- Alsa-devel - mailman.alsa-project.org

Re: RFC: usb: gadget: u_audio: Notifying gadget that host started playback/capture?
by Pavel Hofman 30 Oct '23

30 Oct '23

Hi, Dne 08. 09. 21 v 10:21 Pavel Hofman napsal(a): > Hi, > > The current audio gadget has no way to inform the gadget side that the > host side has started playback/capture and that gadget-side alsa > processes should be started. > > Playback/capture processes on the host side do not get stuck without the > gadget side consuming/producing data (OUT requests are ignored in > u_audio_iso_complete, IN ones send initial zeros in their req->buf). > > However, playback/capture processes on the gadget side get stuck without > the host side sending playback OUT packets or capture IN requests and > time out with error. If there was a way to inform the gadget side that > playback/capture has started on the host side, the gadget clients could > react accordingly. > I drafted a simple patch for u_audio.c which defines read-only boolean ctl elems "Capture Requested" and "Playback Requested". Their values are set/reset in methods u_audio_start_capture/playback and u_audio_stop_capture/playback, i.e. at changes of respective altsettings from 0 to 1 and back. Every ctl elem value change sends notification via snd_ctl_notify. The principle works OK for capture/playback start/stop on the host, as monitored by alsactl: pi@raspberrypi:~ $ alsactl monitor hw:UAC2Gadget node hw:UAC2Gadget, #4 (3,0,0,Capture Requested,0) VALUE node hw:UAC2Gadget, #4 (3,0,0,Capture Requested,0) VALUE node hw:UAC2Gadget, #3 (3,0,0,Playback Requested,0) VALUE node hw:UAC2Gadget, #3 (3,0,0,Playback Requested,0) VALUE However at enumeration the USB host switches both playback and capture altsettings repeatedly, generating "fake" events from the gadget side POW. The host even sends regular-sized EP-OUT packets filled with zeros during enumeration (tested on linux only for now). Please is there any way to "detect" the enumeration stage to mask out the "fake" playback/capture start/stop events? The attached patch does not apply cleanly to mainline u_audio.c because it's rebased on other patches not submitted yet but it's only a discussion inducer for now. Thanks a lot, Pavel.

2 6

[PATCH 0/2] ASoC: Intel: avs: Add support for rt5514 codec
by Amadeusz Sławiński 30 Oct '23

30 Oct '23

There are machines which use codec rt5514 as DMIC, add support for them. Amadeusz Sławiński (2): ASoC: Intel: avs: Add rt5514 machine board ASoC: Intel: avs: Add rt5514 machine board sound/soc/intel/avs/board_selection.c | 9 ++ sound/soc/intel/avs/boards/Kconfig | 10 ++ sound/soc/intel/avs/boards/Makefile | 2 + sound/soc/intel/avs/boards/rt5514.c | 187 ++++++++++++++++++++++++++ 4 files changed, 208 insertions(+) create mode 100644 sound/soc/intel/avs/boards/rt5514.c base-commit: 00236a89602f7b67016bd1d9bc63079f2c0f0a8d -- 2.34.1

3 8

Re: [PATCH] patch_realtek: Splitting the UX3402 into two separate models.
by Matthew Pisoni 30 Oct '23

30 Oct '23

Okay so how would I go about getting the following line added to the patch_realtek file? SND_PCI_QUIRK(0x1043, 0x1f62, "ASUS UX7602ZM", ALC245_FIXUP_CS35L41_SPI_2) It works on my machine I own that model I would just like it added as other models have been so I don't need to continue to patch the kernel module when it's already been effectively fixed for others. This thread looked like you all were discussing modifications to that file for this issue so I thought it might be a good place to start. Thank you! On Sun, Oct 29, 2023, 11:42 AM Арсений Князев <poseaydone(a)ya.ru> wrote: > The problem with this laptop is that for different models, different > values are required, so I had to put them in two different titles. > > I don't know if this is a problem with your device, but I think it would > be better to write a more precise model name. > > Best wishes, > Arseniy Knyazev > > > 28.10.2023, 07:37, "pizFunk" <mmpisoni(a)gmail.com>: > > > How can I get my model number added to the patch_realtek file? It > suffers the same issue as the UX3402 and the line that needs to be > added for my model laptop is: > > SND_PCI_QUIRK(0x1043, 0x1f62, "ASUS UX7602", > ALC245_FIXUP_CS35L41_SPI_2) > > Since I see you're being more specific here in splitting the model > numbers, technically my full model number is: "UX7602ZM". > > Again, when I patch this locally it works for my model number, but as > of yet only the other affected ASUS laptop modedls with my issue have > found their way into the kernel. > > Thanks! > > > > -- > >

1 0

[PATCH AUTOSEL 4.14 06/11] ASoC: rt5650: fix the wrong result of key button
by Sasha Levin 30 Oct '23

30 Oct '23

From: Shuming Fan <shumingf(a)realtek.com> [ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ] The RT5650 should enable a power setting for button detection to avoid the wrong result. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5645.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 01de25813c72b..822c42101c3f0 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3220,6 +3220,8 @@ int rt5645_set_jack_detect(struct snd_soc_codec *codec, RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ); regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL1, RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL); + regmap_update_bits(rt5645->regmap, RT5645_DEPOP_M1, + RT5645_HP_CB_MASK, RT5645_HP_CB_PU); } rt5645_irq(0, rt5645); -- 2.42.0

1 0

[PATCH AUTOSEL 4.19 06/12] ASoC: rt5650: fix the wrong result of key button
by Sasha Levin 30 Oct '23

30 Oct '23

From: Shuming Fan <shumingf(a)realtek.com> [ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ] The RT5650 should enable a power setting for button detection to avoid the wrong result. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5645.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index d34000182f679..a713e9649b56b 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3278,6 +3278,8 @@ int rt5645_set_jack_detect(struct snd_soc_component *component, RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ); regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL1, RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL); + regmap_update_bits(rt5645->regmap, RT5645_DEPOP_M1, + RT5645_HP_CB_MASK, RT5645_HP_CB_PU); } rt5645_irq(0, rt5645); -- 2.42.0

1 0

[PATCH AUTOSEL 5.4 07/13] ASoC: rt5650: fix the wrong result of key button
by Sasha Levin 30 Oct '23

30 Oct '23

From: Shuming Fan <shumingf(a)realtek.com> [ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ] The RT5650 should enable a power setting for button detection to avoid the wrong result. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5645.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index a66e93a3af745..9fda0e5548dc6 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3241,6 +3241,8 @@ int rt5645_set_jack_detect(struct snd_soc_component *component, RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ); regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL1, RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL); + regmap_update_bits(rt5645->regmap, RT5645_DEPOP_M1, + RT5645_HP_CB_MASK, RT5645_HP_CB_PU); } rt5645_irq(0, rt5645); -- 2.42.0

1 0

[PATCH AUTOSEL 5.10 08/16] ASoC: rt5650: fix the wrong result of key button
by Sasha Levin 30 Oct '23

30 Oct '23

From: Shuming Fan <shumingf(a)realtek.com> [ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ] The RT5650 should enable a power setting for button detection to avoid the wrong result. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5645.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index d1533e95a74f6..99d91bfb88122 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3241,6 +3241,8 @@ int rt5645_set_jack_detect(struct snd_soc_component *component, RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ); regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL1, RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL); + regmap_update_bits(rt5645->regmap, RT5645_DEPOP_M1, + RT5645_HP_CB_MASK, RT5645_HP_CB_PU); } rt5645_irq(0, rt5645); -- 2.42.0

1 0

[PATCH AUTOSEL 5.15 18/28] ASoC: rt5650: fix the wrong result of key button
by Sasha Levin 30 Oct '23

30 Oct '23

From: Shuming Fan <shumingf(a)realtek.com> [ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ] The RT5650 should enable a power setting for button detection to avoid the wrong result. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5645.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 8ea6d43335626..385f2cca939a0 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3251,6 +3251,8 @@ int rt5645_set_jack_detect(struct snd_soc_component *component, RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ); regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL1, RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL); + regmap_update_bits(rt5645->regmap, RT5645_DEPOP_M1, + RT5645_HP_CB_MASK, RT5645_HP_CB_PU); } rt5645_irq(0, rt5645); -- 2.42.0

1 0

[PATCH AUTOSEL 6.1 21/39] ASoC: codecs: tas2780: Fix log of failed reset via I2C.
by Sasha Levin 30 Oct '23

30 Oct '23

From: Roy Chateau <roy.chateau(a)mep-info.com> [ Upstream commit 4e9a429ae80657bdc502d3f5078e2073656ec5fd ] Correctly log failures of reset via I2C. Signed-off-by: Roy Chateau <roy.chateau(a)mep-info.com> Link: https://lore.kernel.org/r/20231013110239.473123-1-roy.chateau@mep-info.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/tas2780.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tas2780.c b/sound/soc/codecs/tas2780.c index afdf0c863aa10..a2d27410bbefa 100644 --- a/sound/soc/codecs/tas2780.c +++ b/sound/soc/codecs/tas2780.c @@ -39,7 +39,7 @@ static void tas2780_reset(struct tas2780_priv *tas2780) usleep_range(2000, 2050); } - snd_soc_component_write(tas2780->component, TAS2780_SW_RST, + ret = snd_soc_component_write(tas2780->component, TAS2780_SW_RST, TAS2780_RST); if (ret) dev_err(tas2780->dev, "%s:errCode:0x%x Reset error!\n", -- 2.42.0

1 0

[PATCH AUTOSEL 6.1 20/39] ASoC: rt5650: fix the wrong result of key button
by Sasha Levin 30 Oct '23

30 Oct '23

From: Shuming Fan <shumingf(a)realtek.com> [ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ] The RT5650 should enable a power setting for button detection to avoid the wrong result. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt5645.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 620ecbfa4a7a8..f86fc7cd104d4 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3251,6 +3251,8 @@ int rt5645_set_jack_detect(struct snd_soc_component *component, RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ); regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL1, RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL); + regmap_update_bits(rt5645->regmap, RT5645_DEPOP_M1, + RT5645_HP_CB_MASK, RT5645_HP_CB_PU); } rt5645_irq(0, rt5645); -- 2.42.0

1 0