- Alsa-devel - mailman.alsa-project.org

1.2.13 will lead to mute of speakers and headphone jack on MTL laptop Lenovo Youga Pro 7 14IMH9
by GitHub issues - edited 25 Nov '24

25 Nov '24

alsa-project/alsa-ucm-conf issue #472 was edited from phush0: Changing version from 1.2.12 to 1.2.13 will lead to not working sound during plug/unplug of the head phone jack or mute during reboot on Arch install. Other ppl with similar laptops have reported same problem. On my version codec is ALC287 with bass speaker output. I can unmute speaker or headphones trough alsamixer, but plugin headphone and the unplugin will lead to both mute. Sometimes reboot will lead to same problem and I have to operate channels by hand again. Similar problems: [https://discuss.cachyos.org/t/sound-problems-kde/4350](https://discuss.cach… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/472 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

1.2.13 will lead to mute of speakers and head phone jack on MTL laptop Lenovo Youga Pro 7 14IMH9
by GitHub issues - opened 25 Nov '24

25 Nov '24

alsa-project/alsa-ucm-conf issue #472 was opened from phush0: Changing version from 1.2.12 to 1.2.13 will lead to not working sound during plug/unplug of the head phone jack or mute during reboot on Arch install. Other ppl with similar laptops have reported same problem. On my version codec is ALC287 with bass speaker output. I can unmute speaker or headphones trough alsamixer, but plugin headphone and the unplugin will lead to both mute. Sometimes reboot will lead to same problem and I have to operate channels by hand again. Similar problems: [https://discuss.cachyos.org/t/sound-problems-kde/4350](https://discuss.cach… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/472 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[BUG] HDA Intel PCH, HDMI , HDA Intel PCH, ALC886 Digital, no IEC958 / HDMI output/passthrough to AVR, partly fixed but fix broke CM106
by schorpp 25 Nov '24

25 Nov '24

>> >> [BUG] HDA Intel PCH, HDMI , HDA Intel PCH, ALC886 Digital, no IEC958 / HDMI output/passthrough to AVR >> >> ALSA versions 1.0.28 >> >> Kernel Driver versions 3.12.40 Partly FIXED in Longterm Stable Kernel 4.19.324 and using HDMI DEV 1 instead of 0. 2 CH PCM HDMI to AVR works now but AC3/DTS passthrough still not or is not recognized by AVR or some wrong AES setting but iec958 optical out AC3/DTS output to AVR works. New BUG: No more 5.1 Analog Output on the CM106 USB Box if AC3 stream is selected. Your ALSA information is located at http://alsa-project.org/db/?f=5ef8b56450583ba8afbcc705afc02228da4a3072 y tom >> >> Hardware: >> >> DFI Mainboard MB330-CRM >> >> https://www.dfi.com/de/product/index/273#specification >> >> Reproducible Always >> >> Steps to reproduce and full report: >> >> https://www-vdr--portal-de.translate.goog/forum/index.php?thread/136519-gel… > Output of alsa-info.sh is here > > http://alsa-project.org/db/?f=fc4734deddd9a92331692bf94b15cf84b7722cd4 > >> >> Software crosscheck with CM106 USB Soundbox iec958: works OK. >> >> Where to start in the drivers source code to fix it? >> >> y >> tom >> >>

1 0

Motu D828 (2024) not working again
by GitHub issues - opened 25 Nov '24

25 Nov '24

alsa-project/alsa-ucm-conf issue #471 was opened from beatboxa: I had previously gotten my MOTU D828 working with UCM. I recently used Ubuntu 24.04's software updater, and now my UCM appears to have stopped working. The UCM files are still present in the directories where they previously worked. The output of spa-acp-tool -c 0 -vvvv info now begins with the following: ``` UCM is not supported for this USB device (MOTU 828 at usb-0000:59:00.0-6, high speed @ USB07fd:000e) error: failed to import hw:0 use case configuration -6 UCM is not supported for this USB device (MOTU 828 at usb-0000:59:00.0-6, high speed @ USB07fd:000e) error: failed to import 828 use case configuration -6 UCM not available for card 828 Check for file: /home/beatboxa/.config/alsa-card-profile/mixer/profile-sets/default.conf Check for file: /home/beatboxa/.config/alsa-card-profile/profile-sets/default.conf Check for file: /etc/alsa-card-profile/mixer/profile-sets/default.conf Check for file: /etc/alsa-card-profile/profile-sets/default.conf Loading profile set: /usr/share/alsa-card-profile/mixer/profile-sets/default.conf Parsing configuration file '/usr/share/alsa-card-profile/mixer/profile-sets/default.conf' Parsing configuration file '/usr/share/alsa-card-profile/mixer/profile-sets/9999-custom.conf' Looking at profile input:analog-stereo Checking for recording on Analog Stereo (analog-stereo) Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... ALSA device open 'front:0' capture: 0x5804b63f3d90 snd_pcm_hw_params_set_format(Signed 16 bit Little Endian) failed: Invalid argument snd_pcm_hw_params_set_format(Signed 16 bit Big Endian) failed: Invalid argument snd_pcm_hw_params_set_format(Float 32 bit Little Endian) failed: Invalid argument snd_pcm_hw_params_set_format(Float 32 bit Big Endian) failed: Invalid argument snd_pcm_hw_params_set_format(Signed 32 bit Little Endian) failed: Invalid argument snd_pcm_hw_params_set_format(Signed 32 bit Big Endian) failed: Invalid argument snd_pcm_hw_params_set_format(Signed 24 bit Little Endian) failed: Invalid argument snd_pcm_hw_params_set_format(Signed 24 bit Big Endian) failed: Invalid argument snd_pcm_hw_params_set_channels(2) failed: Invalid argument ALSA device close 0x5804b63f3d90 ``` And goes on from there. Previously, my configuration worked, and is tracked in this thread: #https://github.com/alsa-project/alsa-ucm-conf/pull/416 Is there some little thing I need to change to get UCM working again? Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/471 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

No sound and alsactl init errors after updating to 1.2.13
by GitHub issues - edited 24 Nov '24

24 Nov '24

alsa-project/alsa-utils issue #283 was edited from wastlnd: I think I have kind of a regression after updating to the latest version. Running alsactl restore as a runit service, I have this error at startup: ``` Found hardware: "acp" "" "" "" "" Hardware is initialized using a generic method ``` And I have no sound at all. I have tried to apply the latest commit fixing the udev rule, but it didn't work. Downgrading to 1.2.12 fixes the issue. I am running an Arch based distro (kernel 6.6) on AMD Ryzen 7 5825U CPU with Radeon graphics. My soundcard is Realtek and I have an AMD microphone array. I don't run Pulseaudio or Pipewire, just plain ALSA. Issue URL : https://github.com/alsa-project/alsa-utils/issues/283 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

No sound and alsactl init errors after updating to 1.2.13
by GitHub issues - edited 24 Nov '24

24 Nov '24

alsa-project/alsa-utils issue #283 was edited from wastlnd: I think I have kind of a regression after updating to the latest version. I have this error at startup: ``` Found hardware: "acp" "" "" "" "" Hardware is initialized using a generic method ``` And I have no sound at all. I have tried to apply the latest commit fixing the udev rule, but it didn't work. Downgrading to 1.2.12 fixes the issue. I am running an Arch based distro (kernel 6.6) on AMD Ryzen 7 5825U CPU with Radeon graphics. My soundcard is Realtek and I have an AMD microphone array. I don't run Pulseaudio or Pipewire, just plain ALSA. Issue URL : https://github.com/alsa-project/alsa-utils/issues/283 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

amd-soundwire: add support for AMD generic soundwire legacy machine driver
by GitHub pull_request - edited 24 Nov '24

24 Nov '24

alsa-project/alsa-ucm-conf pull request #470 was edited from vijendarmukunda: Add support for AMD generic legacy(No DSP) machine driver for ACP6.3 platform using RT722 codec. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/470 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/470.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

amd-soundwire: add support for AMD generic legacy machine driver
by GitHub pull_request - opened 24 Nov '24

24 Nov '24

alsa-project/alsa-ucm-conf pull request #470 was opened from vijendarmukunda: Add support for AMD generic legacy(No DSP) machine driver for ACP6.3 platform using RT722 codec. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/470 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/470.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

No sound and alsactl init errors after updating to 1.2.13
by GitHub issues - edited 24 Nov '24

24 Nov '24

alsa-project/alsa-utils issue #283 was edited from wastlnd: I think I have kind of a regression after updating to the latest version. I have this error at startup: ``` Found hardware: "acp" "" "" "" "" Hardware is initialized using a generic method ``` And I have no sound at all. I have tried to apply the latest commit fixing the udev rule, but it didn't work. Downgrading to 1.2.12 fixes the issue. I am running an Arch based distro on AMD Ryzen 7 5825U CPU with Radeon graphics. My soundcard is Realtek and I have an AMD microphone array. Issue URL : https://github.com/alsa-project/alsa-utils/issues/283 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

No sound and alsactl init errors after updating to 1.12.13
by GitHub issues - opened 24 Nov '24

24 Nov '24

alsa-project/alsa-utils issue #283 was opened from wastlnd: I think I have kind of a regression after updating to the latest version. I have this error at startup: ``` Found hardware: "acp" "" "" "" "" Hardware is initialized using a generic method ``` And I have no sound at all. I have tried to apply the latest commit fixing the udev rule, but it didn't work. Downgrading to 1.2.12 fixes the issue. I am running an Arch based distro on AMD Ryzen 7 5825U CPU with Radeon graphics. My soundcard is Realtek and I have an AMD microphone array. Issue URL : https://github.com/alsa-project/alsa-utils/issues/283 Repository URL: https://github.com/alsa-project/alsa-utils

1 0