- Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
by Ajit Kumar Pandey 06 Jan '22

06 Jan '22

RT1019 components was initially registered with i2c1 and i2c2 but now changed to i2c0 and i2c1 in most of our AMD platforms. Change default rt1019 components to 10EC1019:00 and 10EC1019:01 which is aligned with most of AMD machines. Any exception to rt1019 device ids in near future board design can be handled using dmi based quirk for that machine. Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey(a)amd.com> --- sound/soc/amd/acp/acp-mach-common.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/amd/acp/acp-mach-common.c b/sound/soc/amd/acp/acp-mach-common.c index 03d8d1af14b3..c9caade5cb74 100644 --- a/sound/soc/amd/acp/acp-mach-common.c +++ b/sound/soc/amd/acp/acp-mach-common.c @@ -293,8 +293,8 @@ static const struct snd_soc_ops acp_card_rt5682s_ops = { /* Declare RT1019 codec components */ SND_SOC_DAILINK_DEF(rt1019, - DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC1019:01", "rt1019-aif"), - COMP_CODEC("i2c-10EC1019:02", "rt1019-aif"))); + DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC1019:00", "rt1019-aif"), + COMP_CODEC("i2c-10EC1019:01", "rt1019-aif"))); static const struct snd_soc_dapm_route rt1019_map_lr[] = { { "Left Spk", NULL, "Left SPO" }, @@ -303,11 +303,11 @@ static const struct snd_soc_dapm_route rt1019_map_lr[] = { static struct snd_soc_codec_conf rt1019_conf[] = { { - .dlc = COMP_CODEC_CONF("i2c-10EC1019:01"), + .dlc = COMP_CODEC_CONF("i2c-10EC1019:00"), .name_prefix = "Left", }, { - .dlc = COMP_CODEC_CONF("i2c-10EC1019:02"), + .dlc = COMP_CODEC_CONF("i2c-10EC1019:01"), .name_prefix = "Right", }, }; -- 2.25.1

2 1

[PATCH 0/3] ASoC: imx-card: several improvement and fixes
by Shengjiu Wang 06 Jan '22

06 Jan '22

Several improvement and fixes for AK codecs supported on i.MX platfroms Shengjiu Wang (3): ASoC: imx-card: Need special setting for ak4497 on i.MX8MQ ASoC: imx-card: Fix mclk calculation issue for akcodec ASoC: imx-card: improve the sound quality for low rate sound/soc/fsl/imx-card.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) -- 2.17.1

2 5

[PATCH] ASoC: fsl_asrc: refine the check of available clock divider
by Shengjiu Wang 06 Jan '22

06 Jan '22

According to RM, the clock divider range is from 1 to 8, clock prescaling ratio may be any power of 2 from 1 to 128. So the supported divider is not all the value between 1 and 1024, just limited value in that range. Create table for the supported divder and add function to check the clock divider is available by comparing with the table. Fixes: d0250cf4f2ab ("ASoC: fsl_asrc: Add an option to select internal ratio mode") Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_asrc.c | 69 +++++++++++++++++++++++++++++++++------- 1 file changed, 58 insertions(+), 11 deletions(-) diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index 24b41881a68f..d7d1536a4f37 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -19,6 +19,7 @@ #include "fsl_asrc.h" #define IDEAL_RATIO_DECIMAL_DEPTH 26 +#define DIVIDER_NUM 64 #define pair_err(fmt, ...) \ dev_err(&asrc->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__) @@ -101,6 +102,55 @@ static unsigned char clk_map_imx8qxp[2][ASRC_CLK_MAP_LEN] = { }, }; +/* + * According to RM, the divider range is 1 ~ 8, + * prescaler is power of 2 from 1 ~ 128. + */ +static int asrc_clk_divider[DIVIDER_NUM] = { + 1, 2, 4, 8, 16, 32, 64, 128, /* divider = 1 */ + 2, 4, 8, 16, 32, 64, 128, 256, /* divider = 2 */ + 3, 6, 12, 24, 48, 96, 192, 384, /* divider = 3 */ + 4, 8, 16, 32, 64, 128, 256, 512, /* divider = 4 */ + 5, 10, 20, 40, 80, 160, 320, 640, /* divider = 5 */ + 6, 12, 24, 48, 96, 192, 384, 768, /* divider = 6 */ + 7, 14, 28, 56, 112, 224, 448, 896, /* divider = 7 */ + 8, 16, 32, 64, 128, 256, 512, 1024, /* divider = 8 */ +}; + +/* + * Check if the divider is available for internal ratio mode + */ +static bool fsl_asrc_divider_avail(int clk_rate, int rate, int *div) +{ + u32 rem, i; + u64 n; + + if (div) + *div = 0; + + if (clk_rate == 0 || rate == 0) + return false; + + n = clk_rate; + rem = do_div(n, rate); + + if (div) + *div = n; + + if (rem != 0) + return false; + + for (i = 0; i < DIVIDER_NUM; i++) { + if (n == asrc_clk_divider[i]) + break; + } + + if (i == DIVIDER_NUM) + return false; + + return true; +} + /** * fsl_asrc_sel_proc - Select the pre-processing and post-processing options * @inrate: input sample rate @@ -330,12 +380,12 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate) enum asrc_word_width input_word_width; enum asrc_word_width output_word_width; u32 inrate, outrate, indiv, outdiv; - u32 clk_index[2], div[2], rem[2]; + u32 clk_index[2], div[2]; u64 clk_rate; int in, out, channels; int pre_proc, post_proc; struct clk *clk; - bool ideal; + bool ideal, div_avail; if (!config) { pair_err("invalid pair config\n"); @@ -415,8 +465,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate) clk = asrc_priv->asrck_clk[clk_index[ideal ? OUT : IN]]; clk_rate = clk_get_rate(clk); - rem[IN] = do_div(clk_rate, inrate); - div[IN] = (u32)clk_rate; + div_avail = fsl_asrc_divider_avail(clk_rate, inrate, &div[IN]); /* * The divider range is [1, 1024], defined by the hardware. For non- @@ -425,7 +474,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate) * only result in different converting speeds. So remainder does not * matter, as long as we keep the divider within its valid range. */ - if (div[IN] == 0 || (!ideal && (div[IN] > 1024 || rem[IN] != 0))) { + if (div[IN] == 0 || (!ideal && !div_avail)) { pair_err("failed to support input sample rate %dHz by asrck_%x\n", inrate, clk_index[ideal ? OUT : IN]); return -EINVAL; @@ -436,13 +485,12 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate) clk = asrc_priv->asrck_clk[clk_index[OUT]]; clk_rate = clk_get_rate(clk); if (ideal && use_ideal_rate) - rem[OUT] = do_div(clk_rate, IDEAL_RATIO_RATE); + div_avail = fsl_asrc_divider_avail(clk_rate, IDEAL_RATIO_RATE, &div[OUT]); else - rem[OUT] = do_div(clk_rate, outrate); - div[OUT] = clk_rate; + div_avail = fsl_asrc_divider_avail(clk_rate, outrate, &div[OUT]); /* Output divider has the same limitation as the input one */ - if (div[OUT] == 0 || (!ideal && (div[OUT] > 1024 || rem[OUT] != 0))) { + if (div[OUT] == 0 || (!ideal && !div_avail)) { pair_err("failed to support output sample rate %dHz by asrck_%x\n", outrate, clk_index[OUT]); return -EINVAL; @@ -621,8 +669,7 @@ static void fsl_asrc_select_clk(struct fsl_asrc_priv *asrc_priv, clk_index = asrc_priv->clk_map[j][i]; clk_rate = clk_get_rate(asrc_priv->asrck_clk[clk_index]); /* Only match a perfect clock source with no remainder */ - if (clk_rate != 0 && (clk_rate / rate[j]) <= 1024 && - (clk_rate % rate[j]) == 0) + if (fsl_asrc_divider_avail(clk_rate, rate[j], NULL)) break; } -- 2.17.1

2 1

[PATCH v2 0/6] ASoC: rt5640: 1 Bugfix + Add support for external GPIO jack-detect
by Hans de Goede 06 Jan '22

06 Jan '22

Hi All, Here is v2 of my series to fix jack-detect not working on some x86 Bay Trail devices. Now rebased on top of the latest broonie/sound.git/for-next. New this version is a bug-fix for an issue which I noticed in the current broonie/sound.git/for-next (patch 1 of the series). Since this fixes a NULL-ptr deref in current for-next patch 1 should be included into a pull-req for 5.17. The rest of the series can go to either 5.17 or 5.18. Regards, Hans Hans de Goede (6): ASoC: rt5640: Fix possible NULL pointer deref on resume ASoC: rt5640: Change jack_work to a delayed_work ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ ASoC: rt5640: Add support for boards with an external jack-detect GPIO ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect sound/soc/codecs/rt5640.c | 71 +++++++++++++++++----- sound/soc/codecs/rt5640.h | 11 +++- sound/soc/intel/boards/bytcr_rt5640.c | 86 +++++++++++++++++++++++++-- 3 files changed, 146 insertions(+), 22 deletions(-) -- 2.33.1

2 7

[PATCH] ASoC: topology: Fix typo
by Qinghua Jin 06 Jan '22

06 Jan '22

change 'postion' to 'position' Signed-off-by: Qinghua Jin <qhjin.dev(a)gmail.com> --- sound/soc/soc-topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index f5b9e66ac3b8..2630df024dff 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -56,7 +56,7 @@ struct soc_tplg { const struct firmware *fw; /* runtime FW parsing */ - const u8 *pos; /* read postion */ + const u8 *pos; /* read position */ const u8 *hdr_pos; /* header position */ unsigned int pass; /* pass number */ -- 2.30.2

2 1

[PATCH 1/5] ASoC: rt5640: Change jack_work to a delayed_work
by Hans de Goede 06 Jan '22

06 Jan '22

Change jack_work from a struct work_struct to a struct delayed_work, this is a preparation patch for adding support for boards where an external GPIO is used for jack-detect, rather then one of the JD pins of the codec. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- sound/soc/codecs/rt5640.c | 12 ++++++------ sound/soc/codecs/rt5640.h | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index d01fe73ab9c8..36c00ad17182 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -2297,7 +2297,7 @@ EXPORT_SYMBOL_GPL(rt5640_detect_headset); static void rt5640_jack_work(struct work_struct *work) { struct rt5640_priv *rt5640 = - container_of(work, struct rt5640_priv, jack_work); + container_of(work, struct rt5640_priv, jack_work.work); struct snd_soc_component *component = rt5640->component; int status; @@ -2348,7 +2348,7 @@ static void rt5640_jack_work(struct work_struct *work) * disabled the OVCD IRQ, the IRQ pin will stay high and as * we react to edges, we miss the unplug event -> recheck. */ - queue_work(system_long_wq, &rt5640->jack_work); + queue_delayed_work(system_long_wq, &rt5640->jack_work, 0); } } @@ -2357,7 +2357,7 @@ static irqreturn_t rt5640_irq(int irq, void *data) struct rt5640_priv *rt5640 = data; if (rt5640->jack) - queue_work(system_long_wq, &rt5640->jack_work); + queue_delayed_work(system_long_wq, &rt5640->jack_work, 0); return IRQ_HANDLED; } @@ -2366,7 +2366,7 @@ static void rt5640_cancel_work(void *data) { struct rt5640_priv *rt5640 = data; - cancel_work_sync(&rt5640->jack_work); + cancel_delayed_work_sync(&rt5640->jack_work); cancel_delayed_work_sync(&rt5640->bp_work); } @@ -2475,7 +2475,7 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component, } /* sync initial jack state */ - queue_work(system_long_wq, &rt5640->jack_work); + queue_delayed_work(system_long_wq, &rt5640->jack_work, 0); } static int rt5640_set_jack(struct snd_soc_component *component, @@ -2856,7 +2856,7 @@ static int rt5640_i2c_probe(struct i2c_client *i2c, rt5640->hp_mute = true; rt5640->irq = i2c->irq; INIT_DELAYED_WORK(&rt5640->bp_work, rt5640_button_press_work); - INIT_WORK(&rt5640->jack_work, rt5640_jack_work); + INIT_DELAYED_WORK(&rt5640->jack_work, rt5640_jack_work); /* Make sure work is stopped on probe-error / remove */ ret = devm_add_action_or_reset(&i2c->dev, rt5640_cancel_work, rt5640); diff --git a/sound/soc/codecs/rt5640.h b/sound/soc/codecs/rt5640.h index 2c28f83e338a..7ab930def8dd 100644 --- a/sound/soc/codecs/rt5640.h +++ b/sound/soc/codecs/rt5640.h @@ -2145,7 +2145,7 @@ struct rt5640_priv { int release_count; int poll_count; struct delayed_work bp_work; - struct work_struct jack_work; + struct delayed_work jack_work; struct snd_soc_jack *jack; unsigned int jd_src; bool jd_inverted; -- 2.33.1

3 10

[PATCH 2/2] ALSA: virmidi: Remove duplicated code
by Stefan Sauer 06 Jan '22

06 Jan '22

seq_virmidi.c: snd_virmidi_new() is already setting seq_mode to SNDRV_VIRMIDI_SEQ_DISPATCH. Signed-off-by: Stefan Sauer <st_kost(a)gmx.de> --- sound/drivers/virmidi.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/sound/drivers/virmidi.c b/sound/drivers/virmidi.c index 7f7eed6faaae..58012de90c38 100644 --- a/sound/drivers/virmidi.c +++ b/sound/drivers/virmidi.c @@ -90,15 +90,12 @@ static int snd_virmidi_probe(struct platform_device *devptr) } for (idx = 0; idx < midi_devs[dev]; idx++) { struct snd_rawmidi *rmidi; - struct snd_virmidi_dev *rdev; err = snd_virmidi_new(card, idx, &rmidi); if (err < 0) return err; - rdev = rmidi->private_data; vmidi->midi[idx] = rmidi; strcpy(rmidi->name, "Virtual Raw MIDI"); - rdev->seq_mode = SNDRV_VIRMIDI_SEQ_DISPATCH; } strcpy(card->driver, "VirMIDI"); -- 2.34.1

2 1

[PATCH 1/2] ALSA: seq: virmidi: Add a drain operation
by Stefan Sauer 06 Jan '22

06 Jan '22

If a driver does not supply a drain operation for outputs, a default code path will execute msleep(50). Especially for a virtual midi device this severely limmits the throughput. This implementation for the virtual midi driver simply flushes the output workqueue. Signed-off-by: Stefan Sauer <st_kost(a)gmx.de> --- sound/core/seq/seq_virmidi.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/core/seq/seq_virmidi.c b/sound/core/seq/seq_virmidi.c index 4abc38c70cae..f5cae49500c8 100644 --- a/sound/core/seq/seq_virmidi.c +++ b/sound/core/seq/seq_virmidi.c @@ -262,6 +262,16 @@ static int snd_virmidi_output_close(struct snd_rawmidi_substream *substream) return 0; } +/* + * drain output work queue + */ +static void snd_virmidi_output_drain(struct snd_rawmidi_substream *substream) +{ + struct snd_virmidi *vmidi = substream->runtime->private_data; + + flush_work(&vmidi->output_work); +} + /* * subscribe callback - allow output to rawmidi device */ @@ -336,6 +346,7 @@ static const struct snd_rawmidi_ops snd_virmidi_output_ops = { .open = snd_virmidi_output_open, .close = snd_virmidi_output_close, .trigger = snd_virmidi_output_trigger, + .drain = snd_virmidi_output_drain, }; /* -- 2.34.1

2 1

[PATCH v2] ALSA: intel_hdmi: Check for error num after setting mask
by Jiasheng Jiang 06 Jan '22

06 Jan '22

To maintain the consistency of the code, it should be better to add the sanity check after calling dma_set_mask_and_coherent(), like tegra_pcm_dma_allocate() in `sound/soc/tegra/tegra_pcm.c`. Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> --- Changelog v1 -> v2 * Change 1. Remove the fixes tag and change the message. --- sound/x86/intel_hdmi_audio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index 33b12aa67cf5..6caea517f07f 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -1770,7 +1770,9 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) card_ctx->irq = irq; /* only 32bit addressable */ - dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + goto err; init_channel_allocations(); -- 2.25.1

2 1

Re: Re: [PATCH] ALSA: intel_hdmi: Check for error num after setting mask
by Jiasheng Jiang 06 Jan '22

06 Jan '22

On Thu, Jan 06, 2022 at 04:18:01PM +0800, Takashi Iwai wrote: > Well, 32bit DMA mask practically never fails on x86 (and other > architectures, IIRC). It's fine to add a sanity check, but it's > better to be mentioned that it never fails. Actually, I have already found many place check the 32bit DMA mask. For example: snd_ad1889_create() in `sound/pci/ad1889.c`, snd_vortex_create() in `sound/pci/au88x0/au88x0.c` tegra_pcm_dma_allocate() in `sound/soc/tegra/tegra_pcm.c`. Therefore, I think there must be some reason that 32bit may fail. So, to make the system more robust, it should be better to add the sanity check. Sincerely thanks, Jiang

2 1