- Alsa-devel - mailman.alsa-project.org

[PATCH 00/13] ctl: add interfaces for element information
by GitHub pull_request - opened 01 Jun '22

01 Jun '22

alsa-project/alsa-gobject pull request #71 was opened from takaswie: Current implementation uses function of ElemInfo to express variants of element information, however it's not enough convenient in the case of language bindings. The usage of GObject.Value in object property is expected to be supported widely instead. This patchset uses object classes derived from GObject to express the variants. The common properties are expressed by two interfaces; ElemInfoCommon and ElemInfoSingleArray. All of classes implement the former, and the latter is implemented except for IEC60958 element information. ``` Takashi Sakamoto (13): ctl: card: fix indentation fix missing usage of declaration macro ctl: card: add error path when generating name list at element addition ctl: elem-info-common: add common interface for element information ctl: elem-info-iec60958: add class for element information of IEC60958 type ctl: elem-info-single-array: add interface for single array element information ctl: elem-info-boolean: add class for element information of boolean type ctl: elem-info-bytes: add class for element information of bytes type ctl: elem-info-integer: add class for element information of integer type ctl: elem-info-integer64: add class for element information of integer64 type ctl: elem-info-enumerated: add class for element information of enumerated type ctl: card: use ALSACtl.ElemInfoCommon instead of ElemInfo ctl: elem-info: remove unused classes samples/ctl | 56 +-- src/ctl/alsactl-enum-types.h | 4 + src/ctl/alsactl.h | 10 +- src/ctl/alsactl.map | 30 +- src/ctl/card.c | 156 ++++--- src/ctl/card.h | 6 +- src/ctl/elem-info-boolean.c | 90 +++++ src/ctl/elem-info-boolean.h | 22 + src/ctl/elem-info-bytes.c | 89 ++++ src/ctl/elem-info-bytes.h | 21 + src/ctl/elem-info-common.c | 135 +++++++ src/ctl/elem-info-common.h | 20 + src/ctl/elem-info-enumerated.c | 137 +++++++ src/ctl/elem-info-enumerated.h | 22 + src/ctl/elem-info-iec60958.c | 80 ++++ src/ctl/elem-info-iec60958.h | 22 + src/ctl/elem-info-integer.c | 162 ++++++++ src/ctl/elem-info-integer.h | 22 + src/ctl/elem-info-integer64.c | 162 ++++++++ src/ctl/elem-info-integer64.h | 22 + src/ctl/elem-info-single-array.c | 68 ++++ src/ctl/elem-info-single-array.h | 20 + src/ctl/elem-info.c | 379 ------------------ src/ctl/elem-info.h | 30 -- src/ctl/meson.build | 18 +- src/ctl/privates.h | 54 ++- src/hwdep/alsahwdep-enum-types.h | 4 + src/rawmidi/alsarawmidi-enum-types.h | 4 + src/seq/alsaseq-enum-types.h | 4 + src/timer/alsatimer-enum-types.h | 4 + ...tl-elem-info => alsactl-elem-info-boolean} | 10 +- tests/alsactl-elem-info-bytes | 26 ++ tests/alsactl-elem-info-enumerated | 27 ++ tests/alsactl-elem-info-iec60958 | 25 ++ tests/alsactl-elem-info-integer | 29 ++ tests/alsactl-elem-info-integer64 | 29 ++ tests/meson.build | 7 +- 37 files changed, 1492 insertions(+), 514 deletions(-) create mode 100644 src/ctl/elem-info-boolean.c create mode 100644 src/ctl/elem-info-boolean.h create mode 100644 src/ctl/elem-info-bytes.c create mode 100644 src/ctl/elem-info-bytes.h create mode 100644 src/ctl/elem-info-common.c create mode 100644 src/ctl/elem-info-common.h create mode 100644 src/ctl/elem-info-enumerated.c create mode 100644 src/ctl/elem-info-enumerated.h create mode 100644 src/ctl/elem-info-iec60958.c create mode 100644 src/ctl/elem-info-iec60958.h create mode 100644 src/ctl/elem-info-integer.c create mode 100644 src/ctl/elem-info-integer.h create mode 100644 src/ctl/elem-info-integer64.c create mode 100644 src/ctl/elem-info-integer64.h create mode 100644 src/ctl/elem-info-single-array.c create mode 100644 src/ctl/elem-info-single-array.h delete mode 100644 src/ctl/elem-info.c delete mode 100644 src/ctl/elem-info.h rename tests/{alsactl-elem-info => alsactl-elem-info-boolean} (68%) create mode 100644 tests/alsactl-elem-info-bytes create mode 100644 tests/alsactl-elem-info-enumerated create mode 100644 tests/alsactl-elem-info-iec60958 create mode 100644 tests/alsactl-elem-info-integer create mode 100644 tests/alsactl-elem-info-integer64 ``` Request URL : https://github.com/alsa-project/alsa-gobject/pull/71 Patch URL : https://github.com/alsa-project/alsa-gobject/pull/71.patch Repository URL: https://github.com/alsa-project/alsa-gobject

1 0

ucm2: rk3399-gru-sound: Add missing symlink from conf.d tree
by GitHub pull_request - opened 31 May '22

31 May '22

alsa-project/alsa-ucm-conf pull request #162 was opened from alpernebbi: Since V2Module lookup was disabled my rk3399-gru-kevin chromebook can't find the UCM it's supposed to use. This adds a `conf.d/rk3399-gru-soun/rk3399-gru-soun.conf` symlink for it. The name is not a typo: $ cat /proc/asound/cards 0 [rk3399grusound ]: rk3399-gru-soun - rk3399-gru-sound Unknown-UnknownProduct- $ strace -e trace=file pulseaudio 2>&1 | grep -i ucm2 faccessat(AT_FDCWD, "/usr/share/alsa/ucm2/ucm.conf", R_OK) = 0 openat(AT_FDCWD, "/usr/share/alsa/ucm2/ucm.conf", O_RDONLY) = 16 openat(AT_FDCWD, "/usr/share/alsa/ucm2/lib/generic.conf", O_RDONLY) = 16 faccessat(AT_FDCWD, "/usr/share/alsa/ucm2/conf.d/rk3399-gru-soun/Unknown-UnknownProduct-.conf", R_OK) = -1 ENOENT (No such file or directory) faccessat(AT_FDCWD, "/usr/share/alsa/ucm2/conf.d/rk3399-gru-soun/rk3399-gru-soun.conf", R_OK) = -1 ENOENT (No such file or directory) faccessat(AT_FDCWD, "/usr/share/alsa/ucm2/ucm.conf", R_OK) = 0 openat(AT_FDCWD, "/usr/share/alsa/ucm2/ucm.conf", O_RDONLY) = 16 openat(AT_FDCWD, "/usr/share/alsa/ucm2/lib/generic.conf", O_RDONLY) = 16 faccessat(AT_FDCWD, "/usr/share/alsa/ucm2/conf.d/rk3399-gru-soun/Unknown-UnknownProduct-.conf", R_OK) = -1 ENOENT (No such file or directory) faccessat(AT_FDCWD, "/usr/share/alsa/ucm2/conf.d/rk3399-gru-soun/rk3399-gru-soun.conf", R_OK) = -1 ENOENT (No such file or directory) (Ignore the `Unknown-UnknownProduct-`, that's because I'm using a custom unfinished U-Boot build. For more info there's an [older alsa-info output](https://alsa-project.org/db/?f=9b4102975fa9c0f109af6ad687c856c620d7… I had uploaded) Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/162 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/162.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ALSA 1.2.7 release
by Jaroslav Kysela 31 May '22

31 May '22

Hello all, new ALSA userspace packages were released. You may download them from the ALSA website http://www.alsa-project.org or directly: HTTP: https://www.alsa-project.org/files/pub FTP: ftp://ftp.alsa-project.org/pub Released packages: alsa-lib alsa-utils alsa-ucm-conf pyalsa Full list of changes: https://www.alsa-project.org/wiki/Changes_v1.2.6.3_v1.2.7 The fingerprint of the public signing key is: F04D F507 37AC 1A88 4C4B 3D71 8380 596D A6E5 9C91 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

1 0

[PATCH] selftests: alsa: Handle pkg-config failure more gracefully
by Mark Brown 31 May '22

31 May '22

Follow the pattern used by other selftests like memfd and fall back on the standard toolchain options to build with a system installed alsa-lib if we don't get anything from pkg-config. This reduces our build dependencies a bit in the common case while still allowing use of pkg-config in case there is a need for it. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/alsa/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/alsa/Makefile b/tools/testing/selftests/alsa/Makefile index f64d9090426d..fd8ddce2b1a6 100644 --- a/tools/testing/selftests/alsa/Makefile +++ b/tools/testing/selftests/alsa/Makefile @@ -3,6 +3,9 @@ CFLAGS += $(shell pkg-config --cflags alsa) LDLIBS += $(shell pkg-config --libs alsa) +ifeq ($(LDLIBS),) +LDLIBS += -lasound +endif TEST_GEN_PROGS := mixer-test -- 2.30.2

2 1

[PATCH] ALSA: usb-audio: Optimize TEAC clock quirk
by Takashi Iwai 31 May '22

31 May '22

Maris found out that the quirk for TEAC devices to work around the clock setup is needed to apply only when the base clock is changed, e.g. from 48000-based clocks (48000, 96000, 192000, 384000) to 44100-based clocks (44100, 88200, 176400, 352800), or vice versa, while switching to another clock with the same base clock doesn't need the (forcible) interface setup. This patch implements the optimization for the TEAC clock quirk to avoid the unnecessary interface re-setup. Fixes: 5ce0b06ae5e6 ("ALSA: usb-audio: Workaround for clock setup on TEAC devices") Reported-by: Maris Abele <maris7abele(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/clock.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/usb/clock.c b/sound/usb/clock.c index 3c435d379306..db429320599e 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -573,10 +573,14 @@ static int set_sample_rate_v2v3(struct snd_usb_audio *chip, } /* FIXME - TEAC devices require the immediate interface setup */ - if (rate != prev_rate && USB_ID_VENDOR(chip->usb_id) == 0x0644) { - usb_set_interface(chip->dev, fmt->iface, fmt->altsetting); - if (chip->quirk_flags & QUIRK_FLAG_IFACE_DELAY) - msleep(50); + if (USB_ID_VENDOR(chip->usb_id) == 0x0644) { + bool cur_base_48k = (rate % 48000 == 0); + bool prev_base_48k = (prev_rate % 48000 == 0); + if (cur_base_48k != prev_base_48k) { + usb_set_interface(chip->dev, fmt->iface, fmt->altsetting); + if (chip->quirk_flags & QUIRK_FLAG_IFACE_DELAY) + msleep(50); + } } validation: -- 2.35.3

1 0

[PATCH v3 00/15] ASoC: Intel: avs: Driver core and PCM operations
by Cezary Rojewski 31 May '22

31 May '22

Part three of main AVS driver series. This series was originally part of the initial series which was later divided [1] into smaller, easier-to-review chunks. Thus, many patches found here were already present on the list. This series consists of code typical to many drivers - PCI driver operations, trace ability, PM operations - as well as PCM handlers for all standard audio interfaces, that is, HDA, I2S and DMIC are found here. Series starts with updating firmware boot flow - libraries are no longer ignored. This change is dependent on already merged topology code [2] and because of that could not be part of the initial series [1]. PCM operations are split into four changes. First component operations alone i.e. operations which are usually agnostic towards path position (FE/BE). Then it continues with "generic" FE operations - there is no interface split here as from Intel ADSP point of view, FE, or HOST side as it's called in the specs, involves HD-Audio operations only. BE (also known as LINK) side on the other hand is divided into "non-HD-Audio" and HD-Audio part. The former represents transfer over DMIC and I2S interfaces both. While patches implementing standard PCI driver operations along (again standard) HD-Audio initialization routines followed up by power management handlers are two major ones, series covers also other important subjects such as: While patches implementing standard PCI driver operations along (again standard) HD-Audio initialization routines followed up by power management handlers are two major ones, series covers also other important subjects such as: - event tracing - preparation for firmware tracing (debugability) - coredump (debugability) - recovery flow (attempt recovery after IPC timeout or exception) - D0ix (D0 device substate, complements standard power management) Series is finalized by actual addition of supported platforms: SKL and APL-based. Platform-specific files are limited to firmware-specific bits, that is, bits that are specific to given firmware generation. Everything else is shared and is part of already upstream messaging code found in ipc.c, messages.c and messages.h files. Changes in v3: - addressed (hopefully) trace-code compilation under .configs with CONFIG_FTRACE dropped Changes in v2: - usage of avs_releast_last_firmware() dropped in error path for library loading procedure as suggested by Pierre - 'link_mask' usage replaced with 'i2s_link_mask' as requested by Pierre. Existing code addressed with new patch: "ASoC: Intel: avs: Replace link_mask usage with i2s_link_mask" - fixed possible race during recovery flow (->recovering flag is now atomic and tested in single location only). - dropped platform prefixes for basically all i2s board descriptors - 'ssp_test' renamed to 'i2s_test' to match naming convention of other boards - simplified PM implementation for current series, 'low_power' bits moved to future series - replaced SND_INTEL_DSP_DRIVER_SST with _AVS as suggested by Mark. Required changes to intel-dspcfg will be added in future series - number of typos across commit messages addressed [1]: https://lore.kernel.org/all/20220311153544.136854-1-cezary.rojewski@intel.c… [2]: https://lore.kernel.org/all/20220331135246.993089-1-cezary.rojewski@intel.c… Cezary Rojewski (14): ASoC: Intel: avs: Account for libraries when booting basefw ASoC: Intel: avs: Generic soc component driver ASoC: Intel: avs: Generic PCM FE operations ASoC: Intel: avs: non-HDA PCM BE operations ASoC: Intel: avs: HDA PCM BE operations ASoC: Intel: avs: Coredump and recovery flow ASoC: Intel: avs: Prepare for firmware tracing ASoC: Intel: avs: D0ix power state support ASoC: Intel: avs: Event tracing ASoC: Intel: avs: Machine board registration ASoC: Intel: avs: PCI driver implementation ASoC: Intel: avs: Power management ASoC: Intel: avs: SKL-based platforms support ASoC: Intel: avs: APL-based platforms support Piotr Maziarz (1): ASoC: Intel: avs: Replace link_mask usage with i2s_link_mask include/sound/intel-dsp-config.h | 3 +- include/sound/soc-acpi.h | 2 + sound/soc/intel/Kconfig | 2 + sound/soc/intel/avs/Makefile | 7 +- sound/soc/intel/avs/apl.c | 250 ++++++ sound/soc/intel/avs/avs.h | 79 ++ sound/soc/intel/avs/board_selection.c | 501 +++++++++++ sound/soc/intel/avs/core.c | 631 +++++++++++++ sound/soc/intel/avs/dsp.c | 27 +- sound/soc/intel/avs/ipc.c | 253 +++++- sound/soc/intel/avs/loader.c | 84 ++ sound/soc/intel/avs/messages.c | 35 +- sound/soc/intel/avs/messages.h | 51 ++ sound/soc/intel/avs/pcm.c | 1182 +++++++++++++++++++++++++ sound/soc/intel/avs/registers.h | 8 + sound/soc/intel/avs/skl.c | 125 +++ sound/soc/intel/avs/topology.c | 14 +- sound/soc/intel/avs/trace.c | 33 + sound/soc/intel/avs/trace.h | 154 ++++ sound/soc/intel/avs/utils.c | 23 + 20 files changed, 3443 insertions(+), 21 deletions(-) create mode 100644 sound/soc/intel/avs/apl.c create mode 100644 sound/soc/intel/avs/board_selection.c create mode 100644 sound/soc/intel/avs/pcm.c create mode 100644 sound/soc/intel/avs/skl.c create mode 100644 sound/soc/intel/avs/trace.c create mode 100644 sound/soc/intel/avs/trace.h -- 2.25.1

4 31

[PATCH 0/2] ASoC: da7219: Small fixes for jack detection and removal
by Adam Thomson 31 May '22

31 May '22

This series contains 2 small fixes around the AAD part of DA7219, particularly in relation to jack pole detection on certain active headsets, and tidy up when a jack is removed. Adam Thomson (2): ASoC: da7219: Fix pole orientation detection on certain headsets ASoC: da7219: cancel AAD related work earlier for jack removal sound/soc/codecs/da7219-aad.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) -- 2.17.1

2 3

[PATCH] ASoC: da7219: Drop no-op remove function
by Uwe Kleine-König 30 May '22

30 May '22

A remove callback that just returns 0 is equivalent to no callback at all as can be seen in i2c_device_remove(). So simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> --- sound/soc/codecs/da7219.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c index c7493549a9a5..7df18a2c36b9 100644 --- a/sound/soc/codecs/da7219.c +++ b/sound/soc/codecs/da7219.c @@ -2694,11 +2694,6 @@ static int da7219_i2c_probe(struct i2c_client *i2c, return ret; } -static int da7219_i2c_remove(struct i2c_client *client) -{ - return 0; -} - static const struct i2c_device_id da7219_i2c_id[] = { { "da7219", }, { } @@ -2712,7 +2707,6 @@ static struct i2c_driver da7219_i2c_driver = { .acpi_match_table = ACPI_PTR(da7219_acpi_match), }, .probe = da7219_i2c_probe, - .remove = da7219_i2c_remove, .id_table = da7219_i2c_id, }; base-commit: 4b0986a3613c92f4ec1bdc7f60ec66fea135991f -- 2.36.1

3 4

[PATCH AUTOSEL 5.18 089/159] ASoC: tscs454: Add endianness flag in snd_soc_component_driver
by Sasha Levin 30 May '22

30 May '22

From: Charles Keepax <ckeepax(a)opensource.cirrus.com> [ Upstream commit ff69ec96b87dccb3a29edef8cec5d4fefbbc2055 ] The endianness flag is used on the CODEC side to specify an ambivalence to endian, typically because it is lost over the hardware link. This device receives audio over an I2S DAI and as such should have endianness applied. A fixup is also required to use the width directly rather than relying on the format in hw_params, now both little and big endian would be supported. It is worth noting this changes the behaviour of S24_LE to use a word length of 24 rather than 32. This would appear to be a correction since the fact S24_LE is stored as 32 bits should not be presented over the bus. Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20220504170905.332415-26-ckeepax@opensource.cirru… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/tscs454.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/tscs454.c b/sound/soc/codecs/tscs454.c index 7e1826d6f06f..32e6fa7b0a06 100644 --- a/sound/soc/codecs/tscs454.c +++ b/sound/soc/codecs/tscs454.c @@ -3120,18 +3120,17 @@ static int set_aif_sample_format(struct snd_soc_component *component, unsigned int width; int ret; - switch (format) { - case SNDRV_PCM_FORMAT_S16_LE: + switch (snd_pcm_format_width(format)) { + case 16: width = FV_WL_16; break; - case SNDRV_PCM_FORMAT_S20_3LE: + case 20: width = FV_WL_20; break; - case SNDRV_PCM_FORMAT_S24_3LE: + case 24: width = FV_WL_24; break; - case SNDRV_PCM_FORMAT_S24_LE: - case SNDRV_PCM_FORMAT_S32_LE: + case 32: width = FV_WL_32; break; default: @@ -3326,6 +3325,7 @@ static const struct snd_soc_component_driver soc_component_dev_tscs454 = { .num_dapm_routes = ARRAY_SIZE(tscs454_intercon), .controls = tscs454_snd_controls, .num_controls = ARRAY_SIZE(tscs454_snd_controls), + .endianness = 1, }; #define TSCS454_RATES SNDRV_PCM_RATE_8000_96000 -- 2.35.1

3 2

[PATCH AUTOSEL 4.9 20/24] ASoC: rt5645: Fix errorenous cleanup order
by Sasha Levin 30 May '22

30 May '22

From: Lin Ma <linma(a)zju.edu.cn> [ Upstream commit 2def44d3aec59e38d2701c568d65540783f90f2f ] There is a logic error when removing rt5645 device as the function rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and delete the &rt5645->btn_check_timer latter. However, since the timer handler rt5645_btn_check_callback() will re-queue the jack_detect_work, this cleanup order is buggy. That is, once the del_timer_sync in rt5645_i2c_remove is concurrently run with the rt5645_btn_check_callback, the canceled jack_detect_work will be rescheduled again, leading to possible use-after-free. This patch fix the issue by placing the del_timer_sync function before the cancel_delayed_work_sync. Signed-off-by: Lin Ma <linma(a)zju.edu.cn> Link: https://lore.kernel.org/r/20220516092035.28283-1-linma@zju.edu.cn Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5645.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 1ac96ef9ee20..703b26ec4e15 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3878,6 +3878,12 @@ static int rt5645_i2c_remove(struct i2c_client *i2c) if (i2c->irq) free_irq(i2c->irq, rt5645); + /* + * Since the rt5645_btn_check_callback() can queue jack_detect_work, + * the timer need to be delted first + */ + del_timer_sync(&rt5645->btn_check_timer); + cancel_delayed_work_sync(&rt5645->jack_detect_work); cancel_delayed_work_sync(&rt5645->rcclock_work); -- 2.35.1

1 0