- Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablement
by Takashi Iwai 04 Apr '23

04 Apr '23

When a DRM driver turns on or off the screen with the audio capability, it notifies the ELD to HD-audio HDMI codec driver via component ops. HDMI codec driver, in turn, attaches or detaches the PCM stream for the given port on the fly. The problem is that, since the recent code change, the HDMI driver always treats the PCM stream assignment dynamically; this ended up the confusion of the PCM device appearance. e.g. when a screen goes once off and on again, it may appear on a different PCM device before the screen-off. Although the application should treat such a change, it doesn't seem working gracefully with the current pipewire (maybe PulseAudio, too). As a workaround, this patch changes the HDMI codec driver behavior slightly to be more consistent. Now it remembers the previous PCM slot for the given port and try to assign to it. That is, if a port is re-enabled, the driver tries to use the same PCM slot that was assigned to that port previously. If it conflicts, a new slot is searched and used like before, instead. Fixes: ef6f5494faf6 ("ALSA: hda/hdmi: Use only dynamic PCM device allocation") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217259 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_hdmi.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 9ea633fe9339..90352dbc8052 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -81,6 +81,7 @@ struct hdmi_spec_per_pin { struct delayed_work work; struct hdmi_pcm *pcm; /* pointer to spec->pcm_rec[n] dynamically*/ int pcm_idx; /* which pcm is attached. -1 means no pcm is attached */ + int prev_pcm_idx; /* previously assigned pcm index */ int repoll_count; bool setup; /* the stream has been set up by prepare callback */ bool silent_stream; @@ -1380,9 +1381,17 @@ static void hdmi_attach_hda_pcm(struct hdmi_spec *spec, /* pcm already be attached to the pin */ if (per_pin->pcm) return; + /* try the previously used slot at first */ + idx = per_pin->prev_pcm_idx; + if (idx >= 0) { + if (!test_bit(idx, &spec->pcm_bitmap)) + goto found; + per_pin->prev_pcm_idx = -1; /* no longer valid, clear it */ + } idx = hdmi_find_pcm_slot(spec, per_pin); if (idx == -EBUSY) return; + found: per_pin->pcm_idx = idx; per_pin->pcm = get_hdmi_pcm(spec, idx); set_bit(idx, &spec->pcm_bitmap); @@ -1399,6 +1408,7 @@ static void hdmi_detach_hda_pcm(struct hdmi_spec *spec, idx = per_pin->pcm_idx; per_pin->pcm_idx = -1; per_pin->pcm = NULL; + per_pin->prev_pcm_idx = idx; if (idx >= 0 && idx < spec->pcm_used) clear_bit(idx, &spec->pcm_bitmap); } @@ -1924,6 +1934,7 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) per_pin->pcm = NULL; per_pin->pcm_idx = -1; + per_pin->prev_pcm_idx = -1; per_pin->pin_nid = pin_nid; per_pin->pin_nid_idx = spec->num_nids; per_pin->dev_id = i; -- 2.35.3

3 7

topology: nhlt: ssp-nhlt: Set link clock source based on bclk_freq
by GitHub pull_request - opened 04 Apr '23

04 Apr '23

alsa-project/alsa-utils pull request #198 was opened from ranj063: There is no need to set this in topology as this can be derived based on whether the bit clock frequency is derived from 19.2MHz or 24.576MHz. Request URL : https://github.com/alsa-project/alsa-utils/pull/198 Patch URL : https://github.com/alsa-project/alsa-utils/pull/198.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH v2] kselftest/alsa: Increase kselftest timeout
by Nícolas F. R. A. Prado 04 Apr '23

04 Apr '23

The default timeout for kselftests is 45 seconds, but that isn't enough time to run pcm-test when there are many PCMs on the device, nor for mixer-test when slower control buses and fancier CODECs are present. As data points, running pcm-test on mt8192-asurada-spherion takes about 1m15s, and mixer-test on rk3399-gru-kevin takes about 2m. Set the timeout to 4 minutes to allow both pcm-test and mixer-test to run to completion with some slack. Reviewed-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- Changes in v2: - Reduced timeout from 10 to 4 minutes - Tweaked commit message to also mention mixer-test and run time for mixer-test on rk3399-gru-kevin tools/testing/selftests/alsa/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/alsa/settings diff --git a/tools/testing/selftests/alsa/settings b/tools/testing/selftests/alsa/settings new file mode 100644 index 000000000000..b478e684846a --- /dev/null +++ b/tools/testing/selftests/alsa/settings @@ -0,0 +1 @@ +timeout=240 -- 2.39.0

3 3

[PATCH] ASoC: mediatek: mt8186: Move some prints to debug level
by Allen-KH Cheng 03 Apr '23

03 Apr '23

There are many log messages scattered throughout the mt8186 sound drivers, and they are frequently triggered. To avoid spamming the console, move these messages to the debug level. Signed-off-by: Allen-KH Cheng <allen-kh.cheng(a)mediatek.com> --- sound/soc/mediatek/mt8186/mt8186-afe-gpio.c | 26 +++++++++---------- sound/soc/mediatek/mt8186/mt8186-dai-adda.c | 4 +-- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 6 ++--- 4 files changed, 19 insertions(+), 19 deletions(-) diff --git a/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c index eda913fa147a..20b9f5d810ec 100644 --- a/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c +++ b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c @@ -85,7 +85,7 @@ int mt8186_afe_gpio_init(struct device *dev) aud_gpios[i].name); if (IS_ERR(aud_gpios[i].gpioctrl)) { ret = PTR_ERR(aud_gpios[i].gpioctrl); - dev_info(dev, "%s(), pinctrl_lookup_state %s fail, ret %d\n", + dev_dbg(dev, "%s(), pinctrl_lookup_state %s fail, ret %d\n", __func__, aud_gpios[i].name, ret); } else { aud_gpios[i].gpio_prepare = true; @@ -108,13 +108,13 @@ static int mt8186_afe_gpio_select(struct device *dev, int ret = 0; if (type < 0 || type >= MT8186_AFE_GPIO_GPIO_NUM) { - dev_err(dev, "%s(), error, invalid gpio type %d\n", + dev_dbg(dev, "%s(), error, invalid gpio type %d\n", __func__, type); return -EINVAL; } if (!aud_gpios[type].gpio_prepare) { - dev_err(dev, "%s(), error, gpio type %d not prepared\n", + dev_dbg(dev, "%s(), error, gpio type %d not prepared\n", __func__, type); return -EIO; } @@ -122,7 +122,7 @@ static int mt8186_afe_gpio_select(struct device *dev, ret = pinctrl_select_state(aud_pinctrl, aud_gpios[type].gpioctrl); if (ret) { - dev_err(dev, "%s(), error, can not set gpio type %d\n", + dev_dbg(dev, "%s(), error, can not set gpio type %d\n", __func__, type); return ret; } @@ -137,25 +137,25 @@ static int mt8186_afe_gpio_adda_dl(struct device *dev, bool enable) if (enable) { ret = mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_CLK_MOSI_ON); if (ret) { - dev_err(dev, "%s(), MOSI CLK ON select fail!\n", __func__); + dev_dbg(dev, "%s(), MOSI CLK ON select fail!\n", __func__); return ret; } ret = mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_DAT_MOSI_ON); if (ret) { - dev_err(dev, "%s(), MOSI DAT ON select fail!\n", __func__); + dev_dbg(dev, "%s(), MOSI DAT ON select fail!\n", __func__); return ret; } } else { ret = mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_DAT_MOSI_OFF); if (ret) { - dev_err(dev, "%s(), MOSI DAT OFF select fail!\n", __func__); + dev_dbg(dev, "%s(), MOSI DAT OFF select fail!\n", __func__); return ret; } ret = mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_CLK_MOSI_OFF); if (ret) { - dev_err(dev, "%s(), MOSI CLK ON select fail!\n", __func__); + dev_dbg(dev, "%s(), MOSI CLK ON select fail!\n", __func__); return ret; } } @@ -170,25 +170,25 @@ static int mt8186_afe_gpio_adda_ul(struct device *dev, bool enable) if (enable) { ret = mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_CLK_MISO_ON); if (ret) { - dev_err(dev, "%s(), MISO CLK ON select fail!\n", __func__); + dev_dbg(dev, "%s(), MISO CLK ON select fail!\n", __func__); return ret; } ret = mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_DAT_MISO_ON); if (ret) { - dev_err(dev, "%s(), MISO DAT ON select fail!\n", __func__); + dev_dbg(dev, "%s(), MISO DAT ON select fail!\n", __func__); return ret; } } else { ret = mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_DAT_MISO_OFF); if (ret) { - dev_err(dev, "%s(), MISO DAT OFF select fail!\n", __func__); + dev_dbg(dev, "%s(), MISO DAT OFF select fail!\n", __func__); return ret; } ret = mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_CLK_MISO_OFF); if (ret) { - dev_err(dev, "%s(), MISO CLK OFF select fail!\n", __func__); + dev_dbg(dev, "%s(), MISO CLK OFF select fail!\n", __func__); return ret; } } @@ -230,7 +230,7 @@ int mt8186_afe_gpio_request(struct device *dev, bool enable, sel = enable ? MT8186_AFE_GPIO_PCM_ON : MT8186_AFE_GPIO_PCM_OFF; break; default: - dev_err(dev, "%s(), invalid dai %d\n", __func__, dai); + dev_dbg(dev, "%s(), invalid dai %d\n", __func__, dai); goto unlock; } diff --git a/sound/soc/mediatek/mt8186/mt8186-dai-adda.c b/sound/soc/mediatek/mt8186/mt8186-dai-adda.c index 094402470dc2..247ab8df941f 100644 --- a/sound/soc/mediatek/mt8186/mt8186-dai-adda.c +++ b/sound/soc/mediatek/mt8186/mt8186-dai-adda.c @@ -110,7 +110,7 @@ static unsigned int adda_dl_rate_transform(struct mtk_base_afe *afe, case 192000: return MTK_AFE_ADDA_DL_RATE_192K; default: - dev_info(afe->dev, "%s(), rate %d invalid, use 48kHz!!!\n", + dev_dbg(afe->dev, "%s(), rate %d invalid, use 48kHz!!!\n", __func__, rate); } @@ -134,7 +134,7 @@ static unsigned int adda_ul_rate_transform(struct mtk_base_afe *afe, case 192000: return MTK_AFE_ADDA_UL_RATE_192K; default: - dev_info(afe->dev, "%s(), rate %d invalid, use 48kHz!!!\n", + dev_dbg(afe->dev, "%s(), rate %d invalid, use 48kHz!!!\n", __func__, rate); } diff --git a/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c b/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c index 970b980a81e6..cdf54d1eb50d 100644 --- a/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c +++ b/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c @@ -1061,7 +1061,7 @@ static int mt8186_mt6366_da7219_max98357_dev_probe(struct platform_device *pdev) card->name = card->topology_shortname; sof_on = 1; } else { - dev_info(&pdev->dev, "Probe without adsp\n"); + dev_dbg(&pdev->dev, "Probe without adsp\n"); } if (of_property_read_bool(pdev->dev.of_node, "mediatek,dai-link")) { diff --git a/sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.c b/sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.c index b333950aa3c3..7538274641fd 100644 --- a/sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.c +++ b/sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.c @@ -95,7 +95,7 @@ static int dmic_set(struct snd_kcontrol *kcontrol, priv->dmic_switch = ucontrol->value.integer.value[0]; if (priv->dmic_sel) { gpiod_set_value(priv->dmic_sel, priv->dmic_switch); - dev_info(dapm->card->dev, "dmic_set_value %d\n", + dev_dbg(dapm->card->dev, "dmic_set_value %d\n", priv->dmic_switch); } return 0; @@ -139,7 +139,7 @@ static int primary_codec_init(struct snd_soc_pcm_runtime *rtd) } if (!priv->dmic_sel) { - dev_info(card->dev, "dmic_sel is null\n"); + dev_dbg(card->dev, "dmic_sel is null\n"); return 0; } @@ -1152,7 +1152,7 @@ static int mt8186_mt6366_rt1019_rt5682s_dev_probe(struct platform_device *pdev) card->name = card->topology_shortname; sof_on = 1; } else { - dev_info(&pdev->dev, "Probe without adsp\n"); + dev_dbg(&pdev->dev, "Probe without adsp\n"); } if (of_property_read_bool(pdev->dev.of_node, "mediatek,dai-link")) { -- 2.18.0

2 1

[PATCH v2] firmware: cs_dsp: Add a debugfs entry containing control details
by Richard Fitzgerald 03 Apr '23

03 Apr '23

From: Simon Trimmer <simont(a)opensource.cirrus.com> The file named 'controls' in the DSP's debugfs root contains a formatted table describing the controls defined within the loaded DSP firmware, it is of the form name: len region:offset addr fwname algid ctltype flags en dirty Where flags is represented as a character for each flag if set, or '-', enabled is whether the control is enabled or disabled and dirty is whether the control value is set in the cache but not the hardware. Signed-off-by: Simon Trimmer <simont(a)opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/firmware/cirrus/cs_dsp.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/firmware/cirrus/cs_dsp.c b/drivers/firmware/cirrus/cs_dsp.c index 513136a924cf..e4ccfb6a8fa5 100644 --- a/drivers/firmware/cirrus/cs_dsp.c +++ b/drivers/firmware/cirrus/cs_dsp.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/moduleparam.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/vmalloc.h> @@ -457,6 +458,33 @@ static const struct { }, }; +static int cs_dsp_coeff_base_reg(struct cs_dsp_coeff_ctl *ctl, unsigned int *reg, + unsigned int off); + +static int cs_dsp_debugfs_read_controls_show(struct seq_file *s, void *ignored) +{ + struct cs_dsp *dsp = s->private; + struct cs_dsp_coeff_ctl *ctl; + unsigned int reg; + + list_for_each_entry(ctl, &dsp->ctl_list, list) { + cs_dsp_coeff_base_reg(ctl, &reg, 0); + seq_printf(s, "%22.*s: %#8zx %s:%08x %#8x %s %#8x %#4x %c%c%c%c %s %s\n", + ctl->subname_len, ctl->subname, ctl->len, + cs_dsp_mem_region_name(ctl->alg_region.type), + ctl->offset, reg, ctl->fw_name, ctl->alg_region.alg, ctl->type, + ctl->flags & WMFW_CTL_FLAG_VOLATILE ? 'V' : '-', + ctl->flags & WMFW_CTL_FLAG_SYS ? 'S' : '-', + ctl->flags & WMFW_CTL_FLAG_READABLE ? 'R' : '-', + ctl->flags & WMFW_CTL_FLAG_WRITEABLE ? 'W' : '-', + ctl->enabled ? "enabled" : "disabled", + ctl->set ? "dirty" : "clean"); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(cs_dsp_debugfs_read_controls); + /** * cs_dsp_init_debugfs() - Create and populate DSP representation in debugfs * @dsp: pointer to DSP structure @@ -479,6 +507,9 @@ void cs_dsp_init_debugfs(struct cs_dsp *dsp, struct dentry *debugfs_root) debugfs_create_file(cs_dsp_debugfs_fops[i].name, 0444, root, dsp, &cs_dsp_debugfs_fops[i].fops); + debugfs_create_file("controls", 0444, root, dsp, + &cs_dsp_debugfs_read_controls_fops); + dsp->debugfs_root = root; } EXPORT_SYMBOL_NS_GPL(cs_dsp_init_debugfs, FW_CS_DSP); -- 2.30.2

2 1

[PATCH 1/6] ASoC: SOF: amd: remove unused code
by Vijendar Mukunda 03 Apr '23

03 Apr '23

During initial SOF driver bring up on AMD platforms, only DMIC support was added. As of today, we have a complete SOF solution for I2S endpoints along with DMIC endpoint. This code is no longer required. Remove unused code from RMB and RN platform ACP PCI driver. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- sound/soc/sof/amd/pci-rmb.c | 70 +------------------------------------ sound/soc/sof/amd/pci-rn.c | 70 +------------------------------------ 2 files changed, 2 insertions(+), 138 deletions(-) diff --git a/sound/soc/sof/amd/pci-rmb.c b/sound/soc/sof/amd/pci-rmb.c index 4e1de462b431..d0a56e8f09c0 100644 --- a/sound/soc/sof/amd/pci-rmb.c +++ b/sound/soc/sof/amd/pci-rmb.c @@ -27,22 +27,6 @@ #define ACP6x_REG_END 0x125C000 static struct platform_device *dmic_dev; -static struct platform_device *pdev; - -static const struct resource rembrandt_res[] = { - { - .start = 0, - .end = ACP6x_REG_END - ACP6x_REG_START, - .name = "acp_mem", - .flags = IORESOURCE_MEM, - }, - { - .start = 0, - .end = 0, - .name = "acp_dai_irq", - .flags = IORESOURCE_IRQ, - }, -}; static const struct sof_amd_acp_desc rembrandt_chip_info = { .rev = 6, @@ -83,11 +67,8 @@ static const struct sof_dev_desc rembrandt_desc = { static int acp_pci_rmb_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) { - struct platform_device_info pdevinfo; struct device *dev = &pci->dev; - const struct resource *res_i2s; - struct resource *res; - unsigned int flag, i, addr; + unsigned int flag; int ret; flag = snd_amd_acp_find_config(pci); @@ -104,53 +85,6 @@ static int acp_pci_rmb_probe(struct pci_dev *pci, const struct pci_device_id *pc sof_pci_remove(pci); return PTR_ERR(dmic_dev); } - - /* Register platform device only if flag set to FLAG_AMD_SOF_ONLY_DMIC */ - if (flag != FLAG_AMD_SOF_ONLY_DMIC) - return 0; - - addr = pci_resource_start(pci, 0); - res = devm_kzalloc(&pci->dev, sizeof(struct resource) * ARRAY_SIZE(rembrandt_res), - GFP_KERNEL); - if (!res) { - platform_device_unregister(dmic_dev); - sof_pci_remove(pci); - return -ENOMEM; - } - - res_i2s = rembrandt_res; - for (i = 0; i < ARRAY_SIZE(rembrandt_res); i++, res_i2s++) { - res[i].name = res_i2s->name; - res[i].flags = res_i2s->flags; - res[i].start = addr + res_i2s->start; - res[i].end = addr + res_i2s->end; - if (res_i2s->flags == IORESOURCE_IRQ) { - res[i].start = pci->irq; - res[i].end = res[i].start; - } - } - - memset(&pdevinfo, 0, sizeof(pdevinfo)); - - /* - * We have common PCI driver probe for ACP device but we have to support I2S without SOF - * for some distributions. Register platform device that will be used to support non dsp - * ACP's audio ends points on some machines. - */ - pdevinfo.name = "acp_asoc_rembrandt"; - pdevinfo.id = 0; - pdevinfo.parent = &pci->dev; - pdevinfo.num_res = ARRAY_SIZE(rembrandt_res); - pdevinfo.res = &res[0]; - - pdev = platform_device_register_full(&pdevinfo); - if (IS_ERR(pdev)) { - dev_err(&pci->dev, "cannot register %s device\n", pdevinfo.name); - platform_device_unregister(dmic_dev); - sof_pci_remove(pci); - ret = PTR_ERR(pdev); - } - return ret; }; @@ -158,8 +92,6 @@ static void acp_pci_rmb_remove(struct pci_dev *pci) { if (dmic_dev) platform_device_unregister(dmic_dev); - if (pdev) - platform_device_unregister(pdev); sof_pci_remove(pci); } diff --git a/sound/soc/sof/amd/pci-rn.c b/sound/soc/sof/amd/pci-rn.c index fca40b261671..faab4c33a24d 100644 --- a/sound/soc/sof/amd/pci-rn.c +++ b/sound/soc/sof/amd/pci-rn.c @@ -27,22 +27,6 @@ #define ACP3x_REG_END 0x125C000 static struct platform_device *dmic_dev; -static struct platform_device *pdev; - -static const struct resource renoir_res[] = { - { - .start = 0, - .end = ACP3x_REG_END - ACP3x_REG_START, - .name = "acp_mem", - .flags = IORESOURCE_MEM, - }, - { - .start = 0, - .end = 0, - .name = "acp_dai_irq", - .flags = IORESOURCE_IRQ, - }, -}; static const struct sof_amd_acp_desc renoir_chip_info = { .rev = 3, @@ -83,11 +67,8 @@ static const struct sof_dev_desc renoir_desc = { static int acp_pci_rn_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) { - struct platform_device_info pdevinfo; struct device *dev = &pci->dev; - const struct resource *res_i2s; - struct resource *res; - unsigned int flag, i, addr; + unsigned int flag; int ret; flag = snd_amd_acp_find_config(pci); @@ -104,53 +85,6 @@ static int acp_pci_rn_probe(struct pci_dev *pci, const struct pci_device_id *pci sof_pci_remove(pci); return PTR_ERR(dmic_dev); } - - /* Register platform device only if flag set to FLAG_AMD_SOF_ONLY_DMIC */ - if (flag != FLAG_AMD_SOF_ONLY_DMIC) - return 0; - - addr = pci_resource_start(pci, 0); - res = devm_kzalloc(&pci->dev, sizeof(struct resource) * ARRAY_SIZE(renoir_res), GFP_KERNEL); - if (!res) { - sof_pci_remove(pci); - platform_device_unregister(dmic_dev); - return -ENOMEM; - } - - res_i2s = renoir_res; - for (i = 0; i < ARRAY_SIZE(renoir_res); i++, res_i2s++) { - res[i].name = res_i2s->name; - res[i].flags = res_i2s->flags; - res[i].start = addr + res_i2s->start; - res[i].end = addr + res_i2s->end; - if (res_i2s->flags == IORESOURCE_IRQ) { - res[i].start = pci->irq; - res[i].end = res[i].start; - } - } - - memset(&pdevinfo, 0, sizeof(pdevinfo)); - - /* - * We have common PCI driver probe for ACP device but we have to support I2S without SOF - * for some distributions. Register platform device that will be used to support non dsp - * ACP's audio ends points on some machines. - */ - - pdevinfo.name = "acp_asoc_renoir"; - pdevinfo.id = 0; - pdevinfo.parent = &pci->dev; - pdevinfo.num_res = ARRAY_SIZE(renoir_res); - pdevinfo.res = &res[0]; - - pdev = platform_device_register_full(&pdevinfo); - if (IS_ERR(pdev)) { - dev_err(&pci->dev, "cannot register %s device\n", pdevinfo.name); - sof_pci_remove(pci); - platform_device_unregister(dmic_dev); - ret = PTR_ERR(pdev); - } - return ret; }; @@ -158,8 +92,6 @@ static void acp_pci_rn_remove(struct pci_dev *pci) { if (dmic_dev) platform_device_unregister(dmic_dev); - if (pdev) - platform_device_unregister(pdev); return sof_pci_remove(pci); } -- 2.34.1

2 6

[PATCH v3] ASoC: dt-bindings: maxim,max98371: Convert to DT schema
by André Morishita 03 Apr '23

03 Apr '23

Convert the Maxim Integrated MAX98371 audio codec bindings to DT schema. Signed-off-by: André Morishita <andremorishita(a)gmail.com> --- Changes in v3: - Make commit message and subject as v1 with ASoC subject prefix Changes in v2: - Generic node names - codec (Krzysztof) - Drop label max98371 (Krzysztof) - Add sound-dai-cells in example (Krzysztof) .../devicetree/bindings/sound/max98371.txt | 17 -------- .../bindings/sound/maxim,max98371.yaml | 42 +++++++++++++++++++ 2 files changed, 42 insertions(+), 17 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/max98371.txt create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98371.yaml diff --git a/Documentation/devicetree/bindings/sound/max98371.txt b/Documentation/devicetree/bindings/sound/max98371.txt deleted file mode 100644 index 8b2b2704b574..000000000000 --- a/Documentation/devicetree/bindings/sound/max98371.txt +++ /dev/null @@ -1,17 +0,0 @@ -max98371 codec - -This device supports I2C mode only. - -Required properties: - -- compatible : "maxim,max98371" -- reg : The chip select number on the I2C bus - -Example: - -&i2c { - max98371: max98371@31 { - compatible = "maxim,max98371"; - reg = <0x31>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98371.yaml b/Documentation/devicetree/bindings/sound/maxim,max98371.yaml new file mode 100644 index 000000000000..14fba34ef81a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98371.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98371.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX98371 audio codec + +maintainers: + - anish kumar <yesanishhere(a)gmail.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: maxim,max98371 + + '#sound-dai-cells': + const: 0 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@31 { + compatible = "maxim,max98371"; + reg = <0x31>; + #sound-dai-cells = <0>; + }; + }; -- 2.40.0

3 2

[AMD Zen2][lockless dmix] crackling sound
by GitHub issues - opened 03 Apr '23

03 Apr '23

alsa-project/alsa-lib issue #311 was opened from sylware: Everything in the title. Latest alsa-lib, (1.2.8) if I do enable lockless dmix, I get crackling sound on my AMD Zen2. Once I do enable the lock, no crackling sound. Issue URL : https://github.com/alsa-project/alsa-lib/issues/311 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH v1 0/3] Add TDM audio on StarFive JH7110
by Walker Chen 03 Apr '23

03 Apr '23

This patchset adds TDM audio driver for the StarFive JH7110 SoC. The first patch adds device tree binding for TDM module. The second patch adds tdm driver support for JH7110 SoC. The last patch adds device node of tdm and sound card to JH7110 dts. The series has been tested on the VisionFive 2 boards which equip with JH7110 SoC and works normally. The last patch should be applied after the following patchset: https://lore.kernel.org/all/20230322094820.24738-1-walker.chen@starfivetech… Walker Chen (3): dt-bindings: sound: Add TDM for StarFive JH7110 ASoC: starfive: Add JH7110 TDM driver riscv: dts: starfive: add tdm node and sound card .../bindings/sound/starfive,jh7110-tdm.yaml | 95 +++ MAINTAINERS | 6 + .../jh7110-starfive-visionfive-2.dtsi | 87 +++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 34 + sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/starfive/Kconfig | 15 + sound/soc/starfive/Makefile | 2 + sound/soc/starfive/jh7110_tdm.c | 579 ++++++++++++++++++ sound/soc/starfive/jh7110_tdm.h | 155 +++++ 10 files changed, 975 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml create mode 100644 sound/soc/starfive/Kconfig create mode 100644 sound/soc/starfive/Makefile create mode 100644 sound/soc/starfive/jh7110_tdm.c create mode 100644 sound/soc/starfive/jh7110_tdm.h base-commit: fe15c26ee26efa11741a7b632e9f23b01aca4cc6 prerequisite-patch-id: c3a6b87df79b338fc97766406d010fedb79ab428 prerequisite-patch-id: b49509523cf7c098f684647bdc4fdaece48b61bc prerequisite-patch-id: 46cc850aa0e9e03ccf5ed23d8458babfca3d71af prerequisite-patch-id: a6975e61ee5803fbd74b1c21ab925fd81c3c0eab prerequisite-patch-id: ac150a8c622e858e088df8121093d448df49c245 prerequisite-patch-id: 044263ef2fb9f1e5a586edbf85d5f67814a28430 prerequisite-patch-id: 89f049f951e5acf75aab92541992f816fd0acc0d prerequisite-patch-id: 9f3dbc9073eee89134e68977e941e457593c2757 prerequisite-patch-id: 8600b156a235be2b3db53be3f834e7a370e2cfb9 prerequisite-patch-id: 1b2d0982b18da060c82134f05bf3ce16425bac8d prerequisite-patch-id: 090ba4b78d47bc19204916e76fdbc70021785388 prerequisite-patch-id: a5d9e0f7d4f8163f566678894cf693015119f2d9 prerequisite-patch-id: 4c12d958e3a3d629d86dddb1e4f099d8909393e0 prerequisite-patch-id: bb939c0c7c26b08addfccd890f9d3974b6eaec53 prerequisite-patch-id: 8f5c66dfb14403424044192f6fa05b347ad356a7 prerequisite-patch-id: fd93763b95469912bde9bdfa4cd827c8d5dba9c6 prerequisite-patch-id: 6987950c2eb4b3773b2df8f7934eff434244aeab prerequisite-patch-id: 258ea5f9b8bf41b6981345dcc81795f25865d38f prerequisite-patch-id: 8b6f2c9660c0ac0ee4e73e4c21aca8e6b75e81b9 prerequisite-patch-id: dbb0c0151b8bdf093e6ce79fd2fe3f60791a6e0b prerequisite-patch-id: e7773c977a7b37692e9792b21cc4f17fa58f9215 prerequisite-patch-id: d57e95d31686772abc4c4d5aa1cadc344dc293cd prerequisite-patch-id: 9f911969d0a550648493952c99096d26e05d4d83 prerequisite-patch-id: 2ddada18ab6ea5cd1da14212aaf59632f5203d40 prerequisite-patch-id: 398744c61913c76a35754de867c4f820ca7a8d99 prerequisite-patch-id: be3d7a6a13098884ec26cd5e543cc95c39045e35 prerequisite-patch-id: b3ce7955a80d90d992b7d1bca3409f465810b2bb prerequisite-patch-id: db2f66860cc5b2fd2f71747c4428287b6e3153fb prerequisite-patch-id: 9da71dcd3af4c68da9d855b43aab6927103e7525 prerequisite-patch-id: 2d9e4f185631549094b6136cf8717a507b68c5bb prerequisite-patch-id: bb8e071ed43998874b9d98292c0dcdeedc0760ca prerequisite-patch-id: cd0b464336aabfbfad96c1a3595c0f9ce9401638 prerequisite-patch-id: 24eab3d30274700c2be4727bece743c76d2618bd prerequisite-patch-id: 584c256c9acb52ee2773d0c81c3f4977fc18155a prerequisite-patch-id: 2bc43b375b470f7e8bbe937b78678ba3856e3b8f prerequisite-patch-id: 32deea16304859842af5c2151bc41d91cf6dfc9b prerequisite-patch-id: d85dbedbb3b36bbd6806f4eb84a2129c8f8963aa prerequisite-patch-id: c0bdbdd3db98f7ebae0661dd331edac2c84c70f8 prerequisite-patch-id: 6abf359fa445f4104432ddee27044dfbfb128417 -- 2.17.1

4 10

[PATCH for v6.3-rc] ASoC: SOF: ipc4-topology: Clarify bind failure caused by missing fw_module
by Peter Ujfalusi 03 Apr '23

03 Apr '23

The original patch uses a feature in lib/vsprintf.c to handle the invalid address when tring to print *_fw_module->man4_module_entry.name when the *rc_fw_module is NULL. This case is handled by check_pointer_msg() internally and turns the invalid pointer to '(efault)' for printing but it is hiding useful information about the circumstances. Change the print to emmit the name of the widget and a note on which side's fw_module is missing. Fixes: e3720f92e023 ("ASoC: SOF: avoid a NULL dereference with unsupported widgets") Reported-by: Dan Carpenter <error27(a)gmail.com> Link: https://lore.kernel.org/alsa-devel/4826f662-42f0-4a82-ba32-8bf5f8a03256@kil… Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- Hi Mark, Dan, This patch clarifies the print and will not rely on vsprintf internal protection on printing the error. Regards, Peter sound/soc/sof/ipc4-topology.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 669b99a4f76e..3a5394c3dd83 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -1806,10 +1806,12 @@ static int sof_ipc4_route_setup(struct snd_sof_dev *sdev, struct snd_sof_route * int ret; if (!src_fw_module || !sink_fw_module) { - /* The NULL module will print as "(efault)" */ - dev_err(sdev->dev, "source %s or sink %s widget weren't set up properly\n", - src_fw_module->man4_module_entry.name, - sink_fw_module->man4_module_entry.name); + dev_err(sdev->dev, + "cannot bind %s -> %s, no firmware module for: %s%s\n", + src_widget->widget->name, sink_widget->widget->name, + src_fw_module ? "" : " source", + sink_fw_module ? "" : " sink"); + return -ENODEV; } -- 2.40.0

3 2