- Alsa-devel - mailman.alsa-project.org

ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 support
by Dmitry Panchenko | d-Systems 19 Feb '25

19 Feb '25

Hello, Pioneer DJ DJM-900NXS2 is a widely used DJ mixer with 2 audio USB interfaces. Both have a MIDI controller, 10 playback and 12 capture channels. I've submitted Pioneer DJM-900NXS2 support patches back in 2020, but someone has removed set_format_quirk function for DJM-900NXS2 model. The playback and capture do not work, quirks.c needs to be patched. The patch is attached, please add. Signed-off-by: Dmitry Panchenko <dmitry(a)d-systems.ee> -- Kind regards, Dmitry Panchenko

1 0

Realtek driver assignes wrong pins on Omen 16 with B&O audio
by GitHub issues - edited 19 Feb '25

19 Feb '25

alsa-project/alsa-ucm-conf issue #511 was edited from johnfloe:  # Description: I have a dual boot with Arch Linux and Windows 11 on my HP Omen 16 b1001nd with Bang & Olufsen audio. On Windows, the speakers function normally and the volume is quite loud and full at 100%. But on Arch, the audio is very shallow and the volume is low compared to Windows. I've tried using HDAJackRetask, but the Realtek driver overrides the pin settings. When I blacklist the Realtek module, it switches to Generic and I can enable the pins with hda verbs. But the then auto switching for the headphones doesn't work, so I have to figure out how to enable that.. It does seem a bit better when enabling pin 0x14 and pin 0x1e, but still not the same as in Windows. It would be nice to have a working driver/codec so I don't have to configure all the pins myself. Thanks in advance! # Additional info: * package version(s): latest kernel, linux-firmware and sof-firmware installed * config and/or log files: Related commands output: sudo dmesg | grep snd [ 5.052362] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.052469] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 5.052725] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.052736] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.388591] snd_hda_codec_realtek ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:0000 [ 5.388944] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 5.388947] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.388949] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.388951] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 5.388953] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 5.388954] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 inxi -A Audio: Device-1: Intel Alder Lake PCH-P High Definition Audio driver: sof-audio-pci-intel-tgl Device-2: NVIDIA GA104 High Definition Audio driver: snd_hda_intel API: ALSA v: k6.13.2-arch1-1 status: kernel-api Server-1: PipeWire v: 1.2.7 status: active Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/511 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Realtek driver assignes wrong pins on Omen 16 with B&O audio
by GitHub issues - edited 19 Feb '25

19 Feb '25

alsa-project/alsa-ucm-conf issue #511 was edited from johnfloe:  # Description: I have a dual boot with Arch Linux and Windows 11 on my HP Omen 16 b1001nd with Bang & Olufsen audio. On Windows, the speakers function normally and the volume is quite loud and full at 100%. But on Arch, the audio is very shallow and the volume is low compared to Windows. I've tried using HDAJackRetask, but the Realtek driver overrides the pin settings. When I blacklist the Realtek module, it switches to Generic and I can enable the pins with hda verbs. But the then auto switching for the headphones doesn't work, so I have to figure out how to enable that.. It does seem a bit better when enabling pin 0x14 and pin 0x1e, but still not the same as in Windows. It would be nice to have a working driver/codec so I don't have to configure all the pins myself. Thanks in advance! # Additional info: * package version(s): latest kernel, linux-firmware and sof-firmware installed * config and/or log files: Related dmesg output: sudo dmesg | grep snd [ 5.052362] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.052469] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 5.052725] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.052736] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.388591] snd_hda_codec_realtek ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:0000 [ 5.388944] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 5.388947] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.388949] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.388951] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 5.388953] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 5.388954] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/511 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Realtek driver assignes wrong pins on Omen 16 with B&O audio
by GitHub issues - edited 19 Feb '25

19 Feb '25

alsa-project/alsa-ucm-conf issue #511 was edited from johnfloe:  # Description: I have a dual boot with Arch Linux and Windows 11 on my HP Omen 16 b1001nd with Bang & Olufsen audio. On Windows, the speakers function normally and the volume is quite loud and full at 100%. But on Arch, the audio is very shallow and the volume is low compared to Windows. I've tried using HDAJackRetask, but the Realtek driver overrides the pin settings. When I blacklist the Realtek module, it switches to Generic and I can enable the pins with hda verbs. But the then auto switching for the headphones doesn't work, so I have to figure out how to enable that.. It does seem a bit better when enabling pin 0x14 and pin 0x1e, but still not the same as in Windows. It would be nice to have a working driver/codec so I don't have to configure all the pins myself. Thanks in advance! # Additional info: * package version(s): latest kernel, linux-firmware and sof-firmware installed * config and/or log files: Related dmesg output: `sudo dmesg | grep snd [ 5.052362] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.052469] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 5.052725] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.052736] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.388591] snd_hda_codec_realtek ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:0000 [ 5.388944] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 5.388947] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.388949] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.388951] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 5.388953] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 5.388954] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19` Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/511 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Realtek driver assignes wrong pins on Omen 16 with B&O audio
by GitHub issues - edited 19 Feb '25

19 Feb '25

alsa-project/alsa-ucm-conf issue #511 was edited from johnfloe:  # Description: I have a dual boot with Arch Linux and Windows 11 on my HP Omen 16 b1001nd with Bang & Olufsen audio. On Windows, the speakers function normally and the volume is quite loud and full at 100%. But on Arch, the audio is very shallow and the volume is low compared to Windows. I've tried using HDAJackRetask, but the Realtek driver overrides the pin settings. When I blacklist the Realtek module, it switches to Generic and I can enable the pins with hda verbs. But the then auto switching for the headphones doesn't work, so I have to figure out how to enable that.. It does seem a bit better when enabling pin 0x14 and pin 0x1e, but still not the same as in Windows. It would be nice to have a working driver/codec so I don't have to configure all the pins myself. Thanks in advance! # Additional info: * package version(s): latest kernel, linux-firmware and sof-firmware installed * config and/or log files: Related dmesg output: `sudo dmesg | grep snd\n [ 5.052362] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.052469] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 5.052725] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.052736] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.388591] snd_hda_codec_realtek ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:0000 [ 5.388944] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 5.388947] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.388949] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.388951] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 5.388953] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 5.388954] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19` Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/511 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Realtek driver assignes wrong pins on Omen 16 with B&O audio
by GitHub issues - edited 19 Feb '25

19 Feb '25

alsa-project/alsa-ucm-conf issue #511 was edited from johnfloe:  # Description: I have a dual boot with Arch Linux and Windows 11 on my HP Omen 16 b1001nd with Bang & Olufsen audio. On Windows, the speakers function normally and the volume is quite loud and full at 100%. But on Arch, the audio is very shallow and the volume is low compared to Windows. I've tried using HDAJackRetask, but the Realtek driver overrides the pin settings. When I blacklist the Realtek module, it switches to Generic and I can enable the pins with hda verbs. But the then auto switching for the headphones doesn't work, so I have to figure out how to enable that.. It does seem a bit better when enabling pin 0x14 and pin 0x1e, but still not the same as in Windows. It would be nice to have a working driver/codec so I don't have to configure all the pins myself. Thanks in advance! # Additional info: * package version(s): latest kernel, linux-firmware and sof-firmware installed * config and/or log files: Related dmesg output: ` sudo dmesg | grep snd [ 5.052362] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.052469] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 5.052725] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.052736] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.388591] snd_hda_codec_realtek ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:0000 [ 5.388944] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 5.388947] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.388949] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.388951] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 5.388953] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 5.388954] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19` Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/511 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Realtek driver assignes wrong pins on Omen 16 with B&O audio
by GitHub issues - opened 19 Feb '25

19 Feb '25

alsa-project/alsa-ucm-conf issue #511 was opened from johnfloe:  # Description: I have a dual boot with Arch Linux and Windows 11 on my HP Omen 16 b1001nd with Bang & Olufsen audio. On Windows, the speakers function normally and the volume is quite loud and full at 100%. But on Arch, the audio is very shallow and the volume is low compared to Windows. I've tried using HDAJackRetask, but the Realtek driver overrides the pin settings. When I blacklist the Realtek module, it switches to Generic and I can enable the pins with hda verbs. But the then auto switching for the headphones doesn't work, so I have to figure out how to enable that.. It does seem a bit better when enabling pin 0x14 and pin 0x1e, but still not the same as in Windows. It would be nice to have a working driver/codec so I don't have to configure all the pins myself. Thanks in advance! # Additional info: * package version(s): latest kernel, linux-firmware and sof-firmware installed * config and/or log files: Related dmesg output: sudo dmesg | grep snd [ 5.052362] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.052469] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 5.052725] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.052736] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.388591] snd_hda_codec_realtek ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:0000 [ 5.388944] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 5.388947] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.388949] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.388951] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 5.388953] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 5.388954] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/511 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH RESEND 0/7] Initial Support for CS40L26
by Fred Treven 19 Feb '25

19 Feb '25

Introduce driver for Cirrus Logic Device CS40L26: A boosted haptics driver with integrated DSP and waveform memory with advanced closed loop algorithms and LRA protection. The core CS40L26 driver is in MFD and touches the Input Force Feedback subsystem for haptics and the ASoC subsystem for audio to haptics streaming. This patchset includes changes to the CS DSP firmware driver which fixes two bugs and introduces support for multiple coefficient files. Fred Treven (7): firmware: cs_dsp: Fix error checking in wseq_write() firmware: cs_dsp: Check for valid num_regs in cs_dsp_wseq_multi_write() firmware: cs_dsp: Add ability to load multiple coefficient files dt-bindings: mfd: cirrus,cs40l26: Support for CS40L26 mfd: cs40l26: Add support for CS40L26 core driver ASoC: cs40l26: Support I2S streaming to CS40L26 Input: cs40l26 - Add support for CS40L26 haptic driver .../bindings/mfd/cirrus,cs40l26.yaml | 81 + MAINTAINERS | 4 +- drivers/firmware/cirrus/cs_dsp.c | 70 +- drivers/input/misc/Kconfig | 10 + drivers/input/misc/Makefile | 1 + drivers/input/misc/cs40l26-vibra.c | 669 ++++++++ drivers/mfd/Kconfig | 29 + drivers/mfd/Makefile | 4 + drivers/mfd/cs40l26-core.c | 1412 +++++++++++++++++ drivers/mfd/cs40l26-i2c.c | 63 + drivers/mfd/cs40l26-spi.c | 63 + include/linux/firmware/cirrus/cs_dsp.h | 14 + include/linux/mfd/cs40l26.h | 341 ++++ sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/cs40l26-codec.c | 523 ++++++ 16 files changed, 3281 insertions(+), 17 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,cs40l26.yaml create mode 100644 drivers/input/misc/cs40l26-vibra.c create mode 100644 drivers/mfd/cs40l26-core.c create mode 100644 drivers/mfd/cs40l26-i2c.c create mode 100644 drivers/mfd/cs40l26-spi.c create mode 100644 include/linux/mfd/cs40l26.h create mode 100644 sound/soc/codecs/cs40l26-codec.c -- 2.34.1

6 17

[PATCH] ASoC: amd: ps: fix inconsistent indenting warning in check_and_handle_sdw_dma_irq()
by Vijendar Mukunda 18 Feb '25

18 Feb '25

Fix below inconsistent indenting smatch warning. smatch warnings: sound/soc/amd/ps/pci-ps.c:68 check_and_handle_sdw_dma_irq() warn: inconsistent indenting Fixes: 4516be370ced ("ASoC: amd: ps: refactor soundwire dma interrupt handling") Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502132134.BlkNw1Iq-lkp@intel.com/ Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- sound/soc/amd/ps/pci-ps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/amd/ps/pci-ps.c b/sound/soc/amd/ps/pci-ps.c index 2ff8e67c19bd..221c65ff03c9 100644 --- a/sound/soc/amd/ps/pci-ps.c +++ b/sound/soc/amd/ps/pci-ps.c @@ -129,7 +129,7 @@ static short int check_and_handle_sdw_dma_irq(struct acp63_dev_data *adata, u32 if (ext_intr_stat1 & ACP63_P1_AUDIO1_RX_THRESHOLD) { writel(ACP63_P1_AUDIO1_RX_THRESHOLD, adata->acp63_base + ACP_EXTERNAL_INTR_STAT1); - adata->acp63_sdw1_dma_intr_stat[ACP63_SDW1_AUDIO1_RX] = 1; + adata->acp63_sdw1_dma_intr_stat[ACP63_SDW1_AUDIO1_RX] = 1; sdw_dma_irq_flag = 1; } if (ext_intr_stat1 & ACP63_P1_AUDIO1_TX_THRESHOLD) { -- 2.34.1

2 1

ALC4080 5.1 don't work - rear speakers recognized as mic
by GitHub issues - edited 18 Feb '25

18 Feb '25

alsa-project/alsa-ucm-conf issue #510 was edited from atazx: kubuntu 24.10 MSI X870 Mag Tomahawk motherboard, with integrated ALC4080 (usb id `0db0:cd0e`) I tried to install the latest version of alsa-ucm-conf (1.2.13) On this card to have 5.1 audio you have to connect the rear speakers to the front panel, in what would normally be the microphone input, in fact when I connect the speakers they are recognized as a microphone. (only with ucm-conf 1.2.13) front speaker always works rear speakers only work after rebooting from windows center speakers do not work is there a way to fix this problem? Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/510 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0