- Alsa-devel - mailman.alsa-project.org

[PATCH V2 1/2] ASoC: dt-bindings: max98388: add amplifier driver
by “Ryan 13 Jun '23

13 Jun '23

From: Ryan Lee <ryans.lee(a)analog.com> Add dt-bindings information for Analog Devices MAX98388 I2S Amplifier Signed-off-by: Ryan Lee <ryans.lee(a)analog.com> --- Changes from v1: Removed unnecessary blank line and description. Modified quotes. .../bindings/sound/adi,max98388.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/adi,max98388.yaml diff --git a/Documentation/devicetree/bindings/sound/adi,max98388.yaml b/Documentation/devicetree/bindings/sound/adi,max98388.yaml new file mode 100644 index 000000000000..93ccd5905736 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,max98388.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,max98388.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX98388 Speaker Amplifier + +maintainers: + - Ryan Lee <ryans.lee(a)analog.com> + +description: + The MAX98388 is a mono Class-D speaker amplifier with I/V feedback. + The device provides a PCM interface for audio data and a standard + I2C interface for control data communication. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - adi,max98388 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + adi,vmon-slot-no: + description: slot number of the voltage feedback monitor + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + + adi,imon-slot-no: + description: slot number of the current feedback monitor + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 1 + + adi,interleave-mode: + description: + For cases where a single combined channel for the I/V feedback data + is not sufficient, the device can also be configured to share + a single data output channel on alternating frames. + In this configuration, the current and voltage data will be frame + interleaved on a single output channel. + type: boolean + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98388: amplifier@39 { + compatible = "adi,max98388"; + reg = <0x39>; + #sound-dai-cells = <0>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + adi,interleave-mode; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; base-commit: 53ab6975c12d1ad86c599a8927e8c698b144d669 -- 2.34.1

3 4

[PATCH 00/36] ALSA: Add MIDI 2.0 support
by Takashi Iwai 13 Jun '23

13 Jun '23

Hi, this is a (largish) patch set for adding the support of MIDI 2.0 functionality, mainly targeted for USB devices. MIDI 2.0 is a complete overhaul of the 40-years old MIDI 1.0. Unlike MIDI 1.0 byte stream, MIDI 2.0 uses packets in 32bit words for Universal MIDI Packet (UMP) protocol. It supports both MIDI 1.0 commands for compatibility and the extended MIDI 2.0 commands for higher resolutions and more functions. For supporting the UMP, the patch set extends the existing ALSA rawmidi and sequencer interfaces, and adds the USB MIDI 2.0 support to the standard USB-audio driver. The rawmidi for UMP has a different device name (/dev/snd/umpC*D*) and it reads/writes UMP packet data in 32bit CPU-native endianness. For the old MIDI 1.0 applications, the legacy rawmidi interface is provided, too. As default, USB-audio driver will take the alternate setting for MIDI 2.0 interface, and the compatibility with MIDI 1.0 is provided via the rawmidi common layer. However, user may let the driver falling back to the old MIDI 1.0 interface by a module option, too. A UMP-capable rawmidi device can create the corresponding ALSA sequencer client(s) to support the UMP Endpoint and UMP Group connections. As a nature of ALSA sequencer, arbitrary connections between clients/ports are allowed, and the ALSA sequencer core performs the automatic conversions for the connections between a new UMP sequencer client and a legacy MIDI 1.0 sequencer client. It allows the existing application to use MIDI 2.0 devices without changes. The MIDI-CI, which is another major extension in MIDI 2.0, isn't covered by this patch set. It would be implemented rather in user-space. Roughly speaking, the first half of this patch set is for extending the rawmidi and USB-audio, and the second half is for extending the ALSA sequencer interface. The patch set is based on 6.4-rc2 kernel, but all patches can be cleanly applicable on 6.2 and 6.3 kernels, too (while 6.1 and older kernels would need minor adjustment for uapi header changes). The updates for alsa-lib and alsa-utils will follow shortly later. The author thanks members of MIDI Association OS/API Working Group, especially Andrew Mee, for great helps for the initial design and debugging / testing the drivers. Takashi --- Takashi Iwai (36): ALSA: rawmidi: Pass rawmidi directly to snd_rawmidi_kernel_open() ALSA: rawmidi: Add ioctl callback to snd_rawmidi_global_ops ALSA: rawmidi: UMP support ALSA: rawmidi: Skip UMP devices at SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE ALSA: ump: Additional proc output ALSA: usb-audio: Manage number of rawmidis globally ALSA: usb-audio: Define USB MIDI 2.0 specs ALSA: usb-audio: USB MIDI 2.0 UMP support ALSA: usb-audio: Get UMP EP name string from USB interface ALSA: usb-audio: Trim superfluous "MIDI" suffix from UMP EP name ALSA: usb-audio: Create UMP blocks from USB MIDI GTBs ALSA: ump: Redirect rawmidi substream access via own helpers ALSA: ump: Add legacy raw MIDI support ALSA: usb-audio: Enable the legacy raw MIDI support ALSA: usb-audio: Inform inconsistent protocols in GTBs ALSA: seq: Clear padded bytes at expanding events ALSA: seq: Add snd_seq_expand_var_event_at() helper ALSA: seq: Treat snd_seq_client object directly in client drivers ALSA: seq: Drop dead code for the old broadcast support ALSA: seq: Check the conflicting port at port creation ALSA: seq: Check validity before creating a port object ALSA: seq: Prohibit creating ports with special numbers ALSA: seq: Introduce SNDRV_SEQ_IOCTL_USER_PVERSION ioctl ALSA: seq: Add UMP support ALSA: seq: Add port inactive flag ALSA: seq: Support MIDI 2.0 UMP Endpoint port ALSA: seq: Add port direction to snd_seq_port_info ALSA: seq: Add UMP group number to snd_seq_port_info ALSA: seq: Automatic conversion of UMP events ALSA: seq: Allow suppressing UMP conversions ALSA: seq: Bind UMP device ALSA: seq: ump: Create UMP Endpoint port for broadcast ALSA: seq: Add ioctls for client UMP info query and setup ALSA: seq: Print UMP Endpoint and Block information in proc outputs ALSA: seq: Add UMP group filter ALSA: docs: Add MIDI 2.0 documentation Documentation/sound/designs/index.rst | 1 + Documentation/sound/designs/midi-2.0.rst | 342 ++++++ include/linux/usb/midi-v2.h | 94 ++ include/sound/asequencer.h | 4 + include/sound/rawmidi.h | 16 +- include/sound/seq_device.h | 1 + include/sound/seq_kernel.h | 10 + include/sound/ump.h | 175 ++++ include/sound/ump_msg.h | 540 ++++++++++ include/uapi/sound/asequencer.h | 83 +- include/uapi/sound/asound.h | 58 +- sound/core/Kconfig | 13 + sound/core/Makefile | 3 + sound/core/rawmidi.c | 233 +++-- sound/core/rawmidi_compat.c | 4 + sound/core/seq/Kconfig | 14 + sound/core/seq/Makefile | 3 + sound/core/seq/seq_clientmgr.c | 577 +++++++---- sound/core/seq/seq_clientmgr.h | 27 +- sound/core/seq/seq_compat.c | 3 + sound/core/seq/seq_dummy.c | 9 + sound/core/seq/seq_memory.c | 98 +- sound/core/seq/seq_memory.h | 19 +- sound/core/seq/seq_midi.c | 12 +- sound/core/seq/seq_ports.c | 46 +- sound/core/seq/seq_ports.h | 23 +- sound/core/seq/seq_ump_client.c | 464 +++++++++ sound/core/seq/seq_ump_convert.c | 1203 ++++++++++++++++++++++ sound/core/seq/seq_ump_convert.h | 22 + sound/core/seq/seq_virmidi.c | 1 + sound/core/ump.c | 677 ++++++++++++ sound/core/ump_convert.c | 520 ++++++++++ sound/core/ump_convert.h | 43 + sound/usb/Kconfig | 11 + sound/usb/Makefile | 1 + sound/usb/card.c | 12 +- sound/usb/midi.c | 7 +- sound/usb/midi.h | 5 +- sound/usb/midi2.c | 1189 +++++++++++++++++++++ sound/usb/midi2.h | 33 + sound/usb/quirks.c | 8 +- sound/usb/usbaudio.h | 2 + 42 files changed, 6274 insertions(+), 332 deletions(-) create mode 100644 Documentation/sound/designs/midi-2.0.rst create mode 100644 include/linux/usb/midi-v2.h create mode 100644 include/sound/ump.h create mode 100644 include/sound/ump_msg.h create mode 100644 sound/core/seq/seq_ump_client.c create mode 100644 sound/core/seq/seq_ump_convert.c create mode 100644 sound/core/seq/seq_ump_convert.h create mode 100644 sound/core/ump.c create mode 100644 sound/core/ump_convert.c create mode 100644 sound/core/ump_convert.h create mode 100644 sound/usb/midi2.c create mode 100644 sound/usb/midi2.h -- 2.35.3

4 85

[PATCH 0/9] ALSA: emu10k1: improvements related to the switchable word clock of E-MU cards
by Oswald Buddenhagen 13 Jun '23

13 Jun '23

Oswald Buddenhagen (9): ALSA: emu10k1: split off E-MU fallback clock from clock source ALSA: emu10k1: make available E-MU clock sources card-specific ALSA: emu10k1: query rate of external clock sources on E-MU cards ALSA: emu10k1: fix sample rates for E-MU cards at 44.1 kHz word clock ALSA: emu10k1: fix synthesizer pitch for E-MU cards at 44.1 kHz ALSA: timer: minimize open-coded access to hw.resolution ALSA: emu10k1: fix timer for E-MU cards at 44.1 kHz word clock ALSA: emu10k1: add support for 12 kHz capture on Audigy ALSA: emu10k1: actually show some S/PDIF status in /proc for E-MU cards include/sound/emu10k1.h | 11 +- include/sound/emux_synth.h | 2 +- sound/core/timer.c | 18 +- sound/pci/emu10k1/emu10k1_callback.c | 10 ++ sound/pci/emu10k1/emu10k1_main.c | 7 +- sound/pci/emu10k1/emu10k1_synth.c | 1 - sound/pci/emu10k1/emumixer.c | 242 ++++++++++++++++----------- sound/pci/emu10k1/emupcm.c | 125 +++++++------- sound/pci/emu10k1/emuproc.c | 51 +++--- sound/pci/emu10k1/io.c | 72 ++++++++ sound/pci/emu10k1/timer.c | 20 ++- sound/synth/emux/emux_synth.c | 3 +- 12 files changed, 374 insertions(+), 188 deletions(-) -- 2.40.0.152.g15d061e6df

2 10

[PATCH v5 4/4] ASoC: dt-bindings: Add tas2781 amplifier
by Shenghao Ding 13 Jun '23

13 Jun '23

Create tas2781.yaml for tas2781 driver. Signed-off-by: Shenghao Ding <13916275206(a)139.com> --- Changes in v5: - remove ti,broadcast-addr - remove address-cells - remove size-cells - put compatible item first in properties - change the maxItems of reg from 4 to 8 - remove white space around <> - correct the reg format to <0x38>, <0x3a> etc - remove '\t' in the file - correct a comment in the example --- .../devicetree/bindings/sound/ti,tas2781.yaml | 73 +++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml new file mode 100644 index 000000000000..61db14a39630 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TAS2781 SmartAMP + +maintainers: + - Shenghao Ding <shenghao-ding(a)ti.com> + +description: + The TAS2781 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. Integrated an on-chip DSP supports Texas Instruments + Smart Amp speaker protection algorithm. The integrated speaker + voltage and current sense provides for real time + monitoring of loudspeaker behavior. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - ti,tas2781 + + reg: + description: + I2C address, in multiple tas2781s case, all the i2c address + aggreate as one Audio Device to support multiple audio slots. + maxItems: 8 + items: + minimum: 0x38 + maximum: 0x3f + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + /* example with quad tas2781s, such as tablet or pad device */ + #address-cells = <1>; + #size-cells = <0>; + quad: codec@38 { + compatible = "ti,tas2781"; + reg = <0x38>, /* Audio slot 0 */ + <0x3a>, /* Audio slot 1 */ + <0x39>, /* Audio slot 2 */ + <0x3b>; /* Audio slot 3 */ + + #sound-dai-cells = <1>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio1>; + interrupts = <15>; + }; + }; +... -- 2.34.1

3 3

Alsa without support to usb headphone
by GitHub issues - opened 12 Jun '23

12 Jun '23

alsa-project/alsa-lib issue #326 was opened from wellinton-capixaba: Hello. O recently built a media player (mplayer) with alsa support. However, telling mplayer to play multimedia files with alsa, specifying the usb headphone as the output device, didn't work. However, latter I built another mplayer, this time using the system provided Also. Then I redid the test, and it worked as I originally expected. The only difference I am aware between both also as is their version. The one I built it is the 1.0.17, while the system uses a 1.0.21. Can be this the cause of the problem. Or is something else? Issue URL : https://github.com/alsa-project/alsa-lib/issues/326 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH 00/12] ASoC: Intel: avs: remove redundant dapm routes
by Brent Lu 12 Jun '23

12 Jun '23

This patch series remove redundant dapm routes declared in multiple machine drivers. These routes will be created by snd_soc_dapm_connect_dai_link_widgets() during soundcard initialization. Following is the kernel log from a KBL chromebook nocturne. dmic: [ 13.773455] avs_dmic avs_dmic: connected DAI link dmic-codec:Capture -> dmic-platform:DMIC Rx [ 13.773460] avs_dmic avs_dmic: connected DAI link dmic-codec:Capture -> dmic-platform:DMIC WoV Rx max98373: [ 14.079536] avs_max98373 avs_max98373.1: connected DAI link avs_max98373.1-platform:ssp0 Tx -> i2c-MX98373:00:Right HiFi Playback [ 14.079545] avs_max98373 avs_max98373.1: connected DAI link i2c-MX98373:00:Right HiFi Capture -> avs_max98373.1-platform:ssp0 Rx [ 14.079550] avs_max98373 avs_max98373.1: connected DAI link avs_max98373.1-platform:ssp0 Tx -> i2c-MX98373:01:Left HiFi Playback [ 14.079554] avs_max98373 avs_max98373.1: connected DAI link i2c-MX98373:01:Left HiFi Capture -> avs_max98373.1-platform:ssp0 Rx hdaudio: [ 14.094818] avs_hdaudio avs_hdaudio.2: connected DAI link hdaudioB0D2-platform:hdaudioB0D2-cpu0 Tx -> hdaudioB0D2:HDMI 0 Playback [ 14.094824] avs_hdaudio avs_hdaudio.2: connected DAI link hdaudioB0D2-platform:hdaudioB0D2-cpu1 Tx -> hdaudioB0D2:HDMI 1 Playback [ 14.094828] avs_hdaudio avs_hdaudio.2: connected DAI link hdaudioB0D2-platform:hdaudioB0D2-cpu2 Tx -> hdaudioB0D2:HDMI 2 Playback Brent Lu (12): ASoC: Intel: avs-da7219: remove redundant dapm routes ASoC: Intel: avs-dmic: remove redundant dapm routes ASoC: Intel: avs-hdaudio: remove redundant dapm routes ASoC: Intel: avs-max98357a: remove redundant dapm routes ASoC: Intel: avs-max98373: remove redundant dapm routes ASoC: Intel: avs-max98927: remove redundant dapm routes ASoC: Intel: avs-nau8825: remove redundant dapm routes ASoC: Intel: avs-rt274: remove redundant dapm routes ASoC: Intel: avs-rt286: remove redundant dapm routes ASoC: Intel: avs-rt298: remove redundant dapm routes ASoC: Intel: avs-rt5682: remove redundant dapm routes ASoC: Intel: avs-ssm4567: remove redundant dapm routes sound/soc/intel/avs/boards/da7219.c | 45 ++---------------- sound/soc/intel/avs/boards/dmic.c | 2 - sound/soc/intel/avs/boards/hdaudio.c | 65 +------------------------- sound/soc/intel/avs/boards/max98357a.c | 39 ++-------------- sound/soc/intel/avs/boards/max98373.c | 45 ++---------------- sound/soc/intel/avs/boards/max98927.c | 45 ++---------------- sound/soc/intel/avs/boards/nau8825.c | 45 ++---------------- sound/soc/intel/avs/boards/rt274.c | 45 ++---------------- sound/soc/intel/avs/boards/rt286.c | 45 ++---------------- sound/soc/intel/avs/boards/rt298.c | 45 ++---------------- sound/soc/intel/avs/boards/rt5682.c | 45 ++---------------- sound/soc/intel/avs/boards/ssm4567.c | 57 ++-------------------- 12 files changed, 31 insertions(+), 492 deletions(-) -- 2.34.1

2 13

[PATCH] ASoC: audio-graph-card2-custom-sample.dtsi: remove DT warning
by Kuninori Morimoto 12 Jun '23

12 Jun '23

Current audio-graph-card2-custom-sample.dtsi is missing address-cells / size-cells / reg. Thus it get too many DT warnings. This patch solved it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- .../audio-graph-card2-custom-sample.dtsi | 151 ++++++++++++------ 1 file changed, 101 insertions(+), 50 deletions(-) diff --git a/sound/soc/generic/audio-graph-card2-custom-sample.dtsi b/sound/soc/generic/audio-graph-card2-custom-sample.dtsi index f5e7d669da45..2ac0de3c21da 100644 --- a/sound/soc/generic/audio-graph-card2-custom-sample.dtsi +++ b/sound/soc/generic/audio-graph-card2-custom-sample.dtsi @@ -172,83 +172,127 @@ &c2c_m >; multi { + #address-cells = <1>; + #size-cells = <0>; + ports@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; /* [Multi-CPU] */ - mcpu0: port@0 { mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; - port@1 { mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; - port@2 { mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; + mcpu0: port@0 { reg = <0>; mcpu0_ep: endpoint { remote-endpoint = <&mcodec0_ep>; }; }; + port@1 { reg = <1>; mcpu1_ep: endpoint { remote-endpoint = <&cpu1_ep>; }; }; + port@2 { reg = <2>; mcpu2_ep: endpoint { remote-endpoint = <&cpu2_ep>; }; }; }; /* [Multi-Codec] */ ports@1 { - port@0 { mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; - port@1 { mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; - port@2 { mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; mcodec0_ep: endpoint { remote-endpoint = <&mcpu0_ep>; }; }; + port@1 { reg = <1>; mcodec1_ep: endpoint { remote-endpoint = <&codec1_ep>; }; }; + port@2 { reg = <2>; mcodec2_ep: endpoint { remote-endpoint = <&codec2_ep>; }; }; }; /* [DPCM-Multi]::BE */ ports@2 { - port@0 { mbe_ep: endpoint { remote-endpoint = <&be10_ep>; }; }; - port@1 { mbe1_ep: endpoint { remote-endpoint = <&codec4_ep>; }; }; - port@2 { mbe2_ep: endpoint { remote-endpoint = <&codec5_ep>; }; }; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; mbe_ep: endpoint { remote-endpoint = <&be10_ep>; }; }; + port@1 { reg = <1>; mbe1_ep: endpoint { remote-endpoint = <&codec4_ep>; }; }; + port@2 { reg = <2>; mbe2_ep: endpoint { remote-endpoint = <&codec5_ep>; }; }; }; /* [Codec2Codec-Multi]::CPU */ ports@3 { - port@0 { mc2c0_ep: endpoint { remote-endpoint = <&c2cmf_ep>; }; }; - port@1 { mc2c00_ep: endpoint { remote-endpoint = <&codec8_ep>; }; }; - port@2 { mc2c01_ep: endpoint { remote-endpoint = <&codec9_ep>; }; }; + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; mc2c0_ep: endpoint { remote-endpoint = <&c2cmf_ep>; }; }; + port@1 { reg = <1>; mc2c00_ep: endpoint { remote-endpoint = <&codec8_ep>; }; }; + port@2 { reg = <2>; mc2c01_ep: endpoint { remote-endpoint = <&codec9_ep>; }; }; }; /* [Codec2Codec-Multi]::Codec */ ports@4 { - port@0 { mc2c1_ep: endpoint { remote-endpoint = <&c2cmb_ep>; }; }; - port@1 { mc2c10_ep: endpoint { remote-endpoint = <&codec10_ep>; }; }; - port@2 { mc2c11_ep: endpoint { remote-endpoint = <&codec11_ep>; }; }; + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; mc2c1_ep: endpoint { remote-endpoint = <&c2cmb_ep>; }; }; + port@1 { reg = <1>; mc2c10_ep: endpoint { remote-endpoint = <&codec10_ep>; }; }; + port@2 { reg = <2>; mc2c11_ep: endpoint { remote-endpoint = <&codec11_ep>; }; }; }; /* [Semi-Multi] */ ports@5 { - port@0 { smcodec0_ep: endpoint { remote-endpoint = <&cpu7_ep>; }; }; - port@1 { smcodec1_ep: endpoint { remote-endpoint = <&codec12_ep>; }; }; - port@2 { smcodec2_ep: endpoint { remote-endpoint = <&codec13_ep>; }; }; + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; smcodec0_ep: endpoint { remote-endpoint = <&cpu7_ep>; }; }; + port@1 { reg = <1>; smcodec1_ep: endpoint { remote-endpoint = <&codec12_ep>; }; }; + port@2 { reg = <2>; smcodec2_ep: endpoint { remote-endpoint = <&codec13_ep>; }; }; }; }; dpcm { + #address-cells = <1>; + #size-cells = <0>; + ports@0 { + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; /* [DPCM]::FE */ - fe00: port@0 { fe00_ep: endpoint { remote-endpoint = <&cpu3_ep>; }; }; - fe01: port@1 { fe01_ep: endpoint { remote-endpoint = <&cpu4_ep>; }; }; + fe00: port@0 { reg = <0>; fe00_ep: endpoint { remote-endpoint = <&cpu3_ep>; }; }; + fe01: port@1 { reg = <1>; fe01_ep: endpoint { remote-endpoint = <&cpu4_ep>; }; }; /* [DPCM-Multi]::FE */ - fe10: port@2 { fe10_ep: endpoint { remote-endpoint = <&cpu5_ep>; }; }; - fe11: port@3 { fe11_ep: endpoint { remote-endpoint = <&cpu6_ep>; }; }; + fe10: port@2 { reg = <2>; fe10_ep: endpoint { remote-endpoint = <&cpu5_ep>; }; }; + fe11: port@3 { reg = <3>; fe11_ep: endpoint { remote-endpoint = <&cpu6_ep>; }; }; }; ports@1 { + reg = <1>; + + #address-cells = <1>; + #size-cells = <0>; /* [DPCM]::BE */ - be0: port@0 { be00_ep: endpoint { remote-endpoint = <&codec3_ep>; }; }; + be0: port@0 { reg = <0>; be00_ep: endpoint { remote-endpoint = <&codec3_ep>; }; }; /* [DPCM-Multi]::BE */ - be1: port@1 { be10_ep: endpoint { remote-endpoint = <&mbe_ep>; }; }; + be1: port@1 { reg = <1>; be10_ep: endpoint { remote-endpoint = <&mbe_ep>; }; }; }; }; codec2codec { + #address-cells = <1>; + #size-cells = <0>; /* [Codec2Codec] */ ports@0 { + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + /* use default settings */ - c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec6_ep>; }; }; - port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec7_ep>; }; }; + c2c: port@0 { reg = <0>; c2cf_ep: endpoint { remote-endpoint = <&codec6_ep>; }; }; + port@1 { reg = <1>; c2cb_ep: endpoint { remote-endpoint = <&codec7_ep>; }; }; }; /* [Codec2Codec-Multi] */ ports@1 { + reg = <1>; + + #address-cells = <1>; + #size-cells = <0>; + /* use original settings */ rate = <48000>; - c2c_m: port@0 { c2cmf_ep: endpoint { remote-endpoint = <&mc2c0_ep>; }; }; - port@1 { c2cmb_ep: endpoint { remote-endpoint = <&mc2c1_ep>; }; }; + c2c_m: port@0 { reg = <0>; c2cmf_ep: endpoint { remote-endpoint = <&mc2c0_ep>; }; }; + port@1 { reg = <1>; c2cmb_ep: endpoint { remote-endpoint = <&mc2c1_ep>; }; }; }; }; }; @@ -264,25 +308,28 @@ test_cpu { */ compatible = "test-cpu"; ports { + #address-cells = <1>; + #size-cells = <0>; + bitclock-master; frame-master; /* [Normal] */ - cpu0: port@0 { cpu0_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; + cpu0: port@0 { reg = <0>; cpu0_ep: endpoint { remote-endpoint = <&codec0_ep>; }; }; /* [Multi-CPU] */ - port@1 { cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; - port@2 { cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; + port@1 { reg = <1>; cpu1_ep: endpoint { remote-endpoint = <&mcpu1_ep>; }; }; + port@2 { reg = <2>; cpu2_ep: endpoint { remote-endpoint = <&mcpu2_ep>; }; }; /* [DPCM]::FE */ - port@3 { cpu3_ep: endpoint { remote-endpoint = <&fe00_ep>; }; }; - port@4 { cpu4_ep: endpoint { remote-endpoint = <&fe01_ep>; }; }; + port@3 { reg = <3>; cpu3_ep: endpoint { remote-endpoint = <&fe00_ep>; }; }; + port@4 { reg = <4>; cpu4_ep: endpoint { remote-endpoint = <&fe01_ep>; }; }; /* [DPCM-Multi]::FE */ - port@5 { cpu5_ep: endpoint { remote-endpoint = <&fe10_ep>; }; }; - port@6 { cpu6_ep: endpoint { remote-endpoint = <&fe11_ep>; }; }; + port@5 { reg = <5>; cpu5_ep: endpoint { remote-endpoint = <&fe10_ep>; }; }; + port@6 { reg = <6>; cpu6_ep: endpoint { remote-endpoint = <&fe11_ep>; }; }; /* [Semi-Multi] */ - sm0: port@7 { cpu7_ep: endpoint { remote-endpoint = <&smcodec0_ep>; }; }; + sm0: port@7 { reg = <7>; cpu7_ep: endpoint { remote-endpoint = <&smcodec0_ep>; }; }; }; }; @@ -297,6 +344,9 @@ test_codec { */ compatible = "test-codec"; ports { + #address-cells = <1>; + #size-cells = <0>; + /* * prefix can be added to *component*, * see audio-graph-card2::routing @@ -304,39 +354,40 @@ ports { prefix = "TC"; /* [Normal] */ - port@0 { codec0_ep: endpoint { remote-endpoint = <&cpu0_ep>; }; }; + port@0 { reg = <0>; codec0_ep: endpoint { remote-endpoint = <&cpu0_ep>; }; }; /* [Multi-Codec] */ - port@1 { codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; - port@2 { codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; + port@1 { reg = <1>; codec1_ep: endpoint { remote-endpoint = <&mcodec1_ep>; }; }; + port@2 { reg = <2>; codec2_ep: endpoint { remote-endpoint = <&mcodec2_ep>; }; }; /* [DPCM]::BE */ port@3 { convert-rate = <44100>; - codec3_ep: endpoint { remote-endpoint = <&be00_ep>; }; + reg = <3>; codec3_ep: endpoint { remote-endpoint = <&be00_ep>; }; }; /* [DPCM-Multi]::BE */ - port@4 { codec4_ep: endpoint { remote-endpoint = <&mbe1_ep>; }; }; - port@5 { codec5_ep: endpoint { remote-endpoint = <&mbe2_ep>; }; }; + port@4 { reg = <4>; codec4_ep: endpoint { remote-endpoint = <&mbe1_ep>; }; }; + port@5 { reg = <5>; codec5_ep: endpoint { remote-endpoint = <&mbe2_ep>; }; }; /* [Codec2Codec] */ port@6 { bitclock-master; frame-master; - codec6_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; - port@7 { codec7_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; + reg = <6>; codec6_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; }; + port@7 { reg = <7>; codec7_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; }; /* [Codec2Codec-Multi] */ port@8 { bitclock-master; frame-master; - codec8_ep: endpoint { remote-endpoint = <&mc2c00_ep>; }; }; - port@9 { codec9_ep: endpoint { remote-endpoint = <&mc2c01_ep>; }; }; - port@10 { codec10_ep: endpoint { remote-endpoint = <&mc2c10_ep>; }; }; - port@11 { codec11_ep: endpoint { remote-endpoint = <&mc2c11_ep>; }; }; + reg = <8>; codec8_ep: endpoint { remote-endpoint = <&mc2c00_ep>; }; }; + port@9 { reg = <9>; codec9_ep: endpoint { remote-endpoint = <&mc2c01_ep>; }; }; + port@a { reg = <10>; codec10_ep: endpoint { remote-endpoint = <&mc2c10_ep>; }; }; + port@b { reg = <11>; codec11_ep: endpoint { remote-endpoint = <&mc2c11_ep>; }; }; /* [Semi-Multi] */ - port@12 { codec12_ep: endpoint { remote-endpoint = <&smcodec1_ep>; }; }; - port@13 { codec13_ep: endpoint { remote-endpoint = <&smcodec2_ep>; }; }; + port@c { reg = <12>; codec12_ep: endpoint { remote-endpoint = <&smcodec1_ep>; }; }; + port@d { reg = <13>; codec13_ep: endpoint { remote-endpoint = <&smcodec2_ep>; }; }; + }; }; }; -- 2.25.1

2 1

[PATCH] ASoC: Switch two more i2c drivers back to use .probe()
by Uwe Kleine-König 12 Jun '23

12 Jun '23

The previous conversion back to .probe() applied in commit 9abcd24002bf ("ASoC: Switch i2c drivers back to use .probe()") was created based on v6.3. Since then two more drivers were added which need to be convert back in the same way before eventually .probe_new() can be dropped from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> --- Hello, cs35l56 was already in v6.4-rc1, ssm3515 is only in next. This patch is based on 4ac690bbae02 ("ASoC: ssm3515: Add new amp driver") which is the oldest commit in next that has both drivers. Best regards Uwe sound/soc/codecs/cs35l56-i2c.c | 2 +- sound/soc/codecs/ssm3515.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs35l56-i2c.c b/sound/soc/codecs/cs35l56-i2c.c index 295caad26224..ed2a41943d97 100644 --- a/sound/soc/codecs/cs35l56-i2c.c +++ b/sound/soc/codecs/cs35l56-i2c.c @@ -68,7 +68,7 @@ static struct i2c_driver cs35l56_i2c_driver = { .pm = &cs35l56_pm_ops_i2c_spi, }, .id_table = cs35l56_id_i2c, - .probe_new = cs35l56_i2c_probe, + .probe = cs35l56_i2c_probe, .remove = cs35l56_i2c_remove, }; diff --git a/sound/soc/codecs/ssm3515.c b/sound/soc/codecs/ssm3515.c index 784e890031a4..008cb3eb5758 100644 --- a/sound/soc/codecs/ssm3515.c +++ b/sound/soc/codecs/ssm3515.c @@ -439,7 +439,7 @@ static struct i2c_driver ssm3515_i2c_driver = { .name = "ssm3515", .of_match_table = of_match_ptr(ssm3515_of_match), }, - .probe_new = ssm3515_i2c_probe, + .probe = ssm3515_i2c_probe, }; module_i2c_driver(ssm3515_i2c_driver); base-commit: 4ac690bbae02e26e36e133becd86babb657126ef -- 2.39.2

2 1

[PATCH] ASoC: dt-bindings: cirrus,cs35l45: drop unneeded quotes
by Krzysztof Kozlowski 12 Jun '23

12 Jun '23

Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- .../devicetree/bindings/sound/cirrus,cs35l45.yaml | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml index 2ab74f995685..4c9acb8d4c4c 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml @@ -62,7 +62,7 @@ patternProperties: GPIO pin direction. Valid only when 'gpio-ctrl' is 1 0 = Output 1 = Input - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 1 @@ -71,7 +71,7 @@ patternProperties: GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0 0 = Low 1 = High - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -80,7 +80,7 @@ patternProperties: GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0 0 = CMOS 1 = Open Drain - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -90,7 +90,7 @@ patternProperties: and 'gpio-dir' is 0 0 = Non-inverted, Active High 1 = Inverted, Active Low - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -114,7 +114,7 @@ patternProperties: 0 = High impedance input 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' 2-7 = Reserved - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 7 default: 0 -- 2.34.1

3 2

[PATCH v2 0/2] ASoC: mediatek: mt8173: Fix error paths
by Ricardo Ribalda Delgado 12 Jun '23

12 Jun '23

ASoC: mediatek: mt8173, presented a couple of error paths errors, lets fix them. Signed-off-by: Ricardo Ribalda Delgado <ribalda(a)chromium.org> --- Changes in v2: - Fix other error paths bugs, Thanks Dan! - Link to v1: https://lore.kernel.org/r/20230612-mt8173-fixup-v1-1-81f5c90316d1@chromium.… --- Ricardo Ribalda Delgado (2): ASoC: mediatek: mt8173: Fix snd_soc_component_initialize error path ASoC: mediatek: mt8173: Fix irq error path sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) --- base-commit: 858fd168a95c5b9669aac8db6c14a9aeab446375 change-id: 20230612-mt8173-fixup-bc602a96dbad Best regards, -- Ricardo Ribalda Delgado <ribalda(a)chromium.org>

3 5