- Alsa-devel - mailman.alsa-project.org

[PATCH 0/2] Add support for the TAS5733
by Kamel Bouhara 06 Mar '23

06 Mar '23

Hello, This small series extends the tas571x driver to support the TAS5733 audio power amplifier. Kamel Bouhara (2): ASoC: tas571x: add tas5733 compatible ASoC: tas571x: add support for TAS5733 .../devicetree/bindings/sound/tas571x.txt | 1 + sound/soc/codecs/tas571x.c | 59 +++++++++++++++++++ 2 files changed, 60 insertions(+) -- 2.35.1

3 4

[PATCH] ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds
by Ravulapati Vishnu Vardhan Rao 06 Mar '23

06 Mar '23

When we run syzkaller we get below Out of Bound. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: dump_backtrace+0x0/0x4c8 show_stack+0x34/0x44 dump_stack_lvl+0xd8/0x118 print_address_description+0x30/0x2d8 kasan_report+0x158/0x198 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf4/0x180 _regmap_read+0xc4/0x278 _regmap_update_bits+0x130/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_digital_mute+0xec/0x140 Actually There is no need to have decimator with 32 bits. By limiting the variable with short type u8 issue is resolved. Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr(a)quicinc.com> --- sound/soc/codecs/lpass-tx-macro.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index bf27bdd5be20..473d3cd39554 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -242,7 +242,7 @@ enum { struct tx_mute_work { struct tx_macro *tx; - u32 decimator; + u8 decimator; struct delayed_work dwork; }; @@ -635,7 +635,7 @@ static int tx_macro_mclk_enable(struct tx_macro *tx, return 0; } -static bool is_amic_enabled(struct snd_soc_component *component, int decimator) +static bool is_amic_enabled(struct snd_soc_component *component, u8 decimator) { u16 adc_mux_reg, adc_reg, adc_n; @@ -849,7 +849,7 @@ static int tx_macro_enable_dec(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - unsigned int decimator; + u8 decimator; u16 tx_vol_ctl_reg, dec_cfg_reg, hpf_gate_reg, tx_gain_ctl_reg; u8 hpf_cut_off_freq; int hpf_delay = TX_MACRO_DMIC_HPF_DELAY_MS; @@ -1064,7 +1064,8 @@ static int tx_macro_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct snd_soc_component *component = dai->component; - u32 decimator, sample_rate; + u32 sample_rate; + u8 decimator; int tx_fs_rate; struct tx_macro *tx = snd_soc_component_get_drvdata(component); @@ -1128,7 +1129,7 @@ static int tx_macro_digital_mute(struct snd_soc_dai *dai, int mute, int stream) { struct snd_soc_component *component = dai->component; struct tx_macro *tx = snd_soc_component_get_drvdata(component); - u16 decimator; + u8 decimator; /* active decimator not set yet */ if (tx->active_decimator[dai->id] == -1) -- 2.17.1

2 1

[PATCH] ASoC: clarify that SND_SOC_IMX_SGTL5000 is the old driver
by Luca Ceresoli 06 Mar '23

06 Mar '23

Both SND_SOC_IMX_SGTL5000 and SND_SOC_FSL_ASOC_CARD implement the fsl,imx-audio-sgtl5000 compatible string, which is confusing. It took a little research to find out that the latter is much newer and it is supposed to be the preferred choice since several years. Add a clarification note to avoid wasting time for future readers. Signed-off-by: Luca Ceresoli <luca.ceresoli(a)bootlin.com> --- Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: Viorel Suman <viorel.suman(a)nxp.com> Cc: Shengjiu Wang <shengjiu.wang(a)nxp.com> Cc: alsa-devel(a)alsa-project.org Cc: linux-kernel(a)vger.kernel.org --- sound/soc/fsl/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 614eceda6b9e..33b67db8794e 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -294,6 +294,10 @@ config SND_SOC_IMX_SGTL5000 Say Y if you want to add support for SoC audio on an i.MX board with a sgtl5000 codec. + Note that this is an old driver. Consider enabling + SND_SOC_FSL_ASOC_CARD and SND_SOC_SGTL5000 to use the newer + driver. + config SND_SOC_IMX_SPDIF tristate "SoC Audio support for i.MX boards with S/PDIF" select SND_SOC_IMX_PCM_DMA -- 2.34.1

2 2

[PATCH] ASoC: qcom: q6prm: fix incorrect clk_root passed to ADSP
by Krzysztof Kozlowski 06 Mar '23

06 Mar '23

The second to last argument is clk_root (root of the clock), however the code called q6prm_request_lpass_clock() with clk_attr instead (copy-paste error). This effectively was passing value of 1 as root clock which worked on some of the SoCs (e.g. SM8450) but fails on others, depending on the ADSP. For example on SM8550 this "1" as root clock is not accepted and results in errors coming from ADSP. Fixes: 2f20640491ed ("ASoC: qdsp6: qdsp6: q6prm: handle clk disable correctly") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/qdsp6/q6prm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6prm.c b/sound/soc/qcom/qdsp6/q6prm.c index 8aa1a213bfb7..c1dc5bae715a 100644 --- a/sound/soc/qcom/qdsp6/q6prm.c +++ b/sound/soc/qcom/qdsp6/q6prm.c @@ -183,9 +183,9 @@ int q6prm_set_lpass_clock(struct device *dev, int clk_id, int clk_attr, int clk_ unsigned int freq) { if (freq) - return q6prm_request_lpass_clock(dev, clk_id, clk_attr, clk_attr, freq); + return q6prm_request_lpass_clock(dev, clk_id, clk_attr, clk_root, freq); - return q6prm_release_lpass_clock(dev, clk_id, clk_attr, clk_attr, freq); + return q6prm_release_lpass_clock(dev, clk_id, clk_attr, clk_root, freq); } EXPORT_SYMBOL_GPL(q6prm_set_lpass_clock); -- 2.34.1

3 2

Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
by Robin van der Gracht 06 Mar '23

06 Mar '23

> From: Rob Herring <robh(a)kernel.org> > Date: Tue, Feb 28, 2023 at 10:54 PM > Subject: [PATCH] dt-bindings: Fix SPI and I2C bus node names in > examples > To: Krzysztof Kozlowski <krzysztof.kozlowski+dt(a)linaro.org> > Cc: <devicetree(a)vger.kernel.org>, Miguel Ojeda <ojeda(a)kernel.org>, > Benson Leung <bleung(a)chromium.org>, Guenter Roeck > <groeck(a)chromium.org>, Stephen Boyd <sboyd(a)kernel.org>, Andrzej Hajda > <andrzej.hajda(a)intel.com>, Neil Armstrong <neil.armstrong(a)linaro.org>, > Robert Foss <rfoss(a)kernel.org>, Thierry Reding > <thierry.reding(a)gmail.com>, Sam Ravnborg <sam(a)ravnborg.org>, MyungJoo > Ham <myungjoo.ham(a)samsung.com>, Chanwoo Choi <cw00.choi(a)samsung.com>, > Linus Walleij <linus.walleij(a)linaro.org>, Bartosz Golaszewski > <brgl(a)bgdev.pl>, Pavel Machek <pavel(a)ucw.cz>, Lee Jones > <lee(a)kernel.org>, Mauro Carvalho Chehab <mchehab(a)kernel.org>, David S. > Miller <davem(a)davemloft.net>, Eric Dumazet <edumazet(a)google.com>, > Jakub Kicinski <kuba(a)kernel.org>, Paolo Abeni <pabeni(a)redhat.com>, > Wolfgang Grandegger <wg(a)grandegger.com>, Kalle Valo > <kvalo(a)kernel.org>, Sebastian Reichel <sre(a)kernel.org>, Mark Brown > <broonie(a)kernel.org>, Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>, > <linux-clk(a)vger.kernel.org>, <dri-devel(a)lists.freedesktop.org>, > <linux-gpio(a)vger.kernel.org>, <linux-i2c(a)vger.kernel.org>, > <linux-leds(a)vger.kernel.org>, <linux-media(a)vger.kernel.org>, > <netdev(a)vger.kernel.org>, <linux-can(a)vger.kernel.org>, > <linux-wireless(a)vger.kernel.org>, <linux-pm(a)vger.kernel.org>, > <alsa-devel(a)alsa-project.org>, <linux-usb(a)vger.kernel.org> > > > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: > > git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e > 's/i2c[0-9] {/i2c {/' > git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e > 's/spi[0-9] {/spi {/' > > With this, a few errors in examples were exposed and fixed. > > Signed-off-by: Rob Herring <robh(a)kernel.org> > --- > Cc: Miguel Ojeda <ojeda(a)kernel.org> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt(a)linaro.org> > Cc: Benson Leung <bleung(a)chromium.org> > Cc: Guenter Roeck <groeck(a)chromium.org> > Cc: Stephen Boyd <sboyd(a)kernel.org> > Cc: Andrzej Hajda <andrzej.hajda(a)intel.com> > Cc: Neil Armstrong <neil.armstrong(a)linaro.org> > Cc: Robert Foss <rfoss(a)kernel.org> > Cc: Thierry Reding <thierry.reding(a)gmail.com> > Cc: Sam Ravnborg <sam(a)ravnborg.org> > Cc: MyungJoo Ham <myungjoo.ham(a)samsung.com> > Cc: Chanwoo Choi <cw00.choi(a)samsung.com> > Cc: Linus Walleij <linus.walleij(a)linaro.org> > Cc: Bartosz Golaszewski <brgl(a)bgdev.pl> > Cc: Pavel Machek <pavel(a)ucw.cz> > Cc: Lee Jones <lee(a)kernel.org> > Cc: Mauro Carvalho Chehab <mchehab(a)kernel.org> > Cc: "David S. Miller" <davem(a)davemloft.net> > Cc: Eric Dumazet <edumazet(a)google.com> > Cc: Jakub Kicinski <kuba(a)kernel.org> > Cc: Paolo Abeni <pabeni(a)redhat.com> > Cc: Wolfgang Grandegger <wg(a)grandegger.com> > Cc: Kalle Valo <kvalo(a)kernel.org> > Cc: Sebastian Reichel <sre(a)kernel.org> > Cc: Mark Brown <broonie(a)kernel.org> > Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > Cc: linux-clk(a)vger.kernel.org > Cc: dri-devel(a)lists.freedesktop.org > Cc: linux-gpio(a)vger.kernel.org > Cc: linux-i2c(a)vger.kernel.org > Cc: linux-leds(a)vger.kernel.org > Cc: linux-media(a)vger.kernel.org > Cc: netdev(a)vger.kernel.org > Cc: linux-can(a)vger.kernel.org > Cc: linux-wireless(a)vger.kernel.org > Cc: linux-pm(a)vger.kernel.org > Cc: alsa-devel(a)alsa-project.org > Cc: linux-usb(a)vger.kernel.org > --- > .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +- .... > 86 files changed, 110 insertions(+), 103 deletions(-) > > diff --git > a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > index fc4873deb76f..286e726cd052 100644 > --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > @@ -72,7 +72,7 @@ examples: > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/input/input.h> > #include <dt-bindings/leds/common.h> > - i2c1 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; Acked-by: Robin van der Gracht <robin(a)protonic.nl>

1 0

[PATCH V5 0/8] Add SoundWire support for AMD platforms
by Vijendar Mukunda 06 Mar '23

06 Mar '23

ACP IP(v6.x) block has two SoundWire manager instance support. This patchset adds support for AMD SoundWire manager driver. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> changes since v4: - fix nit-picks in the code. - update naming convention for control word and response buffer vairables. - drop pm_suspend check in prepare callback. - use return statement instead of returning ret variable. changes since v3: - add usleep_range() in command/response implementation. - add usleep_range() in clock stop sequence. - modify usleep_range() values throughout the code. - remove unncessary debug statement from code. - update comment in probe() call. - fix timeout condition checks in the code. - drop "ret" variable in amd_disable_sdw_manager(). Changes since v2: - Remove useless variable initializations. - Add helper function to interpret peripheral status. - Move runtime pm sequence to probe_work workqueue. - Use string "SoundWire" instead of "soundwire" in code. - Update comments in interrupt handler and probe sequence. - Rename "sdw_lock" as "acp_sdw_lock". - Remove __func__ from dev_dbg statements. Changes since v1: - Drop asoc tree based patches. will send asoc patches as a separate series. - Fixed double space errors. - Use dev instead of pci->dev. - Use SoundWire manager terminology. - Remove amd_sdw_compute_slave_ports() function and use exported sdw_compute_slave_ports() function. - Remove unused variable "num_ports" from amd_manager structure. - Drop startup and shutdown dai callbacks. - Drop reset_page_addr callback. - Use relative address offset to program SoundWire manager registers throughout the code. - Separate wake enable interrupt handling from slave status handling logic. - Use acp_mmio to program ACP common registers. - Use dai_runtime_array implementation in dai_ops. - Refactor port_ops callbacks. - Add comments in port_ops callbacks. - Add retry count logic in irq thread to address faulty case. - Add helper function to interpret command response. - Add generic bandwidth allocation dependency in Kconfig options. - Add comments for AMD SoundWire power modes. - Add missing timeout check in amd_init_sdw_manager callback. - Declare frameshape parameters in probe call. - Handle error case in clock stop sequence. - Add comments in pm_prepare and pm_ops callbacks. Vijendar Mukunda (8): soundwire: export sdw_compute_slave_ports() function soundwire: amd: Add support for AMD Manager driver soundwire: amd: register SoundWire manager dai ops soundwire: amd: enable build for AMD SoundWire manager driver soundwire: amd: add SoundWire manager interrupt handling soundwire: amd: add runtime pm ops for AMD SoundWire manager driver soundwire: amd: handle SoundWire wake enable interrupt soundwire: amd: add pm_prepare callback and pm ops support drivers/soundwire/Kconfig | 10 + drivers/soundwire/Makefile | 4 + drivers/soundwire/amd_manager.c | 1324 +++++++++++++++++ drivers/soundwire/amd_manager.h | 275 ++++ drivers/soundwire/bus.h | 9 + .../soundwire/generic_bandwidth_allocation.c | 12 +- include/linux/soundwire/sdw_amd.h | 109 ++ 7 files changed, 1734 insertions(+), 9 deletions(-) create mode 100644 drivers/soundwire/amd_manager.c create mode 100644 drivers/soundwire/amd_manager.h create mode 100644 include/linux/soundwire/sdw_amd.h -- 2.34.1

3 10

[PATCH AUTOSEL 5.10 30/30] soundwire: cadence: Drain the RX FIFO after an IO timeout
by Sasha Levin 03 Mar '23

03 Mar '23

From: Richard Fitzgerald <rf(a)opensource.cirrus.com> [ Upstream commit 0603a47bd3a8f439d7844b841eee1819353063e0 ] If wait_for_completion_timeout() times-out in _cdns_xfer_msg() it is possible that something could have been written to the RX FIFO. In this case, we should drain the RX FIFO so that anything in it doesn't carry over and mess up the next transfer. Obviously, if we got to this state something went wrong, and we don't really know the state of everything. The cleanup in this situation cannot be bullet-proof but we should attempt to avoid breaking future transaction, if only to reduce the amount of error noise when debugging the failure from a kernel log. Note that this patch only implements the draining for blocking (non-deferred) transfers. The deferred API doesn't have any proper handling of error conditions and would need some re-design before implementing cleanup. That is a task for a separate patch... Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20221202161812.4186897-4-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/cadence_master.c | 50 ++++++++++++++++-------------- 1 file changed, 27 insertions(+), 23 deletions(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 292c4460eaaa3..18e7d158fcca4 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -511,6 +511,29 @@ cdns_fill_msg_resp(struct sdw_cdns *cdns, return SDW_CMD_OK; } +static void cdns_read_response(struct sdw_cdns *cdns) +{ + u32 num_resp, cmd_base; + int i; + + /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ + BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); + + num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); + num_resp &= CDNS_MCP_RX_FIFO_AVAIL; + if (num_resp > ARRAY_SIZE(cdns->response_buf)) { + dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); + num_resp = ARRAY_SIZE(cdns->response_buf); + } + + cmd_base = CDNS_MCP_CMD_BASE; + + for (i = 0; i < num_resp; i++) { + cdns->response_buf[i] = cdns_readl(cdns, cmd_base); + cmd_base += CDNS_MCP_CMD_WORD_LEN; + } +} + static enum sdw_command_response _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, int offset, int count, bool defer) @@ -552,6 +575,10 @@ _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, dev_err(cdns->dev, "IO transfer timed out, cmd %d device %d addr %x len %d\n", cmd, msg->dev_num, msg->addr, msg->len); msg->len = 0; + + /* Drain anything in the RX_FIFO */ + cdns_read_response(cdns); + return SDW_CMD_TIMEOUT; } @@ -720,29 +747,6 @@ EXPORT_SYMBOL(cdns_reset_page_addr); * IRQ handling */ -static void cdns_read_response(struct sdw_cdns *cdns) -{ - u32 num_resp, cmd_base; - int i; - - /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ - BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); - - num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); - num_resp &= CDNS_MCP_RX_FIFO_AVAIL; - if (num_resp > ARRAY_SIZE(cdns->response_buf)) { - dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); - num_resp = ARRAY_SIZE(cdns->response_buf); - } - - cmd_base = CDNS_MCP_CMD_BASE; - - for (i = 0; i < num_resp; i++) { - cdns->response_buf[i] = cdns_readl(cdns, cmd_base); - cmd_base += CDNS_MCP_CMD_WORD_LEN; - } -} - static int cdns_update_slave_status(struct sdw_cdns *cdns, u32 slave0, u32 slave1) { -- 2.39.2

1 0

[PATCH AUTOSEL 5.10 29/30] soundwire: cadence: Remove wasted space in response_buf
by Sasha Levin 03 Mar '23

03 Mar '23

From: Richard Fitzgerald <rf(a)opensource.cirrus.com> [ Upstream commit 827c32d0df4bbe0d1c47d79f6a5eabfe9ac75216 ] The response_buf was declared much larger (128 entries) than the number of responses that could ever be written into it. The Cadence IP is configurable up to a maximum of 32 entries, and the datasheet says that RX_FIFO_AVAIL can be 2 larger than this. So allow up to 34 responses. Also add checking in cdns_read_response() to prevent overflowing reponse_buf if RX_FIFO_AVAIL contains an unexpectedly large number. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20221202161812.4186897-3-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/cadence_master.c | 7 +++++++ drivers/soundwire/cadence_master.h | 13 ++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index a3247692ddc07..292c4460eaaa3 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -725,8 +725,15 @@ static void cdns_read_response(struct sdw_cdns *cdns) u32 num_resp, cmd_base; int i; + /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ + BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); + num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); num_resp &= CDNS_MCP_RX_FIFO_AVAIL; + if (num_resp > ARRAY_SIZE(cdns->response_buf)) { + dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); + num_resp = ARRAY_SIZE(cdns->response_buf); + } cmd_base = CDNS_MCP_CMD_BASE; diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index 4d1aab5b5ec2d..e7f0108d417ca 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -8,6 +8,12 @@ #define SDW_CADENCE_GSYNC_KHZ 4 /* 4 kHz */ #define SDW_CADENCE_GSYNC_HZ (SDW_CADENCE_GSYNC_KHZ * 1000) +/* + * The Cadence IP supports up to 32 entries in the FIFO, though implementations + * can configure the IP to have a smaller FIFO. + */ +#define CDNS_MCP_IP_MAX_CMD_LEN 32 + /** * struct sdw_cdns_pdi: PDI (Physical Data Interface) instance * @@ -119,7 +125,12 @@ struct sdw_cdns { struct sdw_bus bus; unsigned int instance; - u32 response_buf[0x80]; + /* + * The datasheet says the RX FIFO AVAIL can be 2 entries more + * than the FIFO capacity, so allow for this. + */ + u32 response_buf[CDNS_MCP_IP_MAX_CMD_LEN + 2]; + struct completion tx_complete; struct sdw_defer *defer; -- 2.39.2

1 0

[PATCH AUTOSEL 5.15 50/50] soundwire: cadence: Drain the RX FIFO after an IO timeout
by Sasha Levin 03 Mar '23

03 Mar '23

From: Richard Fitzgerald <rf(a)opensource.cirrus.com> [ Upstream commit 0603a47bd3a8f439d7844b841eee1819353063e0 ] If wait_for_completion_timeout() times-out in _cdns_xfer_msg() it is possible that something could have been written to the RX FIFO. In this case, we should drain the RX FIFO so that anything in it doesn't carry over and mess up the next transfer. Obviously, if we got to this state something went wrong, and we don't really know the state of everything. The cleanup in this situation cannot be bullet-proof but we should attempt to avoid breaking future transaction, if only to reduce the amount of error noise when debugging the failure from a kernel log. Note that this patch only implements the draining for blocking (non-deferred) transfers. The deferred API doesn't have any proper handling of error conditions and would need some re-design before implementing cleanup. That is a task for a separate patch... Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20221202161812.4186897-4-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/cadence_master.c | 50 ++++++++++++++++-------------- 1 file changed, 27 insertions(+), 23 deletions(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index b229e1e0d7d97..842e08c56796b 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -555,6 +555,29 @@ cdns_fill_msg_resp(struct sdw_cdns *cdns, return SDW_CMD_OK; } +static void cdns_read_response(struct sdw_cdns *cdns) +{ + u32 num_resp, cmd_base; + int i; + + /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ + BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); + + num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); + num_resp &= CDNS_MCP_RX_FIFO_AVAIL; + if (num_resp > ARRAY_SIZE(cdns->response_buf)) { + dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); + num_resp = ARRAY_SIZE(cdns->response_buf); + } + + cmd_base = CDNS_MCP_CMD_BASE; + + for (i = 0; i < num_resp; i++) { + cdns->response_buf[i] = cdns_readl(cdns, cmd_base); + cmd_base += CDNS_MCP_CMD_WORD_LEN; + } +} + static enum sdw_command_response _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, int offset, int count, bool defer) @@ -596,6 +619,10 @@ _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, dev_err(cdns->dev, "IO transfer timed out, cmd %d device %d addr %x len %d\n", cmd, msg->dev_num, msg->addr, msg->len); msg->len = 0; + + /* Drain anything in the RX_FIFO */ + cdns_read_response(cdns); + return SDW_CMD_TIMEOUT; } @@ -764,29 +791,6 @@ EXPORT_SYMBOL(cdns_reset_page_addr); * IRQ handling */ -static void cdns_read_response(struct sdw_cdns *cdns) -{ - u32 num_resp, cmd_base; - int i; - - /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ - BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); - - num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); - num_resp &= CDNS_MCP_RX_FIFO_AVAIL; - if (num_resp > ARRAY_SIZE(cdns->response_buf)) { - dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); - num_resp = ARRAY_SIZE(cdns->response_buf); - } - - cmd_base = CDNS_MCP_CMD_BASE; - - for (i = 0; i < num_resp; i++) { - cdns->response_buf[i] = cdns_readl(cdns, cmd_base); - cmd_base += CDNS_MCP_CMD_WORD_LEN; - } -} - static int cdns_update_slave_status(struct sdw_cdns *cdns, u64 slave_intstat) { -- 2.39.2

1 0

[PATCH AUTOSEL 5.15 49/50] soundwire: cadence: Remove wasted space in response_buf
by Sasha Levin 03 Mar '23

03 Mar '23

From: Richard Fitzgerald <rf(a)opensource.cirrus.com> [ Upstream commit 827c32d0df4bbe0d1c47d79f6a5eabfe9ac75216 ] The response_buf was declared much larger (128 entries) than the number of responses that could ever be written into it. The Cadence IP is configurable up to a maximum of 32 entries, and the datasheet says that RX_FIFO_AVAIL can be 2 larger than this. So allow up to 34 responses. Also add checking in cdns_read_response() to prevent overflowing reponse_buf if RX_FIFO_AVAIL contains an unexpectedly large number. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20221202161812.4186897-3-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/cadence_master.c | 7 +++++++ drivers/soundwire/cadence_master.h | 13 ++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 18d2f9b3e2010..b229e1e0d7d97 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -769,8 +769,15 @@ static void cdns_read_response(struct sdw_cdns *cdns) u32 num_resp, cmd_base; int i; + /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ + BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); + num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); num_resp &= CDNS_MCP_RX_FIFO_AVAIL; + if (num_resp > ARRAY_SIZE(cdns->response_buf)) { + dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); + num_resp = ARRAY_SIZE(cdns->response_buf); + } cmd_base = CDNS_MCP_CMD_BASE; diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index e587aede63bf0..e437a604429fa 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -8,6 +8,12 @@ #define SDW_CADENCE_GSYNC_KHZ 4 /* 4 kHz */ #define SDW_CADENCE_GSYNC_HZ (SDW_CADENCE_GSYNC_KHZ * 1000) +/* + * The Cadence IP supports up to 32 entries in the FIFO, though implementations + * can configure the IP to have a smaller FIFO. + */ +#define CDNS_MCP_IP_MAX_CMD_LEN 32 + /** * struct sdw_cdns_pdi: PDI (Physical Data Interface) instance * @@ -119,7 +125,12 @@ struct sdw_cdns { struct sdw_bus bus; unsigned int instance; - u32 response_buf[0x80]; + /* + * The datasheet says the RX FIFO AVAIL can be 2 entries more + * than the FIFO capacity, so allow for this. + */ + u32 response_buf[CDNS_MCP_IP_MAX_CMD_LEN + 2]; + struct completion tx_complete; struct sdw_defer *defer; -- 2.39.2

1 0