- Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: ymfpci: Use u16 consistently for old_legacy_ctrl
by Tasos Sahanidis 29 Mar '23

29 Mar '23

There's no need to switch between unsigned short and u16, especially since all the functions that end up using old_legacy_ctrl specify u16 anyway. Signed-off-by: Tasos Sahanidis <tasos(a)tasossah.com> --- sound/pci/ymfpci/ymfpci.h | 4 ++-- sound/pci/ymfpci/ymfpci_main.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/pci/ymfpci/ymfpci.h b/sound/pci/ymfpci/ymfpci.h index 669687764..d11f9bf5a 100644 --- a/sound/pci/ymfpci/ymfpci.h +++ b/sound/pci/ymfpci/ymfpci.h @@ -276,7 +276,7 @@ struct snd_ymfpci { unsigned long reg_area_phys; void __iomem *reg_area_virt; - unsigned short old_legacy_ctrl; + u16 old_legacy_ctrl; #ifdef SUPPORT_JOYSTICK struct gameport *gameport; #endif @@ -355,7 +355,7 @@ struct snd_ymfpci { int snd_ymfpci_create(struct snd_card *card, struct pci_dev *pci, - unsigned short old_legacy_ctrl); + u16 old_legacy_ctrl); void snd_ymfpci_free_gameport(struct snd_ymfpci *chip); extern const struct dev_pm_ops snd_ymfpci_pm; diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c index 2858736ed..d44ecd916 100644 --- a/sound/pci/ymfpci/ymfpci_main.c +++ b/sound/pci/ymfpci/ymfpci_main.c @@ -2309,7 +2309,7 @@ SIMPLE_DEV_PM_OPS(snd_ymfpci_pm, snd_ymfpci_suspend, snd_ymfpci_resume); int snd_ymfpci_create(struct snd_card *card, struct pci_dev *pci, - unsigned short old_legacy_ctrl) + u16 old_legacy_ctrl) { struct snd_ymfpci *chip = card->private_data; int err; -- 2.25.1

2 1

[PATCH 0/4] ALSA: ymfpci: PM related cleanups and fixes
by Tasos Sahanidis 29 Mar '23

29 Mar '23

Hi, This series started while attempting to fix the OPL not being detected after restoring from S4 on a YMF744. While attempting to debug the issue, it was found that SIMPLE_DEV_PM_OPS was deprecated, and thus replaced, and a few cleanups were made along the way. Tasos Sahanidis (4): ALSA: ymfpci: Switch to DEFINE_SIMPLE_DEV_PM_OPS() ALSA: ymfpci: Move allocation of saved registers to struct snd_ymfpci ALSA: ymfpci: Store saved legacy registers in an array ALSA: ymfpci: Store additional legacy registers on suspend sound/pci/ymfpci/ymfpci.c | 4 +- sound/pci/ymfpci/ymfpci.h | 50 +++++++++++++++++++++--- sound/pci/ymfpci/ymfpci_main.c | 70 ++++++++++------------------------ 3 files changed, 66 insertions(+), 58 deletions(-) -- 2.25.1

2 5

[PATCH] ALSA: ymfpci: Add error messages for abritrary IO ports on older chips
by Tasos Sahanidis 29 Mar '23

29 Mar '23

As an end user, it can be confusing to request an arbitrary IO port be used only to find out that it doesn't work without an obvious reason, especially since /sys/module/snd_ymfpci/parameters/{fm,joystick,mpu}_port indicate 0 after the module has been loaded. In my case, I was unaware that the YMF724 did not support such usage, and thus ended up spending time attempting to debug the issue. Now, when a user attempts to request an IO port that isn't supported by the hardware, the following message is printed: [ 25.549530] snd_ymfpci 0000:06:05.0: The Yamaha DS-1 (YMF724F) does not support arbitrary IO ports for FM (requested 0x1234) Signed-off-by: Tasos Sahanidis <tasos(a)tasossah.com> --- sound/pci/ymfpci/ymfpci.c | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c index 1e198e4d5..de5dc5337 100644 --- a/sound/pci/ymfpci/ymfpci.c +++ b/sound/pci/ymfpci/ymfpci.c @@ -98,8 +98,10 @@ static int snd_ymfpci_create_gameport(struct snd_ymfpci *chip, int dev, case 0x204: legacy_ctrl2 |= 2 << 6; break; case 0x205: legacy_ctrl2 |= 3 << 6; break; default: - dev_err(chip->card->dev, - "invalid joystick port %#x", io_port); + if (io_port > 0) + dev_err(chip->card->dev, + "The %s does not support arbitrary IO ports for the game port (requested 0x%x)\n", + chip->card->shortname, (unsigned int)io_port); return -EINVAL; } } @@ -186,6 +188,13 @@ static int snd_card_ymfpci_probe(struct pci_dev *pci, default: model = str = "???"; break; } + strcpy(card->driver, str); + sprintf(card->shortname, "Yamaha %s (%s)", model, str); + sprintf(card->longname, "%s at 0x%lx, irq %i", + card->shortname, + chip->reg_area_phys, + chip->irq); + legacy_ctrl = 0; legacy_ctrl2 = 0x0800; /* SBEN = 0, SMOD = 01, LAD = 0 */ @@ -218,7 +227,13 @@ static int snd_card_ymfpci_probe(struct pci_dev *pci, case 0x398: legacy_ctrl2 |= 1; break; case 0x3a0: legacy_ctrl2 |= 2; break; case 0x3a8: legacy_ctrl2 |= 3; break; - default: fm_port[dev] = 0; break; + default: + if (fm_port[dev] > 0) + dev_err(card->dev, + "The %s does not support arbitrary IO ports for FM (requested 0x%x)\n", + card->shortname, (unsigned int)fm_port[dev]); + fm_port[dev] = 0; + break; } if (fm_port[dev] > 0) fm_res = devm_request_region(&pci->dev, fm_port[dev], @@ -234,7 +249,13 @@ static int snd_card_ymfpci_probe(struct pci_dev *pci, case 0x300: legacy_ctrl2 |= 1 << 4; break; case 0x332: legacy_ctrl2 |= 2 << 4; break; case 0x334: legacy_ctrl2 |= 3 << 4; break; - default: mpu_port[dev] = 0; break; + default: + if (mpu_port[dev] > 0) + dev_err(card->dev, + "The %s does not support arbitrary IO ports for MPU-401 (requested 0x%x)\n", + card->shortname, (unsigned int)mpu_port[dev]); + mpu_port[dev] = 0; + break; } if (mpu_port[dev] > 0) mpu_res = devm_request_region(&pci->dev, mpu_port[dev], @@ -257,12 +278,6 @@ static int snd_card_ymfpci_probe(struct pci_dev *pci, if (err < 0) return err; - strcpy(card->driver, str); - sprintf(card->shortname, "Yamaha %s (%s)", model, str); - sprintf(card->longname, "%s at 0x%lx, irq %i", - card->shortname, - chip->reg_area_phys, - chip->irq); err = snd_ymfpci_pcm(chip, 0); if (err < 0) return err; -- 2.25.1

2 1

[PATCH] ALSA: ymfpci: Fix BUG_ON in probe function
by Tasos Sahanidis 29 Mar '23

29 Mar '23

The snd_dma_buffer.bytes field now contains the aligned size, which this snd_BUG_ON() did not account for, resulting in the following: [ 9.625915] ------------[ cut here ]------------ [ 9.633440] WARNING: CPU: 0 PID: 126 at sound/pci/ymfpci/ymfpci_main.c:2168 snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.648926] Modules linked in: snd_ymfpci(+) snd_intel_dspcfg kvm(+) snd_intel_sdw_acpi snd_ac97_codec snd_mpu401_uart snd_opl3_lib irqbypass snd_hda_codec gameport snd_rawmidi crct10dif_pclmul crc32_pclmul cfg80211 snd_hda_core polyval_clmulni polyval_generic gf128mul snd_seq_device ghash_clmulni_intel snd_hwdep ac97_bus sha512_ssse3 rfkill snd_pcm aesni_intel tg3 snd_timer crypto_simd snd mxm_wmi libphy cryptd k10temp fam15h_power pcspkr soundcore sp5100_tco wmi acpi_cpufreq mac_hid dm_multipath sg loop fuse dm_mod bpf_preload ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 sr_mod cdrom ata_generic pata_acpi firewire_ohci crc32c_intel firewire_core xhci_pci crc_itu_t pata_via xhci_pci_renesas floppy [ 9.711849] CPU: 0 PID: 126 Comm: kworker/0:2 Not tainted 6.1.21-1-lts #1 08d2e5ece03136efa7c6aeea9a9c40916b1bd8da [ 9.722200] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 9.732204] Workqueue: events work_for_cpu_fn [ 9.736580] RIP: 0010:snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.742594] Code: 8c c0 4c 89 e2 48 89 df 48 c7 c6 92 c6 8c c0 e8 15 d0 e9 ff 48 83 c4 08 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f e9 d3 7a 33 e3 <0f> 0b e9 cb fd ff ff 41 bd fb ff ff ff eb db 41 bd f4 ff ff ff eb [ 9.761358] RSP: 0018:ffffab64804e7da0 EFLAGS: 00010287 [ 9.766594] RAX: ffff8fa2df06c400 RBX: ffff8fa3073a8000 RCX: ffff8fa303fbc4a8 [ 9.773734] RDX: ffff8fa2df06d000 RSI: 0000000000000010 RDI: 0000000000000020 [ 9.780876] RBP: ffff8fa300b5d0d0 R08: ffff8fa3073a8e50 R09: 00000000df06bf00 [ 9.788018] R10: ffff8fa2df06bf00 R11: 00000000df068200 R12: ffff8fa3073a8918 [ 9.795159] R13: 0000000000000000 R14: 0000000000000080 R15: ffff8fa2df068200 [ 9.802317] FS: 0000000000000000(0000) GS:ffff8fa9fec00000(0000) knlGS:0000000000000000 [ 9.810414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.816158] CR2: 000055febaf66500 CR3: 0000000101a2e000 CR4: 00000000000406f0 [ 9.823301] Call Trace: [ 9.825747] <TASK> [ 9.827889] snd_card_ymfpci_probe+0x194/0x950 [snd_ymfpci b78a5fe64b5663a6390a909c67808567e3e73615] [ 9.837030] ? finish_task_switch.isra.0+0x90/0x2d0 [ 9.841918] local_pci_probe+0x45/0x80 [ 9.845680] work_for_cpu_fn+0x1a/0x30 [ 9.849431] process_one_work+0x1c7/0x380 [ 9.853464] worker_thread+0x1af/0x390 [ 9.857225] ? rescuer_thread+0x3b0/0x3b0 [ 9.861254] kthread+0xde/0x110 [ 9.864414] ? kthread_complete_and_exit+0x20/0x20 [ 9.869210] ret_from_fork+0x22/0x30 [ 9.872792] </TASK> [ 9.874985] ---[ end trace 0000000000000000 ]--- Fixes: 5c1733e33c88 ("ALSA: memalloc: Align buffer allocations in page size") Signed-off-by: Tasos Sahanidis <tasos(a)tasossah.com> --- sound/pci/ymfpci/ymfpci_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c index 2858736ed..912ab0b21 100644 --- a/sound/pci/ymfpci/ymfpci_main.c +++ b/sound/pci/ymfpci/ymfpci_main.c @@ -2160,7 +2160,7 @@ static int snd_ymfpci_memalloc(struct snd_ymfpci *chip) chip->work_base = ptr; chip->work_base_addr = ptr_addr; - snd_BUG_ON(ptr + chip->work_size != + snd_BUG_ON(ptr + PAGE_ALIGN(chip->work_size) != chip->work_ptr->area + chip->work_ptr->bytes); snd_ymfpci_writel(chip, YDSXGR_PLAYCTRLBASE, chip->bank_base_playback_addr); -- 2.25.1

2 1

[PATCH] ALSA: ymfpci: Create card with device-managed snd_devm_card_new()
by Tasos Sahanidis 29 Mar '23

29 Mar '23

snd_card_ymfpci_remove() was removed in commit c6e6bb5eab74 ("ALSA: ymfpci: Allocate resources with device-managed APIs"), but the call to snd_card_new() was not replaced with snd_devm_card_new(). Since there was no longer a call to snd_card_free, unloading the module would eventually result in Oops: [697561.532887] BUG: unable to handle page fault for address: ffffffffc0924480 [697561.532893] #PF: supervisor read access in kernel mode [697561.532896] #PF: error_code(0x0000) - not-present page [697561.532899] PGD ae1e15067 P4D ae1e15067 PUD ae1e17067 PMD 11a8f5067 PTE 0 [697561.532905] Oops: 0000 [#1] PREEMPT SMP NOPTI [697561.532909] CPU: 21 PID: 5080 Comm: wireplumber Tainted: G W OE 6.2.7 #1 [697561.532914] Hardware name: System manufacturer System Product Name/TUF GAMING X570-PLUS, BIOS 4408 10/28/2022 [697561.532916] RIP: 0010:try_module_get.part.0+0x1a/0xe0 [697561.532924] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc bf 01 00 00 00 e8 56 3c f8 ff <41> 83 3c 24 02 0f 84 96 00 00 00 41 8b 84 24 30 03 00 00 85 c0 0f [697561.532927] RSP: 0018:ffffbe9b858c3bd8 EFLAGS: 00010246 [697561.532930] RAX: ffff9815d14f1900 RBX: ffff9815c14e6000 RCX: 0000000000000000 [697561.532933] RDX: 0000000000000000 RSI: ffffffffc055092c RDI: ffffffffb3778c1a [697561.532935] RBP: ffffbe9b858c3be8 R08: 0000000000000040 R09: ffff981a1a741380 [697561.532937] R10: ffffbe9b858c3c80 R11: 00000009d56533a6 R12: ffffffffc0924480 [697561.532939] R13: ffff9823439d8500 R14: 0000000000000025 R15: ffff9815cd109f80 [697561.532942] FS: 00007f13084f1f80(0000) GS:ffff9824aef40000(0000) knlGS:0000000000000000 [697561.532945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [697561.532947] CR2: ffffffffc0924480 CR3: 0000000145344000 CR4: 0000000000350ee0 [697561.532949] Call Trace: [697561.532951] <TASK> [697561.532955] try_module_get+0x13/0x30 [697561.532960] snd_ctl_open+0x61/0x1c0 [snd] [697561.532976] snd_open+0xb4/0x1e0 [snd] [697561.532989] chrdev_open+0xc7/0x240 [697561.532995] ? fsnotify_perm.part.0+0x6e/0x160 [697561.533000] ? __pfx_chrdev_open+0x10/0x10 [697561.533005] do_dentry_open+0x169/0x440 [697561.533009] vfs_open+0x2d/0x40 [697561.533012] path_openat+0xa9d/0x10d0 [697561.533017] ? debug_smp_processor_id+0x17/0x20 [697561.533022] ? trigger_load_balance+0x65/0x370 [697561.533026] do_filp_open+0xb2/0x160 [697561.533032] ? _raw_spin_unlock+0x19/0x40 [697561.533036] ? alloc_fd+0xa9/0x190 [697561.533040] do_sys_openat2+0x9f/0x160 [697561.533044] __x64_sys_openat+0x55/0x90 [697561.533048] do_syscall_64+0x3b/0x90 [697561.533052] entry_SYSCALL_64_after_hwframe+0x72/0xdc [697561.533056] RIP: 0033:0x7f1308a40db4 [697561.533059] Code: 24 20 eb 8f 66 90 44 89 54 24 0c e8 46 68 f8 ff 44 8b 54 24 0c 44 89 e2 48 89 ee 41 89 c0 bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 32 44 89 c7 89 44 24 0c e8 78 68 f8 ff 8b 44 [697561.533062] RSP: 002b:00007ffcce664450 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [697561.533066] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1308a40db4 [697561.533068] RDX: 0000000000080000 RSI: 00007ffcce664690 RDI: 00000000ffffff9c [697561.533070] RBP: 00007ffcce664690 R08: 0000000000000000 R09: 0000000000000012 [697561.533072] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000080000 [697561.533074] R13: 00007f13054b069b R14: 0000565209f83200 R15: 0000000000000000 [697561.533078] </TASK> Fixes: c6e6bb5eab74 ("ALSA: ymfpci: Allocate resources with device-managed APIs") Signed-off-by: Tasos Sahanidis <tasos(a)tasossah.com> --- sound/pci/ymfpci/ymfpci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c index 1e198e4d5..82d4e0fda 100644 --- a/sound/pci/ymfpci/ymfpci.c +++ b/sound/pci/ymfpci/ymfpci.c @@ -170,7 +170,7 @@ static int snd_card_ymfpci_probe(struct pci_dev *pci, return -ENOENT; } - err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE, + err = snd_devm_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE, sizeof(*chip), &card); if (err < 0) return err; -- 2.25.1

2 1

[PATCH v2 0/4] ASoC: remove unnecessary dai_link->platform
by Kuninori Morimoto 29 Mar '23

29 Mar '23

Hi Mark Current ASoC will ignore already connected component when binding Card. This will happen mainly "CPU Component" is handled as "Platform Component", which was needed before. static int snd_soc_rtd_add_component(...) { ... for_each_rtd_components(rtd, i, comp) { /* already connected */ if (comp == component) return 0; } ... } Some drivers are still using CPU or Dummy Component as Platform Component, but these are no meaning or ignored. This patch-set remove these. v1 -> v2 - remove the patch for simple-card - remove extra simple-card patch - add Acked-by for atmel patch Link: https://lore.kernel.org/r/878rfyjz4p.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (4): ASoC: fsl: remove unnecessary dai_link->platform ASoC: atmel: remove unnecessary dai_link->platform ASoC: ti: remove unnecessary dai_link->platform ASoC: soc-topology.c: remove unnecessary dai_link->platform sound/soc/atmel/atmel-classd.c | 5 +---- sound/soc/atmel/atmel-pdmic.c | 5 +---- sound/soc/fsl/imx-audmix.c | 14 ++++---------- sound/soc/fsl/imx-spdif.c | 5 +---- sound/soc/soc-topology.c | 8 ++------ sound/soc/ti/omap-hdmi.c | 5 +---- 6 files changed, 10 insertions(+), 32 deletions(-) -- 2.25.1

3 9

[PATCH v2 1/9] ASoC: dt-bindings: qcom,lpass-rx-macro: narrow clocks per variants
by Krzysztof Kozlowski 28 Mar '23

28 Mar '23

Currently the Qualcomm RX macro codec binding allows two different clock setups - with (for ADSP) and without macro/dcodec entries (for ADSP bypassed). With more devices coming soon, this will keep growing, thus rework the clocks/clock-names to be specific for each binding. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- .../bindings/sound/qcom,lpass-rx-macro.yaml | 58 ++++++++++++++----- 1 file changed, 44 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index b0b95689d78b..8b3d617a9578 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -9,9 +9,6 @@ title: LPASS(Low Power Audio Subsystem) RX Macro audio codec maintainers: - Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> -allOf: - - $ref: dai-common.yaml# - properties: compatible: enum: @@ -34,17 +31,8 @@ properties: maxItems: 5 clock-names: - oneOf: - - items: #for ADSP based platforms - - const: mclk - - const: npl - - const: macro - - const: dcodec - - const: fsgen - - items: #for ADSP bypass based platforms - - const: mclk - - const: npl - - const: fsgen + minItems: 3 + maxItems: 5 clock-output-names: maxItems: 1 @@ -62,6 +50,48 @@ required: - reg - "#sound-dai-cells" +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + enum: + - qcom,sc7280-lpass-rx-macro + then: + properties: + clock-names: + oneOf: + - items: #for ADSP based platforms + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: fsgen + - items: #for ADSP bypass based platforms + - const: mclk + - const: npl + - const: fsgen + + - if: + properties: + compatible: + enum: + - qcom,sc8280xp-lpass-rx-macro + - qcom,sm8250-lpass-rx-macro + - qcom,sm8450-lpass-rx-macro + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: mclk + - const: npl + - const: macro + - const: dcodec + - const: fsgen + unevaluatedProperties: false examples: -- 2.34.1

3 16

Headphone jack volume on ALC287 (Thinkpad X1 extreme gen 5) is too low unless the speaker channel's volume is past a certain threshold.
by GitHub issues - edited 28 Mar '23

28 Mar '23

alsa-project/alsa-ucm-conf issue #298 was edited from Noted-Jrelvas: First of all, apologies for the verbose title. I've ran into a very interesting issue with my Thinkpad X1 extreme gen 5's audio. For whatever reason, the headphone jack's sound output is very quiet unless I raise the speaker channel's volume past a certain threshold. The headphone jack sounds very quiet... ![image](https://user-images.githubusercontent.com/55360900/228303084-57945125-59ba-4daf-befb-bb9e18b6f491.png) ...but raising the speaker channel's volume fixes the issue: ![image](https://user-images.githubusercontent.com/55360900/228303657-30efa3c3-2965-4b3b-a870-b4ae6e803aba.png) I suggest automatically setting the speaker channel's volume to 100% when the headphones are plugged in and restoring it to its original volume once they're plugged out. Here's the output given by `alsa-info.sh`: http://alsa-project.org/db/?f=21904435b29e0eb23d2d0b30bbabe15734df7ad7 Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/298 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Headphone jack volume on ALC287 (Thinkpad X1 extreme gen 5) is too low unless the speaker volume channel is past a certain threshold.
by GitHub issues - opened 28 Mar '23

28 Mar '23

alsa-project/alsa-ucm-conf issue #298 was opened from Noted-Jrelvas: First of all, apologies for the verbose title. I've ran into a very interesting issue with my Thinkpad X1 extreme gen 5's audio. For whatever reason, the headphone jack's sound output is very quiet unless I raise the speaker channel's volume past a certain threshold. The headphone jack sounds very quiet... ![image](https://user-images.githubusercontent.com/55360900/228303084-57945125-59ba-4daf-befb-bb9e18b6f491.png) ...but raising the speaker channel's volume fixes the issue: ![image](https://user-images.githubusercontent.com/55360900/228303657-30efa3c3-2965-4b3b-a870-b4ae6e803aba.png) I suggest automatically setting the speaker channel's volume to 100% when the headphones are plugged in and restoring it to its original volume once they're plugged out. Here's the output given by `alsa-info.sh`: http://alsa-project.org/db/?f=21904435b29e0eb23d2d0b30bbabe15734df7ad7 Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/298 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] ASoC: dt-bindings: maxim,max9867: fix example
by Richard Leitner 28 Mar '23

28 Mar '23

Remove the common clock node from the example as suggested by Krzysztof Kozlowski in [1]. [1] https://lore.kernel.org/lkml/45d306d3-8efb-12ac-0a83-f01ca2982b0a@linaro.or… Signed-off-by: Richard Leitner <richard.leitner(a)linux.dev> --- Documentation/devicetree/bindings/sound/maxim,max9867.yaml | 6 ------ 1 file changed, 6 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/maxim,max9867.yaml b/Documentation/devicetree/bindings/sound/maxim,max9867.yaml index 6f27029b137d..0b9a84d33b6c 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max9867.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max9867.yaml @@ -57,10 +57,4 @@ examples: clocks = <&codec_clk>; }; }; - - codec_clk: clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12288000>; - }; ... --- base-commit: ad58151fa04280a938c173bcba05ba42a4073d92 change-id: 20230328-max9867_dt_example_fix-e136f2a4da25 Best regards, -- Richard Leitner <richard.leitner(a)linux.dev>

3 2