- Alsa-devel - mailman.alsa-project.org

[PATCH 00/41] OMAP1 full multiplatform conversion
by Arnd Bergmann 22 Apr '22

22 Apr '22

From: Arnd Bergmann <arnd(a)arndb.de> This is the full series for converting OMAP1 to multiplatform, rebased from my 2019 attempt to do the same thing. The soc tree contains simpler patches to do the same for iop32x, ixp4xx, ep93xx and s3c24xx, which means we are getting closer to completing this for all ARMv5 platforms (I have patches for PXA, which is the last one remaining). Janusz already tested the branch separately and did the missing work for the common-clk conversion after my previous approach was broken. The fbdev, mmc and ASoC portion of Janusz' work already went into the corresponding maintainer tree, but I include them here for reference. Unless there are any objections, I would add the entire series to the for-next branch of the soc tree, but only send the first 36 patches early in the merge window. After everything else has made it in, I would rebase the last two patches and send them separately, which may or may not make it in the merge window. Arnd Arnd Bergmann (30): video: fbdev: omapfb: lcd_ams_delta: fix unused variable warning ARM: omap1: innovator: pass lcd control address as pdata ARM: omap1: move lcd_dma code into omapfb driver ARM: omap1: declare a dummy omap_set_dma_priority fbdev: omap: pass irqs as resource ARM: omap1: ams-delta: remove camera leftovers ARM: omap1: move mach/usb.h to include/linux/soc ARM: omap1: move some headers to include/linux/soc ARM: omap1: move perseus spi pinconf to board file ARM: omap1: move CF chipselect setup to board file fbdev: omap: avoid using mach/*.h files usb: omap: avoid mach/*.h headers clocksource: ti-dmtimer: avoid using mach/hardware.h serial: 8250/omap1: include linux/soc/ti/omap1-soc.h input: omap: void using mach/*.h headers ARM: omap1: innovator: move ohci phy power handling to board file ARM: omap1: move 32k counter from plat-omap to mach-omap1 ARM: omap: remove debug-leds driver ARM: omap: dma: make usb support optional dma: omap: hide legacy interface ARM: omap1: dma: remove omap2 specific bits ARM: omap1: move plat/dma.c to mach/omap-dma.c ARM: omap: split up arch/arm/plat-omap/Kconfig ARM: omap: un-merge plat/sram.c ARM: omap: remove empty plat-omap directory ARM: omap1: relocate static I/O mapping ARM: omap1: use pci_remap_iospace() for omap_cf ARM: omap1: move mach/*.h into mach directory ARM: omap1: fix build with no SoC selected [TO BE REBASED] ARM: omap1: enable multiplatform Janusz Krzysztofik (11): ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Remove noop code usb: host: ohci-omap: Make it CCF clk API compatible usb: gadget: omap_udc: Make it CCF clk API compatible [MERGED] video: fbdev: omap: Make it CCF clk API compatible [MERGED] mmc: omap: Make it CCF clk API compatible [MERGED] ASoC: ti: osk5912: Make it CCF clk API compatible [TO BE REBASED] ARM: OMAP1: clock: Convert to CCF arch/arm/Kconfig | 16 - arch/arm/Kconfig.debug | 6 +- arch/arm/Makefile | 1 - arch/arm/configs/omap1_defconfig | 3 + arch/arm/mach-omap1/Kconfig | 72 ++ arch/arm/mach-omap1/Makefile | 6 +- arch/arm/mach-omap1/ams-delta-fiq-handler.S | 3 +- arch/arm/mach-omap1/ams-delta-fiq.c | 2 + arch/arm/mach-omap1/ams-delta-fiq.h | 2 +- arch/arm/mach-omap1/board-ams-delta.c | 18 +- arch/arm/mach-omap1/board-fsample.c | 10 +- arch/arm/mach-omap1/board-generic.c | 8 +- arch/arm/mach-omap1/board-h2.c | 14 +- arch/arm/mach-omap1/board-h3.c | 16 +- arch/arm/mach-omap1/board-htcherald.c | 10 +- arch/arm/mach-omap1/board-innovator.c | 34 +- arch/arm/mach-omap1/board-nokia770.c | 8 +- arch/arm/mach-omap1/board-osk.c | 49 +- arch/arm/mach-omap1/board-palmte.c | 14 +- arch/arm/mach-omap1/board-palmtt.c | 14 +- arch/arm/mach-omap1/board-palmz71.c | 14 +- arch/arm/mach-omap1/board-perseus2.c | 15 +- arch/arm/mach-omap1/board-sx1-mmc.c | 3 +- arch/arm/mach-omap1/board-sx1.c | 12 +- arch/arm/mach-omap1/clock.c | 797 +++++++----------- arch/arm/mach-omap1/clock.h | 191 ++--- arch/arm/mach-omap1/clock_data.c | 508 +++++------ arch/arm/mach-omap1/common.h | 3 +- arch/arm/mach-omap1/devices.c | 12 +- arch/arm/mach-omap1/dma.c | 2 +- arch/arm/mach-omap1/fb.c | 19 +- arch/arm/mach-omap1/flash.c | 5 +- arch/arm/mach-omap1/fpga.c | 3 +- arch/arm/mach-omap1/gpio15xx.c | 3 +- arch/arm/mach-omap1/gpio16xx.c | 5 +- arch/arm/mach-omap1/gpio7xx.c | 3 +- .../mach-omap1/{include/mach => }/hardware.h | 136 +-- arch/arm/mach-omap1/i2c.c | 3 +- arch/arm/mach-omap1/id.c | 5 +- arch/arm/mach-omap1/include/mach/io.h | 45 - arch/arm/mach-omap1/include/mach/lcdc.h | 44 - arch/arm/mach-omap1/include/mach/memory.h | 12 - arch/arm/mach-omap1/include/mach/uncompress.h | 117 --- arch/arm/mach-omap1/io.c | 12 +- arch/arm/mach-omap1/irq.c | 4 +- arch/arm/mach-omap1/{include/mach => }/irqs.h | 2 - arch/arm/mach-omap1/mcbsp.c | 17 +- .../mach-omap1/{include/mach => }/mtd-xip.h | 3 +- arch/arm/mach-omap1/mux.c | 6 +- arch/arm/mach-omap1/mux.h | 144 ++++ arch/arm/mach-omap1/ocpi.c | 8 +- .../dma.c => mach-omap1/omap-dma.c} | 259 ++---- .../mach-omap1/{include/mach => }/omap1510.h | 0 .../mach-omap1/{include/mach => }/omap16xx.h | 0 .../mach-omap1/{include/mach => }/omap7xx.h | 0 arch/arm/mach-omap1/pm.c | 9 +- arch/arm/mach-omap1/pm.h | 2 + arch/arm/mach-omap1/reset.c | 3 +- arch/arm/mach-omap1/serial.c | 10 +- .../mach-omap1/{include/mach => }/serial.h | 0 arch/arm/mach-omap1/sleep.S | 2 +- arch/arm/mach-omap1/soc.h | 6 +- arch/arm/mach-omap1/sram-init.c | 91 +- arch/arm/mach-omap1/sram.S | 4 +- arch/arm/mach-omap1/sram.h | 4 +- arch/arm/mach-omap1/{include/mach => }/tc.h | 2 - arch/arm/mach-omap1/time.c | 7 +- arch/arm/mach-omap1/timer.c | 1 + arch/arm/mach-omap1/timer32k.c | 100 ++- arch/arm/mach-omap1/usb.c | 8 +- arch/arm/mach-omap1/usb.h | 25 + arch/arm/mach-omap2/Kconfig | 49 ++ arch/arm/mach-omap2/sram.c | 91 +- arch/arm/mach-omap2/sram.h | 5 +- arch/arm/plat-omap/Kconfig | 119 --- arch/arm/plat-omap/Makefile | 13 - arch/arm/plat-omap/counter_32k.c | 114 --- arch/arm/plat-omap/debug-leds.c | 171 ---- arch/arm/plat-omap/include/plat/counter-32k.h | 1 - arch/arm/plat-omap/include/plat/cpu.h | 21 - arch/arm/plat-omap/include/plat/sram.h | 8 - arch/arm/plat-omap/sram.c | 129 --- drivers/clocksource/timer-ti-dm.c | 2 +- drivers/dma/ti/omap-dma.c | 19 +- drivers/input/keyboard/omap-keypad.c | 1 + drivers/mmc/host/omap.c | 23 +- drivers/pcmcia/Kconfig | 3 +- drivers/pcmcia/omap_cf.c | 48 +- drivers/spi/Kconfig | 2 +- drivers/spi/spi-omap-uwire.c | 15 +- drivers/tty/serial/8250/8250.h | 1 + drivers/usb/gadget/udc/omap_udc.c | 19 +- drivers/usb/host/Kconfig | 2 +- drivers/usb/host/ohci-omap.c | 60 +- drivers/usb/phy/Kconfig | 3 +- drivers/usb/phy/phy-isp1301-omap.c | 6 +- drivers/video/backlight/Kconfig | 4 +- drivers/video/backlight/omap1_bl.c | 4 +- drivers/video/fbdev/Makefile | 2 +- drivers/video/fbdev/omap/Kconfig | 4 +- drivers/video/fbdev/omap/Makefile | 5 + drivers/video/fbdev/omap/hwa742.c | 6 +- drivers/video/fbdev/omap/lcd_ams_delta.c | 5 +- .../video/fbdev/omap}/lcd_dma.c | 7 +- .../video/fbdev/omap}/lcd_dma.h | 2 - drivers/video/fbdev/omap/lcd_inn1510.c | 9 +- drivers/video/fbdev/omap/lcd_osk.c | 4 +- drivers/video/fbdev/omap/lcdc.c | 16 +- drivers/video/fbdev/omap/lcdc.h | 35 + drivers/video/fbdev/omap/omapfb.h | 2 + drivers/video/fbdev/omap/omapfb_main.c | 19 +- drivers/video/fbdev/omap/sossi.c | 9 +- include/linux/omap-dma.h | 28 +- include/linux/platform_data/usb-omap1.h | 2 + include/linux/soc/ti/omap1-io.h | 143 ++++ .../mux.h => include/linux/soc/ti/omap1-mux.h | 142 +--- .../soc.h => include/linux/soc/ti/omap1-soc.h | 22 - .../usb.h => include/linux/soc/ti/omap1-usb.h | 28 +- sound/soc/ti/osk5912.c | 4 +- 119 files changed, 1809 insertions(+), 2610 deletions(-) rename arch/arm/mach-omap1/{include/mach => }/hardware.h (59%) delete mode 100644 arch/arm/mach-omap1/include/mach/io.h delete mode 100644 arch/arm/mach-omap1/include/mach/lcdc.h delete mode 100644 arch/arm/mach-omap1/include/mach/memory.h delete mode 100644 arch/arm/mach-omap1/include/mach/uncompress.h rename arch/arm/mach-omap1/{include/mach => }/irqs.h (99%) rename arch/arm/mach-omap1/{include/mach => }/mtd-xip.h (97%) create mode 100644 arch/arm/mach-omap1/mux.h rename arch/arm/{plat-omap/dma.c => mach-omap1/omap-dma.c} (84%) rename arch/arm/mach-omap1/{include/mach => }/omap1510.h (100%) rename arch/arm/mach-omap1/{include/mach => }/omap16xx.h (100%) rename arch/arm/mach-omap1/{include/mach => }/omap7xx.h (100%) rename arch/arm/mach-omap1/{include/mach => }/serial.h (100%) rename arch/arm/mach-omap1/{include/mach => }/tc.h (98%) create mode 100644 arch/arm/mach-omap1/usb.h delete mode 100644 arch/arm/plat-omap/Kconfig delete mode 100644 arch/arm/plat-omap/Makefile delete mode 100644 arch/arm/plat-omap/counter_32k.c delete mode 100644 arch/arm/plat-omap/debug-leds.c delete mode 100644 arch/arm/plat-omap/include/plat/counter-32k.h delete mode 100644 arch/arm/plat-omap/include/plat/cpu.h delete mode 100644 arch/arm/plat-omap/include/plat/sram.h delete mode 100644 arch/arm/plat-omap/sram.c rename {arch/arm/mach-omap1 => drivers/video/fbdev/omap}/lcd_dma.c (98%) rename {arch/arm/mach-omap1/include/mach => drivers/video/fbdev/omap}/lcd_dma.h (98%) create mode 100644 include/linux/soc/ti/omap1-io.h rename arch/arm/mach-omap1/include/mach/mux.h => include/linux/soc/ti/omap1-mux.h (53%) rename arch/arm/mach-omap1/include/mach/soc.h => include/linux/soc/ti/omap1-soc.h (90%) rename arch/arm/mach-omap1/include/mach/usb.h => include/linux/soc/ti/omap1-usb.h (86%) -- 2.29.2 Cc: Russell King <linux(a)armlinux.org.uk> Cc: Aaro Koskinen <aaro.koskinen(a)iki.fi> Cc: Tony Lindgren <tony(a)atomide.com> Cc: Paul Walmsley <paul(a)pwsan.com> Cc: Kevin Hilman <khilman(a)kernel.org> Cc: Peter Ujfalusi <peter.ujfalusi(a)gmail.com> Cc: Vinod Koul <vkoul(a)kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Cc: Ulf Hansson <ulf.hansson(a)linaro.org> Cc: Dominik Brodowski <linux(a)dominikbrodowski.net> Cc: Mark Brown <broonie(a)kernel.org> Cc: Felipe Balbi <balbi(a)kernel.org> Cc: Alan Stern <stern(a)rowland.harvard.edu> Cc: Lee Jones <lee.jones(a)linaro.org> Cc: Daniel Thompson <daniel.thompson(a)linaro.org> Cc: Jingoo Han <jingoohan1(a)gmail.com> Cc: Helge Deller <deller(a)gmx.de> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Linus Walleij <linus.walleij(a)linaro.org> Cc: Janusz Krzysztofik <jmkrzyszt(a)gmail.com> Cc: Krzysztof Kozlowski <krzk(a)kernel.org> Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-omap(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: dmaengine(a)vger.kernel.org Cc: linux-input(a)vger.kernel.org Cc: linux-mmc(a)vger.kernel.org Cc: linux-serial(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linux-fbdev(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org

8 58

[PATCH 1/2] ASoC: dt-bindings: max98396: add amplifier driver
by Ryan Lee 22 Apr '22

22 Apr '22

From: Ryan Lee <ryans.lee(a)analog.com> This patch adds dt-bindings information for Analog Devices MAX98396 and MAX98397 Smart Amplifier. Signed-off-by: Ryan Lee <ryans.lee(a)analog.com> --- .../bindings/sound/adi,max98396.yaml | 84 +++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/adi,max98396.yaml diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml new file mode 100644 index 000000000000..4aee32f43ad1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,max98396.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX98396 Speaker Amplifier Device Tree Bindings + +maintainers: + - Ryan Lee <ryans.lee(a)analog.com> + +description: + The MAX98396 is a mono Class-DG speaker amplifier with I/V sense. + The device provides a PCM interface for audio data and a standard + I2C interface for control data communication. + The MAX98397 is a variant of MAX98396 with wide input supply range. + +properties: + compatible: + enum: + - adi,max98396 + - adi,max98397 + reg: + maxItems: 1 + description: I2C address of the device. + + adi,vmon-slot-no: + description: slot number of the voltage sense monitor + minimum: 0 + maximum: 15 + default: 0 + + adi,imon-slot-no: + description: slot number of the current sense monitor + minimum: 0 + maximum: 15 + default: 0 + + adi,spkfb-slot-no: + description: slot number of speaker DSP monitor + minimum: 0 + maximum: 15 + default: 0 + + adi,interleave-mode: + type: boolean + description: For cases where a single combined channel for the I/V sense data is not sufficient, + the device can also be configured to share a single data output channel on alternating frames. + In this configuration, the current and voltage data will be frame interleaved on a single output channel. + default: false + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98396: amplifier@39 { + compatible = "adi,max98396"; + reg = <0x39>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + adi,interleave-mode = <0>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + max98397: amplifier@3c { + compatible = "adi,max98397"; + reg = <0x3c>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + adi,interleave-mode = <0>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; + -- 2.25.1

4 5

[PATCH] ALSA: hda: intel-dsp-config: Add RaptorLake PCI IDs
by Pierre-Louis Bossart 21 Apr '22

21 Apr '22

From: Gongjun Song <gongjun.song(a)intel.com> Add RaptorLake-P PCI IDs Reviewed-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Signed-off-by: Gongjun Song <gongjun.song(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- sound/hda/intel-dsp-config.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index 8b0a16ba27d39..a8fe01764b254 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -424,6 +424,15 @@ static const struct config_entry config_table[] = { .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, .device = 0x54c8, }, + /* RaptorLake-P */ + { + .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, + .device = 0x51ca, + }, + { + .flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE, + .device = 0x51cb, + }, #endif }; -- 2.30.2

2 1

[PATCH] ALSA: hda/realtek: Add quirk for Clevo NP70PNP
by Tim Crawford 21 Apr '22

21 Apr '22

Fixes headset detection on Clevo NP70PNP. Signed-off-by: Tim Crawford <tcrawford(a)system76.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 62fbf3772b41..f0f95e25f3f1 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9163,6 +9163,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x8562, "Clevo NH[57][0-9]RZ[Q]", ALC269_FIXUP_DMIC), SND_PCI_QUIRK(0x1558, 0x8668, "Clevo NP50B[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x866d, "Clevo NP5[05]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x867c, "Clevo NP7[01]PNP", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x867d, "Clevo NP7[01]PN[HJK]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8680, "Clevo NJ50LU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8686, "Clevo NH50[CZ]U", ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME), -- 2.35.1

2 1

[PATCH] ASoC: soc-ops: fix error handling
by Pierre-Louis Bossart 21 Apr '22

21 Apr '22

cppcheck throws the following warning: sound/soc/soc-ops.c:461:8: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] ret = err; ^ This seems to be a missing change in the return value. Fixes: 7f3d90a351968 ("ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_sx()") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/soc-ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index a0ca58ba16273..58347eadd219b 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -461,7 +461,7 @@ int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol, ret = err; } } - return err; + return ret; } EXPORT_SYMBOL_GPL(snd_soc_put_volsw_sx); -- 2.30.2

2 1

[PATCH v2 0/2] ASoC: SOF: AMD updates
by Pierre-Louis Bossart 21 Apr '22

21 Apr '22

these patches were originally submitted in the "ASoC: SOF: AMD/Mediatek updates" series, but there was a bisect issue on the first patch. sound/soc/sof/amd/acp.c:176:29: error: unused variable ‘sdev’ [-Werror=unused-variable] resubmitting as v2 with each patch compiling without warning. Ajit Kumar Pandey (2): ASoC: SOF: amd: Add psp_mbox_ready() and psp_send_cmd() callback ASoC: SOF: amd: Use dedicated MBOX for ACP and PSP communication sound/soc/sof/amd/acp.c | 66 ++++++++++++++++++++++++++++++++++++----- sound/soc/sof/amd/acp.h | 6 ++-- 2 files changed, 63 insertions(+), 9 deletions(-) -- 2.30.2

2 3

[PATCH] ASoC: Intel: sof_ssp_amp: remove 'set-but-not-used' warning
by Pierre-Louis Bossart 21 Apr '22

21 Apr '22

Clang warning: >> sound/soc/intel/boards/sof_ssp_amp.c:97:6: warning: variable 'i' set but not used [-Wunused-but-set-variable] int i = 0; ^ The device counter is not used when the quirk is not set, which static analysis cannot know. Move its initialization before the loop to remove this warning. Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/intel/boards/sof_ssp_amp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/sof_ssp_amp.c b/sound/soc/intel/boards/sof_ssp_amp.c index 02a27aaed92fb..8f5b9ebbe8287 100644 --- a/sound/soc/intel/boards/sof_ssp_amp.c +++ b/sound/soc/intel/boards/sof_ssp_amp.c @@ -94,7 +94,7 @@ static int sof_card_late_probe(struct snd_soc_card *card) char jack_name[NAME_SIZE]; struct sof_hdmi_pcm *pcm; int err; - int i = 0; + int i; if (!(sof_ssp_amp_quirk & SOF_HDMI_PLAYBACK_PRESENT)) return 0; @@ -113,6 +113,7 @@ static int sof_card_late_probe(struct snd_soc_card *card) return hda_dsp_hdmi_build_controls(card, component); } + i = 0; list_for_each_entry(pcm, &ctx->hdmi_pcm_list, head) { component = pcm->codec_dai->component; snprintf(jack_name, sizeof(jack_name), -- 2.30.2

2 1

[PATCH v1 0/3] ASoC: meson: Fix mixer-test issues
by Mark Brown 21 Apr '22

21 Apr '22

These patches fix event generation issues in the custom controls in the Meson drivers detected by mixer-test and by inspection once I saw the pattern in these drivers. I'm also seeing other failures due to these controls having invalid values, eg: # # AIU ACODEC SRC.0 value 3 more than item count 3 but without documentation I'm not sure how to interpret/fix these - either the value should be fixed up on startup or there should be an extra value there (disconnected possibly?). Mark Brown (3): ASoC: meson: Fix event generation for AUI ACODEC mux ASoC: meson: Fix event generation for AUI CODEC mux ASoC: meson: Fix event generation for G12A tohdmi mux sound/soc/meson/aiu-acodec-ctrl.c | 2 +- sound/soc/meson/aiu-codec-ctrl.c | 2 +- sound/soc/meson/g12a-tohdmitx.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) base-commit: 3123109284176b1532874591f7c81f3837bbdc17 -- 2.30.2

2 6

[V4 1/2] ASoC: max98390: Add reset gpio control
by Steve Lee 21 Apr '22

21 Apr '22

Add reset gpio control to support RESET PIN connected to gpio. Signed-off-by: Steve Lee <steve.lee.analog(a)gmail.com> --- V3 -> V4: change reset gpio control as GPIO_ACTIVE_LOW in DT sound/soc/codecs/max98390.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c index 40fd6f363f35..bdfd6cccc3d2 100644 --- a/sound/soc/codecs/max98390.c +++ b/sound/soc/codecs/max98390.c @@ -1022,6 +1022,7 @@ static int max98390_i2c_probe(struct i2c_client *i2c, struct max98390_priv *max98390 = NULL; struct i2c_adapter *adapter = i2c->adapter; + struct gpio_desc *reset_gpio; ret = i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE @@ -1073,6 +1074,17 @@ static int max98390_i2c_probe(struct i2c_client *i2c, return ret; } + reset_gpio = devm_gpiod_get_optional(&i2c->dev, + "reset", GPIOD_OUT_HIGH); + + /* Power on device */ + if (reset_gpio) { + usleep_range(1000, 2000); + /* bring out of reset */ + gpiod_set_value_cansleep(reset_gpio, 0); + usleep_range(1000, 2000); + } + /* Check Revision ID */ ret = regmap_read(max98390->regmap, MAX98390_R24FF_REV_ID, &reg); -- 2.17.1

3 3

[PATCH] ASoC: audio-graph-card2: indicate "Experimental stage" warning only when successed
by Kuninori Morimoto 21 Apr '22

21 Apr '22

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Because Sound Card needs many drivers to probe, current audio-graph-card2 will indicate "Experimental stage" at top of probe function even though in case it gets -EPROBE_DEFER, thus it will be indicated many times. This patch indicates it when probe was succeeded. [ 1.601393] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage ... [ 1.721269] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage ... [ 1.755231] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage ... [ 1.907710] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage ... [ 1.933173] rcar_sound ec500000.sound: probed [ 1.948875] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage [ 1.959558] asoc-audio-graph-card2 sound: ak4613-hifi <-> rsnd-dai.0 mapping ok [ 1.968119] asoc-audio-graph-card2 sound: i2s-hifi <-> rsnd-dai.1 mapping ok Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/generic/audio-graph-card2.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/generic/audio-graph-card2.c b/sound/soc/generic/audio-graph-card2.c index 75a1aeb75d2c..8b11840d810f 100644 --- a/sound/soc/generic/audio-graph-card2.c +++ b/sound/soc/generic/audio-graph-card2.c @@ -1174,8 +1174,6 @@ int audio_graph2_parse_of(struct asoc_simple_priv *priv, struct device *dev, struct link_info *li; int ret; - dev_warn(dev, "Audio Graph Card2 is still under Experimental stage\n"); - li = devm_kzalloc(dev, sizeof(*li), GFP_KERNEL); if (!li) return -ENOMEM; @@ -1240,6 +1238,9 @@ int audio_graph2_parse_of(struct asoc_simple_priv *priv, struct device *dev, if (ret < 0) dev_err_probe(dev, ret, "parse error\n"); + if (ret == 0) + dev_warn(dev, "Audio Graph Card2 is still under Experimental stage\n"); + return ret; } EXPORT_SYMBOL_GPL(audio_graph2_parse_of); -- 2.25.1

2 1