- Alsa-devel - mailman.alsa-project.org

[PATCH 6.1 0325/1146] ASoC: codecs: wsa883x: use correct header file
by Greg Kroah-Hartman 28 Dec '22

28 Dec '22

From: Randy Dunlap <rdunlap(a)infradead.org> [ Upstream commit 5f52ceddc40cd61b1dd2ecf735624deaf05f779f ] Fix build errors when GPIOLIB is not set/enabled: ../sound/soc/codecs/wsa883x.c: In function 'wsa883x_probe': ../sound/soc/codecs/wsa883x.c:1394:25: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration] wsa883x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown", ../sound/soc/codecs/wsa883x.c:1395:49: error: 'GPIOD_FLAGS_BIT_NONEXCLUSIVE' undeclared (first use in this function) GPIOD_FLAGS_BIT_NONEXCLUSIVE); ../sound/soc/codecs/wsa883x.c:1414:9: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration] gpiod_direction_output(wsa883x->sd_n, 1); Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Reported-by: kernel test robot <lkp(a)intel.com> Cc: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Cc: Banajit Goswami <bgoswami(a)quicinc.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: alsa-devel(a)alsa-project.org Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Link: https://lore.kernel.org/r/20221108001829.5100-1-rdunlap@infradead.org Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/wsa883x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c index 77a7dd3cf495..0ddb6362fcc5 100644 --- a/sound/soc/codecs/wsa883x.c +++ b/sound/soc/codecs/wsa883x.c @@ -7,7 +7,7 @@ #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/device.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> -- 2.35.1

1 0

[PATCH] ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
by Takashi Iwai 28 Dec '22

28 Dec '22

The recent code refactoring for HD-audio HDMI codec driver caused a regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire don't recognize HDMI outputs any longer while the direct output via ALSA raw access still works. The problem turned out that, after the code refactoring, the driver assumes only the dynamic PCM assignment, and when a PCM stream that still isn't assigned to any pin gets opened, the driver tries to assign any free converter to the PCM stream. This behavior is OK for Intel and other codecs, as they have arbitrary connections between pins and converters. OTOH, on AMD chips that have a 1:1 mapping between pins and converters, this may end up with blocking the open of the next PCM stream for the pin that is tied with the formerly taken converter. Also, with the code refactoring, more PCM streams are exposed than necessary as we assume all converters can be used, while this isn't true for AMD case. This may change the PCM stream assignment and confuse users as well. This patch fixes those problems by: - Introducing a flag spec->static_pcm_mapping, and if it's set, the driver applies the static mapping between pins and converters at the probe time - Limiting the number of PCM streams per pins, too; this avoids the superfluous PCM streams Fixes: ef6f5494faf6 ("ALSA: hda/hdmi: Use only dynamic PCM device allocation") Cc: <stable(a)vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836 Co-developed-by: Jaroslav Kysela <perex(a)perex.cz> Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_hdmi.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 8015e4471267..386dd9d9143f 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -167,6 +167,7 @@ struct hdmi_spec { struct hdmi_ops ops; bool dyn_pin_out; + bool static_pcm_mapping; /* hdmi interrupt trigger control flag for Nvidia codec */ bool hdmi_intr_trig_ctrl; bool nv_dp_workaround; /* workaround DP audio infoframe for Nvidia */ @@ -1525,13 +1526,16 @@ static void update_eld(struct hda_codec *codec, */ pcm_jack = pin_idx_to_pcm_jack(codec, per_pin); - if (eld->eld_valid) { - hdmi_attach_hda_pcm(spec, per_pin); - hdmi_pcm_setup_pin(spec, per_pin); - } else { - hdmi_pcm_reset_pin(spec, per_pin); - hdmi_detach_hda_pcm(spec, per_pin); + if (!spec->static_pcm_mapping) { + if (eld->eld_valid) { + hdmi_attach_hda_pcm(spec, per_pin); + hdmi_pcm_setup_pin(spec, per_pin); + } else { + hdmi_pcm_reset_pin(spec, per_pin); + hdmi_detach_hda_pcm(spec, per_pin); + } } + /* if pcm_idx == -1, it means this is in monitor connection event * we can get the correct pcm_idx now. */ @@ -2281,8 +2285,8 @@ static int generic_hdmi_build_pcms(struct hda_codec *codec) struct hdmi_spec *spec = codec->spec; int idx, pcm_num; - /* limit the PCM devices to the codec converters */ - pcm_num = spec->num_cvts; + /* limit the PCM devices to the codec converters or available PINs */ + pcm_num = min(spec->num_cvts, spec->num_pins); codec_dbg(codec, "hdmi: pcm_num set to %d\n", pcm_num); for (idx = 0; idx < pcm_num; idx++) { @@ -2379,6 +2383,11 @@ static int generic_hdmi_build_controls(struct hda_codec *codec) struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx); struct hdmi_eld *pin_eld = &per_pin->sink_eld; + if (spec->static_pcm_mapping) { + hdmi_attach_hda_pcm(spec, per_pin); + hdmi_pcm_setup_pin(spec, per_pin); + } + pin_eld->eld_valid = false; hdmi_present_sense(per_pin, 0); } @@ -4419,6 +4428,8 @@ static int patch_atihdmi(struct hda_codec *codec) spec = codec->spec; + spec->static_pcm_mapping = true; + spec->ops.pin_get_eld = atihdmi_pin_get_eld; spec->ops.pin_setup_infoframe = atihdmi_pin_setup_infoframe; spec->ops.pin_hbr_setup = atihdmi_pin_hbr_setup; -- 2.35.3

1 0

wm8904 and output volume control
by Emanuele Ghidoli 28 Dec '22

28 Dec '22

Hello, I have found that output volume is set to the default value after a limited time (~4 seconds) after play stop. I have analyzed what is happening: - at first play the volume is the expected one - After stopping playing + ~4 seconds wm8904_set_bias_level (..., SND_SOC_BIAS_OFF) is called - Chip is reset and regulator is switched off if "possible" (not in our case, it is important to note) - at second play wm8904_set_bias_level (..., SND_SOC_BIAS_STANDBY) is called. wm8904_hw_params is also called just before. I see that all I2C transactions are good, registers are written as expected, especially volume control register (even the silly HPOUT_VU bit, to do a volume update is correctly written). Reading out this register, using i2cget (bypassing regcache), report the "expected" value. But the real output volume correspond to the default value (hw default, that it is the same value in wm8904_reg_defaults structure). I checked that SYSCLK_ENA is 0 during register writing (needed if MCLK/SYSCLK is not present). I do not know if there is some other constrain on these registers. If I rewrite the volume control register, a second time, the volume is set (tested with i2cset, from user space. And from kernel space, bypassing regcache). I resolve also by reverting e9149b8c00d2 ("ASoC: wm8904: fix regcache handling"). I'm not here to say that the commit is wrong. I analyzed it and seem perfect (in few words it align the hw with the regcache avoiding potential incoherence). I'm trying to compare first play and second play register programming sequence. They are similar but not the same. But on the first play the volume output is good. Do someone remember something similar fixed on another codec? Any idea is appreciated. Thank you. Best regards, Emanuele Ghidoli

2 7

[PATCH AUTOSEL 5.15 11/22] soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15
by Sasha Levin 27 Dec '22

27 Dec '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit f74495761df10c25a98256d16ea7465191b6e2cd ] Some NUC15 LAPBC710 devices don't expose the same DMI information as the Intel reference, add additional entry in the match table. BugLink: https://github.com/thesofproject/linux/issues/3885 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20221018012500.1592994-1-yung-chuan.liao@linux.in… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c index 747983743a14..2bf534632f64 100644 --- a/drivers/soundwire/dmi-quirks.c +++ b/drivers/soundwire/dmi-quirks.c @@ -71,6 +71,14 @@ static const struct dmi_system_id adr_remap_quirk_table[] = { }, .driver_data = (void *)intel_tgl_bios, }, + { + /* quirk used for NUC15 LAPBC710 skew */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "LAPBC710"), + }, + .driver_data = (void *)intel_tgl_bios, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), -- 2.35.1

1 0

[PATCH AUTOSEL 6.0 11/27] soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15
by Sasha Levin 27 Dec '22

27 Dec '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit f74495761df10c25a98256d16ea7465191b6e2cd ] Some NUC15 LAPBC710 devices don't expose the same DMI information as the Intel reference, add additional entry in the match table. BugLink: https://github.com/thesofproject/linux/issues/3885 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20221018012500.1592994-1-yung-chuan.liao@linux.in… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c index f81cdd83ec26..7969881f126d 100644 --- a/drivers/soundwire/dmi-quirks.c +++ b/drivers/soundwire/dmi-quirks.c @@ -90,6 +90,14 @@ static const struct dmi_system_id adr_remap_quirk_table[] = { }, .driver_data = (void *)intel_tgl_bios, }, + { + /* quirk used for NUC15 LAPBC710 skew */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "LAPBC710"), + }, + .driver_data = (void *)intel_tgl_bios, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), -- 2.35.1

1 0

[PATCH AUTOSEL 6.1 11/28] soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15
by Sasha Levin 27 Dec '22

27 Dec '22

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit f74495761df10c25a98256d16ea7465191b6e2cd ] Some NUC15 LAPBC710 devices don't expose the same DMI information as the Intel reference, add additional entry in the match table. BugLink: https://github.com/thesofproject/linux/issues/3885 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20221018012500.1592994-1-yung-chuan.liao@linux.in… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c index f81cdd83ec26..7969881f126d 100644 --- a/drivers/soundwire/dmi-quirks.c +++ b/drivers/soundwire/dmi-quirks.c @@ -90,6 +90,14 @@ static const struct dmi_system_id adr_remap_quirk_table[] = { }, .driver_data = (void *)intel_tgl_bios, }, + { + /* quirk used for NUC15 LAPBC710 skew */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "LAPBC710"), + }, + .driver_data = (void *)intel_tgl_bios, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), -- 2.35.1

1 0

[PATCH] ASoC: rt711-sdca: add jack detection mode for JD2 100K
by shumingf＠realtek.com 27 Dec '22

27 Dec '22

From: Shuming Fan <shumingf(a)realtek.com> This patch adds another jack detection mode for JD2 with an external resistor of 100k. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt711-sdca.c | 15 +++++++++++++++ sound/soc/codecs/rt711-sdca.h | 8 +++++++- 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt711-sdca.c b/sound/soc/codecs/rt711-sdca.c index b78dd5994edb..7cdf184d380b 100644 --- a/sound/soc/codecs/rt711-sdca.c +++ b/sound/soc/codecs/rt711-sdca.c @@ -463,6 +463,21 @@ static void rt711_sdca_jack_init(struct rt711_sdca_priv *rt711) RT711_HP_JD_FINAL_RESULT_CTL_JD12, RT711_HP_JD_FINAL_RESULT_CTL_JD12); break; + case RT711_JD2_100K: + rt711_sdca_index_write(rt711, RT711_VENDOR_REG, + RT711_COMBO_JACK_AUTO_CTL3, 0xa47e); + rt711_sdca_index_update_bits(rt711, RT711_VENDOR_REG, + RT711_JD_CTL1, RT711_JD2_DIGITAL_MODE_SEL, + RT711_JD2_DIGITAL_MODE_SEL); + rt711_sdca_index_update_bits(rt711, RT711_VENDOR_REG, + RT711_JD_CTL2, RT711_JD2_2PORT_200K_DECODE_HP | + RT711_JD2_2PORT_100K_DECODE_MASK | RT711_HP_JD_SEL_JD2, + RT711_JD2_2PORT_100K_DECODE_HP | RT711_HP_JD_SEL_JD2); + rt711_sdca_index_update_bits(rt711, RT711_VENDOR_REG, + RT711_CC_DET1, + RT711_HP_JD_FINAL_RESULT_CTL_JD12 | RT711_POW_CC1_AGPI, + RT711_HP_JD_FINAL_RESULT_CTL_JD12 | RT711_POW_CC1_AGPI_OFF); + break; default: dev_warn(rt711->component->dev, "Wrong JD source\n"); break; diff --git a/sound/soc/codecs/rt711-sdca.h b/sound/soc/codecs/rt711-sdca.h index 498ca687c47b..10e3c801b813 100644 --- a/sound/soc/codecs/rt711-sdca.h +++ b/sound/soc/codecs/rt711-sdca.h @@ -127,12 +127,17 @@ struct sdw_stream_data { /* jack detect control 2 (0x09)(NID:20h) */ #define RT711_JD2_2PORT_200K_DECODE_HP (0x1 << 13) +#define RT711_JD2_2PORT_100K_DECODE_MASK (0x1 << 12) +#define RT711_JD2_2PORT_100K_DECODE_HP (0x0 << 12) #define RT711_HP_JD_SEL_JD1 (0x0 << 1) #define RT711_HP_JD_SEL_JD2 (0x1 << 1) /* CC DET1 (0x11)(NID:20h) */ #define RT711_HP_JD_FINAL_RESULT_CTL_JD12 (0x1 << 10) #define RT711_HP_JD_FINAL_RESULT_CTL_CCDET (0x0 << 10) +#define RT711_POW_CC1_AGPI (0x1 << 5) +#define RT711_POW_CC1_AGPI_ON (0x1 << 5) +#define RT711_POW_CC1_AGPI_OFF (0x0 << 5) /* Parameter & Verb control (0x1a)(NID:20h) */ #define RT711_HIDDEN_REG_SW_RESET (0x1 << 14) @@ -226,7 +231,8 @@ enum { enum rt711_sdca_jd_src { RT711_JD_NULL, RT711_JD1, - RT711_JD2 + RT711_JD2, + RT711_JD2_100K }; enum rt711_sdca_ver { -- 2.38.1

2 1

[PATCH v4] dt-bindings: sound: tlv320aic3x: Convert to dtschema
by Jai Luthra 27 Dec '22

27 Dec '22

Convert bindings for TI's TLV320AIC3x audio codecs to dtschema. The following properties are still found in some old dts files, but will be ignored by the driver: - adc-settle-ms - assigned-clock-parents, assigned-clock-rates, assigned-clocks - port Signed-off-by: Jai Luthra <j-luthra(a)ti.com> --- Changes in v4: - Use generic node name in the example - Fix typo in commit message v3: https://lore.kernel.org/linux-devicetree/20221220123951.29959-1-j-luthra@ti… v2: https://lore.kernel.org/linux-devicetree/20220803151726.31628-1-j-luthra@ti… .../bindings/sound/ti,tlv320aic3x.yaml | 158 ++++++++++++++++++ .../devicetree/bindings/sound/tlv320aic3x.txt | 97 ----------- 2 files changed, 158 insertions(+), 97 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.txt diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml new file mode 100644 index 000000000000..f0375bbf4c40 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320aic3x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320AIC3x Codec + +description: | + TLV320AIC3x are a series of low-power stereo audio codecs with stereo + headphone amplifier, as well as multiple inputs and outputs programmable in + single-ended or fully differential configurations. + + The serial control bus supports SPI or I2C protocols, while the serial audio + data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. + + The following pins can be referred in the sound node's audio routing property: + + CODEC output pins: + LLOUT + RLOUT + MONO_LOUT + HPLOUT + HPROUT + HPLCOM + HPRCOM + + CODEC input pins for TLV320AIC3104: + MIC2L + MIC2R + LINE1L + LINE1R + + CODEC input pins for other compatible codecs: + MIC3L + MIC3R + LINE1L + LINE2L + LINE1R + LINE2R + +maintainers: + - Jai Luthra <j-luthra(a)ti.com> + +properties: + compatible: + enum: + - ti,tlv320aic3x + - ti,tlv320aic33 + - ti,tlv320aic3007 + - ti,tlv320aic3106 + - ti,tlv320aic3104 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + GPIO specification for the active low RESET input. + + gpio-reset: + maxItems: 1 + description: + Deprecated, please use reset-gpios instead. + deprecated: true + + ai3x-gpio-func: + description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + + ai3x-micbias-vg: + description: MicBias required voltage. If node is omitted then MicBias is powered down. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 1 + description: MICBIAS output is powered to 2.0V. + - const: 2 + description: MICBIAS output is powered to 2.5V. + - const: 3 + description: MICBIAS output is connected to AVDD. + + ai3x-ocmv: + description: Output Common-Mode Voltage selection. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 0 + description: 1.35V + - const: 1 + description: 1.5V + - const: 2 + description: 1.65V + - const: 3 + description: 1.8V + + AVDD-supply: + description: Analog DAC voltage. + + IOVDD-supply: + description: I/O voltage. + + DRVDD-supply: + description: ADC analog and output driver voltage. + + DVDD-supply: + description: Digital core voltage. + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_i2c: audio-codec@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + + AVDD-supply = <&regulator>; + IOVDD-supply = <&regulator>; + DRVDD-supply = <&regulator>; + DVDD-supply = <&regulator>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_spi: audio-codec@0 { + compatible = "ti,tlv320aic3x"; + reg = <0>; /* CS number */ + #sound-dai-cells = <0>; + + AVDD-supply = <&regulator>; + IOVDD-supply = <&regulator>; + DRVDD-supply = <&regulator>; + DVDD-supply = <&regulator>; + ai3x-ocmv = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt deleted file mode 100644 index 20931a63fd64..000000000000 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ /dev/null @@ -1,97 +0,0 @@ -Texas Instruments - tlv320aic3x Codec module - -The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols - -Required properties: - -- compatible - "string" - One of: - "ti,tlv320aic3x" - Generic TLV320AIC3x device - "ti,tlv320aic33" - TLV320AIC33 - "ti,tlv320aic3007" - TLV320AIC3007 - "ti,tlv320aic3106" - TLV320AIC3106 - "ti,tlv320aic3104" - TLV320AIC3104 - - -- reg - <int> - I2C slave address - - -Optional properties: - -- reset-gpios - GPIO specification for the active low RESET input. -- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality - - Not supported on tlv320aic3104 -- ai3x-micbias-vg - MicBias Voltage required. - 1 - MICBIAS output is powered to 2.0V, - 2 - MICBIAS output is powered to 2.5V, - 3 - MICBIAS output is connected to AVDD, - If this node is not mentioned or if the value is incorrect, then MicBias - is powered down. -- ai3x-ocmv - Output Common-Mode Voltage selection: - 0 - 1.35V, - 1 - 1.5V, - 2 - 1.65V, - 3 - 1.8V -- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the - device as covered in Documentation/devicetree/bindings/regulator/regulator.txt - -Deprecated properties: - -- gpio-reset - gpio pin number used for codec reset - -CODEC output pins: - * LLOUT - * RLOUT - * MONO_LOUT - * HPLOUT - * HPROUT - * HPLCOM - * HPRCOM - -CODEC input pins for TLV320AIC3104: - * MIC2L - * MIC2R - * LINE1L - * LINE1R - -CODEC input pins for other compatible codecs: - * MIC3L - * MIC3R - * LINE1L - * LINE2L - * LINE1R - * LINE2R - -The pins can be used in referring sound node's audio-routing property. - -I2C example: - -#include <dt-bindings/gpio/gpio.h> - -tlv320aic3x: tlv320aic3x@1b { - compatible = "ti,tlv320aic3x"; - reg = <0x1b>; - - reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - - AVDD-supply = <&regulator>; - IOVDD-supply = <&regulator>; - DRVDD-supply = <&regulator>; - DVDD-supply = <&regulator>; -}; - -SPI example: - -spi0: spi@f0000000 { - tlv320aic3x: codec@0 { - compatible = "ti,tlv320aic3x"; - reg = <0>; /* CS number */ - #sound-dai-cells = <0>; - spi-max-frequency = <1000000>; - - AVDD-supply = <&regulator>; - IOVDD-supply = <&regulator>; - DRVDD-supply = <&regulator>; - DVDD-supply = <&regulator>; - ai3x-ocmv = <0>; - }; -}; -- 2.17.1

3 4

[PATCH V2 1/4] ASoC: amd: ps: implement api to retrieve acp device config
by Vijendar Mukunda 27 Dec '22

27 Dec '22

Implement API to retrieve acp device config and calculate platform device count and dev mask for platform device node creation. Currently for DMIC configuration, mask and dev count are calculated. Same api will be used to extend support for different ACP device configurations. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- since v1: - fixed below build error sound/soc/amd/ps/pci-ps.c:231:60: error: use of undeclared identifier 'ACP_DMIC_ADDR' - fixed below kernel warning >> sound/soc/amd/ps/pci-ps.c:135:6: warning: no previous prototype for >> function 'get_acp63_device_config' [-Wmissing-prototypes] sound/soc/amd/ps/acp63.h | 7 +++++++ sound/soc/amd/ps/pci-ps.c | 38 ++++++++++++++++++++++++++++++++++++-- 2 files changed, 43 insertions(+), 2 deletions(-) diff --git a/sound/soc/amd/ps/acp63.h b/sound/soc/amd/ps/acp63.h index 5e7f9c1c1b0e..b015e845e5fa 100644 --- a/sound/soc/amd/ps/acp63.h +++ b/sound/soc/amd/ps/acp63.h @@ -54,6 +54,11 @@ /* time in ms for runtime suspend delay */ #define ACP_SUSPEND_DELAY_MS 2000 +#define ACP63_DMIC_ADDR 2 +#define ACP63_PDM_MODE_DEVS 3 +#define ACP63_PDM_DEV_MASK 1 +#define ACP_DMIC_DEV 2 + enum acp_config { ACP_CONFIG_0 = 0, ACP_CONFIG_1, @@ -102,4 +107,6 @@ struct acp63_dev_data { struct resource *res; bool acp63_audio_mode; struct platform_device *pdev[ACP63_DEVS]; + u16 pdev_mask; + u16 pdev_count; }; diff --git a/sound/soc/amd/ps/pci-ps.c b/sound/soc/amd/ps/pci-ps.c index 489f01a20699..86af94f6f06e 100644 --- a/sound/soc/amd/ps/pci-ps.c +++ b/sound/soc/amd/ps/pci-ps.c @@ -132,6 +132,39 @@ static irqreturn_t acp63_irq_handler(int irq, void *dev_id) return IRQ_NONE; } +static void get_acp63_device_config(u32 config, struct pci_dev *pci, + struct acp63_dev_data *acp_data) +{ + struct acpi_device *dmic_dev; + const union acpi_object *obj; + bool is_dmic_dev = false; + + dmic_dev = acpi_find_child_device(ACPI_COMPANION(&pci->dev), ACP63_DMIC_ADDR, 0); + if (dmic_dev) { + if (!acpi_dev_get_property(dmic_dev, "acp-audio-device-type", + ACPI_TYPE_INTEGER, &obj) && + obj->integer.value == ACP_DMIC_DEV) + is_dmic_dev = true; + } + + switch (config) { + case ACP_CONFIG_0: + case ACP_CONFIG_1: + case ACP_CONFIG_2: + case ACP_CONFIG_3: + case ACP_CONFIG_9: + case ACP_CONFIG_15: + dev_dbg(&pci->dev, "Audio Mode %d\n", config); + break; + default: + if (is_dmic_dev) { + acp_data->pdev_mask = ACP63_PDM_DEV_MASK; + acp_data->pdev_count = ACP63_PDM_MODE_DEVS; + } + break; + } +} + static int snd_acp63_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) { @@ -183,6 +216,7 @@ static int snd_acp63_probe(struct pci_dev *pci, if (ret) goto release_regions; val = acp63_readl(adata->acp63_base + ACP_PIN_CONFIG); + get_acp63_device_config(val, pci, adata); switch (val) { case ACP_CONFIG_0: case ACP_CONFIG_1: @@ -195,14 +229,14 @@ static int snd_acp63_probe(struct pci_dev *pci, default: /* Checking DMIC hardware*/ - adev = acpi_find_child_device(ACPI_COMPANION(&pci->dev), 0x02, 0); + adev = acpi_find_child_device(ACPI_COMPANION(&pci->dev), ACP63_DMIC_ADDR, 0); if (!adev) break; if (!acpi_dev_get_property(adev, "acp-audio-device-type", ACPI_TYPE_INTEGER, &obj) && - obj->integer.value == 2) { + obj->integer.value == ACP_DMIC_DEV) { adata->res = devm_kzalloc(&pci->dev, sizeof(struct resource), GFP_KERNEL); if (!adata->res) { ret = -ENOMEM; -- 2.34.1

2 4

[PATCH 00/11] ASoC: SOF: Extend the IPC ops optionality
by Peter Ujfalusi 27 Dec '22

27 Dec '22

Hi, This series will extend the IPC ops optionality to cover it up to the existence of the top level ipc pointer itself. There is no functionality change. The reason for the extended optionality is that we have "DSPless" debug/development support coming up (currently it is in SOF's topic/sof-dev stable branch) initially supporting Intel's HDA platforms. As the name suggests, in this mode the DSP is completely ignored by the linux driver stack (no firmware loaded, only using HDA directly). The DSPless mode is aimed to help us to verify our Linux stack on new platforms where the firmware is not yet in the state that we can reliably use it, but the hardware and programming flows can be tested already. There is no plan to make DSPless a production target for SOF Linux stack. While this is preparatory series aimed to unblock the DSPless support, it has been integrated into sof-dev separately and we have lots of new features depending on it (went in between this set and the DSPless support). I still have some minor tasks to complete for the DSPless to make it a bit more versatile, but I don't want to block other, stable features for upstreaming. Regards, Peter --- Peter Ujfalusi (11): ASoC: SOF: sof-audio: Treat tplg_ops->route_setup() as optional ASoC: SOF: sof-audio: Update documentation for sof_ipc_tplg_ops ASoC: SOF: Add helper macro to be used to get an IPC ops ASoC: SOF: pcm: Extend the optionality of IPC ops to IPC as well ASoC: SOF: control: Extend the optionality of IPC ops to IPC as well ASoC: SOF: sof-audio: Extend the optionality of IPC ops to IPC as well ASoC: SOF: topology: Extend the optionality of IPC ops to IPC as well ASoC: SOF: pm: Extend the optionality of IPC ops to IPC as well ASoC: SOF: sof-priv: Mark fw_tracing ops optional in documentation ASoC: SOF: trace: Use sof_ipc_get_ops() in sof_fw_trace_init ASoC: SOF: trace: No need to check for op pointer in sof_fw_trace_free() sound/soc/sof/control.c | 44 +++++++++---------- sound/soc/sof/pcm.c | 18 ++++---- sound/soc/sof/pm.c | 12 +++--- sound/soc/sof/sof-audio.c | 57 +++++++++++++----------- sound/soc/sof/sof-audio.h | 6 ++- sound/soc/sof/sof-priv.h | 6 ++- sound/soc/sof/topology.c | 91 +++++++++++++++++++++++---------------- sound/soc/sof/trace.c | 8 ++-- 8 files changed, 138 insertions(+), 104 deletions(-) -- 2.39.0

2 12