- Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: imx-card: Fix DSD/PDM mclk frequency
by Shengjiu Wang 06 Jul '22

06 Jul '22

The DSD/PDM rate not only DSD64/128/256/512, which are the multiple rate of 44.1kHz, but also support the multiple rate of 8kHz, so can't force all mclk frequency to be 22579200Hz, need to assign the frequency according to rate. Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver") Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/imx-card.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/sound/soc/fsl/imx-card.c b/sound/soc/fsl/imx-card.c index 1797d777b1b8..ccc4194dc5e7 100644 --- a/sound/soc/fsl/imx-card.c +++ b/sound/soc/fsl/imx-card.c @@ -17,6 +17,9 @@ #include "fsl_sai.h" +#define IMX_CARD_MCLK_22P5792MHZ 22579200 +#define IMX_CARD_MCLK_24P576MHZ 24576000 + enum codec_type { CODEC_DUMMY = 0, CODEC_AK5558 = 1, @@ -353,9 +356,14 @@ static int imx_aif_hw_params(struct snd_pcm_substream *substream, mclk_freq = akcodec_get_mclk_rate(substream, params, slots, slot_width); else mclk_freq = params_rate(params) * slots * slot_width; - /* Use the maximum freq from DSD512 (512*44100 = 22579200) */ - if (format_is_dsd(params)) - mclk_freq = 22579200; + + if (format_is_dsd(params)) { + /* Use the maximum freq from DSD512 (512*44100 = 22579200) */ + if (!(params_rate(params) % 11025)) + mclk_freq = IMX_CARD_MCLK_22P5792MHZ; + else + mclk_freq = IMX_CARD_MCLK_24P576MHZ; + } ret = snd_soc_dai_set_sysclk(cpu_dai, link_data->cpu_sysclk_id, mclk_freq, SND_SOC_CLOCK_OUT); -- 2.17.1

2 1

[PATCH v2] add tas2780
by Raphael-Xu 06 Jul '22

06 Jul '22

1.update Kconfig and Makefile 2.add tas2780.c and tas2780.h Signed-off-by: Raphael-Xu <13691752556(a)139.com> --- sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2780.c | 693 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2780.h | 101 ++++++ 4 files changed, 804 insertions(+) create mode 100644 sound/soc/codecs/tas2780.c create mode 100644 sound/soc/codecs/tas2780.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 6165db92a629..198d7a0c10dc 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -219,6 +219,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2562 imply SND_SOC_TAS2764 imply SND_SOC_TAS2770 + imply SND_SOC_TAS2780 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1524,6 +1525,13 @@ config SND_SOC_TAS2770 tristate "Texas Instruments TAS2770 speaker amplifier" depends on I2C +config SND_SOC_TAS2780 + tristate "Texas Instruments TAS2780 Mono Audio amplifier" + depends on I2C + help + Enable support for Texas Instruments TAS2780 high-efficiency + digital input mono Class-D audio power amplifiers. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 28dc4edfd01f..14273b68a7ec 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -346,6 +346,7 @@ snd-soc-tpa6130a2-objs := tpa6130a2.o snd-soc-tas2552-objs := tas2552.o snd-soc-tas2562-objs := tas2562.o snd-soc-tas2764-objs := tas2764.o +snd-soc-tas2780-objs := tas2780.o # Mux snd-soc-simple-mux-objs := simple-mux.o @@ -589,6 +590,7 @@ obj-$(CONFIG_SND_SOC_STI_SAS) += snd-soc-sti-sas.o obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o +obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2780.c b/sound/soc/codecs/tas2780.c new file mode 100644 index 000000000000..e6923c791b49 --- /dev/null +++ b/sound/soc/codecs/tas2780.c @@ -0,0 +1,693 @@ +// SPDX-License-Identifier: GPL-2.0 +// Driver for the Texas Instruments TAS2780 Mono +// Audio amplifier +// Copyright (C) 2022 Texas Instruments Inc. + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/regmap.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <sound/soc.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "tas2780.h" + +struct tas2780_priv { + struct snd_soc_component *component; + struct gpio_desc *reset_gpio; + struct regmap *regmap; + struct device *dev; + int v_sense_slot; + int i_sense_slot; +}; + +static void tas2780_reset(struct tas2780_priv *tas2780) +{ + int ret = 0; + + if (tas2780->reset_gpio) { + gpiod_set_value_cansleep(tas2780->reset_gpio, 0); + usleep_range(2000, 2050); + gpiod_set_value_cansleep(tas2780->reset_gpio, 1); + usleep_range(2000, 2050); + } + + snd_soc_component_write(tas2780->component, TAS2780_SW_RST, + TAS2780_RST); + if (ret) { + dev_err(tas2780->dev, + "%s:errCode:0x%x Reset error!\n", + __func__, ret); + } +} + +#ifdef CONFIG_PM +static int tas2780_codec_suspend(struct snd_soc_component *component) +{ + struct tas2780_priv *tas2780 = + snd_soc_component_get_drvdata(component); + int ret = 0; + + ret = snd_soc_component_update_bits(component, TAS2780_PWR_CTRL, + TAS2780_PWR_CTRL_MASK, TAS2780_PWR_CTRL_SHUTDOWN); + if (ret < 0) { + dev_err(tas2780->dev, "%s:errCode:0x%0x:power down error\n", + __func__, ret); + goto err; + } + ret = 0; + + regcache_cache_only(tas2780->regmap, true); + regcache_mark_dirty(tas2780->regmap); +err: + return ret; +} + +static int tas2780_codec_resume(struct snd_soc_component *component) +{ + struct tas2780_priv *tas2780 = + snd_soc_component_get_drvdata(component); + int ret = 0; + + ret = snd_soc_component_update_bits(component, TAS2780_PWR_CTRL, + TAS2780_PWR_CTRL_MASK, TAS2780_PWR_CTRL_ACTIVE); + + if (ret < 0) { + dev_err(tas2780->dev, "%s:errCode:0x%0x:power down error\n", + __func__, ret); + goto err; + } + ret = 0; + regcache_cache_only(tas2780->regmap, false); + ret = regcache_sync(tas2780->regmap); +err: + return ret; +} +#endif + +static const char * const tas2780_ASI1_src[] = { + "I2C offset", "Left", "Right", "LeftRightDiv2", +}; + +static SOC_ENUM_SINGLE_DECL( + tas2780_ASI1_src_enum, TAS2780_TDM_CFG2, 4, tas2780_ASI1_src); + +static const struct snd_kcontrol_new tas2780_asi1_mux = + SOC_DAPM_ENUM("ASI1 Source", tas2780_ASI1_src_enum); + +static int tas2780_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct tas2780_priv *tas2780 = + snd_soc_component_get_drvdata(component); + int ret = 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + ret = snd_soc_component_update_bits(component, + TAS2780_CLK_CFG, TAS2780_CLK_CFG_MASK, + TAS2780_CLK_CFG_ENABLE); + break; + default: + dev_err(tas2780->dev, "Unsupported event\n"); + ret = -EINVAL; + } + if (ret < 0) { + dev_err(tas2780->dev, "%s:errCode:0x%0x\n", + __func__, ret); + } else { + ret = 0; + } + + return ret; +} + +static const struct snd_kcontrol_new isense_switch = + SOC_DAPM_SINGLE("Switch", TAS2780_PWR_CTRL, + TAS2780_ISENSE_POWER_EN, 1, 1); +static const struct snd_kcontrol_new vsense_switch = + SOC_DAPM_SINGLE("Switch", TAS2780_PWR_CTRL, + TAS2780_VSENSE_POWER_EN, 1, 1); + +static const struct snd_soc_dapm_widget tas2780_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI1", "ASI1 Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_MUX("ASI1 Sel", SND_SOC_NOPM, 0, 0, &tas2780_asi1_mux), + SND_SOC_DAPM_SWITCH("ISENSE", TAS2780_PWR_CTRL, + TAS2780_ISENSE_POWER_EN, 1, &isense_switch), + SND_SOC_DAPM_SWITCH("VSENSE", TAS2780_PWR_CTRL, + TAS2780_VSENSE_POWER_EN, 1, &vsense_switch), + SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas2780_dac_event, + SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_SIGGEN("VMON"), + SND_SOC_DAPM_SIGGEN("IMON") +}; + +static const struct snd_soc_dapm_route tas2780_audio_map[] = { + {"ASI1 Sel", "I2C offset", "ASI1"}, + {"ASI1 Sel", "Left", "ASI1"}, + {"ASI1 Sel", "Right", "ASI1"}, + {"ASI1 Sel", "LeftRightDiv2", "ASI1"}, + {"DAC", NULL, "ASI1 Sel"}, + {"OUT", NULL, "DAC"}, + {"ISENSE", "Switch", "IMON"}, + {"VSENSE", "Switch", "VMON"}, +}; + +static int tas2780_mute(struct snd_soc_dai *dai, int mute, int direction) +{ + struct snd_soc_component *component = dai->component; + struct tas2780_priv *tas2780 = + snd_soc_component_get_drvdata(component); + int ret = 0; + + ret = snd_soc_component_update_bits(component, TAS2780_PWR_CTRL, + TAS2780_PWR_CTRL_MASK, + mute ? TAS2780_PWR_CTRL_MUTE : 0); + if (ret < 0) { + dev_err(tas2780->dev, "%s: Failed to set powercontrol\n", + __func__); + goto err; + } + ret = 0; +err: + return ret; +} + +static int tas2780_set_bitwidth(struct tas2780_priv *tas2780, int bitwidth) +{ + struct snd_soc_component *component = tas2780->component; + int sense_en; + int val; + int ret; + int slot_size; + + switch (bitwidth) { + case SNDRV_PCM_FORMAT_S16_LE: + ret = snd_soc_component_update_bits(component, + TAS2780_TDM_CFG2, + TAS2780_TDM_CFG2_RXW_MASK, + TAS2780_TDM_CFG2_RXW_16BITS); + slot_size = TAS2780_TDM_CFG2_RXS_16BITS; + break; + case SNDRV_PCM_FORMAT_S24_LE: + ret = snd_soc_component_update_bits(component, + TAS2780_TDM_CFG2, + TAS2780_TDM_CFG2_RXW_MASK, + TAS2780_TDM_CFG2_RXW_24BITS); + slot_size = TAS2780_TDM_CFG2_RXS_24BITS; + break; + case SNDRV_PCM_FORMAT_S32_LE: + ret = snd_soc_component_update_bits(component, + TAS2780_TDM_CFG2, + TAS2780_TDM_CFG2_RXW_MASK, + TAS2780_TDM_CFG2_RXW_32BITS); + slot_size = TAS2780_TDM_CFG2_RXS_32BITS; + break; + + default: + ret = -EINVAL; + } + + if (ret < 0) { + dev_err(tas2780->dev, "%s:errCode:0x%x set bitwidth error\n", + __func__, ret); + goto err; + } + + ret = snd_soc_component_update_bits(component, TAS2780_TDM_CFG2, + TAS2780_TDM_CFG2_RXS_MASK, slot_size); + if (ret < 0) { + dev_err(tas2780->dev, + "%s:errCode:0x%x set RX slot size error\n", + __func__, ret); + goto err; + } + + val = snd_soc_component_read(tas2780->component, TAS2780_PWR_CTRL); + if (val < 0) { + dev_err(tas2780->dev, "%s:errCode:0x%x read PWR_CTRL error\n", + __func__, val); + ret = val; + goto err; + } + + if (val & (1 << TAS2780_VSENSE_POWER_EN)) + sense_en = 0; + else + sense_en = TAS2780_TDM_CFG5_VSNS_ENABLE; + + ret = snd_soc_component_update_bits(tas2780->component, + TAS2780_TDM_CFG5, TAS2780_TDM_CFG5_VSNS_ENABLE, sense_en); + if (ret < 0) { + dev_err(tas2780->dev, "%s:errCode:0x%x enable vSNS error\n", + __func__, ret); + goto err; + } + + if (val & (1 << TAS2780_ISENSE_POWER_EN)) + sense_en = 0; + else + sense_en = TAS2780_TDM_CFG6_ISNS_ENABLE; + + ret = snd_soc_component_update_bits(tas2780->component, + TAS2780_TDM_CFG6, TAS2780_TDM_CFG6_ISNS_ENABLE, sense_en); + if (ret < 0) { + dev_err(tas2780->dev, "%s:errCode:0x%x enable iSNS error\n", + __func__, ret); + } + ret = 0; +err: + return ret; +} + +static int tas2780_set_samplerate( + struct tas2780_priv *tas2780, int samplerate) +{ + struct snd_soc_component *component = tas2780->component; + int ramp_rate_val; + int ret; + + switch (samplerate) { + case 48000: + ramp_rate_val = TAS2780_TDM_CFG0_SMP_48KHZ | + TAS2780_TDM_CFG0_44_1_48KHZ; + break; + case 44100: + ramp_rate_val = TAS2780_TDM_CFG0_SMP_44_1KHZ | + TAS2780_TDM_CFG0_44_1_48KHZ; + break; + case 96000: + ramp_rate_val = TAS2780_TDM_CFG0_SMP_48KHZ | + TAS2780_TDM_CFG0_88_2_96KHZ; + break; + case 88200: + ramp_rate_val = TAS2780_TDM_CFG0_SMP_44_1KHZ | + TAS2780_TDM_CFG0_88_2_96KHZ; + break; + default: + return -EINVAL; + } + ret = snd_soc_component_update_bits(component, TAS2780_TDM_CFG0, + TAS2780_TDM_CFG0_SMP_MASK | TAS2780_TDM_CFG0_MASK, + ramp_rate_val); + if (ret < 0) { + dev_err(tas2780->dev, + "%s:errCode:0x%x Failed to set ramp_rate_val\n", + __func__, ret); + goto err; + } + ret = 0; +err: + return ret; +} + +static int tas2780_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tas2780_priv *tas2780 = + snd_soc_component_get_drvdata(component); + int ret; + + ret = tas2780_set_bitwidth(tas2780, params_format(params)); + if (ret < 0) + return ret; + + return tas2780_set_samplerate(tas2780, params_rate(params)); +} + +static int tas2780_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct tas2780_priv *tas2780 = + snd_soc_component_get_drvdata(component); + u8 tdm_rx_start_slot = 0, asi_cfg_1 = 0; + int iface; + int ret = 0; + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + asi_cfg_1 = TAS2780_TDM_CFG1_RX_RISING; + break; + case SND_SOC_DAIFMT_IB_NF: + asi_cfg_1 = TAS2780_TDM_CFG1_RX_FALLING; + break; + default: + dev_err(tas2780->dev, "ASI format Inverse is not found\n"); + return -EINVAL; + } + + ret = snd_soc_component_update_bits(component, TAS2780_TDM_CFG1, + TAS2780_TDM_CFG1_RX_MASK, asi_cfg_1); + if (ret < 0) { + dev_err(tas2780->dev, + "%s:errCode:0x%x Failed to set asi_cfg_1\n", + __func__, ret); + goto err; + } + + if (((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) + || ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) + == SND_SOC_DAIFMT_DSP_A)){ + iface = TAS2780_TDM_CFG2_SCFG_I2S; + tdm_rx_start_slot = 1; + } else { + if (((fmt & SND_SOC_DAIFMT_FORMAT_MASK) + == SND_SOC_DAIFMT_DSP_B) + || ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) + == SND_SOC_DAIFMT_LEFT_J)) { + iface = TAS2780_TDM_CFG2_SCFG_LEFT_J; + tdm_rx_start_slot = 0; + } else { + dev_err(tas2780->dev, + "%s:DAI Format is not found, fmt=0x%x\n", + __func__, fmt); + ret = -EINVAL; + goto err; + } + } + ret = snd_soc_component_update_bits(component, TAS2780_TDM_CFG1, + TAS2780_TDM_CFG1_MASK, + (tdm_rx_start_slot << TAS2780_TDM_CFG1_51_SHIFT)); + if (ret < 0) { + dev_err(tas2780->dev, + "%s:errCode:0x%x Failed to set tdm_rx_start_slot\n", + __func__, ret); + goto err; + } + + ret = snd_soc_component_update_bits(component, TAS2780_TDM_CFG2, + TAS2780_TDM_CFG2_SCFG_MASK, iface); + if (ret < 0) { + dev_err(tas2780->dev, "%s:errCode:0x%x Failed to set iface\n", + __func__, ret); + goto err; + } + ret = 0; +err: + return ret; +} + +static int tas2780_set_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, + unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct tas2780_priv *tas2780 = + snd_soc_component_get_drvdata(component); + int left_slot, right_slot; + int slots_cfg; + int slot_size; + int ret = 0; + + if (tx_mask == 0 || rx_mask != 0) + return -EINVAL; + + if (slots == 1) { + if (tx_mask != 1) + return -EINVAL; + left_slot = 0; + right_slot = 0; + } else { + left_slot = __ffs(tx_mask); + tx_mask &= ~(1 << left_slot); + if (tx_mask == 0) { + right_slot = left_slot; + } else { + right_slot = __ffs(tx_mask); + tx_mask &= ~(1 << right_slot); + } + } + + if (tx_mask != 0 || left_slot >= slots || right_slot >= slots) + return -EINVAL; + + slots_cfg = (right_slot << TAS2780_TDM_CFG3_RXS_SHIFT) | left_slot; + ret = snd_soc_component_write(component, TAS2780_TDM_CFG3, slots_cfg); + if (ret) { + dev_err(tas2780->dev, + "%s:errCode:0x%x Failed to set slots_cfg\n", + __func__, ret); + goto err; + } + + switch (slot_width) { + case 16: + slot_size = TAS2780_TDM_CFG2_RXS_16BITS; + break; + case 24: + slot_size = TAS2780_TDM_CFG2_RXS_24BITS; + break; + case 32: + slot_size = TAS2780_TDM_CFG2_RXS_32BITS; + break; + default: + ret = -EINVAL; + goto err; + } + + ret = snd_soc_component_update_bits(component, TAS2780_TDM_CFG2, + TAS2780_TDM_CFG2_RXS_MASK, slot_size); + if (ret < 0) { + dev_err(tas2780->dev, + "%s:errCode:0x%x Failed to set slot_size\n", + __func__, ret); + goto err; + } + + ret = snd_soc_component_update_bits(component, TAS2780_TDM_CFG5, + TAS2780_TDM_CFG5_50_MASK, tas2780->v_sense_slot); + if (ret < 0) { + dev_err(tas2780->dev, + "%s:errCode:0x%x Failed to set v_sense_slot\n", + __func__, ret); + goto err; + } + + ret = snd_soc_component_update_bits(component, TAS2780_TDM_CFG6, + TAS2780_TDM_CFG6_50_MASK, tas2780->i_sense_slot); + if (ret < 0) { + dev_err(tas2780->dev, + "%s:errCode:0x%x Failed to set i_sense_slot\n", + __func__, ret); + goto err; + } + ret = 0; +err: + return ret; +} + +static const struct snd_soc_dai_ops tas2780_dai_ops = { + .mute_stream = tas2780_mute, + .hw_params = tas2780_hw_params, + .set_fmt = tas2780_set_fmt, + .set_tdm_slot = tas2780_set_dai_tdm_slot, + .no_capture_mute = 1, +}; + +#define TAS2780_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +#define TAS2780_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_88200) + +static struct snd_soc_dai_driver tas2780_dai_driver[] = { + { + .name = "tas2780 ASI1", + .id = 0, + .playback = { + .stream_name = "ASI1 Playback", + .channels_min = 2, + .channels_max = 2, + .rates = TAS2780_RATES, + .formats = TAS2780_FORMATS, + }, + .capture = { + .stream_name = "ASI1 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = TAS2780_RATES, + .formats = TAS2780_FORMATS, + }, + .ops = &tas2780_dai_ops, + .symmetric_rate = 1, + }, +}; + +static int tas2780_codec_probe(struct snd_soc_component *component) +{ + struct tas2780_priv *tas2780 = + snd_soc_component_get_drvdata(component); + + tas2780->component = component; + + tas2780_reset(tas2780); + + return 0; +} + +static DECLARE_TLV_DB_SCALE(tas2780_digital_tlv, 1100, 50, 0); +static DECLARE_TLV_DB_SCALE(tas2780_playback_volume, -10000, 50, 0); + +static const struct snd_kcontrol_new tas2780_snd_controls[] = { + SOC_SINGLE_TLV("Speaker Volume", TAS2780_DVC, 0, + TAS2780_DVC_MAX, 1, tas2780_playback_volume), + SOC_SINGLE_TLV("Amp Gain Volume", TAS2780_CHNL_0, 0, 0x14, 0, + tas2780_digital_tlv), +}; + +static const struct snd_soc_component_driver soc_component_driver_tas2780 = { + .probe = tas2780_codec_probe, +#ifdef CONFIG_PM + .suspend = tas2780_codec_suspend, + .resume = tas2780_codec_resume, +#endif + .controls = tas2780_snd_controls, + .num_controls = ARRAY_SIZE(tas2780_snd_controls), + .dapm_widgets = tas2780_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tas2780_dapm_widgets), + .dapm_routes = tas2780_audio_map, + .num_dapm_routes = ARRAY_SIZE(tas2780_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static const struct reg_default tas2780_reg_defaults[] = { + { TAS2780_PAGE, 0x00 }, + { TAS2780_SW_RST, 0x00 }, + { TAS2780_PWR_CTRL, 0x1a }, + { TAS2780_DVC, 0x00 }, + { TAS2780_CHNL_0, 0x00 }, + { TAS2780_TDM_CFG0, 0x09 }, + { TAS2780_TDM_CFG1, 0x02 }, + { TAS2780_TDM_CFG2, 0x0a }, + { TAS2780_TDM_CFG3, 0x10 }, + { TAS2780_TDM_CFG5, 0x42 }, +}; + +static const struct regmap_range_cfg tas2780_regmap_ranges[] = { + { + .range_min = 0, + .range_max = 1 * 128, + .selector_reg = TAS2780_PAGE, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 128, + }, +}; + +static const struct regmap_config tas2780_i2c_regmap = { + .reg_bits = 8, + .val_bits = 8, + .reg_defaults = tas2780_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas2780_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .ranges = tas2780_regmap_ranges, + .num_ranges = ARRAY_SIZE(tas2780_regmap_ranges), + .max_register = 1 * 128, +}; + +static int tas2780_parse_dt(struct device *dev, struct tas2780_priv *tas2780) +{ + int ret = 0; + + tas2780->reset_gpio = devm_gpiod_get_optional(tas2780->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(tas2780->reset_gpio)) { + if (PTR_ERR(tas2780->reset_gpio) == -EPROBE_DEFER) { + tas2780->reset_gpio = NULL; + return -EPROBE_DEFER; + } + } + + ret = fwnode_property_read_u32(dev->fwnode, "ti,imon-slot-no", + &tas2780->i_sense_slot); + if (ret) + tas2780->i_sense_slot = 0; + + ret = fwnode_property_read_u32(dev->fwnode, "ti,vmon-slot-no", + &tas2780->v_sense_slot); + if (ret) + tas2780->v_sense_slot = 2; + + return 0; +} + +static int tas2780_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tas2780_priv *tas2780; + int result; + + tas2780 = devm_kzalloc(&client->dev, sizeof(struct tas2780_priv), + GFP_KERNEL); + if (!tas2780) + return -ENOMEM; + tas2780->dev = &client->dev; + i2c_set_clientdata(client, tas2780); + dev_set_drvdata(&client->dev, tas2780); + + tas2780->regmap = devm_regmap_init_i2c(client, &tas2780_i2c_regmap); + if (IS_ERR(tas2780->regmap)) { + result = PTR_ERR(tas2780->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + result); + return result; + } + + if (client->dev.of_node) { + result = tas2780_parse_dt(&client->dev, tas2780); + if (result) { + dev_err(tas2780->dev, + "%s: Failed to parse devicetree\n", __func__); + return result; + } + } + + return devm_snd_soc_register_component(tas2780->dev, + &soc_component_driver_tas2780, tas2780_dai_driver, + ARRAY_SIZE(tas2780_dai_driver)); +} + +static const struct i2c_device_id tas2780_i2c_id[] = { + { "tas2780", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas2780_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id tas2780_of_match[] = { + { .compatible = "ti,tas2780" }, + {}, +}; +MODULE_DEVICE_TABLE(of, tas2780_of_match); +#endif + +static struct i2c_driver tas2780_i2c_driver = { + .driver = { + .name = "tas2780", + .of_match_table = of_match_ptr(tas2780_of_match), + }, + .probe = tas2780_i2c_probe, + .id_table = tas2780_i2c_id, +}; +module_i2c_driver(tas2780_i2c_driver); + +MODULE_AUTHOR("Raphael Xu <raphael-xu(a)ti.com>"); +MODULE_DESCRIPTION("TAS2780 I2C Smart Amplifier driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2780.h b/sound/soc/codecs/tas2780.h new file mode 100644 index 000000000000..470ae24facd6 --- /dev/null +++ b/sound/soc/codecs/tas2780.h @@ -0,0 +1,101 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * TAS2780.h - ALSA SoC Texas Instruments TAS2780 Mono Audio Amplifier + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com + * + * Author: Raphael Xu <raphael-xu(a)ti.com> + */ + +#ifndef __TAS2780_H__ +#define __TAS2780_H__ + +/* Book Control Register */ +#define TAS2780_BOOKCTL_PAGE 0 +#define TAS2780_BOOKCTL_REG 127 +#define TAS2780_REG(page, reg) ((page * 128) + reg) + +/* Page */ +#define TAS2780_PAGE TAS2780_REG(0X0, 0x00) +#define TAS2780_PAGE_PAGE_MASK 255 + +/* Software Reset */ +#define TAS2780_SW_RST TAS2780_REG(0X0, 0x01) +#define TAS2780_RST BIT(0) + +/* Power Control */ +#define TAS2780_PWR_CTRL TAS2780_REG(0X0, 0x02) +#define TAS2780_PWR_CTRL_MASK GENMASK(1, 0) +#define TAS2780_PWR_CTRL_ACTIVE 0x0 +#define TAS2780_PWR_CTRL_MUTE BIT(0) +#define TAS2780_PWR_CTRL_SHUTDOWN BIT(1) + +#define TAS2780_VSENSE_POWER_EN 3 +#define TAS2780_ISENSE_POWER_EN 4 + +/* Digital Volume Control */ +#define TAS2780_DVC TAS2780_REG(0X0, 0x1a) +#define TAS2780_DVC_MAX 0xc9 + +#define TAS2780_CHNL_0 TAS2780_REG(0X0, 0x03) + +/* TDM Configuration Reg0 */ +#define TAS2780_TDM_CFG0 TAS2780_REG(0X0, 0x08) +#define TAS2780_TDM_CFG0_SMP_MASK BIT(5) +#define TAS2780_TDM_CFG0_SMP_48KHZ 0x0 +#define TAS2780_TDM_CFG0_SMP_44_1KHZ BIT(5) +#define TAS2780_TDM_CFG0_MASK GENMASK(3, 1) +#define TAS2780_TDM_CFG0_44_1_48KHZ BIT(3) +#define TAS2780_TDM_CFG0_88_2_96KHZ (BIT(3) | BIT(1)) + +/* TDM Configuration Reg1 */ +#define TAS2780_TDM_CFG1 TAS2780_REG(0X0, 0x09) +#define TAS2780_TDM_CFG1_MASK GENMASK(5, 1) +#define TAS2780_TDM_CFG1_51_SHIFT 1 +#define TAS2780_TDM_CFG1_RX_MASK BIT(0) +#define TAS2780_TDM_CFG1_RX_RISING 0x0 +#define TAS2780_TDM_CFG1_RX_FALLING BIT(0) + +/* TDM Configuration Reg2 */ +#define TAS2780_TDM_CFG2 TAS2780_REG(0X0, 0x0a) +#define TAS2780_TDM_CFG2_RXW_MASK GENMASK(3, 2) +#define TAS2780_TDM_CFG2_RXW_16BITS 0x0 +#define TAS2780_TDM_CFG2_RXW_24BITS BIT(3) +#define TAS2780_TDM_CFG2_RXW_32BITS (BIT(3) | BIT(2)) +#define TAS2780_TDM_CFG2_RXS_MASK GENMASK(1, 0) +#define TAS2780_TDM_CFG2_RXS_16BITS 0x0 +#define TAS2780_TDM_CFG2_RXS_24BITS BIT(0) +#define TAS2780_TDM_CFG2_RXS_32BITS BIT(1) +#define TAS2780_TDM_CFG2_SCFG_MASK GENMASK(5, 4) +#define TAS2780_TDM_CFG2_SCFG_I2S 0x0 +#define TAS2780_TDM_CFG2_SCFG_LEFT_J BIT(4) +#define TAS2780_TDM_CFG2_SCFG_RIGHT_J BIT(5) + +/* TDM Configuration Reg3 */ +#define TAS2780_TDM_CFG3 TAS2780_REG(0X0, 0x0c) +#define TAS2780_TDM_CFG3_RXS_MASK GENMASK(7, 4) +#define TAS2780_TDM_CFG3_RXS_SHIFT 0x4 +#define TAS2780_TDM_CFG3_MASK GENMASK(3, 0) + +/* TDM Configuration Reg4 */ +#define TAS2780_TDM_CFG4 TAS2780_REG(0X0, 0x0d) +#define TAS2780_TDM_CFG4_TX_OFFSET_MASK GENMASK(3, 1) + +/* TDM Configuration Reg5 */ +#define TAS2780_TDM_CFG5 TAS2780_REG(0X0, 0x0e) +#define TAS2780_TDM_CFG5_VSNS_MASK BIT(6) +#define TAS2780_TDM_CFG5_VSNS_ENABLE BIT(6) +#define TAS2780_TDM_CFG5_50_MASK GENMASK(5, 0) + +/* TDM Configuration Reg6 */ +#define TAS2780_TDM_CFG6 TAS2780_REG(0X0, 0x0f) +#define TAS2780_TDM_CFG6_ISNS_MASK BIT(6) +#define TAS2780_TDM_CFG6_ISNS_ENABLE BIT(6) +#define TAS2780_TDM_CFG6_50_MASK GENMASK(5, 0) + +/* INT&CLK CFG */ +#define TAS2780_CLK_CFG TAS2780_REG(0X0, 0x5c) +#define TAS2780_CLK_CFG_MASK GENMASK(7, 6) +#define TAS2780_CLK_CFG_ENABLE (BIT(7) | BIT(6)) + +#endif /* __TAS2780_H__ */ -- 2.35.1

3 2

[PATCH v2 1/1] ASoC: madera: Replace kernel.h with the necessary inclusions
by Andy Shevchenko 06 Jul '22

06 Jul '22

When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Reviewed-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- v2: added tag (Richard), Cc'ed ASoC maintainers include/sound/madera-pdata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/sound/madera-pdata.h b/include/sound/madera-pdata.h index e3060f48f108..58398d80c3de 100644 --- a/include/sound/madera-pdata.h +++ b/include/sound/madera-pdata.h @@ -9,7 +9,7 @@ #ifndef MADERA_CODEC_PDATA_H #define MADERA_CODEC_PDATA_H -#include <linux/kernel.h> +#include <linux/types.h> #define MADERA_MAX_INPUT 6 #define MADERA_MAX_MUXED_CHANNELS 4 -- 2.35.1

2 1

[PATCH v3] ASoC: dt-bindings: qcom,sm8250: add SDM845 sound
by Krzysztof Kozlowski 06 Jul '22

06 Jul '22

The Qualcomm SDM845 sound card bindings are almost the same as SM8250, except "pin-switches" and "widgets" properties. These were not documented in SDM845 text bindings but are actually valid for SDM845. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Reviewed-by: Stephan Gerhold <stephan(a)gerhold.net> --- Changes since v2: 1. Add missing Lenovo and db845c compatibles (Stephan). Changes since v1: 1. Integrate into SM8250 instead of creating new file (Stephan). Cc: Stephan Gerhold <stephan(a)gerhold.net> --- .../devicetree/bindings/sound/qcom,sdm845.txt | 91 ------------------- .../bindings/sound/qcom,sm8250.yaml | 3 + 2 files changed, 3 insertions(+), 91 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,sdm845.txt diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt deleted file mode 100644 index de4c604641da..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt +++ /dev/null @@ -1,91 +0,0 @@ -* Qualcomm Technologies Inc. SDM845 ASoC sound card driver - -This binding describes the SDM845 sound card, which uses qdsp for audio. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be one of this - "qcom,sdm845-sndcard" - "qcom,db845c-sndcard" - "lenovo,yoga-c630-sndcard" - -- audio-routing: - Usage: Optional - Value type: <stringlist> - Definition: A list of the connections between audio components. - Each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source. Valid names could be power supplies, MicBias - of codec and the jacks on the board. - -- model: - Usage: required - Value type: <stringlist> - Definition: The user-visible name of this sound card. - -- aux-devs - Usage: optional - Value type: <array of phandles> - Definition: A list of phandles for auxiliary devices (e.g. analog - amplifiers) that do not appear directly within the DAI - links. Should be connected to another audio component - using "audio-routing". - -= dailinks -Each subnode of sndcard represents either a dailink, and subnodes of each -dailinks would be cpu/codec/platform dais. - -- link-name: - Usage: required - Value type: <string> - Definition: User friendly name for dai link - -= CPU, PLATFORM, CODEC dais subnodes -- cpu: - Usage: required - Value type: <subnode> - Definition: cpu dai sub-node - -- codec: - Usage: required - Value type: <subnode> - Definition: codec dai sub-node - -- platform: - Usage: Optional - Value type: <subnode> - Definition: platform dai sub-node - -- sound-dai: - Usage: required - Value type: <phandle> - Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node. - -Example: - -audio { - compatible = "qcom,sdm845-sndcard"; - model = "sdm845-snd-card"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pri_mi2s_active &pri_mi2s_ws_active>; - pinctrl-1 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep>; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - pri-mi2s-dai-link { - link-name = "PRI MI2S Playback"; - cpu { - sound-dai = <&q6afedai PRIMARY_MI2S_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 4ecd4080bb96..e6e27d09783e 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -16,8 +16,11 @@ description: properties: compatible: enum: + - lenovo,yoga-c630-sndcard - qcom,apq8016-sbc-sndcard + - qcom,db845c-sndcard - qcom,msm8916-qdsp6-sndcard + - qcom,sdm845-sndcard - qcom,sm8250-sndcard - qcom,qrb5165-rb5-sndcard -- 2.34.1

2 1

[PATCH v2 1/2] ASoC: SOF: Intel: bdw: remove duplicating driver data retrieval
by Andy Shevchenko 06 Jul '22

06 Jul '22

device_get_match_data() in ACPI case calls similar to acpi_match_device(). Hence there is no need to duplicate the call. Just assign what is in the id->driver_data. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- v2: moved desc assignment closer to its user (Péter) sound/soc/sof/intel/bdw.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/sound/soc/sof/intel/bdw.c b/sound/soc/sof/intel/bdw.c index 26df780c702e..a446154f2803 100644 --- a/sound/soc/sof/intel/bdw.c +++ b/sound/soc/sof/intel/bdw.c @@ -681,11 +681,8 @@ static int sof_broadwell_probe(struct platform_device *pdev) return -ENODEV; } - desc = device_get_match_data(dev); - if (!desc) - return -ENODEV; - - return sof_acpi_probe(pdev, device_get_match_data(dev)); + desc = (const struct sof_dev_desc *)id->driver_data; + return sof_acpi_probe(pdev, desc); } /* acpi_driver definition */ -- 2.35.1

3 4

[PATCH v3 1/1] ASoC: Intel: catpt: remove duplicating driver data retrieval
by Andy Shevchenko 06 Jul '22

06 Jul '22

device_get_match_data() in ACPI case calls similar to acpi_match_device(). Hence there is no need to duplicate the call. Just assign what is in the id->driver_data. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- v3: moved spec assignment closer to its user (Péter, Czarek) sound/soc/intel/catpt/device.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/sound/soc/intel/catpt/device.c b/sound/soc/intel/catpt/device.c index 85a34e37316d..d48a71d2cf1e 100644 --- a/sound/soc/intel/catpt/device.c +++ b/sound/soc/intel/catpt/device.c @@ -254,14 +254,11 @@ static int catpt_acpi_probe(struct platform_device *pdev) return -ENODEV; } - spec = device_get_match_data(dev); - if (!spec) - return -ENODEV; - cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL); if (!cdev) return -ENOMEM; + spec = (const struct catpt_spec *)id->driver_data; catpt_dev_init(cdev, dev, spec); /* map DSP bar address */ -- 2.35.1

3 2

[PATCH 1/5] ASoC: tegra: tegra20_das: Fold header file into only user
by Uwe Kleine-König 06 Jul '22

06 Jul '22

Since commit fcff5f99742e ("ASoC: tegra: remove unnecessary includes") the header file (which at the time was named tegra_das.h) there is only the actual driver that includes it. Just move the definitions into the driver, drop the exports and remove the completely unused function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> --- sound/soc/tegra/tegra20_das.c | 110 +++++++++++++++++++++++-------- sound/soc/tegra/tegra20_das.h | 120 ---------------------------------- 2 files changed, 83 insertions(+), 147 deletions(-) delete mode 100644 sound/soc/tegra/tegra20_das.h diff --git a/sound/soc/tegra/tegra20_das.c b/sound/soc/tegra/tegra20_das.c index 69c651274c12..d2801130a986 100644 --- a/sound/soc/tegra/tegra20_das.c +++ b/sound/soc/tegra/tegra20_das.c @@ -13,10 +13,90 @@ #include <linux/regmap.h> #include <linux/slab.h> #include <sound/soc.h> -#include "tegra20_das.h" #define DRV_NAME "tegra20-das" +/* Register TEGRA20_DAS_DAP_CTRL_SEL */ +#define TEGRA20_DAS_DAP_CTRL_SEL 0x00 +#define TEGRA20_DAS_DAP_CTRL_SEL_COUNT 5 +#define TEGRA20_DAS_DAP_CTRL_SEL_STRIDE 4 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_P 31 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_S 1 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_P 30 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_S 1 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_P 29 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_S 1 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_P 0 +#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_S 5 + +/* Values for field TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL */ +#define TEGRA20_DAS_DAP_SEL_DAC1 0 +#define TEGRA20_DAS_DAP_SEL_DAC2 1 +#define TEGRA20_DAS_DAP_SEL_DAC3 2 +#define TEGRA20_DAS_DAP_SEL_DAP1 16 +#define TEGRA20_DAS_DAP_SEL_DAP2 17 +#define TEGRA20_DAS_DAP_SEL_DAP3 18 +#define TEGRA20_DAS_DAP_SEL_DAP4 19 +#define TEGRA20_DAS_DAP_SEL_DAP5 20 + +/* Register TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL */ +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL 0x40 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_COUNT 3 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_STRIDE 4 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL_P 28 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL_S 4 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL_P 24 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL_S 4 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL_P 0 +#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL_S 4 + +/* + * Values for: + * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL + * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL + * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL + */ +#define TEGRA20_DAS_DAC_SEL_DAP1 0 +#define TEGRA20_DAS_DAC_SEL_DAP2 1 +#define TEGRA20_DAS_DAC_SEL_DAP3 2 +#define TEGRA20_DAS_DAC_SEL_DAP4 3 +#define TEGRA20_DAS_DAC_SEL_DAP5 4 + +/* + * Names/IDs of the DACs/DAPs. + */ + +#define TEGRA20_DAS_DAP_ID_1 0 +#define TEGRA20_DAS_DAP_ID_2 1 +#define TEGRA20_DAS_DAP_ID_3 2 +#define TEGRA20_DAS_DAP_ID_4 3 +#define TEGRA20_DAS_DAP_ID_5 4 + +#define TEGRA20_DAS_DAC_ID_1 0 +#define TEGRA20_DAS_DAC_ID_2 1 +#define TEGRA20_DAS_DAC_ID_3 2 + +struct tegra20_das { + struct device *dev; + struct regmap *regmap; +}; + +/* + * Terminology: + * DAS: Digital audio switch (HW module controlled by this driver) + * DAP: Digital audio port (port/pins on Tegra device) + * DAC: Digital audio controller (e.g. I2S or AC97 controller elsewhere) + * + * The Tegra DAS is a mux/cross-bar which can connect each DAP to a specific + * DAC, or another DAP. When DAPs are connected, one must be the master and + * one the slave. Each DAC allows selection of a specific DAP for input, to + * cater for the case where N DAPs are connected to 1 DAC for broadcast + * output. + * + * This driver is dumb; no attempt is made to ensure that a valid routing + * configuration is programmed. + */ + static struct tegra20_das *das; static inline void tegra20_das_write(u32 reg, u32 val) @@ -32,7 +112,7 @@ static inline u32 tegra20_das_read(u32 reg) return val; } -int tegra20_das_connect_dap_to_dac(int dap, int dac) +static int tegra20_das_connect_dap_to_dac(int dap, int dac) { u32 addr; u32 reg; @@ -48,31 +128,8 @@ int tegra20_das_connect_dap_to_dac(int dap, int dac) return 0; } -EXPORT_SYMBOL_GPL(tegra20_das_connect_dap_to_dac); - -int tegra20_das_connect_dap_to_dap(int dap, int otherdap, int master, - int sdata1rx, int sdata2rx) -{ - u32 addr; - u32 reg; - - if (!das) - return -ENODEV; - - addr = TEGRA20_DAS_DAP_CTRL_SEL + - (dap * TEGRA20_DAS_DAP_CTRL_SEL_STRIDE); - reg = (otherdap << TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_P) | - (!!sdata2rx << TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_P) | - (!!sdata1rx << TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_P) | - (!!master << TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_P); - - tegra20_das_write(addr, reg); - - return 0; -} -EXPORT_SYMBOL_GPL(tegra20_das_connect_dap_to_dap); -int tegra20_das_connect_dac_to_dap(int dac, int dap) +static int tegra20_das_connect_dac_to_dap(int dac, int dap) { u32 addr; u32 reg; @@ -90,7 +147,6 @@ int tegra20_das_connect_dac_to_dap(int dac, int dap) return 0; } -EXPORT_SYMBOL_GPL(tegra20_das_connect_dac_to_dap); #define LAST_REG(name) \ (TEGRA20_DAS_##name + \ diff --git a/sound/soc/tegra/tegra20_das.h b/sound/soc/tegra/tegra20_das.h deleted file mode 100644 index 18e832ded73a..000000000000 --- a/sound/soc/tegra/tegra20_das.h +++ /dev/null @@ -1,120 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * tegra20_das.h - Definitions for Tegra20 DAS driver - * - * Author: Stephen Warren <swarren(a)nvidia.com> - * Copyright (C) 2010,2012 - NVIDIA, Inc. - */ - -#ifndef __TEGRA20_DAS_H__ -#define __TEGRA20_DAS_H__ - -/* Register TEGRA20_DAS_DAP_CTRL_SEL */ -#define TEGRA20_DAS_DAP_CTRL_SEL 0x00 -#define TEGRA20_DAS_DAP_CTRL_SEL_COUNT 5 -#define TEGRA20_DAS_DAP_CTRL_SEL_STRIDE 4 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_P 31 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_MS_SEL_S 1 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_P 30 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_S 1 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_P 29 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_S 1 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_P 0 -#define TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_S 5 - -/* Values for field TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL */ -#define TEGRA20_DAS_DAP_SEL_DAC1 0 -#define TEGRA20_DAS_DAP_SEL_DAC2 1 -#define TEGRA20_DAS_DAP_SEL_DAC3 2 -#define TEGRA20_DAS_DAP_SEL_DAP1 16 -#define TEGRA20_DAS_DAP_SEL_DAP2 17 -#define TEGRA20_DAS_DAP_SEL_DAP3 18 -#define TEGRA20_DAS_DAP_SEL_DAP4 19 -#define TEGRA20_DAS_DAP_SEL_DAP5 20 - -/* Register TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL */ -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL 0x40 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_COUNT 3 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_STRIDE 4 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL_P 28 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL_S 4 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL_P 24 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL_S 4 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL_P 0 -#define TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL_S 4 - -/* - * Values for: - * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA2_SEL - * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_SDATA1_SEL - * TEGRA20_DAS_DAC_INPUT_DATA_CLK_SEL_DAC_CLK_SEL - */ -#define TEGRA20_DAS_DAC_SEL_DAP1 0 -#define TEGRA20_DAS_DAC_SEL_DAP2 1 -#define TEGRA20_DAS_DAC_SEL_DAP3 2 -#define TEGRA20_DAS_DAC_SEL_DAP4 3 -#define TEGRA20_DAS_DAC_SEL_DAP5 4 - -/* - * Names/IDs of the DACs/DAPs. - */ - -#define TEGRA20_DAS_DAP_ID_1 0 -#define TEGRA20_DAS_DAP_ID_2 1 -#define TEGRA20_DAS_DAP_ID_3 2 -#define TEGRA20_DAS_DAP_ID_4 3 -#define TEGRA20_DAS_DAP_ID_5 4 - -#define TEGRA20_DAS_DAC_ID_1 0 -#define TEGRA20_DAS_DAC_ID_2 1 -#define TEGRA20_DAS_DAC_ID_3 2 - -struct tegra20_das { - struct device *dev; - struct regmap *regmap; -}; - -/* - * Terminology: - * DAS: Digital audio switch (HW module controlled by this driver) - * DAP: Digital audio port (port/pins on Tegra device) - * DAC: Digital audio controller (e.g. I2S or AC97 controller elsewhere) - * - * The Tegra DAS is a mux/cross-bar which can connect each DAP to a specific - * DAC, or another DAP. When DAPs are connected, one must be the master and - * one the slave. Each DAC allows selection of a specific DAP for input, to - * cater for the case where N DAPs are connected to 1 DAC for broadcast - * output. - * - * This driver is dumb; no attempt is made to ensure that a valid routing - * configuration is programmed. - */ - -/* - * Connect a DAP to a DAC - * dap_id: DAP to connect: TEGRA20_DAS_DAP_ID_* - * dac_sel: DAC to connect to: TEGRA20_DAS_DAP_SEL_DAC* - */ -extern int tegra20_das_connect_dap_to_dac(int dap, int dac); - -/* - * Connect a DAP to another DAP - * dap_id: DAP to connect: TEGRA20_DAS_DAP_ID_* - * other_dap_sel: DAP to connect to: TEGRA20_DAS_DAP_SEL_DAP* - * master: Is this DAP the master (1) or slave (0) - * sdata1rx: Is this DAP's SDATA1 pin RX (1) or TX (0) - * sdata2rx: Is this DAP's SDATA2 pin RX (1) or TX (0) - */ -extern int tegra20_das_connect_dap_to_dap(int dap, int otherdap, - int master, int sdata1rx, - int sdata2rx); - -/* - * Connect a DAC's input to a DAP - * (DAC outputs are selected by the DAP) - * dac_id: DAC ID to connect: TEGRA20_DAS_DAC_ID_* - * dap_sel: DAP to receive input from: TEGRA20_DAS_DAC_SEL_DAP* - */ -extern int tegra20_das_connect_dac_to_dap(int dac, int dap); - -#endif base-commit: f2906aa863381afb0015a9eb7fefad885d4e5a56 -- 2.36.1

2 5

[PATCH v1] FROMGIT: ASoC: rockchip: i2s: Fix error code when fail to read I2S_CLR
by Judy Hsiao 06 Jul '22

06 Jul '22

Add the error code '-EBUSY' when fail to read I2S_CLR in rockchip_snd_rxctrl() and rockchip_snd_txctrl() Fixes: 44f362c2cc6d ("ASoC: rockchip: i2s: switch BCLK to GPIO") Signed-off-by: Judy Hsiao <judyhsiao(a)chromium.org> --- sound/soc/rockchip/rockchip_i2s.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c index f783994cc16a..fd36c0bacc43 100644 --- a/sound/soc/rockchip/rockchip_i2s.c +++ b/sound/soc/rockchip/rockchip_i2s.c @@ -171,6 +171,7 @@ static int rockchip_snd_txctrl(struct rk_i2s_dev *i2s, int on) retry--; if (!retry) { dev_warn(i2s->dev, "fail to clear\n"); + ret = -EBUSY; break; } } @@ -232,6 +233,7 @@ static int rockchip_snd_rxctrl(struct rk_i2s_dev *i2s, int on) retry--; if (!retry) { dev_warn(i2s->dev, "fail to clear\n"); + ret = -EBUSY; break; } } -- 2.37.0.rc0.161.g10f37bed90-goog

4 3

[PATCH v2 0/6] Add support of two Audio PLL source
by Shengjiu Wang 06 Jul '22

06 Jul '22

i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being configured to handle 8kHz and 11kHz series audio rates. The patches implement the functionality to select at runtime the appropriate AUDIO PLL for root clock, if there is no two PLL registered, then no action taken. change in v2: - simply the logic for calling reparent function Shengjiu Wang (6): ASoC: fsl_utils: Add function to handle PLL clock source ASoC: fsl_spdif: Add support for PLL switch at runtime. ASoC: fsl_micfil: Add support for PLL switch at runtime ASoC: fsl_sai: Add support for PLL switch at runtime ASoC: dt-bindings: fsl_spdif: Add two PLL clock source ASoC: dt-bindings: fsl-sai: Add two PLL clock source .../devicetree/bindings/sound/fsl,spdif.yaml | 4 ++ .../devicetree/bindings/sound/fsl-sai.txt | 3 + sound/soc/fsl/Kconfig | 3 + sound/soc/fsl/fsl_micfil.c | 31 +++++++++ sound/soc/fsl/fsl_sai.c | 38 ++++++++++ sound/soc/fsl/fsl_sai.h | 2 + sound/soc/fsl/fsl_spdif.c | 48 +++++++++++-- sound/soc/fsl/fsl_utils.c | 69 +++++++++++++++++++ sound/soc/fsl/fsl_utils.h | 7 ++ 9 files changed, 200 insertions(+), 5 deletions(-) -- 2.17.1

3 9

[PATCH V2 0/5] I2S driver changes for Jadeite platform
by Vijendar Mukunda 06 Jul '22

06 Jul '22

Jadeite(JD) platform is Stoney APU varaint which uses I2S MICSP instance and ES8336 Codec. This patch series creates I2S platform devices for JD platform, adds I2S MICSP instance support and Machine driver support This patch set depends on: --checkpatch warnings patch --https://patchwork.kernel.org/project/alsa-devel/patch/20220627125834.481731-1-Vijendar.Mukunda@amd.com/ changes since v1: - removed hw_params() callback in machine driver and moved sysclk programming logic to startup() callback. - Modified ACPI & I2C flag depedency checks in Kconfig file Vijendar Mukunda (5): drm/amdgpu: add dmi check for jadeite platform drm/amdgpu: create I2S platform devices for Jadeite platform ASoC: amd: add I2S MICSP instance support ASoC: amd: add Machine driver for Jadeite platform ASoC: amd: enable machine driver build for Jadeite platform drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 329 ++++++++++++++++-------- sound/soc/amd/Kconfig | 13 + sound/soc/amd/Makefile | 2 + sound/soc/amd/acp-es8336.c | 324 +++++++++++++++++++++++ sound/soc/amd/acp-pcm-dma.c | 50 +++- sound/soc/amd/acp.h | 13 + 6 files changed, 620 insertions(+), 111 deletions(-) create mode 100644 sound/soc/amd/acp-es8336.c -- 2.25.1

3 8