- Alsa-devel - mailman.alsa-project.org

[PATCH v7] ASoC: tas2781: Add tas2781 driver
by Shenghao Ding 27 Mar '23

27 Mar '23

Create tas2781 driver. Signed-off-by: Shenghao Ding <13916275206(a)139.com> --- Changes in v7: - remove unneeded blank lines - tasdevice_parse_dt as void - In tasdevice_i2c_probe, return -ENOMEM directly if kzalloc failed, and remove " && tas_dev" after the "out" label - in tas2781_set_global_mode, removed unneeded inits - Add some comments on the use cases for global broadcast mode - remove unneeded break - add comments on firmware loading error | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202303251653.7HZjyxTf-lkp@intel.com/ - rewrite check_inblock_yram and check_inpage_yram - Add comment on calibrated data load twice if it failed during bootup. - switch kcalloc to kzalloc, for one element memory alloc. - rewrite tasdevice_select_cfg_blk for better indentation - add an output paramin tasdevice_add_config to save the error - Add comment on why create the kcontrol via devm_kzalloc Changes to be committed: modified: sound/soc/codecs/Kconfig modified: sound/soc/codecs/Makefile new file: sound/soc/codecs/tas2781-dsp.c new file: sound/soc/codecs/tas2781-dsp.h new file: sound/soc/codecs/tas2781-i2c.c new file: sound/soc/codecs/tas2781.h --- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2781-dsp.c | 2232 ++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2781-dsp.h | 180 +++ sound/soc/codecs/tas2781-i2c.c | 1650 +++++++++++++++++++++++ sound/soc/codecs/tas2781.h | 159 +++ 6 files changed, 4235 insertions(+) create mode 100644 sound/soc/codecs/tas2781-dsp.c create mode 100644 sound/soc/codecs/tas2781-dsp.h create mode 100644 sound/soc/codecs/tas2781-i2c.c create mode 100644 sound/soc/codecs/tas2781.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 07747565c3b5..e1afe1ced5d7 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -229,6 +229,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2764 imply SND_SOC_TAS2770 imply SND_SOC_TAS2780 + imply SND_SOC_TAS2781 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1637,6 +1638,17 @@ config SND_SOC_TAS2780 Enable support for Texas Instruments TAS2780 high-efficiency digital input mono Class-D audio power amplifiers. +config SND_SOC_TAS2781 + tristate "Texas Instruments TAS2781 speaker amplifier" + depends on I2C + select REGMAP_I2C + select CRC8 + help + Enable support for Texas Instruments TAS2781 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + Note the TAS2781 driver implements a flexible and configurable + algo coff setting, for one, two, even multiple TAS2781 chips. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f1ca18f7946c..5559b9e9cc17 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -262,6 +262,7 @@ snd-soc-tas5805m-objs := tas5805m.o snd-soc-tas6424-objs := tas6424.o snd-soc-tda7419-objs := tda7419.o snd-soc-tas2770-objs := tas2770.o +snd-soc-tas2781-objs := tas2781-i2c.o tas2781-dsp.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -619,6 +620,7 @@ obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o +obj-$(CONFIG_SND_SOC_TAS2781) += snd-soc-tas2781.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2781-dsp.c b/sound/soc/codecs/tas2781-dsp.c new file mode 100644 index 000000000000..6a0e9fb5e20f --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.c @@ -0,0 +1,2232 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/fs.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/string.h> + +#include "tas2781.h" + +#define ERROR_PRAM_CRCCHK 0x0000000 +#define ERROR_YRAM_CRCCHK 0x0000001 +#define PPC_DRIVER_CRCCHK 0x00000200 + +#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) +#define TAS2781_YRAM_BOOK1 140 +#define TAS2781_YRAM1_PAGE 42 +#define TAS2781_YRAM1_START_REG 88 + +#define TAS2781_YRAM2_START_PAGE 43 +#define TAS2781_YRAM2_END_PAGE 49 +#define TAS2781_YRAM2_START_REG 8 +#define TAS2781_YRAM2_END_REG 127 + +#define TAS2781_YRAM3_PAGE 50 +#define TAS2781_YRAM3_START_REG 8 +#define TAS2781_YRAM3_END_REG 27 + +/*should not include B0_P53_R44-R47 */ +#define TAS2781_YRAM_BOOK2 0 +#define TAS2781_YRAM4_START_PAGE 50 +#define TAS2781_YRAM4_END_PAGE 60 + +#define TAS2781_YRAM5_PAGE 61 +#define TAS2781_YRAM5_START_REG 8 +#define TAS2781_YRAM5_END_REG 27 + +#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 +#define MAIN_ALL_DEVICES_1X 0x01 +#define MAIN_DEVICE_A_1X 0x02 +#define MAIN_DEVICE_B_1X 0x03 +#define MAIN_DEVICE_C_1X 0x04 +#define MAIN_DEVICE_D_1X 0x05 +#define COEFF_DEVICE_A_1X 0x12 +#define COEFF_DEVICE_B_1X 0x13 +#define COEFF_DEVICE_C_1X 0x14 +#define COEFF_DEVICE_D_1X 0x15 +#define PRE_DEVICE_A_1X 0x22 +#define PRE_DEVICE_B_1X 0x23 +#define PRE_DEVICE_C_1X 0x24 +#define PRE_DEVICE_D_1X 0x25 + +struct tas_crc { + unsigned char offset; + unsigned char len; +}; + +const char deviceNumber[TASDEVICE_DSP_TAS_MAX_DEVICE] = { + 1, 2, 1, 2, 1, 1, 0, 2, 4, 3, 1, 2, 3, 4 +}; + +static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + block->type = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], + data[offset + 3]); + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: PChkSumPresent error\n", __func__); + offset = -EINVAL; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnPChkSum error\n", __func__); + offset = -EINVAL; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: YChkSumPresent error\n", __func__); + offset = -EINVAL; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnYChkSum error\n", __func__); + offset = -EINVAL; + goto out; + } + block->ychksum = data[offset]; + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: blk_size error\n", __func__); + offset = -EINVAL; + goto out; + } + block->blk_size = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); + offset = -EINVAL; + goto out; + } + block->nr_subblocks = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + block->data = kzalloc(block->blk_size, GFP_KERNEL); + if (!block->data) { + offset = -EINVAL; + goto out; + } + memcpy(block->data, &data[offset], block->blk_size); + offset += block->blk_size; + +out: + return offset; +} + +static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = fmw->data; + struct tasdev_blk *blk; + unsigned int nr_block; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + img_data->nr_blk = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], data[offset + 3]); + offset += 4; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (!img_data->dev_blks) { + offset = -ENOMEM; + goto out; + } + + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + blk = &(img_data->dev_blks[nr_block]); + offset = fw_parse_block_data_kernel(tas_fmw, blk, fmw, offset); + if (offset < 0) { + offset = -EINVAL; + break; + } + } + +out: + return offset; +} + +static int fw_parse_program_data_kernel( + struct tasdevice_priv *tas_dev, struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned int nr_program; + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: AppMode error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "PDMI2SMode err\n"); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: ISnsPD error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: VSnsPD error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + //skip 3-byte reserved + offset += 3; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: PowerLDG err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + offset = fw_parse_data_kernel(tas_fmw, &(program->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } + +out: + return offset; +} + +static int fw_parse_configuration_data_kernel( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + struct tasdevice_config *config; + unsigned int nr_conf; + + for (nr_conf = 0; nr_conf < tas_fmw->nr_configurations; nr_conf++) { + config = &(tas_fmw->configs[nr_conf]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -EINVAL; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "orientation err\n"); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Devices error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 1; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: Program error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "SamplingRate err\n"); + offset = -EINVAL; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLSrc error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: FsRate error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLRate err\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + offset = fw_parse_data_kernel(tas_fmw, + &(config->dev_data), fmw, offset); + if (offset < 0) + goto out; + } + +out: + return offset; +} + +static int fw_parse_variable_header_kernel( + struct tasdevice_priv *tas_dev, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_prog *program; + struct tasdevice_config *config; + const unsigned char *buf = fmw->data; + unsigned int nr_program, nr_configs; + unsigned short max_confs; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device_family = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "%s:not TAS device\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: Device error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "Unsupported dev %d\n", fw_hdr->device); + offset = -EINVAL; + goto out; + } + offset += 2; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin mismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, tas_dev->ndev); + offset = -EINVAL; + goto out; + } + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPrograms error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_programs = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + if (tas_fmw->nr_programs == 0 || tas_fmw->nr_programs > + TASDEVICE_MAXPROGRAM_NUM_KERNEL) { + dev_err(tas_dev->dev, "%s: mnPrograms is invalid\n", __func__); + offset = -EINVAL; + goto out; + } + + if (offset + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { + dev_err(tas_dev->dev, "%s: mpPrograms error\n", __func__); + offset = -EINVAL; + goto out; + } + + tas_fmw->programs = kcalloc(tas_fmw->nr_programs, + sizeof(struct tasdevice_prog), GFP_KERNEL); + if (!tas_fmw->programs) { + offset = -ENOMEM; + goto out; + } + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + program->prog_size = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + } + + /* Skip the unused prog_size + * nr_program == tas_fmw->nr_programs, nr_program is shorter than + * tas_fmw->nr_programs, avoid more than 80 chars + */ + offset += (4 * (TASDEVICE_MAXPROGRAM_NUM_KERNEL - nr_program)); + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: Configurations error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + /* The max of conf for more than equal to 4 pcs of devices is different + * from the one less than 4 pcs of tas2781s. + */ + max_confs = (fw_hdr->ndev >= 4) ? + TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS : + TASDEVICE_MAXCONFIG_NUM_KERNEL; + if (tas_fmw->nr_configurations == 0 || + tas_fmw->nr_configurations > max_confs) { + dev_err(tas_dev->dev, "%s: Conf is invalid\n", __func__); + offset = -EINVAL; + goto out; + } + + if (offset + 4 * max_confs > fmw->size) { + dev_err(tas_dev->dev, "%s: mpConfigurations err\n", __func__); + offset = -EINVAL; + goto out; + } + + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + if (!tas_fmw->configs) { + offset = -ENOMEM; + goto out; + } + + for (nr_configs = 0; nr_configs < tas_fmw->nr_programs; + nr_configs++) { + config = + &(tas_fmw->configs[nr_configs]); + config->cfg_size = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + } + + /* Skip the unused configs */ + offset += 4 * (max_confs - nr_configs); + +out: + return offset; +} + +static int tasdevice_load_block_kernel( + struct tasdevice_priv *tasdevice, struct tasdev_blk *block) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tasdevice->fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + const unsigned int blk_size = block->blk_size; + unsigned int i, length; + unsigned char *data = block->data; + unsigned char dev_idx = 0; + + if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + switch (block->type) { + case MAIN_ALL_DEVICES_1X: + dev_idx = 0x80; + break; + case MAIN_DEVICE_A_1X: + dev_idx = 0x81; + break; + case COEFF_DEVICE_A_1X: + case PRE_DEVICE_A_1X: + dev_idx = 0xC1; + break; + case MAIN_DEVICE_B_1X: + dev_idx = 0x82; + break; + case COEFF_DEVICE_B_1X: + case PRE_DEVICE_B_1X: + dev_idx = 0xC2; + break; + case MAIN_DEVICE_C_1X: + dev_idx = 0x83; + break; + case COEFF_DEVICE_C_1X: + case PRE_DEVICE_C_1X: + dev_idx = 0xC3; + break; + case MAIN_DEVICE_D_1X: + dev_idx = 0x84; + break; + case COEFF_DEVICE_D_1X: + case PRE_DEVICE_D_1X: + dev_idx = 0xC4; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } else { + switch (block->type) { + case MAIN_ALL_DEVICES: + dev_idx = 0|0x80; + break; + case MAIN_DEVICE_A: + dev_idx = 0x81; + break; + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + dev_idx = 0xC1; + break; + case MAIN_DEVICE_B: + dev_idx = 0x82; + break; + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + dev_idx = 0xC2; + break; + case MAIN_DEVICE_C: + dev_idx = 0x83; + break; + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + dev_idx = 0xC3; + break; + case MAIN_DEVICE_D: + dev_idx = 0x84; + break; + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + dev_idx = 0xC4; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } + + for (i = 0, length = 0; i < block->nr_subblocks; i++) { + int rc = tasdevice_process_block(tasdevice, data + length, + dev_idx, blk_size - length); + if (rc < 0) { + dev_err(tasdevice->dev, + "%s: %u %u sublock write error\n", + __func__, length, blk_size); + break; + } + length += (unsigned int)rc; + if (blk_size < length) { + dev_err(tasdevice->dev, + "%s: %u %u out of boundary\n", + __func__, length, blk_size); + break; + } + } + + return 0; +} + +static int fw_parse_variable_header_git(struct tasdevice_priv + *tas_dev, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + const unsigned char *buf = fmw->data; + int len = strlen((char *)&buf[offset]); + + len++; + + if (offset + len > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + + offset += len; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "%s: not TAS device\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "Unsupported dev %d\n", fw_hdr->device); + offset = -EINVAL; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin mismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, + tas_dev->ndev); + offset = -EINVAL; + } + +out: + return offset; +} + +static int fw_parse_variable_hdr_cal(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + const unsigned char *buf = fmw->data; + int len = strlen((char *)&buf[offset]); + + len++; + + if (offset + len > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + + offset += len; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: DeviceFamily error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "%s: not TAS device\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: Device error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "Unsupported dev %d\n", fw_hdr->device); + offset = -EINVAL; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != 1) { + dev_err(tas_dev->dev, + "%s: calbin must be 1, but currently ndev(%u)\n", + __func__, fw_hdr->ndev); + offset = -EINVAL; + } + +out: + return offset; +} + +static inline void tas2781_clear_calfirmware(struct tasdevice_fw + *tas_fmw) +{ + unsigned int blks; + int i; + + if (tas_fmw->calibrations) { + struct tasdevice_calibration *calibration; + + for (i = 0; i < tas_fmw->nr_calibrations; i++) { + calibration = &(tas_fmw->calibrations[i]); + if (calibration) { + struct tasdevice_data *im = + &(calibration->dev_data); + + if (im->dev_blks) { + struct tasdev_blk *block; + + for (blks = 0; blks < im->nr_blk; + blks++) { + block = &(im->dev_blks[blks]); + kfree(block->data); + } + kfree(im->dev_blks); + } + } + } + kfree(tas_fmw->calibrations); + } + kfree(tas_fmw); +} + +static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Type error\n", __func__); + offset = -EINVAL; + goto out; + } + block->type = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= + PPC_DRIVER_CRCCHK) { + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "PChkSumPresent error\n"); + offset = -EINVAL; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: PChkSum error\n", __func__); + offset = -EINVAL; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "YChkSumPresent error\n"); + offset = -EINVAL; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: YChkSum error\n", __func__); + offset = -EINVAL; + goto out; + } + block->ychksum = data[offset]; + offset++; + } else { + block->is_pchksum_present = 0; + block->is_ychksum_present = 0; + } + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Commands error\n", __func__); + offset = -EINVAL; + goto out; + } + block->nr_cmds = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + n = block->nr_cmds * 4; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, + "%s: File Size(%lu) error offset = %d n = %d\n", + __func__, (unsigned long)fmw->size, offset, n); + offset = -EINVAL; + goto out; + } + block->data = kmemdup(&data[offset], n, GFP_KERNEL); + if (!block->data) { + offset = -ENOMEM; + goto out; + } + offset += n; + +out: + return offset; +} + +static int fw_parse_data(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = (unsigned char *)fmw->data; + struct tasdev_blk *blk; + unsigned int nr_block; + int n; + + if (offset + 64 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Name error\n", __func__); + offset = -EINVAL; + goto out; + } + memcpy(img_data->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, "%s: Description error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += n; + + if (offset + 2 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Blocks error\n", __func__); + offset = -EINVAL; + goto out; + } + img_data->nr_blk = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (!img_data->dev_blks) { + offset = -ENOMEM; + goto out; + } + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + blk = &(img_data->dev_blks[nr_block]); + offset = fw_parse_block_data(tas_fmw, blk, fmw, offset); + if (offset < 0) { + offset = -EINVAL; + goto out; + } + } + +out: + return offset; +} + +static int fw_parse_calibration_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_calibration *calibration; + unsigned char *data = (unsigned char *)fmw->data; + unsigned int nr_calibration = 0; + unsigned int n; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: Calibrations error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_calibrations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_calibrations != 1) { + dev_err(tas_dev->dev, + "%s: only support one calibraiton(%d)!\n", + __func__, tas_fmw->nr_calibrations); + goto out; + } + + tas_fmw->calibrations = + kcalloc(tas_fmw->nr_calibrations, + sizeof(struct tasdevice_calibration), GFP_KERNEL); + if (!tas_fmw->calibrations) { + offset = -ENOMEM; + goto out; + } + for (nr_calibration = 0; nr_calibration < tas_fmw->nr_calibrations; + nr_calibration++) { + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "Calibrations error\n"); + offset = -EINVAL; + goto out; + } + calibration = &(tas_fmw->calibrations[nr_calibration]); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "Description err\n"); + offset = -EINVAL; + goto out; + } + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Prog err, offset = %d\n", + __func__, offset); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Conf err, offset = %d\n", + __func__, offset); + offset = -EINVAL; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(calibration->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } + +out: + return offset; +} + +static int fw_parse_program_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *buf = (unsigned char *)fmw->data; + struct tasdevice_prog *program; + int nr_program; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_programs = SMS_HTONS(buf[offset], buf[offset + 1]); + offset += 2; + + if (tas_fmw->nr_programs == 0) { + /*Not error in calibration Data file, return directly*/ + dev_info(tas_dev->dev, "%s: No Programs data, maybe calbin\n", + __func__); + goto out; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, sizeof(struct tasdevice_prog), + GFP_KERNEL); + if (!tas_fmw->programs) { + offset = -ENOMEM; + goto out; + } + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + int n = 0; + + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 64; + + n = strlen((char *)&buf[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "Description err\n"); + offset = -EINVAL; + goto out; + } + + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: AppMode err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "PDMI2SMode err\n"); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: ISnsPD error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: VSnsPD error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: PowerLDG err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(program->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } + +out: + return offset; +} + +static int fw_parse_configuration_data( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + struct tasdevice_config *config; + unsigned int n_configs; + int n; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_configurations == 0) { + dev_err(tas_dev->dev, "%s: Conf is zero\n", __func__); + /*Not error for calibration Data file, return directly*/ + goto out; + } + tas_fmw->configs = + kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + if (!tas_fmw->configs) { + offset = -ENOMEM; + goto out; + } + for (n_configs = 0; n_configs < tas_fmw->nr_configurations; + n_configs++) { + config = + &(tas_fmw->configs[n_configs]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size err\n", __func__); + offset = -EINVAL; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "Description err\n"); + offset = -EINVAL; + goto out; + } + + offset += n; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "Device_orientation err\n"); + offset = -EINVAL; + goto out; + } + offset += 2; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Program err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "SampleRate err\n"); + offset = -EINVAL; + goto out; + } + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLSrc err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLRate err\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFsRate err\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + + offset = fw_parse_data(tas_fmw, &(config->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } + +out: + return offset; +} + +static int fw_parse_header(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + const unsigned char magic_number[] = { 0x35, 0x35, 0x35, 0x32 }; + const unsigned char *buf = (unsigned char *)fmw->data; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + if (memcmp(&buf[offset], magic_number, 4)) { + dev_err(tas_dev->dev, "%s: Magic num NOT match\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWSize error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_fixed_hdr->fwsize = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + if (fw_fixed_hdr->fwsize != fmw->size) { + dev_err(tas_dev->dev, "File size not match, %lu %u", + (unsigned long)fmw->size, fw_fixed_hdr->fwsize); + offset = -EINVAL; + goto out; + } + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnChecksum error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPPCVersion error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_fixed_hdr->ppcver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWVersion error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDriverVersion error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_fixed_hdr->drv_ver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnTimeStamp error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDDCName error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 64; + + out: + return offset; +} + +static bool check_inpage_yram_bk1(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (page == TAS2781_YRAM1_PAGE) { + if (reg >= TAS2781_YRAM1_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg + len > TAS2781_YRAM1_START_REG) { + cd->offset = TAS2781_YRAM1_START_REG; + cd->len = len - (TAS2781_YRAM1_START_REG - reg); + in = true; + } + } else if (page == TAS2781_YRAM3_PAGE) { + if (reg <= TAS2781_YRAM3_END_REG && + reg >= TAS2781_YRAM3_START_REG) { + if ((reg + len) > TAS2781_YRAM3_END_REG) + cd->len = TAS2781_YRAM3_END_REG - reg + 1; + else + cd->len = len; + in = true; + cd->offset = reg; + } else if (reg < TAS2781_YRAM3_START_REG) { + if (reg + len - 1 >= TAS2781_YRAM3_START_REG) { + cd->offset = TAS2781_YRAM3_START_REG; + cd->len = + len - (TAS2781_YRAM3_START_REG - reg); + in = true; + } + } + } + + return in; +} + +static bool check_inpage_yram_bk2(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (page == TAS2781_YRAM5_PAGE) { + if (reg <= TAS2781_YRAM5_END_REG && + reg >= TAS2781_YRAM5_START_REG) { + if (reg + len > TAS2781_YRAM5_END_REG) + cd->len = TAS2781_YRAM5_END_REG - reg + 1; + else + cd->len = len; + cd->offset = reg; + in = true; + } else if (reg < TAS2781_YRAM5_START_REG) { + if (reg + len - 1 >= TAS2781_YRAM5_START_REG) { + cd->offset = TAS2781_YRAM5_START_REG; + cd->len = len - TAS2781_YRAM5_START_REG + reg; + in = true; + } + } + } + + return in; +} + +/* Return Code: + * true -- the registers are in the inpage yram + * false -- the registers are NOT in the inpage yram + */ +static bool check_inpage_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1) + in = check_inpage_yram_bk1(cd, page, reg, len); + else if (book == TAS2781_YRAM_BOOK2) + in = check_inpage_yram_bk2(cd, page, reg, len); + + return in; +} + +static bool check_inblock_yram_bk1(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (page >= TAS2781_YRAM2_START_PAGE && + page <= TAS2781_YRAM2_END_PAGE) { + if (reg <= TAS2781_YRAM2_END_REG && + reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg < TAS2781_YRAM2_START_REG) { + if (reg + len - 1 >= TAS2781_YRAM2_START_REG) { + cd->offset = TAS2781_YRAM2_START_REG; + cd->len = reg + len - TAS2781_YRAM2_START_REG; + in = true; + } + } + } + + return in; +} + +static bool check_inblock_yram_bk2(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (page >= TAS2781_YRAM4_START_PAGE && + page <= TAS2781_YRAM4_END_PAGE) { + if (reg <= TAS2781_YRAM2_END_REG && + reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg < TAS2781_YRAM2_START_REG) { + if (reg + len - 1 >= TAS2781_YRAM2_START_REG) { + cd->offset = TAS2781_YRAM2_START_REG; + cd->len = reg + len - TAS2781_YRAM2_START_REG; + in = true; + } + } + } + + return in; +} + +/* Return Code: + * true -- the registers are in the inblock yram + * false -- the registers are NOT in the inblock yram + */ +static bool check_inblock_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1) + in = check_inblock_yram_bk1(cd, page, reg, len); + else if (book == TAS2781_YRAM_BOOK2) + in = check_inblock_yram_bk2(cd, page, reg, len); + + return in; +} + +static bool check_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in; + + in = check_inpage_yram(cd, book, page, reg, len); + if (in) + goto end; + in = check_inblock_yram(cd, book, page, reg, len); + +end: + return in; +} + +static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, + enum channel chl, unsigned char book, unsigned char page, + unsigned char reg, unsigned char val) +{ + struct tas_crc crc_data; + unsigned int nData1; + int ret = 0; + bool in; + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg >= TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (reg <= (TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG) + 4))) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + in = check_yram(&crc_data, book, page, reg, 1); + if (!in) + goto end; + ret = tasdevice_dev_read(tasdevice, chl, + TASDEVICE_REG(book, page, reg), &nData1); + if (ret < 0) + goto end; + + if (nData1 != val) { + dev_err(tasdevice->dev, + "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", + book, page, reg, + val, nData1); + tasdevice->tasdevice[chl].err_code |= + ERROR_YRAM_CRCCHK; + ret = -EAGAIN; + goto end; + } + + ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); + +end: + return ret; +} + +static int do_multireg_checksum(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned char book, unsigned char page, + unsigned char reg, unsigned int len) +{ + struct tas_crc crc_data; + unsigned char crc_chksum = 0; + unsigned char nBuf1[128]; + int ret = 0; + int i; + bool in; + + if ((reg + len - 1) > 127) { + ret = -EINVAL; + dev_err(tasdevice->dev, "firmware error\n"); + goto end; + } + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg == TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (len == 4)) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + in = check_yram(&crc_data, book, page, reg, len); + if (!in) + goto end; + + if (len == 1) { + dev_err(tasdevice->dev, "firmware error\n"); + ret = -EINVAL; + goto end; + } + + ret = tasdevice_dev_bulk_read(tasdevice, chn, + TASDEVICE_REG(book, page, crc_data.offset), + nBuf1, crc_data.len); + if (ret < 0) + goto end; + + for (i = 0; i < crc_data.len; i++) { + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID( + TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + >= TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + <= (TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG) + + 4))) + /*DSP swap command, bypass */ + continue; + else + crc_chksum += crc8(tasdevice->crc8_lkp_tbl, &nBuf1[i], + 1, 0); + } + + ret = crc_chksum; + +end: + return ret; +} + +static int tasdev_byte_chksum(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn, unsigned char book, + unsigned char page, unsigned char reg, unsigned char val, + unsigned char *crc_chksum) +{ + int ret = do_singlereg_checksum(tas_dev, chn, book, page, reg, val); + + if (ret > 0) { + *crc_chksum += (unsigned char)ret; + goto end; + } + + if (ret != -EAGAIN) + goto end; + + block->nr_retry--; + if (block->nr_retry > 0) + goto end; + + if ((block->type == MAIN_ALL_DEVICES) || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + +end: + return ret; +} + +static int tasdev_multibyte_chksum(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn, unsigned char book, + unsigned char page, unsigned char reg, unsigned int len, + unsigned char *crc_chksum) +{ + int ret = do_multireg_checksum(tas_dev, chn, book, page, reg, len); + + if (ret > 0) { + *crc_chksum += (unsigned char)ret; + goto end; + } + + if (ret != -EAGAIN) + goto end; + + block->nr_retry--; + if (block->nr_retry > 0) + goto end; + + if ((block->type == MAIN_ALL_DEVICES) || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + +end: + return ret; +} + +static int tasdev_multibytes_wr(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn, unsigned char book, + unsigned char page, unsigned char reg, unsigned char *data, + unsigned int len, unsigned int *nr_cmds, + unsigned char *crc_chksum) +{ + int ret; + + if (len > 1) { + ret = tasdevice_dev_bulk_write(tas_dev, chn, + TASDEVICE_REG(book, page, reg), data + 3, len); + if (ret < 0) + goto end; + if (block->is_ychksum_present) + ret = tasdev_multibyte_chksum(tas_dev, block, chn, + book, page, reg, len, crc_chksum); + } else { + ret = tasdevice_dev_write(tas_dev, + chn, + TASDEVICE_REG(book, page, + reg), + data[3]); + if (ret < 0) + goto end; + if (block->is_ychksum_present) + ret = tasdev_byte_chksum(tas_dev, block, chn, book, + page, reg, data[3], crc_chksum); + } + + if (!block->is_ychksum_present || ret >= 0) { + *nr_cmds += 1; + if (len >= 2) + *nr_cmds += ((len - 2) / 4) + 1; + } + +end: + return ret; +} + +static int tasdev_block_chksum(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn) +{ + unsigned int nr_value; + int ret; + + ret = tasdevice_dev_read(tas_dev, chn, TASDEVICE_I2CChecksum, + &nr_value); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: Chn %d\n", __func__, chn); + if ((block->type == MAIN_ALL_DEVICES) + || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + goto end; + } + + if ((nr_value & 0xff) != block->pchksum) { + dev_err(tas_dev->dev, "%s: Blk PChkSum Chn %d ", __func__, + chn); + dev_err(tas_dev->dev, "PChkSum = 0x%x, Reg = 0x%x\n", + block->pchksum, (nr_value & 0xff)); + tas_dev->tasdevice[chn].err_code |= ERROR_PRAM_CRCCHK; + ret = -EAGAIN; + block->nr_retry--; + + if (block->nr_retry <= 0) { + if ((block->type == MAIN_ALL_DEVICES) + || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + } + } else + tas_dev->tasdevice[chn].err_code &= ~ERROR_PRAM_CRCCHK; + +end: + return ret; +} + +static int tasdev_load_blk(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn) +{ + unsigned int sleep_time; + unsigned int len; + unsigned int nr_cmds; + unsigned char *data = block->data; + unsigned char crc_chksum = 0; + unsigned char offset; + unsigned char book; + unsigned char page; + unsigned char val; + int ret = 0; + + while (block->nr_retry > 0) { + if (block->is_pchksum_present) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_I2CChecksum, 0); + if (ret < 0) + break; + } + + if (block->is_ychksum_present) + crc_chksum = 0; + + nr_cmds = 0; + + while (nr_cmds < block->nr_cmds) { + data = block->data + nr_cmds * 4; + + book = data[0]; + page = data[1]; + offset = data[2]; + val = data[3]; + + nr_cmds++; + /*Single byte write*/ + if (offset <= 0x7F) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(book, page, offset), + val); + if (ret < 0) + goto end; + if (block->is_ychksum_present) { + ret = tasdev_byte_chksum(tas_dev, + block, chn, book, page, offset, + val, &crc_chksum); + if (ret < 0) + break; + } + continue; + } + /*sleep command*/ + if (offset == 0x81) { + /*book -- data[0] page -- data[1]*/ + sleep_time = ((book << 8) + page)*1000; + usleep_range(sleep_time, sleep_time + 50); + continue; + } + /*Multiple bytes write*/ + if (offset == 0x85) { + data += 4; + len = (book << 8) + page; + book = data[0]; + page = data[1]; + offset = data[2]; + ret = tasdev_multibytes_wr(tas_dev, block, chn, + book, page, offset, data, len, + &nr_cmds, &crc_chksum); + if (ret < 0) + break; + } + } + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) /*err in current device, skip it*/ + break; + + if (block->is_pchksum_present) { + ret = tasdev_block_chksum(tas_dev, block, chn); + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) /*err in current device, skip it*/ + break; + } + + if (block->is_ychksum_present) { + /* TBD, open it when FW ready */ + dev_err(tas_dev->dev, + "Blk YChkSum: FW = 0x%x, YCRC = 0x%x\n", + block->ychksum, crc_chksum); + + tas_dev->tasdevice[chn].err_code &= + ~ERROR_YRAM_CRCCHK; + ret = 0; + } + /*skip current blk*/ + break; + } + +end: + return ret; +} + +static int tasdevice_load_block(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block) +{ + int chnend = 0; + int ret = 0; + int chn = 0; + int rc = 0; + + switch (block->type) { + case MAIN_ALL_DEVICES: + chn = 0; + chnend = tas_dev->ndev; + break; + case MAIN_DEVICE_A: + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + chn = 0; + chnend = 1; + break; + case MAIN_DEVICE_B: + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + chn = 1; + chnend = 2; + break; + case MAIN_DEVICE_C: + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + chn = 2; + chnend = 3; + break; + case MAIN_DEVICE_D: + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + chn = 3; + chnend = 4; + break; + default: + dev_dbg(tas_dev->dev, "load blk: Other Type = 0x%02x\n", + block->type); + break; + } + + for (; chn < chnend; chn++) { + block->nr_retry = 6; + if (tas_dev->tasdevice[chn].is_loading == false) + continue; + ret = tasdev_load_blk(tas_dev, block, chn); + if (ret < 0) + dev_err(tas_dev->dev, "dev %d, Blk (%d) load error\n", + chn, block->type); + rc |= ret; + } + + return rc; +} + +static int tasdevice_load_data(struct tasdevice_priv *tas_dev, + struct tasdevice_data *dev_data) +{ + struct tasdev_blk *block; + unsigned int nr_block; + int ret = 0; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tas_dev->tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +static int tasdevice_load_calibrated_data( + struct tasdevice_priv *tas_dev, struct tasdevice_data *dev_data) +{ + struct tasdev_blk *block; + unsigned int nr_block; + int ret = 0; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +int tas2781_load_calibration(void *context, + char *file_name, enum channel i) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + struct tasdevice *tasdev = &(tas_dev->tasdevice[i]); + const struct firmware *fw_entry; + struct tasdevice_fw *tas_fmw; + struct firmware fmw; + int ret, offset = 0; + + ret = request_firmware(&fw_entry, file_name, tas_dev->dev); + if (ret) { + dev_info(tas_dev->dev, + "%s: Request firmware %s failed\n", + __func__, file_name); + goto out; + } + + if (!fw_entry->size) { + dev_err(tas_dev->dev, + "%s: file read error: size = %lu\n", + __func__, (unsigned long)fw_entry->size); + goto out; + } + fmw.size = fw_entry->size; + fmw.data = fw_entry->data; + + tas_fmw = tasdev->cali_data_fmw = kzalloc(sizeof(struct tasdevice_fw), + GFP_KERNEL); + if (!tasdev->cali_data_fmw) { + ret = -ENOMEM; + goto out; + } + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, &fmw, offset); + if (offset == -EINVAL) { + dev_err(tas_dev->dev, "%s: fw_parse_header EXIT!\n", __func__); + ret = offset; + goto out; + } + offset = fw_parse_variable_hdr_cal(tas_dev, tas_fmw, &fmw, offset); + if (offset == -EINVAL) { + dev_err(tas_dev->dev, + "%s: fw_parse_variable_header_cal EXIT!\n", __func__); + ret = offset; + goto out; + } + offset = fw_parse_program_data(tas_dev, tas_fmw, &fmw, offset); + if (offset < 0) { + dev_err(tas_dev->dev, "fw_parse_program_data EXIT!\n"); + ret = offset; + goto out; + } + offset = fw_parse_configuration_data(tas_dev, tas_fmw, &fmw, + offset); + if (offset < 0) { + dev_err(tas_dev->dev, "fw_parse_configuration_data EXIT!\n"); + ret = offset; + goto out; + } + offset = fw_parse_calibration_data(tas_dev, + tas_fmw, &fmw, offset); + if (offset < 0) { + dev_err(tas_dev->dev, "fw_parse_calibration_data EXIT!\n"); + ret = offset; + goto out; + } + tasdev->is_calibrated_data_loaded = true; + +out: + if (fw_entry) { + release_firmware(fw_entry); + fw_entry = NULL; + } + return ret; +} + +static int dspfw_default_callback(struct tasdevice_priv *tas_dev, + unsigned int drv_ver, unsigned int ppcver) +{ + int offset = 0; + + if (drv_ver == 0x100) { + if (ppcver >= PPC3_VERSION) { + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + } else { + switch (ppcver) { + case 0x00: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + dev_err(tas_dev->dev, + "%s: PPCVer must be 0x0 or 0x%02x", + __func__, PPC3_VERSION); + dev_err(tas_dev->dev, " Current:0x%02x\n", + ppcver); + offset = -EINVAL; + break; + } + } + } else { + dev_err(tas_dev->dev, + "DrvVer must be 0x0, 0x230 or above 0x230 "); + dev_err(tas_dev->dev, "current is 0x%02x\n", drv_ver); + offset = -EINVAL; + } + + return offset; +} + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr; + struct tasdevice_fw *tas_fmw; + int offset = 0; + int ret = 0; + + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, "%s: Failed to read firmware %s\n", + __func__, tas_dev->coef_binaryname); + ret = -EINVAL; + goto out; + } + + tas_dev->fmw = kzalloc(sizeof(struct tasdevice_fw), GFP_KERNEL); + if (!tas_dev->fmw) { + ret = -ENOMEM; + goto out; + } + tas_fmw = tas_dev->fmw; + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, fmw, offset); + + if (offset == -EINVAL) + goto out; + fw_fixed_hdr = &(tas_fmw->fw_hdr.fixed_hdr); + /* Support different versions of firmware */ + switch (fw_fixed_hdr->drv_ver) { + case 0x301: + case 0x302: + case 0x502: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + break; + case 0x202: + case 0x400: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + offset = dspfw_default_callback(tas_dev, fw_fixed_hdr->drv_ver, + fw_fixed_hdr->ppcver); + break; + } + + offset = tas_dev->fw_parse_variable_header(tas_dev, fmw, offset); + if (offset < 0) { + ret = offset; + goto out; + } + offset = tas_dev->fw_parse_program_data(tas_dev, tas_fmw, fmw, + offset); + if (offset < 0) { + ret = offset; + goto out; + } + offset = tas_dev->fw_parse_configuration_data(tas_dev, + tas_fmw, fmw, offset); + if (offset < 0) + ret = offset; + +out: + return ret; +} + +void tasdevice_calbin_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice *tasdev; + int i; + + if (!tas_dev) + return; + + for (i = 0; i < tas_dev->ndev; i++) { + tasdev = &(tas_dev->tasdevice[i]); + if (tasdev->cali_data_fmw) { + tas2781_clear_calfirmware( + tasdev->cali_data_fmw); + tasdev->cali_data_fmw = NULL; + } + } +} + +static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog) +{ + struct tasdevice_data *im; + struct tasdev_blk *blk; + unsigned int nr_blk; + + if (!prog) + return; + + im = &(prog->dev_data); + + if (!im->dev_blks) + return; + + for (nr_blk = 0; nr_blk < im->nr_blk; nr_blk++) { + blk = &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); +} + +static void tasdev_dsp_prog_remove(struct tasdevice_prog *prog, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_prog_blk_remove(&prog[i]); + kfree(prog); +} + +static void tasdev_dsp_cfg_blk_remove(struct tasdevice_config *cfg) +{ + struct tasdevice_data *im; + struct tasdev_blk *blk; + unsigned int nr_blk; + + if (cfg) { + im = &(cfg->dev_data); + + if (!im->dev_blks) + return; + + for (nr_blk = 0; nr_blk < im->nr_blk; nr_blk++) { + blk = &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); + } +} + +static void tasdev_dsp_cfg_remove(struct tasdevice_config *config, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_cfg_blk_remove(&config[i]); + kfree(config); +} + +void tasdevice_dsp_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + + if (tas_dev->fmw) { + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + + if (tas_fmw->programs) + tasdev_dsp_prog_remove(tas_fmw->programs, + tas_fmw->nr_programs); + if (tas_fmw->configs) + tasdev_dsp_cfg_remove(tas_fmw->configs, + tas_fmw->nr_configurations); + kfree(tas_fmw); + tas_dev->fmw = NULL; + } +} + +int tasdevice_select_tuningprm_cfg(void *context, int prm_no, + int cfg_no, int rca_conf_no) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_prog *program; + struct tasdevice_config *conf; + int prog_status = 0; + int status, i; + + if (!tas_fmw) { + dev_err(tas_dev->dev, "%s: Firmware is NULL\n", __func__); + goto out; + } + + if (cfg_no >= tas_fmw->nr_configurations) { + dev_err(tas_dev->dev, + "%s: cfg(%d) is not in range of conf %u\n", + __func__, cfg_no, tas_fmw->nr_configurations); + goto out; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_dev->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + goto out; + } + + if (rca_conf_no > rca->ncfgs || rca_conf_no <= 0 || + !cfg_info) { + dev_err(tas_dev->dev, + "conf_no:%d should be in range from 0 to %u\n", + rca_conf_no, rca->ncfgs-1); + goto out; + } + + conf = &(tas_fmw->configs[cfg_no]); + for (i = 0, prog_status = 0; i < tas_dev->ndev; i++) { + if (cfg_info[rca_conf_no]->active_dev & (1 << i)) { + if (tas_dev->tasdevice[i].cur_prog != prm_no) { + tas_dev->tasdevice[i].cur_conf = -1; + tas_dev->tasdevice[i].is_loading = true; + prog_status++; + } + } else + tas_dev->tasdevice[i].is_loading = false; + tas_dev->tasdevice[i].is_loaderr = false; + } + + if (prog_status) { + program = &(tas_fmw->programs[prm_no]); + tasdevice_load_data(tas_dev, &(program->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) + continue; + else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) { + struct tasdevice_fw *cal_fmw = + tas_dev->tasdevice[i].cali_data_fmw; + + if (cal_fmw) { + struct tasdevice_calibration + *calibration = + cal_fmw->calibrations; + + if (calibration) + tasdevice_load_calibrated_data( + tas_dev, + &(calibration->dev_data)); + } + tas_dev->tasdevice[i].cur_prog = prm_no; + } + } + } + + for (i = 0, status = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].cur_conf != cfg_no + && (cfg_info[rca_conf_no]->active_dev & (1 << i)) + && (tas_dev->tasdevice[i].is_loaderr == false)) { + status++; + tas_dev->tasdevice[i].is_loading = true; + } else + tas_dev->tasdevice[i].is_loading = false; + } + + if (status) { + status = 0; + tasdevice_load_data(tas_dev, &(conf->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) { + status |= 1 << (i + 4); + continue; + } else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) + tas_dev->tasdevice[i].cur_conf = cfg_no; + } + } else + dev_err(tas_dev->dev, + "%s: No device is in active in conf %d\n", + __func__, rca_conf_no); + + status |= cfg_info[rca_conf_no]->active_dev; + +out: + return prog_status; +} diff --git a/sound/soc/codecs/tas2781-dsp.h b/sound/soc/codecs/tas2781-dsp.h new file mode 100644 index 000000000000..6c6480fb14b1 --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.h @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TASDEVICE_DSP_H__ +#define __TASDEVICE_DSP_H__ + +#define MAIN_ALL_DEVICES 0x0d +#define MAIN_DEVICE_A 0x01 +#define MAIN_DEVICE_B 0x08 +#define MAIN_DEVICE_C 0x10 +#define MAIN_DEVICE_D 0x14 +#define COEFF_DEVICE_A 0x03 +#define COEFF_DEVICE_B 0x0a +#define COEFF_DEVICE_C 0x11 +#define COEFF_DEVICE_D 0x15 +#define PRE_DEVICE_A 0x04 +#define PRE_DEVICE_B 0x0b +#define PRE_DEVICE_C 0x12 +#define PRE_DEVICE_D 0x16 + +#define PPC3_VERSION 0x4100 +#define RCA_CONFIGID_BYPASS_ALL 0 +#define TASDEVICE_DEVICE_SUM 8 +#define TASDEVICE_CONFIG_SUM 64 + +enum channel { + top_left_Chn, + top_right_chn, + bottom_left_Chn, + bottom_right_chn, + max_chn, +}; + +enum tasdevice_dsp_dev_idx { + TASDEVICE_DSP_TAS_2555 = 0, + TASDEVICE_DSP_TAS_2555_STEREO, + TASDEVICE_DSP_TAS_2557_MONO, + TASDEVICE_DSP_TAS_2557_DUAL_MONO, + TASDEVICE_DSP_TAS_2559, + TASDEVICE_DSP_TAS_2563, + TASDEVICE_DSP_TAS_2563_DUAL_MONO = 7, + TASDEVICE_DSP_TAS_2563_QUAD, + TASDEVICE_DSP_TAS_2563_21, + TASDEVICE_DSP_TAS_2781, + TASDEVICE_DSP_TAS_2781_DUAL_MONO, + TASDEVICE_DSP_TAS_2781_21, + TASDEVICE_DSP_TAS_2781_QUAD, + TASDEVICE_DSP_TAS_MAX_DEVICE +}; + +struct tasdevice_fw_fixed_hdr { + unsigned int fwsize; + unsigned int ppcver; + unsigned int drv_ver; +}; + +struct tasdevice_dspfw_hdr { + struct tasdevice_fw_fixed_hdr fixed_hdr; + unsigned short device_family; + unsigned short device; + unsigned char ndev; +}; + +struct tasdev_blk { + int nr_retry; + unsigned int type; + unsigned char is_pchksum_present; + unsigned char pchksum; + unsigned char is_ychksum_present; + unsigned char ychksum; + unsigned int nr_cmds; + unsigned int blk_size; + unsigned int nr_subblocks; + unsigned char *data; +}; + +struct tasdevice_data { + char name[64]; + unsigned int nr_blk; + struct tasdev_blk *dev_blks; +}; +struct tasdevice_prog { + unsigned int prog_size; + struct tasdevice_data dev_data; +}; + +struct tasdevice_config { + unsigned int cfg_size; + char name[64]; + struct tasdevice_data dev_data; +}; + +struct tasdevice_calibration { + struct tasdevice_data dev_data; +}; + +struct tasdevice_fw { + struct tasdevice_dspfw_hdr fw_hdr; + unsigned short nr_programs; + struct tasdevice_prog *programs; + unsigned short nr_configurations; + struct tasdevice_config *configs; + unsigned short nr_calibrations; + struct tasdevice_calibration *calibrations; + struct device *dev; +}; + +enum tasdevice_dsp_fw_state { + TASDEVICE_DSP_FW_NONE = 0, + TASDEVICE_DSP_FW_PENDING, + TASDEVICE_DSP_FW_FAIL, + TASDEVICE_DSP_FW_ALL_OK, +}; + +enum tasdevice_bin_blk_type { + TASDEVICE_BIN_BLK_COEFF = 1, + TASDEVICE_BIN_BLK_POST_POWER_UP, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN, + TASDEVICE_BIN_BLK_PRE_POWER_UP, + TASDEVICE_BIN_BLK_POST_SHUTDOWN +}; + +struct tasdevice_rca_hdr { + unsigned int img_sz; + unsigned int checksum; + unsigned int binary_version_num; + unsigned int drv_fw_version; + unsigned char plat_type; + unsigned char dev_family; + unsigned char reserve; + unsigned char ndev; + unsigned char devs[TASDEVICE_DEVICE_SUM]; + unsigned int nconfig; + unsigned int config_size[TASDEVICE_CONFIG_SUM]; +}; + +struct tasdev_blk_data { + unsigned char dev_idx; + unsigned char block_type; + unsigned short yram_checksum; + unsigned int block_size; + unsigned int n_subblks; + unsigned char *regdata; +}; + +struct tasdevice_config_info { + unsigned int nblocks; + unsigned int real_nblocks; + unsigned char active_dev; + struct tasdev_blk_data **blk_data; +}; + +struct tasdevice_rca { + struct tasdevice_rca_hdr fw_hdr; + int ncfgs; + struct tasdevice_config_info **cfg_info; + int profile_cfg_id; +}; + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context); +void tasdevice_dsp_remove(void *context); +void tasdevice_calbin_remove(void *context); +int tas2781_load_calibration(void *tas_dev, char *filename, + enum channel i); +int tasdevice_select_tuningprm_cfg(void *context, int prm, + int cfg_no, int rca_conf_no); + +#endif diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c new file mode 100644 index 000000000000..9ed10cd0b7bc --- /dev/null +++ b/sound/soc/codecs/tas2781-i2c.c @@ -0,0 +1,1650 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "tas2781.h" + +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d + +const char *blocktype[5] = { + "COEFF", + "POST_POWER_UP", + "PRE_SHUTDOWN", + "PRE_POWER_UP", + "POST_SHUTDOWN" +}; + +static const struct i2c_device_id tasdevice_id[] = { + { "tas2781", TAS2781 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tasdevice_id); + +static const struct regmap_range_cfg tasdevice_ranges[] = { + { + .range_min = 0, + .range_max = 256 * 128, + .selector_reg = TASDEVICE_PAGE_SELECT, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 128, + }, +}; + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 16, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .ranges = tasdevice_ranges, + .num_ranges = ARRAY_SIZE(tasdevice_ranges), + .max_register = 256 * 128, +}; + +static const struct of_device_id tasdevice_of_match[] = { + { .compatible = "ti,tas2781" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, tasdevice_of_match); + +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + unsigned char subblk_typ = data[1]; + bool is_err = false; + int blktyp = dev_idx & 0xC0; + int idx = dev_idx & 0x3F; + int subblk_offset; + int chn, chnend; + int rc; + + if (idx) { + chn = idx - 1; + chnend = idx; + } else { + if (tas_dev->set_global_mode) { + chn = tas_dev->ndev; + chnend = tas_dev->ndev + 1; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + } + + for (; chn < chnend; chn++) { + if (!tas_dev->set_global_mode && + tas_dev->tasdevice[chn].is_loading == false) + continue; + + is_err = false; + subblk_offset = 2; + switch (subblk_typ) { + case TASDEVICE_CMD_SING_W: { + int i = 0; + unsigned short len = SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 * len > sublocksize) { + dev_err(tas_dev->dev, + "process_block: Out of boundary\n"); + is_err = true; + break; + } + + for (i = 0; i < len; i++) { + rc = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + data[subblk_offset + 3]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "process_block: single write error\n"); + } + subblk_offset += 4; + } + } + break; + case TASDEVICE_CMD_BURST: { + unsigned short len = + SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 + len > sublocksize) { + dev_err(tas_dev->dev, + "%s: BST Out of boundary\n", + __func__); + is_err = true; + break; + } + if (len % 4) { + dev_err(tas_dev->dev, + "%s:Bst-len(%u)not div by 4\n", + __func__, len); + break; + } + + rc = tasdevice_dev_bulk_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + &(data[subblk_offset + 4]), + len); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: bulk_write error = %d\n", + __func__, rc); + } + subblk_offset += (len + 4); + } + break; + case TASDEVICE_CMD_DELAY: { + unsigned int sleep_time = 0; + + if (subblk_offset + 2 > sublocksize) { + dev_err(tas_dev->dev, + "%s: deley Out of boundary\n", + __func__); + is_err = true; + break; + } + sleep_time = SMS_HTONS(data[2], data[3]) * 1000; + usleep_range(sleep_time, sleep_time + 50); + subblk_offset += 2; + } + break; + case TASDEVICE_CMD_FIELD_W: + if (subblk_offset + 6 > sublocksize) { + dev_err(tas_dev->dev, + "%s: bit write Out of boundary\n", + __func__); + is_err = true; + break; + } + rc = tasdevice_dev_update_bits(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset + 2], + data[subblk_offset + 3], + data[subblk_offset + 4]), + data[subblk_offset + 1], + data[subblk_offset + 5]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: update_bits error = %d\n", + __func__, rc); + } + subblk_offset += 6; + break; + default: + break; + }; + if (is_err == true && blktyp != 0) { + if (blktyp == 0x80) { + tas_dev->tasdevice[chn].cur_prog = -1; + tas_dev->tasdevice[chn].cur_conf = -1; + } else + tas_dev->tasdevice[chn].cur_conf = -1; + } + } + + return subblk_offset; +} + +static void tasdevice_select_cfg_blk(void *pContext, int conf_no, + unsigned char block_type) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) pContext; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdev_blk_data **blk_data; + int j, k, chn, chnend; + + if (conf_no >= rca->ncfgs || conf_no < 0 || !cfg_info) { + dev_err(tas_dev->dev, + "conf_no should be not more than %u\n", + rca->ncfgs); + goto out; + } + blk_data = cfg_info[conf_no]->blk_data; + + for (j = 0; j < (int)cfg_info[conf_no]->real_nblocks; j++) { + unsigned int length = 0, rc = 0; + + if (block_type > 5 || block_type < 2) { + dev_err(tas_dev->dev, + "block_type should be in range from 2 to 5\n"); + goto out; + } + if (block_type != blk_data[j]->block_type) + continue; + + for (k = 0; k < (int)blk_data[j]->n_subblks; k++) { + if (cfg_info[conf_no]->blk_data[j]->dev_idx) { + chn = blk_data[j]->dev_idx - 1; + chnend = blk_data[j]->dev_idx; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + for (; chn < chnend; chn++) + tas_dev->tasdevice[chn].is_loading = true; + + rc = tasdevice_process_block(tas_dev, + blk_data[j]->regdata + length, + blk_data[j]->dev_idx, + blk_data[j]->block_size - length); + length += rc; + if (blk_data[j]->block_size < length) { + dev_err(tas_dev->dev, + "%s: %u %u out of boundary\n", + __func__, length, + blk_data[j]->block_size); + break; + } + } + if (length != blk_data[j]->block_size) + dev_err(tas_dev->dev, "%s: %u %u size is not same\n", + __func__, length, blk_data[j]->block_size); + } + +out: + return; +} + +static struct tasdevice_config_info *tasdevice_add_config( + void *context, unsigned char *config_data, + unsigned int config_size, int *status) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + struct tasdevice_config_info *cfg_info; + int config_offset = 0; + int i; + + cfg_info = kzalloc(sizeof(struct tasdevice_config_info), GFP_KERNEL); + if (!cfg_info) { + *status = -ENOMEM; + goto out; + } + + if (tas_dev->rcabin.fw_hdr.binary_version_num >= 0x105) { + if (config_offset + 64 > (int)config_size) { + *status = -EINVAL; + dev_err(tas_dev->dev, "add config: Out of boundary\n"); + goto out; + } + config_offset += 64; + } + + if (config_offset + 4 > (int)config_size) { + *status = -EINVAL; + dev_err(tas_dev->dev, "add config: Out of boundary\n"); + goto out; + } + cfg_info->nblocks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data = kcalloc(cfg_info->nblocks, + sizeof(struct tasdev_blk_data *), GFP_KERNEL); + if (!cfg_info->blk_data) { + *status = -ENOMEM; + goto out; + } + cfg_info->real_nblocks = 0; + for (i = 0; i < (int)cfg_info->nblocks; i++) { + if (config_offset + 12 > config_size) { + *status = -EINVAL; + dev_err(tas_dev->dev, + "%s: Out of boundary: i = %d nblocks = %u!\n", + __func__, i, cfg_info->nblocks); + break; + } + cfg_info->blk_data[i] = kzalloc( + sizeof(struct tasdev_blk_data), GFP_KERNEL); + if (!cfg_info->blk_data[i]) { + *status = -ENOMEM; + break; + } + + cfg_info->blk_data[i]->dev_idx = config_data[config_offset]; + config_offset++; + + cfg_info->blk_data[i]->block_type = config_data[config_offset]; + config_offset++; + + if (cfg_info->blk_data[i]->block_type == + TASDEVICE_BIN_BLK_PRE_POWER_UP) { + if (cfg_info->blk_data[i]->dev_idx == 0) + cfg_info->active_dev = 1; + else + cfg_info->active_dev = + 1 << + (cfg_info->blk_data[i]->dev_idx - 1); + + } + cfg_info->blk_data[i]->yram_checksum = + SMS_HTONS(config_data[config_offset], + config_data[config_offset + 1]); + config_offset += 2; + cfg_info->blk_data[i]->block_size = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data[i]->n_subblks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + + config_offset += 4; + cfg_info->blk_data[i]->regdata = kzalloc( + cfg_info->blk_data[i]->block_size, GFP_KERNEL); + if (!cfg_info->blk_data[i]->regdata) { + *status = -ENOMEM; + goto out; + } + + if (config_offset + cfg_info->blk_data[i]->block_size + > config_size) { + *status = -EINVAL; + dev_err(tas_dev->dev, + "%s: Out of boundary: i = %d blks = %u!\n", + __func__, i, cfg_info->nblocks); + break; + } + memcpy(cfg_info->blk_data[i]->regdata, + &config_data[config_offset], + cfg_info->blk_data[i]->block_size); + config_offset += cfg_info->blk_data[i]->block_size; + cfg_info->real_nblocks += 1; + } + +out: + return cfg_info; +} + +/** + * tas2781_digital_getvol - get the volum control + * @kcontrol: control pointer + * @ucontrol: User data + * Customer Kcontrol for tas2781 is primarily for regmap booking, paging + * depends on internal regmap mechanism. + * tas2781 contains book and page two-level register map, especially + * book switching will set the register BXXP00R7F, after switching to the + * correct book, then leverage the mechanism for paging to access the register. + */ +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int invert = mc->invert; + int max = mc->max; + int ret = 0; + int val; + + /* Read the primary device as the whole */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, "%s, get digital vol error\n", __func__); + goto out; + } + + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int invert = mc->invert; + int max = mc->max; + int err_cnt = 0; + int ret = 1; + int val, i; + + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + + if (!tas_dev->set_global_mode) { + ret = tasdevice_dev_write(tas_dev, tas_dev->ndev, + mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_dev->dev, "%s, error in global mode\n", + __func__); + } + + if (!tas_dev->set_global_mode || ret == 1) { + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, mc->reg, + (unsigned int)val); + if (ret) { + err_cnt++; + dev_err(tas_dev->dev, + "set digital vol err in dev %d\n", i); + } + } + } + + /* All the devices set error, return 0*/ + return (err_cnt == tas_dev->ndev) ? 0 : 1; +} + +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int invert = mc->invert; + unsigned char mask = 0; + int max = mc->max; + int ret = 0; + int val; + + /* Read the primary device */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int invert = mc->invert; + unsigned char mask; + int max = mc->max; + int err_cnt = 0; + int val, i, ret; + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + mc->reg, mask, (unsigned int)(val << mc->shift)); + if (ret) { + err_cnt++; + dev_err(tas_dev->dev, "set AMP vol error in dev %d\n", + i); + } + } + + /* All the devices set error, return 0 */ + return (err_cnt == tas_dev->ndev) ? 0 : 1; +} + +static const DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); +static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); + +static const struct snd_kcontrol_new tas2781_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), +}; + +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + + tas_dev->rcabin.profile_cfg_id = + ucontrol->value.integer.value[0]; + + return 1; +} + +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_programs; + + return 0; +} + +static int tasdevice_info_configurations( + struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec = + snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_configurations - 1; + + return 0; +} + +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 1; + uinfo->value.integer.max = max(0, tas_dev->rcabin.ncfgs); + + return 0; +} + +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = + tas_dev->rcabin.profile_cfg_id; + + return 0; +} + +static int tasdevice_create_controls(struct tasdevice_priv *tas_dev) +{ + struct snd_kcontrol_new *tasdevice_profile_controls; + int nr_controls = 1; + int mix_index = 0; + int ret; + char *name; + + tasdevice_profile_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_profile_controls[0]), + GFP_KERNEL); + if (!tasdevice_profile_controls) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!name) { + ret = -ENOMEM; + goto out; + } + scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "TASDEVICE Profile id"); + tasdevice_profile_controls[mix_index].name = name; + tasdevice_profile_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_profile_controls[mix_index].info = + tasdevice_info_profile; + tasdevice_profile_controls[mix_index].get = + tasdevice_get_profile_id; + tasdevice_profile_controls[mix_index].put = + tasdevice_set_profile_id; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_profile_controls, + nr_controls < mix_index ? nr_controls : mix_index); + +out: + return ret; +} + +static int tasdevice_program_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tasdev = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = tasdev->cur_prog; + + return 0; +} + +static int tasdevice_program_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tasdev = snd_soc_component_get_drvdata(codec); + unsigned int nr_program = ucontrol->value.integer.value[0]; + + tasdev->cur_prog = nr_program; + + return 1; +} + +static int tasdevice_configuration_get( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tasdev = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = tasdev->cur_conf; + + return 0; +} + +static int tasdevice_configuration_put( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int nr_configuration = ucontrol->value.integer.value[0]; + + tas_dev->cur_conf = nr_configuration; + + return 1; +} + +static int tasdevice_dsp_create_control( + struct tasdevice_priv *tas_dev) +{ + struct snd_kcontrol_new *tasdevice_dsp_controls; + char *program_name, *configuration_name; + int nr_controls = 2; + int mix_index = 0; + int ret; + + /* Alloc kcontrol via devm_lzalloc, which don't manually + * free the kcontrol + */ + tasdevice_dsp_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_dsp_controls[0]), GFP_KERNEL); + if (!tasdevice_dsp_controls) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + program_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + configuration_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!program_name || !configuration_name) { + ret = -ENOMEM; + goto out; + } + + scnprintf(program_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "Program"); + tasdevice_dsp_controls[mix_index].name = program_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_programs; + tasdevice_dsp_controls[mix_index].get = + tasdevice_program_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_program_put; + mix_index++; + + scnprintf(configuration_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "Configuration"); + tasdevice_dsp_controls[mix_index].name = configuration_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_configurations; + tasdevice_dsp_controls[mix_index].get = + tasdevice_configuration_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_configuration_put; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_dsp_controls, + nr_controls < mix_index ? nr_controls : mix_index); + +out: + return ret; +} + +static void tasdevice_config_info_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **ci = rca->cfg_info; + int i, j; + + if (!ci) + return; + for (i = 0; i < rca->ncfgs; i++) { + if (!ci[i]) + continue; + if (ci[i]->blk_data) { + for (j = 0; j < (int)ci[i]->real_nblocks; j++) { + if (!ci[i]->blk_data[j]) + continue; + kfree(ci[i]->blk_data[j]->regdata); + kfree(ci[i]->blk_data[j]); + } + kfree(ci[i]->blk_data); + } + kfree(ci[i]); + } + kfree(ci); +} + +static void tasdevice_rca_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + struct tasdevice_config_info **cfg_info = NULL; + struct tasdevice_rca_hdr *fw_hdr; + struct tasdevice_rca *rca; + const struct firmware *fw_entry; + unsigned int total_config_sz = 0; + unsigned char *buf; + int offset = 0; + int ret = 0; + int i; + + mutex_lock(&tas_dev->codec_lock); + rca = &(tas_dev->rcabin); + fw_hdr = &(rca->fw_hdr); + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, "Failed to read %s\n", + tas_dev->rca_binaryname); + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + ret = -EINVAL; + goto out; + } + buf = (unsigned char *)fmw->data; + + fw_hdr->img_sz = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + if (fw_hdr->img_sz != fmw->size) { + dev_err(tas_dev->dev, + "File size not match, %d %u", (int)fmw->size, + fw_hdr->img_sz); + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + ret = -EINVAL; + goto out; + } + + fw_hdr->checksum = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + fw_hdr->binary_version_num = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + if (fw_hdr->binary_version_num < 0x103) { + dev_err(tas_dev->dev, "File version 0x%04x is too low", + fw_hdr->binary_version_num); + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + ret = -EINVAL; + goto out; + } + offset += 4; + fw_hdr->drv_fw_version = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 8; + fw_hdr->plat_type = buf[offset]; + offset += 1; + fw_hdr->dev_family = buf[offset]; + offset += 1; + fw_hdr->reserve = buf[offset]; + offset += 1; + fw_hdr->ndev = buf[offset]; + offset += 1; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "ndev(%u) in rcabin mismatch ndev(%u) in DTS\n", + fw_hdr->ndev, tas_dev->ndev); + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + ret = -EINVAL; + goto out; + } + if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { + dev_err(tas_dev->dev, "rca_ready: Out of boundary!\n"); + ret = -EINVAL; + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + goto out; + } + + for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) + fw_hdr->devs[i] = buf[offset]; + + fw_hdr->nconfig = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { + fw_hdr->config_size[i] = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + total_config_sz += fw_hdr->config_size[i]; + } + + if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { + dev_err(tas_dev->dev, "Bin file error!\n"); + ret = -EINVAL; + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + goto out; + } + + cfg_info = kcalloc(fw_hdr->nconfig, sizeof(*cfg_info), GFP_KERNEL); + if (!cfg_info) { + ret = -EINVAL; + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + goto out; + } + rca->cfg_info = cfg_info; + rca->ncfgs = 0; + for (i = 0; i < (int)fw_hdr->nconfig; i++) { + rca->ncfgs += 1; + cfg_info[i] = tasdevice_add_config(context, &buf[offset], + fw_hdr->config_size[i], &ret); + if (ret) { + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + goto out; + } + offset += (int)fw_hdr->config_size[i]; + } + + tasdevice_create_controls(tas_dev); + + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; + scnprintf(tas_dev->coef_binaryname, 64, "%s_coef.bin", + tas_dev->dev_name); + ret = request_firmware(&fw_entry, tas_dev->coef_binaryname, + tas_dev->dev); + if (ret) { + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + dev_err(tas_dev->dev, "%s: load %s error\n", __func__, + tas_dev->coef_binaryname); + goto out; + } + + ret = tasdevice_dspfw_ready(fw_entry, tas_dev); + release_firmware(fw_entry); + fw_entry = NULL; + if (ret) { + dev_err(tas_dev->dev, "dspfw load %s error\n", + tas_dev->coef_binaryname); + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + goto out; + } + tasdevice_dsp_create_control(tas_dev); + + tas_dev->fw_state = TASDEVICE_DSP_FW_ALL_OK; + + for (i = 0; i < tas_dev->ndev; i++) { + scnprintf(tas_dev->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", + tas_dev->dev_name, tas_dev->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_dev, + tas_dev->cal_binaryname[i], i); + if (ret != 0) + dev_err(tas_dev->dev, + "%s: load %s error, default will effect\n", + __func__, tas_dev->cal_binaryname[i]); + } + +out: + if (tas_dev->fw_state == TASDEVICE_DSP_FW_FAIL) { + /*If DSP FW fail, kcontrol won't be created */ + tasdevice_config_info_remove(tas_dev); + tasdevice_dsp_remove(tas_dev); + } + mutex_unlock(&tas_dev->codec_lock); + if (fmw) + release_firmware(fmw); +} + +static void tasdevice_tuning_switch( + struct tasdevice_priv *tas_dev, int state) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + int profile_cfg_id = 0; + + if (tas_dev->fw_state == TASDEVICE_DSP_FW_FAIL) { + dev_err(tas_dev->dev, "DSP bin file not loaded\n"); + return; + } + + if (state == 0) { + if (tas_dev->cur_prog >= tas_fmw->nr_programs) + /*bypass all in rca is profile id 0*/ + profile_cfg_id = RCA_CONFIGID_BYPASS_ALL; + else { + /*dsp mode or tuning mode*/ + profile_cfg_id = + tas_dev->rcabin.profile_cfg_id; + + tasdevice_select_tuningprm_cfg(tas_dev, + tas_dev->cur_prog, + tas_dev->cur_conf, + profile_cfg_id); + if (tas_dev->set_global_mode) + tas_dev->set_global_mode(tas_dev); + } + + tasdevice_select_cfg_blk(tas_dev, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + } else + tasdevice_select_cfg_blk(tas_dev, + tas_dev->rcabin.profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN); +} + +static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *codec = snd_soc_dapm_to_component(w->dapm); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int state = 1; + + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + if (event == SND_SOC_DAPM_PRE_PMD) + state = 0; + tasdevice_tuning_switch(tas_dev, state); + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + return 0; +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT_E("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0, tasdevice_dapm_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_SPK("SPK", tasdevice_dapm_event), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC") +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"SPK", NULL, "ASI"}, + {"OUT", NULL, "SPK"}, + {"ASI OUT", NULL, "DMIC"} +}; + +static int tasdevice_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *codec = dai->component; + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int ret = 0; + + if (tas_dev->fw_state != TASDEVICE_DSP_FW_ALL_OK) { + dev_err(tas_dev->dev, "DSP bin file not loaded\n"); + ret = -EINVAL; + } + + return ret; +} + +static int tasdevice_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(dai); + unsigned int slot_width; + unsigned int fsrate; + int bclk_rate; + int rc = 0; + + fsrate = params_rate(params); + switch (fsrate) { + case 48000: + case 44100: + break; + default: + dev_err(tas_dev->dev, "%s: incorrect sample rate = %u\n", + __func__, fsrate); + rc = -EINVAL; + goto out; + } + + slot_width = params_width(params); + switch (slot_width) { + case 16: + case 20: + case 24: + case 32: + break; + default: + dev_err(tas_dev->dev, "%s: incorrect slot width = %u\n", + __func__, slot_width); + rc = -EINVAL; + goto out; + } + + bclk_rate = snd_soc_params_to_bclk(params); + if (bclk_rate < 0) { + dev_err(tas_dev->dev, "%s: incorrect bclk rate = %d\n", + __func__, bclk_rate); + rc = bclk_rate; + goto out; + } + +out: + return rc; +} + +static int tasdevice_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(codec_dai); + + tas_dev->sysclk = freq; + + return 0; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .startup = tasdevice_startup, + .hw_params = tasdevice_hw_params, + .set_sysclk = tasdevice_set_dai_sysclk, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2781_codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static void tas2781_reset(struct tasdevice_priv *tas_dev) +{ + int ret, i; + + if (tas_dev->reset) { + gpiod_set_value_cansleep(tas_dev->reset, 0); + usleep_range(500, 1000); + gpiod_set_value_cansleep(tas_dev->reset, 1); + } else { + + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, + TAS2871_REG_SWRESET, + TAS2871_REG_SWRESET_RESET); + if (ret < 0) + dev_err(tas_dev->dev, + "dev %d swreset fail, %d\n", + i, ret); + } + } + usleep_range(1000, 1050); +} + +static int tasdevice_codec_probe( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int ret; + + /* Codec Lock Hold to ensure that codec_probe and firmware parsing and + * loading do not simultaneously execute. + */ + mutex_lock(&tas_dev->codec_lock); + + crc8_populate_msb(tas_dev->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); + tas_dev->codec = codec; + scnprintf(tas_dev->rca_binaryname, 64, "%s_rca.bin", + tas_dev->dev_name); + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL, tas_dev, + tasdevice_rca_ready); + if (ret) + dev_err(tas_dev->dev, "request_firmware_nowait err:0x%08x\n", + ret); + + tas2781_reset(tas_dev); + if (tas_dev->set_global_mode) + tas_dev->set_global_mode(tas_dev); + + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + return ret; +} + +static void tasdevice_deinit(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + + tasdevice_config_info_remove(tas_dev); + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; +} + +static void tasdevice_codec_remove( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + + tasdevice_deinit(tas_dev); +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_codec_probe, + .remove = tasdevice_codec_remove, + .controls = tas2781_snd_controls, + .num_controls = ARRAY_SIZE(tas2781_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static void tasdevice_parse_dt(struct tasdevice_priv *tas_dev) +{ + struct i2c_client *client = (struct i2c_client *)tas_dev->client; + unsigned int dev_addrs[max_chn]; + int rc, i, ndev; + + if (tas_dev->isacpi) { + ndev = device_property_read_u32_array(&client->dev, + "ti,audio-slots", NULL, 0); + if (ndev <= 0) { + ndev = 1; + dev_addrs[0] = client->addr; + } else { + ndev = (ndev < ARRAY_SIZE(dev_addrs)) + ? ndev : ARRAY_SIZE(dev_addrs); + ndev = device_property_read_u32_array(&client->dev, + "ti,audio-slots", dev_addrs, ndev); + } + + tas_dev->irq_info.irq_gpio = + acpi_dev_gpio_irq_get(ACPI_COMPANION(&client->dev), 0); + } else { + struct device_node *np = tas_dev->dev->of_node; + + ndev = of_property_read_variable_u32_array(np, + "ti,audio-slots", dev_addrs, 0, ARRAY_SIZE(dev_addrs)); + if (ndev <= 0) { + ndev = 1; + dev_addrs[0] = client->addr; + } + tas_dev->irq_info.irq_gpio = of_irq_get(np, 0); + } + tas_dev->ndev = ndev; + for (i = 0; i < ndev; i++) + tas_dev->tasdevice[i].dev_addr = dev_addrs[i]; + + if (ndev > 1) { + rc = device_property_read_u32(&client->dev, + "ti,broadcast-addr", + &(tas_dev->glb_addr.dev_addr)); + if (rc) { + dev_err(tas_dev->dev, + "Looking up broadcast-addr failed %d\n", rc); + tas_dev->glb_addr.dev_addr = 0; + } + } + + tas_dev->reset = devm_gpiod_get_optional(&client->dev, + "reset-gpios", GPIOD_OUT_HIGH); + if (IS_ERR(tas_dev->reset)) + dev_err(tas_dev->dev, "%s Can't get reset GPIO\n", + __func__); + + strcpy(tas_dev->dev_name, tasdevice_id[tas_dev->chip_id].name); + + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) { + rc = gpio_request(tas_dev->irq_info.irq_gpio, + "AUDEV-IRQ"); + if (!rc) { + gpio_direction_input( + tas_dev->irq_info.irq_gpio); + + tas_dev->irq_info.irq = + gpio_to_irq(tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, "%s: GPIO %d request error\n", + __func__, tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, + "Looking up irq-gpio property failed %d\n", + tas_dev->irq_info.irq_gpio); +} + +static int tasdevice_change_chn_book(struct tasdevice_priv *tas_dev, + enum channel chn, int book) +{ + struct i2c_client *client = (struct i2c_client *)tas_dev->client; + int ret = 0; + int i; + + if (chn < tas_dev->ndev) { + if (tas_dev->glb_addr.ref_cnt != 0) { + tas_dev->glb_addr.ref_cnt = 0; + tas_dev->glb_addr.cur_book = -1; + } + client->addr = tas_dev->tasdevice[chn].dev_addr; + if (tas_dev->tasdevice[chn].cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, E=%d\n", + __func__, ret); + goto out; + } + tas_dev->tasdevice[chn].cur_book = book; + } + } else if (chn == tas_dev->ndev) { + /* Chn == device number will enable global broadcast mode*/ + if (tas_dev->glb_addr.ref_cnt == 0) + for (i = 0; i < tas_dev->ndev; i++) + tas_dev->tasdevice[i].cur_book = -1; + client->addr = tas_dev->glb_addr.dev_addr; + if (tas_dev->glb_addr.cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_PAGE, 0); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, E=%d\n", + __func__, ret); + goto out; + } + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, book%x, E=%d\n", + __func__, book, ret); + goto out; + } + tas_dev->glb_addr.cur_book = book; + } + + tas_dev->glb_addr.ref_cnt++; + } else { + ret = -EINVAL; + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + } + +out: + return ret; +} + +int tasdevice_dev_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int *val) +{ + int ret = 0; + + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), val); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", __func__, ret); + } else { + ret = -EINVAL; + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + } + +out: + return ret; +} + +int tasdevice_dev_write(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int value) +{ + int ret = 0; + + /* chn <= tas_dev->ndev will support global broadcast mode*/ + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", __func__, ret); + } else { + ret = -EINVAL; + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + } + +out: + return ret; +} + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + /* chn <= tas_dev->ndev will support global broadcast mode*/ + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", __func__, + ret); + } else { + ret = -EINVAL; + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + } + +out: + return ret; +} + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + +out: + return ret; +} + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value) +{ + int ret = 0; + + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_update_bits(tas_dev->regmap, + TASDEVICE_PGRG(reg), mask, value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", __func__, ret); + } else { + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + ret = -EINVAL; + } + +out: + return ret; +} + +/* Only register write and bulk write support global mode + * Other cases, such as bits update, register read and bulk + * only support device-by-device operation + */ +static void tas2781_set_global_mode(struct tasdevice_priv *tas_dev) +{ + int i, ret; + + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + TAS2871_MISC_CFG2, TAS2871_GLOBAL_ADDR_MASK, + TAS2871_GLOBAL_ADDR_ENABLE); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: chn %d set glb fail, %d\n", + __func__, i, ret); + continue; + } + } +} + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret, i; + + tas_dev->cur_prog = -1; + tas_dev->cur_conf = -1; + + for (i = 0; i < tas_dev->ndev; i++) { + tas_dev->tasdevice[i].cur_book = -1; + tas_dev->tasdevice[i].cur_prog = -1; + tas_dev->tasdevice[i].cur_conf = -1; + } + + if (tas_dev->glb_addr.dev_addr != 0 + && tas_dev->glb_addr.dev_addr < 0x7F) + tas_dev->set_global_mode = tas2781_set_global_mode; + dev_set_drvdata(tas_dev->dev, tas_dev); + + mutex_init(&tas_dev->codec_lock); + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:0x%08x\n", + __func__, ret); + goto out; + } + +out: + return ret; +} + +static void tasdevice_remove(struct tasdevice_priv *tas_dev) +{ + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) + gpio_free(tas_dev->irq_info.irq_gpio); + + mutex_destroy(&tas_dev->codec_lock); +} + +static int tasdevice_i2c_probe(struct i2c_client *i2c) +{ + const struct i2c_device_id *id = i2c_match_id(tasdevice_id, i2c); + const struct acpi_device_id *acpi_id; + struct tasdevice_priv *tas_dev; + int ret; + + tas_dev = devm_kzalloc(&i2c->dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) + return -ENOMEM; + + if (ACPI_HANDLE(&i2c->dev)) { + acpi_id = acpi_match_device(i2c->dev.driver->acpi_match_table, + &i2c->dev); + if (!acpi_id) { + dev_err(&i2c->dev, "No driver data\n"); + ret = -EINVAL; + goto out; + } + tas_dev->chip_id = acpi_id->driver_data; + tas_dev->isacpi = true; + } else { + tas_dev->chip_id = id ? id->driver_data : 0; + tas_dev->isacpi = false; + } + + tas_dev->dev = &i2c->dev; + tas_dev->client = (void *)i2c; + + tasdevice_parse_dt(tas_dev); + + tas_dev->regmap = devm_regmap_init_i2c(i2c, + &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) { + ret = PTR_ERR(tas_dev->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + goto out; + } + ret = tasdevice_init(tas_dev); + +out: + if (ret < 0) + tasdevice_remove(tas_dev); + return ret; +} + +static void tasdevice_i2c_remove(struct i2c_client *client) +{ + struct tasdevice_priv *tas_dev = i2c_get_clientdata(client); + + tasdevice_remove(tas_dev); +} + +#ifdef CONFIG_ACPI +static const struct acpi_device_id tasdevice_acpi_match[] = { + { "TAS2781", TAS2781 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, tasdevice_acpi_match); +#endif + +static struct i2c_driver tasdevice_i2c_driver = { + .driver = { + .name = "tas2781-codec", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tasdevice_of_match), + .acpi_match_table = ACPI_PTR(tasdevice_acpi_match), + }, + .probe = tasdevice_i2c_probe, + .remove = tasdevice_i2c_remove, + .id_table = tasdevice_id, +}; + +module_i2c_driver(tasdevice_i2c_driver); + +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_AUTHOR("Kevin Lu <kevin-lu(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2781 Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2781.h b/sound/soc/codecs/tas2781.h new file mode 100644 index 000000000000..815b67b00e02 --- /dev/null +++ b/sound/soc/codecs/tas2781.h @@ -0,0 +1,159 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TAS2781_H__ +#define __TAS2781_H__ + +#include "tas2781-dsp.h" + +#define TAS2781_DRV_VER 1 /* version number */ +#define SMARTAMP_MODULE_NAME "tas2781" +#define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\ + SNDRV_PCM_RATE_88200) +#define TASDEVICE_MAX_CHANNELS 8 + +#define TASDEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/*PAGE Control Register (available in page0 of each book) */ +#define TASDEVICE_PAGE_SELECT 0x00 +#define TASDEVICE_BOOKCTL_PAGE 0x00 +#define TASDEVICE_BOOKCTL_REG 127 +#define TASDEVICE_BOOK_ID(reg) (reg / (256 * 128)) +#define TASDEVICE_PAGE_ID(reg) ((reg % (256 * 128)) / 128) +#define TASDEVICE_PAGE_REG(reg) ((reg % (256 * 128)) % 128) +#define TASDEVICE_PGRG(reg) ((reg % (256 * 128))) +#define TASDEVICE_REG(book, page, reg) (((book * 256 * 128) + \ + (page * 128)) + reg) + +/*Software Reset */ +#define TAS2871_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x02) +#define TAS2871_REG_SWRESET_RESET BIT(0) + +/* Enable Global addresses */ +#define TAS2871_MISC_CFG2 TASDEVICE_REG(0x0, 0X0, 0x07) +#define TAS2871_GLOBAL_ADDR_MASK BIT(1) +#define TAS2871_GLOBAL_ADDR_ENABLE BIT(1) + +/*I2C Checksum */ +#define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) + +/* Volume control */ +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) + +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + +enum audio_device { + TAS2781 = 0, +}; + +#define SMS_HTONS(a, b) ((((a)&0x00FF)<<8) | ((b)&0x00FF)) +#define SMS_HTONL(a, b, c, d) ((((a)&0x000000FF)<<24) | \ + (((b)&0x000000FF)<<16) | (((c)&0x000000FF)<<8) | \ + ((d)&0x000000FF)) + +struct tasdevice { + struct tasdevice_fw *cali_data_fmw; + unsigned int dev_addr; + unsigned int err_code; + unsigned char cur_book; + short cur_prog; + short cur_conf; + bool is_loading; + bool is_loaderr; + bool is_calibrated_data_loaded; +}; + +/* + * This item is used to store the generic i2c address of + * all the tas2781 devices for I2C broadcast during the multi-device + * writes, useless in mono case. + */ +struct global_addr { + unsigned int dev_addr; + unsigned char cur_book; + int ref_cnt; +}; + +struct tasdevice_irqinfo { + int irq_gpio; + int irq; +}; + +struct tasdevice_priv { + struct device *dev; + struct regmap *regmap; + struct mutex codec_lock; + struct gpio_desc *reset; + struct tasdevice tasdevice[max_chn]; + struct tasdevice_fw *fmw; + struct tasdevice_rca rcabin; + struct tasdevice_irqinfo irq_info; + struct global_addr glb_addr; + unsigned int chip_id; + unsigned int magic_num; + unsigned int sysclk; + unsigned char ndev; + unsigned char dev_name[32]; + unsigned char rca_binaryname[64]; + unsigned char coef_binaryname[64]; + unsigned char cal_binaryname[max_chn][64]; + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + void *client; + void *codec; + bool isacpi; + int cur_prog; + int cur_conf; + int fw_state; + void (*set_global_mode)(struct tasdevice_priv *tas_dev); + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_dev, + const struct firmware *fmw, int offset); + int (*fw_parse_program_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*tasdevice_load_block)(struct tasdevice_priv *tas_dev, + struct tasdev_blk *pBlock); +}; + +int tasdevice_dev_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int *value); +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize); +int tasdevice_dev_write(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int value); + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned char *p_data, unsigned int n_length); + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned char *p_data, + unsigned int n_length); + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value); + +#endif /*__TAS2781_H__ */ -- 2.34.1

3 2

Re: [PATCH v3 2/6] mfd: Add support for the Lantiq PEF2256 framer
by kernel test robot 26 Mar '23

26 Mar '23

Hi Herve, Thank you for the patch! Yet something to improve: [auto build test ERROR on lee-mfd/for-mfd-next] [also build test ERROR on broonie-sound/for-next lee-leds/for-leds-next robh/for-next linus/master v6.3-rc3 next-20230324] [cannot apply to lee-mfd/for-mfd-fixes] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Herve-Codina-via-Alsa-devel/… base: https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next patch link: https://lore.kernel.org/r/167949286900.26.3992817728812049195%40mailman-cor… patch subject: [PATCH v3 2/6] mfd: Add support for the Lantiq PEF2256 framer config: m68k-randconfig-c024-20230326 (https://download.01.org/0day-ci/archive/20230327/202303270203.QeRuuc9d-lkp@…) compiler: m68k-linux-gcc (GCC) 12.1.0 reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # https://github.com/intel-lab-lkp/linux/commit/d60948895815b59306d870e7c1897… git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Herve-Codina-via-Alsa-devel/mfd-Add-support-for-the-Lantiq-PEF2256-framer/20230322-215208 git checkout d60948895815b59306d870e7c189741b7d14d5e2 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=m68k olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202303270203.QeRuuc9d-lkp@intel.com/ All errors (new ones prefixed by >>): m68k-linux-ld: drivers/mfd/pef2256.o: in function `pinconf_generic_dt_node_to_map_pin': >> pef2256.c:(.text+0x280): undefined reference to `pinconf_generic_dt_node_to_map' -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests

1 0

[PATCH v3 0/6] Add the Lantiq PEF2256 audio support
by Herve Codina 26 Mar '23

26 Mar '23

Hi, This series adds support for audio using the Lantiq PEF2256 framer. The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. The first part of this series (patches 1 to 4) adds the Lantiq PEF2256 driver core. The second part (patches 5 to 7) adds the audio support using the Lantiq PEF2256 driver core. The consumer/provider relation between the codec and the driver core allows to use the PEF2256 framer for other purpose than audio support. Compared to the previous iteration https://lore.kernel.org/linux-kernel/20230316122741.577663-1-herve.codina@b… This v3 series mainly: - takes into account pef2256.c modifications suggested by Christophe. - fixes binding - Moves to MFD. - Merges MAINTAINERS entries Best regards, Herve Codina Changes v2 -> v3 - Patch 1 Remove unneeded 'allOf' and quotes. Add several 'additionalProperties: false' Fix example (node name, interrupts and reg properties) Replace the lantiq,sysclk-rate-hz property by sclkr and sclkx clocks. Define 'lantiq,frame-format' property in top level. Move to MFD - Patch 2 Fix some #define. Compact the register accessor helpers. Rework pef2256_get_version(). Merge v1.2 and v2.x GCM setup functions into one pef2256_setup_gcm(). Update comments, avoid duplicates and change some conditionals. Remove the carrier spinlock and use atomic_t. Make exported symbol consistent and use EXPORT_SYMBOL_GPL. Remove the no more needed pef2256_get_byphandle() and devm_pef2256_get_byphandle(). Replace the lantiq,sysclk-rate-hz property by sclkr and sclkx clocks. Move to MFD - Patch 4 Remove, merged with patch 7 - Patch 4 (patch 5 in v2) Update title and description. Remove incorrect SPI reference. Remove the 'lantiq,pef2256' phandle. Fix commit log - Patch 5 (patch 6 in v2) Remove devm_pef2256_get_byphandle(). Fix commit log - Patch 6 (patch 7 in v2) Merge v2 patch 4. One entry only for PEF2256 Changes v1 -> v2 - Patch 2 Remove duplicate const qualifiers. Add HAS_IOMEM as a dependency - Patch 3 Fix a "Block quote ends without a blank line; unexpected unindent" syntax issue. Herve Codina (6): dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer mfd: Add support for the Lantiq PEF2256 framer Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry dt-bindings: sound: Add support for the Lantiq PEF2256 codec ASoC: codecs: Add support for the Lantiq PEF2256 codec MAINTAINERS: Add the Lantiq PEF2256 driver entry .../sysfs-bus-platform-devices-pef2256 | 12 + .../bindings/mfd/lantiq,pef2256.yaml | 205 +++ .../bindings/sound/lantiq,pef2256-codec.yaml | 54 + MAINTAINERS | 10 + drivers/mfd/Kconfig | 16 + drivers/mfd/Makefile | 1 + drivers/mfd/pef2256.c | 1355 +++++++++++++++++ include/linux/mfd/pef2256.h | 28 + sound/soc/codecs/Kconfig | 14 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/pef2256-codec.c | 390 +++++ 11 files changed, 2087 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256 create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml create mode 100644 Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml create mode 100644 drivers/mfd/pef2256.c create mode 100644 include/linux/mfd/pef2256.h create mode 100644 sound/soc/codecs/pef2256-codec.c -- 2.39.2

3 15

[PATCH] ASoC: dt-bindings: ak4458: Convert to dtschema
by Saalim Quadri 26 Mar '23

26 Mar '23

Convert the AK4458 audio DAC bindings to DT schema. Signed-off-by: Saalim Quadri <danascape(a)gmail.com> --- .../devicetree/bindings/sound/ak4458.txt | 28 --------- .../bindings/sound/asahi-kasei,ak4458.yaml | 62 +++++++++++++++++++ 2 files changed, 62 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/ak4458.txt create mode 100644 Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml diff --git a/Documentation/devicetree/bindings/sound/ak4458.txt b/Documentation/devicetree/bindings/sound/ak4458.txt deleted file mode 100644 index 0416c14895d6..000000000000 --- a/Documentation/devicetree/bindings/sound/ak4458.txt +++ /dev/null @@ -1,28 +0,0 @@ -AK4458 audio DAC - -This device supports I2C mode. - -Required properties: - -- compatible : "asahi-kasei,ak4458" or "asahi-kasei,ak4497" -- reg : The I2C address of the device for I2C - -Optional properties: -- reset-gpios: A GPIO specifier for the power down & reset pin -- mute-gpios: A GPIO specifier for the soft mute pin -- AVDD-supply: Analog power supply -- DVDD-supply: Digital power supply -- dsd-path: Select DSD input pins for ak4497 - 0: select #16, #17, #19 pins - 1: select #3, #4, #5 pins - -Example: - -&i2c { - ak4458: dac@10 { - compatible = "asahi-kasei,ak4458"; - reg = <0x10>; - reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW> - mute-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH> - }; -}; diff --git a/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml new file mode 100644 index 000000000000..b97aee96fa17 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4458.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AK4458 audio DAC + +maintainers: + - Shengjiu Wang <shengjiu.wang(a)nxp.com> + +properties: + compatible: + enum: + - asahi-kasei,ak4458 + - asahi-kasei,ak4497 + + reg: + maxItems: 1 + + avdd-supply: + description: Analog power supply + + dvdd-supply: + description: Digital power supply + + reset-gpios: + maxItems: 1 + + mute-gpios: + maxItems: 1 + description: + GPIO used to mute all the outputs + + dsd-path: + description: Select DSD input pins for ak4497 + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 0 + description: select #16, #17, #19 pins + - const: 1 + description: select #3, #4, #5 pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + ak4458: codec@10 { + compatible = "asahi-kasei,ak4458"; + reg = <0x10>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + mute-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + }; -- 2.34.1

2 4

[PATCH] ASoC: dt-bindings: alc5632: Convert to dtschema
by Saalim Quadri 26 Mar '23

26 Mar '23

Convert the ALC5632 audio codec bindings to DT schema. Signed-off-by: Saalim Quadri <danascape(a)gmail.com> --- .../devicetree/bindings/sound/alc5632.txt | 43 ------------- .../bindings/sound/realtek,alc5632.yaml | 63 +++++++++++++++++++ 2 files changed, 63 insertions(+), 43 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/alc5632.txt create mode 100644 Documentation/devicetree/bindings/sound/realtek,alc5632.yaml diff --git a/Documentation/devicetree/bindings/sound/alc5632.txt b/Documentation/devicetree/bindings/sound/alc5632.txt deleted file mode 100644 index ffd886d110bd..000000000000 --- a/Documentation/devicetree/bindings/sound/alc5632.txt +++ /dev/null @@ -1,43 +0,0 @@ -ALC5632 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "realtek,alc5632" - - - reg : the I2C address of the device. - - - gpio-controller : Indicates this device is a GPIO controller. - - - #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - -Pins on the device (for linking into audio routes): - - * SPK_OUTP - * SPK_OUTN - * HP_OUT_L - * HP_OUT_R - * AUX_OUT_P - * AUX_OUT_N - * LINE_IN_L - * LINE_IN_R - * PHONE_P - * PHONE_N - * MIC1_P - * MIC1_N - * MIC2_P - * MIC2_N - * MICBIAS1 - * DMICDAT - -Example: - -alc5632: alc5632@1e { - compatible = "realtek,alc5632"; - reg = <0x1a>; - - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/sound/realtek,alc5632.yaml b/Documentation/devicetree/bindings/sound/realtek,alc5632.yaml new file mode 100644 index 000000000000..7c2de067fb27 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,alc5632.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,alc5632.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ALC5632 audio CODEC + +description: | + Pins on the device (for linking into audio routes): + * SPK_OUTP + * SPK_OUTN + * HP_OUT_L + * HP_OUT_R + * AUX_OUT_P + * AUX_OUT_N + * LINE_IN_L + * LINE_IN_R + * PHONE_P + * PHONE_N + * MIC1_P + * MIC1_N + * MIC2_P + * MIC2_N + * MICBIAS1 + * DMICDAT + +maintainers: + - Liam Girdwood <lgirdwood(a)gmail.com> + +properties: + compatible: + const: realtek,alc5632 + + reg: + maxItems: 1 + + '#gpio-cells': + const: 2 + + gpio-controller: true + +required: + - compatible + - reg + - '#gpio-cells' + - gpio-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + alc5632: alc5632@1a { + compatible = "realtek,alc5632"; + reg = <0x1a>; + gpio-controller; + #gpio-cells = <2>; + }; + }; -- 2.34.1

2 3

100% volume level on sc8280xp is too quiet
by GitHub issues - opened 26 Mar '23

26 Mar '23

alsa-project/alsa-ucm-conf issue #296 was opened from shvetsnikita: Hello! I tested merged UCM configuration on Lenovo X13s (with t[his kernel](https://github.com/steev/linux/tree/lenovo-x13s-v6.3-rc3)) and found that even at 100% volume level is too low. Increase volume level 100% doesn't help (as if something is missing) - audio become more distorted but much louder. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/296 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v3 0/1] Expose ALSA control for jack
by Dylan Van Assche 25 Mar '23

25 Mar '23

Qualcomm SDM845 features a headphone jack via a Qualcomm WCD9340 codec which has jack detection through the wcd-mbhc-v2 driver. ALSA features 2 ways to expose jack detection from the kernel to userspace either as an input device or through an ALSA control. The wcd-mbhc-v2 driver only supports the first option which is insufficient for userspace programs e.g. PulseAudio [1]. Therefore, ALSA clients such as PulseAudio do not pick up the jack detection events as they only support one of the possible interface (ALSA control or input interface, but not both). Expose the jack events as an ALSA control and input interface to provide ALSA clients both interfaces. [1] https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1377 Changes in v3: - Improved cover letter - Added Tested-by from https://lore.kernel.org/alsa-devel/20221007155716.10594-1-me@dylanvanassche… - Properly added maintainers for sending this patch Kind regards, Dylan Van Assche Dylan Van Assche (1): sound: soc: codecs: wcd-mbhc-v2: expose ALSA control for jack sound/soc/codecs/wcd-mbhc-v2.c | 4 ++++ 1 file changed, 4 insertions(+) -- 2.39.2

2 3

Re: [PATCH] ASoC: dt-bindings: alc5632: Convert to dtschema
by Krzysztof Kozlowski 25 Mar '23

25 Mar '23

On 23/03/2023 18:11, Saalim Quadri wrote: > Hello, > > This is my first time using the Linux Kernel Mailing List. I apologise if I commit any mistakes. > >> This should not be subsystem maintainer but someone related to the >> device. It's maintainer or interested contributor. Unless that's the >> case here? > > yes it is wrong, he is not the subsystem maintainer. I will send the updated patch. > > I have a doubt, for the maintainers list, is it required to include all the names of the subsystem maintainer > in the yaml too? As for this codec, there are 4, shall I include the names of all of them or the one to whom the > module is authored to? Depends, choose one or two names, maybe the most active. Best regards, Krzysztof

3 7

[PATCH v6] ASoC: tas2781: Add tas2781 driver
by Shenghao Ding 25 Mar '23

25 Mar '23

Create tas2781 driver. Signed-off-by: Shenghao Ding <13916275206(a)139.com> --- Changes in v6: - use usleep_range as sleep functions. - correct the typo - -EINVAL instead of -1 - fix very odd indentation in fw_parse_data_kernel | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202303220800.Pz99eL6X-lkp@intel.com/ - tasdevice_i2c_probe: variable 'ret' is used uninitialized whenever 'if' condition is false - remove odd mutex lock/unlock - introduce the reverse xmas tree style for declaration list Changes to be committed: modified: sound/soc/codecs/Kconfig modified: sound/soc/codecs/Makefile new file: sound/soc/codecs/tas2781-dsp.c new file: sound/soc/codecs/tas2781-dsp.h new file: sound/soc/codecs/tas2781-i2c.c new file: sound/soc/codecs/tas2781.h --- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2781-dsp.c | 2242 ++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2781-dsp.h | 180 +++ sound/soc/codecs/tas2781-i2c.c | 1621 +++++++++++++++++++++++ sound/soc/codecs/tas2781.h | 160 +++ 6 files changed, 4217 insertions(+) create mode 100644 sound/soc/codecs/tas2781-dsp.c create mode 100644 sound/soc/codecs/tas2781-dsp.h create mode 100644 sound/soc/codecs/tas2781-i2c.c create mode 100644 sound/soc/codecs/tas2781.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 07747565c3b5..e1afe1ced5d7 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -229,6 +229,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2764 imply SND_SOC_TAS2770 imply SND_SOC_TAS2780 + imply SND_SOC_TAS2781 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1637,6 +1638,17 @@ config SND_SOC_TAS2780 Enable support for Texas Instruments TAS2780 high-efficiency digital input mono Class-D audio power amplifiers. +config SND_SOC_TAS2781 + tristate "Texas Instruments TAS2781 speaker amplifier" + depends on I2C + select REGMAP_I2C + select CRC8 + help + Enable support for Texas Instruments TAS2781 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + Note the TAS2781 driver implements a flexible and configurable + algo coff setting, for one, two, even multiple TAS2781 chips. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f1ca18f7946c..5559b9e9cc17 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -262,6 +262,7 @@ snd-soc-tas5805m-objs := tas5805m.o snd-soc-tas6424-objs := tas6424.o snd-soc-tda7419-objs := tda7419.o snd-soc-tas2770-objs := tas2770.o +snd-soc-tas2781-objs := tas2781-i2c.o tas2781-dsp.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -619,6 +620,7 @@ obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o +obj-$(CONFIG_SND_SOC_TAS2781) += snd-soc-tas2781.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2781-dsp.c b/sound/soc/codecs/tas2781-dsp.c new file mode 100644 index 000000000000..a0f5e958d7fe --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.c @@ -0,0 +1,2242 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/fs.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/string.h> + +#include "tas2781.h" + +#define ERROR_PRAM_CRCCHK 0x0000000 +#define ERROR_YRAM_CRCCHK 0x0000001 +#define PPC_DRIVER_CRCCHK 0x00000200 + +#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) +#define TAS2781_YRAM_BOOK1 140 +#define TAS2781_YRAM1_PAGE 42 +#define TAS2781_YRAM1_START_REG 88 + +#define TAS2781_YRAM2_START_PAGE 43 +#define TAS2781_YRAM2_END_PAGE 49 +#define TAS2781_YRAM2_START_REG 8 +#define TAS2781_YRAM2_END_REG 127 + +#define TAS2781_YRAM3_PAGE 50 +#define TAS2781_YRAM3_START_REG 8 +#define TAS2781_YRAM3_END_REG 27 + +/*should not include B0_P53_R44-R47 */ +#define TAS2781_YRAM_BOOK2 0 +#define TAS2781_YRAM4_START_PAGE 50 +#define TAS2781_YRAM4_END_PAGE 60 + +#define TAS2781_YRAM5_PAGE 61 +#define TAS2781_YRAM5_START_REG 8 +#define TAS2781_YRAM5_END_REG 27 + +#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 +#define MAIN_ALL_DEVICES_1X 0x01 +#define MAIN_DEVICE_A_1X 0x02 +#define MAIN_DEVICE_B_1X 0x03 +#define MAIN_DEVICE_C_1X 0x04 +#define MAIN_DEVICE_D_1X 0x05 +#define COEFF_DEVICE_A_1X 0x12 +#define COEFF_DEVICE_B_1X 0x13 +#define COEFF_DEVICE_C_1X 0x14 +#define COEFF_DEVICE_D_1X 0x15 +#define PRE_DEVICE_A_1X 0x22 +#define PRE_DEVICE_B_1X 0x23 +#define PRE_DEVICE_C_1X 0x24 +#define PRE_DEVICE_D_1X 0x25 + +struct tas_crc { + unsigned char offset; + unsigned char len; +}; + +const char deviceNumber[TASDEVICE_DSP_TAS_MAX_DEVICE] = { + 1, 2, 1, 2, 1, 1, 0, 2, 4, 3, 1, 2, 3, 4 +}; + +static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + block->type = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], + data[offset + 3]); + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: PChkSumPresent error\n", __func__); + offset = -EINVAL; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnPChkSum error\n", __func__); + offset = -EINVAL; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: YChkSumPresent error\n", __func__); + offset = -EINVAL; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnYChkSum error\n", __func__); + offset = -EINVAL; + goto out; + } + block->ychksum = data[offset]; + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: blk_size error\n", __func__); + offset = -EINVAL; + goto out; + } + block->blk_size = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); + offset = -EINVAL; + goto out; + } + block->nr_subblocks = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + block->data = kzalloc(block->blk_size, GFP_KERNEL); + if (!block->data) { + offset = -EINVAL; + goto out; + } + memcpy(block->data, &data[offset], block->blk_size); + offset += block->blk_size; +out: + return offset; +} + +static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = fmw->data; + struct tasdev_blk *blk; + unsigned int nr_block; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + img_data->nr_blk = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], data[offset + 3]); + offset += 4; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (!img_data->dev_blks) { + offset = -ENOMEM; + goto out; + } + + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + blk = &(img_data->dev_blks[nr_block]); + offset = fw_parse_block_data_kernel(tas_fmw, blk, fmw, offset); + if (offset < 0) { + offset = -EINVAL; + break; + } + } +out: + return offset; +} + +static int fw_parse_program_data_kernel( + struct tasdevice_priv *tas_dev, struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned int nr_program; + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: AppMode error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "PDMI2SMode err\n"); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: ISnsPD error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: VSnsPD error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + //skip 3-byte reserved + offset += 3; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: PowerLDG err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + offset = fw_parse_data_kernel(tas_fmw, &(program->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_configuration_data_kernel( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + struct tasdevice_config *config; + unsigned int nr_conf; + + for (nr_conf = 0; nr_conf < tas_fmw->nr_configurations; nr_conf++) { + config = &(tas_fmw->configs[nr_conf]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -EINVAL; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "orientation err\n"); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Devices error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 1; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: Program error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "SamplingRate err\n"); + offset = -EINVAL; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLSrc error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: FsRate error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLRate err\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + offset = fw_parse_data_kernel(tas_fmw, + &(config->dev_data), fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_variable_header_kernel( + struct tasdevice_priv *tas_dev, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_prog *program; + struct tasdevice_config *config; + const unsigned char *buf = fmw->data; + unsigned int nr_program, nr_configs; + unsigned short max_confs; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device_family = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "%s:not TAS device\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: Device error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "Unsupported dev %d\n", fw_hdr->device); + offset = -EINVAL; + goto out; + } + offset += 2; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin mismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, tas_dev->ndev); + offset = -EINVAL; + goto out; + } + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPrograms error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_programs = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + if (tas_fmw->nr_programs == 0 || tas_fmw->nr_programs > + TASDEVICE_MAXPROGRAM_NUM_KERNEL) { + dev_err(tas_dev->dev, "%s: mnPrograms is invalid\n", __func__); + offset = -EINVAL; + goto out; + } + + if (offset + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { + dev_err(tas_dev->dev, "%s: mpPrograms error\n", __func__); + offset = -EINVAL; + goto out; + } + + tas_fmw->programs = kcalloc(tas_fmw->nr_programs, + sizeof(struct tasdevice_prog), GFP_KERNEL); + if (!tas_fmw->programs) { + offset = -ENOMEM; + goto out; + } + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + program->prog_size = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + } + + /* Skip the unused prog_size + * nr_program == tas_fmw->nr_programs, nr_program is shorter than + * tas_fmw->nr_programs, avoid more than 80 chars + */ + offset += (4 * (TASDEVICE_MAXPROGRAM_NUM_KERNEL - nr_program)); + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: Configurations error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + /* The max of conf for more than equal to 4 pcs of devices is different + * from the one less than 4 pcs of tas2781s. + */ + max_confs = (fw_hdr->ndev >= 4) ? + TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS : + TASDEVICE_MAXCONFIG_NUM_KERNEL; + if (tas_fmw->nr_configurations == 0 || + tas_fmw->nr_configurations > max_confs) { + dev_err(tas_dev->dev, "%s: Conf is invalid\n", __func__); + offset = -EINVAL; + goto out; + } + + if (offset + 4 * max_confs > fmw->size) { + dev_err(tas_dev->dev, "%s: mpConfigurations err\n", __func__); + offset = -EINVAL; + goto out; + } + + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + if (!tas_fmw->configs) { + offset = -ENOMEM; + goto out; + } + + for (nr_configs = 0; nr_configs < tas_fmw->nr_programs; + nr_configs++) { + config = + &(tas_fmw->configs[nr_configs]); + config->cfg_size = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + } + + /* Skip the unused configs */ + offset += 4 * (max_confs - nr_configs); +out: + return offset; +} + +static int tasdevice_load_block_kernel( + struct tasdevice_priv *tasdevice, struct tasdev_blk *block) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tasdevice->fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + const unsigned int blk_size = block->blk_size; + unsigned int i, length; + unsigned char *data = block->data; + unsigned char dev_idx = 0; + + if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + switch (block->type) { + case MAIN_ALL_DEVICES_1X: + dev_idx = 0x80; + break; + case MAIN_DEVICE_A_1X: + dev_idx = 0x81; + break; + case COEFF_DEVICE_A_1X: + case PRE_DEVICE_A_1X: + dev_idx = 0xC1; + break; + case MAIN_DEVICE_B_1X: + dev_idx = 0x82; + break; + case COEFF_DEVICE_B_1X: + case PRE_DEVICE_B_1X: + dev_idx = 0xC2; + break; + case MAIN_DEVICE_C_1X: + dev_idx = 0x83; + break; + case COEFF_DEVICE_C_1X: + case PRE_DEVICE_C_1X: + dev_idx = 0xC3; + break; + case MAIN_DEVICE_D_1X: + dev_idx = 0x84; + break; + case COEFF_DEVICE_D_1X: + case PRE_DEVICE_D_1X: + dev_idx = 0xC4; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } else { + switch (block->type) { + case MAIN_ALL_DEVICES: + dev_idx = 0|0x80; + break; + case MAIN_DEVICE_A: + dev_idx = 0x81; + break; + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + dev_idx = 0xC1; + break; + case MAIN_DEVICE_B: + dev_idx = 0x82; + break; + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + dev_idx = 0xC2; + break; + case MAIN_DEVICE_C: + dev_idx = 0x83; + break; + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + dev_idx = 0xC3; + break; + case MAIN_DEVICE_D: + dev_idx = 0x84; + break; + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + dev_idx = 0xC4; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } + + for (i = 0, length = 0; i < block->nr_subblocks; i++) { + int rc = tasdevice_process_block(tasdevice, data + length, + dev_idx, blk_size - length); + if (rc < 0) { + dev_err(tasdevice->dev, + "%s: %u %u sublock write error\n", + __func__, length, blk_size); + break; + } + length += (unsigned int)rc; + if (blk_size < length) { + dev_err(tasdevice->dev, + "%s: %u %u out of boundary\n", + __func__, length, blk_size); + break; + } + } + + return 0; +} + +static int fw_parse_variable_header_git(struct tasdevice_priv + *tas_dev, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + const unsigned char *buf = fmw->data; + int len = strlen((char *)&buf[offset]); + + len++; + + if (offset + len > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + + offset += len; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "%s: not TAS device\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "Unsupported dev %d\n", fw_hdr->device); + offset = -EINVAL; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin mismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, + tas_dev->ndev); + offset = -EINVAL; + } + +out: + return offset; +} + +static int fw_parse_variable_hdr_cal(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + const unsigned char *buf = fmw->data; + int len = strlen((char *)&buf[offset]); + + len++; + + if (offset + len > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + + offset += len; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: DeviceFamily error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "%s: not TAS device\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: Device error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "Unsupported dev %d\n", fw_hdr->device); + offset = -EINVAL; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != 1) { + dev_err(tas_dev->dev, + "%s: calbin must be 1, but currently ndev(%u)\n", + __func__, fw_hdr->ndev); + offset = -EINVAL; + } + +out: + return offset; +} + +static inline void tas2781_clear_calfirmware(struct tasdevice_fw + *tas_fmw) +{ + unsigned int blks; + int i; + + if (tas_fmw->calibrations) { + struct tasdevice_calibration *calibration; + + for (i = 0; i < tas_fmw->nr_calibrations; i++) { + calibration = &(tas_fmw->calibrations[i]); + if (calibration) { + struct tasdevice_data *im = + &(calibration->dev_data); + + if (im->dev_blks) { + struct tasdev_blk *block; + + for (blks = 0; blks < im->nr_blk; + blks++) { + block = &(im->dev_blks[blks]); + kfree(block->data); + } + kfree(im->dev_blks); + } + } + } + kfree(tas_fmw->calibrations); + } + kfree(tas_fmw); +} + +static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Type error\n", __func__); + offset = -EINVAL; + goto out; + } + block->type = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= + PPC_DRIVER_CRCCHK) { + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "PChkSumPresent error\n"); + offset = -EINVAL; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: PChkSum error\n", __func__); + offset = -EINVAL; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "YChkSumPresent error\n"); + offset = -EINVAL; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: YChkSum error\n", __func__); + offset = -EINVAL; + goto out; + } + block->ychksum = data[offset]; + offset++; + } else { + block->is_pchksum_present = 0; + block->is_ychksum_present = 0; + } + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Commands error\n", __func__); + offset = -EINVAL; + goto out; + } + block->nr_cmds = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + n = block->nr_cmds * 4; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, + "%s: File Size(%lu) error offset = %d n = %d\n", + __func__, (unsigned long)fmw->size, offset, n); + offset = -EINVAL; + goto out; + } + block->data = kmemdup(&data[offset], n, GFP_KERNEL); + if (!block->data) { + offset = -ENOMEM; + goto out; + } + offset += n; +out: + return offset; +} + +static int fw_parse_data(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = (unsigned char *)fmw->data; + struct tasdev_blk *blk; + unsigned int nr_block; + int n; + + if (offset + 64 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Name error\n", __func__); + offset = -EINVAL; + goto out; + } + memcpy(img_data->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, "%s: Description error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += n; + + if (offset + 2 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Blocks error\n", __func__); + offset = -EINVAL; + goto out; + } + img_data->nr_blk = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (!img_data->dev_blks) { + offset = -ENOMEM; + goto out; + } + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + blk = &(img_data->dev_blks[nr_block]); + offset = fw_parse_block_data(tas_fmw, blk, fmw, offset); + if (offset < 0) { + offset = -EINVAL; + goto out; + } + } +out: + return offset; +} + +static int fw_parse_calibration_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_calibration *calibration; + unsigned char *data = (unsigned char *)fmw->data; + unsigned int nr_calibration = 0; + unsigned int n; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: Calibrations error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_calibrations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_calibrations != 1) { + dev_err(tas_dev->dev, + "%s: only support one calibraiton(%d)!\n", + __func__, tas_fmw->nr_calibrations); + goto out; + } + + tas_fmw->calibrations = + kcalloc(tas_fmw->nr_calibrations, + sizeof(struct tasdevice_calibration), GFP_KERNEL); + if (!tas_fmw->calibrations) { + offset = -ENOMEM; + goto out; + } + for (nr_calibration = 0; nr_calibration < tas_fmw->nr_calibrations; + nr_calibration++) { + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "Calibrations error\n"); + offset = -EINVAL; + goto out; + } + calibration = &(tas_fmw->calibrations[nr_calibration]); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "Description err\n"); + offset = -EINVAL; + goto out; + } + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Prog err, offset = %d\n", + __func__, offset); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Conf err, offset = %d\n", + __func__, offset); + offset = -EINVAL; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(calibration->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } + +out: + + return offset; +} + +static int fw_parse_program_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *buf = (unsigned char *)fmw->data; + struct tasdevice_prog *program; + int nr_program; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_programs = SMS_HTONS(buf[offset], buf[offset + 1]); + offset += 2; + + if (tas_fmw->nr_programs == 0) { + /*Not error in calibration Data file, return directly*/ + dev_info(tas_dev->dev, "%s: No Programs data, maybe calbin\n", + __func__); + goto out; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, sizeof(struct tasdevice_prog), + GFP_KERNEL); + if (!tas_fmw->programs) { + offset = -ENOMEM; + goto out; + } + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + int n = 0; + + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 64; + + n = strlen((char *)&buf[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "Description err\n"); + offset = -EINVAL; + goto out; + } + + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: AppMode err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "PDMI2SMode err\n"); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: ISnsPD error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: VSnsPD error\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: PowerLDG err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(program->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_configuration_data( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + struct tasdevice_config *config; + unsigned int n_configs; + int n; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_configurations == 0) { + dev_err(tas_dev->dev, "%s: Conf is zero\n", __func__); + /*Not error for calibration Data file, return directly*/ + goto out; + } + tas_fmw->configs = + kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + if (!tas_fmw->configs) { + offset = -ENOMEM; + goto out; + } + for (n_configs = 0; n_configs < tas_fmw->nr_configurations; + n_configs++) { + config = + &(tas_fmw->configs[n_configs]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size err\n", __func__); + offset = -EINVAL; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "Description err\n"); + offset = -EINVAL; + goto out; + } + + offset += n; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "Device_orientation err\n"); + offset = -EINVAL; + goto out; + } + offset += 2; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Program err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "SampleRate err\n"); + offset = -EINVAL; + goto out; + } + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLSrc err\n", __func__); + offset = -EINVAL; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLRate err\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFsRate err\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 2; + + offset = fw_parse_data(tas_fmw, &(config->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_header(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + const unsigned char magic_number[] = { 0x35, 0x35, 0x35, 0x32 }; + const unsigned char *buf = (unsigned char *)fmw->data; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + if (memcmp(&buf[offset], magic_number, 4)) { + dev_err(tas_dev->dev, "%s: Magic num NOT match\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWSize error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_fixed_hdr->fwsize = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + if (fw_fixed_hdr->fwsize != fmw->size) { + dev_err(tas_dev->dev, "File size not match, %lu %u", + (unsigned long)fmw->size, fw_fixed_hdr->fwsize); + offset = -EINVAL; + goto out; + } + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnChecksum error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPPCVersion error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_fixed_hdr->ppcver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWVersion error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDriverVersion error\n", __func__); + offset = -EINVAL; + goto out; + } + fw_fixed_hdr->drv_ver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnTimeStamp error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDDCName error\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 64; + + out: + return offset; +} + +/* Return Code: + * true -- the registers are in the inpage yram + * false -- the registers are NOT in the inpage yram + */ +static bool check_inpage_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1) { + if (page == TAS2781_YRAM1_PAGE) { + if (reg >= TAS2781_YRAM1_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg + len > TAS2781_YRAM1_START_REG) { + cd->offset = TAS2781_YRAM1_START_REG; + cd->len = + len - (TAS2781_YRAM1_START_REG - reg); + in = true; + } + } else if (page == TAS2781_YRAM3_PAGE) { + if (reg <= TAS2781_YRAM3_END_REG && + reg >= TAS2781_YRAM3_START_REG) { + if ((reg + len) > TAS2781_YRAM3_END_REG) + cd->len = + TAS2781_YRAM3_END_REG - reg + 1; + else + cd->len = len; + in = true; + cd->offset = reg; + } else if (reg < TAS2781_YRAM3_START_REG) { + if (reg + len - 1 >= TAS2781_YRAM3_START_REG) { + cd->offset = TAS2781_YRAM3_START_REG; + cd->len = + len - (TAS2781_YRAM3_START_REG - reg); + in = true; + } + } + } + } else if (book == + TAS2781_YRAM_BOOK2) { + if (page == TAS2781_YRAM5_PAGE) { + if (reg <= TAS2781_YRAM5_END_REG && + reg >= TAS2781_YRAM5_START_REG) { + if (reg + len > TAS2781_YRAM5_END_REG) + cd->len = + TAS2781_YRAM5_END_REG - reg + 1; + else + cd->len = len; + cd->offset = reg; + in = true; + } else if (reg < TAS2781_YRAM5_START_REG) { + if (reg + len - 1 >= TAS2781_YRAM5_START_REG) { + cd->offset = TAS2781_YRAM5_START_REG; + cd->len = + len - (TAS2781_YRAM5_START_REG - reg); + in = true; + } + } + } + } + + return in; +} + + +/* Return Code: + * true -- the registers are in the inblock yram + * false -- the registers are NOT in the inblock yram + */ +static bool check_inblock_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1) { + if (page >= TAS2781_YRAM2_START_PAGE && + page <= TAS2781_YRAM2_END_PAGE) { + if (reg <= TAS2781_YRAM2_END_REG && + reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg < TAS2781_YRAM2_START_REG) { + if (reg + len - 1 >= + TAS2781_YRAM2_START_REG) { + cd->offset = + TAS2781_YRAM2_START_REG; + cd->len = + reg + len - TAS2781_YRAM2_START_REG; + in = true; + } + } + } + } else if (book == + TAS2781_YRAM_BOOK2) { + if (page >= TAS2781_YRAM4_START_PAGE && + page <= TAS2781_YRAM4_END_PAGE) { + if (reg <= TAS2781_YRAM2_END_REG && + reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg < TAS2781_YRAM2_START_REG) { + if (reg + len - 1 >= + TAS2781_YRAM2_START_REG) { + cd->offset = + TAS2781_YRAM2_START_REG; + cd->len = + reg + len - TAS2781_YRAM2_START_REG; + in = true; + } + } + } + } + + return in; +} + +static bool check_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in; + + in = check_inpage_yram(cd, book, page, reg, len); + if (in == false) + in = check_inblock_yram(cd, book, + page, reg, len); + + return in; +} + +static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, + enum channel chl, unsigned char book, unsigned char page, + unsigned char reg, unsigned char val) +{ + struct tas_crc crc_data; + unsigned int nData1; + int ret; + bool in; + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg >= TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (reg <= (TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG) + 4))) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + in = check_yram(&crc_data, book, page, reg, 1); + if (in) { + ret = tasdevice_dev_read(tasdevice, chl, + TASDEVICE_REG(book, page, reg), &nData1); + if (ret < 0) + goto end; + + if (nData1 != val) { + dev_err(tasdevice->dev, + "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", + book, page, reg, + val, nData1); + tasdevice->tasdevice[chl].err_code |= + ERROR_YRAM_CRCCHK; + ret = -EAGAIN; + goto end; + } + + ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); + } + +end: + return ret; +} + +static int do_multireg_checksum(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned char book, unsigned char page, + unsigned char reg, unsigned int len) +{ + struct tas_crc crc_data; + unsigned char crc_chksum = 0; + unsigned char nBuf1[128]; + int ret, i; + bool in; + + if ((reg + len - 1) > 127) { + ret = -EINVAL; + dev_err(tasdevice->dev, "firmware error\n"); + goto end; + } + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg == TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (len == 4)) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + in = check_yram(&crc_data, book, page, reg, len); + if (in) { + if (len == 1) { + dev_err(tasdevice->dev, "firmware error\n"); + ret = -EINVAL; + goto end; + } else { + ret = tasdevice_dev_bulk_read(tasdevice, chn, + TASDEVICE_REG(book, page, crc_data.offset), + nBuf1, crc_data.len); + if (ret < 0) + goto end; + + for (i = 0; i < crc_data.len; i++) { + if ((book == TASDEVICE_BOOK_ID( + TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID( + TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + >= TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + <= (TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG) + + 4))) { + /*DSP swap command, bypass */ + continue; + } else + crc_chksum += + crc8(tasdevice->crc8_lkp_tbl, + &nBuf1[i], 1, 0); + } + + ret = crc_chksum; + } + } + +end: + return ret; +} + +static int tasdev_byte_chksum(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn, unsigned char book, + unsigned char page, unsigned char reg, unsigned char val, + unsigned char *crc_chksum) +{ + int ret = do_singlereg_checksum(tas_dev, chn, book, page, reg, val); + + if (ret > 0) { + *crc_chksum += (unsigned char)ret; + goto end; + } + + if (ret == -EAGAIN) { + block->nr_retry--; + if (block->nr_retry <= 0) { + if ((block->type == MAIN_ALL_DEVICES) + || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + } + } +end: + return ret; +} + +static int tasdev_multibyte_chksum(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn, unsigned char book, + unsigned char page, unsigned char reg, unsigned int len, + unsigned char *crc_chksum) +{ + int ret = do_multireg_checksum(tas_dev, chn, book, page, reg, len); + + if (ret > 0) { + *crc_chksum += (unsigned char)ret; + goto end; + } + + if (ret == -EAGAIN) { + block->nr_retry--; + if (block->nr_retry <= 0) { + if ((block->type == MAIN_ALL_DEVICES) + || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + } + } +end: + return ret; +} + +static int tasdev_multibytes_wr(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn, unsigned char book, + unsigned char page, unsigned char reg, unsigned char *data, + unsigned int len, unsigned int *nr_cmds, + unsigned char *crc_chksum) +{ + int ret; + + if (len > 1) { + ret = tasdevice_dev_bulk_write(tas_dev, chn, + TASDEVICE_REG(book, page, reg), data + 3, len); + if (ret < 0) + goto end; + if (block->is_ychksum_present) + ret = tasdev_multibyte_chksum(tas_dev, block, chn, + book, page, reg, len, crc_chksum); + + } else { + ret = tasdevice_dev_write(tas_dev, + chn, + TASDEVICE_REG(book, page, + reg), + data[3]); + if (ret < 0) + goto end; + if (block->is_ychksum_present) + ret = tasdev_byte_chksum(tas_dev, block, chn, book, + page, reg, data[3], crc_chksum); + } + + if (!block->is_ychksum_present || ret >= 0) { + *nr_cmds += 1; + if (len >= 2) + *nr_cmds += ((len - 2) / 4) + 1; + } + +end: + return ret; +} + +static int tasdev_block_chksum(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn) +{ + unsigned int nr_value; + int ret; + + ret = tasdevice_dev_read(tas_dev, chn, TASDEVICE_I2CChecksum, + &nr_value); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: Chn %d\n", __func__, chn); + if ((block->type == MAIN_ALL_DEVICES) + || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + goto end; + } + + if ((nr_value & 0xff) != block->pchksum) { + dev_err(tas_dev->dev, "%s: Blk PChkSum Chn %d ", __func__, + chn); + dev_err(tas_dev->dev, "PChkSum = 0x%x, Reg = 0x%x\n", + block->pchksum, (nr_value & 0xff)); + tas_dev->tasdevice[chn].err_code |= ERROR_PRAM_CRCCHK; + ret = -EAGAIN; + block->nr_retry--; + + if (block->nr_retry <= 0) { + if ((block->type == MAIN_ALL_DEVICES) + || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + } + } else + tas_dev->tasdevice[chn].err_code &= ~ERROR_PRAM_CRCCHK; +end: + return ret; +} + +static int tasdev_load_blk(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block, int chn) +{ + unsigned int sleep_time; + unsigned int len; + unsigned int nr_cmds; + unsigned char *data = block->data; + unsigned char crc_chksum = 0; + unsigned char offset; + unsigned char book; + unsigned char page; + unsigned char val; + int ret = 0; + + while (block->nr_retry > 0) { + if (block->is_pchksum_present) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_I2CChecksum, 0); + if (ret < 0) + break; + } + + if (block->is_ychksum_present) + crc_chksum = 0; + + nr_cmds = 0; + + while (nr_cmds < block->nr_cmds) { + data = block->data + nr_cmds * 4; + + book = data[0]; + page = data[1]; + offset = data[2]; + val = data[3]; + + nr_cmds++; + /*Single byte write*/ + if (offset <= 0x7F) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(book, page, offset), + val); + if (ret < 0) + goto end; + if (block->is_ychksum_present) { + ret = tasdev_byte_chksum(tas_dev, + block, chn, book, page, offset, + val, &crc_chksum); + if (ret < 0) + break; + } + continue; + } + /*sleep command*/ + if (offset == 0x81) { + /*book -- data[0] page -- data[1]*/ + sleep_time = ((book << 8) + page)*1000; + usleep_range(sleep_time, sleep_time + 50); + continue; + } + /*Multiple bytes write*/ + if (offset == 0x85) { + data += 4; + len = (book << 8) + page; + book = data[0]; + page = data[1]; + offset = data[2]; + ret = tasdev_multibytes_wr(tas_dev, block, chn, + book, page, offset, data, len, + &nr_cmds, &crc_chksum); + if (ret < 0) + break; + } + } + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) /*err in current device, skip it*/ + break; + + if (block->is_pchksum_present) { + ret = tasdev_block_chksum(tas_dev, block, chn); + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) /*err in current device, skip it*/ + break; + } + + if (block->is_ychksum_present) { + /* TBD, open it when FW ready */ + dev_err(tas_dev->dev, + "Blk YChkSum: FW = 0x%x, YCRC = 0x%x\n", + block->ychksum, crc_chksum); + + tas_dev->tasdevice[chn].err_code &= + ~ERROR_YRAM_CRCCHK; + ret = 0; + } + /*skip current blk*/ + break; + } +end: + return ret; +} + +static int tasdevice_load_block(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block) +{ + int chnend = 0; + int ret = 0; + int chn = 0; + int rc = 0; + + switch (block->type) { + case MAIN_ALL_DEVICES: + chn = 0; + chnend = tas_dev->ndev; + break; + case MAIN_DEVICE_A: + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + chn = 0; + chnend = 1; + break; + case MAIN_DEVICE_B: + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + chn = 1; + chnend = 2; + break; + case MAIN_DEVICE_C: + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + chn = 2; + chnend = 3; + break; + case MAIN_DEVICE_D: + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + chn = 3; + chnend = 4; + break; + default: + dev_dbg(tas_dev->dev, "load blk: Other Type = 0x%02x\n", + block->type); + break; + } + + for (; chn < chnend; chn++) { + block->nr_retry = 6; + if (tas_dev->tasdevice[chn].is_loading == false) + continue; + ret = tasdev_load_blk(tas_dev, block, chn); + if (ret < 0) + dev_err(tas_dev->dev, "dev %d, Blk (%d) load error\n", + chn, block->type); + rc |= ret; + } + + return rc; +} + +static int tasdevice_load_data(struct tasdevice_priv *tas_dev, + struct tasdevice_data *dev_data) +{ + struct tasdev_blk *block; + unsigned int nr_block; + int ret = 0; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tas_dev->tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +static int tasdevice_load_calibrated_data( + struct tasdevice_priv *tas_dev, struct tasdevice_data *dev_data) +{ + struct tasdev_blk *block; + unsigned int nr_block; + int ret = 0; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +int tas2781_load_calibration(void *context, + char *file_name, enum channel i) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + struct tasdevice *tasdev = &(tas_dev->tasdevice[i]); + const struct firmware *fw_entry; + struct tasdevice_fw *tas_fmw; + struct firmware fmw; + int ret, offset = 0; + + ret = request_firmware(&fw_entry, file_name, tas_dev->dev); + if (!ret) { + if (!fw_entry->size) { + dev_err(tas_dev->dev, + "%s: file read error: size = %lu\n", + __func__, (unsigned long)fw_entry->size); + goto out; + } + fmw.size = fw_entry->size; + fmw.data = fw_entry->data; + } else { + dev_info(tas_dev->dev, + "%s: Request firmware %s failed\n", + __func__, file_name); + goto out; + } + + tas_fmw = tasdev->cali_data_fmw = kcalloc(1, + sizeof(struct tasdevice_fw), GFP_KERNEL); + if (!tasdev->cali_data_fmw) { + dev_err(tas_dev->dev, "%s: FW memory failed!\n", __func__); + ret = -ENOMEM; + goto out; + } + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, &fmw, offset); + if (offset == -EINVAL) { + dev_err(tas_dev->dev, "%s: fw_parse_header EXIT!\n", __func__); + ret = offset; + goto out; + } + offset = fw_parse_variable_hdr_cal(tas_dev, tas_fmw, &fmw, offset); + if (offset == -EINVAL) { + dev_err(tas_dev->dev, + "%s: fw_parse_variable_header_cal EXIT!\n", __func__); + ret = offset; + goto out; + } + offset = fw_parse_program_data(tas_dev, tas_fmw, &fmw, offset); + if (offset < 0) { + dev_err(tas_dev->dev, "fw_parse_program_data EXIT!\n"); + ret = offset; + goto out; + } + offset = fw_parse_configuration_data(tas_dev, tas_fmw, &fmw, + offset); + if (offset < 0) { + dev_err(tas_dev->dev, "fw_parse_configuration_data EXIT!\n"); + ret = offset; + goto out; + } + offset = fw_parse_calibration_data(tas_dev, + tas_fmw, &fmw, offset); + if (offset < 0) { + dev_err(tas_dev->dev, "fw_parse_calibration_data EXIT!\n"); + ret = offset; + goto out; + } + tasdev->is_calibrated_data_loaded = true; +out: + if (fw_entry) { + release_firmware(fw_entry); + fw_entry = NULL; + } + return ret; +} + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr; + struct tasdevice_fw *tas_fmw; + int offset = 0; + int ret = 0; + + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, "%s: Failed to read firmware %s\n", + __func__, tas_dev->coef_binaryname); + ret = -EINVAL; + goto out; + } + + tas_dev->fmw = kcalloc(1, sizeof(struct tasdevice_fw), GFP_KERNEL); + if (!tas_dev->fmw) { + ret = -ENOMEM; + goto out; + } + tas_fmw = tas_dev->fmw; + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, fmw, offset); + + if (offset == -EINVAL) + goto out; + fw_fixed_hdr = &(tas_fmw->fw_hdr.fixed_hdr); + switch (fw_fixed_hdr->drv_ver) { + case 0x301: + case 0x302: + case 0x502: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + break; + case 0x202: + case 0x400: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + if (fw_fixed_hdr->drv_ver == 0x100) { + if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + } else { + switch (fw_fixed_hdr->ppcver) { + case 0x00: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + dev_err(tas_dev->dev, + "%s: PPCVersion must be 0x0 or 0x%02x", + __func__, PPC3_VERSION); + dev_err(tas_dev->dev, " Current:0x%02x\n", + fw_fixed_hdr->ppcver); + offset = -EINVAL; + break; + } + } + } else { + dev_err(tas_dev->dev, + "DriverVersion must be 0x0, 0x230 or above 0x230 "); + dev_err(tas_dev->dev, "current is 0x%02x\n", + fw_fixed_hdr->drv_ver); + offset = -EINVAL; + } + break; + } + + offset = tas_dev->fw_parse_variable_header(tas_dev, fmw, offset); + if (offset < 0) { + ret = offset; + goto out; + } + offset = tas_dev->fw_parse_program_data(tas_dev, tas_fmw, fmw, + offset); + if (offset < 0) { + ret = offset; + goto out; + } + offset = tas_dev->fw_parse_configuration_data(tas_dev, + tas_fmw, fmw, offset); + if (offset < 0) + ret = offset; + +out: + return ret; +} + +void tasdevice_calbin_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice *tasdev; + int i; + + if (tas_dev) { + for (i = 0; i < tas_dev->ndev; i++) { + tasdev = &(tas_dev->tasdevice[i]); + if (tasdev->cali_data_fmw) { + tas2781_clear_calfirmware( + tasdev->cali_data_fmw); + tasdev->cali_data_fmw = NULL; + } + } + } +} + +static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog) +{ + struct tasdevice_data *im; + struct tasdev_blk *blk; + unsigned int nr_blk; + + if (prog) { + im = &(prog->dev_data); + + if (!im->dev_blks) + return; + + for (nr_blk = 0; nr_blk < im->nr_blk; nr_blk++) { + blk = &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); + } +} + +static void tasdev_dsp_prog_remove(struct tasdevice_prog *prog, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_prog_blk_remove(&prog[i]); + kfree(prog); +} + +static void tasdev_dsp_cfg_blk_remove(struct tasdevice_config *cfg) +{ + struct tasdevice_data *im; + struct tasdev_blk *blk; + unsigned int nr_blk; + + if (cfg) { + im = &(cfg->dev_data); + + if (!im->dev_blks) + return; + + for (nr_blk = 0; nr_blk < im->nr_blk; nr_blk++) { + blk = &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); + } +} + +static void tasdev_dsp_cfg_remove(struct tasdevice_config *config, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_cfg_blk_remove(&config[i]); + kfree(config); +} + +void tasdevice_dsp_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + + if (tas_dev->fmw) { + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + + if (tas_fmw->programs) + tasdev_dsp_prog_remove(tas_fmw->programs, + tas_fmw->nr_programs); + if (tas_fmw->configs) + tasdev_dsp_cfg_remove(tas_fmw->configs, + tas_fmw->nr_configurations); + kfree(tas_fmw); + tas_dev->fmw = NULL; + } +} + +static int tas2781_set_calibration(void *context, enum channel i, + int n_calibration) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice *tasdevice = &(tas_dev->tasdevice[i]); + struct tasdevice_fw *cal_fmw = tasdevice->cali_data_fmw; + int ret = 0; + + if ((!tas_dev->fmw->programs) || (!tas_dev->fmw->configs)) { + dev_err(tas_dev->dev, "%s, Firmware not loaded\n\r", __func__); + ret = 0; + goto out; + } + + if (n_calibration == 0xFF || (n_calibration == 0x100 + && tasdevice->is_calibrated_data_loaded == false)) { + if (cal_fmw) { + tasdevice->is_calibrated_data_loaded = false; + tas2781_clear_calfirmware(cal_fmw); + cal_fmw = NULL; + } + + scnprintf(tas_dev->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", + tas_dev->dev_name, tas_dev->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_dev, + tas_dev->cal_binaryname[i], i); + if (ret != 0) { + dev_err(tas_dev->dev, + "%s: load %s error, no-side effect\n", + __func__, tas_dev->cal_binaryname[i]); + ret = 0; + } + } + tasdevice->is_loading = true; + tasdevice->is_loaderr = false; + + if (cal_fmw) { + struct tasdevice_calibration *calibration = + cal_fmw->calibrations; + + if (calibration) + tasdevice_load_calibrated_data(tas_dev, + &(calibration->dev_data)); + } else + dev_err(tas_dev->dev, "%s: No calibrated data for dev %d\n", + __func__, i); + +out: + return ret; +} + +int tasdevice_select_tuningprm_cfg(void *context, int prm_no, + int cfg_no, int rca_conf_no) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_prog *program; + struct tasdevice_config *conf; + int prog_status = 0; + int status, i; + + if (!tas_fmw) { + dev_err(tas_dev->dev, "%s: Firmware is NULL\n", __func__); + goto out; + } + + if (cfg_no >= tas_fmw->nr_configurations) { + dev_err(tas_dev->dev, + "%s: cfg(%d) is not in range of conf %u\n", + __func__, cfg_no, tas_fmw->nr_configurations); + goto out; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_dev->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + goto out; + } + + if (rca_conf_no > rca->ncfgs || rca_conf_no <= 0 || + !cfg_info) { + dev_err(tas_dev->dev, + "conf_no:%d should be in range from 0 to %u\n", + rca_conf_no, rca->ncfgs-1); + goto out; + } + + conf = &(tas_fmw->configs[cfg_no]); + for (i = 0, prog_status = 0; i < tas_dev->ndev; i++) { + if (cfg_info[rca_conf_no]->active_dev & (1 << i)) { + if (tas_dev->tasdevice[i].cur_prog != prm_no) { + tas_dev->tasdevice[i].cur_conf = -1; + tas_dev->tasdevice[i].is_loading = true; + prog_status++; + } + } else + tas_dev->tasdevice[i].is_loading = false; + tas_dev->tasdevice[i].is_loaderr = false; + } + + if (prog_status) { + program = &(tas_fmw->programs[prm_no]); + tasdevice_load_data(tas_dev, &(program->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) + continue; + else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) { + struct tasdevice_fw *cal_fmw = + tas_dev->tasdevice[i].cali_data_fmw; + + if (cal_fmw) { + struct tasdevice_calibration + *calibration = + cal_fmw->calibrations; + + if (calibration) + tasdevice_load_calibrated_data( + tas_dev, + &(calibration->dev_data)); + } + tas_dev->tasdevice[i].cur_prog = prm_no; + } + } + } + + if (tas_dev->is_glb_calibrated_data_loaded == false) { + for (i = 0; i < tas_dev->ndev; i++) + tas2781_set_calibration(tas_dev, i, 0x100); + tas_dev->is_glb_calibrated_data_loaded = true; + /* Unwise to reload calibrationdata everytime, + * this code will work once even if calibrated + * data still failed to be got + */ + } + + for (i = 0, status = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].cur_conf != cfg_no + && (cfg_info[rca_conf_no]->active_dev & (1 << i)) + && (tas_dev->tasdevice[i].is_loaderr == false)) { + status++; + tas_dev->tasdevice[i].is_loading = true; + } else + tas_dev->tasdevice[i].is_loading = false; + } + + if (status) { + status = 0; + tasdevice_load_data(tas_dev, &(conf->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) { + status |= 1 << (i + 4); + continue; + } else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) + tas_dev->tasdevice[i].cur_conf = cfg_no; + } + } else + dev_err(tas_dev->dev, + "%s: No device is in active in conf %d\n", + __func__, rca_conf_no); + + status |= cfg_info[rca_conf_no]->active_dev; +out: + return prog_status; +} diff --git a/sound/soc/codecs/tas2781-dsp.h b/sound/soc/codecs/tas2781-dsp.h new file mode 100644 index 000000000000..6c6480fb14b1 --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.h @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TASDEVICE_DSP_H__ +#define __TASDEVICE_DSP_H__ + +#define MAIN_ALL_DEVICES 0x0d +#define MAIN_DEVICE_A 0x01 +#define MAIN_DEVICE_B 0x08 +#define MAIN_DEVICE_C 0x10 +#define MAIN_DEVICE_D 0x14 +#define COEFF_DEVICE_A 0x03 +#define COEFF_DEVICE_B 0x0a +#define COEFF_DEVICE_C 0x11 +#define COEFF_DEVICE_D 0x15 +#define PRE_DEVICE_A 0x04 +#define PRE_DEVICE_B 0x0b +#define PRE_DEVICE_C 0x12 +#define PRE_DEVICE_D 0x16 + +#define PPC3_VERSION 0x4100 +#define RCA_CONFIGID_BYPASS_ALL 0 +#define TASDEVICE_DEVICE_SUM 8 +#define TASDEVICE_CONFIG_SUM 64 + +enum channel { + top_left_Chn, + top_right_chn, + bottom_left_Chn, + bottom_right_chn, + max_chn, +}; + +enum tasdevice_dsp_dev_idx { + TASDEVICE_DSP_TAS_2555 = 0, + TASDEVICE_DSP_TAS_2555_STEREO, + TASDEVICE_DSP_TAS_2557_MONO, + TASDEVICE_DSP_TAS_2557_DUAL_MONO, + TASDEVICE_DSP_TAS_2559, + TASDEVICE_DSP_TAS_2563, + TASDEVICE_DSP_TAS_2563_DUAL_MONO = 7, + TASDEVICE_DSP_TAS_2563_QUAD, + TASDEVICE_DSP_TAS_2563_21, + TASDEVICE_DSP_TAS_2781, + TASDEVICE_DSP_TAS_2781_DUAL_MONO, + TASDEVICE_DSP_TAS_2781_21, + TASDEVICE_DSP_TAS_2781_QUAD, + TASDEVICE_DSP_TAS_MAX_DEVICE +}; + +struct tasdevice_fw_fixed_hdr { + unsigned int fwsize; + unsigned int ppcver; + unsigned int drv_ver; +}; + +struct tasdevice_dspfw_hdr { + struct tasdevice_fw_fixed_hdr fixed_hdr; + unsigned short device_family; + unsigned short device; + unsigned char ndev; +}; + +struct tasdev_blk { + int nr_retry; + unsigned int type; + unsigned char is_pchksum_present; + unsigned char pchksum; + unsigned char is_ychksum_present; + unsigned char ychksum; + unsigned int nr_cmds; + unsigned int blk_size; + unsigned int nr_subblocks; + unsigned char *data; +}; + +struct tasdevice_data { + char name[64]; + unsigned int nr_blk; + struct tasdev_blk *dev_blks; +}; +struct tasdevice_prog { + unsigned int prog_size; + struct tasdevice_data dev_data; +}; + +struct tasdevice_config { + unsigned int cfg_size; + char name[64]; + struct tasdevice_data dev_data; +}; + +struct tasdevice_calibration { + struct tasdevice_data dev_data; +}; + +struct tasdevice_fw { + struct tasdevice_dspfw_hdr fw_hdr; + unsigned short nr_programs; + struct tasdevice_prog *programs; + unsigned short nr_configurations; + struct tasdevice_config *configs; + unsigned short nr_calibrations; + struct tasdevice_calibration *calibrations; + struct device *dev; +}; + +enum tasdevice_dsp_fw_state { + TASDEVICE_DSP_FW_NONE = 0, + TASDEVICE_DSP_FW_PENDING, + TASDEVICE_DSP_FW_FAIL, + TASDEVICE_DSP_FW_ALL_OK, +}; + +enum tasdevice_bin_blk_type { + TASDEVICE_BIN_BLK_COEFF = 1, + TASDEVICE_BIN_BLK_POST_POWER_UP, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN, + TASDEVICE_BIN_BLK_PRE_POWER_UP, + TASDEVICE_BIN_BLK_POST_SHUTDOWN +}; + +struct tasdevice_rca_hdr { + unsigned int img_sz; + unsigned int checksum; + unsigned int binary_version_num; + unsigned int drv_fw_version; + unsigned char plat_type; + unsigned char dev_family; + unsigned char reserve; + unsigned char ndev; + unsigned char devs[TASDEVICE_DEVICE_SUM]; + unsigned int nconfig; + unsigned int config_size[TASDEVICE_CONFIG_SUM]; +}; + +struct tasdev_blk_data { + unsigned char dev_idx; + unsigned char block_type; + unsigned short yram_checksum; + unsigned int block_size; + unsigned int n_subblks; + unsigned char *regdata; +}; + +struct tasdevice_config_info { + unsigned int nblocks; + unsigned int real_nblocks; + unsigned char active_dev; + struct tasdev_blk_data **blk_data; +}; + +struct tasdevice_rca { + struct tasdevice_rca_hdr fw_hdr; + int ncfgs; + struct tasdevice_config_info **cfg_info; + int profile_cfg_id; +}; + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context); +void tasdevice_dsp_remove(void *context); +void tasdevice_calbin_remove(void *context); +int tas2781_load_calibration(void *tas_dev, char *filename, + enum channel i); +int tasdevice_select_tuningprm_cfg(void *context, int prm, + int cfg_no, int rca_conf_no); + +#endif diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c new file mode 100644 index 000000000000..d34b81a3a130 --- /dev/null +++ b/sound/soc/codecs/tas2781-i2c.c @@ -0,0 +1,1621 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "tas2781.h" + +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d + +const char *blocktype[5] = { + "COEFF", + "POST_POWER_UP", + "PRE_SHUTDOWN", + "PRE_POWER_UP", + "POST_SHUTDOWN" +}; + +static const struct i2c_device_id tasdevice_id[] = { + { "tas2781", TAS2781 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tasdevice_id); + +static const struct regmap_range_cfg tasdevice_ranges[] = { + { + .range_min = 0, + .range_max = 256 * 128, + .selector_reg = TASDEVICE_PAGE_SELECT, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 128, + }, +}; + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 16, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .ranges = tasdevice_ranges, + .num_ranges = ARRAY_SIZE(tasdevice_ranges), + .max_register = 256 * 128, +}; + +static const struct of_device_id tasdevice_of_match[] = { + { .compatible = "ti,tas2781" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, tasdevice_of_match); + +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + unsigned char subblk_typ = data[1]; + bool is_err = false; + int blktyp = dev_idx & 0xC0; + int idx = dev_idx & 0x3F; + int subblk_offset; + int chn, chnend; + int rc; + + if (idx) { + chn = idx-1; + chnend = idx; + } else { + if (tas_dev->set_global_mode) { + chn = tas_dev->ndev; + chnend = tas_dev->ndev + 1; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + } + + for (; chn < chnend; chn++) { + if (!tas_dev->set_global_mode && + tas_dev->tasdevice[chn].is_loading == false) + continue; + + is_err = false; + subblk_offset = 2; + switch (subblk_typ) { + case TASDEVICE_CMD_SING_W: { + int i = 0; + unsigned short len = SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 * len > sublocksize) { + dev_err(tas_dev->dev, + "process_block: Out of bounary\n"); + is_err = true; + break; + } + + for (i = 0; i < len; i++) { + rc = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + data[subblk_offset + 3]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "process_block: single write error\n"); + } + subblk_offset += 4; + } + } + break; + case TASDEVICE_CMD_BURST: { + unsigned short len = + SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 + len > sublocksize) { + dev_err(tas_dev->dev, + "%s: BST Out of bounary\n", + __func__); + is_err = true; + break; + } + if (len % 4) { + dev_err(tas_dev->dev, + "%s:Bst-len(%u)not div by 4\n", + __func__, len); + break; + } + + rc = tasdevice_dev_bulk_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + &(data[subblk_offset + 4]), + len); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: bulk_write error = %d\n", + __func__, rc); + } + subblk_offset += (len + 4); + } + break; + case TASDEVICE_CMD_DELAY: { + unsigned int sleep_time = 0; + + if (subblk_offset + 2 > sublocksize) { + dev_err(tas_dev->dev, + "%s: deley Out of bounary\n", + __func__); + is_err = true; + break; + } + sleep_time = SMS_HTONS(data[2], data[3]) * 1000; + usleep_range(sleep_time, sleep_time + 50); + subblk_offset += 2; + } + break; + case TASDEVICE_CMD_FIELD_W: + if (subblk_offset + 6 > sublocksize) { + dev_err(tas_dev->dev, + "%s: bit write Out of bounary\n", + __func__); + is_err = true; + break; + } + rc = tasdevice_dev_update_bits(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset + 2], + data[subblk_offset + 3], + data[subblk_offset + 4]), + data[subblk_offset + 1], + data[subblk_offset + 5]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: update_bits error = %d\n", + __func__, rc); + } + subblk_offset += 6; + break; + default: + break; + }; + if (is_err == true && blktyp != 0) { + if (blktyp == 0x80) { + tas_dev->tasdevice[chn].cur_prog = -1; + tas_dev->tasdevice[chn].cur_conf = -1; + } else + tas_dev->tasdevice[chn].cur_conf = -1; + } + } + return subblk_offset; +} + +static void tasdevice_select_cfg_blk(void *pContext, int conf_no, + unsigned char block_type) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) pContext; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + int j, k, chn, chnend; + + if (conf_no >= rca->ncfgs || conf_no < 0 || !cfg_info) { + dev_err(tas_dev->dev, + "conf_no should be not more than %u\n", + rca->ncfgs); + goto out; + } + + for (j = 0; j < (int)cfg_info[conf_no]->real_nblocks; j++) { + unsigned int length = 0, rc = 0; + + if (block_type > 5 || block_type < 2) { + dev_err(tas_dev->dev, + "block_type should be in range from 2 to 5\n"); + goto out; + } + if (block_type != cfg_info[conf_no]->blk_data[j]->block_type) + continue; + + for (k = 0; k < (int)cfg_info[conf_no]->blk_data[j]->n_subblks; + k++) { + if (cfg_info[conf_no]->blk_data[j]->dev_idx) { + chn = + cfg_info[conf_no]->blk_data[j]->dev_idx + - 1; + chnend = + cfg_info[conf_no]->blk_data[j]->dev_idx; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + for (; chn < chnend; chn++) + tas_dev->tasdevice[chn].is_loading = true; + + rc = tasdevice_process_block(tas_dev, + cfg_info[conf_no]->blk_data[j]->regdata + + length, + cfg_info[conf_no]->blk_data[j]->dev_idx, + cfg_info[conf_no]->blk_data[j]->block_size - + length); + length += rc; + if (cfg_info[conf_no]->blk_data[j]->block_size < + length) { + dev_err(tas_dev->dev, + "%s: %u %u out of boundary\n", + __func__, length, + cfg_info[conf_no]->blk_data[j] + ->block_size); + break; + } + } + if (length != cfg_info[conf_no]->blk_data[j]->block_size) + dev_err(tas_dev->dev, "%s: %u %u size is not same\n", + __func__, length, + cfg_info[conf_no]->blk_data[j]->block_size); + + } + +out: + return; +} + +static struct tasdevice_config_info *tasdevice_add_config( + void *context, unsigned char *config_data, + unsigned int config_size) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + struct tasdevice_config_info *cfg_info; + int config_offset = 0; + int i; + + cfg_info = kzalloc( + sizeof(struct tasdevice_config_info), GFP_KERNEL); + if (!cfg_info) + goto out; + + if (tas_dev->rcabin.fw_hdr.binary_version_num >= 0x105) { + if (config_offset + 64 > (int)config_size) { + dev_err(tas_dev->dev, "add config: Out of bounary\n"); + goto out; + } + config_offset += 64; + } + + if (config_offset + 4 > (int)config_size) { + dev_err(tas_dev->dev, "add config: Out of bounary\n"); + goto out; + } + cfg_info->nblocks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data = kcalloc( + cfg_info->nblocks, sizeof(struct tasdev_blk_data *), + GFP_KERNEL); + if (!cfg_info->blk_data) + goto out; + + cfg_info->real_nblocks = 0; + for (i = 0; i < (int)cfg_info->nblocks; i++) { + if (config_offset + 12 > config_size) { + dev_err(tas_dev->dev, + "add config: Out of bounary: i = %d nblocks = %u!\n", + i, cfg_info->nblocks); + break; + } + cfg_info->blk_data[i] = kzalloc( + sizeof(struct tasdev_blk_data), GFP_KERNEL); + if (!cfg_info->blk_data[i]) + break; + + cfg_info->blk_data[i]->dev_idx = config_data[config_offset]; + config_offset++; + + cfg_info->blk_data[i]->block_type = config_data[config_offset]; + config_offset++; + + if (cfg_info->blk_data[i]->block_type == + TASDEVICE_BIN_BLK_PRE_POWER_UP) { + if (cfg_info->blk_data[i]->dev_idx == 0) + cfg_info->active_dev = 1; + else + cfg_info->active_dev = + 1 << + (cfg_info->blk_data[i]->dev_idx - 1); + + } + cfg_info->blk_data[i]->yram_checksum = + SMS_HTONS(config_data[config_offset], + config_data[config_offset + 1]); + config_offset += 2; + cfg_info->blk_data[i]->block_size = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data[i]->n_subblks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + + config_offset += 4; + cfg_info->blk_data[i]->regdata = kzalloc( + cfg_info->blk_data[i]->block_size, GFP_KERNEL); + if (!cfg_info->blk_data[i]->regdata) + goto out; + + if (config_offset + cfg_info->blk_data[i]->block_size + > config_size) { + dev_err(tas_dev->dev, + "%s: block_size Out of bounary: i = %d blks = %u!\n", + __func__, i, cfg_info->nblocks); + break; + } + memcpy(cfg_info->blk_data[i]->regdata, + &config_data[config_offset], + cfg_info->blk_data[i]->block_size); + config_offset += cfg_info->blk_data[i]->block_size; + cfg_info->real_nblocks += 1; + } +out: + return cfg_info; +} + +/** + * tas2781_digital_getvol - get the volum control + * @kcontrol: control pointer + * @ucontrol: User data + * Customer Kcontrol for tas2781 is primarily for regmap booking, paging + * depends on internal regmap mechanism. + * tas2781 contains book and page two-level register map, especially + * book switching will set the register BXXP00R7F, after switching to the + * correct book, then leverage the mechanism for paging to access the register. + */ +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int invert = mc->invert; + int max = mc->max; + int ret = 0; + int val; + + /* Read the primary device as the whole */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, "%s, get digital vol error\n", __func__); + goto out; + } + + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int invert = mc->invert; + int max = mc->max; + int err_cnt = 0; + int ret = 1; + int val, i; + + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + + if (!tas_dev->set_global_mode) { + ret = tasdevice_dev_write(tas_dev, tas_dev->ndev, + mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_dev->dev, "%s, error in global mode\n", + __func__); + } + + if (!tas_dev->set_global_mode || ret == 1) { + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, mc->reg, + (unsigned int)val); + if (ret) { + err_cnt++; + dev_err(tas_dev->dev, + "set digital vol err in dev %d\n", i); + } + } + } + /* All the devices set error, return 0*/ + return (err_cnt == tas_dev->ndev) ? 0 : 1; +} + +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int invert = mc->invert; + unsigned char mask = 0; + int max = mc->max; + int ret = 0; + int val; + + /* Read the primary device */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int invert = mc->invert; + unsigned char mask; + int max = mc->max; + int err_cnt = 0; + int val, i, ret; + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + mc->reg, mask, (unsigned int)(val << mc->shift)); + if (ret) { + err_cnt++; + dev_err(tas_dev->dev, "set AMP vol error in dev %d\n", + i); + } + } + + /* All the devices set error, return 0*/ + return (err_cnt == tas_dev->ndev) ? 0 : 1; +} + +static const DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); +static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); + +static const struct snd_kcontrol_new tas2781_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), +}; + +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + + tas_dev->rcabin.profile_cfg_id = + ucontrol->value.integer.value[0]; + + return 1; +} + +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_programs; + + return 0; +} + +static int tasdevice_info_configurations( + struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec = + snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_configurations - 1; + + return 0; +} + +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 1; + uinfo->value.integer.max = max(0, tas_dev->rcabin.ncfgs); + + return 0; +} + +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = + tas_dev->rcabin.profile_cfg_id; + + return 0; +} + +static int tasdevice_create_controls(struct tasdevice_priv *tas_dev) +{ + struct snd_kcontrol_new *tasdevice_profile_controls; + int nr_controls = 1; + int mix_index = 0; + int ret; + char *name; + + tasdevice_profile_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_profile_controls[0]), + GFP_KERNEL); + if (!tasdevice_profile_controls) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!name) { + ret = -ENOMEM; + goto out; + } + scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "TASDEVICE Profile id"); + tasdevice_profile_controls[mix_index].name = name; + tasdevice_profile_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_profile_controls[mix_index].info = + tasdevice_info_profile; + tasdevice_profile_controls[mix_index].get = + tasdevice_get_profile_id; + tasdevice_profile_controls[mix_index].put = + tasdevice_set_profile_id; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_profile_controls, + nr_controls < mix_index ? nr_controls : mix_index); + +out: + return ret; +} + +static int tasdevice_program_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tasdev = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = tasdev->cur_prog; + + return 0; +} + +static int tasdevice_program_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tasdev = snd_soc_component_get_drvdata(codec); + unsigned int nr_program = ucontrol->value.integer.value[0]; + + tasdev->cur_prog = nr_program; + + return 1; +} + +static int tasdevice_configuration_get( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tasdev = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = tasdev->cur_conf; + + return 0; +} + +static int tasdevice_configuration_put( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int nr_configuration = ucontrol->value.integer.value[0]; + + tas_dev->cur_conf = nr_configuration; + + return 1; +} + +static int tasdevice_dsp_create_control( + struct tasdevice_priv *tas_dev) +{ + struct snd_kcontrol_new *tasdevice_dsp_controls; + char *program_name, *configuration_name; + int nr_controls = 2; + int mix_index = 0; + int ret; + + tasdevice_dsp_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_dsp_controls[0]), GFP_KERNEL); + if (!tasdevice_dsp_controls) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + program_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + configuration_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!program_name || !configuration_name) { + ret = -ENOMEM; + goto out; + } + + scnprintf(program_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "Program"); + tasdevice_dsp_controls[mix_index].name = program_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_programs; + tasdevice_dsp_controls[mix_index].get = + tasdevice_program_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_program_put; + mix_index++; + + scnprintf(configuration_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "Configuration"); + tasdevice_dsp_controls[mix_index].name = configuration_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_configurations; + tasdevice_dsp_controls[mix_index].get = + tasdevice_configuration_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_configuration_put; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_dsp_controls, + nr_controls < mix_index ? nr_controls : mix_index); +out: + return ret; +} + +static void tasdevice_rca_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + struct tasdevice_config_info **cfg_info = NULL; + struct tasdevice_rca_hdr *fw_hdr; + struct tasdevice_rca *rca; + const struct firmware *fw_entry; + unsigned int total_config_sz = 0; + unsigned char *buf; + int offset = 0; + int i, ret; + + mutex_lock(&tas_dev->codec_lock); + rca = &(tas_dev->rcabin); + fw_hdr = &(rca->fw_hdr); + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, + "Failed to read %s, no side - effect on driver running\n", + tas_dev->rca_binaryname); + ret = -EINVAL; + goto out; + } + buf = (unsigned char *)fmw->data; + + fw_hdr->img_sz = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + if (fw_hdr->img_sz != fmw->size) { + dev_err(tas_dev->dev, + "File size not match, %d %u", (int)fmw->size, + fw_hdr->img_sz); + ret = -EINVAL; + goto out; + } + + fw_hdr->checksum = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + fw_hdr->binary_version_num = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + if (fw_hdr->binary_version_num < 0x103) { + dev_err(tas_dev->dev, "File version 0x%04x is too low", + fw_hdr->binary_version_num); + ret = -EINVAL; + goto out; + } + offset += 4; + fw_hdr->drv_fw_version = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 8; + fw_hdr->plat_type = buf[offset]; + offset += 1; + fw_hdr->dev_family = buf[offset]; + offset += 1; + fw_hdr->reserve = buf[offset]; + offset += 1; + fw_hdr->ndev = buf[offset]; + offset += 1; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "ndev(%u) fro rcabin and ndev(%u) fro DTS NOT match\n", + fw_hdr->ndev, tas_dev->ndev); + ret = -EINVAL; + goto out; + } + if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { + dev_err(tas_dev->dev, "rca_ready: Out of bounary!\n"); + ret = -EINVAL; + goto out; + } + + for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) + fw_hdr->devs[i] = buf[offset]; + + fw_hdr->nconfig = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { + fw_hdr->config_size[i] = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + total_config_sz += fw_hdr->config_size[i]; + } + + if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { + dev_err(tas_dev->dev, "Bin file error!\n"); + ret = -EINVAL; + goto out; + } + cfg_info = kcalloc(fw_hdr->nconfig, + sizeof(struct tasdevice_config_info *), + GFP_KERNEL); + + if (!cfg_info) { + ret = -EINVAL; + goto out; + } + rca->cfg_info = cfg_info; + rca->ncfgs = 0; + for (i = 0; i < (int)fw_hdr->nconfig; i++) { + cfg_info[i] = tasdevice_add_config(context, &buf[offset], + fw_hdr->config_size[i]); + if (!cfg_info[i]) { + ret = -EINVAL; + break; + } + offset += (int)fw_hdr->config_size[i]; + rca->ncfgs += 1; + } + tasdevice_create_controls(tas_dev); + + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; + scnprintf(tas_dev->coef_binaryname, 64, "%s_coef.bin", + tas_dev->dev_name); + ret = request_firmware(&fw_entry, tas_dev->coef_binaryname, + tas_dev->dev); + if (!ret) { + ret = tasdevice_dspfw_ready(fw_entry, tas_dev); + release_firmware(fw_entry); + fw_entry = NULL; + } else { + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + dev_err(tas_dev->dev, "%s: load %s error\n", __func__, + tas_dev->coef_binaryname); + goto out; + } + tasdevice_dsp_create_control(tas_dev); + + tas_dev->fw_state = TASDEVICE_DSP_FW_ALL_OK; + tas_dev->is_glb_calibrated_data_loaded = true; + for (i = 0; i < tas_dev->ndev; i++) { + scnprintf(tas_dev->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", + tas_dev->dev_name, tas_dev->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_dev, + tas_dev->cal_binaryname[i], i); + if (ret != 0) { + dev_err(tas_dev->dev, + "%s: load %s error, no-side effect\n", + __func__, tas_dev->cal_binaryname[i]); + ret = 0; + tas_dev->is_glb_calibrated_data_loaded = false; + } + } + +out: + mutex_unlock(&tas_dev->codec_lock); + if (fmw) + release_firmware(fmw); +} + +static void tasdevice_config_info_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + int i, j; + + if (cfg_info) { + for (i = 0; i < rca->ncfgs; i++) { + if (cfg_info[i]) { + for (j = 0; j < (int)cfg_info[i]->real_nblocks; + j++) { + kfree( + cfg_info[i]->blk_data[j]->regdata); + kfree(cfg_info[i]->blk_data[j]); + } + kfree(cfg_info[i]->blk_data); + kfree(cfg_info[i]); + } + } + kfree(cfg_info); + } +} + +static void tasdevice_tuning_switch( + struct tasdevice_priv *tas_dev, int state) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + int profile_cfg_id = 0; + + if (state == 0) { + if (tas_fmw) { + if (tas_dev->cur_prog >= tas_fmw->nr_programs) + /*bypass all in rca is profile id 0*/ + profile_cfg_id = RCA_CONFIGID_BYPASS_ALL; + else { + /*dsp mode or tuning mode*/ + profile_cfg_id = + tas_dev->rcabin.profile_cfg_id; + + tasdevice_select_tuningprm_cfg(tas_dev, + tas_dev->cur_prog, + tas_dev->cur_conf, + profile_cfg_id); + if (tas_dev->set_global_mode) + tas_dev->set_global_mode(tas_dev); + } + } else + profile_cfg_id = RCA_CONFIGID_BYPASS_ALL; + + tasdevice_select_cfg_blk(tas_dev, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + } else + tasdevice_select_cfg_blk(tas_dev, + tas_dev->rcabin.profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN); +} + +static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *codec = snd_soc_dapm_to_component(w->dapm); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int state = 1; + + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + if (event == SND_SOC_DAPM_PRE_PMD) + state = 0; + tasdevice_tuning_switch(tas_dev, state); + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + return 0; +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT_E("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0, tasdevice_dapm_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_SPK("SPK", tasdevice_dapm_event), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC") +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"SPK", NULL, "ASI"}, + {"OUT", NULL, "SPK"}, + {"ASI OUT", NULL, "DMIC"} +}; + +static int tasdevice_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *codec = dai->component; + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int ret = 0; + + if (tas_dev->fw_state != TASDEVICE_DSP_FW_ALL_OK) { + dev_err(tas_dev->dev, "DSP bin file not loaded\n"); + ret = -EINVAL; + } + return ret; +} + +static int tasdevice_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(dai); + unsigned int slot_width; + unsigned int fsrate; + int bclk_rate; + int rc = 0; + + fsrate = params_rate(params); + switch (fsrate) { + case 48000: + break; + case 44100: + break; + default: + dev_err(tas_dev->dev, "%s: incorrect sample rate = %u\n", + __func__, fsrate); + rc = -EINVAL; + goto out; + } + + slot_width = params_width(params); + switch (slot_width) { + case 16: + break; + case 20: + break; + case 24: + break; + case 32: + break; + default: + dev_err(tas_dev->dev, "%s: incorrect slot width = %u\n", + __func__, slot_width); + rc = -EINVAL; + goto out; + } + + bclk_rate = snd_soc_params_to_bclk(params); + if (bclk_rate < 0) { + dev_err(tas_dev->dev, "%s: incorrect bclk rate = %d\n", + __func__, bclk_rate); + rc = bclk_rate; + goto out; + } +out: + return rc; +} + +static int tasdevice_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(codec_dai); + + tas_dev->sysclk = freq; + + return 0; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .startup = tasdevice_startup, + .hw_params = tasdevice_hw_params, + .set_sysclk = tasdevice_set_dai_sysclk, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2781_codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static void tas2781_reset(struct tasdevice_priv *tas_dev) +{ + int ret, i; + + if (tas_dev->reset) { + gpiod_set_value_cansleep(tas_dev->reset, 0); + usleep_range(500, 1000); + gpiod_set_value_cansleep(tas_dev->reset, 1); + } else { + + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, + TAS2871_REG_SWRESET, + TAS2871_REG_SWRESET_RESET); + if (ret < 0) + dev_err(tas_dev->dev, + "dev %d swreset fail, %d\n", + i, ret); + } + } + usleep_range(1000, 1050); +} + +static int tasdevice_codec_probe( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int ret; + + /* Codec Lock Hold to ensure that codec_probe and firmware parsing and + * loading do not simultaneously execute. + */ + mutex_lock(&tas_dev->codec_lock); + + crc8_populate_msb(tas_dev->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); + tas_dev->codec = codec; + scnprintf(tas_dev->rca_binaryname, 64, "%s_rca.bin", + tas_dev->dev_name); + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL, tas_dev, + tasdevice_rca_ready); + if (ret) + dev_err(tas_dev->dev, "request_firmware_nowait err:0x%08x\n", + ret); + + tas2781_reset(tas_dev); + if (tas_dev->set_global_mode) + tas_dev->set_global_mode(tas_dev); + + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + return ret; +} + +static void tasdevice_deinit(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + + tasdevice_config_info_remove(tas_dev); + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; +} + +static void tasdevice_codec_remove( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + + tasdevice_deinit(tas_dev); + +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_codec_probe, + .remove = tasdevice_codec_remove, + .controls = tas2781_snd_controls, + .num_controls = ARRAY_SIZE(tas2781_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_parse_dt(struct tasdevice_priv *tas_dev) +{ + struct i2c_client *client = (struct i2c_client *)tas_dev->client; + unsigned int dev_addrs[max_chn]; + int rc, i, ndev; + + if (tas_dev->isacpi) { + ndev = device_property_read_u32_array(&client->dev, + "ti,audio-slots", NULL, 0); + if (ndev <= 0) { + ndev = 1; + dev_addrs[0] = client->addr; + } else { + ndev = (ndev < ARRAY_SIZE(dev_addrs)) + ? ndev : ARRAY_SIZE(dev_addrs); + ndev = device_property_read_u32_array(&client->dev, + "ti,audio-slots", dev_addrs, ndev); + } + + tas_dev->irq_info.irq_gpio = + acpi_dev_gpio_irq_get(ACPI_COMPANION(&client->dev), 0); + } else { + struct device_node *np = tas_dev->dev->of_node; + + ndev = of_property_read_variable_u32_array(np, + "ti,audio-slots", dev_addrs, 0, ARRAY_SIZE(dev_addrs)); + if (ndev <= 0) { + ndev = 1; + dev_addrs[0] = client->addr; + } + tas_dev->irq_info.irq_gpio = of_irq_get(np, 0); + } + tas_dev->ndev = ndev; + for (i = 0; i < ndev; i++) + tas_dev->tasdevice[i].dev_addr = dev_addrs[i]; + + if (ndev > 1) { + rc = device_property_read_u32(&client->dev, + "ti,broadcast-addr", + &(tas_dev->glb_addr.dev_addr)); + if (rc) { + dev_err(tas_dev->dev, + "Looking up broadcast-addr failed %d\n", rc); + tas_dev->glb_addr.dev_addr = 0; + } + } + + tas_dev->reset = devm_gpiod_get_optional(&client->dev, + "reset-gpios", GPIOD_OUT_HIGH); + if (IS_ERR(tas_dev->reset)) + dev_err(tas_dev->dev, "%s Can't get reset GPIO\n", + __func__); + + strcpy(tas_dev->dev_name, tasdevice_id[tas_dev->chip_id].name); + + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) { + rc = gpio_request(tas_dev->irq_info.irq_gpio, + "AUDEV-IRQ"); + if (!rc) { + gpio_direction_input( + tas_dev->irq_info.irq_gpio); + + tas_dev->irq_info.irq = + gpio_to_irq(tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, "%s: GPIO %d request error\n", + __func__, tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, + "Looking up irq-gpio property failed %d\n", + tas_dev->irq_info.irq_gpio); + + return 0; +} + +static int tasdevice_change_chn_book(struct tasdevice_priv *tas_dev, + enum channel chn, int book) +{ + struct i2c_client *client = (struct i2c_client *)tas_dev->client; + int ret = 0; + + if (chn < tas_dev->ndev) { + if (tas_dev->glb_addr.ref_cnt != 0) { + tas_dev->glb_addr.ref_cnt = 0; + tas_dev->glb_addr.cur_book = -1; + } + client->addr = tas_dev->tasdevice[chn].dev_addr; + if (tas_dev->tasdevice[chn].cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, E=%d\n", + __func__, ret); + goto out; + } + tas_dev->tasdevice[chn].cur_book = book; + } + } else if (chn == tas_dev->ndev) { + int i = 0; + + if (tas_dev->glb_addr.ref_cnt == 0) + for (i = 0; i < tas_dev->ndev; i++) + tas_dev->tasdevice[i].cur_book = -1; + client->addr = tas_dev->glb_addr.dev_addr; + if (tas_dev->glb_addr.cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_PAGE, 0); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, E=%d\n", + __func__, ret); + goto out; + } + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, book%x, E=%d\n", + __func__, book, ret); + goto out; + } + tas_dev->glb_addr.cur_book = book; + } + + tas_dev->glb_addr.ref_cnt++; + } else + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + +out: + return ret; +} + +int tasdevice_dev_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int *val) +{ + int ret = 0; + + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), val); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", __func__, ret); + } else + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + +out: + return ret; +} + +int tasdevice_dev_write(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int value) +{ + int ret = 0; + + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); +out: + return ret; +} + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", __func__, + ret); + } else + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); +out: + return ret; +} + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + +out: + return ret; +} + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value) +{ + int ret = 0; + struct i2c_client *client = + (struct i2c_client *)tas_dev->client; + + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + client->addr = tas_dev->tasdevice[chn].dev_addr; + ret = regmap_update_bits(tas_dev->regmap, + TASDEVICE_PGRG(reg), mask, value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, E=%d\n", __func__, ret); + } else { + dev_err(tas_dev->dev, "%s, no such channel(%d)\n", + __func__, chn); + ret = -EINVAL; + } + +out: + return ret; +} + +static void tas2781_set_global_mode(struct tasdevice_priv *tas_dev) +{ + int i = 0; + int ret = 0; + + for (; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + TAS2871_MISC_CFG2, TAS2871_GLOBAL_ADDR_MASK, + TAS2871_GLOBAL_ADDR_ENABLE); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: chn %d set glb fail, %d\n", + __func__, i, ret); + continue; + } + } +} + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret, i; + + tas_dev->cur_prog = -1; + tas_dev->cur_conf = -1; + + for (i = 0; i < tas_dev->ndev; i++) { + tas_dev->tasdevice[i].cur_book = -1; + tas_dev->tasdevice[i].cur_prog = -1; + tas_dev->tasdevice[i].cur_conf = -1; + } + + if (tas_dev->glb_addr.dev_addr != 0 + && tas_dev->glb_addr.dev_addr < 0x7F) + tas_dev->set_global_mode = tas2781_set_global_mode; + dev_set_drvdata(tas_dev->dev, tas_dev); + + mutex_init(&tas_dev->codec_lock); + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:0x%08x\n", + __func__, ret); + goto out; + } + +out: + return ret; +} + +static void tasdevice_remove(struct tasdevice_priv *tas_dev) +{ + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) + gpio_free(tas_dev->irq_info.irq_gpio); + + mutex_destroy(&tas_dev->codec_lock); +} + +static int tasdevice_i2c_probe(struct i2c_client *i2c) +{ + const struct i2c_device_id *id = i2c_match_id(tasdevice_id, i2c); + const struct acpi_device_id *acpi_id; + struct tasdevice_priv *tas_dev; + int ret; + + tas_dev = devm_kzalloc(&i2c->dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) { + ret = -ENOMEM; + goto out; + } + + if (ACPI_HANDLE(&i2c->dev)) { + acpi_id = acpi_match_device(i2c->dev.driver->acpi_match_table, + &i2c->dev); + if (!acpi_id) { + dev_err(&i2c->dev, "No driver data\n"); + ret = -EINVAL; + goto out; + } + tas_dev->chip_id = acpi_id->driver_data; + tas_dev->isacpi = true; + } else { + tas_dev->chip_id = id ? id->driver_data : 0; + tas_dev->isacpi = false; + } + + tas_dev->dev = &i2c->dev; + tas_dev->client = (void *)i2c; + + ret = tasdevice_parse_dt(tas_dev); + + tas_dev->regmap = devm_regmap_init_i2c(i2c, + &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) { + ret = PTR_ERR(tas_dev->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + goto out; + } + ret = tasdevice_init(tas_dev); + +out: + if (ret < 0 && tas_dev) + tasdevice_remove(tas_dev); + return ret; + +} + +static void tasdevice_i2c_remove(struct i2c_client *client) +{ + struct tasdevice_priv *tas_dev = i2c_get_clientdata(client); + + tasdevice_remove(tas_dev); + +} + +#ifdef CONFIG_ACPI +static const struct acpi_device_id tasdevice_acpi_match[] = { + { "TAS2781", TAS2781 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, tasdevice_acpi_match); +#endif + +static struct i2c_driver tasdevice_i2c_driver = { + .driver = { + .name = "tas2781-codec", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tasdevice_of_match), + .acpi_match_table = ACPI_PTR(tasdevice_acpi_match), + }, + .probe = tasdevice_i2c_probe, + .remove = tasdevice_i2c_remove, + .id_table = tasdevice_id, +}; + +module_i2c_driver(tasdevice_i2c_driver); + +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_AUTHOR("Kevin Lu <kevin-lu(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2781 Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2781.h b/sound/soc/codecs/tas2781.h new file mode 100644 index 000000000000..d77ca85fc016 --- /dev/null +++ b/sound/soc/codecs/tas2781.h @@ -0,0 +1,160 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TAS2781_H__ +#define __TAS2781_H__ + +#include "tas2781-dsp.h" + +#define TAS2781_DRV_VER 1 /* version number */ +#define SMARTAMP_MODULE_NAME "tas2781" +#define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\ + SNDRV_PCM_RATE_88200) +#define TASDEVICE_MAX_CHANNELS 8 + +#define TASDEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/*PAGE Control Register (available in page0 of each book) */ +#define TASDEVICE_PAGE_SELECT 0x00 +#define TASDEVICE_BOOKCTL_PAGE 0x00 +#define TASDEVICE_BOOKCTL_REG 127 +#define TASDEVICE_BOOK_ID(reg) (reg / (256 * 128)) +#define TASDEVICE_PAGE_ID(reg) ((reg % (256 * 128)) / 128) +#define TASDEVICE_PAGE_REG(reg) ((reg % (256 * 128)) % 128) +#define TASDEVICE_PGRG(reg) ((reg % (256 * 128))) +#define TASDEVICE_REG(book, page, reg) (((book * 256 * 128) + \ + (page * 128)) + reg) + +/*Software Reset */ +#define TAS2871_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x02) +#define TAS2871_REG_SWRESET_RESET BIT(0) + +/* Enable Global addresses */ +#define TAS2871_MISC_CFG2 TASDEVICE_REG(0x0, 0X0, 0x07) +#define TAS2871_GLOBAL_ADDR_MASK BIT(1) +#define TAS2871_GLOBAL_ADDR_ENABLE BIT(1) + +/*I2C Checksum */ +#define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) + +/* Volume control */ +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) + +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + +enum audio_device { + TAS2781 = 0, +}; + +#define SMS_HTONS(a, b) ((((a)&0x00FF)<<8) | ((b)&0x00FF)) +#define SMS_HTONL(a, b, c, d) ((((a)&0x000000FF)<<24) | \ + (((b)&0x000000FF)<<16) | (((c)&0x000000FF)<<8) | \ + ((d)&0x000000FF)) + +struct tasdevice { + struct tasdevice_fw *cali_data_fmw; + unsigned int dev_addr; + unsigned int err_code; + unsigned char cur_book; + short cur_prog; + short cur_conf; + bool is_loading; + bool is_loaderr; + bool is_calibrated_data_loaded; +}; + +/* + * This item is used to store the generic i2c address of + * all the tas2781 devices for I2C broadcast during the multi-device + * writes, useless in mono case. + */ +struct global_addr { + unsigned int dev_addr; + unsigned char cur_book; + int ref_cnt; +}; + +struct tasdevice_irqinfo { + int irq_gpio; + int irq; +}; + +struct tasdevice_priv { + struct device *dev; + struct regmap *regmap; + struct mutex codec_lock; + struct gpio_desc *reset; + struct tasdevice tasdevice[max_chn]; + struct tasdevice_fw *fmw; + struct tasdevice_rca rcabin; + struct tasdevice_irqinfo irq_info; + struct global_addr glb_addr; + unsigned int chip_id; + unsigned int magic_num; + unsigned int sysclk; + unsigned char ndev; + unsigned char dev_name[32]; + unsigned char rca_binaryname[64]; + unsigned char coef_binaryname[64]; + unsigned char cal_binaryname[max_chn][64]; + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + void *client; + void *codec; + bool is_glb_calibrated_data_loaded; + bool isacpi; + int cur_prog; + int cur_conf; + int fw_state; + void (*set_global_mode)(struct tasdevice_priv *tas_dev); + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_dev, + const struct firmware *fmw, int offset); + int (*fw_parse_program_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*tasdevice_load_block)(struct tasdevice_priv *tas_dev, + struct tasdev_blk *pBlock); +}; + +int tasdevice_dev_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int *value); +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize); +int tasdevice_dev_write(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int value); + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned char *p_data, unsigned int n_length); + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned char *p_data, + unsigned int n_length); + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value); + +#endif /*__TAS2781_H__ */ -- 2.34.1

4 3

[PATCH] firmware: cs_dsp: Add a debugfs entry containing control details
by Richard Fitzgerald 25 Mar '23

25 Mar '23

From: Simon Trimmer <simont(a)opensource.cirrus.com> The file named 'controls' in the DSP's debugfs root contains a formatted table describing the controls defined within the loaded DSP firmware, it is of the form name: len region:offset addr fwname algid ctltype flags en dirty Where flags is represented as a character for each flag if set, or '-', enabled is whether the control is enabled or disabled and dirty is whether the control value is set in the cache but not the hardware. Signed-off-by: Simon Trimmer <simont(a)opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/firmware/cirrus/cs_dsp.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/firmware/cirrus/cs_dsp.c b/drivers/firmware/cirrus/cs_dsp.c index 513136a924cf..faa6402c344d 100644 --- a/drivers/firmware/cirrus/cs_dsp.c +++ b/drivers/firmware/cirrus/cs_dsp.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/moduleparam.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/vmalloc.h> @@ -457,6 +458,33 @@ static const struct { }, }; +static int cs_dsp_coeff_base_reg(struct cs_dsp_coeff_ctl *ctl, unsigned int *reg, + unsigned int off); + +static int cs_dsp_debugfs_read_controls_show(struct seq_file *s, void *ignored) +{ + struct cs_dsp *dsp = s->private; + struct cs_dsp_coeff_ctl *ctl; + unsigned int reg; + + list_for_each_entry(ctl, &dsp->ctl_list, list) { + cs_dsp_coeff_base_reg(ctl, &reg, 0); + seq_printf(s, "%22.*s: %#8lx %s:%08x %#8x %s %#8x %#4x %c%c%c%c %s %s\n", + ctl->subname_len, ctl->subname, ctl->len, + cs_dsp_mem_region_name(ctl->alg_region.type), + ctl->offset, reg, ctl->fw_name, ctl->alg_region.alg, ctl->type, + ctl->flags & WMFW_CTL_FLAG_VOLATILE ? 'V' : '-', + ctl->flags & WMFW_CTL_FLAG_SYS ? 'S' : '-', + ctl->flags & WMFW_CTL_FLAG_READABLE ? 'R' : '-', + ctl->flags & WMFW_CTL_FLAG_WRITEABLE ? 'W' : '-', + ctl->enabled ? "enabled" : "disabled", + ctl->set ? "dirty" : "clean"); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(cs_dsp_debugfs_read_controls); + /** * cs_dsp_init_debugfs() - Create and populate DSP representation in debugfs * @dsp: pointer to DSP structure @@ -479,6 +507,9 @@ void cs_dsp_init_debugfs(struct cs_dsp *dsp, struct dentry *debugfs_root) debugfs_create_file(cs_dsp_debugfs_fops[i].name, 0444, root, dsp, &cs_dsp_debugfs_fops[i].fops); + debugfs_create_file("controls", 0444, root, dsp, + &cs_dsp_debugfs_read_controls_fops); + dsp->debugfs_root = root; } EXPORT_SYMBOL_NS_GPL(cs_dsp_init_debugfs, FW_CS_DSP); -- 2.30.2

2 1

Re: [PATCH] firmware: cs_dsp: Add a debugfs entry containing control details
by kernel test robot 24 Mar '23

24 Mar '23

Hi Richard, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on linus/master] [also build test WARNING on v6.3-rc3 next-20230324] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Richard-Fitzgerald-via-Alsa-… patch link: https://lore.kernel.org/r/167967423036.26.11080959777905296733%40mailman-co… patch subject: [PATCH] firmware: cs_dsp: Add a debugfs entry containing control details config: powerpc-randconfig-r001-20230322 (https://download.01.org/0day-ci/archive/20230325/202303250526.oZMat3JD-lkp@…) compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project 67409911353323ca5edf2049ef0df54132fa1ca7) reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # install powerpc cross compiling tool for clang build # apt-get install binutils-powerpc-linux-gnu # https://github.com/intel-lab-lkp/linux/commit/2e31e4948e1f907f41ef4946c6f59… git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Richard-Fitzgerald-via-Alsa-devel/firmware-cs_dsp-Add-a-debugfs-entry-containing-control-details/20230325-001558 git checkout 2e31e4948e1f907f41ef4946c6f59426c2206b95 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=powerpc olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=powerpc SHELL=/bin/bash drivers/firmware/cirrus/ If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202303250526.oZMat3JD-lkp@intel.com/ All warnings (new ones prefixed by >>): ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET' __do_##name al; \ ^~~~~~~~~~~~~~ <scratch space>:77:1: note: expanded from here __do_insb ^ arch/powerpc/include/asm/io.h:577:56: note: expanded from macro '__do_insb' #define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) ~~~~~~~~~~~~~~~~~~~~~^ In file included from drivers/firmware/cirrus/cs_dsp.c:21: In file included from include/linux/firmware/cirrus/cs_dsp.h:18: In file included from include/linux/regmap.h:20: In file included from include/linux/iopoll.h:14: In file included from include/linux/io.h:13: In file included from arch/powerpc/include/asm/io.h:640: arch/powerpc/include/asm/io-defs.h:45:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET' __do_##name al; \ ^~~~~~~~~~~~~~ <scratch space>:79:1: note: expanded from here __do_insw ^ arch/powerpc/include/asm/io.h:578:56: note: expanded from macro '__do_insw' #define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) ~~~~~~~~~~~~~~~~~~~~~^ In file included from drivers/firmware/cirrus/cs_dsp.c:21: In file included from include/linux/firmware/cirrus/cs_dsp.h:18: In file included from include/linux/regmap.h:20: In file included from include/linux/iopoll.h:14: In file included from include/linux/io.h:13: In file included from arch/powerpc/include/asm/io.h:640: arch/powerpc/include/asm/io-defs.h:47:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET' __do_##name al; \ ^~~~~~~~~~~~~~ <scratch space>:81:1: note: expanded from here __do_insl ^ arch/powerpc/include/asm/io.h:579:56: note: expanded from macro '__do_insl' #define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) ~~~~~~~~~~~~~~~~~~~~~^ In file included from drivers/firmware/cirrus/cs_dsp.c:21: In file included from include/linux/firmware/cirrus/cs_dsp.h:18: In file included from include/linux/regmap.h:20: In file included from include/linux/iopoll.h:14: In file included from include/linux/io.h:13: In file included from arch/powerpc/include/asm/io.h:640: arch/powerpc/include/asm/io-defs.h:49:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET' __do_##name al; \ ^~~~~~~~~~~~~~ <scratch space>:83:1: note: expanded from here __do_outsb ^ arch/powerpc/include/asm/io.h:580:58: note: expanded from macro '__do_outsb' #define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) ~~~~~~~~~~~~~~~~~~~~~^ In file included from drivers/firmware/cirrus/cs_dsp.c:21: In file included from include/linux/firmware/cirrus/cs_dsp.h:18: In file included from include/linux/regmap.h:20: In file included from include/linux/iopoll.h:14: In file included from include/linux/io.h:13: In file included from arch/powerpc/include/asm/io.h:640: arch/powerpc/include/asm/io-defs.h:51:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET' __do_##name al; \ ^~~~~~~~~~~~~~ <scratch space>:85:1: note: expanded from here __do_outsw ^ arch/powerpc/include/asm/io.h:581:58: note: expanded from macro '__do_outsw' #define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) ~~~~~~~~~~~~~~~~~~~~~^ In file included from drivers/firmware/cirrus/cs_dsp.c:21: In file included from include/linux/firmware/cirrus/cs_dsp.h:18: In file included from include/linux/regmap.h:20: In file included from include/linux/iopoll.h:14: In file included from include/linux/io.h:13: In file included from arch/powerpc/include/asm/io.h:640: arch/powerpc/include/asm/io-defs.h:53:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET' __do_##name al; \ ^~~~~~~~~~~~~~ <scratch space>:87:1: note: expanded from here __do_outsl ^ arch/powerpc/include/asm/io.h:582:58: note: expanded from macro '__do_outsl' #define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) ~~~~~~~~~~~~~~~~~~~~~^ >> drivers/firmware/cirrus/cs_dsp.c:472:39: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat] ctl->subname_len, ctl->subname, ctl->len, ^~~~~~~~ 7 warnings generated. vim +472 drivers/firmware/cirrus/cs_dsp.c 459 460 static int cs_dsp_coeff_base_reg(struct cs_dsp_coeff_ctl *ctl, unsigned int *reg, 461 unsigned int off); 462 463 static int cs_dsp_debugfs_read_controls_show(struct seq_file *s, void *ignored) 464 { 465 struct cs_dsp *dsp = s->private; 466 struct cs_dsp_coeff_ctl *ctl; 467 unsigned int reg; 468 469 list_for_each_entry(ctl, &dsp->ctl_list, list) { 470 cs_dsp_coeff_base_reg(ctl, &reg, 0); 471 seq_printf(s, "%22.*s: %#8lx %s:%08x %#8x %s %#8x %#4x %c%c%c%c %s %s\n", > 472 ctl->subname_len, ctl->subname, ctl->len, 473 cs_dsp_mem_region_name(ctl->alg_region.type), 474 ctl->offset, reg, ctl->fw_name, ctl->alg_region.alg, ctl->type, 475 ctl->flags & WMFW_CTL_FLAG_VOLATILE ? 'V' : '-', 476 ctl->flags & WMFW_CTL_FLAG_SYS ? 'S' : '-', 477 ctl->flags & WMFW_CTL_FLAG_READABLE ? 'R' : '-', 478 ctl->flags & WMFW_CTL_FLAG_WRITEABLE ? 'W' : '-', 479 ctl->enabled ? "enabled" : "disabled", 480 ctl->set ? "dirty" : "clean"); 481 } 482 483 return 0; 484 } 485 DEFINE_SHOW_ATTRIBUTE(cs_dsp_debugfs_read_controls); 486 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests

1 0

alsactl: add fallback for loading driver state
by GitHub pull_request - edited 24 Mar '23

24 Mar '23

alsa-project/alsa-utils pull request #197 was edited from MrCry0: Support loading driver state from the vendor-specific pre-installed sound configuration file /usr/lib/alsa/asound.state. This commit unblocks changes in the `alsa-state` yocto recipe to install `asound.state` into `/usr/lib/alsa/`. This is a good move to support ostree distros and to keep an initial `asound.state` in a safe place. Request URL : https://github.com/alsa-project/alsa-utils/pull/197 Patch URL : https://github.com/alsa-project/alsa-utils/pull/197.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

alsactl: add fallback for loading driver state
by GitHub pull_request - opened 24 Mar '23

24 Mar '23

alsa-project/alsa-utils pull request #197 was opened from MrCry0: Support loading driver state from the vendor-specific pre-installed sound configuration file /usr/lib/alsa/asound.state. Request URL : https://github.com/alsa-project/alsa-utils/pull/197 Patch URL : https://github.com/alsa-project/alsa-utils/pull/197.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH next] ASoC: cs35l56: Remove redundant return statement in cs35l56_spi_probe()
by Harshit Mogalapalli 24 Mar '23

24 Mar '23

We have unreachable 'return ret' statement in cs35l56_spi_probe(), delete it as its dead code.. This is found by static analysis with smatch. Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli(a)oracle.com> --- Only compile tested. --- sound/soc/codecs/cs35l56-spi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/codecs/cs35l56-spi.c b/sound/soc/codecs/cs35l56-spi.c index 80dcf37daae2..4b2084e85f29 100644 --- a/sound/soc/codecs/cs35l56-spi.c +++ b/sound/soc/codecs/cs35l56-spi.c @@ -29,7 +29,6 @@ static int cs35l56_spi_probe(struct spi_device *spi) if (IS_ERR(cs35l56->regmap)) { ret = PTR_ERR(cs35l56->regmap); return dev_err_probe(&spi->dev, ret, "Failed to allocate register map\n"); - return ret; } cs35l56->dev = &spi->dev; -- 2.38.1

3 2

[RESEND PATCH] ASoC: soc-compress: Inherit atomicity from DAI link for Compress FE
by Daniel Baluta 24 Mar '23

24 Mar '23

From: Daniel Baluta <daniel.baluta(a)nxp.com> After commit bbf7d3b1c4f40 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE") BE and FE atomicity must match. In the case of Compress PCM there is a mismatch in atomicity between FE and BE and we get errors like this: [ 36.434566] sai1-wm8960-hifi: dpcm_be_connect: FE is atomic but BE is nonatomic, invalid configuration [ 36.444278] PCM Deep Buffer: ASoC: can't connect SAI1.OUT In order to fix this we must inherit the atomicity from DAI link associated with current PCM Compress FE. Fixes: bbf7d3b1c4f4 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE") Signed-off-by: Daniel Baluta <daniel.baluta(a)nxp.com> --- sound/soc/soc-compress.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index e7aa6f360cab..d649b0cf4744 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -622,6 +622,9 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num) return ret; } + /* inherit atomicity from DAI link */ + be_pcm->nonatomic = rtd->dai_link->nonatomic; + rtd->pcm = be_pcm; rtd->fe_compr = 1; if (rtd->dai_link->dpcm_playback) -- 2.25.1

3 2

[PATCH v2] ASoC: simple-card.c: add missing of_node_put()
by Kuninori Morimoto 24 Mar '23

24 Mar '23

It is missing of_node_put() for platform. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/generic/simple-card.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index fcd6c44f89f6..6f044cc8357e 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -422,6 +422,7 @@ static int __simple_for_each_link(struct asoc_simple_priv *priv, } of_node_put(codec); + of_node_put(plat); node = of_get_next_child(top, node); } while (!is_top && node); -- 2.25.1

2 1

[PATCH] ASoC: cs35l56: Fix an unsigned comparison which can never be negative
by Jiapeng Chong 24 Mar '23

24 Mar '23

The variable 'rv' is defined as unsigned type, so the following if statement is invalid, we can modify the type of rv to int. if (rv < 0) { dev_err(cs35l56->dev, "irq: failed to get pm_runtime: %d\n", rv); goto err_unlock; } ./sound/soc/codecs/cs35l56.c:333:5-7: WARNING: Unsigned expression compared with zero: rv < 0. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4599 Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> --- sound/soc/codecs/cs35l56.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index 90fc79b5666d..d97b465f0d3c 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -321,7 +321,9 @@ irqreturn_t cs35l56_irq(int irq, void *data) struct cs35l56_private *cs35l56 = data; unsigned int status1 = 0, status8 = 0, status20 = 0; unsigned int mask1, mask8, mask20; - unsigned int rv, val; + unsigned int val; + int rv; + irqreturn_t ret = IRQ_NONE; if (!cs35l56->init_done) -- 2.20.1.7.g153144c

3 2

[PATCH v6] ASoC: dt-bindings: Add tas2781 DT documenting that binding along with the driver
by Shenghao Ding 24 Mar '23

24 Mar '23

Create tas2781.yaml for tas2781 driver. Signed-off-by: Shenghao Ding <13916275206(a)139.com> --- Changes in v6: - Remove all the "|" after "description:". - Drop the reset-gpios description. - Be consistent on the I2C. Changes to be committed: new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml --- .../devicetree/bindings/sound/ti,tas2781.yaml | 84 +++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml new file mode 100644 index 000000000000..af37595f3a6e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TAS2781 SmartAMP + +maintainers: + - Shenghao Ding <shenghao-ding(a)ti.com> + - Kevin Lu <kevin-lu(a)ti.com> + +description: + The TAS2781 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. Integrated an on-chip DSP supports Texas Instruments + Smart Amp speaker protection algorithm. The integrated speaker + voltage and current sense provides for real time + monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2781 + + reg: + maxItems: 1 + description: + I2C address of the primary device. + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,audio-slots: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + description: + I2C address of the device for different audio slots, + useless in mono case. + + ti,broadcast-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Generic I2C address for all the tas2781 devices in + purpose of I2C broadcast during the multi-device + writes, useless in mono case. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + /* example with quad support, such as tablet or pad device */ + #address-cells = <1>; + #size-cells = <0>; + quad: codec@38 { + compatible = "ti,tas2781"; + reg = <0x38>; + #sound-dai-cells = <1>; + reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH >; + interrupt-parent = <&gpio1>; + interrupts = <15>; + ti,audio-slots = < 0x38 /* topleft-channel */ + 0x39 /* topright-channel */ + 0x3a /* bottomleft-channel */ + 0x3b /* bottomright-channel */ + >; + ti,broadcast-addr = <0x40>; + }; + }; +... -- 2.34.1

2 1

[PATCH] ALSA: usb-audio: Fix regression on detection of Roland VS-100
by Takashi Iwai 24 Mar '23

24 Mar '23

It's been reported that the recent kernel can't probe the PCM devices on Roland VS-100 properly, and it turned out to be a regression by the recent addition of the bit shift range check for the format bits. In the old code, we just did bit-shift and it resulted in zero, which is then corrected to the standard PCM format, while the new code explicitly returns an error in such a case. For addressing the regression, relax the check and fallback to the standard PCM type (with the info output). Fixes: 43d5ca88dfcd ("ALSA: usb-audio: Fix potential out-of-bounds shift") Cc: <stable(a)vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217084 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/format.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/usb/format.c b/sound/usb/format.c index 405dc0bf6678..4b1c5ba121f3 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -39,8 +39,12 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip, case UAC_VERSION_1: default: { struct uac_format_type_i_discrete_descriptor *fmt = _fmt; - if (format >= 64) - return 0; /* invalid format */ + if (format >= 64) { + usb_audio_info(chip, + "%u:%d: invalid format type 0x%llx is detected, processed as PCM\n", + fp->iface, fp->altsetting, format); + format = UAC_FORMAT_TYPE_I_PCM; + } sample_width = fmt->bBitResolution; sample_bytes = fmt->bSubframeSize; format = 1ULL << format; -- 2.35.3

1 0

[PATCH] ALSA: hdspm: remove unused copy_u32_le function
by Tom Rix 24 Mar '23

24 Mar '23

clang with W=1 reports sound/pci/rme9652/hdspm.c:6149:19: error: unused function 'copy_u32_le' [-Werror,-Wunused-function] static inline int copy_u32_le(void __user *dest, void __iomem *src) ^ This function is not used so remove it. Signed-off-by: Tom Rix <trix(a)redhat.com> --- sound/pci/rme9652/hdspm.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index fa1812e7a49d..267c7848974a 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -6146,12 +6146,6 @@ static int snd_hdspm_hwdep_dummy_op(struct snd_hwdep *hw, struct file *file) return 0; } -static inline int copy_u32_le(void __user *dest, void __iomem *src) -{ - u32 val = readl(src); - return copy_to_user(dest, &val, 4); -} - static int snd_hdspm_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigned int cmd, unsigned long arg) { -- 2.27.0

2 1

[PATCH] kselftest/alsa - pcm-test: Don't include diagnostic message in test name
by Mark Brown 24 Mar '23

24 Mar '23

When reporting errors or skips we currently include the diagnostic message indicating why we're failing or skipping. This isn't ideal since KTAP defines the entire print as the test name, so if there's an error then test systems won't detect the test as being the same one as a passing test. Move the diagnostic to a separate ksft_print_msg() to avoid this issue, the test name part will always be the same for passes, fails and skips and the diagnostic information is still displayed. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/alsa/pcm-test.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/alsa/pcm-test.c b/tools/testing/selftests/alsa/pcm-test.c index 58b525a4a32c..bab56ea67e89 100644 --- a/tools/testing/selftests/alsa/pcm-test.c +++ b/tools/testing/selftests/alsa/pcm-test.c @@ -489,17 +489,18 @@ static void test_pcm_time(struct pcm_data *data, enum test_class class, } if (!skip) - ksft_test_result(pass, "%s.%s.%d.%d.%d.%s%s%s\n", + ksft_test_result(pass, "%s.%s.%d.%d.%d.%s\n", test_class_name, test_name, data->card, data->device, data->subdevice, - snd_pcm_stream_name(data->stream), - msg[0] ? " " : "", msg); + snd_pcm_stream_name(data->stream)); else - ksft_test_result_skip("%s.%s.%d.%d.%d.%s%s%s\n", + ksft_test_result_skip("%s.%s.%d.%d.%d.%s\n", test_class_name, test_name, data->card, data->device, data->subdevice, - snd_pcm_stream_name(data->stream), - msg[0] ? " " : "", msg); + snd_pcm_stream_name(data->stream)); + + if (msg[0]) + ksft_print_msg("%s\n", msg); pthread_mutex_unlock(&results_lock); --- base-commit: e8d018dd0257f744ca50a729e3d042cf2ec9da65 change-id: 20230323-alsa-pcm-test-names-bcd31b586ca9 Best regards, -- Mark Brown <broonie(a)kernel.org>

2 1

[PATCH] kselftest/alsa - mixer-test: Log values associated with event issues
by Mark Brown 24 Mar '23

24 Mar '23

While it is common for driver bugs with events to apply to all events there are some issues which only trigger for specific values. Understanding these is easier if we know what we were trying to do when configuring the control so add logging for the specific values involved in the spurious event. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/alsa/mixer-test.c | 44 +++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index 05f1749ae19d..15d2ef8d4d27 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -445,6 +445,48 @@ static void test_ctl_name(struct ctl_data *ctl) ctl->card->card, ctl->elem); } +static void show_values(struct ctl_data *ctl, snd_ctl_elem_value_t *orig_val, + snd_ctl_elem_value_t *read_val) +{ + long long orig_int, read_int; + int i; + + for (i = 0; i < snd_ctl_elem_info_get_count(ctl->info); i++) { + switch (snd_ctl_elem_info_get_type(ctl->info)) { + case SND_CTL_ELEM_TYPE_BOOLEAN: + orig_int = snd_ctl_elem_value_get_boolean(orig_val, i); + read_int = snd_ctl_elem_value_get_boolean(read_val, i); + break; + + case SND_CTL_ELEM_TYPE_INTEGER: + orig_int = snd_ctl_elem_value_get_integer(orig_val, i); + read_int = snd_ctl_elem_value_get_integer(read_val, i); + break; + + case SND_CTL_ELEM_TYPE_INTEGER64: + orig_int = snd_ctl_elem_value_get_integer64(orig_val, + i); + read_int = snd_ctl_elem_value_get_integer64(read_val, + i); + break; + + case SND_CTL_ELEM_TYPE_ENUMERATED: + orig_int = snd_ctl_elem_value_get_enumerated(orig_val, + i); + read_int = snd_ctl_elem_value_get_enumerated(read_val, + i); + break; + + default: + return; + } + + ksft_print_msg("%s.%d orig %lld read %lld, is_volatile %d\n", + ctl->name, i, orig_int, read_int, + snd_ctl_elem_info_is_volatile(ctl->info)); + } +} + static bool show_mismatch(struct ctl_data *ctl, int index, snd_ctl_elem_value_t *read_val, snd_ctl_elem_value_t *expected_val) @@ -584,12 +626,14 @@ static int write_and_verify(struct ctl_data *ctl, if (err < 1) { ksft_print_msg("No event generated for %s\n", ctl->name); + show_values(ctl, initial_val, read_val); ctl->event_missing++; } } else { if (err != 0) { ksft_print_msg("Spurious event generated for %s\n", ctl->name); + show_values(ctl, initial_val, read_val); ctl->event_spurious++; } } --- base-commit: e8d018dd0257f744ca50a729e3d042cf2ec9da65 change-id: 20230322-alsa-mixer-event-values-7498bca29241 Best regards, -- Mark Brown <broonie(a)kernel.org>

2 1

Thinkpad Mute LED not working until Restore + Uninstall
by GitHub issues - opened 23 Mar '23

23 Mar '23

alsa-project/alsa-utils issue #196 was opened from alosarjos: Hi there! I'm using a ThinkPad T14 Gen 3 (AMD) laptop. It has a led on the F4 key for muting the microphone and a LED indicating if the mute is enabled or not. Now, the strange thing is that the only way I've found to make it start working is by: 1. Run `alsactl restore` 2. Uninstall `alsa-utils` It won't start working until I uninstall the `alsa-utils` package. I'm not sure this is the correct place to report the issue, but since the `alsa-utils` package removal is making it work again I'm hoping to get some guidance. My OS stack is: - Arch Linux - Linux 6.2.7 - Pipewire 0.3.67 Thanks a lot :D Issue URL : https://github.com/alsa-project/alsa-utils/issues/196 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH V2 1/2] ASoC: max98363: add soundwire amplifier driver
by “Ryan 23 Mar '23

23 Mar '23

From: Ryan Lee <ryans.lee(a)analog.com> Added Analog Devices MAX98363 SoundWire Amplifier Driver. The MAX98363 is a SoundWire peripheral device that supports MIPI SoundWire v1.2-compatible digital interface for audio and control data. Signed-off-by: Ryan Lee <ryans.lee(a)analog.com> --- Changes from v1: Removed the standard SoundWire registers from the amp register table. Removed .of_match_table and .acpi_match_table. Removed vdd/dvddio control. Removed unnecessary source port control in .read_prop. Removed legacy from I2S driver not used for SoundWire driver. Removed .shutdown, .bus_config, and unused functions. Sorted include files in alphabetical order. sound/soc/codecs/Kconfig | 11 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98363.c | 468 ++++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98363.h | 38 +++ 4 files changed, 519 insertions(+) create mode 100644 sound/soc/codecs/max98363.c create mode 100644 sound/soc/codecs/max98363.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index bd72c426a93d..342e43844af0 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -130,6 +130,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98925 imply SND_SOC_MAX98926 imply SND_SOC_MAX98927 + imply SND_SOC_MAX98363 imply SND_SOC_MAX98373_I2C imply SND_SOC_MAX98373_SDW imply SND_SOC_MAX98390 @@ -1089,6 +1090,16 @@ config SND_SOC_MAX98520 To compile this driver as a module, choose M here. +config SND_SOC_MAX98363 + tristate "Analog Devices MAX98363 Soundwire Speaker Amplifier" + depends on SOUNDWIRE + select REGMAP_SOUNDWIRE + help + Enable support for Analog Devices MAX98363 Soundwire + amplifier. MAX98363 supports the MIPI SoundWire v1.2 + compatible interface for audio and control data. + This amplifier does not support I2C and I2S. + config SND_SOC_MAX98373 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f1ca18f7946c..791a425bf38f 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -143,6 +143,7 @@ snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o snd-soc-max98520-objs := max98520.o +snd-soc-max98363-objs := max98363.o snd-soc-max98373-objs := max98373.o snd-soc-max98373-i2c-objs := max98373-i2c.o snd-soc-max98373-sdw-objs := max98373-sdw.o @@ -505,6 +506,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o obj-$(CONFIG_SND_SOC_MAX98520) += snd-soc-max98520.o +obj-$(CONFIG_SND_SOC_MAX98363) += snd-soc-max98363.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o obj-$(CONFIG_SND_SOC_MAX98373_I2C) += snd-soc-max98373-i2c.o obj-$(CONFIG_SND_SOC_MAX98373_SDW) += snd-soc-max98373-sdw.o diff --git a/sound/soc/codecs/max98363.c b/sound/soc/codecs/max98363.c new file mode 100644 index 000000000000..69d66af4fb36 --- /dev/null +++ b/sound/soc/codecs/max98363.c @@ -0,0 +1,468 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2022, Analog Devices Inc. + +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "max98363.h" + +static struct reg_default max98363_reg[] = { + {MAX98363_R2001_INTR_RAW, 0x0}, + {MAX98363_R2003_INTR_STATE, 0x0}, + {MAX98363_R2005_INTR_FALG, 0x0}, + {MAX98363_R2007_INTR_EN, 0x0}, + {MAX98363_R2009_INTR_CLR, 0x0}, + {MAX98363_R2021_ERR_MON_CTRL, 0x0}, + {MAX98363_R2022_SPK_MON_THRESH, 0x0}, + {MAX98363_R2023_SPK_MON_DURATION, 0x0}, + {MAX98363_R2030_TONE_GEN_CFG, 0x0}, + {MAX98363_R203F_TONE_GEN_EN, 0x0}, + {MAX98363_R2040_AMP_VOL, 0x0}, + {MAX98363_R2041_AMP_GAIN, 0x5}, + {MAX98363_R2042_DSP_CFG, 0x0}, + {MAX98363_R21FF_REV_ID, 0x0}, +}; + +static bool max98363_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98363_R2001_INTR_RAW: + case MAX98363_R2003_INTR_STATE: + case MAX98363_R2005_INTR_FALG: + case MAX98363_R2007_INTR_EN: + case MAX98363_R2009_INTR_CLR: + case MAX98363_R2021_ERR_MON_CTRL ... MAX98363_R2023_SPK_MON_DURATION: + case MAX98363_R2030_TONE_GEN_CFG: + case MAX98363_R203F_TONE_GEN_EN: + case MAX98363_R2040_AMP_VOL: + case MAX98363_R2041_AMP_GAIN: + case MAX98363_R2042_DSP_CFG: + case MAX98363_R21FF_REV_ID: + return true; + default: + return false; + } +}; + +static bool max98363_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98363_R2001_INTR_RAW: + case MAX98363_R2003_INTR_STATE: + case MAX98363_R2005_INTR_FALG: + case MAX98363_R2007_INTR_EN: + case MAX98363_R2009_INTR_CLR: + case MAX98363_R21FF_REV_ID: + return true; + default: + return false; + } +} + +static const struct regmap_config max98363_sdw_regmap = { + .reg_bits = 32, + .val_bits = 8, + .max_register = MAX98363_R21FF_REV_ID, + .reg_defaults = max98363_reg, + .num_reg_defaults = ARRAY_SIZE(max98363_reg), + .readable_reg = max98363_readable_register, + .volatile_reg = max98363_volatile_reg, + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static int max98363_suspend(struct device *dev) +{ + struct max98363_priv *max98363 = dev_get_drvdata(dev); + + regcache_cache_only(max98363->regmap, true); + regcache_mark_dirty(max98363->regmap); + + return 0; +} + +#define MAX98363_PROBE_TIMEOUT 5000 + +static int max98363_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct max98363_priv *max98363 = dev_get_drvdata(dev); + unsigned long time; + + if (!max98363->first_hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(MAX98363_PROBE_TIMEOUT)); + if (!time) { + dev_err(dev, "Initialization not complete, timed out\n"); + return -ETIMEDOUT; + } + +regmap_sync: + + slave->unattach_request = 0; + regcache_cache_only(max98363->regmap, false); + regcache_sync(max98363->regmap); + + return 0; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(max98363_pm, max98363_suspend, max98363_resume, NULL); + +static int max98363_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + int nval, i; + u32 bit; + unsigned long addr; + struct sdw_dpn_prop *dpn; + + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + + /* BITMAP: 00000010 Dataport 1 is active */ + prop->sink_ports = BIT(1); + prop->paging_support = true; + prop->clk_stop_timeout = 20; + prop->simple_clk_stop_capable = true; + prop->clock_reg_supported = true; + + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), + GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + return 0; +} + +static int max98363_io_init(struct sdw_slave *slave) +{ + struct device *dev = &slave->dev; + struct max98363_priv *max98363 = dev_get_drvdata(dev); + int ret, reg; + + if (max98363->first_hw_init) { + regcache_cache_only(max98363->regmap, false); + regcache_cache_bypass(max98363->regmap, true); + } + + /* + * PM runtime is only enabled when a Slave reports as Attached + */ + if (!max98363->first_hw_init) { + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(dev, 3000); + pm_runtime_use_autosuspend(dev); + + /* update count of parent 'active' children */ + pm_runtime_set_active(dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(dev); + + pm_runtime_enable(dev); + } + + pm_runtime_get_noresume(dev); + + ret = regmap_read(max98363->regmap, MAX98363_R21FF_REV_ID, &reg); + if (!ret) { + dev_info(dev, "Revision ID: %X\n", reg); + return ret; + } + + if (max98363->first_hw_init) { + regcache_cache_bypass(max98363->regmap, false); + regcache_mark_dirty(max98363->regmap); + } + + max98363->first_hw_init = true; + max98363->hw_init = true; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return 0; +} + +#define MAX98363_RATES SNDRV_PCM_RATE_8000_192000 +#define MAX98363_FORMATS (SNDRV_PCM_FMTBIT_S32_LE) + +static int max98363_sdw_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct max98363_priv *max98363 = + snd_soc_component_get_drvdata(component); + + struct sdw_stream_config stream_config; + struct sdw_port_config port_config; + enum sdw_data_direction direction; + struct sdw_stream_runtime *stream; + int ret; + + stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!stream) + return -EINVAL; + + if (!max98363->slave) + return -EINVAL; + + if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) + return -EINVAL; + + direction = SDW_DATA_DIR_RX; + port_config.num = 1; + + stream_config.frame_rate = params_rate(params); + stream_config.bps = snd_pcm_format_width(params_format(params)); + stream_config.direction = direction; + + if (max98363->slot) { + stream_config.ch_count = max98363->slot; + port_config.ch_mask = max98363->rx_mask; + } else { + stream_config.ch_count = params_channels(params); + port_config.ch_mask = GENMASK((int)stream_config.ch_count - 1, 0); + } + + ret = sdw_stream_add_slave(max98363->slave, &stream_config, + &port_config, 1, stream); + if (ret) { + dev_err(dai->dev, "Unable to configure port\n"); + return ret; + } + + if (params_channels(params) > 16) { + dev_err(component->dev, "Unsupported channels %d\n", + params_channels(params)); + return -EINVAL; + } + + dev_dbg(component->dev, "Format supported %d", params_format(params)); + + return 0; +} + +static int max98363_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct max98363_priv *max98363 = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!max98363->slave) + return -EINVAL; + + sdw_stream_remove_slave(max98363->slave, stream); + + return 0; +} + +static int max98363_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, int direction) +{ + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static const struct snd_soc_dai_ops max98363_dai_sdw_ops = { + .hw_params = max98363_sdw_dai_hw_params, + .hw_free = max98363_pcm_hw_free, + .set_stream = max98363_set_sdw_stream, +}; + +static struct snd_soc_dai_driver max98363_dai[] = { + { + .name = "max98363-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98363_RATES, + .formats = MAX98363_FORMATS, + }, + .ops = &max98363_dai_sdw_ops, + } +}; + +static int max98363_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct max98363_priv *max98363 = dev_get_drvdata(&slave->dev); + + if (status == SDW_SLAVE_UNATTACHED) + max98363->hw_init = false; + + /* + * Perform initialization only if slave status is SDW_SLAVE_ATTACHED + */ + if (max98363->hw_init || status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return max98363_io_init(slave); +} + +static struct sdw_slave_ops max98363_slave_ops = { + .read_prop = max98363_read_prop, + .update_status = max98363_update_status, +}; + +static DECLARE_TLV_DB_SCALE(max98363_digital_tlv, -6350, 50, 1); +static const DECLARE_TLV_DB_RANGE(max98363_spk_tlv, + 0, 5, TLV_DB_SCALE_ITEM(-300, 300, 0), +); + +static const char * const max98363_tone_cfg_text[] = { + "Reserved", "0", "+FS/2", "-FS/2", "1KHz", + "12KHz", "8KHz", "6KHz", "4KHz", "3KHz", + "2KHz", "1.5KHz", "Reserved", "500Hz", "250Hz" +}; + +static SOC_ENUM_SINGLE_DECL(max98363_tone_cfg_enum, + MAX98363_R2030_TONE_GEN_CFG, 0, + max98363_tone_cfg_text); + +static const char * const max98363_spkmon_duration_text[] = { + "8ms", "20ms", "40ms", "60ms", + "80ms", "160ms", "240ms", "320ms", + "400ms", "480ms", "560ms", "640ms", + "720ms", "800ms", "880ms", "960ms" +}; + +static SOC_ENUM_SINGLE_DECL(max98363_spkmon_duration_enum, + MAX98363_R2023_SPK_MON_DURATION, 0, + max98363_spkmon_duration_text); + +static const struct snd_kcontrol_new max98363_snd_controls[] = { + SOC_SINGLE_TLV("Digital Volume", MAX98363_R2040_AMP_VOL, + 0, 0x7F, 1, max98363_digital_tlv), + SOC_SINGLE_TLV("Speaker Volume", MAX98363_R2041_AMP_GAIN, + 0, 10, 0, max98363_spk_tlv), + SOC_SINGLE("Tone Generator Switch", MAX98363_R203F_TONE_GEN_EN, + 0, 1, 0), + SOC_ENUM("Tone Config", max98363_tone_cfg_enum), + SOC_SINGLE("Ramp Switch", MAX98363_R2042_DSP_CFG, + MAX98363_AMP_DSP_CFG_RMP_SHIFT, 1, 0), + SOC_SINGLE("CLK Monitor Switch", MAX98363_R2021_ERR_MON_CTRL, + MAX98363_CLOCK_MON_SHIFT, 1, 0), + SOC_SINGLE("SPKMON Monitor Switch", MAX98363_R2021_ERR_MON_CTRL, + MAX98363_SPKMON_SHIFT, 1, 0), + SOC_SINGLE("SPKMON Thresh", MAX98363_R2022_SPK_MON_THRESH, 0, 0xFF, 0), + SOC_ENUM("SPKMON Duration", max98363_spkmon_duration_enum), +}; + +static const struct snd_soc_dapm_widget max98363_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("AIFIN", "HiFi Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static const struct snd_soc_dapm_route max98363_audio_map[] = { + /* Plabyack */ + {"BE_OUT", NULL, "AIFIN"}, +}; + +const struct snd_soc_component_driver soc_codec_dev_max98363 = { + .controls = max98363_snd_controls, + .num_controls = ARRAY_SIZE(max98363_snd_controls), + .dapm_widgets = max98363_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98363_dapm_widgets), + .dapm_routes = max98363_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98363_audio_map), + .use_pmdown_time = 1, + .endianness = 1, +}; + +static int max98363_init(struct sdw_slave *slave, struct regmap *regmap) +{ + struct max98363_priv *max98363; + int ret; + struct device *dev = &slave->dev; + + /* Allocate and assign private driver data structure */ + max98363 = devm_kzalloc(dev, sizeof(*max98363), GFP_KERNEL); + if (!max98363) + return -ENOMEM; + + dev_set_drvdata(dev, max98363); + max98363->regmap = regmap; + max98363->slave = slave; + + max98363->hw_init = false; + max98363->first_hw_init = false; + + /* codec registration */ + ret = devm_snd_soc_register_component(dev, &soc_codec_dev_max98363, + max98363_dai, + ARRAY_SIZE(max98363_dai)); + if (ret < 0) + dev_err(dev, "Failed to register codec: %d\n", ret); + + return ret; +} + +static int max98363_sdw_probe(struct sdw_slave *slave, + const struct sdw_device_id *id) +{ + struct regmap *regmap; + + /* Regmap Initialization */ + regmap = devm_regmap_init_sdw(slave, &max98363_sdw_regmap); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return max98363_init(slave, regmap); +} + +static const struct sdw_device_id max98363_id[] = { + SDW_SLAVE_ENTRY(0x019F, 0x8363, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, max98363_id); + +static struct sdw_driver max98363_sdw_driver = { + .driver = { + .name = "max98363", + .pm = pm_ptr(&max98363_pm), + }, + .probe = max98363_sdw_probe, + .ops = &max98363_slave_ops, + .id_table = max98363_id, +}; + +module_sdw_driver(max98363_sdw_driver); + +MODULE_DESCRIPTION("ASoC MAX98363 driver SDW"); +MODULE_AUTHOR("Ryan Lee <ryans.lee(a)analog.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/max98363.h b/sound/soc/codecs/max98363.h new file mode 100644 index 000000000000..f2703fcb6335 --- /dev/null +++ b/sound/soc/codecs/max98363.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2022 Analog Devices Inc. */ + +#ifndef _MAX98363_H +#define _MAX98363_H + +#define MAX98363_R2000_SW_RESET 0x2000 +#define MAX98363_R2001_INTR_RAW 0x2001 +#define MAX98363_R2003_INTR_STATE 0x2003 +#define MAX98363_R2005_INTR_FALG 0x2005 +#define MAX98363_R2007_INTR_EN 0x2007 +#define MAX98363_R2009_INTR_CLR 0x2009 +#define MAX98363_R2021_ERR_MON_CTRL 0x2021 +#define MAX98363_R2022_SPK_MON_THRESH 0x2022 +#define MAX98363_R2023_SPK_MON_DURATION 0x2023 +#define MAX98363_R2030_TONE_GEN_CFG 0x2030 +#define MAX98363_R203F_TONE_GEN_EN 0x203F +#define MAX98363_R2040_AMP_VOL 0x2040 +#define MAX98363_R2041_AMP_GAIN 0x2041 +#define MAX98363_R2042_DSP_CFG 0x2042 +#define MAX98363_R21FF_REV_ID 0x21FF + +/* MAX98363_R2021_ERR_MON_CTRL */ +#define MAX98363_SPKMON_SHIFT (3) +#define MAX98363_CLOCK_MON_SHIFT (0) + +/* MAX98363_R2042_DSP_CFG */ +#define MAX98363_AMP_DSP_CFG_RMP_SHIFT (3) + +struct max98363_priv { + struct regmap *regmap; + struct sdw_slave *slave; + int slot; + unsigned int rx_mask; + bool hw_init; + bool first_hw_init; +}; +#endif -- 2.34.1

4 5

[PATCH] ASoC: dt-bindings: ak5558: Convert to dtschema
by Saalim Quadri 23 Mar '23

23 Mar '23

Convert the AK5558 ADC audio codec bindings to DT schema. Signed-off-by: Saalim Quadri <danascape(a)gmail.com> --- .../devicetree/bindings/sound/ak5558.txt | 24 --------- .../devicetree/bindings/sound/ak5558.yaml | 49 +++++++++++++++++++ 2 files changed, 49 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt create mode 100644 Documentation/devicetree/bindings/sound/ak5558.yaml diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt deleted file mode 100644 index e28708db6686..000000000000 --- a/Documentation/devicetree/bindings/sound/ak5558.txt +++ /dev/null @@ -1,24 +0,0 @@ -AK5558 8 channel differential 32-bit delta-sigma ADC - -This device supports I2C mode only. - -Required properties: - -- compatible : "asahi-kasei,ak5558" or "asahi-kasei,ak5552". -- reg : The I2C address of the device. - -Optional properties: - -- reset-gpios: A GPIO specifier for the power down & reset pin. -- AVDD-supply: Analog power supply -- DVDD-supply: Digital power supply - -Example: - -&i2c { - ak5558: adc@10 { - compatible = "asahi-kasei,ak5558"; - reg = <0x10>; - reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/ak5558.yaml b/Documentation/devicetree/bindings/sound/ak5558.yaml new file mode 100644 index 000000000000..90fd734daeec --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak5558.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ak5558.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AK5558 ADC Device Tree Bindings + +maintainers: + - Junichi Wakasugi <wakasugi.jb(a)om.asahi-kasei.co.jp> + - Mihai Serban <mihai.serban(a)nxp.com> + +properties: + compatible: + enum: + - asahi-kasei,ak5558 + - asahi-kasei,ak5552 + + reg: + maxItems: 1 + description: I2C address of the device. + + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.2V supply that powers up the DVDD pin. + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + ak5558: codec@10 { + compatible = "asahi-kasei,ak5558"; + reg = <0x10>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + }; -- 2.34.1

3 4

[RESEND PATCH] ASoC: codecs: lpass: fix the order or clks turn off during suspend
by Srinivas Kandagatla 23 Mar '23

23 Mar '23

The order in which clocks are stopped matters as some of the clock like NPL are derived from MCLK. Without this patch, Dragonboard RB5 DSP would crash with below error: qcom_q6v5_pas 17300000.remoteproc: fatal error received: ABT_dal.c:278:ABTimeout: AHB Bus hang is detected, Number of bus hang detected := 2 , addr0 = 0x3370000 , addr1 = 0x0!!! Turn off fsgen first, followed by npl and then finally mclk, which is exactly the opposite order of enable sequence. Fixes: 1dc3459009c3 ("ASoC: codecs: lpass: register mclk after runtime pm") Reported-by: Amit Pundir <amit.pundir(a)linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- Sorry for noise, resending this one, as I missed the asoc mailing list in my previous send. sound/soc/codecs/lpass-rx-macro.c | 4 ++-- sound/soc/codecs/lpass-tx-macro.c | 4 ++-- sound/soc/codecs/lpass-wsa-macro.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c index 9e0a4e8a46c3..372bea8b3525 100644 --- a/sound/soc/codecs/lpass-rx-macro.c +++ b/sound/soc/codecs/lpass-rx-macro.c @@ -3668,9 +3668,9 @@ static int __maybe_unused rx_macro_runtime_suspend(struct device *dev) regcache_cache_only(rx->regmap, true); regcache_mark_dirty(rx->regmap); - clk_disable_unprepare(rx->mclk); - clk_disable_unprepare(rx->npl); clk_disable_unprepare(rx->fsgen); + clk_disable_unprepare(rx->npl); + clk_disable_unprepare(rx->mclk); return 0; } diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index b044c9c6f89b..d9318799f6b7 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -2096,9 +2096,9 @@ static int __maybe_unused tx_macro_runtime_suspend(struct device *dev) regcache_cache_only(tx->regmap, true); regcache_mark_dirty(tx->regmap); - clk_disable_unprepare(tx->mclk); - clk_disable_unprepare(tx->npl); clk_disable_unprepare(tx->fsgen); + clk_disable_unprepare(tx->npl); + clk_disable_unprepare(tx->mclk); return 0; } diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c index 728f26d12ab0..6484c335bd5d 100644 --- a/sound/soc/codecs/lpass-wsa-macro.c +++ b/sound/soc/codecs/lpass-wsa-macro.c @@ -2504,9 +2504,9 @@ static int __maybe_unused wsa_macro_runtime_suspend(struct device *dev) regcache_cache_only(wsa->regmap, true); regcache_mark_dirty(wsa->regmap); - clk_disable_unprepare(wsa->mclk); - clk_disable_unprepare(wsa->npl); clk_disable_unprepare(wsa->fsgen); + clk_disable_unprepare(wsa->npl); + clk_disable_unprepare(wsa->mclk); return 0; } -- 2.21.0

3 2

[bug report] ASoC: qcom: audioreach: fix ADSP ready check
by Dan Carpenter 23 Mar '23

23 Mar '23

Hello Srinivas Kandagatla, The patch dd33c2e7b21d: "ASoC: qcom: audioreach: fix ADSP ready check" from Feb 9, 2023, leads to the following Smatch static checker warning: sound/soc/qcom/qdsp6/q6apm.c:167 q6apm_is_adsp_ready() warn: signedness bug returning '(-12)' sound/soc/qcom/qdsp6/q6apm.c 164 bool q6apm_is_adsp_ready(void) 165 { 166 if (g_apm) --> 167 return q6apm_get_apm_state(g_apm); ^^^^^^^^^^^^^^^^^^^ This can return negative error codes on allocation failure. 168 169 return false; 170 } regards, dan carpenter

1 0

[RESEND PATCH v2] ASoC: dt-bindings: wlf,wm8994: Convert to dtschema
by Krzysztof Kozlowski 23 Mar '23

23 Mar '23

Convert the Wolfson WM1811/WM8994/WM8958 audio codecs bindings to DT schema. Changes against original binding: 1. Add missing LDO1VDD-supply and LDO2VDD-supply. 2. Use "gpios" suffix for wlf,ldo1ena and wlf,ldo2ena (Linux kernel's gpiolib already looks for both variants). 3. Do not require AVDD1-supply and DCVDD-supply, because at least on Arndale board with Exynos5250 these are being supplied by internal LDOs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Reviewed-by: Rob Herring <robh(a)kernel.org> --- Changes since v1: 1. Add LDO2VDD-supply. 2. Do not require AVDD1-supply on WM8994. 3. Move requiring of common supplies to top-level "required:". 4. Add Rb tag. DTS is being corrected here: https://lore.kernel.org/linux-samsung-soc/20230208172634.404452-1-krzysztof… --- .../devicetree/bindings/sound/wlf,wm8994.yaml | 194 ++++++++++++++++++ .../devicetree/bindings/sound/wm8994.txt | 112 ---------- 2 files changed, 194 insertions(+), 112 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8994.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8994.txt diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml new file mode 100644 index 000000000000..8f045de02850 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8994.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM1811/WM8994/WM8958 audio codecs + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> + - patches(a)opensource.cirrus.com + +description: | + These devices support both I2C and SPI (configured with pin strapping on the + board). + + Pins on the device (for linking into audio routes): + IN1LN, IN1LP, IN2LN, IN2LP:VXRN, IN1RN, IN1RP, IN2RN, IN2RP:VXRP, SPKOUTLP, + SPKOUTLN, SPKOUTRP, SPKOUTRN, HPOUT1L, HPOUT1R, HPOUT2P, HPOUT2N, LINEOUT1P, + LINEOUT1N, LINEOUT2P, LINEOUT2N. + +properties: + compatible: + enum: + - wlf,wm1811 + - wlf,wm8994 + - wlf,wm8958 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: MCLK1 + - const: MCLK2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: + The first cell is the IRQ number. The second cell is the flags, encoded + as the trigger masks. + + AVDD1-supply: true + AVDD2-supply: true + CPVDD-supply: true + DBVDD-supply: true + DBVDD1-supply: true + DBVDD2-supply: true + DBVDD3-supply: true + DCVDD-supply: true + LDO1VDD-supply: true + LDO2VDD-supply: true + SPKVDD1-supply: true + SPKVDD2-supply: true + + '#sound-dai-cells': + const: 0 + + wlf,gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 11 + description: + A list of GPIO configuration register values. If absent, no configuration + of these registers is performed. If any value is over 0xffff then the + register will be left as default. If present 11 values must be supplied. + + wlf,micbias-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: + Two MICBIAS register values for WM1811 or WM8958. If absent the register + defaults will be used. + + wlf,ldo1ena-gpios: + maxItems: 1 + description: + Control of LDO1ENA input to device. + + wlf,ldo2ena-gpios: + maxItems: 1 + description: + Control of LDO2ENA input to device. + + wlf,lineout1-se: + type: boolean + description: + LINEOUT1 is in single ended mode. + + wlf,lineout2-se: + type: boolean + description: + INEOUT2 is in single ended mode. + + wlf,lineout1-feedback: + type: boolean + description: + LINEOUT1 has common mode feedback connected. + + wlf,lineout2-feedback: + type: boolean + description: + LINEOUT2 has common mode feedback connected. + + wlf,ldoena-always-driven: + type: boolean + description: + LDOENA is always driven. + + wlf,spkmode-pu: + type: boolean + description: + Enable the internal pull-up resistor on the SPKMODE pin. + + wlf,csnaddr-pd: + type: boolean + description: + Enable the internal pull-down resistor on the CS/ADDR pin. + +required: + - compatible + - reg + - AVDD2-supply + - CPVDD-supply + - SPKVDD1-supply + - SPKVDD2-supply + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + enum: + - wlf,wm1811 + - wlf,wm8958 + then: + properties: + DBVDD-supply: false + LDO2VDD-supply: false + required: + - DBVDD1-supply + - DBVDD2-supply + - DBVDD3-supply + else: + properties: + DBVDD1-supply: false + DBVDD2-supply: false + DBVDD3-supply: false + required: + - DBVDD-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&i2s0 0>; + clock-names = "MCLK1"; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt deleted file mode 100644 index 8fa947509c10..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ /dev/null @@ -1,112 +0,0 @@ -WM1811/WM8994/WM8958 audio CODEC - -These devices support both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : One of "wlf,wm1811", "wlf,wm8994" or "wlf,wm8958". - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - - - gpio-controller : Indicates this device is a GPIO controller. - - #gpio-cells : Must be 2. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - - - power supplies for the device, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt, depending - on compatible: - - for wlf,wm1811 and wlf,wm8958: - AVDD1-supply, AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, - DCVDD-supply, CPVDD-supply, SPKVDD1-supply, SPKVDD2-supply - - for wlf,wm8994: - AVDD1-supply, AVDD2-supply, DBVDD-supply, DCVDD-supply, CPVDD-supply, - SPKVDD1-supply, SPKVDD2-supply - -Optional properties: - - - interrupts : The interrupt line the IRQ signal for the device is - connected to. This is optional, if it is not connected then none - of the interrupt related properties should be specified. - - interrupt-controller : These devices contain interrupt controllers - and may provide interrupt services to other devices if they have an - interrupt line connected. - - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - - clocks : A list of up to two phandle and clock specifier pairs - - clock-names : A list of clock names sorted in the same order as clocks. - Valid clock names are "MCLK1" and "MCLK2". - - - wlf,gpio-cfg : A list of GPIO configuration register values. If absent, - no configuration of these registers is performed. If any value is - over 0xffff then the register will be left as default. If present 11 - values must be supplied. - - - wlf,micbias-cfg : Two MICBIAS register values for WM1811 or - WM8958. If absent the register defaults will be used. - - - wlf,ldo1ena : GPIO specifier for control of LDO1ENA input to device. - - wlf,ldo2ena : GPIO specifier for control of LDO2ENA input to device. - - - wlf,lineout1-se : If present LINEOUT1 is in single ended mode. - - wlf,lineout2-se : If present LINEOUT2 is in single ended mode. - - - wlf,lineout1-feedback : If present LINEOUT1 has common mode feedback - connected. - - wlf,lineout2-feedback : If present LINEOUT2 has common mode feedback - connected. - - - wlf,ldoena-always-driven : If present LDOENA is always driven. - - - wlf,spkmode-pu : If present enable the internal pull-up resistor on - the SPKMODE pin. - - - wlf,csnaddr-pd : If present enable the internal pull-down resistor on - the CS/ADDR pin. - -Pins on the device (for linking into audio routes): - - * IN1LN - * IN1LP - * IN2LN - * IN2LP:VXRN - * IN1RN - * IN1RP - * IN2RN - * IN2RP:VXRP - * SPKOUTLP - * SPKOUTLN - * SPKOUTRP - * SPKOUTRN - * HPOUT1L - * HPOUT1R - * HPOUT2P - * HPOUT2N - * LINEOUT1P - * LINEOUT1N - * LINEOUT2P - * LINEOUT2N - -Example: - -wm8994: codec@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; - - gpio-controller; - #gpio-cells = <2>; - - lineout1-se; - - AVDD1-supply = <&regulator>; - AVDD2-supply = <&regulator>; - CPVDD-supply = <&regulator>; - DBVDD-supply = <&regulator>; - DCVDD-supply = <&regulator>; - SPKVDD1-supply = <&regulator>; - SPKVDD2-supply = <&regulator>; -}; -- 2.34.1

3 2

[PATCH][next] ASoC: SOF: ipc4/intel: Fix spelling mistake "schduler" -> "scheduler"
by Colin Ian King 23 Mar '23

23 Mar '23

There are two spelling mistakes in dev_warn messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- sound/soc/sof/ipc4-topology.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 12775fcb6b54..de7213237b27 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -1990,7 +1990,7 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget pipeline = swidget->private; if (pipeline->use_chain_dma) { - dev_warn(sdev->dev, "use_chain_dma set for schduler %s", + dev_warn(sdev->dev, "use_chain_dma set for scheduler %s", swidget->widget->name); return 0; } @@ -2149,7 +2149,7 @@ static int sof_ipc4_widget_free(struct snd_sof_dev *sdev, struct snd_sof_widget u32 header; if (pipeline->use_chain_dma) { - dev_warn(sdev->dev, "use_chain_dma set for schduler %s", + dev_warn(sdev->dev, "use_chain_dma set for scheduler %s", swidget->widget->name); mutex_unlock(&ipc4_data->pipeline_state_mutex); return 0; -- 2.30.2

2 1

Re: [PATCH 3/4] ASoC: amd: acp: Add machine driver that enables sound for systems with a ES8336 codec
by 沈一超 23 Mar '23

23 Mar '23

> > Regarding playing the speaker and headphone simultaneously, is not > > something I took into account. Is this even a valid usecase? The intel driver > > for es8336 doesn't seem to support it. > > Yes, for example consider a critical notification - the system > may wish to ensure it is audible even if the user has taken off > their headphones for some reason. In practice the speaker and the headphone are conflicting devices, see https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/Intel/sof-es… There is no such situation, and the system doesn't produce sound from speaker when headphones are plugged in. The user may manually open speaker using amixer sset 'Speaker' on or pavucontrol. The GPIO thing on Huawei Intel platform is too complicated, they use two GPIOs for headphone and speaker, and the headphone GPIO is inverted, which means low means on and high means off. Luckily there should be only one hardware config for the AMD acp3x platform GPIO and you may just choose the correct one.

2 1

[PATCH v2] ASoC: SOF: ipc4-control: Return on error in sof_ipc4_widget_kcontrol_setup()
by Peter Ujfalusi 23 Mar '23

23 Mar '23

The patch adding the bytes control support moved the error check outside of the list_for_each_entry() which was not correct as at the end of the list_for_each_entry() the scontrol will no longer point where the error happened, but it to the list head. Restore the original logic and return on the first error with the error code. Fixes: a062c8899fed ("ASoC: SOF: ipc4-control: Add support for bytes control get and put") Reported-by: Dan Carpenter <error27(a)gmail.com> Link: https://lore.kernel.org/alsa-devel/6be945d2-40cb-46fb-67ba-ed3a19cddfa4@lin… Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/sof/ipc4-control.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/ipc4-control.c b/sound/soc/sof/ipc4-control.c index d26ed2a6029f..6f0698be9451 100644 --- a/sound/soc/sof/ipc4-control.c +++ b/sound/soc/sof/ipc4-control.c @@ -429,14 +429,17 @@ static int sof_ipc4_widget_kcontrol_setup(struct snd_sof_dev *sdev, struct snd_s default: break; } + + if (ret < 0) { + dev_err(sdev->dev, + "kcontrol %d set up failed for widget %s\n", + scontrol->comp_id, swidget->widget->name); + return ret; + } } } - if (ret < 0) - dev_err(sdev->dev, "kcontrol %d set up failed for widget %s\n", - scontrol->comp_id, swidget->widget->name); - - return ret; + return 0; } static int -- 2.40.0

3 2

[PATCH] ASoC: SOF: ipc4-control: Return on error in sof_ipc4_widget_kcontrol_setup()
by Peter Ujfalusi 23 Mar '23

23 Mar '23

The patch adding the bytes control support moved the error check outside of the list_for_each_entry() which will cause issues when we will have support for multiple controls per widgets. Restore the original logic and return on the first error with the error code. Fixes: a062c8899fed ("ASoC: SOF: ipc4-control: Add support for bytes control get and put") Reported-by: Dan Carpenter <error27(a)gmail.com> Link: https://lore.kernel.org/alsa-devel/6be945d2-40cb-46fb-67ba-ed3a19cddfa4@lin… Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/sof/ipc4-control.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/ipc4-control.c b/sound/soc/sof/ipc4-control.c index d26ed2a6029f..6f0698be9451 100644 --- a/sound/soc/sof/ipc4-control.c +++ b/sound/soc/sof/ipc4-control.c @@ -429,14 +429,17 @@ static int sof_ipc4_widget_kcontrol_setup(struct snd_sof_dev *sdev, struct snd_s default: break; } + + if (ret < 0) { + dev_err(sdev->dev, + "kcontrol %d set up failed for widget %s\n", + scontrol->comp_id, swidget->widget->name); + return ret; + } } } - if (ret < 0) - dev_err(sdev->dev, "kcontrol %d set up failed for widget %s\n", - scontrol->comp_id, swidget->widget->name); - - return ret; + return 0; } static int -- 2.40.0

3 6

[PATCH 0/3] ASoC: SOF: ipc4/intel: Support for ChainDMA
by Peter Ujfalusi 23 Mar '23

23 Mar '23

Hi, On a platform when the DSP is in use, we cannot select individual links to use or not use the DSP, it is either all or none. On some audio endpoint, like HDMI/DP, it is preferred to not use any processing in DSP to reduce the latency and to allow bytestream pass-through (DTS, DD, etc) IPC4 introduces a new type of end-to-end connection within the DSP which is using the host DMA and link DMA in a single buffer, working back-to-back, passing the received data without looking at it or trying to understand the format, content. This mode reduces the latency and allows non PCM streams to be sent from userspace. The feature is enabled per PCM bases, signalled in topology. Regards, Peter --- Jyri Sarha (2): ASoC: SOF: ipc4: Add macros for chain-dma message bits ASoC: SOF: ipc4/intel: Add support for chained DMA Ranjani Sridharan (1): ASoC: SOF: topology: Set pipeline widget before updating IPC structures include/sound/sof/ipc4/header.h | 29 +++++++ include/uapi/sound/sof/tokens.h | 1 + sound/soc/sof/intel/hda-dai-ops.c | 18 ++++- sound/soc/sof/ipc4-pcm.c | 122 +++++++++++++++++++++++++++++- sound/soc/sof/ipc4-topology.c | 120 ++++++++++++++++++++++++++++- sound/soc/sof/ipc4-topology.h | 2 + sound/soc/sof/topology.c | 48 ++++++------ 7 files changed, 308 insertions(+), 32 deletions(-) -- 2.40.0

2 6

[PATCH] ALSA: usb-audio: Fix recursive locking at XRUN during syncing
by Takashi Iwai 23 Mar '23

23 Mar '23

The recent support of low latency playback in USB-audio driver made the snd_usb_queue_pending_output_urbs() function to be called via PCM ack ops. In the new code path, the function is performed alread in the PCM stream lock. The problem is that, when an XRUN is detected, the function calls snd_pcm_xrun() to notify, but snd_pcm_xrun() is supposed to be called only outside the stream lock. As a result, it leads to a deadlock of PCM stream locking. For avoiding such a recursive locking, this patch adds an additional check to the code paths in PCM core that call the ack callback; now it checks the error code from the callback, and if it's -EPIPE, the XRUN is handled in the PCM core side gracefully. Along with it, the USB-audio driver code is changed to follow that, i.e. -EPIPE is returned instead of the explicit snd_pcm_xrun() call when the function is performed already in the stream lock. Fixes: d5f871f89e21 ("ALSA: usb-audio: Improved lowlatency playback support") Reported-and-tested-by: John Keeping <john(a)metanate.com> Link: https://lore.kernel.org/r/20230317195128.3911155-1-john@metanate.com Cc: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/pcm_lib.c | 2 ++ sound/usb/endpoint.c | 22 ++++++++++++++-------- sound/usb/endpoint.h | 4 ++-- sound/usb/pcm.c | 2 +- 4 files changed, 19 insertions(+), 11 deletions(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 8b6aeb8a78f7..02fd65993e7e 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -2155,6 +2155,8 @@ int pcm_lib_apply_appl_ptr(struct snd_pcm_substream *substream, ret = substream->ops->ack(substream); if (ret < 0) { runtime->control->appl_ptr = old_appl_ptr; + if (ret == -EPIPE) + __snd_pcm_xrun(substream); return ret; } } diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 419302e2057e..647fa054d8b1 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -455,8 +455,8 @@ static void push_back_to_ready_list(struct snd_usb_endpoint *ep, * This function is used both for implicit feedback endpoints and in low- * latency playback mode. */ -void snd_usb_queue_pending_output_urbs(struct snd_usb_endpoint *ep, - bool in_stream_lock) +int snd_usb_queue_pending_output_urbs(struct snd_usb_endpoint *ep, + bool in_stream_lock) { bool implicit_fb = snd_usb_endpoint_implicit_feedback_sink(ep); @@ -480,7 +480,7 @@ void snd_usb_queue_pending_output_urbs(struct snd_usb_endpoint *ep, spin_unlock_irqrestore(&ep->lock, flags); if (ctx == NULL) - return; + break; /* copy over the length information */ if (implicit_fb) { @@ -495,11 +495,14 @@ void snd_usb_queue_pending_output_urbs(struct snd_usb_endpoint *ep, break; if (err < 0) { /* push back to ready list again for -EAGAIN */ - if (err == -EAGAIN) + if (err == -EAGAIN) { push_back_to_ready_list(ep, ctx); - else + break; + } + + if (!in_stream_lock) notify_xrun(ep); - return; + return -EPIPE; } err = usb_submit_urb(ctx->urb, GFP_ATOMIC); @@ -507,13 +510,16 @@ void snd_usb_queue_pending_output_urbs(struct snd_usb_endpoint *ep, usb_audio_err(ep->chip, "Unable to submit urb #%d: %d at %s\n", ctx->index, err, __func__); - notify_xrun(ep); - return; + if (!in_stream_lock) + notify_xrun(ep); + return -EPIPE; } set_bit(ctx->index, &ep->active_mask); atomic_inc(&ep->submitted_urbs); } + + return 0; } /* diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h index 924f4351588c..c09f68ce08b1 100644 --- a/sound/usb/endpoint.h +++ b/sound/usb/endpoint.h @@ -52,7 +52,7 @@ int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep); int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep, struct snd_urb_ctx *ctx, int idx, unsigned int avail); -void snd_usb_queue_pending_output_urbs(struct snd_usb_endpoint *ep, - bool in_stream_lock); +int snd_usb_queue_pending_output_urbs(struct snd_usb_endpoint *ep, + bool in_stream_lock); #endif /* __USBAUDIO_ENDPOINT_H */ diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index d959da7a1afb..eec5232f9fb2 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1639,7 +1639,7 @@ static int snd_usb_pcm_playback_ack(struct snd_pcm_substream *substream) * outputs here */ if (!ep->active_mask) - snd_usb_queue_pending_output_urbs(ep, true); + return snd_usb_queue_pending_output_urbs(ep, true); return 0; } -- 2.35.3

3 6

ALC4082 - Asus Crosshair x670E Hero
by GitHub issues - edited 23 Mar '23

23 Mar '23

alsa-project/alsa-ucm-conf issue #295 was edited from nitin88: Hi, I am using frontend Mic and Output of x670E Hero board. Issues: 1. The mic volume is too low that I have to literally shout to record something. 2. Attached screenshot of Alsamixer (set everything to high) ![image](https://user-images.githubusercontent.com/4945664/227216525-095810ad-273c-4941-b881-b3b2467cdd86.png) 3. Copied latest master configurations Was closely following this thread https://github.com/alsa-project/alsa-ucm-conf/issues/229 as this board uses same ALC4082 but from Asrock I can help you debug/test every possible configuration with this board, any help to fix "sound recording" is appreciated. Attaching the `alsaucm -c hw:Audio dump text` [dump.txt](https://github.com/alsa-project/alsa-ucm-conf/files/11051278/dump… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/295 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ALC4082 - Asus Crosshair x670E Hero
by GitHub issues - opened 23 Mar '23

23 Mar '23

alsa-project/alsa-ucm-conf issue #295 was opened from nitin88: Hi, I am using frontend Mic and Output of x670E Hero board. Issues: 1. The mic volume is too low that I have to literally shout to record something. 2. Attached screenshot of Alsamixer (set everything to high) ![image](https://user-images.githubusercontent.com/4945664/227216525-095810ad-273c-4941-b881-b3b2467cdd86.png) 3. Copied latest master configurations Was closely following this thread https://github.com/alsa-project/alsa-ucm-conf/issues/229 as this board uses same ALC4082 but from Asrock I can help you debug/test every possible configuration with this board, any help to fix "sound recording" is appreciated. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/295 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Re: [REGRESSION] kbl-r5514-5663-max hdmi no longer working
by Linux regression tracking (Thorsten Leemhuis) 23 Mar '23

23 Mar '23

[adding a push of people and lists to the recipients that dealt with the culprit; leaving the stable list in CC for now, even if this is a mainline issue (apart from the backport of the culprit to 5.10.y Takashi asked for a while ago)] On 13.03.23 17:34, Jason Montleon wrote: > It looks like HDMI audio stopped working in 5.17-rc1. I ran a bisect > which points to 636110411ca726f19ef8e87b0be51bb9a4cdef06. FWIW, that's "ASoC: Intel/SOF: use set_stream() instead of set_tdm_slots() for HDAudio" from Pierre-Louis Bossart. > I built > 5.17.14 with it reverted and it restored HDMI output, but it doesn't > revert cleanly from 5.18 onward. > >>From what I can tell it looks like -ENOTSUPP is returned from > snd_soc_dai_set_stream for hdmi1 and hdmi2 now. I'm not sure if that's > expected, but I made the following change and I have working HDMI > audio now. https://gist.github.com/jmontleon/4780154c309f956d97ca9a304a00da3f Thanks for the report and the patch. I CCed the relevant people for this. [TLDR For the rest of the mail: : I'm adding this report to the list of tracked Linux kernel regressions; the text you find below is based on a few templates paragraphs you might have encountered already in similar form. See link in footer if these mails annoy you.] To be sure the issue doesn't fall through the cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression tracking bot: #regzbot ^introduced 636110411ca726f19ef8e87b0be51bb9a4cdef06 #regzbot title alsa/asoc: kbl-r5514-5663-max hdmi stopped working #regzbot ignore-activity This isn't a regression? This issue or a fix for it are already discussed somewhere else? It was fixed already? You want to clarify when the regression started to happen? Or point out I got the title or something else totally wrong? Then just reply and tell me -- ideally while also telling regzbot about it, as explained by the page listed in the footer of this mail. Developers: When fixing the issue, remember to add 'Link:' tags pointing to the report (the parent of this mail). See page linked in footer for details. Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) -- Everything you wanna know about Linux kernel regression tracking: https://linux-regtracking.leemhuis.info/about/#tldr That page also explains what to do if mails like this annoy you.

2 1

ucm2: codecs: va-macro: fix dmic1 mux setting
by GitHub pull_request - opened 23 Mar '23

23 Mar '23

alsa-project/alsa-ucm-conf pull request #294 was opened from Srinivas-Kandagatla: Looks like there was a typo in setting up dmic1 mux. Without this dmic01 selection would only do single channel record instead of 2 channel recording. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/294 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/294.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH 0/3] ALSA: More PCM and documentation updates
by Takashi Iwai 23 Mar '23

23 Mar '23

Hi, this is a patch set following my change to the PCM core for adding the -EPIPE handling to ack ops. Takashi === Takashi Iwai (3): ALSA: pcm: Improved XRUN handling for indirect PCM helpers ALSA: docs: Add description about ack callback -EPIPE error handling ALSA: docs: A few more words for PCM XRUN handling and stream locks .../kernel-api/writing-an-alsa-driver.rst | 22 +++++++++++++++++-- include/sound/pcm-indirect.h | 22 ++++++++++++++----- 2 files changed, 36 insertions(+), 8 deletions(-) -- 2.35.3

1 3

[PATCH resend] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
by Hans de Goede 22 Mar '23

22 Mar '23

The Acer Iconia One 7 B1-750 tablet mostly works fine with the defaults for an Bay Trail CR tablet. Except for the internal mic, instead of an analog mic on IN3 a digital mic on DMIC1 is uses. Add a quirk with these settings for this tablet. Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- Resend: I somehow forgot to add Mark Brown to the recipients with the original submission. I did add Pierre-Louis' ack for this resend. --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 79e0039c79a3..5a12940ef907 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -533,6 +533,18 @@ static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream, /* Please keep this list alphabetically sorted */ static const struct dmi_system_id byt_rt5640_quirk_table[] = { + { /* Acer Iconia One 7 B1-750 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "VESPA2"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD1_IN4P | + BYT_RT5640_OVCD_TH_1500UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* Acer Iconia Tab 8 W1-810 */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"), -- 2.39.1

2 1

[PATCH AUTOSEL 4.14 3/9] ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ] tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_ca0132.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 280643f72c6e2..13c32f3414d2f 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -2943,8 +2943,10 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, for (i = 0; i < TUNING_CTLS_COUNT; i++) if (nid == ca0132_tuning_ctls[i].nid) - break; + goto found; + return -EINVAL; +found: snd_hda_power_up(codec); dspio_set_param(codec, ca0132_tuning_ctls[i].mid, ca0132_tuning_ctls[i].req, -- 2.39.2

1 0

[PATCH AUTOSEL 4.14 2/9] ALSA: asihpi: check pao in control_message()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 9026c0bf233db53b86f74f4c620715e94eb32a09 ] control_message() might be called with pao = NULL. Here indicates control_message() as sample. (B) static void control_message(struct hpi_adapter_obj *pao, ...) { ^^^ struct hpi_hw_obj *phw = pao->priv; ... ^^^ } (A) void _HPI_6205(struct hpi_adapter_obj *pao, ...) { ^^^ ... case HPI_OBJ_CONTROL: (B) control_message(pao, phm, phr); break; ^^^ ... } void HPI_6205(...) { ... (A) _HPI_6205(NULL, phm, phr); ... ^^^^ } Therefore, We will get too many warning via cppcheck, like below sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer] struct hpi_hw_obj *phw = pao->priv; ^ sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0 _HPI_6205(NULL, phm, phr); ^ sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0 control_message(pao, phm, phr); ^ Set phr->error like many functions doing, and don't call _HPI_6205() with NULL. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/asihpi/hpi6205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c index 8d5abfa4e24bf..bc694a69b4b79 100644 --- a/sound/pci/asihpi/hpi6205.c +++ b/sound/pci/asihpi/hpi6205.c @@ -441,7 +441,7 @@ void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) pao = hpi_find_adapter(phm->adapter_index); } else { /* subsys messages don't address an adapter */ - _HPI_6205(NULL, phm, phr); + phr->error = HPI_ERROR_INVALID_OBJ_INDEX; return; } -- 2.39.2

1 0

[PATCH AUTOSEL 4.19 3/9] ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ] tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_ca0132.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index ca8a37388d565..9f0e6bbc523c3 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -3620,8 +3620,10 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, for (i = 0; i < TUNING_CTLS_COUNT; i++) if (nid == ca0132_tuning_ctls[i].nid) - break; + goto found; + return -EINVAL; +found: snd_hda_power_up(codec); dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ca0132_tuning_ctls[i].req, -- 2.39.2

1 0

[PATCH AUTOSEL 4.19 2/9] ALSA: asihpi: check pao in control_message()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 9026c0bf233db53b86f74f4c620715e94eb32a09 ] control_message() might be called with pao = NULL. Here indicates control_message() as sample. (B) static void control_message(struct hpi_adapter_obj *pao, ...) { ^^^ struct hpi_hw_obj *phw = pao->priv; ... ^^^ } (A) void _HPI_6205(struct hpi_adapter_obj *pao, ...) { ^^^ ... case HPI_OBJ_CONTROL: (B) control_message(pao, phm, phr); break; ^^^ ... } void HPI_6205(...) { ... (A) _HPI_6205(NULL, phm, phr); ... ^^^^ } Therefore, We will get too many warning via cppcheck, like below sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer] struct hpi_hw_obj *phw = pao->priv; ^ sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0 _HPI_6205(NULL, phm, phr); ^ sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0 control_message(pao, phm, phr); ^ Set phr->error like many functions doing, and don't call _HPI_6205() with NULL. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/asihpi/hpi6205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c index 2864698436a5f..6a49f897c4d91 100644 --- a/sound/pci/asihpi/hpi6205.c +++ b/sound/pci/asihpi/hpi6205.c @@ -441,7 +441,7 @@ void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) pao = hpi_find_adapter(phm->adapter_index); } else { /* subsys messages don't address an adapter */ - _HPI_6205(NULL, phm, phr); + phr->error = HPI_ERROR_INVALID_OBJ_INDEX; return; } -- 2.39.2

1 0

[PATCH AUTOSEL 5.4 3/9] ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ] tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_ca0132.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 574c39120df86..f9582053878df 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -3843,8 +3843,10 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, for (i = 0; i < TUNING_CTLS_COUNT; i++) if (nid == ca0132_tuning_ctls[i].nid) - break; + goto found; + return -EINVAL; +found: snd_hda_power_up(codec); dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ca0132_tuning_ctls[i].req, -- 2.39.2

1 0

[PATCH AUTOSEL 5.4 2/9] ALSA: asihpi: check pao in control_message()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 9026c0bf233db53b86f74f4c620715e94eb32a09 ] control_message() might be called with pao = NULL. Here indicates control_message() as sample. (B) static void control_message(struct hpi_adapter_obj *pao, ...) { ^^^ struct hpi_hw_obj *phw = pao->priv; ... ^^^ } (A) void _HPI_6205(struct hpi_adapter_obj *pao, ...) { ^^^ ... case HPI_OBJ_CONTROL: (B) control_message(pao, phm, phr); break; ^^^ ... } void HPI_6205(...) { ... (A) _HPI_6205(NULL, phm, phr); ... ^^^^ } Therefore, We will get too many warning via cppcheck, like below sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer] struct hpi_hw_obj *phw = pao->priv; ^ sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0 _HPI_6205(NULL, phm, phr); ^ sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0 control_message(pao, phm, phr); ^ Set phr->error like many functions doing, and don't call _HPI_6205() with NULL. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/asihpi/hpi6205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c index 3d6914c64c4a8..4cdaeefeb6885 100644 --- a/sound/pci/asihpi/hpi6205.c +++ b/sound/pci/asihpi/hpi6205.c @@ -430,7 +430,7 @@ void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) pao = hpi_find_adapter(phm->adapter_index); } else { /* subsys messages don't address an adapter */ - _HPI_6205(NULL, phm, phr); + phr->error = HPI_ERROR_INVALID_OBJ_INDEX; return; } -- 2.39.2

1 0

[PATCH AUTOSEL 5.10 04/12] ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ] tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_ca0132.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 24c2638cde376..6057084da4cf8 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -4108,8 +4108,10 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, for (i = 0; i < TUNING_CTLS_COUNT; i++) if (nid == ca0132_tuning_ctls[i].nid) - break; + goto found; + return -EINVAL; +found: snd_hda_power_up(codec); dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ca0132_tuning_ctls[i].req, -- 2.39.2

1 0

[PATCH AUTOSEL 5.10 03/12] ALSA: asihpi: check pao in control_message()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 9026c0bf233db53b86f74f4c620715e94eb32a09 ] control_message() might be called with pao = NULL. Here indicates control_message() as sample. (B) static void control_message(struct hpi_adapter_obj *pao, ...) { ^^^ struct hpi_hw_obj *phw = pao->priv; ... ^^^ } (A) void _HPI_6205(struct hpi_adapter_obj *pao, ...) { ^^^ ... case HPI_OBJ_CONTROL: (B) control_message(pao, phm, phr); break; ^^^ ... } void HPI_6205(...) { ... (A) _HPI_6205(NULL, phm, phr); ... ^^^^ } Therefore, We will get too many warning via cppcheck, like below sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer] struct hpi_hw_obj *phw = pao->priv; ^ sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0 _HPI_6205(NULL, phm, phr); ^ sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0 control_message(pao, phm, phr); ^ Set phr->error like many functions doing, and don't call _HPI_6205() with NULL. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/asihpi/hpi6205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c index 3d6914c64c4a8..4cdaeefeb6885 100644 --- a/sound/pci/asihpi/hpi6205.c +++ b/sound/pci/asihpi/hpi6205.c @@ -430,7 +430,7 @@ void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) pao = hpi_find_adapter(phm->adapter_index); } else { /* subsys messages don't address an adapter */ - _HPI_6205(NULL, phm, phr); + phr->error = HPI_ERROR_INVALID_OBJ_INDEX; return; } -- 2.39.2

1 0

[PATCH AUTOSEL 5.15 07/16] ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ] tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_ca0132.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index c0cb6e49a9b65..2646663e03426 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -4231,8 +4231,10 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, for (i = 0; i < TUNING_CTLS_COUNT; i++) if (nid == ca0132_tuning_ctls[i].nid) - break; + goto found; + return -EINVAL; +found: snd_hda_power_up(codec); dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ca0132_tuning_ctls[i].req, -- 2.39.2

1 0

[PATCH AUTOSEL 5.15 06/16] ALSA: asihpi: check pao in control_message()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 9026c0bf233db53b86f74f4c620715e94eb32a09 ] control_message() might be called with pao = NULL. Here indicates control_message() as sample. (B) static void control_message(struct hpi_adapter_obj *pao, ...) { ^^^ struct hpi_hw_obj *phw = pao->priv; ... ^^^ } (A) void _HPI_6205(struct hpi_adapter_obj *pao, ...) { ^^^ ... case HPI_OBJ_CONTROL: (B) control_message(pao, phm, phr); break; ^^^ ... } void HPI_6205(...) { ... (A) _HPI_6205(NULL, phm, phr); ... ^^^^ } Therefore, We will get too many warning via cppcheck, like below sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer] struct hpi_hw_obj *phw = pao->priv; ^ sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0 _HPI_6205(NULL, phm, phr); ^ sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0 control_message(pao, phm, phr); ^ Set phr->error like many functions doing, and don't call _HPI_6205() with NULL. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/asihpi/hpi6205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c index 3d6914c64c4a8..4cdaeefeb6885 100644 --- a/sound/pci/asihpi/hpi6205.c +++ b/sound/pci/asihpi/hpi6205.c @@ -430,7 +430,7 @@ void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) pao = hpi_find_adapter(phm->adapter_index); } else { /* subsys messages don't address an adapter */ - _HPI_6205(NULL, phm, phr); + phr->error = HPI_ERROR_INVALID_OBJ_INDEX; return; } -- 2.39.2

1 0

[PATCH AUTOSEL 5.15 02/16] ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds
by Sasha Levin 22 Mar '23

22 Mar '23

From: Ravulapati Vishnu Vardhan Rao <quic_visr(a)quicinc.com> [ Upstream commit e5e7e398f6bb7918dab0612eb6991f7bae95520d ] When we run syzkaller we get below Out of Bound. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: dump_backtrace+0x0/0x4c8 show_stack+0x34/0x44 dump_stack_lvl+0xd8/0x118 print_address_description+0x30/0x2d8 kasan_report+0x158/0x198 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf4/0x180 _regmap_read+0xc4/0x278 _regmap_update_bits+0x130/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_digital_mute+0xec/0x140 Actually There is no need to have decimator with 32 bits. By limiting the variable with short type u8 issue is resolved. Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr(a)quicinc.com> Link: https://lore.kernel.org/r/20230304080702.609-1-quic_visr@quicinc.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/lpass-tx-macro.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index 2b7ba78551fab..35d148e60c334 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -239,7 +239,7 @@ enum { struct tx_mute_work { struct tx_macro *tx; - u32 decimator; + u8 decimator; struct delayed_work dwork; }; @@ -632,7 +632,7 @@ static int tx_macro_mclk_enable(struct tx_macro *tx, return 0; } -static bool is_amic_enabled(struct snd_soc_component *component, int decimator) +static bool is_amic_enabled(struct snd_soc_component *component, u8 decimator) { u16 adc_mux_reg, adc_reg, adc_n; @@ -843,7 +843,7 @@ static int tx_macro_enable_dec(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - unsigned int decimator; + u8 decimator; u16 tx_vol_ctl_reg, dec_cfg_reg, hpf_gate_reg, tx_gain_ctl_reg; u8 hpf_cut_off_freq; int hpf_delay = TX_MACRO_DMIC_HPF_DELAY_MS; @@ -1058,7 +1058,8 @@ static int tx_macro_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct snd_soc_component *component = dai->component; - u32 decimator, sample_rate; + u32 sample_rate; + u8 decimator; int tx_fs_rate; struct tx_macro *tx = snd_soc_component_get_drvdata(component); @@ -1122,7 +1123,7 @@ static int tx_macro_digital_mute(struct snd_soc_dai *dai, int mute, int stream) { struct snd_soc_component *component = dai->component; struct tx_macro *tx = snd_soc_component_get_drvdata(component); - u16 decimator; + u8 decimator; decimator = tx->active_decimator[dai->id]; -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 21/34] ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ] tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_ca0132.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index acde4cd58785e..099722ebaed83 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -4228,8 +4228,10 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, for (i = 0; i < TUNING_CTLS_COUNT; i++) if (nid == ca0132_tuning_ctls[i].nid) - break; + goto found; + return -EINVAL; +found: snd_hda_power_up(codec); dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ca0132_tuning_ctls[i].req, -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 20/34] ALSA: asihpi: check pao in control_message()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 9026c0bf233db53b86f74f4c620715e94eb32a09 ] control_message() might be called with pao = NULL. Here indicates control_message() as sample. (B) static void control_message(struct hpi_adapter_obj *pao, ...) { ^^^ struct hpi_hw_obj *phw = pao->priv; ... ^^^ } (A) void _HPI_6205(struct hpi_adapter_obj *pao, ...) { ^^^ ... case HPI_OBJ_CONTROL: (B) control_message(pao, phm, phr); break; ^^^ ... } void HPI_6205(...) { ... (A) _HPI_6205(NULL, phm, phr); ... ^^^^ } Therefore, We will get too many warning via cppcheck, like below sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer] struct hpi_hw_obj *phw = pao->priv; ^ sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0 _HPI_6205(NULL, phm, phr); ^ sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0 control_message(pao, phm, phr); ^ Set phr->error like many functions doing, and don't call _HPI_6205() with NULL. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/asihpi/hpi6205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c index 27e11b5f70b97..c7d7eff86727f 100644 --- a/sound/pci/asihpi/hpi6205.c +++ b/sound/pci/asihpi/hpi6205.c @@ -430,7 +430,7 @@ void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) pao = hpi_find_adapter(phm->adapter_index); } else { /* subsys messages don't address an adapter */ - _HPI_6205(NULL, phm, phr); + phr->error = HPI_ERROR_INVALID_OBJ_INDEX; return; } -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 13/34] ASoC: SOF: IPC4: update gain ipc msg definition to align with fw
by Sasha Levin 22 Mar '23

22 Mar '23

From: Rander Wang <rander.wang(a)intel.com> [ Upstream commit e45cd86c3a78bfb9875a5eb8ab5dab459b59bbe2 ] Recent firmware changes modified the curve duration from 32 to 64 bits, which breaks volume ramps. A simple solution would be to change the definition, but unfortunately the ASoC topology framework only supports up to 32 bit tokens. This patch suggests breaking the 64 bit value in low and high parts, with only the low-part extracted from topology and high-part only zeroes. Since the curve duration is represented in hundred of nanoseconds, we can still represent a 400s ramp, which is just fine. The defacto ABI change has no effect on existing users since the IPC4 firmware has not been released just yet. Link: https://github.com/thesofproject/linux/issues/4026 Signed-off-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307110656.1816-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/ipc4-control.c | 3 ++- sound/soc/sof/ipc4-topology.c | 4 ++-- sound/soc/sof/ipc4-topology.h | 6 ++++-- 3 files changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/ipc4-control.c b/sound/soc/sof/ipc4-control.c index 0d5a578c34962..7442ec1c5a4d4 100644 --- a/sound/soc/sof/ipc4-control.c +++ b/sound/soc/sof/ipc4-control.c @@ -84,7 +84,8 @@ sof_ipc4_set_volume_data(struct snd_sof_dev *sdev, struct snd_sof_widget *swidge } /* set curve type and duration from topology */ - data.curve_duration = gain->data.curve_duration; + data.curve_duration_l = gain->data.curve_duration_l; + data.curve_duration_h = gain->data.curve_duration_h; data.curve_type = gain->data.curve_type; msg->data_ptr = &data; diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 41617569f50fb..49289932ba7e6 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -106,7 +106,7 @@ static const struct sof_topology_token gain_tokens[] = { get_token_u32, offsetof(struct sof_ipc4_gain_data, curve_type)}, {SOF_TKN_GAIN_RAMP_DURATION, SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32, - offsetof(struct sof_ipc4_gain_data, curve_duration)}, + offsetof(struct sof_ipc4_gain_data, curve_duration_l)}, {SOF_TKN_GAIN_VAL, SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32, offsetof(struct sof_ipc4_gain_data, init_val)}, }; @@ -682,7 +682,7 @@ static int sof_ipc4_widget_setup_comp_pga(struct snd_sof_widget *swidget) dev_dbg(scomp->dev, "pga widget %s: ramp type: %d, ramp duration %d, initial gain value: %#x, cpc %d\n", - swidget->widget->name, gain->data.curve_type, gain->data.curve_duration, + swidget->widget->name, gain->data.curve_type, gain->data.curve_duration_l, gain->data.init_val, gain->base_config.cpc); ret = sof_ipc4_widget_setup_msg(swidget, &gain->msg); diff --git a/sound/soc/sof/ipc4-topology.h b/sound/soc/sof/ipc4-topology.h index 0aa87a8add5d3..edf1638221a4b 100644 --- a/sound/soc/sof/ipc4-topology.h +++ b/sound/soc/sof/ipc4-topology.h @@ -217,14 +217,16 @@ struct sof_ipc4_control_data { * @init_val: Initial value * @curve_type: Curve type * @reserved: reserved for future use - * @curve_duration: Curve duration + * @curve_duration_l: Curve duration low part + * @curve_duration_h: Curve duration high part */ struct sof_ipc4_gain_data { uint32_t channels; uint32_t init_val; uint32_t curve_type; uint32_t reserved; - uint32_t curve_duration; + uint32_t curve_duration_l; + uint32_t curve_duration_h; } __aligned(8); /** -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 12/34] ASoC: SOF: Intel: pci-tng: revert invalid bar size setting
by Sasha Levin 22 Mar '23

22 Mar '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit ca09e2a351fbc7836ba9418304ff0c3e72addfe0 ] The logic for the ioremap is to find the resource index 3 (IRAM) and infer the BAR address by subtracting the IRAM offset. The BAR size defined in hardware specifications is 2MB. The commit 5947b2726beb6 ("ASoC: SOF: Intel: Check the bar size before remapping") tried to find the BAR size by querying the resource length instead of a pre-canned value, but by requesting the size for index 3 it only gets the size of the IRAM. That's obviously wrong and prevents the probe from proceeding. This commit attempted to fix an issue in a fuzzing/simulated environment but created another on actual devices, so the best course of action is to revert that change. Reported-by: Ferry Toth <fntoth(a)gmail.com> Tested-by: Ferry Toth <fntoth(a)gmail.com> (Intel Edison-Arduino) Link: https://github.com/thesofproject/linux/issues/3901 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307095341.3222-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/pci-tng.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/sof/intel/pci-tng.c b/sound/soc/sof/intel/pci-tng.c index f0f6d9ba88037..0b17d1bb225e2 100644 --- a/sound/soc/sof/intel/pci-tng.c +++ b/sound/soc/sof/intel/pci-tng.c @@ -75,11 +75,7 @@ static int tangier_pci_probe(struct snd_sof_dev *sdev) /* LPE base */ base = pci_resource_start(pci, desc->resindex_lpe_base) - IRAM_OFFSET; - size = pci_resource_len(pci, desc->resindex_lpe_base); - if (size < PCI_BAR_SIZE) { - dev_err(sdev->dev, "error: I/O region is too small.\n"); - return -ENODEV; - } + size = PCI_BAR_SIZE; dev_dbg(sdev->dev, "LPE PHY base at 0x%x size 0x%x", base, size); sdev->bar[DSP_BAR] = devm_ioremap(sdev->dev, base, size); -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 11/34] ASoC: SOF: ipc4-topology: Fix incorrect sample rate print unit
by Sasha Levin 22 Mar '23

22 Mar '23

From: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> [ Upstream commit 9e269e3aa9006440de639597079ee7140ef5b5f3 ] This patch fixes the sample rate print unit from KHz to Hz. E.g. 48000KHz becomes 48000Hz. Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307110751.2053-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/ipc4-topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index a81af5f73a4b4..41617569f50fb 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -154,7 +154,7 @@ static void sof_ipc4_dbg_audio_format(struct device *dev, for (i = 0; i < num_format; i++, ptr = (u8 *)ptr + object_size) { fmt = ptr; dev_dbg(dev, - " #%d: %uKHz, %ubit (ch_map %#x ch_cfg %u interleaving_style %u fmt_cfg %#x)\n", + " #%d: %uHz, %ubit (ch_map %#x ch_cfg %u interleaving_style %u fmt_cfg %#x)\n", i, fmt->sampling_frequency, fmt->bit_depth, fmt->ch_map, fmt->ch_cfg, fmt->interleaving_style, fmt->fmt_cfg); } -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 10/34] ASoC: SOF: ipc3: Check for upper size limit for the received message
by Sasha Levin 22 Mar '23

22 Mar '23

From: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> [ Upstream commit 989a3e4479177d0f4afab8be1960731bc0ffbbd0 ] The sof_ipc3_rx_msg() checks for minimum size of a new rx message but it is missing the check for upper limit. Corrupted or compromised firmware might be able to take advantage of this to cause out of bounds reads outside of the message area. Reported-by: Curtis Malainey <cujomalainey(a)chromium.org> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Curtis Malainey <curtis(a)malainey.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307114917.5124-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/ipc3.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/ipc3.c b/sound/soc/sof/ipc3.c index b28af3a48b707..60b96b0c2412f 100644 --- a/sound/soc/sof/ipc3.c +++ b/sound/soc/sof/ipc3.c @@ -970,8 +970,9 @@ static void sof_ipc3_rx_msg(struct snd_sof_dev *sdev) return; } - if (hdr.size < sizeof(hdr)) { - dev_err(sdev->dev, "The received message size is invalid\n"); + if (hdr.size < sizeof(hdr) || hdr.size > SOF_IPC_MSG_MAX_SIZE) { + dev_err(sdev->dev, "The received message size is invalid: %u\n", + hdr.size); return; } -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 06/34] ASoC: Intel: avs: nau8825: Adjust clock control
by Sasha Levin 22 Mar '23

22 Mar '23

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 6206b2e787da2ed567922c37bb588a44f6fb6705 ] Internal clock shall be adjusted also in cases when DAPM event other than 'ON' is triggered. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20230303134854.2277146-6-amadeuszx.slawinski@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/nau8825.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/soc/intel/avs/boards/nau8825.c b/sound/soc/intel/avs/boards/nau8825.c index f76909e9f990a..8392d8fac8f9c 100644 --- a/sound/soc/intel/avs/boards/nau8825.c +++ b/sound/soc/intel/avs/boards/nau8825.c @@ -33,15 +33,15 @@ avs_nau8825_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *co return -EINVAL; } - if (!SND_SOC_DAPM_EVENT_ON(event)) { + if (SND_SOC_DAPM_EVENT_ON(event)) + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_MCLK, 24000000, + SND_SOC_CLOCK_IN); + else ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return ret; - } - } + if (ret < 0) + dev_err(card->dev, "Set sysclk failed: %d\n", ret); - return 0; + return ret; } static const struct snd_kcontrol_new card_controls[] = { -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 05/34] ASoC: Intel: avs: ssm4567: Remove nau8825 bits
by Sasha Levin 22 Mar '23

22 Mar '23

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 933de2d127281731166cf2880fa1e23c5a0f7faa ] Some of the nau8825 clock control got into the ssm4567, remove it. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20230303134854.2277146-5-amadeuszx.slawinski@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/ssm4567.c | 31 ---------------------------- 1 file changed, 31 deletions(-) diff --git a/sound/soc/intel/avs/boards/ssm4567.c b/sound/soc/intel/avs/boards/ssm4567.c index 9f84c8ab34478..51a8867326b47 100644 --- a/sound/soc/intel/avs/boards/ssm4567.c +++ b/sound/soc/intel/avs/boards/ssm4567.c @@ -15,7 +15,6 @@ #include <sound/soc-acpi.h> #include "../../../codecs/nau8825.h" -#define SKL_NUVOTON_CODEC_DAI "nau8825-hifi" #define SKL_SSM_CODEC_DAI "ssm4567-hifi" static struct snd_soc_codec_conf card_codec_conf[] = { @@ -34,41 +33,11 @@ static const struct snd_kcontrol_new card_controls[] = { SOC_DAPM_PIN_SWITCH("Right Speaker"), }; -static int -platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *control, int event) -{ - struct snd_soc_dapm_context *dapm = w->dapm; - struct snd_soc_card *card = dapm->card; - struct snd_soc_dai *codec_dai; - int ret; - - codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); - if (!codec_dai) { - dev_err(card->dev, "Codec dai not found\n"); - return -EINVAL; - } - - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_MCLK, 24000000, - SND_SOC_CLOCK_IN); - if (ret < 0) - dev_err(card->dev, "set sysclk err = %d\n", ret); - } else { - ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); - if (ret < 0) - dev_err(card->dev, "set sysclk err = %d\n", ret); - } - - return ret; -} - static const struct snd_soc_dapm_widget card_widgets[] = { SND_SOC_DAPM_SPK("Left Speaker", NULL), SND_SOC_DAPM_SPK("Right Speaker", NULL), SND_SOC_DAPM_SPK("DP1", NULL), SND_SOC_DAPM_SPK("DP2", NULL), - SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), }; static const struct snd_soc_dapm_route card_base_routes[] = { -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 04/34] ASoC: Intel: avs: da7219: Explicitly define codec format
by Sasha Levin 22 Mar '23

22 Mar '23

From: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> [ Upstream commit 61f368624fe4d0c25c6e9c917574b8ace51d776e ] da7219 is headset codec configured in 48000/2/S24_LE format regardless of front end format, so force it to be so. Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20230303134854.2277146-3-amadeuszx.slawinski@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/da7219.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/sound/soc/intel/avs/boards/da7219.c b/sound/soc/intel/avs/boards/da7219.c index 02ae542ad7792..a63563594b4cd 100644 --- a/sound/soc/intel/avs/boards/da7219.c +++ b/sound/soc/intel/avs/boards/da7219.c @@ -111,6 +111,26 @@ static int avs_da7219_codec_init(struct snd_soc_pcm_runtime *runtime) return 0; } +static int +avs_da7219_be_fixup(struct snd_soc_pcm_runtime *runrime, struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate, *channels; + struct snd_mask *fmt; + + rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); + fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + + /* The ADSP will convert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP0 to 24 bit */ + snd_mask_none(fmt); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); + return 0; +} + static int avs_create_dai_link(struct device *dev, const char *platform_name, int ssp_port, struct snd_soc_dai_link **dai_link) { @@ -142,6 +162,7 @@ static int avs_create_dai_link(struct device *dev, const char *platform_name, in dl->num_platforms = 1; dl->id = 0; dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; + dl->be_hw_params_fixup = avs_da7219_be_fixup; dl->init = avs_da7219_codec_init; dl->nonatomic = 1; dl->no_pcm = 1; -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 03/34] ASoC: Intel: avs: max98357a: Explicitly define codec format
by Sasha Levin 22 Mar '23

22 Mar '23

From: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> [ Upstream commit d16c893425d07ada1fdd817ec06d322efcf69480 ] max98357a is speaker codec configured in 48000/2/S16_LE format regardless of front end format, so force it to be so. Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20230303134854.2277146-2-amadeuszx.slawinski@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/max98357a.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/sound/soc/intel/avs/boards/max98357a.c b/sound/soc/intel/avs/boards/max98357a.c index 921f42caf7e09..183123d08c5a3 100644 --- a/sound/soc/intel/avs/boards/max98357a.c +++ b/sound/soc/intel/avs/boards/max98357a.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/soc-acpi.h> #include <sound/soc-dapm.h> @@ -24,6 +25,26 @@ static const struct snd_soc_dapm_route card_base_routes[] = { { "Spk", NULL, "Speaker" }, }; +static int +avs_max98357a_be_fixup(struct snd_soc_pcm_runtime *runrime, struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate, *channels; + struct snd_mask *fmt; + + rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); + fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + + /* The ADSP will convert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP0 to 16 bit */ + snd_mask_none(fmt); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); + return 0; +} + static int avs_create_dai_link(struct device *dev, const char *platform_name, int ssp_port, struct snd_soc_dai_link **dai_link) { @@ -55,6 +76,7 @@ static int avs_create_dai_link(struct device *dev, const char *platform_name, in dl->num_platforms = 1; dl->id = 0; dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; + dl->be_hw_params_fixup = avs_max98357a_be_fixup; dl->nonatomic = 1; dl->no_pcm = 1; dl->dpcm_playback = 1; -- 2.39.2

1 0

[PATCH AUTOSEL 6.1 02/34] ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds
by Sasha Levin 22 Mar '23

22 Mar '23

From: Ravulapati Vishnu Vardhan Rao <quic_visr(a)quicinc.com> [ Upstream commit e5e7e398f6bb7918dab0612eb6991f7bae95520d ] When we run syzkaller we get below Out of Bound. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: dump_backtrace+0x0/0x4c8 show_stack+0x34/0x44 dump_stack_lvl+0xd8/0x118 print_address_description+0x30/0x2d8 kasan_report+0x158/0x198 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf4/0x180 _regmap_read+0xc4/0x278 _regmap_update_bits+0x130/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_digital_mute+0xec/0x140 Actually There is no need to have decimator with 32 bits. By limiting the variable with short type u8 issue is resolved. Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr(a)quicinc.com> Link: https://lore.kernel.org/r/20230304080702.609-1-quic_visr@quicinc.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/lpass-tx-macro.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index 5d1c58df081ac..e5611f655beda 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -241,7 +241,7 @@ enum { struct tx_mute_work { struct tx_macro *tx; - u32 decimator; + u8 decimator; struct delayed_work dwork; }; @@ -634,7 +634,7 @@ static int tx_macro_mclk_enable(struct tx_macro *tx, return 0; } -static bool is_amic_enabled(struct snd_soc_component *component, int decimator) +static bool is_amic_enabled(struct snd_soc_component *component, u8 decimator) { u16 adc_mux_reg, adc_reg, adc_n; @@ -845,7 +845,7 @@ static int tx_macro_enable_dec(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - unsigned int decimator; + u8 decimator; u16 tx_vol_ctl_reg, dec_cfg_reg, hpf_gate_reg, tx_gain_ctl_reg; u8 hpf_cut_off_freq; int hpf_delay = TX_MACRO_DMIC_HPF_DELAY_MS; @@ -1060,7 +1060,8 @@ static int tx_macro_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct snd_soc_component *component = dai->component; - u32 decimator, sample_rate; + u32 sample_rate; + u8 decimator; int tx_fs_rate; struct tx_macro *tx = snd_soc_component_get_drvdata(component); @@ -1124,7 +1125,7 @@ static int tx_macro_digital_mute(struct snd_soc_dai *dai, int mute, int stream) { struct snd_soc_component *component = dai->component; struct tx_macro *tx = snd_soc_component_get_drvdata(component); - u16 decimator; + u8 decimator; /* active decimator not set yet */ if (tx->active_decimator[dai->id] == -1) -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 31/45] ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ] tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_ca0132.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index acde4cd58785e..099722ebaed83 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -4228,8 +4228,10 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, for (i = 0; i < TUNING_CTLS_COUNT; i++) if (nid == ca0132_tuning_ctls[i].nid) - break; + goto found; + return -EINVAL; +found: snd_hda_power_up(codec); dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ca0132_tuning_ctls[i].req, -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 30/45] ALSA: asihpi: check pao in control_message()
by Sasha Levin 22 Mar '23

22 Mar '23

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 9026c0bf233db53b86f74f4c620715e94eb32a09 ] control_message() might be called with pao = NULL. Here indicates control_message() as sample. (B) static void control_message(struct hpi_adapter_obj *pao, ...) { ^^^ struct hpi_hw_obj *phw = pao->priv; ... ^^^ } (A) void _HPI_6205(struct hpi_adapter_obj *pao, ...) { ^^^ ... case HPI_OBJ_CONTROL: (B) control_message(pao, phm, phr); break; ^^^ ... } void HPI_6205(...) { ... (A) _HPI_6205(NULL, phm, phr); ... ^^^^ } Therefore, We will get too many warning via cppcheck, like below sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer] struct hpi_hw_obj *phw = pao->priv; ^ sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0 _HPI_6205(NULL, phm, phr); ^ sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0 control_message(pao, phm, phr); ^ Set phr->error like many functions doing, and don't call _HPI_6205() with NULL. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/asihpi/hpi6205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c index 27e11b5f70b97..c7d7eff86727f 100644 --- a/sound/pci/asihpi/hpi6205.c +++ b/sound/pci/asihpi/hpi6205.c @@ -430,7 +430,7 @@ void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) pao = hpi_find_adapter(phm->adapter_index); } else { /* subsys messages don't address an adapter */ - _HPI_6205(NULL, phm, phr); + phr->error = HPI_ERROR_INVALID_OBJ_INDEX; return; } -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 20/45] ASoC: hdmi-codec: only startup/shutdown on supported streams
by Sasha Levin 22 Mar '23

22 Mar '23

From: Emil Abildgaard Svendsen <EMAS(a)bang-olufsen.dk> [ Upstream commit e041a2a550582106cba6a7c862c90dfc2ad14492 ] Currently only one stream is supported. This isn't usally a problem until you have a multi codec audio card. Because the audio card will run startup and shutdown on both capture and playback streams. So if your hdmi-codec only support either playback or capture. Then ALSA can't open for playback and capture. This patch will ignore if startup and shutdown are called with a non supported stream. Thus, allowing an audio card like this: +-+ cpu1 <--@-| |-> codec1 (HDMI-CODEC) | |<- codec2 (NOT HDMI-CODEC) +-+ Signed-off-by: Emil Svendsen <emas(a)bang-olufsen.dk> Link: https://lore.kernel.org/r/20230309065432.4150700-2-emas@bang-olufsen.dk Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/hdmi-codec.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index 74cbbe16f9aec..a22f2ec95901f 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -428,8 +428,13 @@ static int hdmi_codec_startup(struct snd_pcm_substream *substream, { struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai); bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + bool has_capture = !hcp->hcd.no_i2s_capture; + bool has_playback = !hcp->hcd.no_i2s_playback; int ret = 0; + if (!((has_playback && tx) || (has_capture && !tx))) + return 0; + mutex_lock(&hcp->lock); if (hcp->busy) { dev_err(dai->dev, "Only one simultaneous stream supported!\n"); @@ -468,6 +473,12 @@ static void hdmi_codec_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + bool has_capture = !hcp->hcd.no_i2s_capture; + bool has_playback = !hcp->hcd.no_i2s_playback; + + if (!((has_playback && tx) || (has_capture && !tx))) + return; hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN; hcp->hcd.ops->audio_shutdown(dai->dev->parent, hcp->hcd.data); -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 19/45] ASoC: SOF: IPC4: update gain ipc msg definition to align with fw
by Sasha Levin 22 Mar '23

22 Mar '23

From: Rander Wang <rander.wang(a)intel.com> [ Upstream commit e45cd86c3a78bfb9875a5eb8ab5dab459b59bbe2 ] Recent firmware changes modified the curve duration from 32 to 64 bits, which breaks volume ramps. A simple solution would be to change the definition, but unfortunately the ASoC topology framework only supports up to 32 bit tokens. This patch suggests breaking the 64 bit value in low and high parts, with only the low-part extracted from topology and high-part only zeroes. Since the curve duration is represented in hundred of nanoseconds, we can still represent a 400s ramp, which is just fine. The defacto ABI change has no effect on existing users since the IPC4 firmware has not been released just yet. Link: https://github.com/thesofproject/linux/issues/4026 Signed-off-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307110656.1816-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/ipc4-control.c | 3 ++- sound/soc/sof/ipc4-topology.c | 4 ++-- sound/soc/sof/ipc4-topology.h | 6 ++++-- 3 files changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/ipc4-control.c b/sound/soc/sof/ipc4-control.c index 0d5a578c34962..7442ec1c5a4d4 100644 --- a/sound/soc/sof/ipc4-control.c +++ b/sound/soc/sof/ipc4-control.c @@ -84,7 +84,8 @@ sof_ipc4_set_volume_data(struct snd_sof_dev *sdev, struct snd_sof_widget *swidge } /* set curve type and duration from topology */ - data.curve_duration = gain->data.curve_duration; + data.curve_duration_l = gain->data.curve_duration_l; + data.curve_duration_h = gain->data.curve_duration_h; data.curve_type = gain->data.curve_type; msg->data_ptr = &data; diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 65da1cf790d9c..6da6137fa2cbc 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -107,7 +107,7 @@ static const struct sof_topology_token gain_tokens[] = { get_token_u32, offsetof(struct sof_ipc4_gain_data, curve_type)}, {SOF_TKN_GAIN_RAMP_DURATION, SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32, - offsetof(struct sof_ipc4_gain_data, curve_duration)}, + offsetof(struct sof_ipc4_gain_data, curve_duration_l)}, {SOF_TKN_GAIN_VAL, SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32, offsetof(struct sof_ipc4_gain_data, init_val)}, }; @@ -670,7 +670,7 @@ static int sof_ipc4_widget_setup_comp_pga(struct snd_sof_widget *swidget) dev_dbg(scomp->dev, "pga widget %s: ramp type: %d, ramp duration %d, initial gain value: %#x, cpc %d\n", - swidget->widget->name, gain->data.curve_type, gain->data.curve_duration, + swidget->widget->name, gain->data.curve_type, gain->data.curve_duration_l, gain->data.init_val, gain->base_config.cpc); ret = sof_ipc4_widget_setup_msg(swidget, &gain->msg); diff --git a/sound/soc/sof/ipc4-topology.h b/sound/soc/sof/ipc4-topology.h index 0aa87a8add5d3..edf1638221a4b 100644 --- a/sound/soc/sof/ipc4-topology.h +++ b/sound/soc/sof/ipc4-topology.h @@ -217,14 +217,16 @@ struct sof_ipc4_control_data { * @init_val: Initial value * @curve_type: Curve type * @reserved: reserved for future use - * @curve_duration: Curve duration + * @curve_duration_l: Curve duration low part + * @curve_duration_h: Curve duration high part */ struct sof_ipc4_gain_data { uint32_t channels; uint32_t init_val; uint32_t curve_type; uint32_t reserved; - uint32_t curve_duration; + uint32_t curve_duration_l; + uint32_t curve_duration_h; } __aligned(8); /** -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 18/45] ASoC: SOF: Intel: hda-ctrl: re-add sleep after entering and exiting reset
by Sasha Levin 22 Mar '23

22 Mar '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit 8bac40b8ed17ab1be9133e9620f65fae80262b7e ] This reverts commit a09d82ce0a867 ("ASoC: SOF: Intel: hda-ctrl: remove useless sleep") It was a mistake to remove those delays, in light of comments in the HDaudio spec captured in snd_hdac_bus_reset_link() that the codec needs time for its initialization and PLL lock. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307095412.3416-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/hda-ctrl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/sof/intel/hda-ctrl.c b/sound/soc/sof/intel/hda-ctrl.c index 3aea36c077c9d..f3bdeba284122 100644 --- a/sound/soc/sof/intel/hda-ctrl.c +++ b/sound/soc/sof/intel/hda-ctrl.c @@ -196,12 +196,15 @@ int hda_dsp_ctrl_init_chip(struct snd_sof_dev *sdev) goto err; } + usleep_range(500, 1000); + /* exit HDA controller reset */ ret = hda_dsp_ctrl_link_reset(sdev, false); if (ret < 0) { dev_err(sdev->dev, "error: failed to exit HDA controller reset\n"); goto err; } + usleep_range(1000, 1200); hda_codec_detect_mask(sdev); -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 17/45] ASoC: SOF: Intel: hda-dsp: harden D0i3 programming sequence
by Sasha Levin 22 Mar '23

22 Mar '23

From: Rander Wang <rander.wang(a)intel.com> [ Upstream commit 52a55779ed14792a150421339664193d6eb8e036 ] Add delay between set and wait command according to hardware programming sequence. Also add debug log to detect error. Signed-off-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307095453.3719-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/hda-dsp.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c index b4eacae8564c8..6b2094f74c9c0 100644 --- a/sound/soc/sof/intel/hda-dsp.c +++ b/sound/soc/sof/intel/hda-dsp.c @@ -399,6 +399,12 @@ static int hda_dsp_update_d0i3c_register(struct snd_sof_dev *sdev, u8 value) snd_sof_dsp_update8(sdev, HDA_DSP_HDA_BAR, chip->d0i3_offset, SOF_HDA_VS_D0I3C_I3, value); + /* + * The value written to the D0I3C::I3 bit may not be taken into account immediately. + * A delay is recommended before checking if D0I3C::CIP is cleared + */ + usleep_range(30, 40); + /* Wait for cmd in progress to be cleared before exiting the function */ ret = hda_dsp_wait_d0i3c_done(sdev); if (ret < 0) { @@ -407,6 +413,12 @@ static int hda_dsp_update_d0i3c_register(struct snd_sof_dev *sdev, u8 value) } reg = snd_sof_dsp_read8(sdev, HDA_DSP_HDA_BAR, chip->d0i3_offset); + /* Confirm d0i3 state changed with paranoia check */ + if ((reg ^ value) & SOF_HDA_VS_D0I3C_I3) { + dev_err(sdev->dev, "failed to update D0I3C!\n"); + return -EIO; + } + trace_sof_intel_D0I3C_updated(sdev, reg); return 0; -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 16/45] ASoC: SOF: Intel: pci-tng: revert invalid bar size setting
by Sasha Levin 22 Mar '23

22 Mar '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit ca09e2a351fbc7836ba9418304ff0c3e72addfe0 ] The logic for the ioremap is to find the resource index 3 (IRAM) and infer the BAR address by subtracting the IRAM offset. The BAR size defined in hardware specifications is 2MB. The commit 5947b2726beb6 ("ASoC: SOF: Intel: Check the bar size before remapping") tried to find the BAR size by querying the resource length instead of a pre-canned value, but by requesting the size for index 3 it only gets the size of the IRAM. That's obviously wrong and prevents the probe from proceeding. This commit attempted to fix an issue in a fuzzing/simulated environment but created another on actual devices, so the best course of action is to revert that change. Reported-by: Ferry Toth <fntoth(a)gmail.com> Tested-by: Ferry Toth <fntoth(a)gmail.com> (Intel Edison-Arduino) Link: https://github.com/thesofproject/linux/issues/3901 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307095341.3222-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/intel/pci-tng.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/sof/intel/pci-tng.c b/sound/soc/sof/intel/pci-tng.c index 5b2b409752c58..8c22a00266c06 100644 --- a/sound/soc/sof/intel/pci-tng.c +++ b/sound/soc/sof/intel/pci-tng.c @@ -75,11 +75,7 @@ static int tangier_pci_probe(struct snd_sof_dev *sdev) /* LPE base */ base = pci_resource_start(pci, desc->resindex_lpe_base) - IRAM_OFFSET; - size = pci_resource_len(pci, desc->resindex_lpe_base); - if (size < PCI_BAR_SIZE) { - dev_err(sdev->dev, "error: I/O region is too small.\n"); - return -ENODEV; - } + size = PCI_BAR_SIZE; dev_dbg(sdev->dev, "LPE PHY base at 0x%x size 0x%x", base, size); sdev->bar[DSP_BAR] = devm_ioremap(sdev->dev, base, size); -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 15/45] ASoC: SOF: ipc4-topology: Fix incorrect sample rate print unit
by Sasha Levin 22 Mar '23

22 Mar '23

From: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> [ Upstream commit 9e269e3aa9006440de639597079ee7140ef5b5f3 ] This patch fixes the sample rate print unit from KHz to Hz. E.g. 48000KHz becomes 48000Hz. Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307110751.2053-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/ipc4-topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 59f4d42f9011e..65da1cf790d9c 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -155,7 +155,7 @@ static void sof_ipc4_dbg_audio_format(struct device *dev, for (i = 0; i < num_format; i++, ptr = (u8 *)ptr + object_size) { fmt = ptr; dev_dbg(dev, - " #%d: %uKHz, %ubit (ch_map %#x ch_cfg %u interleaving_style %u fmt_cfg %#x)\n", + " #%d: %uHz, %ubit (ch_map %#x ch_cfg %u interleaving_style %u fmt_cfg %#x)\n", i, fmt->sampling_frequency, fmt->bit_depth, fmt->ch_map, fmt->ch_cfg, fmt->interleaving_style, fmt->fmt_cfg); } -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 14/45] ASoC: SOF: ipc3: Check for upper size limit for the received message
by Sasha Levin 22 Mar '23

22 Mar '23

From: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> [ Upstream commit 989a3e4479177d0f4afab8be1960731bc0ffbbd0 ] The sof_ipc3_rx_msg() checks for minimum size of a new rx message but it is missing the check for upper limit. Corrupted or compromised firmware might be able to take advantage of this to cause out of bounds reads outside of the message area. Reported-by: Curtis Malainey <cujomalainey(a)chromium.org> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Curtis Malainey <curtis(a)malainey.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Link: https://lore.kernel.org/r/20230307114917.5124-1-peter.ujfalusi@linux.intel.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/sof/ipc3.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/ipc3.c b/sound/soc/sof/ipc3.c index 1fef4dcc09368..fde8af5a1f485 100644 --- a/sound/soc/sof/ipc3.c +++ b/sound/soc/sof/ipc3.c @@ -970,8 +970,9 @@ static void sof_ipc3_rx_msg(struct snd_sof_dev *sdev) return; } - if (hdr.size < sizeof(hdr)) { - dev_err(sdev->dev, "The received message size is invalid\n"); + if (hdr.size < sizeof(hdr) || hdr.size > SOF_IPC_MSG_MAX_SIZE) { + dev_err(sdev->dev, "The received message size is invalid: %u\n", + hdr.size); return; } -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 07/45] ASoC: Intel: avs: nau8825: Adjust clock control
by Sasha Levin 22 Mar '23

22 Mar '23

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 6206b2e787da2ed567922c37bb588a44f6fb6705 ] Internal clock shall be adjusted also in cases when DAPM event other than 'ON' is triggered. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20230303134854.2277146-6-amadeuszx.slawinski@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/nau8825.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/soc/intel/avs/boards/nau8825.c b/sound/soc/intel/avs/boards/nau8825.c index 6731d8a490767..49438a67a77c6 100644 --- a/sound/soc/intel/avs/boards/nau8825.c +++ b/sound/soc/intel/avs/boards/nau8825.c @@ -33,15 +33,15 @@ avs_nau8825_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *co return -EINVAL; } - if (!SND_SOC_DAPM_EVENT_ON(event)) { + if (SND_SOC_DAPM_EVENT_ON(event)) + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_MCLK, 24000000, + SND_SOC_CLOCK_IN); + else ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return ret; - } - } + if (ret < 0) + dev_err(card->dev, "Set sysclk failed: %d\n", ret); - return 0; + return ret; } static const struct snd_kcontrol_new card_controls[] = { -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 06/45] ASoC: Intel: avs: ssm4567: Remove nau8825 bits
by Sasha Levin 22 Mar '23

22 Mar '23

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 933de2d127281731166cf2880fa1e23c5a0f7faa ] Some of the nau8825 clock control got into the ssm4567, remove it. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20230303134854.2277146-5-amadeuszx.slawinski@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/ssm4567.c | 31 ---------------------------- 1 file changed, 31 deletions(-) diff --git a/sound/soc/intel/avs/boards/ssm4567.c b/sound/soc/intel/avs/boards/ssm4567.c index c5db696127624..2b7f5ad92aca7 100644 --- a/sound/soc/intel/avs/boards/ssm4567.c +++ b/sound/soc/intel/avs/boards/ssm4567.c @@ -15,7 +15,6 @@ #include <sound/soc-acpi.h> #include "../../../codecs/nau8825.h" -#define SKL_NUVOTON_CODEC_DAI "nau8825-hifi" #define SKL_SSM_CODEC_DAI "ssm4567-hifi" static struct snd_soc_codec_conf card_codec_conf[] = { @@ -34,41 +33,11 @@ static const struct snd_kcontrol_new card_controls[] = { SOC_DAPM_PIN_SWITCH("Right Speaker"), }; -static int -platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *control, int event) -{ - struct snd_soc_dapm_context *dapm = w->dapm; - struct snd_soc_card *card = dapm->card; - struct snd_soc_dai *codec_dai; - int ret; - - codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); - if (!codec_dai) { - dev_err(card->dev, "Codec dai not found\n"); - return -EINVAL; - } - - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_MCLK, 24000000, - SND_SOC_CLOCK_IN); - if (ret < 0) - dev_err(card->dev, "set sysclk err = %d\n", ret); - } else { - ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); - if (ret < 0) - dev_err(card->dev, "set sysclk err = %d\n", ret); - } - - return ret; -} - static const struct snd_soc_dapm_widget card_widgets[] = { SND_SOC_DAPM_SPK("Left Speaker", NULL), SND_SOC_DAPM_SPK("Right Speaker", NULL), SND_SOC_DAPM_SPK("DP1", NULL), SND_SOC_DAPM_SPK("DP2", NULL), - SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), }; static const struct snd_soc_dapm_route card_base_routes[] = { -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 05/45] ASoC: Intel: avs: rt5682: Explicitly define codec format
by Sasha Levin 22 Mar '23

22 Mar '23

From: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> [ Upstream commit d24dbc865c2bd5946bef62bb862a65df092dfc79 ] rt5682 is headset codec configured in 48000/2/S24_LE format regardless of front end format, so force it to be so. Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20230303134854.2277146-4-amadeuszx.slawinski@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/rt5682.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/sound/soc/intel/avs/boards/rt5682.c b/sound/soc/intel/avs/boards/rt5682.c index 473e9fe5d0bf7..b2c2ba93dcb56 100644 --- a/sound/soc/intel/avs/boards/rt5682.c +++ b/sound/soc/intel/avs/boards/rt5682.c @@ -169,6 +169,27 @@ static const struct snd_soc_ops avs_rt5682_ops = { .hw_params = avs_rt5682_hw_params, }; +static int +avs_rt5682_be_fixup(struct snd_soc_pcm_runtime *runtime, struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate, *channels; + struct snd_mask *fmt; + + rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); + fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + + /* The ADSP will convert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSPN to 24 bit */ + snd_mask_none(fmt); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); + + return 0; +} + static int avs_create_dai_link(struct device *dev, const char *platform_name, int ssp_port, struct snd_soc_dai_link **dai_link) { @@ -201,6 +222,7 @@ static int avs_create_dai_link(struct device *dev, const char *platform_name, in dl->id = 0; dl->init = avs_rt5682_codec_init; dl->exit = avs_rt5682_codec_exit; + dl->be_hw_params_fixup = avs_rt5682_be_fixup; dl->ops = &avs_rt5682_ops; dl->nonatomic = 1; dl->no_pcm = 1; -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 04/45] ASoC: Intel: avs: da7219: Explicitly define codec format
by Sasha Levin 22 Mar '23

22 Mar '23

From: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> [ Upstream commit 61f368624fe4d0c25c6e9c917574b8ace51d776e ] da7219 is headset codec configured in 48000/2/S24_LE format regardless of front end format, so force it to be so. Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20230303134854.2277146-3-amadeuszx.slawinski@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/da7219.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/sound/soc/intel/avs/boards/da7219.c b/sound/soc/intel/avs/boards/da7219.c index acd43b6108e99..1a1d572cc1d02 100644 --- a/sound/soc/intel/avs/boards/da7219.c +++ b/sound/soc/intel/avs/boards/da7219.c @@ -117,6 +117,26 @@ static void avs_da7219_codec_exit(struct snd_soc_pcm_runtime *rtd) snd_soc_component_set_jack(asoc_rtd_to_codec(rtd, 0)->component, NULL, NULL); } +static int +avs_da7219_be_fixup(struct snd_soc_pcm_runtime *runrime, struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate, *channels; + struct snd_mask *fmt; + + rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); + fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + + /* The ADSP will convert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP0 to 24 bit */ + snd_mask_none(fmt); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); + return 0; +} + static int avs_create_dai_link(struct device *dev, const char *platform_name, int ssp_port, struct snd_soc_dai_link **dai_link) { @@ -148,6 +168,7 @@ static int avs_create_dai_link(struct device *dev, const char *platform_name, in dl->num_platforms = 1; dl->id = 0; dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; + dl->be_hw_params_fixup = avs_da7219_be_fixup; dl->init = avs_da7219_codec_init; dl->exit = avs_da7219_codec_exit; dl->nonatomic = 1; -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 03/45] ASoC: Intel: avs: max98357a: Explicitly define codec format
by Sasha Levin 22 Mar '23

22 Mar '23

From: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> [ Upstream commit d16c893425d07ada1fdd817ec06d322efcf69480 ] max98357a is speaker codec configured in 48000/2/S16_LE format regardless of front end format, so force it to be so. Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20230303134854.2277146-2-amadeuszx.slawinski@linu… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/max98357a.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/sound/soc/intel/avs/boards/max98357a.c b/sound/soc/intel/avs/boards/max98357a.c index 921f42caf7e09..183123d08c5a3 100644 --- a/sound/soc/intel/avs/boards/max98357a.c +++ b/sound/soc/intel/avs/boards/max98357a.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/soc-acpi.h> #include <sound/soc-dapm.h> @@ -24,6 +25,26 @@ static const struct snd_soc_dapm_route card_base_routes[] = { { "Spk", NULL, "Speaker" }, }; +static int +avs_max98357a_be_fixup(struct snd_soc_pcm_runtime *runrime, struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate, *channels; + struct snd_mask *fmt; + + rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); + fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + + /* The ADSP will convert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP0 to 16 bit */ + snd_mask_none(fmt); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); + return 0; +} + static int avs_create_dai_link(struct device *dev, const char *platform_name, int ssp_port, struct snd_soc_dai_link **dai_link) { @@ -55,6 +76,7 @@ static int avs_create_dai_link(struct device *dev, const char *platform_name, in dl->num_platforms = 1; dl->id = 0; dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; + dl->be_hw_params_fixup = avs_max98357a_be_fixup; dl->nonatomic = 1; dl->no_pcm = 1; dl->dpcm_playback = 1; -- 2.39.2

1 0

[PATCH AUTOSEL 6.2 02/45] ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds
by Sasha Levin 22 Mar '23

22 Mar '23

From: Ravulapati Vishnu Vardhan Rao <quic_visr(a)quicinc.com> [ Upstream commit e5e7e398f6bb7918dab0612eb6991f7bae95520d ] When we run syzkaller we get below Out of Bound. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: dump_backtrace+0x0/0x4c8 show_stack+0x34/0x44 dump_stack_lvl+0xd8/0x118 print_address_description+0x30/0x2d8 kasan_report+0x158/0x198 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf4/0x180 _regmap_read+0xc4/0x278 _regmap_update_bits+0x130/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_digital_mute+0xec/0x140 Actually There is no need to have decimator with 32 bits. By limiting the variable with short type u8 issue is resolved. Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr(a)quicinc.com> Link: https://lore.kernel.org/r/20230304080702.609-1-quic_visr@quicinc.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/lpass-tx-macro.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index 2449a2df66df0..8facdb922f076 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -242,7 +242,7 @@ enum { struct tx_mute_work { struct tx_macro *tx; - u32 decimator; + u8 decimator; struct delayed_work dwork; }; @@ -635,7 +635,7 @@ static int tx_macro_mclk_enable(struct tx_macro *tx, return 0; } -static bool is_amic_enabled(struct snd_soc_component *component, int decimator) +static bool is_amic_enabled(struct snd_soc_component *component, u8 decimator) { u16 adc_mux_reg, adc_reg, adc_n; @@ -849,7 +849,7 @@ static int tx_macro_enable_dec(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - unsigned int decimator; + u8 decimator; u16 tx_vol_ctl_reg, dec_cfg_reg, hpf_gate_reg, tx_gain_ctl_reg; u8 hpf_cut_off_freq; int hpf_delay = TX_MACRO_DMIC_HPF_DELAY_MS; @@ -1064,7 +1064,8 @@ static int tx_macro_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct snd_soc_component *component = dai->component; - u32 decimator, sample_rate; + u32 sample_rate; + u8 decimator; int tx_fs_rate; struct tx_macro *tx = snd_soc_component_get_drvdata(component); @@ -1128,7 +1129,7 @@ static int tx_macro_digital_mute(struct snd_soc_dai *dai, int mute, int stream) { struct snd_soc_component *component = dai->component; struct tx_macro *tx = snd_soc_component_get_drvdata(component); - u16 decimator; + u8 decimator; /* active decimator not set yet */ if (tx->active_decimator[dai->id] == -1) -- 2.39.2

1 0

[PATCH] ASoC: SOF: ipc4: Ensure DSP is in D0I0 during sof_ipc4_set_get_data()
by Peter Ujfalusi 22 Mar '23

22 Mar '23

From: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> The set_get_data() IPC op bypasses the check for the no_pm flag as done with the regular IPC tx_msg op. Since set_get_data should be performed when the DSP is in D0I0, set the DSP power state to D0I0 before sending the IPC's in sof_ipc4_set_get_data(). Fixes: ceb89acc4dc8 ("ASoC: SOF: ipc4: Add support for mandatory message handling functionality") Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/sof/ipc4.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/sof/ipc4.c b/sound/soc/sof/ipc4.c index 8ede4b952997..246b56d24a6f 100644 --- a/sound/soc/sof/ipc4.c +++ b/sound/soc/sof/ipc4.c @@ -405,6 +405,9 @@ static int sof_ipc4_tx_msg(struct snd_sof_dev *sdev, void *msg_data, size_t msg_ static int sof_ipc4_set_get_data(struct snd_sof_dev *sdev, void *data, size_t payload_bytes, bool set) { + const struct sof_dsp_power_state target_state = { + .state = SOF_DSP_PM_D0, + }; size_t payload_limit = sdev->ipc->max_payload_size; struct sof_ipc4_msg *ipc4_msg = data; struct sof_ipc4_msg tx = {{ 0 }}; @@ -435,6 +438,11 @@ static int sof_ipc4_set_get_data(struct snd_sof_dev *sdev, void *data, tx.extension |= SOF_IPC4_MOD_EXT_MSG_FIRST_BLOCK(1); + /* ensure the DSP is in D0i0 before sending IPC */ + ret = snd_sof_dsp_set_power_state(sdev, &target_state); + if (ret < 0) + return ret; + /* Serialise IPC TX */ mutex_lock(&sdev->ipc->tx_mutex); -- 2.40.0

2 1

[PATCH v2] ASoC: simple-card: add comment to indicate don't remove platforms
by Kuninori Morimoto 22 Mar '23

22 Mar '23

Basically CPU and Platform are different Component, but if CPU is using soc-generic-dmaengine-pcm, same dev will be shared between CPU and Platform, and Simple Card had been supporting it. When we focus to clean up Simple Card driver, we tend to remove platforms if no Platform was selected, but it is wrong because of above reasons. This patch adds comment why we shouldn't remove platforms. In case of CPU is not using soc-generic-dmaengine-pcm, CPU and Platform will be duplicated, but it will be ignored by snd_soc_rtd_add_component(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- v1 -> v2 - add +1 comment on asoc_simple_canonicalize_platform() sound/soc/generic/audio-graph-card.c | 13 ++++++++++++- sound/soc/generic/audio-graph-card2.c | 17 +++++++++++++++++ sound/soc/generic/simple-card-utils.c | 11 ++++++++++- sound/soc/generic/simple-card.c | 22 +++++++++++++++++++++- 4 files changed, 60 insertions(+), 3 deletions(-) diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index d788f5f23a8a..4e85536a1b26 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -613,10 +613,16 @@ static int graph_count_noml(struct asoc_simple_priv *priv, return -EINVAL; } + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = 1; - li->num[li->link].codecs = 1; li->num[li->link].platforms = 1; + li->num[li->link].codecs = 1; + li->link += 1; /* 1xCPU-Codec */ dev_dbg(dev, "Count As Normal\n"); @@ -637,6 +643,11 @@ static int graph_count_dpcm(struct asoc_simple_priv *priv, } if (li->cpu) { + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = 1; li->num[li->link].platforms = 1; diff --git a/sound/soc/generic/audio-graph-card2.c b/sound/soc/generic/audio-graph-card2.c index 259544f64df9..d145b74d41e4 100644 --- a/sound/soc/generic/audio-graph-card2.c +++ b/sound/soc/generic/audio-graph-card2.c @@ -1046,8 +1046,14 @@ static int graph_count_normal(struct asoc_simple_priv *priv, * => lnk: port { endpoint { .. }; }; * }; */ + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = li->num[li->link].platforms = graph_counter(cpu_port); + li->num[li->link].codecs = graph_counter(codec_port); of_node_put(cpu_ep); @@ -1079,6 +1085,11 @@ static int graph_count_dpcm(struct asoc_simple_priv *priv, */ if (asoc_graph_is_ports0(lnk)) { + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = graph_counter(rport); /* FE */ li->num[li->link].platforms = graph_counter(rport); } else { @@ -1113,8 +1124,14 @@ static int graph_count_c2c(struct asoc_simple_priv *priv, * }; * }; */ + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = li->num[li->link].platforms = graph_counter(codec0); + li->num[li->link].codecs = graph_counter(codec1); of_node_put(ports); diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index 56552a616f21..34a9b91e676f 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -638,7 +638,16 @@ EXPORT_SYMBOL_GPL(asoc_simple_dai_init); void asoc_simple_canonicalize_platform(struct snd_soc_dai_link_component *platforms, struct snd_soc_dai_link_component *cpus) { - /* Assumes platform == cpu */ + /* + * Assumes Platform == CPU + * + * Some CPU might be using soc-generic-dmaengine-pcm. This means CPU and Platform + * are different Component, but are sharing same component->dev. + * + * Let's assume Platform is same as CPU if it doesn't identify Platform on DT. + * see + * simple-card.c :: simple_count_noml() + */ if (!platforms->of_node) platforms->of_node = cpus->of_node; } diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index e98932c16754..fcd6c44f89f6 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -509,10 +509,25 @@ static int simple_count_noml(struct asoc_simple_priv *priv, return -EINVAL; } + /* + * DON'T REMOVE platforms + * + * Some CPU might be using soc-generic-dmaengine-pcm. This means CPU and Platform + * are different Component, but are sharing same component->dev. + * Simple Card had been supported it without special Platform selection. + * We need platforms here. + * + * In case of no Platform, it will be Platform == CPU, but Platform will be + * ignored by snd_soc_rtd_add_component(). + * + * see + * simple-card-utils.c :: asoc_simple_canonicalize_platform() + */ li->num[li->link].cpus = 1; - li->num[li->link].codecs = 1; li->num[li->link].platforms = 1; + li->num[li->link].codecs = 1; + li->link += 1; return 0; @@ -531,6 +546,11 @@ static int simple_count_dpcm(struct asoc_simple_priv *priv, } if (li->cpu) { + /* + * DON'T REMOVE platforms + * see + * simple_count_noml() + */ li->num[li->link].cpus = 1; li->num[li->link].platforms = 1; -- 2.25.1

2 1

[PATCH] ASoC: Intel: sof_rt5682: Remove conditional dpcm_capture setting
by Peter Ujfalusi 22 Mar '23

22 Mar '23

From: Yong Zhi <yong.zhi(a)intel.com> The dpcm_capture is set unconditionally, we can drop the conditional setting of it. Signed-off-by: Yong Zhi <yong.zhi(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/intel/boards/sof_rt5682.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c index 2eec32846078..76ee2e35e1ef 100644 --- a/sound/soc/intel/boards/sof_rt5682.c +++ b/sound/soc/intel/boards/sof_rt5682.c @@ -793,7 +793,6 @@ static struct snd_soc_dai_link *sof_card_dai_links_create(struct device *dev, } links[id].init = max_98390_spk_codec_init; links[id].ops = &max_98390_ops; - links[id].dpcm_capture = 1; } else { max_98357a_dai_link(&links[id]); -- 2.40.0

2 1

[PATCH 0/2] ASoC: Intel: sof_rt5682: Updates for MTL BT offload
by Peter Ujfalusi 22 Mar '23

22 Mar '23

Hi, Enable BT offload for Rex variants and RVP. Regards, Peter --- Uday M Bhat (2): ASoC: Intel: sof_rt5682: Update BT offload config for Rex ASoC: Intel: sof_rt5682: Update BT offload config for MTL RVP sound/soc/intel/boards/sof_rt5682.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) -- 2.40.0

2 3

[PATCH] ASoC: tegra: remove unneeded semicolon
by Jiapeng Chong 22 Mar '23

22 Mar '23

./sound/soc/tegra/tegra_asoc_machine.c:206:3-4: Unneeded semicolon. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4583 Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> --- sound/soc/tegra/tegra_asoc_machine.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/tegra/tegra_asoc_machine.c b/sound/soc/tegra/tegra_asoc_machine.c index c2aaa496468c..f5092b410926 100644 --- a/sound/soc/tegra/tegra_asoc_machine.c +++ b/sound/soc/tegra/tegra_asoc_machine.c @@ -203,7 +203,7 @@ int tegra_asoc_machine_init(struct snd_soc_pcm_runtime *rtd) "nvidia,coupled-mic-hp-det")) { tegra_machine_mic_jack_gpio.desc = machine->gpiod_hp_det; tegra_machine_mic_jack_gpio.jack_status_check = coupled_mic_hp_check; - }; + } err = snd_soc_jack_add_gpios(&tegra_machine_mic_jack, 1, &tegra_machine_mic_jack_gpio); -- 2.20.1.7.g153144c

2 1

[PATCH] ALSA: hda/realtek: Fix support for Dell Precision 3260
by Jaroslav Kysela 22 Mar '23

22 Mar '23

Unfortunately, in commit 5911d78fabbb a wrong codec patch was selected. The model=alc283-dac-wcaps is equivalent to ALC283_FIXUP_CHROME_BOOK not ALC295_FIXUP_CHROME_BOOK. Fixes: 5911d78fabbb ("ALSA: hda/realtek: Improve support for Dell Precision 3260") Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f09a1d7c1b18..3a304010bc9f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9260,7 +9260,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0a62, "Dell Precision 5560", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x0a9d, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0a9e, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), - SND_PCI_QUIRK(0x1028, 0x0ac9, "Dell Precision 3260", ALC295_FIXUP_CHROME_BOOK), + SND_PCI_QUIRK(0x1028, 0x0ac9, "Dell Precision 3260", ALC283_FIXUP_CHROME_BOOK), SND_PCI_QUIRK(0x1028, 0x0b19, "Dell XPS 15 9520", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x0b1a, "Dell Precision 5570", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x0b37, "Dell Inspiron 16 Plus 7620 2-in-1", ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS), -- 2.39.2

2 1

[PATCH v2 0/3] ASoC: SOF: ipc4/intel: Support for ChainDMA
by Peter Ujfalusi 22 Mar '23

22 Mar '23

Hi, Changes since v1: - Fix missed mutex unlocking in sof_ipc4_widget_free() Reported by Dan Carpenter (thank you!) On a platform when the DSP is in use, we cannot select individual links to use or not use the DSP, it is either all or none. On some audio endpoint, like HDMI/DP, it is preferred to not use any processing in DSP to reduce the latency and to allow bytestream pass-through (DTS, DD, etc) IPC4 introduces a new type of end-to-end connection within the DSP which is using the host DMA and link DMA in a single buffer, working back-to-back, passing the received data without looking at it or trying to understand the format, content. This mode reduces the latency and allows non PCM streams to be sent from userspace. The feature is enabled per PCM bases, signalled in topology. Regards, Peter --- *** BLURB HERE *** Jyri Sarha (2): ASoC: SOF: ipc4: Add macros for chain-dma message bits ASoC: SOF: ipc4/intel: Add support for chained DMA Ranjani Sridharan (1): ASoC: SOF: topology: Set pipeline widget before updating IPC structures include/sound/sof/ipc4/header.h | 29 +++++++ include/uapi/sound/sof/tokens.h | 1 + sound/soc/sof/intel/hda-dai-ops.c | 18 ++++- sound/soc/sof/ipc4-pcm.c | 122 +++++++++++++++++++++++++++++- sound/soc/sof/ipc4-topology.c | 122 +++++++++++++++++++++++++++++- sound/soc/sof/ipc4-topology.h | 2 + sound/soc/sof/topology.c | 48 ++++++------ 7 files changed, 310 insertions(+), 32 deletions(-) -- 2.40.0

3 7

USB-Audio: Add Sony inzone H7/H9 headset default/HiFi usecase
by GitHub pull_request - opened 22 Mar '23

22 Mar '23

alsa-project/alsa-ucm-conf pull request #293 was opened from laurensmiers: The Sony inzone H7/H9 headset has two usb audio outputs and one usb audio input. One pair of audio output and input is the 'chat' interface which is normally connected to a chat client. The remaining audio ouput is the 'game' interface, which is normally connected to the actual game you're playing. The 'game' interface lists as a separate USB subdevice in alsa. This commit adds the HiFi usecase for the Sony headset which is as follows: - One chat device - One audio output - One audio input - One game device - One audio output Tested with pipewire and pulseaudio, verified with pavucontrol, both devices are listed and audio can be played on both. The audio is mixed in the headset itself. Control wise there isn't much, the only thing that is reported in alsamixer is a volume control for the CAPTURE channel. However, changing the volume of this does not seem to affect the actual audio that is recorded, so I don't see a need to change this when enabling the device. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/293 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/293.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v2 0/3] ASoC: SOF: ipc4/intel: Support for ChainDMA
by Peter Ujfalusi 22 Mar '23

22 Mar '23

Hi, Changes since v1: - Fix missed mutex unlocking in sof_ipc4_widget_free() Reported by Dan Carpenter (thank you!) On a platform when the DSP is in use, we cannot select individual links to use or not use the DSP, it is either all or none. On some audio endpoint, like HDMI/DP, it is preferred to not use any processing in DSP to reduce the latency and to allow bytestream pass-through (DTS, DD, etc) IPC4 introduces a new type of end-to-end connection within the DSP which is using the host DMA and link DMA in a single buffer, working back-to-back, passing the received data without looking at it or trying to understand the format, content. This mode reduces the latency and allows non PCM streams to be sent from userspace. The feature is enabled per PCM bases, signalled in topology. Regards, Peter --- *** BLURB HERE *** Jyri Sarha (2): ASoC: SOF: ipc4: Add macros for chain-dma message bits ASoC: SOF: ipc4/intel: Add support for chained DMA Ranjani Sridharan (1): ASoC: SOF: topology: Set pipeline widget before updating IPC structures include/sound/sof/ipc4/header.h | 29 +++++++ include/uapi/sound/sof/tokens.h | 1 + sound/soc/sof/intel/hda-dai-ops.c | 18 ++++- sound/soc/sof/ipc4-pcm.c | 122 +++++++++++++++++++++++++++++- sound/soc/sof/ipc4-topology.c | 122 +++++++++++++++++++++++++++++- sound/soc/sof/ipc4-topology.h | 2 + sound/soc/sof/topology.c | 48 ++++++------ 7 files changed, 310 insertions(+), 32 deletions(-) -- 2.40.0

1 3

conf: add support for Amlogic AIU and AXG cards
by GitHub pull_request - opened 22 Mar '23

22 Mar '23

alsa-project/alsa-lib pull request #308 was opened from chewitt: This submission adds generic card confs for the Amlogic AIU and AXG audio cards. AIU is used with GXBB/GXL/GXM boards and supports HDMI and hinted S/PDIF output. The AXG conf is used with G12A/G12B/SM1 boards and supports HDMI only output. Hinting S/PDIF support does not work with AXG due to the card always presenting three outputs (with internal routing controlling what they are) so the hint always returns true. This is an AIU device with HDMI and S/PDIF hardware: ``` WP2:~ # aplay -L null Discard all samples (playback) or generate zero samples (capture) default:CARD=WETEKPLAY2 WETEK-PLAY2, Default Audio Device sysdefault:CARD=WETEKPLAY2 WETEK-PLAY2, Default Audio Device iec958:CARD=WETEKPLAY2,DEV=0 WETEK-PLAY2, IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=WETEKPLAY2,DEV=0 WETEK-PLAY2, HDMI Audio Output WP2:~ # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: WETEKPLAY2 [WETEK-PLAY2], device 0: fe.dai-link-0 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: WETEKPLAY2 [WETEK-PLAY2], device 1: fe.dai-link-1 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 ``` This is an AXG device with HDMI only hardware: ``` N2PLUS:~ # aplay -L null Discard all samples (playback) or generate zero samples (capture) default:CARD=ODROIDN2 ODROID-N2, Default Audio Device sysdefault:CARD=ODROIDN2 ODROID-N2, Default Audio Device hdmi:CARD=ODROIDN2,DEV=0 ODROID-N2, HDMI Audio Output N2PLUS:~ # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ODROIDN2 [ODROID-N2], device 0: fe.dai-link-0 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ODROIDN2 [ODROID-N2], device 1: fe.dai-link-1 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ODROIDN2 [ODROID-N2], device 2: fe.dai-link-2 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 ``` The confs have been in use with the Kodi distro LibreELEC for around two years and other distros supporting Amlogic boards on upstream kernels (Armbian, Manjaro, etc.) have borrowed them from our repo too. The prime reason for submitting them is to allow everyone to drop some patches. Although the confs are known-working it would be great if someone with better alsa knowlege than myself could vet them for correctness. ping @jeromebrunet for awareness Request URL : https://github.com/alsa-project/alsa-lib/pull/308 Patch URL : https://github.com/alsa-project/alsa-lib/pull/308.patch Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH v2 0/8] Fix sound on ASUS Transformers
by Svyatoslav Ryhel 22 Mar '23

22 Mar '23

- add quirk for headset detection used by some T30 devices (ASUS Transformers, LG Optimus 4X HD and Vu); - add RT5631 and MAX9808x machine drivers - update bindings --- Changes from v1 - fm34 dropped for re-work - quirk for headset detection and rt5631 bringup splitted - minor adjustments in binding updates - improvement of rt5631 rate asignment --- David Heidelberg (1): dt-bindings: sound: nvidia,tegra-audio: add RT5631 CODEC Svyatoslav Ryhel (7): dt-bindings: sound: nvidia,tegra-audio-common: add coupled-mic-hp-detect property ASoC: tegra: Support coupled mic-hp detection ARM: tegra: transformers: update sound nodes ASoC: tegra: Support RT5631 by machine driver ARM: tegra: transformers: bind RT5631 sound nodes dt-bindings: sound: nvidia,tegra-audio: add MAX9808x CODEC ASoC: tegra: Support MAX9808x by machine driver .../sound/nvidia,tegra-audio-common.yaml | 4 + .../sound/nvidia,tegra-audio-max9808x.yaml | 90 +++++++++++++ .../sound/nvidia,tegra-audio-rt5631.yaml | 85 ++++++++++++ arch/arm/boot/dts/tegra20-asus-tf101.dts | 7 +- arch/arm/boot/dts/tegra30-asus-tf201.dts | 17 +++ arch/arm/boot/dts/tegra30-asus-tf300t.dts | 5 +- arch/arm/boot/dts/tegra30-asus-tf300tg.dts | 17 +++ arch/arm/boot/dts/tegra30-asus-tf700t.dts | 17 +++ .../dts/tegra30-asus-transformer-common.dtsi | 9 +- sound/soc/tegra/Kconfig | 18 +++ sound/soc/tegra/tegra_asoc_machine.c | 125 +++++++++++++++++- 11 files changed, 380 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml -- 2.37.2

2 13

Re: [PATCH v2 1/7] dt-bindings: misc: Add the Lantiq PEF2466 E1/T1/J1 framer
by Rob Herring 22 Mar '23

22 Mar '23

On Mon, Mar 20, 2023 at 10:46:19AM +0100, Herve Codina via Alsa-devel wrote: > Received: by alsa1.perex.cz (Postfix, from userid 50401) id 16494F8027B; > Mon, 20 Mar 2023 10:46:37 +0100 (CET) > X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on alsa1.perex.cz > X-Spam-Level: > X-Spam-Status: No, score=-5.2 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, > DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_HI,SPF_HELO_NONE,SPF_PASS, > URIBL_BLOCKED shortcircuit=no autolearn=ham autolearn_force=no > version=3.4.6 > Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net > [217.70.183.198]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 > (256/256 bits)) (No client certificate requested) by alsa1.perex.cz > (Postfix) with ESMTPS id 3FF5FF80105 for <alsa-devel(a)alsa-project.org>; > Mon, 20 Mar 2023 10:46:22 +0100 (CET) > DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 3FF5FF80105 > Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, > unprotected) header.d=bootlin.com header.i=(a)bootlin.com > header.a=rsa-sha256 header.s=gm1 header.b=m4O7nLC1 > Received: (Authenticated sender: herve.codina(a)bootlin.com) by > mail.gandi.net (Postfix) with ESMTPSA id 40453C0009; Mon, 20 Mar 2023 > 09:46:20 +0000 (UTC) > DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; > t=1679305582; > h=from:from:reply-to:subject:subject:date:date:message-id:message-id: > to:to:cc:cc:mime-version:mime-version:content-type:content-type: > content-transfer-encoding:content-transfer-encoding: > in-reply-to:in-reply-to:references:references; > bh=Ieu9Fv38se4lD4z/BVXUHLrVJL9Tx5iKWZgvO8X+VoY=; > b=m4O7nLC1LPZDOI5eM/hmgqouxdkin2veA6CvJhT9kU9rGQALB3ya2fuybMfDvrkTqqBjEd > j6DAxXMgOKgwuUfEsZsp3BFJpoii00hSaf0r2uIbnnGcUrDGVQqUQVEqv51O6VBqnrViQk > PstlJM0lcE9R/AFASd5D/HQGoYYyRY+NKT7xt8g1Ax23Yk/tUG59LXku/skn/4faSLodnU > vV2ng3VMUcoLuvSMJtdYY3hrXEWqUrW1ZogxAFHJNiKuyOELmqZGmNo4B4yAFOEcqqyano > /f4m/7BtT7X1wwPvGu29gg+0aOFrGQq5kb4UNrMoriSQyKnxPRha8zL3J2Jckw== > Date: Mon, 20 Mar 2023 10:46:19 +0100 > From: Herve Codina <herve.codina(a)bootlin.com> > To: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> > Subject: Re: [PATCH v2 1/7] dt-bindings: misc: Add the Lantiq PEF2466 > E1/T1/J1 framer > Message-ID: <20230320104619.468a304b(a)bootlin.com> > In-Reply-To: <96b01241-d57d-a460-4a8b-9e83eaab24ae(a)linaro.org> > References: <20230316122741.577663-1-herve.codina(a)bootlin.com> > <20230316122741.577663-2-herve.codina(a)bootlin.com> > <96b01241-d57d-a460-4a8b-9e83eaab24ae(a)linaro.org> > Organization: Bootlin > X-Mailer: Claws Mail 4.1.1 (GTK 3.24.37; x86_64-redhat-linux-gnu) > MIME-Version: 1.0 > Content-Type: text/plain; charset=UTF-8 > Content-Transfer-Encoding: quoted-printable > Message-ID-Hash: AJZF4VHU24ASVVBCPRMLJCDG4ZDX55LB > X-Message-ID-Hash: AJZF4VHU24ASVVBCPRMLJCDG4ZDX55LB > X-MailFrom: herve.codina(a)bootlin.com > X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; > loop; banned-address; member-moderation; > header-match-alsa-devel.alsa-project.org-0; > header-match-alsa-devel.alsa-project.org-1; nonmember-moderation; > administrivia; implicit-dest; max-recipients; max-size; news-moderation; > no-subject; digests; suspicious-header > CC: Rob Herring <robh+dt(a)kernel.org>, Krzysztof Kozlowski > <krzysztof.kozlowski+dt(a)linaro.org>, Liam Girdwood <lgirdwood(a)gmail.com>, > Mark Brown <broonie(a)kernel.org>, Derek Kiernan <derek.kiernan(a)xilinx.com>, > Dragan Cvetic <dragan.cvetic(a)xilinx.com>, Arnd Bergmann <arnd(a)arndb.de>, > Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>, Takashi Iwai > <tiwai(a)suse.com>, linux-kernel(a)vger.kernel.org, > devicetree(a)vger.kernel.org, alsa-devel(a)alsa-project.org, Christophe Leroy > <christophe.leroy(a)csgroup.eu>, Thomas Petazzoni > <thomas.petazzoni(a)bootlin.com> > X-Mailman-Version: 3.3.8 > Precedence: list > List-Id: "Alsa-devel mailing list for ALSA developers - > http://www.alsa-project.org" <alsa-devel.alsa-project.org> > Archived-At: <https://mailman.alsa-project.org/hyperkitty/list/alsa-devel@alsa-project.or…> > List-Archive: <https://mailman.alsa-project.org/hyperkitty/list/alsa-devel@alsa-project.or…> > List-Help: <mailto:alsa-devel-request@alsa-project.org?subject=help> > List-Owner: <mailto:alsa-devel-owner@alsa-project.org> > List-Post: <mailto:alsa-devel@alsa-project.org> > List-Subscribe: <mailto:alsa-devel-join@alsa-project.org> > List-Unsubscribe: <mailto:alsa-devel-leave@alsa-project.org> The alsa-devel list doesn't seem to like your emails. The archives (lore) has 2 copies with the 2nd having the original headers in the body. I'm seeing this recently on other senders too. Best I can tell is you sent this as quoted-printable. Rob

2 3

Unlikely big volume range volume range on EMEET webcam
by Pavel Hofman 22 Mar '23

22 Mar '23

Hi, Speaker-webcam eMeet C980 Pro does not play, outputs only silent noise. The digital volume seems to be down. dmesg: [22406.805176] input: HD Webcam eMeet C980 Pro: HD We as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-7/1-7.1/1-7.1:1.0/input/input27 [22406.829048] usb 1-7.1: current rate 16000 is different from the runtime rate 48000 [22406.933044] usb 1-7.1: Warning! Unlikely big volume range (=10240), cval->res is probably wrong. [22406.933048] usb 1-7.1: [5] FU [PCM Playback Volume] ch = 1, val = -7168/3072/1 [22407.001043] usb 1-7.1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [22407.001047] usb 1-7.1: [6] FU [Headset Capture Volume] ch = 1, val = -1536/1536/1 amixer contents: ..... numid=3,iface=MIXER,name='PCM Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on numid=4,iface=MIXER,name='PCM Playback Volume' ; type=INTEGER,access=rw---R--,values=1,min=0,max=10240,step=0 : values=10240 | dBminmax-min=-28.00dB,max=12.00dB numid=5,iface=MIXER,name='Headset Capture Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on numid=6,iface=MIXER,name='Headset Capture Volume' ; type=INTEGER,access=rw---R--,values=1,min=0,max=3072,step=0 : values=3072 | dBminmax-min=-6.00dB,max=6.00dB ..... I tried playing with csetting numid=4 to various values, no effect. Please what should be the correct min,max,res in volume_control_quirks for the 'PCM Playback Volume' control for such device? Capture seems to be OK (maybe the range should be adjusted too for the complete range of control) Also, the device does not seem to get the current rate correctly, but IIUC that should not have any adverse effect (not marked with QUIRK_FLAG_GET_SAMPLE_RATE yet): [22407.178045] usb 1-7.1: current rate 16000 is different from the runtime rate 48000 [22407.199046] usb 1-7.1: current rate 16000 is different from the runtime rate 48000 [22407.220045] usb 1-7.1: current rate 16000 is different from the runtime rate 48000 [22407.282044] usb 1-7.1: current rate 16000 is different from the runtime rate 48000 [22811.235851] usb 1-7.1: current rate 16000 is different from the runtime rate 48000 [22829.335494] usb 1-7.1: current rate 16000 is different from the runtime rate 48000 cat /proc/asound/card2/stream0 SHENZHEN EMEET TECHNOLOGY CO., LTD. HD Webcam eMeet C980 Pro at usb-0000:02:00. : USB Audio Playback: Status: Stop Interface 3 Altset 1 Format: S16_LE Channels: 1 Endpoint: 0x01 (1 OUT) (ADAPTIVE) Rates: 48000 Data packet interval: 1000 us Bits: 16 Channel map: FL Capture: Status: Stop Interface 4 Altset 1 Format: S16_LE Channels: 1 Endpoint: 0x83 (3 IN) (SYNC) Rates: 16000 Data packet interval: 1000 us Bits: 16 alsa-info dump: http://alsa-project.org/db/?f=7af42635d88e858818932578aa8445810916a947 lsusb -v -d 328f:1912 attached. Thank you very much for any hints. Best regards, Pavel.

2 2

Re: [PATCH 1/4] ASoC: es8316: Enable support for S32 LE format and MCLK div by 2
by 沈一超 22 Mar '23

22 Mar '23

> > > This introduces a DT property but there's no documentation for it, but I > > > don't see why we'd want this in the bindings - the driver should be able > > > to tell from the input clock rate and required output/internal clocks if > > > it needs to divide MCLK. > > > The problem here is that I have no knowledge what is the maximum MCLK > > that the codec accepts. According to the datasheet the maximum supported > > frequency of MCLK is 51.2 Mhz. But this doesn't seem to be the case in > > practice since a MCLK of 48Mhz causes noises in the sound output. > > The idea to divide the MCLK by 2 was proposed by a Everest Semiconductor > > engineer. > > So I don't know how to make this generic enough to be activated from the > > codec driver. > > The usual constraint would be that MCLK can be at most some multiple of > LRCLK or something similar (are all the other dividers in the chip set > sensibly for the full scale MCLK?). In any case you're clearly aware of > a specific case where it needs to be divided down which can be > identified even if you're concerned about dividing down for other cases. In practice no dt property is needed. We support 48M mclk, based on enabling MCLK divided by 2 for mclk greater than 24M . You may want code like this: /* enabling mclk divided by 2 for mclk > 24M */ if (es8316->sysclk > 24000000) mclk_div_option = true;

1 0

[PATCH] ASoC: simple-card: add comment to indicate don't remove platforms
by Kuninori Morimoto 22 Mar '23

22 Mar '23

Basically CPU and Platform are different Component, but if CPU is using soc-generic-dmaengine-pcm, same dev will be shared between CPU and Platform, and Simple Card had been supporting it. When we focus to clean up Simple Card driver, we tend to remove platforms if no Platform was selected, but it is wrong because of above reasons. This patch adds comment why we shouldn't remove platforms. In case of CPU is not using soc-generic-dmaengine-pcm, CPU and Platform will be duplicated, but it will be ignored by snd_soc_rtd_add_component(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/generic/audio-graph-card.c | 13 ++++++++++++- sound/soc/generic/audio-graph-card2.c | 17 +++++++++++++++++ sound/soc/generic/simple-card.c | 19 ++++++++++++++++++- 3 files changed, 47 insertions(+), 2 deletions(-) diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index d788f5f23a8a..4e85536a1b26 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -613,10 +613,16 @@ static int graph_count_noml(struct asoc_simple_priv *priv, return -EINVAL; } + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = 1; - li->num[li->link].codecs = 1; li->num[li->link].platforms = 1; + li->num[li->link].codecs = 1; + li->link += 1; /* 1xCPU-Codec */ dev_dbg(dev, "Count As Normal\n"); @@ -637,6 +643,11 @@ static int graph_count_dpcm(struct asoc_simple_priv *priv, } if (li->cpu) { + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = 1; li->num[li->link].platforms = 1; diff --git a/sound/soc/generic/audio-graph-card2.c b/sound/soc/generic/audio-graph-card2.c index 259544f64df9..d145b74d41e4 100644 --- a/sound/soc/generic/audio-graph-card2.c +++ b/sound/soc/generic/audio-graph-card2.c @@ -1046,8 +1046,14 @@ static int graph_count_normal(struct asoc_simple_priv *priv, * => lnk: port { endpoint { .. }; }; * }; */ + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = li->num[li->link].platforms = graph_counter(cpu_port); + li->num[li->link].codecs = graph_counter(codec_port); of_node_put(cpu_ep); @@ -1079,6 +1085,11 @@ static int graph_count_dpcm(struct asoc_simple_priv *priv, */ if (asoc_graph_is_ports0(lnk)) { + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = graph_counter(rport); /* FE */ li->num[li->link].platforms = graph_counter(rport); } else { @@ -1113,8 +1124,14 @@ static int graph_count_c2c(struct asoc_simple_priv *priv, * }; * }; */ + /* + * DON'T REMOVE platforms + * see + * simple-card.c :: simple_count_noml() + */ li->num[li->link].cpus = li->num[li->link].platforms = graph_counter(codec0); + li->num[li->link].codecs = graph_counter(codec1); of_node_put(ports); diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index e98932c16754..fc044978e057 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -509,10 +509,22 @@ static int simple_count_noml(struct asoc_simple_priv *priv, return -EINVAL; } + /* + * DON'T REMOVE platforms + * + * Some CPU might be using soc-generic-dmaengine-pcm. This means CPU and Platform + * are different Component, but are sharing same component->dev. + * Simple Card had been supported it without special Platform selection. + * We need platforms here. + * + * In case of no Platform, it will be Platform == CPU, but Platform will be + * ignored by snd_soc_rtd_add_component(). + */ li->num[li->link].cpus = 1; - li->num[li->link].codecs = 1; li->num[li->link].platforms = 1; + li->num[li->link].codecs = 1; + li->link += 1; return 0; @@ -531,6 +543,11 @@ static int simple_count_dpcm(struct asoc_simple_priv *priv, } if (li->cpu) { + /* + * DON'T REMOVE platforms + * see + * simple_count_noml() + */ li->num[li->link].cpus = 1; li->num[li->link].platforms = 1; -- 2.25.1

1 1

[PATCH v5] ASoC: tas2781: Add tas2781 driver
by Shenghao Ding 22 Mar '23

22 Mar '23

Create tas2781 driver. Signed-off-by: Shenghao Ding <13916275206(a)139.com> --- Changes in v5: - fixed indentation issues - correct header file in alphabetical order - remove useless initialization - Add comments for lock | Reported-by: kernel test robot <lkp(a)intel.com> | Link: | https://lore.kernel.org/oe-kbuild-all/202303210435.ij3d6YHB-lkp@intel. | com/ - remove unused is_set_glb_mode - remove unused dts_dev_addr_tag | Reported-by: kernel test robot <lkp(a)intel.com> | Link: | https://lore.kernel.org/oe-kbuild-all/202303210419.sTqbh3R4-lkp@intel. | com/ - fixed Using plain integer as NULL pointer Changes to be committed: modified: sound/soc/codecs/Kconfig modified: sound/soc/codecs/Makefile new file: sound/soc/codecs/tas2781-dsp.c new file: sound/soc/codecs/tas2781-dsp.h new file: sound/soc/codecs/tas2781-i2c.c new file: sound/soc/codecs/tas2781.h --- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2781-dsp.c | 2152 ++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2781-dsp.h | 178 +++ sound/soc/codecs/tas2781-i2c.c | 1665 ++++++++++++++++++++++++ sound/soc/codecs/tas2781.h | 169 +++ 6 files changed, 4178 insertions(+) create mode 100644 sound/soc/codecs/tas2781-dsp.c create mode 100644 sound/soc/codecs/tas2781-dsp.h create mode 100644 sound/soc/codecs/tas2781-i2c.c create mode 100644 sound/soc/codecs/tas2781.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 07747565c3b5..e1afe1ced5d7 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -229,6 +229,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2764 imply SND_SOC_TAS2770 imply SND_SOC_TAS2780 + imply SND_SOC_TAS2781 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1637,6 +1638,17 @@ config SND_SOC_TAS2780 Enable support for Texas Instruments TAS2780 high-efficiency digital input mono Class-D audio power amplifiers. +config SND_SOC_TAS2781 + tristate "Texas Instruments TAS2781 speaker amplifier" + depends on I2C + select REGMAP_I2C + select CRC8 + help + Enable support for Texas Instruments TAS2781 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + Note the TAS2781 driver implements a flexible and configurable + algo coff setting, for one, two, even multiple TAS2781 chips. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f1ca18f7946c..5559b9e9cc17 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -262,6 +262,7 @@ snd-soc-tas5805m-objs := tas5805m.o snd-soc-tas6424-objs := tas6424.o snd-soc-tda7419-objs := tda7419.o snd-soc-tas2770-objs := tas2770.o +snd-soc-tas2781-objs := tas2781-i2c.o tas2781-dsp.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -619,6 +620,7 @@ obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o +obj-$(CONFIG_SND_SOC_TAS2781) += snd-soc-tas2781.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2781-dsp.c b/sound/soc/codecs/tas2781-dsp.c new file mode 100644 index 000000000000..22c256237335 --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.c @@ -0,0 +1,2152 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/fs.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/string.h> + +#include "tas2781.h" + +#define ERROR_PRAM_CRCCHK 0x0000000 +#define ERROR_YRAM_CRCCHK 0x0000001 +#define PPC_DRIVER_CRCCHK 0x00000200 + +#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) +#define TAS2781_YRAM_BOOK1 140 +#define TAS2781_YRAM1_PAGE 42 +#define TAS2781_YRAM1_START_REG 88 + +#define TAS2781_YRAM2_START_PAGE 43 +#define TAS2781_YRAM2_END_PAGE 49 +#define TAS2781_YRAM2_START_REG 8 +#define TAS2781_YRAM2_END_REG 127 + +#define TAS2781_YRAM3_PAGE 50 +#define TAS2781_YRAM3_START_REG 8 +#define TAS2781_YRAM3_END_REG 27 + +/*should not include B0_P53_R44-R47 */ +#define TAS2781_YRAM_BOOK2 0 +#define TAS2781_YRAM4_START_PAGE 50 +#define TAS2781_YRAM4_END_PAGE 60 + +#define TAS2781_YRAM5_PAGE 61 +#define TAS2781_YRAM5_START_REG 8 +#define TAS2781_YRAM5_END_REG 27 + +#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 +#define MAIN_ALL_DEVICES_1X 0x01 +#define MAIN_DEVICE_A_1X 0x02 +#define MAIN_DEVICE_B_1X 0x03 +#define MAIN_DEVICE_C_1X 0x04 +#define MAIN_DEVICE_D_1X 0x05 +#define COEFF_DEVICE_A_1X 0x12 +#define COEFF_DEVICE_B_1X 0x13 +#define COEFF_DEVICE_C_1X 0x14 +#define COEFF_DEVICE_D_1X 0x15 +#define PRE_DEVICE_A_1X 0x22 +#define PRE_DEVICE_B_1X 0x23 +#define PRE_DEVICE_C_1X 0x24 +#define PRE_DEVICE_D_1X 0x25 + +struct tas_crc { + unsigned char offset; + unsigned char len; +}; + +const char deviceNumber[TASDEVICE_DSP_TAS_MAX_DEVICE] = { + 1, 2, 1, 2, 1, 1, 0, 2, 4, 3, 1, 2, 3, 4 +}; + +static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + block->type = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], + data[offset + 3]); + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: PChkSumPresent error\n", __func__); + offset = -1; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnPChkSum error\n", __func__); + offset = -1; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: YChkSumPresent error\n", __func__); + offset = -1; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnYChkSum error\n", __func__); + offset = -1; + goto out; + } + block->ychksum = data[offset]; + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: blk_size error\n", __func__); + offset = -1; + goto out; + } + block->blk_size = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); + offset = -1; + goto out; + } + block->nr_subblocks = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + block->data = kzalloc(block->blk_size, GFP_KERNEL); + if (block->data == NULL) { + offset = -1; + goto out; + } + memcpy(block->data, &data[offset], block->blk_size); + offset += block->blk_size; +out: + return offset; +} + +static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = fmw->data; + unsigned int nr_block; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + img_data->nr_blk = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], data[offset + 3]); + offset += 4; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (img_data->dev_blks == NULL) { + dev_err(tas_fmw->dev, "%s: FW memory failed!\n", __func__); + goto out; + } + + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + offset = fw_parse_block_data_kernel(tas_fmw, + &(img_data->dev_blks[nr_block]), fmw, offset); + if (offset < 0) { + offset = -1; + goto out; + } + } +out: + return offset; +} + +static int fw_parse_program_data_kernel( + struct tasdevice_priv *tas_dev, struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned int nr_program; + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -1; + goto out; + } + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: AppMode error\n", __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "PDMI2SMode err\n"); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: ISnsPD error\n", __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: VSnsPD error\n", __func__); + offset = -1; + goto out; + } + offset++; + //skip 3-byte reserved + offset += 3; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: PowerLDG err\n", __func__); + offset = -1; + goto out; + } + offset++; + + offset = fw_parse_data_kernel(tas_fmw, &(program->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_configuration_data_kernel( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + unsigned int nr_conf; + struct tasdevice_config *config; + + for (nr_conf = 0; nr_conf < tas_fmw->nr_configurations; nr_conf++) { + config = &(tas_fmw->configs[nr_conf]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -1; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "orientation err\n"); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Devices error\n", __func__); + offset = -1; + goto out; + } + offset += 1; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: Program error\n", __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "SamplingRate err\n"); + offset = -1; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLSrc error\n", __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: FsRate error\n", __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLRate err\n", __func__); + offset = -1; + goto out; + } + offset += 4; + offset = fw_parse_data_kernel(tas_fmw, + &(config->dev_data), fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_variable_header_kernel( + struct tasdevice_priv *tas_dev, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + const unsigned char *buf = fmw->data; + struct tasdevice_prog *program; + struct tasdevice_config *config; + unsigned int nr_program, nr_configs; + unsigned short max_confs; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device_family = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "ERROR:%s:not TAS device\n", __func__); + offset = -1; + goto out; + } + offset += 2; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDevice error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "Not support dev %d\n", fw_hdr->device); + offset = -1; + goto out; + } + offset += 2; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin dismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, tas_dev->ndev); + offset = -1; + goto out; + } + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPrograms error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_programs = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + if (tas_fmw->nr_programs == 0 || tas_fmw->nr_programs > + TASDEVICE_MAXPROGRAM_NUM_KERNEL) { + dev_err(tas_dev->dev, "%s: mnPrograms is invalid\n", __func__); + offset = -1; + goto out; + } + + if (offset + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { + dev_err(tas_dev->dev, "%s: mpPrograms error\n", __func__); + offset = -1; + goto out; + } + + tas_fmw->programs = kcalloc(tas_fmw->nr_programs, + sizeof(struct tasdevice_prog), GFP_KERNEL); + if (tas_fmw->programs == NULL) { + offset = -1; + goto out; + } + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + program->prog_size = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + } + offset += (4 * (5 - nr_program)); + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: Configurations error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + max_confs = (fw_hdr->ndev >= 4) ? + TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS : + TASDEVICE_MAXCONFIG_NUM_KERNEL; + if (tas_fmw->nr_configurations == 0 || + tas_fmw->nr_configurations > max_confs) { + dev_err(tas_dev->dev, "%s: Conf is invalid\n", __func__); + offset = -1; + goto out; + } + + if (offset + 4 * max_confs > fmw->size) { + dev_err(tas_dev->dev, "%s: mpConfigurations err\n", __func__); + offset = -1; + goto out; + } + + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + if (tas_fmw->configs == NULL) { + offset = -1; + goto out; + } + + for (nr_configs = 0; nr_configs < tas_fmw->nr_programs; + nr_configs++) { + config = + &(tas_fmw->configs[nr_configs]); + config->cfg_size = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + } + + offset += (4 * (max_confs - nr_configs)); +out: + return offset; +} + +static int tasdevice_load_block_kernel( + struct tasdevice_priv *tasdevice, struct tasdev_blk *block) +{ + unsigned char *data = block->data; + unsigned int i, length; + const unsigned int blk_size = block->blk_size; + unsigned char dev_idx = 0; + struct tasdevice_dspfw_hdr *fw_hdr = &(tasdevice->fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + + if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + switch (block->type) { + case MAIN_ALL_DEVICES_1X: + dev_idx = 0|0x80; + break; + case MAIN_DEVICE_A_1X: + dev_idx = 1|0x80; + break; + case COEFF_DEVICE_A_1X: + case PRE_DEVICE_A_1X: + dev_idx = 1|0xC0; + break; + case MAIN_DEVICE_B_1X: + dev_idx = 2|0x80; + break; + case COEFF_DEVICE_B_1X: + case PRE_DEVICE_B_1X: + dev_idx = 2|0xC0; + break; + case MAIN_DEVICE_C_1X: + dev_idx = 3|0x80; + break; + case COEFF_DEVICE_C_1X: + case PRE_DEVICE_C_1X: + dev_idx = 3|0xC0; + break; + case MAIN_DEVICE_D_1X: + dev_idx = 4|0x80; + break; + case COEFF_DEVICE_D_1X: + case PRE_DEVICE_D_1X: + dev_idx = 4|0xC0; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } else { + switch (block->type) { + case MAIN_ALL_DEVICES: + dev_idx = 0|0x80; + break; + case MAIN_DEVICE_A: + dev_idx = 1|0x80; + break; + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + dev_idx = 1|0xC0; + break; + case MAIN_DEVICE_B: + dev_idx = 2|0x80; + break; + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + dev_idx = 2|0xC0; + break; + case MAIN_DEVICE_C: + dev_idx = 3|0x80; + break; + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + dev_idx = 3|0xC0; + break; + case MAIN_DEVICE_D: + dev_idx = 4|0x80; + break; + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + dev_idx = 4|0xC0; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } + + for (i = 0, length = 0; i < block->nr_subblocks; i++) { + int rc = tasdevice_process_block(tasdevice, data + length, + dev_idx, blk_size - length); + if (rc < 0) { + dev_err(tasdevice->dev, + "%s: ERROR:%u %u sublock write error\n", + __func__, length, blk_size); + break; + } + length += (unsigned int)rc; + if (blk_size < length) { + dev_err(tasdevice->dev, + "%s: ERROR:%u %u out of bounary\n", + __func__, length, blk_size); + break; + } + } + + return 0; +} + +static int fw_parse_variable_header_git(struct tasdevice_priv + *tas_dev, const struct firmware *fmw, int offset) +{ + const unsigned char *buf = fmw->data; + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + int len = strlen((char *)&buf[offset]); + + len++; + + if (offset + len > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + + offset += len; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "ERROR:%s: not TAS device\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "Not support dev %d\n", fw_hdr->device); + offset = -1; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin dismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, + tas_dev->ndev); + offset = -1; + } + +out: + return offset; +} + +static int fw_parse_variable_hdr_cal(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *buf = fmw->data; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + int len = strlen((char *)&buf[offset]); + + len++; + + if (offset + len > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + + offset += len; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDeviceFamily error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "ERROR:%s: not TAS device\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDevice error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "Not support dev %d\n", fw_hdr->device); + offset = -1; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != 1) { + dev_err(tas_dev->dev, + "%s: calbin must be 1, but currently ndev(%u)\n", + __func__, fw_hdr->ndev); + offset = -1; + } + +out: + return offset; +} + +static inline void tas2781_clear_calfirmware(struct tasdevice_fw + *tas_fmw) +{ + int i; + unsigned int blks; + + if (tas_fmw->calibrations) { + struct tasdevice_calibration *calibration; + + for (i = 0; i < tas_fmw->nr_calibrations; i++) { + calibration = &(tas_fmw->calibrations[i]); + if (calibration) { + struct tasdevice_data *im = + &(calibration->dev_data); + + if (im->dev_blks) { + struct tasdev_blk *block; + + for (blks = 0; blks < im->nr_blk; + blks++) { + block = &(im->dev_blks[blks]); + kfree(block->data); + } + kfree(im->dev_blks); + } + } + } + kfree(tas_fmw->calibrations); + } + kfree(tas_fmw); +} + +static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnType error\n", __func__); + offset = -1; + goto out; + } + block->type = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= + PPC_DRIVER_CRCCHK) { + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "PChkSumPresent error\n"); + offset = -1; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: PChkSum error\n", __func__); + offset = -1; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "YChkSumPresent error\n"); + offset = -1; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: YChkSum error\n", __func__); + offset = -1; + goto out; + } + block->ychksum = data[offset]; + offset++; + } else { + block->is_pchksum_present = 0; + block->is_ychksum_present = 0; + } + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnCommands error\n", __func__); + offset = -1; + goto out; + } + block->nr_cmds = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + n = block->nr_cmds * 4; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, + "%s: File Size(%lu) error offset = %d n = %d\n", + __func__, (unsigned long)fmw->size, offset, n); + offset = -1; + goto out; + } + block->data = kmemdup(&data[offset], n, GFP_KERNEL); + if (block->data == NULL) { + offset = -1; + goto out; + } + offset += n; +out: + return offset; +} + +static int fw_parse_data(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = (unsigned char *)fmw->data; + int n; + unsigned int nr_block; + + if (offset + 64 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mpName error\n", __func__); + n = -1; + goto out; + } + memcpy(img_data->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, "%s: mpDescription error\n", __func__); + offset = -1; + goto out; + } + offset += n; + + if (offset + 2 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnBlocks error\n", __func__); + offset = -1; + goto out; + } + img_data->nr_blk = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (img_data->dev_blks == NULL) { + dev_err(tas_fmw->dev, "%s: FW memory failed!\n", __func__); + goto out; + } + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + offset = fw_parse_block_data(tas_fmw, + &(img_data->dev_blks[nr_block]), fmw, offset); + if (offset < 0) { + offset = -1; + goto out; + } + } +out: + return offset; +} + +static int fw_parse_calibration_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + unsigned int n; + unsigned int nr_calibration = 0; + struct tasdevice_calibration *calibration; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnCalibrations error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_calibrations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_calibrations != 1) { + dev_err(tas_dev->dev, + "%s: only support one calibraiton(%d)!\n", + __func__, tas_fmw->nr_calibrations); + goto out; + } + + tas_fmw->calibrations = + kcalloc(tas_fmw->nr_calibrations, + sizeof(struct tasdevice_calibration), GFP_KERNEL); + if (tas_fmw->calibrations == NULL) { + dev_err(tas_dev->dev, "pCalibrations mem failed!\n"); + offset = -1; + goto out; + } + for (nr_calibration = 0; nr_calibration < tas_fmw->nr_calibrations; + nr_calibration++) { + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "pCalibrations error\n"); + offset = -1; + goto out; + } + calibration = &(tas_fmw->calibrations[nr_calibration]); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "pDescription err\n"); + offset = -1; + goto out; + } + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Prog err, offset = %d\n", + __func__, offset); + offset = -1; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Conf err, offset = %d\n", + __func__, offset); + offset = -1; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(calibration->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } + +out: + + return offset; +} + +static int fw_parse_program_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned char *buf = (unsigned char *)fmw->data; + int nr_program; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_programs = SMS_HTONS(buf[offset], buf[offset + 1]); + offset += 2; + + if (tas_fmw->nr_programs == 0) { + /*Not error in calibration Data file, return directly*/ + dev_err(tas_dev->dev, "%s: Programs is null, maybe calbin\n", + __func__); + goto out; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, sizeof(struct tasdevice_prog), + GFP_KERNEL); + if (tas_fmw->programs == NULL) { + offset = -1; + goto out; + } + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + int n = 0; + + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -1; + goto out; + } + offset += 64; + + n = strlen((char *)&buf[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "Description err\n"); + offset = -1; + goto out; + } + + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: AppMode err\n", __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "PDMI2SMode err\n"); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: ISnsPD error\n", __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: VSnsPD error\n", __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: PowerLDG err\n", __func__); + offset = -1; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(program->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_configuration_data( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + unsigned int n_configs; + struct tasdevice_config *config; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_configurations == 0) { + dev_err(tas_dev->dev, "%s: Conf is zero\n", __func__); + //Do not "offset = -1;", because of calbin + goto out; + } + tas_fmw->configs = + kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + + for (n_configs = 0; n_configs < tas_fmw->nr_configurations; + n_configs++) { + config = + &(tas_fmw->configs[n_configs]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size err\n", __func__); + offset = -1; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "Description err\n"); + offset = -1; + goto out; + } + + offset += n; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "Device_orientation err\n"); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: Program err\n", __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "SampleRate err\n"); + offset = -1; + goto out; + } + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLSrc err\n", __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: PLLRate err\n", __func__); + offset = -1; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFsRate err\n", __func__); + offset = -1; + goto out; + } + offset += 2; + + offset = fw_parse_data(tas_fmw, &(config->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_header(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + const unsigned char *buf = (unsigned char *)fmw->data; + const unsigned char magic_number[] = { 0x35, 0x35, 0x35, 0x32 }; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + if (memcmp(&buf[offset], magic_number, 4)) { + dev_err(tas_dev->dev, "%s: Magic num NOT match\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWSize error\n", __func__); + offset = -1; + goto out; + } + fw_fixed_hdr->fwsize = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + if (fw_fixed_hdr->fwsize != fmw->size) { + dev_err(tas_dev->dev, "File size not match, %lu %u", + (unsigned long)fmw->size, fw_fixed_hdr->fwsize); + offset = -1; + goto out; + } + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnChecksum error\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPPCVersion error\n", __func__); + offset = -1; + goto out; + } + fw_fixed_hdr->ppcver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWVersion error\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDriverVersion error\n", __func__); + offset = -1; + goto out; + } + fw_fixed_hdr->drv_ver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnTimeStamp error\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDDCName error\n", __func__); + offset = -1; + goto out; + } + offset += 64; + + out: + return offset; +} + +// Return Code: +// 1 -- the registers are in the inpage yram +// 0 -- the registers are NOT in the inpage yram +static int check_inpage_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + int ret; + + if (book == TAS2781_YRAM_BOOK1) { + if (page == TAS2781_YRAM1_PAGE) { + if (reg >= TAS2781_YRAM1_START_REG) { + cd->offset = reg; + cd->len = len; + ret = 1; + } else if ((reg + len) > TAS2781_YRAM1_START_REG) { + cd->offset = TAS2781_YRAM1_START_REG; + cd->len = + len - (TAS2781_YRAM1_START_REG - reg); + ret = 1; + } else + ret = 0; + } else if (page == TAS2781_YRAM3_PAGE) { + if (reg > TAS2781_YRAM3_END_REG) { + ret = 0; + } else if (reg >= TAS2781_YRAM3_START_REG) { + if ((reg + len) > TAS2781_YRAM3_END_REG) { + cd->offset = reg; + cd->len = + TAS2781_YRAM3_END_REG - reg + 1; + ret = 1; + } else { + cd->offset = reg; + cd->len = len; + ret = 1; + } + } else { + if ((reg + (len-1)) < + TAS2781_YRAM3_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM3_START_REG; + cd->len = + len - (TAS2781_YRAM3_START_REG - reg); + ret = 1; + } + } + } + } else if (book == + TAS2781_YRAM_BOOK2) { + if (page == TAS2781_YRAM5_PAGE) { + if (reg > TAS2781_YRAM5_END_REG) { + ret = 0; + } else if (reg >= TAS2781_YRAM5_START_REG) { + if ((reg + len) > TAS2781_YRAM5_END_REG) { + cd->offset = reg; + cd->len = + TAS2781_YRAM5_END_REG - reg + 1; + ret = 1; + } else { + cd->offset = reg; + cd->len = len; + ret = 1; + } + } else { + if ((reg + (len-1)) < + TAS2781_YRAM5_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM5_START_REG; + cd->len = + len - (TAS2781_YRAM5_START_REG - reg); + ret = 1; + } + } + } + } else + ret = 0; + + return ret; +} + +// Return Code: +// 1 -- the registers are in the inblock yram +// 0 -- the registers are NOT in the inblock yram +static int check_inblock_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + int ret; + + if (book == TAS2781_YRAM_BOOK1) { + if (page < TAS2781_YRAM2_START_PAGE) + ret = 0; + else if (page <= TAS2781_YRAM2_END_PAGE) { + if (reg > TAS2781_YRAM2_END_REG) + ret = 0; + else if (reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + ret = 1; + } else { + if ((reg + (len-1)) < + TAS2781_YRAM2_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM2_START_REG; + cd->len = + reg + len - TAS2781_YRAM2_START_REG; + ret = 1; + } + } + } else + ret = 0; + } else if (book == + TAS2781_YRAM_BOOK2) { + if (page < TAS2781_YRAM4_START_PAGE) + ret = 0; + else if (page <= TAS2781_YRAM4_END_PAGE) { + if (reg > TAS2781_YRAM2_END_REG) + ret = 0; + else if (reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + ret = 1; + } else { + if ((reg + (len-1)) + < TAS2781_YRAM2_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM2_START_REG; + cd->len = + reg + len - TAS2781_YRAM2_START_REG; + ret = 1; + } + } + } else + ret = 0; + } else + ret = 0; + + return ret; +} + +static int check_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + int ret; + + ret = check_inpage_yram(cd, book, page, reg, len); + if (ret == 0) + ret = check_inblock_yram(cd, book, + page, reg, len); + + return ret; +} + +static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, + enum channel chl, unsigned char book, unsigned char page, + unsigned char reg, unsigned char val) +{ + int ret; + struct tas_crc crc_data; + unsigned int nData1; + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg >= TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (reg <= (TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG) + 4))) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + ret = check_yram(&crc_data, book, page, reg, 1); + if (ret == 1) { + ret = tasdevice_dev_read(tasdevice, chl, + TASDEVICE_REG(book, page, reg), &nData1); + if (ret < 0) + goto end; + + if (nData1 != val) { + dev_err(tasdevice->dev, + "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", + book, page, reg, + val, nData1); + ret = -EAGAIN; + tasdevice->tasdevice[chl].err_code |= + ERROR_YRAM_CRCCHK; + ret = -EAGAIN; + goto end; + } + + ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); + } + +end: + return ret; +} + +static int do_multireg_checksum(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned char book, unsigned char page, + unsigned char reg, unsigned int len) +{ + int ret, i; + unsigned char crc_chksum = 0; + unsigned char nBuf1[128]; + struct tas_crc crc_data; + + if ((reg + len-1) > 127) { + ret = -EINVAL; + dev_err(tasdevice->dev, "firmware error\n"); + goto end; + } + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg == TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (len == 4)) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + ret = check_yram(&crc_data, book, page, reg, len); + if (ret == 1) { + if (len == 1) { + dev_err(tasdevice->dev, "firmware error\n"); + ret = -EINVAL; + goto end; + } else { + ret = tasdevice_dev_bulk_read(tasdevice, chn, + TASDEVICE_REG(book, page, crc_data.offset), + nBuf1, crc_data.len); + if (ret < 0) + goto end; + + for (i = 0; i < crc_data.len; i++) { + if ((book == TASDEVICE_BOOK_ID( + TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID( + TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + >= TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + <= (TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG) + + 4))) { + /*DSP swap command, bypass */ + continue; + } else + crc_chksum += + crc8(tasdevice->crc8_lkp_tbl, + &nBuf1[i], 1, 0); + } + + ret = crc_chksum; + } + } + +end: + return ret; +} + +static int tasdevice_load_block(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block) +{ + int ret = 0; + unsigned int nr_cmds; + unsigned char book; + unsigned char page; + unsigned char offset; + unsigned char val; + unsigned int len; + unsigned int sleep_dur; + unsigned char crc_chksum = 0; + unsigned int nr_value; + int nr_retry = 6; + unsigned char *data = block->data; + int chn = 0, chnend = 0; + + switch (block->type) { + case MAIN_ALL_DEVICES: + chn = 0; + chnend = tas_dev->ndev; + break; + case MAIN_DEVICE_A: + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + chn = 0; + chnend = 1; + break; + case MAIN_DEVICE_B: + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + chn = 1; + chnend = 2; + break; + case MAIN_DEVICE_C: + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + chn = 2; + chnend = 3; + break; + case MAIN_DEVICE_D: + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + chn = 3; + chnend = 4; + break; + default: + dev_dbg(tas_dev->dev, "load blk: Other Type = 0x%02x\n", + block->type); + break; + } + + for (; chn < chnend; chn++) { + if (tas_dev->tasdevice[chn].is_loading == false) + continue; +start: + if (block->is_pchksum_present) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_I2CChecksum, 0); + if (ret < 0) + goto end; + } + + if (block->is_ychksum_present) + crc_chksum = 0; + + nr_cmds = 0; + + while (nr_cmds < block->nr_cmds) { + data = block->data + nr_cmds * 4; + + book = data[0]; + page = data[1]; + offset = data[2]; + val = data[3]; + + nr_cmds++; + + if (offset <= 0x7F) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(book, page, offset), + val); + if (ret < 0) + goto end; + if (block->is_ychksum_present) { + ret = do_singlereg_checksum(tas_dev, + chn, book, page, offset, + val); + if (ret < 0) + goto check; + crc_chksum += (unsigned char)ret; + } + continue; + } + if (offset == 0x81) { + sleep_dur = (book << 8) + page; + msleep(sleep_dur); + continue; + } + if (offset == 0x85) { + data += 4; + len = (book << 8) + page; + book = data[0]; + page = data[1]; + offset = data[2]; + if (len > 1) { + ret = tasdevice_dev_bulk_write( + tas_dev, chn, + TASDEVICE_REG(book, page, + offset), data + 3, len); + if (ret < 0) + goto end; + if (!block->is_ychksum_present) + goto next; + ret = do_multireg_checksum( + tas_dev, chn, book, + page, offset, + len); + if (ret < 0) + goto check; + crc_chksum += + (unsigned char)ret; + } else { + ret = tasdevice_dev_write(tas_dev, + chn, + TASDEVICE_REG(book, page, + offset), + data[3]); + if (ret < 0) + goto end; + if (!block->is_ychksum_present) + goto next; + ret = do_singlereg_checksum( + tas_dev, chn, book, + page, offset, + data[3]); + if (ret < 0) + goto check; + crc_chksum += + (unsigned char)ret; + } +next: + nr_cmds++; + if (len >= 2) + nr_cmds += ((len - 2) / 4) + 1; + } + } + if (block->is_pchksum_present) { + ret = tasdevice_dev_read(tas_dev, chn, + TASDEVICE_I2CChecksum, &nr_value); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: Chn %d\n", __func__, + chn); + goto check; + } + if ((nr_value & 0xff) != block->pchksum) { + dev_err(tas_dev->dev, "Blk PChkSum Chn %d ", + chn); + dev_err(tas_dev->dev, + "FW = 0x%x, Reg = 0x%x\n", + block->pchksum, + (nr_value & 0xff)); + ret = -EAGAIN; + tas_dev->tasdevice[chn].err_code |= + ERROR_PRAM_CRCCHK; + goto check; + } + ret = 0; + tas_dev->tasdevice[chn].err_code &= + ~ERROR_PRAM_CRCCHK; + } + + if (block->is_ychksum_present) { + //TBD, open it when FW ready + dev_err(tas_dev->dev, + "Block YChkSum: FW = 0x%x, YCRC = 0x%x\n", + block->ychksum, crc_chksum); + + tas_dev->tasdevice[chn].err_code &= + ~ERROR_YRAM_CRCCHK; + ret = 0; + } +check: + if (ret == -EAGAIN) { + nr_retry--; + if (nr_retry > 0) + goto start; + else { + if ((block->type == MAIN_ALL_DEVICES) + || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + nr_retry = 6; + } + } + } +end: + if (ret < 0) + dev_err(tas_dev->dev, "Block (%d) load error\n", block->type); + + return ret; +} + + +static int tasdevice_load_data(struct tasdevice_priv *tas_dev, + struct tasdevice_data *dev_data) +{ + int ret = 0; + unsigned int nr_block; + struct tasdev_blk *block; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tas_dev->tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +static int tasdevice_load_calibrated_data( + struct tasdevice_priv *tas_dev, struct tasdevice_data *dev_data) +{ + int ret = 0; + unsigned int nr_block; + struct tasdev_blk *block; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +int tas2781_load_calibration(void *context, + char *file_name, enum channel i) +{ + int ret, offset = 0; + struct firmware fmw; + const struct firmware *fw_entry; + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + struct tasdevice *tasdev = &(tas_dev->tasdevice[i]); + struct tasdevice_fw *tas_fmw; + + ret = request_firmware(&fw_entry, file_name, tas_dev->dev); + if (!ret) { + if (!fw_entry->size) { + dev_err(tas_dev->dev, + "%s: file read error: size = %lu\n", + __func__, (unsigned long)fw_entry->size); + goto out; + } + fmw.size = fw_entry->size; + fmw.data = fw_entry->data; + } else { + dev_info(tas_dev->dev, + "%s: Request firmware %s failed\n", + __func__, file_name); + goto out; + } + + tas_fmw = tasdev->cali_data_fmw = kcalloc(1, + sizeof(struct tasdevice_fw), GFP_KERNEL); + if (tasdev->cali_data_fmw == NULL) { + dev_err(tas_dev->dev, "%s: FW memory failed!\n", __func__); + ret = -1; + goto out; + } + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, "%s: fw_parse_header EXIT!\n", __func__); + goto out; + } + offset = fw_parse_variable_hdr_cal(tas_dev, tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, + "%s: fw_parse_variable_header_cal EXIT!\n", __func__); + goto out; + } + offset = fw_parse_program_data(tas_dev, tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, "fw_parse_program_data EXIT!\n"); + goto out; + } + offset = fw_parse_configuration_data(tas_dev, tas_fmw, &fmw, + offset); + if (offset == -1) { + dev_err(tas_dev->dev, "fw_parse_configuration_data EXIT!\n"); + goto out; + } + offset = fw_parse_calibration_data(tas_dev, + tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, "fw_parse_calibration_data EXIT!\n"); + goto out; + } + tasdev->is_calibrated_data_loaded = true; +out: + if (fw_entry) { + release_firmware(fw_entry); + fw_entry = NULL; + } + return ret; +} + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_fw *tas_fmw; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr; + int offset = 0, ret = 0; + + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, "%s: Failed to read firmware %s\n", + __func__, tas_dev->coef_binaryname); + ret = -1; + goto out; + } + + tas_dev->fmw = kcalloc(1, + sizeof(struct tasdevice_fw), GFP_KERNEL); + if (tas_dev->fmw == NULL) { + ret = -1; + goto out; + } + tas_fmw = tas_dev->fmw; + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, fmw, offset); + + if (offset == -1) + goto out; + fw_fixed_hdr = &(tas_fmw->fw_hdr.fixed_hdr); + switch (fw_fixed_hdr->drv_ver) { + case 0x301: + case 0x302: + case 0x502: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + break; + case 0x202: + case 0x400: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + if (fw_fixed_hdr->drv_ver == 0x100) { + if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + tas_dev->fw_parse_calibration_data = NULL; + } else { + switch (fw_fixed_hdr->ppcver) { + case 0x00: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->fw_parse_calibration_data = + fw_parse_calibration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + dev_err(tas_dev->dev, + "%s: PPCVersion must be 0x0 or 0x%02x", + __func__, PPC3_VERSION); + dev_err(tas_dev->dev, " Current:0x%02x\n", + fw_fixed_hdr->ppcver); + offset = -1; + break; + } + } + } else { + dev_err(tas_dev->dev, + "DriverVersion must be 0x0, 0x230 or above 0x230 "); + dev_err(tas_dev->dev, "current is 0x%02x\n", + fw_fixed_hdr->drv_ver); + offset = -1; + } + break; + } + + offset = tas_dev->fw_parse_variable_header(tas_dev, fmw, offset); + if (offset == -1) + goto out; + + offset = tas_dev->fw_parse_program_data(tas_dev, tas_fmw, fmw, + offset); + if (offset < 0) { + ret = -1; + goto out; + } + offset = tas_dev->fw_parse_configuration_data(tas_dev, + tas_fmw, fmw, offset); + if (offset < 0) + ret = -1; + +out: + return ret; +} + +void tasdevice_calbin_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice *tasdev; + int i; + + if (tas_dev) { + for (i = 0; i < tas_dev->ndev; i++) { + tasdev = &(tas_dev->tasdevice[i]); + if (tasdev->cali_data_fmw) { + tas2781_clear_calfirmware( + tasdev->cali_data_fmw); + tasdev->cali_data_fmw = NULL; + } + } + } +} + +static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog) +{ + struct tasdevice_data *im; + unsigned int nr_blk; + struct tasdev_blk *blk; + + if (prog) { + im = &(prog->dev_data); + + if (!im->dev_blks) + return; + + for (nr_blk = 0; nr_blk < im->nr_blk; nr_blk++) { + blk = &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); + } +} + +static void tasdev_dsp_prog_remove(struct tasdevice_prog *prog, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_prog_blk_remove(&prog[i]); + kfree(prog); +} + +static void tasdev_dsp_cfg_blk_remove(struct tasdevice_config *cfg) +{ + struct tasdevice_data *im; + unsigned int nr_blk; + struct tasdev_blk *blk; + + if (cfg) { + im = &(cfg->dev_data); + + if (!im->dev_blks) + return; + + for (nr_blk = 0; nr_blk < im->nr_blk; nr_blk++) { + blk = &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); + } +} + +static void tasdev_dsp_cfg_remove(struct tasdevice_config *config, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_cfg_blk_remove(&config[i]); + kfree(config); +} + +void tasdevice_dsp_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + + if (tas_dev->fmw) { + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + + if (tas_fmw->programs) + tasdev_dsp_prog_remove(tas_fmw->programs, + tas_fmw->nr_programs); + if (tas_fmw->configs) + tasdev_dsp_cfg_remove(tas_fmw->configs, + tas_fmw->nr_configurations); + kfree(tas_fmw); + tas_dev->fmw = NULL; + } +} + +static int tas2781_set_calibration(void *context, enum channel i, + int n_calibration) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + int ret = 0; + struct tasdevice *tasdevice = &(tas_dev->tasdevice[i]); + struct tasdevice_fw *cal_fmw = tasdevice->cali_data_fmw; + + if ((!tas_dev->fmw->programs) || (!tas_dev->fmw->configs)) { + dev_err(tas_dev->dev, "%s, Firmware not loaded\n\r", __func__); + ret = 0; + goto out; + } + + if (n_calibration == 0xFF || (n_calibration == 0x100 + && tasdevice->is_calibrated_data_loaded == false)) { + if (cal_fmw) { + tasdevice->is_calibrated_data_loaded = false; + tas2781_clear_calfirmware(cal_fmw); + cal_fmw = NULL; + } + + scnprintf(tas_dev->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", + tas_dev->dev_name, tas_dev->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_dev, + tas_dev->cal_binaryname[i], i); + if (ret != 0) { + dev_err(tas_dev->dev, + "%s: load %s error, no-side effect\n", + __func__, tas_dev->cal_binaryname[i]); + ret = 0; + } + } + tasdevice->is_loading = true; + tasdevice->is_loaderr = false; + + if (cal_fmw) { + struct tasdevice_calibration *calibration = + cal_fmw->calibrations; + + if (calibration) + tasdevice_load_calibrated_data(tas_dev, + &(calibration->dev_data)); + } else + dev_err(tas_dev->dev, "%s: No calibrated data for dev %d\n", + __func__, i); + +out: + return ret; +} + +int tasdevice_select_tuningprm_cfg(void *context, int prm_no, + int cfg_no, int rca_conf_no) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_config *conf; + struct tasdevice_prog *program; + int i; + int status; + int prog_status; + + if (!tas_fmw) { + dev_err(tas_dev->dev, "%s: Firmware is NULL\n", __func__); + goto out; + } + + if (cfg_no >= tas_fmw->nr_configurations) { + dev_err(tas_dev->dev, + "%s: cfg(%d) is not in range of conf %u\n", + __func__, cfg_no, tas_fmw->nr_configurations); + goto out; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_dev->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + goto out; + } + + if (rca_conf_no > rca->ncfgs || rca_conf_no <= 0 || + cfg_info == NULL) { + dev_err(tas_dev->dev, + "conf_no:%d should be in range from 0 to %u\n", + rca_conf_no, rca->ncfgs-1); + goto out; + } + + conf = &(tas_fmw->configs[cfg_no]); + for (i = 0, prog_status = 0; i < tas_dev->ndev; i++) { + if (cfg_info[rca_conf_no]->active_dev & (1 << i)) { + if (tas_dev->tasdevice[i].cur_prog != prm_no) { + tas_dev->tasdevice[i].cur_conf = -1; + tas_dev->tasdevice[i].is_loading = true; + prog_status++; + } + } else + tas_dev->tasdevice[i].is_loading = false; + tas_dev->tasdevice[i].is_loaderr = false; + } + + if (prog_status) { + program = &(tas_fmw->programs[prm_no]); + tasdevice_load_data(tas_dev, &(program->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) + continue; + else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) { + struct tasdevice_fw *cal_fmw = + tas_dev->tasdevice[i].cali_data_fmw; + + if (cal_fmw) { + struct tasdevice_calibration + *calibration = + cal_fmw->calibrations; + + if (calibration) + tasdevice_load_calibrated_data( + tas_dev, + &(calibration->dev_data)); + } + tas_dev->tasdevice[i].cur_prog = prm_no; + } + } + } + + if (tas_dev->is_glb_calibrated_data_loaded == false) { + for (i = 0; i < tas_dev->ndev; i++) + tas2781_set_calibration(tas_dev, i, 0x100); + tas_dev->is_glb_calibrated_data_loaded = true; + /* Unwise to reload calibrationdata everytime, + * this code will work once even if calibrated + * data still failed to be got + */ + } + + for (i = 0, status = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].cur_conf != cfg_no + && (cfg_info[rca_conf_no]->active_dev & (1 << i)) + && (tas_dev->tasdevice[i].is_loaderr == false)) { + status++; + tas_dev->tasdevice[i].is_loading = true; + } else + tas_dev->tasdevice[i].is_loading = false; + } + + if (status) { + status = 0; + tasdevice_load_data(tas_dev, &(conf->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) { + status |= 1 << (i + 4); + continue; + } else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) + tas_dev->tasdevice[i].cur_conf = cfg_no; + } + } else + dev_err(tas_dev->dev, + "%s: No device is in active in conf %d\n", + __func__, rca_conf_no); + + status |= cfg_info[rca_conf_no]->active_dev; +out: + return prog_status; +} diff --git a/sound/soc/codecs/tas2781-dsp.h b/sound/soc/codecs/tas2781-dsp.h new file mode 100644 index 000000000000..26a6f5796349 --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.h @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TASDEVICE_DSP_H__ +#define __TASDEVICE_DSP_H__ + +#define MAIN_ALL_DEVICES 0x0d +#define MAIN_DEVICE_A 0x01 +#define MAIN_DEVICE_B 0x08 +#define MAIN_DEVICE_C 0x10 +#define MAIN_DEVICE_D 0x14 +#define COEFF_DEVICE_A 0x03 +#define COEFF_DEVICE_B 0x0a +#define COEFF_DEVICE_C 0x11 +#define COEFF_DEVICE_D 0x15 +#define PRE_DEVICE_A 0x04 +#define PRE_DEVICE_B 0x0b +#define PRE_DEVICE_C 0x12 +#define PRE_DEVICE_D 0x16 + +#define PPC3_VERSION 0x4100 +#define RCA_CONFIGID_BYPASS_ALL 0 +#define TASDEVICE_DEVICE_SUM 8 +#define TASDEVICE_CONFIG_SUM 64 + +enum channel { + top_left_Chn, + top_right_chn, + bottom_left_Chn, + bottom_right_chn, + max_chn, +}; + +enum tasdevice_dsp_dev_idx { + TASDEVICE_DSP_TAS_2555 = 0, + TASDEVICE_DSP_TAS_2555_STEREO, + TASDEVICE_DSP_TAS_2557_MONO, + TASDEVICE_DSP_TAS_2557_DUAL_MONO, + TASDEVICE_DSP_TAS_2559, + TASDEVICE_DSP_TAS_2563, + TASDEVICE_DSP_TAS_2563_DUAL_MONO = 7, + TASDEVICE_DSP_TAS_2563_QUAD, + TASDEVICE_DSP_TAS_2563_21, + TASDEVICE_DSP_TAS_2781, + TASDEVICE_DSP_TAS_2781_DUAL_MONO, + TASDEVICE_DSP_TAS_2781_21, + TASDEVICE_DSP_TAS_2781_QUAD, + TASDEVICE_DSP_TAS_MAX_DEVICE +}; + +struct tasdevice_fw_fixed_hdr { + unsigned int fwsize; + unsigned int ppcver; + unsigned int drv_ver; +}; + +struct tasdevice_dspfw_hdr { + struct tasdevice_fw_fixed_hdr fixed_hdr; + unsigned short device_family; + unsigned short device; + unsigned char ndev; +}; + +struct tasdev_blk { + unsigned int type; + unsigned char is_pchksum_present; + unsigned char pchksum; + unsigned char is_ychksum_present; + unsigned char ychksum; + unsigned int nr_cmds; + unsigned int blk_size; + unsigned int nr_subblocks; + unsigned char *data; +}; + +struct tasdevice_data { + char name[64]; + unsigned int nr_blk; + struct tasdev_blk *dev_blks; +}; +struct tasdevice_prog { + unsigned int prog_size; + struct tasdevice_data dev_data; +}; + +struct tasdevice_config { + unsigned int cfg_size; + char name[64]; + struct tasdevice_data dev_data; +}; + +struct tasdevice_calibration { + struct tasdevice_data dev_data; +}; + +struct tasdevice_fw { + struct tasdevice_dspfw_hdr fw_hdr; + unsigned short nr_programs; + struct tasdevice_prog *programs; + unsigned short nr_configurations; + struct tasdevice_config *configs; + unsigned short nr_calibrations; + struct tasdevice_calibration *calibrations; + struct device *dev; +}; + +enum tasdevice_dsp_fw_state { + TASDEVICE_DSP_FW_NONE = 0, + TASDEVICE_DSP_FW_PENDING, + TASDEVICE_DSP_FW_FAIL, + TASDEVICE_DSP_FW_ALL_OK, +}; + +enum tasdevice_bin_blk_type { + TASDEVICE_BIN_BLK_COEFF = 1, + TASDEVICE_BIN_BLK_POST_POWER_UP, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN, + TASDEVICE_BIN_BLK_PRE_POWER_UP, + TASDEVICE_BIN_BLK_POST_SHUTDOWN +}; + +struct tasdevice_rca_hdr { + unsigned int img_sz; + unsigned int checksum; + unsigned int binary_version_num; + unsigned int drv_fw_version; + unsigned char plat_type; + unsigned char dev_family; + unsigned char reserve; + unsigned char ndev; + unsigned char devs[TASDEVICE_DEVICE_SUM]; + unsigned int nconfig; + unsigned int config_size[TASDEVICE_CONFIG_SUM]; +}; + +struct tasdev_blk_data { + unsigned char dev_idx; + unsigned char block_type; + unsigned short yram_checksum; + unsigned int block_size; + unsigned int n_subblks; + unsigned char *regdata; +}; + +struct tasdevice_config_info { + unsigned int nblocks; + unsigned int real_nblocks; + unsigned char active_dev; + struct tasdev_blk_data **blk_data; +}; + +struct tasdevice_rca { + struct tasdevice_rca_hdr fw_hdr; + int ncfgs; + struct tasdevice_config_info **cfg_info; + int profile_cfg_id; +}; + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context); +void tasdevice_dsp_remove(void *context); +void tasdevice_calbin_remove(void *context); +int tas2781_load_calibration(void *tas_dev, char *filename, + enum channel i); +int tasdevice_select_tuningprm_cfg(void *context, int prm, + int cfg_no, int rca_conf_no); + +#endif diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c new file mode 100644 index 000000000000..5c4af6b8069c --- /dev/null +++ b/sound/soc/codecs/tas2781-i2c.c @@ -0,0 +1,1665 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "tas2781.h" + +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d + +const char *blocktype[5] = { + "COEFF", + "POST_POWER_UP", + "PRE_SHUTDOWN", + "PRE_POWER_UP", + "POST_SHUTDOWN" +}; + +static const struct i2c_device_id tasdevice_id[] = { + { "tas2781", TAS2781 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tasdevice_id); + +static const struct regmap_range_cfg tasdevice_ranges[] = { + { + .range_min = 0, + .range_max = 256 * 128, + .selector_reg = TASDEVICE_PAGE_SELECT, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 128, + }, +}; + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 16, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .ranges = tasdevice_ranges, + .num_ranges = ARRAY_SIZE(tasdevice_ranges), + .max_register = 256 * 128, +}; + +static const struct of_device_id tasdevice_of_match[] = { + { .compatible = "ti,tas2781" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, tasdevice_of_match); + +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + unsigned char subblk_typ = data[1]; + int subblk_offset; + int chn, chnend; + int rc; + int blktyp = dev_idx & 0xC0; + int idx = dev_idx & 0x3F; + bool is_err = false; + + if (idx) { + chn = idx-1; + chnend = idx; + } else { + if (tas_dev->set_global_mode) { + chn = tas_dev->ndev; + chnend = tas_dev->ndev + 1; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + } + + for (; chn < chnend; chn++) { + if (!tas_dev->set_global_mode && + tas_dev->tasdevice[chn].is_loading == false) + continue; + + is_err = false; + subblk_offset = 2; + switch (subblk_typ) { + case TASDEVICE_CMD_SING_W: { + int i = 0; + unsigned short len = SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 * len > sublocksize) { + dev_err(tas_dev->dev, + "process_block: Out of bounary\n"); + is_err = true; + break; + } + + for (i = 0; i < len; i++) { + rc = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + data[subblk_offset + 3]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "process_block: single write error\n"); + } + subblk_offset += 4; + } + } + break; + case TASDEVICE_CMD_BURST: { + unsigned short len = + SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 + len > sublocksize) { + dev_err(tas_dev->dev, + "%s: BST Out of bounary\n", + __func__); + is_err = true; + break; + } + if (len % 4) { + dev_err(tas_dev->dev, + "%s:Bst-len(%u)not div by 4\n", + __func__, len); + break; + } + + rc = tasdevice_dev_bulk_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + &(data[subblk_offset + 4]), + len); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: bulk_write error = %d\n", + __func__, rc); + } + subblk_offset += (len + 4); + } + break; + case TASDEVICE_CMD_DELAY: { + unsigned short delay_time = 0; + + if (subblk_offset + 2 > sublocksize) { + dev_err(tas_dev->dev, + "%s: deley Out of bounary\n", + __func__); + is_err = true; + break; + } + delay_time = SMS_HTONS(data[2], data[3]); + usleep_range(delay_time*1000, delay_time*1000); + subblk_offset += 2; + } + break; + case TASDEVICE_CMD_FIELD_W: + if (subblk_offset + 6 > sublocksize) { + dev_err(tas_dev->dev, + "%s: bit write Out of bounary\n", + __func__); + is_err = true; + break; + } + rc = tasdevice_dev_update_bits(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset + 2], + data[subblk_offset + 3], + data[subblk_offset + 4]), + data[subblk_offset + 1], + data[subblk_offset + 5]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: update_bits error = %d\n", + __func__, rc); + } + subblk_offset += 6; + break; + default: + break; + }; + if (is_err == true && blktyp != 0) { + if (blktyp == 0x80) { + tas_dev->tasdevice[chn].cur_prog = -1; + tas_dev->tasdevice[chn].cur_conf = -1; + } else + tas_dev->tasdevice[chn].cur_conf = -1; + } + } + return subblk_offset; +} + +static void tasdevice_select_cfg_blk(void *pContext, int conf_no, + unsigned char block_type) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) pContext; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + int j, k, chn, chnend; + + if (conf_no >= rca->ncfgs || conf_no < 0 || NULL == cfg_info) { + dev_err(tas_dev->dev, + "conf_no should be not more than %u\n", + rca->ncfgs); + goto out; + } + + for (j = 0; j < (int)cfg_info[conf_no]->real_nblocks; j++) { + unsigned int length = 0, rc = 0; + + if (block_type > 5 || block_type < 2) { + dev_err(tas_dev->dev, + "ERROR!!!block_type should be in range from 2 to 5\n"); + goto out; + } + if (block_type != cfg_info[conf_no]->blk_data[j]->block_type) + continue; + + for (k = 0; k < (int)cfg_info[conf_no]->blk_data[j]->n_subblks; + k++) { + if (cfg_info[conf_no]->blk_data[j]->dev_idx) { + chn = + cfg_info[conf_no]->blk_data[j]->dev_idx + - 1; + chnend = + cfg_info[conf_no]->blk_data[j]->dev_idx; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + for (; chn < chnend; chn++) + tas_dev->tasdevice[chn].is_loading = true; + + rc = tasdevice_process_block(tas_dev, + cfg_info[conf_no]->blk_data[j]->regdata + + length, + cfg_info[conf_no]->blk_data[j]->dev_idx, + cfg_info[conf_no]->blk_data[j]->block_size - + length); + length += rc; + if (cfg_info[conf_no]->blk_data[j]->block_size < + length) { + dev_err(tas_dev->dev, + "%s: ERROR:%u %u out of bounary\n", + __func__, length, + cfg_info[conf_no]->blk_data[j] + ->block_size); + break; + } + } + if (length != cfg_info[conf_no]->blk_data[j]->block_size) + dev_err(tas_dev->dev, + "%s: %u %u size is not same\n", + __func__, length, + cfg_info[conf_no]->blk_data[j]->block_size); + + } + +out: + return; +} + +static struct tasdevice_config_info *tasdevice_add_config( + void *context, unsigned char *config_data, + unsigned int config_size) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *)context; + struct tasdevice_config_info *cfg_info = NULL; + int config_offset = 0, i; + + cfg_info = kzalloc( + sizeof(struct tasdevice_config_info), GFP_KERNEL); + if (!cfg_info) + goto out; + + if (tas_dev->rcabin.fw_hdr.binary_version_num >= 0x105) { + if (config_offset + 64 > (int)config_size) { + dev_err(tas_dev->dev, "add config: Out of bounary\n"); + goto out; + } + config_offset += 64; + } + + if (config_offset + 4 > (int)config_size) { + dev_err(tas_dev->dev, "add config: Out of bounary\n"); + goto out; + } + cfg_info->nblocks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data = kcalloc( + cfg_info->nblocks, sizeof(struct tasdev_blk_data *), + GFP_KERNEL); + if (!cfg_info->blk_data) + goto out; + + cfg_info->real_nblocks = 0; + for (i = 0; i < (int)cfg_info->nblocks; i++) { + if (config_offset + 12 > config_size) { + dev_err(tas_dev->dev, + "add config: Out of bounary: i = %d nblocks = %u!\n", + i, cfg_info->nblocks); + break; + } + cfg_info->blk_data[i] = kzalloc( + sizeof(struct tasdev_blk_data), GFP_KERNEL); + if (!cfg_info->blk_data[i]) + break; + + cfg_info->blk_data[i]->dev_idx = config_data[config_offset]; + config_offset++; + + cfg_info->blk_data[i]->block_type = config_data[config_offset]; + config_offset++; + + if (cfg_info->blk_data[i]->block_type == + TASDEVICE_BIN_BLK_PRE_POWER_UP) { + if (cfg_info->blk_data[i]->dev_idx == 0) + cfg_info->active_dev = 1; + else + cfg_info->active_dev = + 1 << + (cfg_info->blk_data[i]->dev_idx - 1); + + } + cfg_info->blk_data[i]->yram_checksum = + SMS_HTONS(config_data[config_offset], + config_data[config_offset + 1]); + config_offset += 2; + cfg_info->blk_data[i]->block_size = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data[i]->n_subblks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + + config_offset += 4; + cfg_info->blk_data[i]->regdata = kzalloc( + cfg_info->blk_data[i]->block_size, GFP_KERNEL); + if (cfg_info->blk_data[i]->regdata == NULL) + goto out; + + if (config_offset + cfg_info->blk_data[i]->block_size + > config_size) { + dev_err(tas_dev->dev, + "%s: block_size Out of bounary: i = %d blks = %u!\n", + __func__, i, cfg_info->nblocks); + break; + } + memcpy(cfg_info->blk_data[i]->regdata, + &config_data[config_offset], + cfg_info->blk_data[i]->block_size); + config_offset += cfg_info->blk_data[i]->block_size; + cfg_info->real_nblocks += 1; + } +out: + return cfg_info; +} + +/* tas2781 contain book and page two-level regmap, especially book switching + * will set the register BXXP00R7F, after switching to the correct book, + * then leverage the mechanism for paging to access the register. Custom + * control is primarily for regmap booking, paging depends on internal + * regmap mechanism + */ +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned int invert = mc->invert; + int max = mc->max; + int ret = 0; + + /* Read the primary device as the whole */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, "%s, get digital vol error\n", __func__); + goto out; + } + + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val, i; + unsigned int invert = mc->invert; + int max = mc->max; + int err_cnt = 0; + int ret = 1; + + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + + if (!tas_dev->set_global_mode) { + ret = tasdevice_dev_write(tas_dev, tas_dev->ndev, + mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_dev->dev, "%s, error in global mode\n", + __func__); + } + + if (tas_dev->set_global_mode == NULL || ret == 1) { + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, mc->reg, + (unsigned int)val); + if (ret) { + err_cnt++; + dev_err(tas_dev->dev, + "set digital vol err in dev %d\n", i); + } + } + } + /* All the devices set error, return 0*/ + return (err_cnt == tas_dev->ndev) ? 0 : 1; +} + +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned char mask = 0; + int max = mc->max; + int ret = 0; + unsigned int invert = mc->invert; + + /* Read the primary device */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + int i, ret; + unsigned char mask; + int max = mc->max; + unsigned int invert = mc->invert; + int err_cnt = 0; + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + mc->reg, mask, (unsigned int)(val << mc->shift)); + if (ret) { + err_cnt++; + dev_err(tas_dev->dev, "set AMP vol error in dev %d\n", + i); + } + } + + /* All the devices set error, return 0*/ + return (err_cnt == tas_dev->ndev) ? 0 : 1; +} + +static const DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); +static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); + +static const struct snd_kcontrol_new tas2781_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), +}; + +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + + tas_dev->rcabin.profile_cfg_id = + ucontrol->value.integer.value[0]; + + return 1; +} + +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_programs; + + return 0; +} + +static int tasdevice_info_configurations( + struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_configurations - 1; + + + return 0; +} + +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + + uinfo->count = 1; + uinfo->value.integer.min = 1; + uinfo->value.integer.max = max(0, tas_dev->rcabin.ncfgs); + + return 0; +} + +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev + = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = + tas_dev->rcabin.profile_cfg_id; + + return 0; +} + +static int tasdevice_create_controls(struct tasdevice_priv *tas_dev) +{ + int nr_controls = 1, ret = 0, mix_index = 0; + char *name = NULL; + struct snd_kcontrol_new *tasdevice_profile_controls = NULL; + + tasdevice_profile_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_profile_controls[0]), + GFP_KERNEL); + if (tasdevice_profile_controls == NULL) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!name) { + ret = -ENOMEM; + goto out; + } + scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "TASDEVICE Profile id"); + tasdevice_profile_controls[mix_index].name = name; + tasdevice_profile_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_profile_controls[mix_index].info = + tasdevice_info_profile; + tasdevice_profile_controls[mix_index].get = + tasdevice_get_profile_id; + tasdevice_profile_controls[mix_index].put = + tasdevice_set_profile_id; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_profile_controls, + nr_controls < mix_index ? nr_controls : mix_index); + + tas_dev->tas_ctrl.nr_controls = + nr_controls < mix_index ? nr_controls : mix_index; +out: + return ret; +} + +static int tasdevice_program_get(struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *pTAS2781 = snd_soc_component_get_drvdata(codec); + + pValue->value.integer.value[0] = pTAS2781->cur_prog; + + return 0; +} + +static int tasdevice_program_put(struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *pTAS2781 = snd_soc_component_get_drvdata(codec); + unsigned int nProgram = pValue->value.integer.value[0]; + + pTAS2781->cur_prog = nProgram; + + return 1; +} + +static int tasdevice_configuration_get( + struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *pTAS2781 = snd_soc_component_get_drvdata(codec); + + pValue->value.integer.value[0] = pTAS2781->cur_conf; + + return 0; +} + +static int tasdevice_configuration_put( + struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int n_configuration = pValue->value.integer.value[0]; + + tas_dev->cur_conf = n_configuration; + + return 1; +} + +static int tasdevice_dsp_create_control( + struct tasdevice_priv *tas_dev) +{ + int nr_controls = 2, ret = 0, mix_index = 0; + char *program_name = NULL; + char *configuration_name = NULL; + struct snd_kcontrol_new *tasdevice_dsp_controls = NULL; + + tasdevice_dsp_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_dsp_controls[0]), + GFP_KERNEL); + if (tasdevice_dsp_controls == NULL) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + program_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + configuration_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!program_name || !configuration_name) { + ret = -ENOMEM; + goto out; + } + + scnprintf(program_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "Program"); + tasdevice_dsp_controls[mix_index].name = program_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_programs; + tasdevice_dsp_controls[mix_index].get = + tasdevice_program_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_program_put; + mix_index++; + + scnprintf(configuration_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "Configuration"); + tasdevice_dsp_controls[mix_index].name = configuration_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_configurations; + tasdevice_dsp_controls[mix_index].get = + tasdevice_configuration_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_configuration_put; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_dsp_controls, + nr_controls < mix_index ? nr_controls : mix_index); + + tas_dev->tas_ctrl.nr_controls += nr_controls; +out: + return ret; +} + +static void tasdevice_rca_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tasdevice_rca *rca; + struct tasdevice_rca_hdr *fw_hdr; + struct tasdevice_config_info **cfg_info = NULL; + const struct firmware *fw_entry; + unsigned char *buf; + int offset = 0; + int i, ret; + unsigned int total_config_sz = 0; + + mutex_lock(&tas_dev->codec_lock); + rca = &(tas_dev->rcabin); + fw_hdr = &(rca->fw_hdr); + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, + "Failed to read %s, no side - effect on driver running\n", + tas_dev->rca_binaryname); + ret = -1; + goto out; + } + buf = (unsigned char *)fmw->data; + + fw_hdr->img_sz = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + if (fw_hdr->img_sz != fmw->size) { + dev_err(tas_dev->dev, + "File size not match, %d %u", (int)fmw->size, + fw_hdr->img_sz); + ret = -1; + goto out; + } + + fw_hdr->checksum = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + fw_hdr->binary_version_num = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + if (fw_hdr->binary_version_num < 0x103) { + dev_err(tas_dev->dev, + "File version 0x%04x is too low", + fw_hdr->binary_version_num); + ret = -1; + goto out; + } + offset += 4; + fw_hdr->drv_fw_version = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 8; + fw_hdr->plat_type = buf[offset]; + offset += 1; + fw_hdr->dev_family = buf[offset]; + offset += 1; + fw_hdr->reserve = buf[offset]; + offset += 1; + fw_hdr->ndev = buf[offset]; + offset += 1; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "ndev(%u) fro rcabin and ndev(%u) fro DTS NOT match\n", + fw_hdr->ndev, tas_dev->ndev); + ret = -1; + goto out; + } + if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { + dev_err(tas_dev->dev, "rca_ready: Out of bounary!\n"); + ret = -1; + goto out; + } + + for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) + fw_hdr->devs[i] = buf[offset]; + + fw_hdr->nconfig = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { + fw_hdr->config_size[i] = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + total_config_sz += fw_hdr->config_size[i]; + } + + if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { + dev_err(tas_dev->dev, "Bin file error!\n"); + ret = -1; + goto out; + } + cfg_info = kcalloc(fw_hdr->nconfig, + sizeof(struct tasdevice_config_info *), + GFP_KERNEL); + + if (!cfg_info) { + ret = -1; + goto out; + } + rca->cfg_info = cfg_info; + rca->ncfgs = 0; + for (i = 0; i < (int)fw_hdr->nconfig; i++) { + cfg_info[i] = tasdevice_add_config(context, &buf[offset], + fw_hdr->config_size[i]); + if (!cfg_info[i]) { + ret = -1; + break; + } + offset += (int)fw_hdr->config_size[i]; + rca->ncfgs += 1; + } + tasdevice_create_controls(tas_dev); + + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; + scnprintf(tas_dev->coef_binaryname, 64, "%s_coef.bin", + tas_dev->dev_name); + ret = request_firmware(&fw_entry, tas_dev->coef_binaryname, + tas_dev->dev); + if (!ret) { + ret = tasdevice_dspfw_ready(fw_entry, tas_dev); + release_firmware(fw_entry); + fw_entry = NULL; + } else { + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + dev_err(tas_dev->dev, "%s: load %s error\n", __func__, + tas_dev->coef_binaryname); + goto out; + } + tasdevice_dsp_create_control(tas_dev); + + tas_dev->fw_state = TASDEVICE_DSP_FW_ALL_OK; + tas_dev->is_glb_calibrated_data_loaded = true; + for (i = 0; i < tas_dev->ndev; i++) { + scnprintf(tas_dev->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", + tas_dev->dev_name, tas_dev->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_dev, + tas_dev->cal_binaryname[i], i); + if (ret != 0) { + dev_err(tas_dev->dev, + "%s: load %s error, no-side effect\n", + __func__, tas_dev->cal_binaryname[i]); + ret = 0; + tas_dev->is_glb_calibrated_data_loaded = false; + } + } + +out: + mutex_unlock(&tas_dev->codec_lock); + if (fmw) + release_firmware(fmw); +} + +static void tasdevice_config_info_remove(void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + int i, j; + + if (cfg_info) { + for (i = 0; i < rca->ncfgs; i++) { + if (cfg_info[i]) { + for (j = 0; j < (int)cfg_info[i]->real_nblocks; + j++) { + kfree( + cfg_info[i]->blk_data[j]->regdata); + kfree(cfg_info[i]->blk_data[j]); + } + kfree(cfg_info[i]->blk_data); + kfree(cfg_info[i]); + } + } + kfree(cfg_info); + } +} + +static void tasdevice_tuning_switch( + struct tasdevice_priv *tas_dev, int state) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + int profile_cfg_id = 0; + + if (state == 0) { + if (tas_fmw) { + if (tas_dev->cur_prog >= tas_fmw->nr_programs) + /*bypass all in rca is profile id 0*/ + profile_cfg_id = RCA_CONFIGID_BYPASS_ALL; + else { + /*dsp mode or tuning mode*/ + profile_cfg_id = + tas_dev->rcabin.profile_cfg_id; + + tasdevice_select_tuningprm_cfg(tas_dev, + tas_dev->cur_prog, + tas_dev->cur_conf, + profile_cfg_id); + if (tas_dev->set_global_mode != NULL) + tas_dev->set_global_mode(tas_dev); + } + } else + profile_cfg_id = RCA_CONFIGID_BYPASS_ALL; + + tasdevice_select_cfg_blk(tas_dev, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + } else + tasdevice_select_cfg_blk(tas_dev, + tas_dev->rcabin.profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN); +} + +static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *codec = snd_soc_dapm_to_component(w->dapm); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int state = 1; + + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + if (event == SND_SOC_DAPM_PRE_PMD) + state = 0; + tasdevice_tuning_switch(tas_dev, state); + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + return 0; +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT_E("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0, tasdevice_dapm_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_SPK("SPK", tasdevice_dapm_event), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC") +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"SPK", NULL, "ASI"}, + {"OUT", NULL, "SPK"}, + {"ASI OUT", NULL, "DMIC"} +}; + +static int tasdevice_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *codec = dai->component; + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int ret = 0; + + if (tas_dev->fw_state != TASDEVICE_DSP_FW_ALL_OK) { + dev_err(tas_dev->dev, "DSP bin file not loaded\n"); + ret = -EINVAL; + } + return ret; +} + +static int tasdevice_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(dai); + unsigned int fsrate; + unsigned int slot_width; + int bclk_rate; + int rc = 0; + + fsrate = params_rate(params); + switch (fsrate) { + case 48000: + break; + case 44100: + break; + default: + dev_err(tas_dev->dev, "%s: incorrect sample rate = %u\n", + __func__, fsrate); + rc = -EINVAL; + goto out; + } + + slot_width = params_width(params); + switch (slot_width) { + case 16: + break; + case 20: + break; + case 24: + break; + case 32: + break; + default: + dev_err(tas_dev->dev, "%s: incorrect slot width = %u\n", + __func__, slot_width); + rc = -EINVAL; + goto out; + } + + bclk_rate = snd_soc_params_to_bclk(params); + if (bclk_rate < 0) { + dev_err(tas_dev->dev, "%s: incorrect bclk rate = %d\n", + __func__, bclk_rate); + rc = bclk_rate; + goto out; + } +out: + return rc; +} + +static int tasdevice_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(codec_dai); + + tas_dev->sysclk = freq; + + return 0; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .startup = tasdevice_startup, + .hw_params = tasdevice_hw_params, + .set_sysclk = tasdevice_set_dai_sysclk, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2781_codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static void tas2781_reset(struct tasdevice_priv *tas_dev) +{ + int ret = 0; + int i = 0; + + if (tas_dev->reset) { + gpiod_set_value_cansleep(tas_dev->reset, 0); + usleep_range(500, 1000); + gpiod_set_value_cansleep(tas_dev->reset, 1); + } else { + + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, + TAS2871_REG_SWRESET, + TAS2871_REG_SWRESET_RESET); + if (ret < 0) + dev_err(tas_dev->dev, + "dev %d swreset fail, %d\n", + i, ret); + } + } + usleep_range(1000, 1050); +} + +static int tasdevice_codec_probe( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + int ret; + + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + + crc8_populate_msb(tas_dev->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); + tas_dev->codec = codec; + scnprintf(tas_dev->rca_binaryname, 64, "%s_rca.bin", + tas_dev->dev_name); + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL, tas_dev, + tasdevice_rca_ready); + if (ret) + dev_err(tas_dev->dev, "request_firmware_nowait err:0x%08x\n", + ret); + + tas2781_reset(tas_dev); + if (tas_dev->set_global_mode != NULL) + tas_dev->set_global_mode(tas_dev); + + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + return ret; +} + +static void tasdevice_deinit(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + + tasdevice_config_info_remove(tas_dev); + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; +} + +static void tasdevice_codec_remove( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + tasdevice_deinit(tas_dev); + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_codec_probe, + .remove = tasdevice_codec_remove, + .controls = tas2781_snd_controls, + .num_controls = ARRAY_SIZE(tas2781_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_parse_dt(struct tasdevice_priv *tas_dev) +{ + struct device_node *np = tas_dev->dev->of_node; + int rc, i, ndev; + unsigned int dev_addrs[max_chn]; + struct i2c_client *client = (struct i2c_client *)tas_dev->client; + + if (tas_dev->isacpi) { + ndev = device_property_read_u32_array(&client->dev, + "ti,audio-slots", NULL, 0); + if (ndev <= 0) { + ndev = 1; + dev_addrs[0] = client->addr; + } else { + ndev = (ndev < ARRAY_SIZE(dev_addrs)) + ? ndev : ARRAY_SIZE(dev_addrs); + ndev = device_property_read_u32_array(&client->dev, + "ti,audio-slots", dev_addrs, ndev); + } + + tas_dev->irq_info.irq_gpio = + acpi_dev_gpio_irq_get(ACPI_COMPANION(&client->dev), 0); + } else { + ndev = of_property_read_variable_u32_array(np, + "ti,audio-slots", dev_addrs, 0, ARRAY_SIZE(dev_addrs)); + if (ndev <= 0) { + ndev = 1; + dev_addrs[0] = client->addr; + } + tas_dev->irq_info.irq_gpio = of_irq_get(np, 0); + } + tas_dev->ndev = ndev; + for (i = 0; i < ndev; i++) + tas_dev->tasdevice[i].dev_addr = dev_addrs[i]; + + if (ndev > 1) { + rc = of_property_read_u32(np, "ti,broadcast-addr", + &(tas_dev->glb_addr.dev_addr)); + if (rc) { + dev_err(tas_dev->dev, "Looking up node %s failed %d\n", + np->full_name, rc); + tas_dev->glb_addr.dev_addr = 0; + } + } + + tas_dev->ndev = ndev; + + tas_dev->reset = devm_gpiod_get_optional(&client->dev, + "reset-gpios", GPIOD_OUT_HIGH); + if (IS_ERR(tas_dev->reset)) + dev_err(tas_dev->dev, "%s ERROR: Can't get reset GPIO\n", + __func__); + + strcpy(tas_dev->dev_name, tasdevice_id[tas_dev->chip_id].name); + + tas_dev->irq_info.irq_gpio = of_get_named_gpio(np, + "interrupts", 0); + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) { + rc = gpio_request(tas_dev->irq_info.irq_gpio, + "AUDEV-IRQ"); + if (!rc) { + gpio_direction_input( + tas_dev->irq_info.irq_gpio); + + tas_dev->irq_info.irq = + gpio_to_irq(tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, "%s: GPIO %d request error\n", + __func__, tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, + "Looking up irq-gpio property in node %s failed %d\n", + np->full_name, tas_dev->irq_info.irq_gpio); + + return 0; +} + +static int tasdevice_change_chn_book(struct tasdevice_priv *tas_dev, + enum channel chn, int book) +{ + int ret = 0; + struct i2c_client *client = + (struct i2c_client *)tas_dev->client; + + if (chn < tas_dev->ndev) { + if (tas_dev->glb_addr.ref_cnt != 0) { + tas_dev->glb_addr.ref_cnt = 0; + tas_dev->glb_addr.cur_book = -1; + } + client->addr = tas_dev->tasdevice[chn].dev_addr; + if (tas_dev->tasdevice[chn].cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + goto out; + } + tas_dev->tasdevice[chn].cur_book = book; + } + } else if (chn == tas_dev->ndev) { + int i = 0; + + if (tas_dev->glb_addr.ref_cnt == 0) + for (i = 0; i < tas_dev->ndev; i++) + tas_dev->tasdevice[i].cur_book = -1; + client->addr = tas_dev->glb_addr.dev_addr; + if (tas_dev->glb_addr.cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_PAGE, 0); + if (ret < 0) { + dev_err(tas_dev->dev, + "%s, 0ERROR, E=%d\n", + __func__, ret); + goto out; + } + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, + "%s, book%xERROR, E=%d\n", + __func__, book, ret); + goto out; + } + tas_dev->glb_addr.cur_book = book; + } + + tas_dev->glb_addr.ref_cnt++; + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + +out: + return ret; +} + +int tasdevice_dev_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int *val) +{ + int ret = 0; + + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), val); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR,E=%d\n", + __func__, ret); + } else { + + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + } + +out: + return ret; +} + +int tasdevice_dev_write(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int value) +{ + int ret = 0; + + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); +out: + return ret; +} + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", __func__, + ret); + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); +out: + return ret; +} + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + +out: + return ret; +} + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value) +{ + int ret = 0; + struct i2c_client *client = + (struct i2c_client *)tas_dev->client; + + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + client->addr = tas_dev->tasdevice[chn].dev_addr; + ret = regmap_update_bits(tas_dev->regmap, + TASDEVICE_PGRG(reg), mask, value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else { + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + ret = -1; + } + +out: + return ret; +} + +static void tas2781_set_global_mode(struct tasdevice_priv *tas_dev) +{ + int i = 0; + int ret = 0; + + for (; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + TAS2871_MISC_CFG2, TAS2871_GLOBAL_ADDR_MASK, + TAS2871_GLOBAL_ADDR_ENABLE); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: chn %d set glb fail, %d\n", + __func__, i, ret); + continue; + } + } +} + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret, i; + + tas_dev->cur_prog = -1; + tas_dev->cur_conf = -1; + + for (i = 0; i < tas_dev->ndev; i++) { + tas_dev->tasdevice[i].cur_book = -1; + tas_dev->tasdevice[i].cur_prog = -1; + tas_dev->tasdevice[i].cur_conf = -1; + } + + if (tas_dev->glb_addr.dev_addr != 0 + && tas_dev->glb_addr.dev_addr < 0x7F) + tas_dev->set_global_mode = tas2781_set_global_mode; + dev_set_drvdata(tas_dev->dev, tas_dev); + + mutex_init(&tas_dev->codec_lock); + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:0x%08x\n", + __func__, ret); + goto out; + } + +out: + return ret; +} + +static void tasdevice_remove(struct tasdevice_priv *tas_dev) +{ + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) + gpio_free(tas_dev->irq_info.irq_gpio); + + mutex_destroy(&tas_dev->codec_lock); +} + +static int tasdevice_i2c_probe(struct i2c_client *i2c) +{ + struct tasdevice_priv *tas_dev = NULL; + int ret; + const struct acpi_device_id *acpi_id; + const struct i2c_device_id *id = i2c_match_id(tasdevice_id, i2c); + + tas_dev = devm_kzalloc(&i2c->dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) { + ret = -ENOMEM; + goto out; + } + + if (ACPI_HANDLE(&i2c->dev)) { + acpi_id = acpi_match_device(i2c->dev.driver->acpi_match_table, + &i2c->dev); + if (!acpi_id) { + dev_err(&i2c->dev, "No driver data\n"); + ret = -EINVAL; + goto out; + } + tas_dev->chip_id = acpi_id->driver_data; + tas_dev->isacpi = true; + } else { + tas_dev->chip_id = (id != NULL) ? id->driver_data : 0; + tas_dev->isacpi = false; + } + + tas_dev->dev = &i2c->dev; + tas_dev->client = (void *)i2c; + + if (i2c->dev.of_node) + ret = tasdevice_parse_dt(tas_dev); + else { + dev_err(tas_dev->dev, "No DTS info\n"); + goto out; + } + + tas_dev->regmap = devm_regmap_init_i2c(i2c, + &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) { + ret = PTR_ERR(tas_dev->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + goto out; + } + ret = tasdevice_init(tas_dev); + +out: + if (ret < 0 && tas_dev != NULL) + tasdevice_remove(tas_dev); + return ret; + +} + +static void tasdevice_i2c_remove(struct i2c_client *client) +{ + struct tasdevice_priv *tas_dev = i2c_get_clientdata(client); + + tasdevice_remove(tas_dev); + +} + +#ifdef CONFIG_ACPI +static const struct acpi_device_id tasdevice_acpi_match[] = { + { "TAS2781", TAS2781 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, tasdevice_acpi_match); +#endif + +static struct i2c_driver tasdevice_i2c_driver = { + .driver = { + .name = "tas2781-codec", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tasdevice_of_match), + .acpi_match_table = ACPI_PTR(tasdevice_acpi_match), + }, + .probe = tasdevice_i2c_probe, + .remove = tasdevice_i2c_remove, + .id_table = tasdevice_id, +}; + +module_i2c_driver(tasdevice_i2c_driver); + +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_AUTHOR("Kevin Lu <kevin-lu(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2781 Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2781.h b/sound/soc/codecs/tas2781.h new file mode 100644 index 000000000000..383a330df865 --- /dev/null +++ b/sound/soc/codecs/tas2781.h @@ -0,0 +1,169 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TAS2781_H__ +#define __TAS2781_H__ + +#include "tas2781-dsp.h" + +#define TAS2781_DRV_VER 1 /* version number */ +#define SMARTAMP_MODULE_NAME "tas2781" +#define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\ + SNDRV_PCM_RATE_88200) +#define TASDEVICE_MAX_CHANNELS 8 + +#define TASDEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/*PAGE Control Register (available in page0 of each book) */ +#define TASDEVICE_PAGE_SELECT 0x00 +#define TASDEVICE_BOOKCTL_PAGE 0x00 +#define TASDEVICE_BOOKCTL_REG 127 +#define TASDEVICE_BOOK_ID(reg) (reg / (256 * 128)) +#define TASDEVICE_PAGE_ID(reg) ((reg % (256 * 128)) / 128) +#define TASDEVICE_PAGE_REG(reg) ((reg % (256 * 128)) % 128) +#define TASDEVICE_PGRG(reg) ((reg % (256 * 128))) +#define TASDEVICE_REG(book, page, reg) (((book * 256 * 128) + \ + (page * 128)) + reg) + +/*Software Reset */ +#define TAS2871_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x02) +#define TAS2871_REG_SWRESET_RESET BIT(0) + +/* Enable Global addresses */ +#define TAS2871_MISC_CFG2 TASDEVICE_REG(0x0, 0X0, 0x07) +#define TAS2871_GLOBAL_ADDR_MASK BIT(1) +#define TAS2871_GLOBAL_ADDR_ENABLE BIT(1) + +/*I2C Checksum */ +#define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) + +/* Volume control */ +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) + +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + +enum audio_device { + TAS2781 = 0, +}; + +#define SMS_HTONS(a, b) ((((a)&0x00FF)<<8) | ((b)&0x00FF)) +#define SMS_HTONL(a, b, c, d) ((((a)&0x000000FF)<<24) | \ + (((b)&0x000000FF)<<16) | (((c)&0x000000FF)<<8) | \ + ((d)&0x000000FF)) + +struct tasdevice { + unsigned int dev_addr; + unsigned int err_code; + short cur_prog; + short cur_conf; + bool is_loading; + bool is_loaderr; + bool is_calibrated_data_loaded; + unsigned char cur_book; + struct tasdevice_fw *cali_data_fmw; +}; + +/* + * This item is used to store the generic i2c address of + * all the tas2781 devices for I2C broadcast during the multi-device + * writes, useless in mono case. + */ +struct global_addr { + unsigned char cur_book; + unsigned int dev_addr; + int ref_cnt; +}; + +struct tas_control { + struct snd_kcontrol_new *tasdevice_profile_controls; + int nr_controls; +}; + +struct tasdevice_irqinfo { + int irq_gpio; + int irq; +}; + +struct tasdevice_priv { + struct device *dev; + void *client; + struct regmap *regmap; + /* Lock for serialising dsp processing on this mutex */ + struct mutex codec_lock; + struct gpio_desc *reset; + struct tasdevice tasdevice[max_chn]; + struct tasdevice_fw *fmw; + struct tasdevice_rca rcabin; + struct tasdevice_irqinfo irq_info; + struct tas_control tas_ctrl; + struct global_addr glb_addr; + bool is_glb_calibrated_data_loaded; + bool isacpi; + int cur_prog; + int cur_conf; + unsigned int chip_id; + void (*set_global_mode)(struct tasdevice_priv *tas_dev); + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_dev, + const struct firmware *fmw, int offset); + int (*fw_parse_program_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*tasdevice_load_block)(struct tasdevice_priv *tas_dev, + struct tasdev_blk *pBlock); + int (*fw_parse_calibration_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int fw_state; + unsigned int magic_num; + unsigned char ndev; + unsigned char dev_name[32]; + unsigned char rca_binaryname[64]; + unsigned char coef_binaryname[64]; + unsigned char cal_binaryname[max_chn][64]; + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + void *codec; + unsigned int sysclk; +}; + +int tasdevice_dev_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int *value); +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize); +int tasdevice_dev_write(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int value); + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned char *p_data, unsigned int n_length); + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned char *p_data, + unsigned int n_length); + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value); + +#endif /*__TAS2781_H__ */ -- 2.34.1

4 3

[PATCH 000/173] ALSA/ASoC: Convert to platform remove callback returning void
by Uwe Kleine-König 21 Mar '23

21 Mar '23

Hello, this series adapts the platform drivers below sound/ to use the .remove_new() callback. Compared to the traditional .remove() callback .remove_new() returns no value. This is a good thing because the driver core doesn't (and cannot) cope for errors during remove. The only effect of a non-zero return value in .remove() is that the driver core emits a warning. The device is removed anyhow and an early return from .remove() usually yields a resource leak. By changing the remove callback to return void driver authors cannot reasonably assume any more that there is some kind of cleanup later. The first two patches simplify a driver each to return zero unconditionally, and then all drivers are trivially converted to .remove_new(). There are nearly no interdependencies in this patch set---only 1 <- 11 and 2 <- 16. So even if some individual problems are found (I don't expect that), the other patches can (and from my POV should) still be applied. Best regards Uwe Uwe Kleine-König (173): ALSA: sh: aica: Drop if blocks with always false condition ASoC: amd: acp: rembrandt: Drop if blocks with always false condition ALSA: pxa2xx: Convert to platform remove callback returning void ALSA: atmel: ac97: Convert to platform remove callback returning void ALSA: mts64: Convert to platform remove callback returning void ALSA: portman2x4: Convert to platform remove callback returning void ALSA: mips/hal2: Convert to platform remove callback returning void ALSA: mips/sgio2audio: Convert to platform remove callback returning void ALSA: hda/tegra: Convert to platform remove callback returning void ALSA: ppc/powermac: Convert to platform remove callback returning void ALSA: sh: aica: Convert to platform remove callback returning void ALSA: sh_dac_audio: Convert to platform remove callback returning void ASoC: adi: axi-i2s: Convert to platform remove callback returning void ASoC: adi: axi-spdif: Convert to platform remove callback returning void ASoC: amd: acp-pcm-dma: Convert to platform remove callback returning void ASoC: amd: acp: rembrandt: Convert to platform remove callback returning void ASoC: amd: acp: renoir: Convert to platform remove callback returning void ASoC: amd: ps: Convert to platform remove callback returning void ASoC: amd: raven: acp3x-pcm-dma: Convert to platform remove callback returning void ASoC: amd: raven: acp3x-pdm-dma: Convert to platform remove callback returning void ASoC: amd: vangogh: acp5x-pcm-dma: Convert to platform remove callback returning void ASoC: amd: yc: acp6x-pdm-dma: Convert to platform remove callback returning void ASoC: apple: mca: Convert to platform remove callback returning void ASoC: atmel: atmel-i2s: Convert to platform remove callback returning void ASoC: atmel: atmel_wm8904: Convert to platform remove callback returning void ASoC: atmel: mchp-i2s-mcc: Convert to platform remove callback returning void ASoC: atmel: mchp-pdmc: Convert to platform remove callback returning void ASoC: atmel: mchp-spdifrx: Convert to platform remove callback returning void ASoC: atmel: mchp-spdiftx: Convert to platform remove callback returning void ASoC: atmel: mikroe-proto: Convert to platform remove callback returning void ASoC: atmel: sam9g20_wm8731: Convert to platform remove callback returning void ASoC: atmel: sam9x5_wm8731: Convert to platform remove callback returning void ASoC: atmel: tse850-pcm5142: Convert to platform remove callback returning void ASoC: au1x: ac97c: Convert to platform remove callback returning void ASoC: au1x: i2sc: Convert to platform remove callback returning void ASoC: au1x: psc-ac97: Convert to platform remove callback returning void ASoC: au1x: psc-i2s: Convert to platform remove callback returning void ASoC: bcm: bcm63xx-i2s-whistler: Convert to platform remove callback returning void ASoC: bcm: cygnus-ssp: Convert to platform remove callback returning void ASoC: cirrus: edb93xx: Convert to platform remove callback returning void ASoC: cirrus: ep93xx-i2s: Convert to platform remove callback returning void ASoC: codecs: cs47l15: Convert to platform remove callback returning void ASoC: codecs: cs47l24: Convert to platform remove callback returning void ASoC: codecs: cs47l35: Convert to platform remove callback returning void ASoC: codecs: cs47l85: Convert to platform remove callback returning void ASoC: codecs: cs47l90: Convert to platform remove callback returning void ASoC: codecs: cs47l92: Convert to platform remove callback returning void ASoC: codecs: inno_rk3036: Convert to platform remove callback returning void ASoC: codecs: lpass-rx-macro: Convert to platform remove callback returning void ASoC: codecs: lpass-tx-macro: Convert to platform remove callback returning void ASoC: codecs: lpass-va-macro: Convert to platform remove callback returning void ASoC: codecs: lpass-wsa-macro: Convert to platform remove callback returning void ASoC: codecs: msm8916-wcd-analog: Convert to platform remove callback returning void ASoC: codecs: msm8916-wcd-digital: Convert to platform remove callback returning void ASoC: codecs: rk817_codec: Convert to platform remove callback returning void ASoC: codecs: wcd938x: Convert to platform remove callback returning void ASoC: codecs: wm5102: Convert to platform remove callback returning void ASoC: codecs: wm5110: Convert to platform remove callback returning void ASoC: codecs: wm8994: Convert to platform remove callback returning void ASoC: codecs: wm8997: Convert to platform remove callback returning void ASoC: codecs: wm8998: Convert to platform remove callback returning void ASoC: dwc: dwc-i2s: Convert to platform remove callback returning void ASoC: fsl: eukrea-tlv320: Convert to platform remove callback returning void ASoC: fsl: fsl_asrc: Convert to platform remove callback returning void ASoC: fsl: fsl_aud2htx: Convert to platform remove callback returning void ASoC: fsl: fsl_audmix: Convert to platform remove callback returning void ASoC: fsl: fsl_dma: Convert to platform remove callback returning void ASoC: fsl: fsl_easrc: Convert to platform remove callback returning void ASoC: fsl: fsl_esai: Convert to platform remove callback returning void ASoC: fsl: fsl_mqs: Convert to platform remove callback returning void ASoC: fsl: fsl_rpmsg: Convert to platform remove callback returning void ASoC: fsl: fsl_sai: Convert to platform remove callback returning void ASoC: fsl: fsl_spdif: Convert to platform remove callback returning void ASoC: fsl: fsl_ssi: Convert to platform remove callback returning void ASoC: fsl: fsl_xcvr: Convert to platform remove callback returning void ASoC: fsl: imx-audmux: Convert to platform remove callback returning void ASoC: fsl: imx-pcm-rpmsg: Convert to platform remove callback returning void ASoC: fsl: imx-sgtl5000: Convert to platform remove callback returning void ASoC: fsl: mpc5200_psc_ac97: Convert to platform remove callback returning void ASoC: fsl: mpc5200_psc_i2s: Convert to platform remove callback returning void ASoC: fsl: mpc8610_hpcd: Convert to platform remove callback returning void ASoC: fsl: p1022_ds: Convert to platform remove callback returning void ASoC: fsl: p1022_rdk: Convert to platform remove callback returning void ASoC: fsl: pcm030-audio-fabric: Convert to platform remove callback returning void ASoC: generic: test-component: Convert to platform remove callback returning void ASoC: img: img-i2s-in: Convert to platform remove callback returning void ASoC: img: img-i2s-out: Convert to platform remove callback returning void ASoC: img: img-parallel-out: Convert to platform remove callback returning void ASoC: img: img-spdif-in: Convert to platform remove callback returning void ASoC: img: img-spdif-out: Convert to platform remove callback returning void ASoC: img: pistachio-internal-dac: Convert to platform remove callback returning void ASoC: Intel: sst-mfld-platform-pcm: Convert to platform remove callback returning void ASoC: Intel: sst: Convert to platform remove callback returning void ASoC: Intel: bytcht_es8316: Convert to platform remove callback returning void ASoC: Intel: bytcr_rt5640: Convert to platform remove callback returning void ASoC: Intel: boards: bytcr_rt5651: Convert to platform remove callback returning void ASoC: Intel: bytcr_wm5102: Convert to platform remove callback returning void ASoC: Intel: cht_bsw_max98090_ti: Convert to platform remove callback returning void ASoC: Intel: sof_es8336: Convert to platform remove callback returning void ASoC: Intel: sof_pcm512x: Convert to platform remove callback returning void ASoC: Intel: sof_sdw: Convert to platform remove callback returning void ASoC: Intel: sof_wm8804: Convert to platform remove callback returning void ASoC: Intel: catpt: Convert to platform remove callback returning void ASoC: Intel: skl-ssp-clk: Convert to platform remove callback returning void ASoC: kirkwood: kirkwood-i2s: Convert to platform remove callback returning void ASoC: mediatek: mtk-btcvsd: Convert to platform remove callback returning void ASoC: mediatek: mt2701-afe-pcm: Convert to platform remove callback returning void ASoC: mediatek: mt6797-afe-pcm: Convert to platform remove callback returning void ASoC: mediatek: mt8173-afe-pcm: Convert to platform remove callback returning void ASoC: mediatek: mt8183-afe-pcm: Convert to platform remove callback returning void ASoC: mediatek: mt8188-afe-pcm: Convert to platform remove callback returning void ASoC: mediatek: mt8192-afe-pcm: Convert to platform remove callback returning void ASoC: mediatek: mt8195-afe-pcm: Convert to platform remove callback returning void ASoC: meson: aiu: Convert to platform remove callback returning void ASoC: mxs: mxs-sgtl5000: Convert to platform remove callback returning void ASoC: pxa: mmp-sspa: Convert to platform remove callback returning void ASoC: pxa: pxa2xx-ac97: Convert to platform remove callback returning void ASoC: qcom: qdsp6: Convert to platform remove callback returning void ASoC: rockchip: rockchip_i2s: Convert to platform remove callback returning void ASoC: rockchip: rockchip_i2s_tdm: Convert to platform remove callback returning void ASoC: rockchip: rockchip_pdm: Convert to platform remove callback returning void ASoC: rockchip: rockchip_rt5645: Convert to platform remove callback returning void ASoC: rockchip: rockchip_spdif: Convert to platform remove callback returning void ASoC: samsung: arndale: Convert to platform remove callback returning void ASoC: samsung: i2s: Convert to platform remove callback returning void ASoC: samsung: odroid: Convert to platform remove callback returning void ASoC: samsung: pcm: Convert to platform remove callback returning void ASoC: samsung: snow: Convert to platform remove callback returning void ASoC: samsung: spdif: Convert to platform remove callback returning void ASoC: sh: fsi: Convert to platform remove callback returning void ASoC: sh: hac: Convert to platform remove callback returning void ASoC: sh: rcar: Convert to platform remove callback returning void ASoC: sh: rz-ssi: Convert to platform remove callback returning void ASoC: sh: siu_dai: Convert to platform remove callback returning void ASoC: sprd: sprd-mcdt: Convert to platform remove callback returning void ASoC: stm: stm32_adfsdm: Convert to platform remove callback returning void ASoC: stm: stm32_i2s: Convert to platform remove callback returning void ASoC: stm: stm32_sai_sub: Convert to platform remove callback returning void ASoC: stm: stm32_spdifrx: Convert to platform remove callback returning void ASoC: sunxi: sun4i-codec: Convert to platform remove callback returning void ASoC: sunxi: sun4i-i2s: Convert to platform remove callback returning void ASoC: sunxi: sun4i-spdif: Convert to platform remove callback returning void ASoC: sunxi: sun50i-dmic: Convert to platform remove callback returning void ASoC: sunxi: sun8i-codec: Convert to platform remove callback returning void ASoC: tegra: tegra186_asrc: Convert to platform remove callback returning void ASoC: tegra: tegra186_dspk: Convert to platform remove callback returning void ASoC: tegra: tegra20_ac97: Convert to platform remove callback returning void ASoC: tegra: tegra20_i2s: Convert to platform remove callback returning void ASoC: tegra: tegra210_admaif: Convert to platform remove callback returning void ASoC: tegra: tegra210_adx: Convert to platform remove callback returning void ASoC: tegra: tegra210_ahub: Convert to platform remove callback returning void ASoC: tegra: tegra210_amx: Convert to platform remove callback returning void ASoC: tegra: tegra210_dmic: Convert to platform remove callback returning void ASoC: tegra: tegra210_i2s: Convert to platform remove callback returning void ASoC: tegra: tegra210_mixer: Convert to platform remove callback returning void ASoC: tegra: tegra210_mvc: Convert to platform remove callback returning void ASoC: tegra: tegra210_ope: Convert to platform remove callback returning void ASoC: tegra: tegra210_sfc: Convert to platform remove callback returning void ASoC: tegra: tegra30_ahub: Convert to platform remove callback returning void ASoC: tegra: tegra30_i2s: Convert to platform remove callback returning void ASoC: ti: ams-delta: Convert to platform remove callback returning void ASoC: ti: davinci-i2s: Convert to platform remove callback returning void ASoC: ti: davinci-mcasp: Convert to platform remove callback returning void ASoC: ti: omap-hdmi: Convert to platform remove callback returning void ASoC: ti: omap-mcbsp: Convert to platform remove callback returning void ASoC: uniphier: evea: Convert to platform remove callback returning void ASoC: ux500: mop500: Convert to platform remove callback returning void ASoC: ux500: ux500_msp_dai: Convert to platform remove callback returning void ASoC: xilinx: xlnx_formatter_pcm: Convert to platform remove callback returning void ASoC: xilinx: xlnx_spdif: Convert to platform remove callback returning void ASoC: xtensa: xtfpga-i2s: Convert to platform remove callback returning void ALSA: sparc/cs4231: Convert to platform remove callback returning void ALSA: sparc/dbri: Convert to platform remove callback returning void sound/arm/pxa2xx-ac97.c | 6 ++---- sound/atmel/ac97c.c | 6 ++---- sound/drivers/mts64.c | 6 ++---- sound/drivers/portman2x4.c | 6 ++---- sound/mips/hal2.c | 5 ++--- sound/mips/sgio2audio.c | 5 ++--- sound/pci/hda/hda_tegra.c | 6 ++---- sound/ppc/powermac.c | 5 ++--- sound/sh/aica.c | 7 ++----- sound/sh/sh_dac_audio.c | 5 ++--- sound/soc/adi/axi-i2s.c | 6 ++---- sound/soc/adi/axi-spdif.c | 6 ++---- sound/soc/amd/acp-pcm-dma.c | 6 ++---- sound/soc/amd/acp/acp-rembrandt.c | 13 +++---------- sound/soc/amd/acp/acp-renoir.c | 5 ++--- sound/soc/amd/ps/ps-pdm-dma.c | 5 ++--- sound/soc/amd/raven/acp3x-pcm-dma.c | 5 ++--- sound/soc/amd/renoir/acp3x-pdm-dma.c | 5 ++--- sound/soc/amd/vangogh/acp5x-pcm-dma.c | 5 ++--- sound/soc/amd/yc/acp6x-pdm-dma.c | 5 ++--- sound/soc/apple/mca.c | 5 ++--- sound/soc/atmel/atmel-i2s.c | 6 ++---- sound/soc/atmel/atmel_wm8904.c | 6 ++---- sound/soc/atmel/mchp-i2s-mcc.c | 6 ++---- sound/soc/atmel/mchp-pdmc.c | 6 ++---- sound/soc/atmel/mchp-spdifrx.c | 6 ++---- sound/soc/atmel/mchp-spdiftx.c | 6 ++---- sound/soc/atmel/mikroe-proto.c | 6 ++---- sound/soc/atmel/sam9g20_wm8731.c | 6 ++---- sound/soc/atmel/sam9x5_wm8731.c | 6 ++---- sound/soc/atmel/tse850-pcm5142.c | 6 ++---- sound/soc/au1x/ac97c.c | 6 ++---- sound/soc/au1x/i2sc.c | 6 ++---- sound/soc/au1x/psc-ac97.c | 6 ++---- sound/soc/au1x/psc-i2s.c | 6 ++---- sound/soc/bcm/bcm63xx-i2s-whistler.c | 5 ++--- sound/soc/bcm/cygnus-ssp.c | 6 ++---- sound/soc/cirrus/edb93xx.c | 6 ++---- sound/soc/cirrus/ep93xx-i2s.c | 5 ++--- sound/soc/codecs/cs47l15.c | 6 ++---- sound/soc/codecs/cs47l24.c | 6 ++---- sound/soc/codecs/cs47l35.c | 6 ++---- sound/soc/codecs/cs47l85.c | 6 ++---- sound/soc/codecs/cs47l90.c | 6 ++---- sound/soc/codecs/cs47l92.c | 6 ++---- sound/soc/codecs/inno_rk3036.c | 6 ++---- sound/soc/codecs/lpass-rx-macro.c | 6 ++---- sound/soc/codecs/lpass-tx-macro.c | 6 ++---- sound/soc/codecs/lpass-va-macro.c | 6 ++---- sound/soc/codecs/lpass-wsa-macro.c | 6 ++---- sound/soc/codecs/msm8916-wcd-analog.c | 6 ++---- sound/soc/codecs/msm8916-wcd-digital.c | 6 ++---- sound/soc/codecs/rk817_codec.c | 6 ++---- sound/soc/codecs/wcd938x.c | 6 ++---- sound/soc/codecs/wm5102.c | 6 ++---- sound/soc/codecs/wm5110.c | 6 ++---- sound/soc/codecs/wm8994.c | 6 ++---- sound/soc/codecs/wm8997.c | 6 ++---- sound/soc/codecs/wm8998.c | 6 ++---- sound/soc/dwc/dwc-i2s.c | 5 ++--- sound/soc/fsl/eukrea-tlv320.c | 6 ++---- sound/soc/fsl/fsl_asrc.c | 6 ++---- sound/soc/fsl/fsl_aud2htx.c | 6 ++---- sound/soc/fsl/fsl_audmix.c | 6 ++---- sound/soc/fsl/fsl_dma.c | 6 ++---- sound/soc/fsl/fsl_easrc.c | 6 ++---- sound/soc/fsl/fsl_esai.c | 6 ++---- sound/soc/fsl/fsl_mqs.c | 5 ++--- sound/soc/fsl/fsl_rpmsg.c | 6 ++---- sound/soc/fsl/fsl_sai.c | 6 ++---- sound/soc/fsl/fsl_spdif.c | 6 ++---- sound/soc/fsl/fsl_ssi.c | 6 ++---- sound/soc/fsl/fsl_xcvr.c | 5 ++--- sound/soc/fsl/imx-audmux.c | 6 ++---- sound/soc/fsl/imx-pcm-rpmsg.c | 6 ++---- sound/soc/fsl/imx-sgtl5000.c | 6 ++---- sound/soc/fsl/mpc5200_psc_ac97.c | 5 ++--- sound/soc/fsl/mpc5200_psc_i2s.c | 5 ++--- sound/soc/fsl/mpc8610_hpcd.c | 6 ++---- sound/soc/fsl/p1022_ds.c | 6 ++---- sound/soc/fsl/p1022_rdk.c | 6 ++---- sound/soc/fsl/pcm030-audio-fabric.c | 6 ++---- sound/soc/generic/test-component.c | 6 ++---- sound/soc/img/img-i2s-in.c | 6 ++---- sound/soc/img/img-i2s-out.c | 6 ++---- sound/soc/img/img-parallel-out.c | 6 ++---- sound/soc/img/img-spdif-in.c | 6 ++---- sound/soc/img/img-spdif-out.c | 6 ++---- sound/soc/img/pistachio-internal-dac.c | 6 ++---- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 5 ++--- sound/soc/intel/atom/sst/sst_acpi.c | 5 ++--- sound/soc/intel/boards/bytcht_es8316.c | 5 ++--- sound/soc/intel/boards/bytcr_rt5640.c | 5 ++--- sound/soc/intel/boards/bytcr_rt5651.c | 5 ++--- sound/soc/intel/boards/bytcr_wm5102.c | 5 ++--- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 6 ++---- sound/soc/intel/boards/sof_es8336.c | 6 ++---- sound/soc/intel/boards/sof_pcm512x.c | 6 ++---- sound/soc/intel/boards/sof_sdw.c | 6 ++---- sound/soc/intel/boards/sof_wm8804.c | 5 ++--- sound/soc/intel/catpt/device.c | 6 ++---- sound/soc/intel/skylake/skl-ssp-clk.c | 6 ++---- sound/soc/kirkwood/kirkwood-i2s.c | 6 ++---- sound/soc/mediatek/common/mtk-btcvsd.c | 5 ++--- sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 6 ++---- sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 6 ++---- sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 5 ++--- sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 6 ++---- sound/soc/mediatek/mt8188/mt8188-afe-pcm.c | 6 ++---- sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 5 ++--- sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 5 ++--- sound/soc/meson/aiu.c | 6 ++---- sound/soc/mxs/mxs-sgtl5000.c | 6 ++---- sound/soc/pxa/mmp-sspa.c | 7 +++---- sound/soc/pxa/pxa2xx-ac97.c | 5 ++--- sound/soc/qcom/qdsp6/q6routing.c | 6 ++---- sound/soc/rockchip/rockchip_i2s.c | 6 ++---- sound/soc/rockchip/rockchip_i2s_tdm.c | 6 ++---- sound/soc/rockchip/rockchip_pdm.c | 6 ++---- sound/soc/rockchip/rockchip_rt5645.c | 6 ++---- sound/soc/rockchip/rockchip_spdif.c | 6 ++---- sound/soc/samsung/arndale.c | 5 ++--- sound/soc/samsung/i2s.c | 8 +++----- sound/soc/samsung/odroid.c | 6 ++---- sound/soc/samsung/pcm.c | 6 ++---- sound/soc/samsung/snow.c | 6 ++---- sound/soc/samsung/spdif.c | 6 ++---- sound/soc/sh/fsi.c | 6 ++---- sound/soc/sh/hac.c | 5 ++--- sound/soc/sh/rcar/core.c | 6 ++---- sound/soc/sh/rz-ssi.c | 6 ++---- sound/soc/sh/siu_dai.c | 5 ++--- sound/soc/sprd/sprd-mcdt.c | 6 ++---- sound/soc/stm/stm32_adfsdm.c | 6 ++---- sound/soc/stm/stm32_i2s.c | 6 ++---- sound/soc/stm/stm32_sai_sub.c | 6 ++---- sound/soc/stm/stm32_spdifrx.c | 6 ++---- sound/soc/sunxi/sun4i-codec.c | 6 ++---- sound/soc/sunxi/sun4i-i2s.c | 6 ++---- sound/soc/sunxi/sun4i-spdif.c | 6 ++---- sound/soc/sunxi/sun50i-dmic.c | 6 ++---- sound/soc/sunxi/sun8i-codec.c | 6 ++---- sound/soc/tegra/tegra186_asrc.c | 6 ++---- sound/soc/tegra/tegra186_dspk.c | 6 ++---- sound/soc/tegra/tegra20_ac97.c | 6 ++---- sound/soc/tegra/tegra20_i2s.c | 6 ++---- sound/soc/tegra/tegra210_admaif.c | 6 ++---- sound/soc/tegra/tegra210_adx.c | 6 ++---- sound/soc/tegra/tegra210_ahub.c | 6 ++---- sound/soc/tegra/tegra210_amx.c | 6 ++---- sound/soc/tegra/tegra210_dmic.c | 6 ++---- sound/soc/tegra/tegra210_i2s.c | 6 ++---- sound/soc/tegra/tegra210_mixer.c | 6 ++---- sound/soc/tegra/tegra210_mvc.c | 6 ++---- sound/soc/tegra/tegra210_ope.c | 6 ++---- sound/soc/tegra/tegra210_sfc.c | 6 ++---- sound/soc/tegra/tegra30_ahub.c | 6 ++---- sound/soc/tegra/tegra30_i2s.c | 6 ++---- sound/soc/ti/ams-delta.c | 5 ++--- sound/soc/ti/davinci-i2s.c | 6 ++---- sound/soc/ti/davinci-mcasp.c | 6 ++---- sound/soc/ti/omap-hdmi.c | 5 ++--- sound/soc/ti/omap-mcbsp.c | 6 ++---- sound/soc/uniphier/evea.c | 6 ++---- sound/soc/ux500/mop500.c | 6 ++---- sound/soc/ux500/ux500_msp_dai.c | 6 ++---- sound/soc/xilinx/xlnx_formatter_pcm.c | 5 ++--- sound/soc/xilinx/xlnx_spdif.c | 5 ++--- sound/soc/xtensa/xtfpga-i2s.c | 5 ++--- sound/sparc/cs4231.c | 6 ++---- sound/sparc/dbri.c | 6 ++---- 171 files changed, 345 insertions(+), 654 deletions(-) base-commit: fe15c26ee26efa11741a7b632e9f23b01aca4cc6 -- 2.39.2

17 226

[PATCH v3 1/5] ASoC: cs35l45: Support for GPIO pins configuration.
by Vlad Karpovich 21 Mar '23

21 Mar '23

From: "Vlad.Karpovich" <vkarpovi(a)opensource.cirrus.com> Adds device tree configuration for cs35l45 GPIOs Signed-off-by: Vlad Karpovich <vkarpovi(a)opensource.cirrus.com> --- include/dt-bindings/sound/cs35l45.h | 57 +++++++++++++++++++++++++++++ sound/soc/codecs/cs35l45-tables.c | 14 +++++++ sound/soc/codecs/cs35l45.c | 56 ++++++++++++++++++++++++++++ sound/soc/codecs/cs35l45.h | 27 +++++++++++++- 4 files changed, 152 insertions(+), 2 deletions(-) diff --git a/include/dt-bindings/sound/cs35l45.h b/include/dt-bindings/sound/cs35l45.h index 076da4b2c28d..25386af18445 100644 --- a/include/dt-bindings/sound/cs35l45.h +++ b/include/dt-bindings/sound/cs35l45.h @@ -17,4 +17,61 @@ #define CS35L45_ASP_TX_HIZ_UNUSED 0x1 #define CS35L45_ASP_TX_HIZ_DISABLED 0x2 +/* + * Optional GPIOX Sub-nodes: + * The cs35l45 node can have up to three "cirrus,gpio-ctrlX" ('X' = [1,2,3]) + * sub-nodes for configuring the GPIO pins. + * + * - gpio-dir : GPIO pin direction. Valid only when 'gpio-ctrl' + * is 1. + * 0 = Output + * 1 = Input (Default) + * + * - gpio-lvl : GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0. + * + * 0 = Low (Default) + * 1 = High + * + * - gpio-op-cfg : GPIO output configuration. Valid only when 'gpio-ctrl' is 1 + * and 'gpio-dir' is 0. + * + * 0 = CMOS (Default) + * 1 = Open Drain + * + * - gpio-pol : GPIO output polarity select. Valid only when 'gpio-ctrl' is 1 + * and 'gpio-dir' is 0. + * + * 0 = Non-inverted, Active High (Default) + * 1 = Inverted, Active Low + * + * - gpio-invert : Defines the polarity of the GPIO pin if configured + * as input. + * + * 0 = Not inverted (Default) + * 1 = Inverted + * + * - gpio-ctrl : Defines the function of the GPIO pin. + * + * GPIO1: + * 0 = High impedance input (Default) + * 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' + * 2 = Pin acts as MDSYNC, direction controlled by MDSYNC + * 3-7 = Reserved + * + * GPIO2: + * 0 = High impedance input (Default) + * 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' + * 2 = Pin acts as open drain INT + * 3 = Reserved + * 4 = Pin acts as push-pull output INT. Active low. + * 5 = Pin acts as push-pull output INT. Active high. + * 6,7 = Reserved + * + * GPIO3: + * 0 = High impedance input (Default) + * 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' + * 2-7 = Reserved + */ +#define CS35L45_NUM_GPIOS 0x3 + #endif /* DT_CS35L45_H */ diff --git a/sound/soc/codecs/cs35l45-tables.c b/sound/soc/codecs/cs35l45-tables.c index 5a2c2e684ef9..bca7e830821f 100644 --- a/sound/soc/codecs/cs35l45-tables.c +++ b/sound/soc/codecs/cs35l45-tables.c @@ -43,6 +43,9 @@ EXPORT_SYMBOL_NS_GPL(cs35l45_apply_patch, SND_SOC_CS35L45_TABLES); static const struct reg_default cs35l45_defaults[] = { { CS35L45_BLOCK_ENABLES, 0x00003323 }, { CS35L45_BLOCK_ENABLES2, 0x00000010 }, + { CS35L45_SYNC_GPIO1, 0x00000007 }, + { CS35L45_INTB_GPIO2_MCLK_REF, 0x00000005 }, + { CS35L45_GPIO3, 0x00000005 }, { CS35L45_REFCLK_INPUT, 0x00000510 }, { CS35L45_GLOBAL_SAMPLE_RATE, 0x00000003 }, { CS35L45_ASP_ENABLES1, 0x00000000 }, @@ -61,6 +64,9 @@ static const struct reg_default cs35l45_defaults[] = { { CS35L45_ASPTX4_INPUT, 0x00000028 }, { CS35L45_ASPTX5_INPUT, 0x00000048 }, { CS35L45_AMP_PCM_CONTROL, 0x00100000 }, + { CS35L45_GPIO1_CTRL1, 0x81000001 }, + { CS35L45_GPIO2_CTRL1, 0x81000001 }, + { CS35L45_GPIO3_CTRL1, 0x81000001 }, }; static bool cs35l45_readable_reg(struct device *dev, unsigned int reg) @@ -72,6 +78,9 @@ static bool cs35l45_readable_reg(struct device *dev, unsigned int reg) case CS35L45_BLOCK_ENABLES: case CS35L45_BLOCK_ENABLES2: case CS35L45_ERROR_RELEASE: + case CS35L45_SYNC_GPIO1: + case CS35L45_INTB_GPIO2_MCLK_REF: + case CS35L45_GPIO3: case CS35L45_REFCLK_INPUT: case CS35L45_GLOBAL_SAMPLE_RATE: case CS35L45_ASP_ENABLES1: @@ -92,6 +101,10 @@ static bool cs35l45_readable_reg(struct device *dev, unsigned int reg) case CS35L45_AMP_PCM_CONTROL: case CS35L45_AMP_PCM_HPF_TST: case CS35L45_IRQ1_EINT_4: + case CS35L45_GPIO_STATUS1: + case CS35L45_GPIO1_CTRL1: + case CS35L45_GPIO2_CTRL1: + case CS35L45_GPIO3_CTRL1: return true; default: return false; @@ -107,6 +120,7 @@ static bool cs35l45_volatile_reg(struct device *dev, unsigned int reg) case CS35L45_ERROR_RELEASE: case CS35L45_AMP_PCM_HPF_TST: /* not cachable */ case CS35L45_IRQ1_EINT_4: + case CS35L45_GPIO_STATUS1: return true; default: return false; diff --git a/sound/soc/codecs/cs35l45.c b/sound/soc/codecs/cs35l45.c index d15b3b77c7eb..901f3647fbda 100644 --- a/sound/soc/codecs/cs35l45.c +++ b/sound/soc/codecs/cs35l45.c @@ -536,7 +536,63 @@ static int __maybe_unused cs35l45_runtime_resume(struct device *dev) static int cs35l45_apply_property_config(struct cs35l45_private *cs35l45) { + struct device_node *node = cs35l45->dev->of_node; + unsigned int gpio_regs[] = {CS35L45_GPIO1_CTRL1, CS35L45_GPIO2_CTRL1, + CS35L45_GPIO3_CTRL1}; + unsigned int pad_regs[] = {CS35L45_SYNC_GPIO1, + CS35L45_INTB_GPIO2_MCLK_REF, CS35L45_GPIO3}; + struct device_node *child; unsigned int val; + char of_name[32]; + int ret, i; + + if (!node) + return 0; + + for (i = 0; i < CS35L45_NUM_GPIOS; i++) { + sprintf(of_name, "cirrus,gpio-ctrl%d", i + 1); + child = of_get_child_by_name(node, of_name); + if (!child) + continue; + + ret = of_property_read_u32(child, "gpio-dir", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_DIR_MASK, + val << CS35L45_GPIO_DIR_SHIFT); + + ret = of_property_read_u32(child, "gpio-lvl", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_LVL_MASK, + val << CS35L45_GPIO_LVL_SHIFT); + + ret = of_property_read_u32(child, "gpio-op-cfg", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_OP_CFG_MASK, + val << CS35L45_GPIO_OP_CFG_SHIFT); + + ret = of_property_read_u32(child, "gpio-pol", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_POL_MASK, + val << CS35L45_GPIO_POL_SHIFT); + + ret = of_property_read_u32(child, "gpio-ctrl", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, pad_regs[i], + CS35L45_GPIO_CTRL_MASK, + val << CS35L45_GPIO_CTRL_SHIFT); + + ret = of_property_read_u32(child, "gpio-invert", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, pad_regs[i], + CS35L45_GPIO_INVERT_MASK, + val << CS35L45_GPIO_INVERT_SHIFT); + + of_node_put(child); + } if (device_property_read_u32(cs35l45->dev, "cirrus,asp-sdout-hiz-ctrl", &val) == 0) { diff --git a/sound/soc/codecs/cs35l45.h b/sound/soc/codecs/cs35l45.h index 53fe9d2b7b15..f3a54fc57d53 100644 --- a/sound/soc/codecs/cs35l45.h +++ b/sound/soc/codecs/cs35l45.h @@ -14,6 +14,7 @@ #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <dt-bindings/sound/cs35l45.h> #define CS35L45_DEVID 0x00000000 #define CS35L45_REVID 0x00000004 @@ -24,6 +25,9 @@ #define CS35L45_BLOCK_ENABLES 0x00002018 #define CS35L45_BLOCK_ENABLES2 0x0000201C #define CS35L45_ERROR_RELEASE 0x00002034 +#define CS35L45_SYNC_GPIO1 0x00002430 +#define CS35L45_INTB_GPIO2_MCLK_REF 0x00002434 +#define CS35L45_GPIO3 0x00002438 #define CS35L45_REFCLK_INPUT 0x00002C04 #define CS35L45_GLOBAL_SAMPLE_RATE 0x00002C0C #define CS35L45_BOOST_CCM_CFG 0x00003808 @@ -48,8 +52,11 @@ #define CS35L45_AMP_PCM_CONTROL 0x00007000 #define CS35L45_AMP_PCM_HPF_TST 0x00007004 #define CS35L45_IRQ1_EINT_4 0x0000E01C -#define CS35L45_LASTREG 0x0000E01C - +#define CS35L45_GPIO_STATUS1 0x0000F000 +#define CS35L45_GPIO1_CTRL1 0x0000F008 +#define CS35L45_GPIO2_CTRL1 0x0000F00C +#define CS35L45_GPIO3_CTRL1 0x0000F010 +#define CS35L45_LASTREG 0x0000F010 /* SFT_RESET */ #define CS35L45_SOFT_RESET_TRIGGER 0x5A000000 @@ -165,6 +172,22 @@ #define CS35L45_OTP_BOOT_DONE_STS_MASK BIT(1) #define CS35L45_OTP_BUSY_MASK BIT(0) +/* GPIOX_CTRL1 */ +#define CS35L45_GPIO_DIR_SHIFT 31 +#define CS35L45_GPIO_DIR_MASK BIT(31) +#define CS35L45_GPIO_LVL_SHIFT 15 +#define CS35L45_GPIO_LVL_MASK BIT(15) +#define CS35L45_GPIO_OP_CFG_SHIFT 14 +#define CS35L45_GPIO_OP_CFG_MASK BIT(14) +#define CS35L45_GPIO_POL_SHIFT 12 +#define CS35L45_GPIO_POL_MASK BIT(12) + +/* SYNC_GPIO1, INTB_GPIO2_MCLK_REF, GPIO3 */ +#define CS35L45_GPIO_CTRL_SHIFT 20 +#define CS35L45_GPIO_CTRL_MASK GENMASK(22, 20) +#define CS35L45_GPIO_INVERT_SHIFT 19 +#define CS35L45_GPIO_INVERT_MASK BIT(19) + /* Mixer sources */ #define CS35L45_PCM_SRC_MASK 0x7F #define CS35L45_PCM_SRC_ZERO 0x00 -- 2.25.1

2 6

[PATCH v3 0/8] ASoC: Initial support for Cirrus Logic CS35L56
by Richard Fitzgerald 21 Mar '23

21 Mar '23

The CS35L56 is a high-performance boosted mono audio amplifier. Supported control interfaces are I2C, SPI or SoundWire. Supported audio interfaces are I2S/TDM or SoundWire. The CS35L56 has a self-booting firmware in ROM, with the ability to patch the firmware and/or apply tunings. Patches #1 to #7 add support to cs_dsp and wm_adsp for self-booting firmware and the ability to apply a .bin file without having to apply a .wmfw. Changes since v2: - Fix Kconfig to prevent the driver being built-in if the SoundWire core is a module. Changes since v1: - Check for error when getting pm_runtime in cs35l56_irq(). - Use SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK instead of the old define. - Re-word two comments in cs35l56-sdw.c. - Add an comment explaining the wait for init_completion in cs35l56_dsp_work(). - Omit patches to Intel machine driver. These will be done as a separate thread. Richard Fitzgerald (1): ASoC: cs35l56: Add driver for Cirrus Logic CS35L56 Simon Trimmer (7): firmware: cs_dsp: Introduce no_core_startstop for self-booting DSPs ASoC: wm_adsp: Use no_core_startstop to prevent creating preload control firmware: cs_dsp: Support DSPs that don't require firmware download ASoC: wm_adsp: Support DSPs that don't require firmware download ASoC: wm_adsp: Expose the DSP boot work actions as wm_adsp_power_up() ASoC: wm_adsp: Add support for loading bin files without wmfw ASoC: wm_adsp: Simplify the logging of requested firmware files MAINTAINERS | 1 + drivers/firmware/cirrus/cs_dsp.c | 17 +- include/linux/firmware/cirrus/cs_dsp.h | 1 + include/sound/cs35l56.h | 266 +++++ sound/soc/codecs/Kconfig | 40 + sound/soc/codecs/Makefile | 10 + sound/soc/codecs/cs35l56-i2c.c | 83 ++ sound/soc/codecs/cs35l56-sdw.c | 528 +++++++++ sound/soc/codecs/cs35l56-shared.c | 390 +++++++ sound/soc/codecs/cs35l56-spi.c | 81 ++ sound/soc/codecs/cs35l56.c | 1461 ++++++++++++++++++++++++ sound/soc/codecs/cs35l56.h | 77 ++ sound/soc/codecs/wm_adsp.c | 63 +- sound/soc/codecs/wm_adsp.h | 3 + 14 files changed, 3005 insertions(+), 16 deletions(-) create mode 100644 include/sound/cs35l56.h create mode 100644 sound/soc/codecs/cs35l56-i2c.c create mode 100644 sound/soc/codecs/cs35l56-sdw.c create mode 100644 sound/soc/codecs/cs35l56-shared.c create mode 100644 sound/soc/codecs/cs35l56-spi.c create mode 100644 sound/soc/codecs/cs35l56.c create mode 100644 sound/soc/codecs/cs35l56.h -- 2.30.2

2 9

[bug report] ASoC: SOF: ipc4-control: Add support for bytes control get and put
by Dan Carpenter 21 Mar '23

21 Mar '23

Hello Peter Ujfalusi, The patch a062c8899fed: "ASoC: SOF: ipc4-control: Add support for bytes control get and put" from Mar 13, 2023, leads to the following Smatch static checker warning: sound/soc/sof/ipc4-control.c:436 sof_ipc4_widget_kcontrol_setup() warn: iterator used outside loop: 'scontrol' sound/soc/sof/ipc4-control.c 411 static int sof_ipc4_widget_kcontrol_setup(struct snd_sof_dev *sdev, struct snd_sof_widget *swidget) 412 { 413 struct snd_sof_control *scontrol; 414 int ret = 0; 415 416 list_for_each_entry(scontrol, &sdev->kcontrol_list, list) { 417 if (scontrol->comp_id == swidget->comp_id) { 418 switch (scontrol->info_type) { 419 case SND_SOC_TPLG_CTL_VOLSW: 420 case SND_SOC_TPLG_CTL_VOLSW_SX: 421 case SND_SOC_TPLG_CTL_VOLSW_XR_SX: 422 ret = sof_ipc4_set_volume_data(sdev, swidget, 423 scontrol, false); 424 break; 425 case SND_SOC_TPLG_CTL_BYTES: 426 ret = sof_ipc4_set_get_bytes_data(sdev, scontrol, 427 true, false); 428 break; This breaks out of the switch statement and not the loop. So that means that it will continue through the loop and ret is reset. 429 default: 430 break; 431 } 432 } 433 } 434 435 if (ret < 0) --> 436 dev_err(sdev->dev, "kcontrol %d set up failed for widget %s\n", 437 scontrol->comp_id, swidget->widget->name); ^^^^^^^^^^^^^^^^^ "scontrol" cannot be a valid pointer at this stage. It is always an offset off the &sdev->kcontrol_list because of the above issue. 438 439 return ret; 440 } regards, dan carpenter

2 1

[PATCH] ASoC: cs35l41: Add 12288000 clk freq to cs35l41_fs_mon clk config
by Jianhua Lu 21 Mar '23

21 Mar '23

There are 8 cs35l41 speaker amplifier connected to TDM in my Xiaomi Mi Pad 5 Pro tablet. In this case, it's necessary to set 12288000 (48000 * 32 * 8) clk freq for it. rate=48000, slot_width=32, slots=8. Signed-off-by: Jianhua Lu <lujianhua000(a)gmail.com> --- sound/soc/codecs/cs35l41.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/cs35l41.c b/sound/soc/codecs/cs35l41.c index 9ec01a5f09ca..6ac501f008ec 100644 --- a/sound/soc/codecs/cs35l41.c +++ b/sound/soc/codecs/cs35l41.c @@ -150,6 +150,7 @@ static const struct cs35l41_fs_mon_config cs35l41_fs_mon[] = { { 5644800, 16, 24 }, { 6000000, 16, 24 }, { 6144000, 16, 24 }, + { 12288000, 0, 0 }, }; static int cs35l41_get_fs_mon_config_index(int freq) -- 2.39.2

3 2

ALC4080 - ASRock X670E Taichi
by GitHub issues - reopened 21 Mar '23

21 Mar '23

alsa-project/alsa-ucm-conf issue #229 was reopened from hendrikb-101: This board's ALC4082 seems to be sitting here: `26ce:0a06 Generic USB Audio` After trying out the latest UCM configuration I also tried adding this to my USB-Audio.conf: `# 26ce:0a06 ASRock X670E Taichi` `Regex "USB((26ce:0a06)|(0414:a00e)|(0b05:(1996|1a(16|2[07])))|(0db0:(005a|151f|1feb|419c|82c7|a073|a47c|b202)))"` but no dice (still recognized as "Generic USB Audio" and ports don't work). Sound works in Windows 11 and manually playing a sound like that works: `aplay -D plughw:Audio,1 /usr/share/sounds/alsa/Front_Left.wav ` Is there anything else different on this board besides the device's id?! This is my [alsa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/9771968/…. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/229 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Tegra: add UCM configuration for RT5631, WM8903 and MAX98089 based devices
by GitHub pull_request - reopened 21 Mar '23

21 Mar '23

alsa-project/alsa-ucm-conf pull request #291 was reopened from clamor-s: Proposed UCM configurations were tested for a while on wide range of devices. Did not cause any issues so far. List of supported devices using RT5631: - ASUS TF201 - ASUS TF300TG - ASUS TF300TL - ASUS TF700T using WM8903: - ASUS TF101 - ASUS SL101 - ASUS TF300T using MAX98089 - LG P880 - LG P895 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/291 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/291.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v4] ASoC: tas2781: Add tas2781 driver
by Shenghao Ding 20 Mar '23

20 Mar '23

Create tas2781 driver. Signed-off-by: Shenghao Ding <13916275206(a)139.com> --- Changes in v4: - make the entire comment block a C++ one - remove uncessary dbg log in the firmware downlaoding - remove simliar macro already defined in ALSA header - use crc8_populate_msb() to generate the crc lookup table - remove all the hungarian notation in the code - remove log failures to allocate - add comment for tas2781_digital_getvol on the reason to custom control, tas2781 contain book and page two-level regmap, especially book switching will set the book swithc register, which is BXXP00R7F, after switching to the correct book, then the code can leverage the internal mechanism for paging, and access the register. - return 1 in all of the put control callback - fix "Control names for volumes should end with Volume" - remove the Lock in the control callback functions - remove likely() or unlikely(). - remove uncessary GPIO check for irq - remove unused functions - remove i2c check in the i2c probe Changes to be committed: modified: sound/soc/codecs/Kconfig modified: sound/soc/codecs/Makefile new file: sound/soc/codecs/tas2781-dsp.c new file: sound/soc/codecs/tas2781-dsp.h new file: sound/soc/codecs/tas2781-i2c.c new file: sound/soc/codecs/tas2781.h --- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2781-dsp.c | 2192 ++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2781-dsp.h | 178 +++ sound/soc/codecs/tas2781-i2c.c | 1655 ++++++++++++++++++++++++ sound/soc/codecs/tas2781.h | 170 +++ 6 files changed, 4209 insertions(+) create mode 100644 sound/soc/codecs/tas2781-dsp.c create mode 100644 sound/soc/codecs/tas2781-dsp.h create mode 100644 sound/soc/codecs/tas2781-i2c.c create mode 100644 sound/soc/codecs/tas2781.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 07747565c3b5..e1afe1ced5d7 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -229,6 +229,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2764 imply SND_SOC_TAS2770 imply SND_SOC_TAS2780 + imply SND_SOC_TAS2781 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1637,6 +1638,17 @@ config SND_SOC_TAS2780 Enable support for Texas Instruments TAS2780 high-efficiency digital input mono Class-D audio power amplifiers. +config SND_SOC_TAS2781 + tristate "Texas Instruments TAS2781 speaker amplifier" + depends on I2C + select REGMAP_I2C + select CRC8 + help + Enable support for Texas Instruments TAS2781 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + Note the TAS2781 driver implements a flexible and configurable + algo coff setting, for one, two, even multiple TAS2781 chips. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f1ca18f7946c..5559b9e9cc17 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -262,6 +262,7 @@ snd-soc-tas5805m-objs := tas5805m.o snd-soc-tas6424-objs := tas6424.o snd-soc-tda7419-objs := tda7419.o snd-soc-tas2770-objs := tas2770.o +snd-soc-tas2781-objs := tas2781-i2c.o tas2781-dsp.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -619,6 +620,7 @@ obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o +obj-$(CONFIG_SND_SOC_TAS2781) += snd-soc-tas2781.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2781-dsp.c b/sound/soc/codecs/tas2781-dsp.c new file mode 100644 index 000000000000..2a1f0bbb95a5 --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.c @@ -0,0 +1,2192 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/string.h> +#include <linux/crc8.h> +#include <linux/slab.h> +#include <linux/fs.h> +#include <linux/firmware.h> + +#include "tas2781.h" + +#define ERROR_PRAM_CRCCHK 0x0000000 +#define ERROR_YRAM_CRCCHK 0x0000001 +#define BINFILE_VER 0 +#define DRV_VER 1 +#define PPC_DRIVER_CRCCHK 0x00000200 + +#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) +#define TAS2781_YRAM_BOOK1 140 +#define TAS2781_YRAM1_PAGE 42 +#define TAS2781_YRAM1_START_REG 88 + +#define TAS2781_YRAM2_START_PAGE 43 +#define TAS2781_YRAM2_END_PAGE 49 +#define TAS2781_YRAM2_START_REG 8 +#define TAS2781_YRAM2_END_REG 127 + +#define TAS2781_YRAM3_PAGE 50 +#define TAS2781_YRAM3_START_REG 8 +#define TAS2781_YRAM3_END_REG 27 + +/*should not include B0_P53_R44-R47 */ +#define TAS2781_YRAM_BOOK2 0 +#define TAS2781_YRAM4_START_PAGE 50 +#define TAS2781_YRAM4_END_PAGE 60 + +#define TAS2781_YRAM5_PAGE 61 +#define TAS2781_YRAM5_START_REG 8 +#define TAS2781_YRAM5_END_REG 27 + +#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 +#define MAIN_ALL_DEVICES_1X 0x01 +#define MAIN_DEVICE_A_1X 0x02 +#define MAIN_DEVICE_B_1X 0x03 +#define MAIN_DEVICE_C_1X 0x04 +#define MAIN_DEVICE_D_1X 0x05 +#define COEFF_DEVICE_A_1X 0x12 +#define COEFF_DEVICE_B_1X 0x13 +#define COEFF_DEVICE_C_1X 0x14 +#define COEFF_DEVICE_D_1X 0x15 +#define PRE_DEVICE_A_1X 0x22 +#define PRE_DEVICE_B_1X 0x23 +#define PRE_DEVICE_C_1X 0x24 +#define PRE_DEVICE_D_1X 0x25 + +struct tas_crc { + unsigned char offset; + unsigned char len; +}; + +const char deviceNumber[TASDEVICE_DSP_TAS_MAX_DEVICE] = { + 1, 2, 1, 2, 1, 1, 0, 2, 4, 3, 1, 2, 3, 4 +}; + +static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + block->type = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], + data[offset + 3]); + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mbPChkSumPresent error\n", + __func__); + offset = -1; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnPChkSum error\n", __func__); + offset = -1; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mbYChkSumPresent error\n", + __func__); + offset = -1; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnYChkSum error\n", __func__); + offset = -1; + goto out; + } + block->ychksum = data[offset]; + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: blk_size error\n", __func__); + offset = -1; + goto out; + } + block->blk_size = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); + offset = -1; + goto out; + } + block->nr_subblocks = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + block->data = kzalloc(block->blk_size, GFP_KERNEL); + if (block->data == NULL) { + offset = -1; + goto out; + } + memcpy(block->data, &data[offset], block->blk_size); + offset += block->blk_size; +out: + return offset; +} + +static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = fmw->data; + unsigned int nr_block; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + img_data->nr_blk = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], data[offset + 3]); + offset += 4; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (img_data->dev_blks == NULL) { + dev_err(tas_fmw->dev, "%s: FW memory failed!\n", __func__); + goto out; + } + + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + offset = fw_parse_block_data_kernel(tas_fmw, + &(img_data->dev_blks[nr_block]), fmw, offset); + if (offset < 0) { + offset = -1; + goto out; + } + } +out: + return offset; +} + +static int fw_parse_program_data_kernel( + struct tasdevice_priv *tas_dev, struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned int nr_program = 0; + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", + __func__); + offset = -1; + goto out; + } + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnAppMode error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPDMI2SMode error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnISnsPD error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnVSnsPD error\n", + __func__); + offset = -1; + goto out; + } + offset++; + //skip 3-byte reserved + offset += 3; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPowerLDG error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + offset = fw_parse_data_kernel(tas_fmw, &(program->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_configuration_data_kernel( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + unsigned int nr_configs; + struct tasdevice_config *config; + + for (nr_configs = 0; nr_configs < tas_fmw->nr_configurations; + nr_configs++) { + config = + &(tas_fmw->configs[nr_configs]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", + __func__); + offset = -1; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: orientation error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDevices error\n", + __func__); + offset = -1; + goto out; + } + offset += 1; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mProgram error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnSamplingRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPLLSrc error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFsRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPLLSrcRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 4; + offset = fw_parse_data_kernel(tas_fmw, + &(config->dev_data), fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_variable_header_kernel( + struct tasdevice_priv *tas_dev, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + const unsigned char *buf = fmw->data; + struct tasdevice_prog *program; + struct tasdevice_config *config; + unsigned int nr_program = 0, nr_configs = 0; + unsigned short max_confs = TASDEVICE_MAXCONFIG_NUM_KERNEL; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device_family = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "ERROR:%s:not TAS device\n", __func__); + offset = -1; + goto out; + } + offset += 2; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDevice error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "ERROR:%s: not support device %d\n", + __func__, fw_hdr->device); + offset = -1; + goto out; + } + offset += 2; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin dismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, tas_dev->ndev); + offset = -1; + goto out; + } + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPrograms error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_programs = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + if (tas_fmw->nr_programs == 0 || tas_fmw->nr_programs > + TASDEVICE_MAXPROGRAM_NUM_KERNEL) { + dev_err(tas_dev->dev, "%s: mnPrograms is invalid\n", __func__); + offset = -1; + goto out; + } + + if (offset + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { + dev_err(tas_dev->dev, "%s: mpPrograms error\n", __func__); + offset = -1; + goto out; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, + sizeof(struct tasdevice_prog), GFP_KERNEL); + if (tas_fmw->programs == NULL) { + dev_err(tas_dev->dev, "%s: mpPrograms memory failed!\n", + __func__); + offset = -1; + goto out; + } + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + program->prog_size = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + } + offset += (4 * (5 - nr_program)); + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnConfigurations error\n", + __func__); + offset = -1; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + max_confs = (fw_hdr->ndev >= 4) ? + TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS : + TASDEVICE_MAXCONFIG_NUM_KERNEL; + if (tas_fmw->nr_configurations == 0 || + tas_fmw->nr_configurations > max_confs) { + dev_err(tas_dev->dev, "%s: mnConfigurations is invalid\n", + __func__); + offset = -1; + goto out; + } + + if (offset + 4 * max_confs > fmw->size) { + dev_err(tas_dev->dev, "%s: mpConfigurations error\n", + __func__); + offset = -1; + goto out; + } + + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + if (tas_fmw->configs == NULL) { + offset = -1; + goto out; + } + + for (nr_configs = 0; nr_configs < tas_fmw->nr_programs; + nr_configs++) { + config = + &(tas_fmw->configs[nr_configs]); + config->cfg_size = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + } + + offset += (4 * (max_confs - nr_configs)); +out: + return offset; +} + +static int tasdevice_load_block_kernel( + struct tasdevice_priv *tasdevice, struct tasdev_blk *block) +{ + int ret = 0; + + unsigned char *data = block->data; + unsigned int i = 0, length = 0; + const unsigned int blk_size = block->blk_size; + unsigned char dev_idx = 0; + struct tasdevice_dspfw_hdr *fw_hdr = &(tasdevice->fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + + if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + switch (block->type) { + case MAIN_ALL_DEVICES_1X: + dev_idx = 0|0x80; + break; + case MAIN_DEVICE_A_1X: + dev_idx = 1|0x80; + break; + case COEFF_DEVICE_A_1X: + case PRE_DEVICE_A_1X: + dev_idx = 1|0xC0; + break; + case MAIN_DEVICE_B_1X: + dev_idx = 2|0x80; + break; + case COEFF_DEVICE_B_1X: + case PRE_DEVICE_B_1X: + dev_idx = 2|0xC0; + break; + case MAIN_DEVICE_C_1X: + dev_idx = 3|0x80; + break; + case COEFF_DEVICE_C_1X: + case PRE_DEVICE_C_1X: + dev_idx = 3|0xC0; + break; + case MAIN_DEVICE_D_1X: + dev_idx = 4|0x80; + break; + case COEFF_DEVICE_D_1X: + case PRE_DEVICE_D_1X: + dev_idx = 4|0xC0; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } else { + switch (block->type) { + case MAIN_ALL_DEVICES: + dev_idx = 0|0x80; + break; + case MAIN_DEVICE_A: + dev_idx = 1|0x80; + break; + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + dev_idx = 1|0xC0; + break; + case MAIN_DEVICE_B: + dev_idx = 2|0x80; + break; + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + dev_idx = 2|0xC0; + break; + case MAIN_DEVICE_C: + dev_idx = 3|0x80; + break; + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + dev_idx = 3|0xC0; + break; + case MAIN_DEVICE_D: + dev_idx = 4|0x80; + break; + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + dev_idx = 4|0xC0; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } + + for (i = 0; i < block->nr_subblocks; i++) { + int rc = tasdevice_process_block(tasdevice, data + length, + dev_idx, blk_size - length); + if (rc < 0) { + dev_err(tasdevice->dev, + "%s: ERROR:%u %u sublock write error\n", + __func__, length, blk_size); + break; + } + length += (unsigned int)rc; + if (blk_size < length) { + dev_err(tasdevice->dev, + "%s: ERROR:%u %u out of bounary\n", + __func__, length, blk_size); + break; + } + } + + return ret; +} + +static int fw_parse_variable_header_git(struct tasdevice_priv + *tas_dev, const struct firmware *fmw, int offset) +{ + const unsigned char *buf = fmw->data; + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + int i = strlen((char *)&buf[offset]); + + i++; + + if (offset + i > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + + offset += i; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "ERROR:%s: not TAS device\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "ERROR:%s: not support device %d\n", + __func__, fw_hdr->device); + offset = -1; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin dismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, + tas_dev->ndev); + offset = -1; + } + +out: + return offset; +} + +static int fw_parse_variable_hdr_cal(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *buf = fmw->data; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + int i = strlen((char *)&buf[offset]); + + i++; + + if (offset + i > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + + offset += i; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDeviceFamily error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "ERROR:%s: not TAS device\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDevice error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "ERROR:%s: not support device %d\n", + __func__, fw_hdr->device); + offset = -1; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != 1) { + dev_err(tas_dev->dev, + "%s: calbin must be 1, but currently ndev(%u)\n", + __func__, fw_hdr->ndev); + offset = -1; + } + +out: + return offset; +} + +static inline void tas2781_clear_calfirmware(struct tasdevice_fw + *tas_fmw) +{ + int i = 0; + unsigned int blks = 0; + + if (tas_fmw->calibrations) { + struct tasdevice_calibration *calibration; + + for (i = 0; i < tas_fmw->nr_calibrations; i++) { + calibration = &(tas_fmw->calibrations[i]); + if (calibration) { + struct tasdevice_data *im = + &(calibration->dev_data); + + if (im->dev_blks) { + struct tasdev_blk *block; + + for (blks = 0; blks < im->nr_blk; + blks++) { + block = &(im->dev_blks[blks]); + kfree(block->data); + } + kfree(im->dev_blks); + } + } + } + kfree(tas_fmw->calibrations); + } + kfree(tas_fmw); +} + +static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnType error\n", __func__); + offset = -1; + goto out; + } + block->type = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= + PPC_DRIVER_CRCCHK) { + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mbPChkSumPresent error\n", + __func__); + offset = -1; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnPChkSum error\n", + __func__); + offset = -1; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mbYChkSumPresent error\n", + __func__); + offset = -1; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnYChkSum error\n", + __func__); + offset = -1; + goto out; + } + block->ychksum = data[offset]; + offset++; + } else { + block->is_pchksum_present = 0; + block->is_ychksum_present = 0; + } + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnCommands error\n", __func__); + offset = -1; + goto out; + } + block->nr_cmds = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + n = block->nr_cmds * 4; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, + "%s: File Size(%lu) error offset = %d n = %d\n", + __func__, (unsigned long)fmw->size, offset, n); + offset = -1; + goto out; + } + block->data = kmemdup(&data[offset], n, GFP_KERNEL); + if (block->data == NULL) { + offset = -1; + goto out; + } + offset += n; +out: + return offset; +} + +static int fw_parse_data(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = (unsigned char *)fmw->data; + int n = 0; + unsigned int nr_block; + + if (offset + 64 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mpName error\n", __func__); + n = -1; + goto out; + } + memcpy(img_data->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, "%s: mpDescription error\n", __func__); + offset = -1; + goto out; + } + offset += n; + + if (offset + 2 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnBlocks error\n", __func__); + offset = -1; + goto out; + } + img_data->nr_blk = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (img_data->dev_blks == NULL) { + dev_err(tas_fmw->dev, "%s: FW memory failed!\n", __func__); + goto out; + } + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + offset = fw_parse_block_data(tas_fmw, + &(img_data->dev_blks[nr_block]), fmw, offset); + if (offset < 0) { + offset = -1; + goto out; + } + } +out: + return offset; +} + +static int fw_parse_calibration_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + unsigned int n = 0; + unsigned int nr_calibration = 0; + struct tasdevice_calibration *calibration = NULL; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnCalibrations error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_calibrations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_calibrations != 1) { + dev_err(tas_dev->dev, + "%s: only support one calibraiton(%d)!\n", + __func__, tas_fmw->nr_calibrations); + goto out; + } + + tas_fmw->calibrations = + kcalloc(tas_fmw->nr_calibrations, + sizeof(struct tasdevice_calibration), GFP_KERNEL); + if (tas_fmw->calibrations == NULL) { + dev_err(tas_dev->dev, "%s: mpCalibrations memory failed!\n", + __func__); + offset = -1; + goto out; + } + for (nr_calibration = 0; nr_calibration < tas_fmw->nr_calibrations; + nr_calibration++) { + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpCalibrations error\n", + __func__); + offset = -1; + goto out; + } + calibration = &(tas_fmw->calibrations[nr_calibration]); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDescription error\n", + __func__); + offset = -1; + goto out; + } + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, + "%s: mnProgram error, offset = %d\n", __func__, + offset); + offset = -1; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, + "%s: mnConfiguration error, offset = %d\n", + __func__, + offset); + offset = -1; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(calibration->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } + +out: + + return offset; +} + +static int fw_parse_program_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned char *buf = (unsigned char *)fmw->data; + int nr_program = 0; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_programs = SMS_HTONS(buf[offset], buf[offset + 1]); + offset += 2; + + if (tas_fmw->nr_programs == 0) { + dev_err(tas_dev->dev, "%s: mnPrograms is null, maybe calbin\n", + __func__); + //Do not "offset = -1;", because of calbin + goto out; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, sizeof(struct tasdevice_prog), + GFP_KERNEL); + if (tas_fmw->programs == NULL) { + offset = -1; + goto out; + } + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + int n = 0; + + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -1; + goto out; + } + offset += 64; + + n = strlen((char *)&buf[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDescription error\n", + __func__); + offset = -1; + goto out; + } + + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnAppMode error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPDMI2SMode error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnISnsPD error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnVSnsPD error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPowerLDG error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(program->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_configuration_data( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + unsigned int n_configs; + struct tasdevice_config *config; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_configurations == 0) { + dev_err(tas_dev->dev, "%s: Configurations is zero\n", + __func__); + //Do not "offset = -1;", because of calbin + goto out; + } + tas_fmw->configs = + kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + + for (n_configs = 0; n_configs < tas_fmw->nr_configurations; + n_configs++) { + config = + &(tas_fmw->configs[n_configs]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", + __func__); + offset = -1; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDescription error\n", + __func__); + offset = -1; + goto out; + } + + offset += n; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, + "%s: mnDevice_orientation error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mProgram error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnSamplingRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPLLSrc error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPLLSrcRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFsRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + offset = fw_parse_data(tas_fmw, &(config->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_header(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + const unsigned char *buf = (unsigned char *)fmw->data; + const unsigned char magic_number[] = { 0x35, 0x35, 0x35, 0x32 }; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + if (memcmp(&buf[offset], magic_number, 4)) { + dev_err(tas_dev->dev, "%s: Magic number doesn't match", + __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWSize error\n", __func__); + offset = -1; + goto out; + } + fw_fixed_hdr->fwsize = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + if (fw_fixed_hdr->fwsize != fmw->size) { + dev_err(tas_dev->dev, "File size not match, %lu %u", + (unsigned long)fmw->size, fw_fixed_hdr->fwsize); + offset = -1; + goto out; + } + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnChecksum error\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPPCVersion error\n", __func__); + offset = -1; + goto out; + } + fw_fixed_hdr->ppcver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWVersion error\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDriverVersion error\n", __func__); + offset = -1; + goto out; + } + fw_fixed_hdr->drv_ver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnTimeStamp error\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDDCName error\n", __func__); + offset = -1; + goto out; + } + offset += 64; + + out: + return offset; +} + +static int check_inpage_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + int ret = 0; + + if (book == TAS2781_YRAM_BOOK1) { + if (page == TAS2781_YRAM1_PAGE) { + if (reg >= TAS2781_YRAM1_START_REG) { + cd->offset = reg; + cd->len = len; + ret = 1; + } else if ((reg + len) > TAS2781_YRAM1_START_REG) { + cd->offset = TAS2781_YRAM1_START_REG; + cd->len = + len - (TAS2781_YRAM1_START_REG - reg); + ret = 1; + } else + ret = 0; + } else if (page == TAS2781_YRAM3_PAGE) { + if (reg > TAS2781_YRAM3_END_REG) { + ret = 0; + } else if (reg >= TAS2781_YRAM3_START_REG) { + if ((reg + len) > TAS2781_YRAM3_END_REG) { + cd->offset = reg; + cd->len = + TAS2781_YRAM3_END_REG - reg + 1; + ret = 1; + } else { + cd->offset = reg; + cd->len = len; + ret = 1; + } + } else { + if ((reg + (len-1)) < + TAS2781_YRAM3_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM3_START_REG; + cd->len = + len - (TAS2781_YRAM3_START_REG - reg); + ret = 1; + } + } + } + } else if (book == + TAS2781_YRAM_BOOK2) { + if (page == TAS2781_YRAM5_PAGE) { + if (reg > TAS2781_YRAM5_END_REG) { + ret = 0; + } else if (reg >= TAS2781_YRAM5_START_REG) { + if ((reg + len) > TAS2781_YRAM5_END_REG) { + cd->offset = reg; + cd->len = + TAS2781_YRAM5_END_REG - reg + 1; + ret = 1; + } else { + cd->offset = reg; + cd->len = len; + ret = 1; + } + } else { + if ((reg + (len-1)) < + TAS2781_YRAM5_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM5_START_REG; + cd->len = + len - (TAS2781_YRAM5_START_REG - reg); + ret = 1; + } + } + } + } else + ret = 0; + + return ret; +} + +static int check_inblock_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + int ret = 0; + + if (book == TAS2781_YRAM_BOOK1) { + if (page < TAS2781_YRAM2_START_PAGE) + ret = 0; + else if (page <= TAS2781_YRAM2_END_PAGE) { + if (reg > TAS2781_YRAM2_END_REG) + ret = 0; + else if (reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + ret = 1; + } else { + if ((reg + (len-1)) < + TAS2781_YRAM2_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM2_START_REG; + cd->len = + reg + len - TAS2781_YRAM2_START_REG; + ret = 1; + } + } + } else + ret = 0; + } else if (book == + TAS2781_YRAM_BOOK2) { + if (page < TAS2781_YRAM4_START_PAGE) + ret = 0; + else if (page <= TAS2781_YRAM4_END_PAGE) { + if (reg > TAS2781_YRAM2_END_REG) + ret = 0; + else if (reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + ret = 1; + } else { + if ((reg + (len-1)) + < TAS2781_YRAM2_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM2_START_REG; + cd->len = + reg + len - TAS2781_YRAM2_START_REG; + ret = 1; + } + } + } else + ret = 0; + } else + ret = 0; + + return ret; +} + +static int check_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + int ret = 0; + + ret = check_inpage_yram(cd, book, page, reg, len); + if (ret == 0) + ret = check_inblock_yram(cd, book, + page, reg, len); + + return ret; +} + +static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, + enum channel chl, unsigned char book, unsigned char page, + unsigned char reg, unsigned char val) +{ + int ret = 0; + struct tas_crc crc_data; + unsigned int nData1 = 0; + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg >= TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (reg <= (TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG) + 4))) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + ret = check_yram(&crc_data, book, page, reg, 1); + if (ret == 1) { + ret = tasdevice_dev_read(tasdevice, chl, + TASDEVICE_REG(book, page, reg), &nData1); + if (ret < 0) + goto end; + + if (nData1 != val) { + dev_err(tasdevice->dev, + "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", + book, page, reg, + val, nData1); + ret = -EAGAIN; + tasdevice->tasdevice[chl].err_code |= + ERROR_YRAM_CRCCHK; + ret = -EAGAIN; + goto end; + } + + ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); + } + +end: + return ret; +} + +static int do_multireg_checksum(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned char book, unsigned char page, + unsigned char reg, unsigned int len) +{ + int ret = 0, i = 0; + unsigned char crc_chksum = 0; + unsigned char nBuf1[128] = {0}; + struct tas_crc crc_data; + + if ((reg + len-1) > 127) { + ret = -EINVAL; + dev_err(tasdevice->dev, "firmware error\n"); + goto end; + } + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg == TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (len == 4)) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + ret = check_yram(&crc_data, book, page, reg, len); + if (ret == 1) { + if (len == 1) { + dev_err(tasdevice->dev, "firmware error\n"); + ret = -EINVAL; + goto end; + } else { + ret = tasdevice_dev_bulk_read(tasdevice, chn, + TASDEVICE_REG(book, page, crc_data.offset), + nBuf1, crc_data.len); + if (ret < 0) + goto end; + + for (i = 0; i < crc_data.len; i++) { + if ((book == TASDEVICE_BOOK_ID( + TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID( + TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + >= TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + <= (TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG) + + 4))) { + /*DSP swap command, bypass */ + continue; + } else + crc_chksum += + crc8(tasdevice->crc8_lkp_tbl, + &nBuf1[i], 1, 0); + } + + ret = crc_chksum; + } + } + +end: + return ret; +} + +static int tasdevice_load_block(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block) +{ + int ret = 0; + unsigned int nr_cmds = 0; + unsigned char book = 0; + unsigned char page = 0; + unsigned char offset = 0; + unsigned char val = 0; + unsigned int len = 0; + unsigned int sleep_dur = 0; + unsigned char crc_chksum = 0; + unsigned int nr_value = 0; + int nr_retry = 6; + unsigned char *data = block->data; + int chn = 0, chnend = 0; + + switch (block->type) { + case MAIN_ALL_DEVICES: + chn = 0; + chnend = tas_dev->ndev; + break; + case MAIN_DEVICE_A: + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + chn = 0; + chnend = 1; + break; + case MAIN_DEVICE_B: + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + chn = 1; + chnend = 2; + break; + case MAIN_DEVICE_C: + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + chn = 2; + chnend = 3; + break; + case MAIN_DEVICE_D: + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + chn = 3; + chnend = 4; + break; + default: + dev_dbg(tas_dev->dev, "load block: Other Type = 0x%02x\n", + block->type); + break; + } + + for (; chn < chnend; chn++) { + if (tas_dev->tasdevice[chn].is_loading == false) + continue; +start: + if (block->is_pchksum_present) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_I2CChecksum, 0); + if (ret < 0) + goto end; + } + + if (block->is_ychksum_present) + crc_chksum = 0; + + nr_cmds = 0; + + while (nr_cmds < block->nr_cmds) { + data = block->data + nr_cmds * 4; + + book = data[0]; + page = data[1]; + offset = data[2]; + val = data[3]; + + nr_cmds++; + + if (offset <= 0x7F) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(book, page, offset), + val); + if (ret < 0) + goto end; + if (block->is_ychksum_present) { + ret = do_singlereg_checksum(tas_dev, + chn, book, page, offset, + val); + if (ret < 0) + goto check; + crc_chksum += (unsigned char)ret; + } + continue; + } + if (offset == 0x81) { + sleep_dur = (book << 8) + page; + msleep(sleep_dur); + continue; + } + if (offset == 0x85) { + data += 4; + len = (book << 8) + page; + book = data[0]; + page = data[1]; + offset = data[2]; + if (len > 1) { + ret = tasdevice_dev_bulk_write( + tas_dev, chn, + TASDEVICE_REG(book, page, + offset), data + 3, len); + if (ret < 0) + goto end; + if (!block->is_ychksum_present) + goto next; + ret = do_multireg_checksum( + tas_dev, chn, book, + page, offset, + len); + if (ret < 0) + goto check; + crc_chksum += + (unsigned char)ret; + } else { + ret = tasdevice_dev_write(tas_dev, + chn, + TASDEVICE_REG(book, page, + offset), + data[3]); + if (ret < 0) + goto end; + if (!block->is_ychksum_present) + goto next; + ret = do_singlereg_checksum( + tas_dev, chn, book, + page, offset, + data[3]); + if (ret < 0) + goto check; + crc_chksum += + (unsigned char)ret; + } +next: + nr_cmds++; + if (len >= 2) + nr_cmds += ((len - 2) / 4) + 1; + } + } + if (block->is_pchksum_present) { + ret = tasdevice_dev_read(tas_dev, chn, + TASDEVICE_I2CChecksum, &nr_value); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: Channel %d\n", + __func__, chn); + goto check; + } + if ((nr_value & 0xff) != block->pchksum) { + dev_err(tas_dev->dev, + "Block PChkSum Channel %d ", chn); + dev_err(tas_dev->dev, + "FW = 0x%x, Reg = 0x%x\n", + block->pchksum, + (nr_value & 0xff)); + ret = -EAGAIN; + tas_dev->tasdevice[chn].err_code |= + ERROR_PRAM_CRCCHK; + goto check; + } + ret = 0; + tas_dev->tasdevice[chn].err_code &= + ~ERROR_PRAM_CRCCHK; + } + + if (block->is_ychksum_present) { + //TBD, open it when FW ready + dev_err(tas_dev->dev, + "Block YChkSum: FW = 0x%x, YCRC = 0x%x\n", + block->ychksum, crc_chksum); + + tas_dev->tasdevice[chn].err_code &= + ~ERROR_YRAM_CRCCHK; + ret = 0; + } +check: + if (ret == -EAGAIN) { + nr_retry--; + if (nr_retry > 0) + goto start; + else { + if ((block->type == MAIN_ALL_DEVICES) + || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + nr_retry = 6; + } + } + } +end: + if (ret < 0) + dev_err(tas_dev->dev, "Block (%d) load error\n", block->type); + + return ret; +} + + +static int tasdevice_load_data(struct tasdevice_priv *tas_dev, + struct tasdevice_data *dev_data) +{ + int ret = 0; + unsigned int nr_block = 0; + struct tasdev_blk *block = NULL; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tas_dev->tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +static int tasdevice_load_calibrated_data( + struct tasdevice_priv *tas_dev, struct tasdevice_data *dev_data) +{ + int ret = 0; + unsigned int nr_block = 0; + struct tasdev_blk *block = NULL; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +int tas2781_load_calibration(void *context, + char *file_name, enum channel i) +{ + int ret = 0, offset = 0; + struct firmware fmw; + const struct firmware *fw_entry = NULL; + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + struct tasdevice *tasdev = &(tas_dev->tasdevice[i]); + struct tasdevice_fw *tas_fmw = NULL; + + ret = request_firmware(&fw_entry, file_name, tas_dev->dev); + if (!ret) { + if (!fw_entry->size) { + dev_err(tas_dev->dev, + "%s: file read error: size = %lu\n", + __func__, (unsigned long)fw_entry->size); + goto out; + } + fmw.size = fw_entry->size; + fmw.data = fw_entry->data; + } else { + dev_info(tas_dev->dev, + "%s: Request firmware %s failed\n", + __func__, file_name); + goto out; + } + + tas_fmw = tasdev->cali_data_fmw = kcalloc(1, + sizeof(struct tasdevice_fw), GFP_KERNEL); + if (tasdev->cali_data_fmw == NULL) { + dev_err(tas_dev->dev, "%s: FW memory failed!\n", __func__); + ret = -1; + goto out; + } + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, "%s: fw_parse_header EXIT!\n", __func__); + goto out; + } + offset = fw_parse_variable_hdr_cal(tas_dev, tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, + "%s: fw_parse_variable_header_cal EXIT!\n", __func__); + goto out; + } + offset = fw_parse_program_data(tas_dev, tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, "%s: fw_parse_program_data EXIT!\n", + __func__); + goto out; + } + offset = fw_parse_configuration_data(tas_dev, tas_fmw, &fmw, + offset); + if (offset == -1) { + dev_err(tas_dev->dev, + "%s: fw_parse_configuration_data EXIT!\n", __func__); + goto out; + } + offset = fw_parse_calibration_data(tas_dev, + tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, "%s: fw_parse_calibration_data EXIT!\n", + __func__); + goto out; + } + tasdev->is_calibrated_data_loaded = true; +out: + if (fw_entry) { + release_firmware(fw_entry); + fw_entry = NULL; + } + return ret; +} + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_fw *tas_fmw = NULL; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = NULL; + int offset = 0, ret = 0; + + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, "%s: Failed to read firmware %s\n", + __func__, tas_dev->coef_binaryname); + ret = -1; + goto out; + } + + tas_dev->fmw = kcalloc(1, + sizeof(struct tasdevice_fw), GFP_KERNEL); + if (tas_dev->fmw == NULL) { + ret = -1; + goto out; + } + tas_fmw = tas_dev->fmw; + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, fmw, offset); + + if (offset == -1) + goto out; + fw_fixed_hdr = &(tas_fmw->fw_hdr.fixed_hdr); + switch (fw_fixed_hdr->drv_ver) { + case 0x301: + case 0x302: + case 0x502: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + break; + case 0x202: + case 0x400: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + if (fw_fixed_hdr->drv_ver == 0x100) { + if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + tas_dev->fw_parse_calibration_data = NULL; + } else { + switch (fw_fixed_hdr->ppcver) { + case 0x00: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->fw_parse_calibration_data = + fw_parse_calibration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + dev_err(tas_dev->dev, + "%s: PPCVersion must be 0x0 or 0x%02x", + __func__, PPC3_VERSION); + dev_err(tas_dev->dev, " Current:0x%02x\n", + fw_fixed_hdr->ppcver); + offset = -1; + break; + } + } + } else { + dev_err(tas_dev->dev, + "%s: DriverVersion must be 0x0, 0x230 or above 0x230 ", + __func__); + dev_err(tas_dev->dev, "current is 0x%02x\n", + fw_fixed_hdr->drv_ver); + offset = -1; + } + break; + } + + offset = tas_dev->fw_parse_variable_header(tas_dev, fmw, offset); + if (offset == -1) + goto out; + + offset = tas_dev->fw_parse_program_data(tas_dev, tas_fmw, fmw, + offset); + if (offset < 0) { + ret = -1; + goto out; + } + offset = tas_dev->fw_parse_configuration_data(tas_dev, + tas_fmw, fmw, offset); + if (offset < 0) + ret = -1; + +out: + return ret; +} + +void tasdevice_calbin_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice *tasdev = NULL; + int i = 0; + + if (tas_dev) { + for (i = 0; i < tas_dev->ndev; i++) { + tasdev = &(tas_dev->tasdevice[i]); + if (tasdev->cali_data_fmw) { + tas2781_clear_calfirmware( + tasdev->cali_data_fmw); + tasdev->cali_data_fmw = NULL; + } + } + } +} + +void tasdevice_dsp_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + int i; + struct tasdev_blk *blk; + unsigned int nr_blk; + + if (tas_dev->fmw) { + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + + if (tas_fmw->programs) { + struct tasdevice_prog *program; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + program = &(tas_fmw->programs[i]); + if (program) { + struct tasdevice_data + *im = &(program->dev_data); + + if (!im->dev_blks) + continue; + + for (nr_blk = 0; nr_blk < im->nr_blk; + nr_blk++) { + blk = + &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); + } + } + kfree(tas_fmw->programs); + } + + if (tas_fmw->configs) { + struct tasdevice_config *config; + + for (i = 0; i < tas_fmw->nr_configurations; i++) { + config = &(tas_fmw->configs[i]); + if (config) { + struct tasdevice_data + *im = &(config->dev_data); + + if (!im->dev_blks) + continue; + for (nr_blk = 0; nr_blk < im->nr_blk; + nr_blk++) { + blk = + &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); + } + } + kfree(tas_fmw->configs); + } + kfree(tas_fmw); + tas_dev->fmw = NULL; + } +} + +static int tas2781_set_calibration(void *context, enum channel i, + int n_calibration) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + int ret = 0; + struct tasdevice *tasdevice = &(tas_dev->tasdevice[i]); + struct tasdevice_fw *cal_fmw = tasdevice->cali_data_fmw; + + if ((!tas_dev->fmw->programs) + || (!tas_dev->fmw->configs)) { + dev_err(tas_dev->dev, "%s, Firmware not loaded\n\r", __func__); + ret = 0; + goto out; + } + + if (n_calibration == 0xFF || (n_calibration == 0x100 + && tasdevice->is_calibrated_data_loaded == false)) { + if (cal_fmw) { + tasdevice->is_calibrated_data_loaded = false; + tas2781_clear_calfirmware(cal_fmw); + cal_fmw = NULL; + } + + scnprintf(tas_dev->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", + tas_dev->dev_name, tas_dev->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_dev, + tas_dev->cal_binaryname[i], i); + if (ret != 0) { + dev_err(tas_dev->dev, + "%s: load %s error, no-side effect\n", + __func__, tas_dev->cal_binaryname[i]); + ret = 0; + } + } + tasdevice->is_loading = true; + tasdevice->is_loaderr = false; + + if (cal_fmw) { + struct tasdevice_calibration *calibration = + cal_fmw->calibrations; + + if (calibration) + tasdevice_load_calibrated_data(tas_dev, + &(calibration->dev_data)); + } else + dev_err(tas_dev->dev, + "%s: No calibrated data for device %d\n", __func__, i); + +out: + return ret; +} + +int tasdevice_select_tuningprm_cfg(void *context, int prm_no, + int cfg_no, int rca_conf_no) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_config *conf = NULL; + struct tasdevice_prog *program = NULL; + int i = 0; + int status = 0; + int prog_status = 0; + + if (tas_fmw == NULL) { + dev_err(tas_dev->dev, "%s: Firmware is NULL\n", __func__); + goto out; + } + + if (cfg_no >= tas_fmw->nr_configurations) { + dev_err(tas_dev->dev, + "%s: cfg(%d) is not in range of conf %u\n", + __func__, cfg_no, tas_fmw->nr_configurations); + goto out; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_dev->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + goto out; + } + + if (rca_conf_no > rca->ncfgs || rca_conf_no <= 0 || + cfg_info == NULL) { + dev_err(tas_dev->dev, + "conf_no:%d should be in range from 0 to %u\n", + rca_conf_no, rca->ncfgs-1); + goto out; + } + + conf = &(tas_fmw->configs[cfg_no]); + for (i = 0; i < tas_dev->ndev; i++) { + if (cfg_info[rca_conf_no]->active_dev & (1 << i)) { + if (tas_dev->tasdevice[i].cur_prog != prm_no) { + tas_dev->tasdevice[i].cur_conf = -1; + tas_dev->tasdevice[i].is_loading = true; + prog_status++; + } + } else + tas_dev->tasdevice[i].is_loading = false; + tas_dev->tasdevice[i].is_loaderr = false; + } + + if (prog_status) { + program = &(tas_fmw->programs[prm_no]); + tasdevice_load_data(tas_dev, &(program->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) + continue; + else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) { + struct tasdevice_fw *cal_fmw = + tas_dev->tasdevice[i].cali_data_fmw; + + if (cal_fmw) { + struct tasdevice_calibration + *calibration = + cal_fmw->calibrations; + + if (calibration) + tasdevice_load_calibrated_data( + tas_dev, + &(calibration->dev_data)); + } + tas_dev->tasdevice[i].cur_prog = prm_no; + } + } + } + + if (tas_dev->is_glb_calibrated_data_loaded == false) { + for (i = 0; i < tas_dev->ndev; i++) + tas2781_set_calibration(tas_dev, i, 0x100); + tas_dev->is_glb_calibrated_data_loaded = true; + /* No wise to reload calibrationdata everytime, + * this code will work once even if calibrated + * data still failed to be got + */ + } + + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].cur_conf != cfg_no + && (cfg_info[rca_conf_no]->active_dev & (1 << i)) + && (tas_dev->tasdevice[i].is_loaderr == false)) { + status++; + tas_dev->tasdevice[i].is_loading = true; + } else + tas_dev->tasdevice[i].is_loading = false; + } + + if (status) { + status = 0; + tasdevice_load_data(tas_dev, &(conf->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) { + status |= 1 << (i + 4); + continue; + } else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) + tas_dev->tasdevice[i].cur_conf = cfg_no; + } + } else + dev_err(tas_dev->dev, + "%s: No device is in active in conf %d\n", + __func__, rca_conf_no); + + status |= cfg_info[rca_conf_no]->active_dev; +out: + return prog_status; +} diff --git a/sound/soc/codecs/tas2781-dsp.h b/sound/soc/codecs/tas2781-dsp.h new file mode 100644 index 000000000000..26a6f5796349 --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.h @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TASDEVICE_DSP_H__ +#define __TASDEVICE_DSP_H__ + +#define MAIN_ALL_DEVICES 0x0d +#define MAIN_DEVICE_A 0x01 +#define MAIN_DEVICE_B 0x08 +#define MAIN_DEVICE_C 0x10 +#define MAIN_DEVICE_D 0x14 +#define COEFF_DEVICE_A 0x03 +#define COEFF_DEVICE_B 0x0a +#define COEFF_DEVICE_C 0x11 +#define COEFF_DEVICE_D 0x15 +#define PRE_DEVICE_A 0x04 +#define PRE_DEVICE_B 0x0b +#define PRE_DEVICE_C 0x12 +#define PRE_DEVICE_D 0x16 + +#define PPC3_VERSION 0x4100 +#define RCA_CONFIGID_BYPASS_ALL 0 +#define TASDEVICE_DEVICE_SUM 8 +#define TASDEVICE_CONFIG_SUM 64 + +enum channel { + top_left_Chn, + top_right_chn, + bottom_left_Chn, + bottom_right_chn, + max_chn, +}; + +enum tasdevice_dsp_dev_idx { + TASDEVICE_DSP_TAS_2555 = 0, + TASDEVICE_DSP_TAS_2555_STEREO, + TASDEVICE_DSP_TAS_2557_MONO, + TASDEVICE_DSP_TAS_2557_DUAL_MONO, + TASDEVICE_DSP_TAS_2559, + TASDEVICE_DSP_TAS_2563, + TASDEVICE_DSP_TAS_2563_DUAL_MONO = 7, + TASDEVICE_DSP_TAS_2563_QUAD, + TASDEVICE_DSP_TAS_2563_21, + TASDEVICE_DSP_TAS_2781, + TASDEVICE_DSP_TAS_2781_DUAL_MONO, + TASDEVICE_DSP_TAS_2781_21, + TASDEVICE_DSP_TAS_2781_QUAD, + TASDEVICE_DSP_TAS_MAX_DEVICE +}; + +struct tasdevice_fw_fixed_hdr { + unsigned int fwsize; + unsigned int ppcver; + unsigned int drv_ver; +}; + +struct tasdevice_dspfw_hdr { + struct tasdevice_fw_fixed_hdr fixed_hdr; + unsigned short device_family; + unsigned short device; + unsigned char ndev; +}; + +struct tasdev_blk { + unsigned int type; + unsigned char is_pchksum_present; + unsigned char pchksum; + unsigned char is_ychksum_present; + unsigned char ychksum; + unsigned int nr_cmds; + unsigned int blk_size; + unsigned int nr_subblocks; + unsigned char *data; +}; + +struct tasdevice_data { + char name[64]; + unsigned int nr_blk; + struct tasdev_blk *dev_blks; +}; +struct tasdevice_prog { + unsigned int prog_size; + struct tasdevice_data dev_data; +}; + +struct tasdevice_config { + unsigned int cfg_size; + char name[64]; + struct tasdevice_data dev_data; +}; + +struct tasdevice_calibration { + struct tasdevice_data dev_data; +}; + +struct tasdevice_fw { + struct tasdevice_dspfw_hdr fw_hdr; + unsigned short nr_programs; + struct tasdevice_prog *programs; + unsigned short nr_configurations; + struct tasdevice_config *configs; + unsigned short nr_calibrations; + struct tasdevice_calibration *calibrations; + struct device *dev; +}; + +enum tasdevice_dsp_fw_state { + TASDEVICE_DSP_FW_NONE = 0, + TASDEVICE_DSP_FW_PENDING, + TASDEVICE_DSP_FW_FAIL, + TASDEVICE_DSP_FW_ALL_OK, +}; + +enum tasdevice_bin_blk_type { + TASDEVICE_BIN_BLK_COEFF = 1, + TASDEVICE_BIN_BLK_POST_POWER_UP, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN, + TASDEVICE_BIN_BLK_PRE_POWER_UP, + TASDEVICE_BIN_BLK_POST_SHUTDOWN +}; + +struct tasdevice_rca_hdr { + unsigned int img_sz; + unsigned int checksum; + unsigned int binary_version_num; + unsigned int drv_fw_version; + unsigned char plat_type; + unsigned char dev_family; + unsigned char reserve; + unsigned char ndev; + unsigned char devs[TASDEVICE_DEVICE_SUM]; + unsigned int nconfig; + unsigned int config_size[TASDEVICE_CONFIG_SUM]; +}; + +struct tasdev_blk_data { + unsigned char dev_idx; + unsigned char block_type; + unsigned short yram_checksum; + unsigned int block_size; + unsigned int n_subblks; + unsigned char *regdata; +}; + +struct tasdevice_config_info { + unsigned int nblocks; + unsigned int real_nblocks; + unsigned char active_dev; + struct tasdev_blk_data **blk_data; +}; + +struct tasdevice_rca { + struct tasdevice_rca_hdr fw_hdr; + int ncfgs; + struct tasdevice_config_info **cfg_info; + int profile_cfg_id; +}; + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context); +void tasdevice_dsp_remove(void *context); +void tasdevice_calbin_remove(void *context); +int tas2781_load_calibration(void *tas_dev, char *filename, + enum channel i); +int tasdevice_select_tuningprm_cfg(void *context, int prm, + int cfg_no, int rca_conf_no); + +#endif diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c new file mode 100644 index 000000000000..c5f1c8202d22 --- /dev/null +++ b/sound/soc/codecs/tas2781-i2c.c @@ -0,0 +1,1655 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/init.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/of_gpio.h> +#include <linux/interrupt.h> +#include <sound/soc.h> +#include <sound/pcm_params.h> +#include <sound/tlv.h> +#include <linux/crc8.h> + +#include "tas2781.h" + +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d + +const char *blocktype[5] = { + "COEFF", + "POST_POWER_UP", + "PRE_SHUTDOWN", + "PRE_POWER_UP", + "POST_SHUTDOWN" +}; + +static const char * const dts_dev_addr_tag[] = { + "topleft-channel", + "topright-channel", + "bottomleft-channel", + "bottomright-channel" +}; + +static const struct i2c_device_id tasdevice_id[] = { + { "tas2781", TAS2781 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tasdevice_id); + +static const struct regmap_range_cfg tasdevice_ranges[] = { + { + .range_min = 0, + .range_max = 256 * 128, + .selector_reg = TASDEVICE_PAGE_SELECT, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 128, + }, +}; + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 16, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .ranges = tasdevice_ranges, + .num_ranges = ARRAY_SIZE(tasdevice_ranges), + .max_register = 256 * 128, +}; + +static const struct of_device_id tasdevice_of_match[] = { + { .compatible = "ti,tas2781" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, tasdevice_of_match); + +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *)context; + unsigned char subblk_typ = data[1]; + int subblk_offset = 2; + int chn = 0, chnend = 0; + int rc = 0; + int blktyp = dev_idx & 0xC0, idx = dev_idx & 0x3F; + bool is_err = false; + + if (idx) { + chn = idx-1; + chnend = idx; + } else { + if (tas_dev->set_global_mode) { + chn = tas_dev->ndev; + chnend = tas_dev->ndev + 1; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + } + + for (; chn < chnend; chn++) { + if (tas_dev->set_global_mode == NULL && + tas_dev->tasdevice[chn].is_loading == false) + continue; + + is_err = false; + subblk_offset = 2; + switch (subblk_typ) { + case TASDEVICE_CMD_SING_W: { + int i = 0; + unsigned short len = SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 * len > sublocksize) { + dev_err(tas_dev->dev, + "process_block: Out of bounary\n"); + is_err = true; + break; + } + + for (i = 0; i < len; i++) { + rc = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + data[subblk_offset + 3]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "process_block: single write error\n"); + } + subblk_offset += 4; + } + } + break; + case TASDEVICE_CMD_BURST: { + unsigned short len = + SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 + len > sublocksize) { + dev_err(tas_dev->dev, + "%s: BST Out of bounary\n", __func__); + is_err = true; + break; + } + if (len % 4) { + dev_err(tas_dev->dev, + "%s:Bst-len(%u)not div by 4\n", + __func__, len); + break; + } + + rc = tasdevice_dev_bulk_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + &(data[subblk_offset + 4]), + len); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: bulk_write error = %d\n", + __func__, rc); + } + subblk_offset += (len + 4); + } + break; + case TASDEVICE_CMD_DELAY: { + unsigned short delay_time = 0; + + if (subblk_offset + 2 > sublocksize) { + dev_err(tas_dev->dev, + "%s: deley Out of bounary\n", + __func__); + is_err = true; + break; + } + delay_time = SMS_HTONS(data[2], data[3]); + usleep_range(delay_time*1000, delay_time*1000); + subblk_offset += 2; + } + break; + case TASDEVICE_CMD_FIELD_W: + if (subblk_offset + 6 > sublocksize) { + dev_err(tas_dev->dev, + "%s: bit write Out of bounary\n", + __func__); + is_err = true; + break; + } + rc = tasdevice_dev_update_bits(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset + 2], + data[subblk_offset + 3], + data[subblk_offset + 4]), + data[subblk_offset + 1], + data[subblk_offset + 5]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: update_bits error = %d\n", + __func__, rc); + } + subblk_offset += 6; + break; + default: + break; + }; + if (is_err == true && blktyp != 0) { + if (blktyp == 0x80) { + tas_dev->tasdevice[chn].cur_prog = -1; + tas_dev->tasdevice[chn].cur_conf = -1; + } else + tas_dev->tasdevice[chn].cur_conf = -1; + } + } + return subblk_offset; +} + +static void tasdevice_select_cfg_blk(void *pContext, int conf_no, + unsigned char block_type) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) pContext; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + int j = 0, k = 0, chn = 0, chnend = 0; + + if (conf_no >= rca->ncfgs || conf_no < 0 || NULL == cfg_info) { + dev_err(tas_dev->dev, + "conf_no should be not more than %u\n", + rca->ncfgs); + goto out; + } + + for (j = 0; j < (int)cfg_info[conf_no]->real_nblocks; j++) { + unsigned int length = 0, rc = 0; + + if (block_type > 5 || block_type < 2) { + dev_err(tas_dev->dev, + "ERROR!!!block_type should be in range from 2 to 5\n"); + goto out; + } + if (block_type != cfg_info[conf_no]->blk_data[j]->block_type) + continue; + + for (k = 0; k < (int)cfg_info[conf_no]->blk_data[j] + ->n_subblks; k++) { + if (cfg_info[conf_no]->blk_data[j]->dev_idx) { + chn = + cfg_info[conf_no]->blk_data[j]->dev_idx + - 1; + chnend = + cfg_info[conf_no]->blk_data[j]->dev_idx; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + for (; chn < chnend; chn++) + tas_dev->tasdevice[chn].is_loading = true; + + rc = tasdevice_process_block(tas_dev, + cfg_info[conf_no]->blk_data[j]->regdata + + length, + cfg_info[conf_no]->blk_data[j]->dev_idx, + cfg_info[conf_no]->blk_data[j]->block_size - + length); + length += rc; + if (cfg_info[conf_no]->blk_data[j]->block_size < + length) { + dev_err(tas_dev->dev, + "%s: ERROR:%u %u out of bounary\n", + __func__, length, + cfg_info[conf_no]->blk_data[j] + ->block_size); + break; + } + } + if (length != cfg_info[conf_no]->blk_data[j]->block_size) + dev_err(tas_dev->dev, + "%s: %u %u size is not same\n", + __func__, length, + cfg_info[conf_no]->blk_data[j]->block_size); + + } + +out: + return; +} + +static struct tasdevice_config_info *tasdevice_add_config( + void *context, unsigned char *config_data, + unsigned int config_size) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *)context; + struct tasdevice_config_info *cfg_info = NULL; + int config_offset = 0, i = 0; + + cfg_info = kzalloc( + sizeof(struct tasdevice_config_info), GFP_KERNEL); + if (!cfg_info) + goto out; + + if (tas_dev->rcabin.fw_hdr.binary_version_num >= 0x105) { + if (config_offset + 64 > (int)config_size) { + dev_err(tas_dev->dev, + "add config: Out of bounary\n"); + goto out; + } + config_offset += 64; + } + + if (config_offset + 4 > (int)config_size) { + dev_err(tas_dev->dev, + "add config: Out of bounary\n"); + goto out; + } + cfg_info->nblocks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data = kcalloc( + cfg_info->nblocks, sizeof(struct tasdev_blk_data *), + GFP_KERNEL); + if (!cfg_info->blk_data) + goto out; + + cfg_info->real_nblocks = 0; + for (i = 0; i < (int)cfg_info->nblocks; i++) { + if (config_offset + 12 > config_size) { + dev_err(tas_dev->dev, + "add config: Out of bounary: i = %d nblocks = %u!\n", + i, cfg_info->nblocks); + break; + } + cfg_info->blk_data[i] = kzalloc( + sizeof(struct tasdev_blk_data), GFP_KERNEL); + if (!cfg_info->blk_data[i]) + break; + + cfg_info->blk_data[i]->dev_idx = config_data[config_offset]; + config_offset++; + + cfg_info->blk_data[i]->block_type = config_data[config_offset]; + config_offset++; + + if (cfg_info->blk_data[i]->block_type == + TASDEVICE_BIN_BLK_PRE_POWER_UP) { + if (cfg_info->blk_data[i]->dev_idx == 0) { + cfg_info->active_dev = 1; + } else { + cfg_info->active_dev = + 1 << + (cfg_info->blk_data[i]->dev_idx - 1); + } + } + cfg_info->blk_data[i]->yram_checksum = + SMS_HTONS(config_data[config_offset], + config_data[config_offset + 1]); + config_offset += 2; + cfg_info->blk_data[i]->block_size = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data[i]->n_subblks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + + config_offset += 4; + cfg_info->blk_data[i]->regdata = kzalloc( + cfg_info->blk_data[i]->block_size, GFP_KERNEL); + if (cfg_info->blk_data[i]->regdata == 0) + goto out; + + if (config_offset + cfg_info->blk_data[i]->block_size + > config_size) { + dev_err(tas_dev->dev, + "%s: block_size Out of bounary: i = %d blks = %u!\n", + __func__, i, cfg_info->nblocks); + break; + } + memcpy(cfg_info->blk_data[i]->regdata, + &config_data[config_offset], + cfg_info->blk_data[i]->block_size); + config_offset += cfg_info->blk_data[i]->block_size; + cfg_info->real_nblocks += 1; + } +out: + return cfg_info; +} + +// tas2781 contain book and page two-level regmap, especially book switching +// will set two registers, one is BXXPXXR00, the other is B0P0R7F, after +// switching to the correct book, then leverage the mechanism for paging to +// access the register. Custom control is primarily for regmap booking, +// paging depends on internal regmap mechanism +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned int invert = mc->invert; + int max = mc->max; + int ret = 0; + + /* Read the primary device as the whole */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, + "%s, get digital vol error\n", + __func__); + goto out; + } + + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned int invert = mc->invert; + int max = mc->max; + int i, ret = 0; + + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + + if (tas_dev->set_global_mode != NULL) { + ret = tasdevice_dev_write(tas_dev, tas_dev->ndev, + mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_dev->dev, + "%s, set digital vol error in global mode\n", + __func__); + } else { + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, + mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_dev->dev, + "%s, set digital vol error in device %d\n", + __func__, i); + } + } + + return 1; +} + +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned char mask = 0; + int max = mc->max; + int ret = 0; + unsigned int invert = mc->invert; + + /* Read the primary device */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, + "%s, get AMP vol error\n", + __func__); + goto out; + } + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + int i, ret = 0; + unsigned char mask = 0; + int max = mc->max; + unsigned int invert = mc->invert; + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + mc->reg, mask, (unsigned int)(val << mc->shift)); + if (ret) + dev_err(tas_dev->dev, + "%s, set AMP vol error in device %d\n", + __func__, i); + } + + return 1; +} + +static const DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); +static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); + +static const struct snd_kcontrol_new tas2781_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), +}; + +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + + tas_dev->rcabin.profile_cfg_id = + ucontrol->value.integer.value[0]; + + return 1; +} + +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_programs; + + return 0; +} + +static int tasdevice_info_configurations( + struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_configurations - 1; + + + return 0; +} + +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + + uinfo->count = 1; + uinfo->value.integer.min = 1; + uinfo->value.integer.max = max(0, tas_dev->rcabin.ncfgs); + + return 0; +} + +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev + = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = + tas_dev->rcabin.profile_cfg_id; + + return 0; +} + +static int tasdevice_create_controls(struct tasdevice_priv *tas_dev) +{ + int nr_controls = 1, ret = 0, mix_index = 0; + char *name = NULL; + struct snd_kcontrol_new *tasdevice_profile_controls = NULL; + + tasdevice_profile_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_profile_controls[0]), + GFP_KERNEL); + if (tasdevice_profile_controls == NULL) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!name) { + ret = -ENOMEM; + goto out; + } + scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "TASDEVICE Profile id"); + tasdevice_profile_controls[mix_index].name = name; + tasdevice_profile_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_profile_controls[mix_index].info = + tasdevice_info_profile; + tasdevice_profile_controls[mix_index].get = + tasdevice_get_profile_id; + tasdevice_profile_controls[mix_index].put = + tasdevice_set_profile_id; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_profile_controls, + nr_controls < mix_index ? nr_controls : mix_index); + + tas_dev->tas_ctrl.nr_controls = + nr_controls < mix_index ? nr_controls : mix_index; +out: + return ret; +} + +static int tasdevice_program_get(struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *pTAS2781 = snd_soc_component_get_drvdata(codec); + + pValue->value.integer.value[0] = pTAS2781->cur_prog; + + return 0; +} + +static int tasdevice_program_put(struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *pTAS2781 = snd_soc_component_get_drvdata(codec); + unsigned int nProgram = pValue->value.integer.value[0]; + + pTAS2781->cur_prog = nProgram; + + return 1; +} + +static int tasdevice_configuration_get( + struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *pTAS2781 = snd_soc_component_get_drvdata(codec); + + pValue->value.integer.value[0] = pTAS2781->cur_conf; + + return 0; +} + +static int tasdevice_configuration_put( + struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int n_configuration = pValue->value.integer.value[0]; + + tas_dev->cur_conf = n_configuration; + + return 1; +} + +static int tasdevice_dsp_create_control( + struct tasdevice_priv *tas_dev) +{ + int nr_controls = 2, ret = 0, mix_index = 0; + char *program_name = NULL; + char *configuration_name = NULL; + struct snd_kcontrol_new *tasdevice_dsp_controls = NULL; + + tasdevice_dsp_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_dsp_controls[0]), + GFP_KERNEL); + if (tasdevice_dsp_controls == NULL) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + program_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + configuration_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!program_name || !configuration_name) { + ret = -ENOMEM; + goto out; + } + + scnprintf(program_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "Program"); + tasdevice_dsp_controls[mix_index].name = program_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_programs; + tasdevice_dsp_controls[mix_index].get = + tasdevice_program_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_program_put; + mix_index++; + + scnprintf(configuration_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "Configuration"); + tasdevice_dsp_controls[mix_index].name = configuration_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_configurations; + tasdevice_dsp_controls[mix_index].get = + tasdevice_configuration_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_configuration_put; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_dsp_controls, + nr_controls < mix_index ? nr_controls : mix_index); + + tas_dev->tas_ctrl.nr_controls += nr_controls; +out: + return ret; +} + +static void tasdevice_rca_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = NULL; + struct tasdevice_rca_hdr *fw_hdr = NULL; + struct tasdevice_config_info **cfg_info = NULL; + const struct firmware *fw_entry = NULL; + unsigned char *buf = NULL; + int offset = 0, i = 0; + unsigned int total_config_sz = 0; + int ret = 0; + + mutex_lock(&tas_dev->codec_lock); + rca = &(tas_dev->rcabin); + fw_hdr = &(rca->fw_hdr); + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, + "Failed to read %s, no side - effect on driver running\n", + tas_dev->rca_binaryname); + ret = -1; + goto out; + } + buf = (unsigned char *)fmw->data; + + fw_hdr->img_sz = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + if (fw_hdr->img_sz != fmw->size) { + dev_err(tas_dev->dev, + "File size not match, %d %u", (int)fmw->size, + fw_hdr->img_sz); + ret = -1; + goto out; + } + + fw_hdr->checksum = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + fw_hdr->binary_version_num = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + if (fw_hdr->binary_version_num < 0x103) { + dev_err(tas_dev->dev, + "File version 0x%04x is too low", + fw_hdr->binary_version_num); + ret = -1; + goto out; + } + offset += 4; + fw_hdr->drv_fw_version = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 8; + fw_hdr->plat_type = buf[offset]; + offset += 1; + fw_hdr->dev_family = buf[offset]; + offset += 1; + fw_hdr->reserve = buf[offset]; + offset += 1; + fw_hdr->ndev = buf[offset]; + offset += 1; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "ndev(%u) from rcabin and ndev(%u) from DTS does not match\n", + fw_hdr->ndev, + tas_dev->ndev); + ret = -1; + goto out; + } + if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { + dev_err(tas_dev->dev, + "rca_ready: Out of bounary!\n"); + ret = -1; + goto out; + } + + for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) + fw_hdr->devs[i] = buf[offset]; + + fw_hdr->nconfig = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { + fw_hdr->config_size[i] = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + total_config_sz += fw_hdr->config_size[i]; + } + + if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { + dev_err(tas_dev->dev, "Bin file error!\n"); + ret = -1; + goto out; + } + cfg_info = kcalloc(fw_hdr->nconfig, + sizeof(struct tasdevice_config_info *), + GFP_KERNEL); + + if (!cfg_info) { + ret = -1; + goto out; + } + rca->cfg_info = cfg_info; + rca->ncfgs = 0; + for (i = 0; i < (int)fw_hdr->nconfig; i++) { + cfg_info[i] = tasdevice_add_config(context, &buf[offset], + fw_hdr->config_size[i]); + if (!cfg_info[i]) { + ret = -1; + break; + } + offset += (int)fw_hdr->config_size[i]; + rca->ncfgs += 1; + } + tasdevice_create_controls(tas_dev); + + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; + scnprintf(tas_dev->coef_binaryname, 64, "%s_coef.bin", + tas_dev->dev_name); + ret = request_firmware(&fw_entry, tas_dev->coef_binaryname, + tas_dev->dev); + if (!ret) { + ret = tasdevice_dspfw_ready(fw_entry, tas_dev); + release_firmware(fw_entry); + fw_entry = NULL; + } else { + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + dev_err(tas_dev->dev, "%s: load %s error\n", __func__, + tas_dev->coef_binaryname); + goto out; + } + tasdevice_dsp_create_control(tas_dev); + + tas_dev->fw_state = TASDEVICE_DSP_FW_ALL_OK; + tas_dev->is_glb_calibrated_data_loaded = true; + for (i = 0; i < tas_dev->ndev; i++) { + scnprintf(tas_dev->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", + tas_dev->dev_name, tas_dev->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_dev, + tas_dev->cal_binaryname[i], i); + if (ret != 0) { + dev_err(tas_dev->dev, + "%s: load %s error, no-side effect\n", + __func__, + tas_dev->cal_binaryname[i]); + ret = 0; + tas_dev->is_glb_calibrated_data_loaded = false; + } + } + +out: + mutex_unlock(&tas_dev->codec_lock); + if (fmw) + release_firmware(fmw); +} + +static void tasdevice_config_info_remove(void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + int i = 0, j = 0; + + mutex_lock(&tas_dev->dev_lock); + if (cfg_info) { + for (i = 0; i < rca->ncfgs; i++) { + if (cfg_info[i]) { + for (j = 0; j < (int)cfg_info[i]->real_nblocks; + j++) { + kfree( + cfg_info[i]->blk_data[j]->regdata); + kfree(cfg_info[i]->blk_data[j]); + } + kfree(cfg_info[i]->blk_data); + kfree(cfg_info[i]); + } + } + kfree(cfg_info); + } + mutex_unlock(&tas_dev->dev_lock); +} + +static void tasdevice_tuning_switch( + struct tasdevice_priv *tas_dev, int state) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + int profile_cfg_id = 0; + int is_set_glb_mode = 0; + + if (state == 0) { + if (tas_fmw) { + if (tas_dev->cur_prog >= tas_fmw->nr_programs) + /*bypass all in rca is profile id 0*/ + profile_cfg_id = RCA_CONFIGID_BYPASS_ALL; + else { + /*dsp mode or tuning mode*/ + profile_cfg_id = + tas_dev->rcabin.profile_cfg_id; + + is_set_glb_mode = + tasdevice_select_tuningprm_cfg(tas_dev, + tas_dev->cur_prog, + tas_dev->cur_conf, + profile_cfg_id); + if (tas_dev->set_global_mode != NULL) + tas_dev->set_global_mode(tas_dev); + } + } else + profile_cfg_id = RCA_CONFIGID_BYPASS_ALL; + + tasdevice_select_cfg_blk(tas_dev, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + } else + tasdevice_select_cfg_blk(tas_dev, + tas_dev->rcabin.profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN); +} + +static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *codec = snd_soc_dapm_to_component(w->dapm); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int state = 1; + + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + if (event == SND_SOC_DAPM_PRE_PMD) + state = 0; + tasdevice_tuning_switch(tas_dev, state); + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + return 0; +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT_E("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0, tasdevice_dapm_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_SPK("SPK", tasdevice_dapm_event), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC") +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"SPK", NULL, "ASI"}, + {"OUT", NULL, "SPK"}, + {"ASI OUT", NULL, "DMIC"} +}; + +static int tasdevice_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *codec = dai->component; + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int ret = 0; + + if (tas_dev->fw_state != TASDEVICE_DSP_FW_ALL_OK) { + dev_err(tas_dev->dev, "DSP bin file not loaded\n"); + ret = -EINVAL; + } + return ret; +} + +static int tasdevice_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(dai); + unsigned int fsrate; + unsigned int slot_width; + int bclk_rate; + int rc = 0; + + fsrate = params_rate(params); + switch (fsrate) { + case 48000: + break; + case 44100: + break; + default: + dev_err(tas_dev->dev, + "%s: incorrect sample rate = %u\n", + __func__, fsrate); + rc = -EINVAL; + goto out; + } + + slot_width = params_width(params); + switch (slot_width) { + case 16: + break; + case 20: + break; + case 24: + break; + case 32: + break; + default: + dev_err(tas_dev->dev, + "%s: incorrect slot width = %u\n", + __func__, slot_width); + rc = -EINVAL; + goto out; + } + + bclk_rate = snd_soc_params_to_bclk(params); + if (bclk_rate < 0) { + dev_err(tas_dev->dev, + "%s: incorrect bclk rate = %d\n", + __func__, bclk_rate); + rc = bclk_rate; + goto out; + } +out: + return rc; +} + +static int tasdevice_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(codec_dai); + + tas_dev->sysclk = freq; + + return 0; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .startup = tasdevice_startup, + .hw_params = tasdevice_hw_params, + .set_sysclk = tasdevice_set_dai_sysclk, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2781_codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static void tas2781_reset(struct tasdevice_priv *tas_dev) +{ + int ret = 0; + int i = 0; + + for (; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, + TAS2871_REG_SWRESET, + TAS2871_REG_SWRESET_RESET); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: chn %d reset fail, %d\n", + __func__, i, ret); + continue; + } + } + usleep_range(1000, 1050); +} + +static int tasdevice_codec_probe( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + int ret; + + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + + crc8_populate_msb(tas_dev->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); + tas_dev->codec = codec; + scnprintf(tas_dev->rca_binaryname, 64, "%s_rca.bin", + tas_dev->dev_name); + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL, tas_dev, + tasdevice_rca_ready); + if (ret) + dev_err(tas_dev->dev, + "%s: request_firmware_nowait error:0x%08x\n", + __func__, ret); + + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + if (gpio_is_valid(tas_dev->rst_gpio)) + gpio_direction_output(tas_dev->rst_gpio, 0); + + tas2781_reset(tas_dev); + if (tas_dev->set_global_mode != NULL) + tas_dev->set_global_mode(tas_dev); + + return ret; +} + +static void tasdevice_deinit(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + + tasdevice_config_info_remove(tas_dev); + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; +} + +static void tasdevice_codec_remove( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + tasdevice_deinit(tas_dev); + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_codec_probe, + .remove = tasdevice_codec_remove, + .controls = tas2781_snd_controls, + .num_controls = ARRAY_SIZE(tas2781_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_parse_dt(struct tasdevice_priv *tas_dev) +{ + struct device_node *np = tas_dev->dev->of_node; + int rc = 0, i = 0, ndev = 0; + unsigned int dev_addrs[max_chn]; + struct i2c_client *client = (struct i2c_client *)tas_dev->client; + + ndev = of_property_read_variable_u32_array(np, "ti,audio-slots", + dev_addrs, 0, ARRAY_SIZE(dev_addrs)); + if (ndev <= 0) { + ndev = 1; + dev_addrs[0] = client->addr; + } + + for (i = 0; i < ndev; i++) + tas_dev->tasdevice[i].dev_addr = dev_addrs[i]; + + if (ndev > 1) { + rc = of_property_read_u32(np, "ti,broadcast-addr", + &(tas_dev->glb_addr.dev_addr)); + if (rc) { + dev_err(tas_dev->dev, + "Looking up node %s failed %d\n", + np->full_name, rc); + tas_dev->glb_addr.dev_addr = 0; + } + } + + tas_dev->ndev = ndev; + + tas_dev->rst_gpio = of_get_named_gpio(np, "reset-gpios", i); + if (gpio_is_valid(tas_dev->rst_gpio)) { + rc = gpio_request(tas_dev->rst_gpio, "reset"); + if (!rc) + gpio_direction_output(tas_dev->rst_gpio, 1); + } + + strcpy(tas_dev->dev_name, tasdevice_id[tas_dev->chip_id].name); + + tas_dev->irq_info.irq_gpio = of_get_named_gpio(np, + "interrupts", 0); + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) { + rc = gpio_request(tas_dev->irq_info.irq_gpio, + "AUDEV-IRQ"); + if (!rc) { + gpio_direction_input( + tas_dev->irq_info.irq_gpio); + + tas_dev->irq_info.irq = + gpio_to_irq(tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, + "%s: GPIO %d request error\n", + __func__, + tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, + "Looking up irq-gpio property in node %s failed %d\n", + np->full_name, + tas_dev->irq_info.irq_gpio); + + return 0; +} + +static int tasdevice_change_chn_book(struct tasdevice_priv *tas_dev, + enum channel chn, int book) +{ + int ret = 0; + struct i2c_client *client = + (struct i2c_client *)tas_dev->client; + + if (chn < tas_dev->ndev) { + if (tas_dev->glb_addr.ref_cnt != 0) { + tas_dev->glb_addr.ref_cnt = 0; + tas_dev->glb_addr.cur_book = -1; + } + client->addr = tas_dev->tasdevice[chn].dev_addr; + if (tas_dev->tasdevice[chn].cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + goto out; + } + tas_dev->tasdevice[chn].cur_book = book; + } + } else if (chn == tas_dev->ndev) { + int i = 0; + + if (tas_dev->glb_addr.ref_cnt == 0) + for (i = 0; i < tas_dev->ndev; i++) + tas_dev->tasdevice[i].cur_book = -1; + client->addr = tas_dev->glb_addr.dev_addr; + if (tas_dev->glb_addr.cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_PAGE, 0); + if (ret < 0) { + dev_err(tas_dev->dev, + "%s, 0ERROR, E=%d\n", + __func__, ret); + goto out; + } + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, + "%s, book%xERROR, E=%d\n", + __func__, book, ret); + goto out; + } + tas_dev->glb_addr.cur_book = book; + } + + tas_dev->glb_addr.ref_cnt++; + } else + dev_err(tas_dev->dev, + "%s, ERROR, no such channel(%d)\n", + __func__, chn); + +out: + return ret; +} + +int tasdevice_dev_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int *val) +{ + int ret = 0; + + mutex_lock(&tas_dev->dev_lock); + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), val); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR,E=%d\n", + __func__, ret); + } else { + + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + } + +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +int tasdevice_dev_write(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int value) +{ + int ret = 0; + + mutex_lock(&tas_dev->dev_lock); + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + mutex_lock(&tas_dev->dev_lock); + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + mutex_lock(&tas_dev->dev_lock); + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value) +{ + int ret = 0; + struct i2c_client *client = + (struct i2c_client *)tas_dev->client; + + mutex_lock(&tas_dev->dev_lock); + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + client->addr = tas_dev->tasdevice[chn].dev_addr; + ret = regmap_update_bits(tas_dev->regmap, + TASDEVICE_PGRG(reg), mask, value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else { + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + ret = -1; + } + +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +static void tas2781_set_global_mode(struct tasdevice_priv *tas_dev) +{ + int i = 0; + int ret = 0; + + for (; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + TAS2871_MISC_CFG2, TAS2871_GLOBAL_ADDR_MASK, + TAS2871_GLOBAL_ADDR_ENABLE); + if (ret < 0) { + dev_err(tas_dev->dev, + "%s: chn %d set global fail, %d\n", + __func__, i, ret); + continue; + } + } +} + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret = 0, i = 0; + + tas_dev->cur_prog = -1; + tas_dev->cur_conf = -1; + + for (i = 0; i < tas_dev->ndev; i++) { + tas_dev->tasdevice[i].cur_book = -1; + tas_dev->tasdevice[i].cur_prog = -1; + tas_dev->tasdevice[i].cur_conf = -1; + } + mutex_init(&tas_dev->dev_lock); + if (tas_dev->glb_addr.dev_addr != 0 + && tas_dev->glb_addr.dev_addr < 0x7F) + tas_dev->set_global_mode = tas2781_set_global_mode; + dev_set_drvdata(tas_dev->dev, tas_dev); + + mutex_init(&tas_dev->codec_lock); + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:0x%08x\n", + __func__, ret); + goto out; + } + +out: + return ret; +} + +static void tasdevice_remove(struct tasdevice_priv *tas_dev) +{ + snd_soc_unregister_component(tas_dev->dev); + if (gpio_is_valid(tas_dev->rst_gpio)) + gpio_free(tas_dev->rst_gpio); + + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) + gpio_free(tas_dev->irq_info.irq_gpio); + + mutex_destroy(&tas_dev->dev_lock); + mutex_destroy(&tas_dev->codec_lock); +} + +static int tasdevice_i2c_probe(struct i2c_client *i2c) +{ + struct tasdevice_priv *tas_dev = NULL; + int ret = 0; + const struct i2c_device_id *id = i2c_match_id(tasdevice_id, i2c); + + tas_dev = devm_kzalloc(&i2c->dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) { + ret = -ENOMEM; + goto out; + } + tas_dev->dev = &i2c->dev; + tas_dev->client = (void *)i2c; + tas_dev->chip_id = id->driver_data; + + if (i2c->dev.of_node) + ret = tasdevice_parse_dt(tas_dev); + else { + dev_err(tas_dev->dev, "No DTS info\n"); + goto out; + } + + tas_dev->regmap = devm_regmap_init_i2c(i2c, + &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) { + ret = PTR_ERR(tas_dev->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + goto out; + } + ret = tasdevice_init(tas_dev); + +out: + if (ret < 0 && tas_dev != NULL) + tasdevice_remove(tas_dev); + return ret; + +} + +static void tasdevice_i2c_remove(struct i2c_client *client) +{ + struct tasdevice_priv *tas_dev = i2c_get_clientdata(client); + + if (tas_dev) + tasdevice_remove(tas_dev); + +} + +static struct i2c_driver tasdevice_i2c_driver = { + .driver = { + .name = "tas2781-codec", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tasdevice_of_match), + }, + .probe = tasdevice_i2c_probe, + .remove = tasdevice_i2c_remove, + .id_table = tasdevice_id, +}; + +module_i2c_driver(tasdevice_i2c_driver); + +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_AUTHOR("Kevin Lu <kevin-lu(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2781 Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2781.h b/sound/soc/codecs/tas2781.h new file mode 100644 index 000000000000..5056290fe963 --- /dev/null +++ b/sound/soc/codecs/tas2781.h @@ -0,0 +1,170 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TAS2781_H__ +#define __TAS2781_H__ + +#include "tas2781-dsp.h" + +#define SMARTAMP_MODULE_NAME "tas2781" +#define TASDEVICE_RETRY_COUNT 3 +#define TASDEVICE_ERROR_FAILED -2 + +#define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\ + SNDRV_PCM_RATE_88200) +#define TASDEVICE_MAX_CHANNELS 8 + +#define TASDEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/*PAGE Control Register (available in page0 of each book) */ +#define TASDEVICE_PAGE_SELECT 0x00 +#define TASDEVICE_BOOKCTL_PAGE 0x00 +#define TASDEVICE_BOOKCTL_REG 127 +#define TASDEVICE_BOOK_ID(reg) (reg / (256 * 128)) +#define TASDEVICE_PAGE_ID(reg) ((reg % (256 * 128)) / 128) +#define TASDEVICE_PAGE_REG(reg) ((reg % (256 * 128)) % 128) +#define TASDEVICE_PGRG(reg) ((reg % (256 * 128))) +#define TASDEVICE_REG(book, page, reg) (((book * 256 * 128) + \ + (page * 128)) + reg) + + /*Software Reset */ +#define TAS2871_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x02) +#define TAS2871_REG_SWRESET_RESET BIT(0) + + /* Enable Global addresses */ +#define TAS2871_MISC_CFG2 TASDEVICE_REG(0x0, 0X0, 0x07) +#define TAS2871_GLOBAL_ADDR_MASK BIT(1) +#define TAS2871_GLOBAL_ADDR_ENABLE BIT(1) + + /*I2C Checksum */ +#define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) + + /* Volume control */ +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) + +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + +enum audio_device { + TAS2781 = 0, +}; + +#define SMS_HTONS(a, b) ((((a)&0x00FF)<<8) | ((b)&0x00FF)) +#define SMS_HTONL(a, b, c, d) ((((a)&0x000000FF)<<24) | \ + (((b)&0x000000FF)<<16) | (((c)&0x000000FF)<<8) | \ + ((d)&0x000000FF)) + +struct tasdevice { + unsigned int dev_addr; + unsigned int err_code; + short cur_prog; + short cur_conf; + bool is_loading; + bool is_loaderr; + bool is_calibrated_data_loaded; + unsigned char cur_book; + struct tasdevice_fw *cali_data_fmw; +}; + +/* + * This item is used to store the generic i2c address of + * all the tas2781 devices for I2C broadcast during the multi-device + * writes, useless in mono case. + */ +struct global_addr { + unsigned char cur_book; + unsigned int dev_addr; + int ref_cnt; +}; + +struct tas_control { + struct snd_kcontrol_new *tasdevice_profile_controls; + int nr_controls; +}; + +struct tasdevice_irqinfo { + int irq_gpio; + int irq; +}; + +struct tasdevice_priv { + struct device *dev; + void *client; + struct regmap *regmap; + struct mutex codec_lock; + struct mutex dev_lock; + int rst_gpio; + struct tasdevice tasdevice[max_chn]; + struct tasdevice_fw *fmw; + struct tasdevice_rca rcabin; + struct tasdevice_irqinfo irq_info; + struct tas_control tas_ctrl; + struct global_addr glb_addr; + int cur_prog; + int cur_conf; + unsigned int chip_id; + void (*set_global_mode)(struct tasdevice_priv *tas_dev); + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_dev, + const struct firmware *fmw, int offset); + int (*fw_parse_program_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*tasdevice_load_block)(struct tasdevice_priv *tas_dev, + struct tasdev_blk *pBlock); + int (*fw_parse_calibration_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int fw_state; + unsigned int magic_num; + unsigned char ndev; + unsigned char dev_name[32]; + unsigned char rca_binaryname[64]; + unsigned char coef_binaryname[64]; + unsigned char cal_binaryname[max_chn][64]; + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + void *codec; + unsigned int sysclk; + bool is_glb_calibrated_data_loaded; +}; + +int tasdevice_dev_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int *value); +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize); +int tasdevice_dev_write(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int value); + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned char *p_data, unsigned int n_length); + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned char *p_data, + unsigned int n_length); + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value); + +#endif /*__TAS2781_H__ */ -- 2.34.1

4 5

[PATCH 00/11] Enable I2S support for RK3588/RK3588S SoCs
by Cristian Ciocaltea 20 Mar '23

20 Mar '23

There are five I2S/PCM/TDM controllers and two I2S/PCM controllers embedded in the RK3588 and RK3588S SoCs. Furthermore, RK3588 provides four additional I2S/PCM/TDM controllers. This patch series adds the required device tree nodes to support all the above. Additionally, it enables analog audio support for the Rock 5B SBC, which has been used to test both audio playback and recording. Note that some of the DT bindings fixes in this series are not particularly related to I2S, but are required for a proper dtbs_check validation. Cristian Ciocaltea (11): dt-bindings: firmware: arm,scmi: Document assigned-clocks and assigned-clock-rates dt-bindings: serial: snps-dw-apb-uart: Relax dma-names order constraint ASoC: dt-bindings: everest,es8316: Document audio graph port ASoC: dt-bindings: rockchip: Document audio graph port ASoC: dt-bindings: rockchip: i2s-tdm: Document audio graph port ASoC: dt-bindings: rockchip: i2s-tdm: Document power-domains ASoC: dt-bindings: rockchip: Add compatible for RK3588 ASoC: rockchip: i2s: Add compatible for RK3588 arm64: dts: rockchip: rk3588s: Add I2S nodes arm64: dts: rockchip: rk3588: Add I2S nodes arm64: dts: rockchip: rk3588-rock-5b: Add analog audio .../bindings/firmware/arm,scmi.yaml | 3 + .../bindings/serial/snps-dw-apb-uart.yaml | 10 +- .../bindings/sound/everest,es8316.yaml | 4 + .../bindings/sound/rockchip,i2s-tdm.yaml | 7 + .../bindings/sound/rockchip-i2s.yaml | 5 + .../boot/dts/rockchip/rk3588-rock-5b.dts | 62 ++++++++ arch/arm64/boot/dts/rockchip/rk3588.dtsi | 68 ++++++++ arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 148 ++++++++++++++++++ sound/soc/rockchip/rockchip_i2s.c | 1 + 9 files changed, 305 insertions(+), 3 deletions(-) -- 2.39.1

6 29

[PATCH V6 00/15] Add support for stacked/parallel memories
by Amit Kumar Mahapatra 20 Mar '23

20 Mar '23

This patch is in the continuation to the discussions which happened on 'commit f89504300e94 ("spi: Stacked/parallel memories bindings")' for adding dt-binding support for stacked/parallel memories. This patch series updated the spi-nor, spi core and the spi drivers to add stacked and parallel memories support. The first patch https://lore.kernel.org/all/20230119185342.2093323-1-amit.kumar-mahapatra@a… of the previous series got applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next But the rest of the patches in the series did not get applied due to merge conflict, so send the remaining patches in the series after rebasing it on top of for-next branch. --- BRANCH: for-next Changes in v6: - Rebased on top of latest v6.3-rc1 and fixed merge conflicts in spi-mpc512x-psc.c, sfdp.c, spansion.c files and removed spi-omap-100k.c. - Updated spi_dev_check( ) to reject new devices if any one of the chipselect is used by another device. Changes in v5: - Rebased the patches on top of v6.3-rc1 and fixed the merge conflicts. - Fixed compilation warnings in spi-sh-msiof.c with shmobile_defconfig Changes in v4: - Fixed build error in spi-pl022.c file - reported by Mark. - Fixed build error in spi-sn-f-ospi.c file. - Added Reviewed-by: Serge Semin <fancer.lancer(a)gmail.com> tag. - Added two more patches to replace spi->chip_select with API calls in mpc832x_rdb.c & cs35l41_hda_spi.c files. Changes in v3: - Rebased the patches on top of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next - Added a patch to convert spi_nor_otp_region_len(nor) & spi_nor_otp_n_regions(nor) macros into inline functions - Added Reviewed-by & Acked-by tags Changes in v2: - Rebased the patches on top of v6.2-rc1 - Created separate patch to add get & set APIs for spi->chip_select & spi->cs_gpiod, and replaced all spi->chip_select and spi->cs_gpiod references with the API calls. - Created separate patch to add get & set APIs for nor->params. --- Amit Kumar Mahapatra (15): spi: Replace all spi->chip_select and spi->cs_gpiod references with function call net: Replace all spi->chip_select and spi->cs_gpiod references with function call iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call staging: Replace all spi->chip_select and spi->cs_gpiod references with function call platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call powerpc/83xx/mpc832x_rdb: Replace all spi->chip_select references with function call ALSA: hda: cs35l41: Replace all spi->chip_select references with function call spi: Add stacked and parallel memories support in SPI core mtd: spi-nor: Convert macros with inline functions mtd: spi-nor: Add APIs to set/get nor->params mtd: spi-nor: Add stacked memories support in spi-nor spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver mtd: spi-nor: Add parallel memories support in spi-nor spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver arch/powerpc/platforms/83xx/mpc832x_rdb.c | 2 +- drivers/iio/imu/adis16400.c | 2 +- drivers/mtd/devices/mtd_dataflash.c | 2 +- drivers/mtd/spi-nor/atmel.c | 17 +- drivers/mtd/spi-nor/core.c | 665 +++++++++++++++--- drivers/mtd/spi-nor/core.h | 8 + drivers/mtd/spi-nor/debugfs.c | 4 +- drivers/mtd/spi-nor/gigadevice.c | 4 +- drivers/mtd/spi-nor/issi.c | 11 +- drivers/mtd/spi-nor/macronix.c | 6 +- drivers/mtd/spi-nor/micron-st.c | 39 +- drivers/mtd/spi-nor/otp.c | 48 +- drivers/mtd/spi-nor/sfdp.c | 29 +- drivers/mtd/spi-nor/spansion.c | 50 +- drivers/mtd/spi-nor/sst.c | 7 +- drivers/mtd/spi-nor/swp.c | 22 +- drivers/mtd/spi-nor/winbond.c | 10 +- drivers/mtd/spi-nor/xilinx.c | 18 +- drivers/net/ethernet/adi/adin1110.c | 2 +- drivers/net/ethernet/asix/ax88796c_main.c | 2 +- drivers/net/ethernet/davicom/dm9051.c | 2 +- drivers/net/ethernet/qualcomm/qca_debug.c | 2 +- drivers/net/ieee802154/ca8210.c | 2 +- drivers/net/wan/slic_ds26522.c | 2 +- .../net/wireless/marvell/libertas/if_spi.c | 2 +- drivers/net/wireless/silabs/wfx/bus_spi.c | 2 +- drivers/net/wireless/st/cw1200/cw1200_spi.c | 2 +- .../platform/x86/serial-multi-instantiate.c | 3 +- drivers/spi/spi-altera-core.c | 2 +- drivers/spi/spi-amd.c | 4 +- drivers/spi/spi-ar934x.c | 2 +- drivers/spi/spi-armada-3700.c | 4 +- drivers/spi/spi-aspeed-smc.c | 13 +- drivers/spi/spi-at91-usart.c | 2 +- drivers/spi/spi-ath79.c | 4 +- drivers/spi/spi-atmel.c | 26 +- drivers/spi/spi-au1550.c | 4 +- drivers/spi/spi-axi-spi-engine.c | 2 +- drivers/spi/spi-bcm-qspi.c | 10 +- drivers/spi/spi-bcm2835.c | 19 +- drivers/spi/spi-bcm2835aux.c | 4 +- drivers/spi/spi-bcm63xx-hsspi.c | 30 +- drivers/spi/spi-bcm63xx.c | 2 +- drivers/spi/spi-bcmbca-hsspi.c | 30 +- drivers/spi/spi-cadence-quadspi.c | 5 +- drivers/spi/spi-cadence-xspi.c | 4 +- drivers/spi/spi-cadence.c | 4 +- drivers/spi/spi-cavium.c | 8 +- drivers/spi/spi-coldfire-qspi.c | 8 +- drivers/spi/spi-davinci.c | 18 +- drivers/spi/spi-dln2.c | 6 +- drivers/spi/spi-dw-core.c | 2 +- drivers/spi/spi-dw-mmio.c | 4 +- drivers/spi/spi-falcon.c | 2 +- drivers/spi/spi-fsi.c | 2 +- drivers/spi/spi-fsl-dspi.c | 16 +- drivers/spi/spi-fsl-espi.c | 6 +- drivers/spi/spi-fsl-lpspi.c | 2 +- drivers/spi/spi-fsl-qspi.c | 6 +- drivers/spi/spi-fsl-spi.c | 2 +- drivers/spi/spi-geni-qcom.c | 6 +- drivers/spi/spi-gpio.c | 4 +- drivers/spi/spi-gxp.c | 4 +- drivers/spi/spi-hisi-sfc-v3xx.c | 2 +- drivers/spi/spi-img-spfi.c | 14 +- drivers/spi/spi-imx.c | 30 +- drivers/spi/spi-ingenic.c | 4 +- drivers/spi/spi-intel.c | 2 +- drivers/spi/spi-jcore.c | 4 +- drivers/spi/spi-lantiq-ssc.c | 6 +- drivers/spi/spi-mem.c | 4 +- drivers/spi/spi-meson-spicc.c | 2 +- drivers/spi/spi-microchip-core.c | 6 +- drivers/spi/spi-mpc512x-psc.c | 8 +- drivers/spi/spi-mpc52xx.c | 2 +- drivers/spi/spi-mt65xx.c | 6 +- drivers/spi/spi-mt7621.c | 2 +- drivers/spi/spi-mux.c | 8 +- drivers/spi/spi-mxic.c | 10 +- drivers/spi/spi-mxs.c | 2 +- drivers/spi/spi-npcm-fiu.c | 20 +- drivers/spi/spi-nxp-fspi.c | 10 +- drivers/spi/spi-omap-uwire.c | 8 +- drivers/spi/spi-omap2-mcspi.c | 24 +- drivers/spi/spi-orion.c | 4 +- drivers/spi/spi-pci1xxxx.c | 4 +- drivers/spi/spi-pic32-sqi.c | 2 +- drivers/spi/spi-pic32.c | 4 +- drivers/spi/spi-pl022.c | 4 +- drivers/spi/spi-pxa2xx.c | 6 +- drivers/spi/spi-qcom-qspi.c | 2 +- drivers/spi/spi-rb4xx.c | 2 +- drivers/spi/spi-rockchip-sfc.c | 2 +- drivers/spi/spi-rockchip.c | 26 +- drivers/spi/spi-rspi.c | 10 +- drivers/spi/spi-s3c64xx.c | 2 +- drivers/spi/spi-sc18is602.c | 4 +- drivers/spi/spi-sh-msiof.c | 6 +- drivers/spi/spi-sh-sci.c | 2 +- drivers/spi/spi-sifive.c | 6 +- drivers/spi/spi-sn-f-ospi.c | 2 +- drivers/spi/spi-st-ssc4.c | 2 +- drivers/spi/spi-stm32-qspi.c | 12 +- drivers/spi/spi-sun4i.c | 2 +- drivers/spi/spi-sun6i.c | 2 +- drivers/spi/spi-synquacer.c | 6 +- drivers/spi/spi-tegra114.c | 28 +- drivers/spi/spi-tegra20-sflash.c | 2 +- drivers/spi/spi-tegra20-slink.c | 6 +- drivers/spi/spi-tegra210-quad.c | 8 +- drivers/spi/spi-ti-qspi.c | 16 +- drivers/spi/spi-topcliff-pch.c | 4 +- drivers/spi/spi-wpcm-fiu.c | 12 +- drivers/spi/spi-xcomm.c | 2 +- drivers/spi/spi-xilinx.c | 6 +- drivers/spi/spi-xlp.c | 4 +- drivers/spi/spi-zynq-qspi.c | 2 +- drivers/spi/spi-zynqmp-gqspi.c | 58 +- drivers/spi/spi.c | 225 ++++-- drivers/spi/spidev.c | 6 +- drivers/staging/fbtft/fbtft-core.c | 2 +- drivers/staging/greybus/spilib.c | 2 +- include/linux/mtd/spi-nor.h | 18 +- include/linux/spi/spi.h | 34 +- include/trace/events/spi.h | 10 +- sound/pci/hda/cs35l41_hda_spi.c | 2 +- 126 files changed, 1350 insertions(+), 615 deletions(-) -- 2.25.1

5 19

[PATCH 1/2] ASoC: fsl: define a common DRIVER_NAME
by Alexander Stein 20 Mar '23

20 Mar '23

Instead of copying the driver name manually, use a common define. No functional change. Signed-off-by: Alexander Stein <alexander.stein(a)ew.tq-group.com> --- sound/soc/fsl/fsl-asoc-card.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index cdfca9fd1eb0..e956abfd50f8 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -28,6 +28,8 @@ #include "../codecs/wm8994.h" #include "../codecs/tlv320aic31xx.h" +#define DRIVER_NAME "fsl-asoc-card" + #define CS427x_SYSCLK_MCLK 0 #define RX 0 @@ -915,7 +917,7 @@ MODULE_DEVICE_TABLE(of, fsl_asoc_card_dt_ids); static struct platform_driver fsl_asoc_card_driver = { .probe = fsl_asoc_card_probe, .driver = { - .name = "fsl-asoc-card", + .name = DRIVER_NAME, .pm = &snd_soc_pm_ops, .of_match_table = fsl_asoc_card_dt_ids, }, @@ -924,5 +926,5 @@ module_platform_driver(fsl_asoc_card_driver); MODULE_DESCRIPTION("Freescale Generic ASoC Sound Card driver with ASRC"); MODULE_AUTHOR("Nicolin Chen <nicoleotsuka(a)gmail.com>"); -MODULE_ALIAS("platform:fsl-asoc-card"); +MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_LICENSE("GPL"); -- 2.34.1

3 4

[PATCH] ASoC: dt-bindings: Drop unneeded quotes
by Rob Herring 20 Mar '23

20 Mar '23

Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh(a)kernel.org> --- .../bindings/sound/adi,adau1372.yaml | 2 +- .../bindings/sound/adi,max98396.yaml | 8 +++--- .../bindings/sound/audio-graph-port.yaml | 22 ++++++++-------- .../bindings/sound/audio-graph.yaml | 8 +++--- .../bindings/sound/cirrus,cs35l45.yaml | 2 +- .../bindings/sound/cirrus,cs42l42.yaml | 12 ++++----- .../bindings/sound/mt8186-afe-pcm.yaml | 6 ++--- .../sound/mt8186-mt6366-da7219-max98357.yaml | 2 +- .../sound/mt8186-mt6366-rt1019-rt5682s.yaml | 2 +- .../bindings/sound/mt8192-afe-pcm.yaml | 6 ++--- .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 4 +-- .../bindings/sound/mt8195-afe-pcm.yaml | 2 +- .../bindings/sound/mt8195-mt6359.yaml | 8 +++--- .../sound/nvidia,tegra-audio-alc5632.yaml | 8 +++--- .../sound/nvidia,tegra-audio-max98090.yaml | 8 +++--- .../sound/nvidia,tegra-audio-rt5640.yaml | 6 ++--- .../sound/nvidia,tegra-audio-rt5677.yaml | 26 +++++++++---------- .../sound/nvidia,tegra-audio-sgtl5000.yaml | 6 ++--- .../sound/nvidia,tegra-audio-wm8753.yaml | 6 ++--- .../sound/nvidia,tegra-audio-wm8903.yaml | 8 +++--- .../sound/nvidia,tegra-audio-wm9712.yaml | 8 +++--- .../bindings/sound/qcom,q6asm-dais.yaml | 2 +- .../bindings/sound/renesas,rsnd.yaml | 2 +- .../devicetree/bindings/sound/sgtl5000.yaml | 6 ++--- .../bindings/sound/simple-card.yaml | 2 +- .../sound/socionext,uniphier-aio.yaml | 2 +- 26 files changed, 87 insertions(+), 87 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml index 044bcd370d49..ea62e51aba90 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml @@ -32,7 +32,7 @@ properties: maxItems: 1 clock-names: - const: "mclk" + const: mclk powerdown-gpios: description: GPIO used for hardware power-down. diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml index fd5aa61b467f..bdc10d4204ec 100644 --- a/Documentation/devicetree/bindings/sound/adi,max98396.yaml +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -41,21 +41,21 @@ properties: adi,vmon-slot-no: description: slot number of the voltage sense monitor - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 15 default: 0 adi,imon-slot-no: description: slot number of the current sense monitor - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 15 default: 1 adi,spkfb-slot-no: description: slot number of speaker DSP monitor - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 15 default: 2 @@ -64,7 +64,7 @@ properties: description: Selects the PCM data input channel that is routed to the speaker audio processing bypass path. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 15 default: 0 diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml index 6b4e02a0695a..fa9f9a853365 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml @@ -16,19 +16,19 @@ definitions: $ref: /schemas/graph.yaml#/$defs/port-base properties: convert-rate: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate" + $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate convert-channels: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels" + $ref: /schemas/sound/dai-params.yaml#/$defs/dai-channels convert-sample-format: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format" + $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-format mclk-fs: - $ref: "simple-card.yaml#/definitions/mclk-fs" + $ref: simple-card.yaml#/definitions/mclk-fs endpoint-base: $ref: /schemas/graph.yaml#/$defs/endpoint-base properties: mclk-fs: - $ref: "simple-card.yaml#/definitions/mclk-fs" + $ref: simple-card.yaml#/definitions/mclk-fs frame-inversion: description: dai-link uses frame clock inversion $ref: /schemas/types.yaml#/definitions/flag @@ -49,11 +49,11 @@ definitions: description: Indicates system clock $ref: /schemas/types.yaml#/definitions/phandle system-clock-frequency: - $ref: "simple-card.yaml#/definitions/system-clock-frequency" + $ref: simple-card.yaml#/definitions/system-clock-frequency system-clock-direction-out: - $ref: "simple-card.yaml#/definitions/system-clock-direction-out" + $ref: simple-card.yaml#/definitions/system-clock-direction-out system-clock-fixed: - $ref: "simple-card.yaml#/definitions/system-clock-fixed" + $ref: simple-card.yaml#/definitions/system-clock-fixed dai-format: description: audio format. @@ -69,11 +69,11 @@ definitions: - msb - lsb convert-rate: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate" + $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate convert-channels: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels" + $ref: /schemas/sound/dai-params.yaml#/$defs/dai-channels convert-sample-format: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format" + $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-format dai-tdm-slot-num: description: Number of slots in use. diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml index d59baedee180..c87eb91de159 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml @@ -15,7 +15,7 @@ properties: label: maxItems: 1 prefix: - description: "device name prefix" + description: device name prefix $ref: /schemas/types.yaml#/definitions/string routing: description: | @@ -27,11 +27,11 @@ properties: description: User specified audio sound widgets. $ref: /schemas/types.yaml#/definitions/non-unique-string-array convert-rate: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate" + $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate convert-channels: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels" + $ref: /schemas/sound/dai-params.yaml#/$defs/dai-channels convert-sample-format: - $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format" + $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-format pa-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml index 88a0ca474c3d..b79990cf4f9f 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml @@ -45,7 +45,7 @@ properties: Audio serial port SDOUT Hi-Z control. Sets the Hi-Z configuration for SDOUT pin of amplifier. Logical OR of CS35L45_ASP_TX_HIZ_xxx values. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 default: 2 diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml index 7356084a2ca2..af599d8735e2 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml @@ -68,7 +68,7 @@ properties: This is "normal tip sense (TS)" in the datasheet. The CS42L42_TS_INV_* defines are available for this. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 @@ -87,7 +87,7 @@ properties: 7 - 1.5s The CS42L42_TS_DBNCE_* defines are available for this. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 7 @@ -106,7 +106,7 @@ properties: 7 - 1.5s The CS42L42_TS_DBNCE_* defines are available for this. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 7 @@ -120,7 +120,7 @@ properties: 0ms - 200ms, Default = 100ms - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 200 @@ -133,7 +133,7 @@ properties: 0ms - 20ms, Default = 10ms - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 20 @@ -169,7 +169,7 @@ properties: 3 - Slowest The CS42L42_HSBIAS_RAMP_* defines are available for this. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 diff --git a/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml index 88f82d096443..7fe85b08f9df 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml @@ -26,15 +26,15 @@ properties: const: audiosys mediatek,apmixedsys: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek apmixedsys controller mediatek,infracfg: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek infracfg controller mediatek,topckgen: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek topckgen controller clocks: diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml index d427f7f623db..9853c11a1330 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml @@ -18,7 +18,7 @@ properties: - mediatek,mt8186-mt6366-da7219-max98357-sound mediatek,platform: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8186 ASoC platform. headset-codec: diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml index aa23b0024c46..d80083df03eb 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml @@ -19,7 +19,7 @@ properties: - mediatek,mt8186-mt6366-rt5682s-max98360-sound mediatek,platform: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8186 ASoC platform. dmic-gpios: diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml index 7a25bc9b8060..064ef172bef4 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml @@ -24,15 +24,15 @@ properties: const: audiosys mediatek,apmixedsys: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek apmixedsys controller mediatek,infracfg: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek infracfg controller mediatek,topckgen: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek topckgen controller power-domains: diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml index c6e614c1c30b..7e50f5d65c8f 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -21,11 +21,11 @@ properties: - mediatek,mt8192_mt6359_rt1015p_rt5682s mediatek,platform: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8192 ASoC platform. mediatek,hdmi-codec: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of HDMI codec. headset-codec: diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml index 4452a4070eff..d5adf07d46e0 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml @@ -32,7 +32,7 @@ properties: See ../reserved-memory/reserved-memory.txt for details. mediatek,topckgen: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek topckgen controller power-domains: diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml index ad3447ff8b2c..c1ddbf672ca3 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml @@ -24,19 +24,19 @@ properties: description: User specified audio sound card name mediatek,platform: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 ASoC platform. mediatek,dptx-codec: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 Display Port Tx codec node. mediatek,hdmi-codec: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 HDMI codec node. mediatek,adsp: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of MT8195 ADSP platform. mediatek,dai-link: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml index 7ef774910e5c..96f2f927a6f5 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml @@ -31,10 +31,10 @@ properties: items: enum: # Board Connectors - - "Headset Stereophone" - - "Int Spk" - - "Headset Mic" - - "Digital Mic" + - Headset Stereophone + - Int Spk + - Headset Mic + - Digital Mic # CODEC Pins - SPKOUT diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml index ccc2ee77ca30..4d912458b18b 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml @@ -38,10 +38,10 @@ properties: items: enum: # Board Connectors - - "Headphones" - - "Speakers" - - "Mic Jack" - - "Int Mic" + - Headphones + - Speakers + - Mic Jack + - Int Mic # CODEC Pins - MIC1 diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml index b1deaf271afa..2638592435b2 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml @@ -31,9 +31,9 @@ properties: items: enum: # Board Connectors - - "Headphones" - - "Speakers" - - "Mic Jack" + - Headphones + - Speakers + - Mic Jack # CODEC Pins - DMIC1 diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml index a49997d6028b..09e1d0b18d27 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml @@ -31,11 +31,11 @@ properties: items: enum: # Board Connectors - - "Headphone" - - "Speaker" - - "Headset Mic" - - "Internal Mic 1" - - "Internal Mic 2" + - Headphone + - Speaker + - Headset Mic + - Internal Mic 1 + - Internal Mic 2 # CODEC Pins - IN1P @@ -47,14 +47,14 @@ properties: - DMIC2 - DMIC3 - DMIC4 - - "DMIC L1" - - "DMIC L2" - - "DMIC L3" - - "DMIC L4" - - "DMIC R1" - - "DMIC R2" - - "DMIC R3" - - "DMIC R4" + - DMIC L1 + - DMIC L2 + - DMIC L3 + - DMIC L4 + - DMIC R1 + - DMIC R2 + - DMIC R3 + - DMIC R4 - LOUT1 - LOUT2 - LOUT3 diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml index 943e7c01741c..e5bc6a6ade24 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml @@ -31,9 +31,9 @@ properties: items: enum: # Board Connectors - - "Headphone Jack" - - "Line In Jack" - - "Mic Jack" + - Headphone Jack + - Line In Jack + - Mic Jack # CODEC Pins - HP_OUT diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml index a5b431d7d0c2..3323d6a438f5 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml @@ -31,8 +31,8 @@ properties: items: enum: # Board Connectors - - "Headphone Jack" - - "Mic Jack" + - Headphone Jack + - Mic Jack # CODEC Pins - LOUT1 @@ -53,7 +53,7 @@ properties: - MIC1 - MIC2N - MIC2 - - "Mic Bias" + - Mic Bias required: - nvidia,i2s-controller diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml index 1b836acab980..1be25ce4514b 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml @@ -35,10 +35,10 @@ properties: items: enum: # Board Connectors - - "Headphone Jack" - - "Int Spk" - - "Mic Jack" - - "Int Mic" + - Headphone Jack + - Int Spk + - Mic Jack + - Int Mic # CODEC Pins - IN1L diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml index a1448283344b..397306b8800d 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml @@ -31,9 +31,9 @@ properties: items: enum: # Board Connectors - - "Headphone" - - "LineIn" - - "Mic" + - Headphone + - LineIn + - Mic # CODEC Pins - MONOOUT @@ -48,7 +48,7 @@ properties: - PCBEEP - MIC1 - MIC2 - - "Mic Bias" + - Mic Bias required: - nvidia,ac97-controller diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml index 0110b38f6de9..ce811942a9f1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml @@ -56,7 +56,7 @@ patternProperties: Compress offload dai. dependencies: - is-compress-dai: ["direction"] + is-compress-dai: [ direction ] required: - reg diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 12ccf29338d9..5cfe71994bf7 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -155,7 +155,7 @@ properties: dmas: maxItems: 1 dma-names: - const: "tx" + const: tx required: - dmas - dma-names diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml index 02059d66b084..1353c051488f 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml @@ -50,7 +50,7 @@ properties: description: The bias voltage to be used in mVolts. The voltage can take values from 1.25V to 3V by 250mV steps. If this node is not mentioned or the value is unknown, then the value is set to 1.25V. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ] lrclk-strength: @@ -63,7 +63,7 @@ properties: 1 = 1.66 mA 2.87 mA 4.02 mA 2 = 3.33 mA 5.74 mA 8.03 mA 3 = 4.99 mA 8.61 mA 12.05 mA - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 0, 1, 2, 3 ] sclk-strength: @@ -76,7 +76,7 @@ properties: 1 = 1.66 mA 2.87 mA 4.02 mA 2 = 3.33 mA 5.74 mA 8.03 mA 3 = 4.99 mA 8.61 mA 12.05 mA - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 0, 1, 2, 3 ] port: diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index 806e2fff165f..b05e05c81cc4 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -78,7 +78,7 @@ definitions: $ref: /schemas/types.yaml#/definitions/uint32 prefix: - description: "device name prefix" + description: device name prefix $ref: /schemas/types.yaml#/definitions/string label: diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml index 9cf0efaed88e..8600520d7c47 100644 --- a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml @@ -42,7 +42,7 @@ properties: Specifies a phandle to soc-glue, which is used for changing mode of S/PDIF signal pin to output from Hi-Z. This property is optional if you use I2S signal pins only. - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle "#sound-dai-cells": const: 1 -- 2.39.2

3 2

[PATCH v2 0/7] Add the Lantiq PEF2256 audio support
by Herve Codina 20 Mar '23

20 Mar '23

Hi, This series adds support for audio using the Lantiq PEF2256 framer. The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. The first part of this series (patches 1 to 4) adds the Lantiq PEF2256 driver core. The second part (patches 5 to 7) adds the audio support using the Lantiq PEF2256 driver core. The consumer/provider relation between the codec and the driver core allows to use the PEF2256 framer for other purpose than audio support. This v2 series fixes issues raised by the kernel test robot - devm_platform_ioremap_resource symbol undefined - duplicate const qualifier - Block quote ends without a blank line Best regards, Herve Codina Changes v1 -> v2 - Patch 2 Remove duplicate const qualifiers. Add HAS_IOMEM as a dependency - Patch 3 Fix a "Block quote ends without a blank line; unexpected unindent" syntax issue. Herve Codina (7): dt-bindings: misc: Add the Lantiq PEF2466 E1/T1/J1 framer drivers: misc: Add support for the Lantiq PEF2256 framer Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry MAINTAINERS: Add the Lantiq PEF2256 driver entry dt-bindings: sound: Add support for the Lantiq PEF2256 codec ASoC: codecs: Add support for the Lantiq PEF2256 codec MAINTAINERS: Add the Lantiq PEF2256 ASoC codec entry .../sysfs-bus-platform-devices-pef2256 | 12 + .../bindings/misc/lantiq,pef2256.yaml | 190 +++ .../bindings/sound/lantiq,pef2256-codec.yaml | 57 + MAINTAINERS | 15 + drivers/misc/Kconfig | 17 + drivers/misc/Makefile | 1 + drivers/misc/pef2256.c | 1441 +++++++++++++++++ include/linux/pef2256.h | 36 + sound/soc/codecs/Kconfig | 14 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/pef2256-codec.c | 395 +++++ 11 files changed, 2180 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256 create mode 100644 Documentation/devicetree/bindings/misc/lantiq,pef2256.yaml create mode 100644 Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml create mode 100644 drivers/misc/pef2256.c create mode 100644 include/linux/pef2256.h create mode 100644 sound/soc/codecs/pef2256-codec.c -- 2.39.2

4 20

Re: [PATCH 02/11] dt-bindings: serial: snps-dw-apb-uart: Relax dma-names order constraint
by Rob Herring 20 Mar '23

20 Mar '23

On Fri, Mar 17, 2023 at 12:21:41PM +0200, Cristian Ciocaltea via Alsa-devel wrote: > Date: Fri, 17 Mar 2023 12:21:41 +0200 > From: Cristian Ciocaltea <cristian.ciocaltea(a)collabora.com> > To: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>, Sudeep Holla > <sudeep.holla(a)arm.com>, Cristian Marussi <cristian.marussi(a)arm.com>, Rob > Herring <robh+dt(a)kernel.org>, Krzysztof Kozlowski > <krzysztof.kozlowski+dt(a)linaro.org>, Greg Kroah-Hartman > <gregkh(a)linuxfoundation.org>, Liam Girdwood <lgirdwood(a)gmail.com>, Mark > Brown <broonie(a)kernel.org>, Nicolas Frattaroli > <frattaroli.nicolas(a)gmail.com>, Heiko Stuebner <heiko(a)sntech.de>, Jaroslav > Kysela <perex(a)perex.cz>, Takashi Iwai <tiwai(a)suse.com>, Paul Walmsley > <paul.walmsley(a)sifive.com>, Palmer Dabbelt <palmer(a)dabbelt.com>, Albert Ou > <aou(a)eecs.berkeley.edu>, Daniel Drake <drake(a)endlessm.com>, Katsuhiro > Suzuki <katsuhiro(a)katsuster.net> > CC: linux-arm-kernel(a)lists.infradead.org, devicetree(a)vger.kernel.org, > linux-kernel(a)vger.kernel.org, linux-serial(a)vger.kernel.org, > alsa-devel(a)alsa-project.org, linux-rockchip(a)lists.infradead.org, > linux-riscv(a)lists.infradead.org, kernel(a)collabora.com > Subject: Re: [PATCH 02/11] dt-bindings: serial: snps-dw-apb-uart: Relax > dma-names order constraint > Message-ID: <8ae57fe3-56aa-7e50-3eaa-a12a40657baf(a)collabora.com> > User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 > Thunderbird/102.7.2 There is something strange going on with your mails as there are 2 copies in the archives with the 2nd one getting the header twice. It's coming from the alsa-devel list. > > On 3/17/23 10:31, Krzysztof Kozlowski wrote: > > On 15/03/2023 12:47, Cristian Ciocaltea wrote: > > > Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & > > > dma-names properties") documented dma-names property to handle Allwiner > > > D1 dtbs_check warnings, but relies on a strict rx->tx ordering, which is > > > the reverse of what a different board expects: > > > > > > rk3326-odroid-go2.dtb: serial@ff030000: dma-names:0: 'rx' was expected > > > > > > A quick and incomplete check shows the inconsistency is present in many > > > other DT files: > > > > Why not fixing the DTS? The properties should have fixed order. > > I was initially concerned about the risk of a potential ABI breakage, but I > think that's not really a problem since dma-names is not directly accessed > in the driver and DT Kernel API doesn't rely on a particular order. > > If there are no objections, I would switch the order in the binding to > tx->rx, since that's what most of the DTS use, and fix the remaining ones. > > > Best regards, > > Krzysztof > > Thanks, > Cristian

2 1

[PATCH] ALSA: usb-audio: Fix recursive locking on XRUN
by John Keeping 20 Mar '23

20 Mar '23

snd_usb_queue_pending_output_urbs() may be called from snd_pcm_ops::ack() which means the PCM stream is locked. For the normal case where the call back into the PCM core is via prepare_output_urb() the "_under_stream_lock" variant of snd_pcm_period_elapsed() is called, but when an error occurs and the stream is stopped as XRUN then snd_pcm_xrun() tries to recursively lock the stream which results in deadlock. Follow the example of snd_pcm_period_elapsed() by adding snd_pcm_xrun_under_stream_lock() and use this when the PCM substream lock is already held. Signed-off-by: John Keeping <john(a)metanate.com> --- include/sound/pcm.h | 1 + sound/core/pcm_native.c | 28 ++++++++++++++++++++++++---- sound/usb/endpoint.c | 18 +++++++++++------- 3 files changed, 36 insertions(+), 11 deletions(-) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 27040b472a4f..98551907453a 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -571,6 +571,7 @@ int snd_pcm_status64(struct snd_pcm_substream *substream, int snd_pcm_start(struct snd_pcm_substream *substream); int snd_pcm_stop(struct snd_pcm_substream *substream, snd_pcm_state_t status); int snd_pcm_drain_done(struct snd_pcm_substream *substream); +int snd_pcm_stop_xrun_under_stream_lock(struct snd_pcm_substream *substream); int snd_pcm_stop_xrun(struct snd_pcm_substream *substream); #ifdef CONFIG_PM int snd_pcm_suspend_all(struct snd_pcm *pcm); diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 331380c2438b..617f5dc74df0 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1559,24 +1559,44 @@ int snd_pcm_drain_done(struct snd_pcm_substream *substream) SNDRV_PCM_STATE_SETUP); } +/** + * snd_pcm_stop_xrun_under_stream_lock - stop the running stream as XRUN under the lock of + * the PCM substream. + * @substream: the PCM substream instance + * + * This stops the given running substream (and all linked substreams) as XRUN. + * This function assumes that the substream lock is already held. + * + * Return: Zero if successful, or a negative error core. + */ +int snd_pcm_stop_xrun_under_stream_lock(struct snd_pcm_substream *substream) +{ + if (substream->runtime && snd_pcm_running(substream)) + __snd_pcm_xrun(substream); + + return 0; +} + /** * snd_pcm_stop_xrun - stop the running streams as XRUN * @substream: the PCM substream instance * + * This function is similar to ``snd_pcm_stop_xrun_under_stream_lock()`` except that it + * acquires the substream lock itself. + * * This stops the given running substream (and all linked substreams) as XRUN. - * Unlike snd_pcm_stop(), this function takes the substream lock by itself. * * Return: Zero if successful, or a negative error code. */ int snd_pcm_stop_xrun(struct snd_pcm_substream *substream) { unsigned long flags; + int ret; snd_pcm_stream_lock_irqsave(substream, flags); - if (substream->runtime && snd_pcm_running(substream)) - __snd_pcm_xrun(substream); + ret = snd_pcm_stop_xrun_under_stream_lock(substream); snd_pcm_stream_unlock_irqrestore(substream, flags); - return 0; + return ret; } EXPORT_SYMBOL_GPL(snd_pcm_stop_xrun); diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 1e0af1179ca8..83a6b6d41374 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -400,13 +400,17 @@ static int prepare_inbound_urb(struct snd_usb_endpoint *ep, } /* notify an error as XRUN to the assigned PCM data substream */ -static void notify_xrun(struct snd_usb_endpoint *ep) +static void notify_xrun(struct snd_usb_endpoint *ep, bool in_stream_lock) { struct snd_usb_substream *data_subs; data_subs = READ_ONCE(ep->data_subs); - if (data_subs && data_subs->pcm_substream) - snd_pcm_stop_xrun(data_subs->pcm_substream); + if (data_subs && data_subs->pcm_substream) { + if (in_stream_lock) + snd_pcm_stop_xrun_under_stream_lock(data_subs->pcm_substream); + else + snd_pcm_stop_xrun(data_subs->pcm_substream); + } } static struct snd_usb_packet_info * @@ -498,7 +502,7 @@ void snd_usb_queue_pending_output_urbs(struct snd_usb_endpoint *ep, if (err == -EAGAIN) push_back_to_ready_list(ep, ctx); else - notify_xrun(ep); + notify_xrun(ep, in_stream_lock); return; } @@ -507,7 +511,7 @@ void snd_usb_queue_pending_output_urbs(struct snd_usb_endpoint *ep, usb_audio_err(ep->chip, "Unable to submit urb #%d: %d at %s\n", ctx->index, err, __func__); - notify_xrun(ep); + notify_xrun(ep, in_stream_lock); return; } @@ -574,7 +578,7 @@ static void snd_complete_urb(struct urb *urb) return; usb_audio_err(ep->chip, "cannot submit urb (err = %d)\n", err); - notify_xrun(ep); + notify_xrun(ep, false); exit_clear: clear_bit(ctx->index, &ep->active_mask); @@ -1762,7 +1766,7 @@ static void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, usb_audio_err(ep->chip, "next package FIFO overflow EP 0x%x\n", ep->ep_num); - notify_xrun(ep); + notify_xrun(ep, false); return; } -- 2.40.0

4 9

[PATCH] ALSA: hda/conexant: Partial revert of a quirk for Lenovo
by Takashi Iwai 20 Mar '23

20 Mar '23

The recent commit f83bb2592482 ("ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model") introduced a quirk for the device with 17aa:3977, but this caused a regression on another model (Lenovo Ideadpad U31) with the very same PCI SSID. And, through skimming over the net, it seems that this PCI SSID is used for multiple different models, so it's no good idea to apply the quirk with the SSID. Although we may take a different ID check (e.g. the codec SSID instead of the PCI SSID), unfortunately, the original patch author couldn't identify the hardware details any longer as the machine was returned, and we can't develop the further proper fix. In this patch, instead, we partially revert the change so that the quirk won't be applied as default for addressing the regression. Meanwhile, the quirk function itself is kept, and it's now made to be applicable via the explicit model=lenovo-20149 option. Fixes: f83bb2592482 ("ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model") Reported-by: Jetro Jormalainen <jje-lxkl(a)jetro.fi> Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20230308215009.4d3e58a6@mopti Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_conexant.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 75e1d00074b9..a889cccdd607 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -980,7 +980,10 @@ static const struct snd_pci_quirk cxt5066_fixups[] = { SND_PCI_QUIRK(0x17aa, 0x3905, "Lenovo G50-30", CXT_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x17aa, 0x390b, "Lenovo G50-80", CXT_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC), - SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_PINCFG_LENOVO_NOTEBOOK), + /* NOTE: we'd need to extend the quirk for 17aa:3977 as the same + * PCI SSID is used on multiple Lenovo models + */ + SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo G50-70", CXT_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC), SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", CXT_FIXUP_THINKPAD_ACPI), @@ -1003,6 +1006,7 @@ static const struct hda_model_fixup cxt5066_fixup_models[] = { { .id = CXT_FIXUP_MUTE_LED_GPIO, .name = "mute-led-gpio" }, { .id = CXT_FIXUP_HP_ZBOOK_MUTE_LED, .name = "hp-zbook-mute-led" }, { .id = CXT_FIXUP_HP_MIC_NO_PRESENCE, .name = "hp-mic-fix" }, + { .id = CXT_PINCFG_LENOVO_NOTEBOOK, .name = "lenovo-20149" }, {} }; -- 2.35.3

1 0

[PATCH] ALSA: ymfpci: remove unused snd_ymfpci_readb function
by Tom Rix 20 Mar '23

20 Mar '23

clang with W=1 reports sound/pci/ymfpci/ymfpci_main.c:34:18: error: unused function 'snd_ymfpci_readb' [-Werror,-Wunused-function] static inline u8 snd_ymfpci_readb(struct snd_ymfpci *chip, u32 offset) ^ This static function is not used, so remove it. Signed-off-by: Tom Rix <trix(a)redhat.com> --- sound/pci/ymfpci/ymfpci_main.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c index c80114c0ad7b..2858736ed20a 100644 --- a/sound/pci/ymfpci/ymfpci_main.c +++ b/sound/pci/ymfpci/ymfpci_main.c @@ -31,11 +31,6 @@ static void snd_ymfpci_irq_wait(struct snd_ymfpci *chip); -static inline u8 snd_ymfpci_readb(struct snd_ymfpci *chip, u32 offset) -{ - return readb(chip->reg_area_virt + offset); -} - static inline void snd_ymfpci_writeb(struct snd_ymfpci *chip, u32 offset, u8 val) { writeb(val, chip->reg_area_virt + offset); -- 2.27.0

3 3

Using mili/micro/nanoseconds in split files
by GitHub issues - opened 20 Mar '23

20 Mar '23

alsa-project/alsa-tools issue #15 was opened from kfilipan: This is more of a feature request rather than an issue. When using `arecord` with `--max-file-time` and `--use-strftime`, one cannot get nanoseconds in the file name. This is however available in the e.g. `date` command `date +"%Y-%m-%d_%H-%M-%S.%N"` (`%N` gives nanoseconds). This would be useful for testing sound card recording time delays because having only seconds is not precise enough, e.g. it could take days or weeks for even slightly better sound cards to experience a second of delay. Thank you! Issue URL : https://github.com/alsa-project/alsa-tools/issues/15 Repository URL: https://github.com/alsa-project/alsa-tools

1 0

[PATCH v1] ALSA:ac97: Remove redundant driver match function
by Lizhe 20 Mar '23

20 Mar '23

If there is no driver match function, the driver core assumes that each candidate pair (driver, device) matches, see driver_match_device() Drop the bus's match function that always returned 1 and so implements the same behaviour as when there is no match function. Signed-off-by: Lizhe <sensor1010(a)163.com> --- sound/ac97_bus.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/sound/ac97_bus.c b/sound/ac97_bus.c index b4685c53ff11..c7aee8c42c55 100644 --- a/sound/ac97_bus.c +++ b/sound/ac97_bus.c @@ -75,19 +75,8 @@ int snd_ac97_reset(struct snd_ac97 *ac97, bool try_warm, unsigned int id, } EXPORT_SYMBOL_GPL(snd_ac97_reset); -/* - * Let drivers decide whether they want to support given codec from their - * probe method. Drivers have direct access to the struct snd_ac97 - * structure and may decide based on the id field amongst other things. - */ -static int ac97_bus_match(struct device *dev, struct device_driver *drv) -{ - return 1; -} - struct bus_type ac97_bus_type = { .name = "ac97", - .match = ac97_bus_match, }; static int __init ac97_bus_init(void) -- 2.34.1

2 3

USB-Audio: ALC4080, add MSI MPG Z590 Gaming Force
by GitHub pull_request - opened 20 Mar '23

20 Mar '23

alsa-project/alsa-ucm-conf pull request #292 was opened from Paris17: USB ID: 0db0:8af7 Adds support for the MSI MPG Z590 GAMING FORCE motherboard front & back 3.5mm jacks. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/292 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/292.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] Add M3402RA to the list of quirks
by Enrico Belleri 20 Mar '23

20 Mar '23

Fix builtin microphone on ASUS Vivobook S 14 OLED 2022 (M3402RA) Same issue with this model as apparently with other Rembrandt laptops: https://bugzilla.kernel.org/show_bug.cgi?id=216270 Signed-off-by: Enrico Belleri <idesmi(a)protonmail.com> --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 4a69ce702..80dfb6036 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -213,6 +213,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "M5402RA"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "M3402RA"), + } + }, { .driver_data = &acp6x_card, .matches = { -- 2.40.0

1 0

Re: [PATCH] kernel/drivers: Remove redundant driver match function
by Uwe Kleine-König 19 Mar '23

19 Mar '23

Hello, On Thu, May 05, 2022 at 09:59:52PM -0700, lizhe wrote: > If there is no driver match function, the driver core assumes that each > candidate pair (driver, device) matches, see driver_match_device(). I wonder who is supposed to apply this patch. Either it should be split by file and go in via the respective maintainers, or it goes in via Greg's tree? I added Greg to To: for him to chime in. Best regards Uwe > Signed-off-by: lizhe <sensor1010(a)163.com> > --- > drivers/mfd/mcp-core.c | 6 ------ > drivers/nubus/bus.c | 6 ------ > drivers/s390/crypto/vfio_ap_drv.c | 6 ------ > drivers/scsi/scsi_debug.c | 7 ------- > drivers/target/loopback/tcm_loop.c | 7 ------- > drivers/w1/w1.c | 6 ------ > sound/ac97_bus.c | 11 ----------- > 7 files changed, 49 deletions(-) > > diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c > index 2fa592c37c6f..281a9369f2b3 100644 > --- a/drivers/mfd/mcp-core.c > +++ b/drivers/mfd/mcp-core.c > @@ -20,11 +20,6 @@ > #define to_mcp(d) container_of(d, struct mcp, attached_device) > #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) > > -static int mcp_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static int mcp_bus_probe(struct device *dev) > { > struct mcp *mcp = to_mcp(dev); > @@ -43,7 +38,6 @@ static void mcp_bus_remove(struct device *dev) > > static struct bus_type mcp_bus_type = { > .name = "mcp", > - .match = mcp_bus_match, > .probe = mcp_bus_probe, > .remove = mcp_bus_remove, > }; > diff --git a/drivers/nubus/bus.c b/drivers/nubus/bus.c > index 17fad660032c..72921e4f35f6 100644 > --- a/drivers/nubus/bus.c > +++ b/drivers/nubus/bus.c > @@ -14,11 +14,6 @@ > #define to_nubus_board(d) container_of(d, struct nubus_board, dev) > #define to_nubus_driver(d) container_of(d, struct nubus_driver, driver) > > -static int nubus_bus_match(struct device *dev, struct device_driver *driver) > -{ > - return 1; > -} > - > static int nubus_device_probe(struct device *dev) > { > struct nubus_driver *ndrv = to_nubus_driver(dev->driver); > @@ -39,7 +34,6 @@ static void nubus_device_remove(struct device *dev) > > struct bus_type nubus_bus_type = { > .name = "nubus", > - .match = nubus_bus_match, > .probe = nubus_device_probe, > .remove = nubus_device_remove, > }; > diff --git a/drivers/s390/crypto/vfio_ap_drv.c b/drivers/s390/crypto/vfio_ap_drv.c > index 29ebd54f8919..0a662c451f2a 100644 > --- a/drivers/s390/crypto/vfio_ap_drv.c > +++ b/drivers/s390/crypto/vfio_ap_drv.c > @@ -172,14 +172,8 @@ static void vfio_ap_matrix_dev_release(struct device *dev) > kfree(matrix_dev); > } > > -static int matrix_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static struct bus_type matrix_bus = { > .name = "matrix", > - .match = &matrix_bus_match, > }; > > static struct device_driver matrix_driver = { > diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c > index 592a290e6cfa..8107489b36e8 100644 > --- a/drivers/scsi/scsi_debug.c > +++ b/drivers/scsi/scsi_debug.c > @@ -7844,15 +7844,8 @@ static void sdebug_driver_remove(struct device *dev) > scsi_host_put(sdbg_host->shost); > } > > -static int pseudo_lld_bus_match(struct device *dev, > - struct device_driver *dev_driver) > -{ > - return 1; > -} > - > static struct bus_type pseudo_lld_bus = { > .name = "pseudo", > - .match = pseudo_lld_bus_match, > .probe = sdebug_driver_probe, > .remove = sdebug_driver_remove, > .drv_groups = sdebug_drv_groups, > diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c > index 4407b56aa6d1..eeb63deff94f 100644 > --- a/drivers/target/loopback/tcm_loop.c > +++ b/drivers/target/loopback/tcm_loop.c > @@ -83,15 +83,8 @@ static int tcm_loop_show_info(struct seq_file *m, struct Scsi_Host *host) > static int tcm_loop_driver_probe(struct device *); > static void tcm_loop_driver_remove(struct device *); > > -static int pseudo_lld_bus_match(struct device *dev, > - struct device_driver *dev_driver) > -{ > - return 1; > -} > - > static struct bus_type tcm_loop_lld_bus = { > .name = "tcm_loop_bus", > - .match = pseudo_lld_bus_match, > .probe = tcm_loop_driver_probe, > .remove = tcm_loop_driver_remove, > }; > diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c > index f2ae2e563dc5..a6ecfa1b3417 100644 > --- a/drivers/w1/w1.c > +++ b/drivers/w1/w1.c > @@ -58,11 +58,6 @@ MODULE_PARM_DESC(slave_ttl, > DEFINE_MUTEX(w1_mlock); > LIST_HEAD(w1_masters); > > -static int w1_master_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > static int w1_master_probe(struct device *dev) > { > return -ENODEV; > @@ -174,7 +169,6 @@ static int w1_uevent(struct device *dev, struct kobj_uevent_env *env); > > static struct bus_type w1_bus_type = { > .name = "w1", > - .match = w1_master_match, > .uevent = w1_uevent, > }; > > diff --git a/sound/ac97_bus.c b/sound/ac97_bus.c > index b4685c53ff11..c7aee8c42c55 100644 > --- a/sound/ac97_bus.c > +++ b/sound/ac97_bus.c > @@ -75,19 +75,8 @@ int snd_ac97_reset(struct snd_ac97 *ac97, bool try_warm, unsigned int id, > } > EXPORT_SYMBOL_GPL(snd_ac97_reset); > > -/* > - * Let drivers decide whether they want to support given codec from their > - * probe method. Drivers have direct access to the struct snd_ac97 > - * structure and may decide based on the id field amongst other things. > - */ > -static int ac97_bus_match(struct device *dev, struct device_driver *drv) > -{ > - return 1; > -} > - > struct bus_type ac97_bus_type = { > .name = "ac97", > - .match = ac97_bus_match, > }; > > static int __init ac97_bus_init(void) > -- > 2.25.1 > > -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |

3 2

Re:Re: [PATCH v5] serial: linflexuart: remove redundant uart type assignment
by lizhe 19 Mar '23

19 Mar '23

HI : My name is Li zhe. i am chinese At 2023-01-05 14:32:07, "Jiri Slaby" <jirislaby(a)kernel.org> wrote: >On 04. 01. 23, 17:43, LIZHE wrote: >> in linflex_config_port() the member variable type will be >> assigned again. see linflex_connfig_port() > >Please use capitals when you start a sentence. And periods at the ends >of them. > >> Signed-off-by: LIZHE <sensor1010(a)163.com> > >No, Lizhe was fine (or use your Chinese name. We support unicode so that >would be fine too, as Greg stated). > >But you didn't include changelog to your previous v1-v4 patches; as >stated by Ilpo. > >> Link: https://lore.kernel.org/all/20230103170948.3777-1-sensor1010@163.com/ >> --- >> drivers/tty/serial/fsl_linflexuart.c | 1 - >> 1 file changed, 1 deletion(-) >> >> diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c >> index 6fc21b6684e6..34400cc6ac7f 100644 >> --- a/drivers/tty/serial/fsl_linflexuart.c >> +++ b/drivers/tty/serial/fsl_linflexuart.c >> @@ -837,7 +837,6 @@ static int linflex_probe(struct platform_device *pdev) >> return PTR_ERR(sport->membase); >> >> sport->dev = &pdev->dev; >> - sport->type = PORT_LINFLEXUART; >> sport->iotype = UPIO_MEM; >> sport->irq = platform_get_irq(pdev, 0); >> sport->ops = &linflex_pops; > >-- >js >suse labs

1 0

[PATCH] ALSA: drivers: Remove the unused variable portman_read_data
by Jiapeng Chong 19 Mar '23

19 Mar '23

Variable portman_read_data is not effectively used, so delete it. sound/drivers/portman2x4.c:195:18: warning: unused function 'portman_read_data'. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4557 Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> --- sound/drivers/portman2x4.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/drivers/portman2x4.c b/sound/drivers/portman2x4.c index 52a656735365..41b46f9ae731 100644 --- a/sound/drivers/portman2x4.c +++ b/sound/drivers/portman2x4.c @@ -192,11 +192,6 @@ static inline u8 portman_read_status(struct portman *pm) return parport_read_status(pm->pardev->port); } -static inline u8 portman_read_data(struct portman *pm) -{ - return parport_read_data(pm->pardev->port); -} - static inline void portman_write_data(struct portman *pm, u8 value) { parport_write_data(pm->pardev->port, value); -- 2.20.1.7.g153144c

2 2

[PATCH] ALSA: portman2x4: remove unused portman_read_command,data functions
by Tom Rix 19 Mar '23

19 Mar '23

clang with W=1 reports sound/drivers/portman2x4.c:185:18: error: unused function 'portman_read_command' [-Werror,-Wunused-function] static inline u8 portman_read_command(struct portman *pm) ^ sound/drivers/portman2x4.c:195:18: error: unused function 'portman_read_data' [-Werror,-Wunused-function] static inline u8 portman_read_data(struct portman *pm) ^ These static functions are not used, so remove them. Signed-off-by: Tom Rix <trix(a)redhat.com> --- sound/drivers/portman2x4.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/sound/drivers/portman2x4.c b/sound/drivers/portman2x4.c index 52a656735365..4cdf56a0eb65 100644 --- a/sound/drivers/portman2x4.c +++ b/sound/drivers/portman2x4.c @@ -182,21 +182,11 @@ static inline void portman_write_command(struct portman *pm, u8 value) parport_write_control(pm->pardev->port, value); } -static inline u8 portman_read_command(struct portman *pm) -{ - return parport_read_control(pm->pardev->port); -} - static inline u8 portman_read_status(struct portman *pm) { return parport_read_status(pm->pardev->port); } -static inline u8 portman_read_data(struct portman *pm) -{ - return parport_read_data(pm->pardev->port); -} - static inline void portman_write_data(struct portman *pm, u8 value) { parport_write_data(pm->pardev->port, value); -- 2.27.0

2 1

[PATCH] ALSA: hda/realtek: Add quirks for some Clevo laptops
by Tim Crawford 19 Mar '23

19 Mar '23

Add the audio quirk for some of Clevo's latest RPL laptops: - NP50RNJS (ALC256) - NP70SNE (ALC256) - PD50SNE (ALC1220) - PE60RNE (ALC1220) Co-authored-by: Jeremy Soller <jeremy(a)system76.com> Signed-off-by: Tim Crawford <tcrawford(a)system76.com> --- sound/pci/hda/patch_realtek.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3c629f4ae080..d7beff1aed2a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2631,6 +2631,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x65e5, "Clevo PC50D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x65f1, "Clevo PC50HS", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x65f5, "Clevo PD50PN[NRT]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), + SND_PCI_QUIRK(0x1558, 0x66a2, "Clevo PE60RNE", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67d1, "Clevo PB71[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS), @@ -2651,6 +2652,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x96e1, "Clevo P960[ER][CDFN]-K", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1558, 0x97e1, "Clevo P970[ER][CDFN]", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1558, 0x97e2, "Clevo P970RC-M", ALC1220_FIXUP_CLEVO_P950), + SND_PCI_QUIRK(0x1558, 0xd502, "Clevo PD50SNE", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", ALC882_FIXUP_LENOVO_Y530), @@ -9573,6 +9575,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x5101, "Clevo S510WU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x5157, "Clevo W517GU1", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x51a1, "Clevo NS50MU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x5630, "Clevo NP50RNJS", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x70a1, "Clevo NB70T[HJK]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x70b3, "Clevo NK70SB", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x70f2, "Clevo NH79EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), @@ -9607,6 +9610,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x971d, "Clevo N970T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0xa500, "Clevo NL5[03]RU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0xa600, "Clevo NL50NU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0xa671, "Clevo NP70SN[CDE]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0xb018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0xb019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0xb022, "Clevo NH77D[DC][QW]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), -- 2.39.2

2 1

[PATCH 0/6] ASoC: SOF: ipc4-topology: Add support for effect widget
by Peter Ujfalusi 17 Mar '23

17 Mar '23

Hi, The following series will add support for IPC4 process modules as effect widgets. We can cover wide range of modules as a generic process or effect module, the patches will lay down the fundation and the generic code to handle them. At initialization time process modules can receive additional information on top of the base_cfg, which is defined as base_cfg_ext, an extension for the base configuration struct. Other parameters or blobs for these modules are sent as a separate message via LARGE_CONFIG message, which is handled by the existing bytes control support. Regards Peter --- Chao Song (2): ASoC: SOF: ipc4-topology: add base module config extension structure ASoC: SOF: ipc4-topology: set copier output format for process module Libin Yang (2): ASoC: SOF: ipc4-topology: add effect widget support ASoC: SOF: ipc4-topology: update pipeline_params in process prepare Peter Ujfalusi (1): ASoC: SOF: ipc4-topology: Move the kcontrol module_id update to helper Ranjani Sridharan (1): ASoC: SOF: ipc4-topology: Add support for base config extension sound/soc/sof/ipc4-topology.c | 367 ++++++++++++++++++++++++++++++++-- sound/soc/sof/ipc4-topology.h | 45 +++++ 2 files changed, 396 insertions(+), 16 deletions(-) -- 2.39.2

2 7

Re: [PATCH v2 2/9] ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8550 RX macro
by mike jenkins 17 Mar '23

17 Mar '23

Hello Sent from my T-Mobile 4G LTE Device Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ From: Rob Herring <robh(a)kernel.org> Sent: Friday, March 17, 2023 9:37:03 AM To: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Cc: devicetree(a)vger.kernel.org <devicetree(a)vger.kernel.org>; Takashi Iwai <tiwai(a)suse.com>; Konrad Dybcio <konrad.dybcio(a)linaro.org>; Banajit Goswami <bgoswami(a)quicinc.com>; linux-arm-msm(a)vger.kernel.org <linux-arm-msm(a)vger.kernel.org>; Andy Gross <agross(a)kernel.org>; Liam Girdwood <lgirdwood(a)gmail.com>; Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org>; Mark Brown <broonie(a)kernel.org>; alsa-devel(a)alsa-project.org <alsa-devel(a)alsa-project.org>; Bjorn Andersson <andersson(a)kernel.org>; linux-kernel(a)vger.kernel.org <linux-kernel(a)vger.kernel.org>; Jaroslav Kysela <perex(a)perex.cz>; Krzysztof Kozlowski <krzysztof.kozlowski+dt(a)linaro.org>; Rob Herring <robh+dt(a)kernel.org> Subject: Re: [PATCH v2 2/9] ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8550 RX macro On Mon, 13 Mar 2023 08:54:38 +0100, Krzysztof Kozlowski wrote: > Add the RX macro codec on Qualcomm SM8550, which comes without NPL clock > exposed. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> > --- > .../bindings/sound/qcom,lpass-rx-macro.yaml | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > Reviewed-by: Rob Herring <robh(a)kernel.org>

1 0

[PATCH] ASoC: dt-bindings: renesas: rsnd: correct comments syntax
by Krzysztof Kozlowski 17 Mar '23

17 Mar '23

yamllint expect space after '#' comment mark: renesas,rsnd.yaml:282:4: [error] missing starting space in comment (comments) Fixes: 7f8b5b24bbb4 ("ASoC: dt-bindings: renesas,rsnd.yaml: add R-Car Gen4 support") Reported-by: Rafał Miłecki <zajec5(a)gmail.com> Link: https://lore.kernel.org/all/b2810924-169d-0bad-8f20-6ec2e683d170@gmail.com/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 676dfe7a7f17..68a93b290433 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -279,9 +279,9 @@ required: allOf: - $ref: dai-common.yaml# - #-------------------- + # -------------------- # reg/reg-names - #-------------------- + # -------------------- # for Gen1 - if: properties: @@ -336,9 +336,9 @@ allOf: - ssi - sdmc - #-------------------- + # -------------------- # clock-names - #-------------------- + # -------------------- - if: properties: compatible: -- 2.34.1

2 1

[PATCH] ASoC: SOF: ipc4-topology: Initialize in_format to NULL in sof_ipc4_get_audio_fmt
by Peter Ujfalusi 17 Mar '23

17 Mar '23

If the available_fmt->num_input_formats is 0 and there is a failure during the output format parsing then a kfree() would be called on the uninitialized in_format pointer. By initializing the in_format to NULL, this error can be avoided. Fixes: 7ab6b1e8302c ("ASoC: SOF: ipc4-topology: Modify the type of available input/output formats") Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> --- sound/soc/sof/ipc4-topology.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index e7b3bdc95dd7..2a2c4cda63fd 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -179,7 +179,8 @@ static int sof_ipc4_get_audio_fmt(struct snd_soc_component *scomp, struct sof_ipc4_available_audio_format *available_fmt, struct sof_ipc4_base_module_cfg *module_base_cfg) { - struct sof_ipc4_pin_format *out_format, *in_format; + struct sof_ipc4_pin_format *in_format = NULL; + struct sof_ipc4_pin_format *out_format; int ret; ret = sof_update_ipc_object(scomp, available_fmt, -- 2.40.0

2 1

[PATCH] ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
by gbrohammer＠outlook.com 17 Mar '23

17 Mar '23

From: Ge-org Brohammer <gbrohammer(a)outlook.com> This model requires an additional detection quirk to enable the internal microphone. Tried to use git send-email this time. Signed-off-by: Ge-org Brohammer <gbrohammer(a)outlook.com> --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 4a69ce702360..0acdf0156f07 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -269,6 +269,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_BOARD_NAME, "8A43"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "HP"), + DMI_MATCH(DMI_BOARD_NAME, "8A22"), + } + }, {} }; -- 2.37.2

2 1

[PATCH v2] ASoC: dt-bindings: adi,adau17x1: fix indentation and example
by Krzysztof Kozlowski 17 Mar '23

17 Mar '23

Fix errors in binding indentation and example: adi,adau17x1.yaml:8:2: [warning] wrong indentation: expected 2 but found 1 (indentation) adi,adau17x1.example.dts:29.3-30.1 syntax error Fixes: 87771c940258 ("ASoC: dt-bindings: adi,adau17x1: Convert to DT schema") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Changes since v1: 1. Fix typo in subject 2. Add fixes tag - commit SHA from ASoC next branch --- Documentation/devicetree/bindings/sound/adi,adau17x1.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml index 45955f38b6fd..8ef1e7f6ec91 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml @@ -4,8 +4,7 @@ $id: http://devicetree.org/schemas/sound/adi,adau17x1.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: - Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 Codec +title: Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 Codec maintainers: - Lars-Peter Clausen <lars(a)metafoo.de> @@ -50,3 +49,4 @@ examples: clock-names = "mclk"; clocks = <&audio_clock>; }; + }; -- 2.34.1

2 1

[PATCH 0/2] ASoC: SOF: ipc4: upport multiple configs for BE DAIs
by Peter Ujfalusi 17 Mar '23

17 Mar '23

Hi, Backend DAIs may support multiple audio formats. Modify pipeline setup to select a suitable configuration based on topology and frontend DAI runtime configuration. The prime use case is BT offload support where we need the abality to select different configuration on the BE side. Regards, Peter -- Kai Vehmanen (2): ASoC: SOF: ipc4-pcm: support multiple configs for BE DAIs ASoC: SOF: ipc4-topology: use common helper function in copier prepare sound/soc/sof/ipc4-pcm.c | 66 ++++++++++++++++++++++--- sound/soc/sof/ipc4-topology.c | 92 ++++++++++++++++++++++++++--------- 2 files changed, 128 insertions(+), 30 deletions(-) -- 2.39.2

2 3

[PATCH] ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
by Ge-org Brohammer 17 Mar '23

17 Mar '23

This model requires an additional detection quirk to enable the internal microphone. Signed-off-by: Ge-org Brohammer <gbrohammer(a)outlook.com> --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 4a69ce702360..0acdf0156f07 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -269,6 +269,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_BOARD_NAME, "8A43"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "HP"), + DMI_MATCH(DMI_BOARD_NAME, "8A22"), + } + }, {} }; -- 2.37.2

2 2

[PATCH V6 0/8] Add SoundWire support for AMD platforms
by Vijendar Mukunda 17 Mar '23

17 Mar '23

ACP IP(v6.x) block has two SoundWire manager instance support. This patchset adds support for AMD SoundWire manager driver. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> changes since v5: - replace loops logic with read_poll_timeout() throughout the code. changes since v4: - fix nit-picks in the code. - update naming convention for control word and response buffer vairables. - drop pm_suspend check in prepare callback. - use return statement instead of returning ret variable. changes since v3: - add usleep_range() in command/response implementation. - add usleep_range() in clock stop sequence. - modify usleep_range() values throughout the code. - remove unncessary debug statement from code. - update comment in probe() call. - fix timeout condition checks in the code. - drop "ret" variable in amd_disable_sdw_manager(). changes since v2: - Remove useless variable initializations. - Add helper function to interpret peripheral status. - Move runtime pm sequence to probe_work workqueue. - Use string "SoundWire" instead of "soundwire" in code. - Update comments in interrupt handler and probe sequence. - Rename "sdw_lock" as "acp_sdw_lock". - Remove __func__ from dev_dbg statements. changes since v1: - Drop asoc tree based patches. will send asoc patches as a separate series. - Fixed double space errors. - Use dev instead of pci->dev. - Use SoundWire manager terminology. - Remove amd_sdw_compute_slave_ports() function and use exported sdw_compute_slave_ports() function. - Remove unused variable "num_ports" from amd_manager structure. - Drop startup and shutdown dai callbacks. - Drop reset_page_addr callback. - Use relative address offset to program SoundWire manager registers throughout the code. - Separate wake enable interrupt handling from slave status handling logic. - Use acp_mmio to program ACP common registers. - Use dai_runtime_array implementation in dai_ops. - Refactor port_ops callbacks. - Add comments in port_ops callbacks. - Add retry count logic in irq thread to address faulty case. - Add helper function to interpret command response. - Add generic bandwidth allocation dependency in Kconfig options. - Add comments for AMD SoundWire power modes. - Add missing timeout check in amd_init_sdw_manager callback. - Declare frameshape parameters in probe call. - Handle error case in clock stop sequence. - Add comments in pm_prepare and pm_ops callbacks. Vijendar Mukunda (8): soundwire: export sdw_compute_slave_ports() function soundwire: amd: Add support for AMD Manager driver soundwire: amd: register SoundWire manager dai ops soundwire: amd: enable build for AMD SoundWire manager driver soundwire: amd: add SoundWire manager interrupt handling soundwire: amd: add runtime pm ops for AMD SoundWire manager driver soundwire: amd: handle SoundWire wake enable interrupt soundwire: amd: add pm_prepare callback and pm ops support drivers/soundwire/Kconfig | 10 + drivers/soundwire/Makefile | 4 + drivers/soundwire/amd_manager.c | 1245 +++++++++++++++++ drivers/soundwire/amd_manager.h | 274 ++++ drivers/soundwire/bus.h | 9 + .../soundwire/generic_bandwidth_allocation.c | 12 +- include/linux/soundwire/sdw_amd.h | 109 ++ 7 files changed, 1654 insertions(+), 9 deletions(-) create mode 100644 drivers/soundwire/amd_manager.c create mode 100644 drivers/soundwire/amd_manager.h create mode 100644 include/linux/soundwire/sdw_amd.h -- 2.34.1

4 30

[PATCH 1/2] soundwire: bus: Remove now outdated comments on no_pm IO
by Charles Keepax 17 Mar '23

17 Mar '23

Things have moved more towards end drivers using the no_pm versions of the IO functions. See commits: commit 167790abb90f ("soundwire: export sdw_write/read_no_pm functions") commit 62dc9f3f2fd0 ("soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions") As such this comment is now misleading, so remove it. Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- drivers/soundwire/bus.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index b6aca59c31300..3c67266f94834 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -384,9 +384,6 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave, /* * Read/Write IO functions. - * no_pm versions can only be called by the bus, e.g. while enumerating or - * handling suspend-resume sequences. - * all clients need to use the pm versions */ int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) -- 2.30.2

3 6

[PATCH] soundwire: stream: uniquify dev_err() logs
by Bard Liao 17 Mar '23

17 Mar '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> There are a couple of duplicate logs which makes harder than needed to follow the error flows. Add __func__ or make the log unique. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- drivers/soundwire/stream.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 2e39587ed1de..dd09855caac9 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1389,7 +1389,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream, ret = do_bank_switch(stream); if (ret < 0) { - dev_err(bus->dev, "Bank switch failed: %d\n", ret); + pr_err("%s: do_bank_switch failed: %d\n", __func__, ret); goto restore_params; } @@ -1477,7 +1477,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream) /* Program params */ ret = sdw_program_params(bus, false); if (ret < 0) { - dev_err(bus->dev, "Program params failed: %d\n", ret); + dev_err(bus->dev, "%s: Program params failed: %d\n", __func__, ret); return ret; } @@ -1497,7 +1497,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream) ret = do_bank_switch(stream); if (ret < 0) { - dev_err(bus->dev, "Bank switch failed: %d\n", ret); + pr_err("%s: do_bank_switch failed: %d\n", __func__, ret); return ret; } @@ -1567,14 +1567,14 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream) /* Program params */ ret = sdw_program_params(bus, false); if (ret < 0) { - dev_err(bus->dev, "Program params failed: %d\n", ret); + dev_err(bus->dev, "%s: Program params failed: %d\n", __func__, ret); return ret; } } ret = do_bank_switch(stream); if (ret < 0) { - pr_err("Bank switch failed: %d\n", ret); + pr_err("%s: do_bank_switch failed: %d\n", __func__, ret); return ret; } @@ -1664,7 +1664,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream) /* Program params */ ret = sdw_program_params(bus, false); if (ret < 0) { - dev_err(bus->dev, "Program params failed: %d\n", ret); + dev_err(bus->dev, "%s: Program params failed: %d\n", __func__, ret); return ret; } } @@ -1893,7 +1893,8 @@ int sdw_stream_add_master(struct sdw_bus *bus, m_rt = sdw_master_rt_alloc(bus, stream); if (!m_rt) { - dev_err(bus->dev, "Master runtime alloc failed for stream:%s\n", stream->name); + dev_err(bus->dev, "%s: Master runtime alloc failed for stream:%s\n", + __func__, stream->name); ret = -ENOMEM; goto unlock; } @@ -2012,7 +2013,8 @@ int sdw_stream_add_slave(struct sdw_slave *slave, */ m_rt = sdw_master_rt_alloc(slave->bus, stream); if (!m_rt) { - dev_err(&slave->dev, "Master runtime alloc failed for stream:%s\n", stream->name); + dev_err(&slave->dev, "%s: Master runtime alloc failed for stream:%s\n", + __func__, stream->name); ret = -ENOMEM; goto unlock; } -- 2.25.1

3 3

Re: [PATCH v2 8/8] ASoC: cs35l56: Add driver for Cirrus Logic CS35L56
by kernel test robot 17 Mar '23

17 Mar '23

Hi Richard, Thank you for the patch! Yet something to improve: [auto build test ERROR on broonie-sound/for-next] [also build test ERROR on linus/master v6.3-rc2 next-20230316] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Richard-Fitzgerald-via-Alsa-… base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next patch link: https://lore.kernel.org/r/167872265923.26.336497278776737619%40mailman-core… patch subject: [PATCH v2 8/8] ASoC: cs35l56: Add driver for Cirrus Logic CS35L56 config: s390-randconfig-r044-20230313 (https://download.01.org/0day-ci/archive/20230317/202303170422.ZYpOtc4P-lkp@…) compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project 67409911353323ca5edf2049ef0df54132fa1ca7) reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # install s390 cross compiling tool for clang build # apt-get install binutils-s390x-linux-gnu # https://github.com/intel-lab-lkp/linux/commit/5856c94d659f9c9963f5c37762cf2… git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Richard-Fitzgerald-via-Alsa-devel/ASoC-wm_adsp-Use-no_core_startstop-to-prevent-creating-preload-control/20230313-235605 git checkout 5856c94d659f9c9963f5c37762cf201e1f1765e9 # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=s390 olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=s390 SHELL=/bin/bash If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202303170422.ZYpOtc4P-lkp@intel.com/ All errors (new ones prefixed by >>): s390x-linux-ld: sound/soc/codecs/cs35l56.o: in function `cs35l56_dsp_work': >> sound/soc/codecs/cs35l56.c:887: undefined reference to `sdw_write_no_pm' >> s390x-linux-ld: sound/soc/codecs/cs35l56.c:888: undefined reference to `sdw_read_no_pm' >> s390x-linux-ld: sound/soc/codecs/cs35l56.c:889: undefined reference to `sdw_write_no_pm' s390x-linux-ld: sound/soc/codecs/cs35l56.c:953: undefined reference to `sdw_write_no_pm' s390x-linux-ld: sound/soc/codecs/cs35l56.o: in function `cs35l56_sdw_dai_hw_params': >> sound/soc/codecs/cs35l56.c:710: undefined reference to `sdw_stream_add_slave' s390x-linux-ld: sound/soc/codecs/cs35l56.o: in function `cs35l56_sdw_dai_hw_free': >> sound/soc/codecs/cs35l56.c:729: undefined reference to `sdw_stream_remove_slave' Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for SERIAL_MULTI_INSTANTIATE Depends on [n]: X86_PLATFORM_DEVICES [=n] && I2C [=y] && SPI [=y] && ACPI Selected by [y]: - SND_SOC_CS35L56_I2C [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] - SND_SOC_CS35L56_SPI [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SPI_MASTER [=y] vim +887 sound/soc/codecs/cs35l56.c 668 669 static int cs35l56_sdw_dai_hw_params(struct snd_pcm_substream *substream, 670 struct snd_pcm_hw_params *params, 671 struct snd_soc_dai *dai) 672 { 673 struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(dai->component); 674 struct sdw_stream_runtime *sdw_stream = snd_soc_dai_get_dma_data(dai, substream); 675 struct sdw_stream_config sconfig; 676 struct sdw_port_config pconfig; 677 int ret; 678 679 dev_dbg(cs35l56->dev, "%s: rate %d\n", __func__, params_rate(params)); 680 681 if (!cs35l56->init_done) 682 return -ENODEV; 683 684 if (!sdw_stream) 685 return -EINVAL; 686 687 memset(&sconfig, 0, sizeof(sconfig)); 688 memset(&pconfig, 0, sizeof(pconfig)); 689 690 sconfig.frame_rate = params_rate(params); 691 sconfig.bps = snd_pcm_format_width(params_format(params)); 692 693 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { 694 sconfig.direction = SDW_DATA_DIR_RX; 695 pconfig.num = CS35L56_SDW1_PLAYBACK_PORT; 696 pconfig.ch_mask = cs35l56->rx_mask; 697 } else { 698 sconfig.direction = SDW_DATA_DIR_TX; 699 pconfig.num = CS35L56_SDW1_CAPTURE_PORT; 700 pconfig.ch_mask = cs35l56->tx_mask; 701 } 702 703 if (pconfig.ch_mask == 0) { 704 sconfig.ch_count = params_channels(params); 705 pconfig.ch_mask = GENMASK(sconfig.ch_count - 1, 0); 706 } else { 707 sconfig.ch_count = hweight32(pconfig.ch_mask); 708 } 709 > 710 ret = sdw_stream_add_slave(cs35l56->sdw_peripheral, &sconfig, &pconfig, 711 1, sdw_stream); 712 if (ret) { 713 dev_err(dai->dev, "Failed to add sdw stream: %d\n", ret); 714 return ret; 715 } 716 717 return 0; 718 } 719 720 static int cs35l56_sdw_dai_hw_free(struct snd_pcm_substream *substream, 721 struct snd_soc_dai *dai) 722 { 723 struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(dai->component); 724 struct sdw_stream_runtime *sdw_stream = snd_soc_dai_get_dma_data(dai, substream); 725 726 if (!cs35l56->sdw_peripheral) 727 return -EINVAL; 728 > 729 sdw_stream_remove_slave(cs35l56->sdw_peripheral, sdw_stream); 730 731 return 0; 732 } 733 734 static int cs35l56_sdw_dai_set_stream(struct snd_soc_dai *dai, 735 void *sdw_stream, int direction) 736 { 737 if (!sdw_stream) 738 return 0; 739 740 snd_soc_dai_dma_data_set(dai, direction, sdw_stream); 741 742 return 0; 743 } 744 745 static const struct snd_soc_dai_ops cs35l56_sdw_dai_ops = { 746 .set_tdm_slot = cs35l56_sdw_dai_set_tdm_slot, 747 .shutdown = cs35l56_sdw_dai_shutdown, 748 .hw_params = cs35l56_sdw_dai_hw_params, 749 .hw_free = cs35l56_sdw_dai_hw_free, 750 .mute_stream = cs35l56_mute_stream, 751 .set_stream = cs35l56_sdw_dai_set_stream, 752 }; 753 754 static struct snd_soc_dai_driver cs35l56_dai[] = { 755 { 756 .name = "cs35l56-asp1", 757 .id = 0, 758 .playback = { 759 .stream_name = "ASP1 Playback", 760 .channels_min = 1, 761 .channels_max = 2, 762 .rates = CS35L56_RATES, 763 .formats = CS35L56_RX_FORMATS, 764 }, 765 .capture = { 766 .stream_name = "ASP1 Capture", 767 .channels_min = 1, 768 .channels_max = 4, 769 .rates = CS35L56_RATES, 770 .formats = CS35L56_TX_FORMATS, 771 }, 772 .ops = &cs35l56_ops, 773 .symmetric_rate = 1, 774 .symmetric_sample_bits = 1, 775 }, 776 { 777 .name = "cs35l56-sdw1", 778 .id = 1, 779 .playback = { 780 .stream_name = "SDW1 Playback", 781 .channels_min = 1, 782 .channels_max = 2, 783 .rates = CS35L56_RATES, 784 .formats = CS35L56_RX_FORMATS, 785 }, 786 .capture = { 787 .stream_name = "SDW1 Capture", 788 .channels_min = 1, 789 .channels_max = 6, 790 .rates = CS35L56_RATES, 791 .formats = CS35L56_TX_FORMATS, 792 }, 793 .symmetric_rate = 1, 794 .ops = &cs35l56_sdw_dai_ops, 795 } 796 }; 797 798 static int cs35l56_wait_for_firmware_boot(struct cs35l56_private *cs35l56) 799 { 800 unsigned int reg; 801 unsigned int val; 802 int ret; 803 804 if (cs35l56->rev < CS35L56_REVID_B0) 805 reg = CS35L56_DSP1_HALO_STATE_A1; 806 else 807 reg = CS35L56_DSP1_HALO_STATE; 808 809 ret = regmap_read_poll_timeout(cs35l56->regmap, reg, 810 val, 811 (val < 0xFFFF) && (val >= CS35L56_HALO_STATE_BOOT_DONE), 812 CS35L56_HALO_STATE_POLL_US, 813 CS35L56_HALO_STATE_TIMEOUT_US); 814 815 if ((ret < 0) && (ret != -ETIMEDOUT)) { 816 dev_err(cs35l56->dev, "Failed to read HALO_STATE: %d\n", ret); 817 return ret; 818 } 819 820 if ((ret == -ETIMEDOUT) || (val != CS35L56_HALO_STATE_BOOT_DONE)) { 821 dev_err(cs35l56->dev, "Firmware boot fail: HALO_STATE=%#x\n", val); 822 return -EIO; 823 } 824 825 return 0; 826 } 827 828 static const struct reg_sequence cs35l56_system_reset_seq[] = { 829 REG_SEQ0(CS35L56_DSP_VIRTUAL1_MBOX_1, CS35L56_MBOX_CMD_SYSTEM_RESET), 830 }; 831 832 static void cs35l56_system_reset(struct cs35l56_private *cs35l56) 833 { 834 cs35l56->soft_resetting = true; 835 836 /* 837 * Must enter cache-only first so there can't be any more register 838 * accesses other than the controlled system reset sequence below. 839 */ 840 regcache_cache_only(cs35l56->regmap, true); 841 regmap_multi_reg_write_bypassed(cs35l56->regmap, 842 cs35l56_system_reset_seq, 843 ARRAY_SIZE(cs35l56_system_reset_seq)); 844 845 /* On SoundWire the registers won't be accessible until it re-enumerates. */ 846 if (cs35l56->sdw_peripheral) 847 return; 848 849 usleep_range(CS35L56_CONTROL_PORT_READY_US, CS35L56_CONTROL_PORT_READY_US + 400); 850 regcache_cache_only(cs35l56->regmap, false); 851 } 852 853 static void cs35l56_dsp_work(struct work_struct *work) 854 { 855 struct cs35l56_private *cs35l56 = container_of(work, 856 struct cs35l56_private, 857 dsp_work); 858 unsigned int reg; 859 unsigned int val; 860 int ret = 0; 861 862 if (!wait_for_completion_timeout(&cs35l56->init_completion, 863 msecs_to_jiffies(5000))) { 864 dev_err(cs35l56->dev, "%s: init_completion timed out\n", __func__); 865 goto complete; 866 } 867 868 if (!cs35l56->init_done || cs35l56->removing) 869 goto complete; 870 871 cs35l56->dsp.part = devm_kasprintf(cs35l56->dev, GFP_KERNEL, "cs35l56%s-%02x", 872 cs35l56->secured ? "s" : "", cs35l56->rev); 873 874 if (!cs35l56->dsp.part) 875 goto complete; 876 877 pm_runtime_get_sync(cs35l56->dev); 878 879 /* 880 * Disable SoundWire interrupts to prevent race with IRQ work. 881 * Setting sdw_irq_no_unmask prevents the handler re-enabling 882 * the SoundWire interrupt. 883 */ 884 if (cs35l56->sdw_peripheral) { 885 cs35l56->sdw_irq_no_unmask = true; 886 cancel_work_sync(&cs35l56->sdw_irq_work); > 887 sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_MASK_1, 0); > 888 sdw_read_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_STAT_1); > 889 sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_STAT_1, 0xFF); 890 } 891 892 ret = cs35l56_mbox_send(cs35l56, CS35L56_MBOX_CMD_SHUTDOWN); 893 if (ret) { 894 dev_dbg(cs35l56->dev, "%s: CS35L56_MBOX_CMD_SHUTDOWN ret %d\n", __func__, ret); 895 goto err; 896 } 897 898 if (cs35l56->rev < CS35L56_REVID_B0) 899 reg = CS35L56_DSP1_PM_CUR_STATE_A1; 900 else 901 reg = CS35L56_DSP1_PM_CUR_STATE; 902 903 ret = regmap_read_poll_timeout(cs35l56->regmap, reg, 904 val, (val == CS35L56_HALO_STATE_SHUTDOWN), 905 CS35L56_HALO_STATE_POLL_US, 906 CS35L56_HALO_STATE_TIMEOUT_US); 907 if (ret < 0) 908 dev_err(cs35l56->dev, "Failed to poll PM_CUR_STATE to 1 is %d (ret %d)\n", 909 val, ret); 910 911 /* Use wm_adsp to load and apply the firmware patch and coefficient files */ 912 ret = wm_adsp_power_up(&cs35l56->dsp); 913 if (ret) { 914 dev_dbg(cs35l56->dev, "%s: wm_adsp_power_up ret %d\n", __func__, ret); 915 goto err; 916 } 917 918 if (cs35l56->removing) 919 goto err; 920 921 mutex_lock(&cs35l56->irq_lock); 922 923 init_completion(&cs35l56->init_completion); 924 925 cs35l56_system_reset(cs35l56); 926 927 if (cs35l56->sdw_peripheral) { 928 /* 929 * The system-reset causes the CS35L56 to detach from the bus. 930 * Wait for the manager to re-enumerate the CS35L56 and 931 * cs35l56_init() to run again. 932 */ 933 if (!wait_for_completion_timeout(&cs35l56->init_completion, 934 msecs_to_jiffies(5000))) { 935 dev_err(cs35l56->dev, "%s: init_completion timed out (SDW)\n", __func__); 936 goto err_unlock; 937 } 938 } else if (cs35l56_init(cs35l56)) { 939 goto err_unlock; 940 } 941 942 cs35l56->fw_patched = true; 943 944 err_unlock: 945 mutex_unlock(&cs35l56->irq_lock); 946 err: 947 pm_runtime_mark_last_busy(cs35l56->dev); 948 pm_runtime_put_autosuspend(cs35l56->dev); 949 950 /* Re-enable SoundWire interrupts */ 951 if (cs35l56->sdw_peripheral) { 952 cs35l56->sdw_irq_no_unmask = false; 953 sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_MASK_1, 954 CS35L56_SDW_INT_MASK_CODEC_IRQ); 955 } 956 957 complete: 958 complete_all(&cs35l56->dsp_ready_completion); 959 } 960 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests

2 2

[PATCH] ASoC: dt-bindings: adi,adau17x1: fix indentaion and example
by Krzysztof Kozlowski 17 Mar '23

17 Mar '23

Fix errors in binding indentation and example: adi,adau17x1.yaml:8:2: [warning] wrong indentation: expected 2 but found 1 (indentation) adi,adau17x1.example.dts:29.3-30.1 syntax error Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Documentation/devicetree/bindings/sound/adi,adau17x1.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml index 45955f38b6fd..8ef1e7f6ec91 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml @@ -4,8 +4,7 @@ $id: http://devicetree.org/schemas/sound/adi,adau17x1.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: - Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 Codec +title: Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 Codec maintainers: - Lars-Peter Clausen <lars(a)metafoo.de> @@ -50,3 +49,4 @@ examples: clock-names = "mclk"; clocks = <&audio_clock>; }; + }; -- 2.34.1

1 1

[PATCH v2] ASoC: dt-bindings: adi,adau17x1: Convert to DT schema
by Vijaya Anand 17 Mar '23

17 Mar '23

Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format. Signed-off-by: Vijaya Anand <sunrockers8(a)gmail.com> Cc: Daniel Baluta <daniel.baluta(a)nxp.com> --- Changes since v1: - added 'Codec' in title to clarify type of devices - put compatible devices in lexographic order - changed description of clocks - changed 'unevaluatedProperties' to 'additionalProperties' - changed node names to be generic --- .../bindings/sound/adi,adau17x1.txt | 32 ------------ .../bindings/sound/adi,adau17x1.yaml | 52 +++++++++++++++++++ 2 files changed, 52 insertions(+), 32 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.txt create mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.yaml diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.txt b/Documentation/devicetree/bindings/sound/adi,adau17x1.txt deleted file mode 100644 index 1447dec28125..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,adau17x1.txt +++ /dev/null @@ -1,32 +0,0 @@ -Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 - -Required properties: - - - compatible: Should contain one of the following: - "adi,adau1361" - "adi,adau1461" - "adi,adau1761" - "adi,adau1961" - "adi,adau1381" - "adi,adau1781" - - - reg: The i2c address. Value depends on the state of ADDR0 - and ADDR1, as wired in hardware. - -Optional properties: - - clock-names: If provided must be "mclk". - - clocks: phandle + clock-specifiers for the clock that provides - the audio master clock for the device. - -Examples: -#include <dt-bindings/sound/adau17x1.h> - - i2c_bus { - adau1361@38 { - compatible = "adi,adau1761"; - reg = <0x38>; - - clock-names = "mclk"; - clocks = <&audio_clock>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml new file mode 100644 index 000000000000..8ef1e7f6ec91 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau17x1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 Codec + +maintainers: + - Lars-Peter Clausen <lars(a)metafoo.de> + +properties: + compatible: + enum: + - adi,adau1361 + - adi,adau1381 + - adi,adau1461 + - adi,adau1761 + - adi,adau1781 + - adi,adau1961 + + reg: + maxItems: 1 + description: + The i2c address. Value depends on the state of ADDR0 and ADDR1, + as wired in hardware. + + clock-names: + const: mclk + + clocks: + items: + - description: provides the audio master clock for the device. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@38 { + compatible = "adi,adau1761"; + reg = <0x38>; + clock-names = "mclk"; + clocks = <&audio_clock>; + }; + }; -- 2.37.1 (Apple Git-137.1)

4 7

[PATCH v3 0/2] ASoC: dt-bindings: renesas,rsnd.yaml: add R-Car Gen4 support
by Kuninori Morimoto 17 Mar '23

17 Mar '23

Hi Mark These are v3 of R-Car Gen4 support for Renesas sound driver. I have posted these patches as [RFC], because the schemas doesn't work correctly for me under certain conditions. "required: dmas/dma-names" always hits to "if-then" and never hits to "else" for some reasons. I'm still not sure why... But to be very strict, actually, this schemas is not mandatory, because SSI has PIO transfer mode which doesn't need to have DMA settings. This patch-set drops "dmas/dma-names" from SSI for now, and ignore the issue, but it is *not* a wrong schemas. v2 -> v2 - keep clock-name description on top - tidyup git-log v1 -> v2 - tidyup Subject - separate patches (drop "dmas/dma-names", add Gen4 support) - minItems -> maxItems - more git-logs. Link: https://lore.kernel.org/all/87zg9vk0ex.wl-kuninori.morimoto.gx@renesas.com/… Link: https://lore.kernel.org/all/87r0v2uvm7.wl-kuninori.morimoto.gx@renesas.com/… Link: https://lore.kernel.org/all/87r0v1t02h.wl-kuninori.morimoto.gx@renesas.com/… Link: https://lore.kernel.org/all/87y1p7bpma.wl-kuninori.morimoto.gx@renesas.com/… -- 2.25.1

5 17

Re: [PATCH v2 8/8] ASoC: cs35l56: Add driver for Cirrus Logic CS35L56
by kernel test robot 17 Mar '23

17 Mar '23

Hi Richard, Thank you for the patch! Yet something to improve: [auto build test ERROR on broonie-sound/for-next] [also build test ERROR on linus/master v6.3-rc2 next-20230316] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Richard-Fitzgerald-via-Alsa-… base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next patch link: https://lore.kernel.org/r/167872265923.26.336497278776737619%40mailman-core… patch subject: [PATCH v2 8/8] ASoC: cs35l56: Add driver for Cirrus Logic CS35L56 config: x86_64-buildonly-randconfig-r004-20230313 (https://download.01.org/0day-ci/archive/20230317/202303171105.3mGHjK8s-lkp@…) compiler: gcc-11 (Debian 11.3.0-8) 11.3.0 reproduce (this is a W=1 build): # https://github.com/intel-lab-lkp/linux/commit/5856c94d659f9c9963f5c37762cf2… git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Richard-Fitzgerald-via-Alsa-devel/ASoC-wm_adsp-Use-no_core_startstop-to-prevent-creating-preload-control/20230313-235605 git checkout 5856c94d659f9c9963f5c37762cf201e1f1765e9 # save the config file mkdir build_dir && cp config build_dir/.config make W=1 O=build_dir ARCH=x86_64 olddefconfig make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/platform/x86/ If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202303171105.3mGHjK8s-lkp@intel.com/ All error/warnings (new ones prefixed by >>): drivers/platform/x86/serial-multi-instantiate.c: In function 'smi_spi_probe': >> drivers/platform/x86/serial-multi-instantiate.c:98:15: error: implicit declaration of function 'acpi_spi_count_resources'; did you mean 'acpi_set_current_resources'? [-Werror=implicit-function-declaration] 98 | ret = acpi_spi_count_resources(adev); | ^~~~~~~~~~~~~~~~~~~~~~~~ | acpi_set_current_resources >> drivers/platform/x86/serial-multi-instantiate.c:112:27: error: implicit declaration of function 'acpi_spi_device_alloc' [-Werror=implicit-function-declaration] 112 | spi_dev = acpi_spi_device_alloc(NULL, adev, i); | ^~~~~~~~~~~~~~~~~~~~~ >> drivers/platform/x86/serial-multi-instantiate.c:112:25: warning: assignment to 'struct spi_device *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 112 | spi_dev = acpi_spi_device_alloc(NULL, adev, i); | ^ >> drivers/platform/x86/serial-multi-instantiate.c:115:59: error: invalid use of undefined type 'struct acpi_device' 115 | dev_name(&adev->dev)); | ^~ drivers/platform/x86/serial-multi-instantiate.c:137:53: error: invalid use of undefined type 'struct acpi_device' 137 | dev_name(&adev->dev)); | ^~ cc1: some warnings being treated as errors Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for SERIAL_MULTI_INSTANTIATE Depends on [n]: X86_PLATFORM_DEVICES [=n] && I2C [=y] && SPI [=y] && ACPI [=n] Selected by [y]: - SND_SOC_CS35L56_I2C [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] - SND_SOC_CS35L56_SPI [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SPI_MASTER [=y] vim +112 drivers/platform/x86/serial-multi-instantiate.c 68f201f9061c000 Stefan Binding 2022-01-21 79 68f201f9061c000 Stefan Binding 2022-01-21 80 /** 68f201f9061c000 Stefan Binding 2022-01-21 81 * smi_spi_probe - Instantiate multiple SPI devices from inst array 68f201f9061c000 Stefan Binding 2022-01-21 82 * @pdev: Platform device 68f201f9061c000 Stefan Binding 2022-01-21 83 * @smi: Internal struct for Serial multi instantiate driver 68f201f9061c000 Stefan Binding 2022-01-21 84 * @inst_array: Array of instances to probe 68f201f9061c000 Stefan Binding 2022-01-21 85 * 68f201f9061c000 Stefan Binding 2022-01-21 86 * Returns the number of SPI devices instantiate, Zero if none is found or a negative error code. 68f201f9061c000 Stefan Binding 2022-01-21 87 */ 8b50c48d59a9cd0 Andy Shevchenko 2022-07-10 88 static int smi_spi_probe(struct platform_device *pdev, struct smi *smi, 68f201f9061c000 Stefan Binding 2022-01-21 89 const struct smi_instance *inst_array) 68f201f9061c000 Stefan Binding 2022-01-21 90 { 68f201f9061c000 Stefan Binding 2022-01-21 91 struct device *dev = &pdev->dev; 8b50c48d59a9cd0 Andy Shevchenko 2022-07-10 92 struct acpi_device *adev = ACPI_COMPANION(dev); 68f201f9061c000 Stefan Binding 2022-01-21 93 struct spi_controller *ctlr; 68f201f9061c000 Stefan Binding 2022-01-21 94 struct spi_device *spi_dev; 68f201f9061c000 Stefan Binding 2022-01-21 95 char name[50]; 68f201f9061c000 Stefan Binding 2022-01-21 96 int i, ret, count; 68f201f9061c000 Stefan Binding 2022-01-21 97 68f201f9061c000 Stefan Binding 2022-01-21 @98 ret = acpi_spi_count_resources(adev); 68f201f9061c000 Stefan Binding 2022-01-21 99 if (ret < 0) 68f201f9061c000 Stefan Binding 2022-01-21 100 return ret; f3e13bbc6f5a84f Andy Shevchenko 2022-07-10 101 if (!ret) 2b5b27826a48eea Andy Shevchenko 2022-07-10 102 return -ENOENT; 68f201f9061c000 Stefan Binding 2022-01-21 103 68f201f9061c000 Stefan Binding 2022-01-21 104 count = ret; 68f201f9061c000 Stefan Binding 2022-01-21 105 68f201f9061c000 Stefan Binding 2022-01-21 106 smi->spi_devs = devm_kcalloc(dev, count, sizeof(*smi->spi_devs), GFP_KERNEL); 68f201f9061c000 Stefan Binding 2022-01-21 107 if (!smi->spi_devs) 68f201f9061c000 Stefan Binding 2022-01-21 108 return -ENOMEM; 68f201f9061c000 Stefan Binding 2022-01-21 109 68f201f9061c000 Stefan Binding 2022-01-21 110 for (i = 0; i < count && inst_array[i].type; i++) { 68f201f9061c000 Stefan Binding 2022-01-21 111 68f201f9061c000 Stefan Binding 2022-01-21 @112 spi_dev = acpi_spi_device_alloc(NULL, adev, i); 68f201f9061c000 Stefan Binding 2022-01-21 113 if (IS_ERR(spi_dev)) { 14a9aa99aca6c28 Andy Shevchenko 2022-07-10 114 ret = dev_err_probe(dev, PTR_ERR(spi_dev), "failed to allocate SPI device %s from ACPI\n", 14a9aa99aca6c28 Andy Shevchenko 2022-07-10 @115 dev_name(&adev->dev)); 68f201f9061c000 Stefan Binding 2022-01-21 116 goto error; 68f201f9061c000 Stefan Binding 2022-01-21 117 } 68f201f9061c000 Stefan Binding 2022-01-21 118 68f201f9061c000 Stefan Binding 2022-01-21 119 ctlr = spi_dev->controller; 68f201f9061c000 Stefan Binding 2022-01-21 120 68f201f9061c000 Stefan Binding 2022-01-21 121 strscpy(spi_dev->modalias, inst_array[i].type, sizeof(spi_dev->modalias)); 68f201f9061c000 Stefan Binding 2022-01-21 122 68f201f9061c000 Stefan Binding 2022-01-21 123 ret = smi_get_irq(pdev, adev, &inst_array[i]); 68f201f9061c000 Stefan Binding 2022-01-21 124 if (ret < 0) { 68f201f9061c000 Stefan Binding 2022-01-21 125 spi_dev_put(spi_dev); 68f201f9061c000 Stefan Binding 2022-01-21 126 goto error; 68f201f9061c000 Stefan Binding 2022-01-21 127 } 68f201f9061c000 Stefan Binding 2022-01-21 128 spi_dev->irq = ret; 68f201f9061c000 Stefan Binding 2022-01-21 129 68f201f9061c000 Stefan Binding 2022-01-21 130 snprintf(name, sizeof(name), "%s-%s-%s.%d", dev_name(&ctlr->dev), dev_name(dev), 68f201f9061c000 Stefan Binding 2022-01-21 131 inst_array[i].type, i); 68f201f9061c000 Stefan Binding 2022-01-21 132 spi_dev->dev.init_name = name; 68f201f9061c000 Stefan Binding 2022-01-21 133 68f201f9061c000 Stefan Binding 2022-01-21 134 ret = spi_add_device(spi_dev); 68f201f9061c000 Stefan Binding 2022-01-21 135 if (ret) { 14a9aa99aca6c28 Andy Shevchenko 2022-07-10 136 dev_err_probe(&ctlr->dev, ret, "failed to add SPI device %s from ACPI\n", 14a9aa99aca6c28 Andy Shevchenko 2022-07-10 137 dev_name(&adev->dev)); 68f201f9061c000 Stefan Binding 2022-01-21 138 spi_dev_put(spi_dev); 68f201f9061c000 Stefan Binding 2022-01-21 139 goto error; 68f201f9061c000 Stefan Binding 2022-01-21 140 } 68f201f9061c000 Stefan Binding 2022-01-21 141 68f201f9061c000 Stefan Binding 2022-01-21 142 dev_dbg(dev, "SPI device %s using chip select %u", name, spi_dev->chip_select); 68f201f9061c000 Stefan Binding 2022-01-21 143 68f201f9061c000 Stefan Binding 2022-01-21 144 smi->spi_devs[i] = spi_dev; 68f201f9061c000 Stefan Binding 2022-01-21 145 smi->spi_num++; 68f201f9061c000 Stefan Binding 2022-01-21 146 } 68f201f9061c000 Stefan Binding 2022-01-21 147 68f201f9061c000 Stefan Binding 2022-01-21 148 if (smi->spi_num < count) { 68f201f9061c000 Stefan Binding 2022-01-21 149 dev_dbg(dev, "Error finding driver, idx %d\n", i); 68f201f9061c000 Stefan Binding 2022-01-21 150 ret = -ENODEV; 68f201f9061c000 Stefan Binding 2022-01-21 151 goto error; 68f201f9061c000 Stefan Binding 2022-01-21 152 } 68f201f9061c000 Stefan Binding 2022-01-21 153 68f201f9061c000 Stefan Binding 2022-01-21 154 dev_info(dev, "Instantiated %d SPI devices.\n", smi->spi_num); 68f201f9061c000 Stefan Binding 2022-01-21 155 68f201f9061c000 Stefan Binding 2022-01-21 156 return 0; 68f201f9061c000 Stefan Binding 2022-01-21 157 error: 68f201f9061c000 Stefan Binding 2022-01-21 158 smi_devs_unregister(smi); 68f201f9061c000 Stefan Binding 2022-01-21 159 68f201f9061c000 Stefan Binding 2022-01-21 160 return ret; 35a36cbb7b1ce75 Lucas Tanure 2022-01-21 161 } 35a36cbb7b1ce75 Lucas Tanure 2022-01-21 162 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests

1 0

[PATCH] ASoC: dt-bindings: qcom,lpass-rx-macro: correct minItems for clocks
by Krzysztof Kozlowski 17 Mar '23

17 Mar '23

The RX macro codec comes on some platforms in two variants - ADSP and ADSP bypassed - thus the clock-names varies from 3 to 5. The clocks must vary as well: sc7280-idp.dtb: codec@3200000: clocks: [[202, 8], [202, 7], [203]] is too short Fixes: 852fda58d99a ("ASoC: qcom: dt-bindings: Update bindings for clocks in lpass digital codes") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index 79c6f8da1319..b0b95689d78b 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -30,6 +30,7 @@ properties: const: 0 clocks: + minItems: 3 maxItems: 5 clock-names: -- 2.34.1

2 1

[PATCH AUTOSEL 6.1 1/6] ASoC: amd: yp: Add OMEN by HP Gaming Laptop 16z-n000 to quirks
by Sasha Levin 16 Mar '23

16 Mar '23

From: Joseph Hunkeler <jhunkeler(a)gmail.com> [ Upstream commit 22ce6843abec19270bf69b176d7ee0a4ef781da5 ] Enables display microphone on the HP OMEN 16z-n000 (8A42) laptop Signed-off-by: Joseph Hunkeler <jhunkeler(a)gmail.com> Link: https://lore.kernel.org/r/20230216155007.26143-1-jhunkeler@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 36314753923b8..4e681e9c08fe5 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -255,6 +255,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "15NBC1011"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16z-n000"), + } + }, {} }; -- 2.39.2

1 1

[PATCH AUTOSEL 6.2 1/7] ASoC: amd: yp: Add OMEN by HP Gaming Laptop 16z-n000 to quirks
by Sasha Levin 16 Mar '23

16 Mar '23

From: Joseph Hunkeler <jhunkeler(a)gmail.com> [ Upstream commit 22ce6843abec19270bf69b176d7ee0a4ef781da5 ] Enables display microphone on the HP OMEN 16z-n000 (8A42) laptop Signed-off-by: Joseph Hunkeler <jhunkeler(a)gmail.com> Link: https://lore.kernel.org/r/20230216155007.26143-1-jhunkeler@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 36314753923b8..4e681e9c08fe5 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -255,6 +255,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "15NBC1011"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16z-n000"), + } + }, {} }; -- 2.39.2

1 2

[PATCH] ASoC: codecs:rx-macro: Fixing uninitialized variables.
by Ravulapati Vishnu Vardhan Rao 16 Mar '23

16 Mar '23

Initializing the uninitialized variables to avoid any unexpected garbage value to be propagated further. Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr(a)quicinc.com> --- sound/soc/codecs/lpass-rx-macro.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c index a73a7d7a1c0a..0c8b79ff2fc5 100644 --- a/sound/soc/codecs/lpass-rx-macro.c +++ b/sound/soc/codecs/lpass-rx-macro.c @@ -2219,6 +2219,8 @@ static void rx_macro_hd2_control(struct snd_soc_component *component, u16 interp_idx, int event) { u16 hd2_scale_reg, hd2_enable_reg; + hd2_scale_reg = 0; + hd2_enable_reg = 0; switch (interp_idx) { case INTERP_HPHL: -- 2.17.1

2 1

Maybe a bug: libasound_module_pcm_pulse.la uses snd_pcm_sw_params_get_start_threshold but not linked against -lasound?
by GitHub issues - edited 16 Mar '23

16 Mar '23

alsa-project/alsa-plugins issue #52 was edited from MIvanchev: I see pcm_pulse.c uses snd_pcm_sw_params_get_start_threshold from -lasound but AFAIK that is a bug, because libasound is loading the plugins and not the other way around. Can someone explain what's going on, I'm getting undefined references.. Issue URL : https://github.com/alsa-project/alsa-plugins/issues/52 Repository URL: https://github.com/alsa-project/alsa-plugins

1 0

Maybe a bug: libasound_module_pcm_pulse.la uses snd_pcm_sw_params_get_start_threshold but not linked against -lasound?
by GitHub issues - edited 16 Mar '23

16 Mar '23

alsa-project/alsa-plugins issue #52 was edited from MIvanchev: I see pcm_pulse.c uses snd_pcm_sw_params_get_start_threshold from -lasound but AFAIK that is a bug, because libasound is loading the plugins and not the other way around. Issue URL : https://github.com/alsa-project/alsa-plugins/issues/52 Repository URL: https://github.com/alsa-project/alsa-plugins

1 0

Maybe a bug: libasound_module_ctl_pulse.la uses snd_pcm_sw_params_get_start_threshold but not linked against -lasound?
by GitHub issues - opened 16 Mar '23

16 Mar '23

alsa-project/alsa-plugins issue #52 was opened from MIvanchev: I see pcm_pulse.c uses snd_pcm_sw_params_get_start_threshold from -lasound but AFAIK that is a bug, because libasound is loading the plugins and not the other way around. Issue URL : https://github.com/alsa-project/alsa-plugins/issues/52 Repository URL: https://github.com/alsa-project/alsa-plugins

1 0

[PATCH] ASoC: dt-bindings: maxim,max9759: Convert to DT schema.
by Otabek Nazrullaev 16 Mar '23

16 Mar '23

Convert Maxim MAX9759 Speaker Amplifier bindings to DT schema. Add missing gpio header file into examples section Signed-off-by: Otabek Nazrullaev <otabeknazrullaev1998(a)gmail.com> Cc: Daniel Baluta <daniel.baluta(a)nxp.com> --- .../bindings/sound/maxim,max9759.txt | 18 -------- .../bindings/sound/maxim,max9759.yaml | 45 +++++++++++++++++++ 2 files changed, 45 insertions(+), 18 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/maxim,max9759.txt create mode 100644 Documentation/devicetree/bindings/sound/maxim,max9759.yaml diff --git a/Documentation/devicetree/bindings/sound/maxim,max9759.txt b/Documentation/devicetree/bindings/sound/maxim,max9759.txt deleted file mode 100644 index 737a996374d3..000000000000 --- a/Documentation/devicetree/bindings/sound/maxim,max9759.txt +++ /dev/null @@ -1,18 +0,0 @@ -Maxim MAX9759 Speaker Amplifier -=============================== - -Required properties: -- compatible : "maxim,max9759" -- shutdown-gpios : the gpio connected to the shutdown pin -- mute-gpios : the gpio connected to the mute pin -- gain-gpios : the 2 gpios connected to the g1 and g2 pins - -Example: - -max9759: analog-amplifier { - compatible = "maxim,max9759"; - shutdown-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; - mute-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; - gain-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>, - <&gpio3 25 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/sound/maxim,max9759.yaml b/Documentation/devicetree/bindings/sound/maxim,max9759.yaml new file mode 100644 index 000000000000..a76ee6a635af --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max9759.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max9759.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX9759 Speaker Amplifier + +maintainers: + - Otabek Nazrullaev <otabeknazrullaev1998(a)gmail.com> + +properties: + compatible: + const: maxim,max9759 + + shutdown-gpios: + maxItems: 1 + description: the gpio connected to the shutdown pin + + mute-gpios: + maxItems: 1 + description: the gpio connected to the mute pin + + gain-gpios: + maxItems: 2 + description: the 2 gpios connected to the g1 and g2 pins + +required: + - compatible + - shutdown-gpios + - mute-gpios + - gain-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + amplifier { + compatible = "maxim,max9759"; + shutdown-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + mute-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + gain-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>, + <&gpio3 25 GPIO_ACTIVE_LOW>; + }; -- 2.34.1

3 2

[regression] Bug 217063 - Commit 2232b2d breaks microphone on Lenovo "82SJ" Ideapad 14ARH7
by Linux regression tracking (Thorsten Leemhuis) 16 Mar '23

16 Mar '23

Hi, this is your Linux kernel regression tracker. I noticed a regression report in bugzilla.kernel.org. As many (most?) kernel developer don't keep an eye on it, I decided to forward it by mail. Quoting from https://bugzilla.kernel.org/show_bug.cgi?id=217063 : > [reply] [−] Description Joseph R 2023-02-21 00:35:34 UTC > > Created attachment 303765 [details] lspci -vv > > Commit 2232b2dd8cd4f1e6d554b2c3f6899ce36f791b67, intended to fix > sound on Lenovo Yoga Slim 7 Pro X, makes the microphone on Lenovo > Ideapad 14 14ARH7 with product code Lenovo "82SJ" unusable. > > Simply removing the lines added by the commit make the microphone > work again without issues. > > Attached is lspci on a kernel with the lines removed. > > First kernel bug report, so please let me know how I can help get > this fixed! See the ticket for more details. [TLDR for the rest of this mail: I'm adding this report to the list of tracked Linux kernel regressions; the text you find below is based on a few templates paragraphs you might have encountered already in similar form.] BTW, let me use this mail to also add the report to the list of tracked regressions to ensure it's doesn't fall through the cracks: #regzbot introduced: 2232b2dd8cd4f1e6d5 https://bugzilla.kernel.org/show_bug.cgi?id=217063 #regzbot title: alsa/asoc: microphone on Lenovo "82SJ" Ideapad 14ARH7 broken #regzbot ignore-activity This isn't a regression? This issue or a fix for it are already discussed somewhere else? It was fixed already? You want to clarify when the regression started to happen? Or point out I got the title or something else totally wrong? Then just reply and tell me -- ideally while also telling regzbot about it, as explained by the page listed in the footer of this mail. Developers: When fixing the issue, remember to add 'Link:' tags pointing to the report (e.g. the buzgzilla ticket and maybe this mail as well, if this thread sees some discussion). See page linked in footer for details. Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) -- Everything you wanna know about Linux kernel regression tracking: https://linux-regtracking.leemhuis.info/about/#tldr If I did something stupid, please tell me, as explained on that page.

2 1

Re: [PATCH 3/7] Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry
by kernel test robot 16 Mar '23

16 Mar '23

Hi Herve, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on broonie-sound/for-next] [also build test WARNING on robh/for-next char-misc/char-misc-testing char-misc/char-misc-next char-misc/char-misc-linus linus/master v6.3-rc2 next-20230316] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Herve-Codina-via-Alsa-devel/… base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next patch link: https://lore.kernel.org/r/167888779364.26.9200222608363841485%40mailman-cor… patch subject: [PATCH 3/7] Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry reproduce: # https://github.com/intel-lab-lkp/linux/commit/0140596e508d18933cd319314838b… git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Herve-Codina-via-Alsa-devel/drivers-misc-Add-support-for-the-Lantiq-PEF2256-framer/20230315-214833 git checkout 0140596e508d18933cd319314838bc802214b345 make menuconfig # enable CONFIG_COMPILE_TEST, CONFIG_WARN_MISSING_DOCUMENTS, CONFIG_WARN_ABI_ERRORS make htmldocs If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202303161547.ZzSQWnIQ-lkp@intel.com/ All warnings (new ones prefixed by >>): >> Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256:2: WARNING: Unexpected indentation. >> Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256:2: WARNING: Block quote ends without a blank line; unexpected unindent. vim +2 Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256 > 2 KernelVersion: 6.4 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests

1 0

[PATCH] ASoC: soc-compress: Inherit atomicity from DAI link for Compress FE
by Daniel Baluta 16 Mar '23

16 Mar '23

From: Daniel Baluta <daniel.baluta(a)nxp.com> After commit bbf7d3b1c4f40 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE") BE and FE atomicity must match. In the case of Compress PCM there is a mismatch in atomicity between FE and BE and we get errors like this: [ 36.434566] sai1-wm8960-hifi: dpcm_be_connect: FE is atomic but BE is nonatomic, invalid configuration [ 36.444278] PCM Deep Buffer: ASoC: can't connect SAI1.OUT In order to fix this we must inherit the atomicity from DAI link associated with current PCM Compress FE. Fixes: bbf7d3b1c4f4 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE") Signed-off-by: Daniel Baluta <daniel.baluta(a)nxp.com> --- sound/soc/soc-compress.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index e7aa6f360cab..d649b0cf4744 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -622,6 +622,9 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num) return ret; } + /* inherit atomicity from DAI link */ + be_pcm->nonatomic = rtd->dai_link->nonatomic; + rtd->pcm = be_pcm; rtd->fe_compr = 1; if (rtd->dai_link->dpcm_playback) -- 2.25.1

3 4

Dual monitors, no sound after the monitor sleeps
by GitHub issues - opened 16 Mar '23

16 Mar '23

alsa-project/alsa-lib issue #307 was opened from viqbgrg: ```shell **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [2481W] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [PHL275E9] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 ``` ```shell **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [PHL275E9] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [2481W] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 ``` PHL275E9 and 2481W are reversed after waking up, when I use linux 5 kernel there is no such problem Issue URL : https://github.com/alsa-project/alsa-lib/issues/307 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH] soundwire: stream: restore cumulative bus bandwidth when compute_params callback failed
by Bard Liao 16 Mar '23

16 Mar '23

From: Shuming Fan <shumingf(a)realtek.com> The _sdw_prepare_stream function just returns the error code when compute_params callback failed. The cumulative bus bandwidth will keep the value and won't be decreased by sdw_deprepare_stream function. We should restore the value of cumulative bus bandwidth when compute_params callback failed. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> Reviewed-by: Paul Olaru <paul.olaru(a)oss.nxp.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- drivers/soundwire/stream.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 8c6da1739e3d..136b6850a3f0 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1369,7 +1369,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream, if (ret < 0) { dev_err(bus->dev, "Compute params failed: %d\n", ret); - return ret; + goto restore_params; } } -- 2.25.1

2 1

[PATCH v2] soundwire: bandwidth allocation: Use hweight32() to calculate set bits
by Richard Fitzgerald 16 Mar '23

16 Mar '23

Replace the call to sdw_ch_mask_to_ch() with a call to hweight32(). sdw_ch_mask_to_ch() is counting the number of set bits. The hweight() family of functions already do this, and they have an advantage of using a bit-counting instruction if it is available on the target CPU. This also fixes a potential infinite loop bug in the implementation of sdw_ch_mask_to_ch(). Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/soundwire/bus.h | 11 ----------- drivers/soundwire/generic_bandwidth_allocation.c | 3 ++- 2 files changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index 7631ef5e71fb..4ce8d708a39c 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -159,17 +159,6 @@ int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave, u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf); -/* Retrieve and return channel count from channel mask */ -static inline int sdw_ch_mask_to_ch(int ch_mask) -{ - int c = 0; - - for (c = 0; ch_mask; ch_mask >>= 1) - c += ch_mask & 1; - - return c; -} - /* Fill transport parameter data structure */ static inline void sdw_fill_xport_params(struct sdw_transport_params *params, int port_num, bool grp_ctrl_valid, diff --git a/drivers/soundwire/generic_bandwidth_allocation.c b/drivers/soundwire/generic_bandwidth_allocation.c index f7c66083a4dd..ea3e8ef408e4 100644 --- a/drivers/soundwire/generic_bandwidth_allocation.c +++ b/drivers/soundwire/generic_bandwidth_allocation.c @@ -6,6 +6,7 @@ * */ +#include <linux/bitops.h> #include <linux/device.h> #include <linux/module.h> #include <linux/mod_devicetable.h> @@ -54,7 +55,7 @@ static void sdw_compute_slave_ports(struct sdw_master_runtime *m_rt, slave_total_ch = 0; list_for_each_entry(p_rt, &s_rt->port_list, port_node) { - ch = sdw_ch_mask_to_ch(p_rt->ch_mask); + ch = hweight32(p_rt->ch_mask); sdw_fill_xport_params(&p_rt->transport_params, p_rt->num, false, -- 2.30.2

2 1

Re: [PATCH 2/7] drivers: misc: Add support for the Lantiq PEF2256 framer
by kernel test robot 16 Mar '23

16 Mar '23

Hi Herve, Thank you for the patch! Yet something to improve: [auto build test ERROR on broonie-sound/for-next] [also build test ERROR on robh/for-next char-misc/char-misc-testing char-misc/char-misc-next char-misc/char-misc-linus linus/master v6.3-rc2 next-20230315] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Herve-Codina-via-Alsa-devel/… base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next patch link: https://lore.kernel.org/r/167888778959.26.12757990479414568225%40mailman-co… patch subject: [PATCH 2/7] drivers: misc: Add support for the Lantiq PEF2256 framer config: s390-allmodconfig (https://download.01.org/0day-ci/archive/20230316/202303161232.ujDKi8PQ-lkp@…) compiler: s390-linux-gcc (GCC) 12.1.0 reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # https://github.com/intel-lab-lkp/linux/commit/93791052da597151cddbe64bc3013… git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Herve-Codina-via-Alsa-devel/drivers-misc-Add-support-for-the-Lantiq-PEF2256-framer/20230315-214833 git checkout 93791052da597151cddbe64bc3013d9fec19550f # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=s390 olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=s390 SHELL=/bin/bash If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202303161232.ujDKi8PQ-lkp@intel.com/ All errors (new ones prefixed by >>, old ones prefixed by <<): ERROR: modpost: "devm_ioremap_resource" [drivers/dma/qcom/hdma.ko] undefined! ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/fsl-edma.ko] undefined! ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/idma64.ko] undefined! ERROR: modpost: "iounmap" [drivers/tty/ipwireless/ipwireless.ko] undefined! ERROR: modpost: "ioremap" [drivers/tty/ipwireless/ipwireless.ko] undefined! ERROR: modpost: "devm_platform_ioremap_resource" [drivers/char/xillybus/xillybus_of.ko] undefined! >> ERROR: modpost: "devm_platform_ioremap_resource" [drivers/misc/pef2256.ko] undefined! ERROR: modpost: "devm_memremap" [drivers/misc/open-dice.ko] undefined! ERROR: modpost: "devm_memunmap" [drivers/misc/open-dice.ko] undefined! ERROR: modpost: "iounmap" [drivers/net/ethernet/8390/pcnet_cs.ko] undefined! WARNING: modpost: suppressed 16 unresolved symbol warnings because there were too many) -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests

1 0

[PATCH v2 1/7] arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
by Krzysztof Kozlowski 16 Mar '23

16 Mar '23

Bindings expect (and most of DTS use) the RPM G-Link node name to be "rpm-requests". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> --- Changes since v1: 1. Add Rb tag. --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index d32c9b2515ee..bbd94025ff5d 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -176,7 +176,7 @@ rpm-glink { qcom,rpm-msg-ram = <&rpm_msg_ram>; mboxes = <&apcs_glb 0>; - rpm_requests: glink-channel { + rpm_requests: rpm-requests { compatible = "qcom,rpm-ipq6018"; qcom,glink-channels = "rpm_requests"; -- 2.34.1

5 19

Re: [PATCH 2/7] drivers: misc: Add support for the Lantiq PEF2256 framer
by kernel test robot 15 Mar '23

15 Mar '23

Hi Herve, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on broonie-sound/for-next] [also build test WARNING on robh/for-next char-misc/char-misc-testing char-misc/char-misc-next char-misc/char-misc-linus linus/master v6.3-rc2 next-20230315] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Herve-Codina-via-Alsa-devel/… base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next patch link: https://lore.kernel.org/r/167888778959.26.12757990479414568225%40mailman-co… patch subject: [PATCH 2/7] drivers: misc: Add support for the Lantiq PEF2256 framer config: sparc-allyesconfig (https://download.01.org/0day-ci/archive/20230316/202303160430.HUK3FkVq-lkp@…) compiler: sparc64-linux-gcc (GCC) 12.1.0 reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # https://github.com/intel-lab-lkp/linux/commit/93791052da597151cddbe64bc3013… git remote add linux-review https://github.com/intel-lab-lkp/linux git fetch --no-tags linux-review Herve-Codina-via-Alsa-devel/drivers-misc-Add-support-for-the-Lantiq-PEF2256-framer/20230315-214833 git checkout 93791052da597151cddbe64bc3013d9fec19550f # save the config file mkdir build_dir && cp config build_dir/.config COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sparc olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sparc SHELL=/bin/bash drivers/misc/ If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <lkp(a)intel.com> | Link: https://lore.kernel.org/oe-kbuild-all/202303160430.HUK3FkVq-lkp@intel.com/ All warnings (new ones prefixed by >>): >> drivers/misc/pef2256.c:1054:38: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] 1054 | static const struct pinctrl_pin_desc const pef2256_v12_pins[] = { | ^~~~~ drivers/misc/pef2256.c:1065:38: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] 1065 | static const struct pinctrl_pin_desc const pef2256_v2x_pins[] = { | ^~~~~ vim +/const +1054 drivers/misc/pef2256.c 1053 > 1054 static const struct pinctrl_pin_desc const pef2256_v12_pins[] = { 1055 PEF2256_PINCTRL_PIN(0, "RPA", PEF2256_PC1, PEF2256_12_PC_RPC_MASK), 1056 PEF2256_PINCTRL_PIN(1, "RPB", PEF2256_PC2, PEF2256_12_PC_RPC_MASK), 1057 PEF2256_PINCTRL_PIN(2, "RPC", PEF2256_PC3, PEF2256_12_PC_RPC_MASK), 1058 PEF2256_PINCTRL_PIN(3, "RPD", PEF2256_PC4, PEF2256_12_PC_RPC_MASK), 1059 PEF2256_PINCTRL_PIN(4, "XPA", PEF2256_PC1, PEF2256_12_PC_XPC_MASK), 1060 PEF2256_PINCTRL_PIN(5, "XPB", PEF2256_PC2, PEF2256_12_PC_XPC_MASK), 1061 PEF2256_PINCTRL_PIN(6, "XPC", PEF2256_PC3, PEF2256_12_PC_XPC_MASK), 1062 PEF2256_PINCTRL_PIN(7, "XPD", PEF2256_PC4, PEF2256_12_PC_XPC_MASK), 1063 }; 1064 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests

1 0

[RFC PATCH v2] ASoC: dt-bindings: adi,adau17x1: Convert to DT schema
by Vijaya Anand 15 Mar '23

15 Mar '23

Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format. Signed-off-by: Vijaya Anand <sunrockers8(a)gmail.com> Cc: Daniel Baluta <daniel.baluta(a)nxp.com> --- Changes since v1: - added 'Codec' in title to clarify type of devices - put compatible devices in lexographic order - changed description of clocks - changed 'unevaluatedProperties' to 'additionalProperties' - changed node names to be generic --- .../bindings/sound/adi,adau17x1.txt | 32 ------------ .../bindings/sound/adi,adau17x1.yaml | 52 +++++++++++++++++++ 2 files changed, 52 insertions(+), 32 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.txt create mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.yaml diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.txt b/Documentation/devicetree/bindings/sound/adi,adau17x1.txt deleted file mode 100644 index 1447dec28125..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,adau17x1.txt +++ /dev/null @@ -1,32 +0,0 @@ -Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 - -Required properties: - - - compatible: Should contain one of the following: - "adi,adau1361" - "adi,adau1461" - "adi,adau1761" - "adi,adau1961" - "adi,adau1381" - "adi,adau1781" - - - reg: The i2c address. Value depends on the state of ADDR0 - and ADDR1, as wired in hardware. - -Optional properties: - - clock-names: If provided must be "mclk". - - clocks: phandle + clock-specifiers for the clock that provides - the audio master clock for the device. - -Examples: -#include <dt-bindings/sound/adau17x1.h> - - i2c_bus { - adau1361@38 { - compatible = "adi,adau1761"; - reg = <0x38>; - - clock-names = "mclk"; - clocks = <&audio_clock>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml new file mode 100644 index 000000000000..8ef1e7f6ec91 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau17x1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 Codec + +maintainers: + - Lars-Peter Clausen <lars(a)metafoo.de> + +properties: + compatible: + enum: + - adi,adau1361 + - adi,adau1381 + - adi,adau1461 + - adi,adau1761 + - adi,adau1781 + - adi,adau1961 + + reg: + maxItems: 1 + description: + The i2c address. Value depends on the state of ADDR0 and ADDR1, + as wired in hardware. + + clock-names: + const: mclk + + clocks: + items: + - description: provides the audio master clock for the device. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@38 { + compatible = "adi,adau1761"; + reg = <0x38>; + clock-names = "mclk"; + clocks = <&audio_clock>; + }; + }; -- 2.37.1 (Apple Git-137.1)

2 1

[PATCH 1/2] soundwire: qcom: define hardcoded version magic numbers
by Krzysztof Kozlowski 15 Mar '23

15 Mar '23

Use a define instead of hard-coded register values for Soundwire hardware version number, because it is a bit easier to read and allows to drop explaining comment. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/soundwire/qcom.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index ba502129150d..79bebcecde6d 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -28,6 +28,9 @@ #define SWRM_LINK_MANAGER_EE 0x018 #define SWRM_EE_CPU 1 #define SWRM_FRM_GEN_ENABLED BIT(0) +#define SWRM_VERSION_1_3_0 0x01030000 +#define SWRM_VERSION_1_5_1 0x01050001 +#define SWRM_VERSION_1_7_0 0x01070000 #define SWRM_COMP_HW_VERSION 0x00 #define SWRM_COMP_CFG_ADDR 0x04 #define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK BIT(1) @@ -351,8 +354,7 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, /* Its assumed that write is okay as we do not get any status back */ swrm->reg_write(swrm, SWRM_CMD_FIFO_WR_CMD, val); - /* version 1.3 or less */ - if (swrm->version <= 0x01030000) + if (swrm->version <= SWRM_VERSION_1_3_0) usleep_range(150, 155); if (cmd_id == SWR_BROADCAST_CMD_ID) { @@ -695,7 +697,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK); ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val); - if (ctrl->version >= 0x01070000) { + if (ctrl->version >= SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); @@ -704,8 +706,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) } /* Configure number of retries of a read/write cmd */ - if (ctrl->version >= 0x01050001) { - /* Only for versions >= 1.5.1 */ + if (ctrl->version >= SWRM_VERSION_1_5_1) { ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, SWRM_RD_WR_CMD_RETRIES | SWRM_CONTINUE_EXEC_ON_CMD_IGNORE); @@ -1239,7 +1240,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", bp_mode, nports); if (ret) { - if (ctrl->version <= 0x01030000) + if (ctrl->version <= SWRM_VERSION_1_3_0) memset(bp_mode, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS); else return ret; @@ -1442,7 +1443,7 @@ static int qcom_swrm_probe(struct platform_device *pdev) pm_runtime_enable(dev); /* Clk stop is not supported on WSA Soundwire masters */ - if (ctrl->version <= 0x01030000) { + if (ctrl->version <= SWRM_VERSION_1_3_0) { ctrl->clock_stop_not_supported = true; } else { ctrl->reg_read(ctrl, SWRM_COMP_MASTER_ID, &val); @@ -1527,7 +1528,7 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) } else { reset_control_reset(ctrl->audio_cgcr); - if (ctrl->version >= 0x01070000) { + if (ctrl->version >= SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); -- 2.34.1

4 8

[PATCH 00/16] soundwire: updates before LunarLake introduction
by Bard Liao 15 Mar '23

15 Mar '23

This series provides a set of cleanups and new abstractions needed for the introduction of LunarLake support. For now this is an iso-functionality change, with changes on the Intel and Cadence sides. The low-level support for LunarLake will be introduced in a follow-up series that depends on HDaudio multi-link extensions. Pierre-Louis Bossart (16): soundwire: intel: move common definitions to header file soundwire: intel: remove stale/misleading comment soundwire: intel: remove PDI-level restrictions on rates and formats soundwire: intel: remove useless abstraction soundwire: intel: simplify sync_go sequence soundwire: intel: add sync_arm/sync_go to ops soundwire: intel: use indirection before moving bus start/stop sequences soundwire: intel: move bus common sequences to different file soundwire: intel: add abstraction for cmdsync check soundwire: intel: move bank switch routine to common intel_bus_common.c soundwire: cadence: remove CDNS_MCP_CONFIG_SSPMOD soundwire: cadence: add helpers to access IP_MCP registers soundwire: cadence: split access to IP_MCP_CONFIG fields soundwire: cadence: split access to IP_MCP_CONTROL fields soundwire: cadence: split access to IP_MCP_CMDCTRL fields soundwire: cadence: change access to IP_MCP_CMD_BASE drivers/soundwire/Makefile | 3 +- drivers/soundwire/cadence_master.c | 139 +++++++----- drivers/soundwire/cadence_master.h | 3 + drivers/soundwire/intel.c | 325 ++------------------------- drivers/soundwire/intel.h | 67 ++++++ drivers/soundwire/intel_bus_common.c | 259 +++++++++++++++++++++ include/linux/soundwire/sdw_intel.h | 11 + 7 files changed, 444 insertions(+), 363 deletions(-) create mode 100644 drivers/soundwire/intel_bus_common.c -- 2.25.1

2 17

[PATCH] ASoC: dt-bindings: renesas: rsnd: Update example
by Geert Uytterhoeven 15 Mar '23

15 Mar '23

Miscellaneous updates to make the example match reality: - Correct SSI resource region size, - Complete half-conversion to new-style CPG/MSSR bindings, - Add missing power-domains, resets, and reset-names properties, - Use interrupt binding definitions instead of hardcoded numbers, - Correct interrupt flags, - Drop double blank line. Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> --- .../bindings/sound/renesas,rsnd.yaml | 51 ++++++++++++------- 1 file changed, 32 insertions(+), 19 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 55e5213b90a17d1d..676dfe7a7f1766cd 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -372,30 +372,33 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> rcar_sound: sound@ec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2"; reg = <0xec500000 0x1000>, /* SCU */ <0xec5a0000 0x100>, /* ADG */ <0xec540000 0x1000>, /* SSIU */ - <0xec541000 0x1280>, /* SSI */ + <0xec541000 0x280>, /* SSI */ <0xec740000 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - clocks = <&mstp10_clks 1005>, /* SSI-ALL */ - <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */ - <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */ - <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */ - <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */ - <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */ - <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */ - <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */ - <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */ - <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */ - <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */ - <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* MIX1, MIX0 */ - <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CTU1, CTU0 */ - <&mstp10_clks 1019>, <&mstp10_clks 1018>, /* DVC0, DVC1 */ + clocks = <&cpg CPG_MOD 1005>, /* SSI-ALL */ + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, /* SSI9, SSI8 */ + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, /* SSI7, SSI6 */ + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, /* SSI5, SSI4 */ + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, /* SSI3, SSI2 */ + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, /* SSI1, SSI0 */ + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, /* SRC9, SRC8 */ + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, /* SRC7, SRC6 */ + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, /* SRC5, SRC4 */ + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, /* SRC3, SRC2 */ + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, /* SRC1, SRC0 */ + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, /* MIX1, MIX0 */ + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, /* CTU1, CTU0 */ + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, /* DVC0, DVC1 */ <&audio_clk_a>, <&audio_clk_b>, /* CLKA, CLKB */ <&audio_clk_c>, <&audio_clk_i>; /* CLKC, CLKI */ @@ -416,6 +419,17 @@ examples: "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma0 0xbc>; @@ -448,7 +462,7 @@ examples: status = "disabled"; }; src1: src-1 { - interrupts = <0 353 0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; @@ -469,12 +483,12 @@ examples: rcar_sound,ssi { ssi0: ssi-0 { - interrupts = <0 370 1>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>; dma-names = "rx", "tx"; }; ssi1: ssi-1 { - interrupts = <0 371 1>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>; dma-names = "rx", "tx"; }; @@ -516,7 +530,6 @@ examples: }; }; - /* assume audio-graph */ codec { port { -- 2.34.1

4 3

[PATCH 0/2] soundwire: bus: Prevent infinite loop in sdw_ch_mask_to_ch()
by Richard Fitzgerald 15 Mar '23

15 Mar '23

sdw_ch_mask_to_ch() would loop forever if bit 31 of the mask was set. The entire function is unnecessary because the existing standard function hweight32() already does the same thing, and hweight32() is safe. But the change has been made in two steps. Richard Fitzgerald (2): soundwire: bus: Prevent infinite loop in sdw_ch_mask_to_ch() soundwire: bandwidth allocation: Use hweight32() to calculate set bits drivers/soundwire/bus.h | 11 ----------- drivers/soundwire/generic_bandwidth_allocation.c | 3 ++- 2 files changed, 2 insertions(+), 12 deletions(-) -- 2.30.2

3 5

[PATCH 0/7] Add the Lantiq PEF2256 audio support
by Herve Codina 15 Mar '23

15 Mar '23

Hi, This series adds support for audio using the Lantiq PEF2256 framer. The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. The first part of this series (patches 1 to 4) adds the Lantiq PEF2256 driver core. The second part (patches 5 to 7) adds the audio support using the Lantiq PEF2256 driver core. The consumer/provider relation between the codec and the driver core allows to use the PEF2256 framer for other purpose than audio support. Best regards, Herve Codina Herve Codina (7): dt-bindings: misc: Add the Lantiq PEF2466 E1/T1/J1 framer drivers: misc: Add support for the Lantiq PEF2256 framer Documentation: sysfs: Document the Lantiq PEF2256 sysfs entry MAINTAINERS: Add the Lantiq PEF2256 driver entry dt-bindings: sound: Add support for the Lantiq PEF2256 codec ASoC: codecs: Add support for the Lantiq PEF2256 codec MAINTAINERS: Add the Lantiq PEF2256 ASoC codec entry .../sysfs-bus-platform-devices-pef2256 | 10 + .../bindings/misc/lantiq,pef2256.yaml | 190 +++ .../bindings/sound/lantiq,pef2256-codec.yaml | 57 + MAINTAINERS | 15 + drivers/misc/Kconfig | 16 + drivers/misc/Makefile | 1 + drivers/misc/pef2256.c | 1441 +++++++++++++++++ include/linux/pef2256.h | 36 + sound/soc/codecs/Kconfig | 14 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/pef2256-codec.c | 395 +++++ 11 files changed, 2177 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-devices-pef2256 create mode 100644 Documentation/devicetree/bindings/misc/lantiq,pef2256.yaml create mode 100644 Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml create mode 100644 drivers/misc/pef2256.c create mode 100644 include/linux/pef2256.h create mode 100644 sound/soc/codecs/pef2256-codec.c -- 2.39.2

1 7

[PATCH] soundwire: qcom: correct setting ignore bit on v1.5.1
by Krzysztof Kozlowski 15 Mar '23

15 Mar '23

According to the comment and to downstream sources, the SWRM_CONTINUE_EXEC_ON_CMD_IGNORE in SWRM_CMD_FIFO_CFG_ADDR register should be set for v1.5.1 and newer, so fix the >= operator. Fixes: 542d3491cdd7 ("soundwire: qcom: set continue execution flag for ignored commands") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/soundwire/qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index d5b73b7f98bf..29035cf15407 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -733,7 +733,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) } /* Configure number of retries of a read/write cmd */ - if (ctrl->version > 0x01050001) { + if (ctrl->version >= 0x01050001) { /* Only for versions >= 1.5.1 */ ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, SWRM_RD_WR_CMD_RETRIES | -- 2.34.1

3 2

[PATCH] soundwire: dmi-quirks: add remapping for Intel 'Rooks County' NUC M15
by Bard Liao 15 Mar '23

15 Mar '23

From: Eugene Huang <eugene.huang99(a)gmail.com> Same DSDT problem as the HP Omen 16-k0005TX, except rt1316 amp is on link2. Link: https://github.com/thesofproject/linux/issues/4088 Signed-off-by: Eugene Huang <eugene.huang99(a)gmail.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- To support 'Rooks County', we also need the "ASOC: Intel: add quirk for Intel 'Rooks County' NUC M15" series. --- drivers/soundwire/dmi-quirks.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c index 7969881f126d..58ea013fa918 100644 --- a/drivers/soundwire/dmi-quirks.c +++ b/drivers/soundwire/dmi-quirks.c @@ -73,6 +73,23 @@ static const struct adr_remap hp_omen_16[] = { {} }; +/* + * Intel NUC M15 LAPRC510 and LAPRC710 + */ +static const struct adr_remap intel_rooks_county[] = { + /* rt711-sdca on link0 */ + { + 0x000020025d071100ull, + 0x000030025d071101ull + }, + /* rt1316-sdca on link2 */ + { + 0x000120025d071100ull, + 0x000230025d131601ull + }, + {} +}; + static const struct dmi_system_id adr_remap_quirk_table[] = { /* TGL devices */ { @@ -98,6 +115,14 @@ static const struct dmi_system_id adr_remap_quirk_table[] = { }, .driver_data = (void *)intel_tgl_bios, }, + { + /* quirk used for NUC15 'Rooks County' LAPRC510 and LAPRC710 skews */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel(R) Client Systems"), + DMI_MATCH(DMI_PRODUCT_NAME, "LAPRC"), + }, + .driver_data = (void *)intel_rooks_county, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), -- 2.25.1

2 1

[PATCH] ASoC: soc-pcm.c: remove indirect runtime copy
by Kuninori Morimoto 15 Mar '23

15 Mar '23

substream->runtime will be attached when substream was opened at snd_pcm_attach_substream(). When it uses DPCM, FE substream->runtime is attached, but BE substream->runtime is not. Thus, we are copying FE substream->runtime to BE. But, we are copyig FE substream->runtime to FE dpcm->runtime first (A), and copy it to BE dpcm->runtime (B), and copy it to BE substream->runtime (C). static int dpcm_fe_dai_open(...) { ... (A) fe->dpcm[stream].runtime = fe_substream->runtime; ... } static int dpcm_be_connect(...) { ... (B) be->dpcm[stream].runtime = fe->dpcm[stream].runtime; ... } int dpcm_be_dai_startup(...) { ... (C) be_substream->runtime = be->dpcm[stream].runtime; ... } It is too roundabout and troublesome. OTOH, it is directly copying fe_substream->runtime at dpcm_be_reparent() without using be->dpcm[stream].runtime. static void dpcm_be_reparent(...) { ... for_each_dpcm_fe(be, stream, dpcm) { ... => be_substream->runtime = fe_substream->runtime; break; } } This patch removes indirect copying. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- include/sound/soc-dpcm.h | 1 - sound/soc/soc-compress.c | 7 ------- sound/soc/soc-pcm.c | 10 ++++------ 3 files changed, 4 insertions(+), 14 deletions(-) diff --git a/include/sound/soc-dpcm.h b/include/sound/soc-dpcm.h index 1e7d09556fe3..4d6ac7699833 100644 --- a/include/sound/soc-dpcm.h +++ b/include/sound/soc-dpcm.h @@ -91,7 +91,6 @@ struct snd_soc_dpcm_runtime { struct list_head fe_clients; int users; - struct snd_pcm_runtime *runtime; struct snd_pcm_hw_params hw_params; /* state and update */ diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index e7aa6f360cab..554c329ec87f 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -134,8 +134,6 @@ static int soc_compr_open(struct snd_compr_stream *cstream) static int soc_compr_open_fe(struct snd_compr_stream *cstream) { struct snd_soc_pcm_runtime *fe = cstream->private_data; - struct snd_pcm_substream *fe_substream = - fe->pcm->streams[cstream->direction].substream; struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(fe, 0); struct snd_soc_dpcm *dpcm; struct snd_soc_dapm_widget_list *list; @@ -143,7 +141,6 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) int ret; mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME); - fe->dpcm[stream].runtime = fe_substream->runtime; ret = dpcm_path_get(fe, stream, &list); if (ret < 0) @@ -153,7 +150,6 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) /* calculate valid and active FE <-> BE dpcms */ dpcm_process_paths(fe, stream, &list, 1); - fe->dpcm[stream].runtime = fe_substream->runtime; fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; @@ -164,7 +160,6 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE; dpcm_be_disconnect(fe, stream); - fe->dpcm[stream].runtime = NULL; goto out; } @@ -236,8 +231,6 @@ static int soc_compr_free_fe(struct snd_compr_stream *cstream) mutex_unlock(&fe->card->pcm_mutex); - fe->dpcm[stream].runtime = NULL; - snd_soc_link_compr_shutdown(cstream, 0); snd_soc_compr_components_free(cstream, 0); diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 41a111586ac3..f6b5f72df65e 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1230,7 +1230,6 @@ static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe, dpcm->be = be; dpcm->fe = fe; - be->dpcm[stream].runtime = fe->dpcm[stream].runtime; dpcm->state = SND_SOC_DPCM_LINK_STATE_NEW; snd_soc_dpcm_stream_lock_irq(fe, stream); list_add(&dpcm->list_be, &fe->dpcm[stream].be_clients); @@ -1465,10 +1464,11 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream, struct snd_soc_dapm_widget_list *list = *list_; struct snd_soc_pcm_runtime *be; struct snd_soc_dapm_widget *widget; + struct snd_pcm_substream *fe_substream = snd_soc_dpcm_get_substream(fe, stream); int i, new = 0, err; /* don't connect if FE is not running */ - if (!fe->dpcm[stream].runtime && !fe->fe_compr) + if (!fe_substream->runtime && !fe->fe_compr) return new; /* Create any new FE <--> BE connections */ @@ -1590,6 +1590,7 @@ void dpcm_be_dai_stop(struct snd_soc_pcm_runtime *fe, int stream, int dpcm_be_dai_startup(struct snd_soc_pcm_runtime *fe, int stream) { + struct snd_pcm_substream *fe_substream = snd_soc_dpcm_get_substream(fe, stream); struct snd_soc_pcm_runtime *be; struct snd_soc_dpcm *dpcm; int err, count = 0; @@ -1629,7 +1630,7 @@ int dpcm_be_dai_startup(struct snd_soc_pcm_runtime *fe, int stream) dev_dbg(be->dev, "ASoC: open %s BE %s\n", stream ? "capture" : "playback", be->dai_link->name); - be_substream->runtime = be->dpcm[stream].runtime; + be_substream->runtime = fe_substream->runtime; err = __soc_pcm_open(be, be_substream); if (err < 0) { be->dpcm[stream].users--; @@ -2693,8 +2694,6 @@ static void dpcm_fe_dai_cleanup(struct snd_pcm_substream *fe_substream) dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE; dpcm_be_disconnect(fe, stream); - - fe->dpcm[stream].runtime = NULL; } static int dpcm_fe_dai_close(struct snd_pcm_substream *fe_substream) @@ -2719,7 +2718,6 @@ static int dpcm_fe_dai_open(struct snd_pcm_substream *fe_substream) int stream = fe_substream->stream; snd_soc_dpcm_mutex_lock(fe); - fe->dpcm[stream].runtime = fe_substream->runtime; ret = dpcm_path_get(fe, stream, &list); if (ret < 0) -- 2.25.1

2 1

[PATCH] ASoC: soc-dai.c: add missing flag check at snd_soc_pcm_dai_probe()
by Kuninori Morimoto 15 Mar '23

15 Mar '23

dai->probed is used at snd_soc_pcm_dai_probe/remove(), and used to call real remove() function only when it was probed. int snd_soc_pcm_dai_probe(...) { ... for_each_rtd_dais(rtd, i, dai) { ... if (dai->driver->probe) { (A) int ret = dai->driver->probe(dai); if (ret < 0) return soc_dai_ret(dai, ret); } => dai->probed = 1; } ... } int snd_soc_pcm_dai_remove(...) { ... for_each_rtd_dais(rtd, i, dai) { ... => if (dai->probed && ...) { ... } => dai->probed = 0; } ... } But on probe() case, we need to check dai->probed before calling real probe() function at (A), otherwise real probe() might be called multi times (but real remove() will be called only once). This patch checks it at probe(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/soc-dai.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/soc-dai.c b/sound/soc/soc-dai.c index 0119afbd01fc..02dd64dea179 100644 --- a/sound/soc/soc-dai.c +++ b/sound/soc/soc-dai.c @@ -542,6 +542,9 @@ int snd_soc_pcm_dai_probe(struct snd_soc_pcm_runtime *rtd, int order) if (dai->driver->probe_order != order) continue; + if (dai->probed) + continue; + if (dai->driver->probe) { int ret = dai->driver->probe(dai); -- 2.25.1

2 1

[PATCH 0/2] ASoC: mt8192: Address spammy log messages
by Nícolas F. R. A. Prado 15 Mar '23

15 Mar '23

A couple commits to make the mt8192 sound driver not spam the console. Nícolas F. R. A. Prado (2): ASoC: mt8192: Remove function name log messages ASoC: mt8192: Move spammy messages to debug level sound/soc/mediatek/mt8192/mt8192-afe-clk.c | 4 --- sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 6 +--- sound/soc/mediatek/mt8192/mt8192-dai-tdm.c | 28 +++++++++---------- .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 12 ++++---- 4 files changed, 19 insertions(+), 31 deletions(-) -- 2.39.2

3 6

libasound.so.2 segmentation fault
by GitHub issues - opened 15 Mar '23

15 Mar '23

alsa-project/alsa-lib issue #306 was opened from zmzeeshan1: The problematic frame identified in the error message is _snd_pcm_adpcm_open, which is a function within the libasound.so.2 library. This function appears to be causing the segmentation fault. See below error 1. A fatal error has been detected by the Java Runtime Environment: # 2. SIGSEGV (0xb) at pc=0x28b931ea, pid=15187, tid=371194784 # 3. JRE version: 6.0_43-b01 4. Java VM: Java HotSpot(TM) Server VM (20.14-b01 mixed mode linux-x86 ) 5. Problematic frame: 6. C [libasound.so.2+0x521ea] _snd_pcm_adpcm_open+0x2e4 # 7. If you would like to submit a bug report, please visit: 8. [http://java.sun.com/webapps/bugreport/crash.jsp](https://urldefense.com/v3/… 9. The crash happened outside the Java Virtual Machine in native code. 10. See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x1fe2b000): JavaThread "Direct Clip" daemon [_thread_in_native, id=32499, stack(0x16138000,0x16200000)] siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x00000008 Registers: EAX=0x4030a800, EBX=0x28be41b0, ECX=0x40306000, EDX=0x00000000 ESP=0x161feb60, EBP=0x161fec28, ESI=0x00000020, EDI=0x00000000 EIP=0x28b931ea, EFLAGS=0x00010206, CR2=0x00000008 Top of Stack: (sp=0x161feb60) 0x161feb60: f5400000 ffffffff 00100000 00000000 0x161feb70: 0806a900 00004092 00000001 161febb7 0x161feb80: abe85bc0 00004092 161feba8 b75f2a6c 0x161feb90: 08070e20 4ba67960 ffffff7d ffffffff 0x161feba0: 161febe0 080705e0 161febc8 b7560a65 0x161febb0: 00080000 00000000 b7a5fa88 b7a5fa88 0x161febc0: f5400000 ffffffff 161febf8 28b88c38 0x161febd0: 00000000 ffbbffca 40316002 4030a002 Instructions: (pc=0x28b931ea) 0x28b931ca: c7 45 a8 00 00 00 00 03 42 04 66 89 4d ac a8 07 0x28b931da: 0f 85 a4 05 00 00 8b 0a c1 e8 03 8b 55 0c 01 c8 0x28b931ea: 8b 4f 08 0f af d1 89 45 b4 03 57 04 f6 c2 07 0f 0x28b931fa: 85 85 05 00 00 c1 ea 03 8b 07 01 c2 f7 c6 07 00 Register to memory mapping: EAX=0x4030a800 is an unknown value EBX=0x28be41b0: <offset 0xa31b0> in /lib/libasound.so.2 at 0x28b41000 ECX=0x40306000 is an unknown value EDX=0x00000000 is an unknown value ESP=0x161feb60 is pointing into the stack for thread: 0x1fe2b000 EBP=0x161fec28 is pointing into the stack for thread: 0x1fe2b000 ESI=0x00000020 is an unknown value EDI=0x00000000 is an unknown value Stack: [0x16138000,0x16200000], sp=0x161feb60, free space=794k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [libasound.so.2+0x521ea] _snd_pcm_adpcm_open+0x2e4 C [libasound.so.2+0x54f05] _snd_pcm_adpcm_open+0x2fff C [libasound.so.2+0x55046] _snd_pcm_adpcm_open+0x3140 C [libasound.so.2+0x3fedd] short+0x7a C [libasound.so.2+0x58dec] short+0xf7 C [libasound.so.2+0x403dd] short+0x1cd C [libasound.so.2+0x58fe2] short+0x6b C [libasound.so.2+0x392df] short+0x5c C [libjsoundalsa.so+0xa54a] DAUDIO_Write+0x4a C [libjsoundalsa.so+0x77ca] Java_com_sun_media_sound_DirectAudioDevice_nWrite+0x13a j com.sun.media.sound.DirectAudioDevice.nWrite(J[BIIIFF)I+0 j com.sun.media.sound.DirectAudioDevice.access$1800(J[BIIIFF)I+11 j com.sun.media.sound.DirectAudioDevice$DirectDL.write([BII)I+202 j com.sun.media.sound.DirectAudioDevice$DirectClip.run()V+163 j java.lang.Thread.run()V+11 v ~StubRoutines::call_stub V [libjvm.so+0x3e1d61] JavaCalls::call_helper(JavaValue*, methodHandle*, JavaCallArguments*, Thread*)+0x1c1 V [libjvm.so+0x5e3558] os::os_exception_wrapper(void [https://jira1.melb.tatm.thales:8443/images/icons/emoticons/star_yellow.png(…, methodHandle*, JavaCallArguments*, Thread*), JavaValue*, methodHandle*, JavaCallArguments*, Thread*)+0x18 V [libjvm.so+0x3e15d5] JavaCalls::call_virtual(JavaValue*, KlassHandle, symbolHandle, symbolHandle, JavaCallArguments*, Thread*)+0xc5 V [libjvm.so+0x3e1698] JavaCalls::call_virtual(JavaValue*, Handle, KlassHandle, symbolHandle, symbolHandle, Thread*)+0x58 V [libjvm.so+0x4660d7] thread_entry(JavaThread*, Thread*)+0xa7 V [libjvm.so+0x6e495f] JavaThread::run()+0x11f V [libjvm.so+0x5e4dae] java_start(Thread*)+0x14e C [libpthread.so.0+0x53cc] short+0xac Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j com.sun.media.sound.DirectAudioDevice.nWrite(J[BIIIFF)I+0 j com.sun.media.sound.DirectAudioDevice.access$1800(J[BIIIFF)I+11 j com.sun.media.sound.DirectAudioDevice$DirectDL.write([BII)I+202 j com.sun.media.sound.DirectAudioDevice$DirectClip.run()V+163 j java.lang.Thread.run()V+11 v ~StubRoutines::call_stub The version of ALSA installed is alsa-lib-1.0.6-5.RHEL4.i386.rpm 28-Aug-2006 15:26 302K alsa-lib-devel-1.0.6-5.RHEL4.i386.rpm 28-Aug-2006 15:26 807K alsa-utils-1.0.6-10.i386.rpm 02-Oct-2009 15:54 125K Issue URL : https://github.com/alsa-project/alsa-lib/issues/306 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH 0/2] ASOC: Intel: add quirk for Intel 'Rooks County' NUC M15
by Bard Liao 14 Mar '23

14 Mar '23

Adding Intel 'Rooks County' NUC M15 support. To support 'Rooks County', we also need the "soundwire: dmi-quirks: add remapping for Intel 'Rooks County'" patch. Eugene Huang (2): ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15 ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15 sound/soc/intel/boards/sof_sdw.c | 11 ++++++++++ .../intel/common/soc-acpi-intel-adl-match.c | 20 +++++++++++++++++++ 2 files changed, 31 insertions(+) -- 2.25.1

2 3

[PATCH] ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
by Kuninori Morimoto 14 Mar '23

14 Mar '23

tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/pci/hda/patch_ca0132.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 0a292bf271f2..5ce4b5f62983 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -4228,8 +4228,10 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, for (i = 0; i < TUNING_CTLS_COUNT; i++) if (nid == ca0132_tuning_ctls[i].nid) - break; + goto found; + return -EINVAL; +found: snd_hda_power_up(codec); dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ca0132_tuning_ctls[i].req, -- 2.25.1

2 1

[PATCH] ALSA: asihpi: check pao in control_message()
by Kuninori Morimoto 14 Mar '23

14 Mar '23

control_message() might be called with pao = NULL. Here indicates control_message() as sample. (B) static void control_message(struct hpi_adapter_obj *pao, ...) { ^^^ struct hpi_hw_obj *phw = pao->priv; ... ^^^ } (A) void _HPI_6205(struct hpi_adapter_obj *pao, ...) { ^^^ ... case HPI_OBJ_CONTROL: (B) control_message(pao, phm, phr); break; ^^^ ... } void HPI_6205(...) { ... (A) _HPI_6205(NULL, phm, phr); ... ^^^^ } Therefore, We will get too many warning via cppcheck, like below sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer] struct hpi_hw_obj *phw = pao->priv; ^ sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0 _HPI_6205(NULL, phm, phr); ^ sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0 control_message(pao, phm, phr); ^ Set phr->error like many functions doing, and don't call _HPI_6205() with NULL. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/pci/asihpi/hpi6205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c index 27e11b5f70b9..c7d7eff86727 100644 --- a/sound/pci/asihpi/hpi6205.c +++ b/sound/pci/asihpi/hpi6205.c @@ -430,7 +430,7 @@ void HPI_6205(struct hpi_message *phm, struct hpi_response *phr) pao = hpi_find_adapter(phm->adapter_index); } else { /* subsys messages don't address an adapter */ - _HPI_6205(NULL, phm, phr); + phr->error = HPI_ERROR_INVALID_OBJ_INDEX; return; } -- 2.25.1

2 1

[PATCH] sound: usb: remove Wireless USB dead code
by Ruslan Bilovol 14 Mar '23

14 Mar '23

Wireless USB host controller support has been removed from Linux Kernel more than 3 years ago in commit caa6772db4c1 ("Staging: remove wusbcore and UWB from the kernel tree."), and the associated code in the snd-usb-audio driver became unused and untested. If in the future somebody will return WUSB/UWB support back to the kernel, the snd-usb-audio driver will reject Wireless USB audio devices at probe stage, and this patch should be reverted. Signed-off-by: Ruslan Bilovol <ruslan.bilovol(a)gmail.com> --- sound/usb/card.c | 1 - sound/usb/endpoint.c | 16 +--------------- sound/usb/helper.c | 1 - 3 files changed, 1 insertion(+), 17 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index 26268ffb8274..f6e99ced8068 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -609,7 +609,6 @@ static int snd_usb_audio_create(struct usb_interface *intf, case USB_SPEED_LOW: case USB_SPEED_FULL: case USB_SPEED_HIGH: - case USB_SPEED_WIRELESS: case USB_SPEED_SUPER: case USB_SPEED_SUPER_PLUS: break; diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 419302e2057e..1e0af1179ca8 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -1173,22 +1173,8 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep) */ if (usb_pipein(ep->pipe) || ep->implicit_fb_sync) { - urb_packs = packs_per_ms; - /* - * Wireless devices can poll at a max rate of once per 4ms. - * For dataintervals less than 5, increase the packet count to - * allow the host controller to use bursting to fill in the - * gaps. - */ - if (snd_usb_get_speed(chip->dev) == USB_SPEED_WIRELESS) { - int interval = ep->datainterval; - while (interval < 5) { - urb_packs <<= 1; - ++interval; - } - } /* make capture URBs <= 1 ms and smaller than a period */ - urb_packs = min(max_packs_per_urb, urb_packs); + urb_packs = min(max_packs_per_urb, packs_per_ms); while (urb_packs > 1 && urb_packs * maxsize >= ep->cur_period_bytes) urb_packs >>= 1; ep->nurbs = MAX_URBS; diff --git a/sound/usb/helper.c b/sound/usb/helper.c index a4410267bf70..bf80e55d013a 100644 --- a/sound/usb/helper.c +++ b/sound/usb/helper.c @@ -108,7 +108,6 @@ unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip, { switch (snd_usb_get_speed(chip->dev)) { case USB_SPEED_HIGH: - case USB_SPEED_WIRELESS: case USB_SPEED_SUPER: case USB_SPEED_SUPER_PLUS: if (get_endpoint(alts, 0)->bInterval >= 1 && -- 2.39.2

2 1

[PATCH] ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm
by Shengjiu Wang 14 Mar '23

14 Mar '23

The hw->formats may be set by snd_dmaengine_pcm_refine_runtime_hwparams() in component's startup()/open(), but soc_pcm_hw_init() will init hw->formats in dpcm_runtime_setup_fe() after component's startup()/open(), which causes the valuable hw->formats to be cleared. So need to store the hw->formats before initialization, then restore it after initialization. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/soc-pcm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 5eb056b942ce..7958c9defd49 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1661,10 +1661,14 @@ static void dpcm_runtime_setup_fe(struct snd_pcm_substream *substream) struct snd_pcm_hardware *hw = &runtime->hw; struct snd_soc_dai *dai; int stream = substream->stream; + u64 formats = hw->formats; int i; soc_pcm_hw_init(hw); + if (formats) + hw->formats &= formats; + for_each_rtd_cpu_dais(fe, i, dai) { struct snd_soc_pcm_stream *cpu_stream; -- 2.34.1

4 4

[PATCH v1] ASoC: Intel: sof_rt5682: Enable Bluetooth offload on adl_rt1019_rt5682
by Ajye Huang 14 Mar '23

14 Mar '23

Enable Bluetooth audio offload for drv_name "adl_rt1019_rt5682" with following board configuration specifically: SSP0 - rt5682 Headset SSP1 - alc1019p speaker amp SSP2 - Bluetooth audio Signed-off-by: Ajye Huang <ajye_huang(a)compal.corp-partner.google.com> Signed-off-by: Mac Chiang <mac.chiang(a)intel.com> --- sound/soc/intel/boards/sof_rt5682.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c index 4fe448295a90..2eec32846078 100644 --- a/sound/soc/intel/boards/sof_rt5682.c +++ b/sound/soc/intel/boards/sof_rt5682.c @@ -1109,7 +1109,9 @@ static const struct platform_device_id board_ids[] = { SOF_SPEAKER_AMP_PRESENT | SOF_RT1019_SPEAKER_AMP_PRESENT | SOF_RT5682_SSP_AMP(1) | - SOF_RT5682_NUM_HDMIDEV(4)), + SOF_RT5682_NUM_HDMIDEV(4) | + SOF_BT_OFFLOAD_SSP(2) | + SOF_SSP_BT_OFFLOAD_PRESENT), }, { .name = "mtl_mx98357_rt5682", -- 2.25.1

3 6

[PATCH 00/11] ASoC: SOF: ipc4: Add support for formats per pins
by Peter Ujfalusi 14 Mar '23

14 Mar '23

Hi, The modules in IPC4 can have multiple 'pins' on their input and output and these pins can receive or output audio in different formats. Currently we assume that all pins are using the same format which is a limitation that needs to be lifted in order to support more complex components. This series will extend and rework the format handling to allow different formats on pins. Regards, Peter --- Ranjani Sridharan (11): ASoC: SOF: rename a couple of tokens ASoC: SOF: Use input/output pin consistently ASoC: SOF: ipc4-topology: Add a new field in struct sof_ipc4_available_audio_format ASoC: SOF: ipc4-topology: Do not parse the DMA_BUFFER_SIZE token ASoC: SOF: ipc4-topology: Parse the SOF_COMP_TOKENS only once ASoC: SOF: ipc4-topology: Always parse the output formats in topology ASoC: SOF: ipc4-topology: Modify the type of available input/output formats ASoC: SOF: ipc4-topology: Modify the signature of sof_ipc4_init_audio_fmt() ASoC: SOF: ipc4-topology: Remove the ref_audio_fmt field ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count ASoC: SOF: ipc4-topology: Search only pin 0 formats include/uapi/sound/sof/tokens.h | 20 +- sound/soc/sof/ipc4-pcm.c | 2 +- sound/soc/sof/ipc4-topology.c | 529 +++++++++++++++----------------- sound/soc/sof/ipc4-topology.h | 36 ++- sound/soc/sof/sof-audio.h | 35 +-- sound/soc/sof/topology.c | 124 ++++---- 6 files changed, 371 insertions(+), 375 deletions(-) -- 2.39.2

2 12

[PATCH 0/7] ASoC: SOF: ipc4: Add support for bytes control
by Peter Ujfalusi 14 Mar '23

14 Mar '23

Hi, This series will add support for bytes control and topology types. With IPC4 only the binary payload is sent to the firmware via LARGE_CONFIG message (which does similar multi-part message handling as the IPC3 control message did). The bytes payload itself is not checked by the kernel but user space expected to wrap it in sof_abi_hdr struct in order to get the target information of the binary data. The SOF firmware and sof-ctl have been updated to support blobs used in IPC4 setups. Regards, Peter --- Libin Yang (2): ASoC: SOF: ipc4-control: set_volume_data only applies to VOLSW family ASoC: SOF: ipc4-topology: Add support for TPLG_CTL_BYTES Peter Ujfalusi (5): ASoC: SOF: ipc3-control: Rename snd_sof_refresh_control() ASoC: SOF: ipc3-control: Merge functions to handle bytes_ext get variants ASoC: SOF: uapi: header: Convert sof_abi_hdr comments to kernel style ASoC: SOF: uapi: header: Update sof_abi_hdr doc for IPC4 use ASoC: SOF: ipc4-control: Add support for bytes control get and put include/uapi/sound/sof/abi.h | 2 + include/uapi/sound/sof/header.h | 27 +++- sound/soc/sof/ipc3-control.c | 90 ++++------- sound/soc/sof/ipc4-control.c | 260 +++++++++++++++++++++++++++++++- sound/soc/sof/ipc4-topology.c | 67 ++++++++ 5 files changed, 368 insertions(+), 78 deletions(-) -- 2.39.2

2 8

dpcm_be_connect: FE is atomic but BE is nonatomic, invalid configuration
by Daniel Baluta 14 Mar '23

14 Mar '23

Hi Morimoto-san, I would like to know your take on the following issue. On I.MX with SOF we use simple-card and hit the following error: sai1-wm8960-hifi: dpcm_be_connect: FE is atomic but BE is nonatomic, invalid configuration and I think it makes sense to have the BE nonatomic as set by SOF core. In order to fix this, we need to make FE nonatomic too. But FE is handled by simple-card and it doesn't set .nonatomic field leaving it as default (.nonatomic = 0). How do you think we can update this field? Would a DT property be good enough? thanks, Daniel.

2 2

Tegra: add UCM configuration for RT5631, WM8903 and MAX98089 based devices
by GitHub pull_request - edited 14 Mar '23

14 Mar '23

alsa-project/alsa-ucm-conf pull request #291 was edited from clamor-s: Proposed UCM configurations were tested for a while on wide range of devices. Did not cause any issues so far. List of supported devices using RT5631: - ASUS TF201 - ASUS TF300TG - ASUS TF300TL - ASUS TF700T using WM8903: - ASUS TF101 - ASUS SL101 - ASUS TF300T using MAX98089 - LG P880 - LG P895 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/291 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/291.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Tegra: add UCM configuration for RT5631, WM8903 and MAX98089 based devices
by GitHub pull_request - edited 14 Mar '23

14 Mar '23

alsa-project/alsa-ucm-conf pull request #291 was edited from clamor-s: Proposed UCM configurations were tested for a while on wide range of devices. Did not cause any issues so far. List of supported devices using RT5631: - ASUS TF201 - ASUS TF300TG - ASUS TF300TL - ASUS TF700T using WM8903: - ASUS TF101 - ASUS TF300T using MAX98089 - LG P880 - LG P895 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/291 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/291.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Tegra: add UCM configuration for RT5631, WM8903 and MAX98089 based devices
by GitHub pull_request - edited 14 Mar '23

14 Mar '23

alsa-project/alsa-ucm-conf pull request #291 was edited from clamor-s: Proposed UCM configurations were tested for a while on wide range of devices. Did not cause any issues so far. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/291 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/291.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH V7 0/8] Add SoundWire support for AMD platforms
by Vijendar Mukunda 14 Mar '23

14 Mar '23

ACP IP(v6.x) block has two SoundWire manager instance support. This patchset adds support for AMD SoundWire manager driver. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> changes since v6: - remove pm suspend check in amd_resume_child_device() and always return 0. - use same name convention for command and response variables. changes since v5: - replace loops logic with read_poll_timeout() throughout the code. changes since v4: - fix nit-picks in the code. - update naming convention for control word and response buffer vairables. - drop pm_suspend check in prepare callback. - use return statement instead of returning ret variable. changes since v3: - add usleep_range() in command/response implementation. - add usleep_range() in clock stop sequence. - modify usleep_range() values throughout the code. - remove unncessary debug statement from code. - update comment in probe() call. - fix timeout condition checks in the code. - drop "ret" variable in amd_disable_sdw_manager(). changes since v2: - Remove useless variable initializations. - Add helper function to interpret peripheral status. - Move runtime pm sequence to probe_work workqueue. - Use string "SoundWire" instead of "soundwire" in code. - Update comments in interrupt handler and probe sequence. - Rename "sdw_lock" as "acp_sdw_lock". - Remove __func__ from dev_dbg statements. changes since v1: - Drop asoc tree based patches. will send asoc patches as a separate series. - Fixed double space errors. - Use dev instead of pci->dev. - Use SoundWire manager terminology. - Remove amd_sdw_compute_slave_ports() function and use exported sdw_compute_slave_ports() function. - Remove unused variable "num_ports" from amd_manager structure. - Drop startup and shutdown dai callbacks. - Drop reset_page_addr callback. - Use relative address offset to program SoundWire manager registers throughout the code. - Separate wake enable interrupt handling from slave status handling logic. - Use acp_mmio to program ACP common registers. - Use dai_runtime_array implementation in dai_ops. - Refactor port_ops callbacks. - Add comments in port_ops callbacks. - Add retry count logic in irq thread to address faulty case. - Add helper function to interpret command response. - Add generic bandwidth allocation dependency in Kconfig options. - Add comments for AMD SoundWire power modes. - Add missing timeout check in amd_init_sdw_manager callback. - Declare frameshape parameters in probe call. - Handle error case in clock stop sequence. - Add comments in pm_prepare and pm_ops callbacks. Vijendar Mukunda (8): soundwire: export sdw_compute_slave_ports() function soundwire: amd: Add support for AMD Manager driver soundwire: amd: register SoundWire manager dai ops soundwire: amd: enable build for AMD SoundWire manager driver soundwire: amd: add SoundWire manager interrupt handling soundwire: amd: add runtime pm ops for AMD SoundWire manager driver soundwire: amd: handle SoundWire wake enable interrupt soundwire: amd: add pm_prepare callback and pm ops support drivers/soundwire/Kconfig | 10 + drivers/soundwire/Makefile | 4 + drivers/soundwire/amd_manager.c | 1244 +++++++++++++++++ drivers/soundwire/amd_manager.h | 274 ++++ drivers/soundwire/bus.h | 9 + .../soundwire/generic_bandwidth_allocation.c | 12 +- include/linux/soundwire/sdw_amd.h | 109 ++ 7 files changed, 1653 insertions(+), 9 deletions(-) create mode 100644 drivers/soundwire/amd_manager.c create mode 100644 drivers/soundwire/amd_manager.h create mode 100644 include/linux/soundwire/sdw_amd.h -- 2.34.1

3 12

[PATCH 1/3] ASoC: dt-bindings: wlf,wm8960: Convert to dtschema
by Krzysztof Kozlowski 14 Mar '23

14 Mar '23

Convert the Wolfson WM8960 audio codecs bindings to DT schema. Changes against original binding: 1. Document clocks and clock-names - already present in DTS and used by Linux driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- One DTS warning still remains: uniphier-pxs2-gentil.dtb: wm8960@1a: Unevaluated properties are not allowed ('port@0' was unexpected) I am not sure if this is correct usage of endpoints. I would assume the codec should be used only as DAI. --- .../devicetree/bindings/sound/wlf,wm8960.yaml | 88 +++++++++++++++++++ .../devicetree/bindings/sound/wm8960.txt | 42 --------- 2 files changed, 88 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8960.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8960.txt diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml new file mode 100644 index 000000000000..ee8eba7f0104 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8960.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8960 audio codec + +maintainers: + - patches(a)opensource.cirrus.com + +properties: + compatible: + const: wlf,wm8960 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + '#sound-dai-cells': + const: 0 + + wlf,capless: + type: boolean + description: + If present, OUT3 pin will be enabled and disabled together with HP_L and + HP_R pins in response to jack detect events. + + wlf,gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: | + A list of GPIO configuration register values. + - gpio-cfg[0]: ALRCGPIO of R9 (Audio interface) + - gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4). + + wlf,hp-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 3 + description: | + A list of headphone jack detect configuration register values: + - hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4). + - hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2). + - hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1). + + wlf,shared-lrclk: + type: boolean + description: + If present, the LRCM bit of R24 (Additional control 2) gets set, + indicating that ADCLRC and DACLRC pins will be disabled only when ADC + (Left and Right) and DAC (Left and Right) are disabled. + When WM8960 works on synchronize mode and DACLRC pin is used to supply + frame clock, it will no frame clock for captrue unless enable DAC to + enable DACLRC pin. If shared-lrclk is present, no need to enable DAC for + captrue. + +required: + - compatible + - reg + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clks 0>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + wlf,hp-cfg = <3 2 3>; + wlf,gpio-cfg = <1 3>; + wlf,shared-lrclk; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8960.txt b/Documentation/devicetree/bindings/sound/wm8960.txt deleted file mode 100644 index 85d3b287108c..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8960.txt +++ /dev/null @@ -1,42 +0,0 @@ -WM8960 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "wlf,wm8960" - - - reg : the I2C address of the device. - -Optional properties: - - wlf,shared-lrclk: This is a boolean property. If present, the LRCM bit of - R24 (Additional control 2) gets set, indicating that ADCLRC and DACLRC pins - will be disabled only when ADC (Left and Right) and DAC (Left and Right) - are disabled. - When wm8960 works on synchronize mode and DACLRC pin is used to supply - frame clock, it will no frame clock for captrue unless enable DAC to enable - DACLRC pin. If shared-lrclk is present, no need to enable DAC for captrue. - - - wlf,capless: This is a boolean property. If present, OUT3 pin will be - enabled and disabled together with HP_L and HP_R pins in response to jack - detect events. - - - wlf,hp-cfg: A list of headphone jack detect configuration register values. - The list must be 3 entries long. - hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4). - hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2). - hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1). - - - wlf,gpio-cfg: A list of GPIO configuration register values. - The list must be 2 entries long. - gpio-cfg[0]: ALRCGPIO of R9 (Audio interface) - gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4). - -Example: - -wm8960: codec@1a { - compatible = "wlf,wm8960"; - reg = <0x1a>; - - wlf,shared-lrclk; -}; -- 2.34.1

5 7

[PATCH v2 1/5] ASoC: cs35l45: Support for GPIO pins configuration.
by Vlad Karpovich 13 Mar '23

13 Mar '23

From: "Vlad.Karpovich" <vkarpovi(a)opensource.cirrus.com> Adds device tree configuration for cs35l45 GPIOs Signed-off-by: Vlad Karpovich <vkarpovi(a)opensource.cirrus.com> --- include/dt-bindings/sound/cs35l45.h | 57 +++++++++++++++++++++++++++++ sound/soc/codecs/cs35l45-tables.c | 14 +++++++ sound/soc/codecs/cs35l45.c | 56 ++++++++++++++++++++++++++++ sound/soc/codecs/cs35l45.h | 27 +++++++++++++- 4 files changed, 152 insertions(+), 2 deletions(-) diff --git a/include/dt-bindings/sound/cs35l45.h b/include/dt-bindings/sound/cs35l45.h index 076da4b2c28d..25386af18445 100644 --- a/include/dt-bindings/sound/cs35l45.h +++ b/include/dt-bindings/sound/cs35l45.h @@ -17,4 +17,61 @@ #define CS35L45_ASP_TX_HIZ_UNUSED 0x1 #define CS35L45_ASP_TX_HIZ_DISABLED 0x2 +/* + * Optional GPIOX Sub-nodes: + * The cs35l45 node can have up to three "cirrus,gpio-ctrlX" ('X' = [1,2,3]) + * sub-nodes for configuring the GPIO pins. + * + * - gpio-dir : GPIO pin direction. Valid only when 'gpio-ctrl' + * is 1. + * 0 = Output + * 1 = Input (Default) + * + * - gpio-lvl : GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0. + * + * 0 = Low (Default) + * 1 = High + * + * - gpio-op-cfg : GPIO output configuration. Valid only when 'gpio-ctrl' is 1 + * and 'gpio-dir' is 0. + * + * 0 = CMOS (Default) + * 1 = Open Drain + * + * - gpio-pol : GPIO output polarity select. Valid only when 'gpio-ctrl' is 1 + * and 'gpio-dir' is 0. + * + * 0 = Non-inverted, Active High (Default) + * 1 = Inverted, Active Low + * + * - gpio-invert : Defines the polarity of the GPIO pin if configured + * as input. + * + * 0 = Not inverted (Default) + * 1 = Inverted + * + * - gpio-ctrl : Defines the function of the GPIO pin. + * + * GPIO1: + * 0 = High impedance input (Default) + * 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' + * 2 = Pin acts as MDSYNC, direction controlled by MDSYNC + * 3-7 = Reserved + * + * GPIO2: + * 0 = High impedance input (Default) + * 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' + * 2 = Pin acts as open drain INT + * 3 = Reserved + * 4 = Pin acts as push-pull output INT. Active low. + * 5 = Pin acts as push-pull output INT. Active high. + * 6,7 = Reserved + * + * GPIO3: + * 0 = High impedance input (Default) + * 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' + * 2-7 = Reserved + */ +#define CS35L45_NUM_GPIOS 0x3 + #endif /* DT_CS35L45_H */ diff --git a/sound/soc/codecs/cs35l45-tables.c b/sound/soc/codecs/cs35l45-tables.c index 5a2c2e684ef9..bca7e830821f 100644 --- a/sound/soc/codecs/cs35l45-tables.c +++ b/sound/soc/codecs/cs35l45-tables.c @@ -43,6 +43,9 @@ EXPORT_SYMBOL_NS_GPL(cs35l45_apply_patch, SND_SOC_CS35L45_TABLES); static const struct reg_default cs35l45_defaults[] = { { CS35L45_BLOCK_ENABLES, 0x00003323 }, { CS35L45_BLOCK_ENABLES2, 0x00000010 }, + { CS35L45_SYNC_GPIO1, 0x00000007 }, + { CS35L45_INTB_GPIO2_MCLK_REF, 0x00000005 }, + { CS35L45_GPIO3, 0x00000005 }, { CS35L45_REFCLK_INPUT, 0x00000510 }, { CS35L45_GLOBAL_SAMPLE_RATE, 0x00000003 }, { CS35L45_ASP_ENABLES1, 0x00000000 }, @@ -61,6 +64,9 @@ static const struct reg_default cs35l45_defaults[] = { { CS35L45_ASPTX4_INPUT, 0x00000028 }, { CS35L45_ASPTX5_INPUT, 0x00000048 }, { CS35L45_AMP_PCM_CONTROL, 0x00100000 }, + { CS35L45_GPIO1_CTRL1, 0x81000001 }, + { CS35L45_GPIO2_CTRL1, 0x81000001 }, + { CS35L45_GPIO3_CTRL1, 0x81000001 }, }; static bool cs35l45_readable_reg(struct device *dev, unsigned int reg) @@ -72,6 +78,9 @@ static bool cs35l45_readable_reg(struct device *dev, unsigned int reg) case CS35L45_BLOCK_ENABLES: case CS35L45_BLOCK_ENABLES2: case CS35L45_ERROR_RELEASE: + case CS35L45_SYNC_GPIO1: + case CS35L45_INTB_GPIO2_MCLK_REF: + case CS35L45_GPIO3: case CS35L45_REFCLK_INPUT: case CS35L45_GLOBAL_SAMPLE_RATE: case CS35L45_ASP_ENABLES1: @@ -92,6 +101,10 @@ static bool cs35l45_readable_reg(struct device *dev, unsigned int reg) case CS35L45_AMP_PCM_CONTROL: case CS35L45_AMP_PCM_HPF_TST: case CS35L45_IRQ1_EINT_4: + case CS35L45_GPIO_STATUS1: + case CS35L45_GPIO1_CTRL1: + case CS35L45_GPIO2_CTRL1: + case CS35L45_GPIO3_CTRL1: return true; default: return false; @@ -107,6 +120,7 @@ static bool cs35l45_volatile_reg(struct device *dev, unsigned int reg) case CS35L45_ERROR_RELEASE: case CS35L45_AMP_PCM_HPF_TST: /* not cachable */ case CS35L45_IRQ1_EINT_4: + case CS35L45_GPIO_STATUS1: return true; default: return false; diff --git a/sound/soc/codecs/cs35l45.c b/sound/soc/codecs/cs35l45.c index d15b3b77c7eb..901f3647fbda 100644 --- a/sound/soc/codecs/cs35l45.c +++ b/sound/soc/codecs/cs35l45.c @@ -536,7 +536,63 @@ static int __maybe_unused cs35l45_runtime_resume(struct device *dev) static int cs35l45_apply_property_config(struct cs35l45_private *cs35l45) { + struct device_node *node = cs35l45->dev->of_node; + unsigned int gpio_regs[] = {CS35L45_GPIO1_CTRL1, CS35L45_GPIO2_CTRL1, + CS35L45_GPIO3_CTRL1}; + unsigned int pad_regs[] = {CS35L45_SYNC_GPIO1, + CS35L45_INTB_GPIO2_MCLK_REF, CS35L45_GPIO3}; + struct device_node *child; unsigned int val; + char of_name[32]; + int ret, i; + + if (!node) + return 0; + + for (i = 0; i < CS35L45_NUM_GPIOS; i++) { + sprintf(of_name, "cirrus,gpio-ctrl%d", i + 1); + child = of_get_child_by_name(node, of_name); + if (!child) + continue; + + ret = of_property_read_u32(child, "gpio-dir", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_DIR_MASK, + val << CS35L45_GPIO_DIR_SHIFT); + + ret = of_property_read_u32(child, "gpio-lvl", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_LVL_MASK, + val << CS35L45_GPIO_LVL_SHIFT); + + ret = of_property_read_u32(child, "gpio-op-cfg", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_OP_CFG_MASK, + val << CS35L45_GPIO_OP_CFG_SHIFT); + + ret = of_property_read_u32(child, "gpio-pol", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_POL_MASK, + val << CS35L45_GPIO_POL_SHIFT); + + ret = of_property_read_u32(child, "gpio-ctrl", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, pad_regs[i], + CS35L45_GPIO_CTRL_MASK, + val << CS35L45_GPIO_CTRL_SHIFT); + + ret = of_property_read_u32(child, "gpio-invert", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, pad_regs[i], + CS35L45_GPIO_INVERT_MASK, + val << CS35L45_GPIO_INVERT_SHIFT); + + of_node_put(child); + } if (device_property_read_u32(cs35l45->dev, "cirrus,asp-sdout-hiz-ctrl", &val) == 0) { diff --git a/sound/soc/codecs/cs35l45.h b/sound/soc/codecs/cs35l45.h index 53fe9d2b7b15..f3a54fc57d53 100644 --- a/sound/soc/codecs/cs35l45.h +++ b/sound/soc/codecs/cs35l45.h @@ -14,6 +14,7 @@ #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <dt-bindings/sound/cs35l45.h> #define CS35L45_DEVID 0x00000000 #define CS35L45_REVID 0x00000004 @@ -24,6 +25,9 @@ #define CS35L45_BLOCK_ENABLES 0x00002018 #define CS35L45_BLOCK_ENABLES2 0x0000201C #define CS35L45_ERROR_RELEASE 0x00002034 +#define CS35L45_SYNC_GPIO1 0x00002430 +#define CS35L45_INTB_GPIO2_MCLK_REF 0x00002434 +#define CS35L45_GPIO3 0x00002438 #define CS35L45_REFCLK_INPUT 0x00002C04 #define CS35L45_GLOBAL_SAMPLE_RATE 0x00002C0C #define CS35L45_BOOST_CCM_CFG 0x00003808 @@ -48,8 +52,11 @@ #define CS35L45_AMP_PCM_CONTROL 0x00007000 #define CS35L45_AMP_PCM_HPF_TST 0x00007004 #define CS35L45_IRQ1_EINT_4 0x0000E01C -#define CS35L45_LASTREG 0x0000E01C - +#define CS35L45_GPIO_STATUS1 0x0000F000 +#define CS35L45_GPIO1_CTRL1 0x0000F008 +#define CS35L45_GPIO2_CTRL1 0x0000F00C +#define CS35L45_GPIO3_CTRL1 0x0000F010 +#define CS35L45_LASTREG 0x0000F010 /* SFT_RESET */ #define CS35L45_SOFT_RESET_TRIGGER 0x5A000000 @@ -165,6 +172,22 @@ #define CS35L45_OTP_BOOT_DONE_STS_MASK BIT(1) #define CS35L45_OTP_BUSY_MASK BIT(0) +/* GPIOX_CTRL1 */ +#define CS35L45_GPIO_DIR_SHIFT 31 +#define CS35L45_GPIO_DIR_MASK BIT(31) +#define CS35L45_GPIO_LVL_SHIFT 15 +#define CS35L45_GPIO_LVL_MASK BIT(15) +#define CS35L45_GPIO_OP_CFG_SHIFT 14 +#define CS35L45_GPIO_OP_CFG_MASK BIT(14) +#define CS35L45_GPIO_POL_SHIFT 12 +#define CS35L45_GPIO_POL_MASK BIT(12) + +/* SYNC_GPIO1, INTB_GPIO2_MCLK_REF, GPIO3 */ +#define CS35L45_GPIO_CTRL_SHIFT 20 +#define CS35L45_GPIO_CTRL_MASK GENMASK(22, 20) +#define CS35L45_GPIO_INVERT_SHIFT 19 +#define CS35L45_GPIO_INVERT_MASK BIT(19) + /* Mixer sources */ #define CS35L45_PCM_SRC_MASK 0x7F #define CS35L45_PCM_SRC_ZERO 0x00 -- 2.25.1

2 9

[PATCH 1/9] ASoC: qcom: lpass-sc7280: Drop of_match_ptr for ID table
by Krzysztof Kozlowski 13 Mar '23

13 Mar '23

The driver is specific to ARCH_QCOM which depends on OF thus the driver is OF-only. Its of_device_id table is built unconditionally, thus of_match_ptr() for ID table does not make sense. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/lpass-sc7280.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/lpass-sc7280.c b/sound/soc/qcom/lpass-sc7280.c index d43f480cbae3..956b974e322e 100644 --- a/sound/soc/qcom/lpass-sc7280.c +++ b/sound/soc/qcom/lpass-sc7280.c @@ -443,7 +443,7 @@ MODULE_DEVICE_TABLE(of, sc7280_lpass_cpu_device_id); static struct platform_driver sc7280_lpass_cpu_platform_driver = { .driver = { .name = "sc7280-lpass-cpu", - .of_match_table = of_match_ptr(sc7280_lpass_cpu_device_id), + .of_match_table = sc7280_lpass_cpu_device_id, .pm = &sc7280_lpass_pm_ops, }, .probe = asoc_qcom_lpass_cpu_platform_probe, -- 2.34.1

2 11

[PATCH] ASoC: SOF: sof-audio: add support for setting up loopback routes
by Peter Ujfalusi 13 Mar '23

13 Mar '23

From: Chao Song <chao.song(a)linux.intel.com> During route setup, playback stream routes are setup by going through sink path, capture stream routes are set up by going through source path. This is not sufficient to handle loopback cases between pipelines configured with different directions, e.g. a sidetone or an amplifier feedback connected to a speaker protection module. So, add the logic to handle such routes between widgets that aren't in the list of DAPM widgets associated with the same PCM. Link: https://github.com/thesofproject/linux/issues/4042 Suggested-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Signed-off-by: Chao Song <chao.song(a)linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/sof/sof-audio.c | 61 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 60 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/sof-audio.c b/sound/soc/sof/sof-audio.c index 6de388a8d0b8..4f12e137ff63 100644 --- a/sound/soc/sof/sof-audio.c +++ b/sound/soc/sof/sof-audio.c @@ -280,9 +280,11 @@ int sof_route_setup(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget *wsourc static int sof_setup_pipeline_connections(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget_list *list, int dir) { + const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); struct snd_soc_dapm_widget *widget; + struct snd_sof_route *sroute; struct snd_soc_dapm_path *p; - int ret; + int ret = 0; int i; /* @@ -325,6 +327,63 @@ static int sof_setup_pipeline_connections(struct snd_sof_dev *sdev, } } + /* + * The above loop handles connections between widgets that belong to the DAPM widget list. + * This is not sufficient to handle loopback cases between pipelines configured with + * different directions, e.g. a sidetone or an amplifier feedback connected to a speaker + * protection module. + */ + list_for_each_entry(sroute, &sdev->route_list, list) { + bool src_widget_in_dapm_list, sink_widget_in_dapm_list; + struct snd_sof_widget *swidget; + + if (sroute->setup) + continue; + + src_widget_in_dapm_list = widget_in_list(list, sroute->src_widget->widget); + sink_widget_in_dapm_list = widget_in_list(list, sroute->sink_widget->widget); + + /* + * if both source and sink are in the DAPM list, the route must already have been + * set up above. And if neither are in the DAPM list, the route shouldn't be + * handled now. + */ + if (src_widget_in_dapm_list == sink_widget_in_dapm_list) + continue; + + /* + * At this point either the source widget or the sink widget is in the DAPM list + * with a route that might need to be set up. Check the use_count of the widget + * that is not in the DAPM list to confirm if it is in use currently before setting + * up the route. + */ + if (src_widget_in_dapm_list) + swidget = sroute->sink_widget; + else + swidget = sroute->src_widget; + + mutex_lock(&swidget->setup_mutex); + if (!swidget->use_count) { + mutex_unlock(&swidget->setup_mutex); + continue; + } + + if (tplg_ops && tplg_ops->route_setup) { + /* + * this route will get freed when either the source widget or the sink + * widget is freed during hw_free + */ + ret = tplg_ops->route_setup(sdev, sroute); + if (!ret) + sroute->setup = true; + } + + mutex_unlock(&swidget->setup_mutex); + + if (ret < 0) + return ret; + } + return 0; } -- 2.39.2

2 1

[PATCH] ASoC: SMA1303: set sma_i2c_regmap storage-class-specifier to static
by Tom Rix 13 Mar '23

13 Mar '23

smatch reports sound/soc/codecs/sma1303.c:1594:28: warning: symbol 'sma_i2c_regmap' was not declared. Should it be static? sma_i2c_regmap is only used in sma1303, so it should be static Signed-off-by: Tom Rix <trix(a)redhat.com> --- sound/soc/codecs/sma1303.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/sma1303.c b/sound/soc/codecs/sma1303.c index fa4b0a60f8a9..b6c132edf3bd 100644 --- a/sound/soc/codecs/sma1303.c +++ b/sound/soc/codecs/sma1303.c @@ -1591,7 +1591,7 @@ static const struct snd_soc_component_driver sma1303_component = { .num_dapm_routes = ARRAY_SIZE(sma1303_audio_map), }; -const struct regmap_config sma_i2c_regmap = { +static const struct regmap_config sma_i2c_regmap = { .reg_bits = 8, .val_bits = 8, -- 2.27.0

2 1

[PATCH 0/4] ASoC: mediatek: fix coverity problems
by Trevor Wu 13 Mar '23

13 Mar '23

Coverity reports some UNINIT and CERT STR31-C problems, so we add initialization and dai id check to resolve problems. Trevor Wu (4): ASoC: mediatek: mt8195: add dai id check before accessing array ASoC: mediatek: mt9195-mt6359: fix UNINIT problem ASoC: mediatek: mt6358: fix UNINIT problem ASoC: mediatek: mt6359: fix UNINIT problem sound/soc/codecs/mt6358.c | 2 +- sound/soc/codecs/mt6359.c | 2 +- sound/soc/mediatek/mt8195/mt8195-dai-adda.c | 17 +- sound/soc/mediatek/mt8195/mt8195-dai-etdm.c | 177 +++++++++++++++++--- sound/soc/mediatek/mt8195/mt8195-dai-pcm.c | 26 ++- sound/soc/mediatek/mt8195/mt8195-mt6359.c | 2 +- 6 files changed, 188 insertions(+), 38 deletions(-) -- 2.18.0

2 5

[PATCH V5 00/15] spi: Add support for stacked/parallel memories
by Amit Kumar Mahapatra 13 Mar '23

13 Mar '23

This patch is in the continuation to the discussions which happened on 'commit f89504300e94 ("spi: Stacked/parallel memories bindings")' for adding dt-binding support for stacked/parallel memories. This patch series updated the spi-nor, spi core and the spi drivers to add stacked and parallel memories support. The first patch https://lore.kernel.org/all/20230119185342.2093323-1-amit.kumar-mahapatra@a… of the previous series got applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next But the rest of the patches in the series did not get applied due to merge conflict, so send the remaining patches in the series after rebasing it on top of for-next branch. --- BRANCH: for-next Changes in v5: - Rebased the patches on top of v6.3-rc1 and fixed the merge conflicts. - Fixed compilation warnings in spi-sh-msiof.c with shmobile_defconfig Changes in v4: - Fixed build error in spi-pl022.c file - reported by Mark. - Fixed build error in spi-sn-f-ospi.c file. - Added Reviewed-by: Serge Semin <fancer.lancer(a)gmail.com> tag. - Added two more patches to replace spi->chip_select with API calls in mpc832x_rdb.c & cs35l41_hda_spi.c files. Changes in v3: - Rebased the patches on top of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next - Added a patch to convert spi_nor_otp_region_len(nor) & spi_nor_otp_n_regions(nor) macros into inline functions - Added Reviewed-by & Acked-by tags Changes in v2: - Rebased the patches on top of v6.2-rc1 - Created separate patch to add get & set APIs for spi->chip_select & spi->cs_gpiod, and replaced all spi->chip_select and spi->cs_gpiod references with the API calls. - Created separate patch to add get & set APIs for nor->params. --- Amit Kumar Mahapatra (15): spi: Replace all spi->chip_select and spi->cs_gpiod references with function call net: Replace all spi->chip_select and spi->cs_gpiod references with function call iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call staging: Replace all spi->chip_select and spi->cs_gpiod references with function call platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call powerpc/83xx/mpc832x_rdb: Replace all spi->chip_select references with function call ALSA: hda: cs35l41: Replace all spi->chip_select references with function call spi: Add stacked and parallel memories support in SPI core mtd: spi-nor: Convert macros with inline functions mtd: spi-nor: Add APIs to set/get nor->params mtd: spi-nor: Add stacked memories support in spi-nor spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver mtd: spi-nor: Add parallel memories support in spi-nor spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver arch/powerpc/platforms/83xx/mpc832x_rdb.c | 2 +- drivers/iio/imu/adis16400.c | 2 +- drivers/mtd/devices/mtd_dataflash.c | 2 +- drivers/mtd/spi-nor/atmel.c | 17 +- drivers/mtd/spi-nor/core.c | 665 +++++++++++++++--- drivers/mtd/spi-nor/core.h | 8 + drivers/mtd/spi-nor/debugfs.c | 4 +- drivers/mtd/spi-nor/gigadevice.c | 4 +- drivers/mtd/spi-nor/issi.c | 11 +- drivers/mtd/spi-nor/macronix.c | 6 +- drivers/mtd/spi-nor/micron-st.c | 39 +- drivers/mtd/spi-nor/otp.c | 48 +- drivers/mtd/spi-nor/sfdp.c | 29 +- drivers/mtd/spi-nor/spansion.c | 50 +- drivers/mtd/spi-nor/sst.c | 7 +- drivers/mtd/spi-nor/swp.c | 22 +- drivers/mtd/spi-nor/winbond.c | 10 +- drivers/mtd/spi-nor/xilinx.c | 18 +- drivers/net/ethernet/adi/adin1110.c | 2 +- drivers/net/ethernet/asix/ax88796c_main.c | 2 +- drivers/net/ethernet/davicom/dm9051.c | 2 +- drivers/net/ethernet/qualcomm/qca_debug.c | 2 +- drivers/net/ieee802154/ca8210.c | 2 +- drivers/net/wan/slic_ds26522.c | 2 +- .../net/wireless/marvell/libertas/if_spi.c | 2 +- drivers/net/wireless/silabs/wfx/bus_spi.c | 2 +- drivers/net/wireless/st/cw1200/cw1200_spi.c | 2 +- .../platform/x86/serial-multi-instantiate.c | 3 +- drivers/spi/spi-altera-core.c | 2 +- drivers/spi/spi-amd.c | 4 +- drivers/spi/spi-ar934x.c | 2 +- drivers/spi/spi-armada-3700.c | 4 +- drivers/spi/spi-aspeed-smc.c | 13 +- drivers/spi/spi-at91-usart.c | 2 +- drivers/spi/spi-ath79.c | 4 +- drivers/spi/spi-atmel.c | 26 +- drivers/spi/spi-au1550.c | 4 +- drivers/spi/spi-axi-spi-engine.c | 2 +- drivers/spi/spi-bcm-qspi.c | 10 +- drivers/spi/spi-bcm2835.c | 19 +- drivers/spi/spi-bcm2835aux.c | 4 +- drivers/spi/spi-bcm63xx-hsspi.c | 30 +- drivers/spi/spi-bcm63xx.c | 2 +- drivers/spi/spi-bcmbca-hsspi.c | 30 +- drivers/spi/spi-cadence-quadspi.c | 5 +- drivers/spi/spi-cadence-xspi.c | 4 +- drivers/spi/spi-cadence.c | 4 +- drivers/spi/spi-cavium.c | 8 +- drivers/spi/spi-coldfire-qspi.c | 8 +- drivers/spi/spi-davinci.c | 18 +- drivers/spi/spi-dln2.c | 6 +- drivers/spi/spi-dw-core.c | 2 +- drivers/spi/spi-dw-mmio.c | 4 +- drivers/spi/spi-falcon.c | 2 +- drivers/spi/spi-fsi.c | 2 +- drivers/spi/spi-fsl-dspi.c | 16 +- drivers/spi/spi-fsl-espi.c | 6 +- drivers/spi/spi-fsl-lpspi.c | 2 +- drivers/spi/spi-fsl-qspi.c | 6 +- drivers/spi/spi-fsl-spi.c | 2 +- drivers/spi/spi-geni-qcom.c | 6 +- drivers/spi/spi-gpio.c | 4 +- drivers/spi/spi-gxp.c | 4 +- drivers/spi/spi-hisi-sfc-v3xx.c | 2 +- drivers/spi/spi-img-spfi.c | 14 +- drivers/spi/spi-imx.c | 30 +- drivers/spi/spi-ingenic.c | 4 +- drivers/spi/spi-intel.c | 2 +- drivers/spi/spi-jcore.c | 4 +- drivers/spi/spi-lantiq-ssc.c | 6 +- drivers/spi/spi-mem.c | 4 +- drivers/spi/spi-meson-spicc.c | 2 +- drivers/spi/spi-microchip-core.c | 6 +- drivers/spi/spi-mpc512x-psc.c | 8 +- drivers/spi/spi-mpc52xx.c | 2 +- drivers/spi/spi-mt65xx.c | 6 +- drivers/spi/spi-mt7621.c | 2 +- drivers/spi/spi-mux.c | 8 +- drivers/spi/spi-mxic.c | 10 +- drivers/spi/spi-mxs.c | 2 +- drivers/spi/spi-npcm-fiu.c | 20 +- drivers/spi/spi-nxp-fspi.c | 10 +- drivers/spi/spi-omap-100k.c | 2 +- drivers/spi/spi-omap-uwire.c | 8 +- drivers/spi/spi-omap2-mcspi.c | 24 +- drivers/spi/spi-orion.c | 4 +- drivers/spi/spi-pci1xxxx.c | 4 +- drivers/spi/spi-pic32-sqi.c | 2 +- drivers/spi/spi-pic32.c | 4 +- drivers/spi/spi-pl022.c | 4 +- drivers/spi/spi-pxa2xx.c | 6 +- drivers/spi/spi-qcom-qspi.c | 2 +- drivers/spi/spi-rb4xx.c | 2 +- drivers/spi/spi-rockchip-sfc.c | 2 +- drivers/spi/spi-rockchip.c | 26 +- drivers/spi/spi-rspi.c | 10 +- drivers/spi/spi-s3c64xx.c | 2 +- drivers/spi/spi-sc18is602.c | 4 +- drivers/spi/spi-sh-msiof.c | 6 +- drivers/spi/spi-sh-sci.c | 2 +- drivers/spi/spi-sifive.c | 6 +- drivers/spi/spi-sn-f-ospi.c | 2 +- drivers/spi/spi-st-ssc4.c | 2 +- drivers/spi/spi-stm32-qspi.c | 12 +- drivers/spi/spi-sun4i.c | 2 +- drivers/spi/spi-sun6i.c | 2 +- drivers/spi/spi-synquacer.c | 6 +- drivers/spi/spi-tegra114.c | 28 +- drivers/spi/spi-tegra20-sflash.c | 2 +- drivers/spi/spi-tegra20-slink.c | 6 +- drivers/spi/spi-tegra210-quad.c | 8 +- drivers/spi/spi-ti-qspi.c | 16 +- drivers/spi/spi-topcliff-pch.c | 4 +- drivers/spi/spi-wpcm-fiu.c | 12 +- drivers/spi/spi-xcomm.c | 2 +- drivers/spi/spi-xilinx.c | 6 +- drivers/spi/spi-xlp.c | 4 +- drivers/spi/spi-zynq-qspi.c | 2 +- drivers/spi/spi-zynqmp-gqspi.c | 58 +- drivers/spi/spi.c | 213 ++++-- drivers/spi/spidev.c | 6 +- drivers/staging/fbtft/fbtft-core.c | 2 +- drivers/staging/greybus/spilib.c | 2 +- include/linux/mtd/spi-nor.h | 18 +- include/linux/spi/spi.h | 34 +- include/trace/events/spi.h | 10 +- sound/pci/hda/cs35l41_hda_spi.c | 2 +- 127 files changed, 1342 insertions(+), 613 deletions(-) -- 2.25.1

4 20

[PATCH v2 0/8] ASoC: Initial support for Cirrus Logic CS35L56
by Richard Fitzgerald 13 Mar '23

13 Mar '23

The CS35L56 is a high-performance boosted mono audio amplifier. Supported control interfaces are I2C, SPI or SoundWire. Supported audio interfaces are I2S/TDM or SoundWire. The CS35L56 has a self-booting firmware in ROM, with the ability to patch the firmware and/or apply tunings. Patches #1 to #7 add support to cs_dsp and wm_adsp for self-booting firmware and the ability to apply a .bin file without having to apply a .wmfw. Changes since v1: - Check for error when getting pm_runtime in cs35l56_irq(). - Use SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK instead of the old define. - Re-word two comments in cs35l56-sdw.c. - Add an comment explaining the wait for init_completion in cs35l56_dsp_work(). - Omit patches to Intel machine driver. These will be done as a separate thread. Richard Fitzgerald (1): ASoC: cs35l56: Add driver for Cirrus Logic CS35L56 Simon Trimmer (7): firmware: cs_dsp: Introduce no_core_startstop for self-booting DSPs ASoC: wm_adsp: Use no_core_startstop to prevent creating preload control firmware: cs_dsp: Support DSPs that don't require firmware download ASoC: wm_adsp: Support DSPs that don't require firmware download ASoC: wm_adsp: Expose the DSP boot work actions as wm_adsp_power_up() ASoC: wm_adsp: Add support for loading bin files without wmfw ASoC: wm_adsp: Simplify the logging of requested firmware files MAINTAINERS | 1 + drivers/firmware/cirrus/cs_dsp.c | 17 +- include/linux/firmware/cirrus/cs_dsp.h | 1 + include/sound/cs35l56.h | 266 +++++ sound/soc/codecs/Kconfig | 34 + sound/soc/codecs/Makefile | 10 + sound/soc/codecs/cs35l56-i2c.c | 83 ++ sound/soc/codecs/cs35l56-sdw.c | 528 +++++++++ sound/soc/codecs/cs35l56-shared.c | 390 +++++++ sound/soc/codecs/cs35l56-spi.c | 81 ++ sound/soc/codecs/cs35l56.c | 1461 ++++++++++++++++++++++++ sound/soc/codecs/cs35l56.h | 77 ++ sound/soc/codecs/wm_adsp.c | 63 +- sound/soc/codecs/wm_adsp.h | 3 + 14 files changed, 2999 insertions(+), 16 deletions(-) create mode 100644 include/sound/cs35l56.h create mode 100644 sound/soc/codecs/cs35l56-i2c.c create mode 100644 sound/soc/codecs/cs35l56-sdw.c create mode 100644 sound/soc/codecs/cs35l56-shared.c create mode 100644 sound/soc/codecs/cs35l56-spi.c create mode 100644 sound/soc/codecs/cs35l56.c create mode 100644 sound/soc/codecs/cs35l56.h -- 2.30.2

1 8

topology: pre-processor: fix regular expression flags
by GitHub pull_request - opened 13 Mar '23

13 Mar '23

alsa-project/alsa-utils pull request #195 was opened from aiChaoSONG: The REG_ICASE flag is a compile-time flag (cflags), it should be used with regcomp() instead of regexec(). Also add the REG_EXTENDED flag in this patch to make patterns like 'tgl|adl' work. Request URL : https://github.com/alsa-project/alsa-utils/pull/195 Patch URL : https://github.com/alsa-project/alsa-utils/pull/195.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

ALC4080 on MSI MPG Z590 Gaming Force (0db0:8af7)
by GitHub issues - opened 13 Mar '23

13 Mar '23

alsa-project/alsa-ucm-conf issue #290 was opened from Paris17: I have a MSI MPG Z590 GAMING FORCE motherboard with ALC4080. Front panel audio doesn't work in any Linux distribution I've tried. But adding in "USB-Audio.conf" the device ID number (0db0:8af7) to the command for "Define.ProfileName" works in Arch, OpenSuse, Manjaro and EndeavourOS. It doesn't work in Fedora and Clear Linux though. Please add audio support for this motherboard in USB-Audio.conf. Thank you. USB ID: 0db0:8af7 $ lsusb | grep 0db0 Bus 001 Device 003: ID 0db0:8af7 Micro Star International USB Audio Here is my alsa-info output: http://alsa-project.org/db/?f=a5339b54ab51163373c77dc45c267bfba2507531 Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/290 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[RESEND][PATCH 0/2] ASoC: cppcheck fixups
by Kuninori Morimoto 13 Mar '23

13 Mar '23

Hi Mark Cc Takashi This is resend of posted patch. This patch-set fixes the issues which is reported by cppcheck. Best regards --- Kuninori Morimoto

2 4

[PATCH 0/4] RZ/G2L SSI: Update interrupt numbers
by Prabhakar 12 Mar '23

12 Mar '23

From: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Hi All, This patch series aims to fix interrupt numbers for SSI channels and updates the DT binding and the driver accordingly. Note, this patch series applies on top of [0]. [0] https://patchwork.kernel.org/project/linux-renesas-soc/cover/20230131223529… Cheers, Prabhakar Lad Prabhakar (4): ASoC: dt-bindings: renesas,rz-ssi: Update interrupts and interrupt-names properties ASoC: sh: rz-ssi: Update interrupt handling for half duplex channels arm64: dts: renesas: r9a07g044: Update IRQ numbers for SSI channels arm64: dts: renesas: r9a07g043: Update IRQ numbers for SSI channels .../bindings/sound/renesas,rz-ssi.yaml | 21 ++++--- arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 19 +++--- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 19 +++--- sound/soc/sh/rz-ssi.c | 63 +++++++++++++------ 4 files changed, 70 insertions(+), 52 deletions(-) -- 2.25.1

6 11

[RFC PATCH] ASoC: dt-bindings: adi,adau17x1: Convert to DT schema
by Vijaya Anand 12 Mar '23

12 Mar '23

Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format. Signed-off-by: Vijaya Anand <sunrockers8(a)gmail.com> Cc: Daniel Baluta <daniel.baluta(a)nxp.com> --- .../bindings/sound/adi,adau17x1.txt | 32 ------------ .../bindings/sound/adi,adau17x1.yaml | 52 +++++++++++++++++++ 2 files changed, 52 insertions(+), 32 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.txt create mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.yaml diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.txt b/Documentation/devicetree/bindings/sound/adi,adau17x1.txt deleted file mode 100644 index 1447dec28125..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,adau17x1.txt +++ /dev/null @@ -1,32 +0,0 @@ -Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 - -Required properties: - - - compatible: Should contain one of the following: - "adi,adau1361" - "adi,adau1461" - "adi,adau1761" - "adi,adau1961" - "adi,adau1381" - "adi,adau1781" - - - reg: The i2c address. Value depends on the state of ADDR0 - and ADDR1, as wired in hardware. - -Optional properties: - - clock-names: If provided must be "mclk". - - clocks: phandle + clock-specifiers for the clock that provides - the audio master clock for the device. - -Examples: -#include <dt-bindings/sound/adau17x1.h> - - i2c_bus { - adau1361@38 { - compatible = "adi,adau1761"; - reg = <0x38>; - - clock-names = "mclk"; - clocks = <&audio_clock>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml new file mode 100644 index 000000000000..9c1dbf2b4e70 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau17x1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 + +maintainers: + - Lars-Peter Clausen <lars(a)metafoo.de> + +properties: + compatible: + enum: + - adi,adau1361 + - adi,adau1461 + - adi,adau1761 + - adi,adau1961 + - adi,adau1381 + - adi,adau1781 + + reg: + maxItems: 1 + description: The i2c address. Value depends on the state of ADDR0 and ADDR1, as wired in hardware. + + clock-names: + const: mclk + + clocks: + maxItems: 1 + description: + phandle + clock-specifiers for the clock that provides the audio master + clock for the device. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c_bus { + #address-cells = <1>; + #size-cells = <0>; + adau1361@38 { + compatible = "adi,adau1761"; + reg = <0x38>; + clock-names = "mclk"; + clocks = <&audio_clock>; + }; + }; -- 2.37.1 (Apple Git-137.1)

2 1

[PATCH v4] ASoC: tas2781: Add tas2781 driver
by Shenghao Ding 12 Mar '23

12 Mar '23

Create tas2781 driver. Signed-off-by: Shenghao Ding <13916275206(a)139.com> --- Changes in v4: - make the entire comment block a C++ one - remove uncessary dbg log in the firmware downlaoding - remove simliar macro already defined in ALSA header - use crc8_populate_msb() to generate the crc lookup table - remove all the hungarian notation in the code - remove log failures to allocate - add comment for tas2781_digital_getvol on the reason to custom control, tas2781 contain book and page two-level regmap, especially book switching will set two registers, one is BXXPXXR00, the other is B0P0R7F, after switching to the correct book, then the code can leverage the mechanism for paging, and access the register. - return 1 in all of the put control callback - fix "Control names for volumes should end with Volume" - remove the Lock in the control callback functions - remove likely() or unlikely(). - remove uncessary GPIO check for irq - remove unused functions - remove i2c check in the i2c probe Changes to be committed: modified: sound/soc/codecs/Kconfig modified: sound/soc/codecs/Makefile new file: sound/soc/codecs/tas2781-dsp.c new file: sound/soc/codecs/tas2781-dsp.h new file: sound/soc/codecs/tas2781-i2c.c new file: sound/soc/codecs/tas2781.h --- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2781-dsp.c | 2192 ++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2781-dsp.h | 178 +++ sound/soc/codecs/tas2781-i2c.c | 1660 ++++++++++++++++++++++++ sound/soc/codecs/tas2781.h | 170 +++ 6 files changed, 4214 insertions(+) create mode 100644 sound/soc/codecs/tas2781-dsp.c create mode 100644 sound/soc/codecs/tas2781-dsp.h create mode 100644 sound/soc/codecs/tas2781-i2c.c create mode 100644 sound/soc/codecs/tas2781.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 07747565c3b5..e1afe1ced5d7 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -229,6 +229,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2764 imply SND_SOC_TAS2770 imply SND_SOC_TAS2780 + imply SND_SOC_TAS2781 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1637,6 +1638,17 @@ config SND_SOC_TAS2780 Enable support for Texas Instruments TAS2780 high-efficiency digital input mono Class-D audio power amplifiers. +config SND_SOC_TAS2781 + tristate "Texas Instruments TAS2781 speaker amplifier" + depends on I2C + select REGMAP_I2C + select CRC8 + help + Enable support for Texas Instruments TAS2781 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + Note the TAS2781 driver implements a flexible and configurable + algo coff setting, for one, two, even multiple TAS2781 chips. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f1ca18f7946c..5559b9e9cc17 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -262,6 +262,7 @@ snd-soc-tas5805m-objs := tas5805m.o snd-soc-tas6424-objs := tas6424.o snd-soc-tda7419-objs := tda7419.o snd-soc-tas2770-objs := tas2770.o +snd-soc-tas2781-objs := tas2781-i2c.o tas2781-dsp.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -619,6 +620,7 @@ obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o +obj-$(CONFIG_SND_SOC_TAS2781) += snd-soc-tas2781.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2781-dsp.c b/sound/soc/codecs/tas2781-dsp.c new file mode 100644 index 000000000000..2a1f0bbb95a5 --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.c @@ -0,0 +1,2192 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/string.h> +#include <linux/crc8.h> +#include <linux/slab.h> +#include <linux/fs.h> +#include <linux/firmware.h> + +#include "tas2781.h" + +#define ERROR_PRAM_CRCCHK 0x0000000 +#define ERROR_YRAM_CRCCHK 0x0000001 +#define BINFILE_VER 0 +#define DRV_VER 1 +#define PPC_DRIVER_CRCCHK 0x00000200 + +#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) +#define TAS2781_YRAM_BOOK1 140 +#define TAS2781_YRAM1_PAGE 42 +#define TAS2781_YRAM1_START_REG 88 + +#define TAS2781_YRAM2_START_PAGE 43 +#define TAS2781_YRAM2_END_PAGE 49 +#define TAS2781_YRAM2_START_REG 8 +#define TAS2781_YRAM2_END_REG 127 + +#define TAS2781_YRAM3_PAGE 50 +#define TAS2781_YRAM3_START_REG 8 +#define TAS2781_YRAM3_END_REG 27 + +/*should not include B0_P53_R44-R47 */ +#define TAS2781_YRAM_BOOK2 0 +#define TAS2781_YRAM4_START_PAGE 50 +#define TAS2781_YRAM4_END_PAGE 60 + +#define TAS2781_YRAM5_PAGE 61 +#define TAS2781_YRAM5_START_REG 8 +#define TAS2781_YRAM5_END_REG 27 + +#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 +#define MAIN_ALL_DEVICES_1X 0x01 +#define MAIN_DEVICE_A_1X 0x02 +#define MAIN_DEVICE_B_1X 0x03 +#define MAIN_DEVICE_C_1X 0x04 +#define MAIN_DEVICE_D_1X 0x05 +#define COEFF_DEVICE_A_1X 0x12 +#define COEFF_DEVICE_B_1X 0x13 +#define COEFF_DEVICE_C_1X 0x14 +#define COEFF_DEVICE_D_1X 0x15 +#define PRE_DEVICE_A_1X 0x22 +#define PRE_DEVICE_B_1X 0x23 +#define PRE_DEVICE_C_1X 0x24 +#define PRE_DEVICE_D_1X 0x25 + +struct tas_crc { + unsigned char offset; + unsigned char len; +}; + +const char deviceNumber[TASDEVICE_DSP_TAS_MAX_DEVICE] = { + 1, 2, 1, 2, 1, 1, 0, 2, 4, 3, 1, 2, 3, 4 +}; + +static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + block->type = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], + data[offset + 3]); + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mbPChkSumPresent error\n", + __func__); + offset = -1; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnPChkSum error\n", __func__); + offset = -1; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mbYChkSumPresent error\n", + __func__); + offset = -1; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnYChkSum error\n", __func__); + offset = -1; + goto out; + } + block->ychksum = data[offset]; + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: blk_size error\n", __func__); + offset = -1; + goto out; + } + block->blk_size = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); + offset = -1; + goto out; + } + block->nr_subblocks = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + block->data = kzalloc(block->blk_size, GFP_KERNEL); + if (block->data == NULL) { + offset = -1; + goto out; + } + memcpy(block->data, &data[offset], block->blk_size); + offset += block->blk_size; +out: + return offset; +} + +static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = fmw->data; + unsigned int nr_block; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + img_data->nr_blk = SMS_HTONL(data[offset], + data[offset + 1], data[offset + 2], data[offset + 3]); + offset += 4; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (img_data->dev_blks == NULL) { + dev_err(tas_fmw->dev, "%s: FW memory failed!\n", __func__); + goto out; + } + + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + offset = fw_parse_block_data_kernel(tas_fmw, + &(img_data->dev_blks[nr_block]), fmw, offset); + if (offset < 0) { + offset = -1; + goto out; + } + } +out: + return offset; +} + +static int fw_parse_program_data_kernel( + struct tasdevice_priv *tas_dev, struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned int nr_program = 0; + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", + __func__); + offset = -1; + goto out; + } + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnAppMode error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPDMI2SMode error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnISnsPD error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnVSnsPD error\n", + __func__); + offset = -1; + goto out; + } + offset++; + //skip 3-byte reserved + offset += 3; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPowerLDG error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + offset = fw_parse_data_kernel(tas_fmw, &(program->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_configuration_data_kernel( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + unsigned int nr_configs; + struct tasdevice_config *config; + + for (nr_configs = 0; nr_configs < tas_fmw->nr_configurations; + nr_configs++) { + config = + &(tas_fmw->configs[nr_configs]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", + __func__); + offset = -1; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: orientation error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDevices error\n", + __func__); + offset = -1; + goto out; + } + offset += 1; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mProgram error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnSamplingRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPLLSrc error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFsRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPLLSrcRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 4; + offset = fw_parse_data_kernel(tas_fmw, + &(config->dev_data), fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_variable_header_kernel( + struct tasdevice_priv *tas_dev, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + const unsigned char *buf = fmw->data; + struct tasdevice_prog *program; + struct tasdevice_config *config; + unsigned int nr_program = 0, nr_configs = 0; + unsigned short max_confs = TASDEVICE_MAXCONFIG_NUM_KERNEL; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device_family = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "ERROR:%s:not TAS device\n", __func__); + offset = -1; + goto out; + } + offset += 2; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDevice error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device = SMS_HTONS(buf[offset], buf[offset + 1]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "ERROR:%s: not support device %d\n", + __func__, fw_hdr->device); + offset = -1; + goto out; + } + offset += 2; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin dismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, tas_dev->ndev); + offset = -1; + goto out; + } + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPrograms error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_programs = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + if (tas_fmw->nr_programs == 0 || tas_fmw->nr_programs > + TASDEVICE_MAXPROGRAM_NUM_KERNEL) { + dev_err(tas_dev->dev, "%s: mnPrograms is invalid\n", __func__); + offset = -1; + goto out; + } + + if (offset + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { + dev_err(tas_dev->dev, "%s: mpPrograms error\n", __func__); + offset = -1; + goto out; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, + sizeof(struct tasdevice_prog), GFP_KERNEL); + if (tas_fmw->programs == NULL) { + dev_err(tas_dev->dev, "%s: mpPrograms memory failed!\n", + __func__); + offset = -1; + goto out; + } + + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + program = &(tas_fmw->programs[nr_program]); + program->prog_size = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + } + offset += (4 * (5 - nr_program)); + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnConfigurations error\n", + __func__); + offset = -1; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + max_confs = (fw_hdr->ndev >= 4) ? + TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS : + TASDEVICE_MAXCONFIG_NUM_KERNEL; + if (tas_fmw->nr_configurations == 0 || + tas_fmw->nr_configurations > max_confs) { + dev_err(tas_dev->dev, "%s: mnConfigurations is invalid\n", + __func__); + offset = -1; + goto out; + } + + if (offset + 4 * max_confs > fmw->size) { + dev_err(tas_dev->dev, "%s: mpConfigurations error\n", + __func__); + offset = -1; + goto out; + } + + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + if (tas_fmw->configs == NULL) { + offset = -1; + goto out; + } + + for (nr_configs = 0; nr_configs < tas_fmw->nr_programs; + nr_configs++) { + config = + &(tas_fmw->configs[nr_configs]); + config->cfg_size = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + } + + offset += (4 * (max_confs - nr_configs)); +out: + return offset; +} + +static int tasdevice_load_block_kernel( + struct tasdevice_priv *tasdevice, struct tasdev_blk *block) +{ + int ret = 0; + + unsigned char *data = block->data; + unsigned int i = 0, length = 0; + const unsigned int blk_size = block->blk_size; + unsigned char dev_idx = 0; + struct tasdevice_dspfw_hdr *fw_hdr = &(tasdevice->fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + + if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + switch (block->type) { + case MAIN_ALL_DEVICES_1X: + dev_idx = 0|0x80; + break; + case MAIN_DEVICE_A_1X: + dev_idx = 1|0x80; + break; + case COEFF_DEVICE_A_1X: + case PRE_DEVICE_A_1X: + dev_idx = 1|0xC0; + break; + case MAIN_DEVICE_B_1X: + dev_idx = 2|0x80; + break; + case COEFF_DEVICE_B_1X: + case PRE_DEVICE_B_1X: + dev_idx = 2|0xC0; + break; + case MAIN_DEVICE_C_1X: + dev_idx = 3|0x80; + break; + case COEFF_DEVICE_C_1X: + case PRE_DEVICE_C_1X: + dev_idx = 3|0xC0; + break; + case MAIN_DEVICE_D_1X: + dev_idx = 4|0x80; + break; + case COEFF_DEVICE_D_1X: + case PRE_DEVICE_D_1X: + dev_idx = 4|0xC0; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } else { + switch (block->type) { + case MAIN_ALL_DEVICES: + dev_idx = 0|0x80; + break; + case MAIN_DEVICE_A: + dev_idx = 1|0x80; + break; + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + dev_idx = 1|0xC0; + break; + case MAIN_DEVICE_B: + dev_idx = 2|0x80; + break; + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + dev_idx = 2|0xC0; + break; + case MAIN_DEVICE_C: + dev_idx = 3|0x80; + break; + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + dev_idx = 3|0xC0; + break; + case MAIN_DEVICE_D: + dev_idx = 4|0x80; + break; + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + dev_idx = 4|0xC0; + break; + default: + dev_info(tasdevice->dev, + "%s: load block: Other Type = 0x%02x\n", + __func__, block->type); + break; + } + } + + for (i = 0; i < block->nr_subblocks; i++) { + int rc = tasdevice_process_block(tasdevice, data + length, + dev_idx, blk_size - length); + if (rc < 0) { + dev_err(tasdevice->dev, + "%s: ERROR:%u %u sublock write error\n", + __func__, length, blk_size); + break; + } + length += (unsigned int)rc; + if (blk_size < length) { + dev_err(tasdevice->dev, + "%s: ERROR:%u %u out of bounary\n", + __func__, length, blk_size); + break; + } + } + + return ret; +} + +static int fw_parse_variable_header_git(struct tasdevice_priv + *tas_dev, const struct firmware *fmw, int offset) +{ + const unsigned char *buf = fmw->data; + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + int i = strlen((char *)&buf[offset]); + + i++; + + if (offset + i > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + + offset += i; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "ERROR:%s: not TAS device\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "ERROR:%s: not support device %d\n", + __func__, fw_hdr->device); + offset = -1; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "%s: ndev(%u) in dspbin dismatch ndev(%u) in DTS\n", + __func__, fw_hdr->ndev, + tas_dev->ndev); + offset = -1; + } + +out: + return offset; +} + +static int fw_parse_variable_hdr_cal(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *buf = fmw->data; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + int i = strlen((char *)&buf[offset]); + + i++; + + if (offset + i > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + + offset += i; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDeviceFamily error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device_family = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device_family != 0) { + dev_err(tas_dev->dev, "ERROR:%s: not TAS device\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDevice error\n", __func__); + offset = -1; + goto out; + } + fw_hdr->device = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_dev->dev, "ERROR:%s: not support device %d\n", + __func__, fw_hdr->device); + offset = -1; + goto out; + } + offset += 4; + fw_hdr->ndev = deviceNumber[fw_hdr->device]; + if (fw_hdr->ndev != 1) { + dev_err(tas_dev->dev, + "%s: calbin must be 1, but currently ndev(%u)\n", + __func__, fw_hdr->ndev); + offset = -1; + } + +out: + return offset; +} + +static inline void tas2781_clear_calfirmware(struct tasdevice_fw + *tas_fmw) +{ + int i = 0; + unsigned int blks = 0; + + if (tas_fmw->calibrations) { + struct tasdevice_calibration *calibration; + + for (i = 0; i < tas_fmw->nr_calibrations; i++) { + calibration = &(tas_fmw->calibrations[i]); + if (calibration) { + struct tasdevice_data *im = + &(calibration->dev_data); + + if (im->dev_blks) { + struct tasdev_blk *block; + + for (blks = 0; blks < im->nr_blk; + blks++) { + block = &(im->dev_blks[blks]); + kfree(block->data); + } + kfree(im->dev_blks); + } + } + } + kfree(tas_fmw->calibrations); + } + kfree(tas_fmw); +} + +static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnType error\n", __func__); + offset = -1; + goto out; + } + block->type = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= + PPC_DRIVER_CRCCHK) { + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mbPChkSumPresent error\n", + __func__); + offset = -1; + goto out; + } + block->is_pchksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnPChkSum error\n", + __func__); + offset = -1; + goto out; + } + block->pchksum = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mbYChkSumPresent error\n", + __func__); + offset = -1; + goto out; + } + block->is_ychksum_present = data[offset]; + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnYChkSum error\n", + __func__); + offset = -1; + goto out; + } + block->ychksum = data[offset]; + offset++; + } else { + block->is_pchksum_present = 0; + block->is_ychksum_present = 0; + } + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnCommands error\n", __func__); + offset = -1; + goto out; + } + block->nr_cmds = SMS_HTONL(data[offset], data[offset + 1], + data[offset + 2], data[offset + 3]); + offset += 4; + + n = block->nr_cmds * 4; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, + "%s: File Size(%lu) error offset = %d n = %d\n", + __func__, (unsigned long)fmw->size, offset, n); + offset = -1; + goto out; + } + block->data = kmemdup(&data[offset], n, GFP_KERNEL); + if (block->data == NULL) { + offset = -1; + goto out; + } + offset += n; +out: + return offset; +} + +static int fw_parse_data(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = (unsigned char *)fmw->data; + int n = 0; + unsigned int nr_block; + + if (offset + 64 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mpName error\n", __func__); + n = -1; + goto out; + } + memcpy(img_data->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, "%s: mpDescription error\n", __func__); + offset = -1; + goto out; + } + offset += n; + + if (offset + 2 > fmw->size) { + dev_err(tas_fmw->dev, "%s: mnBlocks error\n", __func__); + offset = -1; + goto out; + } + img_data->nr_blk = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + img_data->dev_blks = + kcalloc(img_data->nr_blk, sizeof(struct tasdev_blk), + GFP_KERNEL); + if (img_data->dev_blks == NULL) { + dev_err(tas_fmw->dev, "%s: FW memory failed!\n", __func__); + goto out; + } + for (nr_block = 0; nr_block < img_data->nr_blk; nr_block++) { + offset = fw_parse_block_data(tas_fmw, + &(img_data->dev_blks[nr_block]), fmw, offset); + if (offset < 0) { + offset = -1; + goto out; + } + } +out: + return offset; +} + +static int fw_parse_calibration_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + unsigned int n = 0; + unsigned int nr_calibration = 0; + struct tasdevice_calibration *calibration = NULL; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnCalibrations error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_calibrations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_calibrations != 1) { + dev_err(tas_dev->dev, + "%s: only support one calibraiton(%d)!\n", + __func__, tas_fmw->nr_calibrations); + goto out; + } + + tas_fmw->calibrations = + kcalloc(tas_fmw->nr_calibrations, + sizeof(struct tasdevice_calibration), GFP_KERNEL); + if (tas_fmw->calibrations == NULL) { + dev_err(tas_dev->dev, "%s: mpCalibrations memory failed!\n", + __func__); + offset = -1; + goto out; + } + for (nr_calibration = 0; nr_calibration < tas_fmw->nr_calibrations; + nr_calibration++) { + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpCalibrations error\n", + __func__); + offset = -1; + goto out; + } + calibration = &(tas_fmw->calibrations[nr_calibration]); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDescription error\n", + __func__); + offset = -1; + goto out; + } + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, + "%s: mnProgram error, offset = %d\n", __func__, + offset); + offset = -1; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, + "%s: mnConfiguration error, offset = %d\n", + __func__, + offset); + offset = -1; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(calibration->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } + +out: + + return offset; +} + +static int fw_parse_program_data(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned char *buf = (unsigned char *)fmw->data; + int nr_program = 0; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_programs = SMS_HTONS(buf[offset], buf[offset + 1]); + offset += 2; + + if (tas_fmw->nr_programs == 0) { + dev_err(tas_dev->dev, "%s: mnPrograms is null, maybe calbin\n", + __func__); + //Do not "offset = -1;", because of calbin + goto out; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, sizeof(struct tasdevice_prog), + GFP_KERNEL); + if (tas_fmw->programs == NULL) { + offset = -1; + goto out; + } + for (nr_program = 0; nr_program < tas_fmw->nr_programs; nr_program++) { + int n = 0; + + program = &(tas_fmw->programs[nr_program]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpName error\n", __func__); + offset = -1; + goto out; + } + offset += 64; + + n = strlen((char *)&buf[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDescription error\n", + __func__); + offset = -1; + goto out; + } + + offset += n; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnAppMode error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPDMI2SMode error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnISnsPD error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnVSnsPD error\n", + __func__); + offset = -1; + goto out; + } + offset++; + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPowerLDG error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + offset = fw_parse_data(tas_fmw, &(program->dev_data), fmw, + offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_configuration_data( + struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + unsigned int n_configs; + struct tasdevice_config *config; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + tas_fmw->nr_configurations = SMS_HTONS(data[offset], data[offset + 1]); + offset += 2; + + if (tas_fmw->nr_configurations == 0) { + dev_err(tas_dev->dev, "%s: Configurations is zero\n", + __func__); + //Do not "offset = -1;", because of calbin + goto out; + } + tas_fmw->configs = + kcalloc(tas_fmw->nr_configurations, + sizeof(struct tasdevice_config), GFP_KERNEL); + + for (n_configs = 0; n_configs < tas_fmw->nr_configurations; + n_configs++) { + config = + &(tas_fmw->configs[n_configs]); + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", + __func__); + offset = -1; + goto out; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDescription error\n", + __func__); + offset = -1; + goto out; + } + + offset += n; + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, + "%s: mnDevice_orientation error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mProgram error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnSamplingRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 4; + + if (offset + 1 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPLLSrc error\n", + __func__); + offset = -1; + goto out; + } + offset++; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPLLSrcRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 4; + + if (offset + 2 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFsRate error\n", + __func__); + offset = -1; + goto out; + } + offset += 2; + + offset = fw_parse_data(tas_fmw, &(config->dev_data), + fmw, offset); + if (offset < 0) + goto out; + } +out: + return offset; +} + +static int fw_parse_header(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + const unsigned char *buf = (unsigned char *)fmw->data; + const unsigned char magic_number[] = { 0x35, 0x35, 0x35, 0x32 }; + + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + if (memcmp(&buf[offset], magic_number, 4)) { + dev_err(tas_dev->dev, "%s: Magic number doesn't match", + __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWSize error\n", __func__); + offset = -1; + goto out; + } + fw_fixed_hdr->fwsize = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: File Size error\n", __func__); + offset = -1; + goto out; + } + if (fw_fixed_hdr->fwsize != fmw->size) { + dev_err(tas_dev->dev, "File size not match, %lu %u", + (unsigned long)fmw->size, fw_fixed_hdr->fwsize); + offset = -1; + goto out; + } + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnChecksum error\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnPPCVersion error\n", __func__); + offset = -1; + goto out; + } + fw_fixed_hdr->ppcver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnFWVersion error\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnDriverVersion error\n", __func__); + offset = -1; + goto out; + } + fw_fixed_hdr->drv_ver = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + if (offset + 4 > fmw->size) { + dev_err(tas_dev->dev, "%s: mnTimeStamp error\n", __func__); + offset = -1; + goto out; + } + offset += 4; + if (offset + 64 > fmw->size) { + dev_err(tas_dev->dev, "%s: mpDDCName error\n", __func__); + offset = -1; + goto out; + } + offset += 64; + + out: + return offset; +} + +static int check_inpage_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + int ret = 0; + + if (book == TAS2781_YRAM_BOOK1) { + if (page == TAS2781_YRAM1_PAGE) { + if (reg >= TAS2781_YRAM1_START_REG) { + cd->offset = reg; + cd->len = len; + ret = 1; + } else if ((reg + len) > TAS2781_YRAM1_START_REG) { + cd->offset = TAS2781_YRAM1_START_REG; + cd->len = + len - (TAS2781_YRAM1_START_REG - reg); + ret = 1; + } else + ret = 0; + } else if (page == TAS2781_YRAM3_PAGE) { + if (reg > TAS2781_YRAM3_END_REG) { + ret = 0; + } else if (reg >= TAS2781_YRAM3_START_REG) { + if ((reg + len) > TAS2781_YRAM3_END_REG) { + cd->offset = reg; + cd->len = + TAS2781_YRAM3_END_REG - reg + 1; + ret = 1; + } else { + cd->offset = reg; + cd->len = len; + ret = 1; + } + } else { + if ((reg + (len-1)) < + TAS2781_YRAM3_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM3_START_REG; + cd->len = + len - (TAS2781_YRAM3_START_REG - reg); + ret = 1; + } + } + } + } else if (book == + TAS2781_YRAM_BOOK2) { + if (page == TAS2781_YRAM5_PAGE) { + if (reg > TAS2781_YRAM5_END_REG) { + ret = 0; + } else if (reg >= TAS2781_YRAM5_START_REG) { + if ((reg + len) > TAS2781_YRAM5_END_REG) { + cd->offset = reg; + cd->len = + TAS2781_YRAM5_END_REG - reg + 1; + ret = 1; + } else { + cd->offset = reg; + cd->len = len; + ret = 1; + } + } else { + if ((reg + (len-1)) < + TAS2781_YRAM5_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM5_START_REG; + cd->len = + len - (TAS2781_YRAM5_START_REG - reg); + ret = 1; + } + } + } + } else + ret = 0; + + return ret; +} + +static int check_inblock_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + int ret = 0; + + if (book == TAS2781_YRAM_BOOK1) { + if (page < TAS2781_YRAM2_START_PAGE) + ret = 0; + else if (page <= TAS2781_YRAM2_END_PAGE) { + if (reg > TAS2781_YRAM2_END_REG) + ret = 0; + else if (reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + ret = 1; + } else { + if ((reg + (len-1)) < + TAS2781_YRAM2_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM2_START_REG; + cd->len = + reg + len - TAS2781_YRAM2_START_REG; + ret = 1; + } + } + } else + ret = 0; + } else if (book == + TAS2781_YRAM_BOOK2) { + if (page < TAS2781_YRAM4_START_PAGE) + ret = 0; + else if (page <= TAS2781_YRAM4_END_PAGE) { + if (reg > TAS2781_YRAM2_END_REG) + ret = 0; + else if (reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + ret = 1; + } else { + if ((reg + (len-1)) + < TAS2781_YRAM2_START_REG) + ret = 0; + else { + cd->offset = + TAS2781_YRAM2_START_REG; + cd->len = + reg + len - TAS2781_YRAM2_START_REG; + ret = 1; + } + } + } else + ret = 0; + } else + ret = 0; + + return ret; +} + +static int check_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + int ret = 0; + + ret = check_inpage_yram(cd, book, page, reg, len); + if (ret == 0) + ret = check_inblock_yram(cd, book, + page, reg, len); + + return ret; +} + +static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, + enum channel chl, unsigned char book, unsigned char page, + unsigned char reg, unsigned char val) +{ + int ret = 0; + struct tas_crc crc_data; + unsigned int nData1 = 0; + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg >= TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (reg <= (TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG) + 4))) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + ret = check_yram(&crc_data, book, page, reg, 1); + if (ret == 1) { + ret = tasdevice_dev_read(tasdevice, chl, + TASDEVICE_REG(book, page, reg), &nData1); + if (ret < 0) + goto end; + + if (nData1 != val) { + dev_err(tasdevice->dev, + "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", + book, page, reg, + val, nData1); + ret = -EAGAIN; + tasdevice->tasdevice[chl].err_code |= + ERROR_YRAM_CRCCHK; + ret = -EAGAIN; + goto end; + } + + ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); + } + +end: + return ret; +} + +static int do_multireg_checksum(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned char book, unsigned char page, + unsigned char reg, unsigned int len) +{ + int ret = 0, i = 0; + unsigned char crc_chksum = 0; + unsigned char nBuf1[128] = {0}; + struct tas_crc crc_data; + + if ((reg + len-1) > 127) { + ret = -EINVAL; + dev_err(tasdevice->dev, "firmware error\n"); + goto end; + } + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) + && (reg == TASDEVICE_PAGE_REG(TAS2781_SA_COEFF_SWAP_REG)) + && (len == 4)) { + /*DSP swap command, pass */ + ret = 0; + goto end; + } + + ret = check_yram(&crc_data, book, page, reg, len); + if (ret == 1) { + if (len == 1) { + dev_err(tasdevice->dev, "firmware error\n"); + ret = -EINVAL; + goto end; + } else { + ret = tasdevice_dev_bulk_read(tasdevice, chn, + TASDEVICE_REG(book, page, crc_data.offset), + nBuf1, crc_data.len); + if (ret < 0) + goto end; + + for (i = 0; i < crc_data.len; i++) { + if ((book == TASDEVICE_BOOK_ID( + TAS2781_SA_COEFF_SWAP_REG)) + && (page == TASDEVICE_PAGE_ID( + TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + >= TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG)) + && ((i + crc_data.offset) + <= (TASDEVICE_PAGE_REG( + TAS2781_SA_COEFF_SWAP_REG) + + 4))) { + /*DSP swap command, bypass */ + continue; + } else + crc_chksum += + crc8(tasdevice->crc8_lkp_tbl, + &nBuf1[i], 1, 0); + } + + ret = crc_chksum; + } + } + +end: + return ret; +} + +static int tasdevice_load_block(struct tasdevice_priv *tas_dev, + struct tasdev_blk *block) +{ + int ret = 0; + unsigned int nr_cmds = 0; + unsigned char book = 0; + unsigned char page = 0; + unsigned char offset = 0; + unsigned char val = 0; + unsigned int len = 0; + unsigned int sleep_dur = 0; + unsigned char crc_chksum = 0; + unsigned int nr_value = 0; + int nr_retry = 6; + unsigned char *data = block->data; + int chn = 0, chnend = 0; + + switch (block->type) { + case MAIN_ALL_DEVICES: + chn = 0; + chnend = tas_dev->ndev; + break; + case MAIN_DEVICE_A: + case COEFF_DEVICE_A: + case PRE_DEVICE_A: + chn = 0; + chnend = 1; + break; + case MAIN_DEVICE_B: + case COEFF_DEVICE_B: + case PRE_DEVICE_B: + chn = 1; + chnend = 2; + break; + case MAIN_DEVICE_C: + case COEFF_DEVICE_C: + case PRE_DEVICE_C: + chn = 2; + chnend = 3; + break; + case MAIN_DEVICE_D: + case COEFF_DEVICE_D: + case PRE_DEVICE_D: + chn = 3; + chnend = 4; + break; + default: + dev_dbg(tas_dev->dev, "load block: Other Type = 0x%02x\n", + block->type); + break; + } + + for (; chn < chnend; chn++) { + if (tas_dev->tasdevice[chn].is_loading == false) + continue; +start: + if (block->is_pchksum_present) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_I2CChecksum, 0); + if (ret < 0) + goto end; + } + + if (block->is_ychksum_present) + crc_chksum = 0; + + nr_cmds = 0; + + while (nr_cmds < block->nr_cmds) { + data = block->data + nr_cmds * 4; + + book = data[0]; + page = data[1]; + offset = data[2]; + val = data[3]; + + nr_cmds++; + + if (offset <= 0x7F) { + ret = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(book, page, offset), + val); + if (ret < 0) + goto end; + if (block->is_ychksum_present) { + ret = do_singlereg_checksum(tas_dev, + chn, book, page, offset, + val); + if (ret < 0) + goto check; + crc_chksum += (unsigned char)ret; + } + continue; + } + if (offset == 0x81) { + sleep_dur = (book << 8) + page; + msleep(sleep_dur); + continue; + } + if (offset == 0x85) { + data += 4; + len = (book << 8) + page; + book = data[0]; + page = data[1]; + offset = data[2]; + if (len > 1) { + ret = tasdevice_dev_bulk_write( + tas_dev, chn, + TASDEVICE_REG(book, page, + offset), data + 3, len); + if (ret < 0) + goto end; + if (!block->is_ychksum_present) + goto next; + ret = do_multireg_checksum( + tas_dev, chn, book, + page, offset, + len); + if (ret < 0) + goto check; + crc_chksum += + (unsigned char)ret; + } else { + ret = tasdevice_dev_write(tas_dev, + chn, + TASDEVICE_REG(book, page, + offset), + data[3]); + if (ret < 0) + goto end; + if (!block->is_ychksum_present) + goto next; + ret = do_singlereg_checksum( + tas_dev, chn, book, + page, offset, + data[3]); + if (ret < 0) + goto check; + crc_chksum += + (unsigned char)ret; + } +next: + nr_cmds++; + if (len >= 2) + nr_cmds += ((len - 2) / 4) + 1; + } + } + if (block->is_pchksum_present) { + ret = tasdevice_dev_read(tas_dev, chn, + TASDEVICE_I2CChecksum, &nr_value); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: Channel %d\n", + __func__, chn); + goto check; + } + if ((nr_value & 0xff) != block->pchksum) { + dev_err(tas_dev->dev, + "Block PChkSum Channel %d ", chn); + dev_err(tas_dev->dev, + "FW = 0x%x, Reg = 0x%x\n", + block->pchksum, + (nr_value & 0xff)); + ret = -EAGAIN; + tas_dev->tasdevice[chn].err_code |= + ERROR_PRAM_CRCCHK; + goto check; + } + ret = 0; + tas_dev->tasdevice[chn].err_code &= + ~ERROR_PRAM_CRCCHK; + } + + if (block->is_ychksum_present) { + //TBD, open it when FW ready + dev_err(tas_dev->dev, + "Block YChkSum: FW = 0x%x, YCRC = 0x%x\n", + block->ychksum, crc_chksum); + + tas_dev->tasdevice[chn].err_code &= + ~ERROR_YRAM_CRCCHK; + ret = 0; + } +check: + if (ret == -EAGAIN) { + nr_retry--; + if (nr_retry > 0) + goto start; + else { + if ((block->type == MAIN_ALL_DEVICES) + || (block->type == MAIN_DEVICE_A) + || (block->type == MAIN_DEVICE_B) + || (block->type == MAIN_DEVICE_C) + || (block->type == MAIN_DEVICE_D)) + tas_dev->tasdevice[chn].cur_prog = -1; + else + tas_dev->tasdevice[chn].cur_conf = -1; + nr_retry = 6; + } + } + } +end: + if (ret < 0) + dev_err(tas_dev->dev, "Block (%d) load error\n", block->type); + + return ret; +} + + +static int tasdevice_load_data(struct tasdevice_priv *tas_dev, + struct tasdevice_data *dev_data) +{ + int ret = 0; + unsigned int nr_block = 0; + struct tasdev_blk *block = NULL; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tas_dev->tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +static int tasdevice_load_calibrated_data( + struct tasdevice_priv *tas_dev, struct tasdevice_data *dev_data) +{ + int ret = 0; + unsigned int nr_block = 0; + struct tasdev_blk *block = NULL; + + for (nr_block = 0; nr_block < dev_data->nr_blk; nr_block++) { + block = &(dev_data->dev_blks[nr_block]); + ret = tasdevice_load_block(tas_dev, block); + if (ret < 0) + break; + } + + return ret; +} + +int tas2781_load_calibration(void *context, + char *file_name, enum channel i) +{ + int ret = 0, offset = 0; + struct firmware fmw; + const struct firmware *fw_entry = NULL; + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *)context; + struct tasdevice *tasdev = &(tas_dev->tasdevice[i]); + struct tasdevice_fw *tas_fmw = NULL; + + ret = request_firmware(&fw_entry, file_name, tas_dev->dev); + if (!ret) { + if (!fw_entry->size) { + dev_err(tas_dev->dev, + "%s: file read error: size = %lu\n", + __func__, (unsigned long)fw_entry->size); + goto out; + } + fmw.size = fw_entry->size; + fmw.data = fw_entry->data; + } else { + dev_info(tas_dev->dev, + "%s: Request firmware %s failed\n", + __func__, file_name); + goto out; + } + + tas_fmw = tasdev->cali_data_fmw = kcalloc(1, + sizeof(struct tasdevice_fw), GFP_KERNEL); + if (tasdev->cali_data_fmw == NULL) { + dev_err(tas_dev->dev, "%s: FW memory failed!\n", __func__); + ret = -1; + goto out; + } + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, "%s: fw_parse_header EXIT!\n", __func__); + goto out; + } + offset = fw_parse_variable_hdr_cal(tas_dev, tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, + "%s: fw_parse_variable_header_cal EXIT!\n", __func__); + goto out; + } + offset = fw_parse_program_data(tas_dev, tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, "%s: fw_parse_program_data EXIT!\n", + __func__); + goto out; + } + offset = fw_parse_configuration_data(tas_dev, tas_fmw, &fmw, + offset); + if (offset == -1) { + dev_err(tas_dev->dev, + "%s: fw_parse_configuration_data EXIT!\n", __func__); + goto out; + } + offset = fw_parse_calibration_data(tas_dev, + tas_fmw, &fmw, offset); + if (offset == -1) { + dev_err(tas_dev->dev, "%s: fw_parse_calibration_data EXIT!\n", + __func__); + goto out; + } + tasdev->is_calibrated_data_loaded = true; +out: + if (fw_entry) { + release_firmware(fw_entry); + fw_entry = NULL; + } + return ret; +} + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_fw *tas_fmw = NULL; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = NULL; + int offset = 0, ret = 0; + + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, "%s: Failed to read firmware %s\n", + __func__, tas_dev->coef_binaryname); + ret = -1; + goto out; + } + + tas_dev->fmw = kcalloc(1, + sizeof(struct tasdevice_fw), GFP_KERNEL); + if (tas_dev->fmw == NULL) { + ret = -1; + goto out; + } + tas_fmw = tas_dev->fmw; + tas_fmw->dev = tas_dev->dev; + offset = fw_parse_header(tas_dev, tas_fmw, fmw, offset); + + if (offset == -1) + goto out; + fw_fixed_hdr = &(tas_fmw->fw_hdr.fixed_hdr); + switch (fw_fixed_hdr->drv_ver) { + case 0x301: + case 0x302: + case 0x502: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + break; + case 0x202: + case 0x400: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + if (fw_fixed_hdr->drv_ver == 0x100) { + if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_dev->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_dev->tasdevice_load_block = + tasdevice_load_block_kernel; + tas_dev->fw_parse_calibration_data = NULL; + } else { + switch (fw_fixed_hdr->ppcver) { + case 0x00: + tas_dev->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_dev->fw_parse_program_data = + fw_parse_program_data; + tas_dev->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_dev->fw_parse_calibration_data = + fw_parse_calibration_data; + tas_dev->tasdevice_load_block = + tasdevice_load_block; + break; + default: + dev_err(tas_dev->dev, + "%s: PPCVersion must be 0x0 or 0x%02x", + __func__, PPC3_VERSION); + dev_err(tas_dev->dev, " Current:0x%02x\n", + fw_fixed_hdr->ppcver); + offset = -1; + break; + } + } + } else { + dev_err(tas_dev->dev, + "%s: DriverVersion must be 0x0, 0x230 or above 0x230 ", + __func__); + dev_err(tas_dev->dev, "current is 0x%02x\n", + fw_fixed_hdr->drv_ver); + offset = -1; + } + break; + } + + offset = tas_dev->fw_parse_variable_header(tas_dev, fmw, offset); + if (offset == -1) + goto out; + + offset = tas_dev->fw_parse_program_data(tas_dev, tas_fmw, fmw, + offset); + if (offset < 0) { + ret = -1; + goto out; + } + offset = tas_dev->fw_parse_configuration_data(tas_dev, + tas_fmw, fmw, offset); + if (offset < 0) + ret = -1; + +out: + return ret; +} + +void tasdevice_calbin_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice *tasdev = NULL; + int i = 0; + + if (tas_dev) { + for (i = 0; i < tas_dev->ndev; i++) { + tasdev = &(tas_dev->tasdevice[i]); + if (tasdev->cali_data_fmw) { + tas2781_clear_calfirmware( + tasdev->cali_data_fmw); + tasdev->cali_data_fmw = NULL; + } + } + } +} + +void tasdevice_dsp_remove(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + int i; + struct tasdev_blk *blk; + unsigned int nr_blk; + + if (tas_dev->fmw) { + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + + if (tas_fmw->programs) { + struct tasdevice_prog *program; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + program = &(tas_fmw->programs[i]); + if (program) { + struct tasdevice_data + *im = &(program->dev_data); + + if (!im->dev_blks) + continue; + + for (nr_blk = 0; nr_blk < im->nr_blk; + nr_blk++) { + blk = + &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); + } + } + kfree(tas_fmw->programs); + } + + if (tas_fmw->configs) { + struct tasdevice_config *config; + + for (i = 0; i < tas_fmw->nr_configurations; i++) { + config = &(tas_fmw->configs[i]); + if (config) { + struct tasdevice_data + *im = &(config->dev_data); + + if (!im->dev_blks) + continue; + for (nr_blk = 0; nr_blk < im->nr_blk; + nr_blk++) { + blk = + &(im->dev_blks[nr_blk]); + kfree(blk->data); + } + kfree(im->dev_blks); + } + } + kfree(tas_fmw->configs); + } + kfree(tas_fmw); + tas_dev->fmw = NULL; + } +} + +static int tas2781_set_calibration(void *context, enum channel i, + int n_calibration) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + int ret = 0; + struct tasdevice *tasdevice = &(tas_dev->tasdevice[i]); + struct tasdevice_fw *cal_fmw = tasdevice->cali_data_fmw; + + if ((!tas_dev->fmw->programs) + || (!tas_dev->fmw->configs)) { + dev_err(tas_dev->dev, "%s, Firmware not loaded\n\r", __func__); + ret = 0; + goto out; + } + + if (n_calibration == 0xFF || (n_calibration == 0x100 + && tasdevice->is_calibrated_data_loaded == false)) { + if (cal_fmw) { + tasdevice->is_calibrated_data_loaded = false; + tas2781_clear_calfirmware(cal_fmw); + cal_fmw = NULL; + } + + scnprintf(tas_dev->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", + tas_dev->dev_name, tas_dev->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_dev, + tas_dev->cal_binaryname[i], i); + if (ret != 0) { + dev_err(tas_dev->dev, + "%s: load %s error, no-side effect\n", + __func__, tas_dev->cal_binaryname[i]); + ret = 0; + } + } + tasdevice->is_loading = true; + tasdevice->is_loaderr = false; + + if (cal_fmw) { + struct tasdevice_calibration *calibration = + cal_fmw->calibrations; + + if (calibration) + tasdevice_load_calibrated_data(tas_dev, + &(calibration->dev_data)); + } else + dev_err(tas_dev->dev, + "%s: No calibrated data for device %d\n", __func__, i); + +out: + return ret; +} + +int tasdevice_select_tuningprm_cfg(void *context, int prm_no, + int cfg_no, int rca_conf_no) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + struct tasdevice_config *conf = NULL; + struct tasdevice_prog *program = NULL; + int i = 0; + int status = 0; + int prog_status = 0; + + if (tas_fmw == NULL) { + dev_err(tas_dev->dev, "%s: Firmware is NULL\n", __func__); + goto out; + } + + if (cfg_no >= tas_fmw->nr_configurations) { + dev_err(tas_dev->dev, + "%s: cfg(%d) is not in range of conf %u\n", + __func__, cfg_no, tas_fmw->nr_configurations); + goto out; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_dev->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + goto out; + } + + if (rca_conf_no > rca->ncfgs || rca_conf_no <= 0 || + cfg_info == NULL) { + dev_err(tas_dev->dev, + "conf_no:%d should be in range from 0 to %u\n", + rca_conf_no, rca->ncfgs-1); + goto out; + } + + conf = &(tas_fmw->configs[cfg_no]); + for (i = 0; i < tas_dev->ndev; i++) { + if (cfg_info[rca_conf_no]->active_dev & (1 << i)) { + if (tas_dev->tasdevice[i].cur_prog != prm_no) { + tas_dev->tasdevice[i].cur_conf = -1; + tas_dev->tasdevice[i].is_loading = true; + prog_status++; + } + } else + tas_dev->tasdevice[i].is_loading = false; + tas_dev->tasdevice[i].is_loaderr = false; + } + + if (prog_status) { + program = &(tas_fmw->programs[prm_no]); + tasdevice_load_data(tas_dev, &(program->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) + continue; + else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) { + struct tasdevice_fw *cal_fmw = + tas_dev->tasdevice[i].cali_data_fmw; + + if (cal_fmw) { + struct tasdevice_calibration + *calibration = + cal_fmw->calibrations; + + if (calibration) + tasdevice_load_calibrated_data( + tas_dev, + &(calibration->dev_data)); + } + tas_dev->tasdevice[i].cur_prog = prm_no; + } + } + } + + if (tas_dev->is_glb_calibrated_data_loaded == false) { + for (i = 0; i < tas_dev->ndev; i++) + tas2781_set_calibration(tas_dev, i, 0x100); + tas_dev->is_glb_calibrated_data_loaded = true; + /* No wise to reload calibrationdata everytime, + * this code will work once even if calibrated + * data still failed to be got + */ + } + + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].cur_conf != cfg_no + && (cfg_info[rca_conf_no]->active_dev & (1 << i)) + && (tas_dev->tasdevice[i].is_loaderr == false)) { + status++; + tas_dev->tasdevice[i].is_loading = true; + } else + tas_dev->tasdevice[i].is_loading = false; + } + + if (status) { + status = 0; + tasdevice_load_data(tas_dev, &(conf->dev_data)); + for (i = 0; i < tas_dev->ndev; i++) { + if (tas_dev->tasdevice[i].is_loaderr == true) { + status |= 1 << (i + 4); + continue; + } else if (tas_dev->tasdevice[i].is_loaderr == false + && tas_dev->tasdevice[i].is_loading == true) + tas_dev->tasdevice[i].cur_conf = cfg_no; + } + } else + dev_err(tas_dev->dev, + "%s: No device is in active in conf %d\n", + __func__, rca_conf_no); + + status |= cfg_info[rca_conf_no]->active_dev; +out: + return prog_status; +} diff --git a/sound/soc/codecs/tas2781-dsp.h b/sound/soc/codecs/tas2781-dsp.h new file mode 100644 index 000000000000..26a6f5796349 --- /dev/null +++ b/sound/soc/codecs/tas2781-dsp.h @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TASDEVICE_DSP_H__ +#define __TASDEVICE_DSP_H__ + +#define MAIN_ALL_DEVICES 0x0d +#define MAIN_DEVICE_A 0x01 +#define MAIN_DEVICE_B 0x08 +#define MAIN_DEVICE_C 0x10 +#define MAIN_DEVICE_D 0x14 +#define COEFF_DEVICE_A 0x03 +#define COEFF_DEVICE_B 0x0a +#define COEFF_DEVICE_C 0x11 +#define COEFF_DEVICE_D 0x15 +#define PRE_DEVICE_A 0x04 +#define PRE_DEVICE_B 0x0b +#define PRE_DEVICE_C 0x12 +#define PRE_DEVICE_D 0x16 + +#define PPC3_VERSION 0x4100 +#define RCA_CONFIGID_BYPASS_ALL 0 +#define TASDEVICE_DEVICE_SUM 8 +#define TASDEVICE_CONFIG_SUM 64 + +enum channel { + top_left_Chn, + top_right_chn, + bottom_left_Chn, + bottom_right_chn, + max_chn, +}; + +enum tasdevice_dsp_dev_idx { + TASDEVICE_DSP_TAS_2555 = 0, + TASDEVICE_DSP_TAS_2555_STEREO, + TASDEVICE_DSP_TAS_2557_MONO, + TASDEVICE_DSP_TAS_2557_DUAL_MONO, + TASDEVICE_DSP_TAS_2559, + TASDEVICE_DSP_TAS_2563, + TASDEVICE_DSP_TAS_2563_DUAL_MONO = 7, + TASDEVICE_DSP_TAS_2563_QUAD, + TASDEVICE_DSP_TAS_2563_21, + TASDEVICE_DSP_TAS_2781, + TASDEVICE_DSP_TAS_2781_DUAL_MONO, + TASDEVICE_DSP_TAS_2781_21, + TASDEVICE_DSP_TAS_2781_QUAD, + TASDEVICE_DSP_TAS_MAX_DEVICE +}; + +struct tasdevice_fw_fixed_hdr { + unsigned int fwsize; + unsigned int ppcver; + unsigned int drv_ver; +}; + +struct tasdevice_dspfw_hdr { + struct tasdevice_fw_fixed_hdr fixed_hdr; + unsigned short device_family; + unsigned short device; + unsigned char ndev; +}; + +struct tasdev_blk { + unsigned int type; + unsigned char is_pchksum_present; + unsigned char pchksum; + unsigned char is_ychksum_present; + unsigned char ychksum; + unsigned int nr_cmds; + unsigned int blk_size; + unsigned int nr_subblocks; + unsigned char *data; +}; + +struct tasdevice_data { + char name[64]; + unsigned int nr_blk; + struct tasdev_blk *dev_blks; +}; +struct tasdevice_prog { + unsigned int prog_size; + struct tasdevice_data dev_data; +}; + +struct tasdevice_config { + unsigned int cfg_size; + char name[64]; + struct tasdevice_data dev_data; +}; + +struct tasdevice_calibration { + struct tasdevice_data dev_data; +}; + +struct tasdevice_fw { + struct tasdevice_dspfw_hdr fw_hdr; + unsigned short nr_programs; + struct tasdevice_prog *programs; + unsigned short nr_configurations; + struct tasdevice_config *configs; + unsigned short nr_calibrations; + struct tasdevice_calibration *calibrations; + struct device *dev; +}; + +enum tasdevice_dsp_fw_state { + TASDEVICE_DSP_FW_NONE = 0, + TASDEVICE_DSP_FW_PENDING, + TASDEVICE_DSP_FW_FAIL, + TASDEVICE_DSP_FW_ALL_OK, +}; + +enum tasdevice_bin_blk_type { + TASDEVICE_BIN_BLK_COEFF = 1, + TASDEVICE_BIN_BLK_POST_POWER_UP, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN, + TASDEVICE_BIN_BLK_PRE_POWER_UP, + TASDEVICE_BIN_BLK_POST_SHUTDOWN +}; + +struct tasdevice_rca_hdr { + unsigned int img_sz; + unsigned int checksum; + unsigned int binary_version_num; + unsigned int drv_fw_version; + unsigned char plat_type; + unsigned char dev_family; + unsigned char reserve; + unsigned char ndev; + unsigned char devs[TASDEVICE_DEVICE_SUM]; + unsigned int nconfig; + unsigned int config_size[TASDEVICE_CONFIG_SUM]; +}; + +struct tasdev_blk_data { + unsigned char dev_idx; + unsigned char block_type; + unsigned short yram_checksum; + unsigned int block_size; + unsigned int n_subblks; + unsigned char *regdata; +}; + +struct tasdevice_config_info { + unsigned int nblocks; + unsigned int real_nblocks; + unsigned char active_dev; + struct tasdev_blk_data **blk_data; +}; + +struct tasdevice_rca { + struct tasdevice_rca_hdr fw_hdr; + int ncfgs; + struct tasdevice_config_info **cfg_info; + int profile_cfg_id; +}; + +int tasdevice_dspfw_ready(const struct firmware *fmw, void *context); +void tasdevice_dsp_remove(void *context); +void tasdevice_calbin_remove(void *context); +int tas2781_load_calibration(void *tas_dev, char *filename, + enum channel i); +int tasdevice_select_tuningprm_cfg(void *context, int prm, + int cfg_no, int rca_conf_no); + +#endif diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c new file mode 100644 index 000000000000..f097b3d52ec4 --- /dev/null +++ b/sound/soc/codecs/tas2781-i2c.c @@ -0,0 +1,1660 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/init.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/of_gpio.h> +#include <linux/interrupt.h> +#include <sound/soc.h> +#include <sound/pcm_params.h> +#include <sound/tlv.h> +#include <linux/crc8.h> + +#include "tas2781.h" + +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d + +const char *blocktype[5] = { + "COEFF", + "POST_POWER_UP", + "PRE_SHUTDOWN", + "PRE_POWER_UP", + "POST_SHUTDOWN" +}; + +static const char * const dts_dev_addr_tag[] = { + "topleft-channel", + "topright-channel", + "bottomleft-channel", + "bottomright-channel" +}; + +static const struct i2c_device_id tasdevice_id[] = { + { "tas2781", TAS2781 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tasdevice_id); + +static const struct regmap_range_cfg tasdevice_ranges[] = { + { + .range_min = 0, + .range_max = 256 * 128, + .selector_reg = TASDEVICE_PAGE_SELECT, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 128, + }, +}; + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 16, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .ranges = tasdevice_ranges, + .num_ranges = ARRAY_SIZE(tasdevice_ranges), + .max_register = 256 * 128, +}; + +static const struct of_device_id tasdevice_of_match[] = { + { .compatible = "ti,tas2781" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, tasdevice_of_match); + +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *)context; + unsigned char subblk_typ = data[1]; + int subblk_offset = 2; + int chn = 0, chnend = 0; + int rc = 0; + int blktyp = dev_idx & 0xC0, idx = dev_idx & 0x3F; + bool is_err = false; + + if (idx) { + chn = idx-1; + chnend = idx; + } else { + if (tas_dev->set_global_mode) { + chn = tas_dev->ndev; + chnend = tas_dev->ndev + 1; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + } + + for (; chn < chnend; chn++) { + if (tas_dev->set_global_mode == NULL && + tas_dev->tasdevice[chn].is_loading == false) + continue; + + is_err = false; + subblk_offset = 2; + switch (subblk_typ) { + case TASDEVICE_CMD_SING_W: { + int i = 0; + unsigned short len = SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 * len > sublocksize) { + dev_err(tas_dev->dev, + "process_block: Out of bounary\n"); + is_err = true; + break; + } + + for (i = 0; i < len; i++) { + rc = tasdevice_dev_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + data[subblk_offset + 3]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "process_block: single write error\n"); + } + subblk_offset += 4; + } + } + break; + case TASDEVICE_CMD_BURST: { + unsigned short len = + SMS_HTONS(data[2], data[3]); + + subblk_offset += 2; + if (subblk_offset + 4 + len > sublocksize) { + dev_err(tas_dev->dev, + "%s: BST Out of bounary\n", __func__); + is_err = true; + break; + } + if (len % 4) { + dev_err(tas_dev->dev, + "%s:Bst-len(%u)not div by 4\n", + __func__, len); + break; + } + + rc = tasdevice_dev_bulk_write(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + &(data[subblk_offset + 4]), + len); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: bulk_write error = %d\n", + __func__, rc); + } + subblk_offset += (len + 4); + } + break; + case TASDEVICE_CMD_DELAY: { + unsigned short delay_time = 0; + + if (subblk_offset + 2 > sublocksize) { + dev_err(tas_dev->dev, + "%s: deley Out of bounary\n", + __func__); + is_err = true; + break; + } + delay_time = SMS_HTONS(data[2], data[3]); + usleep_range(delay_time*1000, delay_time*1000); + subblk_offset += 2; + } + break; + case TASDEVICE_CMD_FIELD_W: + if (subblk_offset + 6 > sublocksize) { + dev_err(tas_dev->dev, + "%s: bit write Out of bounary\n", + __func__); + is_err = true; + break; + } + rc = tasdevice_dev_update_bits(tas_dev, chn, + TASDEVICE_REG(data[subblk_offset + 2], + data[subblk_offset + 3], + data[subblk_offset + 4]), + data[subblk_offset + 1], + data[subblk_offset + 5]); + if (rc < 0) { + is_err = true; + dev_err(tas_dev->dev, + "%s: update_bits error = %d\n", + __func__, rc); + } + subblk_offset += 6; + break; + default: + break; + }; + if (is_err == true && blktyp != 0) { + if (blktyp == 0x80) { + tas_dev->tasdevice[chn].cur_prog = -1; + tas_dev->tasdevice[chn].cur_conf = -1; + } else + tas_dev->tasdevice[chn].cur_conf = -1; + } + } + return subblk_offset; +} + +static void tasdevice_select_cfg_blk(void *pContext, int conf_no, + unsigned char block_type) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) pContext; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + int j = 0, k = 0, chn = 0, chnend = 0; + + if (conf_no >= rca->ncfgs || conf_no < 0 || NULL == cfg_info) { + dev_err(tas_dev->dev, + "conf_no should be not more than %u\n", + rca->ncfgs); + goto out; + } + + for (j = 0; j < (int)cfg_info[conf_no]->real_nblocks; j++) { + unsigned int length = 0, rc = 0; + + if (block_type > 5 || block_type < 2) { + dev_err(tas_dev->dev, + "ERROR!!!block_type should be in range from 2 to 5\n"); + goto out; + } + if (block_type != cfg_info[conf_no]->blk_data[j]->block_type) + continue; + + for (k = 0; k < (int)cfg_info[conf_no]->blk_data[j] + ->n_subblks; k++) { + if (cfg_info[conf_no]->blk_data[j]->dev_idx) { + chn = + cfg_info[conf_no]->blk_data[j]->dev_idx + - 1; + chnend = + cfg_info[conf_no]->blk_data[j]->dev_idx; + } else { + chn = 0; + chnend = tas_dev->ndev; + } + for (; chn < chnend; chn++) + tas_dev->tasdevice[chn].is_loading = true; + + rc = tasdevice_process_block(tas_dev, + cfg_info[conf_no]->blk_data[j]->regdata + + length, + cfg_info[conf_no]->blk_data[j]->dev_idx, + cfg_info[conf_no]->blk_data[j]->block_size - + length); + length += rc; + if (cfg_info[conf_no]->blk_data[j]->block_size < + length) { + dev_err(tas_dev->dev, + "%s: ERROR:%u %u out of bounary\n", + __func__, length, + cfg_info[conf_no]->blk_data[j] + ->block_size); + break; + } + } + if (length != cfg_info[conf_no]->blk_data[j]->block_size) + dev_err(tas_dev->dev, + "%s: %u %u size is not same\n", + __func__, length, + cfg_info[conf_no]->blk_data[j]->block_size); + + } + +out: + return; +} + +static struct tasdevice_config_info *tasdevice_add_config( + void *context, unsigned char *config_data, + unsigned int config_size) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *)context; + struct tasdevice_config_info *cfg_info = NULL; + int config_offset = 0, i = 0; + + cfg_info = kzalloc( + sizeof(struct tasdevice_config_info), GFP_KERNEL); + if (!cfg_info) + goto out; + + if (tas_dev->rcabin.fw_hdr.binary_version_num >= 0x105) { + if (config_offset + 64 > (int)config_size) { + dev_err(tas_dev->dev, + "add config: Out of bounary\n"); + goto out; + } + config_offset += 64; + } + + if (config_offset + 4 > (int)config_size) { + dev_err(tas_dev->dev, + "add config: Out of bounary\n"); + goto out; + } + cfg_info->nblocks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data = kcalloc( + cfg_info->nblocks, sizeof(struct tasdev_blk_data *), + GFP_KERNEL); + if (!cfg_info->blk_data) + goto out; + + cfg_info->real_nblocks = 0; + for (i = 0; i < (int)cfg_info->nblocks; i++) { + if (config_offset + 12 > config_size) { + dev_err(tas_dev->dev, + "add config: Out of bounary: i = %d nblocks = %u!\n", + i, cfg_info->nblocks); + break; + } + cfg_info->blk_data[i] = kzalloc( + sizeof(struct tasdev_blk_data), GFP_KERNEL); + if (!cfg_info->blk_data[i]) + break; + + cfg_info->blk_data[i]->dev_idx = config_data[config_offset]; + config_offset++; + + cfg_info->blk_data[i]->block_type = config_data[config_offset]; + config_offset++; + + if (cfg_info->blk_data[i]->block_type == + TASDEVICE_BIN_BLK_PRE_POWER_UP) { + if (cfg_info->blk_data[i]->dev_idx == 0) { + cfg_info->active_dev = 1; + } else { + cfg_info->active_dev = + 1 << + (cfg_info->blk_data[i]->dev_idx - 1); + } + } + cfg_info->blk_data[i]->yram_checksum = + SMS_HTONS(config_data[config_offset], + config_data[config_offset + 1]); + config_offset += 2; + cfg_info->blk_data[i]->block_size = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + config_offset += 4; + + cfg_info->blk_data[i]->n_subblks = + SMS_HTONL(config_data[config_offset], + config_data[config_offset + 1], + config_data[config_offset + 2], + config_data[config_offset + 3]); + + config_offset += 4; + cfg_info->blk_data[i]->regdata = kzalloc( + cfg_info->blk_data[i]->block_size, GFP_KERNEL); + if (cfg_info->blk_data[i]->regdata == 0) + goto out; + + if (config_offset + cfg_info->blk_data[i]->block_size + > config_size) { + dev_err(tas_dev->dev, + "%s: block_size Out of bounary: i = %d blks = %u!\n", + __func__, i, cfg_info->nblocks); + break; + } + memcpy(cfg_info->blk_data[i]->regdata, + &config_data[config_offset], + cfg_info->blk_data[i]->block_size); + config_offset += cfg_info->blk_data[i]->block_size; + cfg_info->real_nblocks += 1; + } +out: + return cfg_info; +} + +// tas2781 contain book and page two-level regmap, especially book switching +// will set two registers, one is BXXPXXR00, the other is B0P0R7F, after +// switching to the correct book, then leverage the mechanism for paging to +// access the register. Custom control is primarily for regmap booking, +// paging depends on internal regmap mechanism +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned int invert = mc->invert; + int max = mc->max; + int ret = 0; + + /* Read the primary device as the whole */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, + "%s, get digital vol error\n", + __func__); + goto out; + } + + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned int invert = mc->invert; + int max = mc->max; + int i, ret = 0; + + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + + if (tas_dev->set_global_mode != NULL) { + ret = tasdevice_dev_write(tas_dev, tas_dev->ndev, + mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_dev->dev, + "%s, set digital vol error in global mode\n", + __func__); + } else { + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, + mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_dev->dev, + "%s, set digital vol error in device %d\n", + __func__, i); + } + } + + return 1; +} + +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned char mask = 0; + int max = mc->max; + int ret = 0; + unsigned int invert = mc->invert; + + /* Read the primary device */ + ret = tasdevice_dev_read(tas_dev, 0, mc->reg, &val); + if (ret) { + dev_err(tas_dev->dev, + "%s, get AMP vol error\n", + __func__); + goto out; + } + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + int i, ret = 0; + unsigned char mask = 0; + int max = mc->max; + unsigned int invert = mc->invert; + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + mc->reg, mask, (unsigned int)(val << mc->shift)); + if (ret) + dev_err(tas_dev->dev, + "%s, set AMP vol error in device %d\n", + __func__, i); + } + + return 1; +} + +static const DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); +static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); + +static const struct snd_kcontrol_new tas2781_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), +}; + +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + + tas_dev->rcabin.profile_cfg_id = + ucontrol->value.integer.value[0]; + + return 1; +} + +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_programs; + + return 0; +} + +static int tasdevice_info_configurations( + struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct tasdevice_fw *tas_fw = tas_dev->fmw; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_fw->nr_configurations - 1; + + + return 0; +} + +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + + uinfo->count = 1; + uinfo->value.integer.min = 1; + uinfo->value.integer.max = max(0, tas_dev->rcabin.ncfgs); + + return 0; +} + +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev + = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = + tas_dev->rcabin.profile_cfg_id; + + return 0; +} + +static int tasdevice_create_controls(struct tasdevice_priv *tas_dev) +{ + int nr_controls = 1, ret = 0, mix_index = 0; + char *name = NULL; + struct snd_kcontrol_new *tasdevice_profile_controls = NULL; + + tasdevice_profile_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_profile_controls[0]), + GFP_KERNEL); + if (tasdevice_profile_controls == NULL) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!name) { + ret = -ENOMEM; + goto out; + } + scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "TASDEVICE Profile id"); + tasdevice_profile_controls[mix_index].name = name; + tasdevice_profile_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_profile_controls[mix_index].info = + tasdevice_info_profile; + tasdevice_profile_controls[mix_index].get = + tasdevice_get_profile_id; + tasdevice_profile_controls[mix_index].put = + tasdevice_set_profile_id; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_profile_controls, + nr_controls < mix_index ? nr_controls : mix_index); + + tas_dev->tas_ctrl.nr_controls = + nr_controls < mix_index ? nr_controls : mix_index; +out: + return ret; +} + +static int tasdevice_program_get(struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *pTAS2781 = snd_soc_component_get_drvdata(codec); + + pValue->value.integer.value[0] = pTAS2781->cur_prog; + + return 0; +} + +static int tasdevice_program_put(struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *pTAS2781 = snd_soc_component_get_drvdata(codec); + unsigned int nProgram = pValue->value.integer.value[0]; + + pTAS2781->cur_prog = nProgram; + + return 1; +} + +static int tasdevice_configuration_get( + struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *pTAS2781 = snd_soc_component_get_drvdata(codec); + + pValue->value.integer.value[0] = pTAS2781->cur_conf; + + return 0; +} + +static int tasdevice_configuration_put( + struct snd_kcontrol *pKcontrol, + struct snd_ctl_elem_value *pValue) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(pKcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int n_configuration = pValue->value.integer.value[0]; + + tas_dev->cur_conf = n_configuration; + + return 1; +} + +static int tasdevice_dsp_create_control( + struct tasdevice_priv *tas_dev) +{ + int nr_controls = 2, ret = 0, mix_index = 0; + char *program_name = NULL; + char *configuration_name = NULL; + struct snd_kcontrol_new *tasdevice_dsp_controls = NULL; + + tasdevice_dsp_controls = devm_kzalloc(tas_dev->dev, + nr_controls * sizeof(tasdevice_dsp_controls[0]), + GFP_KERNEL); + if (tasdevice_dsp_controls == NULL) { + ret = -ENOMEM; + goto out; + } + + /* Create a mixer item for selecting the active profile */ + program_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + configuration_name = devm_kzalloc(tas_dev->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + if (!program_name || !configuration_name) { + ret = -ENOMEM; + goto out; + } + + scnprintf(program_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "Program"); + tasdevice_dsp_controls[mix_index].name = program_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_programs; + tasdevice_dsp_controls[mix_index].get = + tasdevice_program_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_program_put; + mix_index++; + + scnprintf(configuration_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "Configuration"); + tasdevice_dsp_controls[mix_index].name = configuration_name; + tasdevice_dsp_controls[mix_index].iface = + SNDRV_CTL_ELEM_IFACE_MIXER; + tasdevice_dsp_controls[mix_index].info = + tasdevice_info_configurations; + tasdevice_dsp_controls[mix_index].get = + tasdevice_configuration_get; + tasdevice_dsp_controls[mix_index].put = + tasdevice_configuration_put; + mix_index++; + + ret = snd_soc_add_component_controls(tas_dev->codec, + tasdevice_dsp_controls, + nr_controls < mix_index ? nr_controls : mix_index); + + tas_dev->tas_ctrl.nr_controls += nr_controls; +out: + return ret; +} + +static void tasdevice_rca_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = NULL; + struct tasdevice_rca_hdr *fw_hdr = NULL; + struct tasdevice_config_info **cfg_info = NULL; + const struct firmware *fw_entry = NULL; + unsigned char *buf = NULL; + int offset = 0, i = 0; + unsigned int total_config_sz = 0; + int ret = 0; + + mutex_lock(&tas_dev->codec_lock); + rca = &(tas_dev->rcabin); + fw_hdr = &(rca->fw_hdr); + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, + "Failed to read %s, no side - effect on driver running\n", + tas_dev->rca_binaryname); + ret = -1; + goto out; + } + buf = (unsigned char *)fmw->data; + + fw_hdr->img_sz = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + if (fw_hdr->img_sz != fmw->size) { + dev_err(tas_dev->dev, + "File size not match, %d %u", (int)fmw->size, + fw_hdr->img_sz); + ret = -1; + goto out; + } + + fw_hdr->checksum = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + fw_hdr->binary_version_num = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + if (fw_hdr->binary_version_num < 0x103) { + dev_err(tas_dev->dev, + "File version 0x%04x is too low", + fw_hdr->binary_version_num); + ret = -1; + goto out; + } + offset += 4; + fw_hdr->drv_fw_version = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 8; + fw_hdr->plat_type = buf[offset]; + offset += 1; + fw_hdr->dev_family = buf[offset]; + offset += 1; + fw_hdr->reserve = buf[offset]; + offset += 1; + fw_hdr->ndev = buf[offset]; + offset += 1; + if (fw_hdr->ndev != tas_dev->ndev) { + dev_err(tas_dev->dev, + "ndev(%u) from rcabin and ndev(%u) from DTS does not match\n", + fw_hdr->ndev, + tas_dev->ndev); + ret = -1; + goto out; + } + if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { + dev_err(tas_dev->dev, + "rca_ready: Out of bounary!\n"); + ret = -1; + goto out; + } + + for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) + fw_hdr->devs[i] = buf[offset]; + + fw_hdr->nconfig = SMS_HTONL(buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; + + for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { + fw_hdr->config_size[i] = SMS_HTONL(buf[offset], + buf[offset + 1], buf[offset + 2], buf[offset + 3]); + offset += 4; + total_config_sz += fw_hdr->config_size[i]; + } + + if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { + dev_err(tas_dev->dev, "Bin file error!\n"); + ret = -1; + goto out; + } + cfg_info = kcalloc(fw_hdr->nconfig, + sizeof(struct tasdevice_config_info *), + GFP_KERNEL); + + if (!cfg_info) { + ret = -1; + goto out; + } + rca->cfg_info = cfg_info; + rca->ncfgs = 0; + for (i = 0; i < (int)fw_hdr->nconfig; i++) { + cfg_info[i] = tasdevice_add_config(context, &buf[offset], + fw_hdr->config_size[i]); + if (!cfg_info[i]) { + ret = -1; + break; + } + offset += (int)fw_hdr->config_size[i]; + rca->ncfgs += 1; + } + tasdevice_create_controls(tas_dev); + + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; + scnprintf(tas_dev->coef_binaryname, 64, "%s_coef.bin", + tas_dev->dev_name); + ret = request_firmware(&fw_entry, tas_dev->coef_binaryname, + tas_dev->dev); + if (!ret) { + ret = tasdevice_dspfw_ready(fw_entry, tas_dev); + release_firmware(fw_entry); + fw_entry = NULL; + } else { + tas_dev->fw_state = TASDEVICE_DSP_FW_FAIL; + dev_err(tas_dev->dev, "%s: load %s error\n", __func__, + tas_dev->coef_binaryname); + goto out; + } + tasdevice_dsp_create_control(tas_dev); + + tas_dev->fw_state = TASDEVICE_DSP_FW_ALL_OK; + tas_dev->is_glb_calibrated_data_loaded = true; + for (i = 0; i < tas_dev->ndev; i++) { + scnprintf(tas_dev->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", + tas_dev->dev_name, tas_dev->tasdevice[i].dev_addr); + ret = tas2781_load_calibration(tas_dev, + tas_dev->cal_binaryname[i], i); + if (ret != 0) { + dev_err(tas_dev->dev, + "%s: load %s error, no-side effect\n", + __func__, + tas_dev->cal_binaryname[i]); + ret = 0; + tas_dev->is_glb_calibrated_data_loaded = false; + } + } + +out: + mutex_unlock(&tas_dev->codec_lock); + if (fmw) + release_firmware(fmw); +} + +static void tasdevice_config_info_remove(void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tasdevice_rca *rca = &(tas_dev->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + int i = 0, j = 0; + + mutex_lock(&tas_dev->dev_lock); + if (cfg_info) { + for (i = 0; i < rca->ncfgs; i++) { + if (cfg_info[i]) { + for (j = 0; j < (int)cfg_info[i]->real_nblocks; + j++) { + kfree( + cfg_info[i]->blk_data[j]->regdata); + kfree(cfg_info[i]->blk_data[j]); + } + kfree(cfg_info[i]->blk_data); + kfree(cfg_info[i]); + } + } + kfree(cfg_info); + } + mutex_unlock(&tas_dev->dev_lock); +} + +static void tasdevice_tuning_switch( + struct tasdevice_priv *tas_dev, int state) +{ + struct tasdevice_fw *tas_fmw = tas_dev->fmw; + int profile_cfg_id = 0; + int is_set_glb_mode = 0; + + if (state == 0) { + if (tas_fmw) { + if (tas_dev->cur_prog >= tas_fmw->nr_programs) + /*bypass all in rca is profile id 0*/ + profile_cfg_id = RCA_CONFIGID_BYPASS_ALL; + else { + /*dsp mode or tuning mode*/ + profile_cfg_id = + tas_dev->rcabin.profile_cfg_id; + + is_set_glb_mode = + tasdevice_select_tuningprm_cfg(tas_dev, + tas_dev->cur_prog, + tas_dev->cur_conf, + profile_cfg_id); + if (tas_dev->set_global_mode != NULL) + tas_dev->set_global_mode(tas_dev); + } + } else + profile_cfg_id = RCA_CONFIGID_BYPASS_ALL; + + tasdevice_select_cfg_blk(tas_dev, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + } else + tasdevice_select_cfg_blk(tas_dev, + tas_dev->rcabin.profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN); +} + +static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *codec = snd_soc_dapm_to_component(w->dapm); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int state = 1; + + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + if (event == SND_SOC_DAPM_PRE_PMD) + state = 0; + tasdevice_tuning_switch(tas_dev, state); + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + return 0; +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT_E("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0, tasdevice_dapm_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_SPK("SPK", tasdevice_dapm_event), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC") +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"SPK", NULL, "ASI"}, + {"OUT", NULL, "SPK"}, + {"ASI OUT", NULL, "DMIC"} +}; + +static int tasdevice_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *codec = dai->component; + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int ret = 0; + + if (tas_dev->fw_state != TASDEVICE_DSP_FW_ALL_OK) { + dev_err(tas_dev->dev, "DSP bin file not loaded\n"); + ret = -EINVAL; + } + return ret; +} + +static int tasdevice_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(dai); + unsigned int fsrate; + unsigned int slot_width; + int bclk_rate; + int rc = 0; + + fsrate = params_rate(params); + switch (fsrate) { + case 48000: + break; + case 44100: + break; + default: + dev_err(tas_dev->dev, + "%s: incorrect sample rate = %u\n", + __func__, fsrate); + rc = -EINVAL; + goto out; + } + + slot_width = params_width(params); + switch (slot_width) { + case 16: + break; + case 20: + break; + case 24: + break; + case 32: + break; + default: + dev_err(tas_dev->dev, + "%s: incorrect slot width = %u\n", + __func__, slot_width); + rc = -EINVAL; + goto out; + } + + bclk_rate = snd_soc_params_to_bclk(params); + if (bclk_rate < 0) { + dev_err(tas_dev->dev, + "%s: incorrect bclk rate = %d\n", + __func__, bclk_rate); + rc = bclk_rate; + goto out; + } +out: + return rc; +} + +static int tasdevice_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct tasdevice_priv *tas_dev = snd_soc_dai_get_drvdata(codec_dai); + + tas_dev->sysclk = freq; + + return 0; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .startup = tasdevice_startup, + .hw_params = tasdevice_hw_params, + .set_sysclk = tasdevice_set_dai_sysclk, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2781_codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static void tas2781_reset(struct tasdevice_priv *tas_dev) +{ + int ret = 0; + int i = 0; + + for (; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, + TAS2871_REG_SWRESET, + TAS2871_REG_SWRESET_RESET); + if (ret < 0) { + dev_err(tas_dev->dev, "%s: chn %d reset fail, %d\n", + __func__, i, ret); + continue; + } + } + usleep_range(1000, 1050); +} + +static int tasdevice_codec_probe( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + int ret; + + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + + crc8_populate_msb(tas_dev->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); + tas_dev->codec = codec; + scnprintf(tas_dev->rca_binaryname, 64, "%s_rca.bin", + tas_dev->dev_name); + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL, tas_dev, + tasdevice_rca_ready); + if (ret) + dev_err(tas_dev->dev, + "%s: request_firmware_nowait error:0x%08x\n", + __func__, ret); + + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + tas2781_reset(tas_dev); + if (tas_dev->set_global_mode != NULL) + tas_dev->set_global_mode(tas_dev); + + return ret; +} + +static void tasdevice_deinit(void *context) +{ + struct tasdevice_priv *tas_dev = (struct tasdevice_priv *) context; + + tasdevice_config_info_remove(tas_dev); + tasdevice_dsp_remove(tas_dev); + tasdevice_calbin_remove(tas_dev); + tas_dev->fw_state = TASDEVICE_DSP_FW_PENDING; +} + +static void tasdevice_codec_remove( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + tasdevice_deinit(tas_dev); + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_codec_probe, + .remove = tasdevice_codec_remove, + .controls = tas2781_snd_controls, + .num_controls = ARRAY_SIZE(tas2781_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_parse_dt(struct tasdevice_priv *tas_dev) +{ + struct device_node *np = tas_dev->dev->of_node; + int rc = 0, i = 0, ndev = 0; + unsigned int dev_addrs[max_chn]; + struct i2c_client *client = (struct i2c_client *)tas_dev->client; + + ndev = of_property_read_variable_u32_array(np, "ti,audio-slots", + dev_addrs, 0, ARRAY_SIZE(dev_addrs)); + if (ndev <= 0) { + ndev = 1; + dev_addrs[0] = client->addr; + } + + for (i = 0; i < ndev; i++) + tas_dev->tasdevice[i].dev_addr = dev_addrs[i]; + + if (ndev > 1) { + rc = of_property_read_u32(np, "ti,broadcast-addr", + &(tas_dev->glb_addr.dev_addr)); + if (rc) { + dev_err(tas_dev->dev, + "Looking up node %s failed %d\n", + np->full_name, rc); + tas_dev->glb_addr.dev_addr = 0; + } + } + + tas_dev->ndev = ndev; + + tas_dev->rst_gpio = of_get_named_gpio(np, "reset-gpios", i); + if (gpio_is_valid(tas_dev->rst_gpio)) { + rc = gpio_request(tas_dev->rst_gpio, "reset"); + if (!rc) + gpio_direction_output(tas_dev->rst_gpio, 1); + } + + strcpy(tas_dev->dev_name, tasdevice_id[tas_dev->chip_id].name); + + tas_dev->irq_info.irq_gpio = of_get_named_gpio(np, + "interrupts", 0); + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) { + rc = gpio_request(tas_dev->irq_info.irq_gpio, + "AUDEV-IRQ"); + if (!rc) { + gpio_direction_input( + tas_dev->irq_info.irq_gpio); + + tas_dev->irq_info.irq = + gpio_to_irq(tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, + "%s: GPIO %d request error\n", + __func__, + tas_dev->irq_info.irq_gpio); + } else + dev_err(tas_dev->dev, + "Looking up irq-gpio property in node %s failed %d\n", + np->full_name, + tas_dev->irq_info.irq_gpio); + + return 0; +} + +static int tasdevice_change_chn_book(struct tasdevice_priv *tas_dev, + enum channel chn, int book) +{ + int ret = 0; + struct i2c_client *client = + (struct i2c_client *)tas_dev->client; + + if (chn < tas_dev->ndev) { + if (tas_dev->glb_addr.ref_cnt != 0) { + tas_dev->glb_addr.ref_cnt = 0; + tas_dev->glb_addr.cur_book = -1; + } + client->addr = tas_dev->tasdevice[chn].dev_addr; + if (tas_dev->tasdevice[chn].cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_PAGE, 0); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + goto out; + } + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + goto out; + } + tas_dev->tasdevice[chn].cur_book = book; + } + } else if (chn == tas_dev->ndev) { + int i = 0; + + if (tas_dev->glb_addr.ref_cnt == 0) + for (i = 0; i < tas_dev->ndev; i++) + tas_dev->tasdevice[i].cur_book = -1; + client->addr = tas_dev->glb_addr.dev_addr; + if (tas_dev->glb_addr.cur_book != book) { + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_PAGE, 0); + if (ret < 0) { + dev_err(tas_dev->dev, + "%s, 0ERROR, E=%d\n", + __func__, ret); + goto out; + } + ret = regmap_write(tas_dev->regmap, + TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_dev->dev, + "%s, book%xERROR, E=%d\n", + __func__, book, ret); + goto out; + } + tas_dev->glb_addr.cur_book = book; + } + + tas_dev->glb_addr.ref_cnt++; + } else + dev_err(tas_dev->dev, + "%s, ERROR, no such channel(%d)\n", + __func__, chn); + +out: + return ret; +} + +int tasdevice_dev_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int *val) +{ + int ret = 0; + + mutex_lock(&tas_dev->dev_lock); + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), val); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR,E=%d\n", + __func__, ret); + } else { + + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + } + +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +int tasdevice_dev_write(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned int value) +{ + int ret = 0; + + mutex_lock(&tas_dev->dev_lock); + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + mutex_lock(&tas_dev->dev_lock); + if (chn <= tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_write(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_dev, + enum channel chn, unsigned int reg, unsigned char *data, + unsigned int len) +{ + int ret = 0; + + mutex_lock(&tas_dev->dev_lock); + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_bulk_read(tas_dev->regmap, + TASDEVICE_PGRG(reg), data, len); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tas_dev, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value) +{ + int ret = 0; + struct i2c_client *client = + (struct i2c_client *)tas_dev->client; + + mutex_lock(&tas_dev->dev_lock); + if (chn < tas_dev->ndev) { + ret = tasdevice_change_chn_book(tas_dev, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + client->addr = tas_dev->tasdevice[chn].dev_addr; + ret = regmap_update_bits(tas_dev->regmap, + TASDEVICE_PGRG(reg), mask, value); + if (ret < 0) + dev_err(tas_dev->dev, "%s, ERROR, E=%d\n", + __func__, ret); + } else { + dev_err(tas_dev->dev, "%s, ERROR, no such channel(%d)\n", + __func__, chn); + ret = -1; + } + +out: + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +static void tas2781_set_global_mode(struct tasdevice_priv *tas_dev) +{ + int i = 0; + int ret = 0; + + for (; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_dev, i, + TAS2871_MISC_CFG2, TAS2871_GLOBAL_ADDR_MASK, + TAS2871_GLOBAL_ADDR_ENABLE); + if (ret < 0) { + dev_err(tas_dev->dev, + "%s: chn %d set global fail, %d\n", + __func__, i, ret); + continue; + } + } +} + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret = 0, i = 0; + + tas_dev->cur_prog = -1; + tas_dev->cur_conf = -1; + + for (i = 0; i < tas_dev->ndev; i++) { + tas_dev->tasdevice[i].cur_book = -1; + tas_dev->tasdevice[i].cur_prog = -1; + tas_dev->tasdevice[i].cur_conf = -1; + } + mutex_init(&tas_dev->dev_lock); + if (tas_dev->glb_addr.dev_addr != 0 + && tas_dev->glb_addr.dev_addr < 0x7F) + tas_dev->set_global_mode = tas2781_set_global_mode; + dev_set_drvdata(tas_dev->dev, tas_dev); + + mutex_init(&tas_dev->codec_lock); + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:0x%08x\n", + __func__, ret); + goto out; + } + +out: + return ret; +} + +static void tasdevice_remove(struct tasdevice_priv *tas_dev) +{ + snd_soc_unregister_component(tas_dev->dev); + if (gpio_is_valid(tas_dev->rst_gpio)) + gpio_free(tas_dev->rst_gpio); + + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) + gpio_free(tas_dev->irq_info.irq_gpio); + + mutex_destroy(&tas_dev->dev_lock); + mutex_destroy(&tas_dev->codec_lock); +} + +static int tasdevice_i2c_probe(struct i2c_client *i2c) +{ + struct tasdevice_priv *tas_dev = NULL; + int ret = 0; + const struct i2c_device_id *id = i2c_match_id(tasdevice_id, i2c); + + tas_dev = devm_kzalloc(&i2c->dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) { + ret = -ENOMEM; + goto out; + } + tas_dev->dev = &i2c->dev; + tas_dev->client = (void *)i2c; + tas_dev->chip_id = id->driver_data; + + if (i2c->dev.of_node) + ret = tasdevice_parse_dt(tas_dev); + else { + dev_err(tas_dev->dev, "No DTS info\n"); + goto out; + } + + tas_dev->regmap = devm_regmap_init_i2c(i2c, + &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) { + ret = PTR_ERR(tas_dev->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + goto out; + } + ret = tasdevice_init(tas_dev); + +out: + if (ret < 0 && tas_dev != NULL) + tasdevice_remove(tas_dev); + return ret; + +} + +static void tasdevice_i2c_remove(struct i2c_client *client) +{ + struct tasdevice_priv *tas_dev = i2c_get_clientdata(client); + + if (tas_dev) + tasdevice_remove(tas_dev); + +} + +static struct i2c_driver tasdevice_i2c_driver = { + .driver = { + .name = "tas2781-codec", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tasdevice_of_match), + }, + .probe = tasdevice_i2c_probe, + .remove = tasdevice_i2c_remove, + .id_table = tasdevice_id, +}; + +module_i2c_driver(tasdevice_i2c_driver); + +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_AUTHOR("Kevin Lu <kevin-lu(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2781 Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2781.h b/sound/soc/codecs/tas2781.h new file mode 100644 index 000000000000..5056290fe963 --- /dev/null +++ b/sound/soc/codecs/tas2781.h @@ -0,0 +1,170 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable algo coff setting +// for one, two, even multiple TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#ifndef __TAS2781_H__ +#define __TAS2781_H__ + +#include "tas2781-dsp.h" + +#define SMARTAMP_MODULE_NAME "tas2781" +#define TASDEVICE_RETRY_COUNT 3 +#define TASDEVICE_ERROR_FAILED -2 + +#define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\ + SNDRV_PCM_RATE_88200) +#define TASDEVICE_MAX_CHANNELS 8 + +#define TASDEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/*PAGE Control Register (available in page0 of each book) */ +#define TASDEVICE_PAGE_SELECT 0x00 +#define TASDEVICE_BOOKCTL_PAGE 0x00 +#define TASDEVICE_BOOKCTL_REG 127 +#define TASDEVICE_BOOK_ID(reg) (reg / (256 * 128)) +#define TASDEVICE_PAGE_ID(reg) ((reg % (256 * 128)) / 128) +#define TASDEVICE_PAGE_REG(reg) ((reg % (256 * 128)) % 128) +#define TASDEVICE_PGRG(reg) ((reg % (256 * 128))) +#define TASDEVICE_REG(book, page, reg) (((book * 256 * 128) + \ + (page * 128)) + reg) + + /*Software Reset */ +#define TAS2871_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x02) +#define TAS2871_REG_SWRESET_RESET BIT(0) + + /* Enable Global addresses */ +#define TAS2871_MISC_CFG2 TASDEVICE_REG(0x0, 0X0, 0x07) +#define TAS2871_GLOBAL_ADDR_MASK BIT(1) +#define TAS2871_GLOBAL_ADDR_ENABLE BIT(1) + + /*I2C Checksum */ +#define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) + + /* Volume control */ +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) + +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + +enum audio_device { + TAS2781 = 0, +}; + +#define SMS_HTONS(a, b) ((((a)&0x00FF)<<8) | ((b)&0x00FF)) +#define SMS_HTONL(a, b, c, d) ((((a)&0x000000FF)<<24) | \ + (((b)&0x000000FF)<<16) | (((c)&0x000000FF)<<8) | \ + ((d)&0x000000FF)) + +struct tasdevice { + unsigned int dev_addr; + unsigned int err_code; + short cur_prog; + short cur_conf; + bool is_loading; + bool is_loaderr; + bool is_calibrated_data_loaded; + unsigned char cur_book; + struct tasdevice_fw *cali_data_fmw; +}; + +/* + * This item is used to store the generic i2c address of + * all the tas2781 devices for I2C broadcast during the multi-device + * writes, useless in mono case. + */ +struct global_addr { + unsigned char cur_book; + unsigned int dev_addr; + int ref_cnt; +}; + +struct tas_control { + struct snd_kcontrol_new *tasdevice_profile_controls; + int nr_controls; +}; + +struct tasdevice_irqinfo { + int irq_gpio; + int irq; +}; + +struct tasdevice_priv { + struct device *dev; + void *client; + struct regmap *regmap; + struct mutex codec_lock; + struct mutex dev_lock; + int rst_gpio; + struct tasdevice tasdevice[max_chn]; + struct tasdevice_fw *fmw; + struct tasdevice_rca rcabin; + struct tasdevice_irqinfo irq_info; + struct tas_control tas_ctrl; + struct global_addr glb_addr; + int cur_prog; + int cur_conf; + unsigned int chip_id; + void (*set_global_mode)(struct tasdevice_priv *tas_dev); + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_dev, + const struct firmware *fmw, int offset); + int (*fw_parse_program_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*tasdevice_load_block)(struct tasdevice_priv *tas_dev, + struct tasdev_blk *pBlock); + int (*fw_parse_calibration_data)(struct tasdevice_priv *tas_dev, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int fw_state; + unsigned int magic_num; + unsigned char ndev; + unsigned char dev_name[32]; + unsigned char rca_binaryname[64]; + unsigned char coef_binaryname[64]; + unsigned char cal_binaryname[max_chn][64]; + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + void *codec; + unsigned int sysclk; + bool is_glb_calibrated_data_loaded; +}; + +int tasdevice_dev_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int *value); +int tasdevice_process_block(void *context, + unsigned char *data, unsigned char dev_idx, int sublocksize); +int tasdevice_dev_write(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned int value); + +int tasdevice_dev_bulk_write( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned char *p_data, unsigned int n_length); + +int tasdevice_dev_bulk_read(struct tasdevice_priv *tasdevice, + enum channel chn, unsigned int reg, unsigned char *p_data, + unsigned int n_length); + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tasdevice, enum channel chn, + unsigned int reg, unsigned int mask, unsigned int value); + +#endif /*__TAS2781_H__ */ -- 2.34.1

1 0

[PATCH v4 00/15] spi: Add support for stacked/parallel memories
by Amit Kumar Mahapatra 11 Mar '23

11 Mar '23

This patch is in the continuation to the discussions which happened on 'commit f89504300e94 ("spi: Stacked/parallel memories bindings")' for adding dt-binding support for stacked/parallel memories. This patch series updated the spi-nor, spi core and the spi drivers to add stacked and parallel memories support. The first patch https://lore.kernel.org/all/20230119185342.2093323-1-amit.kumar-mahapatra@a… of the previous series got applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next But the rest of the patches in the series did not get applied due to merge conflict, so send the remaining patches in the series after rebasing it on top of for-next branch. --- BRANCH: for-next Changes in v4: - Fixed build error in spi-pl022.c file - reported by Mark. - Fixed build error in spi-sn-f-ospi.c file. - Added Reviewed-by: Serge Semin <fancer.lancer(a)gmail.com> tag. - Added two more patches to replace spi->chip_select with API calls in mpc832x_rdb.c & cs35l41_hda_spi.c files. Changes in v3: - Rebased the patches on top of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next - Added a patch to convert spi_nor_otp_region_len(nor) & spi_nor_otp_n_regions(nor) macros into inline functions - Added Reviewed-by & Acked-by tags Changes in v2: - Rebased the patches on top of v6.2-rc1 - Created separate patch to add get & set APIs for spi->chip_select & spi->cs_gpiod, and replaced all spi->chip_select and spi->cs_gpiod references with the API calls. - Created separate patch to add get & set APIs for nor->params. --- Amit Kumar Mahapatra (15): spi: Replace all spi->chip_select and spi->cs_gpiod references with function call net: Replace all spi->chip_select and spi->cs_gpiod references with function call iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call staging: Replace all spi->chip_select and spi->cs_gpiod references with function call platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call powerpc/83xx/mpc832x_rdb: Replace all spi->chip_select references with function call ALSA: hda: cs35l41: Replace all spi->chip_select references with function call spi: Add stacked and parallel memories support in SPI core mtd: spi-nor: Convert macros with inline functions mtd: spi-nor: Add APIs to set/get nor->params mtd: spi-nor: Add stacked memories support in spi-nor spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver mtd: spi-nor: Add parallel memories support in spi-nor spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver arch/powerpc/platforms/83xx/mpc832x_rdb.c | 2 +- drivers/iio/imu/adis16400.c | 2 +- drivers/mtd/devices/mtd_dataflash.c | 2 +- drivers/mtd/spi-nor/atmel.c | 17 +- drivers/mtd/spi-nor/core.c | 665 +++++++++++++++--- drivers/mtd/spi-nor/core.h | 8 + drivers/mtd/spi-nor/debugfs.c | 4 +- drivers/mtd/spi-nor/gigadevice.c | 4 +- drivers/mtd/spi-nor/issi.c | 11 +- drivers/mtd/spi-nor/macronix.c | 6 +- drivers/mtd/spi-nor/micron-st.c | 39 +- drivers/mtd/spi-nor/otp.c | 48 +- drivers/mtd/spi-nor/sfdp.c | 29 +- drivers/mtd/spi-nor/spansion.c | 50 +- drivers/mtd/spi-nor/sst.c | 7 +- drivers/mtd/spi-nor/swp.c | 22 +- drivers/mtd/spi-nor/winbond.c | 10 +- drivers/mtd/spi-nor/xilinx.c | 18 +- drivers/net/ethernet/adi/adin1110.c | 2 +- drivers/net/ethernet/asix/ax88796c_main.c | 2 +- drivers/net/ethernet/davicom/dm9051.c | 2 +- drivers/net/ethernet/qualcomm/qca_debug.c | 2 +- drivers/net/ieee802154/ca8210.c | 2 +- drivers/net/wan/slic_ds26522.c | 2 +- .../net/wireless/marvell/libertas/if_spi.c | 2 +- drivers/net/wireless/silabs/wfx/bus_spi.c | 2 +- drivers/net/wireless/st/cw1200/cw1200_spi.c | 2 +- .../platform/x86/serial-multi-instantiate.c | 3 +- drivers/spi/spi-altera-core.c | 2 +- drivers/spi/spi-amd.c | 4 +- drivers/spi/spi-ar934x.c | 2 +- drivers/spi/spi-armada-3700.c | 4 +- drivers/spi/spi-aspeed-smc.c | 13 +- drivers/spi/spi-at91-usart.c | 2 +- drivers/spi/spi-ath79.c | 4 +- drivers/spi/spi-atmel.c | 26 +- drivers/spi/spi-au1550.c | 4 +- drivers/spi/spi-axi-spi-engine.c | 2 +- drivers/spi/spi-bcm-qspi.c | 10 +- drivers/spi/spi-bcm2835.c | 19 +- drivers/spi/spi-bcm2835aux.c | 4 +- drivers/spi/spi-bcm63xx-hsspi.c | 22 +- drivers/spi/spi-bcm63xx.c | 2 +- drivers/spi/spi-cadence-quadspi.c | 5 +- drivers/spi/spi-cadence-xspi.c | 4 +- drivers/spi/spi-cadence.c | 4 +- drivers/spi/spi-cavium.c | 8 +- drivers/spi/spi-coldfire-qspi.c | 8 +- drivers/spi/spi-davinci.c | 18 +- drivers/spi/spi-dln2.c | 6 +- drivers/spi/spi-dw-core.c | 2 +- drivers/spi/spi-dw-mmio.c | 4 +- drivers/spi/spi-falcon.c | 2 +- drivers/spi/spi-fsi.c | 2 +- drivers/spi/spi-fsl-dspi.c | 16 +- drivers/spi/spi-fsl-espi.c | 6 +- drivers/spi/spi-fsl-lpspi.c | 2 +- drivers/spi/spi-fsl-qspi.c | 6 +- drivers/spi/spi-fsl-spi.c | 2 +- drivers/spi/spi-geni-qcom.c | 6 +- drivers/spi/spi-gpio.c | 4 +- drivers/spi/spi-gxp.c | 4 +- drivers/spi/spi-hisi-sfc-v3xx.c | 2 +- drivers/spi/spi-img-spfi.c | 14 +- drivers/spi/spi-imx.c | 30 +- drivers/spi/spi-ingenic.c | 4 +- drivers/spi/spi-intel.c | 2 +- drivers/spi/spi-jcore.c | 4 +- drivers/spi/spi-lantiq-ssc.c | 6 +- drivers/spi/spi-mem.c | 4 +- drivers/spi/spi-meson-spicc.c | 2 +- drivers/spi/spi-microchip-core.c | 6 +- drivers/spi/spi-mpc512x-psc.c | 8 +- drivers/spi/spi-mpc52xx.c | 2 +- drivers/spi/spi-mt65xx.c | 6 +- drivers/spi/spi-mt7621.c | 2 +- drivers/spi/spi-mux.c | 8 +- drivers/spi/spi-mxic.c | 10 +- drivers/spi/spi-mxs.c | 2 +- drivers/spi/spi-npcm-fiu.c | 20 +- drivers/spi/spi-nxp-fspi.c | 10 +- drivers/spi/spi-omap-100k.c | 2 +- drivers/spi/spi-omap-uwire.c | 8 +- drivers/spi/spi-omap2-mcspi.c | 24 +- drivers/spi/spi-orion.c | 4 +- drivers/spi/spi-pci1xxxx.c | 4 +- drivers/spi/spi-pic32-sqi.c | 2 +- drivers/spi/spi-pic32.c | 4 +- drivers/spi/spi-pl022.c | 4 +- drivers/spi/spi-pxa2xx.c | 6 +- drivers/spi/spi-qcom-qspi.c | 2 +- drivers/spi/spi-rb4xx.c | 2 +- drivers/spi/spi-rockchip-sfc.c | 2 +- drivers/spi/spi-rockchip.c | 26 +- drivers/spi/spi-rspi.c | 10 +- drivers/spi/spi-s3c64xx.c | 2 +- drivers/spi/spi-sc18is602.c | 4 +- drivers/spi/spi-sh-msiof.c | 6 +- drivers/spi/spi-sh-sci.c | 2 +- drivers/spi/spi-sifive.c | 6 +- drivers/spi/spi-sn-f-ospi.c | 2 +- drivers/spi/spi-st-ssc4.c | 2 +- drivers/spi/spi-stm32-qspi.c | 12 +- drivers/spi/spi-sun4i.c | 2 +- drivers/spi/spi-sun6i.c | 2 +- drivers/spi/spi-synquacer.c | 6 +- drivers/spi/spi-tegra114.c | 28 +- drivers/spi/spi-tegra20-sflash.c | 2 +- drivers/spi/spi-tegra20-slink.c | 6 +- drivers/spi/spi-tegra210-quad.c | 8 +- drivers/spi/spi-ti-qspi.c | 16 +- drivers/spi/spi-topcliff-pch.c | 4 +- drivers/spi/spi-wpcm-fiu.c | 12 +- drivers/spi/spi-xcomm.c | 2 +- drivers/spi/spi-xilinx.c | 6 +- drivers/spi/spi-xlp.c | 4 +- drivers/spi/spi-zynq-qspi.c | 2 +- drivers/spi/spi-zynqmp-gqspi.c | 58 +- drivers/spi/spi.c | 213 ++++-- drivers/spi/spidev.c | 6 +- drivers/staging/fbtft/fbtft-core.c | 2 +- drivers/staging/greybus/spilib.c | 2 +- include/linux/mtd/spi-nor.h | 18 +- include/linux/spi/spi.h | 34 +- include/trace/events/spi.h | 10 +- sound/pci/hda/cs35l41_hda_spi.c | 2 +- 126 files changed, 1323 insertions(+), 594 deletions(-) -- 2.25.1

3 18

[PATCH] ASoC: Use of_property_read_bool() for boolean properties
by Rob Herring 11 Mar '23

11 Mar '23

It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh(a)kernel.org> --- sound/soc/codecs/sta32x.c | 39 +++++++++++------------ sound/soc/codecs/sta350.c | 63 +++++++++++++++++--------------------- sound/soc/codecs/tas5086.c | 2 +- sound/soc/fsl/fsl_sai.c | 12 ++++---- sound/soc/fsl/fsl_ssi.c | 2 +- sound/soc/fsl/imx-card.c | 2 +- sound/soc/sh/rcar/ssi.c | 4 +-- 7 files changed, 57 insertions(+), 67 deletions(-) diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index 8c86b578eba8..29af9595dac1 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -1054,35 +1054,32 @@ static int sta32x_probe_dt(struct device *dev, struct sta32x_priv *sta32x) of_property_read_u8(np, "st,ch3-output-mapping", &pdata->ch3_output_mapping); - if (of_get_property(np, "st,fault-detect-recovery", NULL)) - pdata->fault_detect_recovery = 1; - if (of_get_property(np, "st,thermal-warning-recovery", NULL)) - pdata->thermal_warning_recovery = 1; - if (of_get_property(np, "st,thermal-warning-adjustment", NULL)) - pdata->thermal_warning_adjustment = 1; - if (of_get_property(np, "st,needs_esd_watchdog", NULL)) - pdata->needs_esd_watchdog = 1; + pdata->fault_detect_recovery = + of_property_read_bool(np, "st,fault-detect-recovery"); + pdata->thermal_warning_recovery = + of_property_read_bool(np, "st,thermal-warning-recovery"); + pdata->thermal_warning_adjustment = + of_property_read_bool(np, "st,thermal-warning-adjustment"); + pdata->needs_esd_watchdog = + of_property_read_bool(np, "st,needs_esd_watchdog"); tmp = 140; of_property_read_u16(np, "st,drop-compensation-ns", &tmp); pdata->drop_compensation_ns = clamp_t(u16, tmp, 0, 300) / 20; /* CONFE */ - if (of_get_property(np, "st,max-power-use-mpcc", NULL)) - pdata->max_power_use_mpcc = 1; - - if (of_get_property(np, "st,max-power-correction", NULL)) - pdata->max_power_correction = 1; - - if (of_get_property(np, "st,am-reduction-mode", NULL)) - pdata->am_reduction_mode = 1; - - if (of_get_property(np, "st,odd-pwm-speed-mode", NULL)) - pdata->odd_pwm_speed_mode = 1; + pdata->max_power_use_mpcc = + of_property_read_bool(np, "st,max-power-use-mpcc"); + pdata->max_power_correction = + of_property_read_bool(np, "st,max-power-correction"); + pdata->am_reduction_mode = + of_property_read_bool(np, "st,am-reduction-mode"); + pdata->odd_pwm_speed_mode = + of_property_read_bool(np, "st,odd-pwm-speed-mode"); /* CONFF */ - if (of_get_property(np, "st,invalid-input-detect-mute", NULL)) - pdata->invalid_input_detect_mute = 1; + pdata->invalid_input_detect_mute = + of_property_read_bool(np, "st,invalid-input-detect-mute"); sta32x->pdata = pdata; diff --git a/sound/soc/codecs/sta350.c b/sound/soc/codecs/sta350.c index 9ed13aeb3cbd..b033a5fcd6c0 100644 --- a/sound/soc/codecs/sta350.c +++ b/sound/soc/codecs/sta350.c @@ -1106,12 +1106,12 @@ static int sta350_probe_dt(struct device *dev, struct sta350_priv *sta350) of_property_read_u8(np, "st,ch3-output-mapping", &pdata->ch3_output_mapping); - if (of_get_property(np, "st,thermal-warning-recovery", NULL)) - pdata->thermal_warning_recovery = 1; - if (of_get_property(np, "st,thermal-warning-adjustment", NULL)) - pdata->thermal_warning_adjustment = 1; - if (of_get_property(np, "st,fault-detect-recovery", NULL)) - pdata->fault_detect_recovery = 1; + pdata->thermal_warning_recovery = + of_property_read_bool(np, "st,thermal-warning-recovery"); + pdata->thermal_warning_adjustment = + of_property_read_bool(np, "st,thermal-warning-adjustment"); + pdata->fault_detect_recovery = + of_property_read_bool(np, "st,fault-detect-recovery"); pdata->ffx_power_output_mode = STA350_FFX_PM_VARIABLE_DROP_COMP; if (!of_property_read_string(np, "st,ffx-power-output-mode", @@ -1133,41 +1133,34 @@ static int sta350_probe_dt(struct device *dev, struct sta350_priv *sta350) of_property_read_u16(np, "st,drop-compensation-ns", &tmp); pdata->drop_compensation_ns = clamp_t(u16, tmp, 0, 300) / 20; - if (of_get_property(np, "st,overcurrent-warning-adjustment", NULL)) - pdata->oc_warning_adjustment = 1; + pdata->oc_warning_adjustment = + of_property_read_bool(np, "st,overcurrent-warning-adjustment"); /* CONFE */ - if (of_get_property(np, "st,max-power-use-mpcc", NULL)) - pdata->max_power_use_mpcc = 1; - - if (of_get_property(np, "st,max-power-correction", NULL)) - pdata->max_power_correction = 1; - - if (of_get_property(np, "st,am-reduction-mode", NULL)) - pdata->am_reduction_mode = 1; - - if (of_get_property(np, "st,odd-pwm-speed-mode", NULL)) - pdata->odd_pwm_speed_mode = 1; - - if (of_get_property(np, "st,distortion-compensation", NULL)) - pdata->distortion_compensation = 1; + pdata->max_power_use_mpcc = + of_property_read_bool(np, "st,max-power-use-mpcc"); + pdata->max_power_correction = + of_property_read_bool(np, "st,max-power-correction"); + pdata->am_reduction_mode = + of_property_read_bool(np, "st,am-reduction-mode"); + pdata->odd_pwm_speed_mode = + of_property_read_bool(np, "st,odd-pwm-speed-mode"); + pdata->distortion_compensation = + of_property_read_bool(np, "st,distortion-compensation"); /* CONFF */ - if (of_get_property(np, "st,invalid-input-detect-mute", NULL)) - pdata->invalid_input_detect_mute = 1; + pdata->invalid_input_detect_mute = + of_property_read_bool(np, "st,invalid-input-detect-mute"); /* MISC */ - if (of_get_property(np, "st,activate-mute-output", NULL)) - pdata->activate_mute_output = 1; - - if (of_get_property(np, "st,bridge-immediate-off", NULL)) - pdata->bridge_immediate_off = 1; - - if (of_get_property(np, "st,noise-shape-dc-cut", NULL)) - pdata->noise_shape_dc_cut = 1; - - if (of_get_property(np, "st,powerdown-master-volume", NULL)) - pdata->powerdown_master_vol = 1; + pdata->activate_mute_output = + of_property_read_bool(np, "st,activate-mute-output"); + pdata->bridge_immediate_off = + of_property_read_bool(np, "st,bridge-immediate-off"); + pdata->noise_shape_dc_cut = + of_property_read_bool(np, "st,noise-shape-dc-cut"); + pdata->powerdown_master_vol = + of_property_read_bool(np, "st,powerdown-master-volume"); if (!of_property_read_u8(np, "st,powerdown-delay-divider", &tmp8)) { if (is_power_of_2(tmp8) && tmp8 >= 1 && tmp8 <= 128) diff --git a/sound/soc/codecs/tas5086.c b/sound/soc/codecs/tas5086.c index 22143cc5afa7..f9e7122894bd 100644 --- a/sound/soc/codecs/tas5086.c +++ b/sound/soc/codecs/tas5086.c @@ -840,7 +840,7 @@ static int tas5086_probe(struct snd_soc_component *component) snprintf(name, sizeof(name), "ti,mid-z-channel-%d", i + 1); - if (of_get_property(of_node, name, NULL) != NULL) + if (of_property_read_bool(of_node, name)) priv->pwm_start_mid_z |= 1 << i; } } diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 1b197478b3d9..4e6b75f1ddd0 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -1380,18 +1380,18 @@ static int fsl_sai_probe(struct platform_device *pdev) sai->cpu_dai_drv.symmetric_channels = 1; sai->cpu_dai_drv.symmetric_sample_bits = 1; - if (of_find_property(np, "fsl,sai-synchronous-rx", NULL) && - of_find_property(np, "fsl,sai-asynchronous", NULL)) { + if (of_property_read_bool(np, "fsl,sai-synchronous-rx") && + of_property_read_bool(np, "fsl,sai-asynchronous")) { /* error out if both synchronous and asynchronous are present */ dev_err(dev, "invalid binding for synchronous mode\n"); return -EINVAL; } - if (of_find_property(np, "fsl,sai-synchronous-rx", NULL)) { + if (of_property_read_bool(np, "fsl,sai-synchronous-rx")) { /* Sync Rx with Tx */ sai->synchronous[RX] = false; sai->synchronous[TX] = true; - } else if (of_find_property(np, "fsl,sai-asynchronous", NULL)) { + } else if (of_property_read_bool(np, "fsl,sai-asynchronous")) { /* Discard all settings for asynchronous mode */ sai->synchronous[RX] = false; sai->synchronous[TX] = false; @@ -1400,7 +1400,7 @@ static int fsl_sai_probe(struct platform_device *pdev) sai->cpu_dai_drv.symmetric_sample_bits = 0; } - if (of_find_property(np, "fsl,sai-mclk-direction-output", NULL) && + if (of_property_read_bool(np, "fsl,sai-mclk-direction-output") && of_device_is_compatible(np, "fsl,imx6ul-sai")) { gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr"); if (IS_ERR(gpr)) { @@ -1443,7 +1443,7 @@ static int fsl_sai_probe(struct platform_device *pdev) dev_warn(dev, "Error reading SAI version: %d\n", ret); /* Select MCLK direction */ - if (of_find_property(np, "fsl,sai-mclk-direction-output", NULL) && + if (of_property_read_bool(np, "fsl,sai-mclk-direction-output") && sai->soc_data->max_register >= FSL_SAI_MCTL) { regmap_update_bits(sai->regmap, FSL_SAI_MCTL, FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN); diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 46a53551b955..6af00b62a60f 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -1447,7 +1447,7 @@ static int fsl_ssi_probe_from_dt(struct fsl_ssi *ssi) return -EINVAL; } strcpy(ssi->card_name, "ac97-codec"); - } else if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) { + } else if (!of_property_read_bool(np, "fsl,ssi-asynchronous")) { /* * In synchronous mode, STCK and STFS ports are used by RX * as well. So the software should limit the sample rates, diff --git a/sound/soc/fsl/imx-card.c b/sound/soc/fsl/imx-card.c index 3f128ced4180..64a4d7e9db60 100644 --- a/sound/soc/fsl/imx-card.c +++ b/sound/soc/fsl/imx-card.c @@ -563,7 +563,7 @@ static int imx_card_parse_of(struct imx_card_data *data) link_data->cpu_sysclk_id = FSL_SAI_CLK_MAST1; /* sai may support mclk/bclk = 1 */ - if (of_find_property(np, "fsl,mclk-equal-bclk", NULL)) { + if (of_property_read_bool(np, "fsl,mclk-equal-bclk")) { link_data->one2one_ratio = true; } else { int i; diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 8ddee5b03ece..690ac0d6ef41 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -1211,10 +1211,10 @@ int rsnd_ssi_probe(struct rsnd_priv *priv) goto rsnd_ssi_probe_done; } - if (of_get_property(np, "shared-pin", NULL)) + if (of_property_read_bool(np, "shared-pin")) rsnd_flags_set(ssi, RSND_SSI_CLK_PIN_SHARE); - if (of_get_property(np, "no-busif", NULL)) + if (of_property_read_bool(np, "no-busif")) rsnd_flags_set(ssi, RSND_SSI_NO_BUSIF); ssi->irq = irq_of_parse_and_map(np, 0); -- 2.39.2

2 1

[PATCH] ASoC: Use of_property_present() for testing DT property presence
by Rob Herring 11 Mar '23

11 Mar '23

It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh(a)kernel.org> --- sound/soc/codecs/lpass-macro-common.c | 2 +- sound/soc/generic/audio-graph-card.c | 2 +- sound/soc/generic/audio-graph-card2.c | 2 +- sound/soc/mxs/mxs-sgtl5000.c | 2 +- sound/soc/samsung/i2s.c | 2 +- sound/soc/sh/fsi.c | 2 +- sound/soc/stm/stm32_i2s.c | 2 +- sound/soc/stm/stm32_sai_sub.c | 4 ++-- sound/soc/tegra/tegra_asoc_machine.c | 2 +- 9 files changed, 10 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/lpass-macro-common.c b/sound/soc/codecs/lpass-macro-common.c index 1b9082d237c1..f54baaad54d4 100644 --- a/sound/soc/codecs/lpass-macro-common.c +++ b/sound/soc/codecs/lpass-macro-common.c @@ -16,7 +16,7 @@ struct lpass_macro *lpass_macro_pds_init(struct device *dev) struct lpass_macro *l_pds; int ret; - if (!of_find_property(dev->of_node, "power-domains", NULL)) + if (!of_property_present(dev->of_node, "power-domains")) return NULL; l_pds = devm_kzalloc(dev, sizeof(*l_pds), GFP_KERNEL); diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index 5daa824a4ffc..d788f5f23a8a 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -78,7 +78,7 @@ static int graph_get_dai_id(struct device_node *ep) * only of_graph_parse_endpoint(). * We need to check "reg" property */ - if (of_get_property(ep, "reg", NULL)) + if (of_property_present(ep, "reg")) return info.id; node = of_get_parent(ep); diff --git a/sound/soc/generic/audio-graph-card2.c b/sound/soc/generic/audio-graph-card2.c index 06609a526b78..259544f64df9 100644 --- a/sound/soc/generic/audio-graph-card2.c +++ b/sound/soc/generic/audio-graph-card2.c @@ -376,7 +376,7 @@ static int graph_get_dai_id(struct device_node *ep) * only of_graph_parse_endpoint(). * We need to check "reg" property */ - if (of_get_property(ep, "reg", NULL)) + if (of_property_present(ep, "reg")) return info.id; node = of_get_parent(ep); diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c index 746f40938675..a55e7256a4c3 100644 --- a/sound/soc/mxs/mxs-sgtl5000.c +++ b/sound/soc/mxs/mxs-sgtl5000.c @@ -150,7 +150,7 @@ static int mxs_sgtl5000_probe(struct platform_device *pdev) card->dev = &pdev->dev; - if (of_find_property(np, "audio-routing", NULL)) { + if (of_property_present(np, "audio-routing")) { card->dapm_widgets = mxs_sgtl5000_dapm_widgets; card->num_dapm_widgets = ARRAY_SIZE(mxs_sgtl5000_dapm_widgets); diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 6f96032090de..083e278aa021 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1289,7 +1289,7 @@ static int i2s_register_clock_provider(struct samsung_i2s_priv *priv) int ret, i; /* Register the clock provider only if it's expected in the DTB */ - if (!of_find_property(dev->of_node, "#clock-cells", NULL)) + if (!of_property_present(dev->of_node, "#clock-cells")) return 0; /* Get the RCLKSRC mux clock parent clock names */ diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index f3edc2e3d9d7..9f3f1af6349f 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -1855,7 +1855,7 @@ static void fsi_of_parse(char *name, for (i = 0; i < ARRAY_SIZE(of_parse_property); i++) { sprintf(prop, "%s,%s", name, of_parse_property[i].name); - if (of_get_property(np, prop, NULL)) + if (of_property_present(np, prop)) flags |= of_parse_property[i].val; } info->flags = flags; diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c index f3dd9f8e621c..9dad85ecb93f 100644 --- a/sound/soc/stm/stm32_i2s.c +++ b/sound/soc/stm/stm32_i2s.c @@ -1066,7 +1066,7 @@ static int stm32_i2s_parse_dt(struct platform_device *pdev, "Could not get x11k parent clock\n"); /* Register mclk provider if requested */ - if (of_find_property(np, "#clock-cells", NULL)) { + if (of_property_present(np, "#clock-cells")) { ret = stm32_i2s_add_mclk_provider(i2s); if (ret < 0) return ret; diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c index eb31b49e6597..8ba4206f751d 100644 --- a/sound/soc/stm/stm32_sai_sub.c +++ b/sound/soc/stm/stm32_sai_sub.c @@ -1394,7 +1394,7 @@ static int stm32_sai_sub_parse_of(struct platform_device *pdev, /* Get spdif iec60958 property */ sai->spdif = false; - if (of_get_property(np, "st,iec60958", NULL)) { + if (of_property_present(np, "st,iec60958")) { if (!STM_SAI_HAS_SPDIF(sai) || sai->dir == SNDRV_PCM_STREAM_CAPTURE) { dev_err(&pdev->dev, "S/PDIF IEC60958 not supported\n"); @@ -1480,7 +1480,7 @@ static int stm32_sai_sub_parse_of(struct platform_device *pdev, return 0; /* Register mclk provider if requested */ - if (of_find_property(np, "#clock-cells", NULL)) { + if (of_property_present(np, "#clock-cells")) { ret = stm32_sai_add_mclk_provider(sai); if (ret < 0) return ret; diff --git a/sound/soc/tegra/tegra_asoc_machine.c b/sound/soc/tegra/tegra_asoc_machine.c index 78faa8bcae27..2dc1f44c5a8b 100644 --- a/sound/soc/tegra/tegra_asoc_machine.c +++ b/sound/soc/tegra/tegra_asoc_machine.c @@ -502,7 +502,7 @@ int tegra_asoc_machine_probe(struct platform_device *pdev) * If clock parents are not set in DT, configure here to use clk_out_1 * as mclk and extern1 as parent for Tegra30 and higher. */ - if (!of_find_property(dev->of_node, "assigned-clock-parents", NULL) && + if (!of_property_present(dev->of_node, "assigned-clock-parents") && !of_machine_is_compatible("nvidia,tegra20")) { struct clk *clk_out_1, *clk_extern1; -- 2.39.2

3 4

[PATCH] Revert "ASoC: SOF: Intel: MTL: Enable DMI L1"
by Peter Ujfalusi 11 Mar '23

11 Mar '23

This reverts commit 2b5a30cafb2eff4e6a34bc80b1d16ed6ca5c2c71. It came to our attention that the access to the EM2 register is restricted to the DSP side on MTL compared to prior platforms. Writing to it from the host side has no effect (negative or positive), it is better to remove the code to not cause confusion and wrong impression. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/sof/intel/mtl.c | 3 --- sound/soc/sof/intel/mtl.h | 2 -- 2 files changed, 5 deletions(-) diff --git a/sound/soc/sof/intel/mtl.c b/sound/soc/sof/intel/mtl.c index 216fd07a3a93..307faad2ecf4 100644 --- a/sound/soc/sof/intel/mtl.c +++ b/sound/soc/sof/intel/mtl.c @@ -280,9 +280,6 @@ static int mtl_dsp_post_fw_run(struct snd_sof_dev *sdev) } hda_sdw_int_enable(sdev, true); - - /* enable DMI L1 */ - snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, MTL_EM2, MTL_EM2_L1SEN, MTL_EM2_L1SEN); return 0; } diff --git a/sound/soc/sof/intel/mtl.h b/sound/soc/sof/intel/mtl.h index ddc05304a9d5..26418fb08807 100644 --- a/sound/soc/sof/intel/mtl.h +++ b/sound/soc/sof/intel/mtl.h @@ -28,8 +28,6 @@ #define MTL_HFINTIPPTR_PTR_MASK GENMASK(20, 0) #define MTL_HDA_VS_D0I3C 0x1D4A -#define MTL_EM2 0x1c44 -#define MTL_EM2_L1SEN BIT(13) #define MTL_DSP2CXCAP_PRIMARY_CORE 0x178D00 #define MTL_DSP2CXCTL_PRIMARY_CORE 0x178D04 -- 2.39.2

2 2

[PATCH 0/9] ASoC: add audio digital codecs for Qualcomm SM8550
by Krzysztof Kozlowski 11 Mar '23

11 Mar '23

Hi, Dependencies ============ For va-macro bindings: https://lore.kernel.org/r/20221118071849.25506-2-srinivas.kandagatla@linaro… NOT a dependency ================ The patchset can be applied independently of my previous fix: https://lore.kernel.org/linux-arm-msm/20230310100937.32485-1-krzysztof.kozl… Logically, better if they were together, but code will work fine other way. Best regards, Krzysztof Krzysztof Kozlowski (9): ASoC: dt-bindings: qcom,lpass-rx-macro: narrow clocks per variants ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8550 RX macro ASoC: codecs: lpass-rx-macro: add support for SM8550 ASoC: dt-bindings: qcom,lpass-tx-macro: narrow clocks per variants ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8550 TX macro ASoC: codecs: lpass-tx-macro: add support for SM8550 ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8550 VA macro ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8550 WSA macro ASoC: codecs: lpass-wsa-macro: add support for SM8550 .../bindings/sound/qcom,lpass-rx-macro.yaml | 76 +++++++++++++---- .../bindings/sound/qcom,lpass-tx-macro.yaml | 81 +++++++++++++++---- .../bindings/sound/qcom,lpass-va-macro.yaml | 18 +++++ .../bindings/sound/qcom,lpass-wsa-macro.yaml | 23 +++++- sound/soc/codecs/lpass-rx-macro.c | 39 +++++++-- sound/soc/codecs/lpass-tx-macro.c | 38 +++++++-- sound/soc/codecs/lpass-wsa-macro.c | 38 +++++++-- 7 files changed, 256 insertions(+), 57 deletions(-) -- 2.34.1

2 14

USB-Audio: ALC4080 - Add MSI MAG B650M MORTAR WIFI
by GitHub pull_request - opened 11 Mar '23

11 Mar '23

alsa-project/alsa-ucm-conf pull request #289 was opened from cloudy-dev: USB ID: 0db0:7696 Adds support for the MSI MAG B650M MORTAR WIFI motherboard front & back 3.5mm jacks. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/289 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/289.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

amidi or aplaymidi filtering
by GitHub issues - opened 10 Mar '23

10 Mar '23

alsa-project/alsa-utils issue #194 was opened from wraybowling: I would like to see filtering in either aplaymidi so things like sysex messages can be ignored. Or, as a compromise, if it's more appropriate to add to amidi, then a user would pipe the midi output from aplaymidi to amidi with that filtering. I would find the latter solution to be more clunky though. Issue URL : https://github.com/alsa-project/alsa-utils/issues/194 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH v3 0/4] ASoC: microchip: power saving features and cleanups
by Claudiu Beznea 10 Mar '23

10 Mar '23

Hi, The following series adds runtime PM and suspend to RAM features for mchp-pdmc driver. Along with it 2 cleanup patches were added: - patch 1/4: use vendor,device.yaml file format for Microchip AT91 ASoC bindings - patch 4/4: use FIELD_PREP() in mchp-spdiftx.c Thank you, Claudiu Beznea Changes in v3: - in patch 1/4 add back microchip,sama7g5-i2smcc.yaml as it was removed by mistake in v2 - in patch 1/4 fixed the schema id to match the new naming Changes in v2: - s/microchip,sama7g5-i2s-mcc/microchip,sama7g5-i2smcc as this is the 1st available compatible Claudiu Beznea (4): ASoC: dt-bindings: microchip: use proper naming syntax ASoC: mchp-pdmc: use runtime pm for clock power saving ASoC: mchp-pdmc: add support for suspend to RAM ASoC: mchp-spdiftx: use FIELD_PREP() where possible ...mcc.yaml => microchip,sama7g5-i2smcc.yaml} | 2 +- ...,pdmc.yaml => microchip,sama7g5-pdmc.yaml} | 2 +- ...rx.yaml => microchip,sama7g5-spdifrx.yaml} | 2 +- ...tx.yaml => microchip,sama7g5-spdiftx.yaml} | 2 +- sound/soc/atmel/mchp-pdmc.c | 145 ++++++++++++------ sound/soc/atmel/mchp-spdiftx.c | 8 +- 6 files changed, 105 insertions(+), 56 deletions(-) rename Documentation/devicetree/bindings/sound/{mchp,i2s-mcc.yaml => microchip,sama7g5-i2smcc.yaml} (97%) rename Documentation/devicetree/bindings/sound/{microchip,pdmc.yaml => microchip,sama7g5-pdmc.yaml} (97%) rename Documentation/devicetree/bindings/sound/{mchp,spdifrx.yaml => microchip,sama7g5-spdifrx.yaml} (95%) rename Documentation/devicetree/bindings/sound/{mchp,spdiftx.yaml => microchip,sama7g5-spdiftx.yaml} (95%) -- 2.34.1

3 7

[PATCH] ASoC: SOF: Intel: hda-loader: use SOF helper for consistency
by Peter Ujfalusi 10 Mar '23

10 Mar '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Update code to remove mix between legacy and SOF definitions. No functionality change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/sof/intel/hda-loader.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c index d680562edb35..de8d9ad89bc7 100644 --- a/sound/soc/sof/intel/hda-loader.c +++ b/sound/soc/sof/intel/hda-loader.c @@ -321,13 +321,13 @@ int hda_cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *hext_stream int hda_dsp_cl_boot_firmware_iccmax(struct snd_sof_dev *sdev) { struct hdac_ext_stream *iccmax_stream; - struct hdac_bus *bus = sof_to_bus(sdev); struct snd_dma_buffer dmab_bdl; int ret, ret1; u8 original_gb; /* save the original LTRP guardband value */ - original_gb = snd_hdac_chip_readb(bus, VS_LTRP) & HDA_VS_INTEL_LTRP_GB_MASK; + original_gb = snd_sof_dsp_read8(sdev, HDA_DSP_HDA_BAR, HDA_VS_INTEL_LTRP) & + HDA_VS_INTEL_LTRP_GB_MASK; /* * Prepare capture stream for ICCMAX. We do not need to store @@ -356,7 +356,8 @@ int hda_dsp_cl_boot_firmware_iccmax(struct snd_sof_dev *sdev) } /* restore the original guardband value after FW boot */ - snd_hdac_chip_updateb(bus, VS_LTRP, HDA_VS_INTEL_LTRP_GB_MASK, original_gb); + snd_sof_dsp_update8(sdev, HDA_DSP_HDA_BAR, HDA_VS_INTEL_LTRP, + HDA_VS_INTEL_LTRP_GB_MASK, original_gb); return ret; } -- 2.39.0

2 1