- Alsa-devel - mailman.alsa-project.org

[PATCH v2 00/15] ASoC: add multi Component support
by Kuninori Morimoto 04 Aug '23

04 Aug '23

Hi Mark These are v2 of multi Component support. On below HW case, we would like to use it as "2 Cards", but unfortunately it is impossible in intuitive way, or possible but not intuitive way. In reality, it is handled as "1 big Card" today. +-- basic board --------+ |+--------+ | || CPU ch0| <--> CodecA | || ch1| <-+ | |+--------+ | | +-------------|---------+ +-- expansion board ----+ | | | | +-> CodecB| +-----------------------+ To handling it as intuitive "2 Cards", this patch-set adds multi Component support. To enable this patch-set, I included [01/15] patch into this patch-set which is posted but not yet accepted. v1 -> v2 - include [01/15] patch into this patch-set - add related member to To - add DT member to [14/15][15/15] Link: https://lore.kernel.org/all/87a6b6cofh.wl-kuninori.morimoto.gx@renesas.com/ Link: https://lore.kernel.org/r/87r0q5blta.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20230623-asoc-fix-meson-probe-v1-1-82b2c2ec5ca4@k… Kuninori Morimoto (15): ASoC: soc-core: protect dlc->of_node under mutex ASoC: soc-core.c: initialize dlc on snd_soc_get_dai_id() ASoC: soc-core.c: cleanup soc_dai_link_sanity_check() ASoC: soc-dai.c: add DAI get/match functions ASoC: soc-core.c: enable multi Component ASoC: soc-core.c: add snd_soc_get_dai_via_args() ASoC: soc-core.c: add snd_soc_dlc_use_cpu_as_platform() ASoC: soc-core.c: add snd_soc_copy_dai_args() ASoC: simple-card-utils.c: enable multi Component support ASoC: simple-card.c: enable multi Component support ASoC: rsnd: use DAI driver ID instead of DAI ID ASoC: rsnd: cleanup rsnd_dai_of_node() ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2 ASoC: dt-bindings: renesas,rsnd.yaml: add common port-def ASoC: dt-bindings: renesas,rsnd.yaml: enable multi ports for multi Component support .../bindings/sound/renesas,rsnd.yaml | 60 ++-- include/sound/simple_card_utils.h | 5 +- include/sound/soc-dai.h | 3 + include/sound/soc.h | 6 + sound/soc/generic/audio-graph-card.c | 2 +- sound/soc/generic/audio-graph-card2.c | 2 +- sound/soc/generic/simple-card-utils.c | 23 +- sound/soc/generic/simple-card.c | 20 +- sound/soc/sh/rcar/core.c | 146 +++++++--- sound/soc/sh/rcar/rsnd.h | 4 + sound/soc/soc-core.c | 273 +++++++++++++----- 11 files changed, 378 insertions(+), 166 deletions(-) -- 2.25.1

3 24

[PATCH] ASoC: SOF: mediatek: mt8186 modify dram type as non-cache
by Trevor Wu 04 Aug '23

04 Aug '23

To prevent incorrect access between the host and DSP sides, we need to modify DRAM as a non-cache memory type. Additionally, we can retrieve the size of shared DMA from the device tree. Signed-off-by: Trevor Wu <trevor.wu(a)mediatek.com> Reviewed-by: Yaochun Hung <yc.hung(a)mediatek.com> Reviewed-by: Kuan-Hsun Cheng <Allen-KH.Cheng(a)mediatek.com> --- sound/soc/sof/mediatek/mt8186/mt8186.c | 40 +++++++++++++++----------- 1 file changed, 23 insertions(+), 17 deletions(-) diff --git a/sound/soc/sof/mediatek/mt8186/mt8186.c b/sound/soc/sof/mediatek/mt8186/mt8186.c index 3e0ea0e109e2..f587edf9e0a7 100644 --- a/sound/soc/sof/mediatek/mt8186/mt8186.c +++ b/sound/soc/sof/mediatek/mt8186/mt8186.c @@ -111,6 +111,14 @@ static int platform_parse_resource(struct platform_device *pdev, void *data) dev_dbg(dev, "DMA %pR\n", &res); + adsp->pa_shared_dram = (phys_addr_t)res.start; + adsp->shared_size = resource_size(&res); + if (adsp->pa_shared_dram & DRAM_REMAP_MASK) { + dev_err(dev, "adsp shared dma memory(%#x) is not 4K-aligned\n", + (u32)adsp->pa_shared_dram); + return -EINVAL; + } + ret = of_reserved_mem_device_init(dev); if (ret) { dev_err(dev, "of_reserved_mem_device_init failed\n"); @@ -244,23 +252,18 @@ static int adsp_shared_base_ioremap(struct platform_device *pdev, void *data) { struct device *dev = &pdev->dev; struct mtk_adsp_chip_info *adsp = data; - u32 shared_size; /* remap shared-dram base to be non-cachable */ - shared_size = TOTAL_SIZE_SHARED_DRAM_FROM_TAIL; - adsp->pa_shared_dram = adsp->pa_dram + adsp->dramsize - shared_size; - if (adsp->va_dram) { - adsp->shared_dram = adsp->va_dram + DSP_DRAM_SIZE - shared_size; - } else { - adsp->shared_dram = devm_ioremap(dev, adsp->pa_shared_dram, - shared_size); - if (!adsp->shared_dram) { - dev_err(dev, "ioremap failed for shared DRAM\n"); - return -ENOMEM; - } + adsp->shared_dram = devm_ioremap(dev, adsp->pa_shared_dram, + adsp->shared_size); + if (!adsp->shared_dram) { + dev_err(dev, "failed to ioremap base %pa size %#x\n", + adsp->shared_dram, adsp->shared_size); + return -ENOMEM; } - dev_dbg(dev, "shared-dram vbase=%p, phy addr :%pa, size=%#x\n", - adsp->shared_dram, &adsp->pa_shared_dram, shared_size); + + dev_dbg(dev, "shared-dram vbase=%p, phy addr :%pa, size=%#x\n", + adsp->shared_dram, &adsp->pa_shared_dram, adsp->shared_size); return 0; } @@ -307,9 +310,12 @@ static int mt8186_dsp_probe(struct snd_sof_dev *sdev) return -ENOMEM; } - sdev->bar[SOF_FW_BLK_TYPE_SRAM] = devm_ioremap_wc(sdev->dev, - priv->adsp->pa_dram, - priv->adsp->dramsize); + priv->adsp->va_sram = sdev->bar[SOF_FW_BLK_TYPE_IRAM]; + + sdev->bar[SOF_FW_BLK_TYPE_SRAM] = devm_ioremap(sdev->dev, + priv->adsp->pa_dram, + priv->adsp->dramsize); + if (!sdev->bar[SOF_FW_BLK_TYPE_SRAM]) { dev_err(sdev->dev, "failed to ioremap base %pa size %#x\n", &priv->adsp->pa_dram, priv->adsp->dramsize); -- 2.18.0

4 3

[PATCH -next] ASoC: ti: davinci-evm: simplify the code with module_platform_driver
by Yang Yingliang 04 Aug '23

04 Aug '23

The init/exit() of driver only calls platform_driver_register/unregister, it can be simpilfied with module_platform_driver. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- sound/soc/ti/davinci-evm.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/sound/soc/ti/davinci-evm.c b/sound/soc/ti/davinci-evm.c index 983d69b951b0..544cb3da50eb 100644 --- a/sound/soc/ti/davinci-evm.c +++ b/sound/soc/ti/davinci-evm.c @@ -257,18 +257,7 @@ static struct platform_driver davinci_evm_driver = { }, }; -static int __init evm_init(void) -{ - return platform_driver_register(&davinci_evm_driver); -} - -static void __exit evm_exit(void) -{ - platform_driver_unregister(&davinci_evm_driver); -} - -module_init(evm_init); -module_exit(evm_exit); +module_platform_driver(davinci_evm_driver); MODULE_AUTHOR("Vladimir Barinov"); MODULE_DESCRIPTION("TI DAVINCI EVM ASoC driver"); -- 2.25.1

2 1

[PATCH v2 0/9] sound: Use -EPROBE_DEFER instead of i915 module loading.
by Maarten Lankhorst 04 Aug '23

04 Aug '23

Explicitly loading i915 becomes a problem when upstreaming the new intel driver for Tiger Lake and higher graphics (xe). By loading i915, it doesn't wait for driver load of xe, and will fail completely before it loads. -EPROBE_DEFER has to be returned before any device is created in probe(), otherwise the removal of the device will cause EPROBE_DEFER to try again in an infinite loop. The conversion is done in gradual steps. First I add an argument to snd_hdac_i915_init to allow for -EPROBE_DEFER so I can convert each driver separately. Then I convert each driver to move snd_hdac_i915_init out of the workqueue. Finally I drop the ability to choose modprobe behavior after the last user is converted. I suspect the avs and skylake drivers used snd_hdac_i915_init purely for the modprobe, but I don't have the hardware to test if it can be safely removed. It can still be done easily in a followup patch to simplify probing. --- New since first version: - snd_hda_core.gpu_bind is added as a mechanism to force gpu binding, for testing. snd_hda_core.gpu_bind=0 forces waiting for GPU bind to off, snd_hda_core.gpu_bind=1 forces waiting for gpu bind. Default setting depends on whether kernel booted with nomodeset. - Incorporated all feedback review. Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: Cezary Rojewski <cezary.rojewski(a)intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> Cc: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Cc: Bard Liao <yung-chuan.liao(a)linux.intel.com> Cc: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Cc: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Daniel Baluta <daniel.baluta(a)nxp.com> Cc: alsa-devel(a)alsa-project.org Cc: linux-kernel(a)vger.kernel.org Cc: sound-open-firmware(a)alsa-project.org Maarten Lankhorst (9): ALSA: hda/intel: Fix error handling in azx_probe() ALSA: hda/i915: Allow override of gpu binding. ALSA: hda/i915: Add an allow_modprobe argument to snd_hdac_i915_init ALSA: hda/i915: Allow xe as match for i915_component_master_match ASoC: Intel: avs: Move snd_hdac_i915_init to before probe_work. ASoC: Intel: Skylake: Move snd_hdac_i915_init to before probe_work. ALSA: hda/intel: Move snd_hdac_i915_init to before probe_work. ASoC: SOF: Intel: Remove deferred probe for SOF ALSA: hda/i915: Remove extra argument from snd_hdac_i915_init sound/hda/hdac_i915.c | 25 ++++++++------- sound/pci/hda/hda_intel.c | 60 ++++++++++++++++++----------------- sound/soc/intel/avs/core.c | 13 +++++--- sound/soc/intel/skylake/skl.c | 31 ++++++------------ sound/soc/sof/Kconfig | 19 ----------- sound/soc/sof/core.c | 38 ++-------------------- sound/soc/sof/intel/Kconfig | 1 - sound/soc/sof/intel/hda.c | 32 +++++++++++-------- sound/soc/sof/sof-pci-dev.c | 3 +- sound/soc/sof/sof-priv.h | 5 --- 10 files changed, 85 insertions(+), 142 deletions(-) -- 2.39.2

6 37

[PATCH] ALSA: usb-audio: Add support for Mythware XA001AU capture and playback interfaces.
by dengxiang 04 Aug '23

04 Aug '23

This patch adds a USB quirk for Mythware XA001AU USB interface. Signed-off-by: dengxiang <dengxiang(a)nfschina.com> --- sound/usb/quirks-table.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index efb4a3311cc5..5d72dc8441cb 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -4507,6 +4507,35 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +{ + /* Advanced modes of the Mythware XA001AU. + * For the standard mode, Mythware XA001AU has ID ffad:a001 + */ + USB_DEVICE_VENDOR_SPEC(0xffad, 0xa001), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Mythware", + .product_name = "XA001AU", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_IGNORE_INTERFACE, + }, + { + .ifnum = 1, + .type = QUIRK_AUDIO_STANDARD_INTERFACE, + }, + { + .ifnum = 2, + .type = QUIRK_AUDIO_STANDARD_INTERFACE, + }, + { + .ifnum = -1 + } + } + } +}, #undef USB_DEVICE_VENDOR_SPEC #undef USB_AUDIO_DEVICE -- 2.30.2

2 2

[GIT PULL] ASoC fixes for v6.5-rc4
by Mark Brown 04 Aug '23

04 Aug '23

The following changes since commit 5d0c230f1de8c7515b6567d9afba1f196fb4e2f4: Linux 6.5-rc4 (2023-07-30 13:23:47 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.5-rc4 for you to fetch changes up to f803ec63686dec863a33cad87218d7d99c4b5e92: ASoC: fsl: micfil: Use dual license micfil code (2023-08-03 14:54:06 +0100) ---------------------------------------------------------------- ASoC: Fix for v6.5 Not really a fix, but rather a licensing update for the fsl_micfil driver. ---------------------------------------------------------------- Daniel Baluta (1): ASoC: fsl: micfil: Use dual license micfil code sound/soc/fsl/fsl_micfil.c | 4 ++-- sound/soc/fsl/fsl_micfil.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)

2 1

[PATCH 0/5] ALSA/PCI: hda: add ARL-S support, config for MTL/LNL
by Pierre-Louis Bossart 04 Aug '23

04 Aug '23

Add a new PCI ID and i915 connectivity check for ArrowLake-S, and configuration updates for MTL/LNL. Kai Vehmanen (2): ALSA: hda: add HD Audio PCI ID for Intel Arrow Lake-S ALSA: hda/i915: extend connectivity check to cover Intel ARL Pierre-Louis Bossart (3): PCI: add ArrowLake-S PCI ID for Intel HDAudio subsystem. ALSA: hda: intel-dsp-cfg: use common include for MeteorLake ALSA: hda: intel-dsp-cfg: add LunarLake support include/linux/pci_ids.h | 1 + sound/hda/hdac_i915.c | 14 ++++++++++---- sound/hda/intel-dsp-config.c | 10 +++++++++- sound/pci/hda/hda_intel.c | 2 ++ 4 files changed, 22 insertions(+), 5 deletions(-) -- 2.39.2

4 12

[PATCH] ALSA: pcmtest: Move buffer iterator initialization to prepare callback
by Ivan Orlov 04 Aug '23

04 Aug '23

Trigger callback is not the best place for buffer iterator initialization, so move it out to the prepare callback, where it have to be. Minor enhancement: remove redundant definitions and blank line. Signed-off-by: Ivan Orlov <ivan.orlov0322(a)gmail.com> --- sound/drivers/pcmtest.c | 41 +++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 22 deletions(-) diff --git a/sound/drivers/pcmtest.c b/sound/drivers/pcmtest.c index 08e14b5eb772..7f170429eb8f 100644 --- a/sound/drivers/pcmtest.c +++ b/sound/drivers/pcmtest.c @@ -41,8 +41,6 @@ #include <linux/debugfs.h> #include <linux/delay.h> -#define DEVNAME "pcmtestd" -#define CARD_NAME "pcm-test-card" #define TIMER_PER_SEC 5 #define TIMER_INTERVAL (HZ / TIMER_PER_SEC) #define DELAY_JIFFIES HZ @@ -74,11 +72,11 @@ static u8 ioctl_reset_test; static struct dentry *driver_debug_dir; module_param(index, int, 0444); -MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard"); +MODULE_PARM_DESC(index, "Index value for pcmtest soundcard"); module_param(id, charp, 0444); -MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard"); +MODULE_PARM_DESC(id, "ID string for pcmtest soundcard"); module_param(enable, bool, 0444); -MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard."); +MODULE_PARM_DESC(enable, "Enable pcmtest soundcard."); module_param(fill_mode, short, 0600); MODULE_PARM_DESC(fill_mode, "Buffer fill mode: rand(0) or pattern(1)"); module_param(inject_delay, int, 0600); @@ -92,7 +90,6 @@ MODULE_PARM_DESC(inject_trigger_err, "Inject EINVAL error in the 'trigger' callb module_param(inject_open_err, bool, 0600); MODULE_PARM_DESC(inject_open_err, "Inject EBUSY error in the 'open' callback"); - struct pcmtst { struct snd_pcm *pcm; struct snd_card *card; @@ -405,25 +402,9 @@ static int snd_pcmtst_pcm_close(struct snd_pcm_substream *substream) static int snd_pcmtst_pcm_trigger(struct snd_pcm_substream *substream, int cmd) { - struct snd_pcm_runtime *runtime = substream->runtime; - struct pcmtst_buf_iter *v_iter = runtime->private_data; - if (inject_trigger_err) return -EINVAL; - v_iter->sample_bytes = runtime->sample_bits / 8; - v_iter->period_bytes = frames_to_bytes(runtime, runtime->period_size); - if (runtime->access == SNDRV_PCM_ACCESS_RW_NONINTERLEAVED || - runtime->access == SNDRV_PCM_ACCESS_MMAP_NONINTERLEAVED) { - v_iter->chan_block = runtime->dma_bytes / runtime->channels; - v_iter->interleaved = false; - } else { - v_iter->interleaved = true; - } - // We want to record RATE * ch_cnt samples per sec, it is rate * sample_bytes * ch_cnt bytes - v_iter->s_rw_ch = runtime->rate / TIMER_PER_SEC; - v_iter->b_rw = v_iter->s_rw_ch * v_iter->sample_bytes * runtime->channels; - return 0; } @@ -454,8 +435,24 @@ static void pcmtst_pdev_release(struct device *dev) static int snd_pcmtst_pcm_prepare(struct snd_pcm_substream *substream) { + struct snd_pcm_runtime *runtime = substream->runtime; + struct pcmtst_buf_iter *v_iter = runtime->private_data; + if (inject_prepare_err) return -EINVAL; + + v_iter->sample_bytes = samples_to_bytes(runtime, 1); + v_iter->period_bytes = snd_pcm_lib_period_bytes(substream); + v_iter->interleaved = true; + if (runtime->access == SNDRV_PCM_ACCESS_RW_NONINTERLEAVED || + runtime->access == SNDRV_PCM_ACCESS_MMAP_NONINTERLEAVED) { + v_iter->chan_block = snd_pcm_lib_buffer_bytes(substream) / runtime->channels; + v_iter->interleaved = false; + } + // We want to record RATE * ch_cnt samples per sec, it is rate * sample_bytes * ch_cnt bytes + v_iter->s_rw_ch = runtime->rate / TIMER_PER_SEC; + v_iter->b_rw = v_iter->s_rw_ch * v_iter->sample_bytes * runtime->channels; + return 0; } -- 2.34.1

2 2

[PATCH v1 1/2] ASoC: tas2783: Add source files for tas2783 soundwire driver
by Baojun.Xu 04 Aug '23

04 Aug '23

From: Baojun Xu <baojun.xu(a)ti.com> Add source file and header file for tas2783 driver. Update Kconfig and Makefile for tas2783 driver. Signed-off-by: Baojun Xu <baojun.xu(a)ti.com> --- Change in v1: - Add tas2783-sdw.c - Add tas2783.h - Update Makefile for tas2783 driver. - Update Kconfig for tas2783 driver. --- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 1166 ++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 178 +++++ 4 files changed, 1358 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index c2de4ee72183..318ad867030c 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -240,6 +240,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2781_COMLIB imply SND_SOC_TAS2781_FMWLIB imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1762,6 +1763,17 @@ config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C +config SND_SOC_TAS2783 + tristate "Texas Instruments TAS2781 speaker amplifier (sdw)" + depends on SOUNDWIRE + select REGMAP + select CRC8 + help + Enable support for Texas Instruments TAS2783 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + Note the TAS2783 driver implements a flexible and configurable + algo coff setting, for one, two, even multiple TAS2783 chips. + config SND_SOC_TAS571X tristate "Texas Instruments TAS571x power amplifiers" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index b48a9a323b84..3298dfa3b9d5 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -276,6 +276,7 @@ snd-soc-tas2770-objs := tas2770.o snd-soc-tas2781-comlib-objs := tas2781-comlib.o snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o snd-soc-tas2781-i2c-objs := tas2781-i2c.o +snd-soc-tas2783-objs := tas2783-sdw.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -648,6 +649,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000000..93b1e7a1f311 --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,1165 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier +// +// Copyright (C) 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2783 driver implements a flexible and configurable +// algo coefficient setting for single TAS2783 chips. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// Author: Kevin Lu <kevin-lu(a)ti.com> +// + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/pm_runtime.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <linux/init.h> +#include <linux/pm.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/crc8.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/firmware.h> +#include <linux/of_gpio.h> +#include <linux/interrupt.h> +#include <sound/soc.h> +#include <sound/sdw.h> +#include <sound/pcm_params.h> +#include <sound/tlv.h> +#include <sound/tas2781-tlv.h> + +#include "tas2783.h" + +static const unsigned int tas2783_calibration_reg[] = { + TAS2783_CALIBRATION_RE, + TAS2783_CALIBRATION_RE_LOW, + TAS2783_CALIBRATION_INV_RE, + TAS2783_CALIBRATION_POW, + TAS2783_CALIBRATION_TLIMIT, + 0, +}; + +static const struct reg_default tas2783_reg_defaults[] = { + // Default values for ROM mode. Activated. + { 0x8002, 0x1a}, + { 0x800e, 0x44}, + { 0x800f, 0x40}, + { 0x8097, 0xc8}, + { 0x80b5, 0x74}, + { 0x8099, 0x20}, + { 0xfe8d, 0x0d}, + { 0xfebe, 0x4a}, + { 0x8230, 0x00}, + { 0x8231, 0x00}, + { 0x8232, 0x00}, + { 0x8233, 0x01}, + { 0x8418, 0x00}, + { 0x8419, 0x00}, + { 0x841a, 0x00}, + { 0x841b, 0x00}, + { 0x8428, 0x40}, + { 0x8429, 0x00}, + { 0x842a, 0x00}, + { 0x842b, 0x00}, + { 0x8548, 0x00}, + { 0x8549, 0x00}, + { 0x854a, 0x00}, + { 0x854b, 0x00}, + { 0x8558, 0x40}, + { 0x8559, 0x00}, + { 0x855a, 0x00}, + { 0x855b, 0x00}, + { 0x800a, 0x3a}, + { 0x800e, 0x44}, + { 0x800f, 0x40}, + { 0x805c, 0xd9}, + { 0x8002, 0x00}, +}; + +static bool tas2783_readable_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8000 ... 0xc000: // Page 0 ~ 127. + case 0xfe80 ... 0xfeff: // Page 253. + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_UDMPU21, + TAS2783_SDCA_CTL_UDMPU_CLUSTER, 0): + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, CH_L): + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, CH_R): + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_PDE23, + TAS2783_SDCA_CTL_REQ_POWER_STATE, 0): + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_PDE22, + TAS2783_SDCA_CTL_REQ_POWER_STATE, 0): + return true; + default: + return false; + } +} + +static bool tas2783_volatile_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8001: + // Only reset register was volatiled. + return true; + default: + return false; + } +} + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .max_register = 0x41008000 + TASDEVICE_REG(0xa1, 0x60, 0x7f), + .reg_defaults = tas2783_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static int tas2783_sdw_read(void *context, const void *reg_buf, + const size_t reg_size, void *val_buf, size_t val_size) +{ + struct sdw_slave *peripheral = context; + u8 *buf8 = val_buf; + unsigned int reg, bytes; + int ret; + + reg = le32_to_cpu(*(const __le32 *)reg_buf); + reg += TAS2783_SDW_ADDR_OFFSET; + + while (val_size) { + /* to end of page */ + bytes = SDW_REG_NO_PAGE - (reg & SDW_REGADDR); + if (bytes > val_size) + bytes = val_size; + + ret = sdw_nread_no_pm(peripheral, reg, bytes, buf8); + if (ret != 0) { + dev_err(&peripheral->dev, "Read @%#x..%#x:%d\n", + reg, reg + bytes - 1, ret); + return ret; + } + + swab32_array((u32 *)buf8, bytes / 4); + val_size -= bytes; + reg += bytes; + buf8 += bytes; + } + + return 0; +} + +/* Convert for LSB or MSB. */ +static inline void tas2783_swab_copy( + void *dest, const void *src, size_t nbytes) +{ + u32 *dest32 = dest; + const u32 *src32 = src; + + for (; nbytes > 0; nbytes -= 4) + *dest32++ = swab32(*src32++); +} + +static int tas2783_sdw_gather_write(void *context, const void *reg_buf, + size_t reg_size, const void *val_buf, size_t val_size) +{ + struct sdw_slave *peripheral = context; + const u8 *src_be = val_buf; + u32 val_le_buf[64]; /* Define u32 so it is 32-bit aligned */ + unsigned int reg, bytes; + int ret; + + reg = le32_to_cpu(*(const __le32 *)reg_buf); + + while (val_size) { + /* to end of page */ + bytes = SDW_REG_NO_PAGE - (reg & SDW_REGADDR); + if (bytes > val_size) + bytes = val_size; + if (bytes > sizeof(val_le_buf)) + bytes = sizeof(val_le_buf); + + tas2783_swab_copy(val_le_buf, src_be, bytes); + + ret = sdw_nwrite_no_pm(peripheral, reg, bytes, + (u8 *)val_le_buf); + if (ret != 0) { + dev_err(&peripheral->dev, "Write @%#x..%#x:%d\n", + reg, reg + bytes - 1, ret); + return ret; + } + + val_size -= bytes; + reg += bytes; + src_be += bytes; + } + + return 0; +} + +static int tas2783_sdw_write( + void *context, const void *val_buf, size_t val_size) +{ + const u8 *src_buf = val_buf; + + /* First word of val_buf contains the destination address */ + return tas2783_sdw_gather_write(context, &src_buf[0], 4, + &src_buf[4], val_size - 4); +} + +static int tasdevice_clamp(int val, int max, unsigned int invert) +{ + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + return val; +} + +/* + * Registers are big-endian on I2C and SPI but little-endian on SoundWire. + * Exported firmware controls are big-endian on I2C/SPI but little-endian + * on SoundWire. + * Firmware files are always big-endian and are opaque blobs. + * Present a big-endian regmap and hide the endianness swap, + * so that the ALSA byte controls always have the same byte order, + * and firmware file blobs can be written verbatim. + */ +static const struct regmap_bus tas2783_regmap_bus_sdw = { + .read = tas2783_sdw_read, + .write = tas2783_sdw_write, + .gather_write = tas2783_sdw_gather_write, + .reg_format_endian_default = REGMAP_ENDIAN_LITTLE, + .val_format_endian_default = REGMAP_ENDIAN_BIG, +}; + +static int tas2783_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned int invert = mc->invert; + int max = mc->max; + int ret = 0; + + /* Read the primary device as the whole */ + ret = tasdevice_dev_read(tas_dev, &mc->reg, (unsigned int *)&val); + dev_dbg(tas_dev->dev, "%s, get digital vol %d from %x with %d\n", + __func__, val, mc->reg, ret); + if (ret) { + dev_err(tas_dev->dev, "%s, get digital vol error %x.\n", + __func__, ret); + goto out; + } + + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + +out: + return ret; +} + +static int tas2783_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val, ret = 0; + unsigned int invert = mc->invert; + int max = mc->max; + unsigned char value = 0; + + val = ucontrol->value.integer.value[0]; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + + value = (u8)val; + ret = sdw_nwrite_no_pm(tas_dev->sdw_slave, mc->reg, 1, &value); + if (ret != 0) { + dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n", + mc->reg, val, ret); + return ret; + } + dev_dbg(tas_dev->dev, "%s, Put digital vol %d into %x.\n", + __func__, val, mc->reg); + + return 1; +} + +static int tas2783_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val; + unsigned char mask = 0; + int max = mc->max; + int ret = 0; + unsigned int invert = mc->invert; + unsigned char value = 0; + + /* Read the primary device */ + ret = sdw_nread_no_pm(tas_dev->sdw_slave, mc->reg, 1, &value); + dev_dbg(tas_dev->dev, "%s, get AMP vol %d from %x with %d\n", + __func__, value, mc->reg, ret); + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = value; + val = (val & mask) >> mc->shift; + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + ucontrol->value.integer.value[0] = val; + + return ret; +} + +static int tas2783_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int val = 0, ret = 0, max = mc->max; + unsigned char mask = 0, value = 0; + unsigned int invert = mc->invert; + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = tasdevice_clamp(ucontrol->value.integer.value[0], max, + invert); + + ret = sdw_nread_no_pm(tas_dev->sdw_slave, mc->reg, 1, &value); + if (ret != 0) { + dev_err(tas_dev->dev, "Read @%x.%x:%d\n", + mc->reg, value, ret); + return ret; + } + value &= (~TAS2783_AMP_LEVEL_MASK); + value |= (val << mc->shift); + ret = sdw_nwrite_no_pm(tas_dev->sdw_slave, mc->reg, 1, &value); + if (ret != 0) { + dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n", + mc->reg, val, ret); + return ret; + } + dev_dbg(tas_dev->dev, "amp %x into 0x%08x by %lx shift %d.\n", + val, mc->reg, TAS2783_AMP_LEVEL_MASK, mc->shift); + + return ret; +} + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, 0, tas2783_amp_getvol, + tas2783_amp_putvol, amp_vol_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, tas2783_digital_getvol, + tas2783_digital_putvol, dvc_tlv), +}; + +static void tas2783_apply_calib( + struct tasdevice_priv *tas_priv, unsigned int *cali_data) +{ + unsigned int reg_address = 0, i = 0; + unsigned int *reg_start; + + if (!tas_priv->sdw_slave) + return; + if ((tas_priv->sdw_slave->id.unique_id < TAS2783_DEVICE_ID_START) + || (tas_priv->sdw_slave->id.unique_id > TAS2783_DEVICE_ID_END)) + return; + reg_start = cali_data+(tas_priv->sdw_slave->id.unique_id - + TAS2783_DEVICE_ID_START)*TAS2783_CALIBRATION_SIZE; + while (tas2783_calibration_reg[i] != 0) { + reg_address = tas2783_calibration_reg[i]; + tas2783_sdw_gather_write(tas_priv->sdw_slave, + &reg_address, 4, reg_start+i, 4); + } +} + +static int tas2783_calibration(struct tasdevice_priv *tas_priv) +{ + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + static efi_char16_t efi_name[] = L"CALI_DATA"; + struct tm *tm = &tas_priv->tm; + unsigned int attr, crc; + unsigned int *tmp_val; + efi_status_t status; + + tas_priv->cali_data.total_sz = 128; + /* Get real size of UEFI variable */ + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_priv->cali_data.total_sz, tas_priv->cali_data.data); + dev_dbg(tas_priv->dev, "cali get %lx bytes with result : %ld\n", + tas_priv->cali_data.total_sz, status); + if (status == EFI_BUFFER_TOO_SMALL) { + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_priv->cali_data.total_sz, + tas_priv->cali_data.data); + dev_dbg(tas_priv->dev, "cali get %lx bytes result:%ld\n", + tas_priv->cali_data.total_sz, status); + } + for (int i = 0; i < tas_priv->cali_data.total_sz; i += 4) { + dev_dbg(tas_priv->dev, "cali get %02x %02x %02x %02x", + tas_priv->cali_data.data[i], + tas_priv->cali_data.data[i+1], + tas_priv->cali_data.data[i+2], + tas_priv->cali_data.data[i+3]); + } + + tmp_val = (unsigned int *)tas_priv->cali_data.data; + + crc = crc32(~0, tas_priv->cali_data.data, 84) ^ ~0; + dev_dbg(tas_priv->dev, "cali crc 0x%08x PK tmp_val 0x%08x\n", + crc, tmp_val[21]); + + if (crc == tmp_val[21]) { + time64_to_tm(tmp_val[20], 0, tm); + dev_dbg(tas_priv->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n", + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + tas2783_apply_calib(tas_priv, tmp_val); + } else { + dev_dbg(tas_priv->dev, "CRC error!\n"); + tas_priv->cali_data.total_sz = 0; + } + + return 0; +} + +static void tasdevice_rca_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct MYSWFTFile *p; + unsigned char *buf = NULL, value_sdw; + int offset = 0, i = 0, num_files = 0, img_sz = 0; + int ret = 0; + + mutex_lock(&tas_dev->codec_lock); + + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, + "Failed to read %s, no side - effect on driver running\n", + tas_dev->rca_binaryname); + ret = -1; + goto out; + } + buf = (unsigned char *)fmw->data; + + img_sz = SMS_HTONL(buf[offset+3], buf[offset + 2], + buf[offset + 1], buf[offset]); + dev_dbg(tas_dev->dev, "Got %x:%lx.\n", img_sz, fmw->size); + offset += sizeof(img_sz); + if (img_sz != fmw->size) { + dev_err(tas_dev->dev, + "Size not match, %d %u", (int)fmw->size, img_sz); + ret = -1; + goto out; + } + + while ((offset < img_sz) && (num_files < MAX_NO_FILES)) { + p = (struct MYSWFTFile *)(buf + offset); + tas_dev->m_swftFile[num_files].m_vendor_id = + p->m_vendor_id; + tas_dev->m_swftFile[num_files].m_file_id = p->m_file_id; + tas_dev->m_swftFile[num_files].m_version = p->m_version; + tas_dev->m_swftFile[num_files].m_Length = p->m_Length; + tas_dev->m_swftFile[num_files].m_downloadAddr = + p->m_downloadAddr; + tas_dev->m_swftFile[num_files].m_startAdress = + ((char *)p) + sizeof(unsigned int)*5; + + ret = sdw_nwrite_no_pm(tas_dev->sdw_peripheral, + tas_dev->m_swftFile[num_files].m_downloadAddr, + tas_dev->m_swftFile[num_files].m_Length, + tas_dev->m_swftFile[num_files].m_startAdress); + dev_dbg(tas_dev->dev, "Write %x into %x result : %d\n", + tas_dev->m_swftFile[num_files].m_Length, + tas_dev->m_swftFile[num_files].m_downloadAddr, + ret); + + dev_dbg(tas_dev->dev, "Write %d :%x:%x:%x:%x:%x:%x.\n", + num_files, + tas_dev->m_swftFile[num_files].m_vendor_id, + tas_dev->m_swftFile[num_files].m_file_id, + tas_dev->m_swftFile[num_files].m_version, + tas_dev->m_swftFile[num_files].m_Length, + tas_dev->m_swftFile[num_files].m_downloadAddr, + tas_dev->m_swftFile[num_files].m_startAdress[0]); + + ret = sdw_nread_no_pm(tas_dev->sdw_peripheral, + tas_dev->m_swftFile[num_files].m_downloadAddr, + 1, &value_sdw); + dev_dbg(tas_dev->dev, "Got block %d :%x.\n", + num_files, value_sdw); + + offset += sizeof(unsigned int)*5 + p->m_Length; + num_files++; + } + + i = 0x50; + while (i < 0x56) { + ret = sdw_nread_no_pm(tas_dev->sdw_peripheral, i, 1, + &value_sdw); + dev_dbg(tas_dev->dev, "Got device id:%x\n", value_sdw); + i++; + } + tas2783_calibration(tas_dev); + +out: + mutex_unlock(&tas_dev->codec_lock); + if (fmw) + release_firmware(fmw); +} + +static void tasdevice_config_info_remove(void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + dev_dbg(tas_dev->dev, "%s was performed\n", __func__); +} + +static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *codec = + snd_soc_dapm_to_component(w->dapm); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + int state = 1; + + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + dev_dbg(tas_dev->dev, "dapm event : %x\n", event); + if (event == SND_SOC_DAPM_PRE_PMD) + state = 0; + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + return 0; +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT_E("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0, tasdevice_dapm_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_SPK("SPK", tasdevice_dapm_event), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC") +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"SPK", NULL, "ASI"}, + {"OUT", NULL, "SPK"}, + {"ASI OUT", NULL, "DMIC"} +}; + +static int tasdevice_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + int ret = 0; + + return ret; +} + +static int tasdevice_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct tasdevice_priv *tas_dev = + snd_soc_dai_get_drvdata(codec_dai); + + tas_dev->sysclk = freq; + + return 0; +} + +static int tasdevice_set_sdw_stream( + struct snd_soc_dai *dai, void *sdw_stream, int direction) +{ + struct sdw_stream_data *stream; + + if (!sdw_stream) + return 0; + + stream = kzalloc(sizeof(*stream), GFP_KERNEL); + if (!stream) + return -ENOMEM; + + stream->sdw_stream = sdw_stream; + + /* Use tx_mask or rx_mask to set dma_data */ + snd_soc_dai_dma_data_set(dai, direction, stream); + + return 0; +} + +static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sdw_stream_data *stream; + + stream = snd_soc_dai_get_dma_data(dai, substream); + snd_soc_dai_set_dma_data(dai, substream, NULL); + kfree(stream); +} + +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tasdevice = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_data *stream; + int retval; + + dev_dbg(dai->dev, "%s %s", __func__, dai->name); + stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!stream) + return -EINVAL; + + if (!tasdevice->sdw_slave) + return -EINVAL; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + retval = sdw_stream_add_slave(tasdevice->sdw_slave, + &stream_config, &port_config, 1, stream->sdw_stream); + if (retval) { + dev_err(dai->dev, "Unable to configure port\n"); + return retval; + } + + return 0; +} + +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tasdevice = + snd_soc_component_get_drvdata(component); + struct sdw_stream_data *stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!tasdevice->sdw_slave) + return -EINVAL; + + sdw_stream_remove_slave(tasdevice->sdw_slave, stream->sdw_stream); + return 0; +} + +static int tasdevice_mute(struct snd_soc_dai *dai, int mute, + int direction) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tasdevice = + snd_soc_component_get_drvdata(component); + int ret = 0; + unsigned char value_sdw = 0; + + dev_dbg(tasdevice->dev, "%s: mute %d, %d\n", + __func__, mute, direction); + if (mute == 0) {// Unmute. + // FU21 Unmute + value_sdw = 0; + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + SDW_SDCA_CTL(1, 1, 1, 0), 1, &value_sdw); + dev_dbg(tasdevice->dev, "Unmuted %lx %x\n", + SDW_SDCA_CTL(1, 1, 1, 0), ret); + value_sdw = 0; + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + 0x40400090, 1, &value_sdw); + dev_dbg(tasdevice->dev, "Unmuted %x\n", ret); + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + 0x40402090, 1, &value_sdw); + dev_dbg(tasdevice->dev, "Unmuted %x\n", ret); + + // FU23 Unmute + value_sdw = 0; + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + SDW_SDCA_CTL(1, 2, 1, 0), 1, &value_sdw); + dev_dbg(tasdevice->dev, "Unmuted %lx %x\n", + SDW_SDCA_CTL(1, 2, 1, 0), ret); + value_sdw = 0; + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + 0x40400108, 1, &value_sdw); + dev_dbg(tasdevice->dev, "Unmuted %x\n", ret); + value_sdw = 0; + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + 0x8002, 1, &value_sdw); + dev_dbg(tasdevice->dev, "Unmuted %x\n", ret); + } else { + // FU21 mute + value_sdw = 1; + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + SDW_SDCA_CTL(1, 1, 1, 0), 1, &value_sdw); + dev_dbg(tasdevice->dev, "muted %lx %x\n", + SDW_SDCA_CTL(1, 1, 1, 0), ret); + value_sdw = 1; + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + 0x40400090, 1, &value_sdw); + dev_dbg(tasdevice->dev, "muted %x\n", ret); + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + 0x40402090, 1, &value_sdw); + dev_dbg(tasdevice->dev, "muted %x\n", ret); + // FU23 mute + value_sdw = 1; + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + SDW_SDCA_CTL(1, 2, 1, 0), 1, &value_sdw); + dev_dbg(tasdevice->dev, "muted %lx %x\n", + SDW_SDCA_CTL(1, 2, 1, 0), ret); + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + 0x40400108, 1, &value_sdw); + dev_dbg(tasdevice->dev, "muted %x\n", ret); + value_sdw = 0x1a; + ret = sdw_nwrite_no_pm(tasdevice->sdw_peripheral, + 0x8002, 1, &value_sdw); + dev_dbg(tasdevice->dev, "muted %x\n", ret); + } + + if (!tasdevice->sdw_slave) + return -EINVAL; + + return 0; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .startup = tasdevice_startup, + .mute_stream = tasdevice_mute, + .hw_params = tasdevice_sdw_hw_params, + .set_sysclk = tasdevice_set_dai_sysclk, + .hw_free = tasdevice_sdw_pcm_hw_free, + .set_stream = tasdevice_set_sdw_stream, + .shutdown = tasdevice_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2783_codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 1, + .rates = TASDEVICE_RATES, + .formats = TASDEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static void tas2783_reset(struct tasdevice_priv *tas_dev) +{ + int ret = 0; + unsigned char value_sdw; + + value_sdw = TAS2873_REG_SWRESET_RESET; + ret = sdw_nwrite_no_pm(tas_dev->sdw_peripheral, + TAS2873_REG_SWRESET, 1, &value_sdw); + dev_dbg(tas_dev->dev, "%s TAS2783 was reseted.\n", __func__); + usleep_range(1000, 1050); +} + +static int tasdevice_codec_probe(struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + int ret = 0; + + dev_dbg(tas_dev->dev, "%s called for TAS2783 start.\n", + __func__); + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + + crc8_populate_msb(tas_dev->crc8_lkp_tbl, + TASDEVICE_CRC8_POLYNOMIAL); + tas_dev->codec = codec; + + scnprintf(tas_dev->rca_binaryname, 64, "MY_SWFT_x%01x.bin", + tas_dev->sdw_peripheral->id.unique_id); + + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL, + tas_dev, tasdevice_rca_ready); + dev_dbg(tas_dev->dev, + "%s: request_firmware %x open status: 0x%08x\n", + __func__, tas_dev->sdw_peripheral->id.unique_id, ret); + + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + tas2783_reset(tas_dev); + + dev_dbg(tas_dev->dev, "%s was called end.\n", __func__); + return ret; +} + +static void tasdevice_deinit(void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + + tasdevice_config_info_remove(tas_dev); +} + +static void tasdevice_codec_remove( + struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + tasdevice_deinit(tas_dev); + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_codec_probe, + .remove = tasdevice_codec_remove, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +int tasdevice_dev_read(struct tasdevice_priv *tas_dev, unsigned int *reg, + unsigned int *val) +{ + int ret = 0; + + mutex_lock(&tas_dev->dev_lock); + ret = tas2783_sdw_read(tas_dev->sdw_peripheral, + reg, 4, (void *)val, 4); + dev_dbg(tas_dev->dev, "%s, read %x from reg %x. Result is (%d)\n", + __func__, *val, *reg, ret); + mutex_unlock(&tas_dev->dev_lock); + return ret; +} + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret = 0; + + tas_dev->cur_prog = -1; + tas_dev->cur_conf = -1; + + dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__); + mutex_init(&tas_dev->dev_lock); + + dev_set_drvdata(tas_dev->dev, tas_dev); + + mutex_init(&tas_dev->codec_lock); + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:0x%08x\n", + __func__, ret); + } + dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__); + + return ret; +} + +static int tasdevice_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + int nval; + int i, j; + u32 bit; + unsigned long addr; + struct sdw_dpn_prop *dpn; + + prop->scp_int1_mask = + SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = 0x04; /* BITMAP: 00000100 */ + prop->sink_ports = 0x2; /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + j = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[j].num = bit; + dpn[j].type = SDW_DPN_FULL; + dpn[j].simple_ch_prep_sm = true; + dpn[j].ch_prep_timeout = 10; + j++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + dev_dbg(&slave->dev, "%s was performed.\n", __func__); + + return 0; +} + +static int tasdevice_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct tasdevice_priv *tasdevice = dev_get_drvdata(dev); + + if (tasdevice->hw_init) + return 0; + + if (tasdevice->first_hw_init) { + regcache_cache_only(tasdevice->regmap, false); + regcache_cache_bypass(tasdevice->regmap, true); + } else { + /* PM runtime is only enabled when + * a Slave reports as Attached + * set autosuspend parameters + */ + pm_runtime_set_autosuspend_delay(&slave->dev, 3000); + pm_runtime_use_autosuspend(&slave->dev); + + /* update count of parent 'active' children */ + pm_runtime_set_active(&slave->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(&slave->dev); + + pm_runtime_enable(&slave->dev); + } + + pm_runtime_get_noresume(&slave->dev); + + if (tasdevice->first_hw_init) { + regcache_cache_bypass(tasdevice->regmap, false); + regcache_mark_dirty(tasdevice->regmap); + } else + tasdevice->first_hw_init = true; + + /* Mark Slave initialization complete */ + tasdevice->hw_init = true; + + pm_runtime_mark_last_busy(&slave->dev); + pm_runtime_put_autosuspend(&slave->dev); + + dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); + return 0; +} + +static int tasdevice_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tasdevice_priv *tasdevice = dev_get_drvdata(&slave->dev); + + /* Update the status */ + tasdevice->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + tasdevice->hw_init = false; + + /* Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tasdevice->hw_init || tasdevice->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return tasdevice_io_init(&slave->dev, slave); +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static const struct sdw_slave_ops tasdevice_sdw_ops = { + .read_prop = tasdevice_read_prop, + .update_status = tasdevice_update_status, +}; + +static void tasdevice_remove(struct tasdevice_priv *tas_dev) +{ + snd_soc_unregister_component(tas_dev->dev); + if (gpio_is_valid(tas_dev->rst_gpio)) + gpio_free(tas_dev->rst_gpio); + + if (gpio_is_valid(tas_dev->irq_info.irq_gpio)) + gpio_free(tas_dev->irq_info.irq_gpio); + + mutex_destroy(&tas_dev->dev_lock); + mutex_destroy(&tas_dev->codec_lock); +} + +static int tasdevice_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct device *dev = &peripheral->dev; + struct tasdevice_priv *tas_dev; + int ret = 0; + + dev_dbg(dev, "%s was called for TAS2783.\n", __func__); + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) { + ret = -ENOMEM; + goto out; + } + tas_dev->dev = &peripheral->dev; + tas_dev->sdw_peripheral = peripheral; + tas_dev->chip_id = id->driver_data; + tas_dev->sdw_slave = peripheral; + tas_dev->hw_init = false; + tas_dev->first_hw_init = false; + + dev_dbg(dev, "%d chip id %x for TAS2783.\n", + peripheral->id.unique_id, tas_dev->chip_id); + + dev_set_drvdata(dev, tas_dev); + + tas_dev->regmap = devm_regmap_init(dev, &tas2783_regmap_bus_sdw, + peripheral, &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) { + ret = PTR_ERR(tas_dev->regmap); + dev_err(dev, "Failed devm_regmap_init: %d\n", ret); + goto out; + } + ret = tasdevice_init(tas_dev); + +out: + if (ret < 0 && tas_dev != NULL) + tasdevice_remove(tas_dev); + + dev_dbg(dev, "%s was called for TAS2783.\n", __func__); + return ret; + +} + +static int tasdevice_sdw_remove(struct sdw_slave *peripheral) +{ + struct tasdevice_priv *tas_dev = + dev_get_drvdata(&peripheral->dev); + + if (tas_dev) + tasdevice_remove(tas_dev); + + return 0; +} + +static const struct sdw_device_id tasdevice_sdw_id[] = { + SDW_SLAVE_ENTRY(0x0102, 0x0, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id); + +static struct sdw_driver tasdevice_sdw_driver = { + .driver = { + .name = "slave-tas2783", + }, + .probe = tasdevice_sdw_probe, + .remove = tasdevice_sdw_remove, + .ops = &tasdevice_sdw_ops, + .id_table = tasdevice_sdw_id, +}; + +module_sdw_driver(tasdevice_sdw_driver); + +MODULE_AUTHOR("Baojun Xu <baojun.xu(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000000..0fa5b3855b51 --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier + * + * Copyright (C) 2023 Texas Instruments Incorporated + * https://www.ti.com + * + * The TAS2783 driver implements a flexible and configurable + * algo coff setting for single TAS2783 chips. + * + * Author: Baojun Xu <baojun.xu(a)ti.com> + */ + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +#define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) +#define TAS2783_SDW_ADDR_OFFSET 0x8000 + +#define TASDEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +/* BOOK, PAGE Control Register */ +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 +\ + (page * 128) + reg) + +/*Software Reset */ +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01) +#define TAS2873_REG_SWRESET_RESET BIT(0) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1A) +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +/* Calibration data */ +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74) +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14) +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c) +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x0d, 0x3c) +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c) + +#define TAS2783_CALIBRATION_SIZE 5 // int data number. + +#define TAS2783_DEVICE_ID_START 0x08 // Unique id start +#define TAS2783_DEVICE_ID_END 0x0F // Unique id end + +/* TAS2783 SDCA Control - function number */ +#define FUNC_NUM_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ +#define TAS2783_SDCA_ENT_PDE23 0x0C +#define TAS2783_SDCA_ENT_PDE22 0x0B +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_UDMPU21 0x10 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define CH_L 1 +#define CH_R 2 + +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d + +#define MAX_NO_FILES 100 +#define MAX_CALIBRATION_DATA_SIZE 252 + +#define SMS_HTONL(a, b, c, d) ((((a)&0x000000FF)<<24) | \ + (((b)&0x000000FF)<<16) | \ + (((c)&0x000000FF)<<8) | \ + ((d)&0x000000FF)) + +enum channel { + top_left_Chn, + top_right_chn, + bottom_left_Chn, + bottom_right_chn, + max_chn, +}; + +struct tasdevice { + unsigned int dev_addr; + unsigned int err_code; + short cur_prog; + short cur_conf; + bool is_loading; + bool is_loaderr; + bool is_calibrated_data_loaded; + unsigned char cur_book; + struct tasdevice_fw *cali_data_fmw; +}; + +struct MYSWFTFile { + unsigned int m_vendor_id; + unsigned int m_file_id; + unsigned int m_version; + unsigned int m_Length; + unsigned int m_downloadAddr; + unsigned char *m_startAdress; +}; + +/* + * This item is used to store the generic i2c address of + * all the tas2781 devices for I2C broadcast during the multi-device + * writes, useless in mono case. + */ +struct global_addr { + unsigned char cur_book; + unsigned int dev_addr; + int ref_cnt; +}; + +struct calibration_data { + unsigned long total_sz; + unsigned char data[MAX_CALIBRATION_DATA_SIZE]; +}; + +struct tas_control { + struct snd_kcontrol_new *tasdevice_profile_controls; + int nr_controls; +}; + +struct tasdevice_irqinfo { + int irq_gpio; + int irq; +}; + +struct tasdevice_priv { + struct device *dev; + struct snd_soc_component *component; + struct sdw_slave *sdw_slave; + enum sdw_slave_status status; + struct sdw_bus_params params; + struct regmap *regmap; + struct mutex codec_lock; + struct mutex dev_lock; + int rst_gpio; + struct tasdevice tasdevice[max_chn]; + struct tasdevice_fw *fmw; + struct tasdevice_irqinfo irq_info; + struct tas_control tas_ctrl; + struct sdw_slave *sdw_peripheral; + struct global_addr glb_addr; + struct calibration_data cali_data; + struct tm tm; + int cur_prog; + int cur_conf; + unsigned int chip_id; + bool hw_init; + bool first_hw_init; + unsigned char *bq_params; + unsigned int magic_num; + unsigned char ndev; + unsigned char dev_name[32]; + unsigned char rca_binaryname[64]; + unsigned char coef_binaryname[64]; + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + + struct MYSWFTFile m_swftFile[MAX_NO_FILES]; + + void *codec; + unsigned int sysclk; + bool is_glb_calibrated_data_loaded; +}; + +struct sdw_stream_data { + struct sdw_stream_runtime *sdw_stream; +}; + +int tasdevice_dev_read(struct tasdevice_priv *tasdevice, + unsigned int *reg, unsigned int *value); + +#endif /*__TAS2783_H__ */ -- 2.34.1

4 4

[PATCH v3 0/6] ASoC: mediatek: Add support for MT7986 SoC
by Maso Huang 04 Aug '23

04 Aug '23

Changes in v3: - merge clk api to mt7986-afe-pcm.c, remove [2/7] in v2 - refine based on reviewer's suggestions [1/6] [2/6] - fix the comment format, move in clk api, and simplify based on reviewer's suggestions [3/6] - remove redundant prefix in dt-binding [6/6] Changes in v2: - v1 title: [PATCH 0/7] ASoC: mediatek: Add support for MT79xx SoC - add missing maintainers - rename mt79xx to mt7986 in all files - use clk bulk api in mt7986-afe-clk.c [2/7] - refine mt79xx-afe-pcm.c based on reviewer's suggestions [4/7] - refine dt-binding files based on reviewer's suggestions [6/7] [7/7] - transpose [3/7] and [4/7] in v1 to fix test build errors Maso Huang (6): ASoC: mediatek: mt7986: add common header ASoC: mediatek: mt7986: support etdm in platform driver ASoC: mediatek: mt7986: add platform driver ASoC: mediatek: mt7986: add machine driver with wm8960 ASoC: dt-bindings: mediatek,mt7986-wm8960: add mt7986-wm8960 document ASoC: dt-bindings: mediatek,mt7986-afe: add audio afe document .../bindings/sound/mediatek,mt7986-afe.yaml | 89 +++ .../sound/mediatek,mt7986-wm8960.yaml | 53 ++ sound/soc/mediatek/Kconfig | 20 + sound/soc/mediatek/Makefile | 1 + sound/soc/mediatek/mt7986/Makefile | 9 + sound/soc/mediatek/mt7986/mt7986-afe-common.h | 49 ++ sound/soc/mediatek/mt7986/mt7986-afe-pcm.c | 622 ++++++++++++++++++ sound/soc/mediatek/mt7986/mt7986-dai-etdm.c | 420 ++++++++++++ sound/soc/mediatek/mt7986/mt7986-reg.h | 206 ++++++ sound/soc/mediatek/mt7986/mt7986-wm8960.c | 184 ++++++ 10 files changed, 1653 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml create mode 100644 sound/soc/mediatek/mt7986/Makefile create mode 100644 sound/soc/mediatek/mt7986/mt7986-afe-common.h create mode 100644 sound/soc/mediatek/mt7986/mt7986-afe-pcm.c create mode 100644 sound/soc/mediatek/mt7986/mt7986-dai-etdm.c create mode 100644 sound/soc/mediatek/mt7986/mt7986-reg.h create mode 100644 sound/soc/mediatek/mt7986/mt7986-wm8960.c -- 2.18.0

5 16