- Alsa-devel - mailman.alsa-project.org

[PATCH linux-next v2] ASoC: SOF: remove duplicated included sof-audio.h
by yang.yang29＠zte.com.cn 10 Nov '22

10 Nov '22

From: Xu Panda <xu.panda(a)zte.com.cn> The sof-audio.h is included more than once. Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: Xu Panda <xu.panda(a)zte.com.cn> Signed-off-by: Yang Yang <yang.yang29(a)zte.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- change for v2 - add maintainers and the alsa-devel mailing list in CC. --- sound/soc/sof/amd/acp-common.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/sof/amd/acp-common.c b/sound/soc/sof/amd/acp-common.c index 27b95187356e..348e70dfe2a5 100644 --- a/sound/soc/sof/amd/acp-common.c +++ b/sound/soc/sof/amd/acp-common.c @@ -13,7 +13,6 @@ #include "../sof-priv.h" #include "../sof-audio.h" #include "../ops.h" -#include "../sof-audio.h" #include "acp.h" #include "acp-dsp-offset.h" -- 2.15.2

3 2

[PATCH 0/2] ASoC: Intel: avs: DSP recovery and resume fixes
by Cezary Rojewski 10 Nov '22

10 Nov '22

Two fixes that are result of the recent discussions [1][2]. First adds missing locking around snd_pcm_stop() while the second fix sets substream state to DISCONNECTED if any suspend/resume related operation fails so that userspace has means to be aware that something went wrong during said operation. [1]: https://lore.kernel.org/alsa-devel/73e6425f-8e51-e26f-ad83-ccc5df517a43@int… [2]: https://lore.kernel.org/alsa-devel/20221104131244.3920179-1-cezary.rojewski… Cezary Rojewski (2): ASoC: Intel: avs: Lock substream before snd_pcm_stop() ASoC: Intel: avs: Disconnect substream if suspend or resume fails sound/soc/intel/avs/ipc.c | 2 ++ sound/soc/intel/avs/pcm.c | 10 ++++++++-- 2 files changed, 10 insertions(+), 2 deletions(-) -- 2.25.1

2 8

[PATCH] ALSA: hda: fix potential memleak in 'add_widget_node'
by Ye Bin 10 Nov '22

10 Nov '22

From: Ye Bin <yebin10(a)huawei.com> As 'kobject_add' may allocated memory for 'kobject->name' when return error. And in this function, if call 'kobject_add' failed didn't free kobject. So call 'kobject_put' to recycling resources. Signed-off-by: Ye Bin <yebin10(a)huawei.com> --- sound/hda/hdac_sysfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/hda/hdac_sysfs.c b/sound/hda/hdac_sysfs.c index e47de49a32e3..62a9615dcf52 100644 --- a/sound/hda/hdac_sysfs.c +++ b/sound/hda/hdac_sysfs.c @@ -346,8 +346,10 @@ static int add_widget_node(struct kobject *parent, hda_nid_t nid, return -ENOMEM; kobject_init(kobj, &widget_ktype); err = kobject_add(kobj, parent, "%02x", nid); - if (err < 0) + if (err < 0) { + kobject_put(kobj); return err; + } err = sysfs_create_group(kobj, group); if (err < 0) { kobject_put(kobj); -- 2.31.1

2 1

[PATCH] ASoC: codecs: wsa883x: Use proper shutdown GPIO values
by Krzysztof Kozlowski 10 Nov '22

10 Nov '22

The shutdown GPIO is active_low (sd_n), but this depends on actual board layout. Linux drivers should only care about logical state, where high (1) means shutdown and low (0) means do not shutdown. Invert the GPIO to match logical value. Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/codecs/wsa883x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c index c7b10bbfba7e..77a7dd3cf495 100644 --- a/sound/soc/codecs/wsa883x.c +++ b/sound/soc/codecs/wsa883x.c @@ -1392,7 +1392,7 @@ static int wsa883x_probe(struct sdw_slave *pdev, } wsa883x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown", - GPIOD_FLAGS_BIT_NONEXCLUSIVE); + GPIOD_FLAGS_BIT_NONEXCLUSIVE | GPIOD_OUT_HIGH); if (IS_ERR(wsa883x->sd_n)) { dev_err(&pdev->dev, "Shutdown Control GPIO not found\n"); ret = PTR_ERR(wsa883x->sd_n); @@ -1411,7 +1411,7 @@ static int wsa883x_probe(struct sdw_slave *pdev, pdev->prop.simple_clk_stop_capable = true; pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop; pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; - gpiod_direction_output(wsa883x->sd_n, 1); + gpiod_direction_output(wsa883x->sd_n, 0); wsa883x->regmap = devm_regmap_init_sdw(pdev, &wsa883x_regmap_config); if (IS_ERR(wsa883x->regmap)) { -- 2.34.1

1 1

[PATCH] ALSA: memalloc: Don't fall back for SG-buffer with IOMMU
by Takashi Iwai 10 Nov '22

10 Nov '22

When the non-contiguous page allocation for SG buffer allocation fails, the memalloc helper tries to fall back to the old page allocation methods. This would, however, result in the bogus page addresses when IOMMU is enabled. Usually in such a case, the fallback allocation should fail as well, but occasionally it succeeds and hitting a bad access. The fallback was thought for non-IOMMU case, and as the error from dma_alloc_noncontiguous() with IOMMU essentially implies a fatal memory allocation error, we should return the error straightforwardly without fallback. This avoids the corner case like the above. The patch also renames the local variable "dma_ops" with snd_ prefix for avoiding the name conflict. Fixes: a8d302a0b770 ("ALSA: memalloc: Revive x86-specific WC page allocations again") Reported-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2211041541090.3532114@elitele… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/memalloc.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index 03cffe771366..6a81aaab25ab 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -9,6 +9,7 @@ #include <linux/slab.h> #include <linux/mm.h> #include <linux/dma-mapping.h> +#include <linux/dma-map-ops.h> #include <linux/genalloc.h> #include <linux/highmem.h> #include <linux/vmalloc.h> @@ -541,19 +542,20 @@ static void *snd_dma_noncontig_alloc(struct snd_dma_buffer *dmab, size_t size) struct sg_table *sgt; void *p; - sgt = dma_alloc_noncontiguous(dmab->dev.dev, size, dmab->dev.dir, - DEFAULT_GFP, 0); - if (!sgt) { #ifdef CONFIG_SND_DMA_SGBUF + if (!get_dma_ops(dmab->dev.dev)) { if (dmab->dev.type == SNDRV_DMA_TYPE_DEV_WC_SG) dmab->dev.type = SNDRV_DMA_TYPE_DEV_WC_SG_FALLBACK; else dmab->dev.type = SNDRV_DMA_TYPE_DEV_SG_FALLBACK; return snd_dma_sg_fallback_alloc(dmab, size); -#else - return NULL; -#endif } +#endif + + sgt = dma_alloc_noncontiguous(dmab->dev.dev, size, dmab->dev.dir, + DEFAULT_GFP, 0); + if (!sgt) + return NULL; dmab->dev.need_sync = dma_need_sync(dmab->dev.dev, sg_dma_address(sgt->sgl)); @@ -857,7 +859,7 @@ static const struct snd_malloc_ops snd_dma_noncoherent_ops = { /* * Entry points */ -static const struct snd_malloc_ops *dma_ops[] = { +static const struct snd_malloc_ops *snd_dma_ops[] = { [SNDRV_DMA_TYPE_CONTINUOUS] = &snd_dma_continuous_ops, [SNDRV_DMA_TYPE_VMALLOC] = &snd_dma_vmalloc_ops, #ifdef CONFIG_HAS_DMA @@ -883,7 +885,7 @@ static const struct snd_malloc_ops *snd_dma_get_ops(struct snd_dma_buffer *dmab) if (WARN_ON_ONCE(!dmab)) return NULL; if (WARN_ON_ONCE(dmab->dev.type <= SNDRV_DMA_TYPE_UNKNOWN || - dmab->dev.type >= ARRAY_SIZE(dma_ops))) + dmab->dev.type >= ARRAY_SIZE(snd_dma_ops))) return NULL; - return dma_ops[dmab->dev.type]; + return snd_dma_ops[dmab->dev.type]; } -- 2.35.3

1 0

Re: regression with SG DMA buf allocations and IOMMU in low-mem
by Kai Vehmanen 10 Nov '22

10 Nov '22

Hi, [ and sorry, I had the bounces address in cc originally, routing reply to list as well ] On Fri, 4 Nov 2022, Takashi Iwai wrote: > On Fri, 04 Nov 2022 15:56:50 +0100, Kai Vehmanen wrote: > > I've been debugging a SOF DSP load fail on VT-D/IOMMU systems [1] and > > that brought me to these two commits from you: > > .. but in rare low-memory cases, the dma_alloc_noncontiguous() > > call will fail in core/memalloc.c and we go to the fallback path. > > > > So we go to snd_dma_sg_fallback_alloc(), but here it seems something is > > missing. The pages are not allocated with DMA mapping API anymore, so > > IOMMU won't know about the memory and in our case the DSP load will fail > > to a IOMMU fault. [...] > > Hrm, that's a tough issue. Basically if dma_alloc_noncontiguous() > fails, it's really out of memory -- at least under the situation where > IOMMU is enabled. The fallback path was introduced for the case where > there is no IOMMU and noncontiguous allocation fails from the > beginning. ack. This matches with the bug reports. These happen rarely and on systems with a lot of memory pressure. We have recently submitted a few features&fixes that will further reduce these allocs, so it probably is better outcome to have a plain out of memory error. > And, what makes things more complicated is that snd_dma_dev_alloc() > cannot be used for SG pages when IOMMU is involved. We can't get the > proper pages for mapping SG from the DMA address in that case; some > systems may work with virt_to_page() but it's not guranteed to work. Aa, ok, so we need to use dma_alloc_noncontiguous() to do this properly and if it returns ENOMEM, that's what it is then, right. > So, I believe there are two issues: > 1. The firmware allocation fails with dma_alloc_noncontiguous() with > IOMMU enabled > > 2. The helper goes to the fallback path and occasionally it worked, > although the pages can't be used with IOMMU. > > Basically when 1 happens, we should just return an error without going > to fallback path. But it won't "fix" your case? I think an explicit error would be best. The problem now is that the driver will think the allocation (and mapping to device) is fine and proceeds to program the hardware to use the address. This will then create an IOMMU fault down the line that is not so straighforward to recover from (worst case is that a full device level reset needs to be done). And given driver doesn't know it got a faulty mapping, it's hard to make the decision why the fault happened. Br, Kai

2 3

[PATCH] ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue
by Ai Chao 10 Nov '22

10 Nov '22

For Hamedal C20, the current rate is different from the runtime rate, snd_usb_endpoint stop and close endpoint to resetting rate. if snd_usb_endpoint close the endpoint, sometimes usb will disconnect the device. Signed-off-by: Ai Chao <aichao(a)kylinos.cn> --- sound/usb/endpoint.c | 3 ++- sound/usb/quirks.c | 2 ++ sound/usb/usbaudio.h | 3 +++ 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index d0b8d61d1d22..310cd6fb0038 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -931,7 +931,8 @@ void snd_usb_endpoint_close(struct snd_usb_audio *chip, usb_audio_dbg(chip, "Closing EP 0x%x (count %d)\n", ep->ep_num, ep->opened); - if (!--ep->iface_ref->opened) + if (!--ep->iface_ref->opened && + !(chip->quirk_flags & QUIRK_FLAG_IFACE_SKIP_CLOSE)) endpoint_set_interface(chip, ep, false); if (!--ep->opened) { diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index eadac586bcc8..a50e15be1229 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2185,6 +2185,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_GENERIC_IMPLICIT_FB), DEVICE_FLG(0x2b53, 0x0031, /* Fiero SC-01 (firmware v1.1.0) */ QUIRK_FLAG_GENERIC_IMPLICIT_FB), + DEVICE_FLG(0x0525, 0xa4ad, /* Hamedal C20 usb camero */ + QUIRK_FLAG_IFACE_SKIP_CLOSE), /* Vendor matches */ VENDOR_FLG(0x045e, /* MS Lifecam */ diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 2c6575029b1c..e97141ef730a 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -170,6 +170,8 @@ extern bool snd_usb_skip_validation; * Apply the generic implicit feedback sync mode (same as implicit_fb=1 option) * QUIRK_FLAG_SKIP_IMPLICIT_FB * Don't apply implicit feedback sync mode + * QUIRK_FLAG_IFACE_SKIP_CLOSE + * Don't closed interface during setting sample rate */ #define QUIRK_FLAG_GET_SAMPLE_RATE (1U << 0) @@ -191,5 +193,6 @@ extern bool snd_usb_skip_validation; #define QUIRK_FLAG_SET_IFACE_FIRST (1U << 16) #define QUIRK_FLAG_GENERIC_IMPLICIT_FB (1U << 17) #define QUIRK_FLAG_SKIP_IMPLICIT_FB (1U << 18) +#define QUIRK_FLAG_IFACE_SKIP_CLOSE (1U << 19) #endif /* __USBAUDIO_H */ -- 2.25.1

2 1

[PATCH] ALSA: hda/realtek: Add Positivo C6300 model quirk
by Edson Juliano Drosdeck 10 Nov '22

10 Nov '22

Positivo Master C6300 (1849:a233) require quirk for anabling headset-mic Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 701a72ec5629..7875566d6183 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9608,6 +9608,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x511f, "Thinkpad", ALC298_FIXUP_TPT470_DOCK), SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), SND_PCI_QUIRK(0x1849, 0x1233, "ASRock NUC Box 1100", ALC233_FIXUP_NO_AUDIO_JACK), + SND_PCI_QUIRK(0x1849, 0xa233, "Positivo Master C6300", ALC269_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x19e5, 0x3204, "Huawei MACH-WX9", ALC256_FIXUP_HUAWEI_MACH_WX9_PINS), SND_PCI_QUIRK(0x19e5, 0x320f, "Huawei WRT-WX9 ", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1b35, 0x1235, "CZC B20", ALC269_FIXUP_CZC_B20), -- 2.37.2

3 2

[PATCH v6 0/4] Convert soundwire bindings to DT schema
by Srinivasa Rao Mandadapu 10 Nov '22

10 Nov '22

Convert soundwire bindings text file to DT schema and update device tree entries to follow strict dt-bindings. Changes since V5: -- Update indentation of few properties description. -- Update minimum and maximum limit for few properties. -- Fix Typo errors in commit message. -- Update commit message with differences from text file. Changes Since V4: -- Update interrupt names in example. -- Fix blank lines. -- Remove dependecy patch info. -- Split dtsi patches as per SoC. Changes Since V3: -- Remove subnode description and add appropriate pattern properties. -- Add interrput names in example. -- update some properties description. -- Revert minIteams change in previous version. -- Rebase to latest code base. -- Update dtsi node names, -- Remove redundant property in soundwire node. Srinivasa Rao Mandadapu (4): arm64: dts: qcom: Update soundwire secondary node names arm64: dts: qcom: sm8250: Remove redundant soundwire property arm64: dts: qcom: sc7280: Remove redundant soundwire property dt-bindings: soundwire: Convert text bindings to DT Schema .../devicetree/bindings/soundwire/qcom,sdw.txt | 215 ---------------- .../bindings/soundwire/qcom,soundwire.yaml | 270 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 4 +- arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 - arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 +- .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 +- arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 4 +- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 1 - 9 files changed, 280 insertions(+), 227 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soundwire/qcom,sdw.txt create mode 100644 Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml -- 2.7.4

4 7

[PATCH] ASoC: stm32: dfsdm: manage cb buffers cleanup
by Olivier Moysan 09 Nov '22

09 Nov '22

Ensure that resources allocated by iio_channel_get_all_cb() are released on driver unbind. Signed-off-by: Olivier Moysan <olivier.moysan(a)foss.st.com> --- sound/soc/stm/stm32_adfsdm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/stm/stm32_adfsdm.c b/sound/soc/stm/stm32_adfsdm.c index 643fc8a17018..837c1848d9bf 100644 --- a/sound/soc/stm/stm32_adfsdm.c +++ b/sound/soc/stm/stm32_adfsdm.c @@ -304,6 +304,11 @@ static int stm32_adfsdm_dummy_cb(const void *data, void *private) return 0; } +static void stm32_adfsdm_cleanup(void *data) +{ + iio_channel_release_all_cb(data); +} + static struct snd_soc_component_driver stm32_adfsdm_soc_platform = { .open = stm32_adfsdm_pcm_open, .close = stm32_adfsdm_pcm_close, @@ -350,6 +355,12 @@ static int stm32_adfsdm_probe(struct platform_device *pdev) if (IS_ERR(priv->iio_cb)) return PTR_ERR(priv->iio_cb); + ret = devm_add_action_or_reset(&pdev->dev, stm32_adfsdm_cleanup, priv->iio_cb); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to add action\n"); + return ret; + } + component = devm_kzalloc(&pdev->dev, sizeof(*component), GFP_KERNEL); if (!component) return -ENOMEM; -- 2.25.1

2 1