- Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 3/3] ASoC: add saarb machine driver for 88pm860x
by Haojian Zhuang 18 Aug '10

18 Aug '10

1 0

[alsa-devel] [PATCH 2/3] ASoC: add tavorevb3 machine driver for 88pm860x
by Haojian Zhuang 18 Aug '10

18 Aug '10

1 0

[alsa-devel] [PATCH 1/3] ASoC: add 88pm860x codec driver
by Haojian Zhuang 18 Aug '10

18 Aug '10

1 0

[alsa-devel] [PATCH 0/3] ASoC: 88pm860x codec driver
by Haojian Zhuang 18 Aug '10

18 Aug '10

changelog: 1. remove unncessary files, such as pxa2xx-ssp.c/ssp.c 2. add jack back 3. EQ is removed. It's be added later. 4. Update code followed by comments. Thanks Haojian

1 0

[alsa-devel] [PATCH 2/3] ASoC: add tavorevb3 machine driver for 88pm860x
by Haojian Zhuang 18 Aug '10

18 Aug '10

2 2

[alsa-devel] [PATCH 0/3] ASoC: support 88pm860x codec
by Haojian Zhuang 18 Aug '10

18 Aug '10

Chagelog: 1. Jack is added back. 2. Update followed by comments. 3. EQ is still removed. It'll be added in later patches. Thanks Haojian

2 1

[alsa-devel] [PATCH 3/3] ASoC: add saarb machine driver for 88pm860x
by Haojian Zhuang 18 Aug '10

18 Aug '10

1 0

[alsa-devel] Routing irq throw a gpio using the wm9713
by Michael Trimarchi 18 Aug '10

18 Aug '10

Hi all, I'm trying to rise an irq using irq2 of the wm9713 so I have configured the codec like this: #define GPIO2 (1 << 2) #define GPIO6 (1 << 6) /* Enable Interrupt Output enable on GPIO02 */ reg = codec->read(codec, AC97_MISC_AFE); codec->write(codec, AC97_MISC_AFE, reg & ~GPIO02); reg = codec->read(codec, AC97_GPIO_CFG); codec->write(codec, AC97_GPIO_CFG, reg & ~GPIO02); reg = codec->read(codec, AC97_GPIO_STICKY); codec->write(codec, AC97_GPIO_STICKY, reg | GPIO06); reg = codec->read(codec, AC97_GPIO_WAKEUP); codec->write(codec, AC97_GPIO_WAKEUP, reg | GPIO06); Then create a soc-jack on a gpio that is wired with the gpio6 of the codec. I don't received any interrupt Michael Trimarchi

1 1

[alsa-devel] [PATCH 00/14] ASoC: multi-component platform support
by Liam Girdwood 18 Aug '10

18 Aug '10

This is the third and final part part of the multi-component series and focuses on ASoC multi-component SoC platform support. I've split this series up per platform. All the patches will be rebased together at merge time so we don't break bisect. Most platform drivers were extremely straight forward with changes mainly limited to their probe() and remove() sections. Although some platforms (like ppc, samsung and i.MX) did require a little extra work and this is marked in their commit messages (this has been fixed by Samsung and Timur, Sascha is currently looking at the i.MX changes). Again, it's not a one man effort. I've had help from the folks mentioned in the cover email for the core. Liam Girdwood (14): ASoC: multi-component - TI OMAP Platform ASoC: multi-component - Atmel Platform ASoC: multi-component - TI DaVinci Platform ASoC: multi-component - Freescale i.MX Platform ASoC: multi-component - Toshiba Txx9 Platform ASoC: multi-component - Renasas SuperH Platform ASoC: multi-component - S6000 Platform ASoC: multi-component - Freescale PPC Platform ASoC: multi-component - RMI Alchemy AU1x Platform ASoC: multi-component - Analog Devices Blackfin Platform ASoC: multi-component - Cirrus Logic ep93xx Platform ASoC: multi-component - Marvell Kirkwood Platform ASoC: multi-component - Winbond/Nuvoton NUC900 Platform ASoC: multi-component - Ingenic J4740 Platform arch/arm/mach-davinci/da830.c | 6 +- arch/arm/mach-davinci/da850.c | 2 +- arch/arm/mach-davinci/devices-da8xx.c | 4 +- arch/arm/mach-davinci/devices.c | 13 + arch/arm/mach-davinci/dm355.c | 6 +- arch/arm/mach-davinci/dm365.c | 4 +- arch/arm/mach-davinci/dm644x.c | 4 +- arch/arm/mach-davinci/dm646x.c | 8 +- arch/arm/mach-ep93xx/clock.c | 6 +- arch/arm/mach-ep93xx/core.c | 8 +- arch/arm/mach-kirkwood/common.c | 6 + arch/arm/mach-omap1/devices.c | 26 + arch/arm/mach-omap2/board-n8x0.c | 15 + arch/arm/mach-omap2/board-rx51-peripherals.c | 14 +- arch/arm/mach-omap2/board-zoom2.c | 28 +- arch/arm/mach-omap2/devices.c | 39 ++ arch/arm/mach-omap2/include/mach/board-zoom.h | 2 + arch/arm/plat-omap/include/plat/mcbsp.h | 7 + drivers/input/misc/twl4030-vibra.c | 4 +- drivers/mfd/twl-core.c | 6 +- drivers/mfd/twl4030-codec.c | 8 +- include/linux/i2c/twl.h | 6 +- include/sound/sh_fsi.h | 4 +- include/sound/soc-of-simple.h | 25 - sound/soc/atmel/atmel-pcm.c | 59 ++- sound/soc/atmel/atmel-pcm.h | 3 - sound/soc/atmel/atmel_ssc_dai.c | 97 +++- sound/soc/atmel/atmel_ssc_dai.h | 1 - sound/soc/atmel/playpaq_wm8510.c | 65 +-- sound/soc/atmel/sam9g20_wm8731.c | 51 +-- sound/soc/atmel/snd-soc-afeb9260.c | 35 +- sound/soc/au1x/db1200.c | 35 +- sound/soc/au1x/dbdma2.c | 19 +- sound/soc/au1x/psc-ac97.c | 20 +- sound/soc/au1x/psc-i2s.c | 21 +- sound/soc/au1x/psc.h | 3 - sound/soc/blackfin/bf5xx-ac97-pcm.c | 43 ++- sound/soc/blackfin/bf5xx-ac97-pcm.h | 3 - sound/soc/blackfin/bf5xx-ac97.c | 41 ++- sound/soc/blackfin/bf5xx-ac97.h | 2 - sound/soc/blackfin/bf5xx-ad1836.c | 23 +- sound/soc/blackfin/bf5xx-ad193x.c | 23 +- sound/soc/blackfin/bf5xx-ad1980.c | 19 +- sound/soc/blackfin/bf5xx-ad73311.c | 22 +- sound/soc/blackfin/bf5xx-i2s-pcm.c | 44 ++- sound/soc/blackfin/bf5xx-i2s-pcm.h | 3 - sound/soc/blackfin/bf5xx-i2s.c | 45 ++- sound/soc/blackfin/bf5xx-i2s.h | 14 - sound/soc/blackfin/bf5xx-ssm2602.c | 38 +-- sound/soc/blackfin/bf5xx-tdm-pcm.c | 43 ++- sound/soc/blackfin/bf5xx-tdm-pcm.h | 3 - sound/soc/blackfin/bf5xx-tdm.c | 17 +- sound/soc/blackfin/bf5xx-tdm.h | 2 - sound/soc/davinci/davinci-evm.c | 109 ++--- sound/soc/davinci/davinci-i2s.c | 44 +- sound/soc/davinci/davinci-i2s.h | 2 - sound/soc/davinci/davinci-mcasp.c | 34 +- sound/soc/davinci/davinci-mcasp.h | 2 - sound/soc/davinci/davinci-pcm.c | 45 ++- sound/soc/davinci/davinci-pcm.h | 3 - sound/soc/davinci/davinci-sffsdr.c | 27 +- sound/soc/davinci/davinci-vcif.c | 25 +- sound/soc/davinci/davinci-vcif.h | 28 - sound/soc/ep93xx/ep93xx-i2s.c | 38 +- sound/soc/ep93xx/ep93xx-i2s.h | 18 - sound/soc/ep93xx/ep93xx-pcm.c | 37 +- sound/soc/ep93xx/ep93xx-pcm.h | 2 - sound/soc/ep93xx/snappercl15.c | 24 +- sound/soc/fsl/Kconfig | 3 - sound/soc/fsl/Makefile | 3 - sound/soc/fsl/efika-audio-fabric.c | 20 +- sound/soc/fsl/fsl_dma.c | 312 +++++++----- sound/soc/fsl/fsl_dma.h | 20 - sound/soc/fsl/fsl_ssi.c | 249 ++++++---- sound/soc/fsl/fsl_ssi.h | 26 - sound/soc/fsl/mpc5200_dma.c | 66 ++- sound/soc/fsl/mpc5200_dma.h | 5 - sound/soc/fsl/mpc5200_psc_ac97.c | 34 +- sound/soc/fsl/mpc5200_psc_ac97.h | 2 - sound/soc/fsl/mpc5200_psc_i2s.c | 19 +- sound/soc/fsl/mpc8610_hpcd.c | 658 ++++++++++++------------- sound/soc/fsl/pcm030-audio-fabric.c | 21 +- sound/soc/fsl/soc-of-simple.c | 170 ------- sound/soc/imx/Kconfig | 16 + sound/soc/imx/Makefile | 10 +- sound/soc/imx/eukrea-tlv320.c | 16 +- sound/soc/imx/imx-pcm-dma-mx2.c | 43 ++- sound/soc/imx/imx-pcm-fiq.c | 81 ++- sound/soc/imx/imx-ssi.c | 111 ++--- sound/soc/imx/imx-ssi.h | 5 +- sound/soc/imx/phycore-ac97.c | 16 +- sound/soc/imx/wm1133-ev1.c | 27 +- sound/soc/jz4740/jz4740-i2s.c | 108 ++-- sound/soc/jz4740/jz4740-i2s.h | 2 - sound/soc/jz4740/jz4740-pcm.c | 18 +- sound/soc/jz4740/jz4740-pcm.h | 2 - sound/soc/jz4740/qi_lb60.c | 20 +- sound/soc/kirkwood/kirkwood-dma.c | 64 ++- sound/soc/kirkwood/kirkwood-dma.h | 17 - sound/soc/kirkwood/kirkwood-i2s.c | 54 ++- sound/soc/kirkwood/kirkwood-i2s.h | 17 - sound/soc/kirkwood/kirkwood-openrd.c | 21 +- sound/soc/nuc900/nuc900-ac97.c | 12 +- sound/soc/nuc900/nuc900-audio.c | 16 +- sound/soc/nuc900/nuc900-audio.h | 4 - sound/soc/nuc900/nuc900-pcm.c | 38 +- sound/soc/omap/am3517evm.c | 25 +- sound/soc/omap/ams-delta.c | 53 +-- sound/soc/omap/igep0020.c | 22 +- sound/soc/omap/mcpdm.c | 19 +- sound/soc/omap/mcpdm.h | 2 + sound/soc/omap/n810.c | 42 +-- sound/soc/omap/omap-mcbsp.c | 123 +++--- sound/soc/omap/omap-mcbsp.h | 2 - sound/soc/omap/omap-mcpdm.c | 71 ++- sound/soc/omap/omap-mcpdm.h | 29 -- sound/soc/omap/omap-pcm.c | 47 ++- sound/soc/omap/omap-pcm.h | 2 - sound/soc/omap/omap2evm.c | 25 +- sound/soc/omap/omap3beagle.c | 23 +- sound/soc/omap/omap3evm.c | 30 +- sound/soc/omap/omap3pandora.c | 36 +- sound/soc/omap/osk5912.c | 24 +- sound/soc/omap/overo.c | 22 +- sound/soc/omap/rx51.c | 37 +- sound/soc/omap/sdp3430.c | 56 +-- sound/soc/omap/sdp4430.c | 23 +- sound/soc/omap/zoom2.c | 64 +-- sound/soc/s6000/s6000-i2s.c | 58 +-- sound/soc/s6000/s6000-i2s.h | 2 - sound/soc/s6000/s6000-pcm.c | 100 +++-- sound/soc/s6000/s6000-pcm.h | 2 - sound/soc/s6000/s6105-ipcam.c | 31 +- sound/soc/sh/dma-sh7760.c | 53 ++- sound/soc/sh/fsi-ak4642.c | 24 +- sound/soc/sh/fsi-da7210.c | 22 +- sound/soc/sh/fsi.c | 47 +-- sound/soc/sh/hac.c | 46 ++- sound/soc/sh/migor.c | 29 +- sound/soc/sh/sh7760-ac97.c | 25 +- sound/soc/sh/siu.h | 5 +- sound/soc/sh/siu_dai.c | 66 ++-- sound/soc/sh/siu_pcm.c | 32 +- sound/soc/sh/ssi.c | 55 ++- sound/soc/txx9/txx9aclc-ac97.c | 57 +-- sound/soc/txx9/txx9aclc-generic.c | 24 +- sound/soc/txx9/txx9aclc.c | 141 +++--- sound/soc/txx9/txx9aclc.h | 13 +- 148 files changed, 2555 insertions(+), 2863 deletions(-) delete mode 100644 include/sound/soc-of-simple.h delete mode 100644 sound/soc/blackfin/bf5xx-i2s.h delete mode 100644 sound/soc/davinci/davinci-vcif.h delete mode 100644 sound/soc/ep93xx/ep93xx-i2s.h delete mode 100644 sound/soc/fsl/soc-of-simple.c delete mode 100644 sound/soc/kirkwood/kirkwood-dma.h delete mode 100644 sound/soc/kirkwood/kirkwood-i2s.h delete mode 100644 sound/soc/omap/omap-mcpdm.h

6 28

[alsa-devel] aplay -l messes up terminal settings.
by Eliot Blennerhassett 18 Aug '10

18 Aug '10

Hi Jaroslav, there is something wrong with the last commit to aplay (at least for me Gnome terminal 2.29.6). When I do aplay -l or aplay -L, my keystrokes are subsequently not echoed in the terminal. regards Eliot 73c79ebf26a51a2d9b582a4cae82867873875743 is the first bad commit commit 73c79ebf26a51a2d9b582a4cae82867873875743 Author: Jaroslav Kysela <perex(a)perex.cz> Date: Thu Jul 15 13:39:14 2010 +0200 aplay: fix termio settings - return back old c_flag value on exit - symptom - ssh client password authentication does not work with the modified terminal settings Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> :040000 040000 f7624e3b40c38f4bb2ae450b5e94ec938ffddc90 33ffa7e2c1729c6e738db25f68deb843a8a67245 M aplay -- Eliot Blennerhassett AudioScience Inc.

3 2

[alsa-devel] 0005090: hda-intel (alc887) unable to access alsamixer/amixer to unmute default sound
by Brock 18 Aug '10

18 Aug '10

Hi, I need some assistance with alc887 and amixer/alsamixer. Please see bug post 0005090. Which explains the problem. Very happy to provide additional information or assistance is needed Unfortunately, I do not have the knowledge to fix the issue. cheers lumpy

2 1

[alsa-devel] help needed: support of Tascam us 1641 usb 2.0 with support provided from company (was: [Alsa-devel] Tascam us 1641 usb 2.0)
by Paul Menzel 17 Aug '10

17 Aug '10

[Sorry for the double posts you guys in CC. I got the wrong list address the first time.] Dear ALSA developers, Christoph sent the following message to alsa-user. Maybe someone can step up to this task or at least tell how much work this will be. It looks like, Karten wrote the support for the other Tascam devices. commit 030a07e441296c372f946cd4065b5d831d8dc40c Author: Karsten Wiese <fzu(a)wemgehoertderstaat.de> Date: Wed Jul 30 15:13:29 2008 +0200 ALSA: Add USB US122L driver Added a new US122L usb-audio driver. This driver works together with a dedicated alsa-lib plugin. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> @Christoph: I got this, cloning the Linux kernel tree and running the following. git log sound/usb/usx2y/us122l.c Thanks, Paul PS: Sorry for top posting, but I think in this case it is feasible, because I changed the lists. Am Montag, den 16.08.2010, 17:32 +0200 schrieb "Christoph Köditz": > Hello there, > > I have contacted Tascam because of the us-1641. They had send me an answer (in German): > > "...Linux Treiber sind von unserer Seite her nicht geplant. Die Treiber basieren aber auf einem identischen Konzept wie die des US-144. > Bisher wurde von Seitens des ALSA Projects keine bitte um, eine Unterstützung für die Treiber Entwicklung des US-1641 an uns herangetragen. > Wir hatten einem hier in Deutschland ansässigen Teilnehmer des Projekt bereits für die Entwicklung der US-122L und US-144 Treiber leihweise Geräte als Entwicklungsgrundlage zur Verfügung gestellt und könnten uns ähnliches auch in diesem Fall vorstellen. ..." > > They said: > They don't planned any Linux-drivers. But the drivers are based on an identical concept like the US-144. So far, the ALSA Project not asked for a driver support for the development of the US 1641. > They hired an in Germany living developer an US-122L and an US144 for developing a driver. In this case they think, they would do something like that. > > I hope anyone helps this information. > > Regards, Chris > > -------- Original-Nachricht -------- > > Datum: Wed, 4 Aug 2010 12:11:46 +0100 > > Von: ael <law_ence.dev(a)ntlworld.com> > > An: "Christoph Köditz" <ckoeditz(a)gmx.de> > > Betreff: Re: [Alsa-user] Tascam us 1641 usb 2.0 > > > On Wed, Aug 04, 2010 at 11:23:27AM +0200, "Christoph Köditz" wrote: > > > Hello there, > > > > > > I've got a question. I want to know if the Tascam us 1641 USB Interface > > is supported or is not supported in opensuse. > > > > You might get an answer from some kind person, but probably not. > > alsa is a project for linux in general. opensuse is just one > > distribution: you should ask them. Or better, look to see which kernel > > is in use, download the source, and look for yourself. > > > > If necessary, you might want to collect and install a current kernel > > if it supports your hardware. > > > > ael > > > > PS. As I happen to have the latest kernel source, I did a quick grep for > > you and found:- > > > > 1) > > Module snd-usb-usx2y > > -------------------- > > > > Module for Tascam USB US-122, US-224 and US-428 devices. > > > > This module supports multiple devices, autoprobe and hotplugging. > > > > Note: you need to load the firmware via usx2yloader utility included > > in alsa-tools and alsa-firmware packages. > > ----------------------------------------------------------- > > (This was under Documentation, so might be out of date) > > > > 2) Many hits under sound:- > > > > usb/usx2y/us122l.c:MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version > > 0.5"); > > usb/usx2y/us122l.c: sprintf(card->shortname, "TASCAM "NAME_ALLCAPS""); > > usb/usx2y/usX2Yhwdep.c: * Driver for Tascam US-X2Y USB soundcards > > usb/usx2y/usX2Yhwdep.c: .vendor_name = "TASCAM", > > usb/usx2y/usX2Yhwdep.c: .vendor_name = "TASCAM", > > usb/usx2y/usbusx2yaudio.c: { 0x18, 0x40}, // only tascam / frontier design > > knows the further lines ....... > > usb/usx2y/usbusx2yaudio.c: { 0x18, 0x40}, // only tascam / frontier design > > knows the further lines ....... > > usb/usx2y/usbusx2y.c: Removed EZUSB Firmware. First Stage Firmwaredownload > > is now done by tascam-firmware downloader. > > usb/usx2y/usbusx2y.c: http://usb-midi-fw.sourceforge.net/tascam-firmware.tar.gz > > usb/usx2y/usbusx2y.c:MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version > > 0.8.7.2"); > > usb/usx2y/usbusx2y.c:MODULE_SUPPORTED_DEVICE("{{TASCAM(0x1604), > > "NAME_ALLCAPS"(0x8001)(0x8005)(0x8007) }}"); > > usb/usx2y/usbusx2y.c: sprintf(card->shortname, "TASCAM "NAME_ALLCAPS""); > > usb/usx2y/usx2y.h: * Driver for Tascam US-X2Y USB soundcards > > usb/Kconfig: tristate "Tascam US-122, US-224 and US-428 USB driver" > > usb/Kconfig: Say Y here to include support for Tascam USB Audio/MIDI > > usb/Kconfig: tristate "Tascam US-122L USB driver" > > usb/Kconfig: Say Y here to include support for Tascam US-122L USB > > Audio/MIDI > > ---------------------------------------------------------------- > > > > So it looks as if you might need to look in us122l.c, usX2Yhwdep.c, etc. > > Of course, I have no idea whether these US-X2Y soundcards have the 1641 > > interface you mention. > > > > -- > Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief! > Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by > > Make an app they can't live without > Enter the BlackBerry Developer Challenge > http://p.sf.net/sfu/RIM-dev2dev > _______________________________________________ > Alsa-user mailing list > Alsa-user(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-user

1 0

[alsa-devel] intel 8x0 ALSA driver in virtualbox - choppy sound
by Lex F 17 Aug '10

17 Aug '10

Dear all I am having problems with getting sound running well in Arch Linux guest (VirtualBox 3.2.8), the host is OS X Snow Leopard. The problem is that the sound is very choppy. I've checked around VirtualBox and Arch forums and it seems that some others experience these problems as well yet I could not see anyone sufficiently skilled to debug this paying attention. I think there is a problem with either VirtualBox implementation of the sound card or a bug in ALSA driver for that card because I have sound running just fine in VMWare Fusion (using es1371 (?) driver), so the host system definitely is fast enough for decent sound quality. I would like to offer my help with identifying the cause of the problem and testing solutions if the need be. I've attached my alsa-info output for your reference. Please let me know if there is anything else I could try to help. I am very keen to help but I don't know how. Best regards, Lex

4 5

[alsa-devel] [PATCH 1/3] ASoC: add 88pm860x codec driver
by Haojian Zhuang 17 Aug '10

17 Aug '10

2 5

[alsa-devel] ASoC update for 2.6.36
by Mark Brown 17 Aug '10

17 Aug '10

The following changes since commit da5cabf80e2433131bf0ed8993abc0f7ea618c73: Linux 2.6.36-rc1 (2010-08-15 17:41:37 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.36 Another small, focused change. Mark Brown (1): ASoC: Remove DSP mode support for WM8776 sound/soc/codecs/wm8776.c | 7 ------- 1 files changed, 0 insertions(+), 7 deletions(-)

2 1

[alsa-devel] [PATCH] ASoC: multi-component - Drop board-n8x0.c changes
by Jarkko Nikula 17 Aug '10

17 Aug '10

These will conflict with queued changes to board-n8x0.c coming from linux-omap tree. Only side effect from this dropping is that the integrated digital microphone on Nokia N810 will stop working when ASoC multi-component is merged. As currently the N810 is not very usable in mainline, I consider this as a minor issue that can be fixed in linux-omap tree the after the multi-component is merged. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- arch/arm/mach-omap2/board-n8x0.c | 15 --------------- 1 files changed, 0 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 04df912..3ccc34e 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -20,7 +20,6 @@ #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/usb/musb.h> -#include <sound/tlv320aic3x.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -613,25 +612,11 @@ static int n8x0_menelaus_late_init(struct device *dev) return 0; } -static struct aic3x_setup_data n810_aic33_setup = { - .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, - .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, -}; - -static struct aic3x_pdata n810_aic33_data = { - .setup = &n810_aic33_setup, - .gpio_reset = -1, -}; - static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = { { I2C_BOARD_INFO("menelaus", 0x72), .irq = INT_24XX_SYS_NIRQ, }, - { - I2C_BOARD_INFO("tlv320aic3x", 0x1b), - .platform_data = &n810_aic33_data, - }, }; static struct menelaus_platform_data n8x0_menelaus_platform_data = { -- 1.7.1

2 1

[alsa-devel] [PATCH] ASoC: Multi-component: JZ4740: QI_LB60 board fixes
by Lars-Peter Clausen 17 Aug '10

17 Aug '10

This patch contains two small fixes for the sound board driver for the qi_lb60 introduced by the multi-component patches: * Remove unnecessary includes: Those includes where only used to get the definitions for the DAI devices and are thus not needed anymore. * Fix a typo. Signed-off-By: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/soc/jz4740/qi_lb60.c | 7 +------ 1 files changed, 1 insertions(+), 6 deletions(-) diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c index 78dabeb..ef1a99e 100644 --- a/sound/soc/jz4740/qi_lb60.c +++ b/sound/soc/jz4740/qi_lb60.c @@ -22,11 +22,6 @@ #include <sound/soc-dapm.h> #include <linux/gpio.h> -#include "../codecs/jz4740.h" -#include "jz4740-pcm.h" -#include "jz4740-i2s.h" - - #define QI_LB60_SND_GPIO JZ_GPIO_PORTB(29) #define QI_LB60_AMP_GPIO JZ_GPIO_PORTD(4) @@ -86,7 +81,7 @@ static struct snd_soc_dai_link qi_lb60_dai = { .name = "jz4740", .stream_name = "jz4740", .cpu_dai_name = "jz4740-i2s", - .platform_name = "jz4740-pmc-audio", + .platform_name = "jz4740-pcm-audio", .codec_dai_name = "jz4740-hifi", .codec_name = "jz4740-codec", .init = qi_lb60_codec_init, -- 1.5.6.5

2 1

[alsa-devel] [PATCH 0/3] ASoC: add 88pm860x codec driver and machine driver
by Haojian Zhuang 17 Aug '10

17 Aug '10

Functions: 1. append 88pm860x codec driver 2. add tavorevb3 machine driver 3. add saarb machine driver Updates from v1 patches 1. Remove jack support. These will be append in later patches. 2. Remove EQ support. These will be append in later patches. 3. Update patches according to comments. Thanks Haojian

2 1

[alsa-devel] [PATCH 1/3] ASoC: add 88pm860x codec driver
by Haojian Zhuang 17 Aug '10

17 Aug '10

Attach it only.

1 0

[alsa-devel] [PATCH 3/3] ASoC: add saarb machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

1 0

[alsa-devel] [PATCH 2/3] ASoC: add tavorevb3 machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

1 0

Re: [alsa-devel] ALC892 support for multiple spdif outputs
by Takashi Iwai 17 Aug '10

17 Aug '10

At Mon, 16 Aug 2010 09:52:31 +0200, Sander Knopper wrote: > > [1 <text/plain; iso-8859-1 (7bit)>] > On Monday 16 August 2010 08:42:07 you wrote: > > At Sun, 15 Aug 2010 14:57:51 +0200, > > > > Sander Knopper wrote: > > > Dear developers, > > > > > > I've opened a bug about this problem which can be viewed here: > > > https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5101 > > > > > > Raymond mentions in his last comment that I should ask you to, if I > > > understand correctly, do the same trick as in the commit he refers to > > > also for the ALC892 chip. Which obviously is the one I have... > > > > > > You can find all the relevant information in the bug entry. > > > > Could you post the exact problem and attach alsa-info.sh output to ML? > > It'll help much for communication on ML. > > > > > > Takashi > > Ok, I can do that... > > The problem is that I have an Asus P7H55 M Pro motherboard which uses the > ALC892 codec. I'm using this system as a HTPC and thus I'm trying to get sound > from the HTPC to my receiver. The motherboard only has an optical output which > shouldn't be an problem, be it that my receiver only has a coaxial input. > > So I bought an spdif bracket made by Asus which has both a coaxial and optical > output and connected it to the internal spdif pins on the motherboard. So far > so good, but the real problem is that I can't get the bracket to work. When I > unmute all the spdif related entries with alsamixer only the optical output on > the motherboard itself "gives light" and the one on the bracket doesn't. > > I've searched the internet a bit and I tried switching the audio output in the > bios from HDMI to SPDIF and vice versa, but that doesn't make any difference. > > alsa-info is attached. OK. Did you test the latest alsa-driver-snapshot? ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-sna… The multi-SPDIF support is generic for all Realtek codecs. Takashi

2 3

[PATCH 3/3] ASoC: add saarb machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

88PM860x codec is used in Marvell saarb development board. 88PM860x codec is used as master mode for SSP communication. Only I2S format is supported. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/Kconfig | 9 +++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/saarb.c | 178 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 189 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/saarb.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 04ddc7b..37f191b 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -117,6 +117,15 @@ config SND_PXA2XX_SOC_PALM27X Say Y if you want to add support for SoC audio on Palm T|X, T5, E2 or LifeDrive handheld computer. +config SND_SOC_SAARB + tristate "SoC Audio support for Marvell Saarb" + depends on SND_PXA2XX_SOC && MACH_SAARB + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + config SND_SOC_TAVOREVB3 tristate "SoC Audio support for Marvell Tavor EVB3" depends on SND_PXA2XX_SOC && MACH_TAVOREVB3 diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 315941f..0766016 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -19,6 +19,7 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-saarb-objs := saarb.o snd-soc-tavorevb3-objs := tavorevb3.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o @@ -39,6 +40,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o +obj-$(CONFIG_SND_SOC_SAARB) += snd-soc-saarb.o obj-$(CONFIG_SND_SOC_TAVOREVB3) += snd-soc-tavorevb3.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o diff --git a/sound/soc/pxa/saarb.c b/sound/soc/pxa/saarb.c new file mode 100644 index 0000000..3f6ec57 --- /dev/null +++ b/sound/soc/pxa/saarb.c @@ -0,0 +1,178 @@ +/* + * saarb.c -- SoC audio for saarb + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "pxa-ssp.h" + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *saarb_snd_device; +/* saarb machine dapm widgets */ +static const struct snd_soc_dapm_widget saarb_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Board Speaker", NULL), + SND_SOC_DAPM_MIC("Board Mic 1", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Board Mic 3", NULL), +}; + +/* saarb machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone", NULL, "HS1"}, + {"Headphone", NULL, "HS2"}, + + {"Board Speaker", NULL, "LSP"}, + {"Board Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Board Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Headset Mic"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Board Mic 3"}, +}; + +static const struct snd_kcontrol_new pm860x_saarb_controls[] = { + SOC_DAPM_PIN_SWITCH("Board Speaker"), + SOC_DAPM_PIN_SWITCH("Board Mic 1"), + SOC_DAPM_PIN_SWITCH("Board Mic 3"), +}; + +static int saarb_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + + return ret; +} + +static struct snd_soc_ops saarb_i2s_ops = { + .hw_params = saarb_i2s_hw_params, +}; + +static struct snd_soc_dai_link saarb_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = saarb_pm860x_init, + .ops = &saarb_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_saarb = { + .name = "Saarb", + .dai_link = saarb_dai, + .num_links = ARRAY_SIZE(saarb_dai), +}; + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + ret = snd_soc_add_controls(codec, pm860x_saarb_controls, + ARRAY_SIZE(pm860x_saarb_controls)); + if (ret < 0) + return ret; + + snd_soc_dapm_new_controls(codec, saarb_dapm_widgets, + ARRAY_SIZE(saarb_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_disable_pin(codec, "Board Speaker"); + snd_soc_dapm_disable_pin(codec, "Board Mic 1"); + snd_soc_dapm_disable_pin(codec, "Board Mic 3"); + snd_soc_dapm_enable_pin(codec, "Headset Mic"); + + return snd_soc_dapm_sync(codec); +} + +static int __init saarb_init(void) +{ + int ret; + + if (!machine_is_saarb()) + return -ENODEV; + saarb_snd_device = platform_device_alloc("soc-audio", -1); + if (!saarb_snd_device) + return -ENOMEM; + + platform_set_drvdata(saarb_snd_device, &snd_soc_card_saarb); + + ret = platform_device_add(saarb_snd_device); + if (ret) + platform_device_put(saarb_snd_device); + + return ret; +} + +static void __exit saarb_exit(void) +{ + platform_device_unregister(saarb_snd_device); +} + +module_init(saarb_init); +module_exit(saarb_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Saarb"); +MODULE_LICENSE("GPL"); -- 1.5.6.5 --0016e65aeed62e9cc9048e002c76 Content-Type: text/x-patch; charset=US-ASCII; name="0003-ASoC-add-saarb-machine-driver-for-88pm860x.patch" Content-Disposition: attachment; filename="0003-ASoC-add-saarb-machine-driver-for-88pm860x.patch" Content-Transfer-Encoding: base64 X-Attachment-Id: f_gcyg0e4a0 RnJvbSAwMmEyOTA3NzA0MmE4YmNiNDEyMmZjYzIzOTNjYmM5ZDA3YWY4MDExIE1vbiBTZXAgMTcg MDA6MDA6MDAgMjAwMQpGcm9tOiBIYW9qaWFuIFpodWFuZyA8aGFvamlhbi56aHVhbmdAbWFydmVs bC5jb20+CkRhdGU6IFR1ZSwgMTcgQXVnIDIwMTAgMTM6NTM6MTQgKzA4MDAKU3ViamVjdDogW1BB VENIIDMvM10gQVNvQzogYWRkIHNhYXJiIG1hY2hpbmUgZHJpdmVyIGZvciA4OHBtODYweAoKODhQ TTg2MHggY29kZWMgaXMgdXNlZCBpbiBNYXJ2ZWxsIHNhYXJiIGRldmVsb3BtZW50IGJvYXJkLiA4 OFBNODYweCBjb2RlYwppcyB1c2VkIGFzIG1hc3RlciBtb2RlIGZvciBTU1AgY29tbXVuaWNhdGlv bi4gT25seSBJMlMgZm9ybWF0IGlzIHN1cHBvcnRlZC4KClNpZ25lZC1vZmYtYnk6IEhhb2ppYW4g Wmh1YW5nIDxoYW9qaWFuLnpodWFuZ0BtYXJ2ZWxsLmNvbT4KLS0tCiBzb3VuZC9zb2MvcHhhL0tj b25maWcgIHwgICAgOSArKysKIHNvdW5kL3NvYy9weGEvTWFrZWZpbGUgfCAgICAyICsKIHNvdW5k L3NvYy9weGEvc2FhcmIuYyAgfCAgMTc4ICsrKysrKysrKysrKysrKysrKysrKysrKysrKysrKysr KysrKysrKysrKysrKysrKwogMyBmaWxlcyBjaGFuZ2VkLCAxODkgaW5zZXJ0aW9ucygrKSwgMCBk ZWxldGlvbnMoLSkKIGNyZWF0ZSBtb2RlIDEwMDY0NCBzb3VuZC9zb2MvcHhhL3NhYXJiLmMKCmRp ZmYgLS1naXQgYS9zb3VuZC9zb2MvcHhhL0tjb25maWcgYi9zb3VuZC9zb2MvcHhhL0tjb25maWcK aW5kZXggMDRkZGM3Yi4uMzdmMTkxYiAxMDA2NDQKLS0tIGEvc291bmQvc29jL3B4YS9LY29uZmln CisrKyBiL3NvdW5kL3NvYy9weGEvS2NvbmZpZwpAQCAtMTE3LDYgKzExNywxNSBAQCBjb25maWcg U05EX1BYQTJYWF9TT0NfUEFMTTI3WAogCSAgU2F5IFkgaWYgeW91IHdhbnQgdG8gYWRkIHN1cHBv cnQgZm9yIFNvQyBhdWRpbyBvbgogCSAgUGFsbSBUfFgsIFQ1LCBFMiBvciBMaWZlRHJpdmUgaGFu ZGhlbGQgY29tcHV0ZXIuCiAKK2NvbmZpZyBTTkRfU09DX1NBQVJCCisJdHJpc3RhdGUgIlNvQyBB dWRpbyBzdXBwb3J0IGZvciBNYXJ2ZWxsIFNhYXJiIgorCWRlcGVuZHMgb24gU05EX1BYQTJYWF9T T0MgJiYgTUFDSF9TQUFSQgorCXNlbGVjdCBTTkRfUFhBX1NPQ19TU1AKKwlzZWxlY3QgU05EX1NP Q184OFBNODYwWAorCWhlbHAKKwkgIFNheSBZIGlmIHlvdSB3YW50IHRvIGFkZCBzdXBwb3J0IGZv ciBTb0MgYXVkaW8gb24gdGhlCisJICBNYXJ2ZWxsIFNhYXJiIHJlZmVyZW5jZSBwbGF0Zm9ybS4K KwogY29uZmlnIFNORF9TT0NfVEFWT1JFVkIzCiAJdHJpc3RhdGUgIlNvQyBBdWRpbyBzdXBwb3J0 IGZvciBNYXJ2ZWxsIFRhdm9yIEVWQjMiCiAJZGVwZW5kcyBvbiBTTkRfUFhBMlhYX1NPQyAmJiBN QUNIX1RBVk9SRVZCMwpkaWZmIC0tZ2l0IGEvc291bmQvc29jL3B4YS9NYWtlZmlsZSBiL3NvdW5k L3NvYy9weGEvTWFrZWZpbGUKaW5kZXggMzE1OTQxZi4uMDc2NjAxNiAxMDA2NDQKLS0tIGEvc291 bmQvc29jL3B4YS9NYWtlZmlsZQorKysgYi9zb3VuZC9zb2MvcHhhL01ha2VmaWxlCkBAIC0xOSw2 ICsxOSw3IEBAIHNuZC1zb2MtZTgwMC1vYmpzIDo9IGU4MDBfd205NzEyLm8KIHNuZC1zb2Mtc3Bp dHotb2JqcyA6PSBzcGl0ei5vCiBzbmQtc29jLWVtLXgyNzAtb2JqcyA6PSBlbS14MjcwLm8KIHNu ZC1zb2MtcGFsbTI3eC1vYmpzIDo9IHBhbG0yN3gubworc25kLXNvYy1zYWFyYi1vYmpzIDo9IHNh YXJiLm8KIHNuZC1zb2MtdGF2b3JldmIzLW9ianMgOj0gdGF2b3JldmIzLm8KIHNuZC1zb2Mtenls b25pdGUtb2JqcyA6PSB6eWxvbml0ZS5vCiBzbmQtc29jLW1hZ2ljaWFuLW9ianMgOj0gbWFnaWNp YW4ubwpAQCAtMzksNiArNDAsNyBAQCBvYmotJChDT05GSUdfU05EX1BYQTJYWF9TT0NfUEFMTTI3 WCkgKz0gc25kLXNvYy1wYWxtMjd4Lm8KIG9iai0kKENPTkZJR19TTkRfUFhBMlhYX1NPQ19NQUdJ Q0lBTikgKz0gc25kLXNvYy1tYWdpY2lhbi5vCiBvYmotJChDT05GSUdfU05EX1BYQTJYWF9TT0Nf TUlPQTcwMSkgKz0gc25kLXNvYy1taW9hNzAxLm8KIG9iai0kKENPTkZJR19TTkRfUFhBMlhYX1NP Q19aMikgKz0gc25kLXNvYy16Mi5vCitvYmotJChDT05GSUdfU05EX1NPQ19TQUFSQikgKz0gc25k LXNvYy1zYWFyYi5vCiBvYmotJChDT05GSUdfU05EX1NPQ19UQVZPUkVWQjMpICs9IHNuZC1zb2Mt dGF2b3JldmIzLm8KIG9iai0kKENPTkZJR19TTkRfU09DX1pZTE9OSVRFKSArPSBzbmQtc29jLXp5 bG9uaXRlLm8KIG9iai0kKENPTkZJR19TTkRfUFhBMlhYX1NPQ19JTU9URTIpICs9IHNuZC1zb2Mt aW1vdGUyLm8KZGlmZiAtLWdpdCBhL3NvdW5kL3NvYy9weGEvc2FhcmIuYyBiL3NvdW5kL3NvYy9w eGEvc2FhcmIuYwpuZXcgZmlsZSBtb2RlIDEwMDY0NAppbmRleCAwMDAwMDAwLi4zZjZlYzU3Ci0t LSAvZGV2L251bGwKKysrIGIvc291bmQvc29jL3B4YS9zYWFyYi5jCkBAIC0wLDAgKzEsMTc4IEBA CisvKgorICogc2FhcmIuYyAtLSBTb0MgYXVkaW8gZm9yIHNhYXJiCisgKgorICogQ29weXJpZ2h0 IChDKSAyMDEwIE1hcnZlbGwgSW50ZXJuYXRpb25hbCBMdGQuCisgKiAJSGFvamlhbiBaaHVhbmcg PGhhb2ppYW4uemh1YW5nQG1hcnZlbGwuY29tPgorICoKKyAqIFRoaXMgcHJvZ3JhbSBpcyBmcmVl IHNvZnR3YXJlOyB5b3UgY2FuIHJlZGlzdHJpYnV0ZSBpdCBhbmQvb3IgbW9kaWZ5CisgKiBpdCB1 bmRlciB0aGUgdGVybXMgb2YgdGhlIEdOVSBHZW5lcmFsIFB1YmxpYyBMaWNlbnNlIHZlcnNpb24g MiBhcworICogcHVibGlzaGVkIGJ5IHRoZSBGcmVlIFNvZnR3YXJlIEZvdW5kYXRpb24uCisgKi8K KworI2luY2x1ZGUgPGxpbnV4L21vZHVsZS5oPgorI2luY2x1ZGUgPGxpbnV4L21vZHVsZXBhcmFt Lmg+CisjaW5jbHVkZSA8bGludXgvZGV2aWNlLmg+CisjaW5jbHVkZSA8bGludXgvY2xrLmg+Cisj aW5jbHVkZSA8bGludXgvaTJjLmg+CisjaW5jbHVkZSA8c291bmQvY29yZS5oPgorI2luY2x1ZGUg PHNvdW5kL3BjbS5oPgorI2luY2x1ZGUgPHNvdW5kL3BjbV9wYXJhbXMuaD4KKyNpbmNsdWRlIDxz b3VuZC9zb2MuaD4KKyNpbmNsdWRlIDxzb3VuZC9zb2MtZGFwbS5oPgorCisjaW5jbHVkZSA8YXNt L21hY2gtdHlwZXMuaD4KKworI2luY2x1ZGUgIi4uL2NvZGVjcy84OHBtODYweC1jb2RlYy5oIgor I2luY2x1ZGUgInB4YS1zc3AuaCIKKworc3RhdGljIGludCBzYWFyYl9wbTg2MHhfaW5pdChzdHJ1 Y3Qgc25kX3NvY19wY21fcnVudGltZSAqcnRkKTsKKworc3RhdGljIHN0cnVjdCBwbGF0Zm9ybV9k ZXZpY2UgKnNhYXJiX3NuZF9kZXZpY2U7CisvKiBzYWFyYiBtYWNoaW5lIGRhcG0gd2lkZ2V0cyAq Lworc3RhdGljIGNvbnN0IHN0cnVjdCBzbmRfc29jX2RhcG1fd2lkZ2V0IHNhYXJiX2RhcG1fd2lk Z2V0c1tdID0geworCVNORF9TT0NfREFQTV9IUCgiSGVhZHBob25lIiwgTlVMTCksCisJU05EX1NP Q19EQVBNX0xJTkUoIkxpbmVvdXQgT3V0IDEiLCBOVUxMKSwKKwlTTkRfU09DX0RBUE1fTElORSgi TGluZW91dCBPdXQgMiIsIE5VTEwpLAorCVNORF9TT0NfREFQTV9TUEsoIkJvYXJkIFNwZWFrZXIi LCBOVUxMKSwKKwlTTkRfU09DX0RBUE1fTUlDKCJCb2FyZCBNaWMgMSIsIE5VTEwpLAorCVNORF9T T0NfREFQTV9NSUMoIkhlYWRzZXQgTWljIiwgTlVMTCksCisJU05EX1NPQ19EQVBNX01JQygiQm9h cmQgTWljIDMiLCBOVUxMKSwKK307CisKKy8qIHNhYXJiIG1hY2hpbmUgYXVkaW8gbWFwICovCitz dGF0aWMgY29uc3Qgc3RydWN0IHNuZF9zb2NfZGFwbV9yb3V0ZSBhdWRpb19tYXBbXSA9IHsKKwl7 IkhlYWRwaG9uZSIsIE5VTEwsICJIUzEifSwKKwl7IkhlYWRwaG9uZSIsIE5VTEwsICJIUzIifSwK KworCXsiQm9hcmQgU3BlYWtlciIsIE5VTEwsICJMU1AifSwKKwl7IkJvYXJkIFNwZWFrZXIiLCBO VUxMLCAiTFNOIn0sCisKKwl7IkxpbmVvdXQgT3V0IDEiLCBOVUxMLCAiTElORU9VVDEifSwKKwl7 IkxpbmVvdXQgT3V0IDIiLCBOVUxMLCAiTElORU9VVDIifSwKKworCXsiTUlDMVAiLCBOVUxMLCAi TWljMSBCaWFzIn0sCisJeyJNSUMxTiIsIE5VTEwsICJNaWMxIEJpYXMifSwKKwl7Ik1pYzEgQmlh cyIsIE5VTEwsICJCb2FyZCBNaWMgMSJ9LAorCisJeyJNSUMyUCIsIE5VTEwsICJNaWMxIEJpYXMi fSwKKwl7Ik1JQzJOIiwgTlVMTCwgIk1pYzEgQmlhcyJ9LAorCXsiTWljMSBCaWFzIiwgTlVMTCwg IkhlYWRzZXQgTWljIn0sCisKKwl7Ik1JQzNQIiwgTlVMTCwgIk1pYzMgQmlhcyJ9LAorCXsiTUlD M04iLCBOVUxMLCAiTWljMyBCaWFzIn0sCisJeyJNaWMzIEJpYXMiLCBOVUxMLCAiQm9hcmQgTWlj IDMifSwKK307CisKK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc25kX2tjb250cm9sX25ldyBwbTg2MHhf c2FhcmJfY29udHJvbHNbXSA9IHsKKwlTT0NfREFQTV9QSU5fU1dJVENIKCJCb2FyZCBTcGVha2Vy IiksCisJU09DX0RBUE1fUElOX1NXSVRDSCgiQm9hcmQgTWljIDEiKSwKKwlTT0NfREFQTV9QSU5f U1dJVENIKCJCb2FyZCBNaWMgMyIpLAorfTsKKworc3RhdGljIGludCBzYWFyYl9pMnNfaHdfcGFy YW1zKHN0cnVjdCBzbmRfcGNtX3N1YnN0cmVhbSAqc3Vic3RyZWFtLAorCQkJCXN0cnVjdCBzbmRf cGNtX2h3X3BhcmFtcyAqcGFyYW1zKQoreworCXN0cnVjdCBzbmRfc29jX3BjbV9ydW50aW1lICpy dGQgPSBzdWJzdHJlYW0tPnByaXZhdGVfZGF0YTsKKwlzdHJ1Y3Qgc25kX3NvY19kYWkgKmNvZGVj X2RhaSA9IHJ0ZC0+Y29kZWNfZGFpOworCXN0cnVjdCBzbmRfc29jX2RhaSAqY3B1X2RhaSA9IHJ0 ZC0+Y3B1X2RhaTsKKwlpbnQgd2lkdGggPSBzbmRfcGNtX2Zvcm1hdF9waHlzaWNhbF93aWR0aChw YXJhbXNfZm9ybWF0KHBhcmFtcykpOworCWludCByZXQ7CisKKwlyZXQgPSBzbmRfc29jX2RhaV9z ZXRfc3lzY2xrKGNwdV9kYWksIFBYQV9TU1BfQ0xLX05FVF9QTEwsIDAsCisJCQkJICAgICBQTTg2 MFhfQ0xLX0RJUl9PVVQpOworCWlmIChyZXQgPCAwKQorCQlyZXR1cm4gcmV0OworCisJcmV0ID0g c25kX3NvY19kYWlfc2V0X3N5c2Nsayhjb2RlY19kYWksIDAsIDAsIFBNODYwWF9DTEtfRElSX09V VCk7CisJaWYgKHJldCA8IDApCisJCXJldHVybiByZXQ7CisKKwlyZXQgPSBzbmRfc29jX2RhaV9z ZXRfZm10KGNwdV9kYWksIFNORF9TT0NfREFJRk1UX0kyUyB8CisJCQlTTkRfU09DX0RBSUZNVF9O Ql9ORiB8IFNORF9TT0NfREFJRk1UX0NCTV9DRk0pOworCWlmIChyZXQgPCAwKQorCQlyZXR1cm4g cmV0OworCXJldCA9IHNuZF9zb2NfZGFpX3NldF9mbXQoY29kZWNfZGFpLCBTTkRfU09DX0RBSUZN VF9JMlMgfAorCQkJU05EX1NPQ19EQUlGTVRfTkJfTkYgfCBTTkRfU09DX0RBSUZNVF9DQk1fQ0ZN KTsKKwlpZiAocmV0IDwgMCkKKwkJcmV0dXJuIHJldDsKKworCXJldCA9IHNuZF9zb2NfZGFpX3Nl dF90ZG1fc2xvdChjcHVfZGFpLCAzLCAzLCAyLCB3aWR0aCk7CisKKwlyZXR1cm4gcmV0OworfQor CitzdGF0aWMgc3RydWN0IHNuZF9zb2Nfb3BzIHNhYXJiX2kyc19vcHMgPSB7CisJLmh3X3BhcmFt cwk9IHNhYXJiX2kyc19od19wYXJhbXMsCit9OworCitzdGF0aWMgc3RydWN0IHNuZF9zb2NfZGFp X2xpbmsgc2FhcmJfZGFpW10gPSB7CisJeworCQkubmFtZQkJPSAiODhQTTg2MHggSTJTIiwKKwkJ LnN0cmVhbV9uYW1lCT0gIkkyUyBBdWRpbyIsCisJCS5jcHVfZGFpX25hbWUJPSAicHhhLXNzcC1k YWkuMSIsCisJCS5jb2RlY19kYWlfbmFtZQk9ICI4OHBtODYweC1pMnMiLAorCQkucGxhdGZvcm1f bmFtZQk9ICJweGEtcGNtLWF1ZGlvIiwKKwkJLmNvZGVjX25hbWUJPSAiODhwbTg2MHgtY29kZWMi LAorCQkuaW5pdAkJPSBzYWFyYl9wbTg2MHhfaW5pdCwKKwkJLm9wcwkJPSAmc2FhcmJfaTJzX29w cywKKwl9LAorfTsKKworc3RhdGljIHN0cnVjdCBzbmRfc29jX2NhcmQgc25kX3NvY19jYXJkX3Nh YXJiID0geworCS5uYW1lID0gIlNhYXJiIiwKKwkuZGFpX2xpbmsgPSBzYWFyYl9kYWksCisJLm51 bV9saW5rcyA9IEFSUkFZX1NJWkUoc2FhcmJfZGFpKSwKK307CisKK3N0YXRpYyBpbnQgc2FhcmJf cG04NjB4X2luaXQoc3RydWN0IHNuZF9zb2NfcGNtX3J1bnRpbWUgKnJ0ZCkKK3sKKwlzdHJ1Y3Qg c25kX3NvY19jb2RlYyAqY29kZWMgPSBydGQtPmNvZGVjOworCWludCByZXQ7CisKKwlyZXQgPSBz bmRfc29jX2FkZF9jb250cm9scyhjb2RlYywgcG04NjB4X3NhYXJiX2NvbnRyb2xzLAorCQkJCSAg IEFSUkFZX1NJWkUocG04NjB4X3NhYXJiX2NvbnRyb2xzKSk7CisJaWYgKHJldCA8IDApCisJCXJl dHVybiByZXQ7CisKKwlzbmRfc29jX2RhcG1fbmV3X2NvbnRyb2xzKGNvZGVjLCBzYWFyYl9kYXBt X3dpZGdldHMsCisJCQkJICBBUlJBWV9TSVpFKHNhYXJiX2RhcG1fd2lkZ2V0cykpOworCXNuZF9z b2NfZGFwbV9hZGRfcm91dGVzKGNvZGVjLCBhdWRpb19tYXAsIEFSUkFZX1NJWkUoYXVkaW9fbWFw KSk7CisKKwlzbmRfc29jX2RhcG1fZGlzYWJsZV9waW4oY29kZWMsICJCb2FyZCBTcGVha2VyIik7 CisJc25kX3NvY19kYXBtX2Rpc2FibGVfcGluKGNvZGVjLCAiQm9hcmQgTWljIDEiKTsKKwlzbmRf c29jX2RhcG1fZGlzYWJsZV9waW4oY29kZWMsICJCb2FyZCBNaWMgMyIpOworCXNuZF9zb2NfZGFw bV9lbmFibGVfcGluKGNvZGVjLCAiSGVhZHNldCBNaWMiKTsKKworCXJldHVybiBzbmRfc29jX2Rh cG1fc3luYyhjb2RlYyk7Cit9CisKK3N0YXRpYyBpbnQgX19pbml0IHNhYXJiX2luaXQodm9pZCkK K3sKKwlpbnQgcmV0OworCisJaWYgKCFtYWNoaW5lX2lzX3NhYXJiKCkpCisJCXJldHVybiAtRU5P REVWOworCXNhYXJiX3NuZF9kZXZpY2UgPSBwbGF0Zm9ybV9kZXZpY2VfYWxsb2MoInNvYy1hdWRp byIsIC0xKTsKKwlpZiAoIXNhYXJiX3NuZF9kZXZpY2UpCisJCXJldHVybiAtRU5PTUVNOworCisJ cGxhdGZvcm1fc2V0X2RydmRhdGEoc2FhcmJfc25kX2RldmljZSwgJnNuZF9zb2NfY2FyZF9zYWFy Yik7CisKKwlyZXQgPSBwbGF0Zm9ybV9kZXZpY2VfYWRkKHNhYXJiX3NuZF9kZXZpY2UpOworCWlm IChyZXQpCisJCXBsYXRmb3JtX2RldmljZV9wdXQoc2FhcmJfc25kX2RldmljZSk7CisKKwlyZXR1 cm4gcmV0OworfQorCitzdGF0aWMgdm9pZCBfX2V4aXQgc2FhcmJfZXhpdCh2b2lkKQoreworCXBs YXRmb3JtX2RldmljZV91bnJlZ2lzdGVyKHNhYXJiX3NuZF9kZXZpY2UpOworfQorCittb2R1bGVf aW5pdChzYWFyYl9pbml0KTsKK21vZHVsZV9leGl0KHNhYXJiX2V4aXQpOworCitNT0RVTEVfQVVU SE9SKCJIYW9qaWFuIFpodWFuZyA8aGFvamlhbi56aHVhbmdAbWFydmVsbC5jb20+Iik7CitNT0RV TEVfREVTQ1JJUFRJT04oIkFMU0EgU29DIDg4UE04NjB4IFNhYXJiIik7CitNT0RVTEVfTElDRU5T RSgiR1BMIik7Ci0tIAoxLjUuNi41Cgo= --0016e65aeed62e9cc9048e002c76--

1 0

[PATCH 3/3] ASoC: add saarb machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

88PM860x codec is used in Marvell saarb development board. 88PM860x codec is used as master mode for SSP communication. Only I2S format is supported. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/saarb.c | 192 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 203 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/saarb.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 04ddc7b..37f191b 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -117,6 +117,15 @@ config SND_PXA2XX_SOC_PALM27X Say Y if you want to add support for SoC audio on Palm T|X, T5, E2 or LifeDrive handheld computer. +config SND_SOC_SAARB + tristate "SoC Audio support for Marvell Saarb" + depends on SND_PXA2XX_SOC && MACH_SAARB + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + config SND_SOC_TAVOREVB3 tristate "SoC Audio support for Marvell Tavor EVB3" depends on SND_PXA2XX_SOC && MACH_TAVOREVB3 diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 315941f..0766016 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -19,6 +19,7 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-saarb-objs := saarb.o snd-soc-tavorevb3-objs := tavorevb3.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o @@ -39,6 +40,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o +obj-$(CONFIG_SND_SOC_SAARB) += snd-soc-saarb.o obj-$(CONFIG_SND_SOC_TAVOREVB3) += snd-soc-tavorevb3.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o diff --git a/sound/soc/pxa/saarb.c b/sound/soc/pxa/saarb.c new file mode 100644 index 0000000..b347b54 --- /dev/null +++ b/sound/soc/pxa/saarb.c @@ -0,0 +1,192 @@ +/* + * saarb.c -- SoC audio for saarb + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "pxa-ssp.h" + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *saarb_snd_device; + +static struct snd_soc_jack hs_jack; + +static struct snd_soc_jack_pin hs_jack_pins[] = { + { .pin = "Headset Stereophone", .mask = SND_JACK_HEADPHONE, }, + { .pin = "Headset Mic 2", .mask = SND_JACK_MICROPHONE, }, +}; + +/* saarb machine dapm widgets */ +static const struct snd_soc_dapm_widget saarb_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Stereophone", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Ext Speaker", NULL), + SND_SOC_DAPM_MIC("Ext Mic 1", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Ext Mic 3", NULL), +}; + +/* saarb machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headset Stereophone", NULL, "HS1"}, + {"Headset Stereophone", NULL, "HS2"}, + + {"Ext Speaker", NULL, "LSP"}, + {"Ext Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Ext Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Headset Mic 2"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Ext Mic 3"}, +}; + +static int saarb_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + + return ret; +} + +static struct snd_soc_ops saarb_i2s_ops = { + .hw_params = saarb_i2s_hw_params, +}; + +static struct snd_soc_dai_link saarb_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = saarb_pm860x_init, + .ops = &saarb_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_saarb = { + .name = "Saarb", + .dai_link = saarb_dai, + .num_links = ARRAY_SIZE(saarb_dai), +}; + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + snd_soc_dapm_new_controls(codec, saarb_dapm_widgets, + ARRAY_SIZE(saarb_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* connected pins */ + snd_soc_dapm_enable_pin(codec, "Ext Speaker"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 1"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 3"); + snd_soc_dapm_disable_pin(codec, "Headset Mic 2"); + snd_soc_dapm_disable_pin(codec, "Headset Stereophone"); + + ret = snd_soc_dapm_sync(codec); + if (ret) + return ret; + + /* Headset jack detection */ + snd_soc_jack_new(codec, "Headset Jack", SND_JACK_HEADSET + | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2, + &hs_jack); + snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), + hs_jack_pins); + /* headphone, microphone detection & headset short detection */ + pm860x_hs_jack_detect(codec, &hs_jack, SND_JACK_HEADSET, + SND_JACK_BTN_0); + pm860x_hook_detect(codec, &hs_jack, SND_JACK_BTN_1, SND_JACK_BTN_2); + return 0; +} + +static int __init saarb_init(void) +{ + int ret; + + if (!machine_is_saarb()) + return -ENODEV; + saarb_snd_device = platform_device_alloc("soc-audio", -1); + if (!saarb_snd_device) + return -ENOMEM; + + platform_set_drvdata(saarb_snd_device, &snd_soc_card_saarb); + + ret = platform_device_add(saarb_snd_device); + if (ret) + platform_device_put(saarb_snd_device); + + return ret; +} + +static void __exit saarb_exit(void) +{ + platform_device_unregister(saarb_snd_device); +} + +module_init(saarb_init); +module_exit(saarb_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Saarb"); +MODULE_LICENSE("GPL"); -- 1.5.6.5

1 0

[PATCH 3/3] ASoC: add saarb machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

88PM860x codec is used in Marvell saarb development board. 88PM860x codec is used as master mode for SSP communication. Only I2S format is supported. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/saarb.c | 192 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 203 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/saarb.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 04ddc7b..37f191b 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -117,6 +117,15 @@ config SND_PXA2XX_SOC_PALM27X Say Y if you want to add support for SoC audio on Palm T|X, T5, E2 or LifeDrive handheld computer. +config SND_SOC_SAARB + tristate "SoC Audio support for Marvell Saarb" + depends on SND_PXA2XX_SOC && MACH_SAARB + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + config SND_SOC_TAVOREVB3 tristate "SoC Audio support for Marvell Tavor EVB3" depends on SND_PXA2XX_SOC && MACH_TAVOREVB3 diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 315941f..0766016 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -19,6 +19,7 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-saarb-objs := saarb.o snd-soc-tavorevb3-objs := tavorevb3.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o @@ -39,6 +40,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o +obj-$(CONFIG_SND_SOC_SAARB) += snd-soc-saarb.o obj-$(CONFIG_SND_SOC_TAVOREVB3) += snd-soc-tavorevb3.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o diff --git a/sound/soc/pxa/saarb.c b/sound/soc/pxa/saarb.c new file mode 100644 index 0000000..b347b54 --- /dev/null +++ b/sound/soc/pxa/saarb.c @@ -0,0 +1,192 @@ +/* + * saarb.c -- SoC audio for saarb + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "pxa-ssp.h" + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *saarb_snd_device; + +static struct snd_soc_jack hs_jack; + +static struct snd_soc_jack_pin hs_jack_pins[] = { + { .pin = "Headset Stereophone", .mask = SND_JACK_HEADPHONE, }, + { .pin = "Headset Mic 2", .mask = SND_JACK_MICROPHONE, }, +}; + +/* saarb machine dapm widgets */ +static const struct snd_soc_dapm_widget saarb_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Stereophone", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Ext Speaker", NULL), + SND_SOC_DAPM_MIC("Ext Mic 1", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Ext Mic 3", NULL), +}; + +/* saarb machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headset Stereophone", NULL, "HS1"}, + {"Headset Stereophone", NULL, "HS2"}, + + {"Ext Speaker", NULL, "LSP"}, + {"Ext Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Ext Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Headset Mic 2"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Ext Mic 3"}, +}; + +static int saarb_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + + return ret; +} + +static struct snd_soc_ops saarb_i2s_ops = { + .hw_params = saarb_i2s_hw_params, +}; + +static struct snd_soc_dai_link saarb_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = saarb_pm860x_init, + .ops = &saarb_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_saarb = { + .name = "Saarb", + .dai_link = saarb_dai, + .num_links = ARRAY_SIZE(saarb_dai), +}; + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + snd_soc_dapm_new_controls(codec, saarb_dapm_widgets, + ARRAY_SIZE(saarb_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* connected pins */ + snd_soc_dapm_enable_pin(codec, "Ext Speaker"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 1"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 3"); + snd_soc_dapm_disable_pin(codec, "Headset Mic 2"); + snd_soc_dapm_disable_pin(codec, "Headset Stereophone"); + + ret = snd_soc_dapm_sync(codec); + if (ret) + return ret; + + /* Headset jack detection */ + snd_soc_jack_new(codec, "Headset Jack", SND_JACK_HEADSET + | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2, + &hs_jack); + snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), + hs_jack_pins); + /* headphone, microphone detection & headset short detection */ + pm860x_hs_jack_detect(codec, &hs_jack, SND_JACK_HEADSET, + SND_JACK_BTN_0); + pm860x_hook_detect(codec, &hs_jack, SND_JACK_BTN_1, SND_JACK_BTN_2); + return 0; +} + +static int __init saarb_init(void) +{ + int ret; + + if (!machine_is_saarb()) + return -ENODEV; + saarb_snd_device = platform_device_alloc("soc-audio", -1); + if (!saarb_snd_device) + return -ENOMEM; + + platform_set_drvdata(saarb_snd_device, &snd_soc_card_saarb); + + ret = platform_device_add(saarb_snd_device); + if (ret) + platform_device_put(saarb_snd_device); + + return ret; +} + +static void __exit saarb_exit(void) +{ + platform_device_unregister(saarb_snd_device); +} + +module_init(saarb_init); +module_exit(saarb_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Saarb"); +MODULE_LICENSE("GPL"); -- 1.5.6.5

1 0

[PATCH 3/3] ASoC: add saarb machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

88PM860x codec is used in Marvell saarb development board. 88PM860x codec is used as master mode for SSP communication. Only I2S format is supported. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/saarb.c | 200 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 211 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/saarb.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 04ddc7b..37f191b 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -117,6 +117,15 @@ config SND_PXA2XX_SOC_PALM27X Say Y if you want to add support for SoC audio on Palm T|X, T5, E2 or LifeDrive handheld computer. +config SND_SOC_SAARB + tristate "SoC Audio support for Marvell Saarb" + depends on SND_PXA2XX_SOC && MACH_SAARB + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + config SND_SOC_TAVOREVB3 tristate "SoC Audio support for Marvell Tavor EVB3" depends on SND_PXA2XX_SOC && MACH_TAVOREVB3 diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 315941f..0766016 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -19,6 +19,7 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-saarb-objs := saarb.o snd-soc-tavorevb3-objs := tavorevb3.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o @@ -39,6 +40,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o +obj-$(CONFIG_SND_SOC_SAARB) += snd-soc-saarb.o obj-$(CONFIG_SND_SOC_TAVOREVB3) += snd-soc-tavorevb3.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o diff --git a/sound/soc/pxa/saarb.c b/sound/soc/pxa/saarb.c new file mode 100644 index 0000000..d63cb47 --- /dev/null +++ b/sound/soc/pxa/saarb.c @@ -0,0 +1,200 @@ +/* + * saarb.c -- SoC audio for saarb + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "pxa-ssp.h" + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *saarb_snd_device; + +static struct snd_soc_jack hs_jack, mic_jack; + +static struct snd_soc_jack_pin hs_jack_pins[] = { + { .pin = "Headset Stereophone", .mask = SND_JACK_HEADPHONE, }, +}; + +static struct snd_soc_jack_pin mic_jack_pins[] = { + { .pin = "Headset Mic 2", .mask = SND_JACK_MICROPHONE, }, +}; + +/* saarb machine dapm widgets */ +static const struct snd_soc_dapm_widget saarb_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Stereophone", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Ext Speaker", NULL), + SND_SOC_DAPM_MIC("Ext Mic 1", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Ext Mic 3", NULL), +}; + +/* saarb machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headset Stereophone", NULL, "HS1"}, + {"Headset Stereophone", NULL, "HS2"}, + + {"Ext Speaker", NULL, "LSP"}, + {"Ext Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Ext Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Headset Mic 2"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Ext Mic 3"}, +}; + +static int saarb_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + + return ret; +} + +static struct snd_soc_ops saarb_i2s_ops = { + .hw_params = saarb_i2s_hw_params, +}; + +static struct snd_soc_dai_link saarb_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = saarb_pm860x_init, + .ops = &saarb_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_saarb = { + .name = "Saarb", + .dai_link = saarb_dai, + .num_links = ARRAY_SIZE(saarb_dai), +}; + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + snd_soc_dapm_new_controls(codec, saarb_dapm_widgets, + ARRAY_SIZE(saarb_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* connected pins */ + snd_soc_dapm_enable_pin(codec, "Ext Speaker"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 1"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 3"); + snd_soc_dapm_disable_pin(codec, "Headset Mic 2"); + snd_soc_dapm_disable_pin(codec, "Headset Stereophone"); + + ret = snd_soc_dapm_sync(codec); + if (ret) + return ret; + + /* Headset jack detection */ + snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE + | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2, + &hs_jack); + snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), + hs_jack_pins); + snd_soc_jack_new(codec, "Microphone Jack", SND_JACK_MICROPHONE, + &mic_jack); + snd_soc_jack_add_pins(&mic_jack, ARRAY_SIZE(mic_jack_pins), + mic_jack_pins); + + /* headphone, microphone detection & headset short detection */ + pm860x_hs_jack_detect(codec, &hs_jack, SND_JACK_HEADPHONE, + SND_JACK_BTN_0, SND_JACK_BTN_1, SND_JACK_BTN_2); + pm860x_mic_jack_detect(codec, &hs_jack, SND_JACK_MICROPHONE); + return 0; +} + +static int __init saarb_init(void) +{ + int ret; + + if (!machine_is_saarb()) + return -ENODEV; + saarb_snd_device = platform_device_alloc("soc-audio", -1); + if (!saarb_snd_device) + return -ENOMEM; + + platform_set_drvdata(saarb_snd_device, &snd_soc_card_saarb); + + ret = platform_device_add(saarb_snd_device); + if (ret) + platform_device_put(saarb_snd_device); + + return ret; +} + +static void __exit saarb_exit(void) +{ + platform_device_unregister(saarb_snd_device); +} + +module_init(saarb_init); +module_exit(saarb_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Saarb"); +MODULE_LICENSE("GPL"); -- 1.5.6.5

1 0

[PATCH 2/3] ASoC: add tavorevb3 machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

88PM860x codec is used in Marvell tavorevb3 development board. 88PM860x codec is used as master mode of SSP communication. Only I2S format is supported. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/tavorevb3.c | 180 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 191 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/tavorevb3.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index e30c832..04ddc7b 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -117,6 +117,15 @@ config SND_PXA2XX_SOC_PALM27X Say Y if you want to add support for SoC audio on Palm T|X, T5, E2 or LifeDrive handheld computer. +config SND_SOC_TAVOREVB3 + tristate "SoC Audio support for Marvell Tavor EVB3" + depends on SND_PXA2XX_SOC && MACH_TAVOREVB3 + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + config SND_SOC_ZYLONITE tristate "SoC Audio support for Marvell Zylonite" depends on SND_PXA2XX_SOC && MACH_ZYLONITE diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index caa03d8..315941f 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -19,6 +19,7 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-tavorevb3-objs := tavorevb3.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o snd-soc-mioa701-objs := mioa701_wm9713.o @@ -38,6 +39,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o +obj-$(CONFIG_SND_SOC_TAVOREVB3) += snd-soc-tavorevb3.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o obj-$(CONFIG_SND_SOC_RAUMFELD) += snd-soc-raumfeld.o diff --git a/sound/soc/pxa/tavorevb3.c b/sound/soc/pxa/tavorevb3.c new file mode 100644 index 0000000..194f81a --- /dev/null +++ b/sound/soc/pxa/tavorevb3.c @@ -0,0 +1,180 @@ +/* + * tavorevb3.c -- SoC audio for Tavor EVB3 + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "pxa-ssp.h" + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *evb3_snd_device; + +/* tavorevb3 machine dapm widgets */ +static const struct snd_soc_dapm_widget evb3_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Board Speaker", NULL), + SND_SOC_DAPM_MIC("Board Mic 1", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Board Mic 3", NULL), +}; + +/* tavorevb3 machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone", NULL, "HS1"}, + {"Headphone", NULL, "HS2"}, + + {"Board Speaker", NULL, "LSP"}, + {"Board Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Board Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Headset Mic"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Board Mic 3"}, +}; + +static const struct snd_kcontrol_new pm860x_evb3_controls[] = { + SOC_DAPM_PIN_SWITCH("Board Speaker"), + SOC_DAPM_PIN_SWITCH("Board Mic 1"), + SOC_DAPM_PIN_SWITCH("Board Mic 3"), +}; + +static int evb3_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + return ret; +} + +static struct snd_soc_ops evb3_i2s_ops = { + .hw_params = evb3_i2s_hw_params, +}; + +static struct snd_soc_dai_link evb3_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = evb3_pm860x_init, + .ops = &evb3_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_evb3 = { + .name = "Tavor EVB3", + .dai_link = evb3_dai, + .num_links = ARRAY_SIZE(evb3_dai), +}; + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + ret = snd_soc_add_controls(codec, pm860x_evb3_controls, + ARRAY_SIZE(pm860x_evb3_controls)); + if (ret < 0) + return ret; + + snd_soc_dapm_new_controls(codec, evb3_dapm_widgets, + ARRAY_SIZE(evb3_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_disable_pin(codec, "Board Speaker"); + snd_soc_dapm_disable_pin(codec, "Board Mic 1"); + snd_soc_dapm_disable_pin(codec, "Board Mic 3"); + snd_soc_dapm_enable_pin(codec, "Headset Mic"); + + return snd_soc_dapm_sync(codec); +} + +static int __init tavorevb3_init(void) +{ + int ret; + + if (!machine_is_tavorevb3()) + return -ENODEV; + evb3_snd_device = platform_device_alloc("soc-audio", -1); + if (!evb3_snd_device) + return -ENOMEM; + + platform_set_drvdata(evb3_snd_device, &snd_soc_card_evb3); + + ret = platform_device_add(evb3_snd_device); + if (ret) + platform_device_put(evb3_snd_device); + + return ret; +} + +static void __exit tavorevb3_exit(void) +{ + platform_device_unregister(evb3_snd_device); +} + +module_init(tavorevb3_init); +module_exit(tavorevb3_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Tavor EVB3"); +MODULE_LICENSE("GPL"); + -- 1.5.6.5 --0016367fb40d98bb3a048e002bbe Content-Type: text/x-patch; charset=US-ASCII; name="0002-ASoC-add-tavorevb3-machine-driver-for-88pm860x.patch" Content-Disposition: attachment; filename="0002-ASoC-add-tavorevb3-machine-driver-for-88pm860x.patch" Content-Transfer-Encoding: base64 X-Attachment-Id: f_gcyfzdf50 RnJvbSBhNmM2MGY0YTU2YjgyYjMwMmE4NWJjN2YyZmM5NzgyZTRkODEwNTY4IE1vbiBTZXAgMTcg MDA6MDA6MDAgMjAwMQpGcm9tOiBIYW9qaWFuIFpodWFuZyA8aGFvamlhbi56aHVhbmdAbWFydmVs bC5jb20+CkRhdGU6IFR1ZSwgMTcgQXVnIDIwMTAgMTM6MjQ6MzUgKzA4MDAKU3ViamVjdDogW1BB VENIIDIvM10gQVNvQzogYWRkIHRhdm9yZXZiMyBtYWNoaW5lIGRyaXZlciBmb3IgODhwbTg2MHgK Cjg4UE04NjB4IGNvZGVjIGlzIHVzZWQgaW4gTWFydmVsbCB0YXZvcmV2YjMgZGV2ZWxvcG1lbnQg Ym9hcmQuIDg4UE04NjB4CmNvZGVjIGlzIHVzZWQgYXMgbWFzdGVyIG1vZGUgb2YgU1NQIGNvbW11 bmljYXRpb24uIE9ubHkgSTJTIGZvcm1hdCBpcwpzdXBwb3J0ZWQuCgpTaWduZWQtb2ZmLWJ5OiBI YW9qaWFuIFpodWFuZyA8aGFvamlhbi56aHVhbmdAbWFydmVsbC5jb20+Ci0tLQogc291bmQvc29j L3B4YS9LY29uZmlnICAgICB8ICAgIDkgKysKIHNvdW5kL3NvYy9weGEvTWFrZWZpbGUgICAgfCAg ICAyICsKIHNvdW5kL3NvYy9weGEvdGF2b3JldmIzLmMgfCAgMTgwICsrKysrKysrKysrKysrKysr KysrKysrKysrKysrKysrKysrKysrKysrKysrKwogMyBmaWxlcyBjaGFuZ2VkLCAxOTEgaW5zZXJ0 aW9ucygrKSwgMCBkZWxldGlvbnMoLSkKIGNyZWF0ZSBtb2RlIDEwMDY0NCBzb3VuZC9zb2MvcHhh L3Rhdm9yZXZiMy5jCgpkaWZmIC0tZ2l0IGEvc291bmQvc29jL3B4YS9LY29uZmlnIGIvc291bmQv c29jL3B4YS9LY29uZmlnCmluZGV4IGUzMGM4MzIuLjA0ZGRjN2IgMTAwNjQ0Ci0tLSBhL3NvdW5k L3NvYy9weGEvS2NvbmZpZworKysgYi9zb3VuZC9zb2MvcHhhL0tjb25maWcKQEAgLTExNyw2ICsx MTcsMTUgQEAgY29uZmlnIFNORF9QWEEyWFhfU09DX1BBTE0yN1gKIAkgIFNheSBZIGlmIHlvdSB3 YW50IHRvIGFkZCBzdXBwb3J0IGZvciBTb0MgYXVkaW8gb24KIAkgIFBhbG0gVHxYLCBUNSwgRTIg b3IgTGlmZURyaXZlIGhhbmRoZWxkIGNvbXB1dGVyLgogCitjb25maWcgU05EX1NPQ19UQVZPUkVW QjMKKwl0cmlzdGF0ZSAiU29DIEF1ZGlvIHN1cHBvcnQgZm9yIE1hcnZlbGwgVGF2b3IgRVZCMyIK KwlkZXBlbmRzIG9uIFNORF9QWEEyWFhfU09DICYmIE1BQ0hfVEFWT1JFVkIzCisJc2VsZWN0IFNO RF9QWEFfU09DX1NTUAorCXNlbGVjdCBTTkRfU09DXzg4UE04NjBYCisJaGVscAorCSAgU2F5IFkg aWYgeW91IHdhbnQgdG8gYWRkIHN1cHBvcnQgZm9yIFNvQyBhdWRpbyBvbiB0aGUKKwkgIE1hcnZl bGwgU2FhcmIgcmVmZXJlbmNlIHBsYXRmb3JtLgorCiBjb25maWcgU05EX1NPQ19aWUxPTklURQog CXRyaXN0YXRlICJTb0MgQXVkaW8gc3VwcG9ydCBmb3IgTWFydmVsbCBaeWxvbml0ZSIKIAlkZXBl bmRzIG9uIFNORF9QWEEyWFhfU09DICYmIE1BQ0hfWllMT05JVEUKZGlmZiAtLWdpdCBhL3NvdW5k L3NvYy9weGEvTWFrZWZpbGUgYi9zb3VuZC9zb2MvcHhhL01ha2VmaWxlCmluZGV4IGNhYTAzZDgu LjMxNTk0MWYgMTAwNjQ0Ci0tLSBhL3NvdW5kL3NvYy9weGEvTWFrZWZpbGUKKysrIGIvc291bmQv c29jL3B4YS9NYWtlZmlsZQpAQCAtMTksNiArMTksNyBAQCBzbmQtc29jLWU4MDAtb2JqcyA6PSBl ODAwX3dtOTcxMi5vCiBzbmQtc29jLXNwaXR6LW9ianMgOj0gc3BpdHoubwogc25kLXNvYy1lbS14 MjcwLW9ianMgOj0gZW0teDI3MC5vCiBzbmQtc29jLXBhbG0yN3gtb2JqcyA6PSBwYWxtMjd4Lm8K K3NuZC1zb2MtdGF2b3JldmIzLW9ianMgOj0gdGF2b3JldmIzLm8KIHNuZC1zb2Mtenlsb25pdGUt b2JqcyA6PSB6eWxvbml0ZS5vCiBzbmQtc29jLW1hZ2ljaWFuLW9ianMgOj0gbWFnaWNpYW4ubwog c25kLXNvYy1taW9hNzAxLW9ianMgOj0gbWlvYTcwMV93bTk3MTMubwpAQCAtMzgsNiArMzksNyBA QCBvYmotJChDT05GSUdfU05EX1BYQTJYWF9TT0NfUEFMTTI3WCkgKz0gc25kLXNvYy1wYWxtMjd4 Lm8KIG9iai0kKENPTkZJR19TTkRfUFhBMlhYX1NPQ19NQUdJQ0lBTikgKz0gc25kLXNvYy1tYWdp Y2lhbi5vCiBvYmotJChDT05GSUdfU05EX1BYQTJYWF9TT0NfTUlPQTcwMSkgKz0gc25kLXNvYy1t aW9hNzAxLm8KIG9iai0kKENPTkZJR19TTkRfUFhBMlhYX1NPQ19aMikgKz0gc25kLXNvYy16Mi5v CitvYmotJChDT05GSUdfU05EX1NPQ19UQVZPUkVWQjMpICs9IHNuZC1zb2MtdGF2b3JldmIzLm8K IG9iai0kKENPTkZJR19TTkRfU09DX1pZTE9OSVRFKSArPSBzbmQtc29jLXp5bG9uaXRlLm8KIG9i ai0kKENPTkZJR19TTkRfUFhBMlhYX1NPQ19JTU9URTIpICs9IHNuZC1zb2MtaW1vdGUyLm8KIG9i ai0kKENPTkZJR19TTkRfU09DX1JBVU1GRUxEKSArPSBzbmQtc29jLXJhdW1mZWxkLm8KZGlmZiAt LWdpdCBhL3NvdW5kL3NvYy9weGEvdGF2b3JldmIzLmMgYi9zb3VuZC9zb2MvcHhhL3Rhdm9yZXZi My5jCm5ldyBmaWxlIG1vZGUgMTAwNjQ0CmluZGV4IDAwMDAwMDAuLjE5NGY4MWEKLS0tIC9kZXYv bnVsbAorKysgYi9zb3VuZC9zb2MvcHhhL3Rhdm9yZXZiMy5jCkBAIC0wLDAgKzEsMTgwIEBACisv KgorICogdGF2b3JldmIzLmMgLS0gU29DIGF1ZGlvIGZvciBUYXZvciBFVkIzCisgKgorICogQ29w eXJpZ2h0IChDKSAyMDEwIE1hcnZlbGwgSW50ZXJuYXRpb25hbCBMdGQuCisgKiAJSGFvamlhbiBa aHVhbmcgPGhhb2ppYW4uemh1YW5nQG1hcnZlbGwuY29tPgorICoKKyAqIFRoaXMgcHJvZ3JhbSBp cyBmcmVlIHNvZnR3YXJlOyB5b3UgY2FuIHJlZGlzdHJpYnV0ZSBpdCBhbmQvb3IgbW9kaWZ5Cisg KiBpdCB1bmRlciB0aGUgdGVybXMgb2YgdGhlIEdOVSBHZW5lcmFsIFB1YmxpYyBMaWNlbnNlIHZl cnNpb24gMiBhcworICogcHVibGlzaGVkIGJ5IHRoZSBGcmVlIFNvZnR3YXJlIEZvdW5kYXRpb24u CisgKi8KKworI2luY2x1ZGUgPGxpbnV4L21vZHVsZS5oPgorI2luY2x1ZGUgPGxpbnV4L21vZHVs ZXBhcmFtLmg+CisjaW5jbHVkZSA8bGludXgvZGV2aWNlLmg+CisjaW5jbHVkZSA8bGludXgvY2xr Lmg+CisjaW5jbHVkZSA8bGludXgvaTJjLmg+CisjaW5jbHVkZSA8c291bmQvY29yZS5oPgorI2lu Y2x1ZGUgPHNvdW5kL3BjbS5oPgorI2luY2x1ZGUgPHNvdW5kL3BjbV9wYXJhbXMuaD4KKyNpbmNs dWRlIDxzb3VuZC9zb2MuaD4KKyNpbmNsdWRlIDxzb3VuZC9zb2MtZGFwbS5oPgorCisjaW5jbHVk ZSA8YXNtL21hY2gtdHlwZXMuaD4KKworI2luY2x1ZGUgIi4uL2NvZGVjcy84OHBtODYweC1jb2Rl Yy5oIgorI2luY2x1ZGUgInB4YS1zc3AuaCIKKworc3RhdGljIGludCBldmIzX3BtODYweF9pbml0 KHN0cnVjdCBzbmRfc29jX3BjbV9ydW50aW1lICpydGQpOworCitzdGF0aWMgc3RydWN0IHBsYXRm b3JtX2RldmljZSAqZXZiM19zbmRfZGV2aWNlOworCisvKiB0YXZvcmV2YjMgbWFjaGluZSBkYXBt IHdpZGdldHMgKi8KK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc25kX3NvY19kYXBtX3dpZGdldCBldmIz X2RhcG1fd2lkZ2V0c1tdID0geworCVNORF9TT0NfREFQTV9IUCgiSGVhZHBob25lIiwgTlVMTCks CisJU05EX1NPQ19EQVBNX0xJTkUoIkxpbmVvdXQgT3V0IDEiLCBOVUxMKSwKKwlTTkRfU09DX0RB UE1fTElORSgiTGluZW91dCBPdXQgMiIsIE5VTEwpLAorCVNORF9TT0NfREFQTV9TUEsoIkJvYXJk IFNwZWFrZXIiLCBOVUxMKSwKKwlTTkRfU09DX0RBUE1fTUlDKCJCb2FyZCBNaWMgMSIsIE5VTEwp LAorCVNORF9TT0NfREFQTV9NSUMoIkhlYWRzZXQgTWljIiwgTlVMTCksCisJU05EX1NPQ19EQVBN X01JQygiQm9hcmQgTWljIDMiLCBOVUxMKSwKK307CisKKy8qIHRhdm9yZXZiMyBtYWNoaW5lIGF1 ZGlvIG1hcCAqLworc3RhdGljIGNvbnN0IHN0cnVjdCBzbmRfc29jX2RhcG1fcm91dGUgYXVkaW9f bWFwW10gPSB7CisJeyJIZWFkcGhvbmUiLCBOVUxMLCAiSFMxIn0sCisJeyJIZWFkcGhvbmUiLCBO VUxMLCAiSFMyIn0sCisKKwl7IkJvYXJkIFNwZWFrZXIiLCBOVUxMLCAiTFNQIn0sCisJeyJCb2Fy ZCBTcGVha2VyIiwgTlVMTCwgIkxTTiJ9LAorCisJeyJMaW5lb3V0IE91dCAxIiwgTlVMTCwgIkxJ TkVPVVQxIn0sCisJeyJMaW5lb3V0IE91dCAyIiwgTlVMTCwgIkxJTkVPVVQyIn0sCisKKwl7Ik1J QzFQIiwgTlVMTCwgIk1pYzEgQmlhcyJ9LAorCXsiTUlDMU4iLCBOVUxMLCAiTWljMSBCaWFzIn0s CisJeyJNaWMxIEJpYXMiLCBOVUxMLCAiQm9hcmQgTWljIDEifSwKKworCXsiTUlDMlAiLCBOVUxM LCAiTWljMSBCaWFzIn0sCisJeyJNSUMyTiIsIE5VTEwsICJNaWMxIEJpYXMifSwKKwl7Ik1pYzEg QmlhcyIsIE5VTEwsICJIZWFkc2V0IE1pYyJ9LAorCisJeyJNSUMzUCIsIE5VTEwsICJNaWMzIEJp YXMifSwKKwl7Ik1JQzNOIiwgTlVMTCwgIk1pYzMgQmlhcyJ9LAorCXsiTWljMyBCaWFzIiwgTlVM TCwgIkJvYXJkIE1pYyAzIn0sCit9OworCitzdGF0aWMgY29uc3Qgc3RydWN0IHNuZF9rY29udHJv bF9uZXcgcG04NjB4X2V2YjNfY29udHJvbHNbXSA9IHsKKwlTT0NfREFQTV9QSU5fU1dJVENIKCJC b2FyZCBTcGVha2VyIiksCisJU09DX0RBUE1fUElOX1NXSVRDSCgiQm9hcmQgTWljIDEiKSwKKwlT T0NfREFQTV9QSU5fU1dJVENIKCJCb2FyZCBNaWMgMyIpLAorfTsKKworc3RhdGljIGludCBldmIz X2kyc19od19wYXJhbXMoc3RydWN0IHNuZF9wY21fc3Vic3RyZWFtICpzdWJzdHJlYW0sCisJCQkg ICAgICBzdHJ1Y3Qgc25kX3BjbV9od19wYXJhbXMgKnBhcmFtcykKK3sKKwlzdHJ1Y3Qgc25kX3Nv Y19wY21fcnVudGltZSAqcnRkID0gc3Vic3RyZWFtLT5wcml2YXRlX2RhdGE7CisJc3RydWN0IHNu ZF9zb2NfZGFpICpjb2RlY19kYWkgPSBydGQtPmNvZGVjX2RhaTsKKwlzdHJ1Y3Qgc25kX3NvY19k YWkgKmNwdV9kYWkgPSBydGQtPmNwdV9kYWk7CisJaW50IHdpZHRoID0gc25kX3BjbV9mb3JtYXRf cGh5c2ljYWxfd2lkdGgocGFyYW1zX2Zvcm1hdChwYXJhbXMpKTsKKwlpbnQgcmV0OworCisJcmV0 ID0gc25kX3NvY19kYWlfc2V0X3N5c2NsayhjcHVfZGFpLCBQWEFfU1NQX0NMS19ORVRfUExMLCAw LAorCQkJCSAgICAgUE04NjBYX0NMS19ESVJfT1VUKTsKKwlpZiAocmV0IDwgMCkKKwkJcmV0dXJu IHJldDsKKworCXJldCA9IHNuZF9zb2NfZGFpX3NldF9zeXNjbGsoY29kZWNfZGFpLCAwLCAwLCBQ TTg2MFhfQ0xLX0RJUl9PVVQpOworCWlmIChyZXQgPCAwKQorCQlyZXR1cm4gcmV0OworCisJcmV0 ID0gc25kX3NvY19kYWlfc2V0X2ZtdChjcHVfZGFpLCBTTkRfU09DX0RBSUZNVF9JMlMgfAorCQkJ U05EX1NPQ19EQUlGTVRfTkJfTkYgfCBTTkRfU09DX0RBSUZNVF9DQk1fQ0ZNKTsKKwlpZiAocmV0 IDwgMCkKKwkJcmV0dXJuIHJldDsKKworCXJldCA9IHNuZF9zb2NfZGFpX3NldF9mbXQoY29kZWNf ZGFpLCBTTkRfU09DX0RBSUZNVF9JMlMgfAorCQkJU05EX1NPQ19EQUlGTVRfTkJfTkYgfCBTTkRf U09DX0RBSUZNVF9DQk1fQ0ZNKTsKKwlpZiAocmV0IDwgMCkKKwkJcmV0dXJuIHJldDsKKworCXJl dCA9IHNuZF9zb2NfZGFpX3NldF90ZG1fc2xvdChjcHVfZGFpLCAzLCAzLCAyLCB3aWR0aCk7CisJ cmV0dXJuIHJldDsKK30KKworc3RhdGljIHN0cnVjdCBzbmRfc29jX29wcyBldmIzX2kyc19vcHMg PSB7CisJLmh3X3BhcmFtcwk9IGV2YjNfaTJzX2h3X3BhcmFtcywKK307CisKK3N0YXRpYyBzdHJ1 Y3Qgc25kX3NvY19kYWlfbGluayBldmIzX2RhaVtdID0geworCXsKKwkJLm5hbWUJCT0gIjg4UE04 NjB4IEkyUyIsCisJCS5zdHJlYW1fbmFtZQk9ICJJMlMgQXVkaW8iLAorCQkuY3B1X2RhaV9uYW1l CT0gInB4YS1zc3AtZGFpLjEiLAorCQkuY29kZWNfZGFpX25hbWUJPSAiODhwbTg2MHgtaTJzIiwK KwkJLnBsYXRmb3JtX25hbWUJPSAicHhhLXBjbS1hdWRpbyIsCisJCS5jb2RlY19uYW1lCT0gIjg4 cG04NjB4LWNvZGVjIiwKKwkJLmluaXQJCT0gZXZiM19wbTg2MHhfaW5pdCwKKwkJLm9wcwkJPSAm ZXZiM19pMnNfb3BzLAorCX0sCit9OworCitzdGF0aWMgc3RydWN0IHNuZF9zb2NfY2FyZCBzbmRf c29jX2NhcmRfZXZiMyA9IHsKKwkubmFtZSA9ICJUYXZvciBFVkIzIiwKKwkuZGFpX2xpbmsgPSBl dmIzX2RhaSwKKwkubnVtX2xpbmtzID0gQVJSQVlfU0laRShldmIzX2RhaSksCit9OworCitzdGF0 aWMgaW50IGV2YjNfcG04NjB4X2luaXQoc3RydWN0IHNuZF9zb2NfcGNtX3J1bnRpbWUgKnJ0ZCkK K3sKKwlzdHJ1Y3Qgc25kX3NvY19jb2RlYyAqY29kZWMgPSBydGQtPmNvZGVjOworCWludCByZXQ7 CisKKwlyZXQgPSBzbmRfc29jX2FkZF9jb250cm9scyhjb2RlYywgcG04NjB4X2V2YjNfY29udHJv bHMsCisJCQkJICAgQVJSQVlfU0laRShwbTg2MHhfZXZiM19jb250cm9scykpOworCWlmIChyZXQg PCAwKQorCQlyZXR1cm4gcmV0OworCisJc25kX3NvY19kYXBtX25ld19jb250cm9scyhjb2RlYywg ZXZiM19kYXBtX3dpZGdldHMsCisJCQkJICBBUlJBWV9TSVpFKGV2YjNfZGFwbV93aWRnZXRzKSk7 CisJc25kX3NvY19kYXBtX2FkZF9yb3V0ZXMoY29kZWMsIGF1ZGlvX21hcCwgQVJSQVlfU0laRShh dWRpb19tYXApKTsKKworCXNuZF9zb2NfZGFwbV9kaXNhYmxlX3Bpbihjb2RlYywgIkJvYXJkIFNw ZWFrZXIiKTsKKwlzbmRfc29jX2RhcG1fZGlzYWJsZV9waW4oY29kZWMsICJCb2FyZCBNaWMgMSIp OworCXNuZF9zb2NfZGFwbV9kaXNhYmxlX3Bpbihjb2RlYywgIkJvYXJkIE1pYyAzIik7CisJc25k X3NvY19kYXBtX2VuYWJsZV9waW4oY29kZWMsICJIZWFkc2V0IE1pYyIpOworCisJcmV0dXJuIHNu ZF9zb2NfZGFwbV9zeW5jKGNvZGVjKTsKK30KKworc3RhdGljIGludCBfX2luaXQgdGF2b3JldmIz X2luaXQodm9pZCkKK3sKKwlpbnQgcmV0OworCisJaWYgKCFtYWNoaW5lX2lzX3Rhdm9yZXZiMygp KQorCQlyZXR1cm4gLUVOT0RFVjsKKwlldmIzX3NuZF9kZXZpY2UgPSBwbGF0Zm9ybV9kZXZpY2Vf YWxsb2MoInNvYy1hdWRpbyIsIC0xKTsKKwlpZiAoIWV2YjNfc25kX2RldmljZSkKKwkJcmV0dXJu IC1FTk9NRU07CisKKwlwbGF0Zm9ybV9zZXRfZHJ2ZGF0YShldmIzX3NuZF9kZXZpY2UsICZzbmRf c29jX2NhcmRfZXZiMyk7CisKKwlyZXQgPSBwbGF0Zm9ybV9kZXZpY2VfYWRkKGV2YjNfc25kX2Rl dmljZSk7CisJaWYgKHJldCkKKwkJcGxhdGZvcm1fZGV2aWNlX3B1dChldmIzX3NuZF9kZXZpY2Up OworCisJcmV0dXJuIHJldDsKK30KKworc3RhdGljIHZvaWQgX19leGl0IHRhdm9yZXZiM19leGl0 KHZvaWQpCit7CisJcGxhdGZvcm1fZGV2aWNlX3VucmVnaXN0ZXIoZXZiM19zbmRfZGV2aWNlKTsK K30KKworbW9kdWxlX2luaXQodGF2b3JldmIzX2luaXQpOworbW9kdWxlX2V4aXQodGF2b3JldmIz X2V4aXQpOworCitNT0RVTEVfQVVUSE9SKCJIYW9qaWFuIFpodWFuZyA8aGFvamlhbi56aHVhbmdA bWFydmVsbC5jb20+Iik7CitNT0RVTEVfREVTQ1JJUFRJT04oIkFMU0EgU29DIDg4UE04NjB4IFRh dm9yIEVWQjMiKTsKK01PRFVMRV9MSUNFTlNFKCJHUEwiKTsKKwotLSAKMS41LjYuNQoK --0016367fb40d98bb3a048e002bbe--

1 0

[PATCH 2/3] ASoC: add tavorevb3 machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

88PM860x codec is used in Marvell tavorevb3 development board. 88PM860x codec is used as master mode of SSP communication. Only I2S format is supported. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/Kconfig | 9 + sound/soc/pxa/Makefile | 2 + sound/soc/pxa/pxa2xx-ssp.c | 532 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/pxa/pxa2xx-ssp.h | 59 +++++ sound/soc/pxa/ssp.c | 298 +++++++++++++++++++++++++ sound/soc/pxa/ssp.h | 42 ++++ sound/soc/pxa/tavorevb3.c | 193 ++++++++++++++++ 7 files changed, 1135 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/pxa2xx-ssp.c create mode 100644 sound/soc/pxa/pxa2xx-ssp.h create mode 100644 sound/soc/pxa/ssp.c create mode 100644 sound/soc/pxa/ssp.h create mode 100644 sound/soc/pxa/tavorevb3.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index e30c832..04ddc7b 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -117,6 +117,15 @@ config SND_PXA2XX_SOC_PALM27X Say Y if you want to add support for SoC audio on Palm T|X, T5, E2 or LifeDrive handheld computer. +config SND_SOC_TAVOREVB3 + tristate "SoC Audio support for Marvell Tavor EVB3" + depends on SND_PXA2XX_SOC && MACH_TAVOREVB3 + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + config SND_SOC_ZYLONITE tristate "SoC Audio support for Marvell Zylonite" depends on SND_PXA2XX_SOC && MACH_ZYLONITE diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index caa03d8..315941f 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -19,6 +19,7 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-tavorevb3-objs := tavorevb3.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o snd-soc-mioa701-objs := mioa701_wm9713.o @@ -38,6 +39,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o +obj-$(CONFIG_SND_SOC_TAVOREVB3) += snd-soc-tavorevb3.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o obj-$(CONFIG_SND_SOC_RAUMFELD) += snd-soc-raumfeld.o diff --git a/sound/soc/pxa/pxa2xx-ssp.c b/sound/soc/pxa/pxa2xx-ssp.c new file mode 100644 index 0000000..5eab055 --- /dev/null +++ b/sound/soc/pxa/pxa2xx-ssp.c @@ -0,0 +1,532 @@ +/* + * pxa2xx-ssp.c -- ALSA Soc Audio Layer + * + * Copyright 2005,2008 Wolfson Microelectronics PLC. + * Author: Liam Girdwood + * Mark Brown <broonie(a)opensource.wolfsonmicro.com> + * + * Copyright 2009-2010 Marvell International Ltd. + * Author: Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * TODO: + * o Test network mode for > 16bit sample size + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/irq.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/initval.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/pxa2xx-lib.h> + +#include <mach/hardware.h> +#include <mach/dma.h> +#include <mach/regs-ssp.h> +#include <mach/audio.h> +#include <plat/ssp.h> + +#include "pxa2xx-pcm.h" +#include "pxa2xx-ssp.h" +#include "ssp.h" + +static void dump_registers(struct ssp_device *ssp) +{ + dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", + ssp_read_reg(ssp, SSCR0), ssp_read_reg(ssp, SSCR1), + ssp_read_reg(ssp, SSTO)); + + dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n", + ssp_read_reg(ssp, SSPSP), ssp_read_reg(ssp, SSSR), + ssp_read_reg(ssp, SSACD)); +} + +/** + * ssp_set_clkdiv - set SSP clock divider + * @div: serial clock rate divider + */ +static void ssp_set_scr(struct ssp_device *ssp, u32 div) +{ + u32 sscr0 = ssp_read_reg(ssp, SSCR0); + + if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) { + sscr0 &= ~0x0000ff00; + sscr0 |= ((div - 2)/2) << 8; /* 2..512 */ + } else { + sscr0 &= ~0x000fff00; + sscr0 |= (div - 1) << 8; /* 1..4096 */ + } + ssp_write_reg(ssp, SSCR0, sscr0); +} + +/** + * ssp_get_clkdiv - get SSP clock divider + */ +static u32 ssp_get_scr(struct ssp_device *ssp) +{ + u32 sscr0 = ssp_read_reg(ssp, SSCR0); + u32 div; + + if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) + div = ((sscr0 >> 8) & 0xff) * 2 + 2; + else + div = ((sscr0 >> 8) & 0xfff) + 1; + return div; +} + +/* + * Set the SSP ports SYSCLK. + */ +static int pxa2xx_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, int clk_id, + unsigned int freq, int dir) +{ + struct ssp_info *info = cpu_dai->private_data; + struct ssp_device *ssp = info->dev.ssp; + int val; + + u32 sscr0 = ssp_read_reg(ssp, SSCR0) & + ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); + + dev_dbg(&ssp->pdev->dev, + "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n", + cpu_dai->id, clk_id, freq); + + switch (clk_id) { + case PXA2XX_SSP_CLK_NET_PLL: + sscr0 |= SSCR0_MOD; + break; + case PXA2XX_SSP_CLK_PLL: + /* Internal PLL is fixed */ + if (cpu_is_pxa25x()) + info->sysclk = 1843200; + else + info->sysclk = 13000000; + break; + case PXA2XX_SSP_CLK_EXT: + info->sysclk = freq; + sscr0 |= SSCR0_ECS; + break; + case PXA2XX_SSP_CLK_NET: + info->sysclk = freq; + sscr0 |= SSCR0_NCS | SSCR0_MOD; + break; + case PXA2XX_SSP_CLK_AUDIO: + info->sysclk = 0; + ssp_set_scr(ssp, 1); + sscr0 |= SSCR0_ACS; + break; + default: + return -ENODEV; + } + + /* The SSP clock must be disabled when changing SSP clock mode + * on PXA2xx. On PXA3xx it must be enabled when doing so. */ + if (!cpu_is_pxa3xx()) + clk_disable(info->dev.ssp->clk); + val = ssp_read_reg(ssp, SSCR0) | sscr0; + ssp_write_reg(ssp, SSCR0, val); + if (!cpu_is_pxa3xx()) + clk_enable(info->dev.ssp->clk); + + return 0; +} + +/* + * Set the SSP clock dividers. + */ +static int pxa2xx_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct ssp_info *info = cpu_dai->private_data; + struct ssp_device *ssp = info->dev.ssp; + int val; + + switch (div_id) { + case PXA2XX_SSP_AUDIO_DIV_ACDS: + val = (ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div); + ssp_write_reg(ssp, SSACD, val); + break; + case PXA2XX_SSP_AUDIO_DIV_SCDB: + val = ssp_read_reg(ssp, SSACD); + val &= ~SSACD_SCDB; + if (cpu_is_pxa3xx()) + val &= ~SSACD_SCDX8; + switch (div) { + case PXA2XX_SSP_CLK_SCDB_1: + val |= SSACD_SCDB; + break; + case PXA2XX_SSP_CLK_SCDB_4: + break; + case PXA2XX_SSP_CLK_SCDB_8: + if (cpu_is_pxa3xx()) + val |= SSACD_SCDX8; + else + return -EINVAL; + break; + default: + return -EINVAL; + } + ssp_write_reg(ssp, SSACD, val); + break; + case PXA2XX_SSP_DIV_SCR: + ssp_set_scr(ssp, div); + break; + default: + return -ENODEV; + } + + return 0; +} + +/* + * Configure the PLL frequency pxa27x and (afaik - pxa320 only) + */ +static int pxa2xx_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, + int source, unsigned int freq_in, + unsigned int freq_out) +{ + struct ssp_info *info = cpu_dai->private_data; + struct ssp_device *ssp = info->dev.ssp; + u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70; + + if (cpu_is_pxa3xx()) + ssp_write_reg(ssp, SSACDD, 0); + + switch (freq_out) { + case 5622000: + break; + case 11345000: + ssacd |= (0x1 << 4); + break; + case 12235000: + ssacd |= (0x2 << 4); + break; + case 14857000: + ssacd |= (0x3 << 4); + break; + case 32842000: + ssacd |= (0x4 << 4); + break; + case 48000000: + ssacd |= (0x5 << 4); + break; + case 0: + /* Disable */ + break; + + default: + /* PXA3xx has a clock ditherer which can be used to generate + * a wider range of frequencies - calculate a value for it. + */ + if (cpu_is_pxa3xx()) { + u32 val; + u64 tmp = 19968; + tmp *= 1000000; + do_div(tmp, freq_out); + val = tmp; + + val = (val << 16) | 64; + ssp_write_reg(ssp, SSACDD, val); + + ssacd |= (0x6 << 4); + + dev_dbg(&ssp->pdev->dev, + "Using SSACDD %x to supply %uHz\n", + val, freq_out); + break; + } + + return -EINVAL; + } + + ssp_write_reg(ssp, SSACD, ssacd); + + return 0; +} + +/* + * Set up the SSP DAI format. + * The SSP Port must be inactive before calling this function as the + * physical interface format is changed. + */ +static int pxa2xx_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct ssp_info *info = cpu_dai->private_data; + struct ssp_device *ssp = info->dev.ssp; + u32 sscr0; + u32 sscr1; + u32 sspsp; + + /* check if we need to change anything at all */ + if (info->dai_fmt == fmt) + return 0; + + /* we can only change the settings if the port is not in use */ + if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { + dev_err(&ssp->pdev->dev, + "can't change hardware dai format: stream is in use"); + return -EINVAL; + } + + /* reset port settings */ + sscr0 = ssp_read_reg(ssp, SSCR0) & + (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); + sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7); + sspsp = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR; + break; + case SND_SOC_DAIFMT_CBM_CFS: + sscr1 |= SSCR1_SCLKDIR; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + sspsp |= SSPSP_SFRMP; + break; + case SND_SOC_DAIFMT_NB_IF: + break; + case SND_SOC_DAIFMT_IB_IF: + sspsp |= SSPSP_SCMODE(2); + break; + case SND_SOC_DAIFMT_IB_NF: + sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + sscr0 |= SSCR0_PSP; + sscr1 |= SSCR1_RWOT | SSCR1_TRAIL; + /* See hw_params() */ + break; + + case SND_SOC_DAIFMT_DSP_A: + sspsp |= SSPSP_FSRT; + case SND_SOC_DAIFMT_DSP_B: + sscr0 |= SSCR0_MOD | SSCR0_PSP; + sscr1 |= SSCR1_TRAIL | SSCR1_RWOT; + break; + + default: + return -EINVAL; + } + + ssp_write_reg(ssp, SSCR0, sscr0); + ssp_write_reg(ssp, SSCR1, sscr1); + ssp_write_reg(ssp, SSPSP, sspsp); + + dump_registers(ssp); + + /* Since we are configuring the timings for the format by hand + * we have to defer some things until hw_params() where we + * know parameters like the sample size. + */ + info->dai_fmt = fmt; + + return 0; +} + +/* + * Set the SSP audio DMA parameters and sample size. + * Can be called multiple times by oss emulation. + */ +static int pxa2xx_ssp_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct ssp_info *info = cpu_dai->private_data; + struct ssp_device *ssp = info->dev.ssp; + int chn = params_channels(params); + u32 sscr0; + u32 sspsp; + int width = snd_pcm_format_physical_width(params_format(params)); + int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf; + + /* generate correct DMA params */ + if (cpu_dai->dma_data) + kfree(cpu_dai->dma_data); + + /* Network mode with one active slot (ttsa == 1) can be used + * to force 16-bit frame width on the wire (for S16_LE), even + * with two channels. Use 16-bit DMA transfers for this case. + */ + cpu_dai->dma_data = pxa_ssp_get_dma_params(ssp, + ((chn == 2) && (ttsa != 1)) || (width == 32), + substream->stream == SNDRV_PCM_STREAM_PLAYBACK); + + /* we can only change the settings if the port is not in use */ + if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) + return 0; + + /* clear selected SSP bits */ + sscr0 = ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); + ssp_write_reg(ssp, SSCR0, sscr0); + + /* bit size */ + sscr0 = ssp_read_reg(ssp, SSCR0); + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + if (cpu_is_pxa3xx()) + sscr0 |= SSCR0_FPCKE; + sscr0 |= SSCR0_DataSize(16); + break; + case SNDRV_PCM_FORMAT_S24_LE: + sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8)); + break; + case SNDRV_PCM_FORMAT_S32_LE: + sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16)); + break; + } + ssp_write_reg(ssp, SSCR0, sscr0); + + switch (info->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + sspsp = ssp_read_reg(ssp, SSPSP); + + if ((ssp_get_scr(ssp) == 4) && (width == 16)) { + /* This is a special case where the bitclk is 64fs + * and we're not dealing with 2*32 bits of audio + * samples. + * + * The SSP values used for that are all found out by + * trying and failing a lot; some of the registers + * needed for that mode are only available on PXA3xx. + */ + + if (!cpu_is_pxa3xx()) + return -EINVAL; + + sspsp |= SSPSP_SFRMWDTH(width * 2); + sspsp |= SSPSP_SFRMDLY(width * 4); + sspsp |= SSPSP_EDMYSTOP(3); + sspsp |= SSPSP_DMYSTOP(3); + sspsp |= SSPSP_DMYSTRT(1); + } else { + /* The frame width is the width the LRCLK is + * asserted for; the delay is expressed in + * half cycle units. We need the extra cycle + * because the data starts clocking out one BCLK + * after LRCLK changes polarity. + */ + sspsp |= SSPSP_SFRMWDTH(width + 1); + sspsp |= SSPSP_SFRMDLY((width + 1) * 2); + sspsp |= SSPSP_DMYSTRT(1); + } + + ssp_write_reg(ssp, SSPSP, sspsp); + break; + default: + break; + } + + /* When we use a network mode, we always require TDM slots + * - complain loudly and fail if they've not been set up yet. + */ + if ((sscr0 & SSCR0_MOD) && !ttsa) { + dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n"); + return -EINVAL; + } + + dump_registers(ssp); + + return 0; +} + +static struct snd_soc_dai_ops pxa2xx_ssp_dai_ops = { + .hw_params = pxa2xx_ssp_hw_params, + .set_sysclk = pxa2xx_ssp_set_dai_sysclk, + .set_clkdiv = pxa2xx_ssp_set_dai_clkdiv, + .set_pll = pxa2xx_ssp_set_dai_pll, + .set_fmt = pxa2xx_ssp_set_dai_fmt, +}; + +struct snd_soc_dai pxa2xx_ssp_dai[PXA2XX_DAI_SSP_MAX]; +EXPORT_SYMBOL(pxa2xx_ssp_dai); + +static int __devinit pxa2xx_ssp_dev_probe(struct platform_device *pdev) +{ + struct snd_soc_dai *dai; + int ret; + + if (pdev->id >= PXA2XX_DAI_SSP_MAX) { + dev_err(&pdev->dev, "id %d is out of range\n", pdev->id); + return -EINVAL; + } + + dai = &pxa2xx_ssp_dai[pdev->id]; + dai->dev = &pdev->dev; + dai->name = "pxa2xx-ssp"; + dai->id = pdev->id; + dai->playback.channels_min = 1; + dai->playback.channels_max = 8; + dai->playback.rates = PXA2XX_SSP_RATES; + dai->playback.formats = PXA2XX_SSP_FORMATS; + dai->capture.channels_min = 1; + dai->capture.channels_max = 8; + dai->capture.rates = PXA2XX_SSP_RATES; + dai->capture.formats = PXA2XX_SSP_FORMATS; + dai->ops = &pxa2xx_ssp_dai_ops; + + ret = pxa_ssp_register_dai(dai); + return ret; +} + +static int __devexit pxa2xx_ssp_dev_remove(struct platform_device *pdev) +{ + struct snd_soc_dai *dai; + + dai = &pxa2xx_ssp_dai[pdev->id]; + snd_soc_unregister_dai(dai); + return 0; +} + +static struct platform_driver pxa2xx_ssp_driver = { + .probe = pxa2xx_ssp_dev_probe, + .remove = __devexit_p(pxa2xx_ssp_dev_remove), + .driver = { + .name = "pxa2xx-ssp", + .owner = THIS_MODULE, + }, +}; + +static int __init pxa2xx_ssp_init(void) +{ + return platform_driver_register(&pxa2xx_ssp_driver); +} +module_init(pxa2xx_ssp_init); + +static void __exit pxa2xx_ssp_exit(void) +{ + platform_driver_unregister(&pxa2xx_ssp_driver); +} +module_exit(pxa2xx_ssp_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie(a)opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/pxa/pxa2xx-ssp.h b/sound/soc/pxa/pxa2xx-ssp.h new file mode 100644 index 0000000..2455bf4 --- /dev/null +++ b/sound/soc/pxa/pxa2xx-ssp.h @@ -0,0 +1,59 @@ +/* + * ASoC PXA SSP port support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PXA2XX_SOC_SSP_H +#define __PXA2XX_SOC_SSP_H + +#define PXA2XX_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +#define PXA2XX_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* pxa DAI SSP IDs */ +enum { + PXA2XX_DAI_SSP1, + PXA2XX_DAI_SSP2, + PXA2XX_DAI_SSP3, + PXA2XX_DAI_SSP4, + PXA2XX_DAI_SSP_MAX, +}; + +/* SSP clock sources */ +#define PXA2XX_SSP_CLK_PLL 0 +#define PXA2XX_SSP_CLK_EXT 1 +#define PXA2XX_SSP_CLK_NET 2 +#define PXA2XX_SSP_CLK_AUDIO 3 +#define PXA2XX_SSP_CLK_NET_PLL 4 + +/* SSP audio dividers */ +#define PXA2XX_SSP_AUDIO_DIV_ACDS 0 +#define PXA2XX_SSP_AUDIO_DIV_SCDB 1 +#define PXA2XX_SSP_DIV_SCR 2 + +/* SSP ACDS audio dividers values */ +#define PXA2XX_SSP_CLK_AUDIO_DIV_1 0 +#define PXA2XX_SSP_CLK_AUDIO_DIV_2 1 +#define PXA2XX_SSP_CLK_AUDIO_DIV_4 2 +#define PXA2XX_SSP_CLK_AUDIO_DIV_8 3 +#define PXA2XX_SSP_CLK_AUDIO_DIV_16 4 +#define PXA2XX_SSP_CLK_AUDIO_DIV_32 5 + +/* SSP divider bypass */ +#define PXA2XX_SSP_CLK_SCDB_4 0 +#define PXA2XX_SSP_CLK_SCDB_1 1 +#define PXA2XX_SSP_CLK_SCDB_8 2 + +#define PXA2XX_SSP_PLL_OUT 0 + +extern struct snd_soc_dai pxa2xx_ssp_dai[PXA2XX_DAI_SSP_MAX]; + +#endif /* __PXA2XX_SOC_SSP_H */ diff --git a/sound/soc/pxa/ssp.c b/sound/soc/pxa/ssp.c new file mode 100644 index 0000000..444b643 --- /dev/null +++ b/sound/soc/pxa/ssp.c @@ -0,0 +1,298 @@ +/* + * ssp.c -- ALSA Soc Audio Layer + * + * Copyright 2009-2010 Marvell International Ltd. + * Author: + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/clk.h> +#include <sound/core.h> +#include <sound/soc.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/pxa2xx-lib.h> + +#include <mach/hardware.h> +#include <mach/dma.h> +#include <mach/regs-ssp.h> + +#include <plat/ssp.h> + +#include "ssp.h" + +struct pxa2xx_pcm_dma_data { + struct pxa2xx_pcm_dma_params params; + char name[20]; +}; + +struct pxa2xx_pcm_dma_params * +pxa_ssp_get_dma_params(struct ssp_device *ssp, int width4, int out) +{ + struct pxa2xx_pcm_dma_data *dma; + + dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL); + if (dma == NULL) + return NULL; + + snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id, + width4 ? "32-bit" : "16-bit", out ? "out" : "in"); + + dma->params.name = dma->name; + dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx); + dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) : + (DCMD_INCTRGADDR | DCMD_FLOWSRC)) | + (width4 ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16; + dma->params.dev_addr = ssp->phys_base + SSDR; + + return &dma->params; +} +EXPORT_SYMBOL(pxa_ssp_get_dma_params); + +static int pxa_ssp_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct ssp_info *info = cpu_dai->private_data; + int ret = 0; + + if (!cpu_dai->active) { + info->dev.port = cpu_dai->id + 1; + info->dev.irq = NO_IRQ; + clk_enable(info->dev.ssp->clk); + ssp_disable(&info->dev); + } + + if (cpu_dai->dma_data) { + kfree(cpu_dai->dma_data); + cpu_dai->dma_data = NULL; + } + return ret; +} + +static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct ssp_info *info = cpu_dai->private_data; + + if (!cpu_dai->active) { + ssp_disable(&info->dev); + clk_disable(info->dev.ssp->clk); + } + + if (cpu_dai->dma_data) { + kfree(cpu_dai->dma_data); + cpu_dai->dma_data = NULL; + } +} + +#ifdef CONFIG_PM + +static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai) +{ + struct ssp_info *info = cpu_dai->private_data; + + if (!cpu_dai->active) + clk_enable(info->dev.ssp->clk); + + ssp_save_state(&info->dev, &info->state); + clk_disable(info->dev.ssp->clk); + + return 0; +} + +static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) +{ + struct ssp_info *info = cpu_dai->private_data; + + clk_enable(info->dev.ssp->clk); + ssp_restore_state(&info->dev, &info->state); + + if (cpu_dai->active) + ssp_enable(&info->dev); + else + clk_disable(info->dev.ssp->clk); + + return 0; +} + +#else +#define pxa_ssp_suspend NULL +#define pxa_ssp_resume NULL +#endif + +/* + * Set the active slots in TDM/Network mode + */ +static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, + unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) +{ + struct ssp_info *info = cpu_dai->private_data; + struct ssp_device *ssp = info->dev.ssp; + u32 sscr0; + + sscr0 = ssp_read_reg(ssp, SSCR0); + sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS); + + /* set slot width */ + if (slot_width > 16) + sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16); + else + sscr0 |= SSCR0_DataSize(slot_width); + + if (slots > 1) { + /* enable network mode */ + sscr0 |= SSCR0_MOD; + + /* set number of active slots */ + sscr0 |= SSCR0_SlotsPerFrm(slots); + + /* set active slot mask */ + ssp_write_reg(ssp, SSTSA, tx_mask); + ssp_write_reg(ssp, SSRSA, rx_mask); + } + ssp_write_reg(ssp, SSCR0, sscr0); + + return 0; +} + +/* + * Tristate the SSP DAI lines + */ +static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai, + int tristate) +{ + struct ssp_info *info = cpu_dai->private_data; + struct ssp_device *ssp = info->dev.ssp; + u32 sscr1; + + sscr1 = ssp_read_reg(ssp, SSCR1); + if (tristate) + sscr1 &= ~SSCR1_TTE; + else + sscr1 |= SSCR1_TTE; + ssp_write_reg(ssp, SSCR1, sscr1); + + return 0; +} + +static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret = 0; + struct ssp_info *info = cpu_dai->private_data; + struct ssp_device *ssp = info->dev.ssp; + int val; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_RESUME: + ssp_enable(&info->dev); + break; + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + val = ssp_read_reg(ssp, SSCR1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + val |= SSCR1_TSRE; + else + val |= SSCR1_RSRE; + ssp_write_reg(ssp, SSCR1, val); + val = ssp_read_reg(ssp, SSSR); + ssp_write_reg(ssp, SSSR, val); + break; + case SNDRV_PCM_TRIGGER_START: + val = ssp_read_reg(ssp, SSCR1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + val |= SSCR1_TSRE; + else + val |= SSCR1_RSRE; + ssp_write_reg(ssp, SSCR1, val); + ssp_enable(&info->dev); + break; + case SNDRV_PCM_TRIGGER_STOP: + val = ssp_read_reg(ssp, SSCR1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + val &= ~SSCR1_TSRE; + else + val &= ~SSCR1_RSRE; + ssp_write_reg(ssp, SSCR1, val); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + ssp_disable(&info->dev); + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + val = ssp_read_reg(ssp, SSCR1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + val &= ~SSCR1_TSRE; + else + val &= ~SSCR1_RSRE; + ssp_write_reg(ssp, SSCR1, val); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static int pxa_ssp_probe(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct ssp_info *info; + int ret; + + info = kzalloc(sizeof(struct ssp_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev.ssp = ssp_request(dai->id + 1, "SoC audio"); + if (info->dev.ssp == NULL) { + ret = -ENODEV; + goto err; + } + + info->dai_fmt = (unsigned int) -1; + dai->private_data = info; + + return 0; + +err: + kfree(info); + return ret; +} + +static void pxa_ssp_remove(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct ssp_info *info = dai->private_data; + ssp_free(info->dev.ssp); +} + +int pxa_ssp_register_dai(struct snd_soc_dai *dai) +{ + struct snd_soc_dai_ops *ops = dai->ops; + + ops->startup = pxa_ssp_startup; + ops->shutdown = pxa_ssp_shutdown; + ops->trigger = pxa_ssp_trigger; + ops->set_tdm_slot = pxa_ssp_set_dai_tdm_slot; + ops->set_tristate = pxa_ssp_set_dai_tristate; + + dai->probe = pxa_ssp_probe; + dai->remove = pxa_ssp_remove; + dai->suspend = pxa_ssp_suspend; + dai->resume = pxa_ssp_resume; + + return snd_soc_register_dai(dai); +} +EXPORT_SYMBOL(pxa_ssp_register_dai); diff --git a/sound/soc/pxa/ssp.h b/sound/soc/pxa/ssp.h new file mode 100644 index 0000000..314c06d --- /dev/null +++ b/sound/soc/pxa/ssp.h @@ -0,0 +1,42 @@ +/* + * ssp.h -- ALSA Soc Audio Layer Head file + * + * Copyright 2009-2010 Marvell International Ltd. + * Author: + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __PXA_SSP_H +#define __PXA_SSP_H + +/* + * SSP audio data + */ +struct ssp_info { + struct ssp_dev dev; + unsigned int sysclk; + int dai_fmt; +#ifdef CONFIG_PM + struct ssp_state state; +#endif +}; + +struct dai_ssp { + unsigned int sysclk; + int dai_fmt; +#ifdef CONFIG_PM + struct ssp_state state; +#endif +}; + +extern struct pxa2xx_pcm_dma_params * +pxa_ssp_get_dma_params(struct ssp_device *ssp, int width4, int out); +extern int pxa_ssp_register_dai(struct snd_soc_dai *dai); + +#endif /* __PXA_SSP_H */ diff --git a/sound/soc/pxa/tavorevb3.c b/sound/soc/pxa/tavorevb3.c new file mode 100644 index 0000000..3ee39d4 --- /dev/null +++ b/sound/soc/pxa/tavorevb3.c @@ -0,0 +1,193 @@ +/* + * tavorevb3.c -- SoC audio for Tavor EVB3 + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "pxa-ssp.h" + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *evb3_snd_device; + +static struct snd_soc_jack hs_jack; + +static struct snd_soc_jack_pin hs_jack_pins[] = { + { .pin = "Headset Stereophone", .mask = SND_JACK_HEADPHONE, }, + { .pin = "Headset Mic 2", .mask = SND_JACK_MICROPHONE, }, +}; + +/* tavorevb3 machine dapm widgets */ +static const struct snd_soc_dapm_widget evb3_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headset Stereophone", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Ext Speaker", NULL), + SND_SOC_DAPM_MIC("Ext Mic 1", NULL), + SND_SOC_DAPM_MIC("Headset Mic 2", NULL), + SND_SOC_DAPM_MIC("Ext Mic 3", NULL), +}; + +/* tavorevb3 machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headset Stereophone", NULL, "HS1"}, + {"Headset Stereophone", NULL, "HS2"}, + + {"Ext Speaker", NULL, "LSP"}, + {"Ext Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Ext Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Headset Mic 2"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Ext Mic 3"}, +}; + +static int evb3_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + return ret; +} + +static struct snd_soc_ops evb3_i2s_ops = { + .hw_params = evb3_i2s_hw_params, +}; + +static struct snd_soc_dai_link evb3_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = evb3_pm860x_init, + .ops = &evb3_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_evb3 = { + .name = "Tavor EVB3", + .dai_link = evb3_dai, + .num_links = ARRAY_SIZE(evb3_dai), +}; + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + snd_soc_dapm_new_controls(codec, evb3_dapm_widgets, + ARRAY_SIZE(evb3_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* connected pins */ + snd_soc_dapm_enable_pin(codec, "Ext Speaker"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 1"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 3"); + snd_soc_dapm_disable_pin(codec, "Headset Mic 2"); + snd_soc_dapm_disable_pin(codec, "Headset Stereophone"); + + ret = snd_soc_dapm_sync(codec); + if (ret) + return ret; + + /* Headset jack detection */ + snd_soc_jack_new(codec, "Headset Jack", SND_JACK_HEADSET + | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2, + &hs_jack); + snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), + hs_jack_pins); + /* headphone, microphone detection & headset short detection */ + pm860x_hs_jack_detect(codec, &hs_jack, SND_JACK_HEADSET, + SND_JACK_BTN_0); + pm860x_hook_detect(codec, &hs_jack, SND_JACK_BTN_1, SND_JACK_BTN_2); + return 0; +} + +static int __init tavorevb3_init(void) +{ + int ret; + + if (!machine_is_tavorevb3()) + return -ENODEV; + evb3_snd_device = platform_device_alloc("soc-audio", -1); + if (!evb3_snd_device) + return -ENOMEM; + + platform_set_drvdata(evb3_snd_device, &snd_soc_card_evb3); + + ret = platform_device_add(evb3_snd_device); + if (ret) + platform_device_put(evb3_snd_device); + + return ret; +} + +static void __exit tavorevb3_exit(void) +{ + platform_device_unregister(evb3_snd_device); +} + +module_init(tavorevb3_init); +module_exit(tavorevb3_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Tavor EVB3"); +MODULE_LICENSE("GPL"); + -- 1.5.6.5

1 0

[PATCH 2/3] ASoC: add tavorevb3 machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

88PM860x codec is used in Marvell tavorevb3 development board. 88PM860x codec is used as master mode of SSP communication. Only I2S format is supported. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/tavorevb3.c | 193 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 204 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/tavorevb3.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index e30c832..04ddc7b 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -117,6 +117,15 @@ config SND_PXA2XX_SOC_PALM27X Say Y if you want to add support for SoC audio on Palm T|X, T5, E2 or LifeDrive handheld computer. +config SND_SOC_TAVOREVB3 + tristate "SoC Audio support for Marvell Tavor EVB3" + depends on SND_PXA2XX_SOC && MACH_TAVOREVB3 + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + config SND_SOC_ZYLONITE tristate "SoC Audio support for Marvell Zylonite" depends on SND_PXA2XX_SOC && MACH_ZYLONITE diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index caa03d8..315941f 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -19,6 +19,7 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-tavorevb3-objs := tavorevb3.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o snd-soc-mioa701-objs := mioa701_wm9713.o @@ -38,6 +39,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o +obj-$(CONFIG_SND_SOC_TAVOREVB3) += snd-soc-tavorevb3.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o obj-$(CONFIG_SND_SOC_RAUMFELD) += snd-soc-raumfeld.o diff --git a/sound/soc/pxa/tavorevb3.c b/sound/soc/pxa/tavorevb3.c new file mode 100644 index 0000000..3ee39d4 --- /dev/null +++ b/sound/soc/pxa/tavorevb3.c @@ -0,0 +1,193 @@ +/* + * tavorevb3.c -- SoC audio for Tavor EVB3 + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "pxa-ssp.h" + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *evb3_snd_device; + +static struct snd_soc_jack hs_jack; + +static struct snd_soc_jack_pin hs_jack_pins[] = { + { .pin = "Headset Stereophone", .mask = SND_JACK_HEADPHONE, }, + { .pin = "Headset Mic 2", .mask = SND_JACK_MICROPHONE, }, +}; + +/* tavorevb3 machine dapm widgets */ +static const struct snd_soc_dapm_widget evb3_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headset Stereophone", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Ext Speaker", NULL), + SND_SOC_DAPM_MIC("Ext Mic 1", NULL), + SND_SOC_DAPM_MIC("Headset Mic 2", NULL), + SND_SOC_DAPM_MIC("Ext Mic 3", NULL), +}; + +/* tavorevb3 machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headset Stereophone", NULL, "HS1"}, + {"Headset Stereophone", NULL, "HS2"}, + + {"Ext Speaker", NULL, "LSP"}, + {"Ext Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Ext Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Headset Mic 2"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Ext Mic 3"}, +}; + +static int evb3_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + return ret; +} + +static struct snd_soc_ops evb3_i2s_ops = { + .hw_params = evb3_i2s_hw_params, +}; + +static struct snd_soc_dai_link evb3_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = evb3_pm860x_init, + .ops = &evb3_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_evb3 = { + .name = "Tavor EVB3", + .dai_link = evb3_dai, + .num_links = ARRAY_SIZE(evb3_dai), +}; + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + snd_soc_dapm_new_controls(codec, evb3_dapm_widgets, + ARRAY_SIZE(evb3_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* connected pins */ + snd_soc_dapm_enable_pin(codec, "Ext Speaker"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 1"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 3"); + snd_soc_dapm_disable_pin(codec, "Headset Mic 2"); + snd_soc_dapm_disable_pin(codec, "Headset Stereophone"); + + ret = snd_soc_dapm_sync(codec); + if (ret) + return ret; + + /* Headset jack detection */ + snd_soc_jack_new(codec, "Headset Jack", SND_JACK_HEADSET + | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2, + &hs_jack); + snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), + hs_jack_pins); + /* headphone, microphone detection & headset short detection */ + pm860x_hs_jack_detect(codec, &hs_jack, SND_JACK_HEADSET, + SND_JACK_BTN_0); + pm860x_hook_detect(codec, &hs_jack, SND_JACK_BTN_1, SND_JACK_BTN_2); + return 0; +} + +static int __init tavorevb3_init(void) +{ + int ret; + + if (!machine_is_tavorevb3()) + return -ENODEV; + evb3_snd_device = platform_device_alloc("soc-audio", -1); + if (!evb3_snd_device) + return -ENOMEM; + + platform_set_drvdata(evb3_snd_device, &snd_soc_card_evb3); + + ret = platform_device_add(evb3_snd_device); + if (ret) + platform_device_put(evb3_snd_device); + + return ret; +} + +static void __exit tavorevb3_exit(void) +{ + platform_device_unregister(evb3_snd_device); +} + +module_init(tavorevb3_init); +module_exit(tavorevb3_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Tavor EVB3"); +MODULE_LICENSE("GPL"); + -- 1.5.6.5

1 0

[PATCH 2/3] ASoC: add tavorevb3 machine driver for 88pm860x
by Haojian Zhuang 17 Aug '10

17 Aug '10

88PM860x codec is used in Marvell tavorevb3 development board. 88PM860x codec is used as master mode of SSP communication. Only I2S format is supported. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/tavorevb3.c | 200 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 211 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/tavorevb3.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index e30c832..04ddc7b 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -117,6 +117,15 @@ config SND_PXA2XX_SOC_PALM27X Say Y if you want to add support for SoC audio on Palm T|X, T5, E2 or LifeDrive handheld computer. +config SND_SOC_TAVOREVB3 + tristate "SoC Audio support for Marvell Tavor EVB3" + depends on SND_PXA2XX_SOC && MACH_TAVOREVB3 + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + config SND_SOC_ZYLONITE tristate "SoC Audio support for Marvell Zylonite" depends on SND_PXA2XX_SOC && MACH_ZYLONITE diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index caa03d8..315941f 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -19,6 +19,7 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-tavorevb3-objs := tavorevb3.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o snd-soc-mioa701-objs := mioa701_wm9713.o @@ -38,6 +39,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o +obj-$(CONFIG_SND_SOC_TAVOREVB3) += snd-soc-tavorevb3.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o obj-$(CONFIG_SND_SOC_RAUMFELD) += snd-soc-raumfeld.o diff --git a/sound/soc/pxa/tavorevb3.c b/sound/soc/pxa/tavorevb3.c new file mode 100644 index 0000000..248c283 --- /dev/null +++ b/sound/soc/pxa/tavorevb3.c @@ -0,0 +1,200 @@ +/* + * tavorevb3.c -- SoC audio for Tavor EVB3 + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "pxa-ssp.h" + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *evb3_snd_device; + +static struct snd_soc_jack hs_jack, mic_jack; + +static struct snd_soc_jack_pin hs_jack_pins[] = { + { .pin = "Headset Stereophone", .mask = SND_JACK_HEADPHONE, }, +}; + +static struct snd_soc_jack_pin mic_jack_pins[] = { + { .pin = "Headset Mic 2", .mask = SND_JACK_MICROPHONE, }, +}; + +/* tavorevb3 machine dapm widgets */ +static const struct snd_soc_dapm_widget evb3_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headset Stereophone", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Ext Speaker", NULL), + SND_SOC_DAPM_MIC("Ext Mic 1", NULL), + SND_SOC_DAPM_MIC("Headset Mic 2", NULL), + SND_SOC_DAPM_MIC("Ext Mic 3", NULL), +}; + +/* tavorevb3 machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headset Stereophone", NULL, "HS1"}, + {"Headset Stereophone", NULL, "HS2"}, + + {"Ext Speaker", NULL, "LSP"}, + {"Ext Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Ext Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Headset Mic 2"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Ext Mic 3"}, +}; + +static int evb3_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + return ret; +} + +static struct snd_soc_ops evb3_i2s_ops = { + .hw_params = evb3_i2s_hw_params, +}; + +static struct snd_soc_dai_link evb3_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = evb3_pm860x_init, + .ops = &evb3_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_evb3 = { + .name = "Tavor EVB3", + .dai_link = evb3_dai, + .num_links = ARRAY_SIZE(evb3_dai), +}; + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + snd_soc_dapm_new_controls(codec, evb3_dapm_widgets, + ARRAY_SIZE(evb3_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* connected pins */ + snd_soc_dapm_enable_pin(codec, "Ext Speaker"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 1"); + snd_soc_dapm_enable_pin(codec, "Ext Mic 3"); + snd_soc_dapm_disable_pin(codec, "Headset Mic 2"); + snd_soc_dapm_disable_pin(codec, "Headset Stereophone"); + + ret = snd_soc_dapm_sync(codec); + if (ret) + return ret; + + /* Headset jack detection */ + snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE + | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2, + &hs_jack); + snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), + hs_jack_pins); + snd_soc_jack_new(codec, "Microphone Jack", SND_JACK_MICROPHONE, + &mic_jack); + snd_soc_jack_add_pins(&mic_jack, ARRAY_SIZE(mic_jack_pins), + mic_jack_pins); + + /* headphone, microphone detection & headset short detection */ + pm860x_hs_jack_detect(codec, &hs_jack, SND_JACK_HEADPHONE, + SND_JACK_BTN_0, SND_JACK_BTN_1, SND_JACK_BTN_2); + pm860x_mic_jack_detect(codec, &hs_jack, SND_JACK_MICROPHONE); + return 0; +} + +static int __init tavorevb3_init(void) +{ + int ret; + + if (!machine_is_tavorevb3()) + return -ENODEV; + evb3_snd_device = platform_device_alloc("soc-audio", -1); + if (!evb3_snd_device) + return -ENOMEM; + + platform_set_drvdata(evb3_snd_device, &snd_soc_card_evb3); + + ret = platform_device_add(evb3_snd_device); + if (ret) + platform_device_put(evb3_snd_device); + + return ret; +} + +static void __exit tavorevb3_exit(void) +{ + platform_device_unregister(evb3_snd_device); +} + +module_init(tavorevb3_init); +module_exit(tavorevb3_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Tavor EVB3"); +MODULE_LICENSE("GPL"); -- 1.5.6.5

1 0

[alsa-devel] Temporary ASoC tree for next
by Mark Brown 17 Aug '10

17 Aug '10

Hi Stephen, Liam has recently done some work on ASoC to enhance the ability to work with multiple external devices which we're expecting to get in for .37. Since this work required some architecture modifications and we've had a bit of trouble getting testers we're expecting a higher than average degree of cross-tree issues this cycle so in order to avoid affecting all other ALSA work we'd like to have a separate ASoC-specific tree in -next for this release cycle if possible: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-next Please also include Liam as a contact for the tree. Thanks, Mark

2 1

[alsa-devel] [PATCH] ASoC: Remove unused WM8974 private data
by Mark Brown 16 Aug '10

16 Aug '10

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8974.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index e61728b..b4363f6 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -607,7 +607,6 @@ static int wm8974_resume(struct snd_soc_codec *codec) static int wm8974_probe(struct snd_soc_codec *codec) { - struct wm8974_priv *wm8974 = snd_soc_codec_get_drvdata(codec); int ret = 0; ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_I2C); -- 1.7.1

1 0

[alsa-devel] [PATCH 1/2] ASoC: Fix WM8580 CLKSEL mask selection
by Mark Brown 16 Aug '10

16 Aug '10

The RX and TX directions were inverted. Reported-by: Seungwhan Youn <claude.youn(a)gmail.com> Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8580.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index af4517e..42a6699 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -703,12 +703,12 @@ static int wm8580_set_sysclk(struct snd_soc_dai *dai, int clk_id, int sel, sel_mask, sel_shift; switch (dai->driver->id) { - case WM8580_DAI_PAIFTX: + case WM8580_DAI_PAIFRX: sel_mask = 0x3; sel_shift = 0; break; - case WM8580_DAI_PAIFRX: + case WM8580_DAI_PAIFTX: sel_mask = 0xc; sel_shift = 2; break; -- 1.7.1

2 2

Re: [alsa-devel] ALC892 support for multiple spdif outputs
by Sander Knopper 16 Aug '10

16 Aug '10

> At Sun, 15 Aug 2010 14:57:51 +0200, > > Sander Knopper wrote: > > Dear developers, > > > > I've opened a bug about this problem which can be viewed here: > > https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5101 > > > > Raymond mentions in his last comment that I should ask you to, if I > > understand correctly, do the same trick as in the commit he refers to > > also for the ALC892 chip. Which obviously is the one I have... > > > > You can find all the relevant information in the bug entry. > > Could you post the exact problem and attach alsa-info.sh output to ML? > It'll help much for communication on ML. > > > Takashi Ok, I can do that... The problem is that I have an Asus P7H55 M Pro motherboard which uses the ALC892 codec. I'm using this system as a HTPC and thus I'm trying to get sound from the HTPC to my receiver. The motherboard only has an optical output which shouldn't be an problem, be it that my receiver only has a coaxial input. So I bought an spdif bracket made by Asus which has both a coaxial and optical output and connected it to the internal spdif pins on the motherboard. So far so good, but the real problem is that I can't get the bracket to work. When I unmute all the spdif related entries with alsamixer only the optical output on the motherboard itself "gives light" and the one on the bracket doesn't. I've searched the internet a bit and I tried switching the audio output in the bios from HDMI to SPDIF and vice versa, but that doesn't make any difference. alsa-info is attached. Regards, Sander

1 0

[alsa-devel] ALC892 support for multiple spdif outputs
by Sander Knopper 16 Aug '10

16 Aug '10

Dear developers, I've opened a bug about this problem which can be viewed here: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5101 Raymond mentions in his last comment that I should ask you to, if I understand correctly, do the same trick as in the commit he refers to also for the ALC892 chip. Which obviously is the one I have... You can find all the relevant information in the bug entry. Please CC me as I'm not subscribed to the list. Best regards, Sander Knopper

2 1

[alsa-devel] possible fix for buffer underruns on msm7k alsa driver
by Denis 'GNUtoo' Carikli 15 Aug '10

15 Aug '10

hi, I'm still rebasing the codeaurora alsa driver for msm soc like the htcdream on the android msm 2.6.32 kernel. I looked the commits for the other socs like msm7kv2 and qsd8k(snapdragon) and I found that commit: commit ac97ef246a754b9a2b4236ca08c6ade389dc206f Author: Pradeep Jilagam <pjilagam(a)qualcomm.com> Date: Wed Apr 7 17:38:20 2010 +0530 alsa: 8k: Limit period size for sample rates greater than 8KHz The DSP interrupts are non-periodic. ALSA expects periodic acknowledgement for the buffers sent. Hence, the alsa driver uses timer as alternate interrupt source. The min resolution is 10ms which results in distorted audio for some sample rates. Hence restricting the minimum period size for sample rates greater than 8KHz to 512 frames. Change-Id: Ic8c4180fbee7242fa3139230ddcf6a9f98e4c7ab CRs-fixed: 231784 Signed-off-by: Pradeep Jilagam <pjilagam(a)qualcomm.com> I tried a big buck bunny at 44100 Hz: lots(too much) of buffer underrun => too bad to be usable. Then I tried it with 8000 Hz and found nearly no buffer underruns => usable. So I've great expectations for that fix. here's the source code involved in the fix: static int hw_rule_periodsize_by_rate(struct snd_pcm_hw_params *params, struct snd_pcm_hw_rule *rule) { struct snd_interval *ps = hw_param_interval(params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE); struct snd_interval *r = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); struct snd_interval ch; if (!ps || !r){ pr_debug("REMOVE_THAT: exiting from !ps||!r\n"); return 0; }else{ pr_debug("REMOVE_THAT: not exiting\n"); } snd_interval_any(&ch); if (r->min > 8000) { ch.min = 512; pr_debug("Minimum period size is adjusted to 512\n"); return snd_interval_refine(ps, &ch); } return 0; } static int msm_pcm_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct msm_audio *prtd; int ret = 0; prtd = kzalloc(sizeof(struct msm_audio), GFP_KERNEL); if (prtd == NULL) { ret = -ENOMEM; return ret; } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { msm_vol_ctl.update = 1; /* Update Volume, with Cached value */ runtime->hw = msm_pcm_playback_hardware; prtd->dir = SNDRV_PCM_STREAM_PLAYBACK; prtd->playback_substream = substream; prtd->eos_ack = 0; } else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { runtime->hw = msm_pcm_capture_hardware; prtd->dir = SNDRV_PCM_STREAM_CAPTURE; prtd->capture_substream = substream; } ret = snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_sample_rates); if (ret < 0) goto out; /* Ensure that buffer size is a multiple of period size */ ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); if (ret < 0) goto out; ret = snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, hw_rule_periodsize_by_rate, substream, SNDRV_PCM_HW_PARAM_RATE, -1); if (ret < 0) goto out; prtd->ops = &snd_msm_audio_ops; prtd->out[0].used = BUF_INVALID_LEN; prtd->out_head = 1; /* point to second buffer on startup */ runtime->private_data = prtd; ret = alsa_adsp_configure(prtd); if (ret) goto out; copy_count = 0; return 0; out: kfree(prtd); return ret; } Unfortunately it doesn't seem to print the REMOVE_THAT debug messages in dmesg,after playing something with mplayer, like a 44100 Hz song in mp3 format with mplayer. I wonder why the hw_rule_periodsize_by_rate function is not executed. Background: The htcdream is the first android smartphone and has by default a dsp interface that is not alsa nor oss nor something that was created before. Codeaurora(qualcomm) had some alsa driver,I rebased it but it was buggy,so I tried to debug it and succedded at making mplayer run,but it had many buffer underruns... Denis.

2 5

[alsa-devel] Extern dsp device
by Christoph Kuhr 15 Aug '10

15 Aug '10

Hi everybody, In my bachlor project im planing to realise an outboard fpga dsp device connected by gbit ethernet and driven by alsa. The idea: computer system with linux rt kernel, extra gbit ethernet if and for example rme hdsp 9652 audio if. Outboard fpga with gbit if and DSP routines (PureD ata Engine?) Now the fpga board is connected via gbit eth, the kernel gets it and inserts the gbit ethernet card into the audio signal path. Managed with and alsa driver, cooperating with the snd-rme9652. With a gui sending OSC to the fpga board, controlling the dsp. Goal: zero-latency routing and dsp Do you think this strategy might work? Ck

2 2

[alsa-devel] [PATCH] ASoC: multi-component: Fix reference to moved header file, which was unused anyway.
by Ian Lartey 15 Aug '10

15 Aug '10

Removed #include of pxa2xx-pcm.h Signed-off-by: Ian Lartey <ian(a)opensource.wolfsonmicro.com> --- sound/soc/pxa/pxa2xx-i2s.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 3b473b2..d1b2ca6 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -27,7 +27,6 @@ #include <mach/dma.h> #include <mach/audio.h> -#include "pxa2xx-pcm.h" #include "pxa2xx-i2s.h" /* -- 1.7.0.4

2 1

[alsa-devel] [PATCH 2/5] ASoC: fix pxa2xx-pcm.h path
by Haojian Zhuang 15 Aug '10

15 Aug '10

4 3

[alsa-devel] [patch] sound/usb/format: silence uninitialized variable warnings
by Dan Carpenter 15 Aug '10

15 Aug '10

Gcc complains that ret might be used uninitialized: sound/usb/format.c: In function ‘snd_usb_parse_audio_format’: sound/usb/format.c:354: warning: ‘ret’ may be used uninitialized in this function sound/usb/format.c:354: note: ‘ret’ was declared here sound/usb/format.c:414: warning: ‘ret’ may be used uninitialized in this function sound/usb/format.c:414: note: ‘ret’ was declared here I suppose it could be if there is ever a UAC_VERSION_3 released. Anyway this patch is worthwhile if only to silence the gcc warning. Signed-off-by: Dan Carpenter <error27(a)gmail.com> diff --git a/sound/usb/format.c b/sound/usb/format.c index 4387f54..1400174 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -351,7 +351,8 @@ static int parse_audio_format_i(struct snd_usb_audio *chip, { struct usb_interface_descriptor *altsd = get_iface_desc(iface); int protocol = altsd->bInterfaceProtocol; - int pcm_format, ret; + int pcm_format; + int ret = -EINVAL; if (fmt->bFormatType == UAC_FORMAT_TYPE_III) { /* FIXME: the format type is really IECxxx @@ -411,9 +412,10 @@ static int parse_audio_format_ii(struct snd_usb_audio *chip, int format, void *_fmt, struct usb_host_interface *iface) { - int brate, framesize, ret; + int brate, framesize; struct usb_interface_descriptor *altsd = get_iface_desc(iface); int protocol = altsd->bInterfaceProtocol; + int ret = -EINVAL; switch (format) { case UAC_FORMAT_TYPE_II_AC3:

3 4

[alsa-devel] ASoC: Make ams-delta/cx20442 pair back working for multi-component
by Janusz Krzysztofik 14 Aug '10

14 Aug '10

1. After a static codec pointer removal from the sound/soc/codecs/cx20442.c code, both codec and card specific tty line discipline functions lost their access to the codec structure data. Arrange for passing the pointer back to the codec tty ldisc bits from the card initialization code. 2. Update incosistent codec device naming in the card code. 3. Since a new element, control_data, has been added to the cx20442_priv structure, it looks like the old snd_soc_codec->control_data may be scheduled for removal. To avoid problems in the near future, use the cx20442_priv->control_data instead of the snd_soc_codec->control_data throughout the cx20442 code. In the ams-delta card code, check for the snd_soc_codec->hw_write not NULL instead of the snd_soc_codec->control_data. Created and tested on Amstrad Delta against git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6.git, commit a212dd5b2e1da045cbf423c70c87f48265531de4. Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> --- --- git/sound/soc/codecs/cx20442.c.orig 2010-08-10 17:43:17.000000000 +0200 +++ git/sound/soc/codecs/cx20442.c 2010-08-11 01:08:23.000000000 +0200 @@ -165,6 +165,7 @@ static int cx20442_pm_to_v253_vsp(u8 val static int cx20442_write(struct snd_soc_codec *codec, unsigned int reg, unsigned int value) { + struct cx20442_priv *cx20442 = snd_soc_codec_get_drvdata(codec); u8 *reg_cache = codec->reg_cache; int vls, vsp, old, len; char buf[18]; @@ -174,7 +175,7 @@ static int cx20442_write(struct snd_soc_ /* hw_write and control_data pointers required for talking to the modem * are expected to be set by the line discipline initialization code */ - if (!codec->hw_write || !codec->control_data) + if (!codec->hw_write || !cx20442->control_data) return -EIO; old = reg_cache[reg]; @@ -203,17 +204,13 @@ static int cx20442_write(struct snd_soc_ return -ENOMEM; dev_dbg(codec->dev, "%s: %s\n", __func__, buf); - if (codec->hw_write(codec->control_data, buf, len) != len) + if (codec->hw_write(cx20442->control_data, buf, len) != len) return -EIO; return 0; } -/* Moved up here as line discipline referres it during initialization */ -static struct snd_soc_codec *cx20442_codec; - - /* * Line discpline related code * @@ -229,15 +226,15 @@ static const char *v253_init = "ate0m0q0 /* Line discipline .open() */ static int v253_open(struct tty_struct *tty) { - struct snd_soc_codec *codec = cx20442_codec; int ret, len = strlen(v253_init); /* Doesn't make sense without write callback */ if (!tty->ops->write) return -EINVAL; - /* Pass the codec structure address for use by other ldisc callbacks */ - tty->disc_data = codec; + /* Won't work if no codec pointer has been passed by a card driver */ + if (!tty->disc_data) + return -ENODEV; if (tty->ops->write(tty, v253_init, len) != len) { ret = -EIO; @@ -254,15 +251,18 @@ err: static void v253_close(struct tty_struct *tty) { struct snd_soc_codec *codec = tty->disc_data; + struct cx20442_priv *cx20442; tty->disc_data = NULL; if (!codec) return; + cx20442 = snd_soc_codec_get_drvdata(codec); + /* Prevent the codec driver from further accessing the modem */ codec->hw_write = NULL; - codec->control_data = NULL; + cx20442->control_data = NULL; codec->pop_time = 0; } @@ -278,15 +278,18 @@ static void v253_receive(struct tty_stru const unsigned char *cp, char *fp, int count) { struct snd_soc_codec *codec = tty->disc_data; + struct cx20442_priv *cx20442; if (!codec) return; - if (!codec->control_data) { + cx20442 = snd_soc_codec_get_drvdata(codec); + + if (!cx20442->control_data) { /* First modem response, complete setup procedure */ /* Set up codec driver access to modem controls */ - codec->control_data = tty; + cx20442->control_data = tty; codec->hw_write = (hw_write_t)tty->ops->write; codec->pop_time = 1; } @@ -343,7 +346,7 @@ static int cx20442_codec_probe(struct sn cx20442_add_widgets(codec); - codec->control_data = NULL; + cx20442->control_data = NULL; codec->hw_write = NULL; codec->pop_time = 0; @@ -355,8 +358,8 @@ static int cx20442_codec_remove(struct s { struct cx20442_priv *cx20442 = snd_soc_codec_get_drvdata(codec); - if (codec->control_data) { - struct tty_struct *tty = codec->control_data; + if (cx20442->control_data) { + struct tty_struct *tty = cx20442->control_data; tty_hangup(tty); } --- git/sound/soc/omap/ams-delta.c.orig 2010-08-10 17:43:17.000000000 +0200 +++ git/sound/soc/omap/ams-delta.c 2010-08-11 00:58:22.000000000 +0200 @@ -99,7 +99,7 @@ static int ams_delta_set_audio_mode(stru int pin, changed = 0; /* Refuse any mode changes if we are not able to control the codec. */ - if (!codec->control_data) + if (!codec->hw_write) return -EUNATCH; if (ucontrol->value.enumerated.item[0] >= control->max) @@ -268,10 +268,32 @@ static void cx81801_timeout(unsigned lon ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, 0); } +/* + * Used for passing a codec structure pointer + * from the board initialization code to the tty line discipline. + */ +static struct snd_soc_codec *cx20442_codec; + /* Line discipline .open() */ static int cx81801_open(struct tty_struct *tty) { - return v253_ops.open(tty); + int ret; + + if (!cx20442_codec) + return -ENODEV; + + /* + * Pass the codec structure pointer for use by other ldisc callbacks, + * both the card and the codec specific parts. + */ + tty->disc_data = cx20442_codec; + + ret = v253_ops.open(tty); + + if (ret < 0) + tty->disc_data = NULL; + + return ret; } /* Line discipline .close() */ @@ -281,11 +303,14 @@ static void cx81801_close(struct tty_str del_timer_sync(&cx81801_timer); - v253_ops.close(tty); - /* Prevent the hook switch from further changing the DAPM pins */ INIT_LIST_HEAD(&ams_delta_hook_switch.pins); + if (!codec) + return; + + v253_ops.close(tty); + /* Revert back to default audio input/output constellation */ snd_soc_dapm_disable_pin(codec, "Mouthpiece"); snd_soc_dapm_enable_pin(codec, "Earpiece"); @@ -310,7 +335,10 @@ static void cx81801_receive(struct tty_s const unsigned char *c; int apply, ret; - if (!codec->control_data) { + if (!codec) + return; + + if (!codec->hw_write) { /* First modem response, complete setup procedure */ /* Initialize timer used for config pulse generation */ @@ -469,6 +497,9 @@ static int ams_delta_cx20442_init(struct int ret; /* Codec is ready, now add/activate board specific controls */ + /* Store a pointer to the codec structure for tty ldisc use */ + cx20442_codec = codec; + /* Set up digital mute if not provided by the codec */ if (!codec_dai->driver->ops) { codec_dai->driver->ops = &ams_delta_dai_ops; @@ -595,8 +626,8 @@ static int __init ams_delta_module_init( * Codec platform device could be registered from elsewhere (board?), * but I do it here as it makes sense only if used with the card. */ - cx20442_platform_device = platform_device_register_simple("cx20442", - -1, NULL, 0); + cx20442_platform_device = + platform_device_register_simple("cx20442-codec", -1, NULL, 0); return 0; err: platform_device_put(ams_delta_audio_platform_device);

3 5

[alsa-devel] [PATCH 1/2] ASoC: Set up debugfs only once per CODEC
by Mark Brown 14 Aug '10

14 Aug '10

Since the debugfs directory is current per CODEC we should only init it when the CODEC is initialised, otherwise we end up with errors being generated when an attempt is made to add duplicate debugfs entries. Since most of this stuff is actually for the card we should refactor but this can come later. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/soc-core.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a004876..ac0fa22 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1323,6 +1323,9 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) return ret; } } + + soc_init_codec_debugfs(codec); + /* mark codec as probed and add to card codec list */ codec->probed = 1; list_add(&codec->card_list, &card->codec_dev_list); @@ -1400,8 +1403,6 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) if (ret < 0) printk(KERN_WARNING "asoc: failed to add codec sysfs files\n"); - soc_init_codec_debugfs(codec); - /* create the pcm */ ret = soc_new_pcm(rtd, num); if (ret < 0) { -- 1.7.1

3 6

[alsa-devel] [PATCH V2] sound: usb: USB3 SuperSpeed sound support
by Paul Zimmerman 14 Aug '10

14 Aug '10

This is V2 of the patch, after feedback from Clemens and Daniel. This patch adds SuperSpeed support to the USB drivers under sound/. It adds tests for USB_SPEED_SUPER to the appropriate places that check for the USB speed. This patch has been tested with our SS USB3 device emulating a set of Yamaha speakers and a Logitech microphone, but with the descriptors modified to add USB3 support. It has also been tested with the real speakers and microphone, to make sure that USB2 devices still work. Signed-off-by: Paul Zimmerman <paulz(a)synopsys.com> Cc: Takashi Iwai <tiwai(a)suse.de> Cc: Clemens Ladisch <clemens(a)ladisch.de> Cc: Daniel Mack <daniel(a)caiaq.de> Cc: Greg Kroah-Hartman <gregkh(a)suse.de> --- sound/usb/card.c | 31 +++++++++++++++++++++++-------- sound/usb/helper.c | 17 +++++++++++------ sound/usb/midi.c | 9 ++++++++- sound/usb/pcm.c | 4 ++-- sound/usb/proc.c | 2 +- sound/usb/urb.c | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index 7a8ac1d..6c49763 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -299,9 +299,13 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx, *rchip = NULL; - if (snd_usb_get_speed(dev) != USB_SPEED_LOW && - snd_usb_get_speed(dev) != USB_SPEED_FULL && - snd_usb_get_speed(dev) != USB_SPEED_HIGH) { + switch (snd_usb_get_speed(dev)) { + case USB_SPEED_LOW: + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + case USB_SPEED_SUPER: + break; + default: snd_printk(KERN_ERR "unknown device speed %d\n", snd_usb_get_speed(dev)); return -ENXIO; } @@ -377,11 +381,22 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx, if (len < sizeof(card->longname)) usb_make_path(dev, card->longname + len, sizeof(card->longname) - len); - strlcat(card->longname, - snd_usb_get_speed(dev) == USB_SPEED_LOW ? ", low speed" : - snd_usb_get_speed(dev) == USB_SPEED_FULL ? ", full speed" : - ", high speed", - sizeof(card->longname)); + switch (snd_usb_get_speed(dev)) { + case USB_SPEED_LOW: + strlcat(card->longname, ", low speed", sizeof(card->longname)); + break; + case USB_SPEED_FULL: + strlcat(card->longname, ", full speed", sizeof(card->longname)); + break; + case USB_SPEED_HIGH: + strlcat(card->longname, ", high speed", sizeof(card->longname)); + break; + case USB_SPEED_SUPER: + strlcat(card->longname, ", super speed", sizeof(card->longname)); + break; + default: + break; + } snd_usb_audio_create_proc(chip); diff --git a/sound/usb/helper.c b/sound/usb/helper.c index d48d6f8..f280c19 100644 --- a/sound/usb/helper.c +++ b/sound/usb/helper.c @@ -103,11 +103,16 @@ int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe, __u8 request, unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip, struct usb_host_interface *alts) { - if (snd_usb_get_speed(chip->dev) == USB_SPEED_HIGH && - get_endpoint(alts, 0)->bInterval >= 1 && - get_endpoint(alts, 0)->bInterval <= 4) - return get_endpoint(alts, 0)->bInterval - 1; - else - return 0; + switch (snd_usb_get_speed(chip->dev)) { + case USB_SPEED_HIGH: + case USB_SPEED_SUPER: + if (get_endpoint(alts, 0)->bInterval >= 1 && + get_endpoint(alts, 0)->bInterval <= 4) + return get_endpoint(alts, 0)->bInterval - 1; + break; + default: + break; + } + return 0; } diff --git a/sound/usb/midi.c b/sound/usb/midi.c index 4678564..6b42ce6 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -834,7 +834,14 @@ static void snd_usbmidi_us122l_output(struct snd_usb_midi_out_endpoint *ep, if (!ep->ports[0].active) return; - count = snd_usb_get_speed(ep->umidi->dev) == USB_SPEED_HIGH ? 1 : 2; + switch (snd_usb_get_speed(ep->umidi->dev)) { + case USB_SPEED_HIGH: + case USB_SPEED_SUPER: + count = 1; + break; + default: + count = 2; + } count = snd_rawmidi_transmit(ep->ports[0].substream, urb->transfer_buffer, count); diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 4568298..ebd09ac 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -467,7 +467,7 @@ static int hw_check_valid_format(struct snd_usb_substream *subs, return 0; } /* check whether the period time is >= the data packet interval */ - if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH) { + if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) { ptime = 125 * (1 << fp->datainterval); if (ptime > pt->max || (ptime == pt->max && pt->openmax)) { hwc_debug(" > check: ptime %u > max %u\n", ptime, pt->max); @@ -735,7 +735,7 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre } param_period_time_if_needed = SNDRV_PCM_HW_PARAM_PERIOD_TIME; - if (snd_usb_get_speed(subs->dev) != USB_SPEED_HIGH) + if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) /* full speed devices have fixed data packet interval */ ptmin = 1000; if (ptmin == 1000) diff --git a/sound/usb/proc.c b/sound/usb/proc.c index f5e3f35..3c650ab 100644 --- a/sound/usb/proc.c +++ b/sound/usb/proc.c @@ -107,7 +107,7 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s } snd_iprintf(buffer, "\n"); } - if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH) + if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) snd_iprintf(buffer, " Data packet interval: %d us\n", 125 * (1 << fp->datainterval)); // snd_iprintf(buffer, " Max Packet Size = %d\n", fp->maxpacksize); diff --git a/sound/usb/urb.c b/sound/usb/urb.c index de607d4..8deeaad 100644 --- a/sound/usb/urb.c +++ b/sound/usb/urb.c @@ -244,7 +244,7 @@ int snd_usb_init_substream_urbs(struct snd_usb_substream *subs, else subs->curpacksize = maxsize; - if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH) + if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) packs_per_ms = 8 >> subs->datainterval; else packs_per_ms = 1; -- Paul

2 1

Re: [alsa-devel] intel 8x0 ALSA driver in virtualbox - choppy sound
by Takashi Iwai 13 Aug '10

13 Aug '10

At Fri, 13 Aug 2010 17:37:33 +0100, Lex F wrote: > > Hi > > Thanks for your reply. I tried to answer your questions below. > > On 13 August 2010 17:06, Takashi Iwai <tiwai(a)suse.de> wrote: > > We have had many problems with VMware, too :) > > Which sound backend are you using? Direct ALSA / dmix or PA? > > I believe it's direct ALSA, I have choppy output even with > aplay /usr/share/sounds/alsa/*.wav It doesn't mean always that you use direct ALSA. Try to pass -Dplughw option to aplay. > > Actually, there is no real interrupt, but just the virtual one, > > thus it can be never accurate. So, rather the question is how the > > driver is tolerant for sloppy IRQ updates. > > > > Usually, when the period size is large and the buffer have many > > periods (not two), the delayed update works more stably. > > I am afraid I don't understand this :) The comment above is rather to Jaroslav. > I am compiling a kernel with the following options enabled: > CONFIG_SND_PCM_XRUN_DEBUG, CONFIG_SND_VERBOSE_PROCFS, > CONFIG_SND_DEBUG > > Would any of these help to determine the cause and suggest a fix? Fix VirtualBox :) Or try to set xrun_debug and check kernel log as Jaroslav wrote. Takashi

2 1

[alsa-devel] n810 diablo and alsa ?
by John Simpson 13 Aug '10

13 Aug '10

Is there a how-to for installing the alsa-lib correctly on the n810? (hopefully from a fresh install of Maemo/Diablo?) I've been hitting brick walls in every direction. :-( The alsa-lib in the diablo repository seems to be outdated: [1|user@tablet|~/src]cat alsa-lib_1.0.14sa-2maemo2.dsc Format: 1.0 Source: alsa-lib Version: 1.0.14sa-2maemo2 Binary: lib32asound2-dev, lib64asound2, lib32asound2, libasound2-dev, libasound2, libasound2-doc, libasound2-dbg, lib64asound2-dev Maintainer: Debian ALSA Maintainers <pkg-alsa-devel(a)lists.alioth.debian.org> Architecture: any Standards-Version: 3.7.2 Build-Depends: debhelper (>= 4.2.32), quilt (>= 0.40), autotools-dev, doxygen, libc6-dev-powerpc [ppc64], libc6-dev-i386 [amd64], libc6-dev-ppc64 [powerpc], libc6-dev-s390x [s390], libc6-dev-sparc64 [sparc], lib32gcc1 [amd64 ppc64], libc6-dev (>= 2.5) [armel] Vcs-Browser: http://svn.debian.org/wsvn/pkg-alsa/trunk/alsa-lib/ Uploaders: Jordi Mallach <jordi(a)debian.org>, Mikael Magnusson <mikma(a)users.sourceforge.net>, Elimar Riesebieter <riesebie(a)lxtec.de>, Marc-Andre Lureau <marc-andre.lureau(a)nokia.com> Vcs-Svn: svn://svn.debian.org/pkg-alsa/trunk/alsa-lib

2 2

Re: [alsa-devel] intel 8x0 ALSA driver in virtualbox - choppy sound
by Lex F 13 Aug '10

13 Aug '10

Hi Thanks for your reply. I tried to answer your questions below. On 13 August 2010 17:06, Takashi Iwai <tiwai(a)suse.de> wrote: > We have had many problems with VMware, too :) > Which sound backend are you using? Direct ALSA / dmix or PA? I believe it's direct ALSA, I have choppy output even with aplay /usr/share/sounds/alsa/*.wav > Actually, there is no real interrupt, but just the virtual one, > thus it can be never accurate. So, rather the question is how the > driver is tolerant for sloppy IRQ updates. > > Usually, when the period size is large and the buffer have many > periods (not two), the delayed update works more stably. I am afraid I don't understand this :) I am compiling a kernel with the following options enabled: CONFIG_SND_PCM_XRUN_DEBUG, CONFIG_SND_VERBOSE_PROCFS, CONFIG_SND_DEBUG Would any of these help to determine the cause and suggest a fix? Lex

2 2

[alsa-devel] [PATCH 3/5] ASoC: update setting for pxa ssp slave mode
by Haojian Zhuang 13 Aug '10

13 Aug '10

2 1

[alsa-devel] ASoC updates for 2.6.36
by Mark Brown 13 Aug '10

13 Aug '10

The following changes since commit 2e2211a387e70c62e1249822a94f4a33933ecd62: ASoC: add AD1980 obsolete information (2010-08-10 15:43:45 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.36 A couple of focused patches for the WM8994, plus the MAINTAINERS additions. They're not 100% ASoC but mostly so by volume of code covered so hopefully not a problem for you to take via your tree - let me know if it's an issue and I'll drop them. Mark Brown (4): ASoC: Optimise DSP performance for WM8994 ASoC: Only tweak WM8994 chip configuration on devices up to rev D MAINTAINERS: Make Wolfson entry also cover CODEC drivers MAINTAINERS: Add Ian Lartey as comaintaner for Wolfson devices MAINTAINERS | 7 ++++--- sound/soc/codecs/wm8994.c | 23 +++++++++++++++-------- 2 files changed, 19 insertions(+), 11 deletions(-)

2 1

[alsa-devel] [PATCH 5/5] ASoc: add machine driver for 88pm860x
by Haojian Zhuang 13 Aug '10

13 Aug '10

2 3

[alsa-devel] [PATCH 4/5] ASoC: add 88pm860x codec driver
by Haojian Zhuang 13 Aug '10

13 Aug '10

2 3

[alsa-devel] alsa-lib: Rate conversion broken for non-S16?
by Mark Hills 13 Aug '10

13 Aug '10

I have a device (snd-usb-caiaq) whose native sample format is S24_3BE. When sample rate conversion is used, the audio becomes near silent, distorted, and only in the left channel. It is reproducable with aplay (see example below). Recording is not affected. Playback is correct if only format conversion is used. It looks something is causing the incorrect put function to be used by the rate conversion. I traced it to linear_expand() and others, alsa-lib-src/pcm_rate_linear.c. Forcing the function to put S16 format into the destination buffer allows, suprisingly, the sound to be heard correctly and at full volume from both aplay and xwax: if (rate->put_idx == 10) rate->put_idx = 6 I suspected that linear_init() is looking in the wrong place to choose the attributes for the rate conversion. After some time spent I cannot see it. But is there any reason that the output buffer for the rate conversion would not be in S24_3BE? And for the rate conversion to be misinformed? $ uname -s -r -v -p -i -m Linux 2.6.34.1-mh #83 SMP PREEMPT Wed Jul 21 23:25:33 BST 2010 i686 pentium4 i386 $ alsacap Card 0, ID `Audio8DJ', name `Audio 8 DJ' Device 0, ID `Audio 8 DJ', name `Audio 8 DJ', 4 subdevices (4 available) 2 channels, sampling rate 44100..96000 Hz Sample formats: S24_3BE Subdevice 0, name `subdevice #0' Subdevice 1, name `subdevice #1' Subdevice 2, name `subdevice #2' Subdevice 3, name `subdevice #3' $ aplay -v -D plughw:Audio8DJ,0,0 halcyon-24000.wav Playing WAVE 'halcyon-24000.wav' : Signed 16 bit Little Endian, Rate 24000 Hz, Stereo Plug PCM: Rate conversion PCM (48000, sformat=S24_3BE) Converter: linear-interpolation Protocol version: 10002 Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 24000 exact rate : 24000 (24000/1) msbits : 16 buffer_size : 10922 period_size : 2730 period_time : 113770 tstamp_mode : NONE period_step : 1 avail_min : 2730 period_event : 0 start_threshold : 10922 stop_threshold : 10922 silence_threshold: 0 silence_size : 0 boundary : 715784192 Slave: Hardware PCM card 0 'Audio 8 DJ' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S24_3BE subformat : STD channels : 2 rate : 48000 exact rate : 48000 (48000/1) msbits : 24 buffer_size : 21845 period_size : 5461 period_time : 113770 tstamp_mode : NONE period_step : 1 avail_min : 5461 period_event : 0 start_threshold : 21844 stop_threshold : 21845 silence_threshold: 0 silence_size : 0 boundary : 1431633920 appl_ptr : 0 hw_ptr : 0 -- Mark

2 6

[alsa-devel] [PATCH 0/5] ASoc: support 88pm860x codec driver
by Haojian Zhuang 13 Aug '10

13 Aug '10

Add 88pm860x codec driver. This series patch is based on ASoC for-2.6.37 branch. Thanks Haojian

2 1

[alsa-devel] [PATCH] ISA: New Aztech Sound Galaxy driver
by René Herman 13 Aug '10

13 Aug '10

Hi Takashi. I've dusted of the snd-galaxy Aztech Sound Galaxy driver that I posted back in 2007. Have not been around for a long time but found some time again currently. Earlier this year I was contacted about the driver so there's still at least some demand for it. It is the same version as posted way back then: http://www.spinics.net/lists/alsa-devel/msg09791.html only brought up to date to 2.6.35, and with lib.c folded back in to fix the remaining problem from the earlier post. It's also been tested again on all previously tested cards and two new ones. Everything still found working. More information in the changelog accompanying the patch below. Cleaning up and moving AZT2320 to the galaxy directory as well would be a next step, as would removing the old sgalaxy driver. The patch has been generated against 2.6.35 and I've just now checked that it applies cleanly to current git. Hope that'll do since I'm not really setup to work against alsa-driver or anything. When updating the driver I noticed fairly little seems to have happened inside sound/isa anyway over the last few years, so I assumed it would be okay. Hope it can be applied as is, but I have some time to deal with problems currently. @ Ram: Do you even still have the card? ;-) Regards, Rene

2 4

[alsa-devel] [PATCH 1/4] ASoC: Optimise DSP performance for WM8994
by Mark Brown 13 Aug '10

13 Aug '10

Change the chip defaults to optimise performance of some of the DSP functionality. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index a87046a..2dc9daa 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3082,10 +3082,11 @@ static int wm8994_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_STANDBY: if (codec->bias_level == SND_SOC_BIAS_OFF) { - /* Tweak DC servo configuration for improved - * performance. */ + /* Tweak DC servo and DSP configuration for + * improved performance. */ snd_soc_write(codec, 0x102, 0x3); snd_soc_write(codec, 0x56, 0x3); + snd_soc_write(codec, 0x817, 0); snd_soc_write(codec, 0x102, 0); /* Discharge LINEOUT1 & 2 */ -- 1.7.1

2 4

[PATCH 2/5] ASoC: fix pxa2xx-pcm.h path
by Haojian Zhuang 13 Aug '10

13 Aug '10

Since pxa2xx-pcm.h is removed from sound/soc/pxa, we need to update the path in related files. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/pxa-ssp.c | 2 +- sound/soc/pxa/pxa2xx-pcm.c | 1 - 2 files changed, 1 insertions(+), 2 deletions(-) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 99d80e8..c4f480d 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -35,7 +35,7 @@ #include <mach/audio.h> #include <plat/ssp.h> -#include "pxa2xx-pcm.h" +#include "../../arm/pxa2xx-pcm.h" #include "pxa-ssp.h" /* diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c index 5127044..02fb664 100644 --- a/sound/soc/pxa/pxa2xx-pcm.c +++ b/sound/soc/pxa/pxa2xx-pcm.c @@ -16,7 +16,6 @@ #include <sound/soc.h> #include <sound/pxa2xx-lib.h> -#include "pxa2xx-pcm.h" #include "../../arm/pxa2xx-pcm.h" static int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, -- 1.5.6.5

1 0

[alsa-devel] [PATCH 1/5] ASoC: Remove -dai suffix from Samsung DAI devices
by Mark Brown 13 Aug '10

13 Aug '10

The IP blocks are all fixed function audio controllers so there's no need to dedupe against other usages and the corresponding arch/arm updates got missed anyway so revert to the original names for the drivers. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/s3c24xx/aquila_wm8994.c | 2 +- sound/soc/s3c24xx/goni_wm8994.c | 2 +- sound/soc/s3c24xx/jive_wm8750.c | 2 +- sound/soc/s3c24xx/ln2440sbc_alc650.c | 2 +- sound/soc/s3c24xx/neo1973_gta02_wm8753.c | 2 +- sound/soc/s3c24xx/neo1973_wm8753.c | 2 +- sound/soc/s3c24xx/s3c2412-i2s.c | 2 +- sound/soc/s3c24xx/s3c24xx-i2s.c | 2 +- sound/soc/s3c24xx/s3c24xx_simtec_hermes.c | 2 +- sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c | 2 +- sound/soc/s3c24xx/s3c24xx_uda134x.c | 2 +- sound/soc/s3c24xx/s3c64xx-i2s-v4.c | 2 +- sound/soc/s3c24xx/s3c64xx-i2s.c | 2 +- sound/soc/s3c24xx/smartq_wm8987.c | 2 +- sound/soc/s3c24xx/smdk64xx_wm8580.c | 4 ++-- 15 files changed, 16 insertions(+), 16 deletions(-) diff --git a/sound/soc/s3c24xx/aquila_wm8994.c b/sound/soc/s3c24xx/aquila_wm8994.c index 44b06e9..235d197 100644 --- a/sound/soc/s3c24xx/aquila_wm8994.c +++ b/sound/soc/s3c24xx/aquila_wm8994.c @@ -233,7 +233,7 @@ static struct snd_soc_dai_link aquila_dai[] = { { .name = "WM8994", .stream_name = "WM8994 HiFi", - .cpu_dai_name = "s3c64xx-i2s-v4-dai", + .cpu_dai_name = "s3c64xx-i2s-v4", .codec_dai_name = "wm8994-hifi", .platform_name = "s3c24xx-pcm-audio", .codec_name = "wm8994-codec.0-0x1a", diff --git a/sound/soc/s3c24xx/goni_wm8994.c b/sound/soc/s3c24xx/goni_wm8994.c index 6ada34e..694f702 100644 --- a/sound/soc/s3c24xx/goni_wm8994.c +++ b/sound/soc/s3c24xx/goni_wm8994.c @@ -236,7 +236,7 @@ static struct snd_soc_dai_link goni_dai[] = { { .name = "WM8994", .stream_name = "WM8994 HiFi", - .cpu_dai_name = "s3c64xx-i2s-v4-dai", + .cpu_dai_name = "s3c64xx-i2s-v4", .codec_dai_name = "wm8994-hifi", .platform_name = "s3c24xx-pcm-audio", .codec_name = "wm8994-codec.0-0x1a", diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c index 61e3067..49605cd 100644 --- a/sound/soc/s3c24xx/jive_wm8750.c +++ b/sound/soc/s3c24xx/jive_wm8750.c @@ -139,7 +139,7 @@ static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd) static struct snd_soc_dai_link jive_dai = { .name = "wm8750", .stream_name = "WM8750", - .cpu_dai_name = "s3c2412-i2s-dai", + .cpu_dai_name = "s3c2412-i2s", .codec_dai_name = "wm8750-hifi", .platform_name = "s3c24xx-pcm-audio", .codec_name = "wm8750-codec.0-0x1a", diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c index ef234c7..abe64ab 100644 --- a/sound/soc/s3c24xx/ln2440sbc_alc650.c +++ b/sound/soc/s3c24xx/ln2440sbc_alc650.c @@ -32,7 +32,7 @@ static struct snd_soc_dai_link ln2440sbc_dai[] = { { .name = "AC97", .stream_name = "AC97 HiFi", - .cpu_dai_name = "s3c-ac97-dai", + .cpu_dai_name = "s3c-ac97", .codec_dai_name = "ac97-hifi", .codec_name = "ac97-codec", .platform_name = "s3c24xx-pcm-audio", diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c index be1e81c..c457bfd 100644 --- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c @@ -397,7 +397,7 @@ static struct snd_soc_dai_link neo1973_gta02_dai[] = { { /* Hifi Playback - for similatious use with voice below */ .name = "WM8753", .stream_name = "WM8753 HiFi", - .cpu_dai_name = "s3c24xx-i2s-dai", + .cpu_dai_name = "s3c24xx-i2s", .codec_dai_name = "wm8753-hifi", .init = neo1973_gta02_wm8753_init, .platform_name = "s3c24xx-pcm-audio", diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 8b5472e..d7a39a0 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -557,7 +557,7 @@ static struct snd_soc_dai_link neo1973_dai[] = { .name = "WM8753", .stream_name = "WM8753 HiFi", .platform_name = "s3c24xx-pcm-audio", - .cpu_dai_name = "s3c24xx-i2s-dai", + .cpu_dai_name = "s3c24xx-i2s", .codec_dai_name = "wm8753-hifi", .codec_name = "wm8753-codec.0-0x1a", .init = neo1973_wm8753_init, diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c index aa116f6..acd0096 100644 --- a/sound/soc/s3c24xx/s3c2412-i2s.c +++ b/sound/soc/s3c24xx/s3c2412-i2s.c @@ -188,7 +188,7 @@ static struct platform_driver s3c2412_iis_driver = { .probe = s3c2412_iis_dev_probe, .remove = s3c2412_iis_dev_remove, .driver = { - .name = "s3c2412-iis-dai", + .name = "s3c2412-iis", .owner = THIS_MODULE, }, }; diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index a6cbeef..1d0bade 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -495,7 +495,7 @@ static struct platform_driver s3c24xx_iis_driver = { .probe = s3c24xx_iis_dev_probe, .remove = s3c24xx_iis_dev_remove, .driver = { - .name = "s3c24xx-iis-dai", + .name = "s3c24xx-iis", .owner = THIS_MODULE, }, }; diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c index 00ead0d..f884537 100644 --- a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c +++ b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c @@ -97,7 +97,7 @@ static struct snd_soc_dai_link simtec_dai_aic33 = { .name = "tlv320aic33", .stream_name = "TLV320AIC33", .codec_name = "tlv320aic3x-codec.0-0x1a", - .cpu_dai_name = "s3c24xx-i2s-dai", + .cpu_dai_name = "s3c24xx-i2s", .codec_dai_name = "tlv320aic3x-hifi", .platform_name = "s3c24xx-pcm-audio", .init = simtec_hermes_init, diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c index 4ee4412..c096759 100644 --- a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c +++ b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c @@ -86,7 +86,7 @@ static struct snd_soc_dai_link simtec_dai_aic23 = { .name = "tlv320aic23", .stream_name = "TLV320AIC23", .codec_name = "tlv320aic3x-codec.0-0x1a", - .cpu_dai_name = "s3c24xx-i2s-dai", + .cpu_dai_name = "s3c24xx-i2s", .codec_dai_name = "tlv320aic3x-hifi", .platform_name = "s3c24xx-pcm-audio", .init = simtec_tlv320aic23_init, diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c index 7d049ed..bd48ffb 100644 --- a/sound/soc/s3c24xx/s3c24xx_uda134x.c +++ b/sound/soc/s3c24xx/s3c24xx_uda134x.c @@ -229,7 +229,7 @@ static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = { .stream_name = "UDA134X", .codec_name = "uda134x-hifi", .codec_dai_name = "uda134x-hifi", - .cpu_dai_name = "s3c24xx-i2s-dai", + .cpu_dai_name = "s3c24xx-i2s", .ops = &s3c24xx_uda134x_ops, .platform_name = "s3c24xx-pcm-audio", }; diff --git a/sound/soc/s3c24xx/s3c64xx-i2s-v4.c b/sound/soc/s3c24xx/s3c64xx-i2s-v4.c index 885040b..7cab4fc 100644 --- a/sound/soc/s3c24xx/s3c64xx-i2s-v4.c +++ b/sound/soc/s3c24xx/s3c64xx-i2s-v4.c @@ -195,7 +195,7 @@ static struct platform_driver s3c64xx_i2sv4_driver = { .probe = s3c64xx_i2sv4_dev_probe, .remove = s3c64xx_i2sv4_dev_remove, .driver = { - .name = "s3c64xx-iis-v4-dai", + .name = "s3c64xx-iis-v4", .owner = THIS_MODULE, }, }; diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c index 161189b..a1d0b25 100644 --- a/sound/soc/s3c24xx/s3c64xx-i2s.c +++ b/sound/soc/s3c24xx/s3c64xx-i2s.c @@ -218,7 +218,7 @@ static struct platform_driver s3c64xx_iis_driver = { .probe = s3c64xx_iis_dev_probe, .remove = s3c64xx_iis_dev_remove, .driver = { - .name = "s3c64xx-iis-dai", + .name = "s3c64xx-iis", .owner = THIS_MODULE, }, }; diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/s3c24xx/smartq_wm8987.c index a908055..dd20ca7 100644 --- a/sound/soc/s3c24xx/smartq_wm8987.c +++ b/sound/soc/s3c24xx/smartq_wm8987.c @@ -211,7 +211,7 @@ static struct snd_soc_dai_link smartq_dai[] = { { .name = "wm8987", .stream_name = "SmartQ Hi-Fi", - .cpu_dai_name = "s3c64xx-i2s-dai.0", + .cpu_dai_name = "s3c64xx-i2s.0", .codec_dai_name = "wm8750-hifi", .platform_name = "s3c24xx-pcm-audio", .codec_name = "wm8750-codec.0-0x1a", diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c index 9d959a0..5c21e26 100644 --- a/sound/soc/s3c24xx/smdk64xx_wm8580.c +++ b/sound/soc/s3c24xx/smdk64xx_wm8580.c @@ -223,7 +223,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = { { /* Primary Playback i/f */ .name = "WM8580 PAIF RX", .stream_name = "Playback", - .cpu_dai_name = "s3c64xx-i2s-v4-dai", + .cpu_dai_name = "s3c64xx-iis-v4", .codec_dai_name = "wm8580-hifi-playback", .platform_name = "s3c24xx-pcm-audio", .codec_name = "wm8580-codec.0-001b", @@ -233,7 +233,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = { { /* Primary Capture i/f */ .name = "WM8580 PAIF TX", .stream_name = "Capture", - .cpu_dai_name = "s3c64xx-i2s-v4-dai", + .cpu_dai_name = "s3c64xx-iis-v4", .codec_dai_name = "wm8580-hifi-capture", .platform_name = "s3c24xx-pcm-audio", .codec_name = "wm8580-codec.0-001b", -- 1.7.1

5 13

[PATCH] ISA: Remove snd-sgalaxy
by René Herman 13 Aug '10

13 Aug '10

Its hardware is handled more fully by the new azt1605/azt2316 drivers. Signed-off-by: Rene Herman <rene.herman(a)gmail.com> --- Documentation/kernel-parameters.txt | 2 - Documentation/sound/alsa/ALSA-Configuration.txt | 14 - arch/powerpc/configs/ppc6xx_defconfig | 1 - sound/isa/Kconfig | 10 - sound/isa/Makefile | 2 - sound/isa/sgalaxy.c | 369 ----------------------- 6 files changed, 0 insertions(+), 398 deletions(-) delete mode 100644 sound/isa/sgalaxy.c diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2b2407d..4df51c8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2484,8 +2484,6 @@ and is between 256 and 4096 characters. It is defined in the file snd-serial= [HW,ALSA] - snd-sgalaxy= [HW,ALSA] - snd-sonicvibes= [HW,ALSA] snd-sun-amd7930= diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 52f6725..797040d 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1709,20 +1709,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This card is also known as Audio Excel DSP 16 or Zoltrix AV302. - Module snd-sgalaxy - ------------------ - - Module for Aztech Sound Galaxy sound card. - - sbport - Port # for SB16 interface (0x220,0x240) - wssport - Port # for WSS interface (0x530,0xe80,0xf40,0x604) - irq - IRQ # (7,9,10,11) - dma1 - DMA # - - This module supports multiple cards. - - The power-management is supported. - Module snd-sscape ----------------- diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 12dc7c4..ba7bef1 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -2573,7 +2573,6 @@ CONFIG_SND_ISA=y # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set -# CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # CONFIG_SND_WAVEFRONT is not set CONFIG_SND_PCI=y diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index f9aa13d..52064cf 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -377,16 +377,6 @@ config SND_SB16_CSP coprocessor can do variable tasks like various compression and decompression algorithms. -config SND_SGALAXY - tristate "Aztech Sound Galaxy" - select SND_WSS_LIB - help - Say Y here to include support for Aztech Sound Galaxy - soundcards. - - To compile this driver as a module, choose M here: the module - will be called snd-sgalaxy. - config SND_SSCAPE tristate "Ensoniq SoundScape driver" select SND_MPU401_UART diff --git a/sound/isa/Makefile b/sound/isa/Makefile index d2bd8f5..8d781e4 100644 --- a/sound/isa/Makefile +++ b/sound/isa/Makefile @@ -10,7 +10,6 @@ snd-cmi8330-objs := cmi8330.o snd-es18xx-objs := es18xx.o snd-opl3sa2-objs := opl3sa2.o snd-sc6000-objs := sc6000.o -snd-sgalaxy-objs := sgalaxy.o snd-sscape-objs := sscape.o # Toplevel Module Dependency @@ -21,7 +20,6 @@ obj-$(CONFIG_SND_CMI8330) += snd-cmi8330.o obj-$(CONFIG_SND_ES18XX) += snd-es18xx.o obj-$(CONFIG_SND_OPL3SA2) += snd-opl3sa2.o obj-$(CONFIG_SND_SC6000) += snd-sc6000.o -obj-$(CONFIG_SND_SGALAXY) += snd-sgalaxy.o obj-$(CONFIG_SND_SSCAPE) += snd-sscape.o obj-$(CONFIG_SND) += ad1816a/ ad1848/ cs423x/ es1688/ galaxy/ gus/ msnd/ opti9xx/ \ diff --git a/sound/isa/sgalaxy.c b/sound/isa/sgalaxy.c deleted file mode 100644 index 6fe27b9..0000000 --- a/sound/isa/sgalaxy.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * Driver for Aztech Sound Galaxy cards - * Copyright (c) by Christopher Butler <chrisb(a)sandy.force9.co.uk. - * - * I don't have documentation for this card, I based this driver on the - * driver for OSS/Free included in the kernel source (drivers/sound/sgalaxy.c) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/init.h> -#include <linux/err.h> -#include <linux/isa.h> -#include <linux/delay.h> -#include <linux/time.h> -#include <linux/interrupt.h> -#include <linux/moduleparam.h> -#include <asm/dma.h> -#include <sound/core.h> -#include <sound/sb.h> -#include <sound/wss.h> -#include <sound/control.h> -#define SNDRV_LEGACY_FIND_FREE_IRQ -#define SNDRV_LEGACY_FIND_FREE_DMA -#include <sound/initval.h> - -MODULE_AUTHOR("Christopher Butler <chrisb(a)sandy.force9.co.uk>"); -MODULE_DESCRIPTION("Aztech Sound Galaxy"); -MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("{{Aztech Systems,Sound Galaxy}}"); - -static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ -static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ -static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */ -static long sbport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220,0x240 */ -static long wssport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x530,0xe80,0xf40,0x604 */ -static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 7,9,10,11 */ -static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 0,1,3 */ - -module_param_array(index, int, NULL, 0444); -MODULE_PARM_DESC(index, "Index value for Sound Galaxy soundcard."); -module_param_array(id, charp, NULL, 0444); -MODULE_PARM_DESC(id, "ID string for Sound Galaxy soundcard."); -module_param_array(sbport, long, NULL, 0444); -MODULE_PARM_DESC(sbport, "Port # for Sound Galaxy SB driver."); -module_param_array(wssport, long, NULL, 0444); -MODULE_PARM_DESC(wssport, "Port # for Sound Galaxy WSS driver."); -module_param_array(irq, int, NULL, 0444); -MODULE_PARM_DESC(irq, "IRQ # for Sound Galaxy driver."); -module_param_array(dma1, int, NULL, 0444); -MODULE_PARM_DESC(dma1, "DMA1 # for Sound Galaxy driver."); - -#define SGALAXY_AUXC_LEFT 18 -#define SGALAXY_AUXC_RIGHT 19 - -#define PFX "sgalaxy: " - -/* - - */ - -#define AD1848P1( port, x ) ( port + c_d_c_AD1848##x ) - -/* from lowlevel/sb/sb.c - to avoid having to allocate a struct snd_sb for the */ -/* short time we actually need it.. */ - -static int snd_sgalaxy_sbdsp_reset(unsigned long port) -{ - int i; - - outb(1, SBP1(port, RESET)); - udelay(10); - outb(0, SBP1(port, RESET)); - udelay(30); - for (i = 0; i < 1000 && !(inb(SBP1(port, DATA_AVAIL)) & 0x80); i++); - if (inb(SBP1(port, READ)) != 0xaa) { - snd_printd("sb_reset: failed at 0x%lx!!!\n", port); - return -ENODEV; - } - return 0; -} - -static int __devinit snd_sgalaxy_sbdsp_command(unsigned long port, - unsigned char val) -{ - int i; - - for (i = 10000; i; i--) - if ((inb(SBP1(port, STATUS)) & 0x80) == 0) { - outb(val, SBP1(port, COMMAND)); - return 1; - } - - return 0; -} - -static irqreturn_t snd_sgalaxy_dummy_interrupt(int irq, void *dev_id) -{ - return IRQ_NONE; -} - -static int __devinit snd_sgalaxy_setup_wss(unsigned long port, int irq, int dma) -{ - static int interrupt_bits[] = {-1, -1, -1, -1, -1, -1, -1, 0x08, -1, - 0x10, 0x18, 0x20, -1, -1, -1, -1}; - static int dma_bits[] = {1, 2, 0, 3}; - int tmp, tmp1; - - if ((tmp = inb(port + 3)) == 0xff) - { - snd_printdd("I/O address dead (0x%lx)\n", port); - return 0; - } -#if 0 - snd_printdd("WSS signature = 0x%x\n", tmp); -#endif - - if ((tmp & 0x3f) != 0x04 && - (tmp & 0x3f) != 0x0f && - (tmp & 0x3f) != 0x00) { - snd_printdd("No WSS signature detected on port 0x%lx\n", - port + 3); - return 0; - } - -#if 0 - snd_printdd(PFX "setting up IRQ/DMA for WSS\n"); -#endif - - /* initialize IRQ for WSS codec */ - tmp = interrupt_bits[irq % 16]; - if (tmp < 0) - return -EINVAL; - - if (request_irq(irq, snd_sgalaxy_dummy_interrupt, IRQF_DISABLED, "sgalaxy", NULL)) { - snd_printk(KERN_ERR "sgalaxy: can't grab irq %d\n", irq); - return -EIO; - } - - outb(tmp | 0x40, port); - tmp1 = dma_bits[dma % 4]; - outb(tmp | tmp1, port); - - free_irq(irq, NULL); - - return 0; -} - -static int __devinit snd_sgalaxy_detect(int dev, int irq, int dma) -{ -#if 0 - snd_printdd(PFX "switching to WSS mode\n"); -#endif - - /* switch to WSS mode */ - snd_sgalaxy_sbdsp_reset(sbport[dev]); - - snd_sgalaxy_sbdsp_command(sbport[dev], 9); - snd_sgalaxy_sbdsp_command(sbport[dev], 0); - - udelay(400); - return snd_sgalaxy_setup_wss(wssport[dev], irq, dma); -} - -static struct snd_kcontrol_new snd_sgalaxy_controls[] = { -WSS_DOUBLE("Aux Playback Switch", 0, - SGALAXY_AUXC_LEFT, SGALAXY_AUXC_RIGHT, 7, 7, 1, 1), -WSS_DOUBLE("Aux Playback Volume", 0, - SGALAXY_AUXC_LEFT, SGALAXY_AUXC_RIGHT, 0, 0, 31, 0) -}; - -static int __devinit snd_sgalaxy_mixer(struct snd_wss *chip) -{ - struct snd_card *card = chip->card; - struct snd_ctl_elem_id id1, id2; - unsigned int idx; - int err; - - memset(&id1, 0, sizeof(id1)); - memset(&id2, 0, sizeof(id2)); - id1.iface = id2.iface = SNDRV_CTL_ELEM_IFACE_MIXER; - /* reassign AUX0 to LINE */ - strcpy(id1.name, "Aux Playback Switch"); - strcpy(id2.name, "Line Playback Switch"); - if ((err = snd_ctl_rename_id(card, &id1, &id2)) < 0) - return err; - strcpy(id1.name, "Aux Playback Volume"); - strcpy(id2.name, "Line Playback Volume"); - if ((err = snd_ctl_rename_id(card, &id1, &id2)) < 0) - return err; - /* reassign AUX1 to FM */ - strcpy(id1.name, "Aux Playback Switch"); id1.index = 1; - strcpy(id2.name, "FM Playback Switch"); - if ((err = snd_ctl_rename_id(card, &id1, &id2)) < 0) - return err; - strcpy(id1.name, "Aux Playback Volume"); - strcpy(id2.name, "FM Playback Volume"); - if ((err = snd_ctl_rename_id(card, &id1, &id2)) < 0) - return err; - /* build AUX2 input */ - for (idx = 0; idx < ARRAY_SIZE(snd_sgalaxy_controls); idx++) { - err = snd_ctl_add(card, - snd_ctl_new1(&snd_sgalaxy_controls[idx], chip)); - if (err < 0) - return err; - } - return 0; -} - -static int __devinit snd_sgalaxy_match(struct device *devptr, unsigned int dev) -{ - if (!enable[dev]) - return 0; - if (sbport[dev] == SNDRV_AUTO_PORT) { - snd_printk(KERN_ERR PFX "specify SB port\n"); - return 0; - } - if (wssport[dev] == SNDRV_AUTO_PORT) { - snd_printk(KERN_ERR PFX "specify WSS port\n"); - return 0; - } - return 1; -} - -static int __devinit snd_sgalaxy_probe(struct device *devptr, unsigned int dev) -{ - static int possible_irqs[] = {7, 9, 10, 11, -1}; - static int possible_dmas[] = {1, 3, 0, -1}; - int err, xirq, xdma1; - struct snd_card *card; - struct snd_wss *chip; - - err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); - if (err < 0) - return err; - - xirq = irq[dev]; - if (xirq == SNDRV_AUTO_IRQ) { - if ((xirq = snd_legacy_find_free_irq(possible_irqs)) < 0) { - snd_printk(KERN_ERR PFX "unable to find a free IRQ\n"); - err = -EBUSY; - goto _err; - } - } - xdma1 = dma1[dev]; - if (xdma1 == SNDRV_AUTO_DMA) { - if ((xdma1 = snd_legacy_find_free_dma(possible_dmas)) < 0) { - snd_printk(KERN_ERR PFX "unable to find a free DMA\n"); - err = -EBUSY; - goto _err; - } - } - - if ((err = snd_sgalaxy_detect(dev, xirq, xdma1)) < 0) - goto _err; - - err = snd_wss_create(card, wssport[dev] + 4, -1, - xirq, xdma1, -1, - WSS_HW_DETECT, 0, &chip); - if (err < 0) - goto _err; - card->private_data = chip; - - err = snd_wss_pcm(chip, 0, NULL); - if (err < 0) { - snd_printdd(PFX "error creating new WSS PCM device\n"); - goto _err; - } - err = snd_wss_mixer(chip); - if (err < 0) { - snd_printdd(PFX "error creating new WSS mixer\n"); - goto _err; - } - if ((err = snd_sgalaxy_mixer(chip)) < 0) { - snd_printdd(PFX "the mixer rewrite failed\n"); - goto _err; - } - - strcpy(card->driver, "Sound Galaxy"); - strcpy(card->shortname, "Sound Galaxy"); - sprintf(card->longname, "Sound Galaxy at 0x%lx, irq %d, dma %d", - wssport[dev], xirq, xdma1); - - snd_card_set_dev(card, devptr); - - if ((err = snd_card_register(card)) < 0) - goto _err; - - dev_set_drvdata(devptr, card); - return 0; - - _err: - snd_card_free(card); - return err; -} - -static int __devexit snd_sgalaxy_remove(struct device *devptr, unsigned int dev) -{ - snd_card_free(dev_get_drvdata(devptr)); - dev_set_drvdata(devptr, NULL); - return 0; -} - -#ifdef CONFIG_PM -static int snd_sgalaxy_suspend(struct device *pdev, unsigned int n, - pm_message_t state) -{ - struct snd_card *card = dev_get_drvdata(pdev); - struct snd_wss *chip = card->private_data; - - snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); - chip->suspend(chip); - return 0; -} - -static int snd_sgalaxy_resume(struct device *pdev, unsigned int n) -{ - struct snd_card *card = dev_get_drvdata(pdev); - struct snd_wss *chip = card->private_data; - - chip->resume(chip); - snd_wss_out(chip, SGALAXY_AUXC_LEFT, chip->image[SGALAXY_AUXC_LEFT]); - snd_wss_out(chip, SGALAXY_AUXC_RIGHT, chip->image[SGALAXY_AUXC_RIGHT]); - - snd_power_change_state(card, SNDRV_CTL_POWER_D0); - return 0; -} -#endif - -#define DEV_NAME "sgalaxy" - -static struct isa_driver snd_sgalaxy_driver = { - .match = snd_sgalaxy_match, - .probe = snd_sgalaxy_probe, - .remove = __devexit_p(snd_sgalaxy_remove), -#ifdef CONFIG_PM - .suspend = snd_sgalaxy_suspend, - .resume = snd_sgalaxy_resume, -#endif - .driver = { - .name = DEV_NAME - }, -}; - -static int __init alsa_card_sgalaxy_init(void) -{ - return isa_register_driver(&snd_sgalaxy_driver, SNDRV_CARDS); -} - -static void __exit alsa_card_sgalaxy_exit(void) -{ - isa_unregister_driver(&snd_sgalaxy_driver); -} - -module_init(alsa_card_sgalaxy_init) -module_exit(alsa_card_sgalaxy_exit) -- 1.7.2.1 --------------090601030001020106090309--

1 0

[alsa-devel] [REGRESSION 2.6.35+] Pulseaudio fails to work with sound device
by Maxim Levitsky 13 Aug '10

13 Aug '10

Hi, Trying to migrate to git master of kernel tree I see that my sound stopped working. Initially I though a problem in device configuration/detection in kernel driver is the issue, but its not. In just that pulseaudio refuses to work with alsa device. Since today everything is routed through pulseaudio, even alsa it looks initially as if sound doesn't work at all. If I were pulseaudio hater, I would think of that as a feature, but I am not. I attach verbose pulseaudio log. I don't see anything very interesting there. Kernel seems to reject the access because device is busy, but I know that it isn't (for example I can unload snd_hda_intel freely, fuser shows nothing on /dev/snd/* ...) vanilla 2.6.35 works fine. 100% reproducible. Since I know you will ask me for alsa-info.sh output I attach it. (for long time I use power_save=0 parameter on snd_hda_intel. I can just disable that in kernel config, but I keep it to maybe fix issues I had with this (mostly pa crashes, which otherwise doesn't crash at all) I should probably do a bisection, but I am very short on time lately. Best regards, Maxim Levitsky

2 1

[alsa-devel] Pops, Clicks on Capture w/ S/PDIF, Cirrus Logic CS4207, HDA
by Dave Zielinski 13 Aug '10

13 Aug '10

Hello, I have a custom platform with a Cirrus Logic CS4207 connected to an HDA bus of a Intel US15W & Atom processor. I'm trying to capture audio from the S/PDIF input of the CS4207 and getting pops & clicks. I'm not sure if there is another platform out there that utilizes the S/PDIF input of this chip so this might be new although usage of US15W shouldn't be anything new. Software-wise I'm running: Moblin release 2.1 Advanced Linux Sound Architecture Driver Version 1.0.20. 2.6.31.6-17.10.moblin2-custom - The kernel is built to include a back ported version of the 2.6.32 Cirrus Logic patch for HDA. I guess we backported a checkin from the nearest stable kernel release. We had to do a couple of things to get it to work like comment a line in the driver so that it ignores the digital mic input as it seems the driver only supported one digital input and during the parsing the private data (NID and such) were getting clobbered when the DMIC node is parsed. As a result the capture was using the wrong node. position_fix=1 had to be applied also because there was a repeating audio issue. So now we're getting some audio but it comes with pops and clicks when we try to capture. An analysis of the captured stream shows there are corruptions of the data that are 8192 frames apart which I believe are the 4096 frame period boundaries (although tough to know for sure). When the corruption occurs there seems to be 5 to 7 frames that are screwed up. Also worth noting: these same exact samples appear in the stream at a prior location so I think its old buffer data. My guess is that we're reading the buffer before the "writer" was done writing it. I've tried to mess around with the buffer size & period size (although buff was always == per*4); tried mmap; I also tried messing around with the bdl_pos_adj option in the driver. It sounded like maybe this was most likely to solve the problem. But that didn't have any effect. So I started studying the code and realized there was going to be some learning curve here so I was hoping someone could point me in the right direction to help resolve this. Thank you! Dave Z. Here are my capture settings: Recording raw data 'test.raw' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Hardware PCM card 0 'HDA Intel MID' device 1 subdevice 0 Its setup is: stream : CAPTURE access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 48000 exact rate : 48000 (48000/1) msbits : 16 buffer_size : 16384 period_size : 4096 period_time : 85333 tstamp_mode : NONE period_step : 1 avail_min : 4096 period_event : 0 start_threshold : 1 stop_threshold : 16384 silence_threshold: 0 silence_size : 0 boundary : 1073741824 appl_ptr : 0 hw_ptr : 0

2 3

[alsa-devel] HDMI audio: TV vs. codec supported sample rates
by Stephen Warren 13 Aug '10

13 Aug '10

A user has the following setup: A GPU which supports audio-over-HDMI. The codec supports sample rates 32000 44100 48000 88200 96000 176400 192000 (from /proc/asound/card1/codec#1). However, the user's TV supports only sample rates 44100 48000 88200 (from /proc/asound/card1/eld*). When the user plays sound with sample rate 22050, they hear nothing. Sound with sample rates supported by the TV works OK. My question: Is the HDA codec driver supposed to dynamically adjust its list of supported sample rates based on the ELD content, or is the ALSA library somehow supposed to detect the subset of rates supported in HW and convert the sample rate in SW before sending the audio to the driver? Thanks for any insight. -- nvpublic

5 17

[alsa-devel] mmotm 2010-08-11 - audio volume issues
by Valdis.Kletnieks＠vt.edu 13 Aug '10

13 Aug '10

On Wed, 11 Aug 2010 16:10:49 PDT, akpm(a)linux-foundation.org said: > The mm-of-the-moment snapshot 2010-08-11-16-10 has been uploaded to > > http://userweb.kernel.org/~akpm/mmotm/ Something appears to be borked in the ALSA arena. There's no actual volume coming out of the system, and 'alsamixer' is insisting that the volume slider only goes from 0 to 10% or so, no further. However, experimentation shows that the volume slider in 'xine' *does* affect the 'Amp-Out vals' lines, and alsamixer has *no* effect on what 'Amp-Out vals' lists. A diff of alsa-info.sh for the two kernels shows them being identical, so I'm only attaching one copy. It may be the weekend before I find time to do a bisection of this.

3 4

[alsa-devel] [PATCH 1/2] ASoC: Remove version display from WM8510 driver
by Mark Brown 12 Aug '10

12 Aug '10

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8510.c | 4 ---- 1 files changed, 0 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index dbfa05d..1c623de 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -29,8 +29,6 @@ #include "wm8510.h" -#define WM8510_VERSION "0.6" - /* * wm8510 register cache * We can't read the WM8510 register space when we are @@ -563,8 +561,6 @@ static int wm8510_probe(struct snd_soc_codec *codec) struct wm8510_priv *wm8510 = snd_soc_codec_get_drvdata(codec); int ret; - pr_info("WM8510 Audio Codec %s", WM8510_VERSION); - codec->control_data = wm8510->control_data; ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8510->control_type); if (ret < 0) { -- 1.7.1

2 2

[alsa-devel] [PATCH] ASoC: multi-component: TWL4030: Restore registers on removal
by Peter Ujfalusi 12 Aug '10

12 Aug '10

Add back the register restore call, when the codec driver is removed. This does not affect normal operation, but it is usefull when debugging audio through the twl4030 class codecs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> --- Hello Liam, Mark I did missed the removal of the register restore from the module unload path in multi-comp. This patchs adds it back. Peter sound/soc/codecs/twl4030.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 898430f..c7ee1a4 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -2258,6 +2258,8 @@ static int twl4030_soc_probe(struct snd_soc_codec *codec) static int twl4030_soc_remove(struct snd_soc_codec *codec) { + /* Reset registers to their chip default before leaving */ + twl4030_reset_registers(codec); twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; } -- 1.7.2

3 2

[alsa-devel] route plugin issue
by Tim Blechmann 12 Aug '10

12 Aug '10

hi all, when trying to use the route plugin with an lx6464es soundcard, it seems that only gain values of 1 work correctly. if i apply a different gain, the specific channel is silent. when i was trying this on another computer (with an hdsp and internal hda chip), it was working fine, though ... the only difference that i found is, that i am aware of is, that the lx6464es was used with 24bit samples, while the hdsp/hda were using 32bit samples ... is it possible that the route plugin has an issue with 24bit samples? or may there be another reason, explaining this behavior? thanks, tim -- tim(a)klingt.org http://tim.klingt.org Just what the hell is the experimental tradition? Morton Feldman

1 0

[alsa-devel] Beginner to Alsa Development
by Tejas 12 Aug '10

12 Aug '10

Hello All, I am new to alsa interface development. I would like to write one application which accept *.pcm file as input and give playback of it on sound device on linux system. My requirement is to set sample rate 44100, channel 2 and access method is SND_PCM_ACCESS_RW_INTERLEAVED and data length is 16 bit little endian. Can any oen guide me how can I start writing application in c file and which are those APIs which I need to take care and handling of different error codes. It is very urgent. Please correct me if I am wrong at anywhere. -Tejas.

2 1

[alsa-devel] Alsamixer-Qt 0.4.1 available
by Sebastian H. 12 Aug '10

12 Aug '10

Hello again This is a bugfix release. Not all issues have been addressed, but hopefully the most annoying ones. 1.) https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3678 The "EQ Peaks" mixer element gets skipped since there's not way to display it correctly at the moment. Also the mixer now looks for all element channels from 0 up to SND_MIXER_SCHN_LAST (= 31). Formerly it was only for the first 9 channels. 2.) https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4204 Raymond brought this up but I'm not entirely sure what's the problem here. Are there actually 5 controls named "Master" on this card? If so alsamixer-qt4 now appends the element index to the element name for elements whose name appears more that once. This should happen for all elements but I could only test it for "Capture" and "Input Source". Both appear twice on my HDA-Intel onboard card. Download at: http://xwmw.org/alsamixer-qt4/ http://sourceforge.net/projects/alsamixer-qt4/files/ Comments are welcome! Best, Sebastian H.

2 2

[alsa-devel] [PATCH 1/2] ASoC: Automatically determine control_data for soc-cache users
by Mark Brown 12 Aug '10

12 Aug '10

Since the provision of a struct device for the CODEC is now mandatory we can use container_of() to locate the struct i2c_client and struct spi_device for relevant devices, removing the need to manually set it in each driver. A further patch will automate selection of the control type based on the bus_type of the struct device, further reducing the amount of driver code required. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/soc-cache.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c index 83cd8ed..b856177 100644 --- a/sound/soc/soc-cache.c +++ b/sound/soc/soc-cache.c @@ -584,11 +584,19 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec, #endif if (io_types[i].i2c_read) codec->hw_read = io_types[i].i2c_read; + + codec->control_data = container_of(codec->dev, + struct i2c_client, + dev); break; case SND_SOC_SPI: if (io_types[i].spi_write) codec->hw_write = io_types[i].spi_write; + + codec->control_data = container_of(codec->dev, + struct spi_device, + dev); break; } -- 1.7.1

1 2

[alsa-devel] [PATCH] ASoC: Fix I2C device names
by Mark Brown 12 Aug '10

12 Aug '10

Some of the I2C device names got mangled into the form 0-0x1a rather than 0-001a as they should be. Also, the WM8580 is at I2C address 0x1b not 0x1a on SMDK64xx. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/atmel/sam9g20_wm8731.c | 2 +- sound/soc/davinci/davinci-evm.c | 8 ++++---- sound/soc/ep93xx/snappercl15.c | 2 +- sound/soc/imx/eukrea-tlv320.c | 2 +- sound/soc/kirkwood/kirkwood-openrd.c | 2 +- sound/soc/s3c24xx/smdk64xx_wm8580.c | 4 ++-- sound/soc/s6000/s6105-ipcam.c | 2 +- sound/soc/sh/fsi-ak4642.c | 2 +- sound/soc/sh/fsi-da7210.c | 2 +- sound/soc/sh/migor.c | 2 +- 10 files changed, 14 insertions(+), 14 deletions(-) diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index cf9f6c9..66a6f18 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -184,7 +184,7 @@ static struct snd_soc_dai_link at91sam9g20ek_dai = { .codec_dai_name = "wm8731-hifi", .init = at91sam9g20ek_wm8731_init, .platform_name = "atmel_pcm-audio", - .codec_name = "wm8731-codec.0-0x1a", + .codec_name = "wm8731-codec.0-001a", .ops = &at91sam9g20ek_ops, }; diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 3d6b5b6..097bbbe 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -162,7 +162,7 @@ static struct snd_soc_dai_link evm_dai = { .stream_name = "AIC3X", .cpu_dai_name = "davinci-mcasp-dai.0", .codec_dai_name = "tlv320aic3x-hifi", - .codec_name = "tlv320aic3x-codec.0-0x1a", + .codec_name = "tlv320aic3x-codec.0-001a", .platform_name = "davinci-pcm-audio", .init = evm_aic3x_init, .ops = &evm_ops, @@ -175,7 +175,7 @@ static struct snd_soc_dai_link dm365_evm_dai = { .cpu_dai_name = "davinci-i2s-dai", .codec_dai_name = "tlv320aic3x-hifi", .init = evm_aic3x_init, - .codec_name = "tlv320aic3x-codec.0-0x1a", + .codec_name = "tlv320aic3x-codec.0-001a", .ops = &evm_ops, #elif defined(CONFIG_SND_DM365_VOICE_CODEC) .name = "Voice Codec - CQ93VC", @@ -194,7 +194,7 @@ static struct snd_soc_dai_link dm6467_evm_dai[] = { .cpu_dai_name= "davinci-mcasp-dai.0", .codec_dai_name = "tlv320aic3x-hifi", .platform_name ="davinci-pcm-audio", - .codec_name = "tlv320aic3x-codec.0-0x1a", + .codec_name = "tlv320aic3x-codec.0-001a", .init = evm_aic3x_init, .ops = &evm_ops, }, @@ -213,7 +213,7 @@ static struct snd_soc_dai_link da8xx_evm_dai = { .stream_name = "AIC3X", .cpu_dai_name= "davinci-mcasp-dai.0", .codec_dai_name = "tlv320aic3x-hifi", - .codec_name = "tlv320aic3x-codec.0-0x1a", + .codec_name = "tlv320aic3x-codec.0-001a", .platform_name = "davinci-pcm-audio", .init = evm_aic3x_init, .ops = &evm_ops, diff --git a/sound/soc/ep93xx/snappercl15.c b/sound/soc/ep93xx/snappercl15.c index 539e839..402d299 100644 --- a/sound/soc/ep93xx/snappercl15.c +++ b/sound/soc/ep93xx/snappercl15.c @@ -92,7 +92,7 @@ static struct snd_soc_dai_link snappercl15_dai = { .stream_name = "AIC23", .cpu_dai_name = "ep93xx-i2s-dai", .codec_dai_name = "tlv320aic23-hifi", - .codec_name = "tlv320aic23-codec.0-0x1a", + .codec_name = "tlv320aic23-codec.0-001a", .platform_name = "ep93xx-pcm-audio", .init = snappercl15_tlv320aic23_init, .ops = &snappercl15_ops, diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c index ab76cae..807f736 100644 --- a/sound/soc/imx/eukrea-tlv320.c +++ b/sound/soc/imx/eukrea-tlv320.c @@ -81,7 +81,7 @@ static struct snd_soc_dai_link eukrea_tlv320_dai = { .stream_name = "TLV320AIC23", .codec_dai = "tlv320aic23-hifi", .platform_name = "imx-pcm-audio.0", - .codec_name = "tlv320aic23-codec.0-0x1a", + .codec_name = "tlv320aic23-codec.0-001a", .cpu_dai = "imx-ssi-dai.0", .ops = &eukrea_tlv320_snd_ops, }; diff --git a/sound/soc/kirkwood/kirkwood-openrd.c b/sound/soc/kirkwood/kirkwood-openrd.c index 6f9ac42..b375021 100644 --- a/sound/soc/kirkwood/kirkwood-openrd.c +++ b/sound/soc/kirkwood/kirkwood-openrd.c @@ -67,7 +67,7 @@ static struct snd_soc_dai_link openrd_client_dai[] = { .cpu_dai_name = "kirkwood-i2s-dai", .platform_name = "kirkwood-pcm-audio", .codec_dai_name = "cs42l51_hifi", - .codec_name = "cs42l51-codec.0-0x4a", + .codec_name = "cs42l51-codec.0-004a", .ops = &openrd_client_ops, }, }; diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c index 4ccfe84..9d959a0 100644 --- a/sound/soc/s3c24xx/smdk64xx_wm8580.c +++ b/sound/soc/s3c24xx/smdk64xx_wm8580.c @@ -226,7 +226,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = { .cpu_dai_name = "s3c64xx-i2s-v4-dai", .codec_dai_name = "wm8580-hifi-playback", .platform_name = "s3c24xx-pcm-audio", - .codec_name = "wm8580-codec.0-0x1a", + .codec_name = "wm8580-codec.0-001b", .init = smdk64xx_wm8580_init_paifrx, .ops = &smdk64xx_ops, }, @@ -236,7 +236,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = { .cpu_dai_name = "s3c64xx-i2s-v4-dai", .codec_dai_name = "wm8580-hifi-capture", .platform_name = "s3c24xx-pcm-audio", - .codec_name = "wm8580-codec.0-0x1a", + .codec_name = "wm8580-codec.0-001b", .init = smdk64xx_wm8580_init_paiftx, .ops = &smdk64xx_ops, }, diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c index dd39467..dff9d39 100644 --- a/sound/soc/s6000/s6105-ipcam.c +++ b/sound/soc/s6000/s6105-ipcam.c @@ -179,7 +179,7 @@ static struct snd_soc_dai_link s6105_dai = { .cpu_dai_name = "s6000-i2s-dai", .codec_dai_name = "tlv320aic3x-hifi", .platform_name = "s6000-pcm-audio", - .codec_name = "tlv320aic3x-codec.0-0x1a", + .codec_name = "tlv320aic3x-codec.0-001a", .init = s6105_aic3x_init, .ops = &s6105_ops, }; diff --git a/sound/soc/sh/fsi-ak4642.c b/sound/soc/sh/fsi-ak4642.c index ff17ff3..9e107a9 100644 --- a/sound/soc/sh/fsi-ak4642.c +++ b/sound/soc/sh/fsi-ak4642.c @@ -32,7 +32,7 @@ static struct snd_soc_dai_link fsi_dai_link = { .cpu_dai_name = "fsia-dai", /* fsi A */ .codec_dai_name = "ak4642-hifi", .platform_name = "fsi-pcm-audio", - .codec_name = "ak4642-codec.0-0x12", + .codec_name = "ak4642-codec.0-0012", .init = fsi_ak4642_dai_init, .ops = NULL, }; diff --git a/sound/soc/sh/fsi-da7210.c b/sound/soc/sh/fsi-da7210.c index e2f6fe5..4f9298f 100644 --- a/sound/soc/sh/fsi-da7210.c +++ b/sound/soc/sh/fsi-da7210.c @@ -28,7 +28,7 @@ static struct snd_soc_dai_link fsi_da7210_dai = { .cpu_dai_name = "fsib-dai", /* FSI B */ .codec_dai_name = "da7210-hifi", .platform_name = "fsi-pcm-audio", - .codec_name = "da7210-codec.0-0x1a", + .codec_name = "da7210-codec.0-001a", .init = fsi_da7210_init, }; diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c index 0dc3a0e..866d78f 100644 --- a/sound/soc/sh/migor.c +++ b/sound/soc/sh/migor.c @@ -155,7 +155,7 @@ static struct snd_soc_dai_link migor_dai = { .cpu_dai_name = "siu-i2s-dai", .codec_dai_name = "wm8978-hifi", .platform_name = "siu-pcm-audio", - .codec_name = "wm8978-codec.0-0x1a", + .codec_name = "wm8978-codec.0-001a", .ops = &migor_dai_ops, .init = migor_dai_init, }; -- 1.7.1

1 0

[alsa-devel] ALSA: How to create multiple cards?
by Truong Hoang 12 Aug '10

12 Aug '10

Hi all, I have a problem that I need help from the ALSA experts. I want to write an alsa shim .ko which creates multiple cards. Let's assume 2 cards. My program calls snd_card_create() and snd_card_register() two times. I also has 1 PCM for each of these card. After install the .ko to the kernal, I see the /proc/asound has card0 and card1. But the "aplay -l" sees only card0. The snd_card_next() only returns 0 (i.e. 1 card). What did I miss in my program? The /dev/snd/ has only hwC0D0 and pcmD0C0p. I am a beginner in ALSA, so I appreciate if you can give the explanation in detail. Thank you,

2 1

[alsa-devel] [PATCH 1/4] sound: oss: sh_dac_audio.c removed duplicated #include
by Andrea Gelmini 12 Aug '10

12 Aug '10

Signed-off-by: Andrea Gelmini <andrea.gelmini(a)gelma.net> --- sound/oss/sh_dac_audio.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c index fdb58eb..479e302 100644 --- a/sound/oss/sh_dac_audio.c +++ b/sound/oss/sh_dac_audio.c @@ -15,7 +15,6 @@ #include <linux/linkage.h> #include <linux/slab.h> #include <linux/fs.h> -#include <linux/smp_lock.h> #include <linux/sound.h> #include <linux/smp_lock.h> #include <linux/soundcard.h> -- 1.7.2.1.85.g2d089

2 1

[PATCH 5/5] ASoc: add machine driver for 88pm860x
by Haojian Zhuang 12 Aug '10

12 Aug '10

88PM860x codec is used in Marvell development board (Saarb and tavorevb3). Codec is used as master mode in both of these two boards. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/Kconfig | 18 ++++ sound/soc/pxa/Makefile | 4 + sound/soc/pxa/saarb.c | 208 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/pxa/tavorevb3.c | 209 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 439 insertions(+), 0 deletions(-) create mode 100644 sound/soc/pxa/saarb.c create mode 100644 sound/soc/pxa/tavorevb3.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index e30c832..37f191b 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -117,6 +117,24 @@ config SND_PXA2XX_SOC_PALM27X Say Y if you want to add support for SoC audio on Palm T|X, T5, E2 or LifeDrive handheld computer. +config SND_SOC_SAARB + tristate "SoC Audio support for Marvell Saarb" + depends on SND_PXA2XX_SOC && MACH_SAARB + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + +config SND_SOC_TAVOREVB3 + tristate "SoC Audio support for Marvell Tavor EVB3" + depends on SND_PXA2XX_SOC && MACH_TAVOREVB3 + select SND_PXA_SOC_SSP + select SND_SOC_88PM860X + help + Say Y if you want to add support for SoC audio on the + Marvell Saarb reference platform. + config SND_SOC_ZYLONITE tristate "SoC Audio support for Marvell Zylonite" depends on SND_PXA2XX_SOC && MACH_ZYLONITE diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index caa03d8..0766016 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -19,6 +19,8 @@ snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o +snd-soc-saarb-objs := saarb.o +snd-soc-tavorevb3-objs := tavorevb3.o snd-soc-zylonite-objs := zylonite.o snd-soc-magician-objs := magician.o snd-soc-mioa701-objs := mioa701_wm9713.o @@ -38,6 +40,8 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o +obj-$(CONFIG_SND_SOC_SAARB) += snd-soc-saarb.o +obj-$(CONFIG_SND_SOC_TAVOREVB3) += snd-soc-tavorevb3.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o obj-$(CONFIG_SND_SOC_RAUMFELD) += snd-soc-raumfeld.o diff --git a/sound/soc/pxa/saarb.c b/sound/soc/pxa/saarb.c new file mode 100644 index 0000000..4220c28 --- /dev/null +++ b/sound/soc/pxa/saarb.c @@ -0,0 +1,208 @@ +/* + * saarb.c -- SoC audio for saarb + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "../../arm/pxa2xx-pcm.h" +#include "pxa-ssp.h" + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *saarb_snd_device; +static struct snd_soc_jack hs_jack; + +/* Headset jack detection DAPM pins */ +static struct snd_soc_jack_pin hs_jack_pins[] = { + { + .pin = "Mic Jack", + .mask = SND_JACK_MICROPHONE, + }, { + .pin = "Headphone Jack", + .mask = SND_JACK_HEADPHONE, + }, +}; + +/* saarb machine dapm widgets */ +static const struct snd_soc_dapm_widget saarb_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Board Speaker", NULL), + SND_SOC_DAPM_MIC("Board Mic 1", NULL), + SND_SOC_DAPM_MIC("Board Mic 3", NULL), +}; + +/* saarb machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Jack", NULL, "HS1"}, + {"Headphone Jack", NULL, "HS2"}, + + {"Board Speaker", NULL, "LSP"}, + {"Board Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Board Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Mic Jack"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Board Mic 3"}, +}; + +static const struct snd_kcontrol_new pm860x_saarb_controls[] = { + SOC_DAPM_PIN_SWITCH("Board Speaker"), + SOC_DAPM_PIN_SWITCH("Board Mic 1"), + SOC_DAPM_PIN_SWITCH("Board Mic 3"), +}; + +static int saarb_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + + return ret; +} + +static struct snd_soc_ops saarb_i2s_ops = { + .hw_params = saarb_i2s_hw_params, +}; + +static struct snd_soc_dai_link saarb_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = saarb_pm860x_init, + .ops = &saarb_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_saarb = { + .name = "Saarb", + .dai_link = saarb_dai, + .num_links = ARRAY_SIZE(saarb_dai), +}; + +static int saarb_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + ret = snd_soc_add_controls(codec, pm860x_saarb_controls, + ARRAY_SIZE(pm860x_saarb_controls)); + if (ret < 0) + return ret; + + snd_soc_dapm_new_controls(codec, saarb_dapm_widgets, + ARRAY_SIZE(saarb_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_disable_pin(codec, "Board Speaker"); + snd_soc_dapm_disable_pin(codec, "Board Mic 1"); + snd_soc_dapm_disable_pin(codec, "Board Mic 3"); + + ret = snd_soc_dapm_sync(codec); + if (ret < 0) + return ret; + + /* Jack detection */ + ret = snd_soc_jack_new(codec, "Headset Jack", SND_JACK_HEADSET + | SND_JACK_LINEOUT | SND_JACK_BTN_0, &hs_jack); + if (ret < 0) + return ret; + + ret = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), + hs_jack_pins); + if (ret < 0) + return ret; + + ret = pm860x_hs_detect(codec, &hs_jack, PM860X_DET_MASK); + return ret; +} + +static int __init saarb_init(void) +{ + int ret; + + if (!machine_is_saarb()) + return -ENODEV; + saarb_snd_device = platform_device_alloc("soc-audio", -1); + if (!saarb_snd_device) + return -ENOMEM; + + platform_set_drvdata(saarb_snd_device, &snd_soc_card_saarb); + + ret = platform_device_add(saarb_snd_device); + if (ret) + platform_device_put(saarb_snd_device); + + return ret; +} + +static void __exit saarb_exit(void) +{ + platform_device_unregister(saarb_snd_device); +} + +module_init(saarb_init); +module_exit(saarb_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Saarb"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/pxa/tavorevb3.c b/sound/soc/pxa/tavorevb3.c new file mode 100644 index 0000000..d5f8ac9 --- /dev/null +++ b/sound/soc/pxa/tavorevb3.c @@ -0,0 +1,209 @@ +/* + * tavorevb3.c -- SoC audio for Tavor EVB3 + * + * Copyright (C) 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "../codecs/88pm860x-codec.h" +#include "../../arm/pxa2xx-pcm.h" +#include "pxa-ssp.h" + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd); + +static struct platform_device *evb3_snd_device; +static struct snd_soc_jack hs_jack; + +/* Headset jack detection DAPM pins */ +static struct snd_soc_jack_pin hs_jack_pins[] = { + { + .pin = "Mic Jack", + .mask = SND_JACK_MICROPHONE, + }, { + .pin = "Headphone Jack", + .mask = SND_JACK_HEADPHONE, + }, +}; + +/* tavorevb3 machine dapm widgets */ +static const struct snd_soc_dapm_widget evb3_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_LINE("Lineout Out 1", NULL), + SND_SOC_DAPM_LINE("Lineout Out 2", NULL), + SND_SOC_DAPM_SPK("Board Speaker", NULL), + SND_SOC_DAPM_MIC("Board Mic 1", NULL), + SND_SOC_DAPM_MIC("Board Mic 3", NULL), +}; + +/* tavorevb3 machine audio map */ +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Jack", NULL, "HS1"}, + {"Headphone Jack", NULL, "HS2"}, + + {"Board Speaker", NULL, "LSP"}, + {"Board Speaker", NULL, "LSN"}, + + {"Lineout Out 1", NULL, "LINEOUT1"}, + {"Lineout Out 2", NULL, "LINEOUT2"}, + + {"MIC1P", NULL, "Mic1 Bias"}, + {"MIC1N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Board Mic 1"}, + + {"MIC2P", NULL, "Mic1 Bias"}, + {"MIC2N", NULL, "Mic1 Bias"}, + {"Mic1 Bias", NULL, "Mic Jack"}, + + {"MIC3P", NULL, "Mic3 Bias"}, + {"MIC3N", NULL, "Mic3 Bias"}, + {"Mic3 Bias", NULL, "Board Mic 3"}, +}; + +static const struct snd_kcontrol_new pm860x_evb3_controls[] = { + SOC_DAPM_PIN_SWITCH("Board Speaker"), + SOC_DAPM_PIN_SWITCH("Board Mic 1"), + SOC_DAPM_PIN_SWITCH("Board Mic 3"), +}; + +static int evb3_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int width = snd_pcm_format_physical_width(params_format(params)); + int ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_NET_PLL, 0, + PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, PM860X_CLK_DIR_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 3, 3, 2, width); + return ret; +} + +static struct snd_soc_ops evb3_i2s_ops = { + .hw_params = evb3_i2s_hw_params, +}; + +static struct snd_soc_dai_link evb3_dai[] = { + { + .name = "88PM860x I2S", + .stream_name = "I2S Audio", + .cpu_dai_name = "pxa-ssp-dai.1", + .codec_dai_name = "88pm860x-i2s", + .platform_name = "pxa-pcm-audio", + .codec_name = "88pm860x-codec", + .init = evb3_pm860x_init, + .ops = &evb3_i2s_ops, + }, +}; + +static struct snd_soc_card snd_soc_card_evb3 = { + .name = "Tavor EVB3", + .dai_link = evb3_dai, + .num_links = ARRAY_SIZE(evb3_dai), +}; + +static int evb3_pm860x_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + ret = snd_soc_add_controls(codec, pm860x_evb3_controls, + ARRAY_SIZE(pm860x_evb3_controls)); + if (ret < 0) + return ret; + + snd_soc_dapm_new_controls(codec, evb3_dapm_widgets, + ARRAY_SIZE(evb3_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_disable_pin(codec, "Board Speaker"); + snd_soc_dapm_disable_pin(codec, "Board Mic 1"); + snd_soc_dapm_disable_pin(codec, "Board Mic 3"); + + ret = snd_soc_dapm_sync(codec); + if (ret < 0) + return ret; + + /* Jack detection */ + ret = snd_soc_jack_new(codec, "Headset Jack", SND_JACK_HEADSET + | SND_JACK_LINEOUT | SND_JACK_BTN_0, &hs_jack); + if (ret < 0) + return ret; + + ret = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins), + hs_jack_pins); + if (ret < 0) + return ret; + + ret = pm860x_hs_detect(codec, &hs_jack, PM860X_DET_MASK); + return ret; +} + +static int __init tavorevb3_init(void) +{ + int ret; + + if (!machine_is_tavorevb3()) + return -ENODEV; + evb3_snd_device = platform_device_alloc("soc-audio", -1); + if (!evb3_snd_device) + return -ENOMEM; + + platform_set_drvdata(evb3_snd_device, &snd_soc_card_evb3); + + ret = platform_device_add(evb3_snd_device); + if (ret) + platform_device_put(evb3_snd_device); + + return ret; +} + +static void __exit tavorevb3_exit(void) +{ + platform_device_unregister(evb3_snd_device); +} + +module_init(tavorevb3_init); +module_exit(tavorevb3_exit); + +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_DESCRIPTION("ALSA SoC 88PM860x Saarb"); +MODULE_LICENSE("GPL"); + -- 1.5.6.5

1 0

[PATCH 4/5] ASoC: add 88pm860x codec driver
by Haojian Zhuang 12 Aug '10

12 Aug '10

Add 88PM860x codec driver. 88PM860x codec supports two interfaces. And it also supports headset/mic/hook/short detection. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/codecs/88pm860x-codec.c | 1567 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/88pm860x-codec.h | 97 +++ sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + 4 files changed, 1670 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/88pm860x-codec.c create mode 100644 sound/soc/codecs/88pm860x-codec.h diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c new file mode 100644 index 0000000..0e5b445 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.c @@ -0,0 +1,1567 @@ +/* + * 88pm860x-codec.c -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Author: Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/mfd/88pm860x.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> + +#include "88pm860x-codec.h" + +#define MAX_NAME_LEN 20 +#define REG_CACHE_SIZE 0x40 +#define REG_CACHE_BASE 0xb0 + +/* Status Register 1 (0x01) */ +#define REG_STATUS_1 0x01 +#define MIC_STATUS (1 << 7) +#define HOOK_STATUS (1 << 6) +#define HEADSET_STATUS (1 << 5) + +/* Mic Detection Register (0x37) */ +#define REG_MIC_DET 0x37 +#define CONTINUOUS_POLLING (3 << 1) +#define EN_MIC_DET (1 << 0) +#define MICDET_MASK 0x07 + +/* Headset Detection Register (0x38) */ +#define REG_HS_DET 0x38 +#define EN_HS_DET (1 << 0) + +/* Misc2 Register (0x42) */ +#define REG_MISC2 0x42 +#define AUDIO_PLL (1 << 5) +#define AUDIO_SECTION_RESET (1 << 4) +#define AUDIO_SECTION_ON (1 << 3) + +/* PCM Interface Register 2 (0xb1) */ +#define PCM_INF2_BCLK (1 << 6) /* Bit clock polarity */ +#define PCM_INF2_FS (1 << 5) /* Frame Sync polarity */ +#define PCM_INF2_MASTER (1 << 4) /* Master / Slave */ +#define PCM_INF2_18WL (1 << 3) /* 18 / 16 bits */ +#define PCM_GENERAL_I2S 0 +#define PCM_EXACT_I2S 1 +#define PCM_LEFT_I2S 2 +#define PCM_RIGHT_I2S 3 +#define PCM_SHORT_FS 4 +#define PCM_LONG_FS 5 +#define PCM_MODE_MASK 7 + +/* I2S Interface Register 4 (0xbe) */ +#define I2S_EQU_BYP (1 << 6) + +/* DAC Offset Register (0xcb) */ +#define DAC_MUTE (1 << 7) + +/* ADC Analog Register 1 (0xd0) */ +#define REG_ADC_ANA_1 0xd0 +#define MIC1BIAS_MASK 0x60 + +/* Earpiece/Speaker Control Register 2 (0xda) */ +#define REG_EAR2 0xda +#define RSYNC_CHANGE (1 << 2) + +/* Audio Supplies Register 2 (0xdc) */ +#define REG_SUPPLIES2 0xdc +#define LDO15_READY (1 << 4) +#define LDO15_EN (1 << 3) +#define CPUMP_READY (1 << 2) +#define CPUMP_EN (1 << 1) +#define AUDIO_EN (1 << 0) + +/* Audio Enable Register 1 (0xdd) */ +#define ADC_MOD_RIGHT (1 << 1) +#define ADC_MOD_LEFT (1 << 0) + +/* Audio Enable Register 2 (0xde) */ +#define ADC_LEFT (1 << 5) +#define ADC_RIGHT (1 << 4) + +/* DAC Enable Register 2 (0xe1) */ +#define DAC_LEFT (1 << 5) +#define DAC_RIGHT (1 << 4) +#define MODULATOR (1 << 3) + +/* Shorts Register (0xeb) */ +#define REG_SHORTS 0xeb +#define SHORT_LO2 (1 << 6) +#define SHORT_LO1 (1 << 4) +#define SHORT_HS2 (1 << 2) +#define SHORT_HS1 (1 << 0) + +enum { + FILTER_BYPASS = 0, + FILTER_LOW_PASS_1, + FILTER_LOW_PASS_2, + FILTER_HIGH_PASS_3, + FILTER_MAX, +}; + +struct pm860x_hsdet { + struct snd_soc_jack *jack; + int det; +}; + +struct pm860x_priv { + unsigned int sysclk; + unsigned int pcmclk; + unsigned int dir; + unsigned int automute; + unsigned int filter; + struct snd_soc_codec *codec; + struct i2c_client *i2c; + struct pm860x_chip *chip; + + int irq[4]; + unsigned char name[4][MAX_NAME_LEN]; + struct pm860x_hsdet hsdet; + unsigned char reg_cache[REG_CACHE_SIZE]; +}; + +/* -9450dB to 0dB in 150dB steps ( mute instead of -9450dB) */ +static const DECLARE_TLV_DB_SCALE(dpga_tlv, -9450, 150, 1); + +/* -9dB to 0db in 3dB steps */ +static const DECLARE_TLV_DB_SCALE(adc_tlv, -900, 300, 0); + +/* {-23, -17, -13.5, -11, -9, -6, -3, 0}dB */ +static const unsigned int mic_tlv[] = { + TLV_DB_RANGE_HEAD(5), + 0, 0, TLV_DB_SCALE_ITEM(-2300, 0, 0), + 1, 1, TLV_DB_SCALE_ITEM(-1700, 0, 0), + 2, 2, TLV_DB_SCALE_ITEM(-1350, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(-1100, 0, 0), + 4, 7, TLV_DB_SCALE_ITEM(-900, 300, 0), +}; + +/* {0, 0, 0, -6, 0, 6, 12, 18}dB */ +static const unsigned int aux_tlv[] = { + TLV_DB_RANGE_HEAD(2), + 0, 2, TLV_DB_SCALE_ITEM(0, 0, 0), + 3, 7, TLV_DB_SCALE_ITEM(-600, 600, 0), +}; + +/* {-16, -13, -10, -7, -5.2, -3,3, -2.2, 0}dB, mute instead of -16dB */ +static const unsigned int out_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 3, TLV_DB_SCALE_ITEM(-1600, 300, 1), + 4, 4, TLV_DB_SCALE_ITEM(-520, 0, 0), + 5, 5, TLV_DB_SCALE_ITEM(-330, 0, 0), + 6, 7, TLV_DB_SCALE_ITEM(-220, 220, 0), +}; + +static const unsigned int st_tlv[] = { + TLV_DB_RANGE_HEAD(8), + 0, 1, TLV_DB_SCALE_ITEM(-12041, 602, 0), + 2, 3, TLV_DB_SCALE_ITEM(-11087, 250, 0), + 4, 5, TLV_DB_SCALE_ITEM(-10643, 158, 0), + 6, 7, TLV_DB_SCALE_ITEM(-10351, 116, 0), + 8, 9, TLV_DB_SCALE_ITEM(-10133, 92, 0), + 10, 13, TLV_DB_SCALE_ITEM(-9958, 70, 0), + 14, 17, TLV_DB_SCALE_ITEM(-9689, 53, 0), + 18, 271, TLV_DB_SCALE_ITEM(-9484, 37, 0), +}; + +/* Sidetone Gain = M * 2^(-5-N) */ +struct st_gain { + unsigned int db; + unsigned int m; + unsigned int n; +}; + +static struct st_gain st_table[] = { + {-12041, 1, 15}, {-11439, 1, 14}, {-11087, 3, 15}, {-10837, 1, 13}, + {-10643, 5, 15}, {-10485, 3, 14}, {-10351, 7, 15}, {-10235, 1, 12}, + {-10133, 9, 15}, {-10041, 5, 14}, { -9958, 11, 15}, { -9883, 3, 13}, + { -9813, 13, 15}, { -9749, 7, 14}, { -9689, 15, 15}, { -9633, 1, 11}, + { -9580, 17, 15}, { -9531, 9, 14}, { -9484, 19, 15}, { -9439, 5, 13}, + { -9397, 21, 15}, { -9356, 11, 14}, { -9318, 23, 15}, { -9281, 3, 12}, + { -9245, 25, 15}, { -9211, 13, 14}, { -9178, 27, 15}, { -9147, 7, 13}, + { -9116, 29, 15}, { -9087, 15, 14}, { -9058, 31, 15}, { -9031, 1, 10}, + { -8978, 17, 14}, { -8929, 9, 13}, { -8882, 19, 14}, { -8837, 5, 12}, + { -8795, 21, 14}, { -8754, 11, 13}, { -8716, 23, 14}, { -8679, 3, 11}, + { -8643, 25, 14}, { -8609, 13, 13}, { -8576, 27, 14}, { -8545, 7, 12}, + { -8514, 29, 14}, { -8485, 15, 13}, { -8456, 31, 14}, { -8429, 1, 9}, + { -8376, 17, 13}, { -8327, 9, 12}, { -8280, 19, 13}, { -8235, 5, 11}, + { -8193, 21, 13}, { -8152, 11, 12}, { -8114, 23, 13}, { -8077, 3, 10}, + { -8041, 25, 13}, { -8007, 13, 12}, { -7974, 27, 13}, { -7943, 7, 11}, + { -7912, 29, 13}, { -7883, 15, 12}, { -7854, 31, 13}, { -7827, 1, 8}, + { -7774, 17, 12}, { -7724, 9, 11}, { -7678, 19, 12}, { -7633, 5, 10}, + { -7591, 21, 12}, { -7550, 11, 11}, { -7512, 23, 12}, { -7475, 3, 9}, + { -7439, 25, 12}, { -7405, 13, 11}, { -7372, 27, 12}, { -7341, 7, 10}, + { -7310, 29, 12}, { -7281, 15, 11}, { -7252, 31, 12}, { -7225, 1, 7}, + { -7172, 17, 11}, { -7122, 9, 10}, { -7075, 19, 11}, { -7031, 5, 9}, + { -6989, 21, 11}, { -6948, 11, 10}, { -6910, 23, 11}, { -6873, 3, 8}, + { -6837, 25, 11}, { -6803, 13, 10}, { -6770, 27, 11}, { -6739, 7, 9}, + { -6708, 29, 11}, { -6679, 15, 10}, { -6650, 31, 11}, { -6623, 1, 6}, + { -6570, 17, 10}, { -6520, 9, 9}, { -6473, 19, 10}, { -6429, 5, 8}, + { -6386, 21, 10}, { -6346, 11, 9}, { -6307, 23, 10}, { -6270, 3, 7}, + { -6235, 25, 10}, { -6201, 13, 9}, { -6168, 27, 10}, { -6137, 7, 8}, + { -6106, 29, 10}, { -6077, 15, 9}, { -6048, 31, 10}, { -6021, 1, 5}, + { -5968, 17, 9}, { -5918, 9, 8}, { -5871, 19, 9}, { -5827, 5, 7}, + { -5784, 21, 9}, { -5744, 11, 8}, { -5705, 23, 9}, { -5668, 3, 6}, + { -5633, 25, 9}, { -5599, 13, 8}, { -5566, 27, 9}, { -5535, 7, 7}, + { -5504, 29, 9}, { -5475, 15, 8}, { -5446, 31, 9}, { -5419, 1, 4}, + { -5366, 17, 8}, { -5316, 9, 7}, { -5269, 19, 8}, { -5225, 5, 6}, + { -5182, 21, 8}, { -5142, 11, 7}, { -5103, 23, 8}, { -5066, 3, 5}, + { -5031, 25, 8}, { -4997, 13, 7}, { -4964, 27, 8}, { -4932, 7, 6}, + { -4902, 29, 8}, { -4873, 15, 7}, { -4844, 31, 8}, { -4816, 1, 3}, + { -4764, 17, 7}, { -4714, 9, 6}, { -4667, 19, 7}, { -4623, 5, 5}, + { -4580, 21, 7}, { -4540, 11, 6}, { -4501, 23, 7}, { -4464, 3, 4}, + { -4429, 25, 7}, { -4395, 13, 6}, { -4362, 27, 7}, { -4330, 7, 5}, + { -4300, 29, 7}, { -4270, 15, 6}, { -4242, 31, 7}, { -4214, 1, 2}, + { -4162, 17, 6}, { -4112, 9, 5}, { -4065, 19, 6}, { -4021, 5, 4}, + { -3978, 21, 6}, { -3938, 11, 5}, { -3899, 23, 6}, { -3862, 3, 3}, + { -3827, 25, 6}, { -3793, 13, 5}, { -3760, 27, 6}, { -3728, 7, 4}, + { -3698, 29, 6}, { -3668, 15, 5}, { -3640, 31, 6}, { -3612, 1, 1}, + { -3560, 17, 5}, { -3510, 9, 4}, { -3463, 19, 5}, { -3419, 5, 3}, + { -3376, 21, 5}, { -3336, 11, 4}, { -3297, 23, 5}, { -3260, 3, 2}, + { -3225, 25, 5}, { -3191, 13, 4}, { -3158, 27, 5}, { -3126, 7, 3}, + { -3096, 29, 5}, { -3066, 15, 4}, { -3038, 31, 5}, { -3010, 1, 0}, + { -2958, 17, 4}, { -2908, 9, 3}, { -2861, 19, 4}, { -2816, 5, 2}, + { -2774, 21, 4}, { -2734, 11, 3}, { -2695, 23, 4}, { -2658, 3, 1}, + { -2623, 25, 4}, { -2589, 13, 3}, { -2556, 27, 4}, { -2524, 7, 2}, + { -2494, 29, 4}, { -2464, 15, 3}, { -2436, 31, 4}, { -2408, 2, 0}, + { -2356, 17, 3}, { -2306, 9, 2}, { -2259, 19, 3}, { -2214, 5, 1}, + { -2172, 21, 3}, { -2132, 11, 2}, { -2093, 23, 3}, { -2056, 3, 0}, + { -2021, 25, 3}, { -1987, 13, 2}, { -1954, 27, 3}, { -1922, 7, 1}, + { -1892, 29, 3}, { -1862, 15, 2}, { -1834, 31, 3}, { -1806, 4, 0}, + { -1754, 17, 2}, { -1704, 9, 1}, { -1657, 19, 2}, { -1612, 5, 0}, + { -1570, 21, 2}, { -1530, 11, 1}, { -1491, 23, 2}, { -1454, 6, 0}, + { -1419, 25, 2}, { -1384, 13, 1}, { -1352, 27, 2}, { -1320, 7, 0}, + { -1290, 29, 2}, { -1260, 15, 1}, { -1232, 31, 2}, { -1204, 8, 0}, + { -1151, 17, 1}, { -1102, 9, 0}, { -1055, 19, 1}, { -1010, 10, 0}, + { -968, 21, 1}, { -928, 11, 0}, { -889, 23, 1}, { -852, 12, 0}, + { -816, 25, 1}, { -782, 13, 0}, { -750, 27, 1}, { -718, 14, 0}, + { -688, 29, 1}, { -658, 15, 0}, { -630, 31, 1}, { -602, 16, 0}, + { -549, 17, 0}, { -500, 18, 0}, { -453, 19, 0}, { -408, 20, 0}, + { -366, 21, 0}, { -325, 22, 0}, { -287, 23, 0}, { -250, 24, 0}, + { -214, 25, 0}, { -180, 26, 0}, { -148, 27, 0}, { -116, 28, 0}, + { -86, 29, 0}, { -56, 30, 0}, { -28, 31, 0}, { 0, 0, 0}, +}; + +static int pm860x_volatile(unsigned int reg) +{ + BUG_ON(reg >= REG_CACHE_SIZE); + + switch (reg) { + case PM860X_AUDIO_SUPPLIES_2: + return 1; + } + + return 0; +} + +static unsigned int pm860x_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (pm860x_volatile(reg)) + return cache[reg]; + + reg += REG_CACHE_BASE; + + return pm860x_reg_read(codec->control_data, reg); +} + +static int pm860x_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (!pm860x_volatile(reg)) + cache[reg] = (unsigned char)value; + + reg += REG_CACHE_BASE; + + return pm860x_reg_write(codec->control_data, reg, value); +} + +static int snd_soc_get_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int val[2], val2[2], i; + + val[0] = snd_soc_read(codec, reg) & 0x3f; + val[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT) >> 4) & 0xf; + val2[0] = snd_soc_read(codec, reg2) & 0x3f; + val2[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT)) & 0xf; + + for (i = 0; i < ARRAY_SIZE(st_table); i++) { + if ((st_table[i].m == val[0]) && (st_table[i].n == val[1])) + ucontrol->value.integer.value[0] = i; + if ((st_table[i].m == val2[0]) && (st_table[i].n == val2[1])) + ucontrol->value.integer.value[1] = i; + } + return 0; +} + +static int snd_soc_put_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int err; + unsigned int val, val2; + + val = ucontrol->value.integer.value[0]; + val2 = ucontrol->value.integer.value[1]; + + err = snd_soc_update_bits(codec, reg, 0x3f, st_table[val].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0xf0, + st_table[val].n << 4); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, 0x3f, st_table[val2].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0x0f, + st_table[val2].n); + return err; +} + +static int snd_soc_get_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max, val, val2; + unsigned int mask = (1 << fls(max)) - 1; + + val = snd_soc_read(codec, reg) >> shift; + val2 = snd_soc_read(codec, reg2) >> shift; + ucontrol->value.integer.value[0] = (max - val) & mask; + ucontrol->value.integer.value[1] = (max - val2) & mask; + + return 0; +} + +static int snd_soc_put_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max; + unsigned int mask = (1 << fls(max)) - 1; + int err; + unsigned int val, val2, val_mask; + + val_mask = mask << shift; + val = ((max - ucontrol->value.integer.value[0]) & mask); + val2 = ((max - ucontrol->value.integer.value[1]) & mask); + + val = val << shift; + val2 = val2 << shift; + + err = snd_soc_update_bits(codec, reg, val_mask, val); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, val_mask, val2); + return err; +} + +static int snd_soc_get_equalizer(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + if (pm860x->filter >= FILTER_MAX) + return -EINVAL; + + ucontrol->value.enumerated.item[0] = pm860x->filter; + return 0; +} + +static int snd_soc_put_equalizer(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + if (ucontrol->value.integer.value[0] >= FILTER_MAX) + return -EINVAL; + pm860x->filter = ucontrol->value.integer.value[0]; + switch (pm860x->filter) { + case FILTER_BYPASS: + snd_soc_update_bits(codec, PM860X_I2S_IFACE_4, I2S_EQU_BYP, + I2S_EQU_BYP); + snd_soc_write(codec, PM860X_EQUALIZER_N0_1, 0); + snd_soc_write(codec, PM860X_EQUALIZER_N0_2, 0); + snd_soc_write(codec, PM860X_EQUALIZER_N1_1, 0); + snd_soc_write(codec, PM860X_EQUALIZER_N1_2, 0); + snd_soc_write(codec, PM860X_EQUALIZER_D1_1, 0); + snd_soc_write(codec, PM860X_EQUALIZER_D1_2, 0); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, RSYNC_CHANGE, + RSYNC_CHANGE); + return 0; + case FILTER_LOW_PASS_1: + snd_soc_write(codec, PM860X_EQUALIZER_N0_1, 0xf3); + snd_soc_write(codec, PM860X_EQUALIZER_N0_2, 0x3a); + snd_soc_write(codec, PM860X_EQUALIZER_N1_1, 0xc3); + snd_soc_write(codec, PM860X_EQUALIZER_N1_2, 0xf4); + snd_soc_write(codec, PM860X_EQUALIZER_D1_1, 0xb5); + snd_soc_write(codec, PM860X_EQUALIZER_D1_2, 0xaf); + break; + case FILTER_LOW_PASS_2: + snd_soc_write(codec, PM860X_EQUALIZER_N0_1, 0x36); + snd_soc_write(codec, PM860X_EQUALIZER_N0_2, 0x42); + snd_soc_write(codec, PM860X_EQUALIZER_N1_1, 0x3c); + snd_soc_write(codec, PM860X_EQUALIZER_N1_2, 0xfb); + snd_soc_write(codec, PM860X_EQUALIZER_D1_1, 0x73); + snd_soc_write(codec, PM860X_EQUALIZER_D1_2, 0xbd); + break; + case FILTER_HIGH_PASS_3: + snd_soc_write(codec, PM860X_EQUALIZER_N0_1, 0x55); + snd_soc_write(codec, PM860X_EQUALIZER_N0_2, 0x39); + snd_soc_write(codec, PM860X_EQUALIZER_N1_1, 0x5a); + snd_soc_write(codec, PM860X_EQUALIZER_N1_2, 0xf3); + snd_soc_write(codec, PM860X_EQUALIZER_D1_1, 0x7e); + snd_soc_write(codec, PM860X_EQUALIZER_D1_2, 0x53); + break; + } + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, RSYNC_CHANGE, + RSYNC_CHANGE); + snd_soc_update_bits(codec, PM860X_I2S_IFACE_4, I2S_EQU_BYP, 0); + return 0; +} + +/* DAPM Widget Events */ +static int pm860x_rsync_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + /* unmute DAC */ + if (pm860x->automute) { + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, 0); + pm860x->automute = 0; + } + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_adc_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + unsigned int en1 = 0, en2 = 0; + + if (!strcmp(w->name, "Left ADC")) { + en1 = ADC_MOD_LEFT; + en2 = ADC_LEFT; + } + if (!strcmp(w->name, "Right ADC")) { + en1 = ADC_MOD_RIGHT; + en2 = ADC_RIGHT; + } + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, PM860X_ADC_EN_1, en1, en1); + snd_soc_update_bits(codec, PM860X_ADC_EN_2, en2, en2); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, PM860X_ADC_EN_1, en1, 0); + snd_soc_update_bits(codec, PM860X_ADC_EN_2, en2, 0); + break; + } + return 0; +} + +static int pm860x_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned int data, dac = 0; + + if (!strcmp(w->name, "Left DAC")) + dac = DAC_LEFT; + if (!strcmp(w->name, "Right DAC")) + dac = DAC_RIGHT; + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (dac) { + pm860x->automute = 1; + dac |= MODULATOR; + /* mute */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + /* update dac */ + snd_soc_update_bits(codec, PM860X_DAC_EN_2, + dac, dac); + } + break; + case SND_SOC_DAPM_PRE_PMD: + if (dac) { + pm860x->automute = 1; + /* mute */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + /* update dac */ + data = snd_soc_read(codec, PM860X_DAC_EN_2); + data &= ~dac; + if (!(data & (DAC_LEFT | DAC_RIGHT))) + data &= ~MODULATOR; + snd_soc_write(codec, PM860X_DAC_EN_2, data); + } + break; + } + return 0; +} + +static int pm860x_spk_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + dev_dbg(codec->dev, "event:%x\n", event); + return 0; +} + +static const char *pm860x_equalizer_texts[] = {"Filter Bypass", + "Low Pass Filter1", + "Low Pass Filter 2", + "High Pass Filter 3"}; + +static const struct soc_enum pm860x_equalizer_enum = + SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, ARRAY_SIZE(pm860x_equalizer_texts), + pm860x_equalizer_texts); +; + +static const char *pm860x_opamp_texts[] = {"-50%", "-25%", "0%", "75%"}; + +static const char *pm860x_pa_texts[] = {"-33%", "0%", "33%", "66%"}; + +static const struct soc_enum pm860x_enum[] = { + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 5, 4, pm860x_opamp_texts), + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 5, 4, pm860x_opamp_texts), + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 3, 4, pm860x_pa_texts), + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 3, 4, pm860x_pa_texts), + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 5, 4, pm860x_opamp_texts), + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 5, 4, pm860x_opamp_texts), + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 3, 4, pm860x_pa_texts), + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 3, 4, pm860x_pa_texts), + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 3, 4, pm860x_opamp_texts), + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 5, 4, pm860x_pa_texts), + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_2, 0, 4, pm860x_pa_texts), +}; + +static const struct snd_kcontrol_new pm860x_snd_controls[] = { + SOC_DOUBLE_R_TLV("ADC Capture Volume", PM860X_ADC_ANA_2, + PM860X_ADC_ANA_3, 6, 3, 0, adc_tlv), + SOC_DOUBLE_TLV("AUX Capture Volume", PM860X_ADC_ANA_3, 0, 3, 7, 0, + aux_tlv), + SOC_SINGLE_TLV("MIC1 Capture Volume", PM860X_ADC_ANA_2, 0, 7, 0, + mic_tlv), + SOC_SINGLE_TLV("MIC3 Capture Volume", PM860X_ADC_ANA_2, 3, 7, 0, + mic_tlv), + SOC_DOUBLE_R_EXT_TLV("Sidetone Capture Volume", PM860X_SIDETONE_L_GAIN, + PM860X_SIDETONE_R_GAIN, 0, ARRAY_SIZE(st_table)-1, + 0, snd_soc_get_volsw_2r_st, + snd_soc_put_volsw_2r_st, st_tlv), + SOC_SINGLE_TLV("Speaker Playback Volume", PM860X_EAR_CTRL_1, + 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Line Playback Volume", PM860X_LO1_CTRL, + PM860X_LO2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Headset Playback Volume", PM860X_HS1_CTRL, + PM860X_HS2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Left Playback Volume", + PM860X_HIFIL_GAIN_LEFT, + PM860X_HIFIL_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Right Playback Volume", + PM860X_HIFIR_GAIN_LEFT, + PM860X_HIFIR_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Lofi Playback Volume", PM860X_LOFI_GAIN_LEFT, + PM860X_LOFI_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_ENUM_EXT("Equalizer", pm860x_equalizer_enum, snd_soc_get_equalizer, + snd_soc_put_equalizer), + SOC_ENUM("Headset1 Operational Amplifier Current", pm860x_enum[0]), + SOC_ENUM("Headset2 Operational Amplifier Current", pm860x_enum[1]), + SOC_ENUM("Headset1 Amplifier Current", pm860x_enum[2]), + SOC_ENUM("Headset2 Amplifier Current", pm860x_enum[3]), + SOC_ENUM("Lineout1 Operational Amplifier Current", pm860x_enum[4]), + SOC_ENUM("Lineout2 Operational Amplifier Current", pm860x_enum[5]), + SOC_ENUM("Lineout1 Amplifier Current", pm860x_enum[6]), + SOC_ENUM("Lineout2 Amplifier Current", pm860x_enum[7]), + SOC_ENUM("Speaker Operational Amplifier Current", pm860x_enum[8]), + SOC_ENUM("Speaker Amplifier Current", pm860x_enum[9]), + SOC_ENUM("Earpiece Amplifier Current", pm860x_enum[10]), +}; + +/* + * DAPM Controls + */ + +/* PCM Switch / PCM Interface */ +static const struct snd_kcontrol_new pcm_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ADC_EN_2, 0, 1, 0); + +/* AUX1 Switch */ +static const struct snd_kcontrol_new aux1_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 4, 1, 0); + +/* AUX2 Switch */ +static const struct snd_kcontrol_new aux2_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 5, 1, 0); + +/* Left Ex. PA Switch */ +static const struct snd_kcontrol_new lepa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 2, 1, 0); + +/* Right Ex. PA Switch */ +static const struct snd_kcontrol_new repa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 1, 1, 0); + +/* PCM Mux / Mux7 */ +static const char *aif1_text[] = { + "PCM L", "PCM R", +}; + +static const struct soc_enum aif1_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 6, 2, aif1_text); + +static const struct snd_kcontrol_new aif1_mux = + SOC_DAPM_ENUM("PCM Mux", aif1_enum); + +/* I2S Mux / Mux9 */ +static const char *i2s_din_text[] = { + "DIN", "DIN1", +}; + +static const struct soc_enum i2s_din_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 1, 2, i2s_din_text); + +static const struct snd_kcontrol_new i2s_din_mux = + SOC_DAPM_ENUM("I2S DIN Mux", i2s_din_enum); + +/* I2S Mic Mux / Mux8 */ +static const char *i2s_mic_text[] = { + "Ex PA", "ADC", +}; + +static const struct soc_enum i2s_mic_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 4, 2, i2s_mic_text); + +static const struct snd_kcontrol_new i2s_mic_mux = + SOC_DAPM_ENUM("I2S Mic Mux", i2s_mic_enum); + +/* ADCL Mux / Mux2 */ +static const char *adcl_text[] = { + "ADCR", "ADCL", +}; + +static const struct soc_enum adcl_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 4, 2, adcl_text); + +static const struct snd_kcontrol_new adcl_mux = + SOC_DAPM_ENUM("ADC Left Mux", adcl_enum); + +/* ADCR Mux / Mux3 */ +static const char *adcr_text[] = { + "ADCL", "ADCR", +}; + +static const struct soc_enum adcr_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 2, 2, adcr_text); + +static const struct snd_kcontrol_new adcr_mux = + SOC_DAPM_ENUM("ADC Right Mux", adcr_enum); + +/* ADCR EC Mux / Mux6 */ +static const char *adcr_ec_text[] = { + "ADCR", "EC", +}; + +static const struct soc_enum adcr_ec_enum = + SOC_ENUM_SINGLE(PM860X_ADC_EN_2, 3, 2, adcr_ec_text); + +static const struct snd_kcontrol_new adcr_ec_mux = + SOC_DAPM_ENUM("ADCR EC Mux", adcr_ec_enum); + +/* EC Mux / Mux4 */ +static const char *ec_text[] = { + "Left", "Right", "Left + Right", +}; + +static const struct soc_enum ec_enum = + SOC_ENUM_SINGLE(PM860X_EC_PATH, 1, 3, ec_text); + +static const struct snd_kcontrol_new ec_mux = + SOC_DAPM_ENUM("EC Mux", ec_enum); + +static const char *dac_text[] = { + "No input", "Right", "Left", "No input", +}; + +/* DAC Headset 1 Mux / Mux10 */ +static const struct soc_enum dac_hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs1_mux = + SOC_DAPM_ENUM("DAC HS1 Mux", dac_hs1_enum); + +/* DAC Headset 2 Mux / Mux11 */ +static const struct soc_enum dac_hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 2, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs2_mux = + SOC_DAPM_ENUM("DAC HS2 Mux", dac_hs2_enum); + +/* DAC Lineout 1 Mux / Mux12 */ +static const struct soc_enum dac_lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 4, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo1_mux = + SOC_DAPM_ENUM("DAC LO1 Mux", dac_lo1_enum); + +/* DAC Lineout 2 Mux / Mux13 */ +static const struct soc_enum dac_lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 6, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo2_mux = + SOC_DAPM_ENUM("DAC LO2 Mux", dac_lo2_enum); + +/* DAC Spearker Earphone Mux / Mux14 */ +static const struct soc_enum dac_spk_ear_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_2, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_spk_ear_mux = + SOC_DAPM_ENUM("DAC SP Mux", dac_spk_ear_enum); + +/* Headset 1 Mux / Mux15 */ +static const char *in_text[] = { + "DIGITAL", "ANALOG", +}; + +static const struct soc_enum hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 0, 2, in_text); + +static const struct snd_kcontrol_new hs1_mux = + SOC_DAPM_ENUM("Headset1 Mux", hs1_enum); + +/* Headset 2 Mux / Mux16 */ +static const struct soc_enum hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 1, 2, in_text); + +static const struct snd_kcontrol_new hs2_mux = + SOC_DAPM_ENUM("Headset2 Mux", hs2_enum); + +/* Lineout 1 Mux / Mux17 */ +static const struct soc_enum lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 2, 2, in_text); + +static const struct snd_kcontrol_new lo1_mux = + SOC_DAPM_ENUM("Lineout1 Mux", lo1_enum); + +/* Lineout 2 Mux / Mux18 */ +static const struct soc_enum lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 3, 2, in_text); + +static const struct snd_kcontrol_new lo2_mux = + SOC_DAPM_ENUM("Lineout2 Mux", lo2_enum); + +/* Speaker Earpiece Demux */ +static const char *spk_text[] = { + "Earpiece", "Speaker", +}; + +static const struct soc_enum spk_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 6, 2, spk_text); + +static const struct snd_kcontrol_new spk_demux = + SOC_DAPM_ENUM("Speaker Earpiece Demux", spk_enum); + +/* MIC Mux / Mux1 */ +static const char *mic_text[] = { + "Mic 1", "Mic 2", +}; + +static const struct soc_enum mic_enum = + SOC_ENUM_SINGLE(PM860X_ADC_ANA_4, 4, 2, mic_text); + +static const struct snd_kcontrol_new mic_mux = + SOC_DAPM_ENUM("MIC Mux", mic_enum); + +static const struct snd_soc_dapm_widget pm860x_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("PCM SDI", "PCM Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("PCM SDO", "PCM Capture", 0, + PM860X_PCM_IFACE_3, 1, 1), + + + SND_SOC_DAPM_AIF_IN("I2S DIN", "I2S Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("I2S DIN1", "I2S Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("I2S DOUT", "I2S Capture", 0, + PM860X_I2S_IFACE_3, 5, 1), + SND_SOC_DAPM_MUX("I2S Mic Mux", SND_SOC_NOPM, 0, 0, &i2s_mic_mux), + SND_SOC_DAPM_MUX("ADC Left Mux", SND_SOC_NOPM, 0, 0, &adcl_mux), + SND_SOC_DAPM_MUX("ADC Right Mux", SND_SOC_NOPM, 0, 0, &adcr_mux), + SND_SOC_DAPM_MUX("EC Mux", SND_SOC_NOPM, 0, 0, &ec_mux), + SND_SOC_DAPM_MUX("ADCR EC Mux", SND_SOC_NOPM, 0, 0, &adcr_ec_mux), + SND_SOC_DAPM_SWITCH("Left EPA", SND_SOC_NOPM, 0, 0, + &lepa_switch_controls), + SND_SOC_DAPM_SWITCH("Right EPA", SND_SOC_NOPM, 0, 0, + &repa_switch_controls), + + SND_SOC_DAPM_ADC_E("Left ADC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_adc_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_ADC_E("Right ADC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_adc_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_SWITCH("AUX1 Switch", SND_SOC_NOPM, 0, 0, + &aux1_switch_controls), + SND_SOC_DAPM_SWITCH("AUX2 Switch", SND_SOC_NOPM, 0, 0, + &aux2_switch_controls), + + SND_SOC_DAPM_MUX("MIC Mux", SND_SOC_NOPM, 0, 0, &mic_mux), + SND_SOC_DAPM_MICBIAS("Mic1 Bias", PM860X_ADC_ANA_1, 2, 0), + SND_SOC_DAPM_MICBIAS("Mic3 Bias", PM860X_ADC_ANA_1, 7, 0), + SND_SOC_DAPM_PGA("MIC1 Volume", PM860X_ADC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("MIC3 Volume", PM860X_ADC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX1 Volume", PM860X_ADC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX2 Volume", PM860X_ADC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("Sidetone PGA", PM860X_ADC_EN_2, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lofi PGA", PM860X_ADC_EN_2, 2, 0, NULL, 0), + + SND_SOC_DAPM_INPUT("AUX1"), + SND_SOC_DAPM_INPUT("AUX2"), + SND_SOC_DAPM_INPUT("MIC1P"), + SND_SOC_DAPM_INPUT("MIC1N"), + SND_SOC_DAPM_INPUT("MIC2P"), + SND_SOC_DAPM_INPUT("MIC2N"), + SND_SOC_DAPM_INPUT("MIC3P"), + SND_SOC_DAPM_INPUT("MIC3N"), + + SND_SOC_DAPM_DAC_E("Left DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_DAC_E("Right DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_MUX("I2S DIN Mux", SND_SOC_NOPM, 0, 0, &i2s_din_mux), + SND_SOC_DAPM_MUX("DAC HS1 Mux", SND_SOC_NOPM, 0, 0, &dac_hs1_mux), + SND_SOC_DAPM_MUX("DAC HS2 Mux", SND_SOC_NOPM, 0, 0, &dac_hs2_mux), + SND_SOC_DAPM_MUX("DAC LO1 Mux", SND_SOC_NOPM, 0, 0, &dac_lo1_mux), + SND_SOC_DAPM_MUX("DAC LO2 Mux", SND_SOC_NOPM, 0, 0, &dac_lo2_mux), + SND_SOC_DAPM_MUX("DAC SP Mux", SND_SOC_NOPM, 0, 0, &dac_spk_ear_mux), + SND_SOC_DAPM_MUX("Headset1 Mux", SND_SOC_NOPM, 0, 0, &hs1_mux), + SND_SOC_DAPM_MUX("Headset2 Mux", SND_SOC_NOPM, 0, 0, &hs2_mux), + SND_SOC_DAPM_MUX("Lineout1 Mux", SND_SOC_NOPM, 0, 0, &lo1_mux), + SND_SOC_DAPM_MUX("Lineout2 Mux", SND_SOC_NOPM, 0, 0, &lo2_mux), + SND_SOC_DAPM_MUX_E("Speaker Earpiece Demux", SND_SOC_NOPM, 0, 0, + &spk_demux, pm860x_spk_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + + SND_SOC_DAPM_PGA("Headset1 PGA", PM860X_DAC_EN_1, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Headset2 PGA", PM860X_DAC_EN_1, 1, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("HS1"), + SND_SOC_DAPM_OUTPUT("HS2"), + SND_SOC_DAPM_PGA("Lineout1 PGA", PM860X_DAC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lineout2 PGA", PM860X_DAC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LINEOUT1"), + SND_SOC_DAPM_OUTPUT("LINEOUT2"), + SND_SOC_DAPM_PGA("Earpiece PGA", PM860X_DAC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("EARP"), + SND_SOC_DAPM_OUTPUT("EARN"), + SND_SOC_DAPM_PGA("Speaker PGA", PM860X_DAC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LSP"), + SND_SOC_DAPM_OUTPUT("LSN"), + + SND_SOC_DAPM_POST("RSYNC", pm860x_rsync_event), + +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* PCM/AIF1 Inputs */ + {"PCM SDO", NULL, "ADC Left Mux"}, + {"PCM SDO", NULL, "ADCR EC Mux"}, + + /* PCM/AFI2 Outputs */ + {"Lofi PGA", NULL, "PCM SDI"}, + {"Lofi PGA", NULL, "Sidetone PGA"}, + {"Left DAC", NULL, "Lofi PGA"}, + {"Right DAC", NULL, "Lofi PGA"}, + + /* I2S/AIF2 Inputs */ + {"MIC Mux", "Mic 1", "MIC1P"}, + {"MIC Mux", "Mic 1", "MIC1N"}, + {"MIC Mux", "Mic 2", "MIC2P"}, + {"MIC Mux", "Mic 2", "MIC2N"}, + {"MIC1 Volume", NULL, "MIC Mux"}, + {"MIC3 Volume", NULL, "MIC3P"}, + {"MIC3 Volume", NULL, "MIC3N"}, + {"Left ADC", NULL, "MIC1 Volume"}, + {"Right ADC", NULL, "MIC3 Volume"}, + {"ADC Left Mux", "ADCR", "Right ADC"}, + {"ADC Left Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCR", "Right ADC"}, + {"Left EPA", "Switch", "Left DAC"}, + {"Right EPA", "Switch", "Right DAC"}, + {"EC Mux", "Left", "Left DAC"}, + {"EC Mux", "Right", "Right DAC"}, + {"EC Mux", "Left + Right", "Left DAC"}, + {"EC Mux", "Left + Right", "Right DAC"}, + {"ADCR EC Mux", "ADCR", "ADC Right Mux"}, + {"ADCR EC Mux", "EC", "EC Mux"}, + {"I2S Mic Mux", "Ex PA", "Left EPA"}, + {"I2S Mic Mux", "Ex PA", "Right EPA"}, + {"I2S Mic Mux", "ADC", "ADC Left Mux"}, + {"I2S Mic Mux", "ADC", "ADCR EC Mux"}, + {"I2S DOUT", NULL, "I2S Mic Mux"}, + + /* I2S/AIF2 Outputs */ + {"I2S DIN Mux", "DIN", "I2S DIN"}, + {"I2S DIN Mux", "DIN1", "I2S DIN1"}, + {"Left DAC", NULL, "I2S DIN Mux"}, + {"Right DAC", NULL, "I2S DIN Mux"}, + {"DAC HS1 Mux", "Left", "Left DAC"}, + {"DAC HS1 Mux", "Right", "Right DAC"}, + {"DAC HS2 Mux", "Left", "Left DAC"}, + {"DAC HS2 Mux", "Right", "Right DAC"}, + {"DAC LO1 Mux", "Left", "Left DAC"}, + {"DAC LO1 Mux", "Right", "Right DAC"}, + {"DAC LO2 Mux", "Left", "Left DAC"}, + {"DAC LO2 Mux", "Right", "Right DAC"}, + {"Headset1 Mux", "DIGITAL", "DAC HS1 Mux"}, + {"Headset2 Mux", "DIGITAL", "DAC HS2 Mux"}, + {"Lineout1 Mux", "DIGITAL", "DAC LO1 Mux"}, + {"Lineout2 Mux", "DIGITAL", "DAC LO2 Mux"}, + {"Headset1 PGA", NULL, "Headset1 Mux"}, + {"Headset2 PGA", NULL, "Headset2 Mux"}, + {"Lineout1 PGA", NULL, "Lineout1 Mux"}, + {"Lineout2 PGA", NULL, "Lineout2 Mux"}, + {"DAC SP Mux", "Left", "Left DAC"}, + {"DAC SP Mux", "Right", "Right DAC"}, + {"Speaker Earpiece Demux", "Speaker", "DAC SP Mux"}, + {"Speaker PGA", NULL, "Speaker Earpiece Demux"}, + {"Earpiece PGA", NULL, "Speaker Earpiece Demux"}, + + {"HS1", NULL, "Headset1 PGA"}, + {"HS2", NULL, "Headset2 PGA"}, + {"LINEOUT1", NULL, "Lineout1 PGA"}, + {"LINEOUT2", NULL, "Lineout2 PGA"}, + {"LSP", NULL, "Speaker PGA"}, + {"LSN", NULL, "Speaker PGA"}, + {"EARP", NULL, "Earpiece PGA"}, + {"EARN", NULL, "Earpiece PGA"}, +}; + +static int pm860x_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int data = 0; + + if (mute) + data = DAC_MUTE; + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, data); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int set_dai_fmt(struct pm860x_priv *pm860x, unsigned int fmt, + unsigned char *inf, unsigned char *mask) +{ + int ret = 0; + + *mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + if (pm860x->dir == PM860X_CLK_DIR_OUT) + *inf |= PCM_INF2_MASTER; + else + ret = -EINVAL; + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) + *inf &= ~PCM_INF2_MASTER; + else + ret = -EINVAL; + break; + default: + ret = -EINVAL; + break; + } + if (ret) + return ret; + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + *inf |= PCM_EXACT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + *inf |= PCM_LEFT_I2S; + break; + case SND_SOC_DAIFMT_RIGHT_J: + *inf |= PCM_RIGHT_I2S; + break; + default: + return -EINVAL; + } + *mask |= PCM_MODE_MASK; + return 0; +} + +static int pm860x_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf = 0, mask = 0; + int data; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf &= ~PCM_INF2_18WL; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf |= PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + mask |= PCM_INF2_18WL; + data = snd_soc_read(codec, PM860X_PCM_IFACE_2) & ~mask; + data |= inf; + snd_soc_write(codec, PM860X_PCM_IFACE_2, data); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 16000: + inf = 3; + break; + case 32000: + inf = 6; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_PCM_RATE, 0x0f, inf); + + /* enable PCM interface */ + snd_soc_update_bits(codec, PM860X_ADC_EN_2, 1, 1); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + + /* disable PCM interface */ + snd_soc_update_bits(codec, PM860X_ADC_EN_2, 1, 0); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int data, ret; + + ret = set_dai_fmt(pm860x, fmt, &inf, &mask); + if (!ret) { + data = snd_soc_read(codec, PM860X_PCM_IFACE_2) & ~mask; + data |= inf; + snd_soc_write(codec, PM860X_PCM_IFACE_2, data); + } + return ret; +} + +static int pm860x_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + if (dir == PM860X_CLK_DIR_OUT) + pm860x->dir = PM860X_CLK_DIR_OUT; + else + pm860x->dir = PM860X_CLK_DIR_IN; + + return 0; +} + +static int pm860x_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf; + int data; + + /* + * Enable LDO15 for VDD_CODEC, audio charger pump for VDDSTP/VDDSTN + * and reset audio module. + */ + data = LDO15_EN | CPUMP_EN | AUDIO_EN; + snd_soc_update_bits(codec, PM860X_AUDIO_SUPPLIES_2, data, data); + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf = 0; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf = PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, PCM_INF2_18WL, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 11025: + inf = 1; + break; + case 16000: + inf = 3; + break; + case 22050: + inf = 4; + break; + case 32000: + inf = 6; + break; + case 44100: + inf = 7; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_4, 0xf, inf); + + /* enable I2S interface */ + snd_soc_update_bits(codec, PM860X_DAC_EN_2, 1, 1); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_i2s_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + int data; + + /* disable I2S interface */ + snd_soc_update_bits(codec, PM860X_DAC_EN_2, 1, 0); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + + /* + * Disable LDO15 for VDD_CODEC, audio charger pump for VDDSTP/VDDSTN + * and reset audio module. + */ + data = LDO15_EN | CPUMP_EN | AUDIO_EN; + snd_soc_update_bits(codec, PM860X_AUDIO_SUPPLIES_2, data, 0); + return 0; +} + +static int pm860x_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int data, ret; + + ret = set_dai_fmt(pm860x, fmt, &inf, &mask); + if (!ret) { + data = snd_soc_read(codec, PM860X_I2S_IFACE_2) & ~mask; + data |= inf; + snd_soc_write(codec, PM860X_I2S_IFACE_2, data); + } + return ret; +} + +static int pm860x_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int data; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Enable Audio PLL & Audio section */ + data = AUDIO_PLL | AUDIO_SECTION_RESET + | AUDIO_SECTION_ON; + pm860x_reg_write(codec->control_data, REG_MISC2, data); + + /* Enable Mic1 Bias & MICDET, HSDET */ + pm860x_set_bits(codec->control_data, REG_ADC_ANA_1, + MIC1BIAS_MASK, MIC1BIAS_MASK); + pm860x_set_bits(codec->control_data, REG_MIC_DET, + MICDET_MASK, MICDET_MASK); + pm860x_set_bits(codec->control_data, REG_HS_DET, + EN_HS_DET, EN_HS_DET); + } + break; + + case SND_SOC_BIAS_OFF: + /* disable Mic1 Bias & MICDET, HSDET */ + pm860x_set_bits(codec->control_data, REG_MIC_DET, + MICDET_MASK, 0); + pm860x_set_bits(codec->control_data, REG_HS_DET, + EN_HS_DET, 0); + pm860x_set_bits(codec->control_data, REG_ADC_ANA_1, + MIC1BIAS_MASK, 0); + data = AUDIO_PLL | AUDIO_SECTION_RESET | AUDIO_SECTION_ON; + pm860x_set_bits(codec->control_data, REG_MISC2, data, 0); + break; + } + codec->bias_level = level; + return 0; +} + +static struct snd_soc_dai_ops pm860x_pcm_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_pcm_hw_params, + .hw_free = pm860x_pcm_hw_free, + .set_fmt = pm860x_pcm_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops pm860x_i2s_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_i2s_hw_params, + .hw_free = pm860x_i2s_hw_free, + .set_fmt = pm860x_i2s_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +#define PM860X_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000) + +struct snd_soc_dai_driver pm860x_dai[] = { + { + /* DAI PCM */ + .name = "88pm860x-pcm", + .id = 1, + .playback = { + .stream_name = "PCM Playback", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "PCM Capture", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_pcm_dai_ops, + }, { + /* DAI I2S */ + .name = "88pm860x-i2s", + .id = 2, + .playback = { + .stream_name = "I2S Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "I2S Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_i2s_dai_ops, + }, +}; +EXPORT_SYMBOL_GPL(pm860x_dai); + +static irqreturn_t pm860x_codec_handler(int irq, void *data) +{ + struct pm860x_priv *pm860x = data; + int status, shrt, report = 0; + + status = pm860x_reg_read(pm860x->i2c, REG_STATUS_1); + shrt = pm860x_reg_read(pm860x->i2c, REG_SHORTS); + + if (pm860x->hsdet.det & PM860X_DET_HEADSET) { + if (status & HEADSET_STATUS) + report |= PM860X_DET_HEADSET; + } + if (pm860x->hsdet.det & PM860X_DET_MIC) { + if (status & MIC_STATUS) + report |= PM860X_DET_MIC; + } + if (pm860x->hsdet.det & PM860X_DET_HOOK) { + if (status & HOOK_STATUS) + report |= PM860X_DET_HOOK; + } + if (pm860x->hsdet.det & PM860X_SHORT_LINEOUT) { + if (shrt & (SHORT_LO1 | SHORT_LO2)) + report |= PM860X_SHORT_LINEOUT; + } + if (pm860x->hsdet.det & PM860X_SHORT_HEADSET) { + if (shrt & (SHORT_HS1 | SHORT_HS2)) + report |= PM860X_SHORT_HEADSET; + } + snd_soc_jack_report(pm860x->hsdet.jack, report, PM860X_DET_MASK); + dev_dbg(pm860x->codec->dev, "report:0x%x\n", report); + return IRQ_HANDLED; +} + +/* + * Enable headset detection via 88PM860x IRQ + * + * Enable headset detection via IRQ on 88PM860x. If GPIOs are being used to + * bring out signals to the processor then processor GPIOs should be + * configured using snd_soc_jack_add_gpios() instead. + */ +int pm860x_hs_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, + int det) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + if (!jack) { + dev_err(codec->dev, "Wrong jack is specified\n"); + return -EINVAL; + } + pm860x->hsdet.jack = jack; + pm860x->hsdet.det = det; + + pm860x_codec_handler(0, pm860x); + return 0; +} +EXPORT_SYMBOL_GPL(pm860x_hs_detect); + +static int pm860x_probe(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i, ret; + + pm860x->codec = codec; + + codec->control_data = pm860x->i2c; + + for (i = 0; i < 4; i++) { + ret = request_threaded_irq(pm860x->irq[i], NULL, + pm860x_codec_handler, IRQF_ONESHOT, + pm860x->name[i], pm860x); + if (ret < 0) { + dev_err(codec->dev, "Failed to request IRQ!\n"); + goto out_irq; + } + } + + pm860x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + ret = pm860x_bulk_read(codec->control_data, REG_CACHE_BASE, + REG_CACHE_SIZE, codec->reg_cache); + if (ret < 0) { + dev_err(codec->dev, "Failed to fill register cache: %d\n", + ret); + goto out_codec; + } + + snd_soc_add_controls(codec, pm860x_snd_controls, + ARRAY_SIZE(pm860x_snd_controls)); + snd_soc_dapm_new_controls(codec, pm860x_dapm_widgets, + ARRAY_SIZE(pm860x_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + return 0; + +out_codec: + i = 3; +out_irq: + for (; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + return -EINVAL; +} + +static int pm860x_remove(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i; + + for (i = 3; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + pm860x_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_pm860x = { + .probe = pm860x_probe, + .remove = pm860x_remove, + .read = pm860x_read_reg_cache, + .write = pm860x_write_reg_cache, + .reg_cache_size = REG_CACHE_SIZE, + .reg_word_size = sizeof(u8), + .set_bias_level = pm860x_set_bias_level, +}; + +static int __devinit pm860x_codec_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_priv *pm860x; + struct resource *res; + int i, ret; + + pm860x = kzalloc(sizeof(struct pm860x_priv), GFP_KERNEL); + if (pm860x == NULL) + return -ENOMEM; + + pm860x->chip = chip; + pm860x->i2c = (chip->id == CHIP_PM8607) ? chip->client + : chip->companion; + platform_set_drvdata(pdev, pm860x); + + for (i = 0; i < 4; i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + if (!res) { + dev_err(&pdev->dev, "Failed to get IRQ resources\n"); + goto out; + } + pm860x->irq[i] = res->start + chip->irq_base; + strncpy(pm860x->name[i], res->name, MAX_NAME_LEN); + } + + ret = snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pm860x, + pm860x_dai, ARRAY_SIZE(pm860x_dai)); + if (ret) { + dev_err(&pdev->dev, "Failed to register codec\n"); + goto out; + } + return ret; + +out: + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return -EINVAL; +} + +static int __devexit pm860x_codec_remove(struct platform_device *pdev) +{ + struct pm860x_priv *pm860x = platform_get_drvdata(pdev); + + snd_soc_unregister_codec(&pdev->dev); + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return 0; +} + +static struct platform_driver pm860x_codec_driver = { + .driver = { + .name = "88pm860x-codec", + .owner = THIS_MODULE, + }, + .probe = pm860x_codec_probe, + .remove = __devexit_p(pm860x_codec_remove), +}; + +static __init int pm860x_init(void) +{ + return platform_driver_register(&pm860x_codec_driver); +} +module_init(pm860x_init); + +static __exit void pm860x_exit(void) +{ + platform_driver_unregister(&pm860x_codec_driver); +} +module_exit(pm860x_exit); + +MODULE_DESCRIPTION("ASoC 88PM860x driver"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-codec"); + diff --git a/sound/soc/codecs/88pm860x-codec.h b/sound/soc/codecs/88pm860x-codec.h new file mode 100644 index 0000000..8094669 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.h @@ -0,0 +1,97 @@ +/* + * 88pm860x-codec.h -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __88PM860X_H +#define __88PM860X_H + +/* The offset of these registers are 0xb0 */ +#define PM860X_PCM_IFACE_1 0x00 +#define PM860X_PCM_IFACE_2 0x01 +#define PM860X_PCM_IFACE_3 0x02 +#define PM860X_PCM_RATE 0x03 +#define PM860X_EC_PATH 0x04 +#define PM860X_SIDETONE_L_GAIN 0x05 +#define PM860X_SIDETONE_R_GAIN 0x06 +#define PM860X_SIDETONE_SHIFT 0x07 +#define PM860X_ADC_OFFSET_1 0x08 +#define PM860X_ADC_OFFSET_2 0x09 +#define PM860X_DMIC_DELAY 0x0a + +#define PM860X_I2S_IFACE_1 0x0b +#define PM860X_I2S_IFACE_2 0x0c +#define PM860X_I2S_IFACE_3 0x0d +#define PM860X_I2S_IFACE_4 0x0e +#define PM860X_EQUALIZER_N0_1 0x0f +#define PM860X_EQUALIZER_N0_2 0x10 +#define PM860X_EQUALIZER_N1_1 0x11 +#define PM860X_EQUALIZER_N1_2 0x12 +#define PM860X_EQUALIZER_D1_1 0x13 +#define PM860X_EQUALIZER_D1_2 0x14 +#define PM860X_LOFI_GAIN_LEFT 0x15 +#define PM860X_LOFI_GAIN_RIGHT 0x16 +#define PM860X_HIFIL_GAIN_LEFT 0x17 +#define PM860X_HIFIL_GAIN_RIGHT 0x18 +#define PM860X_HIFIR_GAIN_LEFT 0x19 +#define PM860X_HIFIR_GAIN_RIGHT 0x1a +#define PM860X_DAC_OFFSET 0x1b +#define PM860X_OFFSET_LEFT_1 0x1c +#define PM860X_OFFSET_LEFT_2 0x1d +#define PM860X_OFFSET_RIGHT_1 0x1e +#define PM860X_OFFSET_RIGHT_2 0x1f +#define PM860X_ADC_ANA_1 0x20 +#define PM860X_ADC_ANA_2 0x21 +#define PM860X_ADC_ANA_3 0x22 +#define PM860X_ADC_ANA_4 0x23 +#define PM860X_ANA_TO_ANA 0x24 +#define PM860X_HS1_CTRL 0x25 +#define PM860X_HS2_CTRL 0x26 +#define PM860X_LO1_CTRL 0x27 +#define PM860X_LO2_CTRL 0x28 +#define PM860X_EAR_CTRL_1 0x29 +#define PM860X_EAR_CTRL_2 0x2a +#define PM860X_AUDIO_SUPPLIES_1 0x2b +#define PM860X_AUDIO_SUPPLIES_2 0x2c +#define PM860X_ADC_EN_1 0x2d +#define PM860X_ADC_EN_2 0x2e +#define PM860X_DAC_EN_1 0x2f +#define PM860X_DAC_EN_2 0x31 +#define PM860X_AUDIO_CAL_1 0x32 +#define PM860X_AUDIO_CAL_2 0x33 +#define PM860X_AUDIO_CAL_3 0x34 +#define PM860X_AUDIO_CAL_4 0x35 +#define PM860X_AUDIO_CAL_5 0x36 +#define PM860X_ANA_INPUT_SEL_1 0x37 +#define PM860X_ANA_INPUT_SEL_2 0x38 + +#define PM860X_PCM_IFACE_4 0x39 +#define PM860X_I2S_IFACE_5 0x3a + +#define PM860X_SHORTS 0x3b +#define PM860X_PLL_ADJ_1 0x3c +#define PM860X_PLL_ADJ_2 0x3d + +/* bits definition */ +#define MUTE_ALL (1 << 7) + +#define PM860X_CLK_DIR_IN 0 +#define PM860X_CLK_DIR_OUT 1 + +#define PM860X_DET_HEADSET (1 << 0) +#define PM860X_DET_MIC (1 << 1) +#define PM860X_DET_HOOK (1 << 2) +#define PM860X_SHORT_HEADSET (1 << 3) +#define PM860X_SHORT_LINEOUT (1 << 4) +#define PM860X_DET_MASK 0x1F + +extern int pm860x_hs_detect(struct snd_soc_codec *, struct snd_soc_jack *, + int); + +#endif /* __88PM860X_H */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index bfdd92b..a3cfc18 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -10,6 +10,7 @@ config SND_SOC_I2C_AND_SPI config SND_SOC_ALL_CODECS tristate "Build all ASoC CODEC drivers" + select SND_SOC_88PM860X if MFD_88PM860X select SND_SOC_L3 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS select SND_SOC_AD1836 if SPI_MASTER @@ -85,6 +86,9 @@ config SND_SOC_ALL_CODECS If unsure select "N". +config SND_SOC_88PM860X + tristate + config SND_SOC_WM_HUBS tristate default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 9c3c39f..b9c4358 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,3 +1,4 @@ +snd-soc-88pm860x-objs := 88pm860x-codec.o snd-soc-ac97-objs := ac97.o snd-soc-ad1836-objs := ad1836.o snd-soc-ad193x-objs := ad193x.o @@ -67,6 +68,7 @@ snd-soc-tpa6130a2-objs := tpa6130a2.o snd-soc-wm2000-objs := wm2000.o snd-soc-wm9090-objs := wm9090.o +obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o -- 1.5.6.5

1 0

[PATCH 1/3] ASoC: add 88pm860x codec driver
by Haojian Zhuang 12 Aug '10

12 Aug '10

Add 88PM860x codec driver. 88PM860x codec supports two interfaces. And it also supports headset/mic/hook/short detection. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/codecs/88pm860x-codec.c | 1493 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/88pm860x-codec.h | 97 +++ sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + 4 files changed, 1596 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/88pm860x-codec.c create mode 100644 sound/soc/codecs/88pm860x-codec.h diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c new file mode 100644 index 0000000..1cc7565 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.c @@ -0,0 +1,1493 @@ +/* + * 88pm860x-codec.c -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Author: Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/mfd/88pm860x.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> +#include <sound/jack.h> + +#include "88pm860x-codec.h" + +#define MAX_NAME_LEN 20 +#define REG_CACHE_SIZE 0x40 +#define REG_CACHE_BASE 0xb0 + +/* Status Register 1 (0x01) */ +#define REG_STATUS_1 0x01 +#define MIC_STATUS (1 << 7) +#define HOOK_STATUS (1 << 6) +#define HEADSET_STATUS (1 << 5) + +/* Mic Detection Register (0x37) */ +#define REG_MIC_DET 0x37 +#define CONTINUOUS_POLLING (3 << 1) +#define EN_MIC_DET (1 << 0) +#define MICDET_MASK 0x07 + +/* Headset Detection Register (0x38) */ +#define REG_HS_DET 0x38 +#define EN_HS_DET (1 << 0) + +/* Misc2 Register (0x42) */ +#define REG_MISC2 0x42 +#define AUDIO_PLL (1 << 5) +#define AUDIO_SECTION_RESET (1 << 4) +#define AUDIO_SECTION_ON (1 << 3) + +/* PCM Interface Register 2 (0xb1) */ +#define PCM_INF2_BCLK (1 << 6) /* Bit clock polarity */ +#define PCM_INF2_FS (1 << 5) /* Frame Sync polarity */ +#define PCM_INF2_MASTER (1 << 4) /* Master / Slave */ +#define PCM_INF2_18WL (1 << 3) /* 18 / 16 bits */ +#define PCM_GENERAL_I2S 0 +#define PCM_EXACT_I2S 1 +#define PCM_LEFT_I2S 2 +#define PCM_RIGHT_I2S 3 +#define PCM_SHORT_FS 4 +#define PCM_LONG_FS 5 +#define PCM_MODE_MASK 7 + +/* I2S Interface Register 4 (0xbe) */ +#define I2S_EQU_BYP (1 << 6) + +/* DAC Offset Register (0xcb) */ +#define DAC_MUTE (1 << 7) + +/* ADC Analog Register 1 (0xd0) */ +#define REG_ADC_ANA_1 0xd0 +#define MIC1BIAS_MASK 0x60 + +/* Earpiece/Speaker Control Register 2 (0xda) */ +#define REG_EAR2 0xda +#define RSYNC_CHANGE (1 << 2) + +/* Audio Supplies Register 2 (0xdc) */ +#define REG_SUPPLIES2 0xdc +#define LDO15_READY (1 << 4) +#define LDO15_EN (1 << 3) +#define CPUMP_READY (1 << 2) +#define CPUMP_EN (1 << 1) +#define AUDIO_EN (1 << 0) +#define SUPPLY_MASK (LDO15_EN | CPUMP_EN | AUDIO_EN) + +/* Audio Enable Register 1 (0xdd) */ +#define ADC_MOD_RIGHT (1 << 1) +#define ADC_MOD_LEFT (1 << 0) + +/* Audio Enable Register 2 (0xde) */ +#define ADC_LEFT (1 << 5) +#define ADC_RIGHT (1 << 4) + +/* DAC Enable Register 2 (0xe1) */ +#define DAC_LEFT (1 << 5) +#define DAC_RIGHT (1 << 4) +#define MODULATOR (1 << 3) + +/* Shorts Register (0xeb) */ +#define REG_SHORTS 0xeb +#define CLR_SHORT_LO2 (1 << 7) +#define SHORT_LO2 (1 << 6) +#define CLR_SHORT_LO1 (1 << 5) +#define SHORT_LO1 (1 << 4) +#define CLR_SHORT_HS2 (1 << 3) +#define SHORT_HS2 (1 << 2) +#define CLR_SHORT_HS1 (1 << 1) +#define SHORT_HS1 (1 << 0) + +#define PM860X_DAPM_OUTPUT(wname, wevent) \ +{ .id = snd_soc_dapm_output, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD, } + +struct pm860x_det { + struct snd_soc_jack *jack; + int hs_det; + int hs_shrt; + int hook_det; + int lo_shrt; +}; + +struct pm860x_priv { + unsigned int sysclk; + unsigned int pcmclk; + unsigned int dir; + unsigned int automute; + unsigned int filter; + struct snd_soc_codec *codec; + struct i2c_client *i2c; + struct pm860x_chip *chip; + struct mutex mutex; + struct pm860x_det det; + + int irq[4]; + unsigned char name[4][MAX_NAME_LEN]; + unsigned char reg_cache[REG_CACHE_SIZE]; +}; + +/* -9450dB to 0dB in 150dB steps ( mute instead of -9450dB) */ +static const DECLARE_TLV_DB_SCALE(dpga_tlv, -9450, 150, 1); + +/* -9dB to 0db in 3dB steps */ +static const DECLARE_TLV_DB_SCALE(adc_tlv, -900, 300, 0); + +/* {-23, -17, -13.5, -11, -9, -6, -3, 0}dB */ +static const unsigned int mic_tlv[] = { + TLV_DB_RANGE_HEAD(5), + 0, 0, TLV_DB_SCALE_ITEM(-2300, 0, 0), + 1, 1, TLV_DB_SCALE_ITEM(-1700, 0, 0), + 2, 2, TLV_DB_SCALE_ITEM(-1350, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(-1100, 0, 0), + 4, 7, TLV_DB_SCALE_ITEM(-900, 300, 0), +}; + +/* {0, 0, 0, -6, 0, 6, 12, 18}dB */ +static const unsigned int aux_tlv[] = { + TLV_DB_RANGE_HEAD(2), + 0, 2, TLV_DB_SCALE_ITEM(0, 0, 0), + 3, 7, TLV_DB_SCALE_ITEM(-600, 600, 0), +}; + +/* {-16, -13, -10, -7, -5.2, -3,3, -2.2, 0}dB, mute instead of -16dB */ +static const unsigned int out_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 3, TLV_DB_SCALE_ITEM(-1600, 300, 1), + 4, 4, TLV_DB_SCALE_ITEM(-520, 0, 0), + 5, 5, TLV_DB_SCALE_ITEM(-330, 0, 0), + 6, 7, TLV_DB_SCALE_ITEM(-220, 220, 0), +}; + +static const unsigned int st_tlv[] = { + TLV_DB_RANGE_HEAD(8), + 0, 1, TLV_DB_SCALE_ITEM(-12041, 602, 0), + 2, 3, TLV_DB_SCALE_ITEM(-11087, 250, 0), + 4, 5, TLV_DB_SCALE_ITEM(-10643, 158, 0), + 6, 7, TLV_DB_SCALE_ITEM(-10351, 116, 0), + 8, 9, TLV_DB_SCALE_ITEM(-10133, 92, 0), + 10, 13, TLV_DB_SCALE_ITEM(-9958, 70, 0), + 14, 17, TLV_DB_SCALE_ITEM(-9689, 53, 0), + 18, 271, TLV_DB_SCALE_ITEM(-9484, 37, 0), +}; + +/* Sidetone Gain = M * 2^(-5-N) */ +struct st_gain { + unsigned int db; + unsigned int m; + unsigned int n; +}; + +static struct st_gain st_table[] = { + {-12041, 1, 15}, {-11439, 1, 14}, {-11087, 3, 15}, {-10837, 1, 13}, + {-10643, 5, 15}, {-10485, 3, 14}, {-10351, 7, 15}, {-10235, 1, 12}, + {-10133, 9, 15}, {-10041, 5, 14}, { -9958, 11, 15}, { -9883, 3, 13}, + { -9813, 13, 15}, { -9749, 7, 14}, { -9689, 15, 15}, { -9633, 1, 11}, + { -9580, 17, 15}, { -9531, 9, 14}, { -9484, 19, 15}, { -9439, 5, 13}, + { -9397, 21, 15}, { -9356, 11, 14}, { -9318, 23, 15}, { -9281, 3, 12}, + { -9245, 25, 15}, { -9211, 13, 14}, { -9178, 27, 15}, { -9147, 7, 13}, + { -9116, 29, 15}, { -9087, 15, 14}, { -9058, 31, 15}, { -9031, 1, 10}, + { -8978, 17, 14}, { -8929, 9, 13}, { -8882, 19, 14}, { -8837, 5, 12}, + { -8795, 21, 14}, { -8754, 11, 13}, { -8716, 23, 14}, { -8679, 3, 11}, + { -8643, 25, 14}, { -8609, 13, 13}, { -8576, 27, 14}, { -8545, 7, 12}, + { -8514, 29, 14}, { -8485, 15, 13}, { -8456, 31, 14}, { -8429, 1, 9}, + { -8376, 17, 13}, { -8327, 9, 12}, { -8280, 19, 13}, { -8235, 5, 11}, + { -8193, 21, 13}, { -8152, 11, 12}, { -8114, 23, 13}, { -8077, 3, 10}, + { -8041, 25, 13}, { -8007, 13, 12}, { -7974, 27, 13}, { -7943, 7, 11}, + { -7912, 29, 13}, { -7883, 15, 12}, { -7854, 31, 13}, { -7827, 1, 8}, + { -7774, 17, 12}, { -7724, 9, 11}, { -7678, 19, 12}, { -7633, 5, 10}, + { -7591, 21, 12}, { -7550, 11, 11}, { -7512, 23, 12}, { -7475, 3, 9}, + { -7439, 25, 12}, { -7405, 13, 11}, { -7372, 27, 12}, { -7341, 7, 10}, + { -7310, 29, 12}, { -7281, 15, 11}, { -7252, 31, 12}, { -7225, 1, 7}, + { -7172, 17, 11}, { -7122, 9, 10}, { -7075, 19, 11}, { -7031, 5, 9}, + { -6989, 21, 11}, { -6948, 11, 10}, { -6910, 23, 11}, { -6873, 3, 8}, + { -6837, 25, 11}, { -6803, 13, 10}, { -6770, 27, 11}, { -6739, 7, 9}, + { -6708, 29, 11}, { -6679, 15, 10}, { -6650, 31, 11}, { -6623, 1, 6}, + { -6570, 17, 10}, { -6520, 9, 9}, { -6473, 19, 10}, { -6429, 5, 8}, + { -6386, 21, 10}, { -6346, 11, 9}, { -6307, 23, 10}, { -6270, 3, 7}, + { -6235, 25, 10}, { -6201, 13, 9}, { -6168, 27, 10}, { -6137, 7, 8}, + { -6106, 29, 10}, { -6077, 15, 9}, { -6048, 31, 10}, { -6021, 1, 5}, + { -5968, 17, 9}, { -5918, 9, 8}, { -5871, 19, 9}, { -5827, 5, 7}, + { -5784, 21, 9}, { -5744, 11, 8}, { -5705, 23, 9}, { -5668, 3, 6}, + { -5633, 25, 9}, { -5599, 13, 8}, { -5566, 27, 9}, { -5535, 7, 7}, + { -5504, 29, 9}, { -5475, 15, 8}, { -5446, 31, 9}, { -5419, 1, 4}, + { -5366, 17, 8}, { -5316, 9, 7}, { -5269, 19, 8}, { -5225, 5, 6}, + { -5182, 21, 8}, { -5142, 11, 7}, { -5103, 23, 8}, { -5066, 3, 5}, + { -5031, 25, 8}, { -4997, 13, 7}, { -4964, 27, 8}, { -4932, 7, 6}, + { -4902, 29, 8}, { -4873, 15, 7}, { -4844, 31, 8}, { -4816, 1, 3}, + { -4764, 17, 7}, { -4714, 9, 6}, { -4667, 19, 7}, { -4623, 5, 5}, + { -4580, 21, 7}, { -4540, 11, 6}, { -4501, 23, 7}, { -4464, 3, 4}, + { -4429, 25, 7}, { -4395, 13, 6}, { -4362, 27, 7}, { -4330, 7, 5}, + { -4300, 29, 7}, { -4270, 15, 6}, { -4242, 31, 7}, { -4214, 1, 2}, + { -4162, 17, 6}, { -4112, 9, 5}, { -4065, 19, 6}, { -4021, 5, 4}, + { -3978, 21, 6}, { -3938, 11, 5}, { -3899, 23, 6}, { -3862, 3, 3}, + { -3827, 25, 6}, { -3793, 13, 5}, { -3760, 27, 6}, { -3728, 7, 4}, + { -3698, 29, 6}, { -3668, 15, 5}, { -3640, 31, 6}, { -3612, 1, 1}, + { -3560, 17, 5}, { -3510, 9, 4}, { -3463, 19, 5}, { -3419, 5, 3}, + { -3376, 21, 5}, { -3336, 11, 4}, { -3297, 23, 5}, { -3260, 3, 2}, + { -3225, 25, 5}, { -3191, 13, 4}, { -3158, 27, 5}, { -3126, 7, 3}, + { -3096, 29, 5}, { -3066, 15, 4}, { -3038, 31, 5}, { -3010, 1, 0}, + { -2958, 17, 4}, { -2908, 9, 3}, { -2861, 19, 4}, { -2816, 5, 2}, + { -2774, 21, 4}, { -2734, 11, 3}, { -2695, 23, 4}, { -2658, 3, 1}, + { -2623, 25, 4}, { -2589, 13, 3}, { -2556, 27, 4}, { -2524, 7, 2}, + { -2494, 29, 4}, { -2464, 15, 3}, { -2436, 31, 4}, { -2408, 2, 0}, + { -2356, 17, 3}, { -2306, 9, 2}, { -2259, 19, 3}, { -2214, 5, 1}, + { -2172, 21, 3}, { -2132, 11, 2}, { -2093, 23, 3}, { -2056, 3, 0}, + { -2021, 25, 3}, { -1987, 13, 2}, { -1954, 27, 3}, { -1922, 7, 1}, + { -1892, 29, 3}, { -1862, 15, 2}, { -1834, 31, 3}, { -1806, 4, 0}, + { -1754, 17, 2}, { -1704, 9, 1}, { -1657, 19, 2}, { -1612, 5, 0}, + { -1570, 21, 2}, { -1530, 11, 1}, { -1491, 23, 2}, { -1454, 6, 0}, + { -1419, 25, 2}, { -1384, 13, 1}, { -1352, 27, 2}, { -1320, 7, 0}, + { -1290, 29, 2}, { -1260, 15, 1}, { -1232, 31, 2}, { -1204, 8, 0}, + { -1151, 17, 1}, { -1102, 9, 0}, { -1055, 19, 1}, { -1010, 10, 0}, + { -968, 21, 1}, { -928, 11, 0}, { -889, 23, 1}, { -852, 12, 0}, + { -816, 25, 1}, { -782, 13, 0}, { -750, 27, 1}, { -718, 14, 0}, + { -688, 29, 1}, { -658, 15, 0}, { -630, 31, 1}, { -602, 16, 0}, + { -549, 17, 0}, { -500, 18, 0}, { -453, 19, 0}, { -408, 20, 0}, + { -366, 21, 0}, { -325, 22, 0}, { -287, 23, 0}, { -250, 24, 0}, + { -214, 25, 0}, { -180, 26, 0}, { -148, 27, 0}, { -116, 28, 0}, + { -86, 29, 0}, { -56, 30, 0}, { -28, 31, 0}, { 0, 0, 0}, +}; + +static int pm860x_volatile(unsigned int reg) +{ + BUG_ON(reg >= REG_CACHE_SIZE); + + switch (reg) { + case PM860X_AUDIO_SUPPLIES_2: + return 1; + } + + return 0; +} + +static unsigned int pm860x_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (pm860x_volatile(reg)) + return cache[reg]; + + reg += REG_CACHE_BASE; + + return pm860x_reg_read(codec->control_data, reg); +} + +static int pm860x_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (!pm860x_volatile(reg)) + cache[reg] = (unsigned char)value; + + reg += REG_CACHE_BASE; + + return pm860x_reg_write(codec->control_data, reg, value); +} + +static int snd_soc_get_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int val[2], val2[2], i; + + val[0] = snd_soc_read(codec, reg) & 0x3f; + val[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT) >> 4) & 0xf; + val2[0] = snd_soc_read(codec, reg2) & 0x3f; + val2[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT)) & 0xf; + + for (i = 0; i < ARRAY_SIZE(st_table); i++) { + if ((st_table[i].m == val[0]) && (st_table[i].n == val[1])) + ucontrol->value.integer.value[0] = i; + if ((st_table[i].m == val2[0]) && (st_table[i].n == val2[1])) + ucontrol->value.integer.value[1] = i; + } + return 0; +} + +static int snd_soc_put_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int err; + unsigned int val, val2; + + val = ucontrol->value.integer.value[0]; + val2 = ucontrol->value.integer.value[1]; + + err = snd_soc_update_bits(codec, reg, 0x3f, st_table[val].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0xf0, + st_table[val].n << 4); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, 0x3f, st_table[val2].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0x0f, + st_table[val2].n); + return err; +} + +static int snd_soc_get_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max, val, val2; + unsigned int mask = (1 << fls(max)) - 1; + + val = snd_soc_read(codec, reg) >> shift; + val2 = snd_soc_read(codec, reg2) >> shift; + ucontrol->value.integer.value[0] = (max - val) & mask; + ucontrol->value.integer.value[1] = (max - val2) & mask; + + return 0; +} + +static int snd_soc_put_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max; + unsigned int mask = (1 << fls(max)) - 1; + int err; + unsigned int val, val2, val_mask; + + val_mask = mask << shift; + val = ((max - ucontrol->value.integer.value[0]) & mask); + val2 = ((max - ucontrol->value.integer.value[1]) & mask); + + val = val << shift; + val2 = val2 << shift; + + err = snd_soc_update_bits(codec, reg, val_mask, val); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, val_mask, val2); + return err; +} + +/* DAPM Widget Events */ +/* + * A lot registers are belong to RSYNC domain. It requires enabling RSYNC bit + * after updating these registers. Otherwise, these updated registers won't + * be effective. + */ +static int pm860x_rsync_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + /* + * automute will be set before DAC enabling. automute is used to + * anti-pop. + */ + if (pm860x->automute) { + mutex_lock(&pm860x->mutex); + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, 0); + pm860x->automute = 0; + mutex_unlock(&pm860x->mutex); + } + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned int dac = 0; + int data; + + if (!strcmp(w->name, "Left DAC")) + dac = DAC_LEFT; + if (!strcmp(w->name, "Right DAC")) + dac = DAC_RIGHT; + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (dac) { + /* automute is set before operating DAC. Anti-pop */ + mutex_lock(&pm860x->mutex); + pm860x->automute = 1; + dac |= MODULATOR; + /* mute */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + mutex_unlock(&pm860x->mutex); + /* update dac */ + snd_soc_update_bits(codec, PM860X_DAC_EN_2, + dac, dac); + } + break; + case SND_SOC_DAPM_PRE_PMD: + if (dac) { + mutex_lock(&pm860x->mutex); + pm860x->automute = 1; + /* mute */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + mutex_unlock(&pm860x->mutex); + /* update dac */ + data = snd_soc_read(codec, PM860X_DAC_EN_2); + data &= ~dac; + if (!(data & (DAC_LEFT | DAC_RIGHT))) + data &= ~MODULATOR; + snd_soc_write(codec, PM860X_DAC_EN_2, data); + } + break; + } + return 0; +} + +static const char *pm860x_opamp_texts[] = {"-50%", "-25%", "0%", "75%"}; + +static const char *pm860x_pa_texts[] = {"-33%", "0%", "33%", "66%"}; + +static const struct soc_enum pm860x_hs1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs1_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_hs2_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo1_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo2_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 5, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_ear_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_2, 0, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_ear_opamp_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 3, 4, pm860x_opamp_texts); + +static const struct snd_kcontrol_new pm860x_snd_controls[] = { + SOC_DOUBLE_R_TLV("ADC Capture Volume", PM860X_ADC_ANA_2, + PM860X_ADC_ANA_3, 6, 3, 0, adc_tlv), + SOC_DOUBLE_TLV("AUX Capture Volume", PM860X_ADC_ANA_3, 0, 3, 7, 0, + aux_tlv), + SOC_SINGLE_TLV("MIC1 Capture Volume", PM860X_ADC_ANA_2, 0, 7, 0, + mic_tlv), + SOC_SINGLE_TLV("MIC3 Capture Volume", PM860X_ADC_ANA_2, 3, 7, 0, + mic_tlv), + SOC_DOUBLE_R_EXT_TLV("Sidetone Volume", PM860X_SIDETONE_L_GAIN, + PM860X_SIDETONE_R_GAIN, 0, ARRAY_SIZE(st_table)-1, + 0, snd_soc_get_volsw_2r_st, + snd_soc_put_volsw_2r_st, st_tlv), + SOC_SINGLE_TLV("Speaker Playback Volume", PM860X_EAR_CTRL_1, + 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Line Playback Volume", PM860X_LO1_CTRL, + PM860X_LO2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Headset Playback Volume", PM860X_HS1_CTRL, + PM860X_HS2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Left Playback Volume", + PM860X_HIFIL_GAIN_LEFT, + PM860X_HIFIL_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Right Playback Volume", + PM860X_HIFIR_GAIN_LEFT, + PM860X_HIFIR_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Lofi Playback Volume", PM860X_LOFI_GAIN_LEFT, + PM860X_LOFI_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_ENUM("Headset1 Operational Amplifier Current", + pm860x_hs1_opamp_enum), + SOC_ENUM("Headset2 Operational Amplifier Current", + pm860x_hs2_opamp_enum), + SOC_ENUM("Headset1 Amplifier Current", pm860x_hs1_pa_enum), + SOC_ENUM("Headset2 Amplifier Current", pm860x_hs2_pa_enum), + SOC_ENUM("Lineout1 Operational Amplifier Current", + pm860x_lo1_opamp_enum), + SOC_ENUM("Lineout2 Operational Amplifier Current", + pm860x_lo2_opamp_enum), + SOC_ENUM("Lineout1 Amplifier Current", pm860x_lo1_pa_enum), + SOC_ENUM("Lineout2 Amplifier Current", pm860x_lo2_pa_enum), + SOC_ENUM("Speaker Operational Amplifier Current", + pm860x_spk_ear_opamp_enum), + SOC_ENUM("Speaker Amplifier Current", pm860x_spk_pa_enum), + SOC_ENUM("Earpiece Amplifier Current", pm860x_ear_pa_enum), +}; + +/* + * DAPM Controls + */ + +/* PCM Switch / PCM Interface */ +static const struct snd_kcontrol_new pcm_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ADC_EN_2, 0, 1, 0); + +/* AUX1 Switch */ +static const struct snd_kcontrol_new aux1_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 4, 1, 0); + +/* AUX2 Switch */ +static const struct snd_kcontrol_new aux2_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 5, 1, 0); + +/* Left Ex. PA Switch */ +static const struct snd_kcontrol_new lepa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 2, 1, 0); + +/* Right Ex. PA Switch */ +static const struct snd_kcontrol_new repa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 1, 1, 0); + +/* PCM Mux / Mux7 */ +static const char *aif1_text[] = { + "PCM L", "PCM R", +}; + +static const struct soc_enum aif1_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 6, 2, aif1_text); + +static const struct snd_kcontrol_new aif1_mux = + SOC_DAPM_ENUM("PCM Mux", aif1_enum); + +/* I2S Mux / Mux9 */ +static const char *i2s_din_text[] = { + "DIN", "DIN1", +}; + +static const struct soc_enum i2s_din_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 1, 2, i2s_din_text); + +static const struct snd_kcontrol_new i2s_din_mux = + SOC_DAPM_ENUM("I2S DIN Mux", i2s_din_enum); + +/* I2S Mic Mux / Mux8 */ +static const char *i2s_mic_text[] = { + "Ex PA", "ADC", +}; + +static const struct soc_enum i2s_mic_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 4, 2, i2s_mic_text); + +static const struct snd_kcontrol_new i2s_mic_mux = + SOC_DAPM_ENUM("I2S Mic Mux", i2s_mic_enum); + +/* ADCL Mux / Mux2 */ +static const char *adcl_text[] = { + "ADCR", "ADCL", +}; + +static const struct soc_enum adcl_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 4, 2, adcl_text); + +static const struct snd_kcontrol_new adcl_mux = + SOC_DAPM_ENUM("ADC Left Mux", adcl_enum); + +/* ADCR Mux / Mux3 */ +static const char *adcr_text[] = { + "ADCL", "ADCR", +}; + +static const struct soc_enum adcr_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 2, 2, adcr_text); + +static const struct snd_kcontrol_new adcr_mux = + SOC_DAPM_ENUM("ADC Right Mux", adcr_enum); + +/* ADCR EC Mux / Mux6 */ +static const char *adcr_ec_text[] = { + "ADCR", "EC", +}; + +static const struct soc_enum adcr_ec_enum = + SOC_ENUM_SINGLE(PM860X_ADC_EN_2, 3, 2, adcr_ec_text); + +static const struct snd_kcontrol_new adcr_ec_mux = + SOC_DAPM_ENUM("ADCR EC Mux", adcr_ec_enum); + +/* EC Mux / Mux4 */ +static const char *ec_text[] = { + "Left", "Right", "Left + Right", +}; + +static const struct soc_enum ec_enum = + SOC_ENUM_SINGLE(PM860X_EC_PATH, 1, 3, ec_text); + +static const struct snd_kcontrol_new ec_mux = + SOC_DAPM_ENUM("EC Mux", ec_enum); + +static const char *dac_text[] = { + "No input", "Right", "Left", "No input", +}; + +/* DAC Headset 1 Mux / Mux10 */ +static const struct soc_enum dac_hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs1_mux = + SOC_DAPM_ENUM("DAC HS1 Mux", dac_hs1_enum); + +/* DAC Headset 2 Mux / Mux11 */ +static const struct soc_enum dac_hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 2, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs2_mux = + SOC_DAPM_ENUM("DAC HS2 Mux", dac_hs2_enum); + +/* DAC Lineout 1 Mux / Mux12 */ +static const struct soc_enum dac_lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 4, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo1_mux = + SOC_DAPM_ENUM("DAC LO1 Mux", dac_lo1_enum); + +/* DAC Lineout 2 Mux / Mux13 */ +static const struct soc_enum dac_lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 6, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo2_mux = + SOC_DAPM_ENUM("DAC LO2 Mux", dac_lo2_enum); + +/* DAC Spearker Earphone Mux / Mux14 */ +static const struct soc_enum dac_spk_ear_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_2, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_spk_ear_mux = + SOC_DAPM_ENUM("DAC SP Mux", dac_spk_ear_enum); + +/* Headset 1 Mux / Mux15 */ +static const char *in_text[] = { + "Digital", "Analog", +}; + +static const struct soc_enum hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 0, 2, in_text); + +static const struct snd_kcontrol_new hs1_mux = + SOC_DAPM_ENUM("Headset1 Mux", hs1_enum); + +/* Headset 2 Mux / Mux16 */ +static const struct soc_enum hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 1, 2, in_text); + +static const struct snd_kcontrol_new hs2_mux = + SOC_DAPM_ENUM("Headset2 Mux", hs2_enum); + +/* Lineout 1 Mux / Mux17 */ +static const struct soc_enum lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 2, 2, in_text); + +static const struct snd_kcontrol_new lo1_mux = + SOC_DAPM_ENUM("Lineout1 Mux", lo1_enum); + +/* Lineout 2 Mux / Mux18 */ +static const struct soc_enum lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 3, 2, in_text); + +static const struct snd_kcontrol_new lo2_mux = + SOC_DAPM_ENUM("Lineout2 Mux", lo2_enum); + +/* Speaker Earpiece Demux */ +static const char *spk_text[] = { + "Earpiece", "Speaker", +}; + +static const struct soc_enum spk_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 6, 2, spk_text); + +static const struct snd_kcontrol_new spk_demux = + SOC_DAPM_ENUM("Speaker Earpiece Demux", spk_enum); + +/* MIC Mux / Mux1 */ +static const char *mic_text[] = { + "Mic 1", "Mic 2", +}; + +static const struct soc_enum mic_enum = + SOC_ENUM_SINGLE(PM860X_ADC_ANA_4, 4, 2, mic_text); + +static const struct snd_kcontrol_new mic_mux = + SOC_DAPM_ENUM("MIC Mux", mic_enum); + +static const struct snd_soc_dapm_widget pm860x_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("PCM SDI", "PCM Playback", 0, + PM860X_ADC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("PCM SDO", "PCM Capture", 0, + PM860X_PCM_IFACE_3, 1, 1), + + + SND_SOC_DAPM_AIF_IN("I2S DIN", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_IN("I2S DIN1", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("I2S DOUT", "I2S Capture", 0, + PM860X_I2S_IFACE_3, 5, 1), + SND_SOC_DAPM_MUX("I2S Mic Mux", SND_SOC_NOPM, 0, 0, &i2s_mic_mux), + SND_SOC_DAPM_MUX("ADC Left Mux", SND_SOC_NOPM, 0, 0, &adcl_mux), + SND_SOC_DAPM_MUX("ADC Right Mux", SND_SOC_NOPM, 0, 0, &adcr_mux), + SND_SOC_DAPM_MUX("EC Mux", SND_SOC_NOPM, 0, 0, &ec_mux), + SND_SOC_DAPM_MUX("ADCR EC Mux", SND_SOC_NOPM, 0, 0, &adcr_ec_mux), + SND_SOC_DAPM_SWITCH("Left EPA", SND_SOC_NOPM, 0, 0, + &lepa_switch_controls), + SND_SOC_DAPM_SWITCH("Right EPA", SND_SOC_NOPM, 0, 0, + &repa_switch_controls), + + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "Left ADC MOD", PM860X_ADC_EN_1, + 0, 1, 1, 0), + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "Right ADC MOD", PM860X_ADC_EN_1, + 1, 1, 1, 0), + SND_SOC_DAPM_ADC("Left ADC", NULL, PM860X_ADC_EN_2, 5, 0), + SND_SOC_DAPM_ADC("Right ADC", NULL, PM860X_ADC_EN_2, 4, 0), + + SND_SOC_DAPM_SWITCH("AUX1 Switch", SND_SOC_NOPM, 0, 0, + &aux1_switch_controls), + SND_SOC_DAPM_SWITCH("AUX2 Switch", SND_SOC_NOPM, 0, 0, + &aux2_switch_controls), + + SND_SOC_DAPM_MUX("MIC Mux", SND_SOC_NOPM, 0, 0, &mic_mux), + SND_SOC_DAPM_MICBIAS("Mic1 Bias", PM860X_ADC_ANA_1, 2, 0), + SND_SOC_DAPM_MICBIAS("Mic3 Bias", PM860X_ADC_ANA_1, 7, 0), + SND_SOC_DAPM_PGA("MIC1 Volume", PM860X_ADC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("MIC3 Volume", PM860X_ADC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX1 Volume", PM860X_ADC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX2 Volume", PM860X_ADC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("Sidetone PGA", PM860X_ADC_EN_2, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lofi PGA", PM860X_ADC_EN_2, 2, 0, NULL, 0), + + SND_SOC_DAPM_INPUT("AUX1"), + SND_SOC_DAPM_INPUT("AUX2"), + SND_SOC_DAPM_INPUT("MIC1P"), + SND_SOC_DAPM_INPUT("MIC1N"), + SND_SOC_DAPM_INPUT("MIC2P"), + SND_SOC_DAPM_INPUT("MIC2N"), + SND_SOC_DAPM_INPUT("MIC3P"), + SND_SOC_DAPM_INPUT("MIC3N"), + + SND_SOC_DAPM_DAC_E("Left DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_DAC_E("Right DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_MUX("I2S DIN Mux", SND_SOC_NOPM, 0, 0, &i2s_din_mux), + SND_SOC_DAPM_MUX("DAC HS1 Mux", SND_SOC_NOPM, 0, 0, &dac_hs1_mux), + SND_SOC_DAPM_MUX("DAC HS2 Mux", SND_SOC_NOPM, 0, 0, &dac_hs2_mux), + SND_SOC_DAPM_MUX("DAC LO1 Mux", SND_SOC_NOPM, 0, 0, &dac_lo1_mux), + SND_SOC_DAPM_MUX("DAC LO2 Mux", SND_SOC_NOPM, 0, 0, &dac_lo2_mux), + SND_SOC_DAPM_MUX("DAC SP Mux", SND_SOC_NOPM, 0, 0, &dac_spk_ear_mux), + SND_SOC_DAPM_MUX("Headset1 Mux", SND_SOC_NOPM, 0, 0, &hs1_mux), + SND_SOC_DAPM_MUX("Headset2 Mux", SND_SOC_NOPM, 0, 0, &hs2_mux), + SND_SOC_DAPM_MUX("Lineout1 Mux", SND_SOC_NOPM, 0, 0, &lo1_mux), + SND_SOC_DAPM_MUX("Lineout2 Mux", SND_SOC_NOPM, 0, 0, &lo2_mux), + SND_SOC_DAPM_MUX("Speaker Earpiece Demux", SND_SOC_NOPM, 0, 0, + &spk_demux), + + + SND_SOC_DAPM_PGA("Headset1 PGA", PM860X_DAC_EN_1, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Headset2 PGA", PM860X_DAC_EN_1, 1, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("HS1"), + SND_SOC_DAPM_OUTPUT("HS2"), + SND_SOC_DAPM_PGA("Lineout1 PGA", PM860X_DAC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lineout2 PGA", PM860X_DAC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LINEOUT1"), + SND_SOC_DAPM_OUTPUT("LINEOUT2"), + SND_SOC_DAPM_PGA("Earpiece PGA", PM860X_DAC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("EARP"), + SND_SOC_DAPM_OUTPUT("EARN"), + SND_SOC_DAPM_PGA("Speaker PGA", PM860X_DAC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LSP"), + SND_SOC_DAPM_OUTPUT("LSN"), + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "VCODEC", PM860X_AUDIO_SUPPLIES_2, + 0, SUPPLY_MASK, SUPPLY_MASK, 0), + + PM860X_DAPM_OUTPUT("RSYNC", pm860x_rsync_event), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* supply */ + {"Left DAC", NULL, "VCODEC"}, + {"Right DAC", NULL, "VCODEC"}, + {"Left ADC", NULL, "VCODEC"}, + {"Right ADC", NULL, "VCODEC"}, + {"Left ADC", NULL, "Left ADC MOD"}, + {"Right ADC", NULL, "Right ADC MOD"}, + + /* PCM/AIF1 Inputs */ + {"PCM SDO", NULL, "ADC Left Mux"}, + {"PCM SDO", NULL, "ADCR EC Mux"}, + + /* PCM/AFI2 Outputs */ + {"Lofi PGA", NULL, "PCM SDI"}, + {"Lofi PGA", NULL, "Sidetone PGA"}, + {"Left DAC", NULL, "Lofi PGA"}, + {"Right DAC", NULL, "Lofi PGA"}, + + /* I2S/AIF2 Inputs */ + {"MIC Mux", "Mic 1", "MIC1P"}, + {"MIC Mux", "Mic 1", "MIC1N"}, + {"MIC Mux", "Mic 2", "MIC2P"}, + {"MIC Mux", "Mic 2", "MIC2N"}, + {"MIC1 Volume", NULL, "MIC Mux"}, + {"MIC3 Volume", NULL, "MIC3P"}, + {"MIC3 Volume", NULL, "MIC3N"}, + {"Left ADC", NULL, "MIC1 Volume"}, + {"Right ADC", NULL, "MIC3 Volume"}, + {"ADC Left Mux", "ADCR", "Right ADC"}, + {"ADC Left Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCR", "Right ADC"}, + {"Left EPA", "Switch", "Left DAC"}, + {"Right EPA", "Switch", "Right DAC"}, + {"EC Mux", "Left", "Left DAC"}, + {"EC Mux", "Right", "Right DAC"}, + {"EC Mux", "Left + Right", "Left DAC"}, + {"EC Mux", "Left + Right", "Right DAC"}, + {"ADCR EC Mux", "ADCR", "ADC Right Mux"}, + {"ADCR EC Mux", "EC", "EC Mux"}, + {"I2S Mic Mux", "Ex PA", "Left EPA"}, + {"I2S Mic Mux", "Ex PA", "Right EPA"}, + {"I2S Mic Mux", "ADC", "ADC Left Mux"}, + {"I2S Mic Mux", "ADC", "ADCR EC Mux"}, + {"I2S DOUT", NULL, "I2S Mic Mux"}, + + /* I2S/AIF2 Outputs */ + {"I2S DIN Mux", "DIN", "I2S DIN"}, + {"I2S DIN Mux", "DIN1", "I2S DIN1"}, + {"Left DAC", NULL, "I2S DIN Mux"}, + {"Right DAC", NULL, "I2S DIN Mux"}, + {"DAC HS1 Mux", "Left", "Left DAC"}, + {"DAC HS1 Mux", "Right", "Right DAC"}, + {"DAC HS2 Mux", "Left", "Left DAC"}, + {"DAC HS2 Mux", "Right", "Right DAC"}, + {"DAC LO1 Mux", "Left", "Left DAC"}, + {"DAC LO1 Mux", "Right", "Right DAC"}, + {"DAC LO2 Mux", "Left", "Left DAC"}, + {"DAC LO2 Mux", "Right", "Right DAC"}, + {"Headset1 Mux", "Digital", "DAC HS1 Mux"}, + {"Headset2 Mux", "Digital", "DAC HS2 Mux"}, + {"Lineout1 Mux", "Digital", "DAC LO1 Mux"}, + {"Lineout2 Mux", "Digital", "DAC LO2 Mux"}, + {"Headset1 PGA", NULL, "Headset1 Mux"}, + {"Headset2 PGA", NULL, "Headset2 Mux"}, + {"Lineout1 PGA", NULL, "Lineout1 Mux"}, + {"Lineout2 PGA", NULL, "Lineout2 Mux"}, + {"DAC SP Mux", "Left", "Left DAC"}, + {"DAC SP Mux", "Right", "Right DAC"}, + {"Speaker Earpiece Demux", "Speaker", "DAC SP Mux"}, + {"Speaker PGA", NULL, "Speaker Earpiece Demux"}, + {"Earpiece PGA", NULL, "Speaker Earpiece Demux"}, + + {"HS1", NULL, "Headset1 PGA"}, + {"HS2", NULL, "Headset2 PGA"}, + {"LINEOUT1", NULL, "Lineout1 PGA"}, + {"LINEOUT2", NULL, "Lineout2 PGA"}, + {"LSP", NULL, "Speaker PGA"}, + {"LSN", NULL, "Speaker PGA"}, + {"EARP", NULL, "Earpiece PGA"}, + {"EARN", NULL, "Earpiece PGA"}, + + {"RSYNC", NULL, "Headset1 PGA"}, + {"RSYNC", NULL, "Headset2 PGA"}, + {"RSYNC", NULL, "Lineout1 PGA"}, + {"RSYNC", NULL, "Lineout2 PGA"}, + {"RSYNC", NULL, "Speaker PGA"}, + {"RSYNC", NULL, "Earpiece PGA"}, +}; + +static int pm860x_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int data = 0; + + if (mute) + data = DAC_MUTE; + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, data); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf = 0, mask = 0; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf &= ~PCM_INF2_18WL; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf |= PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + mask |= PCM_INF2_18WL; + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 16000: + inf = 3; + break; + case 32000: + inf = 6; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_PCM_RATE, 0x0f, inf); + + return 0; +} + +static int pm860x_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int ret = -EINVAL; + + mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + if (pm860x->dir == PM860X_CLK_DIR_OUT) { + inf |= PCM_INF2_MASTER; + ret = 0; + } + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) { + inf &= ~PCM_INF2_MASTER; + ret = 0; + } + break; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + inf |= PCM_EXACT_I2S; + ret = 0; + break; + } + mask |= PCM_MODE_MASK; + if (ret) + return ret; + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + return 0; +} + +static int pm860x_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + if (dir == PM860X_CLK_DIR_OUT) + pm860x->dir = PM860X_CLK_DIR_OUT; + else { + pm860x->dir = PM860X_CLK_DIR_IN; + return -EINVAL; + } + + return 0; +} + +static int pm860x_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf = 0; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf = PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, PCM_INF2_18WL, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 11025: + inf = 1; + break; + case 16000: + inf = 3; + break; + case 22050: + inf = 4; + break; + case 32000: + inf = 6; + break; + case 44100: + inf = 7; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_4, 0xf, inf); + + return 0; +} + +static int pm860x_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int ret = -EINVAL; + + mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + if (pm860x->dir == PM860X_CLK_DIR_OUT) { + inf |= PCM_INF2_MASTER; + ret = 0; + } + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) { + inf &= ~PCM_INF2_MASTER; + ret = 0; + } + break; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + inf |= PCM_EXACT_I2S; + ret = 0; + break; + } + mask |= PCM_MODE_MASK; + if (ret) + return ret; + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, mask, inf); + return 0; +} + +static int pm860x_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int data; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Enable Audio PLL & Audio section */ + data = AUDIO_PLL | AUDIO_SECTION_RESET + | AUDIO_SECTION_ON; + pm860x_reg_write(codec->control_data, REG_MISC2, data); + } + break; + + case SND_SOC_BIAS_OFF: + data = AUDIO_PLL | AUDIO_SECTION_RESET | AUDIO_SECTION_ON; + pm860x_set_bits(codec->control_data, REG_MISC2, data, 0); + break; + } + codec->bias_level = level; + return 0; +} + +static struct snd_soc_dai_ops pm860x_pcm_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_pcm_hw_params, + .set_fmt = pm860x_pcm_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops pm860x_i2s_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_i2s_hw_params, + .set_fmt = pm860x_i2s_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +#define PM860X_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000) + +static struct snd_soc_dai_driver pm860x_dai[] = { + { + /* DAI PCM */ + .name = "88pm860x-pcm", + .id = 1, + .playback = { + .stream_name = "PCM Playback", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "PCM Capture", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_pcm_dai_ops, + }, { + /* DAI I2S */ + .name = "88pm860x-i2s", + .id = 2, + .playback = { + .stream_name = "I2S Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "I2S Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_i2s_dai_ops, + }, +}; + +static irqreturn_t pm860x_codec_handler(int irq, void *data) +{ + struct pm860x_priv *pm860x = data; + int status, shrt, report = 0; + int mask; + + status = pm860x_reg_read(pm860x->i2c, REG_STATUS_1); + shrt = pm860x_reg_read(pm860x->i2c, REG_SHORTS); + mask = SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 + | SND_JACK_BTN_2; + + if ((pm860x->det.hs_det & SND_JACK_HEADPHONE) + && (status & HEADSET_STATUS)) + report |= SND_JACK_HEADPHONE; + + if ((pm860x->det.hs_det & SND_JACK_MICROPHONE) + && (status & MIC_STATUS)) + report |= SND_JACK_MICROPHONE; + + if ((pm860x->det.hs_shrt & SND_JACK_BTN_0) + && (shrt & (SHORT_HS1 | SHORT_HS2))) + report |= SND_JACK_BTN_0; + + if ((pm860x->det.hook_det & SND_JACK_BTN_1) + && (status & HOOK_STATUS)) + report |= SND_JACK_BTN_1; + + if ((pm860x->det.lo_shrt & SND_JACK_BTN_2) + && (shrt & (SHORT_LO1 | SHORT_LO2))) + report |= SND_JACK_BTN_2; + + snd_soc_jack_report(pm860x->det.jack, report, mask); + dev_dbg(pm860x->codec->dev, "report:0x%x, mask:%x\n", report, mask); + return IRQ_HANDLED; +} + +int pm860x_hs_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack, + int det, int shrt) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int data; + + pm860x->det.hs_det = 0; + pm860x->det.hs_shrt = 0; + pm860x->det.jack = jack; + + if (det & SND_JACK_MICROPHONE) { + pm860x->det.hs_det |= SND_JACK_MICROPHONE; + pm860x_set_bits(codec->control_data, REG_MIC_DET, + MICDET_MASK, MICDET_MASK); + } + if (det & SND_JACK_HEADPHONE) { + pm860x->det.hs_det |= SND_JACK_HEADPHONE; + pm860x_set_bits(codec->control_data, REG_HS_DET, + EN_HS_DET, EN_HS_DET); + } + /* headset short */ + if (shrt & SND_JACK_BTN_0) { + pm860x->det.hs_shrt |= SND_JACK_BTN_0; + data = CLR_SHORT_HS2 | CLR_SHORT_HS1; + pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + } + + /* sync status */ + pm860x_codec_handler(0, pm860x); + return 0; +} +EXPORT_SYMBOL_GPL(pm860x_hs_jack_detect); + +int pm860x_hook_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack, + int det, int shrt) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int data; + + pm860x->det.hook_det = 0; + pm860x->det.lo_shrt = 0; + pm860x->det.jack = jack; + + /* enable hook detect */ + if (det & SND_JACK_BTN_1) + pm860x->det.hook_det = SND_JACK_BTN_1; + /* Lineout short detect */ + if (shrt & SND_JACK_BTN_2) { + pm860x->det.lo_shrt = SND_JACK_BTN_2; + data = CLR_SHORT_LO2 | CLR_SHORT_LO1; + pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + } + + /* sync status */ + pm860x_codec_handler(0, pm860x); + return 0; +} +EXPORT_SYMBOL_GPL(pm860x_hook_detect); + +static int pm860x_probe(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i, ret; + + pm860x->codec = codec; + + codec->control_data = pm860x->i2c; + + for (i = 0; i < 4; i++) { + ret = request_threaded_irq(pm860x->irq[i], NULL, + pm860x_codec_handler, IRQF_ONESHOT, + pm860x->name[i], pm860x); + if (ret < 0) { + dev_err(codec->dev, "Failed to request IRQ!\n"); + goto out_irq; + } + } + + pm860x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + ret = pm860x_bulk_read(codec->control_data, REG_CACHE_BASE, + REG_CACHE_SIZE, codec->reg_cache); + if (ret < 0) { + dev_err(codec->dev, "Failed to fill register cache: %d\n", + ret); + goto out_codec; + } + + snd_soc_add_controls(codec, pm860x_snd_controls, + ARRAY_SIZE(pm860x_snd_controls)); + snd_soc_dapm_new_controls(codec, pm860x_dapm_widgets, + ARRAY_SIZE(pm860x_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + return 0; + +out_codec: + i = 3; +out_irq: + for (; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + return -EINVAL; +} + +static int pm860x_remove(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i; + + for (i = 3; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + pm860x_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_pm860x = { + .probe = pm860x_probe, + .remove = pm860x_remove, + .read = pm860x_read_reg_cache, + .write = pm860x_write_reg_cache, + .reg_cache_size = REG_CACHE_SIZE, + .reg_word_size = sizeof(u8), + .set_bias_level = pm860x_set_bias_level, +}; + +static int __devinit pm860x_codec_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_priv *pm860x; + struct resource *res; + int i, ret; + + pm860x = kzalloc(sizeof(struct pm860x_priv), GFP_KERNEL); + if (pm860x == NULL) + return -ENOMEM; + + pm860x->chip = chip; + pm860x->i2c = (chip->id == CHIP_PM8607) ? chip->client + : chip->companion; + platform_set_drvdata(pdev, pm860x); + mutex_init(&pm860x->mutex); + + for (i = 0; i < 4; i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + if (!res) { + dev_err(&pdev->dev, "Failed to get IRQ resources\n"); + goto out; + } + pm860x->irq[i] = res->start + chip->irq_base; + strncpy(pm860x->name[i], res->name, MAX_NAME_LEN); + } + + ret = snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pm860x, + pm860x_dai, ARRAY_SIZE(pm860x_dai)); + if (ret) { + dev_err(&pdev->dev, "Failed to register codec\n"); + goto out; + } + return ret; + +out: + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return -EINVAL; +} + +static int __devexit pm860x_codec_remove(struct platform_device *pdev) +{ + struct pm860x_priv *pm860x = platform_get_drvdata(pdev); + + snd_soc_unregister_codec(&pdev->dev); + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return 0; +} + +static struct platform_driver pm860x_codec_driver = { + .driver = { + .name = "88pm860x-codec", + .owner = THIS_MODULE, + }, + .probe = pm860x_codec_probe, + .remove = __devexit_p(pm860x_codec_remove), +}; + +static __init int pm860x_init(void) +{ + return platform_driver_register(&pm860x_codec_driver); +} +module_init(pm860x_init); + +static __exit void pm860x_exit(void) +{ + platform_driver_unregister(&pm860x_codec_driver); +} +module_exit(pm860x_exit); + +MODULE_DESCRIPTION("ASoC 88PM860x driver"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-codec"); + diff --git a/sound/soc/codecs/88pm860x-codec.h b/sound/soc/codecs/88pm860x-codec.h new file mode 100644 index 0000000..247c1a4 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.h @@ -0,0 +1,97 @@ +/* + * 88pm860x-codec.h -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __88PM860X_H +#define __88PM860X_H + +/* The offset of these registers are 0xb0 */ +#define PM860X_PCM_IFACE_1 0x00 +#define PM860X_PCM_IFACE_2 0x01 +#define PM860X_PCM_IFACE_3 0x02 +#define PM860X_PCM_RATE 0x03 +#define PM860X_EC_PATH 0x04 +#define PM860X_SIDETONE_L_GAIN 0x05 +#define PM860X_SIDETONE_R_GAIN 0x06 +#define PM860X_SIDETONE_SHIFT 0x07 +#define PM860X_ADC_OFFSET_1 0x08 +#define PM860X_ADC_OFFSET_2 0x09 +#define PM860X_DMIC_DELAY 0x0a + +#define PM860X_I2S_IFACE_1 0x0b +#define PM860X_I2S_IFACE_2 0x0c +#define PM860X_I2S_IFACE_3 0x0d +#define PM860X_I2S_IFACE_4 0x0e +#define PM860X_EQUALIZER_N0_1 0x0f +#define PM860X_EQUALIZER_N0_2 0x10 +#define PM860X_EQUALIZER_N1_1 0x11 +#define PM860X_EQUALIZER_N1_2 0x12 +#define PM860X_EQUALIZER_D1_1 0x13 +#define PM860X_EQUALIZER_D1_2 0x14 +#define PM860X_LOFI_GAIN_LEFT 0x15 +#define PM860X_LOFI_GAIN_RIGHT 0x16 +#define PM860X_HIFIL_GAIN_LEFT 0x17 +#define PM860X_HIFIL_GAIN_RIGHT 0x18 +#define PM860X_HIFIR_GAIN_LEFT 0x19 +#define PM860X_HIFIR_GAIN_RIGHT 0x1a +#define PM860X_DAC_OFFSET 0x1b +#define PM860X_OFFSET_LEFT_1 0x1c +#define PM860X_OFFSET_LEFT_2 0x1d +#define PM860X_OFFSET_RIGHT_1 0x1e +#define PM860X_OFFSET_RIGHT_2 0x1f +#define PM860X_ADC_ANA_1 0x20 +#define PM860X_ADC_ANA_2 0x21 +#define PM860X_ADC_ANA_3 0x22 +#define PM860X_ADC_ANA_4 0x23 +#define PM860X_ANA_TO_ANA 0x24 +#define PM860X_HS1_CTRL 0x25 +#define PM860X_HS2_CTRL 0x26 +#define PM860X_LO1_CTRL 0x27 +#define PM860X_LO2_CTRL 0x28 +#define PM860X_EAR_CTRL_1 0x29 +#define PM860X_EAR_CTRL_2 0x2a +#define PM860X_AUDIO_SUPPLIES_1 0x2b +#define PM860X_AUDIO_SUPPLIES_2 0x2c +#define PM860X_ADC_EN_1 0x2d +#define PM860X_ADC_EN_2 0x2e +#define PM860X_DAC_EN_1 0x2f +#define PM860X_DAC_EN_2 0x31 +#define PM860X_AUDIO_CAL_1 0x32 +#define PM860X_AUDIO_CAL_2 0x33 +#define PM860X_AUDIO_CAL_3 0x34 +#define PM860X_AUDIO_CAL_4 0x35 +#define PM860X_AUDIO_CAL_5 0x36 +#define PM860X_ANA_INPUT_SEL_1 0x37 +#define PM860X_ANA_INPUT_SEL_2 0x38 + +#define PM860X_PCM_IFACE_4 0x39 +#define PM860X_I2S_IFACE_5 0x3a + +#define PM860X_SHORTS 0x3b +#define PM860X_PLL_ADJ_1 0x3c +#define PM860X_PLL_ADJ_2 0x3d + +/* bits definition */ +#define PM860X_CLK_DIR_IN 0 +#define PM860X_CLK_DIR_OUT 1 + +#define PM860X_DET_HEADSET (1 << 0) +#define PM860X_DET_MIC (1 << 1) +#define PM860X_DET_HOOK (1 << 2) +#define PM860X_SHORT_HEADSET (1 << 3) +#define PM860X_SHORT_LINEOUT (1 << 4) +#define PM860X_DET_MASK 0x1F + +extern int pm860x_hs_jack_detect(struct snd_soc_codec *, struct snd_soc_jack *, + int, int); +extern int pm860x_hook_detect(struct snd_soc_codec *, struct snd_soc_jack *, + int, int); + +#endif /* __88PM860X_H */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index bfdd92b..a3cfc18 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -10,6 +10,7 @@ config SND_SOC_I2C_AND_SPI config SND_SOC_ALL_CODECS tristate "Build all ASoC CODEC drivers" + select SND_SOC_88PM860X if MFD_88PM860X select SND_SOC_L3 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS select SND_SOC_AD1836 if SPI_MASTER @@ -85,6 +86,9 @@ config SND_SOC_ALL_CODECS If unsure select "N". +config SND_SOC_88PM860X + tristate + config SND_SOC_WM_HUBS tristate default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 9c3c39f..b9c4358 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,3 +1,4 @@ +snd-soc-88pm860x-objs := 88pm860x-codec.o snd-soc-ac97-objs := ac97.o snd-soc-ad1836-objs := ad1836.o snd-soc-ad193x-objs := ad193x.o @@ -67,6 +68,7 @@ snd-soc-tpa6130a2-objs := tpa6130a2.o snd-soc-wm2000-objs := wm2000.o snd-soc-wm9090-objs := wm9090.o +obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o -- 1.5.6.5

1 0

[PATCH 1/3] ASoC: add 88pm860x codec driver
by Haojian Zhuang 12 Aug '10

12 Aug '10

Add 88PM860x codec driver. 88PM860x codec supports two interfaces. And it also supports headset/mic/hook/short detection. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/codecs/88pm860x-codec.c | 1493 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/88pm860x-codec.h | 97 +++ sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + 4 files changed, 1596 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/88pm860x-codec.c create mode 100644 sound/soc/codecs/88pm860x-codec.h diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c new file mode 100644 index 0000000..1cc7565 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.c @@ -0,0 +1,1493 @@ +/* + * 88pm860x-codec.c -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Author: Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/mfd/88pm860x.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> +#include <sound/jack.h> + +#include "88pm860x-codec.h" + +#define MAX_NAME_LEN 20 +#define REG_CACHE_SIZE 0x40 +#define REG_CACHE_BASE 0xb0 + +/* Status Register 1 (0x01) */ +#define REG_STATUS_1 0x01 +#define MIC_STATUS (1 << 7) +#define HOOK_STATUS (1 << 6) +#define HEADSET_STATUS (1 << 5) + +/* Mic Detection Register (0x37) */ +#define REG_MIC_DET 0x37 +#define CONTINUOUS_POLLING (3 << 1) +#define EN_MIC_DET (1 << 0) +#define MICDET_MASK 0x07 + +/* Headset Detection Register (0x38) */ +#define REG_HS_DET 0x38 +#define EN_HS_DET (1 << 0) + +/* Misc2 Register (0x42) */ +#define REG_MISC2 0x42 +#define AUDIO_PLL (1 << 5) +#define AUDIO_SECTION_RESET (1 << 4) +#define AUDIO_SECTION_ON (1 << 3) + +/* PCM Interface Register 2 (0xb1) */ +#define PCM_INF2_BCLK (1 << 6) /* Bit clock polarity */ +#define PCM_INF2_FS (1 << 5) /* Frame Sync polarity */ +#define PCM_INF2_MASTER (1 << 4) /* Master / Slave */ +#define PCM_INF2_18WL (1 << 3) /* 18 / 16 bits */ +#define PCM_GENERAL_I2S 0 +#define PCM_EXACT_I2S 1 +#define PCM_LEFT_I2S 2 +#define PCM_RIGHT_I2S 3 +#define PCM_SHORT_FS 4 +#define PCM_LONG_FS 5 +#define PCM_MODE_MASK 7 + +/* I2S Interface Register 4 (0xbe) */ +#define I2S_EQU_BYP (1 << 6) + +/* DAC Offset Register (0xcb) */ +#define DAC_MUTE (1 << 7) + +/* ADC Analog Register 1 (0xd0) */ +#define REG_ADC_ANA_1 0xd0 +#define MIC1BIAS_MASK 0x60 + +/* Earpiece/Speaker Control Register 2 (0xda) */ +#define REG_EAR2 0xda +#define RSYNC_CHANGE (1 << 2) + +/* Audio Supplies Register 2 (0xdc) */ +#define REG_SUPPLIES2 0xdc +#define LDO15_READY (1 << 4) +#define LDO15_EN (1 << 3) +#define CPUMP_READY (1 << 2) +#define CPUMP_EN (1 << 1) +#define AUDIO_EN (1 << 0) +#define SUPPLY_MASK (LDO15_EN | CPUMP_EN | AUDIO_EN) + +/* Audio Enable Register 1 (0xdd) */ +#define ADC_MOD_RIGHT (1 << 1) +#define ADC_MOD_LEFT (1 << 0) + +/* Audio Enable Register 2 (0xde) */ +#define ADC_LEFT (1 << 5) +#define ADC_RIGHT (1 << 4) + +/* DAC Enable Register 2 (0xe1) */ +#define DAC_LEFT (1 << 5) +#define DAC_RIGHT (1 << 4) +#define MODULATOR (1 << 3) + +/* Shorts Register (0xeb) */ +#define REG_SHORTS 0xeb +#define CLR_SHORT_LO2 (1 << 7) +#define SHORT_LO2 (1 << 6) +#define CLR_SHORT_LO1 (1 << 5) +#define SHORT_LO1 (1 << 4) +#define CLR_SHORT_HS2 (1 << 3) +#define SHORT_HS2 (1 << 2) +#define CLR_SHORT_HS1 (1 << 1) +#define SHORT_HS1 (1 << 0) + +#define PM860X_DAPM_OUTPUT(wname, wevent) \ +{ .id = snd_soc_dapm_output, .name = wname, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD, } + +struct pm860x_det { + struct snd_soc_jack *jack; + int hs_det; + int hs_shrt; + int hook_det; + int lo_shrt; +}; + +struct pm860x_priv { + unsigned int sysclk; + unsigned int pcmclk; + unsigned int dir; + unsigned int automute; + unsigned int filter; + struct snd_soc_codec *codec; + struct i2c_client *i2c; + struct pm860x_chip *chip; + struct mutex mutex; + struct pm860x_det det; + + int irq[4]; + unsigned char name[4][MAX_NAME_LEN]; + unsigned char reg_cache[REG_CACHE_SIZE]; +}; + +/* -9450dB to 0dB in 150dB steps ( mute instead of -9450dB) */ +static const DECLARE_TLV_DB_SCALE(dpga_tlv, -9450, 150, 1); + +/* -9dB to 0db in 3dB steps */ +static const DECLARE_TLV_DB_SCALE(adc_tlv, -900, 300, 0); + +/* {-23, -17, -13.5, -11, -9, -6, -3, 0}dB */ +static const unsigned int mic_tlv[] = { + TLV_DB_RANGE_HEAD(5), + 0, 0, TLV_DB_SCALE_ITEM(-2300, 0, 0), + 1, 1, TLV_DB_SCALE_ITEM(-1700, 0, 0), + 2, 2, TLV_DB_SCALE_ITEM(-1350, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(-1100, 0, 0), + 4, 7, TLV_DB_SCALE_ITEM(-900, 300, 0), +}; + +/* {0, 0, 0, -6, 0, 6, 12, 18}dB */ +static const unsigned int aux_tlv[] = { + TLV_DB_RANGE_HEAD(2), + 0, 2, TLV_DB_SCALE_ITEM(0, 0, 0), + 3, 7, TLV_DB_SCALE_ITEM(-600, 600, 0), +}; + +/* {-16, -13, -10, -7, -5.2, -3,3, -2.2, 0}dB, mute instead of -16dB */ +static const unsigned int out_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 3, TLV_DB_SCALE_ITEM(-1600, 300, 1), + 4, 4, TLV_DB_SCALE_ITEM(-520, 0, 0), + 5, 5, TLV_DB_SCALE_ITEM(-330, 0, 0), + 6, 7, TLV_DB_SCALE_ITEM(-220, 220, 0), +}; + +static const unsigned int st_tlv[] = { + TLV_DB_RANGE_HEAD(8), + 0, 1, TLV_DB_SCALE_ITEM(-12041, 602, 0), + 2, 3, TLV_DB_SCALE_ITEM(-11087, 250, 0), + 4, 5, TLV_DB_SCALE_ITEM(-10643, 158, 0), + 6, 7, TLV_DB_SCALE_ITEM(-10351, 116, 0), + 8, 9, TLV_DB_SCALE_ITEM(-10133, 92, 0), + 10, 13, TLV_DB_SCALE_ITEM(-9958, 70, 0), + 14, 17, TLV_DB_SCALE_ITEM(-9689, 53, 0), + 18, 271, TLV_DB_SCALE_ITEM(-9484, 37, 0), +}; + +/* Sidetone Gain = M * 2^(-5-N) */ +struct st_gain { + unsigned int db; + unsigned int m; + unsigned int n; +}; + +static struct st_gain st_table[] = { + {-12041, 1, 15}, {-11439, 1, 14}, {-11087, 3, 15}, {-10837, 1, 13}, + {-10643, 5, 15}, {-10485, 3, 14}, {-10351, 7, 15}, {-10235, 1, 12}, + {-10133, 9, 15}, {-10041, 5, 14}, { -9958, 11, 15}, { -9883, 3, 13}, + { -9813, 13, 15}, { -9749, 7, 14}, { -9689, 15, 15}, { -9633, 1, 11}, + { -9580, 17, 15}, { -9531, 9, 14}, { -9484, 19, 15}, { -9439, 5, 13}, + { -9397, 21, 15}, { -9356, 11, 14}, { -9318, 23, 15}, { -9281, 3, 12}, + { -9245, 25, 15}, { -9211, 13, 14}, { -9178, 27, 15}, { -9147, 7, 13}, + { -9116, 29, 15}, { -9087, 15, 14}, { -9058, 31, 15}, { -9031, 1, 10}, + { -8978, 17, 14}, { -8929, 9, 13}, { -8882, 19, 14}, { -8837, 5, 12}, + { -8795, 21, 14}, { -8754, 11, 13}, { -8716, 23, 14}, { -8679, 3, 11}, + { -8643, 25, 14}, { -8609, 13, 13}, { -8576, 27, 14}, { -8545, 7, 12}, + { -8514, 29, 14}, { -8485, 15, 13}, { -8456, 31, 14}, { -8429, 1, 9}, + { -8376, 17, 13}, { -8327, 9, 12}, { -8280, 19, 13}, { -8235, 5, 11}, + { -8193, 21, 13}, { -8152, 11, 12}, { -8114, 23, 13}, { -8077, 3, 10}, + { -8041, 25, 13}, { -8007, 13, 12}, { -7974, 27, 13}, { -7943, 7, 11}, + { -7912, 29, 13}, { -7883, 15, 12}, { -7854, 31, 13}, { -7827, 1, 8}, + { -7774, 17, 12}, { -7724, 9, 11}, { -7678, 19, 12}, { -7633, 5, 10}, + { -7591, 21, 12}, { -7550, 11, 11}, { -7512, 23, 12}, { -7475, 3, 9}, + { -7439, 25, 12}, { -7405, 13, 11}, { -7372, 27, 12}, { -7341, 7, 10}, + { -7310, 29, 12}, { -7281, 15, 11}, { -7252, 31, 12}, { -7225, 1, 7}, + { -7172, 17, 11}, { -7122, 9, 10}, { -7075, 19, 11}, { -7031, 5, 9}, + { -6989, 21, 11}, { -6948, 11, 10}, { -6910, 23, 11}, { -6873, 3, 8}, + { -6837, 25, 11}, { -6803, 13, 10}, { -6770, 27, 11}, { -6739, 7, 9}, + { -6708, 29, 11}, { -6679, 15, 10}, { -6650, 31, 11}, { -6623, 1, 6}, + { -6570, 17, 10}, { -6520, 9, 9}, { -6473, 19, 10}, { -6429, 5, 8}, + { -6386, 21, 10}, { -6346, 11, 9}, { -6307, 23, 10}, { -6270, 3, 7}, + { -6235, 25, 10}, { -6201, 13, 9}, { -6168, 27, 10}, { -6137, 7, 8}, + { -6106, 29, 10}, { -6077, 15, 9}, { -6048, 31, 10}, { -6021, 1, 5}, + { -5968, 17, 9}, { -5918, 9, 8}, { -5871, 19, 9}, { -5827, 5, 7}, + { -5784, 21, 9}, { -5744, 11, 8}, { -5705, 23, 9}, { -5668, 3, 6}, + { -5633, 25, 9}, { -5599, 13, 8}, { -5566, 27, 9}, { -5535, 7, 7}, + { -5504, 29, 9}, { -5475, 15, 8}, { -5446, 31, 9}, { -5419, 1, 4}, + { -5366, 17, 8}, { -5316, 9, 7}, { -5269, 19, 8}, { -5225, 5, 6}, + { -5182, 21, 8}, { -5142, 11, 7}, { -5103, 23, 8}, { -5066, 3, 5}, + { -5031, 25, 8}, { -4997, 13, 7}, { -4964, 27, 8}, { -4932, 7, 6}, + { -4902, 29, 8}, { -4873, 15, 7}, { -4844, 31, 8}, { -4816, 1, 3}, + { -4764, 17, 7}, { -4714, 9, 6}, { -4667, 19, 7}, { -4623, 5, 5}, + { -4580, 21, 7}, { -4540, 11, 6}, { -4501, 23, 7}, { -4464, 3, 4}, + { -4429, 25, 7}, { -4395, 13, 6}, { -4362, 27, 7}, { -4330, 7, 5}, + { -4300, 29, 7}, { -4270, 15, 6}, { -4242, 31, 7}, { -4214, 1, 2}, + { -4162, 17, 6}, { -4112, 9, 5}, { -4065, 19, 6}, { -4021, 5, 4}, + { -3978, 21, 6}, { -3938, 11, 5}, { -3899, 23, 6}, { -3862, 3, 3}, + { -3827, 25, 6}, { -3793, 13, 5}, { -3760, 27, 6}, { -3728, 7, 4}, + { -3698, 29, 6}, { -3668, 15, 5}, { -3640, 31, 6}, { -3612, 1, 1}, + { -3560, 17, 5}, { -3510, 9, 4}, { -3463, 19, 5}, { -3419, 5, 3}, + { -3376, 21, 5}, { -3336, 11, 4}, { -3297, 23, 5}, { -3260, 3, 2}, + { -3225, 25, 5}, { -3191, 13, 4}, { -3158, 27, 5}, { -3126, 7, 3}, + { -3096, 29, 5}, { -3066, 15, 4}, { -3038, 31, 5}, { -3010, 1, 0}, + { -2958, 17, 4}, { -2908, 9, 3}, { -2861, 19, 4}, { -2816, 5, 2}, + { -2774, 21, 4}, { -2734, 11, 3}, { -2695, 23, 4}, { -2658, 3, 1}, + { -2623, 25, 4}, { -2589, 13, 3}, { -2556, 27, 4}, { -2524, 7, 2}, + { -2494, 29, 4}, { -2464, 15, 3}, { -2436, 31, 4}, { -2408, 2, 0}, + { -2356, 17, 3}, { -2306, 9, 2}, { -2259, 19, 3}, { -2214, 5, 1}, + { -2172, 21, 3}, { -2132, 11, 2}, { -2093, 23, 3}, { -2056, 3, 0}, + { -2021, 25, 3}, { -1987, 13, 2}, { -1954, 27, 3}, { -1922, 7, 1}, + { -1892, 29, 3}, { -1862, 15, 2}, { -1834, 31, 3}, { -1806, 4, 0}, + { -1754, 17, 2}, { -1704, 9, 1}, { -1657, 19, 2}, { -1612, 5, 0}, + { -1570, 21, 2}, { -1530, 11, 1}, { -1491, 23, 2}, { -1454, 6, 0}, + { -1419, 25, 2}, { -1384, 13, 1}, { -1352, 27, 2}, { -1320, 7, 0}, + { -1290, 29, 2}, { -1260, 15, 1}, { -1232, 31, 2}, { -1204, 8, 0}, + { -1151, 17, 1}, { -1102, 9, 0}, { -1055, 19, 1}, { -1010, 10, 0}, + { -968, 21, 1}, { -928, 11, 0}, { -889, 23, 1}, { -852, 12, 0}, + { -816, 25, 1}, { -782, 13, 0}, { -750, 27, 1}, { -718, 14, 0}, + { -688, 29, 1}, { -658, 15, 0}, { -630, 31, 1}, { -602, 16, 0}, + { -549, 17, 0}, { -500, 18, 0}, { -453, 19, 0}, { -408, 20, 0}, + { -366, 21, 0}, { -325, 22, 0}, { -287, 23, 0}, { -250, 24, 0}, + { -214, 25, 0}, { -180, 26, 0}, { -148, 27, 0}, { -116, 28, 0}, + { -86, 29, 0}, { -56, 30, 0}, { -28, 31, 0}, { 0, 0, 0}, +}; + +static int pm860x_volatile(unsigned int reg) +{ + BUG_ON(reg >= REG_CACHE_SIZE); + + switch (reg) { + case PM860X_AUDIO_SUPPLIES_2: + return 1; + } + + return 0; +} + +static unsigned int pm860x_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (pm860x_volatile(reg)) + return cache[reg]; + + reg += REG_CACHE_BASE; + + return pm860x_reg_read(codec->control_data, reg); +} + +static int pm860x_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (!pm860x_volatile(reg)) + cache[reg] = (unsigned char)value; + + reg += REG_CACHE_BASE; + + return pm860x_reg_write(codec->control_data, reg, value); +} + +static int snd_soc_get_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int val[2], val2[2], i; + + val[0] = snd_soc_read(codec, reg) & 0x3f; + val[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT) >> 4) & 0xf; + val2[0] = snd_soc_read(codec, reg2) & 0x3f; + val2[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT)) & 0xf; + + for (i = 0; i < ARRAY_SIZE(st_table); i++) { + if ((st_table[i].m == val[0]) && (st_table[i].n == val[1])) + ucontrol->value.integer.value[0] = i; + if ((st_table[i].m == val2[0]) && (st_table[i].n == val2[1])) + ucontrol->value.integer.value[1] = i; + } + return 0; +} + +static int snd_soc_put_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int err; + unsigned int val, val2; + + val = ucontrol->value.integer.value[0]; + val2 = ucontrol->value.integer.value[1]; + + err = snd_soc_update_bits(codec, reg, 0x3f, st_table[val].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0xf0, + st_table[val].n << 4); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, 0x3f, st_table[val2].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0x0f, + st_table[val2].n); + return err; +} + +static int snd_soc_get_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max, val, val2; + unsigned int mask = (1 << fls(max)) - 1; + + val = snd_soc_read(codec, reg) >> shift; + val2 = snd_soc_read(codec, reg2) >> shift; + ucontrol->value.integer.value[0] = (max - val) & mask; + ucontrol->value.integer.value[1] = (max - val2) & mask; + + return 0; +} + +static int snd_soc_put_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max; + unsigned int mask = (1 << fls(max)) - 1; + int err; + unsigned int val, val2, val_mask; + + val_mask = mask << shift; + val = ((max - ucontrol->value.integer.value[0]) & mask); + val2 = ((max - ucontrol->value.integer.value[1]) & mask); + + val = val << shift; + val2 = val2 << shift; + + err = snd_soc_update_bits(codec, reg, val_mask, val); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, val_mask, val2); + return err; +} + +/* DAPM Widget Events */ +/* + * A lot registers are belong to RSYNC domain. It requires enabling RSYNC bit + * after updating these registers. Otherwise, these updated registers won't + * be effective. + */ +static int pm860x_rsync_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + /* + * automute will be set before DAC enabling. automute is used to + * anti-pop. + */ + if (pm860x->automute) { + mutex_lock(&pm860x->mutex); + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, 0); + pm860x->automute = 0; + mutex_unlock(&pm860x->mutex); + } + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned int dac = 0; + int data; + + if (!strcmp(w->name, "Left DAC")) + dac = DAC_LEFT; + if (!strcmp(w->name, "Right DAC")) + dac = DAC_RIGHT; + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (dac) { + /* automute is set before operating DAC. Anti-pop */ + mutex_lock(&pm860x->mutex); + pm860x->automute = 1; + dac |= MODULATOR; + /* mute */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + mutex_unlock(&pm860x->mutex); + /* update dac */ + snd_soc_update_bits(codec, PM860X_DAC_EN_2, + dac, dac); + } + break; + case SND_SOC_DAPM_PRE_PMD: + if (dac) { + mutex_lock(&pm860x->mutex); + pm860x->automute = 1; + /* mute */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + mutex_unlock(&pm860x->mutex); + /* update dac */ + data = snd_soc_read(codec, PM860X_DAC_EN_2); + data &= ~dac; + if (!(data & (DAC_LEFT | DAC_RIGHT))) + data &= ~MODULATOR; + snd_soc_write(codec, PM860X_DAC_EN_2, data); + } + break; + } + return 0; +} + +static const char *pm860x_opamp_texts[] = {"-50%", "-25%", "0%", "75%"}; + +static const char *pm860x_pa_texts[] = {"-33%", "0%", "33%", "66%"}; + +static const struct soc_enum pm860x_hs1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs1_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_hs2_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo1_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo2_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 5, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_ear_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_2, 0, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_ear_opamp_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 3, 4, pm860x_opamp_texts); + +static const struct snd_kcontrol_new pm860x_snd_controls[] = { + SOC_DOUBLE_R_TLV("ADC Capture Volume", PM860X_ADC_ANA_2, + PM860X_ADC_ANA_3, 6, 3, 0, adc_tlv), + SOC_DOUBLE_TLV("AUX Capture Volume", PM860X_ADC_ANA_3, 0, 3, 7, 0, + aux_tlv), + SOC_SINGLE_TLV("MIC1 Capture Volume", PM860X_ADC_ANA_2, 0, 7, 0, + mic_tlv), + SOC_SINGLE_TLV("MIC3 Capture Volume", PM860X_ADC_ANA_2, 3, 7, 0, + mic_tlv), + SOC_DOUBLE_R_EXT_TLV("Sidetone Volume", PM860X_SIDETONE_L_GAIN, + PM860X_SIDETONE_R_GAIN, 0, ARRAY_SIZE(st_table)-1, + 0, snd_soc_get_volsw_2r_st, + snd_soc_put_volsw_2r_st, st_tlv), + SOC_SINGLE_TLV("Speaker Playback Volume", PM860X_EAR_CTRL_1, + 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Line Playback Volume", PM860X_LO1_CTRL, + PM860X_LO2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Headset Playback Volume", PM860X_HS1_CTRL, + PM860X_HS2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Left Playback Volume", + PM860X_HIFIL_GAIN_LEFT, + PM860X_HIFIL_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Right Playback Volume", + PM860X_HIFIR_GAIN_LEFT, + PM860X_HIFIR_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Lofi Playback Volume", PM860X_LOFI_GAIN_LEFT, + PM860X_LOFI_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_ENUM("Headset1 Operational Amplifier Current", + pm860x_hs1_opamp_enum), + SOC_ENUM("Headset2 Operational Amplifier Current", + pm860x_hs2_opamp_enum), + SOC_ENUM("Headset1 Amplifier Current", pm860x_hs1_pa_enum), + SOC_ENUM("Headset2 Amplifier Current", pm860x_hs2_pa_enum), + SOC_ENUM("Lineout1 Operational Amplifier Current", + pm860x_lo1_opamp_enum), + SOC_ENUM("Lineout2 Operational Amplifier Current", + pm860x_lo2_opamp_enum), + SOC_ENUM("Lineout1 Amplifier Current", pm860x_lo1_pa_enum), + SOC_ENUM("Lineout2 Amplifier Current", pm860x_lo2_pa_enum), + SOC_ENUM("Speaker Operational Amplifier Current", + pm860x_spk_ear_opamp_enum), + SOC_ENUM("Speaker Amplifier Current", pm860x_spk_pa_enum), + SOC_ENUM("Earpiece Amplifier Current", pm860x_ear_pa_enum), +}; + +/* + * DAPM Controls + */ + +/* PCM Switch / PCM Interface */ +static const struct snd_kcontrol_new pcm_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ADC_EN_2, 0, 1, 0); + +/* AUX1 Switch */ +static const struct snd_kcontrol_new aux1_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 4, 1, 0); + +/* AUX2 Switch */ +static const struct snd_kcontrol_new aux2_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 5, 1, 0); + +/* Left Ex. PA Switch */ +static const struct snd_kcontrol_new lepa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 2, 1, 0); + +/* Right Ex. PA Switch */ +static const struct snd_kcontrol_new repa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 1, 1, 0); + +/* PCM Mux / Mux7 */ +static const char *aif1_text[] = { + "PCM L", "PCM R", +}; + +static const struct soc_enum aif1_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 6, 2, aif1_text); + +static const struct snd_kcontrol_new aif1_mux = + SOC_DAPM_ENUM("PCM Mux", aif1_enum); + +/* I2S Mux / Mux9 */ +static const char *i2s_din_text[] = { + "DIN", "DIN1", +}; + +static const struct soc_enum i2s_din_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 1, 2, i2s_din_text); + +static const struct snd_kcontrol_new i2s_din_mux = + SOC_DAPM_ENUM("I2S DIN Mux", i2s_din_enum); + +/* I2S Mic Mux / Mux8 */ +static const char *i2s_mic_text[] = { + "Ex PA", "ADC", +}; + +static const struct soc_enum i2s_mic_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 4, 2, i2s_mic_text); + +static const struct snd_kcontrol_new i2s_mic_mux = + SOC_DAPM_ENUM("I2S Mic Mux", i2s_mic_enum); + +/* ADCL Mux / Mux2 */ +static const char *adcl_text[] = { + "ADCR", "ADCL", +}; + +static const struct soc_enum adcl_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 4, 2, adcl_text); + +static const struct snd_kcontrol_new adcl_mux = + SOC_DAPM_ENUM("ADC Left Mux", adcl_enum); + +/* ADCR Mux / Mux3 */ +static const char *adcr_text[] = { + "ADCL", "ADCR", +}; + +static const struct soc_enum adcr_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 2, 2, adcr_text); + +static const struct snd_kcontrol_new adcr_mux = + SOC_DAPM_ENUM("ADC Right Mux", adcr_enum); + +/* ADCR EC Mux / Mux6 */ +static const char *adcr_ec_text[] = { + "ADCR", "EC", +}; + +static const struct soc_enum adcr_ec_enum = + SOC_ENUM_SINGLE(PM860X_ADC_EN_2, 3, 2, adcr_ec_text); + +static const struct snd_kcontrol_new adcr_ec_mux = + SOC_DAPM_ENUM("ADCR EC Mux", adcr_ec_enum); + +/* EC Mux / Mux4 */ +static const char *ec_text[] = { + "Left", "Right", "Left + Right", +}; + +static const struct soc_enum ec_enum = + SOC_ENUM_SINGLE(PM860X_EC_PATH, 1, 3, ec_text); + +static const struct snd_kcontrol_new ec_mux = + SOC_DAPM_ENUM("EC Mux", ec_enum); + +static const char *dac_text[] = { + "No input", "Right", "Left", "No input", +}; + +/* DAC Headset 1 Mux / Mux10 */ +static const struct soc_enum dac_hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs1_mux = + SOC_DAPM_ENUM("DAC HS1 Mux", dac_hs1_enum); + +/* DAC Headset 2 Mux / Mux11 */ +static const struct soc_enum dac_hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 2, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs2_mux = + SOC_DAPM_ENUM("DAC HS2 Mux", dac_hs2_enum); + +/* DAC Lineout 1 Mux / Mux12 */ +static const struct soc_enum dac_lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 4, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo1_mux = + SOC_DAPM_ENUM("DAC LO1 Mux", dac_lo1_enum); + +/* DAC Lineout 2 Mux / Mux13 */ +static const struct soc_enum dac_lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 6, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo2_mux = + SOC_DAPM_ENUM("DAC LO2 Mux", dac_lo2_enum); + +/* DAC Spearker Earphone Mux / Mux14 */ +static const struct soc_enum dac_spk_ear_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_2, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_spk_ear_mux = + SOC_DAPM_ENUM("DAC SP Mux", dac_spk_ear_enum); + +/* Headset 1 Mux / Mux15 */ +static const char *in_text[] = { + "Digital", "Analog", +}; + +static const struct soc_enum hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 0, 2, in_text); + +static const struct snd_kcontrol_new hs1_mux = + SOC_DAPM_ENUM("Headset1 Mux", hs1_enum); + +/* Headset 2 Mux / Mux16 */ +static const struct soc_enum hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 1, 2, in_text); + +static const struct snd_kcontrol_new hs2_mux = + SOC_DAPM_ENUM("Headset2 Mux", hs2_enum); + +/* Lineout 1 Mux / Mux17 */ +static const struct soc_enum lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 2, 2, in_text); + +static const struct snd_kcontrol_new lo1_mux = + SOC_DAPM_ENUM("Lineout1 Mux", lo1_enum); + +/* Lineout 2 Mux / Mux18 */ +static const struct soc_enum lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 3, 2, in_text); + +static const struct snd_kcontrol_new lo2_mux = + SOC_DAPM_ENUM("Lineout2 Mux", lo2_enum); + +/* Speaker Earpiece Demux */ +static const char *spk_text[] = { + "Earpiece", "Speaker", +}; + +static const struct soc_enum spk_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 6, 2, spk_text); + +static const struct snd_kcontrol_new spk_demux = + SOC_DAPM_ENUM("Speaker Earpiece Demux", spk_enum); + +/* MIC Mux / Mux1 */ +static const char *mic_text[] = { + "Mic 1", "Mic 2", +}; + +static const struct soc_enum mic_enum = + SOC_ENUM_SINGLE(PM860X_ADC_ANA_4, 4, 2, mic_text); + +static const struct snd_kcontrol_new mic_mux = + SOC_DAPM_ENUM("MIC Mux", mic_enum); + +static const struct snd_soc_dapm_widget pm860x_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("PCM SDI", "PCM Playback", 0, + PM860X_ADC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("PCM SDO", "PCM Capture", 0, + PM860X_PCM_IFACE_3, 1, 1), + + + SND_SOC_DAPM_AIF_IN("I2S DIN", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_IN("I2S DIN1", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("I2S DOUT", "I2S Capture", 0, + PM860X_I2S_IFACE_3, 5, 1), + SND_SOC_DAPM_MUX("I2S Mic Mux", SND_SOC_NOPM, 0, 0, &i2s_mic_mux), + SND_SOC_DAPM_MUX("ADC Left Mux", SND_SOC_NOPM, 0, 0, &adcl_mux), + SND_SOC_DAPM_MUX("ADC Right Mux", SND_SOC_NOPM, 0, 0, &adcr_mux), + SND_SOC_DAPM_MUX("EC Mux", SND_SOC_NOPM, 0, 0, &ec_mux), + SND_SOC_DAPM_MUX("ADCR EC Mux", SND_SOC_NOPM, 0, 0, &adcr_ec_mux), + SND_SOC_DAPM_SWITCH("Left EPA", SND_SOC_NOPM, 0, 0, + &lepa_switch_controls), + SND_SOC_DAPM_SWITCH("Right EPA", SND_SOC_NOPM, 0, 0, + &repa_switch_controls), + + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "Left ADC MOD", PM860X_ADC_EN_1, + 0, 1, 1, 0), + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "Right ADC MOD", PM860X_ADC_EN_1, + 1, 1, 1, 0), + SND_SOC_DAPM_ADC("Left ADC", NULL, PM860X_ADC_EN_2, 5, 0), + SND_SOC_DAPM_ADC("Right ADC", NULL, PM860X_ADC_EN_2, 4, 0), + + SND_SOC_DAPM_SWITCH("AUX1 Switch", SND_SOC_NOPM, 0, 0, + &aux1_switch_controls), + SND_SOC_DAPM_SWITCH("AUX2 Switch", SND_SOC_NOPM, 0, 0, + &aux2_switch_controls), + + SND_SOC_DAPM_MUX("MIC Mux", SND_SOC_NOPM, 0, 0, &mic_mux), + SND_SOC_DAPM_MICBIAS("Mic1 Bias", PM860X_ADC_ANA_1, 2, 0), + SND_SOC_DAPM_MICBIAS("Mic3 Bias", PM860X_ADC_ANA_1, 7, 0), + SND_SOC_DAPM_PGA("MIC1 Volume", PM860X_ADC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("MIC3 Volume", PM860X_ADC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX1 Volume", PM860X_ADC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX2 Volume", PM860X_ADC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("Sidetone PGA", PM860X_ADC_EN_2, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lofi PGA", PM860X_ADC_EN_2, 2, 0, NULL, 0), + + SND_SOC_DAPM_INPUT("AUX1"), + SND_SOC_DAPM_INPUT("AUX2"), + SND_SOC_DAPM_INPUT("MIC1P"), + SND_SOC_DAPM_INPUT("MIC1N"), + SND_SOC_DAPM_INPUT("MIC2P"), + SND_SOC_DAPM_INPUT("MIC2N"), + SND_SOC_DAPM_INPUT("MIC3P"), + SND_SOC_DAPM_INPUT("MIC3N"), + + SND_SOC_DAPM_DAC_E("Left DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_DAC_E("Right DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_MUX("I2S DIN Mux", SND_SOC_NOPM, 0, 0, &i2s_din_mux), + SND_SOC_DAPM_MUX("DAC HS1 Mux", SND_SOC_NOPM, 0, 0, &dac_hs1_mux), + SND_SOC_DAPM_MUX("DAC HS2 Mux", SND_SOC_NOPM, 0, 0, &dac_hs2_mux), + SND_SOC_DAPM_MUX("DAC LO1 Mux", SND_SOC_NOPM, 0, 0, &dac_lo1_mux), + SND_SOC_DAPM_MUX("DAC LO2 Mux", SND_SOC_NOPM, 0, 0, &dac_lo2_mux), + SND_SOC_DAPM_MUX("DAC SP Mux", SND_SOC_NOPM, 0, 0, &dac_spk_ear_mux), + SND_SOC_DAPM_MUX("Headset1 Mux", SND_SOC_NOPM, 0, 0, &hs1_mux), + SND_SOC_DAPM_MUX("Headset2 Mux", SND_SOC_NOPM, 0, 0, &hs2_mux), + SND_SOC_DAPM_MUX("Lineout1 Mux", SND_SOC_NOPM, 0, 0, &lo1_mux), + SND_SOC_DAPM_MUX("Lineout2 Mux", SND_SOC_NOPM, 0, 0, &lo2_mux), + SND_SOC_DAPM_MUX("Speaker Earpiece Demux", SND_SOC_NOPM, 0, 0, + &spk_demux), + + + SND_SOC_DAPM_PGA("Headset1 PGA", PM860X_DAC_EN_1, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Headset2 PGA", PM860X_DAC_EN_1, 1, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("HS1"), + SND_SOC_DAPM_OUTPUT("HS2"), + SND_SOC_DAPM_PGA("Lineout1 PGA", PM860X_DAC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lineout2 PGA", PM860X_DAC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LINEOUT1"), + SND_SOC_DAPM_OUTPUT("LINEOUT2"), + SND_SOC_DAPM_PGA("Earpiece PGA", PM860X_DAC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("EARP"), + SND_SOC_DAPM_OUTPUT("EARN"), + SND_SOC_DAPM_PGA("Speaker PGA", PM860X_DAC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LSP"), + SND_SOC_DAPM_OUTPUT("LSN"), + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "VCODEC", PM860X_AUDIO_SUPPLIES_2, + 0, SUPPLY_MASK, SUPPLY_MASK, 0), + + PM860X_DAPM_OUTPUT("RSYNC", pm860x_rsync_event), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* supply */ + {"Left DAC", NULL, "VCODEC"}, + {"Right DAC", NULL, "VCODEC"}, + {"Left ADC", NULL, "VCODEC"}, + {"Right ADC", NULL, "VCODEC"}, + {"Left ADC", NULL, "Left ADC MOD"}, + {"Right ADC", NULL, "Right ADC MOD"}, + + /* PCM/AIF1 Inputs */ + {"PCM SDO", NULL, "ADC Left Mux"}, + {"PCM SDO", NULL, "ADCR EC Mux"}, + + /* PCM/AFI2 Outputs */ + {"Lofi PGA", NULL, "PCM SDI"}, + {"Lofi PGA", NULL, "Sidetone PGA"}, + {"Left DAC", NULL, "Lofi PGA"}, + {"Right DAC", NULL, "Lofi PGA"}, + + /* I2S/AIF2 Inputs */ + {"MIC Mux", "Mic 1", "MIC1P"}, + {"MIC Mux", "Mic 1", "MIC1N"}, + {"MIC Mux", "Mic 2", "MIC2P"}, + {"MIC Mux", "Mic 2", "MIC2N"}, + {"MIC1 Volume", NULL, "MIC Mux"}, + {"MIC3 Volume", NULL, "MIC3P"}, + {"MIC3 Volume", NULL, "MIC3N"}, + {"Left ADC", NULL, "MIC1 Volume"}, + {"Right ADC", NULL, "MIC3 Volume"}, + {"ADC Left Mux", "ADCR", "Right ADC"}, + {"ADC Left Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCR", "Right ADC"}, + {"Left EPA", "Switch", "Left DAC"}, + {"Right EPA", "Switch", "Right DAC"}, + {"EC Mux", "Left", "Left DAC"}, + {"EC Mux", "Right", "Right DAC"}, + {"EC Mux", "Left + Right", "Left DAC"}, + {"EC Mux", "Left + Right", "Right DAC"}, + {"ADCR EC Mux", "ADCR", "ADC Right Mux"}, + {"ADCR EC Mux", "EC", "EC Mux"}, + {"I2S Mic Mux", "Ex PA", "Left EPA"}, + {"I2S Mic Mux", "Ex PA", "Right EPA"}, + {"I2S Mic Mux", "ADC", "ADC Left Mux"}, + {"I2S Mic Mux", "ADC", "ADCR EC Mux"}, + {"I2S DOUT", NULL, "I2S Mic Mux"}, + + /* I2S/AIF2 Outputs */ + {"I2S DIN Mux", "DIN", "I2S DIN"}, + {"I2S DIN Mux", "DIN1", "I2S DIN1"}, + {"Left DAC", NULL, "I2S DIN Mux"}, + {"Right DAC", NULL, "I2S DIN Mux"}, + {"DAC HS1 Mux", "Left", "Left DAC"}, + {"DAC HS1 Mux", "Right", "Right DAC"}, + {"DAC HS2 Mux", "Left", "Left DAC"}, + {"DAC HS2 Mux", "Right", "Right DAC"}, + {"DAC LO1 Mux", "Left", "Left DAC"}, + {"DAC LO1 Mux", "Right", "Right DAC"}, + {"DAC LO2 Mux", "Left", "Left DAC"}, + {"DAC LO2 Mux", "Right", "Right DAC"}, + {"Headset1 Mux", "Digital", "DAC HS1 Mux"}, + {"Headset2 Mux", "Digital", "DAC HS2 Mux"}, + {"Lineout1 Mux", "Digital", "DAC LO1 Mux"}, + {"Lineout2 Mux", "Digital", "DAC LO2 Mux"}, + {"Headset1 PGA", NULL, "Headset1 Mux"}, + {"Headset2 PGA", NULL, "Headset2 Mux"}, + {"Lineout1 PGA", NULL, "Lineout1 Mux"}, + {"Lineout2 PGA", NULL, "Lineout2 Mux"}, + {"DAC SP Mux", "Left", "Left DAC"}, + {"DAC SP Mux", "Right", "Right DAC"}, + {"Speaker Earpiece Demux", "Speaker", "DAC SP Mux"}, + {"Speaker PGA", NULL, "Speaker Earpiece Demux"}, + {"Earpiece PGA", NULL, "Speaker Earpiece Demux"}, + + {"HS1", NULL, "Headset1 PGA"}, + {"HS2", NULL, "Headset2 PGA"}, + {"LINEOUT1", NULL, "Lineout1 PGA"}, + {"LINEOUT2", NULL, "Lineout2 PGA"}, + {"LSP", NULL, "Speaker PGA"}, + {"LSN", NULL, "Speaker PGA"}, + {"EARP", NULL, "Earpiece PGA"}, + {"EARN", NULL, "Earpiece PGA"}, + + {"RSYNC", NULL, "Headset1 PGA"}, + {"RSYNC", NULL, "Headset2 PGA"}, + {"RSYNC", NULL, "Lineout1 PGA"}, + {"RSYNC", NULL, "Lineout2 PGA"}, + {"RSYNC", NULL, "Speaker PGA"}, + {"RSYNC", NULL, "Earpiece PGA"}, +}; + +static int pm860x_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int data = 0; + + if (mute) + data = DAC_MUTE; + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, data); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf = 0, mask = 0; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf &= ~PCM_INF2_18WL; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf |= PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + mask |= PCM_INF2_18WL; + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 16000: + inf = 3; + break; + case 32000: + inf = 6; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_PCM_RATE, 0x0f, inf); + + return 0; +} + +static int pm860x_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int ret = -EINVAL; + + mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + if (pm860x->dir == PM860X_CLK_DIR_OUT) { + inf |= PCM_INF2_MASTER; + ret = 0; + } + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) { + inf &= ~PCM_INF2_MASTER; + ret = 0; + } + break; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + inf |= PCM_EXACT_I2S; + ret = 0; + break; + } + mask |= PCM_MODE_MASK; + if (ret) + return ret; + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + return 0; +} + +static int pm860x_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + if (dir == PM860X_CLK_DIR_OUT) + pm860x->dir = PM860X_CLK_DIR_OUT; + else { + pm860x->dir = PM860X_CLK_DIR_IN; + return -EINVAL; + } + + return 0; +} + +static int pm860x_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf = 0; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf = PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, PCM_INF2_18WL, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 11025: + inf = 1; + break; + case 16000: + inf = 3; + break; + case 22050: + inf = 4; + break; + case 32000: + inf = 6; + break; + case 44100: + inf = 7; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_4, 0xf, inf); + + return 0; +} + +static int pm860x_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int ret = -EINVAL; + + mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + if (pm860x->dir == PM860X_CLK_DIR_OUT) { + inf |= PCM_INF2_MASTER; + ret = 0; + } + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) { + inf &= ~PCM_INF2_MASTER; + ret = 0; + } + break; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + inf |= PCM_EXACT_I2S; + ret = 0; + break; + } + mask |= PCM_MODE_MASK; + if (ret) + return ret; + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, mask, inf); + return 0; +} + +static int pm860x_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int data; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Enable Audio PLL & Audio section */ + data = AUDIO_PLL | AUDIO_SECTION_RESET + | AUDIO_SECTION_ON; + pm860x_reg_write(codec->control_data, REG_MISC2, data); + } + break; + + case SND_SOC_BIAS_OFF: + data = AUDIO_PLL | AUDIO_SECTION_RESET | AUDIO_SECTION_ON; + pm860x_set_bits(codec->control_data, REG_MISC2, data, 0); + break; + } + codec->bias_level = level; + return 0; +} + +static struct snd_soc_dai_ops pm860x_pcm_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_pcm_hw_params, + .set_fmt = pm860x_pcm_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops pm860x_i2s_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_i2s_hw_params, + .set_fmt = pm860x_i2s_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +#define PM860X_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000) + +static struct snd_soc_dai_driver pm860x_dai[] = { + { + /* DAI PCM */ + .name = "88pm860x-pcm", + .id = 1, + .playback = { + .stream_name = "PCM Playback", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "PCM Capture", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_pcm_dai_ops, + }, { + /* DAI I2S */ + .name = "88pm860x-i2s", + .id = 2, + .playback = { + .stream_name = "I2S Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "I2S Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_i2s_dai_ops, + }, +}; + +static irqreturn_t pm860x_codec_handler(int irq, void *data) +{ + struct pm860x_priv *pm860x = data; + int status, shrt, report = 0; + int mask; + + status = pm860x_reg_read(pm860x->i2c, REG_STATUS_1); + shrt = pm860x_reg_read(pm860x->i2c, REG_SHORTS); + mask = SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 + | SND_JACK_BTN_2; + + if ((pm860x->det.hs_det & SND_JACK_HEADPHONE) + && (status & HEADSET_STATUS)) + report |= SND_JACK_HEADPHONE; + + if ((pm860x->det.hs_det & SND_JACK_MICROPHONE) + && (status & MIC_STATUS)) + report |= SND_JACK_MICROPHONE; + + if ((pm860x->det.hs_shrt & SND_JACK_BTN_0) + && (shrt & (SHORT_HS1 | SHORT_HS2))) + report |= SND_JACK_BTN_0; + + if ((pm860x->det.hook_det & SND_JACK_BTN_1) + && (status & HOOK_STATUS)) + report |= SND_JACK_BTN_1; + + if ((pm860x->det.lo_shrt & SND_JACK_BTN_2) + && (shrt & (SHORT_LO1 | SHORT_LO2))) + report |= SND_JACK_BTN_2; + + snd_soc_jack_report(pm860x->det.jack, report, mask); + dev_dbg(pm860x->codec->dev, "report:0x%x, mask:%x\n", report, mask); + return IRQ_HANDLED; +} + +int pm860x_hs_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack, + int det, int shrt) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int data; + + pm860x->det.hs_det = 0; + pm860x->det.hs_shrt = 0; + pm860x->det.jack = jack; + + if (det & SND_JACK_MICROPHONE) { + pm860x->det.hs_det |= SND_JACK_MICROPHONE; + pm860x_set_bits(codec->control_data, REG_MIC_DET, + MICDET_MASK, MICDET_MASK); + } + if (det & SND_JACK_HEADPHONE) { + pm860x->det.hs_det |= SND_JACK_HEADPHONE; + pm860x_set_bits(codec->control_data, REG_HS_DET, + EN_HS_DET, EN_HS_DET); + } + /* headset short */ + if (shrt & SND_JACK_BTN_0) { + pm860x->det.hs_shrt |= SND_JACK_BTN_0; + data = CLR_SHORT_HS2 | CLR_SHORT_HS1; + pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + } + + /* sync status */ + pm860x_codec_handler(0, pm860x); + return 0; +} +EXPORT_SYMBOL_GPL(pm860x_hs_jack_detect); + +int pm860x_hook_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack, + int det, int shrt) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int data; + + pm860x->det.hook_det = 0; + pm860x->det.lo_shrt = 0; + pm860x->det.jack = jack; + + /* enable hook detect */ + if (det & SND_JACK_BTN_1) + pm860x->det.hook_det = SND_JACK_BTN_1; + /* Lineout short detect */ + if (shrt & SND_JACK_BTN_2) { + pm860x->det.lo_shrt = SND_JACK_BTN_2; + data = CLR_SHORT_LO2 | CLR_SHORT_LO1; + pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + } + + /* sync status */ + pm860x_codec_handler(0, pm860x); + return 0; +} +EXPORT_SYMBOL_GPL(pm860x_hook_detect); + +static int pm860x_probe(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i, ret; + + pm860x->codec = codec; + + codec->control_data = pm860x->i2c; + + for (i = 0; i < 4; i++) { + ret = request_threaded_irq(pm860x->irq[i], NULL, + pm860x_codec_handler, IRQF_ONESHOT, + pm860x->name[i], pm860x); + if (ret < 0) { + dev_err(codec->dev, "Failed to request IRQ!\n"); + goto out_irq; + } + } + + pm860x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + ret = pm860x_bulk_read(codec->control_data, REG_CACHE_BASE, + REG_CACHE_SIZE, codec->reg_cache); + if (ret < 0) { + dev_err(codec->dev, "Failed to fill register cache: %d\n", + ret); + goto out_codec; + } + + snd_soc_add_controls(codec, pm860x_snd_controls, + ARRAY_SIZE(pm860x_snd_controls)); + snd_soc_dapm_new_controls(codec, pm860x_dapm_widgets, + ARRAY_SIZE(pm860x_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + return 0; + +out_codec: + i = 3; +out_irq: + for (; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + return -EINVAL; +} + +static int pm860x_remove(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i; + + for (i = 3; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + pm860x_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_pm860x = { + .probe = pm860x_probe, + .remove = pm860x_remove, + .read = pm860x_read_reg_cache, + .write = pm860x_write_reg_cache, + .reg_cache_size = REG_CACHE_SIZE, + .reg_word_size = sizeof(u8), + .set_bias_level = pm860x_set_bias_level, +}; + +static int __devinit pm860x_codec_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_priv *pm860x; + struct resource *res; + int i, ret; + + pm860x = kzalloc(sizeof(struct pm860x_priv), GFP_KERNEL); + if (pm860x == NULL) + return -ENOMEM; + + pm860x->chip = chip; + pm860x->i2c = (chip->id == CHIP_PM8607) ? chip->client + : chip->companion; + platform_set_drvdata(pdev, pm860x); + mutex_init(&pm860x->mutex); + + for (i = 0; i < 4; i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + if (!res) { + dev_err(&pdev->dev, "Failed to get IRQ resources\n"); + goto out; + } + pm860x->irq[i] = res->start + chip->irq_base; + strncpy(pm860x->name[i], res->name, MAX_NAME_LEN); + } + + ret = snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pm860x, + pm860x_dai, ARRAY_SIZE(pm860x_dai)); + if (ret) { + dev_err(&pdev->dev, "Failed to register codec\n"); + goto out; + } + return ret; + +out: + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return -EINVAL; +} + +static int __devexit pm860x_codec_remove(struct platform_device *pdev) +{ + struct pm860x_priv *pm860x = platform_get_drvdata(pdev); + + snd_soc_unregister_codec(&pdev->dev); + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return 0; +} + +static struct platform_driver pm860x_codec_driver = { + .driver = { + .name = "88pm860x-codec", + .owner = THIS_MODULE, + }, + .probe = pm860x_codec_probe, + .remove = __devexit_p(pm860x_codec_remove), +}; + +static __init int pm860x_init(void) +{ + return platform_driver_register(&pm860x_codec_driver); +} +module_init(pm860x_init); + +static __exit void pm860x_exit(void) +{ + platform_driver_unregister(&pm860x_codec_driver); +} +module_exit(pm860x_exit); + +MODULE_DESCRIPTION("ASoC 88PM860x driver"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-codec"); + diff --git a/sound/soc/codecs/88pm860x-codec.h b/sound/soc/codecs/88pm860x-codec.h new file mode 100644 index 0000000..247c1a4 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.h @@ -0,0 +1,97 @@ +/* + * 88pm860x-codec.h -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __88PM860X_H +#define __88PM860X_H + +/* The offset of these registers are 0xb0 */ +#define PM860X_PCM_IFACE_1 0x00 +#define PM860X_PCM_IFACE_2 0x01 +#define PM860X_PCM_IFACE_3 0x02 +#define PM860X_PCM_RATE 0x03 +#define PM860X_EC_PATH 0x04 +#define PM860X_SIDETONE_L_GAIN 0x05 +#define PM860X_SIDETONE_R_GAIN 0x06 +#define PM860X_SIDETONE_SHIFT 0x07 +#define PM860X_ADC_OFFSET_1 0x08 +#define PM860X_ADC_OFFSET_2 0x09 +#define PM860X_DMIC_DELAY 0x0a + +#define PM860X_I2S_IFACE_1 0x0b +#define PM860X_I2S_IFACE_2 0x0c +#define PM860X_I2S_IFACE_3 0x0d +#define PM860X_I2S_IFACE_4 0x0e +#define PM860X_EQUALIZER_N0_1 0x0f +#define PM860X_EQUALIZER_N0_2 0x10 +#define PM860X_EQUALIZER_N1_1 0x11 +#define PM860X_EQUALIZER_N1_2 0x12 +#define PM860X_EQUALIZER_D1_1 0x13 +#define PM860X_EQUALIZER_D1_2 0x14 +#define PM860X_LOFI_GAIN_LEFT 0x15 +#define PM860X_LOFI_GAIN_RIGHT 0x16 +#define PM860X_HIFIL_GAIN_LEFT 0x17 +#define PM860X_HIFIL_GAIN_RIGHT 0x18 +#define PM860X_HIFIR_GAIN_LEFT 0x19 +#define PM860X_HIFIR_GAIN_RIGHT 0x1a +#define PM860X_DAC_OFFSET 0x1b +#define PM860X_OFFSET_LEFT_1 0x1c +#define PM860X_OFFSET_LEFT_2 0x1d +#define PM860X_OFFSET_RIGHT_1 0x1e +#define PM860X_OFFSET_RIGHT_2 0x1f +#define PM860X_ADC_ANA_1 0x20 +#define PM860X_ADC_ANA_2 0x21 +#define PM860X_ADC_ANA_3 0x22 +#define PM860X_ADC_ANA_4 0x23 +#define PM860X_ANA_TO_ANA 0x24 +#define PM860X_HS1_CTRL 0x25 +#define PM860X_HS2_CTRL 0x26 +#define PM860X_LO1_CTRL 0x27 +#define PM860X_LO2_CTRL 0x28 +#define PM860X_EAR_CTRL_1 0x29 +#define PM860X_EAR_CTRL_2 0x2a +#define PM860X_AUDIO_SUPPLIES_1 0x2b +#define PM860X_AUDIO_SUPPLIES_2 0x2c +#define PM860X_ADC_EN_1 0x2d +#define PM860X_ADC_EN_2 0x2e +#define PM860X_DAC_EN_1 0x2f +#define PM860X_DAC_EN_2 0x31 +#define PM860X_AUDIO_CAL_1 0x32 +#define PM860X_AUDIO_CAL_2 0x33 +#define PM860X_AUDIO_CAL_3 0x34 +#define PM860X_AUDIO_CAL_4 0x35 +#define PM860X_AUDIO_CAL_5 0x36 +#define PM860X_ANA_INPUT_SEL_1 0x37 +#define PM860X_ANA_INPUT_SEL_2 0x38 + +#define PM860X_PCM_IFACE_4 0x39 +#define PM860X_I2S_IFACE_5 0x3a + +#define PM860X_SHORTS 0x3b +#define PM860X_PLL_ADJ_1 0x3c +#define PM860X_PLL_ADJ_2 0x3d + +/* bits definition */ +#define PM860X_CLK_DIR_IN 0 +#define PM860X_CLK_DIR_OUT 1 + +#define PM860X_DET_HEADSET (1 << 0) +#define PM860X_DET_MIC (1 << 1) +#define PM860X_DET_HOOK (1 << 2) +#define PM860X_SHORT_HEADSET (1 << 3) +#define PM860X_SHORT_LINEOUT (1 << 4) +#define PM860X_DET_MASK 0x1F + +extern int pm860x_hs_jack_detect(struct snd_soc_codec *, struct snd_soc_jack *, + int, int); +extern int pm860x_hook_detect(struct snd_soc_codec *, struct snd_soc_jack *, + int, int); + +#endif /* __88PM860X_H */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index bfdd92b..a3cfc18 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -10,6 +10,7 @@ config SND_SOC_I2C_AND_SPI config SND_SOC_ALL_CODECS tristate "Build all ASoC CODEC drivers" + select SND_SOC_88PM860X if MFD_88PM860X select SND_SOC_L3 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS select SND_SOC_AD1836 if SPI_MASTER @@ -85,6 +86,9 @@ config SND_SOC_ALL_CODECS If unsure select "N". +config SND_SOC_88PM860X + tristate + config SND_SOC_WM_HUBS tristate default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 9c3c39f..b9c4358 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,3 +1,4 @@ +snd-soc-88pm860x-objs := 88pm860x-codec.o snd-soc-ac97-objs := ac97.o snd-soc-ad1836-objs := ad1836.o snd-soc-ad193x-objs := ad193x.o @@ -67,6 +68,7 @@ snd-soc-tpa6130a2-objs := tpa6130a2.o snd-soc-wm2000-objs := wm2000.o snd-soc-wm9090-objs := wm9090.o +obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o -- 1.5.6.5

1 0

[PATCH 1/3] ASoC: add 88pm860x codec driver
by Haojian Zhuang 12 Aug '10

12 Aug '10

Add 88PM860x codec driver. 88PM860x codec supports two interfaces. And it also supports headset/mic/hook/short detection. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/codecs/88pm860x-codec.c | 1486 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/88pm860x-codec.h | 97 +++ sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + 4 files changed, 1589 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/88pm860x-codec.c create mode 100644 sound/soc/codecs/88pm860x-codec.h diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c new file mode 100644 index 0000000..01d19e9 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.c @@ -0,0 +1,1486 @@ +/* + * 88pm860x-codec.c -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Author: Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/mfd/88pm860x.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> +#include <sound/jack.h> + +#include "88pm860x-codec.h" + +#define MAX_NAME_LEN 20 +#define REG_CACHE_SIZE 0x40 +#define REG_CACHE_BASE 0xb0 + +/* Status Register 1 (0x01) */ +#define REG_STATUS_1 0x01 +#define MIC_STATUS (1 << 7) +#define HOOK_STATUS (1 << 6) +#define HEADSET_STATUS (1 << 5) + +/* Mic Detection Register (0x37) */ +#define REG_MIC_DET 0x37 +#define CONTINUOUS_POLLING (3 << 1) +#define EN_MIC_DET (1 << 0) +#define MICDET_MASK 0x07 + +/* Headset Detection Register (0x38) */ +#define REG_HS_DET 0x38 +#define EN_HS_DET (1 << 0) + +/* Misc2 Register (0x42) */ +#define REG_MISC2 0x42 +#define AUDIO_PLL (1 << 5) +#define AUDIO_SECTION_RESET (1 << 4) +#define AUDIO_SECTION_ON (1 << 3) + +/* PCM Interface Register 2 (0xb1) */ +#define PCM_INF2_BCLK (1 << 6) /* Bit clock polarity */ +#define PCM_INF2_FS (1 << 5) /* Frame Sync polarity */ +#define PCM_INF2_MASTER (1 << 4) /* Master / Slave */ +#define PCM_INF2_18WL (1 << 3) /* 18 / 16 bits */ +#define PCM_GENERAL_I2S 0 +#define PCM_EXACT_I2S 1 +#define PCM_LEFT_I2S 2 +#define PCM_RIGHT_I2S 3 +#define PCM_SHORT_FS 4 +#define PCM_LONG_FS 5 +#define PCM_MODE_MASK 7 + +/* I2S Interface Register 4 (0xbe) */ +#define I2S_EQU_BYP (1 << 6) + +/* DAC Offset Register (0xcb) */ +#define DAC_MUTE (1 << 7) +#define MUTE_LEFT (1 << 6) +#define MUTE_RIGHT (1 << 2) + +/* ADC Analog Register 1 (0xd0) */ +#define REG_ADC_ANA_1 0xd0 +#define MIC1BIAS_MASK 0x60 + +/* Earpiece/Speaker Control Register 2 (0xda) */ +#define REG_EAR2 0xda +#define RSYNC_CHANGE (1 << 2) + +/* Audio Supplies Register 2 (0xdc) */ +#define REG_SUPPLIES2 0xdc +#define LDO15_READY (1 << 4) +#define LDO15_EN (1 << 3) +#define CPUMP_READY (1 << 2) +#define CPUMP_EN (1 << 1) +#define AUDIO_EN (1 << 0) +#define SUPPLY_MASK (LDO15_EN | CPUMP_EN | AUDIO_EN) + +/* Audio Enable Register 1 (0xdd) */ +#define ADC_MOD_RIGHT (1 << 1) +#define ADC_MOD_LEFT (1 << 0) + +/* Audio Enable Register 2 (0xde) */ +#define ADC_LEFT (1 << 5) +#define ADC_RIGHT (1 << 4) + +/* DAC Enable Register 2 (0xe1) */ +#define DAC_LEFT (1 << 5) +#define DAC_RIGHT (1 << 4) +#define MODULATOR (1 << 3) + +/* Shorts Register (0xeb) */ +#define REG_SHORTS 0xeb +#define CLR_SHORT_LO2 (1 << 7) +#define SHORT_LO2 (1 << 6) +#define CLR_SHORT_LO1 (1 << 5) +#define SHORT_LO1 (1 << 4) +#define CLR_SHORT_HS2 (1 << 3) +#define SHORT_HS2 (1 << 2) +#define CLR_SHORT_HS1 (1 << 1) +#define SHORT_HS1 (1 << 0) + +/* + * This widget should be just after DAC & PGA in DAPM power-on sequence and + * before DAC & PGA in DAPM power-off sequence. + */ +#define PM860X_DAPM_OUTPUT(wname, wevent) \ +{ .id = snd_soc_dapm_pga, .name = wname, .reg = SND_SOC_NOPM, \ + .shift = 0, .invert = 0, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD, } + +struct pm860x_det { + struct snd_soc_jack *hp_jack; + struct snd_soc_jack *mic_jack; + int hp_det; + int mic_det; + int hook_det; + int hs_shrt; + int lo_shrt; +}; + +struct pm860x_priv { + unsigned int sysclk; + unsigned int pcmclk; + unsigned int dir; + unsigned int filter; + struct snd_soc_codec *codec; + struct i2c_client *i2c; + struct pm860x_chip *chip; + struct pm860x_det det; + + int irq[4]; + unsigned char name[4][MAX_NAME_LEN]; + unsigned char reg_cache[REG_CACHE_SIZE]; +}; + +/* -9450dB to 0dB in 150dB steps ( mute instead of -9450dB) */ +static const DECLARE_TLV_DB_SCALE(dpga_tlv, -9450, 150, 1); + +/* -9dB to 0db in 3dB steps */ +static const DECLARE_TLV_DB_SCALE(adc_tlv, -900, 300, 0); + +/* {-23, -17, -13.5, -11, -9, -6, -3, 0}dB */ +static const unsigned int mic_tlv[] = { + TLV_DB_RANGE_HEAD(5), + 0, 0, TLV_DB_SCALE_ITEM(-2300, 0, 0), + 1, 1, TLV_DB_SCALE_ITEM(-1700, 0, 0), + 2, 2, TLV_DB_SCALE_ITEM(-1350, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(-1100, 0, 0), + 4, 7, TLV_DB_SCALE_ITEM(-900, 300, 0), +}; + +/* {0, 0, 0, -6, 0, 6, 12, 18}dB */ +static const unsigned int aux_tlv[] = { + TLV_DB_RANGE_HEAD(2), + 0, 2, TLV_DB_SCALE_ITEM(0, 0, 0), + 3, 7, TLV_DB_SCALE_ITEM(-600, 600, 0), +}; + +/* {-16, -13, -10, -7, -5.2, -3,3, -2.2, 0}dB, mute instead of -16dB */ +static const unsigned int out_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 3, TLV_DB_SCALE_ITEM(-1600, 300, 1), + 4, 4, TLV_DB_SCALE_ITEM(-520, 0, 0), + 5, 5, TLV_DB_SCALE_ITEM(-330, 0, 0), + 6, 7, TLV_DB_SCALE_ITEM(-220, 220, 0), +}; + +static const unsigned int st_tlv[] = { + TLV_DB_RANGE_HEAD(8), + 0, 1, TLV_DB_SCALE_ITEM(-12041, 602, 0), + 2, 3, TLV_DB_SCALE_ITEM(-11087, 250, 0), + 4, 5, TLV_DB_SCALE_ITEM(-10643, 158, 0), + 6, 7, TLV_DB_SCALE_ITEM(-10351, 116, 0), + 8, 9, TLV_DB_SCALE_ITEM(-10133, 92, 0), + 10, 13, TLV_DB_SCALE_ITEM(-9958, 70, 0), + 14, 17, TLV_DB_SCALE_ITEM(-9689, 53, 0), + 18, 271, TLV_DB_SCALE_ITEM(-9484, 37, 0), +}; + +/* Sidetone Gain = M * 2^(-5-N) */ +struct st_gain { + unsigned int db; + unsigned int m; + unsigned int n; +}; + +static struct st_gain st_table[] = { + {-12041, 1, 15}, {-11439, 1, 14}, {-11087, 3, 15}, {-10837, 1, 13}, + {-10643, 5, 15}, {-10485, 3, 14}, {-10351, 7, 15}, {-10235, 1, 12}, + {-10133, 9, 15}, {-10041, 5, 14}, { -9958, 11, 15}, { -9883, 3, 13}, + { -9813, 13, 15}, { -9749, 7, 14}, { -9689, 15, 15}, { -9633, 1, 11}, + { -9580, 17, 15}, { -9531, 9, 14}, { -9484, 19, 15}, { -9439, 5, 13}, + { -9397, 21, 15}, { -9356, 11, 14}, { -9318, 23, 15}, { -9281, 3, 12}, + { -9245, 25, 15}, { -9211, 13, 14}, { -9178, 27, 15}, { -9147, 7, 13}, + { -9116, 29, 15}, { -9087, 15, 14}, { -9058, 31, 15}, { -9031, 1, 10}, + { -8978, 17, 14}, { -8929, 9, 13}, { -8882, 19, 14}, { -8837, 5, 12}, + { -8795, 21, 14}, { -8754, 11, 13}, { -8716, 23, 14}, { -8679, 3, 11}, + { -8643, 25, 14}, { -8609, 13, 13}, { -8576, 27, 14}, { -8545, 7, 12}, + { -8514, 29, 14}, { -8485, 15, 13}, { -8456, 31, 14}, { -8429, 1, 9}, + { -8376, 17, 13}, { -8327, 9, 12}, { -8280, 19, 13}, { -8235, 5, 11}, + { -8193, 21, 13}, { -8152, 11, 12}, { -8114, 23, 13}, { -8077, 3, 10}, + { -8041, 25, 13}, { -8007, 13, 12}, { -7974, 27, 13}, { -7943, 7, 11}, + { -7912, 29, 13}, { -7883, 15, 12}, { -7854, 31, 13}, { -7827, 1, 8}, + { -7774, 17, 12}, { -7724, 9, 11}, { -7678, 19, 12}, { -7633, 5, 10}, + { -7591, 21, 12}, { -7550, 11, 11}, { -7512, 23, 12}, { -7475, 3, 9}, + { -7439, 25, 12}, { -7405, 13, 11}, { -7372, 27, 12}, { -7341, 7, 10}, + { -7310, 29, 12}, { -7281, 15, 11}, { -7252, 31, 12}, { -7225, 1, 7}, + { -7172, 17, 11}, { -7122, 9, 10}, { -7075, 19, 11}, { -7031, 5, 9}, + { -6989, 21, 11}, { -6948, 11, 10}, { -6910, 23, 11}, { -6873, 3, 8}, + { -6837, 25, 11}, { -6803, 13, 10}, { -6770, 27, 11}, { -6739, 7, 9}, + { -6708, 29, 11}, { -6679, 15, 10}, { -6650, 31, 11}, { -6623, 1, 6}, + { -6570, 17, 10}, { -6520, 9, 9}, { -6473, 19, 10}, { -6429, 5, 8}, + { -6386, 21, 10}, { -6346, 11, 9}, { -6307, 23, 10}, { -6270, 3, 7}, + { -6235, 25, 10}, { -6201, 13, 9}, { -6168, 27, 10}, { -6137, 7, 8}, + { -6106, 29, 10}, { -6077, 15, 9}, { -6048, 31, 10}, { -6021, 1, 5}, + { -5968, 17, 9}, { -5918, 9, 8}, { -5871, 19, 9}, { -5827, 5, 7}, + { -5784, 21, 9}, { -5744, 11, 8}, { -5705, 23, 9}, { -5668, 3, 6}, + { -5633, 25, 9}, { -5599, 13, 8}, { -5566, 27, 9}, { -5535, 7, 7}, + { -5504, 29, 9}, { -5475, 15, 8}, { -5446, 31, 9}, { -5419, 1, 4}, + { -5366, 17, 8}, { -5316, 9, 7}, { -5269, 19, 8}, { -5225, 5, 6}, + { -5182, 21, 8}, { -5142, 11, 7}, { -5103, 23, 8}, { -5066, 3, 5}, + { -5031, 25, 8}, { -4997, 13, 7}, { -4964, 27, 8}, { -4932, 7, 6}, + { -4902, 29, 8}, { -4873, 15, 7}, { -4844, 31, 8}, { -4816, 1, 3}, + { -4764, 17, 7}, { -4714, 9, 6}, { -4667, 19, 7}, { -4623, 5, 5}, + { -4580, 21, 7}, { -4540, 11, 6}, { -4501, 23, 7}, { -4464, 3, 4}, + { -4429, 25, 7}, { -4395, 13, 6}, { -4362, 27, 7}, { -4330, 7, 5}, + { -4300, 29, 7}, { -4270, 15, 6}, { -4242, 31, 7}, { -4214, 1, 2}, + { -4162, 17, 6}, { -4112, 9, 5}, { -4065, 19, 6}, { -4021, 5, 4}, + { -3978, 21, 6}, { -3938, 11, 5}, { -3899, 23, 6}, { -3862, 3, 3}, + { -3827, 25, 6}, { -3793, 13, 5}, { -3760, 27, 6}, { -3728, 7, 4}, + { -3698, 29, 6}, { -3668, 15, 5}, { -3640, 31, 6}, { -3612, 1, 1}, + { -3560, 17, 5}, { -3510, 9, 4}, { -3463, 19, 5}, { -3419, 5, 3}, + { -3376, 21, 5}, { -3336, 11, 4}, { -3297, 23, 5}, { -3260, 3, 2}, + { -3225, 25, 5}, { -3191, 13, 4}, { -3158, 27, 5}, { -3126, 7, 3}, + { -3096, 29, 5}, { -3066, 15, 4}, { -3038, 31, 5}, { -3010, 1, 0}, + { -2958, 17, 4}, { -2908, 9, 3}, { -2861, 19, 4}, { -2816, 5, 2}, + { -2774, 21, 4}, { -2734, 11, 3}, { -2695, 23, 4}, { -2658, 3, 1}, + { -2623, 25, 4}, { -2589, 13, 3}, { -2556, 27, 4}, { -2524, 7, 2}, + { -2494, 29, 4}, { -2464, 15, 3}, { -2436, 31, 4}, { -2408, 2, 0}, + { -2356, 17, 3}, { -2306, 9, 2}, { -2259, 19, 3}, { -2214, 5, 1}, + { -2172, 21, 3}, { -2132, 11, 2}, { -2093, 23, 3}, { -2056, 3, 0}, + { -2021, 25, 3}, { -1987, 13, 2}, { -1954, 27, 3}, { -1922, 7, 1}, + { -1892, 29, 3}, { -1862, 15, 2}, { -1834, 31, 3}, { -1806, 4, 0}, + { -1754, 17, 2}, { -1704, 9, 1}, { -1657, 19, 2}, { -1612, 5, 0}, + { -1570, 21, 2}, { -1530, 11, 1}, { -1491, 23, 2}, { -1454, 6, 0}, + { -1419, 25, 2}, { -1384, 13, 1}, { -1352, 27, 2}, { -1320, 7, 0}, + { -1290, 29, 2}, { -1260, 15, 1}, { -1232, 31, 2}, { -1204, 8, 0}, + { -1151, 17, 1}, { -1102, 9, 0}, { -1055, 19, 1}, { -1010, 10, 0}, + { -968, 21, 1}, { -928, 11, 0}, { -889, 23, 1}, { -852, 12, 0}, + { -816, 25, 1}, { -782, 13, 0}, { -750, 27, 1}, { -718, 14, 0}, + { -688, 29, 1}, { -658, 15, 0}, { -630, 31, 1}, { -602, 16, 0}, + { -549, 17, 0}, { -500, 18, 0}, { -453, 19, 0}, { -408, 20, 0}, + { -366, 21, 0}, { -325, 22, 0}, { -287, 23, 0}, { -250, 24, 0}, + { -214, 25, 0}, { -180, 26, 0}, { -148, 27, 0}, { -116, 28, 0}, + { -86, 29, 0}, { -56, 30, 0}, { -28, 31, 0}, { 0, 0, 0}, +}; + +static int pm860x_volatile(unsigned int reg) +{ + BUG_ON(reg >= REG_CACHE_SIZE); + + switch (reg) { + case PM860X_AUDIO_SUPPLIES_2: + return 1; + } + + return 0; +} + +static unsigned int pm860x_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (pm860x_volatile(reg)) + return cache[reg]; + + reg += REG_CACHE_BASE; + + return pm860x_reg_read(codec->control_data, reg); +} + +static int pm860x_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (!pm860x_volatile(reg)) + cache[reg] = (unsigned char)value; + + reg += REG_CACHE_BASE; + + return pm860x_reg_write(codec->control_data, reg, value); +} + +static int snd_soc_get_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int val[2], val2[2], i; + + val[0] = snd_soc_read(codec, reg) & 0x3f; + val[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT) >> 4) & 0xf; + val2[0] = snd_soc_read(codec, reg2) & 0x3f; + val2[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT)) & 0xf; + + for (i = 0; i < ARRAY_SIZE(st_table); i++) { + if ((st_table[i].m == val[0]) && (st_table[i].n == val[1])) + ucontrol->value.integer.value[0] = i; + if ((st_table[i].m == val2[0]) && (st_table[i].n == val2[1])) + ucontrol->value.integer.value[1] = i; + } + return 0; +} + +static int snd_soc_put_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int err; + unsigned int val, val2; + + val = ucontrol->value.integer.value[0]; + val2 = ucontrol->value.integer.value[1]; + + err = snd_soc_update_bits(codec, reg, 0x3f, st_table[val].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0xf0, + st_table[val].n << 4); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, 0x3f, st_table[val2].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0x0f, + st_table[val2].n); + return err; +} + +static int snd_soc_get_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max, val, val2; + unsigned int mask = (1 << fls(max)) - 1; + + val = snd_soc_read(codec, reg) >> shift; + val2 = snd_soc_read(codec, reg2) >> shift; + ucontrol->value.integer.value[0] = (max - val) & mask; + ucontrol->value.integer.value[1] = (max - val2) & mask; + + return 0; +} + +static int snd_soc_put_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max; + unsigned int mask = (1 << fls(max)) - 1; + int err; + unsigned int val, val2, val_mask; + + val_mask = mask << shift; + val = ((max - ucontrol->value.integer.value[0]) & mask); + val2 = ((max - ucontrol->value.integer.value[1]) & mask); + + val = val << shift; + val2 = val2 << shift; + + err = snd_soc_update_bits(codec, reg, val_mask, val); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, val_mask, val2); + return err; +} + +/* DAPM Widget Events */ +/* + * A lot registers are belong to RSYNC domain. It requires enabling RSYNC bit + * after updating these registers. Otherwise, these updated registers won't + * be effective. + */ +static int pm860x_rsync_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + /* + * In order to avoid current on the load, mute power-on and power-off + * should be transients. + * Unmute by DAC_MUTE. It should be unmuted when DAPM sequence is + * finished. + */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, 0); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + unsigned int dac = 0; + int data; + + if (!strcmp(w->name, "Left DAC")) + dac = DAC_LEFT; + if (!strcmp(w->name, "Right DAC")) + dac = DAC_RIGHT; + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (dac) { + /* Auto mute in power-on sequence. */ + dac |= MODULATOR; + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + /* update dac */ + snd_soc_update_bits(codec, PM860X_DAC_EN_2, + dac, dac); + } + break; + case SND_SOC_DAPM_PRE_PMD: + if (dac) { + /* Auto mute in power-off sequence. */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + /* update dac */ + data = snd_soc_read(codec, PM860X_DAC_EN_2); + data &= ~dac; + if (!(data & (DAC_LEFT | DAC_RIGHT))) + data &= ~MODULATOR; + snd_soc_write(codec, PM860X_DAC_EN_2, data); + } + break; + } + return 0; +} + +static const char *pm860x_opamp_texts[] = {"-50%", "-25%", "0%", "75%"}; + +static const char *pm860x_pa_texts[] = {"-33%", "0%", "33%", "66%"}; + +static const struct soc_enum pm860x_hs1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs1_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_hs2_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo1_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo2_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 5, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_ear_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_2, 0, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_ear_opamp_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 3, 4, pm860x_opamp_texts); + +static const struct snd_kcontrol_new pm860x_snd_controls[] = { + SOC_DOUBLE_R_TLV("ADC Capture Volume", PM860X_ADC_ANA_2, + PM860X_ADC_ANA_3, 6, 3, 0, adc_tlv), + SOC_DOUBLE_TLV("AUX Capture Volume", PM860X_ADC_ANA_3, 0, 3, 7, 0, + aux_tlv), + SOC_SINGLE_TLV("MIC1 Capture Volume", PM860X_ADC_ANA_2, 0, 7, 0, + mic_tlv), + SOC_SINGLE_TLV("MIC3 Capture Volume", PM860X_ADC_ANA_2, 3, 7, 0, + mic_tlv), + SOC_DOUBLE_R_EXT_TLV("Sidetone Volume", PM860X_SIDETONE_L_GAIN, + PM860X_SIDETONE_R_GAIN, 0, ARRAY_SIZE(st_table)-1, + 0, snd_soc_get_volsw_2r_st, + snd_soc_put_volsw_2r_st, st_tlv), + SOC_SINGLE_TLV("Speaker Playback Volume", PM860X_EAR_CTRL_1, + 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Line Playback Volume", PM860X_LO1_CTRL, + PM860X_LO2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Headset Playback Volume", PM860X_HS1_CTRL, + PM860X_HS2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Left Playback Volume", + PM860X_HIFIL_GAIN_LEFT, + PM860X_HIFIL_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Right Playback Volume", + PM860X_HIFIR_GAIN_LEFT, + PM860X_HIFIR_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Lofi Playback Volume", PM860X_LOFI_GAIN_LEFT, + PM860X_LOFI_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_ENUM("Headset1 Operational Amplifier Current", + pm860x_hs1_opamp_enum), + SOC_ENUM("Headset2 Operational Amplifier Current", + pm860x_hs2_opamp_enum), + SOC_ENUM("Headset1 Amplifier Current", pm860x_hs1_pa_enum), + SOC_ENUM("Headset2 Amplifier Current", pm860x_hs2_pa_enum), + SOC_ENUM("Lineout1 Operational Amplifier Current", + pm860x_lo1_opamp_enum), + SOC_ENUM("Lineout2 Operational Amplifier Current", + pm860x_lo2_opamp_enum), + SOC_ENUM("Lineout1 Amplifier Current", pm860x_lo1_pa_enum), + SOC_ENUM("Lineout2 Amplifier Current", pm860x_lo2_pa_enum), + SOC_ENUM("Speaker Operational Amplifier Current", + pm860x_spk_ear_opamp_enum), + SOC_ENUM("Speaker Amplifier Current", pm860x_spk_pa_enum), + SOC_ENUM("Earpiece Amplifier Current", pm860x_ear_pa_enum), +}; + +/* + * DAPM Controls + */ + +/* PCM Switch / PCM Interface */ +static const struct snd_kcontrol_new pcm_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ADC_EN_2, 0, 1, 0); + +/* AUX1 Switch */ +static const struct snd_kcontrol_new aux1_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 4, 1, 0); + +/* AUX2 Switch */ +static const struct snd_kcontrol_new aux2_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 5, 1, 0); + +/* Left Ex. PA Switch */ +static const struct snd_kcontrol_new lepa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 2, 1, 0); + +/* Right Ex. PA Switch */ +static const struct snd_kcontrol_new repa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 1, 1, 0); + +/* PCM Mux / Mux7 */ +static const char *aif1_text[] = { + "PCM L", "PCM R", +}; + +static const struct soc_enum aif1_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 6, 2, aif1_text); + +static const struct snd_kcontrol_new aif1_mux = + SOC_DAPM_ENUM("PCM Mux", aif1_enum); + +/* I2S Mux / Mux9 */ +static const char *i2s_din_text[] = { + "DIN", "DIN1", +}; + +static const struct soc_enum i2s_din_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 1, 2, i2s_din_text); + +static const struct snd_kcontrol_new i2s_din_mux = + SOC_DAPM_ENUM("I2S DIN Mux", i2s_din_enum); + +/* I2S Mic Mux / Mux8 */ +static const char *i2s_mic_text[] = { + "Ex PA", "ADC", +}; + +static const struct soc_enum i2s_mic_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 4, 2, i2s_mic_text); + +static const struct snd_kcontrol_new i2s_mic_mux = + SOC_DAPM_ENUM("I2S Mic Mux", i2s_mic_enum); + +/* ADCL Mux / Mux2 */ +static const char *adcl_text[] = { + "ADCR", "ADCL", +}; + +static const struct soc_enum adcl_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 4, 2, adcl_text); + +static const struct snd_kcontrol_new adcl_mux = + SOC_DAPM_ENUM("ADC Left Mux", adcl_enum); + +/* ADCR Mux / Mux3 */ +static const char *adcr_text[] = { + "ADCL", "ADCR", +}; + +static const struct soc_enum adcr_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 2, 2, adcr_text); + +static const struct snd_kcontrol_new adcr_mux = + SOC_DAPM_ENUM("ADC Right Mux", adcr_enum); + +/* ADCR EC Mux / Mux6 */ +static const char *adcr_ec_text[] = { + "ADCR", "EC", +}; + +static const struct soc_enum adcr_ec_enum = + SOC_ENUM_SINGLE(PM860X_ADC_EN_2, 3, 2, adcr_ec_text); + +static const struct snd_kcontrol_new adcr_ec_mux = + SOC_DAPM_ENUM("ADCR EC Mux", adcr_ec_enum); + +/* EC Mux / Mux4 */ +static const char *ec_text[] = { + "Left", "Right", "Left + Right", +}; + +static const struct soc_enum ec_enum = + SOC_ENUM_SINGLE(PM860X_EC_PATH, 1, 3, ec_text); + +static const struct snd_kcontrol_new ec_mux = + SOC_DAPM_ENUM("EC Mux", ec_enum); + +static const char *dac_text[] = { + "No input", "Right", "Left", "No input", +}; + +/* DAC Headset 1 Mux / Mux10 */ +static const struct soc_enum dac_hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs1_mux = + SOC_DAPM_ENUM("DAC HS1 Mux", dac_hs1_enum); + +/* DAC Headset 2 Mux / Mux11 */ +static const struct soc_enum dac_hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 2, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs2_mux = + SOC_DAPM_ENUM("DAC HS2 Mux", dac_hs2_enum); + +/* DAC Lineout 1 Mux / Mux12 */ +static const struct soc_enum dac_lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 4, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo1_mux = + SOC_DAPM_ENUM("DAC LO1 Mux", dac_lo1_enum); + +/* DAC Lineout 2 Mux / Mux13 */ +static const struct soc_enum dac_lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 6, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo2_mux = + SOC_DAPM_ENUM("DAC LO2 Mux", dac_lo2_enum); + +/* DAC Spearker Earphone Mux / Mux14 */ +static const struct soc_enum dac_spk_ear_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_2, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_spk_ear_mux = + SOC_DAPM_ENUM("DAC SP Mux", dac_spk_ear_enum); + +/* Headset 1 Mux / Mux15 */ +static const char *in_text[] = { + "Digital", "Analog", +}; + +static const struct soc_enum hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 0, 2, in_text); + +static const struct snd_kcontrol_new hs1_mux = + SOC_DAPM_ENUM("Headset1 Mux", hs1_enum); + +/* Headset 2 Mux / Mux16 */ +static const struct soc_enum hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 1, 2, in_text); + +static const struct snd_kcontrol_new hs2_mux = + SOC_DAPM_ENUM("Headset2 Mux", hs2_enum); + +/* Lineout 1 Mux / Mux17 */ +static const struct soc_enum lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 2, 2, in_text); + +static const struct snd_kcontrol_new lo1_mux = + SOC_DAPM_ENUM("Lineout1 Mux", lo1_enum); + +/* Lineout 2 Mux / Mux18 */ +static const struct soc_enum lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 3, 2, in_text); + +static const struct snd_kcontrol_new lo2_mux = + SOC_DAPM_ENUM("Lineout2 Mux", lo2_enum); + +/* Speaker Earpiece Demux */ +static const char *spk_text[] = { + "Earpiece", "Speaker", +}; + +static const struct soc_enum spk_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 6, 2, spk_text); + +static const struct snd_kcontrol_new spk_demux = + SOC_DAPM_ENUM("Speaker Earpiece Demux", spk_enum); + +/* MIC Mux / Mux1 */ +static const char *mic_text[] = { + "Mic 1", "Mic 2", +}; + +static const struct soc_enum mic_enum = + SOC_ENUM_SINGLE(PM860X_ADC_ANA_4, 4, 2, mic_text); + +static const struct snd_kcontrol_new mic_mux = + SOC_DAPM_ENUM("MIC Mux", mic_enum); + +static const struct snd_soc_dapm_widget pm860x_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("PCM SDI", "PCM Playback", 0, + PM860X_ADC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("PCM SDO", "PCM Capture", 0, + PM860X_PCM_IFACE_3, 1, 1), + + + SND_SOC_DAPM_AIF_IN("I2S DIN", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_IN("I2S DIN1", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("I2S DOUT", "I2S Capture", 0, + PM860X_I2S_IFACE_3, 5, 1), + SND_SOC_DAPM_MUX("I2S Mic Mux", SND_SOC_NOPM, 0, 0, &i2s_mic_mux), + SND_SOC_DAPM_MUX("ADC Left Mux", SND_SOC_NOPM, 0, 0, &adcl_mux), + SND_SOC_DAPM_MUX("ADC Right Mux", SND_SOC_NOPM, 0, 0, &adcr_mux), + SND_SOC_DAPM_MUX("EC Mux", SND_SOC_NOPM, 0, 0, &ec_mux), + SND_SOC_DAPM_MUX("ADCR EC Mux", SND_SOC_NOPM, 0, 0, &adcr_ec_mux), + SND_SOC_DAPM_SWITCH("Left EPA", SND_SOC_NOPM, 0, 0, + &lepa_switch_controls), + SND_SOC_DAPM_SWITCH("Right EPA", SND_SOC_NOPM, 0, 0, + &repa_switch_controls), + + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "Left ADC MOD", PM860X_ADC_EN_1, + 0, 1, 1, 0), + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "Right ADC MOD", PM860X_ADC_EN_1, + 1, 1, 1, 0), + SND_SOC_DAPM_ADC("Left ADC", NULL, PM860X_ADC_EN_2, 5, 0), + SND_SOC_DAPM_ADC("Right ADC", NULL, PM860X_ADC_EN_2, 4, 0), + + SND_SOC_DAPM_SWITCH("AUX1 Switch", SND_SOC_NOPM, 0, 0, + &aux1_switch_controls), + SND_SOC_DAPM_SWITCH("AUX2 Switch", SND_SOC_NOPM, 0, 0, + &aux2_switch_controls), + + SND_SOC_DAPM_MUX("MIC Mux", SND_SOC_NOPM, 0, 0, &mic_mux), + SND_SOC_DAPM_MICBIAS("Mic1 Bias", PM860X_ADC_ANA_1, 2, 0), + SND_SOC_DAPM_MICBIAS("Mic3 Bias", PM860X_ADC_ANA_1, 7, 0), + SND_SOC_DAPM_PGA("MIC1 Volume", PM860X_ADC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("MIC3 Volume", PM860X_ADC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX1 Volume", PM860X_ADC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX2 Volume", PM860X_ADC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("Sidetone PGA", PM860X_ADC_EN_2, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lofi PGA", PM860X_ADC_EN_2, 2, 0, NULL, 0), + + SND_SOC_DAPM_INPUT("AUX1"), + SND_SOC_DAPM_INPUT("AUX2"), + SND_SOC_DAPM_INPUT("MIC1P"), + SND_SOC_DAPM_INPUT("MIC1N"), + SND_SOC_DAPM_INPUT("MIC2P"), + SND_SOC_DAPM_INPUT("MIC2N"), + SND_SOC_DAPM_INPUT("MIC3P"), + SND_SOC_DAPM_INPUT("MIC3N"), + + SND_SOC_DAPM_DAC_E("Left DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_DAC_E("Right DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_MUX("I2S DIN Mux", SND_SOC_NOPM, 0, 0, &i2s_din_mux), + SND_SOC_DAPM_MUX("DAC HS1 Mux", SND_SOC_NOPM, 0, 0, &dac_hs1_mux), + SND_SOC_DAPM_MUX("DAC HS2 Mux", SND_SOC_NOPM, 0, 0, &dac_hs2_mux), + SND_SOC_DAPM_MUX("DAC LO1 Mux", SND_SOC_NOPM, 0, 0, &dac_lo1_mux), + SND_SOC_DAPM_MUX("DAC LO2 Mux", SND_SOC_NOPM, 0, 0, &dac_lo2_mux), + SND_SOC_DAPM_MUX("DAC SP Mux", SND_SOC_NOPM, 0, 0, &dac_spk_ear_mux), + SND_SOC_DAPM_MUX("Headset1 Mux", SND_SOC_NOPM, 0, 0, &hs1_mux), + SND_SOC_DAPM_MUX("Headset2 Mux", SND_SOC_NOPM, 0, 0, &hs2_mux), + SND_SOC_DAPM_MUX("Lineout1 Mux", SND_SOC_NOPM, 0, 0, &lo1_mux), + SND_SOC_DAPM_MUX("Lineout2 Mux", SND_SOC_NOPM, 0, 0, &lo2_mux), + SND_SOC_DAPM_MUX("Speaker Earpiece Demux", SND_SOC_NOPM, 0, 0, + &spk_demux), + + + SND_SOC_DAPM_PGA("Headset1 PGA", PM860X_DAC_EN_1, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Headset2 PGA", PM860X_DAC_EN_1, 1, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("HS1"), + SND_SOC_DAPM_OUTPUT("HS2"), + SND_SOC_DAPM_PGA("Lineout1 PGA", PM860X_DAC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lineout2 PGA", PM860X_DAC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LINEOUT1"), + SND_SOC_DAPM_OUTPUT("LINEOUT2"), + SND_SOC_DAPM_PGA("Earpiece PGA", PM860X_DAC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("EARP"), + SND_SOC_DAPM_OUTPUT("EARN"), + SND_SOC_DAPM_PGA("Speaker PGA", PM860X_DAC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LSP"), + SND_SOC_DAPM_OUTPUT("LSN"), + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "VCODEC", PM860X_AUDIO_SUPPLIES_2, + 0, SUPPLY_MASK, SUPPLY_MASK, 0), + + PM860X_DAPM_OUTPUT("RSYNC", pm860x_rsync_event), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* supply */ + {"Left DAC", NULL, "VCODEC"}, + {"Right DAC", NULL, "VCODEC"}, + {"Left ADC", NULL, "VCODEC"}, + {"Right ADC", NULL, "VCODEC"}, + {"Left ADC", NULL, "Left ADC MOD"}, + {"Right ADC", NULL, "Right ADC MOD"}, + + /* PCM/AIF1 Inputs */ + {"PCM SDO", NULL, "ADC Left Mux"}, + {"PCM SDO", NULL, "ADCR EC Mux"}, + + /* PCM/AFI2 Outputs */ + {"Lofi PGA", NULL, "PCM SDI"}, + {"Lofi PGA", NULL, "Sidetone PGA"}, + {"Left DAC", NULL, "Lofi PGA"}, + {"Right DAC", NULL, "Lofi PGA"}, + + /* I2S/AIF2 Inputs */ + {"MIC Mux", "Mic 1", "MIC1P"}, + {"MIC Mux", "Mic 1", "MIC1N"}, + {"MIC Mux", "Mic 2", "MIC2P"}, + {"MIC Mux", "Mic 2", "MIC2N"}, + {"MIC1 Volume", NULL, "MIC Mux"}, + {"MIC3 Volume", NULL, "MIC3P"}, + {"MIC3 Volume", NULL, "MIC3N"}, + {"Left ADC", NULL, "MIC1 Volume"}, + {"Right ADC", NULL, "MIC3 Volume"}, + {"ADC Left Mux", "ADCR", "Right ADC"}, + {"ADC Left Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCR", "Right ADC"}, + {"Left EPA", "Switch", "Left DAC"}, + {"Right EPA", "Switch", "Right DAC"}, + {"EC Mux", "Left", "Left DAC"}, + {"EC Mux", "Right", "Right DAC"}, + {"EC Mux", "Left + Right", "Left DAC"}, + {"EC Mux", "Left + Right", "Right DAC"}, + {"ADCR EC Mux", "ADCR", "ADC Right Mux"}, + {"ADCR EC Mux", "EC", "EC Mux"}, + {"I2S Mic Mux", "Ex PA", "Left EPA"}, + {"I2S Mic Mux", "Ex PA", "Right EPA"}, + {"I2S Mic Mux", "ADC", "ADC Left Mux"}, + {"I2S Mic Mux", "ADC", "ADCR EC Mux"}, + {"I2S DOUT", NULL, "I2S Mic Mux"}, + + /* I2S/AIF2 Outputs */ + {"I2S DIN Mux", "DIN", "I2S DIN"}, + {"I2S DIN Mux", "DIN1", "I2S DIN1"}, + {"Left DAC", NULL, "I2S DIN Mux"}, + {"Right DAC", NULL, "I2S DIN Mux"}, + {"DAC HS1 Mux", "Left", "Left DAC"}, + {"DAC HS1 Mux", "Right", "Right DAC"}, + {"DAC HS2 Mux", "Left", "Left DAC"}, + {"DAC HS2 Mux", "Right", "Right DAC"}, + {"DAC LO1 Mux", "Left", "Left DAC"}, + {"DAC LO1 Mux", "Right", "Right DAC"}, + {"DAC LO2 Mux", "Left", "Left DAC"}, + {"DAC LO2 Mux", "Right", "Right DAC"}, + {"Headset1 Mux", "Digital", "DAC HS1 Mux"}, + {"Headset2 Mux", "Digital", "DAC HS2 Mux"}, + {"Lineout1 Mux", "Digital", "DAC LO1 Mux"}, + {"Lineout2 Mux", "Digital", "DAC LO2 Mux"}, + {"Headset1 PGA", NULL, "Headset1 Mux"}, + {"Headset2 PGA", NULL, "Headset2 Mux"}, + {"Lineout1 PGA", NULL, "Lineout1 Mux"}, + {"Lineout2 PGA", NULL, "Lineout2 Mux"}, + {"DAC SP Mux", "Left", "Left DAC"}, + {"DAC SP Mux", "Right", "Right DAC"}, + {"Speaker Earpiece Demux", "Speaker", "DAC SP Mux"}, + {"Speaker PGA", NULL, "Speaker Earpiece Demux"}, + {"Earpiece PGA", NULL, "Speaker Earpiece Demux"}, + + {"RSYNC", NULL, "Headset1 PGA"}, + {"RSYNC", NULL, "Headset2 PGA"}, + {"RSYNC", NULL, "Lineout1 PGA"}, + {"RSYNC", NULL, "Lineout2 PGA"}, + {"RSYNC", NULL, "Speaker PGA"}, + {"RSYNC", NULL, "Speaker PGA"}, + {"RSYNC", NULL, "Earpiece PGA"}, + {"RSYNC", NULL, "Earpiece PGA"}, + + {"HS1", NULL, "RSYNC"}, + {"HS2", NULL, "RSYNC"}, + {"LINEOUT1", NULL, "RSYNC"}, + {"LINEOUT2", NULL, "RSYNC"}, + {"LSP", NULL, "RSYNC"}, + {"LSN", NULL, "RSYNC"}, + {"EARP", NULL, "RSYNC"}, + {"EARN", NULL, "RSYNC"}, +}; + +/* + * Use MUTE_LEFT & MUTE_RIGHT to implement digital mute. + * These bits can also be used to mute. + */ +static int pm860x_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int data = 0, mask = MUTE_LEFT | MUTE_RIGHT; + + if (mute) + data = mask; + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, mask, data); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf = 0, mask = 0; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf &= ~PCM_INF2_18WL; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf |= PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + mask |= PCM_INF2_18WL; + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 16000: + inf = 3; + break; + case 32000: + inf = 6; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_PCM_RATE, 0x0f, inf); + + return 0; +} + +static int pm860x_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int ret = -EINVAL; + + mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + if (pm860x->dir == PM860X_CLK_DIR_OUT) { + inf |= PCM_INF2_MASTER; + ret = 0; + } + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) { + inf &= ~PCM_INF2_MASTER; + ret = 0; + } + break; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + inf |= PCM_EXACT_I2S; + ret = 0; + break; + } + mask |= PCM_MODE_MASK; + if (ret) + return ret; + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + return 0; +} + +static int pm860x_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + if (dir == PM860X_CLK_DIR_OUT) + pm860x->dir = PM860X_CLK_DIR_OUT; + else { + pm860x->dir = PM860X_CLK_DIR_IN; + return -EINVAL; + } + + return 0; +} + +static int pm860x_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf = 0; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf = PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, PCM_INF2_18WL, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 11025: + inf = 1; + break; + case 16000: + inf = 3; + break; + case 22050: + inf = 4; + break; + case 32000: + inf = 6; + break; + case 44100: + inf = 7; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_4, 0xf, inf); + + return 0; +} + +static int pm860x_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + + mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + if (pm860x->dir == PM860X_CLK_DIR_OUT) + inf |= PCM_INF2_MASTER; + else + return -EINVAL; + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) + inf &= ~PCM_INF2_MASTER; + else + return -EINVAL; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + inf |= PCM_EXACT_I2S; + break; + default: + return -EINVAL; + } + mask |= PCM_MODE_MASK; + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, mask, inf); + return 0; +} + +static int pm860x_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int data; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Enable Audio PLL & Audio section */ + data = AUDIO_PLL | AUDIO_SECTION_RESET + | AUDIO_SECTION_ON; + pm860x_reg_write(codec->control_data, REG_MISC2, data); + } + break; + + case SND_SOC_BIAS_OFF: + data = AUDIO_PLL | AUDIO_SECTION_RESET | AUDIO_SECTION_ON; + pm860x_set_bits(codec->control_data, REG_MISC2, data, 0); + break; + } + codec->bias_level = level; + return 0; +} + +static struct snd_soc_dai_ops pm860x_pcm_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_pcm_hw_params, + .set_fmt = pm860x_pcm_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops pm860x_i2s_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_i2s_hw_params, + .set_fmt = pm860x_i2s_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +#define PM860X_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000) + +static struct snd_soc_dai_driver pm860x_dai[] = { + { + /* DAI PCM */ + .name = "88pm860x-pcm", + .id = 1, + .playback = { + .stream_name = "PCM Playback", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "PCM Capture", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_pcm_dai_ops, + }, { + /* DAI I2S */ + .name = "88pm860x-i2s", + .id = 2, + .playback = { + .stream_name = "I2S Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "I2S Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_i2s_dai_ops, + }, +}; + +static irqreturn_t pm860x_codec_handler(int irq, void *data) +{ + struct pm860x_priv *pm860x = data; + int status, shrt, report = 0, mic_report = 0; + int mask; + + status = pm860x_reg_read(pm860x->i2c, REG_STATUS_1); + shrt = pm860x_reg_read(pm860x->i2c, REG_SHORTS); + mask = pm860x->det.hs_shrt | pm860x->det.hook_det | pm860x->det.lo_shrt + | pm860x->det.hp_det; + + if ((pm860x->det.hp_det & SND_JACK_HEADPHONE) + && (status & HEADSET_STATUS)) + report |= SND_JACK_HEADPHONE; + + if ((pm860x->det.mic_det & SND_JACK_MICROPHONE) + && (status & MIC_STATUS)) + mic_report |= SND_JACK_MICROPHONE; + + if (pm860x->det.hs_shrt && (shrt & (SHORT_HS1 | SHORT_HS2))) + report |= pm860x->det.hs_shrt; + + if (pm860x->det.hook_det && (status & HOOK_STATUS)) + report |= pm860x->det.hook_det; + + if (pm860x->det.lo_shrt && (shrt & (SHORT_LO1 | SHORT_LO2))) + report |= pm860x->det.lo_shrt; + + if (report) + snd_soc_jack_report(pm860x->det.hp_jack, report, mask); + if (mic_report) + snd_soc_jack_report(pm860x->det.mic_jack, SND_JACK_MICROPHONE, + SND_JACK_MICROPHONE); + + dev_dbg(pm860x->codec->dev, "headphone report:0x%x, mask:%x\n", + report, mask); + dev_dbg(pm860x->codec->dev, "microphone report:0x%x\n", mic_report); + return IRQ_HANDLED; +} + +int pm860x_hs_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack, + int det, int hook, int hs_shrt, int lo_shrt) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int data; + + pm860x->det.hp_jack = jack; + pm860x->det.hp_det = det; + pm860x->det.hook_det = hook; + pm860x->det.hs_shrt = hs_shrt; + pm860x->det.lo_shrt = lo_shrt; + + if (det & SND_JACK_HEADPHONE) + pm860x_set_bits(codec->control_data, REG_HS_DET, + EN_HS_DET, EN_HS_DET); + /* headset short detect */ + if (hs_shrt) { + data = CLR_SHORT_HS2 | CLR_SHORT_HS1; + pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + } + /* Lineout short detect */ + if (lo_shrt) { + data = CLR_SHORT_LO2 | CLR_SHORT_LO1; + pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + } + + /* sync status */ + pm860x_codec_handler(0, pm860x); + return 0; +} +EXPORT_SYMBOL_GPL(pm860x_hs_jack_detect); + +int pm860x_mic_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack, int det) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + pm860x->det.mic_jack = jack; + pm860x->det.mic_det = det; + + if (det & SND_JACK_MICROPHONE) + pm860x_set_bits(codec->control_data, REG_MIC_DET, + MICDET_MASK, MICDET_MASK); + + /* sync status */ + pm860x_codec_handler(0, pm860x); + return 0; +} +EXPORT_SYMBOL_GPL(pm860x_mic_jack_detect); + +static int pm860x_probe(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i, ret; + + pm860x->codec = codec; + + codec->control_data = pm860x->i2c; + + for (i = 0; i < 4; i++) { + ret = request_threaded_irq(pm860x->irq[i], NULL, + pm860x_codec_handler, IRQF_ONESHOT, + pm860x->name[i], pm860x); + if (ret < 0) { + dev_err(codec->dev, "Failed to request IRQ!\n"); + goto out_irq; + } + } + + pm860x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + ret = pm860x_bulk_read(codec->control_data, REG_CACHE_BASE, + REG_CACHE_SIZE, codec->reg_cache); + if (ret < 0) { + dev_err(codec->dev, "Failed to fill register cache: %d\n", + ret); + goto out_codec; + } + + snd_soc_add_controls(codec, pm860x_snd_controls, + ARRAY_SIZE(pm860x_snd_controls)); + snd_soc_dapm_new_controls(codec, pm860x_dapm_widgets, + ARRAY_SIZE(pm860x_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + return 0; + +out_codec: + i = 3; +out_irq: + for (; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + return -EINVAL; +} + +static int pm860x_remove(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i; + + for (i = 3; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + pm860x_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_pm860x = { + .probe = pm860x_probe, + .remove = pm860x_remove, + .read = pm860x_read_reg_cache, + .write = pm860x_write_reg_cache, + .reg_cache_size = REG_CACHE_SIZE, + .reg_word_size = sizeof(u8), + .set_bias_level = pm860x_set_bias_level, +}; + +static int __devinit pm860x_codec_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_priv *pm860x; + struct resource *res; + int i, ret; + + pm860x = kzalloc(sizeof(struct pm860x_priv), GFP_KERNEL); + if (pm860x == NULL) + return -ENOMEM; + + pm860x->chip = chip; + pm860x->i2c = (chip->id == CHIP_PM8607) ? chip->client + : chip->companion; + platform_set_drvdata(pdev, pm860x); + + for (i = 0; i < 4; i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + if (!res) { + dev_err(&pdev->dev, "Failed to get IRQ resources\n"); + goto out; + } + pm860x->irq[i] = res->start + chip->irq_base; + strncpy(pm860x->name[i], res->name, MAX_NAME_LEN); + } + + ret = snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pm860x, + pm860x_dai, ARRAY_SIZE(pm860x_dai)); + if (ret) { + dev_err(&pdev->dev, "Failed to register codec\n"); + goto out; + } + return ret; + +out: + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return -EINVAL; +} + +static int __devexit pm860x_codec_remove(struct platform_device *pdev) +{ + struct pm860x_priv *pm860x = platform_get_drvdata(pdev); + + snd_soc_unregister_codec(&pdev->dev); + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return 0; +} + +static struct platform_driver pm860x_codec_driver = { + .driver = { + .name = "88pm860x-codec", + .owner = THIS_MODULE, + }, + .probe = pm860x_codec_probe, + .remove = __devexit_p(pm860x_codec_remove), +}; + +static __init int pm860x_init(void) +{ + return platform_driver_register(&pm860x_codec_driver); +} +module_init(pm860x_init); + +static __exit void pm860x_exit(void) +{ + platform_driver_unregister(&pm860x_codec_driver); +} +module_exit(pm860x_exit); + +MODULE_DESCRIPTION("ASoC 88PM860x driver"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-codec"); + diff --git a/sound/soc/codecs/88pm860x-codec.h b/sound/soc/codecs/88pm860x-codec.h new file mode 100644 index 0000000..3364ba4 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.h @@ -0,0 +1,97 @@ +/* + * 88pm860x-codec.h -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __88PM860X_H +#define __88PM860X_H + +/* The offset of these registers are 0xb0 */ +#define PM860X_PCM_IFACE_1 0x00 +#define PM860X_PCM_IFACE_2 0x01 +#define PM860X_PCM_IFACE_3 0x02 +#define PM860X_PCM_RATE 0x03 +#define PM860X_EC_PATH 0x04 +#define PM860X_SIDETONE_L_GAIN 0x05 +#define PM860X_SIDETONE_R_GAIN 0x06 +#define PM860X_SIDETONE_SHIFT 0x07 +#define PM860X_ADC_OFFSET_1 0x08 +#define PM860X_ADC_OFFSET_2 0x09 +#define PM860X_DMIC_DELAY 0x0a + +#define PM860X_I2S_IFACE_1 0x0b +#define PM860X_I2S_IFACE_2 0x0c +#define PM860X_I2S_IFACE_3 0x0d +#define PM860X_I2S_IFACE_4 0x0e +#define PM860X_EQUALIZER_N0_1 0x0f +#define PM860X_EQUALIZER_N0_2 0x10 +#define PM860X_EQUALIZER_N1_1 0x11 +#define PM860X_EQUALIZER_N1_2 0x12 +#define PM860X_EQUALIZER_D1_1 0x13 +#define PM860X_EQUALIZER_D1_2 0x14 +#define PM860X_LOFI_GAIN_LEFT 0x15 +#define PM860X_LOFI_GAIN_RIGHT 0x16 +#define PM860X_HIFIL_GAIN_LEFT 0x17 +#define PM860X_HIFIL_GAIN_RIGHT 0x18 +#define PM860X_HIFIR_GAIN_LEFT 0x19 +#define PM860X_HIFIR_GAIN_RIGHT 0x1a +#define PM860X_DAC_OFFSET 0x1b +#define PM860X_OFFSET_LEFT_1 0x1c +#define PM860X_OFFSET_LEFT_2 0x1d +#define PM860X_OFFSET_RIGHT_1 0x1e +#define PM860X_OFFSET_RIGHT_2 0x1f +#define PM860X_ADC_ANA_1 0x20 +#define PM860X_ADC_ANA_2 0x21 +#define PM860X_ADC_ANA_3 0x22 +#define PM860X_ADC_ANA_4 0x23 +#define PM860X_ANA_TO_ANA 0x24 +#define PM860X_HS1_CTRL 0x25 +#define PM860X_HS2_CTRL 0x26 +#define PM860X_LO1_CTRL 0x27 +#define PM860X_LO2_CTRL 0x28 +#define PM860X_EAR_CTRL_1 0x29 +#define PM860X_EAR_CTRL_2 0x2a +#define PM860X_AUDIO_SUPPLIES_1 0x2b +#define PM860X_AUDIO_SUPPLIES_2 0x2c +#define PM860X_ADC_EN_1 0x2d +#define PM860X_ADC_EN_2 0x2e +#define PM860X_DAC_EN_1 0x2f +#define PM860X_DAC_EN_2 0x31 +#define PM860X_AUDIO_CAL_1 0x32 +#define PM860X_AUDIO_CAL_2 0x33 +#define PM860X_AUDIO_CAL_3 0x34 +#define PM860X_AUDIO_CAL_4 0x35 +#define PM860X_AUDIO_CAL_5 0x36 +#define PM860X_ANA_INPUT_SEL_1 0x37 +#define PM860X_ANA_INPUT_SEL_2 0x38 + +#define PM860X_PCM_IFACE_4 0x39 +#define PM860X_I2S_IFACE_5 0x3a + +#define PM860X_SHORTS 0x3b +#define PM860X_PLL_ADJ_1 0x3c +#define PM860X_PLL_ADJ_2 0x3d + +/* bits definition */ +#define PM860X_CLK_DIR_IN 0 +#define PM860X_CLK_DIR_OUT 1 + +#define PM860X_DET_HEADSET (1 << 0) +#define PM860X_DET_MIC (1 << 1) +#define PM860X_DET_HOOK (1 << 2) +#define PM860X_SHORT_HEADSET (1 << 3) +#define PM860X_SHORT_LINEOUT (1 << 4) +#define PM860X_DET_MASK 0x1F + +extern int pm860x_hs_jack_detect(struct snd_soc_codec *, struct snd_soc_jack *, + int, int, int, int); +extern int pm860x_mic_jack_detect(struct snd_soc_codec *, struct snd_soc_jack *, + int); + +#endif /* __88PM860X_H */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index bfdd92b..a3cfc18 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -10,6 +10,7 @@ config SND_SOC_I2C_AND_SPI config SND_SOC_ALL_CODECS tristate "Build all ASoC CODEC drivers" + select SND_SOC_88PM860X if MFD_88PM860X select SND_SOC_L3 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS select SND_SOC_AD1836 if SPI_MASTER @@ -85,6 +86,9 @@ config SND_SOC_ALL_CODECS If unsure select "N". +config SND_SOC_88PM860X + tristate + config SND_SOC_WM_HUBS tristate default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 9c3c39f..b9c4358 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,3 +1,4 @@ +snd-soc-88pm860x-objs := 88pm860x-codec.o snd-soc-ac97-objs := ac97.o snd-soc-ad1836-objs := ad1836.o snd-soc-ad193x-objs := ad193x.o @@ -67,6 +68,7 @@ snd-soc-tpa6130a2-objs := tpa6130a2.o snd-soc-wm2000-objs := wm2000.o snd-soc-wm9090-objs := wm9090.o +obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o -- 1.5.6.5

1 0

[PATCH 1/3] ASoC: add 88pm860x codec driver
by Haojian Zhuang 12 Aug '10

12 Aug '10

Add 88PM860x codec driver. 88PM860x codec supports two interfaces. And it also supports headset/mic/hook/short detection. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/codecs/88pm860x-codec.c | 1486 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/88pm860x-codec.h | 97 +++ sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + 4 files changed, 1589 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/88pm860x-codec.c create mode 100644 sound/soc/codecs/88pm860x-codec.h diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c new file mode 100644 index 0000000..01d19e9 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.c @@ -0,0 +1,1486 @@ +/* + * 88pm860x-codec.c -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Author: Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/mfd/88pm860x.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> +#include <sound/jack.h> + +#include "88pm860x-codec.h" + +#define MAX_NAME_LEN 20 +#define REG_CACHE_SIZE 0x40 +#define REG_CACHE_BASE 0xb0 + +/* Status Register 1 (0x01) */ +#define REG_STATUS_1 0x01 +#define MIC_STATUS (1 << 7) +#define HOOK_STATUS (1 << 6) +#define HEADSET_STATUS (1 << 5) + +/* Mic Detection Register (0x37) */ +#define REG_MIC_DET 0x37 +#define CONTINUOUS_POLLING (3 << 1) +#define EN_MIC_DET (1 << 0) +#define MICDET_MASK 0x07 + +/* Headset Detection Register (0x38) */ +#define REG_HS_DET 0x38 +#define EN_HS_DET (1 << 0) + +/* Misc2 Register (0x42) */ +#define REG_MISC2 0x42 +#define AUDIO_PLL (1 << 5) +#define AUDIO_SECTION_RESET (1 << 4) +#define AUDIO_SECTION_ON (1 << 3) + +/* PCM Interface Register 2 (0xb1) */ +#define PCM_INF2_BCLK (1 << 6) /* Bit clock polarity */ +#define PCM_INF2_FS (1 << 5) /* Frame Sync polarity */ +#define PCM_INF2_MASTER (1 << 4) /* Master / Slave */ +#define PCM_INF2_18WL (1 << 3) /* 18 / 16 bits */ +#define PCM_GENERAL_I2S 0 +#define PCM_EXACT_I2S 1 +#define PCM_LEFT_I2S 2 +#define PCM_RIGHT_I2S 3 +#define PCM_SHORT_FS 4 +#define PCM_LONG_FS 5 +#define PCM_MODE_MASK 7 + +/* I2S Interface Register 4 (0xbe) */ +#define I2S_EQU_BYP (1 << 6) + +/* DAC Offset Register (0xcb) */ +#define DAC_MUTE (1 << 7) +#define MUTE_LEFT (1 << 6) +#define MUTE_RIGHT (1 << 2) + +/* ADC Analog Register 1 (0xd0) */ +#define REG_ADC_ANA_1 0xd0 +#define MIC1BIAS_MASK 0x60 + +/* Earpiece/Speaker Control Register 2 (0xda) */ +#define REG_EAR2 0xda +#define RSYNC_CHANGE (1 << 2) + +/* Audio Supplies Register 2 (0xdc) */ +#define REG_SUPPLIES2 0xdc +#define LDO15_READY (1 << 4) +#define LDO15_EN (1 << 3) +#define CPUMP_READY (1 << 2) +#define CPUMP_EN (1 << 1) +#define AUDIO_EN (1 << 0) +#define SUPPLY_MASK (LDO15_EN | CPUMP_EN | AUDIO_EN) + +/* Audio Enable Register 1 (0xdd) */ +#define ADC_MOD_RIGHT (1 << 1) +#define ADC_MOD_LEFT (1 << 0) + +/* Audio Enable Register 2 (0xde) */ +#define ADC_LEFT (1 << 5) +#define ADC_RIGHT (1 << 4) + +/* DAC Enable Register 2 (0xe1) */ +#define DAC_LEFT (1 << 5) +#define DAC_RIGHT (1 << 4) +#define MODULATOR (1 << 3) + +/* Shorts Register (0xeb) */ +#define REG_SHORTS 0xeb +#define CLR_SHORT_LO2 (1 << 7) +#define SHORT_LO2 (1 << 6) +#define CLR_SHORT_LO1 (1 << 5) +#define SHORT_LO1 (1 << 4) +#define CLR_SHORT_HS2 (1 << 3) +#define SHORT_HS2 (1 << 2) +#define CLR_SHORT_HS1 (1 << 1) +#define SHORT_HS1 (1 << 0) + +/* + * This widget should be just after DAC & PGA in DAPM power-on sequence and + * before DAC & PGA in DAPM power-off sequence. + */ +#define PM860X_DAPM_OUTPUT(wname, wevent) \ +{ .id = snd_soc_dapm_pga, .name = wname, .reg = SND_SOC_NOPM, \ + .shift = 0, .invert = 0, .kcontrols = NULL, \ + .num_kcontrols = 0, .event = wevent, \ + .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD, } + +struct pm860x_det { + struct snd_soc_jack *hp_jack; + struct snd_soc_jack *mic_jack; + int hp_det; + int mic_det; + int hook_det; + int hs_shrt; + int lo_shrt; +}; + +struct pm860x_priv { + unsigned int sysclk; + unsigned int pcmclk; + unsigned int dir; + unsigned int filter; + struct snd_soc_codec *codec; + struct i2c_client *i2c; + struct pm860x_chip *chip; + struct pm860x_det det; + + int irq[4]; + unsigned char name[4][MAX_NAME_LEN]; + unsigned char reg_cache[REG_CACHE_SIZE]; +}; + +/* -9450dB to 0dB in 150dB steps ( mute instead of -9450dB) */ +static const DECLARE_TLV_DB_SCALE(dpga_tlv, -9450, 150, 1); + +/* -9dB to 0db in 3dB steps */ +static const DECLARE_TLV_DB_SCALE(adc_tlv, -900, 300, 0); + +/* {-23, -17, -13.5, -11, -9, -6, -3, 0}dB */ +static const unsigned int mic_tlv[] = { + TLV_DB_RANGE_HEAD(5), + 0, 0, TLV_DB_SCALE_ITEM(-2300, 0, 0), + 1, 1, TLV_DB_SCALE_ITEM(-1700, 0, 0), + 2, 2, TLV_DB_SCALE_ITEM(-1350, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(-1100, 0, 0), + 4, 7, TLV_DB_SCALE_ITEM(-900, 300, 0), +}; + +/* {0, 0, 0, -6, 0, 6, 12, 18}dB */ +static const unsigned int aux_tlv[] = { + TLV_DB_RANGE_HEAD(2), + 0, 2, TLV_DB_SCALE_ITEM(0, 0, 0), + 3, 7, TLV_DB_SCALE_ITEM(-600, 600, 0), +}; + +/* {-16, -13, -10, -7, -5.2, -3,3, -2.2, 0}dB, mute instead of -16dB */ +static const unsigned int out_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 3, TLV_DB_SCALE_ITEM(-1600, 300, 1), + 4, 4, TLV_DB_SCALE_ITEM(-520, 0, 0), + 5, 5, TLV_DB_SCALE_ITEM(-330, 0, 0), + 6, 7, TLV_DB_SCALE_ITEM(-220, 220, 0), +}; + +static const unsigned int st_tlv[] = { + TLV_DB_RANGE_HEAD(8), + 0, 1, TLV_DB_SCALE_ITEM(-12041, 602, 0), + 2, 3, TLV_DB_SCALE_ITEM(-11087, 250, 0), + 4, 5, TLV_DB_SCALE_ITEM(-10643, 158, 0), + 6, 7, TLV_DB_SCALE_ITEM(-10351, 116, 0), + 8, 9, TLV_DB_SCALE_ITEM(-10133, 92, 0), + 10, 13, TLV_DB_SCALE_ITEM(-9958, 70, 0), + 14, 17, TLV_DB_SCALE_ITEM(-9689, 53, 0), + 18, 271, TLV_DB_SCALE_ITEM(-9484, 37, 0), +}; + +/* Sidetone Gain = M * 2^(-5-N) */ +struct st_gain { + unsigned int db; + unsigned int m; + unsigned int n; +}; + +static struct st_gain st_table[] = { + {-12041, 1, 15}, {-11439, 1, 14}, {-11087, 3, 15}, {-10837, 1, 13}, + {-10643, 5, 15}, {-10485, 3, 14}, {-10351, 7, 15}, {-10235, 1, 12}, + {-10133, 9, 15}, {-10041, 5, 14}, { -9958, 11, 15}, { -9883, 3, 13}, + { -9813, 13, 15}, { -9749, 7, 14}, { -9689, 15, 15}, { -9633, 1, 11}, + { -9580, 17, 15}, { -9531, 9, 14}, { -9484, 19, 15}, { -9439, 5, 13}, + { -9397, 21, 15}, { -9356, 11, 14}, { -9318, 23, 15}, { -9281, 3, 12}, + { -9245, 25, 15}, { -9211, 13, 14}, { -9178, 27, 15}, { -9147, 7, 13}, + { -9116, 29, 15}, { -9087, 15, 14}, { -9058, 31, 15}, { -9031, 1, 10}, + { -8978, 17, 14}, { -8929, 9, 13}, { -8882, 19, 14}, { -8837, 5, 12}, + { -8795, 21, 14}, { -8754, 11, 13}, { -8716, 23, 14}, { -8679, 3, 11}, + { -8643, 25, 14}, { -8609, 13, 13}, { -8576, 27, 14}, { -8545, 7, 12}, + { -8514, 29, 14}, { -8485, 15, 13}, { -8456, 31, 14}, { -8429, 1, 9}, + { -8376, 17, 13}, { -8327, 9, 12}, { -8280, 19, 13}, { -8235, 5, 11}, + { -8193, 21, 13}, { -8152, 11, 12}, { -8114, 23, 13}, { -8077, 3, 10}, + { -8041, 25, 13}, { -8007, 13, 12}, { -7974, 27, 13}, { -7943, 7, 11}, + { -7912, 29, 13}, { -7883, 15, 12}, { -7854, 31, 13}, { -7827, 1, 8}, + { -7774, 17, 12}, { -7724, 9, 11}, { -7678, 19, 12}, { -7633, 5, 10}, + { -7591, 21, 12}, { -7550, 11, 11}, { -7512, 23, 12}, { -7475, 3, 9}, + { -7439, 25, 12}, { -7405, 13, 11}, { -7372, 27, 12}, { -7341, 7, 10}, + { -7310, 29, 12}, { -7281, 15, 11}, { -7252, 31, 12}, { -7225, 1, 7}, + { -7172, 17, 11}, { -7122, 9, 10}, { -7075, 19, 11}, { -7031, 5, 9}, + { -6989, 21, 11}, { -6948, 11, 10}, { -6910, 23, 11}, { -6873, 3, 8}, + { -6837, 25, 11}, { -6803, 13, 10}, { -6770, 27, 11}, { -6739, 7, 9}, + { -6708, 29, 11}, { -6679, 15, 10}, { -6650, 31, 11}, { -6623, 1, 6}, + { -6570, 17, 10}, { -6520, 9, 9}, { -6473, 19, 10}, { -6429, 5, 8}, + { -6386, 21, 10}, { -6346, 11, 9}, { -6307, 23, 10}, { -6270, 3, 7}, + { -6235, 25, 10}, { -6201, 13, 9}, { -6168, 27, 10}, { -6137, 7, 8}, + { -6106, 29, 10}, { -6077, 15, 9}, { -6048, 31, 10}, { -6021, 1, 5}, + { -5968, 17, 9}, { -5918, 9, 8}, { -5871, 19, 9}, { -5827, 5, 7}, + { -5784, 21, 9}, { -5744, 11, 8}, { -5705, 23, 9}, { -5668, 3, 6}, + { -5633, 25, 9}, { -5599, 13, 8}, { -5566, 27, 9}, { -5535, 7, 7}, + { -5504, 29, 9}, { -5475, 15, 8}, { -5446, 31, 9}, { -5419, 1, 4}, + { -5366, 17, 8}, { -5316, 9, 7}, { -5269, 19, 8}, { -5225, 5, 6}, + { -5182, 21, 8}, { -5142, 11, 7}, { -5103, 23, 8}, { -5066, 3, 5}, + { -5031, 25, 8}, { -4997, 13, 7}, { -4964, 27, 8}, { -4932, 7, 6}, + { -4902, 29, 8}, { -4873, 15, 7}, { -4844, 31, 8}, { -4816, 1, 3}, + { -4764, 17, 7}, { -4714, 9, 6}, { -4667, 19, 7}, { -4623, 5, 5}, + { -4580, 21, 7}, { -4540, 11, 6}, { -4501, 23, 7}, { -4464, 3, 4}, + { -4429, 25, 7}, { -4395, 13, 6}, { -4362, 27, 7}, { -4330, 7, 5}, + { -4300, 29, 7}, { -4270, 15, 6}, { -4242, 31, 7}, { -4214, 1, 2}, + { -4162, 17, 6}, { -4112, 9, 5}, { -4065, 19, 6}, { -4021, 5, 4}, + { -3978, 21, 6}, { -3938, 11, 5}, { -3899, 23, 6}, { -3862, 3, 3}, + { -3827, 25, 6}, { -3793, 13, 5}, { -3760, 27, 6}, { -3728, 7, 4}, + { -3698, 29, 6}, { -3668, 15, 5}, { -3640, 31, 6}, { -3612, 1, 1}, + { -3560, 17, 5}, { -3510, 9, 4}, { -3463, 19, 5}, { -3419, 5, 3}, + { -3376, 21, 5}, { -3336, 11, 4}, { -3297, 23, 5}, { -3260, 3, 2}, + { -3225, 25, 5}, { -3191, 13, 4}, { -3158, 27, 5}, { -3126, 7, 3}, + { -3096, 29, 5}, { -3066, 15, 4}, { -3038, 31, 5}, { -3010, 1, 0}, + { -2958, 17, 4}, { -2908, 9, 3}, { -2861, 19, 4}, { -2816, 5, 2}, + { -2774, 21, 4}, { -2734, 11, 3}, { -2695, 23, 4}, { -2658, 3, 1}, + { -2623, 25, 4}, { -2589, 13, 3}, { -2556, 27, 4}, { -2524, 7, 2}, + { -2494, 29, 4}, { -2464, 15, 3}, { -2436, 31, 4}, { -2408, 2, 0}, + { -2356, 17, 3}, { -2306, 9, 2}, { -2259, 19, 3}, { -2214, 5, 1}, + { -2172, 21, 3}, { -2132, 11, 2}, { -2093, 23, 3}, { -2056, 3, 0}, + { -2021, 25, 3}, { -1987, 13, 2}, { -1954, 27, 3}, { -1922, 7, 1}, + { -1892, 29, 3}, { -1862, 15, 2}, { -1834, 31, 3}, { -1806, 4, 0}, + { -1754, 17, 2}, { -1704, 9, 1}, { -1657, 19, 2}, { -1612, 5, 0}, + { -1570, 21, 2}, { -1530, 11, 1}, { -1491, 23, 2}, { -1454, 6, 0}, + { -1419, 25, 2}, { -1384, 13, 1}, { -1352, 27, 2}, { -1320, 7, 0}, + { -1290, 29, 2}, { -1260, 15, 1}, { -1232, 31, 2}, { -1204, 8, 0}, + { -1151, 17, 1}, { -1102, 9, 0}, { -1055, 19, 1}, { -1010, 10, 0}, + { -968, 21, 1}, { -928, 11, 0}, { -889, 23, 1}, { -852, 12, 0}, + { -816, 25, 1}, { -782, 13, 0}, { -750, 27, 1}, { -718, 14, 0}, + { -688, 29, 1}, { -658, 15, 0}, { -630, 31, 1}, { -602, 16, 0}, + { -549, 17, 0}, { -500, 18, 0}, { -453, 19, 0}, { -408, 20, 0}, + { -366, 21, 0}, { -325, 22, 0}, { -287, 23, 0}, { -250, 24, 0}, + { -214, 25, 0}, { -180, 26, 0}, { -148, 27, 0}, { -116, 28, 0}, + { -86, 29, 0}, { -56, 30, 0}, { -28, 31, 0}, { 0, 0, 0}, +}; + +static int pm860x_volatile(unsigned int reg) +{ + BUG_ON(reg >= REG_CACHE_SIZE); + + switch (reg) { + case PM860X_AUDIO_SUPPLIES_2: + return 1; + } + + return 0; +} + +static unsigned int pm860x_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (pm860x_volatile(reg)) + return cache[reg]; + + reg += REG_CACHE_BASE; + + return pm860x_reg_read(codec->control_data, reg); +} + +static int pm860x_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (!pm860x_volatile(reg)) + cache[reg] = (unsigned char)value; + + reg += REG_CACHE_BASE; + + return pm860x_reg_write(codec->control_data, reg, value); +} + +static int snd_soc_get_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int val[2], val2[2], i; + + val[0] = snd_soc_read(codec, reg) & 0x3f; + val[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT) >> 4) & 0xf; + val2[0] = snd_soc_read(codec, reg2) & 0x3f; + val2[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT)) & 0xf; + + for (i = 0; i < ARRAY_SIZE(st_table); i++) { + if ((st_table[i].m == val[0]) && (st_table[i].n == val[1])) + ucontrol->value.integer.value[0] = i; + if ((st_table[i].m == val2[0]) && (st_table[i].n == val2[1])) + ucontrol->value.integer.value[1] = i; + } + return 0; +} + +static int snd_soc_put_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int err; + unsigned int val, val2; + + val = ucontrol->value.integer.value[0]; + val2 = ucontrol->value.integer.value[1]; + + err = snd_soc_update_bits(codec, reg, 0x3f, st_table[val].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0xf0, + st_table[val].n << 4); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, 0x3f, st_table[val2].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0x0f, + st_table[val2].n); + return err; +} + +static int snd_soc_get_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max, val, val2; + unsigned int mask = (1 << fls(max)) - 1; + + val = snd_soc_read(codec, reg) >> shift; + val2 = snd_soc_read(codec, reg2) >> shift; + ucontrol->value.integer.value[0] = (max - val) & mask; + ucontrol->value.integer.value[1] = (max - val2) & mask; + + return 0; +} + +static int snd_soc_put_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max; + unsigned int mask = (1 << fls(max)) - 1; + int err; + unsigned int val, val2, val_mask; + + val_mask = mask << shift; + val = ((max - ucontrol->value.integer.value[0]) & mask); + val2 = ((max - ucontrol->value.integer.value[1]) & mask); + + val = val << shift; + val2 = val2 << shift; + + err = snd_soc_update_bits(codec, reg, val_mask, val); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, val_mask, val2); + return err; +} + +/* DAPM Widget Events */ +/* + * A lot registers are belong to RSYNC domain. It requires enabling RSYNC bit + * after updating these registers. Otherwise, these updated registers won't + * be effective. + */ +static int pm860x_rsync_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + /* + * In order to avoid current on the load, mute power-on and power-off + * should be transients. + * Unmute by DAC_MUTE. It should be unmuted when DAPM sequence is + * finished. + */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, 0); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + unsigned int dac = 0; + int data; + + if (!strcmp(w->name, "Left DAC")) + dac = DAC_LEFT; + if (!strcmp(w->name, "Right DAC")) + dac = DAC_RIGHT; + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (dac) { + /* Auto mute in power-on sequence. */ + dac |= MODULATOR; + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + /* update dac */ + snd_soc_update_bits(codec, PM860X_DAC_EN_2, + dac, dac); + } + break; + case SND_SOC_DAPM_PRE_PMD: + if (dac) { + /* Auto mute in power-off sequence. */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + /* update dac */ + data = snd_soc_read(codec, PM860X_DAC_EN_2); + data &= ~dac; + if (!(data & (DAC_LEFT | DAC_RIGHT))) + data &= ~MODULATOR; + snd_soc_write(codec, PM860X_DAC_EN_2, data); + } + break; + } + return 0; +} + +static const char *pm860x_opamp_texts[] = {"-50%", "-25%", "0%", "75%"}; + +static const char *pm860x_pa_texts[] = {"-33%", "0%", "33%", "66%"}; + +static const struct soc_enum pm860x_hs1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs1_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_hs2_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo1_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo2_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 5, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_ear_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_2, 0, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_ear_opamp_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 3, 4, pm860x_opamp_texts); + +static const struct snd_kcontrol_new pm860x_snd_controls[] = { + SOC_DOUBLE_R_TLV("ADC Capture Volume", PM860X_ADC_ANA_2, + PM860X_ADC_ANA_3, 6, 3, 0, adc_tlv), + SOC_DOUBLE_TLV("AUX Capture Volume", PM860X_ADC_ANA_3, 0, 3, 7, 0, + aux_tlv), + SOC_SINGLE_TLV("MIC1 Capture Volume", PM860X_ADC_ANA_2, 0, 7, 0, + mic_tlv), + SOC_SINGLE_TLV("MIC3 Capture Volume", PM860X_ADC_ANA_2, 3, 7, 0, + mic_tlv), + SOC_DOUBLE_R_EXT_TLV("Sidetone Volume", PM860X_SIDETONE_L_GAIN, + PM860X_SIDETONE_R_GAIN, 0, ARRAY_SIZE(st_table)-1, + 0, snd_soc_get_volsw_2r_st, + snd_soc_put_volsw_2r_st, st_tlv), + SOC_SINGLE_TLV("Speaker Playback Volume", PM860X_EAR_CTRL_1, + 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Line Playback Volume", PM860X_LO1_CTRL, + PM860X_LO2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Headset Playback Volume", PM860X_HS1_CTRL, + PM860X_HS2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Left Playback Volume", + PM860X_HIFIL_GAIN_LEFT, + PM860X_HIFIL_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Right Playback Volume", + PM860X_HIFIR_GAIN_LEFT, + PM860X_HIFIR_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Lofi Playback Volume", PM860X_LOFI_GAIN_LEFT, + PM860X_LOFI_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_ENUM("Headset1 Operational Amplifier Current", + pm860x_hs1_opamp_enum), + SOC_ENUM("Headset2 Operational Amplifier Current", + pm860x_hs2_opamp_enum), + SOC_ENUM("Headset1 Amplifier Current", pm860x_hs1_pa_enum), + SOC_ENUM("Headset2 Amplifier Current", pm860x_hs2_pa_enum), + SOC_ENUM("Lineout1 Operational Amplifier Current", + pm860x_lo1_opamp_enum), + SOC_ENUM("Lineout2 Operational Amplifier Current", + pm860x_lo2_opamp_enum), + SOC_ENUM("Lineout1 Amplifier Current", pm860x_lo1_pa_enum), + SOC_ENUM("Lineout2 Amplifier Current", pm860x_lo2_pa_enum), + SOC_ENUM("Speaker Operational Amplifier Current", + pm860x_spk_ear_opamp_enum), + SOC_ENUM("Speaker Amplifier Current", pm860x_spk_pa_enum), + SOC_ENUM("Earpiece Amplifier Current", pm860x_ear_pa_enum), +}; + +/* + * DAPM Controls + */ + +/* PCM Switch / PCM Interface */ +static const struct snd_kcontrol_new pcm_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ADC_EN_2, 0, 1, 0); + +/* AUX1 Switch */ +static const struct snd_kcontrol_new aux1_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 4, 1, 0); + +/* AUX2 Switch */ +static const struct snd_kcontrol_new aux2_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 5, 1, 0); + +/* Left Ex. PA Switch */ +static const struct snd_kcontrol_new lepa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 2, 1, 0); + +/* Right Ex. PA Switch */ +static const struct snd_kcontrol_new repa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 1, 1, 0); + +/* PCM Mux / Mux7 */ +static const char *aif1_text[] = { + "PCM L", "PCM R", +}; + +static const struct soc_enum aif1_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 6, 2, aif1_text); + +static const struct snd_kcontrol_new aif1_mux = + SOC_DAPM_ENUM("PCM Mux", aif1_enum); + +/* I2S Mux / Mux9 */ +static const char *i2s_din_text[] = { + "DIN", "DIN1", +}; + +static const struct soc_enum i2s_din_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 1, 2, i2s_din_text); + +static const struct snd_kcontrol_new i2s_din_mux = + SOC_DAPM_ENUM("I2S DIN Mux", i2s_din_enum); + +/* I2S Mic Mux / Mux8 */ +static const char *i2s_mic_text[] = { + "Ex PA", "ADC", +}; + +static const struct soc_enum i2s_mic_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 4, 2, i2s_mic_text); + +static const struct snd_kcontrol_new i2s_mic_mux = + SOC_DAPM_ENUM("I2S Mic Mux", i2s_mic_enum); + +/* ADCL Mux / Mux2 */ +static const char *adcl_text[] = { + "ADCR", "ADCL", +}; + +static const struct soc_enum adcl_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 4, 2, adcl_text); + +static const struct snd_kcontrol_new adcl_mux = + SOC_DAPM_ENUM("ADC Left Mux", adcl_enum); + +/* ADCR Mux / Mux3 */ +static const char *adcr_text[] = { + "ADCL", "ADCR", +}; + +static const struct soc_enum adcr_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 2, 2, adcr_text); + +static const struct snd_kcontrol_new adcr_mux = + SOC_DAPM_ENUM("ADC Right Mux", adcr_enum); + +/* ADCR EC Mux / Mux6 */ +static const char *adcr_ec_text[] = { + "ADCR", "EC", +}; + +static const struct soc_enum adcr_ec_enum = + SOC_ENUM_SINGLE(PM860X_ADC_EN_2, 3, 2, adcr_ec_text); + +static const struct snd_kcontrol_new adcr_ec_mux = + SOC_DAPM_ENUM("ADCR EC Mux", adcr_ec_enum); + +/* EC Mux / Mux4 */ +static const char *ec_text[] = { + "Left", "Right", "Left + Right", +}; + +static const struct soc_enum ec_enum = + SOC_ENUM_SINGLE(PM860X_EC_PATH, 1, 3, ec_text); + +static const struct snd_kcontrol_new ec_mux = + SOC_DAPM_ENUM("EC Mux", ec_enum); + +static const char *dac_text[] = { + "No input", "Right", "Left", "No input", +}; + +/* DAC Headset 1 Mux / Mux10 */ +static const struct soc_enum dac_hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs1_mux = + SOC_DAPM_ENUM("DAC HS1 Mux", dac_hs1_enum); + +/* DAC Headset 2 Mux / Mux11 */ +static const struct soc_enum dac_hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 2, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs2_mux = + SOC_DAPM_ENUM("DAC HS2 Mux", dac_hs2_enum); + +/* DAC Lineout 1 Mux / Mux12 */ +static const struct soc_enum dac_lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 4, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo1_mux = + SOC_DAPM_ENUM("DAC LO1 Mux", dac_lo1_enum); + +/* DAC Lineout 2 Mux / Mux13 */ +static const struct soc_enum dac_lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 6, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo2_mux = + SOC_DAPM_ENUM("DAC LO2 Mux", dac_lo2_enum); + +/* DAC Spearker Earphone Mux / Mux14 */ +static const struct soc_enum dac_spk_ear_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_2, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_spk_ear_mux = + SOC_DAPM_ENUM("DAC SP Mux", dac_spk_ear_enum); + +/* Headset 1 Mux / Mux15 */ +static const char *in_text[] = { + "Digital", "Analog", +}; + +static const struct soc_enum hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 0, 2, in_text); + +static const struct snd_kcontrol_new hs1_mux = + SOC_DAPM_ENUM("Headset1 Mux", hs1_enum); + +/* Headset 2 Mux / Mux16 */ +static const struct soc_enum hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 1, 2, in_text); + +static const struct snd_kcontrol_new hs2_mux = + SOC_DAPM_ENUM("Headset2 Mux", hs2_enum); + +/* Lineout 1 Mux / Mux17 */ +static const struct soc_enum lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 2, 2, in_text); + +static const struct snd_kcontrol_new lo1_mux = + SOC_DAPM_ENUM("Lineout1 Mux", lo1_enum); + +/* Lineout 2 Mux / Mux18 */ +static const struct soc_enum lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 3, 2, in_text); + +static const struct snd_kcontrol_new lo2_mux = + SOC_DAPM_ENUM("Lineout2 Mux", lo2_enum); + +/* Speaker Earpiece Demux */ +static const char *spk_text[] = { + "Earpiece", "Speaker", +}; + +static const struct soc_enum spk_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 6, 2, spk_text); + +static const struct snd_kcontrol_new spk_demux = + SOC_DAPM_ENUM("Speaker Earpiece Demux", spk_enum); + +/* MIC Mux / Mux1 */ +static const char *mic_text[] = { + "Mic 1", "Mic 2", +}; + +static const struct soc_enum mic_enum = + SOC_ENUM_SINGLE(PM860X_ADC_ANA_4, 4, 2, mic_text); + +static const struct snd_kcontrol_new mic_mux = + SOC_DAPM_ENUM("MIC Mux", mic_enum); + +static const struct snd_soc_dapm_widget pm860x_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("PCM SDI", "PCM Playback", 0, + PM860X_ADC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("PCM SDO", "PCM Capture", 0, + PM860X_PCM_IFACE_3, 1, 1), + + + SND_SOC_DAPM_AIF_IN("I2S DIN", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_IN("I2S DIN1", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("I2S DOUT", "I2S Capture", 0, + PM860X_I2S_IFACE_3, 5, 1), + SND_SOC_DAPM_MUX("I2S Mic Mux", SND_SOC_NOPM, 0, 0, &i2s_mic_mux), + SND_SOC_DAPM_MUX("ADC Left Mux", SND_SOC_NOPM, 0, 0, &adcl_mux), + SND_SOC_DAPM_MUX("ADC Right Mux", SND_SOC_NOPM, 0, 0, &adcr_mux), + SND_SOC_DAPM_MUX("EC Mux", SND_SOC_NOPM, 0, 0, &ec_mux), + SND_SOC_DAPM_MUX("ADCR EC Mux", SND_SOC_NOPM, 0, 0, &adcr_ec_mux), + SND_SOC_DAPM_SWITCH("Left EPA", SND_SOC_NOPM, 0, 0, + &lepa_switch_controls), + SND_SOC_DAPM_SWITCH("Right EPA", SND_SOC_NOPM, 0, 0, + &repa_switch_controls), + + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "Left ADC MOD", PM860X_ADC_EN_1, + 0, 1, 1, 0), + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "Right ADC MOD", PM860X_ADC_EN_1, + 1, 1, 1, 0), + SND_SOC_DAPM_ADC("Left ADC", NULL, PM860X_ADC_EN_2, 5, 0), + SND_SOC_DAPM_ADC("Right ADC", NULL, PM860X_ADC_EN_2, 4, 0), + + SND_SOC_DAPM_SWITCH("AUX1 Switch", SND_SOC_NOPM, 0, 0, + &aux1_switch_controls), + SND_SOC_DAPM_SWITCH("AUX2 Switch", SND_SOC_NOPM, 0, 0, + &aux2_switch_controls), + + SND_SOC_DAPM_MUX("MIC Mux", SND_SOC_NOPM, 0, 0, &mic_mux), + SND_SOC_DAPM_MICBIAS("Mic1 Bias", PM860X_ADC_ANA_1, 2, 0), + SND_SOC_DAPM_MICBIAS("Mic3 Bias", PM860X_ADC_ANA_1, 7, 0), + SND_SOC_DAPM_PGA("MIC1 Volume", PM860X_ADC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("MIC3 Volume", PM860X_ADC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX1 Volume", PM860X_ADC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX2 Volume", PM860X_ADC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("Sidetone PGA", PM860X_ADC_EN_2, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lofi PGA", PM860X_ADC_EN_2, 2, 0, NULL, 0), + + SND_SOC_DAPM_INPUT("AUX1"), + SND_SOC_DAPM_INPUT("AUX2"), + SND_SOC_DAPM_INPUT("MIC1P"), + SND_SOC_DAPM_INPUT("MIC1N"), + SND_SOC_DAPM_INPUT("MIC2P"), + SND_SOC_DAPM_INPUT("MIC2N"), + SND_SOC_DAPM_INPUT("MIC3P"), + SND_SOC_DAPM_INPUT("MIC3N"), + + SND_SOC_DAPM_DAC_E("Left DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_DAC_E("Right DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_MUX("I2S DIN Mux", SND_SOC_NOPM, 0, 0, &i2s_din_mux), + SND_SOC_DAPM_MUX("DAC HS1 Mux", SND_SOC_NOPM, 0, 0, &dac_hs1_mux), + SND_SOC_DAPM_MUX("DAC HS2 Mux", SND_SOC_NOPM, 0, 0, &dac_hs2_mux), + SND_SOC_DAPM_MUX("DAC LO1 Mux", SND_SOC_NOPM, 0, 0, &dac_lo1_mux), + SND_SOC_DAPM_MUX("DAC LO2 Mux", SND_SOC_NOPM, 0, 0, &dac_lo2_mux), + SND_SOC_DAPM_MUX("DAC SP Mux", SND_SOC_NOPM, 0, 0, &dac_spk_ear_mux), + SND_SOC_DAPM_MUX("Headset1 Mux", SND_SOC_NOPM, 0, 0, &hs1_mux), + SND_SOC_DAPM_MUX("Headset2 Mux", SND_SOC_NOPM, 0, 0, &hs2_mux), + SND_SOC_DAPM_MUX("Lineout1 Mux", SND_SOC_NOPM, 0, 0, &lo1_mux), + SND_SOC_DAPM_MUX("Lineout2 Mux", SND_SOC_NOPM, 0, 0, &lo2_mux), + SND_SOC_DAPM_MUX("Speaker Earpiece Demux", SND_SOC_NOPM, 0, 0, + &spk_demux), + + + SND_SOC_DAPM_PGA("Headset1 PGA", PM860X_DAC_EN_1, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Headset2 PGA", PM860X_DAC_EN_1, 1, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("HS1"), + SND_SOC_DAPM_OUTPUT("HS2"), + SND_SOC_DAPM_PGA("Lineout1 PGA", PM860X_DAC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lineout2 PGA", PM860X_DAC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LINEOUT1"), + SND_SOC_DAPM_OUTPUT("LINEOUT2"), + SND_SOC_DAPM_PGA("Earpiece PGA", PM860X_DAC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("EARP"), + SND_SOC_DAPM_OUTPUT("EARN"), + SND_SOC_DAPM_PGA("Speaker PGA", PM860X_DAC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LSP"), + SND_SOC_DAPM_OUTPUT("LSN"), + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "VCODEC", PM860X_AUDIO_SUPPLIES_2, + 0, SUPPLY_MASK, SUPPLY_MASK, 0), + + PM860X_DAPM_OUTPUT("RSYNC", pm860x_rsync_event), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* supply */ + {"Left DAC", NULL, "VCODEC"}, + {"Right DAC", NULL, "VCODEC"}, + {"Left ADC", NULL, "VCODEC"}, + {"Right ADC", NULL, "VCODEC"}, + {"Left ADC", NULL, "Left ADC MOD"}, + {"Right ADC", NULL, "Right ADC MOD"}, + + /* PCM/AIF1 Inputs */ + {"PCM SDO", NULL, "ADC Left Mux"}, + {"PCM SDO", NULL, "ADCR EC Mux"}, + + /* PCM/AFI2 Outputs */ + {"Lofi PGA", NULL, "PCM SDI"}, + {"Lofi PGA", NULL, "Sidetone PGA"}, + {"Left DAC", NULL, "Lofi PGA"}, + {"Right DAC", NULL, "Lofi PGA"}, + + /* I2S/AIF2 Inputs */ + {"MIC Mux", "Mic 1", "MIC1P"}, + {"MIC Mux", "Mic 1", "MIC1N"}, + {"MIC Mux", "Mic 2", "MIC2P"}, + {"MIC Mux", "Mic 2", "MIC2N"}, + {"MIC1 Volume", NULL, "MIC Mux"}, + {"MIC3 Volume", NULL, "MIC3P"}, + {"MIC3 Volume", NULL, "MIC3N"}, + {"Left ADC", NULL, "MIC1 Volume"}, + {"Right ADC", NULL, "MIC3 Volume"}, + {"ADC Left Mux", "ADCR", "Right ADC"}, + {"ADC Left Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCR", "Right ADC"}, + {"Left EPA", "Switch", "Left DAC"}, + {"Right EPA", "Switch", "Right DAC"}, + {"EC Mux", "Left", "Left DAC"}, + {"EC Mux", "Right", "Right DAC"}, + {"EC Mux", "Left + Right", "Left DAC"}, + {"EC Mux", "Left + Right", "Right DAC"}, + {"ADCR EC Mux", "ADCR", "ADC Right Mux"}, + {"ADCR EC Mux", "EC", "EC Mux"}, + {"I2S Mic Mux", "Ex PA", "Left EPA"}, + {"I2S Mic Mux", "Ex PA", "Right EPA"}, + {"I2S Mic Mux", "ADC", "ADC Left Mux"}, + {"I2S Mic Mux", "ADC", "ADCR EC Mux"}, + {"I2S DOUT", NULL, "I2S Mic Mux"}, + + /* I2S/AIF2 Outputs */ + {"I2S DIN Mux", "DIN", "I2S DIN"}, + {"I2S DIN Mux", "DIN1", "I2S DIN1"}, + {"Left DAC", NULL, "I2S DIN Mux"}, + {"Right DAC", NULL, "I2S DIN Mux"}, + {"DAC HS1 Mux", "Left", "Left DAC"}, + {"DAC HS1 Mux", "Right", "Right DAC"}, + {"DAC HS2 Mux", "Left", "Left DAC"}, + {"DAC HS2 Mux", "Right", "Right DAC"}, + {"DAC LO1 Mux", "Left", "Left DAC"}, + {"DAC LO1 Mux", "Right", "Right DAC"}, + {"DAC LO2 Mux", "Left", "Left DAC"}, + {"DAC LO2 Mux", "Right", "Right DAC"}, + {"Headset1 Mux", "Digital", "DAC HS1 Mux"}, + {"Headset2 Mux", "Digital", "DAC HS2 Mux"}, + {"Lineout1 Mux", "Digital", "DAC LO1 Mux"}, + {"Lineout2 Mux", "Digital", "DAC LO2 Mux"}, + {"Headset1 PGA", NULL, "Headset1 Mux"}, + {"Headset2 PGA", NULL, "Headset2 Mux"}, + {"Lineout1 PGA", NULL, "Lineout1 Mux"}, + {"Lineout2 PGA", NULL, "Lineout2 Mux"}, + {"DAC SP Mux", "Left", "Left DAC"}, + {"DAC SP Mux", "Right", "Right DAC"}, + {"Speaker Earpiece Demux", "Speaker", "DAC SP Mux"}, + {"Speaker PGA", NULL, "Speaker Earpiece Demux"}, + {"Earpiece PGA", NULL, "Speaker Earpiece Demux"}, + + {"RSYNC", NULL, "Headset1 PGA"}, + {"RSYNC", NULL, "Headset2 PGA"}, + {"RSYNC", NULL, "Lineout1 PGA"}, + {"RSYNC", NULL, "Lineout2 PGA"}, + {"RSYNC", NULL, "Speaker PGA"}, + {"RSYNC", NULL, "Speaker PGA"}, + {"RSYNC", NULL, "Earpiece PGA"}, + {"RSYNC", NULL, "Earpiece PGA"}, + + {"HS1", NULL, "RSYNC"}, + {"HS2", NULL, "RSYNC"}, + {"LINEOUT1", NULL, "RSYNC"}, + {"LINEOUT2", NULL, "RSYNC"}, + {"LSP", NULL, "RSYNC"}, + {"LSN", NULL, "RSYNC"}, + {"EARP", NULL, "RSYNC"}, + {"EARN", NULL, "RSYNC"}, +}; + +/* + * Use MUTE_LEFT & MUTE_RIGHT to implement digital mute. + * These bits can also be used to mute. + */ +static int pm860x_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int data = 0, mask = MUTE_LEFT | MUTE_RIGHT; + + if (mute) + data = mask; + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, mask, data); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf = 0, mask = 0; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf &= ~PCM_INF2_18WL; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf |= PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + mask |= PCM_INF2_18WL; + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 16000: + inf = 3; + break; + case 32000: + inf = 6; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_PCM_RATE, 0x0f, inf); + + return 0; +} + +static int pm860x_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int ret = -EINVAL; + + mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + if (pm860x->dir == PM860X_CLK_DIR_OUT) { + inf |= PCM_INF2_MASTER; + ret = 0; + } + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) { + inf &= ~PCM_INF2_MASTER; + ret = 0; + } + break; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + inf |= PCM_EXACT_I2S; + ret = 0; + break; + } + mask |= PCM_MODE_MASK; + if (ret) + return ret; + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + return 0; +} + +static int pm860x_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + if (dir == PM860X_CLK_DIR_OUT) + pm860x->dir = PM860X_CLK_DIR_OUT; + else { + pm860x->dir = PM860X_CLK_DIR_IN; + return -EINVAL; + } + + return 0; +} + +static int pm860x_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf = 0; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf = PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, PCM_INF2_18WL, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 11025: + inf = 1; + break; + case 16000: + inf = 3; + break; + case 22050: + inf = 4; + break; + case 32000: + inf = 6; + break; + case 44100: + inf = 7; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_4, 0xf, inf); + + return 0; +} + +static int pm860x_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + + mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + if (pm860x->dir == PM860X_CLK_DIR_OUT) + inf |= PCM_INF2_MASTER; + else + return -EINVAL; + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) + inf &= ~PCM_INF2_MASTER; + else + return -EINVAL; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + inf |= PCM_EXACT_I2S; + break; + default: + return -EINVAL; + } + mask |= PCM_MODE_MASK; + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, mask, inf); + return 0; +} + +static int pm860x_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int data; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Enable Audio PLL & Audio section */ + data = AUDIO_PLL | AUDIO_SECTION_RESET + | AUDIO_SECTION_ON; + pm860x_reg_write(codec->control_data, REG_MISC2, data); + } + break; + + case SND_SOC_BIAS_OFF: + data = AUDIO_PLL | AUDIO_SECTION_RESET | AUDIO_SECTION_ON; + pm860x_set_bits(codec->control_data, REG_MISC2, data, 0); + break; + } + codec->bias_level = level; + return 0; +} + +static struct snd_soc_dai_ops pm860x_pcm_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_pcm_hw_params, + .set_fmt = pm860x_pcm_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops pm860x_i2s_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_i2s_hw_params, + .set_fmt = pm860x_i2s_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +#define PM860X_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000) + +static struct snd_soc_dai_driver pm860x_dai[] = { + { + /* DAI PCM */ + .name = "88pm860x-pcm", + .id = 1, + .playback = { + .stream_name = "PCM Playback", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "PCM Capture", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_pcm_dai_ops, + }, { + /* DAI I2S */ + .name = "88pm860x-i2s", + .id = 2, + .playback = { + .stream_name = "I2S Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "I2S Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_i2s_dai_ops, + }, +}; + +static irqreturn_t pm860x_codec_handler(int irq, void *data) +{ + struct pm860x_priv *pm860x = data; + int status, shrt, report = 0, mic_report = 0; + int mask; + + status = pm860x_reg_read(pm860x->i2c, REG_STATUS_1); + shrt = pm860x_reg_read(pm860x->i2c, REG_SHORTS); + mask = pm860x->det.hs_shrt | pm860x->det.hook_det | pm860x->det.lo_shrt + | pm860x->det.hp_det; + + if ((pm860x->det.hp_det & SND_JACK_HEADPHONE) + && (status & HEADSET_STATUS)) + report |= SND_JACK_HEADPHONE; + + if ((pm860x->det.mic_det & SND_JACK_MICROPHONE) + && (status & MIC_STATUS)) + mic_report |= SND_JACK_MICROPHONE; + + if (pm860x->det.hs_shrt && (shrt & (SHORT_HS1 | SHORT_HS2))) + report |= pm860x->det.hs_shrt; + + if (pm860x->det.hook_det && (status & HOOK_STATUS)) + report |= pm860x->det.hook_det; + + if (pm860x->det.lo_shrt && (shrt & (SHORT_LO1 | SHORT_LO2))) + report |= pm860x->det.lo_shrt; + + if (report) + snd_soc_jack_report(pm860x->det.hp_jack, report, mask); + if (mic_report) + snd_soc_jack_report(pm860x->det.mic_jack, SND_JACK_MICROPHONE, + SND_JACK_MICROPHONE); + + dev_dbg(pm860x->codec->dev, "headphone report:0x%x, mask:%x\n", + report, mask); + dev_dbg(pm860x->codec->dev, "microphone report:0x%x\n", mic_report); + return IRQ_HANDLED; +} + +int pm860x_hs_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack, + int det, int hook, int hs_shrt, int lo_shrt) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int data; + + pm860x->det.hp_jack = jack; + pm860x->det.hp_det = det; + pm860x->det.hook_det = hook; + pm860x->det.hs_shrt = hs_shrt; + pm860x->det.lo_shrt = lo_shrt; + + if (det & SND_JACK_HEADPHONE) + pm860x_set_bits(codec->control_data, REG_HS_DET, + EN_HS_DET, EN_HS_DET); + /* headset short detect */ + if (hs_shrt) { + data = CLR_SHORT_HS2 | CLR_SHORT_HS1; + pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + } + /* Lineout short detect */ + if (lo_shrt) { + data = CLR_SHORT_LO2 | CLR_SHORT_LO1; + pm860x_set_bits(codec->control_data, REG_SHORTS, data, data); + } + + /* sync status */ + pm860x_codec_handler(0, pm860x); + return 0; +} +EXPORT_SYMBOL_GPL(pm860x_hs_jack_detect); + +int pm860x_mic_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack, int det) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + pm860x->det.mic_jack = jack; + pm860x->det.mic_det = det; + + if (det & SND_JACK_MICROPHONE) + pm860x_set_bits(codec->control_data, REG_MIC_DET, + MICDET_MASK, MICDET_MASK); + + /* sync status */ + pm860x_codec_handler(0, pm860x); + return 0; +} +EXPORT_SYMBOL_GPL(pm860x_mic_jack_detect); + +static int pm860x_probe(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i, ret; + + pm860x->codec = codec; + + codec->control_data = pm860x->i2c; + + for (i = 0; i < 4; i++) { + ret = request_threaded_irq(pm860x->irq[i], NULL, + pm860x_codec_handler, IRQF_ONESHOT, + pm860x->name[i], pm860x); + if (ret < 0) { + dev_err(codec->dev, "Failed to request IRQ!\n"); + goto out_irq; + } + } + + pm860x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + ret = pm860x_bulk_read(codec->control_data, REG_CACHE_BASE, + REG_CACHE_SIZE, codec->reg_cache); + if (ret < 0) { + dev_err(codec->dev, "Failed to fill register cache: %d\n", + ret); + goto out_codec; + } + + snd_soc_add_controls(codec, pm860x_snd_controls, + ARRAY_SIZE(pm860x_snd_controls)); + snd_soc_dapm_new_controls(codec, pm860x_dapm_widgets, + ARRAY_SIZE(pm860x_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + return 0; + +out_codec: + i = 3; +out_irq: + for (; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + return -EINVAL; +} + +static int pm860x_remove(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i; + + for (i = 3; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + pm860x_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_pm860x = { + .probe = pm860x_probe, + .remove = pm860x_remove, + .read = pm860x_read_reg_cache, + .write = pm860x_write_reg_cache, + .reg_cache_size = REG_CACHE_SIZE, + .reg_word_size = sizeof(u8), + .set_bias_level = pm860x_set_bias_level, +}; + +static int __devinit pm860x_codec_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_priv *pm860x; + struct resource *res; + int i, ret; + + pm860x = kzalloc(sizeof(struct pm860x_priv), GFP_KERNEL); + if (pm860x == NULL) + return -ENOMEM; + + pm860x->chip = chip; + pm860x->i2c = (chip->id == CHIP_PM8607) ? chip->client + : chip->companion; + platform_set_drvdata(pdev, pm860x); + + for (i = 0; i < 4; i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + if (!res) { + dev_err(&pdev->dev, "Failed to get IRQ resources\n"); + goto out; + } + pm860x->irq[i] = res->start + chip->irq_base; + strncpy(pm860x->name[i], res->name, MAX_NAME_LEN); + } + + ret = snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pm860x, + pm860x_dai, ARRAY_SIZE(pm860x_dai)); + if (ret) { + dev_err(&pdev->dev, "Failed to register codec\n"); + goto out; + } + return ret; + +out: + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return -EINVAL; +} + +static int __devexit pm860x_codec_remove(struct platform_device *pdev) +{ + struct pm860x_priv *pm860x = platform_get_drvdata(pdev); + + snd_soc_unregister_codec(&pdev->dev); + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return 0; +} + +static struct platform_driver pm860x_codec_driver = { + .driver = { + .name = "88pm860x-codec", + .owner = THIS_MODULE, + }, + .probe = pm860x_codec_probe, + .remove = __devexit_p(pm860x_codec_remove), +}; + +static __init int pm860x_init(void) +{ + return platform_driver_register(&pm860x_codec_driver); +} +module_init(pm860x_init); + +static __exit void pm860x_exit(void) +{ + platform_driver_unregister(&pm860x_codec_driver); +} +module_exit(pm860x_exit); + +MODULE_DESCRIPTION("ASoC 88PM860x driver"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-codec"); + diff --git a/sound/soc/codecs/88pm860x-codec.h b/sound/soc/codecs/88pm860x-codec.h new file mode 100644 index 0000000..3364ba4 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.h @@ -0,0 +1,97 @@ +/* + * 88pm860x-codec.h -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __88PM860X_H +#define __88PM860X_H + +/* The offset of these registers are 0xb0 */ +#define PM860X_PCM_IFACE_1 0x00 +#define PM860X_PCM_IFACE_2 0x01 +#define PM860X_PCM_IFACE_3 0x02 +#define PM860X_PCM_RATE 0x03 +#define PM860X_EC_PATH 0x04 +#define PM860X_SIDETONE_L_GAIN 0x05 +#define PM860X_SIDETONE_R_GAIN 0x06 +#define PM860X_SIDETONE_SHIFT 0x07 +#define PM860X_ADC_OFFSET_1 0x08 +#define PM860X_ADC_OFFSET_2 0x09 +#define PM860X_DMIC_DELAY 0x0a + +#define PM860X_I2S_IFACE_1 0x0b +#define PM860X_I2S_IFACE_2 0x0c +#define PM860X_I2S_IFACE_3 0x0d +#define PM860X_I2S_IFACE_4 0x0e +#define PM860X_EQUALIZER_N0_1 0x0f +#define PM860X_EQUALIZER_N0_2 0x10 +#define PM860X_EQUALIZER_N1_1 0x11 +#define PM860X_EQUALIZER_N1_2 0x12 +#define PM860X_EQUALIZER_D1_1 0x13 +#define PM860X_EQUALIZER_D1_2 0x14 +#define PM860X_LOFI_GAIN_LEFT 0x15 +#define PM860X_LOFI_GAIN_RIGHT 0x16 +#define PM860X_HIFIL_GAIN_LEFT 0x17 +#define PM860X_HIFIL_GAIN_RIGHT 0x18 +#define PM860X_HIFIR_GAIN_LEFT 0x19 +#define PM860X_HIFIR_GAIN_RIGHT 0x1a +#define PM860X_DAC_OFFSET 0x1b +#define PM860X_OFFSET_LEFT_1 0x1c +#define PM860X_OFFSET_LEFT_2 0x1d +#define PM860X_OFFSET_RIGHT_1 0x1e +#define PM860X_OFFSET_RIGHT_2 0x1f +#define PM860X_ADC_ANA_1 0x20 +#define PM860X_ADC_ANA_2 0x21 +#define PM860X_ADC_ANA_3 0x22 +#define PM860X_ADC_ANA_4 0x23 +#define PM860X_ANA_TO_ANA 0x24 +#define PM860X_HS1_CTRL 0x25 +#define PM860X_HS2_CTRL 0x26 +#define PM860X_LO1_CTRL 0x27 +#define PM860X_LO2_CTRL 0x28 +#define PM860X_EAR_CTRL_1 0x29 +#define PM860X_EAR_CTRL_2 0x2a +#define PM860X_AUDIO_SUPPLIES_1 0x2b +#define PM860X_AUDIO_SUPPLIES_2 0x2c +#define PM860X_ADC_EN_1 0x2d +#define PM860X_ADC_EN_2 0x2e +#define PM860X_DAC_EN_1 0x2f +#define PM860X_DAC_EN_2 0x31 +#define PM860X_AUDIO_CAL_1 0x32 +#define PM860X_AUDIO_CAL_2 0x33 +#define PM860X_AUDIO_CAL_3 0x34 +#define PM860X_AUDIO_CAL_4 0x35 +#define PM860X_AUDIO_CAL_5 0x36 +#define PM860X_ANA_INPUT_SEL_1 0x37 +#define PM860X_ANA_INPUT_SEL_2 0x38 + +#define PM860X_PCM_IFACE_4 0x39 +#define PM860X_I2S_IFACE_5 0x3a + +#define PM860X_SHORTS 0x3b +#define PM860X_PLL_ADJ_1 0x3c +#define PM860X_PLL_ADJ_2 0x3d + +/* bits definition */ +#define PM860X_CLK_DIR_IN 0 +#define PM860X_CLK_DIR_OUT 1 + +#define PM860X_DET_HEADSET (1 << 0) +#define PM860X_DET_MIC (1 << 1) +#define PM860X_DET_HOOK (1 << 2) +#define PM860X_SHORT_HEADSET (1 << 3) +#define PM860X_SHORT_LINEOUT (1 << 4) +#define PM860X_DET_MASK 0x1F + +extern int pm860x_hs_jack_detect(struct snd_soc_codec *, struct snd_soc_jack *, + int, int, int, int); +extern int pm860x_mic_jack_detect(struct snd_soc_codec *, struct snd_soc_jack *, + int); + +#endif /* __88PM860X_H */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index bfdd92b..a3cfc18 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -10,6 +10,7 @@ config SND_SOC_I2C_AND_SPI config SND_SOC_ALL_CODECS tristate "Build all ASoC CODEC drivers" + select SND_SOC_88PM860X if MFD_88PM860X select SND_SOC_L3 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS select SND_SOC_AD1836 if SPI_MASTER @@ -85,6 +86,9 @@ config SND_SOC_ALL_CODECS If unsure select "N". +config SND_SOC_88PM860X + tristate + config SND_SOC_WM_HUBS tristate default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 9c3c39f..b9c4358 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,3 +1,4 @@ +snd-soc-88pm860x-objs := 88pm860x-codec.o snd-soc-ac97-objs := ac97.o snd-soc-ad1836-objs := ad1836.o snd-soc-ad193x-objs := ad193x.o @@ -67,6 +68,7 @@ snd-soc-tpa6130a2-objs := tpa6130a2.o snd-soc-wm2000-objs := wm2000.o snd-soc-wm9090-objs := wm9090.o +obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o -- 1.5.6.5

1 0

[PATCH 1/3] ASoC: add 88pm860x codec driver
by Haojian Zhuang 12 Aug '10

12 Aug '10

Add 88PM860x codec driver. 88PM860x codec supports two interfaces. And it also supports headset/mic/hook/short detection. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/codecs/88pm860x-codec.c | 1410 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/88pm860x-codec.h | 92 +++ sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + 4 files changed, 1508 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/88pm860x-codec.c create mode 100644 sound/soc/codecs/88pm860x-codec.h diff --git a/sound/soc/codecs/88pm860x-codec.c b/sound/soc/codecs/88pm860x-codec.c new file mode 100644 index 0000000..1acb1f1 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.c @@ -0,0 +1,1410 @@ +/* + * 88pm860x-codec.c -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Author: Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/mfd/88pm860x.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> + +#include "88pm860x-codec.h" + +#define MAX_NAME_LEN 20 +#define REG_CACHE_SIZE 0x40 +#define REG_CACHE_BASE 0xb0 + +/* Status Register 1 (0x01) */ +#define REG_STATUS_1 0x01 +#define MIC_STATUS (1 << 7) +#define HOOK_STATUS (1 << 6) +#define HEADSET_STATUS (1 << 5) + +/* Mic Detection Register (0x37) */ +#define REG_MIC_DET 0x37 +#define CONTINUOUS_POLLING (3 << 1) +#define EN_MIC_DET (1 << 0) +#define MICDET_MASK 0x07 + +/* Headset Detection Register (0x38) */ +#define REG_HS_DET 0x38 +#define EN_HS_DET (1 << 0) + +/* Misc2 Register (0x42) */ +#define REG_MISC2 0x42 +#define AUDIO_PLL (1 << 5) +#define AUDIO_SECTION_RESET (1 << 4) +#define AUDIO_SECTION_ON (1 << 3) + +/* PCM Interface Register 2 (0xb1) */ +#define PCM_INF2_BCLK (1 << 6) /* Bit clock polarity */ +#define PCM_INF2_FS (1 << 5) /* Frame Sync polarity */ +#define PCM_INF2_MASTER (1 << 4) /* Master / Slave */ +#define PCM_INF2_18WL (1 << 3) /* 18 / 16 bits */ +#define PCM_GENERAL_I2S 0 +#define PCM_EXACT_I2S 1 +#define PCM_LEFT_I2S 2 +#define PCM_RIGHT_I2S 3 +#define PCM_SHORT_FS 4 +#define PCM_LONG_FS 5 +#define PCM_MODE_MASK 7 + +/* I2S Interface Register 4 (0xbe) */ +#define I2S_EQU_BYP (1 << 6) + +/* DAC Offset Register (0xcb) */ +#define DAC_MUTE (1 << 7) + +/* ADC Analog Register 1 (0xd0) */ +#define REG_ADC_ANA_1 0xd0 +#define MIC1BIAS_MASK 0x60 + +/* Earpiece/Speaker Control Register 2 (0xda) */ +#define REG_EAR2 0xda +#define RSYNC_CHANGE (1 << 2) + +/* Audio Supplies Register 2 (0xdc) */ +#define REG_SUPPLIES2 0xdc +#define LDO15_READY (1 << 4) +#define LDO15_EN (1 << 3) +#define CPUMP_READY (1 << 2) +#define CPUMP_EN (1 << 1) +#define AUDIO_EN (1 << 0) +#define SUPPLY_MASK (LDO15_EN | CPUMP_EN | AUDIO_EN) + +/* Audio Enable Register 1 (0xdd) */ +#define ADC_MOD_RIGHT (1 << 1) +#define ADC_MOD_LEFT (1 << 0) + +/* Audio Enable Register 2 (0xde) */ +#define ADC_LEFT (1 << 5) +#define ADC_RIGHT (1 << 4) + +/* DAC Enable Register 2 (0xe1) */ +#define DAC_LEFT (1 << 5) +#define DAC_RIGHT (1 << 4) +#define MODULATOR (1 << 3) + +/* Shorts Register (0xeb) */ +#define REG_SHORTS 0xeb +#define SHORT_LO2 (1 << 6) +#define SHORT_LO1 (1 << 4) +#define SHORT_HS2 (1 << 2) +#define SHORT_HS1 (1 << 0) + +enum { + FILTER_BYPASS = 0, + FILTER_LOW_PASS_1, + FILTER_LOW_PASS_2, + FILTER_HIGH_PASS_3, + FILTER_MAX, +}; + +struct pm860x_priv { + unsigned int sysclk; + unsigned int pcmclk; + unsigned int dir; + unsigned int filter; + struct snd_soc_codec *codec; + struct i2c_client *i2c; + struct pm860x_chip *chip; + + int irq[4]; + unsigned char name[4][MAX_NAME_LEN]; + unsigned char reg_cache[REG_CACHE_SIZE]; +}; + +/* -9450dB to 0dB in 150dB steps ( mute instead of -9450dB) */ +static const DECLARE_TLV_DB_SCALE(dpga_tlv, -9450, 150, 1); + +/* -9dB to 0db in 3dB steps */ +static const DECLARE_TLV_DB_SCALE(adc_tlv, -900, 300, 0); + +/* {-23, -17, -13.5, -11, -9, -6, -3, 0}dB */ +static const unsigned int mic_tlv[] = { + TLV_DB_RANGE_HEAD(5), + 0, 0, TLV_DB_SCALE_ITEM(-2300, 0, 0), + 1, 1, TLV_DB_SCALE_ITEM(-1700, 0, 0), + 2, 2, TLV_DB_SCALE_ITEM(-1350, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(-1100, 0, 0), + 4, 7, TLV_DB_SCALE_ITEM(-900, 300, 0), +}; + +/* {0, 0, 0, -6, 0, 6, 12, 18}dB */ +static const unsigned int aux_tlv[] = { + TLV_DB_RANGE_HEAD(2), + 0, 2, TLV_DB_SCALE_ITEM(0, 0, 0), + 3, 7, TLV_DB_SCALE_ITEM(-600, 600, 0), +}; + +/* {-16, -13, -10, -7, -5.2, -3,3, -2.2, 0}dB, mute instead of -16dB */ +static const unsigned int out_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 3, TLV_DB_SCALE_ITEM(-1600, 300, 1), + 4, 4, TLV_DB_SCALE_ITEM(-520, 0, 0), + 5, 5, TLV_DB_SCALE_ITEM(-330, 0, 0), + 6, 7, TLV_DB_SCALE_ITEM(-220, 220, 0), +}; + +static const unsigned int st_tlv[] = { + TLV_DB_RANGE_HEAD(8), + 0, 1, TLV_DB_SCALE_ITEM(-12041, 602, 0), + 2, 3, TLV_DB_SCALE_ITEM(-11087, 250, 0), + 4, 5, TLV_DB_SCALE_ITEM(-10643, 158, 0), + 6, 7, TLV_DB_SCALE_ITEM(-10351, 116, 0), + 8, 9, TLV_DB_SCALE_ITEM(-10133, 92, 0), + 10, 13, TLV_DB_SCALE_ITEM(-9958, 70, 0), + 14, 17, TLV_DB_SCALE_ITEM(-9689, 53, 0), + 18, 271, TLV_DB_SCALE_ITEM(-9484, 37, 0), +}; + +/* Sidetone Gain = M * 2^(-5-N) */ +struct st_gain { + unsigned int db; + unsigned int m; + unsigned int n; +}; + +static struct st_gain st_table[] = { + {-12041, 1, 15}, {-11439, 1, 14}, {-11087, 3, 15}, {-10837, 1, 13}, + {-10643, 5, 15}, {-10485, 3, 14}, {-10351, 7, 15}, {-10235, 1, 12}, + {-10133, 9, 15}, {-10041, 5, 14}, { -9958, 11, 15}, { -9883, 3, 13}, + { -9813, 13, 15}, { -9749, 7, 14}, { -9689, 15, 15}, { -9633, 1, 11}, + { -9580, 17, 15}, { -9531, 9, 14}, { -9484, 19, 15}, { -9439, 5, 13}, + { -9397, 21, 15}, { -9356, 11, 14}, { -9318, 23, 15}, { -9281, 3, 12}, + { -9245, 25, 15}, { -9211, 13, 14}, { -9178, 27, 15}, { -9147, 7, 13}, + { -9116, 29, 15}, { -9087, 15, 14}, { -9058, 31, 15}, { -9031, 1, 10}, + { -8978, 17, 14}, { -8929, 9, 13}, { -8882, 19, 14}, { -8837, 5, 12}, + { -8795, 21, 14}, { -8754, 11, 13}, { -8716, 23, 14}, { -8679, 3, 11}, + { -8643, 25, 14}, { -8609, 13, 13}, { -8576, 27, 14}, { -8545, 7, 12}, + { -8514, 29, 14}, { -8485, 15, 13}, { -8456, 31, 14}, { -8429, 1, 9}, + { -8376, 17, 13}, { -8327, 9, 12}, { -8280, 19, 13}, { -8235, 5, 11}, + { -8193, 21, 13}, { -8152, 11, 12}, { -8114, 23, 13}, { -8077, 3, 10}, + { -8041, 25, 13}, { -8007, 13, 12}, { -7974, 27, 13}, { -7943, 7, 11}, + { -7912, 29, 13}, { -7883, 15, 12}, { -7854, 31, 13}, { -7827, 1, 8}, + { -7774, 17, 12}, { -7724, 9, 11}, { -7678, 19, 12}, { -7633, 5, 10}, + { -7591, 21, 12}, { -7550, 11, 11}, { -7512, 23, 12}, { -7475, 3, 9}, + { -7439, 25, 12}, { -7405, 13, 11}, { -7372, 27, 12}, { -7341, 7, 10}, + { -7310, 29, 12}, { -7281, 15, 11}, { -7252, 31, 12}, { -7225, 1, 7}, + { -7172, 17, 11}, { -7122, 9, 10}, { -7075, 19, 11}, { -7031, 5, 9}, + { -6989, 21, 11}, { -6948, 11, 10}, { -6910, 23, 11}, { -6873, 3, 8}, + { -6837, 25, 11}, { -6803, 13, 10}, { -6770, 27, 11}, { -6739, 7, 9}, + { -6708, 29, 11}, { -6679, 15, 10}, { -6650, 31, 11}, { -6623, 1, 6}, + { -6570, 17, 10}, { -6520, 9, 9}, { -6473, 19, 10}, { -6429, 5, 8}, + { -6386, 21, 10}, { -6346, 11, 9}, { -6307, 23, 10}, { -6270, 3, 7}, + { -6235, 25, 10}, { -6201, 13, 9}, { -6168, 27, 10}, { -6137, 7, 8}, + { -6106, 29, 10}, { -6077, 15, 9}, { -6048, 31, 10}, { -6021, 1, 5}, + { -5968, 17, 9}, { -5918, 9, 8}, { -5871, 19, 9}, { -5827, 5, 7}, + { -5784, 21, 9}, { -5744, 11, 8}, { -5705, 23, 9}, { -5668, 3, 6}, + { -5633, 25, 9}, { -5599, 13, 8}, { -5566, 27, 9}, { -5535, 7, 7}, + { -5504, 29, 9}, { -5475, 15, 8}, { -5446, 31, 9}, { -5419, 1, 4}, + { -5366, 17, 8}, { -5316, 9, 7}, { -5269, 19, 8}, { -5225, 5, 6}, + { -5182, 21, 8}, { -5142, 11, 7}, { -5103, 23, 8}, { -5066, 3, 5}, + { -5031, 25, 8}, { -4997, 13, 7}, { -4964, 27, 8}, { -4932, 7, 6}, + { -4902, 29, 8}, { -4873, 15, 7}, { -4844, 31, 8}, { -4816, 1, 3}, + { -4764, 17, 7}, { -4714, 9, 6}, { -4667, 19, 7}, { -4623, 5, 5}, + { -4580, 21, 7}, { -4540, 11, 6}, { -4501, 23, 7}, { -4464, 3, 4}, + { -4429, 25, 7}, { -4395, 13, 6}, { -4362, 27, 7}, { -4330, 7, 5}, + { -4300, 29, 7}, { -4270, 15, 6}, { -4242, 31, 7}, { -4214, 1, 2}, + { -4162, 17, 6}, { -4112, 9, 5}, { -4065, 19, 6}, { -4021, 5, 4}, + { -3978, 21, 6}, { -3938, 11, 5}, { -3899, 23, 6}, { -3862, 3, 3}, + { -3827, 25, 6}, { -3793, 13, 5}, { -3760, 27, 6}, { -3728, 7, 4}, + { -3698, 29, 6}, { -3668, 15, 5}, { -3640, 31, 6}, { -3612, 1, 1}, + { -3560, 17, 5}, { -3510, 9, 4}, { -3463, 19, 5}, { -3419, 5, 3}, + { -3376, 21, 5}, { -3336, 11, 4}, { -3297, 23, 5}, { -3260, 3, 2}, + { -3225, 25, 5}, { -3191, 13, 4}, { -3158, 27, 5}, { -3126, 7, 3}, + { -3096, 29, 5}, { -3066, 15, 4}, { -3038, 31, 5}, { -3010, 1, 0}, + { -2958, 17, 4}, { -2908, 9, 3}, { -2861, 19, 4}, { -2816, 5, 2}, + { -2774, 21, 4}, { -2734, 11, 3}, { -2695, 23, 4}, { -2658, 3, 1}, + { -2623, 25, 4}, { -2589, 13, 3}, { -2556, 27, 4}, { -2524, 7, 2}, + { -2494, 29, 4}, { -2464, 15, 3}, { -2436, 31, 4}, { -2408, 2, 0}, + { -2356, 17, 3}, { -2306, 9, 2}, { -2259, 19, 3}, { -2214, 5, 1}, + { -2172, 21, 3}, { -2132, 11, 2}, { -2093, 23, 3}, { -2056, 3, 0}, + { -2021, 25, 3}, { -1987, 13, 2}, { -1954, 27, 3}, { -1922, 7, 1}, + { -1892, 29, 3}, { -1862, 15, 2}, { -1834, 31, 3}, { -1806, 4, 0}, + { -1754, 17, 2}, { -1704, 9, 1}, { -1657, 19, 2}, { -1612, 5, 0}, + { -1570, 21, 2}, { -1530, 11, 1}, { -1491, 23, 2}, { -1454, 6, 0}, + { -1419, 25, 2}, { -1384, 13, 1}, { -1352, 27, 2}, { -1320, 7, 0}, + { -1290, 29, 2}, { -1260, 15, 1}, { -1232, 31, 2}, { -1204, 8, 0}, + { -1151, 17, 1}, { -1102, 9, 0}, { -1055, 19, 1}, { -1010, 10, 0}, + { -968, 21, 1}, { -928, 11, 0}, { -889, 23, 1}, { -852, 12, 0}, + { -816, 25, 1}, { -782, 13, 0}, { -750, 27, 1}, { -718, 14, 0}, + { -688, 29, 1}, { -658, 15, 0}, { -630, 31, 1}, { -602, 16, 0}, + { -549, 17, 0}, { -500, 18, 0}, { -453, 19, 0}, { -408, 20, 0}, + { -366, 21, 0}, { -325, 22, 0}, { -287, 23, 0}, { -250, 24, 0}, + { -214, 25, 0}, { -180, 26, 0}, { -148, 27, 0}, { -116, 28, 0}, + { -86, 29, 0}, { -56, 30, 0}, { -28, 31, 0}, { 0, 0, 0}, +}; + +static int pm860x_volatile(unsigned int reg) +{ + BUG_ON(reg >= REG_CACHE_SIZE); + + switch (reg) { + case PM860X_AUDIO_SUPPLIES_2: + return 1; + } + + return 0; +} + +static unsigned int pm860x_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (pm860x_volatile(reg)) + return cache[reg]; + + reg += REG_CACHE_BASE; + + return pm860x_reg_read(codec->control_data, reg); +} + +static int pm860x_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + unsigned char *cache = codec->reg_cache; + + BUG_ON(reg >= REG_CACHE_SIZE); + + if (!pm860x_volatile(reg)) + cache[reg] = (unsigned char)value; + + reg += REG_CACHE_BASE; + + return pm860x_reg_write(codec->control_data, reg, value); +} + +static int snd_soc_get_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int val[2], val2[2], i; + + val[0] = snd_soc_read(codec, reg) & 0x3f; + val[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT) >> 4) & 0xf; + val2[0] = snd_soc_read(codec, reg2) & 0x3f; + val2[1] = (snd_soc_read(codec, PM860X_SIDETONE_SHIFT)) & 0xf; + + for (i = 0; i < ARRAY_SIZE(st_table); i++) { + if ((st_table[i].m == val[0]) && (st_table[i].n == val[1])) + ucontrol->value.integer.value[0] = i; + if ((st_table[i].m == val2[0]) && (st_table[i].n == val2[1])) + ucontrol->value.integer.value[1] = i; + } + return 0; +} + +static int snd_soc_put_volsw_2r_st(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + int err; + unsigned int val, val2; + + val = ucontrol->value.integer.value[0]; + val2 = ucontrol->value.integer.value[1]; + + err = snd_soc_update_bits(codec, reg, 0x3f, st_table[val].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0xf0, + st_table[val].n << 4); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, 0x3f, st_table[val2].m); + if (err < 0) + return err; + err = snd_soc_update_bits(codec, PM860X_SIDETONE_SHIFT, 0x0f, + st_table[val2].n); + return err; +} + +static int snd_soc_get_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max, val, val2; + unsigned int mask = (1 << fls(max)) - 1; + + val = snd_soc_read(codec, reg) >> shift; + val2 = snd_soc_read(codec, reg2) >> shift; + ucontrol->value.integer.value[0] = (max - val) & mask; + ucontrol->value.integer.value[1] = (max - val2) & mask; + + return 0; +} + +static int snd_soc_put_volsw_2r_out(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + unsigned int reg = mc->reg; + unsigned int reg2 = mc->rreg; + unsigned int shift = mc->shift; + int max = mc->max; + unsigned int mask = (1 << fls(max)) - 1; + int err; + unsigned int val, val2, val_mask; + + val_mask = mask << shift; + val = ((max - ucontrol->value.integer.value[0]) & mask); + val2 = ((max - ucontrol->value.integer.value[1]) & mask); + + val = val << shift; + val2 = val2 << shift; + + err = snd_soc_update_bits(codec, reg, val_mask, val); + if (err < 0) + return err; + + err = snd_soc_update_bits(codec, reg2, val_mask, val2); + return err; +} + +/* DAPM Widget Events */ +static int pm860x_rsync_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + /* unmute DAC */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, 0); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int pm860x_adc_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + unsigned int en1 = 0, en2 = 0; + + if (!strcmp(w->name, "Left ADC")) { + en1 = ADC_MOD_LEFT; + en2 = ADC_LEFT; + } + if (!strcmp(w->name, "Right ADC")) { + en1 = ADC_MOD_RIGHT; + en2 = ADC_RIGHT; + } + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, PM860X_ADC_EN_1, en1, en1); + snd_soc_update_bits(codec, PM860X_ADC_EN_2, en2, en2); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, PM860X_ADC_EN_1, en1, 0); + snd_soc_update_bits(codec, PM860X_ADC_EN_2, en2, 0); + break; + } + return 0; +} + +static int pm860x_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + unsigned int dac = 0; + int data; + + if (!strcmp(w->name, "Left DAC")) + dac = DAC_LEFT; + if (!strcmp(w->name, "Right DAC")) + dac = DAC_RIGHT; + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (dac) { + dac |= MODULATOR; + /* mute */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + /* update dac */ + snd_soc_update_bits(codec, PM860X_DAC_EN_2, + dac, dac); + } + break; + case SND_SOC_DAPM_PRE_PMD: + if (dac) { + /* mute */ + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, + DAC_MUTE, DAC_MUTE); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + /* update dac */ + data = snd_soc_read(codec, PM860X_DAC_EN_2); + data &= ~dac; + if (!(data & (DAC_LEFT | DAC_RIGHT))) + data &= ~MODULATOR; + snd_soc_write(codec, PM860X_DAC_EN_2, data); + } + break; + } + return 0; +} + +static int pm860x_mic1_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + /* Enable Mic1 Bias & MICDET, HSDET */ + snd_soc_update_bits(codec, PM860X_ADC_ANA_1, MIC1BIAS_MASK, + MIC1BIAS_MASK); + pm860x_set_bits(codec->control_data, REG_MIC_DET, + MICDET_MASK, MICDET_MASK); + pm860x_set_bits(codec->control_data, REG_HS_DET, + EN_HS_DET, EN_HS_DET); + break; + case SND_SOC_DAPM_PRE_PMD: + /* disable Mic1 Bias & MICDET, HSDET */ + pm860x_set_bits(codec->control_data, REG_MIC_DET, + MICDET_MASK, 0); + pm860x_set_bits(codec->control_data, REG_HS_DET, + EN_HS_DET, 0); + snd_soc_update_bits(codec, PM860X_ADC_ANA_1, MIC1BIAS_MASK, 0); + break; + } + return 0; +} + +static const char *pm860x_opamp_texts[] = {"-50%", "-25%", "0%", "75%"}; + +static const char *pm860x_pa_texts[] = {"-33%", "0%", "33%", "66%"}; + +static const struct soc_enum pm860x_hs1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_hs1_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_hs2_pa_enum = + SOC_ENUM_SINGLE(PM860X_HS2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo1_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo2_opamp_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 5, 4, pm860x_opamp_texts); + +static const struct soc_enum pm860x_lo1_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO1_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_lo2_pa_enum = + SOC_ENUM_SINGLE(PM860X_LO2_CTRL, 3, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 5, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_ear_pa_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_2, 0, 4, pm860x_pa_texts); + +static const struct soc_enum pm860x_spk_ear_opamp_enum = + SOC_ENUM_SINGLE(PM860X_EAR_CTRL_1, 3, 4, pm860x_opamp_texts); + +static const struct snd_kcontrol_new pm860x_snd_controls[] = { + SOC_DOUBLE_R_TLV("ADC Capture Volume", PM860X_ADC_ANA_2, + PM860X_ADC_ANA_3, 6, 3, 0, adc_tlv), + SOC_DOUBLE_TLV("AUX Capture Volume", PM860X_ADC_ANA_3, 0, 3, 7, 0, + aux_tlv), + SOC_SINGLE_TLV("MIC1 Capture Volume", PM860X_ADC_ANA_2, 0, 7, 0, + mic_tlv), + SOC_SINGLE_TLV("MIC3 Capture Volume", PM860X_ADC_ANA_2, 3, 7, 0, + mic_tlv), + SOC_DOUBLE_R_EXT_TLV("Sidetone Volume", PM860X_SIDETONE_L_GAIN, + PM860X_SIDETONE_R_GAIN, 0, ARRAY_SIZE(st_table)-1, + 0, snd_soc_get_volsw_2r_st, + snd_soc_put_volsw_2r_st, st_tlv), + SOC_SINGLE_TLV("Speaker Playback Volume", PM860X_EAR_CTRL_1, + 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Line Playback Volume", PM860X_LO1_CTRL, + PM860X_LO2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_TLV("Headset Playback Volume", PM860X_HS1_CTRL, + PM860X_HS2_CTRL, 0, 7, 0, out_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Left Playback Volume", + PM860X_HIFIL_GAIN_LEFT, + PM860X_HIFIL_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Hifi Right Playback Volume", + PM860X_HIFIR_GAIN_LEFT, + PM860X_HIFIR_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_DOUBLE_R_EXT_TLV("Lofi Playback Volume", PM860X_LOFI_GAIN_LEFT, + PM860X_LOFI_GAIN_RIGHT, 0, 63, 0, + snd_soc_get_volsw_2r_out, + snd_soc_put_volsw_2r_out, dpga_tlv), + SOC_ENUM("Headset1 Operational Amplifier Current", + pm860x_hs1_opamp_enum), + SOC_ENUM("Headset2 Operational Amplifier Current", + pm860x_hs2_opamp_enum), + SOC_ENUM("Headset1 Amplifier Current", pm860x_hs1_pa_enum), + SOC_ENUM("Headset2 Amplifier Current", pm860x_hs2_pa_enum), + SOC_ENUM("Lineout1 Operational Amplifier Current", + pm860x_lo1_opamp_enum), + SOC_ENUM("Lineout2 Operational Amplifier Current", + pm860x_lo2_opamp_enum), + SOC_ENUM("Lineout1 Amplifier Current", pm860x_lo1_pa_enum), + SOC_ENUM("Lineout2 Amplifier Current", pm860x_lo2_pa_enum), + SOC_ENUM("Speaker Operational Amplifier Current", + pm860x_spk_ear_opamp_enum), + SOC_ENUM("Speaker Amplifier Current", pm860x_spk_pa_enum), + SOC_ENUM("Earpiece Amplifier Current", pm860x_ear_pa_enum), +}; + +/* + * DAPM Controls + */ + +/* PCM Switch / PCM Interface */ +static const struct snd_kcontrol_new pcm_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ADC_EN_2, 0, 1, 0); + +/* AUX1 Switch */ +static const struct snd_kcontrol_new aux1_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 4, 1, 0); + +/* AUX2 Switch */ +static const struct snd_kcontrol_new aux2_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_ANA_TO_ANA, 5, 1, 0); + +/* Left Ex. PA Switch */ +static const struct snd_kcontrol_new lepa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 2, 1, 0); + +/* Right Ex. PA Switch */ +static const struct snd_kcontrol_new repa_switch_controls = + SOC_DAPM_SINGLE("Switch", PM860X_DAC_EN_2, 1, 1, 0); + +/* PCM Mux / Mux7 */ +static const char *aif1_text[] = { + "PCM L", "PCM R", +}; + +static const struct soc_enum aif1_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 6, 2, aif1_text); + +static const struct snd_kcontrol_new aif1_mux = + SOC_DAPM_ENUM("PCM Mux", aif1_enum); + +/* I2S Mux / Mux9 */ +static const char *i2s_din_text[] = { + "DIN", "DIN1", +}; + +static const struct soc_enum i2s_din_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 1, 2, i2s_din_text); + +static const struct snd_kcontrol_new i2s_din_mux = + SOC_DAPM_ENUM("I2S DIN Mux", i2s_din_enum); + +/* I2S Mic Mux / Mux8 */ +static const char *i2s_mic_text[] = { + "Ex PA", "ADC", +}; + +static const struct soc_enum i2s_mic_enum = + SOC_ENUM_SINGLE(PM860X_I2S_IFACE_3, 4, 2, i2s_mic_text); + +static const struct snd_kcontrol_new i2s_mic_mux = + SOC_DAPM_ENUM("I2S Mic Mux", i2s_mic_enum); + +/* ADCL Mux / Mux2 */ +static const char *adcl_text[] = { + "ADCR", "ADCL", +}; + +static const struct soc_enum adcl_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 4, 2, adcl_text); + +static const struct snd_kcontrol_new adcl_mux = + SOC_DAPM_ENUM("ADC Left Mux", adcl_enum); + +/* ADCR Mux / Mux3 */ +static const char *adcr_text[] = { + "ADCL", "ADCR", +}; + +static const struct soc_enum adcr_enum = + SOC_ENUM_SINGLE(PM860X_PCM_IFACE_3, 2, 2, adcr_text); + +static const struct snd_kcontrol_new adcr_mux = + SOC_DAPM_ENUM("ADC Right Mux", adcr_enum); + +/* ADCR EC Mux / Mux6 */ +static const char *adcr_ec_text[] = { + "ADCR", "EC", +}; + +static const struct soc_enum adcr_ec_enum = + SOC_ENUM_SINGLE(PM860X_ADC_EN_2, 3, 2, adcr_ec_text); + +static const struct snd_kcontrol_new adcr_ec_mux = + SOC_DAPM_ENUM("ADCR EC Mux", adcr_ec_enum); + +/* EC Mux / Mux4 */ +static const char *ec_text[] = { + "Left", "Right", "Left + Right", +}; + +static const struct soc_enum ec_enum = + SOC_ENUM_SINGLE(PM860X_EC_PATH, 1, 3, ec_text); + +static const struct snd_kcontrol_new ec_mux = + SOC_DAPM_ENUM("EC Mux", ec_enum); + +static const char *dac_text[] = { + "No input", "Right", "Left", "No input", +}; + +/* DAC Headset 1 Mux / Mux10 */ +static const struct soc_enum dac_hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs1_mux = + SOC_DAPM_ENUM("DAC HS1 Mux", dac_hs1_enum); + +/* DAC Headset 2 Mux / Mux11 */ +static const struct soc_enum dac_hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 2, 4, dac_text); + +static const struct snd_kcontrol_new dac_hs2_mux = + SOC_DAPM_ENUM("DAC HS2 Mux", dac_hs2_enum); + +/* DAC Lineout 1 Mux / Mux12 */ +static const struct soc_enum dac_lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 4, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo1_mux = + SOC_DAPM_ENUM("DAC LO1 Mux", dac_lo1_enum); + +/* DAC Lineout 2 Mux / Mux13 */ +static const struct soc_enum dac_lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_1, 6, 4, dac_text); + +static const struct snd_kcontrol_new dac_lo2_mux = + SOC_DAPM_ENUM("DAC LO2 Mux", dac_lo2_enum); + +/* DAC Spearker Earphone Mux / Mux14 */ +static const struct soc_enum dac_spk_ear_enum = + SOC_ENUM_SINGLE(PM860X_ANA_INPUT_SEL_2, 0, 4, dac_text); + +static const struct snd_kcontrol_new dac_spk_ear_mux = + SOC_DAPM_ENUM("DAC SP Mux", dac_spk_ear_enum); + +/* Headset 1 Mux / Mux15 */ +static const char *in_text[] = { + "Digital", "Analog", +}; + +static const struct soc_enum hs1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 0, 2, in_text); + +static const struct snd_kcontrol_new hs1_mux = + SOC_DAPM_ENUM("Headset1 Mux", hs1_enum); + +/* Headset 2 Mux / Mux16 */ +static const struct soc_enum hs2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 1, 2, in_text); + +static const struct snd_kcontrol_new hs2_mux = + SOC_DAPM_ENUM("Headset2 Mux", hs2_enum); + +/* Lineout 1 Mux / Mux17 */ +static const struct soc_enum lo1_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 2, 2, in_text); + +static const struct snd_kcontrol_new lo1_mux = + SOC_DAPM_ENUM("Lineout1 Mux", lo1_enum); + +/* Lineout 2 Mux / Mux18 */ +static const struct soc_enum lo2_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 3, 2, in_text); + +static const struct snd_kcontrol_new lo2_mux = + SOC_DAPM_ENUM("Lineout2 Mux", lo2_enum); + +/* Speaker Earpiece Demux */ +static const char *spk_text[] = { + "Earpiece", "Speaker", +}; + +static const struct soc_enum spk_enum = + SOC_ENUM_SINGLE(PM860X_ANA_TO_ANA, 6, 2, spk_text); + +static const struct snd_kcontrol_new spk_demux = + SOC_DAPM_ENUM("Speaker Earpiece Demux", spk_enum); + +/* MIC Mux / Mux1 */ +static const char *mic_text[] = { + "Mic 1", "Mic 2", +}; + +static const struct soc_enum mic_enum = + SOC_ENUM_SINGLE(PM860X_ADC_ANA_4, 4, 2, mic_text); + +static const struct snd_kcontrol_new mic_mux = + SOC_DAPM_ENUM("MIC Mux", mic_enum); + +static const struct snd_soc_dapm_widget pm860x_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("PCM SDI", "PCM Playback", 0, + PM860X_ADC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("PCM SDO", "PCM Capture", 0, + PM860X_PCM_IFACE_3, 1, 1), + + + SND_SOC_DAPM_AIF_IN("I2S DIN", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_IN("I2S DIN1", "I2S Playback", 0, + PM860X_DAC_EN_2, 0, 0), + SND_SOC_DAPM_AIF_OUT("I2S DOUT", "I2S Capture", 0, + PM860X_I2S_IFACE_3, 5, 1), + SND_SOC_DAPM_MUX("I2S Mic Mux", SND_SOC_NOPM, 0, 0, &i2s_mic_mux), + SND_SOC_DAPM_MUX("ADC Left Mux", SND_SOC_NOPM, 0, 0, &adcl_mux), + SND_SOC_DAPM_MUX("ADC Right Mux", SND_SOC_NOPM, 0, 0, &adcr_mux), + SND_SOC_DAPM_MUX("EC Mux", SND_SOC_NOPM, 0, 0, &ec_mux), + SND_SOC_DAPM_MUX("ADCR EC Mux", SND_SOC_NOPM, 0, 0, &adcr_ec_mux), + SND_SOC_DAPM_SWITCH("Left EPA", SND_SOC_NOPM, 0, 0, + &lepa_switch_controls), + SND_SOC_DAPM_SWITCH("Right EPA", SND_SOC_NOPM, 0, 0, + &repa_switch_controls), + + SND_SOC_DAPM_ADC_E("Left ADC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_adc_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_ADC_E("Right ADC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_adc_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_SWITCH("AUX1 Switch", SND_SOC_NOPM, 0, 0, + &aux1_switch_controls), + SND_SOC_DAPM_SWITCH("AUX2 Switch", SND_SOC_NOPM, 0, 0, + &aux2_switch_controls), + + SND_SOC_DAPM_MUX("MIC Mux", SND_SOC_NOPM, 0, 0, &mic_mux), + SND_SOC_DAPM_MICBIAS_E("Mic1 Bias", SND_SOC_NOPM, 0, 0, + &pm860x_mic1_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_MICBIAS("Mic3 Bias", PM860X_ADC_ANA_1, 7, 0), + SND_SOC_DAPM_PGA("MIC1 Volume", PM860X_ADC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("MIC3 Volume", PM860X_ADC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX1 Volume", PM860X_ADC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX2 Volume", PM860X_ADC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("Sidetone PGA", PM860X_ADC_EN_2, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lofi PGA", PM860X_ADC_EN_2, 2, 0, NULL, 0), + + SND_SOC_DAPM_INPUT("AUX1"), + SND_SOC_DAPM_INPUT("AUX2"), + SND_SOC_DAPM_INPUT("MIC1P"), + SND_SOC_DAPM_INPUT("MIC1N"), + SND_SOC_DAPM_INPUT("MIC2P"), + SND_SOC_DAPM_INPUT("MIC2N"), + SND_SOC_DAPM_INPUT("MIC3P"), + SND_SOC_DAPM_INPUT("MIC3N"), + + SND_SOC_DAPM_DAC_E("Left DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_DAC_E("Right DAC", NULL, SND_SOC_NOPM, 0, 0, + pm860x_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_MUX("I2S DIN Mux", SND_SOC_NOPM, 0, 0, &i2s_din_mux), + SND_SOC_DAPM_MUX("DAC HS1 Mux", SND_SOC_NOPM, 0, 0, &dac_hs1_mux), + SND_SOC_DAPM_MUX("DAC HS2 Mux", SND_SOC_NOPM, 0, 0, &dac_hs2_mux), + SND_SOC_DAPM_MUX("DAC LO1 Mux", SND_SOC_NOPM, 0, 0, &dac_lo1_mux), + SND_SOC_DAPM_MUX("DAC LO2 Mux", SND_SOC_NOPM, 0, 0, &dac_lo2_mux), + SND_SOC_DAPM_MUX("DAC SP Mux", SND_SOC_NOPM, 0, 0, &dac_spk_ear_mux), + SND_SOC_DAPM_MUX("Headset1 Mux", SND_SOC_NOPM, 0, 0, &hs1_mux), + SND_SOC_DAPM_MUX("Headset2 Mux", SND_SOC_NOPM, 0, 0, &hs2_mux), + SND_SOC_DAPM_MUX("Lineout1 Mux", SND_SOC_NOPM, 0, 0, &lo1_mux), + SND_SOC_DAPM_MUX("Lineout2 Mux", SND_SOC_NOPM, 0, 0, &lo2_mux), + SND_SOC_DAPM_MUX("Speaker Earpiece Demux", SND_SOC_NOPM, 0, 0, + &spk_demux), + + + SND_SOC_DAPM_PGA("Headset1 PGA", PM860X_DAC_EN_1, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("Headset2 PGA", PM860X_DAC_EN_1, 1, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("HS1"), + SND_SOC_DAPM_OUTPUT("HS2"), + SND_SOC_DAPM_PGA("Lineout1 PGA", PM860X_DAC_EN_1, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA("Lineout2 PGA", PM860X_DAC_EN_1, 3, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LINEOUT1"), + SND_SOC_DAPM_OUTPUT("LINEOUT2"), + SND_SOC_DAPM_PGA("Earpiece PGA", PM860X_DAC_EN_1, 4, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("EARP"), + SND_SOC_DAPM_OUTPUT("EARN"), + SND_SOC_DAPM_PGA("Speaker PGA", PM860X_DAC_EN_1, 5, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LSP"), + SND_SOC_DAPM_OUTPUT("LSN"), + SND_SOC_DAPM_REG(snd_soc_dapm_supply, "VCODEC", PM860X_AUDIO_SUPPLIES_2, + 0, SUPPLY_MASK, SUPPLY_MASK, 0), + + SND_SOC_DAPM_POST("RSYNC", pm860x_rsync_event), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* supply */ + {"Left DAC", NULL, "VCODEC"}, + {"Right DAC", NULL, "VCODEC"}, + {"Left ADC", NULL, "VCODEC"}, + {"Right ADC", NULL, "VCODEC"}, + + /* PCM/AIF1 Inputs */ + {"PCM SDO", NULL, "ADC Left Mux"}, + {"PCM SDO", NULL, "ADCR EC Mux"}, + + /* PCM/AFI2 Outputs */ + {"Lofi PGA", NULL, "PCM SDI"}, + {"Lofi PGA", NULL, "Sidetone PGA"}, + {"Left DAC", NULL, "Lofi PGA"}, + {"Right DAC", NULL, "Lofi PGA"}, + + /* I2S/AIF2 Inputs */ + {"MIC Mux", "Mic 1", "MIC1P"}, + {"MIC Mux", "Mic 1", "MIC1N"}, + {"MIC Mux", "Mic 2", "MIC2P"}, + {"MIC Mux", "Mic 2", "MIC2N"}, + {"MIC1 Volume", NULL, "MIC Mux"}, + {"MIC3 Volume", NULL, "MIC3P"}, + {"MIC3 Volume", NULL, "MIC3N"}, + {"Left ADC", NULL, "MIC1 Volume"}, + {"Right ADC", NULL, "MIC3 Volume"}, + {"ADC Left Mux", "ADCR", "Right ADC"}, + {"ADC Left Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCL", "Left ADC"}, + {"ADC Right Mux", "ADCR", "Right ADC"}, + {"Left EPA", "Switch", "Left DAC"}, + {"Right EPA", "Switch", "Right DAC"}, + {"EC Mux", "Left", "Left DAC"}, + {"EC Mux", "Right", "Right DAC"}, + {"EC Mux", "Left + Right", "Left DAC"}, + {"EC Mux", "Left + Right", "Right DAC"}, + {"ADCR EC Mux", "ADCR", "ADC Right Mux"}, + {"ADCR EC Mux", "EC", "EC Mux"}, + {"I2S Mic Mux", "Ex PA", "Left EPA"}, + {"I2S Mic Mux", "Ex PA", "Right EPA"}, + {"I2S Mic Mux", "ADC", "ADC Left Mux"}, + {"I2S Mic Mux", "ADC", "ADCR EC Mux"}, + {"I2S DOUT", NULL, "I2S Mic Mux"}, + + /* I2S/AIF2 Outputs */ + {"I2S DIN Mux", "DIN", "I2S DIN"}, + {"I2S DIN Mux", "DIN1", "I2S DIN1"}, + {"Left DAC", NULL, "I2S DIN Mux"}, + {"Right DAC", NULL, "I2S DIN Mux"}, + {"DAC HS1 Mux", "Left", "Left DAC"}, + {"DAC HS1 Mux", "Right", "Right DAC"}, + {"DAC HS2 Mux", "Left", "Left DAC"}, + {"DAC HS2 Mux", "Right", "Right DAC"}, + {"DAC LO1 Mux", "Left", "Left DAC"}, + {"DAC LO1 Mux", "Right", "Right DAC"}, + {"DAC LO2 Mux", "Left", "Left DAC"}, + {"DAC LO2 Mux", "Right", "Right DAC"}, + {"Headset1 Mux", "Digital", "DAC HS1 Mux"}, + {"Headset2 Mux", "Digital", "DAC HS2 Mux"}, + {"Lineout1 Mux", "Digital", "DAC LO1 Mux"}, + {"Lineout2 Mux", "Digital", "DAC LO2 Mux"}, + {"Headset1 PGA", NULL, "Headset1 Mux"}, + {"Headset2 PGA", NULL, "Headset2 Mux"}, + {"Lineout1 PGA", NULL, "Lineout1 Mux"}, + {"Lineout2 PGA", NULL, "Lineout2 Mux"}, + {"DAC SP Mux", "Left", "Left DAC"}, + {"DAC SP Mux", "Right", "Right DAC"}, + {"Speaker Earpiece Demux", "Speaker", "DAC SP Mux"}, + {"Speaker PGA", NULL, "Speaker Earpiece Demux"}, + {"Earpiece PGA", NULL, "Speaker Earpiece Demux"}, + + {"HS1", NULL, "Headset1 PGA"}, + {"HS2", NULL, "Headset2 PGA"}, + {"LINEOUT1", NULL, "Lineout1 PGA"}, + {"LINEOUT2", NULL, "Lineout2 PGA"}, + {"LSP", NULL, "Speaker PGA"}, + {"LSN", NULL, "Speaker PGA"}, + {"EARP", NULL, "Earpiece PGA"}, + {"EARN", NULL, "Earpiece PGA"}, +}; + +static int pm860x_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int data = 0; + + if (mute) + data = DAC_MUTE; + snd_soc_update_bits(codec, PM860X_DAC_OFFSET, DAC_MUTE, data); + snd_soc_update_bits(codec, PM860X_EAR_CTRL_2, + RSYNC_CHANGE, RSYNC_CHANGE); + return 0; +} + +static int set_dai_fmt(struct pm860x_priv *pm860x, unsigned int fmt, + unsigned char *inf, unsigned char *mask) +{ + *mask |= PCM_INF2_BCLK | PCM_INF2_FS | PCM_INF2_MASTER; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + if (pm860x->dir == PM860X_CLK_DIR_OUT) + *inf |= PCM_INF2_MASTER; + else + return -EINVAL; + break; + case SND_SOC_DAIFMT_CBS_CFS: + if (pm860x->dir == PM860X_CLK_DIR_IN) + *inf &= ~PCM_INF2_MASTER; + else + return -EINVAL; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + *inf |= PCM_EXACT_I2S; + break; + default: + return -EINVAL; + } + *mask |= PCM_MODE_MASK; + return 0; +} + +static int pm860x_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf = 0, mask = 0; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf &= ~PCM_INF2_18WL; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf |= PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + mask |= PCM_INF2_18WL; + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 16000: + inf = 3; + break; + case 32000: + inf = 6; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_PCM_RATE, 0x0f, inf); + + return 0; +} + +static int pm860x_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int ret; + + ret = set_dai_fmt(pm860x, fmt, &inf, &mask); + if (!ret) + snd_soc_update_bits(codec, PM860X_PCM_IFACE_2, mask, inf); + return ret; +} + +static int pm860x_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + + if (dir == PM860X_CLK_DIR_OUT) + pm860x->dir = PM860X_CLK_DIR_OUT; + else + pm860x->dir = PM860X_CLK_DIR_IN; + + return 0; +} + +static int pm860x_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + unsigned char inf; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + inf = 0; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + inf = PCM_INF2_18WL; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, PCM_INF2_18WL, inf); + + /* sample rate */ + switch (params_rate(params)) { + case 8000: + inf = 0; + break; + case 11025: + inf = 1; + break; + case 16000: + inf = 3; + break; + case 22050: + inf = 4; + break; + case 32000: + inf = 6; + break; + case 44100: + inf = 7; + break; + case 48000: + inf = 8; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, PM860X_I2S_IFACE_4, 0xf, inf); + + return 0; +} + +static int pm860x_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + unsigned char inf = 0, mask = 0; + int ret; + + ret = set_dai_fmt(pm860x, fmt, &inf, &mask); + if (!ret) + snd_soc_update_bits(codec, PM860X_I2S_IFACE_2, mask, inf); + return ret; +} + +static int pm860x_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int data; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Enable Audio PLL & Audio section */ + data = AUDIO_PLL | AUDIO_SECTION_RESET + | AUDIO_SECTION_ON; + pm860x_reg_write(codec->control_data, REG_MISC2, data); + } + break; + + case SND_SOC_BIAS_OFF: + data = AUDIO_PLL | AUDIO_SECTION_RESET | AUDIO_SECTION_ON; + pm860x_set_bits(codec->control_data, REG_MISC2, data, 0); + break; + } + codec->bias_level = level; + return 0; +} + +static struct snd_soc_dai_ops pm860x_pcm_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_pcm_hw_params, + .set_fmt = pm860x_pcm_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +static struct snd_soc_dai_ops pm860x_i2s_dai_ops = { + .digital_mute = pm860x_digital_mute, + .hw_params = pm860x_i2s_hw_params, + .set_fmt = pm860x_i2s_set_dai_fmt, + .set_sysclk = pm860x_set_dai_sysclk, +}; + +#define PM860X_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000) + +static struct snd_soc_dai_driver pm860x_dai[] = { + { + /* DAI PCM */ + .name = "88pm860x-pcm", + .id = 1, + .playback = { + .stream_name = "PCM Playback", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "PCM Capture", + .channels_min = 2, + .channels_max = 2, + .rates = PM860X_RATES, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_pcm_dai_ops, + }, { + /* DAI I2S */ + .name = "88pm860x-i2s", + .id = 2, + .playback = { + .stream_name = "I2S Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .capture = { + .stream_name = "I2S Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FORMAT_S16_LE | \ + SNDRV_PCM_FORMAT_S18_3LE, + }, + .ops = &pm860x_i2s_dai_ops, + }, +}; + +static irqreturn_t pm860x_codec_handler(int irq, void *data) +{ + struct pm860x_priv *pm860x = data; + int status, shrt, report = 0; + + status = pm860x_reg_read(pm860x->i2c, REG_STATUS_1); + shrt = pm860x_reg_read(pm860x->i2c, REG_SHORTS); + + if (status & HEADSET_STATUS) + report |= PM860X_DET_HEADSET; + if (status & MIC_STATUS) + report |= PM860X_DET_MIC; + if (status & HOOK_STATUS) + report |= PM860X_DET_HOOK; + if (shrt & (SHORT_LO1 | SHORT_LO2)) + report |= PM860X_SHORT_LINEOUT; + if (shrt & (SHORT_HS1 | SHORT_HS2)) + report |= PM860X_SHORT_HEADSET; + dev_dbg(pm860x->codec->dev, "report:0x%x\n", report); + return IRQ_HANDLED; +} + +static int pm860x_probe(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i, ret; + + pm860x->codec = codec; + + codec->control_data = pm860x->i2c; + + for (i = 0; i < 4; i++) { + ret = request_threaded_irq(pm860x->irq[i], NULL, + pm860x_codec_handler, IRQF_ONESHOT, + pm860x->name[i], pm860x); + if (ret < 0) { + dev_err(codec->dev, "Failed to request IRQ!\n"); + goto out_irq; + } + } + + pm860x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + ret = pm860x_bulk_read(codec->control_data, REG_CACHE_BASE, + REG_CACHE_SIZE, codec->reg_cache); + if (ret < 0) { + dev_err(codec->dev, "Failed to fill register cache: %d\n", + ret); + goto out_codec; + } + + snd_soc_add_controls(codec, pm860x_snd_controls, + ARRAY_SIZE(pm860x_snd_controls)); + snd_soc_dapm_new_controls(codec, pm860x_dapm_widgets, + ARRAY_SIZE(pm860x_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + return 0; + +out_codec: + i = 3; +out_irq: + for (; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + return -EINVAL; +} + +static int pm860x_remove(struct snd_soc_codec *codec) +{ + struct pm860x_priv *pm860x = snd_soc_codec_get_drvdata(codec); + int i; + + for (i = 3; i >= 0; i--) + free_irq(pm860x->irq[i], pm860x); + pm860x_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_pm860x = { + .probe = pm860x_probe, + .remove = pm860x_remove, + .read = pm860x_read_reg_cache, + .write = pm860x_write_reg_cache, + .reg_cache_size = REG_CACHE_SIZE, + .reg_word_size = sizeof(u8), + .set_bias_level = pm860x_set_bias_level, +}; + +static int __devinit pm860x_codec_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_priv *pm860x; + struct resource *res; + int i, ret; + + pm860x = kzalloc(sizeof(struct pm860x_priv), GFP_KERNEL); + if (pm860x == NULL) + return -ENOMEM; + + pm860x->chip = chip; + pm860x->i2c = (chip->id == CHIP_PM8607) ? chip->client + : chip->companion; + platform_set_drvdata(pdev, pm860x); + + for (i = 0; i < 4; i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + if (!res) { + dev_err(&pdev->dev, "Failed to get IRQ resources\n"); + goto out; + } + pm860x->irq[i] = res->start + chip->irq_base; + strncpy(pm860x->name[i], res->name, MAX_NAME_LEN); + } + + ret = snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pm860x, + pm860x_dai, ARRAY_SIZE(pm860x_dai)); + if (ret) { + dev_err(&pdev->dev, "Failed to register codec\n"); + goto out; + } + return ret; + +out: + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return -EINVAL; +} + +static int __devexit pm860x_codec_remove(struct platform_device *pdev) +{ + struct pm860x_priv *pm860x = platform_get_drvdata(pdev); + + snd_soc_unregister_codec(&pdev->dev); + platform_set_drvdata(pdev, NULL); + kfree(pm860x); + return 0; +} + +static struct platform_driver pm860x_codec_driver = { + .driver = { + .name = "88pm860x-codec", + .owner = THIS_MODULE, + }, + .probe = pm860x_codec_probe, + .remove = __devexit_p(pm860x_codec_remove), +}; + +static __init int pm860x_init(void) +{ + return platform_driver_register(&pm860x_codec_driver); +} +module_init(pm860x_init); + +static __exit void pm860x_exit(void) +{ + platform_driver_unregister(&pm860x_codec_driver); +} +module_exit(pm860x_exit); + +MODULE_DESCRIPTION("ASoC 88PM860x driver"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang(a)marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-codec"); + diff --git a/sound/soc/codecs/88pm860x-codec.h b/sound/soc/codecs/88pm860x-codec.h new file mode 100644 index 0000000..b034de2 --- /dev/null +++ b/sound/soc/codecs/88pm860x-codec.h @@ -0,0 +1,92 @@ +/* + * 88pm860x-codec.h -- 88PM860x ALSA SoC Audio Driver + * + * Copyright 2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang(a)marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __88PM860X_H +#define __88PM860X_H + +/* The offset of these registers are 0xb0 */ +#define PM860X_PCM_IFACE_1 0x00 +#define PM860X_PCM_IFACE_2 0x01 +#define PM860X_PCM_IFACE_3 0x02 +#define PM860X_PCM_RATE 0x03 +#define PM860X_EC_PATH 0x04 +#define PM860X_SIDETONE_L_GAIN 0x05 +#define PM860X_SIDETONE_R_GAIN 0x06 +#define PM860X_SIDETONE_SHIFT 0x07 +#define PM860X_ADC_OFFSET_1 0x08 +#define PM860X_ADC_OFFSET_2 0x09 +#define PM860X_DMIC_DELAY 0x0a + +#define PM860X_I2S_IFACE_1 0x0b +#define PM860X_I2S_IFACE_2 0x0c +#define PM860X_I2S_IFACE_3 0x0d +#define PM860X_I2S_IFACE_4 0x0e +#define PM860X_EQUALIZER_N0_1 0x0f +#define PM860X_EQUALIZER_N0_2 0x10 +#define PM860X_EQUALIZER_N1_1 0x11 +#define PM860X_EQUALIZER_N1_2 0x12 +#define PM860X_EQUALIZER_D1_1 0x13 +#define PM860X_EQUALIZER_D1_2 0x14 +#define PM860X_LOFI_GAIN_LEFT 0x15 +#define PM860X_LOFI_GAIN_RIGHT 0x16 +#define PM860X_HIFIL_GAIN_LEFT 0x17 +#define PM860X_HIFIL_GAIN_RIGHT 0x18 +#define PM860X_HIFIR_GAIN_LEFT 0x19 +#define PM860X_HIFIR_GAIN_RIGHT 0x1a +#define PM860X_DAC_OFFSET 0x1b +#define PM860X_OFFSET_LEFT_1 0x1c +#define PM860X_OFFSET_LEFT_2 0x1d +#define PM860X_OFFSET_RIGHT_1 0x1e +#define PM860X_OFFSET_RIGHT_2 0x1f +#define PM860X_ADC_ANA_1 0x20 +#define PM860X_ADC_ANA_2 0x21 +#define PM860X_ADC_ANA_3 0x22 +#define PM860X_ADC_ANA_4 0x23 +#define PM860X_ANA_TO_ANA 0x24 +#define PM860X_HS1_CTRL 0x25 +#define PM860X_HS2_CTRL 0x26 +#define PM860X_LO1_CTRL 0x27 +#define PM860X_LO2_CTRL 0x28 +#define PM860X_EAR_CTRL_1 0x29 +#define PM860X_EAR_CTRL_2 0x2a +#define PM860X_AUDIO_SUPPLIES_1 0x2b +#define PM860X_AUDIO_SUPPLIES_2 0x2c +#define PM860X_ADC_EN_1 0x2d +#define PM860X_ADC_EN_2 0x2e +#define PM860X_DAC_EN_1 0x2f +#define PM860X_DAC_EN_2 0x31 +#define PM860X_AUDIO_CAL_1 0x32 +#define PM860X_AUDIO_CAL_2 0x33 +#define PM860X_AUDIO_CAL_3 0x34 +#define PM860X_AUDIO_CAL_4 0x35 +#define PM860X_AUDIO_CAL_5 0x36 +#define PM860X_ANA_INPUT_SEL_1 0x37 +#define PM860X_ANA_INPUT_SEL_2 0x38 + +#define PM860X_PCM_IFACE_4 0x39 +#define PM860X_I2S_IFACE_5 0x3a + +#define PM860X_SHORTS 0x3b +#define PM860X_PLL_ADJ_1 0x3c +#define PM860X_PLL_ADJ_2 0x3d + +/* bits definition */ +#define PM860X_CLK_DIR_IN 0 +#define PM860X_CLK_DIR_OUT 1 + +#define PM860X_DET_HEADSET (1 << 0) +#define PM860X_DET_MIC (1 << 1) +#define PM860X_DET_HOOK (1 << 2) +#define PM860X_SHORT_HEADSET (1 << 3) +#define PM860X_SHORT_LINEOUT (1 << 4) +#define PM860X_DET_MASK 0x1F + +#endif /* __88PM860X_H */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index bfdd92b..a3cfc18 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -10,6 +10,7 @@ config SND_SOC_I2C_AND_SPI config SND_SOC_ALL_CODECS tristate "Build all ASoC CODEC drivers" + select SND_SOC_88PM860X if MFD_88PM860X select SND_SOC_L3 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS select SND_SOC_AD1836 if SPI_MASTER @@ -85,6 +86,9 @@ config SND_SOC_ALL_CODECS If unsure select "N". +config SND_SOC_88PM860X + tristate + config SND_SOC_WM_HUBS tristate default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 9c3c39f..b9c4358 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,3 +1,4 @@ +snd-soc-88pm860x-objs := 88pm860x-codec.o snd-soc-ac97-objs := ac97.o snd-soc-ad1836-objs := ad1836.o snd-soc-ad193x-objs := ad193x.o @@ -67,6 +68,7 @@ snd-soc-tpa6130a2-objs := tpa6130a2.o snd-soc-wm2000-objs := wm2000.o snd-soc-wm9090-objs := wm9090.o +obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o -- 1.5.6.5 --0016e6d63f44021a1f048e002b69 Content-Type: text/x-patch; charset=US-ASCII; name="0001-ASoC-add-88pm860x-codec-driver.patch" Content-Disposition: attachment; filename="0001-ASoC-add-88pm860x-codec-driver.patch" Content-Transfer-Encoding: base64 X-Attachment-Id: f_gcyfxo2w0 RnJvbSBjMDBjZmU3NDU2MjQyYWNjY2I1NjFiYzVhMTY4MzAwMTU4ZWNkNGE0IE1vbiBTZXAgMTcg MDA6MDA6MDAgMjAwMQpGcm9tOiBIYW9qaWFuIFpodWFuZyA8aGFvamlhbi56aHVhbmdAbWFydmVs bC5jb20+CkRhdGU6IFRodSwgMTIgQXVnIDIwMTAgMTI6MDE6NDcgKzA4MDAKU3ViamVjdDogW1BB VENIIDEvM10gQVNvQzogYWRkIDg4cG04NjB4IGNvZGVjIGRyaXZlcgoKQWRkIDg4UE04NjB4IGNv ZGVjIGRyaXZlci4gODhQTTg2MHggY29kZWMgc3VwcG9ydHMgdHdvIGludGVyZmFjZXMuIEFuZCBp dAphbHNvIHN1cHBvcnRzIGhlYWRzZXQvbWljL2hvb2svc2hvcnQgZGV0ZWN0aW9uLgoKU2lnbmVk LW9mZi1ieTogSGFvamlhbiBaaHVhbmcgPGhhb2ppYW4uemh1YW5nQG1hcnZlbGwuY29tPgotLS0K IHNvdW5kL3NvYy9jb2RlY3MvODhwbTg2MHgtY29kZWMuYyB8IDE0MTAgKysrKysrKysrKysrKysr KysrKysrKysrKysrKysrKysrKysrKwogc291bmQvc29jL2NvZGVjcy84OHBtODYweC1jb2RlYy5o IHwgICA5MiArKysKIHNvdW5kL3NvYy9jb2RlY3MvS2NvbmZpZyAgICAgICAgICB8ICAgIDQgKwog c291bmQvc29jL2NvZGVjcy9NYWtlZmlsZSAgICAgICAgIHwgICAgMiArCiA0IGZpbGVzIGNoYW5n ZWQsIDE1MDggaW5zZXJ0aW9ucygrKSwgMCBkZWxldGlvbnMoLSkKIGNyZWF0ZSBtb2RlIDEwMDY0 NCBzb3VuZC9zb2MvY29kZWNzLzg4cG04NjB4LWNvZGVjLmMKIGNyZWF0ZSBtb2RlIDEwMDY0NCBz b3VuZC9zb2MvY29kZWNzLzg4cG04NjB4LWNvZGVjLmgKCmRpZmYgLS1naXQgYS9zb3VuZC9zb2Mv Y29kZWNzLzg4cG04NjB4LWNvZGVjLmMgYi9zb3VuZC9zb2MvY29kZWNzLzg4cG04NjB4LWNvZGVj LmMKbmV3IGZpbGUgbW9kZSAxMDA2NDQKaW5kZXggMDAwMDAwMC4uMWFjYjFmMQotLS0gL2Rldi9u dWxsCisrKyBiL3NvdW5kL3NvYy9jb2RlY3MvODhwbTg2MHgtY29kZWMuYwpAQCAtMCwwICsxLDE0 MTAgQEAKKy8qCisgKiA4OHBtODYweC1jb2RlYy5jIC0tIDg4UE04NjB4IEFMU0EgU29DIEF1ZGlv IERyaXZlcgorICoKKyAqIENvcHlyaWdodCAyMDEwIE1hcnZlbGwgSW50ZXJuYXRpb25hbCBMdGQu CisgKiBBdXRob3I6IEhhb2ppYW4gWmh1YW5nIDxoYW9qaWFuLnpodWFuZ0BtYXJ2ZWxsLmNvbT4K KyAqCisgKiBUaGlzIHByb2dyYW0gaXMgZnJlZSBzb2Z0d2FyZTsgeW91IGNhbiByZWRpc3RyaWJ1 dGUgaXQgYW5kL29yIG1vZGlmeQorICogaXQgdW5kZXIgdGhlIHRlcm1zIG9mIHRoZSBHTlUgR2Vu ZXJhbCBQdWJsaWMgTGljZW5zZSB2ZXJzaW9uIDIgYXMKKyAqIHB1Ymxpc2hlZCBieSB0aGUgRnJl ZSBTb2Z0d2FyZSBGb3VuZGF0aW9uLgorICovCisKKyNpbmNsdWRlIDxsaW51eC9rZXJuZWwuaD4K KyNpbmNsdWRlIDxsaW51eC9tb2R1bGUuaD4KKyNpbmNsdWRlIDxsaW51eC9pMmMuaD4KKyNpbmNs dWRlIDxsaW51eC9wbGF0Zm9ybV9kZXZpY2UuaD4KKyNpbmNsdWRlIDxsaW51eC9tZmQvODhwbTg2 MHguaD4KKyNpbmNsdWRlIDxsaW51eC9zbGFiLmg+CisjaW5jbHVkZSA8c291bmQvY29yZS5oPgor I2luY2x1ZGUgPHNvdW5kL3BjbS5oPgorI2luY2x1ZGUgPHNvdW5kL3BjbV9wYXJhbXMuaD4KKyNp bmNsdWRlIDxzb3VuZC9zb2MuaD4KKyNpbmNsdWRlIDxzb3VuZC9zb2MtZGFwbS5oPgorI2luY2x1 ZGUgPHNvdW5kL3Rsdi5oPgorI2luY2x1ZGUgPHNvdW5kL2luaXR2YWwuaD4KKworI2luY2x1ZGUg Ijg4cG04NjB4LWNvZGVjLmgiCisKKyNkZWZpbmUgTUFYX05BTUVfTEVOCQkyMAorI2RlZmluZSBS RUdfQ0FDSEVfU0laRQkJMHg0MAorI2RlZmluZSBSRUdfQ0FDSEVfQkFTRQkJMHhiMAorCisvKiBT dGF0dXMgUmVnaXN0ZXIgMSAoMHgwMSkgKi8KKyNkZWZpbmUgUkVHX1NUQVRVU18xCQkweDAxCisj ZGVmaW5lIE1JQ19TVEFUVVMJCSgxIDw8IDcpCisjZGVmaW5lIEhPT0tfU1RBVFVTCQkoMSA8PCA2 KQorI2RlZmluZSBIRUFEU0VUX1NUQVRVUwkJKDEgPDwgNSkKKworLyogTWljIERldGVjdGlvbiBS ZWdpc3RlciAoMHgzNykgKi8KKyNkZWZpbmUgUkVHX01JQ19ERVQJCTB4MzcKKyNkZWZpbmUgQ09O VElOVU9VU19QT0xMSU5HCSgzIDw8IDEpCisjZGVmaW5lIEVOX01JQ19ERVQJCSgxIDw8IDApCisj ZGVmaW5lIE1JQ0RFVF9NQVNLCQkweDA3CisKKy8qIEhlYWRzZXQgRGV0ZWN0aW9uIFJlZ2lzdGVy ICgweDM4KSAqLworI2RlZmluZSBSRUdfSFNfREVUCQkweDM4CisjZGVmaW5lIEVOX0hTX0RFVAkJ KDEgPDwgMCkKKworLyogTWlzYzIgUmVnaXN0ZXIgKDB4NDIpICovCisjZGVmaW5lIFJFR19NSVND MgkJMHg0MgorI2RlZmluZSBBVURJT19QTEwJCSgxIDw8IDUpCisjZGVmaW5lIEFVRElPX1NFQ1RJ T05fUkVTRVQJKDEgPDwgNCkKKyNkZWZpbmUgQVVESU9fU0VDVElPTl9PTgkoMSA8PCAzKQorCisv KiBQQ00gSW50ZXJmYWNlIFJlZ2lzdGVyIDIgKDB4YjEpICovCisjZGVmaW5lIFBDTV9JTkYyX0JD TEsJCSgxIDw8IDYpCS8qIEJpdCBjbG9jayBwb2xhcml0eSAqLworI2RlZmluZSBQQ01fSU5GMl9G UwkJKDEgPDwgNSkJLyogRnJhbWUgU3luYyBwb2xhcml0eSAqLworI2RlZmluZSBQQ01fSU5GMl9N QVNURVIJCSgxIDw8IDQpCS8qIE1hc3RlciAvIFNsYXZlICovCisjZGVmaW5lIFBDTV9JTkYyXzE4 V0wJCSgxIDw8IDMpCS8qIDE4IC8gMTYgYml0cyAqLworI2RlZmluZSBQQ01fR0VORVJBTF9JMlMJ CTAKKyNkZWZpbmUgUENNX0VYQUNUX0kyUwkJMQorI2RlZmluZSBQQ01fTEVGVF9JMlMJCTIKKyNk ZWZpbmUgUENNX1JJR0hUX0kyUwkJMworI2RlZmluZSBQQ01fU0hPUlRfRlMJCTQKKyNkZWZpbmUg UENNX0xPTkdfRlMJCTUKKyNkZWZpbmUgUENNX01PREVfTUFTSwkJNworCisvKiBJMlMgSW50ZXJm YWNlIFJlZ2lzdGVyIDQgKDB4YmUpICovCisjZGVmaW5lIEkyU19FUVVfQllQCQkoMSA8PCA2KQor CisvKiBEQUMgT2Zmc2V0IFJlZ2lzdGVyICgweGNiKSAqLworI2RlZmluZSBEQUNfTVVURQkJKDEg PDwgNykKKworLyogQURDIEFuYWxvZyBSZWdpc3RlciAxICgweGQwKSAqLworI2RlZmluZSBSRUdf QURDX0FOQV8xCQkweGQwCisjZGVmaW5lIE1JQzFCSUFTX01BU0sJCTB4NjAKKworLyogRWFycGll Y2UvU3BlYWtlciBDb250cm9sIFJlZ2lzdGVyIDIgKDB4ZGEpICovCisjZGVmaW5lIFJFR19FQVIy CQkweGRhCisjZGVmaW5lIFJTWU5DX0NIQU5HRQkJKDEgPDwgMikKKworLyogQXVkaW8gU3VwcGxp ZXMgUmVnaXN0ZXIgMiAoMHhkYykgKi8KKyNkZWZpbmUgUkVHX1NVUFBMSUVTMgkJMHhkYworI2Rl ZmluZSBMRE8xNV9SRUFEWQkJKDEgPDwgNCkKKyNkZWZpbmUgTERPMTVfRU4JCSgxIDw8IDMpCisj ZGVmaW5lIENQVU1QX1JFQURZCQkoMSA8PCAyKQorI2RlZmluZSBDUFVNUF9FTgkJKDEgPDwgMSkK KyNkZWZpbmUgQVVESU9fRU4JCSgxIDw8IDApCisjZGVmaW5lIFNVUFBMWV9NQVNLCQkoTERPMTVf RU4gfCBDUFVNUF9FTiB8IEFVRElPX0VOKQorCisvKiBBdWRpbyBFbmFibGUgUmVnaXN0ZXIgMSAo MHhkZCkgKi8KKyNkZWZpbmUgQURDX01PRF9SSUdIVAkJKDEgPDwgMSkKKyNkZWZpbmUgQURDX01P RF9MRUZUCQkoMSA8PCAwKQorCisvKiBBdWRpbyBFbmFibGUgUmVnaXN0ZXIgMiAoMHhkZSkgKi8K KyNkZWZpbmUgQURDX0xFRlQJCSgxIDw8IDUpCisjZGVmaW5lIEFEQ19SSUdIVAkJKDEgPDwgNCkK KworLyogREFDIEVuYWJsZSBSZWdpc3RlciAyICgweGUxKSAqLworI2RlZmluZSBEQUNfTEVGVAkJ KDEgPDwgNSkKKyNkZWZpbmUgREFDX1JJR0hUCQkoMSA8PCA0KQorI2RlZmluZSBNT0RVTEFUT1IJ CSgxIDw8IDMpCisKKy8qIFNob3J0cyBSZWdpc3RlciAoMHhlYikgKi8KKyNkZWZpbmUgUkVHX1NI T1JUUwkJMHhlYgorI2RlZmluZSBTSE9SVF9MTzIJCSgxIDw8IDYpCisjZGVmaW5lIFNIT1JUX0xP MQkJKDEgPDwgNCkKKyNkZWZpbmUgU0hPUlRfSFMyCQkoMSA8PCAyKQorI2RlZmluZSBTSE9SVF9I UzEJCSgxIDw8IDApCisKK2VudW0geworCUZJTFRFUl9CWVBBU1MgPSAwLAorCUZJTFRFUl9MT1df UEFTU18xLAorCUZJTFRFUl9MT1dfUEFTU18yLAorCUZJTFRFUl9ISUdIX1BBU1NfMywKKwlGSUxU RVJfTUFYLAorfTsKKworc3RydWN0IHBtODYweF9wcml2IHsKKwl1bnNpZ25lZCBpbnQJCXN5c2Ns azsKKwl1bnNpZ25lZCBpbnQJCXBjbWNsazsKKwl1bnNpZ25lZCBpbnQJCWRpcjsKKwl1bnNpZ25l ZCBpbnQJCWZpbHRlcjsKKwlzdHJ1Y3Qgc25kX3NvY19jb2RlYwkqY29kZWM7CisJc3RydWN0IGky Y19jbGllbnQJKmkyYzsKKwlzdHJ1Y3QgcG04NjB4X2NoaXAJKmNoaXA7CisKKwlpbnQJCQlpcnFb NF07CisJdW5zaWduZWQgY2hhcgkJbmFtZVs0XVtNQVhfTkFNRV9MRU5dOworCXVuc2lnbmVkIGNo YXIJCXJlZ19jYWNoZVtSRUdfQ0FDSEVfU0laRV07Cit9OworCisvKiAtOTQ1MGRCIHRvIDBkQiBp biAxNTBkQiBzdGVwcyAoIG11dGUgaW5zdGVhZCBvZiAtOTQ1MGRCKSAqLworc3RhdGljIGNvbnN0 IERFQ0xBUkVfVExWX0RCX1NDQUxFKGRwZ2FfdGx2LCAtOTQ1MCwgMTUwLCAxKTsKKworLyogLTlk QiB0byAwZGIgaW4gM2RCIHN0ZXBzICovCitzdGF0aWMgY29uc3QgREVDTEFSRV9UTFZfREJfU0NB TEUoYWRjX3RsdiwgLTkwMCwgMzAwLCAwKTsKKworLyogey0yMywgLTE3LCAtMTMuNSwgLTExLCAt OSwgLTYsIC0zLCAwfWRCICovCitzdGF0aWMgY29uc3QgdW5zaWduZWQgaW50IG1pY190bHZbXSA9 IHsKKwlUTFZfREJfUkFOR0VfSEVBRCg1KSwKKwkwLCAwLCBUTFZfREJfU0NBTEVfSVRFTSgtMjMw MCwgMCwgMCksCisJMSwgMSwgVExWX0RCX1NDQUxFX0lURU0oLTE3MDAsIDAsIDApLAorCTIsIDIs IFRMVl9EQl9TQ0FMRV9JVEVNKC0xMzUwLCAwLCAwKSwKKwkzLCAzLCBUTFZfREJfU0NBTEVfSVRF TSgtMTEwMCwgMCwgMCksCisJNCwgNywgVExWX0RCX1NDQUxFX0lURU0oLTkwMCwgMzAwLCAwKSwK K307CisKKy8qIHswLCAwLCAwLCAtNiwgMCwgNiwgMTIsIDE4fWRCICovCitzdGF0aWMgY29uc3Qg dW5zaWduZWQgaW50IGF1eF90bHZbXSA9IHsKKwlUTFZfREJfUkFOR0VfSEVBRCgyKSwKKwkwLCAy LCBUTFZfREJfU0NBTEVfSVRFTSgwLCAwLCAwKSwKKwkzLCA3LCBUTFZfREJfU0NBTEVfSVRFTSgt NjAwLCA2MDAsIDApLAorfTsKKworLyogey0xNiwgLTEzLCAtMTAsIC03LCAtNS4yLCAtMywzLCAt Mi4yLCAwfWRCLCBtdXRlIGluc3RlYWQgb2YgLTE2ZEIgKi8KK3N0YXRpYyBjb25zdCB1bnNpZ25l ZCBpbnQgb3V0X3RsdltdID0geworCVRMVl9EQl9SQU5HRV9IRUFEKDQpLAorCTAsIDMsIFRMVl9E Ql9TQ0FMRV9JVEVNKC0xNjAwLCAzMDAsIDEpLAorCTQsIDQsIFRMVl9EQl9TQ0FMRV9JVEVNKC01 MjAsIDAsIDApLAorCTUsIDUsIFRMVl9EQl9TQ0FMRV9JVEVNKC0zMzAsIDAsIDApLAorCTYsIDcs IFRMVl9EQl9TQ0FMRV9JVEVNKC0yMjAsIDIyMCwgMCksCit9OworCitzdGF0aWMgY29uc3QgdW5z aWduZWQgaW50IHN0X3RsdltdID0geworCVRMVl9EQl9SQU5HRV9IRUFEKDgpLAorCTAsIDEsIFRM Vl9EQl9TQ0FMRV9JVEVNKC0xMjA0MSwgNjAyLCAwKSwKKwkyLCAzLCBUTFZfREJfU0NBTEVfSVRF TSgtMTEwODcsIDI1MCwgMCksCisJNCwgNSwgVExWX0RCX1NDQUxFX0lURU0oLTEwNjQzLCAxNTgs IDApLAorCTYsIDcsIFRMVl9EQl9TQ0FMRV9JVEVNKC0xMDM1MSwgMTE2LCAwKSwKKwk4LCA5LCBU TFZfREJfU0NBTEVfSVRFTSgtMTAxMzMsIDkyLCAwKSwKKwkxMCwgMTMsIFRMVl9EQl9TQ0FMRV9J VEVNKC05OTU4LCA3MCwgMCksCisJMTQsIDE3LCBUTFZfREJfU0NBTEVfSVRFTSgtOTY4OSwgNTMs IDApLAorCTE4LCAyNzEsIFRMVl9EQl9TQ0FMRV9JVEVNKC05NDg0LCAzNywgMCksCit9OworCisv KiBTaWRldG9uZSBHYWluID0gTSAqIDJeKC01LU4pICovCitzdHJ1Y3Qgc3RfZ2FpbiB7CisJdW5z aWduZWQgaW50CWRiOworCXVuc2lnbmVkIGludAltOworCXVuc2lnbmVkIGludAluOworfTsKKwor c3RhdGljIHN0cnVjdCBzdF9nYWluIHN0X3RhYmxlW10gPSB7CisJey0xMjA0MSwgIDEsIDE1fSwg ey0xMTQzOSwgIDEsIDE0fSwgey0xMTA4NywgIDMsIDE1fSwgey0xMDgzNywgIDEsIDEzfSwKKwl7 LTEwNjQzLCAgNSwgMTV9LCB7LTEwNDg1LCAgMywgMTR9LCB7LTEwMzUxLCAgNywgMTV9LCB7LTEw MjM1LCAgMSwgMTJ9LAorCXstMTAxMzMsICA5LCAxNX0sIHstMTAwNDEsICA1LCAxNH0sIHsgLTk5 NTgsIDExLCAxNX0sIHsgLTk4ODMsICAzLCAxM30sCisJeyAtOTgxMywgMTMsIDE1fSwgeyAtOTc0 OSwgIDcsIDE0fSwgeyAtOTY4OSwgMTUsIDE1fSwgeyAtOTYzMywgIDEsIDExfSwKKwl7IC05NTgw LCAxNywgMTV9LCB7IC05NTMxLCAgOSwgMTR9LCB7IC05NDg0LCAxOSwgMTV9LCB7IC05NDM5LCAg NSwgMTN9LAorCXsgLTkzOTcsIDIxLCAxNX0sIHsgLTkzNTYsIDExLCAxNH0sIHsgLTkzMTgsIDIz LCAxNX0sIHsgLTkyODEsICAzLCAxMn0sCisJeyAtOTI0NSwgMjUsIDE1fSwgeyAtOTIxMSwgMTMs IDE0fSwgeyAtOTE3OCwgMjcsIDE1fSwgeyAtOTE0NywgIDcsIDEzfSwKKwl7IC05MTE2LCAyOSwg MTV9LCB7IC05MDg3LCAxNSwgMTR9LCB7IC05MDU4LCAzMSwgMTV9LCB7IC05MDMxLCAgMSwgMTB9 LAorCXsgLTg5NzgsIDE3LCAxNH0sIHsgLTg5MjksICA5LCAxM30sIHsgLTg4ODIsIDE5LCAxNH0s IHsgLTg4MzcsICA1LCAxMn0sCisJeyAtODc5NSwgMjEsIDE0fSwgeyAtODc1NCwgMTEsIDEzfSwg eyAtODcxNiwgMjMsIDE0fSwgeyAtODY3OSwgIDMsIDExfSwKKwl7IC04NjQzLCAyNSwgMTR9LCB7 IC04NjA5LCAxMywgMTN9LCB7IC04NTc2LCAyNywgMTR9LCB7IC04NTQ1LCAgNywgMTJ9LAorCXsg LTg1MTQsIDI5LCAxNH0sIHsgLTg0ODUsIDE1LCAxM30sIHsgLTg0NTYsIDMxLCAxNH0sIHsgLTg0 MjksICAxLCAgOX0sCisJeyAtODM3NiwgMTcsIDEzfSwgeyAtODMyNywgIDksIDEyfSwgeyAtODI4 MCwgMTksIDEzfSwgeyAtODIzNSwgIDUsIDExfSwKKwl7IC04MTkzLCAyMSwgMTN9LCB7IC04MTUy LCAxMSwgMTJ9LCB7IC04MTE0LCAyMywgMTN9LCB7IC04MDc3LCAgMywgMTB9LAorCXsgLTgwNDEs IDI1LCAxM30sIHsgLTgwMDcsIDEzLCAxMn0sIHsgLTc5NzQsIDI3LCAxM30sIHsgLTc5NDMsICA3 LCAxMX0sCisJeyAtNzkxMiwgMjksIDEzfSwgeyAtNzg4MywgMTUsIDEyfSwgeyAtNzg1NCwgMzEs IDEzfSwgeyAtNzgyNywgIDEsICA4fSwKKwl7IC03Nzc0LCAxNywgMTJ9LCB7IC03NzI0LCAgOSwg MTF9LCB7IC03Njc4LCAxOSwgMTJ9LCB7IC03NjMzLCAgNSwgMTB9LAorCXsgLTc1OTEsIDIxLCAx Mn0sIHsgLTc1NTAsIDExLCAxMX0sIHsgLTc1MTIsIDIzLCAxMn0sIHsgLTc0NzUsICAzLCAgOX0s CisJeyAtNzQzOSwgMjUsIDEyfSwgeyAtNzQwNSwgMTMsIDExfSwgeyAtNzM3MiwgMjcsIDEyfSwg eyAtNzM0MSwgIDcsIDEwfSwKKwl7IC03MzEwLCAyOSwgMTJ9LCB7IC03MjgxLCAxNSwgMTF9LCB7 IC03MjUyLCAzMSwgMTJ9LCB7IC03MjI1LCAgMSwgIDd9LAorCXsgLTcxNzIsIDE3LCAxMX0sIHsg LTcxMjIsICA5LCAxMH0sIHsgLTcwNzUsIDE5LCAxMX0sIHsgLTcwMzEsICA1LCAgOX0sCisJeyAt Njk4OSwgMjEsIDExfSwgeyAtNjk0OCwgMTEsIDEwfSwgeyAtNjkxMCwgMjMsIDExfSwgeyAtNjg3 MywgIDMsICA4fSwKKwl7IC02ODM3LCAyNSwgMTF9LCB7IC02ODAzLCAxMywgMTB9LCB7IC02Nzcw LCAyNywgMTF9LCB7IC02NzM5LCAgNywgIDl9LAorCXsgLTY3MDgsIDI5LCAxMX0sIHsgLTY2Nzks IDE1LCAxMH0sIHsgLTY2NTAsIDMxLCAxMX0sIHsgLTY2MjMsICAxLCAgNn0sCisJeyAtNjU3MCwg MTcsIDEwfSwgeyAtNjUyMCwgIDksICA5fSwgeyAtNjQ3MywgMTksIDEwfSwgeyAtNjQyOSwgIDUs ICA4fSwKKwl7IC02Mzg2LCAyMSwgMTB9LCB7IC02MzQ2LCAxMSwgIDl9LCB7IC02MzA3LCAyMywg MTB9LCB7IC02MjcwLCAgMywgIDd9LAorCXsgLTYyMzUsIDI1LCAxMH0sIHsgLTYyMDEsIDEzLCAg OX0sIHsgLTYxNjgsIDI3LCAxMH0sIHsgLTYxMzcsICA3LCAgOH0sCisJeyAtNjEwNiwgMjksIDEw fSwgeyAtNjA3NywgMTUsICA5fSwgeyAtNjA0OCwgMzEsIDEwfSwgeyAtNjAyMSwgIDEsICA1fSwK Kwl7IC01OTY4LCAxNywgIDl9LCB7IC01OTE4LCAgOSwgIDh9LCB7IC01ODcxLCAxOSwgIDl9LCB7 IC01ODI3LCAgNSwgIDd9LAorCXsgLTU3ODQsIDIxLCAgOX0sIHsgLTU3NDQsIDExLCAgOH0sIHsg LTU3MDUsIDIzLCAgOX0sIHsgLTU2NjgsICAzLCAgNn0sCisJeyAtNTYzMywgMjUsICA5fSwgeyAt NTU5OSwgMTMsICA4fSwgeyAtNTU2NiwgMjcsICA5fSwgeyAtNTUzNSwgIDcsICA3fSwKKwl7IC01 NTA0LCAyOSwgIDl9LCB7IC01NDc1LCAxNSwgIDh9LCB7IC01NDQ2LCAzMSwgIDl9LCB7IC01NDE5 LCAgMSwgIDR9LAorCXsgLTUzNjYsIDE3LCAgOH0sIHsgLTUzMTYsICA5LCAgN30sIHsgLTUyNjks IDE5LCAgOH0sIHsgLTUyMjUsICA1LCAgNn0sCisJeyAtNTE4MiwgMjEsICA4fSwgeyAtNTE0Miwg MTEsICA3fSwgeyAtNTEwMywgMjMsICA4fSwgeyAtNTA2NiwgIDMsICA1fSwKKwl7IC01MDMxLCAy NSwgIDh9LCB7IC00OTk3LCAxMywgIDd9LCB7IC00OTY0LCAyNywgIDh9LCB7IC00OTMyLCAgNywg IDZ9LAorCXsgLTQ5MDIsIDI5LCAgOH0sIHsgLTQ4NzMsIDE1LCAgN30sIHsgLTQ4NDQsIDMxLCAg OH0sIHsgLTQ4MTYsICAxLCAgM30sCisJeyAtNDc2NCwgMTcsICA3fSwgeyAtNDcxNCwgIDksICA2 fSwgeyAtNDY2NywgMTksICA3fSwgeyAtNDYyMywgIDUsICA1fSwKKwl7IC00NTgwLCAyMSwgIDd9 LCB7IC00NTQwLCAxMSwgIDZ9LCB7IC00NTAxLCAyMywgIDd9LCB7IC00NDY0LCAgMywgIDR9LAor CXsgLTQ0MjksIDI1LCAgN30sIHsgLTQzOTUsIDEzLCAgNn0sIHsgLTQzNjIsIDI3LCAgN30sIHsg LTQzMzAsICA3LCAgNX0sCisJeyAtNDMwMCwgMjksICA3fSwgeyAtNDI3MCwgMTUsICA2fSwgeyAt NDI0MiwgMzEsICA3fSwgeyAtNDIxNCwgIDEsICAyfSwKKwl7IC00MTYyLCAxNywgIDZ9LCB7IC00 MTEyLCAgOSwgIDV9LCB7IC00MDY1LCAxOSwgIDZ9LCB7IC00MDIxLCAgNSwgIDR9LAorCXsgLTM5 NzgsIDIxLCAgNn0sIHsgLTM5MzgsIDExLCAgNX0sIHsgLTM4OTksIDIzLCAgNn0sIHsgLTM4NjIs ICAzLCAgM30sCisJeyAtMzgyNywgMjUsICA2fSwgeyAtMzc5MywgMTMsICA1fSwgeyAtMzc2MCwg MjcsICA2fSwgeyAtMzcyOCwgIDcsICA0fSwKKwl7IC0zNjk4LCAyOSwgIDZ9LCB7IC0zNjY4LCAx NSwgIDV9LCB7IC0zNjQwLCAzMSwgIDZ9LCB7IC0zNjEyLCAgMSwgIDF9LAorCXsgLTM1NjAsIDE3 LCAgNX0sIHsgLTM1MTAsICA5LCAgNH0sIHsgLTM0NjMsIDE5LCAgNX0sIHsgLTM0MTksICA1LCAg M30sCisJeyAtMzM3NiwgMjEsICA1fSwgeyAtMzMzNiwgMTEsICA0fSwgeyAtMzI5NywgMjMsICA1 fSwgeyAtMzI2MCwgIDMsICAyfSwKKwl7IC0zMjI1LCAyNSwgIDV9LCB7IC0zMTkxLCAxMywgIDR9 LCB7IC0zMTU4LCAyNywgIDV9LCB7IC0zMTI2LCAgNywgIDN9LAorCXsgLTMwOTYsIDI5LCAgNX0s IHsgLTMwNjYsIDE1LCAgNH0sIHsgLTMwMzgsIDMxLCAgNX0sIHsgLTMwMTAsICAxLCAgMH0sCisJ eyAtMjk1OCwgMTcsICA0fSwgeyAtMjkwOCwgIDksICAzfSwgeyAtMjg2MSwgMTksICA0fSwgeyAt MjgxNiwgIDUsICAyfSwKKwl7IC0yNzc0LCAyMSwgIDR9LCB7IC0yNzM0LCAxMSwgIDN9LCB7IC0y Njk1LCAyMywgIDR9LCB7IC0yNjU4LCAgMywgIDF9LAorCXsgLTI2MjMsIDI1LCAgNH0sIHsgLTI1 ODksIDEzLCAgM30sIHsgLTI1NTYsIDI3LCAgNH0sIHsgLTI1MjQsICA3LCAgMn0sCisJeyAtMjQ5 NCwgMjksICA0fSwgeyAtMjQ2NCwgMTUsICAzfSwgeyAtMjQzNiwgMzEsICA0fSwgeyAtMjQwOCwg IDIsICAwfSwKKwl7IC0yMzU2LCAxNywgIDN9LCB7IC0yMzA2LCAgOSwgIDJ9LCB7IC0yMjU5LCAx OSwgIDN9LCB7IC0yMjE0LCAgNSwgIDF9LAorCXsgLTIxNzIsIDIxLCAgM30sIHsgLTIxMzIsIDEx LCAgMn0sIHsgLTIwOTMsIDIzLCAgM30sIHsgLTIwNTYsICAzLCAgMH0sCisJeyAtMjAyMSwgMjUs ICAzfSwgeyAtMTk4NywgMTMsICAyfSwgeyAtMTk1NCwgMjcsICAzfSwgeyAtMTkyMiwgIDcsICAx fSwKKwl7IC0xODkyLCAyOSwgIDN9LCB7IC0xODYyLCAxNSwgIDJ9LCB7IC0xODM0LCAzMSwgIDN9 LCB7IC0xODA2LCAgNCwgIDB9LAorCXsgLTE3NTQsIDE3LCAgMn0sIHsgLTE3MDQsICA5LCAgMX0s IHsgLTE2NTcsIDE5LCAgMn0sIHsgLTE2MTIsICA1LCAgMH0sCisJeyAtMTU3MCwgMjEsICAyfSwg eyAtMTUzMCwgMTEsICAxfSwgeyAtMTQ5MSwgMjMsICAyfSwgeyAtMTQ1NCwgIDYsICAwfSwKKwl7 IC0xNDE5LCAyNSwgIDJ9LCB7IC0xMzg0LCAxMywgIDF9LCB7IC0xMzUyLCAyNywgIDJ9LCB7IC0x MzIwLCAgNywgIDB9LAorCXsgLTEyOTAsIDI5LCAgMn0sIHsgLTEyNjAsIDE1LCAgMX0sIHsgLTEy MzIsIDMxLCAgMn0sIHsgLTEyMDQsICA4LCAgMH0sCisJeyAtMTE1MSwgMTcsICAxfSwgeyAtMTEw MiwgIDksICAwfSwgeyAtMTA1NSwgMTksICAxfSwgeyAtMTAxMCwgMTAsICAwfSwKKwl7ICAtOTY4 LCAyMSwgIDF9LCB7ICAtOTI4LCAxMSwgIDB9LCB7ICAtODg5LCAyMywgIDF9LCB7ICAtODUyLCAx MiwgIDB9LAorCXsgIC04MTYsIDI1LCAgMX0sIHsgIC03ODIsIDEzLCAgMH0sIHsgIC03NTAsIDI3 LCAgMX0sIHsgIC03MTgsIDE0LCAgMH0sCisJeyAgLTY4OCwgMjksICAxfSwgeyAgLTY1OCwgMTUs ICAwfSwgeyAgLTYzMCwgMzEsICAxfSwgeyAgLTYwMiwgMTYsICAwfSwKKwl7ICAtNTQ5LCAxNywg IDB9LCB7ICAtNTAwLCAxOCwgIDB9LCB7ICAtNDUzLCAxOSwgIDB9LCB7ICAtNDA4LCAyMCwgIDB9 LAorCXsgIC0zNjYsIDIxLCAgMH0sIHsgIC0zMjUsIDIyLCAgMH0sIHsgIC0yODcsIDIzLCAgMH0s IHsgIC0yNTAsIDI0LCAgMH0sCisJeyAgLTIxNCwgMjUsICAwfSwgeyAgLTE4MCwgMjYsICAwfSwg eyAgLTE0OCwgMjcsICAwfSwgeyAgLTExNiwgMjgsICAwfSwKKwl7ICAgLTg2LCAyOSwgIDB9LCB7 ICAgLTU2LCAzMCwgIDB9LCB7ICAgLTI4LCAzMSwgIDB9LCB7ICAgICAwLCAgMCwgIDB9LAorfTsK Kworc3RhdGljIGludCBwbTg2MHhfdm9sYXRpbGUodW5zaWduZWQgaW50IHJlZykKK3sKKwlCVUdf T04ocmVnID49IFJFR19DQUNIRV9TSVpFKTsKKworCXN3aXRjaCAocmVnKSB7CisJY2FzZSBQTTg2 MFhfQVVESU9fU1VQUExJRVNfMjoKKwkJcmV0dXJuIDE7CisJfQorCisJcmV0dXJuIDA7Cit9CisK K3N0YXRpYyB1bnNpZ25lZCBpbnQgcG04NjB4X3JlYWRfcmVnX2NhY2hlKHN0cnVjdCBzbmRfc29j X2NvZGVjICpjb2RlYywKKwkJCQkJICB1bnNpZ25lZCBpbnQgcmVnKQoreworCXVuc2lnbmVkIGNo YXIgKmNhY2hlID0gY29kZWMtPnJlZ19jYWNoZTsKKworCUJVR19PTihyZWcgPj0gUkVHX0NBQ0hF X1NJWkUpOworCisJaWYgKHBtODYweF92b2xhdGlsZShyZWcpKQorCQlyZXR1cm4gY2FjaGVbcmVn XTsKKworCXJlZyArPSBSRUdfQ0FDSEVfQkFTRTsKKworCXJldHVybiBwbTg2MHhfcmVnX3JlYWQo Y29kZWMtPmNvbnRyb2xfZGF0YSwgcmVnKTsKK30KKworc3RhdGljIGludCBwbTg2MHhfd3JpdGVf cmVnX2NhY2hlKHN0cnVjdCBzbmRfc29jX2NvZGVjICpjb2RlYywKKwkJCQkgIHVuc2lnbmVkIGlu dCByZWcsIHVuc2lnbmVkIGludCB2YWx1ZSkKK3sKKwl1bnNpZ25lZCBjaGFyICpjYWNoZSA9IGNv ZGVjLT5yZWdfY2FjaGU7CisKKwlCVUdfT04ocmVnID49IFJFR19DQUNIRV9TSVpFKTsKKworCWlm ICghcG04NjB4X3ZvbGF0aWxlKHJlZykpCisJCWNhY2hlW3JlZ10gPSAodW5zaWduZWQgY2hhcil2 YWx1ZTsKKworCXJlZyArPSBSRUdfQ0FDSEVfQkFTRTsKKworCXJldHVybiBwbTg2MHhfcmVnX3dy aXRlKGNvZGVjLT5jb250cm9sX2RhdGEsIHJlZywgdmFsdWUpOworfQorCitzdGF0aWMgaW50IHNu ZF9zb2NfZ2V0X3ZvbHN3XzJyX3N0KHN0cnVjdCBzbmRfa2NvbnRyb2wgKmtjb250cm9sLAorCQkJ CSAgIHN0cnVjdCBzbmRfY3RsX2VsZW1fdmFsdWUgKnVjb250cm9sKQoreworCXN0cnVjdCBzb2Nf bWl4ZXJfY29udHJvbCAqbWMgPQorCQkoc3RydWN0IHNvY19taXhlcl9jb250cm9sICopa2NvbnRy b2wtPnByaXZhdGVfdmFsdWU7CisJc3RydWN0IHNuZF9zb2NfY29kZWMgKmNvZGVjID0gc25kX2tj b250cm9sX2NoaXAoa2NvbnRyb2wpOworCXVuc2lnbmVkIGludCByZWcgPSBtYy0+cmVnOworCXVu c2lnbmVkIGludCByZWcyID0gbWMtPnJyZWc7CisJaW50IHZhbFsyXSwgdmFsMlsyXSwgaTsKKwor CXZhbFswXSA9IHNuZF9zb2NfcmVhZChjb2RlYywgcmVnKSAmIDB4M2Y7CisJdmFsWzFdID0gKHNu ZF9zb2NfcmVhZChjb2RlYywgUE04NjBYX1NJREVUT05FX1NISUZUKSA+PiA0KSAmIDB4ZjsKKwl2 YWwyWzBdID0gc25kX3NvY19yZWFkKGNvZGVjLCByZWcyKSAmIDB4M2Y7CisJdmFsMlsxXSA9IChz bmRfc29jX3JlYWQoY29kZWMsIFBNODYwWF9TSURFVE9ORV9TSElGVCkpICYgMHhmOworCisJZm9y IChpID0gMDsgaSA8IEFSUkFZX1NJWkUoc3RfdGFibGUpOyBpKyspIHsKKwkJaWYgKChzdF90YWJs ZVtpXS5tID09IHZhbFswXSkgJiYgKHN0X3RhYmxlW2ldLm4gPT0gdmFsWzFdKSkKKwkJCXVjb250 cm9sLT52YWx1ZS5pbnRlZ2VyLnZhbHVlWzBdID0gaTsKKwkJaWYgKChzdF90YWJsZVtpXS5tID09 IHZhbDJbMF0pICYmIChzdF90YWJsZVtpXS5uID09IHZhbDJbMV0pKQorCQkJdWNvbnRyb2wtPnZh bHVlLmludGVnZXIudmFsdWVbMV0gPSBpOworCX0KKwlyZXR1cm4gMDsKK30KKworc3RhdGljIGlu dCBzbmRfc29jX3B1dF92b2xzd18ycl9zdChzdHJ1Y3Qgc25kX2tjb250cm9sICprY29udHJvbCwK KwkJCQkgICBzdHJ1Y3Qgc25kX2N0bF9lbGVtX3ZhbHVlICp1Y29udHJvbCkKK3sKKwlzdHJ1Y3Qg c29jX21peGVyX2NvbnRyb2wgKm1jID0KKwkJKHN0cnVjdCBzb2NfbWl4ZXJfY29udHJvbCAqKWtj b250cm9sLT5wcml2YXRlX3ZhbHVlOworCXN0cnVjdCBzbmRfc29jX2NvZGVjICpjb2RlYyA9IHNu ZF9rY29udHJvbF9jaGlwKGtjb250cm9sKTsKKwl1bnNpZ25lZCBpbnQgcmVnID0gbWMtPnJlZzsK Kwl1bnNpZ25lZCBpbnQgcmVnMiA9IG1jLT5ycmVnOworCWludCBlcnI7CisJdW5zaWduZWQgaW50 IHZhbCwgdmFsMjsKKworCXZhbCA9IHVjb250cm9sLT52YWx1ZS5pbnRlZ2VyLnZhbHVlWzBdOwor CXZhbDIgPSB1Y29udHJvbC0+dmFsdWUuaW50ZWdlci52YWx1ZVsxXTsKKworCWVyciA9IHNuZF9z b2NfdXBkYXRlX2JpdHMoY29kZWMsIHJlZywgMHgzZiwgc3RfdGFibGVbdmFsXS5tKTsKKwlpZiAo ZXJyIDwgMCkKKwkJcmV0dXJuIGVycjsKKwllcnIgPSBzbmRfc29jX3VwZGF0ZV9iaXRzKGNvZGVj LCBQTTg2MFhfU0lERVRPTkVfU0hJRlQsIDB4ZjAsCisJCQkJICBzdF90YWJsZVt2YWxdLm4gPDwg NCk7CisJaWYgKGVyciA8IDApCisJCXJldHVybiBlcnI7CisKKwllcnIgPSBzbmRfc29jX3VwZGF0 ZV9iaXRzKGNvZGVjLCByZWcyLCAweDNmLCBzdF90YWJsZVt2YWwyXS5tKTsKKwlpZiAoZXJyIDwg MCkKKwkJcmV0dXJuIGVycjsKKwllcnIgPSBzbmRfc29jX3VwZGF0ZV9iaXRzKGNvZGVjLCBQTTg2 MFhfU0lERVRPTkVfU0hJRlQsIDB4MGYsCisJCQkJICBzdF90YWJsZVt2YWwyXS5uKTsKKwlyZXR1 cm4gZXJyOworfQorCitzdGF0aWMgaW50IHNuZF9zb2NfZ2V0X3ZvbHN3XzJyX291dChzdHJ1Y3Qg c25kX2tjb250cm9sICprY29udHJvbCwKKwkJCQkgICAgc3RydWN0IHNuZF9jdGxfZWxlbV92YWx1 ZSAqdWNvbnRyb2wpCit7CisJc3RydWN0IHNvY19taXhlcl9jb250cm9sICptYyA9CisJCShzdHJ1 Y3Qgc29jX21peGVyX2NvbnRyb2wgKilrY29udHJvbC0+cHJpdmF0ZV92YWx1ZTsKKwlzdHJ1Y3Qg c25kX3NvY19jb2RlYyAqY29kZWMgPSBzbmRfa2NvbnRyb2xfY2hpcChrY29udHJvbCk7CisJdW5z aWduZWQgaW50IHJlZyA9IG1jLT5yZWc7CisJdW5zaWduZWQgaW50IHJlZzIgPSBtYy0+cnJlZzsK Kwl1bnNpZ25lZCBpbnQgc2hpZnQgPSBtYy0+c2hpZnQ7CisJaW50IG1heCA9IG1jLT5tYXgsIHZh bCwgdmFsMjsKKwl1bnNpZ25lZCBpbnQgbWFzayA9ICgxIDw8IGZscyhtYXgpKSAtIDE7CisKKwl2 YWwgPSBzbmRfc29jX3JlYWQoY29kZWMsIHJlZykgPj4gc2hpZnQ7CisJdmFsMiA9IHNuZF9zb2Nf cmVhZChjb2RlYywgcmVnMikgPj4gc2hpZnQ7CisJdWNvbnRyb2wtPnZhbHVlLmludGVnZXIudmFs dWVbMF0gPSAobWF4IC0gdmFsKSAmIG1hc2s7CisJdWNvbnRyb2wtPnZhbHVlLmludGVnZXIudmFs dWVbMV0gPSAobWF4IC0gdmFsMikgJiBtYXNrOworCisJcmV0dXJuIDA7Cit9CisKK3N0YXRpYyBp bnQgc25kX3NvY19wdXRfdm9sc3dfMnJfb3V0KHN0cnVjdCBzbmRfa2NvbnRyb2wgKmtjb250cm9s LAorCQkJCSAgICBzdHJ1Y3Qgc25kX2N0bF9lbGVtX3ZhbHVlICp1Y29udHJvbCkKK3sKKwlzdHJ1 Y3Qgc29jX21peGVyX2NvbnRyb2wgKm1jID0KKwkJKHN0cnVjdCBzb2NfbWl4ZXJfY29udHJvbCAq KWtjb250cm9sLT5wcml2YXRlX3ZhbHVlOworCXN0cnVjdCBzbmRfc29jX2NvZGVjICpjb2RlYyA9 IHNuZF9rY29udHJvbF9jaGlwKGtjb250cm9sKTsKKwl1bnNpZ25lZCBpbnQgcmVnID0gbWMtPnJl ZzsKKwl1bnNpZ25lZCBpbnQgcmVnMiA9IG1jLT5ycmVnOworCXVuc2lnbmVkIGludCBzaGlmdCA9 IG1jLT5zaGlmdDsKKwlpbnQgbWF4ID0gbWMtPm1heDsKKwl1bnNpZ25lZCBpbnQgbWFzayA9ICgx IDw8IGZscyhtYXgpKSAtIDE7CisJaW50IGVycjsKKwl1bnNpZ25lZCBpbnQgdmFsLCB2YWwyLCB2 YWxfbWFzazsKKworCXZhbF9tYXNrID0gbWFzayA8PCBzaGlmdDsKKwl2YWwgPSAoKG1heCAtIHVj b250cm9sLT52YWx1ZS5pbnRlZ2VyLnZhbHVlWzBdKSAmIG1hc2spOworCXZhbDIgPSAoKG1heCAt IHVjb250cm9sLT52YWx1ZS5pbnRlZ2VyLnZhbHVlWzFdKSAmIG1hc2spOworCisJdmFsID0gdmFs IDw8IHNoaWZ0OworCXZhbDIgPSB2YWwyIDw8IHNoaWZ0OworCisJZXJyID0gc25kX3NvY191cGRh dGVfYml0cyhjb2RlYywgcmVnLCB2YWxfbWFzaywgdmFsKTsKKwlpZiAoZXJyIDwgMCkKKwkJcmV0 dXJuIGVycjsKKworCWVyciA9IHNuZF9zb2NfdXBkYXRlX2JpdHMoY29kZWMsIHJlZzIsIHZhbF9t YXNrLCB2YWwyKTsKKwlyZXR1cm4gZXJyOworfQorCisvKiBEQVBNIFdpZGdldCBFdmVudHMgKi8K K3N0YXRpYyBpbnQgcG04NjB4X3JzeW5jX2V2ZW50KHN0cnVjdCBzbmRfc29jX2RhcG1fd2lkZ2V0 ICp3LAorCQkJICAgICAgc3RydWN0IHNuZF9rY29udHJvbCAqa2NvbnRyb2wsIGludCBldmVudCkK K3sKKwlzdHJ1Y3Qgc25kX3NvY19jb2RlYyAqY29kZWMgPSB3LT5jb2RlYzsKKworCS8qIHVubXV0 ZSBEQUMgKi8KKwlzbmRfc29jX3VwZGF0ZV9iaXRzKGNvZGVjLCBQTTg2MFhfREFDX09GRlNFVCwg REFDX01VVEUsIDApOworCXNuZF9zb2NfdXBkYXRlX2JpdHMoY29kZWMsIFBNODYwWF9FQVJfQ1RS TF8yLAorCQkJICAgIFJTWU5DX0NIQU5HRSwgUlNZTkNfQ0hBTkdFKTsKKwlyZXR1cm4gMDsKK30K Kworc3RhdGljIGludCBwbTg2MHhfYWRjX2V2ZW50KHN0cnVjdCBzbmRfc29jX2RhcG1fd2lkZ2V0 ICp3LAorCQkJICAgIHN0cnVjdCBzbmRfa2NvbnRyb2wgKmtjb250cm9sLCBpbnQgZXZlbnQpCit7 CisJc3RydWN0IHNuZF9zb2NfY29kZWMgKmNvZGVjID0gdy0+Y29kZWM7CisJdW5zaWduZWQgaW50 IGVuMSA9IDAsIGVuMiA9IDA7CisKKwlpZiAoIXN0cmNtcCh3LT5uYW1lLCAiTGVmdCBBREMiKSkg eworCQllbjEgPSBBRENfTU9EX0xFRlQ7CisJCWVuMiA9IEFEQ19MRUZUOworCX0KKwlpZiAoIXN0 cmNtcCh3LT5uYW1lLCAiUmlnaHQgQURDIikpIHsKKwkJZW4xID0gQURDX01PRF9SSUdIVDsKKwkJ ZW4yID0gQURDX1JJR0hUOworCX0KKwlzd2l0Y2ggKGV2ZW50KSB7CisJY2FzZSBTTkRfU09DX0RB UE1fUFJFX1BNVToKKwkJc25kX3NvY191cGRhdGVfYml0cyhjb2RlYywgUE04NjBYX0FEQ19FTl8x LCBlbjEsIGVuMSk7CisJCXNuZF9zb2NfdXBkYXRlX2JpdHMoY29kZWMsIFBNODYwWF9BRENfRU5f MiwgZW4yLCBlbjIpOworCQlicmVhazsKKwljYXNlIFNORF9TT0NfREFQTV9QUkVfUE1EOgorCQlz bmRfc29jX3VwZGF0ZV9iaXRzKGNvZGVjLCBQTTg2MFhfQURDX0VOXzEsIGVuMSwgMCk7CisJCXNu ZF9zb2NfdXBkYXRlX2JpdHMoY29kZWMsIFBNODYwWF9BRENfRU5fMiwgZW4yLCAwKTsKKwkJYnJl YWs7CisJfQorCXJldHVybiAwOworfQorCitzdGF0aWMgaW50IHBtODYweF9kYWNfZXZlbnQoc3Ry dWN0IHNuZF9zb2NfZGFwbV93aWRnZXQgKncsCisJCQkgICAgc3RydWN0IHNuZF9rY29udHJvbCAq a2NvbnRyb2wsIGludCBldmVudCkKK3sKKwlzdHJ1Y3Qgc25kX3NvY19jb2RlYyAqY29kZWMgPSB3 LT5jb2RlYzsKKwl1bnNpZ25lZCBpbnQgZGFjID0gMDsKKwlpbnQgZGF0YTsKKworCWlmICghc3Ry Y21wKHctPm5hbWUsICJMZWZ0IERBQyIpKQorCQlkYWMgPSBEQUNfTEVGVDsKKwlpZiAoIXN0cmNt cCh3LT5uYW1lLCAiUmlnaHQgREFDIikpCisJCWRhYyA9IERBQ19SSUdIVDsKKwlzd2l0Y2ggKGV2 ZW50KSB7CisJY2FzZSBTTkRfU09DX0RBUE1fUFJFX1BNVToKKwkJaWYgKGRhYykgeworCQkJZGFj IHw9IE1PRFVMQVRPUjsKKwkJCS8qIG11dGUgKi8KKwkJCXNuZF9zb2NfdXBkYXRlX2JpdHMoY29k ZWMsIFBNODYwWF9EQUNfT0ZGU0VULAorCQkJCQkgICAgREFDX01VVEUsIERBQ19NVVRFKTsKKwkJ CXNuZF9zb2NfdXBkYXRlX2JpdHMoY29kZWMsIFBNODYwWF9FQVJfQ1RSTF8yLAorCQkJCQkgICAg UlNZTkNfQ0hBTkdFLCBSU1lOQ19DSEFOR0UpOworCQkJLyogdXBkYXRlIGRhYyAqLworCQkJc25k X3NvY191cGRhdGVfYml0cyhjb2RlYywgUE04NjBYX0RBQ19FTl8yLAorCQkJCQkgICAgZGFjLCBk YWMpOworCQl9CisJCWJyZWFrOworCWNhc2UgU05EX1NPQ19EQVBNX1BSRV9QTUQ6CisJCWlmIChk YWMpIHsKKwkJCS8qIG11dGUgKi8KKwkJCXNuZF9zb2NfdXBkYXRlX2JpdHMoY29kZWMsIFBNODYw WF9EQUNfT0ZGU0VULAorCQkJCQkgICAgREFDX01VVEUsIERBQ19NVVRFKTsKKwkJCXNuZF9zb2Nf dXBkYXRlX2JpdHMoY29kZWMsIFBNODYwWF9FQVJfQ1RSTF8yLAorCQkJCQkgICAgUlNZTkNfQ0hB TkdFLCBSU1lOQ19DSEFOR0UpOworCQkJLyogdXBkYXRlIGRhYyAqLworCQkJZGF0YSA9IHNuZF9z b2NfcmVhZChjb2RlYywgUE04NjBYX0RBQ19FTl8yKTsKKwkJCWRhdGEgJj0gfmRhYzsKKwkJCWlm ICghKGRhdGEgJiAoREFDX0xFRlQgfCBEQUNfUklHSFQpKSkKKwkJCQlkYXRhICY9IH5NT0RVTEFU T1I7CisJCQlzbmRfc29jX3dyaXRlKGNvZGVjLCBQTTg2MFhfREFDX0VOXzIsIGRhdGEpOworCQl9 CisJCWJyZWFrOworCX0KKwlyZXR1cm4gMDsKK30KKworc3RhdGljIGludCBwbTg2MHhfbWljMV9l dmVudChzdHJ1Y3Qgc25kX3NvY19kYXBtX3dpZGdldCAqdywKKwkJCSAgICAgc3RydWN0IHNuZF9r Y29udHJvbCAqa2NvbnRyb2wsIGludCBldmVudCkKK3sKKwlzdHJ1Y3Qgc25kX3NvY19jb2RlYyAq Y29kZWMgPSB3LT5jb2RlYzsKKworCXN3aXRjaCAoZXZlbnQpIHsKKwljYXNlIFNORF9TT0NfREFQ TV9QT1NUX1BNVToKKwkJLyogRW5hYmxlIE1pYzEgQmlhcyAmIE1JQ0RFVCwgSFNERVQgKi8KKwkJ c25kX3NvY191cGRhdGVfYml0cyhjb2RlYywgUE04NjBYX0FEQ19BTkFfMSwgTUlDMUJJQVNfTUFT SywKKwkJCQkgICAgTUlDMUJJQVNfTUFTSyk7CisJCXBtODYweF9zZXRfYml0cyhjb2RlYy0+Y29u dHJvbF9kYXRhLCBSRUdfTUlDX0RFVCwKKwkJCQlNSUNERVRfTUFTSywgTUlDREVUX01BU0spOwor CQlwbTg2MHhfc2V0X2JpdHMoY29kZWMtPmNvbnRyb2xfZGF0YSwgUkVHX0hTX0RFVCwKKwkJCQlF Tl9IU19ERVQsIEVOX0hTX0RFVCk7CisJCWJyZWFrOworCWNhc2UgU05EX1NPQ19EQVBNX1BSRV9Q TUQ6CisJCS8qIGRpc2FibGUgTWljMSBCaWFzICYgTUlDREVULCBIU0RFVCAqLworCQlwbTg2MHhf c2V0X2JpdHMoY29kZWMtPmNvbnRyb2xfZGF0YSwgUkVHX01JQ19ERVQsCisJCQkJTUlDREVUX01B U0ssIDApOworCQlwbTg2MHhfc2V0X2JpdHMoY29kZWMtPmNvbnRyb2xfZGF0YSwgUkVHX0hTX0RF VCwKKwkJCQlFTl9IU19ERVQsIDApOworCQlzbmRfc29jX3VwZGF0ZV9iaXRzKGNvZGVjLCBQTTg2 MFhfQURDX0FOQV8xLCBNSUMxQklBU19NQVNLLCAwKTsKKwkJYnJlYWs7CisJfQorCXJldHVybiAw OworfQorCitzdGF0aWMgY29uc3QgY2hhciAqcG04NjB4X29wYW1wX3RleHRzW10gPSB7Ii01MCUi LCAiLTI1JSIsICIwJSIsICI3NSUifTsKKworc3RhdGljIGNvbnN0IGNoYXIgKnBtODYweF9wYV90 ZXh0c1tdID0geyItMzMlIiwgIjAlIiwgIjMzJSIsICI2NiUifTsKKworc3RhdGljIGNvbnN0IHN0 cnVjdCBzb2NfZW51bSBwbTg2MHhfaHMxX29wYW1wX2VudW0gPQorCVNPQ19FTlVNX1NJTkdMRShQ TTg2MFhfSFMxX0NUUkwsIDUsIDQsIHBtODYweF9vcGFtcF90ZXh0cyk7CisKK3N0YXRpYyBjb25z dCBzdHJ1Y3Qgc29jX2VudW0gcG04NjB4X2hzMl9vcGFtcF9lbnVtID0KKwlTT0NfRU5VTV9TSU5H TEUoUE04NjBYX0hTMl9DVFJMLCA1LCA0LCBwbTg2MHhfb3BhbXBfdGV4dHMpOworCitzdGF0aWMg Y29uc3Qgc3RydWN0IHNvY19lbnVtIHBtODYweF9oczFfcGFfZW51bSA9CisJU09DX0VOVU1fU0lO R0xFKFBNODYwWF9IUzFfQ1RSTCwgMywgNCwgcG04NjB4X3BhX3RleHRzKTsKKworc3RhdGljIGNv bnN0IHN0cnVjdCBzb2NfZW51bSBwbTg2MHhfaHMyX3BhX2VudW0gPQorCVNPQ19FTlVNX1NJTkdM RShQTTg2MFhfSFMyX0NUUkwsIDMsIDQsIHBtODYweF9wYV90ZXh0cyk7CisKK3N0YXRpYyBjb25z dCBzdHJ1Y3Qgc29jX2VudW0gcG04NjB4X2xvMV9vcGFtcF9lbnVtID0KKwlTT0NfRU5VTV9TSU5H TEUoUE04NjBYX0xPMV9DVFJMLCA1LCA0LCBwbTg2MHhfb3BhbXBfdGV4dHMpOworCitzdGF0aWMg Y29uc3Qgc3RydWN0IHNvY19lbnVtIHBtODYweF9sbzJfb3BhbXBfZW51bSA9CisJU09DX0VOVU1f U0lOR0xFKFBNODYwWF9MTzJfQ1RSTCwgNSwgNCwgcG04NjB4X29wYW1wX3RleHRzKTsKKworc3Rh dGljIGNvbnN0IHN0cnVjdCBzb2NfZW51bSBwbTg2MHhfbG8xX3BhX2VudW0gPQorCVNPQ19FTlVN X1NJTkdMRShQTTg2MFhfTE8xX0NUUkwsIDMsIDQsIHBtODYweF9wYV90ZXh0cyk7CisKK3N0YXRp YyBjb25zdCBzdHJ1Y3Qgc29jX2VudW0gcG04NjB4X2xvMl9wYV9lbnVtID0KKwlTT0NfRU5VTV9T SU5HTEUoUE04NjBYX0xPMl9DVFJMLCAzLCA0LCBwbTg2MHhfcGFfdGV4dHMpOworCitzdGF0aWMg Y29uc3Qgc3RydWN0IHNvY19lbnVtIHBtODYweF9zcGtfcGFfZW51bSA9CisJU09DX0VOVU1fU0lO R0xFKFBNODYwWF9FQVJfQ1RSTF8xLCA1LCA0LCBwbTg2MHhfcGFfdGV4dHMpOworCitzdGF0aWMg Y29uc3Qgc3RydWN0IHNvY19lbnVtIHBtODYweF9lYXJfcGFfZW51bSA9CisJU09DX0VOVU1fU0lO R0xFKFBNODYwWF9FQVJfQ1RSTF8yLCAwLCA0LCBwbTg2MHhfcGFfdGV4dHMpOworCitzdGF0aWMg Y29uc3Qgc3RydWN0IHNvY19lbnVtIHBtODYweF9zcGtfZWFyX29wYW1wX2VudW0gPQorCVNPQ19F TlVNX1NJTkdMRShQTTg2MFhfRUFSX0NUUkxfMSwgMywgNCwgcG04NjB4X29wYW1wX3RleHRzKTsK Kworc3RhdGljIGNvbnN0IHN0cnVjdCBzbmRfa2NvbnRyb2xfbmV3IHBtODYweF9zbmRfY29udHJv bHNbXSA9IHsKKwlTT0NfRE9VQkxFX1JfVExWKCJBREMgQ2FwdHVyZSBWb2x1bWUiLCBQTTg2MFhf QURDX0FOQV8yLAorCQkJUE04NjBYX0FEQ19BTkFfMywgNiwgMywgMCwgYWRjX3RsdiksCisJU09D X0RPVUJMRV9UTFYoIkFVWCBDYXB0dXJlIFZvbHVtZSIsIFBNODYwWF9BRENfQU5BXzMsIDAsIDMs IDcsIDAsCisJCQlhdXhfdGx2KSwKKwlTT0NfU0lOR0xFX1RMVigiTUlDMSBDYXB0dXJlIFZvbHVt ZSIsIFBNODYwWF9BRENfQU5BXzIsIDAsIDcsIDAsCisJCQltaWNfdGx2KSwKKwlTT0NfU0lOR0xF X1RMVigiTUlDMyBDYXB0dXJlIFZvbHVtZSIsIFBNODYwWF9BRENfQU5BXzIsIDMsIDcsIDAsCisJ CQltaWNfdGx2KSwKKwlTT0NfRE9VQkxFX1JfRVhUX1RMVigiU2lkZXRvbmUgVm9sdW1lIiwgUE04 NjBYX1NJREVUT05FX0xfR0FJTiwKKwkJCSAgICAgUE04NjBYX1NJREVUT05FX1JfR0FJTiwgMCwg QVJSQVlfU0laRShzdF90YWJsZSktMSwKKwkJCSAgICAgMCwgc25kX3NvY19nZXRfdm9sc3dfMnJf c3QsCisJCQkgICAgIHNuZF9zb2NfcHV0X3ZvbHN3XzJyX3N0LCBzdF90bHYpLAorCVNPQ19TSU5H TEVfVExWKCJTcGVha2VyIFBsYXliYWNrIFZvbHVtZSIsIFBNODYwWF9FQVJfQ1RSTF8xLAorCQkJ MCwgNywgMCwgb3V0X3RsdiksCisJU09DX0RPVUJMRV9SX1RMVigiTGluZSBQbGF5YmFjayBWb2x1 bWUiLCBQTTg2MFhfTE8xX0NUUkwsCisJCQkgUE04NjBYX0xPMl9DVFJMLCAwLCA3LCAwLCBvdXRf dGx2KSwKKwlTT0NfRE9VQkxFX1JfVExWKCJIZWFkc2V0IFBsYXliYWNrIFZvbHVtZSIsIFBNODYw WF9IUzFfQ1RSTCwKKwkJCSBQTTg2MFhfSFMyX0NUUkwsIDAsIDcsIDAsIG91dF90bHYpLAorCVNP Q19ET1VCTEVfUl9FWFRfVExWKCJIaWZpIExlZnQgUGxheWJhY2sgVm9sdW1lIiwKKwkJCSAgICAg UE04NjBYX0hJRklMX0dBSU5fTEVGVCwKKwkJCSAgICAgUE04NjBYX0hJRklMX0dBSU5fUklHSFQs IDAsIDYzLCAwLAorCQkJICAgICBzbmRfc29jX2dldF92b2xzd18ycl9vdXQsCisJCQkgICAgIHNu ZF9zb2NfcHV0X3ZvbHN3XzJyX291dCwgZHBnYV90bHYpLAorCVNPQ19ET1VCTEVfUl9FWFRfVExW KCJIaWZpIFJpZ2h0IFBsYXliYWNrIFZvbHVtZSIsCisJCQkgICAgIFBNODYwWF9ISUZJUl9HQUlO X0xFRlQsCisJCQkgICAgIFBNODYwWF9ISUZJUl9HQUlOX1JJR0hULCAwLCA2MywgMCwKKwkJCSAg ICAgc25kX3NvY19nZXRfdm9sc3dfMnJfb3V0LAorCQkJICAgICBzbmRfc29jX3B1dF92b2xzd18y cl9vdXQsIGRwZ2FfdGx2KSwKKwlTT0NfRE9VQkxFX1JfRVhUX1RMVigiTG9maSBQbGF5YmFjayBW b2x1bWUiLCBQTTg2MFhfTE9GSV9HQUlOX0xFRlQsCisJCQkgICAgIFBNODYwWF9MT0ZJX0dBSU5f UklHSFQsIDAsIDYzLCAwLAorCQkJICAgICBzbmRfc29jX2dldF92b2xzd18ycl9vdXQsCisJCQkg ICAgIHNuZF9zb2NfcHV0X3ZvbHN3XzJyX291dCwgZHBnYV90bHYpLAorCVNPQ19FTlVNKCJIZWFk c2V0MSBPcGVyYXRpb25hbCBBbXBsaWZpZXIgQ3VycmVudCIsCisJCSBwbTg2MHhfaHMxX29wYW1w X2VudW0pLAorCVNPQ19FTlVNKCJIZWFkc2V0MiBPcGVyYXRpb25hbCBBbXBsaWZpZXIgQ3VycmVu dCIsCisJCSBwbTg2MHhfaHMyX29wYW1wX2VudW0pLAorCVNPQ19FTlVNKCJIZWFkc2V0MSBBbXBs aWZpZXIgQ3VycmVudCIsIHBtODYweF9oczFfcGFfZW51bSksCisJU09DX0VOVU0oIkhlYWRzZXQy IEFtcGxpZmllciBDdXJyZW50IiwgcG04NjB4X2hzMl9wYV9lbnVtKSwKKwlTT0NfRU5VTSgiTGlu ZW91dDEgT3BlcmF0aW9uYWwgQW1wbGlmaWVyIEN1cnJlbnQiLAorCQkgcG04NjB4X2xvMV9vcGFt cF9lbnVtKSwKKwlTT0NfRU5VTSgiTGluZW91dDIgT3BlcmF0aW9uYWwgQW1wbGlmaWVyIEN1cnJl bnQiLAorCQkgcG04NjB4X2xvMl9vcGFtcF9lbnVtKSwKKwlTT0NfRU5VTSgiTGluZW91dDEgQW1w bGlmaWVyIEN1cnJlbnQiLCBwbTg2MHhfbG8xX3BhX2VudW0pLAorCVNPQ19FTlVNKCJMaW5lb3V0 MiBBbXBsaWZpZXIgQ3VycmVudCIsIHBtODYweF9sbzJfcGFfZW51bSksCisJU09DX0VOVU0oIlNw ZWFrZXIgT3BlcmF0aW9uYWwgQW1wbGlmaWVyIEN1cnJlbnQiLAorCQkgcG04NjB4X3Nwa19lYXJf b3BhbXBfZW51bSksCisJU09DX0VOVU0oIlNwZWFrZXIgQW1wbGlmaWVyIEN1cnJlbnQiLCBwbTg2 MHhfc3BrX3BhX2VudW0pLAorCVNPQ19FTlVNKCJFYXJwaWVjZSBBbXBsaWZpZXIgQ3VycmVudCIs IHBtODYweF9lYXJfcGFfZW51bSksCit9OworCisvKgorICogREFQTSBDb250cm9scworICovCisK Ky8qIFBDTSBTd2l0Y2ggLyBQQ00gSW50ZXJmYWNlICovCitzdGF0aWMgY29uc3Qgc3RydWN0IHNu ZF9rY29udHJvbF9uZXcgcGNtX3N3aXRjaF9jb250cm9scyA9CisJU09DX0RBUE1fU0lOR0xFKCJT d2l0Y2giLCBQTTg2MFhfQURDX0VOXzIsIDAsIDEsIDApOworCisvKiBBVVgxIFN3aXRjaCAqLwor c3RhdGljIGNvbnN0IHN0cnVjdCBzbmRfa2NvbnRyb2xfbmV3IGF1eDFfc3dpdGNoX2NvbnRyb2xz ID0KKwlTT0NfREFQTV9TSU5HTEUoIlN3aXRjaCIsIFBNODYwWF9BTkFfVE9fQU5BLCA0LCAxLCAw KTsKKworLyogQVVYMiBTd2l0Y2ggKi8KK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc25kX2tjb250cm9s X25ldyBhdXgyX3N3aXRjaF9jb250cm9scyA9CisJU09DX0RBUE1fU0lOR0xFKCJTd2l0Y2giLCBQ TTg2MFhfQU5BX1RPX0FOQSwgNSwgMSwgMCk7CisKKy8qIExlZnQgRXguIFBBIFN3aXRjaCAqLwor c3RhdGljIGNvbnN0IHN0cnVjdCBzbmRfa2NvbnRyb2xfbmV3IGxlcGFfc3dpdGNoX2NvbnRyb2xz ID0KKwlTT0NfREFQTV9TSU5HTEUoIlN3aXRjaCIsIFBNODYwWF9EQUNfRU5fMiwgMiwgMSwgMCk7 CisKKy8qIFJpZ2h0IEV4LiBQQSBTd2l0Y2ggKi8KK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc25kX2tj b250cm9sX25ldyByZXBhX3N3aXRjaF9jb250cm9scyA9CisJU09DX0RBUE1fU0lOR0xFKCJTd2l0 Y2giLCBQTTg2MFhfREFDX0VOXzIsIDEsIDEsIDApOworCisvKiBQQ00gTXV4IC8gTXV4NyAqLwor c3RhdGljIGNvbnN0IGNoYXIgKmFpZjFfdGV4dFtdID0geworCSJQQ00gTCIsICJQQ00gUiIsCit9 OworCitzdGF0aWMgY29uc3Qgc3RydWN0IHNvY19lbnVtIGFpZjFfZW51bSA9CisJU09DX0VOVU1f U0lOR0xFKFBNODYwWF9QQ01fSUZBQ0VfMywgNiwgMiwgYWlmMV90ZXh0KTsKKworc3RhdGljIGNv bnN0IHN0cnVjdCBzbmRfa2NvbnRyb2xfbmV3IGFpZjFfbXV4ID0KKwlTT0NfREFQTV9FTlVNKCJQ Q00gTXV4IiwgYWlmMV9lbnVtKTsKKworLyogSTJTIE11eCAvIE11eDkgKi8KK3N0YXRpYyBjb25z dCBjaGFyICppMnNfZGluX3RleHRbXSA9IHsKKwkiRElOIiwgIkRJTjEiLAorfTsKKworc3RhdGlj IGNvbnN0IHN0cnVjdCBzb2NfZW51bSBpMnNfZGluX2VudW0gPQorCVNPQ19FTlVNX1NJTkdMRShQ TTg2MFhfSTJTX0lGQUNFXzMsIDEsIDIsIGkyc19kaW5fdGV4dCk7CisKK3N0YXRpYyBjb25zdCBz dHJ1Y3Qgc25kX2tjb250cm9sX25ldyBpMnNfZGluX211eCA9CisJU09DX0RBUE1fRU5VTSgiSTJT IERJTiBNdXgiLCBpMnNfZGluX2VudW0pOworCisvKiBJMlMgTWljIE11eCAvIE11eDggKi8KK3N0 YXRpYyBjb25zdCBjaGFyICppMnNfbWljX3RleHRbXSA9IHsKKwkiRXggUEEiLCAiQURDIiwKK307 CisKK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc29jX2VudW0gaTJzX21pY19lbnVtID0KKwlTT0NfRU5V TV9TSU5HTEUoUE04NjBYX0kyU19JRkFDRV8zLCA0LCAyLCBpMnNfbWljX3RleHQpOworCitzdGF0 aWMgY29uc3Qgc3RydWN0IHNuZF9rY29udHJvbF9uZXcgaTJzX21pY19tdXggPQorCVNPQ19EQVBN X0VOVU0oIkkyUyBNaWMgTXV4IiwgaTJzX21pY19lbnVtKTsKKworLyogQURDTCBNdXggLyBNdXgy ICovCitzdGF0aWMgY29uc3QgY2hhciAqYWRjbF90ZXh0W10gPSB7CisJIkFEQ1IiLCAiQURDTCIs Cit9OworCitzdGF0aWMgY29uc3Qgc3RydWN0IHNvY19lbnVtIGFkY2xfZW51bSA9CisJU09DX0VO VU1fU0lOR0xFKFBNODYwWF9QQ01fSUZBQ0VfMywgNCwgMiwgYWRjbF90ZXh0KTsKKworc3RhdGlj IGNvbnN0IHN0cnVjdCBzbmRfa2NvbnRyb2xfbmV3IGFkY2xfbXV4ID0KKwlTT0NfREFQTV9FTlVN KCJBREMgTGVmdCBNdXgiLCBhZGNsX2VudW0pOworCisvKiBBRENSIE11eCAvIE11eDMgKi8KK3N0 YXRpYyBjb25zdCBjaGFyICphZGNyX3RleHRbXSA9IHsKKwkiQURDTCIsICJBRENSIiwKK307CisK K3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc29jX2VudW0gYWRjcl9lbnVtID0KKwlTT0NfRU5VTV9TSU5H TEUoUE04NjBYX1BDTV9JRkFDRV8zLCAyLCAyLCBhZGNyX3RleHQpOworCitzdGF0aWMgY29uc3Qg c3RydWN0IHNuZF9rY29udHJvbF9uZXcgYWRjcl9tdXggPQorCVNPQ19EQVBNX0VOVU0oIkFEQyBS aWdodCBNdXgiLCBhZGNyX2VudW0pOworCisvKiBBRENSIEVDIE11eCAvIE11eDYgKi8KK3N0YXRp YyBjb25zdCBjaGFyICphZGNyX2VjX3RleHRbXSA9IHsKKwkiQURDUiIsICJFQyIsCit9OworCitz dGF0aWMgY29uc3Qgc3RydWN0IHNvY19lbnVtIGFkY3JfZWNfZW51bSA9CisJU09DX0VOVU1fU0lO R0xFKFBNODYwWF9BRENfRU5fMiwgMywgMiwgYWRjcl9lY190ZXh0KTsKKworc3RhdGljIGNvbnN0 IHN0cnVjdCBzbmRfa2NvbnRyb2xfbmV3IGFkY3JfZWNfbXV4ID0KKwlTT0NfREFQTV9FTlVNKCJB RENSIEVDIE11eCIsIGFkY3JfZWNfZW51bSk7CisKKy8qIEVDIE11eCAvIE11eDQgKi8KK3N0YXRp YyBjb25zdCBjaGFyICplY190ZXh0W10gPSB7CisJIkxlZnQiLCAiUmlnaHQiLCAiTGVmdCArIFJp Z2h0IiwKK307CisKK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc29jX2VudW0gZWNfZW51bSA9CisJU09D X0VOVU1fU0lOR0xFKFBNODYwWF9FQ19QQVRILCAxLCAzLCBlY190ZXh0KTsKKworc3RhdGljIGNv bnN0IHN0cnVjdCBzbmRfa2NvbnRyb2xfbmV3IGVjX211eCA9CisJU09DX0RBUE1fRU5VTSgiRUMg TXV4IiwgZWNfZW51bSk7CisKK3N0YXRpYyBjb25zdCBjaGFyICpkYWNfdGV4dFtdID0geworCSJO byBpbnB1dCIsICJSaWdodCIsICJMZWZ0IiwgIk5vIGlucHV0IiwKK307CisKKy8qIERBQyBIZWFk c2V0IDEgTXV4IC8gTXV4MTAgKi8KK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc29jX2VudW0gZGFjX2hz MV9lbnVtID0KKwlTT0NfRU5VTV9TSU5HTEUoUE04NjBYX0FOQV9JTlBVVF9TRUxfMSwgMCwgNCwg ZGFjX3RleHQpOworCitzdGF0aWMgY29uc3Qgc3RydWN0IHNuZF9rY29udHJvbF9uZXcgZGFjX2hz MV9tdXggPQorCVNPQ19EQVBNX0VOVU0oIkRBQyBIUzEgTXV4IiwgZGFjX2hzMV9lbnVtKTsKKwor LyogREFDIEhlYWRzZXQgMiBNdXggLyBNdXgxMSAqLworc3RhdGljIGNvbnN0IHN0cnVjdCBzb2Nf ZW51bSBkYWNfaHMyX2VudW0gPQorCVNPQ19FTlVNX1NJTkdMRShQTTg2MFhfQU5BX0lOUFVUX1NF TF8xLCAyLCA0LCBkYWNfdGV4dCk7CisKK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc25kX2tjb250cm9s X25ldyBkYWNfaHMyX211eCA9CisJU09DX0RBUE1fRU5VTSgiREFDIEhTMiBNdXgiLCBkYWNfaHMy X2VudW0pOworCisvKiBEQUMgTGluZW91dCAxIE11eCAvIE11eDEyICovCitzdGF0aWMgY29uc3Qg c3RydWN0IHNvY19lbnVtIGRhY19sbzFfZW51bSA9CisJU09DX0VOVU1fU0lOR0xFKFBNODYwWF9B TkFfSU5QVVRfU0VMXzEsIDQsIDQsIGRhY190ZXh0KTsKKworc3RhdGljIGNvbnN0IHN0cnVjdCBz bmRfa2NvbnRyb2xfbmV3IGRhY19sbzFfbXV4ID0KKwlTT0NfREFQTV9FTlVNKCJEQUMgTE8xIE11 eCIsIGRhY19sbzFfZW51bSk7CisKKy8qIERBQyBMaW5lb3V0IDIgTXV4IC8gTXV4MTMgKi8KK3N0 YXRpYyBjb25zdCBzdHJ1Y3Qgc29jX2VudW0gZGFjX2xvMl9lbnVtID0KKwlTT0NfRU5VTV9TSU5H TEUoUE04NjBYX0FOQV9JTlBVVF9TRUxfMSwgNiwgNCwgZGFjX3RleHQpOworCitzdGF0aWMgY29u c3Qgc3RydWN0IHNuZF9rY29udHJvbF9uZXcgZGFjX2xvMl9tdXggPQorCVNPQ19EQVBNX0VOVU0o IkRBQyBMTzIgTXV4IiwgZGFjX2xvMl9lbnVtKTsKKworLyogREFDIFNwZWFya2VyIEVhcnBob25l IE11eCAvIE11eDE0ICovCitzdGF0aWMgY29uc3Qgc3RydWN0IHNvY19lbnVtIGRhY19zcGtfZWFy X2VudW0gPQorCVNPQ19FTlVNX1NJTkdMRShQTTg2MFhfQU5BX0lOUFVUX1NFTF8yLCAwLCA0LCBk YWNfdGV4dCk7CisKK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc25kX2tjb250cm9sX25ldyBkYWNfc3Br X2Vhcl9tdXggPQorCVNPQ19EQVBNX0VOVU0oIkRBQyBTUCBNdXgiLCBkYWNfc3BrX2Vhcl9lbnVt KTsKKworLyogSGVhZHNldCAxIE11eCAvIE11eDE1ICovCitzdGF0aWMgY29uc3QgY2hhciAqaW5f dGV4dFtdID0geworCSJEaWdpdGFsIiwgIkFuYWxvZyIsCit9OworCitzdGF0aWMgY29uc3Qgc3Ry dWN0IHNvY19lbnVtIGhzMV9lbnVtID0KKwlTT0NfRU5VTV9TSU5HTEUoUE04NjBYX0FOQV9UT19B TkEsIDAsIDIsIGluX3RleHQpOworCitzdGF0aWMgY29uc3Qgc3RydWN0IHNuZF9rY29udHJvbF9u ZXcgaHMxX211eCA9CisJU09DX0RBUE1fRU5VTSgiSGVhZHNldDEgTXV4IiwgaHMxX2VudW0pOwor CisvKiBIZWFkc2V0IDIgTXV4IC8gTXV4MTYgKi8KK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc29jX2Vu dW0gaHMyX2VudW0gPQorCVNPQ19FTlVNX1NJTkdMRShQTTg2MFhfQU5BX1RPX0FOQSwgMSwgMiwg aW5fdGV4dCk7CisKK3N0YXRpYyBjb25zdCBzdHJ1Y3Qgc25kX2tjb250cm9sX25ldyBoczJfbXV4 ID0KKwlTT0NfREFQTV9FTlVNKCJIZWFkc2V0MiBNdXgiLCBoczJfZW51bSk7CisKKy8qIExpbmVv dXQgMSBNdXggLyBNdXgxNyAqLworc3RhdGljIGNvbnN0IHN0cnVjdCBzb2NfZW51bSBsbzFfZW51 bSA9CisJU09DX0VOVU1fU0lOR0xFKFBNODYwWF9BTkFfVE9fQU5BLCAyLCAyLCBpbl90ZXh0KTsK Kworc3RhdGljIGNvbnN0IHN0cnVjdCBzbmRfa2NvbnRyb2xfbmV3IGxvMV9tdXggPQorCVNPQ19E QVBNX0VOVU0oIkxpbmVvdXQxIE11eCIsIGxvMV9lbnVtKTsKKworLyogTGluZW91dCAyIE11eCAv IE11eDE4ICovCitzdGF0aWMgY29uc3Qgc3RydWN0IHNvY19lbnVtIGxvMl9lbnVtID0KKwlTT0Nf RU5VTV9TSU5HTEUoUE04NjBYX0FOQV9UT19BTkEsIDMsIDIsIGluX3RleHQpOworCitzdGF0aWMg Y29uc3Qgc3RydWN0IHNuZF9rY29udHJvbF9uZXcgbG8yX211eCA9CisJU09DX0RBUE1fRU5VTSgi TGluZW91dDIgTXV4IiwgbG8yX2VudW0pOworCisvKiBTcGVha2VyIEVhcnBpZWNlIERlbXV4ICov CitzdGF0aWMgY29uc3QgY2hhciAqc3BrX3RleHRbXSA9IHsKKwkiRWFycGllY2UiLCAiU3BlYWtl ciIsCit9OworCitzdGF0aWMgY29uc3Qgc3RydWN0IHNvY19lbnVtIHNwa19lbnVtID0KKwlTT0Nf RU5VTV9TSU5HTEUoUE04NjBYX0FOQV9UT19BTkEsIDYsIDIsIHNwa190ZXh0KTsKKworc3RhdGlj IGNvbnN0IHN0cnVjdCBzbmRfa2NvbnRyb2xfbmV3IHNwa19kZW11eCA9CisJU09DX0RBUE1fRU5V TSgiU3BlYWtlciBFYXJwaWVjZSBEZW11eCIsIHNwa19lbnVtKTsKKworLyogTUlDIE11eCAvIE11 eDEgKi8KK3N0YXRpYyBjb25zdCBjaGFyICptaWNfdGV4dFtdID0geworCSJNaWMgMSIsICJNaWMg MiIsCit9OworCitzdGF0aWMgY29uc3Qgc3RydWN0IHNvY19lbnVtIG1pY19lbnVtID0KKwlTT0Nf RU5VTV9TSU5HTEUoUE04NjBYX0FEQ19BTkFfNCwgNCwgMiwgbWljX3RleHQpOworCitzdGF0aWMg Y29uc3Qgc3RydWN0IHNuZF9rY29udHJvbF9uZXcgbWljX211eCA9CisJU09DX0RBUE1fRU5VTSgi TUlDIE11eCIsIG1pY19lbnVtKTsKKworc3RhdGljIGNvbnN0IHN0cnVjdCBzbmRfc29jX2RhcG1f d2lkZ2V0IHBtODYweF9kYXBtX3dpZGdldHNbXSA9IHsKKwlTTkRfU09DX0RBUE1fQUlGX0lOKCJQ Q00gU0RJIiwgIlBDTSBQbGF5YmFjayIsIDAsCisJCQkgICAgUE04NjBYX0FEQ19FTl8yLCAwLCAw KSwKKwlTTkRfU09DX0RBUE1fQUlGX09VVCgiUENNIFNETyIsICJQQ00gQ2FwdHVyZSIsIDAsCisJ CQkgICAgIFBNODYwWF9QQ01fSUZBQ0VfMywgMSwgMSksCisKKworCVNORF9TT0NfREFQTV9BSUZf SU4oIkkyUyBESU4iLCAiSTJTIFBsYXliYWNrIiwgMCwKKwkJCSAgICBQTTg2MFhfREFDX0VOXzIs IDAsIDApLAorCVNORF9TT0NfREFQTV9BSUZfSU4oIkkyUyBESU4xIiwgIkkyUyBQbGF5YmFjayIs IDAsCisJCQkgICAgUE04NjBYX0RBQ19FTl8yLCAwLCAwKSwKKwlTTkRfU09DX0RBUE1fQUlGX09V VCgiSTJTIERPVVQiLCAiSTJTIENhcHR1cmUiLCAwLAorCQkJICAgICBQTTg2MFhfSTJTX0lGQUNF XzMsIDUsIDEpLAorCVNORF9TT0NfREFQTV9NVVgoIkkyUyBNaWMgTXV4IiwgU05EX1NPQ19OT1BN LCAwLCAwLCAmaTJzX21pY19tdXgpLAorCVNORF9TT0NfREFQTV9NVVgoIkFEQyBMZWZ0IE11eCIs IFNORF9TT0NfTk9QTSwgMCwgMCwgJmFkY2xfbXV4KSwKKwlTTkRfU09DX0RBUE1fTVVYKCJBREMg UmlnaHQgTXV4IiwgU05EX1NPQ19OT1BNLCAwLCAwLCAmYWRjcl9tdXgpLAorCVNORF9TT0NfREFQ TV9NVVgoIkVDIE11eCIsIFNORF9TT0NfTk9QTSwgMCwgMCwgJmVjX211eCksCisJU05EX1NPQ19E QVBNX01VWCgiQURDUiBFQyBNdXgiLCBTTkRfU09DX05PUE0sIDAsIDAsICZhZGNyX2VjX211eCks CisJU05EX1NPQ19EQVBNX1NXSVRDSCgiTGVmdCBFUEEiLCBTTkRfU09DX05PUE0sIDAsIDAsCisJ CQkgICAgJmxlcGFfc3dpdGNoX2NvbnRyb2xzKSwKKwlTTkRfU09DX0RBUE1fU1dJVENIKCJSaWdo dCBFUEEiLCBTTkRfU09DX05PUE0sIDAsIDAsCisJCQkgICAgJnJlcGFfc3dpdGNoX2NvbnRyb2xz KSwKKworCVNORF9TT0NfREFQTV9BRENfRSgiTGVmdCBBREMiLCBOVUxMLCBTTkRfU09DX05PUE0s IDAsIDAsCisJCQkgICBwbTg2MHhfYWRjX2V2ZW50LAorCQkJICAgU05EX1NPQ19EQVBNX1BSRV9Q TVUgfCBTTkRfU09DX0RBUE1fUFJFX1BNRCksCisJU05EX1NPQ19EQVBNX0FEQ19FKCJSaWdodCBB REMiLCBOVUxMLCBTTkRfU09DX05PUE0sIDAsIDAsCisJCQkgICBwbTg2MHhfYWRjX2V2ZW50LAor CQkJICAgU05EX1NPQ19EQVBNX1BSRV9QTVUgfCBTTkRfU09DX0RBUE1fUFJFX1BNRCksCisKKwlT TkRfU09DX0RBUE1fU1dJVENIKCJBVVgxIFN3aXRjaCIsIFNORF9TT0NfTk9QTSwgMCwgMCwKKwkJ CSAgICAmYXV4MV9zd2l0Y2hfY29udHJvbHMpLAorCVNORF9TT0NfREFQTV9TV0lUQ0goIkFVWDIg U3dpdGNoIiwgU05EX1NPQ19OT1BNLCAwLCAwLAorCQkJICAgICZhdXgyX3N3aXRjaF9jb250cm9s cyksCisKKwlTTkRfU09DX0RBUE1fTVVYKCJNSUMgTXV4IiwgU05EX1NPQ19OT1BNLCAwLCAwLCAm bWljX211eCksCisJU05EX1NPQ19EQVBNX01JQ0JJQVNfRSgiTWljMSBCaWFzIiwgU05EX1NPQ19O T1BNLCAwLCAwLAorCQkJICAgICAgICZwbTg2MHhfbWljMV9ldmVudCwKKwkJCSAgICAgICBTTkRf U09DX0RBUE1fUE9TVF9QTVUgfCBTTkRfU09DX0RBUE1fUFJFX1BNRCksCisJU05EX1NPQ19EQVBN X01JQ0JJQVMoIk1pYzMgQmlhcyIsIFBNODYwWF9BRENfQU5BXzEsIDcsIDApLAorCVNORF9TT0Nf REFQTV9QR0EoIk1JQzEgVm9sdW1lIiwgUE04NjBYX0FEQ19FTl8xLCAyLCAwLCBOVUxMLCAwKSwK KwlTTkRfU09DX0RBUE1fUEdBKCJNSUMzIFZvbHVtZSIsIFBNODYwWF9BRENfRU5fMSwgMywgMCwg TlVMTCwgMCksCisJU05EX1NPQ19EQVBNX1BHQSgiQVVYMSBWb2x1bWUiLCBQTTg2MFhfQURDX0VO XzEsIDQsIDAsIE5VTEwsIDApLAorCVNORF9TT0NfREFQTV9QR0EoIkFVWDIgVm9sdW1lIiwgUE04 NjBYX0FEQ19FTl8xLCA1LCAwLCBOVUxMLCAwKSwKKwlTTkRfU09DX0RBUE1fUEdBKCJTaWRldG9u ZSBQR0EiLCBQTTg2MFhfQURDX0VOXzIsIDEsIDAsIE5VTEwsIDApLAorCVNORF9TT0NfREFQTV9Q R0EoIkxvZmkgUEdBIiwgUE04NjBYX0FEQ19FTl8yLCAyLCAwLCBOVUxMLCAwKSwKKworCVNORF9T T0NfREFQTV9JTlBVVCgiQVVYMSIpLAorCVNORF9TT0NfREFQTV9JTlBVVCgiQVVYMiIpLAorCVNO RF9TT0NfREFQTV9JTlBVVCgiTUlDMVAiKSwKKwlTTkRfU09DX0RBUE1fSU5QVVQoIk1JQzFOIiks CisJU05EX1NPQ19EQVBNX0lOUFVUKCJNSUMyUCIpLAorCVNORF9TT0NfREFQTV9JTlBVVCgiTUlD Mk4iKSwKKwlTTkRfU09DX0RBUE1fSU5QVVQoIk1JQzNQIiksCisJU05EX1NPQ19EQVBNX0lOUFVU KCJNSUMzTiIpLAorCisJU05EX1NPQ19EQVBNX0RBQ19FKCJMZWZ0IERBQyIsIE5VTEwsIFNORF9T T0NfTk9QTSwgMCwgMCwKKwkJCSAgIHBtODYweF9kYWNfZXZlbnQsCisJCQkgICBTTkRfU09DX0RB UE1fUFJFX1BNVSB8IFNORF9TT0NfREFQTV9QUkVfUE1EKSwKKwlTTkRfU09DX0RBUE1fREFDX0Uo IlJpZ2h0IERBQyIsIE5VTEwsIFNORF9TT0NfTk9QTSwgMCwgMCwKKwkJCSAgIHBtODYweF9kYWNf ZXZlbnQsCisJCQkgICBTTkRfU09DX0RBUE1fUFJFX1BNVSB8IFNORF9TT0NfREFQTV9QUkVfUE1E KSwKKworCVNORF9TT0NfREFQTV9NVVgoIkkyUyBESU4gTXV4IiwgU05EX1NPQ19OT1BNLCAwLCAw LCAmaTJzX2Rpbl9tdXgpLAorCVNORF9TT0NfREFQTV9NVVgoIkRBQyBIUzEgTXV4IiwgU05EX1NP Q19OT1BNLCAwLCAwLCAmZGFjX2hzMV9tdXgpLAorCVNORF9TT0NfREFQTV9NVVgoIkRBQyBIUzIg TXV4IiwgU05EX1NPQ19OT1BNLCAwLCAwLCAmZGFjX2hzMl9tdXgpLAorCVNORF9TT0NfREFQTV9N VVgoIkRBQyBMTzEgTXV4IiwgU05EX1NPQ19OT1BNLCAwLCAwLCAmZGFjX2xvMV9tdXgpLAorCVNO RF9TT0NfREFQTV9NVVgoIkRBQyBMTzIgTXV4IiwgU05EX1NPQ19OT1BNLCAwLCAwLCAmZGFjX2xv Ml9tdXgpLAorCVNORF9TT0NfREFQTV9NVVgoIkRBQyBTUCBNdXgiLCBTTkRfU09DX05PUE0sIDAs IDAsICZkYWNfc3BrX2Vhcl9tdXgpLAorCVNORF9TT0NfREFQTV9NVVgoIkhlYWRzZXQxIE11eCIs IFNORF9TT0NfTk9QTSwgMCwgMCwgJmhzMV9tdXgpLAorCVNORF9TT0NfREFQTV9NVVgoIkhlYWRz ZXQyIE11eCIsIFNORF9TT0NfTk9QTSwgMCwgMCwgJmhzMl9tdXgpLAorCVNORF9TT0NfREFQTV9N VVgoIkxpbmVvdXQxIE11eCIsIFNORF9TT0NfTk9QTSwgMCwgMCwgJmxvMV9tdXgpLAorCVNORF9T T0NfREFQTV9NVVgoIkxpbmVvdXQyIE11eCIsIFNORF9TT0NfTk9QTSwgMCwgMCwgJmxvMl9tdXgp LAorCVNORF9TT0NfREFQTV9NVVgoIlNwZWFrZXIgRWFycGllY2UgRGVtdXgiLCBTTkRfU09DX05P UE0sIDAsIDAsCisJCQkgJnNwa19kZW11eCksCisKKworCVNORF9TT0NfREFQTV9QR0EoIkhlYWRz ZXQxIFBHQSIsIFBNODYwWF9EQUNfRU5fMSwgMCwgMCwgTlVMTCwgMCksCisJU05EX1NPQ19EQVBN X1BHQSgiSGVhZHNldDIgUEdBIiwgUE04NjBYX0RBQ19FTl8xLCAxLCAwLCBOVUxMLCAwKSwKKwlT TkRfU09DX0RBUE1fT1VUUFVUKCJIUzEiKSwKKwlTTkRfU09DX0RBUE1fT1VUUFVUKCJIUzIiKSwK KwlTTkRfU09DX0RBUE1fUEdBKCJMaW5lb3V0MSBQR0EiLCBQTTg2MFhfREFDX0VOXzEsIDIsIDAs IE5VTEwsIDApLAorCVNORF9TT0NfREFQTV9QR0EoIkxpbmVvdXQyIFBHQSIsIFBNODYwWF9EQUNf RU5fMSwgMywgMCwgTlVMTCwgMCksCisJU05EX1NPQ19EQVBNX09VVFBVVCgiTElORU9VVDEiKSwK KwlTTkRfU09DX0RBUE1fT1VUUFVUKCJMSU5FT1VUMiIpLAorCVNORF9TT0NfREFQTV9QR0EoIkVh cnBpZWNlIFBHQSIsIFBNODYwWF9EQUNfRU5fMSwgNCwgMCwgTlVMTCwgMCksCisJU05EX1NPQ19E QVBNX09VVFBVVCgiRUFSUCIpLAorCVNORF9TT0NfREFQTV9PVVRQVVQoIkVBUk4iKSwKKwlTTkRf U09DX0RBUE1fUEdBKCJTcGVha2VyIFBHQSIsIFBNODYwWF9EQUNfRU5fMSwgNSwgMCwgTlVMTCwg MCksCisJU05EX1NPQ19EQVBNX09VVFBVVCgiTFNQIiksCisJU05EX1NPQ19EQVBNX09VVFBVVCgi TFNOIiksCisJU05EX1NPQ19EQVBNX1JFRyhzbmRfc29jX2RhcG1fc3VwcGx5LCAiVkNPREVDIiwg UE04NjBYX0FVRElPX1NVUFBMSUVTXzIsCisJCQkgMCwgU1VQUExZX01BU0ssIFNVUFBMWV9NQVNL LCAwKSwKKworCVNORF9TT0NfREFQTV9QT1NUKCJSU1lOQyIsIHBtODYweF9yc3luY19ldmVudCks Cit9OworCitzdGF0aWMgY29uc3Qgc3RydWN0IHNuZF9zb2NfZGFwbV9yb3V0ZSBhdWRpb19tYXBb XSA9IHsKKwkvKiBzdXBwbHkgKi8KKwl7IkxlZnQgREFDIiwgTlVMTCwgIlZDT0RFQyJ9LAorCXsi UmlnaHQgREFDIiwgTlVMTCwgIlZDT0RFQyJ9LAorCXsiTGVmdCBBREMiLCBOVUxMLCAiVkNPREVD In0sCisJeyJSaWdodCBBREMiLCBOVUxMLCAiVkNPREVDIn0sCisKKwkvKiBQQ00vQUlGMSBJbnB1 dHMgKi8KKwl7IlBDTSBTRE8iLCBOVUxMLCAiQURDIExlZnQgTXV4In0sCisJeyJQQ00gU0RPIiwg TlVMTCwgIkFEQ1IgRUMgTXV4In0sCisKKwkvKiBQQ00vQUZJMiBPdXRwdXRzICovCisJeyJMb2Zp IFBHQSIsIE5VTEwsICJQQ00gU0RJIn0sCisJeyJMb2ZpIFBHQSIsIE5VTEwsICJTaWRldG9uZSBQ R0EifSwKKwl7IkxlZnQgREFDIiwgTlVMTCwgIkxvZmkgUEdBIn0sCisJeyJSaWdodCBEQUMiLCBO VUxMLCAiTG9maSBQR0EifSwKKworCS8qIEkyUy9BSUYyIElucHV0cyAqLworCXsiTUlDIE11eCIs ICJNaWMgMSIsICJNSUMxUCJ9LAorCXsiTUlDIE11eCIsICJNaWMgMSIsICJNSUMxTiJ9LAorCXsi TUlDIE11eCIsICJNaWMgMiIsICJNSUMyUCJ9LAorCXsiTUlDIE11eCIsICJNaWMgMiIsICJNSUMy TiJ9LAorCXsiTUlDMSBWb2x1bWUiLCBOVUxMLCAiTUlDIE11eCJ9LAorCXsiTUlDMyBWb2x1bWUi LCBOVUxMLCAiTUlDM1AifSwKKwl7Ik1JQzMgVm9sdW1lIiwgTlVMTCwgIk1JQzNOIn0sCisJeyJM ZWZ0IEFEQyIsIE5VTEwsICJNSUMxIFZvbHVtZSJ9LAorCXsiUmlnaHQgQURDIiwgTlVMTCwgIk1J QzMgVm9sdW1lIn0sCisJeyJBREMgTGVmdCBNdXgiLCAiQURDUiIsICJSaWdodCBBREMifSwKKwl7 IkFEQyBMZWZ0IE11eCIsICJBRENMIiwgIkxlZnQgQURDIn0sCisJeyJBREMgUmlnaHQgTXV4Iiwg IkFEQ0wiLCAiTGVmdCBBREMifSwKKwl7IkFEQyBSaWdodCBNdXgiLCAiQURDUiIsICJSaWdodCBB REMifSwKKwl7IkxlZnQgRVBBIiwgIlN3aXRjaCIsICJMZWZ0IERBQyJ9LAorCXsiUmlnaHQgRVBB IiwgIlN3aXRjaCIsICJSaWdodCBEQUMifSwKKwl7IkVDIE11eCIsICJMZWZ0IiwgIkxlZnQgREFD In0sCisJeyJFQyBNdXgiLCAiUmlnaHQiLCAiUmlnaHQgREFDIn0sCisJeyJFQyBNdXgiLCAiTGVm dCArIFJpZ2h0IiwgIkxlZnQgREFDIn0sCisJeyJFQyBNdXgiLCAiTGVmdCArIFJpZ2h0IiwgIlJp Z2h0IERBQyJ9LAorCXsiQURDUiBFQyBNdXgiLCAiQURDUiIsICJBREMgUmlnaHQgTXV4In0sCisJ eyJBRENSIEVDIE11eCIsICJFQyIsICJFQyBNdXgifSwKKwl7IkkyUyBNaWMgTXV4IiwgIkV4IFBB IiwgIkxlZnQgRVBBIn0sCisJeyJJMlMgTWljIE11eCIsICJFeCBQQSIsICJSaWdodCBFUEEifSwK Kwl7IkkyUyBNaWMgTXV4IiwgIkFEQyIsICJBREMgTGVmdCBNdXgifSwKKwl7IkkyUyBNaWMgTXV4 IiwgIkFEQyIsICJBRENSIEVDIE11eCJ9LAorCXsiSTJTIERPVVQiLCBOVUxMLCAiSTJTIE1pYyBN dXgifSwKKworCS8qIEkyUy9BSUYyIE91dHB1dHMgKi8KKwl7IkkyUyBESU4gTXV4IiwgIkRJTiIs ICJJMlMgRElOIn0sCisJeyJJMlMgRElOIE11eCIsICJESU4xIiwgIkkyUyBESU4xIn0sCisJeyJM ZWZ0IERBQyIsIE5VTEwsICJJMlMgRElOIE11eCJ9LAorCXsiUmlnaHQgREFDIiwgTlVMTCwgIkky UyBESU4gTXV4In0sCisJeyJEQUMgSFMxIE11eCIsICJMZWZ0IiwgIkxlZnQgREFDIn0sCisJeyJE QUMgSFMxIE11eCIsICJSaWdodCIsICJSaWdodCBEQUMifSwKKwl7IkRBQyBIUzIgTXV4IiwgIkxl ZnQiLCAiTGVmdCBEQUMifSwKKwl7IkRBQyBIUzIgTXV4IiwgIlJpZ2h0IiwgIlJpZ2h0IERBQyJ9 LAorCXsiREFDIExPMSBNdXgiLCAiTGVmdCIsICJMZWZ0IERBQyJ9LAorCXsiREFDIExPMSBNdXgi LCAiUmlnaHQiLCAiUmlnaHQgREFDIn0sCisJeyJEQUMgTE8yIE11eCIsICJMZWZ0IiwgIkxlZnQg REFDIn0sCisJeyJEQUMgTE8yIE11eCIsICJSaWdodCIsICJSaWdodCBEQUMifSwKKwl7IkhlYWRz ZXQxIE11eCIsICJEaWdpdGFsIiwgIkRBQyBIUzEgTXV4In0sCisJeyJIZWFkc2V0MiBNdXgiLCAi RGlnaXRhbCIsICJEQUMgSFMyIE11eCJ9LAorCXsiTGluZW91dDEgTXV4IiwgIkRpZ2l0YWwiLCAi REFDIExPMSBNdXgifSwKKwl7IkxpbmVvdXQyIE11eCIsICJEaWdpdGFsIiwgIkRBQyBMTzIgTXV4 In0sCisJeyJIZWFkc2V0MSBQR0EiLCBOVUxMLCAiSGVhZHNldDEgTXV4In0sCisJeyJIZWFkc2V0 MiBQR0EiLCBOVUxMLCAiSGVhZHNldDIgTXV4In0sCisJeyJMaW5lb3V0MSBQR0EiLCBOVUxMLCAi TGluZW91dDEgTXV4In0sCisJeyJMaW5lb3V0MiBQR0EiLCBOVUxMLCAiTGluZW91dDIgTXV4In0s CisJeyJEQUMgU1AgTXV4IiwgIkxlZnQiLCAiTGVmdCBEQUMifSwKKwl7IkRBQyBTUCBNdXgiLCAi UmlnaHQiLCAiUmlnaHQgREFDIn0sCisJeyJTcGVha2VyIEVhcnBpZWNlIERlbXV4IiwgIlNwZWFr ZXIiLCAiREFDIFNQIE11eCJ9LAorCXsiU3BlYWtlciBQR0EiLCBOVUxMLCAiU3BlYWtlciBFYXJw aWVjZSBEZW11eCJ9LAorCXsiRWFycGllY2UgUEdBIiwgTlVMTCwgIlNwZWFrZXIgRWFycGllY2Ug RGVtdXgifSwKKworCXsiSFMxIiwgTlVMTCwgIkhlYWRzZXQxIFBHQSJ9LAorCXsiSFMyIiwgTlVM TCwgIkhlYWRzZXQyIFBHQSJ9LAorCXsiTElORU9VVDEiLCBOVUxMLCAiTGluZW91dDEgUEdBIn0s CisJeyJMSU5FT1VUMiIsIE5VTEwsICJMaW5lb3V0MiBQR0EifSwKKwl7IkxTUCIsIE5VTEwsICJT cGVha2VyIFBHQSJ9LAorCXsiTFNOIiwgTlVMTCwgIlNwZWFrZXIgUEdBIn0sCisJeyJFQVJQIiwg TlVMTCwgIkVhcnBpZWNlIFBHQSJ9LAorCXsiRUFSTiIsIE5VTEwsICJFYXJwaWVjZSBQR0EifSwK K307CisKK3N0YXRpYyBpbnQgcG04NjB4X2RpZ2l0YWxfbXV0ZShzdHJ1Y3Qgc25kX3NvY19kYWkg KmNvZGVjX2RhaSwgaW50IG11dGUpCit7CisJc3RydWN0IHNuZF9zb2NfY29kZWMgKmNvZGVjID0g Y29kZWNfZGFpLT5jb2RlYzsKKwlpbnQgZGF0YSA9IDA7CisKKwlpZiAobXV0ZSkKKwkJZGF0YSA9 IERBQ19NVVRFOworCXNuZF9zb2NfdXBkYXRlX2JpdHMoY29kZWMsIFBNODYwWF9EQUNfT0ZGU0VU LCBEQUNfTVVURSwgZGF0YSk7CisJc25kX3NvY191cGRhdGVfYml0cyhjb2RlYywgUE04NjBYX0VB Ul9DVFJMXzIsCisJCQkgICAgUlNZTkNfQ0hBTkdFLCBSU1lOQ19DSEFOR0UpOworCXJldHVybiAw OworfQorCitzdGF0aWMgaW50IHNldF9kYWlfZm10KHN0cnVjdCBwbTg2MHhfcHJpdiAqcG04NjB4 LCB1bnNpZ25lZCBpbnQgZm10LAorCQkgICAgICAgdW5zaWduZWQgY2hhciAqaW5mLCB1bnNpZ25l ZCBjaGFyICptYXNrKQoreworCSptYXNrIHw9IFBDTV9JTkYyX0JDTEsgfCBQQ01fSU5GMl9GUyB8 IFBDTV9JTkYyX01BU1RFUjsKKworCS8qIHNldCBtYXN0ZXIvc2xhdmUgYXVkaW8gaW50ZXJmYWNl ICovCisJc3dpdGNoIChmbXQgJiBTTkRfU09DX0RBSUZNVF9NQVNURVJfTUFTSykgeworCWNhc2Ug U05EX1NPQ19EQUlGTVRfQ0JNX0NGTToKKwljYXNlIFNORF9TT0NfREFJRk1UX0NCTV9DRlM6CisJ CWlmIChwbTg2MHgtPmRpciA9PSBQTTg2MFhfQ0xLX0RJUl9PVVQpCisJCQkqaW5mIHw9IFBDTV9J TkYyX01BU1RFUjsKKwkJZWxzZQorCQkJcmV0dXJuIC1FSU5WQUw7CisJCWJyZWFrOworCWNhc2Ug U05EX1NPQ19EQUlGTVRfQ0JTX0NGUzoKKwkJaWYgKHBtODYweC0+ZGlyID09IFBNODYwWF9DTEtf RElSX0lOKQorCQkJKmluZiAmPSB+UENNX0lORjJfTUFTVEVSOworCQllbHNlCisJCQlyZXR1cm4g LUVJTlZBTDsKKwkJYnJlYWs7CisJZGVmYXVsdDoKKwkJcmV0dXJuIC1FSU5WQUw7CisJfQorCisJ c3dpdGNoIChmbXQgJiBTTkRfU09DX0RBSUZNVF9GT1JNQVRfTUFTSykgeworCWNhc2UgU05EX1NP Q19EQUlGTVRfSTJTOgorCQkqaW5mIHw9IFBDTV9FWEFDVF9JMlM7CisJCWJyZWFrOworCWRlZmF1 bHQ6CisJCXJldHVybiAtRUlOVkFMOworCX0KKwkqbWFzayB8PSBQQ01fTU9ERV9NQVNLOworCXJl dHVybiAwOworfQorCitzdGF0aWMgaW50IHBtODYweF9wY21faHdfcGFyYW1zKHN0cnVjdCBzbmRf cGNtX3N1YnN0cmVhbSAqc3Vic3RyZWFtLAorCQkJCXN0cnVjdCBzbmRfcGNtX2h3X3BhcmFtcyAq cGFyYW1zLAorCQkJCXN0cnVjdCBzbmRfc29jX2RhaSAqZGFpKQoreworCXN0cnVjdCBzbmRfc29j X2NvZGVjICpjb2RlYyA9IGRhaS0+Y29kZWM7CisJdW5zaWduZWQgY2hhciBpbmYgPSAwLCBtYXNr ID0gMDsKKworCS8qIGJpdCBzaXplICovCisJc3dpdGNoIChwYXJhbXNfZm9ybWF0KHBhcmFtcykp IHsKKwljYXNlIFNORFJWX1BDTV9GT1JNQVRfUzE2X0xFOgorCQlpbmYgJj0gflBDTV9JTkYyXzE4 V0w7CisJCWJyZWFrOworCWNhc2UgU05EUlZfUENNX0ZPUk1BVF9TMThfM0xFOgorCQlpbmYgfD0g UENNX0lORjJfMThXTDsKKwkJYnJlYWs7CisJZGVmYXVsdDoKKwkJcmV0dXJuIC1FSU5WQUw7CisJ fQorCW1hc2sgfD0gUENNX0lORjJfMThXTDsKKwlzbmRfc29jX3VwZGF0ZV9iaXRzKGNvZGVjLCBQ TTg2MFhfUENNX0lGQUNFXzIsIG1hc2ssIGluZik7CisKKwkvKiBzYW1wbGUgcmF0ZSAqLworCXN3 aXRjaCAocGFyYW1zX3JhdGUocGFyYW1zKSkgeworCWNhc2UgODAwMDoKKwkJaW5mID0gMDsKKwkJ YnJlYWs7CisJY2FzZSAxNjAwMDoKKwkJaW5mID0gMzsKKwkJYnJlYWs7CisJY2FzZSAzMjAwMDoK KwkJaW5mID0gNjsKKwkJYnJlYWs7CisJY2FzZSA0ODAwMDoKKwkJaW5mID0gODsKKwkJYnJlYWs7 CisJZGVmYXVsdDoKKwkJcmV0dXJuIC1FSU5WQUw7CisJfQorCXNuZF9zb2NfdXBkYXRlX2JpdHMo Y29kZWMsIFBNODYwWF9QQ01fUkFURSwgMHgwZiwgaW5mKTsKKworCXJldHVybiAwOworfQorCitz dGF0aWMgaW50IHBtODYweF9wY21fc2V0X2RhaV9mbXQoc3RydWN0IHNuZF9zb2NfZGFpICpjb2Rl Y19kYWksCisJCQkJICB1bnNpZ25lZCBpbnQgZm10KQoreworCXN0cnVjdCBzbmRfc29jX2NvZGVj ICpjb2RlYyA9IGNvZGVjX2RhaS0+Y29kZWM7CisJc3RydWN0IHBtODYweF9wcml2ICpwbTg2MHgg PSBzbmRfc29jX2NvZGVjX2dldF9kcnZkYXRhKGNvZGVjKTsKKwl1bnNpZ25lZCBjaGFyIGluZiA9 IDAsIG1hc2sgPSAwOworCWludCByZXQ7CisKKwlyZXQgPSBzZXRfZGFpX2ZtdChwbTg2MHgsIGZt dCwgJmluZiwgJm1hc2spOworCWlmICghcmV0KQorCQlzbmRfc29jX3VwZGF0ZV9iaXRzKGNvZGVj LCBQTTg2MFhfUENNX0lGQUNFXzIsIG1hc2ssIGluZik7CisJcmV0dXJuIHJldDsKK30KKworc3Rh dGljIGludCBwbTg2MHhfc2V0X2RhaV9zeXNjbGsoc3RydWN0IHNuZF9zb2NfZGFpICpjb2RlY19k YWksCisJCQkJIGludCBjbGtfaWQsIHVuc2lnbmVkIGludCBmcmVxLCBpbnQgZGlyKQoreworCXN0 cnVjdCBzbmRfc29jX2NvZGVjICpjb2RlYyA9IGNvZGVjX2RhaS0+Y29kZWM7CisJc3RydWN0IHBt ODYweF9wcml2ICpwbTg2MHggPSBzbmRfc29jX2NvZGVjX2dldF9kcnZkYXRhKGNvZGVjKTsKKwor CWlmIChkaXIgPT0gUE04NjBYX0NMS19ESVJfT1VUKQorCQlwbTg2MHgtPmRpciA9IFBNODYwWF9D TEtfRElSX09VVDsKKwllbHNlCisJCXBtODYweC0+ZGlyID0gUE04NjBYX0NMS19ESVJfSU47CisK KwlyZXR1cm4gMDsKK30KKworc3RhdGljIGludCBwbTg2MHhfaTJzX2h3X3BhcmFtcyhzdHJ1Y3Qg c25kX3BjbV9zdWJzdHJlYW0gKnN1YnN0cmVhbSwKKwkJCQlzdHJ1Y3Qgc25kX3BjbV9od19wYXJh bXMgKnBhcmFtcywKKwkJCQlzdHJ1Y3Qgc25kX3NvY19kYWkgKmRhaSkKK3sKKwlzdHJ1Y3Qgc25k X3NvY19jb2RlYyAqY29kZWMgPSBkYWktPmNvZGVjOworCXVuc2lnbmVkIGNoYXIgaW5mOworCisJ LyogYml0IHNpemUgKi8KKwlzd2l0Y2ggKHBhcmFtc19mb3JtYXQocGFyYW1zKSkgeworCWNhc2Ug U05EUlZfUENNX0ZPUk1BVF9TMTZfTEU6CisJCWluZiA9IDA7CisJCWJyZWFrOworCWNhc2UgU05E UlZfUENNX0ZPUk1BVF9TMThfM0xFOgorCQlpbmYgPSBQQ01fSU5GMl8xOFdMOworCQlicmVhazsK KwlkZWZhdWx0OgorCQlyZXR1cm4gLUVJTlZBTDsKKwl9CisJc25kX3NvY191cGRhdGVfYml0cyhj b2RlYywgUE04NjBYX0kyU19JRkFDRV8yLCBQQ01fSU5GMl8xOFdMLCBpbmYpOworCisJLyogc2Ft cGxlIHJhdGUgKi8KKwlzd2l0Y2ggKHBhcmFtc19yYXRlKHBhcmFtcykpIHsKKwljYXNlIDgwMDA6 CisJCWluZiA9IDA7CisJCWJyZWFrOworCWNhc2UgMTEwMjU6CisJCWluZiA9IDE7CisJCWJyZWFr OworCWNhc2UgMTYwMDA6CisJCWluZiA9IDM7CisJCWJyZWFrOworCWNhc2UgMjIwNTA6CisJCWlu ZiA9IDQ7CisJCWJyZWFrOworCWNhc2UgMzIwMDA6CisJCWluZiA9IDY7CisJCWJyZWFrOworCWNh c2UgNDQxMDA6CisJCWluZiA9IDc7CisJCWJyZWFrOworCWNhc2UgNDgwMDA6CisJCWluZiA9IDg7 CisJCWJyZWFrOworCWRlZmF1bHQ6CisJCXJldHVybiAtRUlOVkFMOworCX0KKwlzbmRfc29jX3Vw ZGF0ZV9iaXRzKGNvZGVjLCBQTTg2MFhfSTJTX0lGQUNFXzQsIDB4ZiwgaW5mKTsKKworCXJldHVy biAwOworfQorCitzdGF0aWMgaW50IHBtODYweF9pMnNfc2V0X2RhaV9mbXQoc3RydWN0IHNuZF9z b2NfZGFpICpjb2RlY19kYWksCisJCQkJICB1bnNpZ25lZCBpbnQgZm10KQoreworCXN0cnVjdCBz bmRfc29jX2NvZGVjICpjb2RlYyA9IGNvZGVjX2RhaS0+Y29kZWM7CisJc3RydWN0IHBtODYweF9w cml2ICpwbTg2MHggPSBzbmRfc29jX2NvZGVjX2dldF9kcnZkYXRhKGNvZGVjKTsKKwl1bnNpZ25l ZCBjaGFyIGluZiA9IDAsIG1hc2sgPSAwOworCWludCByZXQ7CisKKwlyZXQgPSBzZXRfZGFpX2Zt dChwbTg2MHgsIGZtdCwgJmluZiwgJm1hc2spOworCWlmICghcmV0KQorCQlzbmRfc29jX3VwZGF0 ZV9iaXRzKGNvZGVjLCBQTTg2MFhfSTJTX0lGQUNFXzIsIG1hc2ssIGluZik7CisJcmV0dXJuIHJl dDsKK30KKworc3RhdGljIGludCBwbTg2MHhfc2V0X2JpYXNfbGV2ZWwoc3RydWN0IHNuZF9zb2Nf Y29kZWMgKmNvZGVjLAorCQkJCSBlbnVtIHNuZF9zb2NfYmlhc19sZXZlbCBsZXZlbCkKK3sKKwlp bnQgZGF0YTsKKworCXN3aXRjaCAobGV2ZWwpIHsKKwljYXNlIFNORF9TT0NfQklBU19PTjoKKwkJ YnJlYWs7CisKKwljYXNlIFNORF9TT0NfQklBU19QUkVQQVJFOgorCQlicmVhazsKKworCWNhc2Ug U05EX1NPQ19CSUFTX1NUQU5EQlk6CisJCWlmIChjb2RlYy0+Ymlhc19sZXZlbCA9PSBTTkRfU09D X0JJQVNfT0ZGKSB7CisJCQkvKiBFbmFibGUgQXVkaW8gUExMICYgQXVkaW8gc2VjdGlvbiAqLwor CQkJZGF0YSA9IEFVRElPX1BMTCB8IEFVRElPX1NFQ1RJT05fUkVTRVQKKwkJCQl8IEFVRElPX1NF Q1RJT05fT047CisJCQlwbTg2MHhfcmVnX3dyaXRlKGNvZGVjLT5jb250cm9sX2RhdGEsIFJFR19N SVNDMiwgZGF0YSk7CisJCX0KKwkJYnJlYWs7CisKKwljYXNlIFNORF9TT0NfQklBU19PRkY6CisJ CWRhdGEgPSBBVURJT19QTEwgfCBBVURJT19TRUNUSU9OX1JFU0VUIHwgQVVESU9fU0VDVElPTl9P TjsKKwkJcG04NjB4X3NldF9iaXRzKGNvZGVjLT5jb250cm9sX2RhdGEsIFJFR19NSVNDMiwgZGF0 YSwgMCk7CisJCWJyZWFrOworCX0KKwljb2RlYy0+Ymlhc19sZXZlbCA9IGxldmVsOworCXJldHVy biAwOworfQorCitzdGF0aWMgc3RydWN0IHNuZF9zb2NfZGFpX29wcyBwbTg2MHhfcGNtX2RhaV9v cHMgPSB7CisJLmRpZ2l0YWxfbXV0ZQk9IHBtODYweF9kaWdpdGFsX211dGUsCisJLmh3X3BhcmFt cwk9IHBtODYweF9wY21faHdfcGFyYW1zLAorCS5zZXRfZm10CT0gcG04NjB4X3BjbV9zZXRfZGFp X2ZtdCwKKwkuc2V0X3N5c2Nsawk9IHBtODYweF9zZXRfZGFpX3N5c2NsaywKK307CisKK3N0YXRp YyBzdHJ1Y3Qgc25kX3NvY19kYWlfb3BzIHBtODYweF9pMnNfZGFpX29wcyA9IHsKKwkuZGlnaXRh bF9tdXRlCT0gcG04NjB4X2RpZ2l0YWxfbXV0ZSwKKwkuaHdfcGFyYW1zCT0gcG04NjB4X2kyc19o d19wYXJhbXMsCisJLnNldF9mbXQJPSBwbTg2MHhfaTJzX3NldF9kYWlfZm10LAorCS5zZXRfc3lz Y2xrCT0gcG04NjB4X3NldF9kYWlfc3lzY2xrLAorfTsKKworI2RlZmluZSBQTTg2MFhfUkFURVMJ KFNORFJWX1BDTV9SQVRFXzgwMDAgfCBTTkRSVl9QQ01fUkFURV8xNjAwMCB8CVwKKwkJCSBTTkRS Vl9QQ01fUkFURV8zMjAwMCB8IFNORFJWX1BDTV9SQVRFXzQ4MDAwKQorCitzdGF0aWMgc3RydWN0 IHNuZF9zb2NfZGFpX2RyaXZlciBwbTg2MHhfZGFpW10gPSB7CisJeworCQkvKiBEQUkgUENNICov CisJCS5uYW1lCT0gIjg4cG04NjB4LXBjbSIsCisJCS5pZAk9IDEsCisJCS5wbGF5YmFjayA9IHsK KwkJCS5zdHJlYW1fbmFtZQk9ICJQQ00gUGxheWJhY2siLAorCQkJLmNoYW5uZWxzX21pbgk9IDIs CisJCQkuY2hhbm5lbHNfbWF4CT0gMiwKKwkJCS5yYXRlcwkJPSBQTTg2MFhfUkFURVMsCisJCQku Zm9ybWF0cwk9IFNORFJWX1BDTV9GT1JNQVRfUzE2X0xFIHwgXAorCQkJCQkgIFNORFJWX1BDTV9G T1JNQVRfUzE4XzNMRSwKKwkJfSwKKwkJLmNhcHR1cmUgPSB7CisJCQkuc3RyZWFtX25hbWUJPSAi UENNIENhcHR1cmUiLAorCQkJLmNoYW5uZWxzX21pbgk9IDIsCisJCQkuY2hhbm5lbHNfbWF4CT0g MiwKKwkJCS5yYXRlcwkJPSBQTTg2MFhfUkFURVMsCisJCQkuZm9ybWF0cwk9IFNORFJWX1BDTV9G T1JNQVRfUzE2X0xFIHwgXAorCQkJCQkgIFNORFJWX1BDTV9GT1JNQVRfUzE4XzNMRSwKKwkJfSwK KwkJLm9wcwk9ICZwbTg2MHhfcGNtX2RhaV9vcHMsCisJfSwgeworCQkvKiBEQUkgSTJTICovCisJ CS5uYW1lCT0gIjg4cG04NjB4LWkycyIsCisJCS5pZAk9IDIsCisJCS5wbGF5YmFjayA9IHsKKwkJ CS5zdHJlYW1fbmFtZQk9ICJJMlMgUGxheWJhY2siLAorCQkJLmNoYW5uZWxzX21pbgk9IDIsCisJ CQkuY2hhbm5lbHNfbWF4CT0gMiwKKwkJCS5yYXRlcwkJPSBTTkRSVl9QQ01fUkFURV84MDAwXzQ4 MDAwLAorCQkJLmZvcm1hdHMJPSBTTkRSVl9QQ01fRk9STUFUX1MxNl9MRSB8IFwKKwkJCQkJICBT TkRSVl9QQ01fRk9STUFUX1MxOF8zTEUsCisJCX0sCisJCS5jYXB0dXJlID0geworCQkJLnN0cmVh bV9uYW1lCT0gIkkyUyBDYXB0dXJlIiwKKwkJCS5jaGFubmVsc19taW4JPSAyLAorCQkJLmNoYW5u ZWxzX21heAk9IDIsCisJCQkucmF0ZXMJCT0gU05EUlZfUENNX1JBVEVfODAwMF80ODAwMCwKKwkJ CS5mb3JtYXRzCT0gU05EUlZfUENNX0ZPUk1BVF9TMTZfTEUgfCBcCisJCQkJCSAgU05EUlZfUENN X0ZPUk1BVF9TMThfM0xFLAorCQl9LAorCQkub3BzCT0gJnBtODYweF9pMnNfZGFpX29wcywKKwl9 LAorfTsKKworc3RhdGljIGlycXJldHVybl90IHBtODYweF9jb2RlY19oYW5kbGVyKGludCBpcnEs IHZvaWQgKmRhdGEpCit7CisJc3RydWN0IHBtODYweF9wcml2ICpwbTg2MHggPSBkYXRhOworCWlu dCBzdGF0dXMsIHNocnQsIHJlcG9ydCA9IDA7CisKKwlzdGF0dXMgPSBwbTg2MHhfcmVnX3JlYWQo cG04NjB4LT5pMmMsIFJFR19TVEFUVVNfMSk7CisJc2hydCA9IHBtODYweF9yZWdfcmVhZChwbTg2 MHgtPmkyYywgUkVHX1NIT1JUUyk7CisKKwlpZiAoc3RhdHVzICYgSEVBRFNFVF9TVEFUVVMpCisJ CXJlcG9ydCB8PSBQTTg2MFhfREVUX0hFQURTRVQ7CisJaWYgKHN0YXR1cyAmIE1JQ19TVEFUVVMp CisJCXJlcG9ydCB8PSBQTTg2MFhfREVUX01JQzsKKwlpZiAoc3RhdHVzICYgSE9PS19TVEFUVVMp CisJCXJlcG9ydCB8PSBQTTg2MFhfREVUX0hPT0s7CisJaWYgKHNocnQgJiAoU0hPUlRfTE8xIHwg U0hPUlRfTE8yKSkKKwkJcmVwb3J0IHw9IFBNODYwWF9TSE9SVF9MSU5FT1VUOworCWlmIChzaHJ0 ICYgKFNIT1JUX0hTMSB8IFNIT1JUX0hTMikpCisJCXJlcG9ydCB8PSBQTTg2MFhfU0hPUlRfSEVB RFNFVDsKKwlkZXZfZGJnKHBtODYweC0+Y29kZWMtPmRldiwgInJlcG9ydDoweCV4XG4iLCByZXBv cnQpOworCXJldHVybiBJUlFfSEFORExFRDsKK30KKworc3RhdGljIGludCBwbTg2MHhfcHJvYmUo c3RydWN0IHNuZF9zb2NfY29kZWMgKmNvZGVjKQoreworCXN0cnVjdCBwbTg2MHhfcHJpdiAqcG04 NjB4ID0gc25kX3NvY19jb2RlY19nZXRfZHJ2ZGF0YShjb2RlYyk7CisJaW50IGksIHJldDsKKwor CXBtODYweC0+Y29kZWMgPSBjb2RlYzsKKworCWNvZGVjLT5jb250cm9sX2RhdGEgPSBwbTg2MHgt PmkyYzsKKworCWZvciAoaSA9IDA7IGkgPCA0OyBpKyspIHsKKwkJcmV0ID0gcmVxdWVzdF90aHJl YWRlZF9pcnEocG04NjB4LT5pcnFbaV0sIE5VTEwsCisJCQkJCSAgIHBtODYweF9jb2RlY19oYW5k bGVyLCBJUlFGX09ORVNIT1QsCisJCQkJCSAgIHBtODYweC0+bmFtZVtpXSwgcG04NjB4KTsKKwkJ aWYgKHJldCA8IDApIHsKKwkJCWRldl9lcnIoY29kZWMtPmRldiwgIkZhaWxlZCB0byByZXF1ZXN0 IElSUSFcbiIpOworCQkJZ290byBvdXRfaXJxOworCQl9CisJfQorCisJcG04NjB4X3NldF9iaWFz X2xldmVsKGNvZGVjLCBTTkRfU09DX0JJQVNfU1RBTkRCWSk7CisKKwlyZXQgPSBwbTg2MHhfYnVs a19yZWFkKGNvZGVjLT5jb250cm9sX2RhdGEsIFJFR19DQUNIRV9CQVNFLAorCQkJICAgICAgIFJF R19DQUNIRV9TSVpFLCBjb2RlYy0+cmVnX2NhY2hlKTsKKwlpZiAocmV0IDwgMCkgeworCQlkZXZf ZXJyKGNvZGVjLT5kZXYsICJGYWlsZWQgdG8gZmlsbCByZWdpc3RlciBjYWNoZTogJWRcbiIsCisJ CQlyZXQpOworCQlnb3RvIG91dF9jb2RlYzsKKwl9CisKKwlzbmRfc29jX2FkZF9jb250cm9scyhj b2RlYywgcG04NjB4X3NuZF9jb250cm9scywKKwkJCSAgICAgQVJSQVlfU0laRShwbTg2MHhfc25k X2NvbnRyb2xzKSk7CisJc25kX3NvY19kYXBtX25ld19jb250cm9scyhjb2RlYywgcG04NjB4X2Rh cG1fd2lkZ2V0cywKKwkJCQkgIEFSUkFZX1NJWkUocG04NjB4X2RhcG1fd2lkZ2V0cykpOworCXNu ZF9zb2NfZGFwbV9hZGRfcm91dGVzKGNvZGVjLCBhdWRpb19tYXAsIEFSUkFZX1NJWkUoYXVkaW9f bWFwKSk7CisJcmV0dXJuIDA7CisKK291dF9jb2RlYzoKKwlpID0gMzsKK291dF9pcnE6CisJZm9y ICg7IGkgPj0gMDsgaS0tKQorCQlmcmVlX2lycShwbTg2MHgtPmlycVtpXSwgcG04NjB4KTsKKwly ZXR1cm4gLUVJTlZBTDsKK30KKworc3RhdGljIGludCBwbTg2MHhfcmVtb3ZlKHN0cnVjdCBzbmRf c29jX2NvZGVjICpjb2RlYykKK3sKKwlzdHJ1Y3QgcG04NjB4X3ByaXYgKnBtODYweCA9IHNuZF9z b2NfY29kZWNfZ2V0X2RydmRhdGEoY29kZWMpOworCWludCBpOworCisJZm9yIChpID0gMzsgaSA+ PSAwOyBpLS0pCisJCWZyZWVfaXJxKHBtODYweC0+aXJxW2ldLCBwbTg2MHgpOworCXBtODYweF9z ZXRfYmlhc19sZXZlbChjb2RlYywgU05EX1NPQ19CSUFTX09GRik7CisJcmV0dXJuIDA7Cit9CisK K3N0YXRpYyBzdHJ1Y3Qgc25kX3NvY19jb2RlY19kcml2ZXIgc29jX2NvZGVjX2Rldl9wbTg2MHgg PSB7CisJLnByb2JlCQk9IHBtODYweF9wcm9iZSwKKwkucmVtb3ZlCQk9IHBtODYweF9yZW1vdmUs CisJLnJlYWQJCT0gcG04NjB4X3JlYWRfcmVnX2NhY2hlLAorCS53cml0ZQkJPSBwbTg2MHhfd3Jp dGVfcmVnX2NhY2hlLAorCS5yZWdfY2FjaGVfc2l6ZQk9IFJFR19DQUNIRV9TSVpFLAorCS5yZWdf d29yZF9zaXplCT0gc2l6ZW9mKHU4KSwKKwkuc2V0X2JpYXNfbGV2ZWwJPSBwbTg2MHhfc2V0X2Jp YXNfbGV2ZWwsCit9OworCitzdGF0aWMgaW50IF9fZGV2aW5pdCBwbTg2MHhfY29kZWNfcHJvYmUo c3RydWN0IHBsYXRmb3JtX2RldmljZSAqcGRldikKK3sKKwlzdHJ1Y3QgcG04NjB4X2NoaXAgKmNo aXAgPSBkZXZfZ2V0X2RydmRhdGEocGRldi0+ZGV2LnBhcmVudCk7CisJc3RydWN0IHBtODYweF9w cml2ICpwbTg2MHg7CisJc3RydWN0IHJlc291cmNlICpyZXM7CisJaW50IGksIHJldDsKKworCXBt ODYweCA9IGt6YWxsb2Moc2l6ZW9mKHN0cnVjdCBwbTg2MHhfcHJpdiksIEdGUF9LRVJORUwpOwor CWlmIChwbTg2MHggPT0gTlVMTCkKKwkJcmV0dXJuIC1FTk9NRU07CisKKwlwbTg2MHgtPmNoaXAg PSBjaGlwOworCXBtODYweC0+aTJjID0gKGNoaXAtPmlkID09IENISVBfUE04NjA3KSA/IGNoaXAt PmNsaWVudAorCQkJOiBjaGlwLT5jb21wYW5pb247CisJcGxhdGZvcm1fc2V0X2RydmRhdGEocGRl diwgcG04NjB4KTsKKworCWZvciAoaSA9IDA7IGkgPCA0OyBpKyspIHsKKwkJcmVzID0gcGxhdGZv cm1fZ2V0X3Jlc291cmNlKHBkZXYsIElPUkVTT1VSQ0VfSVJRLCBpKTsKKwkJaWYgKCFyZXMpIHsK KwkJCWRldl9lcnIoJnBkZXYtPmRldiwgIkZhaWxlZCB0byBnZXQgSVJRIHJlc291cmNlc1xuIik7 CisJCQlnb3RvIG91dDsKKwkJfQorCQlwbTg2MHgtPmlycVtpXSA9IHJlcy0+c3RhcnQgKyBjaGlw LT5pcnFfYmFzZTsKKwkJc3RybmNweShwbTg2MHgtPm5hbWVbaV0sIHJlcy0+bmFtZSwgTUFYX05B TUVfTEVOKTsKKwl9CisKKwlyZXQgPSBzbmRfc29jX3JlZ2lzdGVyX2NvZGVjKCZwZGV2LT5kZXYs ICZzb2NfY29kZWNfZGV2X3BtODYweCwKKwkJCQkgICAgIHBtODYweF9kYWksIEFSUkFZX1NJWkUo cG04NjB4X2RhaSkpOworCWlmIChyZXQpIHsKKwkJZGV2X2VycigmcGRldi0+ZGV2LCAiRmFpbGVk IHRvIHJlZ2lzdGVyIGNvZGVjXG4iKTsKKwkJZ290byBvdXQ7CisJfQorCXJldHVybiByZXQ7CisK K291dDoKKwlwbGF0Zm9ybV9zZXRfZHJ2ZGF0YShwZGV2LCBOVUxMKTsKKwlrZnJlZShwbTg2MHgp OworCXJldHVybiAtRUlOVkFMOworfQorCitzdGF0aWMgaW50IF9fZGV2ZXhpdCBwbTg2MHhfY29k ZWNfcmVtb3ZlKHN0cnVjdCBwbGF0Zm9ybV9kZXZpY2UgKnBkZXYpCit7CisJc3RydWN0IHBtODYw eF9wcml2ICpwbTg2MHggPSBwbGF0Zm9ybV9nZXRfZHJ2ZGF0YShwZGV2KTsKKworCXNuZF9zb2Nf dW5yZWdpc3Rlcl9jb2RlYygmcGRldi0+ZGV2KTsKKwlwbGF0Zm9ybV9zZXRfZHJ2ZGF0YShwZGV2 LCBOVUxMKTsKKwlrZnJlZShwbTg2MHgpOworCXJldHVybiAwOworfQorCitzdGF0aWMgc3RydWN0 IHBsYXRmb3JtX2RyaXZlciBwbTg2MHhfY29kZWNfZHJpdmVyID0geworCS5kcml2ZXIJPSB7CisJ CS5uYW1lCT0gIjg4cG04NjB4LWNvZGVjIiwKKwkJLm93bmVyCT0gVEhJU19NT0RVTEUsCisJfSwK KwkucHJvYmUJPSBwbTg2MHhfY29kZWNfcHJvYmUsCisJLnJlbW92ZQk9IF9fZGV2ZXhpdF9wKHBt ODYweF9jb2RlY19yZW1vdmUpLAorfTsKKworc3RhdGljIF9faW5pdCBpbnQgcG04NjB4X2luaXQo dm9pZCkKK3sKKwlyZXR1cm4gcGxhdGZvcm1fZHJpdmVyX3JlZ2lzdGVyKCZwbTg2MHhfY29kZWNf ZHJpdmVyKTsKK30KK21vZHVsZV9pbml0KHBtODYweF9pbml0KTsKKworc3RhdGljIF9fZXhpdCB2 b2lkIHBtODYweF9leGl0KHZvaWQpCit7CisJcGxhdGZvcm1fZHJpdmVyX3VucmVnaXN0ZXIoJnBt ODYweF9jb2RlY19kcml2ZXIpOworfQorbW9kdWxlX2V4aXQocG04NjB4X2V4aXQpOworCitNT0RV TEVfREVTQ1JJUFRJT04oIkFTb0MgODhQTTg2MHggZHJpdmVyIik7CitNT0RVTEVfQVVUSE9SKCJI YW9qaWFuIFpodWFuZyA8aGFvamlhbi56aHVhbmdAbWFydmVsbC5jb20+Iik7CitNT0RVTEVfTElD RU5TRSgiR1BMIik7CitNT0RVTEVfQUxJQVMoInBsYXRmb3JtOjg4cG04NjB4LWNvZGVjIik7CisK ZGlmZiAtLWdpdCBhL3NvdW5kL3NvYy9jb2RlY3MvODhwbTg2MHgtY29kZWMuaCBiL3NvdW5kL3Nv Yy9jb2RlY3MvODhwbTg2MHgtY29kZWMuaApuZXcgZmlsZSBtb2RlIDEwMDY0NAppbmRleCAwMDAw MDAwLi5iMDM0ZGUyCi0tLSAvZGV2L251bGwKKysrIGIvc291bmQvc29jL2NvZGVjcy84OHBtODYw eC1jb2RlYy5oCkBAIC0wLDAgKzEsOTIgQEAKKy8qCisgKiA4OHBtODYweC1jb2RlYy5oIC0tIDg4 UE04NjB4IEFMU0EgU29DIEF1ZGlvIERyaXZlcgorICoKKyAqIENvcHlyaWdodCAyMDEwIE1hcnZl bGwgSW50ZXJuYXRpb25hbCBMdGQuCisgKglIYW9qaWFuIFpodWFuZyA8aGFvamlhbi56aHVhbmdA bWFydmVsbC5jb20+CisgKgorICogVGhpcyBwcm9ncmFtIGlzIGZyZWUgc29mdHdhcmU7IHlvdSBj YW4gcmVkaXN0cmlidXRlIGl0IGFuZC9vciBtb2RpZnkKKyAqIGl0IHVuZGVyIHRoZSB0ZXJtcyBv ZiB0aGUgR05VIEdlbmVyYWwgUHVibGljIExpY2Vuc2UgdmVyc2lvbiAyIGFzCisgKiBwdWJsaXNo ZWQgYnkgdGhlIEZyZWUgU29mdHdhcmUgRm91bmRhdGlvbi4KKyAqLworCisjaWZuZGVmIF9fODhQ TTg2MFhfSAorI2RlZmluZSBfXzg4UE04NjBYX0gKKworLyogVGhlIG9mZnNldCBvZiB0aGVzZSBy ZWdpc3RlcnMgYXJlIDB4YjAgKi8KKyNkZWZpbmUgUE04NjBYX1BDTV9JRkFDRV8xCQkweDAwCisj ZGVmaW5lIFBNODYwWF9QQ01fSUZBQ0VfMgkJMHgwMQorI2RlZmluZSBQTTg2MFhfUENNX0lGQUNF XzMJCTB4MDIKKyNkZWZpbmUgUE04NjBYX1BDTV9SQVRFCQkJMHgwMworI2RlZmluZSBQTTg2MFhf RUNfUEFUSAkJCTB4MDQKKyNkZWZpbmUgUE04NjBYX1NJREVUT05FX0xfR0FJTgkJMHgwNQorI2Rl ZmluZSBQTTg2MFhfU0lERVRPTkVfUl9HQUlOCQkweDA2CisjZGVmaW5lIFBNODYwWF9TSURFVE9O RV9TSElGVAkJMHgwNworI2RlZmluZSBQTTg2MFhfQURDX09GRlNFVF8xCQkweDA4CisjZGVmaW5l IFBNODYwWF9BRENfT0ZGU0VUXzIJCTB4MDkKKyNkZWZpbmUgUE04NjBYX0RNSUNfREVMQVkJCTB4 MGEKKworI2RlZmluZSBQTTg2MFhfSTJTX0lGQUNFXzEJCTB4MGIKKyNkZWZpbmUgUE04NjBYX0ky U19JRkFDRV8yCQkweDBjCisjZGVmaW5lIFBNODYwWF9JMlNfSUZBQ0VfMwkJMHgwZAorI2RlZmlu ZSBQTTg2MFhfSTJTX0lGQUNFXzQJCTB4MGUKKyNkZWZpbmUgUE04NjBYX0VRVUFMSVpFUl9OMF8x CQkweDBmCisjZGVmaW5lIFBNODYwWF9FUVVBTElaRVJfTjBfMgkJMHgxMAorI2RlZmluZSBQTTg2 MFhfRVFVQUxJWkVSX04xXzEJCTB4MTEKKyNkZWZpbmUgUE04NjBYX0VRVUFMSVpFUl9OMV8yCQkw eDEyCisjZGVmaW5lIFBNODYwWF9FUVVBTElaRVJfRDFfMQkJMHgxMworI2RlZmluZSBQTTg2MFhf RVFVQUxJWkVSX0QxXzIJCTB4MTQKKyNkZWZpbmUgUE04NjBYX0xPRklfR0FJTl9MRUZUCQkweDE1 CisjZGVmaW5lIFBNODYwWF9MT0ZJX0dBSU5fUklHSFQJCTB4MTYKKyNkZWZpbmUgUE04NjBYX0hJ RklMX0dBSU5fTEVGVAkJMHgxNworI2RlZmluZSBQTTg2MFhfSElGSUxfR0FJTl9SSUdIVAkJMHgx OAorI2RlZmluZSBQTTg2MFhfSElGSVJfR0FJTl9MRUZUCQkweDE5CisjZGVmaW5lIFBNODYwWF9I SUZJUl9HQUlOX1JJR0hUCQkweDFhCisjZGVmaW5lIFBNODYwWF9EQUNfT0ZGU0VUCQkweDFiCisj ZGVmaW5lIFBNODYwWF9PRkZTRVRfTEVGVF8xCQkweDFjCisjZGVmaW5lIFBNODYwWF9PRkZTRVRf TEVGVF8yCQkweDFkCisjZGVmaW5lIFBNODYwWF9PRkZTRVRfUklHSFRfMQkJMHgxZQorI2RlZmlu ZSBQTTg2MFhfT0ZGU0VUX1JJR0hUXzIJCTB4MWYKKyNkZWZpbmUgUE04NjBYX0FEQ19BTkFfMQkJ MHgyMAorI2RlZmluZSBQTTg2MFhfQURDX0FOQV8yCQkweDIxCisjZGVmaW5lIFBNODYwWF9BRENf QU5BXzMJCTB4MjIKKyNkZWZpbmUgUE04NjBYX0FEQ19BTkFfNAkJMHgyMworI2RlZmluZSBQTTg2 MFhfQU5BX1RPX0FOQQkJMHgyNAorI2RlZmluZSBQTTg2MFhfSFMxX0NUUkwJCQkweDI1CisjZGVm aW5lIFBNODYwWF9IUzJfQ1RSTAkJCTB4MjYKKyNkZWZpbmUgUE04NjBYX0xPMV9DVFJMCQkJMHgy NworI2RlZmluZSBQTTg2MFhfTE8yX0NUUkwJCQkweDI4CisjZGVmaW5lIFBNODYwWF9FQVJfQ1RS TF8xCQkweDI5CisjZGVmaW5lIFBNODYwWF9FQVJfQ1RSTF8yCQkweDJhCisjZGVmaW5lIFBNODYw WF9BVURJT19TVVBQTElFU18xCQkweDJiCisjZGVmaW5lIFBNODYwWF9BVURJT19TVVBQTElFU18y CQkweDJjCisjZGVmaW5lIFBNODYwWF9BRENfRU5fMQkJCTB4MmQKKyNkZWZpbmUgUE04NjBYX0FE Q19FTl8yCQkJMHgyZQorI2RlZmluZSBQTTg2MFhfREFDX0VOXzEJCQkweDJmCisjZGVmaW5lIFBN ODYwWF9EQUNfRU5fMgkJCTB4MzEKKyNkZWZpbmUgUE04NjBYX0FVRElPX0NBTF8xCQkweDMyCisj ZGVmaW5lIFBNODYwWF9BVURJT19DQUxfMgkJMHgzMworI2RlZmluZSBQTTg2MFhfQVVESU9fQ0FM XzMJCTB4MzQKKyNkZWZpbmUgUE04NjBYX0FVRElPX0NBTF80CQkweDM1CisjZGVmaW5lIFBNODYw WF9BVURJT19DQUxfNQkJMHgzNgorI2RlZmluZSBQTTg2MFhfQU5BX0lOUFVUX1NFTF8xCQkweDM3 CisjZGVmaW5lIFBNODYwWF9BTkFfSU5QVVRfU0VMXzIJCTB4MzgKKworI2RlZmluZSBQTTg2MFhf UENNX0lGQUNFXzQJCTB4MzkKKyNkZWZpbmUgUE04NjBYX0kyU19JRkFDRV81CQkweDNhCisKKyNk ZWZpbmUgUE04NjBYX1NIT1JUUwkJCTB4M2IKKyNkZWZpbmUgUE04NjBYX1BMTF9BREpfMQkJMHgz YworI2RlZmluZSBQTTg2MFhfUExMX0FESl8yCQkweDNkCisKKy8qIGJpdHMgZGVmaW5pdGlvbiAq LworI2RlZmluZSBQTTg2MFhfQ0xLX0RJUl9JTgkJMAorI2RlZmluZSBQTTg2MFhfQ0xLX0RJUl9P VVQJCTEKKworI2RlZmluZSBQTTg2MFhfREVUX0hFQURTRVQJCSgxIDw8IDApCisjZGVmaW5lIFBN ODYwWF9ERVRfTUlDCQkJKDEgPDwgMSkKKyNkZWZpbmUgUE04NjBYX0RFVF9IT09LCQkJKDEgPDwg MikKKyNkZWZpbmUgUE04NjBYX1NIT1JUX0hFQURTRVQJCSgxIDw8IDMpCisjZGVmaW5lIFBNODYw WF9TSE9SVF9MSU5FT1VUCQkoMSA8PCA0KQorI2RlZmluZSBQTTg2MFhfREVUX01BU0sJCQkweDFG CisKKyNlbmRpZgkvKiBfXzg4UE04NjBYX0ggKi8KZGlmZiAtLWdpdCBhL3NvdW5kL3NvYy9jb2Rl Y3MvS2NvbmZpZyBiL3NvdW5kL3NvYy9jb2RlY3MvS2NvbmZpZwppbmRleCBiZmRkOTJiLi5hM2Nm YzE4IDEwMDY0NAotLS0gYS9zb3VuZC9zb2MvY29kZWNzL0tjb25maWcKKysrIGIvc291bmQvc29j L2NvZGVjcy9LY29uZmlnCkBAIC0xMCw2ICsxMCw3IEBAIGNvbmZpZyBTTkRfU09DX0kyQ19BTkRf U1BJCiAKIGNvbmZpZyBTTkRfU09DX0FMTF9DT0RFQ1MKIAl0cmlzdGF0ZSAiQnVpbGQgYWxsIEFT b0MgQ09ERUMgZHJpdmVycyIKKwlzZWxlY3QgU05EX1NPQ184OFBNODYwWCBpZiBNRkRfODhQTTg2 MFgKIAlzZWxlY3QgU05EX1NPQ19MMwogCXNlbGVjdCBTTkRfU09DX0FDOTdfQ09ERUMgaWYgU05E X1NPQ19BQzk3X0JVUwogCXNlbGVjdCBTTkRfU09DX0FEMTgzNiBpZiBTUElfTUFTVEVSCkBAIC04 NSw2ICs4Niw5IEBAIGNvbmZpZyBTTkRfU09DX0FMTF9DT0RFQ1MKIAogICAgICAgICAgIElmIHVu c3VyZSBzZWxlY3QgIk4iLgogCitjb25maWcgU05EX1NPQ184OFBNODYwWAorCXRyaXN0YXRlCisK IGNvbmZpZyBTTkRfU09DX1dNX0hVQlMKIAl0cmlzdGF0ZQogCWRlZmF1bHQgeSBpZiBTTkRfU09D X1dNODk5Mz15IHx8IFNORF9TT0NfV004OTk0PXkKZGlmZiAtLWdpdCBhL3NvdW5kL3NvYy9jb2Rl Y3MvTWFrZWZpbGUgYi9zb3VuZC9zb2MvY29kZWNzL01ha2VmaWxlCmluZGV4IDljM2MzOWYuLmI5 YzQzNTggMTAwNjQ0Ci0tLSBhL3NvdW5kL3NvYy9jb2RlY3MvTWFrZWZpbGUKKysrIGIvc291bmQv c29jL2NvZGVjcy9NYWtlZmlsZQpAQCAtMSwzICsxLDQgQEAKK3NuZC1zb2MtODhwbTg2MHgtb2Jq cyA6PSA4OHBtODYweC1jb2RlYy5vCiBzbmQtc29jLWFjOTctb2JqcyA6PSBhYzk3Lm8KIHNuZC1z b2MtYWQxODM2LW9ianMgOj0gYWQxODM2Lm8KIHNuZC1zb2MtYWQxOTN4LW9ianMgOj0gYWQxOTN4 Lm8KQEAgLTY3LDYgKzY4LDcgQEAgc25kLXNvYy10cGE2MTMwYTItb2JqcyA6PSB0cGE2MTMwYTIu bwogc25kLXNvYy13bTIwMDAtb2JqcyA6PSB3bTIwMDAubwogc25kLXNvYy13bTkwOTAtb2JqcyA6 PSB3bTkwOTAubwogCitvYmotJChDT05GSUdfU05EX1NPQ184OFBNODYwWCkJKz0gc25kLXNvYy04 OHBtODYweC5vCiBvYmotJChDT05GSUdfU05EX1NPQ19BQzk3X0NPREVDKQkrPSBzbmQtc29jLWFj OTcubwogb2JqLSQoQ09ORklHX1NORF9TT0NfQUQxODM2KQkrPSBzbmQtc29jLWFkMTgzNi5vCiBv YmotJChDT05GSUdfU05EX1NPQ19BRDE5M1gpCSs9IHNuZC1zb2MtYWQxOTN4Lm8KLS0gCjEuNS42 LjUKCg== --0016e6d63f44021a1f048e002b69--

1 0

[PATCH 1/5] mfd: add codec resource into 88pm860x driver
by Haojian Zhuang 12 Aug '10

12 Aug '10

Add codec IRQ resources that are used in 88pm860x codec driver. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- drivers/mfd/88pm860x-core.c | 44 +++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 44 insertions(+), 0 deletions(-) diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 1580f1f..fba00b4 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -158,6 +158,43 @@ static struct mfd_cell onkey_devs[] = { }, }; +static struct resource codec_resources[] = { + { + /* Headset microphone insertion or removal */ + .name = "micin", + .start = PM8607_IRQ_MICIN, + .end = PM8607_IRQ_MICIN, + .flags = IORESOURCE_IRQ, + }, { + /* Hook-switch press or release */ + .name = "hook", + .start = PM8607_IRQ_HOOK, + .end = PM8607_IRQ_HOOK, + .flags = IORESOURCE_IRQ, + }, { + /* Headset insertion or removal */ + .name = "headset", + .start = PM8607_IRQ_HEADSET, + .end = PM8607_IRQ_HEADSET, + .flags = IORESOURCE_IRQ, + }, { + /* Audio short */ + .name = "audio-short", + .start = PM8607_IRQ_AUDIO_SHORT, + .end = PM8607_IRQ_AUDIO_SHORT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell codec_devs[] = { + { + .name = "88pm860x-codec", + .num_resources = 4, + .resources = &codec_resources[0], + .id = -1, + }, +}; + static struct resource regulator_resources[] = { PM8607_REG_RESOURCE(BUCK1, BUCK1), PM8607_REG_RESOURCE(BUCK2, BUCK2), @@ -695,6 +732,13 @@ static void __devinit device_8607_init(struct pm860x_chip *chip, goto out_dev; } + ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], + ARRAY_SIZE(codec_devs), + &codec_resources[0], 0); + if (ret < 0) { + dev_err(chip->dev, "Failed to add codec subdev\n"); + goto out_dev; + } return; out_dev: mfd_remove_devices(chip->dev); -- 1.5.6.5

1 0

[PATCH 1/1] mfd: add codec resource into 88pm860x driver
by Haojian Zhuang 12 Aug '10

12 Aug '10

Add codec IRQ resources that are used in 88pm860x codec driver. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- drivers/mfd/88pm860x-core.c | 44 +++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 44 insertions(+), 0 deletions(-) diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 07933f3..4db10a1 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -158,6 +158,43 @@ static struct mfd_cell onkey_devs[] = { }, }; +static struct resource codec_resources[] = { + { + /* Headset microphone insertion or removal */ + .name = "micin", + .start = PM8607_IRQ_MICIN, + .end = PM8607_IRQ_MICIN, + .flags = IORESOURCE_IRQ, + }, { + /* Hook-switch press or release */ + .name = "hook", + .start = PM8607_IRQ_HOOK, + .end = PM8607_IRQ_HOOK, + .flags = IORESOURCE_IRQ, + }, { + /* Headset insertion or removal */ + .name = "headset", + .start = PM8607_IRQ_HEADSET, + .end = PM8607_IRQ_HEADSET, + .flags = IORESOURCE_IRQ, + }, { + /* Audio short */ + .name = "audio-short", + .start = PM8607_IRQ_AUDIO_SHORT, + .end = PM8607_IRQ_AUDIO_SHORT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell codec_devs[] = { + { + .name = "88pm860x-codec", + .num_resources = ARRAY_SIZE(codec_resources), + .resources = &codec_resources[0], + .id = -1, + }, +}; + static struct resource regulator_resources[] = { PM8607_REG_RESOURCE(BUCK1, BUCK1), PM8607_REG_RESOURCE(BUCK2, BUCK2), @@ -687,6 +724,13 @@ static void __devinit device_8607_init(struct pm860x_chip *chip, goto out_dev; } + ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], + ARRAY_SIZE(codec_devs), + &codec_resources[0], 0); + if (ret < 0) { + dev_err(chip->dev, "Failed to add codec subdev\n"); + goto out_dev; + } return; out_dev: mfd_remove_devices(chip->dev); -- 1.5.6.5 --0016e6daaffbfa18ad048e7b0ed9 Content-Type: text/x-patch; charset=US-ASCII; name="0001-mfd-add-codec-resource-into-88pm860x-driver.patch" Content-Disposition: attachment; filename="0001-mfd-add-codec-resource-into-88pm860x-driver.patch" Content-Transfer-Encoding: base64 X-Attachment-Id: f_gd76bllc0 RnJvbSAyOGVkNGFmMzkyOTEyMGI5YjM4NTNmZmNiODA1NWViNmE4MWQzMWQ4IE1vbiBTZXAgMTcg MDA6MDA6MDAgMjAwMQpGcm9tOiBIYW9qaWFuIFpodWFuZyA8aGFvamlhbi56aHVhbmdAbWFydmVs bC5jb20+CkRhdGU6IFRodSwgMTIgQXVnIDIwMTAgMTE6NTk6MzMgKzA4MDAKU3ViamVjdDogW1BB VENIIDEvMV0gbWZkOiBhZGQgY29kZWMgcmVzb3VyY2UgaW50byA4OHBtODYweCBkcml2ZXIKCkFk ZCBjb2RlYyBJUlEgcmVzb3VyY2VzIHRoYXQgYXJlIHVzZWQgaW4gODhwbTg2MHggY29kZWMgZHJp dmVyLgoKU2lnbmVkLW9mZi1ieTogSGFvamlhbiBaaHVhbmcgPGhhb2ppYW4uemh1YW5nQG1hcnZl bGwuY29tPgotLS0KIGRyaXZlcnMvbWZkLzg4cG04NjB4LWNvcmUuYyB8ICAgNDQgKysrKysrKysr KysrKysrKysrKysrKysrKysrKysrKysrKysrKysrKysrKwogMSBmaWxlcyBjaGFuZ2VkLCA0NCBp bnNlcnRpb25zKCspLCAwIGRlbGV0aW9ucygtKQoKZGlmZiAtLWdpdCBhL2RyaXZlcnMvbWZkLzg4 cG04NjB4LWNvcmUuYyBiL2RyaXZlcnMvbWZkLzg4cG04NjB4LWNvcmUuYwppbmRleCAwNzkzM2Yz Li40ZGIxMGExIDEwMDY0NAotLS0gYS9kcml2ZXJzL21mZC84OHBtODYweC1jb3JlLmMKKysrIGIv ZHJpdmVycy9tZmQvODhwbTg2MHgtY29yZS5jCkBAIC0xNTgsNiArMTU4LDQzIEBAIHN0YXRpYyBz dHJ1Y3QgbWZkX2NlbGwgb25rZXlfZGV2c1tdID0gewogCX0sCiB9OwogCitzdGF0aWMgc3RydWN0 IHJlc291cmNlIGNvZGVjX3Jlc291cmNlc1tdID0geworCXsKKwkJLyogSGVhZHNldCBtaWNyb3Bo b25lIGluc2VydGlvbiBvciByZW1vdmFsICovCisJCS5uYW1lCQk9ICJtaWNpbiIsCisJCS5zdGFy dAkJPSBQTTg2MDdfSVJRX01JQ0lOLAorCQkuZW5kCQk9IFBNODYwN19JUlFfTUlDSU4sCisJCS5m bGFncwkJPSBJT1JFU09VUkNFX0lSUSwKKwl9LCB7CisJCS8qIEhvb2stc3dpdGNoIHByZXNzIG9y IHJlbGVhc2UgKi8KKwkJLm5hbWUJCT0gImhvb2siLAorCQkuc3RhcnQJCT0gUE04NjA3X0lSUV9I T09LLAorCQkuZW5kCQk9IFBNODYwN19JUlFfSE9PSywKKwkJLmZsYWdzCQk9IElPUkVTT1VSQ0Vf SVJRLAorCX0sIHsKKwkJLyogSGVhZHNldCBpbnNlcnRpb24gb3IgcmVtb3ZhbCAqLworCQkubmFt ZQkJPSAiaGVhZHNldCIsCisJCS5zdGFydAkJPSBQTTg2MDdfSVJRX0hFQURTRVQsCisJCS5lbmQJ CT0gUE04NjA3X0lSUV9IRUFEU0VULAorCQkuZmxhZ3MJCT0gSU9SRVNPVVJDRV9JUlEsCisJfSwg eworCQkvKiBBdWRpbyBzaG9ydCAqLworCQkubmFtZQkJPSAiYXVkaW8tc2hvcnQiLAorCQkuc3Rh cnQJCT0gUE04NjA3X0lSUV9BVURJT19TSE9SVCwKKwkJLmVuZAkJPSBQTTg2MDdfSVJRX0FVRElP X1NIT1JULAorCQkuZmxhZ3MJCT0gSU9SRVNPVVJDRV9JUlEsCisJfSwKK307CisKK3N0YXRpYyBz dHJ1Y3QgbWZkX2NlbGwgY29kZWNfZGV2c1tdID0geworCXsKKwkJLm5hbWUJCT0gIjg4cG04NjB4 LWNvZGVjIiwKKwkJLm51bV9yZXNvdXJjZXMJPSBBUlJBWV9TSVpFKGNvZGVjX3Jlc291cmNlcyks CisJCS5yZXNvdXJjZXMJPSAmY29kZWNfcmVzb3VyY2VzWzBdLAorCQkuaWQJCT0gLTEsCisJfSwK K307CisKIHN0YXRpYyBzdHJ1Y3QgcmVzb3VyY2UgcmVndWxhdG9yX3Jlc291cmNlc1tdID0gewog CVBNODYwN19SRUdfUkVTT1VSQ0UoQlVDSzEsIEJVQ0sxKSwKIAlQTTg2MDdfUkVHX1JFU09VUkNF KEJVQ0syLCBCVUNLMiksCkBAIC02ODcsNiArNzI0LDEzIEBAIHN0YXRpYyB2b2lkIF9fZGV2aW5p dCBkZXZpY2VfODYwN19pbml0KHN0cnVjdCBwbTg2MHhfY2hpcCAqY2hpcCwKIAkJZ290byBvdXRf ZGV2OwogCX0KIAorCXJldCA9IG1mZF9hZGRfZGV2aWNlcyhjaGlwLT5kZXYsIDAsICZjb2RlY19k ZXZzWzBdLAorCQkJICAgICAgQVJSQVlfU0laRShjb2RlY19kZXZzKSwKKwkJCSAgICAgICZjb2Rl Y19yZXNvdXJjZXNbMF0sIDApOworCWlmIChyZXQgPCAwKSB7CisJCWRldl9lcnIoY2hpcC0+ZGV2 LCAiRmFpbGVkIHRvIGFkZCBjb2RlYyBzdWJkZXZcbiIpOworCQlnb3RvIG91dF9kZXY7CisJfQog CXJldHVybjsKIG91dF9kZXY6CiAJbWZkX3JlbW92ZV9kZXZpY2VzKGNoaXAtPmRldik7Ci0tIAox LjUuNi41Cgo= --0016e6daaffbfa18ad048e7b0ed9--

1 0

[PATCH 3/5] ASoC: update setting for pxa ssp slave mode
by Haojian Zhuang 12 Aug '10

12 Aug '10

SCFR bit is required to be always set if pxa ssp is in slave mode. This bit indicates clock input to SSPSCLK is only active during data transfers. Signed-off-by: Haojian Zhuang <haojian.zhuang(a)marvell.com> --- sound/soc/pxa/pxa-ssp.c | 23 +++++++++++++++-------- 1 files changed, 15 insertions(+), 8 deletions(-) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index c4f480d..8dfbcda 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -462,9 +462,7 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, { struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); struct ssp_device *ssp = priv->ssp; - u32 sscr0; - u32 sscr1; - u32 sspsp; + u32 sscr0, sscr1, sspsp, scfr; /* check if we need to change anything at all */ if (priv->dai_fmt == fmt) @@ -479,16 +477,16 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, /* reset port settings */ sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & - (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); + ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7); sspsp = 0; switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: - sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR; + sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR; break; case SND_SOC_DAIFMT_CBM_CFS: - sscr1 |= SSCR1_SCLKDIR; + sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR; break; case SND_SOC_DAIFMT_CBS_CFS: break; @@ -534,6 +532,17 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, pxa_ssp_write_reg(ssp, SSCR1, sscr1); pxa_ssp_write_reg(ssp, SSPSP, sspsp); + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR; + pxa_ssp_write_reg(ssp, SSCR1, scfr); + + while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY) + cpu_relax(); + break; + } + dump_registers(ssp); /* Since we are configuring the timings for the format by hand @@ -583,10 +592,8 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, /* clear selected SSP bits */ sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); - pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* bit size */ - sscr0 = pxa_ssp_read_reg(ssp, SSCR0); switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: #ifdef CONFIG_PXA3xx -- 1.5.6.5

1 0

Re: [alsa-devel] [PATCH] sound: usb: USB3 Super Speed patch
by Clemens Ladisch 11 Aug '10

11 Aug '10

Paul Zimmerman wrote: > This patch adds Super Speed support to the USB drivers under sound/. It adds > tests for USB_SPEED_SUPER to all the places that check for the USB speed. > +++ b/sound/usb/midi.c > @@ -834,7 +834,8 @@ static void snd_usbmidi_us122l_output(struct snd_usb_midi_out_endpoint *ep, > +++ b/sound/usb/misc/ua101.c > +++ b/sound/usb/usx2y/us122l.c > +++ b/sound/usb/usx2y/usb_stream.c These devices do not support super speed. > +++ b/sound/usb/pcm.c > - if (snd_usb_get_speed(subs->dev) != USB_SPEED_HIGH) > + if (snd_usb_get_speed(subs->dev) != USB_SPEED_HIGH && > + snd_usb_get_speed(subs->dev) != USB_SPEED_SUPER) > /* full speed devices have fixed data packet interval */ > ptmin = 1000; In places like this, it would be better to write something like if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) or if (snd_usb_get_speed(subs->dev) < USB_SPEED_HIGH) Regards, Clemens

4 5

[alsa-devel] ASoC: multi-component - two cleanup patches
by Sascha Hauer 11 Aug '10

11 Aug '10

Hi, Two small patches you might consider adding to the multi-component rework. Sascha

2 3

[alsa-devel] i.MX SDMA support
by Sascha Hauer 11 Aug '10

11 Aug '10

Hi, I just posted a series adding SDMA support for i.MX to the Arm Linux Kernel mailing list. It also contains a patch for adding SDMA support to the i.MX SSI units. I haven't cc'd alsa-devel because most of the stuff is not sound related. I know at least Mark and Liam are interested, so I leave a pointer here. The sound stuff needs to be synchronized with the other patches, so it's probably best if all patches go via my tree. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

3 13

[alsa-devel] About the platform_name field in snd_soc_dai_link
by Sascha Hauer 11 Aug '10

11 Aug '10

Hi, I'm wondering what exactly a snd_soc_platform is. Apparently the snd_pcm_ops/pcm_new/pcm_free are specific to a platform. For my understanding these operations are more specific to a cpu_dai. Looking at the tree it seems that each cpu_dai has exactly one possible platform, which seems logical to me because the cpu_dai knows how to transfer the data. My problem on i.MX is that I currently have two possible cpu dais (imx-ssi.[01]) and each can be configured to use dma or fiq depending on the dma capabilities. So the cpu_dai knows which pcm_ops we have to use, but currently it's the soc glue code which has to decide in platform_name. Am I understanding something wrong here? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

3 6

[PATCH] ISA: New Aztech Sound Galaxy driver
by René Herman 11 Aug '10

11 Aug '10

This is a new driver for Aztech Sound Galaxy ISA soundcards based on the AZT1605 and AZT2316 chipsets. It's constructed as two seperate drivers for either chipset generated from the same source file, with (very) minimal ifdeffery. The drivers check the SB DSP version to decide if they are being loaded for the right chip. AZT1605 returns 2.1 by default and AZT2316 3.1. This isn't full-proof as the DSP version can actually be set through software but it's close enough -- as far as I've been able to see, the DSP version can not be stored in the EEPROM and the cards will therefore startup with the defaults. This distinction could (with the same success rate) also be used to decide which chip we're looking at at runtime meaning a single, merged driver is also an option but I feel it's actually nicer this way. A merged driver would have to postpone translating the passed in resource values to the card configuration until it knew which one it was looking at and would need to postpone erring out on mpu_irq=10 for azt1605 and mpu_irq=3 for azt2316. The drivers have been tested on various cards. For snd-azt1605: FCC-ID I38-MMSN811: Aztech Sound Galaxy Nova 16 Extra FCC-ID I38-MMSN822: Aztech Sound Galaxy Pro 16 II and for snd-azt2316: FCC-ID I38-MMSN824: Aztech Sound Galaxy Pro 16 AB FCC-ID I38-MMSN826: Trust Sound Expert DeLuxe Wave 32 (05201) FCC-ID I38-MMSN830: Trust Sound Expert DeLuxe 16+ (05202) FCC-ID I38-MMSN837: Packard Bell ISA Soundcard 030069 FCC-ID I38-MMSN846: Trust Sound Expert DeLuxe 16-3D (06300) FCC-ID I38-MMSN847: Trust Sound Expert DeLuxe Wave 32-3D (06301) FCC-ID I38-MMSN852: Aztech Sound Galaxy Waverider Pro 32-3D 826 and 846 were also marketed directly by Aztech and then known as: FCC-ID I38-MMSN826: Aztech Sound Galaxy Waverider 32+ FCC-ID I38-MMSN846: Aztech Sound Galaxy Nova 16 Extra II-3D All cards work fully -- full-duplex PCM, MIDI and FM. Full-duplex is a little flaky on some. I38-MSN811 tends to not work in full-duplex but sometimes does with the highest success rate being achieved when you first start the capture and then a playback instead of the other way around (it's a CS4231-KL codec). The cards with an AD1845XP codec (my I38-MMSN826 and one of my I38-MMSN830s) are also somewhat duplex-challenged. Sometimes full-duplex works, sometimes not and this varies from try to try. This seems likely to be a timing problem somewhere inside wss-lib. I38-MMSN826 has an additional "ICS2115 WaveFront" wavetable synth onboard that isn't supported yet. The wavetable synths on I38-MMSN847 and I38-MMSN852 are wired directly to the standard MPU-401 UART and the AUX1 input on the codec and work without problem. CD-ROM audio on the cards is routed to the codec "Line" input, Line-In to its Aux input, and FM/Wavetable to its AUX1 input. I did not rename the controls due to the capture source enumeration: I see that capture-source overrides are hardcoded in wss-lib and this is just too ugly to live. Versus the old snd-sgalaxy driver these drivers add support for the models without a configuration EEPROM (which are common), full-duplex, MPU-401 UART and OPL3. In the future they might grow support for that ICS2115 WaveFront synth on 826 and an hwdep interface to write to the EEPROM on the models that have one. Signed-off-by: Rene Herman <rene.herman(a)gmail.com> --- Documentation/sound/alsa/ALSA-Configuration.txt | 68 +++ sound/isa/Kconfig | 26 + sound/isa/Makefile | 2 +- sound/isa/galaxy/Makefile | 10 + sound/isa/galaxy/azt1605.c | 91 ++++ sound/isa/galaxy/azt2316.c | 111 ++++ sound/isa/galaxy/galaxy.c | 651 +++++++++++++++++++++++ 7 files changed, 958 insertions(+), 1 deletions(-) create mode 100644 sound/isa/galaxy/Makefile create mode 100644 sound/isa/galaxy/azt1605.c create mode 100644 sound/isa/galaxy/azt2316.c create mode 100644 sound/isa/galaxy/galaxy.c diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 2075bbb..52f6725 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -300,6 +300,74 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. control correctly. If you have problems regarding this, try another ALSA compliant mixer (alsamixer works). + Module snd-azt1605 + ------------------ + + Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605 + chipset. + + port - port # for BASE (0x220,0x240,0x260,0x280) + wss_port - port # for WSS (0x530,0x604,0xe80,0xf40) + irq - IRQ # for WSS (7,9,10,11) + dma1 - DMA # for WSS playback (0,1,3) + dma2 - DMA # for WSS capture (0,1), -1 = disabled (default) + mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default) + mpu_irq - IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default) + fm_port - port # for OPL3 (0x388), -1 = disabled (default) + + This module supports multiple cards. It does not support autoprobe: port, + wss_port, irq and dma1 have to be specified. The other values are + optional. + + "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) + or the value stored in the card's EEPROM for cards that have an EEPROM and + their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can + be choosen freely from the options enumerated above. + + If dma2 is specified and different from dma1, the card will operate in + full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to + enable capture since only channels 0 and 1 are available for capture. + + Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0 + mpu_port=0x330 mpu_irq=9 fm_port=0x388". + + Whatever IRQ and DMA channels you pick, be sure to reserve them for + legacy ISA in your BIOS. + + Module snd-azt2316 + ------------------ + + Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316 + chipset. + + port - port # for BASE (0x220,0x240,0x260,0x280) + wss_port - port # for WSS (0x530,0x604,0xe80,0xf40) + irq - IRQ # for WSS (7,9,10,11) + dma1 - DMA # for WSS playback (0,1,3) + dma2 - DMA # for WSS capture (0,1), -1 = disabled (default) + mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default) + mpu_irq - IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default) + fm_port - port # for OPL3 (0x388), -1 = disabled (default) + + This module supports multiple cards. It does not support autoprobe: port, + wss_port, irq and dma1 have to be specified. The other values are + optional. + + "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) + or the value stored in the card's EEPROM for cards that have an EEPROM and + their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can + be choosen freely from the options enumerated above. + + If dma2 is specified and different from dma1, the card will operate in + full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to + enable capture since only channels 0 and 1 are available for capture. + + Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0 + mpu_port=0x330 mpu_irq=9 fm_port=0x388". + + Whatever IRQ and DMA channels you pick, be sure to reserve them for + legacy ISA in your BIOS. + Module snd-aw2 -------------- diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index c6990c6..f9aa13d 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -77,6 +77,32 @@ config SND_ALS100 To compile this driver as a module, choose M here: the module will be called snd-als100. +config SND_AZT1605 + tristate "Aztech AZT1605 Driver" + depends on SND + select SND_WSS_LIB + select SND_MPU401_UART + select SND_OPL3_LIB + help + Say Y here to include support for Aztech Sound Galaxy cards + based on the AZT1605 chipset. + + To compile this driver as a module, choose M here: the module + will be called snd-azt1605. + +config SND_AZT2316 + tristate "Aztech AZT2316 Driver" + depends on SND + select SND_WSS_LIB + select SND_MPU401_UART + select SND_OPL3_LIB + help + Say Y here to include support for Aztech Sound Galaxy cards + based on the AZT2316 chipset. + + To compile this driver as a module, choose M here: the module + will be called snd-azt2316. + config SND_AZT2320 tristate "Aztech Systems AZT2320" depends on PNP diff --git a/sound/isa/Makefile b/sound/isa/Makefile index c73d30c..d2bd8f5 100644 --- a/sound/isa/Makefile +++ b/sound/isa/Makefile @@ -24,5 +24,5 @@ obj-$(CONFIG_SND_SC6000) += snd-sc6000.o obj-$(CONFIG_SND_SGALAXY) += snd-sgalaxy.o obj-$(CONFIG_SND_SSCAPE) += snd-sscape.o -obj-$(CONFIG_SND) += ad1816a/ ad1848/ cs423x/ es1688/ gus/ msnd/ opti9xx/ \ +obj-$(CONFIG_SND) += ad1816a/ ad1848/ cs423x/ es1688/ galaxy/ gus/ msnd/ opti9xx/ \ sb/ wavefront/ wss/ diff --git a/sound/isa/galaxy/Makefile b/sound/isa/galaxy/Makefile new file mode 100644 index 0000000..e307066 --- /dev/null +++ b/sound/isa/galaxy/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for ALSA +# Copyright (c) 2001 by Jaroslav Kysela <perex(a)suse.cz> +# + +snd-azt1605-objs := azt1605.o +snd-azt2316-objs := azt2316.o + +obj-$(CONFIG_SND_AZT1605) += snd-azt1605.o +obj-$(CONFIG_SND_AZT2316) += snd-azt2316.o diff --git a/sound/isa/galaxy/azt1605.c b/sound/isa/galaxy/azt1605.c new file mode 100644 index 0000000..9a97643 --- /dev/null +++ b/sound/isa/galaxy/azt1605.c @@ -0,0 +1,91 @@ +/* + * Aztech AZT1605 Driver + * Copyright (C) 2007,2010 Rene Herman + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#define AZT1605 + +#define CRD_NAME "Aztech AZT1605" +#define DRV_NAME "AZT1605" +#define DEV_NAME "azt1605" + +#define GALAXY_DSP_MAJOR 2 +#define GALAXY_DSP_MINOR 1 + +#define GALAXY_CONFIG_SIZE 3 + +/* + * 24-bit config register + */ + +#define GALAXY_CONFIG_SBA_220 (0 << 0) +#define GALAXY_CONFIG_SBA_240 (1 << 0) +#define GALAXY_CONFIG_SBA_260 (2 << 0) +#define GALAXY_CONFIG_SBA_280 (3 << 0) +#define GALAXY_CONFIG_SBA_MASK GALAXY_CONFIG_SBA_280 + +#define GALAXY_CONFIG_MPUA_300 (0 << 2) +#define GALAXY_CONFIG_MPUA_330 (1 << 2) + +#define GALAXY_CONFIG_MPU_ENABLE (1 << 3) + +#define GALAXY_CONFIG_GAME_ENABLE (1 << 4) + +#define GALAXY_CONFIG_CD_PANASONIC (1 << 5) +#define GALAXY_CONFIG_CD_MITSUMI (1 << 6) +#define GALAXY_CONFIG_CD_MASK (\ + GALAXY_CONFIG_CD_PANASONIC | GALAXY_CONFIG_CD_MITSUMI) + +#define GALAXY_CONFIG_UNUSED (1 << 7) +#define GALAXY_CONFIG_UNUSED_MASK GALAXY_CONFIG_UNUSED + +#define GALAXY_CONFIG_SBIRQ_2 (1 << 8) +#define GALAXY_CONFIG_SBIRQ_3 (1 << 9) +#define GALAXY_CONFIG_SBIRQ_5 (1 << 10) +#define GALAXY_CONFIG_SBIRQ_7 (1 << 11) + +#define GALAXY_CONFIG_MPUIRQ_2 (1 << 12) +#define GALAXY_CONFIG_MPUIRQ_3 (1 << 13) +#define GALAXY_CONFIG_MPUIRQ_5 (1 << 14) +#define GALAXY_CONFIG_MPUIRQ_7 (1 << 15) + +#define GALAXY_CONFIG_WSSA_530 (0 << 16) +#define GALAXY_CONFIG_WSSA_604 (1 << 16) +#define GALAXY_CONFIG_WSSA_E80 (2 << 16) +#define GALAXY_CONFIG_WSSA_F40 (3 << 16) + +#define GALAXY_CONFIG_WSS_ENABLE (1 << 18) + +#define GALAXY_CONFIG_CDIRQ_11 (1 << 19) +#define GALAXY_CONFIG_CDIRQ_12 (1 << 20) +#define GALAXY_CONFIG_CDIRQ_15 (1 << 21) +#define GALAXY_CONFIG_CDIRQ_MASK (\ + GALAXY_CONFIG_CDIRQ_11 | GALAXY_CONFIG_CDIRQ_12 |\ + GALAXY_CONFIG_CDIRQ_15) + +#define GALAXY_CONFIG_CDDMA_DISABLE (0 << 22) +#define GALAXY_CONFIG_CDDMA_0 (1 << 22) +#define GALAXY_CONFIG_CDDMA_1 (2 << 22) +#define GALAXY_CONFIG_CDDMA_3 (3 << 22) +#define GALAXY_CONFIG_CDDMA_MASK GALAXY_CONFIG_CDDMA_3 + +#define GALAXY_CONFIG_MASK (\ + GALAXY_CONFIG_SBA_MASK | GALAXY_CONFIG_CD_MASK |\ + GALAXY_CONFIG_UNUSED_MASK | GALAXY_CONFIG_CDIRQ_MASK |\ + GALAXY_CONFIG_CDDMA_MASK) + +#include "galaxy.c" diff --git a/sound/isa/galaxy/azt2316.c b/sound/isa/galaxy/azt2316.c new file mode 100644 index 0000000..1894411 --- /dev/null +++ b/sound/isa/galaxy/azt2316.c @@ -0,0 +1,111 @@ +/* + * Aztech AZT2316 Driver + * Copyright (C) 2007,2010 Rene Herman + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#define AZT2316 + +#define CRD_NAME "Aztech AZT2316" +#define DRV_NAME "AZT2316" +#define DEV_NAME "azt2316" + +#define GALAXY_DSP_MAJOR 3 +#define GALAXY_DSP_MINOR 1 + +#define GALAXY_CONFIG_SIZE 4 + +/* + * 32-bit config register + */ + +#define GALAXY_CONFIG_SBA_220 (0 << 0) +#define GALAXY_CONFIG_SBA_240 (1 << 0) +#define GALAXY_CONFIG_SBA_260 (2 << 0) +#define GALAXY_CONFIG_SBA_280 (3 << 0) +#define GALAXY_CONFIG_SBA_MASK GALAXY_CONFIG_SBA_280 + +#define GALAXY_CONFIG_SBIRQ_2 (1 << 2) +#define GALAXY_CONFIG_SBIRQ_5 (1 << 3) +#define GALAXY_CONFIG_SBIRQ_7 (1 << 4) +#define GALAXY_CONFIG_SBIRQ_10 (1 << 5) + +#define GALAXY_CONFIG_SBDMA_DISABLE (0 << 6) +#define GALAXY_CONFIG_SBDMA_0 (1 << 6) +#define GALAXY_CONFIG_SBDMA_1 (2 << 6) +#define GALAXY_CONFIG_SBDMA_3 (3 << 6) + +#define GALAXY_CONFIG_WSSA_530 (0 << 8) +#define GALAXY_CONFIG_WSSA_604 (1 << 8) +#define GALAXY_CONFIG_WSSA_E80 (2 << 8) +#define GALAXY_CONFIG_WSSA_F40 (3 << 8) + +#define GALAXY_CONFIG_WSS_ENABLE (1 << 10) + +#define GALAXY_CONFIG_GAME_ENABLE (1 << 11) + +#define GALAXY_CONFIG_MPUA_300 (0 << 12) +#define GALAXY_CONFIG_MPUA_330 (1 << 12) + +#define GALAXY_CONFIG_MPU_ENABLE (1 << 13) + +#define GALAXY_CONFIG_CDA_310 (0 << 14) +#define GALAXY_CONFIG_CDA_320 (1 << 14) +#define GALAXY_CONFIG_CDA_340 (2 << 14) +#define GALAXY_CONFIG_CDA_350 (3 << 14) +#define GALAXY_CONFIG_CDA_MASK GALAXY_CONFIG_CDA_350 + +#define GALAXY_CONFIG_CD_DISABLE (0 << 16) +#define GALAXY_CONFIG_CD_PANASONIC (1 << 16) +#define GALAXY_CONFIG_CD_SONY (2 << 16) +#define GALAXY_CONFIG_CD_MITSUMI (3 << 16) +#define GALAXY_CONFIG_CD_AZTECH (4 << 16) +#define GALAXY_CONFIG_CD_UNUSED_5 (5 << 16) +#define GALAXY_CONFIG_CD_UNUSED_6 (6 << 16) +#define GALAXY_CONFIG_CD_UNUSED_7 (7 << 16) +#define GALAXY_CONFIG_CD_MASK GALAXY_CONFIG_CD_UNUSED_7 + +#define GALAXY_CONFIG_CDDMA8_DISABLE (0 << 20) +#define GALAXY_CONFIG_CDDMA8_0 (1 << 20) +#define GALAXY_CONFIG_CDDMA8_1 (2 << 20) +#define GALAXY_CONFIG_CDDMA8_3 (3 << 20) +#define GALAXY_CONFIG_CDDMA8_MASK GALAXY_CONFIG_CDDMA8_3 + +#define GALAXY_CONFIG_CDDMA16_DISABLE (0 << 22) +#define GALAXY_CONFIG_CDDMA16_5 (1 << 22) +#define GALAXY_CONFIG_CDDMA16_6 (2 << 22) +#define GALAXY_CONFIG_CDDMA16_7 (3 << 22) +#define GALAXY_CONFIG_CDDMA16_MASK GALAXY_CONFIG_CDDMA16_7 + +#define GALAXY_CONFIG_MPUIRQ_2 (1 << 24) +#define GALAXY_CONFIG_MPUIRQ_5 (1 << 25) +#define GALAXY_CONFIG_MPUIRQ_7 (1 << 26) +#define GALAXY_CONFIG_MPUIRQ_10 (1 << 27) + +#define GALAXY_CONFIG_CDIRQ_5 (1 << 28) +#define GALAXY_CONFIG_CDIRQ_11 (1 << 29) +#define GALAXY_CONFIG_CDIRQ_12 (1 << 30) +#define GALAXY_CONFIG_CDIRQ_15 (1 << 31) +#define GALAXY_CONFIG_CDIRQ_MASK (\ + GALAXY_CONFIG_CDIRQ_5 | GALAXY_CONFIG_CDIRQ_11 |\ + GALAXY_CONFIG_CDIRQ_12 | GALAXY_CONFIG_CDIRQ_15) + +#define GALAXY_CONFIG_MASK (\ + GALAXY_CONFIG_SBA_MASK | GALAXY_CONFIG_CDA_MASK |\ + GALAXY_CONFIG_CD_MASK | GALAXY_CONFIG_CDDMA16_MASK |\ + GALAXY_CONFIG_CDDMA8_MASK | GALAXY_CONFIG_CDIRQ_MASK) + +#include "galaxy.c" diff --git a/sound/isa/galaxy/galaxy.c b/sound/isa/galaxy/galaxy.c new file mode 100644 index 0000000..3dfd323 --- /dev/null +++ b/sound/isa/galaxy/galaxy.c @@ -0,0 +1,651 @@ +/* + * Aztech AZT1605/AZT2316 Driver + * Copyright (C) 2007,2010 Rene Herman + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/isa.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <sound/core.h> +#include <sound/initval.h> +#include <sound/wss.h> +#include <sound/mpu401.h> +#include <sound/opl3.h> + +MODULE_DESCRIPTION(CRD_NAME); +MODULE_AUTHOR("Rene Herman"); +MODULE_LICENSE("GPL"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard."); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); + +static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; +static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; +static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; +static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; + +module_param_array(port, long, NULL, 0444); +MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); +module_param_array(wss_port, long, NULL, 0444); +MODULE_PARM_DESC(wss_port, "WSS port # for " CRD_NAME " driver."); +module_param_array(mpu_port, long, NULL, 0444); +MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); +module_param_array(fm_port, long, NULL, 0444); +MODULE_PARM_DESC(fm_port, "FM port # for " CRD_NAME " driver."); +module_param_array(irq, int, NULL, 0444); +MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); +module_param_array(mpu_irq, int, NULL, 0444); +MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); +module_param_array(dma1, int, NULL, 0444); +MODULE_PARM_DESC(dma1, "Playback DMA # for " CRD_NAME " driver."); +module_param_array(dma2, int, NULL, 0444); +MODULE_PARM_DESC(dma2, "Capture DMA # for " CRD_NAME " driver."); + +/* + * Generic SB DSP support routines + */ + +#define DSP_PORT_RESET 0x6 +#define DSP_PORT_READ 0xa +#define DSP_PORT_COMMAND 0xc +#define DSP_PORT_STATUS 0xc +#define DSP_PORT_DATA_AVAIL 0xe + +#define DSP_SIGNATURE 0xaa + +#define DSP_COMMAND_GET_VERSION 0xe1 + +static int __devinit dsp_get_byte(void __iomem *port, u8 *val) +{ + int loops = 1000; + + while (!(ioread8(port + DSP_PORT_DATA_AVAIL) & 0x80)) { + if (!loops--) + return -EIO; + cpu_relax(); + } + *val = ioread8(port + DSP_PORT_READ); + return 0; +} + +static int __devinit dsp_reset(void __iomem *port) +{ + u8 val; + + iowrite8(1, port + DSP_PORT_RESET); + udelay(10); + iowrite8(0, port + DSP_PORT_RESET); + + if (dsp_get_byte(port, &val) < 0 || val != DSP_SIGNATURE) + return -ENODEV; + + return 0; +} + +static int __devinit dsp_command(void __iomem *port, u8 cmd) +{ + int loops = 1000; + + while (ioread8(port + DSP_PORT_STATUS) & 0x80) { + if (!loops--) + return -EIO; + cpu_relax(); + } + iowrite8(cmd, port + DSP_PORT_COMMAND); + return 0; +} + +static int __devinit dsp_get_version(void __iomem *port, u8 *major, u8 *minor) +{ + int err; + + err = dsp_command(port, DSP_COMMAND_GET_VERSION); + if (err < 0) + return err; + + err = dsp_get_byte(port, major); + if (err < 0) + return err; + + err = dsp_get_byte(port, minor); + if (err < 0) + return err; + + return 0; +} + +/* + * Generic WSS support routines + */ + +#define WSS_CONFIG_DMA_0 (1 << 0) +#define WSS_CONFIG_DMA_1 (2 << 0) +#define WSS_CONFIG_DMA_3 (3 << 0) +#define WSS_CONFIG_DUPLEX (1 << 2) +#define WSS_CONFIG_IRQ_7 (1 << 3) +#define WSS_CONFIG_IRQ_9 (2 << 3) +#define WSS_CONFIG_IRQ_10 (3 << 3) +#define WSS_CONFIG_IRQ_11 (4 << 3) + +#define WSS_PORT_CONFIG 0 +#define WSS_PORT_SIGNATURE 3 + +#define WSS_SIGNATURE 4 + +static int __devinit wss_detect(void __iomem *wss_port) +{ + if ((ioread8(wss_port + WSS_PORT_SIGNATURE) & 0x3f) != WSS_SIGNATURE) + return -ENODEV; + + return 0; +} + +static void wss_set_config(void __iomem *wss_port, u8 wss_config) +{ + iowrite8(wss_config, wss_port + WSS_PORT_CONFIG); +} + +/* + * Aztech Sound Galaxy specifics + */ + +#define GALAXY_PORT_CONFIG 1024 +#define CONFIG_PORT_SET 4 + +#define DSP_COMMAND_GALAXY_8 8 +#define GALAXY_COMMAND_GET_TYPE 5 + +#define DSP_COMMAND_GALAXY_9 9 +#define GALAXY_COMMAND_WSSMODE 0 +#define GALAXY_COMMAND_SB8MODE 1 + +#define GALAXY_MODE_WSS GALAXY_COMMAND_WSSMODE +#define GALAXY_MODE_SB8 GALAXY_COMMAND_SB8MODE + +struct snd_galaxy { + void __iomem *port; + void __iomem *config_port; + void __iomem *wss_port; + u32 config; + struct resource *res_port; + struct resource *res_config_port; + struct resource *res_wss_port; +}; + +static u32 config[SNDRV_CARDS]; +static u8 wss_config[SNDRV_CARDS]; + +static int __devinit snd_galaxy_match(struct device *dev, unsigned int n) +{ + if (!enable[n]) + return 0; + + switch (port[n]) { + case SNDRV_AUTO_PORT: + dev_err(dev, "please specify port\n"); + return 0; + case 0x220: + config[n] |= GALAXY_CONFIG_SBA_220; + break; + case 0x240: + config[n] |= GALAXY_CONFIG_SBA_240; + break; + case 0x260: + config[n] |= GALAXY_CONFIG_SBA_260; + break; + case 0x280: + config[n] |= GALAXY_CONFIG_SBA_280; + break; + default: + dev_err(dev, "invalid port %#lx\n", port[n]); + return 0; + } + + switch (wss_port[n]) { + case SNDRV_AUTO_PORT: + dev_err(dev, "please specify wss_port\n"); + return 0; + case 0x530: + config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_530; + break; + case 0x604: + config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_604; + break; + case 0xe80: + config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_E80; + break; + case 0xf40: + config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_F40; + break; + default: + dev_err(dev, "invalid WSS port %#lx\n", wss_port[n]); + return 0; + } + + switch (irq[n]) { + case SNDRV_AUTO_IRQ: + dev_err(dev, "please specify irq\n"); + return 0; + case 7: + wss_config[n] |= WSS_CONFIG_IRQ_7; + break; + case 2: + irq[n] = 9; + case 9: + wss_config[n] |= WSS_CONFIG_IRQ_9; + break; + case 10: + wss_config[n] |= WSS_CONFIG_IRQ_10; + break; + case 11: + wss_config[n] |= WSS_CONFIG_IRQ_11; + break; + default: + dev_err(dev, "invalid IRQ %d\n", irq[n]); + return 0; + } + + switch (dma1[n]) { + case SNDRV_AUTO_DMA: + dev_err(dev, "please specify dma1\n"); + return 0; + case 0: + wss_config[n] |= WSS_CONFIG_DMA_0; + break; + case 1: + wss_config[n] |= WSS_CONFIG_DMA_1; + break; + case 3: + wss_config[n] |= WSS_CONFIG_DMA_3; + break; + default: + dev_err(dev, "invalid playback DMA %d\n", dma1[n]); + return 0; + } + + if (dma2[n] == SNDRV_AUTO_DMA || dma2[n] == dma1[n]) { + dma2[n] = -1; + goto mpu; + } + + wss_config[n] |= WSS_CONFIG_DUPLEX; + switch (dma2[n]) { + case 1: + if (dma1[n] == 0) + case 0: + break; + default: + dev_err(dev, "invalid capture DMA %d\n", dma2[n]); + return 0; + } + +mpu: + switch (mpu_port[n]) { + case SNDRV_AUTO_PORT: + dev_warn(dev, "mpu_port not specified; not using MPU-401\n"); + mpu_port[n] = -1; + goto fm; + case 0x300: + config[n] |= GALAXY_CONFIG_MPU_ENABLE | GALAXY_CONFIG_MPUA_300; + break; + case 0x330: + config[n] |= GALAXY_CONFIG_MPU_ENABLE | GALAXY_CONFIG_MPUA_330; + break; + default: + dev_err(dev, "invalid MPU port %#lx\n", mpu_port[n]); + return 0; + } + + switch (mpu_irq[n]) { + case SNDRV_AUTO_IRQ: + dev_warn(dev, "mpu_irq not specified; using polling mode\n"); + mpu_irq[n] = -1; + break; + case 2: + mpu_irq[n] = 9; + case 9: + config[n] |= GALAXY_CONFIG_MPUIRQ_2; + break; +#ifdef AZT1605 + case 3: + config[n] |= GALAXY_CONFIG_MPUIRQ_3; + break; +#endif + case 5: + config[n] |= GALAXY_CONFIG_MPUIRQ_5; + break; + case 7: + config[n] |= GALAXY_CONFIG_MPUIRQ_7; + break; +#ifdef AZT2316 + case 10: + config[n] |= GALAXY_CONFIG_MPUIRQ_10; + break; +#endif + default: + dev_err(dev, "invalid MPU IRQ %d\n", mpu_irq[n]); + return 0; + } + + if (mpu_irq[n] == irq[n]) { + dev_err(dev, "cannot share IRQ between WSS and MPU-401\n"); + return 0; + } + +fm: + switch (fm_port[n]) { + case SNDRV_AUTO_PORT: + dev_warn(dev, "fm_port not specified: not using OPL3\n"); + fm_port[n] = -1; + break; + case 0x388: + break; + default: + dev_err(dev, "illegal FM port %#lx\n", fm_port[n]); + return 0; + } + + config[n] |= GALAXY_CONFIG_GAME_ENABLE; + return 1; +} + +static int __devinit galaxy_init(struct snd_galaxy *galaxy, u8 *type) +{ + u8 major; + u8 minor; + int err; + + err = dsp_reset(galaxy->port); + if (err < 0) + return err; + + err = dsp_get_version(galaxy->port, &major, &minor); + if (err < 0) + return err; + + if (major != GALAXY_DSP_MAJOR || minor != GALAXY_DSP_MINOR) + return -ENODEV; + + err = dsp_command(galaxy->port, DSP_COMMAND_GALAXY_8); + if (err < 0) + return err; + + err = dsp_command(galaxy->port, GALAXY_COMMAND_GET_TYPE); + if (err < 0) + return err; + + err = dsp_get_byte(galaxy->port, type); + if (err < 0) + return err; + + return 0; +} + +static int __devinit galaxy_set_mode(struct snd_galaxy *galaxy, u8 mode) +{ + int err; + + err = dsp_command(galaxy->port, DSP_COMMAND_GALAXY_9); + if (err < 0) + return err; + + err = dsp_command(galaxy->port, mode); + if (err < 0) + return err; + +#ifdef AZT1605 + /* + * Needed for MPU IRQ on AZT1605, but AZT2316 loses WSS again + */ + err = dsp_reset(galaxy->port); + if (err < 0) + return err; +#endif + + return 0; +} + +static void galaxy_set_config(struct snd_galaxy *galaxy, u32 config) +{ + u8 tmp = ioread8(galaxy->config_port + CONFIG_PORT_SET); + int i; + + iowrite8(tmp | 0x80, galaxy->config_port + CONFIG_PORT_SET); + for (i = 0; i < GALAXY_CONFIG_SIZE; i++) { + iowrite8(config, galaxy->config_port + i); + config >>= 8; + } + iowrite8(tmp & 0x7f, galaxy->config_port + CONFIG_PORT_SET); + msleep(10); +} + +static void __devinit galaxy_config(struct snd_galaxy *galaxy, u32 config) +{ + int i; + + for (i = GALAXY_CONFIG_SIZE; i; i--) { + u8 tmp = ioread8(galaxy->config_port + i - 1); + galaxy->config = (galaxy->config << 8) | tmp; + } + config |= galaxy->config & GALAXY_CONFIG_MASK; + galaxy_set_config(galaxy, config); +} + +static int __devinit galaxy_wss_config(struct snd_galaxy *galaxy, u8 wss_config) +{ + int err; + + err = wss_detect(galaxy->wss_port); + if (err < 0) + return err; + + wss_set_config(galaxy->wss_port, wss_config); + + err = galaxy_set_mode(galaxy, GALAXY_MODE_WSS); + if (err < 0) + return err; + + return 0; +} + +static void snd_galaxy_free(struct snd_card *card) +{ + struct snd_galaxy *galaxy = card->private_data; + + if (galaxy->wss_port) { + wss_set_config(galaxy->wss_port, 0); + ioport_unmap(galaxy->wss_port); + release_and_free_resource(galaxy->res_wss_port); + } + if (galaxy->config_port) { + galaxy_set_config(galaxy, galaxy->config); + ioport_unmap(galaxy->config_port); + release_and_free_resource(galaxy->res_config_port); + } + if (galaxy->port) { + ioport_unmap(galaxy->port); + release_and_free_resource(galaxy->res_port); + } +} + +static int __devinit snd_galaxy_probe(struct device *dev, unsigned int n) +{ + struct snd_galaxy *galaxy; + struct snd_wss *chip; + struct snd_card *card; + u8 type; + int err; + + err = snd_card_create(index[n], id[n], THIS_MODULE, sizeof *galaxy, + &card); + if (err < 0) + return err; + + snd_card_set_dev(card, dev); + + card->private_free = snd_galaxy_free; + galaxy = card->private_data; + + galaxy->res_port = request_region(port[n], 16, DRV_NAME); + if (!galaxy->res_port) { + dev_err(dev, "could not grab ports %#lx-%#lx\n", port[n], + port[n] + 15); + err = -EBUSY; + goto error; + } + galaxy->port = ioport_map(port[n], 16); + + err = galaxy_init(galaxy, &type); + if (err < 0) { + dev_err(dev, "did not find a Sound Galaxy at %#lx\n", port[n]); + goto error; + } + dev_info(dev, "Sound Galaxy (type %d) found at %#lx\n", type, port[n]); + + galaxy->res_config_port = request_region(port[n] + GALAXY_PORT_CONFIG, + 16, DRV_NAME); + if (!galaxy->res_config_port) { + dev_err(dev, "could not grab ports %#lx-%#lx\n", + port[n] + GALAXY_PORT_CONFIG, + port[n] + GALAXY_PORT_CONFIG + 15); + err = -EBUSY; + goto error; + } + galaxy->config_port = ioport_map(port[n] + GALAXY_PORT_CONFIG, 16); + + galaxy_config(galaxy, config[n]); + + galaxy->res_wss_port = request_region(wss_port[n], 4, DRV_NAME); + if (!galaxy->res_wss_port) { + dev_err(dev, "could not grab ports %#lx-%#lx\n", wss_port[n], + wss_port[n] + 3); + err = -EBUSY; + goto error; + } + galaxy->wss_port = ioport_map(wss_port[n], 4); + + err = galaxy_wss_config(galaxy, wss_config[n]); + if (err < 0) { + dev_err(dev, "could not configure WSS\n"); + goto error; + } + + strcpy(card->driver, DRV_NAME); + strcpy(card->shortname, DRV_NAME); + sprintf(card->longname, "%s at %#lx/%#lx, irq %d, dma %d/%d", + card->shortname, port[n], wss_port[n], irq[n], dma1[n], + dma2[n]); + + err = snd_wss_create(card, wss_port[n] + 4, -1, irq[n], dma1[n], + dma2[n], WSS_HW_DETECT, 0, &chip); + if (err < 0) + goto error; + + err = snd_wss_pcm(chip, 0, NULL); + if (err < 0) + goto error; + + err = snd_wss_mixer(chip); + if (err < 0) + goto error; + + err = snd_wss_timer(chip, 0, NULL); + if (err < 0) + goto error; + + if (mpu_port[n] >= 0) { + err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, + mpu_port[n], 0, mpu_irq[n], + IRQF_DISABLED, NULL); + if (err < 0) + goto error; + } + + if (fm_port[n] >= 0) { + struct snd_opl3 *opl3; + + err = snd_opl3_create(card, fm_port[n], fm_port[n] + 2, + OPL3_HW_AUTO, 0, &opl3); + if (err < 0) { + dev_err(dev, "no OPL device at %#lx\n",fm_port[n]); + goto error; + } + err = snd_opl3_timer_new(opl3, 1, 2); + if (err < 0) + goto error; + + err = snd_opl3_hwdep_new(opl3, 0, 1, NULL); + if (err < 0) + goto error; + } + + err = snd_card_register(card); + if (err < 0) + goto error; + + dev_set_drvdata(dev, card); + return 0; + +error: + snd_card_free(card); + return err; +} + +static int __devexit snd_galaxy_remove(struct device *dev, unsigned int n) +{ + snd_card_free(dev_get_drvdata(dev)); + dev_set_drvdata(dev, NULL); + return 0; +} + +static struct isa_driver snd_galaxy_driver = { + .match = snd_galaxy_match, + .probe = snd_galaxy_probe, + .remove = __devexit_p(snd_galaxy_remove), + + .driver = { + .name = DEV_NAME + } +}; + +static int __init alsa_card_galaxy_init(void) +{ + return isa_register_driver(&snd_galaxy_driver, SNDRV_CARDS); +} + +static void __exit alsa_card_galaxy_exit(void) +{ + isa_unregister_driver(&snd_galaxy_driver); +} + +module_init(alsa_card_galaxy_init); +module_exit(alsa_card_galaxy_exit); -- 1.7.2.1 --------------050004030209000400030603--

1 0

[PATCH] ISA: New Aztech Sound Galaxy driver
by René Herman 11 Aug '10

11 Aug '10

This is a new driver for Aztech Sound Galaxy ISA soundcards based on the AZT1605 and AZT2316 chipsets. It's constructed as two seperate drivers for either chipset generated from the same source file, with (very) minimal ifdeffery. The drivers check the SB DSP version to decide if they are being loaded for the right chip. AZT1605 returns 2.1 by default and AZT2316 3.1. This isn't full-proof as the DSP version can actually be set through software but it's close enough -- as far as I've been able to see, the DSP version can not be stored in the EEPROM and the cards will therefore startup with the defaults. This distinction could (with the same success rate) also be used to decide which chip we're looking at at runtime meaning a single, merged driver is also an option but I feel it's actually nicer this way. A merged driver would have to postpone translating the passed in resource values to the card configuration until it knew which one it was looking at and would need to postpone erring out on mpu_irq=10 for azt1605 and mpu_irq=3 for azt2316. The drivers have been tested on various cards. For snd-azt1605: FCC-ID I38-MMSN811: Aztech Sound Galaxy Nova 16 Extra FCC-ID I38-MMSN822: Aztech Sound Galaxy Pro 16 II and for snd-azt2316: FCC-ID I38-MMSN824: Aztech Sound Galaxy Pro 16 AB FCC-ID I38-MMSN826: Trust Sound Expert DeLuxe Wave 32 (05201) FCC-ID I38-MMSN830: Trust Sound Expert DeLuxe 16+ (05202) FCC-ID I38-MMSN837: Packard Bell ISA Soundcard 030069 FCC-ID I38-MMSN846: Trust Sound Expert DeLuxe 16-3D (06300) FCC-ID I38-MMSN847: Trust Sound Expert DeLuxe Wave 32-3D (06301) FCC-ID I38-MMSN852: Aztech Sound Galaxy Waverider Pro 32-3D 826 and 846 were also marketed directly by Aztech and then known as: FCC-ID I38-MMSN826: Aztech Sound Galaxy Waverider 32+ FCC-ID I38-MMSN846: Aztech Sound Galaxy Nova 16 Extra II-3D Together, these cover the AZT1605 and AT2316A, AZT2316R and AZT2316-S chipsets. All cards work fully -- full-duplex PCM, MIDI and FM. Full duplex is a little flaky on some. I38-MSN811 tends to not work in full-duplex but sometimes does with the highest success rate being achieved when you first start the capture and then a playback instead of the other way around (it's a CS4231-KL codec). The cards with an AD1845XP codec (my I38-MMSN826 and one of my I38-MMSN830s) are also somewhat duplex-challenged. Sometimes full-duplex works, sometimes not and this varies from try to try. This seems likely to be a timing problem somewhere inside wss-lib. I38-MMSN826 has an additional "ICS2115 WaveFront" wavetable synth onboard that isn't supported yet. The wavetable synths on I38-MMSN847 and I38-MMSN852 are wired directly to the standard MPU-401 UART and the AUX1 input on the codec and work without problem. CD-ROM audio on the cards is routed to the codec "Line" input, Line-In to its Aux input, and FM/Wavetable to its AUX1 input. I did not rename the controls due to the capture source enumeration: I see that capture-source overrides are hardcoded in wss-lib and this is just too ugly to live. Versus the old snd-sgalaxy driver these drivers add support for the models without a configuration EEPROM (which are common), full-duplex, MPU-401 UART and OPL3. In the future they might grow support for that ICS2115 WaveFront synth on 826 and an hwdep interface to write to the EEPROM on the models that have one. Signed-off-by: Rene Herman <rene.herman(a)gmail.com> --- Documentation/sound/alsa/ALSA-Configuration.txt | 68 +++ sound/isa/Kconfig | 26 + sound/isa/Makefile | 2 +- sound/isa/galaxy/Makefile | 10 + sound/isa/galaxy/azt1605.c | 91 ++++ sound/isa/galaxy/azt2316.c | 111 ++++ sound/isa/galaxy/galaxy.c | 652 +++++++++++++++++++++++ 7 files changed, 959 insertions(+), 1 deletions(-) create mode 100644 sound/isa/galaxy/Makefile create mode 100644 sound/isa/galaxy/azt1605.c create mode 100644 sound/isa/galaxy/azt2316.c create mode 100644 sound/isa/galaxy/galaxy.c diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 2075bbb..52f6725 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -300,6 +300,74 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. control correctly. If you have problems regarding this, try another ALSA compliant mixer (alsamixer works). + Module snd-azt1605 + ------------------ + + Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605 + chipset. + + port - port # for BASE (0x220,0x240,0x260,0x280) + wss_port - port # for WSS (0x530,0x604,0xe80,0xf40) + irq - IRQ # for WSS (7,9,10,11) + dma1 - DMA # for WSS playback (0,1,3) + dma2 - DMA # for WSS capture (0,1), -1 = disabled (default) + mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default) + mpu_irq - IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default) + fm_port - port # for OPL3 (0x388), -1 = disabled (default) + + This module supports multiple cards. It does not support autoprobe: port, + wss_port, irq and dma1 have to be specified. The other values are + optional. + + "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) + or the value stored in the card's EEPROM for cards that have an EEPROM and + their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can + be choosen freely from the options enumerated above. + + If dma2 is specified and different from dma1, the card will operate in + full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to + enable capture since only channels 0 and 1 are available for capture. + + Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0 + mpu_port=0x330 mpu_irq=9 fm_port=0x388". + + Whatever IRQ and DMA channels you pick, be sure to reserve them for + legacy ISA in your BIOS. + + Module snd-azt2316 + ------------------ + + Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316 + chipset. + + port - port # for BASE (0x220,0x240,0x260,0x280) + wss_port - port # for WSS (0x530,0x604,0xe80,0xf40) + irq - IRQ # for WSS (7,9,10,11) + dma1 - DMA # for WSS playback (0,1,3) + dma2 - DMA # for WSS capture (0,1), -1 = disabled (default) + mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default) + mpu_irq - IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default) + fm_port - port # for OPL3 (0x388), -1 = disabled (default) + + This module supports multiple cards. It does not support autoprobe: port, + wss_port, irq and dma1 have to be specified. The other values are + optional. + + "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240) + or the value stored in the card's EEPROM for cards that have an EEPROM and + their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can + be choosen freely from the options enumerated above. + + If dma2 is specified and different from dma1, the card will operate in + full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to + enable capture since only channels 0 and 1 are available for capture. + + Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0 + mpu_port=0x330 mpu_irq=9 fm_port=0x388". + + Whatever IRQ and DMA channels you pick, be sure to reserve them for + legacy ISA in your BIOS. + Module snd-aw2 -------------- diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index c6990c6..f9aa13d 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -77,6 +77,32 @@ config SND_ALS100 To compile this driver as a module, choose M here: the module will be called snd-als100. +config SND_AZT1605 + tristate "Aztech AZT1605 Driver" + depends on SND + select SND_WSS_LIB + select SND_MPU401_UART + select SND_OPL3_LIB + help + Say Y here to include support for Aztech Sound Galaxy cards + based on the AZT1605 chipset. + + To compile this driver as a module, choose M here: the module + will be called snd-azt1605. + +config SND_AZT2316 + tristate "Aztech AZT2316 Driver" + depends on SND + select SND_WSS_LIB + select SND_MPU401_UART + select SND_OPL3_LIB + help + Say Y here to include support for Aztech Sound Galaxy cards + based on the AZT2316 chipset. + + To compile this driver as a module, choose M here: the module + will be called snd-azt2316. + config SND_AZT2320 tristate "Aztech Systems AZT2320" depends on PNP diff --git a/sound/isa/Makefile b/sound/isa/Makefile index c73d30c..d2bd8f5 100644 --- a/sound/isa/Makefile +++ b/sound/isa/Makefile @@ -24,5 +24,5 @@ obj-$(CONFIG_SND_SC6000) += snd-sc6000.o obj-$(CONFIG_SND_SGALAXY) += snd-sgalaxy.o obj-$(CONFIG_SND_SSCAPE) += snd-sscape.o -obj-$(CONFIG_SND) += ad1816a/ ad1848/ cs423x/ es1688/ gus/ msnd/ opti9xx/ \ +obj-$(CONFIG_SND) += ad1816a/ ad1848/ cs423x/ es1688/ galaxy/ gus/ msnd/ opti9xx/ \ sb/ wavefront/ wss/ diff --git a/sound/isa/galaxy/Makefile b/sound/isa/galaxy/Makefile new file mode 100644 index 0000000..e307066 --- /dev/null +++ b/sound/isa/galaxy/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for ALSA +# Copyright (c) 2001 by Jaroslav Kysela <perex(a)suse.cz> +# + +snd-azt1605-objs := azt1605.o +snd-azt2316-objs := azt2316.o + +obj-$(CONFIG_SND_AZT1605) += snd-azt1605.o +obj-$(CONFIG_SND_AZT2316) += snd-azt2316.o diff --git a/sound/isa/galaxy/azt1605.c b/sound/isa/galaxy/azt1605.c new file mode 100644 index 0000000..9a97643 --- /dev/null +++ b/sound/isa/galaxy/azt1605.c @@ -0,0 +1,91 @@ +/* + * Aztech AZT1605 Driver + * Copyright (C) 2007,2010 Rene Herman + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#define AZT1605 + +#define CRD_NAME "Aztech AZT1605" +#define DRV_NAME "AZT1605" +#define DEV_NAME "azt1605" + +#define GALAXY_DSP_MAJOR 2 +#define GALAXY_DSP_MINOR 1 + +#define GALAXY_CONFIG_SIZE 3 + +/* + * 24-bit config register + */ + +#define GALAXY_CONFIG_SBA_220 (0 << 0) +#define GALAXY_CONFIG_SBA_240 (1 << 0) +#define GALAXY_CONFIG_SBA_260 (2 << 0) +#define GALAXY_CONFIG_SBA_280 (3 << 0) +#define GALAXY_CONFIG_SBA_MASK GALAXY_CONFIG_SBA_280 + +#define GALAXY_CONFIG_MPUA_300 (0 << 2) +#define GALAXY_CONFIG_MPUA_330 (1 << 2) + +#define GALAXY_CONFIG_MPU_ENABLE (1 << 3) + +#define GALAXY_CONFIG_GAME_ENABLE (1 << 4) + +#define GALAXY_CONFIG_CD_PANASONIC (1 << 5) +#define GALAXY_CONFIG_CD_MITSUMI (1 << 6) +#define GALAXY_CONFIG_CD_MASK (\ + GALAXY_CONFIG_CD_PANASONIC | GALAXY_CONFIG_CD_MITSUMI) + +#define GALAXY_CONFIG_UNUSED (1 << 7) +#define GALAXY_CONFIG_UNUSED_MASK GALAXY_CONFIG_UNUSED + +#define GALAXY_CONFIG_SBIRQ_2 (1 << 8) +#define GALAXY_CONFIG_SBIRQ_3 (1 << 9) +#define GALAXY_CONFIG_SBIRQ_5 (1 << 10) +#define GALAXY_CONFIG_SBIRQ_7 (1 << 11) + +#define GALAXY_CONFIG_MPUIRQ_2 (1 << 12) +#define GALAXY_CONFIG_MPUIRQ_3 (1 << 13) +#define GALAXY_CONFIG_MPUIRQ_5 (1 << 14) +#define GALAXY_CONFIG_MPUIRQ_7 (1 << 15) + +#define GALAXY_CONFIG_WSSA_530 (0 << 16) +#define GALAXY_CONFIG_WSSA_604 (1 << 16) +#define GALAXY_CONFIG_WSSA_E80 (2 << 16) +#define GALAXY_CONFIG_WSSA_F40 (3 << 16) + +#define GALAXY_CONFIG_WSS_ENABLE (1 << 18) + +#define GALAXY_CONFIG_CDIRQ_11 (1 << 19) +#define GALAXY_CONFIG_CDIRQ_12 (1 << 20) +#define GALAXY_CONFIG_CDIRQ_15 (1 << 21) +#define GALAXY_CONFIG_CDIRQ_MASK (\ + GALAXY_CONFIG_CDIRQ_11 | GALAXY_CONFIG_CDIRQ_12 |\ + GALAXY_CONFIG_CDIRQ_15) + +#define GALAXY_CONFIG_CDDMA_DISABLE (0 << 22) +#define GALAXY_CONFIG_CDDMA_0 (1 << 22) +#define GALAXY_CONFIG_CDDMA_1 (2 << 22) +#define GALAXY_CONFIG_CDDMA_3 (3 << 22) +#define GALAXY_CONFIG_CDDMA_MASK GALAXY_CONFIG_CDDMA_3 + +#define GALAXY_CONFIG_MASK (\ + GALAXY_CONFIG_SBA_MASK | GALAXY_CONFIG_CD_MASK |\ + GALAXY_CONFIG_UNUSED_MASK | GALAXY_CONFIG_CDIRQ_MASK |\ + GALAXY_CONFIG_CDDMA_MASK) + +#include "galaxy.c" diff --git a/sound/isa/galaxy/azt2316.c b/sound/isa/galaxy/azt2316.c new file mode 100644 index 0000000..1894411 --- /dev/null +++ b/sound/isa/galaxy/azt2316.c @@ -0,0 +1,111 @@ +/* + * Aztech AZT2316 Driver + * Copyright (C) 2007,2010 Rene Herman + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#define AZT2316 + +#define CRD_NAME "Aztech AZT2316" +#define DRV_NAME "AZT2316" +#define DEV_NAME "azt2316" + +#define GALAXY_DSP_MAJOR 3 +#define GALAXY_DSP_MINOR 1 + +#define GALAXY_CONFIG_SIZE 4 + +/* + * 32-bit config register + */ + +#define GALAXY_CONFIG_SBA_220 (0 << 0) +#define GALAXY_CONFIG_SBA_240 (1 << 0) +#define GALAXY_CONFIG_SBA_260 (2 << 0) +#define GALAXY_CONFIG_SBA_280 (3 << 0) +#define GALAXY_CONFIG_SBA_MASK GALAXY_CONFIG_SBA_280 + +#define GALAXY_CONFIG_SBIRQ_2 (1 << 2) +#define GALAXY_CONFIG_SBIRQ_5 (1 << 3) +#define GALAXY_CONFIG_SBIRQ_7 (1 << 4) +#define GALAXY_CONFIG_SBIRQ_10 (1 << 5) + +#define GALAXY_CONFIG_SBDMA_DISABLE (0 << 6) +#define GALAXY_CONFIG_SBDMA_0 (1 << 6) +#define GALAXY_CONFIG_SBDMA_1 (2 << 6) +#define GALAXY_CONFIG_SBDMA_3 (3 << 6) + +#define GALAXY_CONFIG_WSSA_530 (0 << 8) +#define GALAXY_CONFIG_WSSA_604 (1 << 8) +#define GALAXY_CONFIG_WSSA_E80 (2 << 8) +#define GALAXY_CONFIG_WSSA_F40 (3 << 8) + +#define GALAXY_CONFIG_WSS_ENABLE (1 << 10) + +#define GALAXY_CONFIG_GAME_ENABLE (1 << 11) + +#define GALAXY_CONFIG_MPUA_300 (0 << 12) +#define GALAXY_CONFIG_MPUA_330 (1 << 12) + +#define GALAXY_CONFIG_MPU_ENABLE (1 << 13) + +#define GALAXY_CONFIG_CDA_310 (0 << 14) +#define GALAXY_CONFIG_CDA_320 (1 << 14) +#define GALAXY_CONFIG_CDA_340 (2 << 14) +#define GALAXY_CONFIG_CDA_350 (3 << 14) +#define GALAXY_CONFIG_CDA_MASK GALAXY_CONFIG_CDA_350 + +#define GALAXY_CONFIG_CD_DISABLE (0 << 16) +#define GALAXY_CONFIG_CD_PANASONIC (1 << 16) +#define GALAXY_CONFIG_CD_SONY (2 << 16) +#define GALAXY_CONFIG_CD_MITSUMI (3 << 16) +#define GALAXY_CONFIG_CD_AZTECH (4 << 16) +#define GALAXY_CONFIG_CD_UNUSED_5 (5 << 16) +#define GALAXY_CONFIG_CD_UNUSED_6 (6 << 16) +#define GALAXY_CONFIG_CD_UNUSED_7 (7 << 16) +#define GALAXY_CONFIG_CD_MASK GALAXY_CONFIG_CD_UNUSED_7 + +#define GALAXY_CONFIG_CDDMA8_DISABLE (0 << 20) +#define GALAXY_CONFIG_CDDMA8_0 (1 << 20) +#define GALAXY_CONFIG_CDDMA8_1 (2 << 20) +#define GALAXY_CONFIG_CDDMA8_3 (3 << 20) +#define GALAXY_CONFIG_CDDMA8_MASK GALAXY_CONFIG_CDDMA8_3 + +#define GALAXY_CONFIG_CDDMA16_DISABLE (0 << 22) +#define GALAXY_CONFIG_CDDMA16_5 (1 << 22) +#define GALAXY_CONFIG_CDDMA16_6 (2 << 22) +#define GALAXY_CONFIG_CDDMA16_7 (3 << 22) +#define GALAXY_CONFIG_CDDMA16_MASK GALAXY_CONFIG_CDDMA16_7 + +#define GALAXY_CONFIG_MPUIRQ_2 (1 << 24) +#define GALAXY_CONFIG_MPUIRQ_5 (1 << 25) +#define GALAXY_CONFIG_MPUIRQ_7 (1 << 26) +#define GALAXY_CONFIG_MPUIRQ_10 (1 << 27) + +#define GALAXY_CONFIG_CDIRQ_5 (1 << 28) +#define GALAXY_CONFIG_CDIRQ_11 (1 << 29) +#define GALAXY_CONFIG_CDIRQ_12 (1 << 30) +#define GALAXY_CONFIG_CDIRQ_15 (1 << 31) +#define GALAXY_CONFIG_CDIRQ_MASK (\ + GALAXY_CONFIG_CDIRQ_5 | GALAXY_CONFIG_CDIRQ_11 |\ + GALAXY_CONFIG_CDIRQ_12 | GALAXY_CONFIG_CDIRQ_15) + +#define GALAXY_CONFIG_MASK (\ + GALAXY_CONFIG_SBA_MASK | GALAXY_CONFIG_CDA_MASK |\ + GALAXY_CONFIG_CD_MASK | GALAXY_CONFIG_CDDMA16_MASK |\ + GALAXY_CONFIG_CDDMA8_MASK | GALAXY_CONFIG_CDIRQ_MASK) + +#include "galaxy.c" diff --git a/sound/isa/galaxy/galaxy.c b/sound/isa/galaxy/galaxy.c new file mode 100644 index 0000000..ee54df0 --- /dev/null +++ b/sound/isa/galaxy/galaxy.c @@ -0,0 +1,652 @@ +/* + * Aztech AZT1605/AZT2316 Driver + * Copyright (C) 2007,2010 Rene Herman + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/isa.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <asm/processor.h> +#include <sound/core.h> +#include <sound/initval.h> +#include <sound/wss.h> +#include <sound/mpu401.h> +#include <sound/opl3.h> + +MODULE_DESCRIPTION(CRD_NAME); +MODULE_AUTHOR("Rene Herman"); +MODULE_LICENSE("GPL"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard."); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); + +static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; +static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; +static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; +static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; +static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; + +module_param_array(port, long, NULL, 0444); +MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); +module_param_array(wss_port, long, NULL, 0444); +MODULE_PARM_DESC(wss_port, "WSS port # for " CRD_NAME " driver."); +module_param_array(mpu_port, long, NULL, 0444); +MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); +module_param_array(fm_port, long, NULL, 0444); +MODULE_PARM_DESC(fm_port, "FM port # for " CRD_NAME " driver."); +module_param_array(irq, int, NULL, 0444); +MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); +module_param_array(mpu_irq, int, NULL, 0444); +MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); +module_param_array(dma1, int, NULL, 0444); +MODULE_PARM_DESC(dma1, "Playback DMA # for " CRD_NAME " driver."); +module_param_array(dma2, int, NULL, 0444); +MODULE_PARM_DESC(dma2, "Capture DMA # for " CRD_NAME " driver."); + +/* + * Generic SB DSP support routines + */ + +#define DSP_PORT_RESET 0x6 +#define DSP_PORT_READ 0xa +#define DSP_PORT_COMMAND 0xc +#define DSP_PORT_STATUS 0xc +#define DSP_PORT_DATA_AVAIL 0xe + +#define DSP_SIGNATURE 0xaa + +#define DSP_COMMAND_GET_VERSION 0xe1 + +static int __devinit dsp_get_byte(void __iomem *port, u8 *val) +{ + int loops = 1000; + + while (!(ioread8(port + DSP_PORT_DATA_AVAIL) & 0x80)) { + if (!loops--) + return -EIO; + cpu_relax(); + } + *val = ioread8(port + DSP_PORT_READ); + return 0; +} + +static int __devinit dsp_reset(void __iomem *port) +{ + u8 val; + + iowrite8(1, port + DSP_PORT_RESET); + udelay(10); + iowrite8(0, port + DSP_PORT_RESET); + + if (dsp_get_byte(port, &val) < 0 || val != DSP_SIGNATURE) + return -ENODEV; + + return 0; +} + +static int __devinit dsp_command(void __iomem *port, u8 cmd) +{ + int loops = 1000; + + while (ioread8(port + DSP_PORT_STATUS) & 0x80) { + if (!loops--) + return -EIO; + cpu_relax(); + } + iowrite8(cmd, port + DSP_PORT_COMMAND); + return 0; +} + +static int __devinit dsp_get_version(void __iomem *port, u8 *major, u8 *minor) +{ + int err; + + err = dsp_command(port, DSP_COMMAND_GET_VERSION); + if (err < 0) + return err; + + err = dsp_get_byte(port, major); + if (err < 0) + return err; + + err = dsp_get_byte(port, minor); + if (err < 0) + return err; + + return 0; +} + +/* + * Generic WSS support routines + */ + +#define WSS_CONFIG_DMA_0 (1 << 0) +#define WSS_CONFIG_DMA_1 (2 << 0) +#define WSS_CONFIG_DMA_3 (3 << 0) +#define WSS_CONFIG_DUPLEX (1 << 2) +#define WSS_CONFIG_IRQ_7 (1 << 3) +#define WSS_CONFIG_IRQ_9 (2 << 3) +#define WSS_CONFIG_IRQ_10 (3 << 3) +#define WSS_CONFIG_IRQ_11 (4 << 3) + +#define WSS_PORT_CONFIG 0 +#define WSS_PORT_SIGNATURE 3 + +#define WSS_SIGNATURE 4 + +static int __devinit wss_detect(void __iomem *wss_port) +{ + if ((ioread8(wss_port + WSS_PORT_SIGNATURE) & 0x3f) != WSS_SIGNATURE) + return -ENODEV; + + return 0; +} + +static void wss_set_config(void __iomem *wss_port, u8 wss_config) +{ + iowrite8(wss_config, wss_port + WSS_PORT_CONFIG); +} + +/* + * Aztech Sound Galaxy specifics + */ + +#define GALAXY_PORT_CONFIG 1024 +#define CONFIG_PORT_SET 4 + +#define DSP_COMMAND_GALAXY_8 8 +#define GALAXY_COMMAND_GET_TYPE 5 + +#define DSP_COMMAND_GALAXY_9 9 +#define GALAXY_COMMAND_WSSMODE 0 +#define GALAXY_COMMAND_SB8MODE 1 + +#define GALAXY_MODE_WSS GALAXY_COMMAND_WSSMODE +#define GALAXY_MODE_SB8 GALAXY_COMMAND_SB8MODE + +struct snd_galaxy { + void __iomem *port; + void __iomem *config_port; + void __iomem *wss_port; + u32 config; + struct resource *res_port; + struct resource *res_config_port; + struct resource *res_wss_port; +}; + +static u32 config[SNDRV_CARDS]; +static u8 wss_config[SNDRV_CARDS]; + +static int __devinit snd_galaxy_match(struct device *dev, unsigned int n) +{ + if (!enable[n]) + return 0; + + switch (port[n]) { + case SNDRV_AUTO_PORT: + dev_err(dev, "please specify port\n"); + return 0; + case 0x220: + config[n] |= GALAXY_CONFIG_SBA_220; + break; + case 0x240: + config[n] |= GALAXY_CONFIG_SBA_240; + break; + case 0x260: + config[n] |= GALAXY_CONFIG_SBA_260; + break; + case 0x280: + config[n] |= GALAXY_CONFIG_SBA_280; + break; + default: + dev_err(dev, "invalid port %#lx\n", port[n]); + return 0; + } + + switch (wss_port[n]) { + case SNDRV_AUTO_PORT: + dev_err(dev, "please specify wss_port\n"); + return 0; + case 0x530: + config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_530; + break; + case 0x604: + config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_604; + break; + case 0xe80: + config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_E80; + break; + case 0xf40: + config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_F40; + break; + default: + dev_err(dev, "invalid WSS port %#lx\n", wss_port[n]); + return 0; + } + + switch (irq[n]) { + case SNDRV_AUTO_IRQ: + dev_err(dev, "please specify irq\n"); + return 0; + case 7: + wss_config[n] |= WSS_CONFIG_IRQ_7; + break; + case 2: + irq[n] = 9; + case 9: + wss_config[n] |= WSS_CONFIG_IRQ_9; + break; + case 10: + wss_config[n] |= WSS_CONFIG_IRQ_10; + break; + case 11: + wss_config[n] |= WSS_CONFIG_IRQ_11; + break; + default: + dev_err(dev, "invalid IRQ %d\n", irq[n]); + return 0; + } + + switch (dma1[n]) { + case SNDRV_AUTO_DMA: + dev_err(dev, "please specify dma1\n"); + return 0; + case 0: + wss_config[n] |= WSS_CONFIG_DMA_0; + break; + case 1: + wss_config[n] |= WSS_CONFIG_DMA_1; + break; + case 3: + wss_config[n] |= WSS_CONFIG_DMA_3; + break; + default: + dev_err(dev, "invalid playback DMA %d\n", dma1[n]); + return 0; + } + + if (dma2[n] == SNDRV_AUTO_DMA || dma2[n] == dma1[n]) { + dma2[n] = -1; + goto mpu; + } + + wss_config[n] |= WSS_CONFIG_DUPLEX; + switch (dma2[n]) { + case 0: + break; + case 1: + if (dma1[n] == 0) + break; + default: + dev_err(dev, "invalid capture DMA %d\n", dma2[n]); + return 0; + } + +mpu: + switch (mpu_port[n]) { + case SNDRV_AUTO_PORT: + dev_warn(dev, "mpu_port not specified; not using MPU-401\n"); + mpu_port[n] = -1; + goto fm; + case 0x300: + config[n] |= GALAXY_CONFIG_MPU_ENABLE | GALAXY_CONFIG_MPUA_300; + break; + case 0x330: + config[n] |= GALAXY_CONFIG_MPU_ENABLE | GALAXY_CONFIG_MPUA_330; + break; + default: + dev_err(dev, "invalid MPU port %#lx\n", mpu_port[n]); + return 0; + } + + switch (mpu_irq[n]) { + case SNDRV_AUTO_IRQ: + dev_warn(dev, "mpu_irq not specified: using polling mode\n"); + mpu_irq[n] = -1; + break; + case 2: + mpu_irq[n] = 9; + case 9: + config[n] |= GALAXY_CONFIG_MPUIRQ_2; + break; +#ifdef AZT1605 + case 3: + config[n] |= GALAXY_CONFIG_MPUIRQ_3; + break; +#endif + case 5: + config[n] |= GALAXY_CONFIG_MPUIRQ_5; + break; + case 7: + config[n] |= GALAXY_CONFIG_MPUIRQ_7; + break; +#ifdef AZT2316 + case 10: + config[n] |= GALAXY_CONFIG_MPUIRQ_10; + break; +#endif + default: + dev_err(dev, "invalid MPU IRQ %d\n", mpu_irq[n]); + return 0; + } + + if (mpu_irq[n] == irq[n]) { + dev_err(dev, "cannot share IRQ between WSS and MPU-401\n"); + return 0; + } + +fm: + switch (fm_port[n]) { + case SNDRV_AUTO_PORT: + dev_warn(dev, "fm_port not specified: not using OPL3\n"); + fm_port[n] = -1; + break; + case 0x388: + break; + default: + dev_err(dev, "illegal FM port %#lx\n", fm_port[n]); + return 0; + } + + config[n] |= GALAXY_CONFIG_GAME_ENABLE; + return 1; +} + +static int __devinit galaxy_init(struct snd_galaxy *galaxy, u8 *type) +{ + u8 major; + u8 minor; + int err; + + err = dsp_reset(galaxy->port); + if (err < 0) + return err; + + err = dsp_get_version(galaxy->port, &major, &minor); + if (err < 0) + return err; + + if (major != GALAXY_DSP_MAJOR || minor != GALAXY_DSP_MINOR) + return -ENODEV; + + err = dsp_command(galaxy->port, DSP_COMMAND_GALAXY_8); + if (err < 0) + return err; + + err = dsp_command(galaxy->port, GALAXY_COMMAND_GET_TYPE); + if (err < 0) + return err; + + err = dsp_get_byte(galaxy->port, type); + if (err < 0) + return err; + + return 0; +} + +static int __devinit galaxy_set_mode(struct snd_galaxy *galaxy, u8 mode) +{ + int err; + + err = dsp_command(galaxy->port, DSP_COMMAND_GALAXY_9); + if (err < 0) + return err; + + err = dsp_command(galaxy->port, mode); + if (err < 0) + return err; + +#ifdef AZT1605 + /* + * Needed for MPU IRQ on AZT1605, but AZT2316 loses WSS again + */ + err = dsp_reset(galaxy->port); + if (err < 0) + return err; +#endif + + return 0; +} + +static void galaxy_set_config(struct snd_galaxy *galaxy, u32 config) +{ + u8 tmp = ioread8(galaxy->config_port + CONFIG_PORT_SET); + int i; + + iowrite8(tmp | 0x80, galaxy->config_port + CONFIG_PORT_SET); + for (i = 0; i < GALAXY_CONFIG_SIZE; i++) { + iowrite8(config, galaxy->config_port + i); + config >>= 8; + } + iowrite8(tmp & 0x7f, galaxy->config_port + CONFIG_PORT_SET); + msleep(10); +} + +static void __devinit galaxy_config(struct snd_galaxy *galaxy, u32 config) +{ + int i; + + for (i = GALAXY_CONFIG_SIZE; i; i--) { + u8 tmp = ioread8(galaxy->config_port + i - 1); + galaxy->config = (galaxy->config << 8) | tmp; + } + config |= galaxy->config & GALAXY_CONFIG_MASK; + galaxy_set_config(galaxy, config); +} + +static int __devinit galaxy_wss_config(struct snd_galaxy *galaxy, u8 wss_config) +{ + int err; + + err = wss_detect(galaxy->wss_port); + if (err < 0) + return err; + + wss_set_config(galaxy->wss_port, wss_config); + + err = galaxy_set_mode(galaxy, GALAXY_MODE_WSS); + if (err < 0) + return err; + + return 0; +} + +static void snd_galaxy_free(struct snd_card *card) +{ + struct snd_galaxy *galaxy = card->private_data; + + if (galaxy->wss_port) { + wss_set_config(galaxy->wss_port, 0); + ioport_unmap(galaxy->wss_port); + release_and_free_resource(galaxy->res_wss_port); + } + if (galaxy->config_port) { + galaxy_set_config(galaxy, galaxy->config); + ioport_unmap(galaxy->config_port); + release_and_free_resource(galaxy->res_config_port); + } + if (galaxy->port) { + ioport_unmap(galaxy->port); + release_and_free_resource(galaxy->res_port); + } +} + +static int __devinit snd_galaxy_probe(struct device *dev, unsigned int n) +{ + struct snd_galaxy *galaxy; + struct snd_wss *chip; + struct snd_card *card; + u8 type; + int err; + + err = snd_card_create(index[n], id[n], THIS_MODULE, sizeof *galaxy, + &card); + if (err < 0) + return err; + + snd_card_set_dev(card, dev); + + card->private_free = snd_galaxy_free; + galaxy = card->private_data; + + galaxy->res_port = request_region(port[n], 16, DRV_NAME); + if (!galaxy->res_port) { + dev_err(dev, "could not grab ports %#lx-%#lx\n", port[n], + port[n] + 15); + err = -EBUSY; + goto error; + } + galaxy->port = ioport_map(port[n], 16); + + err = galaxy_init(galaxy, &type); + if (err < 0) { + dev_err(dev, "did not find a Sound Galaxy at %#lx\n", port[n]); + goto error; + } + dev_info(dev, "Sound Galaxy (type %d) found at %#lx\n", type, port[n]); + + galaxy->res_config_port = request_region(port[n] + GALAXY_PORT_CONFIG, + 16, DRV_NAME); + if (!galaxy->res_config_port) { + dev_err(dev, "could not grab ports %#lx-%#lx\n", + port[n] + GALAXY_PORT_CONFIG, + port[n] + GALAXY_PORT_CONFIG + 15); + err = -EBUSY; + goto error; + } + galaxy->config_port = ioport_map(port[n] + GALAXY_PORT_CONFIG, 16); + + galaxy_config(galaxy, config[n]); + + galaxy->res_wss_port = request_region(wss_port[n], 4, DRV_NAME); + if (!galaxy->res_wss_port) { + dev_err(dev, "could not grab ports %#lx-%#lx\n", wss_port[n], + wss_port[n] + 3); + err = -EBUSY; + goto error; + } + galaxy->wss_port = ioport_map(wss_port[n], 4); + + err = galaxy_wss_config(galaxy, wss_config[n]); + if (err < 0) { + dev_err(dev, "could not configure WSS\n"); + goto error; + } + + strcpy(card->driver, DRV_NAME); + strcpy(card->shortname, DRV_NAME); + sprintf(card->longname, "%s at %#lx/%#lx, irq %d, dma %d/%d", + card->shortname, port[n], wss_port[n], irq[n], dma1[n], + dma2[n]); + + err = snd_wss_create(card, wss_port[n] + 4, -1, irq[n], dma1[n], + dma2[n], WSS_HW_DETECT, 0, &chip); + if (err < 0) + goto error; + + err = snd_wss_pcm(chip, 0, NULL); + if (err < 0) + goto error; + + err = snd_wss_mixer(chip); + if (err < 0) + goto error; + + err = snd_wss_timer(chip, 0, NULL); + if (err < 0) + goto error; + + if (mpu_port[n] >= 0) { + err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, + mpu_port[n], 0, mpu_irq[n], + IRQF_DISABLED, NULL); + if (err < 0) + goto error; + } + + if (fm_port[n] >= 0) { + struct snd_opl3 *opl3; + + err = snd_opl3_create(card, fm_port[n], fm_port[n] + 2, + OPL3_HW_AUTO, 0, &opl3); + if (err < 0) { + dev_err(dev, "no OPL device at %#lx\n", fm_port[n]); + goto error; + } + err = snd_opl3_timer_new(opl3, 1, 2); + if (err < 0) + goto error; + + err = snd_opl3_hwdep_new(opl3, 0, 1, NULL); + if (err < 0) + goto error; + } + + err = snd_card_register(card); + if (err < 0) + goto error; + + dev_set_drvdata(dev, card); + return 0; + +error: + snd_card_free(card); + return err; +} + +static int __devexit snd_galaxy_remove(struct device *dev, unsigned int n) +{ + snd_card_free(dev_get_drvdata(dev)); + dev_set_drvdata(dev, NULL); + return 0; +} + +static struct isa_driver snd_galaxy_driver = { + .match = snd_galaxy_match, + .probe = snd_galaxy_probe, + .remove = __devexit_p(snd_galaxy_remove), + + .driver = { + .name = DEV_NAME + } +}; + +static int __init alsa_card_galaxy_init(void) +{ + return isa_register_driver(&snd_galaxy_driver, SNDRV_CARDS); +} + +static void __exit alsa_card_galaxy_exit(void) +{ + isa_unregister_driver(&snd_galaxy_driver); +} + +module_init(alsa_card_galaxy_init); +module_exit(alsa_card_galaxy_exit); -- 1.7.2.1 --------------070903030802030302060701--

1 0

[alsa-devel] Forward: [PATCH] sound: usb: USB3 Super Speed patch
by Takashi Iwai 11 Aug '10

11 Aug '10

1 0

[alsa-devel] VIA VT1708S
by dominique.baudelin 11 Aug '10

11 Aug '10

Asus Notebook X70 Series X70AD Athlon M300-64 Ati Radeon HD 4570 OS Lucid Lynx 10.04 LTS Audio chipset VIA VT1708S Dear Sir, In HD-Audio-Models.txt.gz file I don't find the VIA VT1708S codec and the assiociated Model name. Have you got this information? I would like write: options snd-hda-intel model=?????? at the end of alsa-base.conf file. Yours sincerely, M. Dominique Baudelin P.S.:If you aren't the good interlocutor I am sorry to disturb you. Une messagerie gratuite, garantie à vie et des services en plus, ça vous tente ? Je crée ma boîte mail www.laposte.net

4 4

[alsa-devel] [PATCH 00/17] ASoC: multi-component - CODECs
by Liam Girdwood 11 Aug '10

11 Aug '10

This is the second part of the multi-component series and focuses on the changes required to support ASoC multi-component on CODEC drivers. I've split the CODEC driver patches into smaller chunks and tried to group (where possible) similar CODECs together. All the patches will be rebased together at upstream time so we don't break bisect. Most CODEC drivers were extremely straight forward with changes limited to their probe() and remove() sections. Some CODECs did require a little extra work and this is marked in their commit messages. Again, it's not a one man effort. I've had help from the folks mentioned in the cover email for the core. Liam Girdwood (17): ASoC: multi-component - AKM CODECs ASoC: multi-component - cs4720, cs42l51 and da7210 CODECs ASoC: multi-component - pcm3008, ssm2602, jz4740 and uda1380 ASoC: multi-component - TI CODECs ASoC: multi-component - open firmware ASoC: multi-component - Generic AC97 and SPDIF CODECs ASoC: multi-component - cq93vc, cx20442, stac9766 and UDA134x CODECs ASoC: multi-component - Wolfson WM85xx CODECs ASoC: multi-component - Wolfson WM87xx CODECs ASoC: multi-component - Wolfson wm8900, 8903, 8904 and 8955 CODECs ASoC: multi-component - Wolfson wm8960, 8961, 8940 and 8941 CODECs ASoC: multi-component - Wolfson WM8971, 8993, 8990 and 8974 CODECs ASoC: multi-component - Wolfson WM8978, 8988 and 8994 CODECs ASoC: multi-component - Wolfson WM90xx CODECs ASoC: multi-component - Wolfson AudioPlus CODECs ASoC: multi-component - Wolfson WM97xx AC97 CODECs ASoC: multi-component - remove no longer needed codec headers include/sound/soc-of-simple.h | 4 +- include/sound/tlv320aic3x.h | 43 ++++- sound/soc/codecs/ac97.c | 124 +++++------ sound/soc/codecs/ac97.h | 19 -- sound/soc/codecs/ads117x.h | 13 - sound/soc/codecs/ak4104.c | 149 +++++-------- sound/soc/codecs/ak4104.h | 7 - sound/soc/codecs/ak4535.c | 236 +++++--------------- sound/soc/codecs/ak4535.h | 8 - sound/soc/codecs/ak4642.c | 175 +++------------ sound/soc/codecs/ak4642.h | 20 -- sound/soc/codecs/ak4671.c | 141 +++--------- sound/soc/codecs/ak4671.h | 3 - sound/soc/codecs/cq93vc.c | 132 +++--------- sound/soc/codecs/cq93vc.h | 29 --- sound/soc/codecs/cs4270.c | 393 ++++++++++++--------------------- sound/soc/codecs/cs4270.h | 28 --- sound/soc/codecs/cs42l51.c | 293 ++++++++----------------- sound/soc/codecs/cs42l51.h | 2 - sound/soc/codecs/cx20442.c | 146 +++---------- sound/soc/codecs/cx20442.h | 2 - sound/soc/codecs/da7210.c | 157 +++----------- sound/soc/codecs/da7210.h | 24 -- sound/soc/codecs/jz4740.c | 116 +++-------- sound/soc/codecs/jz4740.h | 20 -- sound/soc/codecs/pcm3008.c | 92 ++++----- sound/soc/codecs/pcm3008.h | 3 - sound/soc/codecs/spdif_transciever.c | 102 +-------- sound/soc/codecs/spdif_transciever.h | 18 -- sound/soc/codecs/ssm2602.c | 219 +++++------------- sound/soc/codecs/ssm2602.h | 3 - sound/soc/codecs/stac9766.c | 118 ++++------ sound/soc/codecs/stac9766.h | 4 - sound/soc/codecs/tlv320aic23.c | 182 +++++---------- sound/soc/codecs/tlv320aic23.h | 3 - sound/soc/codecs/tlv320aic26.c | 180 +++++---------- sound/soc/codecs/tlv320aic26.h | 3 - sound/soc/codecs/tlv320aic3x.c | 223 ++++++------------- sound/soc/codecs/tlv320aic3x.h | 43 ---- sound/soc/codecs/tlv320dac33.c | 249 +++++++-------------- sound/soc/codecs/tlv320dac33.h | 3 - sound/soc/codecs/twl4030.c | 231 ++++++------------- sound/soc/codecs/twl4030.h | 55 ----- sound/soc/codecs/twl6040.c | 170 ++++----------- sound/soc/codecs/twl6040.h | 3 - sound/soc/codecs/uda134x.c | 154 +++++-------- sound/soc/codecs/uda134x.h | 3 - sound/soc/codecs/uda1380.c | 211 +++++------------- sound/soc/codecs/uda1380.h | 3 - sound/soc/codecs/wm2000.h | 3 - sound/soc/codecs/wm8350.c | 231 +++++++------------ sound/soc/codecs/wm8350.h | 3 - sound/soc/codecs/wm8400.c | 181 ++++----------- sound/soc/codecs/wm8400.h | 3 - sound/soc/codecs/wm8510.c | 290 ++++++++---------------- sound/soc/codecs/wm8510.h | 3 - sound/soc/codecs/wm8523.c | 180 ++++----------- sound/soc/codecs/wm8523.h | 3 - sound/soc/codecs/wm8580.c | 186 +++++----------- sound/soc/codecs/wm8580.h | 3 - sound/soc/codecs/wm8711.c | 206 +++++------------ sound/soc/codecs/wm8711.h | 3 - sound/soc/codecs/wm8727.c | 106 +-------- sound/soc/codecs/wm8727.h | 21 -- sound/soc/codecs/wm8728.c | 294 ++++++++----------------- sound/soc/codecs/wm8728.h | 9 - sound/soc/codecs/wm8731.c | 217 ++++++------------- sound/soc/codecs/wm8731.h | 3 - sound/soc/codecs/wm8741.c | 204 +++++------------ sound/soc/codecs/wm8741.h | 3 - sound/soc/codecs/wm8750.c | 269 +++++++--------------- sound/soc/codecs/wm8750.h | 9 - sound/soc/codecs/wm8753.c | 407 ++++++++++++---------------------- sound/soc/codecs/wm8753.h | 3 - sound/soc/codecs/wm8776.c | 251 ++++++--------------- sound/soc/codecs/wm8776.h | 3 - sound/soc/codecs/wm8900.c | 251 ++++++++++----------- sound/soc/codecs/wm8900.h | 3 - sound/soc/codecs/wm8903.c | 268 ++++++++-------------- sound/soc/codecs/wm8903.h | 3 - sound/soc/codecs/wm8904.c | 208 +++++------------ sound/soc/codecs/wm8904.h | 3 - sound/soc/codecs/wm8940.c | 199 +++++------------ sound/soc/codecs/wm8940.h | 2 - sound/soc/codecs/wm8955.c | 184 ++++------------ sound/soc/codecs/wm8955.h | 3 - sound/soc/codecs/wm8960.c | 209 ++++++------------ sound/soc/codecs/wm8960.h | 3 - sound/soc/codecs/wm8961.c | 241 +++++++-------------- sound/soc/codecs/wm8961.h | 3 - sound/soc/codecs/wm8971.c | 250 ++++++--------------- sound/soc/codecs/wm8971.h | 8 - sound/soc/codecs/wm8974.c | 171 ++++---------- sound/soc/codecs/wm8974.h | 3 - sound/soc/codecs/wm8978.c | 190 +++++----------- sound/soc/codecs/wm8978.h | 3 - sound/soc/codecs/wm8988.c | 266 ++++++++--------------- sound/soc/codecs/wm8988.h | 3 - sound/soc/codecs/wm8990.c | 226 +++++-------------- sound/soc/codecs/wm8990.h | 8 - sound/soc/codecs/wm8993.c | 307 ++++++++++--------------- sound/soc/codecs/wm8993.h | 3 - sound/soc/codecs/wm8994.c | 230 +++++++------------- sound/soc/codecs/wm8994.h | 3 - sound/soc/codecs/wm9081.c | 208 +++++------------- sound/soc/codecs/wm9081.h | 3 - sound/soc/codecs/wm9090.c | 183 +++++---------- sound/soc/codecs/wm9090.h | 2 - sound/soc/codecs/wm9705.c | 116 ++++------ sound/soc/codecs/wm9705.h | 3 - sound/soc/codecs/wm9712.c | 124 +++++------ sound/soc/codecs/wm9712.h | 3 - sound/soc/codecs/wm9713.c | 131 +++++------ sound/soc/codecs/wm9713.h | 3 - sound/soc/fsl/soc-of-simple.c | 6 +- 115 files changed, 3524 insertions(+), 8162 deletions(-) delete mode 100644 sound/soc/codecs/ac97.h delete mode 100644 sound/soc/codecs/ads117x.h delete mode 100644 sound/soc/codecs/ak4104.h delete mode 100644 sound/soc/codecs/ak4642.h delete mode 100644 sound/soc/codecs/cq93vc.h delete mode 100644 sound/soc/codecs/cs4270.h delete mode 100644 sound/soc/codecs/da7210.h delete mode 100644 sound/soc/codecs/jz4740.h delete mode 100644 sound/soc/codecs/spdif_transciever.h delete mode 100644 sound/soc/codecs/twl4030.h delete mode 100644 sound/soc/codecs/wm8727.h

1 17

[alsa-devel] [PATCH 1/5] ASoC: multi-component - Core Multi-component API
by Liam Girdwood 10 Aug '10

10 Aug '10

This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. Signed-off-by: Liam Girdwood <lrg(a)slimlogic.co.uk> --- include/sound/soc-dai.h | 98 +++++++++++++------- include/sound/soc.h | 238 ++++++++++++++++++++++++++++------------------ 2 files changed, 208 insertions(+), 128 deletions(-) diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 377693a..e7b6802 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -91,15 +91,17 @@ struct snd_pcm_substream; SNDRV_PCM_FMTBIT_S32_LE |\ SNDRV_PCM_FMTBIT_S32_BE) -struct snd_soc_dai_ops; +struct snd_soc_dai_driver; struct snd_soc_dai; struct snd_ac97_bus_ops; /* Digital Audio Interface registration */ -int snd_soc_register_dai(struct snd_soc_dai *dai); -void snd_soc_unregister_dai(struct snd_soc_dai *dai); -int snd_soc_register_dais(struct snd_soc_dai *dai, size_t count); -void snd_soc_unregister_dais(struct snd_soc_dai *dai, size_t count); +int snd_soc_register_dai(struct device *dev, + struct snd_soc_dai_driver *dai_drv); +void snd_soc_unregister_dai(struct device *dev); +int snd_soc_register_dais(struct device *dev, + struct snd_soc_dai_driver *dai_drv, size_t count); +void snd_soc_unregister_dais(struct device *dev, size_t count); /* Digital Audio Interface clocking API.*/ int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id, @@ -126,16 +128,6 @@ int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate); /* Digital Audio Interface mute */ int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute); -/* - * Digital Audio Interface. - * - * Describes the Digital Audio Interface in terms of its ALSA, DAI and AC97 - * operations and capabilities. Codec and platform drivers will register this - * structure for every DAI they have. - * - * This structure covers the clocking, formating and ALSA operations for each - * interface. - */ struct snd_soc_dai_ops { /* * DAI clocking configuration, all optional. @@ -191,24 +183,24 @@ struct snd_soc_dai_ops { }; /* - * Digital Audio Interface runtime data. + * Digital Audio Interface Driver. * - * Holds runtime data for a DAI. + * Describes the Digital Audio Interface in terms of its ALSA, DAI and AC97 + * operations and capabilities. Codec and platform drivers will register this + * structure for every DAI they have. + * + * This structure covers the clocking, formating and ALSA operations for each + * interface. */ -struct snd_soc_dai { +struct snd_soc_dai_driver { /* DAI description */ - char *name; + const char *name; unsigned int id; int ac97_control; - struct device *dev; - void *ac97_pdata; /* platform_data for the ac97 codec */ - - /* DAI callbacks */ - int (*probe)(struct platform_device *pdev, - struct snd_soc_dai *dai); - void (*remove)(struct platform_device *pdev, - struct snd_soc_dai *dai); + /* DAI driver callbacks */ + int (*probe)(struct snd_soc_dai *dai); + int (*remove)(struct snd_soc_dai *dai); int (*suspend)(struct snd_soc_dai *dai); int (*resume)(struct snd_soc_dai *dai); @@ -219,26 +211,51 @@ struct snd_soc_dai { struct snd_soc_pcm_stream capture; struct snd_soc_pcm_stream playback; unsigned int symmetric_rates:1; +}; + +/* + * Digital Audio Interface runtime data. + * + * Holds runtime data for a DAI. + */ +struct snd_soc_dai { + const char *name; + int id; + struct device *dev; + void *ac97_pdata; /* platform_data for the ac97 codec */ + + /* driver ops */ + struct snd_soc_dai_driver *driver; /* DAI runtime info */ - struct snd_soc_codec *codec; + unsigned int capture_active:1; /* stream is in use */ + unsigned int playback_active:1; /* stream is in use */ + unsigned int symmetric_rates:1; + struct snd_pcm_runtime *runtime; unsigned int active; unsigned char pop_wait:1; + unsigned char probed:1; - /* DAI private data */ - void *private_data; + /* DAI DMA data */ + void *playback_dma_data; + void *capture_dma_data; - /* parent platform */ - struct snd_soc_platform *platform; + /* parent platform/codec */ + union { + struct snd_soc_platform *platform; + struct snd_soc_codec *codec; + }; + struct snd_soc_card *card; struct list_head list; + struct list_head card_list; }; static inline void *snd_soc_dai_get_dma_data(const struct snd_soc_dai *dai, const struct snd_pcm_substream *ss) { return (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - dai->playback.dma_data : dai->capture.dma_data; + dai->playback_dma_data : dai->capture_dma_data; } static inline void snd_soc_dai_set_dma_data(struct snd_soc_dai *dai, @@ -246,9 +263,20 @@ static inline void snd_soc_dai_set_dma_data(struct snd_soc_dai *dai, void *data) { if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) - dai->playback.dma_data = data; + dai->playback_dma_data = data; else - dai->capture.dma_data = data; + dai->capture_dma_data = data; +} + +static inline void snd_soc_dai_set_drvdata(struct snd_soc_dai *dai, + void *data) +{ + dev_set_drvdata(dai->dev, data); +} + +static inline void *snd_soc_dai_get_drvdata(struct snd_soc_dai *dai) +{ + return dev_get_drvdata(dai->dev); } #endif diff --git a/include/sound/soc.h b/include/sound/soc.h index 65e9d03..6982b15 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -228,13 +228,17 @@ struct snd_soc_ops; struct snd_soc_dai_mode; struct snd_soc_pcm_runtime; struct snd_soc_dai; +struct snd_soc_dai_driver; struct snd_soc_platform; struct snd_soc_dai_link; +struct snd_soc_platform_driver; struct snd_soc_codec; +struct snd_soc_codec_driver; struct soc_enum; struct snd_soc_ac97_ops; struct snd_soc_jack; struct snd_soc_jack_pin; + #ifdef CONFIG_GPIOLIB struct snd_soc_jack_gpio; #endif @@ -249,19 +253,18 @@ enum snd_soc_control_type { SND_SOC_SPI, }; -int snd_soc_register_platform(struct snd_soc_platform *platform); -void snd_soc_unregister_platform(struct snd_soc_platform *platform); -int snd_soc_register_codec(struct snd_soc_codec *codec); -void snd_soc_unregister_codec(struct snd_soc_codec *codec); +int snd_soc_register_platform(struct device *dev, + struct snd_soc_platform_driver *platform_drv); +void snd_soc_unregister_platform(struct device *dev); +int snd_soc_register_codec(struct device *dev, + struct snd_soc_codec_driver *codec_drv, + struct snd_soc_dai_driver *dai_drv, int num_dai); +void snd_soc_unregister_codec(struct device *dev); int snd_soc_codec_volatile_register(struct snd_soc_codec *codec, int reg); int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec, int addr_bits, int data_bits, enum snd_soc_control_type control); -/* pcm <-> DAI connect */ -void snd_soc_free_pcms(struct snd_soc_device *socdev); -int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid); - /* Utility functions to get clock rates from various things */ int snd_soc_calc_frame_size(int sample_size, int channels, int tdm_slots); int snd_soc_params_to_frame_size(struct snd_pcm_hw_params *params); @@ -273,7 +276,7 @@ int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream, const struct snd_pcm_hardware *hw); /* Jack reporting */ -int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type, +int snd_soc_jack_new(struct snd_soc_codec *codec, const char *id, int type, struct snd_soc_jack *jack); void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask); int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count, @@ -390,7 +393,7 @@ struct snd_soc_jack_gpio { struct snd_soc_jack { struct snd_jack *jack; - struct snd_soc_card *card; + struct snd_soc_codec *codec; struct list_head pins; int status; struct blocking_notifier_head notifier; @@ -398,15 +401,13 @@ struct snd_soc_jack { /* SoC PCM stream information */ struct snd_soc_pcm_stream { - char *stream_name; + const char *stream_name; u64 formats; /* SNDRV_PCM_FMTBIT_* */ unsigned int rates; /* SNDRV_PCM_RATE_* */ unsigned int rate_min; /* min rate */ unsigned int rate_max; /* max rate */ unsigned int channels_min; /* min channels */ unsigned int channels_max; /* max channels */ - unsigned int active; /* stream is in use */ - void *dma_data; /* used by platform code */ }; /* SoC audio ops */ @@ -419,44 +420,36 @@ struct snd_soc_ops { int (*trigger)(struct snd_pcm_substream *, int); }; -/* SoC Audio Codec */ +/* SoC Audio Codec device */ struct snd_soc_codec { - char *name; - struct module *owner; - struct mutex mutex; + const char *name; + int id; struct device *dev; - struct snd_soc_device *socdev; + struct snd_soc_codec_driver *driver; + struct mutex mutex; + struct snd_card *snd_card; + struct snd_soc_card *card; struct list_head list; - - /* callbacks */ - int (*set_bias_level)(struct snd_soc_codec *, - enum snd_soc_bias_level level); + struct list_head card_list; + int num_dai; /* runtime */ - struct snd_card *card; struct snd_ac97 *ac97; /* for ad-hoc ac97 devices */ unsigned int active; - unsigned int pcm_devs; - void *drvdata; + unsigned int idle_bias_off:1; /* Use BIAS_OFF instead of STANDBY */ + unsigned int cache_only:1; /* Suppress writes to hardware */ + unsigned int cache_sync:1; /* Cache needs to be synced to hardware */ + unsigned int suspended:1; /* Codec is in suspend PM state */ + unsigned int probed:1; /* Codec has been probed */ + unsigned int ac97_registered:1; /* Codec has been AC97 registered */ + unsigned int sysfs_registered:1; /* codec has been sysfs registered */ /* codec IO */ void *control_data; /* codec control (i2c/3wire) data */ - unsigned int (*read)(struct snd_soc_codec *, unsigned int); - int (*write)(struct snd_soc_codec *, unsigned int, unsigned int); - int (*display_register)(struct snd_soc_codec *, char *, - size_t, unsigned int); - int (*volatile_register)(unsigned int); - int (*readable_register)(unsigned int); hw_write_t hw_write; unsigned int (*hw_read)(struct snd_soc_codec *, unsigned int); void *reg_cache; - short reg_cache_size; - short reg_cache_step; - - unsigned int idle_bias_off:1; /* Use BIAS_OFF instead of STANDBY */ - unsigned int cache_only:1; /* Suppress writes to hardware */ - unsigned int cache_sync:1; /* Cache needs to be synced to hardware */ /* dapm */ u32 pop_time; @@ -466,10 +459,6 @@ struct snd_soc_codec { enum snd_soc_bias_level suspend_bias_level; struct delayed_work delayed_work; - /* codec DAI's */ - struct snd_soc_dai *dai; - unsigned int num_dai; - #ifdef CONFIG_DEBUG_FS struct dentry *debugfs_codec_root; struct dentry *debugfs_reg; @@ -478,23 +467,40 @@ struct snd_soc_codec { #endif }; -/* codec device */ -struct snd_soc_codec_device { - int (*probe)(struct platform_device *pdev); - int (*remove)(struct platform_device *pdev); - int (*suspend)(struct platform_device *pdev, pm_message_t state); - int (*resume)(struct platform_device *pdev); +/* codec driver */ +struct snd_soc_codec_driver { + + /* driver ops */ + int (*probe)(struct snd_soc_codec *); + int (*remove)(struct snd_soc_codec *); + int (*suspend)(struct snd_soc_codec *, + pm_message_t state); + int (*resume)(struct snd_soc_codec *); + + /* codec IO */ + unsigned int (*read)(struct snd_soc_codec *, unsigned int); + int (*write)(struct snd_soc_codec *, unsigned int, unsigned int); + int (*display_register)(struct snd_soc_codec *, char *, + size_t, unsigned int); + int (*volatile_register)(unsigned int); + int (*readable_register)(unsigned int); + short reg_cache_size; + short reg_cache_step; + short reg_word_size; + const void *reg_cache_default; + + /* codec bias level */ + int (*set_bias_level)(struct snd_soc_codec *, + enum snd_soc_bias_level level); }; /* SoC platform interface */ -struct snd_soc_platform { - char *name; - struct list_head list; +struct snd_soc_platform_driver { - int (*probe)(struct platform_device *pdev); - int (*remove)(struct platform_device *pdev); - int (*suspend)(struct snd_soc_dai_link *dai_link); - int (*resume)(struct snd_soc_dai_link *dai_link); + int (*probe)(struct snd_soc_platform *); + int (*remove)(struct snd_soc_platform *); + int (*suspend)(struct snd_soc_dai *dai); + int (*resume)(struct snd_soc_dai *dai); /* pcm creation and destruction */ int (*pcm_new)(struct snd_card *, struct snd_soc_dai *, @@ -509,23 +515,32 @@ struct snd_soc_platform { struct snd_soc_dai *); /* platform stream ops */ - struct snd_pcm_ops *pcm_ops; + struct snd_pcm_ops *ops; }; -/* SoC machine DAI configuration, glues a codec and cpu DAI together */ -struct snd_soc_dai_link { - char *name; /* Codec name */ - char *stream_name; /* Stream name */ +struct snd_soc_platform { + const char *name; + int id; + struct device *dev; + struct snd_soc_platform_driver *driver; - /* DAI */ - struct snd_soc_dai *codec_dai; - struct snd_soc_dai *cpu_dai; + unsigned int suspended:1; /* platform is suspended */ + unsigned int probed:1; - /* machine stream operations */ - struct snd_soc_ops *ops; + struct snd_card *snd_card; + struct snd_soc_card *card; + struct list_head list; + struct list_head card_list; +}; - /* codec/machine specific init - e.g. add machine controls */ - int (*init)(struct snd_soc_codec *codec); +struct snd_soc_dai_link { + /* config - must be set by machine driver */ + const char *name; /* Codec name */ + const char *stream_name; /* Stream name */ + const char *codec_name; /* for multi-codec */ + const char *platform_name; /* for multi-platform */ + const char *cpu_dai_name; + const char *codec_dai_name; /* Keep DAI active over suspend */ unsigned int ignore_suspend:1; @@ -533,21 +548,24 @@ struct snd_soc_dai_link { /* Symmetry requirements */ unsigned int symmetric_rates:1; - /* Symmetry data - only valid if symmetry is being enforced */ - unsigned int rate; + /* codec/machine specific init - e.g. add machine controls */ + int (*init)(struct snd_soc_pcm_runtime *rtd); - /* DAI pcm */ - struct snd_pcm *pcm; + /* machine stream operations */ + struct snd_soc_ops *ops; }; /* SoC card */ struct snd_soc_card { - char *name; + const char *name; struct device *dev; + struct snd_card *snd_card; + struct module *owner; struct list_head list; + struct mutex mutex; - int instantiated; + bool instantiated; int (*probe)(struct platform_device *pdev); int (*remove)(struct platform_device *pdev); @@ -568,28 +586,38 @@ struct snd_soc_card { /* CPU <--> Codec DAI links */ struct snd_soc_dai_link *dai_link; int num_links; + struct snd_soc_pcm_runtime *rtd; + int num_rtd; - struct snd_soc_device *socdev; - - struct snd_soc_codec *codec; - - struct snd_soc_platform *platform; - struct delayed_work delayed_work; struct work_struct deferred_resume_work; + + /* lists of probed devices belonging to this card */ + struct list_head codec_dev_list; + struct list_head platform_dev_list; + struct list_head dai_dev_list; }; -/* SoC Device - the audio subsystem */ -struct snd_soc_device { - struct device *dev; +/* SoC machine DAI configuration, glues a codec and cpu DAI together */ +struct snd_soc_pcm_runtime { + struct device dev; struct snd_soc_card *card; - struct snd_soc_codec_device *codec_dev; - void *codec_data; -}; + struct snd_soc_dai_link *dai_link; + + unsigned int complete:1; + unsigned int dev_registered:1; -/* runtime channel data */ -struct snd_soc_pcm_runtime { - struct snd_soc_dai_link *dai; - struct snd_soc_device *socdev; + /* Symmetry data - only valid if symmetry is being enforced */ + unsigned int rate; + long pmdown_time; + + /* runtime devices */ + struct snd_pcm *pcm; + struct snd_soc_codec *codec; + struct snd_soc_platform *platform; + struct snd_soc_dai *codec_dai; + struct snd_soc_dai *cpu_dai; + + struct delayed_work delayed_work; }; /* mixer control */ @@ -615,24 +643,48 @@ struct soc_enum { static inline unsigned int snd_soc_read(struct snd_soc_codec *codec, unsigned int reg) { - return codec->read(codec, reg); + return codec->driver->read(codec, reg); } static inline unsigned int snd_soc_write(struct snd_soc_codec *codec, unsigned int reg, unsigned int val) { - return codec->write(codec, reg, val); + return codec->driver->write(codec, reg, val); } +/* device driver data */ + static inline void snd_soc_codec_set_drvdata(struct snd_soc_codec *codec, - void *data) + void *data) { - codec->drvdata = data; + dev_set_drvdata(codec->dev, data); } static inline void *snd_soc_codec_get_drvdata(struct snd_soc_codec *codec) { - return codec->drvdata; + return dev_get_drvdata(codec->dev); +} + +static inline void snd_soc_platform_set_drvdata(struct snd_soc_platform *platform, + void *data) +{ + dev_set_drvdata(platform->dev, data); +} + +static inline void *snd_soc_platform_get_drvdata(struct snd_soc_platform *platform) +{ + return dev_get_drvdata(platform->dev); +} + +static inline void snd_soc_pcm_set_drvdata(struct snd_soc_pcm_runtime *rtd, + void *data) +{ + dev_set_drvdata(&rtd->dev, data); +} + +static inline void *snd_soc_pcm_get_drvdata(struct snd_soc_pcm_runtime *rtd) +{ + return dev_get_drvdata(&rtd->dev); } #include <sound/soc-dai.h> -- 1.7.0.4

1 4

[alsa-devel] [PATCH 0/5] ASoC: multi-component core update
by Liam Girdwood 10 Aug '10

10 Aug '10

ASoC is now coming up to it's 5th birthday *tomorrow* and is beginning to show it's age a little when it comes to supporting the next generation of smart phones and multimedia devices with it's current single CODEC and single DMA platform design. Historically, ASoC is designed around an embedded sound card with a single CODEC and a single platform DMA driver (with multiple DAIs). This design works great for most of the current audio hardware in use now, however we are now seeing hardware designs for the next generation of devices that can have many CODECs, DMAs, DSPs and a host of other audio peripherals connected to the audio subsystem. ASoC now needs to support the new audio hardware architectures with multiple audio CODECs, DMA engines, DSPs, DAIs etc in order to keep Linux audio working well on SoC based devices. This patch series allows an ASoC sound card to support multiple components (CODECs, DAI and DMA) and is the first part in a series of work (other parts coming later in the year from Mark and I) designed to enhance ASoC for modern mobile audio hardware. This patch series provides the following important features:- 1) Allow sound cards to have multiple CODECs and platform DMA controllers. 2) Allow CODEC drivers to support more than one CODEC device. 3) Allow all CODEC, platform DMA and DAI drivers to have platform data. This is achieved by: - 1) Separating the component struct driver data from the component struct device data. 2) Making all components kernel devices. (A side effect of this change is that we can now store all our component private data in struct device private data (like everyone else does) and there is also now less pointer indirection for components.) The multi-component changes mainly affect only the probe() and remove() sections of component drivers, the component enumeration section of the core and the machine driver DAI link configuration. The core also now handles setting up the CODEC data structs too (meaning CODEC drivers now don't have to do this). All component PCM, DAPM and Kcontrol operations remain unchanged. I've so far tested the new multi-component enumeration on the TI OMAP and Marvell PXA platforms with AC97, MFD and I2C based CODECs. I do however need ASoC platform maintainers to test on their systems (as I only have a subset of the hardware). Some ASOC platforms do need a little extra checking/fixups too :- o i.MX platform: required work to de-couple components (Sascha is now fixing/testing this). o Injenic J4740 platform: I do not have a toolchain to even build this arch so it will also need someone to build it too. Lars ? If you find your platform does not work then the most likely reason is that I'm missing a platform_device registration for your CODEC, DAI, etc. device in your arch board.c or device.c files. Please let me know or send a patch :) All the multi-component code is in my topic/multi-component branch here :- git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6.git This patch series post contains the changes to ASoC core only. I'll post the multi-component CODEC and platform changes as separate patches in order not to flood the list (as there are about 40 patches in all). This patch series will eventually be rebased into a single patch for upstream so we don't break bisect. The subsequent patches for CODECs and platforms in this series can be found in the git branch above. The intention is to merge now for the 2.6.37 merge window opening soon. However, some platforms may require some remedial work to get them working correctly and we should take this work as incremental changes over the 2.6.37 merge window period. Most of the remedial work should be minor in nature and I mostly expect changes to the device names. By merging now (and not waiting on further remedial changes) means we will not blocking new code in development (something that has been happening lately). I've also squashed quite a lot of fixes and updates in this series, but the multi-component support is also brought to you (in no particular order) by Peter, Jarkko, Timur, Ryan, Chanwoo, Joonyoug, Kyungmin, Jassi, Seungwhan and Sascha. Liam Girdwood (5): ASoC: multi-component - Core Multi-component API ASoC: multi-component - DAPM Core ASoC: multi-component - ASoC Core ASoC: multi-component - Jack Core ASoC: multi-component - Cache Core include/sound/soc-dai.h | 98 ++- include/sound/soc-dapm.h | 8 +- include/sound/soc.h | 238 ++++--- sound/soc/soc-cache.c | 34 +- sound/soc/soc-core.c | 1665 +++++++++++++++++++++++++++------------------- sound/soc/soc-dapm.c | 88 ++-- sound/soc/soc-jack.c | 10 +- 7 files changed, 1273 insertions(+), 868 deletions(-)

1 0

[alsa-devel] ASoC updates for 2.6.36
by Mark Brown 10 Aug '10

10 Aug '10

The following changes since commit bda7d2a862e6b788bca2d02d38a07966a9c92e48: ASoC: TWL4030: Capture route runtime DAPM ordering fix (2010-08-04 00:42:39 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.36 Cliff Cai (1): ASoC: register cache should be 1 byte aligned for 1 byte long register Eric Bénard (1): ASoC: Fix for changed Eureka Kconfig symbol names Mark Brown (1): ASoC: Fix inverted mute controls for WM8580 Sonic Zhang (1): ASoC: add AD1980 obsolete information A bunch of small, easy to parse, fixes here plus the documentation updated on the obsoletion of the AD1980. sound/soc/blackfin/Kconfig | 7 ++++++- sound/soc/blackfin/bf5xx-ad1980.c | 10 +++++++++- sound/soc/codecs/ad1980.c | 10 +++++++++- sound/soc/codecs/ad1980.h | 6 ++++++ sound/soc/codecs/wm8580.c | 6 +++--- sound/soc/imx/Kconfig | 4 +++- sound/soc/soc-cache.c | 4 ++-- 7 files changed, 38 insertions(+), 9 deletions(-)

2 1

[alsa-devel] [PATCH] ASoC: add AD1980 obsolete information
by Mike Frysinger 10 Aug '10

10 Aug '10

From: Sonic Zhang <sonic.zhang(a)analog.com> This codec has been obsoleted by ADI, so add appropriate warnings to the source tree to dissuade people from using in new designs based on driver support. Signed-off-by: Sonic Zhang <sonic.zhang(a)analog.com> Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- sound/soc/blackfin/Kconfig | 7 ++++++- sound/soc/blackfin/bf5xx-ad1980.c | 10 +++++++++- sound/soc/codecs/ad1980.c | 10 +++++++++- sound/soc/codecs/ad1980.h | 6 ++++++ 4 files changed, 30 insertions(+), 3 deletions(-) diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig index 75bbc90..b73ee38 100644 --- a/sound/soc/blackfin/Kconfig +++ b/sound/soc/blackfin/Kconfig @@ -113,13 +113,18 @@ config SND_BF5XX_RESET_GPIO_NUM Set the correct GPIO for RESET the sound chip. config SND_BF5XX_SOC_AD1980 - tristate "SoC AD1980/1 Audio support for BF5xx" + tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)" depends on SND_BF5XX_AC97 select SND_BF5XX_SOC_AC97 select SND_SOC_AD1980 help Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. + Warning: + Because Analog Devices Inc. discontinued the ad1980 sound chip since + Sep. 2009, this ad1980 driver is not maintained, tested and supported + by ADI now. + config SND_BF5XX_SOC_SPORT tristate diff --git a/sound/soc/blackfin/bf5xx-ad1980.c b/sound/soc/blackfin/bf5xx-ad1980.c index d8f5912..92f7c32 100644 --- a/sound/soc/blackfin/bf5xx-ad1980.c +++ b/sound/soc/blackfin/bf5xx-ad1980.c @@ -26,6 +26,14 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* + * WARNING: + * + * Because Analog Devices Inc. discontinued the ad1980 sound chip since + * Sep. 2009, this ad1980 driver is not maintained, tested and supported + * by ADI now. + */ + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/device.h> @@ -109,5 +117,5 @@ module_exit(bf5xx_board_exit); /* Module information */ MODULE_AUTHOR("Cliff Cai"); -MODULE_DESCRIPTION("ALSA SoC AD1980/1 BF5xx board"); +MODULE_DESCRIPTION("ALSA SoC AD1980/1 BF5xx board (Obsolete)"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c index 0420727..70cfaec 100644 --- a/sound/soc/codecs/ad1980.c +++ b/sound/soc/codecs/ad1980.c @@ -11,6 +11,14 @@ * option) any later version. */ +/* + * WARNING: + * + * Because Analog Devices Inc. discontinued the ad1980 sound chip since + * Sep. 2009, this ad1980 driver is not maintained, tested and supported + * by ADI now. + */ + #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> @@ -298,6 +306,6 @@ struct snd_soc_codec_device soc_codec_dev_ad1980 = { }; EXPORT_SYMBOL_GPL(soc_codec_dev_ad1980); -MODULE_DESCRIPTION("ASoC ad1980 driver"); +MODULE_DESCRIPTION("ASoC ad1980 driver (Obsolete)"); MODULE_AUTHOR("Roy Huang, Cliff Cai"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ad1980.h b/sound/soc/codecs/ad1980.h index db6c850..538f37c 100644 --- a/sound/soc/codecs/ad1980.h +++ b/sound/soc/codecs/ad1980.h @@ -1,5 +1,11 @@ /* * ad1980.h -- ad1980 Soc Audio driver + * + * WARNING: + * + * Because Analog Devices Inc. discontinued the ad1980 sound chip since + * Sep. 2009, this ad1980 driver is not maintained, tested and supported + * by ADI now. */ #ifndef _AD1980_H -- 1.7.2

2 1

[alsa-devel] [PATCH] ASoC: register cache should be 1 byte aligned for 1 byte long register
by Mike Frysinger 10 Aug '10

10 Aug '10

From: Cliff Cai <cliff.cai(a)analog.com> Signed-off-by: Cliff Cai <cliff.cai(a)analog.com> Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- sound/soc/soc-cache.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c index 472af38..adbc68c 100644 --- a/sound/soc/soc-cache.c +++ b/sound/soc/soc-cache.c @@ -340,7 +340,7 @@ static unsigned int snd_soc_16_8_read_i2c(struct snd_soc_codec *codec, static unsigned int snd_soc_16_8_read(struct snd_soc_codec *codec, unsigned int reg) { - u16 *cache = codec->reg_cache; + u8 *cache = codec->reg_cache; reg &= 0xff; if (reg >= codec->reg_cache_size) @@ -351,7 +351,7 @@ static unsigned int snd_soc_16_8_read(struct snd_soc_codec *codec, static int snd_soc_16_8_write(struct snd_soc_codec *codec, unsigned int reg, unsigned int value) { - u16 *cache = codec->reg_cache; + u8 *cache = codec->reg_cache; u8 data[3]; int ret; -- 1.7.2

2 1

Re: [alsa-devel] [LAD] [LAU] mudita24 1.02 -- improved envy24control mixer/router for ice1712-based sound-cards
by Niels Mayer 10 Aug '10

10 Aug '10

On Tue, Aug 10, 2010 at 1:14 AM, <fons(a)kokkinizita.net> wrote: > - The meters are there to show levels at the AD/DA converters, > i.e. to allow you to check you are using those in a sensible > way. They happen to be on the same window as the mixer, which > can be useful as they suggest to the user which signal is > being controlled by a fader. But otherwise they are not part > of the mixer, and a better place for them would be with the > HW gain controls. The meters show the levels at the A/D&D/A's but also at other things that don't necessarily end up being routed to the analog I/O. See the "Peak" labels on http://nielsmayer.com/envy24control/envy24mixer-architecture.png ... That's: * 10 channels of hardware peak-levels of inputs (including an SPDIF pair). * 10 channels of hardware peak-level outputs (including an SPDIF pair). * 2 channels for the digital mixer output. So in reality (assuming reality==documentation== http://alsa.cybermirror.org/manuals/icensemble/envy24.pdf ) the peak meters are part of the mixer. However, the peak meter information is most useful in the "Analog Volume" panel, but that would miss four-six channels + spdif-pair of outputs. As a stopgap, I put the dBFS value alongside each channel, since adding the full meters to this panel was a much larger and more radical change than my initial patches. A better design overall, IMHO would be to combine all 20 input and output faders feeding the digital-summer into a single panel. Instead of two faders per channel, just one fader and a panpot, which would normally be swung hard-left or hard-right, but should also have a detent or page-position at center mix. The panpot would also indicate inactive and set at center-mix when "L/R Gang" is selected. Each channel would have the numeric dbFS input value displayed as a "button", which when selected, expands a meter that fills the column vertically; and deselected, it goes back to being a text display of the peak levels. That mechanism of dynamically adding a meter per channel could also be used in the "Analog Volumes" section to optionally allow meter info to be displayed alongside each slider. > - The post-fader signals in the mixer are not available anywhere, > they just get summed to the bus. They are "available" in that the output of the digital mixer is metered and that meter is always displayed in envy24control. If you want to see the resulting level of any particular channels' attenuation, "solo" it (by manually muting the other incoming channels) and observe the resulting levels under the "Digital Mixer" meters. (Actually, a "Channel Solo" option-menu would be a useful addition to the digital mixer GUI: "off", "solo left" "solo right" "solo center". -- Niels http://nielsmayer.com

1 0

Re: [alsa-devel] [LAD] [LAU] mudita24 1.02 -- improved envy24control mixer/router for ice1712-based sound-cards
by Niels Mayer 10 Aug '10

10 Aug '10

On Mon, Aug 9, 2010 at 5:53 PM, Tim E. Real <termtech(a)rogers.com> wrote: > On August 9, 2010 08:45:49 pm Tim E. Real wrote: >> Hey hey hey! >> Look what I've got... >> I thought it important and complete enough to let you see >> where it is going. Just applied the patches, compiled... AWESOME! Sliders, dB scales and meters in "Monitor Inputs" and "Monitor PCMs" resize when the window is stretched! I'm looking forward to the completion of your TODO items in AUTHORS esp the digital mixer meter resizing with stretchy scales just like the mixer's channel meters. Let me know when you have things finalized, and I'll add a mudita24 1.04 version to http://nielsmayer.com/envy24control/ . Of course the new resizeability feature brings up the issue that the sliders can become long enough to display different positions for two sliders at the same attenuator dB value. Perhaps this could be remedied by an on-release callback that sets the slider back to the center of it's actual dbFS value, e.g. -1.5dB, -3.0, -4.5, -6.0 etc... This becomes especially noticeable on a stretched slider in "Monitor Inputs" or "Monitor PCMs" due to the 1.5dB steps provided by the 24bit attenuators feeding the digital mixer. It doesn't seem to be as noticeable with the 0.5dB steps in the "Analog Volumes" panel. However, on a fully-height-expanded window, you can notice, for example, two sliders of a stereo pair showing the same dB value but slightly different positions visually. One "regression" in your change: formerly, you could click within the scale/labeling area to set focus on a given slider. This is a large and easy-to-click area if you just want to set GUI focus to that particular channel and use the scroll-wheel or keyboard up/down arrows to change values). Because if you click in the slider area to set the selection, unless you click on the slider itself, the value gets changed. > One more thing: Because of my use of gtk_adjustment_get_page_increment() > and friends, which require gtk+ 2.14, I think it may be necessary to > release this as a separate program than envy24control. > There may be people out there with old setups who need the old one. > The ALSA folks may not like replacing the old one with mudita24 for > that reason. Seems like there should be a way for their build system to handle skipping programs that use gtk2 if only gtk1 available ... at least for the myriad packages in alsa-tools "Specialist tools for ALSA" -- which might also be a perfectly appropriate place to put a latest-gtk2-using tool providing special control to a specific set of cards. I haven't surveyed the other packages to see what kind of dependencies they have... I'm CC'ing to alsa-devel in hopes of getting an answer on this. (thread summary: http://linuxaudio.org/mailarchive/lad/2010/8/8/172623 http://linuxaudio.org/mailarchive/lad/2010/8/8/172629 ) Niels http://nielsmayer.com

1 0

[alsa-devel] amp power down event (resend with the correct email)
by Michael Trimarchi 10 Aug '10

10 Aug '10

Hi all, I'm t rying to unde rstand when the event a re called. ... SND_SOC_DAPM_SPK("Front Speaker", amp_event), ... My idea was: - set the mixe r - open st ream amp_event: event => [ 169.820558] ON - close st ream and receive the event => OFF. In the aplay example this happen afte r some seconds but in my application I don't receive the OFF event. What is w rong? Michael

3 8

[alsa-devel] Minivosc entry on Wiki - discuss
by Smilen Dimitrov 10 Aug '10

10 Aug '10

Hi ALSA-devel, Since I found programming ALSA drivers - and understanding device drivers in general - quite overwhelming, I had posted my starting steps in the form of a *mini*mal *v*irtual *osc*illator ALSA driver code (minivosc), and a discussion/tutorial about it on: http://www.alsa-project.org/main/index.php/Minivosc Originally intended to be "short", it is now in itself a mouthful - just like all the other introductory stuff / tutorials I could find :) Still, I don't think having an additional point of view will hurt... So, I would please ask the community to have a glance at it - and let me know if there is something wrong with it - or if additional things (links, comments) should be added. Also, I could notice that there are two ALSA "wiki's": Main Page - AlsaProject - http://www.alsa-project.org/main/index.php/Main_Page ALSA unofficial - http://alsa.opensrc.org/index.php/Main_Page I posted the wiki entry under the 'official' one - if it is inappropriate, please let me know, and I'll move it elsewhere... Well - please let me know if you have any comments about this entry, Cheers!

1 0

[alsa-devel] Model=auto for LG R510
by David Henningsson 10 Aug '10

10 Aug '10

I've got two users saying model=auto is working better for them (it enables the internal mic and no regressions). I don't know if that is enough to remove an existing quirk, but if it is, please apply the attached patch. -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 1

[PATCH] HDA: Use model=auto for LG R510
by David Henningsson 10 Aug '10

10 Aug '10

Two users report model=auto is needed to make the internal mic work properly. BugLink: https://bugs.launchpad.net/bugs/495134 Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6b00a23..55d6e5b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -13477,7 +13477,6 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA), SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER), SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1), - SND_PCI_QUIRK(0x1854, 0x1775, "LG R510", ALC268_DELL), {} }; -- 1.7.0.4 --------------040608090104040106090302--

1 0

[alsa-devel] [PATCH 0/3] ASoC: multi-comp: OMAP platform fixes
by Peter Ujfalusi 10 Aug '10

10 Aug '10

Hello, The following series introduces some cleanups for OMAP platforms in multi-component branch. - Enable audio for OMAP1 class - Registers only the available amount of omap-mcbsp-dai devices for OMAP2,3, and 4 Please do verify, if the chages are correct, especially the number of McBSP ports on different devices. Liam: in case you take this, you can squash this to the corresponding commit. Peter --- Peter Ujfalusi (3): ASoC: multi-comp: OMAP McBSP: use macro for platform_device ASoC: multi-comp: OMAP McBSP: Enable audio on OMAP1 platform ASoC: multi-comp: OMAP2,3,4 McBSP: register correct number of ports arch/arm/mach-omap1/devices.c | 24 +++++++++++++++ arch/arm/mach-omap2/devices.c | 50 ++++++++++++++++-------------- arch/arm/plat-omap/include/plat/mcbsp.h | 7 ++++ 3 files changed, 58 insertions(+), 23 deletions(-) -- 1.7.2

5 14

[alsa-devel] patch_nvhdmi.c's snd_hda_preset_nvhdmi[] formatting, entry naming, new entries
by Stephen Warren 09 Aug '10

09 Aug '10

All, I'm working on a patch to add some new codec IDs to patch_nvhdmi.c. I notice that many lines in that table are wrapped to avoid long lines. Is there a hard 80 column limit for ALSA driver or kernel files? I'd find the table and diff much easier to read if I could simply put each new entry on a single line, but don't want to violate any hard-and-fast coding style rules... Second, I wish to add entries for some GPUs that haven't yet been released. For these, I'd like to make the codec names simply "GPU HDMI/DP", since I can't expose naming for unreleased products. We'd like to get these entries into the driver early so that they're available in distros before products ship, so that the hardware "just works" out of the box. Indications so far are that these devices will simply be standard Azalia codecs, and hence not need any code/tables/quirks to operate correctly (i.e. they'll follow the existing "MCP89" path). Finally, the naming for existing discrete GPU entries (GT220/GT21x/GT240) is a mixture of engineering GPU names and marketing names. I'd like to edit these names to also be simply "GPU HDMI/DP" for consistency. Unfortunately, I'm not allowed to submit engineering GPU names for any GPUs, and using marketing names in these entries doesn't make sense, since there may be multiple marketing names per codec ID, and the marketing names many change over time. Does anyone have any problems with any of the above before I submit a proposed patch? Thanks. -- nvpublic

2 1

[alsa-devel] [PATCH] New snd-hda-intel model/pin config for hp dv7-4000
by Steven Eastland 09 Aug '10

09 Aug '10

This provides a new model and pin config for the snd-hda-intel 92HD83XXX codec for hp laptop model dv7-4000, enabling the subwoofer. Signed-off-by: Steven Eastland <seastland at gmail.com> --- --- alsa-kernel/pci/hda/patch_sigmatel.c 2010-07-20 14:06:12.000000000 -0600 +++ alsa-kernel/pci/hda/patch_sigmatel.c 2010-07-26 13:04:55.000000000 -0600 @@ -94,6 +94,7 @@ STAC_92HD83XXX_PWR_REF, STAC_DELL_S14, STAC_92HD83XXX_HP, + STAC_HP_DV7_4000, STAC_92HD83XXX_MODELS }; @@ -1628,10 +1629,17 @@ 0x40f000f0, 0x40f000f0, }; +static unsigned int hp_dv7_4000_pin_configs[10] = { + 0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110, + 0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140, + 0x40f000f0, 0x40f000f0, +}; + static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs, [STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs, [STAC_DELL_S14] = dell_s14_pin_configs, + [STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs, }; static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = { @@ -1640,6 +1648,7 @@ [STAC_92HD83XXX_PWR_REF] = "mic-ref", [STAC_DELL_S14] = "dell-s14", [STAC_92HD83XXX_HP] = "hp", + [STAC_HP_DV7_4000] = "hp-dv7-4000", }; static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {

2 2

[alsa-devel] codec support request: Conexant ID 5068
by Cristopher Camacho Leandro 09 Aug '10

09 Aug '10

Hi all, The codec (Conexant ID 5068) required by my sound card (Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)) is not present yet in ALSA, I would highly appreciate if you guys could add support for it. You guys might find the information collected by the alsa-info.sh script on http://www.alsa-project.org/db/?f=8f8001d873d5c10c293eac1c94f2ede0b73cd865 Thanks a lot in advance for looking into this. Cheers, Cristopher

3 5

[alsa-devel] move snd-aloop to the alsa-kernel tree?
by Jaroslav Kysela 09 Aug '10

09 Aug '10

Hi all, does anyone have any objection to move the loop module (snd-aloop) from the alsa-driver tree to the alsa-kernel tree (Linux 2.6 tree)? I worked on these things last days: - fixed timing issues (we cannot use the identical period timing for both playback/capture - it also means that the capture and playback buffer setup might be different) - added proper buffer silencing when the playback is in the draining phase - added stream parameters change notification (stop the capture stream when the playback stream parameters were changed) - added controls to propagate the playback stream parameters to the user space with the notification of changes - added simple time shift functionality to compensate the time drift for another clock source Jaroslav ----- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project, Red Hat, Inc.

2 5

[alsa-devel] [PATCH] ASoC: n810: Remove tlv320aic3x i2c registration from n810 machine driver
by Jarkko Nikula 09 Aug '10

09 Aug '10

tlv320aic3x board info registration here is not working for couple of reasons: - TLV320AIC33 i2c address is 0x18 instead of 0x1b - i2c bus indexing in omap starts from 1 so bus number should be 2 - arch/arm/mach-omap2/board-n8x0.c doesn't register the second bus so devices are not probed anyway As this is not currently working and there are patches adding tlv320aic3x registration into board-n8x0.c, this patch finally removes this temporary registration. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- Liam, I'm thinking the N810 multi-component conversion. I think it would be easiest for you if there is no board-n8x0.c changes. It avoids possible merge conflicts with those upcoming registration changes and adding n810_aic33_setup can be done afterwards. I.e. it's ok if m-c removes the n810_aic33_setup from n810.c but doesn't add it to board-n8x0.c. --- sound/soc/omap/n810.c | 9 --------- 1 files changed, 0 insertions(+), 9 deletions(-) diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 08e09d7..58dcaac 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -336,13 +336,6 @@ static struct snd_soc_device n810_snd_devdata = { static struct platform_device *n810_snd_device; -/* temporary i2c device creation until this can be moved into the machine - * support file. -*/ -static struct i2c_board_info i2c_device[] = { - { I2C_BOARD_INFO("tlv320aic3x", 0x1b), } -}; - static int __init n810_soc_init(void) { int err; @@ -351,8 +344,6 @@ static int __init n810_soc_init(void) if (!(machine_is_nokia_n810() || machine_is_nokia_n810_wimax())) return -ENODEV; - i2c_register_board_info(1, i2c_device, ARRAY_SIZE(i2c_device)); - n810_snd_device = platform_device_alloc("soc-audio", -1); if (!n810_snd_device) return -ENOMEM; -- 1.7.1

1 0

[alsa-devel] [PATCH] ASoC: tlv320dac33: Fixes for multi-component
by Peter Ujfalusi 09 Aug '10

09 Aug '10

Small changes int module load sequence. Keep the codec OFF when not active. Reading the DAC33 ID at probe time. In the private struct we need pointer for the codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> --- Hello Liam, Mark! This patch is against the multi-comp branch, and makes the tlv320dac33 driver working correctly (in a similar way as it used to work). I have tested the codec with this patch on top of the multi-comp branch, and works nicely. Liam: You can squash this, if you think it's better.. Peter sound/soc/codecs/tlv320dac33.c | 61 +++++++++++++++++++--------------------- 1 files changed, 29 insertions(+), 32 deletions(-) diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index 2c6793e..a3c5b52 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -91,7 +91,7 @@ struct tlv320dac33_priv { struct mutex mutex; struct workqueue_struct *dac33_wq; struct work_struct work; - struct snd_soc_codec codec; + struct snd_soc_codec *codec; struct regulator_bulk_data supplies[DAC33_NUM_SUPPLIES]; struct snd_pcm_substream *substream; int power_gpio; @@ -650,9 +650,7 @@ static int dac33_set_bias_level(struct snd_soc_codec *codec, static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33) { - struct snd_soc_codec *codec; - - codec = &dac33->codec; + struct snd_soc_codec *codec = dac33->codec; switch (dac33->fifo_mode) { case DAC33_FIFO_MODE1: @@ -695,9 +693,7 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33) static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33) { - struct snd_soc_codec *codec; - - codec = &dac33->codec; + struct snd_soc_codec *codec = dac33->codec; switch (dac33->fifo_mode) { case DAC33_FIFO_MODE1: @@ -726,7 +722,7 @@ static void dac33_work(struct work_struct *work) u8 reg; dac33 = container_of(work, struct tlv320dac33_priv, work); - codec = &dac33->codec; + codec = dac33->codec; mutex_lock(&dac33->mutex); switch (dac33->state) { @@ -1389,6 +1385,18 @@ static int dac33_soc_probe(struct snd_soc_codec *codec) codec->control_data = dac33->control_data; codec->hw_write = (hw_write_t) i2c_master_send; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->idle_bias_off = 1; + dac33->codec = codec; + + /* Read the tlv320dac33 ID registers */ + ret = dac33_hard_power(codec, 1); + if (ret != 0) { + dev_err(codec->dev, "Failed to power up codec: %d\n", ret); + goto err_power; + } + dac33_read_id(codec); + dac33_hard_power(codec, 0); /* Check if the IRQ number is valid and request it */ if (dac33->irq >= 0) { @@ -1413,9 +1421,6 @@ static int dac33_soc_probe(struct snd_soc_codec *codec) } } - /* Power up the codec */ - dac33_hard_power(codec, 1); - snd_soc_add_controls(codec, dac33_snd_controls, ARRAY_SIZE(dac33_snd_controls)); /* Only add the FIFO controls, if we have valid IRQ number */ @@ -1427,9 +1432,9 @@ static int dac33_soc_probe(struct snd_soc_codec *codec) snd_soc_add_controls(codec, dac33_fifo_snd_controls, ARRAY_SIZE(dac33_fifo_snd_controls)); } - dac33_add_widgets(codec); +err_power: return ret; } @@ -1439,9 +1444,10 @@ static int dac33_soc_remove(struct snd_soc_codec *codec) dac33_set_bias_level(codec, SND_SOC_BIAS_OFF); - if (dac33->irq >= 0) - free_irq(dac33->irq, &dac33->codec); - + if (dac33->irq >= 0) { + free_irq(dac33->irq, dac33->codec); + destroy_workqueue(dac33->dac33_wq); + } return 0; } @@ -1516,6 +1522,8 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, dac33->control_data = client; mutex_init(&dac33->mutex); + spin_lock_init(&dac33->lock); + i2c_set_clientdata(client, dac33); dac33->power_gpio = pdata->power_gpio; @@ -1544,8 +1552,6 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, goto err_gpio; } gpio_direction_output(dac33->power_gpio, 0); - } else { - dac33->chip_power = 1; } for (i = 0; i < ARRAY_SIZE(dac33->supplies); i++) @@ -1559,21 +1565,13 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, goto err_get; } - ret = regulator_bulk_enable(ARRAY_SIZE(dac33->supplies), - dac33->supplies); - if (ret != 0) { - dev_err(&client->dev, "Failed to enable supplies: %d\n", ret); - goto err_enable; - } - ret = snd_soc_register_codec(&client->dev, &soc_codec_dev_tlv320dac33, &dac33_dai, 1); - if (ret < 0) - goto err_enable; - return ret; + goto err_register; -err_enable: + return ret; +err_register: regulator_bulk_free(ARRAY_SIZE(dac33->supplies), dac33->supplies); err_get: if (dac33->power_gpio >= 0) @@ -1588,17 +1586,16 @@ static int __devexit dac33_i2c_remove(struct i2c_client *client) struct tlv320dac33_priv *dac33 = i2c_get_clientdata(client); if (unlikely(dac33->chip_power)) - dac33_hard_power(&dac33->codec, 0); + dac33_hard_power(dac33->codec, 0); if (dac33->power_gpio >= 0) gpio_free(dac33->power_gpio); - regulator_bulk_disable(ARRAY_SIZE(dac33->supplies), dac33->supplies); regulator_bulk_free(ARRAY_SIZE(dac33->supplies), dac33->supplies); - destroy_workqueue(dac33->dac33_wq); snd_soc_unregister_codec(&client->dev); - kfree(i2c_get_clientdata(client)); + kfree(dac33); + return 0; } -- 1.7.2

2 1

[alsa-devel] [PATCH] HDA-Intel: present all 4 HDMI outputs instead of just the first one
by Anssi Hannula 09 Aug '10

09 Aug '10

Commit 92608badc519a8c1f65d93743396517aaa582b53 in linux kernel added the possibility of 3 additional HDMI devices on indexes 7-9. Present all those additional devices using the "hdmi" alias as well. Signed-off-by: Anssi Hannula <anssi.hannula(a)iki.fi> --- Note that the hints for these devices do not appear properly and the devices therefore do not appear in the output of "aplay -L" until the issue described in "Device name hints and the value of DEV" thread is fixed (with the exception of DEV=3 which happens to match the device index of the first hdmi device and is therefore shown). Also, I don't know what the "hint.device 3" was doing there and therefore I couldn't test if it continues to work as intended after changing it to "hint.device $DEVICE". Please check that it is correct. src/conf/cards/HDA-Intel.conf | 108 +++++++++++++++++++++++++++++++++++++++-- 1 files changed, 104 insertions(+), 4 deletions(-) diff --git a/src/conf/cards/HDA-Intel.conf b/src/conf/cards/HDA-Intel.conf index d3ac002..726e8c9 100644 --- a/src/conf/cards/HDA-Intel.conf +++ b/src/conf/cards/HDA-Intel.conf @@ -142,11 +142,17 @@ HDA-Intel.pcm.iec958.0 { <confdir:pcm/hdmi.conf> -HDA-Intel.pcm.hdmi.0 { - @args [ CARD AES0 AES1 AES2 AES3 ] +HDA-Intel.pcm.hdmi.common { + @args [ CARD DEVICE CTLINDEX AES0 AES1 AES2 AES3 ] @args.CARD { type string } + @args.DEVICE { + type integer + } + @args.CTLINDEX { + type integer + } @args.AES0 { type integer } @@ -163,26 +169,120 @@ HDA-Intel.pcm.hdmi.0 { slave.pcm { type hw card $CARD - device 3 + device $DEVICE } hooks.0 { type ctl_elems hook_args [ { name "IEC958 Playback Default" + index $CTLINDEX lock true preserve true value [ $AES0 $AES1 $AES2 $AES3 ] } { name "IEC958 Playback Switch" + index $CTLINDEX lock true preserve true value true } ] } - hint.device 3 + hint.device $DEVICE +} + +HDA-Intel.pcm.hdmi.0 { + @args [ CARD AES0 AES1 AES2 AES3 ] + @args.CARD { type string } + @args.AES0 { type integer } + @args.AES1 { type integer } + @args.AES2 { type integer } + @args.AES3 { type integer } + @func refer + name { + @func concat + strings [ + "cards.HDA-Intel.pcm.hdmi.common:" + "CARD=" $CARD "," + "DEVICE=3," + "CTLINDEX=0," + "AES0=" $AES0 "," + "AES1=" $AES1 "," + "AES2=" $AES2 "," + "AES3=" $AES3 + ] + } +} + +HDA-Intel.pcm.hdmi.1 { + @args [ CARD AES0 AES1 AES2 AES3 ] + @args.CARD { type string } + @args.AES0 { type integer } + @args.AES1 { type integer } + @args.AES2 { type integer } + @args.AES3 { type integer } + @func refer + name { + @func concat + strings [ + "cards.HDA-Intel.pcm.hdmi.common:" + "CARD=" $CARD "," + "DEVICE=7," + "CTLINDEX=1," + "AES0=" $AES0 "," + "AES1=" $AES1 "," + "AES2=" $AES2 "," + "AES3=" $AES3 + ] + } +} + +HDA-Intel.pcm.hdmi.2 { + @args [ CARD AES0 AES1 AES2 AES3 ] + @args.CARD { type string } + @args.AES0 { type integer } + @args.AES1 { type integer } + @args.AES2 { type integer } + @args.AES3 { type integer } + @func refer + name { + @func concat + strings [ + "cards.HDA-Intel.pcm.hdmi.common:" + "CARD=" $CARD "," + "DEVICE=8," + "CTLINDEX=2," + "AES0=" $AES0 "," + "AES1=" $AES1 "," + "AES2=" $AES2 "," + "AES3=" $AES3 + ] + } +} + +HDA-Intel.pcm.hdmi.3 { + @args [ CARD AES0 AES1 AES2 AES3 ] + @args.CARD { type string } + @args.AES0 { type integer } + @args.AES1 { type integer } + @args.AES2 { type integer } + @args.AES3 { type integer } + @func refer + name { + @func concat + strings [ + "cards.HDA-Intel.pcm.hdmi.common:" + "CARD=" $CARD "," + "DEVICE=9," + "CTLINDEX=3," + "AES0=" $AES0 "," + "AES1=" $AES1 "," + "AES2=" $AES2 "," + "AES3=" $AES3 + ] + } } <confdir:pcm/modem.conf> -- 1.7.2

2 1

[alsa-devel] [PATCH] Fix missing stream for second ADC on Realtek ALC260 HDA codec
by Jonathan Woithe 09 Aug '10

09 Aug '10

Hi all I discovered tonight that ALSA no longer sets up a stream for the second ADC provided by the Realtek ALC260 HDA codec. At some point alc_build_pcms() started using stream_analog_alt_capture when constructing the second ADC stream, but patch_alc260() was never updated accordingly. I have no idea when this regression occurred. The trivial patch to patch_alc260() given below fixes the problem as far as I can tell. The patch is against 2.6.35. Signed-off-by: Jonathan Woithe <jwoithe(a)physics.adelaide.edu.au> --- linux-2.6.35-orig/sound/pci/hda/patch_realtek.c 2010-08-02 07:41:14.000000000 +0930 +++ linux-2.6.35/sound/pci/hda/patch_realtek.c 2010-08-08 00:06:19.670695899 +0930 @@ -6863,6 +6863,7 @@ spec->stream_analog_playback = &alc260_pcm_analog_playback; spec->stream_analog_capture = &alc260_pcm_analog_capture; + spec->stream_analog_alt_capture = &alc260_pcm_analog_capture; spec->stream_digital_playback = &alc260_pcm_digital_playback; spec->stream_digital_capture = &alc260_pcm_digital_capture;

2 1

[alsa-devel] ALC892 optical SPDIF not working
by Manuel Lauss 09 Aug '10

09 Aug '10

Hello, I have a Gigabyte 890GX-based board with an ALC892 codec. The optical SPDIF output does not work at all (i.e. no red light on the cable), and the kernel prints "ALSA hda_codec.c:407: Too many connections" messages whenever sound is played (analog works, but I need digital). Below are the contents of /proc/asound/card0/codec#0. Thanks, Manuel Lauss Codec: Realtek ALC892 Address: 0 Function Id: 0x1 Vendor Id: 0x10ec0892 Subsystem Id: 0x1458a102 Revision Id: 0x100302 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC892 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="ALC892 Digital", type="SPDIF", device=1 Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Switch", index=1, device=0 Control: name="Capture Volume", index=1, device=0 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x90 0x90] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Switch", index=0, device=0 Control: name="Capture Volume", index=0, device=0 Device: name="ALC892 Analog", type="Audio", device=0 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x9c 0x9c] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Surround Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Center Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=In, idx=0, ofs=0 Control: name="LFE Playback Switch", index=0, device=0 ControlAmp: chs=2, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x05 0x0b Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x11 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x99430140: [Fixed] SPDIF Out at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x10 Node 0x12 [Pin Complex] wcaps 0x400401: Stereo Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000003e: IN OUT HP Detect Trigger Pin Default 0x01014410: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0c Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01011412: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0d Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01016411: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0e Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01012414: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0x4 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Mic Boost", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003736: IN OUT Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19c50: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x5, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Front Mic Boost", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19c60: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x6, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003736: IN OUT Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x0181345f: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x5, Sequence = 0xf Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02214c20: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1c [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x593301f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x4005e601: [N/A] Line Out at Ext N/A Conn = Optical, Color = White DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x014b6130: [Jack] SPDIF Out at Ext Rear Conn = Comb, Color = Orange DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400681: Stereo Digital Pincap 0x00000024: IN Detect Pin Default 0x01cb7170: [Jack] SPDIF In at Ext Rear Conn = Comb, Color = Yellow DefAssociation = 0x7, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=24 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 12 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12 Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=1, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x25 0x0b -- To unsubscribe from this list: send the line "unsubscribe alsa-devel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

4 13

[alsa-devel] ASoC: Hiding unused CODEC mixer widgets in the machine driver
by Stuart Longland 08 Aug '10

08 Aug '10

Hi all, Work has continued on the TLV320AIC3204 CODEC driver, and there have been a number of fixes since the last patch was published. However, this CODEC is a rather complicated beast to drive, some may find the controls a little unweildy, and as such, I was wondering if the machine driver could be used to abstract this for a given target? It's no use abstracting this in the CODEC, because some may want to access the functionality I'm trying to hide. The CODEC we're using has three line inputs; which may be treated as either three mono differential inputs, or three stereo single-ended inputs. There are also a couple of common-mode sources that may be connected. The resistances connecting these is selectable; 10k, 20k or 40k... and as such, it's possible to do some hardware mixing of the sources inside the CODEC. At the moment I have each of the inputs to the ADC's PGA ("MICPGA"), with one control for each possible path... There are two ADCs, so two PGAs... and the inputs can be connected to either the negative or positive terminal of the PGA in many cases. That leads to a large number of controls (the following is from amixer): Simple mixer control 'Left MICPGA+ Output Mixer IN1L',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Left MICPGA+ Output Mixer IN1R',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Left MICPGA+ Output Mixer IN2L',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Left MICPGA+ Output Mixer IN3L',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: '10k' Simple mixer control 'Left MICPGA- Output Mixer CM1L',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Left MICPGA- Output Mixer CM2L',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Left MICPGA- Output Mixer IN2R',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Left MICPGA- Output Mixer IN3R',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: '10k' [...] Simple mixer control 'Right MICPGA+ Output Mixer IN1R',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: '10k' Simple mixer control 'Right MICPGA+ Output Mixer IN2L',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Right MICPGA+ Output Mixer IN2R',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Right MICPGA+ Output Mixer IN3R',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: '10k' Simple mixer control 'Right MICPGA- Output Mixer CM1R',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Right MICPGA- Output Mixer CM2R',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: 'not-connected' Simple mixer control 'Right MICPGA- Output Mixer IN1L',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: '10k' Simple mixer control 'Right MICPGA- Output Mixer IN3L',0 Capabilities: enum Items: 'not-connected' '10k' '20k' '40k' Item0: '10k' These controls are useful to a machine driver for implementing controls, but they're not that friendly to an end user. I was wondering if it was possible to hide these controls from the userland, but expose them to the machine driver to be presented to the user in a more meaningful manner. (i.e. we can have just simple mute switches for IN1 and IN3, labelling them "handset" and "internal mic" in our device). Or would I be better defining these controls in the machine driver? Regards, -- Stuart Longland (aka Redhatter, VK4MSL) .'''. Gentoo Linux/MIPS Cobalt and Docs Developer '.'` : . . . . . . . . . . . . . . . . . . . . . . .'.' http://dev.gentoo.org/~redhatter :.' I haven't lost my mind... ...it's backed up on a tape somewhere.

3 5

[alsa-devel] [PATCH 0/5] ASoC: Fix smdk64xx-wm8580 problems
by Seungwhan Youn 08 Aug '10

08 Aug '10

Hi, This patch serise fix some problems in smdk64xx board when it use I2S with wm8580. o ADC source clock setting is set to use MCLK, It makes that wm8580 cannot make BCLK and LRCLK for playback and capture. o When application set some sampling freq. - 8kHz, 11.025kHz, audio doesn't work correctly with broken sound. Because wm8580 always set BCLK_RATE and LRCLK_RATE as a default value , BCLK_RATE - 256fs and LRCLK_RATE - 64 BCLKs per LRCLK. So, BCLK_RATE and LRCLK_RATE setting on wm8580 is not match to make these sampling freq. on wm8580 master mode. So, to solve these problems, this patch apply followings: o Support ADC source clock setting on wm8580. o Enable to select BCLK_RATE and LRCLK_RATE value on wm8580. o Fix smdk-wm8580 machine code to support new features of wm8580. The following patch series contains: [PATCH 1/5] ASoC: wm8580: Add to support ADC clock source setting [PATCH 2/5] ASoC: S3C64XX: Add ADC source clock setting [PATCH 3/5] ASoC: wm8580: Fix Master Mode BCLK rates names [PATCH 4/5] ASoC: wm8580: Add to support Master Mode Rates [PATCH 5/5] ASoC: S3C64XX: Fix to support BCLK, LRCLK rates setting Thanks, Claude

4 18

[alsa-devel] mudita24 1.02 -- improved envy24control mixer/router for ice1712-based sound-cards
by Niels Mayer 08 Aug '10

08 Aug '10

The "Mudita24" package is a modification of alsa-tools' envy24control: an application controlling the digital mixer, channel gains and other hardware settings for sound cards based on the ice1712 chipset ( http://alsa.cybermirror.org/manuals/icensemble/envy24.pdf ). It also displays a level meter for each input and output channel and maintains peak level indicators. This utility is preferable to alsamixer(1) for those with ice1712-based cards: M-Audio Delta 1010, Delta 1010LT, Delta DiO 2496, Delta 66, Delta 44, Delta 410 and Audiophile 2496. TerraTec EWS 88MT, EWS 88D, EWX 24/96, DMX 6Fire, Phase 88. Hoontech SoundTrack DSP 24, SoundTrack DSP 24 Value, SoundTrack DSP 24 Media 7.1. Event Electronics EZ8. Digigram VX442. Lionstracs, Mediastaton. Terrasoniq TS 88. Partial support for Roland/Edirol DA-2496. Now available, version 1.02: source: http://nielsmayer.com/envy24control/mudita24-1.0.2.tar.gz binary: http://nielsmayer.com/envy24control/mudita24-1.0.2.x86_64.tgz patch: http://nielsmayer.com/envy24control/mudita24-envy24control-0.6-to-1.0.2.pat… 'envy24control' is part of the "alsa-tools" package. For example, under CCRMA's Fedora repos, it's part of alsa-tools-1.0.22-1.1.fc12.ccrma.x86_64. This "mudita24" package updates/replaces the alsa-tools /usr/bin/envy24control application. The default "./configure ; make ; sudo make install" process on the source-code leaves a binary in /usr/local/bin/envy24control and places the man-page in /usr/local/man/man1/envy24control.1 . This means you can still use the standard alsa-tools version in /usr/bin/envy24control . Screenshots (controlling either Terratec DMX6Fire or M-Audio Delta 66): http://nielsmayer.com/envy24control/Mudita24-102-Monitor-Inputs.png http://nielsmayer.com/envy24control/Mudita24-102-Monitor-Outputs.png http://nielsmayer.com/envy24control/Mudita24-102-Patchbay+Router.png http://nielsmayer.com/envy24control/Mudita24-102-Hardware-Settings.png http://nielsmayer.com/envy24control/Mudita24-102-Analog-Volume.png http://nielsmayer.com/envy24control/Mudita24-102-About.png Changes since recent 1.0.0 and 1.0.1 releases: * Peak-meter display is in dBFS, corresponding to displayed dBFS peak-meter value and scale-widget dB labeling. * Hardware mixer input attenuators provide more precise control to the 0 to -48dB range of adjustment, turning the associated input "off" when the slider is moved to bottom of the scale. External MIDI control of the hardware mixer via --midichannel and --midienhanced options unaffected by this change. * For M-Audio Delta series, add display of "Delta IEC958 Input Status" under "Hardware Settings." * Command line options --no_scale_mark, --channel_group_modulus affect layout and presence of dB markings for sliders. --channel_group_modulus allows override of Left/Right grouping of dB labels for multichannel applications. * Control of peak-meter coloring via --lights_color and --bg_color options. Reasonable default colors used when these options are not set. (1.0.1's use of Gtk skin to provide an automatic color choice didn't work out that well on some systems.) * Fixed command-line options --card and --device to allow valid ALSA card and CTL device names ( https://bugzilla.redhat.com/show_bug.cgi?id=602900 ). * Profiles created in ~/.envy24control and not "~/envy24control" ( http://bugtrack.alsa-project.org/alsa-bug/view.php?id=4738 ). Summary of previous updates from envy24control 0.6.0 (GIT HEAD) to "1.0.2": (1) Implemented "Peak Hold" functionality in meters; reimplemented meters to do away with inefficient "faux LED" peak-meter display. (2) Significantly reduced the number of timer interrupts generated by this program by slowing down all updates to 10 per second -- previously meters updated 25x/second! (3) All volumes are represented as decibels, including the 0 to -48dB range of the hardware peak-meters, the 0 -to- -48dB&off attenuation for all inputs to the digital mixer, the 0 -to- -63dB attenuation of the analog DAC, and the +18 -to- -63dB attenuation/amplification of the analog ADC. (4) All gtk "scale" widgets have dB legends; the "PageUp" "PageDown" keys allow rapid movement between the marked levels, and "UpArrow" and "DownArrow" allow fine-adjustment. Niels http://nielsmayer.com PS: Why "mudita24" ? An alternate name to avoid confusion with "envy24control 0.6.0" until changes in this version propagate upstream. See http://en.wikipedia.org/wiki/Envy#In_philosophy "In Buddhism the third of the four divine abidings is mudita, taking joy in the good fortune of another. This virtue is considered the antidote to envy and the opposite of schadenfreude."

2 1

[alsa-devel] [PATCH 1/6] ASoC: add ADAU1361 codec driver
by Mike Frysinger 08 Aug '10

08 Aug '10

From: Cliff Cai <cliff.cai(a)analog.com> Signed-off-by: Cliff Cai <cliff.cai(a)analog.com> Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/adau1361.c | 992 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/adau1361.h | 264 ++++++++++++ 4 files changed, 1262 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/adau1361.c create mode 100644 sound/soc/codecs/adau1361.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index ae01cba..f37d5f4 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -16,6 +16,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_AD193X if SND_SOC_I2C_AND_SPI select SND_SOC_AD1980 if SND_SOC_AC97_BUS select SND_SOC_AD73311 if I2C + select SND_SOC_ADAU1361 if I2C select SND_SOC_ADAV80X if SND_SOC_I2C_AND_SPI select SND_SOC_ADS117X select SND_SOC_AK4104 if SPI_MASTER @@ -104,6 +105,9 @@ config SND_SOC_AD1980 config SND_SOC_AD73311 tristate +config SND_SOC_ADAU1361 + tristate + config SND_SOC_ADAV80X tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f5b3d5b..d05b672 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -3,6 +3,7 @@ snd-soc-ad1836-objs := ad1836.o snd-soc-ad193x-objs := ad193x.o snd-soc-ad1980-objs := ad1980.o snd-soc-ad73311-objs := ad73311.o +snd-soc-adau1361-objs := adau1361.o snd-soc-adav80x-objs := adav80x.o snd-soc-ads117x-objs := ads117x.o snd-soc-ak4104-objs := ak4104.o @@ -70,6 +71,7 @@ obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o obj-$(CONFIG_SND_SOC_AD1980) += snd-soc-ad1980.o obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o +obj-$(CONFIG_SND_SOC_ADAU1361) += snd-soc-adau1361.o obj-$(CONFIG_SND_SOC_ADAV80X) += snd-soc-adav80x.o obj-$(CONFIG_SND_SOC_ADS117X) += snd-soc-ads117x.o obj-$(CONFIG_SND_SOC_AK4104) += snd-soc-ak4104.o diff --git a/sound/soc/codecs/adau1361.c b/sound/soc/codecs/adau1361.c new file mode 100644 index 0000000..ad78420 --- /dev/null +++ b/sound/soc/codecs/adau1361.c @@ -0,0 +1,992 @@ +/* + * Driver for ADAU1361 sound codec + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +#include <linux/sysfs.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> + +#include "adau1361.h" + +#define AUDIO_NAME "adau1361" +#define ADAU1361_VERSION "0.1" + +#define CAP_MIC 1 +#define CAP_LINE 2 +#define CAPTURE_SOURCE_NUMBER 2 + +struct snd_soc_codec_device soc_codec_dev_adau1361; +static struct snd_soc_codec *adau1361_codec; +/* codec private data */ +struct adau1361_priv { + unsigned int sysclk; + unsigned int in_source; + unsigned int out_route; + unsigned int pll_out; + struct work_struct resume_work; + struct snd_soc_codec codec; + int dapm_state_suspend; + struct platform_device *pdev; + u8 pll_enable; + u8 adau1361_pll_reg[6]; + u8 rate_index; + /* dapm */ + u8 dapm_lineL; + u8 dapm_lineR; + u8 dapm_hpL; + u8 dapm_hpR; +}; + +/* + * write register cache + */ +static inline int adau1361_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + u8 *cache = codec->reg_cache; + + if (reg < ADAU_FIRSTREG) + reg = reg + ADAU_FIRSTREG; + + if ((reg < ADAU_FIRSTREG) || (reg > ADAU_LASTREG)) + return -1; + + cache[reg - ADAU_FIRSTREG] = value; + + return 0; +} + +/* + * read a multi-byte ADAU1361 register (6byte pll reg) + */ +static int adau1361_read_reg_block(struct snd_soc_codec *codec, + unsigned int reg, u8 len) +{ + u8 buf[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; + u8 addr[2]; + unsigned int i; + + if (reg < ADAU_FIRSTREG) + reg = reg + ADAU_FIRSTREG; + + if ((reg < ADAU_FIRSTREG) || (reg > ADAU_LASTREG)) + return -EIO; + + addr[0] = (u8)(reg >> 8); + addr[1] = (u8)(reg & 0xFF); + + /* write the 2byte read address */ + if (codec->hw_write(codec->control_data, addr, 2) != 2) { + dev_err(codec->dev, "read_reg_byte:address write failed."); + return -EIO; + } + + if (i2c_master_recv(codec->control_data, buf, len) != len) + return -EIO; + + for (i = 0; i < len; i++) + adau1361_write_reg_cache(codec, reg+i, (unsigned int)buf[i]); + + return 0; +} + +/* + * write a multibyte ADAU1361 register (6byte pll reg) + */ +static int adau1361_write_reg_block(struct snd_soc_codec *codec, + unsigned int reg, u8 length, u8 *values) +{ + int count = length + 2; /*data plus 16bit register address*/ + u8 buf[8] = {0, 0, 0, 0, 0, 0, 0, 0}; + + buf[0] = (u8)(reg >> 8); + buf[1] = (u8)(reg & 0xFF); + + if (length > 0) + memcpy(&buf[2], values, length); + + if (codec->hw_write(codec->control_data, buf, count) == count) + return 0; + else { + dev_err(codec->dev, "address block write failed."); + return -EIO; + } +} + +/* + * adau1361 controls + */ +static int adau1361_mux_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct adau1361_priv *adau1361 = codec->private_data; + + if (adau1361->in_source & CAP_MIC) + ucontrol->value.integer.value[0] = 0x0; + else + ucontrol->value.integer.value[0] = 0x1; + + return 0; +} + +static int adau1361_mux_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct adau1361_priv *adau1361 = codec->private_data; + int src = ucontrol->value.integer.value[0]; + u8 regvalue = 0; + + if (src == 0) {/* Select Mic */ + adau1361->in_source = CAP_MIC; +#ifdef ADAU1361_DIG_MIC + regvalue = (snd_soc_read(codec, ADAU_ADCCTL0) & 0xFB)|0x4; + snd_soc_write(codec, ADAU_ADCCTL0, regvalue); +#else + snd_soc_write(codec, ADAU_RECMBIA, RECMBIA_DISABLE); + regvalue = (snd_soc_read(codec, ADAU_RECVLCL) + | RECVLC_ENABLE_MASK); + snd_soc_write(codec, ADAU_RECVLCL, regvalue); + regvalue = (snd_soc_read(codec, ADAU_RECVLCR) + | RECVLC_ENABLE_MASK); + snd_soc_write(codec, ADAU_RECVLCR, regvalue); + snd_soc_write(codec, ADAU_RECMLC1, RECMLC_MIC_0DB); + snd_soc_write(codec, ADAU_RECMRC1, RECMLC_MIC_0DB); +#endif + } else if (src == 1) {/* Select Line */ + adau1361->in_source = CAP_LINE; +#ifdef ADAU1361_DIG_MIC + regvalue = (snd_soc_read(codec, ADAU_ADCCTL0) & 0xFB); + snd_soc_write(codec, ADAU_ADCCTL0, regvalue); +#endif + snd_soc_write(codec, ADAU_RECMBIA, RECMBIA_DISABLE); + regvalue = (snd_soc_read(codec, ADAU_RECVLCL) + & RECVLC_DISABLE_MASK); + snd_soc_write(codec, ADAU_RECVLCL, regvalue); + regvalue = (snd_soc_read(codec, ADAU_RECVLCR) + & RECVLC_DISABLE_MASK); + snd_soc_write(codec, ADAU_RECVLCR, regvalue); + snd_soc_write(codec, ADAU_RECMLC1, RECMLC_LINE_0DB); + snd_soc_write(codec, ADAU_RECMRC1, RECMLC_LINE_0DB); + } + + return 0; +} + +static int adau1361_mic_boost_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct adau1361_priv *adau1361 = codec->private_data; + + if (adau1361->in_source & CAP_MIC) + ucontrol->value.integer.value[0] = + (RECMLC_MIC_20DB == + snd_soc_read(codec, ADAU_RECMLC1)); + else + ucontrol->value.integer.value[0] = 0x0; + + ucontrol->value.integer.value[1] = ucontrol->value.integer.value[0]; + + return 0; +} + +static int adau1361_mic_boost_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct adau1361_priv *adau1361 = codec->private_data; + int val = ucontrol->value.integer.value[0]; + u8 regvalue = 0; + + if (adau1361->in_source & CAP_MIC) { + regvalue = (val) ? RECMLC_MIC_20DB : RECMLC_MIC_0DB; + if (snd_soc_read(codec, ADAU_RECMLC1) != regvalue) { + snd_soc_write(codec, ADAU_RECMLC1, regvalue); + snd_soc_write(codec, ADAU_RECMRC1, regvalue); + return 1; + } + } + + return 0; +} + +static const char *adau1361_input_select[] = {"Mic", "Line"}; +static const struct soc_enum adau1361_enums[] = { + SOC_ENUM_SINGLE(ADAU_RECMLC1, 0, 2, adau1361_input_select), +}; + +static const struct snd_kcontrol_new adau1361_snd_controls[] = { +SOC_DOUBLE_R("Master Playback Volume", ADAU_DACCTL1, + ADAU_DACCTL2, 0, 255, 1), +SOC_DOUBLE_R("Capture Volume", ADAU_ADCCTL1, + ADAU_ADCCTL2, 0, 255, 1), +SOC_DOUBLE_R("Capture Switch", ADAU_RECMLC0, + ADAU_RECMRC0, 0, 1, 0), +SOC_ENUM_EXT("Capture Source", adau1361_enums[0], + adau1361_mux_get, adau1361_mux_put), +SOC_SINGLE_EXT("Mic Boost (+20dB)", ADAU_RECMLC1, 0, 1, 0, + adau1361_mic_boost_get, adau1361_mic_boost_put), +SOC_DOUBLE_R("Headphone Playback Volume", ADAU_PLBHPVL, + ADAU_PLBHPVR, 2, 63, 0), +SOC_DOUBLE_R("Line Playback Volume", ADAU_PLBLOVL, + ADAU_PLBLOVR, 2, 63, 0), +}; + +/* + * _DAPM_ + */ + +static int adau1361_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u8 reg = 0; + + if (mute) { + /* mute inputs */ + reg = (snd_soc_read(codec, ADAU_RECMLC0) & 0xFE) | 0x0; + snd_soc_write(codec, ADAU_RECMLC0, reg); + reg = (snd_soc_read(codec, ADAU_RECMRC0) & 0xFE) | 0x0; + snd_soc_write(codec, ADAU_RECMRC0, reg); + /* mute outputs */ + reg = (snd_soc_read(codec, ADAU_PLBMLC0) & 0xFE) | 0x1; + snd_soc_write(codec, ADAU_PLBMLC0, reg); + reg = (snd_soc_read(codec, ADAU_PLBMRC0) & 0xFE) | 0x1; + snd_soc_write(codec, ADAU_PLBMRC0, reg); + + } else { + /* un-mute outputs, according to the spec, + we should enable mixer3 and mixer4 here, + but it seems that things are converse here. + */ + reg = (snd_soc_read(codec, ADAU_PLBMLC0) & 0xFE) | 0x0; + snd_soc_write(codec, ADAU_PLBMLC0, reg); + reg = (snd_soc_read(codec, ADAU_PLBMRC0) & 0xFE) | 0x0; + snd_soc_write(codec, ADAU_PLBMRC0, reg); + /* un-mute inputs */ + reg = (snd_soc_read(codec, ADAU_RECMLC0) & 0xFE) | 0x1; + snd_soc_write(codec, ADAU_RECMLC0, reg); + reg = (snd_soc_read(codec, ADAU_RECMRC0) & 0xFE) | 0x1; + snd_soc_write(codec, ADAU_RECMRC0, reg); + } + + return 0; +} + +/* Left Mixer */ +static const struct snd_kcontrol_new adau1361_left_mixer_controls[] = { +SOC_DAPM_SINGLE("LineLeft Bypass Switch", ADAU_PLBLOVL, 1, 1, 0), +SOC_DAPM_SINGLE("HPLeft Bypass Switch", ADAU_PLBHPVL, 1, 1, 0), +}; + +/* Right mixer */ +static const struct snd_kcontrol_new adau1361_right_mixer_controls[] = { +SOC_DAPM_SINGLE("LineRight Bypass Switch", ADAU_PLBLOVR, 1, 1, 0), +SOC_DAPM_SINGLE("HPRight Bypass Switch", ADAU_PLBHPVR, 1, 1, 0), +}; + +static const struct snd_soc_dapm_widget adau1361_dapm_widgets[] = { + +SND_SOC_DAPM_MIXER("Left Mixer", ADAU_PLBPWRM, 2, 1, \ + &adau1361_left_mixer_controls[0], ARRAY_SIZE(adau1361_left_mixer_controls)), +SND_SOC_DAPM_MIXER("Left Out", ADAU_PLBPWRM, 0, 0, NULL, 0), +SND_SOC_DAPM_MIXER("Left Line Mixer", ADAU_PLBMLLO, 0, 0, NULL, 0), +SND_SOC_DAPM_OUTPUT("LOUT"), +SND_SOC_DAPM_OUTPUT("LHPOUT"), + +SND_SOC_DAPM_MIXER("Right Mixer", ADAU_PLBPWRM, 3, 1, \ + &adau1361_right_mixer_controls[0], ARRAY_SIZE(adau1361_right_mixer_controls)), +SND_SOC_DAPM_MIXER("Right Out", ADAU_PLBPWRM, 1, 0, NULL, 0), +SND_SOC_DAPM_MIXER("Right Line Mixer", ADAU_PLBMRLO, 0, 0, NULL, 0), +SND_SOC_DAPM_OUTPUT("ROUT"), +SND_SOC_DAPM_OUTPUT("RHPOUT"), + +SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_MIXER("DAC Enable Left", ADAU_DACCTL0, 0, 0, NULL, 0), +SND_SOC_DAPM_MIXER("DAC Enable Right", ADAU_DACCTL0, 1, 0, NULL, 0), +SND_SOC_DAPM_MIXER("HP Bias Left", ADAU_PLBPWRM, 6, 1, NULL, 0), +SND_SOC_DAPM_MIXER("HP Bias Right", ADAU_PLBLRMC, 0, 0, NULL, 0), + +SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_MIXER("ADC Left", ADAU_ADCCTL0, 0, 0, NULL, 0), +SND_SOC_DAPM_MIXER("ADC Right", ADAU_ADCCTL0, 1, 0, NULL, 0), + +#if !defined(ADAU1361_DIG_MIC) +SND_SOC_DAPM_MICBIAS("Mic Bias", ADAU_RECMBIA, 0, 0), +SND_SOC_DAPM_MIXER("Left Mic Mixer", ADAU_RECVLCL, 0, 0, NULL, 0), +SND_SOC_DAPM_MIXER("Right Mic Mixer", ADAU_RECVLCR, 0, 0, NULL, 0), +#else +SND_SOC_DAPM_MICBIAS("Mic Bias Left", SND_SOC_NOPM, 1, 0), +SND_SOC_DAPM_MICBIAS("Mic Bias Right", SND_SOC_NOPM, 1, 0), +SND_SOC_DAPM_MIXER("Left Mic Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_MIXER("Right Mic Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), +#endif + +SND_SOC_DAPM_MIXER("Left Input", ADAU_RECPWRM, 1, 1, NULL, 0), +SND_SOC_DAPM_MIXER("Right Input", ADAU_RECPWRM, 2, 1, NULL, 0), + +SND_SOC_DAPM_INPUT("LMICIN"), +SND_SOC_DAPM_INPUT("RMICIN"), +SND_SOC_DAPM_INPUT("LLINEIN"), +SND_SOC_DAPM_INPUT("RLINEIN"), +}; + +static const struct snd_soc_dapm_route audio_conns[] = { + /* DAC */ + {"DAC Enable Left", NULL, "DAC"}, + {"DAC Enable Right", NULL, "DAC"}, + + /* mixers */ + {"Left Mixer", NULL, "DAC Enable Left"}, + {"Right Mixer", NULL, "DAC Enable Right"}, + + /* outputs */ + {"Left Out", NULL, "Left Mixer"}, + {"Right Out", NULL, "Right Mixer"}, + + /* line Out */ + {"Left Line Mixer", NULL, "Left Out"}, + {"Right Line Mixer", NULL, "Right Out"}, + {"LOUT", "LineLeft Bypass Switch", "Left Line Mixer"}, + {"ROUT", "LineRight Bypass Switch", "Right Line Mixer"}, + + /* headphone out */ + {"HP Bias Left", NULL, "Left Out"}, + {"HP Bias Right", NULL, "Right Out"}, + {"LHPOUT", "HPLeft Bypass Switch", "HP Bias Left"}, + {"RHPOUT", "HPRight Bypass Switch", "HP Bias Right"}, + + /* inputs */ + {"Left Input", NULL, "LLINEIN"}, + {"Right Input", NULL, "RLINEIN"}, + {"ADC Left", NULL, "Left Input"}, + {"ADC Right", NULL, "Right Input"}, + {"ADC Left", NULL, "Left Mic Mixer"}, + {"ADC Right", NULL, "Right Mic Mixer"}, + {"ADC", NULL, "ADC Left"}, + {"ADC", NULL, "ADC Right"}, + +}; + +static int adau1361_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, adau1361_dapm_widgets, + ARRAY_SIZE(adau1361_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_conns, ARRAY_SIZE(audio_conns)); + + return 0; +} + +/* PLL dividors */ +struct _pll_div { + u32 mclk; + u32 pll_freq; + u16 den; + u16 num; + u8 param; +}; + +static const struct _pll_div clock_dividers[] = { + { 12000000, 45158400, 625, 477, /*44.1kHz*/ + (PLLCTRL_INTPART_R3|PLLCTRL_INPUT_DIV1|PLLCTRL_TYPE_FRAC) }, + {12000000, 49152000, 125, 12, /*48kHz*/ + (PLLCTRL_INTPART_R4|PLLCTRL_INPUT_DIV1|PLLCTRL_TYPE_FRAC) }, + {12288000, 45158400, 40, 27, /*44.1Khz*/ + (PLLCTRL_INTPART_R3|PLLCTRL_INPUT_DIV1|PLLCTRL_TYPE_FRAC) }, + {12288000, 49152000, 0, 0, /*48kHz*/ + (PLLCTRL_INTPART_R4|PLLCTRL_INPUT_DIV1|PLLCTRL_TYPE_INT) }, +}; + +static inline int get_pll_settings(int mclk, int pll_out) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(clock_dividers); i++) { + if (clock_dividers[i].mclk == mclk + && clock_dividers[i].pll_freq == pll_out) + return i; + } + return 0; +} + +static int adau1361_pll_init(struct snd_soc_codec *codec) +{ + struct adau1361_priv *adau1361 = codec->private_data; + u8 *pll_reg = adau1361->adau1361_pll_reg; + int ix = 0; + + /* Init ADAU1361 clocking */ + snd_soc_write(codec, ADAU_CLKCTRL, + (CLKCTRL_SRC_PLL | CLKCTRL_FRQ_1024 | CLKCTRL_DISABLE)); + + ix = get_pll_settings(adau1361->sysclk, adau1361->pll_out); + + pll_reg[0] = (clock_dividers[ix].den >> 8); + pll_reg[1] = (clock_dividers[ix].den & 0xFF); + pll_reg[2] = (clock_dividers[ix].num >> 8); + pll_reg[3] = (clock_dividers[ix].num & 0xFF); + pll_reg[4] = clock_dividers[ix].param; + pll_reg[5] = PLLCTRL_DISABLE; + adau1361_write_reg_block(codec, ADAU_PLLCTRL, 6, pll_reg); + + adau1361->pll_enable = 0; + + return 0; +} + +static int adau1361_pll_enable(struct snd_soc_codec *codec, int enable) +{ + struct adau1361_priv *adau1361 = codec->private_data; + u8 *pll_reg = adau1361->adau1361_pll_reg; + int counter = 0; + + if (enable) { + pll_reg[5] = PLLCTRL_ENABLE; + adau1361_write_reg_block(codec, ADAU_PLLCTRL, 6, pll_reg); + + /* wait for PLL lock*/ + do { + ++counter; + schedule_timeout_interruptible(msecs_to_jiffies(1)); + adau1361_read_reg_block(codec, ADAU_PLLCTRL, 6); + } while (0 == (snd_soc_read(codec, ADAU_PLLCTRL + 5) & 0x2) + && counter < 20); + if (counter >= 20) + return -1; + + adau1361->pll_enable = 1; + + /* Init ADAU1361 clocking */ + snd_soc_write(codec, ADAU_CLKCTRL, + (CLKCTRL_SRC_PLL | CLKCTRL_FRQ_1024 | CLKCTRL_ENABLE)); + } + + return 0; + +} + +static int adau1361_reg_init(struct snd_soc_codec *codec) +{ + struct adau1361_mode_register regdata; + struct adau1361_mode_register *registers = 0; + int i; +#ifdef ADAU1361_DIG_MIC + int mode = 1; +#else /* analog mic */ + int mode = 0; +#endif + adau1361_pll_init(codec); + adau1361_pll_enable(codec, 1); + /* Load deault regsiter settings */ + for (i = 0; i < RESET_REGISTER_COUNT; ++i) { + regdata = adau1361_reset[i]; + snd_soc_write(codec, regdata.regaddress, regdata.regvalue); + } + /* Load mode registers */ + registers = adau1361_mode_registers[mode]; + for (i = 0; i < MODE_REGISTER_COUNT; ++i) { + regdata = registers[i]; + snd_soc_write(codec, regdata.regaddress, regdata.regvalue); + } + /* unmute outputs */ + snd_soc_write(codec, ADAU_PLBHPVL, DAPM_HP_DEF); + snd_soc_write(codec, ADAU_PLBHPVR, DAPM_HP_DEF); + snd_soc_write(codec, ADAU_PLBLOVL, DAPM_LINE_DEF); + snd_soc_write(codec, ADAU_PLBLOVR, DAPM_LINE_DEF); + + return 0; +} + +struct _srate_set { + int fs; + u8 reg; +}; + +static const struct _srate_set srate_iface[] = { + {8000, 0x1}, + {11025, 0x2}, + {12000, 0x2}, + {16000, 0x3}, + {22050, 0x4}, + {24000, 0x4}, + {32000, 0x5}, + {44100, 0x0}, + {48000, 0x0}, + {88200, 0x6}, + {96000, 0x6}, +}; + +static int adau1361_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + struct adau1361_priv *adau1361 = codec->private_data; + int rate = params_rate(params); + int i; + + /* initialize the PLL */ + if (adau1361_pll_init(codec) != 0) + return -EINVAL; + for (i = 0; i < ARRAY_SIZE(srate_iface); i++) { + if (srate_iface[i].fs == rate) { + adau1361->rate_index = i; + break; + } + } + return 0; +} + +static int adau1361_pcm_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + struct adau1361_priv *adau1361 = codec->private_data; + u8 reg = 0; + int ret = 0; + + reg = srate_iface[adau1361->rate_index].reg; + ret = adau1361_pll_enable(codec, 1); + if (ret) + dev_err(codec->dev, "Failed to initialize PLL"); + + reg = (snd_soc_read(codec, ADAU_CONVCT0) & 0xF8) | reg; + snd_soc_write(codec, ADAU_CONVCT0, reg); + + return ret; +} + +static void adau1361_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + u8 reg; + + if (!codec->active) { + reg = snd_soc_read(codec, ADAU_CLKCTRL); + snd_soc_write(codec, ADAU_CLKCTRL, reg & ~0x1); + } +} + +static int adau1361_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u8 reg = 0; + + /* set master/slave audio interface */ + reg = (snd_soc_read(codec, ADAU_SPRTCT0) & 0xFE); + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: /*master*/ + reg |= 0x1; + break; + case SND_SOC_DAIFMT_CBS_CFS: /*slave*/ + reg &= ~0x1; + break; + default: + return 0; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + /* TODO: support TDM */ + default: + return 0; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + /* TODO: support signal inversions */ + default: + return 0; + } + + /* set I2S iface format*/ + snd_soc_write(codec, ADAU_SPRTCT0, reg); + return 0; +} + +/* + * Clock after PLL and dividers + */ +static int adau1361_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct adau1361_priv *adau1361 = codec->private_data; + + switch (freq) { + case 12000000: + adau1361->sysclk = freq; + return 0; + case 12288000: + adau1361->sysclk = freq; + return 0; + } + + /* supported 12MHz MCLK only for now */ + return -EINVAL; +} + +static int adau1361_set_dai_pll(struct snd_soc_dai *codec_dai, + int pll_id, int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct adau1361_priv *adau1361 = codec->private_data; + + /* fixed MCLK only supported for now */ + if (adau1361->sysclk != freq_in) + return -EINVAL; + + /* Only update pll when freq changes */ + if (adau1361->pll_enable && adau1361->pll_out == freq_out) + return 0; + + switch (freq_out) { + case 45158400: + adau1361->pll_out = freq_out; + break; + case 49152000: + adau1361->pll_out = freq_out; + break; + default: + dev_err(codec->dev, "adau1361_set_dai_pll: undefined pll freq:%d", freq_out); + return -EINVAL; + } + + return 0; +} + + +static int adau1361_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + + switch (level) { + case SND_SOC_BIAS_ON: + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + snd_soc_write(codec, ADAU_CLKCTRL, + (CLKCTRL_SRC_PLL | CLKCTRL_FRQ_1024 | CLKCTRL_DISABLE)); + break; + case SND_SOC_BIAS_OFF: + /* everything off, dac mute, inactive */ + snd_soc_write(codec, ADAU_RECPWRM, RECPWRM_LOW_PWR); + snd_soc_write(codec, ADAU_PLBPWRM, PLBPWRM_LOW_PWR); + snd_soc_write(codec, ADAU_PLBCTRL, PLBCTRL_POP_OFF); + snd_soc_write(codec, ADAU_CLKCTRL, + (CLKCTRL_SRC_PLL | CLKCTRL_FRQ_1024 | CLKCTRL_DISABLE)); + break; + + } + codec->bias_level = level; + return 0; +} + +#define ADAU1361_RATES (SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_22050 |\ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_88200 |\ + SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000 |\ + SNDRV_PCM_RATE_96000) + +#define ADAU1361_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops adau1361_dai_ops = { + .hw_params = adau1361_hw_params, + .prepare = adau1361_pcm_prepare, + .shutdown = adau1361_shutdown, + .digital_mute = adau1361_mute, + .set_fmt = adau1361_set_dai_fmt, + .set_sysclk = adau1361_set_dai_sysclk, + .set_pll = adau1361_set_dai_pll, +}; + +struct snd_soc_dai adau1361_dai = { + .name = "ADAU1361", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = ADAU1361_RATES, + .formats = ADAU1361_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = ADAU1361_RATES, + .formats = ADAU1361_FORMATS, + }, + .ops = &adau1361_dai_ops, +}; +EXPORT_SYMBOL_GPL(adau1361_dai); + +static int adau1361_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + adau1361_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static void adau1361_resume_wq_handler(struct work_struct *work) +{ + struct adau1361_priv *adau1361 = container_of(work, struct adau1361_priv, resume_work); + struct snd_soc_codec *codec = &adau1361->codec; + unsigned int i, v; + + adau1361_pll_init(codec); + adau1361_pll_enable(codec, 1); + + /* sync reg_cache with the hardware */ + for (i = ADAU_FIRSTREG; i <= ADAU_LASTREG; ++i) { + /* skip over the 6byte PLL control register */ + if (i >= ADAU_PLLCTRL && i < ADAU_MICCTRL) + continue; + + v = snd_soc_read(codec, i); + if (snd_soc_write(codec, i, v) != 0) { + dev_err(codec->dev, "ERROR WRITING %.4X AT REG %x\n", v, i); + return; + } + } + + snd_soc_write(codec, ADAU_PLBCTRL, PLBCTRL_POP_ON); + snd_soc_write(codec, ADAU_RECPWRM, RECPWRM_RUN_PWR); + snd_soc_write(codec, ADAU_PLBPWRM, PLBPWRM_RUN_PWR); + + adau1361_set_bias_level(codec, SND_SOC_BIAS_ON); + +} + +static int adau1361_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + struct adau1361_priv *adau1361 = codec->private_data; + + adau1361->pdev = pdev; + schedule_work(&adau1361->resume_work); + return 0; +} + +/* + * initialise the adau1361 driver + * register the mixer and dsp interfaces with the kernel + */ +static int adau1361_register(struct adau1361_priv *adau1361, enum snd_soc_control_type control) +{ + struct snd_soc_codec *codec = &adau1361->codec; + int ret = 0; + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + codec->name = "adau1361"; + codec->owner = THIS_MODULE; + codec->set_bias_level = adau1361_set_bias_level; + codec->dai = &adau1361_dai; + codec->num_dai = 1; + codec->reg_cache_size = ADAU_NUMCACHEREG; + codec->reg_cache = kzalloc(ADAU_NUMCACHEREG, GFP_KERNEL); + if (codec->reg_cache == NULL) + return -ENOMEM; + + ret = snd_soc_codec_set_cache_io(codec, 16, 8, control); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&adau1361_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } + + return ret; +} + +static void adau1361_unregister(struct adau1361_priv *adau1361) +{ + struct snd_soc_codec *codec = &adau1361->codec; + + adau1361_set_bias_level(codec, SND_SOC_BIAS_OFF); + kfree(codec->reg_cache); + snd_soc_unregister_dai(&adau1361_dai); + snd_soc_unregister_codec(codec); + kfree(adau1361); + adau1361_codec = NULL; +} + +static int adau1361_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + struct adau1361_priv *adau1361; + int ret = 0; + + socdev->card->codec = adau1361_codec; + codec = adau1361_codec; + adau1361 = codec->private_data; + adau1361->in_source = CAP_MIC; /*default is mic input*/ + adau1361->sysclk = ADAU1361_MCLK_RATE; + adau1361->pll_out = ADAU1361_PLL_FREQ_48; + adau1361->dapm_lineL = DAPM_LINE_DEF; + adau1361->dapm_lineR = DAPM_LINE_DEF; + adau1361->dapm_hpL = DAPM_HP_DEF; + adau1361->dapm_hpR = DAPM_HP_DEF; + adau1361->pdev = pdev; + + ret = adau1361_reg_init(codec); + if (ret < 0) + dev_err(codec->dev, "failed to initialize\n"); + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + snd_soc_add_controls(codec, adau1361_snd_controls, + ARRAY_SIZE(adau1361_snd_controls)); + adau1361_add_widgets(codec); +pcm_err: + return ret; +} + +/* remove everything here */ +static int adau1361_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_adau1361 = { + .probe = adau1361_probe, + .remove = adau1361_remove, + .suspend = adau1361_suspend, + .resume = adau1361_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_adau1361); + + +static __devinit int adau1361_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct adau1361_priv *adau1361; + struct snd_soc_codec *codec; + int ret = 0; + + adau1361 = kzalloc(sizeof(struct adau1361_priv), GFP_KERNEL); + if (adau1361 == NULL) + return -ENOMEM; + codec = &adau1361->codec; + codec->private_data = adau1361; + codec->hw_write = (hw_write_t)i2c_master_send; + + i2c_set_clientdata(i2c, adau1361); + codec->control_data = i2c; + + codec->dev = &i2c->dev; + adau1361_codec = codec; + + INIT_WORK(&adau1361->resume_work, adau1361_resume_wq_handler); + ret = adau1361_register(adau1361, SND_SOC_I2C); + if (ret < 0) + dev_err(&i2c->dev, "failed to initialize\n"); + + return ret; +} + +static __devexit int adau1361_i2c_remove(struct i2c_client *client) +{ + struct adau1361_priv *adau1361 = i2c_get_clientdata(client); + adau1361_unregister(adau1361); + return 0; +} + +static const struct i2c_device_id adau1361_i2c_id[] = { + { "adau1361", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adau1361_i2c_id); + +/* corgi i2c codec control layer */ +static struct i2c_driver adau1361_i2c_driver = { + .driver = { + .name = "adau1361", + .owner = THIS_MODULE, + }, + .probe = adau1361_i2c_probe, + .remove = __devexit_p(adau1361_i2c_remove), + .id_table = adau1361_i2c_id, +}; + +static int __init adau1361_modinit(void) +{ + int ret; + + ret = i2c_add_driver(&adau1361_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register adau1361 I2C driver: %d\n", + ret); + } + + return ret; +} +module_init(adau1361_modinit); + +static void __exit adau1361_exit(void) +{ + i2c_del_driver(&adau1361_i2c_driver); +} +module_exit(adau1361_exit); + +MODULE_DESCRIPTION("ASoC ADAU1361 driver"); +MODULE_AUTHOR("Cliff Cai"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/adau1361.h b/sound/soc/codecs/adau1361.h new file mode 100644 index 0000000..79cf576 --- /dev/null +++ b/sound/soc/codecs/adau1361.h @@ -0,0 +1,264 @@ +/* + * header file fortone adau1361 sound chip + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + + +#ifndef __ADAU1361_H__ +#define __ADAU1361_H__ + +struct adau1361_setup_data { + unsigned short i2c_bus; + unsigned short i2c_address; +}; + +struct adau1361_mode_register { + u16 regaddress; + u16 regvalue; +}; + +#define RESET_REGISTER_COUNT 42 +#define MODE_REGISTER_COUNT 8 + +#define MASTER_MODE 1 +#ifdef MASTER_MODE +/* IIS mater mode*/ +#define ADAU_SRPT_CTRL0 0x01 +#else +/* IIS slave mode*/ +#define ADAU_SRPT_CTRL0 0x00 +#endif + +/* adau1361_set_dai_sysclk clk_id */ +#define ADAU1361_MCLK_ID 0 +#define ADAU1361_BCLK_ID 0x33 + +#define ADAU1361_MCLK_RATE 12288000 + +#define ADAU1361_PLL_FREQ_441 45158400 +#define ADAU1361_PLL_FREQ_48 49152000 + + +/* ADAU1361 control registers */ +#define ADAU_FIRSTREG 0x4000 + +#define ADAU_CLKCTRL 0x4000 +#define ADAU_PLLCTRL 0x4002 +#define ADAU_MICCTRL 0x4008 +#define ADAU_RECPWRM 0x4009 +#define ADAU_RECMLC0 0x400A +#define ADAU_RECMLC1 0x400B +#define ADAU_RECMRC0 0x400C +#define ADAU_RECMRC1 0x400D +#define ADAU_RECVLCL 0x400E +#define ADAU_RECVLCR 0x400F + +#define ADAU_RECMBIA 0x4010 +#define ADAU_ALCCTR0 0x4011 +#define ADAU_ALCCTR1 0x4012 +#define ADAU_ALCCTR2 0x4013 +#define ADAU_ALCCTR3 0x4014 +#define ADAU_SPRTCT0 0x4015 +#define ADAU_SPRTCT1 0x4016 +#define ADAU_CONVCT0 0x4017 +#define ADAU_CONVCT1 0x4018 +#define ADAU_ADCCTL0 0x4019 +#define ADAU_ADCCTL1 0x401A +#define ADAU_ADCCTL2 0x401B +#define ADAU_PLBMLC0 0x401C +#define ADAU_PLBMLC1 0x401D +#define ADAU_PLBMRC0 0x401E +#define ADAU_PLBMRC1 0x401F + +#define ADAU_PLBMLLO 0x4020 +#define ADAU_PLBMRLO 0x4021 +#define ADAU_PLBLRMC 0x4022 +#define ADAU_PLBHPVL 0x4023 +#define ADAU_PLBHPVR 0x4024 +#define ADAU_PLBLOVL 0x4025 +#define ADAU_PLBLOVR 0x4026 +#define ADAU_PLBMNOC 0x4027 +#define ADAU_PLBCTRL 0x4028 +#define ADAU_PLBPWRM 0x4029 + +#define ADAU_DACCTL0 0x402A +#define ADAU_DACCTL1 0x402B +#define ADAU_DACCTL2 0x402C +#define ADAU_SERPAD0 0x402D +#define ADAU_COMPAD0 0x402F +#define ADAU_COMPAD1 0x4030 +#define ADAU_MCLKPAD 0x4031 + +#define ADAU_LASTREG 0x4031 + +#define ADAU_NUMCACHEREG 44 + +/* Register field definitions */ +/* Clock Control */ +#define CLKCTRL_SRC_MCLK 0x0 +#define CLKCTRL_SRC_PLL 0x8 +#define CLKCTRL_FRQ_256 0x0 +#define CLKCTRL_FRQ_512 0x2 +#define CLKCTRL_FRQ_768 0x4 +#define CLKCTRL_FRQ_1024 0x6 +#define CLKCTRL_DISABLE 0x0 +#define CLKCTRL_ENABLE 0x1 + +/* PLL Control -- 6 bytes*/ +/*Bytes 5-6*/ +#define PLLCTRL_DEN_MSB 0x00 +#define PLLCTRL_DEN_LSB 0x00 +/*Bytes 3-4*/ +#define PLLCTRL_NUM_MSB 0x00 +#define PLLCTRL_NUM_LSB 0x00 +/*Byte 2*/ +#define PLLCTRL_INTPART_R2 0x10 +#define PLLCTRL_INTPART_R3 0x18 +#define PLLCTRL_INTPART_R4 0x20 +#define PLLCTRL_INTPART_R5 0x28 +#define PLLCTRL_INTPART_R6 0x30 +#define PLLCTRL_INTPART_R7 0x38 +#define PLLCTRL_INTPART_R8 0x40 +#define PLLCTRL_INPUT_DIV1 0x00 +#define PLLCTRL_INPUT_DIV2 0x02 +#define PLLCTRL_INPUT_DIV3 0x04 +#define PLLCTRL_INPUT_DIV4 0x06 +#define PLLCTRL_TYPE_INT 0x0 +#define PLLCTRL_TYPE_FRAC 0x1 +/*Byte 1*/ +#define PLLCTRL_DISABLE 0x0 +#define PLLCTRL_ENABLE 0x1 + +/*ADC*/ +#define ADCCTL_DISABLE_MASK 0xFC +#define ADCCTL_ENABLE_MASK 0x03 + +/*MIC*/ +#define RECMBIA_DISABLE 0x00 +#define RECMBIA_ENABLE 0x01 +#define RECVLC_DISABLE_MASK 0xFC +#define RECVLC_ENABLE_MASK 0x03 + +#define RECMLC_MIC_0DB 0x08 +#define RECMLC_MIC_20DB 0x10 +#define RECMLC_LINE_0DB 0x05 + +/* PWN MNGMNT */ +#define RECPWRM_LOW_PWR 0x0E +#define PLBPWRM_LOW_PWR 0x5C +#define PLBCTRL_POP_LPWR 0x10 +#define PLBCTRL_POP_OFF 0x06 +#define PLBCTRL_POP_ON 0x00 +#define RECPWRM_RUN_PWR 0x00 +#define PLBPWRM_RUN_PWR 0x03 +#define DAPM_LINE_DEF 0xE6 +#define DAPM_HP_DEF 0xE7 +#define PLB_MUTE_MASK 0x03 + +#define ADAU1361_BITSFRAM_32 0x4000 +#define ADAU1361_BITSFRAM_48 0x8000 + +/*playback output control*/ +#define ADAU1361_VOLUME_MASK 0xFC +#define ADAU1361_VOLUME_BITS 0x2 +#define ADAU1361_MUTE_MASK 0x02 +#define ADAU1361_MUTE_BITS 0x1 +#define ADAU1361_ADVOL_MASK 0xff + +/* + * Reset Mode - ADC capture/DAC playback + * (AInput mixers 0db, AOuput mixers 0db, HP out ON) +*/ +static struct adau1361_mode_register adau1361_reset[RESET_REGISTER_COUNT] = { + /* mute outputs */ + {ADAU_PLBMNOC, 0xE5}, + {ADAU_PLBHPVL, 0x01}, + {ADAU_PLBHPVR, 0x01}, + {ADAU_PLBLOVL, 0x00}, + {ADAU_PLBLOVR, 0x00}, + {ADAU_MICCTRL, 0x00}, + {ADAU_RECPWRM, 0x00}, + {ADAU_RECMLC0, 0x01}, + {ADAU_RECMLC1, RECMLC_MIC_0DB}, + {ADAU_RECMRC0, 0x01}, + {ADAU_RECMRC1, RECMLC_MIC_0DB}, + {ADAU_RECVLCL, 0x82}, + {ADAU_RECVLCR, 0x82}, + {ADAU_RECMBIA, RECMBIA_DISABLE}, + {ADAU_ALCCTR0, 0x00}, + {ADAU_ALCCTR1, 0x00}, + {ADAU_ALCCTR2, 0x00}, + {ADAU_ALCCTR3, 0x1F}, + {ADAU_SPRTCT0, ADAU_SRPT_CTRL0}, + {ADAU_SPRTCT1, 0x01}, /* 0x01 = 64bclocks frame */ + {ADAU_CONVCT0, 0x00}, + {ADAU_CONVCT1, 0x00}, + {ADAU_ADCCTL0, 0x00}, + {ADAU_ADCCTL1, 0x00}, + {ADAU_ADCCTL2, 0x00}, + {ADAU_PLBMLC0, 0x21}, + {ADAU_PLBMLC1, 0x00}, + {ADAU_PLBMRC0, 0x41}, + {ADAU_PLBMRC1, 0x00}, + {ADAU_PLBMLLO, 0x03}, + {ADAU_PLBMRLO, 0x09}, + {ADAU_PLBLRMC, 0x01}, + {ADAU_PLBCTRL, 0x00}, + {ADAU_PLBPWRM, 0x00}, + {ADAU_DACCTL0, 0x03}, + {ADAU_DACCTL1, 0x00}, + {ADAU_DACCTL2, 0x00}, + {ADAU_SERPAD0, 0xAA}, + {ADAU_COMPAD0, 0xAA}, + {ADAU_COMPAD1, 0x00}, + {ADAU_MCLKPAD, 0x0A}, +}; + +/* + * Default Mode + * Analog microphones, ADC capture/DAC playback + * (AInput mixers ON, AOuput mixers ON, HP out ON) +*/ +static struct adau1361_mode_register adau1361_mode0[MODE_REGISTER_COUNT] = { + /* mute outputs */ + {ADAU_PLBHPVL, 0x03}, + {ADAU_PLBHPVR, 0x03}, + {ADAU_PLBLOVL, 0x02}, + {ADAU_PLBLOVR, 0x02}, + {ADAU_PLBMNOC, 0xE5}, + /*analog mic*/ + {ADAU_RECVLCL, 0x42}, + {ADAU_RECVLCR, 0x42}, + {ADAU_MICCTRL, 0x00}, +}; + +/* + * Digital Microphone mode, + * IIS Master, ADC capture/DAC playback + * (AInput mixers OFF, AOuput mixers ON, HP out ON) + */ +static struct adau1361_mode_register adau1361_mode1[MODE_REGISTER_COUNT] = { + /* mute outputs */ + {ADAU_PLBHPVL, 0x03}, + {ADAU_PLBHPVR, 0x03}, + {ADAU_PLBLOVL, 0x02}, + {ADAU_PLBLOVR, 0x02}, + {ADAU_PLBMNOC, 0xE5}, + /*digital mic*/ + {ADAU_RECVLCL, 0x00}, + {ADAU_RECVLCR, 0x00}, + {ADAU_MICCTRL, 0x20}, +}; + +static struct adau1361_mode_register *adau1361_mode_registers[] = { + adau1361_mode0, + adau1361_mode1, +}; + +extern struct snd_soc_dai adau1361_dai; +extern struct snd_soc_codec_device soc_codec_dev_adau1361; + +#endif -- 1.7.2

4 17

[alsa-devel] [PATCH 1/2] ASoC: new ADAV801/ADAV803 codec driver
by Mike Frysinger 07 Aug '10

07 Aug '10

From: Yi Li <yi.li(a)analog.com> Signed-off-by: Yi Li <yi.li(a)analog.com> Signed-off-by: Cliff Cai <cliff.cai(a)analog.com> Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- sound/soc/codecs/Kconfig | 6 +- sound/soc/codecs/Makefile | 2 + sound/soc/codecs/adav80x.c | 631 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/adav80x.h | 93 +++++++ 4 files changed, 731 insertions(+), 1 deletions(-) create mode 100644 sound/soc/codecs/adav80x.c create mode 100644 sound/soc/codecs/adav80x.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 5db82d2..ae01cba 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -15,8 +15,9 @@ config SND_SOC_ALL_CODECS select SND_SOC_AD1836 if SPI_MASTER select SND_SOC_AD193X if SND_SOC_I2C_AND_SPI select SND_SOC_AD1980 if SND_SOC_AC97_BUS - select SND_SOC_ADS117X select SND_SOC_AD73311 if I2C + select SND_SOC_ADAV80X if SND_SOC_I2C_AND_SPI + select SND_SOC_ADS117X select SND_SOC_AK4104 if SPI_MASTER select SND_SOC_AK4535 if I2C select SND_SOC_AK4642 if I2C @@ -103,6 +104,9 @@ config SND_SOC_AD1980 config SND_SOC_AD73311 tristate +config SND_SOC_ADAV80X + tristate + config SND_SOC_ADS117X tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 7593eeb..f5b3d5b 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -3,6 +3,7 @@ snd-soc-ad1836-objs := ad1836.o snd-soc-ad193x-objs := ad193x.o snd-soc-ad1980-objs := ad1980.o snd-soc-ad73311-objs := ad73311.o +snd-soc-adav80x-objs := adav80x.o snd-soc-ads117x-objs := ads117x.o snd-soc-ak4104-objs := ak4104.o snd-soc-ak4535-objs := ak4535.o @@ -69,6 +70,7 @@ obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o obj-$(CONFIG_SND_SOC_AD1980) += snd-soc-ad1980.o obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o +obj-$(CONFIG_SND_SOC_ADAV80X) += snd-soc-adav80x.o obj-$(CONFIG_SND_SOC_ADS117X) += snd-soc-ads117x.o obj-$(CONFIG_SND_SOC_AK4104) += snd-soc-ak4104.o obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o diff --git a/sound/soc/codecs/adav80x.c b/sound/soc/codecs/adav80x.c new file mode 100644 index 0000000..778473c --- /dev/null +++ b/sound/soc/codecs/adav80x.c @@ -0,0 +1,631 @@ +/* + * ADAV80X Audio Codec driver supporting ADAV801, ADAV803 + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> +#include <sound/tlv.h> +#include <sound/soc-dapm.h> +#include "adav80x.h" + + +struct adav80x_priv { + struct snd_soc_codec codec; + u16 reg_cache[ADAV80X_NUM_REGS]; + int clk_src; /* clock source for ADC, DAC and internal clock */ +}; + +static struct snd_soc_codec *adav80x_codec; +struct snd_soc_codec_device soc_codec_dev_adav80x; +static int adav80x_register(struct adav80x_priv *adav80x, int bus_type); +static void adav80x_unregister(struct adav80x_priv *adav80x); + +static const struct snd_soc_dapm_widget adav80x_dapm_widgets[] = { + SND_SOC_DAPM_DAC("DAC", "Playback", ADAV80X_DAC_CTRL1, 7, 1), + SND_SOC_DAPM_ADC("ADC", "Capture", ADAV80X_ADC_CTRL1, 5, 1), + SND_SOC_DAPM_SUPPLY("PLL_PWR", ADAV80X_PLL_CTRL1, 1, 1, NULL, 0), +}; + +static const struct snd_soc_dapm_route audio_paths[] = { + { "DAC", NULL, "PLL_PWR" }, + { "ADC", NULL, "PLL_PWR" }, +}; + +/* + * ADAV80X volume/mute/de-emphasis etc. controls + */ +static const char *adav80x_deemp[] = {"None", "44.1kHz", "32kHz", "48kHz"}; + +static const struct soc_enum adav80x_deemp_enum = +SOC_ENUM_SINGLE(ADAV80X_DAC_CTRL2, 0, 4, adav80x_deemp); + +static const struct snd_kcontrol_new adav80x_snd_controls[] = { + /* DAC volume control */ + SOC_DOUBLE_R("DAC Volume", ADAV80X_DAC_L_VOL, + ADAV80X_DAC_R_VOL, 0, 0xFF, 0), + /* DAC peak volume detect, read clears it */ + SOC_DOUBLE_R("DAC Peak Volume", ADAV80X_DAC_L_PEAK_VOL, + ADAV80X_DAC_R_PEAK_VOL, 0, 0x3F, 0), + + /* ADC volume control */ + SOC_DOUBLE_R("ADC Volume", ADAV80X_ADC_L_VOL, + ADAV80X_ADC_R_VOL, 0, 0xFF, 0), + /* ADC peak volume detect */ + SOC_DOUBLE_R("ADC Peak Volume", ADAV80X_ADC_L_PEAK_VOL, + ADAV80X_ADC_R_PEAK_VOL, 0, 0x3F, 0), + + /* ADC mute */ + SOC_DOUBLE("ADC Switch", ADAV80X_ADC_CTRL1, 2, 3, 1, 1), + + /* DAC mute */ + SOC_DOUBLE("DAC Switch", ADAV80X_DAC_CTRL1, 0, 1, 1, 1), + + /* ADC high-pass filter */ + SOC_SINGLE("ADC High Pass Filter Switch", ADAV80X_ADC_CTRL1, 6, 1, 0), + + /* DAC de-emphasis */ + SOC_ENUM("Playback Deemphasis", adav80x_deemp_enum), +}; + +/* + * DAI ops entries + */ + +static int adav80x_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u8 rec_ctl = 0, playback_ctl = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + /* use internal clock 1 */ + playback_ctl |= 0x10; + rec_ctl |= 0x20; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + /* DAC word length depends on input, ADC need to set word length */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + playback_ctl |= 0x1; + rec_ctl |= 0x1; + break; + case SND_SOC_DAIFMT_RIGHT_J: + playback_ctl |= 0x4; + rec_ctl |= 0x3; + break; + case SND_SOC_DAIFMT_LEFT_J: + break; + default: + return -EINVAL; + } + + /* clock inversion */ + /* Use default - seems no polarity setting */ + /* DAC control reg 1: CHSEL[1:0], POL[1:0] ? */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + default: + return -EINVAL; + } + + snd_soc_write(codec, ADAV80X_PLAYBACK_CTRL, playback_ctl); + snd_soc_write(codec, ADAV80X_REC_CTRL, rec_ctl); + + return 0; +} + +static int adav80x_set_adc_clock(struct snd_soc_codec *codec, + int clk_id, unsigned int sample_rate) +{ + int reg; + + if (clk_id == ADAV80X_CLK_PLL1) { + /* ADC assumes that the MCLK ratre is 256 times the sample rate. + We also assumes PLL1 clock rate to be (256 * Fs), + So set ADC MCLK divider to be 1 */ + + reg = snd_soc_read(codec, ADAV80X_ADC_CTRL1); + /* ADC Modulator clock is 6.144MHz Max, + need to set devidor properly */ + if (sample_rate == 96000) + reg |= 0x80; + else if (sample_rate == 48000) + reg &= 0x7F; + else + /* Unsupported sample rate */ + return -1; + + snd_soc_write(codec, ADAV80X_ADC_CTRL1, reg); + } + + return 0; +} + +static int adav80x_set_dac_clock(struct snd_soc_codec *codec, + int clk_id, unsigned int sample_rate) +{ + int reg; + + if (clk_id == ADAV80X_CLK_PLL1) { + /* PLL1 clock rate is assumed to be 256 * Fs */ + + reg = snd_soc_read(codec, ADAV80X_DAC_CTRL2); + if (sample_rate == 96000) + /* Set the MCLK divider to be MCLK/2, + and MCLK = 128 * Fs */ + reg |= 0x24; + else + reg &= 0x11; + + snd_soc_write(codec, ADAV80X_DAC_CTRL2, reg); + } + + return 0; +} + +static int adav80x_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + int word_len = 0; + int rate = params_rate(params); + + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + struct adav80x_priv *adav80x = codec->private_data; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + word_len = 3; + break; + case SNDRV_PCM_FORMAT_S18_3LE: + word_len = 2; + break; + case SNDRV_PCM_FORMAT_S20_3LE: + word_len = 1; + break; + case SNDRV_PCM_FORMAT_S24_LE: + word_len = 0; + break; + } + + + /* Playback port does not need to set word length? */ + + /* Record Port Control */ + snd_soc_update_bits(codec, ADAV80X_REC_CTRL, 0x3<<2, word_len<<2); + + /* Set up clock */ + if (adav80x->clk_src == ADAV80X_CLK_PLL1) { + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + adav80x_set_dac_clock(codec, ADAV80X_CLK_PLL1, rate); + else + adav80x_set_adc_clock(codec, ADAV80X_CLK_PLL1, rate); + } + + return 0; +} + +#ifdef CONFIG_PM +static int adav80x_soc_suspend(struct platform_device *pdev, + pm_message_t state) +{ + return 0; +} + +static int adav80x_soc_resume(struct platform_device *pdev) +{ + return 0; +} +#else +#define adav80x_soc_suspend NULL +#define adav80x_soc_resume NULL +#endif + +static int adav80x_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + int reg; + + reg = snd_soc_read(codec, ADAV80X_DAC_CTRL1); + reg = (mute > 0) ? reg & ~0x3 : reg | 0x3; + snd_soc_write(codec, ADAV80X_DAC_CTRL1, reg); + + return 0; +} + + +static int adav80x_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct adav80x_priv *adav80x = codec->private_data; + int reg = 0; + + /* For now, we only enable PLL1 with XIN as source */ + if (source != ADAV80X_CLK_XIN) + return -1; + + if (freq_in && freq_out) { + /* XIN - assumes 27MHz */ + if (freq_in != 27000000) + return -1; + + if (pll_id != ADAV80X_CLK_PLL1) + return -1; + + /* freq_out = sample_rate * 256 */ + switch (freq_out) { + case 32000: + reg = 0x8; + break; + case 44100: + reg = 0xC; + break; + case 48000: + reg = 0x0; + break; + case 64000: + reg = 0x9; + break; + case 88200: + reg = 0xD; + break; + case 96000: + reg = 0x1; + break; + } + + /* Set PLL1 clock */ + snd_soc_write(codec, ADAV80X_PLL_CTRL2, reg); + + if (adav80x->clk_src == ADAV80X_CLK_PLL1) + return 0; + else + adav80x->clk_src = ADAV80X_CLK_PLL1; + + /* select XIN as PLL1 clock source */ + snd_soc_write(codec, ADAV80X_PLL_CLK_SRC, 0x0); + /* set PLL1 as clock source for internal clock, DAC, ADC */ + snd_soc_write(codec, ADAV80X_ICLK_CTRL1, 0x4A); + snd_soc_write(codec, ADAV80X_ICLK_CTRL2, 0x10); + /* Power on PLL1, power down PLL2, power on XTAL */ + snd_soc_write(codec, ADAV80X_PLL_CTRL1, 0x8); + + } else { + if (adav80x->clk_src == ADAV80X_CLK_XIN) + return 0; + else + adav80x->clk_src = ADAV80X_CLK_XIN; + + /* Turn off PLL, power on XTAL */ + snd_soc_write(codec, ADAV80X_PLL_CTRL1, 0xC); + + /* DAC, ADC, ICLK clock source - XIN */ + snd_soc_write(codec, ADAV80X_ICLK_CTRL1, 0x0); + snd_soc_write(codec, ADAV80X_ICLK_CTRL2, 0x0); + } + + return 0; +} + +static struct snd_soc_dai_ops adav80x_dai_ops = { + .hw_params = adav80x_hw_params, + .set_fmt = adav80x_set_dai_fmt, + .digital_mute = adav80x_mute, + .set_pll = adav80x_set_dai_pll, +}; + +/* codec DAI instance */ +/* DAC sample rates: 32/44.1/48/96/192kHz, ADC sample reate: 48/96kHz - TBD */ +struct snd_soc_dai adav80x_dai = { + .name = "ADAV80X", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_96000, + .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000, + .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE, + }, + .ops = &adav80x_dai_ops, +}; +EXPORT_SYMBOL_GPL(adav80x_dai); + + +static int adav80x_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + if (adav80x_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } + + socdev->card->codec = adav80x_codec; + codec = adav80x_codec; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + snd_soc_add_controls(codec, adav80x_snd_controls, + ARRAY_SIZE(adav80x_snd_controls)); + snd_soc_dapm_new_controls(codec, adav80x_dapm_widgets, + ARRAY_SIZE(adav80x_dapm_widgets)); + snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths)); + +pcm_err: + return ret; +} + +/* power down chip */ +static int adav80x_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_adav80x = { + .probe = adav80x_probe, + .remove = adav80x_remove, + .suspend = adav80x_soc_suspend, + .resume = adav80x_soc_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_adav80x); + +static int adav80x_register(struct adav80x_priv *adav80x, int bus_type) +{ + int ret; + struct snd_soc_codec *codec = &adav80x->codec; + + if (adav80x_codec) { + dev_err(codec->dev, "Another adav80x is registered\n"); + return -EINVAL; + } + + mutex_init(&codec->mutex); + codec->private_data = adav80x; + codec->reg_cache = adav80x->reg_cache; + codec->reg_cache_size = ADAV80X_NUM_REGS; + codec->name = "ADAV80X"; + codec->owner = THIS_MODULE; + codec->dai = &adav80x_dai; + codec->num_dai = 1; + + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + adav80x_dai.dev = codec->dev; + adav80x_codec = codec; + + + if (bus_type == SND_SOC_I2C) + /* addr(7-bit left shifted 1), data(8bit)*/ + ret = snd_soc_codec_set_cache_io(codec, 8, 8, bus_type); + else + /* register format: addr(7bit), data(9bit) */ + /* set spi bits_per_word to 8 instead of 16, + since addr need to be transfer before data */ + ret = snd_soc_codec_set_cache_io(codec, 7, 9, bus_type); + if (ret < 0) { + dev_err(codec->dev, "failed to set cache I/O: %d\n", + ret); + kfree(adav80x); + return ret; + } + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + kfree(adav80x); + return ret; + } + + ret = snd_soc_register_dai(&adav80x_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + kfree(adav80x); + return ret; + } + + /* default setting for adav80x */ + + /* Power down SYSCLK output, power down S/PDIF receiver */ + snd_soc_write(codec, ADAV80X_PLL_OUTE, 0x27); + + /* Disable S/PDIF transmitter */ + snd_soc_write(codec, ADAV80X_TX_CTRL, 0x0); + + /* Datapath: ADC->record, AUX_IN->SRC->AUX_OUT */ + snd_soc_write(codec, ADAV80X_DPATH_CTRL1, 0xC4); + /* Datapath: playback->DAC, DIR->DIT */ + snd_soc_write(codec, ADAV80X_DPATH_CTRL2, 0x11); + + /* Soft-mute SRC output */ + snd_soc_write(codec, ADAV80X_GDELAY_MUTE, 0x80); + + /* DAC: de-emphasis: none, MCLCK divider: 1, MCLK=256xFs */ + /* snd_soc_write(codec, ADAV80X_DAC_CTRL2, 0x0); */ + /* Disable DAC zero flag */ + snd_soc_write(codec, ADAV80X_DAC_CTRL3, 0x6); + /* DAC: volume */ + snd_soc_write(codec, ADAV80X_DAC_L_VOL, 0xFF); + snd_soc_write(codec, ADAV80X_DAC_R_VOL, 0xFF); + + /* ADC: power up, unmute adc channles */ + /* snd_soc_write(codec, ADAV80X_ADC_CTRL1, 0x0); */ + /* MCLCK divider: 1 */ + /* snd_soc_write(codec, ADAV80X_ADC_CTRL2, 0x0); */ + /* ADC: volumn */ + snd_soc_write(codec, ADAV80X_ADC_L_VOL, 0xFF); + snd_soc_write(codec, ADAV80X_ADC_R_VOL, 0xFF); + + /* Disable ALC */ + snd_soc_write(codec, ADAV80X_ALC_CTRL1, 0x0); + + return 0; +} + +static void adav80x_unregister(struct adav80x_priv *adav80x) +{ + snd_soc_unregister_dai(&adav80x_dai); + snd_soc_unregister_codec(&adav80x->codec); + kfree(adav80x); + adav80x_codec = NULL; +} + +static int __devinit adav80x_bus_probe(struct device *dev, void *ctrl_data, + int bus_type) +{ + struct snd_soc_codec *codec; + struct adav80x_priv *adav80x; + + adav80x = kzalloc(sizeof(struct adav80x_priv), GFP_KERNEL); + if (adav80x == NULL) + return -ENOMEM; + + codec = &adav80x->codec; + codec->control_data = ctrl_data; + codec->dev = dev; + + dev_set_drvdata(dev, adav80x); + + return adav80x_register(adav80x, bus_type); +} + +int adav80x_bus_remove(struct device *dev) +{ + struct adav80x_priv *adav80x = dev_get_drvdata(dev); + + adav80x_unregister(adav80x); + return 0; +} + +#if defined(CONFIG_SPI_MASTER) +static int __devinit adav80x_spi_probe(struct spi_device *spi) +{ + return adav80x_bus_probe(&spi->dev, spi, SND_SOC_SPI); +} + +static int __devexit adav80x_spi_remove(struct spi_device *spi) +{ + return adav80x_bus_remove(&spi->dev); +} + +static struct spi_driver adav80x_spi_driver = { + .driver = { + .name = "adav80x", + .owner = THIS_MODULE, + }, + .probe = adav80x_spi_probe, + .remove = __devexit_p(adav80x_spi_remove), +}; +#endif + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static const struct i2c_device_id adav80x_id[] = { + { "adav803", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adav80x_id); + +static int __devinit adav80x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return adav80x_bus_probe(&client->dev, client, SND_SOC_I2C); +} + +static int __devexit adav80x_i2c_remove(struct i2c_client *client) +{ + return adav80x_bus_remove(&client->dev); +} + +static struct i2c_driver adav80x_i2c_driver = { + .driver = { + .name = "adav80x", + }, + .probe = adav80x_i2c_probe, + .remove = __devexit_p(adav80x_i2c_remove), + .id_table = adav80x_id, +}; +#endif + +static int __init adav80x_init(void) +{ + int ret; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&adav80x_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register ADAV80X I2C driver: %d\n", + ret); + } +#elif defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&adav80x_spi_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register ADAV80X SPI driver: %d\n", + ret); + } +#endif + return ret; +} +module_init(adav80x_init); + +static void __exit adav80x_exit(void) +{ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&adav80x_i2c_driver); +#elif defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&adav80x_spi_driver); +#endif +} +module_exit(adav80x_exit); + +MODULE_DESCRIPTION("ASoC adav80x driver"); +MODULE_AUTHOR("Yi Li"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/adav80x.h b/sound/soc/codecs/adav80x.h new file mode 100644 index 0000000..b4a5a4d --- /dev/null +++ b/sound/soc/codecs/adav80x.h @@ -0,0 +1,93 @@ +extern struct snd_soc_dai adav80x_dai; +extern struct snd_soc_codec_device soc_codec_dev_adav80x; + +/* Clock source */ +#define ADAV80X_CLK_XIN 1 +#define ADAV80X_CLK_PLL1 2 +#define ADAV80X_CLK_PLL2 3 +#define ADAV80X_CLK_INTERNAL1 4 +#define ADAV80X_CLK_INTERNAL2 5 +#define ADAV80X_CLK_MCLKI 6 + + +#if (CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +/* ADAV80X I2C interface requires left-shifting reg addr for 1-bit */ +#define ADAV80X_NUM_REGS (0x7E<<1) + +#define ADAV80X_PLAYBACK_CTRL (0x4<<1) +#define ADAV80X_AUX_IN_CTRL (0x5<<1) +#define ADAV80X_REC_CTRL (0x6<<1) +#define ADAV80X_AUX_OUT_CTRL (0x7<<1) +#define ADAV80X_GDELAY_MUTE (0x8<<1) + + +#define ADAV80X_TX_CTRL (0xC<<1) + +#define ADAV80X_DPATH_CTRL1 (0x62<<1) +#define ADAV80X_DPATH_CTRL2 (0x63<<1) +#define ADAV80X_DAC_CTRL1 (0x64<<1) +#define ADAV80X_DAC_CTRL2 (0x65<<1) +#define ADAV80X_DAC_CTRL3 (0x66<<1) +#define ADAV80X_DAC_CTRL4 (0x67<<1) +#define ADAV80X_DAC_L_VOL (0x68<<1) +#define ADAV80X_DAC_R_VOL (0x69<<1) +#define ADAV80X_DAC_L_PEAK_VOL (0x6A<<1) +#define ADAV80X_DAC_R_PEAK_VOL (0x6B<<1) + + +#define ADAV80X_ADC_CTRL1 (0x6E<<1) +#define ADAV80X_ADC_CTRL2 (0x6F<<1) +#define ADAV80X_ADC_L_VOL (0x70<<1) +#define ADAV80X_ADC_R_VOL (0x71<<1) +#define ADAV80X_ADC_L_PEAK_VOL (0x72<<1) +#define ADAV80X_ADC_R_PEAK_VOL (0x73<<1) +#define ADAV80X_PLL_CTRL1 (0x74<<1) +#define ADAV80X_PLL_CTRL2 (0x75<<1) +#define ADAV80X_ICLK_CTRL1 (0x76<<1) +#define ADAV80X_ICLK_CTRL2 (0x77<<1) +#define ADAV80X_PLL_CLK_SRC (0x78<<1) + +#define ADAV80X_PLL_OUTE (0x7A<<1) +#define ADAV80X_ALC_CTRL1 (0x7B<<1) + +#elif defined(CONFIG_SPI_MASTER) +/* from 0x0 to 0x7D */ +#define ADAV80X_NUM_REGS 0x7E + +#define ADAV80X_PLAYBACK_CTRL 0x4 +#define ADAV80X_AUX_IN_CTRL 0x5 +#define ADAV80X_REC_CTRL 0x6 +#define ADAV80X_AUX_OUT_CTRL 0x7 +#define ADAV80X_GDELAY_MUTE 0x8 + + +#define ADAV80X_TX_CTRL 0xC + +#define ADAV80X_DPATH_CTRL1 0x62 +#define ADAV80X_DPATH_CTRL2 0x63 +#define ADAV80X_DAC_CTRL1 0x64 +#define ADAV80X_DAC_CTRL2 0x65 +#define ADAV80X_DAC_CTRL3 0x66 +#define ADAV80X_DAC_CTRL4 0x67 +#define ADAV80X_DAC_L_VOL 0x68 +#define ADAV80X_DAC_R_VOL 0x69 +#define ADAV80X_DAC_L_PEAK_VOL 0x6A +#define ADAV80X_DAC_R_PEAK_VOL 0x6B + + +#define ADAV80X_ADC_CTRL1 0x6E +#define ADAV80X_ADC_CTRL2 0x6F +#define ADAV80X_ADC_L_VOL 0x70 +#define ADAV80X_ADC_R_VOL 0x71 +#define ADAV80X_ADC_L_PEAK_VOL 0x72 +#define ADAV80X_ADC_R_PEAK_VOL 0x73 +#define ADAV80X_PLL_CTRL1 0x74 +#define ADAV80X_PLL_CTRL2 0x75 +#define ADAV80X_ICLK_CTRL1 0x76 +#define ADAV80X_ICLK_CTRL2 0x77 +#define ADAV80X_PLL_CLK_SRC 0x78 + +#define ADAV80X_PLL_OUTE 0x7A +#define ADAV80X_ALC_CTRL1 0x7B + +#endif -- 1.7.2

3 4

[alsa-devel] [PATCH 0/2] ASoC: multi-comp: twl4030 updates
by Peter Ujfalusi 07 Aug '10

07 Aug '10

Hello Liam, Mark! The following two patch is for the current multi-comp branch with twl4030 related fixes. I have separated them, so they can be squased to the corresponding commit in multi-comp branch for now. The changes in short: - We do not need the header sound/soc/codecs/twl4030.h anymore, so remove it - Fix machine drivers with theis header removal - The codec no longer get's the former setup data, all configuration is coming from board files via the platform_data. So change the code accordingly - Move the twl4030_priv allocation to a proper place - Codec can shall go OFF instead of STANDBY, so add back the idle_bias_off flag - The MFD driver is twl4030-audio TODO after the multi-comp is merged: - Rename the mfd driver to twl4030-audio. Clean up the internal naming within the mfd This going to touch many files... One more notice: The multi-comp branch does not have the "ASoC: TWL4030: Capture route runtime DAPM ordering fix" commit yet, and I have tested my changes on top of that, but it should not be a big problem, when you rebase this driver. What do you think? Peter --- Peter Ujfalusi (2): ASoC: multi-comp: twl4030: TI CODECs ASoC: multi-comp: twl4030: TI OMAP Platform drivers/mfd/twl-core.c | 2 +- drivers/mfd/twl4030-codec.c | 4 +- include/linux/i2c/twl.h | 6 +++- sound/soc/codecs/twl4030.c | 73 ++++++++++++++++++++--------------------- sound/soc/codecs/twl4030.h | 52 ----------------------------- sound/soc/omap/igep0020.c | 1 - sound/soc/omap/omap2evm.c | 1 - sound/soc/omap/omap3beagle.c | 1 - sound/soc/omap/omap3evm.c | 1 - sound/soc/omap/omap3pandora.c | 1 - sound/soc/omap/overo.c | 1 - sound/soc/omap/sdp3430.c | 4 ++- sound/soc/omap/zoom2.c | 4 ++- 13 files changed, 50 insertions(+), 101 deletions(-) delete mode 100644 sound/soc/codecs/twl4030.h -- 1.7.2

3 5

[alsa-devel] [PATCH v2 0/3] ASoC: multi-comp: OMAP platform fixes
by Peter Ujfalusi 07 Aug '10

07 Aug '10

Hello, Changes since v1: - include plat/mcbsp.c in arch/arm/mach-omap1/devices.c - Runtime port number configuration based on OMAP type (both omap1 and omap2) Commit message from the first series: The following series introduces some cleanups for OMAP platforms in multi-component branch. - Enable audio for OMAP1 class - Registers only the available amount of omap-mcbsp-dai devices for OMAP2,3, and 4 Please do verify, if the chages are correct, especially the number of McBSP ports on different devices. Liam: in case you take this, you can squash this to the corresponding commit. Since I do not have access at the moment to OMAP1 based board, the changes has not been tested, but at least it should allow the audio (in theory).. Peter --- Peter Ujfalusi (3): ASoC: multi-comp: OMAP McBSP: use macro for platform_device ASoC: multi-comp: OMAP McBSP: Enable audio on OMAP1 platform ASoC: multi-comp: OMAP2,3,4 McBSP: register correct number of ports arch/arm/mach-omap1/devices.c | 26 +++++++++++++++++ arch/arm/mach-omap2/devices.c | 46 ++++++++++++------------------- arch/arm/plat-omap/include/plat/mcbsp.h | 7 +++++ 3 files changed, 51 insertions(+), 28 deletions(-) -- 1.7.2

3 5

[alsa-devel] [PATCH 1/3] ASoC: Remove /s from widget names on SMDK64xx WM8580
by Mark Brown 06 Aug '10

06 Aug '10

Otherwise debugfs gets upset when we try to create filenames with / in them. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/s3c24xx/smdk64xx_wm8580.c | 18 +++++++++--------- 1 files changed, 9 insertions(+), 9 deletions(-) diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c index 07e8e51..5853f66 100644 --- a/sound/soc/s3c24xx/smdk64xx_wm8580.c +++ b/sound/soc/s3c24xx/smdk64xx_wm8580.c @@ -138,9 +138,9 @@ static struct snd_soc_ops smdk64xx_ops = { /* SMDK64xx Playback widgets */ static const struct snd_soc_dapm_widget wm8580_dapm_widgets_pbk[] = { - SND_SOC_DAPM_HP("Front-L/R", NULL), - SND_SOC_DAPM_HP("Center/Sub", NULL), - SND_SOC_DAPM_HP("Rear-L/R", NULL), + SND_SOC_DAPM_HP("Front", NULL), + SND_SOC_DAPM_HP("Center+Sub", NULL), + SND_SOC_DAPM_HP("Rear", NULL), }; /* SMDK64xx Capture widgets */ @@ -162,16 +162,16 @@ static const struct snd_soc_dapm_route audio_map_tx[] = { /* SMDK-PAIFRX connections */ static const struct snd_soc_dapm_route audio_map_rx[] = { /* Front Left/Right are fed VOUT1L/R */ - {"Front-L/R", NULL, "VOUT1L"}, - {"Front-L/R", NULL, "VOUT1R"}, + {"Front", NULL, "VOUT1L"}, + {"Front", NULL, "VOUT1R"}, /* Center/Sub are fed VOUT2L/R */ - {"Center/Sub", NULL, "VOUT2L"}, - {"Center/Sub", NULL, "VOUT2R"}, + {"Center+Sub", NULL, "VOUT2L"}, + {"Center+Sub", NULL, "VOUT2R"}, /* Rear Left/Right are fed VOUT3L/R */ - {"Rear-L/R", NULL, "VOUT3L"}, - {"Rear-L/R", NULL, "VOUT3R"}, + {"Rear", NULL, "VOUT3L"}, + {"Rear", NULL, "VOUT3R"}, }; static int smdk64xx_wm8580_init_paiftx(struct snd_soc_codec *codec) -- 1.7.1

2 3

[alsa-devel] [PATCH] ASoC: Fix inverted mute controls for WM8580
by Mark Brown 06 Aug '10

06 Aug '10

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> Cc: stable(a)kernel.org --- sound/soc/codecs/wm8580.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) This one really ought to get pushed for 2.6.36. diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index c3571ee..72deeab 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -269,9 +269,9 @@ SOC_DOUBLE("DAC2 Invert Switch", WM8580_DAC_CONTROL4, 2, 3, 1, 0), SOC_DOUBLE("DAC3 Invert Switch", WM8580_DAC_CONTROL4, 4, 5, 1, 0), SOC_SINGLE("DAC ZC Switch", WM8580_DAC_CONTROL5, 5, 1, 0), -SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 0), -SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 0), -SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 0), +SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 1), +SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 1), +SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 1), SOC_DOUBLE("ADC Mute Switch", WM8580_ADC_CONTROL1, 0, 1, 1, 0), SOC_SINGLE("ADC High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0), -- 1.7.1

2 1

[alsa-devel] alsa-asoc-devel?
by David Henningsson 06 Aug '10

06 Aug '10

Hi, There is a lot of asoc traffic on this list, and I assume many people following this list are not interested in ASoC patches. Have you considered splitting the alsa-devel mailing list into an alsa-asoc-devel mailing list, for ASoC specific stuff, and alsa-devel for everything else? -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

4 5

[alsa-devel] [PATCH] ASoC: multi-component - Fix tlv320aic3x GPIO initialization
by Jarkko Nikula 06 Aug '10

06 Aug '10

aic3x_init does a soft reset first and thus TLV320AIC3x GPIO setup must be done after doing the basic init. Before multi-component the init was done at i2c probe time and GPIO setup at soc probe time. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- Liam, squash into TI CODECs commit. --- sound/soc/codecs/tlv320aic3x.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 43fd9c1..0b80e24 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1231,6 +1231,8 @@ static int aic3x_probe(struct snd_soc_codec *codec) codec->hw_write = (hw_write_t) i2c_master_send; codec->control_data = aic3x->control_data; + aic3x_init(codec); + if (aic3x->setup) { /* setup GPIO functions */ aic3x_write(codec, AIC3X_GPIO1_REG, @@ -1239,8 +1241,6 @@ static int aic3x_probe(struct snd_soc_codec *codec) (aic3x->setup->gpio_func[1] & 0xf) << 4); } - aic3x_init(codec); - snd_soc_add_controls(codec, aic3x_snd_controls, ARRAY_SIZE(aic3x_snd_controls)); -- 1.7.1

2 1

[alsa-devel] [PATCH 35/42] sound/oss: Adjust confusing if indentation
by Julia Lawall 06 Aug '10

06 Aug '10

From: Julia Lawall <julia(a)diku.dk> Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia(a)diku.dk> --- sound/oss/ad1848.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c index 24793c5..4d2a6ae 100644 --- a/sound/oss/ad1848.c +++ b/sound/oss/ad1848.c @@ -716,7 +716,7 @@ static int ad1848_mixer_ioctl(int dev, unsigned int cmd, void __user *arg) default: if (get_user(val, (int __user *)arg)) - return -EFAULT; + return -EFAULT; val = ad1848_mixer_set(devc, cmd & 0xff, val); break; }

2 1

[alsa-devel] [PATCH 13/15] sound: oss: au1550_ac97.c removed duplicated #include
by Andrea Gelmini 06 Aug '10

06 Aug '10

Signed-off-by: Andrea Gelmini <andrea.gelmini(a)gelma.net> --- sound/oss/au1550_ac97.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c index c1070e3..3964306 100644 --- a/sound/oss/au1550_ac97.c +++ b/sound/oss/au1550_ac97.c @@ -49,7 +49,6 @@ #include <linux/poll.h> #include <linux/bitops.h> #include <linux/spinlock.h> -#include <linux/smp_lock.h> #include <linux/ac97_codec.h> #include <linux/mutex.h> -- 1.7.2.1.85.g2d089

2 1

[alsa-devel] ALSA Mixer issue
by sudarshan bisht 06 Aug '10

06 Aug '10

Hi , I wanted to know that can we use multiple handlers for the same ALSA mixer ? My use case is something like this . I have two modules and having two different handlers for ALSA mixer. First module does some volume change , and I try to read the latest volume using my second handler ( of first second module) . But I am not getting the most recent value in second handler ( the volume set by the first module ) so I feel there is some inconsistency when I use two handlers from two different modules in order to fetch volume information from the ALSA mixer. -- Regards, Sudarshan Bisht

2 4

[alsa-devel] [PATCH] asoc/multi-component: fsl: add support for variable SSI FIFO depth
by Timur Tabi 06 Aug '10

06 Aug '10

Add code that programs the DMA and SSI controllers differently based on the FIFO depth of the SSI. The SSI devices on the MPC8610 and the P1022 are identical in every way except one: the transmit and receive FIFO depth. On the MPC8610, the depth is eight. On the P1022, it's fifteen. The device tree nodes for the SSI include a "fsl,fifo-depth" property that specifies the FIFO depth. Signed-off-by: Timur Tabi <timur(a)freescale.com> --- sound/soc/fsl/fsl_dma.c | 69 ++++++++++++++++++++++++++++++++++++----------- sound/soc/fsl/fsl_ssi.c | 27 ++++++++++++++++-- 2 files changed, 77 insertions(+), 19 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 57774cb..2f1461a 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -60,6 +60,7 @@ struct dma_object { struct snd_soc_platform_driver dai; dma_addr_t ssi_stx_phys; dma_addr_t ssi_srx_phys; + unsigned int ssi_fifo_depth; struct ccsr_dma_channel __iomem *channel; unsigned int irq; bool assigned; @@ -99,6 +100,7 @@ struct fsl_dma_private { unsigned int irq; struct snd_pcm_substream *substream; dma_addr_t ssi_sxx_phys; + unsigned int ssi_fifo_depth; dma_addr_t ld_buf_phys; unsigned int current_link; dma_addr_t dma_buf_phys; @@ -431,6 +433,7 @@ static int fsl_dma_open(struct snd_pcm_substream *substream) else dma_private->ssi_sxx_phys = dma->ssi_srx_phys; + dma_private->ssi_fifo_depth = dma->ssi_fifo_depth; dma_private->dma_channel = dma->channel; dma_private->irq = dma->irq; dma_private->substream = substream; @@ -544,11 +547,11 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, struct device *dev = rtd->platform->dev; /* Number of bits per sample */ - unsigned int sample_size = + unsigned int sample_bits = snd_pcm_format_physical_width(params_format(hw_params)); /* Number of bytes per frame */ - unsigned int frame_size = 2 * (sample_size / 8); + unsigned int sample_bytes = sample_bits / 8; /* Bus address of SSI STX register */ dma_addr_t ssi_sxx_phys = dma_private->ssi_sxx_phys; @@ -588,7 +591,7 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, * that offset here. While we're at it, also tell the DMA controller * how much data to transfer per sample. */ - switch (sample_size) { + switch (sample_bits) { case 8: mr |= CCSR_DMA_MR_DAHTS_1 | CCSR_DMA_MR_SAHTS_1; ssi_sxx_phys += 3; @@ -602,22 +605,42 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, break; default: /* We should never get here */ - dev_err(dev, "unsupported sample size %u\n", sample_size); + dev_err(dev, "unsupported sample size %u\n", sample_bits); return -EINVAL; } /* - * BWC should always be a multiple of the frame size. BWC determines - * how many bytes are sent/received before the DMA controller checks the - * SSI to see if it needs to stop. For playback, the transmit FIFO can - * hold three frames, so we want to send two frames at a time. For - * capture, the receive FIFO is triggered when it contains one frame, so - * we want to receive one frame at a time. + * BWC determines how many bytes are sent/received before the DMA + * controller checks the SSI to see if it needs to stop. BWC should + * always be a multiple of the frame size, so that we always transmit + * whole frames. Each frame occupies two slots in the FIFO. The + * parameter for CCSR_DMA_MR_BWC() is rounded down the next power of two + * (MR[BWC] can only represent even powers of two). + * + * To simplify the process, we set BWC to the largest value that is + * less than or equal to the FIFO watermark. For playback, this ensures + * that we transfer the maximum amount without overrunning the FIFO. + * For capture, this ensures that we transfer the maximum amount without + * underrunning the FIFO. + * + * f = SSI FIFO depth + * w = SSI watermark value (which equals f - 2) + * b = DMA bandwidth count (in bytes) + * s = sample size (in bytes, which equals frame_size * 2) + * + * For playback, we never transmit more than the transmit FIFO + * watermark, otherwise we might write more data than the FIFO can hold. + * The watermark is equal to the FIFO depth minus two. + * + * For capture, two equations must hold: + * w > f - (b / s) + * w >= b / s + * + * So, b > 2 * s, but b must also be <= s * w. To simplify, we set + * b = s * w, which is equal to + * (dma_private->ssi_fifo_depth - 2) * sample_bytes. */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - mr |= CCSR_DMA_MR_BWC(2 * frame_size); - else - mr |= CCSR_DMA_MR_BWC(frame_size); + mr |= CCSR_DMA_MR_BWC((dma_private->ssi_fifo_depth - 2) * sample_bytes); out_be32(&dma_channel->mr, mr); @@ -871,6 +894,7 @@ static int __devinit fsl_soc_dma_probe(struct of_device *of_dev, struct device_node *np = of_dev->dev.of_node; struct device_node *ssi_np; struct resource res; + const uint32_t *iprop; int ret; /* Find the SSI node that points to us. */ @@ -881,15 +905,17 @@ static int __devinit fsl_soc_dma_probe(struct of_device *of_dev, } ret = of_address_to_resource(ssi_np, 0, &res); - of_node_put(ssi_np); if (ret) { - dev_err(&of_dev->dev, "could not determine device resources\n"); + dev_err(&of_dev->dev, "could not determine resources for %s\n", + ssi_np->full_name); + of_node_put(ssi_np); return ret; } dma = kzalloc(sizeof(*dma) + strlen(np->full_name), GFP_KERNEL); if (!dma) { dev_err(&of_dev->dev, "could not allocate dma object\n"); + of_node_put(ssi_np); return -ENOMEM; } @@ -902,6 +928,17 @@ static int __devinit fsl_soc_dma_probe(struct of_device *of_dev, dma->ssi_stx_phys = res.start + offsetof(struct ccsr_ssi, stx0); dma->ssi_srx_phys = res.start + offsetof(struct ccsr_ssi, srx0); + iprop = of_get_property(ssi_np, "fsl,fifo-depth", NULL); + if (!iprop) { + dev_err(&of_dev->dev, "missing fsl,fifo-depth property in %s\n", + ssi_np->full_name); + kfree(dma); + of_node_put(ssi_np); + return -ENODEV; + } + dma->ssi_fifo_depth = *iprop; + of_node_put(ssi_np); + ret = snd_soc_register_platform(&of_dev->dev, &dma->dai); if (ret) { dev_err(&of_dev->dev, "could not register platform\n"); diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 00e3e62..a0e18b8 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -93,6 +93,7 @@ struct fsl_ssi_private { unsigned int playback; unsigned int capture; int asynchronous; + unsigned int fifo_depth; struct snd_soc_dai_driver cpu_dai_drv; struct device_attribute dev_attr; struct platform_device *pdev; @@ -337,11 +338,20 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, /* * Set the watermark for transmit FIFI 0 and receive FIFO 0. We - * don't use FIFO 1. Since the SSI only supports stereo, the - * watermark should never be an odd number. + * don't use FIFO 1. We program the transmit water to signal a + * DMA transfer if there are only two (or fewer) elements left + * in the FIFO. Two elements equals one frame (left channel, + * right channel). This value, however, depends on the depth of + * the transmit buffer. + * + * We program the receive FIFO to notify us if at least two + * elements (one frame) have been written to the FIFO. We could + * make this value larger (and maybe we should), but this way + * data will be written to memory as soon as it's available. */ out_be32(&ssi->sfcsr, - CCSR_SSI_SFCSR_TFWM0(6) | CCSR_SSI_SFCSR_RFWM0(2)); + CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) | + CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2)); /* * We keep the SSI disabled because if we enable it, then the @@ -622,6 +632,7 @@ static int __devinit fsl_ssi_probe(struct of_device *of_dev, struct device_attribute *dev_attr = NULL; struct device_node *np = of_dev->dev.of_node; const char *p, *sprop; + const uint32_t *iprop; struct resource res; char name[64]; @@ -671,6 +682,16 @@ static int __devinit fsl_ssi_probe(struct of_device *of_dev, else ssi_private->cpu_dai_drv.symmetric_rates = 1; + /* Determine the FIFO depth. */ + iprop = of_get_property(np, "fsl,fifo-depth", NULL); + if (!iprop) { + dev_err(&of_dev->dev, "missing fsl,fifo-depth property in %s\n", + np->full_name); + ret = -ENODEV; + goto error; + } + ssi_private->fifo_depth = *iprop; + /* Initialize the the device_attribute structure */ dev_attr = &ssi_private->dev_attr; dev_attr->attr.name = "statistics"; -- 1.7.0.1

4 18

[alsa-devel] [PATCH 13/18] pcmcia: remove memreq_t
by Dominik Brodowski 06 Aug '10

06 Aug '10

Page already had to be set to 0; Offset can easily be passed as parameter to pcmcia_map_mem_page. CC: netdev(a)vger.kernel.org CC: linux-wireless(a)vger.kernel.org CC: linux-ide(a)vger.kernel.org CC: linux-usb(a)vger.kernel.org CC: laforge(a)gnumonks.org CC: linux-mtd(a)lists.infradead.org CC: linux-bluetooth(a)vger.kernel.org CC: alsa-devel(a)alsa-project.org CC: linux-serial(a)vger.kernel.org CC: Michael Buesch <mb(a)bu3sch.de> Signed-off-by: Dominik Brodowski <linux(a)dominikbrodowski.net> --- drivers/char/pcmcia/ipwireless/main.c | 14 ++------------ drivers/isdn/hisax/sedlbauer_cs.c | 7 +++---- drivers/mtd/maps/pcmciamtd.c | 13 ++++++------- drivers/net/pcmcia/fmvj18x_cs.c | 10 ++-------- drivers/net/pcmcia/ibmtr_cs.c | 11 +++-------- drivers/net/pcmcia/pcnet_cs.c | 14 ++++---------- drivers/net/pcmcia/smc91c92_cs.c | 9 +++------ drivers/net/pcmcia/xirc2ps_cs.c | 5 +---- drivers/net/wireless/airo_cs.c | 6 ++---- drivers/net/wireless/b43/pcmcia.c | 5 +---- drivers/net/wireless/ray_cs.c | 13 +++---------- drivers/pcmcia/pcmcia_resource.c | 9 +++------ drivers/scsi/pcmcia/nsp_cs.c | 5 ++--- drivers/staging/comedi/drivers/ni_daq_700.c | 6 ++---- drivers/staging/comedi/drivers/ni_daq_dio24.c | 6 ++---- drivers/staging/comedi/drivers/ni_labpc_cs.c | 6 ++---- include/pcmcia/cs.h | 6 ------ include/pcmcia/ds.h | 2 +- 18 files changed, 42 insertions(+), 105 deletions(-) diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 5f87b9f..6c4aa4b 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -84,8 +84,6 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, { struct ipw_dev *ipw = priv_data; struct resource *io_resource; - memreq_t memreq_attr_memory; - memreq_t memreq_common_memory; int ret; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; @@ -121,11 +119,8 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, if (ret != 0) goto exit1; - memreq_common_memory.CardOffset = cfg->mem.win[0].card_addr; - memreq_common_memory.Page = 0; - ret = pcmcia_map_mem_page(p_dev, ipw->handle_common_memory, - &memreq_common_memory); + cfg->mem.win[0].card_addr); if (ret != 0) goto exit2; @@ -150,12 +145,7 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, if (ret != 0) goto exit2; - memreq_attr_memory.CardOffset = 0; - memreq_attr_memory.Page = 0; - - ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory, - &memreq_attr_memory); - + ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory, 0); if (ret != 0) goto exit3; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 4755eb4..0b06dbb 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -232,7 +232,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, */ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; - memreq_t map; req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; req->Attributes |= WIN_ENABLE; req->Base = mem->win[0].host_addr; @@ -240,9 +239,9 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0) + + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr) != 0) return -ENODEV; } return 0; diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 7948816..f97463e 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -102,7 +102,7 @@ static caddr_t remap_window(struct map_info *map, unsigned long to) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; window_handle_t win = (window_handle_t)map->map_priv_2; - memreq_t mrq; + unsigned int offset; int ret; if (!pcmcia_dev_present(dev->p_dev)) { @@ -110,15 +110,14 @@ static caddr_t remap_window(struct map_info *map, unsigned long to) return 0; } - mrq.CardOffset = to & ~(dev->win_size-1); - if(mrq.CardOffset != dev->offset) { + offset = to & ~(dev->win_size-1); + if (offset != dev->offset) { DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x", - dev->offset, mrq.CardOffset); - mrq.Page = 0; - ret = pcmcia_map_mem_page(dev->p_dev, win, &mrq); + dev->offset, offset); + ret = pcmcia_map_mem_page(dev->p_dev, win, offset); if (ret != 0) return NULL; - dev->offset = mrq.CardOffset; + dev->offset = offset; } return dev->win_base + (to & (dev->win_size-1)); } diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 6993044..98fffb0 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -545,7 +545,6 @@ failed: static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) { win_req_t req; - memreq_t mem; u_char __iomem *base; int i, j; @@ -558,9 +557,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) return -1; base = ioremap(req.Base, req.Size); - mem.Page = 0; - mem.CardOffset = 0; - pcmcia_map_mem_page(link, link->win, &mem); + pcmcia_map_mem_page(link, link->win, 0); /* * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format @@ -594,7 +591,6 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) static int fmvj18x_setup_mfc(struct pcmcia_device *link) { win_req_t req; - memreq_t mem; int i; struct net_device *dev = link->priv; unsigned int ioaddr; @@ -614,9 +610,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link) return -1; } - mem.Page = 0; - mem.CardOffset = 0; - i = pcmcia_map_mem_page(link, link->win, &mem); + i = pcmcia_map_mem_page(link, link->win, 0); if (i != 0) { iounmap(lp->base); lp->base = NULL; diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index 3fd8595..c0b3cdd 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -211,7 +211,6 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) struct net_device *dev = info->dev; struct tok_info *ti = netdev_priv(dev); win_req_t req; - memreq_t mem; int i, ret; dev_dbg(&link->dev, "ibmtr_config\n"); @@ -250,9 +249,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) if (ret) goto failed; - mem.CardOffset = mmiobase; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, link->win, &mem); + ret = pcmcia_map_mem_page(link, link->win, mmiobase); if (ret) goto failed; ti->mmio = ioremap(req.Base, req.Size); @@ -267,13 +264,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) if (ret) goto failed; - mem.CardOffset = srambase; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, info->sram_win_handle, &mem); + ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase); if (ret) goto failed; - ti->sram_base = mem.CardOffset >> 12; + ti->sram_base = srambase >> 12; ti->sram_virt = ioremap(req.Base, req.Size); ti->sram_phys = req.Base; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 9c5fc9d..c3edfe4 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -301,7 +301,6 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) { struct net_device *dev = link->priv; win_req_t req; - memreq_t mem; u_char __iomem *base, *virt; int i, j; @@ -314,10 +313,8 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) return NULL; virt = ioremap(req.Base, req.Size); - mem.Page = 0; for (i = 0; i < NR_INFO; i++) { - mem.CardOffset = hw_info[i].offset & ~(req.Size-1); - pcmcia_map_mem_page(link, link->win, &mem); + pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1)); base = &virt[hw_info[i].offset & (req.Size-1)]; if ((readb(base+0) == hw_info[i].a0) && (readb(base+2) == hw_info[i].a1) && @@ -1463,7 +1460,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); win_req_t req; - memreq_t mem; int i, window_size, offset, ret; window_size = (stop_pg - start_pg) << 8; @@ -1482,11 +1478,9 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, if (ret) goto failed; - mem.CardOffset = (start_pg << 8) + cm_offset; - offset = mem.CardOffset % window_size; - mem.CardOffset -= offset; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, link->win, &mem); + offset = (start_pg << 8) + cm_offset; + offset -= offset % window_size; + ret = pcmcia_map_mem_page(link, link->win, offset); if (ret) goto failed; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index a5e4779..377367d 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -443,7 +443,7 @@ static int mhz_mfc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); win_req_t req; - memreq_t mem; + unsigned int offset; int i; link->conf.Attributes |= CONF_ENABLE_SPKR; @@ -467,11 +467,8 @@ static int mhz_mfc_config(struct pcmcia_device *link) return -ENODEV; smc->base = ioremap(req.Base, req.Size); - mem.CardOffset = mem.Page = 0; - if (smc->manfid == MANFID_MOTOROLA) - mem.CardOffset = link->conf.ConfigBase; - i = pcmcia_map_mem_page(link, link->win, &mem); - + offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0; + i = pcmcia_map_mem_page(link, link->win, offset); if ((i == 0) && (smc->manfid == MANFID_MEGAHERTZ) && (smc->cardid == PRODID_MEGAHERTZ_EM3288)) diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 8fb0eb1..4eb6f98 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -870,7 +870,6 @@ xirc2ps_config(struct pcmcia_device * link) if (local->dingo) { win_req_t req; - memreq_t mem; /* Reset the modem's BAR to the correct value * This is necessary because in the RequestConfiguration call, @@ -898,9 +897,7 @@ xirc2ps_config(struct pcmcia_device * link) goto config_error; local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; - mem.CardOffset = 0x0; - mem.Page = 0; - if ((err = pcmcia_map_mem_page(link, link->win, &mem))) + if ((err = pcmcia_map_mem_page(link, link->win, 0))) goto config_error; /* Setup the CCRs; there are no infos in the CIS about the Ethernet diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index d241b4a..d47672c 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -207,16 +207,14 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, */ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; - memreq_t map; req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; req->Base = mem->win[0].host_addr; req->Size = mem->win[0].len; req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr) != 0) return -ENODEV; } /* If we got this far, we're cool! */ diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 7c9af82..ffe1f89 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -64,7 +64,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) { struct ssb_bus *ssb; win_req_t win; - memreq_t mem; int err = -ENOMEM; int res = 0; @@ -87,9 +86,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) if (res != 0) goto err_kfree_ssb; - mem.CardOffset = 0; - mem.Page = 0; - res = pcmcia_map_mem_page(dev, dev->win, &mem); + res = pcmcia_map_mem_page(dev, dev->win, 0); if (res != 0) goto err_disable; diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index b83d5ef..7eb339a 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -393,7 +393,6 @@ static int ray_config(struct pcmcia_device *link) int ret = 0; int i; win_req_t req; - memreq_t mem; struct net_device *dev = (struct net_device *)link->priv; ray_dev_t *local = netdev_priv(dev); @@ -430,9 +429,7 @@ static int ray_config(struct pcmcia_device *link) ret = pcmcia_request_window(link, &req, &link->win); if (ret) goto failed; - mem.CardOffset = 0x0000; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, link->win, &mem); + ret = pcmcia_map_mem_page(link, link->win, 0); if (ret) goto failed; local->sram = ioremap(req.Base, req.Size); @@ -446,9 +443,7 @@ static int ray_config(struct pcmcia_device *link) ret = pcmcia_request_window(link, &req, &local->rmem_handle); if (ret) goto failed; - mem.CardOffset = 0x8000; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem); + ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000); if (ret) goto failed; local->rmem = ioremap(req.Base, req.Size); @@ -462,9 +457,7 @@ static int ray_config(struct pcmcia_device *link) ret = pcmcia_request_window(link, &req, &local->amem_handle); if (ret) goto failed; - mem.CardOffset = 0x0000; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, local->amem_handle, &mem); + ret = pcmcia_map_mem_page(link, local->amem_handle, 0); if (ret) goto failed; local->amem = ioremap(req.Base, req.Size); diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index a48d4a9..975baaa 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -193,7 +193,7 @@ EXPORT_SYMBOL(pcmcia_write_config_byte); int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh, - memreq_t *req) + unsigned int offset) { struct pcmcia_socket *s = p_dev->socket; int ret; @@ -201,12 +201,9 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh, wh--; if (wh >= MAX_WIN) return -EINVAL; - if (req->Page != 0) { - dev_dbg(&s->dev, "failure: requested page is zero\n"); - return -EINVAL; - } + mutex_lock(&s->ops_mutex); - s->win[wh].card_start = req->CardOffset; + s->win[wh].card_start = offset; ret = s->ops->set_mem_map(s, &s->win[wh]); if (ret) dev_warn(&s->dev, "failed to set_mem_map\n"); diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 8bb598b..dd9b403 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1661,7 +1661,6 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, } if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { - memreq_t map; cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; @@ -1673,8 +1672,8 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, cfg_mem->req.AccessSpeed = 0; if (pcmcia_request_window(p_dev, &cfg_mem->req, &p_dev->win) != 0) goto next_entry; - map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr) != 0) goto next_entry; cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size); diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 7e41ad9..abaa40b 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -556,7 +556,6 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { win_req_t *req = priv_data; - memreq_t map; if (cfg->index == 0) return -ENODEV; @@ -602,9 +601,8 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win)) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map)) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr)) return -ENODEV; } /* If we got this far, we're cool! */ diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index b2483f8..caccece 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -308,7 +308,6 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { win_req_t *req = priv_data; - memreq_t map; if (cfg->index == 0) return -ENODEV; @@ -354,9 +353,8 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win)) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map)) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr)) return -ENODEV; } /* If we got this far, we're cool! */ diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index c1444b4..94d9f7f 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -286,7 +286,6 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { win_req_t *req = priv_data; - memreq_t map; if (cfg->index == 0) return -ENODEV; @@ -332,9 +331,8 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win)) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map)) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr)) return -ENODEV; } /* If we got this far, we're cool! */ diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index 583a4e3..e4faf44 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -68,12 +68,6 @@ typedef struct config_req_t { #define PRESENT_IOBASE_3 0x100 #define PRESENT_IOSIZE 0x200 -/* For GetMemPage, MapMemPage */ -typedef struct memreq_t { - u_int CardOffset; - u_short Page; -} memreq_t; - /* For RequestWindow */ typedef struct win_req_t { u_int Attributes; diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 0748bec..a2bf3a7 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -202,7 +202,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_handle_t *wh); int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t win); int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win, - memreq_t *req); + unsigned int offset); int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod); void pcmcia_disable_device(struct pcmcia_device *p_dev); -- 1.7.0.4

1 0

[alsa-devel] [PATCH 11/18] pcmcia: do not use io_req_t when calling pcmcia_request_io()
by Dominik Brodowski 06 Aug '10

06 Aug '10

Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev(a)vger.kernel.org CC: linux-wireless(a)vger.kernel.org CC: linux-ide(a)vger.kernel.org CC: linux-usb(a)vger.kernel.org CC: laforge(a)gnumonks.org CC: linux-mtd(a)lists.infradead.org CC: alsa-devel(a)alsa-project.org CC: linux-serial(a)vger.kernel.org CC: Michael Buesch <mb(a)bu3sch.de> Acked-by: Marcel Holtmann <marcel(a)holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux(a)dominikbrodowski.net> --- Documentation/pcmcia/driver-changes.txt | 7 ++++ drivers/ata/pata_pcmcia.c | 29 ++++++++------- drivers/bluetooth/bluecard_cs.c | 13 +++---- drivers/bluetooth/bt3c_cs.c | 18 +++++----- drivers/bluetooth/btuart_cs.c | 18 +++++----- drivers/bluetooth/dtl1_cs.c | 21 +++++------ drivers/char/pcmcia/cm4000_cs.c | 17 +++------ drivers/char/pcmcia/cm4040_cs.c | 20 +++------- drivers/char/pcmcia/ipwireless/main.c | 10 +++--- drivers/char/pcmcia/synclink_cs.c | 21 +++++------ drivers/ide/ide-cs.c | 30 ++++++++------- drivers/isdn/hardware/avm/avm_cs.c | 15 +++----- drivers/isdn/hisax/avma1_cs.c | 20 ++++------ drivers/isdn/hisax/elsa_cs.c | 15 ++++---- drivers/isdn/hisax/sedlbauer_cs.c | 28 +++++++-------- drivers/isdn/hisax/teles_cs.c | 15 ++++---- drivers/net/pcmcia/3c574_cs.c | 11 +++--- drivers/net/pcmcia/3c589_cs.c | 11 +++--- drivers/net/pcmcia/axnet_cs.c | 40 +++++++++++---------- drivers/net/pcmcia/com20020_cs.c | 19 ++++++---- drivers/net/pcmcia/fmvj18x_cs.c | 31 ++++++++-------- drivers/net/pcmcia/ibmtr_cs.c | 14 ++++---- drivers/net/pcmcia/nmclan_cs.c | 8 ++-- drivers/net/pcmcia/pcnet_cs.c | 40 +++++++++++---------- drivers/net/pcmcia/smc91c92_cs.c | 43 +++++++++++----------- drivers/net/pcmcia/xirc2ps_cs.c | 34 +++++++++--------- drivers/net/wireless/airo_cs.c | 22 +++++------ drivers/net/wireless/atmel_cs.c | 22 +++++------ drivers/net/wireless/b43/pcmcia.c | 4 -- drivers/net/wireless/hostap/hostap_cs.c | 28 ++++++--------- drivers/net/wireless/libertas/if_cs.c | 8 ++-- drivers/net/wireless/orinoco/orinoco_cs.c | 24 ++++++------- drivers/net/wireless/orinoco/spectrum_cs.c | 24 ++++++------- drivers/net/wireless/ray_cs.c | 5 +-- drivers/net/wireless/wl3501_cs.c | 12 +++--- drivers/parport/parport_cs.c | 16 ++++---- drivers/pcmcia/pcmcia_resource.c | 37 +++++-------------- drivers/scsi/pcmcia/aha152x_stub.c | 14 ++++---- drivers/scsi/pcmcia/fdomain_stub.c | 10 +++--- drivers/scsi/pcmcia/nsp_cs.c | 30 +++++++-------- drivers/scsi/pcmcia/qlogic_stub.c | 14 ++++---- drivers/scsi/pcmcia/sym53c500_cs.c | 14 ++++---- drivers/serial/serial_cs.c | 37 ++++++++++--------- drivers/staging/comedi/drivers/cb_das16_cs.c | 24 ++++++------- drivers/staging/comedi/drivers/das08_cs.c | 23 ++++++------ drivers/staging/comedi/drivers/ni_daq_700.c | 24 ++++++------- drivers/staging/comedi/drivers/ni_daq_dio24.c | 24 ++++++------- drivers/staging/comedi/drivers/ni_labpc_cs.c | 24 ++++++------- drivers/staging/comedi/drivers/ni_mio_cs.c | 13 +++---- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 24 ++++++------- drivers/staging/wlags49_h2/wl_cs.c | 8 ++-- drivers/telephony/ixj_pcmcia.c | 16 ++++---- drivers/usb/host/sl811_cs.c | 12 +++--- include/pcmcia/cs.h | 17 --------- include/pcmcia/ds.h | 21 ++++++++++- sound/pcmcia/pdaudiocf/pdaudiocf.c | 6 ++-- sound/pcmcia/vx/vxpocket.c | 6 ++-- 57 files changed, 527 insertions(+), 584 deletions(-) diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index ff5f0be..26c0f9c 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,4 +1,11 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* pcmcia_request_io changes (as of 2.6.36) + Instead of io_req_t, drivers are now requested to fill out + struct pcmcia_device *p_dev->resource[0,1] for up to two ioport + ranges. After a call to pcmcia_request_io(), the ports found there + are reserved, after calling pcmcia_request_configuration(), they may + be used. + * No dev_info_t, no cs_types.h (as of 2.6.36) dev_info_t and a few other typedefs are removed. No longer use them in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 1fcd065..e944aa0 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -200,21 +200,23 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + pdev->resource[0]->start = io->win[0].base; + if (!(io->flags & CISTPL_IO_16BIT)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + } if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = 8; + pdev->resource[1]->start = io->win[1].base; + pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = io->win[0].len; + pdev->resource[1]->end = 0; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[0]->start + 0x0e; } else @@ -245,9 +247,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) struct ata_port_operations *ops = &pcmcia_port_ops; /* Set up attributes in order to probe card and get resources */ - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - pdev->io.IOAddrLines = 3; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; pdev->conf.Attributes = CONF_ENABLE_IRQ; pdev->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 24d2007..d52e90a 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -865,9 +865,6 @@ static int bluecard_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; - link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -890,12 +887,14 @@ static int bluecard_config(struct pcmcia_device *link) int i, n; link->conf.ConfigIndex = 0x20; - link->io.NumPorts1 = 64; - link->io.IOAddrLines = 6; + + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 64; + link->io_lines = 6; for (n = 0; n < 0x400; n += 0x40) { - link->io.BasePort1 = n ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = n ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 8ab494c..7ab8f29 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -657,8 +657,8 @@ static int bt3c_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -683,14 +683,14 @@ static int bt3c_check_config(struct pcmcia_device *p_dev, { unsigned long try = (unsigned long) priv_data; + p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = (try == 0) ? 16 : - cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -707,9 +707,9 @@ static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { for (j = 0; j < 5; j++) { - p_dev->io.BasePort1 = base[j]; - p_dev->io.IOAddrLines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 7e770d4..1c4f5e8 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -586,8 +586,8 @@ static int btuart_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -612,14 +612,14 @@ static int btuart_check_config(struct pcmcia_device *p_dev, { int *try = priv_data; + p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = (*try == 0) ? 16 : - cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -636,9 +636,9 @@ static int btuart_check_config_notpicky(struct pcmcia_device *p_dev, if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { for (j = 0; j < 5; j++) { - p_dev->io.BasePort1 = base[j]; - p_dev->io.IOAddrLines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index bfe9313..18ecc57 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -572,8 +572,8 @@ static int dtl1_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -597,14 +597,13 @@ static int dtl1_confcheck(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */ - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) - return 0; - } - return -ENODEV; + if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8)) + return -ENODEV; + + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[0]->end = cf->io.win[0].len; /*yo */ + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + return pcmcia_request_io(p_dev); } static int dtl1_config(struct pcmcia_device *link) @@ -613,7 +612,7 @@ static int dtl1_config(struct pcmcia_device *link) int i; /* Look for a generic full-sized window */ - link->io.NumPorts1 = 8; + link->resource[0]->end = 8; if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0) goto failed; diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 18484ed..ec73d9f 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1751,17 +1751,12 @@ static int cm4000_config_check(struct pcmcia_device *p_dev, if (!cfg->io.nwin) return -ENODEV; - /* Get the IOaddr */ - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(cfg->io.flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(cfg->io.flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + return pcmcia_request_io(p_dev); } static int cm4000_config(struct pcmcia_device * link, int devno) diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index a6bbf19..815cde1 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -527,16 +527,12 @@ static int cm4040_config_check(struct pcmcia_device *p_dev, return -ENODEV; /* Get the IOaddr */ - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(cfg->io.flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(cfg->io.flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - - rc = pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + rc = pcmcia_request_io(p_dev); + dev_printk(KERN_INFO, &p_dev->dev, "pcmcia_request_io returned 0x%x\n", rc); return rc; @@ -548,10 +544,6 @@ static int reader_config(struct pcmcia_device *link, int devno) struct reader_dev *dev; int fail_rc; - link->io.BasePort2 = 0; - link->io.NumPorts2 = 0; - link->io.Attributes2 = 0; - if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 9467994..5f87b9f 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -88,15 +88,15 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, memreq_t memreq_common_memory; int ret; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.IOAddrLines = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; /* 0x40 causes it to generate level mode interrupts. */ /* 0x04 enables IREQ pin. */ p_dev->conf.ConfigIndex = cfg->index | 0x44; - ret = pcmcia_request_io(p_dev, &p_dev->io); + p_dev->io_lines = 16; + ret = pcmcia_request_io(p_dev); if (ret) return ret; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 8ded9b0..9ecd6be 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -571,18 +571,15 @@ static int mgslpc_ioprobe(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - if (cfg->io.nwin > 0) { - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(cfg->io.flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(cfg->io.flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - return pcmcia_request_io(p_dev, &p_dev->io); - } - return -ENODEV; + if (!cfg->io.nwin) + return -ENODEV; + + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + return pcmcia_request_io(p_dev); } static int mgslpc_config(struct pcmcia_device *link) diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 6be0e5f..2a4cb9c 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -97,9 +97,8 @@ static int ide_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = 3; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -228,22 +227,25 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + pdev->conf.ConfigIndex = cfg->index; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + pdev->resource[0]->start = io->win[0].base; + if (!(io->flags & CISTPL_IO_16BIT)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + } if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = 8; + pdev->resource[1]->start = io->win[1].base; + pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = io->win[0].len; + pdev->resource[1]->end = 0; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[0]->start + 0x0e; } else diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 7c8c51f..09b1795 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -75,9 +75,8 @@ static int avmcs_probe(struct pcmcia_device *p_dev) { /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -119,13 +118,9 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev, if (cf->io.nwin <= 0) return -ENODEV; - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.NumPorts1 = cf->io.win[0].len; - p_dev->io.NumPorts2 = 0; - printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n", - p_dev->io.BasePort1, - p_dev->io.BasePort1+p_dev->io.NumPorts1-1); - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[0]->end = cf->io.win[0].len; + return pcmcia_request_io(p_dev); } static int avmcs_config(struct pcmcia_device *link) diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 8889963..94263c2 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -78,11 +78,10 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "avma1cs_attach()\n"); /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts2 = 16; - p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->end = 16; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -126,13 +125,10 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev, if (cf->io.nwin <= 0) return -ENODEV; - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.NumPorts1 = cf->io.win[0].len; - p_dev->io.NumPorts2 = 0; - printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n", - p_dev->io.BasePort1, - p_dev->io.BasePort1+p_dev->io.NumPorts1-1); - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[0]->end = cf->io.win[0].len; + p_dev->io_lines = 5; + return pcmcia_request_io(p_dev); } diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index c10bfd3..b3c08aa 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -126,9 +126,8 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) and attributes of IO windows) are fixed by the nature of the device, and can be hard-wired here. */ - link->io.NumPorts1 = 8; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 3; + link->resource[0]->end = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -173,16 +172,18 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev, { int j; + p_dev->io_lines = 3; + if ((cf->io.nwin > 0) && cf->io.win[0].base) { printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n"); - p_dev->io.BasePort1 = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } else { printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n"); for (j = 0x2f0; j > 0x100; j -= 0x10) { - p_dev->io.BasePort1 = j; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = j; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index cecb35a..4755eb4 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -129,9 +129,8 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) /* from old sedl_cs */ /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 8; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = 3; + link->resource[0]->end = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = 0; link->conf.IntType = INT_MEMORY_AND_IO; @@ -201,23 +200,22 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + p_dev->io_lines = 3; + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 3787fc7..7296102 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -106,9 +106,8 @@ static int __devinit teles_probe(struct pcmcia_device *link) and attributes of IO windows) are fixed by the nature of the device, and can be hard-wired here. */ - link->io.NumPorts1 = 96; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 96; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -153,16 +152,18 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev, { int j; + p_dev->io_lines = 5; + if ((cf->io.nwin > 0) && cf->io.win[0].base) { printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); - p_dev->io.BasePort1 = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } else { printk(KERN_INFO "(teles_cs: looks like the 97 model)\n"); for (j = 0x2f0; j > 0x100; j -= 0x10) { - p_dev->io.BasePort1 = j; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = j; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index b5ea9b8..c683f77 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -278,8 +278,8 @@ static int tc574_probe(struct pcmcia_device *link) lp->p_dev = link; spin_lock_init(&lp->window_lock); - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -337,10 +337,11 @@ static int tc574_config(struct pcmcia_device *link) dev_dbg(&link->dev, "3c574_config()\n"); - link->io.IOAddrLines = 16; + link->io_lines = 16; + for (i = j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 122ef4a..61f9cf2 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -213,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link) lp->p_dev = link; spin_lock_init(&lp->lock); - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -277,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link) "3Com card??\n"); multi = (link->card_id == PRODID_3COM_3C562); + link->io_lines = 16; + /* For the 3c562, the base address must be xx00-xx7f */ - link->io.IOAddrLines = 16; for (i = j = 0; j < 0x400; j += 0x10) { if (multi && (j & 0x80)) continue; - link->io.BasePort1 = j ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index c52fdf3..5f05ffb 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -259,28 +259,30 @@ static int get_prom(struct pcmcia_device *link) static int try_io_port(struct pcmcia_device *link) { int j, ret; - if (link->io.NumPorts1 == 32) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + if (link->resource[0]->end == 32) { + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* for master/slave multifunction cards */ - if (link->io.NumPorts2 > 0) - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + if (link->resource[1]->end > 0) + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } else { /* This should be two 16-port windows */ - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } - if (link->io.BasePort1 == 0) { - link->io.IOAddrLines = 16; + if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - link->io.BasePort2 = (j ^ 0x300) + 0x10; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + link->resource[1]->start = (j ^ 0x300) + 0x10; + link->io_lines = 16; + ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { - return pcmcia_request_io(link, &link->io); + return pcmcia_request_io(link); } } @@ -301,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev, network function with window 0, and serial with window 1 */ if (io->nwin > 1) { i = (io->win[1].len > io->win[0].len); - p_dev->io.BasePort2 = io->win[1-i].base; - p_dev->io.NumPorts2 = io->win[1-i].len; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; } else { - i = p_dev->io.NumPorts2 = 0; + i = p_dev->resource[1]->end = 0; } - p_dev->io.BasePort1 = io->win[i].base; - p_dev->io.NumPorts1 = io->win[i].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); return -ENODEV; diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 3b53818..3c400cf 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -158,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev) /* fill in our module parameters as defaults */ dev->dev_addr[0] = node; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts1 = 16; - p_dev->io.IOAddrLines = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -245,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link) dev_dbg(&link->dev, "com20020_config\n"); - dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1); + dev_dbg(&link->dev, "baseport1 is %Xh\n", + (unsigned int) link->resource[0]->start); + i = -ENODEV; - if (!link->io.BasePort1) + link->io_lines = 16; + + if (!link->resource[0]->start) { for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) { - link->io.BasePort1 = ioaddr; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = ioaddr; + i = pcmcia_request_io(link); if (i == 0) break; } } else - i = pcmcia_request_io(link, &link->io); + i = pcmcia_request_io(link); if (i != 0) { diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index bba6369..6993044 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -248,9 +248,8 @@ static int fmvj18x_probe(struct pcmcia_device *link) lp->base = NULL; /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; @@ -288,13 +287,13 @@ static int mfc_try_io_port(struct pcmcia_device *link) { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; for (i = 0; i < 5; i++) { - link->io.BasePort2 = serial_base[i]; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - if (link->io.BasePort2 == 0) { - link->io.NumPorts2 = 0; + link->resource[1]->start = serial_base[i]; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + if (link->resource[1]->start == 0) { + link->resource[1]->end = 0; printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n"); } - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret == 0) return ret; } @@ -310,8 +309,8 @@ static int ungermann_try_io_port(struct pcmcia_device *link) 0x380,0x3c0 only for ioport. */ for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) { - link->io.BasePort1 = ioaddr; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = ioaddr; + ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ link->conf.ConfigIndex = @@ -345,6 +344,8 @@ static int fmvj18x_config(struct pcmcia_device *link) dev_dbg(&link->dev, "fmvj18x_config\n"); + link->io_lines = 5; + len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); kfree(buf); @@ -363,20 +364,20 @@ static int fmvj18x_config(struct pcmcia_device *link) /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; @@ -417,14 +418,14 @@ static int fmvj18x_config(struct pcmcia_device *link) } } - if (link->io.NumPorts2 != 0) { + if (link->resource[1]->end != 0) { ret = mfc_try_io_port(link); if (ret != 0) goto failed; } else if (cardtype == UNGERMANN) { ret = ungermann_try_io_port(link); if (ret != 0) goto failed; } else { - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; } diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index e99abaa..3fd8595 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -151,9 +151,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->priv = info; info->ti = netdev_priv(dev); - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 4; - link->io.IOAddrLines = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 4; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -218,16 +217,17 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_config\n"); link->conf.ConfigIndex = 0x61; + link->io_lines = 16; /* Determine if this is PRIMARY or ALTERNATE. */ /* Try PRIMARY card at 0xA20-0xA23 */ - link->io.BasePort1 = 0xA20; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = 0xA20; + i = pcmcia_request_io(link); if (i != 0) { /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */ - link->io.BasePort1 = 0xA24; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = 0xA24; + ret = pcmcia_request_io(link); if (ret) goto failed; } diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 9980cbb..68f2dee 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -458,9 +458,8 @@ static int nmclan_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&lp->bank_lock); - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -644,7 +643,8 @@ static int nmclan_config(struct pcmcia_device *link) dev_dbg(&link->dev, "nmclan_config\n"); - ret = pcmcia_request_io(link, &link->io); + link->io_lines = 5; + ret = pcmcia_request_io(link); if (ret) goto failed; ret = pcmcia_request_exclusive_irq(link, mace_interrupt); diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index c9cd237..9c5fc9d 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -477,29 +477,31 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) static int try_io_port(struct pcmcia_device *link) { int j, ret; - if (link->io.NumPorts1 == 32) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (link->io.NumPorts2 > 0) { + link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + if (link->resource[0]->end == 32) { + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + if (link->resource[1]->end > 0) { /* for master/slave multifunction cards */ - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } } else { /* This should be two 16-port windows */ - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } - if (link->io.BasePort1 == 0) { - link->io.IOAddrLines = 16; + if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - link->io.BasePort2 = (j ^ 0x300) + 0x10; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + link->resource[1]->start = (j ^ 0x300) + 0x10; + link->io_lines = 16; + ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { - return pcmcia_request_io(link, &link->io); + return pcmcia_request_io(link); } } @@ -520,18 +522,18 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev, network function with window 0, and serial with window 1 */ if (io->nwin > 1) { i = (io->win[1].len > io->win[0].len); - p_dev->io.BasePort2 = io->win[1-i].base; - p_dev->io.NumPorts2 = io->win[1-i].len; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; } else { - i = p_dev->io.NumPorts2 = 0; + i = p_dev->resource[1]->end = 0; } *has_shmem = ((cfg->mem.nwin == 1) && (cfg->mem.win[0].len >= 0x4000)); - p_dev->io.BasePort1 = io->win[i].base; - p_dev->io.NumPorts1 = io->win[i].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); return 0; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 1b0b323..a5e4779 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -324,9 +324,8 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 4; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -427,12 +426,13 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->io.BasePort2 = cf->io.win[0].base; + p_dev->resource[1]->start = cf->io.win[0].base; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; - p_dev->io.BasePort1 = k ^ 0x300; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = k ^ 0x300; + p_dev->io_lines = 16; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -448,9 +448,8 @@ static int mhz_mfc_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->io.IOAddrLines = 16; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts2 = 8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -601,9 +600,9 @@ static int smc_configcheck(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + return pcmcia_request_io(p_dev); } static int smc_config(struct pcmcia_device *link) @@ -611,7 +610,7 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->io.NumPorts1 = 16; + link->resource[0]->end = 16; i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -646,25 +645,25 @@ static int osi_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->io.NumPorts1 = 64; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts2 = 8; - link->io.IOAddrLines = 16; + link->resource[0]->end = 64; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ link->conf.ConfigIndex = 0x23; + link->io_lines = 16; for (i = j = 0; j < 4; j++) { - link->io.BasePort2 = com[j]; - i = pcmcia_request_io(link, &link->io); + link->resource[1]->start = com[j]; + i = pcmcia_request_io(link); if (i == 0) break; } if (i != 0) { /* Fallback: turn off hard decode */ link->conf.ConfigIndex = 0x03; - link->io.NumPorts2 = 0; - i = pcmcia_request_io(link, &link->io); + link->resource[1]->end = 0; + i = pcmcia_request_io(link); } dev->base_addr = link->resource[0]->start + 0x10; return i; @@ -803,7 +802,7 @@ static int check_sig(struct pcmcia_device *link) } /* Try setting bus width */ - width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO); + width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO); s = inb(ioaddr + CONFIG); if (width) s |= CFG_16BIT; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 034920b..8fb0eb1 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -677,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev, if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = ioaddr; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) return 0; } } @@ -696,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev, int *pass = priv_data; if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = p_dev->io.BasePort2 + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = p_dev->resource[1]->start + (*pass ? (cf->index & 0x20 ? -24:8) : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev, &p_dev->io)) + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -807,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->io.IOAddrLines =10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; if (local->modem) { int pass; @@ -816,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status |= CCSR_AUDIO_ENA; } - link->io.NumPorts2 = 8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->io.NumPorts1 = 16; /* no Mako stuff anymore */ + link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->io.NumPorts1 = 18; + link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for @@ -840,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { - link->io.NumPorts1 = 16; + link->io_lines = 10; + link->resource[0]->end = 16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - link->io.BasePort1 = ioaddr; - if (!(err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = ioaddr; + if (!(err = pcmcia_request_io(link))) goto port_found; } - link->io.BasePort1 = 0; /* let CS decide */ - if ((err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = 0; /* let CS decide */ + if ((err = pcmcia_request_io(link))) goto config_error; } port_found: diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index b7e7f50..d241b4a 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -175,25 +175,23 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; /* diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 65b3aed..3b63216 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -190,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int atmel_config(struct pcmcia_device *link) diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index f71bc78..7c9af82 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -77,10 +77,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) dev->conf.Attributes = CONF_ENABLE_IRQ; dev->conf.IntType = INT_MEMORY_AND_IO; - dev->io.BasePort2 = 0; - dev->io.NumPorts2 = 0; - dev->io.Attributes2 = 0; - win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 4e13ced..ba54d1b 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -519,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev, PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " "dflt->io.nwin=%d\n", cfg->io.nwin, dflt->io.nwin); - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, " - "io.base=0x%04x, len=%d\n", io->flags, - io->win[0].base, io->win[0].len); - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & - CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int prism2_config(struct pcmcia_device *link) diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index be4c475..9c29839 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -801,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; /* Do we need to allocate an interrupt? */ p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -815,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int if_cs_probe(struct pcmcia_device *p_dev) diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 6d514b5..ef46a2d 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -191,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } return 0; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 4f8f55e..873877e 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -253,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } return 0; diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 165beb6..b83d5ef 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -315,9 +315,8 @@ static int ray_probe(struct pcmcia_device *p_dev) local->finder = p_dev; /* The io structure describes IO port mapping. None used here */ - p_dev->io.NumPorts1 = 0; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 0; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a32f220..a1cc2d4 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1884,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev) struct wl3501_card *this; /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -1932,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link) /* Try allocating IO ports. This tries a few fixed addresses. If you * want, you can also read the card's config table to pick addresses -- * see the serial driver for an example. */ + link->io_lines = 5; for (j = 0x280; j < 0x400; j += 0x20) { /* The '^0x300' is so that we probe 0x300-0x3ff first, then * 0x200-0x2ff, and so on, because this seems safer */ - link->io.BasePort1 = j; - link->io.BasePort2 = link->io.BasePort1 + 0x10; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j; + link->resource[1]->start = link->resource[0]->start + 0x10; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index fc1639c..23e50f4 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -101,8 +101,8 @@ static int parport_probe(struct pcmcia_device *link) link->priv = info; info->p_dev = link; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -143,16 +143,16 @@ static int parport_config_check(struct pcmcia_device *p_dev, { if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; if (epp_mode) p_dev->conf.ConfigIndex |= FORCE_EPP_MODE; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin == 2) { - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; return 0; } diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index fcd48da..a48d4a9 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -70,7 +70,8 @@ static int alloc_io_space(struct pcmcia_socket *s, struct resource *res, res->flags |= IORESOURCE_IO; - dev_dbg(&s->dev, "alloc_io_space request for %pR\n", res); + dev_dbg(&s->dev, "alloc_io_space request for %pR, %d lines\n", + res, lines); align = base ? (lines ? 1<<lines : 0) : 1; if (align && (align < num)) { @@ -541,38 +542,25 @@ EXPORT_SYMBOL(pcmcia_request_configuration); * pcmcia_request_io() - attempt to reserve port ranges for PCMCIA devices * * pcmcia_request_io() attepts to reserve the IO port ranges specified in - * struct pcmcia_device *p_dev->resource[0] and *p_dev->resource[1]. The + * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The * "start" value is the requested start of the IO port resource; "end" - * relfects the number of ports requested. - * - * If io_req_t is passed, those values are converted automatically. + * reflects the number of ports requested. The number of IO lines requested + * is specified in &struct pcmcia_device @p_dev->io_lines. */ -int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) +int pcmcia_request_io(struct pcmcia_device *p_dev) { struct pcmcia_socket *s = p_dev->socket; - config_t *c; + config_t *c = p_dev->function_config; int ret = -EINVAL; - unsigned int lines = req->IOAddrLines; mutex_lock(&s->ops_mutex); + dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]); if (!(s->state & SOCKET_PRESENT)) { dev_dbg(&s->dev, "pcmcia_request_io: No card present\n"); goto out; } - c = p_dev->function_config; - if (req) { - c->io[0].start = req->BasePort1; - c->io[0].end = req->NumPorts1; - c->io[0].flags |= req->Attributes1; - c->io[1].start = req->BasePort2; - c->io[1].end = req->NumPorts2; - c->io[1].flags |= req->Attributes2; - } - - dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]); - if (c->state & CONFIG_LOCKED) { dev_dbg(&s->dev, "Configuration is locked\n"); goto out; @@ -582,12 +570,12 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) goto out; } - ret = alloc_io_space(s, &c->io[0], lines); + ret = alloc_io_space(s, &c->io[0], p_dev->io_lines); if (ret) goto out; if (c->io[1].end) { - ret = alloc_io_space(s, &c->io[1], lines); + ret = alloc_io_space(s, &c->io[1], p_dev->io_lines); if (ret) { release_io_space(s, &c->io[0]); goto out; @@ -598,11 +586,6 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) c->state |= CONFIG_IO_REQ; p_dev->_io = 1; - if (!ret) { - req->BasePort1 = c->io[0].start; - req->BasePort2 = c->io[1].start; - } - dev_dbg(&s->dev, "pcmcia_request_io succeeded: %pR , %pR", &c->io[0], &c->io[1]); out: diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 3e040f5..61f49bd 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -100,9 +100,8 @@ static int aha152x_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x20; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 0x20; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -130,15 +129,16 @@ static int aha152x_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { + p_dev->io_lines = 10; /* For New Media T&J, look for a SCSI window */ if (cfg->io.win[0].len >= 0x20) - p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->resource[0]->start = cfg->io.win[0].base; else if ((cfg->io.nwin > 1) && (cfg->io.win[1].len >= 0x20)) - p_dev->io.BasePort1 = cfg->io.win[1].base; + p_dev->resource[0]->start = cfg->io.win[1].base; if ((cfg->io.nwin > 0) && - (p_dev->io.BasePort1 < 0xffff)) { - if (!pcmcia_request_io(p_dev, &p_dev->io)) + (p_dev->resource[0]->start < 0xffff)) { + if (!pcmcia_request_io(p_dev)) return 0; } return -EINVAL; diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 49a9a0a..13dbe5c 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -83,9 +83,8 @@ static int fdomain_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 0x10; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -112,8 +111,9 @@ static int fdomain_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + return pcmcia_request_io(p_dev); } diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index d929891..8bb598b 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1558,9 +1558,8 @@ static int nsp_cs_probe(struct pcmcia_device *link) nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; /* not used */ + link->resource[0]->end = 0x10; + link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; @@ -1641,24 +1640,23 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = + p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 4e2b83f..eb775f1 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -156,9 +156,8 @@ static int qlogic_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -185,13 +184,14 @@ static int qlogic_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int qlogic_config(struct pcmcia_device * link) diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index d99c0cb..321e390 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -690,13 +690,14 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int @@ -858,9 +859,8 @@ SYM53C500_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index fe7adcd..141c695 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -335,8 +335,8 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; if (do_sound) { link->conf.Attributes |= CONF_ENABLE_SPKR; @@ -424,12 +424,13 @@ static int simple_config_check(struct pcmcia_device *p_dev, p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->io_lines = ((*try & 0x1) == 0) ? + 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) && (cf->io.win[0].base != 0)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } return -EINVAL; @@ -446,9 +447,9 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev, if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { for (j = 0; j < 5; j++) { - p_dev->io.BasePort1 = base[j]; - p_dev->io.IOAddrLines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) return 0; } } @@ -521,9 +522,9 @@ static int multi_config_check(struct pcmcia_device *p_dev, /* The quad port cards have bad CIS's, so just look for a window larger than 8 ports and assume it will be right */ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) { + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev)) { *base2 = p_dev->resource[0]->start + 8; return 0; } @@ -540,10 +541,10 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev, int *base2 = priv_data; if (cf->io.nwin == 2) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.BasePort2 = cf->io.win[1].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) { + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[1]->start = cf->io.win[1].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev)) { *base2 = p_dev->resource[1]->start; return 0; } @@ -557,10 +558,10 @@ static int multi_config(struct pcmcia_device *link) int i, base2 = 0; /* First, look for a generic full-sized window */ - link->io.NumPorts1 = info->multi * 8; + link->resource[0]->end = info->multi * 8; if (pcmcia_loop_config(link, multi_config_check, &base2)) { /* If that didn't work, look for two windows */ - link->io.NumPorts1 = link->io.NumPorts2 = 8; + link->resource[0]->end = link->resource[1]->end = 8; info->multi = 2; if (pcmcia_loop_config(link, multi_config_check_notpicky, &base2)) { diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 208f1b7..7cf0ccb 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -736,24 +736,22 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } return 0; diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index c4cfcff..9ee677f 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -224,24 +224,23 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } return 0; } diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 6d56957..7e41ad9 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -571,24 +571,22 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 29e1daf..b2483f8 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -323,24 +323,22 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index fb10987..c1444b4 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -301,24 +301,22 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index f37dc22..d50b6c4 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -264,8 +264,8 @@ static const dev_info_t dev_info = "ni_mio_cs"; static int cs_attach(struct pcmcia_device *link) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -310,13 +310,12 @@ static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, { int base, ret; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; for (base = 0x000; base < 0x400; base += 0x20) { - p_dev->io.BasePort1 = base; - ret = pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = base; + ret = pcmcia_request_io(p_dev); if (!ret) return 0; } diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index 80b8d57..25f4e67 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -1102,26 +1102,24 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static void daqp_cs_config(struct pcmcia_device *link) diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 2361537..f15afd2 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -145,9 +145,8 @@ static int wl_adapter_attach(struct pcmcia_device *link) return -ENOMEM; } - link->io.NumPorts1 = HCF_NUM_IO_PORTS; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - link->io.IOAddrLines = 6; + link->resource[0]->end = HCF_NUM_IO_PORTS; + link->resource[0]->flags = IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 5; @@ -305,8 +304,9 @@ void wl_adapter_insert( struct pcmcia_device *link ) /* Do we need to allocate an interrupt? */ link->conf.Attributes |= CONF_ENABLE_IRQ; + link->io_lines = 6; - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret != 0) goto failed; diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index a801036..a1900e5 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -32,9 +32,8 @@ static int ixj_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "ixj_attach()\n"); /* Create new ixj device */ - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 3; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL); if (!p_dev->priv) { @@ -120,13 +119,14 @@ static int ixj_config_check(struct pcmcia_device *p_dev, { if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; + p_dev->io_lines = 3; if (io->nwin == 2) { - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } - if (!pcmcia_request_io(p_dev, &p_dev->io)) + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 22e04f2..0e13a00 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -162,16 +162,16 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } pcmcia_disable_device(p_dev); return -ENODEV; diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index 0cd8c70..ad71bb5 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -56,23 +56,6 @@ typedef struct config_req_t { #define INT_CARDBUS 0x04 #define INT_ZOOMED_VIDEO 0x08 -/* For RequestIO and ReleaseIO */ -typedef struct io_req_t { - u_int BasePort1; - u_int NumPorts1; - u_int Attributes1; - u_int BasePort2; - u_int NumPorts2; - u_int Attributes2; - u_int IOAddrLines; -} io_req_t; - -/* Attributes for RequestIO and ReleaseIO */ -#define IO_DATA_PATH_WIDTH 0x18 -#define IO_DATA_PATH_WIDTH_8 0x00 -#define IO_DATA_PATH_WIDTH_16 0x08 -#define IO_DATA_PATH_WIDTH_AUTO 0x10 - /* Bits in IRQInfo1 field */ #define IRQ_NMI_ID 0x01 #define IRQ_IOCK_ID 0x02 diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 3dafd7d..0748bec 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -80,7 +80,6 @@ struct pcmcia_device { struct list_head socket_device_list; /* deprecated, will be cleaned up soon */ - io_req_t io; config_req_t conf; window_handle_t win; @@ -88,6 +87,8 @@ struct pcmcia_device { unsigned int irq; struct resource *resource[MAX_IO_WIN]; + unsigned int io_lines; /* number of I/O lines */ + /* Is the device suspended? */ u16 suspended:1; @@ -179,7 +180,7 @@ int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val); int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val); /* device configuration */ -int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req); +int pcmcia_request_io(struct pcmcia_device *p_dev); int __must_check __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, @@ -206,6 +207,22 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win, int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod); void pcmcia_disable_device(struct pcmcia_device *p_dev); +/* IO ports */ +#define IO_DATA_PATH_WIDTH 0x18 +#define IO_DATA_PATH_WIDTH_8 0x00 +#define IO_DATA_PATH_WIDTH_16 0x08 +#define IO_DATA_PATH_WIDTH_AUTO 0x10 + +/* convert flag found in cfgtable to data path width parameter */ +static inline int pcmcia_io_cfg_data_width(unsigned int flags) +{ + if (!(flags & CISTPL_IO_8BIT)) + return IO_DATA_PATH_WIDTH_16; + if (!(flags & CISTPL_IO_16BIT)) + return IO_DATA_PATH_WIDTH_8; + return IO_DATA_PATH_WIDTH_AUTO; +} + #endif /* __KERNEL__ */ #endif /* _LINUX_DS_H */ diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 9f897bc..7ab9174 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -139,8 +139,8 @@ static int snd_pdacf_probe(struct pcmcia_device *link) pdacf->p_dev = link; link->priv = pdacf; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -219,7 +219,7 @@ static int pdacf_config(struct pcmcia_device *link) snd_printdd(KERN_DEBUG "pdacf_config called\n"); link->conf.ConfigIndex = 0x5; - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index f23c235..a6edfc3 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -159,8 +159,8 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl, vxp->p_dev = link; link->priv = chip; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -226,7 +226,7 @@ static int vxpocket_config(struct pcmcia_device *link) strcpy(chip->card->driver, vxp440_hw.name); } - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; -- 1.7.0.4

1 0

[alsa-devel] [PATCH 10/18] pcmcia: do not use io_req_t after call to pcmcia_request_io()
by Dominik Brodowski 06 Aug '10

06 Aug '10

After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev(a)vger.kernel.org CC: linux-wireless(a)vger.kernel.org CC: linux-ide(a)vger.kernel.org CC: linux-usb(a)vger.kernel.org CC: laforge(a)gnumonks.org CC: linux-mtd(a)lists.infradead.org CC: alsa-devel(a)alsa-project.org CC: linux-serial(a)vger.kernel.org Acked-by: Marcel Holtmann <marcel(a)holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux(a)dominikbrodowski.net> --- drivers/ata/pata_pcmcia.c | 8 +++--- drivers/bluetooth/bluecard_cs.c | 18 ++++++++-------- drivers/bluetooth/bt3c_cs.c | 8 +++--- drivers/bluetooth/btuart_cs.c | 12 +++++----- drivers/bluetooth/dtl1_cs.c | 13 ++++++----- drivers/char/pcmcia/cm4000_cs.c | 12 +++++----- drivers/char/pcmcia/cm4040_cs.c | 16 +++++++------- drivers/char/pcmcia/ipwireless/main.c | 10 +++----- drivers/char/pcmcia/synclink_cs.c | 7 ++--- drivers/ide/ide-cs.c | 8 +++--- drivers/isdn/hardware/avm/avm_cs.c | 9 ++++--- drivers/isdn/hisax/avma1_cs.c | 8 ++++-- drivers/isdn/hisax/elsa_cs.c | 16 ++++++-------- drivers/isdn/hisax/sedlbauer_cs.c | 16 ++++++-------- drivers/isdn/hisax/teles_cs.c | 14 +++++------- drivers/net/pcmcia/3c574_cs.c | 2 +- drivers/net/pcmcia/3c589_cs.c | 2 +- drivers/net/pcmcia/axnet_cs.c | 4 +- drivers/net/pcmcia/com20020_cs.c | 2 +- drivers/net/pcmcia/fmvj18x_cs.c | 6 ++-- drivers/net/pcmcia/ibmtr_cs.c | 2 +- drivers/net/pcmcia/nmclan_cs.c | 2 +- drivers/net/pcmcia/pcnet_cs.c | 4 +- drivers/net/pcmcia/smc91c92_cs.c | 18 ++++++++-------- drivers/net/pcmcia/xirc2ps_cs.c | 10 ++++---- drivers/net/wireless/airo_cs.c | 12 ++++------ drivers/net/wireless/atmel_cs.c | 2 +- drivers/net/wireless/hostap/hostap_cs.c | 18 +++++++-------- drivers/net/wireless/libertas/if_cs.c | 7 ++--- drivers/net/wireless/orinoco/orinoco_cs.c | 5 ++- drivers/net/wireless/orinoco/spectrum_cs.c | 5 ++- drivers/net/wireless/wl3501_cs.c | 2 +- drivers/parport/parport_cs.c | 6 +++- drivers/scsi/pcmcia/aha152x_stub.c | 2 +- drivers/scsi/pcmcia/fdomain_stub.c | 4 +- drivers/scsi/pcmcia/nsp_cs.c | 25 ++++++++++----------- drivers/scsi/pcmcia/qlogic_stub.c | 18 ++++++++-------- drivers/scsi/pcmcia/sym53c500_cs.c | 16 +++++++------- drivers/serial/serial_cs.c | 22 +++++++++--------- drivers/staging/comedi/drivers/cb_das16_cs.c | 12 ++++------ drivers/staging/comedi/drivers/das08_cs.c | 12 ++++------ drivers/staging/comedi/drivers/ni_daq_700.c | 12 ++++------ drivers/staging/comedi/drivers/ni_daq_dio24.c | 12 ++++------ drivers/staging/comedi/drivers/ni_labpc_cs.c | 12 ++++------ drivers/staging/comedi/drivers/ni_mio_cs.c | 2 +- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 12 ++++------ drivers/staging/wlags49_h2/wl_cs.c | 2 +- drivers/telephony/ixj_pcmcia.c | 3 +- drivers/usb/host/sl811_cs.c | 7 ++--- sound/pcmcia/pdaudiocf/pdaudiocf.c | 3 +- sound/pcmcia/vx/vxpocket.c | 3 +- 51 files changed, 223 insertions(+), 240 deletions(-) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 3dcb2b1..1fcd065 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -210,13 +210,13 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; if (pcmcia_request_io(pdev, &pdev->io) != 0) return -ENODEV; - stk->ctl_base = pdev->io.BasePort2; + stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { pdev->io.NumPorts1 = io->win[0].len; pdev->io.NumPorts2 = 0; if (pcmcia_request_io(pdev, &pdev->io) != 0) return -ENODEV; - stk->ctl_base = pdev->io.BasePort1 + 0x0e; + stk->ctl_base = pdev->resource[0]->start + 0x0e; } else return -ENODEV; /* If we've got this far, we're done */ @@ -270,7 +270,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) goto failed; /* No suitable config found */ } - io_base = pdev->io.BasePort1; + io_base = pdev->resource[0]->start; ctl_base = stk->ctl_base; if (!pdev->irq) goto failed; @@ -293,7 +293,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) /* FIXME: Could be more ports at base + 0x10 but we only deal with one right now */ - if (pdev->io.NumPorts1 >= 0x20) + if (resource_size(pdev->resource[0]) >= 0x20) n_ports = 2; if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index eb085de..24d2007 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -159,7 +159,7 @@ static void bluecard_detach(struct pcmcia_device *p_dev); static void bluecard_activity_led_timeout(u_long arg) { bluecard_info_t *info = (bluecard_info_t *)arg; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) return; @@ -176,7 +176,7 @@ static void bluecard_activity_led_timeout(u_long arg) static void bluecard_enable_activity_led(bluecard_info_t *info) { - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) return; @@ -232,7 +232,7 @@ static void bluecard_write_wakeup(bluecard_info_t *info) } do { - register unsigned int iobase = info->p_dev->io.BasePort1; + register unsigned int iobase = info->p_dev->resource[0]->start; register unsigned int offset; register unsigned char command; register unsigned long ready_bit; @@ -379,7 +379,7 @@ static void bluecard_receive(bluecard_info_t *info, unsigned int offset) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; if (test_bit(XMIT_SENDING_READY, &(info->tx_state))) bluecard_enable_activity_led(info); @@ -508,7 +508,7 @@ static irqreturn_t bluecard_interrupt(int irq, void *dev_inst) if (!test_bit(CARD_READY, &(info->hw_state))) return IRQ_HANDLED; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock(&(info->lock)); @@ -622,7 +622,7 @@ static int bluecard_hci_flush(struct hci_dev *hdev) static int bluecard_hci_open(struct hci_dev *hdev) { bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data); - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE); @@ -642,7 +642,7 @@ static int bluecard_hci_open(struct hci_dev *hdev) static int bluecard_hci_close(struct hci_dev *hdev) { bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data); - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) return 0; @@ -709,7 +709,7 @@ static int bluecard_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned l static int bluecard_open(bluecard_info_t *info) { - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev; unsigned char id; @@ -828,7 +828,7 @@ static int bluecard_open(bluecard_info_t *info) static int bluecard_close(bluecard_info_t *info) { - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev = info->hdev; if (!hdev) diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 457b603..8ab494c 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -188,7 +188,7 @@ static void bt3c_write_wakeup(bt3c_info_t *info) return; do { - register unsigned int iobase = info->p_dev->io.BasePort1; + register unsigned int iobase = info->p_dev->resource[0]->start; register struct sk_buff *skb; register int len; @@ -226,7 +226,7 @@ static void bt3c_receive(bt3c_info_t *info) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; avail = bt3c_read(iobase, 0x7006); //printk("bt3c_cs: receiving %d bytes\n", avail); @@ -347,7 +347,7 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) /* our irq handler is shared */ return IRQ_NONE; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock(&(info->lock)); @@ -480,7 +480,7 @@ static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware, unsigned int iobase, size, addr, fcs, tmp; int i, err = 0; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; /* Reset */ bt3c_io_write(iobase, 0x8040, 0x0404); diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index e7e0a17..7e770d4 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -142,7 +142,7 @@ static void btuart_write_wakeup(btuart_info_t *info) } do { - register unsigned int iobase = info->p_dev->io.BasePort1; + register unsigned int iobase = info->p_dev->resource[0]->start; register struct sk_buff *skb; register int len; @@ -183,7 +183,7 @@ static void btuart_receive(btuart_info_t *info) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; do { info->hdev->stat.byte_rx++; @@ -297,7 +297,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) /* our irq handler is shared */ return IRQ_NONE; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock(&(info->lock)); @@ -354,7 +354,7 @@ static void btuart_change_speed(btuart_info_t *info, unsigned int speed) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock_irqsave(&(info->lock), flags); @@ -478,7 +478,7 @@ static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned lon static int btuart_open(btuart_info_t *info) { unsigned long flags; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev; spin_lock_init(&(info->lock)); @@ -548,7 +548,7 @@ static int btuart_open(btuart_info_t *info) static int btuart_close(btuart_info_t *info) { unsigned long flags; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev = info->hdev; if (!hdev) diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 7c94aad..bfe9313 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -149,7 +149,7 @@ static void dtl1_write_wakeup(dtl1_info_t *info) } do { - register unsigned int iobase = info->p_dev->io.BasePort1; + register unsigned int iobase = info->p_dev->resource[0]->start; register struct sk_buff *skb; register int len; @@ -214,7 +214,7 @@ static void dtl1_receive(dtl1_info_t *info) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; do { info->hdev->stat.byte_rx++; @@ -301,7 +301,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) /* our irq handler is shared */ return IRQ_NONE; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock(&(info->lock)); @@ -461,7 +461,7 @@ static int dtl1_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long static int dtl1_open(dtl1_info_t *info) { unsigned long flags; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev; spin_lock_init(&(info->lock)); @@ -508,7 +508,8 @@ static int dtl1_open(dtl1_info_t *info) outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); - info->ri_latch = inb(info->p_dev->io.BasePort1 + UART_MSR) & UART_MSR_RI; + info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR) + & UART_MSR_RI; /* Turn on interrupts */ outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); @@ -533,7 +534,7 @@ static int dtl1_open(dtl1_info_t *info) static int dtl1_close(dtl1_info_t *info) { unsigned long flags; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev = info->hdev; if (!hdev) diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index a8be2a7..18484ed 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -421,7 +421,7 @@ static struct card_fixup card_fixups[] = { static void set_cardparameter(struct cm4000_dev *dev) { int i; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; u_int8_t stopbits = 0x02; /* ISO default */ DEBUGP(3, dev, "-> set_cardparameter\n"); @@ -454,7 +454,7 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq) unsigned short num_bytes_read; unsigned char pts_reply[4]; ssize_t rc; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; rc = 0; @@ -663,7 +663,7 @@ static void terminate_monitor(struct cm4000_dev *dev) static void monitor_card(unsigned long p) { struct cm4000_dev *dev = (struct cm4000_dev *) p; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; unsigned short s; struct ptsreq ptsreq; int i, atrc; @@ -924,7 +924,7 @@ static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count, loff_t *ppos) { struct cm4000_dev *dev = filp->private_data; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; ssize_t rc; int i, j, k; @@ -1047,7 +1047,7 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos) { struct cm4000_dev *dev = filp->private_data; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; unsigned short s; unsigned char tmp; unsigned char infolen; @@ -1400,7 +1400,7 @@ static void stop_monitor(struct cm4000_dev *dev) static long cmm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct cm4000_dev *dev = filp->private_data; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; struct inode *inode = filp->f_path.dentry->d_inode; struct pcmcia_device *link; int size; diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 44adae9..a6bbf19 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -109,7 +109,7 @@ static inline unsigned char xinb(unsigned short port) static void cm4040_do_poll(unsigned long dummy) { struct reader_dev *dev = (struct reader_dev *) dummy; - unsigned int obs = xinb(dev->p_dev->io.BasePort1 + unsigned int obs = xinb(dev->p_dev->resource[0]->start + REG_OFFSET_BUFFER_STATUS); if ((obs & BSR_BULK_IN_FULL)) { @@ -140,7 +140,7 @@ static void cm4040_stop_poll(struct reader_dev *dev) static int wait_for_bulk_out_ready(struct reader_dev *dev) { int i, rc; - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; for (i = 0; i < POLL_LOOP_COUNT; i++) { if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS) @@ -170,7 +170,7 @@ static int wait_for_bulk_out_ready(struct reader_dev *dev) /* Write to Sync Control Register */ static int write_sync_reg(unsigned char val, struct reader_dev *dev) { - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; int rc; rc = wait_for_bulk_out_ready(dev); @@ -188,7 +188,7 @@ static int write_sync_reg(unsigned char val, struct reader_dev *dev) static int wait_for_bulk_in_ready(struct reader_dev *dev) { int i, rc; - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; for (i = 0; i < POLL_LOOP_COUNT; i++) { if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS) @@ -218,7 +218,7 @@ static ssize_t cm4040_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos) { struct reader_dev *dev = filp->private_data; - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; size_t bytes_to_read; unsigned long i; size_t min_bytes_to_read; @@ -320,7 +320,7 @@ static ssize_t cm4040_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos) { struct reader_dev *dev = filp->private_data; - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; ssize_t rc; int i; unsigned int bytes_to_write; @@ -567,8 +567,8 @@ static int reader_config(struct pcmcia_device *link, int devno) dev = link->priv; - DEBUGP(2, dev, "device " DEVICE_NAME "%d at 0x%.4x-0x%.4x\n", devno, - link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1); + DEBUGP(2, dev, "device " DEVICE_NAME "%d at %pR\n", devno, + link->resource[0]); DEBUGP(2, dev, "<- reader_config (succ)\n"); return 0; diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 63c32e3..9467994 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -100,7 +100,8 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, if (ret) return ret; - io_resource = request_region(p_dev->io.BasePort1, p_dev->io.NumPorts1, + io_resource = request_region(p_dev->resource[0]->start, + resource_size(p_dev->resource[0]), IPWIRELESS_PCCARD_NAME); if (cfg->mem.nwin == 0) @@ -197,7 +198,7 @@ static int config_ipwireless(struct ipw_dev *ipw) INIT_WORK(&ipw->work_reboot, signalled_reboot_work); - ipwireless_init_hardware_v1(ipw->hardware, link->io.BasePort1, + ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start, ipw->attr_memory, ipw->common_memory, ipw->is_v2_card, signalled_reboot_callback, ipw); @@ -209,10 +210,7 @@ static int config_ipwireless(struct ipw_dev *ipw) printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n", ipw->is_v2_card ? "V2/V3" : "V1"); printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": I/O ports 0x%04x-0x%04x, irq %d\n", - (unsigned int) link->io.BasePort1, - (unsigned int) (link->io.BasePort1 + - link->io.NumPorts1 - 1), + ": I/O ports %pR, irq %d\n", link->resource[0], (unsigned int) link->irq); if (ipw->attr_memory && ipw->common_memory) printk(KERN_INFO IPWIRELESS_PCCARD_NAME diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 522992e..8ded9b0 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -609,16 +609,15 @@ static int mgslpc_config(struct pcmcia_device *link) if (ret) goto failed; - info->io_base = link->io.BasePort1; + info->io_base = link->resource[0]->start; info->irq_level = link->irq; dev_info(&link->dev, "index 0x%02x:", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); printk("\n"); return 0; diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 27dbab8..6be0e5f 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -239,13 +239,13 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; if (pcmcia_request_io(pdev, &pdev->io) != 0) return -ENODEV; - stk->ctl_base = pdev->io.BasePort2; + stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { pdev->io.NumPorts1 = io->win[0].len; pdev->io.NumPorts2 = 0; if (pcmcia_request_io(pdev, &pdev->io) != 0) return -ENODEV; - stk->ctl_base = pdev->io.BasePort1 + 0x0e; + stk->ctl_base = pdev->resource[0]->start + 0x0e; } else return -ENODEV; /* If we've got this far, we're done */ @@ -279,7 +279,7 @@ static int ide_config(struct pcmcia_device *link) if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) goto failed; /* No suitable config found */ } - io_base = link->io.BasePort1; + io_base = link->resource[0]->start; ctl_base = stk->ctl_base; if (!link->irq) @@ -296,7 +296,7 @@ static int ide_config(struct pcmcia_device *link) outb(0x81, ctl_base+1); host = idecs_register(io_base, ctl_base, link->irq, link); - if (host == NULL && link->io.NumPorts1 == 0x20) { + if (host == NULL && resource_size(link->resource[0]) == 0x20) { outb(0x02, ctl_base + 0x10); host = idecs_register(io_base + 0x10, ctl_base + 0x10, link->irq, link); diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index e804a01..7c8c51f 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -191,9 +191,10 @@ static int avmcs_config(struct pcmcia_device *link) default: case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break; } - if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) { - dev_err(&link->dev, "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n", - link->io.BasePort1, link->irq); + if ((i = (*addcard)(link->resource[0]->start, link->irq)) < 0) { + dev_err(&link->dev, + "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n", + (unsigned int) link->resource[0]->start, link->irq); avmcs_release(link); return -ENODEV; } @@ -211,7 +212,7 @@ static int avmcs_config(struct pcmcia_device *link) static void avmcs_release(struct pcmcia_device *link) { - b1pcmcia_delcard(link->io.BasePort1, link->irq); + b1pcmcia_delcard(link->resource[0]->start, link->irq); pcmcia_disable_device(link); } /* avmcs_release */ diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 49e141e..8889963 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -180,16 +180,18 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) } printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n", - link->io.BasePort1, link->irq); + (unsigned int) link->resource[0]->start, link->irq); icard.para[0] = link->irq; - icard.para[1] = link->io.BasePort1; + icard.para[1] = link->resource[0]->start; icard.protocol = isdnprot; icard.typ = ISDN_CTYPE_A1_PCMCIA; i = hisax_init_pcmcia(link, &busy, &icard); if (i < 0) { - printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1); + printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 " + "PCMCIA %d at i/o %#x\n", i, + (unsigned int) link->resource[0]->start); avma1cs_release(link); return -ENODEV; } diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index 425deea..c10bfd3 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -214,23 +214,21 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); icard.para[0] = link->irq; - icard.para[1] = link->io.BasePort1; + icard.para[1] = link->resource[0]->start; icard.protocol = protocol; icard.typ = ISDN_CTYPE_ELSA_PCMCIA; i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard); if (i < 0) { - printk(KERN_ERR "elsa_cs: failed to initialize Elsa PCMCIA %d at i/o %#x\n", - i, link->io.BasePort1); + printk(KERN_ERR "elsa_cs: failed to initialize Elsa " + "PCMCIA %d with %pR\n", i, link->resource[0]); elsa_cs_release(link); } else ((local_info_t*)link->priv)->cardnr = i; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 5dbad96..cecb35a 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -296,27 +296,25 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req->Base, req->Base+req->Size-1); printk("\n"); icard.para[0] = link->irq; - icard.para[1] = link->io.BasePort1; + icard.para[1] = link->resource[0]->start; icard.protocol = protocol; icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA; ret = hisax_init_pcmcia(link, &(((local_info_t *)link->priv)->stop), &icard); if (ret < 0) { - printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n", - ret, link->io.BasePort1); + printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d with %pR\n", + ret, link->resource[0]); sedlbauer_release(link); return -ENODEV; } else diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index d3fb1b7..3787fc7 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -194,23 +194,21 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); icard.para[0] = link->irq; - icard.para[1] = link->io.BasePort1; + icard.para[1] = link->resource[0]->start; icard.protocol = protocol; icard.typ = ISDN_CTYPE_TELESPCMCIA; i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard); if (i < 0) { printk(KERN_ERR "teles_cs: failed to initialize Teles PCMCIA %d at i/o %#x\n", - i, link->io.BasePort1); + i, (unsigned int) link->resource[0]->start); teles_cs_release(link); return -ENODEV; } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index e249b89..b5ea9b8 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -356,7 +356,7 @@ static int tc574_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; ioaddr = dev->base_addr; diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index b0772df..122ef4a 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -298,7 +298,7 @@ static int tc589_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; ioaddr = dev->base_addr; EL3WINDOW(0); diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index ee0a6d0..c52fdf3 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -332,7 +332,7 @@ static int axnet_config(struct pcmcia_device *link) if (!link->irq) goto failed; - if (link->io.NumPorts2 == 8) { + if (resource_size(link->resource[1]) == 8) { link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; } @@ -342,7 +342,7 @@ static int axnet_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; if (!get_prom(link)) { printk(KERN_NOTICE "axnet_cs: this is not an AX88190 card!\n"); diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 99957af..3b53818 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -266,7 +266,7 @@ static int com20020_config(struct pcmcia_device *link) goto failed; } - ioaddr = dev->base_addr = link->io.BasePort1; + ioaddr = dev->base_addr = link->resource[0]->start; dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); dev_dbg(&link->dev, "request IRQ %d\n", diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 95a991b..bba6369 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -315,7 +315,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) if (ret == 0) { /* calculate ConfigIndex value */ link->conf.ConfigIndex = - ((link->io.BasePort1 & 0x0f0) >> 3) | 0x22; + ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; return ret; } } @@ -436,9 +436,9 @@ static int fmvj18x_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; - if (link->io.BasePort2 != 0) { + if (resource_size(link->resource[1]) != 0) { ret = fmvj18x_setup_mfc(link); if (ret != 0) goto failed; } diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index c36dcd1..e99abaa 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -231,7 +231,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) if (ret) goto failed; } - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt); if (ret) diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index c0d85af..9980cbb 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -655,7 +655,7 @@ static int nmclan_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; ioaddr = dev->base_addr; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index db6dbda..c9cd237 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -554,7 +554,7 @@ static int pcnet_config(struct pcmcia_device *link) if (!link->irq) goto failed; - if (link->io.NumPorts2 == 8) { + if (resource_size(link->resource[1]) == 8) { link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; } @@ -566,7 +566,7 @@ static int pcnet_config(struct pcmcia_device *link) if (ret) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; if (info->flags & HAS_MISC_REG) { if ((if_port == 1) || (if_port == 2)) dev->if_port = if_port; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 88f503a..1b0b323 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -457,7 +457,7 @@ static int mhz_mfc_config(struct pcmcia_device *link) if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL)) return -ENODEV; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; /* Allocate a memory window, for accessing the ISR */ req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; @@ -545,7 +545,7 @@ static void mot_config(struct pcmcia_device *link) struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; - unsigned int iouart = link->io.BasePort2; + unsigned int iouart = link->resource[1]->start; /* Set UART base address and force map with COR bit 1 */ writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0); @@ -614,7 +614,7 @@ static int smc_config(struct pcmcia_device *link) link->io.NumPorts1 = 16; i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; return i; } @@ -666,7 +666,7 @@ static int osi_config(struct pcmcia_device *link) link->io.NumPorts2 = 0; i = pcmcia_request_io(link, &link->io); } - dev->base_addr = link->io.BasePort1 + 0x10; + dev->base_addr = link->resource[0]->start + 0x10; return i; } @@ -683,7 +683,7 @@ static int osi_load_firmware(struct pcmcia_device *link) /* Download the Seven of Diamonds firmware */ for (i = 0; i < fw->size; i++) { - outb(fw->data[i], link->io.BasePort1 + 2); + outb(fw->data[i], link->resource[0]->start + 2); udelay(50); } release_firmware(fw); @@ -725,12 +725,12 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) return rc; } else if (manfid == MANFID_OSITECH) { /* Make sure both functions are powered up */ - set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR); + set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR); /* Now, turn on the interrupt for both card functions */ - set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR); + set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR); dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n", - inw(link->io.BasePort1 + OSITECH_AUI_PWR), - inw(link->io.BasePort1 + OSITECH_RESET_ISR)); + inw(link->resource[0]->start + OSITECH_AUI_PWR), + inw(link->resource[0]->start + OSITECH_RESET_ISR)); } return 0; } diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index e3a85ce..034920b 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -877,13 +877,13 @@ xirc2ps_config(struct pcmcia_device * link) * the base address of the ethernet port (BasePort1) is written * to the BAR registers of the modem. */ - err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, - link->io.BasePort2 & 0xff); + err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8) + link->resource[1]->start & 0xff); if (err) goto config_error; err = pcmcia_write_config_byte(link, CISREG_IOBASE_1, - (link->io.BasePort2 >> 8) & 0xff); + (link->resource[1]->start >> 8) & 0xff); if (err) goto config_error; @@ -907,7 +907,7 @@ xirc2ps_config(struct pcmcia_device * link) * part. */ writeb(0x47, local->dingo_ccr + CISREG_COR); - ioaddr = link->io.BasePort1; + ioaddr = link->resource[0]->start; writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0); writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1); @@ -954,7 +954,7 @@ xirc2ps_config(struct pcmcia_device * link) /* we can now register the device with the net subsystem */ dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; if (local->dingo) do_reset(dev, 1); /* a kludge to make the cem56 work */ diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 9389ba0..b7e7f50 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -271,7 +271,7 @@ static int airo_config(struct pcmcia_device *link) goto failed; ((local_info_t *)link->priv)->eth_dev = init_airo_card(link->irq, - link->io.BasePort1, 1, &link->dev); + link->resource[0]->start, 1, &link->dev); if (!((local_info_t *)link->priv)->eth_dev) goto failed; @@ -281,12 +281,10 @@ static int airo_config(struct pcmcia_device *link) if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req->Base, req->Base+req->Size-1); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 91ee74a..65b3aed 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -253,7 +253,7 @@ static int atmel_config(struct pcmcia_device *link) ((local_info_t*)link->priv)->eth_dev = init_atmel_card(link->irq, - link->io.BasePort1, + link->resource[0]->start, did ? did->driver_info : ATMEL_FW_TYPE_NONE, &link->dev, card_present, diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 6912936..4e13ced 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -227,7 +227,7 @@ static void sandisk_set_iobase(local_info_t *local) struct hostap_cs_priv *hw_priv = local->hw_priv; res = pcmcia_write_config_byte(hw_priv->link, 0x10, - hw_priv->link->io.BasePort1 & 0x00ff); + hw_priv->link->resource[0]->start & 0x00ff); if (res != 0) { printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -" " res=%d\n", res); @@ -235,7 +235,7 @@ static void sandisk_set_iobase(local_info_t *local) udelay(10); res = pcmcia_write_config_byte(hw_priv->link, 0x12, - (hw_priv->link->io.BasePort1 >> 8) & 0x00ff); + (hw_priv->link->resource[0]->start >> 8) & 0x00ff); if (res != 0) { printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -" " res=%d\n", res); @@ -265,7 +265,7 @@ static int sandisk_enable_wireless(struct net_device *dev) local_info_t *local = iface->local; struct hostap_cs_priv *hw_priv = local->hw_priv; - if (hw_priv->link->io.NumPorts1 < 0x42) { + if (resource_size(hw_priv->link->resource[0]) < 0x42) { /* Not enough ports to be SanDisk multi-function card */ ret = -ENODEV; goto done; @@ -604,7 +604,7 @@ static int prism2_config(struct pcmcia_device *link) goto failed_unlock; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; spin_unlock_irqrestore(&local->irq_init_lock, flags); @@ -616,12 +616,10 @@ static int prism2_config(struct pcmcia_device *link) link->conf.Vpp % 10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); local->shutdown = 0; diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 1d3a7e0..be4c475 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -853,7 +853,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out1; /* Initialize io access */ - card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1); + card->iobase = ioport_map(p_dev->resource[0]->start, + resource_size(p_dev->resource[0])); if (!card->iobase) { lbs_pr_err("error in ioport_map\n"); ret = -EIO; @@ -872,9 +873,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev) } /* Finally, report what we've done */ - lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n", - p_dev->irq, p_dev->io.BasePort1, - p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1); + lbs_deb_cs("irq %d, io %pR", p_dev->irq, p_dev->resource[0]); /* * Most of the libertas cards can do unaligned register access, but some diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 41ca4f1..6d514b5 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -257,7 +257,8 @@ orinoco_cs_config(struct pcmcia_device *link) /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ - mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); if (!mem) goto failed; @@ -279,7 +280,7 @@ orinoco_cs_config(struct pcmcia_device *link) } /* Register an interface with the stack */ - if (orinoco_if_add(priv, link->io.BasePort1, + if (orinoco_if_add(priv, link->resource[0]->start, link->irq, NULL) != 0) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 39399cd..4f8f55e 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -319,7 +319,8 @@ spectrum_cs_config(struct pcmcia_device *link) /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ - mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); if (!mem) goto failed; @@ -346,7 +347,7 @@ spectrum_cs_config(struct pcmcia_device *link) } /* Register an interface with the stack */ - if (orinoco_if_add(priv, link->io.BasePort1, + if (orinoco_if_add(priv, link->resource[0]->start, link->irq, NULL) != 0) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 35f431b..a32f220 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1960,7 +1960,7 @@ static int wl3501_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev)) { printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n"); diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index ee56fd6..fc1639c 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -177,12 +177,14 @@ static int parport_config(struct pcmcia_device *link) if (ret) goto failed; - p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2, + p = parport_pc_probe_port(link->resource[0]->start, + link->resource[1]->start, link->irq, PARPORT_DMA_NONE, &link->dev, IRQF_SHARED); if (p == NULL) { printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at " - "0x%3x, irq %u failed\n", link->io.BasePort1, + "0x%3x, irq %u failed\n", + (unsigned int) link->resource[0]->start, link->irq); goto failed; } diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index b07b53e..3e040f5 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -167,7 +167,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) /* Set configuration options for the aha152x driver */ memset(&s, 0, sizeof(s)); s.conf = "PCMCIA setup"; - s.io_port = link->io.BasePort1; + s.io_port = link->resource[0]->start; s.irq = link->irq; s.scsiid = host_id; s.reconnect = reconnect; diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index ee04897..49a9a0a 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -137,10 +137,10 @@ static int fdomain_config(struct pcmcia_device *link) goto failed; /* A bad hack... */ - release_region(link->io.BasePort1, link->io.NumPorts1); + release_region(link->resource[0]->start, resource_size(link->resource[0])); /* Set configuration options for the fdomain driver */ - sprintf(str, "%d,%d", link->io.BasePort1, link->irq); + sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq); fdomain_setup(str); host = __fdomain_16x0_detect(&fdomain_driver_template); diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index d414207..d929891 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1719,17 +1719,19 @@ static int nsp_cs_config(struct pcmcia_device *link) goto cs_failed; if (free_ports) { - if (link->io.BasePort1) { - release_region(link->io.BasePort1, link->io.NumPorts1); + if (link->resource[0]) { + release_region(link->resource[0]->start, + resource_size(link->resource[0])); } - if (link->io.BasePort2) { - release_region(link->io.BasePort2, link->io.NumPorts2); + if (link->resource[1]) { + release_region(link->resource[1]->start, + resource_size(link->resource[1])); } } /* Set port and IRQ */ - data->BaseAddress = link->io.BasePort1; - data->NumAddress = link->io.NumPorts1; + data->BaseAddress = link->resource[0]->start; + data->NumAddress = resource_size(link->resource[0]); data->IrqNumber = link->irq; nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d", @@ -1764,13 +1766,10 @@ static int nsp_cs_config(struct pcmcia_device *link) if (link->conf.Attributes & CONF_ENABLE_IRQ) { printk(", irq %d", link->irq); } - if (link->io.NumPorts1) { - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - } - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base, cfg_mem->req.Base+cfg_mem->req.Size-1); diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index c1cf7f4..4e2b83f 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -215,18 +215,18 @@ static int qlogic_config(struct pcmcia_device * link) if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { /* set ATAcmd */ - outb(0xb4, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0xb4, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* The KXL-810AN has a bigger IO port window */ - if (link->io.NumPorts1 == 32) + if (resource_size(link->resource[0]) == 32) host = qlogic_detect(&qlogicfas_driver_template, link, - link->io.BasePort1 + 16, link->irq); + link->resource[0]->start + 16, link->irq); else host = qlogic_detect(&qlogicfas_driver_template, link, - link->io.BasePort1, link->irq); + link->resource[0]->start, link->irq); if (!host) { printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name); @@ -268,9 +268,9 @@ static int qlogic_resume(struct pcmcia_device *link) if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { - outb(0x80, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0x80, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* Ugggglllyyyy!!! */ qlogicfas408_bus_reset(NULL); diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index bd79e45..d99c0cb 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -733,9 +733,9 @@ SYM53C500_config(struct pcmcia_device *link) (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { /* set ATAcmd */ - outb(0xb4, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0xb4, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* @@ -748,7 +748,7 @@ SYM53C500_config(struct pcmcia_device *link) * 0x130, 0x230, 0x280, 0x290, * 0x320, 0x330, 0x340, 0x350 */ - port_base = link->io.BasePort1; + port_base = link->resource[0]->start; irq_level = link->irq; DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n", @@ -821,15 +821,15 @@ static int sym53c500_resume(struct pcmcia_device *link) if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { - outb(0x80, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0x80, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* * If things don't work after a "resume", * this is a good place to start looking. */ - SYM53C500_int_host_reset(link->io.BasePort1); + SYM53C500_int_host_reset(link->resource[0]->start); return 0; } diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 2be8b10..fe7adcd 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -463,13 +463,13 @@ static int simple_config(struct pcmcia_device *link) /* If the card is already configured, look up the port and irq */ if (link->function_config) { unsigned int port = 0; - if ((link->io.BasePort2 != 0) && - (link->io.NumPorts2 == 8)) { - port = link->io.BasePort2; + if ((link->resource[1]->end != 0) && + (resource_size(link->resource[1]) == 8)) { + port = link->resource[1]->end; info->slave = 1; } else if ((info->manfid == MANFID_OSITECH) && - (link->io.NumPorts1 == 0x40)) { - port = link->io.BasePort1 + 0x28; + (resource_size(link->resource[0]) == 0x40)) { + port = link->resource[0]->start + 0x28; info->slave = 1; } if (info->slave) { @@ -507,7 +507,7 @@ found_port: i = pcmcia_request_configuration(link, &link->conf); if (i != 0) return -1; - return setup_serial(link, info, link->io.BasePort1, link->irq); + return setup_serial(link, info, link->resource[0]->start, link->irq); } static int multi_config_check(struct pcmcia_device *p_dev, @@ -524,7 +524,7 @@ static int multi_config_check(struct pcmcia_device *p_dev, p_dev->io.BasePort1 = cf->io.win[0].base; p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; if (!pcmcia_request_io(p_dev, &p_dev->io)) { - *base2 = p_dev->io.BasePort1 + 8; + *base2 = p_dev->resource[0]->start + 8; return 0; } } @@ -544,7 +544,7 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev, p_dev->io.BasePort2 = cf->io.win[1].base; p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; if (!pcmcia_request_io(p_dev, &p_dev->io)) { - *base2 = p_dev->io.BasePort2; + *base2 = p_dev->resource[1]->start; return 0; } } @@ -596,9 +596,9 @@ static int multi_config(struct pcmcia_device *link) link->conf.ConfigIndex == 3) { err = setup_serial(link, info, base2, link->irq); - base2 = link->io.BasePort1; + base2 = link->resource[0]->start;; } else { - err = setup_serial(link, info, link->io.BasePort1, + err = setup_serial(link, info, link->resource[0]->start, link->irq); } info->c950ctrl = base2; @@ -613,7 +613,7 @@ static int multi_config(struct pcmcia_device *link) return 0; } - setup_serial(link, info, link->io.BasePort1, link->irq); + setup_serial(link, info, link->resource[0]->start, link->irq); for (i = 0; i < info->multi - 1; i++) setup_serial(link, info, base2 + (8 * i), link->irq); diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index acef29c..208f1b7 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -170,7 +170,7 @@ static int das16cs_attach(struct comedi_device *dev, if (!link) return -EIO; - dev->iobase = link->io.BasePort1; + dev->iobase = link->resource[0]->start;; printk("I/O base=0x%04lx ", dev->iobase); printk("fingerprint:\n"); @@ -787,12 +787,10 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %u", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); + if (link->resource[1]) + printk(", io %pR", link->resource[1]); printk("\n"); return; diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 3eddb7c..c4cfcff 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -88,7 +88,7 @@ static int das08_cs_attach(struct comedi_device *dev, printk(" no pcmcia cards found\n"); return -EIO; } - iobase = link->io.BasePort1; + iobase = link->resource[0]->start; } else { printk(" bug! board does not have PCMCIA bustype\n"); return -EINVAL; @@ -283,12 +283,10 @@ static void das08_pcmcia_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %u", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); return; diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index f3c4d2f..6d56957 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -376,7 +376,7 @@ static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it) link = pcmcia_cur_dev; /* XXX hack */ if (!link) return -EIO; - iobase = link->io.BasePort1; + iobase = link->resource[0]->start; #ifdef incomplete irq = link->irq; #endif @@ -644,12 +644,10 @@ static void dio700_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req.Base, req.Base + req.Size - 1); diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index f0c4367..29e1daf 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -128,7 +128,7 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it) link = pcmcia_cur_dev; /* XXX hack */ if (!link) return -EIO; - iobase = link->io.BasePort1; + iobase = link->resource[0]->start; #ifdef incomplete irq = link->irq; #endif @@ -396,12 +396,10 @@ static void dio24_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req.Base, req.Base + req.Size - 1); diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 1ee78f8..fb10987 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -142,7 +142,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) link = pcmcia_cur_dev; /* XXX hack */ if (!link) return -EIO; - iobase = link->io.BasePort1; + iobase = link->resource[0]->start; irq = link->irq; break; default: @@ -373,12 +373,10 @@ static void labpc_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req.Base, req.Base + req.Size - 1); diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index 0bce220..f37dc22 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -355,7 +355,7 @@ static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it) return -EIO; dev->driver = &driver_ni_mio_cs; - dev->iobase = link->io.BasePort1; + dev->iobase = link->resource[0]->start; irq = link->irq; diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index 67c0fa6..80b8d57 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -871,7 +871,7 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it) } } - dev->iobase = local->link->io.BasePort1; + dev->iobase = local->link->resource[0]->start; ret = alloc_subdevices(dev, 4); if (ret < 0) @@ -1153,12 +1153,10 @@ static void daqp_cs_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %u", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); return; diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index afe4575..2361537 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -319,7 +319,7 @@ void wl_adapter_insert( struct pcmcia_device *link ) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index f6c7e6f..a801036 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -150,7 +150,8 @@ static int ixj_config(struct pcmcia_device * link) /* * Register the card with the core. */ - j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10); + j = ixj_pcmcia_probe(link->resource[0]->start, + link->resource[0]->start + 0x10); info->ndev = 1; ixj_get_serial(link, j); diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index acb7e25..22e04f2 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -189,7 +189,7 @@ static int sl811_cs_config(struct pcmcia_device *link) goto failed; /* require an IRQ and two registers */ - if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) + if (resource_size(link->resource[0]) < 2) goto failed; if (!link->irq) @@ -204,11 +204,10 @@ static int sl811_cs_config(struct pcmcia_device *link) if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); printk(", irq %d", link->irq); - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); + printk(", io %pR", link->resource[0]); printk("\n"); - if (sl811_hc_init(parent, link->io.BasePort1, link->irq) + if (sl811_hc_init(parent, link->resource[0]->start, link->irq) < 0) { failed: printk(KERN_WARNING "sl811_cs_config failed\n"); diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index df110df..9f897bc 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -231,7 +231,8 @@ static int pdacf_config(struct pcmcia_device *link) if (ret) goto failed; - if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq) < 0) + if (snd_pdacf_assign_resources(pdacf, link->resource[0]->start, + link->irq) < 0) goto failed; return 0; diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 624b47a..f23c235 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -241,7 +241,8 @@ static int vxpocket_config(struct pcmcia_device *link) chip->dev = &link->dev; snd_card_set_dev(chip->card, chip->dev); - if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq) < 0) + if (snd_vxpocket_assign_resources(chip, link->resource[0]->start, + link->irq) < 0) goto failed; return 0; -- 1.7.0.4

1 0

[alsa-devel] [PATCH 06/18] pcmcia: remove cs_types.h
by Dominik Brodowski 06 Aug '10

06 Aug '10

Remove cs_types.h which is no longer needed: Most definitions aren't used at all, a few can be made away with, and two remaining definitions (typedefs, unfortunatley) may be moved to more specific places. CC: linux-ide(a)vger.kernel.org CC: linux-usb(a)vger.kernel.org CC: laforge(a)gnumonks.org CC: linux-mtd(a)lists.infradead.org CC: alsa-devel(a)alsa-project.org CC: linux-serial(a)vger.kernel.org Acked-by: Marcel Holtmann <marcel(a)holtmann.org> (for drivers/bluetooth/) Acked-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Dominik Brodowski <linux(a)dominikbrodowski.net> --- Documentation/pcmcia/driver-changes.txt | 5 +++ drivers/ata/pata_pcmcia.c | 1 - drivers/bluetooth/bluecard_cs.c | 1 - drivers/bluetooth/bt3c_cs.c | 1 - drivers/bluetooth/btuart_cs.c | 1 - drivers/bluetooth/dtl1_cs.c | 1 - drivers/char/pcmcia/cm4000_cs.c | 1 - drivers/char/pcmcia/cm4040_cs.c | 1 - drivers/char/pcmcia/ipwireless/main.h | 1 - drivers/char/pcmcia/ipwireless/tty.h | 1 - drivers/char/pcmcia/synclink_cs.c | 1 - drivers/ide/ide-cs.c | 1 - drivers/isdn/hardware/avm/avm_cs.c | 1 - drivers/isdn/hisax/avma1_cs.c | 1 - drivers/isdn/hisax/elsa_cs.c | 1 - drivers/isdn/hisax/sedlbauer_cs.c | 1 - drivers/isdn/hisax/teles_cs.c | 1 - drivers/mmc/host/sdricoh_cs.c | 1 - drivers/mtd/maps/pcmciamtd.c | 1 - drivers/net/pcmcia/3c574_cs.c | 1 - drivers/net/pcmcia/3c589_cs.c | 1 - drivers/net/pcmcia/axnet_cs.c | 1 - drivers/net/pcmcia/com20020_cs.c | 1 - drivers/net/pcmcia/fmvj18x_cs.c | 1 - drivers/net/pcmcia/ibmtr_cs.c | 1 - drivers/net/pcmcia/nmclan_cs.c | 1 - drivers/net/pcmcia/pcnet_cs.c | 5 +-- drivers/net/pcmcia/smc91c92_cs.c | 1 - drivers/net/pcmcia/xirc2ps_cs.c | 1 - drivers/net/wireless/airo_cs.c | 1 - drivers/net/wireless/atmel_cs.c | 1 - drivers/net/wireless/b43/pcmcia.c | 1 - drivers/net/wireless/hostap/hostap_cs.c | 3 +- drivers/net/wireless/libertas/if_cs.c | 1 - drivers/net/wireless/orinoco/orinoco_cs.c | 1 - drivers/net/wireless/orinoco/spectrum_cs.c | 1 - drivers/net/wireless/ray_cs.c | 1 - drivers/net/wireless/wl3501_cs.c | 10 +----- drivers/parport/parport_cs.c | 1 - drivers/pcmcia/au1000_generic.h | 1 - drivers/pcmcia/au1000_pb1x00.c | 2 - drivers/pcmcia/cistpl.c | 1 - drivers/pcmcia/cs.c | 1 - drivers/pcmcia/db1xxx_ss.c | 1 - drivers/pcmcia/ds.c | 1 - drivers/pcmcia/i82092.c | 1 - drivers/pcmcia/i82365.c | 1 - drivers/pcmcia/m32r_cfc.c | 1 - drivers/pcmcia/m32r_pcc.c | 1 - drivers/pcmcia/m8xx_pcmcia.c | 1 - drivers/pcmcia/pcmcia_cis.c | 1 - drivers/pcmcia/pcmcia_resource.c | 1 - drivers/pcmcia/pd6729.c | 1 - drivers/pcmcia/pxa2xx_base.c | 1 - drivers/pcmcia/rsrc_iodyn.c | 1 - drivers/pcmcia/rsrc_mgr.c | 1 - drivers/pcmcia/rsrc_nonstatic.c | 1 - drivers/pcmcia/sa1100_generic.c | 1 - drivers/pcmcia/soc_common.h | 1 - drivers/pcmcia/socket_sysfs.c | 1 - drivers/pcmcia/tcic.c | 1 - drivers/pcmcia/xxs1500_ss.c | 1 - drivers/pcmcia/yenta_socket.c | 1 - drivers/scsi/pcmcia/aha152x_stub.c | 1 - drivers/scsi/pcmcia/fdomain_stub.c | 1 - drivers/scsi/pcmcia/nsp_cs.c | 1 - drivers/scsi/pcmcia/qlogic_stub.c | 1 - drivers/scsi/pcmcia/sym53c500_cs.c | 1 - drivers/serial/serial_cs.c | 1 - drivers/ssb/main.c | 1 - drivers/ssb/pcmcia.c | 1 - drivers/ssb/scan.c | 1 - drivers/staging/comedi/drivers/cb_das16_cs.c | 1 - drivers/staging/comedi/drivers/das08_cs.c | 1 - drivers/staging/comedi/drivers/ni_daq_700.c | 1 - drivers/staging/comedi/drivers/ni_daq_dio24.c | 1 - drivers/staging/comedi/drivers/ni_labpc_cs.c | 1 - drivers/staging/comedi/drivers/ni_mio_cs.c | 1 - drivers/staging/comedi/drivers/quatech_daqp_cs.c | 1 - drivers/staging/wlags49_h2/wl_cs.c | 1 - drivers/staging/wlags49_h2/wl_internal.h | 1 - drivers/telephony/ixj_pcmcia.c | 1 - drivers/usb/host/sl811_cs.c | 5 +-- include/pcmcia/cistpl.h | 2 + include/pcmcia/cs.h | 10 +----- include/pcmcia/cs_types.h | 40 ---------------------- include/pcmcia/ds.h | 3 +- include/pcmcia/ss.h | 1 - sound/pcmcia/pdaudiocf/pdaudiocf.h | 1 - sound/pcmcia/vx/vxpocket.h | 1 - 90 files changed, 14 insertions(+), 151 deletions(-) delete mode 100644 include/pcmcia/cs_types.h diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index 61bc4e9..ff5f0be 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,4 +1,9 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* No dev_info_t, no cs_types.h (as of 2.6.36) + dev_info_t and a few other typedefs are removed. No longer use them + in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as + this file is gone. + * No dev_node_t (as of 2.6.35) There is no more need to fill out a "dev_node_t" structure. diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 118c28e..3dcb2b1 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -34,7 +34,6 @@ #include <linux/ata.h> #include <linux/libata.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 6d34f40..eb085de 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -39,7 +39,6 @@ #include <linux/skbuff.h> #include <linux/io.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 21e05fd..457b603 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -45,7 +45,6 @@ #include <linux/device.h> #include <linux/firmware.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 4ed7288..e7e0a17 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -41,7 +41,6 @@ #include <asm/system.h> #include <asm/io.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index ef044d5..7c94aad 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -41,7 +41,6 @@ #include <asm/system.h> #include <asm/io.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index e7956ac..a8be2a7 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -34,7 +34,6 @@ #include <linux/uaccess.h> #include <linux/io.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index c0775c8..44adae9 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -29,7 +29,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h index 96d0ef3..c207be8 100644 --- a/drivers/char/pcmcia/ipwireless/main.h +++ b/drivers/char/pcmcia/ipwireless/main.h @@ -21,7 +21,6 @@ #include <linux/sched.h> #include <linux/types.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/char/pcmcia/ipwireless/tty.h index 4da6c20..3e163d4 100644 --- a/drivers/char/pcmcia/ipwireless/tty.h +++ b/drivers/char/pcmcia/ipwireless/tty.h @@ -21,7 +21,6 @@ #include <linux/types.h> #include <linux/sched.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 308903e..522992e 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -70,7 +70,6 @@ #include <linux/workqueue.h> #include <linux/hdlc.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 0b7815d..27dbab8 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -43,7 +43,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index f410d0e..e804a01 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index a80a761..49e141e 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index 218927e..425deea 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 1f4feaa..5dbad96 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 5771955..d3fb1b7 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -27,7 +27,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c index e7507af..7aa65bb 100644 --- a/drivers/mmc/host/sdricoh_cs.c +++ b/drivers/mmc/host/sdricoh_cs.c @@ -30,7 +30,6 @@ #include <linux/ioport.h> #include <linux/scatterlist.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index e699e6a..7948816 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -16,7 +16,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 10ee106..e249b89 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -87,7 +87,6 @@ earlier 3Com products. #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index ce63c37..b0772df 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -41,7 +41,6 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 33525bf..467fd4b 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -39,7 +39,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 5643f94..99957af 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -43,7 +43,6 @@ #include <linux/arcdevice.h> #include <linux/com20020.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 7c27c50..95a991b 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -49,7 +49,6 @@ #include <linux/ioport.h> #include <linux/crc32.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index 67ee985..c36dcd1 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -57,7 +57,6 @@ #include <linux/trdevice.h> #include <linux/ibmtr.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 9b63dec..c0eacfa 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -146,7 +146,6 @@ Include Files #include <linux/ioport.h> #include <linux/bitops.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index bfdef72..db6dbda 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -42,7 +42,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> @@ -113,8 +112,6 @@ static int setup_dma_config(struct pcmcia_device *link, int start_pg, static void pcnet_detach(struct pcmcia_device *p_dev); -static dev_info_t dev_info = "pcnet_cs"; - /*====================================================================*/ typedef struct hw_info_t { @@ -956,7 +953,7 @@ static int pcnet_open(struct net_device *dev) set_misc_reg(dev); outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */ - ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev); + ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev); if (ret) return ret; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 307cd17..88f503a 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -44,7 +44,6 @@ #include <linux/jiffies.h> #include <linux/firmware.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index b6c3644..a7662f0 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -82,7 +82,6 @@ #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 33bdc6a..9389ba0 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -32,7 +32,6 @@ #include <linux/timer.h> #include <linux/netdevice.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index c2746fc..91ee74a 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -42,7 +42,6 @@ #include <linux/moduleparam.h> #include <linux/device.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 0e99b63..f71bc78 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -26,7 +26,6 @@ #include <linux/ssb/ssb.h> #include <linux/slab.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 29b31a6..2f4b6d4 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -12,7 +12,6 @@ #include <linux/wireless.h> #include <net/iw_handler.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> @@ -23,7 +22,7 @@ #include "hostap_wlan.h" -static dev_info_t dev_info = "hostap_cs"; +static char *dev_info = "hostap_cs"; MODULE_AUTHOR("Jouni Malinen"); MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN " diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 08e4e39..1d3a7e0 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -28,7 +28,6 @@ #include <linux/firmware.h> #include <linux/netdevice.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index b16d5db..41ca4f1 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index b51a9ad..cad30e4 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -25,7 +25,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index abff893..165beb6 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -46,7 +46,6 @@ #include <linux/ethtool.h> #include <linux/ieee80211.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 376c6b9..35f431b 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -48,7 +48,6 @@ #include <net/iw_handler.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> @@ -89,13 +88,6 @@ static int wl3501_config(struct pcmcia_device *link); static void wl3501_release(struct pcmcia_device *link); -/* - * The dev_info variable is the "key" that is used to match up this - * device driver with appropriate cards, through the card configuration - * database. - */ -static dev_info_t wl3501_dev_info = "wl3501_cs"; - static const struct { int reg_domain; int min, max, deflt; @@ -1421,7 +1413,7 @@ static struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev) static void wl3501_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strlcpy(info->driver, wl3501_dev_info, sizeof(info->driver)); + strlcpy(info->driver, "wl3501_cs", sizeof(info->driver)); } static const struct ethtool_ops ops = { diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index fd8cfe9..ee56fd6 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -48,7 +48,6 @@ #include <linux/parport.h> #include <linux/parport_pc.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h index a324d32..67530ce 100644 --- a/drivers/pcmcia/au1000_generic.h +++ b/drivers/pcmcia/au1000_generic.h @@ -23,7 +23,6 @@ /* include the world */ -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c index 5a979cb..807f2d7 100644 --- a/drivers/pcmcia/au1000_pb1x00.c +++ b/drivers/pcmcia/au1000_pb1x00.c @@ -31,11 +31,9 @@ #include <linux/proc_fs.h> #include <linux/types.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> -#include <pcmcia/bus_ops.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 8844bc3..ba4a5ac 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -27,7 +27,6 @@ #include <asm/byteorder.h> #include <asm/unaligned.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> #include <pcmcia/cisreg.h> diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index efa30b8..2ec8ac9 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -32,7 +32,6 @@ #include <asm/system.h> #include <asm/irq.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c index 0f4cc3f..27575e6 100644 --- a/drivers/pcmcia/db1xxx_ss.c +++ b/drivers/pcmcia/db1xxx_ss.c @@ -29,7 +29,6 @@ #include <linux/slab.h> #include <linux/spinlock.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <asm/mach-au1x00/au1000.h> diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 0861771..bacfc55 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -26,7 +26,6 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index 3003bb3..05d0879 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -15,7 +15,6 @@ #include <linux/interrupt.h> #include <linux/device.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 9e2a156..61746bd 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -50,7 +50,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 7e16ed8..24de499 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -26,7 +26,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 6c5c3f9..8e47238 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -27,7 +27,6 @@ #include <asm/system.h> #include <asm/addrspace.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index 25e5e30..f2f90a7 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -59,7 +59,6 @@ #include <asm/irq.h> #include <asm/fs_pd.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/ss.h> diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c index 4a65eaf..0ac54da 100644 --- a/drivers/pcmcia/pcmcia_cis.c +++ b/drivers/pcmcia/pcmcia_cis.c @@ -19,7 +19,6 @@ #include <linux/kernel.h> #include <linux/netdevice.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ss.h> diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index a4cd9ad..2394de4 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -25,7 +25,6 @@ #include <asm/irq.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index b61a136..b8a869a 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -17,7 +17,6 @@ #include <linux/device.h> #include <linux/io.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index df4532e..66c0225 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -32,7 +32,6 @@ #include <mach/pxa2xx-regs.h> #include <asm/mach-types.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/rsrc_iodyn.c b/drivers/pcmcia/rsrc_iodyn.c index 6ed7bf1..3b1dce2 100644 --- a/drivers/pcmcia/rsrc_iodyn.c +++ b/drivers/pcmcia/rsrc_iodyn.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c index b12ecf7..b433a79 100644 --- a/drivers/pcmcia/rsrc_mgr.c +++ b/drivers/pcmcia/rsrc_mgr.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 13245a2..0cca08f 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -28,7 +28,6 @@ #include <asm/irq.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index edbd8c4..e098514 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -35,7 +35,6 @@ #include <linux/slab.h> #include <linux/platform_device.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/ss.h> diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h index e40824c..3fba3a6 100644 --- a/drivers/pcmcia/soc_common.h +++ b/drivers/pcmcia/soc_common.h @@ -11,7 +11,6 @@ /* include the world */ #include <linux/cpufreq.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index 80e36bc..cb0d3ac 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -26,7 +26,6 @@ #include <asm/system.h> #include <asm/irq.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 56004a1..be0d841 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -49,7 +49,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/ss.h> #include "tcic.h" diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c index 201ccfa..fa88c36 100644 --- a/drivers/pcmcia/xxs1500_ss.c +++ b/drivers/pcmcia/xxs1500_ss.c @@ -17,7 +17,6 @@ #include <linux/slab.h> #include <linux/spinlock.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index f1d4137..414d9a6 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -19,7 +19,6 @@ #include <linux/io.h> #include <linux/slab.h> -#include <pcmcia/cs_types.h> #include <pcmcia/ss.h> #include <pcmcia/cs.h> diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 9d70aef..b07b53e 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -49,7 +49,6 @@ #include <scsi/scsi_host.h> #include "aha152x.h" -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 21b1411..ee04897 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -46,7 +46,6 @@ #include <scsi/scsi_host.h> #include "fdomain.h" -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 0f0e112..d414207 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -47,7 +47,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_ioctl.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index f0fc6ba..c1cf7f4 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -48,7 +48,6 @@ #include <scsi/scsi_host.h> #include "../qlogicfas408.h" -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index a511641..bd79e45 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -71,7 +71,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_host.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index ab17c08..2b99c7b 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -45,7 +45,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 51275aa..06f04b4 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -20,7 +20,6 @@ #include <linux/mmc/sdio_func.h> #include <linux/slab.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c index e72f404..2152030 100644 --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -13,7 +13,6 @@ #include <linux/io.h> #include <linux/etherdevice.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index 0d6c028..9738cad 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -17,7 +17,6 @@ #include <linux/pci.h> #include <linux/io.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index cfeb11f..acef29c 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -37,7 +37,6 @@ Status: experimental #include <linux/delay.h> #include <linux/pci.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 8761a6d..3eddb7c 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -48,7 +48,6 @@ Command support does not exist, but could be added for this board. #include "das08.h" /* pcmcia includes */ -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 6ec77bf..f3c4d2f 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -47,7 +47,6 @@ IRQ is assigned but not used. #include <linux/ioport.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index e4865b1..f0c4367 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -48,7 +48,6 @@ the PCMCIA interface. #include "8255.h" -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 163245e..1ee78f8 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -71,7 +71,6 @@ NI manuals: #include "comedi_fc.h" #include "ni_labpc.h" -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index 3a46f0c..0bce220 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -48,7 +48,6 @@ See the notes in the ni_atmio.o driver. #include "ni_stc.h" #include "8255.h" -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index a91db6c..67c0fa6 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -50,7 +50,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308 #include "../comedidev.h" #include <linux/semaphore.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 10abd40..afe4575 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -83,7 +83,6 @@ #include <linux/if_arp.h> #include <linux/ioport.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/staging/wlags49_h2/wl_internal.h b/drivers/staging/wlags49_h2/wl_internal.h index d9a0ad0..02f0a20 100644 --- a/drivers/staging/wlags49_h2/wl_internal.h +++ b/drivers/staging/wlags49_h2/wl_internal.h @@ -69,7 +69,6 @@ ******************************************************************************/ #include <linux/version.h> #ifdef BUS_PCMCIA -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index 99cb224..f6c7e6f 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -8,7 +8,6 @@ #include <linux/errno.h> /* error codes */ #include <linux/slab.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 58cb73c..acb7e25 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -20,7 +20,6 @@ #include <linux/ioport.h> #include <linux/platform_device.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> @@ -43,8 +42,6 @@ MODULE_LICENSE("GPL"); /* VARIABLES */ /*====================================================================*/ -static const char driver_name[DEV_NAME_LEN] = "sl811_cs"; - typedef struct local_info_t { struct pcmcia_device *p_dev; } local_info_t; @@ -246,7 +243,7 @@ MODULE_DEVICE_TABLE(pcmcia, sl811_ids); static struct pcmcia_driver sl811_cs_driver = { .owner = THIS_MODULE, .drv = { - .name = (char *)driver_name, + .name = "sl811_cs", }, .probe = sl811_cs_probe, .remove = sl811_cs_detach, diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h index cfdd5af..1c5088c 100644 --- a/include/pcmcia/cistpl.h +++ b/include/pcmcia/cistpl.h @@ -15,6 +15,8 @@ #ifndef _LINUX_CISTPL_H #define _LINUX_CISTPL_H +typedef unsigned char cisdata_t; + #define CISTPL_NULL 0x00 #define CISTPL_DEVICE 0x01 #define CISTPL_LONGLINK_CB 0x02 diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index c943c96..c78d9b1 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -43,14 +43,6 @@ typedef struct conf_reg_t { #define CV_COPY_VALUE 0x08 #define CV_EXT_STATUS 0x10 -/* For GetFirst/NextClient */ -typedef struct client_req_t { - socket_t Socket; - u_int Attributes; -} client_req_t; - -#define CLIENT_THIS_SOCKET 0x01 - /* ModifyConfiguration */ typedef struct modconf_t { u_int Attributes; @@ -133,7 +125,7 @@ typedef struct io_req_t { /* For GetMemPage, MapMemPage */ typedef struct memreq_t { u_int CardOffset; - page_t Page; + u_short Page; } memreq_t; /* For ModifyWindow */ diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h deleted file mode 100644 index f5e3b83..0000000 --- a/include/pcmcia/cs_types.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * cs_types.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * The initial developer of the original code is David A. Hinds - * <dahinds(a)users.sourceforge.net>. Portions created by David A. Hinds - * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - * - * (C) 1999 David A. Hinds - */ - -#ifndef _LINUX_CS_TYPES_H -#define _LINUX_CS_TYPES_H - -#ifdef __KERNEL__ -#include <linux/types.h> -#else -#include <sys/types.h> -#endif - -typedef u_short socket_t; -typedef u_int event_t; -typedef u_char cisdata_t; -typedef u_short page_t; - -typedef unsigned long window_handle_t; - -struct region_t; -typedef struct region_t *memory_handle_t; - -#ifndef DEV_NAME_LEN -#define DEV_NAME_LEN 32 -#endif - -typedef char dev_info_t[DEV_NAME_LEN]; - -#endif /* _LINUX_CS_TYPES_H */ diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 7d7721e..e614aa0 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -20,7 +20,6 @@ #include <linux/mod_devicetable.h> #endif -#include <pcmcia/cs_types.h> #include <pcmcia/device_id.h> #ifdef __KERNEL__ @@ -37,6 +36,8 @@ struct pcmcia_device; struct config_t; struct net_device; +typedef unsigned long window_handle_t; + /* dynamic device IDs for PCMCIA device drivers. See * Documentation/pcmcia/driver.txt for details. */ diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index aeac271..626b63c 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -19,7 +19,6 @@ #include <linux/sched.h> /* task_struct, completion */ #include <linux/mutex.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #ifdef CONFIG_CARDBUS #include <linux/pci.h> diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.h b/sound/pcmcia/pdaudiocf/pdaudiocf.h index a0a7ec6..5cc3e45 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.h +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.h @@ -24,7 +24,6 @@ #include <sound/pcm.h> #include <asm/io.h> #include <linux/interrupt.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/sound/pcmcia/vx/vxpocket.h b/sound/pcmcia/vx/vxpocket.h index ea4df16..d911066 100644 --- a/sound/pcmcia/vx/vxpocket.h +++ b/sound/pcmcia/vx/vxpocket.h @@ -23,7 +23,6 @@ #include <sound/vx_core.h> -#include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> -- 1.7.0.4

1 0

[alsa-devel] [PATCH] soc/imx/Kconfig: update to latest changes in Kconfig option names
by Eric Bénard 06 Aug '10

06 Aug '10

Signed-off-by: Eric Bénard <eric(a)eukrea.com> --- sound/soc/imx/Kconfig | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig index 52dac5e..687c76f 100644 --- a/sound/soc/imx/Kconfig +++ b/sound/soc/imx/Kconfig @@ -28,7 +28,9 @@ config SND_SOC_PHYCORE_AC97 config SND_SOC_EUKREA_TLV320 tristate "Eukrea TLV320" - depends on MACH_EUKREA_MBIMX27_BASEBOARD || MACH_EUKREA_MBIMXSD_BASEBOARD + depends on MACH_EUKREA_MBIMX27_BASEBOARD \ + || MACH_EUKREA_MBIMXSD25_BASEBOARD \ + || MACH_EUKREA_MBIMXSD35_BASEBOARD select SND_SOC_TLV320AIC23 help Enable I2S based access to the TLV320AIC23B codec attached -- 1.6.3.3

2 4

Re: [alsa-devel] Question about WM8974 codec driver--Incorrect setup of dapm_route
by Mark Brown 05 Aug '10

05 Aug '10

On Thu, Aug 05, 2010 at 11:16:18PM +0800, jjinfo(a)nudt.edu.cn wrote: Please fix your mail client to word wrap text, it makes your mail vastly more legible. I've reflowed your text into 80 columns. > Recently I've been working on porting alsa-driver-1.0.22 to support > wm8974 codec with Freescale Mx27ipcam platform. By now the playback > channel can work as expected. But the capture stream can't work and > there is no data from the codec DAI interface.(Acutally, it is always > low level.) Please try a version of the driver from current kernel versions (you'll probably need a little backporting). I do not recommend using alsa-driver for any embedded audio work, there are usually interdependencies with CPU code in the CPU sides of the drivers. > In the codec driver(wm8974.c), I note there is a potentioal problem > with the audio route setup.In the definition of struct > snd_soc_dapm_route audio_map[], the "Input PGA" is connected directly > to "Boost Mixer" as follows: { > "Boost Mixer" > , NULL, > "Input PGA" > }, (Line 260). > However, according to the wm8974 hardware manual, the connection > between Input PGA and Boost Mixer IS controlled by a switch, > INPPGAMUTE(R45[6]). This looks like a potential issue, yes. Have you tried testing? > Another problem in wm8974.c, bit 6 of Register WM8974_INPPGA is > defined as "Aux Switch"(line 191), and bit 2 of Register WM8974_INOUT > is also defined as "Aux Switch"(line 196). Will these two same names > cause any problem? (Since both the audio path from "Aux Input" to > "Input PGA"(line 264) and the autio path from "Aux Input" to "Boost > Mixer" use "Aux Switch", how can we distinguish from them?) Without looking at the driver version you're using I'm not 100% certain but I believe both of these are controls for mixers. Mixers controls have the name of the mixer prepended to thekm when presented to the API.

1 0

[alsa-devel] [PATCH] asoc/multi-component: fsl: fix exit and error paths in DMA and SSI drivers
by Timur Tabi 05 Aug '10

05 Aug '10

The error handling code in the OF probe function of the SSI driver is not freeing all resources correctly. Since the machine driver no longer calls the DMA driver to provide information about the SSI, we don't need to keep a list of DMA objects any more. In addition, the fsl_soc_dma_remove() function is incorrectly removing *all* DMA objects when it should only remove one. Signed-off-by: Timur Tabi <timur(a)freescale.com> --- sound/soc/fsl/fsl_dma.c | 23 +++++++---------------- sound/soc/fsl/fsl_ssi.c | 29 ++++++++++++++++------------- 2 files changed, 23 insertions(+), 29 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 4450f9d..57774cb 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -57,7 +57,6 @@ SNDRV_PCM_RATE_CONTINUOUS) struct dma_object { - struct list_head list; struct snd_soc_platform_driver dai; dma_addr_t ssi_stx_phys; dma_addr_t ssi_srx_phys; @@ -825,9 +824,6 @@ static void fsl_dma_free_dma_buffers(struct snd_pcm *pcm) } } -/* List of DMA nodes that we've probed */ -static LIST_HEAD(dma_list); - /** * find_ssi_node -- returns the SSI node that points to his DMA channel node * @@ -915,25 +911,20 @@ static int __devinit fsl_soc_dma_probe(struct of_device *of_dev, dma->channel = of_iomap(np, 0); dma->irq = irq_of_parse_and_map(np, 0); - list_add(&dma->list, &dma_list); + + dev_set_drvdata(&of_dev->dev, dma); return 0; } static int __devexit fsl_soc_dma_remove(struct of_device *of_dev) { - struct list_head *n, *ptr; - struct dma_object *dma; + struct dma_object *dma = dev_get_drvdata(&of_dev->dev); - list_for_each_safe(ptr, n, &dma_list) { - dma = list_entry(ptr, struct dma_object, list); - list_del_init(ptr); - - snd_soc_unregister_platform(&of_dev->dev); - iounmap(dma->channel); - irq_dispose_mapping(dma->irq); - kfree(dma); - } + snd_soc_unregister_platform(&of_dev->dev); + iounmap(dma->channel); + irq_dispose_mapping(dma->irq); + kfree(dma); return 0; } diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 51b089f..00e3e62 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -619,7 +619,7 @@ static int __devinit fsl_ssi_probe(struct of_device *of_dev, { struct fsl_ssi_private *ssi_private; int ret = 0; - struct device_attribute *dev_attr; + struct device_attribute *dev_attr = NULL; struct device_node *np = of_dev->dev.of_node; const char *p, *sprop; struct resource res; @@ -681,18 +681,16 @@ static int __devinit fsl_ssi_probe(struct of_device *of_dev, if (ret) { dev_err(&of_dev->dev, "could not create sysfs %s file\n", ssi_private->dev_attr.attr.name); - kfree(ssi_private); - return ret; + goto error; } /* Register with ASoC */ dev_set_drvdata(&of_dev->dev, ssi_private); ret = snd_soc_register_dai(&of_dev->dev, &ssi_private->cpu_dai_drv); - if (ret != 0) { + if (ret) { dev_err(&of_dev->dev, "failed to register DAI: %d\n", ret); - kfree(ssi_private); - return ret; + goto error; } /* Trigger the machine driver's probe function. The platform driver @@ -713,18 +711,23 @@ static int __devinit fsl_ssi_probe(struct of_device *of_dev, if (IS_ERR(ssi_private->pdev)) { ret = PTR_ERR(ssi_private->pdev); dev_err(&of_dev->dev, "failed to register platform: %d\n", ret); - kfree(ssi_private); - return ret; + goto error; } return 0; + +error: + snd_soc_unregister_dai(&of_dev->dev); + dev_set_drvdata(&of_dev->dev, NULL); + if (dev_attr) + device_remove_file(&of_dev->dev, dev_attr); + irq_dispose_mapping(ssi_private->irq); + iounmap(ssi_private->ssi); + kfree(ssi_private); + + return ret; } -/** - * fsl_ssi_destroy_dai: destroy the snd_soc_dai object - * - * This function undoes the operations of fsl_ssi_probe() - */ static int fsl_ssi_remove(struct of_device *of_dev) { struct fsl_ssi_private *ssi_private = dev_get_drvdata(&of_dev->dev); -- 1.7.0.1

3 2

[alsa-devel] [PATCH] asoc/multi-component: fsl: add support for disabled SSI nodes
by Timur Tabi 05 Aug '10

05 Aug '10

Add support for adding "status = disabled" to an SSI node to incidate that it is not wired on the board. This replaces the not-so-intuitive previous method of omitting a codec-handle property. Signed-off-by: Timur Tabi <timur(a)freescale.com> --- Kumar, would you please ACK the device-tree portion of this patch? I want it to go through the ALSA tree. arch/powerpc/boot/dts/mpc8610_hpcd.dts | 1 + sound/soc/fsl/fsl_ssi.c | 13 ++++++++++--- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 9535ce6..83c3218 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -286,6 +286,7 @@ ssi@16100 { compatible = "fsl,mpc8610-ssi"; + status = "disabled"; cell-index = <1>; reg = <0x16100 0x100>; interrupt-parent = <&mpic>; diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index a0e18b8..45d27b1 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -636,12 +636,19 @@ static int __devinit fsl_ssi_probe(struct of_device *of_dev, struct resource res; char name[64]; - /* We are only interested in SSIs with a codec phandle in them, so let's - * make sure this SSI has one. + /* SSIs that are not connected on the board should have a + * status = "disabled" + * property in their device tree nodes. */ - if (!of_get_property(np, "codec-handle", NULL)) + if (!of_device_is_available(np)) return -ENODEV; + /* Check for a codec-handle property. */ + if (!of_get_property(np, "codec-handle", NULL)) { + dev_err(&of_dev->dev, "missing codec-handle property\n"); + return -ENODEV; + } + /* We only support the SSI in "I2S Slave" mode */ sprop = of_get_property(np, "fsl,mode", NULL); if (!sprop || strcmp(sprop, "i2s-slave")) { -- 1.7.0.1

4 3

[alsa-devel] [PATCH v5 0/1] A codec driver for the TI WL1273 FM Radio.
by Matti J. Aaltonen 05 Aug '10

05 Aug '10

Hello. New in the fifth version: > > > +/* codec private data */ > > > +struct wl1273_priv { > > > + struct snd_soc_codec codec; > > > + enum wl1273_mode mode; > > > + struct wl1273_core *core; > > > + unsigned int channels; > > > +}; > > > > ...why would anything outside the driver be peering into this? > > Well, I see no reason... So I'll move it from the header to the c -file > and then it's fine? OK... that's most probably what you mean. So I've moved the private struct definition from the header to the code file. And following the same logic I also moved the mode enum definition. Cheers, Matti A. Matti J. Aaltonen (1): ASoC: TI WL1273 FM Radio Codec. sound/soc/codecs/wl1273.c | 552 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wl1273.h | 30 +++ 2 files changed, 582 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wl1273.c create mode 100644 sound/soc/codecs/wl1273.h

3 3

[alsa-devel] [PATCH] ASoC: multi-comp: soc-core: Fix for machine given DAPM widgets
by Peter Ujfalusi 05 Aug '10

05 Aug '10

Move the DAPM initialization after the machine driver has finished it's init (dai_link driver). Since in machine init we can add DAPM widgets we need to take them into account as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> --- Hello Liam, Mark! With this patch the machine driver given DAPM routing will be functional with the multi-comp. This patch also removes the need to call the snd_soc_dapm_sync from machine driver's init call, since it will be done by the core. Please squash this patch to the core changes. Thanks, Peter sound/soc/soc-core.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a7c9a48..8afa271 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1324,9 +1324,6 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) return ret; } } - /* Make sure all DAPM widgets are instantiated */ - snd_soc_dapm_new_widgets(codec); - /* mark codec as probed and add to card codec list */ codec->probed = 1; list_add(&codec->card_list, &card->codec_dev_list); @@ -1375,6 +1372,10 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) } } + /* Make sure all DAPM widgets are instantiated */ + snd_soc_dapm_new_widgets(codec); + snd_soc_dapm_sync(codec); + /* register the rtd device */ rtd->dev.init_name = rtd->dai_link->stream_name; rtd->dev.release = rtd_release; -- 1.7.2

3 2

[alsa-devel] arecord: main:552: audio open error: Invalid argument
by Timur Tabi 05 Aug '10

05 Aug '10

Liam and Mark, I created a log with some printks that kinda show what's going on. In one process I run speaker-test, and then I start arecord in another process. fsl_ssi_startup:286 substream=ef3e5000 playback=0 capture=0 fsl_ssi_startup:288 rtd=ef3a2c00 rate=0 fsl_ssi_startup:298 fsl_ssi_startup:373 first=(null) second=(null) fsl_ssi_startup:427 soc_pcm_open:381 fsl_dma_open:408 rtd=ef3a2c00 rate=0 soc_pcm_open:391 soc_pcm_open:402 soc_pcm_open:412 soc_pcm_open:463 soc_pcm_open:471 soc_pcm_open:477 soc_pcm_open:484 asoc: cs4270-hifi <-> e0016000.ssi info: asoc: rate mask 0x40001fff asoc: min ch 2 max ch 2 asoc: min rate 5512 max rate 192000 fsl_ssi_hw_params:450 Rate set to 48000Hz (requested 48000Hz) fsl_dma_hw_params:579 soc_pcm_hw_params:748 rtd=ef3a2c00 rate=48000 ... fsl_ssi_startup:286 substream=ef3e5300 playback=1 capture=0 fsl_ssi_startup:288 rtd=ef3a2d10 rate=0 fsl_ssi_startup:373 first=ef3e5000 second=(null) fsl_ssi_startup:411 runtime=ef4ba800 sample_bits=16 fsl_ssi_startup:427 soc_pcm_open:381 fsl_dma_open:408 rtd=ef3a2d10 rate=0 <<------ soc_pcm_open:391 soc_pcm_open:402 soc_pcm_open:412 soc_pcm_open:463 soc_pcm_open:471 soc_pcm_open:477 soc_pcm_open:484 soc_pcm_apply_symmetry:335 rtd=ef3a2d10 rate=0 capture: Symmetry forces 0Hz rate In summary, the problem appears to be that asoc calls soc_pcm_apply_symmetry() in soc_pcm_open(), but this occurs before soc_pcm_hw_params() can set rtd->rate. So rtd->rate is always zero when soc_pcm_apply_symmetry() is called. For some reason, this isn't a problem when arecord is started before speaker-test. In that case, rtd->rate is 48000 when speaker-test is started: fsl_ssi_startup:286 substream=ef3e5300 playback=0 capture=0 fsl_ssi_startup:288 rtd=ef3e6d10 rate=0 fsl_ssi_startup:298 fsl_ssi_startup:373 first=(null) second=(null) fsl_ssi_startup:427 soc_pcm_open:382 fsl_dma_open:408 rtd=ef3e6d10 rate=0 soc_pcm_open:392 soc_pcm_open:403 soc_pcm_open:413 soc_pcm_open:464 soc_pcm_open:472 soc_pcm_open:478 soc_pcm_open:485 asoc: cs4270-hifi <-> e0016000.ssi info: asoc: rate mask 0x40001fff asoc: min ch 2 max ch 2 asoc: min rate 5512 max rate 192000 fsl_ssi_hw_params:450 fsl_dma_hw_params:579 soc_pcm_hw_params:749 rtd=ef3e6d10 rate=48000 pop wq checking: Playback status: inactive waiting: yes ... fsl_ssi_startup:286 substream=ef3e5000 playback=0 capture=1 fsl_ssi_startup:288 rtd=ef3e6c00 rate=48000 fsl_ssi_startup:373 first=ef3e5300 second=(null) fsl_ssi_startup:411 runtime=ef4c6c00 sample_bits=16 fsl_ssi_startup:427 soc_pcm_open:382 fsl_dma_open:408 rtd=ef3e6c00 rate=48000 <<------ soc_pcm_open:392 soc_pcm_open:403 soc_pcm_open:413 soc_pcm_open:464 soc_pcm_open:472 soc_pcm_open:478 soc_pcm_open:485 soc_pcm_apply_symmetry:333 rtd=ef3e6c00 rate=48000 playback: Symmetry forces 48000Hz rate asoc: cs4270-hifi <-> e0016000.ssi info: asoc: rate mask 0x40001fff asoc: min ch 2 max ch 2 asoc: min rate 5512 max rate 192000 fsl_ssi_hw_params:450 Rate set to 48000Hz (requested 48000Hz) fsl_dma_hw_params:579 Buffer soc_pcm_hw_params:749 rtd=ef3e6c00 rate=48000

2 3

[alsa-devel] [PATCH 1/5] sound: serial-u16550: fix uninitialized variable warning
by Bill Pemberton 05 Aug '10

05 Aug '10

Fix sound/drivers/serial-u16550.c:905: warning: 'uart' may be used uninitialized in this function Signed-off-by: Bill Pemberton <wfp5p(a)virginia.edu> --- sound/drivers/serial-u16550.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c index a25fb7b..5f8ae28 100644 --- a/sound/drivers/serial-u16550.c +++ b/sound/drivers/serial-u16550.c @@ -902,7 +902,7 @@ static int __devinit snd_uart16550_rmidi(struct snd_uart16550 *uart, int device, static int __devinit snd_serial_probe(struct platform_device *devptr) { struct snd_card *card; - struct snd_uart16550 *uart; + struct snd_uart16550 *uninitialized_var(uart); int err; int dev = devptr->id; -- 1.7.2

3 6

[alsa-devel] Muting of the "Front" mixer control
by David Henningsson 05 Aug '10

05 Aug '10

Here's an interesting problem which I'm not sure whether it should be fixed in PulseAudio or the driver, but I'm starting here. I have a laptop with a HDA VIA VT1708 chip and would like auto-muting. VIA advertises auto-muting by changing the "Front Playback Switch" (see sound/pci/hda/patch_via.c:2023, via_hp_automute). Now PulseAudio's default mixer path, "analog-output", treats "Front" as part of the volume merge chain, which in this case is incorrect, and so when the switch gets muted, PA thinks that the chain is muted and gets confused (as in: no sound output, and PA advertises to g-v-c and others that it is now muted). It seems to me like from PA's perspective the name should have been "Speaker Playback Switch" instead, but VIA does not seem to use "Speaker" at all, and BIOS seems to have set up my caps for Speaker as "Line out", so I'm not sure if this is the right way to do it. For reference, here's my alsa-info: http://launchpadlibrarian.net/53047763/alsa-info.txt.JUhgxH8rDZ -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 1

[alsa-devel] [PATCH v4 0/1] A codec driver for the TI WL1273 FM Radio.
by Matti J. Aaltonen 05 Aug '10

05 Aug '10

Hello, and thank you for the comments... Now I've created the patch against the multi component branch. I haven't been able to test the codec but I thought that it makes sense to send the code for review anyway. Liam wrote: > Btw, now that we have a naming convention for components how about this > having a "-radio" or "-fm" device suffix ? Now the name is set to "wl1273-fm". Thanks, Matti Matti J. Aaltonen (1): ASoC: TI WL1273 FM Radio Codec. sound/soc/codecs/wl1273.c | 542 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wl1273.h | 40 ++++ 2 files changed, 582 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wl1273.c create mode 100644 sound/soc/codecs/wl1273.h

2 3

Re: [alsa-devel] [LAD] announcing envy24control, mudita (*) edition.
by Niels Mayer 05 Aug '10

05 Aug '10

On Sat, Jul 31, 2010 at 12:06 PM, Tim E. Real <termtech(a)rogers.com> wrote: > Niels do you have a new release or repo I can work with rather than > the original release, which may be too outdated to patch against by now? http://nielsmayer.com/envy24control/mudita24-1.0.1.tar.gz (source directory, follow README). Please give it a try and report on how this "release candidate" works for you. This 1.0.1 release should fix most of the problems/gripes/bugs/errors reported on linux-audio-devel. New command-line options "-g 1" allow multi-channel folk to get rid of the stereo grouping; those annoyed by the "detent" on the sliders or the extra space taken up by the markings, use "-n" to turn off this feature.. The main thing I haven't been able to resolve is Fons' complaint regarding the DAC Volumes in "Analog Volume" panel not all being the same height, due to a -10/+4 radiobox that only appears in first DAC column for the Terratec EWS88MT; this radiobox causes the associated slider to be shorter than the other channels. Shouldn't this radiobox appear in all DAC columns?. Is this a regression in "mudita24" or a feature request for standard "envy24control"? I didn't change this aspect of the code, as far as I can tell. -- Niels. http://nielsmayer.com

3 8

Re: [alsa-devel] Intel HDMI audio stops after 15 minutes
by Wu Fengguang 05 Aug '10

05 Aug '10

On Thu, Aug 05, 2010 at 01:35:09AM +0800, Shane W wrote: > Hey all, > > On my Intel DG45 mainboard (Yamaha RX-v1800 receiver) I am > now only getting audio for about 15 minutes before it stops > and I have to restart the X server. Playing a movie with > audio works fine but playing an mp3 has the cutout. Is > there a new power saving mode or the like that has crept > in? Did the screen go off at the same time? I was also fighting with it with a bunch of options Section "Monitor" Identifier "Configured Monitor" option "DPMS" "false" EndSection Section "ServerFlags" # minutes Option "BlankTime" "100" Option "StandbyTime" "300" Option "SuspendTime" "400" Option "OffTime" "500" EndSection Thanks, Fengguang

2 1

[alsa-devel] als4000: enable burst mode
by Ondrej Zary 05 Aug '10

05 Aug '10

Enable burst mode to prevent dropouts during high PCI bus usage. The card is useless in X without this because of dropouts when anything moves on the screen (at least with PCI VGA card). Enabling this is also recommended by the datasheet (page 48). Signed-off-by: Ondrej Zary <linux(a)rainbow-software.org> --- linux-2.6.35-rc2/sound/pci/als4000.c 2010-06-06 05:43:24.000000000 +0200 +++ linux-2.6.35-rc3/sound/pci/als4000.c 2010-08-03 23:50:08.000000000 +0200 @@ -763,9 +763,9 @@ static void snd_als4000_configure(struct /* SPECS_PAGE: 39 */ for (i = ALS4K_GCR91_DMA0_ADDR; i <= ALS4K_GCR96_DMA3_MODE_COUNT; ++i) snd_als4k_gcr_write(chip, i, 0); - + /* enable burst mode to prevent dropouts during high PCI bus usage */ snd_als4k_gcr_write(chip, ALS4K_GCR99_DMA_EMULATION_CTRL, - snd_als4k_gcr_read(chip, ALS4K_GCR99_DMA_EMULATION_CTRL)); + snd_als4k_gcr_read(chip, ALS4K_GCR99_DMA_EMULATION_CTRL) | 0x04); spin_unlock_irq(&chip->reg_lock); } -- Ondrej Zary

2 5

Re: [alsa-devel] [LAD] announcing envy24control, mudita (*) edition.
by Niels Mayer 05 Aug '10

05 Aug '10

On Wed, Aug 4, 2010 at 12:00 PM, Tim E. Real <termtech(a)rogers.com> wrote: > Something odd. Are you sure about those digital mixer ranges? Yep. > They now go down to only -48dB instead of -144dB. > Seems like 2/3 of the range is missing? Truncated. At least for my purposes, the original faders w/ 144dB dynamic range and linear mapping on the controls made the "business end" of the gain -- the top 20-30dB -- occur over far to few pixels to be controllable via mouse. At the same time the meters themselves go down to -48dB and there is the whole confusion about the scale-markings on the analog sliders versus the meters. Now there's none. And the "top end" of the slider is now more easily controllable by mouse. The MIDI control and other more fine-grained control (e.g. via , e.g. alsamixer-qt4, alsamixer, or other programs) is not affected. In this new 'mudita24' interface, the input is set "off" when then digital mixer input attenuator is moved below -48dB, but not via MIDI or other external control. Therefore if someone actually needs to mix an input at -48dB or lower, they can still use the MIDI controllers or a different mixer like alsamixer-qt4 to set those kind of levels. This seemed like a better compromise than wasting more than half the slider real-estate to changes that can't even be heard (unless you've got the volume turned way up). If this is particularly bothersome please let me know and I guess I'll add an option to give the full 0 to -144dB range back. However, if you're doing that kind of mixing, perhaps using a different mixer than the envy24's hardware mixer is more appropriate? > Also, the 'active' colour of the meters seems way too 'soft'? > Seems like just a slightly darker grey shade than the meter > background (although I know it's supposed to be blue). Yes, I see that this is very skin dependent and what is working for me isn't working for others. (Could you send a picture to show me what the coloration of your meters ends up like on your system?) Any suggestions on using a different built-in color so as to not worry about contrast or visibility issues? > This makes it very hard to see the meters in action. > A lighter shade of blue would make it look nice like a flourescent > type of display. Is there a known standard gnone name that can be applied to the foreground color? Alternately, how about options --meterfg and ---meterbg that allow you to specify the colors? > Also, sorry about this, I missed something in the ALSA dB reading > code I submitted: The index of the control: > > In volume.c: dac_volume_adjust() and adc_volume_adjust(), > remove the clear() and set an index like this: > > snd_ctl_elem_id_t *elem_id; > snd_ctl_elem_id_alloca(&elem_id); > //snd_ctl_elem_id_clear(elem_id); // TER: Removed > snd_ctl_elem_id_set_interface(elem_id, SND_CTL_ELEM_IFACE_MIXER); > snd_ctl_elem_id_set_name(elem_id, DAC_VOLUME_NAME); > snd_ctl_elem_id_set_index(elem_id, idx); // TER: Added > long db_gain = 0; > > And in mixer.c: mixer_volume_to_db() > remove the clear() and set an index: > > snd_ctl_elem_id_t *elem_id; > snd_ctl_elem_id_alloca(&elem_id); > //snd_ctl_elem_id_clear(elem_id); // TER: Removed > snd_ctl_elem_id_set_interface(elem_id, SND_CTL_ELEM_IFACE_MIXER); > > /* IEC958_MULTI_CAPTURE_VOLUME, for stream=19 or 20 gives incorrect > results, use HW_MULTI_CAPTURE_VOLUME for all */ > // Verified by TER. Those two controls have no dB values, but they should, > // they're just part of the same mixer ! > // snd_ctl_elem_id_set_name(elem_id, (stream <= 10) ? > // MULTI_PLAYBACK_VOLUME : (stream <= 18 ? HW_MULTI_CAPTURE_VOLUME : > // IEC958_MULTI_CAPTURE_VOLUME)); > snd_ctl_elem_id_set_name(elem_id, (stream <= 10) ? MULTI_PLAYBACK_VOLUME : > HW_MULTI_CAPTURE_VOLUME); > > // TER: First line is 'proper' way, but second line is corrected > // workaround for lack of dB values for IEC958 controls. > //snd_ctl_elem_id_set_index(elem_id, stream <= 18 ? (stream - 1) % 10 : > // (stream - 1) % 18 ); > snd_ctl_elem_id_set_index(elem_id, stream <= 18 ? (stream - 1) % 10 : 0 ); > I'll have to look into this one... seems like a 1.0.2 is inevitable... ----- > With the ice1712 digital mixer, it is not so crucial that we pay attention to > what ALSA tells us about those controls. > Setting an index with snd_ctl_elem_id_set_index() is not crucial. > After all, this app is specifically for ice1712 and nothing else, so we know > that it's always going to be an ice1712 chip, so we can take advantage > of this, and 'hard-code' the digital mixer scale markings and other things. > The ADC/DAC section however, is a different matter. > Here is where we must pay attention to ALSA because we don't know > what kind of codec chips may be used. > We can't even assume that all controls in a group have the same range so > to be safe we must use snd_ctl_elem_id_set_index(). > Granted, envy24control does use some card-specific code for some tricks, > but to support new cards with yet-unknown codecs, we must trust ALSA. > If we wanted utmost dB accuracy, we'd have to use card-specific code for > the AK4524 chip for example, due to the broken ALSA TLV functionality, > as Clements mentioned in another thread. > These are the approaches I'm using in my re-work of the scales and page snaps. We're all looking forward to these improvements. > And finally, a reminder (also to myself) to try to avoid using newer gtk > functions because this app is 'supposed' to be able to built with gtk-1. > Those 'built-in' GtkScale marker functions are new since 2.16, and likely the > app could not be built with gtk-1. > I guess bumping up to a minimum of gtk+-2.0 might be OK though, > as it is the year 2010... Anyone still using gtk+-1.x ? I think it makes sense to update the minimum to gtk+-2.0 .. I'm not sure what the ALSA folk think. Also my use of gtk_label_set_markup() is another one of these newer functions. -- Niels. http://nielsmayer.com

1 0

Re: [alsa-devel] Intel HDMI audio stops after 15 minutes
by Paul Menzel 04 Aug '10

04 Aug '10

Dear Shane, Am Mittwoch, den 04.08.2010, 10:35 -0700 schrieb Shane W: > On my Intel DG45 mainboard (Yamaha RX-v1800 receiver) I am > now only getting audio for about 15 minutes before it stops > and I have to restart the X server. Playing a movie with > audio works fine but playing an mp3 has the cutout. Is > there a new power saving mode or the like that has crept > in? from your message I am guessing that it worked before. If that was true, it would the developers if you told them the versions of the relevant components (ALSA, Linux, …). Thanks, Paul

1 0

Re: [alsa-devel] [PATCH 5/5] ASoC: fix uninitialized variable
by Mark Brown 04 Aug '10

04 Aug '10

On Wed, Aug 04, 2010 at 08:59:49AM -0400, Bill Pemberton wrote: > > No, just stomping over the variable to shut up the warning doesn't > > improve anything at all. You need to make sure that the compiler can > > actually follow the control flow to see that the data is always > > initialised rather than disabling the check and missing any actual > > issues. > I did, hence the comment in the commit that the variable is > initialized by fll_factors(). You're completely missing the point here. What I said was that you need to make sure that the *compiler* can actually follow the control flow. You've not done that, you've stomped over the warning to shut both this and any valid warnings related to the structure up.

1 0

[alsa-devel] [GIT PULL] Updates for 2.6.36
by Liam Girdwood 04 Aug '10

04 Aug '10

Hi Takashi, A last update for 2.6.36. Thanks Liam --- The following changes since commit 116bcd9cf22c00c22402c2a2be6ef8e81289a574: Axel Lin (1): ASoC: wm9081: fix resource reclaim in wm9081_register error path are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6.git for-2.6.36 Peter Ujfalusi (1): ASoC: TWL4030: Capture route runtime DAPM ordering fix sound/soc/codecs/twl4030.c | 48 +++++++++++--------------------------------- 1 files changed, 12 insertions(+), 36 deletions(-)

2 1

[alsa-devel] [PATCH] ASoC: TWL4030: Capture route runtime DAPM ordering fix
by Peter Ujfalusi 04 Aug '10

04 Aug '10

Fix the ordering problem in DAPM domain, when the user changes between digital and analog sources during active capture (or loopback) scenario. Before this patch, when the user changed from analog source to digital there were a short time, when the codec enabled analog mic bias (2.2 volts) instead of the correct digital mic bias (1.8 volts) to the digital microphones. This behaviour caused by the former implementation of selecting the correct type of bias. This was done at the POST_REG event of the DAPM_MUX_E("TXx Capture Route") widget. By moving the bias type selection as DAPM_SUPPLY and connecting it to the corresponding digimic widget the problematic situation can be avoided. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> --- sound/soc/codecs/twl4030.c | 48 +++++++++++--------------------------------- 1 files changed, 12 insertions(+), 36 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index d401c59..7b618bb 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -577,36 +577,6 @@ static const struct snd_kcontrol_new twl4030_dapm_dbypassv_control = TWL4030_REG_VSTPGA, 0, 0x29, 0, twl4030_dapm_dbypassv_tlv); -static int micpath_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value; - unsigned char adcmicsel, micbias_ctl; - - adcmicsel = twl4030_read_reg_cache(w->codec, TWL4030_REG_ADCMICSEL); - micbias_ctl = twl4030_read_reg_cache(w->codec, TWL4030_REG_MICBIAS_CTL); - /* Prepare the bits for the given TX path: - * shift_l == 0: TX1 microphone path - * shift_l == 2: TX2 microphone path */ - if (e->shift_l) { - /* TX2 microphone path */ - if (adcmicsel & TWL4030_TX2IN_SEL) - micbias_ctl |= TWL4030_MICBIAS2_CTL; /* digimic */ - else - micbias_ctl &= ~TWL4030_MICBIAS2_CTL; - } else { - /* TX1 microphone path */ - if (adcmicsel & TWL4030_TX1IN_SEL) - micbias_ctl |= TWL4030_MICBIAS1_CTL; /* digimic */ - else - micbias_ctl &= ~TWL4030_MICBIAS1_CTL; - } - - twl4030_write(w->codec, TWL4030_REG_MICBIAS_CTL, micbias_ctl); - - return 0; -} - /* * Output PGA builder: * Handle the muting and unmuting of the given output (turning off the @@ -1430,12 +1400,10 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { /* Analog/Digital mic path selection. TX1 Left/Right: either analog Left/Right or Digimic0 TX2 Left/Right: either analog Left/Right or Digimic1 */ - SND_SOC_DAPM_MUX_E("TX1 Capture Route", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_micpathtx1_control, micpath_event, - SND_SOC_DAPM_POST_REG), - SND_SOC_DAPM_MUX_E("TX2 Capture Route", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_micpathtx2_control, micpath_event, - SND_SOC_DAPM_POST_REG), + SND_SOC_DAPM_MUX("TX1 Capture Route", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_micpathtx1_control), + SND_SOC_DAPM_MUX("TX2 Capture Route", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_micpathtx2_control), /* Analog input mixers for the capture amplifiers */ SND_SOC_DAPM_MIXER("Analog Left", @@ -1459,6 +1427,11 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { TWL4030_REG_ADCMICSEL, 3, 0, NULL, 0, digimic_event, SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_SUPPLY("micbias1 select", TWL4030_REG_MICBIAS_CTL, 5, 0, + NULL, 0), + SND_SOC_DAPM_SUPPLY("micbias2 select", TWL4030_REG_MICBIAS_CTL, 6, 0, + NULL, 0), + SND_SOC_DAPM_MICBIAS("Mic Bias 1", TWL4030_REG_MICBIAS_CTL, 0, 0), SND_SOC_DAPM_MICBIAS("Mic Bias 2", TWL4030_REG_MICBIAS_CTL, 1, 0), SND_SOC_DAPM_MICBIAS("Headset Mic Bias", TWL4030_REG_MICBIAS_CTL, 2, 0), @@ -1590,6 +1563,9 @@ static const struct snd_soc_dapm_route intercon[] = { {"Digimic0 Enable", NULL, "DIGIMIC0"}, {"Digimic1 Enable", NULL, "DIGIMIC1"}, + {"DIGIMIC0", NULL, "micbias1 select"}, + {"DIGIMIC1", NULL, "micbias2 select"}, + /* TX1 Left capture path */ {"TX1 Capture Route", "Analog", "ADC Physical Left"}, {"TX1 Capture Route", "Digimic0", "Digimic0 Enable"}, -- 1.7.2

3 2

[alsa-devel] [PATCH] asoc/multi-component: fsl: add support for 36-bit physical addresses
by Timur Tabi 04 Aug '10

04 Aug '10

Update the DMA driver used by the Freescale MPC8610 HPCD audio driver to support 36-bit physical addresses, for both DMA buffers and the SSI registers. The DMA driver calls snd_dma_alloc_pages() to allocate the DMA buffers for playback and capture. This function is just a front-end for dma_alloc_coherent(). Currently, dma_alloc_coherent() only allocates buffers in low memory (it ignores GFP_HIGHMEM), so we never actually get a DMA buffer with a real 36-bit physical address. Signed-off-by: Timur Tabi <timur(a)freescale.com> --- Liam, this patch should *not* be squashed into the rest of the changes for multi-component. sound/soc/fsl/fsl_dma.c | 77 +++++++++++++++++++++++++++++++---------------- 1 files changed, 51 insertions(+), 26 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index d09e194..4450f9d 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -175,13 +175,23 @@ static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private) struct fsl_dma_link_descriptor *link = &dma_private->link[dma_private->current_link]; - /* Update our link descriptors to point to the next period */ - if (dma_private->substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - link->source_addr = - cpu_to_be32(dma_private->dma_buf_next); - else - link->dest_addr = - cpu_to_be32(dma_private->dma_buf_next); + /* Update our link descriptors to point to the next period. On a 36-bit + * system, we also need to update the ESAD bits. We also set (keep) the + * snoop bits. See the comments in fsl_dma_hw_params() about snooping. + */ + if (dma_private->substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + link->source_addr = cpu_to_be32(dma_private->dma_buf_next); +#ifdef CONFIG_PHYS_64BIT + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP | + upper_32_bits(dma_private->dma_buf_next)); +#endif + } else { + link->dest_addr = cpu_to_be32(dma_private->dma_buf_next); +#ifdef CONFIG_PHYS_64BIT + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP | + upper_32_bits(dma_private->dma_buf_next)); +#endif + } /* Update our variables for next time */ dma_private->dma_buf_next += dma_private->period_size; @@ -273,11 +283,19 @@ static irqreturn_t fsl_dma_isr(int irq, void *dev_id) * This function is called when the codec driver calls snd_soc_new_pcms(), * once for each .dai_link in the machine driver's snd_soc_card * structure. + * + * snd_dma_alloc_pages() is just a front-end to dma_alloc_coherent(), which + * (currently) always allocates the DMA buffer in lowmem, even if GFP_HIGHMEM + * is specified. Therefore, any DMA buffers we allocate will always be in low + * memory, but we support for 36-bit physical addresses anyway. + * + * Regardless of where the memory is actually allocated, since the device can + * technically DMA to any 36-bit address, we do need to set the DMA mask to 36. */ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai, struct snd_pcm *pcm) { - static u64 fsl_dma_dmamask = DMA_BIT_MASK(32); + static u64 fsl_dma_dmamask = DMA_BIT_MASK(36); int ret; if (!card->dev->dma_mask) @@ -609,12 +627,7 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, link->count = cpu_to_be32(period_size); - /* Even though the DMA controller supports 36-bit addressing, - * for simplicity we allow only 32-bit addresses for the audio - * buffer itself. This was enforced in fsl_dma_new() with the - * DMA mask. - * - * The snoop bit tells the DMA controller whether it should tell + /* The snoop bit tells the DMA controller whether it should tell * the ECM to snoop during a read or write to an address. For * audio, we use DMA to transfer data between memory and an I/O * device (the SSI's STX0 or SRX0 register). Snooping is only @@ -629,20 +642,24 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, * flush out the data for the previous period. So if you * increased period_bytes_min to a large enough size, you might * get more performance by not snooping, and you'll still be - * okay. + * okay. You'll need to update fsl_dma_update_pointers() also. */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { link->source_addr = cpu_to_be32(temp_addr); - link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP | + upper_32_bits(temp_addr)); link->dest_addr = cpu_to_be32(ssi_sxx_phys); - link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_NOSNOOP); + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_NOSNOOP | + upper_32_bits(ssi_sxx_phys)); } else { link->source_addr = cpu_to_be32(ssi_sxx_phys); - link->source_attr = cpu_to_be32(CCSR_DMA_ATR_NOSNOOP); + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_NOSNOOP | + upper_32_bits(ssi_sxx_phys)); link->dest_addr = cpu_to_be32(temp_addr); - link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP | + upper_32_bits(temp_addr)); } temp_addr += period_size; @@ -673,10 +690,23 @@ static snd_pcm_uframes_t fsl_dma_pointer(struct snd_pcm_substream *substream) dma_addr_t position; snd_pcm_uframes_t frames; - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + /* Obtain the current DMA pointer, but don't read the ESAD bits if we + * only have 32-bit DMA addresses. This function is typically called + * in interrupt context, so we need to optimize it. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { position = in_be32(&dma_channel->sar); - else +#ifdef CONFIG_PHYS_64BIT + position |= (u64)(in_be32(&dma_channel->satr) & + CCSR_DMA_ATR_ESAD_MASK) << 32; +#endif + } else { position = in_be32(&dma_channel->dar); +#ifdef CONFIG_PHYS_64BIT + position |= (u64)(in_be32(&dma_channel->datr) & + CCSR_DMA_ATR_ESAD_MASK) << 32; +#endif + } /* * When capture is started, the SSI immediately starts to fill its FIFO. @@ -936,11 +966,6 @@ static void __exit fsl_soc_dma_exit(void) of_unregister_platform_driver(&fsl_soc_dma_driver); } -/* We want the DMA driver to be initialized before the SSI driver, so that - * when the SSI driver calls fsl_soc_dma_dai_from_node(), the DMA driver - * will already have been probed. The easiest way to do that is to make the - * __init function called via arch_initcall(). - */ module_init(fsl_soc_dma_init); module_exit(fsl_soc_dma_exit); -- 1.7.0.1

2 1

Re: [alsa-devel] Wrong channel order with multichannel HDMI on NVIDIA MCP7A
by Anssi Hannula 03 Aug '10

03 Aug '10

(restored CC) Kirjoitit tiistai, 3. elokuuta 2010 23:40:13: > On Tue, Aug 3, 2010 at 1:32 PM, Anssi Hannula <anssi.hannula(a)iki.fi> wrote: > > pl bossart kirjoitti tiistai, 3. elokuuta 2010 23:15:28: > >> > Well, this is one of my looong-standing TODOs. > >> > Originally I wanted to implement a new API to get/set the > >> > channel-mapping, mainly for HDMI. > >> > But, I've been recently too busy for other tasks (I can spend little > >> > time for ALSA), thus it's pending forever. > >> > >> You would only need an API to get the channel mapping. The HDMI sink > >> will report its speaker configuration through a CEA code (section 7.4 > >> of the spec), and if we parsed the EDID info we could present the > >> relevant channel order to user-space apps. > > > > I'm not sure I see how that will help with the problem of this thread, > > though, i.e. NVIDIA MCP7A hdmi codec apparently assuming audio being fed > > in windows channel order instead of alsa channel order. > > You can in theory specify the channel order in the InfoFrame (CA > field). If you had access to a register to program this, you would no > longer be tied to alsa or windows or whatever order. You would just > provide ALSA with the channels in the order you configured with the CA > code. The CA field is programmable, but the channel orders are predefined and no arbitrary channel formats are possible (see patch_hdmi.c or the related CEA spec). The nvhdmi MCP7x codec driver tries to specify a channel order by using the channel_id field in AC_VERB_SET_CHANNEL_STREAMID for the 4 slave digital converters, but it doesn't seem to have any effect (at least on hardware I have; confirmed by swapping the channel_ids around with no effect). -- Anssi Hannula

1 0

[alsa-devel] Wrong channel order with multichannel HDMI on MCP7A
by Anssi Hannula 03 Aug '10

03 Aug '10

Hi all! I have a motherboard with NVIDIA MCP7A HDMI audio. However, multichannel audio is not mapped properly into the HDMI order. On 5.1, I get RL in FC, RR in LFE, FC in RL, LFE in RR. Interestingly, this is not consistent with the ALSA channel order (FL FR RL RR FC LFE) being passed directly to HDMI (FL FR LFE FC RL RR). Instead it looks like there has been a waveformatex (FL FR FC LFE RL RR; windows?) => HDMI conversion instead of ALSA => HDMI. Same happens for 7.1. Is it possible to set the hardware to do an ALSA => HDMI conversion instead? If not, we should manually compensate for this somewhere, right? Somewhat relatedly, trying to output 4 channels results in silence only. Trying to output 3 or 5 channels triggers a timeout with I/O error, with the following in the kernel log: "ALSA pcm_lib.c:1757: playback write error (DMA or IRQ trouble?)" I used a git alsa-kmirror from few days ago on 2.6.35-rc4 for testing. Speaker-test and alsa-lib were 1.0.23. -- Anssi Hannula

4 12

[alsa-devel] Playback open error: Inappropriate ioctl for device
by John Simpson 03 Aug '10

03 Aug '10

On 7/13/10, Clemens Ladisch <clemens(a)ladisch.de> wrote: > John Simpson wrote: > > I've been trying to use the alsa-lib API, but I haven't been able to > > get anything to compile. > > > > ~/alsa/alsa-lib-1.0.22/test$ for f in *.c; do echo; cc $f 2>&1 | head -n2; done > > > ... > > Did I miss something? > > The makefile. > > If alsa-lib is installed correctly, the only option you need for your > own programs is -lasound. > > Ok, now I can compile several of the test programs, but I am still not able to generate sound. [1|user(a)Nokia-N810-43-7|~/alsa-lib-1.0.23/test]cc -lasound control.c -o control [1|user(a)Nokia-N810-43-7|~/alsa-lib-1.0.23/test]./control Soundcard #1: card - 0 id - 'EAC' driver - 'EAC' name - 'OMAP24xx EAC' longname - 'OMAP24xx EAC with codec TLV320AIC33' mixername - 'TLV320AIC33' components - '' PCM next device error: Inappropriate ioctl for device RAWMIDI next device error: Inappropriate ioctl for device [1|user(a)Nokia-N810-43-7|~/alsa-lib-1.0.23/test]cc -lasound pcm.c -o pcm [1|user(a)Nokia-N810-43-7|~/alsa-lib-1.0.23/test]./pcm Playback device is plughw:0,0 Stream parameters are 44100Hz, S16_LE, 1 channels Sine wave rate is 440.0000Hz Using transfer method: write Playback open error: Inappropriate ioctl for device [1|user(a)Nokia-N810-43-7|~/alsa-lib-1.0.23/test]cc -lasound pcm_min.c -o pcm_min [1|user(a)Nokia-N810-43-7|~/alsa-lib-1.0.23/test]./pcm_min Playback open error: Inappropriate ioctl for device I sure appreciate the help... I'm feeling a bit dense at the oment :-(

2 5

[alsa-devel] Regression 2.6.35: Intel N10/ICH 7 Family HDA (Realtek ALC662 rev1) beep broken
by Leandro Lucarella 03 Aug '10

03 Aug '10

Hi. I've upgraded from kernel 2.6.34 to 2.6.35 and the beep through the sound card stopped working. I found a very similar problem[1] (commit[2]). [1] http://lkml.org/lkml/2010/7/28/228 [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdi… I've tried to manually enabling the beep with the steps in the e-mail thread I found: # echo -n 1 > /sys/class/sound/hwC0D2/subsystem_id # echo -n 1 > /sys/class/sound/hwC0D2/reconfig But it didn't work (the beep still goes through the pcspkr). I've tried to naively (I'm not a kernel hacker, so I was just guessing) add a new entry with the quirks beep_white_list by copying the entry for ASUS like this: diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 596ea2f..ca3ed12 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5183,6 +5183,7 @@ static void fillup_priv_adc_nids(struct hda_codec *codec, hda_nid_t *nid static struct snd_pci_quirk beep_white_list[] = { SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1), + SND_PCI_QUIRK(0x8086, 0xd613, "INTEL", 1), {} }; But it didn't work either. Then I noticed, if I'm understanding the source code (sound/pci/hda/patch_realtek.c) and documentation (Documentation/sound/alsa/HD-Audio-Models.txt) right, that my card is not present in the models listing, but it worked fine in 2.6.34 (and previous) kernel(s). I would appreciate if somebody can give me some hints on how to get the beep back. Thank you. Here is some data about my card, please let me know (Cc me please) if you need any other information. # lspci -vvs00:1b.0 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Intel Corporation Device d613 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at d0600000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 4181 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: HDA Intel # cat /proc/asound/card0/codec#2 Codec: Realtek ALC662 rev1 Address: 2 Function Id: 0x1 Vendor Id: 0x10ec0662 Subsystem Id: 0x8086d613 Revision Id: 0x100101 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC662 rev1 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x19 0x19] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x19 0x19] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="ALC662 rev1 Digital", type="SPDIF", device=1 Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Control: name="Capture Switch", index=1, device=0 Control: name="Capture Volume", index=1, device=0 Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x89 0x89] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Control: name="Capture Switch", index=0, device=0 Control: name="Capture Volume", index=0, device=0 Device: name="ALC662 rev1 Analog", type="Audio", device=0 Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x15 0x15] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x04 0x0b Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001003c: IN OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014410: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0c Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0d Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000034: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0e Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Control: name="Mic Boost", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00001734: IN OUT Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x01a19830: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x0e Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Control: name="Front Mic Boost", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000173c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x02a19931: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0e Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000034: IN OUT Detect Pin Default 0x0181303f: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x3, Sequence = 0xf Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0d Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000173c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x0221451f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Misc = NO_PRESENCE Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 2 0x0c 0x0e* Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x00000020: IN Pin Default 0x4004c601: [N/A] Line Out at Ext N/A Conn = RCA, Color = UNKNOWN DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x00000010: OUT Pin Default 0x99430120: [Fixed] SPDIF Out at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=12 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=1, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono -- Leandro Lucarella (AKA luca) http://llucax.com.ar/ ---------------------------------------------------------------------- GPG Key: 5F5A8D05 (F8CD F9A7 BF00 5431 4145 104C 949E BFB6 5F5A 8D05) ---------------------------------------------------------------------- Novocaine for the soul you better give me something to fill the hole before I sputter out

2 6

[alsa-devel] Device name hints and the value of DEV
by Anssi Hannula 03 Aug '10

03 Aug '10

Hi all! I was confused as to why on one of my boxes "aplay -L" says hdmi:CARD=NVidia,DEV=0 and on another it says hdmi:CARD=NVidia I looked into it, and saw that namehint.c:add_card() loops through the pcm device numbers using snd_ctl_pcm_next_device(), and then proceeds in try_config() to append ',DEV=device_number' to the device name. However, in reality DEV does not match the device number, as e.g. DEV=0 may mean the '0' in HDA-Intel.pcm.hdmi.0, and the slave pcm of that is device 3, not device 0. If there is no device 0 on the NVidia card, the 'hdmi:CARD=NVidia,DEV=0' entry is never added (instead the one without ",DEV=0" is), even though these are not really related.. Now, I don't have a good understanding of all the code in namehint.c, but surely the occupied device numbers should not have any side-effects like this? -- Anssi Hannula

1 0

[alsa-devel] Rates/formats available upstream from the plug plugin
by Pavel Hofman 03 Aug '10

03 Aug '10

Hi, mplayer checks hw_params for availability of the current format http://mplayer-ww.git.sourceforge.net/git/gitweb.cgi?p=mplayer-ww/mplayer-w… . If the check fails, it uses 16bits as fixed default. Now if we define the card to be plughw:0, the check still fails for formats unsupported directly by the card. Which in fact is incorrect since the plug plugin takes care of most formats known. The same holds for sample rates. IMO either the plug plugin should reconfigure hw_params for upstream use, or mplayer should use a different API call for checking parameters of the actual alsa device (not just the hardware itself, as defined by its alsa driver) - which one? Thanks a lot, Pavel.

3 5

[alsa-devel] ASoC DaVinci voicecodec based on copyfromuser
by Raffaele Recalcati 03 Aug '10

03 Aug '10

In dm365 cpu it is not possible to run CQ93VC Voice Codec together with McBSP I2S peripheral, because they share the same dma event. With this patchset it is possible to run the CQ93VC Voice Codec using copyfromuser.

2 7

Re: [alsa-devel] Driver for AK4555 codec
by Mark Brown 03 Aug '10

03 Aug '10

On 29 Jul 2010, at 23:45, Yoran Brondsema <yoran.brondsema(a)gmail.com> wrote: > On 29 July 2010 20:42, Mark Brown <broonie(a)opensource.wolfsonmicro.com> wrote: > On Thu, Jul 29, 2010 at 09:18:43AM +0200, Yoran Brondsema wrote: Don't drop CCs to the mailing lists; if nothing else advice is often useful to other people searching the mailing list archives. > So my main question is whether I have to write this lpc3xxx-ak4555.c. It would be great if someone could clear me up on this. Yes, you'll have to write a driver for your machine. It says how the CODEC and CPU are wired up on your particular board - either component could also be used with another device, or another machine may have a different way of connecting the same components which requires a different setup.

2 2

[alsa-devel] [RFC 0/2] soc-dapm or TWL4030: Runtime DAPM ordering problem
by Peter Ujfalusi 03 Aug '10

03 Aug '10

Hello Mark, Liam, I'm facing the following problem with the TWL4030 codec: The order of DAPM register write order different in case, when I start a capture operation after setting up the routing, and when I change the routing during active capture. This is really visible, when I want to record from the digital microphone interface. Because of this ordering problem, when during active capture I switch to the digital mic from analog path, the codec would enable analog bias (2.2 volts) to the digital mic for a moment, and than later it will switch to the correct digital mic bias (1.8 volts). Since the twl4030 codec needs several bits in different registers to be changed, when I change between analog and digital input it is not that obvious how to get the correct ordering all the time. I have two different ways to fix this: A: by reordering how DAPM would handle control changes (patch 1) B: by changing TWL4030 internal DAPM widgets (patch 2) Obviously only one of the two patch is needed, and I'm really not sure if the change in soc-dapm is a correct one, since it will affect all codec driver, and could potentially cause unexpected glitches. Some more thoughts.. A: Reordering in soc-dapm. Currently this is how it works: A.1 Route setup, followed by capture - User selects the digimic0 interface (DAPM_MUX_E) ADCMICSEL: TX1IN_SEL->1 MUX_E(TX1 Capture Route) enum register selects digital path MICBIAS_CTL: MICBIAS1_CTL->1 MUX_E(TX1 Capture Route) POST_REG select digimic bias (1.8 volts) - Capture starts MICBIAS_CTL: MICBIAS1_EN->1 MICBIAS(Mic Bias 1) power enables the micbias1/digimic0 bias (1.8 volts) ADCMICSEL: DIGIMIC0_EN->1 PGA_E(Digimic0 Enable) power enable the digimic0 interface A.2 Changing from analog path to digital path during capture - User selects the digimic0 interface from analog source AVADC_CTL: ADCL_EN->0 PGA(ADC Physical Left) power turn off ADC left ANAMICL: MICAMPL_EN->0 MIXER(Analog Left) power turn off mic amp on analog path MICBIAS_CTL: MICBIAS1_EN->1 MICBIAS(Mic Bias 1) power enables the micbias1/digimic0 bias (2.2 volts) ADCMICSEL: DIGIMIC0_EN->1 PGA(Digimic0 Enable) power enable the digimic0 interface ADCMICSEL: TX1IN_SEL->1 MUX_E(TX1 Capture Route) enum register selects digital path MICBIAS_CTL: MICBIAS1_CTL->1 MUX_E(TX1 Capture Route) POST_REG select digimic bias (1.8 volts) With the reordering in soc-dapm, only the runtime order is going to change: A.2 ADCMICSEL: TX1IN_SEL->1 MUX_E(TX1 Capture Route) enum register selects digital path MICBIAS_CTL: MICBIAS1_CTL->1 MUX_E(TX1 Capture Route) POST_REG select digimic bias (1.8 volts) AVADC_CTL: ADCL_EN->0 PGA(ADC Physical Left) power turn off ADC left ANAMICL: MICAMPL_EN->0 MIXER(Analog Left) power turn off mic amp on analog path MICBIAS_CTL: MICBIAS1_EN->1 MICBIAS(Mic Bias 1) power enables the micbias1/digimic0 bias (1.8 volts) ADCMICSEL: DIGIMIC0_EN->1 PGA(Digimic0 Enable) power enable the digimic0 interface So first DAPM would do the change in the register, than goes on and check the needed things to be done in the DAPM tree. This works with the TWL codec, but I'm not sure what are the implication on other codecs. But from the ordering point of view now there is no difference between 'cold start' or runtime change in DAPM write sequence. B: Reordering in TWL4030 codec driver The sequence will look like this: B.1 Route setup, followed by capture - User selects the digimic0 interface (DAPM_MUX_E) ADCMICSEL: TX1IN_SEL->1 MUX(TX1 Capture Route) enum register selects digital path - Capture starts MICBIAS_CTL: MICBIAS1_CTL->1 SUPPLY(micbias1 select) power select digimic bias (1.8 volts) MICBIAS_CTL: MICBIAS1_EN->1 MICBIAS(Mic Bias 1) power enables the micbias1/digimic0 bias (1.8 volts) ADCMICSEL: DIGIMIC0_EN->1 PGA_E(Digimic0 Enable) power enable the digimic0 interface B.2 Changing from analog path to digital path during capture - User selects the digimic0 interface from analog source AVADC_CTL: ADCL_EN->0 PGA(ADC Physical Left) power turn off ADC left ANAMICL: MICAMPL_EN->0 MIXER(Analog Left) power turn off mic amp on analog path MICBIAS_CTL: MICBIAS1_CTL->1 SUPPLY(micbias1 select) power select digimic bias (1.8 volts) MICBIAS_CTL: MICBIAS1_EN->1 MICBIAS(Mic Bias 1) power enables the micbias1/digimic0 bias (1.8 volts) ADCMICSEL: DIGIMIC0_EN->1 PGA(Digimic0 Enable) power enable the digimic0 interface ADCMICSEL: TX1IN_SEL->1 MUX(TX1 Capture Route) enum register selects digital path In this case the order is still not the same, but at least I avoid feeding wrong bias to the digimic interface. I need either the soc-dapm.c patch _or_ the patch against twl4030 codec to solve my problem. Do you see another way to actually solve this problem? Which approach is acceptable for you? The series generated on top of (needs th previous TWL DAPM fix): git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6.git:for-2.6.36 Thank you, Peter --- Peter Ujfalusi (2): ASoC: soc-dapm: Reorder DAPM register write sequence ASoC: TWL4030: Capture route runtime DAPM ordering fix sound/soc/codecs/twl4030.c | 48 +++++++++++--------------------------------- sound/soc/soc-dapm.c | 41 ++++++++++++++++++++++-------------- 2 files changed, 37 insertions(+), 52 deletions(-) -- 1.7.2

2 9

[alsa-devel] [PATCH 1/2] ASoC: multi-component - Fix DAI ID scanning from device name
by Jarkko Nikula 03 Aug '10

03 Aug '10

Format string specifier ".%d" for sscanf cannot scan integer from a string "driver-name.123". Fix this by starting the scan from a position after "driver-name". Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- Liam. This is a trivial fix. No need for separate patch, just embed to your next multi-component update. I noticed this because dai->id in mcbsp_dai_probe was always zero. --- sound/soc/soc-core.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 5c10439..300a9b3 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2803,7 +2803,7 @@ static inline char *fmt_single_name(struct device *dev, int *id) found = strstr(name, dev->driver->name); if (found) { /* get ID */ - if (sscanf(found,".%d", id) == 1) { + if (sscanf(&found[strlen(dev->driver->name)], ".%d", id) == 1) { /* discard ID from name if ID == -1 */ if (*id == -1) -- 1.7.1

2 2

[alsa-devel] Bug 0005086 - no audio on built-in speakers (intel-hda with codec alc272)
by Pierre van Heerden 03 Aug '10

03 Aug '10

Hi I was advised to e-mail and inform you of the problem with my audio, even though I have submitted a tracker<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5086>. In short, no speaker_outs are being reported by the driver (intel-hda using the realtek alc272 codec), even in the latest release, so on my laptop (LG X130) I'm getting audio on the line-out jack but not on the built-in speakers. I've tried all the model= module parameters for the alc272 codec, none of them solved the problem. Please let me know if I can be of any assistance in solving this problem or if you need any further information from me. Kind regards Pierre van Heerden

1 0

[alsa-devel] [PATCH 0/2] ALSA: hda - support HDMI HBR passthrough
by Anssi Hannula 03 Aug '10

03 Aug '10

Hi all! This patchset adds support for passing through IEC 61937 encapsulated compressed audio at high bitrates (i.e. those over 6.144Mbps). At least TrueHD and DTS-HD are such formats. I've tested this using an NVIDIA hdmi codec and the following ffmpeg patch which adds support for TrueHD in its IEC 61937 muxer: http://lists.mplayerhq.hu/pipermail/ffmpeg-devel/2010-August/094317.html One needs to set the AES0 & 0x02 (non-audio) bit during playback so that the data is not transmitted as normal 8 channel PCM audio. --- Anssi Hannula (2): ALSA: hda - Set Stream Type in Stream Format according to AES0 ALSA: hda - Add support for HDMI HBR passthrough sound/pci/hda/hda_codec.c | 6 ++++- sound/pci/hda/hda_codec.h | 6 ++++- sound/pci/hda/hda_intel.c | 3 +- sound/pci/hda/patch_hdmi.c | 40 ++++++++++++++++++++++++++++++++++++++- sound/pci/hda/patch_intelhdmi.c | 3 +- sound/pci/hda/patch_nvhdmi.c | 3 +- 6 files changed, 53 insertions(+), 8 deletions(-)

2 5

[alsa-devel] ASoC updates for 2.6.36
by Mark Brown 03 Aug '10

03 Aug '10

The following changes since commit 988b0dc1547f9f6a7c8cae472cad0a55df31818c: Merge branch 'for-2.6.36' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc (2010-08-02 12:10:52 +0200) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.36 Axel Lin (12): ASoC: ad1836: fix a memory leak if another ad1836 is registered ASoC: ak4642: fix a memory leak if failed to initialise AK4642 ASoC: da7210: fix a memory leak if failed to initialise da7210 audio codec ASoC: wm8523: fix resource reclaim in wm8523_register error path ASoC: wm8711: fix a memory leak if another WM8711 is registered ASoC: wm8904: fix resource reclaim in wm8904_register error path ASoC: wm8940: fix a memory leak if wm8940_register return error ASoC: wm8955: fix resource reclaim in wm8955_register error path ASoC: wm8961: fix resource reclaim in wm8961_register error path ASoC: wm8974: fix a memory leak if another WM8974 is registered ASoC: wm8978: fix a memory leak if a wm8978_register fail ASoC: wm9081: fix resource reclaim in wm9081_register error path Ian Lartey (1): ASoC: Initial WM8741 CODEC driver sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ad1836.c | 1 + sound/soc/codecs/ak4642.c | 4 +- sound/soc/codecs/da7210.c | 8 +- sound/soc/codecs/wm8523.c | 10 +- sound/soc/codecs/wm8711.c | 3 +- sound/soc/codecs/wm8741.c | 579 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8741.h | 214 +++++++++++++++++ sound/soc/codecs/wm8904.c | 13 +- sound/soc/codecs/wm8940.c | 7 +- sound/soc/codecs/wm8955.c | 10 +- sound/soc/codecs/wm8961.c | 9 +- sound/soc/codecs/wm8974.c | 3 +- sound/soc/codecs/wm8978.c | 10 +- sound/soc/codecs/wm9081.c | 11 +- 16 files changed, 857 insertions(+), 31 deletions(-) create mode 100644 sound/soc/codecs/wm8741.c create mode 100644 sound/soc/codecs/wm8741.h

2 1

[alsa-devel] [PATCH] hda-emu: Include stdlib.h, needed for calloc
by David Henningsson 03 Aug '10

03 Aug '10

-- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 1

[alsa-devel] Auto-muting line-outs?
by David Henningsson 03 Aug '10

03 Aug '10

I'm getting bug reports from downstream about auto-muting not working, and when looking at some of them I find that the reason is that they have a headphone + line-out combination instead of headphone + speaker. Looking at commits such as 2a2ed0df, this is intentional. I'm not sure what the majority of users want or expect in this case though, of course the users who like it the way it is, aren't raising their voices. :-) Anyway, for users that really want auto-muting for their line-outs, would a suitable workaround to recommend them, be to tweak user_pin_config, turning the line-out into a speaker-out, or would that have undesirable side effects? -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

3 3

[PATCH] Include stdlib.h, needed for calloc
by David Henningsson 03 Aug '10

03 Aug '10

Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- hda-spec.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/hda-spec.c b/hda-spec.c index 6c4f045..2ff8b21 100644 --- a/hda-spec.c +++ b/hda-spec.c @@ -23,6 +23,7 @@ #include <stdio.h> #include <errno.h> #include <string.h> +#include <stdlib.h> #include "hda-types.h" #include "hda-log.h" -- 1.7.0.4 --------------060309010103090609080103--

1 0

[alsa-devel] ALC269 mixer nodes
by David Henningsson 03 Aug '10

03 Aug '10

Here's yet another ALC269 which I'm unsure of how to fix the right way. There is no way to enable the microphone, and I think the trouble has to do with that the auto parser does not check whether the node is a mixer or a selector. It might be that the "alc269" vs "alc269vb" detection is wrong as well (btw, what does vb stand for?). I unfortunately do not have the full alsa-info output, but the codec-proc is here: http://launchpadlibrarian.net/49076615/Card0.Codecs.codec.2.txt and PCI IDs: http://launchpadlibrarian.net/49076618/PciMultimedia.txt Thanks in advance, -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 4

[alsa-devel] [PATCH 1/2] FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
by Jerone Young 03 Aug '10

03 Aug '10

Sorry about the last two times. Something was really going wrong. The Lenovo X301 does not have the ability to connect to a docking station to use the SPDIF port. It also does not have the ability to do SPDIF though the headphone jack or Display Port jacks. This patch fixes it so this is not exposed for the X301 and users do think it has the ability to do SPDIF. I tested both headphone & display port jacks and it is not there. I have tested this patch and it works great. Also to add the other Thinkpads have different subsystem codec IDs. Here are examples: X301: http://launchpadlibrarian.net/31561902/Card0.Codecs.codec.0.txt X200: http://launchpadlibrarian.net/49055036/Card0.Codecs.codec.0.txt W500: http://launchpadlibrarian.net/36276057/Card0.Codecs.codec.0.txt Signed-off-by: Jerone Young <jerone.young(a)canonical.com> diff --git a/pci/hda/patch_conexant.c b/pci/hda/patch_conexant.c index c49030b..efca393 100644 --- a/pci/hda/patch_conexant.c +++ b/pci/hda/patch_conexant.c @@ -2004,6 +2004,11 @@ static int patch_cxt5051(struct hda_codec *codec) break; case CXT5051_LENOVO_X200: spec->init_verbs[0] = cxt5051_lenovo_x200_init_verbs; + /* Thinkpad X301 does not have S/PDIF wired and no ability + to use a docking station. */ + if (codec->subsystem_id == 0x17aa211f) { + spec->multiout.dig_out_nid = 0; + } break; case CXT5051_F700: spec->init_verbs[0] = cxt5051_f700_init_verbs;

2 1

[alsa-devel] [PATCH 2/2] Fix Thinkpad X300 so SPDIF is not exposed
by Jerone Young 03 Aug '10

03 Aug '10

Just as with the X301. The X300 does not have a way to do SPDIF either. It does not have a dock connector, nor does it have the SPDIF through the headphone jack. This patch fixes it so X300 does not show SPDIF, since it cannot do it. To add all Lenovo Thinkpads had different codec subsytem IDs: X300: http://launchpadlibrarian.net/34862838/Card0.Codecs.codec.0.txt Signed-off-by: Jerone Young <jerone.young(a)canonical.com> diff --git a/pci/hda/patch_analog.c b/pci/hda/patch_analog.c index afbe314..1fe6c77 100644 --- a/pci/hda/patch_analog.c +++ b/pci/hda/patch_analog.c @@ -3662,7 +3662,14 @@ static int patch_ad1984(struct hda_codec *codec) codec->patch_ops.build_pcms = ad1984_build_pcms; break; case AD1984_THINKPAD: - spec->multiout.dig_out_nid = AD1884_SPDIF_OUT; + if (codec->subsystem_id == 0x17aa20fb) { + /* Thinpad X300 does not have the ability to do SPDIF, + or attach to docking station to use SPDIF */ + spec->multiout.dig_out_nid = 0; + } + else { + spec->multiout.dig_out_nid = AD1884_SPDIF_OUT; + } spec->input_mux = &ad1984_thinkpad_capture_source; spec->mixers[0] = ad1984_thinkpad_mixers; spec->init_verbs[spec->num_init_verbs++] = ad1984_thinkpad_init_verbs;

1 0

[alsa-devel] [PATCH] [RESEND] FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
by Jerone Young 03 Aug '10

03 Aug '10

The Lenovo X301 does not have the ability to connect to a docking station to use the SPDIF port. It also does not have the ability to do SPDIF though the headphone jack or Display Port jacks. This patch fixes it so this is not exposed for the X301 and users do think it has the ability to do SPDIF. I tested both headphone & display port jacks and it is not there. I have tested this patch and it works great. Also to add the other Thinkpads have different subsystem codec IDs. Here are examples: X301: http://launchpadlibrarian.net/31561902/Card0.Codecs.codec.0.txt X200: http://launchpadlibrarian.net/49055036/Card0.Codecs.codec.0.txt W500: http://launchpadlibrarian.net/36276057/Card0.Codecs.codec.0.txt Signed-off-by: Jerone Young <jerone.young(a)canonical.com> diff --git a/pci/hda/patch_conexant.c b/pci/hda/patch_conexant.c index c49030b..abc320a 100644 @@ -2004,6 +2006,11 @@ static int patch_cxt5051(struct hda_codec *codec) break; case CXT5051_LENOVO_X200: spec->init_verbs[0] = cxt5051_lenovo_x200_init_verbs; + /* Thinkpad X301 does not have S/PDIF wired and no ability + to use a docking station. */ + if (codec->subsystem_id == 0x17aa211f) { + spec->multiout.dig_out_nid = 0; + } break; case CXT5051_F700: spec->init_verbs[0] = cxt5051_f700_init_verbs;

3 4

[alsa-devel] How to handle HBR pass-through? (new PCM_FORMAT?)
by Anssi Hannula 03 Aug '10

03 Aug '10

Hi all! Passing through compressed audio via a digital link (S/PDIF, HDMI) is done by encapsulating the audio in a constant-bitrate IEC-61937 format, which is then passed to alsa as a normal 16bit PCM stream. However, there is a new complication: Codecs that require an iec60958 frame rate higher than 192kHz (currently TrueHD/MLP and DTS-HD) need to be transmitted in HDMI (note that these can't be transmitted in normal S/PDIF at all) in a slightly different way. The transmission via HDMI is essentially the same as transmission of 8-channel PCM stream with sample rate of iec60958_frame_rate/4 (e.g. 192kHz for TrueHD), with the samples inside a HBR packet instead of standard audio sample packet. What this means is that if just the needed HBR bits are set in the audio driver, one can play back e.g. TrueHD by passing the IEC-61937 stream to ALSA as 192kHz 8-channel 16-bit PCM data; of course normal 8-channel PCM playback wouldn't work anymore then. So the driver would need to know if this is 8- channel PCM or 8-channel compressed audio. Which brings us to my question: How should the user be able to do this, i.e. inform the driver whether this is 8-channel PCM data or compressed audio data? One easy option would be to have a separate IEC61937_HBR format in ALSA which could be used for IEC-61937 streams represented as 8x 16-bit channels. If that would be considered too specific, we could add a more generic IEC61937 format, which is the same as above except that "normal" ( = "2 channel") IEC-61937 streams could be used as well. However, as normal IEC-61937 streams can be used with S/PDIF as well, we'd AFAICS need to add such format bit to all S/PDIF drivers or have a no-op converter to the more widely supported 16- bit PCM format. Technically, I guess, IEC61937 data should be considered 8-bit or 32-bit (which is the amount of data in a single IEC-60958 frame) 1-channel stream, but that would mean the needed sample rate values would be far higher, which would be confusing since 16-bit PCM samples would not be supported at those rates. Another possible option could be to have some ALSA device flag like AESx now are (I'm not sure how those are handled, maybe it wouldn't work). Or maybe we should have SND_PCM_SUBFORMAT_IEC61937 or SND_PCM_SUBFORMAT_NONPCM? What should be done? -- Anssi Hannula

3 6

[alsa-devel] [PATCH] FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
by Jerone Young 03 Aug '10

03 Aug '10

The Lenovo X301 does not have the ability to connect to a docking station to use the SPDIF port. It also does not have the ability to do SPDIF though the headphone jack or Display Port jacks. This patch fixes it so this is not exposed for the X301 and users do think it has the ability to do SPDIF. I tested both headphone & display port jacks and it is not there. I have tested this patch and it works great. Also to add the other Thinkpads have different subsystem codec IDs. Here are examples: X301: http://launchpadlibrarian.net/31561902/Card0.Codecs.codec.0.txt X200: http://launchpadlibrarian.net/49055036/Card0.Codecs.codec.0.txt W500: http://launchpadlibrarian.net/36276057/Card0.Codecs.codec.0.txt Signed-off-by: Jerone Young <jerone.young(a)canonical.com> @@ -2004,6 +2006,11 @@ static int patch_cxt5051(struct hda_codec *codec) break; case CXT5051_LENOVO_X200: spec->init_verbs[0] = cxt5051_lenovo_x200_init_verbs; + /* Thinkpad X301 does not have S/PDIF wired and no ability + to use a docking station. */ + if (codec->subsystem_id == 0x17aa211f) { + spec->multiout.dig_out_nid = 0; + } break; case CXT5051_F700: spec->init_verbs[0] = cxt5051_f700_init_verbs;

2 1

[alsa-devel] [GIT PULL] ASoC updates for 2.6.36
by Liam Girdwood 02 Aug '10

02 Aug '10

Hi Takashi, More updates for 2.6.36. Btw, when are you thinking of doing a pull request for 2.6.36 ? I'm doing a multi-component patch series later today and if all goes well it would be nice to get it in for the 2.6.36 merge window. Thanks Liam --- The following changes since commit a7e7cd5bd7d1e0134032b8db5e64ceb9dac8b3ca: Kuninori Morimoto (1): ASoC: da7210: Add HeadPhone Playback Volume control are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6.git for-2.6.36 Peter Ujfalusi (7): ASoC: TWL4030: Capture route DAPM event fix ASoC: tlv320dac33: Revisit the FIFO Mode1 handling ASoC: tlv320dac33: Add support for automatic FIFO configuration ASoC: omap-mcbsp: Restructure the code within omap_mcbsp_dai_hw_params ASoC: omap-mcbsp: Code cleanup in omap_mcbsp_dai_hw_params ASoC: omap-mcbsp: Support for sDMA packet mode ASoC: omap-mcbsp: Remove period size constraint in THRESHOLD mode include/sound/tlv320dac33-plat.h | 2 + sound/soc/codecs/tlv320dac33.c | 125 ++++++++++++++++++++++------------ sound/soc/codecs/twl4030.c | 2 - sound/soc/omap/omap-mcbsp.c | 137 +++++++++++++++++++++----------------- 4 files changed, 158 insertions(+), 108 deletions(-)

4 6

[alsa-devel] [PATCH] pcm_plug: fix comparison always true
by Anssi Hannula 02 Aug '10

02 Aug '10

Signed-off-by: Anssi Hannula <anssi.hannula(a)iki.fi> --- Fixes an obvious mistake which I noticed while reading the code. Untested. src/pcm/pcm_plug.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/src/pcm/pcm_plug.c b/src/pcm/pcm_plug.c index 967cf46..e9d2923 100644 --- a/src/pcm/pcm_plug.c +++ b/src/pcm/pcm_plug.c @@ -485,7 +485,7 @@ static int snd_pcm_plug_change_format(snd_pcm_t *pcm, snd_pcm_t **new, snd_pcm_p /* No conversion is needed */ if (clt->format == slv->format && clt->rate == slv->rate && - clt->channels == clt->channels) + clt->channels == slv->channels) return 0; if (snd_pcm_format_linear(slv->format)) { -- 1.7.2

2 1

[alsa-devel] [PATCH] Do not try to create speaker NIDs for ALC268 if there aren't any
by David Henningsson 02 Aug '10

02 Aug '10

The new warning gave a false alarm, now silenced. -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 1

[PATCH] Do not try to create speaker NIDs for ALC268 if there aren't any
by David Henningsson 02 Aug '10

02 Aug '10

Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 49c04fc..cf14b00 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -13216,7 +13216,7 @@ static int alc268_auto_create_multi_out_ctls(struct alc_spec *spec, HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT)); if (err < 0) return err; - } else { + } else if (nid) { err = alc268_new_analog_output(spec, nid, "Speaker", 0); if (err < 0) return err; -- 1.7.0.4 --------------040107040505080605020601--

1 0

[alsa-devel] [PATCH] ASoC: Initial WM8741 CODEC driver
by Ian Lartey 02 Aug '10

02 Aug '10

The WM8741 is a very high performance stereo DAC designed for audio applications such as professional recording systems, A/V receivers and high specification CD, DVD and home theatre systems. The device supports PCM data input word lengths from 16 to 32-bits and sampling rates up to 192kHz. The WM8741 also supports DSD bit-stream data format, in both direct DSD and PCM-converted DSD modes. TODO: Expand wm8741_set_dai_sysclk and rate_constraint members to allow for all supported sample rate / Master Clock frequency combinations. Fully enable control of supplies. Signed-off-by: Ian Lartey <ian(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm8741.c | 579 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8741.h | 214 +++++++++++++++++ 4 files changed, 799 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm8741.c create mode 100644 sound/soc/codecs/wm8741.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 55bc2be..83f5c67 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -50,6 +50,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8727 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI + select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI @@ -214,6 +215,9 @@ config SND_SOC_WM8728 config SND_SOC_WM8731 tristate +config SND_SOC_WM8741 + tristate + config SND_SOC_WM8750 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index d8d9eeb..5352409 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -35,6 +35,7 @@ snd-soc-wm8711-objs := wm8711.o snd-soc-wm8727-objs := wm8727.o snd-soc-wm8728-objs := wm8728.o snd-soc-wm8731-objs := wm8731.o +snd-soc-wm8741-objs := wm8741.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o snd-soc-wm8776-objs := wm8776.o @@ -103,6 +104,7 @@ obj-$(CONFIG_SND_SOC_WM8711) += snd-soc-wm8711.o obj-$(CONFIG_SND_SOC_WM8727) += snd-soc-wm8727.o obj-$(CONFIG_SND_SOC_WM8728) += snd-soc-wm8728.o obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o +obj-$(CONFIG_SND_SOC_WM8741) += snd-soc-wm8741.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o obj-$(CONFIG_SND_SOC_WM8776) += snd-soc-wm8776.o diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c new file mode 100644 index 0000000..b9ea890 --- /dev/null +++ b/sound/soc/codecs/wm8741.c @@ -0,0 +1,579 @@ +/* + * wm8741.c -- WM8741 ALSA SoC Audio driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Ian Lartey <ian(a)opensource.wolfsonmicro.com> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "wm8741.h" + +static struct snd_soc_codec *wm8741_codec; +struct snd_soc_codec_device soc_codec_dev_wm8741; + +#define WM8741_NUM_SUPPLIES 2 +static const char *wm8741_supply_names[WM8741_NUM_SUPPLIES] = { + "AVDD", + "DVDD", +}; + +#define WM8741_NUM_RATES 4 + +/* codec private data */ +struct wm8741_priv { + struct snd_soc_codec codec; + u16 reg_cache[WM8741_REGISTER_COUNT]; + struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES]; + unsigned int sysclk; + unsigned int rate_constraint_list[WM8741_NUM_RATES]; + struct snd_pcm_hw_constraint_list rate_constraint; +}; + +static const u16 wm8741_reg_defaults[WM8741_REGISTER_COUNT] = { + 0x0000, /* R0 - DACLLSB Attenuation */ + 0x0000, /* R1 - DACLMSB Attenuation */ + 0x0000, /* R2 - DACRLSB Attenuation */ + 0x0000, /* R3 - DACRMSB Attenuation */ + 0x0000, /* R4 - Volume Control */ + 0x000A, /* R5 - Format Control */ + 0x0000, /* R6 - Filter Control */ + 0x0000, /* R7 - Mode Control 1 */ + 0x0002, /* R8 - Mode Control 2 */ + 0x0000, /* R9 - Reset */ + 0x0002, /* R32 - ADDITONAL_CONTROL_1 */ +}; + + +static int wm8741_reset(struct snd_soc_codec *codec) +{ + return snd_soc_write(codec, WM8741_RESET, 0); +} + +static const DECLARE_TLV_DB_SCALE(dac_tlv_fine, -12700, 13, 0); +static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 400, 0); + +static const struct snd_kcontrol_new wm8741_snd_controls[] = { +SOC_DOUBLE_R_TLV("Fine Playback Volume", WM8741_DACLLSB_ATTENUATION, + WM8741_DACRLSB_ATTENUATION, 1, 255, 1, dac_tlv_fine), +SOC_DOUBLE_R_TLV("Playback Volume", WM8741_DACLMSB_ATTENUATION, + WM8741_DACRMSB_ATTENUATION, 0, 511, 1, dac_tlv), +}; + +static const struct snd_soc_dapm_widget wm8741_dapm_widgets[] = { +SND_SOC_DAPM_DAC("DACL", "Playback", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_DAC("DACR", "Playback", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_OUTPUT("VOUTLP"), +SND_SOC_DAPM_OUTPUT("VOUTLN"), +SND_SOC_DAPM_OUTPUT("VOUTRP"), +SND_SOC_DAPM_OUTPUT("VOUTRN"), +}; + +static const struct snd_soc_dapm_route intercon[] = { + { "VOUTLP", NULL, "DACL" }, + { "VOUTLN", NULL, "DACL" }, + { "VOUTRP", NULL, "DACR" }, + { "VOUTRN", NULL, "DACR" }, +}; + +static int wm8741_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8741_dapm_widgets, + ARRAY_SIZE(wm8741_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + return 0; +} + +static struct { + int value; + int ratio; +} lrclk_ratios[WM8741_NUM_RATES] = { + { 1, 256 }, + { 2, 384 }, + { 3, 512 }, + { 4, 768 }, +}; + + +static int wm8741_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); + + /* The set of sample rates that can be supported depends on the + * MCLK supplied to the CODEC - enforce this. + */ + if (!wm8741->sysclk) { + dev_err(codec->dev, + "No MCLK configured, call set_sysclk() on init\n"); + return -EINVAL; + } + + snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &wm8741->rate_constraint); + + return 0; +} + +static int wm8741_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); + u16 iface = snd_soc_read(codec, WM8741_FORMAT_CONTROL) & 0x1FC; + int i; + + /* Find a supported LRCLK ratio */ + for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { + if (wm8741->sysclk / params_rate(params) == + lrclk_ratios[i].ratio) + break; + } + + /* Should never happen, should be handled by constraints */ + if (i == ARRAY_SIZE(lrclk_ratios)) { + dev_err(codec->dev, "MCLK/fs ratio %d unsupported\n", + wm8741->sysclk / params_rate(params)); + return -EINVAL; + } + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x0001; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x0002; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= 0x0003; + break; + default: + dev_dbg(codec->dev, "wm8741_hw_params: Unsupported bit size param = %d", + params_format(params)); + return -EINVAL; + } + + dev_dbg(codec->dev, "wm8741_hw_params: bit size param = %d", + params_format(params)); + + snd_soc_write(codec, WM8741_FORMAT_CONTROL, iface); + return 0; +} + +static int wm8741_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); + unsigned int val; + int i; + + dev_dbg(codec->dev, "wm8741_set_dai_sysclk info: freq=%dHz\n", freq); + + wm8741->sysclk = freq; + + wm8741->rate_constraint.count = 0; + + for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { + dev_dbg(codec->dev, "index = %d, ratio = %d, freq = %d", + i, lrclk_ratios[i].ratio, freq); + + val = freq / lrclk_ratios[i].ratio; + /* Check that it's a standard rate since core can't + * cope with others and having the odd rates confuses + * constraint matching. + */ + switch (val) { + case 32000: + case 44100: + case 48000: + case 64000: + case 88200: + case 96000: + dev_dbg(codec->dev, "Supported sample rate: %dHz\n", + val); + wm8741->rate_constraint_list[i] = val; + wm8741->rate_constraint.count++; + break; + default: + dev_dbg(codec->dev, "Skipping sample rate: %dHz\n", + val); + } + } + + /* Need at least one supported rate... */ + if (wm8741->rate_constraint.count == 0) + return -EINVAL; + + return 0; +} + +static int wm8741_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = snd_soc_read(codec, WM8741_FORMAT_CONTROL) & 0x1C3; + + /* check master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x0008; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x0004; + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= 0x0003; + break; + case SND_SOC_DAIFMT_DSP_B: + iface |= 0x0013; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x0010; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x0020; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x0030; + break; + default: + return -EINVAL; + } + + + dev_dbg(codec->dev, "wm8741_set_dai_fmt: Format=%x, Clock Inv=%x\n", + fmt & SND_SOC_DAIFMT_FORMAT_MASK, + ((fmt & SND_SOC_DAIFMT_INV_MASK))); + + snd_soc_write(codec, WM8741_FORMAT_CONTROL, iface); + return 0; +} + +#define WM8741_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000) + +#define WM8741_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8741_dai_ops = { + .startup = wm8741_startup, + .hw_params = wm8741_hw_params, + .set_sysclk = wm8741_set_dai_sysclk, + .set_fmt = wm8741_set_dai_fmt, +}; + +struct snd_soc_dai wm8741_dai = { + .name = "WM8741", + .playback = { + .stream_name = "Playback", + .channels_min = 2, /* Mono modes not yet supported */ + .channels_max = 2, + .rates = WM8741_RATES, + .formats = WM8741_FORMATS, + }, + .ops = &wm8741_dai_ops, +}; +EXPORT_SYMBOL_GPL(wm8741_dai); + +#ifdef CONFIG_PM +static int wm8741_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + u16 *cache = codec->reg_cache; + int i; + + /* RESTORE REG Cache */ + for (i = 0; i < WM8741_REGISTER_COUNT; i++) { + if (cache[i] == wm8741_reg_defaults[i] || WM8741_RESET == i) + continue; + snd_soc_write(codec, i, cache[i]); + } + return 0; +} +#else +#define wm8741_suspend NULL +#define wm8741_resume NULL +#endif + +static int wm8741_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + if (wm8741_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } + + socdev->card->codec = wm8741_codec; + codec = wm8741_codec; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + snd_soc_add_controls(codec, wm8741_snd_controls, + ARRAY_SIZE(wm8741_snd_controls)); + wm8741_add_widgets(codec); + + return ret; + +pcm_err: + return ret; +} + +static int wm8741_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8741 = { + .probe = wm8741_probe, + .remove = wm8741_remove, + .resume = wm8741_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8741); + +static int wm8741_register(struct wm8741_priv *wm8741, + enum snd_soc_control_type control) +{ + int ret; + struct snd_soc_codec *codec = &wm8741->codec; + int i; + + if (wm8741_codec) { + dev_err(codec->dev, "Another WM8741 is registered\n"); + return -EINVAL; + } + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + snd_soc_codec_set_drvdata(codec, wm8741); + codec->name = "WM8741"; + codec->owner = THIS_MODULE; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = NULL; + codec->dai = &wm8741_dai; + codec->num_dai = 1; + codec->reg_cache_size = WM8741_REGISTER_COUNT; + codec->reg_cache = &wm8741->reg_cache; + + wm8741->rate_constraint.list = &wm8741->rate_constraint_list[0]; + wm8741->rate_constraint.count = + ARRAY_SIZE(wm8741->rate_constraint_list); + + memcpy(codec->reg_cache, wm8741_reg_defaults, + sizeof(wm8741->reg_cache)); + + ret = snd_soc_codec_set_cache_io(codec, 7, 9, control); + if (ret != 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + goto err; + } + + for (i = 0; i < ARRAY_SIZE(wm8741->supplies); i++) + wm8741->supplies[i].supply = wm8741_supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8741->supplies), + wm8741->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + goto err; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8741->supplies), + wm8741->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + goto err_get; + } + + ret = wm8741_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + goto err_enable; + } + + wm8741_dai.dev = codec->dev; + + /* Change some default settings - latch VU */ + wm8741->reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL; + wm8741->reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM; + wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL; + wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM; + + wm8741_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&wm8741_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } + + dev_dbg(codec->dev, "Successful registration\n"); + return 0; + +err_enable: + regulator_bulk_disable(ARRAY_SIZE(wm8741->supplies), wm8741->supplies); + +err_get: + regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies); + +err: + kfree(wm8741); + return ret; +} + +static void wm8741_unregister(struct wm8741_priv *wm8741) +{ + regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies); + + snd_soc_unregister_dai(&wm8741_dai); + snd_soc_unregister_codec(&wm8741->codec); + kfree(wm8741); + wm8741_codec = NULL; +} + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static __devinit int wm8741_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8741_priv *wm8741; + struct snd_soc_codec *codec; + + wm8741 = kzalloc(sizeof(struct wm8741_priv), GFP_KERNEL); + if (wm8741 == NULL) + return -ENOMEM; + + codec = &wm8741->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + + i2c_set_clientdata(i2c, wm8741); + codec->control_data = i2c; + + codec->dev = &i2c->dev; + + return wm8741_register(wm8741, SND_SOC_I2C); +} + +static __devexit int wm8741_i2c_remove(struct i2c_client *client) +{ + struct wm8741_priv *wm8741 = i2c_get_clientdata(client); + wm8741_unregister(wm8741); + return 0; +} + +static const struct i2c_device_id wm8741_i2c_id[] = { + { "wm8741", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8741_i2c_id); + + +static struct i2c_driver wm8741_i2c_driver = { + .driver = { + .name = "WM8741", + .owner = THIS_MODULE, + }, + .probe = wm8741_i2c_probe, + .remove = __devexit_p(wm8741_i2c_remove), + .id_table = wm8741_i2c_id, +}; +#endif + +static int __init wm8741_modinit(void) +{ + int ret; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&wm8741_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8741 I2C driver: %d\n", + ret); + } +#endif + return 0; +} +module_init(wm8741_modinit); + +static void __exit wm8741_exit(void) +{ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8741_i2c_driver); +#endif +} +module_exit(wm8741_exit); + +MODULE_DESCRIPTION("ASoC WM8741 driver"); +MODULE_AUTHOR("Ian Lartey <ian(a)opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8741.h b/sound/soc/codecs/wm8741.h new file mode 100644 index 0000000..fdef6ec --- /dev/null +++ b/sound/soc/codecs/wm8741.h @@ -0,0 +1,214 @@ +/* + * wm8741.h -- WM8423 ASoC driver + * + * Copyright 2010 Wolfson Microelectronics, plc + * + * Author: Ian Lartey <ian(a)opensource.wolfsonmicro.com> + * + * Based on wm8753.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8741_H +#define _WM8741_H + +/* + * Register values. + */ +#define WM8741_DACLLSB_ATTENUATION 0x00 +#define WM8741_DACLMSB_ATTENUATION 0x01 +#define WM8741_DACRLSB_ATTENUATION 0x02 +#define WM8741_DACRMSB_ATTENUATION 0x03 +#define WM8741_VOLUME_CONTROL 0x04 +#define WM8741_FORMAT_CONTROL 0x05 +#define WM8741_FILTER_CONTROL 0x06 +#define WM8741_MODE_CONTROL_1 0x07 +#define WM8741_MODE_CONTROL_2 0x08 +#define WM8741_RESET 0x09 +#define WM8741_ADDITIONAL_CONTROL_1 0x20 + +#define WM8741_REGISTER_COUNT 11 +#define WM8741_MAX_REGISTER 0x20 + +/* + * Field Definitions. + */ + +/* + * R0 (0x00) - DACLLSB_ATTENUATION + */ +#define WM8741_UPDATELL 0x0020 /* UPDATELL */ +#define WM8741_UPDATELL_MASK 0x0020 /* UPDATELL */ +#define WM8741_UPDATELL_SHIFT 5 /* UPDATELL */ +#define WM8741_UPDATELL_WIDTH 1 /* UPDATELL */ +#define WM8741_LAT_4_0_MASK 0x001F /* LAT[4:0] - [4:0] */ +#define WM8741_LAT_4_0_SHIFT 0 /* LAT[4:0] - [4:0] */ +#define WM8741_LAT_4_0_WIDTH 5 /* LAT[4:0] - [4:0] */ + +/* + * R1 (0x01) - DACLMSB_ATTENUATION + */ +#define WM8741_UPDATELM 0x0020 /* UPDATELM */ +#define WM8741_UPDATELM_MASK 0x0020 /* UPDATELM */ +#define WM8741_UPDATELM_SHIFT 5 /* UPDATELM */ +#define WM8741_UPDATELM_WIDTH 1 /* UPDATELM */ +#define WM8741_LAT_9_5_0_MASK 0x001F /* LAT[9:5] - [4:0] */ +#define WM8741_LAT_9_5_0_SHIFT 0 /* LAT[9:5] - [4:0] */ +#define WM8741_LAT_9_5_0_WIDTH 5 /* LAT[9:5] - [4:0] */ + +/* + * R2 (0x02) - DACRLSB_ATTENUATION + */ +#define WM8741_UPDATERL 0x0020 /* UPDATERL */ +#define WM8741_UPDATERL_MASK 0x0020 /* UPDATERL */ +#define WM8741_UPDATERL_SHIFT 5 /* UPDATERL */ +#define WM8741_UPDATERL_WIDTH 1 /* UPDATERL */ +#define WM8741_RAT_4_0_MASK 0x001F /* RAT[4:0] - [4:0] */ +#define WM8741_RAT_4_0_SHIFT 0 /* RAT[4:0] - [4:0] */ +#define WM8741_RAT_4_0_WIDTH 5 /* RAT[4:0] - [4:0] */ + +/* + * R3 (0x03) - DACRMSB_ATTENUATION + */ +#define WM8741_UPDATERM 0x0020 /* UPDATERM */ +#define WM8741_UPDATERM_MASK 0x0020 /* UPDATERM */ +#define WM8741_UPDATERM_SHIFT 5 /* UPDATERM */ +#define WM8741_UPDATERM_WIDTH 1 /* UPDATERM */ +#define WM8741_RAT_9_5_0_MASK 0x001F /* RAT[9:5] - [4:0] */ +#define WM8741_RAT_9_5_0_SHIFT 0 /* RAT[9:5] - [4:0] */ +#define WM8741_RAT_9_5_0_WIDTH 5 /* RAT[9:5] - [4:0] */ + +/* + * R4 (0x04) - VOLUME_CONTROL + */ +#define WM8741_AMUTE 0x0080 /* AMUTE */ +#define WM8741_AMUTE_MASK 0x0080 /* AMUTE */ +#define WM8741_AMUTE_SHIFT 7 /* AMUTE */ +#define WM8741_AMUTE_WIDTH 1 /* AMUTE */ +#define WM8741_ZFLAG_MASK 0x0060 /* ZFLAG - [6:5] */ +#define WM8741_ZFLAG_SHIFT 5 /* ZFLAG - [6:5] */ +#define WM8741_ZFLAG_WIDTH 2 /* ZFLAG - [6:5] */ +#define WM8741_IZD 0x0010 /* IZD */ +#define WM8741_IZD_MASK 0x0010 /* IZD */ +#define WM8741_IZD_SHIFT 4 /* IZD */ +#define WM8741_IZD_WIDTH 1 /* IZD */ +#define WM8741_SOFT 0x0008 /* SOFT MUTE */ +#define WM8741_SOFT_MASK 0x0008 /* SOFT MUTE */ +#define WM8741_SOFT_SHIFT 3 /* SOFT MUTE */ +#define WM8741_SOFT_WIDTH 1 /* SOFT MUTE */ +#define WM8741_ATC 0x0004 /* ATC */ +#define WM8741_ATC_MASK 0x0004 /* ATC */ +#define WM8741_ATC_SHIFT 2 /* ATC */ +#define WM8741_ATC_WIDTH 1 /* ATC */ +#define WM8741_ATT2DB 0x0002 /* ATT2DB */ +#define WM8741_ATT2DB_MASK 0x0002 /* ATT2DB */ +#define WM8741_ATT2DB_SHIFT 1 /* ATT2DB */ +#define WM8741_ATT2DB_WIDTH 1 /* ATT2DB */ +#define WM8741_VOL_RAMP 0x0001 /* VOL_RAMP */ +#define WM8741_VOL_RAMP_MASK 0x0001 /* VOL_RAMP */ +#define WM8741_VOL_RAMP_SHIFT 0 /* VOL_RAMP */ +#define WM8741_VOL_RAMP_WIDTH 1 /* VOL_RAMP */ + +/* + * R5 (0x05) - FORMAT_CONTROL + */ +#define WM8741_PWDN 0x0080 /* PWDN */ +#define WM8741_PWDN_MASK 0x0080 /* PWDN */ +#define WM8741_PWDN_SHIFT 7 /* PWDN */ +#define WM8741_PWDN_WIDTH 1 /* PWDN */ +#define WM8741_REV 0x0040 /* REV */ +#define WM8741_REV_MASK 0x0040 /* REV */ +#define WM8741_REV_SHIFT 6 /* REV */ +#define WM8741_REV_WIDTH 1 /* REV */ +#define WM8741_BCP 0x0020 /* BCP */ +#define WM8741_BCP_MASK 0x0020 /* BCP */ +#define WM8741_BCP_SHIFT 5 /* BCP */ +#define WM8741_BCP_WIDTH 1 /* BCP */ +#define WM8741_LRP 0x0010 /* LRP */ +#define WM8741_LRP_MASK 0x0010 /* LRP */ +#define WM8741_LRP_SHIFT 4 /* LRP */ +#define WM8741_LRP_WIDTH 1 /* LRP */ +#define WM8741_FMT_MASK 0x000C /* FMT - [3:2] */ +#define WM8741_FMT_SHIFT 2 /* FMT - [3:2] */ +#define WM8741_FMT_WIDTH 2 /* FMT - [3:2] */ +#define WM8741_IWL_MASK 0x0003 /* IWL - [1:0] */ +#define WM8741_IWL_SHIFT 0 /* IWL - [1:0] */ +#define WM8741_IWL_WIDTH 2 /* IWL - [1:0] */ + +/* + * R6 (0x06) - FILTER_CONTROL + */ +#define WM8741_ZFLAG_HI 0x0080 /* ZFLAG_HI */ +#define WM8741_ZFLAG_HI_MASK 0x0080 /* ZFLAG_HI */ +#define WM8741_ZFLAG_HI_SHIFT 7 /* ZFLAG_HI */ +#define WM8741_ZFLAG_HI_WIDTH 1 /* ZFLAG_HI */ +#define WM8741_DEEMPH_MASK 0x0060 /* DEEMPH - [6:5] */ +#define WM8741_DEEMPH_SHIFT 5 /* DEEMPH - [6:5] */ +#define WM8741_DEEMPH_WIDTH 2 /* DEEMPH - [6:5] */ +#define WM8741_DSDFILT_MASK 0x0018 /* DSDFILT - [4:3] */ +#define WM8741_DSDFILT_SHIFT 3 /* DSDFILT - [4:3] */ +#define WM8741_DSDFILT_WIDTH 2 /* DSDFILT - [4:3] */ +#define WM8741_FIRSEL_MASK 0x0007 /* FIRSEL - [2:0] */ +#define WM8741_FIRSEL_SHIFT 0 /* FIRSEL - [2:0] */ +#define WM8741_FIRSEL_WIDTH 3 /* FIRSEL - [2:0] */ + +/* + * R7 (0x07) - MODE_CONTROL_1 + */ +#define WM8741_MODE8X 0x0080 /* MODE8X */ +#define WM8741_MODE8X_MASK 0x0080 /* MODE8X */ +#define WM8741_MODE8X_SHIFT 7 /* MODE8X */ +#define WM8741_MODE8X_WIDTH 1 /* MODE8X */ +#define WM8741_OSR_MASK 0x0060 /* OSR - [6:5] */ +#define WM8741_OSR_SHIFT 5 /* OSR - [6:5] */ +#define WM8741_OSR_WIDTH 2 /* OSR - [6:5] */ +#define WM8741_SR_MASK 0x001C /* SR - [4:2] */ +#define WM8741_SR_SHIFT 2 /* SR - [4:2] */ +#define WM8741_SR_WIDTH 3 /* SR - [4:2] */ +#define WM8741_MODESEL_MASK 0x0003 /* MODESEL - [1:0] */ +#define WM8741_MODESEL_SHIFT 0 /* MODESEL - [1:0] */ +#define WM8741_MODESEL_WIDTH 2 /* MODESEL - [1:0] */ + +/* + * R8 (0x08) - MODE_CONTROL_2 + */ +#define WM8741_DSD_GAIN 0x0040 /* DSD_GAIN */ +#define WM8741_DSD_GAIN_MASK 0x0040 /* DSD_GAIN */ +#define WM8741_DSD_GAIN_SHIFT 6 /* DSD_GAIN */ +#define WM8741_DSD_GAIN_WIDTH 1 /* DSD_GAIN */ +#define WM8741_SDOUT 0x0020 /* SDOUT */ +#define WM8741_SDOUT_MASK 0x0020 /* SDOUT */ +#define WM8741_SDOUT_SHIFT 5 /* SDOUT */ +#define WM8741_SDOUT_WIDTH 1 /* SDOUT */ +#define WM8741_DOUT 0x0010 /* DOUT */ +#define WM8741_DOUT_MASK 0x0010 /* DOUT */ +#define WM8741_DOUT_SHIFT 4 /* DOUT */ +#define WM8741_DOUT_WIDTH 1 /* DOUT */ +#define WM8741_DIFF_MASK 0x000C /* DIFF - [3:2] */ +#define WM8741_DIFF_SHIFT 2 /* DIFF - [3:2] */ +#define WM8741_DIFF_WIDTH 2 /* DIFF - [3:2] */ +#define WM8741_DITHER_MASK 0x0003 /* DITHER - [1:0] */ +#define WM8741_DITHER_SHIFT 0 /* DITHER - [1:0] */ +#define WM8741_DITHER_WIDTH 2 /* DITHER - [1:0] */ + +/* + * R32 (0x20) - ADDITONAL_CONTROL_1 + */ +#define WM8741_DSD_LEVEL 0x0002 /* DSD_LEVEL */ +#define WM8741_DSD_LEVEL_MASK 0x0002 /* DSD_LEVEL */ +#define WM8741_DSD_LEVEL_SHIFT 1 /* DSD_LEVEL */ +#define WM8741_DSD_LEVEL_WIDTH 1 /* DSD_LEVEL */ +#define WM8741_DSD_NO_NOTCH 0x0001 /* DSD_NO_NOTCH */ +#define WM8741_DSD_NO_NOTCH_MASK 0x0001 /* DSD_NO_NOTCH */ +#define WM8741_DSD_NO_NOTCH_SHIFT 0 /* DSD_NO_NOTCH */ +#define WM8741_DSD_NO_NOTCH_WIDTH 1 /* DSD_NO_NOTCH */ + +#define WM8741_SYSCLK 0 + +extern struct snd_soc_dai wm8741_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8741; + +#endif -- 1.7.0.4

2 1

[alsa-devel] [RFC 0/4] ASoC: OMAP3: Extended threshold mode
by Peter Ujfalusi 02 Aug '10

02 Aug '10

Hello, The following series extends the current threshold implementation for OMAP3 class of devices. The original threshold implementation has limitation on the size of the period, which can not be bigger than the McBSP port's FIFO size. This limitation makes it hard to use any power saving on McBSP ports other than McBSP2 (McBSP2 has 1280 word buffer, other ports have only 128 word long buffer), since the maximum period size limit is really small. After the series the limitation on the period size can be lifted, so user space can ask for any period size on any of the McBSP ports. In order to achieve this, I introduce the following changes, when McBSP is in threshold mode: if (period_words <= max_threshold) Configure the McBSP/sDMA as it used to be: McBSP threshold = sDMA frame size = period size sDMA packet size = 0 Otherwise (period_words > max_threshold) McBSP threshold = sDMA packet size sDMA frame size = period size In this case the code will look for the biggest possible threshold value, which can evenly divide the period size, and use that for threshold/packet size. The first two patch is for preparation. The series has been generated against: git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git:topic/asoc What do you think? --- Peter Ujfalusi (4): ASoC: omap-mcbsp: Code cleanup in omap_mcbsp_dai_hw_params ASoC: omap-mcbsp: Restructure the code within omap_mcbsp_dai_hw_params ASoC: omap-mcbsp: Support for sDMA packet mode ASoC: omap-mcbsp: Remove period size constraint in THRESHOLD mode sound/soc/omap/omap-mcbsp.c | 137 ++++++++++++++++++++++++------------------- 1 files changed, 76 insertions(+), 61 deletions(-) -- 1.7.2

4 7

[alsa-devel] [PATCH] Correct audio problem for Hauppage HVR-850 and others rel. to urb data align.
by John S Gruber 02 Aug '10

02 Aug '10

Match usb ids in usb/quirks-table.h for some Hauppage HVR-950Q models and for the HVR850 model to those ids at the end of au0828-cards.c Thanks to nhJm449 for pointing out the problem. Signed-off-by: John S Gruber <JohnSGruber(a)gmail.com> --- sound/usb/quirks-table.h | 30 ++++++++++++++++++++++-------- 1 files changed, 22 insertions(+), 8 deletions(-) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index f8797f6..2e8003f 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2152,7 +2152,21 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - USB_DEVICE_VENDOR_SPEC(0x2040, 0x7201), + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7240), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Hauppauge", + .product_name = "HVR-850", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_AUDIO_ALIGN_TRANSFER, + } +}, +{ + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7210), .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, @@ -2166,7 +2180,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - USB_DEVICE_VENDOR_SPEC(0x2040, 0x7202), + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7217), .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, @@ -2180,7 +2194,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - USB_DEVICE_VENDOR_SPEC(0x2040, 0x7203), + USB_DEVICE_VENDOR_SPEC(0x2040, 0x721b), .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, @@ -2194,7 +2208,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - USB_DEVICE_VENDOR_SPEC(0x2040, 0x7204), + USB_DEVICE_VENDOR_SPEC(0x2040, 0x721e), .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, @@ -2208,7 +2222,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - USB_DEVICE_VENDOR_SPEC(0x2040, 0x7205), + USB_DEVICE_VENDOR_SPEC(0x2040, 0x721f), .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, @@ -2222,7 +2236,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - USB_DEVICE_VENDOR_SPEC(0x2040, 0x7250), + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7280), .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, @@ -2236,7 +2250,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { - USB_DEVICE_VENDOR_SPEC(0x2040, 0x7230), + USB_DEVICE_VENDOR_SPEC(0x0fd9, 0x0008), .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, @@ -2244,7 +2258,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { .vendor_name = "Hauppauge", - .product_name = "HVR-850", + .product_name = "HVR-950Q", .ifnum = QUIRK_ANY_INTERFACE, .type = QUIRK_AUDIO_ALIGN_TRANSFER, } -- 1.7.0.4

2 1

[alsa-devel] underruns and POLLERR when copying audio frames
by Stefan Schoenleitner 02 Aug '10

02 Aug '10

Hi, I have some code that basically captures audio frames from one device and then writes it for playback to another device. Ideally mmapped IO could be used for such a task, but in my application this is not possible at the moment, as at least one of the audio devices does not support it. In my application copying audio frames works with a poll() based approach: If the capture device is ready for reading, a new audio frame is being read. And if there is a new captured frame available AND the playback device is ready, then it is written to the playback device. So far so good, the approach works. However, it doesn't take long until poll() on the playback device returns POLLERR since an underrun has occurred. If I just ignore POLLERR, then the next write operation to the playback device fails and I need to snd_pcm_recover(). My question is how to avoid these underruns. Basically I have two ideas: 1. The avail_min parameter specifies when the playback device should start to play buffered frames back. Hence if for example avail_min=160, then the playback device would wait until at least 160 frames have been written to the playback device (i.e. to the internal buffer) and then start with playing back these frames. My idea would be to just increment avail_min to something bigger, so that more frames are being buffered before playback starts. Would this work ? 2. Another idea would be to do some buffering on my own in the application. Thus I would first capture a number of frames and write them to a FIFO buffer. Once the buffer has been filled with enough frames, I would start to write them to the playback device. Therefore while the FIFO is being drained on the one side (playback), it is also refilled on the other side (capture). * So, which of these ideas do you think is better in terms of avoiding underruns ? To me it seems that both solutions would lead to the same results. Yet just setting avail_min to something higher seems to be the easier solution as it does not require me to implement a buffering solution on my own. cheers, stefan

3 5

[alsa-devel] [PATCH 04/11] pcmcia: do not use io_req_t after call to pcmcia_request_io()
by Dominik Brodowski 01 Aug '10

01 Aug '10

After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev(a)vger.kernel.org CC: linux-wireless(a)vger.kernel.org CC: linux-ide(a)vger.kernel.org CC: linux-usb(a)vger.kernel.org CC: laforge(a)gnumonks.org CC: linux-mtd(a)lists.infradead.org CC: linux-bluetooth(a)vger.kernel.org CC: alsa-devel(a)alsa-project.org CC: linux-serial(a)vger.kernel.org Signed-off-by: Dominik Brodowski <linux(a)dominikbrodowski.net> --- drivers/ata/pata_pcmcia.c | 8 +++--- drivers/bluetooth/bluecard_cs.c | 18 ++++++++-------- drivers/bluetooth/bt3c_cs.c | 8 +++--- drivers/bluetooth/btuart_cs.c | 12 +++++----- drivers/bluetooth/dtl1_cs.c | 13 ++++++----- drivers/char/pcmcia/cm4000_cs.c | 12 +++++----- drivers/char/pcmcia/cm4040_cs.c | 16 +++++++------- drivers/char/pcmcia/ipwireless/main.c | 10 +++----- drivers/char/pcmcia/synclink_cs.c | 7 ++--- drivers/ide/ide-cs.c | 8 +++--- drivers/isdn/hardware/avm/avm_cs.c | 9 ++++--- drivers/isdn/hisax/avma1_cs.c | 8 ++++-- drivers/isdn/hisax/elsa_cs.c | 16 ++++++-------- drivers/isdn/hisax/sedlbauer_cs.c | 16 ++++++-------- drivers/isdn/hisax/teles_cs.c | 14 +++++------- drivers/net/pcmcia/3c574_cs.c | 2 +- drivers/net/pcmcia/3c589_cs.c | 2 +- drivers/net/pcmcia/axnet_cs.c | 4 +- drivers/net/pcmcia/com20020_cs.c | 2 +- drivers/net/pcmcia/fmvj18x_cs.c | 6 ++-- drivers/net/pcmcia/ibmtr_cs.c | 2 +- drivers/net/pcmcia/nmclan_cs.c | 2 +- drivers/net/pcmcia/pcnet_cs.c | 4 +- drivers/net/pcmcia/smc91c92_cs.c | 18 ++++++++-------- drivers/net/pcmcia/xirc2ps_cs.c | 12 +++++----- drivers/net/wireless/airo_cs.c | 12 ++++------ drivers/net/wireless/atmel_cs.c | 2 +- drivers/net/wireless/hostap/hostap_cs.c | 18 +++++++-------- drivers/net/wireless/libertas/if_cs.c | 7 ++--- drivers/net/wireless/orinoco/orinoco_cs.c | 5 ++- drivers/net/wireless/orinoco/spectrum_cs.c | 5 ++- drivers/net/wireless/wl3501_cs.c | 2 +- drivers/parport/parport_cs.c | 6 +++- drivers/scsi/pcmcia/aha152x_stub.c | 2 +- drivers/scsi/pcmcia/fdomain_stub.c | 4 +- drivers/scsi/pcmcia/nsp_cs.c | 25 ++++++++++----------- drivers/scsi/pcmcia/qlogic_stub.c | 18 ++++++++-------- drivers/scsi/pcmcia/sym53c500_cs.c | 16 +++++++------- drivers/serial/serial_cs.c | 22 +++++++++--------- drivers/staging/comedi/drivers/cb_das16_cs.c | 12 ++++------ drivers/staging/comedi/drivers/das08_cs.c | 12 ++++------ drivers/staging/comedi/drivers/ni_daq_700.c | 12 ++++------ drivers/staging/comedi/drivers/ni_daq_dio24.c | 12 ++++------ drivers/staging/comedi/drivers/ni_labpc_cs.c | 12 ++++------ drivers/staging/comedi/drivers/ni_mio_cs.c | 2 +- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 12 ++++------ drivers/staging/wlags49_h2/wl_cs.c | 2 +- drivers/telephony/ixj_pcmcia.c | 3 +- drivers/usb/host/sl811_cs.c | 7 ++--- sound/pcmcia/pdaudiocf/pdaudiocf.c | 3 +- sound/pcmcia/vx/vxpocket.c | 3 +- 51 files changed, 224 insertions(+), 241 deletions(-) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 3dcb2b1..1fcd065 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -210,13 +210,13 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; if (pcmcia_request_io(pdev, &pdev->io) != 0) return -ENODEV; - stk->ctl_base = pdev->io.BasePort2; + stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { pdev->io.NumPorts1 = io->win[0].len; pdev->io.NumPorts2 = 0; if (pcmcia_request_io(pdev, &pdev->io) != 0) return -ENODEV; - stk->ctl_base = pdev->io.BasePort1 + 0x0e; + stk->ctl_base = pdev->resource[0]->start + 0x0e; } else return -ENODEV; /* If we've got this far, we're done */ @@ -270,7 +270,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) goto failed; /* No suitable config found */ } - io_base = pdev->io.BasePort1; + io_base = pdev->resource[0]->start; ctl_base = stk->ctl_base; if (!pdev->irq) goto failed; @@ -293,7 +293,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) /* FIXME: Could be more ports at base + 0x10 but we only deal with one right now */ - if (pdev->io.NumPorts1 >= 0x20) + if (resource_size(pdev->resource[0]) >= 0x20) n_ports = 2; if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index eb085de..24d2007 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -159,7 +159,7 @@ static void bluecard_detach(struct pcmcia_device *p_dev); static void bluecard_activity_led_timeout(u_long arg) { bluecard_info_t *info = (bluecard_info_t *)arg; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) return; @@ -176,7 +176,7 @@ static void bluecard_activity_led_timeout(u_long arg) static void bluecard_enable_activity_led(bluecard_info_t *info) { - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) return; @@ -232,7 +232,7 @@ static void bluecard_write_wakeup(bluecard_info_t *info) } do { - register unsigned int iobase = info->p_dev->io.BasePort1; + register unsigned int iobase = info->p_dev->resource[0]->start; register unsigned int offset; register unsigned char command; register unsigned long ready_bit; @@ -379,7 +379,7 @@ static void bluecard_receive(bluecard_info_t *info, unsigned int offset) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; if (test_bit(XMIT_SENDING_READY, &(info->tx_state))) bluecard_enable_activity_led(info); @@ -508,7 +508,7 @@ static irqreturn_t bluecard_interrupt(int irq, void *dev_inst) if (!test_bit(CARD_READY, &(info->hw_state))) return IRQ_HANDLED; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock(&(info->lock)); @@ -622,7 +622,7 @@ static int bluecard_hci_flush(struct hci_dev *hdev) static int bluecard_hci_open(struct hci_dev *hdev) { bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data); - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state))) bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE); @@ -642,7 +642,7 @@ static int bluecard_hci_open(struct hci_dev *hdev) static int bluecard_hci_close(struct hci_dev *hdev) { bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data); - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) return 0; @@ -709,7 +709,7 @@ static int bluecard_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned l static int bluecard_open(bluecard_info_t *info) { - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev; unsigned char id; @@ -828,7 +828,7 @@ static int bluecard_open(bluecard_info_t *info) static int bluecard_close(bluecard_info_t *info) { - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev = info->hdev; if (!hdev) diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 457b603..8ab494c 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -188,7 +188,7 @@ static void bt3c_write_wakeup(bt3c_info_t *info) return; do { - register unsigned int iobase = info->p_dev->io.BasePort1; + register unsigned int iobase = info->p_dev->resource[0]->start; register struct sk_buff *skb; register int len; @@ -226,7 +226,7 @@ static void bt3c_receive(bt3c_info_t *info) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; avail = bt3c_read(iobase, 0x7006); //printk("bt3c_cs: receiving %d bytes\n", avail); @@ -347,7 +347,7 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) /* our irq handler is shared */ return IRQ_NONE; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock(&(info->lock)); @@ -480,7 +480,7 @@ static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware, unsigned int iobase, size, addr, fcs, tmp; int i, err = 0; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; /* Reset */ bt3c_io_write(iobase, 0x8040, 0x0404); diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index e7e0a17..7e770d4 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -142,7 +142,7 @@ static void btuart_write_wakeup(btuart_info_t *info) } do { - register unsigned int iobase = info->p_dev->io.BasePort1; + register unsigned int iobase = info->p_dev->resource[0]->start; register struct sk_buff *skb; register int len; @@ -183,7 +183,7 @@ static void btuart_receive(btuart_info_t *info) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; do { info->hdev->stat.byte_rx++; @@ -297,7 +297,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) /* our irq handler is shared */ return IRQ_NONE; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock(&(info->lock)); @@ -354,7 +354,7 @@ static void btuart_change_speed(btuart_info_t *info, unsigned int speed) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock_irqsave(&(info->lock), flags); @@ -478,7 +478,7 @@ static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned lon static int btuart_open(btuart_info_t *info) { unsigned long flags; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev; spin_lock_init(&(info->lock)); @@ -548,7 +548,7 @@ static int btuart_open(btuart_info_t *info) static int btuart_close(btuart_info_t *info) { unsigned long flags; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev = info->hdev; if (!hdev) diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 7c94aad..bfe9313 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -149,7 +149,7 @@ static void dtl1_write_wakeup(dtl1_info_t *info) } do { - register unsigned int iobase = info->p_dev->io.BasePort1; + register unsigned int iobase = info->p_dev->resource[0]->start; register struct sk_buff *skb; register int len; @@ -214,7 +214,7 @@ static void dtl1_receive(dtl1_info_t *info) return; } - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; do { info->hdev->stat.byte_rx++; @@ -301,7 +301,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) /* our irq handler is shared */ return IRQ_NONE; - iobase = info->p_dev->io.BasePort1; + iobase = info->p_dev->resource[0]->start; spin_lock(&(info->lock)); @@ -461,7 +461,7 @@ static int dtl1_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long static int dtl1_open(dtl1_info_t *info) { unsigned long flags; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev; spin_lock_init(&(info->lock)); @@ -508,7 +508,8 @@ static int dtl1_open(dtl1_info_t *info) outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); - info->ri_latch = inb(info->p_dev->io.BasePort1 + UART_MSR) & UART_MSR_RI; + info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR) + & UART_MSR_RI; /* Turn on interrupts */ outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); @@ -533,7 +534,7 @@ static int dtl1_open(dtl1_info_t *info) static int dtl1_close(dtl1_info_t *info) { unsigned long flags; - unsigned int iobase = info->p_dev->io.BasePort1; + unsigned int iobase = info->p_dev->resource[0]->start; struct hci_dev *hdev = info->hdev; if (!hdev) diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index a8be2a7..18484ed 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -421,7 +421,7 @@ static struct card_fixup card_fixups[] = { static void set_cardparameter(struct cm4000_dev *dev) { int i; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; u_int8_t stopbits = 0x02; /* ISO default */ DEBUGP(3, dev, "-> set_cardparameter\n"); @@ -454,7 +454,7 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq) unsigned short num_bytes_read; unsigned char pts_reply[4]; ssize_t rc; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; rc = 0; @@ -663,7 +663,7 @@ static void terminate_monitor(struct cm4000_dev *dev) static void monitor_card(unsigned long p) { struct cm4000_dev *dev = (struct cm4000_dev *) p; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; unsigned short s; struct ptsreq ptsreq; int i, atrc; @@ -924,7 +924,7 @@ static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count, loff_t *ppos) { struct cm4000_dev *dev = filp->private_data; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; ssize_t rc; int i, j, k; @@ -1047,7 +1047,7 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos) { struct cm4000_dev *dev = filp->private_data; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; unsigned short s; unsigned char tmp; unsigned char infolen; @@ -1400,7 +1400,7 @@ static void stop_monitor(struct cm4000_dev *dev) static long cmm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct cm4000_dev *dev = filp->private_data; - unsigned int iobase = dev->p_dev->io.BasePort1; + unsigned int iobase = dev->p_dev->resource[0]->start; struct inode *inode = filp->f_path.dentry->d_inode; struct pcmcia_device *link; int size; diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 44adae9..a6bbf19 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -109,7 +109,7 @@ static inline unsigned char xinb(unsigned short port) static void cm4040_do_poll(unsigned long dummy) { struct reader_dev *dev = (struct reader_dev *) dummy; - unsigned int obs = xinb(dev->p_dev->io.BasePort1 + unsigned int obs = xinb(dev->p_dev->resource[0]->start + REG_OFFSET_BUFFER_STATUS); if ((obs & BSR_BULK_IN_FULL)) { @@ -140,7 +140,7 @@ static void cm4040_stop_poll(struct reader_dev *dev) static int wait_for_bulk_out_ready(struct reader_dev *dev) { int i, rc; - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; for (i = 0; i < POLL_LOOP_COUNT; i++) { if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS) @@ -170,7 +170,7 @@ static int wait_for_bulk_out_ready(struct reader_dev *dev) /* Write to Sync Control Register */ static int write_sync_reg(unsigned char val, struct reader_dev *dev) { - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; int rc; rc = wait_for_bulk_out_ready(dev); @@ -188,7 +188,7 @@ static int write_sync_reg(unsigned char val, struct reader_dev *dev) static int wait_for_bulk_in_ready(struct reader_dev *dev) { int i, rc; - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; for (i = 0; i < POLL_LOOP_COUNT; i++) { if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS) @@ -218,7 +218,7 @@ static ssize_t cm4040_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos) { struct reader_dev *dev = filp->private_data; - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; size_t bytes_to_read; unsigned long i; size_t min_bytes_to_read; @@ -320,7 +320,7 @@ static ssize_t cm4040_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos) { struct reader_dev *dev = filp->private_data; - int iobase = dev->p_dev->io.BasePort1; + int iobase = dev->p_dev->resource[0]->start; ssize_t rc; int i; unsigned int bytes_to_write; @@ -567,8 +567,8 @@ static int reader_config(struct pcmcia_device *link, int devno) dev = link->priv; - DEBUGP(2, dev, "device " DEVICE_NAME "%d at 0x%.4x-0x%.4x\n", devno, - link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1); + DEBUGP(2, dev, "device " DEVICE_NAME "%d at %pR\n", devno, + link->resource[0]); DEBUGP(2, dev, "<- reader_config (succ)\n"); return 0; diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 63c32e3..9467994 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -100,7 +100,8 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, if (ret) return ret; - io_resource = request_region(p_dev->io.BasePort1, p_dev->io.NumPorts1, + io_resource = request_region(p_dev->resource[0]->start, + resource_size(p_dev->resource[0]), IPWIRELESS_PCCARD_NAME); if (cfg->mem.nwin == 0) @@ -197,7 +198,7 @@ static int config_ipwireless(struct ipw_dev *ipw) INIT_WORK(&ipw->work_reboot, signalled_reboot_work); - ipwireless_init_hardware_v1(ipw->hardware, link->io.BasePort1, + ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start, ipw->attr_memory, ipw->common_memory, ipw->is_v2_card, signalled_reboot_callback, ipw); @@ -209,10 +210,7 @@ static int config_ipwireless(struct ipw_dev *ipw) printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n", ipw->is_v2_card ? "V2/V3" : "V1"); printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": I/O ports 0x%04x-0x%04x, irq %d\n", - (unsigned int) link->io.BasePort1, - (unsigned int) (link->io.BasePort1 + - link->io.NumPorts1 - 1), + ": I/O ports %pR, irq %d\n", link->resource[0], (unsigned int) link->irq); if (ipw->attr_memory && ipw->common_memory) printk(KERN_INFO IPWIRELESS_PCCARD_NAME diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 522992e..8ded9b0 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -609,16 +609,15 @@ static int mgslpc_config(struct pcmcia_device *link) if (ret) goto failed; - info->io_base = link->io.BasePort1; + info->io_base = link->resource[0]->start; info->irq_level = link->irq; dev_info(&link->dev, "index 0x%02x:", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); printk("\n"); return 0; diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 27dbab8..34eafaf 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -239,13 +239,13 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; if (pcmcia_request_io(pdev, &pdev->io) != 0) return -ENODEV; - stk->ctl_base = pdev->io.BasePort2; + stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { pdev->io.NumPorts1 = io->win[0].len; pdev->io.NumPorts2 = 0; if (pcmcia_request_io(pdev, &pdev->io) != 0) return -ENODEV; - stk->ctl_base = pdev->io.BasePort1 + 0x0e; + stk->ctl_base = pdev->resource[1]->start + 0x0e; } else return -ENODEV; /* If we've got this far, we're done */ @@ -279,7 +279,7 @@ static int ide_config(struct pcmcia_device *link) if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) goto failed; /* No suitable config found */ } - io_base = link->io.BasePort1; + io_base = link->resource[0]->start; ctl_base = stk->ctl_base; if (!link->irq) @@ -296,7 +296,7 @@ static int ide_config(struct pcmcia_device *link) outb(0x81, ctl_base+1); host = idecs_register(io_base, ctl_base, link->irq, link); - if (host == NULL && link->io.NumPorts1 == 0x20) { + if (host == NULL && resource_size(link->resource[0]) == 0x20) { outb(0x02, ctl_base + 0x10); host = idecs_register(io_base + 0x10, ctl_base + 0x10, link->irq, link); diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index e804a01..7c8c51f 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -191,9 +191,10 @@ static int avmcs_config(struct pcmcia_device *link) default: case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break; } - if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) { - dev_err(&link->dev, "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n", - link->io.BasePort1, link->irq); + if ((i = (*addcard)(link->resource[0]->start, link->irq)) < 0) { + dev_err(&link->dev, + "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n", + (unsigned int) link->resource[0]->start, link->irq); avmcs_release(link); return -ENODEV; } @@ -211,7 +212,7 @@ static int avmcs_config(struct pcmcia_device *link) static void avmcs_release(struct pcmcia_device *link) { - b1pcmcia_delcard(link->io.BasePort1, link->irq); + b1pcmcia_delcard(link->resource[0]->start, link->irq); pcmcia_disable_device(link); } /* avmcs_release */ diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 49e141e..8889963 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -180,16 +180,18 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) } printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n", - link->io.BasePort1, link->irq); + (unsigned int) link->resource[0]->start, link->irq); icard.para[0] = link->irq; - icard.para[1] = link->io.BasePort1; + icard.para[1] = link->resource[0]->start; icard.protocol = isdnprot; icard.typ = ISDN_CTYPE_A1_PCMCIA; i = hisax_init_pcmcia(link, &busy, &icard); if (i < 0) { - printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1); + printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 " + "PCMCIA %d at i/o %#x\n", i, + (unsigned int) link->resource[0]->start); avma1cs_release(link); return -ENODEV; } diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index 425deea..c10bfd3 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -214,23 +214,21 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); icard.para[0] = link->irq; - icard.para[1] = link->io.BasePort1; + icard.para[1] = link->resource[0]->start; icard.protocol = protocol; icard.typ = ISDN_CTYPE_ELSA_PCMCIA; i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard); if (i < 0) { - printk(KERN_ERR "elsa_cs: failed to initialize Elsa PCMCIA %d at i/o %#x\n", - i, link->io.BasePort1); + printk(KERN_ERR "elsa_cs: failed to initialize Elsa " + "PCMCIA %d with %pR\n", i, link->resource[0]); elsa_cs_release(link); } else ((local_info_t*)link->priv)->cardnr = i; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 5dbad96..cecb35a 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -296,27 +296,25 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req->Base, req->Base+req->Size-1); printk("\n"); icard.para[0] = link->irq; - icard.para[1] = link->io.BasePort1; + icard.para[1] = link->resource[0]->start; icard.protocol = protocol; icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA; ret = hisax_init_pcmcia(link, &(((local_info_t *)link->priv)->stop), &icard); if (ret < 0) { - printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n", - ret, link->io.BasePort1); + printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d with %pR\n", + ret, link->resource[0]); sedlbauer_release(link); return -ENODEV; } else diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index d3fb1b7..3787fc7 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -194,23 +194,21 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); icard.para[0] = link->irq; - icard.para[1] = link->io.BasePort1; + icard.para[1] = link->resource[0]->start; icard.protocol = protocol; icard.typ = ISDN_CTYPE_TELESPCMCIA; i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard); if (i < 0) { printk(KERN_ERR "teles_cs: failed to initialize Teles PCMCIA %d at i/o %#x\n", - i, link->io.BasePort1); + i, (unsigned int) link->resource[0]->start); teles_cs_release(link); return -ENODEV; } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index e249b89..b5ea9b8 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -356,7 +356,7 @@ static int tc574_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; ioaddr = dev->base_addr; diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index b0772df..122ef4a 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -298,7 +298,7 @@ static int tc589_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; ioaddr = dev->base_addr; EL3WINDOW(0); diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index ee0a6d0..c52fdf3 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -332,7 +332,7 @@ static int axnet_config(struct pcmcia_device *link) if (!link->irq) goto failed; - if (link->io.NumPorts2 == 8) { + if (resource_size(link->resource[1]) == 8) { link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; } @@ -342,7 +342,7 @@ static int axnet_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; if (!get_prom(link)) { printk(KERN_NOTICE "axnet_cs: this is not an AX88190 card!\n"); diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 99957af..3b53818 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -266,7 +266,7 @@ static int com20020_config(struct pcmcia_device *link) goto failed; } - ioaddr = dev->base_addr = link->io.BasePort1; + ioaddr = dev->base_addr = link->resource[0]->start; dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); dev_dbg(&link->dev, "request IRQ %d\n", diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 95a991b..bba6369 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -315,7 +315,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) if (ret == 0) { /* calculate ConfigIndex value */ link->conf.ConfigIndex = - ((link->io.BasePort1 & 0x0f0) >> 3) | 0x22; + ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; return ret; } } @@ -436,9 +436,9 @@ static int fmvj18x_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; - if (link->io.BasePort2 != 0) { + if (resource_size(link->resource[1]) != 0) { ret = fmvj18x_setup_mfc(link); if (ret != 0) goto failed; } diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index c36dcd1..e99abaa 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -231,7 +231,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) if (ret) goto failed; } - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt); if (ret) diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index c0d85af..9980cbb 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -655,7 +655,7 @@ static int nmclan_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; ioaddr = dev->base_addr; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index db6dbda..c9cd237 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -554,7 +554,7 @@ static int pcnet_config(struct pcmcia_device *link) if (!link->irq) goto failed; - if (link->io.NumPorts2 == 8) { + if (resource_size(link->resource[1]) == 8) { link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; } @@ -566,7 +566,7 @@ static int pcnet_config(struct pcmcia_device *link) if (ret) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; if (info->flags & HAS_MISC_REG) { if ((if_port == 1) || (if_port == 2)) dev->if_port = if_port; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 88f503a..1b0b323 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -457,7 +457,7 @@ static int mhz_mfc_config(struct pcmcia_device *link) if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL)) return -ENODEV; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; /* Allocate a memory window, for accessing the ISR */ req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; @@ -545,7 +545,7 @@ static void mot_config(struct pcmcia_device *link) struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); unsigned int ioaddr = dev->base_addr; - unsigned int iouart = link->io.BasePort2; + unsigned int iouart = link->resource[1]->start; /* Set UART base address and force map with COR bit 1 */ writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0); @@ -614,7 +614,7 @@ static int smc_config(struct pcmcia_device *link) link->io.NumPorts1 = 16; i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; return i; } @@ -666,7 +666,7 @@ static int osi_config(struct pcmcia_device *link) link->io.NumPorts2 = 0; i = pcmcia_request_io(link, &link->io); } - dev->base_addr = link->io.BasePort1 + 0x10; + dev->base_addr = link->resource[0]->start + 0x10; return i; } @@ -683,7 +683,7 @@ static int osi_load_firmware(struct pcmcia_device *link) /* Download the Seven of Diamonds firmware */ for (i = 0; i < fw->size; i++) { - outb(fw->data[i], link->io.BasePort1 + 2); + outb(fw->data[i], link->resource[0]->start + 2); udelay(50); } release_firmware(fw); @@ -725,12 +725,12 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) return rc; } else if (manfid == MANFID_OSITECH) { /* Make sure both functions are powered up */ - set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR); + set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR); /* Now, turn on the interrupt for both card functions */ - set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR); + set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR); dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n", - inw(link->io.BasePort1 + OSITECH_AUI_PWR), - inw(link->io.BasePort1 + OSITECH_RESET_ISR)); + inw(link->resource[0]->start + OSITECH_AUI_PWR), + inw(link->resource[0]->start + OSITECH_RESET_ISR)); } return 0; } diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index add6c82..1577b00 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -877,13 +877,13 @@ xirc2ps_config(struct pcmcia_device * link) * the base address of the ethernet port (BasePort1) is written * to the BAR registers of the modem. */ - err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, - link->io.BasePort2 & 0xff); + err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8) + link->resource[1]->start & 0xff); if (err) goto config_error; - err = pcmcia_write_config_byte(link, CISREG_IOBASE_1, - link->io.BasePort2 & 0xff); + err = pcmcia_write_config_byte(link, CISREG_IOBASE_1, (u8) + link->resource[1]->start & 0xff); if (err) goto config_error; @@ -907,7 +907,7 @@ xirc2ps_config(struct pcmcia_device * link) * part. */ writeb(0x47, local->dingo_ccr + CISREG_COR); - ioaddr = link->io.BasePort1; + ioaddr = link->resource[0]->start; writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0); writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1); @@ -954,7 +954,7 @@ xirc2ps_config(struct pcmcia_device * link) /* we can now register the device with the net subsystem */ dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; if (local->dingo) do_reset(dev, 1); /* a kludge to make the cem56 work */ diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 9389ba0..b7e7f50 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -271,7 +271,7 @@ static int airo_config(struct pcmcia_device *link) goto failed; ((local_info_t *)link->priv)->eth_dev = init_airo_card(link->irq, - link->io.BasePort1, 1, &link->dev); + link->resource[0]->start, 1, &link->dev); if (!((local_info_t *)link->priv)->eth_dev) goto failed; @@ -281,12 +281,10 @@ static int airo_config(struct pcmcia_device *link) if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req->Base, req->Base+req->Size-1); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 91ee74a..65b3aed 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -253,7 +253,7 @@ static int atmel_config(struct pcmcia_device *link) ((local_info_t*)link->priv)->eth_dev = init_atmel_card(link->irq, - link->io.BasePort1, + link->resource[0]->start, did ? did->driver_info : ATMEL_FW_TYPE_NONE, &link->dev, card_present, diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index def63bf..6db7fd1 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -227,7 +227,7 @@ static void sandisk_set_iobase(local_info_t *local) struct hostap_cs_priv *hw_priv = local->hw_priv; res = pcmcia_write_config_byte(hw_priv->link, 0x10, - hw_priv->link->io.BasePort1 & 0x00ff); + hw_priv->link->resource[0]->start & 0x00ff); if (res != 0) { printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -" " res=%d\n", res); @@ -235,7 +235,7 @@ static void sandisk_set_iobase(local_info_t *local) udelay(10); res = pcmcia_write_config_byte(hw_priv->link, 0x12, - hw_priv->link->io.BasePort1 & 0x00ff); + hw_priv->link->resource[0]->start & 0x00ff); if (res != 0) { printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -" " res=%d\n", res); @@ -265,7 +265,7 @@ static int sandisk_enable_wireless(struct net_device *dev) local_info_t *local = iface->local; struct hostap_cs_priv *hw_priv = local->hw_priv; - if (hw_priv->link->io.NumPorts1 < 0x42) { + if (resource_size(hw_priv->link->resource[0]) < 0x42) { /* Not enough ports to be SanDisk multi-function card */ ret = -ENODEV; goto done; @@ -604,7 +604,7 @@ static int prism2_config(struct pcmcia_device *link) goto failed_unlock; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; spin_unlock_irqrestore(&local->irq_init_lock, flags); @@ -616,12 +616,10 @@ static int prism2_config(struct pcmcia_device *link) link->conf.Vpp % 10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); local->shutdown = 0; diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 1d3a7e0..be4c475 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -853,7 +853,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out1; /* Initialize io access */ - card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1); + card->iobase = ioport_map(p_dev->resource[0]->start, + resource_size(p_dev->resource[0])); if (!card->iobase) { lbs_pr_err("error in ioport_map\n"); ret = -EIO; @@ -872,9 +873,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev) } /* Finally, report what we've done */ - lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n", - p_dev->irq, p_dev->io.BasePort1, - p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1); + lbs_deb_cs("irq %d, io %pR", p_dev->irq, p_dev->resource[0]); /* * Most of the libertas cards can do unaligned register access, but some diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 41ca4f1..6d514b5 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -257,7 +257,8 @@ orinoco_cs_config(struct pcmcia_device *link) /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ - mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); if (!mem) goto failed; @@ -279,7 +280,7 @@ orinoco_cs_config(struct pcmcia_device *link) } /* Register an interface with the stack */ - if (orinoco_if_add(priv, link->io.BasePort1, + if (orinoco_if_add(priv, link->resource[0]->start, link->irq, NULL) != 0) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 39399cd..4f8f55e 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -319,7 +319,8 @@ spectrum_cs_config(struct pcmcia_device *link) /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ - mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); if (!mem) goto failed; @@ -346,7 +347,7 @@ spectrum_cs_config(struct pcmcia_device *link) } /* Register an interface with the stack */ - if (orinoco_if_add(priv, link->io.BasePort1, + if (orinoco_if_add(priv, link->resource[0]->start, link->irq, NULL) != 0) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 35f431b..a32f220 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1960,7 +1960,7 @@ static int wl3501_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev)) { printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n"); diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index ee56fd6..fc1639c 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -177,12 +177,14 @@ static int parport_config(struct pcmcia_device *link) if (ret) goto failed; - p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2, + p = parport_pc_probe_port(link->resource[0]->start, + link->resource[1]->start, link->irq, PARPORT_DMA_NONE, &link->dev, IRQF_SHARED); if (p == NULL) { printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at " - "0x%3x, irq %u failed\n", link->io.BasePort1, + "0x%3x, irq %u failed\n", + (unsigned int) link->resource[0]->start, link->irq); goto failed; } diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index b07b53e..3e040f5 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -167,7 +167,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) /* Set configuration options for the aha152x driver */ memset(&s, 0, sizeof(s)); s.conf = "PCMCIA setup"; - s.io_port = link->io.BasePort1; + s.io_port = link->resource[0]->start; s.irq = link->irq; s.scsiid = host_id; s.reconnect = reconnect; diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index ee04897..49a9a0a 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -137,10 +137,10 @@ static int fdomain_config(struct pcmcia_device *link) goto failed; /* A bad hack... */ - release_region(link->io.BasePort1, link->io.NumPorts1); + release_region(link->resource[0]->start, resource_size(link->resource[0])); /* Set configuration options for the fdomain driver */ - sprintf(str, "%d,%d", link->io.BasePort1, link->irq); + sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq); fdomain_setup(str); host = __fdomain_16x0_detect(&fdomain_driver_template); diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index d414207..964c913 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1719,17 +1719,19 @@ static int nsp_cs_config(struct pcmcia_device *link) goto cs_failed; if (free_ports) { - if (link->io.BasePort1) { - release_region(link->io.BasePort1, link->io.NumPorts1); + if (link->resource[0]) { + release_region(link->resource[0]->start, + resource_size(link->resource[0]); } - if (link->io.BasePort2) { - release_region(link->io.BasePort2, link->io.NumPorts2); + if (link->resource[1]) { + release_region(link->resource[1]->start, + resource_size(link->resource[1]); } } /* Set port and IRQ */ - data->BaseAddress = link->io.BasePort1; - data->NumAddress = link->io.NumPorts1; + data->BaseAddress = link->resource[0]->start; + data->NumAddress = resurce_size(link->resource[0]); data->IrqNumber = link->irq; nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d", @@ -1764,13 +1766,10 @@ static int nsp_cs_config(struct pcmcia_device *link) if (link->conf.Attributes & CONF_ENABLE_IRQ) { printk(", irq %d", link->irq); } - if (link->io.NumPorts1) { - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - } - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base, cfg_mem->req.Base+cfg_mem->req.Size-1); diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index c1cf7f4..4e2b83f 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -215,18 +215,18 @@ static int qlogic_config(struct pcmcia_device * link) if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { /* set ATAcmd */ - outb(0xb4, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0xb4, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* The KXL-810AN has a bigger IO port window */ - if (link->io.NumPorts1 == 32) + if (resource_size(link->resource[0]) == 32) host = qlogic_detect(&qlogicfas_driver_template, link, - link->io.BasePort1 + 16, link->irq); + link->resource[0]->start + 16, link->irq); else host = qlogic_detect(&qlogicfas_driver_template, link, - link->io.BasePort1, link->irq); + link->resource[0]->start, link->irq); if (!host) { printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name); @@ -268,9 +268,9 @@ static int qlogic_resume(struct pcmcia_device *link) if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { - outb(0x80, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0x80, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* Ugggglllyyyy!!! */ qlogicfas408_bus_reset(NULL); diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index bd79e45..d99c0cb 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -733,9 +733,9 @@ SYM53C500_config(struct pcmcia_device *link) (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { /* set ATAcmd */ - outb(0xb4, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0xb4, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* @@ -748,7 +748,7 @@ SYM53C500_config(struct pcmcia_device *link) * 0x130, 0x230, 0x280, 0x290, * 0x320, 0x330, 0x340, 0x350 */ - port_base = link->io.BasePort1; + port_base = link->resource[0]->start; irq_level = link->irq; DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n", @@ -821,15 +821,15 @@ static int sym53c500_resume(struct pcmcia_device *link) if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { - outb(0x80, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0x80, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* * If things don't work after a "resume", * this is a good place to start looking. */ - SYM53C500_int_host_reset(link->io.BasePort1); + SYM53C500_int_host_reset(link->resource[0]->start); return 0; } diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 2be8b10..fe7adcd 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -463,13 +463,13 @@ static int simple_config(struct pcmcia_device *link) /* If the card is already configured, look up the port and irq */ if (link->function_config) { unsigned int port = 0; - if ((link->io.BasePort2 != 0) && - (link->io.NumPorts2 == 8)) { - port = link->io.BasePort2; + if ((link->resource[1]->end != 0) && + (resource_size(link->resource[1]) == 8)) { + port = link->resource[1]->end; info->slave = 1; } else if ((info->manfid == MANFID_OSITECH) && - (link->io.NumPorts1 == 0x40)) { - port = link->io.BasePort1 + 0x28; + (resource_size(link->resource[0]) == 0x40)) { + port = link->resource[0]->start + 0x28; info->slave = 1; } if (info->slave) { @@ -507,7 +507,7 @@ found_port: i = pcmcia_request_configuration(link, &link->conf); if (i != 0) return -1; - return setup_serial(link, info, link->io.BasePort1, link->irq); + return setup_serial(link, info, link->resource[0]->start, link->irq); } static int multi_config_check(struct pcmcia_device *p_dev, @@ -524,7 +524,7 @@ static int multi_config_check(struct pcmcia_device *p_dev, p_dev->io.BasePort1 = cf->io.win[0].base; p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; if (!pcmcia_request_io(p_dev, &p_dev->io)) { - *base2 = p_dev->io.BasePort1 + 8; + *base2 = p_dev->resource[0]->start + 8; return 0; } } @@ -544,7 +544,7 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev, p_dev->io.BasePort2 = cf->io.win[1].base; p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; if (!pcmcia_request_io(p_dev, &p_dev->io)) { - *base2 = p_dev->io.BasePort2; + *base2 = p_dev->resource[1]->start; return 0; } } @@ -596,9 +596,9 @@ static int multi_config(struct pcmcia_device *link) link->conf.ConfigIndex == 3) { err = setup_serial(link, info, base2, link->irq); - base2 = link->io.BasePort1; + base2 = link->resource[0]->start;; } else { - err = setup_serial(link, info, link->io.BasePort1, + err = setup_serial(link, info, link->resource[0]->start, link->irq); } info->c950ctrl = base2; @@ -613,7 +613,7 @@ static int multi_config(struct pcmcia_device *link) return 0; } - setup_serial(link, info, link->io.BasePort1, link->irq); + setup_serial(link, info, link->resource[0]->start, link->irq); for (i = 0; i < info->multi - 1; i++) setup_serial(link, info, base2 + (8 * i), link->irq); diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index acef29c..208f1b7 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -170,7 +170,7 @@ static int das16cs_attach(struct comedi_device *dev, if (!link) return -EIO; - dev->iobase = link->io.BasePort1; + dev->iobase = link->resource[0]->start;; printk("I/O base=0x%04lx ", dev->iobase); printk("fingerprint:\n"); @@ -787,12 +787,10 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %u", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); + if (link->resource[1]) + printk(", io %pR", link->resource[1]); printk("\n"); return; diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 3eddb7c..c4cfcff 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -88,7 +88,7 @@ static int das08_cs_attach(struct comedi_device *dev, printk(" no pcmcia cards found\n"); return -EIO; } - iobase = link->io.BasePort1; + iobase = link->resource[0]->start; } else { printk(" bug! board does not have PCMCIA bustype\n"); return -EINVAL; @@ -283,12 +283,10 @@ static void das08_pcmcia_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %u", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); return; diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index f3c4d2f..6d56957 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -376,7 +376,7 @@ static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it) link = pcmcia_cur_dev; /* XXX hack */ if (!link) return -EIO; - iobase = link->io.BasePort1; + iobase = link->resource[0]->start; #ifdef incomplete irq = link->irq; #endif @@ -644,12 +644,10 @@ static void dio700_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(", io %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req.Base, req.Base + req.Size - 1); diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index f0c4367..29e1daf 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -128,7 +128,7 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it) link = pcmcia_cur_dev; /* XXX hack */ if (!link) return -EIO; - iobase = link->io.BasePort1; + iobase = link->resource[0]->start; #ifdef incomplete irq = link->irq; #endif @@ -396,12 +396,10 @@ static void dio24_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req.Base, req.Base + req.Size - 1); diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 1ee78f8..fb10987 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -142,7 +142,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) link = pcmcia_cur_dev; /* XXX hack */ if (!link) return -EIO; - iobase = link->io.BasePort1; + iobase = link->resource[0]->start; irq = link->irq; break; default: @@ -373,12 +373,10 @@ static void labpc_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); if (link->win) printk(", mem 0x%06lx-0x%06lx", req.Base, req.Base + req.Size - 1); diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index 0bce220..f37dc22 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -355,7 +355,7 @@ static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it) return -EIO; dev->driver = &driver_ni_mio_cs; - dev->iobase = link->io.BasePort1; + dev->iobase = link->resource[0]->start; irq = link->irq; diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index 67c0fa6..80b8d57 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -871,7 +871,7 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it) } } - dev->iobase = local->link->io.BasePort1; + dev->iobase = local->link->resource[0]->start; ret = alloc_subdevices(dev, 4); if (ret < 0) @@ -1153,12 +1153,10 @@ static void daqp_cs_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %u", link->irq); - if (link->io.NumPorts1) - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2 + link->io.NumPorts2 - 1); + if (link->resource[0]) + printk(" & %pR", link->resource[0]); + if (link->resource[1]) + printk(" & %pR", link->resource[1]); printk("\n"); return; diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index afe4575..2361537 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -319,7 +319,7 @@ void wl_adapter_insert( struct pcmcia_device *link ) goto failed; dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev) != 0) { diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index f6c7e6f..a801036 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -150,7 +150,8 @@ static int ixj_config(struct pcmcia_device * link) /* * Register the card with the core. */ - j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10); + j = ixj_pcmcia_probe(link->resource[0]->start, + link->resource[0]->start + 0x10); info->ndev = 1; ixj_get_serial(link, j); diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index acb7e25..22e04f2 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -189,7 +189,7 @@ static int sl811_cs_config(struct pcmcia_device *link) goto failed; /* require an IRQ and two registers */ - if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) + if (resource_size(link->resource[0]) < 2) goto failed; if (!link->irq) @@ -204,11 +204,10 @@ static int sl811_cs_config(struct pcmcia_device *link) if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); printk(", irq %d", link->irq); - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); + printk(", io %pR", link->resource[0]); printk("\n"); - if (sl811_hc_init(parent, link->io.BasePort1, link->irq) + if (sl811_hc_init(parent, link->resource[0]->start, link->irq) < 0) { failed: printk(KERN_WARNING "sl811_cs_config failed\n"); diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index df110df..9f897bc 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -231,7 +231,8 @@ static int pdacf_config(struct pcmcia_device *link) if (ret) goto failed; - if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq) < 0) + if (snd_pdacf_assign_resources(pdacf, link->resource[0]->start, + link->irq) < 0) goto failed; return 0; diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 624b47a..f23c235 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -241,7 +241,8 @@ static int vxpocket_config(struct pcmcia_device *link) chip->dev = &link->dev; snd_card_set_dev(chip->card, chip->dev); - if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq) < 0) + if (snd_vxpocket_assign_resources(chip, link->resource[0]->start, + link->irq) < 0) goto failed; return 0; -- 1.7.0.4

2 1

[alsa-devel] [PATCH 05/11] pcmcia: do not use io_req_t when calling pcmcia_request_io()
by Dominik Brodowski 01 Aug '10

01 Aug '10

Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev(a)vger.kernel.org CC: linux-wireless(a)vger.kernel.org CC: linux-ide(a)vger.kernel.org CC: linux-usb(a)vger.kernel.org CC: laforge(a)gnumonks.org CC: linux-mtd(a)lists.infradead.org CC: linux-bluetooth(a)vger.kernel.org CC: alsa-devel(a)alsa-project.org CC: linux-serial(a)vger.kernel.org CC: Michael Buesch <mb(a)bu3sch.de> Signed-off-by: Dominik Brodowski <linux(a)dominikbrodowski.net> --- Documentation/pcmcia/driver-changes.txt | 7 ++++ drivers/ata/pata_pcmcia.c | 29 ++++++++------- drivers/bluetooth/bluecard_cs.c | 13 +++---- drivers/bluetooth/bt3c_cs.c | 18 +++++----- drivers/bluetooth/btuart_cs.c | 18 +++++----- drivers/bluetooth/dtl1_cs.c | 21 +++++------ drivers/char/pcmcia/cm4000_cs.c | 17 +++------ drivers/char/pcmcia/cm4040_cs.c | 20 +++------- drivers/char/pcmcia/ipwireless/main.c | 10 +++--- drivers/char/pcmcia/synclink_cs.c | 21 +++++------ drivers/ide/ide-cs.c | 30 ++++++++------- drivers/isdn/hardware/avm/avm_cs.c | 15 +++----- drivers/isdn/hisax/avma1_cs.c | 20 ++++------ drivers/isdn/hisax/elsa_cs.c | 15 ++++---- drivers/isdn/hisax/sedlbauer_cs.c | 28 +++++++-------- drivers/isdn/hisax/teles_cs.c | 15 ++++---- drivers/net/pcmcia/3c574_cs.c | 11 +++--- drivers/net/pcmcia/3c589_cs.c | 11 +++--- drivers/net/pcmcia/axnet_cs.c | 40 +++++++++++---------- drivers/net/pcmcia/com20020_cs.c | 19 ++++++---- drivers/net/pcmcia/fmvj18x_cs.c | 31 ++++++++-------- drivers/net/pcmcia/ibmtr_cs.c | 14 ++++---- drivers/net/pcmcia/nmclan_cs.c | 8 ++-- drivers/net/pcmcia/pcnet_cs.c | 40 +++++++++++---------- drivers/net/pcmcia/smc91c92_cs.c | 43 +++++++++++----------- drivers/net/pcmcia/xirc2ps_cs.c | 34 +++++++++--------- drivers/net/wireless/airo_cs.c | 22 +++++------ drivers/net/wireless/atmel_cs.c | 22 +++++------ drivers/net/wireless/b43/pcmcia.c | 4 -- drivers/net/wireless/hostap/hostap_cs.c | 28 ++++++--------- drivers/net/wireless/libertas/if_cs.c | 8 ++-- drivers/net/wireless/orinoco/orinoco_cs.c | 24 ++++++------- drivers/net/wireless/orinoco/spectrum_cs.c | 24 ++++++------- drivers/net/wireless/ray_cs.c | 5 +-- drivers/net/wireless/wl3501_cs.c | 12 +++--- drivers/parport/parport_cs.c | 16 ++++---- drivers/pcmcia/pcmcia_resource.c | 37 +++++-------------- drivers/scsi/pcmcia/aha152x_stub.c | 14 ++++---- drivers/scsi/pcmcia/fdomain_stub.c | 10 +++--- drivers/scsi/pcmcia/nsp_cs.c | 30 +++++++-------- drivers/scsi/pcmcia/qlogic_stub.c | 14 ++++---- drivers/scsi/pcmcia/sym53c500_cs.c | 14 ++++---- drivers/serial/serial_cs.c | 37 ++++++++++--------- drivers/staging/comedi/drivers/cb_das16_cs.c | 24 ++++++------- drivers/staging/comedi/drivers/das08_cs.c | 23 ++++++------ drivers/staging/comedi/drivers/ni_daq_700.c | 24 ++++++------- drivers/staging/comedi/drivers/ni_daq_dio24.c | 24 ++++++------- drivers/staging/comedi/drivers/ni_labpc_cs.c | 24 ++++++------- drivers/staging/comedi/drivers/ni_mio_cs.c | 13 +++---- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 24 ++++++------- drivers/staging/wlags49_h2/wl_cs.c | 8 ++-- drivers/telephony/ixj_pcmcia.c | 16 ++++---- drivers/usb/host/sl811_cs.c | 12 +++--- include/pcmcia/cs.h | 17 --------- include/pcmcia/ds.h | 21 ++++++++++- sound/pcmcia/pdaudiocf/pdaudiocf.c | 6 ++-- sound/pcmcia/vx/vxpocket.c | 6 ++-- 57 files changed, 527 insertions(+), 584 deletions(-) diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index ff5f0be..26c0f9c 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,4 +1,11 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* pcmcia_request_io changes (as of 2.6.36) + Instead of io_req_t, drivers are now requested to fill out + struct pcmcia_device *p_dev->resource[0,1] for up to two ioport + ranges. After a call to pcmcia_request_io(), the ports found there + are reserved, after calling pcmcia_request_configuration(), they may + be used. + * No dev_info_t, no cs_types.h (as of 2.6.36) dev_info_t and a few other typedefs are removed. No longer use them in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 1fcd065..e944aa0 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -200,21 +200,23 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + pdev->resource[0]->start = io->win[0].base; + if (!(io->flags & CISTPL_IO_16BIT)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + } if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = 8; + pdev->resource[1]->start = io->win[1].base; + pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = io->win[0].len; + pdev->resource[1]->end = 0; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[0]->start + 0x0e; } else @@ -245,9 +247,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) struct ata_port_operations *ops = &pcmcia_port_ops; /* Set up attributes in order to probe card and get resources */ - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - pdev->io.IOAddrLines = 3; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; pdev->conf.Attributes = CONF_ENABLE_IRQ; pdev->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 24d2007..d52e90a 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -865,9 +865,6 @@ static int bluecard_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; - link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -890,12 +887,14 @@ static int bluecard_config(struct pcmcia_device *link) int i, n; link->conf.ConfigIndex = 0x20; - link->io.NumPorts1 = 64; - link->io.IOAddrLines = 6; + + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 64; + link->io_lines = 6; for (n = 0; n < 0x400; n += 0x40) { - link->io.BasePort1 = n ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = n ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 8ab494c..7ab8f29 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -657,8 +657,8 @@ static int bt3c_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -683,14 +683,14 @@ static int bt3c_check_config(struct pcmcia_device *p_dev, { unsigned long try = (unsigned long) priv_data; + p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = (try == 0) ? 16 : - cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -707,9 +707,9 @@ static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { for (j = 0; j < 5; j++) { - p_dev->io.BasePort1 = base[j]; - p_dev->io.IOAddrLines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 7e770d4..1c4f5e8 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -586,8 +586,8 @@ static int btuart_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -612,14 +612,14 @@ static int btuart_check_config(struct pcmcia_device *p_dev, { int *try = priv_data; + p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = (*try == 0) ? 16 : - cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -636,9 +636,9 @@ static int btuart_check_config_notpicky(struct pcmcia_device *p_dev, if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { for (j = 0; j < 5; j++) { - p_dev->io.BasePort1 = base[j]; - p_dev->io.IOAddrLines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index bfe9313..18ecc57 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -572,8 +572,8 @@ static int dtl1_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -597,14 +597,13 @@ static int dtl1_confcheck(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */ - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) - return 0; - } - return -ENODEV; + if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8)) + return -ENODEV; + + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[0]->end = cf->io.win[0].len; /*yo */ + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + return pcmcia_request_io(p_dev); } static int dtl1_config(struct pcmcia_device *link) @@ -613,7 +612,7 @@ static int dtl1_config(struct pcmcia_device *link) int i; /* Look for a generic full-sized window */ - link->io.NumPorts1 = 8; + link->resource[0]->end = 8; if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0) goto failed; diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 18484ed..ec73d9f 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1751,17 +1751,12 @@ static int cm4000_config_check(struct pcmcia_device *p_dev, if (!cfg->io.nwin) return -ENODEV; - /* Get the IOaddr */ - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(cfg->io.flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(cfg->io.flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + return pcmcia_request_io(p_dev); } static int cm4000_config(struct pcmcia_device * link, int devno) diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index a6bbf19..815cde1 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -527,16 +527,12 @@ static int cm4040_config_check(struct pcmcia_device *p_dev, return -ENODEV; /* Get the IOaddr */ - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(cfg->io.flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(cfg->io.flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - - rc = pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + rc = pcmcia_request_io(p_dev); + dev_printk(KERN_INFO, &p_dev->dev, "pcmcia_request_io returned 0x%x\n", rc); return rc; @@ -548,10 +544,6 @@ static int reader_config(struct pcmcia_device *link, int devno) struct reader_dev *dev; int fail_rc; - link->io.BasePort2 = 0; - link->io.NumPorts2 = 0; - link->io.Attributes2 = 0; - if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 9467994..5f87b9f 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -88,15 +88,15 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, memreq_t memreq_common_memory; int ret; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.IOAddrLines = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; /* 0x40 causes it to generate level mode interrupts. */ /* 0x04 enables IREQ pin. */ p_dev->conf.ConfigIndex = cfg->index | 0x44; - ret = pcmcia_request_io(p_dev, &p_dev->io); + p_dev->io_lines = 16; + ret = pcmcia_request_io(p_dev); if (ret) return ret; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 8ded9b0..9ecd6be 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -571,18 +571,15 @@ static int mgslpc_ioprobe(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - if (cfg->io.nwin > 0) { - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(cfg->io.flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(cfg->io.flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - return pcmcia_request_io(p_dev, &p_dev->io); - } - return -ENODEV; + if (!cfg->io.nwin) + return -ENODEV; + + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + return pcmcia_request_io(p_dev); } static int mgslpc_config(struct pcmcia_device *link) diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 34eafaf..c1a16f3 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -97,9 +97,8 @@ static int ide_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = 3; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -228,22 +227,25 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + pdev->conf.ConfigIndex = cfg->index; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + pdev->resource[0]->start = io->win[0].base; + if (!(io->flags & CISTPL_IO_16BIT)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + } if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = 8; + pdev->resource[1]->start = io->win[1].base; + pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[1]->start; } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) + pdev->resource[0]->end = io->win[0].len; + pdev->resource[1]->end = 0; + if (pcmcia_request_io(pdev) != 0) return -ENODEV; stk->ctl_base = pdev->resource[1]->start + 0x0e; } else diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 7c8c51f..09b1795 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -75,9 +75,8 @@ static int avmcs_probe(struct pcmcia_device *p_dev) { /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -119,13 +118,9 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev, if (cf->io.nwin <= 0) return -ENODEV; - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.NumPorts1 = cf->io.win[0].len; - p_dev->io.NumPorts2 = 0; - printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n", - p_dev->io.BasePort1, - p_dev->io.BasePort1+p_dev->io.NumPorts1-1); - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[0]->end = cf->io.win[0].len; + return pcmcia_request_io(p_dev); } static int avmcs_config(struct pcmcia_device *link) diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 8889963..94263c2 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -78,11 +78,10 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "avma1cs_attach()\n"); /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts2 = 16; - p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->end = 16; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -126,13 +125,10 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev, if (cf->io.nwin <= 0) return -ENODEV; - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.NumPorts1 = cf->io.win[0].len; - p_dev->io.NumPorts2 = 0; - printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n", - p_dev->io.BasePort1, - p_dev->io.BasePort1+p_dev->io.NumPorts1-1); - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[0]->end = cf->io.win[0].len; + p_dev->io_lines = 5; + return pcmcia_request_io(p_dev); } diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index c10bfd3..b3c08aa 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -126,9 +126,8 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) and attributes of IO windows) are fixed by the nature of the device, and can be hard-wired here. */ - link->io.NumPorts1 = 8; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 3; + link->resource[0]->end = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -173,16 +172,18 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev, { int j; + p_dev->io_lines = 3; + if ((cf->io.nwin > 0) && cf->io.win[0].base) { printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n"); - p_dev->io.BasePort1 = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } else { printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n"); for (j = 0x2f0; j > 0x100; j -= 0x10) { - p_dev->io.BasePort1 = j; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = j; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index cecb35a..4755eb4 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -129,9 +129,8 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) /* from old sedl_cs */ /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 8; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = 3; + link->resource[0]->end = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = 0; link->conf.IntType = INT_MEMORY_AND_IO; @@ -201,23 +200,22 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + p_dev->io_lines = 3; + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 3787fc7..7296102 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -106,9 +106,8 @@ static int __devinit teles_probe(struct pcmcia_device *link) and attributes of IO windows) are fixed by the nature of the device, and can be hard-wired here. */ - link->io.NumPorts1 = 96; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 96; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -153,16 +152,18 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev, { int j; + p_dev->io_lines = 5; + if ((cf->io.nwin > 0) && cf->io.win[0].base) { printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); - p_dev->io.BasePort1 = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } else { printk(KERN_INFO "(teles_cs: looks like the 97 model)\n"); for (j = 0x2f0; j > 0x100; j -= 0x10) { - p_dev->io.BasePort1 = j; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = j; + if (!pcmcia_request_io(p_dev)) return 0; } } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index b5ea9b8..c683f77 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -278,8 +278,8 @@ static int tc574_probe(struct pcmcia_device *link) lp->p_dev = link; spin_lock_init(&lp->window_lock); - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -337,10 +337,11 @@ static int tc574_config(struct pcmcia_device *link) dev_dbg(&link->dev, "3c574_config()\n"); - link->io.IOAddrLines = 16; + link->io_lines = 16; + for (i = j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 122ef4a..61f9cf2 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -213,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link) lp->p_dev = link; spin_lock_init(&lp->lock); - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -277,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link) "3Com card??\n"); multi = (link->card_id == PRODID_3COM_3C562); + link->io_lines = 16; + /* For the 3c562, the base address must be xx00-xx7f */ - link->io.IOAddrLines = 16; for (i = j = 0; j < 0x400; j += 0x10) { if (multi && (j & 0x80)) continue; - link->io.BasePort1 = j ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index c52fdf3..5f05ffb 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -259,28 +259,30 @@ static int get_prom(struct pcmcia_device *link) static int try_io_port(struct pcmcia_device *link) { int j, ret; - if (link->io.NumPorts1 == 32) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + if (link->resource[0]->end == 32) { + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* for master/slave multifunction cards */ - if (link->io.NumPorts2 > 0) - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + if (link->resource[1]->end > 0) + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } else { /* This should be two 16-port windows */ - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } - if (link->io.BasePort1 == 0) { - link->io.IOAddrLines = 16; + if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - link->io.BasePort2 = (j ^ 0x300) + 0x10; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + link->resource[1]->start = (j ^ 0x300) + 0x10; + link->io_lines = 16; + ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { - return pcmcia_request_io(link, &link->io); + return pcmcia_request_io(link); } } @@ -301,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev, network function with window 0, and serial with window 1 */ if (io->nwin > 1) { i = (io->win[1].len > io->win[0].len); - p_dev->io.BasePort2 = io->win[1-i].base; - p_dev->io.NumPorts2 = io->win[1-i].len; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; } else { - i = p_dev->io.NumPorts2 = 0; + i = p_dev->resource[1]->end = 0; } - p_dev->io.BasePort1 = io->win[i].base; - p_dev->io.NumPorts1 = io->win[i].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); return -ENODEV; diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 3b53818..3c400cf 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -158,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev) /* fill in our module parameters as defaults */ dev->dev_addr[0] = node; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts1 = 16; - p_dev->io.IOAddrLines = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -245,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link) dev_dbg(&link->dev, "com20020_config\n"); - dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1); + dev_dbg(&link->dev, "baseport1 is %Xh\n", + (unsigned int) link->resource[0]->start); + i = -ENODEV; - if (!link->io.BasePort1) + link->io_lines = 16; + + if (!link->resource[0]->start) { for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) { - link->io.BasePort1 = ioaddr; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = ioaddr; + i = pcmcia_request_io(link); if (i == 0) break; } } else - i = pcmcia_request_io(link, &link->io); + i = pcmcia_request_io(link); if (i != 0) { diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index bba6369..6993044 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -248,9 +248,8 @@ static int fmvj18x_probe(struct pcmcia_device *link) lp->base = NULL; /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; @@ -288,13 +287,13 @@ static int mfc_try_io_port(struct pcmcia_device *link) { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; for (i = 0; i < 5; i++) { - link->io.BasePort2 = serial_base[i]; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - if (link->io.BasePort2 == 0) { - link->io.NumPorts2 = 0; + link->resource[1]->start = serial_base[i]; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + if (link->resource[1]->start == 0) { + link->resource[1]->end = 0; printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n"); } - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret == 0) return ret; } @@ -310,8 +309,8 @@ static int ungermann_try_io_port(struct pcmcia_device *link) 0x380,0x3c0 only for ioport. */ for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) { - link->io.BasePort1 = ioaddr; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = ioaddr; + ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ link->conf.ConfigIndex = @@ -345,6 +344,8 @@ static int fmvj18x_config(struct pcmcia_device *link) dev_dbg(&link->dev, "fmvj18x_config\n"); + link->io_lines = 5; + len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); kfree(buf); @@ -363,20 +364,20 @@ static int fmvj18x_config(struct pcmcia_device *link) /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; @@ -417,14 +418,14 @@ static int fmvj18x_config(struct pcmcia_device *link) } } - if (link->io.NumPorts2 != 0) { + if (link->resource[1]->end != 0) { ret = mfc_try_io_port(link); if (ret != 0) goto failed; } else if (cardtype == UNGERMANN) { ret = ungermann_try_io_port(link); if (ret != 0) goto failed; } else { - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; } diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index e99abaa..3fd8595 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -151,9 +151,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->priv = info; info->ti = netdev_priv(dev); - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 4; - link->io.IOAddrLines = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 4; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -218,16 +217,17 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_config\n"); link->conf.ConfigIndex = 0x61; + link->io_lines = 16; /* Determine if this is PRIMARY or ALTERNATE. */ /* Try PRIMARY card at 0xA20-0xA23 */ - link->io.BasePort1 = 0xA20; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = 0xA20; + i = pcmcia_request_io(link); if (i != 0) { /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */ - link->io.BasePort1 = 0xA24; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = 0xA24; + ret = pcmcia_request_io(link); if (ret) goto failed; } diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 9980cbb..68f2dee 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -458,9 +458,8 @@ static int nmclan_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&lp->bank_lock); - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -644,7 +643,8 @@ static int nmclan_config(struct pcmcia_device *link) dev_dbg(&link->dev, "nmclan_config\n"); - ret = pcmcia_request_io(link, &link->io); + link->io_lines = 5; + ret = pcmcia_request_io(link); if (ret) goto failed; ret = pcmcia_request_exclusive_irq(link, mace_interrupt); diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index c9cd237..9c5fc9d 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -477,29 +477,31 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) static int try_io_port(struct pcmcia_device *link) { int j, ret; - if (link->io.NumPorts1 == 32) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (link->io.NumPorts2 > 0) { + link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + if (link->resource[0]->end == 32) { + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + if (link->resource[1]->end > 0) { /* for master/slave multifunction cards */ - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } } else { /* This should be two 16-port windows */ - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } - if (link->io.BasePort1 == 0) { - link->io.IOAddrLines = 16; + if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - link->io.BasePort2 = (j ^ 0x300) + 0x10; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + link->resource[1]->start = (j ^ 0x300) + 0x10; + link->io_lines = 16; + ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { - return pcmcia_request_io(link, &link->io); + return pcmcia_request_io(link); } } @@ -520,18 +522,18 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev, network function with window 0, and serial with window 1 */ if (io->nwin > 1) { i = (io->win[1].len > io->win[0].len); - p_dev->io.BasePort2 = io->win[1-i].base; - p_dev->io.NumPorts2 = io->win[1-i].len; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; } else { - i = p_dev->io.NumPorts2 = 0; + i = p_dev->resource[1]->end = 0; } *has_shmem = ((cfg->mem.nwin == 1) && (cfg->mem.win[0].len >= 0x4000)); - p_dev->io.BasePort1 = io->win[i].base; - p_dev->io.NumPorts1 = io->win[i].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); return 0; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 1b0b323..a5e4779 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -324,9 +324,8 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 4; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -427,12 +426,13 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->io.BasePort2 = cf->io.win[0].base; + p_dev->resource[1]->start = cf->io.win[0].base; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; - p_dev->io.BasePort1 = k ^ 0x300; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = k ^ 0x300; + p_dev->io_lines = 16; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -448,9 +448,8 @@ static int mhz_mfc_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->io.IOAddrLines = 16; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts2 = 8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -601,9 +600,9 @@ static int smc_configcheck(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + return pcmcia_request_io(p_dev); } static int smc_config(struct pcmcia_device *link) @@ -611,7 +610,7 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->io.NumPorts1 = 16; + link->resource[0]->end = 16; i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -646,25 +645,25 @@ static int osi_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->io.NumPorts1 = 64; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts2 = 8; - link->io.IOAddrLines = 16; + link->resource[0]->end = 64; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ link->conf.ConfigIndex = 0x23; + link->io_lines = 16; for (i = j = 0; j < 4; j++) { - link->io.BasePort2 = com[j]; - i = pcmcia_request_io(link, &link->io); + link->resource[1]->start = com[j]; + i = pcmcia_request_io(link); if (i == 0) break; } if (i != 0) { /* Fallback: turn off hard decode */ link->conf.ConfigIndex = 0x03; - link->io.NumPorts2 = 0; - i = pcmcia_request_io(link, &link->io); + link->resource[1]->end = 0; + i = pcmcia_request_io(link); } dev->base_addr = link->resource[0]->start + 0x10; return i; @@ -803,7 +802,7 @@ static int check_sig(struct pcmcia_device *link) } /* Try setting bus width */ - width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO); + width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO); s = inb(ioaddr + CONFIG); if (width) s |= CFG_16BIT; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 1577b00..e051d3a 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -677,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev, if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = ioaddr; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) return 0; } } @@ -696,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev, int *pass = priv_data; if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = p_dev->io.BasePort2 + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = p_dev->resource[1]->start + (*pass ? (cf->index & 0x20 ? -24:8) : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev, &p_dev->io)) + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -807,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->io.IOAddrLines =10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; if (local->modem) { int pass; @@ -816,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status |= CCSR_AUDIO_ENA; } - link->io.NumPorts2 = 8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->io.NumPorts1 = 16; /* no Mako stuff anymore */ + link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->io.NumPorts1 = 18; + link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for @@ -840,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { - link->io.NumPorts1 = 16; + link->io_lines = 10; + link->resource[0]->end = 16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - link->io.BasePort1 = ioaddr; - if (!(err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = ioaddr; + if (!(err = pcmcia_request_io(link))) goto port_found; } - link->io.BasePort1 = 0; /* let CS decide */ - if ((err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = 0; /* let CS decide */ + if ((err = pcmcia_request_io(link))) goto config_error; } port_found: diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index b7e7f50..d241b4a 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -175,25 +175,23 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; /* diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 65b3aed..3b63216 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -190,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int atmel_config(struct pcmcia_device *link) diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index f71bc78..7c9af82 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -77,10 +77,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) dev->conf.Attributes = CONF_ENABLE_IRQ; dev->conf.IntType = INT_MEMORY_AND_IO; - dev->io.BasePort2 = 0; - dev->io.NumPorts2 = 0; - dev->io.Attributes2 = 0; - win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 6db7fd1..04edfa9 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -519,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev, PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " "dflt->io.nwin=%d\n", cfg->io.nwin, dflt->io.nwin); - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, " - "io.base=0x%04x, len=%d\n", io->flags, - io->win[0].base, io->win[0].len); - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & - CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int prism2_config(struct pcmcia_device *link) diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index be4c475..9c29839 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -801,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; /* Do we need to allocate an interrupt? */ p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -815,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int if_cs_probe(struct pcmcia_device *p_dev) diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 6d514b5..ef46a2d 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -191,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } return 0; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 4f8f55e..873877e 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -253,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } return 0; diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 165beb6..b83d5ef 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -315,9 +315,8 @@ static int ray_probe(struct pcmcia_device *p_dev) local->finder = p_dev; /* The io structure describes IO port mapping. None used here */ - p_dev->io.NumPorts1 = 0; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 0; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a32f220..a1cc2d4 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1884,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev) struct wl3501_card *this; /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -1932,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link) /* Try allocating IO ports. This tries a few fixed addresses. If you * want, you can also read the card's config table to pick addresses -- * see the serial driver for an example. */ + link->io_lines = 5; for (j = 0x280; j < 0x400; j += 0x20) { /* The '^0x300' is so that we probe 0x300-0x3ff first, then * 0x200-0x2ff, and so on, because this seems safer */ - link->io.BasePort1 = j; - link->io.BasePort2 = link->io.BasePort1 + 0x10; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j; + link->resource[1]->start = link->resource[0]->start + 0x10; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index fc1639c..23e50f4 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -101,8 +101,8 @@ static int parport_probe(struct pcmcia_device *link) link->priv = info; info->p_dev = link; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -143,16 +143,16 @@ static int parport_config_check(struct pcmcia_device *p_dev, { if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; if (epp_mode) p_dev->conf.ConfigIndex |= FORCE_EPP_MODE; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin == 2) { - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; return 0; } diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index fcd48da..a48d4a9 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -70,7 +70,8 @@ static int alloc_io_space(struct pcmcia_socket *s, struct resource *res, res->flags |= IORESOURCE_IO; - dev_dbg(&s->dev, "alloc_io_space request for %pR\n", res); + dev_dbg(&s->dev, "alloc_io_space request for %pR, %d lines\n", + res, lines); align = base ? (lines ? 1<<lines : 0) : 1; if (align && (align < num)) { @@ -541,38 +542,25 @@ EXPORT_SYMBOL(pcmcia_request_configuration); * pcmcia_request_io() - attempt to reserve port ranges for PCMCIA devices * * pcmcia_request_io() attepts to reserve the IO port ranges specified in - * struct pcmcia_device *p_dev->resource[0] and *p_dev->resource[1]. The + * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The * "start" value is the requested start of the IO port resource; "end" - * relfects the number of ports requested. - * - * If io_req_t is passed, those values are converted automatically. + * reflects the number of ports requested. The number of IO lines requested + * is specified in &struct pcmcia_device @p_dev->io_lines. */ -int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) +int pcmcia_request_io(struct pcmcia_device *p_dev) { struct pcmcia_socket *s = p_dev->socket; - config_t *c; + config_t *c = p_dev->function_config; int ret = -EINVAL; - unsigned int lines = req->IOAddrLines; mutex_lock(&s->ops_mutex); + dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]); if (!(s->state & SOCKET_PRESENT)) { dev_dbg(&s->dev, "pcmcia_request_io: No card present\n"); goto out; } - c = p_dev->function_config; - if (req) { - c->io[0].start = req->BasePort1; - c->io[0].end = req->NumPorts1; - c->io[0].flags |= req->Attributes1; - c->io[1].start = req->BasePort2; - c->io[1].end = req->NumPorts2; - c->io[1].flags |= req->Attributes2; - } - - dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]); - if (c->state & CONFIG_LOCKED) { dev_dbg(&s->dev, "Configuration is locked\n"); goto out; @@ -582,12 +570,12 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) goto out; } - ret = alloc_io_space(s, &c->io[0], lines); + ret = alloc_io_space(s, &c->io[0], p_dev->io_lines); if (ret) goto out; if (c->io[1].end) { - ret = alloc_io_space(s, &c->io[1], lines); + ret = alloc_io_space(s, &c->io[1], p_dev->io_lines); if (ret) { release_io_space(s, &c->io[0]); goto out; @@ -598,11 +586,6 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) c->state |= CONFIG_IO_REQ; p_dev->_io = 1; - if (!ret) { - req->BasePort1 = c->io[0].start; - req->BasePort2 = c->io[1].start; - } - dev_dbg(&s->dev, "pcmcia_request_io succeeded: %pR , %pR", &c->io[0], &c->io[1]); out: diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 3e040f5..61f49bd 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -100,9 +100,8 @@ static int aha152x_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x20; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 0x20; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -130,15 +129,16 @@ static int aha152x_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { + p_dev->io_lines = 10; /* For New Media T&J, look for a SCSI window */ if (cfg->io.win[0].len >= 0x20) - p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->resource[0]->start = cfg->io.win[0].base; else if ((cfg->io.nwin > 1) && (cfg->io.win[1].len >= 0x20)) - p_dev->io.BasePort1 = cfg->io.win[1].base; + p_dev->resource[0]->start = cfg->io.win[1].base; if ((cfg->io.nwin > 0) && - (p_dev->io.BasePort1 < 0xffff)) { - if (!pcmcia_request_io(p_dev, &p_dev->io)) + (p_dev->resource[0]->start < 0xffff)) { + if (!pcmcia_request_io(p_dev)) return 0; } return -EINVAL; diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 49a9a0a..13dbe5c 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -83,9 +83,8 @@ static int fdomain_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 0x10; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -112,8 +111,9 @@ static int fdomain_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + return pcmcia_request_io(p_dev); } diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 964c913..ad8e896 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1558,9 +1558,8 @@ static int nsp_cs_probe(struct pcmcia_device *link) nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; /* not used */ + link->resource[0]->end = 0x10; + link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; @@ -1641,24 +1640,23 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = + p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 4e2b83f..eb775f1 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -156,9 +156,8 @@ static int qlogic_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -185,13 +184,14 @@ static int qlogic_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int qlogic_config(struct pcmcia_device * link) diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index d99c0cb..321e390 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -690,13 +690,14 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int @@ -858,9 +859,8 @@ SYM53C500_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index fe7adcd..141c695 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -335,8 +335,8 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; if (do_sound) { link->conf.Attributes |= CONF_ENABLE_SPKR; @@ -424,12 +424,13 @@ static int simple_config_check(struct pcmcia_device *p_dev, p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->io_lines = ((*try & 0x1) == 0) ? + 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) && (cf->io.win[0].base != 0)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev)) return 0; } return -EINVAL; @@ -446,9 +447,9 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev, if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { for (j = 0; j < 5; j++) { - p_dev->io.BasePort1 = base[j]; - p_dev->io.IOAddrLines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) return 0; } } @@ -521,9 +522,9 @@ static int multi_config_check(struct pcmcia_device *p_dev, /* The quad port cards have bad CIS's, so just look for a window larger than 8 ports and assume it will be right */ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) { + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev)) { *base2 = p_dev->resource[0]->start + 8; return 0; } @@ -540,10 +541,10 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev, int *base2 = priv_data; if (cf->io.nwin == 2) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.BasePort2 = cf->io.win[1].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev, &p_dev->io)) { + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->resource[1]->start = cf->io.win[1].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev)) { *base2 = p_dev->resource[1]->start; return 0; } @@ -557,10 +558,10 @@ static int multi_config(struct pcmcia_device *link) int i, base2 = 0; /* First, look for a generic full-sized window */ - link->io.NumPorts1 = info->multi * 8; + link->resource[0]->end = info->multi * 8; if (pcmcia_loop_config(link, multi_config_check, &base2)) { /* If that didn't work, look for two windows */ - link->io.NumPorts1 = link->io.NumPorts2 = 8; + link->resource[0]->end = link->resource[1]->end = 8; info->multi = 2; if (pcmcia_loop_config(link, multi_config_check_notpicky, &base2)) { diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 208f1b7..7cf0ccb 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -736,24 +736,22 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } return 0; diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index c4cfcff..9ee677f 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -224,24 +224,23 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } return 0; } diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 6d56957..7e41ad9 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -571,24 +571,22 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 29e1daf..b2483f8 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -323,24 +323,22 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index fb10987..c1444b4 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -301,24 +301,22 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; } diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index f37dc22..d50b6c4 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -264,8 +264,8 @@ static const dev_info_t dev_info = "ni_mio_cs"; static int cs_attach(struct pcmcia_device *link) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -310,13 +310,12 @@ static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, { int base, ret; - p_dev->io.NumPorts1 = cfg->io.win[0].len; - p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; - p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; for (base = 0x000; base < 0x400; base += 0x20) { - p_dev->io.BasePort1 = base; - ret = pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = base; + ret = pcmcia_request_io(p_dev); if (!ret) return 0; } diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index 80b8d57..25f4e67 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -1102,26 +1102,24 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static void daqp_cs_config(struct pcmcia_device *link) diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 2361537..f15afd2 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -145,9 +145,8 @@ static int wl_adapter_attach(struct pcmcia_device *link) return -ENOMEM; } - link->io.NumPorts1 = HCF_NUM_IO_PORTS; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - link->io.IOAddrLines = 6; + link->resource[0]->end = HCF_NUM_IO_PORTS; + link->resource[0]->flags = IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 5; @@ -305,8 +304,9 @@ void wl_adapter_insert( struct pcmcia_device *link ) /* Do we need to allocate an interrupt? */ link->conf.Attributes |= CONF_ENABLE_IRQ; + link->io_lines = 6; - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret != 0) goto failed; diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index a801036..a1900e5 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -32,9 +32,8 @@ static int ixj_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "ixj_attach()\n"); /* Create new ixj device */ - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 3; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL); if (!p_dev->priv) { @@ -120,13 +119,14 @@ static int ixj_config_check(struct pcmcia_device *p_dev, { if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; + p_dev->io_lines = 3; if (io->nwin == 2) { - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } - if (!pcmcia_request_io(p_dev, &p_dev->io)) + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 22e04f2..0e13a00 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -162,16 +162,16 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } pcmcia_disable_device(p_dev); return -ENODEV; diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index 0cd8c70..ad71bb5 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -56,23 +56,6 @@ typedef struct config_req_t { #define INT_CARDBUS 0x04 #define INT_ZOOMED_VIDEO 0x08 -/* For RequestIO and ReleaseIO */ -typedef struct io_req_t { - u_int BasePort1; - u_int NumPorts1; - u_int Attributes1; - u_int BasePort2; - u_int NumPorts2; - u_int Attributes2; - u_int IOAddrLines; -} io_req_t; - -/* Attributes for RequestIO and ReleaseIO */ -#define IO_DATA_PATH_WIDTH 0x18 -#define IO_DATA_PATH_WIDTH_8 0x00 -#define IO_DATA_PATH_WIDTH_16 0x08 -#define IO_DATA_PATH_WIDTH_AUTO 0x10 - /* Bits in IRQInfo1 field */ #define IRQ_NMI_ID 0x01 #define IRQ_IOCK_ID 0x02 diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 3dafd7d..0748bec 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -80,7 +80,6 @@ struct pcmcia_device { struct list_head socket_device_list; /* deprecated, will be cleaned up soon */ - io_req_t io; config_req_t conf; window_handle_t win; @@ -88,6 +87,8 @@ struct pcmcia_device { unsigned int irq; struct resource *resource[MAX_IO_WIN]; + unsigned int io_lines; /* number of I/O lines */ + /* Is the device suspended? */ u16 suspended:1; @@ -179,7 +180,7 @@ int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val); int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val); /* device configuration */ -int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req); +int pcmcia_request_io(struct pcmcia_device *p_dev); int __must_check __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, @@ -206,6 +207,22 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win, int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod); void pcmcia_disable_device(struct pcmcia_device *p_dev); +/* IO ports */ +#define IO_DATA_PATH_WIDTH 0x18 +#define IO_DATA_PATH_WIDTH_8 0x00 +#define IO_DATA_PATH_WIDTH_16 0x08 +#define IO_DATA_PATH_WIDTH_AUTO 0x10 + +/* convert flag found in cfgtable to data path width parameter */ +static inline int pcmcia_io_cfg_data_width(unsigned int flags) +{ + if (!(flags & CISTPL_IO_8BIT)) + return IO_DATA_PATH_WIDTH_16; + if (!(flags & CISTPL_IO_16BIT)) + return IO_DATA_PATH_WIDTH_8; + return IO_DATA_PATH_WIDTH_AUTO; +} + #endif /* __KERNEL__ */ #endif /* _LINUX_DS_H */ diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 9f897bc..7ab9174 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -139,8 +139,8 @@ static int snd_pdacf_probe(struct pcmcia_device *link) pdacf->p_dev = link; link->priv = pdacf; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -219,7 +219,7 @@ static int pdacf_config(struct pcmcia_device *link) snd_printdd(KERN_DEBUG "pdacf_config called\n"); link->conf.ConfigIndex = 0x5; - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index f23c235..a6edfc3 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -159,8 +159,8 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl, vxp->p_dev = link; link->priv = chip; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.NumPorts1 = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -226,7 +226,7 @@ static int vxpocket_config(struct pcmcia_device *link) strcpy(chip->card->driver, vxp440_hw.name); } - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; -- 1.7.0.4

2 1

[alsa-devel] [PATCH 07/11] pcmcia: remove memreq_t
by Dominik Brodowski 01 Aug '10

01 Aug '10

Page already had to be set to 0; Offset can easily be passed as parameter to pcmcia_map_mem_page. CC: netdev(a)vger.kernel.org CC: linux-wireless(a)vger.kernel.org CC: linux-ide(a)vger.kernel.org CC: linux-usb(a)vger.kernel.org CC: laforge(a)gnumonks.org CC: linux-mtd(a)lists.infradead.org CC: linux-bluetooth(a)vger.kernel.org CC: alsa-devel(a)alsa-project.org CC: linux-serial(a)vger.kernel.org CC: Michael Buesch <mb(a)bu3sch.de> Signed-off-by: Dominik Brodowski <linux(a)dominikbrodowski.net> --- drivers/char/pcmcia/ipwireless/main.c | 14 ++------------ drivers/isdn/hisax/sedlbauer_cs.c | 7 +++---- drivers/mtd/maps/pcmciamtd.c | 13 ++++++------- drivers/net/pcmcia/fmvj18x_cs.c | 10 ++-------- drivers/net/pcmcia/ibmtr_cs.c | 11 +++-------- drivers/net/pcmcia/pcnet_cs.c | 14 ++++---------- drivers/net/pcmcia/smc91c92_cs.c | 9 +++------ drivers/net/pcmcia/xirc2ps_cs.c | 5 +---- drivers/net/wireless/airo_cs.c | 6 ++---- drivers/net/wireless/b43/pcmcia.c | 5 +---- drivers/net/wireless/ray_cs.c | 13 +++---------- drivers/pcmcia/pcmcia_resource.c | 9 +++------ drivers/scsi/pcmcia/nsp_cs.c | 5 ++--- drivers/staging/comedi/drivers/ni_daq_700.c | 6 ++---- drivers/staging/comedi/drivers/ni_daq_dio24.c | 6 ++---- drivers/staging/comedi/drivers/ni_labpc_cs.c | 6 ++---- include/pcmcia/cs.h | 6 ------ include/pcmcia/ds.h | 2 +- 18 files changed, 42 insertions(+), 105 deletions(-) diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 5f87b9f..6c4aa4b 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -84,8 +84,6 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, { struct ipw_dev *ipw = priv_data; struct resource *io_resource; - memreq_t memreq_attr_memory; - memreq_t memreq_common_memory; int ret; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; @@ -121,11 +119,8 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, if (ret != 0) goto exit1; - memreq_common_memory.CardOffset = cfg->mem.win[0].card_addr; - memreq_common_memory.Page = 0; - ret = pcmcia_map_mem_page(p_dev, ipw->handle_common_memory, - &memreq_common_memory); + cfg->mem.win[0].card_addr); if (ret != 0) goto exit2; @@ -150,12 +145,7 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, if (ret != 0) goto exit2; - memreq_attr_memory.CardOffset = 0; - memreq_attr_memory.Page = 0; - - ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory, - &memreq_attr_memory); - + ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory, 0); if (ret != 0) goto exit3; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 4755eb4..0b06dbb 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -232,7 +232,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, */ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; - memreq_t map; req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; req->Attributes |= WIN_ENABLE; req->Base = mem->win[0].host_addr; @@ -240,9 +239,9 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0) + + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr) != 0) return -ENODEV; } return 0; diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 7948816..f97463e 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -102,7 +102,7 @@ static caddr_t remap_window(struct map_info *map, unsigned long to) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; window_handle_t win = (window_handle_t)map->map_priv_2; - memreq_t mrq; + unsigned int offset; int ret; if (!pcmcia_dev_present(dev->p_dev)) { @@ -110,15 +110,14 @@ static caddr_t remap_window(struct map_info *map, unsigned long to) return 0; } - mrq.CardOffset = to & ~(dev->win_size-1); - if(mrq.CardOffset != dev->offset) { + offset = to & ~(dev->win_size-1); + if (offset != dev->offset) { DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x", - dev->offset, mrq.CardOffset); - mrq.Page = 0; - ret = pcmcia_map_mem_page(dev->p_dev, win, &mrq); + dev->offset, offset); + ret = pcmcia_map_mem_page(dev->p_dev, win, offset); if (ret != 0) return NULL; - dev->offset = mrq.CardOffset; + dev->offset = offset; } return dev->win_base + (to & (dev->win_size-1)); } diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 6993044..98fffb0 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -545,7 +545,6 @@ failed: static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) { win_req_t req; - memreq_t mem; u_char __iomem *base; int i, j; @@ -558,9 +557,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) return -1; base = ioremap(req.Base, req.Size); - mem.Page = 0; - mem.CardOffset = 0; - pcmcia_map_mem_page(link, link->win, &mem); + pcmcia_map_mem_page(link, link->win, 0); /* * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format @@ -594,7 +591,6 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) static int fmvj18x_setup_mfc(struct pcmcia_device *link) { win_req_t req; - memreq_t mem; int i; struct net_device *dev = link->priv; unsigned int ioaddr; @@ -614,9 +610,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link) return -1; } - mem.Page = 0; - mem.CardOffset = 0; - i = pcmcia_map_mem_page(link, link->win, &mem); + i = pcmcia_map_mem_page(link, link->win, 0); if (i != 0) { iounmap(lp->base); lp->base = NULL; diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index 3fd8595..c0b3cdd 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -211,7 +211,6 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) struct net_device *dev = info->dev; struct tok_info *ti = netdev_priv(dev); win_req_t req; - memreq_t mem; int i, ret; dev_dbg(&link->dev, "ibmtr_config\n"); @@ -250,9 +249,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) if (ret) goto failed; - mem.CardOffset = mmiobase; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, link->win, &mem); + ret = pcmcia_map_mem_page(link, link->win, mmiobase); if (ret) goto failed; ti->mmio = ioremap(req.Base, req.Size); @@ -267,13 +264,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) if (ret) goto failed; - mem.CardOffset = srambase; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, info->sram_win_handle, &mem); + ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase); if (ret) goto failed; - ti->sram_base = mem.CardOffset >> 12; + ti->sram_base = srambase >> 12; ti->sram_virt = ioremap(req.Base, req.Size); ti->sram_phys = req.Base; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 9c5fc9d..c3edfe4 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -301,7 +301,6 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) { struct net_device *dev = link->priv; win_req_t req; - memreq_t mem; u_char __iomem *base, *virt; int i, j; @@ -314,10 +313,8 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) return NULL; virt = ioremap(req.Base, req.Size); - mem.Page = 0; for (i = 0; i < NR_INFO; i++) { - mem.CardOffset = hw_info[i].offset & ~(req.Size-1); - pcmcia_map_mem_page(link, link->win, &mem); + pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1)); base = &virt[hw_info[i].offset & (req.Size-1)]; if ((readb(base+0) == hw_info[i].a0) && (readb(base+2) == hw_info[i].a1) && @@ -1463,7 +1460,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); win_req_t req; - memreq_t mem; int i, window_size, offset, ret; window_size = (stop_pg - start_pg) << 8; @@ -1482,11 +1478,9 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, if (ret) goto failed; - mem.CardOffset = (start_pg << 8) + cm_offset; - offset = mem.CardOffset % window_size; - mem.CardOffset -= offset; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, link->win, &mem); + offset = (start_pg << 8) + cm_offset; + offset -= offset % window_size; + ret = pcmcia_map_mem_page(link, link->win, offset); if (ret) goto failed; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index a5e4779..377367d 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -443,7 +443,7 @@ static int mhz_mfc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); win_req_t req; - memreq_t mem; + unsigned int offset; int i; link->conf.Attributes |= CONF_ENABLE_SPKR; @@ -467,11 +467,8 @@ static int mhz_mfc_config(struct pcmcia_device *link) return -ENODEV; smc->base = ioremap(req.Base, req.Size); - mem.CardOffset = mem.Page = 0; - if (smc->manfid == MANFID_MOTOROLA) - mem.CardOffset = link->conf.ConfigBase; - i = pcmcia_map_mem_page(link, link->win, &mem); - + offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0; + i = pcmcia_map_mem_page(link, link->win, offset); if ((i == 0) && (smc->manfid == MANFID_MEGAHERTZ) && (smc->cardid == PRODID_MEGAHERTZ_EM3288)) diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index e051d3a..931d28e 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -870,7 +870,6 @@ xirc2ps_config(struct pcmcia_device * link) if (local->dingo) { win_req_t req; - memreq_t mem; /* Reset the modem's BAR to the correct value * This is necessary because in the RequestConfiguration call, @@ -898,9 +897,7 @@ xirc2ps_config(struct pcmcia_device * link) goto config_error; local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; - mem.CardOffset = 0x0; - mem.Page = 0; - if ((err = pcmcia_map_mem_page(link, link->win, &mem))) + if ((err = pcmcia_map_mem_page(link, link->win, 0))) goto config_error; /* Setup the CCRs; there are no infos in the CIS about the Ethernet diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index d241b4a..d47672c 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -207,16 +207,14 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, */ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; - memreq_t map; req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; req->Base = mem->win[0].host_addr; req->Size = mem->win[0].len; req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr) != 0) return -ENODEV; } /* If we got this far, we're cool! */ diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 7c9af82..ffe1f89 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -64,7 +64,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) { struct ssb_bus *ssb; win_req_t win; - memreq_t mem; int err = -ENOMEM; int res = 0; @@ -87,9 +86,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) if (res != 0) goto err_kfree_ssb; - mem.CardOffset = 0; - mem.Page = 0; - res = pcmcia_map_mem_page(dev, dev->win, &mem); + res = pcmcia_map_mem_page(dev, dev->win, 0); if (res != 0) goto err_disable; diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index b83d5ef..7eb339a 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -393,7 +393,6 @@ static int ray_config(struct pcmcia_device *link) int ret = 0; int i; win_req_t req; - memreq_t mem; struct net_device *dev = (struct net_device *)link->priv; ray_dev_t *local = netdev_priv(dev); @@ -430,9 +429,7 @@ static int ray_config(struct pcmcia_device *link) ret = pcmcia_request_window(link, &req, &link->win); if (ret) goto failed; - mem.CardOffset = 0x0000; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, link->win, &mem); + ret = pcmcia_map_mem_page(link, link->win, 0); if (ret) goto failed; local->sram = ioremap(req.Base, req.Size); @@ -446,9 +443,7 @@ static int ray_config(struct pcmcia_device *link) ret = pcmcia_request_window(link, &req, &local->rmem_handle); if (ret) goto failed; - mem.CardOffset = 0x8000; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem); + ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000); if (ret) goto failed; local->rmem = ioremap(req.Base, req.Size); @@ -462,9 +457,7 @@ static int ray_config(struct pcmcia_device *link) ret = pcmcia_request_window(link, &req, &local->amem_handle); if (ret) goto failed; - mem.CardOffset = 0x0000; - mem.Page = 0; - ret = pcmcia_map_mem_page(link, local->amem_handle, &mem); + ret = pcmcia_map_mem_page(link, local->amem_handle, 0); if (ret) goto failed; local->amem = ioremap(req.Base, req.Size); diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index a48d4a9..975baaa 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -193,7 +193,7 @@ EXPORT_SYMBOL(pcmcia_write_config_byte); int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh, - memreq_t *req) + unsigned int offset) { struct pcmcia_socket *s = p_dev->socket; int ret; @@ -201,12 +201,9 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh, wh--; if (wh >= MAX_WIN) return -EINVAL; - if (req->Page != 0) { - dev_dbg(&s->dev, "failure: requested page is zero\n"); - return -EINVAL; - } + mutex_lock(&s->ops_mutex); - s->win[wh].card_start = req->CardOffset; + s->win[wh].card_start = offset; ret = s->ops->set_mem_map(s, &s->win[wh]); if (ret) dev_warn(&s->dev, "failed to set_mem_map\n"); diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index ad8e896..5688fc3 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1661,7 +1661,6 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, } if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { - memreq_t map; cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; @@ -1673,8 +1672,8 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, cfg_mem->req.AccessSpeed = 0; if (pcmcia_request_window(p_dev, &cfg_mem->req, &p_dev->win) != 0) goto next_entry; - map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr) != 0) goto next_entry; cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size); diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 7e41ad9..abaa40b 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -556,7 +556,6 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { win_req_t *req = priv_data; - memreq_t map; if (cfg->index == 0) return -ENODEV; @@ -602,9 +601,8 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win)) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map)) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr)) return -ENODEV; } /* If we got this far, we're cool! */ diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index b2483f8..caccece 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -308,7 +308,6 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { win_req_t *req = priv_data; - memreq_t map; if (cfg->index == 0) return -ENODEV; @@ -354,9 +353,8 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win)) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map)) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr)) return -ENODEV; } /* If we got this far, we're cool! */ diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index c1444b4..94d9f7f 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -286,7 +286,6 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { win_req_t *req = priv_data; - memreq_t map; if (cfg->index == 0) return -ENODEV; @@ -332,9 +331,8 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, req->AccessSpeed = 0; if (pcmcia_request_window(p_dev, req, &p_dev->win)) return -ENODEV; - map.Page = 0; - map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map)) + if (pcmcia_map_mem_page(p_dev, p_dev->win, + mem->win[0].card_addr)) return -ENODEV; } /* If we got this far, we're cool! */ diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index 583a4e3..e4faf44 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -68,12 +68,6 @@ typedef struct config_req_t { #define PRESENT_IOBASE_3 0x100 #define PRESENT_IOSIZE 0x200 -/* For GetMemPage, MapMemPage */ -typedef struct memreq_t { - u_int CardOffset; - u_short Page; -} memreq_t; - /* For RequestWindow */ typedef struct win_req_t { u_int Attributes; diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 0748bec..a2bf3a7 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -202,7 +202,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_handle_t *wh); int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t win); int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win, - memreq_t *req); + unsigned int offset); int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod); void pcmcia_disable_device(struct pcmcia_device *p_dev); -- 1.7.0.4

1 0

[alsa-devel] [PATCH] ASoC: Initial WM8741 CODEC driver
by Ian Lartey 31 Jul '10

31 Jul '10

The WM8741 is a very high performance stereo DAC designed for audio applications such as professional recording systems, A/V receivers and high specification CD, DVD and home theatre systems. The device supports PCM data input word lengths from 16 to 32-bits and sampling rates up to 192kHz. The WM8741 also supports DSD bit-stream data format, in both direct DSD and PCM-converted DSD modes. TODO: Expand wm8741_set_dai_sysclk and rate_constraint members to allow for all supported sample rate / Master Clock frequency combinations. Fully enable control of supplies. Signed-off-by: Ian Lartey <ian(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm8741.c | 579 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8741.h | 214 +++++++++++++++++ 4 files changed, 799 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm8741.c create mode 100644 sound/soc/codecs/wm8741.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 55bc2be..83f5c67 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -50,6 +50,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8727 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI + select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI @@ -214,6 +215,9 @@ config SND_SOC_WM8728 config SND_SOC_WM8731 tristate +config SND_SOC_WM8741 + tristate + config SND_SOC_WM8750 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index d8d9eeb..5352409 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -35,6 +35,7 @@ snd-soc-wm8711-objs := wm8711.o snd-soc-wm8727-objs := wm8727.o snd-soc-wm8728-objs := wm8728.o snd-soc-wm8731-objs := wm8731.o +snd-soc-wm8741-objs := wm8741.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o snd-soc-wm8776-objs := wm8776.o @@ -103,6 +104,7 @@ obj-$(CONFIG_SND_SOC_WM8711) += snd-soc-wm8711.o obj-$(CONFIG_SND_SOC_WM8727) += snd-soc-wm8727.o obj-$(CONFIG_SND_SOC_WM8728) += snd-soc-wm8728.o obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o +obj-$(CONFIG_SND_SOC_WM8741) += snd-soc-wm8741.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o obj-$(CONFIG_SND_SOC_WM8776) += snd-soc-wm8776.o diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c new file mode 100644 index 0000000..67a9f4f --- /dev/null +++ b/sound/soc/codecs/wm8741.c @@ -0,0 +1,579 @@ +/* + * wm8741.c -- WM8741 ALSA SoC Audio driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Ian Lartey <ian(a)opensource.wolfsonmicro.com> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "wm8741.h" + +static struct snd_soc_codec *wm8741_codec; +struct snd_soc_codec_device soc_codec_dev_wm8741; + +#define WM8741_NUM_SUPPLIES 2 +static const char *wm8741_supply_names[WM8741_NUM_SUPPLIES] = { + "AVDD", + "DVDD", +}; + +#define WM8741_NUM_RATES 4 + +/* codec private data */ +struct wm8741_priv { + struct snd_soc_codec codec; + u16 reg_cache[WM8741_REGISTER_COUNT]; + struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES]; + unsigned int sysclk; + unsigned int rate_constraint_list[WM8741_NUM_RATES]; + struct snd_pcm_hw_constraint_list rate_constraint; +}; + +static const u16 wm8741_reg_defaults[WM8741_REGISTER_COUNT] = { + 0x0000, /* R0 - DACLLSB Attenuation */ + 0x0000, /* R1 - DACLMSB Attenuation */ + 0x0000, /* R2 - DACRLSB Attenuation */ + 0x0000, /* R3 - DACRMSB Attenuation */ + 0x0000, /* R4 - Volume Control */ + 0x000A, /* R5 - Format Control */ + 0x0000, /* R6 - Filter Control */ + 0x0000, /* R7 - Mode Control 1 */ + 0x0002, /* R8 - Mode Control 2 */ + 0x0000, /* R9 - Reset */ + 0x0002, /* R32 - ADDITONAL_CONTROL_1 */ +}; + + +static int wm8741_reset(struct snd_soc_codec *codec) +{ + return snd_soc_write(codec, WM8741_RESET, 0); +} + +static const DECLARE_TLV_DB_SCALE(dac_tlv_fine, -12700, 13, 0); +static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 400, 0); + +static const struct snd_kcontrol_new wm8741_snd_controls[] = { +SOC_DOUBLE_R_TLV("Fine Playback Volume", WM8741_DACLLSB_ATTENUATION, + WM8741_DACRLSB_ATTENUATION, 1, 255, 1, dac_tlv_fine), +SOC_DOUBLE_R_TLV("Playback Volume", WM8741_DACLMSB_ATTENUATION, + WM8741_DACRMSB_ATTENUATION, 0, 511, 1, dac_tlv), +}; + +static const struct snd_soc_dapm_widget wm8741_dapm_widgets[] = { +SND_SOC_DAPM_DAC("DACL", "Playback", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_DAC("DACR", "Playback", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_OUTPUT("VOUTLP"), +SND_SOC_DAPM_OUTPUT("VOUTLN"), +SND_SOC_DAPM_OUTPUT("VOUTRP"), +SND_SOC_DAPM_OUTPUT("VOUTRN"), +}; + +static const struct snd_soc_dapm_route intercon[] = { + { "VOUTLP", NULL, "DACL" }, + { "VOUTLN", NULL, "DACL" }, + { "VOUTRP", NULL, "DACR" }, + { "VOUTRN", NULL, "DACR" }, +}; + +static int wm8741_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8741_dapm_widgets, + ARRAY_SIZE(wm8741_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + return 0; +} + +static struct { + int value; + int ratio; +} lrclk_ratios[WM8741_NUM_RATES] = { + { 1, 256 }, + { 2, 384 }, + { 3, 512 }, + { 4, 768 }, +}; + + +static int wm8741_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); + + /* The set of sample rates that can be supported depends on the + * MCLK supplied to the CODEC - enforce this. + */ + if (!wm8741->sysclk) { + dev_err(codec->dev, + "No MCLK configured, call set_sysclk() on init\n"); + return -EINVAL; + } + + snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &wm8741->rate_constraint); + + return 0; +} + +static int wm8741_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); + u16 iface = snd_soc_read(codec, WM8741_FORMAT_CONTROL) & 0x1FC; + int i; + + /* Find a supported LRCLK ratio */ + for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { + if (wm8741->sysclk / params_rate(params) == + lrclk_ratios[i].ratio) + break; + } + + /* Should never happen, should be handled by constraints */ + if (i == ARRAY_SIZE(lrclk_ratios)) { + dev_err(codec->dev, "MCLK/fs ratio %d unsupported\n", + wm8741->sysclk / params_rate(params)); + return -EINVAL; + } + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x0001; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x0002; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= 0x0003; + break; + default: + dev_dbg(codec->dev, "wm8741_hw_params: Unsupported bit size param = %d", + params_format(params)); + return -EINVAL; + } + + dev_dbg(codec->dev, "wm8741_hw_params: bit size param = %d", + params_format(params)); + + snd_soc_write(codec, WM8741_FORMAT_CONTROL, iface); + return 0; +} + +static int wm8741_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); + unsigned int val; + int i; + + dev_dbg(codec->dev, "wm8741_set_dai_sysclk info: freq=%dHz\n", freq); + + wm8741->sysclk = freq; + + wm8741->rate_constraint.count = 0; + + for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { + dev_dbg(codec->dev, "index = %d, ratio = %d, freq = %d", + i, lrclk_ratios[i].ratio, freq); + + val = freq / lrclk_ratios[i].ratio; + /* Check that it's a standard rate since core can't + * cope with others and having the odd rates confuses + * constraint matching. + */ + switch (val) { + case 32000: + case 44100: + case 48000: + case 64000: + case 88200: + case 96000: + dev_dbg(codec->dev, "Supported sample rate: %dHz\n", + val); + wm8741->rate_constraint_list[i] = val; + wm8741->rate_constraint.count++; + break; + default: + dev_dbg(codec->dev, "Skipping sample rate: %dHz\n", + val); + } + } + + /* Need at least one supported rate... */ + if (wm8741->rate_constraint.count == 0) + return -EINVAL; + + return 0; +} + +static int wm8741_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = snd_soc_read(codec, WM8741_FORMAT_CONTROL) & 0x1C3; + + /* check master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x0008; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x0004; + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= 0x0003; + break; + case SND_SOC_DAIFMT_DSP_B: + iface |= 0x0013; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x0010; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x0020; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x0030; + break; + default: + return -EINVAL; + } + + + dev_dbg(codec->dev, "wm8741_set_dai_fmt: Format=%x, Clock Inv=%x \n", + fmt & SND_SOC_DAIFMT_FORMAT_MASK, + ((fmt & SND_SOC_DAIFMT_INV_MASK))); + + snd_soc_write(codec, WM8741_FORMAT_CONTROL, iface); + return 0; +} + +#define WM8741_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000) + +#define WM8741_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8741_dai_ops = { + .startup = wm8741_startup, + .hw_params = wm8741_hw_params, + .set_sysclk = wm8741_set_dai_sysclk, + .set_fmt = wm8741_set_dai_fmt, +}; + +struct snd_soc_dai wm8741_dai = { + .name = "WM8741", + .playback = { + .stream_name = "Playback", + .channels_min = 2, /* Mono modes not yet supported */ + .channels_max = 2, + .rates = WM8741_RATES, + .formats = WM8741_FORMATS, + }, + .ops = &wm8741_dai_ops, +}; +EXPORT_SYMBOL_GPL(wm8741_dai); + +#ifdef CONFIG_PM +static int wm8741_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + u16 *cache = codec->reg_cache; + int i; + + /* RESTORE REG Cache */ + for (i = 0; i < WM8741_REGISTER_COUNT; i++) { + if (cache[i] == wm8741_reg_defaults[i]) + continue; + snd_soc_write(codec, i, cache[i]); + } + return 0; +} +#else +#define wm8741_suspend NULL +#define wm8741_resume NULL +#endif + +static int wm8741_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + if (wm8741_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } + + socdev->card->codec = wm8741_codec; + codec = wm8741_codec; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + snd_soc_add_controls(codec, wm8741_snd_controls, + ARRAY_SIZE(wm8741_snd_controls)); + wm8741_add_widgets(codec); + + return ret; + +pcm_err: + return ret; +} + +static int wm8741_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8741 = { + .probe = wm8741_probe, + .remove = wm8741_remove, + .resume = wm8741_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8741); + +static int wm8741_register(struct wm8741_priv *wm8741, + enum snd_soc_control_type control) +{ + int ret; + struct snd_soc_codec *codec = &wm8741->codec; + int i; + + if (wm8741_codec) { + dev_err(codec->dev, "Another WM8741 is registered\n"); + return -EINVAL; + } + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + snd_soc_codec_set_drvdata(codec, wm8741); + codec->name = "WM8741"; + codec->owner = THIS_MODULE; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = NULL; + codec->dai = &wm8741_dai; + codec->num_dai = 1; + codec->reg_cache_size = WM8741_REGISTER_COUNT; + codec->reg_cache = &wm8741->reg_cache; + + wm8741->rate_constraint.list = &wm8741->rate_constraint_list[0]; + wm8741->rate_constraint.count = + ARRAY_SIZE(wm8741->rate_constraint_list); + + memcpy(codec->reg_cache, wm8741_reg_defaults, + sizeof(wm8741->reg_cache)); + + ret = snd_soc_codec_set_cache_io(codec, 7, 9, control); + if (ret != 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + goto err; + } + + for (i = 0; i < ARRAY_SIZE(wm8741->supplies); i++) + wm8741->supplies[i].supply = wm8741_supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8741->supplies), + wm8741->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + goto err; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8741->supplies), + wm8741->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + goto err_get; + } + + ret = wm8741_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + goto err_enable; + } + + wm8741_dai.dev = codec->dev; + + /* Change some default settings - latch VU */ + wm8741->reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL; + wm8741->reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM; + wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL; + wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM; + + wm8741_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&wm8741_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } + + dev_dbg(codec->dev, "Successful registration\n"); + return 0; + +err_enable: + regulator_bulk_disable(ARRAY_SIZE(wm8741->supplies), wm8741->supplies); + +err_get: + regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies); + +err: + kfree(wm8741); + return ret; +} + +static void wm8741_unregister(struct wm8741_priv *wm8741) +{ + regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies); + + snd_soc_unregister_dai(&wm8741_dai); + snd_soc_unregister_codec(&wm8741->codec); + kfree(wm8741); + wm8741_codec = NULL; +} + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static __devinit int wm8741_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8741_priv *wm8741; + struct snd_soc_codec *codec; + + wm8741 = kzalloc(sizeof(struct wm8741_priv), GFP_KERNEL); + if (wm8741 == NULL) + return -ENOMEM; + + codec = &wm8741->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + + i2c_set_clientdata(i2c, wm8741); + codec->control_data = i2c; + + codec->dev = &i2c->dev; + + return wm8741_register(wm8741, SND_SOC_I2C); +} + +static __devexit int wm8741_i2c_remove(struct i2c_client *client) +{ + struct wm8741_priv *wm8741 = i2c_get_clientdata(client); + wm8741_unregister(wm8741); + return 0; +} + +static const struct i2c_device_id wm8741_i2c_id[] = { + { "wm8741", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8741_i2c_id); + + +static struct i2c_driver wm8741_i2c_driver = { + .driver = { + .name = "WM8741", + .owner = THIS_MODULE, + }, + .probe = wm8741_i2c_probe, + .remove = __devexit_p(wm8741_i2c_remove), + .id_table = wm8741_i2c_id, +}; +#endif + +static int __init wm8741_modinit(void) +{ + int ret; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&wm8741_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8741 I2C driver: %d\n", + ret); + } +#endif + return 0; +} +module_init(wm8741_modinit); + +static void __exit wm8741_exit(void) +{ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8741_i2c_driver); +#endif +} +module_exit(wm8741_exit); + +MODULE_DESCRIPTION("ASoC WM8741 driver"); +MODULE_AUTHOR("Ian Lartey <ian(a)opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8741.h b/sound/soc/codecs/wm8741.h new file mode 100644 index 0000000..fdef6ec --- /dev/null +++ b/sound/soc/codecs/wm8741.h @@ -0,0 +1,214 @@ +/* + * wm8741.h -- WM8423 ASoC driver + * + * Copyright 2010 Wolfson Microelectronics, plc + * + * Author: Ian Lartey <ian(a)opensource.wolfsonmicro.com> + * + * Based on wm8753.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8741_H +#define _WM8741_H + +/* + * Register values. + */ +#define WM8741_DACLLSB_ATTENUATION 0x00 +#define WM8741_DACLMSB_ATTENUATION 0x01 +#define WM8741_DACRLSB_ATTENUATION 0x02 +#define WM8741_DACRMSB_ATTENUATION 0x03 +#define WM8741_VOLUME_CONTROL 0x04 +#define WM8741_FORMAT_CONTROL 0x05 +#define WM8741_FILTER_CONTROL 0x06 +#define WM8741_MODE_CONTROL_1 0x07 +#define WM8741_MODE_CONTROL_2 0x08 +#define WM8741_RESET 0x09 +#define WM8741_ADDITIONAL_CONTROL_1 0x20 + +#define WM8741_REGISTER_COUNT 11 +#define WM8741_MAX_REGISTER 0x20 + +/* + * Field Definitions. + */ + +/* + * R0 (0x00) - DACLLSB_ATTENUATION + */ +#define WM8741_UPDATELL 0x0020 /* UPDATELL */ +#define WM8741_UPDATELL_MASK 0x0020 /* UPDATELL */ +#define WM8741_UPDATELL_SHIFT 5 /* UPDATELL */ +#define WM8741_UPDATELL_WIDTH 1 /* UPDATELL */ +#define WM8741_LAT_4_0_MASK 0x001F /* LAT[4:0] - [4:0] */ +#define WM8741_LAT_4_0_SHIFT 0 /* LAT[4:0] - [4:0] */ +#define WM8741_LAT_4_0_WIDTH 5 /* LAT[4:0] - [4:0] */ + +/* + * R1 (0x01) - DACLMSB_ATTENUATION + */ +#define WM8741_UPDATELM 0x0020 /* UPDATELM */ +#define WM8741_UPDATELM_MASK 0x0020 /* UPDATELM */ +#define WM8741_UPDATELM_SHIFT 5 /* UPDATELM */ +#define WM8741_UPDATELM_WIDTH 1 /* UPDATELM */ +#define WM8741_LAT_9_5_0_MASK 0x001F /* LAT[9:5] - [4:0] */ +#define WM8741_LAT_9_5_0_SHIFT 0 /* LAT[9:5] - [4:0] */ +#define WM8741_LAT_9_5_0_WIDTH 5 /* LAT[9:5] - [4:0] */ + +/* + * R2 (0x02) - DACRLSB_ATTENUATION + */ +#define WM8741_UPDATERL 0x0020 /* UPDATERL */ +#define WM8741_UPDATERL_MASK 0x0020 /* UPDATERL */ +#define WM8741_UPDATERL_SHIFT 5 /* UPDATERL */ +#define WM8741_UPDATERL_WIDTH 1 /* UPDATERL */ +#define WM8741_RAT_4_0_MASK 0x001F /* RAT[4:0] - [4:0] */ +#define WM8741_RAT_4_0_SHIFT 0 /* RAT[4:0] - [4:0] */ +#define WM8741_RAT_4_0_WIDTH 5 /* RAT[4:0] - [4:0] */ + +/* + * R3 (0x03) - DACRMSB_ATTENUATION + */ +#define WM8741_UPDATERM 0x0020 /* UPDATERM */ +#define WM8741_UPDATERM_MASK 0x0020 /* UPDATERM */ +#define WM8741_UPDATERM_SHIFT 5 /* UPDATERM */ +#define WM8741_UPDATERM_WIDTH 1 /* UPDATERM */ +#define WM8741_RAT_9_5_0_MASK 0x001F /* RAT[9:5] - [4:0] */ +#define WM8741_RAT_9_5_0_SHIFT 0 /* RAT[9:5] - [4:0] */ +#define WM8741_RAT_9_5_0_WIDTH 5 /* RAT[9:5] - [4:0] */ + +/* + * R4 (0x04) - VOLUME_CONTROL + */ +#define WM8741_AMUTE 0x0080 /* AMUTE */ +#define WM8741_AMUTE_MASK 0x0080 /* AMUTE */ +#define WM8741_AMUTE_SHIFT 7 /* AMUTE */ +#define WM8741_AMUTE_WIDTH 1 /* AMUTE */ +#define WM8741_ZFLAG_MASK 0x0060 /* ZFLAG - [6:5] */ +#define WM8741_ZFLAG_SHIFT 5 /* ZFLAG - [6:5] */ +#define WM8741_ZFLAG_WIDTH 2 /* ZFLAG - [6:5] */ +#define WM8741_IZD 0x0010 /* IZD */ +#define WM8741_IZD_MASK 0x0010 /* IZD */ +#define WM8741_IZD_SHIFT 4 /* IZD */ +#define WM8741_IZD_WIDTH 1 /* IZD */ +#define WM8741_SOFT 0x0008 /* SOFT MUTE */ +#define WM8741_SOFT_MASK 0x0008 /* SOFT MUTE */ +#define WM8741_SOFT_SHIFT 3 /* SOFT MUTE */ +#define WM8741_SOFT_WIDTH 1 /* SOFT MUTE */ +#define WM8741_ATC 0x0004 /* ATC */ +#define WM8741_ATC_MASK 0x0004 /* ATC */ +#define WM8741_ATC_SHIFT 2 /* ATC */ +#define WM8741_ATC_WIDTH 1 /* ATC */ +#define WM8741_ATT2DB 0x0002 /* ATT2DB */ +#define WM8741_ATT2DB_MASK 0x0002 /* ATT2DB */ +#define WM8741_ATT2DB_SHIFT 1 /* ATT2DB */ +#define WM8741_ATT2DB_WIDTH 1 /* ATT2DB */ +#define WM8741_VOL_RAMP 0x0001 /* VOL_RAMP */ +#define WM8741_VOL_RAMP_MASK 0x0001 /* VOL_RAMP */ +#define WM8741_VOL_RAMP_SHIFT 0 /* VOL_RAMP */ +#define WM8741_VOL_RAMP_WIDTH 1 /* VOL_RAMP */ + +/* + * R5 (0x05) - FORMAT_CONTROL + */ +#define WM8741_PWDN 0x0080 /* PWDN */ +#define WM8741_PWDN_MASK 0x0080 /* PWDN */ +#define WM8741_PWDN_SHIFT 7 /* PWDN */ +#define WM8741_PWDN_WIDTH 1 /* PWDN */ +#define WM8741_REV 0x0040 /* REV */ +#define WM8741_REV_MASK 0x0040 /* REV */ +#define WM8741_REV_SHIFT 6 /* REV */ +#define WM8741_REV_WIDTH 1 /* REV */ +#define WM8741_BCP 0x0020 /* BCP */ +#define WM8741_BCP_MASK 0x0020 /* BCP */ +#define WM8741_BCP_SHIFT 5 /* BCP */ +#define WM8741_BCP_WIDTH 1 /* BCP */ +#define WM8741_LRP 0x0010 /* LRP */ +#define WM8741_LRP_MASK 0x0010 /* LRP */ +#define WM8741_LRP_SHIFT 4 /* LRP */ +#define WM8741_LRP_WIDTH 1 /* LRP */ +#define WM8741_FMT_MASK 0x000C /* FMT - [3:2] */ +#define WM8741_FMT_SHIFT 2 /* FMT - [3:2] */ +#define WM8741_FMT_WIDTH 2 /* FMT - [3:2] */ +#define WM8741_IWL_MASK 0x0003 /* IWL - [1:0] */ +#define WM8741_IWL_SHIFT 0 /* IWL - [1:0] */ +#define WM8741_IWL_WIDTH 2 /* IWL - [1:0] */ + +/* + * R6 (0x06) - FILTER_CONTROL + */ +#define WM8741_ZFLAG_HI 0x0080 /* ZFLAG_HI */ +#define WM8741_ZFLAG_HI_MASK 0x0080 /* ZFLAG_HI */ +#define WM8741_ZFLAG_HI_SHIFT 7 /* ZFLAG_HI */ +#define WM8741_ZFLAG_HI_WIDTH 1 /* ZFLAG_HI */ +#define WM8741_DEEMPH_MASK 0x0060 /* DEEMPH - [6:5] */ +#define WM8741_DEEMPH_SHIFT 5 /* DEEMPH - [6:5] */ +#define WM8741_DEEMPH_WIDTH 2 /* DEEMPH - [6:5] */ +#define WM8741_DSDFILT_MASK 0x0018 /* DSDFILT - [4:3] */ +#define WM8741_DSDFILT_SHIFT 3 /* DSDFILT - [4:3] */ +#define WM8741_DSDFILT_WIDTH 2 /* DSDFILT - [4:3] */ +#define WM8741_FIRSEL_MASK 0x0007 /* FIRSEL - [2:0] */ +#define WM8741_FIRSEL_SHIFT 0 /* FIRSEL - [2:0] */ +#define WM8741_FIRSEL_WIDTH 3 /* FIRSEL - [2:0] */ + +/* + * R7 (0x07) - MODE_CONTROL_1 + */ +#define WM8741_MODE8X 0x0080 /* MODE8X */ +#define WM8741_MODE8X_MASK 0x0080 /* MODE8X */ +#define WM8741_MODE8X_SHIFT 7 /* MODE8X */ +#define WM8741_MODE8X_WIDTH 1 /* MODE8X */ +#define WM8741_OSR_MASK 0x0060 /* OSR - [6:5] */ +#define WM8741_OSR_SHIFT 5 /* OSR - [6:5] */ +#define WM8741_OSR_WIDTH 2 /* OSR - [6:5] */ +#define WM8741_SR_MASK 0x001C /* SR - [4:2] */ +#define WM8741_SR_SHIFT 2 /* SR - [4:2] */ +#define WM8741_SR_WIDTH 3 /* SR - [4:2] */ +#define WM8741_MODESEL_MASK 0x0003 /* MODESEL - [1:0] */ +#define WM8741_MODESEL_SHIFT 0 /* MODESEL - [1:0] */ +#define WM8741_MODESEL_WIDTH 2 /* MODESEL - [1:0] */ + +/* + * R8 (0x08) - MODE_CONTROL_2 + */ +#define WM8741_DSD_GAIN 0x0040 /* DSD_GAIN */ +#define WM8741_DSD_GAIN_MASK 0x0040 /* DSD_GAIN */ +#define WM8741_DSD_GAIN_SHIFT 6 /* DSD_GAIN */ +#define WM8741_DSD_GAIN_WIDTH 1 /* DSD_GAIN */ +#define WM8741_SDOUT 0x0020 /* SDOUT */ +#define WM8741_SDOUT_MASK 0x0020 /* SDOUT */ +#define WM8741_SDOUT_SHIFT 5 /* SDOUT */ +#define WM8741_SDOUT_WIDTH 1 /* SDOUT */ +#define WM8741_DOUT 0x0010 /* DOUT */ +#define WM8741_DOUT_MASK 0x0010 /* DOUT */ +#define WM8741_DOUT_SHIFT 4 /* DOUT */ +#define WM8741_DOUT_WIDTH 1 /* DOUT */ +#define WM8741_DIFF_MASK 0x000C /* DIFF - [3:2] */ +#define WM8741_DIFF_SHIFT 2 /* DIFF - [3:2] */ +#define WM8741_DIFF_WIDTH 2 /* DIFF - [3:2] */ +#define WM8741_DITHER_MASK 0x0003 /* DITHER - [1:0] */ +#define WM8741_DITHER_SHIFT 0 /* DITHER - [1:0] */ +#define WM8741_DITHER_WIDTH 2 /* DITHER - [1:0] */ + +/* + * R32 (0x20) - ADDITONAL_CONTROL_1 + */ +#define WM8741_DSD_LEVEL 0x0002 /* DSD_LEVEL */ +#define WM8741_DSD_LEVEL_MASK 0x0002 /* DSD_LEVEL */ +#define WM8741_DSD_LEVEL_SHIFT 1 /* DSD_LEVEL */ +#define WM8741_DSD_LEVEL_WIDTH 1 /* DSD_LEVEL */ +#define WM8741_DSD_NO_NOTCH 0x0001 /* DSD_NO_NOTCH */ +#define WM8741_DSD_NO_NOTCH_MASK 0x0001 /* DSD_NO_NOTCH */ +#define WM8741_DSD_NO_NOTCH_SHIFT 0 /* DSD_NO_NOTCH */ +#define WM8741_DSD_NO_NOTCH_WIDTH 1 /* DSD_NO_NOTCH */ + +#define WM8741_SYSCLK 0 + +extern struct snd_soc_dai wm8741_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8741; + +#endif -- 1.7.0.4

3 4

[alsa-devel] [PATCH]alsa:patch_realtek.c Add support for the MacBookAir1, 1
by Justin P. Mattock 30 Jul '10

30 Jul '10

This patch adds support for the MacBookAir1,1 Note:I do not have this machine on hand only the codec#0 file for the machine.. located at https://bugs.launchpad.net/mactel-support/+bug/268301 So please test if you have the appropriate equipment, and report any issues to the alsa devel list (alsa-devel(a)alsa-project.org). Signed-off-by: Justin P. Mattock <justinmattock(a)gmail.com> --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_realtek.c | 59 +++++++++++++++++++++++++- 2 files changed, 58 insertions(+), 2 deletions(-) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 1d38b0d..d3838b5 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -125,6 +125,7 @@ ALC882/883/885/888/889 macpro MacPro support mb5 Macbook 5,1 macmini3 Macmini 3,1 + mba11 MacBook Air 1,1 mba21 Macbook Air 2,1 mbp3 Macbook Pro rev3 imac24 iMac 24'' with jack detection diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index fc767b6..1dcf78c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -209,6 +209,7 @@ enum { ALC882_ASUS_A7J, ALC882_ASUS_A7M, ALC885_MACPRO, + ALC885_MBA11, ALC885_MBA21, ALC885_MBP3, ALC885_MB5, @@ -7444,6 +7445,13 @@ static struct snd_kcontrol_new alc885_mba21_mixer[] = { { } }; +/* MacBookAir1,1 not sure what/where things are(dont have the machine). */ + +static struct snd_kcontrol_new alc885_mba11_mixer[] = { + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT), + HDA_BIND_MUTE("Speaker Playback Switch", 0x0c, 0x02, HDA_OUTPUT), + { } +}; static struct snd_kcontrol_new alc885_mbp3_mixer[] = { HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT), @@ -7929,6 +7937,40 @@ static struct hda_verb alc885_mba21_init_verbs[] = { { } }; +static struct hda_verb alc885_mba11_init_verbs[] = { + /*Internal and HP Speaker Mixer*/ + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + /* Main Speaker */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, (PIN_OUT | AC_PINCTL_VREF_50) }, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, + /* HP jack */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, (ALC880_HP_EVENT | AC_USRSP_EN)}, + /* FIXME: Line in? (as well as the mic). */ + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_VREF_50}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + /* 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */ + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + /* 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */ + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + { } +}; /* Macbook Pro rev3 */ static struct hda_verb alc885_mbp3_init_verbs[] = { @@ -9298,6 +9340,7 @@ static const char *alc882_models[ALC882_MODEL_LAST] = { [ALC885_MACPRO] = "macpro", [ALC885_MB5] = "mb5", [ALC885_MACMINI3] = "macmini3", + [ALC885_MBA11] = "mba11", [ALC885_MBA21] = "mba21", [ALC885_MBP3] = "mbp3", [ALC885_IMAC24] = "imac24", @@ -9478,7 +9521,7 @@ static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = { SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3), SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889A_MB31), SND_PCI_QUIRK(0x106b, 0x3200, "iMac 7,1 Aluminum", ALC882_ASUS_A7M), - SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC885_MBP3), + SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC885_MBA11), SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC885_MBA21), SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31), SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3), @@ -9542,7 +9585,19 @@ static struct alc_config_preset alc882_presets[] = { .input_mux = &alc882_capture_source, .dig_out_nid = ALC882_DIGOUT_NID, }, - [ALC885_MBA21] = { + [ALC885_MBA11] = { + .mixers = { alc885_mba11_mixer }, + .init_verbs = { alc885_mba11_init_verbs, alc880_gpio1_init_verbs }, + .num_dacs = 2, + .dac_nids = alc882_dac_nids, + .channel_mode = alc885_mba21_ch_modes, + .num_channel_mode = ARRAY_SIZE(alc885_mba21_ch_modes), + .input_mux = &alc882_capture_source, + .unsol_event = alc_automute_amp_unsol_event, + .setup = alc885_mbp3_setup, + .init_hook = alc_automute_amp, + }, + [ALC885_MBA21] = { .mixers = { alc885_mba21_mixer }, .init_verbs = { alc885_mba21_init_verbs, alc880_gpio1_init_verbs }, .num_dacs = 2, -- 1.7.1.rc1.21.gf3bd6

2 2

[alsa-devel] Support MCP89 hdmi audio
by Wei Ni 30 Jul '10

30 Jul '10

Hi, all I'm an Nvidia engineer, I maintain the nvidia linux hdmi audio driver. An end-user report a problem with his TV attached to an MCP89. ALSA won't send audio to it, because PD=3D0: HDMI hot plug event: Pin=3D5 Presence_Detect=3D1 ELD_Valid=3D0 HDMI hot plug event: Pin=3D5 Presence_Detect=3D0 ELD_Valid=3D1 As you know, in linux driver patch_hdmi.c, it use (pind && eldv) in unsolicited events. So the driver can't detect the monitor. _From the HAD specification (http://download.intel.com/standards/hdaudio/pdf/HDA036.pdf): Original text for Unsolicited Response PD bit: Presence Detect: When this bit is set, sense measurement has changed on the pin widget and software can use the pin sense control verb to determine the current pin sense data state. For analog pin widgets, this UR means that Presence Detect or Impedance has changed on the pin widget. For digital pin widgets, including HDMI pin widgets, this means that presence detect (and optionally ELD valid bit) has **changed**. [my emphasis] Updated text for Unsolicted Response PD bit: Presence Detect: This bit reflects the **present** [my emphasis] state of the Pin Sense Presence Detect bit when the unsolicited response is triggered. Software can optionally use the pin sense control verb to determine the latest pin sense data state. This bit implementation is only required for digital display pin widget. Non digital display pin widget is optional to implement this bit. For our MCP89, the values indicates the change of status of PD, not the a= ctual value of PD, which follows older description of UR for PD bit. So could we add a workaround for MCP89? We could use Pin Sense to determi= ne again in unsolicited events. If it return 0xc0000000, it means PD=3D1 and ELVD=3D1= . Or do you have any suggestions? Thanks Wei. -------------------------------------------------------------------------= ---------- This email message is for the sole use of the intended recipient(s) and m= ay contain confidential information. Any unauthorized review, use, disclosure or di= stribution is prohibited. If you are not the intended recipient, please contact the= =20sender by reply email and destroy all copies of the original message. -------------------------------------------------------------------------= ----------

4 8

[alsa-devel] Enabling HDMI HBR mode on Intel HDA
by Anssi Hannula 30 Jul '10

30 Jul '10

Hi all! We have been trying to get truehd/mlp/mat passthrough to work, with no luck so far. As HDMI standard requires a separate transmission mode (i.e. HBR Audio Stream Packets instead of Audio Sample Packets) for high-bitrate (over 6.144Mbps) compressed formats, a driver change is needed, AFAIU. Attached is a hack we have been using with hda_intel driver (the patch is for generic code; we have been using nvidia 8x codec if that matters). Could anyone familiar with Intel HDA confirm whether the hack looks correct, or if something more is required? (0x05 is the hardcoded pin nid). It would help to know for sure that the problem is in our iso61937/mat encapsulation and not in the temporary driver hack. Thanks, -- Anssi Hannula

1 1

[alsa-devel] [PATCH - usb: Headphone support for cm6206 1/2] usb: move snd_usb_cm106_write_int_reg to mixer_quirks.c
by Adrian Pardini 30 Jul '10

30 Jul '10

Hi all, this series of patches adds another control to cm6206 based cards to let the user select wich ouput the "Headphone" jack mirrors. Please review. Thanks. Signed-off-by: Adrian Pardini <adrian.pardini(a)solar.org.ar> diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index e7df1e5..c4cbbc0 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -354,6 +354,22 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, } } +/* + * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely + * documented in the device's data sheet. + */ +int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value) +{ + u8 buf[4]; + buf[0] = 0x20; + buf[1] = value & 0xff; + buf[2] = (value >> 8) & 0xff; + buf[3] = reg; + return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, + 0, 0, &buf, 4, 1000); +} + int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) { int err; diff --git a/sound/usb/mixer_quirks.h b/sound/usb/mixer_quirks.h index bdbfab0..bc5d577 100644 --- a/sound/usb/mixer_quirks.h +++ b/sound/usb/mixer_quirks.h @@ -9,5 +9,7 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer, int unitid); +int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value); + #endif /* SND_USB_MIXER_QUIRKS_H */ diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 9a9da09..b8a5a18 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -353,22 +353,6 @@ static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev) return 0; } -/* - * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely - * documented in the device's data sheet. - */ -static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value) -{ - u8 buf[4]; - buf[0] = 0x20; - buf[1] = value & 0xff; - buf[2] = (value >> 8) & 0xff; - buf[3] = reg; - return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, - 0, 0, &buf, 4, 1000); -} - static int snd_usb_cm106_boot_quirk(struct usb_device *dev) { /* -- 1.5.4.3 -- Adrian. http://elesquinazotango.com.ar http://www.noalcodigodescioli.blogspot.com/

2 6

[alsa-devel] HDMI out with Zepto Nox A14, help for a patch
by Damien Thébault 30 Jul '10

30 Jul '10

Hello, My laptop is a Zepto Nox A14, with an ALC 262 audio chip. HDMI is connected through an NVIDIA GeForce 9600 graphic card. After some investigation, it appears that to output HDMI audio, I have to use the sound card which has a digital out for HDMI connected to the graphic card (there is no nvhdmi thing). I noticed with hda_analyser that there are two digital audio out nodes, the first one is the default ALC 262 one (S/PDIF). With the default configuration, when I enable what's called "HDMI" it's S/PDIF that is enabled (and I can see the red light on the mini-TOSLINK jack when it's enabled). So I was thinking that the second digital out was for the real HDMI. I went into patch_realtek.c and used the id of the second digital out (0x10) instead of ALC_262_DIGOUT_NID (0x06) in alc262_parse_auto_config. That allowed me to have a alsa device hw:0,3 connected to the digital out 0x10 instead of having it on 0x06. Then I had to enable the linked pin too, because otherwise I didn't have any sound. The pin connected to the digital out 0x10 is 0x11 (the one connected to 0x06 is 0x1e). So in the end, I'm able to have HDMI sound! Now here are my questions: - how can I add this with SND_PCI_QUIRK? I think that I have to find the IDs of my setup (PCI ID?) and then create a preset. How can I find this ID on my system? There is a dig_out_nid field in the preset so I would use 0x10 instead of ALC262_DIGOUT_NID (0x06). I don't know how to change the pin from 0x1e to 0x11, is it automatic? - doing this will disable my S/PDIF output, is it possible to juste have both outputs available? Thanks! -- Damien Thebault

2 2

[alsa-devel] Issues with ATI IXP SB4x0
by Simos Xenitellis 30 Jul '10

30 Jul '10

An Acer laptop with the ATI IXP SB4x0 chipset fails to detect the audio card. Here is the alsa-info file with latest Alsa, http://www.alsa-project.org/db/?f=b63339af32dd301eba9f5ef6a0787ccfbeb55778 What should be the next thing to try in order to solve this issue? The "Conexant ID 2c06" string in the file appears to refer to the modem (?). Googling with the subsystem ID '1025:009f only brings cases where the sound does not work. Any suggestions on where to look at? Simos

2 1

[alsa-devel] Fixing ALC269 the right way?
by David Henningsson 30 Jul '10

30 Jul '10

Here's what I try to fix by playing around with it in hda-emu, it seems like more than one thing is broken here, but let's start with playback. This machine has one internal speaker and one line-out. Codec proc file is attached. Here's my analysis so far: 1) If there's one internal speaker and one line-out (rather than headphone-out), should the internal speaker auto-mute? What's standard practice? 2) There are two DAC nids, 0x02 and 0x03, but only 0x02 is used (i e activated on playback). But line-out is connected (via nid 0x0d) to DAC 0x03, so there is no sound on line-out. Should we try to activate DAC nid 0x03 or try to move line-out to DAC 0x02? And is either possible through just fiddling with pin_configs (which Takashi preferred), or should we add fixup verbs, or a completely new model? What would upstream prefer in this case? 3) Another strange thing is the controls, there is both Master Playback and Speaker Playback Volumes and Switches, but they both control Volume=0x02 and Switch=0x14, and setting one then getting the other returns the wrong result since they're not updating each other's cached values (I assume). So we should try to get rid of one of these, but how depends on the answer to question 1... Thanks in advance for helping out! -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 3

[PATCH 5/5] Add analog output NIDs used by Dell Optiplex
by David Henningsson 30 Jul '10

30 Jul '10

This patch enables playback on Dell Optiplex XE, 380 and 980. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b4b7f58..0b87715 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -13108,6 +13108,8 @@ static int alc268_new_analog_output(struct alc_spec *spec, hda_nid_t nid, dac = 0x02; break; case 0x15: + case 0x1a: + case 0x1b: case 0x21: /* ALC269vb has this pin, too */ dac = 0x03; break; -- 1.7.0.4 --------------040609020801060909050209--

1 0

[alsa-devel] PROPOSAL: Layer Signal Processing Architecture
by Ilya D 30 Jul '10

30 Jul '10

Hello. I have a proposal for this Layered Model, which would allow implementation of new audio interfaces with DSP cores, with cross-platform compatibility and audio networking in mind. it would be a sort of OSI for signal processing, but with some extra stuff to it, such as a common language (library) for hardware programming. it's not to replace ALSA, but just to bring a different approach for design engineers of professional audio applications. we all know that these days a lot manufactuares chose Linux for their Mixing Consoles (such as Midas, Lawo, Calrec and others), also other products use Linux, but there might be only a few who use ALSA (as far as i could find out there rather NONE in pro-audio Linux devices). Linux runs on devices such as Blackfin and OMAP, which have DSP cores, but the interface is device-specific, hence low-level. ALSA had been designed for conventional sound-cards (largely) also there drivers for RME, DigiGram and other pro-interfaces, but the hardware is still proprietary and it isn't quite flexible. The idea is to bring new concepts to the world, well not 100% new, but new in a way. One of these would be to implement an "open-source" audio processor interface of a kind. It would have configurable channel strips with (multi-band EQ and dynamics). Another motivating factor is upcomming completition of AVB ethernet standard from IETF/IEEE, there had been no publicaly avaliable code for this, nor i could find any discussions of how it could be implemented in Linux. However i have contact with a professor Richard Foss from Rhodes University, and there they have implemented a library and packet generator for AVB, though they haven't yet published this code. There also hasn't heppend any wide adoption of OSC, and may be OSC is not that great? I am currently working on "Control and Monitoring Protocol" which could take part in this architercture on it's TOP Layer. The fallowing are the ABSTRACTION layers that i have thought being most general: ~>> Control, Monitoring and Information (CMI) ACMP (above mentioned above, it's kind of OSC-based) or AES-x170 (both can fit together) also OSC ..or even MIDI but ACMP is more general, it should be good for lighting and other controll applications .. here is the place for GUI interfaces, hardware controllers, control surfaces ...etc ~>> Signal Processing Subsystem (SPS) ~>> Core Signal Bus (CSB) : our inter-connect it has one common clock one or more control ports and one or more signal ports (a port can be input, output, or both) the control ports are exposed to CMI layer the signal prorts can be: bridged (over Ethernet (i.e. AVB), USB or FireWire) interfaced (to say I2S, AES/EBU, AES-50 ..MADI, ADAT) or streamed to a codec or uncompressed file dumping Let's call it an Port Exposure Layer ~>> Core Signal Elements (CSE) the main abstraction for this is library (our cross-platform API) compiler (to produce platform dependent code) interpreter (to configure and glue the blocks) ~>> General Purpose Operating System Of course it is still there ..it could be on a remote machine or anything ..and it could be everywhere around, even General Purpose CPU could be a fall-back option ..well, this is all about abstraction after all :) This is with parallel audio clustering applications and distributed chain processing in mind. Looking forward to here some discussion, I would like to set up a wiki and discusion list for this! Regards, -- Ilya Dmitrichenko Илья Дмитриченко email: errordeveloper(a)gmail.com

3 3

[alsa-devel] Equalizer plugin
by John Lindgren 29 Jul '10

29 Jul '10

Hi, I know at present it is possible to set up a system-wide equalizer by using a LADSPA effect configured in .asoundrc, but (to my knowledge) adjusting such a setup requires editing .asoundrc and then restarting all applications using ALSA. I've cooked up an external PCM plugin that uses its own config file to store equalizer settings. Since it watches the config file with inotify, it is possible to change the settings without restarting any applications. I plan to eventually write a GUI for it. So ... is this useful? Any suggestions? -- John

1 0

[alsa-devel] Driver for AK4555 codec
by Yoran Brondsema 29 Jul '10

29 Jul '10

Hi, For a system here at work, we have a simple audio system consisting of an I2S-bus audio controller embedded in the CPU (an NXP LPC3250) and a AK4555 codec which communicates with the CPU through the I2S-bus and produces (or captures) analog signals. The codec is extremely simple; it is basically an A/D & D/A converter and it doesn't support a control interface such as I2C. There is a driver available for the LPC3250 but none for the AK4555 codec, so I have to write it myself. I checked the document "Writing an ALSA Driver" by Takashi Iwai but it seems to focus on full-featured sound cards; I'm just dealing with a "simple" codec. I checked at the code of the uda1380 in linux/sound/soc/lpc3xxx/lpc3xxx-uda1380.c and it seems to be calling some functions like platform_device_alloc, platform_set_drvdata,... but I can't find the documentation of what these functions do. Can someone give me some pointers to some documentation or some rough idea of how it needs to be done? Thank you, Yoran

2 1

[alsa-devel] ASoC updates for 2.6.36
by Mark Brown 29 Jul '10

29 Jul '10

The following changes since commit a7e7cd5bd7d1e0134032b8db5e64ceb9dac8b3ca: ASoC: da7210: Add HeadPhone Playback Volume control (2010-07-23 10:17:47 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.36 Kuninori Morimoto (3): ASoC: fsi: remove unnecessary clock processing ASoC: fsi: remove device id check ASoC: fsi: Add new funtion for SPDIF include/sound/sh_fsi.h | 2 + sound/soc/sh/fsi.c | 70 +++++++++++++++++++++++++++++++++++++---------- 2 files changed, 57 insertions(+), 15 deletions(-)

2 1

[alsa-devel] [PATCH 2/2] ARM: S5PV210: Add the GPIO lib
by Chanwoo Choi 29 Jul '10

29 Jul '10

This patch add the definition of GPIO to support WM8994 audio codec on I2C bus. Signed-off-by : Chanwoo Choi <cw00.choi(a)samsung.com> Signed-off-by : Kyungmin Park <kyungmin.park(a)samsung.com> --- arch/arm/mach-s5pv210/include/mach/gpio.h | 10 ++++++++-- 1 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index d6461ba..33a9867 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -52,6 +52,8 @@ #define S5PV210_GPIO_MP01_NR (8) #define S5PV210_GPIO_MP02_NR (4) #define S5PV210_GPIO_MP03_NR (8) +#define S5PV210_GPIO_MP04_NR (8) +#define S5PV210_GPIO_MP05_NR (8) /* GPIO bank numbers */ @@ -94,6 +96,8 @@ enum s5p_gpio_number { S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4), S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01), S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02), + S5PV210_GPIO_MP04_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03), + S5PV210_GPIO_MP05_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04), }; /* S5PV210 GPIO number definitions */ @@ -127,13 +131,15 @@ enum s5p_gpio_number { #define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr)) #define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr)) #define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr)) +#define S5PV210_MP04(_nr) (S5PV210_GPIO_MP04_START + (_nr)) +#define S5PV210_MP05(_nr) (S5PV210_GPIO_MP05_START + (_nr)) /* the end of the S5PV210 specific gpios */ -#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1) +#define S5PV210_GPIO_END (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1) #define S3C_GPIO_END S5PV210_GPIO_END /* define the number of gpios we need to the one after the MP03() range */ -#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \ +#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) #include <asm-generic/gpio.h>

2 1

[alsa-devel] [PATCH 0/3] ASoC: fsi: SPDIF support
by Kuninori Morimoto 29 Jul '10

29 Jul '10

Dear Mark, Liam These are FSI driver patches Kuninori Morimoto (3): ASoC: fsi: remove unnecessary clock processing ASoC: fsi: remove device id check ASoC: fsi: Add new funtion for SPDIF These patches are based on Mark's "for-2.6.36" tree. These are needed for FSI2 device and HDMI support. Best regards -- Kuninori Morimoto

3 6

[alsa-devel] acer aspire 8943g with alc670
by Miroslav Šulc 29 Jul '10

29 Jul '10

hello, i'd like to help with making the above soundcard to fully work, but have no clue what to do exactly. currently the soundcard works pretty weird, though at least sound goes out :-) i tried hda analyzer but did not find any documentation for it so have no idea what to do exactly. also, when clicking AUD_IN nodes, i get this error: ** (hda_analyzer.py:10063): WARNING **: column number is a boolean, but will be interpreted as an integer; this is likely not what you intended Traceback (most recent call last): File "/dev/shm/hda-analyzer/hda_analyzer.py", line 308, in selection_changed_cb self.__refresh() File "/dev/shm/hda-analyzer/hda_analyzer.py", line 276, in __refresh self.load() File "/dev/shm/hda-analyzer/hda_analyzer.py", line 336, in load self.node_window.add(NodeGui(node=n)) File "/dev/shm/hda-analyzer/hda_guilib.py", line 86, in __init__ self.__build_node(node, doframe) File "/dev/shm/hda-analyzer/hda_guilib.py", line 682, in __build_node vbox.pack_start(self.__build_amps(node), False, False) File "/dev/shm/hda-analyzer/hda_guilib.py", line 365, in __build_amps node.in_amp and node.amp_vals_in or None) File "/dev/shm/hda-analyzer/hda_guilib.py", line 328, in build_caps if ctl.hdactl.amp_index_match(idx): File "/dev/shm/hda-analyzer/hda_proc.py", line 170, in amp_index_match count = (self.amp_chs & 1) + ((self.amp_chs >> 1) & 1) TypeError: unsupported operand type(s) for &: 'NoneType' and 'int' can anybody pls direct me to some documentation that could help me to master hda analyzer and find the way to make the card work correctly? miroslav

3 7

[alsa-devel] mmotm 2010-07-27 - hda-intel audio fails to initialize
by Valdis.Kletnieks＠vt.edu 29 Jul '10

29 Jul '10

On Tue, 27 Jul 2010 14:56:50 PDT, akpm(a)linux-foundation.org said: > The mm-of-the-moment snapshot 2010-07-27-14-56 has been uploaded to > > http://userweb.kernel.org/~akpm/mmotm/ Dell Latitude E6500. Soundcard has gone astray, it appears. _From 2.6.35-rc3-mmotm0719 dmesg: [ 3.372928] usbcore: registered new interface driver usbhid [ 3.372931] usbhid: USB HID core driver [ 3.395281] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 3.396477] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.433604] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 3.433922] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 3.434402] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 3.434668] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 3.435552] ALSA device list: [ 3.435554] #0: HDA Intel at 0xf6fdc000 irq 48 [ 3.435588] Netfilter messages via NETLINK v0.30. [ 3.435608] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) _From 2.6.35-rc6-mmotm0727: [ 3.065797] usbcore: registered new interface driver usbhid [ 3.065800] usbhid: USB HID core driver [ 3.085379] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 3.086706] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.086788] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 3.086841] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 3.095165] ALSA sound/pci/hda/hda_intel.c:1450: no codecs initialized [ 3.095492] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 3.095640] ALSA device list: [ 3.095642] No soundcards found. [ 3.095676] Netfilter messages via NETLINK v0.30. Am I hitting a known issue? If not, what other info would help?

2 2

[alsa-devel] [PATCH] Two patches for Alsa-plugins (pulse)
by David Henningsson 29 Jul '10

29 Jul '10

These two patches are being used in Ubuntu Lucid (released this April) and are working well enough to have people asking us to backport them to Karmic. Today I got an email, asking for the upstream status of one of these patches, since he wanted them in Fedora. If posting them here isn't the correct way to upstream them, please tell me so. The first one (Fix invalid buffer pointer return value) fixes broken logic: This patch improves recovering from underruns, and prevents hangs inside snd_pcm_write* and snd_pcm_read* due to snd_pcm_avail* returning too low values. It especially helps low latency situations. The second one (Do not report underruns to the ALSA layer) is more a change of behavior, which could be questioned. The arguments for removing that code are these: * If pulseaudio gets an underrun, the normal way to end that underrun is to feed it with more buffers. This is different from the ALSA way of dealing with underruns, which requires hardware buffer pointers to be reset. * In addition, underrun signals are delivered asynchronously from pulseaudio. This means that there might be more buffers on the way to pulseaudio when the underrun is reported, making the underrun obsolete. Unfortunately, there is currently no known way to determine whether this is the case or not. // David

5 20

[alsa-devel] [PATCH] Rename iMic to Int Mic on Lenovo NB0763
by David Henningsson 29 Jul '10

29 Jul '10

The non-standard name "iMic" makes PulseAudio ignore the microphone. BugLink: https://launchpad.net/bugs/605101 -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 3