- Alsa-devel - mailman.alsa-project.org

[alsa-devel] Blackfin ASoC drivers with multi-component
by Mark Brown 29 Nov '10

29 Nov '10

I'm a little concerned that there have been no updates to the Blackfin audio drivers since the merge of multi-component ASoC (which is now in mainline and should be released as part of 2.6.37). This was a very big and invasive update, and experience with other architectures has been that there's usually at least some typos that need fixing. It'd be good to get some confirmation that the audio drivers have at least been tested with current mainline - if everything worked fine that's obviously excellent but it'd be good if someone could confirm that this is the case. There was some discussion with Mike at the time the drivers were merged but it sounded more like "I need to get the audio guys to look at this" than a report of actual testing and there's been nothing since.

2 1

[alsa-devel] bug in alsa-lib/snd_pcm_plugin_delay for capture?
by pl bossart 27 Nov '10

27 Nov '10

Since the PulseAudio commit 29acfd0e0413a9bd126782763ee2dcf10357546 I am seeing errors messages telling me that the information reported by snd_pcm_avail_delay is not accurate on the capture path, more specifically the delay is lower than the available samples. I spent a little bit of time to find the root cause, and I believe this is a problem with alsa-lib plugins. I never see any errors when using hw devices. Conversely I always have these errors when using the front: plugin (the pulseaudio default). When I looked at the code, I saw that snd_pcm_plugin_delay and snd_pcm_plugin_avail_update don't really match. There is additional code in snd_pcm_plugin_avail_update for the capture case that is not present when in the delay code, and that causes the delta between the values reported. Since I don't understand this code that has all kinds of mmap_commit/forward/undos, I have to ask higher powers for advice. Jaroslav, could you take a look at the code and let me know if my analysis is correct? Thanks, -Pierre

4 9

[alsa-devel] Xonar DS
by Thomas 27 Nov '10

27 Nov '10

Hello everyone, (Sorry about the double post between user and devel. But I realized I might actually get the answer in the dev because they maintain the page and the development of drivers) I have an interest in purchasing Asus Xonar DS but I stumbled on this "No headphone plug event detection yet." from http://www.alsa- project.org/main/index.php/Matrix:Vendor-Asus. I'm not exactly sure what the above means. Does it mean headphone cannot be detected if we were to plug them in? Headphone means a lot to me and if it cannot be detected, I would need to purchase something else. Thank you very much

1 0

[alsa-devel] poor sound from ALC 850/880 in alsa 1.0.21 and 1.0.23
by Colin Kincaid Williams 27 Nov '10

27 Nov '10

Hello, I'm experiencing crap sound preformance from my ALC 850/880 chipset. I'm first wondering if their is a way to set the model other than the /etc/modprobe.d/alsa-base.conf file? Can I try different models without rebooting? So far I've tried the model 6stack, since that sounds like what I have on my motherboard. Furthermore, does anybody have any ideas on what else I can do so that my computer can sound at least as good as my $20 coby mp3 player? I've tried both driver version 1.0.21 and more recently 1.0.23, with no improvment in sound. cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.23. Compiled on Nov 26 2010 for kernel 2.6.32-5-amd64 (SMP). cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.21. The output from lspci : 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2) =A0 =A0 =A0 =A0Subsystem: Giga-byte Technology Device [1458:a102] =A0 =A0 =A0 =A0Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop= - ParErr- Stepping- SERR- FastB2B- DisINTx- =A0 =A0 =A0 =A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >T= Abort- <TAbort- <MAbort- >SERR- <PERR- INTx- =A0 =A0 =A0 =A0Latency: 0 (500ns min, 1250ns max) =A0 =A0 =A0 =A0Interrupt: pin B routed to IRQ 22 =A0 =A0 =A0 =A0Region 0: Memory at f5100000 (32-bit, non-prefetchable) [s= ize=3D16K] =A0 =A0 =A0 =A0Capabilities: [44] Power Management version 2 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0= mA PME(D0-,D1-,D2-,D3hot+,D3cold+) =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0Status: D0 NoSoftRst- PME-Enable- DSel=3D0= DScale=3D0 PME- =A0 =A0 =A0 =A0Capabilities: [50] MSI: Enable- Count=3D1/1 Maskable+ 64bi= t+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0Address: 0000000000000000 =A0Data: 0000 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0Masking: 00000000 =A0Pending: 00000000 =A0 =A0 =A0 =A0Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fix= ed+ =A0 =A0 =A0 =A0Kernel driver in use: HDA Intel

1 0

[alsa-devel] [PATCH 1/4] ASoC: Convert WM8994 to use soc-cache.c cache functions
by Mark Brown 26 Nov '10

26 Nov '10

In the process we convert the driver to read registers one at a time when initialising the cache. This has the effect of working around limitations in the sizes of I2C transactions which can be done by some CPUs. Due to the sparseness of the register map the overhead from this should be minimual unless I2C transactions are very expensive to start. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994-tables.c | 1572 ++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8994.c | 95 ++-- sound/soc/codecs/wm8994.h | 1 + 3 files changed, 1620 insertions(+), 48 deletions(-) diff --git a/sound/soc/codecs/wm8994-tables.c b/sound/soc/codecs/wm8994-tables.c index 7b93538..68e9b02 100644 --- a/sound/soc/codecs/wm8994-tables.c +++ b/sound/soc/codecs/wm8994-tables.c @@ -1573,3 +1573,1575 @@ const struct wm8994_access_mask wm8994_access_masks[WM8994_CACHE_SIZE] = { { 0x03C3, 0x03C3 }, /* R1569 - Sidetone */ }; +const __devinitdata u16 wm8994_reg_defaults[WM8994_CACHE_SIZE] = { + 0x8994, /* R0 - Software Reset */ + 0x0000, /* R1 - Power Management (1) */ + 0x6000, /* R2 - Power Management (2) */ + 0x0000, /* R3 - Power Management (3) */ + 0x0000, /* R4 - Power Management (4) */ + 0x0000, /* R5 - Power Management (5) */ + 0x0000, /* R6 - Power Management (6) */ + 0x0000, /* R7 */ + 0x0000, /* R8 */ + 0x0000, /* R9 */ + 0x0000, /* R10 */ + 0x0000, /* R11 */ + 0x0000, /* R12 */ + 0x0000, /* R13 */ + 0x0000, /* R14 */ + 0x0000, /* R15 */ + 0x0000, /* R16 */ + 0x0000, /* R17 */ + 0x0000, /* R18 */ + 0x0000, /* R19 */ + 0x0000, /* R20 */ + 0x0000, /* R21 - Input Mixer (1) */ + 0x0000, /* R22 */ + 0x0000, /* R23 */ + 0x008B, /* R24 - Left Line Input 1&2 Volume */ + 0x008B, /* R25 - Left Line Input 3&4 Volume */ + 0x008B, /* R26 - Right Line Input 1&2 Volume */ + 0x008B, /* R27 - Right Line Input 3&4 Volume */ + 0x006D, /* R28 - Left Output Volume */ + 0x006D, /* R29 - Right Output Volume */ + 0x0066, /* R30 - Line Outputs Volume */ + 0x0020, /* R31 - HPOUT2 Volume */ + 0x0079, /* R32 - Left OPGA Volume */ + 0x0079, /* R33 - Right OPGA Volume */ + 0x0003, /* R34 - SPKMIXL Attenuation */ + 0x0003, /* R35 - SPKMIXR Attenuation */ + 0x0011, /* R36 - SPKOUT Mixers */ + 0x0140, /* R37 - ClassD */ + 0x0079, /* R38 - Speaker Volume Left */ + 0x0079, /* R39 - Speaker Volume Right */ + 0x0000, /* R40 - Input Mixer (2) */ + 0x0000, /* R41 - Input Mixer (3) */ + 0x0000, /* R42 - Input Mixer (4) */ + 0x0000, /* R43 - Input Mixer (5) */ + 0x0000, /* R44 - Input Mixer (6) */ + 0x0000, /* R45 - Output Mixer (1) */ + 0x0000, /* R46 - Output Mixer (2) */ + 0x0000, /* R47 - Output Mixer (3) */ + 0x0000, /* R48 - Output Mixer (4) */ + 0x0000, /* R49 - Output Mixer (5) */ + 0x0000, /* R50 - Output Mixer (6) */ + 0x0000, /* R51 - HPOUT2 Mixer */ + 0x0000, /* R52 - Line Mixer (1) */ + 0x0000, /* R53 - Line Mixer (2) */ + 0x0000, /* R54 - Speaker Mixer */ + 0x0000, /* R55 - Additional Control */ + 0x0000, /* R56 - AntiPOP (1) */ + 0x0000, /* R57 - AntiPOP (2) */ + 0x0000, /* R58 - MICBIAS */ + 0x000D, /* R59 - LDO 1 */ + 0x0003, /* R60 - LDO 2 */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x0000, /* R64 */ + 0x0000, /* R65 */ + 0x0000, /* R66 */ + 0x0000, /* R67 */ + 0x0000, /* R68 */ + 0x0000, /* R69 */ + 0x0000, /* R70 */ + 0x0000, /* R71 */ + 0x0000, /* R72 */ + 0x0000, /* R73 */ + 0x0000, /* R74 */ + 0x0000, /* R75 */ + 0x1F25, /* R76 - Charge Pump (1) */ + 0x0000, /* R77 */ + 0x0000, /* R78 */ + 0x0000, /* R79 */ + 0x0000, /* R80 */ + 0x0004, /* R81 - Class W (1) */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 - DC Servo (1) */ + 0x054A, /* R85 - DC Servo (2) */ + 0x0000, /* R86 */ + 0x0000, /* R87 - DC Servo (4) */ + 0x0000, /* R88 - DC Servo Readback */ + 0x0000, /* R89 */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 */ + 0x0000, /* R93 */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Analogue HP (1) */ + 0x0000, /* R97 */ + 0x0000, /* R98 */ + 0x0000, /* R99 */ + 0x0000, /* R100 */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x0000, /* R104 */ + 0x0000, /* R105 */ + 0x0000, /* R106 */ + 0x0000, /* R107 */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 */ + 0x0000, /* R112 */ + 0x0000, /* R113 */ + 0x0000, /* R114 */ + 0x0000, /* R115 */ + 0x0000, /* R116 */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x0000, /* R128 */ + 0x0000, /* R129 */ + 0x0000, /* R130 */ + 0x0000, /* R131 */ + 0x0000, /* R132 */ + 0x0000, /* R133 */ + 0x0000, /* R134 */ + 0x0000, /* R135 */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0000, /* R140 */ + 0x0000, /* R141 */ + 0x0000, /* R142 */ + 0x0000, /* R143 */ + 0x0000, /* R144 */ + 0x0000, /* R145 */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x0000, /* R152 */ + 0x0000, /* R153 */ + 0x0000, /* R154 */ + 0x0000, /* R155 */ + 0x0000, /* R156 */ + 0x0000, /* R157 */ + 0x0000, /* R158 */ + 0x0000, /* R159 */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 */ + 0x0000, /* R164 */ + 0x0000, /* R165 */ + 0x0000, /* R166 */ + 0x0000, /* R167 */ + 0x0000, /* R168 */ + 0x0000, /* R169 */ + 0x0000, /* R170 */ + 0x0000, /* R171 */ + 0x0000, /* R172 */ + 0x0000, /* R173 */ + 0x0000, /* R174 */ + 0x0000, /* R175 */ + 0x0000, /* R176 */ + 0x0000, /* R177 */ + 0x0000, /* R178 */ + 0x0000, /* R179 */ + 0x0000, /* R180 */ + 0x0000, /* R181 */ + 0x0000, /* R182 */ + 0x0000, /* R183 */ + 0x0000, /* R184 */ + 0x0000, /* R185 */ + 0x0000, /* R186 */ + 0x0000, /* R187 */ + 0x0000, /* R188 */ + 0x0000, /* R189 */ + 0x0000, /* R190 */ + 0x0000, /* R191 */ + 0x0000, /* R192 */ + 0x0000, /* R193 */ + 0x0000, /* R194 */ + 0x0000, /* R195 */ + 0x0000, /* R196 */ + 0x0000, /* R197 */ + 0x0000, /* R198 */ + 0x0000, /* R199 */ + 0x0000, /* R200 */ + 0x0000, /* R201 */ + 0x0000, /* R202 */ + 0x0000, /* R203 */ + 0x0000, /* R204 */ + 0x0000, /* R205 */ + 0x0000, /* R206 */ + 0x0000, /* R207 */ + 0x0000, /* R208 */ + 0x0000, /* R209 */ + 0x0000, /* R210 */ + 0x0000, /* R211 */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 */ + 0x0000, /* R216 */ + 0x0000, /* R217 */ + 0x0000, /* R218 */ + 0x0000, /* R219 */ + 0x0000, /* R220 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 */ + 0x0000, /* R225 */ + 0x0000, /* R226 */ + 0x0000, /* R227 */ + 0x0000, /* R228 */ + 0x0000, /* R229 */ + 0x0000, /* R230 */ + 0x0000, /* R231 */ + 0x0000, /* R232 */ + 0x0000, /* R233 */ + 0x0000, /* R234 */ + 0x0000, /* R235 */ + 0x0000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0000, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0000, /* R243 */ + 0x0000, /* R244 */ + 0x0000, /* R245 */ + 0x0000, /* R246 */ + 0x0000, /* R247 */ + 0x0000, /* R248 */ + 0x0000, /* R249 */ + 0x0000, /* R250 */ + 0x0000, /* R251 */ + 0x0000, /* R252 */ + 0x0000, /* R253 */ + 0x0000, /* R254 */ + 0x0000, /* R255 */ + 0x0003, /* R256 - Chip Revision */ + 0x8004, /* R257 - Control Interface */ + 0x0000, /* R258 */ + 0x0000, /* R259 */ + 0x0000, /* R260 */ + 0x0000, /* R261 */ + 0x0000, /* R262 */ + 0x0000, /* R263 */ + 0x0000, /* R264 */ + 0x0000, /* R265 */ + 0x0000, /* R266 */ + 0x0000, /* R267 */ + 0x0000, /* R268 */ + 0x0000, /* R269 */ + 0x0000, /* R270 */ + 0x0000, /* R271 */ + 0x0000, /* R272 - Write Sequencer Ctrl (1) */ + 0x0000, /* R273 - Write Sequencer Ctrl (2) */ + 0x0000, /* R274 */ + 0x0000, /* R275 */ + 0x0000, /* R276 */ + 0x0000, /* R277 */ + 0x0000, /* R278 */ + 0x0000, /* R279 */ + 0x0000, /* R280 */ + 0x0000, /* R281 */ + 0x0000, /* R282 */ + 0x0000, /* R283 */ + 0x0000, /* R284 */ + 0x0000, /* R285 */ + 0x0000, /* R286 */ + 0x0000, /* R287 */ + 0x0000, /* R288 */ + 0x0000, /* R289 */ + 0x0000, /* R290 */ + 0x0000, /* R291 */ + 0x0000, /* R292 */ + 0x0000, /* R293 */ + 0x0000, /* R294 */ + 0x0000, /* R295 */ + 0x0000, /* R296 */ + 0x0000, /* R297 */ + 0x0000, /* R298 */ + 0x0000, /* R299 */ + 0x0000, /* R300 */ + 0x0000, /* R301 */ + 0x0000, /* R302 */ + 0x0000, /* R303 */ + 0x0000, /* R304 */ + 0x0000, /* R305 */ + 0x0000, /* R306 */ + 0x0000, /* R307 */ + 0x0000, /* R308 */ + 0x0000, /* R309 */ + 0x0000, /* R310 */ + 0x0000, /* R311 */ + 0x0000, /* R312 */ + 0x0000, /* R313 */ + 0x0000, /* R314 */ + 0x0000, /* R315 */ + 0x0000, /* R316 */ + 0x0000, /* R317 */ + 0x0000, /* R318 */ + 0x0000, /* R319 */ + 0x0000, /* R320 */ + 0x0000, /* R321 */ + 0x0000, /* R322 */ + 0x0000, /* R323 */ + 0x0000, /* R324 */ + 0x0000, /* R325 */ + 0x0000, /* R326 */ + 0x0000, /* R327 */ + 0x0000, /* R328 */ + 0x0000, /* R329 */ + 0x0000, /* R330 */ + 0x0000, /* R331 */ + 0x0000, /* R332 */ + 0x0000, /* R333 */ + 0x0000, /* R334 */ + 0x0000, /* R335 */ + 0x0000, /* R336 */ + 0x0000, /* R337 */ + 0x0000, /* R338 */ + 0x0000, /* R339 */ + 0x0000, /* R340 */ + 0x0000, /* R341 */ + 0x0000, /* R342 */ + 0x0000, /* R343 */ + 0x0000, /* R344 */ + 0x0000, /* R345 */ + 0x0000, /* R346 */ + 0x0000, /* R347 */ + 0x0000, /* R348 */ + 0x0000, /* R349 */ + 0x0000, /* R350 */ + 0x0000, /* R351 */ + 0x0000, /* R352 */ + 0x0000, /* R353 */ + 0x0000, /* R354 */ + 0x0000, /* R355 */ + 0x0000, /* R356 */ + 0x0000, /* R357 */ + 0x0000, /* R358 */ + 0x0000, /* R359 */ + 0x0000, /* R360 */ + 0x0000, /* R361 */ + 0x0000, /* R362 */ + 0x0000, /* R363 */ + 0x0000, /* R364 */ + 0x0000, /* R365 */ + 0x0000, /* R366 */ + 0x0000, /* R367 */ + 0x0000, /* R368 */ + 0x0000, /* R369 */ + 0x0000, /* R370 */ + 0x0000, /* R371 */ + 0x0000, /* R372 */ + 0x0000, /* R373 */ + 0x0000, /* R374 */ + 0x0000, /* R375 */ + 0x0000, /* R376 */ + 0x0000, /* R377 */ + 0x0000, /* R378 */ + 0x0000, /* R379 */ + 0x0000, /* R380 */ + 0x0000, /* R381 */ + 0x0000, /* R382 */ + 0x0000, /* R383 */ + 0x0000, /* R384 */ + 0x0000, /* R385 */ + 0x0000, /* R386 */ + 0x0000, /* R387 */ + 0x0000, /* R388 */ + 0x0000, /* R389 */ + 0x0000, /* R390 */ + 0x0000, /* R391 */ + 0x0000, /* R392 */ + 0x0000, /* R393 */ + 0x0000, /* R394 */ + 0x0000, /* R395 */ + 0x0000, /* R396 */ + 0x0000, /* R397 */ + 0x0000, /* R398 */ + 0x0000, /* R399 */ + 0x0000, /* R400 */ + 0x0000, /* R401 */ + 0x0000, /* R402 */ + 0x0000, /* R403 */ + 0x0000, /* R404 */ + 0x0000, /* R405 */ + 0x0000, /* R406 */ + 0x0000, /* R407 */ + 0x0000, /* R408 */ + 0x0000, /* R409 */ + 0x0000, /* R410 */ + 0x0000, /* R411 */ + 0x0000, /* R412 */ + 0x0000, /* R413 */ + 0x0000, /* R414 */ + 0x0000, /* R415 */ + 0x0000, /* R416 */ + 0x0000, /* R417 */ + 0x0000, /* R418 */ + 0x0000, /* R419 */ + 0x0000, /* R420 */ + 0x0000, /* R421 */ + 0x0000, /* R422 */ + 0x0000, /* R423 */ + 0x0000, /* R424 */ + 0x0000, /* R425 */ + 0x0000, /* R426 */ + 0x0000, /* R427 */ + 0x0000, /* R428 */ + 0x0000, /* R429 */ + 0x0000, /* R430 */ + 0x0000, /* R431 */ + 0x0000, /* R432 */ + 0x0000, /* R433 */ + 0x0000, /* R434 */ + 0x0000, /* R435 */ + 0x0000, /* R436 */ + 0x0000, /* R437 */ + 0x0000, /* R438 */ + 0x0000, /* R439 */ + 0x0000, /* R440 */ + 0x0000, /* R441 */ + 0x0000, /* R442 */ + 0x0000, /* R443 */ + 0x0000, /* R444 */ + 0x0000, /* R445 */ + 0x0000, /* R446 */ + 0x0000, /* R447 */ + 0x0000, /* R448 */ + 0x0000, /* R449 */ + 0x0000, /* R450 */ + 0x0000, /* R451 */ + 0x0000, /* R452 */ + 0x0000, /* R453 */ + 0x0000, /* R454 */ + 0x0000, /* R455 */ + 0x0000, /* R456 */ + 0x0000, /* R457 */ + 0x0000, /* R458 */ + 0x0000, /* R459 */ + 0x0000, /* R460 */ + 0x0000, /* R461 */ + 0x0000, /* R462 */ + 0x0000, /* R463 */ + 0x0000, /* R464 */ + 0x0000, /* R465 */ + 0x0000, /* R466 */ + 0x0000, /* R467 */ + 0x0000, /* R468 */ + 0x0000, /* R469 */ + 0x0000, /* R470 */ + 0x0000, /* R471 */ + 0x0000, /* R472 */ + 0x0000, /* R473 */ + 0x0000, /* R474 */ + 0x0000, /* R475 */ + 0x0000, /* R476 */ + 0x0000, /* R477 */ + 0x0000, /* R478 */ + 0x0000, /* R479 */ + 0x0000, /* R480 */ + 0x0000, /* R481 */ + 0x0000, /* R482 */ + 0x0000, /* R483 */ + 0x0000, /* R484 */ + 0x0000, /* R485 */ + 0x0000, /* R486 */ + 0x0000, /* R487 */ + 0x0000, /* R488 */ + 0x0000, /* R489 */ + 0x0000, /* R490 */ + 0x0000, /* R491 */ + 0x0000, /* R492 */ + 0x0000, /* R493 */ + 0x0000, /* R494 */ + 0x0000, /* R495 */ + 0x0000, /* R496 */ + 0x0000, /* R497 */ + 0x0000, /* R498 */ + 0x0000, /* R499 */ + 0x0000, /* R500 */ + 0x0000, /* R501 */ + 0x0000, /* R502 */ + 0x0000, /* R503 */ + 0x0000, /* R504 */ + 0x0000, /* R505 */ + 0x0000, /* R506 */ + 0x0000, /* R507 */ + 0x0000, /* R508 */ + 0x0000, /* R509 */ + 0x0000, /* R510 */ + 0x0000, /* R511 */ + 0x0000, /* R512 - AIF1 Clocking (1) */ + 0x0000, /* R513 - AIF1 Clocking (2) */ + 0x0000, /* R514 */ + 0x0000, /* R515 */ + 0x0000, /* R516 - AIF2 Clocking (1) */ + 0x0000, /* R517 - AIF2 Clocking (2) */ + 0x0000, /* R518 */ + 0x0000, /* R519 */ + 0x0000, /* R520 - Clocking (1) */ + 0x0000, /* R521 - Clocking (2) */ + 0x0000, /* R522 */ + 0x0000, /* R523 */ + 0x0000, /* R524 */ + 0x0000, /* R525 */ + 0x0000, /* R526 */ + 0x0000, /* R527 */ + 0x0083, /* R528 - AIF1 Rate */ + 0x0083, /* R529 - AIF2 Rate */ + 0x0000, /* R530 - Rate Status */ + 0x0000, /* R531 */ + 0x0000, /* R532 */ + 0x0000, /* R533 */ + 0x0000, /* R534 */ + 0x0000, /* R535 */ + 0x0000, /* R536 */ + 0x0000, /* R537 */ + 0x0000, /* R538 */ + 0x0000, /* R539 */ + 0x0000, /* R540 */ + 0x0000, /* R541 */ + 0x0000, /* R542 */ + 0x0000, /* R543 */ + 0x0000, /* R544 - FLL1 Control (1) */ + 0x0000, /* R545 - FLL1 Control (2) */ + 0x0000, /* R546 - FLL1 Control (3) */ + 0x0000, /* R547 - FLL1 Control (4) */ + 0x0C80, /* R548 - FLL1 Control (5) */ + 0x0000, /* R549 */ + 0x0000, /* R550 */ + 0x0000, /* R551 */ + 0x0000, /* R552 */ + 0x0000, /* R553 */ + 0x0000, /* R554 */ + 0x0000, /* R555 */ + 0x0000, /* R556 */ + 0x0000, /* R557 */ + 0x0000, /* R558 */ + 0x0000, /* R559 */ + 0x0000, /* R560 */ + 0x0000, /* R561 */ + 0x0000, /* R562 */ + 0x0000, /* R563 */ + 0x0000, /* R564 */ + 0x0000, /* R565 */ + 0x0000, /* R566 */ + 0x0000, /* R567 */ + 0x0000, /* R568 */ + 0x0000, /* R569 */ + 0x0000, /* R570 */ + 0x0000, /* R571 */ + 0x0000, /* R572 */ + 0x0000, /* R573 */ + 0x0000, /* R574 */ + 0x0000, /* R575 */ + 0x0000, /* R576 - FLL2 Control (1) */ + 0x0000, /* R577 - FLL2 Control (2) */ + 0x0000, /* R578 - FLL2 Control (3) */ + 0x0000, /* R579 - FLL2 Control (4) */ + 0x0C80, /* R580 - FLL2 Control (5) */ + 0x0000, /* R581 */ + 0x0000, /* R582 */ + 0x0000, /* R583 */ + 0x0000, /* R584 */ + 0x0000, /* R585 */ + 0x0000, /* R586 */ + 0x0000, /* R587 */ + 0x0000, /* R588 */ + 0x0000, /* R589 */ + 0x0000, /* R590 */ + 0x0000, /* R591 */ + 0x0000, /* R592 */ + 0x0000, /* R593 */ + 0x0000, /* R594 */ + 0x0000, /* R595 */ + 0x0000, /* R596 */ + 0x0000, /* R597 */ + 0x0000, /* R598 */ + 0x0000, /* R599 */ + 0x0000, /* R600 */ + 0x0000, /* R601 */ + 0x0000, /* R602 */ + 0x0000, /* R603 */ + 0x0000, /* R604 */ + 0x0000, /* R605 */ + 0x0000, /* R606 */ + 0x0000, /* R607 */ + 0x0000, /* R608 */ + 0x0000, /* R609 */ + 0x0000, /* R610 */ + 0x0000, /* R611 */ + 0x0000, /* R612 */ + 0x0000, /* R613 */ + 0x0000, /* R614 */ + 0x0000, /* R615 */ + 0x0000, /* R616 */ + 0x0000, /* R617 */ + 0x0000, /* R618 */ + 0x0000, /* R619 */ + 0x0000, /* R620 */ + 0x0000, /* R621 */ + 0x0000, /* R622 */ + 0x0000, /* R623 */ + 0x0000, /* R624 */ + 0x0000, /* R625 */ + 0x0000, /* R626 */ + 0x0000, /* R627 */ + 0x0000, /* R628 */ + 0x0000, /* R629 */ + 0x0000, /* R630 */ + 0x0000, /* R631 */ + 0x0000, /* R632 */ + 0x0000, /* R633 */ + 0x0000, /* R634 */ + 0x0000, /* R635 */ + 0x0000, /* R636 */ + 0x0000, /* R637 */ + 0x0000, /* R638 */ + 0x0000, /* R639 */ + 0x0000, /* R640 */ + 0x0000, /* R641 */ + 0x0000, /* R642 */ + 0x0000, /* R643 */ + 0x0000, /* R644 */ + 0x0000, /* R645 */ + 0x0000, /* R646 */ + 0x0000, /* R647 */ + 0x0000, /* R648 */ + 0x0000, /* R649 */ + 0x0000, /* R650 */ + 0x0000, /* R651 */ + 0x0000, /* R652 */ + 0x0000, /* R653 */ + 0x0000, /* R654 */ + 0x0000, /* R655 */ + 0x0000, /* R656 */ + 0x0000, /* R657 */ + 0x0000, /* R658 */ + 0x0000, /* R659 */ + 0x0000, /* R660 */ + 0x0000, /* R661 */ + 0x0000, /* R662 */ + 0x0000, /* R663 */ + 0x0000, /* R664 */ + 0x0000, /* R665 */ + 0x0000, /* R666 */ + 0x0000, /* R667 */ + 0x0000, /* R668 */ + 0x0000, /* R669 */ + 0x0000, /* R670 */ + 0x0000, /* R671 */ + 0x0000, /* R672 */ + 0x0000, /* R673 */ + 0x0000, /* R674 */ + 0x0000, /* R675 */ + 0x0000, /* R676 */ + 0x0000, /* R677 */ + 0x0000, /* R678 */ + 0x0000, /* R679 */ + 0x0000, /* R680 */ + 0x0000, /* R681 */ + 0x0000, /* R682 */ + 0x0000, /* R683 */ + 0x0000, /* R684 */ + 0x0000, /* R685 */ + 0x0000, /* R686 */ + 0x0000, /* R687 */ + 0x0000, /* R688 */ + 0x0000, /* R689 */ + 0x0000, /* R690 */ + 0x0000, /* R691 */ + 0x0000, /* R692 */ + 0x0000, /* R693 */ + 0x0000, /* R694 */ + 0x0000, /* R695 */ + 0x0000, /* R696 */ + 0x0000, /* R697 */ + 0x0000, /* R698 */ + 0x0000, /* R699 */ + 0x0000, /* R700 */ + 0x0000, /* R701 */ + 0x0000, /* R702 */ + 0x0000, /* R703 */ + 0x0000, /* R704 */ + 0x0000, /* R705 */ + 0x0000, /* R706 */ + 0x0000, /* R707 */ + 0x0000, /* R708 */ + 0x0000, /* R709 */ + 0x0000, /* R710 */ + 0x0000, /* R711 */ + 0x0000, /* R712 */ + 0x0000, /* R713 */ + 0x0000, /* R714 */ + 0x0000, /* R715 */ + 0x0000, /* R716 */ + 0x0000, /* R717 */ + 0x0000, /* R718 */ + 0x0000, /* R719 */ + 0x0000, /* R720 */ + 0x0000, /* R721 */ + 0x0000, /* R722 */ + 0x0000, /* R723 */ + 0x0000, /* R724 */ + 0x0000, /* R725 */ + 0x0000, /* R726 */ + 0x0000, /* R727 */ + 0x0000, /* R728 */ + 0x0000, /* R729 */ + 0x0000, /* R730 */ + 0x0000, /* R731 */ + 0x0000, /* R732 */ + 0x0000, /* R733 */ + 0x0000, /* R734 */ + 0x0000, /* R735 */ + 0x0000, /* R736 */ + 0x0000, /* R737 */ + 0x0000, /* R738 */ + 0x0000, /* R739 */ + 0x0000, /* R740 */ + 0x0000, /* R741 */ + 0x0000, /* R742 */ + 0x0000, /* R743 */ + 0x0000, /* R744 */ + 0x0000, /* R745 */ + 0x0000, /* R746 */ + 0x0000, /* R747 */ + 0x0000, /* R748 */ + 0x0000, /* R749 */ + 0x0000, /* R750 */ + 0x0000, /* R751 */ + 0x0000, /* R752 */ + 0x0000, /* R753 */ + 0x0000, /* R754 */ + 0x0000, /* R755 */ + 0x0000, /* R756 */ + 0x0000, /* R757 */ + 0x0000, /* R758 */ + 0x0000, /* R759 */ + 0x0000, /* R760 */ + 0x0000, /* R761 */ + 0x0000, /* R762 */ + 0x0000, /* R763 */ + 0x0000, /* R764 */ + 0x0000, /* R765 */ + 0x0000, /* R766 */ + 0x0000, /* R767 */ + 0x4050, /* R768 - AIF1 Control (1) */ + 0x4000, /* R769 - AIF1 Control (2) */ + 0x0000, /* R770 - AIF1 Master/Slave */ + 0x0040, /* R771 - AIF1 BCLK */ + 0x0040, /* R772 - AIF1ADC LRCLK */ + 0x0040, /* R773 - AIF1DAC LRCLK */ + 0x0004, /* R774 - AIF1DAC Data */ + 0x0100, /* R775 - AIF1ADC Data */ + 0x0000, /* R776 */ + 0x0000, /* R777 */ + 0x0000, /* R778 */ + 0x0000, /* R779 */ + 0x0000, /* R780 */ + 0x0000, /* R781 */ + 0x0000, /* R782 */ + 0x0000, /* R783 */ + 0x4050, /* R784 - AIF2 Control (1) */ + 0x4000, /* R785 - AIF2 Control (2) */ + 0x0000, /* R786 - AIF2 Master/Slave */ + 0x0040, /* R787 - AIF2 BCLK */ + 0x0040, /* R788 - AIF2ADC LRCLK */ + 0x0040, /* R789 - AIF2DAC LRCLK */ + 0x0000, /* R790 - AIF2DAC Data */ + 0x0000, /* R791 - AIF2ADC Data */ + 0x0000, /* R792 */ + 0x0000, /* R793 */ + 0x0000, /* R794 */ + 0x0000, /* R795 */ + 0x0000, /* R796 */ + 0x0000, /* R797 */ + 0x0000, /* R798 */ + 0x0000, /* R799 */ + 0x0000, /* R800 */ + 0x0000, /* R801 */ + 0x0000, /* R802 */ + 0x0000, /* R803 */ + 0x0000, /* R804 */ + 0x0000, /* R805 */ + 0x0000, /* R806 */ + 0x0000, /* R807 */ + 0x0000, /* R808 */ + 0x0000, /* R809 */ + 0x0000, /* R810 */ + 0x0000, /* R811 */ + 0x0000, /* R812 */ + 0x0000, /* R813 */ + 0x0000, /* R814 */ + 0x0000, /* R815 */ + 0x0000, /* R816 */ + 0x0000, /* R817 */ + 0x0000, /* R818 */ + 0x0000, /* R819 */ + 0x0000, /* R820 */ + 0x0000, /* R821 */ + 0x0000, /* R822 */ + 0x0000, /* R823 */ + 0x0000, /* R824 */ + 0x0000, /* R825 */ + 0x0000, /* R826 */ + 0x0000, /* R827 */ + 0x0000, /* R828 */ + 0x0000, /* R829 */ + 0x0000, /* R830 */ + 0x0000, /* R831 */ + 0x0000, /* R832 */ + 0x0000, /* R833 */ + 0x0000, /* R834 */ + 0x0000, /* R835 */ + 0x0000, /* R836 */ + 0x0000, /* R837 */ + 0x0000, /* R838 */ + 0x0000, /* R839 */ + 0x0000, /* R840 */ + 0x0000, /* R841 */ + 0x0000, /* R842 */ + 0x0000, /* R843 */ + 0x0000, /* R844 */ + 0x0000, /* R845 */ + 0x0000, /* R846 */ + 0x0000, /* R847 */ + 0x0000, /* R848 */ + 0x0000, /* R849 */ + 0x0000, /* R850 */ + 0x0000, /* R851 */ + 0x0000, /* R852 */ + 0x0000, /* R853 */ + 0x0000, /* R854 */ + 0x0000, /* R855 */ + 0x0000, /* R856 */ + 0x0000, /* R857 */ + 0x0000, /* R858 */ + 0x0000, /* R859 */ + 0x0000, /* R860 */ + 0x0000, /* R861 */ + 0x0000, /* R862 */ + 0x0000, /* R863 */ + 0x0000, /* R864 */ + 0x0000, /* R865 */ + 0x0000, /* R866 */ + 0x0000, /* R867 */ + 0x0000, /* R868 */ + 0x0000, /* R869 */ + 0x0000, /* R870 */ + 0x0000, /* R871 */ + 0x0000, /* R872 */ + 0x0000, /* R873 */ + 0x0000, /* R874 */ + 0x0000, /* R875 */ + 0x0000, /* R876 */ + 0x0000, /* R877 */ + 0x0000, /* R878 */ + 0x0000, /* R879 */ + 0x0000, /* R880 */ + 0x0000, /* R881 */ + 0x0000, /* R882 */ + 0x0000, /* R883 */ + 0x0000, /* R884 */ + 0x0000, /* R885 */ + 0x0000, /* R886 */ + 0x0000, /* R887 */ + 0x0000, /* R888 */ + 0x0000, /* R889 */ + 0x0000, /* R890 */ + 0x0000, /* R891 */ + 0x0000, /* R892 */ + 0x0000, /* R893 */ + 0x0000, /* R894 */ + 0x0000, /* R895 */ + 0x0000, /* R896 */ + 0x0000, /* R897 */ + 0x0000, /* R898 */ + 0x0000, /* R899 */ + 0x0000, /* R900 */ + 0x0000, /* R901 */ + 0x0000, /* R902 */ + 0x0000, /* R903 */ + 0x0000, /* R904 */ + 0x0000, /* R905 */ + 0x0000, /* R906 */ + 0x0000, /* R907 */ + 0x0000, /* R908 */ + 0x0000, /* R909 */ + 0x0000, /* R910 */ + 0x0000, /* R911 */ + 0x0000, /* R912 */ + 0x0000, /* R913 */ + 0x0000, /* R914 */ + 0x0000, /* R915 */ + 0x0000, /* R916 */ + 0x0000, /* R917 */ + 0x0000, /* R918 */ + 0x0000, /* R919 */ + 0x0000, /* R920 */ + 0x0000, /* R921 */ + 0x0000, /* R922 */ + 0x0000, /* R923 */ + 0x0000, /* R924 */ + 0x0000, /* R925 */ + 0x0000, /* R926 */ + 0x0000, /* R927 */ + 0x0000, /* R928 */ + 0x0000, /* R929 */ + 0x0000, /* R930 */ + 0x0000, /* R931 */ + 0x0000, /* R932 */ + 0x0000, /* R933 */ + 0x0000, /* R934 */ + 0x0000, /* R935 */ + 0x0000, /* R936 */ + 0x0000, /* R937 */ + 0x0000, /* R938 */ + 0x0000, /* R939 */ + 0x0000, /* R940 */ + 0x0000, /* R941 */ + 0x0000, /* R942 */ + 0x0000, /* R943 */ + 0x0000, /* R944 */ + 0x0000, /* R945 */ + 0x0000, /* R946 */ + 0x0000, /* R947 */ + 0x0000, /* R948 */ + 0x0000, /* R949 */ + 0x0000, /* R950 */ + 0x0000, /* R951 */ + 0x0000, /* R952 */ + 0x0000, /* R953 */ + 0x0000, /* R954 */ + 0x0000, /* R955 */ + 0x0000, /* R956 */ + 0x0000, /* R957 */ + 0x0000, /* R958 */ + 0x0000, /* R959 */ + 0x0000, /* R960 */ + 0x0000, /* R961 */ + 0x0000, /* R962 */ + 0x0000, /* R963 */ + 0x0000, /* R964 */ + 0x0000, /* R965 */ + 0x0000, /* R966 */ + 0x0000, /* R967 */ + 0x0000, /* R968 */ + 0x0000, /* R969 */ + 0x0000, /* R970 */ + 0x0000, /* R971 */ + 0x0000, /* R972 */ + 0x0000, /* R973 */ + 0x0000, /* R974 */ + 0x0000, /* R975 */ + 0x0000, /* R976 */ + 0x0000, /* R977 */ + 0x0000, /* R978 */ + 0x0000, /* R979 */ + 0x0000, /* R980 */ + 0x0000, /* R981 */ + 0x0000, /* R982 */ + 0x0000, /* R983 */ + 0x0000, /* R984 */ + 0x0000, /* R985 */ + 0x0000, /* R986 */ + 0x0000, /* R987 */ + 0x0000, /* R988 */ + 0x0000, /* R989 */ + 0x0000, /* R990 */ + 0x0000, /* R991 */ + 0x0000, /* R992 */ + 0x0000, /* R993 */ + 0x0000, /* R994 */ + 0x0000, /* R995 */ + 0x0000, /* R996 */ + 0x0000, /* R997 */ + 0x0000, /* R998 */ + 0x0000, /* R999 */ + 0x0000, /* R1000 */ + 0x0000, /* R1001 */ + 0x0000, /* R1002 */ + 0x0000, /* R1003 */ + 0x0000, /* R1004 */ + 0x0000, /* R1005 */ + 0x0000, /* R1006 */ + 0x0000, /* R1007 */ + 0x0000, /* R1008 */ + 0x0000, /* R1009 */ + 0x0000, /* R1010 */ + 0x0000, /* R1011 */ + 0x0000, /* R1012 */ + 0x0000, /* R1013 */ + 0x0000, /* R1014 */ + 0x0000, /* R1015 */ + 0x0000, /* R1016 */ + 0x0000, /* R1017 */ + 0x0000, /* R1018 */ + 0x0000, /* R1019 */ + 0x0000, /* R1020 */ + 0x0000, /* R1021 */ + 0x0000, /* R1022 */ + 0x0000, /* R1023 */ + 0x00C0, /* R1024 - AIF1 ADC1 Left Volume */ + 0x00C0, /* R1025 - AIF1 ADC1 Right Volume */ + 0x00C0, /* R1026 - AIF1 DAC1 Left Volume */ + 0x00C0, /* R1027 - AIF1 DAC1 Right Volume */ + 0x00C0, /* R1028 - AIF1 ADC2 Left Volume */ + 0x00C0, /* R1029 - AIF1 ADC2 Right Volume */ + 0x00C0, /* R1030 - AIF1 DAC2 Left Volume */ + 0x00C0, /* R1031 - AIF1 DAC2 Right Volume */ + 0x0000, /* R1032 */ + 0x0000, /* R1033 */ + 0x0000, /* R1034 */ + 0x0000, /* R1035 */ + 0x0000, /* R1036 */ + 0x0000, /* R1037 */ + 0x0000, /* R1038 */ + 0x0000, /* R1039 */ + 0x0000, /* R1040 - AIF1 ADC1 Filters */ + 0x0000, /* R1041 - AIF1 ADC2 Filters */ + 0x0000, /* R1042 */ + 0x0000, /* R1043 */ + 0x0000, /* R1044 */ + 0x0000, /* R1045 */ + 0x0000, /* R1046 */ + 0x0000, /* R1047 */ + 0x0000, /* R1048 */ + 0x0000, /* R1049 */ + 0x0000, /* R1050 */ + 0x0000, /* R1051 */ + 0x0000, /* R1052 */ + 0x0000, /* R1053 */ + 0x0000, /* R1054 */ + 0x0000, /* R1055 */ + 0x0200, /* R1056 - AIF1 DAC1 Filters (1) */ + 0x0010, /* R1057 - AIF1 DAC1 Filters (2) */ + 0x0200, /* R1058 - AIF1 DAC2 Filters (1) */ + 0x0010, /* R1059 - AIF1 DAC2 Filters (2) */ + 0x0000, /* R1060 */ + 0x0000, /* R1061 */ + 0x0000, /* R1062 */ + 0x0000, /* R1063 */ + 0x0000, /* R1064 */ + 0x0000, /* R1065 */ + 0x0000, /* R1066 */ + 0x0000, /* R1067 */ + 0x0000, /* R1068 */ + 0x0000, /* R1069 */ + 0x0000, /* R1070 */ + 0x0000, /* R1071 */ + 0x0000, /* R1072 */ + 0x0000, /* R1073 */ + 0x0000, /* R1074 */ + 0x0000, /* R1075 */ + 0x0000, /* R1076 */ + 0x0000, /* R1077 */ + 0x0000, /* R1078 */ + 0x0000, /* R1079 */ + 0x0000, /* R1080 */ + 0x0000, /* R1081 */ + 0x0000, /* R1082 */ + 0x0000, /* R1083 */ + 0x0000, /* R1084 */ + 0x0000, /* R1085 */ + 0x0000, /* R1086 */ + 0x0000, /* R1087 */ + 0x0098, /* R1088 - AIF1 DRC1 (1) */ + 0x0845, /* R1089 - AIF1 DRC1 (2) */ + 0x0000, /* R1090 - AIF1 DRC1 (3) */ + 0x0000, /* R1091 - AIF1 DRC1 (4) */ + 0x0000, /* R1092 - AIF1 DRC1 (5) */ + 0x0000, /* R1093 */ + 0x0000, /* R1094 */ + 0x0000, /* R1095 */ + 0x0000, /* R1096 */ + 0x0000, /* R1097 */ + 0x0000, /* R1098 */ + 0x0000, /* R1099 */ + 0x0000, /* R1100 */ + 0x0000, /* R1101 */ + 0x0000, /* R1102 */ + 0x0000, /* R1103 */ + 0x0098, /* R1104 - AIF1 DRC2 (1) */ + 0x0845, /* R1105 - AIF1 DRC2 (2) */ + 0x0000, /* R1106 - AIF1 DRC2 (3) */ + 0x0000, /* R1107 - AIF1 DRC2 (4) */ + 0x0000, /* R1108 - AIF1 DRC2 (5) */ + 0x0000, /* R1109 */ + 0x0000, /* R1110 */ + 0x0000, /* R1111 */ + 0x0000, /* R1112 */ + 0x0000, /* R1113 */ + 0x0000, /* R1114 */ + 0x0000, /* R1115 */ + 0x0000, /* R1116 */ + 0x0000, /* R1117 */ + 0x0000, /* R1118 */ + 0x0000, /* R1119 */ + 0x0000, /* R1120 */ + 0x0000, /* R1121 */ + 0x0000, /* R1122 */ + 0x0000, /* R1123 */ + 0x0000, /* R1124 */ + 0x0000, /* R1125 */ + 0x0000, /* R1126 */ + 0x0000, /* R1127 */ + 0x0000, /* R1128 */ + 0x0000, /* R1129 */ + 0x0000, /* R1130 */ + 0x0000, /* R1131 */ + 0x0000, /* R1132 */ + 0x0000, /* R1133 */ + 0x0000, /* R1134 */ + 0x0000, /* R1135 */ + 0x0000, /* R1136 */ + 0x0000, /* R1137 */ + 0x0000, /* R1138 */ + 0x0000, /* R1139 */ + 0x0000, /* R1140 */ + 0x0000, /* R1141 */ + 0x0000, /* R1142 */ + 0x0000, /* R1143 */ + 0x0000, /* R1144 */ + 0x0000, /* R1145 */ + 0x0000, /* R1146 */ + 0x0000, /* R1147 */ + 0x0000, /* R1148 */ + 0x0000, /* R1149 */ + 0x0000, /* R1150 */ + 0x0000, /* R1151 */ + 0x6318, /* R1152 - AIF1 DAC1 EQ Gains (1) */ + 0x6300, /* R1153 - AIF1 DAC1 EQ Gains (2) */ + 0x0FCA, /* R1154 - AIF1 DAC1 EQ Band 1 A */ + 0x0400, /* R1155 - AIF1 DAC1 EQ Band 1 B */ + 0x00D8, /* R1156 - AIF1 DAC1 EQ Band 1 PG */ + 0x1EB5, /* R1157 - AIF1 DAC1 EQ Band 2 A */ + 0xF145, /* R1158 - AIF1 DAC1 EQ Band 2 B */ + 0x0B75, /* R1159 - AIF1 DAC1 EQ Band 2 C */ + 0x01C5, /* R1160 - AIF1 DAC1 EQ Band 2 PG */ + 0x1C58, /* R1161 - AIF1 DAC1 EQ Band 3 A */ + 0xF373, /* R1162 - AIF1 DAC1 EQ Band 3 B */ + 0x0A54, /* R1163 - AIF1 DAC1 EQ Band 3 C */ + 0x0558, /* R1164 - AIF1 DAC1 EQ Band 3 PG */ + 0x168E, /* R1165 - AIF1 DAC1 EQ Band 4 A */ + 0xF829, /* R1166 - AIF1 DAC1 EQ Band 4 B */ + 0x07AD, /* R1167 - AIF1 DAC1 EQ Band 4 C */ + 0x1103, /* R1168 - AIF1 DAC1 EQ Band 4 PG */ + 0x0564, /* R1169 - AIF1 DAC1 EQ Band 5 A */ + 0x0559, /* R1170 - AIF1 DAC1 EQ Band 5 B */ + 0x4000, /* R1171 - AIF1 DAC1 EQ Band 5 PG */ + 0x0000, /* R1172 */ + 0x0000, /* R1173 */ + 0x0000, /* R1174 */ + 0x0000, /* R1175 */ + 0x0000, /* R1176 */ + 0x0000, /* R1177 */ + 0x0000, /* R1178 */ + 0x0000, /* R1179 */ + 0x0000, /* R1180 */ + 0x0000, /* R1181 */ + 0x0000, /* R1182 */ + 0x0000, /* R1183 */ + 0x6318, /* R1184 - AIF1 DAC2 EQ Gains (1) */ + 0x6300, /* R1185 - AIF1 DAC2 EQ Gains (2) */ + 0x0FCA, /* R1186 - AIF1 DAC2 EQ Band 1 A */ + 0x0400, /* R1187 - AIF1 DAC2 EQ Band 1 B */ + 0x00D8, /* R1188 - AIF1 DAC2 EQ Band 1 PG */ + 0x1EB5, /* R1189 - AIF1 DAC2 EQ Band 2 A */ + 0xF145, /* R1190 - AIF1 DAC2 EQ Band 2 B */ + 0x0B75, /* R1191 - AIF1 DAC2 EQ Band 2 C */ + 0x01C5, /* R1192 - AIF1 DAC2 EQ Band 2 PG */ + 0x1C58, /* R1193 - AIF1 DAC2 EQ Band 3 A */ + 0xF373, /* R1194 - AIF1 DAC2 EQ Band 3 B */ + 0x0A54, /* R1195 - AIF1 DAC2 EQ Band 3 C */ + 0x0558, /* R1196 - AIF1 DAC2 EQ Band 3 PG */ + 0x168E, /* R1197 - AIF1 DAC2 EQ Band 4 A */ + 0xF829, /* R1198 - AIF1 DAC2 EQ Band 4 B */ + 0x07AD, /* R1199 - AIF1 DAC2 EQ Band 4 C */ + 0x1103, /* R1200 - AIF1 DAC2 EQ Band 4 PG */ + 0x0564, /* R1201 - AIF1 DAC2 EQ Band 5 A */ + 0x0559, /* R1202 - AIF1 DAC2 EQ Band 5 B */ + 0x4000, /* R1203 - AIF1 DAC2 EQ Band 5 PG */ + 0x0000, /* R1204 */ + 0x0000, /* R1205 */ + 0x0000, /* R1206 */ + 0x0000, /* R1207 */ + 0x0000, /* R1208 */ + 0x0000, /* R1209 */ + 0x0000, /* R1210 */ + 0x0000, /* R1211 */ + 0x0000, /* R1212 */ + 0x0000, /* R1213 */ + 0x0000, /* R1214 */ + 0x0000, /* R1215 */ + 0x0000, /* R1216 */ + 0x0000, /* R1217 */ + 0x0000, /* R1218 */ + 0x0000, /* R1219 */ + 0x0000, /* R1220 */ + 0x0000, /* R1221 */ + 0x0000, /* R1222 */ + 0x0000, /* R1223 */ + 0x0000, /* R1224 */ + 0x0000, /* R1225 */ + 0x0000, /* R1226 */ + 0x0000, /* R1227 */ + 0x0000, /* R1228 */ + 0x0000, /* R1229 */ + 0x0000, /* R1230 */ + 0x0000, /* R1231 */ + 0x0000, /* R1232 */ + 0x0000, /* R1233 */ + 0x0000, /* R1234 */ + 0x0000, /* R1235 */ + 0x0000, /* R1236 */ + 0x0000, /* R1237 */ + 0x0000, /* R1238 */ + 0x0000, /* R1239 */ + 0x0000, /* R1240 */ + 0x0000, /* R1241 */ + 0x0000, /* R1242 */ + 0x0000, /* R1243 */ + 0x0000, /* R1244 */ + 0x0000, /* R1245 */ + 0x0000, /* R1246 */ + 0x0000, /* R1247 */ + 0x0000, /* R1248 */ + 0x0000, /* R1249 */ + 0x0000, /* R1250 */ + 0x0000, /* R1251 */ + 0x0000, /* R1252 */ + 0x0000, /* R1253 */ + 0x0000, /* R1254 */ + 0x0000, /* R1255 */ + 0x0000, /* R1256 */ + 0x0000, /* R1257 */ + 0x0000, /* R1258 */ + 0x0000, /* R1259 */ + 0x0000, /* R1260 */ + 0x0000, /* R1261 */ + 0x0000, /* R1262 */ + 0x0000, /* R1263 */ + 0x0000, /* R1264 */ + 0x0000, /* R1265 */ + 0x0000, /* R1266 */ + 0x0000, /* R1267 */ + 0x0000, /* R1268 */ + 0x0000, /* R1269 */ + 0x0000, /* R1270 */ + 0x0000, /* R1271 */ + 0x0000, /* R1272 */ + 0x0000, /* R1273 */ + 0x0000, /* R1274 */ + 0x0000, /* R1275 */ + 0x0000, /* R1276 */ + 0x0000, /* R1277 */ + 0x0000, /* R1278 */ + 0x0000, /* R1279 */ + 0x00C0, /* R1280 - AIF2 ADC Left Volume */ + 0x00C0, /* R1281 - AIF2 ADC Right Volume */ + 0x00C0, /* R1282 - AIF2 DAC Left Volume */ + 0x00C0, /* R1283 - AIF2 DAC Right Volume */ + 0x0000, /* R1284 */ + 0x0000, /* R1285 */ + 0x0000, /* R1286 */ + 0x0000, /* R1287 */ + 0x0000, /* R1288 */ + 0x0000, /* R1289 */ + 0x0000, /* R1290 */ + 0x0000, /* R1291 */ + 0x0000, /* R1292 */ + 0x0000, /* R1293 */ + 0x0000, /* R1294 */ + 0x0000, /* R1295 */ + 0x0000, /* R1296 - AIF2 ADC Filters */ + 0x0000, /* R1297 */ + 0x0000, /* R1298 */ + 0x0000, /* R1299 */ + 0x0000, /* R1300 */ + 0x0000, /* R1301 */ + 0x0000, /* R1302 */ + 0x0000, /* R1303 */ + 0x0000, /* R1304 */ + 0x0000, /* R1305 */ + 0x0000, /* R1306 */ + 0x0000, /* R1307 */ + 0x0000, /* R1308 */ + 0x0000, /* R1309 */ + 0x0000, /* R1310 */ + 0x0000, /* R1311 */ + 0x0200, /* R1312 - AIF2 DAC Filters (1) */ + 0x0010, /* R1313 - AIF2 DAC Filters (2) */ + 0x0000, /* R1314 */ + 0x0000, /* R1315 */ + 0x0000, /* R1316 */ + 0x0000, /* R1317 */ + 0x0000, /* R1318 */ + 0x0000, /* R1319 */ + 0x0000, /* R1320 */ + 0x0000, /* R1321 */ + 0x0000, /* R1322 */ + 0x0000, /* R1323 */ + 0x0000, /* R1324 */ + 0x0000, /* R1325 */ + 0x0000, /* R1326 */ + 0x0000, /* R1327 */ + 0x0000, /* R1328 */ + 0x0000, /* R1329 */ + 0x0000, /* R1330 */ + 0x0000, /* R1331 */ + 0x0000, /* R1332 */ + 0x0000, /* R1333 */ + 0x0000, /* R1334 */ + 0x0000, /* R1335 */ + 0x0000, /* R1336 */ + 0x0000, /* R1337 */ + 0x0000, /* R1338 */ + 0x0000, /* R1339 */ + 0x0000, /* R1340 */ + 0x0000, /* R1341 */ + 0x0000, /* R1342 */ + 0x0000, /* R1343 */ + 0x0098, /* R1344 - AIF2 DRC (1) */ + 0x0845, /* R1345 - AIF2 DRC (2) */ + 0x0000, /* R1346 - AIF2 DRC (3) */ + 0x0000, /* R1347 - AIF2 DRC (4) */ + 0x0000, /* R1348 - AIF2 DRC (5) */ + 0x0000, /* R1349 */ + 0x0000, /* R1350 */ + 0x0000, /* R1351 */ + 0x0000, /* R1352 */ + 0x0000, /* R1353 */ + 0x0000, /* R1354 */ + 0x0000, /* R1355 */ + 0x0000, /* R1356 */ + 0x0000, /* R1357 */ + 0x0000, /* R1358 */ + 0x0000, /* R1359 */ + 0x0000, /* R1360 */ + 0x0000, /* R1361 */ + 0x0000, /* R1362 */ + 0x0000, /* R1363 */ + 0x0000, /* R1364 */ + 0x0000, /* R1365 */ + 0x0000, /* R1366 */ + 0x0000, /* R1367 */ + 0x0000, /* R1368 */ + 0x0000, /* R1369 */ + 0x0000, /* R1370 */ + 0x0000, /* R1371 */ + 0x0000, /* R1372 */ + 0x0000, /* R1373 */ + 0x0000, /* R1374 */ + 0x0000, /* R1375 */ + 0x0000, /* R1376 */ + 0x0000, /* R1377 */ + 0x0000, /* R1378 */ + 0x0000, /* R1379 */ + 0x0000, /* R1380 */ + 0x0000, /* R1381 */ + 0x0000, /* R1382 */ + 0x0000, /* R1383 */ + 0x0000, /* R1384 */ + 0x0000, /* R1385 */ + 0x0000, /* R1386 */ + 0x0000, /* R1387 */ + 0x0000, /* R1388 */ + 0x0000, /* R1389 */ + 0x0000, /* R1390 */ + 0x0000, /* R1391 */ + 0x0000, /* R1392 */ + 0x0000, /* R1393 */ + 0x0000, /* R1394 */ + 0x0000, /* R1395 */ + 0x0000, /* R1396 */ + 0x0000, /* R1397 */ + 0x0000, /* R1398 */ + 0x0000, /* R1399 */ + 0x0000, /* R1400 */ + 0x0000, /* R1401 */ + 0x0000, /* R1402 */ + 0x0000, /* R1403 */ + 0x0000, /* R1404 */ + 0x0000, /* R1405 */ + 0x0000, /* R1406 */ + 0x0000, /* R1407 */ + 0x6318, /* R1408 - AIF2 EQ Gains (1) */ + 0x6300, /* R1409 - AIF2 EQ Gains (2) */ + 0x0FCA, /* R1410 - AIF2 EQ Band 1 A */ + 0x0400, /* R1411 - AIF2 EQ Band 1 B */ + 0x00D8, /* R1412 - AIF2 EQ Band 1 PG */ + 0x1EB5, /* R1413 - AIF2 EQ Band 2 A */ + 0xF145, /* R1414 - AIF2 EQ Band 2 B */ + 0x0B75, /* R1415 - AIF2 EQ Band 2 C */ + 0x01C5, /* R1416 - AIF2 EQ Band 2 PG */ + 0x1C58, /* R1417 - AIF2 EQ Band 3 A */ + 0xF373, /* R1418 - AIF2 EQ Band 3 B */ + 0x0A54, /* R1419 - AIF2 EQ Band 3 C */ + 0x0558, /* R1420 - AIF2 EQ Band 3 PG */ + 0x168E, /* R1421 - AIF2 EQ Band 4 A */ + 0xF829, /* R1422 - AIF2 EQ Band 4 B */ + 0x07AD, /* R1423 - AIF2 EQ Band 4 C */ + 0x1103, /* R1424 - AIF2 EQ Band 4 PG */ + 0x0564, /* R1425 - AIF2 EQ Band 5 A */ + 0x0559, /* R1426 - AIF2 EQ Band 5 B */ + 0x4000, /* R1427 - AIF2 EQ Band 5 PG */ + 0x0000, /* R1428 */ + 0x0000, /* R1429 */ + 0x0000, /* R1430 */ + 0x0000, /* R1431 */ + 0x0000, /* R1432 */ + 0x0000, /* R1433 */ + 0x0000, /* R1434 */ + 0x0000, /* R1435 */ + 0x0000, /* R1436 */ + 0x0000, /* R1437 */ + 0x0000, /* R1438 */ + 0x0000, /* R1439 */ + 0x0000, /* R1440 */ + 0x0000, /* R1441 */ + 0x0000, /* R1442 */ + 0x0000, /* R1443 */ + 0x0000, /* R1444 */ + 0x0000, /* R1445 */ + 0x0000, /* R1446 */ + 0x0000, /* R1447 */ + 0x0000, /* R1448 */ + 0x0000, /* R1449 */ + 0x0000, /* R1450 */ + 0x0000, /* R1451 */ + 0x0000, /* R1452 */ + 0x0000, /* R1453 */ + 0x0000, /* R1454 */ + 0x0000, /* R1455 */ + 0x0000, /* R1456 */ + 0x0000, /* R1457 */ + 0x0000, /* R1458 */ + 0x0000, /* R1459 */ + 0x0000, /* R1460 */ + 0x0000, /* R1461 */ + 0x0000, /* R1462 */ + 0x0000, /* R1463 */ + 0x0000, /* R1464 */ + 0x0000, /* R1465 */ + 0x0000, /* R1466 */ + 0x0000, /* R1467 */ + 0x0000, /* R1468 */ + 0x0000, /* R1469 */ + 0x0000, /* R1470 */ + 0x0000, /* R1471 */ + 0x0000, /* R1472 */ + 0x0000, /* R1473 */ + 0x0000, /* R1474 */ + 0x0000, /* R1475 */ + 0x0000, /* R1476 */ + 0x0000, /* R1477 */ + 0x0000, /* R1478 */ + 0x0000, /* R1479 */ + 0x0000, /* R1480 */ + 0x0000, /* R1481 */ + 0x0000, /* R1482 */ + 0x0000, /* R1483 */ + 0x0000, /* R1484 */ + 0x0000, /* R1485 */ + 0x0000, /* R1486 */ + 0x0000, /* R1487 */ + 0x0000, /* R1488 */ + 0x0000, /* R1489 */ + 0x0000, /* R1490 */ + 0x0000, /* R1491 */ + 0x0000, /* R1492 */ + 0x0000, /* R1493 */ + 0x0000, /* R1494 */ + 0x0000, /* R1495 */ + 0x0000, /* R1496 */ + 0x0000, /* R1497 */ + 0x0000, /* R1498 */ + 0x0000, /* R1499 */ + 0x0000, /* R1500 */ + 0x0000, /* R1501 */ + 0x0000, /* R1502 */ + 0x0000, /* R1503 */ + 0x0000, /* R1504 */ + 0x0000, /* R1505 */ + 0x0000, /* R1506 */ + 0x0000, /* R1507 */ + 0x0000, /* R1508 */ + 0x0000, /* R1509 */ + 0x0000, /* R1510 */ + 0x0000, /* R1511 */ + 0x0000, /* R1512 */ + 0x0000, /* R1513 */ + 0x0000, /* R1514 */ + 0x0000, /* R1515 */ + 0x0000, /* R1516 */ + 0x0000, /* R1517 */ + 0x0000, /* R1518 */ + 0x0000, /* R1519 */ + 0x0000, /* R1520 */ + 0x0000, /* R1521 */ + 0x0000, /* R1522 */ + 0x0000, /* R1523 */ + 0x0000, /* R1524 */ + 0x0000, /* R1525 */ + 0x0000, /* R1526 */ + 0x0000, /* R1527 */ + 0x0000, /* R1528 */ + 0x0000, /* R1529 */ + 0x0000, /* R1530 */ + 0x0000, /* R1531 */ + 0x0000, /* R1532 */ + 0x0000, /* R1533 */ + 0x0000, /* R1534 */ + 0x0000, /* R1535 */ + 0x0000, /* R1536 - DAC1 Mixer Volumes */ + 0x0000, /* R1537 - DAC1 Left Mixer Routing */ + 0x0000, /* R1538 - DAC1 Right Mixer Routing */ + 0x0000, /* R1539 - DAC2 Mixer Volumes */ + 0x0000, /* R1540 - DAC2 Left Mixer Routing */ + 0x0000, /* R1541 - DAC2 Right Mixer Routing */ + 0x0000, /* R1542 - AIF1 ADC1 Left Mixer Routing */ + 0x0000, /* R1543 - AIF1 ADC1 Right Mixer Routing */ + 0x0000, /* R1544 - AIF1 ADC2 Left Mixer Routing */ + 0x0000, /* R1545 - AIF1 ADC2 Right mixer Routing */ + 0x0000, /* R1546 */ + 0x0000, /* R1547 */ + 0x0000, /* R1548 */ + 0x0000, /* R1549 */ + 0x0000, /* R1550 */ + 0x0000, /* R1551 */ + 0x02C0, /* R1552 - DAC1 Left Volume */ + 0x02C0, /* R1553 - DAC1 Right Volume */ + 0x02C0, /* R1554 - DAC2 Left Volume */ + 0x02C0, /* R1555 - DAC2 Right Volume */ + 0x0000, /* R1556 - DAC Softmute */ + 0x0000, /* R1557 */ + 0x0000, /* R1558 */ + 0x0000, /* R1559 */ + 0x0000, /* R1560 */ + 0x0000, /* R1561 */ + 0x0000, /* R1562 */ + 0x0000, /* R1563 */ + 0x0000, /* R1564 */ + 0x0000, /* R1565 */ + 0x0000, /* R1566 */ + 0x0000, /* R1567 */ + 0x0002, /* R1568 - Oversampling */ + 0x0000, /* R1569 - Sidetone */ +}; diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 948677b..d9c6dd5 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -57,8 +57,6 @@ static int wm8994_retune_mobile_base[] = { WM8994_AIF2_EQ_GAINS_1, }; -#define WM8994_REG_CACHE_SIZE 0x621 - struct wm8994_micdet { struct snd_soc_jack *jack; int det; @@ -71,7 +69,6 @@ struct wm8994_priv { enum snd_soc_control_type control_type; void *control_data; struct snd_soc_codec *codec; - u16 reg_cache[WM8994_REG_CACHE_SIZE + 1]; int sysclk[2]; int sysclk_rate[2]; int mclk[2]; @@ -134,7 +131,7 @@ static int wm8994_readable(unsigned int reg) static int wm8994_volatile(unsigned int reg) { - if (reg >= WM8994_REG_CACHE_SIZE) + if (reg >= WM8994_CACHE_SIZE) return 1; switch (reg) { @@ -156,12 +153,16 @@ static int wm8994_volatile(unsigned int reg) static int wm8994_write(struct snd_soc_codec *codec, unsigned int reg, unsigned int value) { - struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + int ret; BUG_ON(reg > WM8994_MAX_REGISTER); - if (!wm8994_volatile(reg)) - wm8994->reg_cache[reg] = value; + if (!wm8994_volatile(reg)) { + ret = snd_soc_cache_write(codec, reg, value); + if (ret != 0) + dev_err(codec->dev, "Cache write to %x failed: %d\n", + reg, ret); + } return wm8994_reg_write(codec->control_data, reg, value); } @@ -169,14 +170,22 @@ static int wm8994_write(struct snd_soc_codec *codec, unsigned int reg, static unsigned int wm8994_read(struct snd_soc_codec *codec, unsigned int reg) { - u16 *reg_cache = codec->reg_cache; + unsigned int val; + int ret; BUG_ON(reg > WM8994_MAX_REGISTER); - if (wm8994_volatile(reg)) - return wm8994_reg_read(codec->control_data, reg); - else - return reg_cache[reg]; + if (!wm8994_volatile(reg) && wm8994_readable(reg) && + reg < codec->driver->reg_cache_size) { + ret = snd_soc_cache_read(codec, reg, &val); + if (ret >= 0) + return val; + else + dev_err(codec->dev, "Cache read from %x failed: %d\n", + reg, ret); + } + + return wm8994_reg_read(codec->control_data, reg); } static int configure_aif_clock(struct snd_soc_codec *codec, int aif) @@ -2370,26 +2379,12 @@ static int wm8994_suspend(struct snd_soc_codec *codec, pm_message_t state) static int wm8994_resume(struct snd_soc_codec *codec) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - u16 *reg_cache = codec->reg_cache; int i, ret; /* Restore the registers */ - for (i = 1; i < ARRAY_SIZE(wm8994->reg_cache); i++) { - switch (i) { - case WM8994_LDO_1: - case WM8994_LDO_2: - case WM8994_SOFTWARE_RESET: - /* Handled by other MFD drivers */ - continue; - default: - break; - } - - if (!wm8994_access_masks[i].writable) - continue; - - wm8994_reg_write(codec->control_data, i, reg_cache[i]); - } + ret = snd_soc_cache_sync(codec); + if (ret != 0) + dev_err(codec->dev, "Failed to sync cache: %d\n", ret); wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -2782,27 +2777,27 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) return -ENOMEM; snd_soc_codec_set_drvdata(codec, wm8994); - codec->reg_cache = &wm8994->reg_cache; - wm8994->pdata = dev_get_platdata(codec->dev->parent); wm8994->codec = codec; - /* Fill the cache with physical values we inherited; don't reset */ - ret = wm8994_bulk_read(codec->control_data, 0, - ARRAY_SIZE(wm8994->reg_cache) - 1, - codec->reg_cache); - if (ret < 0) { - dev_err(codec->dev, "Failed to fill register cache: %d\n", - ret); - goto err; - } + /* Read our current status back from the chip - we don't want to + * reset as this may interfere with the GPIO or LDO operation. */ + for (i = 0; i < WM8994_CACHE_SIZE; i++) { + if (!wm8994_readable(i) || wm8994_volatile(i)) + continue; - /* Clear the cached values for unreadable/volatile registers to - * avoid potential confusion. - */ - for (i = 0; i < ARRAY_SIZE(wm8994->reg_cache); i++) - if (wm8994_volatile(i) || !wm8994_readable(i)) - wm8994->reg_cache[i] = 0; + ret = wm8994_reg_read(codec->control_data, i); + if (ret <= 0) + continue; + + ret = snd_soc_cache_write(codec, i, ret); + if (ret != 0) { + dev_err(codec->dev, + "Failed to initialise cache for 0x%x: %d\n", + i, ret); + goto err; + } + } /* Set revision-specific configuration */ wm8994->revision = snd_soc_read(codec, WM8994_CHIP_REVISION); @@ -3029,11 +3024,15 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8994 = { .remove = wm8994_codec_remove, .suspend = wm8994_suspend, .resume = wm8994_resume, - .read = wm8994_read, - .write = wm8994_write, + .read = wm8994_read, + .write = wm8994_write, .readable_register = wm8994_readable, .volatile_register = wm8994_volatile, .set_bias_level = wm8994_set_bias_level, + + .reg_cache_size = WM8994_CACHE_SIZE, + .reg_cache_default = wm8994_reg_defaults, + .reg_word_size = 2, }; static int __devinit wm8994_probe(struct platform_device *pdev) diff --git a/sound/soc/codecs/wm8994.h b/sound/soc/codecs/wm8994.h index 455cae6..0c355bf 100644 --- a/sound/soc/codecs/wm8994.h +++ b/sound/soc/codecs/wm8994.h @@ -43,5 +43,6 @@ struct wm8994_access_mask { }; extern const struct wm8994_access_mask wm8994_access_masks[WM8994_CACHE_SIZE]; +extern const __devinitdata u16 wm8994_reg_defaults[WM8994_CACHE_SIZE]; #endif -- 1.7.1

2 4

[alsa-devel] [PATCH 1/4] ASoC: Initial WM8958 audio configuration
by Mark Brown 26 Nov '10

26 Nov '10

The WM8958 is a WM8994 derivative. This patch merely ensures that some revision specific configuration for WM8994 is not enabled on WM8994, additional patches will add support for the new features introduced on the WM8958. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994.c | 110 +++++++++++++++++++++++++++++++-------------- 1 files changed, 76 insertions(+), 34 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 2833994..8232d5e 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1535,6 +1535,7 @@ static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai, static int wm8994_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { + struct wm8994 *control = codec->control_data; struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); switch (level) { @@ -1551,7 +1552,7 @@ static int wm8994_set_bias_level(struct snd_soc_codec *codec, if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { /* Tweak DC servo and DSP configuration for * improved performance. */ - if (wm8994->revision < 4) { + if (control->type == WM8994 && wm8994->revision < 4) { /* Tweak DC servo and DSP configuration for * improved performance. */ snd_soc_write(codec, 0x102, 0x3); @@ -2264,8 +2265,12 @@ int wm8994_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); struct wm8994_micdet *micdet; + struct wm8994 *control = codec->control_data; int reg; + if (control->type != WM8994) + return -EINVAL; + switch (micbias) { case 1: micdet = &wm8994->micdet[0]; @@ -2334,11 +2339,13 @@ static irqreturn_t wm8994_mic_irq(int irq, void *data) static int wm8994_codec_probe(struct snd_soc_codec *codec) { + struct wm8994 *control; struct wm8994_priv *wm8994; struct snd_soc_dapm_context *dapm = &codec->dapm; int ret, i; codec->control_data = dev_get_drvdata(codec->dev->parent); + control = codec->control_data; wm8994 = kzalloc(sizeof(struct wm8994_priv), GFP_KERNEL); if (wm8994 == NULL) @@ -2369,41 +2376,67 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) /* Set revision-specific configuration */ wm8994->revision = snd_soc_read(codec, WM8994_CHIP_REVISION); - switch (wm8994->revision) { - case 2: - case 3: - wm8994->hubs.dcs_codes = -5; - wm8994->hubs.hp_startup_mode = 1; + switch (control->type) { + case WM8994: + switch (wm8994->revision) { + case 2: + case 3: + wm8994->hubs.dcs_codes = -5; + wm8994->hubs.hp_startup_mode = 1; + wm8994->hubs.dcs_readback_mode = 1; + break; + default: + wm8994->hubs.dcs_readback_mode = 1; + break; + } + + case WM8958: wm8994->hubs.dcs_readback_mode = 1; break; + default: - wm8994->hubs.dcs_readback_mode = 1; break; } - ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_MIC1_DET, - wm8994_mic_irq, "Mic 1 detect", wm8994); - if (ret != 0) - dev_warn(codec->dev, - "Failed to request Mic1 detect IRQ: %d\n", ret); - - ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_MIC1_SHRT, - wm8994_mic_irq, "Mic 1 short", wm8994); - if (ret != 0) - dev_warn(codec->dev, - "Failed to request Mic1 short IRQ: %d\n", ret); - - ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_MIC2_DET, - wm8994_mic_irq, "Mic 2 detect", wm8994); - if (ret != 0) - dev_warn(codec->dev, - "Failed to request Mic2 detect IRQ: %d\n", ret); - - ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_MIC2_SHRT, - wm8994_mic_irq, "Mic 2 short", wm8994); - if (ret != 0) - dev_warn(codec->dev, - "Failed to request Mic2 short IRQ: %d\n", ret); + switch (control->type) { + case WM8994: + ret = wm8994_request_irq(codec->control_data, + WM8994_IRQ_MIC1_DET, + wm8994_mic_irq, "Mic 1 detect", + wm8994); + if (ret != 0) + dev_warn(codec->dev, + "Failed to request Mic1 detect IRQ: %d\n", + ret); + + ret = wm8994_request_irq(codec->control_data, + WM8994_IRQ_MIC1_SHRT, + wm8994_mic_irq, "Mic 1 short", + wm8994); + if (ret != 0) + dev_warn(codec->dev, + "Failed to request Mic1 short IRQ: %d\n", + ret); + + ret = wm8994_request_irq(codec->control_data, + WM8994_IRQ_MIC2_DET, + wm8994_mic_irq, "Mic 2 detect", + wm8994); + if (ret != 0) + dev_warn(codec->dev, + "Failed to request Mic2 detect IRQ: %d\n", + ret); + + ret = wm8994_request_irq(codec->control_data, + WM8994_IRQ_MIC2_SHRT, + wm8994_mic_irq, "Mic 2 short", + wm8994); + if (ret != 0) + dev_warn(codec->dev, + "Failed to request Mic2 short IRQ: %d\n", + ret); + break; + } /* Remember if AIFnLRCLK is configured as a GPIO. This should be * configured on init - if a system wants to do this dynamically @@ -2496,13 +2529,22 @@ err: static int wm8994_codec_remove(struct snd_soc_codec *codec) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + struct wm8994 *control = codec->control_data; wm8994_set_bias_level(codec, SND_SOC_BIAS_OFF); - wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC2_SHRT, wm8994); - wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC2_DET, wm8994); - wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_SHRT, wm8994); - wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_DET, wm8994); + switch (control->type) { + case WM8994: + wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC2_SHRT, + wm8994); + wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC2_DET, + wm8994); + wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_SHRT, + wm8994); + wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_DET, + wm8994); + break; + } kfree(wm8994->retune_mobile_texts); kfree(wm8994->drc_texts); kfree(wm8994); -- 1.7.1

2 4

[alsa-devel] [PATCH] ALSA: patch_realtek: handle unset external amp bits
by Kyle McMartin 26 Nov '10

26 Nov '10

From: Kyle McMartin <kyle(a)redhat.com> Commit ef5dbbcc removes the default initialization of init_amp to ALC_INIT_DEFAULT, with the justification that it should be set by alc_subsystem_id, which contains a switch case: tmp = (ass & 0x38) >> 3; /* external Amp control */ switch (tmp) { case 1: ... case 5: } Which handles values 1,3,7 for GPIOs, or 5 to set _DEFAULT. But... what if it's 0? :) I got a bug report this morning from a user whose sound had broken between 2.6.34 and 2.6.35, and I bisected it down to this commit. [ 32.366183] ALSA sound/pci/hda/patch_realtek.c:1374: realtek: Enabling init ASM_ID=0x8a05 CODEC_ID=10ec0888 (0x8a05 & 0x38) >> 3 = 0; But otherwise the SKU looks fine (since if I revert that commit, it seems to work correctly.) I think the best thing to do would be to either restore the 'redundant' default initialization, or quirk it. https://bugzilla.redhat.com/show_bug.cgi?id=657388 Signed-off-by: Kyle McMartin <kyle(a)redhat.com> --- Revert "ALSA: hda - Remove superfluous external amp setup for ALC888" This reverts commit ef5dbbccbbfa7d2211fa8efcc095a9f4a7912dda. diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 76c4968..b6ba1d5 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10604,6 +10604,9 @@ static int patch_alc882(struct hda_codec *codec) spec->stream_digital_playback = &alc882_pcm_digital_playback; spec->stream_digital_capture = &alc882_pcm_digital_capture; + if (codec->vendor_id == 0x10ec0888) + spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */ + if (!spec->adc_nids && spec->input_mux) { int i, j; spec->num_adc_nids = 0;

2 5

[alsa-devel] [BISECTED] 2.6.36 regression for ALC892
by Andrey Rahmatullin 26 Nov '10

26 Nov '10

Hello. I have an Intel H55 motherboard (ASUS P7H55-M PRO) with ALC892 sound codec and a 3.5" front panel which doesn't support newer HDA pinout. So the panel is connected in "AC97" mode and this mode is set in the BIOS setup. In 2.6.35 and earlier the panel's headphones jack was working. Now it isn't. I've bisected this down to ce503f38bdb59c9175a9076215a3ba579fad4e64 (which is present in 2.6.36), reverting it helps. I've got "Too many connections" messages without this commit, indeed, but I had no problems (though I use only a pair of speakers connected to the rear panel and headphones in the front panel). -- WBR, wRAR

2 6

[alsa-devel] usage of SOC_ENUM_SINGLE
by Koul, Vinod 26 Nov '10

26 Nov '10

Hi I am trying to add an output control which is basically a switch between headset and earpiece. The H/W register for this asks me to write 0x40 for EP and 0x3 for enabling Headset So I did this: static const char *headset_switch_text[] = { "Earpiece", "HeadSet" }; static const struct snd_kcontrol_new intel_msic_snd_controls[] = { SOC_ENUM_SINGLE(OUTEN, 0x43, 0x40, headset_switch_text), }; Would this be the right thing, I am interpreting that 0x40 will be written for earpiece in above and 0x3 for headset ~Vinod

2 3

[alsa-devel] ASoC updates for 2.6.37
by Mark Brown 26 Nov '10

26 Nov '10

The following changes since commit d6f443ae4c1d54379ad5953d7bcb89a63387184d: ASoC: nuc900-ac97: fix a memory leak (2010-11-24 11:31:18 +0000) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.37 Axel has been very busy with lots of small fixes, mostly in error handling or unregistration paths which are rarely exercised. Axel Lin (11): ASoC: Call snd_soc_unregister_dais instead of snd_soc_unregister_dai in sh4_soc_dai_remove ASoC: efika-audio-fabric: fix resource leak in efika_fabric_init error path ASoC: pcm030-audio-fabric: fix resource leak in pcm030_fabric_init error path ASoC: snd-soc-afeb9260: remove unneeded platform_device_del in error path ASoC: sam9g20_wm8731: fix resource leak in at91sam9g20ek_init error path ASoC: simone: fix resource leak in simone_init error path ASoC: imx-ssi: fix resource leak ASoC: phycore-ac97: fix resource leak ASoC: davinci-vcif - fix a memory leak ASoC: tlv320aic3x - fix variable may be used uninitialized warning ASoC: Fix resource reclaim for osk5912 Dmitry Artamonow (1): ASoC: fix SND_PXA2XX_LIB Kconfig warning sound/soc/atmel/sam9g20_wm8731.c | 5 ++++- sound/soc/atmel/snd-soc-afeb9260.c | 1 - sound/soc/codecs/tlv320aic3x.c | 6 +++--- sound/soc/davinci/davinci-vcif.c | 3 +++ sound/soc/ep93xx/simone.c | 18 ++++++++++-------- sound/soc/fsl/efika-audio-fabric.c | 1 + sound/soc/fsl/pcm030-audio-fabric.c | 1 + sound/soc/imx/imx-ssi.c | 15 +++++++++++---- sound/soc/imx/phycore-ac97.c | 28 +++++++++++++++++++++------- sound/soc/omap/osk5912.c | 11 ++++++++--- sound/soc/pxa/Kconfig | 1 + sound/soc/sh/ssi.c | 2 +- 12 files changed, 64 insertions(+), 28 deletions(-)

2 1

[alsa-devel] No sound with Sony VAIO VPCZ11 (ALC889)
by Ozan Çağlayan 26 Nov '10

26 Nov '10

Hi, alsa-driver: Latest snapshot (20101124) Kernel: 2.6.36 Problem: No mixers available and thus no sound. alsa-info: !!################################ !!ALSA Information Script v 0.4.59 !!################################ !!Script ran on: Wed Nov 24 10:34:19 UTC 2010 !!Linux Distribution !!------------------ Pardus 2011 Beta !!DMI Information !!--------------- Manufacturer: Sony Corporation Product Name: VPCZ114GX !!Kernel Information !!------------------ Kernel release: 2.6.36-145 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.23 (1.0.23_20101124-65) Library version: (1.0.23_20100814-45) Utilities version: 1.0.23 (1.0.23_20100819-44) !!Loaded ALSA modules !!------------------- snd_hda_intel snd_hda_intel !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - No Jack: Installed - Yes (/usr/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd7820000 irq 44 1 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xd1000000 irq 16 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:3b56 (rev 05) Subsystem: 104d:905a -- 01:00.1 0403: 10de:0be2 (rev a1) Subsystem: 104d:905a !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), (null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), (null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), (null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N !!Module: snd_hda_intel bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), (null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), (null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), (null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Realtek ALC889 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0889 Subsystem Id: 0x104d4400 Revision Id: 0x100005 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x05 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x80 0x80] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x24 Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x570]: 32000 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Unsolicited: tag=00, enabled=0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3e, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3e, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3e, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3e, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x05 0x0b Node 0x10 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x11 [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 1 0x10 Node 0x12 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x90a60120: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001003c: IN OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001003c: IN OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0421101f: [Jack] HP Out at Ext Right Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0x00: Unsolicited: tag=04, enabled=1 Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000034: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e* 0x0f 0x26 Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000034: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e 0x0f* 0x26 Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x04a1102e: [Jack] Mic at Ext Right Conn = 1/8, Color = Black DefAssociation = 0x2, Sequence = 0xe Pin-ctls: 0x00: VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e 0x0f 0x26* Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x04a11030: [Jack] Mic at Ext Right Conn = 1/8, Color = Black DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x00: VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e 0x0f 0x26* Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e 0x0f 0x26* Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e 0x0f 0x26* Node 0x1c [Pin Complex] wcaps 0x400081: Stereo Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400280: Mono Digital Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=28 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Audio Selector] wcaps 0x300101: Stereo Connection: 12 0x18* 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12 Node 0x25 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3e, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x3e 0x3e] Connection: 2 0x25 0x0b Codec: Nvidia ID a Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x10de000a Subsystem Id: 0x10de0101 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Unsolicited: tag=00, enabled=0 Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP Pincap 0x09000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Codec: Nvidia ID a Address: 1 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x10de000a Subsystem Id: 0x10de0101 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Unsolicited: tag=00, enabled=0 Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP Pincap 0x09000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Codec: Nvidia ID a Address: 2 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x10de000a Subsystem Id: 0x10de0101 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Unsolicited: tag=00, enabled=0 Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP Pincap 0x09000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Codec: Nvidia ID a Address: 3 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x10de000a Subsystem Id: 0x10de0101 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Unsolicited: tag=00, enabled=0 Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP Pincap 0x09000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x04 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 5 Nov 24 2010 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 10 Nov 24 2010 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 4 Nov 24 2010 /dev/snd/hwC0D0 crw-rw---- 1 root audio 116, 9 Nov 24 2010 /dev/snd/hwC1D0 crw-rw---- 1 root audio 116, 8 Nov 24 2010 /dev/snd/hwC1D1 crw-rw---- 1 root audio 116, 7 Nov 24 2010 /dev/snd/hwC1D2 crw-rw---- 1 root audio 116, 6 Nov 24 2010 /dev/snd/hwC1D3 crw-rw---- 1 root audio 116, 3 Nov 24 2010 /dev/snd/seq crw-rw---- 1 root audio 116, 2 Nov 24 2010 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Nov 24 2010 . drwxr-xr-x 3 root root 240 Nov 24 2010 .. lrwxrwxrwx 1 root root 12 Nov 24 2010 pci-0000:00:1b.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Nov 24 2010 pci-0000:01:00.1 -> ../controlC1 !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # PulseAudio plugin configuration # Let's create a virtual device "pulse" for mixer and PCM pcm.pulse { type pulse hint { description "PulseAudio Sound Server" } } ctl.pulse { type pulse hint { description "PulseAudio Sound Server" } } # Let's make it the default! pcm.!default { type pulse hint { description "Default" } } ctl.!default { type pulse hint { description "Default" } } !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** ARECORD **** List of CAPTURE Hardware Devices **** !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Card hw:0 'Intel'/'HDA Intel at 0xd7820000 irq 44' Mixer name : 'Realtek ALC889' Components : 'HDA:10ec0889,104d4400,00100005' Controls : 0 Simple ctrls : 0 !!-------Mixer controls for card 1 [NVidia] Card hw:1 'NVidia'/'HDA NVidia at 0xd1000000 irq 16' Mixer name : 'Nvidia ID a' Components : 'HDA:10de000a,10de0101,00100100' Controls : 0 Simple ctrls : 0 !!Alsactl output !!------------- --startcollapse-- state.Intel { control { } } state.NVidia { control { } } --endcollapse-- !!All Loaded Modules !!------------------ Module rfcomm sco bnep l2cap snd_hda_codec_realtek snd_hda_intel snd_hda_codec arc4 ecb snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device iwlagn snd_pcm_oss snd_mixer_oss iwlcore snd_pcm mac80211 cfg80211 uvcvideo snd_timer btusb bluetooth snd videodev sony_laptop v4l1_compat soundcore v4l2_compat_ioctl32 e1000e microcode snd_page_alloc pcspkr joydev serio_raw shpchp rfkill wmi dm_mod sdhci_pci sdhci mmc_core led_class nouveau ttm ahci libahci i915 drm_kms_helper drm i2c_algo_bit video output !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x11 0x411111f0 0x12 0x90a60120 0x14 0x90170110 0x15 0x0421101f 0x16 0x411111f0 0x17 0x411111f0 0x18 0x04a1102e 0x19 0x04a11030 0x1a 0x411111f0 0x1b 0x411111f0 0x1c 0x411111f0 0x1d 0x411111f0 0x1e 0x411111f0 0x1f 0x411111f0 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC1D0/init_pin_configs: 0x05 0x18560010 /sys/class/sound/hwC1D0/driver_pin_configs: /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: /sys/class/sound/hwC1D1/init_pin_configs: 0x05 0x18560010 /sys/class/sound/hwC1D1/driver_pin_configs: /sys/class/sound/hwC1D1/user_pin_configs: /sys/class/sound/hwC1D1/init_verbs: /sys/class/sound/hwC1D2/init_pin_configs: 0x05 0x18560010 /sys/class/sound/hwC1D2/driver_pin_configs: /sys/class/sound/hwC1D2/user_pin_configs: /sys/class/sound/hwC1D2/init_verbs: /sys/class/sound/hwC1D3/init_pin_configs: 0x05 0x18560010 /sys/class/sound/hwC1D3/driver_pin_configs: /sys/class/sound/hwC1D3/user_pin_configs: /sys/class/sound/hwC1D3/init_verbs: !!ALSA/HDA dmesg !!------------------ [ 10.368775] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.368898] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 10.368930] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.368937] ALSA hda_intel.c:2559: chipset global capabilities = 0x4401 [ 10.376411] ALSA hda_intel.c:914: codec_mask = 0x1 [ 10.376508] ALSA hda_intel.c:1354: codec #0 probed OK [ 10.401909] hda_codec: ALC889: BIOS auto-probing. [ 10.401913] hda_codec: ALC889: SKU not ready 0x411111f0 [ 10.401919] ALSA hda_codec.c:4619: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 10.401923] ALSA hda_codec.c:4623: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.401927] ALSA hda_codec.c:4627: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 10.401930] ALSA hda_codec.c:4628: mono: mono_out=0x0 [ 10.401933] ALSA hda_codec.c:4632: inputs: [ 10.401936] ALSA hda_codec.c:4636: Internal Mic=0x12 [ 10.401939] ALSA hda_codec.c:4636: Mic=0x18 [ 10.401942] ALSA hda_codec.c:4636: Mic=0x19 [ 10.401944] ALSA hda_codec.c:4638:· [ 10.406917] hda_codec: cannot build controls for #0 (error -16) <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< [ 10.407769] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 10.408149] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.408153] hda_intel: Disable MSI for Nvidia chipset [ 10.408236] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 10.408243] ALSA hda_intel.c:2559: chipset global capabilities = 0x2403 [ 10.415369] ALSA hda_intel.c:914: codec_mask = 0xf [ 10.418351] ALSA hda_intel.c:1354: codec #0 probed OK [ 10.423344] ALSA hda_intel.c:1354: codec #1 probed OK [ 10.426342] ALSA hda_intel.c:1354: codec #2 probed OK [ 10.429346] ALSA hda_intel.c:1354: codec #3 probed OK [ 10.607042] ALSA hda_generic.c:652: hda_generic: no proper input path found [ 10.607046] ALSA hda_generic.c:430: hda_generic: no proper output path found [ 10.629002] ALSA hda_generic.c:652: hda_generic: no proper input path found [ 10.629006] ALSA hda_generic.c:430: hda_generic: no proper output path found [ 10.650966] ALSA hda_generic.c:652: hda_generic: no proper input path found [ 10.650969] ALSA hda_generic.c:430: hda_generic: no proper output path found [ 10.672930] ALSA hda_generic.c:652: hda_generic: no proper input path found [ 10.672933] ALSA hda_generic.c:430: hda_generic: no proper output path found [ 10.672936] ALSA hda_generic.c:1005: hda_generic: no PCM found [ 10.672938] ALSA hda_generic.c:1005: hda_generic: no PCM found [ 10.672940] ALSA hda_generic.c:1005: hda_generic: no PCM found [ 10.672942] ALSA hda_generic.c:1005: hda_generic: no PCM found --- Ozan Çağlayan TUBITAK/UEKAE - Pardus Linux http://www.pardus.org.tr/eng

2 6

[alsa-devel] [PATCH] ASoC: Remove redundant hw_write initialisation in WM8737
by Mark Brown 26 Nov '10

26 Nov '10

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8737.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8737.c b/sound/soc/codecs/wm8737.c index 2301338..30c67d0 100644 --- a/sound/soc/codecs/wm8737.c +++ b/sound/soc/codecs/wm8737.c @@ -560,7 +560,6 @@ static int wm8737_probe(struct snd_soc_codec *codec) struct wm8737_priv *wm8737 = snd_soc_codec_get_drvdata(codec); int ret, i; - codec->hw_write = (hw_write_t)i2c_master_send; ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8737->control_type); if (ret != 0) { dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); -- 1.7.1

2 1

[alsa-devel] Linux USB audio driver - sample code / link / documentation
by Ramya Desai 26 Nov '10

26 Nov '10

Dear All, I did not find a document for writing a USB audio driver under Linux environment. Please let me know any sample driver / link / document which describes about the USB audio driver under Linux environment. Thanks and Regards, Ramya.

3 6

[alsa-devel] [PATCH] configure.in: Fix variable name
by Ozan Çağlayan 26 Nov '10

26 Nov '10

Fix variable name for --with-asound-state-dir as currently we have to pass --with-ASOUND_STATE_DIR= which is wrong and inconsistent with the other switches. Signed-off-by: Ozan Çağlayan <ozan(a)pardus.org.tr> --- configure.in | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/configure.in b/configure.in index 94a2b17..77778da 100644 --- a/configure.in +++ b/configure.in @@ -289,7 +289,7 @@ if test "x$with_systemdsystemunitdir" != xno; then fi AM_CONDITIONAL(HAVE_SYSTEMD, [test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ]) -AC_ARG_WITH(ASOUND_STATE_DIR, +AC_ARG_WITH([asound-state-dir], AS_HELP_STRING([--with-asound-state-dir=DIR], [Directory to place asound.state file in]), [ASOUND_STATE_DIR="$withval"], [ASOUND_STATE_DIR="/var/lib/alsa"]) -- 1.7.2.1

2 1

Re: [alsa-devel] ALSA Multichannel through HDMI
by John Ettedgui 26 Nov '10

26 Nov '10

On Thu, Nov 25, 2010 at 3:34 PM, John Ettedgui <john.ettedgui(a)gmail.com> wrote: > On Thu, Nov 25, 2010 at 3:15 PM, Anssi Hannula <anssi.hannula(a)iki.fi> wrote: >> On 26.11.2010 01:11, John Ettedgui wrote: >>> On Thu, Nov 25, 2010 at 2:58 PM, Anssi Hannula <anssi.hannula(a)iki.fi> wrote: >>>> On 26.11.2010 00:42, John Ettedgui wrote: >>>>> On Thu, Nov 25, 2010 at 11:19 AM, Anssi Hannula <anssi.hannula(a)iki.fi> wrote: >>>>>> On 25.11.2010 14:21, John Ettedgui wrote: >>>>>>> On Thu, Nov 25, 2010 at 3:40 AM, Anssi Hannula <anssi.hannula(a)iki.fi> wrote: >>>>>>>> On 25.11.2010 13:09, John Ettedgui wrote: >>>>>>>>> On Thu, Nov 25, 2010 at 2:49 AM, Anssi Hannula <anssi.hannula(a)iki.fi> wrote: >>>>>>>>>> On 25.11.2010 06:12, John Ettedgui wrote: >>>>>>>>>>> I'm actually trying to get a 5.1 setup working without passthrough, if >>>>>>>>>>> I use mplayer with passthrough my receiver behaves just fine, but I am >>>>>>>>>>> trying to send the 6 channels from the computer. >>>>>>>>>>> >>>>>>>>>>> I was actually told that the current ALSA driver for radeon's hdmi >>>>>>>>>>> does not support more than 2 channels, and that would explain why I'm >>>>>>>>>>> getting this behavior. Is that true though? >>>>>>>>>> >>>>>>>>>> Yes. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> However, strangely your log output seems to show the intel's hdmi parser >>>>>>>>>> being used instead: >>>>>>>>>> >>>>>>>>>>> ALSA sound/pci/hda/patch_intelhdmi.c:842: hdmi_setup_stream: NID=0x2, >>>>>>>>>>> stream=0x1, new-format=0x11 >>>>>>>>>> >>>>>>>>>> Were you just trying some patch at the time? >>>>>>>>> >>>>>>>>> yes Wu gave me a patch to try against the kernel, I'm guessing this is >>>>>>>>> the reason you see something unexpected. >>>>>>>> >>>>>>>> Did 6 channels work with that patch? (possibly with a wrong channel order) >>>>>>> Not any better as far as I remember. >>>>>> >>>>>> OK. Did 2 channel audio continue to work with it? >>>>>> >>>>>> If you are not sure, here's the patch doing the same thing against >>>>>> current alsa driver: >>>>>> http://stuff.onse.fi/0001-ALSA-hda-Use-generic-HDMI-code-for-ATI-HDMI-codec… >>>>>> >>>>>> Confirming that would help (it would allow to switch the ATI chip to use >>>>>> the generic parser instead of the ATI-specific one), though not with the >>>>>> multichannel issue (see below). >>>>>> >>>>>> [...] >>>>>> >>>>>>>>> Since I just moved to jack/rca cables I'm in no hurry anymore, but is >>>>>>>>> there any reason why the driver cannot work with more than 2 channels? >>>>>>>> >>>>>>>> I don't really know (it is simply not implemented). >>>>>>> Alright. >>>>>>>> >>>>>>>>> Anything I could do to help with that? >>>>>>>> >>>>>>>> Possibly. But see above, so that we won't try the same things you >>>>>>>> already tried :) >>>>>>>> >>>>>>> Sure :) >>>>>> >>>>>> Looking again at the the alsa info output you provided, I don't think I >>>>>> have any great ideas. It looks like the chip simply reports that it >>>>>> supports a maximum of 2 channels. >>>>>> >>>>>> One option could be hardcoding "chans = 8;" in generic_hdmi_build_pcms() >>>>>> in sound/pci/hda/patch_hdmi.c (assuming you have the above patch and 2 >>>>>> channel audio works with it). However, I find it rather unlikely that it >>>>>> would make any difference. >>>>>> >>>>>> -- >>>>>> Anssi Hannula >>>>>> >>>>> >>>>> Anssi, >>>>> the patch fails on my kernel, I cannot find the hda_codec_preset >>>>> manually in there either. >>>>> Did you want me to try that against a 2.6.37 rc instead of a 2.6.36? >>>> >>>> For 2.6.36 I think you can just use your earlier patch. >>>> >>>> Note that on that kernel generic_hdmi_build_pcms() is >>>> intel_hdmi_build_pcms() in patch_intelhdmi.c. >>>> >>> ok >>>> BTW, I've just been informed by another ATI user that his card was >>>> actually stereo-only, while he thought earlier it was multichannel >>>> capable. So, are you sure your card is a multichannel one? >>>> (if not, it would explain why the card says it is not) >>>> >>>> -- >>>> Anssi Hannula >>>> >>> Yes, it works fine in Window so I believe the hardware part is good. >> >> And you are sure it is multichannel PCM, and not e.g. multichannel DTS >> or multichannel AC-3 with on-the-fly compression, which are possible >> with stereo hdmi as well? >> >> Just making sure :) >> >> -- >> Anssi Hannula >> > > Well, I have not super tested it, but the reason I believe it is is > simple, when I use passthrough my receiver says Dolby digital or > something like that, but in Windows just going around or playing games > it says Multichannel. > > I'll get the patch applied in a few minutes, I was running out of > memory and my system was getting really slow... :) > I am not sure if I did it right but now I don't even get hdmi sound working anymore. It is not listed in aplay-l, and dmesg gives me this: [drm:radeon_dvi_detect] *ERROR* HDMI Type A-1: probed a monitor but no|invalid EDID I've attached the patch I used, since I could not used the previous one I had to hack it, maybe I broke something? (I have not set channels to 8 yet, just changed the parser) Thanks, John

2 5

Re: [alsa-devel] ALSA Multichannel through HDMI
by John Ettedgui 26 Nov '10

26 Nov '10

On Tue, Jan 12, 2010 at 9:02 PM, Wu Fengguang <fengguang.wu(a)intel.com> wrote: > On Wed, Jan 13, 2010 at 12:55:09PM +0800, John Ettedgui wrote: >> On Tue, Jan 12, 2010 at 8:52 PM, Wu Fengguang <fengguang.wu(a)intel.com> wrote: >> > On Wed, Jan 13, 2010 at 12:48:13PM +0800, John Ettedgui wrote: >> >> On Tue, Jan 12, 2010 at 5:45 PM, Wu Fengguang <fengguang.wu(a)intel.com> wrote: >> >> > On Wed, Jan 13, 2010 at 09:32:04AM +0800, John Ettedgui wrote: >> >> >> On Tue, Jan 12, 2010 at 5:09 PM, Wu Fengguang <fengguang.wu(a)intel.com> wrote: >> >> > >> >> >> >> > You can play a 5.1 track and find something like this in dmesg: >> >> >> >> > >> >> >> >> > HDMI: ASP channel %d => slot %d >> >> >> >> > HDMI: ASP channel %d => slot %d >> >> >> >> > HDMI: ASP channel %d => slot %d >> >> >> >> > HDMI: ASP channel %d => slot %d >> >> >> >> > HDMI: ASP channel %d => slot %d >> >> >> >> > HDMI: ASP channel %d => slot %d >> >> >> >> > HDMI: ASP channel %d => slot %d >> >> >> >> > HDMI: ASP channel %d => slot %d >> >> >> >> > >> >> >> >> After trying speaker-test -c6, I could not find anything like that. >> >> >> >> If I try mplayer -channel 6, it just does not output any sound. >> >> >> > >> >> >> > Did you enable CONFIG_SND_DEBUG_VERBOSE? >> >> >> > >> >> >> >> >> >> Yes. >> >> > >> >> > Then we need more debugging.. >> >> > >> >> > Can you send me the file /proc/asound/card*/eld*? >> >> Attached to this email >> >> > And the alsainfo output: >> >> > http://www.alsa-project.org/alsa-info.sh >> >> and this one is at >> >> http://www.alsa-project.org/db/?f=59773f9117f653f3d20d21b90dc2104eeb5d1ecd >> > >> > John, please try this and then redo speaker-test and check dmesg: >> > >> > # echo monitor_present 1 > /proc/asound/card*/eld* >> > >> > Thanks, >> > Fengguang >> > >> Alright, I guess this is the output we are looking for: >> >> >> ALSA sound/pci/hda/patch_intelhdmi.c:842: hdmi_setup_stream: NID=0x2, >> stream=0x1, new-format=0x11 >> ALSA sound/pci/hda/hda_intel.c:1641: azx_pcm_prepare: bufsize=0x10000, >> format=0x11 >> HDMI: ASP channel 0 => slot 0 >> HDMI: ASP channel 0 => slot 0 >> HDMI: ASP channel 0 => slot 0 >> HDMI: ASP channel 0 => slot 0 >> HDMI: ASP channel 0 => slot 0 >> HDMI: ASP channel 0 => slot 0 >> HDMI: ASP channel 0 => slot 0 >> HDMI: ASP channel 0 => slot 0 > > Oh well, I guess your hardware doesn't support channel mapping.. > > You can still do it in user space: > http://article.gmane.org/gmane.linux.alsa.user/33393 > > Thanks, > Fengguang > I am sorry to resurrect this thread after so long, but I still have not been able to get anywhere. Also it just came to my attention that if my receiver always sees the hdmi connection as stereo (apart from when using ac3/dts passthrough) channel remapping is not the solution, but somehow something else is messed up. I think I should try some options in modprobe.conf for snd-hda-intel but I am not sure which ones, and from all the examples I can find on the web, it seems none of them are talking about a radeon hdmi connection... So I'm asking for advice here again :) Thanks!

3 13

Re: [alsa-devel] terrible sound from my ALC850 / 880 [Alsa driver version 1.0.21] debian ( squeeze )
by Colin Kincaid Williams 26 Nov '10

26 Nov '10

On Wed, Nov 24, 2010 at 12:12 AM, Colin Kincaid Williams <discord(a)uw.edu> wrote: > Hello, > > I'm experiencing crap sound preformance from my ALC 850/880 chipset. > I'm first wondering if their is a way to set the model other than the > /etc/modprobe.d/alsa-base.conf file? Can I try different models > without rebooting? So far I've tried the model 6stack, since that > sounds like what I have on my motherboard. Furthermore, does anybody > have any ideas on what else I can do so that my computer can sound at > least as good as my $20 coby mp3 player? > > > cat /proc/asound/version > Advanced Linux Sound Architecture Driver Version 1.0.21. > > > > The output from lspci : > > > 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition > Audio [10de:026c] (rev a2) > Subsystem: Giga-byte Technology Device [1458:a102] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (500ns min, 1250ns max) > Interrupt: pin B routed to IRQ 22 > Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ > Address: 0000000000000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ > Kernel driver in use: HDA Intel >

1 0

[alsa-devel] Alsa-user list down
by Colin Kincaid Williams 26 Nov '10

26 Nov '10

I've tried subscribing to the Alsa-user list and get no response, it seems that the list is down.

1 0

[alsa-devel] [PATCH] ASoC: tlv320aic3x - fix variable may be used uninitialized warning
by Axel Lin 25 Nov '10

25 Nov '10

If aic3x_read failed , val is used uninitialized. Fix it by initializing val to 0. This patch fixes below compile warning: sound/soc/codecs/tlv320aic3x.c: In function 'aic3x_get_gpio': sound/soc/codecs/tlv320aic3x.c:1183: warning: 'val' may be used uninitialized in this function sound/soc/codecs/tlv320aic3x.c: In function 'aic3x_headset_detected': sound/soc/codecs/tlv320aic3x.c:1211: warning: 'val' may be used uninitialized in this function sound/soc/codecs/tlv320aic3x.c: In function 'aic3x_button_pressed': sound/soc/codecs/tlv320aic3x.c:1219: warning: 'val' may be used uninitialized in this function Signed-off-by: Axel Lin <axel.lin(a)gmail.com> --- sound/soc/codecs/tlv320aic3x.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index bfd036a..9de7c38 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1180,7 +1180,7 @@ EXPORT_SYMBOL_GPL(aic3x_set_gpio); int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio) { u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG; - u8 val, bit = gpio ? 2: 1; + u8 val = 0, bit = gpio ? 2 : 1; aic3x_read(codec, reg, &val); return (val >> bit) & 1; @@ -1208,7 +1208,7 @@ EXPORT_SYMBOL_GPL(aic3x_set_headset_detection); int aic3x_headset_detected(struct snd_soc_codec *codec) { - u8 val; + u8 val = 0; aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val); return (val >> 4) & 1; } @@ -1216,7 +1216,7 @@ EXPORT_SYMBOL_GPL(aic3x_headset_detected); int aic3x_button_pressed(struct snd_soc_codec *codec) { - u8 val; + u8 val = 0; aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val); return (val >> 5) & 1; } -- 1.7.2

2 2

[alsa-devel] [PATCH 2/2 RESEND] ASoC: Fix resource reclaim for osk5912
by Axel Lin 25 Nov '10

25 Nov '10

In current implementation, there are resources leak in the error path. This patch properly reclaims the allocated resources in the error path. Also adds a missing clk_put in osk_soc_exit. Signed-off-by: Axel Lin <axel.lin(a)gmail.com> Acked-by: Jarkko Nikula <jhnikula(a)gmail.com> --- sound/soc/omap/osk5912.c | 11 ++++++++--- 1 files changed, 8 insertions(+), 3 deletions(-) diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c index 18d053d..7e75e77 100644 --- a/sound/soc/omap/osk5912.c +++ b/sound/soc/omap/osk5912.c @@ -177,7 +177,8 @@ static int __init osk_soc_init(void) tlv320aic23_mclk = clk_get(dev, "mclk"); if (IS_ERR(tlv320aic23_mclk)) { printk(KERN_ERR "Could not get mclk clock\n"); - return -ENODEV; + err = PTR_ERR(tlv320aic23_mclk); + goto err2; } /* @@ -188,7 +189,7 @@ static int __init osk_soc_init(void) if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) { printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n"); err = -ECANCELED; - goto err1; + goto err3; } } @@ -196,9 +197,12 @@ static int __init osk_soc_init(void) (uint) clk_get_rate(tlv320aic23_mclk), CODEC_CLOCK); return 0; -err1: + +err3: clk_put(tlv320aic23_mclk); +err2: platform_device_del(osk_snd_device); +err1: platform_device_put(osk_snd_device); return err; @@ -207,6 +211,7 @@ err1: static void __exit osk_soc_exit(void) { + clk_put(tlv320aic23_mclk); platform_device_unregister(osk_snd_device); } -- 1.7.2

2 1

[PATCH] alsactl: Add a --with-udev-rules-dir configure option.
by Colin Guthrie 25 Nov '10

25 Nov '10

After the previous patch to install udev rules it is impossible to do a non-root, custom-prefix make install. This is generally not a problem when building official packages but it can be a pain for developers and debuggers etc. This is essentially the same patch as was already made in PulseAudio in commit e8a5746f2fcae59bfd18d39b621509b3ef130453. --- alsactl/Makefile.am | 2 -- configure.in | 6 ++++++ 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/alsactl/Makefile.am b/alsactl/Makefile.am index 721b619..5cfc415 100644 --- a/alsactl/Makefile.am +++ b/alsactl/Makefile.am @@ -11,8 +11,6 @@ alsactl_SOURCES=alsactl.c state.c utils.c init_parse.c alsactl_CFLAGS=$(AM_CFLAGS) -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\" noinst_HEADERS=alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c -udevrulesdir=/lib/udev/rules.d - dist_udevrules_DATA = \ 90-alsa-restore.rules diff --git a/configure.in b/configure.in index 94a2b17..5b3491d 100644 --- a/configure.in +++ b/configure.in @@ -112,6 +112,12 @@ if test x"$alsaconf" = xtrue; then fi AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes) +AC_ARG_WITH( + [udev-rules-dir], + AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]), + [udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"]) +AC_SUBST(udevrulesdir) + dnl Checks for header files. AC_HEADER_STDC if test x$alsamixer = xtrue; then -- 1.7.3.2 --------------050704060108030906000201--

1 0

[alsa-devel] [PATCH 2.6.37-rc1] ASoC: OMAP: fix OMAP1 compilation problem
by Janusz Krzysztofik 25 Nov '10

25 Nov '10

In the new code introduced with commit cf4c87abe238ec17cd0255b4e21abd949d7f811e, "OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c", the way omap1 build is supposed to bypass omap2 specific functionality doesn't optimize out all omap2 specific stuff. This breaks linking phase for omap1 machines, giving "undefined reference to `omap2_mcbsp1_mux_clkr_src'" and "undefined reference to `omap2_mcbsp1_mux_fsr_src'" errors. Fix it. Created and tested against linux-2.6.37-rc1. Signed-off-by: Janusz Krzysztofik <jkrzyszt(a)tis.icnet.pl> --- sound/soc/omap/omap-mcbsp.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- linux-2.6.37-rc1/sound/soc/omap/omap-mcbsp.c.orig 2010-11-01 22:43:16.000000000 +0100 +++ linux-2.6.37-rc1/sound/soc/omap/omap-mcbsp.c 2010-11-02 15:41:42.000000000 +0100 @@ -644,15 +644,23 @@ static int omap_mcbsp_dai_set_dai_sysclk case OMAP_MCBSP_CLKR_SRC_CLKR: + if (cpu_class_is_omap1()) + break; omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKR); break; case OMAP_MCBSP_CLKR_SRC_CLKX: + if (cpu_class_is_omap1()) + break; omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKX); break; case OMAP_MCBSP_FSR_SRC_FSR: + if (cpu_class_is_omap1()) + break; omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSR); break; case OMAP_MCBSP_FSR_SRC_FSX: + if (cpu_class_is_omap1()) + break; omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSX); break; default:

6 14

[alsa-devel] [PATCH] ASoC: neo1973_gta02_wm8753: fix wrong parameter for snd_soc_register_dai and snd_soc_unregister_dai
by Axel Lin 25 Nov '10

25 Nov '10

Signed-off-by: Axel Lin <axel.lin(a)gmail.com> --- sound/soc/samsung/neo1973_gta02_wm8753.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c index 920e8d1..8c65b63 100644 --- a/sound/soc/samsung/neo1973_gta02_wm8753.c +++ b/sound/soc/samsung/neo1973_gta02_wm8753.c @@ -438,7 +438,7 @@ static int __init neo1973_gta02_init(void) return -ENOMEM; /* register bluetooth DAI here */ - ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, -1, &bt_dai); + ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, &bt_dai); if (ret) { platform_device_put(neo1973_gta02_snd_device); return ret; @@ -491,7 +491,7 @@ module_init(neo1973_gta02_init); static void __exit neo1973_gta02_exit(void) { - snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev, -1); + snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev); platform_device_unregister(neo1973_gta02_snd_device); gpio_free(GTA02_GPIO_HP_IN); gpio_free(GTA02_GPIO_AMP_SHUT); -- 1.7.2

3 2

[alsa-devel] [PATCH] ASoC: Fix compile error for smartq_wm8987.c
by Axel Lin 25 Nov '10

25 Nov '10

Fix below compile error: CC sound/soc/samsung/smartq_wm8987.o sound/soc/samsung/smartq_wm8987.c: In function 'smartq_hifi_hw_params': sound/soc/samsung/smartq_wm8987.c:42: error: 'struct snd_soc_pcm_runtime' has no member named 'dai' sound/soc/samsung/smartq_wm8987.c:43: error: 'struct snd_soc_pcm_runtime' has no member named 'dai' sound/soc/samsung/smartq_wm8987.c: In function 'smartq_wm8987_init': sound/soc/samsung/smartq_wm8987.c:192: warning: passing argument 1 of 'snd_soc_jack_new' from incompatible pointer type sound/soc/samsung/smartq_wm8987.c: At top level: sound/soc/samsung/smartq_wm8987.c:216: warning: initialization from incompatible pointer type make[3]: *** [sound/soc/samsung/smartq_wm8987.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin(a)gmail.com> --- sound/soc/samsung/smartq_wm8987.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c index d6a340b8..0a46fa8 100644 --- a/sound/soc/samsung/smartq_wm8987.c +++ b/sound/soc/samsung/smartq_wm8987.c @@ -39,8 +39,8 @@ static int smartq_hifi_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; unsigned int clk = 0; int ret; @@ -153,8 +153,9 @@ static const struct snd_soc_dapm_route audio_map[] = { {"LINPUT2", NULL, "Mic Bias"}, }; -static int smartq_wm8987_init(struct snd_soc_codec *codec) +static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd) { + struct snd_soc_codec *codec = rtd->codec; struct snd_soc_dapm_context *dapm = &codec->dapm; int err = 0; @@ -188,7 +189,7 @@ static int smartq_wm8987_init(struct snd_soc_codec *codec) return err; /* Headphone jack detection */ - err = snd_soc_jack_new(&snd_soc_smartq, "Headphone Jack", + err = snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE, &smartq_jack); if (err) return err; -- 1.7.2

3 2

[alsa-devel] [PATCH 0/8] ASoC: fix resource leak in error paths
by Axel Lin 25 Nov '10

25 Nov '10

This serial of patches fix resource leak in error paths. Axel Lin (8): ASoC: efika-audio-fabric: fix resource leak in efika_fabric_init error path ASoC: pcm030-audio-fabric: fix resource leak in pcm030_fabric_init error path ASoC: snd-soc-afeb9260: remove unneeded platform_device_del in error path ASoC: sam9g20_wm8731: fix resource leak in at91sam9g20ek_init error path ASoC: smdk_wm9713: fix resource leak in smdk_init error path ASoC: simone: fix resource leak in simone_init error path ASoC: imx-ssi: fix resource leak ASoC: phycore-ac97: fix resource leak sound/soc/atmel/sam9g20_wm8731.c | 5 ++++- sound/soc/atmel/snd-soc-afeb9260.c | 1 - sound/soc/ep93xx/simone.c | 18 ++++++++++-------- sound/soc/fsl/efika-audio-fabric.c | 1 + sound/soc/fsl/pcm030-audio-fabric.c | 1 + sound/soc/imx/imx-ssi.c | 15 +++++++++++---- sound/soc/imx/phycore-ac97.c | 28 +++++++++++++++++++++------- sound/soc/samsung/smdk_wm9713.c | 17 ++++++++++------- 8 files changed, 58 insertions(+), 28 deletions(-) -- 1.7.2

5 13

[alsa-devel] [PATCH] ASoC: fix SND_PXA2XX_LIB Kconfig warning
by Dmitry Artamonow 25 Nov '10

25 Nov '10

Fix following warning observed when SND_PXA2XX_SOC is set and SND_ARM isn't: warning: (SND_PXA2XX_AC97 && SOUND && !M68K && SND && SND_ARM && ARCH_PXA || SND_PXA2XX_SOC && SOUND && !M68K && SND && SND_SOC && ARCH_PXA) selects SND_PXA2XX_LIB which has unmet direct dependencies (SOUND && !M68K && SND && SND_ARM) Signed-off-by: Dmitry Artamonow <mad_soft(a)inbox.ru> --- This is fix for 2.6.37-rc3 sound/soc/pxa/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 37f191b..580f485 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -1,6 +1,7 @@ config SND_PXA2XX_SOC tristate "SoC Audio for the Intel PXA2xx chip" depends on ARCH_PXA + select SND_ARM select SND_PXA2XX_LIB help Say Y or M if you want to add support for codecs attached to -- 1.7.0.4

3 2

[alsa-devel] [PATCH] ASoC: davinci-vcif - fix a memory leak
by Axel Lin 25 Nov '10

25 Nov '10

Signed-off-by: Axel Lin <axel.lin(a)gmail.com> --- sound/soc/davinci/davinci-vcif.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/davinci/davinci-vcif.c index fb4cc1e..9d2afcc 100644 --- a/sound/soc/davinci/davinci-vcif.c +++ b/sound/soc/davinci/davinci-vcif.c @@ -247,7 +247,10 @@ fail: static int davinci_vcif_remove(struct platform_device *pdev) { + struct davinci_vcif_dev *davinci_vcif_dev = dev_get_drvdata(&pdev->dev); + snd_soc_unregister_dai(&pdev->dev); + kfree(davinci_vcif_dev); return 0; } -- 1.7.2

3 2

[alsa-devel] [PATCH] ASoC: Call snd_soc_unregister_dais instead of snd_soc_unregister_dai in sh4_soc_dai_remove
by Axel Lin 25 Nov '10

25 Nov '10

We call snd_soc_register_dais() in sh4_soc_dai_probe(), thus we should call snd_soc_unregister_dais() in sh4_soc_dai_remove(). Otherwise, we got "too many arguments to function 'snd_soc_unregister_dai'" error message. Signed-off-by: Axel Lin <axel.lin(a)gmail.com> --- sound/soc/sh/ssi.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c index 40bbdf1..05192d9 100644 --- a/sound/soc/sh/ssi.c +++ b/sound/soc/sh/ssi.c @@ -387,7 +387,7 @@ static int __devinit sh4_soc_dai_probe(struct platform_device *pdev) static int __devexit sh4_soc_dai_remove(struct platform_device *pdev) { - snd_soc_unregister_dai(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai)); + snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai)); return 0; } -- 1.7.2

3 2

[alsa-devel] [PATCH] ASoC: Update MAINTAINERS for Samsung driver move
by Mark Brown 25 Nov '10

25 Nov '10

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- MAINTAINERS | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 33a4091..e585c6a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5133,7 +5133,7 @@ SAMSUNG AUDIO (ASoC) DRIVERS M: Jassi Brar <jassi.brar(a)samsung.com> L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) S: Supported -F: sound/soc/s3c24xx +F: sound/soc/samsung TLG2300 VIDEO4LINUX-2 DRIVER M: Huang Shijie <shijie8(a)gmail.com> -- 1.7.1

3 2

[alsa-devel] [PATCH] ASoC: Make SMDK WM8580 driver unloadable
by Mark Brown 25 Nov '10

25 Nov '10

Supply a module exit function so that the driver can be unloaded. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/samsung/smdk_wm8580.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c index 0ae3d57..e2d56b9 100644 --- a/sound/soc/samsung/smdk_wm8580.c +++ b/sound/soc/samsung/smdk_wm8580.c @@ -280,6 +280,12 @@ static int __init smdk_audio_init(void) } module_init(smdk_audio_init); +static void __exit smdk_audio_exit(void) +{ + platform_device_unregister(smdk_snd_device); +} +module_exit(smdk_audio_exit); + MODULE_AUTHOR("Jaswinder Singh, jassi.brar(a)samsung.com"); MODULE_DESCRIPTION("ALSA SoC SMDK WM8580"); MODULE_LICENSE("GPL"); -- 1.7.1

3 2

[alsa-devel] [PATCH] ALSA: hda - Fix ALC660-VD/ALC861-VD capture/playback mixers
by Herton Ronaldo Krzesinski 25 Nov '10

25 Nov '10

The mixer nids passed to alc_auto_create_input_ctls are wrong: 0x15 is a pin, and 0x09 is the ADC on both ALC660-VD/ALC861-VD. Thus with current code, input playback volume/switches and input source mixer controls are not created, and recording doesn't work. Select correct mixers, 0x0b (input playback mixer) and 0x22 (capture source mixer). Reference: https://qa.mandriva.com/show_bug.cgi?id=61159 Signed-off-by: Herton Ronaldo Krzesinski <herton(a)mandriva.com.br> --- sound/pci/hda/patch_realtek.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b4b3afe..5aafae9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -16952,7 +16952,7 @@ static struct alc_config_preset alc861vd_presets[] = { static int alc861vd_auto_create_input_ctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg) { - return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0); + return alc_auto_create_input_ctls(codec, cfg, 0x0b, 0x22, 0); } -- 1.7.3.2

2 1

Re: [alsa-devel] [PATCH 5/8] ASoC: smdk_wm9713: fix resource leak in smdk_init error path
by JASWINDERSINGH BRAR 25 Nov '10

25 Nov '10

------- Original Message ------- Sender : Axel Lin<axel.lin(a)gmail.com> Date : Nov 25, 2010 16:11 (GMT+09:00) Title : [PATCH 5/8] ASoC: smdk_wm9713: fix resource leak in smdk_init error path > Fix the error path to properly free allocated resources. Acked-by: Jassi Brar <jassi.brar(a)samsung.com>

1 0

[alsa-devel] asoc register read/write calls
by Koul, Vinod 25 Nov '10

25 Nov '10

Mark, In the asoc framework, do the codec register read-write calls need to be atomic? Will it work in non-atomic context? ~Vinod

2 2

[alsa-devel] [PATCH] ASoC: Add WM8737 ALC support
by Mark Brown 24 Nov '10

24 Nov '10

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8737.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 42 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/wm8737.c b/sound/soc/codecs/wm8737.c index a325fe6..2301338 100644 --- a/sound/soc/codecs/wm8737.c +++ b/sound/soc/codecs/wm8737.c @@ -78,6 +78,8 @@ static const unsigned int micboost_tlv[] = { static const DECLARE_TLV_DB_SCALE(pga_tlv, -9750, 50, 1); static const DECLARE_TLV_DB_SCALE(adc_tlv, -600, 600, 0); static const DECLARE_TLV_DB_SCALE(ng_tlv, -7800, 600, 0); +static const DECLARE_TLV_DB_SCALE(alc_max_tlv, -1200, 600, 0); +static const DECLARE_TLV_DB_SCALE(alc_target_tlv, -1800, 100, 0); static const char *micbias_enum_text[] = { "25%", @@ -103,6 +105,38 @@ static const char *high_cutoff_text[] = { static const struct soc_enum high_3d = SOC_ENUM_SINGLE(WM8737_3D_ENHANCE, 5, 2, high_cutoff_text); +static const char *alc_fn_text[] = { + "Disabled", "Right", "Left", "Stereo" +}; + +static const struct soc_enum alc_fn = + SOC_ENUM_SINGLE(WM8737_ALC1, 7, 4, alc_fn_text); + +static const char *alc_hold_text[] = { + "0", "2.67ms", "5.33ms", "10.66ms", "21.32ms", "42.64ms", "85.28ms", + "170.56ms", "341.12ms", "682.24ms", "1.364s", "2.728s", "5.458s", + "10.916s", "21.832s", "43.691s" +}; + +static const struct soc_enum alc_hold = + SOC_ENUM_SINGLE(WM8737_ALC2, 0, 16, alc_hold_text); + +static const char *alc_atk_text[] = { + "8.4ms", "16.8ms", "33.6ms", "67.2ms", "134.4ms", "268.8ms", "537.6ms", + "1.075s", "2.15s", "4.3s", "8.6s" +}; + +static const struct soc_enum alc_atk = + SOC_ENUM_SINGLE(WM8737_ALC3, 0, 11, alc_atk_text); + +static const char *alc_dcy_text[] = { + "33.6ms", "67.2ms", "134.4ms", "268.8ms", "537.6ms", "1.075s", "2.15s", + "4.3s", "8.6s", "17.2s", "34.41s" +}; + +static const struct soc_enum alc_dcy = + SOC_ENUM_SINGLE(WM8737_ALC3, 4, 11, alc_dcy_text); + static const struct snd_kcontrol_new wm8737_snd_controls[] = { SOC_DOUBLE_R_TLV("Mic Boost Volume", WM8737_AUDIO_PATH_L, WM8737_AUDIO_PATH_R, 6, 3, 0, micboost_tlv), @@ -132,6 +166,14 @@ SOC_SINGLE_TLV("3D ADC Volume", WM8737_3D_ENHANCE, 7, 1, 1, adc_tlv), SOC_SINGLE("Noise Gate Switch", WM8737_NOISE_GATE, 0, 1, 0), SOC_SINGLE_TLV("Noise Gate Threshold Volume", WM8737_NOISE_GATE, 2, 7, 0, ng_tlv), + +SOC_ENUM("ALC", alc_fn), +SOC_SINGLE_TLV("ALC Max Gain Volume", WM8737_ALC1, 4, 7, 0, alc_max_tlv), +SOC_SINGLE_TLV("ALC Target Volume", WM8737_ALC1, 0, 15, 0, alc_target_tlv), +SOC_ENUM("ALC Hold Time", alc_hold), +SOC_SINGLE("ALC ZC Switch", WM8737_ALC2, 4, 1, 0), +SOC_ENUM("ALC Attack Time", alc_atk), +SOC_ENUM("ALC Decay Time", alc_dcy), }; static const char *linsel_text[] = { -- 1.7.1

1 0

[alsa-devel] no support for docking station with acl259?
by Oliver Bestmann 24 Nov '10

24 Nov '10

hey, i have an hda-intel card with an acl259 chipset. everything works fine except the in and output jacks on the docking station. they arent recognized by alsa and the dont show up in alsamixer. i'm jusing the drivers from the current kernel 2.6.37-rc3. i'd like to provide every necassary information to help someone to fix this problem or, if someone could tell me how, i'd try fixing it myself. cheers, olli -- Oliver Bestmann <7bestman(a)informatik.uni-hamburg.de>

1 0

Re: [alsa-devel] [Alsa-user] Creative Sound Blaster Audigy SE Mic problem
by Bill Unruh 24 Nov '10

24 Nov '10

On Wed, 24 Nov 2010, Grega Fajdiga wrote: > Hello, > > I am using Ubuntu 10.10 with a Creative Sound Blaster Audigy SE. > > The snd_ca0106 module is loaded. > > I have a Y-connector plugged in the green front left/right jack > so that I can listen at the sound through speakers and the > headphones at the same time. The microphone is plugged into the > blue jack, consistent with the sound card specs: > > http://pdfguides.com/creative-labs-sound-blaster-audigy-se-features-specifi… > > I go the sound working after getting a tip that both the digital > and analog mixer might be turned on. After turning the digital > control off, sound started to work. > > However, mic still isn't working in Linux, although it works just > fine in Win 7. > > There are 7 input mixers available in alsamixer: > > -Line-in: set at 81/81 volume > -Mic: 100/100 > -Phone 81/81 > -Aux: 0/0 > -Analog Source: set to Mic (no VU meter) > -Digital Source: set to AC97 in (cannot seem to be muted) > -Shared Mic/Line in set to Line in > > If I set both Analog Source and Shared Mic/Line in to Mic, I get > screeching sounds from speakers and headphones. If I set one of That is probably what is called feedback.i It says yor microphone works. Unplug your headphones/speakers. Ie, turn off all output. So set both to Mic. Now record. Once you have recorded Turn off the inputs. and see if there is some recording. Or use something like audacity and look at the input meter. > them to Line in and one to Mic no sound is played back after I > record some sound. > > Can anyone help? > > Thanks, > -- William G. Unruh | Canadian Institute for| Tel: +1(604)822-3273 Physics&Astronomy | Advanced Research | Fax: +1(604)822-5324 UBC, Vancouver,BC | Program in Cosmology | unruh(a)physics.ubc.ca Canada V6T 1Z1 | and Gravity | www.theory.physics.ubc.ca/

1 0

[alsa-devel] [PATCH] ALSA: HDA: Add an extra DAC for Realtek ALC887-VD
by David Henningsson 24 Nov '10

24 Nov '10

After Kailang's patch for ALC887-VD, that makes it take the patch_alc662 code path, I needed to add this patch to make headphones work. The codec-proc for that machine is attached. The patch enables ALC887-VD to use the DAC at nid 0x26, which makes it possible to use this DAC to control Headphone volume. -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 1

[alsa-devel] ASoC updates for 2.6.38
by Mark Brown 24 Nov '10

24 Nov '10

The following changes since commit 2ab46c9390e74368a38ddb5aa525124518df8b69: Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc (2010-11-23 12:45:05 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.38 Bigger than usual set due to Jarkko's removal of header inclusions (which touched a lot of files) and Jassi's Samsung driver reworking. Axel Lin (10): ASoC: stac9766 - set reg_cache_default to stac9766_reg ASoC: Fix a memory leak in alc5623_i2c_probe error path ASoC: Do not update the cache if write to hardware failed ASoC: max98088 - fix a memory leak ASoC: wm8904 - fix memory leaks ASoC: wm8994 - fix memory leaks ASoC: wm8961 - clear WM8961_DACSLOPE bit for normal mode ASoC: wm8961 - clear WM8961_MCLKDIV bit for freq <= 16500000 ASoC: Return proper error for omap3pandora_soc_init ASoC: nuc900-ac97: fix a memory leak Janusz Krzysztofik (1): ASoC: OMAP: fix OMAP1 compilation problem Jarkko Nikula (4): ASoC: Fix compile breakage in jz4740.c and smartq_wm8987.c ASoC: Do not include soc-dapm.h ASoC: Do not include soc-dai.h ASoC: Remove cyclic dependency between soc.h and soc-dapm.h/soc-dai.h Jassi Brar (18): ASoC: Samsung: Remove redundant AQUILA driver ASoC: Samsung: Rename DMA device ARM: Samsung: Define common audio-dma device ASoC: Samsung: Rename ASoC DMA driver ASoC: Samsung: Rename AC97 platform device ASoC: Samsung: Rename AC97 driver ASoC: Samsung: Rename PCM driver ASoC: Samsung: Generalize DMA driver namespace ASoC: Samsung: Rename s3c64xx I2S device ASoC: Samsung: Add common I2S driver ASoC: SMARTQ: Move to use new I2S driver ASoC: GONI: Move to use new I2S driver ASoC: SMDK64XX: Move to use new I2S driver ASoC: S3C64XX: Remove obsoleted I2S drivers ASoC: SMDK64XX: Rename for other platforms ASoC: SMDK_WM8580: Enable for SMDKC100 ASoC: Samsung: Generalize Kconfig symbols ASoC: Samsung: Rename from s3c24xx to samsung Jesper Juhl (1): ASoC: MPC5200: Eliminate duplicate include of of_device.h Liam Girdwood (1): Merge commit 'v2.6.37-rc1' into for-2.6.37 Mark Brown (8): ASoC: Fix multi-component mismerge in WM8523 ASoC: Restore WM8994 volatile and readable register operations Merge branch 'for-2.6.37' into for-2.6.38 Merge branch 'for-2.6.37' into for-2.6.38 Merge branch 'fix/asoc' of git://git.kernel.org/.../tiwai/sound-2.6 into for-2.6.37 Merge branch 'topic/asoc' of git://git.kernel.org/.../tiwai/sound-2.6 into for-2.6.38 ASoC: Add initial WM8737 driver Merge branch 'for-2.6.37' into for-2.6.38 Takashi Iwai (1): Merge branch 'for-2.6.37' of git://git.kernel.org/.../lrg/asoc-2.6 into fix/asoc Vasiliy Kulikov (2): ASoC: s3c24xx: test wrong variable ASoC: atmel: test wrong variable arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2440/mach-rx1950.c | 2 +- arch/arm/mach-s3c64xx/dev-audio.c | 15 +- arch/arm/mach-s3c64xx/mach-smdk6410.c | 2 +- arch/arm/mach-s5pc100/dev-audio.c | 2 +- arch/arm/mach-s5pc100/mach-smdkc100.c | 2 + arch/arm/mach-s5pv210/dev-audio.c | 2 +- arch/arm/plat-s3c24xx/devs.c | 19 +- arch/arm/plat-samsung/Makefile | 1 + arch/arm/plat-samsung/dev-asocdma.c | 24 + arch/arm/plat-samsung/include/plat/devs.h | 2 +- include/sound/soc-dai.h | 2 - include/sound/soc-dapm.h | 1 - sound/soc/Kconfig | 2 +- sound/soc/Makefile | 2 +- sound/soc/atmel/playpaq_wm8510.c | 1 - sound/soc/atmel/sam9g20_wm8731.c | 5 +- sound/soc/atmel/snd-soc-afeb9260.c | 1 - sound/soc/au1x/db1200.c | 1 - sound/soc/blackfin/bf5xx-ad1836.c | 1 - sound/soc/blackfin/bf5xx-ad193x.c | 1 - sound/soc/blackfin/bf5xx-ad73311.c | 1 - sound/soc/blackfin/bf5xx-ssm2602.c | 1 - sound/soc/codecs/88pm860x-codec.c | 1 - sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ad1836.c | 1 - sound/soc/codecs/ad193x.c | 1 - sound/soc/codecs/ad1980.c | 1 - sound/soc/codecs/ak4535.c | 1 - sound/soc/codecs/ak4671.c | 1 - sound/soc/codecs/alc5623.c | 12 +- sound/soc/codecs/cq93vc.c | 2 - sound/soc/codecs/cs42l51.c | 1 - sound/soc/codecs/jz4740.c | 1 - sound/soc/codecs/max98088.c | 4 +- sound/soc/codecs/ssm2602.c | 1 - sound/soc/codecs/stac9766.c | 2 +- sound/soc/codecs/tlv320aic23.c | 1 - sound/soc/codecs/tlv320aic26.c | 1 - sound/soc/codecs/tlv320aic3x.c | 1 - sound/soc/codecs/tlv320dac33.c | 1 - sound/soc/codecs/tpa6130a2.c | 5 +- sound/soc/codecs/twl4030.c | 1 - sound/soc/codecs/twl6040.c | 1 - sound/soc/codecs/uda134x.c | 1 - sound/soc/codecs/uda1380.c | 1 - sound/soc/codecs/wl1273.c | 3 +- sound/soc/codecs/wm2000.c | 1 - sound/soc/codecs/wm8350.c | 1 - sound/soc/codecs/wm8400.c | 1 - sound/soc/codecs/wm8510.c | 1 - sound/soc/codecs/wm8523.c | 2 - sound/soc/codecs/wm8580.c | 1 - sound/soc/codecs/wm8711.c | 1 - sound/soc/codecs/wm8728.c | 1 - sound/soc/codecs/wm8731.c | 1 - sound/soc/codecs/wm8737.c | 713 +++++++++++ sound/soc/codecs/wm8737.h | 322 +++++ sound/soc/codecs/wm8741.c | 1 - sound/soc/codecs/wm8750.c | 1 - sound/soc/codecs/wm8753.c | 1 - sound/soc/codecs/wm8770.c | 1 - sound/soc/codecs/wm8776.c | 1 - sound/soc/codecs/wm8804.c | 1 - sound/soc/codecs/wm8900.c | 1 - sound/soc/codecs/wm8903.c | 1 - sound/soc/codecs/wm8904.c | 3 +- sound/soc/codecs/wm8940.c | 1 - sound/soc/codecs/wm8955.c | 1 - sound/soc/codecs/wm8960.c | 1 - sound/soc/codecs/wm8961.c | 5 +- sound/soc/codecs/wm8962.c | 1 - sound/soc/codecs/wm8971.c | 1 - sound/soc/codecs/wm8974.c | 1 - sound/soc/codecs/wm8978.c | 1 - sound/soc/codecs/wm8985.c | 1 - sound/soc/codecs/wm8988.c | 1 - sound/soc/codecs/wm8990.c | 1 - sound/soc/codecs/wm8993.c | 1 - sound/soc/codecs/wm8994.c | 5 +- sound/soc/codecs/wm9081.c | 1 - sound/soc/codecs/wm9090.c | 1 - sound/soc/codecs/wm9705.c | 1 - sound/soc/codecs/wm9712.c | 1 - sound/soc/codecs/wm9713.c | 1 - sound/soc/codecs/wm_hubs.c | 1 - sound/soc/davinci/davinci-evm.c | 1 - sound/soc/davinci/davinci-sffsdr.c | 1 - sound/soc/ep93xx/snappercl15.c | 1 - sound/soc/fsl/mpc5200_dma.c | 1 - sound/soc/imx/eukrea-tlv320.c | 1 - sound/soc/imx/phycore-ac97.c | 1 - sound/soc/imx/wm1133-ev1.c | 1 - sound/soc/jz4740/jz4740-i2s.c | 1 - sound/soc/jz4740/qi_lb60.c | 1 - sound/soc/kirkwood/kirkwood-t5325.c | 1 - sound/soc/nuc900/nuc900-ac97.c | 2 +- sound/soc/nuc900/nuc900-audio.c | 1 - sound/soc/omap/am3517evm.c | 1 - sound/soc/omap/igep0020.c | 1 - sound/soc/omap/n810.c | 1 - sound/soc/omap/omap-mcbsp.c | 8 + sound/soc/omap/omap2evm.c | 1 - sound/soc/omap/omap3beagle.c | 1 - sound/soc/omap/omap3evm.c | 1 - sound/soc/omap/omap3pandora.c | 2 +- sound/soc/omap/osk5912.c | 1 - sound/soc/omap/overo.c | 1 - sound/soc/omap/rx51.c | 1 - sound/soc/omap/sdp3430.c | 1 - sound/soc/omap/sdp4430.c | 1 - sound/soc/omap/zoom2.c | 1 - sound/soc/pxa/corgi.c | 1 - sound/soc/pxa/e740_wm9705.c | 1 - sound/soc/pxa/e750_wm9705.c | 1 - sound/soc/pxa/e800_wm9712.c | 1 - sound/soc/pxa/em-x270.c | 1 - sound/soc/pxa/magician.c | 1 - sound/soc/pxa/mioa701_wm9713.c | 1 - sound/soc/pxa/palm27x.c | 1 - sound/soc/pxa/poodle.c | 1 - sound/soc/pxa/raumfeld.c | 1 - sound/soc/pxa/saarb.c | 1 - sound/soc/pxa/spitz.c | 1 - sound/soc/pxa/tavorevb3.c | 1 - sound/soc/pxa/tosa.c | 1 - sound/soc/pxa/z2.c | 1 - sound/soc/pxa/zylonite.c | 1 - sound/soc/s3c24xx/Kconfig | 171 --- sound/soc/s3c24xx/Makefile | 55 - sound/soc/s3c24xx/aquila_wm8994.c | 296 ----- sound/soc/s3c24xx/s3c64xx-i2s-v4.c | 230 ---- sound/soc/s3c24xx/s3c64xx-i2s.c | 242 ---- sound/soc/s3c24xx/s3c64xx-i2s.h | 41 - sound/soc/s6000/s6105-ipcam.c | 1 - sound/soc/samsung/Kconfig | 155 +++ sound/soc/samsung/Makefile | 51 + sound/soc/{s3c24xx/s3c-ac97.c => samsung/ac97.c} | 22 +- sound/soc/{s3c24xx/s3c-ac97.h => samsung/ac97.h} | 8 +- sound/soc/{s3c24xx/s3c-dma.c => samsung/dma.c} | 134 +- sound/soc/{s3c24xx/s3c-dma.h => samsung/dma.h} | 2 +- sound/soc/{s3c24xx => samsung}/goni_wm8994.c | 36 +- sound/soc/samsung/i2s.c | 1256 ++++++++++++++++++++ sound/soc/samsung/i2s.h | 29 + sound/soc/{s3c24xx => samsung}/jive_wm8750.c | 7 +- sound/soc/{s3c24xx => samsung}/lm4857.h | 0 sound/soc/{s3c24xx => samsung}/ln2440sbc_alc650.c | 9 +- .../{s3c24xx => samsung}/neo1973_gta02_wm8753.c | 7 +- sound/soc/{s3c24xx => samsung}/neo1973_wm8753.c | 7 +- sound/soc/{s3c24xx/s3c-pcm.c => samsung/pcm.c} | 6 +- sound/soc/{s3c24xx/s3c-pcm.h => samsung/pcm.h} | 2 +- sound/soc/{s3c24xx => samsung}/regs-i2s-v2.h | 0 sound/soc/{s3c24xx => samsung}/rx1950_uda1380.c | 5 +- sound/soc/{s3c24xx => samsung}/s3c-i2s-v2.c | 4 +- sound/soc/{s3c24xx => samsung}/s3c-i2s-v2.h | 2 +- sound/soc/{s3c24xx => samsung}/s3c2412-i2s.c | 4 +- sound/soc/{s3c24xx => samsung}/s3c2412-i2s.h | 2 +- sound/soc/{s3c24xx => samsung}/s3c24xx-i2s.c | 2 +- sound/soc/{s3c24xx => samsung}/s3c24xx-i2s.h | 0 sound/soc/{s3c24xx => samsung}/s3c24xx_simtec.c | 5 +- sound/soc/{s3c24xx => samsung}/s3c24xx_simtec.h | 2 +- .../{s3c24xx => samsung}/s3c24xx_simtec_hermes.c | 7 +- .../s3c24xx_simtec_tlv320aic23.c | 7 +- sound/soc/{s3c24xx => samsung}/s3c24xx_uda134x.c | 5 +- sound/soc/{s3c24xx => samsung}/smartq_wm8987.c | 33 +- sound/soc/{s3c24xx => samsung}/smdk2443_wm9710.c | 9 +- sound/soc/{s3c24xx => samsung}/smdk_spdif.c | 8 +- .../smdk64xx_wm8580.c => samsung/smdk_wm8580.c} | 151 ++-- sound/soc/{s3c24xx => samsung}/smdk_wm9713.c | 8 +- sound/soc/{s3c24xx => samsung}/spdif.c | 4 +- sound/soc/{s3c24xx => samsung}/spdif.h | 2 +- sound/soc/sh/migor.c | 1 - sound/soc/sh/sh7760-ac97.c | 1 - sound/soc/sh/siu.h | 2 +- sound/soc/sh/siu_dai.c | 2 +- sound/soc/sh/siu_pcm.c | 2 +- sound/soc/soc-core.c | 1 - sound/soc/soc-dapm.c | 1 - sound/soc/soc-jack.c | 1 - 180 files changed, 2859 insertions(+), 1456 deletions(-) create mode 100644 arch/arm/plat-samsung/dev-asocdma.c create mode 100644 sound/soc/codecs/wm8737.c create mode 100644 sound/soc/codecs/wm8737.h delete mode 100644 sound/soc/s3c24xx/Kconfig delete mode 100644 sound/soc/s3c24xx/Makefile delete mode 100644 sound/soc/s3c24xx/aquila_wm8994.c delete mode 100644 sound/soc/s3c24xx/s3c64xx-i2s-v4.c delete mode 100644 sound/soc/s3c24xx/s3c64xx-i2s.c delete mode 100644 sound/soc/s3c24xx/s3c64xx-i2s.h create mode 100644 sound/soc/samsung/Kconfig create mode 100644 sound/soc/samsung/Makefile rename sound/soc/{s3c24xx/s3c-ac97.c => samsung/ac97.c} (96%) rename sound/soc/{s3c24xx/s3c-ac97.h => samsung/ac97.h} (73%) rename sound/soc/{s3c24xx/s3c-dma.c => samsung/dma.c} (74%) rename sound/soc/{s3c24xx/s3c-dma.h => samsung/dma.h} (97%) rename sound/soc/{s3c24xx => samsung}/goni_wm8994.c (92%) create mode 100644 sound/soc/samsung/i2s.c create mode 100644 sound/soc/samsung/i2s.h rename sound/soc/{s3c24xx => samsung}/jive_wm8750.c (97%) rename sound/soc/{s3c24xx => samsung}/lm4857.h (100%) rename sound/soc/{s3c24xx => samsung}/ln2440sbc_alc650.c (92%) rename sound/soc/{s3c24xx => samsung}/neo1973_gta02_wm8753.c (99%) rename sound/soc/{s3c24xx => samsung}/neo1973_wm8753.c (99%) rename sound/soc/{s3c24xx/s3c-pcm.c => samsung/pcm.c} (99%) rename sound/soc/{s3c24xx/s3c-pcm.h => samsung/pcm.h} (99%) rename sound/soc/{s3c24xx => samsung}/regs-i2s-v2.h (100%) rename sound/soc/{s3c24xx => samsung}/rx1950_uda1380.c (98%) rename sound/soc/{s3c24xx => samsung}/s3c-i2s-v2.c (99%) rename sound/soc/{s3c24xx => samsung}/s3c-i2s-v2.h (98%) rename sound/soc/{s3c24xx => samsung}/s3c2412-i2s.c (98%) rename sound/soc/{s3c24xx => samsung}/s3c2412-i2s.h (95%) rename sound/soc/{s3c24xx => samsung}/s3c24xx-i2s.c (99%) rename sound/soc/{s3c24xx => samsung}/s3c24xx-i2s.h (100%) rename sound/soc/{s3c24xx => samsung}/s3c24xx_simtec.c (99%) rename sound/soc/{s3c24xx => samsung}/s3c24xx_simtec.h (94%) rename sound/soc/{s3c24xx => samsung}/s3c24xx_simtec_hermes.c (96%) rename sound/soc/{s3c24xx => samsung}/s3c24xx_simtec_tlv320aic23.c (96%) rename sound/soc/{s3c24xx => samsung}/s3c24xx_uda134x.c (99%) rename sound/soc/{s3c24xx => samsung}/smartq_wm8987.c (92%) rename sound/soc/{s3c24xx => samsung}/smdk2443_wm9710.c (92%) rename sound/soc/{s3c24xx => samsung}/smdk_spdif.c (97%) rename sound/soc/{s3c24xx/smdk64xx_wm8580.c => samsung/smdk_wm8580.c} (63%) rename sound/soc/{s3c24xx => samsung}/smdk_wm9713.c (95%) rename sound/soc/{s3c24xx => samsung}/spdif.c (99%) rename sound/soc/{s3c24xx => samsung}/spdif.h (94%)

2 1

[alsa-devel] ASoC updates for 2.6.37
by Mark Brown 24 Nov '10

24 Nov '10

The following changes since commit bf86f07e8479f4de20d8b19748482eccda240664: Merge branch 'for-2.6.37' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc (2010-11-23 12:40:15 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.37 All very small, driver specific fixes - the majority of this is fallout from the multi-component merge, we're expecting a greater volume of fixes this time round than is normal. Axel Lin (9): ASoC: stac9766 - set reg_cache_default to stac9766_reg ASoC: Do not update the cache if write to hardware failed ASoC: max98088 - fix a memory leak ASoC: wm8904 - fix memory leaks ASoC: wm8994 - fix memory leaks ASoC: wm8961 - clear WM8961_DACSLOPE bit for normal mode ASoC: wm8961 - clear WM8961_MCLKDIV bit for freq <= 16500000 ASoC: Return proper error for omap3pandora_soc_init ASoC: nuc900-ac97: fix a memory leak Jesper Juhl (1): ASoC: MPC5200: Eliminate duplicate include of of_device.h Mark Brown (3): ASoC: Fix multi-component mismerge in WM8523 ASoC: Restore WM8994 volatile and readable register operations Merge branch 'fix/asoc' of git://git.kernel.org/.../tiwai/sound-2.6 into for-2.6.37 Vasiliy Kulikov (2): ASoC: s3c24xx: test wrong variable ASoC: atmel: test wrong variable sound/soc/atmel/sam9g20_wm8731.c | 4 ++-- sound/soc/codecs/max98088.c | 3 +++ sound/soc/codecs/stac9766.c | 1 + sound/soc/codecs/tpa6130a2.c | 4 +++- sound/soc/codecs/wm8523.c | 1 - sound/soc/codecs/wm8904.c | 2 ++ sound/soc/codecs/wm8961.c | 4 ++-- sound/soc/codecs/wm8994.c | 4 ++++ sound/soc/fsl/mpc5200_dma.c | 1 - sound/soc/nuc900/nuc900-ac97.c | 2 +- sound/soc/omap/omap3pandora.c | 1 + sound/soc/s3c24xx/smdk_spdif.c | 4 ++-- 12 files changed, 21 insertions(+), 10 deletions(-)

2 1

[alsa-devel] Creative Sound Blaster Audigy SE Mic problem
by Grega Fajdiga 24 Nov '10

24 Nov '10

Hello, I am using Ubuntu 10.10 with a Creative Sound Blaster Audigy SE. The snd_ca0106 module is loaded. I have a Y-connector plugged in the green front left/right jack so that I can listen at the sound through speakers and the headphones at the same time. The microphone is plugged into the blue jack, consistent with the sound card specs: http://pdfguides.com/creative-labs-sound-blaster-audigy-se-features-specifi… I go the sound working after getting a tip that both the digital and analog mixer might be turned on. After turning the digital control off, sound started to work. However, mic still isn't working in Linux, although it works just fine in Win 7. There are 7 input mixers available in alsamixer: -Line-in: set at 81/81 volume -Mic: 100/100 -Phone 81/81 -Aux: 0/0 -Analog Source: set to Mic (no VU meter) -Digital Source: set to AC97 in (cannot seem to be muted) -Shared Mic/Line in set to Line in If I set both Analog Source and Shared Mic/Line in to Mic, I get screeching sounds from speakers and headphones. If I set one of them to Line in and one to Mic no sound is played back after I record some sound. Can anyone help? Thanks, -- Grega Fajdiga Hacquetova 5 1113 Ljubljana GSM: +386 40 923 635 E-pošta: Gregor.Fajdiga(a)guest.arnes.si

1 0

[PATCH] ALSA: HDA: Add an extra DAC for Realtek ALC887-VD
by David Henningsson 24 Nov '10

24 Nov '10

The patch enables ALC887-VD to use the DAC at nid 0x26, which makes it possible to use this DAC for e g Headphone volume. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 434d817..aa7fa51 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -18973,6 +18973,8 @@ static inline hda_nid_t alc662_mix_to_dac(hda_nid_t nid) return 0x02; else if (nid >= 0x0c && nid <= 0x0e) return nid - 0x0c + 0x02; + else if (nid == 0x26) /* ALC887-VD has this DAC too */ + return 0x25; else return 0; } @@ -18981,7 +18983,7 @@ static inline hda_nid_t alc662_mix_to_dac(hda_nid_t nid) static hda_nid_t alc662_dac_to_mix(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac) { - hda_nid_t mix[4]; + hda_nid_t mix[5]; int i, num; num = snd_hda_get_connections(codec, pin, mix, ARRAY_SIZE(mix)); -- 1.7.1 --------------030702060909000302040706 Content-Type: text/plain; name="alc887vd.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="alc887vd.txt" Codec: Realtek ALC887-VD Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0887 Subsystem Id: 0x102804aa Revision Id: 0x100302 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC887-VD Analog", type="Audio", device=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="ALC887-VD Digital", type="SPDIF", device=1 Converter: stream=5, channel=0 Digital: Enabled Digital category: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Switch", index=1, device=0 Control: name="Capture Volume", index=1, device=0 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Switch", index=0, device=0 Control: name="Capture Volume", index=0, device=0 Device: name="ALC887-VD Analog", type="Audio", device=0 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x2e 0x2e] Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Front Mic Playback Volume", index=1, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Front Mic Playback Switch", index=1, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Surround Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Center Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=In, idx=0, ofs=0 Control: name="LFE Playback Switch", index=0, device=0 ControlAmp: chs=2, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x00 0x00] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x05 0x0b Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x11 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x10 Node 0x12 [Pin Complex] wcaps 0x400401: Stereo Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger EAPD 0x2: EAPD Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0c Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01011012: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0d Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01016011: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0e Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01012014: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0x4 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Rear Mic Boost", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003736: IN OUT Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19830: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Front Mic Boost", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19831: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x1 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003736: IN OUT Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x0181303f: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x3, Sequence = 0xf Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger Vref caps: HIZ 50 GRD 80 100 EAPD 0x2: EAPD Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c 0x0d 0x0e 0x0f 0x26* Node 0x1c [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x4005e601: [N/A] Line Out at Ext N/A Conn = Optical, Color = White DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x01451120: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Black DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400681: Stereo Digital Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=24 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 12 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12 Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=1, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x25 0x0b --------------030702060909000302040706--

1 0

[alsa-devel] [PATCH] ASoC: Add initial WM8737 driver
by Mark Brown 24 Nov '10

24 Nov '10

The WM8737 is a low power, flexible stereo ADC designed for portable applications. This driver supports most of the functionality of the WM8737, though some features such as the ALC are not yet implemented. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm8737.c | 713 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8737.h | 322 ++++++++++++++++++++ 4 files changed, 1041 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm8737.c create mode 100644 sound/soc/codecs/wm8737.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index fed38e7..c21c3da 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -56,6 +56,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8727 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI + select SND_SOC_WM8737 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI @@ -240,6 +241,9 @@ config SND_SOC_WM8728 config SND_SOC_WM8731 tristate +config SND_SOC_WM8737 + tristate + config SND_SOC_WM8741 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index db0cdb9..8463213 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -40,6 +40,7 @@ snd-soc-wm8711-objs := wm8711.o snd-soc-wm8727-objs := wm8727.o snd-soc-wm8728-objs := wm8728.o snd-soc-wm8731-objs := wm8731.o +snd-soc-wm8737-objs := wm8737.o snd-soc-wm8741-objs := wm8741.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o @@ -118,6 +119,7 @@ obj-$(CONFIG_SND_SOC_WM8711) += snd-soc-wm8711.o obj-$(CONFIG_SND_SOC_WM8727) += snd-soc-wm8727.o obj-$(CONFIG_SND_SOC_WM8728) += snd-soc-wm8728.o obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o +obj-$(CONFIG_SND_SOC_WM8737) += snd-soc-wm8737.o obj-$(CONFIG_SND_SOC_WM8741) += snd-soc-wm8741.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o diff --git a/sound/soc/codecs/wm8737.c b/sound/soc/codecs/wm8737.c new file mode 100644 index 0000000..a325fe6 --- /dev/null +++ b/sound/soc/codecs/wm8737.c @@ -0,0 +1,713 @@ +/* + * wm8737.c -- WM8737 ALSA SoC Audio driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Mark Brown <broonie(a)opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "wm8737.h" + +#define WM8737_NUM_SUPPLIES 4 +static const char *wm8737_supply_names[WM8737_NUM_SUPPLIES] = { + "DCVDD", + "DBVDD", + "AVDD", + "MVDD", +}; + +/* codec private data */ +struct wm8737_priv { + enum snd_soc_control_type control_type; + struct regulator_bulk_data supplies[WM8737_NUM_SUPPLIES]; + unsigned int mclk; +}; + +static const u16 wm8737_reg[WM8737_REGISTER_COUNT] = { + 0x00C3, /* R0 - Left PGA volume */ + 0x00C3, /* R1 - Right PGA volume */ + 0x0007, /* R2 - AUDIO path L */ + 0x0007, /* R3 - AUDIO path R */ + 0x0000, /* R4 - 3D Enhance */ + 0x0000, /* R5 - ADC Control */ + 0x0000, /* R6 - Power Management */ + 0x000A, /* R7 - Audio Format */ + 0x0000, /* R8 - Clocking */ + 0x000F, /* R9 - MIC Preamp Control */ + 0x0003, /* R10 - Misc Bias Control */ + 0x0000, /* R11 - Noise Gate */ + 0x007C, /* R12 - ALC1 */ + 0x0000, /* R13 - ALC2 */ + 0x0032, /* R14 - ALC3 */ +}; + +static int wm8737_reset(struct snd_soc_codec *codec) +{ + return snd_soc_write(codec, WM8737_RESET, 0); +} + +static const unsigned int micboost_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 0, TLV_DB_SCALE_ITEM(1300, 0, 0), + 1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0), + 2, 2, TLV_DB_SCALE_ITEM(2800, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(3300, 0, 0), +}; +static const DECLARE_TLV_DB_SCALE(pga_tlv, -9750, 50, 1); +static const DECLARE_TLV_DB_SCALE(adc_tlv, -600, 600, 0); +static const DECLARE_TLV_DB_SCALE(ng_tlv, -7800, 600, 0); + +static const char *micbias_enum_text[] = { + "25%", + "50%", + "75%", + "100%", +}; + +static const struct soc_enum micbias_enum = + SOC_ENUM_SINGLE(WM8737_MIC_PREAMP_CONTROL, 0, 4, micbias_enum_text); + +static const char *low_cutoff_text[] = { + "Low", "High" +}; + +static const struct soc_enum low_3d = + SOC_ENUM_SINGLE(WM8737_3D_ENHANCE, 6, 2, low_cutoff_text); + +static const char *high_cutoff_text[] = { + "High", "Low" +}; + +static const struct soc_enum high_3d = + SOC_ENUM_SINGLE(WM8737_3D_ENHANCE, 5, 2, high_cutoff_text); + +static const struct snd_kcontrol_new wm8737_snd_controls[] = { +SOC_DOUBLE_R_TLV("Mic Boost Volume", WM8737_AUDIO_PATH_L, WM8737_AUDIO_PATH_R, + 6, 3, 0, micboost_tlv), +SOC_DOUBLE_R("Mic Boost Switch", WM8737_AUDIO_PATH_L, WM8737_AUDIO_PATH_R, + 4, 1, 0), +SOC_DOUBLE("Mic ZC Switch", WM8737_AUDIO_PATH_L, WM8737_AUDIO_PATH_R, + 3, 1, 0), + +SOC_DOUBLE_R_TLV("Capture Volume", WM8737_LEFT_PGA_VOLUME, + WM8737_RIGHT_PGA_VOLUME, 0, 255, 0, pga_tlv), +SOC_DOUBLE("Capture ZC Switch", WM8737_AUDIO_PATH_L, WM8737_AUDIO_PATH_R, + 2, 1, 0), + +SOC_DOUBLE("INPUT1 DC Bias Switch", WM8737_MISC_BIAS_CONTROL, 0, 1, 1, 0), + +SOC_ENUM("Mic PGA Bias", micbias_enum), +SOC_SINGLE("ADC Low Power Switch", WM8737_ADC_CONTROL, 2, 1, 0), +SOC_SINGLE("High Pass Filter Switch", WM8737_ADC_CONTROL, 0, 1, 1), +SOC_DOUBLE("Polarity Invert Switch", WM8737_ADC_CONTROL, 5, 6, 1, 0), + +SOC_SINGLE("3D Switch", WM8737_3D_ENHANCE, 0, 1, 0), +SOC_SINGLE("3D Depth", WM8737_3D_ENHANCE, 1, 15, 0), +SOC_ENUM("3D Low Cut-off", low_3d), +SOC_ENUM("3D High Cut-off", low_3d), +SOC_SINGLE_TLV("3D ADC Volume", WM8737_3D_ENHANCE, 7, 1, 1, adc_tlv), + +SOC_SINGLE("Noise Gate Switch", WM8737_NOISE_GATE, 0, 1, 0), +SOC_SINGLE_TLV("Noise Gate Threshold Volume", WM8737_NOISE_GATE, 2, 7, 0, + ng_tlv), +}; + +static const char *linsel_text[] = { + "LINPUT1", "LINPUT2", "LINPUT3", "LINPUT1 DC", +}; + +static const struct soc_enum linsel_enum = + SOC_ENUM_SINGLE(WM8737_AUDIO_PATH_L, 7, 4, linsel_text); + +static const struct snd_kcontrol_new linsel_mux = + SOC_DAPM_ENUM("LINSEL", linsel_enum); + + +static const char *rinsel_text[] = { + "RINPUT1", "RINPUT2", "RINPUT3", "RINPUT1 DC", +}; + +static const struct soc_enum rinsel_enum = + SOC_ENUM_SINGLE(WM8737_AUDIO_PATH_R, 7, 4, rinsel_text); + +static const struct snd_kcontrol_new rinsel_mux = + SOC_DAPM_ENUM("RINSEL", rinsel_enum); + +static const char *bypass_text[] = { + "Direct", "Preamp" +}; + +static const struct soc_enum lbypass_enum = + SOC_ENUM_SINGLE(WM8737_MIC_PREAMP_CONTROL, 2, 2, bypass_text); + +static const struct snd_kcontrol_new lbypass_mux = + SOC_DAPM_ENUM("Left Bypass", lbypass_enum); + + +static const struct soc_enum rbypass_enum = + SOC_ENUM_SINGLE(WM8737_MIC_PREAMP_CONTROL, 3, 2, bypass_text); + +static const struct snd_kcontrol_new rbypass_mux = + SOC_DAPM_ENUM("Left Bypass", rbypass_enum); + +static const struct snd_soc_dapm_widget wm8737_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("LINPUT1"), +SND_SOC_DAPM_INPUT("LINPUT2"), +SND_SOC_DAPM_INPUT("LINPUT3"), +SND_SOC_DAPM_INPUT("RINPUT1"), +SND_SOC_DAPM_INPUT("RINPUT2"), +SND_SOC_DAPM_INPUT("RINPUT3"), +SND_SOC_DAPM_INPUT("LACIN"), +SND_SOC_DAPM_INPUT("RACIN"), + +SND_SOC_DAPM_MUX("LINSEL", SND_SOC_NOPM, 0, 0, &linsel_mux), +SND_SOC_DAPM_MUX("RINSEL", SND_SOC_NOPM, 0, 0, &rinsel_mux), + +SND_SOC_DAPM_MUX("Left Preamp Mux", SND_SOC_NOPM, 0, 0, &lbypass_mux), +SND_SOC_DAPM_MUX("Right Preamp Mux", SND_SOC_NOPM, 0, 0, &rbypass_mux), + +SND_SOC_DAPM_PGA("PGAL", WM8737_POWER_MANAGEMENT, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA("PGAR", WM8737_POWER_MANAGEMENT, 4, 0, NULL, 0), + +SND_SOC_DAPM_DAC("ADCL", NULL, WM8737_POWER_MANAGEMENT, 3, 0), +SND_SOC_DAPM_DAC("ADCR", NULL, WM8737_POWER_MANAGEMENT, 2, 0), + +SND_SOC_DAPM_AIF_OUT("AIF", "Capture", 0, WM8737_POWER_MANAGEMENT, 6, 0), +}; + +static const struct snd_soc_dapm_route intercon[] = { + { "LINSEL", "LINPUT1", "LINPUT1" }, + { "LINSEL", "LINPUT2", "LINPUT2" }, + { "LINSEL", "LINPUT3", "LINPUT3" }, + { "LINSEL", "LINPUT1 DC", "LINPUT1" }, + + { "RINSEL", "RINPUT1", "RINPUT1" }, + { "RINSEL", "RINPUT2", "RINPUT2" }, + { "RINSEL", "RINPUT3", "RINPUT3" }, + { "RINSEL", "RINPUT1 DC", "RINPUT1" }, + + { "Left Preamp Mux", "Preamp", "LINSEL" }, + { "Left Preamp Mux", "Direct", "LACIN" }, + + { "Right Preamp Mux", "Preamp", "RINSEL" }, + { "Right Preamp Mux", "Direct", "RACIN" }, + + { "PGAL", NULL, "Left Preamp Mux" }, + { "PGAR", NULL, "Right Preamp Mux" }, + + { "ADCL", NULL, "PGAL" }, + { "ADCR", NULL, "PGAR" }, + + { "AIF", NULL, "ADCL" }, + { "AIF", NULL, "ADCR" }, +}; + +static int wm8737_add_widgets(struct snd_soc_codec *codec) +{ + struct snd_soc_dapm_context *dapm = &codec->dapm; + + snd_soc_dapm_new_controls(dapm, wm8737_dapm_widgets, + ARRAY_SIZE(wm8737_dapm_widgets)); + snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon)); + + return 0; +} + +/* codec mclk clock divider coefficients */ +static const struct { + u32 mclk; + u32 rate; + u8 usb; + u8 sr; +} coeff_div[] = { + { 12288000, 8000, 0, 0x4 }, + { 12288000, 12000, 0, 0x8 }, + { 12288000, 16000, 0, 0xa }, + { 12288000, 24000, 0, 0x1c }, + { 12288000, 32000, 0, 0xc }, + { 12288000, 48000, 0, 0 }, + { 12288000, 96000, 0, 0xe }, + + { 11289600, 8000, 0, 0x14 }, + { 11289600, 11025, 0, 0x18 }, + { 11289600, 22050, 0, 0x1a }, + { 11289600, 44100, 0, 0x10 }, + { 11289600, 88200, 0, 0x1e }, + + { 18432000, 8000, 0, 0x5 }, + { 18432000, 12000, 0, 0x9 }, + { 18432000, 16000, 0, 0xb }, + { 18432000, 24000, 0, 0x1b }, + { 18432000, 32000, 0, 0xd }, + { 18432000, 48000, 0, 0x1 }, + { 18432000, 96000, 0, 0x1f }, + + { 16934400, 8000, 0, 0x15 }, + { 16934400, 11025, 0, 0x19 }, + { 16934400, 22050, 0, 0x1b }, + { 16934400, 44100, 0, 0x11 }, + { 16934400, 88200, 0, 0x1f }, + + { 12000000, 8000, 1, 0x4 }, + { 12000000, 11025, 1, 0x19 }, + { 12000000, 12000, 1, 0x8 }, + { 12000000, 16000, 1, 0xa }, + { 12000000, 22050, 1, 0x1b }, + { 12000000, 24000, 1, 0x1c }, + { 12000000, 32000, 1, 0xc }, + { 12000000, 44100, 1, 0x11 }, + { 12000000, 48000, 1, 0x0 }, + { 12000000, 88200, 1, 0x1f }, + { 12000000, 96000, 1, 0xe }, +}; + +static int wm8737_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec *codec = rtd->codec; + struct wm8737_priv *wm8737 = snd_soc_codec_get_drvdata(codec); + int i; + u16 clocking = 0; + u16 af = 0; + + for (i = 0; i < ARRAY_SIZE(coeff_div); i++) { + if (coeff_div[i].rate != params_rate(params)) + continue; + + if (coeff_div[i].mclk == wm8737->mclk) + break; + + if (coeff_div[i].mclk == wm8737->mclk * 2) { + clocking |= WM8737_CLKDIV2; + break; + } + } + + if (i == ARRAY_SIZE(coeff_div)) { + dev_err(codec->dev, "%dHz MCLK can't support %dHz\n", + wm8737->mclk, params_rate(params)); + return -EINVAL; + } + + clocking |= coeff_div[i].usb | (coeff_div[i].sr << WM8737_SR_SHIFT); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + af |= 0x8; + break; + case SNDRV_PCM_FORMAT_S24_LE: + af |= 0x10; + break; + case SNDRV_PCM_FORMAT_S32_LE: + af |= 0x18; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, WM8737_AUDIO_FORMAT, WM8737_WL_MASK, af); + snd_soc_update_bits(codec, WM8737_CLOCKING, + WM8737_USB_MODE | WM8737_CLKDIV2 | WM8737_SR_MASK, + clocking); + + return 0; +} + +static int wm8737_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8737_priv *wm8737 = snd_soc_codec_get_drvdata(codec); + int i; + + for (i = 0; i < ARRAY_SIZE(coeff_div); i++) { + if (freq == coeff_div[i].mclk || + freq == coeff_div[i].mclk * 2) { + wm8737->mclk = freq; + return 0; + } + } + + dev_err(codec->dev, "MCLK rate %dHz not supported\n", freq); + + return -EINVAL; +} + + +static int wm8737_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 af = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + af |= WM8737_MS; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + af |= 0x2; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + af |= 0x1; + break; + case SND_SOC_DAIFMT_DSP_A: + af |= 0x3; + break; + case SND_SOC_DAIFMT_DSP_B: + af |= 0x13; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_NB_IF: + af |= WM8737_LRP; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, WM8737_AUDIO_FORMAT, + WM8737_FORMAT_MASK | WM8737_LRP | WM8737_MS, af); + + return 0; +} + +static int wm8737_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct wm8737_priv *wm8737 = snd_soc_codec_get_drvdata(codec); + int ret; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + /* VMID at 2*75k */ + snd_soc_update_bits(codec, WM8737_MISC_BIAS_CONTROL, + WM8737_VMIDSEL_MASK, 0); + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + ret = regulator_bulk_enable(ARRAY_SIZE(wm8737->supplies), + wm8737->supplies); + if (ret != 0) { + dev_err(codec->dev, + "Failed to enable supplies: %d\n", + ret); + return ret; + } + + snd_soc_cache_sync(codec); + + /* Fast VMID ramp at 2*2.5k */ + snd_soc_update_bits(codec, WM8737_MISC_BIAS_CONTROL, + WM8737_VMIDSEL_MASK, 0x4); + + /* Bring VMID up */ + snd_soc_update_bits(codec, WM8737_POWER_MANAGEMENT, + WM8737_VMID_MASK | + WM8737_VREF_MASK, + WM8737_VMID_MASK | + WM8737_VREF_MASK); + + msleep(500); + } + + /* VMID at 2*300k */ + snd_soc_update_bits(codec, WM8737_MISC_BIAS_CONTROL, + WM8737_VMIDSEL_MASK, 2); + + break; + + case SND_SOC_BIAS_OFF: + snd_soc_update_bits(codec, WM8737_POWER_MANAGEMENT, + WM8737_VMID_MASK | WM8737_VREF_MASK, 0); + + regulator_bulk_disable(ARRAY_SIZE(wm8737->supplies), + wm8737->supplies); + break; + } + + codec->dapm.bias_level = level; + return 0; +} + +#define WM8737_RATES SNDRV_PCM_RATE_8000_96000 + +#define WM8737_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8737_dai_ops = { + .hw_params = wm8737_hw_params, + .set_sysclk = wm8737_set_dai_sysclk, + .set_fmt = wm8737_set_dai_fmt, +}; + +static struct snd_soc_dai_driver wm8737_dai = { + .name = "wm8737", + .capture = { + .stream_name = "Capture", + .channels_min = 2, /* Mono modes not yet supported */ + .channels_max = 2, + .rates = WM8737_RATES, + .formats = WM8737_FORMATS, + }, + .ops = &wm8737_dai_ops, +}; + +#ifdef CONFIG_PM +static int wm8737_suspend(struct snd_soc_codec *codec, pm_message_t state) +{ + wm8737_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8737_resume(struct snd_soc_codec *codec) +{ + wm8737_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + return 0; +} +#else +#define wm8737_suspend NULL +#define wm8737_resume NULL +#endif + +static int wm8737_probe(struct snd_soc_codec *codec) +{ + struct wm8737_priv *wm8737 = snd_soc_codec_get_drvdata(codec); + int ret, i; + + codec->hw_write = (hw_write_t)i2c_master_send; + ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8737->control_type); + if (ret != 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(wm8737->supplies); i++) + wm8737->supplies[i].supply = wm8737_supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8737->supplies), + wm8737->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8737->supplies), + wm8737->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + goto err_get; + } + + ret = wm8737_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + goto err_enable; + } + + snd_soc_update_bits(codec, WM8737_LEFT_PGA_VOLUME, WM8737_LVU, + WM8737_LVU); + snd_soc_update_bits(codec, WM8737_RIGHT_PGA_VOLUME, WM8737_RVU, + WM8737_RVU); + + wm8737_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Bias level configuration will have done an extra enable */ + regulator_bulk_disable(ARRAY_SIZE(wm8737->supplies), wm8737->supplies); + + snd_soc_add_controls(codec, wm8737_snd_controls, + ARRAY_SIZE(wm8737_snd_controls)); + wm8737_add_widgets(codec); + + return 0; + +err_enable: + regulator_bulk_disable(ARRAY_SIZE(wm8737->supplies), wm8737->supplies); +err_get: + regulator_bulk_free(ARRAY_SIZE(wm8737->supplies), wm8737->supplies); + + return ret; +} + +static int wm8737_remove(struct snd_soc_codec *codec) +{ + struct wm8737_priv *wm8737 = snd_soc_codec_get_drvdata(codec); + + wm8737_set_bias_level(codec, SND_SOC_BIAS_OFF); + regulator_bulk_free(ARRAY_SIZE(wm8737->supplies), wm8737->supplies); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_wm8737 = { + .probe = wm8737_probe, + .remove = wm8737_remove, + .suspend = wm8737_suspend, + .resume = wm8737_resume, + .set_bias_level = wm8737_set_bias_level, + + .reg_cache_size = WM8737_REGISTER_COUNT - 1, /* Skip reset */ + .reg_word_size = sizeof(u16), + .reg_cache_default = wm8737_reg, +}; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +static __devinit int wm8737_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8737_priv *wm8737; + int ret; + + wm8737 = kzalloc(sizeof(struct wm8737_priv), GFP_KERNEL); + if (wm8737 == NULL) + return -ENOMEM; + + i2c_set_clientdata(i2c, wm8737); + wm8737->control_type = SND_SOC_I2C; + + ret = snd_soc_register_codec(&i2c->dev, + &soc_codec_dev_wm8737, &wm8737_dai, 1); + if (ret < 0) + kfree(wm8737); + return ret; + +} + +static __devexit int wm8737_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + kfree(i2c_get_clientdata(client)); + return 0; +} + +static const struct i2c_device_id wm8737_i2c_id[] = { + { "wm8737", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8737_i2c_id); + +static struct i2c_driver wm8737_i2c_driver = { + .driver = { + .name = "wm8737", + .owner = THIS_MODULE, + }, + .probe = wm8737_i2c_probe, + .remove = __devexit_p(wm8737_i2c_remove), + .id_table = wm8737_i2c_id, +}; +#endif + +#if defined(CONFIG_SPI_MASTER) +static int __devinit wm8737_spi_probe(struct spi_device *spi) +{ + struct wm8737_priv *wm8737; + int ret; + + wm8737 = kzalloc(sizeof(struct wm8737_priv), GFP_KERNEL); + if (wm8737 == NULL) + return -ENOMEM; + + wm8737->control_type = SND_SOC_SPI; + spi_set_drvdata(spi, wm8737); + + ret = snd_soc_register_codec(&spi->dev, + &soc_codec_dev_wm8737, &wm8737_dai, 1); + if (ret < 0) + kfree(wm8737); + return ret; +} + +static int __devexit wm8737_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + kfree(spi_get_drvdata(spi)); + return 0; +} + +static struct spi_driver wm8737_spi_driver = { + .driver = { + .name = "wm8737", + .owner = THIS_MODULE, + }, + .probe = wm8737_spi_probe, + .remove = __devexit_p(wm8737_spi_remove), +}; +#endif /* CONFIG_SPI_MASTER */ + +static int __init wm8737_modinit(void) +{ + int ret; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + ret = i2c_add_driver(&wm8737_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8737 I2C driver: %d\n", + ret); + } +#endif +#if defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&wm8737_spi_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8737 SPI driver: %d\n", + ret); + } +#endif + return 0; +} +module_init(wm8737_modinit); + +static void __exit wm8737_exit(void) +{ +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8737_spi_driver); +#endif +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8737_i2c_driver); +#endif +} +module_exit(wm8737_exit); + +MODULE_DESCRIPTION("ASoC WM8737 driver"); +MODULE_AUTHOR("Mark Brown <broonie(a)opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8737.h b/sound/soc/codecs/wm8737.h new file mode 100644 index 0000000..23d14c8 --- /dev/null +++ b/sound/soc/codecs/wm8737.h @@ -0,0 +1,322 @@ +#ifndef _WM8737_H +#define _WM8737_H + +/* + * wm8737.c -- WM8523 ALSA SoC Audio driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Mark Brown <broonie(a)opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Register values. + */ +#define WM8737_LEFT_PGA_VOLUME 0x00 +#define WM8737_RIGHT_PGA_VOLUME 0x01 +#define WM8737_AUDIO_PATH_L 0x02 +#define WM8737_AUDIO_PATH_R 0x03 +#define WM8737_3D_ENHANCE 0x04 +#define WM8737_ADC_CONTROL 0x05 +#define WM8737_POWER_MANAGEMENT 0x06 +#define WM8737_AUDIO_FORMAT 0x07 +#define WM8737_CLOCKING 0x08 +#define WM8737_MIC_PREAMP_CONTROL 0x09 +#define WM8737_MISC_BIAS_CONTROL 0x0A +#define WM8737_NOISE_GATE 0x0B +#define WM8737_ALC1 0x0C +#define WM8737_ALC2 0x0D +#define WM8737_ALC3 0x0E +#define WM8737_RESET 0x0F + +#define WM8737_REGISTER_COUNT 16 +#define WM8737_MAX_REGISTER 0x0F + +/* + * Field Definitions. + */ + +/* + * R0 (0x00) - Left PGA volume + */ +#define WM8737_LVU 0x0100 /* LVU */ +#define WM8737_LVU_MASK 0x0100 /* LVU */ +#define WM8737_LVU_SHIFT 8 /* LVU */ +#define WM8737_LVU_WIDTH 1 /* LVU */ +#define WM8737_LINVOL_MASK 0x00FF /* LINVOL - [7:0] */ +#define WM8737_LINVOL_SHIFT 0 /* LINVOL - [7:0] */ +#define WM8737_LINVOL_WIDTH 8 /* LINVOL - [7:0] */ + +/* + * R1 (0x01) - Right PGA volume + */ +#define WM8737_RVU 0x0100 /* RVU */ +#define WM8737_RVU_MASK 0x0100 /* RVU */ +#define WM8737_RVU_SHIFT 8 /* RVU */ +#define WM8737_RVU_WIDTH 1 /* RVU */ +#define WM8737_RINVOL_MASK 0x00FF /* RINVOL - [7:0] */ +#define WM8737_RINVOL_SHIFT 0 /* RINVOL - [7:0] */ +#define WM8737_RINVOL_WIDTH 8 /* RINVOL - [7:0] */ + +/* + * R2 (0x02) - AUDIO path L + */ +#define WM8737_LINSEL_MASK 0x0180 /* LINSEL - [8:7] */ +#define WM8737_LINSEL_SHIFT 7 /* LINSEL - [8:7] */ +#define WM8737_LINSEL_WIDTH 2 /* LINSEL - [8:7] */ +#define WM8737_LMICBOOST_MASK 0x0060 /* LMICBOOST - [6:5] */ +#define WM8737_LMICBOOST_SHIFT 5 /* LMICBOOST - [6:5] */ +#define WM8737_LMICBOOST_WIDTH 2 /* LMICBOOST - [6:5] */ +#define WM8737_LMBE 0x0010 /* LMBE */ +#define WM8737_LMBE_MASK 0x0010 /* LMBE */ +#define WM8737_LMBE_SHIFT 4 /* LMBE */ +#define WM8737_LMBE_WIDTH 1 /* LMBE */ +#define WM8737_LMZC 0x0008 /* LMZC */ +#define WM8737_LMZC_MASK 0x0008 /* LMZC */ +#define WM8737_LMZC_SHIFT 3 /* LMZC */ +#define WM8737_LMZC_WIDTH 1 /* LMZC */ +#define WM8737_LPZC 0x0004 /* LPZC */ +#define WM8737_LPZC_MASK 0x0004 /* LPZC */ +#define WM8737_LPZC_SHIFT 2 /* LPZC */ +#define WM8737_LPZC_WIDTH 1 /* LPZC */ +#define WM8737_LZCTO_MASK 0x0003 /* LZCTO - [1:0] */ +#define WM8737_LZCTO_SHIFT 0 /* LZCTO - [1:0] */ +#define WM8737_LZCTO_WIDTH 2 /* LZCTO - [1:0] */ + +/* + * R3 (0x03) - AUDIO path R + */ +#define WM8737_RINSEL_MASK 0x0180 /* RINSEL - [8:7] */ +#define WM8737_RINSEL_SHIFT 7 /* RINSEL - [8:7] */ +#define WM8737_RINSEL_WIDTH 2 /* RINSEL - [8:7] */ +#define WM8737_RMICBOOST_MASK 0x0060 /* RMICBOOST - [6:5] */ +#define WM8737_RMICBOOST_SHIFT 5 /* RMICBOOST - [6:5] */ +#define WM8737_RMICBOOST_WIDTH 2 /* RMICBOOST - [6:5] */ +#define WM8737_RMBE 0x0010 /* RMBE */ +#define WM8737_RMBE_MASK 0x0010 /* RMBE */ +#define WM8737_RMBE_SHIFT 4 /* RMBE */ +#define WM8737_RMBE_WIDTH 1 /* RMBE */ +#define WM8737_RMZC 0x0008 /* RMZC */ +#define WM8737_RMZC_MASK 0x0008 /* RMZC */ +#define WM8737_RMZC_SHIFT 3 /* RMZC */ +#define WM8737_RMZC_WIDTH 1 /* RMZC */ +#define WM8737_RPZC 0x0004 /* RPZC */ +#define WM8737_RPZC_MASK 0x0004 /* RPZC */ +#define WM8737_RPZC_SHIFT 2 /* RPZC */ +#define WM8737_RPZC_WIDTH 1 /* RPZC */ +#define WM8737_RZCTO_MASK 0x0003 /* RZCTO - [1:0] */ +#define WM8737_RZCTO_SHIFT 0 /* RZCTO - [1:0] */ +#define WM8737_RZCTO_WIDTH 2 /* RZCTO - [1:0] */ + +/* + * R4 (0x04) - 3D Enhance + */ +#define WM8737_DIV2 0x0080 /* DIV2 */ +#define WM8737_DIV2_MASK 0x0080 /* DIV2 */ +#define WM8737_DIV2_SHIFT 7 /* DIV2 */ +#define WM8737_DIV2_WIDTH 1 /* DIV2 */ +#define WM8737_3DLC 0x0040 /* 3DLC */ +#define WM8737_3DLC_MASK 0x0040 /* 3DLC */ +#define WM8737_3DLC_SHIFT 6 /* 3DLC */ +#define WM8737_3DLC_WIDTH 1 /* 3DLC */ +#define WM8737_3DUC 0x0020 /* 3DUC */ +#define WM8737_3DUC_MASK 0x0020 /* 3DUC */ +#define WM8737_3DUC_SHIFT 5 /* 3DUC */ +#define WM8737_3DUC_WIDTH 1 /* 3DUC */ +#define WM8737_3DDEPTH_MASK 0x001E /* 3DDEPTH - [4:1] */ +#define WM8737_3DDEPTH_SHIFT 1 /* 3DDEPTH - [4:1] */ +#define WM8737_3DDEPTH_WIDTH 4 /* 3DDEPTH - [4:1] */ +#define WM8737_3DE 0x0001 /* 3DE */ +#define WM8737_3DE_MASK 0x0001 /* 3DE */ +#define WM8737_3DE_SHIFT 0 /* 3DE */ +#define WM8737_3DE_WIDTH 1 /* 3DE */ + +/* + * R5 (0x05) - ADC Control + */ +#define WM8737_MONOMIX_MASK 0x0180 /* MONOMIX - [8:7] */ +#define WM8737_MONOMIX_SHIFT 7 /* MONOMIX - [8:7] */ +#define WM8737_MONOMIX_WIDTH 2 /* MONOMIX - [8:7] */ +#define WM8737_POLARITY_MASK 0x0060 /* POLARITY - [6:5] */ +#define WM8737_POLARITY_SHIFT 5 /* POLARITY - [6:5] */ +#define WM8737_POLARITY_WIDTH 2 /* POLARITY - [6:5] */ +#define WM8737_HPOR 0x0010 /* HPOR */ +#define WM8737_HPOR_MASK 0x0010 /* HPOR */ +#define WM8737_HPOR_SHIFT 4 /* HPOR */ +#define WM8737_HPOR_WIDTH 1 /* HPOR */ +#define WM8737_LP 0x0004 /* LP */ +#define WM8737_LP_MASK 0x0004 /* LP */ +#define WM8737_LP_SHIFT 2 /* LP */ +#define WM8737_LP_WIDTH 1 /* LP */ +#define WM8737_MONOUT 0x0002 /* MONOUT */ +#define WM8737_MONOUT_MASK 0x0002 /* MONOUT */ +#define WM8737_MONOUT_SHIFT 1 /* MONOUT */ +#define WM8737_MONOUT_WIDTH 1 /* MONOUT */ +#define WM8737_ADCHPD 0x0001 /* ADCHPD */ +#define WM8737_ADCHPD_MASK 0x0001 /* ADCHPD */ +#define WM8737_ADCHPD_SHIFT 0 /* ADCHPD */ +#define WM8737_ADCHPD_WIDTH 1 /* ADCHPD */ + +/* + * R6 (0x06) - Power Management + */ +#define WM8737_VMID 0x0100 /* VMID */ +#define WM8737_VMID_MASK 0x0100 /* VMID */ +#define WM8737_VMID_SHIFT 8 /* VMID */ +#define WM8737_VMID_WIDTH 1 /* VMID */ +#define WM8737_VREF 0x0080 /* VREF */ +#define WM8737_VREF_MASK 0x0080 /* VREF */ +#define WM8737_VREF_SHIFT 7 /* VREF */ +#define WM8737_VREF_WIDTH 1 /* VREF */ +#define WM8737_AI 0x0040 /* AI */ +#define WM8737_AI_MASK 0x0040 /* AI */ +#define WM8737_AI_SHIFT 6 /* AI */ +#define WM8737_AI_WIDTH 1 /* AI */ +#define WM8737_PGL 0x0020 /* PGL */ +#define WM8737_PGL_MASK 0x0020 /* PGL */ +#define WM8737_PGL_SHIFT 5 /* PGL */ +#define WM8737_PGL_WIDTH 1 /* PGL */ +#define WM8737_PGR 0x0010 /* PGR */ +#define WM8737_PGR_MASK 0x0010 /* PGR */ +#define WM8737_PGR_SHIFT 4 /* PGR */ +#define WM8737_PGR_WIDTH 1 /* PGR */ +#define WM8737_ADL 0x0008 /* ADL */ +#define WM8737_ADL_MASK 0x0008 /* ADL */ +#define WM8737_ADL_SHIFT 3 /* ADL */ +#define WM8737_ADL_WIDTH 1 /* ADL */ +#define WM8737_ADR 0x0004 /* ADR */ +#define WM8737_ADR_MASK 0x0004 /* ADR */ +#define WM8737_ADR_SHIFT 2 /* ADR */ +#define WM8737_ADR_WIDTH 1 /* ADR */ +#define WM8737_MICBIAS_MASK 0x0003 /* MICBIAS - [1:0] */ +#define WM8737_MICBIAS_SHIFT 0 /* MICBIAS - [1:0] */ +#define WM8737_MICBIAS_WIDTH 2 /* MICBIAS - [1:0] */ + +/* + * R7 (0x07) - Audio Format + */ +#define WM8737_SDODIS 0x0080 /* SDODIS */ +#define WM8737_SDODIS_MASK 0x0080 /* SDODIS */ +#define WM8737_SDODIS_SHIFT 7 /* SDODIS */ +#define WM8737_SDODIS_WIDTH 1 /* SDODIS */ +#define WM8737_MS 0x0040 /* MS */ +#define WM8737_MS_MASK 0x0040 /* MS */ +#define WM8737_MS_SHIFT 6 /* MS */ +#define WM8737_MS_WIDTH 1 /* MS */ +#define WM8737_LRP 0x0010 /* LRP */ +#define WM8737_LRP_MASK 0x0010 /* LRP */ +#define WM8737_LRP_SHIFT 4 /* LRP */ +#define WM8737_LRP_WIDTH 1 /* LRP */ +#define WM8737_WL_MASK 0x000C /* WL - [3:2] */ +#define WM8737_WL_SHIFT 2 /* WL - [3:2] */ +#define WM8737_WL_WIDTH 2 /* WL - [3:2] */ +#define WM8737_FORMAT_MASK 0x0003 /* FORMAT - [1:0] */ +#define WM8737_FORMAT_SHIFT 0 /* FORMAT - [1:0] */ +#define WM8737_FORMAT_WIDTH 2 /* FORMAT - [1:0] */ + +/* + * R8 (0x08) - Clocking + */ +#define WM8737_AUTODETECT 0x0080 /* AUTODETECT */ +#define WM8737_AUTODETECT_MASK 0x0080 /* AUTODETECT */ +#define WM8737_AUTODETECT_SHIFT 7 /* AUTODETECT */ +#define WM8737_AUTODETECT_WIDTH 1 /* AUTODETECT */ +#define WM8737_CLKDIV2 0x0040 /* CLKDIV2 */ +#define WM8737_CLKDIV2_MASK 0x0040 /* CLKDIV2 */ +#define WM8737_CLKDIV2_SHIFT 6 /* CLKDIV2 */ +#define WM8737_CLKDIV2_WIDTH 1 /* CLKDIV2 */ +#define WM8737_SR_MASK 0x003E /* SR - [5:1] */ +#define WM8737_SR_SHIFT 1 /* SR - [5:1] */ +#define WM8737_SR_WIDTH 5 /* SR - [5:1] */ +#define WM8737_USB_MODE 0x0001 /* USB MODE */ +#define WM8737_USB_MODE_MASK 0x0001 /* USB MODE */ +#define WM8737_USB_MODE_SHIFT 0 /* USB MODE */ +#define WM8737_USB_MODE_WIDTH 1 /* USB MODE */ + +/* + * R9 (0x09) - MIC Preamp Control + */ +#define WM8737_RBYPEN 0x0008 /* RBYPEN */ +#define WM8737_RBYPEN_MASK 0x0008 /* RBYPEN */ +#define WM8737_RBYPEN_SHIFT 3 /* RBYPEN */ +#define WM8737_RBYPEN_WIDTH 1 /* RBYPEN */ +#define WM8737_LBYPEN 0x0004 /* LBYPEN */ +#define WM8737_LBYPEN_MASK 0x0004 /* LBYPEN */ +#define WM8737_LBYPEN_SHIFT 2 /* LBYPEN */ +#define WM8737_LBYPEN_WIDTH 1 /* LBYPEN */ +#define WM8737_MBCTRL_MASK 0x0003 /* MBCTRL - [1:0] */ +#define WM8737_MBCTRL_SHIFT 0 /* MBCTRL - [1:0] */ +#define WM8737_MBCTRL_WIDTH 2 /* MBCTRL - [1:0] */ + +/* + * R10 (0x0A) - Misc Bias Control + */ +#define WM8737_VMIDSEL_MASK 0x000C /* VMIDSEL - [3:2] */ +#define WM8737_VMIDSEL_SHIFT 2 /* VMIDSEL - [3:2] */ +#define WM8737_VMIDSEL_WIDTH 2 /* VMIDSEL - [3:2] */ +#define WM8737_LINPUT1_DC_BIAS_ENABLE 0x0002 /* LINPUT1 DC BIAS ENABLE */ +#define WM8737_LINPUT1_DC_BIAS_ENABLE_MASK 0x0002 /* LINPUT1 DC BIAS ENABLE */ +#define WM8737_LINPUT1_DC_BIAS_ENABLE_SHIFT 1 /* LINPUT1 DC BIAS ENABLE */ +#define WM8737_LINPUT1_DC_BIAS_ENABLE_WIDTH 1 /* LINPUT1 DC BIAS ENABLE */ +#define WM8737_RINPUT1_DC_BIAS_ENABLE 0x0001 /* RINPUT1 DC BIAS ENABLE */ +#define WM8737_RINPUT1_DC_BIAS_ENABLE_MASK 0x0001 /* RINPUT1 DC BIAS ENABLE */ +#define WM8737_RINPUT1_DC_BIAS_ENABLE_SHIFT 0 /* RINPUT1 DC BIAS ENABLE */ +#define WM8737_RINPUT1_DC_BIAS_ENABLE_WIDTH 1 /* RINPUT1 DC BIAS ENABLE */ + +/* + * R11 (0x0B) - Noise Gate + */ +#define WM8737_NGTH_MASK 0x001C /* NGTH - [4:2] */ +#define WM8737_NGTH_SHIFT 2 /* NGTH - [4:2] */ +#define WM8737_NGTH_WIDTH 3 /* NGTH - [4:2] */ +#define WM8737_NGAT 0x0001 /* NGAT */ +#define WM8737_NGAT_MASK 0x0001 /* NGAT */ +#define WM8737_NGAT_SHIFT 0 /* NGAT */ +#define WM8737_NGAT_WIDTH 1 /* NGAT */ + +/* + * R12 (0x0C) - ALC1 + */ +#define WM8737_ALCSEL_MASK 0x0180 /* ALCSEL - [8:7] */ +#define WM8737_ALCSEL_SHIFT 7 /* ALCSEL - [8:7] */ +#define WM8737_ALCSEL_WIDTH 2 /* ALCSEL - [8:7] */ +#define WM8737_MAX_GAIN_MASK 0x0070 /* MAX GAIN - [6:4] */ +#define WM8737_MAX_GAIN_SHIFT 4 /* MAX GAIN - [6:4] */ +#define WM8737_MAX_GAIN_WIDTH 3 /* MAX GAIN - [6:4] */ +#define WM8737_ALCL_MASK 0x000F /* ALCL - [3:0] */ +#define WM8737_ALCL_SHIFT 0 /* ALCL - [3:0] */ +#define WM8737_ALCL_WIDTH 4 /* ALCL - [3:0] */ + +/* + * R13 (0x0D) - ALC2 + */ +#define WM8737_ALCZCE 0x0010 /* ALCZCE */ +#define WM8737_ALCZCE_MASK 0x0010 /* ALCZCE */ +#define WM8737_ALCZCE_SHIFT 4 /* ALCZCE */ +#define WM8737_ALCZCE_WIDTH 1 /* ALCZCE */ +#define WM8737_HLD_MASK 0x000F /* HLD - [3:0] */ +#define WM8737_HLD_SHIFT 0 /* HLD - [3:0] */ +#define WM8737_HLD_WIDTH 4 /* HLD - [3:0] */ + +/* + * R14 (0x0E) - ALC3 + */ +#define WM8737_DCY_MASK 0x00F0 /* DCY - [7:4] */ +#define WM8737_DCY_SHIFT 4 /* DCY - [7:4] */ +#define WM8737_DCY_WIDTH 4 /* DCY - [7:4] */ +#define WM8737_ATK_MASK 0x000F /* ATK - [3:0] */ +#define WM8737_ATK_SHIFT 0 /* ATK - [3:0] */ +#define WM8737_ATK_WIDTH 4 /* ATK - [3:0] */ + +/* + * R15 (0x0F) - Reset + */ +#define WM8737_RESET_MASK 0x01FF /* RESET - [8:0] */ +#define WM8737_RESET_SHIFT 0 /* RESET - [8:0] */ +#define WM8737_RESET_WIDTH 9 /* RESET - [8:0] */ + +#endif -- 1.7.1

2 1

[alsa-devel] sound playback became chopping on nfs rootfs
by Kuninori Morimoto 24 Nov '10

24 Nov '10

Dear all I noticed that sound playback became chopping on latest Linux kernel. I checked it by "git bisect". This chopping seems happen from below patch. How to modify this chopping ? I'm using SuperH ap4evb board. CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs ip=dhcp" ---------------------------------------------- commit 56463e50d1fc3f070492434cea6303b35ea000de Author: Chuck Lever <chuck.lever(a)oracle.com> Date: Fri Sep 17 10:54:37 2010 -0400 NFS: Use super.c for NFSROOT mount option parsing Replace duplicate code in NFSROOT for mounting an NFS server on '/' with logic that uses the existing mainline text-based logic in the NFS client. Add documenting comments where appropriate. Note that this means NFSROOT mounts now use the same default settings as v2/v3 mounts done via mount(2) from user space. vers=3,tcp,rsize=<negotiated default>,wsize=<negotiated default> As before, however, no version/protocol negotiation with the server is done. Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust(a)netapp.com> ---------------------------------------------- Best regards -- Kuninori Morimoto

2 4

Re: [alsa-devel] [PATCH] Acer 7730G support update.
by Denis Kup 24 Nov '10

24 Nov '10

Yes it is 70 MB in archived state and 266.6 when decompressed. After decompressing i have such folders in linux-2.6.37-rc3: drivers Documentation crypto block arch I have used find tool to locate sound folder and I have found it only in documentation. 2010/11/22 Takashi Iwai <tiwai(a)suse.de>: > At Mon, 22 Nov 2010 17:46:31 +0300, > Denis Kup wrote: >> >> There is no such directory in archive. > > You must be kidding. Double-check you downloaded the whole file. > It's 70M big in the compressed form. > > > Takashi > > >> 2010/11/22 Takashi Iwai <tiwai(a)suse.de>: >> > At Mon, 22 Nov 2010 15:40:31 +0300, >> > Denis Kup wrote: >> >> >> >> I can't find patch_realtek.c in this archive. Where should it be situated? >> > >> > It's in sound/pci/hda/patch_realtek.c. >> > >> > >> > Takashi >> > >> > >> >> 2010/11/22 Takashi Iwai <tiwai(a)suse.de>: >> >> > At Mon, 22 Nov 2010 15:24:16 +0300, >> >> > Denis Kup wrote: >> >> >> >> >> >> Do you mean that? >> >> >> http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.37-rc3.tar.bz2 >> >> > >> >> > Yes. >> >> > >> >> > >> >> > Takashi >> >> > >> >> >> 2010/11/22 Takashi Iwai <tiwai(a)suse.de>: >> >> >> > At Mon, 22 Nov 2010 13:51:45 +0300, >> >> >> > Denis Kup wrote: >> >> >> >> >> >> >> >> 2010/11/22 Takashi Iwai <tiwai(a)suse.de>: >> >> >> >> > At Mon, 8 Nov 2010 00:01:45 +0300, >> >> >> >> > Denis Kup wrote: >> >> >> >> >> >> >> >> >> >> [1 <multipart/alternative (7bit)>] >> >> >> >> >> [1.1 <text/plain; ISO-8859-1 (7bit)>] >> >> >> >> >> Hello! >> >> >> >> >> >> >> >> >> >> I want to commit patch that fix no-sound on acer 7730G laptop. All work >> >> >> >> >> history you can see here >> >> >> >> >> https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5123 . >> >> >> >> >> This patch for the latest snapshot, where this changes have been made: >> >> >> >> >> http://www.kerneltrap.com/mailarchive/git-commits-head/2010/5/20/35023 . >> >> >> >> >> >> >> >> >> >> Acer 7730G support patch. >> >> >> >> >> >> >> >> >> >> Changes: >> >> >> >> >> 1) Fixes automatic EAPD configuration on Acer 7730G laptop. >> >> >> >> >> >> >> >> >> >> Denis Kuplyakov <dener.kup(a)gmail.com> >> >> >> >> >> 8.11.10 00:00:50 >> >> >> >> > >> >> >> >> > [Sorry for the late reply - the mail was stuck in my output queue >> >> >> >> > without triggering for weeks!] >> >> >> >> > >> >> >> >> > Thanks for the patch. >> >> >> >> > Unfortunately, your patch isn't applicable as is to the latest code. >> >> >> >> > The patch gives fuzz and errors. >> >> >> >> > >> >> >> >> > Could you rebase your patch to the latest 2.6.37-rc kernel code? >> >> >> >> > >> >> >> >> > Also, don't forget to give your sign-off. It's simply a line like >> >> >> >> > Signed-off-by: Foo Bar <foo(a)bar.com> >> >> >> >> > >> >> >> >> > >> >> >> >> > thanks, >> >> >> >> > >> >> >> >> > Takashi >> >> >> >> > >> >> >> >> >> >> >> >> Can you send me a link to the latest version, that should I patch. >> >> >> > >> >> >> > It's Linus tree, e.g. 2.6.37-rc3 should suffice. >> >> >> > >> >> >> > >> >> >> > Takashi >> >> >> > >> >> >> >> >> > >> >> >> > >> >

2 5

[alsa-devel] ALSA throwing buffers away?
by Radivoje Jovanovic 23 Nov '10

23 Nov '10

Hello, I am developing driver for a really simple hardware. Hardware has codec that supports mono/stereo and the amplifier that supports only one speaker so the driver has to be mono driver and the codec is setup to manage mono data. I have setup ALSA with following parameters: .info = (SNDRV_PCM_INFO_NONINTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), .formats = SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_U8, .channels_min = 1, .channels_max = 1, Initially I was happy since sound started playing right away, but I noticed that songs are skipping. I created buffers that collect statistics about playback which is printed at the STOP trigger. The hardware is going through ALSA circular buffer correctly, and ALSA is filling the buffer as the hardware progresses, but after each buffer iteration ALSA skips the buffer length of the data?! For example: If buffer is .5 Mb ALSA will fill first .5Mb from the file into the buffer. As the hardware is playing the sound ALSA fills the buffer starting 1.0 Mb away from the begining of the file (the data from .5-1.0 Mb never makes it to the buffer). This pattern repeats constantly to the end of the song. I have tried SNDRV_PCM_INFO_INTERLEAVED with the same results (in this case ALSA will not even try to play stereo files using my mono driver). The files I tested are stereo and mono and they all behave the same. I am collecting ALSA info in the snd_pcm_lib_write1 method in the pcm_lib.c file. I was wondering if ALSA maybe deals with two circular buffers in the same time, or if anybody has an idea what is going on here? ~cheers, Ogi

2 4

[alsa-devel] [PATCH] ASoC: s3c24xx: test wrong variable
by Vasiliy Kulikov 23 Nov '10

23 Nov '10

After clk_get() mclk is checked three times instead of mout_epll and sclk_spdif checks. Signed-off-by: Vasiliy Kulikov <segoon(a)openwall.com> --- Cannot compile this driver, so it is not tested. sound/soc/s3c24xx/smdk_spdif.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c index 11c88b1..761e02b 100644 --- a/sound/soc/s3c24xx/smdk_spdif.c +++ b/sound/soc/s3c24xx/smdk_spdif.c @@ -38,7 +38,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev) } mout_epll = clk_get(NULL, "mout_epll"); - if (IS_ERR(fout_epll)) { + if (IS_ERR(mout_epll)) { printk(KERN_WARNING "%s: Cannot find mout_epll.\n", __func__); ret = -EINVAL; @@ -54,7 +54,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev) } sclk_spdif = clk_get(NULL, "sclk_spdif"); - if (IS_ERR(fout_epll)) { + if (IS_ERR(sclk_spdif)) { printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n", __func__); ret = -EINVAL; -- 1.7.0.4

4 4

[alsa-devel] [PATCH] alsa: support module on-demand loading for seq and timer
by Kay Sievers 23 Nov '10

23 Nov '10

From: Kay Sievers <kay.sievers(a)vrfy.org> Subject: alsa: support module on-demand loading for seq and timer If CONFIG_SND_DYNAMIC_MINORS is used, assign /dev/snd/seq and /dev/snd/timer the usual static minors, and export specific module aliases to generate udev module on-demand loading instructions: $ cat /lib/modules/$(uname -r)/modules.devname # Device nodes to trigger on-demand module loading. microcode cpu/microcode c10:184 fuse fuse c10:229 ppp_generic ppp c108:0 tun net/tun c10:200 uinput uinput c10:223 dm_mod mapper/control c10:236 snd_timer snd/timer c116:33 snd_seq snd/seq c116:1 The last two lines instruct udev to create device nodes, even when the modules are not loaded at that time. As soon as userspace accesses any of these nodes, the in-kernel module-loader will load the module, and the device can be used. The header file minor calculation needed to be simplified to make __stringify() (supports only two indirections) in the MODULE_ALIAS macro work. This is part of systemd's effort to get rid of unconditional module load instructions and needless init scripts. Cc: Lennart Poettering <lennart(a)poettering.net> Signed-off-by: Kay Sievers <kay.sievers(a)vrfy.org> --- diff --git a/include/sound/minors.h b/include/sound/minors.h index a81798a..8f76420 100644 --- a/include/sound/minors.h +++ b/include/sound/minors.h @@ -31,8 +31,8 @@ /* these minors can still be used for autoloading devices (/dev/aload*) */ #define SNDRV_MINOR_CONTROL 0 /* 0 */ #define SNDRV_MINOR_GLOBAL 1 /* 1 */ -#define SNDRV_MINOR_SEQUENCER (SNDRV_MINOR_GLOBAL + 0 * 32) -#define SNDRV_MINOR_TIMER (SNDRV_MINOR_GLOBAL + 1 * 32) +#define SNDRV_MINOR_SEQUENCER 1 /* SNDRV_MINOR_GLOBAL + 0 * 32 */ +#define SNDRV_MINOR_TIMER 33 /* SNDRV_MINOR_GLOBAL + 1 * 32 */ #ifndef CONFIG_SND_DYNAMIC_MINORS /* 2 - 3 (reserved) */ diff --git a/sound/core/seq/seq.c b/sound/core/seq/seq.c index bf09a5a..119fddb6 100644 --- a/sound/core/seq/seq.c +++ b/sound/core/seq/seq.c @@ -32,6 +32,7 @@ #include "seq_timer.h" #include "seq_system.h" #include "seq_info.h" +#include <sound/minors.h> #include <sound/seq_device.h> #if defined(CONFIG_SND_SEQ_DUMMY_MODULE) @@ -73,6 +74,9 @@ MODULE_PARM_DESC(seq_default_timer_subdevice, "The default timer subdevice numbe module_param(seq_default_timer_resolution, int, 0644); MODULE_PARM_DESC(seq_default_timer_resolution, "The default timer resolution in Hz."); +MODULE_ALIAS_CHARDEV(CONFIG_SND_MAJOR, SNDRV_MINOR_SEQUENCER); +MODULE_ALIAS("devname:snd/seq"); + /* * INIT PART */ diff --git a/sound/core/sound.c b/sound/core/sound.c index 66691fe..1c7a3ef 100644 --- a/sound/core/sound.c +++ b/sound/core/sound.c @@ -188,14 +188,22 @@ static const struct file_operations snd_fops = }; #ifdef CONFIG_SND_DYNAMIC_MINORS -static int snd_find_free_minor(void) +static int snd_find_free_minor(int type) { int minor; + /* static minors for module auto loading */ + if (type == SNDRV_DEVICE_TYPE_SEQUENCER) + return SNDRV_MINOR_SEQUENCER; + if (type == SNDRV_DEVICE_TYPE_TIMER) + return SNDRV_MINOR_TIMER; + for (minor = 0; minor < ARRAY_SIZE(snd_minors); ++minor) { - /* skip minors still used statically for autoloading devices */ - if (SNDRV_MINOR_DEVICE(minor) == SNDRV_MINOR_CONTROL || - minor == SNDRV_MINOR_SEQUENCER) + /* skip static minors still used for module auto loading */ + if (SNDRV_MINOR_DEVICE(minor) == SNDRV_MINOR_CONTROL) + continue; + if (minor == SNDRV_MINOR_SEQUENCER || + minor == SNDRV_MINOR_TIMER) continue; if (!snd_minors[minor]) return minor; @@ -269,7 +277,7 @@ int snd_register_device_for_dev(int type, struct snd_card *card, int dev, preg->private_data = private_data; mutex_lock(&sound_mutex); #ifdef CONFIG_SND_DYNAMIC_MINORS - minor = snd_find_free_minor(); + minor = snd_find_free_minor(type); #else minor = snd_kernel_minor(type, card, dev); if (minor >= 0 && snd_minors[minor]) diff --git a/sound/core/timer.c b/sound/core/timer.c index 13afb60..17df52a 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -52,6 +52,9 @@ MODULE_PARM_DESC(timer_limit, "Maximum global timers in system."); module_param(timer_tstamp_monotonic, int, 0444); MODULE_PARM_DESC(timer_tstamp_monotonic, "Use posix monotonic clock source for timestamps (default)."); +MODULE_ALIAS_CHARDEV(CONFIG_SND_MAJOR, SNDRV_MINOR_TIMER); +MODULE_ALIAS("devname:snd/timer"); + struct snd_timer_user { struct snd_timer_instance *timeri; int tread; /* enhanced read with timestamps and events */

2 4

[alsa-devel] [PATCH] MPC5200: Eliminate duplicate include of of_device.h
by Jesper Juhl 23 Nov '10

23 Nov '10

Eliminate duplicate #include <linux/of_device.h> from sound/soc/fsl/mpc5200_dma.c Signed-off-by: Jesper Juhl <jj(a)chaosbits.net> --- mpc5200_dma.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c index dce6b55..f92dca0 100644 --- a/sound/soc/fsl/mpc5200_dma.c +++ b/sound/soc/fsl/mpc5200_dma.c @@ -9,7 +9,6 @@ #include <linux/module.h> #include <linux/of_device.h> #include <linux/slab.h> -#include <linux/of_device.h> #include <linux/of_platform.h> #include <sound/soc.h> -- Jesper Juhl <jj(a)chaosbits.net> http://www.chaosbits.net/ Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html Plain text mails only, please.

2 1

[alsa-devel] Writing a driver for Sound Card
by Ramya Desai 23 Nov '10

23 Nov '10

Dear All, I am new to this Advanced Linux Sound Architecture (ALSA) driver. I developed a few drivers in Linux kernel environment for PCI based devices which are of type character and block. I am going through the following link for writing a driver for my custom sound card. http://www.kernel.org/pub/linux/kernel/people/tiwai/docs/writing-an-alsa-dr… I have a doubt about the Linux sound driver architecture. I need to develop the driver with mixer, player, recorder, MIDI etc. components. Do I need to develop these components in single driver OR Do I need to develop as a individual component (one driver for one component). I looked into the /usr/src/linux-2.6.35/sound directory. I did not understand it completely. Is there any driver (sample) which I can go through? Please let me know. Any help greatly appreciated and helpful to me. Thanks and Regards, Srinivas G

2 1

[alsa-devel] [PATCHv3] ASoC: Overhaul Samsung drivers
by Jassi Brar 23 Nov '10

23 Nov '10

From: Jassi Brar <jassi.brar(a)samsung.com> Hi, Submitting revised patch series. Since v2: a) Divided 'ASoC Samsung Add common I2S driver' into two. b) 'ARM Samsung Rename s3c64xx I2S platform device' based on plat tree As Kgene agreed to prepare a branch for Mark, platform related changes are based on his tree wherever possible. Patches for Kgene will be posted on Arm-Linux ml and those for Mark Brown, on ALSA ml, now that people have already 'seen' two versions of the patch series with same code but different segregation. Here is overview of patches:- For Kgene:- ************ S5PV310: DMA: Add platform devices for PL330 DMACs ARM: Samsung: Rename s3c64xx I2S platform device ARM: Samsung: Prepare audio header for new I2S driver ARM: S3C64XX: I2S: Upgrade platform device ARM: S5P64X0: I2S: Upgrade platform device ARM: S5P6442: I2S: Upgrade platform device ARM: S5PC100: I2S: Upgrade platform device ARM: S5PV210: I2S: Upgrade platform device ARM: S5PV310: Add audio platform devices For Mark :- *********** ASoC: Samsung: Remove redundant AQUILA driver ASoC: Samsung: Rename DMA device ARM: Samsung: Define common audio-dma device ASoC: Samsung: Rename ASoC DMA driver ASoC: Samsung: Rename AC97 platform device ASoC: Samsung: Rename AC97 driver ASoC: Samsung: Rename PCM driver ASoC: Samsung: Generalize DMA driver namespace ASoC: Samsung: Rename s3c64xx I2S device ASoC: Samsung: Add common I2S driver ASoC: SMARTQ: Move to use new I2S driver ASoC: GONI: Move to use new I2S driver ASoC: SMDK64XX: Move to use new I2S driver ASoC: S3C64XX: Remove obsoleted I2S drivers ASoC: SMDK64XX: Rename for other platforms ASoC: SMDK_WM8580: Enable for SMDKC100 ASoC: Samsung: Generalize Kconfig symbols ASoC: Samsung: Rename from s3c24xx to samsung Thanks. ************************************************* Since v1: a) Use case 16 in set_bfs and default for error b) Better code comments. c) Use switch case in i2sv2_i2s_set_clkdiv d) Use SNDRV_PCM_RATE_8000_96000 e) MAX_I2S -> SAMSUNG_I2S_SECOFF f) Local namespace cleanup with i2s driver. ------------ Here come patches overhauling the Samsung ASoC support. The AC97, PCM, SPDIF and ASoC-DMA related code has merely undergone cosmetic changes - symbol, device & driver renaming and file moving. A new I2S controller driver has been added to manage Samsung SoCs since S3C64XX. Older driver has been changed only as is necessary. Regarding I2S, I have left the s3c24xx series untouched because the controllers are too different to run by a common driver. S3C2412's I2S does have some similarities, but not important enough to warrant impact on new driver design. The new I2S driver has been designed around the notion of features/quirks. The newer SoCs have revised version of I2S_0(usually) than previous ones. So, I2S block is 'specified' in the platform code and the driver works on that configuration. For now, Secondary I2S DAI works only with System-DMAC. I2S-Internal DMA and SRAM will be enabled later. Testing:- Simple testing of 5.1 channel and hardware mixing seems to work (though there seems to be some issue with symmetric_rates in soc-core.c which would be tried to fix later as saperate issue). I would appreciate any test-results for GONI and SMARTQ. I suggest the patches 13,14,16 & 17 go via Kgene's Tree, and the rest via ASoC tree due to tight dependencies. 1). ASoC: Samsung: Remove redundant AQUILA driver 2). ASoC: Samsung: Rename DMA device 3). ARM: Samsung: Define common audio-dma device 4). ASoC: Samsung: Rename ASoC DMA driver 5). ASoC: Samsung: Rename AC97 platform device 6). ASoC: Samsung: Rename AC97 driver 7). ASoC: Samsung: Rename PCM driver 8). ASoC: Samsung: Generalize DMA driver namespace 9). ASoC: Samsung: Rename s3c64xx I2S device 10). ASoC: Samsung: Add common I2S driver 11). ARM: S3C64XX: I2S: Upgrade platform device 12). ARM: S5P6440: I2S: Upgrade platform device 13). ARM: S5P6442: I2S: Upgrade platform device 14). ARM: S5PC100: I2S: Upgrade platform device 15). ARM: S5PV210: I2S: Upgrade platform device 16). ARM: S5PV310: Add audio platform devices 17). ASoC: SMARTQ: Move to use new I2S driver 18). ASoC: GONI: Move to use new I2S driver 19). ASoC: SMDK64XX: Move to use new I2S driver 20). ASoC: S3C64XX: Remove obsoleted I2S drivers 21). ASoC: SMDK64XX: Rename for other platforms 22). ASoC: SMDK_WM8580: Enable for SMDKC100 23). ASoC: Samsung: Generalize Kconfig symbols 24). ASoC: Samsung: Rename from s3c24xx to samsung

3 45

[alsa-devel] [patch] pcm: add MMAP_EMUL to type names
by Dan Carpenter 23 Nov '10

23 Nov '10

If we try to print this then it causes a read past the end of the array in snd_pcm_type_name(). diff --git a/src/pcm/pcm.c b/src/pcm/pcm.c index 7409943..906b502 100644 --- a/src/pcm/pcm.c +++ b/src/pcm/pcm.c @@ -1633,6 +1633,7 @@ static const char *const snd_pcm_type_names[] = { PCMTYPE(SOFTVOL), PCMTYPE(IOPLUG), PCMTYPE(EXTPLUG), + PCMTYPE(MMAP_EMUL), }; static const char *const snd_pcm_subformat_names[] = {

2 1

[alsa-devel] [GIT PULL] ASoC updates for 2.6.38
by Liam Girdwood 23 Nov '10

23 Nov '10

Some updates for 2.6.38 too :- The following changes since commit 33ee617f4dad370bee016e4462e69481257453b0: Merge remote branch 'tiwai/topic/asoc' into for-2.6.38 (2010-11-03 14:18:42 +0000) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6.git for-2.6.38 Axel Lin (1): ASoC: Move kfree(twl4030) to twl4030_soc_remove() Jarkko Nikula (3): ASoC: tlv320aic3x: Use gpio_is_valid in checking for valid gpio_reset ASoC: tlv320aic3x: Add support to shared common reset line ASoC: tpa6130a2: Revisit power-up sequence sound/soc/codecs/tlv320aic3x.c | 32 +++++++++++++++++++++++++++----- sound/soc/codecs/tpa6130a2.c | 6 +++--- sound/soc/codecs/twl4030.c | 6 +++--- 3 files changed, 33 insertions(+), 11 deletions(-)

2 1

[alsa-devel] [GIT PULL] ASoC Fixes for 2.6.37
by Liam Girdwood 23 Nov '10

23 Nov '10

Hi Takashi, One fix for 2.6.37 now that you are back from vacation. Thanks Liam --- The following changes since commit 8f987768eb99631374f4ab0bb19cd062baf1397d: Merge commit 'v2.6.37-rc1' into for-2.6.37 (2010-11-03 14:11:27 +0000) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6.git for-2.6.37 Janusz Krzysztofik (1): ASoC: OMAP: fix OMAP1 compilation problem sound/soc/omap/omap-mcbsp.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)

2 1

[PATCH] ALSA: HDA: Remove unconnected PCM devices for Intel HDMI
by David Henningsson 23 Nov '10

23 Nov '10

Some newer chips have more than one HDMI output, but usually not all of them are exposed as physical jacks. Removing the unused PCM devices (as indicated by BIOS in the pin config default) will reduce user confusion as they currently have to choose between several HDMI devices, some of them not working anyway. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_hdmi.c | 41 ++++++++++++++++++++++++++++++++--------- 1 files changed, 32 insertions(+), 9 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index d3e49aa..14a1087 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -905,23 +905,28 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) spec->pin[spec->num_pins] = pin_nid; spec->num_pins++; - /* - * It is assumed that converter nodes come first in the node list and - * hence have been registered and usable now. - */ return hdmi_read_pin_conn(codec, pin_nid); } static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t nid) { + int i, found_pin = 0; struct hdmi_spec *spec = codec->spec; - if (spec->num_cvts >= MAX_HDMI_CVTS) { - snd_printk(KERN_WARNING - "HDMI: no space for converter %d\n", nid); - return -E2BIG; + for (i = 0; i < spec->num_pins; i++) + if (nid == spec->pin_cvt[i]) { + found_pin = 1; + break; + } + + if (!found_pin) { + snd_printdd("HDMI: Skipping node %d (no connection)\n", nid); + return -EINVAL; } + if (snd_BUG_ON(spec->num_cvts >= MAX_HDMI_CVTS)) + return -E2BIG; + spec->cvt[spec->num_cvts] = nid; spec->num_cvts++; @@ -932,6 +937,8 @@ static int hdmi_parse_codec(struct hda_codec *codec) { hda_nid_t nid; int i, nodes; + int num_tmp_cvts = 0; + hda_nid_t tmp_cvt[MAX_HDMI_CVTS]; nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid); if (!nid || nodes < 0) { @@ -942,6 +949,7 @@ static int hdmi_parse_codec(struct hda_codec *codec) for (i = 0; i < nodes; i++, nid++) { unsigned int caps; unsigned int type; + unsigned int config; caps = snd_hda_param_read(codec, nid, AC_PAR_AUDIO_WIDGET_CAP); type = get_wcaps_type(caps); @@ -951,17 +959,32 @@ static int hdmi_parse_codec(struct hda_codec *codec) switch (type) { case AC_WID_AUD_OUT: - hdmi_add_cvt(codec, nid); + if (num_tmp_cvts >= MAX_HDMI_CVTS) { + snd_printk(KERN_WARNING + "HDMI: no space for converter %d\n", nid); + continue; + } + tmp_cvt[num_tmp_cvts] = nid; + num_tmp_cvts++; break; case AC_WID_PIN: caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP); if (!(caps & (AC_PINCAP_HDMI | AC_PINCAP_DP))) continue; + + config = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_CONFIG_DEFAULT, 0); + if (get_defcfg_connect(config) == AC_JACK_PORT_NONE) + continue; + hdmi_add_pin(codec, nid); break; } } + for (i = 0; i < num_tmp_cvts; i++) + hdmi_add_cvt(codec, tmp_cvt[i]); + /* * G45/IbexPeak don't support EPSS: the unsolicited pin hot plug event * can be lost and presence sense verb will become inaccurate if the -- 1.7.1 --------------010608090904010905070207--

1 0

[alsa-devel] Changing default card using its name
by Pavel Hofman 23 Nov '10

23 Nov '10

Hi, Please excuse my ignorance but I have not been able to figure out this simple task. Nowadays most PCs have multiple soundcards (onboard plus HDMI, often another PCI card). Order of the cards is not stable. How do I define in /etc/asound.conf another default card using its name and keep the PCMs defined by its corresponding alsa card/pcm config files? In my case aplay -L: null Discard all samples (playback) or generate zero samples (capture) front:CARD=Intel,DEV=0 HDA Intel, STAC92xx Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, STAC92xx Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, STAC92xx Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, STAC92xx Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, STAC92xx Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, STAC92xx Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers hdmi:CARD=NVidia HDA NVidia, NVIDIA HDMI HDMI Audio Output front:CARD=CMI8768,DEV=0 C-Media CMI8768, C-Media PCI DAC/ADC Front speakers rear:CARD=CMI8768,DEV=0 C-Media CMI8768, C-Media PCI 2nd DAC Rear speakers surround40:CARD=CMI8768,DEV=0 C-Media CMI8768, C-Media PCI 2nd DAC 4.0 Surround output to Front and Rear speakers surround41:CARD=CMI8768,DEV=0 C-Media CMI8768, C-Media PCI 2nd DAC 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=CMI8768,DEV=0 C-Media CMI8768, C-Media PCI 2nd DAC 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=CMI8768,DEV=0 C-Media CMI8768, C-Media PCI 2nd DAC 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=CMI8768,DEV=0 C-Media CMI8768, C-Media PCI 2nd DAC 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=CMI8768,DEV=0 C-Media CMI8768, C-Media PCI DAC/ADC IEC958 (S/PDIF) Digital Audio Output Is it actually possible to have iec958:CARD=CMI8768,DEV=0 as the system-wide device iec958? I have not been successful with defaults.ctl.card "CMI8768" which IMO would have been the simplest solution. Thanks a lot for help. Regards, Pavel Hofman.

2 2

Re: [alsa-devel] nvidia initial sound being skipped
by David Shirley 23 Nov '10

23 Nov '10

Hi All, I just want to say I upgraded to kernel 2.6.36 today and still miss the first 0.5seconds or so of the sound output. Again I have ruled out player - mplayer, aplay and audacious all do it I have ruled out source format - both flac and the wav decoded version have the same problem. I have also ruled out physical connection to the AVR, both HDMI and SPDIF exhibit the same problem. Any ideas? Cheers Dave On 16 November 2010 20:57, David Shirley <tephra(a)gmail.com> wrote: > Hi Developers, > > I am using an nvidia MCP78 to connect to a Denon 1910 AVR via HDMI. > > I was using Kernel 2.6.32.21 and noticed that the initial few seconds > of my songs was being chopped off. > > After seeing http://www.spinics.net/lists/alsa-devel/msg29408.html I > upgraded to 2.6.35.8 (which has that fix in it) and the problem was > been reduced considerably. > > But it is still occurring to some extent. > > So to see if the HDMI was the problem I changed it to coax spdif - no > change/same problem. > > Now I think it could be mplayer, so I try audacious - no change/same problem. > > Now I think it could be the flac file/decoding, so I decode the flac > to wav and use aplay - no change/same problem. > > The ONLY way I can get the first 0.5seconds of the file to play is by > using audacious and then MANUALLY rewinding (by dragging the scroll > bar thingy) back to the start... then it will play (on either flac or > wav) > > Co-incidentally when I do this I get the following error message > dumped to console: > alsa: snd_pcm_prepare failed: Device or resource busy. > > I hope someone can help :) > > I am happy to get debug or whatever - just let me know what you need! > > mythtv@crystal:~$ aplay -l > **** List of PLAYBACK Hardware Devices **** > card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 0: NVidia [HDA NVidia], device 1: ALC1200 Digital [ALC1200 Digital] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > lspci -vvvv > 00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S > High Definition Audio (rev a1) > Subsystem: ASUSTeK Computer Inc. M3N72-D > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 (500ns min, 1250ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: HDA Intel > > Cheers > David >

2 7

[alsa-devel] [PATCH 2/3] ALSA: HDA: Rename "Front" to "Master Front" on ALC861VD and ALC887
by David Henningsson 23 Nov '10

23 Nov '10

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

3 7

Re: [alsa-devel] [PATCH] ASoC: Do not update the cache if write to hardware failed
by Peter Ujfalusi 23 Nov '10

23 Nov '10

On Tuesday 23 November 2010 08:14:07 ext Axel Lin wrote: > Signed-off-by: Axel Lin <axel.lin(a)gmail.com> > --- > sound/soc/codecs/tpa6130a2.c | 4 +++- > 1 files changed, 3 insertions(+), 1 deletions(-) > > diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c > index bfef3da..2d64502 100644 > --- a/sound/soc/codecs/tpa6130a2.c > +++ b/sound/soc/codecs/tpa6130a2.c > @@ -77,8 +77,10 @@ static int tpa6130a2_i2c_write(int reg, u8 value) > > if (data->power_state) { > val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value); > - if (val < 0) > + if (val < 0) { > dev_err(&tpa6130a2_client->dev, "Write failed\n"); > + return val; > + } > } > > /* Either powered on or off, we save the context */ Nice catch, thank you! CC-ing alsa-devel Acked-by: Peter Ujfalusi <peter.ujfalusi(a)nokia.com>

1 0

[PATCH 1/2] Move asound.state location to /var/lib/alsa/
by David B. Harris 23 Nov '10

23 Nov '10

/etc might be on a read-only partition which is not suitable for dynamic data such as the mixer settings. Hence move the location of asound.state to /var/lib. --- alsaconf/alsaconf.in | 4 ++-- alsactl/alsactl.1 | 4 ++-- alsactl/alsactl.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/alsaconf/alsaconf.in b/alsaconf/alsaconf.in index ccc1b37..b9815d1 100644 --- a/alsaconf/alsaconf.in +++ b/alsaconf/alsaconf.in @@ -956,8 +956,8 @@ If you have a big amplifier, lower your volumes or say no. aplay -N $TESTSOUND fi fi - if [ ! -r /etc/asound.state ]; then - xecho "Saving the mixer setup used for this in /etc/asound.state." + if [ ! -r /var/lib/alsa/asound.state ]; then + xecho "Saving the mixer setup used for this in /var/lib/alsa/asound.state." $sbindir/alsactl store fi clear diff --git a/alsactl/alsactl.1 b/alsactl/alsactl.1 index eb3cbd1..eb5968c 100644 --- a/alsactl/alsactl.1 +++ b/alsactl/alsactl.1 @@ -43,7 +43,7 @@ Print alsactl version number. .TP \fI\-f, \-\-file\fP -Select the configuration file to use. The default is /etc/asound.state. +Select the configuration file to use. The default is /var/lib/alsa/asound.state. .TP \fI\-F, \-\-force\fP @@ -90,7 +90,7 @@ The configuration file for init. By default, PREFIX/share/alsa/init/00main is used. .SH FILES -\fI/etc/asound.state\fP (or whatever file you specify with the +\fI/var/lib/alsa/asound.state\fP (or whatever file you specify with the \fB\-f\fP flag) is used to store current settings for your soundcards. The settings include all the usual soundcard mixer settings. More importantly, alsactl is diff --git a/alsactl/alsactl.c b/alsactl/alsactl.c index 3b5dfda..59f0738 100644 --- a/alsactl/alsactl.c +++ b/alsactl/alsactl.c @@ -30,7 +30,7 @@ #include <alsa/asoundlib.h> #include "alsactl.h" -#define SYS_ASOUNDRC "/etc/asound.state" +#define SYS_ASOUNDRC "/var/lib/alsa/asound.state" int debugflag = 0; int force_restore = 1; -- 1.7.3.2 --/04w6evG8XlLl3ft Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0002-alsactl-systemd-and-udev-hookup.patch"

1 0

[PATCH] Move asound.state location to /var/lib/alsa/ and add configure switch for it.
by Lennart Poettering 23 Nov '10

23 Nov '10

/etc might be on a read-only partition which is not suitable for dynamic data such as the mixer settings. Hence move the location of asound.state to /var/lib. This is based on a patch from Ubuntu/Debian which hardcoded the pah in /var/lib. --- Makefile.am | 3 +++ alsaconf/alsaconf.in | 5 +++-- alsactl/Makefile.am | 1 + alsactl/alsactl.1 | 4 ++-- alsactl/alsactl.c | 4 +++- configure.in | 6 ++++++ 6 files changed, 18 insertions(+), 5 deletions(-) diff --git a/Makefile.am b/Makefile.am index 62e1ba6..48a4780 100644 --- a/Makefile.am +++ b/Makefile.am @@ -38,5 +38,8 @@ dist-hook: $(TAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \ fi +install-data-hook: + $(MKDIR_P) -m 0755 $(DESTDIR)$(ASOUND_STATE_DIR) + DISTCHECK_CONFIGURE_FLAGS = \ --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir) diff --git a/alsaconf/alsaconf.in b/alsaconf/alsaconf.in index ccc1b37..cf87784 100644 --- a/alsaconf/alsaconf.in +++ b/alsaconf/alsaconf.in @@ -956,8 +956,9 @@ If you have a big amplifier, lower your volumes or say no. aplay -N $TESTSOUND fi fi - if [ ! -r /etc/asound.state ]; then - xecho "Saving the mixer setup used for this in /etc/asound.state." + mkdir -p -m 0755 @ASOUND_STATE_DIR@ + if [ ! -r @ASOUND_STATE_DIR@/asound.state ]; then + xecho "Saving the mixer setup used for this in @ASOUND_STATE_DIR@/asound.state." $sbindir/alsactl store fi clear diff --git a/alsactl/Makefile.am b/alsactl/Makefile.am index 9a2d30e..721b619 100644 --- a/alsactl/Makefile.am +++ b/alsactl/Makefile.am @@ -8,6 +8,7 @@ endif EXTRA_DIST=alsactl.1 alsactl_init.xml alsactl_SOURCES=alsactl.c state.c utils.c init_parse.c +alsactl_CFLAGS=$(AM_CFLAGS) -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\" noinst_HEADERS=alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c udevrulesdir=/lib/udev/rules.d diff --git a/alsactl/alsactl.1 b/alsactl/alsactl.1 index eb3cbd1..eb5968c 100644 --- a/alsactl/alsactl.1 +++ b/alsactl/alsactl.1 @@ -43,7 +43,7 @@ Print alsactl version number. .TP \fI\-f, \-\-file\fP -Select the configuration file to use. The default is /etc/asound.state. +Select the configuration file to use. The default is /var/lib/alsa/asound.state. .TP \fI\-F, \-\-force\fP @@ -90,7 +90,7 @@ The configuration file for init. By default, PREFIX/share/alsa/init/00main is used. .SH FILES -\fI/etc/asound.state\fP (or whatever file you specify with the +\fI/var/lib/alsa/asound.state\fP (or whatever file you specify with the \fB\-f\fP flag) is used to store current settings for your soundcards. The settings include all the usual soundcard mixer settings. More importantly, alsactl is diff --git a/alsactl/alsactl.c b/alsactl/alsactl.c index 3b5dfda..57436f7 100644 --- a/alsactl/alsactl.c +++ b/alsactl/alsactl.c @@ -30,7 +30,9 @@ #include <alsa/asoundlib.h> #include "alsactl.h" -#define SYS_ASOUNDRC "/etc/asound.state" +#ifndef SYS_ASOUNDRC +#define SYS_ASOUNDRC "/var/lib/alsa/asound.state" +#endif int debugflag = 0; int force_restore = 1; diff --git a/configure.in b/configure.in index 54ea74c..94a2b17 100644 --- a/configure.in +++ b/configure.in @@ -289,6 +289,12 @@ if test "x$with_systemdsystemunitdir" != xno; then fi AM_CONDITIONAL(HAVE_SYSTEMD, [test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ]) +AC_ARG_WITH(ASOUND_STATE_DIR, + AS_HELP_STRING([--with-asound-state-dir=DIR], [Directory to place asound.state file in]), + [ASOUND_STATE_DIR="$withval"], + [ASOUND_STATE_DIR="/var/lib/alsa"]) +AC_SUBST(ASOUND_STATE_DIR) + AC_OUTPUT(Makefile alsactl/Makefile alsactl/init/Makefile \ alsamixer/Makefile amidi/Makefile amixer/Makefile \ m4/Makefile po/Makefile.in \ -- 1.7.3.2 --Q68bSM7Ycu6FN28Q--

1 0

[PATCH 2/2] alsactl: systemd and udev hookup
by Lennart Poettering 23 Nov '10

23 Nov '10

Add minimal systemd and udev support to alsactl so that mixer settings are restored at boot, when sound cards are plugged in and saved on shutdown. This is similar to existing udev/init script solutions in various distributions. Note that alsactl is called both synchronously from the udev rules as well as asynchronously at boot. This is intended, and to ensure two things: - At boot the asound.state file might not be readable, since it resides on a different file system. That means exclusively restoring sound card settings from udev rules will no suffice, since if the rule is executed at early boot (for example within udev settle) then the file will no be readable and cannot be restored. - We need to ensure that applications monitoring sound cards coming and going (such as PA) must not get these events before the mixer settings have been restored. That means the mixer settings must be restored synchronously withing the udev rules, before the events are passed on to the apps. That basically means we need to restore the settings once in udev, to deal with sound cards becoming available during runtime. And once in early boot to deal with coldplugged soundcards whose data files might not have been available at time of plugging. Hence we call alsactl twice: one from the udev rule, and once from he systemd unit file. --- Makefile.am | 3 ++ alsactl/.gitignore | 3 ++ alsactl/90-alsa-restore.rules.in | 2 + alsactl/Makefile.am | 46 ++++++++++++++++++++++++++++++++++++++ alsactl/alsa-restore.service.in | 11 +++++++++ alsactl/alsa-store.service.in | 9 +++++++ configure.in | 17 +++++++++++-- 7 files changed, 88 insertions(+), 3 deletions(-) create mode 100644 alsactl/.gitignore create mode 100644 alsactl/90-alsa-restore.rules.in create mode 100644 alsactl/alsa-restore.service.in create mode 100644 alsactl/alsa-store.service.in diff --git a/Makefile.am b/Makefile.am index 9951c46..62e1ba6 100644 --- a/Makefile.am +++ b/Makefile.am @@ -37,3 +37,6 @@ dist-hook: else \ $(TAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \ fi + +DISTCHECK_CONFIGURE_FLAGS = \ + --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir) diff --git a/alsactl/.gitignore b/alsactl/.gitignore new file mode 100644 index 0000000..56ab3a2 --- /dev/null +++ b/alsactl/.gitignore @@ -0,0 +1,3 @@ +alsa-store.service +alsa-restore.service +90-alsa-restore.rules diff --git a/alsactl/90-alsa-restore.rules.in b/alsactl/90-alsa-restore.rules.in new file mode 100644 index 0000000..0bcee5b --- /dev/null +++ b/alsactl/90-alsa-restore.rules.in @@ -0,0 +1,2 @@ +ACTION=="add", SUBSYSTEM=="sound", KERNEL=="controlC*", KERNELS=="card*", \ + RUN+="@sbindir@/alsactl restore $attr{number}" diff --git a/alsactl/Makefile.am b/alsactl/Makefile.am index 359f73a..9a2d30e 100644 --- a/alsactl/Makefile.am +++ b/alsactl/Makefile.am @@ -10,5 +10,51 @@ EXTRA_DIST=alsactl.1 alsactl_init.xml alsactl_SOURCES=alsactl.c state.c utils.c init_parse.c noinst_HEADERS=alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c +udevrulesdir=/lib/udev/rules.d + +dist_udevrules_DATA = \ + 90-alsa-restore.rules + +if HAVE_SYSTEMD + +systemdsystemunit_DATA = \ + alsa-store.service \ + alsa-restore.service + +install-data-hook: + $(MKDIR_P) -m 0755 \ + $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants \ + $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants + ( cd $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants && \ + rm -f alsa-restore.service && \ + $(LN_S) ../alsa-restore.service alsa-restore.service ) + ( cd $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants && \ + rm -f alsa-store.service && \ + $(LN_S) ../alsa-store.service alsa-store.service ) + +endif + +edit = \ + sed $(SED) -r 's,@sbindir\@,$(sbindir),g' < $< > $@ || rm $@ + +alsa-store.service: alsa-store.service.in + $(edit) + +alsa-restore.service: alsa-restore.service.in + $(edit) + +90-alsa-restore.rules: 90-alsa-restore.rules.in + $(edit) + +EXTRA_DIST += \ + alsa-store.service.in \ + alsa-restore.service.in \ + 90-alsa-restore.rules.in + +CLEANFILES = \ + alsa-store.service \ + alsa-restore.service \ + 90-alsa-restore.rules + %.7: %.xml xmlto man $? diff --git a/alsactl/alsa-restore.service.in b/alsactl/alsa-restore.service.in new file mode 100644 index 0000000..e97d196 --- /dev/null +++ b/alsactl/alsa-restore.service.in @@ -0,0 +1,11 @@ +[Unit] +Description=Restore Sound Card State +DefaultDependencies=no +After=sysinit.target +Before=shutdown.target +Conflicts=shutdown.target + +[Service] +Type=oneshot +ExecStart=-@sbindir@/alsactl restore +StandardOutput=syslog diff --git a/alsactl/alsa-store.service.in b/alsactl/alsa-store.service.in new file mode 100644 index 0000000..0e2823c --- /dev/null +++ b/alsactl/alsa-store.service.in @@ -0,0 +1,9 @@ +[Unit] +Description=Store Sound Card State +DefaultDependencies=no +Before=shutdown.target + +[Service] +Type=oneshot +ExecStart=@sbindir@/alsactl store +StandardOutput=syslog diff --git a/configure.in b/configure.in index 31fd581..54ea74c 100644 --- a/configure.in +++ b/configure.in @@ -26,6 +26,7 @@ fi AC_PROG_CC dnl AC_PROG_CXX AC_PROG_INSTALL +AC_PROG_MKDIR_P AC_PROG_LN_S AM_PATH_ALSA(1.0.16) @@ -130,7 +131,7 @@ if test x$alsamixer = xtrue; then CURSES_CFLAGS=`ncursesw5-config --cflags` curseslib="ncursesw" else - AC_CHECK_LIB(ncursesw, initscr, + AC_CHECK_LIB(ncursesw, initscr, [ CURSESINC='<ncurses.h>'; CURSESLIB='-lncursesw'; curseslib="ncursesw"]) fi if test -n "$CURSESINC"; then @@ -147,12 +148,12 @@ if test x$alsamixer = xtrue; then CURSES_CFLAGS=`ncurses5-config --cflags` curseslib="ncurses" else - AC_CHECK_LIB(ncurses, initscr, + AC_CHECK_LIB(ncurses, initscr, [ CURSESINC='<ncurses.h>'; CURSESLIB='-lncurses'; curseslib="ncurses"]) fi fi if test "$curseslib" = "curses" -o "$curseslib" = "auto"; then - AC_CHECK_LIB(curses, initscr, + AC_CHECK_LIB(curses, initscr, [ CURSESINC='<curses.h>'; CURSESLIB='-lcurses'; curseslib="curses"]) fi if test -z "$CURSESINC"; then @@ -278,6 +279,16 @@ SAVE_UTIL_VERSION AC_SUBST(LIBRT) +dnl Check for systemd +PKG_PROG_PKG_CONFIG +AC_ARG_WITH([systemdsystemunitdir], + AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]), + [], [with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)]) +if test "x$with_systemdsystemunitdir" != xno; then + AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir]) +fi +AM_CONDITIONAL(HAVE_SYSTEMD, [test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ]) + AC_OUTPUT(Makefile alsactl/Makefile alsactl/init/Makefile \ alsamixer/Makefile amidi/Makefile amixer/Makefile \ m4/Makefile po/Makefile.in \ -- 1.7.3.2 --/04w6evG8XlLl3ft--

1 0

[alsa-devel] dell m4500 precision alsa-base.conf
by Adam Hamer 22 Nov '10

22 Nov '10

After searching on why my m4500 couldn't use the microphone I found out all the stuff about alsa. 1) A few web pages state 'let us know' if you find a configuration that works for your machine....but IT DOESN'T SAY WHO TO TELL! eg Reporting Problems in http://www.alsa-project.org/main/index.php/Help_To_Debug_Intel_HDA and http://www.alsa-project.org/main/index.php/Help_To_Debug 2) Anyway, I have those details for the m4500 so I am posting them here. This fix solved my internal microphone not working.I added 'options snd-hda-intel model=dell-s14' to the alsa-base.conf. I didn't try many others. I attach the files which are meant to be helpful for someone! Regards,adam

1 0

[alsa-devel] HDA Analyzer - Dell M4500 Internal Mic
by Tom Burger 22 Nov '10

22 Nov '10

Hi all! My mic didn't work (Dell M4500) . Using HDA Analyzer I create a configuration that does work. I read that I could send my working codec to here. So here it is. Maybe you can also tell me how te make this change permanent? Good luck, Tom Diff for codec 0/0 (0x111d76d5): --- +++ @@ -100,16 +100,17 @@ Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x90a60130: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE + Pin-ctls: 0x20: IN Unsolicited: tag=0x00, enabled=0 Power: setting=D0, actual=D0 Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Power: setting=D0, actual=D0 Connection: 1 0x20 @@ -121,37 +122,37 @@ Delay: 13 samples Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Amp-Out vals: [0x79 0x79] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo - Converter: stream=0, channel=0 + Converter: stream=1, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x17 Processing caps: benign=0, ncoeff=0 Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x18 Processing caps: benign=0, ncoeff=0 Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 - Amp-Out vals: [0x0f 0x0f] + Amp-Out vals: [0x00 0x00] Power: setting=D0, actual=D0 Connection: 7 - 0x0c 0x0e 0x0f 0x1b 0x11 0x12 0x0a* + 0x0c 0x0e 0x0f 0x1b 0x11* 0x12 0x0a Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Power: setting=D0, actual=D0 Connection: 7 0x0c 0x0e 0x0f 0x1b 0x11 0x12 0x0a* Node 0x19 [Audio Selector] wcaps 0x300501: Stereo Power: setting=D0, actual=D -- Tom Burger | tvburger(a)gmail.com | +31 (0)62 412 20 27 http://www.linkedin.com/in/tvburger

3 3

[alsa-devel] [PATCH] ASoC: atmel: test wrong variable
by Vasiliy Kulikov 22 Nov '10

22 Nov '10

After clk_get() mclk is checked second time instead of pllb check. Signed-off-by: Vasiliy Kulikov <segoon(a)openwall.com> --- Cannot compile this driver, so it is not tested. sound/soc/atmel/sam9g20_wm8731.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index da9c303..68072a2 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -223,7 +223,7 @@ static int __init at91sam9g20ek_init(void) } pllb = clk_get(NULL, "pllb"); - if (IS_ERR(mclk)) { + if (IS_ERR(pllb)) { printk(KERN_ERR "ASoC: Failed to get PLLB\n"); ret = PTR_ERR(mclk); goto err_mclk; -- 1.7.0.4

5 5

[alsa-devel] [PATCH] ASoC: Fix multi-component mismerge in WM8523
by Mark Brown 22 Nov '10

22 Nov '10

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8523.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c index d331888..bf44ec7 100644 --- a/sound/soc/codecs/wm8523.c +++ b/sound/soc/codecs/wm8523.c @@ -147,7 +147,6 @@ static int wm8523_startup(struct snd_pcm_substream *substream, return -EINVAL; } - return 0; snd_pcm_hw_constraint_list(substream->runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &wm8523->rate_constraint); -- 1.7.1

2 1

[alsa-devel] [PATCH] cm6206: turn off de-emphasis in s/pdif
by Eric Lammerts 22 Nov '10

22 Nov '10

Hi, I just bought a device with a CM6206. Thank you for the quirk that made it work out-of-the-box! I noticed on my DAC that the de-emphasis LED was on. Is this by accident? Below is a patch (based on the info in the CM6206+datasheet+1.7.pdf that I found somewhere) that turns it off. cheers, Eric Index: linux-2.6.36/sound/usb/quirks.c =================================================================== --- linux-2.6.36.orig/sound/usb/quirks.c 2010-11-16 18:55:51.000000000 -0500 +++ linux-2.6.36/sound/usb/quirks.c 2010-11-16 18:55:57.000000000 -0500 @@ -387,7 +387,7 @@ static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) { int err, reg; - int val[] = {0x200c, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000}; + int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000}; for (reg = 0; reg < ARRAY_SIZE(val); reg++) { err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);

4 6

Re: [alsa-devel] [PATCH] jack: use eventfd which never blocks.
by Alexander E. Patrakov 22 Nov '10

22 Nov '10

torbenh wrote: > i think in the case of mmap, there are one byte written -> advance one > period rules. these promises are not kept, when the write end is made > non-blocking. I was not aware of such rules. So, please disregard my review. -- Alexander E. Patrakov

2 1

[alsa-devel] [PATCH] Enable jack sense for Thinkpad Edge 11
by Manoj Iyer 22 Nov '10

22 Nov '10

This patch enables audio play back from external headphones on Thinkpad Edge 11. The following changes since commit 0c1c062266ecfeaebadadb780020a422f829284f: Manoj Iyer (1): Enable jack sense for Thinkpad Edge 11 are available in the git repository at: git://kernel.ubuntu.com/git/manjo/linux-2.6.git thinpad11

2 3

[alsa-devel] [PATCH 1/4] ASoC: Fix compile breakage in jz4740.c and smartq_wm8987.c
by Jarkko Nikula 22 Nov '10

22 Nov '10

Commit ce6120c require that soc-dapm.h cannot be included before soc.h but these two drivers were not checked. Fix them by including only soc.h as it includes soc-dapm.h. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- sound/soc/codecs/jz4740.c | 1 - sound/soc/s3c24xx/smartq_wm8987.c | 2 +- 2 files changed, 1 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c index 8a45562..f7cd346 100644 --- a/sound/soc/codecs/jz4740.c +++ b/sound/soc/codecs/jz4740.c @@ -22,7 +22,6 @@ #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/initval.h> -#include <sound/soc-dapm.h> #include <sound/soc.h> #define JZ4740_REG_CODEC_1 0x0 diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/s3c24xx/smartq_wm8987.c index 1f6da1e..5b07bb9 100644 --- a/sound/soc/s3c24xx/smartq_wm8987.c +++ b/sound/soc/s3c24xx/smartq_wm8987.c @@ -19,7 +19,7 @@ #include <sound/pcm.h> #include <sound/pcm_params.h> -#include <sound/soc-dapm.h> +#include <sound/soc.h> #include <sound/jack.h> #include <asm/mach-types.h> -- 1.7.0.4

3 5

[alsa-devel] [PATCH 0/5] [RFC]intel_hdmi_audio driver
by Babu, Ramesh 22 Nov '10

22 Nov '10

Hi Following emails are series of 5 patches for Intel MID HDMI audio driver. This driver is for the HDMI audio controller in upcoming Mobile Internet Devices (MID) platform from Intel. HDMI Audio Driver supports HDMI audio playback through ALSA interfaces. It interacts with the display driver to program the HDMI audio subsystem in the HDMI controller and receive hot plug/unplug events and DMA completion interrupts. HDMI audio driver is dependent on platform display driver. The dependant drivers for the platform are not yet available in the upstream. So please consider these patches only for RFC and provide your comments/suggestions. The patches are compiled with 0 warnings and checkpatch.pl The rest of the patches that follow have a brief description about the contents. Thanks Ramesh and Sailaja

1 0

[alsa-devel] [PATCH 0/5] [RFC]intel_hdmi_audio driver
by Babu, Ramesh 22 Nov '10

22 Nov '10

Hi Following emails are series of 5 patches for Intel MID HDMI audio driver. This driver is for the HDMI audio controller in upcoming Mobile Internet Devices (MID) platform from Intel. HDMI Audio Driver supports HDMI audio playback through ALSA interfaces. It interacts with the display driver to program the HDMI audio subsystem in the HDMI controller and receive hot plug/unplug events and DMA completion interrupts. HDMI audio driver is dependent on platform display driver. The dependant drivers for the platform are not yet available in the upstream. So please consider these patches only for RFC and provide your comments/suggestions. The patches are compiled with 0 warnings and checkpatch.pl The rest of the patches that follow have a brief description about the contents. Thanks Ramesh and Sailaja

1 0

[alsa-devel] [PATCH] ASoC: RX1950: Fix hw_params function
by Vasily Khoruzhick 22 Nov '10

22 Nov '10

Unfortunatelly, I misunderstood datasheet, and on s3c244x-iis when MPLLin source for master clock is selected, prescaler has no effect. Remove dividor calculation for 44100 rate; remove 88200 rate at all, rx1950 can't do it. Signed-off-by: Vasily Khoruzhick <anarsoul(a)gmail.com> --- sound/soc/s3c24xx/rx1950_uda1380.c | 20 +++----------------- 1 files changed, 3 insertions(+), 17 deletions(-) diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c index ffd5cf2..468cc11 100644 --- a/sound/soc/s3c24xx/rx1950_uda1380.c +++ b/sound/soc/s3c24xx/rx1950_uda1380.c @@ -50,7 +50,6 @@ static unsigned int rates[] = { 16000, 44100, 48000, - 88200, }; static struct snd_pcm_hw_constraint_list hw_rates = { @@ -130,7 +129,6 @@ static const struct snd_soc_dapm_route audio_map[] = { }; static struct platform_device *s3c24xx_snd_device; -static struct clk *xtal; static int rx1950_startup(struct snd_pcm_substream *substream) { @@ -179,10 +177,8 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream, case 44100: case 88200: clk_source = S3C24XX_CLKSRC_MPLL; - fs_mode = S3C2410_IISMOD_256FS; - div = clk_get_rate(xtal) / (256 * rate); - if (clk_get_rate(xtal) % (256 * rate) > (128 * rate)) - div++; + fs_mode = S3C2410_IISMOD_384FS; + div = 1; break; default: printk(KERN_ERR "%s: rate %d is not supported\n", @@ -210,7 +206,7 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream, /* set MCLK division for sample rate */ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, - S3C2410_IISMOD_384FS); + fs_mode); if (ret < 0) return ret; @@ -295,17 +291,8 @@ static int __init rx1950_init(void) goto err_plat_add; } - xtal = clk_get(&s3c24xx_snd_device->dev, "xtal"); - - if (IS_ERR(xtal)) { - ret = PTR_ERR(xtal); - platform_device_unregister(s3c24xx_snd_device); - goto err_clk; - } - return 0; -err_clk: err_plat_add: err_plat_alloc: err_gpio_conf: @@ -320,7 +307,6 @@ static void __exit rx1950_exit(void) platform_device_unregister(s3c24xx_snd_device); snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), hp_jack_gpios); - clk_put(xtal); gpio_free(S3C2410_GPA(1)); } -- 1.7.3.2

3 5

Re: [alsa-devel] [PATCH] Acer 7730G support update.
by Takashi Iwai 22 Nov '10

22 Nov '10

At Mon, 8 Nov 2010 00:01:45 +0300, Denis Kup wrote: > > [1 <multipart/alternative (7bit)>] > [1.1 <text/plain; ISO-8859-1 (7bit)>] > Hello! > > I want to commit patch that fix no-sound on acer 7730G laptop. All work > history you can see here > https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5123 . > This patch for the latest snapshot, where this changes have been made: > http://www.kerneltrap.com/mailarchive/git-commits-head/2010/5/20/35023 . > > Acer 7730G support patch. > > Changes: > 1) Fixes automatic EAPD configuration on Acer 7730G laptop. > > Denis Kuplyakov <dener.kup(a)gmail.com> > 8.11.10 00:00:50 [Sorry for the late reply - the mail was stuck in my output queue without triggering for weeks!] Thanks for the patch. Unfortunately, your patch isn't applicable as is to the latest code. The patch gives fuzz and errors. Could you rebase your patch to the latest 2.6.37-rc kernel code? Also, don't forget to give your sign-off. It's simply a line like Signed-off-by: Foo Bar <foo(a)bar.com> thanks, Takashi

2 4

[alsa-devel] ASoC updates for 2.6.38
by Mark Brown 22 Nov '10

22 Nov '10

The following changes since commit e53beacd23d9cb47590da6a7a7f6d417b941a994: Linux 2.6.37-rc2 (2010-11-15 18:31:02 -0800) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.38 This pull request is against -rc2 rather than topic/asoc as the merge of the Samsung DMA support from Jassi (which was applied by Kukjin and will be merged into both Samsung and ASoC trees to allow parallel development of things based on it) pulled it in. As a result all the changes you've already got in topic/asoc are already listed along with the new stuff. Arnaud Patard (3): ASoC: add support for alc562[123] codecs ASoC: kirkwood: Add audio support to hp t5325 thin clients ASoC: Add support for OpenRD Ultimate Axel Lin (9): ASoC: Fix snd_soc_register_dais error handling ASoC: Return proper error if snd_soc_register_dais fails in psc_i2s_of_probe ASoC: Fix compile error if CONFIG_DEBUG_FS is not configured ASoC: Fix incorrect kfree in ad1836_probe error path ASoC: Fix incorrect kfree in ad193x_probe error path ASoC: Fix incorrect kfree in aic3x_probe error path ASoC: Fix incorrect kfree in wm8731_probe error path ASoC: Fix incorrect kfree in wm8962_probe error path ASoC: uda134x - set reg_cache_default to uda134x_reg Chris Paulson-Ellis (1): ASoC: davinci: fixes for multi-component Dimitris Papastamos (8): ASoC: soc-cache: Remove unnecessary debugging info ASoC: WM8776: Removed unneeded struct member ASoC: WM8770: Initial driver ASoC: soc-cache: Use BUG_ON() for unsupported hw_read() calls ASoC: Remove unneeded use of address-of operator ASoC: soc-cache: Add support for flat register caching ASoC: soc-cache: Add support for LZO register caching ASoC: soc-cache: Add support for rbtree based register caching Jarkko Nikula (7): ASoC: Fix SND_SOC_ALL_CODECS typo for alc5623 ASoC: Add sound card directory under debugfs/asoc/ ASoC: Move codec debugfs directories under parent card directory ASoC: Move pop time from DAPM context to sound card ASoC: Update DAPM debug and error prints ASoC: Convert pop_dbg to use dev_info ASoC: Add optional name_prefix for codec kcontrol, widget and route names Jassi Brar (9): ARM: S5PV310: Add platform devices for PL330 DMACs ARM: SAMSUNG: Rename s3c64xx I2S platform device ARM: SAMSUNG: Prepare audio header for new I2S driver ARM: S3C64XX: Upgrade platform device for I2S ARM: S5P64X0: Upgrade platform device for I2S ARM: S5P6442: Upgrade platform device for I2S ARM: S5PC100: Upgrade platform device for I2S ARM: S5PV210: Upgrade platform device for I2S ARM: S5PV310: Add audio platform devices Jesse Marroquin (1): ASoC: Add support for MAX98089 CODEC Joe Perches (1): ASoC: Remove unnecessary semicolons Liam Girdwood (1): ASoC: Decouple DAPM from CODECs Marek Belisko (1): ASoC: s3c24xx: Fix compilation problem for mini2440 Mark Brown (31): ASoC: Store DC offset correction for wm_hubs devices in class W mode Merge branch 'for-2.6.37' into for-2.6.38 Merge branch 'for-2.6.37' into HEAD Merge remote branch 'takashi/fix/asoc' into for-2.6.37 ASoC: Check return value of strict_strtoul() in WM8962 ASoC: Convert soc-jack code to use request_any_context_irq() ASoC: Push snd_soc_write() and snd_soc_read() into the source file ASoC: Remove register write trace from WM8994 ASoC: Use pm_wakeup_event() in WM8962 jack detection Merge branch 'for-2.6.37' into HEAD ASoC: Lock the CODEC in PXA external jack controls Merge branch 'for-2.6.37' into for-2.6.38 Merge branch 'for-2.6.37' into HEAD ASoC: Remove broken WM8350 direction constants ASoC: Ensure sane WM835x AIF configuration by default Merge branch 'for-2.6.37' into for-2.6.38 ASoC: Factor out boiler plate for DAPM event generation ASoC: Add trace events for ASoC register read/write ASoC: Add DAPM trace events Merge branch 'for-2.6.37' into for-2.6.38 ASoC: Reset WM8962 with default ID value ASoC: Prevent system suspend while debouncing wakeup capable GPIO jacks ASoC: Fix dapm_seq_compare() for multi-component Merge branch 'for-2.6.37' into for-2.6.38 ASoC: Use DAPM context rather than CODEC when constructing sequences ASoC: Fix register cache setup WM8994 for multi-component Merge branch 'for-2.6.37' into for-2.6.38 ASoC: Provide ADC left/right channel source selection on WM8994 ASoC: Move WM8994 read/write access data into separate file Merge branch 'for-2.6.37' into for-2.6.38 Merge branch 'next-samsung-asoc' of git://git.kernel.org/.../kgene/linux-samsung into for-2.6.38 Ryan Mallon (1): Fix Atmel soc audio boards Kconfig dependency Sascha Hauer (6): ASoC i.MX eukrea tlv320: Fix for multicomponent ASoC i.MX phycore ac97: remove unnecessary includes ASoC i.MX: register dma audio device ASoC i.MX: switch to new DMA api phycore-ac97: add ac97 to cardname ASoC: i.MX: we can do mono Vasily Khoruzhick (1): ASoC: RX1950: Fix hw_params function arch/arm/mach-davinci/dm355.c | 6 +- arch/arm/mach-davinci/dm365.c | 6 +- arch/arm/mach-davinci/dm644x.c | 4 +- arch/arm/mach-kirkwood/openrd-setup.c | 2 +- arch/arm/mach-s3c64xx/clock.c | 2 +- arch/arm/mach-s3c64xx/dev-audio.c | 60 +- arch/arm/mach-s5p6442/dev-audio.c | 44 +- arch/arm/mach-s5p64x0/clock-s5p6440.c | 2 +- arch/arm/mach-s5p64x0/clock-s5p6450.c | 2 +- arch/arm/mach-s5p64x0/dev-audio.c | 55 +- arch/arm/mach-s5pc100/dev-audio.c | 54 +- arch/arm/mach-s5pv210/clock.c | 10 +- arch/arm/mach-s5pv210/dev-audio.c | 56 +- arch/arm/mach-s5pv310/Kconfig | 1 + arch/arm/mach-s5pv310/Makefile | 3 +- arch/arm/mach-s5pv310/dev-audio.c | 364 ++++++ arch/arm/mach-s5pv310/dma.c | 168 +++ arch/arm/mach-s5pv310/include/mach/dma.h | 26 + arch/arm/mach-s5pv310/include/mach/irqs.h | 3 + arch/arm/mach-s5pv310/include/mach/map.h | 21 + arch/arm/plat-samsung/include/plat/audio.h | 24 + arch/arm/plat-samsung/include/plat/devs.h | 9 + include/linux/mfd/wm8350/audio.h | 3 - include/sound/alc5623.h | 15 + include/sound/soc-dapm.h | 49 +- include/sound/soc.h | 72 +- include/trace/events/asoc.h | 176 +++ sound/soc/Kconfig | 2 + sound/soc/atmel/Kconfig | 5 +- sound/soc/atmel/playpaq_wm8510.c | 11 +- sound/soc/atmel/sam9g20_wm8731.c | 17 +- sound/soc/atmel/snd-soc-afeb9260.c | 13 +- sound/soc/codecs/88pm860x-codec.c | 9 +- sound/soc/codecs/Kconfig | 9 + sound/soc/codecs/Makefile | 6 +- sound/soc/codecs/ad1836.c | 6 +- sound/soc/codecs/ad193x.c | 6 +- sound/soc/codecs/ak4535.c | 9 +- sound/soc/codecs/ak4642.c | 2 +- sound/soc/codecs/ak4671.c | 9 +- sound/soc/codecs/alc5623.c | 1119 ++++++++++++++++ sound/soc/codecs/alc5623.h | 161 +++ sound/soc/codecs/cq93vc.c | 2 +- sound/soc/codecs/cs42l51.c | 5 +- sound/soc/codecs/cx20442.c | 15 +- sound/soc/codecs/da7210.c | 2 +- sound/soc/codecs/jz4740.c | 10 +- sound/soc/codecs/max98088.c | 23 +- sound/soc/codecs/ssm2602.c | 9 +- sound/soc/codecs/stac9766.c | 3 +- sound/soc/codecs/tlv320aic23.c | 9 +- sound/soc/codecs/tlv320aic3x.c | 23 +- sound/soc/codecs/tlv320dac33.c | 15 +- sound/soc/codecs/tpa6130a2.c | 5 +- sound/soc/codecs/twl4030.c | 13 +- sound/soc/codecs/twl6040.c | 12 +- sound/soc/codecs/uda134x.c | 3 +- sound/soc/codecs/uda1380.c | 13 +- sound/soc/codecs/wm2000.c | 5 +- sound/soc/codecs/wm8350.c | 37 +- sound/soc/codecs/wm8400.c | 11 +- sound/soc/codecs/wm8510.c | 11 +- sound/soc/codecs/wm8523.c | 11 +- sound/soc/codecs/wm8580.c | 13 +- sound/soc/codecs/wm8711.c | 9 +- sound/soc/codecs/wm8728.c | 11 +- sound/soc/codecs/wm8731.c | 14 +- sound/soc/codecs/wm8741.c | 9 +- sound/soc/codecs/wm8750.c | 11 +- sound/soc/codecs/wm8753.c | 29 +- sound/soc/codecs/wm8770.c | 750 +++++++++++ sound/soc/codecs/wm8770.h | 51 + sound/soc/codecs/wm8776.c | 10 +- sound/soc/codecs/wm8804.c | 6 +- sound/soc/codecs/wm8900.c | 11 +- sound/soc/codecs/wm8903.c | 11 +- sound/soc/codecs/wm8904.c | 35 +- sound/soc/codecs/wm8940.c | 6 +- sound/soc/codecs/wm8955.c | 11 +- sound/soc/codecs/wm8960.c | 25 +- sound/soc/codecs/wm8961.c | 11 +- sound/soc/codecs/wm8962.c | 40 +- sound/soc/codecs/wm8971.c | 29 +- sound/soc/codecs/wm8974.c | 11 +- sound/soc/codecs/wm8978.c | 11 +- sound/soc/codecs/wm8985.c | 11 +- sound/soc/codecs/wm8988.c | 9 +- sound/soc/codecs/wm8990.c | 11 +- sound/soc/codecs/wm8993.c | 13 +- sound/soc/codecs/wm8994-tables.c | 1575 +++++++++++++++++++++++ sound/soc/codecs/wm8994.c | 1629 +----------------------- sound/soc/codecs/wm8994.h | 9 + sound/soc/codecs/wm9081.c | 9 +- sound/soc/codecs/wm9090.c | 17 +- sound/soc/codecs/wm9705.c | 6 +- sound/soc/codecs/wm9712.c | 9 +- sound/soc/codecs/wm9713.c | 8 +- sound/soc/codecs/wm_hubs.c | 87 +- sound/soc/codecs/wm_hubs.h | 3 + sound/soc/davinci/davinci-evm.c | 61 +- sound/soc/davinci/davinci-i2s.c | 15 +- sound/soc/davinci/davinci-mcasp.c | 13 +- sound/soc/davinci/davinci-sffsdr.c | 2 +- sound/soc/davinci/davinci-vcif.c | 13 +- sound/soc/ep93xx/snappercl15.c | 5 +- sound/soc/fsl/mpc5200_psc_i2s.c | 2 +- sound/soc/imx/eukrea-tlv320.c | 8 +- sound/soc/imx/imx-pcm-dma-mx2.c | 221 ++-- sound/soc/imx/imx-ssi.c | 48 +- sound/soc/imx/imx-ssi.h | 4 + sound/soc/imx/phycore-ac97.c | 5 +- sound/soc/imx/wm1133-ev1.c | 7 +- sound/soc/jz4740/qi_lb60.c | 13 +- sound/soc/kirkwood/Kconfig | 11 +- sound/soc/kirkwood/Makefile | 2 + sound/soc/kirkwood/kirkwood-openrd.c | 2 +- sound/soc/kirkwood/kirkwood-t5325.c | 142 ++ sound/soc/omap/am3517evm.c | 13 +- sound/soc/omap/ams-delta.c | 82 +- sound/soc/omap/n810.c | 42 +- sound/soc/omap/omap3pandora.c | 44 +- sound/soc/omap/osk5912.c | 13 +- sound/soc/omap/rx51.c | 25 +- sound/soc/omap/sdp3430.c | 43 +- sound/soc/omap/sdp4430.c | 19 +- sound/soc/omap/zoom2.c | 35 +- sound/soc/pxa/corgi.c | 56 +- sound/soc/pxa/e740_wm9705.c | 29 +- sound/soc/pxa/e750_wm9705.c | 29 +- sound/soc/pxa/e800_wm9712.c | 7 +- sound/soc/pxa/magician.c | 39 +- sound/soc/pxa/mioa701_wm9713.c | 17 +- sound/soc/pxa/palm27x.c | 33 +- sound/soc/pxa/poodle.c | 30 +- sound/soc/pxa/saarb.c | 17 +- sound/soc/pxa/spitz.c | 74 +- sound/soc/pxa/tavorevb3.c | 17 +- sound/soc/pxa/tosa.c | 42 +- sound/soc/pxa/z2.c | 15 +- sound/soc/pxa/zylonite.c | 11 +- sound/soc/s3c24xx/Kconfig | 1 + sound/soc/s3c24xx/aquila_wm8994.c | 25 +- sound/soc/s3c24xx/goni_wm8994.c | 21 +- sound/soc/s3c24xx/jive_wm8750.c | 19 +- sound/soc/s3c24xx/neo1973_gta02_wm8753.c | 41 +- sound/soc/s3c24xx/neo1973_wm8753.c | 123 +- sound/soc/s3c24xx/rx1950_uda1380.c | 31 +- sound/soc/s3c24xx/s3c24xx_simtec_hermes.c | 15 +- sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c | 15 +- sound/soc/s3c24xx/smartq_wm8987.c | 21 +- sound/soc/s3c24xx/smdk64xx_wm8580.c | 16 +- sound/soc/s6000/s6105-ipcam.c | 40 +- sound/soc/sh/migor.c | 5 +- sound/soc/sh/sh7760-ac97.c | 2 +- sound/soc/soc-cache.c | 1002 ++++++++++++++- sound/soc/soc-core.c | 181 ++- sound/soc/soc-dapm.c | 579 +++++---- sound/soc/soc-jack.c | 23 +- 158 files changed, 7677 insertions(+), 3157 deletions(-) create mode 100644 arch/arm/mach-s5pv310/dev-audio.c create mode 100644 arch/arm/mach-s5pv310/dma.c create mode 100644 arch/arm/mach-s5pv310/include/mach/dma.h create mode 100644 include/sound/alc5623.h create mode 100644 include/trace/events/asoc.h create mode 100644 sound/soc/codecs/alc5623.c create mode 100644 sound/soc/codecs/alc5623.h create mode 100644 sound/soc/codecs/wm8770.c create mode 100644 sound/soc/codecs/wm8770.h create mode 100644 sound/soc/codecs/wm8994-tables.c create mode 100644 sound/soc/kirkwood/kirkwood-t5325.c

2 1

[alsa-devel] ASoC updates for 2.6.37
by Mark Brown 22 Nov '10

22 Nov '10

The following changes since commit 75e3f3137cb570661c2ad3035a139dda671fbb63: ASoC: tpa6130a2: Get rid of compile warning from tpa6130a2_power (2010-11-03 15:50:46 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.37 Mostly small fixes - a lot of them due to your holiday (hope you had a good time!). The big changes are the i.MX DMA update which was postponed until after the i.MX tree had been merged into mainline. The new support for the Maxim chip is just a new device ID, no functional code changes. Axel Lin (3): ASoC: Fix snd_soc_register_dais error handling ASoC: Return proper error if snd_soc_register_dais fails in psc_i2s_of_probe ASoC: uda134x - set reg_cache_default to uda134x_reg Chris Paulson-Ellis (1): ASoC: davinci: fixes for multi-component Dimitris Papastamos (1): ASoC: WM8776: Removed unneeded struct member Jesse Marroquin (1): ASoC: Add support for MAX98089 CODEC Marek Belisko (1): ASoC: s3c24xx: Fix compilation problem for mini2440 Mark Brown (7): Merge remote branch 'takashi/fix/asoc' into for-2.6.37 ASoC: Check return value of strict_strtoul() in WM8962 ASoC: Lock the CODEC in PXA external jack controls ASoC: Remove broken WM8350 direction constants ASoC: Ensure sane WM835x AIF configuration by default ASoC: Fix dapm_seq_compare() for multi-component ASoC: Fix register cache setup WM8994 for multi-component Ryan Mallon (1): Fix Atmel soc audio boards Kconfig dependency Sascha Hauer (5): ASoC i.MX eukrea tlv320: Fix for multicomponent ASoC i.MX phycore ac97: remove unnecessary includes ASoC i.MX: register dma audio device ASoC i.MX: switch to new DMA api phycore-ac97: add ac97 to cardname Vasily Khoruzhick (1): ASoC: RX1950: Fix hw_params function arch/arm/mach-davinci/dm355.c | 6 +- arch/arm/mach-davinci/dm365.c | 6 +- arch/arm/mach-davinci/dm644x.c | 4 +- include/linux/mfd/wm8350/audio.h | 3 - sound/soc/atmel/Kconfig | 5 +- sound/soc/codecs/max98088.c | 11 ++- sound/soc/codecs/uda134x.c | 1 + sound/soc/codecs/wm8350.c | 9 ++- sound/soc/codecs/wm8776.c | 1 - sound/soc/codecs/wm8962.c | 5 +- sound/soc/codecs/wm8994.c | 2 + sound/soc/davinci/davinci-evm.c | 40 +++++-- sound/soc/davinci/davinci-i2s.c | 15 ++- sound/soc/davinci/davinci-mcasp.c | 13 ++- sound/soc/davinci/davinci-sffsdr.c | 2 +- sound/soc/davinci/davinci-vcif.c | 13 ++- sound/soc/fsl/mpc5200_psc_i2s.c | 2 +- sound/soc/imx/eukrea-tlv320.c | 8 +- sound/soc/imx/imx-pcm-dma-mx2.c | 221 ++++++++++++++++-------------------- sound/soc/imx/imx-ssi.c | 44 +++++--- sound/soc/imx/imx-ssi.h | 4 + sound/soc/imx/phycore-ac97.c | 5 +- sound/soc/pxa/corgi.c | 5 + sound/soc/pxa/magician.c | 4 + sound/soc/pxa/poodle.c | 5 + sound/soc/pxa/spitz.c | 5 + sound/soc/pxa/tosa.c | 5 + sound/soc/s3c24xx/Kconfig | 1 + sound/soc/s3c24xx/rx1950_uda1380.c | 20 +--- sound/soc/soc-core.c | 9 +- sound/soc/soc-dapm.c | 4 +- 31 files changed, 268 insertions(+), 210 deletions(-)

2 1

[alsa-devel] [PATCH] ASoC: Restore WM8994 volatile and readable register operations
by Mark Brown 22 Nov '10

22 Nov '10

They went AWOL during the multi-component merge. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index de1447c..736cbf4 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3021,6 +3021,8 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8994 = { .resume = wm8994_resume, .read = wm8994_read, .write = wm8994_write, + .readable_register = wm8994_readable, + .volatile_register = wm8994_volatile, .set_bias_level = wm8994_set_bias_level, .reg_cache_size = WM8994_CACHE_SIZE, -- 1.7.1

1 0

[alsa-devel] [PATCH 1/3] ALSA: HDA: Create mixers on ALC887
by David Henningsson 22 Nov '10

22 Nov '10

BugLink: http://launchpad.net/bugs/669092 ALC887 does not have any volume control ability on the mixer NIDs, so put the volume controls on the dac NIDs instead. Without this patch, ALC887 users cannot use alsamixer at all. Cc: stable(a)kernel.org Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 2

[alsa-devel] Found bug in latest sound/pci/hda/patch_realtek.c from git, the bug is about jack sensing
by Kim Therkelsen 22 Nov '10

22 Nov '10

Hi, I think I have found a bug in patch_realtek.c. I have a 272X codec in my laptop and have discovered that it is only reported through the ALSA driver API when my headphone minijack is disconnected and not when it is connected. This is happening because alc_report_jack(...) is only called when the minijack connector is disconnected and not when it is connected. In order to make jack sensing work properly i modified patch_realtek.c and added alc_report_jack(codec, spec->autocfg.hp_pins[i]); at line 1132 (see code below). The code shown below is from: http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=blob;f=soun… 1118 static void alc_automute_speaker(struct hda_codec *codec, int pinctl) 1119 { 1120 struct alc_spec *spec = codec->spec; 1121 unsigned int mute; 1122 hda_nid_t nid; 1123 int i; 1124 1125 spec->jack_present = 0; 1126 for (i = 0; i < ARRAY_SIZE(spec->autocfg.hp_pins); i++) { 1127 nid = spec->autocfg.hp_pins[i]; 1128 if (!nid) 1129 break; 1130 if (snd_hda_jack_detect(codec, nid)) { 1131 spec->jack_present = 1; //ADDED BY KT: alc_report_jack(codec, spec->autocfg.hp_pins[i]); 1132 break; 1133 } 1134 alc_report_jack(codec, spec->autocfg.hp_pins[i]); 1135 } 1136 1137 mute = spec->jack_present ? HDA_AMP_MUTE : 0; 1138 /* Toggle internal speakers muting */ 1139 for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) { 1140 nid = spec->autocfg.speaker_pins[i]; 1141 if (!nid) 1142 break; 1143 if (pinctl) { 1144 snd_hda_codec_write(codec, nid, 0, 1145 AC_VERB_SET_PIN_WIDGET_CONTROL, 1146 spec->jack_present ? 0 : PIN_OUT); 1147 } else { 1148 snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0, 1149 HDA_AMP_MUTE, mute); 1150 } 1151 } 1152 } Best regards, Kim Therkelsen

1 0

[alsa-devel] [PATCH] ALSA: snd-atmel-abdac: test wrong variable
by Vasiliy Kulikov 22 Nov '10

22 Nov '10

After clk_get() pclk is checked second time instead of sample_clk check. Signed-off-by: Vasiliy Kulikov <segoon(a)openwall.com> --- Compile tested only. sound/atmel/abdac.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c index f2f41c8..4e47baa 100644 --- a/sound/atmel/abdac.c +++ b/sound/atmel/abdac.c @@ -420,7 +420,7 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev) return PTR_ERR(pclk); } sample_clk = clk_get(&pdev->dev, "sample_clk"); - if (IS_ERR(pclk)) { + if (IS_ERR(sample_clk)) { dev_dbg(&pdev->dev, "no sample clock\n"); retval = PTR_ERR(pclk); goto out_put_pclk; -- 1.7.0.4

2 2

Re: [alsa-devel] [PATCH] sound/mixart: avoid redefining {readl, write}_{le, be} accessors
by Takashi Iwai 22 Nov '10

22 Nov '10

At Fri, 12 Nov 2010 18:29:11 +0100, Florian Fainelli wrote: > > On Tuesday 09 November 2010 18:29:08 Florian Fainelli wrote: > > From: Florian Fainelli <florian(a)openwrt.org> > > Takashi, do you have any comments on this patch? Sorry for the late reply. Yes, I already applied it weeks ago, but the reply mail wasn't sent out but stuck in my output queue by some reason during my vacation. Anyway, thanks for the patch. I think it's OK in the way you did for the time being. Ideally, read*_be() should be defined on all platforms, though. Takashi > > Thanks! > > > > > If the platform already provides a definition for these accessors > > do not redefine them. The warning was caught on MIPS. > > > > Signed-off-by: Florian Fainelli <florian(a)openwrt.org> > > --- > > diff --git a/sound/pci/mixart/mixart_hwdep.h > > b/sound/pci/mixart/mixart_hwdep.h index a46f508..812e288 100644 > > --- a/sound/pci/mixart/mixart_hwdep.h > > +++ b/sound/pci/mixart/mixart_hwdep.h > > @@ -25,11 +25,21 @@ > > > > #include <sound/hwdep.h> > > > > +#ifndef readl_be > > #define readl_be(x) be32_to_cpu(__raw_readl(x)) > > +#endif > > + > > +#ifndef writel_be > > #define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr) > > +#endif > > > > +#ifndef readl_le > > #define readl_le(x) le32_to_cpu(__raw_readl(x)) > > +#endif > > + > > +#ifndef writel_le > > #define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr) > > +#endif > > > > #define MIXART_MEM(mgr,x) ((mgr)->mem[0].virt + (x)) > > #define MIXART_REG(mgr,x) ((mgr)->mem[1].virt + (x)) >

1 0

[alsa-devel] [PATCH 48/49] sound/oss/dev_table.c: Use vzalloc
by Joe Perches 22 Nov '10

22 Nov '10

Signed-off-by: Joe Perches <joe(a)perches.com> --- sound/oss/dev_table.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/oss/dev_table.c b/sound/oss/dev_table.c index 727bdb9..d8cf3e5 100644 --- a/sound/oss/dev_table.c +++ b/sound/oss/dev_table.c @@ -71,7 +71,7 @@ int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver, if (sound_nblocks >= MAX_MEM_BLOCKS) sound_nblocks = MAX_MEM_BLOCKS - 1; - op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_operations))); + op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct audio_operations))); sound_nblocks++; if (sound_nblocks >= MAX_MEM_BLOCKS) sound_nblocks = MAX_MEM_BLOCKS - 1; @@ -81,7 +81,6 @@ int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver, sound_unload_audiodev(num); return -(ENOMEM); } - memset((char *) op, 0, sizeof(struct audio_operations)); init_waitqueue_head(&op->in_sleeper); init_waitqueue_head(&op->out_sleeper); init_waitqueue_head(&op->poll_sleeper); @@ -128,7 +127,7 @@ int sound_install_mixer(int vers, char *name, struct mixer_operations *driver, /* FIXME: This leaks a mixer_operations struct every time its called until you unload sound! */ - op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct mixer_operations))); + op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct mixer_operations))); sound_nblocks++; if (sound_nblocks >= MAX_MEM_BLOCKS) sound_nblocks = MAX_MEM_BLOCKS - 1; @@ -137,7 +136,6 @@ int sound_install_mixer(int vers, char *name, struct mixer_operations *driver, printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name); return -ENOMEM; } - memset((char *) op, 0, sizeof(struct mixer_operations)); memcpy((char *) op, (char *) driver, driver_size); strlcpy(op->name, name, sizeof(op->name)); -- 1.7.3.1.g432b3.dirty

2 1

[alsa-devel] [PATCH] ALSA: hda: Use hp-laptop quirk to enable headphones automute for Asus A52J
by Daniel Chen 22 Nov '10

22 Nov '10

Hi, Please apply this patch against current sound-2.6 master HEAD to enable headphones automute for the bug reporter's laptop. Thanks, -Dan

2 1

[alsa-devel] [PATCH] azt3328: period bug fix (PulseAudio testing), add missing ACK on stop timer
by Andreas Mohr 22 Nov '10

22 Nov '10

ChangeLog: . Fix PulseAudio "ALSA driver bug" issue (if we have two alternated areas within a 64k DMA buffer, then max period size should obviously be 32k only). Back references: http://pulseaudio.org/wiki/AlsaIssues http://fedoraproject.org/wiki/Features/GlitchFreeAudio . In stop timer function, need to supply ACK in the timer control byte. . Minor log output correction When I did my first PA testing recently, the period size bug resulted in quite precisely observeable half-period-based playback distortion. PA-based operation is quite a bit more underrun-prone (despite its zero-copy optimizations etc.) than raw ALSA with this rather spartan sound hardware implementation on my puny Athlon. Note that even with this patch, azt3328 still doesn't work for both cases yet, PA tsched=0 and tsched (on tsched=0 it will playback tiny fragments of periods, leading to tiny stuttering sounds with some pauses in between, whereas with timer-scheduled operation playback works fine - minus some quite increased underrun trouble on PA vs. ALSA, that is). Patch runtime-tested on 2.6.36-rc8 git (and run through checkpatch.pl). Since 2.6 git log doesn't show patch activity it should still apply easily. I'd suggest handling this patch whichever way you want. If you already have a couple other -rc fixes, then perhaps simply include it, and I'm quite ambivalent about -stable handling as well. Thanks! Signed-off-by: Andreas Mohr <andi(a)lisas.de> diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index 4679ed8..2f3cacb 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -1129,10 +1129,11 @@ snd_azf3328_codec_setdmaa(struct snd_azf3328 *chip, count_areas = size/2; addr_area2 = addr+count_areas; - count_areas--; /* max. index */ snd_azf3328_dbgcodec("setdma: buffers %08lx[%u] / %08lx[%u]\n", addr, count_areas, addr_area2, count_areas); + count_areas--; /* max. index */ + /* build combined I/O buffer length word */ lengths = (count_areas << 16) | (count_areas); spin_lock_irqsave(&chip->reg_lock, flags); @@ -1740,11 +1741,15 @@ static const struct snd_pcm_hardware snd_azf3328_hardware = .rate_max = AZF_FREQ_66200, .channels_min = 1, .channels_max = 2, - .buffer_bytes_max = 65536, - .period_bytes_min = 64, - .period_bytes_max = 65536, - .periods_min = 1, - .periods_max = 1024, + .buffer_bytes_max = (64*1024), + .period_bytes_min = 1024, + .period_bytes_max = (32*1024), + /* We simply have two DMA areas (instead of a list of descriptors + such as other cards); I believe that this is a fixed hardware + attribute and there isn't much driver magic to be done to expand it. + Thus indicate that we have at least and at most 2 periods. */ + .periods_min = 2, + .periods_max = 2, /* FIXME: maybe that card actually has a FIFO? * Hmm, it seems newer revisions do have one, but we still don't know * its size... */ @@ -1980,8 +1985,13 @@ snd_azf3328_timer_stop(struct snd_timer *timer) chip = snd_timer_chip(timer); spin_lock_irqsave(&chip->reg_lock, flags); /* disable timer countdown and interrupt */ - /* FIXME: should we write TIMER_IRQ_ACK here? */ - snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0); + /* Hmm, should we write TIMER_IRQ_ACK here? + YES indeed, otherwise a rogue timer operation - which prompts + ALSA(?) to call repeated stop() in vain, but NOT start() - + will never end (value 0x03 is kept shown in control byte). + Simply manually poking 0x04 _once_ immediately successfully stops + the hardware/ALSA interrupt activity. */ + snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x04); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_azf3328_dbgcallleave(); return 0;

2 1

[alsa-devel] [PATCH] ALSA: hda: Add Samsung R720 SSID for subwoofer pin fixup
by Daniel Chen 22 Nov '10

22 Nov '10

Hi, Please apply the following patch against current sound-2.6 master HEAD to enable automuting of the subwoofer on the Samsung R720 when headphones are inserted. Thanks, -Dan

2 1

[alsa-devel] [PATCH 3/3] ALSA: HDA: Add Front control for ALC887
by David Henningsson 22 Nov '10

22 Nov '10

HP and Line out share DAC, so we need a switch to turn line out off. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 1

[alsa-devel] [PATCH 00/11] Remove unnecessary casts of pci_get_drvdata
by Joe Perches 22 Nov '10

22 Nov '10

Joe Perches (11): drivers/i2c/busses/i2c-nforce2.c: Remove unnecessary casts of pci_get_drvdata drivers/ide/pmac.c: Remove unnecessary casts of pci_get_drvdata drivers/media/dvb/ngene/ngene-core.c: Remove unnecessary casts of pci_get_drvdata drivers/misc/ibmasm/module.c: Remove unnecessary casts of pci_get_drvdata drivers/net/irda: Remove unnecessary casts of pci_get_drvdata drivers/net/s2io.c: Remove unnecessary casts of pci_get_drvdata drivers/net/vxge/vxge-main.c: Remove unnecessary casts of pci_get_drvdata drivers/scsi/be2iscsi/be_main.c: Remove unnecessary casts of pci_get_drvdata drivers/staging: Remove unnecessary casts of pci_get_drvdata drivers/usb/host/uhci-hcd.c: Remove unnecessary casts of pci_get_drvdata sound/pci/asihpi/hpioctl.c: Remove unnecessary casts of pci_get_drvdata drivers/i2c/busses/i2c-nforce2.c | 2 +- drivers/ide/pmac.c | 4 ++-- drivers/media/dvb/ngene/ngene-core.c | 2 +- drivers/misc/ibmasm/module.c | 2 +- drivers/net/irda/donauboe.c | 6 +++--- drivers/net/irda/vlsi_ir.c | 2 +- drivers/net/s2io.c | 3 +-- drivers/net/vxge/vxge-main.c | 28 ++++++++++++---------------- drivers/scsi/be2iscsi/be_main.c | 2 +- drivers/staging/crystalhd/crystalhd_lnx.c | 6 +++--- drivers/staging/et131x/et131x_initpci.c | 2 +- drivers/staging/wlags49_h2/wl_pci.c | 2 +- drivers/usb/host/uhci-hcd.c | 2 +- sound/pci/asihpi/hpioctl.c | 2 +- 14 files changed, 30 insertions(+), 35 deletions(-) -- 1.7.3.1.g432b3.dirty

2 2

[alsa-devel] [PATCH 00/44] remove unnecessary semicolons
by Joe Perches 22 Nov '10

22 Nov '10

ya trivial series... Joe Perches (44): arch/arm: Remove unnecessary semicolons arch/microblaze: Remove unnecessary semicolons arch/um: Remove unnecessary semicolons drivers/cpufreq: Remove unnecessary semicolons drivers/gpio: Remove unnecessary semicolons drivers/i2c: Remove unnecessary semicolons drivers/isdn: Remove unnecessary semicolons drivers/leds: Remove unnecessary semicolons drivers/media/video: Remove unnecessary semicolons drivers/misc: Remove unnecessary semicolons drivers/mmc: Remove unnecessary semicolons drivers/net/bnx2x: Remove unnecessary semicolons drivers/net/e1000e: Remove unnecessary semicolons drivers/net/ixgbe: Remove unnecessary semicolons drivers/net/vxge: Remove unnecessary semicolons drivers/net/wireless/ath: Remove unnecessary semicolons drivers/net/wireless/iwlwifi: Remove unnecessary semicolons drivers/net/cnic.c: Remove unnecessary semicolons drivers/platform/x86: Remove unnecessary semicolons drivers/power: Remove unnecessary semicolons drivers/s390/net: Remove unnecessary semicolons drivers/scsi/be2iscsi: Remove unnecessary semicolons drivers/scsi/bfa: Remove unnecessary semicolons drivers/scsi/lpfc: Remove unnecessary semicolons drivers/scsi/pm8001: Remove unnecessary semicolons drivers/scsi/qla2xxx: Remove unnecessary semicolons drivers/serial: Remove unnecessary semicolons drivers/spi: Remove unnecessary semicolons drivers/staging: Remove unnecessary semicolons drivers/usb/gadget: Remove unnecessary semicolons drivers/xen: Remove unnecessary semicolons fs/9p: Remove unnecessary semicolons fs/ceph: Remove unnecessary semicolons fs/logfs: Remove unnecessary semicolons fs/nfs: Remove unnecessary semicolons fs/ocfs2: Remove unnecessary semicolons fs/ubifs: Remove unnecessary semicolons include/linux/if_macvlan.h: Remove unnecessary semicolons include/net/caif/cfctrl.h: Remove unnecessary semicolons mm/hugetlb.c: Remove unnecessary semicolons net/ipv6/mcast.c: Remove unnecessary semicolons net/sunrpc/addr.c: Remove unnecessary semicolons sound/core/pcm_lib.c: Remove unnecessary semicolons sound/soc/codecs: Remove unnecessary semicolons arch/arm/mach-at91/at91cap9_devices.c | 2 +- arch/arm/mach-at91/at91sam9g45_devices.c | 2 +- arch/arm/mach-at91/at91sam9rl_devices.c | 2 +- arch/arm/mach-nuc93x/time.c | 2 +- arch/arm/mach-tegra/tegra2_clocks.c | 2 +- arch/arm/mach-w90x900/cpu.c | 2 +- arch/arm/plat-mxc/irq.c | 2 +- arch/microblaze/lib/memmove.c | 2 +- arch/um/drivers/mmapper_kern.c | 2 +- drivers/cpufreq/cpufreq_conservative.c | 2 +- drivers/gpio/langwell_gpio.c | 2 +- drivers/i2c/busses/i2c-designware.c | 2 +- drivers/isdn/hardware/mISDN/mISDNinfineon.c | 4 ++-- drivers/isdn/hardware/mISDN/mISDNisar.c | 2 +- drivers/leds/leds-mc13783.c | 2 +- drivers/media/video/cx88/cx88-blackbird.c | 2 +- drivers/media/video/davinci/vpfe_capture.c | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 2 +- drivers/misc/bmp085.c | 2 +- drivers/misc/isl29020.c | 2 +- drivers/mmc/host/davinci_mmc.c | 2 +- drivers/net/bnx2x/bnx2x_link.c | 4 ++-- drivers/net/bnx2x/bnx2x_main.c | 2 +- drivers/net/cnic.c | 2 +- drivers/net/e1000e/netdev.c | 2 +- drivers/net/ixgbe/ixgbe_sriov.c | 2 +- drivers/net/vxge/vxge-main.c | 2 +- drivers/net/wireless/ath/ath9k/htc.h | 2 +- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +- drivers/platform/x86/classmate-laptop.c | 2 +- drivers/platform/x86/thinkpad_acpi.c | 2 +- drivers/power/intel_mid_battery.c | 2 +- drivers/s390/net/qeth_core_sys.c | 2 +- drivers/scsi/be2iscsi/be_main.c | 4 ++-- drivers/scsi/bfa/bfa_fcs_lport.c | 2 +- drivers/scsi/lpfc/lpfc_bsg.c | 2 +- drivers/scsi/pm8001/pm8001_init.c | 2 +- drivers/scsi/qla2xxx/qla_isr.c | 4 ++-- drivers/scsi/qla2xxx/qla_nx.c | 2 +- drivers/serial/mrst_max3110.c | 2 +- drivers/spi/amba-pl022.c | 2 +- drivers/spi/spi_nuc900.c | 2 +- .../staging/ath6kl/hif/sdio/linux_sdio/src/hif.c | 2 +- drivers/staging/ath6kl/os/linux/ar6000_drv.c | 2 +- drivers/staging/bcm/InterfaceInit.c | 2 +- drivers/staging/bcm/InterfaceIsr.c | 2 +- drivers/staging/bcm/Misc.c | 4 ++-- .../comedi/drivers/addi-data/APCI1710_Tor.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1500.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1516.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3501.c | 2 +- drivers/staging/comedi/drivers/amplc_pci230.c | 2 +- drivers/staging/comedi/drivers/cb_das16_cs.c | 2 +- drivers/staging/comedi/drivers/comedi_bond.c | 2 +- drivers/staging/crystalhd/crystalhd_hw.c | 2 +- drivers/staging/go7007/go7007-driver.c | 2 +- drivers/staging/iio/accel/lis3l02dq_ring.c | 2 +- .../staging/intel_sst/intel_sst_drv_interface.c | 4 ++-- drivers/staging/keucr/smilmain.c | 4 ++-- drivers/staging/keucr/smilsub.c | 4 ++-- drivers/staging/msm/lcdc_toshiba_wvga_pt.c | 2 +- drivers/staging/rt2860/common/cmm_data_pci.c | 4 ++-- drivers/staging/rt2860/rt_linux.c | 2 +- drivers/staging/rt2860/rtmp.h | 2 +- drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c | 2 +- drivers/staging/rtl8192e/r819xE_phy.c | 2 +- drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c | 2 +- drivers/staging/rtl8192u/r8192U_core.c | 2 +- drivers/staging/rtl8192u/r819xU_phy.c | 2 +- drivers/staging/rtl8712/rtl8712_efuse.c | 2 +- drivers/staging/rtl8712/rtl8712_xmit.c | 2 +- drivers/staging/rtl8712/rtl871x_xmit.c | 2 +- drivers/staging/tidspbridge/core/tiomap3430.c | 4 ++-- drivers/staging/tidspbridge/rmgr/nldr.c | 2 +- drivers/staging/vt6655/card.c | 2 +- drivers/staging/vt6655/iwctl.c | 2 +- drivers/staging/vt6655/wpa2.c | 4 ++-- drivers/staging/vt6656/baseband.c | 2 +- drivers/staging/vt6656/iwctl.c | 2 +- drivers/staging/vt6656/power.c | 2 +- drivers/staging/vt6656/wpa2.c | 4 ++-- drivers/usb/gadget/f_fs.c | 2 +- drivers/xen/swiotlb-xen.c | 2 +- fs/9p/acl.c | 2 +- fs/9p/xattr.c | 2 +- fs/ceph/mds_client.c | 2 +- fs/logfs/readwrite.c | 2 +- fs/nfs/getroot.c | 2 +- fs/ocfs2/refcounttree.c | 2 +- fs/ubifs/scan.c | 2 +- include/linux/if_macvlan.h | 2 +- include/net/caif/cfctrl.h | 2 +- mm/hugetlb.c | 2 +- net/ipv6/mcast.c | 2 +- net/sunrpc/addr.c | 2 +- sound/core/pcm_lib.c | 2 +- sound/soc/codecs/wm8904.c | 2 +- sound/soc/codecs/wm8940.c | 1 - sound/soc/codecs/wm8993.c | 2 +- sound/soc/codecs/wm_hubs.c | 2 +- 100 files changed, 111 insertions(+), 112 deletions(-) -- 1.7.3.1.g432b3.dirty

9 37

Re: [alsa-devel] [PATCH 14/14] sound/ppc: Use printf extension %pR for struct resource
by Takashi Iwai 22 Nov '10

22 Nov '10

At Fri, 12 Nov 2010 13:38:04 -0800, Joe Perches wrote: > > Using %pR standardizes the struct resource output. > > Signed-off-by: Joe Perches <joe(a)perches.com> Applied now. Thanks. Takashi > --- > sound/ppc/pmac.c | 12 ++++-------- > 1 files changed, 4 insertions(+), 8 deletions(-) > > diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c > index 8508117..b47cfd4 100644 > --- a/sound/ppc/pmac.c > +++ b/sound/ppc/pmac.c > @@ -1228,10 +1228,8 @@ int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return) > chip->rsrc[i].start + 1, > rnames[i]) == NULL) { > printk(KERN_ERR "snd: can't request rsrc " > - " %d (%s: 0x%016llx:%016llx)\n", > - i, rnames[i], > - (unsigned long long)chip->rsrc[i].start, > - (unsigned long long)chip->rsrc[i].end); > + " %d (%s: %pR)\n", > + i, rnames[i], &chip->rsrc[i]); > err = -ENODEV; > goto __error; > } > @@ -1256,10 +1254,8 @@ int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return) > chip->rsrc[i].start + 1, > rnames[i]) == NULL) { > printk(KERN_ERR "snd: can't request rsrc " > - " %d (%s: 0x%016llx:%016llx)\n", > - i, rnames[i], > - (unsigned long long)chip->rsrc[i].start, > - (unsigned long long)chip->rsrc[i].end); > + " %d (%s: %pR)\n", > + i, rnames[i], &chip->rsrc[i]); > err = -ENODEV; > goto __error; > } > -- > 1.7.3.1.g432b3.dirty >

1 0

[alsa-devel] [PATCH] ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone controls
by David Henningsson 22 Nov '10

22 Nov '10

BugLink: https://launchpad.net/bugs/669279 The original reporter states: "The Master mixer does not change the volume from the headphone output (which is affected by the headphone mixer). Instead it only seems to control the on-board speaker volume. This confuses PulseAudio greatly as the Master channel is merged into the volume mix." Fix this symptom by applying the hp_only quirk for the reporter's SSID. The fix is applicable to all stable kernels. Reported-and-tested-by: Ben Gamari <bgamari(a)gmail.com> Cc: <stable(a)kernel.org> [2.6.32+] Signed-off-by: Daniel T Chen <crimsun(a)ubuntu.com> Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

2 1

[alsa-devel] [PATCH] jack: use eventfd which never blocks.
by Torben Hohn 21 Nov '10

21 Nov '10

the use of the socketpair for synchronisation is not correct. jack does not allow blocking calls in the process_callback, the socket buffers are quite small, and seem to overflow under some conditions. the result was write(2) blocking, and jack kicking the client. (jack needs to be running in RT mode, with a pretty low period size (<=128) but this really is the normal usecase) this patch uses eventfd(2) when its available to mitigate the problem. Signed-off-by: Torben Hohn <torbenh(a)gmx.de> --- configure.in | 5 +++++ jack/pcm_jack.c | 30 +++++++++++++++++++++++++++--- 2 files changed, 32 insertions(+), 3 deletions(-) diff --git a/configure.in b/configure.in index 5d71cae..9fa7f27 100644 --- a/configure.in +++ b/configure.in @@ -21,6 +21,11 @@ AC_CHECK_LIB(asound, snd_pcm_ioplug_create,, AC_ARG_ENABLE([jack], AS_HELP_STRING([--disable-jack], [Disable building of JACK plugin])) +AC_CHECK_HEADER([sys/eventfd.h], [HAVE_EVENTFD=yes], [HAVE_EVENTFD=no]) +if test "$HAVE_EVENTFD" = "yes"; then + AC_DEFINE(HAVE_EVENTFD, 1,"eventfd is available") +fi + if test "x$enable_jack" != "xno"; then PKG_CHECK_MODULES(JACK, jack >= 0.98, [HAVE_JACK=yes], [HAVE_JACK=no]) fi diff --git a/jack/pcm_jack.c b/jack/pcm_jack.c index 3370a26..83ac56a 100644 --- a/jack/pcm_jack.c +++ b/jack/pcm_jack.c @@ -20,6 +20,8 @@ * */ +#include "config.h" + #include <byteswap.h> #include <sys/shm.h> #include <sys/types.h> @@ -28,6 +30,10 @@ #include <alsa/asoundlib.h> #include <alsa/pcm_external.h> +#ifdef HAVE_EVENTFD +#include <sys/eventfd.h> +#endif + typedef enum _jack_format { SND_PCM_JACK_FORMAT_RAW } snd_pcm_jack_format_t; @@ -63,8 +69,10 @@ static void snd_pcm_jack_free(snd_pcm_jack_t *jack) } if (jack->fd >= 0) close(jack->fd); +#ifndef HAVE_EVENTFD if (jack->io.poll_fd >= 0) close(jack->io.poll_fd); +#endif free(jack->areas); free(jack); } @@ -81,11 +89,19 @@ static int snd_pcm_jack_poll_revents(snd_pcm_ioplug_t *io ATTRIBUTE_UNUSED, struct pollfd *pfds, unsigned int nfds, unsigned short *revents) { +#ifdef HAVE_EVENTFD + eventfd_t buf[1]; +#else static char buf[1]; - +#endif + assert(pfds && nfds == 1 && revents); - read(pfds[0].fd, buf, 1); + read(pfds[0].fd, buf, sizeof(buf)); +#ifdef HAVE_EVENTFD + buf[0] -= 1; + write(pfds[0].fd, buf, sizeof(buf)); +#endif *revents = pfds[0].revents; return 0; @@ -103,7 +119,11 @@ snd_pcm_jack_process_cb(jack_nframes_t nframes, snd_pcm_ioplug_t *io) snd_pcm_jack_t *jack = io->private_data; const snd_pcm_channel_area_t *areas; snd_pcm_uframes_t xfer = 0; +#ifdef HAVE_EVENTFD + static eventfd_t buf[1] = { 0x00000001 }; +#else static char buf[1]; +#endif unsigned int channel; for (channel = 0; channel < io->channels; channel++) { @@ -143,7 +163,7 @@ snd_pcm_jack_process_cb(jack_nframes_t nframes, snd_pcm_ioplug_t *io) xfer += frames; } - write(jack->fd, buf, 1); /* for polling */ + write(jack->fd, buf, sizeof(buf)); /* for polling */ return 0; } @@ -361,7 +381,11 @@ static int snd_pcm_jack_open(snd_pcm_t **pcmp, const char *name, return -ENOMEM; } +#ifdef HAVE_EVENTFD + fd[0] = fd[1] = eventfd(0, 0); +#else socketpair(AF_LOCAL, SOCK_STREAM, 0, fd); +#endif jack->fd = fd[0]; -- 1.7.1

2 1

[alsa-devel] Dubious assertion in alsa-lib
by Alexander E. Patrakov 21 Nov '10

21 Nov '10

Hello. In alsa-lib-1.0.23/src/pcm/pcm_plug.c, there are two assertions of the form: assert(snd_pcm_format_linear(slv->format)); in snd_pcm_plug_change_rate() and snd_pcm_plug_change_channels() functions, respectively. While in snd_pcm_plug_change_rate() this looks reasonable, it is IMHO invalid in snd_pcm_plug_change_channels(). I say this because this can be triggered with the following .asoundrc: pcm.jackplug { type plug slave.pcm { type jack playback_ports { 0 system:playback_1 1 system:playback_2 } capture_ports { 0 system:capture_1 1 system:capture_2 } client_name "alsa" } } and the following command: aplay -r 44100 -c 1 -f FLOAT_LE -D jackplug /dev/zero JACK is configured to accept stereo audio, with 44100 Hz sampling rate, so only the number of channels has to be changed by the plug here. I.e., rerouting channels by copying samples makes perfect sense not only for linear formats, but also for floating-point ones. -- Alexander E. Patrakov

1 0

[alsa-devel] [PATCH 0/3] ASoC: add support for audio on iPaq hx4700
by Dmitry Artamonow 20 Nov '10

20 Nov '10

Here's three patches adding support for audio on iPaq hx4700 PDA. AK4641 codec driver was originally written by Harald Welte for gnufiish project [1], then Philipp Zabel adapted it to use on hx4700. I picked Philipp's patches from his git repository[2], updated them to current kernel and also fixed all the issues I've met while using these patches on my hx4700 device. So now I would like to submit these patches for review in hope they could be included in 2.6.38. This patchset is based on linux-next-20101119 [1] http://gnufiish.org [2] http://git.linuxtogo.org/?p=ph5/kernel.git;a=summary Dmitry Artamonow (2): ASoC: Asahi Kasei AK4641 codec driver ASoC: add iPAQ hx4700 machine driver Philipp Zabel (1): pxa/hx4700: add I2C board info for AK4641 codec arch/arm/mach-pxa/hx4700.c | 18 + arch/arm/mach-pxa/include/mach/hx4700.h | 4 +- include/sound/ak4641.h | 26 ++ sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ak4641.c | 628 +++++++++++++++++++++++++++++++ sound/soc/codecs/ak4641.h | 47 +++ sound/soc/pxa/Kconfig | 9 + sound/soc/pxa/Makefile | 2 + sound/soc/pxa/hx4700.c | 253 +++++++++++++ 10 files changed, 991 insertions(+), 2 deletions(-) create mode 100644 include/sound/ak4641.h create mode 100644 sound/soc/codecs/ak4641.c create mode 100644 sound/soc/codecs/ak4641.h create mode 100644 sound/soc/pxa/hx4700.c

3 6

[alsa-devel] alsa jack plugin
by torbenh 19 Nov '10

19 Nov '10

the alsa jack plugin has quite some problems: a) does not work correctly with mplayers alsa output. (and quite a few others) b) it includes the pid in its clientname. c) it requires port connections. d) jack client is deactivated when alsa stream is not active. e) no way to set the jack clientname the master branch on git://hochstrom.endofinternet.org/alsa-plugins carries fixes for a, b and e. c and d have their own branches. i have seen a few problems with making the write end of the fd non-blocking. would it be possible to use eventfd(2) for this ? -- torben Hohn

3 5

[alsa-devel] About CS42L52---Where to find CS42L52 ASoC driver
by James Liu 19 Nov '10

19 Nov '10

Hello ,guys where to find CS42L52 ASoC driver? I have cloned the alsa-kernel.git and alsa-asoc.git tree,but no CS42L52 device driver. Please tell me the download site. Thanks James Liu

2 4

[alsa-devel] snd_pcm_mmap_commit
by Irfan Shaikh 19 Nov '10

19 Nov '10

/*************************************************************/ Code below O/p results runs in a while loop till end of PCM data. 1) First time O/p is Farames available : 1024 /*Return VALUE of snd_pcm_avail_update*/ >>>>>>>>>>>>>>>>>>>>>>>>>Begin result : 0 /*Return VALUE of snd_pcm_mmap_begin*/ Address outbuffer : 0xcff88 >>>>>>>>>>>>>>>>>>>>>>Comit result : 1024 /*SUCESSFUL - Return VALUE of snd_pcm_mmap_commi*/ 2) Second time onwards ALWAYS O/p is Farames available : 0 /*Return VALUE of snd_pcm_avail_update*/ >>>>>>>>>>>>>>>>>>>>>>>>>Begin result : 0 /*Return VALUE of snd_pcm_mmap_begin*/ Address outbuffer : 0xcff88 >>>>>>>>>>>>>>>>>>>>>>Comit result : 0 /*FAILURE - Return VALUE of snd_pcm_mmap_commit*/ . . . . . . N) Nth time Farames available : 0 /*Return VALUE of snd_pcm_avail_update*/ >>>>>>>>>>>>>>>>>>>>>>>>>Begin result : 0 /*Return VALUE of snd_pcm_mmap_begin*/ Address outbuffer : 0xcff88 >>>>>>>>>>>>>>>>>>>>>>Comit result : 0 /*FAILURE - Return VALUE of snd_pcm_mmap_commit*/ . /*************************************************************/ +++++++++++++++ Why second time onwards I get the above behavious what am i missing ? Please HELP ! +++++++++++++++ ############ MY CODE ############# #ifdef DIRECT snd_pcm_sframes_t frames_available, frames_transmit; const snd_pcm_channel_area_t *area; snd_pcm_uframes_t offset; unsigned char *outbuffer; int result,i; /*available space in audio-buffer to write to*/ frames_available = snd_pcm_avail_update(alsaParams->pcm_handle); printf("Farames available : %d\n", frames_available); /* * prepare the areas * and get back area, offset and frames_transmit * frames_transmit gives back the REAL value of available frames which could be written to in the mmaped-area * frames_transmit are less than frames_available */ frames_transmit = frames_available; if( 0 > ( result = snd_pcm_mmap_begin(alsaParams->pcm_handle, &area, &offset, &frames_transmit))) { printf("===========================>>>>>>>>>>>>>>>>>>>>>snd_pcm_mmap_begin_error\n"); xrun_recovery(alsaParams->pcm_handle, pcmreturn); return; //return xrun_recovery(); } printf(">>>>>>>>>>>>>>>>>>>>>>>>>Begin result : %d\n", result); utbuffer = ((char *) area->addr + (area->first + area->step * offset)/ 8); printf("Address outbuffer : %p\n", outbuffer); memcpy(outbuffer, data, count); //data is actual data /*gives back the virtually written (writable) frames which should be always == frames_transmit*/ if( 0 > ( result = snd_pcm_mmap_commit(alsaParams->pcm_handle, offset, frames_transmit))) { printf("==============================>>>>>>>>>>>>>>>>>>>>>>>>snd_pcm_mmap_commit error\n"); xrun_recovery(alsaParams->pcm_handle, pcmreturn); return; //return xrun_recovery(); } printf(">>>>>>>>>>>>>>>>>>>>>>Comit result : %d\n", result); #endif SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html

2 2

[alsa-devel] snd_pcm_writei VS snd_pcm_mmap_writei
by Irfan Shaikh 19 Nov '10

19 Nov '10

Hello, Please tell me a) Difference between working of snd_pcm_mmap_writei and snd_pcm_writei ? b) Performance wise which is better ? When i use gettimeofday almost profile time comes almost same for both of them. Thanks and Regards, Irfan SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html

3 2

[PATCH] Enable jack sense for Thinkpad Edge 11
by Manoj Iyer 18 Nov '10

18 Nov '10

Signed-off-by: Manoj Iyer <manoj.iyer(a)canonical.com> --- sound/pci/hda/patch_conexant.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.= c index 6361f75..b8d6554 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3108,6 +3108,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] =3D { SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD), + SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT5066_THINKPAD)= , SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD), --=20 1.7.0.4 > > > thanks, > > Takashi > >> >> On Thu, Nov 18, 2010 at 4:35 PM, Manoj Iyer <manoj.iyer(a)canonical.com> w= rote: >> > This patch enables audio play back from external headphones on Thinkpa= d Edge 11. >> > >> > The following changes since commit 0c1c062266ecfeaebadadb780020a422f82= 9284f: >> > =A0Manoj Iyer (1): >> > =A0 =A0 =A0 =A0Enable jack sense for Thinkpad Edge 11 >> > >> > are available in the git repository at: >> > >> > =A0git://kernel.ubuntu.com/git/manjo/linux-2.6.git thinpad11 >> > >> > From 89796b0608f0c36cbd05d0426e95386766ff20b9 Mon Sep 17 00:00:00 2001 >> > From: Manoj Iyer <manoj.iyer(a)canonical.com> >> > Date: Thu, 18 Nov 2010 21:24:42 +0000 >> > Subject: [PATCH] Enable jack sense for Thinkpad Edge 11 >> > >> > Signed-off-by: Manoj Iyer <manoj.iyer(a)canonical.com> >> > --- >> > =A0sound/pci/hda/patch_conexant.c | =A0 =A01 + >> > =A01 files changed, 1 insertions(+), 0 deletions(-) >> > >> > diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_cone= xant.c >> > index 6361f75..b8d6554 100644 >> > --- a/sound/pci/hda/patch_conexant.c >> > +++ b/sound/pci/hda/patch_conexant.c >> > @@ -3108,6 +3108,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = =3D { >> > =A0 =A0 =A0 =A0SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OL= PC_XO_1_5), >> > =A0 =A0 =A0 =A0SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_T= HINKPAD), >> > =A0 =A0 =A0 =A0SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066= _IDEAPAD), >> > + =A0 =A0 =A0 SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT506= 6_THINKPAD), >> > =A0 =A0 =A0 =A0SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", >> > CXT5066_IDEAPAD), >> > =A0 =A0 =A0 =A0SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_= IDEAPAD), >> > =A0 =A0 =A0 =A0SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT506= 6_THINKPAD), >> > -- >> > 1.7.0.4 >> > >> > --- >> > Manoj Iyer >> > >> >> >> >> -- >> --manjo >> > --=20 --manjo

1 0

[PATCH] Enable jack sense for Thinkpad Edge 11
by Manoj Iyer 18 Nov '10

18 Nov '10

Signed-off-by: Manoj Iyer <manoj.iyer(a)canonical.com> --- sound/pci/hda/patch_conexant.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 6361f75..b8d6554 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3108,6 +3108,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD), + SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD), -- 1.7.0.4 --- Manoj Iyer

1 0

[alsa-devel] [PATCH] ASoC: Provide ADC left/right channel source selection on WM8994
by Mark Brown 18 Nov '10

18 Nov '10

Allow the application to choose if the ADC data presented on the left and right channels is sourced from the internal left or right channel. This allows a mono recording to be presented as stereo on the external bus. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994.c | 27 ++++++++++++++++++++++----- 1 files changed, 22 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 3ca734d..3c4d178 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -503,21 +503,33 @@ static int wm8994_get_retune_mobile_enum(struct snd_kcontrol *kcontrol, return 0; } -static const char *aifdac_src_text[] = { +static const char *aif_chan_src_text[] = { "Left", "Right" }; +static const struct soc_enum aif1adcl_src = + SOC_ENUM_SINGLE(WM8994_AIF1_CONTROL_1, 15, 2, aif_chan_src_text); + +static const struct soc_enum aif1adcr_src = + SOC_ENUM_SINGLE(WM8994_AIF1_CONTROL_1, 14, 2, aif_chan_src_text); + +static const struct soc_enum aif2adcl_src = + SOC_ENUM_SINGLE(WM8994_AIF2_CONTROL_1, 15, 2, aif_chan_src_text); + +static const struct soc_enum aif2adcr_src = + SOC_ENUM_SINGLE(WM8994_AIF2_CONTROL_1, 14, 2, aif_chan_src_text); + static const struct soc_enum aif1dacl_src = - SOC_ENUM_SINGLE(WM8994_AIF1_CONTROL_2, 15, 2, aifdac_src_text); + SOC_ENUM_SINGLE(WM8994_AIF1_CONTROL_2, 15, 2, aif_chan_src_text); static const struct soc_enum aif1dacr_src = - SOC_ENUM_SINGLE(WM8994_AIF1_CONTROL_2, 14, 2, aifdac_src_text); + SOC_ENUM_SINGLE(WM8994_AIF1_CONTROL_2, 14, 2, aif_chan_src_text); static const struct soc_enum aif2dacl_src = - SOC_ENUM_SINGLE(WM8994_AIF2_CONTROL_2, 15, 2, aifdac_src_text); + SOC_ENUM_SINGLE(WM8994_AIF2_CONTROL_2, 15, 2, aif_chan_src_text); static const struct soc_enum aif2dacr_src = - SOC_ENUM_SINGLE(WM8994_AIF2_CONTROL_2, 14, 2, aifdac_src_text); + SOC_ENUM_SINGLE(WM8994_AIF2_CONTROL_2, 14, 2, aif_chan_src_text); static void wm8958_mbc_apply(struct snd_soc_codec *codec, int mbc, int start) { @@ -692,6 +704,11 @@ SOC_DOUBLE_R_TLV("AIF2ADC Volume", WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2_ADC_RIGHT_VOLUME, 1, 119, 0, digital_tlv), +SOC_ENUM("AIF1ADCL Source", aif1adcl_src), +SOC_ENUM("AIF1ADCR Source", aif1adcr_src), +SOC_ENUM("AIF2ADCL Source", aif1adcl_src), +SOC_ENUM("AIF2ADCR Source", aif1adcr_src), + SOC_ENUM("AIF1DACL Source", aif1dacl_src), SOC_ENUM("AIF1DACR Source", aif1dacr_src), SOC_ENUM("AIF2DACL Source", aif1dacl_src), -- 1.7.1

2 1

[alsa-devel] [PATCH] ASoC: Move WM8994 read/write access data into separate file
by Mark Brown 18 Nov '10

18 Nov '10

Makes the WM8994 driver file itself substantially smaller. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994-tables.c | 1575 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8994.c | 1582 +------------------------------------- sound/soc/codecs/wm8994.h | 9 + 3 files changed, 1587 insertions(+), 1579 deletions(-) create mode 100644 sound/soc/codecs/wm8994-tables.c diff --git a/sound/soc/codecs/wm8994-tables.c b/sound/soc/codecs/wm8994-tables.c new file mode 100644 index 0000000..7b93538 --- /dev/null +++ b/sound/soc/codecs/wm8994-tables.c @@ -0,0 +1,1575 @@ +#include "wm8994.h" + +const struct wm8994_access_mask wm8994_access_masks[WM8994_CACHE_SIZE] = { + { 0xFFFF, 0xFFFF }, /* R0 - Software Reset */ + { 0x3B37, 0x3B37 }, /* R1 - Power Management (1) */ + { 0x6BF0, 0x6BF0 }, /* R2 - Power Management (2) */ + { 0x3FF0, 0x3FF0 }, /* R3 - Power Management (3) */ + { 0x3F3F, 0x3F3F }, /* R4 - Power Management (4) */ + { 0x3F0F, 0x3F0F }, /* R5 - Power Management (5) */ + { 0x003F, 0x003F }, /* R6 - Power Management (6) */ + { 0x0000, 0x0000 }, /* R7 */ + { 0x0000, 0x0000 }, /* R8 */ + { 0x0000, 0x0000 }, /* R9 */ + { 0x0000, 0x0000 }, /* R10 */ + { 0x0000, 0x0000 }, /* R11 */ + { 0x0000, 0x0000 }, /* R12 */ + { 0x0000, 0x0000 }, /* R13 */ + { 0x0000, 0x0000 }, /* R14 */ + { 0x0000, 0x0000 }, /* R15 */ + { 0x0000, 0x0000 }, /* R16 */ + { 0x0000, 0x0000 }, /* R17 */ + { 0x0000, 0x0000 }, /* R18 */ + { 0x0000, 0x0000 }, /* R19 */ + { 0x0000, 0x0000 }, /* R20 */ + { 0x01C0, 0x01C0 }, /* R21 - Input Mixer (1) */ + { 0x0000, 0x0000 }, /* R22 */ + { 0x0000, 0x0000 }, /* R23 */ + { 0x00DF, 0x01DF }, /* R24 - Left Line Input 1&2 Volume */ + { 0x00DF, 0x01DF }, /* R25 - Left Line Input 3&4 Volume */ + { 0x00DF, 0x01DF }, /* R26 - Right Line Input 1&2 Volume */ + { 0x00DF, 0x01DF }, /* R27 - Right Line Input 3&4 Volume */ + { 0x00FF, 0x01FF }, /* R28 - Left Output Volume */ + { 0x00FF, 0x01FF }, /* R29 - Right Output Volume */ + { 0x0077, 0x0077 }, /* R30 - Line Outputs Volume */ + { 0x0030, 0x0030 }, /* R31 - HPOUT2 Volume */ + { 0x00FF, 0x01FF }, /* R32 - Left OPGA Volume */ + { 0x00FF, 0x01FF }, /* R33 - Right OPGA Volume */ + { 0x007F, 0x007F }, /* R34 - SPKMIXL Attenuation */ + { 0x017F, 0x017F }, /* R35 - SPKMIXR Attenuation */ + { 0x003F, 0x003F }, /* R36 - SPKOUT Mixers */ + { 0x003F, 0x003F }, /* R37 - ClassD */ + { 0x00FF, 0x01FF }, /* R38 - Speaker Volume Left */ + { 0x00FF, 0x01FF }, /* R39 - Speaker Volume Right */ + { 0x00FF, 0x00FF }, /* R40 - Input Mixer (2) */ + { 0x01B7, 0x01B7 }, /* R41 - Input Mixer (3) */ + { 0x01B7, 0x01B7 }, /* R42 - Input Mixer (4) */ + { 0x01C7, 0x01C7 }, /* R43 - Input Mixer (5) */ + { 0x01C7, 0x01C7 }, /* R44 - Input Mixer (6) */ + { 0x01FF, 0x01FF }, /* R45 - Output Mixer (1) */ + { 0x01FF, 0x01FF }, /* R46 - Output Mixer (2) */ + { 0x0FFF, 0x0FFF }, /* R47 - Output Mixer (3) */ + { 0x0FFF, 0x0FFF }, /* R48 - Output Mixer (4) */ + { 0x0FFF, 0x0FFF }, /* R49 - Output Mixer (5) */ + { 0x0FFF, 0x0FFF }, /* R50 - Output Mixer (6) */ + { 0x0038, 0x0038 }, /* R51 - HPOUT2 Mixer */ + { 0x0077, 0x0077 }, /* R52 - Line Mixer (1) */ + { 0x0077, 0x0077 }, /* R53 - Line Mixer (2) */ + { 0x03FF, 0x03FF }, /* R54 - Speaker Mixer */ + { 0x00C1, 0x00C1 }, /* R55 - Additional Control */ + { 0x00F0, 0x00F0 }, /* R56 - AntiPOP (1) */ + { 0x01EF, 0x01EF }, /* R57 - AntiPOP (2) */ + { 0x00FF, 0x00FF }, /* R58 - MICBIAS */ + { 0x000F, 0x000F }, /* R59 - LDO 1 */ + { 0x0007, 0x0007 }, /* R60 - LDO 2 */ + { 0x0000, 0x0000 }, /* R61 */ + { 0x0000, 0x0000 }, /* R62 */ + { 0x0000, 0x0000 }, /* R63 */ + { 0x0000, 0x0000 }, /* R64 */ + { 0x0000, 0x0000 }, /* R65 */ + { 0x0000, 0x0000 }, /* R66 */ + { 0x0000, 0x0000 }, /* R67 */ + { 0x0000, 0x0000 }, /* R68 */ + { 0x0000, 0x0000 }, /* R69 */ + { 0x0000, 0x0000 }, /* R70 */ + { 0x0000, 0x0000 }, /* R71 */ + { 0x0000, 0x0000 }, /* R72 */ + { 0x0000, 0x0000 }, /* R73 */ + { 0x0000, 0x0000 }, /* R74 */ + { 0x0000, 0x0000 }, /* R75 */ + { 0x8000, 0x8000 }, /* R76 - Charge Pump (1) */ + { 0x0000, 0x0000 }, /* R77 */ + { 0x0000, 0x0000 }, /* R78 */ + { 0x0000, 0x0000 }, /* R79 */ + { 0x0000, 0x0000 }, /* R80 */ + { 0x0301, 0x0301 }, /* R81 - Class W (1) */ + { 0x0000, 0x0000 }, /* R82 */ + { 0x0000, 0x0000 }, /* R83 */ + { 0x333F, 0x333F }, /* R84 - DC Servo (1) */ + { 0x0FEF, 0x0FEF }, /* R85 - DC Servo (2) */ + { 0x0000, 0x0000 }, /* R86 */ + { 0xFFFF, 0xFFFF }, /* R87 - DC Servo (4) */ + { 0x0333, 0x0000 }, /* R88 - DC Servo Readback */ + { 0x0000, 0x0000 }, /* R89 */ + { 0x0000, 0x0000 }, /* R90 */ + { 0x0000, 0x0000 }, /* R91 */ + { 0x0000, 0x0000 }, /* R92 */ + { 0x0000, 0x0000 }, /* R93 */ + { 0x0000, 0x0000 }, /* R94 */ + { 0x0000, 0x0000 }, /* R95 */ + { 0x00EE, 0x00EE }, /* R96 - Analogue HP (1) */ + { 0x0000, 0x0000 }, /* R97 */ + { 0x0000, 0x0000 }, /* R98 */ + { 0x0000, 0x0000 }, /* R99 */ + { 0x0000, 0x0000 }, /* R100 */ + { 0x0000, 0x0000 }, /* R101 */ + { 0x0000, 0x0000 }, /* R102 */ + { 0x0000, 0x0000 }, /* R103 */ + { 0x0000, 0x0000 }, /* R104 */ + { 0x0000, 0x0000 }, /* R105 */ + { 0x0000, 0x0000 }, /* R106 */ + { 0x0000, 0x0000 }, /* R107 */ + { 0x0000, 0x0000 }, /* R108 */ + { 0x0000, 0x0000 }, /* R109 */ + { 0x0000, 0x0000 }, /* R110 */ + { 0x0000, 0x0000 }, /* R111 */ + { 0x0000, 0x0000 }, /* R112 */ + { 0x0000, 0x0000 }, /* R113 */ + { 0x0000, 0x0000 }, /* R114 */ + { 0x0000, 0x0000 }, /* R115 */ + { 0x0000, 0x0000 }, /* R116 */ + { 0x0000, 0x0000 }, /* R117 */ + { 0x0000, 0x0000 }, /* R118 */ + { 0x0000, 0x0000 }, /* R119 */ + { 0x0000, 0x0000 }, /* R120 */ + { 0x0000, 0x0000 }, /* R121 */ + { 0x0000, 0x0000 }, /* R122 */ + { 0x0000, 0x0000 }, /* R123 */ + { 0x0000, 0x0000 }, /* R124 */ + { 0x0000, 0x0000 }, /* R125 */ + { 0x0000, 0x0000 }, /* R126 */ + { 0x0000, 0x0000 }, /* R127 */ + { 0x0000, 0x0000 }, /* R128 */ + { 0x0000, 0x0000 }, /* R129 */ + { 0x0000, 0x0000 }, /* R130 */ + { 0x0000, 0x0000 }, /* R131 */ + { 0x0000, 0x0000 }, /* R132 */ + { 0x0000, 0x0000 }, /* R133 */ + { 0x0000, 0x0000 }, /* R134 */ + { 0x0000, 0x0000 }, /* R135 */ + { 0x0000, 0x0000 }, /* R136 */ + { 0x0000, 0x0000 }, /* R137 */ + { 0x0000, 0x0000 }, /* R138 */ + { 0x0000, 0x0000 }, /* R139 */ + { 0x0000, 0x0000 }, /* R140 */ + { 0x0000, 0x0000 }, /* R141 */ + { 0x0000, 0x0000 }, /* R142 */ + { 0x0000, 0x0000 }, /* R143 */ + { 0x0000, 0x0000 }, /* R144 */ + { 0x0000, 0x0000 }, /* R145 */ + { 0x0000, 0x0000 }, /* R146 */ + { 0x0000, 0x0000 }, /* R147 */ + { 0x0000, 0x0000 }, /* R148 */ + { 0x0000, 0x0000 }, /* R149 */ + { 0x0000, 0x0000 }, /* R150 */ + { 0x0000, 0x0000 }, /* R151 */ + { 0x0000, 0x0000 }, /* R152 */ + { 0x0000, 0x0000 }, /* R153 */ + { 0x0000, 0x0000 }, /* R154 */ + { 0x0000, 0x0000 }, /* R155 */ + { 0x0000, 0x0000 }, /* R156 */ + { 0x0000, 0x0000 }, /* R157 */ + { 0x0000, 0x0000 }, /* R158 */ + { 0x0000, 0x0000 }, /* R159 */ + { 0x0000, 0x0000 }, /* R160 */ + { 0x0000, 0x0000 }, /* R161 */ + { 0x0000, 0x0000 }, /* R162 */ + { 0x0000, 0x0000 }, /* R163 */ + { 0x0000, 0x0000 }, /* R164 */ + { 0x0000, 0x0000 }, /* R165 */ + { 0x0000, 0x0000 }, /* R166 */ + { 0x0000, 0x0000 }, /* R167 */ + { 0x0000, 0x0000 }, /* R168 */ + { 0x0000, 0x0000 }, /* R169 */ + { 0x0000, 0x0000 }, /* R170 */ + { 0x0000, 0x0000 }, /* R171 */ + { 0x0000, 0x0000 }, /* R172 */ + { 0x0000, 0x0000 }, /* R173 */ + { 0x0000, 0x0000 }, /* R174 */ + { 0x0000, 0x0000 }, /* R175 */ + { 0x0000, 0x0000 }, /* R176 */ + { 0x0000, 0x0000 }, /* R177 */ + { 0x0000, 0x0000 }, /* R178 */ + { 0x0000, 0x0000 }, /* R179 */ + { 0x0000, 0x0000 }, /* R180 */ + { 0x0000, 0x0000 }, /* R181 */ + { 0x0000, 0x0000 }, /* R182 */ + { 0x0000, 0x0000 }, /* R183 */ + { 0x0000, 0x0000 }, /* R184 */ + { 0x0000, 0x0000 }, /* R185 */ + { 0x0000, 0x0000 }, /* R186 */ + { 0x0000, 0x0000 }, /* R187 */ + { 0x0000, 0x0000 }, /* R188 */ + { 0x0000, 0x0000 }, /* R189 */ + { 0x0000, 0x0000 }, /* R190 */ + { 0x0000, 0x0000 }, /* R191 */ + { 0x0000, 0x0000 }, /* R192 */ + { 0x0000, 0x0000 }, /* R193 */ + { 0x0000, 0x0000 }, /* R194 */ + { 0x0000, 0x0000 }, /* R195 */ + { 0x0000, 0x0000 }, /* R196 */ + { 0x0000, 0x0000 }, /* R197 */ + { 0x0000, 0x0000 }, /* R198 */ + { 0x0000, 0x0000 }, /* R199 */ + { 0x0000, 0x0000 }, /* R200 */ + { 0x0000, 0x0000 }, /* R201 */ + { 0x0000, 0x0000 }, /* R202 */ + { 0x0000, 0x0000 }, /* R203 */ + { 0x0000, 0x0000 }, /* R204 */ + { 0x0000, 0x0000 }, /* R205 */ + { 0x0000, 0x0000 }, /* R206 */ + { 0x0000, 0x0000 }, /* R207 */ + { 0x0000, 0x0000 }, /* R208 */ + { 0x0000, 0x0000 }, /* R209 */ + { 0x0000, 0x0000 }, /* R210 */ + { 0x0000, 0x0000 }, /* R211 */ + { 0x0000, 0x0000 }, /* R212 */ + { 0x0000, 0x0000 }, /* R213 */ + { 0x0000, 0x0000 }, /* R214 */ + { 0x0000, 0x0000 }, /* R215 */ + { 0x0000, 0x0000 }, /* R216 */ + { 0x0000, 0x0000 }, /* R217 */ + { 0x0000, 0x0000 }, /* R218 */ + { 0x0000, 0x0000 }, /* R219 */ + { 0x0000, 0x0000 }, /* R220 */ + { 0x0000, 0x0000 }, /* R221 */ + { 0x0000, 0x0000 }, /* R222 */ + { 0x0000, 0x0000 }, /* R223 */ + { 0x0000, 0x0000 }, /* R224 */ + { 0x0000, 0x0000 }, /* R225 */ + { 0x0000, 0x0000 }, /* R226 */ + { 0x0000, 0x0000 }, /* R227 */ + { 0x0000, 0x0000 }, /* R228 */ + { 0x0000, 0x0000 }, /* R229 */ + { 0x0000, 0x0000 }, /* R230 */ + { 0x0000, 0x0000 }, /* R231 */ + { 0x0000, 0x0000 }, /* R232 */ + { 0x0000, 0x0000 }, /* R233 */ + { 0x0000, 0x0000 }, /* R234 */ + { 0x0000, 0x0000 }, /* R235 */ + { 0x0000, 0x0000 }, /* R236 */ + { 0x0000, 0x0000 }, /* R237 */ + { 0x0000, 0x0000 }, /* R238 */ + { 0x0000, 0x0000 }, /* R239 */ + { 0x0000, 0x0000 }, /* R240 */ + { 0x0000, 0x0000 }, /* R241 */ + { 0x0000, 0x0000 }, /* R242 */ + { 0x0000, 0x0000 }, /* R243 */ + { 0x0000, 0x0000 }, /* R244 */ + { 0x0000, 0x0000 }, /* R245 */ + { 0x0000, 0x0000 }, /* R246 */ + { 0x0000, 0x0000 }, /* R247 */ + { 0x0000, 0x0000 }, /* R248 */ + { 0x0000, 0x0000 }, /* R249 */ + { 0x0000, 0x0000 }, /* R250 */ + { 0x0000, 0x0000 }, /* R251 */ + { 0x0000, 0x0000 }, /* R252 */ + { 0x0000, 0x0000 }, /* R253 */ + { 0x0000, 0x0000 }, /* R254 */ + { 0x0000, 0x0000 }, /* R255 */ + { 0x000F, 0x0000 }, /* R256 - Chip Revision */ + { 0x0074, 0x0074 }, /* R257 - Control Interface */ + { 0x0000, 0x0000 }, /* R258 */ + { 0x0000, 0x0000 }, /* R259 */ + { 0x0000, 0x0000 }, /* R260 */ + { 0x0000, 0x0000 }, /* R261 */ + { 0x0000, 0x0000 }, /* R262 */ + { 0x0000, 0x0000 }, /* R263 */ + { 0x0000, 0x0000 }, /* R264 */ + { 0x0000, 0x0000 }, /* R265 */ + { 0x0000, 0x0000 }, /* R266 */ + { 0x0000, 0x0000 }, /* R267 */ + { 0x0000, 0x0000 }, /* R268 */ + { 0x0000, 0x0000 }, /* R269 */ + { 0x0000, 0x0000 }, /* R270 */ + { 0x0000, 0x0000 }, /* R271 */ + { 0x807F, 0x837F }, /* R272 - Write Sequencer Ctrl (1) */ + { 0x017F, 0x0000 }, /* R273 - Write Sequencer Ctrl (2) */ + { 0x0000, 0x0000 }, /* R274 */ + { 0x0000, 0x0000 }, /* R275 */ + { 0x0000, 0x0000 }, /* R276 */ + { 0x0000, 0x0000 }, /* R277 */ + { 0x0000, 0x0000 }, /* R278 */ + { 0x0000, 0x0000 }, /* R279 */ + { 0x0000, 0x0000 }, /* R280 */ + { 0x0000, 0x0000 }, /* R281 */ + { 0x0000, 0x0000 }, /* R282 */ + { 0x0000, 0x0000 }, /* R283 */ + { 0x0000, 0x0000 }, /* R284 */ + { 0x0000, 0x0000 }, /* R285 */ + { 0x0000, 0x0000 }, /* R286 */ + { 0x0000, 0x0000 }, /* R287 */ + { 0x0000, 0x0000 }, /* R288 */ + { 0x0000, 0x0000 }, /* R289 */ + { 0x0000, 0x0000 }, /* R290 */ + { 0x0000, 0x0000 }, /* R291 */ + { 0x0000, 0x0000 }, /* R292 */ + { 0x0000, 0x0000 }, /* R293 */ + { 0x0000, 0x0000 }, /* R294 */ + { 0x0000, 0x0000 }, /* R295 */ + { 0x0000, 0x0000 }, /* R296 */ + { 0x0000, 0x0000 }, /* R297 */ + { 0x0000, 0x0000 }, /* R298 */ + { 0x0000, 0x0000 }, /* R299 */ + { 0x0000, 0x0000 }, /* R300 */ + { 0x0000, 0x0000 }, /* R301 */ + { 0x0000, 0x0000 }, /* R302 */ + { 0x0000, 0x0000 }, /* R303 */ + { 0x0000, 0x0000 }, /* R304 */ + { 0x0000, 0x0000 }, /* R305 */ + { 0x0000, 0x0000 }, /* R306 */ + { 0x0000, 0x0000 }, /* R307 */ + { 0x0000, 0x0000 }, /* R308 */ + { 0x0000, 0x0000 }, /* R309 */ + { 0x0000, 0x0000 }, /* R310 */ + { 0x0000, 0x0000 }, /* R311 */ + { 0x0000, 0x0000 }, /* R312 */ + { 0x0000, 0x0000 }, /* R313 */ + { 0x0000, 0x0000 }, /* R314 */ + { 0x0000, 0x0000 }, /* R315 */ + { 0x0000, 0x0000 }, /* R316 */ + { 0x0000, 0x0000 }, /* R317 */ + { 0x0000, 0x0000 }, /* R318 */ + { 0x0000, 0x0000 }, /* R319 */ + { 0x0000, 0x0000 }, /* R320 */ + { 0x0000, 0x0000 }, /* R321 */ + { 0x0000, 0x0000 }, /* R322 */ + { 0x0000, 0x0000 }, /* R323 */ + { 0x0000, 0x0000 }, /* R324 */ + { 0x0000, 0x0000 }, /* R325 */ + { 0x0000, 0x0000 }, /* R326 */ + { 0x0000, 0x0000 }, /* R327 */ + { 0x0000, 0x0000 }, /* R328 */ + { 0x0000, 0x0000 }, /* R329 */ + { 0x0000, 0x0000 }, /* R330 */ + { 0x0000, 0x0000 }, /* R331 */ + { 0x0000, 0x0000 }, /* R332 */ + { 0x0000, 0x0000 }, /* R333 */ + { 0x0000, 0x0000 }, /* R334 */ + { 0x0000, 0x0000 }, /* R335 */ + { 0x0000, 0x0000 }, /* R336 */ + { 0x0000, 0x0000 }, /* R337 */ + { 0x0000, 0x0000 }, /* R338 */ + { 0x0000, 0x0000 }, /* R339 */ + { 0x0000, 0x0000 }, /* R340 */ + { 0x0000, 0x0000 }, /* R341 */ + { 0x0000, 0x0000 }, /* R342 */ + { 0x0000, 0x0000 }, /* R343 */ + { 0x0000, 0x0000 }, /* R344 */ + { 0x0000, 0x0000 }, /* R345 */ + { 0x0000, 0x0000 }, /* R346 */ + { 0x0000, 0x0000 }, /* R347 */ + { 0x0000, 0x0000 }, /* R348 */ + { 0x0000, 0x0000 }, /* R349 */ + { 0x0000, 0x0000 }, /* R350 */ + { 0x0000, 0x0000 }, /* R351 */ + { 0x0000, 0x0000 }, /* R352 */ + { 0x0000, 0x0000 }, /* R353 */ + { 0x0000, 0x0000 }, /* R354 */ + { 0x0000, 0x0000 }, /* R355 */ + { 0x0000, 0x0000 }, /* R356 */ + { 0x0000, 0x0000 }, /* R357 */ + { 0x0000, 0x0000 }, /* R358 */ + { 0x0000, 0x0000 }, /* R359 */ + { 0x0000, 0x0000 }, /* R360 */ + { 0x0000, 0x0000 }, /* R361 */ + { 0x0000, 0x0000 }, /* R362 */ + { 0x0000, 0x0000 }, /* R363 */ + { 0x0000, 0x0000 }, /* R364 */ + { 0x0000, 0x0000 }, /* R365 */ + { 0x0000, 0x0000 }, /* R366 */ + { 0x0000, 0x0000 }, /* R367 */ + { 0x0000, 0x0000 }, /* R368 */ + { 0x0000, 0x0000 }, /* R369 */ + { 0x0000, 0x0000 }, /* R370 */ + { 0x0000, 0x0000 }, /* R371 */ + { 0x0000, 0x0000 }, /* R372 */ + { 0x0000, 0x0000 }, /* R373 */ + { 0x0000, 0x0000 }, /* R374 */ + { 0x0000, 0x0000 }, /* R375 */ + { 0x0000, 0x0000 }, /* R376 */ + { 0x0000, 0x0000 }, /* R377 */ + { 0x0000, 0x0000 }, /* R378 */ + { 0x0000, 0x0000 }, /* R379 */ + { 0x0000, 0x0000 }, /* R380 */ + { 0x0000, 0x0000 }, /* R381 */ + { 0x0000, 0x0000 }, /* R382 */ + { 0x0000, 0x0000 }, /* R383 */ + { 0x0000, 0x0000 }, /* R384 */ + { 0x0000, 0x0000 }, /* R385 */ + { 0x0000, 0x0000 }, /* R386 */ + { 0x0000, 0x0000 }, /* R387 */ + { 0x0000, 0x0000 }, /* R388 */ + { 0x0000, 0x0000 }, /* R389 */ + { 0x0000, 0x0000 }, /* R390 */ + { 0x0000, 0x0000 }, /* R391 */ + { 0x0000, 0x0000 }, /* R392 */ + { 0x0000, 0x0000 }, /* R393 */ + { 0x0000, 0x0000 }, /* R394 */ + { 0x0000, 0x0000 }, /* R395 */ + { 0x0000, 0x0000 }, /* R396 */ + { 0x0000, 0x0000 }, /* R397 */ + { 0x0000, 0x0000 }, /* R398 */ + { 0x0000, 0x0000 }, /* R399 */ + { 0x0000, 0x0000 }, /* R400 */ + { 0x0000, 0x0000 }, /* R401 */ + { 0x0000, 0x0000 }, /* R402 */ + { 0x0000, 0x0000 }, /* R403 */ + { 0x0000, 0x0000 }, /* R404 */ + { 0x0000, 0x0000 }, /* R405 */ + { 0x0000, 0x0000 }, /* R406 */ + { 0x0000, 0x0000 }, /* R407 */ + { 0x0000, 0x0000 }, /* R408 */ + { 0x0000, 0x0000 }, /* R409 */ + { 0x0000, 0x0000 }, /* R410 */ + { 0x0000, 0x0000 }, /* R411 */ + { 0x0000, 0x0000 }, /* R412 */ + { 0x0000, 0x0000 }, /* R413 */ + { 0x0000, 0x0000 }, /* R414 */ + { 0x0000, 0x0000 }, /* R415 */ + { 0x0000, 0x0000 }, /* R416 */ + { 0x0000, 0x0000 }, /* R417 */ + { 0x0000, 0x0000 }, /* R418 */ + { 0x0000, 0x0000 }, /* R419 */ + { 0x0000, 0x0000 }, /* R420 */ + { 0x0000, 0x0000 }, /* R421 */ + { 0x0000, 0x0000 }, /* R422 */ + { 0x0000, 0x0000 }, /* R423 */ + { 0x0000, 0x0000 }, /* R424 */ + { 0x0000, 0x0000 }, /* R425 */ + { 0x0000, 0x0000 }, /* R426 */ + { 0x0000, 0x0000 }, /* R427 */ + { 0x0000, 0x0000 }, /* R428 */ + { 0x0000, 0x0000 }, /* R429 */ + { 0x0000, 0x0000 }, /* R430 */ + { 0x0000, 0x0000 }, /* R431 */ + { 0x0000, 0x0000 }, /* R432 */ + { 0x0000, 0x0000 }, /* R433 */ + { 0x0000, 0x0000 }, /* R434 */ + { 0x0000, 0x0000 }, /* R435 */ + { 0x0000, 0x0000 }, /* R436 */ + { 0x0000, 0x0000 }, /* R437 */ + { 0x0000, 0x0000 }, /* R438 */ + { 0x0000, 0x0000 }, /* R439 */ + { 0x0000, 0x0000 }, /* R440 */ + { 0x0000, 0x0000 }, /* R441 */ + { 0x0000, 0x0000 }, /* R442 */ + { 0x0000, 0x0000 }, /* R443 */ + { 0x0000, 0x0000 }, /* R444 */ + { 0x0000, 0x0000 }, /* R445 */ + { 0x0000, 0x0000 }, /* R446 */ + { 0x0000, 0x0000 }, /* R447 */ + { 0x0000, 0x0000 }, /* R448 */ + { 0x0000, 0x0000 }, /* R449 */ + { 0x0000, 0x0000 }, /* R450 */ + { 0x0000, 0x0000 }, /* R451 */ + { 0x0000, 0x0000 }, /* R452 */ + { 0x0000, 0x0000 }, /* R453 */ + { 0x0000, 0x0000 }, /* R454 */ + { 0x0000, 0x0000 }, /* R455 */ + { 0x0000, 0x0000 }, /* R456 */ + { 0x0000, 0x0000 }, /* R457 */ + { 0x0000, 0x0000 }, /* R458 */ + { 0x0000, 0x0000 }, /* R459 */ + { 0x0000, 0x0000 }, /* R460 */ + { 0x0000, 0x0000 }, /* R461 */ + { 0x0000, 0x0000 }, /* R462 */ + { 0x0000, 0x0000 }, /* R463 */ + { 0x0000, 0x0000 }, /* R464 */ + { 0x0000, 0x0000 }, /* R465 */ + { 0x0000, 0x0000 }, /* R466 */ + { 0x0000, 0x0000 }, /* R467 */ + { 0x0000, 0x0000 }, /* R468 */ + { 0x0000, 0x0000 }, /* R469 */ + { 0x0000, 0x0000 }, /* R470 */ + { 0x0000, 0x0000 }, /* R471 */ + { 0x0000, 0x0000 }, /* R472 */ + { 0x0000, 0x0000 }, /* R473 */ + { 0x0000, 0x0000 }, /* R474 */ + { 0x0000, 0x0000 }, /* R475 */ + { 0x0000, 0x0000 }, /* R476 */ + { 0x0000, 0x0000 }, /* R477 */ + { 0x0000, 0x0000 }, /* R478 */ + { 0x0000, 0x0000 }, /* R479 */ + { 0x0000, 0x0000 }, /* R480 */ + { 0x0000, 0x0000 }, /* R481 */ + { 0x0000, 0x0000 }, /* R482 */ + { 0x0000, 0x0000 }, /* R483 */ + { 0x0000, 0x0000 }, /* R484 */ + { 0x0000, 0x0000 }, /* R485 */ + { 0x0000, 0x0000 }, /* R486 */ + { 0x0000, 0x0000 }, /* R487 */ + { 0x0000, 0x0000 }, /* R488 */ + { 0x0000, 0x0000 }, /* R489 */ + { 0x0000, 0x0000 }, /* R490 */ + { 0x0000, 0x0000 }, /* R491 */ + { 0x0000, 0x0000 }, /* R492 */ + { 0x0000, 0x0000 }, /* R493 */ + { 0x0000, 0x0000 }, /* R494 */ + { 0x0000, 0x0000 }, /* R495 */ + { 0x0000, 0x0000 }, /* R496 */ + { 0x0000, 0x0000 }, /* R497 */ + { 0x0000, 0x0000 }, /* R498 */ + { 0x0000, 0x0000 }, /* R499 */ + { 0x0000, 0x0000 }, /* R500 */ + { 0x0000, 0x0000 }, /* R501 */ + { 0x0000, 0x0000 }, /* R502 */ + { 0x0000, 0x0000 }, /* R503 */ + { 0x0000, 0x0000 }, /* R504 */ + { 0x0000, 0x0000 }, /* R505 */ + { 0x0000, 0x0000 }, /* R506 */ + { 0x0000, 0x0000 }, /* R507 */ + { 0x0000, 0x0000 }, /* R508 */ + { 0x0000, 0x0000 }, /* R509 */ + { 0x0000, 0x0000 }, /* R510 */ + { 0x0000, 0x0000 }, /* R511 */ + { 0x001F, 0x001F }, /* R512 - AIF1 Clocking (1) */ + { 0x003F, 0x003F }, /* R513 - AIF1 Clocking (2) */ + { 0x0000, 0x0000 }, /* R514 */ + { 0x0000, 0x0000 }, /* R515 */ + { 0x001F, 0x001F }, /* R516 - AIF2 Clocking (1) */ + { 0x003F, 0x003F }, /* R517 - AIF2 Clocking (2) */ + { 0x0000, 0x0000 }, /* R518 */ + { 0x0000, 0x0000 }, /* R519 */ + { 0x001F, 0x001F }, /* R520 - Clocking (1) */ + { 0x0777, 0x0777 }, /* R521 - Clocking (2) */ + { 0x0000, 0x0000 }, /* R522 */ + { 0x0000, 0x0000 }, /* R523 */ + { 0x0000, 0x0000 }, /* R524 */ + { 0x0000, 0x0000 }, /* R525 */ + { 0x0000, 0x0000 }, /* R526 */ + { 0x0000, 0x0000 }, /* R527 */ + { 0x00FF, 0x00FF }, /* R528 - AIF1 Rate */ + { 0x00FF, 0x00FF }, /* R529 - AIF2 Rate */ + { 0x000F, 0x0000 }, /* R530 - Rate Status */ + { 0x0000, 0x0000 }, /* R531 */ + { 0x0000, 0x0000 }, /* R532 */ + { 0x0000, 0x0000 }, /* R533 */ + { 0x0000, 0x0000 }, /* R534 */ + { 0x0000, 0x0000 }, /* R535 */ + { 0x0000, 0x0000 }, /* R536 */ + { 0x0000, 0x0000 }, /* R537 */ + { 0x0000, 0x0000 }, /* R538 */ + { 0x0000, 0x0000 }, /* R539 */ + { 0x0000, 0x0000 }, /* R540 */ + { 0x0000, 0x0000 }, /* R541 */ + { 0x0000, 0x0000 }, /* R542 */ + { 0x0000, 0x0000 }, /* R543 */ + { 0x0007, 0x0007 }, /* R544 - FLL1 Control (1) */ + { 0x3F77, 0x3F77 }, /* R545 - FLL1 Control (2) */ + { 0xFFFF, 0xFFFF }, /* R546 - FLL1 Control (3) */ + { 0x7FEF, 0x7FEF }, /* R547 - FLL1 Control (4) */ + { 0x1FDB, 0x1FDB }, /* R548 - FLL1 Control (5) */ + { 0x0000, 0x0000 }, /* R549 */ + { 0x0000, 0x0000 }, /* R550 */ + { 0x0000, 0x0000 }, /* R551 */ + { 0x0000, 0x0000 }, /* R552 */ + { 0x0000, 0x0000 }, /* R553 */ + { 0x0000, 0x0000 }, /* R554 */ + { 0x0000, 0x0000 }, /* R555 */ + { 0x0000, 0x0000 }, /* R556 */ + { 0x0000, 0x0000 }, /* R557 */ + { 0x0000, 0x0000 }, /* R558 */ + { 0x0000, 0x0000 }, /* R559 */ + { 0x0000, 0x0000 }, /* R560 */ + { 0x0000, 0x0000 }, /* R561 */ + { 0x0000, 0x0000 }, /* R562 */ + { 0x0000, 0x0000 }, /* R563 */ + { 0x0000, 0x0000 }, /* R564 */ + { 0x0000, 0x0000 }, /* R565 */ + { 0x0000, 0x0000 }, /* R566 */ + { 0x0000, 0x0000 }, /* R567 */ + { 0x0000, 0x0000 }, /* R568 */ + { 0x0000, 0x0000 }, /* R569 */ + { 0x0000, 0x0000 }, /* R570 */ + { 0x0000, 0x0000 }, /* R571 */ + { 0x0000, 0x0000 }, /* R572 */ + { 0x0000, 0x0000 }, /* R573 */ + { 0x0000, 0x0000 }, /* R574 */ + { 0x0000, 0x0000 }, /* R575 */ + { 0x0007, 0x0007 }, /* R576 - FLL2 Control (1) */ + { 0x3F77, 0x3F77 }, /* R577 - FLL2 Control (2) */ + { 0xFFFF, 0xFFFF }, /* R578 - FLL2 Control (3) */ + { 0x7FEF, 0x7FEF }, /* R579 - FLL2 Control (4) */ + { 0x1FDB, 0x1FDB }, /* R580 - FLL2 Control (5) */ + { 0x0000, 0x0000 }, /* R581 */ + { 0x0000, 0x0000 }, /* R582 */ + { 0x0000, 0x0000 }, /* R583 */ + { 0x0000, 0x0000 }, /* R584 */ + { 0x0000, 0x0000 }, /* R585 */ + { 0x0000, 0x0000 }, /* R586 */ + { 0x0000, 0x0000 }, /* R587 */ + { 0x0000, 0x0000 }, /* R588 */ + { 0x0000, 0x0000 }, /* R589 */ + { 0x0000, 0x0000 }, /* R590 */ + { 0x0000, 0x0000 }, /* R591 */ + { 0x0000, 0x0000 }, /* R592 */ + { 0x0000, 0x0000 }, /* R593 */ + { 0x0000, 0x0000 }, /* R594 */ + { 0x0000, 0x0000 }, /* R595 */ + { 0x0000, 0x0000 }, /* R596 */ + { 0x0000, 0x0000 }, /* R597 */ + { 0x0000, 0x0000 }, /* R598 */ + { 0x0000, 0x0000 }, /* R599 */ + { 0x0000, 0x0000 }, /* R600 */ + { 0x0000, 0x0000 }, /* R601 */ + { 0x0000, 0x0000 }, /* R602 */ + { 0x0000, 0x0000 }, /* R603 */ + { 0x0000, 0x0000 }, /* R604 */ + { 0x0000, 0x0000 }, /* R605 */ + { 0x0000, 0x0000 }, /* R606 */ + { 0x0000, 0x0000 }, /* R607 */ + { 0x0000, 0x0000 }, /* R608 */ + { 0x0000, 0x0000 }, /* R609 */ + { 0x0000, 0x0000 }, /* R610 */ + { 0x0000, 0x0000 }, /* R611 */ + { 0x0000, 0x0000 }, /* R612 */ + { 0x0000, 0x0000 }, /* R613 */ + { 0x0000, 0x0000 }, /* R614 */ + { 0x0000, 0x0000 }, /* R615 */ + { 0x0000, 0x0000 }, /* R616 */ + { 0x0000, 0x0000 }, /* R617 */ + { 0x0000, 0x0000 }, /* R618 */ + { 0x0000, 0x0000 }, /* R619 */ + { 0x0000, 0x0000 }, /* R620 */ + { 0x0000, 0x0000 }, /* R621 */ + { 0x0000, 0x0000 }, /* R622 */ + { 0x0000, 0x0000 }, /* R623 */ + { 0x0000, 0x0000 }, /* R624 */ + { 0x0000, 0x0000 }, /* R625 */ + { 0x0000, 0x0000 }, /* R626 */ + { 0x0000, 0x0000 }, /* R627 */ + { 0x0000, 0x0000 }, /* R628 */ + { 0x0000, 0x0000 }, /* R629 */ + { 0x0000, 0x0000 }, /* R630 */ + { 0x0000, 0x0000 }, /* R631 */ + { 0x0000, 0x0000 }, /* R632 */ + { 0x0000, 0x0000 }, /* R633 */ + { 0x0000, 0x0000 }, /* R634 */ + { 0x0000, 0x0000 }, /* R635 */ + { 0x0000, 0x0000 }, /* R636 */ + { 0x0000, 0x0000 }, /* R637 */ + { 0x0000, 0x0000 }, /* R638 */ + { 0x0000, 0x0000 }, /* R639 */ + { 0x0000, 0x0000 }, /* R640 */ + { 0x0000, 0x0000 }, /* R641 */ + { 0x0000, 0x0000 }, /* R642 */ + { 0x0000, 0x0000 }, /* R643 */ + { 0x0000, 0x0000 }, /* R644 */ + { 0x0000, 0x0000 }, /* R645 */ + { 0x0000, 0x0000 }, /* R646 */ + { 0x0000, 0x0000 }, /* R647 */ + { 0x0000, 0x0000 }, /* R648 */ + { 0x0000, 0x0000 }, /* R649 */ + { 0x0000, 0x0000 }, /* R650 */ + { 0x0000, 0x0000 }, /* R651 */ + { 0x0000, 0x0000 }, /* R652 */ + { 0x0000, 0x0000 }, /* R653 */ + { 0x0000, 0x0000 }, /* R654 */ + { 0x0000, 0x0000 }, /* R655 */ + { 0x0000, 0x0000 }, /* R656 */ + { 0x0000, 0x0000 }, /* R657 */ + { 0x0000, 0x0000 }, /* R658 */ + { 0x0000, 0x0000 }, /* R659 */ + { 0x0000, 0x0000 }, /* R660 */ + { 0x0000, 0x0000 }, /* R661 */ + { 0x0000, 0x0000 }, /* R662 */ + { 0x0000, 0x0000 }, /* R663 */ + { 0x0000, 0x0000 }, /* R664 */ + { 0x0000, 0x0000 }, /* R665 */ + { 0x0000, 0x0000 }, /* R666 */ + { 0x0000, 0x0000 }, /* R667 */ + { 0x0000, 0x0000 }, /* R668 */ + { 0x0000, 0x0000 }, /* R669 */ + { 0x0000, 0x0000 }, /* R670 */ + { 0x0000, 0x0000 }, /* R671 */ + { 0x0000, 0x0000 }, /* R672 */ + { 0x0000, 0x0000 }, /* R673 */ + { 0x0000, 0x0000 }, /* R674 */ + { 0x0000, 0x0000 }, /* R675 */ + { 0x0000, 0x0000 }, /* R676 */ + { 0x0000, 0x0000 }, /* R677 */ + { 0x0000, 0x0000 }, /* R678 */ + { 0x0000, 0x0000 }, /* R679 */ + { 0x0000, 0x0000 }, /* R680 */ + { 0x0000, 0x0000 }, /* R681 */ + { 0x0000, 0x0000 }, /* R682 */ + { 0x0000, 0x0000 }, /* R683 */ + { 0x0000, 0x0000 }, /* R684 */ + { 0x0000, 0x0000 }, /* R685 */ + { 0x0000, 0x0000 }, /* R686 */ + { 0x0000, 0x0000 }, /* R687 */ + { 0x0000, 0x0000 }, /* R688 */ + { 0x0000, 0x0000 }, /* R689 */ + { 0x0000, 0x0000 }, /* R690 */ + { 0x0000, 0x0000 }, /* R691 */ + { 0x0000, 0x0000 }, /* R692 */ + { 0x0000, 0x0000 }, /* R693 */ + { 0x0000, 0x0000 }, /* R694 */ + { 0x0000, 0x0000 }, /* R695 */ + { 0x0000, 0x0000 }, /* R696 */ + { 0x0000, 0x0000 }, /* R697 */ + { 0x0000, 0x0000 }, /* R698 */ + { 0x0000, 0x0000 }, /* R699 */ + { 0x0000, 0x0000 }, /* R700 */ + { 0x0000, 0x0000 }, /* R701 */ + { 0x0000, 0x0000 }, /* R702 */ + { 0x0000, 0x0000 }, /* R703 */ + { 0x0000, 0x0000 }, /* R704 */ + { 0x0000, 0x0000 }, /* R705 */ + { 0x0000, 0x0000 }, /* R706 */ + { 0x0000, 0x0000 }, /* R707 */ + { 0x0000, 0x0000 }, /* R708 */ + { 0x0000, 0x0000 }, /* R709 */ + { 0x0000, 0x0000 }, /* R710 */ + { 0x0000, 0x0000 }, /* R711 */ + { 0x0000, 0x0000 }, /* R712 */ + { 0x0000, 0x0000 }, /* R713 */ + { 0x0000, 0x0000 }, /* R714 */ + { 0x0000, 0x0000 }, /* R715 */ + { 0x0000, 0x0000 }, /* R716 */ + { 0x0000, 0x0000 }, /* R717 */ + { 0x0000, 0x0000 }, /* R718 */ + { 0x0000, 0x0000 }, /* R719 */ + { 0x0000, 0x0000 }, /* R720 */ + { 0x0000, 0x0000 }, /* R721 */ + { 0x0000, 0x0000 }, /* R722 */ + { 0x0000, 0x0000 }, /* R723 */ + { 0x0000, 0x0000 }, /* R724 */ + { 0x0000, 0x0000 }, /* R725 */ + { 0x0000, 0x0000 }, /* R726 */ + { 0x0000, 0x0000 }, /* R727 */ + { 0x0000, 0x0000 }, /* R728 */ + { 0x0000, 0x0000 }, /* R729 */ + { 0x0000, 0x0000 }, /* R730 */ + { 0x0000, 0x0000 }, /* R731 */ + { 0x0000, 0x0000 }, /* R732 */ + { 0x0000, 0x0000 }, /* R733 */ + { 0x0000, 0x0000 }, /* R734 */ + { 0x0000, 0x0000 }, /* R735 */ + { 0x0000, 0x0000 }, /* R736 */ + { 0x0000, 0x0000 }, /* R737 */ + { 0x0000, 0x0000 }, /* R738 */ + { 0x0000, 0x0000 }, /* R739 */ + { 0x0000, 0x0000 }, /* R740 */ + { 0x0000, 0x0000 }, /* R741 */ + { 0x0000, 0x0000 }, /* R742 */ + { 0x0000, 0x0000 }, /* R743 */ + { 0x0000, 0x0000 }, /* R744 */ + { 0x0000, 0x0000 }, /* R745 */ + { 0x0000, 0x0000 }, /* R746 */ + { 0x0000, 0x0000 }, /* R747 */ + { 0x0000, 0x0000 }, /* R748 */ + { 0x0000, 0x0000 }, /* R749 */ + { 0x0000, 0x0000 }, /* R750 */ + { 0x0000, 0x0000 }, /* R751 */ + { 0x0000, 0x0000 }, /* R752 */ + { 0x0000, 0x0000 }, /* R753 */ + { 0x0000, 0x0000 }, /* R754 */ + { 0x0000, 0x0000 }, /* R755 */ + { 0x0000, 0x0000 }, /* R756 */ + { 0x0000, 0x0000 }, /* R757 */ + { 0x0000, 0x0000 }, /* R758 */ + { 0x0000, 0x0000 }, /* R759 */ + { 0x0000, 0x0000 }, /* R760 */ + { 0x0000, 0x0000 }, /* R761 */ + { 0x0000, 0x0000 }, /* R762 */ + { 0x0000, 0x0000 }, /* R763 */ + { 0x0000, 0x0000 }, /* R764 */ + { 0x0000, 0x0000 }, /* R765 */ + { 0x0000, 0x0000 }, /* R766 */ + { 0x0000, 0x0000 }, /* R767 */ + { 0xE1F8, 0xE1F8 }, /* R768 - AIF1 Control (1) */ + { 0xCD1F, 0xCD1F }, /* R769 - AIF1 Control (2) */ + { 0xF000, 0xF000 }, /* R770 - AIF1 Master/Slave */ + { 0x01F0, 0x01F0 }, /* R771 - AIF1 BCLK */ + { 0x0FFF, 0x0FFF }, /* R772 - AIF1ADC LRCLK */ + { 0x0FFF, 0x0FFF }, /* R773 - AIF1DAC LRCLK */ + { 0x0003, 0x0003 }, /* R774 - AIF1DAC Data */ + { 0x0003, 0x0003 }, /* R775 - AIF1ADC Data */ + { 0x0000, 0x0000 }, /* R776 */ + { 0x0000, 0x0000 }, /* R777 */ + { 0x0000, 0x0000 }, /* R778 */ + { 0x0000, 0x0000 }, /* R779 */ + { 0x0000, 0x0000 }, /* R780 */ + { 0x0000, 0x0000 }, /* R781 */ + { 0x0000, 0x0000 }, /* R782 */ + { 0x0000, 0x0000 }, /* R783 */ + { 0xF1F8, 0xF1F8 }, /* R784 - AIF2 Control (1) */ + { 0xFD1F, 0xFD1F }, /* R785 - AIF2 Control (2) */ + { 0xF000, 0xF000 }, /* R786 - AIF2 Master/Slave */ + { 0x01F0, 0x01F0 }, /* R787 - AIF2 BCLK */ + { 0x0FFF, 0x0FFF }, /* R788 - AIF2ADC LRCLK */ + { 0x0FFF, 0x0FFF }, /* R789 - AIF2DAC LRCLK */ + { 0x0003, 0x0003 }, /* R790 - AIF2DAC Data */ + { 0x0003, 0x0003 }, /* R791 - AIF2ADC Data */ + { 0x0000, 0x0000 }, /* R792 */ + { 0x0000, 0x0000 }, /* R793 */ + { 0x0000, 0x0000 }, /* R794 */ + { 0x0000, 0x0000 }, /* R795 */ + { 0x0000, 0x0000 }, /* R796 */ + { 0x0000, 0x0000 }, /* R797 */ + { 0x0000, 0x0000 }, /* R798 */ + { 0x0000, 0x0000 }, /* R799 */ + { 0x0000, 0x0000 }, /* R800 */ + { 0x0000, 0x0000 }, /* R801 */ + { 0x0000, 0x0000 }, /* R802 */ + { 0x0000, 0x0000 }, /* R803 */ + { 0x0000, 0x0000 }, /* R804 */ + { 0x0000, 0x0000 }, /* R805 */ + { 0x0000, 0x0000 }, /* R806 */ + { 0x0000, 0x0000 }, /* R807 */ + { 0x0000, 0x0000 }, /* R808 */ + { 0x0000, 0x0000 }, /* R809 */ + { 0x0000, 0x0000 }, /* R810 */ + { 0x0000, 0x0000 }, /* R811 */ + { 0x0000, 0x0000 }, /* R812 */ + { 0x0000, 0x0000 }, /* R813 */ + { 0x0000, 0x0000 }, /* R814 */ + { 0x0000, 0x0000 }, /* R815 */ + { 0x0000, 0x0000 }, /* R816 */ + { 0x0000, 0x0000 }, /* R817 */ + { 0x0000, 0x0000 }, /* R818 */ + { 0x0000, 0x0000 }, /* R819 */ + { 0x0000, 0x0000 }, /* R820 */ + { 0x0000, 0x0000 }, /* R821 */ + { 0x0000, 0x0000 }, /* R822 */ + { 0x0000, 0x0000 }, /* R823 */ + { 0x0000, 0x0000 }, /* R824 */ + { 0x0000, 0x0000 }, /* R825 */ + { 0x0000, 0x0000 }, /* R826 */ + { 0x0000, 0x0000 }, /* R827 */ + { 0x0000, 0x0000 }, /* R828 */ + { 0x0000, 0x0000 }, /* R829 */ + { 0x0000, 0x0000 }, /* R830 */ + { 0x0000, 0x0000 }, /* R831 */ + { 0x0000, 0x0000 }, /* R832 */ + { 0x0000, 0x0000 }, /* R833 */ + { 0x0000, 0x0000 }, /* R834 */ + { 0x0000, 0x0000 }, /* R835 */ + { 0x0000, 0x0000 }, /* R836 */ + { 0x0000, 0x0000 }, /* R837 */ + { 0x0000, 0x0000 }, /* R838 */ + { 0x0000, 0x0000 }, /* R839 */ + { 0x0000, 0x0000 }, /* R840 */ + { 0x0000, 0x0000 }, /* R841 */ + { 0x0000, 0x0000 }, /* R842 */ + { 0x0000, 0x0000 }, /* R843 */ + { 0x0000, 0x0000 }, /* R844 */ + { 0x0000, 0x0000 }, /* R845 */ + { 0x0000, 0x0000 }, /* R846 */ + { 0x0000, 0x0000 }, /* R847 */ + { 0x0000, 0x0000 }, /* R848 */ + { 0x0000, 0x0000 }, /* R849 */ + { 0x0000, 0x0000 }, /* R850 */ + { 0x0000, 0x0000 }, /* R851 */ + { 0x0000, 0x0000 }, /* R852 */ + { 0x0000, 0x0000 }, /* R853 */ + { 0x0000, 0x0000 }, /* R854 */ + { 0x0000, 0x0000 }, /* R855 */ + { 0x0000, 0x0000 }, /* R856 */ + { 0x0000, 0x0000 }, /* R857 */ + { 0x0000, 0x0000 }, /* R858 */ + { 0x0000, 0x0000 }, /* R859 */ + { 0x0000, 0x0000 }, /* R860 */ + { 0x0000, 0x0000 }, /* R861 */ + { 0x0000, 0x0000 }, /* R862 */ + { 0x0000, 0x0000 }, /* R863 */ + { 0x0000, 0x0000 }, /* R864 */ + { 0x0000, 0x0000 }, /* R865 */ + { 0x0000, 0x0000 }, /* R866 */ + { 0x0000, 0x0000 }, /* R867 */ + { 0x0000, 0x0000 }, /* R868 */ + { 0x0000, 0x0000 }, /* R869 */ + { 0x0000, 0x0000 }, /* R870 */ + { 0x0000, 0x0000 }, /* R871 */ + { 0x0000, 0x0000 }, /* R872 */ + { 0x0000, 0x0000 }, /* R873 */ + { 0x0000, 0x0000 }, /* R874 */ + { 0x0000, 0x0000 }, /* R875 */ + { 0x0000, 0x0000 }, /* R876 */ + { 0x0000, 0x0000 }, /* R877 */ + { 0x0000, 0x0000 }, /* R878 */ + { 0x0000, 0x0000 }, /* R879 */ + { 0x0000, 0x0000 }, /* R880 */ + { 0x0000, 0x0000 }, /* R881 */ + { 0x0000, 0x0000 }, /* R882 */ + { 0x0000, 0x0000 }, /* R883 */ + { 0x0000, 0x0000 }, /* R884 */ + { 0x0000, 0x0000 }, /* R885 */ + { 0x0000, 0x0000 }, /* R886 */ + { 0x0000, 0x0000 }, /* R887 */ + { 0x0000, 0x0000 }, /* R888 */ + { 0x0000, 0x0000 }, /* R889 */ + { 0x0000, 0x0000 }, /* R890 */ + { 0x0000, 0x0000 }, /* R891 */ + { 0x0000, 0x0000 }, /* R892 */ + { 0x0000, 0x0000 }, /* R893 */ + { 0x0000, 0x0000 }, /* R894 */ + { 0x0000, 0x0000 }, /* R895 */ + { 0x0000, 0x0000 }, /* R896 */ + { 0x0000, 0x0000 }, /* R897 */ + { 0x0000, 0x0000 }, /* R898 */ + { 0x0000, 0x0000 }, /* R899 */ + { 0x0000, 0x0000 }, /* R900 */ + { 0x0000, 0x0000 }, /* R901 */ + { 0x0000, 0x0000 }, /* R902 */ + { 0x0000, 0x0000 }, /* R903 */ + { 0x0000, 0x0000 }, /* R904 */ + { 0x0000, 0x0000 }, /* R905 */ + { 0x0000, 0x0000 }, /* R906 */ + { 0x0000, 0x0000 }, /* R907 */ + { 0x0000, 0x0000 }, /* R908 */ + { 0x0000, 0x0000 }, /* R909 */ + { 0x0000, 0x0000 }, /* R910 */ + { 0x0000, 0x0000 }, /* R911 */ + { 0x0000, 0x0000 }, /* R912 */ + { 0x0000, 0x0000 }, /* R913 */ + { 0x0000, 0x0000 }, /* R914 */ + { 0x0000, 0x0000 }, /* R915 */ + { 0x0000, 0x0000 }, /* R916 */ + { 0x0000, 0x0000 }, /* R917 */ + { 0x0000, 0x0000 }, /* R918 */ + { 0x0000, 0x0000 }, /* R919 */ + { 0x0000, 0x0000 }, /* R920 */ + { 0x0000, 0x0000 }, /* R921 */ + { 0x0000, 0x0000 }, /* R922 */ + { 0x0000, 0x0000 }, /* R923 */ + { 0x0000, 0x0000 }, /* R924 */ + { 0x0000, 0x0000 }, /* R925 */ + { 0x0000, 0x0000 }, /* R926 */ + { 0x0000, 0x0000 }, /* R927 */ + { 0x0000, 0x0000 }, /* R928 */ + { 0x0000, 0x0000 }, /* R929 */ + { 0x0000, 0x0000 }, /* R930 */ + { 0x0000, 0x0000 }, /* R931 */ + { 0x0000, 0x0000 }, /* R932 */ + { 0x0000, 0x0000 }, /* R933 */ + { 0x0000, 0x0000 }, /* R934 */ + { 0x0000, 0x0000 }, /* R935 */ + { 0x0000, 0x0000 }, /* R936 */ + { 0x0000, 0x0000 }, /* R937 */ + { 0x0000, 0x0000 }, /* R938 */ + { 0x0000, 0x0000 }, /* R939 */ + { 0x0000, 0x0000 }, /* R940 */ + { 0x0000, 0x0000 }, /* R941 */ + { 0x0000, 0x0000 }, /* R942 */ + { 0x0000, 0x0000 }, /* R943 */ + { 0x0000, 0x0000 }, /* R944 */ + { 0x0000, 0x0000 }, /* R945 */ + { 0x0000, 0x0000 }, /* R946 */ + { 0x0000, 0x0000 }, /* R947 */ + { 0x0000, 0x0000 }, /* R948 */ + { 0x0000, 0x0000 }, /* R949 */ + { 0x0000, 0x0000 }, /* R950 */ + { 0x0000, 0x0000 }, /* R951 */ + { 0x0000, 0x0000 }, /* R952 */ + { 0x0000, 0x0000 }, /* R953 */ + { 0x0000, 0x0000 }, /* R954 */ + { 0x0000, 0x0000 }, /* R955 */ + { 0x0000, 0x0000 }, /* R956 */ + { 0x0000, 0x0000 }, /* R957 */ + { 0x0000, 0x0000 }, /* R958 */ + { 0x0000, 0x0000 }, /* R959 */ + { 0x0000, 0x0000 }, /* R960 */ + { 0x0000, 0x0000 }, /* R961 */ + { 0x0000, 0x0000 }, /* R962 */ + { 0x0000, 0x0000 }, /* R963 */ + { 0x0000, 0x0000 }, /* R964 */ + { 0x0000, 0x0000 }, /* R965 */ + { 0x0000, 0x0000 }, /* R966 */ + { 0x0000, 0x0000 }, /* R967 */ + { 0x0000, 0x0000 }, /* R968 */ + { 0x0000, 0x0000 }, /* R969 */ + { 0x0000, 0x0000 }, /* R970 */ + { 0x0000, 0x0000 }, /* R971 */ + { 0x0000, 0x0000 }, /* R972 */ + { 0x0000, 0x0000 }, /* R973 */ + { 0x0000, 0x0000 }, /* R974 */ + { 0x0000, 0x0000 }, /* R975 */ + { 0x0000, 0x0000 }, /* R976 */ + { 0x0000, 0x0000 }, /* R977 */ + { 0x0000, 0x0000 }, /* R978 */ + { 0x0000, 0x0000 }, /* R979 */ + { 0x0000, 0x0000 }, /* R980 */ + { 0x0000, 0x0000 }, /* R981 */ + { 0x0000, 0x0000 }, /* R982 */ + { 0x0000, 0x0000 }, /* R983 */ + { 0x0000, 0x0000 }, /* R984 */ + { 0x0000, 0x0000 }, /* R985 */ + { 0x0000, 0x0000 }, /* R986 */ + { 0x0000, 0x0000 }, /* R987 */ + { 0x0000, 0x0000 }, /* R988 */ + { 0x0000, 0x0000 }, /* R989 */ + { 0x0000, 0x0000 }, /* R990 */ + { 0x0000, 0x0000 }, /* R991 */ + { 0x0000, 0x0000 }, /* R992 */ + { 0x0000, 0x0000 }, /* R993 */ + { 0x0000, 0x0000 }, /* R994 */ + { 0x0000, 0x0000 }, /* R995 */ + { 0x0000, 0x0000 }, /* R996 */ + { 0x0000, 0x0000 }, /* R997 */ + { 0x0000, 0x0000 }, /* R998 */ + { 0x0000, 0x0000 }, /* R999 */ + { 0x0000, 0x0000 }, /* R1000 */ + { 0x0000, 0x0000 }, /* R1001 */ + { 0x0000, 0x0000 }, /* R1002 */ + { 0x0000, 0x0000 }, /* R1003 */ + { 0x0000, 0x0000 }, /* R1004 */ + { 0x0000, 0x0000 }, /* R1005 */ + { 0x0000, 0x0000 }, /* R1006 */ + { 0x0000, 0x0000 }, /* R1007 */ + { 0x0000, 0x0000 }, /* R1008 */ + { 0x0000, 0x0000 }, /* R1009 */ + { 0x0000, 0x0000 }, /* R1010 */ + { 0x0000, 0x0000 }, /* R1011 */ + { 0x0000, 0x0000 }, /* R1012 */ + { 0x0000, 0x0000 }, /* R1013 */ + { 0x0000, 0x0000 }, /* R1014 */ + { 0x0000, 0x0000 }, /* R1015 */ + { 0x0000, 0x0000 }, /* R1016 */ + { 0x0000, 0x0000 }, /* R1017 */ + { 0x0000, 0x0000 }, /* R1018 */ + { 0x0000, 0x0000 }, /* R1019 */ + { 0x0000, 0x0000 }, /* R1020 */ + { 0x0000, 0x0000 }, /* R1021 */ + { 0x0000, 0x0000 }, /* R1022 */ + { 0x0000, 0x0000 }, /* R1023 */ + { 0x00FF, 0x01FF }, /* R1024 - AIF1 ADC1 Left Volume */ + { 0x00FF, 0x01FF }, /* R1025 - AIF1 ADC1 Right Volume */ + { 0x00FF, 0x01FF }, /* R1026 - AIF1 DAC1 Left Volume */ + { 0x00FF, 0x01FF }, /* R1027 - AIF1 DAC1 Right Volume */ + { 0x00FF, 0x01FF }, /* R1028 - AIF1 ADC2 Left Volume */ + { 0x00FF, 0x01FF }, /* R1029 - AIF1 ADC2 Right Volume */ + { 0x00FF, 0x01FF }, /* R1030 - AIF1 DAC2 Left Volume */ + { 0x00FF, 0x01FF }, /* R1031 - AIF1 DAC2 Right Volume */ + { 0x0000, 0x0000 }, /* R1032 */ + { 0x0000, 0x0000 }, /* R1033 */ + { 0x0000, 0x0000 }, /* R1034 */ + { 0x0000, 0x0000 }, /* R1035 */ + { 0x0000, 0x0000 }, /* R1036 */ + { 0x0000, 0x0000 }, /* R1037 */ + { 0x0000, 0x0000 }, /* R1038 */ + { 0x0000, 0x0000 }, /* R1039 */ + { 0xF800, 0xF800 }, /* R1040 - AIF1 ADC1 Filters */ + { 0x7800, 0x7800 }, /* R1041 - AIF1 ADC2 Filters */ + { 0x0000, 0x0000 }, /* R1042 */ + { 0x0000, 0x0000 }, /* R1043 */ + { 0x0000, 0x0000 }, /* R1044 */ + { 0x0000, 0x0000 }, /* R1045 */ + { 0x0000, 0x0000 }, /* R1046 */ + { 0x0000, 0x0000 }, /* R1047 */ + { 0x0000, 0x0000 }, /* R1048 */ + { 0x0000, 0x0000 }, /* R1049 */ + { 0x0000, 0x0000 }, /* R1050 */ + { 0x0000, 0x0000 }, /* R1051 */ + { 0x0000, 0x0000 }, /* R1052 */ + { 0x0000, 0x0000 }, /* R1053 */ + { 0x0000, 0x0000 }, /* R1054 */ + { 0x0000, 0x0000 }, /* R1055 */ + { 0x02B6, 0x02B6 }, /* R1056 - AIF1 DAC1 Filters (1) */ + { 0x3F00, 0x3F00 }, /* R1057 - AIF1 DAC1 Filters (2) */ + { 0x02B6, 0x02B6 }, /* R1058 - AIF1 DAC2 Filters (1) */ + { 0x3F00, 0x3F00 }, /* R1059 - AIF1 DAC2 Filters (2) */ + { 0x0000, 0x0000 }, /* R1060 */ + { 0x0000, 0x0000 }, /* R1061 */ + { 0x0000, 0x0000 }, /* R1062 */ + { 0x0000, 0x0000 }, /* R1063 */ + { 0x0000, 0x0000 }, /* R1064 */ + { 0x0000, 0x0000 }, /* R1065 */ + { 0x0000, 0x0000 }, /* R1066 */ + { 0x0000, 0x0000 }, /* R1067 */ + { 0x0000, 0x0000 }, /* R1068 */ + { 0x0000, 0x0000 }, /* R1069 */ + { 0x0000, 0x0000 }, /* R1070 */ + { 0x0000, 0x0000 }, /* R1071 */ + { 0x0000, 0x0000 }, /* R1072 */ + { 0x0000, 0x0000 }, /* R1073 */ + { 0x0000, 0x0000 }, /* R1074 */ + { 0x0000, 0x0000 }, /* R1075 */ + { 0x0000, 0x0000 }, /* R1076 */ + { 0x0000, 0x0000 }, /* R1077 */ + { 0x0000, 0x0000 }, /* R1078 */ + { 0x0000, 0x0000 }, /* R1079 */ + { 0x0000, 0x0000 }, /* R1080 */ + { 0x0000, 0x0000 }, /* R1081 */ + { 0x0000, 0x0000 }, /* R1082 */ + { 0x0000, 0x0000 }, /* R1083 */ + { 0x0000, 0x0000 }, /* R1084 */ + { 0x0000, 0x0000 }, /* R1085 */ + { 0x0000, 0x0000 }, /* R1086 */ + { 0x0000, 0x0000 }, /* R1087 */ + { 0xFFFF, 0xFFFF }, /* R1088 - AIF1 DRC1 (1) */ + { 0x1FFF, 0x1FFF }, /* R1089 - AIF1 DRC1 (2) */ + { 0xFFFF, 0xFFFF }, /* R1090 - AIF1 DRC1 (3) */ + { 0x07FF, 0x07FF }, /* R1091 - AIF1 DRC1 (4) */ + { 0x03FF, 0x03FF }, /* R1092 - AIF1 DRC1 (5) */ + { 0x0000, 0x0000 }, /* R1093 */ + { 0x0000, 0x0000 }, /* R1094 */ + { 0x0000, 0x0000 }, /* R1095 */ + { 0x0000, 0x0000 }, /* R1096 */ + { 0x0000, 0x0000 }, /* R1097 */ + { 0x0000, 0x0000 }, /* R1098 */ + { 0x0000, 0x0000 }, /* R1099 */ + { 0x0000, 0x0000 }, /* R1100 */ + { 0x0000, 0x0000 }, /* R1101 */ + { 0x0000, 0x0000 }, /* R1102 */ + { 0x0000, 0x0000 }, /* R1103 */ + { 0xFFFF, 0xFFFF }, /* R1104 - AIF1 DRC2 (1) */ + { 0x1FFF, 0x1FFF }, /* R1105 - AIF1 DRC2 (2) */ + { 0xFFFF, 0xFFFF }, /* R1106 - AIF1 DRC2 (3) */ + { 0x07FF, 0x07FF }, /* R1107 - AIF1 DRC2 (4) */ + { 0x03FF, 0x03FF }, /* R1108 - AIF1 DRC2 (5) */ + { 0x0000, 0x0000 }, /* R1109 */ + { 0x0000, 0x0000 }, /* R1110 */ + { 0x0000, 0x0000 }, /* R1111 */ + { 0x0000, 0x0000 }, /* R1112 */ + { 0x0000, 0x0000 }, /* R1113 */ + { 0x0000, 0x0000 }, /* R1114 */ + { 0x0000, 0x0000 }, /* R1115 */ + { 0x0000, 0x0000 }, /* R1116 */ + { 0x0000, 0x0000 }, /* R1117 */ + { 0x0000, 0x0000 }, /* R1118 */ + { 0x0000, 0x0000 }, /* R1119 */ + { 0x0000, 0x0000 }, /* R1120 */ + { 0x0000, 0x0000 }, /* R1121 */ + { 0x0000, 0x0000 }, /* R1122 */ + { 0x0000, 0x0000 }, /* R1123 */ + { 0x0000, 0x0000 }, /* R1124 */ + { 0x0000, 0x0000 }, /* R1125 */ + { 0x0000, 0x0000 }, /* R1126 */ + { 0x0000, 0x0000 }, /* R1127 */ + { 0x0000, 0x0000 }, /* R1128 */ + { 0x0000, 0x0000 }, /* R1129 */ + { 0x0000, 0x0000 }, /* R1130 */ + { 0x0000, 0x0000 }, /* R1131 */ + { 0x0000, 0x0000 }, /* R1132 */ + { 0x0000, 0x0000 }, /* R1133 */ + { 0x0000, 0x0000 }, /* R1134 */ + { 0x0000, 0x0000 }, /* R1135 */ + { 0x0000, 0x0000 }, /* R1136 */ + { 0x0000, 0x0000 }, /* R1137 */ + { 0x0000, 0x0000 }, /* R1138 */ + { 0x0000, 0x0000 }, /* R1139 */ + { 0x0000, 0x0000 }, /* R1140 */ + { 0x0000, 0x0000 }, /* R1141 */ + { 0x0000, 0x0000 }, /* R1142 */ + { 0x0000, 0x0000 }, /* R1143 */ + { 0x0000, 0x0000 }, /* R1144 */ + { 0x0000, 0x0000 }, /* R1145 */ + { 0x0000, 0x0000 }, /* R1146 */ + { 0x0000, 0x0000 }, /* R1147 */ + { 0x0000, 0x0000 }, /* R1148 */ + { 0x0000, 0x0000 }, /* R1149 */ + { 0x0000, 0x0000 }, /* R1150 */ + { 0x0000, 0x0000 }, /* R1151 */ + { 0xFFFF, 0xFFFF }, /* R1152 - AIF1 DAC1 EQ Gains (1) */ + { 0xFFC0, 0xFFC0 }, /* R1153 - AIF1 DAC1 EQ Gains (2) */ + { 0xFFFF, 0xFFFF }, /* R1154 - AIF1 DAC1 EQ Band 1 A */ + { 0xFFFF, 0xFFFF }, /* R1155 - AIF1 DAC1 EQ Band 1 B */ + { 0xFFFF, 0xFFFF }, /* R1156 - AIF1 DAC1 EQ Band 1 PG */ + { 0xFFFF, 0xFFFF }, /* R1157 - AIF1 DAC1 EQ Band 2 A */ + { 0xFFFF, 0xFFFF }, /* R1158 - AIF1 DAC1 EQ Band 2 B */ + { 0xFFFF, 0xFFFF }, /* R1159 - AIF1 DAC1 EQ Band 2 C */ + { 0xFFFF, 0xFFFF }, /* R1160 - AIF1 DAC1 EQ Band 2 PG */ + { 0xFFFF, 0xFFFF }, /* R1161 - AIF1 DAC1 EQ Band 3 A */ + { 0xFFFF, 0xFFFF }, /* R1162 - AIF1 DAC1 EQ Band 3 B */ + { 0xFFFF, 0xFFFF }, /* R1163 - AIF1 DAC1 EQ Band 3 C */ + { 0xFFFF, 0xFFFF }, /* R1164 - AIF1 DAC1 EQ Band 3 PG */ + { 0xFFFF, 0xFFFF }, /* R1165 - AIF1 DAC1 EQ Band 4 A */ + { 0xFFFF, 0xFFFF }, /* R1166 - AIF1 DAC1 EQ Band 4 B */ + { 0xFFFF, 0xFFFF }, /* R1167 - AIF1 DAC1 EQ Band 4 C */ + { 0xFFFF, 0xFFFF }, /* R1168 - AIF1 DAC1 EQ Band 4 PG */ + { 0xFFFF, 0xFFFF }, /* R1169 - AIF1 DAC1 EQ Band 5 A */ + { 0xFFFF, 0xFFFF }, /* R1170 - AIF1 DAC1 EQ Band 5 B */ + { 0xFFFF, 0xFFFF }, /* R1171 - AIF1 DAC1 EQ Band 5 PG */ + { 0x0000, 0x0000 }, /* R1172 */ + { 0x0000, 0x0000 }, /* R1173 */ + { 0x0000, 0x0000 }, /* R1174 */ + { 0x0000, 0x0000 }, /* R1175 */ + { 0x0000, 0x0000 }, /* R1176 */ + { 0x0000, 0x0000 }, /* R1177 */ + { 0x0000, 0x0000 }, /* R1178 */ + { 0x0000, 0x0000 }, /* R1179 */ + { 0x0000, 0x0000 }, /* R1180 */ + { 0x0000, 0x0000 }, /* R1181 */ + { 0x0000, 0x0000 }, /* R1182 */ + { 0x0000, 0x0000 }, /* R1183 */ + { 0xFFFF, 0xFFFF }, /* R1184 - AIF1 DAC2 EQ Gains (1) */ + { 0xFFC0, 0xFFC0 }, /* R1185 - AIF1 DAC2 EQ Gains (2) */ + { 0xFFFF, 0xFFFF }, /* R1186 - AIF1 DAC2 EQ Band 1 A */ + { 0xFFFF, 0xFFFF }, /* R1187 - AIF1 DAC2 EQ Band 1 B */ + { 0xFFFF, 0xFFFF }, /* R1188 - AIF1 DAC2 EQ Band 1 PG */ + { 0xFFFF, 0xFFFF }, /* R1189 - AIF1 DAC2 EQ Band 2 A */ + { 0xFFFF, 0xFFFF }, /* R1190 - AIF1 DAC2 EQ Band 2 B */ + { 0xFFFF, 0xFFFF }, /* R1191 - AIF1 DAC2 EQ Band 2 C */ + { 0xFFFF, 0xFFFF }, /* R1192 - AIF1 DAC2 EQ Band 2 PG */ + { 0xFFFF, 0xFFFF }, /* R1193 - AIF1 DAC2 EQ Band 3 A */ + { 0xFFFF, 0xFFFF }, /* R1194 - AIF1 DAC2 EQ Band 3 B */ + { 0xFFFF, 0xFFFF }, /* R1195 - AIF1 DAC2 EQ Band 3 C */ + { 0xFFFF, 0xFFFF }, /* R1196 - AIF1 DAC2 EQ Band 3 PG */ + { 0xFFFF, 0xFFFF }, /* R1197 - AIF1 DAC2 EQ Band 4 A */ + { 0xFFFF, 0xFFFF }, /* R1198 - AIF1 DAC2 EQ Band 4 B */ + { 0xFFFF, 0xFFFF }, /* R1199 - AIF1 DAC2 EQ Band 4 C */ + { 0xFFFF, 0xFFFF }, /* R1200 - AIF1 DAC2 EQ Band 4 PG */ + { 0xFFFF, 0xFFFF }, /* R1201 - AIF1 DAC2 EQ Band 5 A */ + { 0xFFFF, 0xFFFF }, /* R1202 - AIF1 DAC2 EQ Band 5 B */ + { 0xFFFF, 0xFFFF }, /* R1203 - AIF1 DAC2 EQ Band 5 PG */ + { 0x0000, 0x0000 }, /* R1204 */ + { 0x0000, 0x0000 }, /* R1205 */ + { 0x0000, 0x0000 }, /* R1206 */ + { 0x0000, 0x0000 }, /* R1207 */ + { 0x0000, 0x0000 }, /* R1208 */ + { 0x0000, 0x0000 }, /* R1209 */ + { 0x0000, 0x0000 }, /* R1210 */ + { 0x0000, 0x0000 }, /* R1211 */ + { 0x0000, 0x0000 }, /* R1212 */ + { 0x0000, 0x0000 }, /* R1213 */ + { 0x0000, 0x0000 }, /* R1214 */ + { 0x0000, 0x0000 }, /* R1215 */ + { 0x0000, 0x0000 }, /* R1216 */ + { 0x0000, 0x0000 }, /* R1217 */ + { 0x0000, 0x0000 }, /* R1218 */ + { 0x0000, 0x0000 }, /* R1219 */ + { 0x0000, 0x0000 }, /* R1220 */ + { 0x0000, 0x0000 }, /* R1221 */ + { 0x0000, 0x0000 }, /* R1222 */ + { 0x0000, 0x0000 }, /* R1223 */ + { 0x0000, 0x0000 }, /* R1224 */ + { 0x0000, 0x0000 }, /* R1225 */ + { 0x0000, 0x0000 }, /* R1226 */ + { 0x0000, 0x0000 }, /* R1227 */ + { 0x0000, 0x0000 }, /* R1228 */ + { 0x0000, 0x0000 }, /* R1229 */ + { 0x0000, 0x0000 }, /* R1230 */ + { 0x0000, 0x0000 }, /* R1231 */ + { 0x0000, 0x0000 }, /* R1232 */ + { 0x0000, 0x0000 }, /* R1233 */ + { 0x0000, 0x0000 }, /* R1234 */ + { 0x0000, 0x0000 }, /* R1235 */ + { 0x0000, 0x0000 }, /* R1236 */ + { 0x0000, 0x0000 }, /* R1237 */ + { 0x0000, 0x0000 }, /* R1238 */ + { 0x0000, 0x0000 }, /* R1239 */ + { 0x0000, 0x0000 }, /* R1240 */ + { 0x0000, 0x0000 }, /* R1241 */ + { 0x0000, 0x0000 }, /* R1242 */ + { 0x0000, 0x0000 }, /* R1243 */ + { 0x0000, 0x0000 }, /* R1244 */ + { 0x0000, 0x0000 }, /* R1245 */ + { 0x0000, 0x0000 }, /* R1246 */ + { 0x0000, 0x0000 }, /* R1247 */ + { 0x0000, 0x0000 }, /* R1248 */ + { 0x0000, 0x0000 }, /* R1249 */ + { 0x0000, 0x0000 }, /* R1250 */ + { 0x0000, 0x0000 }, /* R1251 */ + { 0x0000, 0x0000 }, /* R1252 */ + { 0x0000, 0x0000 }, /* R1253 */ + { 0x0000, 0x0000 }, /* R1254 */ + { 0x0000, 0x0000 }, /* R1255 */ + { 0x0000, 0x0000 }, /* R1256 */ + { 0x0000, 0x0000 }, /* R1257 */ + { 0x0000, 0x0000 }, /* R1258 */ + { 0x0000, 0x0000 }, /* R1259 */ + { 0x0000, 0x0000 }, /* R1260 */ + { 0x0000, 0x0000 }, /* R1261 */ + { 0x0000, 0x0000 }, /* R1262 */ + { 0x0000, 0x0000 }, /* R1263 */ + { 0x0000, 0x0000 }, /* R1264 */ + { 0x0000, 0x0000 }, /* R1265 */ + { 0x0000, 0x0000 }, /* R1266 */ + { 0x0000, 0x0000 }, /* R1267 */ + { 0x0000, 0x0000 }, /* R1268 */ + { 0x0000, 0x0000 }, /* R1269 */ + { 0x0000, 0x0000 }, /* R1270 */ + { 0x0000, 0x0000 }, /* R1271 */ + { 0x0000, 0x0000 }, /* R1272 */ + { 0x0000, 0x0000 }, /* R1273 */ + { 0x0000, 0x0000 }, /* R1274 */ + { 0x0000, 0x0000 }, /* R1275 */ + { 0x0000, 0x0000 }, /* R1276 */ + { 0x0000, 0x0000 }, /* R1277 */ + { 0x0000, 0x0000 }, /* R1278 */ + { 0x0000, 0x0000 }, /* R1279 */ + { 0x00FF, 0x01FF }, /* R1280 - AIF2 ADC Left Volume */ + { 0x00FF, 0x01FF }, /* R1281 - AIF2 ADC Right Volume */ + { 0x00FF, 0x01FF }, /* R1282 - AIF2 DAC Left Volume */ + { 0x00FF, 0x01FF }, /* R1283 - AIF2 DAC Right Volume */ + { 0x0000, 0x0000 }, /* R1284 */ + { 0x0000, 0x0000 }, /* R1285 */ + { 0x0000, 0x0000 }, /* R1286 */ + { 0x0000, 0x0000 }, /* R1287 */ + { 0x0000, 0x0000 }, /* R1288 */ + { 0x0000, 0x0000 }, /* R1289 */ + { 0x0000, 0x0000 }, /* R1290 */ + { 0x0000, 0x0000 }, /* R1291 */ + { 0x0000, 0x0000 }, /* R1292 */ + { 0x0000, 0x0000 }, /* R1293 */ + { 0x0000, 0x0000 }, /* R1294 */ + { 0x0000, 0x0000 }, /* R1295 */ + { 0xF800, 0xF800 }, /* R1296 - AIF2 ADC Filters */ + { 0x0000, 0x0000 }, /* R1297 */ + { 0x0000, 0x0000 }, /* R1298 */ + { 0x0000, 0x0000 }, /* R1299 */ + { 0x0000, 0x0000 }, /* R1300 */ + { 0x0000, 0x0000 }, /* R1301 */ + { 0x0000, 0x0000 }, /* R1302 */ + { 0x0000, 0x0000 }, /* R1303 */ + { 0x0000, 0x0000 }, /* R1304 */ + { 0x0000, 0x0000 }, /* R1305 */ + { 0x0000, 0x0000 }, /* R1306 */ + { 0x0000, 0x0000 }, /* R1307 */ + { 0x0000, 0x0000 }, /* R1308 */ + { 0x0000, 0x0000 }, /* R1309 */ + { 0x0000, 0x0000 }, /* R1310 */ + { 0x0000, 0x0000 }, /* R1311 */ + { 0x02B6, 0x02B6 }, /* R1312 - AIF2 DAC Filters (1) */ + { 0x3F00, 0x3F00 }, /* R1313 - AIF2 DAC Filters (2) */ + { 0x0000, 0x0000 }, /* R1314 */ + { 0x0000, 0x0000 }, /* R1315 */ + { 0x0000, 0x0000 }, /* R1316 */ + { 0x0000, 0x0000 }, /* R1317 */ + { 0x0000, 0x0000 }, /* R1318 */ + { 0x0000, 0x0000 }, /* R1319 */ + { 0x0000, 0x0000 }, /* R1320 */ + { 0x0000, 0x0000 }, /* R1321 */ + { 0x0000, 0x0000 }, /* R1322 */ + { 0x0000, 0x0000 }, /* R1323 */ + { 0x0000, 0x0000 }, /* R1324 */ + { 0x0000, 0x0000 }, /* R1325 */ + { 0x0000, 0x0000 }, /* R1326 */ + { 0x0000, 0x0000 }, /* R1327 */ + { 0x0000, 0x0000 }, /* R1328 */ + { 0x0000, 0x0000 }, /* R1329 */ + { 0x0000, 0x0000 }, /* R1330 */ + { 0x0000, 0x0000 }, /* R1331 */ + { 0x0000, 0x0000 }, /* R1332 */ + { 0x0000, 0x0000 }, /* R1333 */ + { 0x0000, 0x0000 }, /* R1334 */ + { 0x0000, 0x0000 }, /* R1335 */ + { 0x0000, 0x0000 }, /* R1336 */ + { 0x0000, 0x0000 }, /* R1337 */ + { 0x0000, 0x0000 }, /* R1338 */ + { 0x0000, 0x0000 }, /* R1339 */ + { 0x0000, 0x0000 }, /* R1340 */ + { 0x0000, 0x0000 }, /* R1341 */ + { 0x0000, 0x0000 }, /* R1342 */ + { 0x0000, 0x0000 }, /* R1343 */ + { 0xFFFF, 0xFFFF }, /* R1344 - AIF2 DRC (1) */ + { 0x1FFF, 0x1FFF }, /* R1345 - AIF2 DRC (2) */ + { 0xFFFF, 0xFFFF }, /* R1346 - AIF2 DRC (3) */ + { 0x07FF, 0x07FF }, /* R1347 - AIF2 DRC (4) */ + { 0x03FF, 0x03FF }, /* R1348 - AIF2 DRC (5) */ + { 0x0000, 0x0000 }, /* R1349 */ + { 0x0000, 0x0000 }, /* R1350 */ + { 0x0000, 0x0000 }, /* R1351 */ + { 0x0000, 0x0000 }, /* R1352 */ + { 0x0000, 0x0000 }, /* R1353 */ + { 0x0000, 0x0000 }, /* R1354 */ + { 0x0000, 0x0000 }, /* R1355 */ + { 0x0000, 0x0000 }, /* R1356 */ + { 0x0000, 0x0000 }, /* R1357 */ + { 0x0000, 0x0000 }, /* R1358 */ + { 0x0000, 0x0000 }, /* R1359 */ + { 0x0000, 0x0000 }, /* R1360 */ + { 0x0000, 0x0000 }, /* R1361 */ + { 0x0000, 0x0000 }, /* R1362 */ + { 0x0000, 0x0000 }, /* R1363 */ + { 0x0000, 0x0000 }, /* R1364 */ + { 0x0000, 0x0000 }, /* R1365 */ + { 0x0000, 0x0000 }, /* R1366 */ + { 0x0000, 0x0000 }, /* R1367 */ + { 0x0000, 0x0000 }, /* R1368 */ + { 0x0000, 0x0000 }, /* R1369 */ + { 0x0000, 0x0000 }, /* R1370 */ + { 0x0000, 0x0000 }, /* R1371 */ + { 0x0000, 0x0000 }, /* R1372 */ + { 0x0000, 0x0000 }, /* R1373 */ + { 0x0000, 0x0000 }, /* R1374 */ + { 0x0000, 0x0000 }, /* R1375 */ + { 0x0000, 0x0000 }, /* R1376 */ + { 0x0000, 0x0000 }, /* R1377 */ + { 0x0000, 0x0000 }, /* R1378 */ + { 0x0000, 0x0000 }, /* R1379 */ + { 0x0000, 0x0000 }, /* R1380 */ + { 0x0000, 0x0000 }, /* R1381 */ + { 0x0000, 0x0000 }, /* R1382 */ + { 0x0000, 0x0000 }, /* R1383 */ + { 0x0000, 0x0000 }, /* R1384 */ + { 0x0000, 0x0000 }, /* R1385 */ + { 0x0000, 0x0000 }, /* R1386 */ + { 0x0000, 0x0000 }, /* R1387 */ + { 0x0000, 0x0000 }, /* R1388 */ + { 0x0000, 0x0000 }, /* R1389 */ + { 0x0000, 0x0000 }, /* R1390 */ + { 0x0000, 0x0000 }, /* R1391 */ + { 0x0000, 0x0000 }, /* R1392 */ + { 0x0000, 0x0000 }, /* R1393 */ + { 0x0000, 0x0000 }, /* R1394 */ + { 0x0000, 0x0000 }, /* R1395 */ + { 0x0000, 0x0000 }, /* R1396 */ + { 0x0000, 0x0000 }, /* R1397 */ + { 0x0000, 0x0000 }, /* R1398 */ + { 0x0000, 0x0000 }, /* R1399 */ + { 0x0000, 0x0000 }, /* R1400 */ + { 0x0000, 0x0000 }, /* R1401 */ + { 0x0000, 0x0000 }, /* R1402 */ + { 0x0000, 0x0000 }, /* R1403 */ + { 0x0000, 0x0000 }, /* R1404 */ + { 0x0000, 0x0000 }, /* R1405 */ + { 0x0000, 0x0000 }, /* R1406 */ + { 0x0000, 0x0000 }, /* R1407 */ + { 0xFFFF, 0xFFFF }, /* R1408 - AIF2 EQ Gains (1) */ + { 0xFFC0, 0xFFC0 }, /* R1409 - AIF2 EQ Gains (2) */ + { 0xFFFF, 0xFFFF }, /* R1410 - AIF2 EQ Band 1 A */ + { 0xFFFF, 0xFFFF }, /* R1411 - AIF2 EQ Band 1 B */ + { 0xFFFF, 0xFFFF }, /* R1412 - AIF2 EQ Band 1 PG */ + { 0xFFFF, 0xFFFF }, /* R1413 - AIF2 EQ Band 2 A */ + { 0xFFFF, 0xFFFF }, /* R1414 - AIF2 EQ Band 2 B */ + { 0xFFFF, 0xFFFF }, /* R1415 - AIF2 EQ Band 2 C */ + { 0xFFFF, 0xFFFF }, /* R1416 - AIF2 EQ Band 2 PG */ + { 0xFFFF, 0xFFFF }, /* R1417 - AIF2 EQ Band 3 A */ + { 0xFFFF, 0xFFFF }, /* R1418 - AIF2 EQ Band 3 B */ + { 0xFFFF, 0xFFFF }, /* R1419 - AIF2 EQ Band 3 C */ + { 0xFFFF, 0xFFFF }, /* R1420 - AIF2 EQ Band 3 PG */ + { 0xFFFF, 0xFFFF }, /* R1421 - AIF2 EQ Band 4 A */ + { 0xFFFF, 0xFFFF }, /* R1422 - AIF2 EQ Band 4 B */ + { 0xFFFF, 0xFFFF }, /* R1423 - AIF2 EQ Band 4 C */ + { 0xFFFF, 0xFFFF }, /* R1424 - AIF2 EQ Band 4 PG */ + { 0xFFFF, 0xFFFF }, /* R1425 - AIF2 EQ Band 5 A */ + { 0xFFFF, 0xFFFF }, /* R1426 - AIF2 EQ Band 5 B */ + { 0xFFFF, 0xFFFF }, /* R1427 - AIF2 EQ Band 5 PG */ + { 0x0000, 0x0000 }, /* R1428 */ + { 0x0000, 0x0000 }, /* R1429 */ + { 0x0000, 0x0000 }, /* R1430 */ + { 0x0000, 0x0000 }, /* R1431 */ + { 0x0000, 0x0000 }, /* R1432 */ + { 0x0000, 0x0000 }, /* R1433 */ + { 0x0000, 0x0000 }, /* R1434 */ + { 0x0000, 0x0000 }, /* R1435 */ + { 0x0000, 0x0000 }, /* R1436 */ + { 0x0000, 0x0000 }, /* R1437 */ + { 0x0000, 0x0000 }, /* R1438 */ + { 0x0000, 0x0000 }, /* R1439 */ + { 0x0000, 0x0000 }, /* R1440 */ + { 0x0000, 0x0000 }, /* R1441 */ + { 0x0000, 0x0000 }, /* R1442 */ + { 0x0000, 0x0000 }, /* R1443 */ + { 0x0000, 0x0000 }, /* R1444 */ + { 0x0000, 0x0000 }, /* R1445 */ + { 0x0000, 0x0000 }, /* R1446 */ + { 0x0000, 0x0000 }, /* R1447 */ + { 0x0000, 0x0000 }, /* R1448 */ + { 0x0000, 0x0000 }, /* R1449 */ + { 0x0000, 0x0000 }, /* R1450 */ + { 0x0000, 0x0000 }, /* R1451 */ + { 0x0000, 0x0000 }, /* R1452 */ + { 0x0000, 0x0000 }, /* R1453 */ + { 0x0000, 0x0000 }, /* R1454 */ + { 0x0000, 0x0000 }, /* R1455 */ + { 0x0000, 0x0000 }, /* R1456 */ + { 0x0000, 0x0000 }, /* R1457 */ + { 0x0000, 0x0000 }, /* R1458 */ + { 0x0000, 0x0000 }, /* R1459 */ + { 0x0000, 0x0000 }, /* R1460 */ + { 0x0000, 0x0000 }, /* R1461 */ + { 0x0000, 0x0000 }, /* R1462 */ + { 0x0000, 0x0000 }, /* R1463 */ + { 0x0000, 0x0000 }, /* R1464 */ + { 0x0000, 0x0000 }, /* R1465 */ + { 0x0000, 0x0000 }, /* R1466 */ + { 0x0000, 0x0000 }, /* R1467 */ + { 0x0000, 0x0000 }, /* R1468 */ + { 0x0000, 0x0000 }, /* R1469 */ + { 0x0000, 0x0000 }, /* R1470 */ + { 0x0000, 0x0000 }, /* R1471 */ + { 0x0000, 0x0000 }, /* R1472 */ + { 0x0000, 0x0000 }, /* R1473 */ + { 0x0000, 0x0000 }, /* R1474 */ + { 0x0000, 0x0000 }, /* R1475 */ + { 0x0000, 0x0000 }, /* R1476 */ + { 0x0000, 0x0000 }, /* R1477 */ + { 0x0000, 0x0000 }, /* R1478 */ + { 0x0000, 0x0000 }, /* R1479 */ + { 0x0000, 0x0000 }, /* R1480 */ + { 0x0000, 0x0000 }, /* R1481 */ + { 0x0000, 0x0000 }, /* R1482 */ + { 0x0000, 0x0000 }, /* R1483 */ + { 0x0000, 0x0000 }, /* R1484 */ + { 0x0000, 0x0000 }, /* R1485 */ + { 0x0000, 0x0000 }, /* R1486 */ + { 0x0000, 0x0000 }, /* R1487 */ + { 0x0000, 0x0000 }, /* R1488 */ + { 0x0000, 0x0000 }, /* R1489 */ + { 0x0000, 0x0000 }, /* R1490 */ + { 0x0000, 0x0000 }, /* R1491 */ + { 0x0000, 0x0000 }, /* R1492 */ + { 0x0000, 0x0000 }, /* R1493 */ + { 0x0000, 0x0000 }, /* R1494 */ + { 0x0000, 0x0000 }, /* R1495 */ + { 0x0000, 0x0000 }, /* R1496 */ + { 0x0000, 0x0000 }, /* R1497 */ + { 0x0000, 0x0000 }, /* R1498 */ + { 0x0000, 0x0000 }, /* R1499 */ + { 0x0000, 0x0000 }, /* R1500 */ + { 0x0000, 0x0000 }, /* R1501 */ + { 0x0000, 0x0000 }, /* R1502 */ + { 0x0000, 0x0000 }, /* R1503 */ + { 0x0000, 0x0000 }, /* R1504 */ + { 0x0000, 0x0000 }, /* R1505 */ + { 0x0000, 0x0000 }, /* R1506 */ + { 0x0000, 0x0000 }, /* R1507 */ + { 0x0000, 0x0000 }, /* R1508 */ + { 0x0000, 0x0000 }, /* R1509 */ + { 0x0000, 0x0000 }, /* R1510 */ + { 0x0000, 0x0000 }, /* R1511 */ + { 0x0000, 0x0000 }, /* R1512 */ + { 0x0000, 0x0000 }, /* R1513 */ + { 0x0000, 0x0000 }, /* R1514 */ + { 0x0000, 0x0000 }, /* R1515 */ + { 0x0000, 0x0000 }, /* R1516 */ + { 0x0000, 0x0000 }, /* R1517 */ + { 0x0000, 0x0000 }, /* R1518 */ + { 0x0000, 0x0000 }, /* R1519 */ + { 0x0000, 0x0000 }, /* R1520 */ + { 0x0000, 0x0000 }, /* R1521 */ + { 0x0000, 0x0000 }, /* R1522 */ + { 0x0000, 0x0000 }, /* R1523 */ + { 0x0000, 0x0000 }, /* R1524 */ + { 0x0000, 0x0000 }, /* R1525 */ + { 0x0000, 0x0000 }, /* R1526 */ + { 0x0000, 0x0000 }, /* R1527 */ + { 0x0000, 0x0000 }, /* R1528 */ + { 0x0000, 0x0000 }, /* R1529 */ + { 0x0000, 0x0000 }, /* R1530 */ + { 0x0000, 0x0000 }, /* R1531 */ + { 0x0000, 0x0000 }, /* R1532 */ + { 0x0000, 0x0000 }, /* R1533 */ + { 0x0000, 0x0000 }, /* R1534 */ + { 0x0000, 0x0000 }, /* R1535 */ + { 0x01EF, 0x01EF }, /* R1536 - DAC1 Mixer Volumes */ + { 0x0037, 0x0037 }, /* R1537 - DAC1 Left Mixer Routing */ + { 0x0037, 0x0037 }, /* R1538 - DAC1 Right Mixer Routing */ + { 0x01EF, 0x01EF }, /* R1539 - DAC2 Mixer Volumes */ + { 0x0037, 0x0037 }, /* R1540 - DAC2 Left Mixer Routing */ + { 0x0037, 0x0037 }, /* R1541 - DAC2 Right Mixer Routing */ + { 0x0003, 0x0003 }, /* R1542 - AIF1 ADC1 Left Mixer Routing */ + { 0x0003, 0x0003 }, /* R1543 - AIF1 ADC1 Right Mixer Routing */ + { 0x0003, 0x0003 }, /* R1544 - AIF1 ADC2 Left Mixer Routing */ + { 0x0003, 0x0003 }, /* R1545 - AIF1 ADC2 Right mixer Routing */ + { 0x0000, 0x0000 }, /* R1546 */ + { 0x0000, 0x0000 }, /* R1547 */ + { 0x0000, 0x0000 }, /* R1548 */ + { 0x0000, 0x0000 }, /* R1549 */ + { 0x0000, 0x0000 }, /* R1550 */ + { 0x0000, 0x0000 }, /* R1551 */ + { 0x02FF, 0x03FF }, /* R1552 - DAC1 Left Volume */ + { 0x02FF, 0x03FF }, /* R1553 - DAC1 Right Volume */ + { 0x02FF, 0x03FF }, /* R1554 - DAC2 Left Volume */ + { 0x02FF, 0x03FF }, /* R1555 - DAC2 Right Volume */ + { 0x0003, 0x0003 }, /* R1556 - DAC Softmute */ + { 0x0000, 0x0000 }, /* R1557 */ + { 0x0000, 0x0000 }, /* R1558 */ + { 0x0000, 0x0000 }, /* R1559 */ + { 0x0000, 0x0000 }, /* R1560 */ + { 0x0000, 0x0000 }, /* R1561 */ + { 0x0000, 0x0000 }, /* R1562 */ + { 0x0000, 0x0000 }, /* R1563 */ + { 0x0000, 0x0000 }, /* R1564 */ + { 0x0000, 0x0000 }, /* R1565 */ + { 0x0000, 0x0000 }, /* R1566 */ + { 0x0000, 0x0000 }, /* R1567 */ + { 0x0003, 0x0003 }, /* R1568 - Oversampling */ + { 0x03C3, 0x03C3 }, /* R1569 - Sidetone */ +}; + diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index f598ca0..3ca734d 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -106,1582 +106,6 @@ struct wm8994_priv { struct wm8994_pdata *pdata; }; -static const struct { - unsigned short readable; /* Mask of readable bits */ - unsigned short writable; /* Mask of writable bits */ -} access_masks[] = { - { 0xFFFF, 0xFFFF }, /* R0 - Software Reset */ - { 0x3B37, 0x3B37 }, /* R1 - Power Management (1) */ - { 0x6BF0, 0x6BF0 }, /* R2 - Power Management (2) */ - { 0x3FF0, 0x3FF0 }, /* R3 - Power Management (3) */ - { 0x3F3F, 0x3F3F }, /* R4 - Power Management (4) */ - { 0x3F0F, 0x3F0F }, /* R5 - Power Management (5) */ - { 0x003F, 0x003F }, /* R6 - Power Management (6) */ - { 0x0000, 0x0000 }, /* R7 */ - { 0x0000, 0x0000 }, /* R8 */ - { 0x0000, 0x0000 }, /* R9 */ - { 0x0000, 0x0000 }, /* R10 */ - { 0x0000, 0x0000 }, /* R11 */ - { 0x0000, 0x0000 }, /* R12 */ - { 0x0000, 0x0000 }, /* R13 */ - { 0x0000, 0x0000 }, /* R14 */ - { 0x0000, 0x0000 }, /* R15 */ - { 0x0000, 0x0000 }, /* R16 */ - { 0x0000, 0x0000 }, /* R17 */ - { 0x0000, 0x0000 }, /* R18 */ - { 0x0000, 0x0000 }, /* R19 */ - { 0x0000, 0x0000 }, /* R20 */ - { 0x01C0, 0x01C0 }, /* R21 - Input Mixer (1) */ - { 0x0000, 0x0000 }, /* R22 */ - { 0x0000, 0x0000 }, /* R23 */ - { 0x00DF, 0x01DF }, /* R24 - Left Line Input 1&2 Volume */ - { 0x00DF, 0x01DF }, /* R25 - Left Line Input 3&4 Volume */ - { 0x00DF, 0x01DF }, /* R26 - Right Line Input 1&2 Volume */ - { 0x00DF, 0x01DF }, /* R27 - Right Line Input 3&4 Volume */ - { 0x00FF, 0x01FF }, /* R28 - Left Output Volume */ - { 0x00FF, 0x01FF }, /* R29 - Right Output Volume */ - { 0x0077, 0x0077 }, /* R30 - Line Outputs Volume */ - { 0x0030, 0x0030 }, /* R31 - HPOUT2 Volume */ - { 0x00FF, 0x01FF }, /* R32 - Left OPGA Volume */ - { 0x00FF, 0x01FF }, /* R33 - Right OPGA Volume */ - { 0x007F, 0x007F }, /* R34 - SPKMIXL Attenuation */ - { 0x017F, 0x017F }, /* R35 - SPKMIXR Attenuation */ - { 0x003F, 0x003F }, /* R36 - SPKOUT Mixers */ - { 0x003F, 0x003F }, /* R37 - ClassD */ - { 0x00FF, 0x01FF }, /* R38 - Speaker Volume Left */ - { 0x00FF, 0x01FF }, /* R39 - Speaker Volume Right */ - { 0x00FF, 0x00FF }, /* R40 - Input Mixer (2) */ - { 0x01B7, 0x01B7 }, /* R41 - Input Mixer (3) */ - { 0x01B7, 0x01B7 }, /* R42 - Input Mixer (4) */ - { 0x01C7, 0x01C7 }, /* R43 - Input Mixer (5) */ - { 0x01C7, 0x01C7 }, /* R44 - Input Mixer (6) */ - { 0x01FF, 0x01FF }, /* R45 - Output Mixer (1) */ - { 0x01FF, 0x01FF }, /* R46 - Output Mixer (2) */ - { 0x0FFF, 0x0FFF }, /* R47 - Output Mixer (3) */ - { 0x0FFF, 0x0FFF }, /* R48 - Output Mixer (4) */ - { 0x0FFF, 0x0FFF }, /* R49 - Output Mixer (5) */ - { 0x0FFF, 0x0FFF }, /* R50 - Output Mixer (6) */ - { 0x0038, 0x0038 }, /* R51 - HPOUT2 Mixer */ - { 0x0077, 0x0077 }, /* R52 - Line Mixer (1) */ - { 0x0077, 0x0077 }, /* R53 - Line Mixer (2) */ - { 0x03FF, 0x03FF }, /* R54 - Speaker Mixer */ - { 0x00C1, 0x00C1 }, /* R55 - Additional Control */ - { 0x00F0, 0x00F0 }, /* R56 - AntiPOP (1) */ - { 0x01EF, 0x01EF }, /* R57 - AntiPOP (2) */ - { 0x00FF, 0x00FF }, /* R58 - MICBIAS */ - { 0x000F, 0x000F }, /* R59 - LDO 1 */ - { 0x0007, 0x0007 }, /* R60 - LDO 2 */ - { 0x0000, 0x0000 }, /* R61 */ - { 0x0000, 0x0000 }, /* R62 */ - { 0x0000, 0x0000 }, /* R63 */ - { 0x0000, 0x0000 }, /* R64 */ - { 0x0000, 0x0000 }, /* R65 */ - { 0x0000, 0x0000 }, /* R66 */ - { 0x0000, 0x0000 }, /* R67 */ - { 0x0000, 0x0000 }, /* R68 */ - { 0x0000, 0x0000 }, /* R69 */ - { 0x0000, 0x0000 }, /* R70 */ - { 0x0000, 0x0000 }, /* R71 */ - { 0x0000, 0x0000 }, /* R72 */ - { 0x0000, 0x0000 }, /* R73 */ - { 0x0000, 0x0000 }, /* R74 */ - { 0x0000, 0x0000 }, /* R75 */ - { 0x8000, 0x8000 }, /* R76 - Charge Pump (1) */ - { 0x0000, 0x0000 }, /* R77 */ - { 0x0000, 0x0000 }, /* R78 */ - { 0x0000, 0x0000 }, /* R79 */ - { 0x0000, 0x0000 }, /* R80 */ - { 0x0301, 0x0301 }, /* R81 - Class W (1) */ - { 0x0000, 0x0000 }, /* R82 */ - { 0x0000, 0x0000 }, /* R83 */ - { 0x333F, 0x333F }, /* R84 - DC Servo (1) */ - { 0x0FEF, 0x0FEF }, /* R85 - DC Servo (2) */ - { 0x0000, 0x0000 }, /* R86 */ - { 0xFFFF, 0xFFFF }, /* R87 - DC Servo (4) */ - { 0x0333, 0x0000 }, /* R88 - DC Servo Readback */ - { 0x0000, 0x0000 }, /* R89 */ - { 0x0000, 0x0000 }, /* R90 */ - { 0x0000, 0x0000 }, /* R91 */ - { 0x0000, 0x0000 }, /* R92 */ - { 0x0000, 0x0000 }, /* R93 */ - { 0x0000, 0x0000 }, /* R94 */ - { 0x0000, 0x0000 }, /* R95 */ - { 0x00EE, 0x00EE }, /* R96 - Analogue HP (1) */ - { 0x0000, 0x0000 }, /* R97 */ - { 0x0000, 0x0000 }, /* R98 */ - { 0x0000, 0x0000 }, /* R99 */ - { 0x0000, 0x0000 }, /* R100 */ - { 0x0000, 0x0000 }, /* R101 */ - { 0x0000, 0x0000 }, /* R102 */ - { 0x0000, 0x0000 }, /* R103 */ - { 0x0000, 0x0000 }, /* R104 */ - { 0x0000, 0x0000 }, /* R105 */ - { 0x0000, 0x0000 }, /* R106 */ - { 0x0000, 0x0000 }, /* R107 */ - { 0x0000, 0x0000 }, /* R108 */ - { 0x0000, 0x0000 }, /* R109 */ - { 0x0000, 0x0000 }, /* R110 */ - { 0x0000, 0x0000 }, /* R111 */ - { 0x0000, 0x0000 }, /* R112 */ - { 0x0000, 0x0000 }, /* R113 */ - { 0x0000, 0x0000 }, /* R114 */ - { 0x0000, 0x0000 }, /* R115 */ - { 0x0000, 0x0000 }, /* R116 */ - { 0x0000, 0x0000 }, /* R117 */ - { 0x0000, 0x0000 }, /* R118 */ - { 0x0000, 0x0000 }, /* R119 */ - { 0x0000, 0x0000 }, /* R120 */ - { 0x0000, 0x0000 }, /* R121 */ - { 0x0000, 0x0000 }, /* R122 */ - { 0x0000, 0x0000 }, /* R123 */ - { 0x0000, 0x0000 }, /* R124 */ - { 0x0000, 0x0000 }, /* R125 */ - { 0x0000, 0x0000 }, /* R126 */ - { 0x0000, 0x0000 }, /* R127 */ - { 0x0000, 0x0000 }, /* R128 */ - { 0x0000, 0x0000 }, /* R129 */ - { 0x0000, 0x0000 }, /* R130 */ - { 0x0000, 0x0000 }, /* R131 */ - { 0x0000, 0x0000 }, /* R132 */ - { 0x0000, 0x0000 }, /* R133 */ - { 0x0000, 0x0000 }, /* R134 */ - { 0x0000, 0x0000 }, /* R135 */ - { 0x0000, 0x0000 }, /* R136 */ - { 0x0000, 0x0000 }, /* R137 */ - { 0x0000, 0x0000 }, /* R138 */ - { 0x0000, 0x0000 }, /* R139 */ - { 0x0000, 0x0000 }, /* R140 */ - { 0x0000, 0x0000 }, /* R141 */ - { 0x0000, 0x0000 }, /* R142 */ - { 0x0000, 0x0000 }, /* R143 */ - { 0x0000, 0x0000 }, /* R144 */ - { 0x0000, 0x0000 }, /* R145 */ - { 0x0000, 0x0000 }, /* R146 */ - { 0x0000, 0x0000 }, /* R147 */ - { 0x0000, 0x0000 }, /* R148 */ - { 0x0000, 0x0000 }, /* R149 */ - { 0x0000, 0x0000 }, /* R150 */ - { 0x0000, 0x0000 }, /* R151 */ - { 0x0000, 0x0000 }, /* R152 */ - { 0x0000, 0x0000 }, /* R153 */ - { 0x0000, 0x0000 }, /* R154 */ - { 0x0000, 0x0000 }, /* R155 */ - { 0x0000, 0x0000 }, /* R156 */ - { 0x0000, 0x0000 }, /* R157 */ - { 0x0000, 0x0000 }, /* R158 */ - { 0x0000, 0x0000 }, /* R159 */ - { 0x0000, 0x0000 }, /* R160 */ - { 0x0000, 0x0000 }, /* R161 */ - { 0x0000, 0x0000 }, /* R162 */ - { 0x0000, 0x0000 }, /* R163 */ - { 0x0000, 0x0000 }, /* R164 */ - { 0x0000, 0x0000 }, /* R165 */ - { 0x0000, 0x0000 }, /* R166 */ - { 0x0000, 0x0000 }, /* R167 */ - { 0x0000, 0x0000 }, /* R168 */ - { 0x0000, 0x0000 }, /* R169 */ - { 0x0000, 0x0000 }, /* R170 */ - { 0x0000, 0x0000 }, /* R171 */ - { 0x0000, 0x0000 }, /* R172 */ - { 0x0000, 0x0000 }, /* R173 */ - { 0x0000, 0x0000 }, /* R174 */ - { 0x0000, 0x0000 }, /* R175 */ - { 0x0000, 0x0000 }, /* R176 */ - { 0x0000, 0x0000 }, /* R177 */ - { 0x0000, 0x0000 }, /* R178 */ - { 0x0000, 0x0000 }, /* R179 */ - { 0x0000, 0x0000 }, /* R180 */ - { 0x0000, 0x0000 }, /* R181 */ - { 0x0000, 0x0000 }, /* R182 */ - { 0x0000, 0x0000 }, /* R183 */ - { 0x0000, 0x0000 }, /* R184 */ - { 0x0000, 0x0000 }, /* R185 */ - { 0x0000, 0x0000 }, /* R186 */ - { 0x0000, 0x0000 }, /* R187 */ - { 0x0000, 0x0000 }, /* R188 */ - { 0x0000, 0x0000 }, /* R189 */ - { 0x0000, 0x0000 }, /* R190 */ - { 0x0000, 0x0000 }, /* R191 */ - { 0x0000, 0x0000 }, /* R192 */ - { 0x0000, 0x0000 }, /* R193 */ - { 0x0000, 0x0000 }, /* R194 */ - { 0x0000, 0x0000 }, /* R195 */ - { 0x0000, 0x0000 }, /* R196 */ - { 0x0000, 0x0000 }, /* R197 */ - { 0x0000, 0x0000 }, /* R198 */ - { 0x0000, 0x0000 }, /* R199 */ - { 0x0000, 0x0000 }, /* R200 */ - { 0x0000, 0x0000 }, /* R201 */ - { 0x0000, 0x0000 }, /* R202 */ - { 0x0000, 0x0000 }, /* R203 */ - { 0x0000, 0x0000 }, /* R204 */ - { 0x0000, 0x0000 }, /* R205 */ - { 0x0000, 0x0000 }, /* R206 */ - { 0x0000, 0x0000 }, /* R207 */ - { 0x0000, 0x0000 }, /* R208 */ - { 0x0000, 0x0000 }, /* R209 */ - { 0x0000, 0x0000 }, /* R210 */ - { 0x0000, 0x0000 }, /* R211 */ - { 0x0000, 0x0000 }, /* R212 */ - { 0x0000, 0x0000 }, /* R213 */ - { 0x0000, 0x0000 }, /* R214 */ - { 0x0000, 0x0000 }, /* R215 */ - { 0x0000, 0x0000 }, /* R216 */ - { 0x0000, 0x0000 }, /* R217 */ - { 0x0000, 0x0000 }, /* R218 */ - { 0x0000, 0x0000 }, /* R219 */ - { 0x0000, 0x0000 }, /* R220 */ - { 0x0000, 0x0000 }, /* R221 */ - { 0x0000, 0x0000 }, /* R222 */ - { 0x0000, 0x0000 }, /* R223 */ - { 0x0000, 0x0000 }, /* R224 */ - { 0x0000, 0x0000 }, /* R225 */ - { 0x0000, 0x0000 }, /* R226 */ - { 0x0000, 0x0000 }, /* R227 */ - { 0x0000, 0x0000 }, /* R228 */ - { 0x0000, 0x0000 }, /* R229 */ - { 0x0000, 0x0000 }, /* R230 */ - { 0x0000, 0x0000 }, /* R231 */ - { 0x0000, 0x0000 }, /* R232 */ - { 0x0000, 0x0000 }, /* R233 */ - { 0x0000, 0x0000 }, /* R234 */ - { 0x0000, 0x0000 }, /* R235 */ - { 0x0000, 0x0000 }, /* R236 */ - { 0x0000, 0x0000 }, /* R237 */ - { 0x0000, 0x0000 }, /* R238 */ - { 0x0000, 0x0000 }, /* R239 */ - { 0x0000, 0x0000 }, /* R240 */ - { 0x0000, 0x0000 }, /* R241 */ - { 0x0000, 0x0000 }, /* R242 */ - { 0x0000, 0x0000 }, /* R243 */ - { 0x0000, 0x0000 }, /* R244 */ - { 0x0000, 0x0000 }, /* R245 */ - { 0x0000, 0x0000 }, /* R246 */ - { 0x0000, 0x0000 }, /* R247 */ - { 0x0000, 0x0000 }, /* R248 */ - { 0x0000, 0x0000 }, /* R249 */ - { 0x0000, 0x0000 }, /* R250 */ - { 0x0000, 0x0000 }, /* R251 */ - { 0x0000, 0x0000 }, /* R252 */ - { 0x0000, 0x0000 }, /* R253 */ - { 0x0000, 0x0000 }, /* R254 */ - { 0x0000, 0x0000 }, /* R255 */ - { 0x000F, 0x0000 }, /* R256 - Chip Revision */ - { 0x0074, 0x0074 }, /* R257 - Control Interface */ - { 0x0000, 0x0000 }, /* R258 */ - { 0x0000, 0x0000 }, /* R259 */ - { 0x0000, 0x0000 }, /* R260 */ - { 0x0000, 0x0000 }, /* R261 */ - { 0x0000, 0x0000 }, /* R262 */ - { 0x0000, 0x0000 }, /* R263 */ - { 0x0000, 0x0000 }, /* R264 */ - { 0x0000, 0x0000 }, /* R265 */ - { 0x0000, 0x0000 }, /* R266 */ - { 0x0000, 0x0000 }, /* R267 */ - { 0x0000, 0x0000 }, /* R268 */ - { 0x0000, 0x0000 }, /* R269 */ - { 0x0000, 0x0000 }, /* R270 */ - { 0x0000, 0x0000 }, /* R271 */ - { 0x807F, 0x837F }, /* R272 - Write Sequencer Ctrl (1) */ - { 0x017F, 0x0000 }, /* R273 - Write Sequencer Ctrl (2) */ - { 0x0000, 0x0000 }, /* R274 */ - { 0x0000, 0x0000 }, /* R275 */ - { 0x0000, 0x0000 }, /* R276 */ - { 0x0000, 0x0000 }, /* R277 */ - { 0x0000, 0x0000 }, /* R278 */ - { 0x0000, 0x0000 }, /* R279 */ - { 0x0000, 0x0000 }, /* R280 */ - { 0x0000, 0x0000 }, /* R281 */ - { 0x0000, 0x0000 }, /* R282 */ - { 0x0000, 0x0000 }, /* R283 */ - { 0x0000, 0x0000 }, /* R284 */ - { 0x0000, 0x0000 }, /* R285 */ - { 0x0000, 0x0000 }, /* R286 */ - { 0x0000, 0x0000 }, /* R287 */ - { 0x0000, 0x0000 }, /* R288 */ - { 0x0000, 0x0000 }, /* R289 */ - { 0x0000, 0x0000 }, /* R290 */ - { 0x0000, 0x0000 }, /* R291 */ - { 0x0000, 0x0000 }, /* R292 */ - { 0x0000, 0x0000 }, /* R293 */ - { 0x0000, 0x0000 }, /* R294 */ - { 0x0000, 0x0000 }, /* R295 */ - { 0x0000, 0x0000 }, /* R296 */ - { 0x0000, 0x0000 }, /* R297 */ - { 0x0000, 0x0000 }, /* R298 */ - { 0x0000, 0x0000 }, /* R299 */ - { 0x0000, 0x0000 }, /* R300 */ - { 0x0000, 0x0000 }, /* R301 */ - { 0x0000, 0x0000 }, /* R302 */ - { 0x0000, 0x0000 }, /* R303 */ - { 0x0000, 0x0000 }, /* R304 */ - { 0x0000, 0x0000 }, /* R305 */ - { 0x0000, 0x0000 }, /* R306 */ - { 0x0000, 0x0000 }, /* R307 */ - { 0x0000, 0x0000 }, /* R308 */ - { 0x0000, 0x0000 }, /* R309 */ - { 0x0000, 0x0000 }, /* R310 */ - { 0x0000, 0x0000 }, /* R311 */ - { 0x0000, 0x0000 }, /* R312 */ - { 0x0000, 0x0000 }, /* R313 */ - { 0x0000, 0x0000 }, /* R314 */ - { 0x0000, 0x0000 }, /* R315 */ - { 0x0000, 0x0000 }, /* R316 */ - { 0x0000, 0x0000 }, /* R317 */ - { 0x0000, 0x0000 }, /* R318 */ - { 0x0000, 0x0000 }, /* R319 */ - { 0x0000, 0x0000 }, /* R320 */ - { 0x0000, 0x0000 }, /* R321 */ - { 0x0000, 0x0000 }, /* R322 */ - { 0x0000, 0x0000 }, /* R323 */ - { 0x0000, 0x0000 }, /* R324 */ - { 0x0000, 0x0000 }, /* R325 */ - { 0x0000, 0x0000 }, /* R326 */ - { 0x0000, 0x0000 }, /* R327 */ - { 0x0000, 0x0000 }, /* R328 */ - { 0x0000, 0x0000 }, /* R329 */ - { 0x0000, 0x0000 }, /* R330 */ - { 0x0000, 0x0000 }, /* R331 */ - { 0x0000, 0x0000 }, /* R332 */ - { 0x0000, 0x0000 }, /* R333 */ - { 0x0000, 0x0000 }, /* R334 */ - { 0x0000, 0x0000 }, /* R335 */ - { 0x0000, 0x0000 }, /* R336 */ - { 0x0000, 0x0000 }, /* R337 */ - { 0x0000, 0x0000 }, /* R338 */ - { 0x0000, 0x0000 }, /* R339 */ - { 0x0000, 0x0000 }, /* R340 */ - { 0x0000, 0x0000 }, /* R341 */ - { 0x0000, 0x0000 }, /* R342 */ - { 0x0000, 0x0000 }, /* R343 */ - { 0x0000, 0x0000 }, /* R344 */ - { 0x0000, 0x0000 }, /* R345 */ - { 0x0000, 0x0000 }, /* R346 */ - { 0x0000, 0x0000 }, /* R347 */ - { 0x0000, 0x0000 }, /* R348 */ - { 0x0000, 0x0000 }, /* R349 */ - { 0x0000, 0x0000 }, /* R350 */ - { 0x0000, 0x0000 }, /* R351 */ - { 0x0000, 0x0000 }, /* R352 */ - { 0x0000, 0x0000 }, /* R353 */ - { 0x0000, 0x0000 }, /* R354 */ - { 0x0000, 0x0000 }, /* R355 */ - { 0x0000, 0x0000 }, /* R356 */ - { 0x0000, 0x0000 }, /* R357 */ - { 0x0000, 0x0000 }, /* R358 */ - { 0x0000, 0x0000 }, /* R359 */ - { 0x0000, 0x0000 }, /* R360 */ - { 0x0000, 0x0000 }, /* R361 */ - { 0x0000, 0x0000 }, /* R362 */ - { 0x0000, 0x0000 }, /* R363 */ - { 0x0000, 0x0000 }, /* R364 */ - { 0x0000, 0x0000 }, /* R365 */ - { 0x0000, 0x0000 }, /* R366 */ - { 0x0000, 0x0000 }, /* R367 */ - { 0x0000, 0x0000 }, /* R368 */ - { 0x0000, 0x0000 }, /* R369 */ - { 0x0000, 0x0000 }, /* R370 */ - { 0x0000, 0x0000 }, /* R371 */ - { 0x0000, 0x0000 }, /* R372 */ - { 0x0000, 0x0000 }, /* R373 */ - { 0x0000, 0x0000 }, /* R374 */ - { 0x0000, 0x0000 }, /* R375 */ - { 0x0000, 0x0000 }, /* R376 */ - { 0x0000, 0x0000 }, /* R377 */ - { 0x0000, 0x0000 }, /* R378 */ - { 0x0000, 0x0000 }, /* R379 */ - { 0x0000, 0x0000 }, /* R380 */ - { 0x0000, 0x0000 }, /* R381 */ - { 0x0000, 0x0000 }, /* R382 */ - { 0x0000, 0x0000 }, /* R383 */ - { 0x0000, 0x0000 }, /* R384 */ - { 0x0000, 0x0000 }, /* R385 */ - { 0x0000, 0x0000 }, /* R386 */ - { 0x0000, 0x0000 }, /* R387 */ - { 0x0000, 0x0000 }, /* R388 */ - { 0x0000, 0x0000 }, /* R389 */ - { 0x0000, 0x0000 }, /* R390 */ - { 0x0000, 0x0000 }, /* R391 */ - { 0x0000, 0x0000 }, /* R392 */ - { 0x0000, 0x0000 }, /* R393 */ - { 0x0000, 0x0000 }, /* R394 */ - { 0x0000, 0x0000 }, /* R395 */ - { 0x0000, 0x0000 }, /* R396 */ - { 0x0000, 0x0000 }, /* R397 */ - { 0x0000, 0x0000 }, /* R398 */ - { 0x0000, 0x0000 }, /* R399 */ - { 0x0000, 0x0000 }, /* R400 */ - { 0x0000, 0x0000 }, /* R401 */ - { 0x0000, 0x0000 }, /* R402 */ - { 0x0000, 0x0000 }, /* R403 */ - { 0x0000, 0x0000 }, /* R404 */ - { 0x0000, 0x0000 }, /* R405 */ - { 0x0000, 0x0000 }, /* R406 */ - { 0x0000, 0x0000 }, /* R407 */ - { 0x0000, 0x0000 }, /* R408 */ - { 0x0000, 0x0000 }, /* R409 */ - { 0x0000, 0x0000 }, /* R410 */ - { 0x0000, 0x0000 }, /* R411 */ - { 0x0000, 0x0000 }, /* R412 */ - { 0x0000, 0x0000 }, /* R413 */ - { 0x0000, 0x0000 }, /* R414 */ - { 0x0000, 0x0000 }, /* R415 */ - { 0x0000, 0x0000 }, /* R416 */ - { 0x0000, 0x0000 }, /* R417 */ - { 0x0000, 0x0000 }, /* R418 */ - { 0x0000, 0x0000 }, /* R419 */ - { 0x0000, 0x0000 }, /* R420 */ - { 0x0000, 0x0000 }, /* R421 */ - { 0x0000, 0x0000 }, /* R422 */ - { 0x0000, 0x0000 }, /* R423 */ - { 0x0000, 0x0000 }, /* R424 */ - { 0x0000, 0x0000 }, /* R425 */ - { 0x0000, 0x0000 }, /* R426 */ - { 0x0000, 0x0000 }, /* R427 */ - { 0x0000, 0x0000 }, /* R428 */ - { 0x0000, 0x0000 }, /* R429 */ - { 0x0000, 0x0000 }, /* R430 */ - { 0x0000, 0x0000 }, /* R431 */ - { 0x0000, 0x0000 }, /* R432 */ - { 0x0000, 0x0000 }, /* R433 */ - { 0x0000, 0x0000 }, /* R434 */ - { 0x0000, 0x0000 }, /* R435 */ - { 0x0000, 0x0000 }, /* R436 */ - { 0x0000, 0x0000 }, /* R437 */ - { 0x0000, 0x0000 }, /* R438 */ - { 0x0000, 0x0000 }, /* R439 */ - { 0x0000, 0x0000 }, /* R440 */ - { 0x0000, 0x0000 }, /* R441 */ - { 0x0000, 0x0000 }, /* R442 */ - { 0x0000, 0x0000 }, /* R443 */ - { 0x0000, 0x0000 }, /* R444 */ - { 0x0000, 0x0000 }, /* R445 */ - { 0x0000, 0x0000 }, /* R446 */ - { 0x0000, 0x0000 }, /* R447 */ - { 0x0000, 0x0000 }, /* R448 */ - { 0x0000, 0x0000 }, /* R449 */ - { 0x0000, 0x0000 }, /* R450 */ - { 0x0000, 0x0000 }, /* R451 */ - { 0x0000, 0x0000 }, /* R452 */ - { 0x0000, 0x0000 }, /* R453 */ - { 0x0000, 0x0000 }, /* R454 */ - { 0x0000, 0x0000 }, /* R455 */ - { 0x0000, 0x0000 }, /* R456 */ - { 0x0000, 0x0000 }, /* R457 */ - { 0x0000, 0x0000 }, /* R458 */ - { 0x0000, 0x0000 }, /* R459 */ - { 0x0000, 0x0000 }, /* R460 */ - { 0x0000, 0x0000 }, /* R461 */ - { 0x0000, 0x0000 }, /* R462 */ - { 0x0000, 0x0000 }, /* R463 */ - { 0x0000, 0x0000 }, /* R464 */ - { 0x0000, 0x0000 }, /* R465 */ - { 0x0000, 0x0000 }, /* R466 */ - { 0x0000, 0x0000 }, /* R467 */ - { 0x0000, 0x0000 }, /* R468 */ - { 0x0000, 0x0000 }, /* R469 */ - { 0x0000, 0x0000 }, /* R470 */ - { 0x0000, 0x0000 }, /* R471 */ - { 0x0000, 0x0000 }, /* R472 */ - { 0x0000, 0x0000 }, /* R473 */ - { 0x0000, 0x0000 }, /* R474 */ - { 0x0000, 0x0000 }, /* R475 */ - { 0x0000, 0x0000 }, /* R476 */ - { 0x0000, 0x0000 }, /* R477 */ - { 0x0000, 0x0000 }, /* R478 */ - { 0x0000, 0x0000 }, /* R479 */ - { 0x0000, 0x0000 }, /* R480 */ - { 0x0000, 0x0000 }, /* R481 */ - { 0x0000, 0x0000 }, /* R482 */ - { 0x0000, 0x0000 }, /* R483 */ - { 0x0000, 0x0000 }, /* R484 */ - { 0x0000, 0x0000 }, /* R485 */ - { 0x0000, 0x0000 }, /* R486 */ - { 0x0000, 0x0000 }, /* R487 */ - { 0x0000, 0x0000 }, /* R488 */ - { 0x0000, 0x0000 }, /* R489 */ - { 0x0000, 0x0000 }, /* R490 */ - { 0x0000, 0x0000 }, /* R491 */ - { 0x0000, 0x0000 }, /* R492 */ - { 0x0000, 0x0000 }, /* R493 */ - { 0x0000, 0x0000 }, /* R494 */ - { 0x0000, 0x0000 }, /* R495 */ - { 0x0000, 0x0000 }, /* R496 */ - { 0x0000, 0x0000 }, /* R497 */ - { 0x0000, 0x0000 }, /* R498 */ - { 0x0000, 0x0000 }, /* R499 */ - { 0x0000, 0x0000 }, /* R500 */ - { 0x0000, 0x0000 }, /* R501 */ - { 0x0000, 0x0000 }, /* R502 */ - { 0x0000, 0x0000 }, /* R503 */ - { 0x0000, 0x0000 }, /* R504 */ - { 0x0000, 0x0000 }, /* R505 */ - { 0x0000, 0x0000 }, /* R506 */ - { 0x0000, 0x0000 }, /* R507 */ - { 0x0000, 0x0000 }, /* R508 */ - { 0x0000, 0x0000 }, /* R509 */ - { 0x0000, 0x0000 }, /* R510 */ - { 0x0000, 0x0000 }, /* R511 */ - { 0x001F, 0x001F }, /* R512 - AIF1 Clocking (1) */ - { 0x003F, 0x003F }, /* R513 - AIF1 Clocking (2) */ - { 0x0000, 0x0000 }, /* R514 */ - { 0x0000, 0x0000 }, /* R515 */ - { 0x001F, 0x001F }, /* R516 - AIF2 Clocking (1) */ - { 0x003F, 0x003F }, /* R517 - AIF2 Clocking (2) */ - { 0x0000, 0x0000 }, /* R518 */ - { 0x0000, 0x0000 }, /* R519 */ - { 0x001F, 0x001F }, /* R520 - Clocking (1) */ - { 0x0777, 0x0777 }, /* R521 - Clocking (2) */ - { 0x0000, 0x0000 }, /* R522 */ - { 0x0000, 0x0000 }, /* R523 */ - { 0x0000, 0x0000 }, /* R524 */ - { 0x0000, 0x0000 }, /* R525 */ - { 0x0000, 0x0000 }, /* R526 */ - { 0x0000, 0x0000 }, /* R527 */ - { 0x00FF, 0x00FF }, /* R528 - AIF1 Rate */ - { 0x00FF, 0x00FF }, /* R529 - AIF2 Rate */ - { 0x000F, 0x0000 }, /* R530 - Rate Status */ - { 0x0000, 0x0000 }, /* R531 */ - { 0x0000, 0x0000 }, /* R532 */ - { 0x0000, 0x0000 }, /* R533 */ - { 0x0000, 0x0000 }, /* R534 */ - { 0x0000, 0x0000 }, /* R535 */ - { 0x0000, 0x0000 }, /* R536 */ - { 0x0000, 0x0000 }, /* R537 */ - { 0x0000, 0x0000 }, /* R538 */ - { 0x0000, 0x0000 }, /* R539 */ - { 0x0000, 0x0000 }, /* R540 */ - { 0x0000, 0x0000 }, /* R541 */ - { 0x0000, 0x0000 }, /* R542 */ - { 0x0000, 0x0000 }, /* R543 */ - { 0x0007, 0x0007 }, /* R544 - FLL1 Control (1) */ - { 0x3F77, 0x3F77 }, /* R545 - FLL1 Control (2) */ - { 0xFFFF, 0xFFFF }, /* R546 - FLL1 Control (3) */ - { 0x7FEF, 0x7FEF }, /* R547 - FLL1 Control (4) */ - { 0x1FDB, 0x1FDB }, /* R548 - FLL1 Control (5) */ - { 0x0000, 0x0000 }, /* R549 */ - { 0x0000, 0x0000 }, /* R550 */ - { 0x0000, 0x0000 }, /* R551 */ - { 0x0000, 0x0000 }, /* R552 */ - { 0x0000, 0x0000 }, /* R553 */ - { 0x0000, 0x0000 }, /* R554 */ - { 0x0000, 0x0000 }, /* R555 */ - { 0x0000, 0x0000 }, /* R556 */ - { 0x0000, 0x0000 }, /* R557 */ - { 0x0000, 0x0000 }, /* R558 */ - { 0x0000, 0x0000 }, /* R559 */ - { 0x0000, 0x0000 }, /* R560 */ - { 0x0000, 0x0000 }, /* R561 */ - { 0x0000, 0x0000 }, /* R562 */ - { 0x0000, 0x0000 }, /* R563 */ - { 0x0000, 0x0000 }, /* R564 */ - { 0x0000, 0x0000 }, /* R565 */ - { 0x0000, 0x0000 }, /* R566 */ - { 0x0000, 0x0000 }, /* R567 */ - { 0x0000, 0x0000 }, /* R568 */ - { 0x0000, 0x0000 }, /* R569 */ - { 0x0000, 0x0000 }, /* R570 */ - { 0x0000, 0x0000 }, /* R571 */ - { 0x0000, 0x0000 }, /* R572 */ - { 0x0000, 0x0000 }, /* R573 */ - { 0x0000, 0x0000 }, /* R574 */ - { 0x0000, 0x0000 }, /* R575 */ - { 0x0007, 0x0007 }, /* R576 - FLL2 Control (1) */ - { 0x3F77, 0x3F77 }, /* R577 - FLL2 Control (2) */ - { 0xFFFF, 0xFFFF }, /* R578 - FLL2 Control (3) */ - { 0x7FEF, 0x7FEF }, /* R579 - FLL2 Control (4) */ - { 0x1FDB, 0x1FDB }, /* R580 - FLL2 Control (5) */ - { 0x0000, 0x0000 }, /* R581 */ - { 0x0000, 0x0000 }, /* R582 */ - { 0x0000, 0x0000 }, /* R583 */ - { 0x0000, 0x0000 }, /* R584 */ - { 0x0000, 0x0000 }, /* R585 */ - { 0x0000, 0x0000 }, /* R586 */ - { 0x0000, 0x0000 }, /* R587 */ - { 0x0000, 0x0000 }, /* R588 */ - { 0x0000, 0x0000 }, /* R589 */ - { 0x0000, 0x0000 }, /* R590 */ - { 0x0000, 0x0000 }, /* R591 */ - { 0x0000, 0x0000 }, /* R592 */ - { 0x0000, 0x0000 }, /* R593 */ - { 0x0000, 0x0000 }, /* R594 */ - { 0x0000, 0x0000 }, /* R595 */ - { 0x0000, 0x0000 }, /* R596 */ - { 0x0000, 0x0000 }, /* R597 */ - { 0x0000, 0x0000 }, /* R598 */ - { 0x0000, 0x0000 }, /* R599 */ - { 0x0000, 0x0000 }, /* R600 */ - { 0x0000, 0x0000 }, /* R601 */ - { 0x0000, 0x0000 }, /* R602 */ - { 0x0000, 0x0000 }, /* R603 */ - { 0x0000, 0x0000 }, /* R604 */ - { 0x0000, 0x0000 }, /* R605 */ - { 0x0000, 0x0000 }, /* R606 */ - { 0x0000, 0x0000 }, /* R607 */ - { 0x0000, 0x0000 }, /* R608 */ - { 0x0000, 0x0000 }, /* R609 */ - { 0x0000, 0x0000 }, /* R610 */ - { 0x0000, 0x0000 }, /* R611 */ - { 0x0000, 0x0000 }, /* R612 */ - { 0x0000, 0x0000 }, /* R613 */ - { 0x0000, 0x0000 }, /* R614 */ - { 0x0000, 0x0000 }, /* R615 */ - { 0x0000, 0x0000 }, /* R616 */ - { 0x0000, 0x0000 }, /* R617 */ - { 0x0000, 0x0000 }, /* R618 */ - { 0x0000, 0x0000 }, /* R619 */ - { 0x0000, 0x0000 }, /* R620 */ - { 0x0000, 0x0000 }, /* R621 */ - { 0x0000, 0x0000 }, /* R622 */ - { 0x0000, 0x0000 }, /* R623 */ - { 0x0000, 0x0000 }, /* R624 */ - { 0x0000, 0x0000 }, /* R625 */ - { 0x0000, 0x0000 }, /* R626 */ - { 0x0000, 0x0000 }, /* R627 */ - { 0x0000, 0x0000 }, /* R628 */ - { 0x0000, 0x0000 }, /* R629 */ - { 0x0000, 0x0000 }, /* R630 */ - { 0x0000, 0x0000 }, /* R631 */ - { 0x0000, 0x0000 }, /* R632 */ - { 0x0000, 0x0000 }, /* R633 */ - { 0x0000, 0x0000 }, /* R634 */ - { 0x0000, 0x0000 }, /* R635 */ - { 0x0000, 0x0000 }, /* R636 */ - { 0x0000, 0x0000 }, /* R637 */ - { 0x0000, 0x0000 }, /* R638 */ - { 0x0000, 0x0000 }, /* R639 */ - { 0x0000, 0x0000 }, /* R640 */ - { 0x0000, 0x0000 }, /* R641 */ - { 0x0000, 0x0000 }, /* R642 */ - { 0x0000, 0x0000 }, /* R643 */ - { 0x0000, 0x0000 }, /* R644 */ - { 0x0000, 0x0000 }, /* R645 */ - { 0x0000, 0x0000 }, /* R646 */ - { 0x0000, 0x0000 }, /* R647 */ - { 0x0000, 0x0000 }, /* R648 */ - { 0x0000, 0x0000 }, /* R649 */ - { 0x0000, 0x0000 }, /* R650 */ - { 0x0000, 0x0000 }, /* R651 */ - { 0x0000, 0x0000 }, /* R652 */ - { 0x0000, 0x0000 }, /* R653 */ - { 0x0000, 0x0000 }, /* R654 */ - { 0x0000, 0x0000 }, /* R655 */ - { 0x0000, 0x0000 }, /* R656 */ - { 0x0000, 0x0000 }, /* R657 */ - { 0x0000, 0x0000 }, /* R658 */ - { 0x0000, 0x0000 }, /* R659 */ - { 0x0000, 0x0000 }, /* R660 */ - { 0x0000, 0x0000 }, /* R661 */ - { 0x0000, 0x0000 }, /* R662 */ - { 0x0000, 0x0000 }, /* R663 */ - { 0x0000, 0x0000 }, /* R664 */ - { 0x0000, 0x0000 }, /* R665 */ - { 0x0000, 0x0000 }, /* R666 */ - { 0x0000, 0x0000 }, /* R667 */ - { 0x0000, 0x0000 }, /* R668 */ - { 0x0000, 0x0000 }, /* R669 */ - { 0x0000, 0x0000 }, /* R670 */ - { 0x0000, 0x0000 }, /* R671 */ - { 0x0000, 0x0000 }, /* R672 */ - { 0x0000, 0x0000 }, /* R673 */ - { 0x0000, 0x0000 }, /* R674 */ - { 0x0000, 0x0000 }, /* R675 */ - { 0x0000, 0x0000 }, /* R676 */ - { 0x0000, 0x0000 }, /* R677 */ - { 0x0000, 0x0000 }, /* R678 */ - { 0x0000, 0x0000 }, /* R679 */ - { 0x0000, 0x0000 }, /* R680 */ - { 0x0000, 0x0000 }, /* R681 */ - { 0x0000, 0x0000 }, /* R682 */ - { 0x0000, 0x0000 }, /* R683 */ - { 0x0000, 0x0000 }, /* R684 */ - { 0x0000, 0x0000 }, /* R685 */ - { 0x0000, 0x0000 }, /* R686 */ - { 0x0000, 0x0000 }, /* R687 */ - { 0x0000, 0x0000 }, /* R688 */ - { 0x0000, 0x0000 }, /* R689 */ - { 0x0000, 0x0000 }, /* R690 */ - { 0x0000, 0x0000 }, /* R691 */ - { 0x0000, 0x0000 }, /* R692 */ - { 0x0000, 0x0000 }, /* R693 */ - { 0x0000, 0x0000 }, /* R694 */ - { 0x0000, 0x0000 }, /* R695 */ - { 0x0000, 0x0000 }, /* R696 */ - { 0x0000, 0x0000 }, /* R697 */ - { 0x0000, 0x0000 }, /* R698 */ - { 0x0000, 0x0000 }, /* R699 */ - { 0x0000, 0x0000 }, /* R700 */ - { 0x0000, 0x0000 }, /* R701 */ - { 0x0000, 0x0000 }, /* R702 */ - { 0x0000, 0x0000 }, /* R703 */ - { 0x0000, 0x0000 }, /* R704 */ - { 0x0000, 0x0000 }, /* R705 */ - { 0x0000, 0x0000 }, /* R706 */ - { 0x0000, 0x0000 }, /* R707 */ - { 0x0000, 0x0000 }, /* R708 */ - { 0x0000, 0x0000 }, /* R709 */ - { 0x0000, 0x0000 }, /* R710 */ - { 0x0000, 0x0000 }, /* R711 */ - { 0x0000, 0x0000 }, /* R712 */ - { 0x0000, 0x0000 }, /* R713 */ - { 0x0000, 0x0000 }, /* R714 */ - { 0x0000, 0x0000 }, /* R715 */ - { 0x0000, 0x0000 }, /* R716 */ - { 0x0000, 0x0000 }, /* R717 */ - { 0x0000, 0x0000 }, /* R718 */ - { 0x0000, 0x0000 }, /* R719 */ - { 0x0000, 0x0000 }, /* R720 */ - { 0x0000, 0x0000 }, /* R721 */ - { 0x0000, 0x0000 }, /* R722 */ - { 0x0000, 0x0000 }, /* R723 */ - { 0x0000, 0x0000 }, /* R724 */ - { 0x0000, 0x0000 }, /* R725 */ - { 0x0000, 0x0000 }, /* R726 */ - { 0x0000, 0x0000 }, /* R727 */ - { 0x0000, 0x0000 }, /* R728 */ - { 0x0000, 0x0000 }, /* R729 */ - { 0x0000, 0x0000 }, /* R730 */ - { 0x0000, 0x0000 }, /* R731 */ - { 0x0000, 0x0000 }, /* R732 */ - { 0x0000, 0x0000 }, /* R733 */ - { 0x0000, 0x0000 }, /* R734 */ - { 0x0000, 0x0000 }, /* R735 */ - { 0x0000, 0x0000 }, /* R736 */ - { 0x0000, 0x0000 }, /* R737 */ - { 0x0000, 0x0000 }, /* R738 */ - { 0x0000, 0x0000 }, /* R739 */ - { 0x0000, 0x0000 }, /* R740 */ - { 0x0000, 0x0000 }, /* R741 */ - { 0x0000, 0x0000 }, /* R742 */ - { 0x0000, 0x0000 }, /* R743 */ - { 0x0000, 0x0000 }, /* R744 */ - { 0x0000, 0x0000 }, /* R745 */ - { 0x0000, 0x0000 }, /* R746 */ - { 0x0000, 0x0000 }, /* R747 */ - { 0x0000, 0x0000 }, /* R748 */ - { 0x0000, 0x0000 }, /* R749 */ - { 0x0000, 0x0000 }, /* R750 */ - { 0x0000, 0x0000 }, /* R751 */ - { 0x0000, 0x0000 }, /* R752 */ - { 0x0000, 0x0000 }, /* R753 */ - { 0x0000, 0x0000 }, /* R754 */ - { 0x0000, 0x0000 }, /* R755 */ - { 0x0000, 0x0000 }, /* R756 */ - { 0x0000, 0x0000 }, /* R757 */ - { 0x0000, 0x0000 }, /* R758 */ - { 0x0000, 0x0000 }, /* R759 */ - { 0x0000, 0x0000 }, /* R760 */ - { 0x0000, 0x0000 }, /* R761 */ - { 0x0000, 0x0000 }, /* R762 */ - { 0x0000, 0x0000 }, /* R763 */ - { 0x0000, 0x0000 }, /* R764 */ - { 0x0000, 0x0000 }, /* R765 */ - { 0x0000, 0x0000 }, /* R766 */ - { 0x0000, 0x0000 }, /* R767 */ - { 0xE1F8, 0xE1F8 }, /* R768 - AIF1 Control (1) */ - { 0xCD1F, 0xCD1F }, /* R769 - AIF1 Control (2) */ - { 0xF000, 0xF000 }, /* R770 - AIF1 Master/Slave */ - { 0x01F0, 0x01F0 }, /* R771 - AIF1 BCLK */ - { 0x0FFF, 0x0FFF }, /* R772 - AIF1ADC LRCLK */ - { 0x0FFF, 0x0FFF }, /* R773 - AIF1DAC LRCLK */ - { 0x0003, 0x0003 }, /* R774 - AIF1DAC Data */ - { 0x0003, 0x0003 }, /* R775 - AIF1ADC Data */ - { 0x0000, 0x0000 }, /* R776 */ - { 0x0000, 0x0000 }, /* R777 */ - { 0x0000, 0x0000 }, /* R778 */ - { 0x0000, 0x0000 }, /* R779 */ - { 0x0000, 0x0000 }, /* R780 */ - { 0x0000, 0x0000 }, /* R781 */ - { 0x0000, 0x0000 }, /* R782 */ - { 0x0000, 0x0000 }, /* R783 */ - { 0xF1F8, 0xF1F8 }, /* R784 - AIF2 Control (1) */ - { 0xFD1F, 0xFD1F }, /* R785 - AIF2 Control (2) */ - { 0xF000, 0xF000 }, /* R786 - AIF2 Master/Slave */ - { 0x01F0, 0x01F0 }, /* R787 - AIF2 BCLK */ - { 0x0FFF, 0x0FFF }, /* R788 - AIF2ADC LRCLK */ - { 0x0FFF, 0x0FFF }, /* R789 - AIF2DAC LRCLK */ - { 0x0003, 0x0003 }, /* R790 - AIF2DAC Data */ - { 0x0003, 0x0003 }, /* R791 - AIF2ADC Data */ - { 0x0000, 0x0000 }, /* R792 */ - { 0x0000, 0x0000 }, /* R793 */ - { 0x0000, 0x0000 }, /* R794 */ - { 0x0000, 0x0000 }, /* R795 */ - { 0x0000, 0x0000 }, /* R796 */ - { 0x0000, 0x0000 }, /* R797 */ - { 0x0000, 0x0000 }, /* R798 */ - { 0x0000, 0x0000 }, /* R799 */ - { 0x0000, 0x0000 }, /* R800 */ - { 0x0000, 0x0000 }, /* R801 */ - { 0x0000, 0x0000 }, /* R802 */ - { 0x0000, 0x0000 }, /* R803 */ - { 0x0000, 0x0000 }, /* R804 */ - { 0x0000, 0x0000 }, /* R805 */ - { 0x0000, 0x0000 }, /* R806 */ - { 0x0000, 0x0000 }, /* R807 */ - { 0x0000, 0x0000 }, /* R808 */ - { 0x0000, 0x0000 }, /* R809 */ - { 0x0000, 0x0000 }, /* R810 */ - { 0x0000, 0x0000 }, /* R811 */ - { 0x0000, 0x0000 }, /* R812 */ - { 0x0000, 0x0000 }, /* R813 */ - { 0x0000, 0x0000 }, /* R814 */ - { 0x0000, 0x0000 }, /* R815 */ - { 0x0000, 0x0000 }, /* R816 */ - { 0x0000, 0x0000 }, /* R817 */ - { 0x0000, 0x0000 }, /* R818 */ - { 0x0000, 0x0000 }, /* R819 */ - { 0x0000, 0x0000 }, /* R820 */ - { 0x0000, 0x0000 }, /* R821 */ - { 0x0000, 0x0000 }, /* R822 */ - { 0x0000, 0x0000 }, /* R823 */ - { 0x0000, 0x0000 }, /* R824 */ - { 0x0000, 0x0000 }, /* R825 */ - { 0x0000, 0x0000 }, /* R826 */ - { 0x0000, 0x0000 }, /* R827 */ - { 0x0000, 0x0000 }, /* R828 */ - { 0x0000, 0x0000 }, /* R829 */ - { 0x0000, 0x0000 }, /* R830 */ - { 0x0000, 0x0000 }, /* R831 */ - { 0x0000, 0x0000 }, /* R832 */ - { 0x0000, 0x0000 }, /* R833 */ - { 0x0000, 0x0000 }, /* R834 */ - { 0x0000, 0x0000 }, /* R835 */ - { 0x0000, 0x0000 }, /* R836 */ - { 0x0000, 0x0000 }, /* R837 */ - { 0x0000, 0x0000 }, /* R838 */ - { 0x0000, 0x0000 }, /* R839 */ - { 0x0000, 0x0000 }, /* R840 */ - { 0x0000, 0x0000 }, /* R841 */ - { 0x0000, 0x0000 }, /* R842 */ - { 0x0000, 0x0000 }, /* R843 */ - { 0x0000, 0x0000 }, /* R844 */ - { 0x0000, 0x0000 }, /* R845 */ - { 0x0000, 0x0000 }, /* R846 */ - { 0x0000, 0x0000 }, /* R847 */ - { 0x0000, 0x0000 }, /* R848 */ - { 0x0000, 0x0000 }, /* R849 */ - { 0x0000, 0x0000 }, /* R850 */ - { 0x0000, 0x0000 }, /* R851 */ - { 0x0000, 0x0000 }, /* R852 */ - { 0x0000, 0x0000 }, /* R853 */ - { 0x0000, 0x0000 }, /* R854 */ - { 0x0000, 0x0000 }, /* R855 */ - { 0x0000, 0x0000 }, /* R856 */ - { 0x0000, 0x0000 }, /* R857 */ - { 0x0000, 0x0000 }, /* R858 */ - { 0x0000, 0x0000 }, /* R859 */ - { 0x0000, 0x0000 }, /* R860 */ - { 0x0000, 0x0000 }, /* R861 */ - { 0x0000, 0x0000 }, /* R862 */ - { 0x0000, 0x0000 }, /* R863 */ - { 0x0000, 0x0000 }, /* R864 */ - { 0x0000, 0x0000 }, /* R865 */ - { 0x0000, 0x0000 }, /* R866 */ - { 0x0000, 0x0000 }, /* R867 */ - { 0x0000, 0x0000 }, /* R868 */ - { 0x0000, 0x0000 }, /* R869 */ - { 0x0000, 0x0000 }, /* R870 */ - { 0x0000, 0x0000 }, /* R871 */ - { 0x0000, 0x0000 }, /* R872 */ - { 0x0000, 0x0000 }, /* R873 */ - { 0x0000, 0x0000 }, /* R874 */ - { 0x0000, 0x0000 }, /* R875 */ - { 0x0000, 0x0000 }, /* R876 */ - { 0x0000, 0x0000 }, /* R877 */ - { 0x0000, 0x0000 }, /* R878 */ - { 0x0000, 0x0000 }, /* R879 */ - { 0x0000, 0x0000 }, /* R880 */ - { 0x0000, 0x0000 }, /* R881 */ - { 0x0000, 0x0000 }, /* R882 */ - { 0x0000, 0x0000 }, /* R883 */ - { 0x0000, 0x0000 }, /* R884 */ - { 0x0000, 0x0000 }, /* R885 */ - { 0x0000, 0x0000 }, /* R886 */ - { 0x0000, 0x0000 }, /* R887 */ - { 0x0000, 0x0000 }, /* R888 */ - { 0x0000, 0x0000 }, /* R889 */ - { 0x0000, 0x0000 }, /* R890 */ - { 0x0000, 0x0000 }, /* R891 */ - { 0x0000, 0x0000 }, /* R892 */ - { 0x0000, 0x0000 }, /* R893 */ - { 0x0000, 0x0000 }, /* R894 */ - { 0x0000, 0x0000 }, /* R895 */ - { 0x0000, 0x0000 }, /* R896 */ - { 0x0000, 0x0000 }, /* R897 */ - { 0x0000, 0x0000 }, /* R898 */ - { 0x0000, 0x0000 }, /* R899 */ - { 0x0000, 0x0000 }, /* R900 */ - { 0x0000, 0x0000 }, /* R901 */ - { 0x0000, 0x0000 }, /* R902 */ - { 0x0000, 0x0000 }, /* R903 */ - { 0x0000, 0x0000 }, /* R904 */ - { 0x0000, 0x0000 }, /* R905 */ - { 0x0000, 0x0000 }, /* R906 */ - { 0x0000, 0x0000 }, /* R907 */ - { 0x0000, 0x0000 }, /* R908 */ - { 0x0000, 0x0000 }, /* R909 */ - { 0x0000, 0x0000 }, /* R910 */ - { 0x0000, 0x0000 }, /* R911 */ - { 0x0000, 0x0000 }, /* R912 */ - { 0x0000, 0x0000 }, /* R913 */ - { 0x0000, 0x0000 }, /* R914 */ - { 0x0000, 0x0000 }, /* R915 */ - { 0x0000, 0x0000 }, /* R916 */ - { 0x0000, 0x0000 }, /* R917 */ - { 0x0000, 0x0000 }, /* R918 */ - { 0x0000, 0x0000 }, /* R919 */ - { 0x0000, 0x0000 }, /* R920 */ - { 0x0000, 0x0000 }, /* R921 */ - { 0x0000, 0x0000 }, /* R922 */ - { 0x0000, 0x0000 }, /* R923 */ - { 0x0000, 0x0000 }, /* R924 */ - { 0x0000, 0x0000 }, /* R925 */ - { 0x0000, 0x0000 }, /* R926 */ - { 0x0000, 0x0000 }, /* R927 */ - { 0x0000, 0x0000 }, /* R928 */ - { 0x0000, 0x0000 }, /* R929 */ - { 0x0000, 0x0000 }, /* R930 */ - { 0x0000, 0x0000 }, /* R931 */ - { 0x0000, 0x0000 }, /* R932 */ - { 0x0000, 0x0000 }, /* R933 */ - { 0x0000, 0x0000 }, /* R934 */ - { 0x0000, 0x0000 }, /* R935 */ - { 0x0000, 0x0000 }, /* R936 */ - { 0x0000, 0x0000 }, /* R937 */ - { 0x0000, 0x0000 }, /* R938 */ - { 0x0000, 0x0000 }, /* R939 */ - { 0x0000, 0x0000 }, /* R940 */ - { 0x0000, 0x0000 }, /* R941 */ - { 0x0000, 0x0000 }, /* R942 */ - { 0x0000, 0x0000 }, /* R943 */ - { 0x0000, 0x0000 }, /* R944 */ - { 0x0000, 0x0000 }, /* R945 */ - { 0x0000, 0x0000 }, /* R946 */ - { 0x0000, 0x0000 }, /* R947 */ - { 0x0000, 0x0000 }, /* R948 */ - { 0x0000, 0x0000 }, /* R949 */ - { 0x0000, 0x0000 }, /* R950 */ - { 0x0000, 0x0000 }, /* R951 */ - { 0x0000, 0x0000 }, /* R952 */ - { 0x0000, 0x0000 }, /* R953 */ - { 0x0000, 0x0000 }, /* R954 */ - { 0x0000, 0x0000 }, /* R955 */ - { 0x0000, 0x0000 }, /* R956 */ - { 0x0000, 0x0000 }, /* R957 */ - { 0x0000, 0x0000 }, /* R958 */ - { 0x0000, 0x0000 }, /* R959 */ - { 0x0000, 0x0000 }, /* R960 */ - { 0x0000, 0x0000 }, /* R961 */ - { 0x0000, 0x0000 }, /* R962 */ - { 0x0000, 0x0000 }, /* R963 */ - { 0x0000, 0x0000 }, /* R964 */ - { 0x0000, 0x0000 }, /* R965 */ - { 0x0000, 0x0000 }, /* R966 */ - { 0x0000, 0x0000 }, /* R967 */ - { 0x0000, 0x0000 }, /* R968 */ - { 0x0000, 0x0000 }, /* R969 */ - { 0x0000, 0x0000 }, /* R970 */ - { 0x0000, 0x0000 }, /* R971 */ - { 0x0000, 0x0000 }, /* R972 */ - { 0x0000, 0x0000 }, /* R973 */ - { 0x0000, 0x0000 }, /* R974 */ - { 0x0000, 0x0000 }, /* R975 */ - { 0x0000, 0x0000 }, /* R976 */ - { 0x0000, 0x0000 }, /* R977 */ - { 0x0000, 0x0000 }, /* R978 */ - { 0x0000, 0x0000 }, /* R979 */ - { 0x0000, 0x0000 }, /* R980 */ - { 0x0000, 0x0000 }, /* R981 */ - { 0x0000, 0x0000 }, /* R982 */ - { 0x0000, 0x0000 }, /* R983 */ - { 0x0000, 0x0000 }, /* R984 */ - { 0x0000, 0x0000 }, /* R985 */ - { 0x0000, 0x0000 }, /* R986 */ - { 0x0000, 0x0000 }, /* R987 */ - { 0x0000, 0x0000 }, /* R988 */ - { 0x0000, 0x0000 }, /* R989 */ - { 0x0000, 0x0000 }, /* R990 */ - { 0x0000, 0x0000 }, /* R991 */ - { 0x0000, 0x0000 }, /* R992 */ - { 0x0000, 0x0000 }, /* R993 */ - { 0x0000, 0x0000 }, /* R994 */ - { 0x0000, 0x0000 }, /* R995 */ - { 0x0000, 0x0000 }, /* R996 */ - { 0x0000, 0x0000 }, /* R997 */ - { 0x0000, 0x0000 }, /* R998 */ - { 0x0000, 0x0000 }, /* R999 */ - { 0x0000, 0x0000 }, /* R1000 */ - { 0x0000, 0x0000 }, /* R1001 */ - { 0x0000, 0x0000 }, /* R1002 */ - { 0x0000, 0x0000 }, /* R1003 */ - { 0x0000, 0x0000 }, /* R1004 */ - { 0x0000, 0x0000 }, /* R1005 */ - { 0x0000, 0x0000 }, /* R1006 */ - { 0x0000, 0x0000 }, /* R1007 */ - { 0x0000, 0x0000 }, /* R1008 */ - { 0x0000, 0x0000 }, /* R1009 */ - { 0x0000, 0x0000 }, /* R1010 */ - { 0x0000, 0x0000 }, /* R1011 */ - { 0x0000, 0x0000 }, /* R1012 */ - { 0x0000, 0x0000 }, /* R1013 */ - { 0x0000, 0x0000 }, /* R1014 */ - { 0x0000, 0x0000 }, /* R1015 */ - { 0x0000, 0x0000 }, /* R1016 */ - { 0x0000, 0x0000 }, /* R1017 */ - { 0x0000, 0x0000 }, /* R1018 */ - { 0x0000, 0x0000 }, /* R1019 */ - { 0x0000, 0x0000 }, /* R1020 */ - { 0x0000, 0x0000 }, /* R1021 */ - { 0x0000, 0x0000 }, /* R1022 */ - { 0x0000, 0x0000 }, /* R1023 */ - { 0x00FF, 0x01FF }, /* R1024 - AIF1 ADC1 Left Volume */ - { 0x00FF, 0x01FF }, /* R1025 - AIF1 ADC1 Right Volume */ - { 0x00FF, 0x01FF }, /* R1026 - AIF1 DAC1 Left Volume */ - { 0x00FF, 0x01FF }, /* R1027 - AIF1 DAC1 Right Volume */ - { 0x00FF, 0x01FF }, /* R1028 - AIF1 ADC2 Left Volume */ - { 0x00FF, 0x01FF }, /* R1029 - AIF1 ADC2 Right Volume */ - { 0x00FF, 0x01FF }, /* R1030 - AIF1 DAC2 Left Volume */ - { 0x00FF, 0x01FF }, /* R1031 - AIF1 DAC2 Right Volume */ - { 0x0000, 0x0000 }, /* R1032 */ - { 0x0000, 0x0000 }, /* R1033 */ - { 0x0000, 0x0000 }, /* R1034 */ - { 0x0000, 0x0000 }, /* R1035 */ - { 0x0000, 0x0000 }, /* R1036 */ - { 0x0000, 0x0000 }, /* R1037 */ - { 0x0000, 0x0000 }, /* R1038 */ - { 0x0000, 0x0000 }, /* R1039 */ - { 0xF800, 0xF800 }, /* R1040 - AIF1 ADC1 Filters */ - { 0x7800, 0x7800 }, /* R1041 - AIF1 ADC2 Filters */ - { 0x0000, 0x0000 }, /* R1042 */ - { 0x0000, 0x0000 }, /* R1043 */ - { 0x0000, 0x0000 }, /* R1044 */ - { 0x0000, 0x0000 }, /* R1045 */ - { 0x0000, 0x0000 }, /* R1046 */ - { 0x0000, 0x0000 }, /* R1047 */ - { 0x0000, 0x0000 }, /* R1048 */ - { 0x0000, 0x0000 }, /* R1049 */ - { 0x0000, 0x0000 }, /* R1050 */ - { 0x0000, 0x0000 }, /* R1051 */ - { 0x0000, 0x0000 }, /* R1052 */ - { 0x0000, 0x0000 }, /* R1053 */ - { 0x0000, 0x0000 }, /* R1054 */ - { 0x0000, 0x0000 }, /* R1055 */ - { 0x02B6, 0x02B6 }, /* R1056 - AIF1 DAC1 Filters (1) */ - { 0x3F00, 0x3F00 }, /* R1057 - AIF1 DAC1 Filters (2) */ - { 0x02B6, 0x02B6 }, /* R1058 - AIF1 DAC2 Filters (1) */ - { 0x3F00, 0x3F00 }, /* R1059 - AIF1 DAC2 Filters (2) */ - { 0x0000, 0x0000 }, /* R1060 */ - { 0x0000, 0x0000 }, /* R1061 */ - { 0x0000, 0x0000 }, /* R1062 */ - { 0x0000, 0x0000 }, /* R1063 */ - { 0x0000, 0x0000 }, /* R1064 */ - { 0x0000, 0x0000 }, /* R1065 */ - { 0x0000, 0x0000 }, /* R1066 */ - { 0x0000, 0x0000 }, /* R1067 */ - { 0x0000, 0x0000 }, /* R1068 */ - { 0x0000, 0x0000 }, /* R1069 */ - { 0x0000, 0x0000 }, /* R1070 */ - { 0x0000, 0x0000 }, /* R1071 */ - { 0x0000, 0x0000 }, /* R1072 */ - { 0x0000, 0x0000 }, /* R1073 */ - { 0x0000, 0x0000 }, /* R1074 */ - { 0x0000, 0x0000 }, /* R1075 */ - { 0x0000, 0x0000 }, /* R1076 */ - { 0x0000, 0x0000 }, /* R1077 */ - { 0x0000, 0x0000 }, /* R1078 */ - { 0x0000, 0x0000 }, /* R1079 */ - { 0x0000, 0x0000 }, /* R1080 */ - { 0x0000, 0x0000 }, /* R1081 */ - { 0x0000, 0x0000 }, /* R1082 */ - { 0x0000, 0x0000 }, /* R1083 */ - { 0x0000, 0x0000 }, /* R1084 */ - { 0x0000, 0x0000 }, /* R1085 */ - { 0x0000, 0x0000 }, /* R1086 */ - { 0x0000, 0x0000 }, /* R1087 */ - { 0xFFFF, 0xFFFF }, /* R1088 - AIF1 DRC1 (1) */ - { 0x1FFF, 0x1FFF }, /* R1089 - AIF1 DRC1 (2) */ - { 0xFFFF, 0xFFFF }, /* R1090 - AIF1 DRC1 (3) */ - { 0x07FF, 0x07FF }, /* R1091 - AIF1 DRC1 (4) */ - { 0x03FF, 0x03FF }, /* R1092 - AIF1 DRC1 (5) */ - { 0x0000, 0x0000 }, /* R1093 */ - { 0x0000, 0x0000 }, /* R1094 */ - { 0x0000, 0x0000 }, /* R1095 */ - { 0x0000, 0x0000 }, /* R1096 */ - { 0x0000, 0x0000 }, /* R1097 */ - { 0x0000, 0x0000 }, /* R1098 */ - { 0x0000, 0x0000 }, /* R1099 */ - { 0x0000, 0x0000 }, /* R1100 */ - { 0x0000, 0x0000 }, /* R1101 */ - { 0x0000, 0x0000 }, /* R1102 */ - { 0x0000, 0x0000 }, /* R1103 */ - { 0xFFFF, 0xFFFF }, /* R1104 - AIF1 DRC2 (1) */ - { 0x1FFF, 0x1FFF }, /* R1105 - AIF1 DRC2 (2) */ - { 0xFFFF, 0xFFFF }, /* R1106 - AIF1 DRC2 (3) */ - { 0x07FF, 0x07FF }, /* R1107 - AIF1 DRC2 (4) */ - { 0x03FF, 0x03FF }, /* R1108 - AIF1 DRC2 (5) */ - { 0x0000, 0x0000 }, /* R1109 */ - { 0x0000, 0x0000 }, /* R1110 */ - { 0x0000, 0x0000 }, /* R1111 */ - { 0x0000, 0x0000 }, /* R1112 */ - { 0x0000, 0x0000 }, /* R1113 */ - { 0x0000, 0x0000 }, /* R1114 */ - { 0x0000, 0x0000 }, /* R1115 */ - { 0x0000, 0x0000 }, /* R1116 */ - { 0x0000, 0x0000 }, /* R1117 */ - { 0x0000, 0x0000 }, /* R1118 */ - { 0x0000, 0x0000 }, /* R1119 */ - { 0x0000, 0x0000 }, /* R1120 */ - { 0x0000, 0x0000 }, /* R1121 */ - { 0x0000, 0x0000 }, /* R1122 */ - { 0x0000, 0x0000 }, /* R1123 */ - { 0x0000, 0x0000 }, /* R1124 */ - { 0x0000, 0x0000 }, /* R1125 */ - { 0x0000, 0x0000 }, /* R1126 */ - { 0x0000, 0x0000 }, /* R1127 */ - { 0x0000, 0x0000 }, /* R1128 */ - { 0x0000, 0x0000 }, /* R1129 */ - { 0x0000, 0x0000 }, /* R1130 */ - { 0x0000, 0x0000 }, /* R1131 */ - { 0x0000, 0x0000 }, /* R1132 */ - { 0x0000, 0x0000 }, /* R1133 */ - { 0x0000, 0x0000 }, /* R1134 */ - { 0x0000, 0x0000 }, /* R1135 */ - { 0x0000, 0x0000 }, /* R1136 */ - { 0x0000, 0x0000 }, /* R1137 */ - { 0x0000, 0x0000 }, /* R1138 */ - { 0x0000, 0x0000 }, /* R1139 */ - { 0x0000, 0x0000 }, /* R1140 */ - { 0x0000, 0x0000 }, /* R1141 */ - { 0x0000, 0x0000 }, /* R1142 */ - { 0x0000, 0x0000 }, /* R1143 */ - { 0x0000, 0x0000 }, /* R1144 */ - { 0x0000, 0x0000 }, /* R1145 */ - { 0x0000, 0x0000 }, /* R1146 */ - { 0x0000, 0x0000 }, /* R1147 */ - { 0x0000, 0x0000 }, /* R1148 */ - { 0x0000, 0x0000 }, /* R1149 */ - { 0x0000, 0x0000 }, /* R1150 */ - { 0x0000, 0x0000 }, /* R1151 */ - { 0xFFFF, 0xFFFF }, /* R1152 - AIF1 DAC1 EQ Gains (1) */ - { 0xFFC0, 0xFFC0 }, /* R1153 - AIF1 DAC1 EQ Gains (2) */ - { 0xFFFF, 0xFFFF }, /* R1154 - AIF1 DAC1 EQ Band 1 A */ - { 0xFFFF, 0xFFFF }, /* R1155 - AIF1 DAC1 EQ Band 1 B */ - { 0xFFFF, 0xFFFF }, /* R1156 - AIF1 DAC1 EQ Band 1 PG */ - { 0xFFFF, 0xFFFF }, /* R1157 - AIF1 DAC1 EQ Band 2 A */ - { 0xFFFF, 0xFFFF }, /* R1158 - AIF1 DAC1 EQ Band 2 B */ - { 0xFFFF, 0xFFFF }, /* R1159 - AIF1 DAC1 EQ Band 2 C */ - { 0xFFFF, 0xFFFF }, /* R1160 - AIF1 DAC1 EQ Band 2 PG */ - { 0xFFFF, 0xFFFF }, /* R1161 - AIF1 DAC1 EQ Band 3 A */ - { 0xFFFF, 0xFFFF }, /* R1162 - AIF1 DAC1 EQ Band 3 B */ - { 0xFFFF, 0xFFFF }, /* R1163 - AIF1 DAC1 EQ Band 3 C */ - { 0xFFFF, 0xFFFF }, /* R1164 - AIF1 DAC1 EQ Band 3 PG */ - { 0xFFFF, 0xFFFF }, /* R1165 - AIF1 DAC1 EQ Band 4 A */ - { 0xFFFF, 0xFFFF }, /* R1166 - AIF1 DAC1 EQ Band 4 B */ - { 0xFFFF, 0xFFFF }, /* R1167 - AIF1 DAC1 EQ Band 4 C */ - { 0xFFFF, 0xFFFF }, /* R1168 - AIF1 DAC1 EQ Band 4 PG */ - { 0xFFFF, 0xFFFF }, /* R1169 - AIF1 DAC1 EQ Band 5 A */ - { 0xFFFF, 0xFFFF }, /* R1170 - AIF1 DAC1 EQ Band 5 B */ - { 0xFFFF, 0xFFFF }, /* R1171 - AIF1 DAC1 EQ Band 5 PG */ - { 0x0000, 0x0000 }, /* R1172 */ - { 0x0000, 0x0000 }, /* R1173 */ - { 0x0000, 0x0000 }, /* R1174 */ - { 0x0000, 0x0000 }, /* R1175 */ - { 0x0000, 0x0000 }, /* R1176 */ - { 0x0000, 0x0000 }, /* R1177 */ - { 0x0000, 0x0000 }, /* R1178 */ - { 0x0000, 0x0000 }, /* R1179 */ - { 0x0000, 0x0000 }, /* R1180 */ - { 0x0000, 0x0000 }, /* R1181 */ - { 0x0000, 0x0000 }, /* R1182 */ - { 0x0000, 0x0000 }, /* R1183 */ - { 0xFFFF, 0xFFFF }, /* R1184 - AIF1 DAC2 EQ Gains (1) */ - { 0xFFC0, 0xFFC0 }, /* R1185 - AIF1 DAC2 EQ Gains (2) */ - { 0xFFFF, 0xFFFF }, /* R1186 - AIF1 DAC2 EQ Band 1 A */ - { 0xFFFF, 0xFFFF }, /* R1187 - AIF1 DAC2 EQ Band 1 B */ - { 0xFFFF, 0xFFFF }, /* R1188 - AIF1 DAC2 EQ Band 1 PG */ - { 0xFFFF, 0xFFFF }, /* R1189 - AIF1 DAC2 EQ Band 2 A */ - { 0xFFFF, 0xFFFF }, /* R1190 - AIF1 DAC2 EQ Band 2 B */ - { 0xFFFF, 0xFFFF }, /* R1191 - AIF1 DAC2 EQ Band 2 C */ - { 0xFFFF, 0xFFFF }, /* R1192 - AIF1 DAC2 EQ Band 2 PG */ - { 0xFFFF, 0xFFFF }, /* R1193 - AIF1 DAC2 EQ Band 3 A */ - { 0xFFFF, 0xFFFF }, /* R1194 - AIF1 DAC2 EQ Band 3 B */ - { 0xFFFF, 0xFFFF }, /* R1195 - AIF1 DAC2 EQ Band 3 C */ - { 0xFFFF, 0xFFFF }, /* R1196 - AIF1 DAC2 EQ Band 3 PG */ - { 0xFFFF, 0xFFFF }, /* R1197 - AIF1 DAC2 EQ Band 4 A */ - { 0xFFFF, 0xFFFF }, /* R1198 - AIF1 DAC2 EQ Band 4 B */ - { 0xFFFF, 0xFFFF }, /* R1199 - AIF1 DAC2 EQ Band 4 C */ - { 0xFFFF, 0xFFFF }, /* R1200 - AIF1 DAC2 EQ Band 4 PG */ - { 0xFFFF, 0xFFFF }, /* R1201 - AIF1 DAC2 EQ Band 5 A */ - { 0xFFFF, 0xFFFF }, /* R1202 - AIF1 DAC2 EQ Band 5 B */ - { 0xFFFF, 0xFFFF }, /* R1203 - AIF1 DAC2 EQ Band 5 PG */ - { 0x0000, 0x0000 }, /* R1204 */ - { 0x0000, 0x0000 }, /* R1205 */ - { 0x0000, 0x0000 }, /* R1206 */ - { 0x0000, 0x0000 }, /* R1207 */ - { 0x0000, 0x0000 }, /* R1208 */ - { 0x0000, 0x0000 }, /* R1209 */ - { 0x0000, 0x0000 }, /* R1210 */ - { 0x0000, 0x0000 }, /* R1211 */ - { 0x0000, 0x0000 }, /* R1212 */ - { 0x0000, 0x0000 }, /* R1213 */ - { 0x0000, 0x0000 }, /* R1214 */ - { 0x0000, 0x0000 }, /* R1215 */ - { 0x0000, 0x0000 }, /* R1216 */ - { 0x0000, 0x0000 }, /* R1217 */ - { 0x0000, 0x0000 }, /* R1218 */ - { 0x0000, 0x0000 }, /* R1219 */ - { 0x0000, 0x0000 }, /* R1220 */ - { 0x0000, 0x0000 }, /* R1221 */ - { 0x0000, 0x0000 }, /* R1222 */ - { 0x0000, 0x0000 }, /* R1223 */ - { 0x0000, 0x0000 }, /* R1224 */ - { 0x0000, 0x0000 }, /* R1225 */ - { 0x0000, 0x0000 }, /* R1226 */ - { 0x0000, 0x0000 }, /* R1227 */ - { 0x0000, 0x0000 }, /* R1228 */ - { 0x0000, 0x0000 }, /* R1229 */ - { 0x0000, 0x0000 }, /* R1230 */ - { 0x0000, 0x0000 }, /* R1231 */ - { 0x0000, 0x0000 }, /* R1232 */ - { 0x0000, 0x0000 }, /* R1233 */ - { 0x0000, 0x0000 }, /* R1234 */ - { 0x0000, 0x0000 }, /* R1235 */ - { 0x0000, 0x0000 }, /* R1236 */ - { 0x0000, 0x0000 }, /* R1237 */ - { 0x0000, 0x0000 }, /* R1238 */ - { 0x0000, 0x0000 }, /* R1239 */ - { 0x0000, 0x0000 }, /* R1240 */ - { 0x0000, 0x0000 }, /* R1241 */ - { 0x0000, 0x0000 }, /* R1242 */ - { 0x0000, 0x0000 }, /* R1243 */ - { 0x0000, 0x0000 }, /* R1244 */ - { 0x0000, 0x0000 }, /* R1245 */ - { 0x0000, 0x0000 }, /* R1246 */ - { 0x0000, 0x0000 }, /* R1247 */ - { 0x0000, 0x0000 }, /* R1248 */ - { 0x0000, 0x0000 }, /* R1249 */ - { 0x0000, 0x0000 }, /* R1250 */ - { 0x0000, 0x0000 }, /* R1251 */ - { 0x0000, 0x0000 }, /* R1252 */ - { 0x0000, 0x0000 }, /* R1253 */ - { 0x0000, 0x0000 }, /* R1254 */ - { 0x0000, 0x0000 }, /* R1255 */ - { 0x0000, 0x0000 }, /* R1256 */ - { 0x0000, 0x0000 }, /* R1257 */ - { 0x0000, 0x0000 }, /* R1258 */ - { 0x0000, 0x0000 }, /* R1259 */ - { 0x0000, 0x0000 }, /* R1260 */ - { 0x0000, 0x0000 }, /* R1261 */ - { 0x0000, 0x0000 }, /* R1262 */ - { 0x0000, 0x0000 }, /* R1263 */ - { 0x0000, 0x0000 }, /* R1264 */ - { 0x0000, 0x0000 }, /* R1265 */ - { 0x0000, 0x0000 }, /* R1266 */ - { 0x0000, 0x0000 }, /* R1267 */ - { 0x0000, 0x0000 }, /* R1268 */ - { 0x0000, 0x0000 }, /* R1269 */ - { 0x0000, 0x0000 }, /* R1270 */ - { 0x0000, 0x0000 }, /* R1271 */ - { 0x0000, 0x0000 }, /* R1272 */ - { 0x0000, 0x0000 }, /* R1273 */ - { 0x0000, 0x0000 }, /* R1274 */ - { 0x0000, 0x0000 }, /* R1275 */ - { 0x0000, 0x0000 }, /* R1276 */ - { 0x0000, 0x0000 }, /* R1277 */ - { 0x0000, 0x0000 }, /* R1278 */ - { 0x0000, 0x0000 }, /* R1279 */ - { 0x00FF, 0x01FF }, /* R1280 - AIF2 ADC Left Volume */ - { 0x00FF, 0x01FF }, /* R1281 - AIF2 ADC Right Volume */ - { 0x00FF, 0x01FF }, /* R1282 - AIF2 DAC Left Volume */ - { 0x00FF, 0x01FF }, /* R1283 - AIF2 DAC Right Volume */ - { 0x0000, 0x0000 }, /* R1284 */ - { 0x0000, 0x0000 }, /* R1285 */ - { 0x0000, 0x0000 }, /* R1286 */ - { 0x0000, 0x0000 }, /* R1287 */ - { 0x0000, 0x0000 }, /* R1288 */ - { 0x0000, 0x0000 }, /* R1289 */ - { 0x0000, 0x0000 }, /* R1290 */ - { 0x0000, 0x0000 }, /* R1291 */ - { 0x0000, 0x0000 }, /* R1292 */ - { 0x0000, 0x0000 }, /* R1293 */ - { 0x0000, 0x0000 }, /* R1294 */ - { 0x0000, 0x0000 }, /* R1295 */ - { 0xF800, 0xF800 }, /* R1296 - AIF2 ADC Filters */ - { 0x0000, 0x0000 }, /* R1297 */ - { 0x0000, 0x0000 }, /* R1298 */ - { 0x0000, 0x0000 }, /* R1299 */ - { 0x0000, 0x0000 }, /* R1300 */ - { 0x0000, 0x0000 }, /* R1301 */ - { 0x0000, 0x0000 }, /* R1302 */ - { 0x0000, 0x0000 }, /* R1303 */ - { 0x0000, 0x0000 }, /* R1304 */ - { 0x0000, 0x0000 }, /* R1305 */ - { 0x0000, 0x0000 }, /* R1306 */ - { 0x0000, 0x0000 }, /* R1307 */ - { 0x0000, 0x0000 }, /* R1308 */ - { 0x0000, 0x0000 }, /* R1309 */ - { 0x0000, 0x0000 }, /* R1310 */ - { 0x0000, 0x0000 }, /* R1311 */ - { 0x02B6, 0x02B6 }, /* R1312 - AIF2 DAC Filters (1) */ - { 0x3F00, 0x3F00 }, /* R1313 - AIF2 DAC Filters (2) */ - { 0x0000, 0x0000 }, /* R1314 */ - { 0x0000, 0x0000 }, /* R1315 */ - { 0x0000, 0x0000 }, /* R1316 */ - { 0x0000, 0x0000 }, /* R1317 */ - { 0x0000, 0x0000 }, /* R1318 */ - { 0x0000, 0x0000 }, /* R1319 */ - { 0x0000, 0x0000 }, /* R1320 */ - { 0x0000, 0x0000 }, /* R1321 */ - { 0x0000, 0x0000 }, /* R1322 */ - { 0x0000, 0x0000 }, /* R1323 */ - { 0x0000, 0x0000 }, /* R1324 */ - { 0x0000, 0x0000 }, /* R1325 */ - { 0x0000, 0x0000 }, /* R1326 */ - { 0x0000, 0x0000 }, /* R1327 */ - { 0x0000, 0x0000 }, /* R1328 */ - { 0x0000, 0x0000 }, /* R1329 */ - { 0x0000, 0x0000 }, /* R1330 */ - { 0x0000, 0x0000 }, /* R1331 */ - { 0x0000, 0x0000 }, /* R1332 */ - { 0x0000, 0x0000 }, /* R1333 */ - { 0x0000, 0x0000 }, /* R1334 */ - { 0x0000, 0x0000 }, /* R1335 */ - { 0x0000, 0x0000 }, /* R1336 */ - { 0x0000, 0x0000 }, /* R1337 */ - { 0x0000, 0x0000 }, /* R1338 */ - { 0x0000, 0x0000 }, /* R1339 */ - { 0x0000, 0x0000 }, /* R1340 */ - { 0x0000, 0x0000 }, /* R1341 */ - { 0x0000, 0x0000 }, /* R1342 */ - { 0x0000, 0x0000 }, /* R1343 */ - { 0xFFFF, 0xFFFF }, /* R1344 - AIF2 DRC (1) */ - { 0x1FFF, 0x1FFF }, /* R1345 - AIF2 DRC (2) */ - { 0xFFFF, 0xFFFF }, /* R1346 - AIF2 DRC (3) */ - { 0x07FF, 0x07FF }, /* R1347 - AIF2 DRC (4) */ - { 0x03FF, 0x03FF }, /* R1348 - AIF2 DRC (5) */ - { 0x0000, 0x0000 }, /* R1349 */ - { 0x0000, 0x0000 }, /* R1350 */ - { 0x0000, 0x0000 }, /* R1351 */ - { 0x0000, 0x0000 }, /* R1352 */ - { 0x0000, 0x0000 }, /* R1353 */ - { 0x0000, 0x0000 }, /* R1354 */ - { 0x0000, 0x0000 }, /* R1355 */ - { 0x0000, 0x0000 }, /* R1356 */ - { 0x0000, 0x0000 }, /* R1357 */ - { 0x0000, 0x0000 }, /* R1358 */ - { 0x0000, 0x0000 }, /* R1359 */ - { 0x0000, 0x0000 }, /* R1360 */ - { 0x0000, 0x0000 }, /* R1361 */ - { 0x0000, 0x0000 }, /* R1362 */ - { 0x0000, 0x0000 }, /* R1363 */ - { 0x0000, 0x0000 }, /* R1364 */ - { 0x0000, 0x0000 }, /* R1365 */ - { 0x0000, 0x0000 }, /* R1366 */ - { 0x0000, 0x0000 }, /* R1367 */ - { 0x0000, 0x0000 }, /* R1368 */ - { 0x0000, 0x0000 }, /* R1369 */ - { 0x0000, 0x0000 }, /* R1370 */ - { 0x0000, 0x0000 }, /* R1371 */ - { 0x0000, 0x0000 }, /* R1372 */ - { 0x0000, 0x0000 }, /* R1373 */ - { 0x0000, 0x0000 }, /* R1374 */ - { 0x0000, 0x0000 }, /* R1375 */ - { 0x0000, 0x0000 }, /* R1376 */ - { 0x0000, 0x0000 }, /* R1377 */ - { 0x0000, 0x0000 }, /* R1378 */ - { 0x0000, 0x0000 }, /* R1379 */ - { 0x0000, 0x0000 }, /* R1380 */ - { 0x0000, 0x0000 }, /* R1381 */ - { 0x0000, 0x0000 }, /* R1382 */ - { 0x0000, 0x0000 }, /* R1383 */ - { 0x0000, 0x0000 }, /* R1384 */ - { 0x0000, 0x0000 }, /* R1385 */ - { 0x0000, 0x0000 }, /* R1386 */ - { 0x0000, 0x0000 }, /* R1387 */ - { 0x0000, 0x0000 }, /* R1388 */ - { 0x0000, 0x0000 }, /* R1389 */ - { 0x0000, 0x0000 }, /* R1390 */ - { 0x0000, 0x0000 }, /* R1391 */ - { 0x0000, 0x0000 }, /* R1392 */ - { 0x0000, 0x0000 }, /* R1393 */ - { 0x0000, 0x0000 }, /* R1394 */ - { 0x0000, 0x0000 }, /* R1395 */ - { 0x0000, 0x0000 }, /* R1396 */ - { 0x0000, 0x0000 }, /* R1397 */ - { 0x0000, 0x0000 }, /* R1398 */ - { 0x0000, 0x0000 }, /* R1399 */ - { 0x0000, 0x0000 }, /* R1400 */ - { 0x0000, 0x0000 }, /* R1401 */ - { 0x0000, 0x0000 }, /* R1402 */ - { 0x0000, 0x0000 }, /* R1403 */ - { 0x0000, 0x0000 }, /* R1404 */ - { 0x0000, 0x0000 }, /* R1405 */ - { 0x0000, 0x0000 }, /* R1406 */ - { 0x0000, 0x0000 }, /* R1407 */ - { 0xFFFF, 0xFFFF }, /* R1408 - AIF2 EQ Gains (1) */ - { 0xFFC0, 0xFFC0 }, /* R1409 - AIF2 EQ Gains (2) */ - { 0xFFFF, 0xFFFF }, /* R1410 - AIF2 EQ Band 1 A */ - { 0xFFFF, 0xFFFF }, /* R1411 - AIF2 EQ Band 1 B */ - { 0xFFFF, 0xFFFF }, /* R1412 - AIF2 EQ Band 1 PG */ - { 0xFFFF, 0xFFFF }, /* R1413 - AIF2 EQ Band 2 A */ - { 0xFFFF, 0xFFFF }, /* R1414 - AIF2 EQ Band 2 B */ - { 0xFFFF, 0xFFFF }, /* R1415 - AIF2 EQ Band 2 C */ - { 0xFFFF, 0xFFFF }, /* R1416 - AIF2 EQ Band 2 PG */ - { 0xFFFF, 0xFFFF }, /* R1417 - AIF2 EQ Band 3 A */ - { 0xFFFF, 0xFFFF }, /* R1418 - AIF2 EQ Band 3 B */ - { 0xFFFF, 0xFFFF }, /* R1419 - AIF2 EQ Band 3 C */ - { 0xFFFF, 0xFFFF }, /* R1420 - AIF2 EQ Band 3 PG */ - { 0xFFFF, 0xFFFF }, /* R1421 - AIF2 EQ Band 4 A */ - { 0xFFFF, 0xFFFF }, /* R1422 - AIF2 EQ Band 4 B */ - { 0xFFFF, 0xFFFF }, /* R1423 - AIF2 EQ Band 4 C */ - { 0xFFFF, 0xFFFF }, /* R1424 - AIF2 EQ Band 4 PG */ - { 0xFFFF, 0xFFFF }, /* R1425 - AIF2 EQ Band 5 A */ - { 0xFFFF, 0xFFFF }, /* R1426 - AIF2 EQ Band 5 B */ - { 0xFFFF, 0xFFFF }, /* R1427 - AIF2 EQ Band 5 PG */ - { 0x0000, 0x0000 }, /* R1428 */ - { 0x0000, 0x0000 }, /* R1429 */ - { 0x0000, 0x0000 }, /* R1430 */ - { 0x0000, 0x0000 }, /* R1431 */ - { 0x0000, 0x0000 }, /* R1432 */ - { 0x0000, 0x0000 }, /* R1433 */ - { 0x0000, 0x0000 }, /* R1434 */ - { 0x0000, 0x0000 }, /* R1435 */ - { 0x0000, 0x0000 }, /* R1436 */ - { 0x0000, 0x0000 }, /* R1437 */ - { 0x0000, 0x0000 }, /* R1438 */ - { 0x0000, 0x0000 }, /* R1439 */ - { 0x0000, 0x0000 }, /* R1440 */ - { 0x0000, 0x0000 }, /* R1441 */ - { 0x0000, 0x0000 }, /* R1442 */ - { 0x0000, 0x0000 }, /* R1443 */ - { 0x0000, 0x0000 }, /* R1444 */ - { 0x0000, 0x0000 }, /* R1445 */ - { 0x0000, 0x0000 }, /* R1446 */ - { 0x0000, 0x0000 }, /* R1447 */ - { 0x0000, 0x0000 }, /* R1448 */ - { 0x0000, 0x0000 }, /* R1449 */ - { 0x0000, 0x0000 }, /* R1450 */ - { 0x0000, 0x0000 }, /* R1451 */ - { 0x0000, 0x0000 }, /* R1452 */ - { 0x0000, 0x0000 }, /* R1453 */ - { 0x0000, 0x0000 }, /* R1454 */ - { 0x0000, 0x0000 }, /* R1455 */ - { 0x0000, 0x0000 }, /* R1456 */ - { 0x0000, 0x0000 }, /* R1457 */ - { 0x0000, 0x0000 }, /* R1458 */ - { 0x0000, 0x0000 }, /* R1459 */ - { 0x0000, 0x0000 }, /* R1460 */ - { 0x0000, 0x0000 }, /* R1461 */ - { 0x0000, 0x0000 }, /* R1462 */ - { 0x0000, 0x0000 }, /* R1463 */ - { 0x0000, 0x0000 }, /* R1464 */ - { 0x0000, 0x0000 }, /* R1465 */ - { 0x0000, 0x0000 }, /* R1466 */ - { 0x0000, 0x0000 }, /* R1467 */ - { 0x0000, 0x0000 }, /* R1468 */ - { 0x0000, 0x0000 }, /* R1469 */ - { 0x0000, 0x0000 }, /* R1470 */ - { 0x0000, 0x0000 }, /* R1471 */ - { 0x0000, 0x0000 }, /* R1472 */ - { 0x0000, 0x0000 }, /* R1473 */ - { 0x0000, 0x0000 }, /* R1474 */ - { 0x0000, 0x0000 }, /* R1475 */ - { 0x0000, 0x0000 }, /* R1476 */ - { 0x0000, 0x0000 }, /* R1477 */ - { 0x0000, 0x0000 }, /* R1478 */ - { 0x0000, 0x0000 }, /* R1479 */ - { 0x0000, 0x0000 }, /* R1480 */ - { 0x0000, 0x0000 }, /* R1481 */ - { 0x0000, 0x0000 }, /* R1482 */ - { 0x0000, 0x0000 }, /* R1483 */ - { 0x0000, 0x0000 }, /* R1484 */ - { 0x0000, 0x0000 }, /* R1485 */ - { 0x0000, 0x0000 }, /* R1486 */ - { 0x0000, 0x0000 }, /* R1487 */ - { 0x0000, 0x0000 }, /* R1488 */ - { 0x0000, 0x0000 }, /* R1489 */ - { 0x0000, 0x0000 }, /* R1490 */ - { 0x0000, 0x0000 }, /* R1491 */ - { 0x0000, 0x0000 }, /* R1492 */ - { 0x0000, 0x0000 }, /* R1493 */ - { 0x0000, 0x0000 }, /* R1494 */ - { 0x0000, 0x0000 }, /* R1495 */ - { 0x0000, 0x0000 }, /* R1496 */ - { 0x0000, 0x0000 }, /* R1497 */ - { 0x0000, 0x0000 }, /* R1498 */ - { 0x0000, 0x0000 }, /* R1499 */ - { 0x0000, 0x0000 }, /* R1500 */ - { 0x0000, 0x0000 }, /* R1501 */ - { 0x0000, 0x0000 }, /* R1502 */ - { 0x0000, 0x0000 }, /* R1503 */ - { 0x0000, 0x0000 }, /* R1504 */ - { 0x0000, 0x0000 }, /* R1505 */ - { 0x0000, 0x0000 }, /* R1506 */ - { 0x0000, 0x0000 }, /* R1507 */ - { 0x0000, 0x0000 }, /* R1508 */ - { 0x0000, 0x0000 }, /* R1509 */ - { 0x0000, 0x0000 }, /* R1510 */ - { 0x0000, 0x0000 }, /* R1511 */ - { 0x0000, 0x0000 }, /* R1512 */ - { 0x0000, 0x0000 }, /* R1513 */ - { 0x0000, 0x0000 }, /* R1514 */ - { 0x0000, 0x0000 }, /* R1515 */ - { 0x0000, 0x0000 }, /* R1516 */ - { 0x0000, 0x0000 }, /* R1517 */ - { 0x0000, 0x0000 }, /* R1518 */ - { 0x0000, 0x0000 }, /* R1519 */ - { 0x0000, 0x0000 }, /* R1520 */ - { 0x0000, 0x0000 }, /* R1521 */ - { 0x0000, 0x0000 }, /* R1522 */ - { 0x0000, 0x0000 }, /* R1523 */ - { 0x0000, 0x0000 }, /* R1524 */ - { 0x0000, 0x0000 }, /* R1525 */ - { 0x0000, 0x0000 }, /* R1526 */ - { 0x0000, 0x0000 }, /* R1527 */ - { 0x0000, 0x0000 }, /* R1528 */ - { 0x0000, 0x0000 }, /* R1529 */ - { 0x0000, 0x0000 }, /* R1530 */ - { 0x0000, 0x0000 }, /* R1531 */ - { 0x0000, 0x0000 }, /* R1532 */ - { 0x0000, 0x0000 }, /* R1533 */ - { 0x0000, 0x0000 }, /* R1534 */ - { 0x0000, 0x0000 }, /* R1535 */ - { 0x01EF, 0x01EF }, /* R1536 - DAC1 Mixer Volumes */ - { 0x0037, 0x0037 }, /* R1537 - DAC1 Left Mixer Routing */ - { 0x0037, 0x0037 }, /* R1538 - DAC1 Right Mixer Routing */ - { 0x01EF, 0x01EF }, /* R1539 - DAC2 Mixer Volumes */ - { 0x0037, 0x0037 }, /* R1540 - DAC2 Left Mixer Routing */ - { 0x0037, 0x0037 }, /* R1541 - DAC2 Right Mixer Routing */ - { 0x0003, 0x0003 }, /* R1542 - AIF1 ADC1 Left Mixer Routing */ - { 0x0003, 0x0003 }, /* R1543 - AIF1 ADC1 Right Mixer Routing */ - { 0x0003, 0x0003 }, /* R1544 - AIF1 ADC2 Left Mixer Routing */ - { 0x0003, 0x0003 }, /* R1545 - AIF1 ADC2 Right mixer Routing */ - { 0x0000, 0x0000 }, /* R1546 */ - { 0x0000, 0x0000 }, /* R1547 */ - { 0x0000, 0x0000 }, /* R1548 */ - { 0x0000, 0x0000 }, /* R1549 */ - { 0x0000, 0x0000 }, /* R1550 */ - { 0x0000, 0x0000 }, /* R1551 */ - { 0x02FF, 0x03FF }, /* R1552 - DAC1 Left Volume */ - { 0x02FF, 0x03FF }, /* R1553 - DAC1 Right Volume */ - { 0x02FF, 0x03FF }, /* R1554 - DAC2 Left Volume */ - { 0x02FF, 0x03FF }, /* R1555 - DAC2 Right Volume */ - { 0x0003, 0x0003 }, /* R1556 - DAC Softmute */ - { 0x0000, 0x0000 }, /* R1557 */ - { 0x0000, 0x0000 }, /* R1558 */ - { 0x0000, 0x0000 }, /* R1559 */ - { 0x0000, 0x0000 }, /* R1560 */ - { 0x0000, 0x0000 }, /* R1561 */ - { 0x0000, 0x0000 }, /* R1562 */ - { 0x0000, 0x0000 }, /* R1563 */ - { 0x0000, 0x0000 }, /* R1564 */ - { 0x0000, 0x0000 }, /* R1565 */ - { 0x0000, 0x0000 }, /* R1566 */ - { 0x0000, 0x0000 }, /* R1567 */ - { 0x0003, 0x0003 }, /* R1568 - Oversampling */ - { 0x03C3, 0x03C3 }, /* R1569 - Sidetone */ -}; - static int wm8994_readable(unsigned int reg) { switch (reg) { @@ -1704,9 +128,9 @@ static int wm8994_readable(unsigned int reg) break; } - if (reg >= ARRAY_SIZE(access_masks)) + if (reg >= WM8994_CACHE_SIZE) return 0; - return access_masks[reg].readable != 0; + return wm8994_access_masks[reg].readable != 0; } static int wm8994_volatile(unsigned int reg) @@ -3945,7 +2369,7 @@ static int wm8994_resume(struct snd_soc_codec *codec) break; } - if (!access_masks[i].writable) + if (!wm8994_access_masks[i].writable) continue; wm8994_reg_write(codec->control_data, i, reg_cache[i]); diff --git a/sound/soc/codecs/wm8994.h b/sound/soc/codecs/wm8994.h index 2b9efa2..455cae6 100644 --- a/sound/soc/codecs/wm8994.h +++ b/sound/soc/codecs/wm8994.h @@ -35,4 +35,13 @@ int wm8994_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, int wm8958_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, wm8958_micdet_cb cb, void *cb_data); +#define WM8994_CACHE_SIZE 1570 + +struct wm8994_access_mask { + unsigned short readable; /* Mask of readable bits */ + unsigned short writable; /* Mask of writable bits */ +}; + +extern const struct wm8994_access_mask wm8994_access_masks[WM8994_CACHE_SIZE]; + #endif -- 1.7.1

2 1

[alsa-devel] trigger_stop and buffer overrun
by Radivoje Jovanovic 18 Nov '10

18 Nov '10

Is there anu way to tell what is the last position in the buffer filled by ALSA during the trigger stop callback? The hardware I have is playing sound but if I turn the DMA off when trigger_stop is executed I will not hear the end of the file at all. It seems to me that I would have to setup the hardware to stop playing at the specific address. On the other hand if I play longer sounds or a song I notice that the song is skipping a lot and 1 minute sample is over in 20 seconds so it seems to me that the buffer is overflowing. the pointer callback reads correctly the current DMA position from the hardware so I am confused how the overflow happens. Is there any other way ALSA tracks the position where to write the data? cheers

1 0

[alsa-devel] [PATCH] ASoC: Add support for MAX98089 CODEC
by Jesse Marroquin 18 Nov '10

18 Nov '10

This patch adds initial support for the MAX98089 CODEC. Signed-off-by: Jesse Marroquin <jesse.marroquin(a)maxim-ic.com> --- sound/soc/codecs/max98088.c | 11 ++++++++++- 1 files changed, 10 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c index ef06007..9c32237 100644 --- a/sound/soc/codecs/max98088.c +++ b/sound/soc/codecs/max98088.c @@ -28,6 +28,11 @@ #include <sound/max98088.h> #include "max98088.h" +enum max98088_type { + MAX98088, + MAX98089, +}; + struct max98088_cdata { unsigned int rate; unsigned int fmt; @@ -36,6 +41,7 @@ struct max98088_cdata { struct max98088_priv { u8 reg_cache[M98088_REG_CNT]; + enum max98088_type devtype; void *control_data; struct max98088_pdata *pdata; unsigned int sysclk; @@ -2042,6 +2048,8 @@ static int max98088_i2c_probe(struct i2c_client *i2c, if (max98088 == NULL) return -ENOMEM; + max98088->devtype = id->driver_data; + i2c_set_clientdata(i2c, max98088); max98088->control_data = i2c; max98088->pdata = i2c->dev.platform_data; @@ -2061,7 +2069,8 @@ static int __devexit max98088_i2c_remove(struct i2c_client *client) } static const struct i2c_device_id max98088_i2c_id[] = { - { "max98088", 0 }, + { "max98088", MAX98088 }, + { "max98089", MAX98089 }, { } }; MODULE_DEVICE_TABLE(i2c, max98088_i2c_id); -- 1.5.6.5

3 2

[alsa-devel] [PATCH] disable period wakeups
by pl bossart 18 Nov '10

18 Nov '10

Here's the second set of patches based on feedback from Takashi, Jaroslav and Clemens. Hope this is fine now. How many patches does it take to flip a bit :-) ? -Pierre

3 5

[alsa-devel] snd_pcm_mmap_writei
by Irfan Shaikh 18 Nov '10

18 Nov '10

Hello All, Replacing snd_pcm_writei with snd_pcm__mmap_writei gives SEGFAULT in My code. Works fine with pcm.c. Can ANyone help me on FINDING OUT WHAT MAY BE CAUSE OF SEGFAULT ? Is any thing specific required for MMAP Write ???? /$$$ Works FINE $$$/ //while ((pcmreturn = snd_pcm_writei(alsaParams->pcm_handle, data, count)) < 0) // ===>>>>Replaced by below LINE /$$$ SEG FAULT$$$/ while ((pcmreturn = snd_pcm__mmap_writei(alsaParams->pcm_handle, data, count)) < 0) // REPLACED ABOVE NORMAL WRTIE WITH MMAP WRITE { /* * My code */ } Thanks in advance, Best Regards SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html

2 2

[alsa-devel] [PATCH] ASoC: add codec support for mini6410 and real6410 boards
by Paulius Zaleckas 18 Nov '10

18 Nov '10

Signed-off-by: Paulius Zaleckas <paulius.zaleckas(a)gmail.com> --- sound/soc/s3c24xx/Kconfig | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 8a6b53c..b1fcbd3 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -132,7 +132,7 @@ config SND_S3C24XX_SOC_RX1950_UDA1380 config SND_SOC_SMDK_WM9713 tristate "SoC AC97 Audio support for SMDK with WM9713" - depends on SND_S3C24XX_SOC && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) + depends on SND_S3C24XX_SOC && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_MINI6410 || MACH_REAL6410) select SND_SOC_WM9713 select SND_S3C_SOC_AC97 help

2 1

[alsa-devel] ASoC: Cyclic dependency between soc.h and soc-dapm.h
by Lars-Peter Clausen 17 Nov '10

17 Nov '10

The commit "ASoC: Decouple DAPM from CODECs" introduced a cyclic dependency between soc.h and soc-dapm.h which leads to the following compile error, if a driver includes soc-dapm.h without having included soc.h before: In file included from include/sound/soc-dapm.h:19, from sound/soc/codecs/jz4740.c:25: include/sound/soc.h:484: error: field 'dapm' has incomplete type If soc.h has been included before the error does not happen, but then soc-dapm.h already got included trough soc.h, so the driver does not really have to include it again. So I wonder if soc-dapm.h should be made completely internal and not be included anywhere else but soc.h anymore? Or if the cyclic dependency should be broken somehow, maybe by introducing a third header file? - Lars

2 1

[alsa-devel] [PATCH] ASoC: davinci: fixes for multi-component
by Chris Paulson-Ellis 17 Nov '10

17 Nov '10

Multi-component commit f0fba2ad broke a few things which this patch should fix. Tested on the DM355 EVM. I've been as careful as I can, but it would be good if those with access to other Davinci boards could test. -- The multi-component commit put the initialisation of snd_soc_dai.[capture|playback]_dma_data into snd_soc_dai_ops.hw_params of the McBSP, McASP & VCIF drivers (davinci-i2s.c, davinci-mcasp.c & davinci-vcif.c). The initialisation had to be moved from the probe function in these drivers because davinci_*_dai changed from snd_soc_dai to snd_soc_dai_driver. Unfortunately, the DMA params pointer is needed by davinci_pcm_open (in davinci-pcm.c) before hw_params is called. I have moved the initialisation to a new snd_soc_dai_ops.startup function in each of these drivers. This fix indicates that all platforms that use davinci-pcm must have been broken and need to test with this fix. -- The multi-component commit also changed the McBSP driver name from "davinci-asp" to "davinci-i2s" in davinci-i2s.c without updating the board level references to the driver name. This change is understandable, as there is a similarly named "davinci-mcasp" driver in davinci-mcasp.c. There is probably no 'correct' name for this driver. The DM6446 datasheet calls it the "ASP" and describes it as a "specialised McBSP". The DM355 datasheet calls it the "ASP" and describes it as a "specialised ASP". The DM365 datasheet calls it the "McBSP". Rather than fix this problem by reverting to "davinci-asp", I've elected to avoid future confusion with the "davinci-mcasp" driver by changing it to "davinci-mcbsp", which is also consistent with the names of the functions in the driver. There are other fixes required, so it was never going to be as simple as a revert anyway. -- The DM365 only has one McBSP port (of the McBSP platforms, only the DM355 has 2 ports), so I've changed the the id of the platform_device from 0 to -1. -- In davinci-evm.c, the DM6446 EVM can no longer share a snd_soc_dai_link structure with the DM355 EVM as they use different cpu DAI names (the DM355 has 2 ports and the EVM uses the second port, but the DM6446 only has 1 port). This also means that the 2 boards need different snd_soc_card structures. -- The codec_name entries in davinci-evm.c didn't match the i2c ids in the board files. I have only checked and fixed the details of the names used for the McBSP based platforms. Someone with a McASP based platform (eg DA8xx) should check the others. Signed-off-by: Chris Paulson-Ellis <chris(a)edesix.com> --- arch/arm/mach-davinci/dm355.c | 6 ++-- arch/arm/mach-davinci/dm365.c | 6 ++-- arch/arm/mach-davinci/dm644x.c | 4 +- sound/soc/davinci/davinci-evm.c | 40 ++++++++++++++++++++++++++--------- sound/soc/davinci/davinci-i2s.c | 15 +++++++++--- sound/soc/davinci/davinci-mcasp.c | 13 +++++++++-- sound/soc/davinci/davinci-sffsdr.c | 2 +- sound/soc/davinci/davinci-vcif.c | 13 +++++++++-- 8 files changed, 69 insertions(+), 30 deletions(-) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 9be261b..2652af1 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -359,8 +359,8 @@ static struct clk_lookup dm355_clks[] = { CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("davinci-asp.0", NULL, &asp0_clk), - CLK("davinci-asp.1", NULL, &asp1_clk), + CLK("davinci-mcbsp.0", NULL, &asp0_clk), + CLK("davinci-mcbsp.1", NULL, &asp1_clk), CLK("davinci_mmc.0", NULL, &mmcsd0_clk), CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK("spi_davinci.0", NULL, &spi0_clk), @@ -664,7 +664,7 @@ static struct resource dm355_asp1_resources[] = { }; static struct platform_device dm355_asp1_device = { - .name = "davinci-asp", + .name = "davinci-mcbsp", .id = 1, .num_resources = ARRAY_SIZE(dm355_asp1_resources), .resource = dm355_asp1_resources, diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index a12065e..c466d71 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -459,7 +459,7 @@ static struct clk_lookup dm365_clks[] = { CLK(NULL, "usb", &usb_clk), CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci_voicecodec", NULL, &voicecodec_clk), - CLK("davinci-asp.0", NULL, &asp0_clk), + CLK("davinci-mcbsp", NULL, &asp0_clk), CLK(NULL, "rto", &rto_clk), CLK(NULL, "mjcp", &mjcp_clk), CLK(NULL, NULL, NULL), @@ -922,8 +922,8 @@ static struct resource dm365_asp_resources[] = { }; static struct platform_device dm365_asp_device = { - .name = "davinci-asp", - .id = 0, + .name = "davinci-mcbsp", + .id = -1, .num_resources = ARRAY_SIZE(dm365_asp_resources), .resource = dm365_asp_resources, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 0608dd7..9a2376b 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -302,7 +302,7 @@ static struct clk_lookup dm644x_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("palm_bk3710", NULL, &ide_clk), - CLK("davinci-asp", NULL, &asp_clk), + CLK("davinci-mcbsp", NULL, &asp_clk), CLK("davinci_mmc.0", NULL, &mmcsd_clk), CLK(NULL, "spi", &spi_clk), CLK(NULL, "gpio", &gpio_clk), @@ -580,7 +580,7 @@ static struct resource dm644x_asp_resources[] = { }; static struct platform_device dm644x_asp_device = { - .name = "davinci-asp", + .name = "davinci-mcbsp", .id = -1, .num_resources = ARRAY_SIZE(dm644x_asp_resources), .resource = dm644x_asp_resources, diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index a2cf64b..fd96905 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -158,12 +158,23 @@ static int evm_aic3x_init(struct snd_soc_pcm_runtime *rtd) } /* davinci-evm digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link evm_dai = { +static struct snd_soc_dai_link dm6446_evm_dai = { .name = "TLV320AIC3X", .stream_name = "AIC3X", - .cpu_dai_name = "davinci-mcasp.0", + .cpu_dai_name = "davinci-mcbsp", .codec_dai_name = "tlv320aic3x-hifi", - .codec_name = "tlv320aic3x-codec.0-001a", + .codec_name = "tlv320aic3x-codec.1-001b", + .platform_name = "davinci-pcm-audio", + .init = evm_aic3x_init, + .ops = &evm_ops, +}; + +static struct snd_soc_dai_link dm355_evm_dai = { + .name = "TLV320AIC3X", + .stream_name = "AIC3X", + .cpu_dai_name = "davinci-mcbsp.1", + .codec_dai_name = "tlv320aic3x-hifi", + .codec_name = "tlv320aic3x-codec.1-001b", .platform_name = "davinci-pcm-audio", .init = evm_aic3x_init, .ops = &evm_ops, @@ -173,10 +184,10 @@ static struct snd_soc_dai_link dm365_evm_dai = { #ifdef CONFIG_SND_DM365_AIC3X_CODEC .name = "TLV320AIC3X", .stream_name = "AIC3X", - .cpu_dai_name = "davinci-i2s", + .cpu_dai_name = "davinci-mcbsp", .codec_dai_name = "tlv320aic3x-hifi", .init = evm_aic3x_init, - .codec_name = "tlv320aic3x-codec.0-001a", + .codec_name = "tlv320aic3x-codec.1-0018", .ops = &evm_ops, #elif defined(CONFIG_SND_DM365_VOICE_CODEC) .name = "Voice Codec - CQ93VC", @@ -220,10 +231,17 @@ static struct snd_soc_dai_link da8xx_evm_dai = { .ops = &evm_ops, }; -/* davinci dm6446, dm355 evm audio machine driver */ -static struct snd_soc_card snd_soc_card_evm = { - .name = "DaVinci EVM", - .dai_link = &evm_dai, +/* davinci dm6446 evm audio machine driver */ +static struct snd_soc_card dm6446_snd_soc_card_evm = { + .name = "DaVinci DM6446 EVM", + .dai_link = &dm6446_evm_dai, + .num_links = 1, +}; + +/* davinci dm355 evm audio machine driver */ +static struct snd_soc_card dm355_snd_soc_card_evm = { + .name = "DaVinci DM355 EVM", + .dai_link = &dm355_evm_dai, .num_links = 1, }; @@ -262,10 +280,10 @@ static int __init evm_init(void) int ret; if (machine_is_davinci_evm()) { - evm_snd_dev_data = &snd_soc_card_evm; + evm_snd_dev_data = &dm6446_snd_soc_card_evm; index = 0; } else if (machine_is_davinci_dm355_evm()) { - evm_snd_dev_data = &snd_soc_card_evm; + evm_snd_dev_data = &dm355_snd_soc_card_evm; index = 1; } else if (machine_is_davinci_dm365_evm()) { evm_snd_dev_data = &dm365_snd_soc_card_evm; diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c index d46b545..9e0e565 100644 --- a/sound/soc/davinci/davinci-i2s.c +++ b/sound/soc/davinci/davinci-i2s.c @@ -426,9 +426,6 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream, snd_pcm_format_t fmt; unsigned element_cnt = 1; - dai->capture_dma_data = dev->dma_params; - dai->playback_dma_data = dev->dma_params; - /* general line settings */ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG); if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { @@ -601,6 +598,15 @@ static int davinci_i2s_trigger(struct snd_pcm_substream *substream, int cmd, return ret; } +static int davinci_i2s_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct davinci_mcbsp_dev *dev = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_set_dma_data(dai, substream, dev->dma_params); + return 0; +} + static void davinci_i2s_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -612,6 +618,7 @@ static void davinci_i2s_shutdown(struct snd_pcm_substream *substream, #define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000 static struct snd_soc_dai_ops davinci_i2s_dai_ops = { + .startup = davinci_i2s_startup, .shutdown = davinci_i2s_shutdown, .prepare = davinci_i2s_prepare, .trigger = davinci_i2s_trigger, @@ -749,7 +756,7 @@ static struct platform_driver davinci_mcbsp_driver = { .probe = davinci_i2s_probe, .remove = davinci_i2s_remove, .driver = { - .name = "davinci-i2s", + .name = "davinci-mcbsp", .owner = THIS_MODULE, }, }; diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 86918ee..fb55d2c 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -715,9 +715,6 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream, int word_length; u8 fifo_level; - cpu_dai->capture_dma_data = dev->dma_params; - cpu_dai->playback_dma_data = dev->dma_params; - davinci_hw_common_param(dev, substream->stream); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) fifo_level = dev->txnumevt; @@ -799,7 +796,17 @@ static int davinci_mcasp_trigger(struct snd_pcm_substream *substream, return ret; } +static int davinci_mcasp_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct davinci_audio_dev *dev = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_set_dma_data(dai, substream, dev->dma_params); + return 0; +} + static struct snd_soc_dai_ops davinci_mcasp_dai_ops = { + .startup = davinci_mcasp_startup, .trigger = davinci_mcasp_trigger, .hw_params = davinci_mcasp_hw_params, .set_fmt = davinci_mcasp_set_dai_fmt, diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c index 009b652..6c6666a 100644 --- a/sound/soc/davinci/davinci-sffsdr.c +++ b/sound/soc/davinci/davinci-sffsdr.c @@ -84,7 +84,7 @@ static struct snd_soc_ops sffsdr_ops = { static struct snd_soc_dai_link sffsdr_dai = { .name = "PCM3008", /* Codec name */ .stream_name = "PCM3008 HiFi", - .cpu_dai_name = "davinci-asp.0", + .cpu_dai_name = "davinci-mcbsp", .codec_dai_name = "pcm3008-hifi", .codec_name = "pcm3008-codec", .platform_name = "davinci-pcm-audio", diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/davinci/davinci-vcif.c index ea232f6..fb4cc1e 100644 --- a/sound/soc/davinci/davinci-vcif.c +++ b/sound/soc/davinci/davinci-vcif.c @@ -97,9 +97,6 @@ static int davinci_vcif_hw_params(struct snd_pcm_substream *substream, &davinci_vcif_dev->dma_params[substream->stream]; u32 w; - dai->capture_dma_data = davinci_vcif_dev->dma_params; - dai->playback_dma_data = davinci_vcif_dev->dma_params; - /* Restart the codec before setup */ davinci_vcif_stop(substream); davinci_vcif_start(substream); @@ -174,9 +171,19 @@ static int davinci_vcif_trigger(struct snd_pcm_substream *substream, int cmd, return ret; } +static int davinci_vcif_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct davinci_vcif_dev *dev = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_set_dma_data(dai, substream, dev->dma_params); + return 0; +} + #define DAVINCI_VCIF_RATES SNDRV_PCM_RATE_8000_48000 static struct snd_soc_dai_ops davinci_vcif_dai_ops = { + .startup = davinci_vcif_startup, .trigger = davinci_vcif_trigger, .hw_params = davinci_vcif_hw_params, }; -- 1.7.2.3

3 2

[PATCH 3/3] ALSA: HDA: Add Front control for ALC887
by David Henningsson 17 Nov '10

17 Nov '10

HP and Line out share DAC, so we need a switch to turn line out off. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 10 +++++++++- 1 files changed, 9 insertions(+), 1 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4cc7bb2..86df37c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10836,8 +10836,16 @@ static int alc882_parse_auto_config(struct hda_codec *codec) err = alc880_auto_fill_dac_nids(spec, &spec->autocfg); if (err < 0) return err; - if (codec->vendor_id == 0x10ec0887) + if (codec->vendor_id == 0x10ec0887) { err = alc861vd_auto_create_multi_out_ctls(spec, &spec->autocfg); + if (err < 0) + return err; + /* We need something to switch that doesn't affect headphones */ + if (spec->autocfg.line_out_pins[0]) + err = add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, "Front", + HDA_COMPOSE_AMP_VAL(spec->autocfg.line_out_pins[0], 3, 0, HDA_OUTPUT)); + + } else err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg); if (err < 0) -- 1.7.1 --------------050400000103080707060807--

1 0

[alsa-devel] Sound card OpenSuse 11.3
by Luca Samiolo 17 Nov '10

17 Nov '10

Good morning, I'm Luca. I want to ask information: can I get a list of sound cards compatible with OpenSuse 10.3? Thank you Luca Samiolo IT Support & Help Desk luca.samiolo(a)nemes.it ------------------------------------------------------------------------------------------------------------------------------ The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.

2 1

[alsa-devel] [PATCH] ASoC: Fix register cache setup WM8994 for multi-component
by Mark Brown 16 Nov '10

16 Nov '10

During the multi-component conversion the WM8994 register cache init got lost. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 363b3ba..f598ca0 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -4342,6 +4342,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) return -ENOMEM; snd_soc_codec_set_drvdata(codec, wm8994); + codec->reg_cache = &wm8994->reg_cache; + wm8994->pdata = dev_get_platdata(codec->dev->parent); wm8994->codec = codec; -- 1.7.1

1 0

[alsa-devel] nvidia initial sound being skipped
by David Shirley 16 Nov '10

16 Nov '10

Hi Developers, I am using an nvidia MCP78 to connect to a Denon 1910 AVR via HDMI. I was using Kernel 2.6.32.21 and noticed that the initial few seconds of my songs was being chopped off. After seeing http://www.spinics.net/lists/alsa-devel/msg29408.html I upgraded to 2.6.35.8 (which has that fix in it) and the problem was been reduced considerably. But it is still occurring to some extent. So to see if the HDMI was the problem I changed it to coax spdif - no change/same problem. Now I think it could be mplayer, so I try audacious - no change/same problem. Now I think it could be the flac file/decoding, so I decode the flac to wav and use aplay - no change/same problem. The ONLY way I can get the first 0.5seconds of the file to play is by using audacious and then MANUALLY rewinding (by dragging the scroll bar thingy) back to the start... then it will play (on either flac or wav) Co-incidentally when I do this I get the following error message dumped to console: alsa: snd_pcm_prepare failed: Device or resource busy. I hope someone can help :) I am happy to get debug or whatever - just let me know what you need! mythtv@crystal:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 1: ALC1200 Digital [ALC1200 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 lspci -vvvv 00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1) Subsystem: ASUSTeK Computer Inc. M3N72-D Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel Cheers David

1 0

[alsa-devel] SEGFAULT : snd_pcm_mmap_begin/commit
by Irfan Shaikh 16 Nov '10

16 Nov '10

Hello All, I have been facing dificulty in using snd_pcm_mmap_begin and snd_pcm_mmap_commit. Shows Seg fault as pointed by comment in code below. Please tell me what wrong i am doing and how do i correct. /###################################################################################/ unsigned int count = (alsaParams->frames/(((alsaParams->bit_per_sample)*(alsaParams->num_channel)) / 8)); unsigned char *data = alsaParams->data;https://owa.sasken.com/owa/?ae=Item&t=IPM.Note&a=New# snd_pcm_sframes_t frames_available, frames_transmit; const snd_pcm_channel_area_t *area; snd_pcm_uframes_t offset; char *outbuffer; int result; /*available space in audio-buffer to write to*/ frames_available = snd_pcm_avail_update(alsaParams->pcm_handle); /* * prepare the areas * and get back area, offset and frames_transmit * frames_transmit gives back the REAL value of available frames which could be written to in the mmaped-area * frames_transmit are less than frames_available */ frames_transmit = frames_available; snd_pcm_mmap_begin(alsaParams->pcm_handle, &area, &offset, &frames_transmit); /*calculates the mmaped-buffer which could be written to*/ outbuffer = ((char *) area->addr + (area->first + area->step * offset)/ 8); // ****** SEGFAULT ******* /*gives back the virtually written (writable) frames which should be always == frames_transmit*/ result = snd_pcm_mmap_commit(alsaParams->pcm_handle, offset, frames_transmit); memcpy(outbuffer, data, count); //data is actual data I think if above code works fine should play sound. /###################################################################################/ SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html

2 2

[PATCH 2/3] ALSA: HDA: Rename "Front" to "Master Front" on ALC861VD and ALC887
by David Henningsson 16 Nov '10

16 Nov '10

Since "Front" controls headphones as well on these two codecs, they should be labeled "Master Front" in order to be handled correct by PulseAudio. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ce4017e..4cc7bb2 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -16966,7 +16966,7 @@ static void alc861vd_auto_init_analog_input(struct hda_codec *codec) static int alc861vd_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { - static const char *chname[4] = {"Front", "Surround", "CLFE", "Side"}; + static const char *chname[4] = {"Master Front", "Surround", "CLFE", "Side"}; hda_nid_t nid_v, nid_s; int i, err; -- 1.7.1 --------------040808030805090205070405--

1 0

[alsa-devel] Direct write (using mmap_bigin and commit)
by Irfan Shaikh 16 Nov '10

16 Nov '10

Hello, I am reading an raw PCM file and want to write on PCM device using direct write (interleaved). I have gone through PCM.c test application. I am trying tio write PCM audio data as follows. I am unable to use snd_pcm_mmap_begin and snd_pcm_mmap_commit properly. Please help me to use using these APIs Question : 1) How can i write to Ring buffer area (any pcm audio data)? //Any example or explanation other than pcm.c 2) Do i need to write diffferently for each channel as shown in pcm.c I am trying to do following but not succeded (reading pcm file and writing content on device) . ANy thing played on audio device would help me in understanding. snd_pcm_channel_area_t my_areas; snd_pcm_uframes_t offset, frames, size; snd_pcm_sframes_t avail, commitres; int result; char *buffer; while(1) { avail = snd_pcm_avail_update(handle); if(avail>=period_size) { size=periodsize while (size > 0) { frames = size; err = snd_pcm_mmap_begin(handle, &my_areas, &offset, &frames); mybuffer=(char *)malloc(frames*2); result = fread (mybuffer,1,(frames*2),pFile); my_areas.addr=mybuffer; // IS THIS CORRECT ? WILL THIS WORK ? How can i write my audio file data here in areas? commitres = snd_pcm_mmap_commit(handle, offset, frames); } } SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html

3 3

[alsa-devel] [PATCH] ALSA: AT73C213: Rectify misleading comments.
by Peter Rosin 15 Nov '10

15 Nov '10

The Atmel SSC can divide by even numbers, not only powers of two and the given values are binary, not hexadecimal. Signed-off-by: Peter Rosin <peda(a)axentia.se> --- sound/spi/at73c213.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) I'm working on a driver based on AT73C213 and have had to look up if the below nits were code problems or comment problems. The Atmel specs tells me that the comments are wrong and this patch fixes those comments. Cheers and thanks, Peter diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 1bc56b2..548e17a 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -155,7 +155,7 @@ static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip) if (max_tries < 1) max_tries = 1; - /* ssc_div must be a power of 2. */ + /* ssc_div must be even. */ ssc_div = (ssc_div + 1) & ~1UL; if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) { @@ -621,7 +621,7 @@ static int snd_at73c213_line_capture_volume_info( { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 2; - /* When inverted will give values 0x10001 => 0. */ + /* When inverted will give values 10001b => 0. */ uinfo->value.integer.min = 14; uinfo->value.integer.max = 31; @@ -634,7 +634,7 @@ static int snd_at73c213_aux_capture_volume_info( { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 1; - /* When inverted will give values 0x10001 => 0. */ + /* When inverted will give values 10001b => 0. */ uinfo->value.integer.min = 14; uinfo->value.integer.max = 31; -- 1.7.2.3

4 3

[alsa-devel] [PATCHv2] ASoC: Add optional name_prefix for codec kcontrol, widget and route names
by Jarkko Nikula 15 Nov '10

15 Nov '10

There is a need to prefix codec kcontrol, widget and internal route names in an ASoC machine that has multiple codecs with conflicting names. The name collision would occur when codec drivers try to registering kcontrols with the same name or when building audio paths. This patch introduces optional prefix_map into struct snd_soc_card. With it machine drivers can specify a unique name prefix to each codec that have conflicting names with anothers. Prefix to codec is matched with codec name. Following example illustrates a machine that has two same codec instances. Name collision from kcontrol registration is avoided by specifying a name prefix "foo" for the second codec. As the codec widget names are prefixed then second audio map for that codec shows a prefixed widget name. static const struct snd_soc_dapm_route map0[] = { {"Spk", NULL, "MONO"}, }; static const struct snd_soc_dapm_route map1[] = { {"Vibra", NULL, "foo MONO"}, }; static struct snd_soc_prefix_map codec_prefix[] = { { .dev_name = "codec.2", .name_prefix = "foo", }, }; static struct snd_soc_card card = { ... .prefix_map = codec_prefix, .num_prefixes = ARRAY_SIZE(codec_prefix), }; Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- This goes on top of "ASoC: Extend DAPM to handle cross-device paths" set: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-November/033583.h… Basically updated prefix_map to snd_soc_card idea in RFC_iv/iv: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-October/033240.ht… Now prefix is not tied to snd_soc_dai_link and registration of dailess codecs will come after this. Otherwise the same but codec_name in snd_soc_prefix_map changed to dev_name. --- include/sound/soc.h | 13 +++++++++++++ sound/soc/soc-core.c | 35 +++++++++++++++++++++++++++++++++-- sound/soc/soc-dapm.c | 34 ++++++++++++++++++++++++++++++++-- 3 files changed, 78 insertions(+), 4 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 8470059..346c59e 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -450,6 +450,7 @@ struct snd_soc_cache_ops { /* SoC Audio Codec device */ struct snd_soc_codec { const char *name; + const char *name_prefix; int id; struct device *dev; struct snd_soc_codec_driver *driver; @@ -577,6 +578,11 @@ struct snd_soc_dai_link { struct snd_soc_ops *ops; }; +struct snd_soc_prefix_map { + const char *dev_name; + const char *name_prefix; +}; + /* SoC card */ struct snd_soc_card { const char *name; @@ -611,6 +617,13 @@ struct snd_soc_card { struct snd_soc_pcm_runtime *rtd; int num_rtd; + /* + * optional map of kcontrol, widget and path name prefixes that are + * associated per device + */ + struct snd_soc_prefix_map *prefix_map; + int num_prefixes; + struct work_struct deferred_resume_work; /* lists of probed devices belonging to this card */ diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 3a16096..9c0b2c7 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1397,6 +1397,23 @@ static void soc_remove_dai_link(struct snd_soc_card *card, int num) } } +static void soc_set_name_prefix(struct snd_soc_card *card, + struct snd_soc_codec *codec) +{ + int i; + + if (card->prefix_map == NULL) + return; + + for (i = 0; i < card->num_prefixes; i++) { + struct snd_soc_prefix_map *map = &card->prefix_map[i]; + if (map->dev_name && !strcmp(codec->name, map->dev_name)) { + codec->name_prefix = map->name_prefix; + break; + } + } +} + static void rtd_release(struct device *dev) {} static int soc_probe_dai_link(struct snd_soc_card *card, int num) @@ -1406,6 +1423,7 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) struct snd_soc_codec *codec = rtd->codec; struct snd_soc_platform *platform = rtd->platform; struct snd_soc_dai *codec_dai = rtd->codec_dai, *cpu_dai = rtd->cpu_dai; + const char *temp; int ret; dev_dbg(card->dev, "probe %s dai link %d\n", card->name, num); @@ -1440,6 +1458,7 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) /* probe the CODEC */ if (!codec->probed) { codec->dapm.card = card; + soc_set_name_prefix(card, codec); if (codec->driver->probe) { ret = codec->driver->probe(codec); if (ret < 0) { @@ -1493,11 +1512,15 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) /* now that all clients have probed, initialise the DAI link */ if (dai_link->init) { + /* machine controls, routes and widgets are not prefixed */ + temp = rtd->codec->name_prefix; + rtd->codec->name_prefix = NULL; ret = dai_link->init(rtd); if (ret < 0) { printk(KERN_ERR "asoc: failed to init %s\n", dai_link->stream_name); return ret; } + rtd->codec->name_prefix = temp; } /* Make sure all DAPM widgets are instantiated */ @@ -2076,14 +2099,22 @@ int snd_soc_add_controls(struct snd_soc_codec *codec, const struct snd_kcontrol_new *controls, int num_controls) { struct snd_card *card = codec->card->snd_card; + char prefixed_name[44], *name; int err, i; for (i = 0; i < num_controls; i++) { const struct snd_kcontrol_new *control = &controls[i]; - err = snd_ctl_add(card, snd_soc_cnew(control, codec, NULL)); + if (codec->name_prefix) { + snprintf(prefixed_name, sizeof(prefixed_name), "%s %s", + codec->name_prefix, control->name); + name = prefixed_name; + } else { + name = control->name; + } + err = snd_ctl_add(card, snd_soc_cnew(control, codec, name)); if (err < 0) { dev_err(codec->dev, "%s: Failed to add %s: %d\n", - codec->name, control->name, err); + codec->name, name, err); return err; } } diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 1ec43f9..27e3f41 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1336,6 +1336,7 @@ static void dapm_free_widgets(struct snd_soc_dapm_context *dapm) kfree(p->long_name); kfree(p); } + kfree(w->name); kfree(w); } } @@ -1384,11 +1385,25 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm, struct snd_soc_dapm_path *path; struct snd_soc_dapm_widget *wsource = NULL, *wsink = NULL, *w; struct snd_soc_dapm_widget *wtsource = NULL, *wtsink = NULL; - const char *sink = route->sink; + const char *sink; const char *control = route->control; - const char *source = route->source; + const char *source; + char prefixed_sink[80]; + char prefixed_source[80]; int ret = 0; + if (dapm->codec->name_prefix) { + snprintf(prefixed_sink, sizeof(prefixed_sink), "%s %s", + dapm->codec->name_prefix, route->sink); + sink = prefixed_sink; + snprintf(prefixed_source, sizeof(prefixed_source), "%s %s", + dapm->codec->name_prefix, route->source); + source = prefixed_source; + } else { + sink = route->sink; + source = route->source; + } + /* * find src and dest widgets over all widgets but favor a widget from * current DAPM context @@ -2027,10 +2042,25 @@ int snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, const struct snd_soc_dapm_widget *widget) { struct snd_soc_dapm_widget *w; + size_t name_len; if ((w = dapm_cnew_widget(widget)) == NULL) return -ENOMEM; + name_len = strlen(widget->name) + 1; + if (dapm->codec->name_prefix) + name_len += 1 + strlen(dapm->codec->name_prefix); + w->name = kmalloc(name_len, GFP_KERNEL); + if (w->name == NULL) { + kfree(w); + return -ENOMEM; + } + if (dapm->codec->name_prefix) + snprintf(w->name, name_len, "%s %s", + dapm->codec->name_prefix, widget->name); + else + snprintf(w->name, name_len, "%s", widget->name); + dapm->n_widgets++; w->dapm = dapm; w->codec = dapm->codec; -- 1.7.2.3

2 2

[alsa-devel] ASoC: WM8804: fsi-wm8804
by Grzegorz Daniluk 15 Nov '10

15 Nov '10

Hi, I'm trying to use the wm8804 codec in my SH4-based system (Renesas SH7724 to be precise). I have used the latest kernel 2.6.37-rc1 where there is the codec driver for wm8804. However, I have to write my own fsi-wm8804.c (like e.g. fsi-da7210.c). My code attached below. After compiling it with the rest of the kernel sources or compiling as an external module my alsa still does not see any soundcards. However, by running i2cdetect I can see that the device is correctly taken by the codec driver so the problem is somewhere with my fsi-wm8804 probably. Could you take a look at this ? Did I miss something from new ASoC api so that this module could correctly talk with wm8804 codec driver ? Also (when compiled as modules) after loading and doing lsmod I could see that the wm8804 module is not used by fsi-wm8804 module (as it was when I was playing with wm8940 on previous kernel versions). best regards, Greg #include <linux/platform_device.h> #include <sound/sh_fsi.h> static int fsi_wm8804_init(struct snd_soc_codec *codec) { return 0; } static int fsi_wm8804_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *dai = rtd->codec_dai; printk("%s\n", __FUNCTION__); if(substream->stream == SNDRV_PCM_STREAM_CAPTURE) { snd_soc_dai_set_pll(dai, 0, 0, 12000000, 94310400); } else if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { snd_soc_dai_set_pll(dai, 0, 0, 12000000, 98304000); } snd_soc_dai_set_fmt(dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); return 0; } static struct snd_soc_ops fsi_wm8804_ops = { .hw_params = fsi_wm8804_hw_params, }; static struct snd_soc_dai_link fsi_wm8804_dai = { .name = "WM8804", .stream_name = "WM8804", .cpu_dai_name = "fsib-dai", /* FSI B */ .codec_dai_name = "wm8804-spdif", .platform_name = "sh_fsi.0", .codec_name = "wm8804.0-003a", /*0x3a is codec I2C addr*/ .init = fsi_wm8804_init, .ops = &fsi_wm8804_ops, }; static struct snd_soc_card fsi_soc_card = { .name = "FSI (WM8804)", .dai_link = &fsi_wm8804_dai, .num_links = 1, }; static struct platform_device *fsi_wm8804_snd_device; static int __init fsi_wm8804_sound_init(void) { int ret; printk("%s\n", __FUNCTION__); fsi_wm8804_snd_device = platform_device_alloc("soc-audio", FSI_PORT_B); if (!fsi_wm8804_snd_device) return -ENOMEM; platform_set_drvdata(fsi_wm8804_snd_device, &fsi_soc_card); ret = platform_device_add(fsi_wm8804_snd_device); if (ret) platform_device_put(fsi_wm8804_snd_device); return ret; } static void __exit fsi_wm8804_sound_exit(void) { printk("%s\n", __FUNCTION__); platform_device_unregister(fsi_wm8804_snd_device); } module_init(fsi_wm8804_sound_init); module_exit(fsi_wm8804_sound_exit); /* Module information */ MODULE_DESCRIPTION("ALSA SoC FSI WM8804"); MODULE_LICENSE("GPL")

2 7

[alsa-devel] [PATCH 2.6.37 1/2] ASoC: Fix dapm_seq_compare() for multi-component
by Mark Brown 15 Nov '10

15 Nov '10

Ensure that we keep all widget powerups in DAPM sequence by making the CODEC the last thing we compare on rather than the first thing. Also fix the fact that we're currently comparing the widget pointers rather than the CODEC pointers when we do the substraction so we won't get stable results. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/soc-dapm.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 8352430..bc2ec06 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -706,12 +706,12 @@ static int dapm_seq_compare(struct snd_soc_dapm_widget *a, struct snd_soc_dapm_widget *b, int sort[]) { - if (a->codec != b->codec) - return (unsigned long)a - (unsigned long)b; if (sort[a->id] != sort[b->id]) return sort[a->id] - sort[b->id]; if (a->reg != b->reg) return a->reg - b->reg; + if (a->codec != b->codec) + return (unsigned long)a->codec - (unsigned long)b->codec; return 0; } -- 1.7.1

3 5

[alsa-devel] [patch 1/1] Kirkwood/ASoC: Add support for OpenRD Ultimate
by Arnaud Patard 15 Nov '10

15 Nov '10

OpenRD Ultimate & Client are similar machines so enable OpenRD client sound support on Ultimate too Tested-by: Robas Teodor <teodor.robas(a)gmail.com> Signed-off-by: Arnaud Patard <arnaud.patard(a)rtp-net.org> Index: sound-2.6/arch/arm/mach-kirkwood/openrd-setup.c =================================================================== --- sound-2.6.orig/arch/arm/mach-kirkwood/openrd-setup.c 2010-11-12 17:58:41.000000000 +0100 +++ sound-2.6/arch/arm/mach-kirkwood/openrd-setup.c 2010-11-12 17:59:06.000000000 +0100 @@ -94,7 +94,7 @@ kirkwood_i2c_init(); - if (machine_is_openrd_client()) { + if (machine_is_openrd_client() || machine_is_openrd_ultimate()) { i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); Index: sound-2.6/sound/soc/kirkwood/kirkwood-openrd.c =================================================================== --- sound-2.6.orig/sound/soc/kirkwood/kirkwood-openrd.c 2010-11-12 17:59:17.000000000 +0100 +++ sound-2.6/sound/soc/kirkwood/kirkwood-openrd.c 2010-11-12 17:59:31.000000000 +0100 @@ -86,7 +86,7 @@ { int ret; - if (!machine_is_openrd_client()) + if (!machine_is_openrd_client() && !machine_is_openrd_ultimate()) return 0; openrd_client_snd_device = platform_device_alloc("soc-audio", -1); Index: sound-2.6/sound/soc/kirkwood/Kconfig =================================================================== --- sound-2.6.orig/sound/soc/kirkwood/Kconfig 2010-11-12 17:59:51.000000000 +0100 +++ sound-2.6/sound/soc/kirkwood/Kconfig 2010-11-12 18:00:27.000000000 +0100 @@ -11,7 +11,7 @@ config SND_KIRKWOOD_SOC_OPENRD tristate "SoC Audio support for Kirkwood Openrd Client" - depends on SND_KIRKWOOD_SOC && MACH_OPENRD_CLIENT + depends on SND_KIRKWOOD_SOC && (MACH_OPENRD_CLIENT || MACH_OPENRD_ULTIMATE) select SND_KIRKWOOD_SOC_I2S select SND_SOC_CS42L51 help

3 2

[alsa-devel] [PATCH] ASoC: Prevent system suspend while debouncing wakeup capable GPIO jacks
by Mark Brown 15 Nov '10

15 Nov '10

If the device associated with a GPIO jack is wakeup capable then disable suspend while we're debouncing the jack so that we skip suspends that race with the jack. Note that currently the GPIO based jack has a CODEC associated with it which we're using right now. These jacks should be reparented against the card itself and this code adjusted. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/soc-jack.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index 4d95abb..619061d 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -209,6 +209,10 @@ static void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio) static irqreturn_t gpio_handler(int irq, void *data) { struct snd_soc_jack_gpio *gpio = data; + struct device *dev = gpio->jack->codec->card->dev; + + if (device_may_wakeup(dev)) + pm_wakeup_event(dev, gpio->debounce_time + 50); schedule_delayed_work(&gpio->work, msecs_to_jiffies(gpio->debounce_time)); -- 1.7.2.3

2 1

[alsa-devel] snd-soc - platform_device_add failed
by Vaclav Peroutka 13 Nov '10

13 Nov '10

Hello, I am trying to create alsa driver for MAX9880 which is connected to S3C6410. I "copied" the initialization code from other examples in sound/soc/ but during initialization I am getting "platform_device_add failed". I attached the code for kernel 2.6.29, ALSA 1.0.18a. For me it does not have anything which can fail. But I never wrote drivers for ALSA. I have another question. In the kernel code sound/soc/s3c_64xx/, there is a plenty of s3c_i2s files. Different versions but no description, which version should I use. Does anybody know, which one is the right version ? Thank you in advance, Vaclav

1 0

[alsa-devel] ALSA-SOC support for OpenRD Client/Ultimate
by Robas, Teodor 13 Nov '10

13 Nov '10

Hello everyone, I am writing to this list in the hope that somebody can clear me out if this platform is supported and I am doing something wrong, or if it is still work in progress. The drivers that I think should work with my hardware (OpenRD ultimate) are located in sound/soc/kirkwood/*. Sound on this device worked (partially) with the default software it came but not with the latest about 10 kernels I have tried. I added bellow the output of alsa-info.sh script. If needed I can look for more or try to fix it (with some help). Best Regards, Teodor !!################################ !!ALSA Information Script v 0.4.59 !!################################ !!Script ran on: Thu Nov 11 06:27:39 UTC 2010 !!Linux Distribution !!------------------ Debian GNU/Linux squeeze/sid \n \l !!DMI Information !!--------------- Manufacturer: Product Name: !!Kernel Information !!------------------ Kernel release: 2.6.37-rc1 Operating System: GNU/Linux Architecture: armv5tel Processor: unknown SMP Enabled: No !!ALSA Version !!------------ Driver version: 1.0.23 Library version: 1.0.23 Utilities version: 1.0.23 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- --- no soundcards --- !!PCI Soundcards installed in the system !!-------------------------------------- !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-pcsp: index=-2 snd-usb-audio: index=-2 !!Loaded sound module options !!-------------------------- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 33 Nov 11 08:23 /dev/snd/timer !!Aplay/Arecord output !!------------ APLAY aplay: device_list:235: no soundcards found... ARECORD arecord: device_list:235: no soundcards found... !!Amixer output !!------------- !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module snd_soc_kirkwood snd_soc_core snd_pcm snd_timer snd snd_page_alloc bridge stp llc nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs loop xgifb fb cfbcopyarea mv_cesa cfbimgblt aes_generic cfbfillrect sd_mod crc_t10dif usb_storage sata_mv libata ehci_hcd scsi_mod usbcore mv643xx_eth libphy nls_base !!ALSA/HDA dmesg !!------------------ PS: please note that none of the snd* modules are loaded by default. PPS: Somewhere in the code (sound/soc/kirkwood/kirkwood-openrd.c) there is a check: machine_is_openrd_client() but in my case it should be machine_is_openrd_ultimate(). I removed this check anyway. -- _ ( ) ascii ribbon campaign - against html e-mail X www.asciiribbon.org - against proprietary attachments / \

3 5

[alsa-devel] wrong channel mappings for HDMI audio
by Dan Christensen 13 Nov '10

13 Nov '10

[System specs at end.] When I try to use 5.1 audio over HDMI, the front left and front right channels are correct, but the others are wrong: - surround (rear) left and center are swapped - surround (rear) right and LFE are swapped This has been tested using "speaker-test -c6 -Dhw:0,3 -twav" and also by playing http://www.avenard.org/files/media/videotest/audiotest/idch_AviaSurroundTes… http://www.avenard.org/files/media/videotest/audiotest/idch_AviaSurroundTes… using mplayer and mythtv. They play correctly with digital passthrough: AAC and DTS for mythtv, and DTS for mplayer. Jean-Yves Avenard reports that they play correctly using 5.1 analog output on the same motherboard, but I haven't tested that myself. Let me know if this would be helpful, e.g. if it is hard to believe that analog has the correct mapping while HDMI doesn't. James Courtier-Dutton suggested that I report this here, in the hopes that ALSA can be taught the correct mapping for my sound card. I'm also interested in the best way to work around this in the meantime. Thanks for any help! Dan System specs: Motherboard: Gigabyte GA-E7AUM-DS2H http://gigabyte.com/products/product-page.aspx?pid=2946#ov Up-to-date Debian squeeze with 2.6.32-5-686-bigmem kernel. ALSA packages installed: alsa-base 1.0.23+dfsg-2 ALSA driver configuration files alsa-oss 1.0.17-4 ALSA wrapper for OSS applications alsa-source 1.0.23+dfsg-2 ALSA driver sources alsa-utils 1.0.23-3 Utilities for configuring and using ALSA alsaplayer-alsa 0.99.80-5+b1 PCM player designed for ALSA (ALSA output module) alsaplayer-common 0.99.80-5+b1 PCM player designed for ALSA (common files) alsaplayer-oss 0.99.80-5+b1 PCM player designed for ALSA (OSS output module) alsaplayer-text 0.99.80-5+b1 PCM player designed for ALSA (text version) libasound2 1.0.23-2.1 shared library for ALSA applications linux-sound-base 1.0.23+dfsg-2 base package for ALSA and OSS sound systems xmms2-plugin-alsa 0.7DrNo+dfsg-2 XMMS2 - ALSA output Pioneer VSX-820-K receiver, which has 5 speakers connected (no subwoofer), receiving input over HDMI. asound.conf: pcm.!default { type hw card 0 device 3 } lspci -vv output: 00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) Subsystem: Giga-byte Technology Device a102 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at d9180000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel [To save you scrolling: there's nothing else after the /proc output.] Output of cat /proc/asound/card0/codec#3 [below is #0 in case it helps]: Codec: Nvidia MCP7A HDMI Address: 3 Function Id: 0x1 Vendor Id: 0x10de0007 Subsystem Id: 0x10de0101 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x18560110: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560121: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x06 Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560122: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x2 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x08 Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560123: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x3 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0a Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560124: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x4 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0c Output of cat /proc/asound/card0/codec#0: Codec: Realtek ALC889A Address: 0 Function Id: 0x1 Vendor Id: 0x10ec0885 Subsystem Id: 0x1458a002 Revision Id: 0x100101 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x05 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled GenLevel Digital category: 0x2 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x1c 0x1c] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x24 Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Unsolicited: tag=00, enabled=0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x00] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x05 0x0b Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01014410: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01011412: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000003c: IN OUT HP Detect Pin Default 0x01016411: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e* 0x0f 0x26 Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000003c: IN OUT HP Detect Pin Default 0x01012414: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0x4 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e 0x0f* 0x26 Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19c40: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19c50: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x5, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x0181344f: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x4, Sequence = 0xf Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02214c20: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x593301f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x00000020: IN Pin Default 0x4005e601: [N/A] Line Out at Ext N/A Conn = Optical, Color = White DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x00000010: OUT Pin Default 0x014b6130: [Jack] SPDIF Out at Ext Rear Conn = Comb, Color = Orange DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital Pincap 0x00000020: IN Pin Default 0x01cb7160: [Jack] SPDIF In at Ext Rear Conn = Comb, Color = Yellow DefAssociation = 0x6, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=17 Processing Coefficient: 0xc128 Coefficient Index: 0x02 Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono Volume-Knob: delta=0, steps=32, direct=0, val=0 Unsolicited: tag=00, enabled=0 Connection: 0 Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x25 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Connection: 2 0x25 0x0b

3 5

[alsa-devel] [PATCH v8 3/9] davinci: ASoC support for Omapl138-Hawkboard
by vm.rod25＠gmail.com 13 Nov '10

13 Nov '10

From: Victor Rodriguez <victor.rodriguez(a)sasken.com> This patch adds ASoC support for the Hawkboard-L138 system Signed-off-by: Victor Rodriguez <victor.rodriguez(a)sasken.com> Acked-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg(a)slimlogic.co.uk> Tested-by: Rene Gonzalez <renegs.2378(a)gmail.com> --- sound/soc/davinci/Kconfig | 5 +++-- sound/soc/davinci/davinci-evm.c | 6 ++++-- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig index 6bbf001..72c6752 100644 --- a/sound/soc/davinci/Kconfig +++ b/sound/soc/davinci/Kconfig @@ -76,8 +76,9 @@ config SND_DA830_SOC_EVM DA830/OMAP-L137 EVM config SND_DA850_SOC_EVM - tristate "SoC Audio support for DA850/OMAP-L138 EVM" - depends on SND_DAVINCI_SOC && MACH_DAVINCI_DA850_EVM + tristate "SoC Audio support for DA850/OMAP-L138 EVM/Hawkboard" + depends on SND_DAVINCI_SOC && (MACH_DAVINCI_DA850_EVM || \ + MACH_OMAPL138_HAWKBOARD) select SND_DAVINCI_SOC_MCASP select SND_SOC_TLV320AIC3X help diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 97f74d6..73093eb 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -59,7 +59,8 @@ static int evm_hw_params(struct snd_pcm_substream *substream, sysclk = 12288000; else if (machine_is_davinci_da830_evm() || - machine_is_davinci_da850_evm()) + machine_is_davinci_da850_evm() || + machine_is_omapl138_hawkboard()) sysclk = 24576000; else @@ -311,7 +312,8 @@ static int __init evm_init(void) } else if (machine_is_davinci_da830_evm()) { evm_snd_dev_data = &da830_evm_snd_devdata; index = 1; - } else if (machine_is_davinci_da850_evm()) { + } else if (machine_is_davinci_da850_evm() || + machine_is_omapl138_hawkboard()) { evm_snd_dev_data = &da850_evm_snd_devdata; index = 0; } else -- 1.7.0.4

1 0

[alsa-devel] ALSA UCM
by abraham duenas 12 Nov '10

12 Nov '10

Hello, I recently cloned: git clone git://git.alsa-project.org/alsa-lib.git alsa-lib git clone git://git.alsa-project.org/alsa-utils.git alsa-utils and switched to the "ucm" branch to give it try. I have a panda board (pandaboard.org it is just a TI OMAP4 platform). I created some configuration files for my card. My conf file is 'SDP4430.conf' and my verb is on 'hifi'. I came with a simple program to set my verb and configure it for a simple device. I'm calling this sequence: 1. open it.... snd_use_case_mgr_open(&uc_mgr,"SDP4430") 2. reset it ....snd_use_case_mgr_reset(uc_mgr) 3. query for my verb.... snd_use_case_get_list(uc_mgr,"_verbs",&mylist) 4. set my verb ... snd_use_case_set(uc_mgr,"_verb",*mylist) 5. set my created device... snd_use_case_set(uc_mgr,"_enadev","Headset.0") 6. close it... snd_use_case_mgr_close(uc_mgr) Seems to work ok (without any errors) but I can't see any of my amixer controls set/changed accordingly to my verb/device. Is this a right sequence to follow? may be my files are not well written? Thanks for your help! Abraham

4 17

Re: [alsa-devel] [PATCH v7 3/9] davinci: ASoC support for Omapl138-Hawkboard
by Kevin Hilman 12 Nov '10

12 Nov '10

<vm.rod25(a)gmail.com> writes: > From: Victor Rodriguez <victor.rodriguez(a)sasken.com> > > This patch adds ASoC support for the Hawkboard-L138 system > > Signed-off-by: Victor Rodriguez <victor.rodriguez(a)sasken.com> I believe Mark Brown ack'd and earlier version of this patch. When you repost the series, you should collect any acks, sign-offs, tested-by etc. tags that others have reported. Mark, I assume you're OK with me merging this ASoC change via the davinci tree? Kevin > --- > sound/soc/davinci/Kconfig | 5 +++-- > sound/soc/davinci/davinci-evm.c | 6 ++++-- > 2 files changed, 7 insertions(+), 4 deletions(-) > > diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig > index 6bbf001..72c6752 100644 > --- a/sound/soc/davinci/Kconfig > +++ b/sound/soc/davinci/Kconfig > @@ -76,8 +76,9 @@ config SND_DA830_SOC_EVM > DA830/OMAP-L137 EVM > > config SND_DA850_SOC_EVM > - tristate "SoC Audio support for DA850/OMAP-L138 EVM" > - depends on SND_DAVINCI_SOC && MACH_DAVINCI_DA850_EVM > + tristate "SoC Audio support for DA850/OMAP-L138 EVM/Hawkboard" > + depends on SND_DAVINCI_SOC && (MACH_DAVINCI_DA850_EVM || \ > + MACH_OMAPL138_HAWKBOARD) > select SND_DAVINCI_SOC_MCASP > select SND_SOC_TLV320AIC3X > help > diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c > index 97f74d6..73093eb 100644 > --- a/sound/soc/davinci/davinci-evm.c > +++ b/sound/soc/davinci/davinci-evm.c > @@ -59,7 +59,8 @@ static int evm_hw_params(struct snd_pcm_substream *substream, > sysclk = 12288000; > > else if (machine_is_davinci_da830_evm() || > - machine_is_davinci_da850_evm()) > + machine_is_davinci_da850_evm() || > + machine_is_omapl138_hawkboard()) > sysclk = 24576000; > > else > @@ -311,7 +312,8 @@ static int __init evm_init(void) > } else if (machine_is_davinci_da830_evm()) { > evm_snd_dev_data = &da830_evm_snd_devdata; > index = 1; > - } else if (machine_is_davinci_da850_evm()) { > + } else if (machine_is_davinci_da850_evm() || > + machine_is_omapl138_hawkboard()) { > evm_snd_dev_data = &da850_evm_snd_devdata; > index = 0; > } else

3 3

[alsa-devel] [PATCHv2 0/3] ASoC: Extend DAPM to handle cross-device paths
by Jarkko Nikula 12 Nov '10

12 Nov '10

Hi Here's updated version of previous RFC_ii/iv set: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-October/033196.ht… Patches 1-2 have no remarkable changes, just modified on top of recent changes. Patch 3 is simpler as it turns out that the dapm_seq_run_coalesced doesn't need any changes because it's enough to call it with a right DAPM context. One fix is in beginning of dapm_power_widgets that d->dev_power is zeroed only for those codecs that have widgets in order to avoid unnecessary widgetless codec bias shutdowns. Minor changes are dapm.sys_power renaming to dev_power and long lines are cut. -- Jarkko

2 13

[alsa-devel] [PATCH] Acer 7730G support update.
by Denis Kup 12 Nov '10

12 Nov '10

Hello! I want to commit patch that fix no-sound on acer 7730G laptop. All work history you can see here https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5123 . This patch for the latest snapshot, where this changes have been made: http://www.kerneltrap.com/mailarchive/git-commits-head/2010/5/20/35023 . Acer 7730G support patch. Changes: 1) Fixes automatic EAPD configuration on Acer 7730G laptop. Denis Kuplyakov <dener.kup(a)gmail.com> 8.11.10 00:00:50

1 0

[alsa-devel] ALSA error : frame 0 active: -75
by Rajul Kumar 12 Nov '10

12 Nov '10

Hi , we are doing audio streaming using linux usb audio class interface . sometimes when we start usb audio streaming , we get first this error : ALSA sound/usb/usbaudio.c:354: frame 0 active: -75 which is followed by coninous loop of below messages : ALSA sound/usb/usbaudio.c:354: frame 0 active: -71 ALSA sound/usb/usbaudio.c:354: frame 0 active: -71 ALSA sound/usb/usbaudio.c:354: frame 0 active: -71 ALSA sound/usb/usbaudio.c:354: frame 0 active: -18 ALSA sound/usb/usbaudio.c:354: frame 0 active: -18 ALSA sound/usb/usbaudio.c:354: frame 0 active: -18 ...... and so on can i be suggested regarding the significance of error : -75 , and the way to resolve this error . Thanx & Regards Rajul

3 5

[alsa-devel] How to show error message
by s n 12 Nov '10

12 Nov '10

Hello all, How to show an error message in alsamixer (gnome and non-gnome) version? thanks,

2 1

Re: [alsa-devel] [PATCH] ASoC: Add MAX98089 CODEC driver
by Mark Brown 12 Nov '10

12 Nov '10

On Thu, Nov 11, 2010 at 02:21:07PM -0600, Jesse Marroquin wrote: > This patch adds the initial driver for the MAX98089 CODEC. I've not read this properly yet but on a first quick scan through this bears a more than passing resemblance to the MAX98088 driver - are there sufficient incompatibilities between the chips to warrant having a separate driver? http://datasheets.maxim-ic.com/en/ds/MAX98088.pdf would suggest not... Keeping a single driver means less code to maintain, which is generally a win. Variations between the parts can be accommodated by registering different controls and so on based on the I2C device ID that the system registers.

2 1

[alsa-devel] [PATCH] ASoC: Reset WM8962 with default ID value
by Mark Brown 11 Nov '10

11 Nov '10

The value makes no odds and it makes life easier with caches. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8962.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 8098610..e021866 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -1958,7 +1958,7 @@ static int wm8962_readable_register(unsigned int reg) static int wm8962_reset(struct snd_soc_codec *codec) { - return snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0); + return snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243); } static const DECLARE_TLV_DB_SCALE(inpga_tlv, -2325, 75, 0); -- 1.7.1

2 1

[alsa-devel] [PATCH v2 0/3] ASoC: Introduce the new caching API
by Dimitris Papastamos 11 Nov '10

11 Nov '10

This patch series introduces the new caching API. The idea behind this caching interface is that we can provide different means of organizing and accessing the register cache. This is useful for large and sparse register maps, where one can use some kind of compression algorithm to reduce the memory footprint. The caching API is designed in such way to eliminate the need for modifying any existing drivers. TODO: - Memory usage statistics, to make it easier to select the proper caching technique. - Support for bulk reads/writes. - Overridable caching behaviour from the machine driver. - Optimize certain CPU intensive paths. - Ensure proper locking in init()/exit()/sync(). Dimitris Papastamos (3): ASoC: soc-cache: Add support for flat register caching ASoC: soc-cache: Add support for LZO register caching ASoC: soc-cache: Add support for rbtree based register caching include/sound/soc.h | 29 ++ sound/soc/Kconfig | 2 + sound/soc/soc-cache.c | 984 +++++++++++++++++++++++++++++++++++++++++++++++-- sound/soc/soc-core.c | 37 +-- 4 files changed, 998 insertions(+), 54 deletions(-) -- 1.7.3.2

3 6

[PATCH] ALSA: HDA: Remove unconnected PCM devices for Intel HDMI
by David Henningsson 11 Nov '10

11 Nov '10

Some newer chips have more than one HDMI output, but usually not all of them are exposed as physical jacks. Removing the unused PCM devices (as indicated by BIOS in the pin config default) will reduce user confusion as they currently have to choose between several HDMI devices, some of them not working anyway. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- hda/patch_hdmi.c | 37 ++++++++++++++++++++++++++++--------- 1 files changed, 28 insertions(+), 9 deletions(-) diff --git a/hda/patch_hdmi.c b/hda/patch_hdmi.c index d3e49aa..6d964f4 100644 --- a/hda/patch_hdmi.c +++ b/hda/patch_hdmi.c @@ -905,22 +905,22 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) spec->pin[spec->num_pins] = pin_nid; spec->num_pins++; - /* - * It is assumed that converter nodes come first in the node list and - * hence have been registered and usable now. - */ return hdmi_read_pin_conn(codec, pin_nid); } static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t nid) { + int i; struct hdmi_spec *spec = codec->spec; - if (spec->num_cvts >= MAX_HDMI_CVTS) { - snd_printk(KERN_WARNING - "HDMI: no space for converter %d\n", nid); + for (i = 0; spec->pin_cvt[i] != nid; i++) + if (!spec->pin[i]) { + snd_printd("HDMI: Skipping node %d (no connection)\n", nid); + return -EINVAL; + } + + if (snd_BUG_ON(spec->num_cvts >= MAX_HDMI_CVTS)) return -E2BIG; - } spec->cvt[spec->num_cvts] = nid; spec->num_cvts++; @@ -932,6 +932,8 @@ static int hdmi_parse_codec(struct hda_codec *codec) { hda_nid_t nid; int i, nodes; + int num_tmp_cvts = 0; + hda_nid_t tmp_cvt[MAX_HDMI_CVTS]; nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid); if (!nid || nodes < 0) { @@ -942,6 +944,7 @@ static int hdmi_parse_codec(struct hda_codec *codec) for (i = 0; i < nodes; i++, nid++) { unsigned int caps; unsigned int type; + unsigned int config; caps = snd_hda_param_read(codec, nid, AC_PAR_AUDIO_WIDGET_CAP); type = get_wcaps_type(caps); @@ -951,17 +954,33 @@ static int hdmi_parse_codec(struct hda_codec *codec) switch (type) { case AC_WID_AUD_OUT: - hdmi_add_cvt(codec, nid); + if (num_tmp_cvts >= MAX_HDMI_CVTS) { + snd_printk(KERN_WARNING + "HDMI: no space for converter %d\n", nid); + continue; + } + tmp_cvt[num_tmp_cvts] = nid; + num_tmp_cvts++; break; case AC_WID_PIN: caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP); if (!(caps & (AC_PINCAP_HDMI | AC_PINCAP_DP))) continue; + + config = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_CONFIG_DEFAULT, 0); + if (((config & AC_DEFCFG_PORT_CONN) >> + AC_DEFCFG_PORT_CONN_SHIFT) == AC_JACK_PORT_NONE) + continue; + hdmi_add_pin(codec, nid); break; } } + for (i = 0; i < num_tmp_cvts; i++) + hdmi_add_cvt(codec, tmp_cvt[i]); + /* * G45/IbexPeak don't support EPSS: the unsolicited pin hot plug event * can be lost and presence sense verb will become inaccurate if the -- 1.7.1 --------------060402030308080303040300--

1 0

[alsa-devel] [PATCH] Fix Atmel soc audio boards Kconfig dependency
by Ryan Mallon 11 Nov '10

11 Nov '10

Add Kconfig dependency on AT91_PROGRAMMABLE_CLOCKS for the Atmel SoC audio SAM9G20-EK and PlayPaq boards. Fixes link errors on missing clk_set_parent and clk_set_rate when building without AT91_PROGRAMMABLE_CLOCKS. Signed-off-by: Ryan Mallon <ryan(a)bluewatersys.com> --- diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index e720d5e..bee3c94 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -16,7 +16,8 @@ config SND_ATMEL_SOC_SSC config SND_AT91_SOC_SAM9G20_WM8731 tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" - depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC + depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC && \ + AT91_PROGRAMMABLE_CLOCKS select SND_ATMEL_SOC_SSC select SND_SOC_WM8731 help @@ -25,7 +26,7 @@ config SND_AT91_SOC_SAM9G20_WM8731 config SND_AT32_SOC_PLAYPAQ tristate "SoC Audio support for PlayPaq with WM8510" - depends on SND_ATMEL_SOC && BOARD_PLAYPAQ + depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS select SND_ATMEL_SOC_SSC select SND_SOC_WM8510 help

4 5

[alsa-devel] ALSA buffer query
by Irfan Shaikh 11 Nov '10

11 Nov '10

Hello All, 1) My understanding : snd_pcm_writei() takes the allocated buffer from applications and passes the buffer beneath to the ASLA library and then to the ALSA driver for rendering Audio. 2) Query 1 : Instead of me allocating the buffer in ALSA application and passing the pointer in snd_pcm_writei, Can ALSA allocate the buffer and give to my application, so that i can copy my data into it. 3) Query 2 : Is there any wayto diirectly get hardware ALSA buffer from the ALSA driver to application so that i can copy PCM data to this buffer directly. If not, is there any way can we do this ? Thanks in Advance ! Regards Irfan SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html

2 3

[alsa-devel] Different returns from snd_pcm_readi() in differen versions from ALSA driver
by PgmHelmi 11 Nov '10

11 Nov '10

Hi! We had to write a driver for audio playing and recording on Linux thin clients. We are using ALSA driver + libs for it, but we are depending on the versions which are installed on them. We have a certain buffer size for this and set the corresponding hardware and software parameters and call for capture snd_pcm_readi(). The function returns the read buffer frames. In most versions this is equal to the number of wanted passed frames, but not in all. We have ALSA driver version 1.0.15 and 1.0.22.1 where the returned number is the same. But we have also version 1.0.21 where the returned number is the period size or a multiple of it. So conclusion is, that something was changed between 1.0.15 and 1.0.21 and changed back till 1.0.22.1. As we are dependent on the behaviour of the former and newer version, my question is, if there is a possibility to get the same behaviour in version 1.0.21? Thank you for your answer in advance!

1 1

[alsa-devel] [PATCH 1/2] ASoC: Add trace events for ASoC register read/write
by Mark Brown 10 Nov '10

10 Nov '10

The trace subsystem provides a convenient way of instrumenting the kernel which can be left on all the time with extremely low impact on the system unlike prints to the kernel log which can be very spammy. Begin adding support for instrumenting ASoC via this interface by adding trace for the register access primitives. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- include/trace/events/asoc.h | 64 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/soc-core.c | 5 +++ 2 files changed, 69 insertions(+), 0 deletions(-) create mode 100644 include/trace/events/asoc.h diff --git a/include/trace/events/asoc.h b/include/trace/events/asoc.h new file mode 100644 index 0000000..93c3371 --- /dev/null +++ b/include/trace/events/asoc.h @@ -0,0 +1,64 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM asoc + +#if !defined(_TRACE_ASOC_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_ASOC_H + +#include <linux/ktime.h> +#include <linux/tracepoint.h> + +struct snd_soc_codec; + +/* + * Log register events + */ +DECLARE_EVENT_CLASS(snd_soc_reg, + + TP_PROTO(struct snd_soc_codec *codec, unsigned int reg, + unsigned int val), + + TP_ARGS(codec, reg, val), + + TP_STRUCT__entry( + __string( name, codec->name ) + __field( int, id ) + __field( unsigned int, reg ) + __field( unsigned int, val ) + ), + + TP_fast_assign( + __assign_str(name, codec->name); + __entry->id = codec->id; + __entry->reg = reg; + __entry->val = val; + ), + + TP_printk("codec=%s.%d reg=%x val=%x", __get_str(name), + (int)__entry->id, (unsigned int)__entry->reg, + (unsigned int)__entry->val) +); + +DEFINE_EVENT(snd_soc_reg, snd_soc_reg_write, + + TP_PROTO(struct snd_soc_codec *codec, unsigned int reg, + unsigned int val), + + TP_ARGS(codec, reg, val) + +); + +DEFINE_EVENT(snd_soc_reg, snd_soc_reg_read, + + TP_PROTO(struct snd_soc_codec *codec, unsigned int reg, + unsigned int val), + + TP_ARGS(codec, reg, val) + +); + + + +#endif /* _TRACE_ASOC_H */ + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index c18ce1d..700a6d5 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -39,6 +39,9 @@ #include <sound/soc-dapm.h> #include <sound/initval.h> +#define CREATE_TRACE_POINTS +#include <trace/events/asoc.h> + #define NAME_SIZE 32 static DEFINE_MUTEX(pcm_mutex); @@ -1914,6 +1917,7 @@ unsigned int snd_soc_read(struct snd_soc_codec *codec, unsigned int reg) ret = codec->driver->read(codec, reg); dev_dbg(codec->dev, "read %x => %x\n", reg, ret); + trace_snd_soc_reg_read(codec, reg, ret); return ret; } @@ -1923,6 +1927,7 @@ unsigned int snd_soc_write(struct snd_soc_codec *codec, unsigned int reg, unsigned int val) { dev_dbg(codec->dev, "write %x = %x\n", reg, val); + trace_snd_soc_reg_write(codec, reg, val); return codec->driver->write(codec, reg, val); } EXPORT_SYMBOL_GPL(snd_soc_write); -- 1.7.1

2 2

[alsa-devel] [PATCH] ASoC: Factor out boiler plate for DAPM event generation
by Mark Brown 10 Nov '10

10 Nov '10

Make the DAPM sequence execution look a bit nicer by factoring out the code to invoke an event into a single function since it's all the same pretty much. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/soc-dapm.c | 98 +++++++++++++++++++++++++------------------------- 1 files changed, 49 insertions(+), 49 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 450307c..5a5db3f 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -726,13 +726,55 @@ static void dapm_seq_insert(struct snd_soc_dapm_widget *new_widget, list_add_tail(&new_widget->power_list, list); } +static void dapm_seq_check_event(struct snd_soc_dapm_context *dapm, + struct snd_soc_dapm_widget *w, int event) +{ + struct snd_soc_card *card = dapm->card; + const char *ev_name; + int power, ret; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + ev_name = "PRE_PMU"; + power = 1; + break; + case SND_SOC_DAPM_POST_PMU: + ev_name = "POST_PMU"; + power = 1; + break; + case SND_SOC_DAPM_PRE_PMD: + ev_name = "PRE_PMD"; + power = 0; + break; + case SND_SOC_DAPM_POST_PMD: + ev_name = "POST_PMD"; + power = 0; + break; + default: + BUG(); + return; + } + + if (w->power != power) + return; + + if (w->event && (w->event_flags & event)) { + pop_dbg(dapm->dev, card->pop_time, "pop test : %s %s\n", + w->name, ev_name); + ret = w->event(w, NULL, event); + if (ret < 0) + pr_err("%s: %s event failed: %d\n", + ev_name, w->name, ret); + } +} + /* Apply the coalesced changes from a DAPM sequence */ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm, struct list_head *pending) { - struct snd_soc_dapm_widget *w; struct snd_soc_card *card = dapm->card; - int reg, power, ret; + struct snd_soc_dapm_widget *w; + int reg, power; unsigned int value = 0; unsigned int mask = 0; unsigned int cur_mask; @@ -757,29 +799,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm, "pop test : Queue %s: reg=0x%x, 0x%x/0x%x\n", w->name, reg, value, mask); - /* power up pre event */ - if (w->power && w->event && - (w->event_flags & SND_SOC_DAPM_PRE_PMU)) { - pop_dbg(dapm->dev, card->pop_time, - "pop test : %s PRE_PMU\n", w->name); - ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU); - if (ret < 0) - dev_err(dapm->dev, - "%s: pre event failed: %d\n", - w->name, ret); - } - - /* power down pre event */ - if (!w->power && w->event && - (w->event_flags & SND_SOC_DAPM_PRE_PMD)) { - pop_dbg(dapm->dev, card->pop_time, - "pop test : %s PRE_PMD\n", w->name); - ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD); - if (ret < 0) - dev_err(dapm->dev, - "%s: pre event failed: %d\n", - w->name, ret); - } + /* Check for events */ + dapm_seq_check_event(dapm, w, SND_SOC_DAPM_PRE_PMU); + dapm_seq_check_event(dapm, w, SND_SOC_DAPM_PRE_PMD); } if (reg >= 0) { @@ -791,30 +813,8 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm, } list_for_each_entry(w, pending, power_list) { - /* power up post event */ - if (w->power && w->event && - (w->event_flags & SND_SOC_DAPM_POST_PMU)) { - pop_dbg(dapm->dev, card->pop_time, - "pop test : %s POST_PMU\n", w->name); - ret = w->event(w, - NULL, SND_SOC_DAPM_POST_PMU); - if (ret < 0) - dev_err(dapm->dev, - "%s: post event failed: %d\n", - w->name, ret); - } - - /* power down post event */ - if (!w->power && w->event && - (w->event_flags & SND_SOC_DAPM_POST_PMD)) { - pop_dbg(dapm->dev, card->pop_time, - "pop test : %s POST_PMD\n", w->name); - ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD); - if (ret < 0) - dev_err(dapm->dev, - "%s: post event failed: %d\n", - w->name, ret); - } + dapm_seq_check_event(dapm, w, SND_SOC_DAPM_POST_PMU); + dapm_seq_check_event(dapm, w, SND_SOC_DAPM_POST_PMD); } } -- 1.7.1

2 1

[alsa-devel] [PATCH] add missing comparison to strcmp call
by abraham duenas 10 Nov '10

10 Nov '10

2 2

[alsa-devel] [PATCH 1/1] ALSA: AT73C213: Rectify misleading comment.
by Peter Rosin 10 Nov '10

10 Nov '10

1 0

[PATCH 1/1] ALSA: AT73C213: Rectify misleading comment.
by Peter Rosin 10 Nov '10

10 Nov '10

The Atmel SSC can divide by even numbers, not only powers of two. Signed-off-by: Peter Rosin <peda(a)axentia.se> diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 1bc56b2..337a002 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -155,7 +155,7 @@ static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip) if (max_tries < 1) max_tries = 1; - /* ssc_div must be a power of 2. */ + /* ssc_div must be even. */ ssc_div = (ssc_div + 1) & ~1UL; if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) { -- 1.7.2.3

1 0

[alsa-devel] HDMI on HDA device=3
by David Henningsson 10 Nov '10

10 Nov '10

I have seen a few HDMIs which share the HDA controller with the onboard sound card, but the codecs are different, e g the onboard one is at address #0 and the HDMI is at address #3 - or even #3, #7, #8 and #9 in some cases. Now, if the user specifies the device string hdmi:x (where x is card name/number), I'd like it to kind of autodetect this and use DEV=3 instead of DEV=0, and without breaking the cards where the hdmi is a separate card with a codec at address #0. However, it still seems like the device is at DEV=3 somehow. Now, looking at /usr/share/alsa/cards/HDA-Intel.conf, I notice that there are entries HDA-Intel.pcm.hdmi.0 which sets DEV=3, so it seems like someone already thought of this. However, just using "hdmi:x" does not trigger "DEV=3". I'm still not grepping all of the alsa lisp architecture stuff, so could someone explain to me how the HDA-Intel.pcm.hdmi.0 entry relates to the "hdmi:x" alsa device string? -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

3 8

[alsa-devel] [PATCH] sound/pci/ctxfi/ctpcm.c: Remove potential for use after free
by Julia Lawall 10 Nov '10

10 Nov '10

In each function, the value apcm is stored in the private_data field of runtime. At the same time the function ct_atc_pcm_free_substream is stored in the private_free field of the same structure. ct_atc_pcm_free_substream dereferences and ultimately frees the value in the private_data field. But each function can exit in an error case with apcm having been freed, in which case a subsequent call to the private_free function would perform a dereference after free. On the other hand, if the private_free field is not initialized, it is NULL, and not invoked (see snd_pcm_detach_substream in sound/core/pcm.c). To avoid the introduction of a dangling pointer, the initializations of the private_data and private_free fields are moved to the end of the function, past any possible free of apcm. This is safe because the previous calls to snd_pcm_hw_constraint_integer and snd_pcm_hw_constraint_minmax, which take runtime as an argument, do not refer to either of these fields. In each function, there is one error case where apcm needs to be freed, and a call to kfree is added. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2,e3; identifier f,free1,free2; expression a; @@ *e->f = a ... when != e->f = e1 when any if (...) { ... when != free1(...,e,...) when != e->f = e2 * kfree(a) ... when != free2(...,e,...) when != e->f = e3 } // </smpl> Signed-off-by: Julia Lawall <julia(a)diku.dk> --- sound/pci/ctxfi/ctpcm.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c index 85ab43e..457d211 100644 --- a/sound/pci/ctxfi/ctpcm.c +++ b/sound/pci/ctxfi/ctpcm.c @@ -129,8 +129,6 @@ static int ct_pcm_playback_open(struct snd_pcm_substream *substream) apcm->substream = substream; apcm->interrupt = ct_atc_pcm_interrupt; - runtime->private_data = apcm; - runtime->private_free = ct_atc_pcm_free_substream; if (IEC958 == substream->pcm->device) { runtime->hw = ct_spdif_passthru_playback_hw; atc->spdif_out_passthru(atc, 1); @@ -155,8 +153,12 @@ static int ct_pcm_playback_open(struct snd_pcm_substream *substream) } apcm->timer = ct_timer_instance_new(atc->timer, apcm); - if (!apcm->timer) + if (!apcm->timer) { + kfree(apcm); return -ENOMEM; + } + runtime->private_data = apcm; + runtime->private_free = ct_atc_pcm_free_substream; return 0; } @@ -278,8 +280,6 @@ static int ct_pcm_capture_open(struct snd_pcm_substream *substream) apcm->started = 0; apcm->substream = substream; apcm->interrupt = ct_atc_pcm_interrupt; - runtime->private_data = apcm; - runtime->private_free = ct_atc_pcm_free_substream; runtime->hw = ct_pcm_capture_hw; runtime->hw.rate_max = atc->rsr * atc->msr; @@ -298,8 +298,12 @@ static int ct_pcm_capture_open(struct snd_pcm_substream *substream) } apcm->timer = ct_timer_instance_new(atc->timer, apcm); - if (!apcm->timer) + if (!apcm->timer) { + kfree(apcm); return -ENOMEM; + } + runtime->private_data = apcm; + runtime->private_free = ct_atc_pcm_free_substream; return 0; }

1 0

[alsa-devel] [PATCH] ASoC: tpa6130a2: Revisit power-up sequence
by Jarkko Nikula 09 Nov '10

09 Nov '10

There are no known problems with current power-up sequence which first sets the /shutdown pin high and then enables the supply. However, swap the order so that the device is kept in shutdown/reset mode during the supply voltage transition since slowly rising voltages can usually cause problems if the device is not kept in reset. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> --- sound/soc/codecs/tpa6130a2.c | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c index f9a92ea..9b98107 100644 --- a/sound/soc/codecs/tpa6130a2.c +++ b/sound/soc/codecs/tpa6130a2.c @@ -126,16 +126,15 @@ static int tpa6130a2_power(int power) mutex_lock(&data->mutex); if (power && !data->power_state) { - /* Power on */ - if (data->power_gpio >= 0) - gpio_set_value(data->power_gpio, 1); - ret = regulator_enable(data->supply); if (ret != 0) { dev_err(&tpa6130a2_client->dev, "Failed to enable supply: %d\n", ret); goto exit; } + /* Power on */ + if (data->power_gpio >= 0) + gpio_set_value(data->power_gpio, 1); data->power_state = 1; ret = tpa6130a2_initialize(); -- 1.7.2.3

4 3

[PATCH] add missing comparison to strcmp call
by abraham duenas 09 Nov '10

09 Nov '10

Signed-off-by: abraham duenas <abraham.duenas(a)ti.com> --- src/ucm/main.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/ucm/main.c b/src/ucm/main.c index e233f41..a73595d 100644 --- a/src/ucm/main.c +++ b/src/ucm/main.c @@ -774,9 +774,9 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr, pthread_mutex_lock(&uc_mgr->mutex); if (strcmp(identifier, "_verbs") == 0) err = get_verb_list(uc_mgr, list); - else if (strcmp(identifier, "_enadevs")) + else if (strcmp(identifier, "_enadevs") == 0) err = get_enabled_device_list(uc_mgr, list); - else if (strcmp(identifier, "_enamods")) + else if (strcmp(identifier, "_enamods") == 0) err = get_enabled_modifier_list(uc_mgr, list); else { str1 = strchr(identifier, '/'); -- 1.7.2.2

1 0

[alsa-devel] [PATCH] ASoC: Ensure sane WM835x AIF configuration by default
by Mark Brown 09 Nov '10

09 Nov '10

Ensure that whatever ran before us leaves the WM835x with a sane default audio interface configuration as we do not override the companding, loopback or tristate settings and do not reset the chip at startup (as it is a PMIC). Reported-by: Keiji Mitsuhisa <Keiji.Mitsuhisa(a)wolfsonmicro.com> Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8350.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 4f3e919..7611add 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1586,6 +1586,13 @@ static int wm8350_codec_probe(struct snd_soc_codec *codec) wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME, WM8350_OUT2_VU | WM8350_OUT2R_MUTE); + /* Make sure AIF tristating is disabled by default */ + wm8350_clear_bits(wm8350, WM8350_AI_FORMATING, WM8350_AIF_TRI); + + /* Make sure we've got a sane companding setup too */ + wm8350_clear_bits(wm8350, WM8350_ADC_DAC_COMP, + WM8350_DAC_COMP | WM8350_LOOPBACK); + /* Make sure jack detect is disabled to start off with */ wm8350_clear_bits(wm8350, WM8350_JACK_DETECT, WM8350_JDL_ENA | WM8350_JDR_ENA); -- 1.7.1

2 1

[alsa-devel] [PATCH 1/2] ASoC: Update DAPM debug and error prints
by Jarkko Nikula 09 Nov '10

09 Nov '10

Switch printk and pr_ prints to dev_ variants. It is helpful to see parent device of DAPM context especially when there are multiple DAPM contexts (codecs currently). This is mostly simple conversion. Exceptions are in snd_soc_dapm_set_pin that prints also pin state, uniform "dapm: unknown pin" error prints from snd_soc_dapm_set_pin, snd_soc_dapm_force_enable_pin and snd_soc_dapm_ignore_suspend, and pop_dbg which is converted by an another patch. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- sound/soc/soc-dapm.c | 100 +++++++++++++++++++++++++++---------------------- 1 files changed, 55 insertions(+), 45 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 960790c..e8997bb 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -319,8 +319,8 @@ static int dapm_update_bits(struct snd_soc_dapm_widget *widget) pop_wait(card->pop_time); snd_soc_write(codec, widget->reg, new); } - pr_debug("reg %x old %x new %x change %d\n", widget->reg, - old, new, change); + dev_dbg(dapm->dev, "reg %x old %x new %x change %d\n", widget->reg, + old, new, change); return change; } @@ -375,9 +375,9 @@ static int dapm_new_mixer(struct snd_soc_dapm_context *dapm, path->long_name); ret = snd_ctl_add(card, path->kcontrol); if (ret < 0) { - printk(KERN_ERR "asoc: failed to add dapm kcontrol %s: %d\n", - path->long_name, - ret); + dev_err(dapm->dev, + "asoc: failed to add dapm kcontrol %s: %d\n", + path->long_name, ret); kfree(path->long_name); path->long_name = NULL; return ret; @@ -397,7 +397,7 @@ static int dapm_new_mux(struct snd_soc_dapm_context *dapm, int ret = 0; if (!w->num_kcontrols) { - printk(KERN_ERR "asoc: mux %s has no controls\n", w->name); + dev_err(dapm->dev, "asoc: mux %s has no controls\n", w->name); return -EINVAL; } @@ -413,7 +413,7 @@ static int dapm_new_mux(struct snd_soc_dapm_context *dapm, return ret; err: - printk(KERN_ERR "asoc: failed to add kcontrol %s\n", w->name); + dev_err(dapm->dev, "asoc: failed to add kcontrol %s\n", w->name); return ret; } @@ -422,7 +422,8 @@ static int dapm_new_pga(struct snd_soc_dapm_context *dapm, struct snd_soc_dapm_widget *w) { if (w->num_kcontrols) - pr_err("asoc: PGA controls not supported: '%s'\n", w->name); + dev_err(w->dapm->dev, + "asoc: PGA controls not supported: '%s'\n", w->name); return 0; } @@ -448,7 +449,8 @@ static int snd_soc_dapm_suspend_check(struct snd_soc_dapm_widget *widget) case SNDRV_CTL_POWER_D3hot: case SNDRV_CTL_POWER_D3cold: if (widget->ignore_suspend) - pr_debug("%s ignoring suspend\n", widget->name); + dev_dbg(widget->dapm->dev, "%s ignoring suspend\n", + widget->name); return widget->ignore_suspend; default: return 1; @@ -579,7 +581,7 @@ static int dapm_generic_apply_power(struct snd_soc_dapm_widget *w) /* call any power change event handlers */ if (w->event) - pr_debug("power %s event for %s flags %x\n", + dev_dbg(w->dapm->dev, "power %s event for %s flags %x\n", w->power ? "on" : "off", w->name, w->event_flags); @@ -754,8 +756,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm, w->name); ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU); if (ret < 0) - pr_err("%s: pre event failed: %d\n", - w->name, ret); + dev_err(dapm->dev, + "%s: pre event failed: %d\n", + w->name, ret); } /* power down pre event */ @@ -765,8 +768,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm, w->name); ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD); if (ret < 0) - pr_err("%s: pre event failed: %d\n", - w->name, ret); + dev_err(dapm->dev, + "%s: pre event failed: %d\n", + w->name, ret); } } @@ -787,8 +791,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm, ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMU); if (ret < 0) - pr_err("%s: post event failed: %d\n", - w->name, ret); + dev_err(dapm->dev, + "%s: post event failed: %d\n", + w->name, ret); } /* power down post event */ @@ -798,8 +803,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm, w->name); ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD); if (ret < 0) - pr_err("%s: post event failed: %d\n", - w->name, ret); + dev_err(dapm->dev, + "%s: post event failed: %d\n", + w->name, ret); } } } @@ -880,8 +886,8 @@ static void dapm_seq_run(struct snd_soc_dapm_context *dapm, } if (ret < 0) - pr_err("Failed to apply widget power: %d\n", - ret); + dev_err(w->dapm->dev, + "Failed to apply widget power: %d\n", ret); } if (!list_empty(&pending)) @@ -975,7 +981,8 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event) ret = snd_soc_dapm_set_bias_level(card, dapm, SND_SOC_BIAS_STANDBY); if (ret != 0) - pr_err("Failed to turn on bias: %d\n", ret); + dev_err(dapm->dev, + "Failed to turn on bias: %d\n", ret); } /* If we're changing to all on or all off then prepare */ @@ -983,7 +990,8 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event) (!sys_power && dapm->bias_level == SND_SOC_BIAS_ON)) { ret = snd_soc_dapm_set_bias_level(card, dapm, SND_SOC_BIAS_PREPARE); if (ret != 0) - pr_err("Failed to prepare bias: %d\n", ret); + dev_err(dapm->dev, + "Failed to prepare bias: %d\n", ret); } /* Power down widgets first; try to avoid amplifying pops. */ @@ -996,7 +1004,8 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event) if (dapm->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) { ret = snd_soc_dapm_set_bias_level(card, dapm, SND_SOC_BIAS_STANDBY); if (ret != 0) - pr_err("Failed to apply standby bias: %d\n", ret); + dev_err(dapm->dev, + "Failed to apply standby bias: %d\n", ret); } /* If we're in standby and can support bias off then do that */ @@ -1004,14 +1013,16 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event) dapm->idle_bias_off) { ret = snd_soc_dapm_set_bias_level(card, dapm, SND_SOC_BIAS_OFF); if (ret != 0) - pr_err("Failed to turn off bias: %d\n", ret); + dev_err(dapm->dev, + "Failed to turn off bias: %d\n", ret); } /* If we just powered up then move to active bias */ if (dapm->bias_level == SND_SOC_BIAS_PREPARE && sys_power) { ret = snd_soc_dapm_set_bias_level(card, dapm, SND_SOC_BIAS_ON); if (ret != 0) - pr_err("Failed to apply active bias: %d\n", ret); + dev_err(dapm->dev, + "Failed to apply active bias: %d\n", ret); } pop_dbg(card->pop_time, "DAPM sequencing finished, waiting %dms\n", @@ -1111,9 +1122,9 @@ void snd_soc_dapm_debugfs_init(struct snd_soc_dapm_context *dapm) dapm->debugfs_dapm, w, &dapm_widget_power_fops); if (!d) - printk(KERN_WARNING - "ASoC: Failed to create %s debugfs file\n", - w->name); + dev_warn(w->dapm->dev, + "ASoC: Failed to create %s debugfs file\n", + w->name); } } #else @@ -1279,7 +1290,8 @@ static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm, list_for_each_entry(w, &dapm->widgets, list) { if (!strcmp(w->name, pin)) { - pr_debug("dapm: %s: pin %s\n", dapm->codec->name, pin); + dev_dbg(w->dapm->dev, "dapm: pin %s = %d\n", + pin, status); w->connected = status; /* Allow disabling of forced pins */ if (status == 0) @@ -1288,8 +1300,7 @@ static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm, } } - pr_err("dapm: %s: configuring unknown pin %s\n", - dapm->codec->name, pin); + dev_err(dapm->dev, "dapm: unknown pin %s\n", pin); return -EINVAL; } @@ -1415,8 +1426,8 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm, return 0; err: - printk(KERN_WARNING "asoc: no dapm match for %s --> %s --> %s\n", source, - control, sink); + dev_warn(dapm->dev, "asoc: no dapm match for %s --> %s --> %s\n", + source, control, sink); kfree(path); return ret; } @@ -1442,9 +1453,8 @@ int snd_soc_dapm_add_routes(struct snd_soc_dapm_context *dapm, for (i = 0; i < num; i++) { ret = snd_soc_dapm_add_route(dapm, route); if (ret < 0) { - printk(KERN_ERR "Failed to add route %s->%s\n", - route->source, - route->sink); + dev_err(dapm->dev, "Failed to add route %s->%s\n", + route->source, route->sink); return ret; } route++; @@ -1982,9 +1992,9 @@ int snd_soc_dapm_new_controls(struct snd_soc_dapm_context *dapm, for (i = 0; i < num; i++) { ret = snd_soc_dapm_new_control(dapm, widget); if (ret < 0) { - printk(KERN_ERR - "ASoC: Failed to create DAPM control %s: %d\n", - widget->name, ret); + dev_err(dapm->dev, + "ASoC: Failed to create DAPM control %s: %d\n", + widget->name, ret); return ret; } widget++; @@ -2002,8 +2012,8 @@ static void soc_dapm_stream_event(struct snd_soc_dapm_context *dapm, { if (!w->sname) continue; - pr_debug("widget %s\n %s stream %s event %d\n", - w->name, w->sname, stream, event); + dev_dbg(w->dapm->dev, "widget %s\n %s stream %s event %d\n", + w->name, w->sname, stream, event); if (strstr(w->sname, stream)) { switch(event) { case SND_SOC_DAPM_STREAM_START: @@ -2085,15 +2095,15 @@ int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm, list_for_each_entry(w, &dapm->widgets, list) { if (!strcmp(w->name, pin)) { - pr_debug("dapm: %s: pin %s\n", dapm->codec->name, pin); + dev_dbg(w->dapm->dev, + "dapm: force enable pin %s\n", pin); w->connected = 1; w->force = 1; return 0; } } - pr_err("dapm: %s: configuring unknown pin %s\n", - dapm->codec->name, pin); + dev_err(dapm->dev, "dapm: unknown pin %s\n", pin); return -EINVAL; } EXPORT_SYMBOL_GPL(snd_soc_dapm_force_enable_pin); @@ -2180,7 +2190,7 @@ int snd_soc_dapm_ignore_suspend(struct snd_soc_dapm_context *dapm, } } - pr_err("Unknown DAPM pin: %s\n", pin); + dev_err(dapm->dev, "dapm: unknown pin %s\n", pin); return -EINVAL; } EXPORT_SYMBOL_GPL(snd_soc_dapm_ignore_suspend); -- 1.7.2.3

2 2

[alsa-devel] [PATCH] ASoC: Remove broken WM8350 direction constants
by Mark Brown 09 Nov '10

09 Nov '10

The WM8350 driver was using some custom constants to interpret the direction of the MCLK signal which had the opposite values to those used as standard by the ASoC core, causing confusion in machine drivers such as the 1133-EV1 board. Reported-by: Tommy Zhu <Tommy.Zhu(a)wolfsonmicro.com> Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- include/linux/mfd/wm8350/audio.h | 3 --- sound/soc/codecs/wm8350.c | 2 +- 2 files changed, 1 insertions(+), 4 deletions(-) diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h index a95141e..bd581c6 100644 --- a/include/linux/mfd/wm8350/audio.h +++ b/include/linux/mfd/wm8350/audio.h @@ -522,9 +522,6 @@ #define WM8350_MCLK_SEL_PLL_32K 3 #define WM8350_MCLK_SEL_MCLK 5 -#define WM8350_MCLK_DIR_OUT 0 -#define WM8350_MCLK_DIR_IN 1 - /* clock divider id's */ #define WM8350_ADC_CLKDIV 0 #define WM8350_DAC_CLKDIV 1 diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index f4f1fba..4f3e919 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -831,7 +831,7 @@ static int wm8350_set_dai_sysclk(struct snd_soc_dai *codec_dai, } /* MCLK direction */ - if (dir == WM8350_MCLK_DIR_OUT) + if (dir == SND_SOC_CLOCK_OUT) wm8350_set_bits(wm8350, WM8350_CLOCK_CONTROL_2, WM8350_MCLK_DIR); else -- 1.7.1

2 1

[alsa-devel] [PATCH] sound/mixart: avoid redefining {readl, write}_{le, be} accessors
by Florian Fainelli 09 Nov '10

09 Nov '10

From: Florian Fainelli <florian(a)openwrt.org> If the platform already provides a definition for these accessors do not redefine them. The warning was caught on MIPS. Signed-off-by: Florian Fainelli <florian(a)openwrt.org> --- diff --git a/sound/pci/mixart/mixart_hwdep.h b/sound/pci/mixart/mixart_hwdep.h index a46f508..812e288 100644 --- a/sound/pci/mixart/mixart_hwdep.h +++ b/sound/pci/mixart/mixart_hwdep.h @@ -25,11 +25,21 @@ #include <sound/hwdep.h> +#ifndef readl_be #define readl_be(x) be32_to_cpu(__raw_readl(x)) +#endif + +#ifndef writel_be #define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr) +#endif +#ifndef readl_le #define readl_le(x) le32_to_cpu(__raw_readl(x)) +#endif + +#ifndef writel_le #define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr) +#endif #define MIXART_MEM(mgr,x) ((mgr)->mem[0].virt + (x)) #define MIXART_REG(mgr,x) ((mgr)->mem[1].virt + (x)) -- 1.7.1

1 0

[alsa-devel] [PATCH] ALSA: HDA: Enable digital mic on IDT 92HD87B
by David Henningsson 09 Nov '10

09 Nov '10

BugLink: http://launchpad.net/bugs/673075 According to the datasheet of 92HD87B, there is a digital mic at nid 0x11, so enable it in order to be able to use the mic. Cc: stable(a)kernel.org Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

1 0

[PATCH 1/3] ALSA: HDA: Create mixers on ALC887
by David Henningsson 09 Nov '10

09 Nov '10

BugLink: http://launchpad.net/bugs/669092 ALC887 does not have any volume control ability on the mixer NIDs, so put the volume controls on the dac NIDs instead. Without this patch, ALC887 users cannot use alsamixer at all. Cc: stable(a)kernel.org Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 10 ++++++++-- 1 files changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 788ac4b..ce4017e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10816,6 +10816,9 @@ static int alc_auto_add_mic_boost(struct hda_codec *codec) return 0; } +static int alc861vd_auto_create_multi_out_ctls(struct alc_spec *spec, + const struct auto_pin_cfg *cfg); + /* almost identical with ALC880 parser... */ static int alc882_parse_auto_config(struct hda_codec *codec) { @@ -10833,7 +10836,10 @@ static int alc882_parse_auto_config(struct hda_codec *codec) err = alc880_auto_fill_dac_nids(spec, &spec->autocfg); if (err < 0) return err; - err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg); + if (codec->vendor_id == 0x10ec0887) + err = alc861vd_auto_create_multi_out_ctls(spec, &spec->autocfg); + else + err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg); if (err < 0) return err; err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pins[0], @@ -16955,7 +16961,7 @@ static void alc861vd_auto_init_analog_input(struct hda_codec *codec) #define alc861vd_idx_to_mixer_switch(nid) ((nid) + 0x0c) /* add playback controls from the parsed DAC table */ -/* Based on ALC880 version. But ALC861VD has separate, +/* Based on ALC880 version. But ALC861VD and ALC887 have separate, * different NIDs for mute/unmute switch and volume control */ static int alc861vd_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) -- 1.7.1 --------------090900090009040602080601--

1 0

[alsa-devel] question about sound/pci/ctxfi/ctpcm.c
by Julia Lawall 09 Nov '10

09 Nov '10

The file sound/pci/ctxfi/ctpcm.c contains the functions ct_pcm_playback_open and ct_pcm_capture_open that contain the following pattern of code: runtime->private_data = apcm; ... if (err < 0) { kfree(apcm); return err; } I wonder if this leaves a dangling pointer to apcm in runtime? The function ct_atc_pcm_free_substream on the other hand does set the private_data field to NULL after freeing apcm. But perhaps there is something in the calling context of open that ensures that if the open function fails, the private_data field of runtime will never be used? thanks, julia

2 4

[alsa-devel] [PATCH 17/17][trivial] Sound, OSS: Remove unnecessary casts of void ptr returning alloc function return values
by Jesper Juhl 09 Nov '10

09 Nov '10

Hi, The [vk][cmz]alloc(_node) family of functions return void pointers which it's completely unnecessary/pointless to cast to other pointer types since that happens implicitly. This patch removes such casts from sound/oss/ Signed-off-by: Jesper Juhl <jj(a)chaosbits.net> --- midibuf.c | 4 ++-- pss.c | 6 +++--- sequencer.c | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/oss/midibuf.c b/sound/oss/midibuf.c index 782b3b8..ceedb1e 100644 --- a/sound/oss/midibuf.c +++ b/sound/oss/midibuf.c @@ -178,7 +178,7 @@ int MIDIbuf_open(int dev, struct file *file) return err; parms[dev].prech_timeout = MAX_SCHEDULE_TIMEOUT; - midi_in_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf)); + midi_in_buf[dev] = vmalloc(sizeof(struct midi_buf)); if (midi_in_buf[dev] == NULL) { @@ -188,7 +188,7 @@ int MIDIbuf_open(int dev, struct file *file) } midi_in_buf[dev]->len = midi_in_buf[dev]->head = midi_in_buf[dev]->tail = 0; - midi_out_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf)); + midi_out_buf[dev] = vmalloc(sizeof(struct midi_buf)); if (midi_out_buf[dev] == NULL) { diff --git a/sound/oss/pss.c b/sound/oss/pss.c index e19dd5d..9b800ce 100644 --- a/sound/oss/pss.c +++ b/sound/oss/pss.c @@ -859,7 +859,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, return 0; case SNDCTL_COPR_LOAD: - buf = (copr_buffer *) vmalloc(sizeof(copr_buffer)); + buf = vmalloc(sizeof(copr_buffer)); if (buf == NULL) return -ENOSPC; if (copy_from_user(buf, arg, sizeof(copr_buffer))) { @@ -871,7 +871,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, return err; case SNDCTL_COPR_SENDMSG: - mbuf = (copr_msg *)vmalloc(sizeof(copr_msg)); + mbuf = vmalloc(sizeof(copr_msg)); if (mbuf == NULL) return -ENOSPC; if (copy_from_user(mbuf, arg, sizeof(copr_msg))) { @@ -895,7 +895,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, case SNDCTL_COPR_RCVMSG: err = 0; - mbuf = (copr_msg *)vmalloc(sizeof(copr_msg)); + mbuf = vmalloc(sizeof(copr_msg)); if (mbuf == NULL) return -ENOSPC; data = (unsigned short *)mbuf->data; diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c index e85789e..5ea1098 100644 --- a/sound/oss/sequencer.c +++ b/sound/oss/sequencer.c @@ -1646,13 +1646,13 @@ void sequencer_init(void) { if (sequencer_ok) return; - queue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * EV_SZ); + queue = vmalloc(SEQ_MAX_QUEUE * EV_SZ); if (queue == NULL) { printk(KERN_ERR "sequencer: Can't allocate memory for sequencer output queue\n"); return; } - iqueue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * IEV_SZ); + iqueue = vmalloc(SEQ_MAX_QUEUE * IEV_SZ); if (iqueue == NULL) { printk(KERN_ERR "sequencer: Can't allocate memory for sequencer input queue\n"); -- Jesper Juhl <jj(a)chaosbits.net> http://www.chaosbits.net/ Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html Plain text mails only, please.

1 0

[alsa-devel] [PATCH] ALSA: add support for disabling period irq
by Pierre-Louis Bossart 08 Nov '10

08 Nov '10

Merged and cleaned patch based on earlier patches posted on alsa-devel by Clemens Ladisch <clemens(a)ladisch.de> and Pierre-Louis Bossart <pierre-louis.bossart(a)intel.com> This patch disables period interrupts which are not needed when the application relies on a system timer to wake-up and refill the ring buffer. The behavior of the driver is left unchanged, and interrupts are only disabled if the application requests this configuration. The behavior in case of underruns is slightly different, instead of being detected during the period interrupts the underruns are detected when the application calls snd_pcm_update_avail, which in turns forces a refresh of the hw pointer and shows the buffer is empty. More specifically this patch makes a lot of sense when PulseAudio relies on timer-based scheduling to access audio devices such as HDAudio or Intel SST. Disabling interrupts removes two unwanted wake-ups due to period elapsed events in low-power playback modes. It also simplifies PulseAudio voice modules used for speech calls. To quote Lennart "This patch looks very interesting and desirable. This is something have long been waiting for." Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)intel.com> --- core/pcm_lib.c | 8 ++++++-- core/pcm_native.c | 6 ++++++ include/asound.h | 4 ++++ include/pcm.h | 1 + pci/hda/hda_intel.c | 9 ++++++--- pci/oxygen/oxygen_pcm.c | 14 ++++++++++---- 6 files changed, 33 insertions(+), 9 deletions(-) diff --git a/core/pcm_lib.c b/core/pcm_lib.c index a1707cc..4963d8f 100644 --- a/core/pcm_lib.c +++ b/core/pcm_lib.c @@ -374,7 +374,8 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream, (unsigned long)runtime->hw_ptr_base); } /* something must be really wrong */ - if (delta >= runtime->buffer_size + runtime->period_size) { + if (delta >= runtime->buffer_size + runtime->period_size && + !runtime->no_period_irq) { hw_ptr_error(substream, "Unexpected hw_pointer value %s" "(stream=%i, pos=%ld, new_hw_ptr=%ld, " @@ -395,6 +396,8 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream, */ if (runtime->hw.info & SNDRV_PCM_INFO_BATCH) goto no_jiffies_check; + if (runtime->no_period_irq) + goto no_jiffies_check; hdelta = delta; if (hdelta < runtime->delay) goto no_jiffies_check; @@ -431,7 +434,8 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream, hw_base = new_hw_ptr - (new_hw_ptr % runtime->buffer_size); } no_jiffies_check: - if (delta > runtime->period_size + runtime->period_size / 2) { + if (delta > runtime->period_size + runtime->period_size / 2 && + !runtime->no_period_irq) { hw_ptr_error(substream, "Lost interrupts? %s" "(stream=%i, delta=%ld, new_hw_ptr=%ld, " diff --git a/core/pcm_native.c b/core/pcm_native.c index 8bc7cb3..92c8c59 100644 --- a/core/pcm_native.c +++ b/core/pcm_native.c @@ -412,6 +412,12 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream, goto _error; } + if (params->info & SNDRV_PCM_INFO_NO_PERIOD_IRQ) + runtime->no_period_irq = !!(params->flags & + SNDRV_PCM_HW_PARAMS_NO_PERIOD_IRQ); + else + runtime->no_period_irq = 0; + runtime->access = params_access(params); runtime->format = params_format(params); runtime->subformat = params_subformat(params); diff --git a/include/asound.h b/include/asound.h index a1803ec..d4b5f2d 100644 --- a/include/asound.h +++ b/include/asound.h @@ -259,6 +259,7 @@ typedef int __bitwise snd_pcm_subformat_t; #define SNDRV_PCM_INFO_HALF_DUPLEX 0x00100000 /* only half duplex */ #define SNDRV_PCM_INFO_JOINT_DUPLEX 0x00200000 /* playback and capture stream are somewhat correlated */ #define SNDRV_PCM_INFO_SYNC_START 0x00400000 /* pcm support some kind of sync go */ +#define SNDRV_PCM_INFO_NO_PERIOD_IRQ 0x00800000 /* period interrupt can be disabled */ #define SNDRV_PCM_INFO_FIFO_IN_FRAMES 0x80000000 /* internal kernel flag - FIFO size is in frames */ typedef int __bitwise snd_pcm_state_t; @@ -334,6 +335,9 @@ typedef int snd_pcm_hw_param_t; #define SNDRV_PCM_HW_PARAM_LAST_INTERVAL SNDRV_PCM_HW_PARAM_TICK_TIME #define SNDRV_PCM_HW_PARAMS_NORESAMPLE (1<<0) /* avoid rate resampling */ +#define SNDRV_PCM_HW_PARAMS_EXPORT_BUFFER (1<<1) /* export buffer */ +#define SNDRV_PCM_HW_PARAMS_NO_PERIOD_IRQ (1<<2) /* disable period + interrupts */ struct snd_interval { unsigned int min, max; diff --git a/include/pcm.h b/include/pcm.h index dfd9b76..9abb4aa 100644 --- a/include/pcm.h +++ b/include/pcm.h @@ -297,6 +297,7 @@ struct snd_pcm_runtime { unsigned int info; unsigned int rate_num; unsigned int rate_den; + bool no_period_irq; /* -- SW params -- */ int tstamp_mode; /* mmap timestamp is updated */ diff --git a/pci/hda/hda_intel.c b/pci/hda/hda_intel.c index 38b063e..9f456a8 100644 --- a/pci/hda/hda_intel.c +++ b/pci/hda/hda_intel.c @@ -1227,7 +1227,8 @@ static int azx_setup_periods(struct azx *chip, pos_adj = 0; } else { ofs = setup_bdle(substream, azx_dev, - &bdl, ofs, pos_adj, 1); + &bdl, ofs, pos_adj, + !substream->runtime->no_period_irq); if (ofs < 0) goto error; } @@ -1239,7 +1240,8 @@ static int azx_setup_periods(struct azx *chip, period_bytes - pos_adj, 0); else ofs = setup_bdle(substream, azx_dev, &bdl, ofs, - period_bytes, 1); + period_bytes, + !substream->runtime->no_period_irq); if (ofs < 0) goto error; } @@ -1507,7 +1509,8 @@ static struct snd_pcm_hardware azx_pcm_hw = { /* No full-resume yet implemented */ /* SNDRV_PCM_INFO_RESUME |*/ SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_SYNC_START), + SNDRV_PCM_INFO_SYNC_START | + SNDRV_PCM_INFO_NO_PERIOD_IRQ), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, .rate_min = 48000, diff --git a/pci/oxygen/oxygen_pcm.c b/pci/oxygen/oxygen_pcm.c index 8146674..a32ee97 100644 --- a/pci/oxygen/oxygen_pcm.c +++ b/pci/oxygen/oxygen_pcm.c @@ -39,7 +39,8 @@ static const struct snd_pcm_hardware oxygen_stereo_hardware = { SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_SYNC_START, + SNDRV_PCM_INFO_SYNC_START | + SNDRV_PCM_INFO_NO_PERIOD_IRQ, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, .rates = SNDRV_PCM_RATE_32000 | @@ -65,7 +66,8 @@ static const struct snd_pcm_hardware oxygen_multichannel_hardware = { SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_SYNC_START, + SNDRV_PCM_INFO_SYNC_START | + SNDRV_PCM_INFO_NO_PERIOD_IRQ, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, .rates = SNDRV_PCM_RATE_32000 | @@ -91,7 +93,8 @@ static const struct snd_pcm_hardware oxygen_ac97_hardware = { SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_SYNC_START, + SNDRV_PCM_INFO_SYNC_START | + SNDRV_PCM_INFO_NO_PERIOD_IRQ, .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, .rate_min = 48000, @@ -530,7 +533,10 @@ static int oxygen_prepare(struct snd_pcm_substream *substream) oxygen_set_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask); oxygen_clear_bits8(chip, OXYGEN_DMA_FLUSH, channel_mask); - chip->interrupt_mask |= channel_mask; + if (substream->runtime->no_period_irq) + chip->interrupt_mask &= ~channel_mask; + else + chip->interrupt_mask |= channel_mask; oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, chip->interrupt_mask); spin_unlock_irq(&chip->reg_lock); return 0; -- 1.7.2.3

5 17

[alsa-devel] [PATCH 1/2] pcm: pass hw_params flags to slave
by Pierre-Louis Bossart 08 Nov '10

08 Nov '10

fix required before interrupt disabling routines patch can be applied. Without this fix, the interrupts are only disabled when accessing directly hw devices. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)intel.com> --- src/pcm/pcm_params.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/src/pcm/pcm_params.c b/src/pcm/pcm_params.c index 3a90bcd..416b081 100644 --- a/src/pcm/pcm_params.c +++ b/src/pcm/pcm_params.c @@ -2126,6 +2126,7 @@ int _snd_pcm_hw_params_refine(snd_pcm_hw_params_t *params, err = changed; } params->info &= src->info; + params->flags = src->flags; /* propagate flags to slave */ return err; } -- 1.7.2.3

5 13

[alsa-devel] [PATCH] ASoC: soc-cache: Use BUG_ON() for unsupported hw_read() calls
by Dimitris Papastamos 08 Nov '10

08 Nov '10

Instead of dereferencing a NULL function pointer and falling apart use BUG_ON() for any unimplemented hw_read() calls. Signed-off-by: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> --- sound/soc/soc-cache.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c index 8785a0c..e747998 100644 --- a/sound/soc/soc-cache.c +++ b/sound/soc/soc-cache.c @@ -25,6 +25,7 @@ static unsigned int snd_soc_4_12_read(struct snd_soc_codec *codec, if (codec->cache_only) return -1; + BUG_ON(!codec->hw_read); return codec->hw_read(codec, reg); } @@ -99,6 +100,7 @@ static unsigned int snd_soc_7_9_read(struct snd_soc_codec *codec, if (codec->cache_only) return -1; + BUG_ON(!codec->hw_read); return codec->hw_read(codec, reg); } @@ -199,6 +201,7 @@ static unsigned int snd_soc_8_8_read(struct snd_soc_codec *codec, if (codec->cache_only) return -1; + BUG_ON(!codec->hw_read); return codec->hw_read(codec, reg); } @@ -270,6 +273,7 @@ static unsigned int snd_soc_8_16_read(struct snd_soc_codec *codec, if (codec->cache_only) return -1; + BUG_ON(!codec->hw_read); return codec->hw_read(codec, reg); } else { return cache[reg]; @@ -420,6 +424,7 @@ static unsigned int snd_soc_16_8_read(struct snd_soc_codec *codec, if (codec->cache_only) return -1; + BUG_ON(!codec->hw_read); return codec->hw_read(codec, reg); } @@ -531,6 +536,7 @@ static unsigned int snd_soc_16_16_read(struct snd_soc_codec *codec, if (codec->cache_only) return -1; + BUG_ON(!codec->hw_read); return codec->hw_read(codec, reg); } -- 1.7.3.2

3 2

[alsa-devel] [PATCH] ASoC: s3c24xx: Fix compilation problem.
by Marek Belisko 08 Nov '10

08 Nov '10

When make mini2440_defconfig compilation end with undefined references to DMA functions. There was missing selection for S3C2410_DMA when compile ASoC audio for S3C24xx CPU. Tested on mini2440 board. Signed-off-by: Marek Belisko <marek.belisko(a)gmail.com> --- sound/soc/s3c24xx/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 8a6b53c..d85bf8a 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -2,6 +2,7 @@ config SND_S3C24XX_SOC tristate "SoC Audio for the Samsung S3CXXXX chips" depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 select S3C64XX_DMA if ARCH_S3C64XX + select S3C2410_DMA if ARCH_S3C2410 help Say Y or M if you want to add support for codecs attached to the S3C24XX AC97 or I2S interfaces. You will also need to -- 1.7.1

3 2

[alsa-devel] [PATCH] ASoC: Remove unneeded use of address-of operator
by Dimitris Papastamos 08 Nov '10

08 Nov '10

There is no need to use '&' in this case. Either way, if a is an array of some type, then a == &a == &a[0]. Signed-off-by: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8580.c | 2 +- sound/soc/codecs/wm8741.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index a2e0ed5..eda0e90 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -905,7 +905,7 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8580 = { .set_bias_level = wm8580_set_bias_level, .reg_cache_size = ARRAY_SIZE(wm8580_reg), .reg_word_size = sizeof(u16), - .reg_cache_default = &wm8580_reg, + .reg_cache_default = wm8580_reg, }; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c index 90e31e9..9304075 100644 --- a/sound/soc/codecs/wm8741.c +++ b/sound/soc/codecs/wm8741.c @@ -455,7 +455,7 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8741 = { .resume = wm8741_resume, .reg_cache_size = ARRAY_SIZE(wm8741_reg_defaults), .reg_word_size = sizeof(u16), - .reg_cache_default = &wm8741_reg_defaults, + .reg_cache_default = wm8741_reg_defaults, }; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) -- 1.7.3.2

3 2

[alsa-devel] SoundBlaster 16 PnP CT2950 Technical Specification
by Florian Scholz 08 Nov '10

08 Nov '10

Good evening. I need the technical specification for the sound card sb16 ct2950 for academic purpose. Thank you Florian Scholz

2 1

[alsa-devel] ALSA processor usage is too high
by Adam Rosenberg 08 Nov '10

08 Nov '10

I am trying to decode 8 MP3 files simultaneously. Each file is 3 minutes 11 seconds long. When I just decode the files and copy the PCM data to memory it takes 2 minutes 36 seconds. When I do the same test after opening 8 ALSA PCM streams and while writing data to them it takes 4 minutes 37 seconds. This is much too slow for what should be a simple copy operation. I need to have 8 MP3 files decoding and playing on our custom board. I have taken the driver as far as I can on my own. I am seeking expert help to get this working as soon as possible. I am sorry if this was not the appropriate place to post such a request. Please contact me directly if you are interested in working on this project. The custom board is setup as follows: Analog Devices BF537 processor running uClinux from svn://blackfin.uclinux.org/uclinux-dist/trunk uclinux-dist Using alsa-lib-1.0.23 from http://www.alsa-project.org Two Cirrus Logic CS42448 CODECs connected to BF537 SPORT0 Primary and Secondary data lines in Multichannel mode CS42448 configured for TDM (32 bits per channel * 8 channels = 256 bits per frame) ICS661 Audio Clock at (256*48000Hz) connected to BF537 SPORT0 and Both CS42448 CODECs for bit clocking You can find the driver here: http://www.alcorn.com/ftp/swap/sound_cs42448.zip Thank you, Adam Adam Rosenberg Software Engineer Alcorn McBride Inc. 3300 South Hiawassee Building 105 Orlando, FL 32835 (407) 296 - 5800 ext. 5490

3 9

[alsa-devel] Notebook ASUS X5DE-EX068V statt 699,00 bei uns nur 349,00
by Notebook2000 07 Nov '10

07 Nov '10

Notebook2000 - Karlsplatz 3- München Der Herbst ist gekommen und die Preise werden reduziert. Viele neue Herbsstangebote (Fernseher, Notebooks, Handys, Haushaltsgeräte) im Sortiment. Die Artikel wurden bis zu 50 % reduziert. z.Bsp. Notebook ASUS X5DE-EX068V statt 699,00 bei uns nur 349,00 Unser vollständiges Sortiment finden Sie unter: www.Notebook2000.eu http://www.Notebook2000.eu Newsletter abbestellen: info.am.notebook2000(a)googlemail.com mailto:info.am.notebook2000@googlemail.com

1 0

[alsa-devel] [PATCH] ASoC: Lock the CODEC in PXA external jack controls
by Mark Brown 06 Nov '10

06 Nov '10

When doing anything with the system, especially DAPM, we need to hold the CODEC mutex. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/pxa/corgi.c | 5 +++++ sound/soc/pxa/magician.c | 4 ++++ sound/soc/pxa/poodle.c | 5 +++++ sound/soc/pxa/spitz.c | 5 +++++ sound/soc/pxa/tosa.c | 5 +++++ 5 files changed, 24 insertions(+), 0 deletions(-) diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 97e9423..f451acd 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -100,8 +100,13 @@ static int corgi_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ corgi_ext_control(codec); + + mutex_unlock(&codec->mutex); + return 0; } diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index b8207ce..5ef0526 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -72,9 +72,13 @@ static int magician_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ magician_ext_control(codec); + mutex_unlock(&codec->mutex); + return 0; } diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index af84ee9..84edd03 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -77,8 +77,13 @@ static int poodle_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ poodle_ext_control(codec); + + mutex_unlock(&codec->mutex); + return 0; } diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index f470f36..0b30d7d 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -108,8 +108,13 @@ static int spitz_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ spitz_ext_control(codec); + + mutex_unlock(&codec->mutex); + return 0; } diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index 73d0edd..7b983f9 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -81,8 +81,13 @@ static int tosa_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ tosa_ext_control(codec); + + mutex_unlock(&codec->mutex); + return 0; } -- 1.7.1

2 2

[alsa-devel] [PATCH] ASoC: WM8776: Removed unneeded struct member
by Dimitris Papastamos 06 Nov '10

06 Nov '10

The member reg_cache is not used at all and therefore it should be removed. This member was usually needed for older versions of ASoC that did not handle caching automatically and had to be done in the driver itself. Signed-off-by: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8776.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c index 04182c4..0132a27 100644 --- a/sound/soc/codecs/wm8776.c +++ b/sound/soc/codecs/wm8776.c @@ -34,7 +34,6 @@ /* codec private data */ struct wm8776_priv { enum snd_soc_control_type control_type; - u16 reg_cache[WM8776_CACHEREGNUM]; int sysclk[2]; }; -- 1.7.3.2

3 2

[alsa-devel] [PATCH] ASoC: core: Fix race in dapm_power_widgets
by Peter Ujfalusi 06 Nov '10

06 Nov '10

dapm_power_widgets can be called from different context. When two calls are happening at the same time both will try to change states/lists. This can lead to kernel crash. A simple way to reproduce the problem: while [ "1" = "1" ] ; do amixer sset -Dhw:0 -q 'Mixer for loopback' on amixer sset -Dhw:0 -q 'Mixer for loopback' off done & while [ "1" = "1" ] ; do aplay -Dplughw:0 -fdat -d 3 /dev/urandom echo "Playback finished" sleep 6 done & Add new card level mutex (dpw_mutex) to protect the dapm_power_widgets from race. The exisiting card->mutex can not be used for this purpose, since it has been taken in probe time in the snd_soc_instantiate_card function. Through probe calls from this function eventually dapm_power_widgets will be called, which will lead to dead lock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> --- include/sound/soc.h | 1 + sound/soc/soc-core.c | 1 + sound/soc/soc-dapm.c | 2 ++ 3 files changed, 4 insertions(+), 0 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 5c3bce8..c0175ab 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -563,6 +563,7 @@ struct snd_soc_card { struct list_head list; struct mutex mutex; + struct mutex dpw_mutex; /* To avoid dapm_power_widget race condition */ bool instantiated; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 614a8b3..8017afc 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2872,6 +2872,7 @@ static int snd_soc_register_card(struct snd_soc_card *card) INIT_LIST_HEAD(&card->list); card->instantiated = 0; mutex_init(&card->mutex); + mutex_init(&card->dpw_mutex); mutex_lock(&client_mutex); list_add(&card->list, &card_list); diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 7d85c64..89bfa37 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -902,6 +902,7 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event) /* Check which widgets we need to power and store them in * lists indicating if they should be powered up or down. */ + mutex_lock(&card->dpw_mutex); list_for_each_entry(w, &codec->dapm_widgets, list) { switch (w->id) { case snd_soc_dapm_pre: @@ -1009,6 +1010,7 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event) pop_dbg(codec->pop_time, "DAPM sequencing finished, waiting %dms\n", codec->pop_time); pop_wait(codec->pop_time); + mutex_unlock(&card->dpw_mutex); return 0; } -- 1.7.3.2

3 8

[alsa-devel] [PATCH v2] ASoC: WM8770: Initial driver
by Dimitris Papastamos 06 Nov '10

06 Nov '10

The WM8770 is a high performance, multi-channel audio codec. The WM8770 is ideal for surround sound processing applications for home hi-fi, automotive and other audio visual equipment. Signed-off-by: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm8770.c | 750 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8770.h | 51 +++ 4 files changed, 807 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm8770.c create mode 100644 sound/soc/codecs/wm8770.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e61fbab..6ebd3a6 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -58,6 +58,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI + select SND_SOC_WM8770 if SPI_MASTER select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8900 if I2C @@ -244,6 +245,9 @@ config SND_SOC_WM8750 config SND_SOC_WM8753 tristate +config SND_SOC_WM8770 + tristate + config SND_SOC_WM8776 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 0dcaed3..42f185d 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -42,6 +42,7 @@ snd-soc-wm8731-objs := wm8731.o snd-soc-wm8741-objs := wm8741.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o +snd-soc-wm8770-objs := wm8770.o snd-soc-wm8776-objs := wm8776.o snd-soc-wm8804-objs := wm8804.o snd-soc-wm8900-objs := wm8900.o @@ -118,6 +119,7 @@ obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o obj-$(CONFIG_SND_SOC_WM8741) += snd-soc-wm8741.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o +obj-$(CONFIG_SND_SOC_WM8770) += snd-soc-wm8770.o obj-$(CONFIG_SND_SOC_WM8776) += snd-soc-wm8776.o obj-$(CONFIG_SND_SOC_WM8804) += snd-soc-wm8804.o obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o diff --git a/sound/soc/codecs/wm8770.c b/sound/soc/codecs/wm8770.c new file mode 100644 index 0000000..463886c --- /dev/null +++ b/sound/soc/codecs/wm8770.c @@ -0,0 +1,750 @@ +/* + * wm8770.c -- WM8770 ALSA SoC Audio driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "wm8770.h" + +#define WM8770_NUM_SUPPLIES 3 +static const char *wm8770_supply_names[WM8770_NUM_SUPPLIES] = { + "AVDD1", + "AVDD2", + "DVDD" +}; + +static const u16 wm8770_reg_defs[WM8770_CACHEREGNUM] = { + 0x7f, 0x7f, 0x7f, 0x7f, + 0x7f, 0x7f, 0x7f, 0x7f, + 0x7f, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0, 0x90, 0, + 0, 0x22, 0x22, 0x3e, + 0xc, 0xc, 0x100, 0x189, + 0x189, 0x8770 +}; + +struct wm8770_priv { + enum snd_soc_control_type control_type; + struct regulator_bulk_data supplies[WM8770_NUM_SUPPLIES]; + struct notifier_block disable_nb[WM8770_NUM_SUPPLIES]; + struct snd_soc_codec *codec; + int sysclk; +}; + +static int vout12supply_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); +static int vout34supply_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); + +/* + * We can't use the same notifier block for more than one supply and + * there's no way I can see to get from a callback to the caller + * except container_of(). + */ +#define WM8770_REGULATOR_EVENT(n) \ +static int wm8770_regulator_event_##n(struct notifier_block *nb, \ + unsigned long event, void *data) \ +{ \ + struct wm8770_priv *wm8770 = container_of(nb, struct wm8770_priv, \ + disable_nb[n]); \ + if (event & REGULATOR_EVENT_DISABLE) { \ + wm8770->codec->cache_sync = 1; \ + } \ + return 0; \ +} + +WM8770_REGULATOR_EVENT(0) +WM8770_REGULATOR_EVENT(1) +WM8770_REGULATOR_EVENT(2) + +static const DECLARE_TLV_DB_SCALE(adc_tlv, -1200, 100, 0); +static const DECLARE_TLV_DB_SCALE(dac_dig_tlv, -12750, 50, 1); +static const DECLARE_TLV_DB_SCALE(dac_alg_tlv, -12700, 100, 1); + +static const char *dac_phase_text[][2] = { + { "DAC1 Normal", "DAC1 Inverted" }, + { "DAC2 Normal", "DAC2 Inverted" }, + { "DAC3 Normal", "DAC3 Inverted" }, + { "DAC4 Normal", "DAC4 Inverted" }, +}; + +static const struct soc_enum dac_phase[] = { + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 0, 1, 2, dac_phase_text[0]), + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 2, 3, 2, dac_phase_text[1]), + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 4, 5, 2, dac_phase_text[2]), + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 6, 7, 2, dac_phase_text[3]), +}; + +static const struct snd_kcontrol_new wm8770_snd_controls[] = { + /* global DAC playback controls */ + SOC_SINGLE_TLV("DAC Playback Volume", WM8770_MSDIGVOL, 0, 255, 0, + dac_dig_tlv), + SOC_SINGLE("DAC Playback Switch", WM8770_DACMUTE, 4, 1, 1), + SOC_SINGLE("DAC Playback ZC Switch", WM8770_DACCTRL1, 0, 1, 0), + + /* global VOUT playback controls */ + SOC_SINGLE_TLV("VOUT Playback Volume", WM8770_MSALGVOL, 0, 127, 0, + dac_alg_tlv), + SOC_SINGLE("VOUT Playback ZC Switch", WM8770_MSALGVOL, 7, 1, 0), + + /* VOUT1/2/3/4 specific controls */ + SOC_DOUBLE_R_TLV("VOUT1 Playback Volume", WM8770_VOUT1LVOL, + WM8770_VOUT1RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT1 Playback ZC Switch", WM8770_VOUT1LVOL, + WM8770_VOUT1RVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("VOUT2 Playback Volume", WM8770_VOUT2LVOL, + WM8770_VOUT2RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT2 Playback ZC Switch", WM8770_VOUT2LVOL, + WM8770_VOUT2RVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("VOUT3 Playback Volume", WM8770_VOUT3LVOL, + WM8770_VOUT3RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT3 Playback ZC Switch", WM8770_VOUT3LVOL, + WM8770_VOUT3RVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("VOUT4 Playback Volume", WM8770_VOUT4LVOL, + WM8770_VOUT4RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT4 Playback ZC Switch", WM8770_VOUT4LVOL, + WM8770_VOUT4RVOL, 7, 1, 0), + + /* DAC1/2/3/4 specific controls */ + SOC_DOUBLE_R_TLV("DAC1 Playback Volume", WM8770_DAC1LVOL, + WM8770_DAC1RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC1 Deemphasis Switch", WM8770_DACCTRL2, 0, 1, 0), + SOC_ENUM("DAC1 Phase", dac_phase[0]), + SOC_DOUBLE_R_TLV("DAC2 Playback Volume", WM8770_DAC2LVOL, + WM8770_DAC2RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC2 Deemphasis Switch", WM8770_DACCTRL2, 1, 1, 0), + SOC_ENUM("DAC2 Phase", dac_phase[1]), + SOC_DOUBLE_R_TLV("DAC3 Playback Volume", WM8770_DAC3LVOL, + WM8770_DAC3RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC3 Deemphasis Switch", WM8770_DACCTRL2, 2, 1, 0), + SOC_ENUM("DAC3 Phase", dac_phase[2]), + SOC_DOUBLE_R_TLV("DAC4 Playback Volume", WM8770_DAC4LVOL, + WM8770_DAC4RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC4 Deemphasis Switch", WM8770_DACCTRL2, 3, 1, 0), + SOC_ENUM("DAC4 Phase", dac_phase[3]), + + /* ADC specific controls */ + SOC_DOUBLE_R_TLV("Capture Volume", WM8770_ADCLCTRL, WM8770_ADCRCTRL, + 0, 31, 0, adc_tlv), + SOC_DOUBLE_R("Capture Switch", WM8770_ADCLCTRL, WM8770_ADCRCTRL, + 5, 1, 1), + + /* other controls */ + SOC_SINGLE("ADC 128x Oversampling Switch", WM8770_MSTRCTRL, 3, 1, 0), + SOC_SINGLE("ADC Highpass Filter Switch", WM8770_IFACECTRL, 8, 1, 1) +}; + +static const char *ain_text[] = { + "AIN1", "AIN2", "AIN3", "AIN4", + "AIN5", "AIN6", "AIN7", "AIN8" +}; + +static const struct soc_enum ain_enum = + SOC_ENUM_DOUBLE(WM8770_ADCMUX, 0, 4, 8, ain_text); + +static const struct snd_kcontrol_new ain_mux = + SOC_DAPM_ENUM("Capture Mux", ain_enum); + +static const struct snd_kcontrol_new vout1_mix_controls[] = { + SOC_DAPM_SINGLE("DAC1 Switch", WM8770_OUTMUX1, 0, 1, 0), + SOC_DAPM_SINGLE("AUX1 Switch", WM8770_OUTMUX1, 1, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX1, 2, 1, 0) +}; + +static const struct snd_kcontrol_new vout2_mix_controls[] = { + SOC_DAPM_SINGLE("DAC2 Switch", WM8770_OUTMUX1, 3, 1, 0), + SOC_DAPM_SINGLE("AUX2 Switch", WM8770_OUTMUX1, 4, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX1, 5, 1, 0) +}; + +static const struct snd_kcontrol_new vout3_mix_controls[] = { + SOC_DAPM_SINGLE("DAC3 Switch", WM8770_OUTMUX2, 0, 1, 0), + SOC_DAPM_SINGLE("AUX3 Switch", WM8770_OUTMUX2, 1, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX2, 2, 1, 0) +}; + +static const struct snd_kcontrol_new vout4_mix_controls[] = { + SOC_DAPM_SINGLE("DAC4 Switch", WM8770_OUTMUX2, 3, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX2, 4, 1, 0) +}; + +static const struct snd_soc_dapm_widget wm8770_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("AUX1"), + SND_SOC_DAPM_INPUT("AUX2"), + SND_SOC_DAPM_INPUT("AUX3"), + + SND_SOC_DAPM_INPUT("AIN1"), + SND_SOC_DAPM_INPUT("AIN2"), + SND_SOC_DAPM_INPUT("AIN3"), + SND_SOC_DAPM_INPUT("AIN4"), + SND_SOC_DAPM_INPUT("AIN5"), + SND_SOC_DAPM_INPUT("AIN6"), + SND_SOC_DAPM_INPUT("AIN7"), + SND_SOC_DAPM_INPUT("AIN8"), + + SND_SOC_DAPM_MUX("Capture Mux", WM8770_ADCMUX, 8, 1, &ain_mux), + + SND_SOC_DAPM_ADC("ADC", "Capture", WM8770_PWDNCTRL, 1, 1), + + SND_SOC_DAPM_DAC("DAC1", "Playback", WM8770_PWDNCTRL, 2, 1), + SND_SOC_DAPM_DAC("DAC2", "Playback", WM8770_PWDNCTRL, 3, 1), + SND_SOC_DAPM_DAC("DAC3", "Playback", WM8770_PWDNCTRL, 4, 1), + SND_SOC_DAPM_DAC("DAC4", "Playback", WM8770_PWDNCTRL, 5, 1), + + SND_SOC_DAPM_SUPPLY("VOUT12 Supply", SND_SOC_NOPM, 0, 0, + vout12supply_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_SUPPLY("VOUT34 Supply", SND_SOC_NOPM, 0, 0, + vout34supply_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + + SND_SOC_DAPM_MIXER("VOUT1 Mixer", SND_SOC_NOPM, 0, 0, + vout1_mix_controls, ARRAY_SIZE(vout1_mix_controls)), + SND_SOC_DAPM_MIXER("VOUT2 Mixer", SND_SOC_NOPM, 0, 0, + vout2_mix_controls, ARRAY_SIZE(vout2_mix_controls)), + SND_SOC_DAPM_MIXER("VOUT3 Mixer", SND_SOC_NOPM, 0, 0, + vout3_mix_controls, ARRAY_SIZE(vout3_mix_controls)), + SND_SOC_DAPM_MIXER("VOUT4 Mixer", SND_SOC_NOPM, 0, 0, + vout4_mix_controls, ARRAY_SIZE(vout4_mix_controls)), + + SND_SOC_DAPM_OUTPUT("VOUT1"), + SND_SOC_DAPM_OUTPUT("VOUT2"), + SND_SOC_DAPM_OUTPUT("VOUT3"), + SND_SOC_DAPM_OUTPUT("VOUT4") +}; + +static const struct snd_soc_dapm_route wm8770_intercon[] = { + { "Capture Mux", "AIN1", "AIN1" }, + { "Capture Mux", "AIN2", "AIN2" }, + { "Capture Mux", "AIN3", "AIN3" }, + { "Capture Mux", "AIN4", "AIN4" }, + { "Capture Mux", "AIN5", "AIN5" }, + { "Capture Mux", "AIN6", "AIN6" }, + { "Capture Mux", "AIN7", "AIN7" }, + { "Capture Mux", "AIN8", "AIN8" }, + + { "ADC", NULL, "Capture Mux" }, + + { "VOUT1 Mixer", NULL, "VOUT12 Supply" }, + { "VOUT1 Mixer", "DAC1 Switch", "DAC1" }, + { "VOUT1 Mixer", "AUX1 Switch", "AUX1" }, + { "VOUT1 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT2 Mixer", NULL, "VOUT12 Supply" }, + { "VOUT2 Mixer", "DAC2 Switch", "DAC2" }, + { "VOUT2 Mixer", "AUX2 Switch", "AUX2" }, + { "VOUT2 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT3 Mixer", NULL, "VOUT34 Supply" }, + { "VOUT3 Mixer", "DAC3 Switch", "DAC3" }, + { "VOUT3 Mixer", "AUX3 Switch", "AUX3" }, + { "VOUT3 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT4 Mixer", NULL, "VOUT34 Supply" }, + { "VOUT4 Mixer", "DAC4 Switch", "DAC4" }, + { "VOUT4 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT1", NULL, "VOUT1 Mixer" }, + { "VOUT2", NULL, "VOUT2 Mixer" }, + { "VOUT3", NULL, "VOUT3 Mixer" }, + { "VOUT4", NULL, "VOUT4 Mixer" } +}; + +static int vout12supply_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec; + + codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, WM8770_OUTMUX1, 0x180, 0); + break; + case SND_SOC_DAPM_POST_PMD: + snd_soc_update_bits(codec, WM8770_OUTMUX1, 0x180, 0x180); + break; + } + + return 0; +} + +static int vout34supply_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec; + + codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, WM8770_OUTMUX2, 0x180, 0); + break; + case SND_SOC_DAPM_POST_PMD: + snd_soc_update_bits(codec, WM8770_OUTMUX2, 0x180, 0x180); + break; + } + + return 0; +} + +static int wm8770_reset(struct snd_soc_codec *codec) +{ + return snd_soc_write(codec, WM8770_RESET, 0); +} + +static int wm8770_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec; + int iface, master; + + codec = dai->codec; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + master = 0x100; + break; + case SND_SOC_DAIFMT_CBS_CFS: + master = 0; + break; + default: + return -EINVAL; + } + + iface = 0; + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x2; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x1; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0xc; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x8; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x4; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, WM8770_IFACECTRL, 0xf, iface); + snd_soc_update_bits(codec, WM8770_MSTRCTRL, 0x100, master); + + return 0; +} + +static const int mclk_ratios[] = { + 128, + 192, + 256, + 384, + 512, + 768 +}; + +static int wm8770_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec; + struct wm8770_priv *wm8770; + int i; + int iface; + int shift; + int ratio; + + codec = dai->codec; + wm8770 = snd_soc_codec_get_drvdata(codec); + + iface = 0; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x10; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x20; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= 0x30; + break; + } + + switch (substream->stream) { + case SNDRV_PCM_STREAM_PLAYBACK: + i = 0; + shift = 4; + break; + case SNDRV_PCM_STREAM_CAPTURE: + i = 2; + shift = 0; + break; + default: + return -EINVAL; + } + + /* Only need to set MCLK/LRCLK ratio if we're master */ + if (snd_soc_read(codec, WM8770_MSTRCTRL) & 0x100) { + for (; i < ARRAY_SIZE(mclk_ratios); ++i) { + ratio = wm8770->sysclk / params_rate(params); + if (ratio == mclk_ratios[i]) + break; + } + + if (i == ARRAY_SIZE(mclk_ratios)) { + dev_err(codec->dev, + "Unable to configure MCLK ratio %d/%d\n", + wm8770->sysclk, params_rate(params)); + return -EINVAL; + } + + dev_dbg(codec->dev, "MCLK is %dfs\n", mclk_ratios[i]); + + snd_soc_update_bits(codec, WM8770_MSTRCTRL, 0x7 << shift, + i << shift); + } + + snd_soc_update_bits(codec, WM8770_IFACECTRL, 0x30, iface); + + return 0; +} + +static int wm8770_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec; + + codec = dai->codec; + return snd_soc_update_bits(codec, WM8770_DACMUTE, 0x10, + !!mute << 4); +} + +static int wm8770_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec; + struct wm8770_priv *wm8770; + + codec = dai->codec; + wm8770 = snd_soc_codec_get_drvdata(codec); + wm8770->sysclk = freq; + return 0; +} + +static void wm8770_sync_cache(struct snd_soc_codec *codec) +{ + int i; + u16 *cache; + + if (!codec->cache_sync) + return; + + codec->cache_only = 0; + cache = codec->reg_cache; + for (i = 0; i < codec->driver->reg_cache_size; i++) { + if (i == WM8770_RESET || cache[i] == wm8770_reg_defs[i]) + continue; + snd_soc_write(codec, i, cache[i]); + } + codec->cache_sync = 0; +} + +static int wm8770_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int ret; + struct wm8770_priv *wm8770; + + wm8770 = snd_soc_codec_get_drvdata(codec); + + switch (level) { + case SND_SOC_BIAS_ON: + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + ret = regulator_bulk_enable(ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + if (ret) { + dev_err(codec->dev, + "Failed to enable supplies: %d\n", + ret); + return ret; + } + wm8770_sync_cache(codec); + /* global powerup */ + snd_soc_write(codec, WM8770_PWDNCTRL, 0); + } + break; + case SND_SOC_BIAS_OFF: + /* global powerdown */ + snd_soc_write(codec, WM8770_PWDNCTRL, 1); + regulator_bulk_disable(ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + break; + } + + codec->bias_level = level; + return 0; +} + +#define WM8770_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8770_dai_ops = { + .digital_mute = wm8770_mute, + .hw_params = wm8770_hw_params, + .set_fmt = wm8770_set_fmt, + .set_sysclk = wm8770_set_sysclk, +}; + +static struct snd_soc_dai_driver wm8770_dai = { + .name = "wm8770-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = WM8770_FORMATS + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = WM8770_FORMATS + }, + .ops = &wm8770_dai_ops, + .symmetric_rates = 1 +}; + +#ifdef CONFIG_PM +static int wm8770_suspend(struct snd_soc_codec *codec, pm_message_t state) +{ + wm8770_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8770_resume(struct snd_soc_codec *codec) +{ + wm8770_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + return 0; +} +#else +#define wm8770_suspend NULL +#define wm8770_resume NULL +#endif + +static int wm8770_probe(struct snd_soc_codec *codec) +{ + struct wm8770_priv *wm8770; + int ret; + int i; + + wm8770 = snd_soc_codec_get_drvdata(codec); + wm8770->codec = codec; + + codec->idle_bias_off = 1; + + ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8770->control_type); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(wm8770->supplies); i++) + wm8770->supplies[i].supply = wm8770_supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + if (ret) { + dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + return ret; + } + + wm8770->disable_nb[0].notifier_call = wm8770_regulator_event_0; + wm8770->disable_nb[1].notifier_call = wm8770_regulator_event_1; + wm8770->disable_nb[2].notifier_call = wm8770_regulator_event_2; + + /* This should really be moved into the regulator core */ + for (i = 0; i < ARRAY_SIZE(wm8770->supplies); i++) { + ret = regulator_register_notifier(wm8770->supplies[i].consumer, + &wm8770->disable_nb[i]); + if (ret) { + dev_err(codec->dev, + "Failed to register regulator notifier: %d\n", + ret); + } + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + if (ret) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + goto err_reg_get; + } + + ret = wm8770_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset: %d\n", ret); + goto err_reg_enable; + } + + wm8770_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* latch the volume update bits */ + snd_soc_update_bits(codec, WM8770_MSDIGVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_MSALGVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT1RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT2RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT3RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT4RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC1RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC2RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC3RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC4RVOL, 0x100, 0x100); + + /* mute all DACs */ + snd_soc_update_bits(codec, WM8770_DACMUTE, 0x10, 0x10); + + snd_soc_add_controls(codec, wm8770_snd_controls, + ARRAY_SIZE(wm8770_snd_controls)); + snd_soc_dapm_new_controls(codec, wm8770_dapm_widgets, + ARRAY_SIZE(wm8770_dapm_widgets)); + snd_soc_dapm_add_routes(codec, wm8770_intercon, + ARRAY_SIZE(wm8770_intercon)); + return 0; + +err_reg_enable: + regulator_bulk_disable(ARRAY_SIZE(wm8770->supplies), wm8770->supplies); +err_reg_get: + regulator_bulk_free(ARRAY_SIZE(wm8770->supplies), wm8770->supplies); + return ret; +} + +static int wm8770_remove(struct snd_soc_codec *codec) +{ + struct wm8770_priv *wm8770; + int i; + + wm8770 = snd_soc_codec_get_drvdata(codec); + wm8770_set_bias_level(codec, SND_SOC_BIAS_OFF); + + for (i = 0; i < ARRAY_SIZE(wm8770->supplies); ++i) + regulator_unregister_notifier(wm8770->supplies[i].consumer, + &wm8770->disable_nb[i]); + regulator_bulk_free(ARRAY_SIZE(wm8770->supplies), wm8770->supplies); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_wm8770 = { + .probe = wm8770_probe, + .remove = wm8770_remove, + .suspend = wm8770_suspend, + .resume = wm8770_resume, + .set_bias_level = wm8770_set_bias_level, + .reg_cache_size = ARRAY_SIZE(wm8770_reg_defs), + .reg_word_size = sizeof (u16), + .reg_cache_default = wm8770_reg_defs +}; + +#if defined(CONFIG_SPI_MASTER) +static int __devinit wm8770_spi_probe(struct spi_device *spi) +{ + struct wm8770_priv *wm8770; + int ret; + + wm8770 = kzalloc(sizeof(struct wm8770_priv), GFP_KERNEL); + if (!wm8770) + return -ENOMEM; + + wm8770->control_type = SND_SOC_SPI; + spi_set_drvdata(spi, wm8770); + + ret = snd_soc_register_codec(&spi->dev, + &soc_codec_dev_wm8770, &wm8770_dai, 1); + if (ret < 0) + kfree(wm8770); + return ret; +} + +static int __devexit wm8770_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + kfree(spi_get_drvdata(spi)); + return 0; +} + +static struct spi_driver wm8770_spi_driver = { + .driver = { + .name = "wm8770", + .owner = THIS_MODULE, + }, + .probe = wm8770_spi_probe, + .remove = __devexit_p(wm8770_spi_remove) +}; +#endif + +static int __init wm8770_modinit(void) +{ + int ret = 0; + +#if defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&wm8770_spi_driver); + if (ret) { + printk(KERN_ERR "Failed to register wm8770 SPI driver: %d\n", + ret); + } +#endif + return ret; +} +module_init(wm8770_modinit); + +static void __exit wm8770_exit(void) +{ +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8770_spi_driver); +#endif +} +module_exit(wm8770_exit); + +MODULE_DESCRIPTION("ASoC WM8770 driver"); +MODULE_AUTHOR("Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8770.h b/sound/soc/codecs/wm8770.h new file mode 100644 index 0000000..5f1b3bd --- /dev/null +++ b/sound/soc/codecs/wm8770.h @@ -0,0 +1,51 @@ +/* + * wm8770.h -- WM8770 ASoC driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8770_H +#define _WM8770_H + +/* Registers */ +#define WM8770_VOUT1LVOL 0 +#define WM8770_VOUT1RVOL 0x1 +#define WM8770_VOUT2LVOL 0x2 +#define WM8770_VOUT2RVOL 0x3 +#define WM8770_VOUT3LVOL 0x4 +#define WM8770_VOUT3RVOL 0x5 +#define WM8770_VOUT4LVOL 0x6 +#define WM8770_VOUT4RVOL 0x7 +#define WM8770_MSALGVOL 0x8 +#define WM8770_DAC1LVOL 0x9 +#define WM8770_DAC1RVOL 0xa +#define WM8770_DAC2LVOL 0xb +#define WM8770_DAC2RVOL 0xc +#define WM8770_DAC3LVOL 0xd +#define WM8770_DAC3RVOL 0xe +#define WM8770_DAC4LVOL 0xf +#define WM8770_DAC4RVOL 0x10 +#define WM8770_MSDIGVOL 0x11 +#define WM8770_DACPHASE 0x12 +#define WM8770_DACCTRL1 0x13 +#define WM8770_DACMUTE 0x14 +#define WM8770_DACCTRL2 0x15 +#define WM8770_IFACECTRL 0x16 +#define WM8770_MSTRCTRL 0x17 +#define WM8770_PWDNCTRL 0x18 +#define WM8770_ADCLCTRL 0x19 +#define WM8770_ADCRCTRL 0x1a +#define WM8770_ADCMUX 0x1b +#define WM8770_OUTMUX1 0x1c +#define WM8770_OUTMUX2 0x1d +#define WM8770_RESET 0x31 + +#define WM8770_CACHEREGNUM 0x20 + +#endif -- 1.7.3.2

2 1

[alsa-devel] [PATCH 0/3] sound card dir under debugfs
by Jarkko Nikula 06 Nov '10

06 Nov '10

Hi Part of the cross-device discussion raised the question that should the pop time to be per card instead of per device. Here's the set that introduces card dir under debugs/asoc/ and moves codec dirs and dapm_pop_time there. This goes on top "ASoC: Decouple DAPM from CODECs". -- Jarkko

3 11

[alsa-devel] [PATCH] ASoC: WM8770: Initial driver
by Dimitris Papastamos 05 Nov '10

05 Nov '10

The WM8770 is a high performance, multi-channel audio codec. The WM8770 is ideal for surround sound processing applications for home hi-fi, automotive and other audio visual equipment. Signed-off-by: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm8770.c | 745 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8770.h | 51 +++ 4 files changed, 802 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm8770.c create mode 100644 sound/soc/codecs/wm8770.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e61fbab..6ebd3a6 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -58,6 +58,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI + select SND_SOC_WM8770 if SPI_MASTER select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8900 if I2C @@ -244,6 +245,9 @@ config SND_SOC_WM8750 config SND_SOC_WM8753 tristate +config SND_SOC_WM8770 + tristate + config SND_SOC_WM8776 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 0dcaed3..42f185d 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -42,6 +42,7 @@ snd-soc-wm8731-objs := wm8731.o snd-soc-wm8741-objs := wm8741.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o +snd-soc-wm8770-objs := wm8770.o snd-soc-wm8776-objs := wm8776.o snd-soc-wm8804-objs := wm8804.o snd-soc-wm8900-objs := wm8900.o @@ -118,6 +119,7 @@ obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o obj-$(CONFIG_SND_SOC_WM8741) += snd-soc-wm8741.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o +obj-$(CONFIG_SND_SOC_WM8770) += snd-soc-wm8770.o obj-$(CONFIG_SND_SOC_WM8776) += snd-soc-wm8776.o obj-$(CONFIG_SND_SOC_WM8804) += snd-soc-wm8804.o obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o diff --git a/sound/soc/codecs/wm8770.c b/sound/soc/codecs/wm8770.c new file mode 100644 index 0000000..d714fdc --- /dev/null +++ b/sound/soc/codecs/wm8770.c @@ -0,0 +1,745 @@ +/* + * wm8770.c -- WM8770 ALSA SoC Audio driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "wm8770.h" + +#define WM8770_NUM_SUPPLIES 3 +static const char *wm8770_supply_names[WM8770_NUM_SUPPLIES] = { + "AVDD1", + "AVDD2", + "DVDD" +}; + +static const u16 wm8770_reg_defs[WM8770_CACHEREGNUM] = { + 0x7f, 0x7f, 0x7f, 0x7f, + 0x7f, 0x7f, 0x7f, 0x7f, + 0x7f, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0, 0x90, 0, + 0, 0x22, 0x22, 0x3e, + 0xc, 0xc, 0x100, 0x189, + 0x189, 0x8770 +}; + +struct wm8770_priv { + enum snd_soc_control_type control_type; + struct regulator_bulk_data supplies[WM8770_NUM_SUPPLIES]; + struct notifier_block disable_nb[WM8770_NUM_SUPPLIES]; + struct snd_soc_codec *codec; + int sysclk; +}; + +static int vout12mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); +static int vout34mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); + +/* + * We can't use the same notifier block for more than one supply and + * there's no way I can see to get from a callback to the caller + * except container_of(). + */ +#define WM8770_REGULATOR_EVENT(n) \ +static int wm8770_regulator_event_##n(struct notifier_block *nb, \ + unsigned long event, void *data) \ +{ \ + struct wm8770_priv *wm8770 = container_of(nb, struct wm8770_priv, \ + disable_nb[n]); \ + if (event & REGULATOR_EVENT_DISABLE) { \ + wm8770->codec->cache_sync = 1; \ + } \ + return 0; \ +} + +WM8770_REGULATOR_EVENT(0) +WM8770_REGULATOR_EVENT(1) +WM8770_REGULATOR_EVENT(2) + +static const DECLARE_TLV_DB_SCALE(adc_tlv, -1200, 100, 0); +static const DECLARE_TLV_DB_SCALE(dac_dig_tlv, -12750, 50, 1); +static const DECLARE_TLV_DB_SCALE(dac_alg_tlv, -12700, 100, 1); + +static const char *dac_phase_text[][2] = { + { "DAC1 Normal", "DAC1 Inverted" }, + { "DAC2 Normal", "DAC2 Inverted" }, + { "DAC3 Normal", "DAC3 Inverted" }, + { "DAC4 Normal", "DAC4 Inverted" }, +}; + +static const struct soc_enum dac_phase[] = { + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 0, 1, 2, dac_phase_text[0]), + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 2, 3, 2, dac_phase_text[1]), + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 4, 5, 2, dac_phase_text[2]), + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 6, 7, 2, dac_phase_text[3]), +}; + +static const struct snd_kcontrol_new wm8770_snd_controls[] = { + /* global DAC playback controls */ + SOC_SINGLE_TLV("DAC Playback Volume", WM8770_MSDIGVOL, 0, 255, 0, + dac_dig_tlv), + SOC_SINGLE("DAC Playback Switch", WM8770_DACMUTE, 4, 1, 1), + SOC_SINGLE("DAC Playback ZC Switch", WM8770_DACCTRL1, 0, 1, 0), + + /* global VOUT playback controls */ + SOC_SINGLE_TLV("VOUT Playback Volume", WM8770_MSALGVOL, 0, 127, 0, + dac_alg_tlv), + SOC_SINGLE("VOUT Playback ZC Switch", WM8770_MSALGVOL, 7, 1, 0), + + /* VOUT1/2/3/4 specific controls */ + SOC_DOUBLE_R_TLV("VOUT1 Playback Volume", WM8770_VOUT1LVOL, + WM8770_VOUT1RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT1 Playback ZC Switch", WM8770_VOUT1LVOL, + WM8770_VOUT1RVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("VOUT2 Playback Volume", WM8770_VOUT2LVOL, + WM8770_VOUT2RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT2 Playback ZC Switch", WM8770_VOUT2LVOL, + WM8770_VOUT2RVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("VOUT3 Playback Volume", WM8770_VOUT3LVOL, + WM8770_VOUT3RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT3 Playback ZC Switch", WM8770_VOUT3LVOL, + WM8770_VOUT3RVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("VOUT4 Playback Volume", WM8770_VOUT4LVOL, + WM8770_VOUT4RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT4 Playback ZC Switch", WM8770_VOUT4LVOL, + WM8770_VOUT4RVOL, 7, 1, 0), + + /* DAC1/2/3/4 specific controls */ + SOC_DOUBLE_R_TLV("DAC1 Playback Volume", WM8770_DAC1LVOL, + WM8770_DAC1RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC1 Deemphasis Switch", WM8770_DACCTRL2, 0, 1, 0), + SOC_ENUM("DAC1 Phase", dac_phase[0]), + SOC_DOUBLE_R_TLV("DAC2 Playback Volume", WM8770_DAC2LVOL, + WM8770_DAC2RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC2 Deemphasis Switch", WM8770_DACCTRL2, 1, 1, 0), + SOC_ENUM("DAC2 Phase", dac_phase[1]), + SOC_DOUBLE_R_TLV("DAC3 Playback Volume", WM8770_DAC3LVOL, + WM8770_DAC3RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC3 Deemphasis Switch", WM8770_DACCTRL2, 2, 1, 0), + SOC_ENUM("DAC3 Phase", dac_phase[2]), + SOC_DOUBLE_R_TLV("DAC4 Playback Volume", WM8770_DAC4LVOL, + WM8770_DAC4RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC4 Deemphasis Switch", WM8770_DACCTRL2, 3, 1, 0), + SOC_ENUM("DAC4 Phase", dac_phase[3]), + + /* ADC specific controls */ + SOC_DOUBLE_R_TLV("Capture Volume", WM8770_ADCLCTRL, WM8770_ADCRCTRL, + 0, 31, 0, adc_tlv), + SOC_DOUBLE_R("Capture Switch", WM8770_ADCLCTRL, WM8770_ADCRCTRL, + 5, 1, 1), + + /* other controls */ + SOC_SINGLE("ADC 128x Oversampling Switch", WM8770_MSTRCTRL, 3, 1, 0), + SOC_SINGLE("ADC Highpass Filter Switch", WM8770_IFACECTRL, 8, 1, 1) +}; + +static const char *ain_text[] = { + "AIN1", "AIN2", "AIN3", "AIN4", + "AIN5", "AIN6", "AIN7", "AIN8" +}; + +static const struct soc_enum ain_enum = + SOC_ENUM_DOUBLE(WM8770_ADCMUX, 0, 4, 8, ain_text); + +static const struct snd_kcontrol_new ain_mux = + SOC_DAPM_ENUM("Capture Mux", ain_enum); + +static const struct snd_kcontrol_new vout1_mix_controls[] = { + SOC_DAPM_SINGLE("DAC1 Switch", WM8770_OUTMUX1, 0, 1, 0), + SOC_DAPM_SINGLE("AUX1 Switch", WM8770_OUTMUX1, 1, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX1, 2, 1, 0) +}; + +static const struct snd_kcontrol_new vout2_mix_controls[] = { + SOC_DAPM_SINGLE("DAC2 Switch", WM8770_OUTMUX1, 3, 1, 0), + SOC_DAPM_SINGLE("AUX2 Switch", WM8770_OUTMUX1, 4, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX1, 5, 1, 0) +}; + +static const struct snd_kcontrol_new vout3_mix_controls[] = { + SOC_DAPM_SINGLE("DAC3 Switch", WM8770_OUTMUX2, 0, 1, 0), + SOC_DAPM_SINGLE("AUX3 Switch", WM8770_OUTMUX2, 1, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX2, 2, 1, 0) +}; + +static const struct snd_kcontrol_new vout4_mix_controls[] = { + SOC_DAPM_SINGLE("DAC4 Switch", WM8770_OUTMUX2, 3, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX2, 4, 1, 0) +}; + +static const struct snd_soc_dapm_widget wm8770_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("AUX1"), + SND_SOC_DAPM_INPUT("AUX2"), + SND_SOC_DAPM_INPUT("AUX3"), + + SND_SOC_DAPM_INPUT("AIN1"), + SND_SOC_DAPM_INPUT("AIN2"), + SND_SOC_DAPM_INPUT("AIN3"), + SND_SOC_DAPM_INPUT("AIN4"), + SND_SOC_DAPM_INPUT("AIN5"), + SND_SOC_DAPM_INPUT("AIN6"), + SND_SOC_DAPM_INPUT("AIN7"), + SND_SOC_DAPM_INPUT("AIN8"), + + SND_SOC_DAPM_MUX("Capture Mux", WM8770_ADCMUX, 8, 1, &ain_mux), + + SND_SOC_DAPM_ADC("ADC", "Capture", WM8770_PWDNCTRL, 1, 1), + + SND_SOC_DAPM_DAC("DAC1", "Playback", WM8770_PWDNCTRL, 2, 1), + SND_SOC_DAPM_DAC("DAC2", "Playback", WM8770_PWDNCTRL, 3, 1), + SND_SOC_DAPM_DAC("DAC3", "Playback", WM8770_PWDNCTRL, 4, 1), + SND_SOC_DAPM_DAC("DAC4", "Playback", WM8770_PWDNCTRL, 5, 1), + + SND_SOC_DAPM_MIXER_E("VOUT1 Mixer", SND_SOC_NOPM, 0, 0, + vout1_mix_controls, ARRAY_SIZE(vout1_mix_controls), + vout12mixer_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_MIXER_E("VOUT2 Mixer", SND_SOC_NOPM, 0, 0, + vout2_mix_controls, ARRAY_SIZE(vout2_mix_controls), + vout12mixer_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_MIXER_E("VOUT3 Mixer", SND_SOC_NOPM, 0, 0, + vout3_mix_controls, ARRAY_SIZE(vout3_mix_controls), + vout34mixer_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_MIXER_E("VOUT4 Mixer", SND_SOC_NOPM, 0, 0, + vout4_mix_controls, ARRAY_SIZE(vout4_mix_controls), + vout34mixer_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_OUTPUT("VOUT1"), + SND_SOC_DAPM_OUTPUT("VOUT2"), + SND_SOC_DAPM_OUTPUT("VOUT3"), + SND_SOC_DAPM_OUTPUT("VOUT4") +}; + +static const struct snd_soc_dapm_route wm8770_intercon[] = { + { "Capture Mux", "AIN1", "AIN1" }, + { "Capture Mux", "AIN2", "AIN2" }, + { "Capture Mux", "AIN3", "AIN3" }, + { "Capture Mux", "AIN4", "AIN4" }, + { "Capture Mux", "AIN5", "AIN5" }, + { "Capture Mux", "AIN6", "AIN6" }, + { "Capture Mux", "AIN7", "AIN7" }, + { "Capture Mux", "AIN8", "AIN8" }, + + { "ADC", NULL, "Capture Mux" }, + + { "VOUT1 Mixer", "DAC1 Switch", "DAC1" }, + { "VOUT1 Mixer", "AUX1 Switch", "AUX1" }, + { "VOUT1 Mixer", "Bypass Switch", "Capture Mux" } + , + { "VOUT2 Mixer", "DAC2 Switch", "DAC2" }, + { "VOUT2 Mixer", "AUX2 Switch", "AUX2" }, + { "VOUT2 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT3 Mixer", "DAC3 Switch", "DAC3" }, + { "VOUT3 Mixer", "AUX3 Switch", "AUX3" }, + { "VOUT3 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT4 Mixer", "DAC4 Switch", "DAC4" }, + { "VOUT4 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT1", NULL, "VOUT1 Mixer" }, + { "VOUT2", NULL, "VOUT2 Mixer" }, + { "VOUT3", NULL, "VOUT3 Mixer" }, + { "VOUT4", NULL, "VOUT4 Mixer" } +}; + +static int vout12mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec; + + codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, WM8770_OUTMUX1, 0x180, 0); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, WM8770_OUTMUX1, 0x180, 0x180); + break; + } + + return 0; +} + +static int vout34mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec; + + codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, WM8770_OUTMUX2, 0x180, 0); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, WM8770_OUTMUX2, 0x180, 0x180); + break; + } + + return 0; +} + +static int wm8770_reset(struct snd_soc_codec *codec) +{ + return snd_soc_write(codec, WM8770_RESET, 0); +} + +static int wm8770_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec; + int iface, master; + + codec = dai->codec; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + master = 0x100; + break; + case SND_SOC_DAIFMT_CBS_CFS: + master = 0; + break; + default: + return -EINVAL; + } + + iface = 0; + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x2; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x1; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0xc; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x8; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x4; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, WM8770_IFACECTRL, 0xf, iface); + snd_soc_update_bits(codec, WM8770_MSTRCTRL, 0x100, master); + + return 0; +} + +static const int mclk_ratios[] = { + 128, + 192, + 256, + 384, + 512, + 768 +}; + +static int wm8770_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec; + struct wm8770_priv *wm8770; + int i; + int iface; + int shift; + int ratio; + + codec = dai->codec; + wm8770 = snd_soc_codec_get_drvdata(codec); + + iface = 0; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x10; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x20; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= 0x30; + break; + } + + switch (substream->stream) { + case SNDRV_PCM_STREAM_PLAYBACK: + i = 0; + shift = 4; + break; + case SNDRV_PCM_STREAM_CAPTURE: + i = 2; + shift = 0; + break; + default: + return -EINVAL; + } + + /* Only need to set MCLK/LRCLK ratio if we're master */ + if (snd_soc_read(codec, WM8770_MSTRCTRL) & 0x100) { + for (; i < ARRAY_SIZE(mclk_ratios); ++i) { + ratio = wm8770->sysclk / params_rate(params); + if (ratio == mclk_ratios[i]) + break; + } + + if (i == ARRAY_SIZE(mclk_ratios)) { + dev_err(codec->dev, + "Unable to configure MCLK ratio %d/%d\n", + wm8770->sysclk, params_rate(params)); + return -EINVAL; + } + + dev_dbg(codec->dev, "MCLK is %dfs\n", mclk_ratios[i]); + + snd_soc_update_bits(codec, WM8770_MSTRCTRL, 0x7 << shift, + i << shift); + } + + snd_soc_update_bits(codec, WM8770_IFACECTRL, 0x30, iface); + + return 0; +} + +static int wm8770_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec; + + codec = dai->codec; + return snd_soc_update_bits(codec, WM8770_DACMUTE, 0x10, + !!mute << 4); +} + +static int wm8770_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec; + struct wm8770_priv *wm8770; + + codec = dai->codec; + wm8770 = snd_soc_codec_get_drvdata(codec); + wm8770->sysclk = freq; + return 0; +} + +static void wm8770_sync_cache(struct snd_soc_codec *codec) +{ + int i; + u16 *cache; + + if (!codec->cache_sync) + return; + + codec->cache_only = 0; + cache = codec->reg_cache; + for (i = 0; i < codec->driver->reg_cache_size; i++) { + if (i == WM8770_RESET || cache[i] == wm8770_reg_defs[i]) + continue; + snd_soc_write(codec, i, cache[i]); + } + codec->cache_sync = 0; +} + +static int wm8770_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int ret; + struct wm8770_priv *wm8770; + + wm8770 = snd_soc_codec_get_drvdata(codec); + + switch (level) { + case SND_SOC_BIAS_ON: + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + ret = regulator_bulk_enable(ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + if (ret) { + dev_err(codec->dev, + "Failed to enable supplies: %d\n", + ret); + return ret; + } + wm8770_sync_cache(codec); + /* global powerup */ + snd_soc_write(codec, WM8770_PWDNCTRL, 0); + } + break; + case SND_SOC_BIAS_OFF: + /* global powerdown */ + snd_soc_write(codec, WM8770_PWDNCTRL, 1); + regulator_bulk_disable(ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + break; + } + + codec->bias_level = level; + return 0; +} + +#define WM8770_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8770_dai_ops = { + .digital_mute = wm8770_mute, + .hw_params = wm8770_hw_params, + .set_fmt = wm8770_set_fmt, + .set_sysclk = wm8770_set_sysclk, +}; + +static struct snd_soc_dai_driver wm8770_dai = { + .name = "wm8770-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = WM8770_FORMATS + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = WM8770_FORMATS + }, + .ops = &wm8770_dai_ops, + .symmetric_rates = 1 +}; + +#ifdef CONFIG_PM +static int wm8770_suspend(struct snd_soc_codec *codec, pm_message_t state) +{ + wm8770_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8770_resume(struct snd_soc_codec *codec) +{ + wm8770_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + return 0; +} +#else +#define wm8770_suspend NULL +#define wm8770_resume NULL +#endif + +static int wm8770_probe(struct snd_soc_codec *codec) +{ + struct wm8770_priv *wm8770; + int ret; + int i; + + wm8770 = snd_soc_codec_get_drvdata(codec); + wm8770->codec = codec; + + codec->idle_bias_off = 1; + + ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8770->control_type); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(wm8770->supplies); i++) + wm8770->supplies[i].supply = wm8770_supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + if (ret) { + dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + return ret; + } + + wm8770->disable_nb[0].notifier_call = wm8770_regulator_event_0; + wm8770->disable_nb[1].notifier_call = wm8770_regulator_event_1; + wm8770->disable_nb[2].notifier_call = wm8770_regulator_event_2; + + /* This should really be moved into the regulator core */ + for (i = 0; i < ARRAY_SIZE(wm8770->supplies); i++) { + ret = regulator_register_notifier(wm8770->supplies[i].consumer, + &wm8770->disable_nb[i]); + if (ret) { + dev_err(codec->dev, + "Failed to register regulator notifier: %d\n", + ret); + } + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + if (ret) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + goto err_reg_get; + } + + ret = wm8770_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset: %d\n", ret); + goto err_reg_enable; + } + + wm8770_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* latch the volume update bits */ + snd_soc_update_bits(codec, WM8770_MSDIGVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_MSALGVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT1RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT2RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT3RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT4RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC1RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC2RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC3RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC4RVOL, 0x100, 0x100); + + /* mute all DACs */ + snd_soc_update_bits(codec, WM8770_DACMUTE, 0x10, 0x10); + + snd_soc_add_controls(codec, wm8770_snd_controls, + ARRAY_SIZE(wm8770_snd_controls)); + snd_soc_dapm_new_controls(codec, wm8770_dapm_widgets, + ARRAY_SIZE(wm8770_dapm_widgets)); + snd_soc_dapm_add_routes(codec, wm8770_intercon, + ARRAY_SIZE(wm8770_intercon)); + return 0; + +err_reg_enable: + regulator_bulk_disable(ARRAY_SIZE(wm8770->supplies), wm8770->supplies); +err_reg_get: + regulator_bulk_free(ARRAY_SIZE(wm8770->supplies), wm8770->supplies); + return ret; +} + +static int wm8770_remove(struct snd_soc_codec *codec) +{ + struct wm8770_priv *wm8770; + int i; + + wm8770 = snd_soc_codec_get_drvdata(codec); + wm8770_set_bias_level(codec, SND_SOC_BIAS_OFF); + + for (i = 0; i < ARRAY_SIZE(wm8770->supplies); ++i) + regulator_unregister_notifier(wm8770->supplies[i].consumer, + &wm8770->disable_nb[i]); + regulator_bulk_free(ARRAY_SIZE(wm8770->supplies), wm8770->supplies); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_wm8770 = { + .probe = wm8770_probe, + .remove = wm8770_remove, + .suspend = wm8770_suspend, + .resume = wm8770_resume, + .set_bias_level = wm8770_set_bias_level, + .reg_cache_size = ARRAY_SIZE(wm8770_reg_defs), + .reg_word_size = sizeof (u16), + .reg_cache_default = wm8770_reg_defs +}; + +#if defined(CONFIG_SPI_MASTER) +static int __devinit wm8770_spi_probe(struct spi_device *spi) +{ + struct wm8770_priv *wm8770; + int ret; + + wm8770 = kzalloc(sizeof(struct wm8770_priv), GFP_KERNEL); + if (!wm8770) + return -ENOMEM; + + wm8770->control_type = SND_SOC_SPI; + spi_set_drvdata(spi, wm8770); + + ret = snd_soc_register_codec(&spi->dev, + &soc_codec_dev_wm8770, &wm8770_dai, 1); + if (ret < 0) + kfree(wm8770); + return ret; +} + +static int __devexit wm8770_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + kfree(spi_get_drvdata(spi)); + return 0; +} + +static struct spi_driver wm8770_spi_driver = { + .driver = { + .name = "wm8770", + .owner = THIS_MODULE, + }, + .probe = wm8770_spi_probe, + .remove = __devexit_p(wm8770_spi_remove) +}; +#endif + +static int __init wm8770_modinit(void) +{ + int ret = 0; + +#if defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&wm8770_spi_driver); + if (ret) { + printk(KERN_ERR "Failed to register wm8770 SPI driver: %d\n", + ret); + } +#endif + return ret; +} +module_init(wm8770_modinit); + +static void __exit wm8770_exit(void) +{ +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8770_spi_driver); +#endif +} +module_exit(wm8770_exit); + +MODULE_DESCRIPTION("ASoC WM8770 driver"); +MODULE_AUTHOR("Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8770.h b/sound/soc/codecs/wm8770.h new file mode 100644 index 0000000..5f1b3bd --- /dev/null +++ b/sound/soc/codecs/wm8770.h @@ -0,0 +1,51 @@ +/* + * wm8770.h -- WM8770 ASoC driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8770_H +#define _WM8770_H + +/* Registers */ +#define WM8770_VOUT1LVOL 0 +#define WM8770_VOUT1RVOL 0x1 +#define WM8770_VOUT2LVOL 0x2 +#define WM8770_VOUT2RVOL 0x3 +#define WM8770_VOUT3LVOL 0x4 +#define WM8770_VOUT3RVOL 0x5 +#define WM8770_VOUT4LVOL 0x6 +#define WM8770_VOUT4RVOL 0x7 +#define WM8770_MSALGVOL 0x8 +#define WM8770_DAC1LVOL 0x9 +#define WM8770_DAC1RVOL 0xa +#define WM8770_DAC2LVOL 0xb +#define WM8770_DAC2RVOL 0xc +#define WM8770_DAC3LVOL 0xd +#define WM8770_DAC3RVOL 0xe +#define WM8770_DAC4LVOL 0xf +#define WM8770_DAC4RVOL 0x10 +#define WM8770_MSDIGVOL 0x11 +#define WM8770_DACPHASE 0x12 +#define WM8770_DACCTRL1 0x13 +#define WM8770_DACMUTE 0x14 +#define WM8770_DACCTRL2 0x15 +#define WM8770_IFACECTRL 0x16 +#define WM8770_MSTRCTRL 0x17 +#define WM8770_PWDNCTRL 0x18 +#define WM8770_ADCLCTRL 0x19 +#define WM8770_ADCRCTRL 0x1a +#define WM8770_ADCMUX 0x1b +#define WM8770_OUTMUX1 0x1c +#define WM8770_OUTMUX2 0x1d +#define WM8770_RESET 0x31 + +#define WM8770_CACHEREGNUM 0x20 + +#endif -- 1.7.3.2

2 1

[alsa-devel] [PATCH] ASoC: WM8770: Initial driver
by Dimitris Papastamos 05 Nov '10

05 Nov '10

The WM8770 is a high performance, multi-channel audio codec. The WM8770 is ideal for surround sound processing applications for home hi-fi, automotive and other audio visual equipment. Signed-off-by: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm8770.c | 745 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8770.h | 51 +++ 4 files changed, 802 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm8770.c create mode 100644 sound/soc/codecs/wm8770.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e61fbab..6ebd3a6 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -58,6 +58,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI + select SND_SOC_WM8770 if SPI_MASTER select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8900 if I2C @@ -244,6 +245,9 @@ config SND_SOC_WM8750 config SND_SOC_WM8753 tristate +config SND_SOC_WM8770 + tristate + config SND_SOC_WM8776 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 0dcaed3..42f185d 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -42,6 +42,7 @@ snd-soc-wm8731-objs := wm8731.o snd-soc-wm8741-objs := wm8741.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o +snd-soc-wm8770-objs := wm8770.o snd-soc-wm8776-objs := wm8776.o snd-soc-wm8804-objs := wm8804.o snd-soc-wm8900-objs := wm8900.o @@ -118,6 +119,7 @@ obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o obj-$(CONFIG_SND_SOC_WM8741) += snd-soc-wm8741.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o +obj-$(CONFIG_SND_SOC_WM8770) += snd-soc-wm8770.o obj-$(CONFIG_SND_SOC_WM8776) += snd-soc-wm8776.o obj-$(CONFIG_SND_SOC_WM8804) += snd-soc-wm8804.o obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o diff --git a/sound/soc/codecs/wm8770.c b/sound/soc/codecs/wm8770.c new file mode 100644 index 0000000..b4ad855 --- /dev/null +++ b/sound/soc/codecs/wm8770.c @@ -0,0 +1,745 @@ +/* + * wm8770.c -- WM8770 ALSA SoC Audio driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "wm8770.h" + +#define WM8770_NUM_SUPPLIES 3 +static const char *wm8770_supply_names[WM8770_NUM_SUPPLIES] = { + "AVDD1", + "AVDD2", + "DVDD" +}; + +static const u16 wm8770_reg_defs[WM8770_CACHEREGNUM] = { + 0x7f, 0x7f, 0x7f, 0x7f, + 0x7f, 0x7f, 0x7f, 0x7f, + 0x7f, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0, 0x90, 0, + 0, 0x22, 0x22, 0x3e, + 0xc, 0xc, 0x100, 0x189, + 0x189, 0x8770 +}; + +struct wm8770_priv { + enum snd_soc_control_type control_type; + struct regulator_bulk_data supplies[WM8770_NUM_SUPPLIES]; + struct notifier_block disable_nb[WM8770_NUM_SUPPLIES]; + struct snd_soc_codec *codec; + int sysclk; +}; + +static int vout12mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); +static int vout23mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); + +/* + * We can't use the same notifier block for more than one supply and + * there's no way I can see to get from a callback to the caller + * except container_of(). + */ +#define WM8770_REGULATOR_EVENT(n) \ +static int wm8770_regulator_event_##n(struct notifier_block *nb, \ + unsigned long event, void *data) \ +{ \ + struct wm8770_priv *wm8770 = container_of(nb, struct wm8770_priv, \ + disable_nb[n]); \ + if (event & REGULATOR_EVENT_DISABLE) { \ + wm8770->codec->cache_sync = 1; \ + } \ + return 0; \ +} + +WM8770_REGULATOR_EVENT(0) +WM8770_REGULATOR_EVENT(1) +WM8770_REGULATOR_EVENT(2) + +static const DECLARE_TLV_DB_SCALE(adc_tlv, -1200, 100, 0); +static const DECLARE_TLV_DB_SCALE(dac_dig_tlv, -12750, 50, 1); +static const DECLARE_TLV_DB_SCALE(dac_alg_tlv, -12700, 100, 1); + +static const char *dac_phase_text[][2] = { + { "DAC1 Normal", "DAC1 Inverted" }, + { "DAC2 Normal", "DAC2 Inverted" }, + { "DAC3 Normal", "DAC3 Inverted" }, + { "DAC4 Normal", "DAC4 Inverted" }, +}; + +static const struct soc_enum dac_phase[] = { + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 0, 1, 2, dac_phase_text[0]), + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 2, 3, 2, dac_phase_text[1]), + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 4, 5, 2, dac_phase_text[2]), + SOC_ENUM_DOUBLE(WM8770_DACPHASE, 6, 7, 2, dac_phase_text[3]), +}; + +static const struct snd_kcontrol_new wm8770_snd_controls[] = { + /* global DAC playback controls */ + SOC_SINGLE_TLV("DAC Playback Volume", WM8770_MSDIGVOL, 0, 255, 0, + dac_dig_tlv), + SOC_SINGLE("DAC Playback Switch", WM8770_DACMUTE, 4, 1, 1), + SOC_SINGLE("DAC Playback ZC Switch", WM8770_DACCTRL1, 0, 1, 0), + + /* global VOUT playback controls */ + SOC_SINGLE_TLV("VOUT Playback Volume", WM8770_MSALGVOL, 0, 127, 0, + dac_alg_tlv), + SOC_SINGLE("VOUT Playback ZC Switch", WM8770_MSALGVOL, 7, 1, 0), + + /* VOUT1/2/3/4 specific controls */ + SOC_DOUBLE_R_TLV("VOUT1 Playback Volume", WM8770_VOUT1LVOL, + WM8770_VOUT1RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT1 Playback ZC Switch", WM8770_VOUT1LVOL, + WM8770_VOUT1RVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("VOUT2 Playback Volume", WM8770_VOUT2LVOL, + WM8770_VOUT2RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT2 Playback ZC Switch", WM8770_VOUT2LVOL, + WM8770_VOUT2RVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("VOUT3 Playback Volume", WM8770_VOUT3LVOL, + WM8770_VOUT3RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT3 Playback ZC Switch", WM8770_VOUT3LVOL, + WM8770_VOUT3RVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("VOUT4 Playback Volume", WM8770_VOUT4LVOL, + WM8770_VOUT4RVOL, 0, 127, 0, dac_alg_tlv), + SOC_DOUBLE_R("VOUT4 Playback ZC Switch", WM8770_VOUT4LVOL, + WM8770_VOUT4RVOL, 7, 1, 0), + + /* DAC1/2/3/4 specific controls */ + SOC_DOUBLE_R_TLV("DAC1 Playback Volume", WM8770_DAC1LVOL, + WM8770_DAC1RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC1 Deemphasis Switch", WM8770_DACCTRL2, 0, 1, 0), + SOC_ENUM("DAC1 Phase", dac_phase[0]), + SOC_DOUBLE_R_TLV("DAC2 Playback Volume", WM8770_DAC2LVOL, + WM8770_DAC2RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC2 Deemphasis Switch", WM8770_DACCTRL2, 1, 1, 0), + SOC_ENUM("DAC2 Phase", dac_phase[1]), + SOC_DOUBLE_R_TLV("DAC3 Playback Volume", WM8770_DAC3LVOL, + WM8770_DAC3RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC3 Deemphasis Switch", WM8770_DACCTRL2, 2, 1, 0), + SOC_ENUM("DAC3 Phase", dac_phase[2]), + SOC_DOUBLE_R_TLV("DAC4 Playback Volume", WM8770_DAC4LVOL, + WM8770_DAC4RVOL, 0, 255, 0, dac_dig_tlv), + SOC_SINGLE("DAC4 Deemphasis Switch", WM8770_DACCTRL2, 3, 1, 0), + SOC_ENUM("DAC4 Phase", dac_phase[3]), + + /* ADC specific controls */ + SOC_DOUBLE_R_TLV("Capture Volume", WM8770_ADCLCTRL, WM8770_ADCRCTRL, + 0, 31, 0, adc_tlv), + SOC_DOUBLE_R("Capture Switch", WM8770_ADCLCTRL, WM8770_ADCRCTRL, + 5, 1, 1), + + /* other controls */ + SOC_SINGLE("ADC 128x Oversampling Switch", WM8770_MSTRCTRL, 3, 1, 0), + SOC_SINGLE("ADC Highpass Filter Switch", WM8770_IFACECTRL, 8, 1, 1) +}; + +static const char *ain_text[] = { + "AIN1", "AIN2", "AIN3", "AIN4", + "AIN5", "AIN6", "AIN7", "AIN8" +}; + +static const struct soc_enum ain_enum = + SOC_ENUM_DOUBLE(WM8770_ADCMUX, 0, 4, 8, ain_text); + +static const struct snd_kcontrol_new ain_mux = + SOC_DAPM_ENUM("Capture Mux", ain_enum); + +static const struct snd_kcontrol_new vout1_mix_controls[] = { + SOC_DAPM_SINGLE("DAC1 Switch", WM8770_OUTMUX1, 0, 1, 0), + SOC_DAPM_SINGLE("AUX1 Switch", WM8770_OUTMUX1, 1, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX1, 2, 1, 0) +}; + +static const struct snd_kcontrol_new vout2_mix_controls[] = { + SOC_DAPM_SINGLE("DAC2 Switch", WM8770_OUTMUX1, 3, 1, 0), + SOC_DAPM_SINGLE("AUX2 Switch", WM8770_OUTMUX1, 4, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX1, 5, 1, 0) +}; + +static const struct snd_kcontrol_new vout3_mix_controls[] = { + SOC_DAPM_SINGLE("DAC3 Switch", WM8770_OUTMUX2, 0, 1, 0), + SOC_DAPM_SINGLE("AUX3 Switch", WM8770_OUTMUX2, 1, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX2, 2, 1, 0) +}; + +static const struct snd_kcontrol_new vout4_mix_controls[] = { + SOC_DAPM_SINGLE("DAC4 Switch", WM8770_OUTMUX2, 3, 1, 0), + SOC_DAPM_SINGLE("Bypass Switch", WM8770_OUTMUX2, 4, 1, 0) +}; + +static const struct snd_soc_dapm_widget wm8770_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("AUX1"), + SND_SOC_DAPM_INPUT("AUX2"), + SND_SOC_DAPM_INPUT("AUX3"), + + SND_SOC_DAPM_INPUT("AIN1"), + SND_SOC_DAPM_INPUT("AIN2"), + SND_SOC_DAPM_INPUT("AIN3"), + SND_SOC_DAPM_INPUT("AIN4"), + SND_SOC_DAPM_INPUT("AIN5"), + SND_SOC_DAPM_INPUT("AIN6"), + SND_SOC_DAPM_INPUT("AIN7"), + SND_SOC_DAPM_INPUT("AIN8"), + + SND_SOC_DAPM_MUX("Capture Mux", WM8770_ADCMUX, 8, 1, &ain_mux), + + SND_SOC_DAPM_ADC("ADC", "Capture", WM8770_PWDNCTRL, 1, 1), + + SND_SOC_DAPM_DAC("DAC1", "Playback", WM8770_PWDNCTRL, 2, 1), + SND_SOC_DAPM_DAC("DAC2", "Playback", WM8770_PWDNCTRL, 3, 1), + SND_SOC_DAPM_DAC("DAC3", "Playback", WM8770_PWDNCTRL, 4, 1), + SND_SOC_DAPM_DAC("DAC4", "Playback", WM8770_PWDNCTRL, 5, 1), + + SND_SOC_DAPM_MIXER_E("VOUT1 Mixer", SND_SOC_NOPM, 0, 0, + vout1_mix_controls, ARRAY_SIZE(vout1_mix_controls), + vout12mixer_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_MIXER_E("VOUT2 Mixer", SND_SOC_NOPM, 0, 0, + vout2_mix_controls, ARRAY_SIZE(vout2_mix_controls), + vout12mixer_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_MIXER_E("VOUT3 Mixer", SND_SOC_NOPM, 0, 0, + vout3_mix_controls, ARRAY_SIZE(vout3_mix_controls), + vout23mixer_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_MIXER_E("VOUT4 Mixer", SND_SOC_NOPM, 0, 0, + vout4_mix_controls, ARRAY_SIZE(vout4_mix_controls), + vout23mixer_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_OUTPUT("VOUT1"), + SND_SOC_DAPM_OUTPUT("VOUT2"), + SND_SOC_DAPM_OUTPUT("VOUT3"), + SND_SOC_DAPM_OUTPUT("VOUT4") +}; + +static const struct snd_soc_dapm_route wm8770_intercon[] = { + { "Capture Mux", "AIN1", "AIN1" }, + { "Capture Mux", "AIN2", "AIN2" }, + { "Capture Mux", "AIN3", "AIN3" }, + { "Capture Mux", "AIN4", "AIN4" }, + { "Capture Mux", "AIN5", "AIN5" }, + { "Capture Mux", "AIN6", "AIN6" }, + { "Capture Mux", "AIN7", "AIN7" }, + { "Capture Mux", "AIN8", "AIN8" }, + + { "ADC", NULL, "Capture Mux" }, + + { "VOUT1 Mixer", "DAC1 Switch", "DAC1" }, + { "VOUT1 Mixer", "AUX1 Switch", "AUX1" }, + { "VOUT1 Mixer", "Bypass Switch", "Capture Mux" } + , + { "VOUT2 Mixer", "DAC2 Switch", "DAC2" }, + { "VOUT2 Mixer", "AUX2 Switch", "AUX2" }, + { "VOUT2 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT3 Mixer", "DAC3 Switch", "DAC3" }, + { "VOUT3 Mixer", "AUX3 Switch", "AUX3" }, + { "VOUT3 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT4 Mixer", "DAC4 Switch", "DAC4" }, + { "VOUT4 Mixer", "Bypass Switch", "Capture Mux" }, + + { "VOUT1", NULL, "VOUT1 Mixer" }, + { "VOUT2", NULL, "VOUT2 Mixer" }, + { "VOUT3", NULL, "VOUT3 Mixer" }, + { "VOUT4", NULL, "VOUT4 Mixer" } +}; + +static int vout12mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec; + + codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, WM8770_OUTMUX1, 0x180, 0); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, WM8770_OUTMUX1, 0x180, 0x180); + break; + } + + return 0; +} + +static int vout23mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec; + + codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, WM8770_OUTMUX2, 0x180, 0); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, WM8770_OUTMUX2, 0x180, 0x180); + break; + } + + return 0; +} + +static int wm8770_reset(struct snd_soc_codec *codec) +{ + return snd_soc_write(codec, WM8770_RESET, 0); +} + +static int wm8770_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec; + int iface, master; + + codec = dai->codec; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + master = 0x100; + break; + case SND_SOC_DAIFMT_CBS_CFS: + master = 0; + break; + default: + return -EINVAL; + } + + iface = 0; + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x2; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x1; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0xc; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x8; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x4; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, WM8770_IFACECTRL, 0xf, iface); + snd_soc_update_bits(codec, WM8770_MSTRCTRL, 0x100, master); + + return 0; +} + +static const int mclk_ratios[] = { + 128, + 192, + 256, + 384, + 512, + 768 +}; + +static int wm8770_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec; + struct wm8770_priv *wm8770; + int i; + int iface; + int shift; + int ratio; + + codec = dai->codec; + wm8770 = snd_soc_codec_get_drvdata(codec); + + iface = 0; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x10; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x20; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= 0x30; + break; + } + + switch (substream->stream) { + case SNDRV_PCM_STREAM_PLAYBACK: + i = 0; + shift = 4; + break; + case SNDRV_PCM_STREAM_CAPTURE: + i = 2; + shift = 0; + break; + default: + return -EINVAL; + } + + /* Only need to set MCLK/LRCLK ratio if we're master */ + if (snd_soc_read(codec, WM8770_MSTRCTRL) & 0x100) { + for (; i < ARRAY_SIZE(mclk_ratios); ++i) { + ratio = wm8770->sysclk / params_rate(params); + if (ratio == mclk_ratios[i]) + break; + } + + if (i == ARRAY_SIZE(mclk_ratios)) { + dev_err(codec->dev, + "Unable to configure MCLK ratio %d/%d\n", + wm8770->sysclk, params_rate(params)); + return -EINVAL; + } + + dev_dbg(codec->dev, "MCLK is %dfs\n", mclk_ratios[i]); + + snd_soc_update_bits(codec, WM8770_MSTRCTRL, 0x7 << shift, + i << shift); + } + + snd_soc_update_bits(codec, WM8770_IFACECTRL, 0x30, iface); + + return 0; +} + +static int wm8770_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec; + + codec = dai->codec; + return snd_soc_update_bits(codec, WM8770_DACMUTE, 0x10, + !!mute << 4); +} + +static int wm8770_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec; + struct wm8770_priv *wm8770; + + codec = dai->codec; + wm8770 = snd_soc_codec_get_drvdata(codec); + wm8770->sysclk = freq; + return 0; +} + +static void wm8770_sync_cache(struct snd_soc_codec *codec) +{ + int i; + u16 *cache; + + if (!codec->cache_sync) + return; + + codec->cache_only = 0; + cache = codec->reg_cache; + for (i = 0; i < codec->driver->reg_cache_size; i++) { + if (i == WM8770_RESET || cache[i] == wm8770_reg_defs[i]) + continue; + snd_soc_write(codec, i, cache[i]); + } + codec->cache_sync = 0; +} + +static int wm8770_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int ret; + struct wm8770_priv *wm8770; + + wm8770 = snd_soc_codec_get_drvdata(codec); + + switch (level) { + case SND_SOC_BIAS_ON: + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + ret = regulator_bulk_enable(ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + if (ret) { + dev_err(codec->dev, + "Failed to enable supplies: %d\n", + ret); + return ret; + } + wm8770_sync_cache(codec); + /* global powerup */ + snd_soc_write(codec, WM8770_PWDNCTRL, 0); + } + break; + case SND_SOC_BIAS_OFF: + /* global powerdown */ + snd_soc_write(codec, WM8770_PWDNCTRL, 1); + regulator_bulk_disable(ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + break; + } + + codec->bias_level = level; + return 0; +} + +#define WM8770_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8770_dai_ops = { + .digital_mute = wm8770_mute, + .hw_params = wm8770_hw_params, + .set_fmt = wm8770_set_fmt, + .set_sysclk = wm8770_set_sysclk, +}; + +static struct snd_soc_dai_driver wm8770_dai = { + .name = "wm8770-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = WM8770_FORMATS + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = WM8770_FORMATS + }, + .ops = &wm8770_dai_ops, + .symmetric_rates = 1 +}; + +#ifdef CONFIG_PM +static int wm8770_suspend(struct snd_soc_codec *codec, pm_message_t state) +{ + wm8770_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8770_resume(struct snd_soc_codec *codec) +{ + wm8770_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + return 0; +} +#else +#define wm8770_suspend NULL +#define wm8770_resume NULL +#endif + +static int wm8770_probe(struct snd_soc_codec *codec) +{ + struct wm8770_priv *wm8770; + int ret; + int i; + + wm8770 = snd_soc_codec_get_drvdata(codec); + wm8770->codec = codec; + + codec->idle_bias_off = 1; + + ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8770->control_type); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(wm8770->supplies); i++) + wm8770->supplies[i].supply = wm8770_supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + if (ret) { + dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + return ret; + } + + wm8770->disable_nb[0].notifier_call = wm8770_regulator_event_0; + wm8770->disable_nb[1].notifier_call = wm8770_regulator_event_1; + wm8770->disable_nb[2].notifier_call = wm8770_regulator_event_2; + + /* This should really be moved into the regulator core */ + for (i = 0; i < ARRAY_SIZE(wm8770->supplies); i++) { + ret = regulator_register_notifier(wm8770->supplies[i].consumer, + &wm8770->disable_nb[i]); + if (ret) { + dev_err(codec->dev, + "Failed to register regulator notifier: %d\n", + ret); + } + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8770->supplies), + wm8770->supplies); + if (ret) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + goto err_reg_get; + } + + ret = wm8770_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset: %d\n", ret); + goto err_reg_enable; + } + + wm8770_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* latch the volume update bits */ + snd_soc_update_bits(codec, WM8770_MSDIGVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_MSALGVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT1RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT2RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT3RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_VOUT4RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC1RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC2RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC3RVOL, 0x100, 0x100); + snd_soc_update_bits(codec, WM8770_DAC4RVOL, 0x100, 0x100); + + /* mute all DACs */ + snd_soc_update_bits(codec, WM8770_DACMUTE, 0x10, 0x10); + + snd_soc_add_controls(codec, wm8770_snd_controls, + ARRAY_SIZE(wm8770_snd_controls)); + snd_soc_dapm_new_controls(codec, wm8770_dapm_widgets, + ARRAY_SIZE(wm8770_dapm_widgets)); + snd_soc_dapm_add_routes(codec, wm8770_intercon, + ARRAY_SIZE(wm8770_intercon)); + return 0; + +err_reg_enable: + regulator_bulk_disable(ARRAY_SIZE(wm8770->supplies), wm8770->supplies); +err_reg_get: + regulator_bulk_free(ARRAY_SIZE(wm8770->supplies), wm8770->supplies); + return ret; +} + +static int wm8770_remove(struct snd_soc_codec *codec) +{ + struct wm8770_priv *wm8770; + int i; + + wm8770 = snd_soc_codec_get_drvdata(codec); + wm8770_set_bias_level(codec, SND_SOC_BIAS_OFF); + + for (i = 0; i < ARRAY_SIZE(wm8770->supplies); ++i) + regulator_unregister_notifier(wm8770->supplies[i].consumer, + &wm8770->disable_nb[i]); + regulator_bulk_free(ARRAY_SIZE(wm8770->supplies), wm8770->supplies); + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_wm8770 = { + .probe = wm8770_probe, + .remove = wm8770_remove, + .suspend = wm8770_suspend, + .resume = wm8770_resume, + .set_bias_level = wm8770_set_bias_level, + .reg_cache_size = ARRAY_SIZE(wm8770_reg_defs), + .reg_word_size = sizeof (u16), + .reg_cache_default = wm8770_reg_defs +}; + +#if defined(CONFIG_SPI_MASTER) +static int __devinit wm8770_spi_probe(struct spi_device *spi) +{ + struct wm8770_priv *wm8770; + int ret; + + wm8770 = kzalloc(sizeof(struct wm8770_priv), GFP_KERNEL); + if (!wm8770) + return -ENOMEM; + + wm8770->control_type = SND_SOC_SPI; + spi_set_drvdata(spi, wm8770); + + ret = snd_soc_register_codec(&spi->dev, + &soc_codec_dev_wm8770, &wm8770_dai, 1); + if (ret < 0) + kfree(wm8770); + return ret; +} + +static int __devexit wm8770_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + kfree(spi_get_drvdata(spi)); + return 0; +} + +static struct spi_driver wm8770_spi_driver = { + .driver = { + .name = "wm8770", + .owner = THIS_MODULE, + }, + .probe = wm8770_spi_probe, + .remove = __devexit_p(wm8770_spi_remove) +}; +#endif + +static int __init wm8770_modinit(void) +{ + int ret = 0; + +#if defined(CONFIG_SPI_MASTER) + ret = spi_register_driver(&wm8770_spi_driver); + if (ret) { + printk(KERN_ERR "Failed to register wm8770 SPI driver: %d\n", + ret); + } +#endif + return ret; +} +module_init(wm8770_modinit); + +static void __exit wm8770_exit(void) +{ +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8770_spi_driver); +#endif +} +module_exit(wm8770_exit); + +MODULE_DESCRIPTION("ASoC WM8770 driver"); +MODULE_AUTHOR("Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8770.h b/sound/soc/codecs/wm8770.h new file mode 100644 index 0000000..5f1b3bd --- /dev/null +++ b/sound/soc/codecs/wm8770.h @@ -0,0 +1,51 @@ +/* + * wm8770.h -- WM8770 ASoC driver + * + * Copyright 2010 Wolfson Microelectronics plc + * + * Author: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8770_H +#define _WM8770_H + +/* Registers */ +#define WM8770_VOUT1LVOL 0 +#define WM8770_VOUT1RVOL 0x1 +#define WM8770_VOUT2LVOL 0x2 +#define WM8770_VOUT2RVOL 0x3 +#define WM8770_VOUT3LVOL 0x4 +#define WM8770_VOUT3RVOL 0x5 +#define WM8770_VOUT4LVOL 0x6 +#define WM8770_VOUT4RVOL 0x7 +#define WM8770_MSALGVOL 0x8 +#define WM8770_DAC1LVOL 0x9 +#define WM8770_DAC1RVOL 0xa +#define WM8770_DAC2LVOL 0xb +#define WM8770_DAC2RVOL 0xc +#define WM8770_DAC3LVOL 0xd +#define WM8770_DAC3RVOL 0xe +#define WM8770_DAC4LVOL 0xf +#define WM8770_DAC4RVOL 0x10 +#define WM8770_MSDIGVOL 0x11 +#define WM8770_DACPHASE 0x12 +#define WM8770_DACCTRL1 0x13 +#define WM8770_DACMUTE 0x14 +#define WM8770_DACCTRL2 0x15 +#define WM8770_IFACECTRL 0x16 +#define WM8770_MSTRCTRL 0x17 +#define WM8770_PWDNCTRL 0x18 +#define WM8770_ADCLCTRL 0x19 +#define WM8770_ADCRCTRL 0x1a +#define WM8770_ADCMUX 0x1b +#define WM8770_OUTMUX1 0x1c +#define WM8770_OUTMUX2 0x1d +#define WM8770_RESET 0x31 + +#define WM8770_CACHEREGNUM 0x20 + +#endif -- 1.7.3.2

1 0

[alsa-devel] [PATCH 0/4] ASoC: Introduce the new caching API
by Dimitris Papastamos 05 Nov '10

05 Nov '10

This patch series introduces the new caching API. The idea behind this caching interface is that we can provide different means of organizing and accessing the register cache. This is useful for large and sparse register maps, where one can use some kind of compression algorithm to reduce the memory footprint. The caching API is designed in such way to eliminate the need for modifying any existing drivers. Things that still need to be done. - Memory usage statistics, to make it easier to select the proper caching technique. - Support for bulk reads/writes. Dimitris Papastamos (4): ASoC: soc.h: Add new caching API prototypes and hooks ASoC: soc-cache: Add support for flat register caching ASoC: soc-cache: Add support for LZO register caching ASoC: soc-cache: Add support for rbtree based register caching include/sound/soc.h | 28 ++ sound/soc/Kconfig | 2 + sound/soc/soc-cache.c | 988 +++++++++++++++++++++++++++++++++++++++++++++++-- sound/soc/soc-core.c | 38 +-- 4 files changed, 1002 insertions(+), 54 deletions(-) -- 1.7.3.2

2 19

[alsa-devel] [RFC i-iv] ASoC: Add support for cross-device paths without dai and without name collision
by Jarkko Nikula 05 Nov '10

05 Nov '10

Hi I'm sending here four set of patches that are build on top of another. They are trying to solve issues with following setup: CPU <-> [Codec x.0] -> [Codec x.1] -> out Here only Codec x.0 has DAI link between codec and CPU, Codec x.1 is used as an amplifier and the same codec driver is used for both codec instances. Currently this setup is not possible because ASoC doesn't support cross-device paths, i.e. DAPM is per codec, there is no support to register dailess codecs and no resolution for name collisions that would occur when multiple codec instances tries to register same kcontrols and when trying to build paths between widgets. I've separated patches to these problems to separate sets so that reviewing would be easier. However, they depend on previous sets so they must be applied sequentially and thus each set is named as RFC_[i-iv]/iv. I've based this work on of top of Liam's DAPM decoupling patches. Those must be squashed together but I'm sending here them separately because they include core change from Liam and trivial conversions and minor fixes from me. i Decoupling DAPM from codecs. Core implementation from Liam Girdwood and some minor bits from me, conversion of new codecs and all the platforms. I've build tested the codecs and OMAP platforms and if some platform doesn't build, it's my fault. ii Extend ASoC core to handle cross-device paths. Decoupling paths and widgets from DAPM context and handling cross-device bias and widget power changes. iii Support for dailess codecs. This is achieved by renaming dai_link as dev_map, i.e. the former struct snd_soc_dai_link becomes struct snd_soc_dev_map so it does not only describe platform, cpu dai and codec binding but also registration of dailess codecs. iv Optional name_prefix to struct snd_soc_dev_map. With this a machine driver can specify a name that is used to prefix codec kcontrols, widgets and internal route names for avoiding name collision that would occur if multiple codec instances are registered. -- Jarkko

3 11

[alsa-devel] Balanced output support for Xonar: Patches for Virtuoso driver to add mixer option for balanced mono output (PCM179x dacs)
by Christian Wisner-Carlson 05 Nov '10

05 Nov '10

This patch adds a mixer switch for soundcards using the snd-virtuoso driver and pcm1796/pcm1792(a) DAC(s) which switches between Stereo, Balanced Left, and Balanced Right output modes. The PCM179x series has a "Monaural Mode" that outputs a single channel in differential (and therefore balanced, because of the buffer circuit) mode, which boosts the SNR and allows for common mode rejection (with the proper cable). Simply use the left output as the noninverting signal and the right output as the inverting output. The datasheets for both the pcm1792a and pcm1796 provide application suggestions, which boil down mainly to "connect an XLR jack to the outputs of the normal application circuit". I tested this thoroughly with an Asus Xonar Essence ST, although it should also work with the HDAV, Essence STX, and probably other cards. I get no noticeable interference when running balanced audio from the card over approximately 150ft of unshielded twisted pair cable which I have running through my walls. The driver defaults to stereo output and this patch will not cause issues for users who do not need/want this feature. The patches that I am posting only give one control regardless of whether or not more than one DAC is connected. I have another patchset that gives individual control of all 4 dacs in the Xonar Essence ST+H6 and HDAV+H6 setups (H6 is an optional daughterboard for surround sound). It allows for 4 balanced outputs, 8 unbalanced outputs, or any combination of balanced and unbalanced outputs. HOWEVER, it adds 4 mixer controls and the code isn't very pretty. If people want it, I'll post it as well and/or take suggestions on how to improve it. Here is a diff of xonar_pcm179x.c, which is the only changed file. The diff is against alsa-driver 1.0.23 but should cleanly patch the GIT revision. Please tell me if this is not the correct way to post a patch, and tell me if it seems like a candidate to be merged. Christian Wisner-Carlson --- ./alsa-driver-1.0.23/alsa-kernel/pci/oxygen/xonar_pcm179x.c 2010-04-16 07:10:10.000000000 -0400 +++ ./anothermono/alsa-driver-1.0.23/alsa-kernel/pci/oxygen/xonar_pcm179x.c 2010-10-30 05:28:55.000000000 -0400 @@ -176,6 +176,8 @@ unsigned int current_rate; bool os_128; bool hp_active; + bool monomode; + bool rightmono; s8 hp_gain_offset; bool has_cs2000; u8 cs2000_fun_cfg_1; @@ -532,6 +534,13 @@ reg = PCM1796_OS_64; else reg = PCM1796_OS_32; + + if (data->monomode) + reg = reg | PCM1796_MONO; + + if (data->rightmono) + reg = reg | PCM1796_CHSL_RIGHT; + for (i = 0; i < data->dacs; ++i) pcm1796_write_cached(chip, i, 20, reg); } @@ -719,6 +728,19 @@ return 0; } +static int monomode_info(struct snd_kcontrol *ctl, struct snd_ctl_elem_info *info) +{ + static const char *const names[3] = { "Stereo", "Balanced Left", "Balanced Right" }; + + info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + info->count = 1; + info->value.enumerated.items = 3; + if (info->value.enumerated.item >= 3) + info->value.enumerated.item = 0; + strcpy(info->value.enumerated.name, names[info->value.enumerated.item]); + return 0; +} + static int os_128_get(struct snd_kcontrol *ctl, struct snd_ctl_elem_value *value) { @@ -729,6 +751,18 @@ return 0; } +static int monomode_get(struct snd_kcontrol *ctl, + struct snd_ctl_elem_value *value) +{ + struct oxygen *chip = ctl->private_data; + struct xonar_pcm179x *data = chip->model_data; + int newvalue; + newvalue = data->monomode + (data->monomode & data->rightmono); + + value->value.enumerated.item[0] = newvalue; + return 0; +} + static int os_128_put(struct snd_kcontrol *ctl, struct snd_ctl_elem_value *value) { @@ -751,6 +785,25 @@ return changed; } +static int monomode_put(struct snd_kcontrol *ctl, + struct snd_ctl_elem_value *value) +{ + struct oxygen *chip = ctl->private_data; + struct xonar_pcm179x *data = chip->model_data; + int changed; + + mutex_lock(&chip->mutex); + changed = value->value.enumerated.item[0] != + (data->monomode + (data->monomode & data->rightmono)); + if (changed) { + data->monomode = (value->value.enumerated.item[0]) ? 1 : 0; + data->rightmono = (value->value.enumerated.item[0] == 2) ? 1 : 0; + update_pcm1796_oversampling(chip); + } + mutex_unlock(&chip->mutex); + return changed; +} + static const struct snd_kcontrol_new os_128_control = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "DAC Oversampling Playback Enum", @@ -759,6 +812,14 @@ .put = os_128_put, }; +static const struct snd_kcontrol_new monomode_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "DAC Mono Mode Playback Enum", + .info = monomode_info, + .get = monomode_get, + .put = monomode_put, +}; + static int st_output_switch_info(struct snd_kcontrol *ctl, struct snd_ctl_elem_info *info) { @@ -932,6 +993,9 @@ err = snd_ctl_add(chip->card, snd_ctl_new1(&os_128_control, chip)); if (err < 0) return err; + err = snd_ctl_add(chip->card, snd_ctl_new1(&monomode_control, chip)); + if (err < 0) + return err; return 0; } I am also in the process of adding a Phase Invert switch and (possibly) Deemphasis control for the PCM179x DACs as well, and will post patches if anyone is interested.

2 6

[alsa-devel] [PATCH for -rc] i.MX updates
by Sascha Hauer 05 Nov '10

05 Nov '10

Hi, The following series has some multicomponent fixes for i.MX. Also, since the SDMA driver is merged, we also switch the i.MX DMA driver to the new API. Sascha The following changes since commit c8ddb2713c624f432fa5fe3c7ecffcdda46ea0d4: Linux 2.6.37-rc1 (2010-11-01 07:54:12 -0400) are available in the git repository at: git://git.pengutronix.de/git/imx/linux-2.6.git asoc-rc-pu Sascha Hauer (7): ASoC: i.MX31ads: initialize only on correct machine ASoC i.MX eukrea tlv320: Fix for multicomponent ASoC i.MX phycore ac97: remove unnecessary includes ASoC i.MX: register dma audio device ASoC i.MX: switch to new DMA api phycore-ac97: add ac97 to cardname ASoC: i.MX: we can do mono sound/soc/imx/eukrea-tlv320.c | 8 +- sound/soc/imx/imx-pcm-dma-mx2.c | 221 +++++++++++++++++---------------------- sound/soc/imx/imx-ssi.c | 48 ++++++--- sound/soc/imx/imx-ssi.h | 4 + sound/soc/imx/phycore-ac97.c | 5 +- sound/soc/imx/wm1133-ev1.c | 4 + 6 files changed, 142 insertions(+), 148 deletions(-)

3 12

[alsa-devel] Buffer memory does not get allocated?
by Radivoje Jovanovic 05 Nov '10

05 Nov '10

I am allocating memory for the buffers in my init call by doing: snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, snd_dma_continuous_data(GFP_KERNEL), 256*1024, 256*1024); in my hw_params call I have: ret= snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); here is the output from my hw_params call: called snd_pcm_lib_malloc_pages return=1 params_buffer_bytes(hw_params)=32768 Size of DMA area=32768 Buffer size in bytes=262144 Buffer virt address=9dc00000 Buffer phys address=0 Now I am not sure why is my buffer size bigger than my DMA area. I assume that memory is not linear because of that and that is why I do not have phys address to the buffer. How do I fix this? Thanx Ogi

2 1

[alsa-devel] [PATCH 00/49] Use vzalloc not vmalloc/kmemset
by Joe Perches 05 Nov '10

05 Nov '10

Converted vmalloc/memset and vmalloc_node/memset to vzalloc or vzalloc_node using a cocci script and some editing Reduces text a little bit. Compiled x86 only. There are still vmalloc_32 with memset calls still around. Broken out to multiple patches to cc appropriate maintainers. Joe Perches (49): arch/ia64: Use vzalloc arch/mips: Use vzalloc arch/powerpc: Use vzalloc arch/s390: Use vzalloc arch/x86: Use vzalloc crypto: Use vzalloc drivers/atm: Use vzalloc drivers/block: Use vzalloc drivers/char: Use vzalloc drivers/gpu: Use vzalloc drivers/hid: Use vzalloc drivers/infiniband: Use vzalloc drivers/isdn: Use vzalloc drivers/md: Use vzalloc drivers/media: Use vzalloc drivers/mtd: Use vzalloc drivers/net/cxgb3: Use vzalloc drivers/net/cxgb4: Use vzalloc drivers/net/e1000: Use vzalloc drivers/net/e1000e: Use vzalloc drivers/net/ehea: Use vzalloc drivers/net/igb: Use vzalloc drivers/net/igbvf: Use vzalloc drivers/net/ixgb: Use vzalloc drivers/net/ixgbe: Use vzalloc drivers/net/ixgbevf: Use vzalloc drivers/net/netxen: Use vzalloc drivers/net/pch_gbe: Use vzalloc drivers/net/qlcnic: Use vzalloc drivers/net/sfc: Use vzalloc drivers/net/vxge: Use vzalloc drivers/net/bnx2.c: Use vzalloc drivers/s390: Use vzalloc drivers/scsi: Use vzalloc drivers/staging: Use vzalloc drivers/video: Use vzalloc fs/ext4: Use vzalloc fs/jffs2: Use vzalloc fs/reiserfs: Use vzalloc fs/udf: Use vzalloc fs/xfs: Use vzalloc include/linux/coda_linux.h: Use vzalloc kernel: Use vzalloc mm: Use vzalloc net/core/pktgen.c: Use vzalloc net/netfilter: Use vzalloc net/rds: Use vzalloc sound/oss/dev_table.c: Use vzalloc virt/kvm/kvm_main.c: Use vzalloc arch/ia64/kernel/perfmon.c | 3 +- arch/mips/sibyte/common/sb_tbprof.c | 3 +- arch/powerpc/kvm/book3s.c | 6 +-- arch/powerpc/platforms/cell/spufs/lscsa_alloc.c | 3 +- arch/s390/hypfs/hypfs_diag.c | 3 +- arch/x86/kernel/microcode_amd.c | 3 +- arch/x86/kvm/x86.c | 3 +- arch/x86/mm/pageattr-test.c | 3 +- crypto/deflate.c | 3 +- crypto/zlib.c | 3 +- drivers/atm/idt77252.c | 11 ++++--- drivers/atm/lanai.c | 3 +- drivers/block/drbd/drbd_bitmap.c | 5 +-- drivers/char/agp/backend.c | 3 +- drivers/char/mspec.c | 5 +-- drivers/gpu/drm/via/via_dmablit.c | 4 +- drivers/hid/hid-core.c | 3 +- drivers/infiniband/hw/amso1100/c2_rnic.c | 5 +-- drivers/infiniband/hw/ehca/ipz_pt_fn.c | 5 +-- drivers/infiniband/hw/ipath/ipath_driver.c | 3 +- drivers/infiniband/hw/ipath/ipath_file_ops.c | 11 ++----- drivers/infiniband/hw/ipath/ipath_init_chip.c | 5 +-- drivers/infiniband/hw/qib/qib_init.c | 7 +--- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 10 ++---- drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 +- drivers/isdn/i4l/isdn_common.c | 4 +- drivers/isdn/mISDN/dsp_core.c | 3 +- drivers/isdn/mISDN/l1oip_codec.c | 6 +-- drivers/md/dm-log.c | 3 +- drivers/md/dm-snap-persistent.c | 3 +- drivers/md/dm-table.c | 4 +-- drivers/media/dvb/ngene/ngene-core.c | 3 +- drivers/media/video/mx3_camera.c | 3 +- drivers/media/video/pwc/pwc-if.c | 3 +- drivers/media/video/videobuf-dma-sg.c | 3 +- drivers/mtd/nand/nandsim.c | 3 +- drivers/mtd/ubi/vtbl.c | 6 +-- drivers/net/bnx2.c | 10 +----- drivers/net/cxgb3/cxgb3_offload.c | 7 ++-- drivers/net/cxgb4/cxgb4_main.c | 7 ++-- drivers/net/e1000/e1000_main.c | 6 +-- drivers/net/e1000e/netdev.c | 6 +-- drivers/net/ehea/ehea_main.c | 4 +-- drivers/net/igb/igb_main.c | 6 +-- drivers/net/igbvf/netdev.c | 6 +-- drivers/net/ixgb/ixgb_main.c | 6 +-- drivers/net/ixgbe/ixgbe_main.c | 10 ++---- drivers/net/ixgbevf/ixgbevf_main.c | 6 +-- drivers/net/netxen/netxen_nic_init.c | 7 +--- drivers/net/pch_gbe/pch_gbe_main.c | 6 +-- drivers/net/qlcnic/qlcnic_init.c | 7 +--- drivers/net/sfc/filter.c | 3 +- drivers/net/vxge/vxge-config.c | 37 +++++----------------- drivers/s390/cio/blacklist.c | 3 +- drivers/scsi/bfa/bfad.c | 3 +- drivers/scsi/bfa/bfad_debugfs.c | 8 +---- drivers/scsi/cxgbi/libcxgbi.h | 9 ++---- drivers/scsi/osst.c | 3 +- drivers/scsi/qla2xxx/qla_attr.c | 3 +- drivers/scsi/qla2xxx/qla_bsg.c | 3 +- drivers/scsi/scsi_debug.c | 7 +--- drivers/staging/comedi/drivers.c | 4 +-- drivers/staging/rtl8192e/r8192E_core.c | 4 +-- drivers/staging/udlfb/udlfb.c | 5 +-- drivers/staging/xgifb/XGI_main_26.c | 3 +- drivers/staging/zram/zram_drv.c | 3 +- drivers/video/arcfb.c | 5 +-- drivers/video/broadsheetfb.c | 4 +-- drivers/video/hecubafb.c | 5 +-- drivers/video/metronomefb.c | 4 +-- drivers/video/xen-fbfront.c | 3 +- fs/ext4/super.c | 4 +-- fs/jffs2/build.c | 5 +-- fs/reiserfs/journal.c | 9 ++---- fs/reiserfs/resize.c | 4 +-- fs/udf/super.c | 5 +-- fs/xfs/linux-2.6/kmem.h | 7 +---- include/linux/coda_linux.h | 26 ++++++++++------ kernel/profile.c | 6 +-- kernel/relay.c | 4 +-- mm/memcontrol.c | 5 +-- mm/page_cgroup.c | 3 +- mm/percpu.c | 8 +---- mm/swapfile.c | 3 +- net/core/pktgen.c | 3 +- net/netfilter/x_tables.c | 5 +-- net/rds/ib_cm.c | 6 +-- sound/oss/dev_table.c | 6 +-- virt/kvm/kvm_main.c | 13 ++------ 89 files changed, 167 insertions(+), 328 deletions(-) -- 1.7.3.1.g432b3.dirty

1 0

[alsa-devel] On vacation
by Takashi Iwai 04 Nov '10

04 Nov '10

Hi, I'll be on vacation from today for two weeks, and will be less responsive during that. I'm going to catch up mails in my inbox occasionally, but won't read MLs, so don't forget to add me to Cc if you have urgent pull requests or patches to be merged. thanks, Takashi

2 1

[alsa-devel] Retrieving original timestamps in dsnoop.
by Pontus Oldberg 04 Nov '10

04 Nov '10

Hello, I am working in a gstreamer based project where we are using alsasrc to feed the audio pipeline. On of the things that we need to be able to do is to get the monotonic timestamp from the alsalib in order for our video and audio to be perfectly synchronized. This worked fine until we introduced the dsnoop plug-in which creates its own timestamp reference. I have played around with the dsnoop plugin and created a preliminary fix that gives us the result that we want. I'd like to know if this looks like the way to go or if this can be obtained in any other way. We are using dsnoop in order to be able to create two separate audio pipelines, we don't care about stereo, just simple mono streams. ? libs/alsa-lib/build ? libs/alsa-lib/alsa-lib/autom4te.cache ? libs/alsa-lib/alsa-lib/src/control/ctl_symbols_list.c ? libs/alsa-lib/alsa-lib/src/pcm/pcm_symbols_list.c Index: libs/alsa-lib/alsa-lib/src/pcm/pcm_direct.h =================================================================== RCS file: /usr/local/cvs/linux/libs/alsa-lib/alsa-lib/src/pcm/pcm_direct.h,v retrieving revision 1.1.1.2 diff -u -r1.1.1.2 pcm_direct.h --- libs/alsa-lib/alsa-lib/src/pcm/pcm_direct.h 6 Sep 2010 08:18:20 -0000 1.1.1.2 +++ libs/alsa-lib/alsa-lib/src/pcm/pcm_direct.h 29 Oct 2010 09:56:08 -0000 @@ -114,6 +114,14 @@ } u; } snd_pcm_direct_share_t; +/* + * Defines the clock type to use + */ +enum snd_pcm_sub_clock_type { + SND_PCM_SLAVE_CLOCK_DEFAULT = 0x00, + SND_PCM_SLAVE_CLOCK_SUB =0x01, +}; + typedef struct snd_pcm_direct snd_pcm_direct_t; struct snd_pcm_direct { @@ -153,6 +161,7 @@ int max_periods; /* max periods (-1 = fixed periods, 0 = max buffer size) */ unsigned int channels; /* client's channels */ unsigned int *bindings; + int sub_clock; union { struct { int shmid_sum; /* IPC global sum ring buffer memory identification */ Index: libs/alsa-lib/alsa-lib/src/pcm/pcm_dsnoop.c =================================================================== RCS file: /usr/local/cvs/linux/libs/alsa-lib/alsa-lib/src/pcm/pcm_dsnoop.c,v retrieving revision 1.1.1.2 diff -u -r1.1.1.2 pcm_dsnoop.c --- libs/alsa-lib/alsa-lib/src/pcm/pcm_dsnoop.c 6 Sep 2010 08:18:20 -0000 1.1.1.2 +++ libs/alsa-lib/alsa-lib/src/pcm/pcm_dsnoop.c 29 Oct 2010 09:56:08 -0000 @@ -51,7 +51,7 @@ #endif /* - * + * Handles packing and formating of buffers */ static void snoop_areas(snd_pcm_direct_t *dsnoop, @@ -168,11 +168,18 @@ default: break; } - memset(status, 0, sizeof(*status)); + + memset(status, 0, sizeof(status)); state = snd_pcm_state(dsnoop->spcm); status->state = state == SND_PCM_STATE_RUNNING ? dsnoop->state : state; - status->trigger_tstamp = dsnoop->trigger_tstamp; - gettimestamp(&status->tstamp, pcm->monotonic); + + if (dsnoop->sub_clock == SND_PCM_SLAVE_CLOCK_SUB) { + snd_pcm_status(dsnoop->spcm, status); + } else { + status->trigger_tstamp = dsnoop->trigger_tstamp; + gettimestamp(&status->tstamp, pcm->monotonic); + } + status->avail = snd_pcm_mmap_capture_avail(pcm); status->avail_max = status->avail > dsnoop->avail_max ? status->avail : dsnoop->avail_max; dsnoop->avail_max = 0; @@ -197,18 +204,21 @@ static int snd_pcm_dsnoop_delay(snd_pcm_t *pcm, snd_pcm_sframes_t *delayp) { snd_pcm_direct_t *dsnoop = pcm->private_data; - int err; + int err = 0; switch(dsnoop->state) { case SNDRV_PCM_STATE_DRAINING: case SNDRV_PCM_STATE_RUNNING: - err = snd_pcm_dsnoop_sync_ptr(pcm); + err = snd_pcm_dsnoop_sync_ptr(pcm); if (err < 0) return err; case SNDRV_PCM_STATE_PREPARED: case SNDRV_PCM_STATE_SUSPENDED: - *delayp = snd_pcm_mmap_capture_hw_avail(pcm); - return 0; + if (dsnoop->sub_clock == SND_PCM_SLAVE_CLOCK_SUB) + err = dsnoop->spcm->fast_ops->delay(dsnoop->spcm, delayp); + else + *delayp = snd_pcm_mmap_capture_hw_avail(pcm); + return err; case SNDRV_PCM_STATE_XRUN: return -EPIPE; case SNDRV_PCM_STATE_DISCONNECTED: @@ -271,7 +281,12 @@ if (err < 0) return err; dsnoop->state = SND_PCM_STATE_RUNNING; - gettimestamp(&dsnoop->trigger_tstamp, pcm->monotonic); + if (dsnoop->sub_clock == SND_PCM_SLAVE_CLOCK_SUB) { + snd_pcm_status_t status; + snd_pcm_status(dsnoop->spcm, &status); + dsnoop->trigger_tstamp = status.trigger_tstamp; + } else + gettimestamp(&dsnoop->trigger_tstamp, pcm->monotonic); return 0; } @@ -421,6 +436,7 @@ return snd_pcm_mmap_capture_avail(pcm); } +/* TODO: This function is faulty, needs fixing */ static int snd_pcm_dsnoop_htimestamp(snd_pcm_t *pcm, snd_pcm_uframes_t *avail, snd_htimestamp_t *tstamp) @@ -673,6 +689,9 @@ if (dsnoop->channels == UINT_MAX) dsnoop->channels = dsnoop->shmptr->s.channels; + /* TODO: Needs to be loaded from the config file */ + dsnoop->sub_clock = SND_PCM_SLAVE_CLOCK_SUB; + snd_pcm_direct_semaphore_up(dsnoop, DIRECT_IPC_SEM_CLIENT); *pcmp = pcm; /Regards /Pontus

2 3

[alsa-devel] [PATCH] ASoC: Use pm_wakeup_event() in WM8962 jack detection
by Mark Brown 03 Nov '10

03 Nov '10

Ensure that the system does not suspend while we process a WM8962 jack event by using pm_wakeup_event() to block the suspend while we're waiting for the jack to settle. Use a slightly longer timeout than the jack waits to allow for other stuff to take over and delays in scheduling. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8962.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 894d0cd..2eaf9bb 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3353,6 +3353,8 @@ static irqreturn_t wm8962_irq(int irq, void *data) if (active & (WM8962_MICSCD_EINT | WM8962_MICD_EINT)) { dev_dbg(codec->dev, "Microphone event detected\n"); + pm_wakeup_event(codec->dev, 300); + schedule_delayed_work(&wm8962->mic_work, msecs_to_jiffies(250)); } -- 1.7.1

2 1

[alsa-devel] [PATCH] ASoC: Remove register write trace from WM8994
by Mark Brown 03 Nov '10

03 Nov '10

We now have trace in the ASoC core so we don't need to our own trace in the driver. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 3f70dee..d81cac5 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1730,8 +1730,6 @@ static int wm8994_write(struct snd_soc_codec *codec, unsigned int reg, if (!wm8994_volatile(reg)) wm8994->reg_cache[reg] = value; - dev_dbg(codec->dev, "0x%x = 0x%x\n", reg, value); - return wm8994_reg_write(codec->control_data, reg, value); } -- 1.7.1

2 1

[alsa-devel] [PATCH] ASoC: soc-cache: Remove unnecessary debugging info
by Dimitris Papastamos 03 Nov '10

03 Nov '10

No need to print the register-value pair again, as we've already hooked snd_soc_write() for that matter. Signed-off-by: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> --- sound/soc/soc-cache.c | 12 ------------ 1 files changed, 0 insertions(+), 12 deletions(-) diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c index d214f02..8785a0c 100644 --- a/sound/soc/soc-cache.c +++ b/sound/soc/soc-cache.c @@ -50,8 +50,6 @@ static int snd_soc_4_12_write(struct snd_soc_codec *codec, unsigned int reg, return 0; } - dev_dbg(codec->dev, "0x%x = 0x%x\n", reg, value); - ret = codec->hw_write(codec->control_data, data, 2); if (ret == 2) return 0; @@ -126,8 +124,6 @@ static int snd_soc_7_9_write(struct snd_soc_codec *codec, unsigned int reg, return 0; } - dev_dbg(codec->dev, "0x%x = 0x%x\n", reg, value); - ret = codec->hw_write(codec->control_data, data, 2); if (ret == 2) return 0; @@ -186,8 +182,6 @@ static int snd_soc_8_8_write(struct snd_soc_codec *codec, unsigned int reg, return 0; } - dev_dbg(codec->dev, "0x%x = 0x%x\n", reg, value); - if (codec->hw_write(codec->control_data, data, 2) == 2) return 0; else @@ -260,8 +254,6 @@ static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg, return 0; } - dev_dbg(codec->dev, "0x%x = 0x%x\n", reg, value); - if (codec->hw_write(codec->control_data, data, 3) == 3) return 0; else @@ -455,8 +447,6 @@ static int snd_soc_16_8_write(struct snd_soc_codec *codec, unsigned int reg, return 0; } - dev_dbg(codec->dev, "0x%x = 0x%x\n", reg, value); - ret = codec->hw_write(codec->control_data, data, 3); if (ret == 3) return 0; @@ -568,8 +558,6 @@ static int snd_soc_16_16_write(struct snd_soc_codec *codec, unsigned int reg, return 0; } - dev_dbg(codec->dev, "0x%x = 0x%x\n", reg, value); - ret = codec->hw_write(codec->control_data, data, 4); if (ret == 4) return 0; -- 1.7.3.2

2 1

[alsa-devel] [PATCH] ASoC: Push snd_soc_write() and snd_soc_read() into the source file
by Mark Brown 03 Nov '10

03 Nov '10

Facilitating adding trace type stuff. For a first pass add some dev_dbg() statements into them. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- include/sound/soc.h | 14 +++----------- sound/soc/soc-core.c | 19 +++++++++++++++++++ 2 files changed, 22 insertions(+), 11 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 5c3bce8..aaf34d7 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -639,17 +639,9 @@ struct soc_enum { }; /* codec IO */ -static inline unsigned int snd_soc_read(struct snd_soc_codec *codec, - unsigned int reg) -{ - return codec->driver->read(codec, reg); -} - -static inline unsigned int snd_soc_write(struct snd_soc_codec *codec, - unsigned int reg, unsigned int val) -{ - return codec->driver->write(codec, reg, val); -} +unsigned int snd_soc_read(struct snd_soc_codec *codec, unsigned int reg); +unsigned int snd_soc_write(struct snd_soc_codec *codec, + unsigned int reg, unsigned int val); /* device driver data */ diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 805343f..6d93d44 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1876,6 +1876,25 @@ void snd_soc_free_ac97_codec(struct snd_soc_codec *codec) } EXPORT_SYMBOL_GPL(snd_soc_free_ac97_codec); +unsigned int snd_soc_read(struct snd_soc_codec *codec, unsigned int reg) +{ + unsigned int ret; + + ret = codec->driver->read(codec, reg); + dev_dbg(codec->dev, "read %x => %x\n", reg, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(snd_soc_read); + +unsigned int snd_soc_write(struct snd_soc_codec *codec, + unsigned int reg, unsigned int val) +{ + dev_dbg(codec->dev, "write %x = %x\n", reg, val); + return codec->driver->write(codec, reg, val); +} +EXPORT_SYMBOL_GPL(snd_soc_write); + /** * snd_soc_update_bits - update codec register bits * @codec: audio codec -- 1.7.1

2 2

[alsa-devel] [PATCH] ASoC: tpa6130a2: Fix unbalanced regulator disables
by Jarkko Nikula 03 Nov '10

03 Nov '10

This driver has unbalanced regulator_disable when doing module loading and unloading. This is because tpa6130a2_probe followed by tpa6130a2_remove calls twice tpa6130a2_power(0). Fix this by implementing a state checking in tpa6130a2_power. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> --- sound/soc/codecs/tpa6130a2.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c index 329acc1..83b5631 100644 --- a/sound/soc/codecs/tpa6130a2.c +++ b/sound/soc/codecs/tpa6130a2.c @@ -125,7 +125,7 @@ static int tpa6130a2_power(int power) data = i2c_get_clientdata(tpa6130a2_client); mutex_lock(&data->mutex); - if (power) { + if (power && !data->power_state) { /* Power on */ if (data->power_gpio >= 0) gpio_set_value(data->power_gpio, 1); @@ -153,7 +153,7 @@ static int tpa6130a2_power(int power) val = tpa6130a2_read(TPA6130A2_REG_CONTROL); val &= ~TPA6130A2_SWS; tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val); - } else { + } else if (!power && data->power_state) { /* set SWS */ val = tpa6130a2_read(TPA6130A2_REG_CONTROL); val |= TPA6130A2_SWS; -- 1.7.1

5 7

[alsa-devel] [PATCH 1/2] ASoC: tlv320aic3x: Use gpio_is_valid in checking for valid gpio_reset
by Jarkko Nikula 03 Nov '10

03 Nov '10

I promised to convert this at some point. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- sound/soc/codecs/tlv320aic3x.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index fc68779..157b534 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1075,7 +1075,7 @@ static int aic3x_regulator_event(struct notifier_block *nb, * Put codec to reset and require cache sync as at least one * of the supplies was disabled */ - if (aic3x->gpio_reset >= 0) + if (gpio_is_valid(aic3x->gpio_reset)) gpio_set_value(aic3x->gpio_reset, 0); aic3x->codec->cache_sync = 1; } @@ -1102,7 +1102,7 @@ static int aic3x_set_power(struct snd_soc_codec *codec, int power) if (!codec->cache_sync) goto out; - if (aic3x->gpio_reset >= 0) { + if (gpio_is_valid(aic3x->gpio_reset)) { udelay(1); gpio_set_value(aic3x->gpio_reset, 1); } @@ -1359,7 +1359,7 @@ static int aic3x_probe(struct snd_soc_codec *codec) return ret; } - if (aic3x->gpio_reset >= 0) { + if (gpio_is_valid(aic3x->gpio_reset)) { ret = gpio_request(aic3x->gpio_reset, "tlv320aic3x reset"); if (ret != 0) goto err_gpio; @@ -1414,7 +1414,7 @@ err_notif: &aic3x->disable_nb[i].nb); regulator_bulk_free(ARRAY_SIZE(aic3x->supplies), aic3x->supplies); err_get: - if (aic3x->gpio_reset >= 0) + if (gpio_is_valid(aic3x->gpio_reset)) gpio_free(aic3x->gpio_reset); err_gpio: kfree(aic3x); @@ -1427,7 +1427,7 @@ static int aic3x_remove(struct snd_soc_codec *codec) int i; aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF); - if (aic3x->gpio_reset >= 0) { + if (gpio_is_valid(aic3x->gpio_reset)) { gpio_set_value(aic3x->gpio_reset, 0); gpio_free(aic3x->gpio_reset); } -- 1.7.2.3

3 4

[alsa-devel] 20101103 alsa-driver snapshot build failure
by Ozan Çağlayan 03 Nov '10

03 Nov '10

This is on linux kernel 2.6.36: make -C /lib/modules/2.6.36-145/build SUBDIRS=/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver CPP="x86_64-pc-linux-gnu-gcc -E" CC="x86_64-pc-linux-gnu-gcc" modules make[1]: Entering directory `/usr/src/linux-headers-2.6.36-145' CC [M] /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/pdaudiocf.o In file included from /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/pdaudiocf.c:14:0: /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c: In function 'snd_pdacf_probe': /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:145:6: error: 'struct pcmcia_device' has no member named 'config_flags' /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:146:6: error: 'struct pcmcia_device' has no member named 'config_index' /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:147:6: error: 'struct pcmcia_device' has no member named 'config_regs' /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c: In function 'pdacf_config': /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:219:6: error: 'struct pcmcia_device' has no member named 'config_index' /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:220:6: error: 'struct pcmcia_device' has no member named 'config_flags' /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:230:2: error: implicit declaration of function 'pcmcia_enable_device' /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c: At top level: /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:290:2: error: unknown field 'name' specified in initializer /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:290:2: warning: initialization from incompatible pointer type *** 7 errors, 1 warnings make[4]: *** [/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/pdaudiocf.o] Hata 1 make[3]: *** [/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf] Hata 2 make[2]: *** [/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia] Hata 2 make[1]: *** [_module_/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.36-145' make: *** [compile] Error 2 --- Ozan Çağlayan TUBITAK/UEKAE - Pardus Linux http://www.pardus.org.tr/eng

2 1

[alsa-devel] [PATCH] ASoC: Convert soc-jack code to use request_any_context_irq()
by Mark Brown 03 Nov '10

03 Nov '10

Allow the standard soc-jack GPIO based jack handling to handle the use of GPIOs which may sleep (such as those on GPIO expanders) by converting the code to use request_any_context_irq(). Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/soc-jack.c | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index 8a0a920..9f07551 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -263,11 +263,12 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count, INIT_DELAYED_WORK(&gpios[i].work, gpio_work); gpios[i].jack = jack; - ret = request_irq(gpio_to_irq(gpios[i].gpio), - gpio_handler, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - jack->codec->dev->driver->name, - &gpios[i]); + ret = request_any_context_irq(gpio_to_irq(gpios[i].gpio), + gpio_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + jack->codec->dev->driver->name, + &gpios[i]); if (ret) goto err; -- 1.7.1

2 1

[alsa-devel] [PATCH] ASoC: Check return value of strict_strtoul() in WM8962
by Mark Brown 03 Nov '10

03 Nov '10

strict_strtoul() has been made __must_check so do so. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8962.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 894d0cd..e809274 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3500,8 +3500,11 @@ static ssize_t wm8962_beep_set(struct device *dev, { struct wm8962_priv *wm8962 = dev_get_drvdata(dev); long int time; + int ret; - strict_strtol(buf, 10, &time); + ret = strict_strtol(buf, 10, &time); + if (ret != 0) + return ret; input_event(wm8962->beep, EV_SND, SND_TONE, time); -- 1.7.1

1 0

[alsa-devel] [GIT PULL] ASoC fixes for 2.6.37
by Liam Girdwood 03 Nov '10

03 Nov '10

Hi Takashi, Some fixes for 2.6.37 before I pull in rc1. The following changes since commit 911a0f0bfc01750590e8ac6e7f9f4921f470b0d1: ASoC: tlv320dac33: Error handling for broken chip (2010-10-30 17:33:38 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6.git for-2.6.37 Jarkko Nikula (1): ASoC: tpa6130a2: Fix unbalanced regulator disables Peter Ujfalusi (2): ASoC: tlv320dac33: Limit the US_TO_SAMPLES macro ASoC: tlv320dac33: Mode1 FIFO auto configuration fix sound/soc/codecs/tlv320dac33.c | 10 +++++++--- sound/soc/codecs/tpa6130a2.c | 4 ++-- 2 files changed, 9 insertions(+), 5 deletions(-)

2 1

[alsa-devel] [PATCH v6 0/9] Add Omapl138-Hawkboard support
by vm.rod25＠gmail.com 03 Nov '10

03 Nov '10

From: Victor Rodriguez <victor.rodriguez(a)sasken.com> This patch adds EMAC, EDMA, ASoC, SOUND, MMC/SD and USB OHCI support for the Hawkboard-L138 system It is under the machine name "omapl138_hawkboard". This system is based on the da850 davinci CPU architecture. Victor Rodriguez (9): davinci: EMAC support for Omapl138-Hawkboard davinci: EDMA support for Omapl138-Hawkboard davinci: ASoC support for Omapl138-Hawkboard davinci: McASP configuration for Omapl138-Hawkboard davinci: Audio support for Omapl138-Hawkboard davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard davinci: MMC/SD support for Omapl138-Hawkboar davinci: USB clocks for Omapl138-Hawkboard davinci: USB1.1 support for Omapl138-Hawkboard arch/arm/mach-davinci/board-omapl138-hawk.c | 313 +++++++++++++++++++++++++++ arch/arm/mach-davinci/da850.c | 22 ++- arch/arm/mach-davinci/include/mach/mux.h | 4 + sound/soc/davinci/Kconfig | 5 +- sound/soc/davinci/davinci-evm.c | 6 +- 5 files changed, 345 insertions(+), 5 deletions(-)

4 13

[alsa-devel] sound over HDMI on AppleTV (1G) with nvidia drivers
by Benjamin BERTRAND 02 Nov '10

02 Nov '10

Hi, Currently to get sound over HDMI on AppleTV (1st generation) (with linux of course), NVIDIA 100.14.19 drivers are required (and they compile only on Ubuntu 8.04). It doesn't work with newer drivers. I made a few tests with Ubuntu 9.10 + kernel 2.6.32 + alsa-driver 1.0.23 + NVIDIA drivers 256.35 atv uses a SiI1390 chip for HDMI output (and NVidia GeForce Go 7300 / G72 pci-express chipset). In current alsa-driver, SiI1390 uses the ATI HDMI codec which hasn't been updated in a while. So I patched alsa-driver to use the INTEL HDMI codec instead. After boot, and before starting X, I have sound (tested with aplay). See alsa-info log here: http://pastebin.com/dsaqnDKb As soon as I start X, no more sound. alsa-info log here: http://pastebin.com/fHqyJw6Q Trying to mute - unmute with alsamixer (it puts the digital output back to enable) or reloading the driver doesn't help. Can't get any sound with X. One thing I noticed is that the function hdmi_intrinsic_event is never called. I never get any "HDMI hot plug event". So monitor_present and eld_valid are never set. Not sure this is really relevant, but that's where I got stuck so far. Is the HDMI output disabled because alsa doesn't give the right information? Any advice? What more could I test? Thanks Benjamin

1 0

[alsa-devel] ASoC updates for 2.6.38
by Mark Brown 02 Nov '10

02 Nov '10

The following changes since commit c8ddb2713c624f432fa5fe3c7ecffcdda46ea0d4: Linux 2.6.37-rc1 (2010-11-01 07:54:12 -0400) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.38 The only big change here is the addition of the ALC CODECs and the HP thin client machine drivers that depend on them. Arnaud Patard (2): ASoC: add support for alc562[123] codecs ASoC: kirkwood: Add audio support to hp t5325 thin clients Eric Miao (1): ASoC: fix the building issue of missing codec field in 'struct snd_soc_card' Jarkko Nikula (3): ASoC: Fix SND_SOC_ALL_CODECS typo for jz4740 ASoC: Include cx20442 to SND_SOC_ALL_CODECS ASoC: Fix SND_SOC_ALL_CODECS typo for alc5623 Joe Perches (1): ASoC: Update WARN uses in wm_hubs Mark Brown (6): ASoC: Check return value of struct_strtoul() in pmdown_time_set() ASoC: Store DC offset correction for wm_hubs devices in class W mode ASoC: Remove volatility from WM8900 POWER1 register Merge branch 'for-2.6.37' into for-2.6.38 Merge commit 'v2.6.37-rc1' into for-2.6.37 Merge branch 'for-2.6.37' into HEAD include/sound/alc5623.h | 15 + sound/soc/codecs/Kconfig | 8 +- sound/soc/codecs/Makefile | 2 + sound/soc/codecs/alc5623.c | 1118 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/alc5623.h | 161 +++++ sound/soc/codecs/wm8900.c | 6 - sound/soc/codecs/wm8993.c | 2 + sound/soc/codecs/wm8994.c | 3 + sound/soc/codecs/wm_hubs.c | 69 ++- sound/soc/codecs/wm_hubs.h | 3 + sound/soc/kirkwood/Kconfig | 9 + sound/soc/kirkwood/Makefile | 2 + sound/soc/kirkwood/kirkwood-t5325.c | 141 +++++ sound/soc/pxa/tosa.c | 2 +- sound/soc/soc-core.c | 5 +- 15 files changed, 1514 insertions(+), 32 deletions(-) create mode 100644 include/sound/alc5623.h create mode 100644 sound/soc/codecs/alc5623.c create mode 100644 sound/soc/codecs/alc5623.h create mode 100644 sound/soc/kirkwood/kirkwood-t5325.c

2 1

[alsa-devel] ASoC updates for 2.6.37
by Mark Brown 02 Nov '10

02 Nov '10

The following changes since commit c8ddb2713c624f432fa5fe3c7ecffcdda46ea0d4: Linux 2.6.37-rc1 (2010-11-01 07:54:12 -0400) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.37 Mark Brown (3): Merge commit 'v2.6.37-rc1' into for-2.6.37 For obvious reasons I'll omit the diffstat :)

1 0

[alsa-devel] [REGRESSION] no sound on T60 laptop (HDA Intel)
by Miklos Szeredi 02 Nov '10

02 Nov '10

Hi, In 2.6.36-rc* sound stopped working on my T60 (HDA Intel). Everything appears normal except there's no sound. Dmesg attached. ... Hmm, it appears sound is back after a suspend/resume. Strange. Thanks, Miklos [ 0.000000] Linux version 2.6.36-rc6-00084-gc6ea21e-dirty (mszeredi@tucsk) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #99 SMP PREEMPT Mon Oct 4 15:37:55 CEST 2010 [ 0.000000] Command line: root=/dev/sda5 vga=0x365 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfedf000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f6810] f6810 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfed0000 page 4k [ 0.000000] kernel direct mapping tables up to bfed0000 @ 8000-d000 [ 0.000000] ACPI: RSDP 00000000000f67e0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bfed13c7 0008C (v01 LENOVO TP-79 00002190 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bfed1500 000F4 (v03 LENOVO TP-79 00002190 LNVO 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100702/tbfadt-526) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20100702/tbfadt-557) [ 0.000000] ACPI: DSDT 00000000bfed185e 0D3C2 (v01 LENOVO TP-79 00002190 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000bfef4000 00040 [ 0.000000] ACPI: SSDT 00000000bfed16b4 001AA (v01 LENOVO TP-79 00002190 MSFT 0100000E) [ 0.000000] ACPI: ECDT 00000000bfedec20 00052 (v01 LENOVO TP-79 00002190 LNVO 00000001) [ 0.000000] ACPI: TCPA 00000000bfedec72 00032 (v02 LENOVO TP-79 00002190 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bfedeca4 00068 (v01 LENOVO TP-79 00002190 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bfeded0c 0003C (v01 LENOVO TP-79 00002190 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bfeded48 00038 (v01 LENOVO TP-79 00002190 LNVO 00000001) [ 0.000000] ACPI: SLIC 00000000bfedee62 00176 (v01 LENOVO TP-79 00002190 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bfedefd8 00028 (v01 LENOVO TP-79 00002190 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bfef2655 0025F (v01 LENOVO TP-79 00002190 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bfef28b4 000A6 (v01 LENOVO TP-79 00002190 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bfef295a 004F7 (v01 LENOVO TP-79 00002190 INTL 20050513) [ 0.000000] ACPI: SSDT 00000000bfef2e51 001D8 (v01 LENOVO TP-79 00002190 INTL 20050513) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfed0 [ 0.000000] On node 0 totalpages: 786030 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3942 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10692 pages used for memmap [ 0.000000] DMA32 zone: 771340 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [7000 - 77ff] [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880002600000 s79424 r8192 d22976 u1048576 [ 0.000000] pcpu-alloc: s79424 r8192 d22976 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775282 [ 0.000000] Kernel command line: root=/dev/sda5 vga=0x365 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Subtract (49 early reservations) [ 0.000000] #1 [0001000000 - 0002487c98] TEXT DATA BSS [ 0.000000] #2 [0002488000 - 000248814c] BRK [ 0.000000] #3 [00000f6820 - 0000100000] BIOS reserved [ 0.000000] #4 [00000f6810 - 00000f6820] MP-table mpf [ 0.000000] #5 [000009f000 - 000009f5a1] BIOS reserved [ 0.000000] #6 [000009f6bd - 00000f6810] BIOS reserved [ 0.000000] #7 [000009f5a1 - 000009f6bd] MP-table mpc [ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE [ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP [ 0.000000] #10 [0000008000 - 000000b000] PGTABLE [ 0.000000] #11 [0002488180 - 0002489180] BOOTMEM [ 0.000000] #12 [0002487cc0 - 0002487f00] BOOTMEM [ 0.000000] #13 [0002c8a000 - 000568a000] BOOTMEM [ 0.000000] #14 [0002489180 - 0002489580] BOOTMEM [ 0.000000] #15 [0002489580 - 00024c9580] BOOTMEM [ 0.000000] #16 [00024ca000 - 00024cb000] BOOTMEM [ 0.000000] #17 [0002487f00 - 0002487f41] BOOTMEM [ 0.000000] #18 [0002487f80 - 0002487fc3] BOOTMEM [ 0.000000] #19 [00024c9580 - 00024c9900] BOOTMEM [ 0.000000] #20 [00024c9900 - 00024c9968] BOOTMEM [ 0.000000] #21 [00024c9980 - 00024c99e8] BOOTMEM [ 0.000000] #22 [00024c9a00 - 00024c9a68] BOOTMEM [ 0.000000] #23 [00024c9a80 - 00024c9ae8] BOOTMEM [ 0.000000] #24 [00024c9b00 - 00024c9b68] BOOTMEM [ 0.000000] #25 [00024c9b80 - 00024c9be8] BOOTMEM [ 0.000000] #26 [00024c9c00 - 00024c9c68] BOOTMEM [ 0.000000] #27 [00024c9c80 - 00024c9ce8] BOOTMEM [ 0.000000] #28 [00024c9d00 - 00024c9d68] BOOTMEM [ 0.000000] #29 [00024c9d80 - 00024c9de8] BOOTMEM [ 0.000000] #30 [00024c9e00 - 00024c9e68] BOOTMEM [ 0.000000] #31 [00024c9e80 - 00024c9ee8] BOOTMEM [ 0.000000] #32 [00024c9f00 - 00024c9f68] BOOTMEM [ 0.000000] #33 [00024c9f80 - 00024c9fe8] BOOTMEM [ 0.000000] #34 [00024cb000 - 00024cb068] BOOTMEM [ 0.000000] #35 [00024cb080 - 00024cb099] BOOTMEM [ 0.000000] #36 [00024cb0c0 - 00024cb0d9] BOOTMEM [ 0.000000] #37 [0002600000 - 000261b000] BOOTMEM [ 0.000000] #38 [0002700000 - 000271b000] BOOTMEM [ 0.000000] #39 [00024cd100 - 00024cd108] BOOTMEM [ 0.000000] #40 [00024cd140 - 00024cd148] BOOTMEM [ 0.000000] #41 [00024cd180 - 00024cd188] BOOTMEM [ 0.000000] #42 [00024cd1c0 - 00024cd1d0] BOOTMEM [ 0.000000] #43 [00024cd200 - 00024cd340] BOOTMEM [ 0.000000] #44 [00024cd340 - 00024cd3a0] BOOTMEM [ 0.000000] #45 [00024cd3c0 - 00024cd420] BOOTMEM [ 0.000000] #46 [00024cd440 - 00024d5440] BOOTMEM [ 0.000000] #47 [000271b000 - 0002b1b000] BOOTMEM [ 0.000000] #48 [000568a000 - 000588a000] BOOTMEM [ 0.000000] Memory: 3073384k/3144512k available (4414k kernel code, 392k absent, 70736k reserved, 6410k data, 416k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:320 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1828.655 MHz processor. [ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.31 BogoMIPS (lpj=7314620) [ 0.004030] pid_max: default: 32768 minimum: 301 [ 0.004207] Mount-cache hash table entries: 256 [ 0.008071] CPU: Physical Processor ID: 0 [ 0.008077] CPU: Processor Core ID: 0 [ 0.008084] mce: CPU supports 6 MCE banks [ 0.008097] CPU0: Thermal monitoring enabled (TM2) [ 0.008105] using mwait in idle threads. [ 0.008111] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.008125] PEBS disabled due to CPU errata. [ 0.008140] ... version: 2 [ 0.008146] ... bit width: 40 [ 0.008151] ... generic registers: 2 [ 0.008157] ... value mask: 000000ffffffffff [ 0.008163] ... max period: 000000007fffffff [ 0.008170] ... fixed-purpose events: 3 [ 0.008175] ... event mask: 0000000700000003 [ 0.008294] ACPI: Core revision 20100702 [ 0.040194] Setting APIC routing to flat [ 0.040618] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.082618] CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 [ 0.092044] lockdep: fixing up alternatives. [ 0.096167] Booting Node 0, Processors #1 Ok. [ 0.188000] TSC synchronization [CPU#0 -> CPU#1]: [ 0.188000] Measured 566005 cycles TSC warp between CPUs, turning off TSC clock. [ 0.188000] Marking TSC unstable due to check_tsc_sync_source failed [ 0.188067] Brought up 2 CPUs [ 0.188075] Total of 2 processors activated (7314.85 BogoMIPS). [ 0.188685] NET: Registered protocol family 16 [ 0.188685] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.188685] ACPI: bus type pci registered [ 0.192021] PCI: Using configuration type 1 for base access [ 0.204511] bio: create slab <bio-0> at 0 [ 0.215676] ACPI: EC: EC description table is found, configuring boot EC [ 0.244526] ACPI: SSDT 00000000bfef1d36 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.246996] ACPI: Dynamic OEM Table Load: [ 0.247005] ACPI: SSDT (null) 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.247441] ACPI: SSDT 00000000bfef1ffb 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.249988] ACPI: Dynamic OEM Table Load: [ 0.249997] ACPI: SSDT (null) 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.250553] ACPI: SSDT 00000000bfef1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.253061] ACPI: Dynamic OEM Table Load: [ 0.253070] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.253291] ACPI: SSDT 00000000bfef1f76 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.255719] ACPI: Dynamic OEM Table Load: [ 0.255727] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.255798] ACPI: Interpreter enabled [ 0.255805] ACPI: (supports S0 S3 S5) [ 0.255861] ACPI: Using IOAPIC for interrupt routing [ 0.276490] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.276579] ACPI: Power Resource [PUBS] (on) [ 0.280875] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.280886] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.281720] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.281966] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.281966] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) [ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed40fff] (ignored) [ 0.281966] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.281966] pci 0000:00:01.0: PME# disabled [ 0.281966] pci 0000:00:1b.0: reg 10: [mem 0xee400000-0xee403fff 64bit] [ 0.281966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.281966] pci 0000:00:1b.0: PME# disabled [ 0.281966] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.281966] pci 0000:00:1c.0: PME# disabled [ 0.281966] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.281966] pci 0000:00:1c.1: PME# disabled [ 0.281966] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.281966] pci 0000:00:1c.2: PME# disabled [ 0.281966] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.281966] pci 0000:00:1c.3: PME# disabled [ 0.281966] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f] [ 0.281966] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f] [ 0.281966] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f] [ 0.281966] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f] [ 0.281998] pci 0000:00:1d.7: reg 10: [mem 0xee404000-0xee4043ff] [ 0.284116] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.284124] pci 0000:00:1d.7: PME# disabled [ 0.284435] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.284449] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.284461] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.284473] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.284486] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.284576] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.284593] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.284611] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.284628] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.284646] pci 0000:00:1f.1: reg 20: [io 0x1880-0x188f] [ 0.284764] pci 0000:00:1f.2: reg 10: [io 0x18c8-0x18cf] [ 0.284782] pci 0000:00:1f.2: reg 14: [io 0x18ac-0x18af] [ 0.284799] pci 0000:00:1f.2: reg 18: [io 0x18c0-0x18c7] [ 0.284817] pci 0000:00:1f.2: reg 1c: [io 0x18a8-0x18ab] [ 0.284834] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf] [ 0.284852] pci 0000:00:1f.2: reg 24: [mem 0xee404400-0xee4047ff] [ 0.284914] pci 0000:00:1f.2: PME# supported from D3hot [ 0.284921] pci 0000:00:1f.2: PME# disabled [ 0.285052] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff] [ 0.285287] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 0.285330] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] [ 0.285372] pci 0000:01:00.0: reg 18: [mem 0xee100000-0xee10ffff] [ 0.285537] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.285650] pci 0000:01:00.0: supports D1 D2 [ 0.285704] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.285717] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.285727] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.285733] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff] [ 0.285741] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.285966] pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff] [ 0.286017] pci 0000:02:00.0: reg 18: [io 0x3000-0x301f] [ 0.286194] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.286204] pci 0000:02:00.0: PME# disabled [ 0.286239] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.286251] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.286263] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.286270] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] [ 0.286282] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.286535] pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff] [ 0.286918] pci 0000:03:00.0: PME# supported from D0 D3hot [ 0.286933] pci 0000:03:00.0: PME# disabled [ 0.286990] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.287003] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.287014] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff] [ 0.287021] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] [ 0.287033] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.287123] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.287135] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff] [ 0.287143] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.287154] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.287243] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] [ 0.287255] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff] [ 0.287262] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] [ 0.287274] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.287382] pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff] [ 0.287425] pci 0000:15:00.0: supports D1 D2 [ 0.287428] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.287437] pci 0000:15:00.0: PME# disabled [ 0.287541] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.287554] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff] [ 0.287562] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] [ 0.287573] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.287578] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.287581] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode) [ 0.287711] pci_bus 0000:00: on NUMA node 0 [ 0.287717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.288235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.288329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.288424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.288514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.288621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.288727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.304239] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.304457] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.304668] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.304878] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.305087] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.305297] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.305506] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.305716] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.305827] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.305827] vgaarb: loaded [ 0.305827] SCSI subsystem initialized [ 0.305827] libata version 3.00 loaded. [ 0.305827] usbcore: registered new interface driver usbfs [ 0.305827] usbcore: registered new interface driver hub [ 0.305827] usbcore: registered new device driver usb [ 0.305827] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.305827] PCI: Using ACPI for IRQ routing [ 0.305827] PCI: pci_cache_line_size set to 64 bytes [ 0.308219] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.308233] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff [ 0.308310] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.308310] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.308310] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.320055] Switching to clocksource hpet [ 0.328359] pnp: PnP ACPI init [ 0.328420] ACPI: bus type pnp registered [ 0.333541] pnp: PnP ACPI: found 12 devices [ 0.333549] ACPI: ACPI bus type pnp unregistered [ 0.333585] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.333596] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved [ 0.333606] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved [ 0.333615] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.333624] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.333635] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.333645] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.333655] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.333666] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.333676] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.333686] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.333696] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.333706] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.333717] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.333727] system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved [ 0.333750] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.333760] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.333768] system 00:02: [io 0x1180-0x11bf] has been reserved [ 0.333777] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.333786] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.333795] system 00:02: [io 0x1600-0x165f] could not be reserved [ 0.333805] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.333814] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.333824] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.333833] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.333843] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.347759] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.347774] pci 0000:01:00.0: BAR 6: assigned [mem 0xee120000-0xee13ffff pref] [ 0.347784] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.347793] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.347805] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff] [ 0.347816] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.347830] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.347839] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.347853] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] [ 0.347865] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.347883] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.347892] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff] [ 0.347906] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] [ 0.347918] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.347935] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.347944] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff] [ 0.347958] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.347970] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.347987] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] [ 0.348015] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff] [ 0.348029] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] [ 0.348041] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.348060] pci 0000:15:00.0: BAR 9: assigned [mem 0xe0000000-0xe3ffffff pref] [ 0.348071] pci 0000:15:00.0: BAR 10: assigned [mem 0xc4000000-0xc7ffffff] [ 0.348080] pci 0000:15:00.0: BAR 7: assigned [io 0xa000-0xa0ff] [ 0.348089] pci 0000:15:00.0: BAR 8: assigned [io 0xa400-0xa4ff] [ 0.348097] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.348104] pci 0000:15:00.0: bridge window [io 0xa000-0xa0ff] [ 0.348116] pci 0000:15:00.0: bridge window [io 0xa400-0xa4ff] [ 0.348129] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref] [ 0.348143] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] [ 0.348156] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.348165] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff] [ 0.348179] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] [ 0.348191] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.348230] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348242] pci 0000:00:01.0: setting latency timer to 64 [ 0.348261] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.348273] pci 0000:00:1c.0: setting latency timer to 64 [ 0.348291] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.348304] pci 0000:00:1c.1: setting latency timer to 64 [ 0.348322] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.348334] pci 0000:00:1c.2: setting latency timer to 64 [ 0.348354] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.348365] pci 0000:00:1c.3: setting latency timer to 64 [ 0.348375] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.348389] pci 0000:00:1e.0: setting latency timer to 64 [ 0.348409] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348424] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.348427] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.348431] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.348434] pci_bus 0000:01: resource 1 [mem 0xee100000-0xee1fffff] [ 0.348437] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.348441] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.348444] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff] [ 0.348447] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.348450] pci_bus 0000:03: resource 0 [io 0x4000-0x5fff] [ 0.348453] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff] [ 0.348457] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.348460] pci_bus 0000:04: resource 0 [io 0x6000-0x7fff] [ 0.348463] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff] [ 0.348466] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.348470] pci_bus 0000:0c: resource 0 [io 0x8000-0x9fff] [ 0.348473] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff] [ 0.348476] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.348479] pci_bus 0000:15: resource 0 [io 0xa000-0xdfff] [ 0.348482] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff] [ 0.348486] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.348489] pci_bus 0000:15: resource 4 [io 0x0000-0xffff] [ 0.348492] pci_bus 0000:15: resource 5 [mem 0x00000000-0xffffffffffffffff] [ 0.348495] pci_bus 0000:16: resource 0 [io 0xa000-0xa0ff] [ 0.348498] pci_bus 0000:16: resource 1 [io 0xa400-0xa4ff] [ 0.348501] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref] [ 0.348505] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff] [ 0.348654] NET: Registered protocol family 2 [ 0.348929] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.350072] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.353332] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 0.360158] TCP: Hash tables configured (established 262144 bind 65536) [ 0.360239] TCP reno registered [ 0.360256] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.360679] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.361328] NET: Registered protocol family 1 [ 0.361415] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.361418] pci 0000:00:1d.0: Performing full reset [ 0.361444] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.361447] pci 0000:00:1d.1: Performing full reset [ 0.361471] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.361473] pci 0000:00:1d.2: Performing full reset [ 0.361499] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.361501] pci 0000:00:1d.3: Performing full reset [ 0.361599] pci 0000:01:00.0: Boot video device [ 0.361731] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.362103] Simple Boot Flag at 0x35 set to 0x1 [ 0.364937] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.365847] msgmni has been set to 6002 [ 0.366403] io scheduler noop registered [ 0.366443] io scheduler cfq registered (default) [ 0.368272] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1d [ 0.368292] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.368374] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.368575] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1d [ 0.368601] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.368679] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.369001] pcieport 0000:00:1c.1: ACPI _OSC control granted for 0x1d [ 0.369026] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.369104] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.369420] pcieport 0000:00:1c.2: ACPI _OSC control granted for 0x1d [ 0.369446] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.369523] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.369842] pcieport 0000:00:1c.3: ACPI _OSC control granted for 0x1d [ 0.369868] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.369945] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X [ 0.370530] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.370541] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.370552] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 0.370605] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.370614] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.370627] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.370682] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.370691] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.370704] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.370756] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.370769] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.370821] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.370835] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.372874] vesafb: framebuffer at 0xd8000000, mapped to 0xffffc90000080000, using 5120k, total 16384k [ 0.372886] vesafb: mode is 1280x1024x16, linelength=2560, pages=5 [ 0.372894] vesafb: scrolling: redraw [ 0.372900] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.413823] Console: switching to colour frame buffer device 160x64 [ 0.454307] fb0: VESA VGA frame buffer device [ 0.454607] intel_idle: MWAIT substates: 0x22220 [ 0.454610] intel_idle: does not run on family 6 model 15 [ 0.455057] input: Lid Switch as /class/input/input0 [ 0.455547] ACPI: Lid Switch [LID] [ 0.455918] input: Sleep Button as /class/input/input1 [ 0.456231] ACPI: Sleep Button [SLPB] [ 0.456634] input: Power Button as /class/input/input2 [ 0.456879] ACPI: Power Button [PWRF] [ 0.461405] acpi device:05: registered as cooling_device0 [ 0.462190] input: Video Bus as /class/input/input3 [ 0.462426] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 0.525617] Real Time Clock Driver v1.12b [ 0.526298] Non-volatile memory driver v1.3 [ 0.526497] Linux agpgart interface v0.103 [ 0.527387] [drm] Initialized drm 1.1.0 20060810 [ 0.527764] [drm] radeon defaulting to userspace modesetting. [ 0.529949] pci 0000:01:00.0: power state changed by ACPI to D0 [ 0.530248] pci 0000:01:00.0: power state changed by ACPI to D0 [ 0.530542] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.530871] pci 0000:01:00.0: setting latency timer to 64 [ 0.531580] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0 [ 0.533992] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 0.534340] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.538756] loop: module loaded [ 0.538913] Uniform Multi-Platform E-IDE driver [ 0.539371] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02) [ 0.539689] pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 0.540028] piix 0000:00:1f.1: IDE port disabled [ 0.540294] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 0.540618] ide0: BM-DMA at 0x1880-0x1887 [ 0.540829] Probing IDE interface ide0... [ 1.276360] hda: MATSHITADVD-RAM UJ-842, ATAPI CD/DVD-ROM drive [ 1.612208] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.612522] hda: UDMA/33 mode selected [ 1.613035] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.616430] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.616881] ide-gd driver 1.18 [ 1.617134] ide-cd driver 5.00 [ 1.618479] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 1.618904] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.629496] ahci 0000:00:1f.2: version 3.0 [ 1.629519] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.629910] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.630026] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.630411] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.643039] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.643289] scsi0 : ahci [ 1.656271] scsi1 : ahci [ 1.668834] scsi2 : ahci [ 1.681187] scsi3 : ahci [ 1.693565] ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 45 [ 1.705958] ata2: DUMMY [ 1.718134] ata3: DUMMY [ 1.730318] ata4: DUMMY [ 1.742932] tun: Universal TUN/TAP device driver, 1.6 [ 1.755402] tun: (C) 1999-2004 Max Krasnyansky <maxk(a)qualcomm.com> [ 1.768621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.781398] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 1.781639] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1.794562] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1.807150] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.819748] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.819754] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.832707] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.845177] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 1.845183] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 1.845237] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.857613] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.870022] ehci_hcd 0000:00:1d.7: reset command 0080022 (park)=0 ithresh=8 Async period=1024 Reset HALT [ 1.873906] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.873908] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 1.873952] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000 [ 1.886269] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.890165] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.900040] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.912441] usb usb1: default language 0x0409 [ 1.912462] usb usb1: udev 1, busnum 1, minor = 0 [ 1.912466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.924646] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.936838] usb usb1: Product: EHCI Host Controller [ 1.949005] usb usb1: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty ehci_hcd [ 1.961312] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.973878] usb usb1: usb_probe_device [ 1.973882] usb usb1: configuration #1 chosen from 1 choice [ 1.974023] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.974284] hub 1-0:1.0: usb_probe_interface [ 1.974287] hub 1-0:1.0: usb_probe_interface - got id [ 1.974295] hub 1-0:1.0: USB hub found [ 1.986464] hub 1-0:1.0: 8 ports detected [ 1.998516] hub 1-0:1.0: standalone hub [ 1.998519] hub 1-0:1.0: no power switching (usb 1.0) [ 1.998521] hub 1-0:1.0: individual port over-current protection [ 1.998525] hub 1-0:1.0: power on to power good time: 20ms [ 1.998636] hub 1-0:1.0: local power source is good [ 1.998640] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.999251] uhci_hcd: USB Universal Host Controller Interface driver [ 2.011721] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2.024172] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2.036276] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.048405] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.048411] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.060620] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.064041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.084887] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.096951] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.096956] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.097065] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT [ 2.097073] hub 1-0:1.0: port 2: status 0501 change 0001 [ 2.097141] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.097148] hub 1-0:1.0: port 7: status 0501 change 0001 [ 2.097163] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.097169] hub 1-0:1.0: port 8: status 0501 change 0001 [ 2.097195] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.097197] uhci_hcd 0000:00:1d.0: Performing full reset [ 2.097215] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 2.097252] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 2.097359] usb usb2: default language 0x0409 [ 2.097379] usb usb2: udev 1, busnum 2, minor = 128 [ 2.097381] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.097384] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.097387] usb usb2: Product: UHCI Host Controller [ 2.097389] usb usb2: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd [ 2.097391] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.184327] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.197132] usb usb2: usb_probe_device [ 2.197137] usb usb2: configuration #1 chosen from 1 choice [ 2.197155] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.197315] hub 2-0:1.0: usb_probe_interface [ 2.197318] hub 2-0:1.0: usb_probe_interface - got id [ 2.197325] hub 2-0:1.0: USB hub found [ 2.209950] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133 [ 2.210013] hub 2-0:1.0: 2 ports detected [ 2.210016] hub 2-0:1.0: standalone hub [ 2.210018] hub 2-0:1.0: no power switching (usb 1.0) [ 2.210020] hub 2-0:1.0: individual port over-current protection [ 2.210022] hub 2-0:1.0: power on to power good time: 2ms [ 2.210052] hub 2-0:1.0: local power source is good [ 2.210055] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.210333] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 2.210389] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.210407] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.210411] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.210593] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.210604] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.210611] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.210613] uhci_hcd 0000:00:1d.1: Performing full reset [ 2.210630] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 2.210663] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 [ 2.210739] usb usb3: default language 0x0409 [ 2.210758] usb usb3: udev 1, busnum 3, minor = 256 [ 2.210761] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.210764] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.210766] usb usb3: Product: UHCI Host Controller [ 2.210768] usb usb3: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd [ 2.210771] usb usb3: SerialNumber: 0000:00:1d.1 [ 2.210974] usb usb3: usb_probe_device [ 2.210977] usb usb3: configuration #1 chosen from 1 choice [ 2.210994] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.211132] hub 3-0:1.0: usb_probe_interface [ 2.211135] hub 3-0:1.0: usb_probe_interface - got id [ 2.211140] hub 3-0:1.0: USB hub found [ 2.211158] hub 3-0:1.0: 2 ports detected [ 2.211161] hub 3-0:1.0: standalone hub [ 2.211163] hub 3-0:1.0: no power switching (usb 1.0) [ 2.211165] hub 3-0:1.0: individual port over-current protection [ 2.211167] hub 3-0:1.0: power on to power good time: 2ms [ 2.211183] hub 3-0:1.0: local power source is good [ 2.211185] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 2.211453] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 2.211597] hub 1-0:1.0: state 7 ports 8 chg 0184 evt 0000 [ 2.211652] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 2.211753] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion [ 2.211886] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 2.212079] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 2.212091] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.212102] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.212106] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.212284] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.212298] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.212305] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.212307] uhci_hcd 0000:00:1d.2: Performing full reset [ 2.212325] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 2.212359] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 2.212434] usb usb4: default language 0x0409 [ 2.212454] usb usb4: udev 1, busnum 4, minor = 384 [ 2.212457] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.212460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.212462] usb usb4: Product: UHCI Host Controller [ 2.212464] usb usb4: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd [ 2.212467] usb usb4: SerialNumber: 0000:00:1d.2 [ 2.212680] usb usb4: usb_probe_device [ 2.212684] usb usb4: configuration #1 chosen from 1 choice [ 2.212701] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.212845] hub 4-0:1.0: usb_probe_interface [ 2.212847] hub 4-0:1.0: usb_probe_interface - got id [ 2.212852] hub 4-0:1.0: USB hub found [ 2.212864] hub 4-0:1.0: 2 ports detected [ 2.212866] hub 4-0:1.0: standalone hub [ 2.212868] hub 4-0:1.0: no power switching (usb 1.0) [ 2.212870] hub 4-0:1.0: individual port over-current protection [ 2.212872] hub 4-0:1.0: power on to power good time: 2ms [ 2.212887] hub 4-0:1.0: local power source is good [ 2.212890] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 2.213166] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 2.213216] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.213227] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.213231] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.213419] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.213433] uhci_hcd 0000:00:1d.3: detected 2 ports [ 2.213440] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.213442] uhci_hcd 0000:00:1d.3: Performing full reset [ 2.213467] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 2.213544] usb usb5: default language 0x0409 [ 2.213564] usb usb5: udev 1, busnum 5, minor = 512 [ 2.213567] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.213569] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.213572] usb usb5: Product: UHCI Host Controller [ 2.213574] usb usb5: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd [ 2.213576] usb usb5: SerialNumber: 0000:00:1d.3 [ 2.213791] usb usb5: usb_probe_device [ 2.213794] usb usb5: configuration #1 chosen from 1 choice [ 2.213811] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 2.213950] hub 5-0:1.0: usb_probe_interface [ 2.213953] hub 5-0:1.0: usb_probe_interface - got id [ 2.213958] hub 5-0:1.0: USB hub found [ 2.213969] hub 5-0:1.0: 2 ports detected [ 2.213972] hub 5-0:1.0: standalone hub [ 2.213973] hub 5-0:1.0: no power switching (usb 1.0) [ 2.213975] hub 5-0:1.0: individual port over-current protection [ 2.213978] hub 5-0:1.0: power on to power good time: 2ms [ 2.213992] hub 5-0:1.0: local power source is good [ 2.213995] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 2.214276] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3 [ 2.214644] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.222775] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.223011] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.223411] mice: PS/2 mouse device common for all mice [ 2.225003] coretemp coretemp.0: TjMax is assumed as 100 C! [ 2.771584] coretemp coretemp.1: TjMax is assumed as 100 C! [ 2.771855] cpuidle: using governor ladder [ 2.771858] cpuidle: using governor menu [ 2.772246] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.772348] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s [ 2.772392] uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00 [ 2.772399] hub 2-0:1.0: port 2: status 0301 change 0003 [ 2.772482] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 [ 2.772509] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00 [ 2.775109] input: AT Translated Set 2 keyboard as /class/input/input4 [ 2.776017] usbcore: registered new interface driver usbhid [ 2.776019] usbhid: USB HID core driver [ 2.776551] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.776558] hda_intel: probe_mask set to 0x1 for device 17aa:2010 [ 2.776647] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 2.776710] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2.776767] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.777270] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.777274] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.777278] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.777510] ata1.00: configured for UDMA/133 [ 2.788627] ata1.00: configured for UDMA/133 [ 2.788632] ata1: EH complete [ 2.789162] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 [ 2.790257] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.790392] sd 0:0:0:0: [sda] Write Protect is off [ 2.790395] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.790451] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.791974] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.792071] sda: sda1 sda2 sda3 < sda5 > [ 2.923690] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.924317] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion [ 2.924324] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 2.924332] hub 1-0:1.0: port 7 not reset yet, waiting 50ms [ 3.024146] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.024195] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s [ 3.041754] ALSA device list: [ 3.053626] #0: HDA Intel at 0xee400000 irq 46 [ 3.065542] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.076189] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion [ 3.076195] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 3.076202] hub 1-0:1.0: port 8 not reset yet, waiting 50ms [ 3.079218] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.091458] TCP cubic registered [ 3.103388] NET: Registered protocol family 17 [ 3.132035] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.132079] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100 [ 3.132127] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.132140] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.132151] hub 2-0:1.0: state 7 ports 2 chg 0004 evt 0000 [ 3.132172] hub 2-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 3.244029] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 3.376023] usb usb3: suspend_rh (auto-stop) [ 3.376050] usb usb4: suspend_rh (auto-stop) [ 3.410352] usb 2-2: skipped 1 descriptor after interface [ 3.415344] usb 2-2: default language 0x0409 [ 3.432348] usb 2-2: udev 2, busnum 2, minor = 129 [ 3.432351] usb 2-2: New USB device found, idVendor=045e, idProduct=0084 [ 3.444420] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.456484] usb 2-2: Product: Basic Optical Mouse [ 3.468498] usb 2-2: Manufacturer: Microsoft [ 3.480835] usb 2-2: usb_probe_device [ 3.480840] usb 2-2: configuration #1 chosen from 1 choice [ 3.483359] usb 2-2: adding 2-2:1.0 (config #1, interface 0) [ 3.483512] usbhid 2-2:1.0: usb_probe_interface [ 3.483516] usbhid 2-2:1.0: usb_probe_interface - got id [ 3.496818] input: Microsoft Basic Optical Mouse as /class/input/input5 [ 3.509928] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 3.523142] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 3.523156] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 [ 3.523171] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 3.632729] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0 [ 3.645810] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.658990] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 3.700760] input: SynPS/2 Synaptics TouchPad as /class/input/input6 [ 3.718334] EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240) [ 3.735286] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 3.749065] VFS: Mounted root (ext4 filesystem) readonly on device 8:5. [ 3.763242] Freeing unused kernel memory: 416k freed [ 3.768038] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 3.790652] Write protecting the kernel read-only data: 10240k [ 3.805307] Freeing unused kernel memory: 1708k freed [ 3.820378] Freeing unused kernel memory: 1944k freed [ 3.943551] usb 5-1: skipped 1 descriptor after interface [ 3.948534] usb 5-1: default language 0x0409 [ 3.958546] usb 5-1: udev 2, busnum 5, minor = 513 [ 3.958550] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 [ 3.972456] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.986517] usb 5-1: Product: BCM2045B [ 4.000587] usb 5-1: Manufacturer: Broadcom Corp [ 4.015103] usb 5-1: usb_probe_device [ 4.015109] usb 5-1: configuration #1 chosen from 1 choice [ 4.017566] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 4.017909] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 4.018153] usb 5-1: adding 5-1:1.2 (config #1, interface 2) [ 4.018363] usb 5-1: adding 5-1:1.3 (config #1, interface 3) [ 4.018755] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00 [ 4.018771] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 4.144046] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 4.256042] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 4.388040] usb 5-2: ep0 maxpacket = 8 [ 4.411530] usb 5-2: default language 0x0409 [ 4.430536] usb 5-2: udev 3, busnum 5, minor = 514 [ 4.430540] usb 5-2: New USB device found, idVendor=0483, idProduct=2016 [ 4.445937] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.460979] usb 5-2: Product: Biometric Coprocessor [ 4.476073] usb 5-2: Manufacturer: STMicroelectronics [ 4.491456] usb 5-2: usb_probe_device [ 4.491460] usb 5-2: configuration #1 chosen from 1 choice [ 4.493540] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 4.494230] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.808208] hub 1-0:1.0: hub_suspend [ 5.808297] usb usb1: bus auto-suspend [ 5.808301] ehci_hcd 0000:00:1d.7: suspend root hub [ 5.808417] hub 3-0:1.0: hub_suspend [ 5.808425] usb usb3: bus auto-suspend [ 5.808437] usb usb3: suspend_rh [ 5.808461] hub 4-0:1.0: hub_suspend [ 5.808469] usb usb4: bus auto-suspend [ 5.808472] usb usb4: suspend_rh [ 9.426310] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 9.679115] input: TPPS/2 IBM TrackPoint as /class/input/input7 [ 20.584555] udev: starting version 146 [ 20.584557] <3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly [ 20.616606] udevd (1267): /proc/1267/oom_adj is deprecated, please use /proc/1267/oom_score_adj instead. [ 21.179313] ACPI: acpi_idle registered with cpuidle [ 21.252765] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 21.277359] ACPI: AC Adapter [AC] (on-line) [ 21.277756] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 21.277816] e1000e 0000:02:00.0: Disabling ASPM L1 [ 21.277844] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.277862] e1000e 0000:02:00.0: setting latency timer to 64 [ 21.278131] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X [ 21.278523] e1000e 0000:02:00.0: Disabling ASPM L0s [ 21.368477] Monitor-Mwait will be used to enter C-1 state [ 21.372121] Monitor-Mwait will be used to enter C-2 state [ 21.376132] Monitor-Mwait will be used to enter C-3 state [ 21.392885] ACPI: Battery Slot [BAT0] (battery present) [ 21.394781] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:e3:2c:76 [ 21.394785] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 21.394924] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003 [ 21.463448] thermal LNXTHERM:01: registered as thermal_zone0 [ 21.481781] cfg80211: Calling CRDA to update world regulatory domain [ 21.505004] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 21.506107] ACPI: Thermal Zone [THM0] (59 C) [ 21.507768] thermal LNXTHERM:02: registered as thermal_zone1 [ 21.507792] ACPI: Thermal Zone [THM1] (66 C) [ 21.511001] irda_init() [ 21.511111] NET: Registered protocol family 23 [ 21.593724] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 21.613694] thinkpad_acpi: ThinkPad BIOS 79ETD9WW (2.19 ), EC 79HT50WW-1.07 [ 21.634604] Bluetooth: Core ver 2.15 [ 21.635518] thinkpad_acpi: Lenovo ThinkPad T60, model 2007FUG [ 21.635521] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware [ 21.635523] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features [ 21.638617] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 21.638845] thinkpad_acpi: radio switch found; radios are enabled [ 21.646954] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it [ 21.646957] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation [ 21.657172] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 21.659680] Registered led device: tpacpi::thinklight [ 21.660203] Registered led device: tpacpi::power [ 21.660883] Registered led device: tpacpi::standby [ 21.661265] Registered led device: tpacpi::thinkvantage [ 21.664102] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 21.665786] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 21.672486] input: ThinkPad Extra Buttons as /class/input/input8 [ 21.772560] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 21.772563] iwl3945: Copyright(c) 2003-2010 Intel Corporation [ 21.772782] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 21.772799] iwl3945 0000:03:00.0: setting latency timer to 64 [ 21.826605] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 21.826609] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 21.826804] iwl3945 0000:03:00.0: irq 48 for MSI/MSI-X [ 21.833238] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 21.847961] nsc-ircc 00:0a: activated [ 21.847966] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 21.848339] nsc-ircc, chip->init [ 21.848354] nsc-ircc, Found chip at base=0x164e [ 21.848396] nsc-ircc, driver loaded (Dag Brattli) [ 21.850065] IrDA: Registered device irda0 [ 21.850069] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 22.065402] NET: Registered protocol family 31 [ 22.065405] Bluetooth: HCI device and connection manager initialized [ 22.065487] Bluetooth: HCI socket layer initialized [ 22.141593] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 22.141636] btusb 5-1:1.0: usb_probe_interface [ 22.141639] btusb 5-1:1.0: usb_probe_interface - got id [ 22.142165] btusb 5-1:1.2: usb_probe_interface [ 22.142168] btusb 5-1:1.2: usb_probe_interface - got id [ 22.142230] btusb 5-1:1.3: usb_probe_interface [ 22.142232] btusb 5-1:1.3: usb_probe_interface - got id [ 22.142276] usbcore: registered new interface driver btusb [ 22.338837] Adding 1542200k swap on /dev/sda1. Priority:-1 extents:1 across:1542200k SS [ 22.397499] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr [ 22.497332] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr [ 23.289790] EXT3-fs: barriers not enabled [ 23.304152] kjournald starting. Commit interval 5 seconds [ 23.318151] EXT3-fs (sda2): using internal journal [ 23.332248] EXT3-fs (sda2): mounted filesystem with writeback data mode [ 23.523596] fuse init (API version 7.15) [ 25.220782] [drm] Setting GART location based on new memory map [ 25.221561] [drm] Loading R500 Microcode [ 25.222163] [drm] Num pipes: 1 [ 25.222179] [drm] writeback test succeeded in 2 usecs [ 25.604249] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us [ 26.094649] Bluetooth: L2CAP ver 2.15 [ 26.094655] Bluetooth: L2CAP socket layer initialized [ 26.147809] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.147814] Bluetooth: BNEP filters: protocol multicast [ 26.181860] Bluetooth: SCO (Voice Link) ver 0.6 [ 26.181864] Bluetooth: SCO socket layer initialized [ 26.190291] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us [ 26.348060] Bluetooth: RFCOMM TTY layer initialized [ 26.348074] Bluetooth: RFCOMM socket layer initialized [ 26.348077] Bluetooth: RFCOMM ver 1.11 [ 30.080907] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X [ 30.136263] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X [ 30.153545] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 32.298941] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 32.298949] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 33.628610] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 35.234095] RPC: Registered udp transport module. [ 35.234101] RPC: Registered tcp transport module. [ 35.234104] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 41.384898] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 51.614500] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 61.226257] wlan0: deauthenticating from 00:27:19:16:04:fa by local choice (reason=3) [ 61.229462] wlan0: authenticate with 00:27:19:16:04:fa (try 1) [ 61.232450] wlan0: authenticated [ 61.234072] wlan0: associate with 00:27:19:16:04:fa (try 1) [ 61.236955] wlan0: RX AssocResp from 00:27:19:16:04:fa (capab=0x431 status=0 aid=3) [ 61.236962] wlan0: associated [ 61.244315] wlan0: deauthenticated from 00:27:19:16:04:fa (Reason: 7) [ 61.256989] cfg80211: Calling CRDA to update world regulatory domain [ 61.761554] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 63.946342] wlan0: authenticate with 00:27:19:16:04:fa (try 1) [ 63.948231] wlan0: authenticated [ 63.948391] wlan0: associate with 00:27:19:16:04:fa (try 1) [ 63.950846] wlan0: RX AssocResp from 00:27:19:16:04:fa (capab=0x431 status=0 aid=5) [ 63.950853] wlan0: associated [ 71.774631] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 81.854673] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 91.917681] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 101.997769] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 112.027842] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 122.257803] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 132.287885] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 142.400870] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 152.480920] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 173.023815] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 193.566699] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 214.093578] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 234.369630] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 254.713618] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 274.972647] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 294.183288] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 304.096138] EXT4-fs (sda5): error count: 239 [ 304.096151] EXT4-fs (sda5): initial error at 1282834433: ext4_readdir:157: inode 212849 [ 304.096161] EXT4-fs (sda5): last error at 1282835128: ext4_readdir:157: inode 212907 [ 314.443344] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 334.769353] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 355.162305] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 375.280446] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 395.615428] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 415.825477] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 435.202031] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 455.678940] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61 [ 1651.552107] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=66.220.147.26 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=29298 DF PROTO=TCP SPT=56001 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A000527E077965DC1) [ 1657.568086] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=80.249.165.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62180 DF PROTO=TCP SPT=40163 DPT=80 WINDOW=91 RES=0x00 ACK FIN URGP=0 OPT (0101080A00052DC0D809F3AE) [ 1657.696093] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.63.181.49 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39253 DF PROTO=TCP SPT=37212 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 OPT (0101080A00052DE0778F2045) [ 1666.912123] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.123.68.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53492 DF PROTO=TCP SPT=36635 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A000536E010646B5B) [ 1666.913253] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.123.68.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16011 DF PROTO=TCP SPT=36638 DPT=80 WINDOW=272 RES=0x00 ACK FIN URGP=0 OPT (0101080A000536E010646BAC) [ 1674.976060] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.122.217.40 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22867 DF PROTO=TCP SPT=56201 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A00053EC0163B52F3) [ 1702.240076] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=80.249.165.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=30937 DF PROTO=TCP SPT=40186 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 OPT (0101080A00055960D80A20BA) [ 1716.448080] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.123.68.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=20694 DF PROTO=TCP SPT=36664 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 OPT (0101080A00056740106489F9) [ 2471.392095] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16717 DF PROTO=TCP SPT=35311 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A00084880210467DF) [ 2531.424110] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58622 DF PROTO=TCP SPT=55494 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008832021047F4F) [ 4187.104136] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=20383 DF PROTO=TCP SPT=44196 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A000ED4002106FDD7) [ 5321.184104] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37211 DF PROTO=TCP SPT=43457 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A001327802108B309) [ 9325.664086] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=91.189.94.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31410 DF PROTO=TCP SPT=44621 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A00226E20145E8A5A) [ 9325.664153] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=91.189.94.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42686 DF PROTO=TCP SPT=44619 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A00226E20145E8A5A) [ 9325.664199] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=91.189.94.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=51599 DF PROTO=TCP SPT=44620 DPT=80 WINDOW=145 RES=0x00 ACK FIN URGP=0 OPT (0101080A00226E20145E8A5A) [ 9782.752110] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=19184 DF PROTO=TCP SPT=42559 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0 [ 9786.848144] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=23185 DF PROTO=TCP SPT=42560 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0 [ 9796.064101] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.78 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=62371 DF PROTO=TCP SPT=45784 DPT=80 WINDOW=525 RES=0x00 ACK FIN URGP=0 [ 9805.280113] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.77 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=28595 DF PROTO=TCP SPT=47167 DPT=80 WINDOW=206 RES=0x00 ACK FIN URGP=0 [ 9816.800073] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12081 DF PROTO=TCP SPT=42581 DPT=80 WINDOW=434 RES=0x00 ACK FIN URGP=0 [ 9865.568103] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=66.196.65.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44200 DF PROTO=TCP SPT=59036 DPT=80 WINDOW=101 RES=0x00 ACK FIN URGP=0 OPT (0101080A00247D608DB3593F) [ 9874.656107] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=66.196.65.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21578 DF PROTO=TCP SPT=59035 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0 OPT (0101080A00248640724BF549) [ 9891.168152] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12598 DF PROTO=TCP SPT=42630 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0 [ 9902.816121] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.147.123.63 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=44708 DF PROTO=TCP SPT=53299 DPT=80 WINDOW=365 RES=0x00 ACK FIN URGP=0 [ 9904.864101] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.77 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=51208 DF PROTO=TCP SPT=47246 DPT=80 WINDOW=183 RES=0x00 ACK FIN URGP=0 [ 9905.888098] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=48629 DF PROTO=TCP SPT=42658 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0 [ 9944.544109] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.147.123.63 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=32562 DF PROTO=TCP SPT=53355 DPT=80 WINDOW=160 RES=0x00 ACK FIN URGP=0 [ 9944.544201] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.147.123.63 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=31064 DF PROTO=TCP SPT=53357 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 [14076.512085] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=195.111.192.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37133 DF PROTO=TCP SPT=43055 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00348DA01B812E86) [24556.438376] [24556.438378] ======================================================= [24556.438384] [ INFO: possible circular locking dependency detected ] [24556.438387] 2.6.36-rc6-00084-gc6ea21e-dirty #99 [24556.438390] ------------------------------------------------------- [24556.438393] sh/19063 is trying to acquire lock: [24556.438395] (s_active#121){++++.+}, at: [<ffffffff8111f29a>] sysfs_addrm_finish+0x31/0x5a [24556.438407] [24556.438408] but task is already holding lock: [24556.438410] (dbs_mutex){+.+.+.}, at: [<ffffffff8138642d>] cpufreq_governor_dbs+0x37c/0x427 [24556.438420] [24556.438421] which lock already depends on the new lock. [24556.438422] [24556.438424] [24556.438425] the existing dependency chain (in reverse order) is: [24556.438427] [24556.438428] -> #2 (dbs_mutex){+.+.+.}: [24556.438433] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa [24556.438440] [<ffffffff81068ecb>] lock_acquire+0xef/0x115 [24556.438445] [<ffffffff8144a677>] mutex_lock_nested+0x4b/0x2e6 [24556.438451] [<ffffffff81386127>] cpufreq_governor_dbs+0x76/0x427 [24556.438456] [<ffffffff81382e16>] __cpufreq_governor+0x10b/0x14c [24556.438461] [<ffffffff81382f5b>] __cpufreq_set_policy+0x104/0x142 [24556.438465] [<ffffffff81384a51>] store_scaling_governor+0x190/0x1ca [24556.438470] [<ffffffff81383f4f>] store+0x56/0x79 [24556.438474] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f [24556.438480] [<ffffffff810ccfe6>] vfs_write+0xae/0x136 [24556.438487] [<ffffffff810cd127>] sys_write+0x45/0x6c [24556.438491] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b [24556.438497] [24556.438498] -> #1 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}: [24556.438503] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa [24556.438508] [<ffffffff81068ecb>] lock_acquire+0xef/0x115 [24556.438512] [<ffffffff8144ab7f>] down_write+0x2c/0x4f [24556.438517] [<ffffffff81382c80>] lock_policy_rwsem_write+0x4a/0x7a [24556.438522] [<ffffffff81383f32>] store+0x39/0x79 [24556.438526] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f [24556.438531] [<ffffffff810ccfe6>] vfs_write+0xae/0x136 [24556.438536] [<ffffffff810cd127>] sys_write+0x45/0x6c [24556.438540] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b [24556.438545] [24556.438546] -> #0 (s_active#121){++++.+}: [24556.438552] [<ffffffff81067ee6>] validate_chain+0x727/0xd23 [24556.438557] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa [24556.438561] [<ffffffff81068ecb>] lock_acquire+0xef/0x115 [24556.438566] [<ffffffff8111e87e>] sysfs_deactivate+0x8e/0xcb [24556.438571] [<ffffffff8111f29a>] sysfs_addrm_finish+0x31/0x5a [24556.438575] [<ffffffff8111d236>] sysfs_hash_and_remove+0x54/0x78 [24556.438580] [<ffffffff8112074c>] sysfs_remove_group+0x90/0xc9 [24556.438584] [<ffffffff81386441>] cpufreq_governor_dbs+0x390/0x427 [24556.438589] [<ffffffff81382e16>] __cpufreq_governor+0x10b/0x14c [24556.438594] [<ffffffff81382f45>] __cpufreq_set_policy+0xee/0x142 [24556.438599] [<ffffffff81384a51>] store_scaling_governor+0x190/0x1ca [24556.438604] [<ffffffff81383f4f>] store+0x56/0x79 [24556.438608] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f [24556.438613] [<ffffffff810ccfe6>] vfs_write+0xae/0x136 [24556.438617] [<ffffffff810cd127>] sys_write+0x45/0x6c [24556.438622] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b [24556.438627] [24556.438628] other info that might help us debug this: [24556.438629] [24556.438632] 4 locks held by sh/19063: [24556.438634] #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff8111db56>] sysfs_write_file+0x37/0x13f [24556.438642] #1: (s_active#120){.+.+.+}, at: [<ffffffff8111dc01>] sysfs_write_file+0xe2/0x13f [24556.438651] #2: (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at: [<ffffffff81382c80>] lock_policy_rwsem_write+0x4a/0x7a [24556.438659] #3: (dbs_mutex){+.+.+.}, at: [<ffffffff8138642d>] cpufreq_governor_dbs+0x37c/0x427 [24556.438667] [24556.438667] stack backtrace: [24556.438671] Pid: 19063, comm: sh Not tainted 2.6.36-rc6-00084-gc6ea21e-dirty #99 [24556.438674] Call Trace: [24556.438679] [<ffffffff810670c3>] print_circular_bug+0xae/0xbd [24556.438684] [<ffffffff81067ee6>] validate_chain+0x727/0xd23 [24556.438689] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa [24556.438694] [<ffffffff81066798>] ? mark_held_locks+0x52/0x70 [24556.438699] [<ffffffff81065450>] ? lockdep_init_map+0x9b/0x4fb [24556.438703] [<ffffffff8111f29a>] ? sysfs_addrm_finish+0x31/0x5a [24556.438707] [<ffffffff81068ecb>] lock_acquire+0xef/0x115 [24556.438711] [<ffffffff8111f29a>] ? sysfs_addrm_finish+0x31/0x5a [24556.438716] [<ffffffff8111e87e>] sysfs_deactivate+0x8e/0xcb [24556.438720] [<ffffffff8111f29a>] ? sysfs_addrm_finish+0x31/0x5a [24556.438725] [<ffffffff8111f29a>] sysfs_addrm_finish+0x31/0x5a [24556.438730] [<ffffffff8111d236>] sysfs_hash_and_remove+0x54/0x78 [24556.438734] [<ffffffff8112074c>] sysfs_remove_group+0x90/0xc9 [24556.438739] [<ffffffff81386441>] cpufreq_governor_dbs+0x390/0x427 [24556.438744] [<ffffffff81382e16>] __cpufreq_governor+0x10b/0x14c [24556.438749] [<ffffffff81382f45>] __cpufreq_set_policy+0xee/0x142 [24556.438754] [<ffffffff81384a51>] store_scaling_governor+0x190/0x1ca [24556.438758] [<ffffffff81384874>] ? handle_update+0x0/0xe [24556.438763] [<ffffffff81383f4f>] store+0x56/0x79 [24556.438768] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f [24556.438773] [<ffffffff810ccfe6>] vfs_write+0xae/0x136 [24556.438777] [<ffffffff810cd127>] sys_write+0x45/0x6c [24556.438782] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b [24556.659027] [drm] Num pipes: 1 [24556.699853] wlan0: deauthenticating from 00:27:19:16:04:fa by local choice (reason=3) [24556.712097] cfg80211: Calling CRDA to update world regulatory domain [24556.749422] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us [24556.803392] PM: Syncing filesystems ... done. [24556.858170] Freezing user space processes ... (elapsed 0.01 seconds) done. [24556.872115] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [24556.888111] Suspending console(s) (use no_console_suspend to debug) [24556.928402] usb 5-2: usb suspend [24556.929620] btusb_intr_complete: hci0 urb ffff8800b8f0ce00 failed to resubmit (1) [24556.929626] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us [24556.930622] btusb_bulk_complete: hci0 urb ffff8800b8f0ca40 failed to resubmit (1) [24556.931621] btusb_bulk_complete: hci0 urb ffff8800b8f0c980 failed to resubmit (1) [24556.931641] usb 5-1: usb suspend [24557.083914] usb 2-2: usb suspend [24557.083954] sd 0:0:0:0: [sda] Synchronizing SCSI cache [24557.084103] sd 0:0:0:0: [sda] Stopping disk [24557.130236] hub 5-0:1.0: hub_suspend [24557.130242] usb usb5: bus suspend [24557.130245] usb usb5: suspend_rh [24557.130289] hub 2-0:1.0: hub_suspend [24557.130294] usb usb2: bus suspend [24557.130296] usb usb2: suspend_rh [24557.131578] nsc-ircc 00:0a: disabled [24557.132114] pci 0000:01:00.0: PCI INT A disabled [24557.132208] PIIX_IDE 0000:00:1f.1: PCI INT C disabled [24557.132277] ehci_hcd 0000:00:1d.7: PCI INT D disabled [24557.132283] uhci_hcd 0000:00:1d.3: uhci_pci_suspend [24557.132297] uhci_hcd 0000:00:1d.3: PCI INT D disabled [24557.132303] uhci_hcd 0000:00:1d.2: uhci_pci_suspend [24557.132319] uhci_hcd 0000:00:1d.2: PCI INT C disabled [24557.132326] uhci_hcd 0000:00:1d.1: uhci_pci_suspend [24557.132341] uhci_hcd 0000:00:1d.1: PCI INT B disabled [24557.132346] uhci_hcd 0000:00:1d.0: uhci_pci_suspend [24557.132363] uhci_hcd 0000:00:1d.0: PCI INT A disabled [24557.132374] e1000e 0000:02:00.0: PCI INT A disabled [24557.132386] e1000e 0000:02:00.0: PME# enabled [24557.132398] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI [24557.236106] HDA Intel 0000:00:1b.0: PCI INT B disabled [24557.392044] PM: suspend of devices complete after 502.423 msecs [24557.392520] ehci_hcd 0000:00:1d.7: wakeup: 0 [24557.436028] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [24557.436033] ehci_hcd 0000:00:1d.7: --> PCI D3hot [24557.436065] uhci_hcd 0000:00:1d.3: wakeup: 0 [24557.436069] uhci_hcd 0000:00:1d.3: --> PCI D0 [24557.436101] uhci_hcd 0000:00:1d.2: wakeup: 0 [24557.460040] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3 [24557.460042] uhci_hcd 0000:00:1d.2: --> PCI D3hot [24557.460074] uhci_hcd 0000:00:1d.1: wakeup: 0 [24557.460078] uhci_hcd 0000:00:1d.1: --> PCI D0 [24557.460109] uhci_hcd 0000:00:1d.0: wakeup: 0 [24557.484039] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [24557.484042] uhci_hcd 0000:00:1d.0: --> PCI D3hot [24557.484070] PM: late suspend of devices complete after 92.021 msecs [24557.484321] ACPI: Preparing to enter system sleep state S3 [24557.644056] PM: Saving platform NVS memory [24557.644059] Disabling non-boot CPUs ... [24557.796032] CPU 1 is now offline [24557.796034] lockdep: fixing up alternatives. [24557.796038] SMP alternatives: switching to UP code [24557.802701] Extended CMOS year: 2000 [24557.802701] Back to C! [24557.802701] PM: Restoring platform NVS memory [24557.802701] Extended CMOS year: 2000 [24557.802701] Enabling non-boot CPUs ... [24557.804046] lockdep: fixing up alternatives. [24557.804049] SMP alternatives: switching to SMP code [24557.809957] Booting Node 0 Processor 1 APIC 0x1 [24557.972035] CPU1 is up [24557.972393] ACPI: Waking up from system sleep state S3 [24558.324115] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [24558.324183] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [24558.324232] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc011c001) [24558.324251] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [24558.324331] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [24558.324402] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20007060, writing 0x7060) [24558.324417] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [24558.324473] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b) [24558.324489] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421) [24558.324495] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00) [24558.324502] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x9080) [24558.324513] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [24558.324522] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [24558.368027] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [24558.376039] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [24558.376071] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [24558.384038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [24558.392038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [24558.392071] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [24558.400038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [24558.408038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [24558.408069] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [24558.416038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [24558.424038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [24558.424072] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [24558.424120] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [24558.432038] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [24558.440038] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [24558.440079] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [24558.440218] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [24558.440832] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [24558.440963] pci 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3c0010b) [24558.440971] pci 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0xa4fc) [24558.440978] pci 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0xa400) [24558.440986] pci 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0xa0fc) [24558.440993] pci 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0xa000) [24558.441001] pci 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0xc7fff000) [24558.441009] pci 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xc4000000) [24558.441016] pci 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000) [24558.441024] pci 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000) [24558.441031] pci 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615) [24558.441041] pci 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000) [24558.441049] pci 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808) [24558.441059] pci 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [24558.441170] PM: early resume of devices complete after 117.123 msecs [24558.441273] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [24558.441286] HDA Intel 0000:00:1b.0: setting latency timer to 64 [24558.441357] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X [24558.441458] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [24558.441466] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [24558.441471] uhci_hcd 0000:00:1d.1: uhci_pci_resume [24558.441476] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2f00 [24558.441479] uhci_hcd 0000:00:1d.1: Performing full reset [24558.441485] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [24558.441504] usb usb3: root hub lost power or was reset [24558.441534] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [24558.441548] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [24558.441554] uhci_hcd 0000:00:1d.3: uhci_pci_resume [24558.441559] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000 [24558.441562] uhci_hcd 0000:00:1d.3: Performing full reset [24558.441597] usb usb5: root hub lost power or was reset [24558.441634] pci 0000:00:1e.0: setting latency timer to 64 [24558.441651] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [24558.441657] PIIX_IDE 0000:00:1f.1: setting latency timer to 64 [24558.441696] ahci 0000:00:1f.2: setting latency timer to 64 [24558.441733] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [24558.441739] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [24558.441751] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [24558.441755] uhci_hcd 0000:00:1d.0: uhci_pci_resume [24558.441760] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000 [24558.441762] uhci_hcd 0000:00:1d.0: Performing full reset [24558.441778] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI [24558.441791] e1000e 0000:02:00.0: PME# disabled [24558.441792] usb usb2: root hub lost power or was reset [24558.442002] e1000e 0000:02:00.0: Disabling ASPM L1 [24558.442004] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [24558.442067] pci 0000:01:00.0: power state changed by ACPI to D0 [24558.442085] pci 0000:01:00.0: power state changed by ACPI to D0 [24558.442092] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X [24558.442111] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [24558.442132] pci 0000:01:00.0: setting latency timer to 64 [24558.442215] usb usb2: usb resume [24558.442218] usb usb2: wakeup_rh [24558.442234] usb usb3: usb resume [24558.442236] usb usb3: wakeup_rh [24558.442310] usb usb5: usb resume [24558.442312] usb usb5: wakeup_rh [24558.442375] sd 0:0:0:0: [sda] Starting disk [24558.443020] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [24558.443184] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [24558.443191] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [24558.443199] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [24558.443204] uhci_hcd 0000:00:1d.2: uhci_pci_resume [24558.443208] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [24558.443211] uhci_hcd 0000:00:1d.2: Performing full reset [24558.443248] usb usb4: root hub lost power or was reset [24558.443264] usb usb4: usb resume [24558.443266] usb usb4: wakeup_rh [24558.445408] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [24558.445674] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [24558.445688] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [24558.445745] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [24558.445836] usb usb1: usb resume [24558.445847] ehci_hcd 0000:00:1d.7: resume root hub [24558.456076] hub 2-0:1.0: hub_reset_resume [24558.456082] hub 2-0:1.0: trying to enable port power on non-switchable hub [24558.456105] hub 3-0:1.0: hub_reset_resume [24558.456110] hub 3-0:1.0: trying to enable port power on non-switchable hub [24558.456126] hub 5-0:1.0: hub_reset_resume [24558.456131] hub 5-0:1.0: trying to enable port power on non-switchable hub [24558.456148] hub 4-0:1.0: hub_reset_resume [24558.456152] hub 4-0:1.0: trying to enable port power on non-switchable hub [24558.463541] nsc-ircc 00:0a: activated [24558.467693] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [24558.467943] hda: UDMA/33 mode selected [24558.480120] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion [24558.560113] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 [24558.560119] hub 5-0:1.0: port 1: status 0100 change 0003 [24558.560137] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00 [24558.560142] hub 5-0:1.0: port 2: status 0100 change 0003 [24558.560174] uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00 [24558.560179] hub 2-0:1.0: port 2: status 0301 change 0003 [24558.576255] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion [24558.576261] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0 ACK POWER OWNER sig=j CONNECT [24558.576504] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion [24558.576508] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT [24558.576517] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [24558.592081] hub 1-0:1.0: hub_resume [24558.592114] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC [24558.592128] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0 ACK POWER OWNER sig=se0 CSC [24558.696101] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 [24558.696111] usb 2-2: finish reset-resume [24558.696115] usb 5-1: finish reset-resume [24558.696128] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00 [24558.696137] usb 5-2: finish reset-resume [24558.760086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [24558.760599] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24558.760603] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24558.760607] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24558.762131] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24558.762135] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24558.762139] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24558.762498] ata1.00: configured for UDMA/133 [24558.776974] ata1.00: configured for UDMA/133 [24558.776978] ata1: EH complete [24558.956062] usb 2-2: reset low speed USB device using uhci_hcd and address 2 [24559.356087] usb 5-1: reset full speed USB device using uhci_hcd and address 2 [24559.502349] btusb 5-1:1.0: no reset_resume for driver btusb? [24559.502353] btusb 5-1:1.1: no reset_resume for driver btusb? [24559.502356] btusb 5-1:1.0: forced unbind [24559.592086] usb usb3: suspend_rh (auto-stop) [24559.592111] usb usb4: suspend_rh (auto-stop) [24559.600086] usb 5-2: reset full speed USB device using uhci_hcd and address 3 [24559.732050] usb 5-2: ep0 maxpacket = 8 [24559.754571] PM: resume of devices complete after 1313.353 msecs [24559.754659] btusb 5-1:1.0: usb_probe_interface [24559.754662] btusb 5-1:1.0: usb_probe_interface - got id [24559.757895] Restarting tasks ... [24559.757938] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [24559.757956] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [24559.757969] hub 2-0:1.0: state 7 ports 2 chg 0004 evt 0000 [24559.757990] hub 2-0:1.0: port 2, status 0303, change 0000, 1.5 Mb/s [24559.758001] hub 5-0:1.0: state 7 ports 2 chg 0006 evt 0006 [24559.758017] hub 5-0:1.0: port 1, status 0103, change 0000, 12 Mb/s [24559.758033] hub 5-0:1.0: port 2, status 0103, change 0000, 12 Mb/s [24559.758043] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 [24559.784334] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us [24559.787809] done. [24559.787823] video LNXVIDEO:01: Restoring backlight state [24559.862350] [drm] Num pipes: 1 [24560.085624] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us [24560.496478] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X [24560.552211] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X [24561.824104] hub 4-0:1.0: hub_suspend [24561.824121] usb usb4: bus auto-suspend [24561.824127] usb usb4: suspend_rh [24561.824155] hub 3-0:1.0: hub_suspend [24561.824165] usb usb3: bus auto-suspend [24561.824170] usb usb3: suspend_rh [24561.824194] hub 1-0:1.0: hub_suspend [24561.824204] usb usb1: bus auto-suspend [24561.824209] ehci_hcd 0000:00:1d.7: suspend root hub [24562.158720] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [24562.158732] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [24570.870068] wlan0: deauthenticating from 00:27:19:16:04:fa by local choice (reason=3) [24570.883288] wlan0: authenticate with 00:27:19:16:04:fa (try 1) [24570.885197] wlan0: authenticated [24570.885266] wlan0: associate with 00:27:19:16:04:fa (try 1) [24570.887675] wlan0: RX AssocResp from 00:27:19:16:04:fa (capab=0x431 status=0 aid=4) [24570.887682] wlan0: associated [24633.952084] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=88.209.222.127 LEN=196 TOS=0x10 PREC=0x00 TTL=64 ID=23342 DF PROTO=TCP SPT=52499 DPT=22 WINDOW=501 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD3A0017F775F) [24636.640084] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=74.125.43.105 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=64533 DF PROTO=TCP SPT=54502 DPT=80 WINDOW=203 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD640A326EB96) [24636.768080] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=195.135.221.39 LEN=89 TOS=0x00 PREC=0x00 TTL=64 ID=20778 DF PROTO=TCP SPT=36890 DPT=993 WINDOW=4560 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD66012B71780) [24637.856087] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=74.125.43.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=60716 DF PROTO=TCP SPT=58428 DPT=80 WINDOW=54 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD770F2904CF1) [24637.856175] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.122.212.24 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=49726 DF PROTO=TCP SPT=46810 DPT=80 WINDOW=54 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD7701CC60B9A) [24671.584087] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=216.34.181.45 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47646 DF PROTO=TCP SPT=41016 DPT=80 WINDOW=524 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CF86078EF0CB3) [30470.008057] CE: hpet increased min_delta_ns to 7500 nsec [31534.592070] CE: hpet increased min_delta_ns to 11250 nsec [32085.088181] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=199.6.1.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=17838 DF PROTO=TCP SPT=49116 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00794020AAD173F9) [32086.112141] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=199.6.1.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=41980 DF PROTO=TCP SPT=49115 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00794120AAD173F1)

3 9

[alsa-devel] Alsamixer-Qt4 0.6.0 released
by Sebastian H. 02 Nov '10

02 Nov '10

Hello ALSA users The new Alsamixer-Qt4 0.6.0 is now available at http://xwmw.org/alsamixer-qt4/ http://sourceforge.net/projects/alsamixer-qt4/files/ Changes (from the CHANGELOG): * New support for string localization (i18n) * German string translations (l10n) * Reintroduced some aspects of the old (0.5.1) widget style * Slight color and contrast enhancements * ToolTips hold playback/capture informations * Requires Qt version 4.6 at minimum (4.4 before) Regards, Sebastian Holtermann

1 0

[alsa-devel] ASoC update for 2.6.37
by Mark Brown 02 Nov '10

02 Nov '10

The following changes since commit 5a0b07433ddd808ecbb5f4287b61be6fa7af1b57: ASoC: Update WARN uses in wm_hubs (2010-11-01 15:44:57 -0400) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.37 Eric Miao (1): ASoC: fix the building issue of missing codec field in 'struct snd_soc_card' This is a clearly focused build fix. I'll do a merge up of 2.6.37-rc1 once this is pulled if that's OK? sound/soc/pxa/tosa.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)

2 1

[alsa-devel] [PATCH] mfd: Add initial WM8958 support
by Mark Brown 02 Nov '10

02 Nov '10

The WM8958 is a derivative of the WM8994 which is register compatible with the addition of some extra features, mostly in the CODEC side. The major change visible at the MFD level is that rather than a single DBVDD supply we now have three separate DBVDDs so we must request and enable a different set of supplies. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- Since subsequent CODEC patches will depend on this I'd like to merge via ASoC if possible. drivers/mfd/wm8994-core.c | 93 +++++++++++++++++++++++++++++++-------- include/linux/mfd/wm8994/core.h | 8 +++ 2 files changed, 82 insertions(+), 19 deletions(-) diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index b3b2aaf..8d221ba 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -218,6 +218,18 @@ static const char *wm8994_main_supplies[] = { "SPKVDD2", }; +static const char *wm8958_main_supplies[] = { + "DBVDD1", + "DBVDD2", + "DBVDD3", + "DCVDD", + "AVDD1", + "AVDD2", + "CPVDD", + "SPKVDD1", + "SPKVDD2", +}; + #ifdef CONFIG_PM static int wm8994_device_suspend(struct device *dev) { @@ -239,7 +251,7 @@ static int wm8994_device_suspend(struct device *dev) if (ret < 0) dev_err(dev, "Failed to save LDO registers: %d\n", ret); - ret = regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies), + ret = regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(dev, "Failed to disable supplies: %d\n", ret); @@ -254,7 +266,7 @@ static int wm8994_device_resume(struct device *dev) struct wm8994 *wm8994 = dev_get_drvdata(dev); int ret; - ret = regulator_bulk_enable(ARRAY_SIZE(wm8994_main_supplies), + ret = regulator_bulk_enable(wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(dev, "Failed to enable supplies: %d\n", ret); @@ -305,9 +317,10 @@ static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo) /* * Instantiate the generic non-control parts of the device. */ -static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq) +static int wm8994_device_init(struct wm8994 *wm8994, int irq) { struct wm8994_pdata *pdata = wm8994->dev->platform_data; + const char *devname; int ret, i; mutex_init(&wm8994->io_lock); @@ -323,25 +336,48 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq) goto err; } + switch (wm8994->type) { + case WM8994: + wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies); + break; + case WM8958: + wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies); + break; + default: + BUG(); + return -EINVAL; + } + wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) * - ARRAY_SIZE(wm8994_main_supplies), + wm8994->num_supplies, GFP_KERNEL); if (!wm8994->supplies) { ret = -ENOMEM; goto err; } - for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++) - wm8994->supplies[i].supply = wm8994_main_supplies[i]; - - ret = regulator_bulk_get(wm8994->dev, ARRAY_SIZE(wm8994_main_supplies), + switch (wm8994->type) { + case WM8994: + for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++) + wm8994->supplies[i].supply = wm8994_main_supplies[i]; + break; + case WM8958: + for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++) + wm8994->supplies[i].supply = wm8958_main_supplies[i]; + break; + default: + BUG(); + return -EINVAL; + } + + ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret); goto err_supplies; } - ret = regulator_bulk_enable(ARRAY_SIZE(wm8994_main_supplies), + ret = regulator_bulk_enable(wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret); @@ -353,7 +389,22 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq) dev_err(wm8994->dev, "Failed to read ID register\n"); goto err_enable; } - if (ret != 0x8994) { + switch (ret) { + case 0x8994: + devname = "WM8994"; + if (wm8994->type != WM8994) + dev_warn(wm8994->dev, "Device registered as type %d\n", + wm8994->type); + wm8994->type = WM8994; + break; + case 0x8958: + devname = "WM8958"; + if (wm8994->type != WM8958) + dev_warn(wm8994->dev, "Device registered as type %d\n", + wm8994->type); + wm8994->type = WM8958; + break; + default: dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n", ret); ret = -EINVAL; @@ -370,14 +421,16 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq) switch (ret) { case 0: case 1: - dev_warn(wm8994->dev, "revision %c not fully supported\n", - 'A' + ret); + if (wm8994->type == WM8994) + dev_warn(wm8994->dev, + "revision %c not fully supported\n", + 'A' + ret); break; default: - dev_info(wm8994->dev, "revision %c\n", 'A' + ret); break; } + dev_info(wm8994->dev, "%s revision %c\n", devname, 'A' + ret); if (pdata) { wm8994->irq_base = pdata->irq_base; @@ -423,10 +476,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq) err_irq: wm8994_irq_exit(wm8994); err_enable: - regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies), + regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); err_get: - regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies); + regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); err_supplies: kfree(wm8994->supplies); err: @@ -439,9 +492,9 @@ static void wm8994_device_exit(struct wm8994 *wm8994) { mfd_remove_devices(wm8994->dev); wm8994_irq_exit(wm8994); - regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies), + regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); - regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies); + regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); kfree(wm8994->supplies); kfree(wm8994); } @@ -506,8 +559,9 @@ static int wm8994_i2c_probe(struct i2c_client *i2c, wm8994->read_dev = wm8994_i2c_read_device; wm8994->write_dev = wm8994_i2c_write_device; wm8994->irq = i2c->irq; + wm8994->type = id->driver_data; - return wm8994_device_init(wm8994, id->driver_data, i2c->irq); + return wm8994_device_init(wm8994, i2c->irq); } static int wm8994_i2c_remove(struct i2c_client *i2c) @@ -535,7 +589,8 @@ static int wm8994_i2c_resume(struct i2c_client *i2c) #endif static const struct i2c_device_id wm8994_i2c_id[] = { - { "wm8994", 0 }, + { "wm8994", WM8994 }, + { "wm8958", WM8958 }, { } }; MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id); diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h index de79bae..3fd3684 100644 --- a/include/linux/mfd/wm8994/core.h +++ b/include/linux/mfd/wm8994/core.h @@ -17,6 +17,11 @@ #include <linux/interrupt.h> +enum wm8994_type { + WM8994 = 0, + WM8958 = 1, +}; + struct regulator_dev; struct regulator_bulk_data; @@ -48,6 +53,8 @@ struct wm8994 { struct mutex io_lock; struct mutex irq_lock; + enum wm8994_type type; + struct device *dev; int (*read_dev)(struct wm8994 *wm8994, unsigned short reg, int bytes, void *dest); @@ -68,6 +75,7 @@ struct wm8994 { u16 gpio_regs[WM8994_NUM_GPIO_REGS]; struct regulator_dev *dbvdd; + int num_supplies; struct regulator_bulk_data *supplies; }; -- 1.7.1

2 2

[alsa-devel] ASoC updates for 2.6.37
by Mark Brown 02 Nov '10

02 Nov '10

The following changes since commit 89e1e66d6be8a520cdcd26043cda2cc870a34015: ALSA: usb-audio: automatically detect feedback format (2010-10-27 09:17:41 +0200) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.37 All minor and localised fixes with the exception of the patches from Jarkko which improve build test coverage. Jarkko Nikula (2): ASoC: Fix SND_SOC_ALL_CODECS typo for jz4740 ASoC: Include cx20442 to SND_SOC_ALL_CODECS Joe Perches (1): ASoC: Update WARN uses in wm_hubs Mark Brown (2): ASoC: Check return value of struct_strtoul() in pmdown_time_set() ASoC: Remove volatility from WM8900 POWER1 register sound/soc/codecs/Kconfig | 3 ++- sound/soc/codecs/wm8900.c | 6 ------ sound/soc/codecs/wm_hubs.c | 2 +- sound/soc/soc-core.c | 5 ++++- 4 files changed, 7 insertions(+), 9 deletions(-)

2 1

Re: [alsa-devel] [PATCH] AudioScience HPI driver: Unsafe memory management when allocating control cache
by Eliot Blennerhassett 02 Nov '10

02 Nov '10

On 30/10/10 08:35, Jesper Juhl wrote: > I noticed that sound/pci/asihpi/hpicmn.c::hpi_alloc_control_cache() does > not check the return value from kmalloc(), which may fail. > If kmalloc() fails we'll dereference a null pointer and things will go bad > fast. > There are two memory allocations in that function and there's also the > problem that the first may succeed and the second may fail and nothing is > done about that either which will also go wrong down the line. Thanks Jesper, your changes look fine. Acked-by: Eliot Blennerhassett <linux(a)audioscience.com>

2 1

[alsa-devel] iec958 and 24-bit audio
by pl bossart 01 Nov '10

01 Nov '10

When I try playing 24-bit audio files on my SPDIF output, I get this [alsa-lib]$ aplay -Diec958 file24bits.wav aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE Is there an built-in assumption that the iec958 device can only take as input what the slave hardware device supports? The IEC subframes can convey 24 bit audio, and it's possible to insert the 24 bits starting from bit 4 when adding the preambles and status bits. What am I missing? Thanks, -Poerre

2 3

[alsa-devel] [PATCH 00/39] Cleanup WARN #defines
by Joe Perches 01 Nov '10

01 Nov '10

WARN uses sometimes use KERN_<level> but mostly don't have any prefix. Change the WARN macros and the warn_slowpath function to preface KERN_WARNING and remove all the KERN_<level> uses from WARN sites. Neatening clean up of include/asm-generic/bug.h Update WARN macros Add KERN_WARNING to WARN output Remove any KERN_<level> from WARN uses Coalesce formats Align WARN arguments Add some missing newlines to WARN uses Add some missing first test argument (1, fmt, args) to WARN uses Joe Perches (39): include/asm-generic/bug.h: Update WARN macros arch/alpha: Update WARN uses arch/arm: Update WARN uses arch/powerpc: Update WARN uses arch/x86: Update WARN uses drivers/acpi: Update WARN uses drivers/base: Update WARN uses drivers/block: Update WARN uses drivers/cpuidle: Update WARN uses drivers/firewire: Update WARN uses drivers/firmware: Update WARN uses drivers/gpio: Update WARN uses drivers/gpu/drm: Update WARN uses drivers/media/video: Update WARN uses drivers/mfd: Update WARN uses drivers/net/can: Update WARN uses drivers/net/usb: Update WARN uses drivers/net/wireless/iwlwifi: Update WARN uses drivers/regulator: Update WARN uses drivers/scsi/fcoe: Update WARN uses drivers/staging: Update WARN uses drivers/usb/musb: Update WARN uses drivers/video/omap2/dss: Update WARN uses fs/nfsd: Update WARN uses fs/notify/inotify: Update WARN uses fs/sysfs: Update WARN uses fs/proc: Update WARN uses fs: Update WARN uses include/linux/device.h: Update WARN uses kernel/irq: Update WARN uses kernel/panic.c: Update warn_slowpath to use %pV kernel: Update WARN uses lib: Update WARN uses mm: Update WARN uses net/core/dev.c: Update WARN uses net/ipv4/tcp.c: Update WARN uses net/mac80211: Update WARN uses net/rfkill/input.c: Update WARN uses sound/soc/codecs/wm_hubs.c: Update WARN uses arch/alpha/kernel/pci-sysfs.c | 14 ++-- arch/arm/mach-davinci/clock.c | 4 +- arch/arm/mach-davinci/da830.c | 2 +- arch/arm/mach-davinci/da850.c | 12 ++-- arch/arm/mach-omap2/clkt_clksel.c | 12 ++-- arch/arm/mach-omap2/clock.c | 16 ++-- arch/arm/mach-omap2/devices.c | 4 +- arch/arm/mach-omap2/omap_hwmod.c | 47 +++++++----- arch/arm/mach-omap2/pm34xx.c | 7 +- arch/arm/mach-omap2/serial.c | 2 +- arch/arm/mach-omap2/timer-gp.c | 3 +- arch/arm/mach-tegra/clock.c | 3 +- arch/arm/mach-tegra/timer.c | 2 +- arch/arm/mach-u300/padmux.c | 14 +--- arch/arm/plat-omap/omap-pm-noop.c | 10 ++-- arch/powerpc/kernel/hw_breakpoint.c | 4 +- arch/x86/kernel/acpi/boot.c | 2 +- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/apic/es7000_32.c | 2 +- arch/x86/kernel/cpu/perf_event.c | 4 +- arch/x86/kernel/pci-calgary_64.c | 4 +- arch/x86/kernel/tsc_sync.c | 4 +- arch/x86/kernel/xsave.c | 2 +- arch/x86/mm/ioremap.c | 5 +- arch/x86/mm/pageattr-test.c | 2 +- arch/x86/mm/pageattr.c | 5 +- arch/x86/platform/sfi/sfi.c | 4 +- drivers/acpi/ec.c | 4 +- drivers/base/class.c | 4 +- drivers/base/core.c | 5 +- drivers/base/memory.c | 4 +- drivers/base/sys.c | 10 +-- drivers/block/floppy.c | 2 +- drivers/cpuidle/driver.c | 2 +- drivers/firewire/core-transaction.c | 6 +- drivers/firmware/dmi_scan.c | 2 +- drivers/gpio/gpiolib.c | 4 +- drivers/gpio/it8761e_gpio.c | 2 +- drivers/gpu/drm/drm_crtc_helper.c | 2 +- drivers/gpu/drm/i915/i915_gem.c | 3 +- drivers/gpu/drm/radeon/evergreen.c | 2 +- drivers/gpu/drm/radeon/r100.c | 4 +- drivers/gpu/drm/radeon/r300.c | 2 +- drivers/gpu/drm/radeon/r600.c | 4 +- drivers/gpu/drm/radeon/radeon_fence.c | 3 +- drivers/gpu/drm/radeon/radeon_ttm.c | 3 +- drivers/gpu/drm/radeon/rs400.c | 2 +- drivers/gpu/drm/radeon/rs600.c | 4 +- drivers/media/video/s5p-fimc/fimc-core.c | 2 +- drivers/media/video/sr030pc30.c | 2 +- drivers/mfd/ezx-pcap.c | 5 +- drivers/net/can/mscan/mscan.c | 2 +- drivers/net/usb/ipheth.c | 2 +- drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 3 +- drivers/net/wireless/iwlwifi/iwl-agn-sta.c | 6 +- drivers/net/wireless/iwlwifi/iwl-tx.c | 6 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- drivers/regulator/core.c | 3 +- drivers/scsi/fcoe/libfcoe.c | 2 +- drivers/staging/memrar/memrar_allocator.c | 2 +- drivers/staging/solo6x10/solo6010-v4l2-enc.c | 2 +- drivers/usb/musb/musb_host.c | 6 +- drivers/video/omap2/dss/core.c | 3 +- fs/bio.c | 2 +- fs/buffer.c | 2 +- fs/nfsd/nfs4state.c | 3 +- fs/notify/inotify/inotify_fsnotify.c | 4 +- fs/proc/generic.c | 9 +-- fs/super.c | 5 +- fs/sysfs/dir.c | 3 +- fs/sysfs/file.c | 4 +- fs/sysfs/group.c | 4 +- fs/sysfs/symlink.c | 10 +-- include/asm-generic/bug.h | 101 ++++++++++++++++---------- include/linux/device.h | 2 +- kernel/irq/chip.c | 2 +- kernel/irq/manage.c | 2 +- kernel/notifier.c | 2 +- kernel/panic.c | 40 +++++------ kernel/pm_qos_params.c | 6 +- lib/debugobjects.c | 21 +++--- lib/iomap.c | 2 +- lib/kobject.c | 9 +-- lib/kobject_uevent.c | 4 +- lib/list_debug.c | 24 +++---- lib/plist.c | 12 ++-- mm/percpu.c | 4 +- mm/vmalloc.c | 5 +- net/core/dev.c | 3 +- net/ipv4/tcp.c | 16 ++--- net/mac80211/agg-tx.c | 5 +- net/mac80211/iface.c | 4 +- net/mac80211/mlme.c | 2 +- net/mac80211/rx.c | 4 +- net/mac80211/tx.c | 4 +- net/mac80211/util.c | 4 +- net/mac80211/work.c | 4 +- net/rfkill/input.c | 5 +- sound/soc/codecs/wm_hubs.c | 2 +- 99 files changed, 319 insertions(+), 330 deletions(-) -- 1.7.3.1.g432b3.dirty

2 2

Re: [alsa-devel] [PATCH] cs46xx memory management fixes for cs46xx_dsp_spos_create() - make sure we free and don't do pointless work.
by Ondrej Zary 01 Nov '10

01 Nov '10

On Saturday 30 October 2010 00:18:57 Benny Sjöstrand wrote: > Hello again! > > Just doing a reply-all. > It's has been many years since I did anything to the cs46xx driver, so > I'm wondering > if there's anyone out there still using a cs46xx sound card? > I think the changes look's correct, but I can't test it, I do not have a > cs46xx hardware anymore. Sure, there are many of these cards "out there". I just got a "new" Terratec DMX Xfire 1024 (CS4624). I'll test the patch. > > /Benny > > Jesper Juhl wrote: > > Hi, > > > > When reading through sound/pci/cs46xx/dsp_spos.c I noticed a couple of > > things in cs46xx_dsp_spos_create(). > > > > It seems to me that we don't always free the various memory buffers we > > allocate and we also do some work (structure member assignment) early, > > that is completely pointless if some of the memory allocations fail and > > we end up just aborting the whole thing. > > > > I don't have hardware to test, so the patch below is compile tested only, > > but it makes the following changes: > > > > - Make sure we always free all allocated memory on failures. > > - Don't do pointless work assigning to structure members before we know > > all memory allocations, that may abort progress, have completed > > successfully. > > - Remove some trailing whitespace. > > > > If it looks ok, please merge, otherwise I'd be interested in knowing > > what's wrong so I can improve it. > > > > > > Signed-off-by: Jesper Juhl <jj(a)chaosbits.net> > > --- > > dsp_spos.c | 33 +++++++++++---------------------- > > 1 file changed, 11 insertions(+), 22 deletions(-) > > > > diff --git a/sound/pci/cs46xx/dsp_spos.c b/sound/pci/cs46xx/dsp_spos.c > > index 3e5ca8f..e377287 100644 > > --- a/sound/pci/cs46xx/dsp_spos.c > > +++ b/sound/pci/cs46xx/dsp_spos.c > > @@ -225,39 +225,25 @@ struct dsp_spos_instance *cs46xx_dsp_spos_create > > (struct snd_cs46xx * chip) { > > struct dsp_spos_instance * ins = kzalloc(sizeof(struct > > dsp_spos_instance), GFP_KERNEL); > > > > - if (ins == NULL) > > + if (ins == NULL) > > return NULL; > > > > /* better to use vmalloc for this big table */ > > - ins->symbol_table.nsymbols = 0; > > ins->symbol_table.symbols = vmalloc(sizeof(struct dsp_symbol_entry) * > > DSP_MAX_SYMBOLS); > > - ins->symbol_table.highest_frag_index = 0; > > - > > - if (ins->symbol_table.symbols == NULL) { > > + ins->code.data = kmalloc(DSP_CODE_BYTE_SIZE, GFP_KERNEL); > > + ins->modules = kmalloc(sizeof(struct dsp_module_desc) * > > DSP_MAX_MODULES, GFP_KERNEL); + if (!ins->symbol_table.symbols || > > !ins->code.data || !ins->modules) { cs46xx_dsp_spos_destroy(chip); > > goto error; > > } > > - > > + ins->symbol_table.nsymbols = 0; > > + ins->symbol_table.highest_frag_index = 0; > > ins->code.offset = 0; > > ins->code.size = 0; > > - ins->code.data = kmalloc(DSP_CODE_BYTE_SIZE, GFP_KERNEL); > > - > > - if (ins->code.data == NULL) { > > - cs46xx_dsp_spos_destroy(chip); > > - goto error; > > - } > > - > > ins->nscb = 0; > > ins->ntask = 0; > > - > > ins->nmodules = 0; > > - ins->modules = kmalloc(sizeof(struct dsp_module_desc) * > > DSP_MAX_MODULES, GFP_KERNEL); - > > - if (ins->modules == NULL) { > > - cs46xx_dsp_spos_destroy(chip); > > - goto error; > > - } > > > > /* default SPDIF input sample rate > > to 48000 khz */ > > @@ -271,8 +257,8 @@ struct dsp_spos_instance *cs46xx_dsp_spos_create > > (struct snd_cs46xx * chip) > > > > /* set left and right validity bits and > > default channel status */ > > - ins->spdif_csuv_default = > > - ins->spdif_csuv_stream = > > + ins->spdif_csuv_default = > > + ins->spdif_csuv_stream = > > /* byte 0 */ ((unsigned int)_wrap_all_bits( > > (SNDRV_PCM_DEFAULT_CON_SPDIF & 0xff)) << 24) | /* byte 1 */ > > ((unsigned int)_wrap_all_bits( ((SNDRV_PCM_DEFAULT_CON_SPDIF >> 8) & > > 0xff)) << 16) | /* byte 3 */ (unsigned int)_wrap_all_bits( > > (SNDRV_PCM_DEFAULT_CON_SPDIF >> 24) & 0xff) | @@ -281,6 +267,9 @@ struct > > dsp_spos_instance *cs46xx_dsp_spos_create (struct snd_cs46xx * chip) > > return ins; > > > > error: > > + kfree(ins->modules); > > + kfree(ins->code.data); > > + vfree(ins->symbol_table.symbols); > > kfree(ins); > > return NULL; > > } > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo(a)vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Ondrej Zary

3 4