- Alsa-devel - mailman.alsa-project.org

[PATCH 0/3] ASoC: dt-bindings: Add bindings for WCD9335 DAIs
by Yassine Oudjana 22 Jun '22

22 Jun '22

Add DT bindings for WCD9335 DAIs and use them in the driver as well as all device trees currently using WCD9335. Yassine Oudjana (3): ASoC: dt-bindings: Add bindings for WCD9335 DAIs ASoC: wcd9335: Use DT bindings instead of local DAI definitions arm64: dts: qcom: Use WCD9335 DT bindings MAINTAINERS | 1 + arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 5 +++-- .../arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 5 +++-- .../boot/dts/qcom/msm8996-xiaomi-scorpio.dts | 5 +++-- include/dt-bindings/sound/qcom,wcd9335.h | 15 +++++++++++++++ sound/soc/codecs/wcd9335.c | 13 ++----------- 6 files changed, 27 insertions(+), 17 deletions(-) create mode 100644 include/dt-bindings/sound/qcom,wcd9335.h -- 2.36.1

2 6

[PATCH v7 00/14] ALSA: hda: cirrus: Add initial DSP support and firmware loading
by Vitaly Rodionov 22 Jun '22

22 Jun '22

The CS35L41 Amplifier contains a DSP, capable of running firmware. The firmware can run algorithms such as Speaker Protection, to ensure that playback at high gains do not harm the speakers. Adding support for CS35L41 firmware into the CS35L41 HDA driver also allows us to support several extra features, such as hiberation and interrupts. The chain adds support in stages: - General fixes to improve generalization and code re-use inside the CS35L41 HDA driver. - Add support for interrupts into the driver, which is required for complete support of the firmware. - Refactor ASoC CS35L41 code which deals with firmware to allow for code re-use inside the CS35L41 HDA driver. - Add support for loading firmware and tuning files from file system, and creating alsa controls to control it. - Support firmware load paths for different hardware systems. - Support suspend/resume in the driver when using firmware. The firmware supports hibernation, which allows the CS35L41 to drop into a low power mode during suspend. - Support the ability to unload firmware, swap and reload the firmware. This is to allow different firmware to run during calibration. The intended use-case is to load the firmware once on boot, and the driver autmatically tries to load the firmware after it binds to the HDA driver. This behaviour can be switched off using a kconfig, if desired. changes since v6: - Fix warning by kernel test robot <lkp(a)intel.com> changes since v5: - Fix warning by kernel test robot <lkp(a)intel.com> changes since v4: - Fully remove tlv remnants from control add apis - Remove unnecessary debug - Rename variable to be more generic - Remove redundent length check from read/write control apis - Use SNDRV_CTL_ELEM_IFACE_CARD for firmware load controls - Make kcontrol add/remove synchronous - Load firmware asynchronous when loading via control - Used cached controls when reloading firmware; only delete controls when removing the driver itself - Improve kcontrol remove - Fix control write + notify - Cleanup of unnecessary code - Fix race condition when loading firmware before playback - Ensure errors are properly propogated - Fix include for Module parameters Stefan Binding (13): ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls ALSA: hda: hda_cs_dsp_ctl: Add apis to write the controls directly ALSA: hda: cs35l41: Save codec object inside component struct ALSA: hda: cs35l41: Save Subsystem ID inside CS35L41 Driver ALSA: hda: cs35l41: Support reading subsystem id from ACPI ALSA: hda: cs35l41: Support multiple load paths for firmware ALSA: hda: cs35l41: Support Speaker ID for laptops ALSA: hda: cs35l41: Support Hibernation during Suspend ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables ALSA: hda: hda_cs_dsp_ctl: Add fw id strings ALSA: hda: cs35l41: Add defaulted values into dsp bypass config sequence ALSA: hda: cs35l41: Support Firmware switching and reloading ALSA: hda: cs35l41: Add module parameter to control firmware load Vitaly Rodionov (1): ALSA: hda: cs35l41: Add initial DSP support and firmware loading MAINTAINERS | 1 + include/sound/cs35l41.h | 4 + sound/pci/hda/Kconfig | 8 + sound/pci/hda/Makefile | 2 + sound/pci/hda/cs35l41_hda.c | 902 +++++++++++++++++++++++++++++++- sound/pci/hda/cs35l41_hda.h | 39 ++ sound/pci/hda/cs35l41_hda_i2c.c | 1 + sound/pci/hda/cs35l41_hda_spi.c | 1 + sound/pci/hda/hda_component.h | 4 + sound/pci/hda/hda_cs_dsp_ctl.c | 254 +++++++++ sound/pci/hda/hda_cs_dsp_ctl.h | 39 ++ sound/pci/hda/patch_realtek.c | 27 +- 12 files changed, 1277 insertions(+), 5 deletions(-) create mode 100644 sound/pci/hda/hda_cs_dsp_ctl.c create mode 100644 sound/pci/hda/hda_cs_dsp_ctl.h -- 2.34.1

3 19

[PATCH v4 0/3] ASoC: rockchip: i2s: switch BCLK to GPIO
by Judy Hsiao 22 Jun '22

22 Jun '22

The patches series is to fix the unexpected large DC output voltage of Max98357a that burns the speakers on the rockchip platform when BCLK and SD_MODE are ON but LRCLK is OFF. Changes Since V4: -- Fix indentation in the driver. (Align parameters with the parenthesis placement.) -- Fix incorrect return type of rockchip_snd_rxctrl. Changes Since V3: -- Fix indentation in the documentation. -- Put pinctrl-1 right after pinctrl-0 in dtsi. -- Fix indentation in the driver. -- Remove unnecessary dev_dbg() in the driver. Changes Since V2: -- Add documents of i2s pinctrl-names. -- Fix dtsi syntax error. -- Include the dtsi change and the driver change in the same series. -- Ensure that driver gets both bclk_on and bclk_off states before using them. Judy Hsiao (3): ASoC: rockchip: i2s: switch BCLK to GPIO arm64: dts: rk3399: i2s: switch BCLK to GPIO ASoC: dt-bindings: rockchip: Document pinctrl-names for i2s .../bindings/sound/rockchip-i2s.yaml | 7 + .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 10 + arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++- sound/soc/rockchip/rockchip_i2s.c | 171 +++++++++++++----- 4 files changed, 165 insertions(+), 48 deletions(-) -- 2.36.1.476.g0c4daa206d-goog

3 8

[PATCH v6 00/14] ALSA: hda: cirrus: Add initial DSP support and firmware loading
by Vitaly Rodionov 22 Jun '22

22 Jun '22

The CS35L41 Amplifier contains a DSP, capable of running firmware. The firmware can run algorithms such as Speaker Protection, to ensure that playback at high gains do not harm the speakers. Adding support for CS35L41 firmware into the CS35L41 HDA driver also allows us to support several extra features, such as hiberation and interrupts. The chain adds support in stages: - General fixes to improve generalization and code re-use inside the CS35L41 HDA driver. - Add support for interrupts into the driver, which is required for complete support of the firmware. - Refactor ASoC CS35L41 code which deals with firmware to allow for code re-use inside the CS35L41 HDA driver. - Add support for loading firmware and tuning files from file system, and creating alsa controls to control it. - Support firmware load paths for different hardware systems. - Support suspend/resume in the driver when using firmware. The firmware supports hibernation, which allows the CS35L41 to drop into a low power mode during suspend. - Support the ability to unload firmware, swap and reload the firmware. This is to allow different firmware to run during calibration. The intended use-case is to load the firmware once on boot, and the driver autmatically tries to load the firmware after it binds to the HDA driver. This behaviour can be switched off using a kconfig, if desired. changes since v5: - Fix warning by kernel test robot <lkp(a)intel.com> changes since v4: - Fully remove tlv remnants from control add apis - Remove unnecessary debug - Rename variable to be more generic - Remove redundent length check from read/write control apis - Use SNDRV_CTL_ELEM_IFACE_CARD for firmware load controls - Make kcontrol add/remove synchronous - Load firmware asynchronous when loading via control - Used cached controls when reloading firmware; only delete controls when removing the driver itself - Improve kcontrol remove - Fix control write + notify - Cleanup of unnecessary code - Fix race condition when loading firmware before playback - Ensure errors are properly propogated - Fix include for Module parameters Stefan Binding (13): ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls ALSA: hda: hda_cs_dsp_ctl: Add apis to write the controls directly ALSA: hda: cs35l41: Save codec object inside component struct ALSA: hda: cs35l41: Save Subsystem ID inside CS35L41 Driver ALSA: hda: cs35l41: Support reading subsystem id from ACPI ALSA: hda: cs35l41: Support multiple load paths for firmware ALSA: hda: cs35l41: Support Speaker ID for laptops ALSA: hda: cs35l41: Support Hibernation during Suspend ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables ALSA: hda: hda_cs_dsp_ctl: Add fw id strings ALSA: hda: cs35l41: Add defaulted values into dsp bypass config sequence ALSA: hda: cs35l41: Support Firmware switching and reloading ALSA: hda: cs35l41: Add module parameter to control firmware load Vitaly Rodionov (1): ALSA: hda: cs35l41: Add initial DSP support and firmware loading MAINTAINERS | 1 + include/sound/cs35l41.h | 4 + sound/pci/hda/Kconfig | 8 + sound/pci/hda/Makefile | 2 + sound/pci/hda/cs35l41_hda.c | 902 +++++++++++++++++++++++++++++++- sound/pci/hda/cs35l41_hda.h | 39 ++ sound/pci/hda/cs35l41_hda_i2c.c | 1 + sound/pci/hda/cs35l41_hda_spi.c | 1 + sound/pci/hda/hda_component.h | 4 + sound/pci/hda/hda_cs_dsp_ctl.c | 254 +++++++++ sound/pci/hda/hda_cs_dsp_ctl.h | 39 ++ sound/pci/hda/patch_realtek.c | 27 +- 12 files changed, 1277 insertions(+), 5 deletions(-) create mode 100644 sound/pci/hda/hda_cs_dsp_ctl.c create mode 100644 sound/pci/hda/hda_cs_dsp_ctl.h -- 2.34.1

2 15

No sound on AMD audio device
by GitHub issues - edited 21 Jun '22

21 Jun '22

alsa-project/alsa-lib issue #241 was edited from chvmq: I have a laptop huawei 14 amd 2021 I don't know where write about it. maybe there I tried ubuntu | arch-linux and no sound at all ![image](https://user-images.githubusercontent.com/60788249/174885007-8eb96062-3753-47b6-9880-5a45b57071ac.png) ![image](https://user-images.githubusercontent.com/60788249/174885044-42b8c5c2-6c64-46df-ade6-6f5c8388a972.png) ![image](https://user-images.githubusercontent.com/60788249/174885077-b13fc2a4-18cb-4f20-84a7-3c611ebbecc3.png) Issue URL : https://github.com/alsa-project/alsa-lib/issues/241 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

No sound on AMD audio device
by GitHub issues - edited 21 Jun '22

21 Jun '22

alsa-project/alsa-lib issue #241 was edited from chvmq: I have a laptop huawei 14 amd 2021 I don't know where write about it. maybe there I tried ubuntu | arch-linux and no sound at all ![3dee5e90-3eaf-4c30-b11b-538282950d39](https://user-images.github ![e0a07559-3156-4cb9-8ca7-6c8087cb375e](https://user-images.githubusercontent.com/60788249/174884837-e59af122-bccf-4a82-b7a7-8f3666139c3d.png) usercontent.com/60788249/174884832-d3b8599b-8457-43df-849d-3a6fb7acda68.png) ![09f629fe-6c69-41ff-a708-b1ee7e482205](https://user-images.githubusercontent.com/60788249/174884845-12525b62-6a45-4efd-9988-3f91120495d5.png) Issue URL : https://github.com/alsa-project/alsa-lib/issues/241 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH 1/4] ASoC: wm_adsp: Fix event for preloader
by Charles Keepax 21 Jun '22

21 Jun '22

The preloader controls on ADSP should return a value of 1 if the preloader value was changed, update to correct this. Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- sound/soc/codecs/wm_adsp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 6d7fd88243aa8..a7784ac15dde6 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -997,7 +997,7 @@ int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol, snd_soc_dapm_sync(dapm); } - return 0; + return 1; } EXPORT_SYMBOL_GPL(wm_adsp2_preloader_put); -- 2.30.2

3 5

[PATCH] ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
by shumingf＠realtek.com 21 Jun '22

21 Jun '22

From: Shuming Fan <shumingf(a)realtek.com> The initial settings will be written before the codec probe function. But, the rt711->component doesn't be assigned yet. If IO error happened during initial settings operations, it will cause the kernel panic. This patch changed component->dev to slave->dev to fix this issue. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt711-sdca.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rt711-sdca.c b/sound/soc/codecs/rt711-sdca.c index 9d226b1cb7e9..925268121901 100644 --- a/sound/soc/codecs/rt711-sdca.c +++ b/sound/soc/codecs/rt711-sdca.c @@ -34,7 +34,7 @@ static int rt711_sdca_index_write(struct rt711_sdca_priv *rt711, ret = regmap_write(regmap, addr, value); if (ret < 0) - dev_err(rt711->component->dev, + dev_err(&rt711->slave->dev, "Failed to set private value: %06x <= %04x ret=%d\n", addr, value, ret); @@ -50,7 +50,7 @@ static int rt711_sdca_index_read(struct rt711_sdca_priv *rt711, ret = regmap_read(regmap, addr, value); if (ret < 0) - dev_err(rt711->component->dev, + dev_err(&rt711->slave->dev, "Failed to get private value: %06x => %04x ret=%d\n", addr, *value, ret); -- 2.36.1

2 1

[PATCH 1/4] ASoC: fsl-asoc-card: add WM8904 support
by Alifer Moraes 21 Jun '22

21 Jun '22

From: Pierluigi Passaro <pierluigi.p(a)variscite.com> The codec WM8904 can use internal FLL as PLL source. Whenever the PLL source is not an external MCLK, this source must be setup during hw_params callback otherwise the BCLK could be wrongly evaluated. The SND_SOC_BIAS_PREPARE event is raised after the hw_params callback, so there is no need to set again PLL and SYSCLK and actually there's no need at all the set_bias_level function. Also, when esai is used, a dedicated snd_soc_dai_set_tdm_slot call is required. Signed-off-by: Pierluigi Passaro <pierluigi.p(a)variscite.com> Signed-off by: Alifer Moraes <alifer.m(a)variscite.com> --- sound/soc/fsl/fsl-asoc-card.c | 47 +++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 5ee945505281..817dbc1ec635 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -23,6 +23,7 @@ #include "imx-audmux.h" #include "../codecs/sgtl5000.h" +#include "../codecs/wm8904.h" #include "../codecs/wm8962.h" #include "../codecs/wm8960.h" #include "../codecs/wm8994.h" @@ -257,6 +258,38 @@ static int fsl_asoc_card_hw_free(struct snd_pcm_substream *substream) } } + if (of_device_is_compatible(dev->of_node, "fsl,imx-audio-wm8904")) { + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + unsigned int pll_out; + + ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0, 0, 2, + params_physical_width(params)); + if (ret) { + dev_err(dev, "failed to set TDM slot for cpu dai\n"); + return ret; + } + + if (priv->sample_format == SNDRV_PCM_FORMAT_S24_LE) + pll_out = priv->sample_rate * 384; + else + pll_out = priv->sample_rate * 256; + + ret = snd_soc_dai_set_pll(codec_dai, codec_priv->pll_id, + codec_priv->pll_id, + codec_priv->mclk_freq, pll_out); + if (ret) { + dev_err(dev, "failed to start FLL: %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_sysclk(codec_dai, codec_priv->fll_id, + pll_out, SND_SOC_CLOCK_IN); + if (ret) { + dev_err(dev, "failed to set SYSCLK: %d\n", ret); + return ret; + } + } + return 0; } @@ -651,6 +684,19 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) priv->codec_priv.fll_id = WM8960_SYSCLK_AUTO; priv->codec_priv.pll_id = WM8960_SYSCLK_AUTO; priv->dai_fmt |= SND_SOC_DAIFMT_CBP_CFP; + } else if (of_device_is_compatible(np, "fsl,imx-audio-wm8904")) { + codec_dai_name = "wm8904-hifi"; + priv->card.set_bias_level = NULL; + priv->codec_priv.mclk_id = WM8904_CLK_FLL; + priv->codec_priv.fll_id = WM8904_CLK_FLL; + priv->codec_priv.pll_id = WM8904_FLL_MCLK; + priv->dai_fmt |= SND_SOC_DAIFMT_CBM_CFM; + if (strstr(cpu_np->name, "esai")) { + priv->cpu_priv.sysclk_freq[TX] = priv->codec_priv.mclk_freq; + priv->cpu_priv.sysclk_freq[RX] = priv->codec_priv.mclk_freq; + priv->cpu_priv.sysclk_dir[TX] = SND_SOC_CLOCK_OUT; + priv->cpu_priv.sysclk_dir[RX] = SND_SOC_CLOCK_OUT; + } } else if (of_device_is_compatible(np, "fsl,imx-audio-ac97")) { codec_dai_name = "ac97-hifi"; priv->dai_fmt = SND_SOC_DAIFMT_AC97; @@ -900,6 +946,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = { { .compatible = "fsl,imx-audio-tlv320aic32x4", }, { .compatible = "fsl,imx-audio-tlv320aic31xx", }, { .compatible = "fsl,imx-audio-sgtl5000", }, + { .compatible = "fsl,imx-audio-wm8904", }, { .compatible = "fsl,imx-audio-wm8962", }, { .compatible = "fsl,imx-audio-wm8960", }, { .compatible = "fsl,imx-audio-mqs", }, -- 2.25.1

4 10

Intel HDMI probe regression on IVB (and older?)
by Takashi Iwai 21 Jun '22

21 Jun '22

Hi, we've got a regression report about Intel HDMI. It seems that the recent change to skip the component binding (commit c9db8a30d9f0) throws away the devices incorrectly on IvyBridge. I guess the similar issue could happen on older chips. The bug report is found at https://bugzilla.opensuse.org/show_bug.cgi?id=1200611 Judging from the logs there, on IvyBridge, the GPU is 00:02.0 0380: 8086:0162 (rev 09) DeviceName: Onboard IGD Subsystem: 1043:84ca Flags: bus master, fast devsel, latency 0, IRQ 27 Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 while HD-audio is 00:1b.0 0403: 8086:1e20 (rev 04) Subsystem: 1043:84a8 Flags: bus master, fast devsel, latency 0, IRQ 31 Memory at f7d10000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel Unlike Haswell, IVB has no dedicated HDMI audio controller, and it's connected on HD-audio bus of 00:1b.0. Kai, could you check this issue? thanks, Takashi

2 7