- Alsa-devel - mailman.alsa-project.org

`alsatplg` compile error `undefined source widget/stream` and `undefined sink widget/stream`
by GitHub issues - opened 03 Feb '22

03 Feb '22

alsa-project/alsa-utils issue #142 was opened from LazyGeniusMan: Hi, I'm trying to do enable HDA+DMIC in my Kabylake R laptop using a guide[^1]. It's said to compile hda-dsp in [alsa-topology-conf](https://github.com/alsa-project/alsa-topology-conf), but I got this error: ``` [lazygeniusman@archlinux hda-dsp]$ alsatplg -c skl_hda_dsp_generic-tplg.conf -o skl_hda_dsp_generic-tplg.bin ALSA lib dapm.c:247:(tplg_build_routes) undefined source widget/stream 'hda-dsp-analog-playback' ALSA lib dapm.c:247:(tplg_build_routes) undefined source widget/stream 'hda-dsp-digital-playback' ALSA lib dapm.c:247:(tplg_build_routes) undefined source widget/stream 'hda-dsp-alt-analog-playback' ALSA lib dapm.c:225:(tplg_build_routes) undefined sink widget/stream 'hda-dsp-audio-analog-capture' ALSA lib dapm.c:225:(tplg_build_routes) undefined sink widget/stream 'hda-dsp-audio-digital-capture' ALSA lib dapm.c:225:(tplg_build_routes) undefined sink widget/stream 'hda-dsp-audio-alt-analog-capture' ALSA lib dapm.c:247:(tplg_build_routes) undefined source widget/stream 'HDMI1 Playback' ALSA lib dapm.c:247:(tplg_build_routes) undefined source widget/stream 'HDMI2 Playback' ALSA lib dapm.c:247:(tplg_build_routes) undefined source widget/stream 'HDMI3 Playback' ALSA lib dapm.c:225:(tplg_build_routes) undefined sink widget/stream 'DMIC-Capture' Unable to open output file 'skl_hda_dsp_generic-tplg.bin.new': Unknown error -13 ``` it's also have same error when I run `make firmware` in the repo root dir Could someone help me solve it? [^1]: https://gist.github.com/crojewsk/4e6382bfb0dbfaaf60513174211f29cb#topology Issue URL : https://github.com/alsa-project/alsa-utils/issues/142 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[GIT PULL] Immutable branch with spi in i2c-multi-instantiate changes
by Hans de Goede 02 Feb '22

02 Feb '22

Hi Takashi, Rafael, As discussed here is a pull-req for an immutable branch with all the changes from the "[PATCH v6 0/9] Support Spi in i2c-multi-instantiate driver" series, including one ALSA change, in case you want to merge this to avoid conflicts. Regards, Hans The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07: Linux 5.17-rc1 (2022-01-23 10:12:53 +0200) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git tags/platform-drivers-x86-serial-multi-instantiate-1 for you to fetch changes up to d9c01c530cc5e3b6d5bdfeae12c3d0f33fae7498: ACPI / scan: Create platform device for CS35L41 (2022-02-02 18:12:41 +0100) ---------------------------------------------------------------- This branch contains 5.17-rc1 + the SPI tree's spi-acpi-helpers tag + the other patches from the "[PATCH v6 0/9] Support Spi in i2c-multi-instantiate driver" series. ---------------------------------------------------------------- Lucas Tanure (4): platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name platform/x86: serial-multi-instantiate: Reorganize I2C functions ALSA: hda/realtek: Add support for HP Laptops ACPI / scan: Create platform device for CS35L41 Stefan Binding (5): spi: Make spi_alloc_device and spi_add_device public again spi: Create helper API to lookup ACPI info for spi device spi: Support selection of the index of the ACPI Spi Resource before alloc spi: Add API to count spi acpi resources platform/x86: serial-multi-instantiate: Add SPI support MAINTAINERS | 4 +- drivers/acpi/scan.c | 16 +- drivers/platform/x86/Kconfig | 12 +- drivers/platform/x86/Makefile | 2 +- drivers/platform/x86/i2c-multi-instantiate.c | 174 ------------ drivers/platform/x86/serial-multi-instantiate.c | 348 ++++++++++++++++++++++++ drivers/spi/spi.c | 137 ++++++++-- include/linux/spi/spi.h | 20 ++ sound/pci/hda/patch_realtek.c | 43 ++- 9 files changed, 550 insertions(+), 206 deletions(-) delete mode 100644 drivers/platform/x86/i2c-multi-instantiate.c create mode 100644 drivers/platform/x86/serial-multi-instantiate.c

1 0

How to add support for A_LAW pcm format to ALSA Loop driver ?
by Christophe Leroy 02 Feb '22

02 Feb '22

Hi, I see that the ALSA Loop driver supports only the following formats: .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE | SNDRV_PCM_FMTBIT_FLOAT_LE | SNDRV_PCM_FMTBIT_FLOAT_BE), I'd like to have Loopback service with A_LAW format, I though it would just require to add SNDRV_PCM_FMTBIT_A_LAW to the format above as the Loopback driver just loops the samples. But it doesn't work, I still get only the following formats: ALSA ERROR hw_params: set (FORMAT) value = A_LAW : Invalid argument ACCESS: RW_INTERLEAVED FORMAT: S16_LE S16_BE S24_LE S32_LE S32_BE S24_3LE SUBFORMAT: STD SAMPLE_BITS: [16 32] FRAME_BITS: [16 1024] CHANNELS: [1 32] RATE: [8000 192000] PERIOD_TIME: (5 65536000] PERIOD_SIZE: [1 524288] PERIOD_BYTES: [2 67108864] PERIODS: [1 1024] BUFFER_TIME: (5 131072000] BUFFER_SIZE: [1 1048576] BUFFER_BYTES: [2 134217728] TICK_TIME: ALL ALSA lib pcm.c:8644:(snd_pcm_set_params) Sample format not available for CAPTURE: Invalid argument What am I missing, what needs to be added to the Loop driver to support A_LAW format ? Thanks for your help Christophe

1 0

[PATCH v6 0/9] Support Spi in i2c-multi-instantiate driver
by Stefan Binding 02 Feb '22

02 Feb '22

Add support for SPI bus in the i2c-multi-instantiate driver as upcoming laptops will need to multi instantiate SPI devices from a single device node, which has multiple SpiSerialBus entries at the ACPI table. With the new SPI support, i2c-multi-instantiate becomes bus-multi-instantiate and is moved to the ACPI folder. The intention is to support the SPI bus by re-using the current I2C multi instantiate, instead of creating a new SPI multi instantiate, to make it possible for peripherals that can be controlled by I2C or SPI to have the same HID at the ACPI table. The new driver (serial multi instantiate, smi) checks for the hard-coded bus type and returns -ENODEV in case of zero devices found for that bus. In the case of automatic bus detection, the driver will give preference to I2C. The expectation is for a device node in the ACPI table to have multiple I2cSerialBus only or multiple SpiSerialBus only, not a mix of both; and for the case where there are both entries in one device node, only the I2C ones would be probed. This new serial multi instantiate will be used in CS35L41 HDA new driver. Changes since V5: - comment, commit message and Kconfig description fixes - minor fixes in serial-multi-instantiate - use lowercase for SSIDs in patch_realtek.c Lucas Tanure (4): platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name platform/x86: serial-multi-instantiate: Reorganize I2C functions ALSA: hda/realtek: Add support for HP Laptops ACPI / scan: Create platform device for CS35L41 Stefan Binding (5): spi: Make spi_alloc_device and spi_add_device public again spi: Create helper API to lookup ACPI info for spi device spi: Support selection of the index of the ACPI Spi Resource before alloc spi: Add API to count spi acpi resources platform/x86: serial-multi-instantiate: Add SPI support MAINTAINERS | 4 +- drivers/acpi/scan.c | 16 +- drivers/platform/x86/Kconfig | 12 +- drivers/platform/x86/Makefile | 2 +- drivers/platform/x86/i2c-multi-instantiate.c | 174 --------- .../platform/x86/serial-multi-instantiate.c | 349 ++++++++++++++++++ drivers/spi/spi.c | 137 ++++++- include/linux/spi/spi.h | 20 + sound/pci/hda/patch_realtek.c | 43 ++- 9 files changed, 551 insertions(+), 206 deletions(-) delete mode 100644 drivers/platform/x86/i2c-multi-instantiate.c create mode 100644 drivers/platform/x86/serial-multi-instantiate.c -- 2.25.1

5 28

[PATCH v2 1/2] kselftest: alsa: Check for event generation when we write to controls
by Mark Brown 02 Feb '22

02 Feb '22

Add some coverage of event generation to mixer-test. Rather than doing a separate set of writes designed to trigger events we add a step to the existing write_and_verify() which checks to see if the value we read back from non-volatile controls matches the value before writing and that an event is or isn't generated as appropriate. The "tests" for events then simply check that no spurious or missing events were detected. This avoids needing further logic to generate appropriate values for each control type and maximises coverage. When checking for events we use a timeout of 0. This relies on the kernel generating any event prior to returning to userspace when setting a control. That is currently the case and it is difficult to see it changing, if it does the test will need to be updated. Using a delay of 0 means that we don't slow things down unduly when checking for no event or when events fail to be generated. We don't check behaviour for volatile controls since we can't tell what the behaviour is supposed to be for any given control. Signed-off-by: Mark Brown <broonie(a)kernel.org> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> --- v2: - Get the numid from the API rather than using the control index. tools/testing/selftests/alsa/mixer-test.c | 148 +++++++++++++++++++++- 1 file changed, 145 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index 0e88f4f3d802..79ffbca429ee 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -3,7 +3,7 @@ // kselftest for the ALSA mixer API // // Original author: Mark Brown <broonie(a)kernel.org> -// Copyright (c) 2021 Arm Limited +// Copyright (c) 2021-2 Arm Limited // This test will iterate over all cards detected in the system, exercising // every mixer control it can find. This may conflict with other system @@ -27,11 +27,12 @@ #include "../kselftest.h" -#define TESTS_PER_CONTROL 4 +#define TESTS_PER_CONTROL 6 struct card_data { snd_ctl_t *handle; int card; + struct pollfd pollfd; int num_ctls; snd_ctl_elem_list_t *ctls; struct card_data *next; @@ -43,6 +44,8 @@ struct ctl_data { snd_ctl_elem_info_t *info; snd_ctl_elem_value_t *def_val; int elem; + int event_missing; + int event_spurious; struct card_data *card; struct ctl_data *next; }; @@ -149,6 +152,7 @@ void find_controls(void) if (!ctl_data) ksft_exit_fail_msg("Out of memory\n"); + memset(ctl_data, 0, sizeof(*ctl_data)); ctl_data->card = card_data; ctl_data->elem = ctl; ctl_data->name = snd_ctl_elem_list_get_name(card_data->ctls, @@ -184,6 +188,26 @@ void find_controls(void) ctl_list = ctl_data; } + /* Set up for events */ + err = snd_ctl_subscribe_events(card_data->handle, true); + if (err < 0) { + ksft_exit_fail_msg("snd_ctl_subscribe_events() failed for card %d: %d\n", + card, err); + } + + err = snd_ctl_poll_descriptors_count(card_data->handle); + if (err != 1) { + ksft_exit_fail_msg("Unexpected desciptor count %d for card %d\n", + err, card); + } + + err = snd_ctl_poll_descriptors(card_data->handle, + &card_data->pollfd, 1); + if (err != 1) { + ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n", + card, err); + } + next_card: if (snd_card_next(&card) < 0) { ksft_print_msg("snd_card_next"); @@ -194,6 +218,73 @@ void find_controls(void) snd_config_delete(config); } +/* + * Block for up to timeout ms for an event, returns a negative value + * on error, 0 for no event and 1 for an event. + */ +int wait_for_event(struct ctl_data *ctl, int timeout) +{ + unsigned short revents; + snd_ctl_event_t *event; + int count, err; + unsigned int mask = 0; + unsigned int ev_id; + + snd_ctl_event_alloca(&event); + + do { + err = poll(&(ctl->card->pollfd), 1, timeout); + if (err < 0) { + ksft_print_msg("poll() failed for %s: %s (%d)\n", + ctl->name, strerror(errno), errno); + return -1; + } + /* Timeout */ + if (err == 0) + return 0; + + err = snd_ctl_poll_descriptors_revents(ctl->card->handle, + &(ctl->card->pollfd), + 1, &revents); + if (err < 0) { + ksft_print_msg("snd_ctl_poll_desciptors_revents() failed for %s: %d\n", + ctl->name, err); + return err; + } + if (revents & POLLERR) { + ksft_print_msg("snd_ctl_poll_desciptors_revents() reported POLLERR for %s\n", + ctl->name); + return -1; + } + /* No read events */ + if (!(revents & POLLIN)) { + ksft_print_msg("No POLLIN\n"); + continue; + } + + err = snd_ctl_read(ctl->card->handle, event); + if (err < 0) { + ksft_print_msg("snd_ctl_read() failed for %s: %d\n", + ctl->name, err); + return err; + } + + if (snd_ctl_event_get_type(event) != SND_CTL_EVENT_ELEM) + continue; + + /* The ID returned from the event is 1 less than numid */ + mask = snd_ctl_event_elem_get_mask(event); + ev_id = snd_ctl_event_elem_get_numid(event); + if (ev_id != snd_ctl_elem_info_get_numid(ctl->info)) { + ksft_print_msg("Event for unexpected ctl %s\n", + snd_ctl_event_elem_get_name(event)); + continue; + } + } while ((mask & SND_CTL_EVENT_MASK_VALUE) != SND_CTL_EVENT_MASK_VALUE); + + return 1; +} + bool ctl_value_index_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val, int index) { @@ -428,7 +519,8 @@ int write_and_verify(struct ctl_data *ctl, { int err, i; bool error_expected, mismatch_shown; - snd_ctl_elem_value_t *read_val, *w_val; + snd_ctl_elem_value_t *initial_val, *read_val, *w_val; + snd_ctl_elem_value_alloca(&initial_val); snd_ctl_elem_value_alloca(&read_val); snd_ctl_elem_value_alloca(&w_val); @@ -446,6 +538,18 @@ int write_and_verify(struct ctl_data *ctl, snd_ctl_elem_value_copy(expected_val, write_val); } + /* Store the value before we write */ + if (snd_ctl_elem_info_is_readable(ctl->info)) { + snd_ctl_elem_value_set_id(initial_val, ctl->id); + + err = snd_ctl_elem_read(ctl->card->handle, initial_val); + if (err < 0) { + ksft_print_msg("snd_ctl_elem_read() failed: %s\n", + snd_strerror(err)); + return err; + } + } + /* * Do the write, if we have an expected value ignore the error * and carry on to validate the expected value. @@ -470,6 +574,30 @@ int write_and_verify(struct ctl_data *ctl, return err; } + /* + * Check for an event if the value changed, or confirm that + * there was none if it didn't. We rely on the kernel + * generating the notification before it returns from the + * write, this is currently true, should that ever change this + * will most likely break and need updating. + */ + if (!snd_ctl_elem_info_is_volatile(ctl->info)) { + err = wait_for_event(ctl, 0); + if (snd_ctl_elem_value_compare(initial_val, read_val)) { + if (err < 1) { + ksft_print_msg("No event generated for %s\n", + ctl->name); + ctl->event_missing++; + } + } else { + if (err != 0) { + ksft_print_msg("Spurious event generated for %s\n", + ctl->name); + ctl->event_spurious++; + } + } + } + /* * Use the libray to compare values, if there's a mismatch * carry on and try to provide a more useful diagnostic than @@ -898,6 +1026,18 @@ void test_ctl_write_invalid(struct ctl_data *ctl) ctl->card->card, ctl->elem); } +void test_ctl_event_missing(struct ctl_data *ctl) +{ + ksft_test_result(!ctl->event_missing, "event_missing.%d.%d\n", + ctl->card->card, ctl->elem); +} + +void test_ctl_event_spurious(struct ctl_data *ctl) +{ + ksft_test_result(!ctl->event_spurious, "event_spurious.%d.%d\n", + ctl->card->card, ctl->elem); +} + int main(void) { struct ctl_data *ctl; @@ -917,6 +1057,8 @@ int main(void) test_ctl_write_default(ctl); test_ctl_write_valid(ctl); test_ctl_write_invalid(ctl); + test_ctl_event_missing(ctl); + test_ctl_event_spurious(ctl); } ksft_exit_pass(); -- 2.30.2

2 3

[PATCH] Revert "ASoC: amd: acp: Power on/off the speaker enable gpio pin based on DAPM callback."
by Curtis Malainey 02 Feb '22

02 Feb '22

This reverts commit 5c5f08f7fc0bee9a1bc3fbdcb7a21cfd0648ab14. This commit hard codes GPIO for max98357a drivers at a board specific level in the machine driver in the kernel itself. When used with a board that properly defines the GPIO pins in ACPI there is a resource contention over the GPIO pin and the card fails to probe. The amplifier driver has handled this pin lookup long before the this change landed and it the pin should continue to be owned by the amplifier as it is specific to that component. As a result this should be reverted. Signed-off-by: Curtis Malainey <cujomalainey(a)chromium.org> Cc: Rob Barnes <robbarnes(a)google.com> Cc: Eric Peers <epeers(a)google.com> --- sound/soc/amd/acp/Kconfig | 6 +++--- sound/soc/amd/acp/acp-legacy-mach.c | 19 +++---------------- sound/soc/amd/acp/acp-mach-common.c | 25 ------------------------- sound/soc/amd/acp/acp-mach.h | 10 +--------- sound/soc/amd/acp/acp-sof-mach.c | 21 +++------------------ 5 files changed, 10 insertions(+), 71 deletions(-) diff --git a/sound/soc/amd/acp/Kconfig b/sound/soc/amd/acp/Kconfig index d5838df3064b..154be5e70821 100644 --- a/sound/soc/amd/acp/Kconfig +++ b/sound/soc/amd/acp/Kconfig @@ -32,7 +32,7 @@ config SND_AMD_ASOC_RENOIR config SND_SOC_AMD_MACH_COMMON tristate - depends on X86 && PCI && I2C && GPIOLIB + depends on X86 && PCI && I2C select CLK_FIXED_FCH select SND_SOC_RT5682_I2C select SND_SOC_DMIC @@ -44,14 +44,14 @@ config SND_SOC_AMD_MACH_COMMON config SND_SOC_AMD_LEGACY_MACH tristate "AMD Legacy Machine Driver Support" - depends on X86 && PCI && I2C && GPIOLIB + depends on X86 && PCI && I2C select SND_SOC_AMD_MACH_COMMON help This option enables legacy sound card support for ACP audio. config SND_SOC_AMD_SOF_MACH tristate "AMD SOF Machine Driver Support" - depends on X86 && PCI && I2C && GPIOLIB + depends on X86 && PCI && I2C select SND_SOC_AMD_MACH_COMMON help This option enables SOF sound card support for ACP audio. diff --git a/sound/soc/amd/acp/acp-legacy-mach.c b/sound/soc/amd/acp/acp-legacy-mach.c index 0ad1cf41b308..de0f8024e2fb 100644 --- a/sound/soc/amd/acp/acp-legacy-mach.c +++ b/sound/soc/amd/acp/acp-legacy-mach.c @@ -27,7 +27,6 @@ static struct acp_card_drvdata rt5682_rt1019_data = { .hs_codec_id = RT5682, .amp_codec_id = RT1019, .dmic_codec_id = NONE, - .gpio_spkr_en = EN_SPKR_GPIO_GB, }; static const struct snd_kcontrol_new acp_controls[] = { @@ -42,16 +41,15 @@ static const struct snd_kcontrol_new acp_controls[] = { static const struct snd_soc_dapm_widget acp_widgets[] = { SND_SOC_DAPM_HP("Headphone Jack", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), - SND_SOC_DAPM_SPK("Spk", event_spkr_handler), - SND_SOC_DAPM_SPK("Left Spk", event_spkr_handler), - SND_SOC_DAPM_SPK("Right Spk", event_spkr_handler), + SND_SOC_DAPM_SPK("Spk", NULL), + SND_SOC_DAPM_SPK("Left Spk", NULL), + SND_SOC_DAPM_SPK("Right Spk", NULL), }; static int acp_asoc_probe(struct platform_device *pdev) { struct snd_soc_card *card = NULL; struct device *dev = &pdev->dev; - unsigned int spkr_gpio; int ret; if (!pdev->id_entry) @@ -69,20 +67,9 @@ static int acp_asoc_probe(struct platform_device *pdev) card->controls = acp_controls; card->num_controls = ARRAY_SIZE(acp_controls); card->drvdata = (struct acp_card_drvdata *)pdev->id_entry->driver_data; - spkr_gpio = ((struct acp_card_drvdata *)(card->drvdata))->gpio_spkr_en; acp_legacy_dai_links_create(card); - if (gpio_is_valid(spkr_gpio)) { - ret = devm_gpio_request(dev, spkr_gpio, "spkren"); - if (ret) { - dev_err(dev, "(%s) gpio request failed: %d\n", - __func__, ret); - return ret; - } - gpio_direction_output(spkr_gpio, 0); - } - ret = devm_snd_soc_register_card(&pdev->dev, card); if (ret) { dev_err(&pdev->dev, diff --git a/sound/soc/amd/acp/acp-mach-common.c b/sound/soc/amd/acp/acp-mach-common.c index c9caade5cb74..7386e5bb61b5 100644 --- a/sound/soc/amd/acp/acp-mach-common.c +++ b/sound/soc/amd/acp/acp-mach-common.c @@ -71,31 +71,6 @@ static const struct snd_soc_dapm_route rt5682_map[] = { { "IN1P", NULL, "Headset Mic" }, }; -int event_spkr_handler(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) -{ - struct snd_soc_dapm_context *dapm = w->dapm; - struct snd_soc_card *card = dapm->card; - struct acp_card_drvdata *drvdata = snd_soc_card_get_drvdata(card); - - if (!gpio_is_valid(drvdata->gpio_spkr_en)) - return 0; - - switch (event) { - case SND_SOC_DAPM_POST_PMU: - gpio_set_value(drvdata->gpio_spkr_en, 1); - break; - case SND_SOC_DAPM_PRE_PMD: - gpio_set_value(drvdata->gpio_spkr_en, 0); - break; - default: - dev_warn(card->dev, "%s invalid setting\n", __func__); - break; - } - return 0; -} -EXPORT_SYMBOL_NS_GPL(event_spkr_handler, SND_SOC_AMD_MACH); - /* Define card ops for RT5682 CODEC */ static int acp_card_rt5682_init(struct snd_soc_pcm_runtime *rtd) { diff --git a/sound/soc/amd/acp/acp-mach.h b/sound/soc/amd/acp/acp-mach.h index fd6299844ebe..5dc47cfbff10 100644 --- a/sound/soc/amd/acp/acp-mach.h +++ b/sound/soc/amd/acp/acp-mach.h @@ -17,12 +17,6 @@ #include <linux/input.h> #include <linux/module.h> #include <sound/soc.h> -#include <linux/gpio.h> -#include <linux/gpio/consumer.h> - -#define EN_SPKR_GPIO_GB 0x11F -#define EN_SPKR_GPIO_NK 0x146 -#define EN_SPKR_GPIO_NONE -EINVAL enum be_id { HEADSET_BE_ID = 0, @@ -55,11 +49,9 @@ struct acp_card_drvdata { unsigned int dai_fmt; struct clk *wclk; struct clk *bclk; - unsigned int gpio_spkr_en; }; int acp_sofdsp_dai_links_create(struct snd_soc_card *card); int acp_legacy_dai_links_create(struct snd_soc_card *card); -int event_spkr_handler(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event); + #endif diff --git a/sound/soc/amd/acp/acp-sof-mach.c b/sound/soc/amd/acp/acp-sof-mach.c index c1d9650fc222..dc2786cc81ef 100644 --- a/sound/soc/amd/acp/acp-sof-mach.c +++ b/sound/soc/amd/acp/acp-sof-mach.c @@ -27,7 +27,6 @@ static struct acp_card_drvdata sof_rt5682_rt1019_data = { .hs_codec_id = RT5682, .amp_codec_id = RT1019, .dmic_codec_id = DMIC, - .gpio_spkr_en = EN_SPKR_GPIO_GB, }; static struct acp_card_drvdata sof_rt5682_max_data = { @@ -37,7 +36,6 @@ static struct acp_card_drvdata sof_rt5682_max_data = { .hs_codec_id = RT5682, .amp_codec_id = MAX98360A, .dmic_codec_id = DMIC, - .gpio_spkr_en = EN_SPKR_GPIO_NK, }; static struct acp_card_drvdata sof_rt5682s_rt1019_data = { @@ -56,7 +54,6 @@ static struct acp_card_drvdata sof_rt5682s_max_data = { .hs_codec_id = RT5682S, .amp_codec_id = MAX98360A, .dmic_codec_id = DMIC, - .gpio_spkr_en = EN_SPKR_GPIO_NK, }; static const struct snd_kcontrol_new acp_controls[] = { @@ -70,16 +67,15 @@ static const struct snd_kcontrol_new acp_controls[] = { static const struct snd_soc_dapm_widget acp_widgets[] = { SND_SOC_DAPM_HP("Headphone Jack", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), - SND_SOC_DAPM_SPK("Spk", event_spkr_handler), - SND_SOC_DAPM_SPK("Left Spk", event_spkr_handler), - SND_SOC_DAPM_SPK("Right Spk", event_spkr_handler), + SND_SOC_DAPM_SPK("Spk", NULL), + SND_SOC_DAPM_SPK("Left Spk", NULL), + SND_SOC_DAPM_SPK("Right Spk", NULL), }; static int acp_sof_probe(struct platform_device *pdev) { struct snd_soc_card *card = NULL; struct device *dev = &pdev->dev; - unsigned int spkr_gpio; int ret; if (!pdev->id_entry) @@ -97,20 +93,9 @@ static int acp_sof_probe(struct platform_device *pdev) card->controls = acp_controls; card->num_controls = ARRAY_SIZE(acp_controls); card->drvdata = (struct acp_card_drvdata *)pdev->id_entry->driver_data; - spkr_gpio = ((struct acp_card_drvdata *)(card->drvdata))->gpio_spkr_en; acp_sofdsp_dai_links_create(card); - if (gpio_is_valid(spkr_gpio)) { - ret = devm_gpio_request(dev, spkr_gpio, "spkren"); - if (ret) { - dev_err(dev, "(%s) gpio request failed: %d\n", - __func__, ret); - return ret; - } - gpio_direction_output(spkr_gpio, 0); - } - ret = devm_snd_soc_register_card(&pdev->dev, card); if (ret) { dev_err(&pdev->dev, -- 2.32.0

4 6

[PATCH] ASoC: tas2770: Insert post reset delay
by Martin Povišer 02 Feb '22

02 Feb '22

Per TAS2770 datasheet there must be a 1 ms delay from reset to first command. So insert delays into the driver where appropriate. Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Martin Povišer <povik+lin(a)protonmail.com> --- sound/soc/codecs/tas2770.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c index b52c0861edc8..b397a2122dd4 100644 --- a/sound/soc/codecs/tas2770.c +++ b/sound/soc/codecs/tas2770.c @@ -38,10 +38,12 @@ static void tas2770_reset(struct tas2770_priv *tas2770) gpiod_set_value_cansleep(tas2770->reset_gpio, 0); msleep(20); gpiod_set_value_cansleep(tas2770->reset_gpio, 1); + usleep_range(1000, 2000); } snd_soc_component_write(tas2770->component, TAS2770_SW_RST, TAS2770_RST); + usleep_range(1000, 2000); } static int tas2770_set_bias_level(struct snd_soc_component *component, @@ -110,6 +112,7 @@ static int tas2770_codec_resume(struct snd_soc_component *component) if (tas2770->sdz_gpio) { gpiod_set_value_cansleep(tas2770->sdz_gpio, 1); + usleep_range(1000, 2000); } else { ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL, TAS2770_PWR_CTRL_MASK, @@ -529,8 +532,10 @@ static int tas2770_codec_probe(struct snd_soc_component *component) tas2770->component = component; - if (tas2770->sdz_gpio) + if (tas2770->sdz_gpio) { gpiod_set_value_cansleep(tas2770->sdz_gpio, 1); + usleep_range(1000, 2000); + } tas2770_reset(tas2770); -- 2.33.0

2 1

[PATCH] kselftest: alsa: Check for event generation when we write to controls
by Mark Brown 02 Feb '22

02 Feb '22

Add some coverage of event generation to mixer-test. Rather than doing a separate set of writes designed to trigger events we add a step to the existing write_and_verify() which checks to see if the value we read back from non-volatile controls matches the value before writing and that an event is or isn't generated as appropriate. The "tests" for events then simply check that no spurious or missing events were detected. This avoids needing further logic to generate appropriate values for each control type and maximises coverage. When checking for events we use a timeout of 0. This relies on the kernel generating any event prior to returning to userspace when setting a control. That is currently the case and it is difficult to see it changing, if it does the test will need to be updated. Using a delay of 0 means that we don't slow things down unduly when checking for no event or when events fail to be generated. We don't check behaviour for volatile controls since we can't tell what the behaviour is supposed to be for any given control. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/alsa/mixer-test.c | 148 +++++++++++++++++++++- 1 file changed, 145 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index 0e88f4f3d802..42cf3b724586 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -3,7 +3,7 @@ // kselftest for the ALSA mixer API // // Original author: Mark Brown <broonie(a)kernel.org> -// Copyright (c) 2021 Arm Limited +// Copyright (c) 2021-2 Arm Limited // This test will iterate over all cards detected in the system, exercising // every mixer control it can find. This may conflict with other system @@ -27,11 +27,12 @@ #include "../kselftest.h" -#define TESTS_PER_CONTROL 4 +#define TESTS_PER_CONTROL 6 struct card_data { snd_ctl_t *handle; int card; + struct pollfd pollfd; int num_ctls; snd_ctl_elem_list_t *ctls; struct card_data *next; @@ -43,6 +44,8 @@ struct ctl_data { snd_ctl_elem_info_t *info; snd_ctl_elem_value_t *def_val; int elem; + int event_missing; + int event_spurious; struct card_data *card; struct ctl_data *next; }; @@ -149,6 +152,7 @@ void find_controls(void) if (!ctl_data) ksft_exit_fail_msg("Out of memory\n"); + memset(ctl_data, 0, sizeof(*ctl_data)); ctl_data->card = card_data; ctl_data->elem = ctl; ctl_data->name = snd_ctl_elem_list_get_name(card_data->ctls, @@ -184,6 +188,26 @@ void find_controls(void) ctl_list = ctl_data; } + /* Set up for events */ + err = snd_ctl_subscribe_events(card_data->handle, true); + if (err < 0) { + ksft_exit_fail_msg("snd_ctl_subscribe_events() failed for card %d: %d\n", + card, err); + } + + err = snd_ctl_poll_descriptors_count(card_data->handle); + if (err != 1) { + ksft_exit_fail_msg("Unexpected desciptor count %d for card %d\n", + err, card); + } + + err = snd_ctl_poll_descriptors(card_data->handle, + &card_data->pollfd, 1); + if (err != 1) { + ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n", + card, err); + } + next_card: if (snd_card_next(&card) < 0) { ksft_print_msg("snd_card_next"); @@ -194,6 +218,73 @@ void find_controls(void) snd_config_delete(config); } +/* + * Block for up to timeout ms for an event, returns a negative value + * on error, 0 for no event and 1 for an event. + */ +int wait_for_event(struct ctl_data *ctl, int timeout) +{ + unsigned short revents; + snd_ctl_event_t *event; + int count, err; + unsigned int mask = 0; + unsigned int ev_id; + + snd_ctl_event_alloca(&event); + + do { + err = poll(&(ctl->card->pollfd), 1, timeout); + if (err < 0) { + ksft_print_msg("poll() failed for %s: %s (%d)\n", + ctl->name, strerror(errno), errno); + return -1; + } + /* Timeout */ + if (err == 0) + return 0; + + err = snd_ctl_poll_descriptors_revents(ctl->card->handle, + &(ctl->card->pollfd), + 1, &revents); + if (err < 0) { + ksft_print_msg("snd_ctl_poll_desciptors_revents() failed for %s: %d\n", + ctl->name, err); + return err; + } + if (revents & POLLERR) { + ksft_print_msg("snd_ctl_poll_desciptors_revents() reported POLLERR for %s\n", + ctl->name); + return -1; + } + /* No read events */ + if (!(revents & POLLIN)) { + ksft_print_msg("No POLLIN\n"); + continue; + } + + err = snd_ctl_read(ctl->card->handle, event); + if (err < 0) { + ksft_print_msg("snd_ctl_read() failed for %s: %d\n", + ctl->name, err); + return err; + } + + if (snd_ctl_event_get_type(event) != SND_CTL_EVENT_ELEM) + continue; + + /* The ID returned from the event is 1 less than numid */ + mask = snd_ctl_event_elem_get_mask(event); + ev_id = snd_ctl_event_elem_get_numid(event); + if (ev_id != ctl->elem + 1) { + ksft_print_msg("Event for unexpected ctl %s\n", + snd_ctl_event_elem_get_name(event)); + continue; + } + } while ((mask & SND_CTL_EVENT_MASK_VALUE) != SND_CTL_EVENT_MASK_VALUE); + + return 1; +} + bool ctl_value_index_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val, int index) { @@ -428,7 +519,8 @@ int write_and_verify(struct ctl_data *ctl, { int err, i; bool error_expected, mismatch_shown; - snd_ctl_elem_value_t *read_val, *w_val; + snd_ctl_elem_value_t *initial_val, *read_val, *w_val; + snd_ctl_elem_value_alloca(&initial_val); snd_ctl_elem_value_alloca(&read_val); snd_ctl_elem_value_alloca(&w_val); @@ -446,6 +538,18 @@ int write_and_verify(struct ctl_data *ctl, snd_ctl_elem_value_copy(expected_val, write_val); } + /* Store the value before we write */ + if (snd_ctl_elem_info_is_readable(ctl->info)) { + snd_ctl_elem_value_set_id(initial_val, ctl->id); + + err = snd_ctl_elem_read(ctl->card->handle, initial_val); + if (err < 0) { + ksft_print_msg("snd_ctl_elem_read() failed: %s\n", + snd_strerror(err)); + return err; + } + } + /* * Do the write, if we have an expected value ignore the error * and carry on to validate the expected value. @@ -470,6 +574,30 @@ int write_and_verify(struct ctl_data *ctl, return err; } + /* + * Check for an event if the value changed, or confirm that + * there was none if it didn't. We rely on the kernel + * generating the notification before it returns from the + * write, this is currently true, should that ever change this + * will most likely break and need updating. + */ + if (!snd_ctl_elem_info_is_volatile(ctl->info)) { + err = wait_for_event(ctl, 0); + if (snd_ctl_elem_value_compare(initial_val, read_val)) { + if (err < 1) { + ksft_print_msg("No event generated for %s\n", + ctl->name); + ctl->event_missing++; + } + } else { + if (err != 0) { + ksft_print_msg("Spurious event generated for %s\n", + ctl->name); + ctl->event_spurious++; + } + } + } + /* * Use the libray to compare values, if there's a mismatch * carry on and try to provide a more useful diagnostic than @@ -898,6 +1026,18 @@ void test_ctl_write_invalid(struct ctl_data *ctl) ctl->card->card, ctl->elem); } +void test_ctl_event_missing(struct ctl_data *ctl) +{ + ksft_test_result(!ctl->event_missing, "event_missing.%d.%d\n", + ctl->card->card, ctl->elem); +} + +void test_ctl_event_spurious(struct ctl_data *ctl) +{ + ksft_test_result(!ctl->event_spurious, "event_spurious.%d.%d\n", + ctl->card->card, ctl->elem); +} + int main(void) { struct ctl_data *ctl; @@ -917,6 +1057,8 @@ int main(void) test_ctl_write_default(ctl); test_ctl_write_valid(ctl); test_ctl_write_invalid(ctl); + test_ctl_event_missing(ctl); + test_ctl_event_spurious(ctl); } ksft_exit_pass(); -- 2.30.2

3 5

Re: [PATCH] wm8962: add a simple DMIC enable control
by Charles Keepax 02 Feb '22

02 Feb '22

On Wed, Feb 02, 2022 at 11:17:34AM +0100, Martin Kepplinger wrote: > Am Mittwoch, dem 02.02.2022 um 09:53 +0000 schrieb Charles Keepax: > > On Tue, Feb 01, 2022 at 04:01:13PM +0100, Martin Kepplinger wrote: > Do you have a code example from a different codec that has roughly what > is missing here? (the sound subsystem is new to me) Full disclosure this is complete untested, but it should be pretty close. Let me know if it does the trick and I will send a proper patch to the list. I do have a Librem 5 in a draw somewhere so can pull that out if we get really stuck, but that might have to wait until the weekend :-). I don't know if you guys are using the analogue bypass paths around the digital core on the chip. I think those will still work with the mics set to digital, so I have left the routes as is, but that might require some checking at some point. Thanks, Charles diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index a5584ba962dcf..2c41d31956aa8 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2049,6 +2049,13 @@ static SOC_ENUM_SINGLE_DECL(hpoutl_enum, static const struct snd_kcontrol_new hpoutl_mux = SOC_DAPM_ENUM("HPOUTL Mux", hpoutl_enum); +static const char * const input_mode_text[] = { "Analog", "Digital" }; + +static SOC_ENUM_SINGLE_VIRT_DECL(input_mode_enum, input_mode_text); + +static const struct snd_kcontrol_new input_mode_mux = + SOC_DAPM_ENUM("Input Mode", input_mode_enum); + static const struct snd_kcontrol_new inpgal[] = { SOC_DAPM_SINGLE("IN1L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 3, 1, 0), SOC_DAPM_SINGLE("IN2L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 2, 1, 0), @@ -2147,6 +2154,9 @@ SND_SOC_DAPM_MIXER("MIXINR", WM8962_PWR_MGMT_1, 4, 0, SND_SOC_DAPM_AIF_IN("DMIC_ENA", NULL, 0, WM8962_PWR_MGMT_1, 10, 0), +SND_SOC_DAPM_MUX("Input Mode L", SND_SOC_NOPM, 0, 0, &input_mode_mux), +SND_SOC_DAPM_MUX("Input Mode R", SND_SOC_NOPM, 0, 0, &input_mode_mux), + SND_SOC_DAPM_ADC("ADCL", "Capture", WM8962_PWR_MGMT_1, 3, 0), SND_SOC_DAPM_ADC("ADCR", "Capture", WM8962_PWR_MGMT_1, 2, 0), @@ -2226,16 +2236,19 @@ static const struct snd_soc_dapm_route wm8962_intercon[] = { { "DMIC_ENA", NULL, "DMICDAT" }, + { "Input Mode L", "Analog", "MIXINL" }, + { "Input Mode L", "Digital", "DMIC_ENA" }, + { "Input Mode R", "Analog", "MIXINR" }, + { "Input Mode R", "Digital", "DMIC_ENA" }, + { "ADCL", NULL, "SYSCLK" }, { "ADCL", NULL, "TOCLK" }, - { "ADCL", NULL, "MIXINL" }, - { "ADCL", NULL, "DMIC_ENA" }, + { "ADCL", NULL, "Input Mode L" }, { "ADCL", NULL, "DSP2" }, { "ADCR", NULL, "SYSCLK" }, { "ADCR", NULL, "TOCLK" }, - { "ADCR", NULL, "MIXINR" }, - { "ADCR", NULL, "DMIC_ENA" }, + { "ADCR", NULL, "Input Mode R" }, { "ADCR", NULL, "DSP2" }, { "STL", "Left", "ADCL" }, -- 2.11.0

1 0

Re: [PATCH] wm8962: add a simple DMIC enable control
by Charles Keepax 02 Feb '22

02 Feb '22

On Tue, Feb 01, 2022 at 04:01:13PM +0100, Martin Kepplinger wrote: > In order to use the external mic we need to switch DMIC_ENA off. When you say external mic do you mean an analogue mic connected to the INxy pins on the chip? > I know when DMIC is not used at all, the codec driver does > snd_soc_dapm_nc_pin(dapm, "DMICDAT"); but I'm not sure how I'd create > a control based on that. snd_soc_dapm_nc_pin should be called on DMICDAT if the GPIOs are not configured for use of a DMIC. And if called DMIC_ENA should never be set by the driver, since it can't be used as the pins are not configured to operate as DMICs. > I'm not yet looking into detection - only making it work when selected > manually, via ucm. Although I need detection too later. > > While this works when I set the control in ucm, AFAIK the way I do it > here is not correct though due to dapm. > > I guess this conflicts with the widget: > SND_SOC_DAPM_AIF_IN("DMIC_ENA", NULL, 0, WM8962_PWR_MGMT_1, 10, 0), > > Do you have any advice for me on how to do what I want? > Yes the DMIC enable should be controlled through DAPM when the relevant audio path is enabled. Just to check I understand the problem correctly. You have a system that has both analogue and digital mics connected, and the problem is that DMIC_ENA is then permanently enabled, meaning you can't access the audio from the analogue mics? Assuming I am correct above, looking through the DAPM graph it does look like the DMIC is oddly wired. It does appear to be hard wired into ADCL, which would indeed cause it to be permanently enabled if the pins are configured for DMIC. Assuming there isn't some reason the chip can't switch between digital and analogue modes (I can't see an obvious one in the datasheet), I think really there is a DAPM mux missing here. There should be a mux connecting both MIXINL and DMIC_ENA to ADCL/ADCR, rather than them both being directly connected that would let the user switch between analogue and digital inputs. Thanks, Charles

1 0