- Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: qcom: lpass-platform: Reset irq clear reg post handling interrupts
by Srinivasa Rao Mandadapu 07 Sep '21

07 Sep '21

Update interrupt clear register with reset value after addressing all interrupts. This is to fix playback or capture hanging issue in simultaneous playback and capture usecase. Signed-off-by: Srinivasa Rao Mandadapu <srivasam(a)codeaurora.org> --- sound/soc/qcom/lpass-platform.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index f9df76d37858..1a0a4b0b1a03 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -749,6 +749,12 @@ static irqreturn_t lpass_platform_lpaif_irq(int irq, void *data) } } + rv = regmap_write(drvdata->lpaif_map, LPAIF_IRQCLEAR_REG(v, LPAIF_IRQ_PORT_HOST), 0x0); + if (rv) { + pr_err("error writing to irqstat reg: %d\n", rv); + return IRQ_NONE; + } + return IRQ_HANDLED; } -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

2 3

[PATCH v6 0/2] Cirrus Logic CS35L41 Amplifier
by David Rhodes 07 Sep '21

07 Sep '21

ASoC driver and devicetree documentation for a new Cirrus Logic amplifier CS35L41 v6 changes: Fix header comment style Remove some unsafe mixer controls Remove some fields in regmap readable_reg Remove unneccesssary regmap setup in component_probe Remove extra whitespace Reorder in probe: handle_pdata before regulator_enable Set initial analog gain to 0dB David Rhodes (2): ASoC: cs35l41: CS35L41 Boosted Smart Amplifier ASoC: cs35l41: Add bindings for CS35L41 .../devicetree/bindings/sound/cs35l41.yaml | 162 ++ include/sound/cs35l41.h | 35 + sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/cs35l41-i2c.c | 114 ++ sound/soc/codecs/cs35l41-spi.c | 143 ++ sound/soc/codecs/cs35l41-tables.c | 597 +++++++ sound/soc/codecs/cs35l41.c | 1561 +++++++++++++++++ sound/soc/codecs/cs35l41.h | 775 ++++++++ 9 files changed, 3403 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cs35l41.yaml create mode 100644 include/sound/cs35l41.h create mode 100644 sound/soc/codecs/cs35l41-i2c.c create mode 100644 sound/soc/codecs/cs35l41-spi.c create mode 100644 sound/soc/codecs/cs35l41-tables.c create mode 100644 sound/soc/codecs/cs35l41.c create mode 100644 sound/soc/codecs/cs35l41.h -- 2.25.1

2 4

[PATCH] ASoC: wm8960: Fix clock configuration on slave mode
by Shengjiu Wang 07 Sep '21

07 Sep '21

There is a noise issue for 8kHz sample rate on slave mode. Compared with master mode, the difference is the DACDIV setting, after correcting the DACDIV, the noise is gone. There is no noise issue for 48kHz sample rate, because the default value of DACDIV is correct for 48kHz. So wm8960_configure_clocking() should be functional for ADC and DAC function even if it is slave mode. In order to be compatible for old use case, just add condition for checking that sysclk is zero with slave mode. Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock") Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/codecs/wm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 9e621a254392..9c6af76a60fd 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -742,7 +742,7 @@ static int wm8960_configure_clocking(struct snd_soc_component *component) int i, j, k; int ret; - if (!(iface1 & (1<<6))) { + if (!(iface1 & (1 << 6)) && !wm8960->sysclk) { dev_dbg(component->dev, "Codec is slave mode, no need to configure clock\n"); return 0; -- 2.17.1

2 1

[PATCH 1/2] ALSA: gus: Fix repeated probes of snd_gus_create()
by Takashi Iwai 07 Sep '21

07 Sep '21

GUS card object may be repeatedly probed for the legacy ISA devices, and the behavior doesn't fit with the devres resource management. Revert partially back to the classical way for the snd_gus_card object, so that the repeated calls of snd_gus_create() are allowed. Fixes: 5b88da3c800f ("ALSA: gus: Allocate resources with device-managed APIs") Reported-by: kernel test robot <oliver.sang(a)intel.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/isa/gus/gus_main.c | 44 ++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 13 deletions(-) diff --git a/sound/isa/gus/gus_main.c b/sound/isa/gus/gus_main.c index ae1e2542ee4a..3b46490271fe 100644 --- a/sound/isa/gus/gus_main.c +++ b/sound/isa/gus/gus_main.c @@ -87,10 +87,24 @@ static void snd_gus_init_control(struct snd_gus_card *gus) static int snd_gus_free(struct snd_gus_card *gus) { - if (gus->gf1.res_port2) { - snd_gf1_stop(gus); - snd_gus_init_dma_irq(gus, 0); + if (gus->gf1.res_port2 == NULL) + goto __hw_end; + snd_gf1_stop(gus); + snd_gus_init_dma_irq(gus, 0); + __hw_end: + release_and_free_resource(gus->gf1.res_port1); + release_and_free_resource(gus->gf1.res_port2); + if (gus->gf1.irq >= 0) + free_irq(gus->gf1.irq, (void *) gus); + if (gus->gf1.dma1 >= 0) { + disable_dma(gus->gf1.dma1); + free_dma(gus->gf1.dma1); } + if (!gus->equal_dma && gus->gf1.dma2 >= 0) { + disable_dma(gus->gf1.dma2); + free_dma(gus->gf1.dma2); + } + kfree(gus); return 0; } @@ -116,7 +130,7 @@ int snd_gus_create(struct snd_card *card, }; *rgus = NULL; - gus = devm_kzalloc(card->dev, sizeof(*gus), GFP_KERNEL); + gus = kzalloc(sizeof(*gus), GFP_KERNEL); if (gus == NULL) return -ENOMEM; spin_lock_init(&gus->reg_lock); @@ -142,33 +156,35 @@ int snd_gus_create(struct snd_card *card, gus->gf1.reg_timerctrl = GUSP(gus, TIMERCNTRL); gus->gf1.reg_timerdata = GUSP(gus, TIMERDATA); /* allocate resources */ - gus->gf1.res_port1 = devm_request_region(card->dev, port, 16, - "GUS GF1 (Adlib/SB)"); + gus->gf1.res_port1 = request_region(port, 16, "GUS GF1 (Adlib/SB)"); if (!gus->gf1.res_port1) { snd_printk(KERN_ERR "gus: can't grab SB port 0x%lx\n", port); + snd_gus_free(gus); return -EBUSY; } - gus->gf1.res_port2 = devm_request_region(card->dev, port + 0x100, 12, - "GUS GF1 (Synth)"); + gus->gf1.res_port2 = request_region(port + 0x100, 12, "GUS GF1 (Synth)"); if (!gus->gf1.res_port2) { snd_printk(KERN_ERR "gus: can't grab synth port 0x%lx\n", port + 0x100); + snd_gus_free(gus); return -EBUSY; } - if (irq >= 0 && devm_request_irq(card->dev, irq, snd_gus_interrupt, 0, - "GUS GF1", (void *) gus)) { + if (irq >= 0 && request_irq(irq, snd_gus_interrupt, 0, "GUS GF1", (void *) gus)) { snd_printk(KERN_ERR "gus: can't grab irq %d\n", irq); + snd_gus_free(gus); return -EBUSY; } gus->gf1.irq = irq; card->sync_irq = irq; - if (snd_devm_request_dma(card->dev, dma1, "GUS - 1")) { + if (request_dma(dma1, "GUS - 1")) { snd_printk(KERN_ERR "gus: can't grab DMA1 %d\n", dma1); + snd_gus_free(gus); return -EBUSY; } gus->gf1.dma1 = dma1; if (dma2 >= 0 && dma1 != dma2) { - if (snd_devm_request_dma(card->dev, dma2, "GUS - 2")) { + if (request_dma(dma2, "GUS - 2")) { snd_printk(KERN_ERR "gus: can't grab DMA2 %d\n", dma2); + snd_gus_free(gus); return -EBUSY; } gus->gf1.dma2 = dma2; @@ -193,8 +209,10 @@ int snd_gus_create(struct snd_card *card, gus->gf1.volume_ramp = 25; gus->gf1.smooth_pan = 1; err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, gus, &ops); - if (err < 0) + if (err < 0) { + snd_gus_free(gus); return err; + } *rgus = gus; return 0; } -- 2.26.2

1 1

[PATCH v1] ALSA: vx222: fix null-ptr-deref
by Tong Zhang 07 Sep '21

07 Sep '21

a recent refactor created a null pointer vx in snd_vx222_probe(). The vx pointer should have been populated in snd_vx222_create() as suggested in earlier version, otherwise vx->core.ibl.size will throw an error. [ 1.298398] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [ 1.316799] RIP: 0010:snd_vx222_probe+0x155/0x290 [snd_vx222] Fixes: 3bde3359aa16 ("ALSA: vx222: Allocate resources with device-managed APIs") Signed-off-by: Tong Zhang <ztong0001(a)gmail.com> --- sound/pci/vx222/vx222.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/vx222/vx222.c b/sound/pci/vx222/vx222.c index f48cc20b9e8a..468a6a20dc1e 100644 --- a/sound/pci/vx222/vx222.c +++ b/sound/pci/vx222/vx222.c @@ -137,6 +137,7 @@ static int snd_vx222_create(struct snd_card *card, struct pci_dev *pci, } chip->irq = pci->irq; card->sync_irq = chip->irq; + *rchip = vx; return 0; } -- 2.25.1

2 1

ucm2: Add UCM support for rockchip_es8316 on Pinebook Pro
by GitHub pull_request - opened 07 Sep '21

07 Sep '21

alsa-project/alsa-ucm-conf pull request #112 was opened from starnight: Add UCM config files for Pinebook Pro's audio. The config files are transformed and tuned from Manjaro ARM's packages: * pinebookpro-post-install's asound.state [1] * pinebookpro-audio's audio_jack_plugged_in.sh [2] By the way, with these config files, the Speaker and Headphones will be switched according to the (un)plugged state automatically. [1] https://gitlab.manjaro.org/manjaro-arm/packages/community/pinebookpro-post-… [2] https://gitlab.manjaro.org/manjaro-arm/packages/community/pinebookpro-audio… Fixes: https://github.com/alsa-project/alsa-ucm-conf/issues/110 Signed-off-by: Jian-Hong Pan <jhp(a)endlessos.org> Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/112 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/112.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] ASoC: dpcm: fix race condition to dpcm links in dpcm_be_dai_trigger
by Gyeongtaek Lee 07 Sep '21

07 Sep '21

If routing change and underrun stop is run at the same time, data abort can be occurred by the following sequence. CPU0: Processing underrun CPU1: Processing routing change dpcm_be_dai_trigger(): dpcm_be_disconnect(): for_each_dpcm_be(fe, stream, dpcm) { spin_lock_irqsave(&fe->card->dpcm_lock, flags); list_del(&dpcm->list_be); list_del(&dpcm->list_fe); spin_unlock_irqrestore(&fe->card->dpcm_lock, flags); kfree(dpcm); struct snd_soc_pcm_runtime *be = dpcm->be; <-- Accessing freed memory To prevent this situation, dpcm_lock is needed during accessing the lists for dpcm links. Signed-off-by: Gyeongtaek Lee <gt82.lee(a)samsung.com> Cc: stable(a)vger.kernel.org --- sound/soc/soc-pcm.c | 53 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 50 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 48f71bb81a2f..df2cd4c0dabe 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1993,17 +1993,63 @@ static int dpcm_fe_dai_hw_params(struct snd_pcm_substream *substream, return ret; } +struct dpcm_be_list { + unsigned int num; + struct snd_soc_pcm_runtime *be[]; +}; + +static int dpcm_create_be_list(struct snd_soc_pcm_runtime *fe, int stream, + struct dpcm_be_list **be_list) +{ + struct snd_soc_dpcm *dpcm; + struct dpcm_be_list *be; + int size = 0; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fe->card->dpcm_lock, flags); + + for_each_dpcm_be(fe, stream, dpcm) + size++; + + be = kzalloc(struct_size(be, be, size), GFP_ATOMIC); + if (!be) { + ret = -ENOMEM; + } else { + unsigned int i = 0; + + for_each_dpcm_be(fe, stream, dpcm) + be->be[i++] = dpcm->be; + + *be_list = be; + } + + spin_unlock_irqrestore(&fe->card->dpcm_lock, flags); + + return ret; +} + +static void dpcm_free_be_list(struct dpcm_be_list *be_list) +{ + kfree(be_list); +} + int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, int cmd) { struct snd_soc_pcm_runtime *be; - struct snd_soc_dpcm *dpcm; + struct dpcm_be_list *be_list; int ret = 0; + int i; - for_each_dpcm_be(fe, stream, dpcm) { + ret = dpcm_create_be_list(fe, stream, &be_list); + if (ret < 0) + return ret; + + for(i = 0; i < be_list->num; i++) { struct snd_pcm_substream *be_substream; - be = dpcm->be; + be = be_list->be[i]; be_substream = snd_soc_dpcm_get_substream(be, stream); /* is this op for this BE ? */ @@ -2092,6 +2138,7 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, if (ret < 0) dev_err(fe->dev, "ASoC: %s() failed at %s (%d)\n", __func__, be->dai_link->name, ret); + dpcm_free_be_list(be_list); return ret; } EXPORT_SYMBOL_GPL(dpcm_be_dai_trigger); base-commit: 4ac6d90867a4de2e12117e755dbd76e08d88697f -- 2.21.0

1 0

[PATCH] dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries
by Rob Herring 06 Sep '21

06 Sep '21

'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum' is more concise and yields better error messages. Cc: Vinod Koul <vkoul(a)kernel.org> Cc: Maxime Ripard <mripard(a)kernel.org> Cc: Vignesh R <vigneshr(a)ti.com> Cc: Marc Zyngier <maz(a)kernel.org> Cc: Sakari Ailus <sakari.ailus(a)linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab(a)kernel.org> Cc: Lee Jones <lee.jones(a)linaro.org> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Jakub Kicinski <kuba(a)kernel.org> Cc: Bjorn Helgaas <bhelgaas(a)google.com> Cc: Kishon Vijay Abraham I <kishon(a)ti.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Daniel Lezcano <daniel.lezcano(a)linaro.org> Cc: dmaengine(a)vger.kernel.org Cc: linux-i2c(a)vger.kernel.org Cc: linux-media(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: linux-pci(a)vger.kernel.org Cc: linux-phy(a)lists.infradead.org Cc: linux-serial(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org Cc: linux-spi(a)vger.kernel.org Signed-off-by: Rob Herring <robh(a)kernel.org> --- .../bindings/display/msm/dsi-phy-10nm.yaml | 6 +++--- .../bindings/display/msm/dsi-phy-14nm.yaml | 6 +++--- .../bindings/display/msm/dsi-phy-28nm.yaml | 8 ++++---- .../bindings/dma/allwinner,sun6i-a31-dma.yaml | 12 ++++++------ .../devicetree/bindings/firmware/arm,scpi.yaml | 6 +++--- .../devicetree/bindings/i2c/ti,omap4-i2c.yaml | 10 +++++----- .../interrupt-controller/loongson,liointc.yaml | 8 ++++---- .../devicetree/bindings/media/i2c/mipi-ccs.yaml | 8 ++++---- .../devicetree/bindings/mfd/ti,lp87565-q1.yaml | 6 +++--- .../devicetree/bindings/net/realtek-bluetooth.yaml | 8 ++++---- .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 8 ++++---- .../devicetree/bindings/net/ti,k3-am654-cpts.yaml | 6 +++--- Documentation/devicetree/bindings/pci/loongson.yaml | 8 ++++---- .../devicetree/bindings/phy/intel,lgm-emmc-phy.yaml | 6 +++--- .../devicetree/bindings/serial/8250_omap.yaml | 9 +++++---- .../devicetree/bindings/sound/qcom,sm8250.yaml | 6 +++--- .../devicetree/bindings/sound/tlv320adcx140.yaml | 8 ++++---- .../devicetree/bindings/spi/realtek,rtl-spi.yaml | 12 ++++++------ .../devicetree/bindings/timer/arm,sp804.yaml | 6 +++--- 19 files changed, 74 insertions(+), 73 deletions(-) diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index 4a26bef19360..4399715953e1 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -14,9 +14,9 @@ allOf: properties: compatible: - oneOf: - - const: qcom,dsi-phy-10nm - - const: qcom,dsi-phy-10nm-8998 + enum: + - qcom,dsi-phy-10nm + - qcom,dsi-phy-10nm-8998 reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 72a00cce0147..064df50e21a5 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -14,9 +14,9 @@ allOf: properties: compatible: - oneOf: - - const: qcom,dsi-phy-14nm - - const: qcom,dsi-phy-14nm-660 + enum: + - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-660 reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index b106007116b4..69eecaa64b18 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -14,10 +14,10 @@ allOf: properties: compatible: - oneOf: - - const: qcom,dsi-phy-28nm-hpm - - const: qcom,dsi-phy-28nm-lp - - const: qcom,dsi-phy-28nm-8960 + enum: + - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-lp + - qcom,dsi-phy-28nm-8960 reg: items: diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml index c1676b96daac..a6df6f8b54db 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml @@ -19,12 +19,12 @@ properties: description: The cell is the request line number. compatible: - oneOf: - - const: allwinner,sun6i-a31-dma - - const: allwinner,sun8i-a23-dma - - const: allwinner,sun8i-a83t-dma - - const: allwinner,sun8i-h3-dma - - const: allwinner,sun8i-v3s-dma + enum: + - allwinner,sun6i-a31-dma + - allwinner,sun8i-a23-dma + - allwinner,sun8i-a83t-dma + - allwinner,sun8i-h3-dma + - allwinner,sun8i-v3s-dma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml index d7113b06454b..23b346bd1252 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml @@ -131,9 +131,9 @@ properties: properties: compatible: - oneOf: - - const: arm,scpi-dvfs-clocks - - const: arm,scpi-variable-clocks + enum: + - arm,scpi-dvfs-clocks + - arm,scpi-variable-clocks '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml index ff165ad1bee8..db0843be91c5 100644 --- a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml @@ -72,11 +72,11 @@ additionalProperties: false if: properties: compatible: - oneOf: - - const: ti,omap2420-i2c - - const: ti,omap2430-i2c - - const: ti,omap3-i2c - - const: ti,omap4-i2c + enum: + - ti,omap2420-i2c + - ti,omap2430-i2c + - ti,omap3-i2c + - ti,omap4-i2c then: properties: diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index edf26452dc72..750cc44628e9 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -19,10 +19,10 @@ allOf: properties: compatible: - oneOf: - - const: loongson,liointc-1.0 - - const: loongson,liointc-1.0a - - const: loongson,liointc-2.0 + enum: + - loongson,liointc-1.0 + - loongson,liointc-1.0a + - loongson,liointc-2.0 reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml index 701f4e0d138f..39395ea8c318 100644 --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml @@ -83,10 +83,10 @@ properties: link-frequencies: true data-lanes: true bus-type: - oneOf: - - const: 1 # CSI-2 C-PHY - - const: 3 # CCP2 - - const: 4 # CSI-2 D-PHY + enum: + - 1 # CSI-2 C-PHY + - 3 # CCP2 + - 4 # CSI-2 D-PHY required: - link-frequencies diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml index 48d4d53c25f9..012d25111054 100644 --- a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml @@ -11,9 +11,9 @@ maintainers: properties: compatible: - oneOf: - - const: ti,lp87565 - - const: ti,lp87565-q1 + enum: + - ti,lp87565 + - ti,lp87565-q1 reg: description: I2C slave address diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml index 4f485df69ac3..0634e69dd9a6 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -17,10 +17,10 @@ description: properties: compatible: - oneOf: - - const: "realtek,rtl8723bs-bt" - - const: "realtek,rtl8723cs-bt" - - const: "realtek,rtl8822cs-bt" + enum: + - realtek,rtl8723bs-bt + - realtek,rtl8723cs-bt + - realtek,rtl8822cs-bt device-wake-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 783b9e32cf66..4b97a0f1175b 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -53,10 +53,10 @@ properties: "#size-cells": true compatible: - oneOf: - - const: ti,am654-cpsw-nuss - - const: ti,j721e-cpsw-nuss - - const: ti,am642-cpsw-nuss + enum: + - ti,am654-cpsw-nuss + - ti,j721e-cpsw-nuss + - ti,am642-cpsw-nuss reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index 4317eba503ca..1a81bf70c88c 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -45,9 +45,9 @@ properties: pattern: "^cpts@[0-9a-f]+$" compatible: - oneOf: - - const: ti,am65-cpts - - const: ti,j721e-cpts + enum: + - ti,am65-cpts + - ti,j721e-cpts reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml index 82bc6c486ca3..a8324a9bd002 100644 --- a/Documentation/devicetree/bindings/pci/loongson.yaml +++ b/Documentation/devicetree/bindings/pci/loongson.yaml @@ -17,10 +17,10 @@ allOf: properties: compatible: - oneOf: - - const: loongson,ls2k-pci - - const: loongson,ls7a-pci - - const: loongson,rs780e-pci + enum: + - loongson,ls2k-pci + - loongson,ls7a-pci + - loongson,rs780e-pci reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml index edd9d70a672a..954e67571dfd 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -23,9 +23,9 @@ description: |+ properties: compatible: - oneOf: - - const: intel,lgm-emmc-phy - - const: intel,keembay-emmc-phy + enum: + - intel,lgm-emmc-phy + - intel,keembay-emmc-phy "#phy-cells": const: 0 diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index 1c826fcf5828..c987fb648c3c 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -90,10 +90,11 @@ additionalProperties: false if: properties: compatible: - oneOf: - - const: ti,omap2-uart - - const: ti,omap3-uart - - const: ti,omap4-uart + contains: + enum: + - ti,omap2-uart + - ti,omap3-uart + - ti,omap4-uart then: properties: diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 72ad9ab91832..7d57eb91657a 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -15,9 +15,9 @@ description: properties: compatible: - oneOf: - - const: qcom,sm8250-sndcard - - const: qcom,qrb5165-rb5-sndcard + enum: + - qcom,sm8250-sndcard + - qcom,qrb5165-rb5-sndcard audio-routing: $ref: /schemas/types.yaml#/definitions/non-unique-string-array diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index 54d64785aad2..d77c8283526d 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -24,10 +24,10 @@ description: | properties: compatible: - oneOf: - - const: ti,tlv320adc3140 - - const: ti,tlv320adc5140 - - const: ti,tlv320adc6140 + enum: + - ti,tlv320adc3140 + - ti,tlv320adc5140 + - ti,tlv320adc6140 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml index 30a62a211984..2f938c293f70 100644 --- a/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml +++ b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml @@ -15,12 +15,12 @@ allOf: properties: compatible: - oneOf: - - const: realtek,rtl8380-spi - - const: realtek,rtl8382-spi - - const: realtek,rtl8391-spi - - const: realtek,rtl8392-spi - - const: realtek,rtl8393-spi + enum: + - realtek,rtl8380-spi + - realtek,rtl8382-spi + - realtek,rtl8391-spi + - realtek,rtl8392-spi + - realtek,rtl8393-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml index 960e2bd66a97..41be7cdab2ec 100644 --- a/Documentation/devicetree/bindings/timer/arm,sp804.yaml +++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml @@ -23,9 +23,9 @@ select: properties: compatible: contains: - oneOf: - - const: arm,sp804 - - const: hisilicon,sp804 + enum: + - arm,sp804 + - hisilicon,sp804 required: - compatible -- 2.30.2

9 8

hdajackretask doesn't check for script's exit code
by GitHub issues - edited 06 Sep '21

06 Sep '21

alsa-project/alsa-tools issue #8 was edited from kroq-gar78: `hdajackretask` creates a script in `/tmp` before executing it. When `/tmp` is mounted with `noexec`, running that script will fail, but the GUI gives no indication that it failed. I'm on Ubuntu 18.04.5, with `alsa-tools-gui` package version `1.1.3-1`. The GUI should check for the exit code of the script, and notify the user appropriately if the script failed to execute. Also, if this isn't the appropriate place to report a bug, please let me know! Issue URL : https://github.com/alsa-project/alsa-tools/issues/8 Repository URL: https://github.com/alsa-project/alsa-tools

1 0

hdajackretask doesn't check for script's exit code
by GitHub issues - edited 06 Sep '21

06 Sep '21

alsa-project/alsa-tools issue #8 was edited from kroq-gar78: `hdajackretask` creates a script in `/tmp` before executing it. When `/tmp` is mounted with `noexec`, running that script will fail, but the GUI gives no indication that it failed. I'm on Ubuntu 18.04.5 with `alsa-tools-gui` package version `1.1.3-1`. The GUI should check for the exit code of the script, and notify the user appropriately if the script failed to execute. Also, if this isn't the appropriate place to report a bug, please let me know! Issue URL : https://github.com/alsa-project/alsa-tools/issues/8 Repository URL: https://github.com/alsa-project/alsa-tools

1 0