- Alsa-devel - mailman.alsa-project.org

[PATCH v3 0/4] ASoC: qcom: display port changes
by srinivas.kandagatla＠linaro.org 23 Jun '24

23 Jun '24

From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> This patchset adds support for. 1. parse Display Port module tokens from ASoC topology 2. add support to DP/HDMI Jack events. 3. fixes a typo in function name in sm8250 Verified these patches on X13s along with changes to tplg in https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/tree/topic/x… and ucm changes from https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp x1e80100 is verified by Krzysztof with his changes in tplg https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/merge_reques… Thanks, Srini Changes since v2: - remove hdmi references. - added more DP jacks - added some comments in code - added x1e80100 patch to this series Krzysztof Kozlowski (1): ASoC: qcom: x1e80100: Add USB DisplayPort plug support Srinivas Kandagatla (3): ASoC: qcom: q6dsp: parse Display port tokens ASoC: qcom: common: add Display port Jack function ASoC: qcom: sc8280xp: add Display port Jack sound/soc/qcom/common.c | 35 +++++++++++++++++++++++++++++++++ sound/soc/qcom/common.h | 3 +++ sound/soc/qcom/qdsp6/topology.c | 26 ++++++++++++++++++++++++ sound/soc/qcom/sc8280xp.c | 15 ++++++++++++++ sound/soc/qcom/x1e80100.c | 20 +++++++++++++++++++ 5 files changed, 99 insertions(+) -- 2.43.0

5 12

[PATCH v3 0/2] tlv320adc3xxx: Allow MICBIAS pins to be used as GPOs
by Ricard Wanderlof 23 Jun '24

23 Jun '24

In some cases, depending on system design, the MICBIAS pins on the chip are not needed as such, but a couple of extra GPIO pins would be useful. This patch allows the MICBIAS pins to be configured in the device tree as general purpose output pins, controlled via the GPIO framework. Owing to their originally intended purpose there are some limitations: when the MICBIAS pins are deactivated, they will float, so will likely need a pulldown in many applications. When activated, they will assume the voltage specified by the micbias1-vg and micbias2-vg properties, respectively, meaning that the resulting output voltage will be 2.0 V, 2.5 V or AVDD . Signed-off-by: Ricard Wanderlof <ricard.wanderlof(a)axis.com> --- Changes in v3: - Correct typos in property names in dependencies section - Add single quotes around properties in dependency lists (needed because the property names contain a comma) - Link to v2: https://lore.kernel.org/r/20240607-tlv320adc3xxx-micbias-gpo-v2-0-b140a45ff… Changes in v2: - Correct typo in yaml document for ti,micbias2-vg property reference - Add dependecies to yaml document for ti,micbias1-gio and ti,micbias2-gpo - Link to v1: https://lore.kernel.org/r/20240529-tlv320adc3xxx-micbias-gpo-v1-0-300d39cec… --- Ricard Wanderlof (2): ASoC: dt-bindings: tlv320adc3xxx: Add MICBIAS-as-GPO properties tlv320adc3xxx: Add support for using MICBIAS pins as GPO .../bindings/sound/ti,tlv320adc3xxx.yaml | 24 +++++ sound/soc/codecs/tlv320adc3xxx.c | 105 ++++++++++++++++----- 2 files changed, 108 insertions(+), 21 deletions(-) --- base-commit: 47d09270d7776e46858a161f94b735640b2fb056 change-id: 20240528-tlv320adc3xxx-micbias-gpo-b8b4d1c846d3 Best regards, -- -- Ricard Wolf Wanderlof ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30

3 4

[PATCH 0/6] ASoC: Few constifications (mostly arguments)
by Krzysztof Kozlowski 23 Jun '24

23 Jun '24

Make few pointers in ASoC functions as pointers to const, so the code is clearer to read, a bit safer and allows further constifications (e.g. placing some data as rodata). Best regards, Krzysztof --- Krzysztof Kozlowski (6): ASoC: Constify of_phandle_args in snd_soc_dai_driver ASoC: Constify of_phandle_args in snd_soc_dai_link_component ASoC: Constify passed data to core function ASoC: Constify DAI passed to get_channel_map ASoC: Constify return of snd_soc_dai_get_pcm_stream() ALSA: Cleanup trailing white-spaces include/sound/soc-dai.h | 26 +++++++------ include/sound/soc.h | 19 +++++----- sound/core/control_compat.c | 2 +- sound/core/device.c | 4 +- sound/core/hwdep.c | 10 ++--- sound/core/init.c | 3 +- sound/core/memalloc.c | 2 +- sound/core/memory.c | 2 +- sound/core/pcm.c | 22 +++++------ sound/core/pcm_compat.c | 2 +- sound/core/pcm_lib.c | 41 ++++++++++---------- sound/core/pcm_misc.c | 2 +- sound/core/pcm_native.c | 76 +++++++++++++++++++------------------- sound/core/seq_device.c | 2 +- sound/soc/codecs/lpass-rx-macro.c | 2 +- sound/soc/codecs/lpass-tx-macro.c | 2 +- sound/soc/codecs/lpass-va-macro.c | 2 +- sound/soc/codecs/lpass-wsa-macro.c | 2 +- sound/soc/codecs/wcd9335.c | 2 +- sound/soc/codecs/wcd934x.c | 2 +- sound/soc/intel/avs/pcm.c | 4 +- sound/soc/soc-core.c | 4 +- sound/soc/soc-dai.c | 14 +++---- sound/soc/soc-pcm.c | 26 ++++++------- sound/soc/soc-utils.c | 8 ++-- 25 files changed, 141 insertions(+), 140 deletions(-) --- base-commit: cf32e2eb8404572eaacd219dde4e703fad349299 change-id: 20240617-n-asoc-const-auto-selectable-formats-13fcc5000044 Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

2 9

[PATCH] ASoC: Intel: sst: Constify struct intel_sst_ops
by Christophe JAILLET 23 Jun '24

23 Jun '24

'struct intel_sst_ops' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 12250 1000 112 13362 3432 sound/soc/intel/atom/sst/sst.o After: ===== text data bss dec hex filename 12378 888 112 13378 3442 sound/soc/intel/atom/sst/sst.o Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> --- Compile tested-only --- sound/soc/intel/atom/sst/sst.c | 2 +- sound/soc/intel/atom/sst/sst.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/atom/sst/sst.c b/sound/soc/intel/atom/sst/sst.c index e0357d257c6c..ff03fde12151 100644 --- a/sound/soc/intel/atom/sst/sst.c +++ b/sound/soc/intel/atom/sst/sst.c @@ -158,7 +158,7 @@ static int sst_save_dsp_context_v2(struct intel_sst_drv *sst) } -static struct intel_sst_ops mrfld_ops = { +static const struct intel_sst_ops mrfld_ops = { .interrupt = intel_sst_interrupt_mrfld, .irq_thread = intel_sst_irq_thread_mrfld, .clear_interrupt = intel_sst_clear_intr_mrfld, diff --git a/sound/soc/intel/atom/sst/sst.h b/sound/soc/intel/atom/sst/sst.h index 126903e126e4..e0db7434543c 100644 --- a/sound/soc/intel/atom/sst/sst.h +++ b/sound/soc/intel/atom/sst/sst.h @@ -391,7 +391,7 @@ struct intel_sst_drv { unsigned int csr_value; void *fw_in_mem; struct sst_sg_list fw_sg_list, library_list; - struct intel_sst_ops *ops; + const struct intel_sst_ops *ops; struct sst_info info; struct pm_qos_request *qos; unsigned int use_dma; -- 2.45.2

1 0

[PATCH 0/8] iio: adc: dfsdm: add scaling support
by Olivier Moysan 23 Jun '24

23 Jun '24

The aim of this serie is to add scaling support to STM32 DFSDM peripheral in the analog context. The DFSDM currently operates as a consumer of IIO channels provided by a generic SD modulator. As previously discussed in RFC [1], this topology is not suitable for implementing scaling. This series brings the integration of the DFSDM driver with the new IIO backend framework [2], enabling the DFSDM IIO device to offer scaling feature based on reference voltage data obtained from the IIO SD modulator backend. This generic SD modulator backend takes the place of the former SD modulator, used with legacy implementation. The DFSDM driver has been updated to adopt the generic ADC channel binding [3]. The reasons for this include: - Reducing the use of proprietary properties - Simplifying the coexistence of legacy and new backend bindings - Prepare the support of the MDF peripheral on STM32MP25 SoC Backward compatibility is maintained through legacy support. This series extends the backend framework with the following APIs (which may need further refinement): - read_raw: This API is intented to retrieve the voltage information from the backend. It is based on IIO read_raw API, but maybe we need a more specialized API here. - iio_backend_disable / iio_backend_enable: backend enable/disable to be used for PM management - devm_iio_backend_subnode_get Intended for parsing DT subnodes to allow generic channel binding support, as generic channel DT nodes are not populated as devices. Ideally, a single API would be better, but I could not identify a suitable alternative that doesn't affect the existing API (devm_iio_backend_get). [1]: https://lore.kernel.org/lkml/20200204101008.11411-1-olivier.moysan@st.com/ [2]: https://lore.kernel.org/all/20240206-iio-backend-v9-0-df66d159c000@analog.c… [3]: devicetree/bindings/iio/adc/adc.yaml Olivier Moysan (8): iio: add read raw service to iio backend framework iio: add enable and disable services to iio backend framework iio: add child nodes support in iio backend framework dt-bindings: iio: dfsdm: move to backend framework dt-bindings: iio: add sigma delta modulator backend iio: adc: stm32-dfsdm: adopt generic channels bindings iio: add sd modulator generic iio backend iio: adc: stm32-dfsdm: add scaling support to dfsdm .../iio/adc/sd-modulator-backend.yaml | 43 +++ .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 158 ++++++++- drivers/iio/adc/Kconfig | 11 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/sd_adc_backend.c | 110 +++++++ drivers/iio/adc/stm32-dfsdm-adc.c | 302 +++++++++++++++--- drivers/iio/industrialio-backend.c | 90 +++++- include/linux/iio/backend.h | 7 + 8 files changed, 664 insertions(+), 58 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/sd-modulator-backend.yaml create mode 100644 drivers/iio/adc/sd_adc_backend.c base-commit: 7db8a847f98caae68c70bdab9ba92d1af38e5656 -- 2.25.1

4 5

[PATCH 1/8] ASoC: amd: acp: add a null check for chip_pdev structure
by Vijendar Mukunda 23 Jun '24

23 Jun '24

When acp platform device creation is skipped, chip->chip_pdev value will remain NULL. Add NULL check for chip->chip_pdev structure in snd_acp_resume() function to avoid null pointer dereference. Fixes: 088a40980efb ("ASoC: amd: acp: add pm ops support for acp pci driver") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- sound/soc/amd/acp/acp-pci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/amd/acp/acp-pci.c b/sound/soc/amd/acp/acp-pci.c index ad320b29e87d..aa3e72d13451 100644 --- a/sound/soc/amd/acp/acp-pci.c +++ b/sound/soc/amd/acp/acp-pci.c @@ -199,10 +199,12 @@ static int __maybe_unused snd_acp_resume(struct device *dev) ret = acp_init(chip); if (ret) dev_err(dev, "ACP init failed\n"); - child = chip->chip_pdev->dev; - adata = dev_get_drvdata(&child); - if (adata) - acp_enable_interrupts(adata); + if (chip->chip_pdev) { + child = chip->chip_pdev->dev; + adata = dev_get_drvdata(&child); + if (adata) + acp_enable_interrupts(adata); + } return ret; } -- 2.34.1

2 9

[PATCH 0/2] ASoC: add compatible for ti,pcm5242
by Christian Hewitt 22 Jun '24

22 Jun '24

Update bindings and add a driver compatible for the pcm5242 chip used on the Odroid HiFi-Shield2 i2c mezzanine board. Christian Hewitt (2): dt-bindings: sound: add ti,pcm5424 to pcm512x ASoC: Add support for ti,pcm5242 to the pcm512x driver Documentation/devicetree/bindings/sound/pcm512x.txt | 2 +- sound/soc/codecs/pcm512x-i2c.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) -- 2.34.1

2 5

[PATCH v2] ASoc: tas2781: Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s
by Shenghao Ding 22 Jun '24

22 Jun '24

Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s. name_prefix is not mandatory. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Add name_prefix as name prefix of calibration data file. v1: - Changed the copyright year to 2024 in tas2781-comlib.c. - Correct the filename in the header comments of tas2781-comlib.c, remove the wrong file name. - Add name_prefix as name of firmwares and kcontrol. --- include/sound/tas2781.h | 1 + sound/soc/codecs/tas2781-comlib.c | 13 +++++++++---- sound/soc/codecs/tas2781-i2c.c | 20 ++++++++++++++++---- 3 files changed, 26 insertions(+), 8 deletions(-) diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index 99ca3e401fd1..cd8ce522b78e 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -108,6 +108,7 @@ struct tasdevice_priv { unsigned char coef_binaryname[64]; unsigned char rca_binaryname[64]; unsigned char dev_name[32]; + const char *name_prefix; unsigned char ndev; unsigned int magic_num; unsigned int chip_id; diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 3aa81514dad7..6db1a260da82 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 // -// tas2781-lib.c -- TAS2781 Common functions for HDA and ASoC Audio drivers +// TAS2781 Common functions for HDA and ASoC Audio drivers // -// Copyright 2023 Texas Instruments, Inc. +// Copyright 2023 - 2024 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> @@ -277,8 +277,13 @@ int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, */ mutex_lock(&tas_priv->codec_lock); - scnprintf(tas_priv->rca_binaryname, 64, "%sRCA%d.bin", - tas_priv->dev_name, tas_priv->ndev); + if (tas_priv->name_prefix) + scnprintf(tas_priv->rca_binaryname, 64, "%s-%sRCA%d.bin", + tas_priv->name_prefix, tas_priv->dev_name, + tas_priv->ndev); + else + scnprintf(tas_priv->rca_binaryname, 64, "%sRCA%d.bin", + tas_priv->dev_name, tas_priv->ndev); crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); tas_priv->codec = codec; ret = request_firmware_nowait(module, FW_ACTION_UEVENT, diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index c64d458e524e..cc765d45c6b5 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -394,8 +394,12 @@ static void tasdevice_fw_ready(const struct firmware *fmw, * failing to load DSP firmware is NOT an error. */ tas_priv->fw_state = TASDEVICE_RCA_FW_OK; - scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", - tas_priv->dev_name); + if (tas_priv->name_prefix) + scnprintf(tas_priv->rca_binaryname, 64, "%s-%s_coef.bin", + tas_priv->name_prefix, tas_priv->dev_name); + else + scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", + tas_priv->dev_name); ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", @@ -418,8 +422,15 @@ static void tasdevice_fw_ready(const struct firmware *fmw, * calibrated data inside algo. */ for (i = 0; i < tas_priv->ndev; i++) { - scnprintf(tas_priv->cal_binaryname[i], 64, "%s_cal_0x%02x.bin", - tas_priv->dev_name, tas_priv->tasdevice[i].dev_addr); + if (tas_priv->name_prefix) + scnprintf(tas_priv->cal_binaryname[i], 64, + "%s-%s_cal_0x%02x.bin", tas_priv->name_prefix, + tas_priv->dev_name, + tas_priv->tasdevice[i].dev_addr); + else + scnprintf(tas_priv->cal_binaryname[i], 64, + "%s_cal_0x%02x.bin", tas_priv->dev_name, + tas_priv->tasdevice[i].dev_addr); ret = tas2781_load_calibration(tas_priv, tas_priv->cal_binaryname[i], i); if (ret != 0) @@ -579,6 +590,7 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec) { struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + tas_priv->name_prefix = codec->name_prefix; return tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready); } -- 2.34.1

1 0

[PATCH] ASoC: dt-bindings: add missing vender prefix on filename
by Kuninori Morimoto 21 Jun '24

21 Jun '24

Many Sound yaml files doesn't have vender prefix on filename. Add missing vender prefix for these files. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- .../bindings/sound/{ak4375.yaml => asahi-kasei,ak4375.yaml} | 2 +- .../bindings/sound/{ak4613.yaml => asahi-kasei,ak4613.yaml} | 2 +- .../bindings/sound/{ak4642.yaml => asahi-kasei,ak4642.yaml} | 2 +- .../bindings/sound/{sgtl5000.yaml => fsl,sgtl5000.yaml} | 2 +- .../bindings/sound/{zl38060.yaml => mscc,zl38060.yaml} | 2 +- .../bindings/sound/{rt1019.yaml => realtek,rt1019.yaml} | 2 +- .../devicetree/bindings/sound/{tas2562.yaml => ti,tas2562.yaml} | 2 +- .../devicetree/bindings/sound/{tas2770.yaml => ti,tas2770.yaml} | 2 +- .../devicetree/bindings/sound/{tas27xx.yaml => ti,tas27xx.yaml} | 2 +- .../bindings/sound/{tas5805m.yaml => ti,tas5805m.yaml} | 2 +- .../sound/{tlv320adcx140.yaml => ti,tlv320adcx140.yaml} | 2 +- .../devicetree/bindings/sound/{wm8750.yaml => wlf,wm8750.yaml} | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-) rename Documentation/devicetree/bindings/sound/{ak4375.yaml => asahi-kasei,ak4375.yaml} (94%) rename Documentation/devicetree/bindings/sound/{ak4613.yaml => asahi-kasei,ak4613.yaml} (94%) rename Documentation/devicetree/bindings/sound/{ak4642.yaml => asahi-kasei,ak4642.yaml} (94%) rename Documentation/devicetree/bindings/sound/{sgtl5000.yaml => fsl,sgtl5000.yaml} (97%) rename Documentation/devicetree/bindings/sound/{zl38060.yaml => mscc,zl38060.yaml} (96%) rename Documentation/devicetree/bindings/sound/{rt1019.yaml => realtek,rt1019.yaml} (90%) rename Documentation/devicetree/bindings/sound/{tas2562.yaml => ti,tas2562.yaml} (97%) rename Documentation/devicetree/bindings/sound/{tas2770.yaml => ti,tas2770.yaml} (97%) rename Documentation/devicetree/bindings/sound/{tas27xx.yaml => ti,tas27xx.yaml} (97%) rename Documentation/devicetree/bindings/sound/{tas5805m.yaml => ti,tas5805m.yaml} (95%) rename Documentation/devicetree/bindings/sound/{tlv320adcx140.yaml => ti,tlv320adcx140.yaml} (99%) rename Documentation/devicetree/bindings/sound/{wm8750.yaml => wlf,wm8750.yaml} (92%) diff --git a/Documentation/devicetree/bindings/sound/ak4375.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4375.yaml similarity index 94% rename from Documentation/devicetree/bindings/sound/ak4375.yaml rename to Documentation/devicetree/bindings/sound/asahi-kasei,ak4375.yaml index 587598e122c6..bc07fcba535b 100644 --- a/Documentation/devicetree/bindings/sound/ak4375.yaml +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4375.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/ak4375.yaml# +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4375.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: AK4375 DAC and headphones amplifier diff --git a/Documentation/devicetree/bindings/sound/ak4613.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4613.yaml similarity index 94% rename from Documentation/devicetree/bindings/sound/ak4613.yaml rename to Documentation/devicetree/bindings/sound/asahi-kasei,ak4613.yaml index 75e13414d6eb..b49a6cff9f1f 100644 --- a/Documentation/devicetree/bindings/sound/ak4613.yaml +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4613.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/ak4613.yaml# +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4613.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: AK4613 I2C transmitter diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4642.yaml similarity index 94% rename from Documentation/devicetree/bindings/sound/ak4642.yaml rename to Documentation/devicetree/bindings/sound/asahi-kasei,ak4642.yaml index 437fe5d7cae1..fc03f0373a1a 100644 --- a/Documentation/devicetree/bindings/sound/ak4642.yaml +++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4642.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/ak4642.yaml# +$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4642.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: AK4642 I2C transmitter diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/fsl,sgtl5000.yaml similarity index 97% rename from Documentation/devicetree/bindings/sound/sgtl5000.yaml rename to Documentation/devicetree/bindings/sound/fsl,sgtl5000.yaml index 1353c051488f..c6ab1ca16763 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,sgtl5000.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/sgtl5000.yaml# +$id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale SGTL5000 Stereo Codec diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/mscc,zl38060.yaml similarity index 96% rename from Documentation/devicetree/bindings/sound/zl38060.yaml rename to Documentation/devicetree/bindings/sound/mscc,zl38060.yaml index 8bd201e573aa..994313fd12b2 100644 --- a/Documentation/devicetree/bindings/sound/zl38060.yaml +++ b/Documentation/devicetree/bindings/sound/mscc,zl38060.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/zl38060.yaml# +$id: http://devicetree.org/schemas/sound/mscc,zl38060.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: ZL38060 Connected Home Audio Processor from Microsemi. diff --git a/Documentation/devicetree/bindings/sound/rt1019.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1019.yaml similarity index 90% rename from Documentation/devicetree/bindings/sound/rt1019.yaml rename to Documentation/devicetree/bindings/sound/realtek,rt1019.yaml index 3d5a91a942f4..adf5e38f4dbc 100644 --- a/Documentation/devicetree/bindings/sound/rt1019.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1019.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/rt1019.yaml# +$id: http://devicetree.org/schemas/sound/realtek,rt1019.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: RT1019 Mono Class-D Audio Amplifier diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml similarity index 97% rename from Documentation/devicetree/bindings/sound/tas2562.yaml rename to Documentation/devicetree/bindings/sound/ti,tas2562.yaml index d28c102c0ce7..8bc3b0c7531e 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas2562.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas2562.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2562 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml similarity index 97% rename from Documentation/devicetree/bindings/sound/tas2770.yaml rename to Documentation/devicetree/bindings/sound/ti,tas2770.yaml index be2536e8c440..362c2e6154f0 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2019-20 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas2770.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas2770.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2770 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml similarity index 97% rename from Documentation/devicetree/bindings/sound/tas27xx.yaml rename to Documentation/devicetree/bindings/sound/ti,tas27xx.yaml index f2d878f6f495..530bc3937847 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2020-2022 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas27xx.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas27xx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2764/TAS2780 Smart PA diff --git a/Documentation/devicetree/bindings/sound/tas5805m.yaml b/Documentation/devicetree/bindings/sound/ti,tas5805m.yaml similarity index 95% rename from Documentation/devicetree/bindings/sound/tas5805m.yaml rename to Documentation/devicetree/bindings/sound/ti,tas5805m.yaml index 12c41974274e..c2c2835a9e1d 100644 --- a/Documentation/devicetree/bindings/sound/tas5805m.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas5805m.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tas5805m.yaml# +$id: http://devicetree.org/schemas/sound/ti,tas5805m.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: TAS5805M audio amplifier diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml similarity index 99% rename from Documentation/devicetree/bindings/sound/tlv320adcx140.yaml rename to Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml index f3274bcc4c05..876fa97bfbcd 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml @@ -2,7 +2,7 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml# +$id: http://devicetree.org/schemas/sound/ti,tlv320adcx140.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter diff --git a/Documentation/devicetree/bindings/sound/wm8750.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml similarity index 92% rename from Documentation/devicetree/bindings/sound/wm8750.yaml rename to Documentation/devicetree/bindings/sound/wlf,wm8750.yaml index 24246ac7bbdf..96859e38315b 100644 --- a/Documentation/devicetree/bindings/sound/wm8750.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/sound/wm8750.yaml# +$id: http://devicetree.org/schemas/sound/wlf,wm8750.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: WM8750 and WM8987 audio CODECs -- 2.43.0

4 3

[PATCH] soundwire: bus: simplify by using local slave->prop
by Krzysztof Kozlowski 21 Jun '24

21 Jun '24

The sdw_initialize_slave() function stores 'slave->prop' as local 'prop' variable, so use it in all applicable places to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/soundwire/bus.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 191e6cc6f962..263ca32f0c5c 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -1410,7 +1410,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) } } if ((slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY) && - !(slave->prop.quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) { + !(prop->quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) { /* Clear parity interrupt before enabling interrupt mask */ status = sdw_read_no_pm(slave, SDW_SCP_INT1); if (status < 0) { @@ -1436,7 +1436,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) * device-dependent, it might e.g. only be enabled in * steady-state after a couple of frames. */ - val = slave->prop.scp_int1_mask; + val = prop->scp_int1_mask; /* Enable SCP interrupts */ ret = sdw_update_no_pm(slave, SDW_SCP_INTMASK1, val, val); @@ -1447,7 +1447,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) } /* No need to continue if DP0 is not present */ - if (!slave->prop.dp0_prop) + if (!prop->dp0_prop) return 0; /* Enable DP0 interrupts */ -- 2.43.0

3 2