock(&player->ctrl_lock); - ucontrol->value.integer.value[0] = player->clk_adj; - mutex_unlock(&player->ctrl_lock); - - return 0; -} - -static int snd_sti_clk_adjustment_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol); - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *player = priv->dai_data.uni; - int ret = 0; - - if ((ucontrol->value.integer.value[0] < UNIPERIF_PLAYER_CLK_ADJ_MIN) || - (ucontrol->value.integer.value[0] > UNIPERIF_PLAYER_CLK_ADJ_MAX)) - return -EINVAL; - - mutex_lock(&player->ctrl_lock); - player->clk_adj = ucontrol->value.integer.value[0]; - - if (player->mclk) - ret = uni_player_clk_set_rate(player, player->mclk); - mutex_unlock(&player->ctrl_lock); - - return ret; -} - -static struct snd_kcontrol_new uni_player_clk_adj_ctl = { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, - .name = "PCM Playback Oversampling Freq. Adjustment", - .info = snd_sti_clk_adjustment_info, - .get = snd_sti_clk_adjustment_get, - .put = snd_sti_clk_adjustment_put, -}; - -static struct snd_kcontrol_new *snd_sti_pcm_ctl[] = { - &uni_player_clk_adj_ctl, -}; - -static struct snd_kcontrol_new *snd_sti_iec_ctl[] = { - &uni_player_iec958_ctl, - &uni_player_clk_adj_ctl, -}; - -static int uni_player_startup(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *player = priv->dai_data.uni; - unsigned long flags; - int ret; - - spin_lock_irqsave(&player->irq_lock, flags); - player->substream = substream; - spin_unlock_irqrestore(&player->irq_lock, flags); - - player->clk_adj = 0; - - if (!UNIPERIF_TYPE_IS_TDM(player)) - return 0; - - /* refine hw constraint in tdm mode */ - ret = snd_pcm_hw_rule_add(substream->runtime, 0, - SNDRV_PCM_HW_PARAM_CHANNELS, - sti_uniperiph_fix_tdm_chan, - player, SNDRV_PCM_HW_PARAM_CHANNELS, - -1); - if (ret < 0) - return ret; - - return snd_pcm_hw_rule_add(substream->runtime, 0, - SNDRV_PCM_HW_PARAM_FORMAT, - sti_uniperiph_fix_tdm_format, - player, SNDRV_PCM_HW_PARAM_FORMAT, - -1); -} - -static int uni_player_set_sysclk(struct snd_soc_dai *dai, int clk_id, - unsigned int freq, int dir) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *player = priv->dai_data.uni; - int ret; - - if (UNIPERIF_TYPE_IS_TDM(player) || (dir == SND_SOC_CLOCK_IN)) - return 0; - - if (clk_id != 0) - return -EINVAL; - - mutex_lock(&player->ctrl_lock); - ret = uni_player_clk_set_rate(player, freq); - if (!ret) - player->mclk = freq; - mutex_unlock(&player->ctrl_lock); - - return ret; -} - -static int uni_player_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *player = priv->dai_data.uni; - struct snd_pcm_runtime *runtime = substream->runtime; - int transfer_size, trigger_limit; - int ret; - - /* The player should be stopped */ - if (player->state != UNIPERIF_STATE_STOPPED) { - dev_err(player->dev, "%s: invalid player state %d\n", __func__, - player->state); - return -EINVAL; - } - - /* Calculate transfer size (in fifo cells and bytes) for frame count */ - if (player->type == SND_ST_UNIPERIF_TYPE_TDM) { - /* transfer size = user frame size (in 32 bits FIFO cell) */ - transfer_size = - sti_uniperiph_get_user_frame_size(runtime) / 4; - } else { - transfer_size = runtime->channels * UNIPERIF_FIFO_FRAMES; - } - - /* Calculate number of empty cells available before asserting DREQ */ - if (player->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) { - trigger_limit = UNIPERIF_FIFO_SIZE - transfer_size; - } else { - /* - * Since SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 - * FDMA_TRIGGER_LIMIT also controls when the state switches - * from OFF or STANDBY to AUDIO DATA. - */ - trigger_limit = transfer_size; - } - - /* Trigger limit must be an even number */ - if ((!trigger_limit % 2) || (trigger_limit != 1 && transfer_size % 2) || - (trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(player))) { - dev_err(player->dev, "invalid trigger limit %d\n", - trigger_limit); - return -EINVAL; - } - - SET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(player, trigger_limit); - - /* Uniperipheral setup depends on player type */ - switch (player->type) { - case SND_ST_UNIPERIF_TYPE_HDMI: - ret = uni_player_prepare_iec958(player, runtime); - break; - case SND_ST_UNIPERIF_TYPE_PCM: - ret = uni_player_prepare_pcm(player, runtime); - break; - case SND_ST_UNIPERIF_TYPE_SPDIF: - ret = uni_player_prepare_iec958(player, runtime); - break; - case SND_ST_UNIPERIF_TYPE_TDM: - ret = uni_player_prepare_tdm(player, runtime); - break; - default: - dev_err(player->dev, "invalid player type\n"); - return -EINVAL; - } - - if (ret) - return ret; - - switch (player->daifmt & SND_SOC_DAIFMT_INV_MASK) { - case SND_SOC_DAIFMT_NB_NF: - SET_UNIPERIF_I2S_FMT_LR_POL_LOW(player); - SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(player); - break; - case SND_SOC_DAIFMT_NB_IF: - SET_UNIPERIF_I2S_FMT_LR_POL_HIG(player); - SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(player); - break; - case SND_SOC_DAIFMT_IB_NF: - SET_UNIPERIF_I2S_FMT_LR_POL_LOW(player); - SET_UNIPERIF_I2S_FMT_SCLK_EDGE_FALLING(player); - break; - case SND_SOC_DAIFMT_IB_IF: - SET_UNIPERIF_I2S_FMT_LR_POL_HIG(player); - SET_UNIPERIF_I2S_FMT_SCLK_EDGE_FALLING(player); - break; - } - - switch (player->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_I2S: - SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(player); - SET_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(player); - break; - case SND_SOC_DAIFMT_LEFT_J: - SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(player); - SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(player); - break; - case SND_SOC_DAIFMT_RIGHT_J: - SET_UNIPERIF_I2S_FMT_ALIGN_RIGHT(player); - SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(player); - break; - default: - dev_err(player->dev, "format not supported\n"); - return -EINVAL; - } - - SET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(player, 0); - - - return sti_uniperiph_reset(player); -} - -static int uni_player_start(struct uniperif *player) -{ - int ret; - - /* The player should be stopped */ - if (player->state != UNIPERIF_STATE_STOPPED) { - dev_err(player->dev, "%s: invalid player state\n", __func__); - return -EINVAL; - } - - ret = clk_prepare_enable(player->clk); - if (ret) { - dev_err(player->dev, "%s: Failed to enable clock\n", __func__); - return ret; - } - - /* Clear any pending interrupts */ - SET_UNIPERIF_ITS_BCLR(player, GET_UNIPERIF_ITS(player)); - - /* Set the interrupt mask */ - SET_UNIPERIF_ITM_BSET_DMA_ERROR(player); - SET_UNIPERIF_ITM_BSET_FIFO_ERROR(player); - - /* Enable underflow recovery interrupts */ - if (player->underflow_enabled) { - SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE(player); - SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED(player); - } - - ret = sti_uniperiph_reset(player); - if (ret < 0) { - clk_disable_unprepare(player->clk); - return ret; - } - - /* - * Does not use IEC61937 features of the uniperipheral hardware. - * Instead it performs IEC61937 in software and inserts it directly - * into the audio data stream. As such, when encoded mode is selected, - * linear pcm mode is still used, but with the differences of the - * channel status bits set for encoded mode and the validity bits set. - */ - SET_UNIPERIF_CTRL_OPERATION_PCM_DATA(player); - - /* - * If iec958 formatting is required for hdmi or spdif, then it must be - * enabled after the operation mode is set. If set prior to this, it - * will not take affect and hang the player. - */ - if (player->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) - if (UNIPERIF_TYPE_IS_IEC958(player)) - SET_UNIPERIF_CTRL_SPDIF_FMT_ON(player); - - /* Force channel status update (no update if clk disable) */ - if (player->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) - SET_UNIPERIF_CONFIG_CHL_STS_UPDATE(player); - else - SET_UNIPERIF_BIT_CONTROL_CHL_STS_UPDATE(player); - - /* Update state to started */ - player->state = UNIPERIF_STATE_STARTED; - - return 0; -} - -static int uni_player_stop(struct uniperif *player) -{ - int ret; - - /* The player should not be in stopped state */ - if (player->state == UNIPERIF_STATE_STOPPED) { - dev_err(player->dev, "%s: invalid player state\n", __func__); - return -EINVAL; - } - - /* Turn the player off */ - SET_UNIPERIF_CTRL_OPERATION_OFF(player); - - ret = sti_uniperiph_reset(player); - if (ret < 0) - return ret; - - /* Disable interrupts */ - SET_UNIPERIF_ITM_BCLR(player, GET_UNIPERIF_ITM(player)); - - /* Disable clock */ - clk_disable_unprepare(player->clk); - - /* Update state to stopped and return */ - player->state = UNIPERIF_STATE_STOPPED; - - return 0; -} - -int uni_player_resume(struct uniperif *player) -{ - int ret; - - /* Select the frequency synthesizer clock */ - if (player->clk_sel) { - ret = regmap_field_write(player->clk_sel, 1); - if (ret) { - dev_err(player->dev, - "%s: Failed to select freq synth clock\n", - __func__); - return ret; - } - } - - SET_UNIPERIF_CONFIG_BACK_STALL_REQ_DISABLE(player); - SET_UNIPERIF_CTRL_ROUNDING_OFF(player); - SET_UNIPERIF_CTRL_SPDIF_LAT_OFF(player); - SET_UNIPERIF_CONFIG_IDLE_MOD_DISABLE(player); - - return 0; -} -EXPORT_SYMBOL_GPL(uni_player_resume); - -static int uni_player_trigger(struct snd_pcm_substream *substream, - int cmd, struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *player = priv->dai_data.uni; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - return uni_player_start(player); - case SNDRV_PCM_TRIGGER_STOP: - return uni_player_stop(player); - case SNDRV_PCM_TRIGGER_RESUME: - return uni_player_resume(player); - default: - return -EINVAL; - } -} - -static void uni_player_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *player = priv->dai_data.uni; - unsigned long flags; - - spin_lock_irqsave(&player->irq_lock, flags); - if (player->state != UNIPERIF_STATE_STOPPED) - /* Stop the player */ - uni_player_stop(player); - - player->substream = NULL; - spin_unlock_irqrestore(&player->irq_lock, flags); -} - -static int uni_player_parse_dt_audio_glue(struct platform_device *pdev, - struct uniperif *player) -{ - struct device_node *node = pdev->dev.of_node; - struct regmap *regmap; - struct reg_field regfield[2] = { - /* PCM_CLK_SEL */ - REG_FIELD(SYS_CFG_AUDIO_GLUE, - 8 + player->id, - 8 + player->id), - /* PCMP_VALID_SEL */ - REG_FIELD(SYS_CFG_AUDIO_GLUE, 0, 1) - }; - - regmap = syscon_regmap_lookup_by_phandle(node, "st,syscfg"); - - if (IS_ERR(regmap)) { - dev_err(&pdev->dev, "sti-audio-clk-glue syscf not found\n"); - return PTR_ERR(regmap); - } - - player->clk_sel = regmap_field_alloc(regmap, regfield[0]); - player->valid_sel = regmap_field_alloc(regmap, regfield[1]); - - return 0; -} - -static const struct snd_soc_dai_ops uni_player_dai_ops = { - .startup = uni_player_startup, - .shutdown = uni_player_shutdown, - .prepare = uni_player_prepare, - .trigger = uni_player_trigger, - .hw_params = sti_uniperiph_dai_hw_params, - .set_fmt = sti_uniperiph_dai_set_fmt, - .set_sysclk = uni_player_set_sysclk, - .set_tdm_slot = sti_uniperiph_set_tdm_slot -}; - -int uni_player_init(struct platform_device *pdev, - struct uniperif *player) -{ - int ret = 0; - - player->dev = &pdev->dev; - player->state = UNIPERIF_STATE_STOPPED; - player->dai_ops = &uni_player_dai_ops; - - /* Get PCM_CLK_SEL & PCMP_VALID_SEL from audio-glue-ctrl SoC reg */ - ret = uni_player_parse_dt_audio_glue(pdev, player); - - if (ret < 0) { - dev_err(player->dev, "Failed to parse DeviceTree\n"); - return ret; - } - - /* Underflow recovery is only supported on later ip revisions */ - if (player->ver >= SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) - player->underflow_enabled = 1; - - if (UNIPERIF_TYPE_IS_TDM(player)) - player->hw = &uni_tdm_hw; - else - player->hw = &uni_player_pcm_hw; - - /* Get uniperif resource */ - player->clk = of_clk_get(pdev->dev.of_node, 0); - if (IS_ERR(player->clk)) { - dev_err(player->dev, "Failed to get clock\n"); - return PTR_ERR(player->clk); - } - - /* Select the frequency synthesizer clock */ - if (player->clk_sel) { - ret = regmap_field_write(player->clk_sel, 1); - if (ret) { - dev_err(player->dev, - "%s: Failed to select freq synth clock\n", - __func__); - return ret; - } - } - - /* connect to I2S/TDM TX bus */ - if (player->valid_sel && - (player->id == UNIPERIF_PLAYER_I2S_OUT)) { - ret = regmap_field_write(player->valid_sel, player->id); - if (ret) { - dev_err(player->dev, - "%s: unable to connect to tdm bus\n", __func__); - return ret; - } - } - - ret = devm_request_irq(&pdev->dev, player->irq, - uni_player_irq_handler, IRQF_SHARED, - dev_name(&pdev->dev), player); - if (ret < 0) { - dev_err(player->dev, "unable to request IRQ %d\n", player->irq); - return ret; - } - - mutex_init(&player->ctrl_lock); - spin_lock_init(&player->irq_lock); - - /* Ensure that disabled by default */ - SET_UNIPERIF_CONFIG_BACK_STALL_REQ_DISABLE(player); - SET_UNIPERIF_CTRL_ROUNDING_OFF(player); - SET_UNIPERIF_CTRL_SPDIF_LAT_OFF(player); - SET_UNIPERIF_CONFIG_IDLE_MOD_DISABLE(player); - - if (UNIPERIF_TYPE_IS_IEC958(player)) { - /* Set default iec958 status bits */ - - /* Consumer, PCM, copyright, 2ch, mode 0 */ - player->stream_settings.iec958.status[0] = 0x00; - /* Broadcast reception category */ - player->stream_settings.iec958.status[1] = - IEC958_AES1_CON_GENERAL; - /* Do not take into account source or channel number */ - player->stream_settings.iec958.status[2] = - IEC958_AES2_CON_SOURCE_UNSPEC; - /* Sampling frequency not indicated */ - player->stream_settings.iec958.status[3] = - IEC958_AES3_CON_FS_NOTID; - /* Max sample word 24-bit, sample word length not indicated */ - player->stream_settings.iec958.status[4] = - IEC958_AES4_CON_MAX_WORDLEN_24 | - IEC958_AES4_CON_WORDLEN_24_20; - - player->num_ctrls = ARRAY_SIZE(snd_sti_iec_ctl); - player->snd_ctrls = snd_sti_iec_ctl[0]; - } else { - player->num_ctrls = ARRAY_SIZE(snd_sti_pcm_ctl); - player->snd_ctrls = snd_sti_pcm_ctl[0]; - } - - return 0; -} -EXPORT_SYMBOL_GPL(uni_player_init); diff --git a/sound/soc/sti/uniperif_reader.c b/sound/soc/sti/uniperif_reader.c deleted file mode 100644 index 136059331211..000000000000 --- a/sound/soc/sti/uniperif_reader.c +++ /dev/null @@ -1,436 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) STMicroelectronics SA 2015 - * Authors: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> - * for STMicroelectronics. - */ - -#include <sound/soc.h> - -#include "uniperif.h" - -#define UNIPERIF_READER_I2S_IN 0 /* reader id connected to I2S/TDM TX bus */ -/* - * Note: snd_pcm_hardware is linked to DMA controller but is declared here to - * integrate unireader capability in term of rate and supported channels - */ -static const struct snd_pcm_hardware uni_reader_pcm_hw = { - .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID, - .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE, - - .rates = SNDRV_PCM_RATE_CONTINUOUS, - .rate_min = 8000, - .rate_max = 96000, - - .channels_min = 2, - .channels_max = 8, - - .periods_min = 2, - .periods_max = 48, - - .period_bytes_min = 128, - .period_bytes_max = 64 * PAGE_SIZE, - .buffer_bytes_max = 256 * PAGE_SIZE -}; - -/* - * uni_reader_irq_handler - * In case of error audio stream is stopped; stop action is protected via PCM - * stream lock to avoid race condition with trigger callback. - */ -static irqreturn_t uni_reader_irq_handler(int irq, void *dev_id) -{ - irqreturn_t ret = IRQ_NONE; - struct uniperif *reader = dev_id; - unsigned int status; - - spin_lock(&reader->irq_lock); - if (!reader->substream) - goto irq_spin_unlock; - - snd_pcm_stream_lock(reader->substream); - if (reader->state == UNIPERIF_STATE_STOPPED) { - /* Unexpected IRQ: do nothing */ - dev_warn(reader->dev, "unexpected IRQ\n"); - goto stream_unlock; - } - - /* Get interrupt status & clear them immediately */ - status = GET_UNIPERIF_ITS(reader); - SET_UNIPERIF_ITS_BCLR(reader, status); - - /* Check for fifo overflow error */ - if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) { - dev_err(reader->dev, "FIFO error detected\n"); - - snd_pcm_stop_xrun(reader->substream); - - ret = IRQ_HANDLED; - } - -stream_unlock: - snd_pcm_stream_unlock(reader->substream); -irq_spin_unlock: - spin_unlock(&reader->irq_lock); - - return ret; -} - -static int uni_reader_prepare_pcm(struct snd_pcm_runtime *runtime, - struct uniperif *reader) -{ - int slot_width; - - /* Force slot width to 32 in I2S mode */ - if ((reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) - == SND_SOC_DAIFMT_I2S) { - slot_width = 32; - } else { - switch (runtime->format) { - case SNDRV_PCM_FORMAT_S16_LE: - slot_width = 16; - break; - default: - slot_width = 32; - break; - } - } - - /* Number of bits per subframe (i.e one channel sample) on input. */ - switch (slot_width) { - case 32: - SET_UNIPERIF_I2S_FMT_NBIT_32(reader); - SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(reader); - break; - case 16: - SET_UNIPERIF_I2S_FMT_NBIT_16(reader); - SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(reader); - break; - default: - dev_err(reader->dev, "subframe format not supported\n"); - return -EINVAL; - } - - /* Configure data memory format */ - switch (runtime->format) { - case SNDRV_PCM_FORMAT_S16_LE: - /* One data word contains two samples */ - SET_UNIPERIF_CONFIG_MEM_FMT_16_16(reader); - break; - - case SNDRV_PCM_FORMAT_S32_LE: - /* - * Actually "16 bits/0 bits" means "32/28/24/20/18/16 bits - * on the MSB then zeros (if less than 32 bytes)"... - */ - SET_UNIPERIF_CONFIG_MEM_FMT_16_0(reader); - break; - - default: - dev_err(reader->dev, "format not supported\n"); - return -EINVAL; - } - - /* Number of channels must be even */ - if ((runtime->channels % 2) || (runtime->channels < 2) || - (runtime->channels > 10)) { - dev_err(reader->dev, "%s: invalid nb of channels\n", __func__); - return -EINVAL; - } - - SET_UNIPERIF_I2S_FMT_NUM_CH(reader, runtime->channels / 2); - SET_UNIPERIF_I2S_FMT_ORDER_MSB(reader); - - return 0; -} - -static int uni_reader_prepare_tdm(struct snd_pcm_runtime *runtime, - struct uniperif *reader) -{ - int frame_size; /* user tdm frame size in bytes */ - /* default unip TDM_WORD_POS_X_Y */ - unsigned int word_pos[4] = { - 0x04060002, 0x0C0E080A, 0x14161012, 0x1C1E181A}; - - frame_size = sti_uniperiph_get_user_frame_size(runtime); - - /* fix 16/0 format */ - SET_UNIPERIF_CONFIG_MEM_FMT_16_0(reader); - SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(reader); - - /* number of words inserted on the TDM line */ - SET_UNIPERIF_I2S_FMT_NUM_CH(reader, frame_size / 4 / 2); - - SET_UNIPERIF_I2S_FMT_ORDER_MSB(reader); - SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader); - SET_UNIPERIF_TDM_ENABLE_TDM_ENABLE(reader); - - /* - * set the timeslots allocation for words in FIFO - * - * HW bug: (LSB word < MSB word) => this config is not possible - * So if we want (LSB word < MSB) word, then it shall be - * handled by user - */ - sti_uniperiph_get_tdm_word_pos(reader, word_pos); - SET_UNIPERIF_TDM_WORD_POS(reader, 1_2, word_pos[WORD_1_2]); - SET_UNIPERIF_TDM_WORD_POS(reader, 3_4, word_pos[WORD_3_4]); - SET_UNIPERIF_TDM_WORD_POS(reader, 5_6, word_pos[WORD_5_6]); - SET_UNIPERIF_TDM_WORD_POS(reader, 7_8, word_pos[WORD_7_8]); - - return 0; -} - -static int uni_reader_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *reader = priv->dai_data.uni; - struct snd_pcm_runtime *runtime = substream->runtime; - int transfer_size, trigger_limit, ret; - - /* The reader should be stopped */ - if (reader->state != UNIPERIF_STATE_STOPPED) { - dev_err(reader->dev, "%s: invalid reader state %d\n", __func__, - reader->state); - return -EINVAL; - } - - /* Calculate transfer size (in fifo cells and bytes) for frame count */ - if (reader->type == SND_ST_UNIPERIF_TYPE_TDM) { - /* transfer size = unip frame size (in 32 bits FIFO cell) */ - transfer_size = - sti_uniperiph_get_user_frame_size(runtime) / 4; - } else { - transfer_size = runtime->channels * UNIPERIF_FIFO_FRAMES; - } - - /* Calculate number of empty cells available before asserting DREQ */ - if (reader->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) - trigger_limit = UNIPERIF_FIFO_SIZE - transfer_size; - else - /* - * Since SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0 - * FDMA_TRIGGER_LIMIT also controls when the state switches - * from OFF or STANDBY to AUDIO DATA. - */ - trigger_limit = transfer_size; - - /* Trigger limit must be an even number */ - if ((!trigger_limit % 2) || - (trigger_limit != 1 && transfer_size % 2) || - (trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(reader))) { - dev_err(reader->dev, "invalid trigger limit %d\n", - trigger_limit); - return -EINVAL; - } - - SET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(reader, trigger_limit); - - if (UNIPERIF_TYPE_IS_TDM(reader)) - ret = uni_reader_prepare_tdm(runtime, reader); - else - ret = uni_reader_prepare_pcm(runtime, reader); - if (ret) - return ret; - - switch (reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_I2S: - SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader); - SET_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(reader); - break; - case SND_SOC_DAIFMT_LEFT_J: - SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader); - SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader); - break; - case SND_SOC_DAIFMT_RIGHT_J: - SET_UNIPERIF_I2S_FMT_ALIGN_RIGHT(reader); - SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader); - break; - default: - dev_err(reader->dev, "format not supported\n"); - return -EINVAL; - } - - /* Data clocking (changing) on the rising/falling edge */ - switch (reader->daifmt & SND_SOC_DAIFMT_INV_MASK) { - case SND_SOC_DAIFMT_NB_NF: - SET_UNIPERIF_I2S_FMT_LR_POL_LOW(reader); - SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(reader); - break; - case SND_SOC_DAIFMT_NB_IF: - SET_UNIPERIF_I2S_FMT_LR_POL_HIG(reader); - SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(reader); - break; - case SND_SOC_DAIFMT_IB_NF: - SET_UNIPERIF_I2S_FMT_LR_POL_LOW(reader); - SET_UNIPERIF_I2S_FMT_SCLK_EDGE_FALLING(reader); - break; - case SND_SOC_DAIFMT_IB_IF: - SET_UNIPERIF_I2S_FMT_LR_POL_HIG(reader); - SET_UNIPERIF_I2S_FMT_SCLK_EDGE_FALLING(reader); - break; - } - - /* Clear any pending interrupts */ - SET_UNIPERIF_ITS_BCLR(reader, GET_UNIPERIF_ITS(reader)); - - SET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(reader, 0); - - /* Set the interrupt mask */ - SET_UNIPERIF_ITM_BSET_DMA_ERROR(reader); - SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader); - SET_UNIPERIF_ITM_BSET_MEM_BLK_READ(reader); - - /* Enable underflow recovery interrupts */ - if (reader->underflow_enabled) { - SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE(reader); - SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED(reader); - } - - /* Reset uniperipheral reader */ - return sti_uniperiph_reset(reader); -} - -static int uni_reader_start(struct uniperif *reader) -{ - /* The reader should be stopped */ - if (reader->state != UNIPERIF_STATE_STOPPED) { - dev_err(reader->dev, "%s: invalid reader state\n", __func__); - return -EINVAL; - } - - /* Enable reader interrupts (and clear possible stalled ones) */ - SET_UNIPERIF_ITS_BCLR_FIFO_ERROR(reader); - SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader); - - /* Launch the reader */ - SET_UNIPERIF_CTRL_OPERATION_PCM_DATA(reader); - - /* Update state to started */ - reader->state = UNIPERIF_STATE_STARTED; - return 0; -} - -static int uni_reader_stop(struct uniperif *reader) -{ - /* The reader should not be in stopped state */ - if (reader->state == UNIPERIF_STATE_STOPPED) { - dev_err(reader->dev, "%s: invalid reader state\n", __func__); - return -EINVAL; - } - - /* Turn the reader off */ - SET_UNIPERIF_CTRL_OPERATION_OFF(reader); - - /* Disable interrupts */ - SET_UNIPERIF_ITM_BCLR(reader, GET_UNIPERIF_ITM(reader)); - - /* Update state to stopped and return */ - reader->state = UNIPERIF_STATE_STOPPED; - - return 0; -} - -static int uni_reader_trigger(struct snd_pcm_substream *substream, - int cmd, struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *reader = priv->dai_data.uni; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - return uni_reader_start(reader); - case SNDRV_PCM_TRIGGER_STOP: - return uni_reader_stop(reader); - default: - return -EINVAL; - } -} - -static int uni_reader_startup(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *reader = priv->dai_data.uni; - unsigned long flags; - int ret; - - spin_lock_irqsave(&reader->irq_lock, flags); - reader->substream = substream; - spin_unlock_irqrestore(&reader->irq_lock, flags); - - if (!UNIPERIF_TYPE_IS_TDM(reader)) - return 0; - - /* refine hw constraint in tdm mode */ - ret = snd_pcm_hw_rule_add(substream->runtime, 0, - SNDRV_PCM_HW_PARAM_CHANNELS, - sti_uniperiph_fix_tdm_chan, - reader, SNDRV_PCM_HW_PARAM_CHANNELS, - -1); - if (ret < 0) - return ret; - - return snd_pcm_hw_rule_add(substream->runtime, 0, - SNDRV_PCM_HW_PARAM_FORMAT, - sti_uniperiph_fix_tdm_format, - reader, SNDRV_PCM_HW_PARAM_FORMAT, - -1); -} - -static void uni_reader_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); - struct uniperif *reader = priv->dai_data.uni; - unsigned long flags; - - spin_lock_irqsave(&reader->irq_lock, flags); - if (reader->state != UNIPERIF_STATE_STOPPED) { - /* Stop the reader */ - uni_reader_stop(reader); - } - reader->substream = NULL; - spin_unlock_irqrestore(&reader->irq_lock, flags); -} - -static const struct snd_soc_dai_ops uni_reader_dai_ops = { - .startup = uni_reader_startup, - .shutdown = uni_reader_shutdown, - .prepare = uni_reader_prepare, - .trigger = uni_reader_trigger, - .hw_params = sti_uniperiph_dai_hw_params, - .set_fmt = sti_uniperiph_dai_set_fmt, - .set_tdm_slot = sti_uniperiph_set_tdm_slot -}; - -int uni_reader_init(struct platform_device *pdev, - struct uniperif *reader) -{ - int ret = 0; - - reader->dev = &pdev->dev; - reader->state = UNIPERIF_STATE_STOPPED; - reader->dai_ops = &uni_reader_dai_ops; - - if (UNIPERIF_TYPE_IS_TDM(reader)) - reader->hw = &uni_tdm_hw; - else - reader->hw = &uni_reader_pcm_hw; - - ret = devm_request_irq(&pdev->dev, reader->irq, - uni_reader_irq_handler, IRQF_SHARED, - dev_name(&pdev->dev), reader); - if (ret < 0) { - dev_err(&pdev->dev, "Failed to request IRQ\n"); - return -EBUSY; - } - - spin_lock_init(&reader->irq_lock); - - return 0; -} -EXPORT_SYMBOL_GPL(uni_reader_init); -- 2.35.1

4 9

[PATCH v10 0/7] Add pin control support for lpass sc7280
by Srinivasa Rao Mandadapu 15 Mar '22

15 Mar '22

This patch series is to split lpass variant common pin control functions and SoC specific functions and to add lpass sc7280 pincontrol support. It also Adds dt-bindings for lpass sc7280 lpass lpi pincontrol. Changes Since V9: -- Add pinctrl groups macro to Kconfig. Changes Since V8: -- Remove redundant headers included in v8. Changes Since V7: -- Update optional clock voting with conditional check. -- Add const to lpi_pinctrl_variant_data structure. -- Update required headers and remove redundant. -- Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL -- Fix typo errors. Changes Since V6: -- Update conditional clock voting to optional clock voting. -- Update Kconfig depends on field with select. -- Fix typo errors. Changes Since V5: -- Create new patch by updating macro name to lpi specific. -- Create new patch by updating lpi pin group structure with core group_desc structure. -- Fix typo errors. -- Sort macros in the make file and configuration file. Changes Since V4: -- Update commit message and description of the chip specific extraction patch. -- Sort macros in kconfig and makefile. -- Update optional clock voting to conditional clock voting. -- Fix typo errors. -- Move to quicinc domain email id's. Changes Since V3: -- Update separate Kconfig fields for sm8250 and sc7280. -- Update module license and description. -- Move static variables to corresponding .c files from header file. Changes Since V2: -- Add new dt-bindings for sc7280 lpi driver. -- Make clock voting change as separate patch. -- Split existing pincontrol driver and make common functions as part of separate file. -- Rename lpass pincontrol lpi dt-bindings to sm8250 specific dt-bindings Changes Since V1: -- Make lpi pinctrl variant data structure as constant -- Add appropriate commit message -- Change signedoff by sequence. Srinivasa Rao Mandadapu (7): dt-bindings: pinctrl: qcom: Update lpass lpi file name to SoC specific dt-bindings: pinctrl: qcom: Add sc7280 lpass lpi pinctrl bindings pinctrl: qcom: Update macro name to LPI specific pinctrl: qcom: Update lpi pin group structure pinctrl: qcom: Extract chip specific LPASS LPI code pinctrl: qcom: Add SC7280 lpass pin configuration pinctrl: qcom: Update clock voting as optional Tested this on SM8250 MTP with WSA and WCD codecs. Tested-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> .../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 133 ----------- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 ++++++++++ .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 133 +++++++++++ drivers/pinctrl/qcom/Kconfig | 17 ++ drivers/pinctrl/qcom/Makefile | 2 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 255 ++------------------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 86 +++++++ drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 168 ++++++++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 165 +++++++++++++ 9 files changed, 704 insertions(+), 370 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c -- 2.7.4

2 14

[PATCH] [v2] nvme-pci: disable write zeros support on specific SSDs
by Mark Hsieh 15 Mar '22

15 Mar '22

Like commit 5611ec2b9814 ("nvme-pci: prevent SK hynix PC400 from using Write Zeroes command"), Micron has the same issue: [ 6305.633887] blk_update_request: operation not supported error, dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 So also disable Write Zeroes command on Micron. Signed-off-by: Mark Hsieh <mark_hsieh(a)wistron.corp-partner.google.com> --- drivers/nvme/host/pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index a7a502a5b2b5..68745e1d7b6a 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3245,6 +3245,8 @@ static const struct pci_device_id nvme_id_table[] = { .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE(0x2646, 0x500d), /* Kingston OM3PDP3256B-AH 256G */ .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, + { PCI_DEVICE(0x1344, 0x5411), /* Micron 2450 MTFDKCD256TFK 256G */ + .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { PCI_DEVICE(0x2646, 0x2263), /* KINGSTON A2000 NVMe SSD */ .driver_data = NVME_QUIRK_NO_DEEPEST_PS, }, -- 2.17.1

3 2

[PATCH] nvme-pci: disable write zeros support on specific SSDs
by Mark Hsieh 15 Mar '22

15 Mar '22

Like commit 5611ec2b9814 ("nvme-pci: prevent SK hynix PC400 from using Write Zeroes command"), Micron has the same issue: [ 6305.633887] blk_update_request: operation not supported error, dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 So also disable Write Zeroes command on Micron. Signed-off-by: Mark Hsieh <mark_hsieh(a)wistron.corp-partner.google.com> Change-Id: Ic6ebfe141702d1869490bbf210627055b5b4d80f --- drivers/nvme/host/pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index a7a502a5b2b5..68745e1d7b6a 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3245,6 +3245,8 @@ static const struct pci_device_id nvme_id_table[] = { .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE(0x2646, 0x500d), /* Kingston OM3PDP3256B-AH 256G */ .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, + { PCI_DEVICE(0x1344, 0x5411), /* Micron 2450 MTFDKCD256TFK 256G */ + .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { PCI_DEVICE(0x2646, 0x2263), /* KINGSTON A2000 NVMe SSD */ .driver_data = NVME_QUIRK_NO_DEEPEST_PS, }, -- 2.17.1

1 0

[PATCH] ASoC: tlv320aic3x: add dmic widget support
by Gregory CLEMENT 15 Mar '22

15 Mar '22

This patch allows to use dmic to record sound. This is a port from a variscite patch written by Eran Matityahu <eran.m(a)variscite.com>. Signed-off-by: Gregory CLEMENT <gregory.clement(a)bootlin.com> --- sound/soc/codecs/tlv320aic3x.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index d53037b1509d..426f92cc44da 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -296,6 +296,11 @@ static SOC_ENUM_SINGLE_DECL(aic3x_poweron_time_enum, HPOUT_POP_REDUCTION, 4, static const char * const aic3x_rampup_step[] = { "0ms", "1ms", "2ms", "4ms" }; static SOC_ENUM_SINGLE_DECL(aic3x_rampup_step_enum, HPOUT_POP_REDUCTION, 2, aic3x_rampup_step); +static const char * const aic3x_dmic_rates[] = { "off", "128x", "64x", "32x" }; +static SOC_ENUM_SINGLE_DECL(aic3x_dmic_rates_enum, AIC3X_ASD_INTF_CTRLA, 0, + aic3x_dmic_rates); +static const struct snd_kcontrol_new aic3x_dmic_rates_controls = + SOC_DAPM_ENUM("Route", aic3x_dmic_rates_enum); /* * DAC digital volumes. From -63.5 to 0 dB in 0.5 dB steps @@ -751,6 +756,9 @@ static const struct snd_soc_dapm_widget aic3x_extra_dapm_widgets[] = { SND_SOC_DAPM_INPUT("MIC3R"), SND_SOC_DAPM_INPUT("LINE2L"), SND_SOC_DAPM_INPUT("LINE2R"), + + SND_SOC_DAPM_MUX("DMic Rate", SND_SOC_NOPM, 0, 0, &aic3x_dmic_rates_controls), + SND_SOC_DAPM_INPUT("DMIC"), }; /* For tlv320aic3104 */ @@ -939,6 +947,12 @@ static const struct snd_soc_dapm_route intercon_extra[] = { {"GPIO1 dmic modclk", NULL, "DMic Rate 64"}, {"GPIO1 dmic modclk", NULL, "DMic Rate 32"}, + {"GPIO1 dmic modclk", NULL, "DMic Rate"}, + {"DMic Rate", "128x", "DMIC"}, + {"DMic Rate", "64x", "DMIC"}, + {"DMic Rate", "32x", "DMIC"}, + {"DMic Rate", "off", "DMIC"}, + /* Left Line Output */ {"Left Line Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, {"Left Line Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, -- 2.34.1

2 2

[PATCH 1/4] Asoc: tas2764 : new tas27xx driver to support either tas2764 or tas2780
by Xu, Yang 15 Mar '22

15 Mar '22

Hi Mark and Takashi Iwai, This is Raphael Xu who is from Low Power Audio team,Texas Instrument. Could you help to review the attached patch and upstream them to the kernel? Thanks. Change log: Path: sound/soc/codecs 1. This patch to support either TAS2764 or TAS2780 device from TI 2. Fixed "no sound" issue on some platforms. Regards Raphael

2 1

[PATCH 4/4] Asoc: tas2764 : new tas27xx driver to support either tas2764 or tas2780
by Xu, Yang 15 Mar '22

15 Mar '22

Change log: Path: sound/soc/codecs 1. This patch to support either TAS2764 or TAS2780 device from TI 2. Fixed "no sound" issue on some platforms. Regards Raphael

1 0

[PATCH 3/4] Asoc: tas2764 : new tas27xx driver to support either tas2764 or tas2780
by Xu, Yang 15 Mar '22

15 Mar '22

Change log: Path: sound/soc/codecs 1. This patch to support either TAS2764 or TAS2780 device from TI 2. Fixed "no sound" issue on some platforms. Regards Raphael

1 0

[PATCH 2/4] Asoc: tas2764 : new tas27xx driver to support either tas2764 or tas2780
by Xu, Yang 15 Mar '22

15 Mar '22

Change log: Path: sound/soc/codecs 1. This patch to support either TAS2764 or TAS2780 device from TI 2. Fixed "no sound" issue on some platforms. Regards Raphael

1 0

[PATCH 0/6] use kzalloc
by Julia Lawall 14 Mar '22

14 Mar '22

Use kzalloc instead of kmalloc + memset. --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 3 +-- drivers/net/wireless/zydas/zd1201.c | 3 +-- drivers/scsi/lpfc/lpfc_debugfs.c | 9 ++------- drivers/usb/gadget/legacy/raw_gadget.c | 3 +-- fs/cifs/transport.c | 3 +-- sound/core/seq/oss/seq_oss_init.c | 3 +-- 6 files changed, 7 insertions(+), 17 deletions(-)

4 4

[PATCH 0/2] x86: Avoid CONFIG_X86_X32_ABI=y with llvm-objcopy
by Nathan Chancellor 14 Mar '22

14 Mar '22

This series disables CONFIG_X86_X32_ABI=y with llvm-objcopy, which has had two outstanding issues, which are further outlined in the second patch: https://github.com/ClangBuiltLinux/linux/issues/514 https://github.com/ClangBuiltLinux/linux/issues/1141 The first patch is from Masahiro, which moves the CONFIG_X86_X32_ABI back into Kconfig proper. It was initially pushed as an RFC: https://lore.kernel.org/r/20210227183910.221873-1-masahiroy@kernel.org/ The conclusion of that thread was that the check was still needed because of the two issues above. However, with the introduction of IBT, specifically commit 41c5ef31ad71 ("x86/ibt: Base IBT bits"), the second issue linked above becomes visible with allmodconfig, which heavily impacts automated testing. The second patch builds on the first by just universally disabling CONFIG_X86_X32_ABI when using llvm-objcopy at configuration time so that neither issue is visible. While it is unlikely that these issues will be fixed in LLVM, this could eventually become a version check. This is based on -tip x86/core and I would like for both patches to go with the IBT changes so that there is no build breakage. Masahiro Yamada (1): x86: Remove toolchain check for X32 ABI capability Nathan Chancellor (1): x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy arch/x86/Kconfig | 13 +++++++------ arch/x86/Makefile | 16 ---------------- arch/x86/entry/syscalls/Makefile | 2 +- arch/x86/include/asm/syscall_wrapper.h | 6 +++--- arch/x86/include/asm/vdso.h | 2 +- arch/x86/kernel/process_64.c | 2 +- fs/fuse/ioctl.c | 2 +- fs/xfs/xfs_ioctl32.c | 2 +- sound/core/control_compat.c | 16 ++++++++-------- sound/core/pcm_compat.c | 20 ++++++++++---------- 10 files changed, 33 insertions(+), 48 deletions(-) base-commit: f8afc9d88e65d189653f363eacc1f3131216ef7c -- 2.35.1

2 3

[PATCH v5 00/17] ASoC: Intel: AVS - Audio DSP for cAVS
by Cezary Rojewski 14 Mar '22

14 Mar '22

A continuation of cleanup work of Intel SST solutions found in sound/soc/intel/. With two major chapters released last year catpt [1] and removal of haswell solution [2], time has come for Skylake-driver. Througout 2019, 2020 and 2021 Skylake-driver has had many fixes applied and even attempts of refactors as seen in fundamental overhaul [3], IPC flow adjustments [4] and LARGE_CONFIG overhaul [5] series. Unfortunately, story repeats itself - problems are found within the core of a driver. Painting it with different colors does not change the fact that is it still a house of cards. As changes needed to address those issues would make Skylake solution incompatible with its previous revisions, a decision has been made to provide a new solution instead. In time it would deprecate and replace Skylake-driver. That solution has been called AVS - from AudioDSP architecture name: Audio-Voice-Speech. It is meant to provide support for the exact same range of platforms as its predecessor: SKL, KBL, AML and APL. Note: this series is dependent upon HDA-series [6] which exposes several codec-organization functions allowing for reduced code size on avs-driver side. Note: this series does not add fully functional driver as its size would get out of control. Here, focus is put on adding IPC protocol and code loading code. Changes v4 -> v5: - dropped WARN()s usage as requested by Pierre - another round of typo fixes - aligned code to make use of 100-char-per-line limit - updated the dates in source and header files, it's 2022 already Changes v3 -> v4: - noted the limitations of LARGE_CONFIG_GET handler and dropped non-inclusive wording as requested by Pierre and Ranjani - code loading flow now verifies if power downing non-MAIN_CORE fails - commented kfree() usage in FW_CONFIG and HW_CONFIG getters Changes v2 -> v3: - fixed variable initialization errors mentioned by sparse Changes v1 -> v2: Almost all updates here are thanks to feedback from Pierre. - several comments and few kernel-docs have been added in areas which felt more or less unclear - avs_ipc_wait_busy_completion() now spins up to 'repeats_left' number of times before giving up - 'adsp_ba' field of struct avs_dev has been renamed to 'dsp_ba' - 'dops' field of struct avs_spec has been renamed to 'dsp_ops' - IPC abstraction has been simplified: SKL_ADSP_REG_HIP* regs are used directly - fixed allnoconfig with AVS enabled compilation issues - fixed code loading error paths: previously requested firmware is now released before function return to the caller - code and function arguments tied to D0IX support have been removed from this patchset and will be part of followup series adding that feature instead - enriched dev_err() messages in avs_dsp_get_core() and avs_dsp_put_core() - numerous wording fixes used in power/reset/stall DSP operations Changes RFC v1 [7]: -> v1: - separated HDA codec-organization patches, path and topology handling, PCM and complementary features such as recovery from this series to ease the review process - fixed EXPORT_SYMBOL_GPL for exported members of ASoC framework - result of stall() is now checked when sending ROM message - result of snd_hdac_ext_stream_set_spib() is now checked when loading basefw - if basefw is not ready, notification processing is now skipped - documented several topology parsing helpers Changes [internal] RFC v2 -> [public] RFC v1: - dropped any sysfs related changes from this series, moved to follow up one - dropped entire subscription-mechanism found in ipc.c. Handlers that are delegated to service certain firmware notifications are now called directly - fixed kernel doc for snd_soc_dapm_new_dai_widgets() as reported by ikp - prefixed snd_hda_codec_device_init() as suggested by Amadeo - improved comments for d0ix transitions for APL-based platforms as suggested by Pierre - a ton of spelling related fixes in most of the commit messages - fixed remaining warnings pointed by scan-build (variable assigned but not used) - replaced most of 'cAVS X.Y' expression usages with 'platform-based' equivalents as suggested by Pierre e.g.: cAVS 1.5 -> SKL-based Changes [internal] RFC v1 -> [internal] RFC v2: - fixed memleak caused by lack of kfree(vols) if memory allocation fails in avs_peakvol_create() as reported by Curtis - fixed missing 'i' iterator incrementation in avs_widget_ready() causing reference loss as reported by Curtis - replace hardcode: 0x40 usage with snd_hdac_calc_stream_format as suggested by Curtis. In consequence, readability for all code loading (CL) procedues has increased and such approach auto-documents the CL stream preparation - updated behavior of all index-fetching functions found in utils.c: avs_module_entry_index(), avs_module_id_entry_index() and follow ups: avs_get_module_entry(), avs_get_module_id_entry() to better conform to linux-kernel standard when no entry is found (return -ENOENT) rather than C++ standard (return -1, what in kernel case translated to -EPERM) as suggested by Curtis and Peter - several suggestions have been made regarding spacing, and so far, I've agreed and applied with all of them. None proposed seemed out of place or redundant - avs_path_stop() renamed to avs_path_pause() pipeline states are represented by RESET/PAUSED/RUNNING. avs_path_reset() and avs_path_run() were already there and avs_path_stop() just didn't look cohesive - added missing parsers for num_output_pin and num_input_pin which are required for custom modules such as WAVES or DSM - dropped 'priv_param_length' from custom module descriptor as this field is obsolete in firmware - parse_dictionary() has been split into parse_dictionary_header() and parse_dictionary_entries() to drop code duplication present in several parsing function which could not re-use entire parse_dictionary() - added avs_tplg_vendor_array_lookup_next() and avs_tplg_vendor_entry_next() to drop code duplicated present in several parsing functions. This change greatly impacted readability of all parsers - parsing helpers such avs_tplg_vendor_array_lookup() now return offset by updating specified in function argument list u32 *offset variable. This is to address problem when u32 offset would be greater than max int, which is the return type for these functions - AVS_DEFINE_PTR_PARSER() macro has been introduced to drop code duplication for all ptr-parsing users - all struct avs_path_module creators have had their declaration updated: function argument *owner ceased to exist as it could already be accessed by mod->owner - fixed the order of operation for conditional paths (e.g.: echo reference) so these are no longer controlled by "source" path and instead are impacted by state changes of source and sink paths both. Previously only source path e.g. playback sourcing echo reference would trigger RUNNING status for conditional path. Equivalent RUNNING on WoV path which is in this case sink path, would not do so, leading to order-of-operation problems. Behavior has been changed to: both source and sink need to be RUNNING for conditional path to be set to RUNNING too. PAUSED for either source or sink will cause PAUSED transition for conditional path. - to achieve the above, path states are now saved in 'state' i.e. new u32 field for struct avs_path - resigned from fw_filename field usage in favour of newly added tplg_filename for machine board descriptors as suggested by Pierre - platform descriptor fields have had their names update better reflect their purpose as suggested by Pierre - fixed comp_list missing locking when manipulated - all message senders now accept request as pointer as suggeseted by Peter - resigned of AZX_ usage for all ADSP-related registers, leaving them only for HOST memory space related operations - fixed disable path for core DSP operations: power/reset/stall as reported by Peter - safety when locking between received responses (reply vs notification) has been lowered as suggested by Pierre. Most usages are not performed in IRQ context and none is done in hard-IRQ one - s/master/main/ plus AVS_MAIN_CORE_MASK has replaced ->master_mask - several functions have had their logging updated - logs have been moved to lower level functions as suggested by Pierre - hdac_ext_stream usage has been streamlined to estream, hdac_streams are represented by hstream instead - hw_params() are resilient to scenarios when they are called mutliple times as reported by Pierre - avs_dsp_enable() now collapses if any of its steps fails as reported by Pierre and Peter - avs_module_ida_empty() now returns value of type bool as suggested by Bard [1]: https://www.spinics.net/lists/alsa-devel/msg116440.html [2]: https://www.spinics.net/lists/alsa-devel/msg116901.html [3]: https://www.spinics.net/lists/alsa-devel/msg94199.html [4]: https://www.spinics.net/lists/alsa-devel/msg92588.html [5]: https://lore.kernel.org/all/20190808181549.12521-1-cezary.rojewski@intel.co… [6]: https://lore.kernel.org/alsa-devel/20220207114906.3759800-1-cezary.rojewski… [7]: https://lore.kernel.org/all/20211208111301.1817725-1-cezary.rojewski@intel.… Cezary Rojewski (17): ALSA: hda: Add helper macros for DSP capable devices ASoC: Export DAI register and widget ctor and dctor functions ASoC: Intel: Introduce AVS driver ASoC: Intel: avs: Inter process communication ASoC: Intel: avs: Add code loading requests ASoC: Intel: avs: Add pipeline management requests ASoC: Intel: avs: Add module management requests ASoC: Intel: avs: Add power management requests ASoC: Intel: avs: Add ROM requests ASoC: Intel: avs: Add basefw runtime-parameter requests ASoC: Intel: avs: Firmware resources management utilities ASoC: Intel: avs: Declare module configuration types ASoC: Intel: avs: Dynamic firmware resources management ASoC: Intel: avs: General code loading flow ASoC: Intel: avs: Implement CLDMA transfer ASoC: Intel: avs: Code loading over CLDMA ASoC: Intel: avs: Code loading over HDA include/sound/hdaudio.h | 3 + include/sound/hdaudio_ext.h | 50 +++ include/sound/soc-dapm.h | 1 + sound/soc/intel/Kconfig | 12 + sound/soc/intel/Makefile | 1 + sound/soc/intel/avs/Makefile | 6 + sound/soc/intel/avs/avs.h | 247 +++++++++++ sound/soc/intel/avs/cldma.c | 316 ++++++++++++++ sound/soc/intel/avs/cldma.h | 29 ++ sound/soc/intel/avs/core.c | 61 +++ sound/soc/intel/avs/dsp.c | 302 +++++++++++++ sound/soc/intel/avs/ipc.c | 382 ++++++++++++++++ sound/soc/intel/avs/loader.c | 608 ++++++++++++++++++++++++++ sound/soc/intel/avs/messages.c | 695 +++++++++++++++++++++++++++++ sound/soc/intel/avs/messages.h | 752 ++++++++++++++++++++++++++++++++ sound/soc/intel/avs/registers.h | 75 ++++ sound/soc/intel/avs/utils.c | 301 +++++++++++++ sound/soc/soc-core.c | 1 + sound/soc/soc-dapm.c | 15 + 19 files changed, 3857 insertions(+) create mode 100644 sound/soc/intel/avs/Makefile create mode 100644 sound/soc/intel/avs/avs.h create mode 100644 sound/soc/intel/avs/cldma.c create mode 100644 sound/soc/intel/avs/cldma.h create mode 100644 sound/soc/intel/avs/core.c create mode 100644 sound/soc/intel/avs/dsp.c create mode 100644 sound/soc/intel/avs/ipc.c create mode 100644 sound/soc/intel/avs/loader.c create mode 100644 sound/soc/intel/avs/messages.c create mode 100644 sound/soc/intel/avs/messages.h create mode 100644 sound/soc/intel/avs/registers.h create mode 100644 sound/soc/intel/avs/utils.c -- 2.25.1

3 21

[PATCH v4 00/17] ASoC: Intel: AVS - Audio DSP for cAVS
by Cezary Rojewski 14 Mar '22

14 Mar '22

A continuation of cleanup work of Intel SST solutions found in sound/soc/intel/. With two major chapters released last year catpt [1] and removal of haswell solution [2], time has come for Skylake-driver. Througout 2019, 2020 and 2021 Skylake-driver has had many fixes applied and even attempts of refactors as seen in fundamental overhaul [3], IPC flow adjustments [4] and LARGE_CONFIG overhaul [5] series. Unfortunately, story repeats itself - problems are found within the core of a driver. Painting it with different colors does not change the fact that is it still a house of cards. As changes needed to address those issues would make Skylake solution incompatible with its previous revisions, a decision has been made to provide a new solution instead. In time it would deprecate and replace Skylake-driver. That solution has been called AVS - from AudioDSP architecture name: Audio-Voice-Speech. It is meant to provide support for the exact same range of platforms as its predecessor: SKL, KBL, AML and APL. Note: this series is dependent upon HDA-series [6] which exposes several codec-organization functions allowing for reduced code size on avs-driver side. Note: this series does not add fully functional driver as its size would get out of control. Here, focus is put on adding IPC protocol and code loading code. Changes v3 -> v4: - noted the limitations of LARGE_CONFIG_GET handler and dropped non-inclusive wording as requested by Pierre and Ranjani - code loading flow now verifies if power downing non-MAIN_CORE fails - commented kfree() usage in FW_CONFIG and HW_CONFIG getters Changes v2 -> v3: - fixed variable initialization errors mentioned by sparse Changes v1 -> v2: Almost all updates here are thanks to feedback from Pierre. - several comments and few kernel-docs have been added in areas which felt more or less unclear - avs_ipc_wait_busy_completion() now spins up to 'repeats_left' number of times before giving up - 'adsp_ba' field of struct avs_dev has been renamed to 'dsp_ba' - 'dops' field of struct avs_spec has been renamed to 'dsp_ops' - IPC abstraction has been simplified: SKL_ADSP_REG_HIP* regs are used directly - fixed allnoconfig with AVS enabled compilation issues - fixed code loading error paths: previously requested firmware is now released before function return to the caller - code and function arguments tied to D0IX support have been removed from this patchset and will be part of followup series adding that feature instead - enriched dev_err() messages in avs_dsp_get_core() and avs_dsp_put_core() - numerous wording fixes used in power/reset/stall DSP operations Changes RFC v1 [7]: -> v1: - separated HDA codec-organization patches, path and topology handling, PCM and complementary features such as recovery from this series to ease the review process - fixed EXPORT_SYMBOL_GPL for exported members of ASoC framework - result of stall() is now checked when sending ROM message - result of snd_hdac_ext_stream_set_spib() is now checked when loading basefw - if basefw is not ready, notification processing is now skipped - documented several topology parsing helpers Changes [internal] RFC v2 -> [public] RFC v1: - dropped any sysfs related changes from this series, moved to follow up one - dropped entire subscription-mechanism found in ipc.c. Handlers that are delegated to service certain firmware notifications are now called directly - fixed kernel doc for snd_soc_dapm_new_dai_widgets() as reported by ikp - prefixed snd_hda_codec_device_init() as suggested by Amadeo - improved comments for d0ix transitions for APL-based platforms as suggested by Pierre - a ton of spelling related fixes in most of the commit messages - fixed remaining warnings pointed by scan-build (variable assigned but not used) - replaced most of 'cAVS X.Y' expression usages with 'platform-based' equivalents as suggested by Pierre e.g.: cAVS 1.5 -> SKL-based Changes [internal] RFC v1 -> [internal] RFC v2: - fixed memleak caused by lack of kfree(vols) if memory allocation fails in avs_peakvol_create() as reported by Curtis - fixed missing 'i' iterator incrementation in avs_widget_ready() causing reference loss as reported by Curtis - replace hardcode: 0x40 usage with snd_hdac_calc_stream_format as suggested by Curtis. In consequence, readability for all code loading (CL) procedues has increased and such approach auto-documents the CL stream preparation - updated behavior of all index-fetching functions found in utils.c: avs_module_entry_index(), avs_module_id_entry_index() and follow ups: avs_get_module_entry(), avs_get_module_id_entry() to better conform to linux-kernel standard when no entry is found (return -ENOENT) rather than C++ standard (return -1, what in kernel case translated to -EPERM) as suggested by Curtis and Peter - several suggestions have been made regarding spacing, and so far, I've agreed and applied with all of them. None proposed seemed out of place or redundant - avs_path_stop() renamed to avs_path_pause() pipeline states are represented by RESET/PAUSED/RUNNING. avs_path_reset() and avs_path_run() were already there and avs_path_stop() just didn't look cohesive - added missing parsers for num_output_pin and num_input_pin which are required for custom modules such as WAVES or DSM - dropped 'priv_param_length' from custom module descriptor as this field is obsolete in firmware - parse_dictionary() has been split into parse_dictionary_header() and parse_dictionary_entries() to drop code duplication present in several parsing function which could not re-use entire parse_dictionary() - added avs_tplg_vendor_array_lookup_next() and avs_tplg_vendor_entry_next() to drop code duplicated present in several parsing functions. This change greatly impacted readability of all parsers - parsing helpers such avs_tplg_vendor_array_lookup() now return offset by updating specified in function argument list u32 *offset variable. This is to address problem when u32 offset would be greater than max int, which is the return type for these functions - AVS_DEFINE_PTR_PARSER() macro has been introduced to drop code duplication for all ptr-parsing users - all struct avs_path_module creators have had their declaration updated: function argument *owner ceased to exist as it could already be accessed by mod->owner - fixed the order of operation for conditional paths (e.g.: echo reference) so these are no longer controlled by "source" path and instead are impacted by state changes of source and sink paths both. Previously only source path e.g. playback sourcing echo reference would trigger RUNNING status for conditional path. Equivalent RUNNING on WoV path which is in this case sink path, would not do so, leading to order-of-operation problems. Behavior has been changed to: both source and sink need to be RUNNING for conditional path to be set to RUNNING too. PAUSED for either source or sink will cause PAUSED transition for conditional path. - to achieve the above, path states are now saved in 'state' i.e. new u32 field for struct avs_path - resigned from fw_filename field usage in favour of newly added tplg_filename for machine board descriptors as suggested by Pierre - platform descriptor fields have had their names update better reflect their purpose as suggested by Pierre - fixed comp_list missing locking when manipulated - all message senders now accept request as pointer as suggeseted by Peter - resigned of AZX_ usage for all ADSP-related registers, leaving them only for HOST memory space related operations - fixed disable path for core DSP operations: power/reset/stall as reported by Peter - safety when locking between received responses (reply vs notification) has been lowered as suggested by Pierre. Most usages are not performed in IRQ context and none is done in hard-IRQ one - s/master/main/ plus AVS_MAIN_CORE_MASK has replaced ->master_mask - several functions have had their logging updated - logs have been moved to lower level functions as suggested by Pierre - hdac_ext_stream usage has been streamlined to estream, hdac_streams are represented by hstream instead - hw_params() are resilient to scenarios when they are called mutliple times as reported by Pierre - avs_dsp_enable() now collapses if any of its steps fails as reported by Pierre and Peter - avs_module_ida_empty() now returns value of type bool as suggested by Bard [1]: https://www.spinics.net/lists/alsa-devel/msg116440.html [2]: https://www.spinics.net/lists/alsa-devel/msg116901.html [3]: https://www.spinics.net/lists/alsa-devel/msg94199.html [4]: https://www.spinics.net/lists/alsa-devel/msg92588.html [5]: https://lore.kernel.org/all/20190808181549.12521-1-cezary.rojewski@intel.co… [6]: https://lore.kernel.org/alsa-devel/20220207114906.3759800-1-cezary.rojewski… [7]: https://lore.kernel.org/all/20211208111301.1817725-1-cezary.rojewski@intel.… Cezary Rojewski (17): ALSA: hda: Add helper macros for DSP capable devices ASoC: Export DAI register and widget ctor and dctor functions ASoC: Intel: Introduce AVS driver ASoC: Intel: avs: Inter process communication ASoC: Intel: avs: Add code loading requests ASoC: Intel: avs: Add pipeline management requests ASoC: Intel: avs: Add module management requests ASoC: Intel: avs: Add power management requests ASoC: Intel: avs: Add ROM requests ASoC: Intel: avs: Add basefw runtime-parameter requests ASoC: Intel: avs: Firmware resources management utilities ASoC: Intel: avs: Declare module configuration types ASoC: Intel: avs: Dynamic firmware resources management ASoC: Intel: avs: General code loading flow ASoC: Intel: avs: Implement CLDMA transfer ASoC: Intel: avs: Code loading over CLDMA ASoC: Intel: avs: Code loading over HDA include/sound/hdaudio.h | 2 + include/sound/hdaudio_ext.h | 50 +++ include/sound/soc-dapm.h | 1 + sound/soc/intel/Kconfig | 12 + sound/soc/intel/Makefile | 1 + sound/soc/intel/avs/Makefile | 6 + sound/soc/intel/avs/avs.h | 248 +++++++++++ sound/soc/intel/avs/cldma.c | 317 ++++++++++++++ sound/soc/intel/avs/cldma.h | 29 ++ sound/soc/intel/avs/core.c | 62 +++ sound/soc/intel/avs/dsp.c | 303 +++++++++++++ sound/soc/intel/avs/ipc.c | 393 +++++++++++++++++ sound/soc/intel/avs/loader.c | 610 ++++++++++++++++++++++++++ sound/soc/intel/avs/messages.c | 699 +++++++++++++++++++++++++++++ sound/soc/intel/avs/messages.h | 753 ++++++++++++++++++++++++++++++++ sound/soc/intel/avs/registers.h | 75 ++++ sound/soc/intel/avs/utils.c | 301 +++++++++++++ sound/soc/soc-core.c | 1 + sound/soc/soc-dapm.c | 15 + 19 files changed, 3878 insertions(+) create mode 100644 sound/soc/intel/avs/Makefile create mode 100644 sound/soc/intel/avs/avs.h create mode 100644 sound/soc/intel/avs/cldma.c create mode 100644 sound/soc/intel/avs/cldma.h create mode 100644 sound/soc/intel/avs/core.c create mode 100644 sound/soc/intel/avs/dsp.c create mode 100644 sound/soc/intel/avs/ipc.c create mode 100644 sound/soc/intel/avs/loader.c create mode 100644 sound/soc/intel/avs/messages.c create mode 100644 sound/soc/intel/avs/messages.h create mode 100644 sound/soc/intel/avs/registers.h create mode 100644 sound/soc/intel/avs/utils.c -- 2.25.1

4 34

[PATCH] ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines
by Andy Chi 14 Mar '22

14 Mar '22

* The HP ProBook 440/450 and EliteBook 640/650 are using ALC236 codec which used 0x02 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by: Andy Chi <andy.chi(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c34b4888978b..4650ef9110d6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9017,6 +9017,10 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8992, "HP EliteBook 845 G9", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8994, "HP EliteBook 855 G9", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8995, "HP EliteBook 855 G9", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x103c, 0x89a4, "HP ProBook 440 G9", ALC236_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x89a6, "HP ProBook 450 G9", ALC236_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x89ac, "HP EliteBook 640 G9", ALC236_FIXUP_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x89ae, "HP EliteBook 650 G9", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x89c3, "Zbook Studio G9", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x89c6, "Zbook Fury 17 G9", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x103c, 0x89ca, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), -- 2.25.1

2 1

[PATCH v2 00/67] media: Kconfig/Makefile reorg
by Mauro Carvalho Chehab 14 Mar '22

14 Mar '22

I opted to join two series and one separate patch on a single series, as they're related and one depends on the others. That's the second version of it. It basically sorts the main media Makefile/Kconfig files and reorganizes drivers/media/platform building system. Now, the entries there are organized per-vendor, and each per-vendor directory under drivers/media/platform contains its own Kconfig/Makefile. It should be noticed that I opted to not sort the manufacturer's Kconfig files on this series by purpose. After this series, the per-vendor Kconfig menus have only a few drivers (up to ~10 config symbols). That makes it a lot more manageable than what we had before when almost every platform driver config entry were on a single file. My current understaning is that the driver maintainers knows best how to better organize their Kconfig files, considering that: - the per-vendor driver order may not be in alphabetical order, as it may make sense to group drivers per type, platform and/or by its dependency chain; - It is now easy to sort the per-vendor entries alphabetically, either per config title or per Kconfig symbol; - Now that the main sort criteria is per-vendor, IMO it makes sense to define a per-vendor config space, like: config VIDEO_VNDR_bar ... config VIDEO_VNDR_foo ... config VIDEO_VNDR_foobar ... Regards, Mauro v2: - ampion was moved out of nxp/; - STMicroelectronics has a new dir (stm) with two subdirectories on it (sti and stm32); - Mediatek's subdirectories were renamed; - The other media Kconfig main directories were sorted as well; - Simplified VIDEO_DEV dependencies at radio Kconfig; Mauro Carvalho Chehab (66): media: xc2028: rename the driver from tuner-xc2028 media: Makefiles: remove extra spaces media: Makefiles: sort entries where it fits media: platform: Makefile: reorganize its contents media: platform: move platform menu dependencies to drivers media: platform: place Aspeed driver on a separate dir media: platform: place NXP drivers on a separate dir media: platform: place Intel drivers on a separate dir media: platform: place Via drivers on a separate dir media: platform: place Renesas drivers on a separate dir media: platform: allegro-dvt: move config to its own file media: platform: amphion: move config to its own file media: platform: coda: move config to its own file media: platform: exynos-gsc: move config to its own file media: platform: ge2d: move config to its own file media: platform: mtk-jpeg: move config to its own file media: platform: mtk-mdp: move config to its own file media: platform: mtk-vcodec: move config to its own file media: platform: mtk-vpu: move config to its own file media: platform: omap3isp: move config to its own file media: platform: camss: move config to its own file media: platform: venus: move config to its own file media: platform: rga: move config to its own file media: platform: s3c-camif: move config to its own file media: platform: s5p-g2d: move config to its own file media: platform: hva: move config to its own file media: platform: stm32: move config to its own file media: platform: sun8i-di: move config to its own file media: platform: sun8i-rotate: move config to its own file media: platform: vde: move config to its own file media: platform: ti-vpe: move config to its own file media: platform: rkisp1: move config to its own file media: platform: delta: move config to its own file media: platform: bdisp: move config to its own file media: platform: s5p-mfc: move config to its own file media: platform: s5p-jpeg: move config to its own file media: platform: Kconfig: sort entries media: platform: move some manufacturer entries media: platform: Kconfig: place platform drivers on a submenu media: platform: rename coda/ to chips-media/ media: platform: rename marvell-ccic/ to marvell/ media: platform: rename meson/ge2d/ to amlogic/meson-ge2d/ media: platform: rename mtk-jpeg/ to mediatek/mtk-jpeg/ media: platform: rename mtk-mdp/ to mediatek/mtk-mdp/ media: platform: rename mtk-vcodec/ to mediatek/mtk-vcodec/ media: platform: rename mtk-vpu/ to mediatek/mtk-vpu/ media: platform: rename sunxi/ to allwinner/ media: platform: rename tegra/vde/ to nvidia/tegra-vde/ media: platform: rename exynos4-is/ to samsung/exynos4-is/ media: platform: rename exynos-gsc/ to samsung/exynos-gsc/ media: platform: rename s3c-camif/ to samsung/s3c-camif/ media: platform: rename s5p-g2d/ to samsung/s5p-g2d/ media: platform: rename s5p-jpeg/ to samsung/s5p-jpeg/ media: platform: rename s5p-mfc/ to samsung/s5p-mfc/ media: platform: rename stm32/ to stm/stm32/ media: platform: rename sti/ to stm/sti/ media: platform: rename am437x/ to ti/am437x/ media: platform: rename davinci/ to ti/davinci/ media: platform: rename omap3isp/ to ti/omap3isp/ media: platform: rename omap/ to ti/omap/ media: platform: ti/Kconfig: move VPE/CAL entries to it media: platform: Create vendor/{Makefile,Kconfig} files media: platform/*/Kconfig: make manufacturer menus more uniform media: Kconfig: cleanup VIDEO_DEV dependencies media: media/*/Kconfig: sort entries media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/ Pratyush Yadav (1): media: platform: re-structure TI drivers Documentation/admin-guide/media/fimc.rst | 2 +- .../admin-guide/media/i2c-cardlist.rst | 2 +- Documentation/admin-guide/media/omap3isp.rst | 2 +- .../admin-guide/media/omap4_camera.rst | 2 +- .../media/drivers/davinci-vpbe-devel.rst | 20 +- .../driver-api/media/drivers/fimc-devel.rst | 14 +- Documentation/driver-api/media/v4l2-event.rst | 2 +- MAINTAINERS | 79 +- drivers/input/rmi4/Kconfig | 2 +- drivers/input/touchscreen/Kconfig | 4 +- drivers/media/Kconfig | 11 +- drivers/media/Makefile | 4 +- drivers/media/cec/platform/Makefile | 16 +- drivers/media/common/Kconfig | 16 +- drivers/media/common/Makefile | 7 +- drivers/media/common/saa7146/Kconfig | 2 +- drivers/media/common/videobuf2/Makefile | 8 +- drivers/media/dvb-core/Kconfig | 2 +- drivers/media/dvb-frontends/Kconfig | 761 ++++++++-------- drivers/media/dvb-frontends/Makefile | 193 ++-- drivers/media/firewire/Makefile | 2 +- drivers/media/i2c/Kconfig | 832 +++++++++--------- drivers/media/i2c/Makefile | 192 ++-- drivers/media/i2c/ccs/Kconfig | 2 +- drivers/media/i2c/cx25840/Kconfig | 2 +- drivers/media/i2c/et8ek8/Kconfig | 2 +- drivers/media/i2c/m5mols/Kconfig | 2 +- drivers/media/mmc/Kconfig | 1 + drivers/media/pci/Kconfig | 31 +- drivers/media/pci/Makefile | 22 +- drivers/media/pci/bt8xx/Kconfig | 2 +- drivers/media/pci/cobalt/Kconfig | 2 +- drivers/media/pci/cx18/Kconfig | 2 +- drivers/media/pci/cx18/cx18-driver.c | 2 +- drivers/media/pci/cx18/cx18-dvb.c | 2 +- drivers/media/pci/cx18/cx18-gpio.c | 2 +- drivers/media/pci/cx23885/cx23885-cards.c | 2 +- drivers/media/pci/cx23885/cx23885-dvb.c | 2 +- drivers/media/pci/cx23885/cx23885-video.c | 2 +- drivers/media/pci/cx88/cx88.h | 2 +- drivers/media/pci/dt3155/Kconfig | 2 +- drivers/media/pci/intel/ipu3/Kconfig | 2 +- drivers/media/pci/ivtv/Kconfig | 2 +- drivers/media/pci/ivtv/ivtv-driver.c | 2 +- drivers/media/pci/ivtv/ivtv-gpio.c | 2 +- drivers/media/pci/meye/Kconfig | 2 +- drivers/media/pci/saa7134/saa7134-cards.c | 2 +- drivers/media/pci/saa7134/saa7134-dvb.c | 2 +- drivers/media/pci/saa7146/Kconfig | 6 +- drivers/media/pci/sta2x11/Kconfig | 2 +- drivers/media/pci/tw5864/Kconfig | 2 +- drivers/media/pci/tw68/Kconfig | 2 +- drivers/media/pci/tw686x/Kconfig | 2 +- drivers/media/platform/Kconfig | 741 ++-------------- drivers/media/platform/Makefile | 114 +-- drivers/media/platform/allegro-dvt/Kconfig | 19 + drivers/media/platform/allwinner/Kconfig | 6 + .../platform/{sunxi => allwinner}/Makefile | 0 .../{sunxi => allwinner}/sun4i-csi/Kconfig | 3 +- .../{sunxi => allwinner}/sun4i-csi/Makefile | 0 .../sun4i-csi/sun4i_csi.c | 0 .../sun4i-csi/sun4i_csi.h | 0 .../sun4i-csi/sun4i_dma.c | 0 .../sun4i-csi/sun4i_v4l2.c | 0 .../{sunxi => allwinner}/sun6i-csi/Kconfig | 3 +- .../{sunxi => allwinner}/sun6i-csi/Makefile | 0 .../sun6i-csi/sun6i_csi.c | 0 .../sun6i-csi/sun6i_csi.h | 0 .../sun6i-csi/sun6i_csi_reg.h | 0 .../sun6i-csi/sun6i_video.c | 0 .../sun6i-csi/sun6i_video.h | 0 .../media/platform/allwinner/sun8i-di/Kconfig | 14 + .../{sunxi => allwinner}/sun8i-di/Makefile | 0 .../{sunxi => allwinner}/sun8i-di/sun8i-di.c | 0 .../{sunxi => allwinner}/sun8i-di/sun8i-di.h | 0 .../platform/allwinner/sun8i-rotate/Kconfig | 14 + .../sun8i-rotate/Makefile | 0 .../sun8i-rotate/sun8i-formats.h | 0 .../sun8i-rotate/sun8i-rotate.h | 0 .../sun8i-rotate/sun8i_formats.c | 0 .../sun8i-rotate/sun8i_rotate.c | 0 drivers/media/platform/amlogic/Kconfig | 5 + drivers/media/platform/amlogic/Makefile | 2 + .../media/platform/amlogic/meson-ge2d/Kconfig | 14 + .../ge2d => amlogic/meson-ge2d}/Makefile | 0 .../ge2d => amlogic/meson-ge2d}/ge2d-regs.h | 0 .../{meson/ge2d => amlogic/meson-ge2d}/ge2d.c | 0 drivers/media/platform/amphion/Kconfig | 22 + drivers/media/platform/aspeed/Kconfig | 13 + drivers/media/platform/aspeed/Makefile | 2 + .../platform/{ => aspeed}/aspeed-video.c | 0 drivers/media/platform/atmel/Kconfig | 15 +- drivers/media/platform/cadence/Kconfig | 16 +- drivers/media/platform/chips-media/Kconfig | 20 + .../platform/{coda => chips-media}/Makefile | 0 .../platform/{coda => chips-media}/coda-bit.c | 0 .../{coda => chips-media}/coda-common.c | 0 .../platform/{coda => chips-media}/coda-gdi.c | 0 .../{coda => chips-media}/coda-h264.c | 0 .../{coda => chips-media}/coda-jpeg.c | 0 .../{coda => chips-media}/coda-mpeg2.c | 0 .../{coda => chips-media}/coda-mpeg4.c | 0 .../platform/{coda => chips-media}/coda.h | 0 .../{coda => chips-media}/coda_regs.h | 2 +- .../platform/{coda => chips-media}/imx-vdoa.c | 0 .../platform/{coda => chips-media}/imx-vdoa.h | 0 .../platform/{coda => chips-media}/trace.h | 2 +- drivers/media/platform/imx/Kconfig | 24 - drivers/media/platform/imx/Makefile | 1 - drivers/media/platform/intel/Kconfig | 14 + drivers/media/platform/intel/Makefile | 2 + .../media/platform/{ => intel}/pxa_camera.c | 0 .../{marvell-ccic => marvell}/Kconfig | 9 +- .../{marvell-ccic => marvell}/Makefile | 0 .../{marvell-ccic => marvell}/cafe-driver.c | 0 .../{marvell-ccic => marvell}/mcam-core.c | 0 .../{marvell-ccic => marvell}/mcam-core.h | 0 .../{marvell-ccic => marvell}/mmp-driver.c | 0 drivers/media/platform/mediatek/Kconfig | 8 + drivers/media/platform/mediatek/Makefile | 5 + drivers/media/platform/mediatek/jpeg/Kconfig | 16 + .../{mtk-jpeg => mediatek/jpeg}/Makefile | 0 .../jpeg}/mtk_jpeg_core.c | 0 .../jpeg}/mtk_jpeg_core.h | 0 .../jpeg}/mtk_jpeg_dec_hw.c | 0 .../jpeg}/mtk_jpeg_dec_hw.h | 0 .../jpeg}/mtk_jpeg_dec_parse.c | 0 .../jpeg}/mtk_jpeg_dec_parse.h | 0 .../jpeg}/mtk_jpeg_dec_reg.h | 0 .../jpeg}/mtk_jpeg_enc_hw.c | 0 .../jpeg}/mtk_jpeg_enc_hw.h | 0 drivers/media/platform/mediatek/mdp/Kconfig | 17 + .../{mtk-mdp => mediatek/mdp}/Makefile | 2 +- .../{mtk-mdp => mediatek/mdp}/mtk_mdp_comp.c | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_comp.h | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_core.c | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_core.h | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_ipi.h | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_m2m.c | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_m2m.h | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_regs.c | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_regs.h | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_vpu.c | 0 .../{mtk-mdp => mediatek/mdp}/mtk_mdp_vpu.h | 0 .../media/platform/mediatek/vcodec/Kconfig | 36 + .../{mtk-vcodec => mediatek/vcodec}/Makefile | 0 .../vcodec}/mtk_vcodec_dec.c | 0 .../vcodec}/mtk_vcodec_dec.h | 0 .../vcodec}/mtk_vcodec_dec_drv.c | 0 .../vcodec}/mtk_vcodec_dec_hw.c | 0 .../vcodec}/mtk_vcodec_dec_hw.h | 0 .../vcodec}/mtk_vcodec_dec_pm.c | 0 .../vcodec}/mtk_vcodec_dec_pm.h | 0 .../vcodec}/mtk_vcodec_dec_stateful.c | 0 .../vcodec}/mtk_vcodec_dec_stateless.c | 0 .../vcodec}/mtk_vcodec_drv.h | 0 .../vcodec}/mtk_vcodec_enc.c | 0 .../vcodec}/mtk_vcodec_enc.h | 0 .../vcodec}/mtk_vcodec_enc_drv.c | 0 .../vcodec}/mtk_vcodec_enc_pm.c | 0 .../vcodec}/mtk_vcodec_enc_pm.h | 0 .../vcodec}/mtk_vcodec_fw.c | 0 .../vcodec}/mtk_vcodec_fw.h | 2 +- .../vcodec}/mtk_vcodec_fw_priv.h | 0 .../vcodec}/mtk_vcodec_fw_scp.c | 0 .../vcodec}/mtk_vcodec_fw_vpu.c | 0 .../vcodec}/mtk_vcodec_intr.c | 0 .../vcodec}/mtk_vcodec_intr.h | 0 .../vcodec}/mtk_vcodec_util.c | 0 .../vcodec}/mtk_vcodec_util.h | 0 .../vcodec}/vdec/vdec_h264_if.c | 0 .../vcodec}/vdec/vdec_h264_req_if.c | 0 .../vcodec}/vdec/vdec_vp8_if.c | 0 .../vcodec}/vdec/vdec_vp9_if.c | 0 .../vcodec}/vdec_drv_base.h | 0 .../vcodec}/vdec_drv_if.c | 0 .../vcodec}/vdec_drv_if.h | 0 .../vcodec}/vdec_ipi_msg.h | 0 .../vcodec}/vdec_msg_queue.c | 0 .../vcodec}/vdec_msg_queue.h | 0 .../vcodec}/vdec_vpu_if.c | 0 .../vcodec}/vdec_vpu_if.h | 0 .../vcodec}/venc/venc_h264_if.c | 0 .../vcodec}/venc/venc_vp8_if.c | 0 .../vcodec}/venc_drv_base.h | 0 .../vcodec}/venc_drv_if.c | 0 .../vcodec}/venc_drv_if.h | 0 .../vcodec}/venc_ipi_msg.h | 0 .../vcodec}/venc_vpu_if.c | 0 .../vcodec}/venc_vpu_if.h | 0 drivers/media/platform/mediatek/vpu/Kconfig | 15 + .../{mtk-vpu => mediatek/vpu}/Makefile | 0 .../{mtk-vpu => mediatek/vpu}/mtk_vpu.c | 0 .../{mtk-vpu => mediatek/vpu}/mtk_vpu.h | 0 drivers/media/platform/nvidia/Kconfig | 5 + drivers/media/platform/nvidia/Makefile | 3 + .../media/platform/nvidia/tegra-vde/Kconfig | 17 + .../{tegra/vde => nvidia/tegra-vde}/Makefile | 0 .../vde => nvidia/tegra-vde}/dmabuf-cache.c | 0 .../{tegra/vde => nvidia/tegra-vde}/h264.c | 0 .../{tegra/vde => nvidia/tegra-vde}/iommu.c | 0 .../{tegra/vde => nvidia/tegra-vde}/trace.h | 2 +- .../{tegra/vde => nvidia/tegra-vde}/v4l2.c | 0 .../{tegra/vde => nvidia/tegra-vde}/vde.c | 0 .../{tegra/vde => nvidia/tegra-vde}/vde.h | 0 drivers/media/platform/nxp/Kconfig | 54 ++ drivers/media/platform/nxp/Makefile | 8 + drivers/media/platform/{ => nxp}/fsl-viu.c | 0 .../media/platform/{ => nxp}/imx-jpeg/Kconfig | 3 +- .../platform/{ => nxp}/imx-jpeg/Makefile | 0 .../platform/{ => nxp}/imx-jpeg/mxc-jpeg-hw.c | 0 .../platform/{ => nxp}/imx-jpeg/mxc-jpeg-hw.h | 0 .../platform/{ => nxp}/imx-jpeg/mxc-jpeg.c | 2 +- .../platform/{ => nxp}/imx-jpeg/mxc-jpeg.h | 0 .../platform/{imx => nxp}/imx-mipi-csis.c | 0 drivers/media/platform/{ => nxp}/imx-pxp.c | 0 drivers/media/platform/{ => nxp}/imx-pxp.h | 0 .../media/platform/{ => nxp}/mx2_emmaprp.c | 0 drivers/media/platform/qcom/Kconfig | 6 + drivers/media/platform/qcom/Makefile | 3 + drivers/media/platform/qcom/camss/Kconfig | 9 + drivers/media/platform/qcom/venus/Kconfig | 14 + drivers/media/platform/renesas/Kconfig | 121 +++ drivers/media/platform/renesas/Makefile | 15 + .../media/platform/{ => renesas}/rcar-fcp.c | 0 .../media/platform/{ => renesas}/rcar-isp.c | 0 .../platform/{ => renesas}/rcar-vin/Kconfig | 6 +- .../platform/{ => renesas}/rcar-vin/Makefile | 0 .../{ => renesas}/rcar-vin/rcar-core.c | 0 .../{ => renesas}/rcar-vin/rcar-csi2.c | 0 .../{ => renesas}/rcar-vin/rcar-dma.c | 0 .../{ => renesas}/rcar-vin/rcar-v4l2.c | 0 .../{ => renesas}/rcar-vin/rcar-vin.h | 0 .../media/platform/{ => renesas}/rcar_drif.c | 0 .../media/platform/{ => renesas}/rcar_fdp1.c | 0 .../media/platform/{ => renesas}/rcar_jpu.c | 2 +- .../platform/{ => renesas}/renesas-ceu.c | 0 drivers/media/platform/{ => renesas}/sh_vou.c | 0 .../platform/{ => renesas}/vsp1/Makefile | 0 .../media/platform/{ => renesas}/vsp1/vsp1.h | 0 .../platform/{ => renesas}/vsp1/vsp1_brx.c | 0 .../platform/{ => renesas}/vsp1/vsp1_brx.h | 0 .../platform/{ => renesas}/vsp1/vsp1_clu.c | 0 .../platform/{ => renesas}/vsp1/vsp1_clu.h | 0 .../platform/{ => renesas}/vsp1/vsp1_dl.c | 0 .../platform/{ => renesas}/vsp1/vsp1_dl.h | 0 .../platform/{ => renesas}/vsp1/vsp1_drm.c | 0 .../platform/{ => renesas}/vsp1/vsp1_drm.h | 0 .../platform/{ => renesas}/vsp1/vsp1_drv.c | 0 .../platform/{ => renesas}/vsp1/vsp1_entity.c | 0 .../platform/{ => renesas}/vsp1/vsp1_entity.h | 0 .../platform/{ => renesas}/vsp1/vsp1_hgo.c | 0 .../platform/{ => renesas}/vsp1/vsp1_hgo.h | 0 .../platform/{ => renesas}/vsp1/vsp1_hgt.c | 0 .../platform/{ => renesas}/vsp1/vsp1_hgt.h | 0 .../platform/{ => renesas}/vsp1/vsp1_histo.c | 0 .../platform/{ => renesas}/vsp1/vsp1_histo.h | 0 .../platform/{ => renesas}/vsp1/vsp1_hsit.c | 0 .../platform/{ => renesas}/vsp1/vsp1_hsit.h | 0 .../platform/{ => renesas}/vsp1/vsp1_lif.c | 0 .../platform/{ => renesas}/vsp1/vsp1_lif.h | 0 .../platform/{ => renesas}/vsp1/vsp1_lut.c | 0 .../platform/{ => renesas}/vsp1/vsp1_lut.h | 0 .../platform/{ => renesas}/vsp1/vsp1_pipe.c | 0 .../platform/{ => renesas}/vsp1/vsp1_pipe.h | 0 .../platform/{ => renesas}/vsp1/vsp1_regs.h | 0 .../platform/{ => renesas}/vsp1/vsp1_rpf.c | 0 .../platform/{ => renesas}/vsp1/vsp1_rwpf.c | 0 .../platform/{ => renesas}/vsp1/vsp1_rwpf.h | 0 .../platform/{ => renesas}/vsp1/vsp1_sru.c | 0 .../platform/{ => renesas}/vsp1/vsp1_sru.h | 0 .../platform/{ => renesas}/vsp1/vsp1_uds.c | 0 .../platform/{ => renesas}/vsp1/vsp1_uds.h | 0 .../platform/{ => renesas}/vsp1/vsp1_uif.c | 0 .../platform/{ => renesas}/vsp1/vsp1_uif.h | 0 .../platform/{ => renesas}/vsp1/vsp1_video.c | 0 .../platform/{ => renesas}/vsp1/vsp1_video.h | 0 .../platform/{ => renesas}/vsp1/vsp1_wpf.c | 0 drivers/media/platform/rockchip/Kconfig | 6 + drivers/media/platform/rockchip/Makefile | 3 + drivers/media/platform/rockchip/rga/Kconfig | 14 + .../media/platform/rockchip/rkisp1/Kconfig | 19 + drivers/media/platform/samsung/Kconfig | 10 + drivers/media/platform/samsung/Makefile | 7 + .../media/platform/samsung/exynos-gsc/Kconfig | 10 + .../{ => samsung}/exynos-gsc/Makefile | 0 .../{ => samsung}/exynos-gsc/gsc-core.c | 0 .../{ => samsung}/exynos-gsc/gsc-core.h | 0 .../{ => samsung}/exynos-gsc/gsc-m2m.c | 0 .../{ => samsung}/exynos-gsc/gsc-regs.c | 0 .../{ => samsung}/exynos-gsc/gsc-regs.h | 0 .../platform/{ => samsung}/exynos4-is/Kconfig | 3 +- .../{ => samsung}/exynos4-is/Makefile | 0 .../{ => samsung}/exynos4-is/common.c | 0 .../{ => samsung}/exynos4-is/common.h | 0 .../{ => samsung}/exynos4-is/fimc-capture.c | 0 .../{ => samsung}/exynos4-is/fimc-core.c | 0 .../{ => samsung}/exynos4-is/fimc-core.h | 0 .../exynos4-is/fimc-is-command.h | 0 .../{ => samsung}/exynos4-is/fimc-is-errno.c | 0 .../{ => samsung}/exynos4-is/fimc-is-errno.h | 0 .../{ => samsung}/exynos4-is/fimc-is-i2c.c | 0 .../{ => samsung}/exynos4-is/fimc-is-i2c.h | 0 .../{ => samsung}/exynos4-is/fimc-is-param.c | 0 .../{ => samsung}/exynos4-is/fimc-is-param.h | 0 .../{ => samsung}/exynos4-is/fimc-is-regs.c | 0 .../{ => samsung}/exynos4-is/fimc-is-regs.h | 0 .../{ => samsung}/exynos4-is/fimc-is-sensor.c | 0 .../{ => samsung}/exynos4-is/fimc-is-sensor.h | 0 .../{ => samsung}/exynos4-is/fimc-is.c | 0 .../{ => samsung}/exynos4-is/fimc-is.h | 0 .../{ => samsung}/exynos4-is/fimc-isp-video.c | 0 .../{ => samsung}/exynos4-is/fimc-isp-video.h | 0 .../{ => samsung}/exynos4-is/fimc-isp.c | 0 .../{ => samsung}/exynos4-is/fimc-isp.h | 0 .../{ => samsung}/exynos4-is/fimc-lite-reg.c | 0 .../{ => samsung}/exynos4-is/fimc-lite-reg.h | 0 .../{ => samsung}/exynos4-is/fimc-lite.c | 0 .../{ => samsung}/exynos4-is/fimc-lite.h | 0 .../{ => samsung}/exynos4-is/fimc-m2m.c | 0 .../{ => samsung}/exynos4-is/fimc-reg.c | 0 .../{ => samsung}/exynos4-is/fimc-reg.h | 0 .../{ => samsung}/exynos4-is/media-dev.c | 0 .../{ => samsung}/exynos4-is/media-dev.h | 0 .../{ => samsung}/exynos4-is/mipi-csis.c | 0 .../{ => samsung}/exynos4-is/mipi-csis.h | 0 .../media/platform/samsung/s3c-camif/Kconfig | 15 + .../platform/{ => samsung}/s3c-camif/Makefile | 0 .../{ => samsung}/s3c-camif/camif-capture.c | 0 .../{ => samsung}/s3c-camif/camif-core.c | 0 .../{ => samsung}/s3c-camif/camif-core.h | 0 .../{ => samsung}/s3c-camif/camif-regs.c | 0 .../{ => samsung}/s3c-camif/camif-regs.h | 0 .../media/platform/samsung/s5p-g2d/Kconfig | 11 + .../platform/{ => samsung}/s5p-g2d/Makefile | 0 .../platform/{ => samsung}/s5p-g2d/g2d-hw.c | 0 .../platform/{ => samsung}/s5p-g2d/g2d-regs.h | 0 .../platform/{ => samsung}/s5p-g2d/g2d.c | 0 .../platform/{ => samsung}/s5p-g2d/g2d.h | 0 .../media/platform/samsung/s5p-jpeg/Kconfig | 12 + .../platform/{ => samsung}/s5p-jpeg/Makefile | 0 .../{ => samsung}/s5p-jpeg/jpeg-core.c | 2 +- .../{ => samsung}/s5p-jpeg/jpeg-core.h | 2 +- .../s5p-jpeg/jpeg-hw-exynos3250.c | 0 .../s5p-jpeg/jpeg-hw-exynos3250.h | 2 +- .../{ => samsung}/s5p-jpeg/jpeg-hw-exynos4.c | 0 .../{ => samsung}/s5p-jpeg/jpeg-hw-exynos4.h | 0 .../{ => samsung}/s5p-jpeg/jpeg-hw-s5p.c | 2 +- .../{ => samsung}/s5p-jpeg/jpeg-hw-s5p.h | 2 +- .../{ => samsung}/s5p-jpeg/jpeg-regs.h | 2 +- .../media/platform/samsung/s5p-mfc/Kconfig | 9 + .../platform/{ => samsung}/s5p-mfc/Makefile | 0 .../{ => samsung}/s5p-mfc/regs-mfc-v10.h | 0 .../{ => samsung}/s5p-mfc/regs-mfc-v6.h | 0 .../{ => samsung}/s5p-mfc/regs-mfc-v7.h | 0 .../{ => samsung}/s5p-mfc/regs-mfc-v8.h | 0 .../platform/{ => samsung}/s5p-mfc/regs-mfc.h | 0 .../platform/{ => samsung}/s5p-mfc/s5p_mfc.c | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_cmd.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd_v5.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd_v5.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd_v6.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_cmd_v6.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_common.h | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_ctrl.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_ctrl.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_debug.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_dec.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_dec.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_enc.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_enc.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_intr.c | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_intr.h | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_iommu.h | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_opr.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_opr.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_opr_v5.c | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_opr_v5.h | 0 .../{ => samsung}/s5p-mfc/s5p_mfc_opr_v6.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_opr_v6.h | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_pm.c | 2 +- .../{ => samsung}/s5p-mfc/s5p_mfc_pm.h | 2 +- drivers/media/platform/stm/Kconfig | 6 + drivers/media/platform/stm/Makefile | 7 + drivers/media/platform/stm/sti/Kconfig | 5 + drivers/media/platform/stm/sti/Makefile | 6 + drivers/media/platform/stm/sti/bdisp/Kconfig | 10 + .../platform/{ => stm}/sti/bdisp/Makefile | 0 .../{ => stm}/sti/bdisp/bdisp-debug.c | 0 .../{ => stm}/sti/bdisp/bdisp-filter.h | 0 .../platform/{ => stm}/sti/bdisp/bdisp-hw.c | 0 .../platform/{ => stm}/sti/bdisp/bdisp-reg.h | 0 .../platform/{ => stm}/sti/bdisp/bdisp-v4l2.c | 0 .../platform/{ => stm}/sti/bdisp/bdisp.h | 0 .../platform/{ => stm}/sti/c8sectpfe/Kconfig | 1 + .../platform/{ => stm}/sti/c8sectpfe/Makefile | 0 .../sti/c8sectpfe/c8sectpfe-common.c | 0 .../sti/c8sectpfe/c8sectpfe-common.h | 0 .../{ => stm}/sti/c8sectpfe/c8sectpfe-core.c | 0 .../{ => stm}/sti/c8sectpfe/c8sectpfe-core.h | 0 .../sti/c8sectpfe/c8sectpfe-debugfs.c | 0 .../sti/c8sectpfe/c8sectpfe-debugfs.h | 0 .../{ => stm}/sti/c8sectpfe/c8sectpfe-dvb.c | 0 .../{ => stm}/sti/c8sectpfe/c8sectpfe-dvb.h | 0 drivers/media/platform/stm/sti/delta/Kconfig | 36 + .../platform/{ => stm}/sti/delta/Makefile | 0 .../platform/{ => stm}/sti/delta/delta-cfg.h | 0 .../{ => stm}/sti/delta/delta-debug.c | 0 .../{ => stm}/sti/delta/delta-debug.h | 0 .../platform/{ => stm}/sti/delta/delta-ipc.c | 0 .../platform/{ => stm}/sti/delta/delta-ipc.h | 0 .../platform/{ => stm}/sti/delta/delta-mem.c | 0 .../platform/{ => stm}/sti/delta/delta-mem.h | 0 .../{ => stm}/sti/delta/delta-mjpeg-dec.c | 0 .../{ => stm}/sti/delta/delta-mjpeg-fw.h | 0 .../{ => stm}/sti/delta/delta-mjpeg-hdr.c | 0 .../{ => stm}/sti/delta/delta-mjpeg.h | 0 .../platform/{ => stm}/sti/delta/delta-v4l2.c | 0 .../platform/{ => stm}/sti/delta/delta.h | 0 drivers/media/platform/stm/sti/hva/Kconfig | 26 + .../media/platform/{ => stm}/sti/hva/Makefile | 0 .../platform/{ => stm}/sti/hva/hva-debugfs.c | 0 .../platform/{ => stm}/sti/hva/hva-h264.c | 0 .../media/platform/{ => stm}/sti/hva/hva-hw.c | 0 .../media/platform/{ => stm}/sti/hva/hva-hw.h | 0 .../platform/{ => stm}/sti/hva/hva-mem.c | 0 .../platform/{ => stm}/sti/hva/hva-mem.h | 0 .../platform/{ => stm}/sti/hva/hva-v4l2.c | 0 .../media/platform/{ => stm}/sti/hva/hva.h | 0 drivers/media/platform/stm/stm32/Kconfig | 31 + .../media/platform/{ => stm}/stm32/Makefile | 0 .../platform/{ => stm}/stm32/dma2d/dma2d-hw.c | 0 .../{ => stm}/stm32/dma2d/dma2d-regs.h | 0 .../platform/{ => stm}/stm32/dma2d/dma2d.c | 0 .../platform/{ => stm}/stm32/dma2d/dma2d.h | 0 .../platform/{ => stm}/stm32/stm32-dcmi.c | 0 drivers/media/platform/sunxi/Kconfig | 4 - drivers/media/platform/ti/Kconfig | 69 ++ drivers/media/platform/ti/Makefile | 7 + .../media/platform/{ => ti}/am437x/Kconfig | 3 +- .../media/platform/{ => ti}/am437x/Makefile | 0 .../platform/{ => ti}/am437x/am437x-vpfe.c | 0 .../platform/{ => ti}/am437x/am437x-vpfe.h | 0 .../{ => ti}/am437x/am437x-vpfe_regs.h | 0 drivers/media/platform/ti/cal/Makefile | 3 + .../{ti-vpe => ti/cal}/cal-camerarx.c | 0 .../platform/{ti-vpe => ti/cal}/cal-video.c | 0 .../media/platform/{ti-vpe => ti/cal}/cal.c | 0 .../media/platform/{ti-vpe => ti/cal}/cal.h | 0 .../platform/{ti-vpe => ti/cal}/cal_regs.h | 0 .../media/platform/{ => ti}/davinci/Kconfig | 18 +- .../media/platform/{ => ti}/davinci/Makefile | 0 .../{ => ti}/davinci/ccdc_hw_device.h | 0 .../platform/{ => ti}/davinci/dm355_ccdc.c | 0 .../{ => ti}/davinci/dm355_ccdc_regs.h | 0 .../platform/{ => ti}/davinci/dm644x_ccdc.c | 0 .../{ => ti}/davinci/dm644x_ccdc_regs.h | 0 .../media/platform/{ => ti}/davinci/isif.c | 0 .../platform/{ => ti}/davinci/isif_regs.h | 0 .../media/platform/{ => ti}/davinci/vpbe.c | 0 .../platform/{ => ti}/davinci/vpbe_display.c | 0 .../platform/{ => ti}/davinci/vpbe_osd.c | 0 .../platform/{ => ti}/davinci/vpbe_osd_regs.h | 0 .../platform/{ => ti}/davinci/vpbe_venc.c | 0 .../{ => ti}/davinci/vpbe_venc_regs.h | 0 .../platform/{ => ti}/davinci/vpfe_capture.c | 0 .../media/platform/{ => ti}/davinci/vpif.c | 0 .../media/platform/{ => ti}/davinci/vpif.h | 0 .../platform/{ => ti}/davinci/vpif_capture.c | 0 .../platform/{ => ti}/davinci/vpif_capture.h | 0 .../platform/{ => ti}/davinci/vpif_display.c | 0 .../platform/{ => ti}/davinci/vpif_display.h | 0 .../media/platform/{ => ti}/davinci/vpss.c | 0 drivers/media/platform/{ => ti}/omap/Kconfig | 3 +- drivers/media/platform/{ => ti}/omap/Makefile | 0 .../media/platform/{ => ti}/omap/omap_vout.c | 0 .../platform/{ => ti}/omap/omap_vout_vrfb.c | 0 .../platform/{ => ti}/omap/omap_vout_vrfb.h | 0 .../platform/{ => ti}/omap/omap_voutdef.h | 0 .../platform/{ => ti}/omap/omap_voutlib.c | 0 .../platform/{ => ti}/omap/omap_voutlib.h | 0 drivers/media/platform/ti/omap3isp/Kconfig | 21 + .../media/platform/{ => ti}/omap3isp/Makefile | 0 .../{ => ti}/omap3isp/cfa_coef_table.h | 0 .../platform/{ => ti}/omap3isp/gamma_table.h | 0 .../media/platform/{ => ti}/omap3isp/isp.c | 0 .../media/platform/{ => ti}/omap3isp/isp.h | 0 .../platform/{ => ti}/omap3isp/ispccdc.c | 0 .../platform/{ => ti}/omap3isp/ispccdc.h | 0 .../platform/{ => ti}/omap3isp/ispccp2.c | 0 .../platform/{ => ti}/omap3isp/ispccp2.h | 0 .../platform/{ => ti}/omap3isp/ispcsi2.c | 0 .../platform/{ => ti}/omap3isp/ispcsi2.h | 0 .../platform/{ => ti}/omap3isp/ispcsiphy.c | 0 .../platform/{ => ti}/omap3isp/ispcsiphy.h | 0 .../media/platform/{ => ti}/omap3isp/isph3a.h | 0 .../platform/{ => ti}/omap3isp/isph3a_aewb.c | 0 .../platform/{ => ti}/omap3isp/isph3a_af.c | 0 .../platform/{ => ti}/omap3isp/isphist.c | 0 .../platform/{ => ti}/omap3isp/isphist.h | 0 .../platform/{ => ti}/omap3isp/isppreview.c | 0 .../platform/{ => ti}/omap3isp/isppreview.h | 0 .../media/platform/{ => ti}/omap3isp/ispreg.h | 0 .../platform/{ => ti}/omap3isp/ispresizer.c | 0 .../platform/{ => ti}/omap3isp/ispresizer.h | 0 .../platform/{ => ti}/omap3isp/ispstat.c | 0 .../platform/{ => ti}/omap3isp/ispstat.h | 0 .../platform/{ => ti}/omap3isp/ispvideo.c | 0 .../platform/{ => ti}/omap3isp/ispvideo.h | 0 .../{ => ti}/omap3isp/luma_enhance_table.h | 0 .../{ => ti}/omap3isp/noise_filter_table.h | 0 .../platform/{ => ti}/omap3isp/omap3isp.h | 0 .../platform/{ti-vpe => ti/vpe}/Makefile | 4 - .../media/platform/{ti-vpe => ti/vpe}/csc.c | 0 .../media/platform/{ti-vpe => ti/vpe}/csc.h | 0 .../media/platform/{ti-vpe => ti/vpe}/sc.c | 0 .../media/platform/{ti-vpe => ti/vpe}/sc.h | 0 .../platform/{ti-vpe => ti/vpe}/sc_coeff.h | 0 .../media/platform/{ti-vpe => ti/vpe}/vpdma.c | 0 .../media/platform/{ti-vpe => ti/vpe}/vpdma.h | 0 .../platform/{ti-vpe => ti/vpe}/vpdma_priv.h | 0 .../media/platform/{ti-vpe => ti/vpe}/vpe.c | 0 .../platform/{ti-vpe => ti/vpe}/vpe_regs.h | 0 drivers/media/platform/via/Kconfig | 14 + drivers/media/platform/via/Makefile | 2 + drivers/media/platform/{ => via}/via-camera.c | 0 drivers/media/platform/{ => via}/via-camera.h | 0 drivers/media/platform/xilinx/Kconfig | 10 +- drivers/media/radio/Kconfig | 362 ++++---- drivers/media/radio/Makefile | 43 +- drivers/media/radio/si470x/Kconfig | 2 +- drivers/media/radio/wl128x/Kconfig | 2 +- drivers/media/rc/Kconfig | 382 ++++---- drivers/media/rc/Makefile | 47 +- drivers/media/rc/keymaps/Makefile | 34 +- drivers/media/spi/Kconfig | 4 +- drivers/media/spi/Makefile | 7 +- drivers/media/test-drivers/Kconfig | 8 +- drivers/media/test-drivers/Makefile | 14 +- drivers/media/test-drivers/vicodec/Kconfig | 2 +- drivers/media/test-drivers/vidtv/Kconfig | 1 - drivers/media/test-drivers/vimc/Kconfig | 2 +- drivers/media/test-drivers/vivid/Kconfig | 2 +- drivers/media/tuners/Kconfig | 407 ++++----- drivers/media/tuners/Makefile | 66 +- drivers/media/tuners/e4000.c | 6 +- drivers/media/tuners/fc2580.c | 6 +- drivers/media/tuners/tuner-types.c | 2 +- .../{tuner-xc2028-types.h => xc2028-types.h} | 6 +- .../media/tuners/{tuner-xc2028.c => xc2028.c} | 6 +- .../media/tuners/{tuner-xc2028.h => xc2028.h} | 2 +- drivers/media/tuners/xc4000.c | 2 +- drivers/media/usb/Kconfig | 33 +- drivers/media/usb/Makefile | 40 +- drivers/media/usb/airspy/Kconfig | 2 +- drivers/media/usb/au0828/Kconfig | 6 +- drivers/media/usb/cpia2/Kconfig | 2 +- drivers/media/usb/dvb-usb-v2/Kconfig | 34 +- drivers/media/usb/dvb-usb/Kconfig | 392 +++++---- drivers/media/usb/dvb-usb/cxusb.c | 2 +- drivers/media/usb/dvb-usb/dib0700_devices.c | 2 +- drivers/media/usb/em28xx/em28xx-i2c.c | 2 +- drivers/media/usb/em28xx/em28xx.h | 2 +- drivers/media/usb/gspca/Kconfig | 121 ++- drivers/media/usb/gspca/Makefile | 88 +- drivers/media/usb/gspca/gl860/Kconfig | 2 +- drivers/media/usb/gspca/m5602/Kconfig | 2 +- drivers/media/usb/hackrf/Kconfig | 2 +- drivers/media/usb/hdpvr/Kconfig | 2 +- drivers/media/usb/msi2500/Kconfig | 2 +- drivers/media/usb/pvrusb2/Kconfig | 2 +- drivers/media/usb/pwc/Kconfig | 2 +- drivers/media/usb/s2255/Kconfig | 2 +- drivers/media/usb/stkwebcam/Kconfig | 2 +- drivers/media/usb/tm6000/tm6000-cards.c | 2 +- drivers/media/usb/tm6000/tm6000-dvb.c | 2 +- drivers/media/usb/tm6000/tm6000-i2c.c | 2 +- drivers/media/usb/usbtv/Kconfig | 2 +- drivers/media/usb/uvc/Kconfig | 2 +- drivers/media/usb/zr364xx/Kconfig | 2 +- drivers/media/v4l2-core/Kconfig | 12 +- drivers/media/v4l2-core/Makefile | 34 +- drivers/media/v4l2-core/tuner-core.c | 2 +- drivers/staging/media/atomisp/Kconfig | 2 +- drivers/staging/media/atomisp/i2c/Kconfig | 14 +- drivers/staging/media/hantro/Kconfig | 2 +- drivers/staging/media/imx/Kconfig | 2 +- drivers/staging/media/ipu3/Kconfig | 2 +- drivers/staging/media/max96712/Kconfig | 2 +- drivers/staging/media/meson/vdec/Kconfig | 2 +- drivers/staging/media/omap4iss/Kconfig | 2 +- drivers/staging/media/rkvdec/Kconfig | 2 +- drivers/staging/media/sunxi/cedrus/Kconfig | 2 +- drivers/staging/media/tegra-video/Kconfig | 2 +- drivers/staging/media/zoran/Kconfig | 2 +- drivers/staging/most/video/Kconfig | 2 +- .../vc04_services/bcm2835-camera/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 2 +- drivers/usb/gadget/legacy/Kconfig | 2 +- sound/pci/Kconfig | 4 +- 601 files changed, 3334 insertions(+), 3123 deletions(-) create mode 100644 drivers/media/platform/allegro-dvt/Kconfig create mode 100644 drivers/media/platform/allwinner/Kconfig rename drivers/media/platform/{sunxi => allwinner}/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/Kconfig (83%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/sun4i_csi.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/sun4i_csi.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/sun4i_dma.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun4i-csi/sun4i_v4l2.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/Kconfig (81%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_csi.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_csi.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_csi_reg.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_video.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun6i-csi/sun6i_video.h (100%) create mode 100644 drivers/media/platform/allwinner/sun8i-di/Kconfig rename drivers/media/platform/{sunxi => allwinner}/sun8i-di/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-di/sun8i-di.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-di/sun8i-di.h (100%) create mode 100644 drivers/media/platform/allwinner/sun8i-rotate/Kconfig rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/Makefile (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/sun8i-formats.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/sun8i-rotate.h (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/sun8i_formats.c (100%) rename drivers/media/platform/{sunxi => allwinner}/sun8i-rotate/sun8i_rotate.c (100%) create mode 100644 drivers/media/platform/amlogic/Kconfig create mode 100644 drivers/media/platform/amlogic/Makefile create mode 100644 drivers/media/platform/amlogic/meson-ge2d/Kconfig rename drivers/media/platform/{meson/ge2d => amlogic/meson-ge2d}/Makefile (100%) rename drivers/media/platform/{meson/ge2d => amlogic/meson-ge2d}/ge2d-regs.h (100%) rename drivers/media/platform/{meson/ge2d => amlogic/meson-ge2d}/ge2d.c (100%) create mode 100644 drivers/media/platform/amphion/Kconfig create mode 100644 drivers/media/platform/aspeed/Kconfig create mode 100644 drivers/media/platform/aspeed/Makefile rename drivers/media/platform/{ => aspeed}/aspeed-video.c (100%) create mode 100644 drivers/media/platform/chips-media/Kconfig rename drivers/media/platform/{coda => chips-media}/Makefile (100%) rename drivers/media/platform/{coda => chips-media}/coda-bit.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-common.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-gdi.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-h264.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-jpeg.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-mpeg2.c (100%) rename drivers/media/platform/{coda => chips-media}/coda-mpeg4.c (100%) rename drivers/media/platform/{coda => chips-media}/coda.h (100%) rename drivers/media/platform/{coda => chips-media}/coda_regs.h (99%) rename drivers/media/platform/{coda => chips-media}/imx-vdoa.c (100%) rename drivers/media/platform/{coda => chips-media}/imx-vdoa.h (100%) rename drivers/media/platform/{coda => chips-media}/trace.h (98%) delete mode 100644 drivers/media/platform/imx/Kconfig delete mode 100644 drivers/media/platform/imx/Makefile create mode 100644 drivers/media/platform/intel/Kconfig create mode 100644 drivers/media/platform/intel/Makefile rename drivers/media/platform/{ => intel}/pxa_camera.c (100%) rename drivers/media/platform/{marvell-ccic => marvell}/Kconfig (85%) rename drivers/media/platform/{marvell-ccic => marvell}/Makefile (100%) rename drivers/media/platform/{marvell-ccic => marvell}/cafe-driver.c (100%) rename drivers/media/platform/{marvell-ccic => marvell}/mcam-core.c (100%) rename drivers/media/platform/{marvell-ccic => marvell}/mcam-core.h (100%) rename drivers/media/platform/{marvell-ccic => marvell}/mmp-driver.c (100%) create mode 100644 drivers/media/platform/mediatek/Kconfig create mode 100644 drivers/media/platform/mediatek/Makefile create mode 100644 drivers/media/platform/mediatek/jpeg/Kconfig rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/Makefile (100%) rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/mtk_jpeg_core.c (100%) rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/mtk_jpeg_core.h (100%) rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/mtk_jpeg_dec_hw.c (100%) rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/mtk_jpeg_dec_hw.h (100%) rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/mtk_jpeg_dec_parse.c (100%) rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/mtk_jpeg_dec_parse.h (100%) rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/mtk_jpeg_dec_reg.h (100%) rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/mtk_jpeg_enc_hw.c (100%) rename drivers/media/platform/{mtk-jpeg => mediatek/jpeg}/mtk_jpeg_enc_hw.h (100%) create mode 100644 drivers/media/platform/mediatek/mdp/Kconfig rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/Makefile (78%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_comp.c (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_comp.h (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_core.c (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_core.h (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_ipi.h (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_m2m.c (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_m2m.h (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_regs.c (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_regs.h (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_vpu.c (100%) rename drivers/media/platform/{mtk-mdp => mediatek/mdp}/mtk_mdp_vpu.h (100%) create mode 100644 drivers/media/platform/mediatek/vcodec/Kconfig rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/Makefile (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_dec.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_dec.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_dec_drv.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_dec_hw.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_dec_hw.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_dec_pm.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_dec_pm.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_dec_stateful.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_dec_stateless.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_drv.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_enc.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_enc.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_enc_drv.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_enc_pm.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_enc_pm.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_fw.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_fw.h (97%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_fw_priv.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_fw_scp.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_fw_vpu.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_intr.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_intr.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_util.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/mtk_vcodec_util.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec/vdec_h264_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec/vdec_h264_req_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec/vdec_vp8_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec/vdec_vp9_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec_drv_base.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec_drv_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec_drv_if.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec_ipi_msg.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec_msg_queue.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec_msg_queue.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec_vpu_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/vdec_vpu_if.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/venc/venc_h264_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/venc/venc_vp8_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/venc_drv_base.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/venc_drv_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/venc_drv_if.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/venc_ipi_msg.h (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/venc_vpu_if.c (100%) rename drivers/media/platform/{mtk-vcodec => mediatek/vcodec}/venc_vpu_if.h (100%) create mode 100644 drivers/media/platform/mediatek/vpu/Kconfig rename drivers/media/platform/{mtk-vpu => mediatek/vpu}/Makefile (100%) rename drivers/media/platform/{mtk-vpu => mediatek/vpu}/mtk_vpu.c (100%) rename drivers/media/platform/{mtk-vpu => mediatek/vpu}/mtk_vpu.h (100%) create mode 100644 drivers/media/platform/nvidia/Kconfig create mode 100644 drivers/media/platform/nvidia/Makefile create mode 100644 drivers/media/platform/nvidia/tegra-vde/Kconfig rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/Makefile (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/dmabuf-cache.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/h264.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/iommu.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/trace.h (97%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/v4l2.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/vde.c (100%) rename drivers/media/platform/{tegra/vde => nvidia/tegra-vde}/vde.h (100%) create mode 100644 drivers/media/platform/nxp/Kconfig create mode 100644 drivers/media/platform/nxp/Makefile rename drivers/media/platform/{ => nxp}/fsl-viu.c (100%) rename drivers/media/platform/{ => nxp}/imx-jpeg/Kconfig (85%) rename drivers/media/platform/{ => nxp}/imx-jpeg/Makefile (100%) rename drivers/media/platform/{ => nxp}/imx-jpeg/mxc-jpeg-hw.c (100%) rename drivers/media/platform/{ => nxp}/imx-jpeg/mxc-jpeg-hw.h (100%) rename drivers/media/platform/{ => nxp}/imx-jpeg/mxc-jpeg.c (99%) rename drivers/media/platform/{ => nxp}/imx-jpeg/mxc-jpeg.h (100%) rename drivers/media/platform/{imx => nxp}/imx-mipi-csis.c (100%) rename drivers/media/platform/{ => nxp}/imx-pxp.c (100%) rename drivers/media/platform/{ => nxp}/imx-pxp.h (100%) rename drivers/media/platform/{ => nxp}/mx2_emmaprp.c (100%) create mode 100644 drivers/media/platform/qcom/Kconfig create mode 100644 drivers/media/platform/qcom/Makefile create mode 100644 drivers/media/platform/qcom/camss/Kconfig create mode 100644 drivers/media/platform/qcom/venus/Kconfig create mode 100644 drivers/media/platform/renesas/Kconfig create mode 100644 drivers/media/platform/renesas/Makefile rename drivers/media/platform/{ => renesas}/rcar-fcp.c (100%) rename drivers/media/platform/{ => renesas}/rcar-isp.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/Kconfig (87%) rename drivers/media/platform/{ => renesas}/rcar-vin/Makefile (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-core.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-csi2.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-dma.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-v4l2.c (100%) rename drivers/media/platform/{ => renesas}/rcar-vin/rcar-vin.h (100%) rename drivers/media/platform/{ => renesas}/rcar_drif.c (100%) rename drivers/media/platform/{ => renesas}/rcar_fdp1.c (100%) rename drivers/media/platform/{ => renesas}/rcar_jpu.c (99%) rename drivers/media/platform/{ => renesas}/renesas-ceu.c (100%) rename drivers/media/platform/{ => renesas}/sh_vou.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/Makefile (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_brx.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_brx.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_clu.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_clu.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_dl.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_dl.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_drm.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_drm.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_drv.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_entity.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_entity.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hgo.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hgo.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hgt.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hgt.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_histo.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_histo.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hsit.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_hsit.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_lif.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_lif.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_lut.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_lut.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_pipe.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_pipe.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_regs.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_rpf.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_rwpf.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_rwpf.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_sru.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_sru.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_uds.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_uds.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_uif.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_uif.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_video.c (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_video.h (100%) rename drivers/media/platform/{ => renesas}/vsp1/vsp1_wpf.c (100%) create mode 100644 drivers/media/platform/rockchip/Kconfig create mode 100644 drivers/media/platform/rockchip/Makefile create mode 100644 drivers/media/platform/rockchip/rga/Kconfig create mode 100644 drivers/media/platform/rockchip/rkisp1/Kconfig create mode 100644 drivers/media/platform/samsung/Kconfig create mode 100644 drivers/media/platform/samsung/Makefile create mode 100644 drivers/media/platform/samsung/exynos-gsc/Kconfig rename drivers/media/platform/{ => samsung}/exynos-gsc/Makefile (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-core.c (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-core.h (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-m2m.c (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-regs.c (100%) rename drivers/media/platform/{ => samsung}/exynos-gsc/gsc-regs.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/Kconfig (96%) rename drivers/media/platform/{ => samsung}/exynos4-is/Makefile (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/common.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/common.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-capture.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-core.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-core.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-command.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-errno.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-errno.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-i2c.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-i2c.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-param.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-param.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-regs.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-regs.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-sensor.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is-sensor.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-is.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-isp-video.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-isp-video.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-isp.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-isp.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-lite-reg.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-lite-reg.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-lite.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-lite.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-m2m.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-reg.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/fimc-reg.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/media-dev.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/media-dev.h (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/mipi-csis.c (100%) rename drivers/media/platform/{ => samsung}/exynos4-is/mipi-csis.h (100%) create mode 100644 drivers/media/platform/samsung/s3c-camif/Kconfig rename drivers/media/platform/{ => samsung}/s3c-camif/Makefile (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-capture.c (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-core.c (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-core.h (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-regs.c (100%) rename drivers/media/platform/{ => samsung}/s3c-camif/camif-regs.h (100%) create mode 100644 drivers/media/platform/samsung/s5p-g2d/Kconfig rename drivers/media/platform/{ => samsung}/s5p-g2d/Makefile (100%) rename drivers/media/platform/{ => samsung}/s5p-g2d/g2d-hw.c (100%) rename drivers/media/platform/{ => samsung}/s5p-g2d/g2d-regs.h (100%) rename drivers/media/platform/{ => samsung}/s5p-g2d/g2d.c (100%) rename drivers/media/platform/{ => samsung}/s5p-g2d/g2d.h (100%) create mode 100644 drivers/media/platform/samsung/s5p-jpeg/Kconfig rename drivers/media/platform/{ => samsung}/s5p-jpeg/Makefile (100%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-core.c (99%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-core.h (99%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-exynos3250.c (100%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-exynos3250.h (97%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-exynos4.c (100%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-exynos4.h (100%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-s5p.c (99%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-hw-s5p.h (97%) rename drivers/media/platform/{ => samsung}/s5p-jpeg/jpeg-regs.h (99%) create mode 100644 drivers/media/platform/samsung/s5p-mfc/Kconfig rename drivers/media/platform/{ => samsung}/s5p-mfc/Makefile (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc-v10.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc-v6.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc-v7.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc-v8.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/regs-mfc.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc.c (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd.c (89%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd.h (92%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd_v5.c (98%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd_v5.h (82%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd_v6.c (98%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_cmd_v6.h (82%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_common.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_ctrl.c (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_ctrl.h (92%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_debug.h (95%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_dec.c (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_dec.h (90%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_enc.c (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_enc.h (90%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_intr.c (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_intr.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_iommu.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr.c (98%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr.h (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr_v5.c (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr_v5.h (100%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr_v6.c (99%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_opr_v6.h (96%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_pm.c (97%) rename drivers/media/platform/{ => samsung}/s5p-mfc/s5p_mfc_pm.h (87%) create mode 100644 drivers/media/platform/stm/Kconfig create mode 100644 drivers/media/platform/stm/Makefile create mode 100644 drivers/media/platform/stm/sti/Kconfig create mode 100644 drivers/media/platform/stm/sti/Makefile create mode 100644 drivers/media/platform/stm/sti/bdisp/Kconfig rename drivers/media/platform/{ => stm}/sti/bdisp/Makefile (100%) rename drivers/media/platform/{ => stm}/sti/bdisp/bdisp-debug.c (100%) rename drivers/media/platform/{ => stm}/sti/bdisp/bdisp-filter.h (100%) rename drivers/media/platform/{ => stm}/sti/bdisp/bdisp-hw.c (100%) rename drivers/media/platform/{ => stm}/sti/bdisp/bdisp-reg.h (100%) rename drivers/media/platform/{ => stm}/sti/bdisp/bdisp-v4l2.c (100%) rename drivers/media/platform/{ => stm}/sti/bdisp/bdisp.h (100%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/Kconfig (96%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/Makefile (100%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/c8sectpfe-common.c (100%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/c8sectpfe-common.h (100%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/c8sectpfe-core.c (100%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/c8sectpfe-core.h (100%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/c8sectpfe-debugfs.c (100%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/c8sectpfe-debugfs.h (100%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/c8sectpfe-dvb.c (100%) rename drivers/media/platform/{ => stm}/sti/c8sectpfe/c8sectpfe-dvb.h (100%) create mode 100644 drivers/media/platform/stm/sti/delta/Kconfig rename drivers/media/platform/{ => stm}/sti/delta/Makefile (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-cfg.h (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-debug.c (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-debug.h (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-ipc.c (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-ipc.h (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-mem.c (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-mem.h (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-mjpeg-dec.c (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-mjpeg-fw.h (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-mjpeg-hdr.c (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-mjpeg.h (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta-v4l2.c (100%) rename drivers/media/platform/{ => stm}/sti/delta/delta.h (100%) create mode 100644 drivers/media/platform/stm/sti/hva/Kconfig rename drivers/media/platform/{ => stm}/sti/hva/Makefile (100%) rename drivers/media/platform/{ => stm}/sti/hva/hva-debugfs.c (100%) rename drivers/media/platform/{ => stm}/sti/hva/hva-h264.c (100%) rename drivers/media/platform/{ => stm}/sti/hva/hva-hw.c (100%) rename drivers/media/platform/{ => stm}/sti/hva/hva-hw.h (100%) rename drivers/media/platform/{ => stm}/sti/hva/hva-mem.c (100%) rename drivers/media/platform/{ => stm}/sti/hva/hva-mem.h (100%) rename drivers/media/platform/{ => stm}/sti/hva/hva-v4l2.c (100%) rename drivers/media/platform/{ => stm}/sti/hva/hva.h (100%) create mode 100644 drivers/media/platform/stm/stm32/Kconfig rename drivers/media/platform/{ => stm}/stm32/Makefile (100%) rename drivers/media/platform/{ => stm}/stm32/dma2d/dma2d-hw.c (100%) rename drivers/media/platform/{ => stm}/stm32/dma2d/dma2d-regs.h (100%) rename drivers/media/platform/{ => stm}/stm32/dma2d/dma2d.c (100%) rename drivers/media/platform/{ => stm}/stm32/dma2d/dma2d.h (100%) rename drivers/media/platform/{ => stm}/stm32/stm32-dcmi.c (100%) delete mode 100644 drivers/media/platform/sunxi/Kconfig create mode 100644 drivers/media/platform/ti/Kconfig create mode 100644 drivers/media/platform/ti/Makefile rename drivers/media/platform/{ => ti}/am437x/Kconfig (88%) rename drivers/media/platform/{ => ti}/am437x/Makefile (100%) rename drivers/media/platform/{ => ti}/am437x/am437x-vpfe.c (100%) rename drivers/media/platform/{ => ti}/am437x/am437x-vpfe.h (100%) rename drivers/media/platform/{ => ti}/am437x/am437x-vpfe_regs.h (100%) create mode 100644 drivers/media/platform/ti/cal/Makefile rename drivers/media/platform/{ti-vpe => ti/cal}/cal-camerarx.c (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal-video.c (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal.c (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal.h (100%) rename drivers/media/platform/{ti-vpe => ti/cal}/cal_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/Kconfig (90%) rename drivers/media/platform/{ => ti}/davinci/Makefile (100%) rename drivers/media/platform/{ => ti}/davinci/ccdc_hw_device.h (100%) rename drivers/media/platform/{ => ti}/davinci/dm355_ccdc.c (100%) rename drivers/media/platform/{ => ti}/davinci/dm355_ccdc_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/dm644x_ccdc.c (100%) rename drivers/media/platform/{ => ti}/davinci/dm644x_ccdc_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/isif.c (100%) rename drivers/media/platform/{ => ti}/davinci/isif_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_display.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_osd.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_osd_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_venc.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpbe_venc_regs.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpfe_capture.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpif.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpif.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpif_capture.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpif_capture.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpif_display.c (100%) rename drivers/media/platform/{ => ti}/davinci/vpif_display.h (100%) rename drivers/media/platform/{ => ti}/davinci/vpss.c (100%) rename drivers/media/platform/{ => ti}/omap/Kconfig (89%) rename drivers/media/platform/{ => ti}/omap/Makefile (100%) rename drivers/media/platform/{ => ti}/omap/omap_vout.c (100%) rename drivers/media/platform/{ => ti}/omap/omap_vout_vrfb.c (100%) rename drivers/media/platform/{ => ti}/omap/omap_vout_vrfb.h (100%) rename drivers/media/platform/{ => ti}/omap/omap_voutdef.h (100%) rename drivers/media/platform/{ => ti}/omap/omap_voutlib.c (100%) rename drivers/media/platform/{ => ti}/omap/omap_voutlib.h (100%) create mode 100644 drivers/media/platform/ti/omap3isp/Kconfig rename drivers/media/platform/{ => ti}/omap3isp/Makefile (100%) rename drivers/media/platform/{ => ti}/omap3isp/cfa_coef_table.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/gamma_table.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/isp.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isp.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispccdc.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispccdc.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispccp2.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispccp2.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispcsi2.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispcsi2.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispcsiphy.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispcsiphy.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/isph3a.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/isph3a_aewb.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isph3a_af.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isphist.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isphist.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/isppreview.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/isppreview.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispreg.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispresizer.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispresizer.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispstat.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispstat.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispvideo.c (100%) rename drivers/media/platform/{ => ti}/omap3isp/ispvideo.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/luma_enhance_table.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/noise_filter_table.h (100%) rename drivers/media/platform/{ => ti}/omap3isp/omap3isp.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/Makefile (78%) rename drivers/media/platform/{ti-vpe => ti/vpe}/csc.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/csc.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/sc_coeff.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpdma_priv.h (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpe.c (100%) rename drivers/media/platform/{ti-vpe => ti/vpe}/vpe_regs.h (100%) create mode 100644 drivers/media/platform/via/Kconfig create mode 100644 drivers/media/platform/via/Makefile rename drivers/media/platform/{ => via}/via-camera.c (100%) rename drivers/media/platform/{ => via}/via-camera.h (100%) rename drivers/media/tuners/{tuner-xc2028-types.h => xc2028-types.h} (96%) rename drivers/media/tuners/{tuner-xc2028.c => xc2028.c} (99%) rename drivers/media/tuners/{tuner-xc2028.h => xc2028.h} (99%) -- 2.35.1

1 1

[PATCH] media: Kconfig: cleanup VIDEO_DEV dependencies
by Mauro Carvalho Chehab 14 Mar '22

14 Mar '22

media Kconfig has two entries associated to V4L API: VIDEO_DEV and VIDEO_V4L2. On Kernel 2.6.x, there were two V4L APIs, each one with its own flag. VIDEO_DEV were meant to: 1) enable Video4Linux and make its Kconfig options to appear; 2) it makes the Kernel build the V4L core. while VIDEO_V4L2 where used to distinguish between drivers that implement the newer API and drivers that implemented the former one. With time, such meaning changed, specially after the removal of all V4L version 1 drivers. At the current implementation, VIDEO_DEV only does (1): it enables the media options related to V4L, that now has: menu "Video4Linux options" visible if VIDEO_DEV source "drivers/media/v4l2-core/Kconfig" endmenu but it doesn't affect anymore the V4L core drivers. The rationale is that the V4L2 core has a "soft" dependency at the I2C bus, and now requires to select a number of other Kconfig options: config VIDEO_V4L2 tristate depends on (I2C || I2C=n) && VIDEO_DEV select RATIONAL select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE default (I2C || I2C=n) && VIDEO_DEV In the past, merging them would be tricky, but it seems that it is now possible to merge those symbols, in order to simplify V4L dependencies. Let's keep VIDEO_DEV, as this one is used on some make *defconfig configurations. Suggested-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> --- drivers/input/rmi4/Kconfig | 2 +- drivers/input/touchscreen/Kconfig | 4 +- drivers/media/Kconfig | 3 + drivers/media/common/saa7146/Kconfig | 2 +- drivers/media/dvb-core/Kconfig | 2 +- drivers/media/dvb-frontends/Kconfig | 4 +- drivers/media/i2c/Kconfig | 250 +++++++++--------- drivers/media/i2c/ccs/Kconfig | 2 +- drivers/media/i2c/cx25840/Kconfig | 2 +- drivers/media/i2c/et8ek8/Kconfig | 2 +- drivers/media/i2c/m5mols/Kconfig | 2 +- drivers/media/pci/Kconfig | 2 +- drivers/media/pci/bt8xx/Kconfig | 2 +- drivers/media/pci/cobalt/Kconfig | 2 +- drivers/media/pci/cx18/Kconfig | 2 +- drivers/media/pci/dt3155/Kconfig | 2 +- drivers/media/pci/intel/ipu3/Kconfig | 2 +- drivers/media/pci/ivtv/Kconfig | 2 +- drivers/media/pci/meye/Kconfig | 2 +- drivers/media/pci/saa7146/Kconfig | 6 +- drivers/media/pci/sta2x11/Kconfig | 2 +- drivers/media/pci/tw5864/Kconfig | 2 +- drivers/media/pci/tw68/Kconfig | 2 +- drivers/media/pci/tw686x/Kconfig | 2 +- drivers/media/platform/Kconfig | 6 +- drivers/media/platform/allegro-dvt/Kconfig | 2 +- drivers/media/platform/am437x/Kconfig | 2 +- drivers/media/platform/amphion/Kconfig | 2 +- drivers/media/platform/aspeed/Kconfig | 2 +- drivers/media/platform/atmel/Kconfig | 8 +- drivers/media/platform/cadence/Kconfig | 4 +- drivers/media/platform/coda/Kconfig | 2 +- drivers/media/platform/davinci/Kconfig | 12 +- drivers/media/platform/exynos-gsc/Kconfig | 2 +- drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/media/platform/intel/Kconfig | 2 +- drivers/media/platform/marvell-ccic/Kconfig | 4 +- drivers/media/platform/meson/ge2d/Kconfig | 2 +- drivers/media/platform/mtk-jpeg/Kconfig | 2 +- drivers/media/platform/mtk-mdp/Kconfig | 2 +- drivers/media/platform/mtk-vcodec/Kconfig | 2 +- drivers/media/platform/mtk-vpu/Kconfig | 2 +- drivers/media/platform/nxp/Kconfig | 8 +- drivers/media/platform/nxp/imx-jpeg/Kconfig | 2 +- drivers/media/platform/omap/Kconfig | 2 +- drivers/media/platform/omap3isp/Kconfig | 2 +- drivers/media/platform/qcom/camss/Kconfig | 2 +- drivers/media/platform/qcom/venus/Kconfig | 2 +- drivers/media/platform/renesas/Kconfig | 12 +- .../media/platform/renesas/rcar-vin/Kconfig | 4 +- drivers/media/platform/rockchip/rga/Kconfig | 2 +- .../media/platform/rockchip/rkisp1/Kconfig | 2 +- drivers/media/platform/s3c-camif/Kconfig | 2 +- drivers/media/platform/s5p-g2d/Kconfig | 2 +- drivers/media/platform/s5p-jpeg/Kconfig | 2 +- drivers/media/platform/s5p-mfc/Kconfig | 2 +- drivers/media/platform/sti/bdisp/Kconfig | 2 +- drivers/media/platform/sti/delta/Kconfig | 2 +- drivers/media/platform/sti/hva/Kconfig | 2 +- drivers/media/platform/stm32/Kconfig | 4 +- .../media/platform/sunxi/sun4i-csi/Kconfig | 2 +- .../media/platform/sunxi/sun6i-csi/Kconfig | 2 +- drivers/media/platform/sunxi/sun8i-di/Kconfig | 2 +- .../media/platform/sunxi/sun8i-rotate/Kconfig | 2 +- drivers/media/platform/tegra/vde/Kconfig | 2 +- drivers/media/platform/ti-vpe/Kconfig | 4 +- drivers/media/platform/via/Kconfig | 2 +- drivers/media/platform/xilinx/Kconfig | 2 +- drivers/media/radio/Kconfig | 54 ++-- drivers/media/radio/si470x/Kconfig | 2 +- drivers/media/radio/wl128x/Kconfig | 2 +- drivers/media/spi/Kconfig | 4 +- drivers/media/test-drivers/Kconfig | 2 +- drivers/media/test-drivers/vicodec/Kconfig | 2 +- drivers/media/test-drivers/vimc/Kconfig | 2 +- drivers/media/test-drivers/vivid/Kconfig | 2 +- drivers/media/tuners/Kconfig | 6 +- drivers/media/tuners/e4000.c | 6 +- drivers/media/tuners/fc2580.c | 6 +- drivers/media/usb/airspy/Kconfig | 2 +- drivers/media/usb/au0828/Kconfig | 6 +- drivers/media/usb/cpia2/Kconfig | 2 +- drivers/media/usb/dvb-usb-v2/Kconfig | 8 +- drivers/media/usb/dvb-usb/Kconfig | 4 +- drivers/media/usb/gspca/Kconfig | 96 +++---- drivers/media/usb/gspca/gl860/Kconfig | 2 +- drivers/media/usb/gspca/m5602/Kconfig | 2 +- drivers/media/usb/hackrf/Kconfig | 2 +- drivers/media/usb/hdpvr/Kconfig | 2 +- drivers/media/usb/msi2500/Kconfig | 2 +- drivers/media/usb/pvrusb2/Kconfig | 2 +- drivers/media/usb/pwc/Kconfig | 2 +- drivers/media/usb/s2255/Kconfig | 2 +- drivers/media/usb/stkwebcam/Kconfig | 2 +- drivers/media/usb/usbtv/Kconfig | 2 +- drivers/media/usb/uvc/Kconfig | 2 +- drivers/media/usb/zr364xx/Kconfig | 2 +- drivers/media/v4l2-core/Kconfig | 12 +- drivers/media/v4l2-core/Makefile | 2 +- drivers/staging/media/atomisp/Kconfig | 2 +- drivers/staging/media/atomisp/i2c/Kconfig | 14 +- drivers/staging/media/hantro/Kconfig | 2 +- drivers/staging/media/imx/Kconfig | 2 +- drivers/staging/media/ipu3/Kconfig | 2 +- drivers/staging/media/max96712/Kconfig | 2 +- drivers/staging/media/meson/vdec/Kconfig | 2 +- drivers/staging/media/omap4iss/Kconfig | 2 +- drivers/staging/media/rkvdec/Kconfig | 2 +- drivers/staging/media/sunxi/cedrus/Kconfig | 2 +- drivers/staging/media/tegra-video/Kconfig | 2 +- drivers/staging/media/zoran/Kconfig | 2 +- drivers/staging/most/video/Kconfig | 2 +- .../vc04_services/bcm2835-camera/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 2 +- drivers/usb/gadget/legacy/Kconfig | 2 +- sound/pci/Kconfig | 4 +- 116 files changed, 363 insertions(+), 368 deletions(-) diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig index 16119f760d11..c0163b983ce6 100644 --- a/drivers/input/rmi4/Kconfig +++ b/drivers/input/rmi4/Kconfig @@ -110,7 +110,7 @@ config RMI4_F3A config RMI4_F54 bool "RMI4 Function 54 (Analog diagnostics)" - depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m) + depends on VIDEO_DEV=y || (RMI4_CORE=m && VIDEO_DEV=m) select VIDEOBUF2_VMALLOC select RMI4_F55 help diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2f6adfb7b938..ff7794cecf69 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -131,7 +131,7 @@ config TOUCHSCREEN_ATMEL_MXT config TOUCHSCREEN_ATMEL_MXT_T37 bool "Support T37 Diagnostic Data" depends on TOUCHSCREEN_ATMEL_MXT - depends on VIDEO_V4L2=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_V4L2=m) + depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m) select VIDEOBUF2_VMALLOC help Say Y here if you want support to output data from the T37 @@ -1252,7 +1252,7 @@ config TOUCHSCREEN_SUN4I config TOUCHSCREEN_SUR40 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen" depends on USB && MEDIA_USB_SUPPORT && HAS_DMA - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_DMA_SG help Say Y here if you want support for the Samsung SUR40 touchscreen diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 01b536863657..2d02d9a44b94 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -160,6 +160,9 @@ menu "Media core support" config VIDEO_DEV tristate "Video4Linux core" default MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT || MEDIA_PLATFORM_SUPPORT || MEDIA_TEST_SUPPORT + depends on (I2C || I2C=n) + select RATIONAL + select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE help Enables the V4L2 API, used by cameras, analog TV, video grabbers, radio devices and by some input devices. diff --git a/drivers/media/common/saa7146/Kconfig b/drivers/media/common/saa7146/Kconfig index 3e85c0c3fd9a..a0aa155e5d85 100644 --- a/drivers/media/common/saa7146/Kconfig +++ b/drivers/media/common/saa7146/Kconfig @@ -5,6 +5,6 @@ config VIDEO_SAA7146 config VIDEO_SAA7146_VV tristate - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF_DMA_SG select VIDEO_SAA7146 diff --git a/drivers/media/dvb-core/Kconfig b/drivers/media/dvb-core/Kconfig index 6ffac618417b..8b3f2d53cd62 100644 --- a/drivers/media/dvb-core/Kconfig +++ b/drivers/media/dvb-core/Kconfig @@ -6,7 +6,7 @@ config DVB_MMAP bool "Enable DVB memory-mapped API (EXPERIMENTAL)" depends on DVB_CORE - depends on VIDEO_V4L2=y || VIDEO_V4L2=DVB_CORE + depends on VIDEO_DEV=y || VIDEO_DEV=DVB_CORE select VIDEOBUF2_VMALLOC help This option enables DVB experimental memory-mapped API, which diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 2c1ed98d43c5..4101f9b1e731 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -510,7 +510,7 @@ config DVB_RTL2832 config DVB_RTL2832_SDR tristate "Realtek RTL2832 SDR" - depends on DVB_CORE && I2C && I2C_MUX && VIDEO_V4L2 && MEDIA_SDR_SUPPORT && USB + depends on DVB_CORE && I2C && I2C_MUX && VIDEO_DEV && MEDIA_SDR_SUPPORT && USB select DVB_RTL2832 select VIDEOBUF2_VMALLOC default m if !MEDIA_SUBDRV_AUTOSELECT @@ -681,7 +681,7 @@ config DVB_AU8522_DTV config DVB_AU8522_V4L tristate "Auvitek AU8522 based ATV demod" - depends on VIDEO_V4L2 && DVB_CORE && I2C + depends on VIDEO_DEV && DVB_CORE && I2C select DVB_AU8522 default m if !MEDIA_SUBDRV_AUTOSELECT help diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index e7194c1be4d2..5abc169f0a5c 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -3,7 +3,7 @@ # Multimedia Video device configuration # -if VIDEO_V4L2 +if VIDEO_DEV comment "IR I2C driver auto-selected by 'Autoselect ancillary drivers'" depends on MEDIA_SUBDRV_AUTOSELECT && I2C && RC_CORE @@ -36,7 +36,7 @@ menu "Audio decoders, processors and mixers" config VIDEO_TVAUDIO tristate "Simple audio decoder chips" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for several audio decoder chips found on some bt8xx boards: Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, @@ -48,7 +48,7 @@ config VIDEO_TVAUDIO config VIDEO_TDA7432 tristate "Philips TDA7432 audio processor" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for tda7432 audio decoder chip found on some bt8xx boards. @@ -66,7 +66,7 @@ config VIDEO_TDA9840 config VIDEO_TDA1997X tristate "NXP TDA1997x HDMI receiver" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on SND_SOC select HDMI select SND_PCM @@ -99,7 +99,7 @@ config VIDEO_TEA6420 config VIDEO_MSP3400 tristate "Micronas MSP34xx audio decoders" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Micronas MSP34xx series of audio decoders. @@ -108,7 +108,7 @@ config VIDEO_MSP3400 config VIDEO_CS3308 tristate "Cirrus Logic CS3308 audio ADC" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Cirrus Logic CS3308 High Performance 8-Channel Analog Volume Control @@ -118,7 +118,7 @@ config VIDEO_CS3308 config VIDEO_CS5345 tristate "Cirrus Logic CS5345 audio ADC" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Cirrus Logic CS5345 24-bit, 192 kHz stereo A/D converter. @@ -128,7 +128,7 @@ config VIDEO_CS5345 config VIDEO_CS53L32A tristate "Cirrus Logic CS53L32A audio ADC" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Cirrus Logic CS53L32A low voltage stereo A/D converter. @@ -138,7 +138,7 @@ config VIDEO_CS53L32A config VIDEO_TLV320AIC23B tristate "Texas Instruments TLV320AIC23B audio codec" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Texas Instruments TLV320AIC23B audio codec. @@ -147,7 +147,7 @@ config VIDEO_TLV320AIC23B config VIDEO_UDA1342 tristate "Philips UDA1342 audio codec" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Philips UDA1342 audio codec. @@ -156,7 +156,7 @@ config VIDEO_UDA1342 config VIDEO_WM8775 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Wolfson Microelectronics WM8775 high performance stereo A/D Converter with a 4 channel input mixer. @@ -166,7 +166,7 @@ config VIDEO_WM8775 config VIDEO_WM8739 tristate "Wolfson Microelectronics WM8739 stereo audio ADC" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Wolfson Microelectronics WM8739 stereo A/D Converter. @@ -176,7 +176,7 @@ config VIDEO_WM8739 config VIDEO_VP27SMPX tristate "Panasonic VP27's internal MPX" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the internal MPX of the Panasonic VP27s tuner. @@ -185,7 +185,7 @@ config VIDEO_VP27SMPX config VIDEO_SONY_BTF_MPX tristate "Sony BTF's internal MPX" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the internal MPX of the Sony BTF-PG472Z tuner. @@ -198,7 +198,7 @@ menu "RDS decoders" config VIDEO_SAA6588 tristate "SAA6588 Radio Chip RDS decoder support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for this Radio Data System (RDS) decoder. This allows @@ -214,7 +214,7 @@ menu "Video decoders" config VIDEO_ADV7180 tristate "Analog Devices ADV7180 decoder" - depends on GPIOLIB && VIDEO_V4L2 && I2C + depends on GPIOLIB && VIDEO_DEV && I2C select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_ASYNC @@ -226,7 +226,7 @@ config VIDEO_ADV7180 config VIDEO_ADV7183 tristate "Analog Devices ADV7183 decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help V4l2 subdevice driver for the Analog Devices ADV7183 video decoder. @@ -236,7 +236,7 @@ config VIDEO_ADV7183 config VIDEO_ADV748X tristate "Analog Devices ADV748x decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on OF select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -251,7 +251,7 @@ config VIDEO_ADV748X config VIDEO_ADV7604 tristate "Analog Devices ADV7604 decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on GPIOLIB || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -277,7 +277,7 @@ config VIDEO_ADV7604_CEC config VIDEO_ADV7842 tristate "Analog Devices ADV7842 decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select HDMI @@ -300,7 +300,7 @@ config VIDEO_ADV7842_CEC config VIDEO_BT819 tristate "BT819A VideoStream decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for BT819A video decoder. @@ -309,7 +309,7 @@ config VIDEO_BT819 config VIDEO_BT856 tristate "BT856 VideoStream decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for BT856 video decoder. @@ -318,7 +318,7 @@ config VIDEO_BT856 config VIDEO_BT866 tristate "BT866 VideoStream decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for BT866 video decoder. @@ -327,7 +327,7 @@ config VIDEO_BT866 config VIDEO_ISL7998X tristate "Intersil ISL7998x video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on OF_GPIO select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -337,7 +337,7 @@ config VIDEO_ISL7998X config VIDEO_KS0127 tristate "KS0127 video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for KS0127 video decoder. @@ -349,7 +349,7 @@ config VIDEO_KS0127 config VIDEO_ML86V7667 tristate "OKI ML86V7667 video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the OKI Semiconductor ML86V7667 video decoder. @@ -358,7 +358,7 @@ config VIDEO_ML86V7667 config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Philips SAA7110 video decoders. @@ -367,7 +367,7 @@ config VIDEO_SAA7110 config VIDEO_SAA711X tristate "Philips SAA7111/3/4/5 video decoders" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Philips SAA7111/3/4/5 video decoders. @@ -376,7 +376,7 @@ config VIDEO_SAA711X config VIDEO_TC358743 tristate "Toshiba TC358743 decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select HDMI @@ -397,7 +397,7 @@ config VIDEO_TC358743_CEC config VIDEO_TVP514X tristate "Texas Instruments TVP514x video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select V4L2_FWNODE help This is a Video4Linux2 sensor driver for the TI TVP5146/47 @@ -409,7 +409,7 @@ config VIDEO_TVP514X config VIDEO_TVP5150 tristate "Texas Instruments TVP5150 video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select V4L2_FWNODE select REGMAP_I2C help @@ -420,7 +420,7 @@ config VIDEO_TVP5150 config VIDEO_TVP7002 tristate "Texas Instruments TVP7002 video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select V4L2_FWNODE help Support for the Texas Instruments TVP7002 video decoder. @@ -430,7 +430,7 @@ config VIDEO_TVP7002 config VIDEO_TW2804 tristate "Techwell TW2804 multiple video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Techwell tw2804 multiple video decoder. @@ -439,7 +439,7 @@ config VIDEO_TW2804 config VIDEO_TW9903 tristate "Techwell TW9903 video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Techwell tw9903 multi-standard video decoder with high quality down scaler. @@ -449,7 +449,7 @@ config VIDEO_TW9903 config VIDEO_TW9906 tristate "Techwell TW9906 video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Techwell tw9906 enhanced multi-standard comb filter video decoder with YCbCr input support. @@ -459,7 +459,7 @@ config VIDEO_TW9906 config VIDEO_TW9910 tristate "Techwell TW9910 video decoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select V4L2_ASYNC help Support for Techwell TW9910 NTSC/PAL/SECAM video decoder. @@ -469,7 +469,7 @@ config VIDEO_TW9910 config VIDEO_VPX3220 tristate "vpx3220a, vpx3216b & vpx3214c video decoders" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for VPX322x video decoders. @@ -479,7 +479,7 @@ config VIDEO_VPX3220 config VIDEO_MAX9286 tristate "Maxim MAX9286 GMSL deserializer support" depends on I2C && I2C_MUX - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on OF_GPIO select V4L2_FWNODE select VIDEO_V4L2_SUBDEV_API @@ -494,7 +494,7 @@ comment "Video and audio decoders" config VIDEO_SAA717X tristate "Philips SAA7171/3/4 audio/video decoders" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Philips SAA7171/3/4 audio/video decoders. @@ -510,7 +510,7 @@ menu "Video encoders" config VIDEO_SAA7127 tristate "Philips SAA7127/9 digital video encoders" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Philips SAA7127/9 digital video encoders. @@ -519,7 +519,7 @@ config VIDEO_SAA7127 config VIDEO_SAA7185 tristate "Philips SAA7185 video encoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Philips SAA7185 video encoder. @@ -528,7 +528,7 @@ config VIDEO_SAA7185 config VIDEO_ADV7170 tristate "Analog Devices ADV7170 video encoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Analog Devices ADV7170 video encoder driver @@ -537,7 +537,7 @@ config VIDEO_ADV7170 config VIDEO_ADV7175 tristate "Analog Devices ADV7175 video encoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Analog Devices ADV7175 video encoder driver @@ -565,7 +565,7 @@ config VIDEO_ADV7393 config VIDEO_ADV7511 tristate "Analog Devices ADV7511 encoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on DRM_I2C_ADV7511=n || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -588,7 +588,7 @@ config VIDEO_ADV7511_CEC config VIDEO_AD9389B tristate "Analog Devices AD9389B encoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -608,7 +608,7 @@ config VIDEO_AK881X config VIDEO_THS8200 tristate "Texas Instruments THS8200 video encoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select V4L2_ASYNC help Support for the Texas Instruments THS8200 video encoder. @@ -622,7 +622,7 @@ menu "Video improvement chips" config VIDEO_UPD64031A tristate "NEC Electronics uPD64031A Ghost Reduction" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select V4L2_ASYNC help Support for the NEC Electronics uPD64031A Ghost Reduction @@ -635,7 +635,7 @@ config VIDEO_UPD64031A config VIDEO_UPD64083 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the NEC Electronics uPD64083 3-Dimensional Y/C separation video chip. It is used to improve the quality of @@ -650,7 +650,7 @@ menu "Audio/Video compression chips" config VIDEO_SAA6752HS tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select CRC32 help Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 @@ -666,7 +666,7 @@ menu "SDR tuner chips" config SDR_MAX2175 tristate "Maxim 2175 RF to Bits tuner" - depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C + depends on VIDEO_DEV && MEDIA_SDR_SUPPORT && I2C select REGMAP_I2C select V4L2_ASYNC help @@ -684,7 +684,7 @@ menu "Miscellaneous helper chips" config VIDEO_THS7303 tristate "THS7303/53 Video Amplifier" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select V4L2_ASYNC help Support for TI THS7303/53 video amplifier @@ -694,7 +694,7 @@ config VIDEO_THS7303 config VIDEO_M52790 tristate "Mitsubishi M52790 A/V switch" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Mitsubishi M52790 A/V switch. @@ -703,7 +703,7 @@ config VIDEO_M52790 config VIDEO_I2C tristate "I2C transport video support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select VIDEOBUF2_VMALLOC imply HWMON help @@ -717,7 +717,7 @@ config VIDEO_I2C config VIDEO_ST_MIPID02 tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -745,7 +745,7 @@ config VIDEO_CCS_PLL config VIDEO_HI556 tristate "Hynix Hi-556 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -758,7 +758,7 @@ config VIDEO_HI556 config VIDEO_HI846 tristate "Hynix Hi-846 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -771,7 +771,7 @@ config VIDEO_HI846 config VIDEO_HI847 tristate "Hynix Hi-847 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -784,7 +784,7 @@ config VIDEO_HI847 config VIDEO_IMX208 tristate "Sony IMX208 sensor support" - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on I2C && VIDEO_DEV && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT help This is a Video4Linux2 sensor driver for the Sony @@ -795,7 +795,7 @@ config VIDEO_IMX208 config VIDEO_IMX214 tristate "Sony IMX214 sensor support" - depends on GPIOLIB && I2C && VIDEO_V4L2 + depends on GPIOLIB && I2C && VIDEO_DEV select V4L2_FWNODE select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -809,7 +809,7 @@ config VIDEO_IMX214 config VIDEO_IMX219 tristate "Sony IMX219 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -822,7 +822,7 @@ config VIDEO_IMX219 config VIDEO_IMX258 tristate "Sony IMX258 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help @@ -834,7 +834,7 @@ config VIDEO_IMX258 config VIDEO_IMX274 tristate "Sony IMX274 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select REGMAP_I2C @@ -844,7 +844,7 @@ config VIDEO_IMX274 config VIDEO_IMX290 tristate "Sony IMX290 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select REGMAP_I2C @@ -858,7 +858,7 @@ config VIDEO_IMX290 config VIDEO_IMX319 tristate "Sony IMX319 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help @@ -871,7 +871,7 @@ config VIDEO_IMX319 config VIDEO_IMX334 tristate "Sony IMX334 sensor support" depends on OF_GPIO - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select VIDEO_V4L2_SUBDEV_API select MEDIA_CONTROLLER select V4L2_FWNODE @@ -885,7 +885,7 @@ config VIDEO_IMX334 config VIDEO_IMX335 tristate "Sony IMX335 sensor support" depends on OF_GPIO - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select VIDEO_V4L2_SUBDEV_API select MEDIA_CONTROLLER select V4L2_FWNODE @@ -898,7 +898,7 @@ config VIDEO_IMX335 config VIDEO_IMX355 tristate "Sony IMX355 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help @@ -911,7 +911,7 @@ config VIDEO_IMX355 config VIDEO_IMX412 tristate "Sony IMX412 sensor support" depends on OF_GPIO - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select VIDEO_V4L2_SUBDEV_API select MEDIA_CONTROLLER select V4L2_FWNODE @@ -924,7 +924,7 @@ config VIDEO_IMX412 config VIDEO_OG01A1B tristate "OmniVision OG01A1B sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -937,7 +937,7 @@ config VIDEO_OG01A1B config VIDEO_OV02A10 tristate "OmniVision OV02A10 sensor support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -950,7 +950,7 @@ config VIDEO_OV02A10 config VIDEO_OV08D10 tristate "OmniVision OV08D10 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -963,7 +963,7 @@ config VIDEO_OV08D10 config VIDEO_OV2640 tristate "OmniVision OV2640 sensor support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help This is a Video4Linux2 sensor driver for the OmniVision OV2640 camera. @@ -973,7 +973,7 @@ config VIDEO_OV2640 config VIDEO_OV2659 tristate "OmniVision OV2659 sensor support" - depends on VIDEO_V4L2 && I2C && GPIOLIB + depends on VIDEO_DEV && I2C && GPIOLIB select V4L2_FWNODE help This is a Video4Linux2 sensor driver for the OmniVision @@ -984,7 +984,7 @@ config VIDEO_OV2659 config VIDEO_OV2680 tristate "OmniVision OV2680 sensor support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select MEDIA_CONTROLLER select V4L2_FWNODE help @@ -996,7 +996,7 @@ config VIDEO_OV2680 config VIDEO_OV2685 tristate "OmniVision OV2685 sensor support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select MEDIA_CONTROLLER select V4L2_FWNODE help @@ -1008,7 +1008,7 @@ config VIDEO_OV2685 config VIDEO_OV2740 tristate "OmniVision OV2740 sensor support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on ACPI || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -1024,7 +1024,7 @@ config VIDEO_OV2740 config VIDEO_OV5640 tristate "OmniVision OV5640 sensor support" depends on OF - depends on GPIOLIB && VIDEO_V4L2 && I2C + depends on GPIOLIB && VIDEO_DEV && I2C select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1035,7 +1035,7 @@ config VIDEO_OV5640 config VIDEO_OV5645 tristate "OmniVision OV5645 sensor support" depends on OF - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1048,7 +1048,7 @@ config VIDEO_OV5645 config VIDEO_OV5647 tristate "OmniVision OV5647 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1061,7 +1061,7 @@ config VIDEO_OV5647 config VIDEO_OV5648 tristate "OmniVision OV5648 sensor support" - depends on I2C && PM && VIDEO_V4L2 + depends on I2C && PM && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1074,7 +1074,7 @@ config VIDEO_OV5648 config VIDEO_OV6650 tristate "OmniVision OV6650 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor driver for the OmniVision OV6650 camera. @@ -1084,7 +1084,7 @@ config VIDEO_OV6650 config VIDEO_OV5670 tristate "OmniVision OV5670 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1097,7 +1097,7 @@ config VIDEO_OV5670 config VIDEO_OV5675 tristate "OmniVision OV5675 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1110,7 +1110,7 @@ config VIDEO_OV5675 config VIDEO_OV5693 tristate "OmniVision OV5693 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select V4L2_FWNODE help This is a Video4Linux2 sensor driver for the OmniVision @@ -1121,7 +1121,7 @@ config VIDEO_OV5693 config VIDEO_OV5695 tristate "OmniVision OV5695 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select V4L2_FWNODE help This is a Video4Linux2 sensor driver for the OmniVision @@ -1132,7 +1132,7 @@ config VIDEO_OV5695 config VIDEO_OV7251 tristate "OmniVision OV7251 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1145,7 +1145,7 @@ config VIDEO_OV7251 config VIDEO_OV772X tristate "OmniVision OV772x sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select REGMAP_SCCB select V4L2_FWNODE help @@ -1157,7 +1157,7 @@ config VIDEO_OV772X config VIDEO_OV7640 tristate "OmniVision OV7640 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor driver for the OmniVision OV7640 camera. @@ -1167,7 +1167,7 @@ config VIDEO_OV7640 config VIDEO_OV7670 tristate "OmniVision OV7670 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select V4L2_FWNODE help This is a Video4Linux2 sensor driver for the OmniVision @@ -1176,7 +1176,7 @@ config VIDEO_OV7670 config VIDEO_OV7740 tristate "OmniVision OV7740 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select REGMAP_SCCB help This is a Video4Linux2 sensor driver for the OmniVision @@ -1184,7 +1184,7 @@ config VIDEO_OV7740 config VIDEO_OV8856 tristate "OmniVision OV8856 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1197,7 +1197,7 @@ config VIDEO_OV8856 config VIDEO_OV8865 tristate "OmniVision OV8865 sensor support" - depends on I2C && PM && VIDEO_V4L2 + depends on I2C && PM && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1211,7 +1211,7 @@ config VIDEO_OV8865 config VIDEO_OV9282 tristate "OmniVision OV9282 sensor support" depends on OF_GPIO - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select VIDEO_V4L2_SUBDEV_API select MEDIA_CONTROLLER select V4L2_FWNODE @@ -1224,14 +1224,14 @@ config VIDEO_OV9282 config VIDEO_OV9640 tristate "OmniVision OV9640 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor driver for the OmniVision OV9640 camera sensor. config VIDEO_OV9650 tristate "OmniVision OV9650/OV9652 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select REGMAP_SCCB @@ -1241,7 +1241,7 @@ config VIDEO_OV9650 config VIDEO_OV9734 tristate "OmniVision OV9734 sensor support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on ACPI || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -1255,7 +1255,7 @@ config VIDEO_OV9734 config VIDEO_OV13858 tristate "OmniVision OV13858 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1265,7 +1265,7 @@ config VIDEO_OV13858 config VIDEO_OV13B10 tristate "OmniVision OV13B10 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1275,7 +1275,7 @@ config VIDEO_OV13B10 config VIDEO_VS6624 tristate "ST VS6624 sensor support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help This is a Video4Linux2 sensor driver for the ST VS6624 camera. @@ -1285,7 +1285,7 @@ config VIDEO_VS6624 config VIDEO_MT9M001 tristate "mt9m001 support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help @@ -1294,7 +1294,7 @@ config VIDEO_MT9M001 config VIDEO_MT9M032 tristate "MT9M032 camera sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select VIDEO_APTINA_PLL @@ -1304,7 +1304,7 @@ config VIDEO_MT9M032 config VIDEO_MT9M111 tristate "mt9m111, mt9m112 and mt9m131 support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select V4L2_FWNODE help This driver supports MT9M111, MT9M112 and MT9M131 cameras from @@ -1312,7 +1312,7 @@ config VIDEO_MT9M111 config VIDEO_MT9P031 tristate "Aptina MT9P031 support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select VIDEO_APTINA_PLL @@ -1323,7 +1323,7 @@ config VIDEO_MT9P031 config VIDEO_MT9T001 tristate "Aptina MT9T001 support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help @@ -1332,7 +1332,7 @@ config VIDEO_MT9T001 config VIDEO_MT9T112 tristate "Aptina MT9T111/MT9T112 support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor driver for the Aptina (Micron) MT9T111 and MT9T112 3 Mpixel camera. @@ -1342,7 +1342,7 @@ config VIDEO_MT9T112 config VIDEO_MT9V011 tristate "Micron mt9v011 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor driver for the Micron mt0v011 1.3 Mpixel camera. It currently only works with the @@ -1350,7 +1350,7 @@ config VIDEO_MT9V011 config VIDEO_MT9V032 tristate "Micron MT9V032 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select REGMAP_I2C @@ -1361,7 +1361,7 @@ config VIDEO_MT9V032 config VIDEO_MT9V111 tristate "Aptina MT9V111 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor driver for the Aptina/Micron MT9V111 sensor. @@ -1371,13 +1371,13 @@ config VIDEO_MT9V111 config VIDEO_SR030PC30 tristate "Siliconfile SR030PC30 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This driver supports SR030PC30 VGA camera from Siliconfile config VIDEO_NOON010PC30 tristate "Siliconfile NOON010PC30 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help @@ -1418,7 +1418,7 @@ config VIDEO_RDACM21 config VIDEO_RJ54N1 tristate "Sharp RJ54N1CB0C sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image sensor. @@ -1428,7 +1428,7 @@ config VIDEO_RJ54N1 config VIDEO_S5K6AA tristate "Samsung S5K6AAFX sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help @@ -1437,7 +1437,7 @@ config VIDEO_S5K6AA config VIDEO_S5K6A3 tristate "Samsung S5K6A3 sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help @@ -1446,7 +1446,7 @@ config VIDEO_S5K6A3 config VIDEO_S5K4ECGX tristate "Samsung S5K4ECGX sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select CRC32 @@ -1456,7 +1456,7 @@ config VIDEO_S5K4ECGX config VIDEO_S5K5BAF tristate "Samsung S5K5BAF sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1469,7 +1469,7 @@ source "drivers/media/i2c/et8ek8/Kconfig" config VIDEO_S5C73M3 tristate "Samsung S5C73M3 sensor support" - depends on I2C && SPI && VIDEO_V4L2 + depends on I2C && SPI && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1484,7 +1484,7 @@ menu "Lens drivers" config VIDEO_AD5820 tristate "AD5820 lens voice coil support" - depends on GPIOLIB && I2C && VIDEO_V4L2 + depends on GPIOLIB && I2C && VIDEO_DEV select MEDIA_CONTROLLER select V4L2_ASYNC help @@ -1493,7 +1493,7 @@ config VIDEO_AD5820 config VIDEO_AK7375 tristate "AK7375 lens voice coil support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_ASYNC @@ -1505,7 +1505,7 @@ config VIDEO_AK7375 config VIDEO_DW9714 tristate "DW9714 lens voice coil support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_ASYNC @@ -1517,7 +1517,7 @@ config VIDEO_DW9714 config VIDEO_DW9768 tristate "DW9768 lens voice coil support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -1529,7 +1529,7 @@ config VIDEO_DW9768 config VIDEO_DW9807_VCM tristate "DW9807 lens voice coil support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_ASYNC @@ -1546,7 +1546,7 @@ menu "Flash devices" config VIDEO_ADP1653 tristate "ADP1653 flash support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select V4L2_ASYNC help @@ -1555,7 +1555,7 @@ config VIDEO_ADP1653 config VIDEO_LM3560 tristate "LM3560 dual flash driver support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select REGMAP_I2C select V4L2_ASYNC @@ -1565,7 +1565,7 @@ config VIDEO_LM3560 config VIDEO_LM3646 tristate "LM3646 dual flash driver support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select REGMAP_I2C select V4L2_ASYNC @@ -1574,4 +1574,4 @@ config VIDEO_LM3646 flash, torch LEDs. endmenu -endif # VIDEO_V4L2 +endif # VIDEO_DEV diff --git a/drivers/media/i2c/ccs/Kconfig b/drivers/media/i2c/ccs/Kconfig index 59f35b33ddc1..71671db3d993 100644 --- a/drivers/media/i2c/ccs/Kconfig +++ b/drivers/media/i2c/ccs/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_CCS tristate "MIPI CCS/SMIA++/SMIA sensor support" - depends on I2C && VIDEO_V4L2 && HAVE_CLK + depends on I2C && VIDEO_DEV && HAVE_CLK select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select VIDEO_CCS_PLL diff --git a/drivers/media/i2c/cx25840/Kconfig b/drivers/media/i2c/cx25840/Kconfig index e392f8e023f6..46f15702cf55 100644 --- a/drivers/media/i2c/cx25840/Kconfig +++ b/drivers/media/i2c/cx25840/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_CX25840 tristate "Conexant CX2584x audio/video decoders" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help Support for the Conexant CX2584x audio/video decoders. diff --git a/drivers/media/i2c/et8ek8/Kconfig b/drivers/media/i2c/et8ek8/Kconfig index afcc4ea764f6..398dd4d21df1 100644 --- a/drivers/media/i2c/et8ek8/Kconfig +++ b/drivers/media/i2c/et8ek8/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_ET8EK8 tristate "ET8EK8 camera sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig index 6f0ef33b7ee1..7f0af32f4376 100644 --- a/drivers/media/i2c/m5mols/Kconfig +++ b/drivers/media/i2c/m5mols/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_M5MOLS tristate "Fujitsu M-5MOLS 8MP sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig index 2cd8e328dda9..92b156530d91 100644 --- a/drivers/media/pci/Kconfig +++ b/drivers/media/pci/Kconfig @@ -61,7 +61,7 @@ config VIDEO_PCI_SKELETON tristate "Skeleton PCI V4L2 driver" depends on SAMPLES depends on MEDIA_TEST_SUPPORT - depends on PCI && VIDEO_V4L2 + depends on PCI && VIDEO_DEV select VIDEOBUF2_MEMOPS select VIDEOBUF2_DMA_CONTIG help diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig index 3f56decbb681..927190281bd5 100644 --- a/drivers/media/pci/bt8xx/Kconfig +++ b/drivers/media/pci/bt8xx/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_BT848 tristate "BT848 Video For Linux" - depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 + depends on PCI && I2C && VIDEO_DEV select I2C_ALGOBIT select VIDEOBUF_DMA_SG depends on RC_CORE diff --git a/drivers/media/pci/cobalt/Kconfig b/drivers/media/pci/cobalt/Kconfig index d8d9ea6b09bc..e13e36141199 100644 --- a/drivers/media/pci/cobalt/Kconfig +++ b/drivers/media/pci/cobalt/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_COBALT tristate "Cisco Cobalt support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on PCI_MSI && MTD_COMPLEX_MAPPINGS depends on (GPIOLIB && DRM_I2C_ADV7511=n) || COMPILE_TEST depends on SND diff --git a/drivers/media/pci/cx18/Kconfig b/drivers/media/pci/cx18/Kconfig index 7074a1071302..a4e32fdcfd3d 100644 --- a/drivers/media/pci/cx18/Kconfig +++ b/drivers/media/pci/cx18/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_CX18 tristate "Conexant cx23418 MPEG encoder support" - depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C + depends on VIDEO_DEV && DVB_CORE && PCI && I2C select I2C_ALGOBIT select VIDEOBUF_VMALLOC depends on RC_CORE diff --git a/drivers/media/pci/dt3155/Kconfig b/drivers/media/pci/dt3155/Kconfig index a3d24b8a719b..2b76de195aa5 100644 --- a/drivers/media/pci/dt3155/Kconfig +++ b/drivers/media/pci/dt3155/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_DT3155 tristate "DT3155 frame grabber" - depends on PCI && VIDEO_DEV && VIDEO_V4L2 + depends on PCI && VIDEO_DEV select VIDEOBUF2_DMA_CONTIG help Enables dt3155 device driver for the DataTranslation DT3155 frame grabber. diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig index dce8274c81e6..39bd3be0b43d 100644 --- a/drivers/media/pci/intel/ipu3/Kconfig +++ b/drivers/media/pci/intel/ipu3/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_IPU3_CIO2 tristate "Intel ipu3-cio2 driver" - depends on VIDEO_V4L2 && PCI + depends on VIDEO_DEV && PCI depends on ACPI || COMPILE_TEST depends on X86 select MEDIA_CONTROLLER diff --git a/drivers/media/pci/ivtv/Kconfig b/drivers/media/pci/ivtv/Kconfig index e70502902b73..9be52101bc4f 100644 --- a/drivers/media/pci/ivtv/Kconfig +++ b/drivers/media/pci/ivtv/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_IVTV tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support" - depends on VIDEO_V4L2 && PCI && I2C + depends on VIDEO_DEV && PCI && I2C select I2C_ALGOBIT depends on RC_CORE select VIDEO_TUNER diff --git a/drivers/media/pci/meye/Kconfig b/drivers/media/pci/meye/Kconfig index fed1f4a01817..3e69b66f1a5b 100644 --- a/drivers/media/pci/meye/Kconfig +++ b/drivers/media/pci/meye/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" - depends on PCI && VIDEO_V4L2 + depends on PCI && VIDEO_DEV depends on SONY_LAPTOP depends on X86 || COMPILE_TEST help diff --git a/drivers/media/pci/saa7146/Kconfig b/drivers/media/pci/saa7146/Kconfig index 8e83cd044075..3bbb68a0ed7b 100644 --- a/drivers/media/pci/saa7146/Kconfig +++ b/drivers/media/pci/saa7146/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_HEXIUM_GEMINI tristate "Hexium Gemini frame grabber" - depends on PCI && VIDEO_V4L2 && I2C + depends on PCI && VIDEO_DEV && I2C select VIDEO_SAA7146_VV help This is a video4linux driver for the Hexium Gemini frame @@ -13,7 +13,7 @@ config VIDEO_HEXIUM_GEMINI config VIDEO_HEXIUM_ORION tristate "Hexium HV-PCI6 and Orion frame grabber" - depends on PCI && VIDEO_V4L2 && I2C + depends on PCI && VIDEO_DEV && I2C select VIDEO_SAA7146_VV help This is a video4linux driver for the Hexium HV-PCI6 and @@ -24,7 +24,7 @@ config VIDEO_HEXIUM_ORION config VIDEO_MXB tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" - depends on PCI && VIDEO_V4L2 && I2C + depends on PCI && VIDEO_DEV && I2C select VIDEO_SAA7146_VV select VIDEO_TUNER select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT diff --git a/drivers/media/pci/sta2x11/Kconfig b/drivers/media/pci/sta2x11/Kconfig index 27bb78513631..a96e170ab04e 100644 --- a/drivers/media/pci/sta2x11/Kconfig +++ b/drivers/media/pci/sta2x11/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config STA2X11_VIP tristate "STA2X11 VIP Video For Linux" - depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS && I2C + depends on PCI && VIDEO_DEV && VIRT_TO_BUS && I2C depends on STA2X11 || COMPILE_TEST select GPIOLIB if MEDIA_SUBDRV_AUTOSELECT select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT diff --git a/drivers/media/pci/tw5864/Kconfig b/drivers/media/pci/tw5864/Kconfig index d376d4ed65b9..0a0f3191f238 100644 --- a/drivers/media/pci/tw5864/Kconfig +++ b/drivers/media/pci/tw5864/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_TW5864 tristate "Techwell TW5864 video/audio grabber and encoder" - depends on VIDEO_DEV && PCI && VIDEO_V4L2 + depends on VIDEO_DEV && PCI && VIDEO_DEV select VIDEOBUF2_DMA_CONTIG help Support for boards based on Techwell TW5864 chip which provides diff --git a/drivers/media/pci/tw68/Kconfig b/drivers/media/pci/tw68/Kconfig index af0cb60337bb..ef29be7db493 100644 --- a/drivers/media/pci/tw68/Kconfig +++ b/drivers/media/pci/tw68/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_TW68 tristate "Techwell tw68x Video For Linux" - depends on VIDEO_DEV && PCI && VIDEO_V4L2 + depends on VIDEO_DEV && PCI && VIDEO_DEV select VIDEOBUF2_DMA_SG help Support for Techwell tw68xx based frame grabber boards. diff --git a/drivers/media/pci/tw686x/Kconfig b/drivers/media/pci/tw686x/Kconfig index 631c90868b8b..a4edad6aaf89 100644 --- a/drivers/media/pci/tw686x/Kconfig +++ b/drivers/media/pci/tw686x/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_TW686X tristate "Intersil/Techwell TW686x video capture cards" - depends on PCI && VIDEO_DEV && VIDEO_V4L2 && SND + depends on PCI && VIDEO_DEV && SND select VIDEOBUF2_VMALLOC select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_DMA_SG diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 721f27ef0130..f15ab9739823 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -30,7 +30,7 @@ config DVB_PLATFORM_DRIVERS config V4L_MEM2MEM_DRIVERS bool "Memory-to-memory multimedia devices" - depends on VIDEO_V4L2 + depends on VIDEO_DEV help Say Y here to enable selecting drivers for V4L devices that use system memory for both source and destination buffers, as opposed @@ -42,7 +42,7 @@ config V4L_MEM2MEM_DRIVERS config VIDEO_MEM2MEM_DEINTERLACE tristate "Deinterlace support" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV @@ -53,7 +53,7 @@ config VIDEO_MUX tristate "Video Multiplexer" depends on V4L_PLATFORM_DRIVERS select MULTIPLEXER - depends on VIDEO_V4L2 && OF + depends on VIDEO_DEV && OF select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select REGMAP diff --git a/drivers/media/platform/allegro-dvt/Kconfig b/drivers/media/platform/allegro-dvt/Kconfig index dd528e9d0958..c3f76a6fb6f8 100644 --- a/drivers/media/platform/allegro-dvt/Kconfig +++ b/drivers/media/platform/allegro-dvt/Kconfig @@ -2,7 +2,7 @@ config VIDEO_ALLEGRO_DVT tristate "Allegro DVT Video IP Core" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_ZYNQMP || COMPILE_TEST select V4L2_MEM2MEM_DEV select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/media/platform/am437x/Kconfig b/drivers/media/platform/am437x/Kconfig index 619cefca7590..2e24fff7e625 100644 --- a/drivers/media/platform/am437x/Kconfig +++ b/drivers/media/platform/am437x/Kconfig @@ -2,7 +2,7 @@ config VIDEO_AM437X_VPFE tristate "TI AM437x VPFE video capture driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on SOC_AM43XX || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/platform/amphion/Kconfig b/drivers/media/platform/amphion/Kconfig index 13899649f766..e9ddca7a9e4a 100644 --- a/drivers/media/platform/amphion/Kconfig +++ b/drivers/media/platform/amphion/Kconfig @@ -5,7 +5,7 @@ config VIDEO_AMPHION_VPU depends on ARCH_MXC || COMPILE_TEST depends on MEDIA_SUPPORT depends on VIDEO_DEV - depends on VIDEO_V4L2 + depends on VIDEO_DEV select MEDIA_CONTROLLER select V4L2_MEM2MEM_DEV select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/media/platform/aspeed/Kconfig b/drivers/media/platform/aspeed/Kconfig index 5025e892844c..810902c8a85a 100644 --- a/drivers/media/platform/aspeed/Kconfig +++ b/drivers/media/platform/aspeed/Kconfig @@ -2,7 +2,7 @@ config VIDEO_ASPEED tristate "Aspeed AST2400 and AST2500 Video Engine driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_DMA_CONTIG help Support for the Aspeed Video Engine (VE) embedded in the Aspeed diff --git a/drivers/media/platform/atmel/Kconfig b/drivers/media/platform/atmel/Kconfig index 5122290729ae..abeb0ac595b3 100644 --- a/drivers/media/platform/atmel/Kconfig +++ b/drivers/media/platform/atmel/Kconfig @@ -2,7 +2,7 @@ config VIDEO_ATMEL_ISC tristate "ATMEL Image Sensor Controller (ISC) support" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && COMMON_CLK + depends on VIDEO_DEV && COMMON_CLK depends on ARCH_AT91 || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -17,7 +17,7 @@ config VIDEO_ATMEL_ISC config VIDEO_ATMEL_XISC tristate "ATMEL eXtended Image Sensor Controller (XISC) support" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_DEV && COMMON_CLK && VIDEO_V4L2_SUBDEV_API depends on ARCH_AT91 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select REGMAP_MMIO @@ -36,7 +36,7 @@ config VIDEO_ATMEL_ISC_BASE config VIDEO_ATMEL_ISI tristate "ATMEL Image Sensor Interface (ISI) support" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && OF + depends on VIDEO_DEV && OF depends on ARCH_AT91 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE @@ -47,7 +47,7 @@ config VIDEO_ATMEL_ISI config VIDEO_MICROCHIP_CSI2DC tristate "Microchip CSI2 Demux Controller" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && COMMON_CLK && OF + depends on VIDEO_DEV && COMMON_CLK && OF depends on ARCH_AT91 || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/platform/cadence/Kconfig b/drivers/media/platform/cadence/Kconfig index 79a7e9fb2575..acfa0ef6247e 100644 --- a/drivers/media/platform/cadence/Kconfig +++ b/drivers/media/platform/cadence/Kconfig @@ -13,7 +13,7 @@ if VIDEO_CADENCE config VIDEO_CADENCE_CSI2RX tristate "Cadence MIPI-CSI2 RX Controller" - depends on VIDEO_V4L2 + depends on VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE @@ -25,7 +25,7 @@ config VIDEO_CADENCE_CSI2RX config VIDEO_CADENCE_CSI2TX tristate "Cadence MIPI-CSI2 TX Controller" - depends on VIDEO_V4L2 + depends on VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE diff --git a/drivers/media/platform/coda/Kconfig b/drivers/media/platform/coda/Kconfig index ae495fd7b25a..22b654018f3c 100644 --- a/drivers/media/platform/coda/Kconfig +++ b/drivers/media/platform/coda/Kconfig @@ -2,7 +2,7 @@ config VIDEO_CODA tristate "Chips&Media Coda multi-standard codec IP" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 && OF && (ARCH_MXC || COMPILE_TEST) + depends on VIDEO_DEV && OF && (ARCH_MXC || COMPILE_TEST) select SRAM select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_VMALLOC diff --git a/drivers/media/platform/davinci/Kconfig b/drivers/media/platform/davinci/Kconfig index 7e5f92b0082a..c61e697aeb12 100644 --- a/drivers/media/platform/davinci/Kconfig +++ b/drivers/media/platform/davinci/Kconfig @@ -2,7 +2,7 @@ config VIDEO_DAVINCI_VPIF_DISPLAY tristate "TI DaVinci VPIF V4L2-Display driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_DAVINCI || COMPILE_TEST depends on I2C select VIDEOBUF2_DMA_CONTIG @@ -19,7 +19,7 @@ config VIDEO_DAVINCI_VPIF_DISPLAY config VIDEO_DAVINCI_VPIF_CAPTURE tristate "TI DaVinci VPIF video capture driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_DAVINCI || COMPILE_TEST depends on I2C select VIDEOBUF2_DMA_CONTIG @@ -35,7 +35,7 @@ config VIDEO_DAVINCI_VPIF_CAPTURE config VIDEO_DM6446_CCDC tristate "TI DM6446 CCDC video capture driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_DAVINCI || COMPILE_TEST depends on I2C select VIDEOBUF_DMA_CONTIG @@ -52,7 +52,7 @@ config VIDEO_DM6446_CCDC config VIDEO_DM355_CCDC tristate "TI DM355 CCDC video capture driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_DAVINCI || COMPILE_TEST depends on I2C select VIDEOBUF_DMA_CONTIG @@ -69,7 +69,7 @@ config VIDEO_DM355_CCDC config VIDEO_DM365_ISIF tristate "TI DM365 ISIF video capture driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_DAVINCI || COMPILE_TEST depends on I2C select VIDEOBUF_DMA_CONTIG @@ -84,7 +84,7 @@ config VIDEO_DM365_ISIF config VIDEO_DAVINCI_VPBE_DISPLAY tristate "TI DaVinci VPBE V4L2-Display driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_DAVINCI || COMPILE_TEST depends on I2C select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/media/platform/exynos-gsc/Kconfig b/drivers/media/platform/exynos-gsc/Kconfig index f9bdffe915b4..7244d63c9646 100644 --- a/drivers/media/platform/exynos-gsc/Kconfig +++ b/drivers/media/platform/exynos-gsc/Kconfig @@ -2,7 +2,7 @@ config VIDEO_SAMSUNG_EXYNOS_GSC tristate "Samsung Exynos G-Scaler driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_EXYNOS || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index 868bb86c7699..da33faa7132e 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -3,7 +3,7 @@ config VIDEO_SAMSUNG_EXYNOS4_IS tristate "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && OF && COMMON_CLK + depends on VIDEO_DEV && OF && COMMON_CLK depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/platform/intel/Kconfig b/drivers/media/platform/intel/Kconfig index aeda421f7248..d47a2cf6f334 100644 --- a/drivers/media/platform/intel/Kconfig +++ b/drivers/media/platform/intel/Kconfig @@ -2,7 +2,7 @@ config VIDEO_PXA27x tristate "PXA27x Quick Capture Interface driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on PXA27x || COMPILE_TEST select VIDEOBUF2_DMA_SG select SG_SPLIT diff --git a/drivers/media/platform/marvell-ccic/Kconfig b/drivers/media/platform/marvell-ccic/Kconfig index bfe655b2cedd..474795668930 100644 --- a/drivers/media/platform/marvell-ccic/Kconfig +++ b/drivers/media/platform/marvell-ccic/Kconfig @@ -2,7 +2,7 @@ config VIDEO_CAFE_CCIC tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support" depends on V4L_PLATFORM_DRIVERS - depends on PCI && I2C && VIDEO_V4L2 + depends on PCI && I2C && VIDEO_DEV depends on COMMON_CLK select VIDEO_OV7670 select VIDEOBUF2_VMALLOC @@ -16,7 +16,7 @@ config VIDEO_CAFE_CCIC config VIDEO_MMP_CAMERA tristate "Marvell Armada 610 integrated camera controller support" depends on V4L_PLATFORM_DRIVERS - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV depends on ARCH_MMP || COMPILE_TEST depends on COMMON_CLK select VIDEO_OV7670 diff --git a/drivers/media/platform/meson/ge2d/Kconfig b/drivers/media/platform/meson/ge2d/Kconfig index 8c3f3b1b6b05..312c4169e3c2 100644 --- a/drivers/media/platform/meson/ge2d/Kconfig +++ b/drivers/media/platform/meson/ge2d/Kconfig @@ -1,7 +1,7 @@ config VIDEO_MESON_GE2D tristate "Amlogic 2D Graphic Acceleration Unit" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_MESON || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/mtk-jpeg/Kconfig b/drivers/media/platform/mtk-jpeg/Kconfig index 72ed920b011a..39c4d1bc66ce 100644 --- a/drivers/media/platform/mtk-jpeg/Kconfig +++ b/drivers/media/platform/mtk-jpeg/Kconfig @@ -3,7 +3,7 @@ config VIDEO_MEDIATEK_JPEG tristate "Mediatek JPEG Codec driver" depends on V4L_MEM2MEM_DRIVERS depends on MTK_IOMMU_V1 || MTK_IOMMU || COMPILE_TEST - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_MEDIATEK || COMPILE_TEST depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n) select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/media/platform/mtk-mdp/Kconfig b/drivers/media/platform/mtk-mdp/Kconfig index 0cc743165a1a..9f13a42899bd 100644 --- a/drivers/media/platform/mtk-mdp/Kconfig +++ b/drivers/media/platform/mtk-mdp/Kconfig @@ -3,7 +3,7 @@ config VIDEO_MEDIATEK_MDP tristate "Mediatek MDP driver" depends on V4L_MEM2MEM_DRIVERS depends on MTK_IOMMU || COMPILE_TEST - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_MEDIATEK || COMPILE_TEST depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n) select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/media/platform/mtk-vcodec/Kconfig b/drivers/media/platform/mtk-vcodec/Kconfig index 635801a19d55..c5c76753c626 100644 --- a/drivers/media/platform/mtk-vcodec/Kconfig +++ b/drivers/media/platform/mtk-vcodec/Kconfig @@ -9,7 +9,7 @@ config VIDEO_MEDIATEK_VCODEC tristate "Mediatek Video Codec driver" depends on V4L_MEM2MEM_DRIVERS depends on MTK_IOMMU || COMPILE_TEST - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_MEDIATEK || COMPILE_TEST depends on VIDEO_MEDIATEK_VPU || MTK_SCP # The two following lines ensure we have the same state ("m" or "y") as diff --git a/drivers/media/platform/mtk-vpu/Kconfig b/drivers/media/platform/mtk-vpu/Kconfig index df679ea79ed0..2a8443a93ce0 100644 --- a/drivers/media/platform/mtk-vpu/Kconfig +++ b/drivers/media/platform/mtk-vpu/Kconfig @@ -3,7 +3,7 @@ config VIDEO_MEDIATEK_VPU tristate "Mediatek Video Processor Unit" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_MEDIATEK || COMPILE_TEST help This driver provides downloading VPU firmware and diff --git a/drivers/media/platform/nxp/Kconfig b/drivers/media/platform/nxp/Kconfig index df52d32ebe50..af5cd4eb6bf3 100644 --- a/drivers/media/platform/nxp/Kconfig +++ b/drivers/media/platform/nxp/Kconfig @@ -6,7 +6,7 @@ menuconfig VIDEO_IMX bool "V4L2 capture drivers for NXP i.MX devices" depends on V4L_PLATFORM_DRIVERS depends on ARCH_MXC || COMPILE_TEST - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV help Say yes here to enable support for capture drivers on i.MX SoCs. Support for the single SoC features are selectable in the sub-menu @@ -29,7 +29,7 @@ endif # VIDEO_IMX config VIDEO_VIU tristate "Freescale/NXP VIU Video Driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && (PPC_MPC512x || COMPILE_TEST) && I2C + depends on VIDEO_DEV && (PPC_MPC512x || COMPILE_TEST) && I2C select VIDEOBUF_DMA_CONTIG default y help @@ -44,7 +44,7 @@ config VIDEO_VIU config VIDEO_IMX_PXP tristate "i.MX Pixel Pipeline (PXP)" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST) + depends on VIDEO_DEV && (ARCH_MXC || COMPILE_TEST) select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help @@ -54,7 +54,7 @@ config VIDEO_IMX_PXP config VIDEO_MX2_EMMAPRP tristate "Freescale/NXP MX2 eMMa-PrP support" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on SOC_IMX27 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/nxp/imx-jpeg/Kconfig b/drivers/media/platform/nxp/imx-jpeg/Kconfig index cbf6101a8b1d..5214dcd7fab5 100644 --- a/drivers/media/platform/nxp/imx-jpeg/Kconfig +++ b/drivers/media/platform/nxp/imx-jpeg/Kconfig @@ -3,7 +3,7 @@ config VIDEO_IMX8_JPEG tristate "IMX8 JPEG Encoder/Decoder" depends on V4L_MEM2MEM_DRIVERS depends on ARCH_MXC || COMPILE_TEST - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV select V4L2_JPEG_HELPER diff --git a/drivers/media/platform/omap/Kconfig b/drivers/media/platform/omap/Kconfig index 789d5e5686c7..a9dbe1097775 100644 --- a/drivers/media/platform/omap/Kconfig +++ b/drivers/media/platform/omap/Kconfig @@ -10,7 +10,7 @@ config VIDEO_OMAP2_VOUT depends on MMU depends on FB_OMAP2 || (COMPILE_TEST && FB_OMAP2=n) depends on ARCH_OMAP2 || ARCH_OMAP3 || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_DMA_CONTIG select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3 help diff --git a/drivers/media/platform/omap3isp/Kconfig b/drivers/media/platform/omap3isp/Kconfig index 85f0cf063153..f0a680938d5e 100644 --- a/drivers/media/platform/omap3isp/Kconfig +++ b/drivers/media/platform/omap3isp/Kconfig @@ -2,7 +2,7 @@ config VIDEO_OMAP3 tristate "OMAP 3 Camera support" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST depends on COMMON_CLK && OF select ARM_DMA_USE_IOMMU if OMAP_IOMMU diff --git a/drivers/media/platform/qcom/camss/Kconfig b/drivers/media/platform/qcom/camss/Kconfig index 56be91578706..4eda48cb1adf 100644 --- a/drivers/media/platform/qcom/camss/Kconfig +++ b/drivers/media/platform/qcom/camss/Kconfig @@ -1,7 +1,7 @@ config VIDEO_QCOM_CAMSS tristate "Qualcomm V4L2 Camera Subsystem driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/platform/qcom/venus/Kconfig b/drivers/media/platform/qcom/venus/Kconfig index de0fe3f7be5f..bfd50e8f3421 100644 --- a/drivers/media/platform/qcom/venus/Kconfig +++ b/drivers/media/platform/qcom/venus/Kconfig @@ -1,7 +1,7 @@ config VIDEO_QCOM_VENUS tristate "Qualcomm Venus V4L2 encoder/decoder driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 && QCOM_SMEM + depends on VIDEO_DEV && QCOM_SMEM depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST select QCOM_MDT_LOADER if ARCH_QCOM select QCOM_SCM diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig index e1329a60d3fa..0c0de21584ba 100644 --- a/drivers/media/platform/renesas/Kconfig +++ b/drivers/media/platform/renesas/Kconfig @@ -5,7 +5,7 @@ config VIDEO_RENESAS_CEU tristate "Renesas Capture Engine Unit (CEU) driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE @@ -15,7 +15,7 @@ config VIDEO_RENESAS_CEU config VIDEO_RCAR_ISP tristate "R-Car Image Signal Processor (ISP)" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && OF + depends on VIDEO_DEV && OF depends on ARCH_RENESAS || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -45,7 +45,7 @@ source "drivers/media/platform/renesas/rcar-vin/Kconfig" config VIDEO_RENESAS_FDP1 tristate "Renesas Fine Display Processor" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_RENESAS || COMPILE_TEST depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP select VIDEOBUF2_DMA_CONTIG @@ -60,7 +60,7 @@ config VIDEO_RENESAS_FDP1 config VIDEO_RENESAS_JPU tristate "Renesas JPEG Processing Unit" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_RENESAS || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV @@ -87,7 +87,7 @@ config VIDEO_RENESAS_FCP config VIDEO_RENESAS_VSP1 tristate "Renesas VSP1 Video Processing Engine" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_RENESAS || COMPILE_TEST depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP select MEDIA_CONTROLLER @@ -105,7 +105,7 @@ config VIDEO_RENESAS_VSP1 config VIDEO_RCAR_DRIF tristate "Renesas Digital Radio Interface (DRIF)" depends on SDR_PLATFORM_DRIVERS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_RENESAS || COMPILE_TEST select VIDEOBUF2_VMALLOC select V4L2_ASYNC diff --git a/drivers/media/platform/renesas/rcar-vin/Kconfig b/drivers/media/platform/renesas/rcar-vin/Kconfig index 34b7ea6f1246..de55fe63d84c 100644 --- a/drivers/media/platform/renesas/rcar-vin/Kconfig +++ b/drivers/media/platform/renesas/rcar-vin/Kconfig @@ -2,7 +2,7 @@ config VIDEO_RCAR_CSI2 tristate "R-Car MIPI CSI-2 Receiver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && OF + depends on VIDEO_DEV && OF depends on ARCH_RENESAS || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -18,7 +18,7 @@ config VIDEO_RCAR_CSI2 config VIDEO_RCAR_VIN tristate "R-Car Video Input (VIN) Driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && OF + depends on VIDEO_DEV && OF depends on ARCH_RENESAS || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/platform/rockchip/rga/Kconfig b/drivers/media/platform/rockchip/rga/Kconfig index 0106cc8a93a7..727a0f6ea466 100644 --- a/drivers/media/platform/rockchip/rga/Kconfig +++ b/drivers/media/platform/rockchip/rga/Kconfig @@ -1,7 +1,7 @@ config VIDEO_ROCKCHIP_RGA tristate "Rockchip Raster 2d Graphic Acceleration Unit" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_ROCKCHIP || COMPILE_TEST select VIDEOBUF2_DMA_SG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/rockchip/rkisp1/Kconfig b/drivers/media/platform/rockchip/rkisp1/Kconfig index c2e464317929..dabd7e42c193 100644 --- a/drivers/media/platform/rockchip/rkisp1/Kconfig +++ b/drivers/media/platform/rockchip/rkisp1/Kconfig @@ -2,7 +2,7 @@ config VIDEO_ROCKCHIP_ISP1 tristate "Rockchip Image Signal Processing v1 Unit driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && OF + depends on VIDEO_DEV && OF depends on ARCH_ROCKCHIP || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/platform/s3c-camif/Kconfig b/drivers/media/platform/s3c-camif/Kconfig index e8ef9e06dc1b..8cb8d1ac3edc 100644 --- a/drivers/media/platform/s3c-camif/Kconfig +++ b/drivers/media/platform/s3c-camif/Kconfig @@ -2,7 +2,7 @@ config VIDEO_S3C_CAMIF tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && I2C && PM + depends on VIDEO_DEV && I2C && PM depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/platform/s5p-g2d/Kconfig b/drivers/media/platform/s5p-g2d/Kconfig index 9bc9d90a666a..28ab88fc2d7c 100644 --- a/drivers/media/platform/s5p-g2d/Kconfig +++ b/drivers/media/platform/s5p-g2d/Kconfig @@ -1,7 +1,7 @@ config VIDEO_SAMSUNG_S5P_G2D tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/s5p-jpeg/Kconfig b/drivers/media/platform/s5p-jpeg/Kconfig index e522860d2b15..11f6e99dec39 100644 --- a/drivers/media/platform/s5p-jpeg/Kconfig +++ b/drivers/media/platform/s5p-jpeg/Kconfig @@ -3,7 +3,7 @@ config VIDEO_SAMSUNG_S5P_JPEG tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/s5p-mfc/Kconfig b/drivers/media/platform/s5p-mfc/Kconfig index 34b52b0de304..7ee3b0c8d98b 100644 --- a/drivers/media/platform/s5p-mfc/Kconfig +++ b/drivers/media/platform/s5p-mfc/Kconfig @@ -2,7 +2,7 @@ config VIDEO_SAMSUNG_S5P_MFC tristate "Samsung S5P MFC Video Codec" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG help diff --git a/drivers/media/platform/sti/bdisp/Kconfig b/drivers/media/platform/sti/bdisp/Kconfig index e583fb924f52..496f8aedf0a4 100644 --- a/drivers/media/platform/sti/bdisp/Kconfig +++ b/drivers/media/platform/sti/bdisp/Kconfig @@ -2,7 +2,7 @@ config VIDEO_STI_BDISP tristate "STMicroelectronics BDISP 2D blitter driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_STI || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/sti/delta/Kconfig b/drivers/media/platform/sti/delta/Kconfig index 0bbc7edce208..efa936b1cc8a 100644 --- a/drivers/media/platform/sti/delta/Kconfig +++ b/drivers/media/platform/sti/delta/Kconfig @@ -2,7 +2,7 @@ config VIDEO_STI_DELTA tristate "STMicroelectronics DELTA multi-format video decoder V4L2 driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_STI || COMPILE_TEST help This V4L2 driver enables DELTA multi-format video decoder diff --git a/drivers/media/platform/sti/hva/Kconfig b/drivers/media/platform/sti/hva/Kconfig index a092a9b146f1..2107f934d883 100644 --- a/drivers/media/platform/sti/hva/Kconfig +++ b/drivers/media/platform/sti/hva/Kconfig @@ -2,7 +2,7 @@ config VIDEO_STI_HVA tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_STI || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/stm32/Kconfig b/drivers/media/platform/stm32/Kconfig index f4726010ca14..1a8a3fb98495 100644 --- a/drivers/media/platform/stm32/Kconfig +++ b/drivers/media/platform/stm32/Kconfig @@ -4,7 +4,7 @@ config VIDEO_STM32_DCMI tristate "STM32 Digital Camera Memory Interface (DCMI) support" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && OF + depends on VIDEO_DEV && OF depends on ARCH_STM32 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select MEDIA_CONTROLLER @@ -20,7 +20,7 @@ config VIDEO_STM32_DCMI config VIDEO_STM32_DMA2D tristate "STM32 Chrom-Art Accelerator (DMA2D)" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_STM32 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/sunxi/sun4i-csi/Kconfig b/drivers/media/platform/sunxi/sun4i-csi/Kconfig index 43ad2dd7da5d..7960e6836f41 100644 --- a/drivers/media/platform/sunxi/sun4i-csi/Kconfig +++ b/drivers/media/platform/sunxi/sun4i-csi/Kconfig @@ -3,7 +3,7 @@ config VIDEO_SUN4I_CSI tristate "Allwinner A10 CMOS Sensor Interface Support" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && COMMON_CLK && HAS_DMA + depends on VIDEO_DEV && COMMON_CLK && HAS_DMA depends on ARCH_SUNXI || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/platform/sunxi/sun6i-csi/Kconfig b/drivers/media/platform/sunxi/sun6i-csi/Kconfig index 6d9cf1963c41..0345901617d4 100644 --- a/drivers/media/platform/sunxi/sun6i-csi/Kconfig +++ b/drivers/media/platform/sunxi/sun6i-csi/Kconfig @@ -2,7 +2,7 @@ config VIDEO_SUN6I_CSI tristate "Allwinner V3s Camera Sensor Interface driver" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && COMMON_CLK && HAS_DMA + depends on VIDEO_DEV && COMMON_CLK && HAS_DMA depends on ARCH_SUNXI || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/platform/sunxi/sun8i-di/Kconfig b/drivers/media/platform/sunxi/sun8i-di/Kconfig index 8d762e664d45..ff71e06ee2df 100644 --- a/drivers/media/platform/sunxi/sun8i-di/Kconfig +++ b/drivers/media/platform/sunxi/sun8i-di/Kconfig @@ -2,7 +2,7 @@ config VIDEO_SUN8I_DEINTERLACE tristate "Allwinner Deinterlace driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_SUNXI || COMPILE_TEST depends on COMMON_CLK && OF depends on PM diff --git a/drivers/media/platform/sunxi/sun8i-rotate/Kconfig b/drivers/media/platform/sunxi/sun8i-rotate/Kconfig index 64a8ea76e917..cfba29072d75 100644 --- a/drivers/media/platform/sunxi/sun8i-rotate/Kconfig +++ b/drivers/media/platform/sunxi/sun8i-rotate/Kconfig @@ -3,7 +3,7 @@ config VIDEO_SUN8I_ROTATE tristate "Allwinner DE2 rotation driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on ARCH_SUNXI || COMPILE_TEST depends on COMMON_CLK && OF depends on PM diff --git a/drivers/media/platform/tegra/vde/Kconfig b/drivers/media/platform/tegra/vde/Kconfig index 584b78d8d66c..f7454823bbbb 100644 --- a/drivers/media/platform/tegra/vde/Kconfig +++ b/drivers/media/platform/tegra/vde/Kconfig @@ -2,7 +2,7 @@ config VIDEO_TEGRA_VDE tristate "NVIDIA Tegra Video Decoder Engine driver" depends on V4L_MEM2MEM_DRIVERS depends on ARCH_TEGRA || COMPILE_TEST - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV select DMA_SHARED_BUFFER select IOMMU_IOVA select MEDIA_CONTROLLER diff --git a/drivers/media/platform/ti-vpe/Kconfig b/drivers/media/platform/ti-vpe/Kconfig index a9ee0189f2f2..3cc644eab026 100644 --- a/drivers/media/platform/ti-vpe/Kconfig +++ b/drivers/media/platform/ti-vpe/Kconfig @@ -15,7 +15,7 @@ config VIDEO_TI_CSC config VIDEO_TI_CAL tristate "TI CAL (Camera Adaptation Layer) driver" - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on V4L_PLATFORM_DRIVERS select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API @@ -44,7 +44,7 @@ config VIDEO_TI_CAL_MC config VIDEO_TI_VPE tristate "TI VPE (Video Processing Engine) driver" depends on V4L_MEM2MEM_DRIVERS - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on SOC_DRA7XX || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/media/platform/via/Kconfig b/drivers/media/platform/via/Kconfig index 1dcf789dce96..a289f5c81b7c 100644 --- a/drivers/media/platform/via/Kconfig +++ b/drivers/media/platform/via/Kconfig @@ -2,7 +2,7 @@ config VIDEO_VIA_CAMERA tristate "VIAFB camera controller support" depends on V4L_PLATFORM_DRIVERS - depends on FB_VIA && VIDEO_V4L2 + depends on FB_VIA && VIDEO_DEV select VIDEOBUF2_DMA_SG select VIDEO_OV7670 help diff --git a/drivers/media/platform/xilinx/Kconfig b/drivers/media/platform/xilinx/Kconfig index a9531d5efd50..439120c45eb1 100644 --- a/drivers/media/platform/xilinx/Kconfig +++ b/drivers/media/platform/xilinx/Kconfig @@ -3,7 +3,7 @@ config VIDEO_XILINX tristate "Xilinx Video IP (EXPERIMENTAL)" depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_V4L2 && OF && HAS_DMA + depends on VIDEO_DEV && OF && HAS_DMA select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index d29e29645e04..9b388e652633 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -5,13 +5,13 @@ menuconfig RADIO_ADAPTERS bool "Radio Adapters" - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on MEDIA_RADIO_SUPPORT default y help Say Y here to enable selecting AM/FM radio adapters. -if RADIO_ADAPTERS && VIDEO_V4L2 +if RADIO_ADAPTERS && VIDEO_DEV config RADIO_TEA575X tristate @@ -20,13 +20,13 @@ source "drivers/media/radio/si470x/Kconfig" config RADIO_SI4713 tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support" - depends on VIDEO_V4L2 + depends on VIDEO_DEV source "drivers/media/radio/si4713/Kconfig" config RADIO_SI476X tristate "Silicon Laboratories Si476x I2C FM Radio" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV depends on MFD_SI476X_CORE depends on SND_SOC select SND_SOC_SI476X @@ -43,7 +43,7 @@ config RADIO_SI476X config USB_MR800 tristate "AverMedia MR 800 USB FM radio support" - depends on USB && VIDEO_V4L2 + depends on USB && VIDEO_DEV help Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and @@ -55,7 +55,7 @@ config USB_MR800 config USB_DSBR tristate "D-Link/GemTek USB FM radio support" - depends on USB && VIDEO_V4L2 + depends on USB && VIDEO_DEV help Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and @@ -67,7 +67,7 @@ config USB_DSBR config RADIO_MAXIRADIO tristate "Guillemot MAXI Radio FM 2000 radio" - depends on VIDEO_V4L2 && PCI + depends on VIDEO_DEV && PCI select RADIO_TEA575X help Choose Y here if you have this radio card. This card may also be @@ -118,7 +118,7 @@ config RADIO_SHARK2 config USB_KEENE tristate "Keene FM Transmitter USB support" - depends on USB && VIDEO_V4L2 + depends on USB && VIDEO_DEV help Say Y here if you want to connect this type of FM transmitter to your computer's USB port. @@ -128,7 +128,7 @@ config USB_KEENE config USB_RAREMONO tristate "Thanko's Raremono AM/FM/SW radio support" - depends on USB && VIDEO_V4L2 + depends on USB && VIDEO_DEV help The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc. It is one of the very few or perhaps the only consumer USB radio device @@ -142,7 +142,7 @@ config USB_RAREMONO config USB_MA901 tristate "Masterkit MA901 USB FM radio support" - depends on USB && VIDEO_V4L2 + depends on USB && VIDEO_DEV help Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and @@ -154,7 +154,7 @@ config USB_MA901 config RADIO_TEA5764 tristate "TEA5764 I2C FM radio support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help Say Y here if you want to use the TEA5764 FM chip found in EZX phones. This FM chip is present in EZX phones from Motorola, @@ -173,7 +173,7 @@ config RADIO_TEA5764_XTAL config RADIO_SAA7706H tristate "SAA7706H Car Radio DSP" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help Say Y here if you want to use the SAA7706H Car radio Digital Signal Processor, found for instance on the Russellville development @@ -185,7 +185,7 @@ config RADIO_SAA7706H config RADIO_TEF6862 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help Say Y here if you want to use the TEF6862 Car Radio Enhanced Selectivity Tuner, found for instance on the Russellville development @@ -197,7 +197,7 @@ config RADIO_TEF6862 config RADIO_TIMBERDALE tristate "Enable the Timberdale radio driver" - depends on MFD_TIMBERDALE && VIDEO_V4L2 + depends on MFD_TIMBERDALE && VIDEO_DEV depends on I2C # for RADIO_SAA7706H select RADIO_TEF6862 select RADIO_SAA7706H @@ -208,7 +208,7 @@ config RADIO_TIMBERDALE config RADIO_WL1273 tristate "Texas Instruments WL1273 I2C FM Radio" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MFD_CORE select MFD_WL1273_CORE select FW_LOADER @@ -245,7 +245,7 @@ config RADIO_ISA config RADIO_CADET tristate "ADS Cadet AM/FM Tuner" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV help Choose Y here if you have one of these AM/FM radio cards, and then fill in the port address below. @@ -256,7 +256,7 @@ config RADIO_CADET config RADIO_RTRACK tristate "AIMSlab RadioTrack (aka RadioReveal) support" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select RADIO_ISA help Choose Y here if you have one of these FM radio cards, and then fill @@ -288,7 +288,7 @@ config RADIO_RTRACK_PORT config RADIO_RTRACK2 tristate "AIMSlab RadioTrack II support" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select RADIO_ISA help Choose Y here if you have this FM radio card, and then fill in the @@ -312,7 +312,7 @@ config RADIO_RTRACK2_PORT config RADIO_AZTECH tristate "Aztech/Packard Bell Radio" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select RADIO_ISA help Choose Y here if you have one of these FM radio cards, and then fill @@ -333,7 +333,7 @@ config RADIO_AZTECH_PORT config RADIO_GEMTEK tristate "GemTek Radio card (or compatible) support" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select RADIO_ISA help Choose Y here if you have this FM radio card, and then fill in the @@ -374,7 +374,7 @@ config RADIO_GEMTEK_PROBE config RADIO_MIROPCM20 tristate "miroSOUND PCM20 radio" depends on ISA || COMPILE_TEST - depends on ISA_DMA_API && VIDEO_V4L2 && SND + depends on ISA_DMA_API && VIDEO_DEV && SND select SND_ISA select SND_MIRO help @@ -389,7 +389,7 @@ config RADIO_MIROPCM20 config RADIO_SF16FMI tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV help Choose Y here if you have one of these FM radio cards. @@ -399,7 +399,7 @@ config RADIO_SF16FMI config RADIO_SF16FMR2 tristate "SF16-FMR2/SF16-FMD2 Radio" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select RADIO_TEA575X help Choose Y here if you have one of these FM radio cards. @@ -410,7 +410,7 @@ config RADIO_SF16FMR2 config RADIO_TERRATEC tristate "TerraTec ActiveRadio ISA Standalone" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select RADIO_ISA help Choose Y here if you have this FM radio card. @@ -425,7 +425,7 @@ config RADIO_TERRATEC config RADIO_TRUST tristate "Trust FM radio card" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select RADIO_ISA help This is a driver for the Trust FM radio cards. Say Y if you have @@ -449,7 +449,7 @@ config RADIO_TRUST_PORT config RADIO_TYPHOON tristate "Typhoon Radio (a.k.a. EcoRadio)" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select RADIO_ISA help Choose Y here if you have one of these FM radio cards, and then fill @@ -484,7 +484,7 @@ config RADIO_TYPHOON_MUTEFREQ config RADIO_ZOLTRIX tristate "Zoltrix Radio" depends on ISA || COMPILE_TEST - depends on VIDEO_V4L2 + depends on VIDEO_DEV select RADIO_ISA help Choose Y here if you have one of these FM radio cards, and then fill diff --git a/drivers/media/radio/si470x/Kconfig b/drivers/media/radio/si470x/Kconfig index 7161bd6cd13c..9f7d35b04a13 100644 --- a/drivers/media/radio/si470x/Kconfig +++ b/drivers/media/radio/si470x/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config RADIO_SI470X tristate "Silicon Labs Si470x FM Radio Receiver support" - depends on VIDEO_V4L2 + depends on VIDEO_DEV help This is a driver for devices with the Silicon Labs SI470x chip (either via USB or I2C buses). diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig index d5ae3388d3db..3e7713872e3f 100644 --- a/drivers/media/radio/wl128x/Kconfig +++ b/drivers/media/radio/wl128x/Kconfig @@ -4,7 +4,7 @@ # config RADIO_WL128X tristate "Texas Instruments WL128x FM Radio" - depends on VIDEO_V4L2 && RFKILL && TTY && TI_ST + depends on VIDEO_DEV && RFKILL && TTY && TI_ST depends on GPIOLIB || COMPILE_TEST help Choose Y here if you have this FM radio chip. diff --git a/drivers/media/spi/Kconfig b/drivers/media/spi/Kconfig index 857ef4ace6e9..01e4e6cce027 100644 --- a/drivers/media/spi/Kconfig +++ b/drivers/media/spi/Kconfig @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -if VIDEO_V4L2 +if VIDEO_DEV comment "SPI I2C drivers auto-selected by 'Autoselect ancillary drivers'" depends on MEDIA_HIDE_ANCILLARY_SUBDRV && SPI @@ -9,7 +9,7 @@ menu "SPI helper chips" config VIDEO_GS1662 tristate "Gennum Serializers video" - depends on SPI && VIDEO_V4L2 + depends on SPI && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API help diff --git a/drivers/media/test-drivers/Kconfig b/drivers/media/test-drivers/Kconfig index e27d6602545d..d663d822ec75 100644 --- a/drivers/media/test-drivers/Kconfig +++ b/drivers/media/test-drivers/Kconfig @@ -12,7 +12,7 @@ source "drivers/media/test-drivers/vivid/Kconfig" config VIDEO_VIM2M tristate "Virtual Memory-to-Memory Driver" - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_VMALLOC select V4L2_MEM2MEM_DEV select MEDIA_CONTROLLER diff --git a/drivers/media/test-drivers/vicodec/Kconfig b/drivers/media/test-drivers/vicodec/Kconfig index d77c67810c73..a7a828eec2a4 100644 --- a/drivers/media/test-drivers/vicodec/Kconfig +++ b/drivers/media/test-drivers/vicodec/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_VICODEC tristate "Virtual Codec Driver" - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_VMALLOC select V4L2_MEM2MEM_DEV select MEDIA_CONTROLLER diff --git a/drivers/media/test-drivers/vimc/Kconfig b/drivers/media/test-drivers/vimc/Kconfig index ea37a102dec8..0d5169819cac 100644 --- a/drivers/media/test-drivers/vimc/Kconfig +++ b/drivers/media/test-drivers/vimc/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_VIMC tristate "Virtual Media Controller Driver (VIMC)" - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV select FONT_SUPPORT select FONT_8x16 select MEDIA_CONTROLLER diff --git a/drivers/media/test-drivers/vivid/Kconfig b/drivers/media/test-drivers/vivid/Kconfig index c3abde2986b2..318799d317ba 100644 --- a/drivers/media/test-drivers/vivid/Kconfig +++ b/drivers/media/test-drivers/vivid/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_VIVID tristate "Virtual Video Test Driver" - depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FB + depends on VIDEO_DEV && !SPARC32 && !SPARC64 && FB depends on HAS_DMA select FONT_SUPPORT select FONT_8x16 diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig index 4605bb377574..81d1d56b9317 100644 --- a/drivers/media/tuners/Kconfig +++ b/drivers/media/tuners/Kconfig @@ -85,7 +85,7 @@ config MEDIA_TUNER_TEA5767 config MEDIA_TUNER_MSI001 tristate "Mirics MSi001" - depends on MEDIA_SUPPORT && SPI && VIDEO_V4L2 + depends on MEDIA_SUPPORT && SPI && VIDEO_DEV default m if !MEDIA_SUBDRV_AUTOSELECT help Mirics MSi001 silicon tuner driver. @@ -223,7 +223,7 @@ config MEDIA_TUNER_TDA18212 config MEDIA_TUNER_E4000 tristate "Elonics E4000 silicon tuner" - depends on MEDIA_SUPPORT && I2C && VIDEO_V4L2 + depends on MEDIA_SUPPORT && I2C && VIDEO_DEV select REGMAP_I2C default m if !MEDIA_SUBDRV_AUTOSELECT help @@ -231,7 +231,7 @@ config MEDIA_TUNER_E4000 config MEDIA_TUNER_FC2580 tristate "FCI FC2580 silicon tuner" - depends on MEDIA_SUPPORT && I2C && VIDEO_V4L2 + depends on MEDIA_SUPPORT && I2C && VIDEO_DEV select REGMAP_I2C default m if !MEDIA_SUBDRV_AUTOSELECT help diff --git a/drivers/media/tuners/e4000.c b/drivers/media/tuners/e4000.c index 3f1f9af92bc9..a3a8d051dc6c 100644 --- a/drivers/media/tuners/e4000.c +++ b/drivers/media/tuners/e4000.c @@ -257,7 +257,7 @@ static int e4000_set_params(struct e4000_dev *dev) /* * V4L2 API */ -#if IS_ENABLED(CONFIG_VIDEO_V4L2) +#if IS_ENABLED(CONFIG_VIDEO_DEV) static const struct v4l2_frequency_band bands[] = { { .type = V4L2_TUNER_RF, @@ -654,7 +654,7 @@ static int e4000_probe(struct i2c_client *client, if (ret) goto err_kfree; -#if IS_ENABLED(CONFIG_VIDEO_V4L2) +#if IS_ENABLED(CONFIG_VIDEO_DEV) /* Register controls */ v4l2_ctrl_handler_init(&dev->hdl, 9); dev->bandwidth_auto = v4l2_ctrl_new_std(&dev->hdl, &e4000_ctrl_ops, @@ -713,7 +713,7 @@ static int e4000_remove(struct i2c_client *client) dev_dbg(&client->dev, "\n"); -#if IS_ENABLED(CONFIG_VIDEO_V4L2) +#if IS_ENABLED(CONFIG_VIDEO_DEV) v4l2_ctrl_handler_free(&dev->hdl); #endif kfree(dev); diff --git a/drivers/media/tuners/fc2580.c b/drivers/media/tuners/fc2580.c index 7639a305048f..1b5961bdf2d5 100644 --- a/drivers/media/tuners/fc2580.c +++ b/drivers/media/tuners/fc2580.c @@ -357,7 +357,7 @@ static const struct dvb_tuner_ops fc2580_dvb_tuner_ops = { /* * V4L2 API */ -#if IS_ENABLED(CONFIG_VIDEO_V4L2) +#if IS_ENABLED(CONFIG_VIDEO_DEV) static const struct v4l2_frequency_band bands[] = { { .type = V4L2_TUNER_RF, @@ -552,7 +552,7 @@ static int fc2580_probe(struct i2c_client *client, goto err_kfree; } -#if IS_ENABLED(CONFIG_VIDEO_V4L2) +#if IS_ENABLED(CONFIG_VIDEO_DEV) /* Register controls */ v4l2_ctrl_handler_init(&dev->hdl, 2); dev->bandwidth_auto = v4l2_ctrl_new_std(&dev->hdl, &fc2580_ctrl_ops, @@ -594,7 +594,7 @@ static int fc2580_remove(struct i2c_client *client) dev_dbg(&client->dev, "\n"); -#if IS_ENABLED(CONFIG_VIDEO_V4L2) +#if IS_ENABLED(CONFIG_VIDEO_DEV) v4l2_ctrl_handler_free(&dev->hdl); #endif kfree(dev); diff --git a/drivers/media/usb/airspy/Kconfig b/drivers/media/usb/airspy/Kconfig index 458345217f78..0662d8701c44 100644 --- a/drivers/media/usb/airspy/Kconfig +++ b/drivers/media/usb/airspy/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_AIRSPY tristate "AirSpy" - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_VMALLOC help This is a video4linux2 driver for AirSpy SDR device. diff --git a/drivers/media/usb/au0828/Kconfig b/drivers/media/usb/au0828/Kconfig index 05cc6c48c26f..31799b6ff91f 100644 --- a/drivers/media/usb/au0828/Kconfig +++ b/drivers/media/usb/au0828/Kconfig @@ -2,12 +2,12 @@ config VIDEO_AU0828 tristate "Auvitek AU0828 support" - depends on I2C && INPUT && DVB_CORE && USB && VIDEO_V4L2 + depends on I2C && INPUT && DVB_CORE && USB && VIDEO_DEV select MEDIA_CONTROLLER select MEDIA_CONTROLLER_DVB select I2C_ALGOBIT select VIDEO_TVEEPROM - select VIDEOBUF2_VMALLOC if VIDEO_V4L2 + select VIDEOBUF2_VMALLOC if VIDEO_DEV select DVB_AU8522_DTV if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT @@ -22,7 +22,7 @@ config VIDEO_AU0828 config VIDEO_AU0828_V4L2 bool "Auvitek AU0828 v4l2 analog video support" depends on VIDEO_AU0828 - depends on VIDEO_V4L2=y || VIDEO_V4L2=VIDEO_AU0828 + depends on VIDEO_DEV=y || VIDEO_DEV=VIDEO_AU0828 select DVB_AU8522_V4L if MEDIA_SUBDRV_AUTOSELECT select VIDEO_TUNER default y diff --git a/drivers/media/usb/cpia2/Kconfig b/drivers/media/usb/cpia2/Kconfig index e2c18ab0262b..da2c6862b4a2 100644 --- a/drivers/media/usb/cpia2/Kconfig +++ b/drivers/media/usb/cpia2/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_CPIA2 tristate "CPiA2 Video For Linux" - depends on VIDEO_DEV && USB && VIDEO_V4L2 + depends on USB && VIDEO_DEV help This is the video4linux driver for cameras based on Vision's CPiA2 (Colour Processor Interface ASIC), such as the Digital Blue QX5 diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig index 60ca8b9d070b..a4600a97d1fd 100644 --- a/drivers/media/usb/dvb-usb-v2/Kconfig +++ b/drivers/media/usb/dvb-usb-v2/Kconfig @@ -40,7 +40,7 @@ config DVB_USB_AF9035 select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA18218 if MEDIA_SUBDRV_AUTOSELECT - select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_V4L2) + select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_DEV) select MEDIA_TUNER_IT913X if MEDIA_SUBDRV_AUTOSELECT help Say Y here to support the Afatech AF9035 based DVB USB receiver. @@ -139,12 +139,12 @@ config DVB_USB_RTL28XXU select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT select DVB_RTL2830 select DVB_RTL2832 - select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT && VIDEO_V4L2) + select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT && VIDEO_DEV) select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT - select MEDIA_TUNER_E4000 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_V4L2) + select MEDIA_TUNER_E4000 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_DEV) select MEDIA_TUNER_FC0012 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_FC0013 if MEDIA_SUBDRV_AUTOSELECT - select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_V4L2) + select MEDIA_TUNER_FC2580 if (MEDIA_SUBDRV_AUTOSELECT && VIDEO_DEV) select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig index 7498110142e4..6df96c2bf569 100644 --- a/drivers/media/usb/dvb-usb/Kconfig +++ b/drivers/media/usb/dvb-usb/Kconfig @@ -150,8 +150,8 @@ config DVB_USB_CXUSB config DVB_USB_CXUSB_ANALOG bool "Analog support for the Conexant USB2.0 hybrid reference design" - depends on DVB_USB_CXUSB && VIDEO_V4L2 - depends on VIDEO_V4L2=y || VIDEO_V4L2=DVB_USB_CXUSB + depends on DVB_USB_CXUSB && VIDEO_DEV + depends on VIDEO_DEV=y || VIDEO_DEV=DVB_USB_CXUSB select VIDEO_CX25840 select VIDEOBUF2_VMALLOC help diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig index dca4e16ed133..2b106a7fcf4c 100644 --- a/drivers/media/usb/gspca/Kconfig +++ b/drivers/media/usb/gspca/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig USB_GSPCA tristate "GSPCA based webcams" - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on INPUT || INPUT=n select VIDEOBUF2_VMALLOC help @@ -17,7 +17,7 @@ menuconfig USB_GSPCA module will be called gspca_main. -if USB_GSPCA && VIDEO_V4L2 +if USB_GSPCA && VIDEO_DEV source "drivers/media/usb/gspca/m5602/Kconfig" source "drivers/media/usb/gspca/stv06xx/Kconfig" @@ -25,7 +25,7 @@ source "drivers/media/usb/gspca/gl860/Kconfig" config USB_GSPCA_BENQ tristate "Benq USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for the Benq DC E300 camera. @@ -34,7 +34,7 @@ config USB_GSPCA_BENQ config USB_GSPCA_CONEX tristate "Conexant Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the Conexant chip. @@ -43,7 +43,7 @@ config USB_GSPCA_CONEX config USB_GSPCA_CPIA1 tristate "cpia CPiA (version 1) Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for USB cameras based on the cpia CPiA chip. Note that you need at least version 0.6.4 of libv4l for @@ -54,7 +54,7 @@ config USB_GSPCA_CPIA1 config USB_GSPCA_DTCS033 tristate "DTCS033 (Scopium) USB Astro-Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for the Scopium camera for planetary astrophotography. @@ -64,7 +64,7 @@ config USB_GSPCA_DTCS033 config USB_GSPCA_ETOMS tristate "Etoms USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the Etoms chip. @@ -73,7 +73,7 @@ config USB_GSPCA_ETOMS config USB_GSPCA_FINEPIX tristate "Fujifilm FinePix USB V4L2 driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the FinePix chip. @@ -82,7 +82,7 @@ config USB_GSPCA_FINEPIX config USB_GSPCA_JEILINJ tristate "Jeilin JPEG USB V4L2 driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on this Jeilin chip. @@ -91,7 +91,7 @@ config USB_GSPCA_JEILINJ config USB_GSPCA_JL2005BCD tristate "JL2005B/C/D USB V4L2 driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based the JL2005B, JL2005C, or JL2005D chip. @@ -101,7 +101,7 @@ config USB_GSPCA_JL2005BCD config USB_GSPCA_KINECT tristate "Kinect sensor device USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for the Microsoft Kinect sensor device. @@ -110,7 +110,7 @@ config USB_GSPCA_KINECT config USB_GSPCA_KONICA tristate "Konica USB Camera V4L2 driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the Konica chip. @@ -119,7 +119,7 @@ config USB_GSPCA_KONICA config USB_GSPCA_MARS tristate "Mars USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the Mars chip. @@ -128,7 +128,7 @@ config USB_GSPCA_MARS config USB_GSPCA_MR97310A tristate "Mars-Semi MR97310A USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the MR97310A chip. @@ -137,7 +137,7 @@ config USB_GSPCA_MR97310A config USB_GSPCA_NW80X tristate "Divio based (NW80x) USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the NW80x chips. @@ -146,7 +146,7 @@ config USB_GSPCA_NW80X config USB_GSPCA_OV519 tristate "OV51x / OVFX2 / W996xCF USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on one of these: OV511(+), OV518(+), OV519, OVFX2, W9967CF, W9968CF @@ -156,7 +156,7 @@ config USB_GSPCA_OV519 config USB_GSPCA_OV534 tristate "OV534 OV772x USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the OV534 chip and sensor OV772x (e.g. Sony Playstation EYE) @@ -166,7 +166,7 @@ config USB_GSPCA_OV534 config USB_GSPCA_OV534_9 tristate "OV534 OV965x USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the OV534 chip and sensor OV965x (e.g. Hercules Dualpix) @@ -176,7 +176,7 @@ config USB_GSPCA_OV534_9 config USB_GSPCA_PAC207 tristate "Pixart PAC207 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the PAC207 chip. @@ -185,7 +185,7 @@ config USB_GSPCA_PAC207 config USB_GSPCA_PAC7302 tristate "Pixart PAC7302 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the PAC7302 chip. @@ -194,7 +194,7 @@ config USB_GSPCA_PAC7302 config USB_GSPCA_PAC7311 tristate "Pixart PAC7311 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the PAC7311 chip. @@ -203,7 +203,7 @@ config USB_GSPCA_PAC7311 config USB_GSPCA_SE401 tristate "SE401 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the Endpoints (formerly known as AOX) se401 chip. @@ -213,7 +213,7 @@ config USB_GSPCA_SE401 config USB_GSPCA_SN9C2028 tristate "SONIX Dual-Mode USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want streaming support for Sonix SN9C2028 cameras. These are supported as stillcams in libgphoto2/camlibs/sonix. @@ -223,7 +223,7 @@ config USB_GSPCA_SN9C2028 config USB_GSPCA_SN9C20X tristate "SN9C20X USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the sn9c20x chips (SN9C201 and SN9C202). @@ -233,7 +233,7 @@ config USB_GSPCA_SN9C20X config USB_GSPCA_SONIXB tristate "SONIX Bayer USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the Sonix chips with Bayer format (SN9C101, SN9C102 and SN9C103). @@ -243,7 +243,7 @@ config USB_GSPCA_SONIXB config USB_GSPCA_SONIXJ tristate "SONIX JPEG USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the Sonix chips with JPEG format (SN9C102P, SN9C105 and >= SN9C110). @@ -253,7 +253,7 @@ config USB_GSPCA_SONIXJ config USB_GSPCA_SPCA500 tristate "SPCA500 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SPCA500 chip. @@ -262,7 +262,7 @@ config USB_GSPCA_SPCA500 config USB_GSPCA_SPCA501 tristate "SPCA501 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SPCA501 chip. @@ -271,7 +271,7 @@ config USB_GSPCA_SPCA501 config USB_GSPCA_SPCA505 tristate "SPCA505 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SPCA505 chip. @@ -280,7 +280,7 @@ config USB_GSPCA_SPCA505 config USB_GSPCA_SPCA506 tristate "SPCA506 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SPCA506 chip. @@ -289,7 +289,7 @@ config USB_GSPCA_SPCA506 config USB_GSPCA_SPCA508 tristate "SPCA508 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SPCA508 chip. @@ -298,7 +298,7 @@ config USB_GSPCA_SPCA508 config USB_GSPCA_SPCA561 tristate "SPCA561 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SPCA561 chip. @@ -307,7 +307,7 @@ config USB_GSPCA_SPCA561 config USB_GSPCA_SPCA1528 tristate "SPCA1528 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SPCA1528 chip. @@ -316,7 +316,7 @@ config USB_GSPCA_SPCA1528 config USB_GSPCA_SQ905 tristate "SQ Technologies SQ905 based USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SQ905 chip. @@ -325,7 +325,7 @@ config USB_GSPCA_SQ905 config USB_GSPCA_SQ905C tristate "SQ Technologies SQ905C based USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SQ905C chip. @@ -334,7 +334,7 @@ config USB_GSPCA_SQ905C config USB_GSPCA_SQ930X tristate "SQ Technologies SQ930X based USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the SQ930X chip. @@ -343,7 +343,7 @@ config USB_GSPCA_SQ930X config USB_GSPCA_STK014 tristate "Syntek DV4000 (STK014) USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the STK014 chip. @@ -352,7 +352,7 @@ config USB_GSPCA_STK014 config USB_GSPCA_STK1135 tristate "Syntek STK1135 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the STK1135 chip. @@ -361,7 +361,7 @@ config USB_GSPCA_STK1135 config USB_GSPCA_STV0680 tristate "STV0680 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the STV0680 chip. @@ -370,7 +370,7 @@ config USB_GSPCA_STV0680 config USB_GSPCA_SUNPLUS tristate "SUNPLUS USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the Sunplus SPCA504(abc) SPCA533 SPCA536 chips. @@ -380,7 +380,7 @@ config USB_GSPCA_SUNPLUS config USB_GSPCA_T613 tristate "T613 (JPEG Compliance) USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the T613 chip. @@ -389,7 +389,7 @@ config USB_GSPCA_T613 config USB_GSPCA_TOPRO tristate "TOPRO USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the TP6800 and TP6810 Topro chips. @@ -399,7 +399,7 @@ config USB_GSPCA_TOPRO config USB_GSPCA_TOUPTEK tristate "Touptek USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the ToupTek UCMOS / AmScope MU series camera. @@ -409,7 +409,7 @@ config USB_GSPCA_TOUPTEK config USB_GSPCA_TV8532 tristate "TV8532 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the TV8531 chip. @@ -418,7 +418,7 @@ config USB_GSPCA_TV8532 config USB_GSPCA_VC032X tristate "VC032X USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the VC032X chip. @@ -427,7 +427,7 @@ config USB_GSPCA_VC032X config USB_GSPCA_VICAM tristate "ViCam USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for the 3com homeconnect camera (vicam). @@ -437,7 +437,7 @@ config USB_GSPCA_VICAM config USB_GSPCA_XIRLINK_CIT tristate "Xirlink C-It USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for Xirlink C-It bases cameras. @@ -446,7 +446,7 @@ config USB_GSPCA_XIRLINK_CIT config USB_GSPCA_ZC3XX tristate "ZC3XX USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the ZC3XX chip. diff --git a/drivers/media/usb/gspca/gl860/Kconfig b/drivers/media/usb/gspca/gl860/Kconfig index 2dfd2704c915..e5a35ca72b60 100644 --- a/drivers/media/usb/gspca/gl860/Kconfig +++ b/drivers/media/usb/gspca/gl860/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_GL860 tristate "GL860 USB Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the GL860 chip. diff --git a/drivers/media/usb/gspca/m5602/Kconfig b/drivers/media/usb/gspca/m5602/Kconfig index 0a250652d717..d616408b67d9 100644 --- a/drivers/media/usb/gspca/m5602/Kconfig +++ b/drivers/media/usb/gspca/m5602/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_M5602 tristate "ALi USB m5602 Camera Driver" - depends on VIDEO_V4L2 && USB_GSPCA + depends on VIDEO_DEV && USB_GSPCA help Say Y here if you want support for cameras based on the ALi m5602 connected to various image sensors. diff --git a/drivers/media/usb/hackrf/Kconfig b/drivers/media/usb/hackrf/Kconfig index 2267cebfdecb..1cf9b4d3a514 100644 --- a/drivers/media/usb/hackrf/Kconfig +++ b/drivers/media/usb/hackrf/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_HACKRF tristate "HackRF" - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_VMALLOC help This is a video4linux2 driver for HackRF SDR device. diff --git a/drivers/media/usb/hdpvr/Kconfig b/drivers/media/usb/hdpvr/Kconfig index 617400b27314..ee45a89aa607 100644 --- a/drivers/media/usb/hdpvr/Kconfig +++ b/drivers/media/usb/hdpvr/Kconfig @@ -2,7 +2,7 @@ config VIDEO_HDPVR tristate "Hauppauge HD PVR support" - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV help This is a video4linux driver for Hauppauge's HD PVR USB device. diff --git a/drivers/media/usb/msi2500/Kconfig b/drivers/media/usb/msi2500/Kconfig index b403603bcc81..c2ded6482a5b 100644 --- a/drivers/media/usb/msi2500/Kconfig +++ b/drivers/media/usb/msi2500/Kconfig @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_MSI2500 tristate "Mirics MSi2500" - depends on VIDEO_V4L2 && SPI + depends on VIDEO_DEV && SPI select VIDEOBUF2_VMALLOC select MEDIA_TUNER_MSI001 diff --git a/drivers/media/usb/pvrusb2/Kconfig b/drivers/media/usb/pvrusb2/Kconfig index e6a4f730591b..f2b64e49c5a2 100644 --- a/drivers/media/usb/pvrusb2/Kconfig +++ b/drivers/media/usb/pvrusb2/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_PVRUSB2 tristate "Hauppauge WinTV-PVR USB2 support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEO_CX2341X diff --git a/drivers/media/usb/pwc/Kconfig b/drivers/media/usb/pwc/Kconfig index 7cebf6314a67..2078bd5ecf41 100644 --- a/drivers/media/usb/pwc/Kconfig +++ b/drivers/media/usb/pwc/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_PWC tristate "USB Philips Cameras" - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_VMALLOC help Say Y or M here if you want to use one of these Philips & OEM diff --git a/drivers/media/usb/s2255/Kconfig b/drivers/media/usb/s2255/Kconfig index e4a0c914d9c3..889593b21889 100644 --- a/drivers/media/usb/s2255/Kconfig +++ b/drivers/media/usb/s2255/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_S2255 tristate "USB Sensoray 2255 video capture device" - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_VMALLOC help Say Y here if you want support for the Sensoray 2255 USB device. diff --git a/drivers/media/usb/stkwebcam/Kconfig b/drivers/media/usb/stkwebcam/Kconfig index 775a5151539c..d94d023f1aa0 100644 --- a/drivers/media/usb/stkwebcam/Kconfig +++ b/drivers/media/usb/stkwebcam/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_STKWEBCAM tristate "USB Syntek DC1125 Camera support" - depends on VIDEO_V4L2 + depends on VIDEO_DEV help Say Y here if you want to use this type of camera. Supported devices are typically found in some Asus laptops, diff --git a/drivers/media/usb/usbtv/Kconfig b/drivers/media/usb/usbtv/Kconfig index 84799c7203d3..578a0e693f8b 100644 --- a/drivers/media/usb/usbtv/Kconfig +++ b/drivers/media/usb/usbtv/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config VIDEO_USBTV tristate "USBTV007 video capture support" - depends on VIDEO_V4L2 && SND + depends on VIDEO_DEV && SND select SND_PCM select VIDEOBUF2_VMALLOC diff --git a/drivers/media/usb/uvc/Kconfig b/drivers/media/usb/uvc/Kconfig index 4c2f4a3216f2..ca51ee8e45f3 100644 --- a/drivers/media/usb/uvc/Kconfig +++ b/drivers/media/usb/uvc/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_VIDEO_CLASS tristate "USB Video Class (UVC)" - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF2_VMALLOC help Support for the USB Video Class (UVC). Currently only video diff --git a/drivers/media/usb/zr364xx/Kconfig b/drivers/media/usb/zr364xx/Kconfig index 49b4257487bb..a9fb02566c4b 100644 --- a/drivers/media/usb/zr364xx/Kconfig +++ b/drivers/media/usb/zr364xx/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config USB_ZR364XX tristate "USB ZR364XX Camera support" - depends on VIDEO_V4L2 + depends on VIDEO_DEV select VIDEOBUF_GEN select VIDEOBUF_VMALLOC help diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig index 6ee75c6c820e..1be9a2cc947a 100644 --- a/drivers/media/v4l2-core/Kconfig +++ b/drivers/media/v4l2-core/Kconfig @@ -3,17 +3,9 @@ # Generic video config states # -# Enable the V4L2 core and API -config VIDEO_V4L2 - tristate - depends on (I2C || I2C=n) && VIDEO_DEV - select RATIONAL - select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE - default (I2C || I2C=n) && VIDEO_DEV - config VIDEO_V4L2_I2C bool - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV default y config VIDEO_V4L2_SUBDEV_API @@ -64,7 +56,7 @@ config V4L2_MEM2MEM_DEV # Used by LED subsystem flash drivers config V4L2_FLASH_LED_CLASS tristate "V4L2 flash API for LED flash class devices" - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_DEV && VIDEO_V4L2_SUBDEV_API depends on LEDS_CLASS_FLASH select V4L2_ASYNC help diff --git a/drivers/media/v4l2-core/Makefile b/drivers/media/v4l2-core/Makefile index 1ec7e9cae1fa..41d91bd10cf2 100644 --- a/drivers/media/v4l2-core/Makefile +++ b/drivers/media/v4l2-core/Makefile @@ -38,4 +38,4 @@ obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o obj-$(CONFIG_VIDEO_TUNER) += tuner.o -obj-$(CONFIG_VIDEO_V4L2) += v4l2-dv-timings.o videodev.o +obj-$(CONFIG_VIDEO_DEV) += v4l2-dv-timings.o videodev.o diff --git a/drivers/staging/media/atomisp/Kconfig b/drivers/staging/media/atomisp/Kconfig index aeed5803dfb1..2c8d7fdcc5f7 100644 --- a/drivers/staging/media/atomisp/Kconfig +++ b/drivers/staging/media/atomisp/Kconfig @@ -11,7 +11,7 @@ menuconfig INTEL_ATOMISP config VIDEO_ATOMISP tristate "Intel Atom Image Signal Processor Driver" - depends on VIDEO_V4L2 && INTEL_ATOMISP + depends on VIDEO_DEV && INTEL_ATOMISP depends on PMIC_OPREGION select IOSF_MBI select VIDEOBUF_VMALLOC diff --git a/drivers/staging/media/atomisp/i2c/Kconfig b/drivers/staging/media/atomisp/i2c/Kconfig index a772b833a85f..e726101b24e4 100644 --- a/drivers/staging/media/atomisp/i2c/Kconfig +++ b/drivers/staging/media/atomisp/i2c/Kconfig @@ -6,7 +6,7 @@ config VIDEO_ATOMISP_OV2722 tristate "OVT ov2722 sensor support" depends on ACPI - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor-level driver for the OVT OV2722 raw camera. @@ -18,7 +18,7 @@ config VIDEO_ATOMISP_OV2722 config VIDEO_ATOMISP_GC2235 tristate "Galaxy gc2235 sensor support" depends on ACPI - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor-level driver for the OVT GC2235 raw camera. @@ -40,7 +40,7 @@ config VIDEO_ATOMISP_MSRLIST_HELPER config VIDEO_ATOMISP_MT9M114 tristate "Aptina mt9m114 sensor support" depends on ACPI - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor-level driver for the Micron mt9m114 1.3 Mpixel camera. @@ -52,7 +52,7 @@ config VIDEO_ATOMISP_MT9M114 config VIDEO_ATOMISP_GC0310 tristate "GC0310 sensor support" depends on ACPI - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor-level driver for the Galaxycore GC0310 0.3MP sensor. @@ -60,7 +60,7 @@ config VIDEO_ATOMISP_GC0310 config VIDEO_ATOMISP_OV2680 tristate "Omnivision OV2680 sensor support" depends on ACPI - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor-level driver for the Omnivision OV2680 raw camera. @@ -72,7 +72,7 @@ config VIDEO_ATOMISP_OV2680 config VIDEO_ATOMISP_OV5693 tristate "Omnivision ov5693 sensor support" depends on ACPI - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV help This is a Video4Linux2 sensor-level driver for the Micron ov5693 5 Mpixel camera. @@ -88,7 +88,7 @@ config VIDEO_ATOMISP_OV5693 config VIDEO_ATOMISP_LM3554 tristate "LM3554 flash light driver" depends on ACPI - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C help This is a Video4Linux2 sub-dev driver for the LM3554 flash light driver. diff --git a/drivers/staging/media/hantro/Kconfig b/drivers/staging/media/hantro/Kconfig index 3c5d833322c8..0172a6822ec2 100644 --- a/drivers/staging/media/hantro/Kconfig +++ b/drivers/staging/media/hantro/Kconfig @@ -2,7 +2,7 @@ config VIDEO_HANTRO tristate "Hantro VPU driver" depends on ARCH_MXC || ARCH_ROCKCHIP || ARCH_AT91 || ARCH_SUNXI || COMPILE_TEST - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV select MEDIA_CONTROLLER select MEDIA_CONTROLLER_REQUEST_API select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig index c3bf433ba3e3..0bacac302d7e 100644 --- a/drivers/staging/media/imx/Kconfig +++ b/drivers/staging/media/imx/Kconfig @@ -4,7 +4,7 @@ config VIDEO_IMX_MEDIA depends on ARCH_MXC || COMPILE_TEST depends on HAS_DMA depends on VIDEO_DEV - depends on VIDEO_V4L2 + depends on VIDEO_DEV select MEDIA_CONTROLLER select V4L2_FWNODE select V4L2_MEM2MEM_DEV diff --git a/drivers/staging/media/ipu3/Kconfig b/drivers/staging/media/ipu3/Kconfig index 3e9640523e50..114a1d8e7cc8 100644 --- a/drivers/staging/media/ipu3/Kconfig +++ b/drivers/staging/media/ipu3/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 config VIDEO_IPU3_IMGU tristate "Intel ipu3-imgu driver" - depends on PCI && VIDEO_V4L2 + depends on PCI && VIDEO_DEV depends on X86 select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/staging/media/max96712/Kconfig b/drivers/staging/media/max96712/Kconfig index acde14fd5c4d..117fadf81bd0 100644 --- a/drivers/staging/media/max96712/Kconfig +++ b/drivers/staging/media/max96712/Kconfig @@ -3,7 +3,7 @@ config VIDEO_MAX96712 tristate "Maxim MAX96712 Quad GMSL2 Deserializer support" depends on I2C depends on OF_GPIO - depends on VIDEO_V4L2 + depends on VIDEO_DEV select V4L2_FWNODE select VIDEO_V4L2_SUBDEV_API select MEDIA_CONTROLLER diff --git a/drivers/staging/media/meson/vdec/Kconfig b/drivers/staging/media/meson/vdec/Kconfig index 9e1450193392..19ffea987b89 100644 --- a/drivers/staging/media/meson/vdec/Kconfig +++ b/drivers/staging/media/meson/vdec/Kconfig @@ -2,7 +2,7 @@ config VIDEO_MESON_VDEC tristate "Amlogic video decoder driver" - depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA + depends on VIDEO_DEV && HAS_DMA depends on ARCH_MESON || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig index 6c254907a27b..6d1f55b09132 100644 --- a/drivers/staging/media/omap4iss/Kconfig +++ b/drivers/staging/media/omap4iss/Kconfig @@ -2,7 +2,7 @@ config VIDEO_OMAP4 tristate "OMAP 4 Camera support" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_DEV && I2C depends on ARCH_OMAP4 || COMPILE_TEST select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API diff --git a/drivers/staging/media/rkvdec/Kconfig b/drivers/staging/media/rkvdec/Kconfig index dc7292f346fa..e963d60cc6ad 100644 --- a/drivers/staging/media/rkvdec/Kconfig +++ b/drivers/staging/media/rkvdec/Kconfig @@ -2,7 +2,7 @@ config VIDEO_ROCKCHIP_VDEC tristate "Rockchip Video Decoder driver" depends on ARCH_ROCKCHIP || COMPILE_TEST - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV select MEDIA_CONTROLLER select MEDIA_CONTROLLER_REQUEST_API select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/staging/media/sunxi/cedrus/Kconfig b/drivers/staging/media/sunxi/cedrus/Kconfig index da369950bbf2..21c13f9b6e33 100644 --- a/drivers/staging/media/sunxi/cedrus/Kconfig +++ b/drivers/staging/media/sunxi/cedrus/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 config VIDEO_SUNXI_CEDRUS tristate "Allwinner Cedrus VPU driver" - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV depends on HAS_DMA depends on OF select MEDIA_CONTROLLER diff --git a/drivers/staging/media/tegra-video/Kconfig b/drivers/staging/media/tegra-video/Kconfig index 1f35da4b134e..df1b2cff2417 100644 --- a/drivers/staging/media/tegra-video/Kconfig +++ b/drivers/staging/media/tegra-video/Kconfig @@ -2,7 +2,7 @@ config VIDEO_TEGRA tristate "NVIDIA Tegra VI driver" depends on TEGRA_HOST1X - depends on VIDEO_V4L2 + depends on VIDEO_DEV select MEDIA_CONTROLLER select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE diff --git a/drivers/staging/media/zoran/Kconfig b/drivers/staging/media/zoran/Kconfig index faef008b8554..3fb3e27e04a8 100644 --- a/drivers/staging/media/zoran/Kconfig +++ b/drivers/staging/media/zoran/Kconfig @@ -1,6 +1,6 @@ config VIDEO_ZORAN tristate "Zoran ZR36057/36067 Video For Linux (Deprecated)" - depends on PCI && I2C_ALGOBIT && VIDEO_V4L2 + depends on PCI && I2C_ALGOBIT && VIDEO_DEV depends on !ALPHA depends on DEBUG_FS select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/staging/most/video/Kconfig b/drivers/staging/most/video/Kconfig index e0964ca5e7b3..e16cc5e104b7 100644 --- a/drivers/staging/most/video/Kconfig +++ b/drivers/staging/most/video/Kconfig @@ -5,7 +5,7 @@ config MOST_VIDEO tristate "Video" - depends on VIDEO_V4L2 + depends on VIDEO_DEV help Say Y here if you want to commumicate via Video 4 Linux. diff --git a/drivers/staging/vc04_services/bcm2835-camera/Kconfig b/drivers/staging/vc04_services/bcm2835-camera/Kconfig index d0653d1ed3c7..dcda565f9b38 100644 --- a/drivers/staging/vc04_services/bcm2835-camera/Kconfig +++ b/drivers/staging/vc04_services/bcm2835-camera/Kconfig @@ -2,7 +2,7 @@ config VIDEO_BCM2835 tristate "BCM2835 Camera" depends on MEDIA_SUPPORT - depends on VIDEO_V4L2 && (ARCH_BCM2835 || COMPILE_TEST) + depends on VIDEO_DEV && (ARCH_BCM2835 || COMPILE_TEST) select BCM2835_VCHIQ select BCM2835_VCHIQ_MMAL select VIDEOBUF2_VMALLOC diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index dd58094f0b85..4fa2ddf322b4 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -448,7 +448,7 @@ config USB_CONFIGFS_F_HID config USB_CONFIGFS_F_UVC bool "USB Webcam function" depends on USB_CONFIGFS - depends on VIDEO_V4L2 + depends on VIDEO_DEV depends on VIDEO_DEV select VIDEOBUF2_DMA_SG select VIDEOBUF2_VMALLOC diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index de6668e58481..0a7b382fbe27 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -500,7 +500,7 @@ endif # or video class gadget drivers), or specific hardware, here. config USB_G_WEBCAM tristate "USB Webcam Gadget" - depends on VIDEO_V4L2 + depends on VIDEO_DEV select USB_LIBCOMPOSITE select VIDEOBUF2_DMA_SG select VIDEOBUF2_VMALLOC diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 41ce12597177..a55836225401 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -559,7 +559,7 @@ config SND_ES1968_RADIO bool "Enable TEA5757 radio tuner support for es1968" depends on SND_ES1968 depends on MEDIA_RADIO_SUPPORT - depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_ES1968 + depends on VIDEO_DEV=y || VIDEO_DEV=SND_ES1968 select RADIO_ADAPTERS select RADIO_TEA575X @@ -583,7 +583,7 @@ config SND_FM801_TEA575X_BOOL bool "ForteMedia FM801 + TEA5757 tuner" depends on SND_FM801 depends on MEDIA_RADIO_SUPPORT - depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801 + depends on VIDEO_DEV=y || VIDEO_DEV=SND_FM801 select RADIO_ADAPTERS select RADIO_TEA575X help -- 2.35.1

3 4

[PATCH 0/5] ASoC: mediatek: Add support for MT8195 sound card with max98390 and rt5682
by Trevor Wu 14 Mar '22

14 Mar '22

This series of patches adds support for mt8195 board with mt6359, max98390 and rt5682. Reset controller is included because mt8195 etdm is used to play sound via max98390 before kernel boot. In addition, the common part of machine driver is extracted for simplification. Patches are based on broonie tree "for-next" branch. Trevor Wu (5): ASoC: mediatek: mt8195: add reset controller dt-bindings: mediatek: mt8195: add reset property ASoC: mediatek: mt8195: common code for mt8195 machine driver ASoC: mediatek: mt8195: add machine driver with mt6359, max98390 and rt5682 dt-bindings: mediatek: mt8195: add mt8195-mt6359-max98390-rt5682 document .../bindings/sound/mt8195-afe-pcm.yaml | 10 + .../sound/mt8195-mt6359-max98390-rt5682.yaml | 61 + sound/soc/mediatek/Kconfig | 16 + sound/soc/mediatek/mt8195/Makefile | 17 +- sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 16 + .../mediatek/mt8195/mt8195-mt6359-common.c | 398 +++++++ .../mediatek/mt8195/mt8195-mt6359-common.h | 30 + .../mt8195/mt8195-mt6359-max98390-rt5682.c | 1058 +++++++++++++++++ .../mt8195/mt8195-mt6359-rt1011-rt5682.c | 406 +------ .../mt8195/mt8195-mt6359-rt1019-rt5682.c | 409 +------ 10 files changed, 1618 insertions(+), 803 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/mt8195-mt6359-max98390-rt5682.yaml create mode 100644 sound/soc/mediatek/mt8195/mt8195-mt6359-common.c create mode 100644 sound/soc/mediatek/mt8195/mt8195-mt6359-common.h create mode 100644 sound/soc/mediatek/mt8195/mt8195-mt6359-max98390-rt5682.c -- 2.18.0

4 15

[PATCH] ASoC: dt-bindings: Fix patternProperties with fixed strings
by Rob Herring 14 Mar '22

14 Mar '22

The simple-audio-card and renesas,rsnd bindings used 'patternProperties' with fixed strings to work-around a dtschema meta-schema limitation. This is now fixed and the schemas can be fixed to use 'properties' instead. Signed-off-by: Rob Herring <robh(a)kernel.org> --- .../bindings/sound/renesas,rsnd.yaml | 16 ++++--- .../bindings/sound/simple-card.yaml | 42 +++++++++---------- 2 files changed, 28 insertions(+), 30 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index c2930d65728e..e17c0245f77a 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -123,9 +123,7 @@ properties: $ref: audio-graph-port.yaml# unevaluatedProperties: false -# use patternProperties to avoid naming "xxx,yyy" issue -patternProperties: - "^rcar_sound,dvc$": + rcar_sound,dvc: description: DVC subnode. type: object patternProperties: @@ -141,7 +139,7 @@ patternProperties: - dma-names additionalProperties: false - "^rcar_sound,mix$": + rcar_sound,mix: description: MIX subnode. type: object patternProperties: @@ -150,7 +148,7 @@ patternProperties: # no properties additionalProperties: false - "^rcar_sound,ctu$": + rcar_sound,ctu: description: CTU subnode. type: object patternProperties: @@ -159,7 +157,7 @@ patternProperties: # no properties additionalProperties: false - "^rcar_sound,src$": + rcar_sound,src: description: SRC subnode. type: object patternProperties: @@ -182,7 +180,7 @@ patternProperties: - dma-names additionalProperties: false - "^rcar_sound,ssiu$": + rcar_sound,ssiu: description: SSIU subnode. type: object patternProperties: @@ -202,7 +200,7 @@ patternProperties: - dma-names additionalProperties: false - "^rcar_sound,ssi$": + rcar_sound,ssi: description: SSI subnode. type: object patternProperties: @@ -239,7 +237,7 @@ patternProperties: additionalProperties: false # For DAI base - "^rcar_sound,dai$": + rcar_sound,dai: description: DAI subnode. type: object patternProperties: diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index 45fd9fd9eb54..103044bd32eb 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -156,45 +156,45 @@ properties: description: User specified audio sound card name. $ref: /schemas/types.yaml#/definitions/string -# use patternProperties to avoid naming "xxx,yyy" issue -patternProperties: - "^simple-audio-card,widgets$": + simple-audio-card,widgets: $ref: "#/definitions/widgets" - "^simple-audio-card,routing$": + simple-audio-card,routing: $ref: "#/definitions/routing" - "^simple-audio-card,cpu(@[0-9a-f]+)?": - $ref: "#/definitions/dai" - "^simple-audio-card,codec(@[0-9a-f]+)?": - $ref: "#/definitions/dai" # common properties - "^simple-audio-card,frame-master$": + simple-audio-card,frame-master: $ref: "#/definitions/frame-master" - "^simple-audio-card,bitclock-master$": + simple-audio-card,bitclock-master: $ref: "#/definitions/bitclock-master" - "^simple-audio-card,frame-inversion$": + simple-audio-card,frame-inversion: $ref: "#/definitions/frame-inversion" - "^simple-audio-card,bitclock-inversion$": + simple-audio-card,bitclock-inversion: $ref: "#/definitions/bitclock-inversion" - "^simple-audio-card,format$": + simple-audio-card,format: $ref: "#/definitions/format" - "^simple-audio-card,mclk-fs$": + simple-audio-card,mclk-fs: $ref: "#/definitions/mclk-fs" - "^simple-audio-card,aux-devs$": + simple-audio-card,aux-devs: $ref: "#/definitions/aux-devs" - "^simple-audio-card,convert-rate$": + simple-audio-card,convert-rate: $ref: "#/definitions/convert-rate" - "^simple-audio-card,convert-channels$": + simple-audio-card,convert-channels: $ref: "#/definitions/convert-channels" - "^simple-audio-card,prefix$": + simple-audio-card,prefix: $ref: "#/definitions/prefix" - "^simple-audio-card,pin-switches$": + simple-audio-card,pin-switches: $ref: "#/definitions/pin-switches" - "^simple-audio-card,hp-det-gpio$": + simple-audio-card,hp-det-gpio: maxItems: 1 - "^simple-audio-card,mic-det-gpio$": + simple-audio-card,mic-det-gpio: maxItems: 1 +patternProperties: + "^simple-audio-card,cpu(@[0-9a-f]+)?$": + $ref: "#/definitions/dai" + "^simple-audio-card,codec(@[0-9a-f]+)?$": + $ref: "#/definitions/dai" + "^simple-audio-card,dai-link(@[0-9a-f]+)?$": description: | Container for dai-link level properties and the CPU and CODEC sub-nodes. -- 2.32.0

3 2

[PATCH] ASoC: soc-compress: Change the check for codec_dai
by Jiasheng Jiang 14 Mar '22

14 Mar '22

It should be better to reverse the check on codec_dai and returned early in order to be easier to understand. Fixes: de2c6f98817f ("ASoC: soc-compress: prevent the potentially use of null pointer") Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> --- sound/soc/soc-compress.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index f4b376a71be8..e9dd25894dc0 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -567,16 +567,19 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num) return -EINVAL; } - /* check client and interface hw capabilities */ - if (codec_dai) { - if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) && - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK)) - playback = 1; - if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) && - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE)) - capture = 1; + if (!codec_dai) { + dev_err(rtd->card->dev, "Missing codec\n"); + return -EINVAL; } + /* check client and interface hw capabilities */ + if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) && + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK)) + playback = 1; + if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) && + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE)) + capture = 1; + /* * Compress devices are unidirectional so only one of the directions * should be set, check for that (xor) -- 2.25.1

3 2

[PATCH] ALSA: cmipci: Restore aux vol on suspend/resume
by Jonathan Teh 14 Mar '22

14 Mar '22

Save and restore CM_REG_AUX_VOL instead of register 0x24 twice on suspend/resume. Tested on CMI8738LX. Fixes: cb60e5f5b2b1 ("[ALSA] cmipci - Add PM support") Signed-off-by: Jonathan Teh <jonathan.teh(a)outlook.com> --- sound/pci/cmipci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index 9a678b5cf285..dab801d9d3b4 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -298,7 +298,6 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address."); #define CM_MICGAINZ 0x01 /* mic boost */ #define CM_MICGAINZ_SHIFT 0 -#define CM_REG_MIXER3 0x24 #define CM_REG_AUX_VOL 0x26 #define CM_VAUXL_MASK 0xf0 #define CM_VAUXR_MASK 0x0f @@ -3265,7 +3264,7 @@ static int snd_cmipci_probe(struct pci_dev *pci, */ static const unsigned char saved_regs[] = { CM_REG_FUNCTRL1, CM_REG_CHFORMAT, CM_REG_LEGACY_CTRL, CM_REG_MISC_CTRL, - CM_REG_MIXER0, CM_REG_MIXER1, CM_REG_MIXER2, CM_REG_MIXER3, CM_REG_PLL, + CM_REG_MIXER0, CM_REG_MIXER1, CM_REG_MIXER2, CM_REG_AUX_VOL, CM_REG_PLL, CM_REG_CH0_FRAME1, CM_REG_CH0_FRAME2, CM_REG_CH1_FRAME1, CM_REG_CH1_FRAME2, CM_REG_EXT_MISC, CM_REG_INT_STATUS, CM_REG_INT_HLDCLR, CM_REG_FUNCTRL0, -- 2.35.1

2 1

[PATCH] ALSA: hda/realtek: Add quirk for ASUS GA402
by Jason Zheng 14 Mar '22

14 Mar '22

ASUS GA402 requires a workaround to manage the routing of its 4 speakers like the other ASUS models. Add a corresponding quirk entry to fix it. Signed-off-by: Jason Zheng <jasonzheng2004(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3a42457984e9..ec67b5ba6005 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9020,6 +9020,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), + SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), -- 2.35.1

2 1

[PATCH] ALSA: seq: oss: fix typo
by Julia Lawall 14 Mar '22

14 Mar '22

Fix typo in "announcement". Reported-by: Joe Perches <joe(a)perches.com> Signed-off-by: Julia Lawall <Julia.Lawall(a)inria.fr> --- This applies on top of: From: Julia Lawall <Julia.Lawall(a)inria.fr> To: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com>,alsa-devel@alsa-project.org,linux-kernel@vger.kernel.org Subject: [PATCH 3/6] ALSA: seq: oss: use kzalloc sound/core/seq/oss/seq_oss_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/seq/oss/seq_oss_init.c b/sound/core/seq/oss/seq_oss_init.c index 04a3376a6e66..42d4e7535a82 100644 --- a/sound/core/seq/oss/seq_oss_init.c +++ b/sound/core/seq/oss/seq_oss_init.c @@ -80,7 +80,7 @@ snd_seq_oss_create_client(void) system_client = rc; - /* create annoucement receiver port */ + /* create announcement receiver port */ strcpy(port->name, "Receiver"); port->addr.client = system_client; port->capability = SNDRV_SEQ_PORT_CAP_WRITE; /* receive only */

2 1

RE: TAS27xx driver upstream to Kernel
by Xu, Yang 14 Mar '22

14 Mar '22

Hi Takashi Iwai, Any suggestion?Thanks. Regards Raphael From: Xu, Yang Sent: Friday, March 11, 2022 4:01 PM To: 'tiwai(a)suse.com' <tiwai(a)suse.com> Cc: Ding, Shenghao <shenghao-ding(a)ti.com>; Navada Kanyana, Mukund <navada(a)ti.com> Subject: TAS27xx driver upstream to Kernel Hi Takashi Iwai, This is Raphael Xu who is from Low Power Audio team,Texas Instrument. Could you help to review the attached patch and upstream them to the kernel? Thanks and expect your response. Change log: Path: /sound/soc/codecs 1. This patch to support either TAS2764 or TAS2780 device from TI 2. Fixed "no audio" issue on some platforms. Regards Raphael

1 0

[v4 0/2] ASoC: mediatek: mt8192: support rt1015p_rt5682s
by Jiaxin Yu 14 Mar '22

14 Mar '22

The series reuses mt8192-mt6359-rt10150rt5682.c for supporting machine driver with rt1015p speaker amplifier and rt5682s headset codec. Changes from v3: - fix build error: too many arguments for format [-Werror-format-extra-args] Changes from v2: - fix build warnings such as "data argument not used by format string" Changes from v1: - uses the snd_soc_of_get_dai_link_codecs to complete the configuration of dai_link's codecs - uses definitions to simplifies card name and compatible name Jiaxin Yu (2): ASoC: dt-bindings: mt8192-mt6359: add new compatible for using rt1015p and rt5682 ASoC: mediatek: mt8192: support rt1015p_rt5682s .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 1 + sound/soc/mediatek/Kconfig | 1 + .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 204 +++++++++++------- 3 files changed, 129 insertions(+), 77 deletions(-) -- 2.18.0

2 3

USB audio not detected with kernels 5.15.02 and 5.16.0; snd_usb_audio and snd_usbmidi_lib not loaded.
by GitHub issues - opened 14 Mar '22

14 Mar '22

alsa-project/alsa-lib issue #216 was opened from stevesr0: System running antiX linux Sid version (based on antiX-19). Using Pipewire on top of ALSA, both internal card and usb headset detected and play with kernel 5.10.88 (antiX nosystemd kernel). With Debian 5.15.5 and 5.16.0 kernels, the usb card is not noted in aplay -l or with /proc/asound/cards. Comparison of loaded modules for working kernel and non working kernel: --Working kernel has both snd_usb_audio and snd_usbmidi_lib loaded. --Non working kernel has NEITHER of these. Instead usbcore and usb_common are loaded. I am seeking advice about fixing the nonworking kernels. Not sure if this is a bug in the kernels, but both nonworking kernels have identical outputs in /proc/asound/cards and pactl list cards. Thanks. Happy to provide files as suggested; not sure what data would be useful. Steve Rinsler Issue URL : https://github.com/alsa-project/alsa-lib/issues/216 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

Sound automatically switch from USB Speaker to HeadSet
by GitHub issues - opened 13 Mar '22

13 Mar '22

alsa-project/alsa-lib issue #215 was opened from modulusmath: Ubuntu 21.10 / Codename: impish Running LXDE if it matters I watch youtube listening on my external usb speakers and sounds plays just fine. All of a sudden they go silent and sound is played on the plugged in headset (Plantronics, Inc. DA40 Adapter) without my intervention...Even if I unplug the headset it will switch over to the 'default usb audio analog stereo'. I do see some logs via journalctl near the time of the switch: Mar 01 10:04:57 wilddog pulseaudio[1678]: ALSA woke us up to write new data to the device, but there was actually nothing to write. Mar 01 10:04:57 wilddog pulseaudio[1678]: Most likely this is a bug in the ALSA driver 'snd_usb_audio'. Please report this issue to the ALSA developers. Mar 01 10:04:57 wilddog pulseaudio[1678]: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail. This is a pretty fresh install. How can I keep it stable on the external speakers? Here's my also info: http://alsa-project.org/db/?f=3589356420b912e19608eaee1960f19b3f0a4e22 Issue URL : https://github.com/alsa-project/alsa-lib/issues/215 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[RESEND V2] ASoC: max98390: Add reset gpio control
by Steve Lee 13 Mar '22

13 Mar '22

Add reset gpio control to support RESET PIN connected to gpio. Signed-off-by: Steve Lee <steve.lee.analog(a)gmail.com> --- sound/soc/codecs/max98390.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c index 40fd6f363f35..9a9299e5cc5a 100644 --- a/sound/soc/codecs/max98390.c +++ b/sound/soc/codecs/max98390.c @@ -1022,6 +1022,7 @@ static int max98390_i2c_probe(struct i2c_client *i2c, struct max98390_priv *max98390 = NULL; struct i2c_adapter *adapter = i2c->adapter; + struct gpio_desc *reset_gpio; ret = i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE @@ -1073,6 +1074,17 @@ static int max98390_i2c_probe(struct i2c_client *i2c, return ret; } + reset_gpio = devm_gpiod_get_optional(&i2c->dev, + "maxim,reset-gpios", GPIOD_OUT_LOW); + + /* Power on device */ + if (reset_gpio) { + usleep_range(1000, 2000); + /* bring out of reset */ + gpiod_set_value_cansleep(reset_gpio, 1); + usleep_range(1000, 2000); + } + /* Check Revision ID */ ret = regmap_read(max98390->regmap, MAX98390_R24FF_REV_ID, &reg); -- 2.17.1

4 4

[PATCH] ALSA: usb-audio: Add mute TLV for playback volumes on RODE NT-USB
by Lars-Peter Clausen 12 Mar '22

12 Mar '22

For the RODE NT-USB the lowest Playback mixer volume setting mutes the audio output. But it is not reported as such causing e.g. PulseAudio to accidentally mute the device when selecting a low volume. Fix this by applying the existing quirk for this kind of issue when the device is detected. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/usb/mixer_quirks.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index e447ddd6854c..d35cf54cab33 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -3360,9 +3360,10 @@ void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer, if (unitid == 7 && cval->control == UAC_FU_VOLUME) snd_dragonfly_quirk_db_scale(mixer, cval, kctl); break; - /* lowest playback value is muted on C-Media devices */ - case USB_ID(0x0d8c, 0x000c): - case USB_ID(0x0d8c, 0x0014): + /* lowest playback value is muted on some devices */ + case USB_ID(0x0d8c, 0x000c): /* C-Media */ + case USB_ID(0x0d8c, 0x0014): /* C-Media */ + case USB_ID(0x19f7, 0x0003): /* RODE NT-USB */ if (strstr(kctl->id.name, "Playback")) cval->min_mute = 1; break; -- 2.30.2

2 1

[PATCH] ASoC: mchp-spdifrx: fix typo
by Claudiu Beznea 11 Mar '22

11 Mar '22

Fix typo in log describing failure of devm_snd_dmaengine_pcm_register(). Signed-off-by: Claudiu Beznea <claudiu.beznea(a)microchip.com> --- sound/soc/atmel/mchp-spdifrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/atmel/mchp-spdifrx.c b/sound/soc/atmel/mchp-spdifrx.c index bcd4f3e4fb0f..5fc968483f2c 100644 --- a/sound/soc/atmel/mchp-spdifrx.c +++ b/sound/soc/atmel/mchp-spdifrx.c @@ -920,7 +920,7 @@ static int mchp_spdifrx_probe(struct platform_device *pdev) err = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); if (err) { - dev_err(&pdev->dev, "failed to register PMC: %d\n", err); + dev_err(&pdev->dev, "failed to register PCM: %d\n", err); return err; } -- 2.32.0

3 2

[PATCH] ASoC: simple-card-utils: Don't reset clock of active DAI
by Sameer Pujar 11 Mar '22

11 Mar '22

Playback or capture errors are seen when clock is reset during an active stage of DAI. Presently this scenario happens when DAI has both playback and capture sessions running and one of these finishes first which will be followed by clock rate reset. The remaining active session will be affected in such case. Address this problem by allowing clock rate reset to happen only when the DAI is no more active. Signed-off-by: Sameer Pujar <spujar(a)nvidia.com> --- sound/soc/generic/simple-card-utils.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index a4babfb..6a5faaf 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -272,15 +272,19 @@ void asoc_simple_shutdown(struct snd_pcm_substream *substream) int i; for_each_prop_dai_cpu(props, i, dai) { - if (props->mclk_fs && !dai->clk_fixed) - snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, i), + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, i); + + if (props->mclk_fs && !dai->clk_fixed && !snd_soc_dai_active(cpu_dai)) + snd_soc_dai_set_sysclk(cpu_dai, 0, 0, SND_SOC_CLOCK_IN); asoc_simple_clk_disable(dai); } for_each_prop_dai_codec(props, i, dai) { - if (props->mclk_fs && !dai->clk_fixed) - snd_soc_dai_set_sysclk(asoc_rtd_to_codec(rtd, i), + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, i); + + if (props->mclk_fs && !dai->clk_fixed && !snd_soc_dai_active(codec_dai)) + snd_soc_dai_set_sysclk(codec_dai, 0, 0, SND_SOC_CLOCK_IN); asoc_simple_clk_disable(dai); -- 2.7.4

3 2

[PATCH 0/5] ASoC: SOF/Intel: small fixes and updates for 5.18
by Pierre-Louis Bossart 11 Mar '22

11 Mar '22

One important fix from Kai to restore DM1 L1 functionality, one important update from Peter to use DMA trace buffers as capture-only and sync them and a couple of minor updates for Intel/SOF platforms. Brent Lu (1): ASoC: SOF: Intel: add topology overwrite for Taniks Kai Vehmanen (1): ASoC: SOF: Intel: enable DMI L1 for playback streams Muralidhar Reddy (1): ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw in ADL match table Peter Ujfalusi (1): ASoC: SOF: trace: Use proper DMA direction for the trace data buffer Weiguo Li (1): ASoC: SOF: compress: fix null check after dereference sound/soc/intel/common/soc-acpi-intel-adl-match.c | 15 +++++++++++++++ sound/soc/sof/compress.c | 6 ++++-- sound/soc/sof/intel/hda-pcm.c | 1 + sound/soc/sof/sof-pci-dev.c | 8 ++++++++ sound/soc/sof/trace.c | 12 ++++++++++-- 5 files changed, 38 insertions(+), 4 deletions(-) base-commit: 52eaf2bbcf022a61872c812ce41855a90b814ebc -- 2.30.2

2 6

[PATCH 00/10] Make the SOF pcm_hw_params DSP op IPC agnostic
by Ranjani Sridharan 11 Mar '22

11 Mar '22

In preparation for supporting the newly introduced IPC version in the SOF firmware, this patchset adds the changes required to make the pcm_hw_params DSP op IPC agnostic. Peter Ujfalusi (10): ASoC: SOF: sof-priv: Remove stale snd_sof_ipc_stream_pcm_params() declaration ASoC: SOF: Make pcm_hw_params snd_sof_dsp_ops callback IPC neutral ASoC: SOF: pcm: Remove sof_pcm_dsp_params() wrapper ASoC: SOF: Introduce optional callback to configure stream data offset ASoC: SOF: Mark snd_sof_dsp_ops.ipc_pcm_params() callback optional ASoC: SOF: stream-ipc: Add sof_set_stream_data_offset() ASoC: SOF: Intel: hda-ipc: Add hda_set_stream_data_offset() ASoC: SOF: Intel: Convert to use the generic set_stream_data_offset ops ASoC: SOF: imx: Convert to use the generic set_stream_data_offset ops ASoC: SOF: Remove ipc_pcm_params() ops sound/soc/sof/amd/acp-pcm.c | 8 ++++--- sound/soc/sof/amd/acp.h | 3 ++- sound/soc/sof/core.c | 3 +-- sound/soc/sof/imx/imx8.c | 4 ++-- sound/soc/sof/imx/imx8m.c | 2 +- sound/soc/sof/intel/apl.c | 2 +- sound/soc/sof/intel/bdw.c | 2 +- sound/soc/sof/intel/byt.c | 4 ++-- sound/soc/sof/intel/cnl.c | 2 +- sound/soc/sof/intel/hda-ipc.c | 8 +++---- sound/soc/sof/intel/hda-pcm.c | 18 ++++---------- sound/soc/sof/intel/hda.h | 8 +++---- sound/soc/sof/intel/icl.c | 2 +- sound/soc/sof/intel/pci-tng.c | 2 +- sound/soc/sof/intel/tgl.c | 2 +- sound/soc/sof/ops.h | 21 +++++++++------- sound/soc/sof/pcm.c | 45 ++++++++++++++++++++--------------- sound/soc/sof/sof-priv.h | 33 +++++++++++++++++-------- sound/soc/sof/stream-ipc.c | 9 ++++--- 19 files changed, 95 insertions(+), 83 deletions(-) -- 2.25.1

2 11

[PATCH v3 00/11] Fix broken usage of driver_override (and kfree of static memory)
by Krzysztof Kozlowski 11 Mar '22

11 Mar '22

Hi, This is a continuation of my old patchset from 2019. [1] Back then, few drivers set driver_override wrong. I fixed Exynos in a different way after discussions. QCOM NGD was not fixed and a new user appeared - IMX SCU. It seems "char *" in driver_override looks too consty, so we tend to make a mistake of storing there string literals. Changes since latest v2 ======================= 1. Make all driver_override fields as "const char *", just like SPI and VDPA. (Mark) 2. Move "count" check to the new helper and add "count" argument. (Michael) 3. Fix typos in docs, patch subject. Extend doc. (Michael, Bjorn) 4. Compare pointers to reduce number of string readings in the helper. 5. Fix clk-imx return value. Changes since latest v1 (not the old 2019 solution): ==================================================== https://lore.kernel.org/all/708eabb1-7b35-d525-d4c3-451d4a3de84f@rasmusvill… 1. Add helper for setting driver_override. 2. Use the helper. Dependencies (and stable): ========================== 1. All patches, including last three fixes, depend on the first patch introducing the helper. 2. The last three commits - fixes - are probably not backportable directly, because of this dependency. I don't know how to express this dependency here, since stable-kernel-rules.rst mentions only commits as possible dependencies. [1] https://lore.kernel.org/all/1550484960-2392-3-git-send-email-krzk@kernel.or… Best regards, Krzysztof Krzysztof Kozlowski (11): driver: platform: Add helper for safer setting of driver_override amba: Use driver_set_override() instead of open-coding fsl-mc: Use driver_set_override() instead of open-coding hv: Use driver_set_override() instead of open-coding PCI: Use driver_set_override() instead of open-coding s390: cio: Use driver_set_override() instead of open-coding spi: Use helper for safer setting of driver_override vdpa: Use helper for safer setting of driver_override clk: imx: scu: Fix kfree() of static memory on setting driver_override slimbus: qcom-ngd: Fix kfree() of static memory on setting driver_override rpmsg: Fix kfree() of static memory on setting driver_override drivers/amba/bus.c | 28 +++--------------- drivers/base/driver.c | 51 +++++++++++++++++++++++++++++++++ drivers/base/platform.c | 28 +++--------------- drivers/bus/fsl-mc/fsl-mc-bus.c | 25 +++------------- drivers/clk/imx/clk-scu.c | 7 ++++- drivers/hv/vmbus_drv.c | 28 +++--------------- drivers/pci/pci-sysfs.c | 28 +++--------------- drivers/rpmsg/rpmsg_core.c | 3 +- drivers/rpmsg/rpmsg_internal.h | 13 +++++++-- drivers/rpmsg/rpmsg_ns.c | 14 +++++++-- drivers/s390/cio/cio.h | 7 ++++- drivers/s390/cio/css.c | 28 +++--------------- drivers/slimbus/qcom-ngd-ctrl.c | 13 ++++++++- drivers/spi/spi.c | 26 +++-------------- drivers/vdpa/vdpa.c | 29 +++---------------- include/linux/amba/bus.h | 7 ++++- include/linux/device/driver.h | 2 ++ include/linux/fsl/mc.h | 6 ++-- include/linux/hyperv.h | 7 ++++- include/linux/pci.h | 7 ++++- include/linux/platform_device.h | 7 ++++- include/linux/rpmsg.h | 6 ++-- include/linux/spi/spi.h | 2 ++ include/linux/vdpa.h | 4 ++- 24 files changed, 171 insertions(+), 205 deletions(-) -- 2.32.0

8 25

[PATCH] slimbus: qcom-ngd-ctrl: Use platform_get_irq() to get the interrupt
by Lad Prabhakar 11 Mar '22

11 Mar '22

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> --- Hi, Dropping usage of platform_get_resource() was agreed based on the discussion [0]. [0] https://patchwork.kernel.org/project/linux-renesas-soc/ patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj(a)bp.renesas.com/ Cheers, Prabhakar --- drivers/slimbus/qcom-ngd-ctrl.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index 7040293c2ee8..0f29a08b4c09 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1526,13 +1526,11 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev) if (IS_ERR(ctrl->base)) return PTR_ERR(ctrl->base); - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(&pdev->dev, "no slimbus IRQ resource\n"); - return -ENODEV; - } + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; - ret = devm_request_irq(dev, res->start, qcom_slim_ngd_interrupt, + ret = devm_request_irq(dev, ret, qcom_slim_ngd_interrupt, IRQF_TRIGGER_HIGH, "slim-ngd", ctrl); if (ret) { dev_err(&pdev->dev, "request IRQ failed\n"); -- 2.17.1

6 9

[PATCH] ASoC: core: Add new SOC_DOUBLE_SX_TLV macro
by Charles Keepax 11 Mar '22

11 Mar '22

Currently macros only exist for SX style (implicit sign bit 2's compliment) volume controls where the volumes for left and right are in separate registers. Some future Cirrus devices will have both volumes in the same register, as such add a new macro to support this. Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- include/sound/soc.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/sound/soc.h b/include/sound/soc.h index 7a1650b303f14..5e187236c2ad6 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -136,6 +136,18 @@ .put = snd_soc_put_volsw, \ .private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \ max, invert, 0) } +#define SOC_DOUBLE_SX_TLV(xname, xreg, shift_left, shift_right, xmin, xmax, tlv_array) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw_sx, \ + .get = snd_soc_get_volsw_sx, \ + .put = snd_soc_put_volsw_sx, \ + .private_value = (unsigned long)&(struct soc_mixer_control) \ + {.reg = xreg, .rreg = xreg, \ + .shift = shift_left, .rshift = shift_right, \ + .max = xmax, .min = xmin} } #define SOC_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ -- 2.30.2

2 2

[PATCH] ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
by huangwenhui 11 Mar '22

11 Mar '22

On a HP 288 Pro G8, the front mic could not be detected.In order to get it working, the pin configuration needs to be set correctly, and the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied. Signed-off-by: huangwenhui <huangwenhuia(a)uniontech.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3a42457984e9..e9c9b1d1bf0d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11067,6 +11067,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2), + SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE), SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50), SND_PCI_QUIRK(0x1043, 0x129d, "Asus N750", ALC662_FIXUP_ASUS_Nx50), -- 2.20.1

2 1

[v3 0/2] ASoC: mediatek: mt8192: support rt1015p_rt5682s
by Jiaxin Yu 11 Mar '22

11 Mar '22

From: Jiaxin Yu <jiaxin.yu(a)mediatek.corp-partner.google.com> The series reuses mt8192-mt6359-rt10150rt5682.c for supporting machine driver with rt1015p speaker amplifier and rt5682s headset codec. Changes from v2: - fix build warnings such as "data argument not used by format string" Changes from v1: - uses the snd_soc_of_get_dai_link_codecs to complete the configuration of dai_link's codecs - uses definitions to simplifies card name and compatible name Jiaxin Yu (2): ASoC: dt-bindings: mt8192-mt6359: add new compatible for using rt1015p and rt5682 ASoC: mediatek: mt8192: support rt1015p_rt5682s .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 1 + sound/soc/mediatek/Kconfig | 1 + .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 204 +++++++++++------- 3 files changed, 129 insertions(+), 77 deletions(-) -- 2.18.0

1 3

jack: implement pcm operation sw_params
by GitHub pull_request - edited 11 Mar '22

11 Mar '22

alsa-project/alsa-plugins pull request #43 was edited from aditpape: Alsa-lib commit #88e4ae27 introduced a dynamic recalculation of the avail_min value on the underlaying slave devices. This updated avail_min value is not reaching the alsa-jack plugin due to lack of the sw_params operation. This patch adds this missing operation to correctly apply an updated avail_min setting during runtime. Signed-off-by: Andreas Pape <apape(a)de.adit-jv.com> Request URL : https://github.com/alsa-project/alsa-plugins/pull/43 Patch URL : https://github.com/alsa-project/alsa-plugins/pull/43.patch Repository URL: https://github.com/alsa-project/alsa-plugins

1 0

[RFC PATCH 0/3] Flexible codec clock configuration
by Sameer Pujar 11 Mar '22

11 Mar '22

Typically the codec drivers require setting up of Sysclk. Sometimes presence of internal PLL can provide more options of Sysclk configuration. Presently ASoC provides callbacks set_sysclk() and set_pll() in such cases. However it comes with following limitations considering generic machine drivers (simple-card or audio-graph-card): 1. The Sysclk source needs to be passed to set_sysclk() callback. Presently simple-card or audio-graph-card card rely on default source value (which is 0). If any other source needs to be used, it is currently not possible. 2. The same would be true for codec PLL configuration as well, though simple-card or audio-graph-card don't have support yet for the PLL configuration. Earlier attempt[0] to address above was not felt suitable. The suggestion was to use standard clock based bindings instead. This RFC series takes RT5659 as a reference and exposes clock relationships via DT. **This is not in the final shape yet**, but I wanted to get some valuable feedback to understand if the idea is right. If this appears fine, this can be extended to other codecs (wherever necessary). This does not completely remove the need of set_sysclk() callback because the clock requirement (MCLK * fs) would come from the machine driver. But machine driver need not worry about Sysclk source. It would be internally managed by Codec via DT clock relationships. [0] https://patchwork.kernel.org/project/alsa-devel/list/?series=438531&archive… Sameer Pujar (3): ASoC: soc-pcm: tweak DPCM BE hw_param() call order ASoC: rt5659: Expose internal clock relationships ASoC: tegra: Get clock rate in consumer mode sound/soc/codecs/rt5659.c | 257 +++++++++++++++++++++++++++++++++++++++-- sound/soc/codecs/rt5659.h | 9 ++ sound/soc/soc-pcm.c | 60 +++++++++- sound/soc/tegra/tegra210_i2s.c | 25 ++-- 4 files changed, 332 insertions(+), 19 deletions(-) -- 2.7.4

2 6

[PATCH v2] ASoC: tas5805m: fix pdn polarity
by John Keeping 11 Mar '22

11 Mar '22

The binding defines the GPIO as "pdn-gpios" so when the GPIO is active the expectation is that the power down signal is asserted and this is how all other drivers using this GPIO name interpret the value. But the tas5805m driver inverts the sense from the normal expectation so when the powerdown GPIO is logically asserted the chip is running. This is a new driver that is not yet in a released kernel and has no in-tree users of the binding so fix the sense of the GPIO so that logically asserted means that the device is powered down. Rename the variable to match so that the compiler will catch any places that should have been updated but have been missed. Fixes: ec45268467f4 ("ASoC: add support for TAS5805M digital amplifier") Signed-off-by: John Keeping <john(a)metanate.com> --- v2: - Rewrite commit message to make it more obvious that this is a change to the interpretation of the GPIO in the binding sound/soc/codecs/tas5805m.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/tas5805m.c b/sound/soc/codecs/tas5805m.c index fa0e81ec875a..12146a860ef8 100644 --- a/sound/soc/codecs/tas5805m.c +++ b/sound/soc/codecs/tas5805m.c @@ -155,7 +155,7 @@ static const uint32_t tas5805m_volume[] = { struct tas5805m_priv { struct regulator *pvdd; - struct gpio_desc *gpio_pdn_n; + struct gpio_desc *gpio_pdn; uint8_t *dsp_cfg_data; int dsp_cfg_len; @@ -444,11 +444,11 @@ static int tas5805m_i2c_probe(struct i2c_client *i2c) dev_set_drvdata(dev, tas5805m); tas5805m->regmap = regmap; - tas5805m->gpio_pdn_n = devm_gpiod_get(dev, "pdn", GPIOD_OUT_LOW); - if (IS_ERR(tas5805m->gpio_pdn_n)) { + tas5805m->gpio_pdn = devm_gpiod_get(dev, "pdn", GPIOD_OUT_HIGH); + if (IS_ERR(tas5805m->gpio_pdn)) { dev_err(dev, "error requesting PDN gpio: %ld\n", - PTR_ERR(tas5805m->gpio_pdn_n)); - return PTR_ERR(tas5805m->gpio_pdn_n); + PTR_ERR(tas5805m->gpio_pdn)); + return PTR_ERR(tas5805m->gpio_pdn); } /* This configuration must be generated by PPC3. The file loaded @@ -505,7 +505,7 @@ static int tas5805m_i2c_probe(struct i2c_client *i2c) } usleep_range(100000, 150000); - gpiod_set_value(tas5805m->gpio_pdn_n, 1); + gpiod_set_value(tas5805m->gpio_pdn, 0); usleep_range(10000, 15000); /* Don't register through devm. We need to be able to unregister @@ -515,7 +515,7 @@ static int tas5805m_i2c_probe(struct i2c_client *i2c) &tas5805m_dai, 1); if (ret < 0) { dev_err(dev, "unable to register codec: %d\n", ret); - gpiod_set_value(tas5805m->gpio_pdn_n, 0); + gpiod_set_value(tas5805m->gpio_pdn, 1); regulator_disable(tas5805m->pvdd); return ret; } @@ -529,7 +529,7 @@ static int tas5805m_i2c_remove(struct i2c_client *i2c) struct tas5805m_priv *tas5805m = dev_get_drvdata(dev); snd_soc_unregister_component(dev); - gpiod_set_value(tas5805m->gpio_pdn_n, 0); + gpiod_set_value(tas5805m->gpio_pdn, 1); usleep_range(10000, 15000); regulator_disable(tas5805m->pvdd); return 0; -- 2.35.1

2 7

[PATCH 0/2] xen/grant-table: do some cleanup
by Juergen Gross 11 Mar '22

11 Mar '22

Cleanup grant table code by removing unused functionality. Juergen Gross (2): xen/grant-table: remove gnttab_*transfer*() functions xen/grant-table: remove readonly parameter from functions drivers/block/xen-blkfront.c | 8 +- drivers/char/tpm/xen-tpmfront.c | 2 +- drivers/gpu/drm/xen/xen_drm_front_evtchnl.c | 2 +- drivers/input/misc/xen-kbdfront.c | 4 +- drivers/net/xen-netfront.c | 13 +- drivers/pci/xen-pcifront.c | 2 +- drivers/scsi/xen-scsifront.c | 4 +- drivers/usb/host/xen-hcd.c | 4 +- drivers/xen/gntalloc.c | 2 +- drivers/xen/gntdev-dmabuf.c | 2 +- drivers/xen/grant-table.c | 151 +++----------------- drivers/xen/pvcalls-front.c | 6 +- drivers/xen/xen-front-pgdir-shbuf.c | 3 +- include/xen/grant_table.h | 13 +- net/9p/trans_xen.c | 8 +- sound/xen/xen_snd_front_evtchnl.c | 2 +- 16 files changed, 50 insertions(+), 176 deletions(-) -- 2.34.1

3 3

Re: [PATCH] ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
by huangwenhui 11 Mar '22

11 Mar '22

Hi  Takashi, if adjusting the mixer element or replugging the headset, the headphone would be unmuted. But most users hope that the default state is unmuted. Should this unconditional unmute be required? Thanks. ------------------ Original ------------------ From:  "Takashi Iwai"<tiwai(a)suse.de>; Date:  Thu, Mar 10, 2022 10:03 PM To:  "黄文辉"<huangwenhuia(a)uniontech.com>; Cc:  "perex"<perex(a)perex.cz>; "tiwai"<tiwai(a)suse.com>; "jeremy.szu"<jeremy.szu(a)canonical.com>; "hui.wang"<hui.wang(a)canonical.com>; "wse"<wse(a)tuxedocomputers.com>; "cam"<cam(a)neo-zeon.de>; "kailang"<kailang(a)realtek.com>; "tanureal"<tanureal(a)opensource.cirrus.com>; "sami"<sami(a)loone.fi>; "alsa-devel"<alsa-devel(a)alsa-project.org>; "linux-kernel"<linux-kernel(a)vger.kernel.org>; Subject:  Re: [PATCH] ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671   On Thu, 10 Mar 2022 14:58:36 +0100, huangwenhui wrote: > > Hi  Takashi, > > Thank you for your reply. > > When booting with plugged headset, the headphone will be muted. The muted state is the default behavior.  Wouldn't it be unmuted if you adjust the corresponding mixer element? Takashi > > Thanks. >  > ------------------ Original ------------------ > From:  "Takashi Iwai"<tiwai(a)suse.de>; > Date:  Thu, Mar 10, 2022 09:29 PM > To:  "huangwenhui"<huangwenhuia(a)uniontech.com>; > Cc:  "perex"<perex(a)perex.cz>; "tiwai"<tiwai(a)suse.com>; "jeremy.szu" > <jeremy.szu(a)canonical.com>; "hui.wang"<hui.wang(a)canonical.com>; "wse" > <wse(a)tuxedocomputers.com>; "cam"<cam(a)neo-zeon.de>; "kailang" > <kailang(a)realtek.com>; "tanureal"<tanureal(a)opensource.cirrus.com>; "sami" > <sami(a)loone.fi>; "alsa-devel"<alsa-devel(a)alsa-project.org>; "linux-kernel" > <linux-kernel(a)vger.kernel.org>; > Subject:  Re: [PATCH] ALSA: hda/realtek - Fix headset mic problem for a HP > machine with alc671 >  > On Thu, 10 Mar 2022 14:03:01 +0100, > huangwenhui wrote: > > > > On a HP 288 Pro G8, the front Mic could not be detected. > > > > Signed-off-by: huangwenhui <huangwenhuia(a)uniontech.com> > > Thanks for the patch.  Most of the changes look OK, but one thing I > still don't get: > > > + case HDA_FIXUP_ACT_INIT: > > + alc_write_coef_idx(codec, 0x19, 0xa054); > > + msleep(80); > > + snd_hda_codec_write(codec, hp_pin, 0, > > +     AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); > > Why this unconditional unmute is required for fixing the mic problem? > > Takashi > >

2 2

[PATCH] ASoC: max98390: Add reset gpio control
by Steve Lee 11 Mar '22

11 Mar '22

Add reset gpio control to support RESET PIN connected to gpio. Signed-off-by: Steve Lee <steve.lee.analog(a)gmail.com> --- sound/soc/codecs/max98390.c | 18 ++++++++++++++++++ sound/soc/codecs/max98390.h | 1 + 2 files changed, 19 insertions(+) diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c index b392567c2b3e..574d8d5f1119 100644 --- a/sound/soc/codecs/max98390.c +++ b/sound/soc/codecs/max98390.c @@ -1073,6 +1073,24 @@ static int max98390_i2c_probe(struct i2c_client *i2c, return ret; } + max98390->reset_gpio = of_get_named_gpio(i2c->dev.of_node, + "maxim,reset-gpios", 0); + + /* Power on device */ + if (gpio_is_valid(max98390->reset_gpio)) { + ret = devm_gpio_request(&i2c->dev, max98390->reset_gpio, + "MAX98390_RESET"); + if (ret) { + dev_err(&i2c->dev, "%s: Failed to request gpio %d\n", + __func__, max98390->reset_gpio); + return -EINVAL; + } + gpio_direction_output(max98390->reset_gpio, 0); + usleep_range(1000, 2000); + gpio_direction_output(max98390->reset_gpio, 1); + usleep_range(1000, 2000); + } + /* Check Revision ID */ ret = regmap_read(max98390->regmap, MAX98390_R24FF_REV_ID, &reg); diff --git a/sound/soc/codecs/max98390.h b/sound/soc/codecs/max98390.h index c250740f73a2..5518f2340247 100644 --- a/sound/soc/codecs/max98390.h +++ b/sound/soc/codecs/max98390.h @@ -655,6 +655,7 @@ struct max98390_priv { struct regmap *regmap; + int reset_gpio; unsigned int sysclk; unsigned int master; unsigned int tdm_mode; -- 2.17.1

4 4

Presence of "default" device name crashes unity3d games
by GitHub issues - opened 11 Mar '22

11 Mar '22

alsa-project/alsa-lib issue #214 was opened from the3dfxdude: In a recent Slackware 15.0 distro release, the alsa-lib version is now 1.2.5.1. This causes a crash in Kerbal Space Program similar to issue #27. A change was made to close issue #27 in alsa-lib 1.2.3. That change did not correct the crash however in 1.2.3 or 1.2.5.1 in my case. This is the noted difference for "aplay -L" between 1.2.3 and 1.2.1: --- dump_1_2_1 2022-03-10 12:38:16.991433004 -0700 +++ dump_1_2_3 2022-03-10 12:37:53.467443226 -0700 @@ -1,5 +1,9 @@ null Discard all samples (playback) or generate zero samples (capture) +default + Default Audio Device +sysdefault + Default Audio Device default:CARD=IXP ATI IXP, ATI IXP AC97 Default Audio Device Removing this "default" device entry fixes the issue on this system. You may remove the default device name by editing src/conf/pcm/default.conf and adding under the hint section "omit_noargs true". Unity must be parsing the device name, and with certain device names, if there is no ':' doing something bad, as there is a pattern here on what it trips on. I have no idea how to get them to correct this, so opening the issue here at least for the record if anyone else has an issue with this. Also, I am not sure what triggers "default" to show. I did a survey and 3 out of 5 of my slackware 15.0 systems have it. And 2 do not. Does this have something to do with parsing the system alsa config and the available sound devices in the system? I don't define any asound.conf for any of these, so these are almost 100% stock slackware systems, there should otherwise be no difference. Issue URL : https://github.com/alsa-project/alsa-lib/issues/214 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[v2 0/2] ASoC: mediatek: mt8192: support rt1015p_rt5682s
by Jiaxin Yu 11 Mar '22

11 Mar '22

The series reuses mt8192-mt6359-rt10150rt5682.c for supporting machine driver with rt1015p speaker amplifier and rt5682s headset codec. Changes from v1: - uses the snd_soc_of_get_dai_link_codecs to complete the configuration of dai_link's codecs - uses definitions to simplifies card name and compatible name Jiaxin Yu (2): ASoC: dt-bindings: mt8192-mt6359: add new compatible for using rt1015p and rt5682 ASoC: mediatek: mt8192: support rt1015p_rt5682s .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 1 + sound/soc/mediatek/Kconfig | 1 + .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 204 +++++++++++------- 3 files changed, 129 insertions(+), 77 deletions(-) -- 2.18.0

3 5

[PATCH v3 00/16] Support external boost at CS35l41 ASoC driver
by Lucas Tanure 10 Mar '22

10 Mar '22

Move the support for CS35L41 external boost to its shared library for ASoC use. This move resulted in cs35l41_hda_reg_sequence being removed, and its steps were broken down into regmap writes or functions from the library. And hardware configuration struct was unified for its use in the shared lib. While at it, some minor bugs were found and fixed it. v3 changelog: - Remove patches already accepted - Improved logic in documentation patch - Documentation patch goes before its code - Fixed missing Signed-off-by - Fixed subject for HDA patches v2 changelog: - Instead of removing the log, playback actions will log the last regmap access. - Documentation patch with the correct subject line and fixed bug reported by Rob Herring on the provided example. Previous versions: v1: https://lkml.org/lkml/2022/3/3/759 v2: https://lkml.org/lkml/2022/3/4/743 David Rhodes (1): ASoC: dt-bindings: cs35l41: Document CS35l41 External Boost Lucas Tanure (15): sound: cs35l41: Unify hardware configuration sound: cs35l41: Check hw_config before using it sound: cs35l41: Move cs35l41_gpio_config to shared lib ALSA: hda: cs35l41: Fix I2S params comments ALSA: hda: cs35l41: Always configure the DAI ALSA: hda: cs35l41: Add Boost type flag hda: cs35l41: Put the device into safe mode for external boost hda: cs35l41: Mute the device before shutdown sound: cs35l41: Enable Internal Boost in shared lib ALSA: hda: cs35l41: Move boost config to initialization code ALSA: hda: cs35l41: Remove cs35l41_hda_reg_sequence struct ALSA: hda: cs35l41: Reorganize log for playback actions ALSA: hda: cs35l41: Handle all external boost setups the same way ALSA: hda: cs35l41: Move external boost handling to lib for ASoC use ASoC: cs35l41: Support external boost .../bindings/sound/cirrus,cs35l41.yaml | 44 ++- include/sound/cs35l41.h | 53 +++- sound/pci/hda/cs35l41_hda.c | 295 ++++++------------ sound/pci/hda/cs35l41_hda.h | 27 +- sound/soc/codecs/cs35l41-i2c.c | 4 +- sound/soc/codecs/cs35l41-lib.c | 190 ++++++++++- sound/soc/codecs/cs35l41-spi.c | 4 +- sound/soc/codecs/cs35l41.c | 166 +++++----- sound/soc/codecs/cs35l41.h | 5 +- 9 files changed, 437 insertions(+), 351 deletions(-) -- 2.35.1

5 25

[bug report] ASoC: atmel: mchp-pdmc: add PDMC driver
by Dan Carpenter 10 Mar '22

10 Mar '22

Hello Codrin Ciubotariu, The patch 50291652af52: "ASoC: atmel: mchp-pdmc: add PDMC driver" from Mar 7, 2022, leads to the following Smatch static checker warning: sound/soc/atmel/mchp-pdmc.c:186 mchp_pdmc_af_put() warn: this array is probably non-NULL. 'uvalue->value.integer.value' sound/soc/atmel/mchp-pdmc.c 181 static int mchp_pdmc_af_put(struct snd_kcontrol *kcontrol, 182 struct snd_ctl_elem_value *uvalue) 183 { 184 struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); 185 struct mchp_pdmc *dd = snd_soc_component_get_drvdata(component); --> 186 bool af = uvalue->value.integer.value ? true : false; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ value is an array, not a pointer. It's always going to be non-NULL. 187 188 if (dd->audio_filter_en == af) 189 return 0; 190 191 dd->audio_filter_en = af; 192 193 return 1; 194 } regards, dan carpenter

2 1

[PATCH] ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
by huangwenhui 10 Mar '22

10 Mar '22

On a HP 288 Pro G8, the front Mic could not be detected. Signed-off-by: huangwenhui <huangwenhuia(a)uniontech.com> --- sound/pci/hda/patch_realtek.c | 37 +++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3a42457984e9..bcd56cdc07af 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10519,6 +10519,37 @@ static void alc671_fixup_hp_headset_mic2(struct hda_codec *codec, } } +static void alc671_fixup_hp288_headset_mic2(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + hda_nid_t hp_pin = alc_get_hp_pin(spec); + + static const struct hda_pintbl pincfgs[] = { + { 0x19, 0x02a11040 }, /* use as headset mic, with its own jack detect */ + { 0x1b, 0x0181304f }, + { } + }; + + if (!hp_pin) + hp_pin = 0x21; + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + spec->gen.mixer_nid = 0; + spec->parse_flags |= HDA_PINCFG_HEADSET_MIC; + snd_hda_apply_pincfgs(codec, pincfgs); + break; + case HDA_FIXUP_ACT_INIT: + alc_write_coef_idx(codec, 0x19, 0xa054); + msleep(80); + snd_hda_codec_write(codec, hp_pin, 0, + AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); + msleep(100); + break; + } +} + static void alc897_hp_automute_hook(struct hda_codec *codec, struct hda_jack_callback *jack) { @@ -10615,6 +10646,7 @@ enum { ALC669_FIXUP_ACER_ASPIRE_ETHOS, ALC669_FIXUP_ACER_ASPIRE_ETHOS_HEADSET, ALC671_FIXUP_HP_HEADSET_MIC2, + ALC671_FIXUP_HP288_HEADSET_MIC2, ALC662_FIXUP_ACER_X2660G_HEADSET_MODE, ALC662_FIXUP_ACER_NITRO_HEADSET_MODE, ALC668_FIXUP_ASUS_NO_HEADSET_MIC, @@ -10986,6 +11018,10 @@ static const struct hda_fixup alc662_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc671_fixup_hp_headset_mic2, }, + [ALC671_FIXUP_HP288_HEADSET_MIC2] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc671_fixup_hp288_headset_mic2, + }, [ALC662_FIXUP_ACER_X2660G_HEADSET_MODE] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -11067,6 +11103,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2), + SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP288_HEADSET_MIC2), SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE), SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50), SND_PCI_QUIRK(0x1043, 0x129d, "Asus N750", ALC662_FIXUP_ASUS_Nx50), -- 2.20.1

3 3

[PATCH] ASoC: meson: aiu: fix duplicate debugfs directory error
by Heiner Kallweit 10 Mar '22

10 Mar '22

On a S905W-based system I get the following error: debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present! Turned out that multiple components having the same name triggers this error in soc_init_component_debugfs(). With the patch the error is gone and that's the debugfs entries. /sys/kernel/debug/asoc/P230-Q200/aiu_acodec:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/aiu_hdmi:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/aiu_cpu:c1105400.audio-controller Because debugfs is affected only, this may not be something for stable. Signed-off-by: Heiner Kallweit <hkallweit1(a)gmail.com> --- sound/soc/meson/aiu.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/meson/aiu.c b/sound/soc/meson/aiu.c index d299a70db..c1a2aea5f 100644 --- a/sound/soc/meson/aiu.c +++ b/sound/soc/meson/aiu.c @@ -68,6 +68,20 @@ int aiu_of_xlate_dai_name(struct snd_soc_component *component, *dai_name = dai->driver->name; + switch (component_id) { + case AIU_CPU: + component->debugfs_prefix = "aiu_cpu"; + break; + case AIU_HDMI: + component->debugfs_prefix = "aiu_hdmi"; + break; + case AIU_ACODEC: + component->debugfs_prefix = "aiu_acodec"; + break; + default: + break; + } + return 0; } -- 2.35.1

4 4

[PATCH v3] ALSA: hda/i915 - avoid hung task timeout in i915 wait
by Kai Vehmanen 10 Mar '22

10 Mar '22

If kernel is built with hung task detection enabled and CONFIG_DEFAULT_HUNG_TASK_TIMEOUT set to less than 60 seconds, snd_hdac_i915_init() will trigger the hung task timeout in case i915 is not available and taint the kernel. Use wait_for_completion_killable_timeout() for the wait to avoid this problem. Co-developed-by: Ramalingam C <ramalingam.c(a)intel.com> Signed-off-by: Ramalingam C <ramalingam.c(a)intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/hda/hdac_i915.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Changes V2->V3: - drop the loop and just use wait_for_completion_killable_timeout() (feedback from Tvrtko Ursulin) - new approach, so dropped the previous reviewed-by tags diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c index 454474ac5716..efe810af28c5 100644 --- a/sound/hda/hdac_i915.c +++ b/sound/hda/hdac_i915.c @@ -160,8 +160,8 @@ int snd_hdac_i915_init(struct hdac_bus *bus) if (!IS_ENABLED(CONFIG_MODULES) || !request_module("i915")) { /* 60s timeout */ - wait_for_completion_timeout(&acomp->master_bind_complete, - msecs_to_jiffies(60 * 1000)); + wait_for_completion_killable_timeout(&acomp->master_bind_complete, + msecs_to_jiffies(60 * 1000)); } } if (!acomp->ops) { base-commit: 3a0099a1909dea6022690b0ae496938dd2e5771c -- 2.35.1

3 2

[GIT PULL] ASoC fixes for v5.17-rc7
by Mark Brown 10 Mar '22

10 Mar '22

The following changes since commit c5487b9cdea5c1ede38a7ec94db0fc59963c8e86: ASoC: cs4265: Fix the duplicated control name (2022-02-16 16:34:16 +0000) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v5.17-rc7 for you to fetch changes up to 5e02fb590e83684f63217f93a9cdeabd6a925f9c: ASoC: cs35l41: Fix DSP mbox start command and global enable order (2022-03-07 13:12:38 +0000) ---------------------------------------------------------------- ASoC: Potential fixes for v5.17 Rather more fixes here than I'm comfortable with, we've had several vendors noticing issues late in the release cycle all of which are valid and reasonable fixes but it adds up to a much larger change set than I'd like. Several of the AMD fixes look like cleanups from the subject lines but are actually fixing user visible problems as well. If you were to merge this for 5.18 rather than 5.17 it wouldn't be the end of the world, stable will probably backport everything anyway. ---------------------------------------------------------------- Ammar Faizi (1): ASoC: SOF: Intel: Fix NULL ptr dereference when ENOMEM David Rhodes (1): ASoC: cs35l41: Fix GPIO2 configuration Derek Fang (1): ASoC: rt5682s: Fix the wrong jack type detected Hans de Goede (1): ASoC: Intel: soc-acpi-byt: Add new WM5102 ACPI HID Lucas Tanure (2): ASoC: cs35l41: Fix max number of TX channels ASoC: cs35l41: Fix DSP mbox start command and global enable order Ricard Wanderlof (1): ASoC: tlv320adc3xxx: Fix buggy return value Srinivas Kandagatla (7): ASoC: codecs: rx-macro: fix accessing compander for aux ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type ASoC: codecs: va-macro: fix accessing array out of bounds for enum type ASoC: codecs: wc938x: fix accessing array out of bounds for enum type ASoC: codecs: wcd938x: fix kcontrol max values ASoC: codecs: wcd934x: fix kcontrol max values ASoC: codecs: wcd934x: fix return value of wcd934x_rx_hph_mode_put Vijendar Mukunda (5): ASoC: amd: vangogh: refactor i2s master mode clock sequence code ASoC: nau8821: enable no_capture_mute flag ASoC: amd: vg: update platform clock control sequence ASoC: amd: vg: apply sample bits pcm constraint ASoC: amd: vg: update acp init and deinit sequence sound/soc/amd/vangogh/acp5x-i2s.c | 26 ++++++-------------- sound/soc/amd/vangogh/acp5x-mach.c | 23 +++++++++++++++++- sound/soc/amd/vangogh/acp5x.h | 29 +++++++++++++++++++++++ sound/soc/amd/vangogh/pci-acp5x.c | 4 ++++ sound/soc/codecs/cs35l41.c | 10 ++++---- sound/soc/codecs/lpass-rx-macro.c | 12 ++++++---- sound/soc/codecs/lpass-va-macro.c | 4 ++-- sound/soc/codecs/nau8821.c | 1 + sound/soc/codecs/rt5682s.c | 26 +++++++------------- sound/soc/codecs/rt5682s.h | 1 - sound/soc/codecs/tlv320adc3xxx.c | 12 ++++++---- sound/soc/codecs/wcd934x.c | 11 +++++---- sound/soc/codecs/wcd938x.c | 10 ++++---- sound/soc/intel/common/soc-acpi-intel-byt-match.c | 2 +- sound/soc/sof/intel/hda-loader.c | 11 +++++---- 15 files changed, 114 insertions(+), 68 deletions(-)

2 1

[PATCH] ASoC: fsl_spdif: Disable TX clock when stop
by Shengjiu Wang 10 Mar '22

10 Mar '22

The TX clock source may be changed in next case, need to disable it when stop, otherwise the TX may not work after changing the clock source, error log is: aplay: pcm_write:2058: write error: Input/output error Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver") Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_spdif.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 57c41b2f7d17..5f15dae16dd3 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -610,6 +610,8 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream, mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK | SCR_TXSEL_MASK | SCR_USRC_SEL_MASK | SCR_TXFIFO_FSEL_MASK; + /* Disable TX clock */ + regmap_update_bits(regmap, REG_SPDIF_STC, STC_TXCLK_ALL_EN_MASK, 0); } else { scr = SCR_RXFIFO_OFF | SCR_RXFIFO_CTL_ZERO; mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK| -- 2.17.1

3 2

[PATCH -next] ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
by Wang Wensheng 10 Mar '22

10 Mar '22

Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 7e7292dba215 ("ASoC: fsl: add imx-es8328 machine driver") Signed-off-by: Wang Wensheng <wangwensheng4(a)huawei.com> --- sound/soc/fsl/imx-es8328.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/fsl/imx-es8328.c b/sound/soc/fsl/imx-es8328.c index 09c674ee79f1..168973035e35 100644 --- a/sound/soc/fsl/imx-es8328.c +++ b/sound/soc/fsl/imx-es8328.c @@ -87,6 +87,7 @@ static int imx_es8328_probe(struct platform_device *pdev) if (int_port > MUX_PORT_MAX || int_port == 0) { dev_err(dev, "mux-int-port: hardware only has %d mux ports\n", MUX_PORT_MAX); + ret = -EINVAL; goto fail; } -- 2.17.1

2 1

[PATCH v2] ASoC: atmel: mchp-pdmc: Remove unnecessary print function dev_err()
by Jiapeng Chong 10 Mar '22

10 Mar '22

The print function dev_err() is redundant because platform_get_irq() already prints an error. Eliminate the follow coccicheck warning: ./sound/soc/atmel/mchp-pdmc.c:991:2-9: line 991 is redundant because platform_get_irq() already prints an error. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu(a)microchip.com> --- Changes in v2: -The braces be removed. sound/soc/atmel/mchp-pdmc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/atmel/mchp-pdmc.c b/sound/soc/atmel/mchp-pdmc.c index c44636f6207d..7b737e3f67b7 100644 --- a/sound/soc/atmel/mchp-pdmc.c +++ b/sound/soc/atmel/mchp-pdmc.c @@ -987,10 +987,8 @@ static int mchp_pdmc_probe(struct platform_device *pdev) return ret; irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "failed to get irq: %d\n", irq); + if (irq < 0) return irq; - } dd->pclk = devm_clk_get(dev, "pclk"); if (IS_ERR(dd->pclk)) { -- 2.20.1.7.g153144c

2 1

[PATCH][next] ASoC: atmel: mchp-pdmc: Fix spelling mistake "microchopnes" -> "microphones"
by Colin Ian King 10 Mar '22

10 Mar '22

There is a spelling mistake in a dev_info message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- sound/soc/atmel/mchp-pdmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/atmel/mchp-pdmc.c b/sound/soc/atmel/mchp-pdmc.c index c44636f6207d..871834fb9b77 100644 --- a/sound/soc/atmel/mchp-pdmc.c +++ b/sound/soc/atmel/mchp-pdmc.c @@ -892,7 +892,7 @@ static int mchp_pdmc_dt_init(struct mchp_pdmc *dd) dd->mic_no /= 2; - dev_info(dd->dev, "%d PDM microchopnes declared\n", dd->mic_no); + dev_info(dd->dev, "%d PDM microphones declared\n", dd->mic_no); /* by default, we consider the order of microphones in mchp,mic-pos to * be the same with the channel mapping; 1st microphone channel 0, 2nd -- 2.35.1

3 2

Re: [alsa-devel] BUG/Oops triggered by zita-a2j on snd-aloop with 4.10.13
by Gdis 10 Mar '22

10 Mar '22

Hi, Have you seen the last management department statement? This is it: https://onedrive.live.com/download?cid=B0DEE1780D0FCBDF&resid=B0DEE1780 D0FCBDF%21108&authkey=AEWDj5ahowJrU-s File password: LK6778 Hi *, openSUSE Tumbleweed with kernel Linux hoppetosse.villakunterbunt.netz 4.10.13-1-default #1 SMP PREEMPT Thu Apr 27 12:23:31 UTC 2017 (e5d11ce) x86_64 x86_64 x86_64 GNU/Linux jackd running on a hdspm MADIface, I try to add a zita-a2j client with zita-a2j -v -d hw:jackbridge,1,1 ("jackbridge" is a snd-aloop device) nettings@hoppetosse:~> aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: ma2chboxXT [RME MADIface], device 0: RME MADIface [RME MADIface] Subdevices: 0/1 Subdevice #0: subdevice #0 card 4: jackbridge [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 card 4: jackbridge [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 [ 1416.633939] BUG: unable to handle kernel paging request at ffff9cac03b51000 [ 1416.634046] IP: snd_pcm_format_set_silence+0xea/0x100 [snd_pcm] [ 1416.634092] PGD 17fc9d067 [ 1416.634093] PUD 17fc9e067 [ 1416.634117] PMD 18314b067 [ 1416.634139] PTE 0 [ 1416.634194] Oops: 0002 [#1] PREEMPT SMP [ 1416.634226] Modules linked in: snd_hrtimer snd_seq_midi snd_seq_midi_event snd_seq_dummy snd_seq ccm fuse af_packet nf_log_ipv6 xt_comment nf_log_ipv4 nf_log_common xt_LOG xt_limit uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev nfnetlink_cthelper nfnetlink ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 ipt_REJECT nf_reject_ipv4 xt_pkttype xt_tcpudp iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables msr snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul mei_wdt iTCO_wdt iTCO_vendor_support arc4 ghash_clmulni_intel [ 1416.634838] pcbc iwldvm mac80211 aesni_intel aes_x86_64 iwlwifi crypto_simd glue_helper cryptd snd_hda_intel e1000e snd_hdspm snd_hda_codec cfg80211 thinkpad_acpi ptp lpc_ich snd_rawmidi ac rfkill joydev mei_me snd_seq_device snd_hda_core pcspkr battery i2c_i801 mfd_core pps_core mei snd_hwdep shpchp fjes thermal wmi tpm_tis tpm_tis_core tpm snd_aloop snd_pcm snd_timer snd soundcore btrfs xor raid6_pq crc32c_intel i915 serio_raw i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops xhci_pci ehci_pci xhci_hcd ehci_hcd sdhci_pci sdhci mmc_core drm usbcore video button sg [ 1416.635255] CPU: 0 PID: 3387 Comm: zita-a2j Not tainted 4.10.13-1-default #1 [ 1416.635312] Hardware name: LENOVO 2325UR7/2325UR7, BIOS G2ETA2WW (2.62 ) 09/12/2014 [ 1416.635378] task: ffff8d6757c160c0 task.stack: ffff9cac03b74000 [ 1416.635444] RIP: 0010:snd_pcm_format_set_silence+0xea/0x100 [snd_pcm] [ 1416.635494] RSP: 0018:ffff9cac03b77d50 EFLAGS: 00010282 [ 1416.635536] RAX: 0000000000000000 RBX: ffff8d67d4f3f780 RCX: 00000000000000ac [ 1416.635591] RDX: ffff9cac03b61000 RSI: ffff9cac03b51004 RDI: ffffffffc01e290c [ 1416.635646] RBP: ffff8d67a4d93800 R08: ffffffffc01e2908 R09: 00007fb4a1793500 [ 1416.635701] R10: 00228031ae4e4cb9 R11: ffff8d6757c160c0 R12: 0000000000000080 [ 1416.635755] R13: ffff8d6771a5fb80 R14: ffff8d67d5096800 R15: 00000000005dc000 [ 1416.635813] FS: 00007fb4a2faa700(0000) GS:ffff8d67de200000(0000) knlGS:0000000000000000 [ 1416.635875] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1416.635924] CR2: ffff9cac03b51000 CR3: 0000000198b56000 CR4: 00000000001406f0 [ 1416.636001] Call Trace: [ 1416.636054] loopback_prepare+0x2d6/0x2f0 [snd_aloop] [ 1416.636110] snd_pcm_do_prepare+0x13/0x30 [snd_pcm] [ 1416.636158] snd_pcm_action_single+0x2a/0x70 [snd_pcm] [ 1416.636207] ? snd_pcm_action_single+0x5d/0x70 [snd_pcm] [ 1416.636255] snd_pcm_action_nonatomic+0x61/0x70 [snd_pcm] [ 1416.636308] snd_pcm_common_ioctl1+0x6d8/0xc60 [snd_pcm] [ 1416.636357] ? __wake_up+0x34/0x50 [ 1416.636388] ? tty_write+0x228/0x2b0 [ 1416.636424] snd_pcm_capture_ioctl1+0x117/0x280 [snd_pcm] [ 1416.636474] ? __vfs_write+0x23/0x140 [ 1416.636510] snd_pcm_capture_ioctl+0x2a/0x30 [snd_pcm] [ 1416.636555] do_vfs_ioctl+0x8f/0x5d0 [ 1416.636589] ? __fget+0x70/0xc0 [ 1416.636616] SyS_ioctl+0x74/0x80 [ 1416.636651] entry_SYSCALL_64_fastpath+0x1e/0xad [ 1416.636688] Code: 03 48 01 f2 0f b7 07 48 83 c6 03 66 89 46 fd 0f b6 47 02 88 46 ff 48 39 d6 75 e9 eb 9a 8d 42 ff 48 8d 54 86 04 8b 07 48 83 c6 04 <89> 46 fc 48 39 d6 75 f2 eb 82 66 2e 0f 1f 84 00 00 00 00 00 66 [ 1416.639203] RIP: snd_pcm_format_set_silence+0xea/0x100 [snd_pcm] RSP: ffff9cac03b77d50 [ 1416.641594] CR2: ffff9cac03b51000 [ 1416.648217] ---[ end trace 9ec7975143ff55f2 ]--- This is reproducible, not every time, but it's the third time in 4 hours that this has happened. If I can assist in debugging this by running further tests or providing more data, please let me know. Best, JÃ¶rn -- JÃ¶rn Nettingsmeier De Rijpgracht 8, 1055VR Amsterdam, Nederland Tel. +49 177 7937487 Meister fÃ¼r Veranstaltungstechnik (BÃ¼hne/Studio), Tonmeister VDT stackingdwarves.net _______________________________________________ Alsa-devel mailing list Alsa-devel(a)alsa-project.org mailman.alsa-project.org/mailman/listinfo/alsa-devel

1 0

[PATCH v2] ASoC: qcom: fix Kconfig for SC7280
by Srinivas Kandagatla 10 Mar '22

10 Mar '22

select would force the symbol to value without checking the dependencies. In this case selecting TX and RX MACROs directly without checking its dependency on COMMON_CLK would break builds on platform which do no set COMMON_CLK. ex: WARNING: unmet direct dependencies detected for SND_SOC_LPASS_RX_MACRO Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMMON_CLK [=n] Selected by [m]: - SND_SOC_SC7280 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_QCOM [=m] && I2C [=y] && SOUNDWIRE [=m] move select to imply which should enforce symbol to be set to 'n' if any dependencies are not resolved. Fixes: 57350bd41c3a ("ASoC: qcom: SC7280: Add machine driver") Reported-by: Randy Dunlap <rdunlap(a)infradead.org> Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- Changes since v1: - rebased on sound-next sound/soc/qcom/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 82f5eafb2f6c..28d0dfb4033c 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -195,8 +195,8 @@ config SND_SOC_SC7280 select SND_SOC_MAX98357A select SND_SOC_WCD938X_SDW select SND_SOC_LPASS_MACRO_COMMON - select SND_SOC_LPASS_RX_MACRO - select SND_SOC_LPASS_TX_MACRO + imply SND_SOC_LPASS_RX_MACRO + imply SND_SOC_LPASS_TX_MACRO help Add support for audio on Qualcomm Technologies Inc. SC7280 SoC-based systems. -- 2.21.0

2 1

[PATCH 00/20] ALSA/ASoC/SOF/Intel: improve support for ES8336-based platforms
by Pierre-Louis Bossart 10 Mar '22

10 Mar '22

This patchset adds a number of improvements for ES8336-based Intel platforms, which are not well supported at all in Linux. Since Christmas 2021, we've seen dozens of reports of broken audio [1]. The fundamental problem is that those platforms were built for Windows but using an I2S codec - instead of the HDaudio traditional solution. As a result, we are missing all the usual information needed to configure the audio card (which I2S, what configuration, DMICs or not, etc). The situation is similar to Baytrail with all possible permutations enabled. Some of the information can be discovered by checking the contents of the 'NHLT' ACPI table. This helps discover at run-time which SSP to use, and the number of microphones present. This NHLT-based solution helps remove quirks that were added earlier. Unfortunately, there are still a number of platform properties that are not described by ACPI, just as GPIOs used for speakers, jack detection inversion, etc. For some case, quirks are still provided in the machine drivers. Additional work will likely be needed, e.g. to detect which MCLK needs to be used, refine the UCM settings, add the ES8326 codec driver, but this is a first-step towards an 'out of the box' experience on Intel platforms. This patchset touches the sound/hda/intel-nhlt parts but should IMHO be merged in the ASoC tree. I would like to acknowledge the help of Nikolai Kostrigin, Mauro Carvalho Chehab, Huajun Li, David Yang (@yangxiaohua2009) and other GitHub testers. [1] https://github.com/thesofproject/linux/issues?q=is%3Aissue+is%3Aopen+label%… Nikolai Kostrigin (1): ASoC: Intel: soc-acpi: add ESSX8336 support on Cannon Lake machines Pierre-Louis Bossart (19): ASoC: soc-acpi: fix kernel-doc descriptor ASoC: soc-acpi: add information on I2S/TDM link mask ASoC: SOF: Intel: hda: retrieve DMIC number for I2S boards ALSA: intel-nhlt: add helper to detect SSP link mask ASoC: SOF: Intel: hda: report SSP link mask to machine driver ASoC: Intel: soc-acpi: quirk topology filename dynamically ALSA: intel-dsp-config: add more ACPI HIDs for ES83x6 devices ASoC: Intel: soc-acpi: add more ACPI HIDs for ES83x6 devices ALSA: intel-dspconfig: add ES8336 support for CNL ASoC: Intel: sof_es8336: make gpio optional ASoC: Intel: sof_es8336: get codec device with ACPI instead of bus search ASoC: Intel: Revert "ASoC: Intel: sof_es8336: add quirk for Huawei D15 2021" ASoC: Intel: sof_es8336: use NHLT information to set dmic and SSP ASoC: Intel: sof_es8336: log all quirks ASoC: Intel: sof_es8336: move comment to the right place ASoC: Intel: sof_es8336: add support for JD inverted quirk ASoC: Intel: sof_es8336: extend machine driver to support ES8326 codec ASoC: Intel: sof_es8336: add cfg-dmics component for UCM support ASoC: Intel: bytcht_es8316: move comment to the right place include/sound/intel-nhlt.h | 22 ++- include/sound/soc-acpi.h | 27 +++- sound/hda/intel-dsp-config.c | 36 +++-- sound/hda/intel-nhlt.c | 22 +++ sound/soc/intel/boards/Kconfig | 3 +- sound/soc/intel/boards/bytcht_es8316.c | 2 +- sound/soc/intel/boards/sof_es8336.c | 142 +++++++++++++----- .../intel/common/soc-acpi-intel-bxt-match.c | 12 +- .../intel/common/soc-acpi-intel-cml-match.c | 12 +- .../intel/common/soc-acpi-intel-cnl-match.c | 14 ++ .../intel/common/soc-acpi-intel-glk-match.c | 12 +- .../intel/common/soc-acpi-intel-jsl-match.c | 12 +- .../intel/common/soc-acpi-intel-tgl-match.c | 12 +- sound/soc/sof/intel/hda.c | 120 ++++++++++++--- 14 files changed, 360 insertions(+), 88 deletions(-) base-commit: 0b7daa6bd0a4cab3b0c6f266a8cb1344ce14ef19 -- 2.30.2

4 30

[PATCH 2/2] ASoC: SOF: amd: Remove unneeded semicolon
by Jiapeng Chong 10 Mar '22

10 Mar '22

Fix the following coccicheck warnings: ./sound/soc/sof/amd/acp-ipc.c:74:2-3: Unneeded semicolon. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> --- sound/soc/sof/amd/acp-ipc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/amd/acp-ipc.c b/sound/soc/sof/amd/acp-ipc.c index 9fcd2535fd3b..e1842f037083 100644 --- a/sound/soc/sof/amd/acp-ipc.c +++ b/sound/soc/sof/amd/acp-ipc.c @@ -71,7 +71,7 @@ int acp_sof_ipc_send_msg(struct snd_sof_dev *sdev, struct snd_sof_ipc_msg *msg) dev_err(sdev->dev, "%s: Failed to acquire HW lock\n", __func__); return -EINVAL; } - }; + } acp_mailbox_write(sdev, offset, msg->msg_data, msg->msg_size); acp_ipc_host_msg_set(sdev); -- 2.20.1.7.g153144c

2 2