- Alsa-devel - mailman.alsa-project.org

[PATCH v3 0/3] ASoC: codecs: lpass: add support for v2.5 rx macro
by Srinivas Kandagatla 13 Jun '24

13 Jun '24

This patchset adds support to reading codec version and also adds support for v2.5 codec version in rx macro. LPASS 2.5 and up versions have changes in some of the rx blocks which are required to get headset functional correctly. Tested this on SM8450, X13s and x1e80100 crd. This changes also fixes issue with sm8450, sm8550, sm8660 and x1e80100. @Neil Armstrong can you pl test it on sm8650 @Krzysztof Kozlowski can you pl test it on sm8550 Thanks, Srini Changes since v2: - added some locking around version variable. - split 2.5 changes to a new patch. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- Srinivas Kandagatla (3): ASoC: codecs: lpass-macro: add helpers to get codec version ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions ASoC: codec: lpass-rx-macro: add support for 2.5 codec version sound/soc/codecs/lpass-macro-common.c | 23 ++ sound/soc/codecs/lpass-macro-common.h | 35 +++ sound/soc/codecs/lpass-rx-macro.c | 555 ++++++++++++++++++++++++---------- sound/soc/codecs/lpass-va-macro.c | 29 ++ 4 files changed, 490 insertions(+), 152 deletions(-) --- base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0 change-id: 20240612-lpass-codec-v25-4e960abd661f Best regards, -- Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org>

4 9

[PATCH v2 0/2] ASoC: codecs: lpass: add support for v2.5 rx macro
by srinivas.kandagatla＠linaro.org 13 Jun '24

13 Jun '24

From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> This patchset adds support to reading codec version and also adds support for v2.5 codec version in rx macro. LPASS 2.5 and up versions have changes in some of the rx blocks which are required to get headset functional correctly. Tested this on SM8450, X13s and x1e80100 crd. This changes also fixes issue with sm8450, sm8550, sm8660 and x1e80100. @Neil Armstrong can you pl test it on sm8650 @Krzysztof Kozlowski can you pl test it on sm8550 Thanks, Srini Changes since v1: - renamed all 2_6 variables with 2.5 - expanded checks for versions from 2.5 till 2.8 Srinivas Kandagatla (2): ASoC: codecs: lpass-macro: add helpers to get codec version ASoC: codec: lpass-rx-macro: add suppor for 2.5 codec version sound/soc/codecs/lpass-macro-common.c | 14 + sound/soc/codecs/lpass-macro-common.h | 35 ++ sound/soc/codecs/lpass-rx-macro.c | 565 +++++++++++++++++++------- sound/soc/codecs/lpass-va-macro.c | 29 ++ 4 files changed, 488 insertions(+), 155 deletions(-) -- 2.21.0

4 9

[PATCH] ASoC: rt722-sdca-sdw: add debounce time for type detection
by Jack Yu 13 Jun '24

13 Jun '24

Add debounce time in headset type detection for better performance. Signed-off-by: Jack Yu <jack.yu(a)realtek.com> --- sound/soc/codecs/rt722-sdca-sdw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt722-sdca-sdw.c b/sound/soc/codecs/rt722-sdca-sdw.c index f73ee3bf90f5..87354bb1564e 100644 --- a/sound/soc/codecs/rt722-sdca-sdw.c +++ b/sound/soc/codecs/rt722-sdca-sdw.c @@ -352,7 +352,7 @@ static int rt722_sdca_interrupt_callback(struct sdw_slave *slave, if (status->sdca_cascade && !rt722->disable_irq) mod_delayed_work(system_power_efficient_wq, - &rt722->jack_detect_work, msecs_to_jiffies(30)); + &rt722->jack_detect_work, msecs_to_jiffies(280)); mutex_unlock(&rt722->disable_irq_lock); -- 2.34.1

2 1

[PATCH 0/4] ASoC: topology: Fix route memory corruption
by Amadeusz Sławiński 13 Jun '24

13 Jun '24

Originally reported here: https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-21… There is various level of failure there, first of all when topology loads routes, it points directly into FW file, but it may be freed after topology load. After fixing the above, when avs driver parses topology it should allocate its own memory, as target strings can be shorter than needed. Also clean up soc_tplg_dapm_graph_elems_load() a bit. Amadeusz Sławiński (4): ASoC: topology: Fix references to freed memory ASoC: Intel: avs: Fix route override ASoC: topology: Do not assign fields that are already set ASoC: topology: Clean up route loading sound/soc/intel/avs/topology.c | 19 ++++++++++++---- sound/soc/soc-topology.c | 41 ++++++++++++++++++---------------- 2 files changed, 37 insertions(+), 23 deletions(-) -- 2.34.1

4 10

[PATCH v2 0/5] ASoC/SOF/PCI/Intel: add PantherLake support
by Pierre-Louis Bossart 13 Jun '24

13 Jun '24

Add initial support for the PantherLake platform, and initial ACPI configurations. This patchset depends on the first patch of "[PATCH 0/3] ALSA/PCI: add PantherLake audio support" v2: changed order of patches to fix git bisect error reported by Intel kbuild bot https://lore.kernel.org/oe-kbuild-all/202406131144.L6gW0I47-lkp@intel.com/ Bard Liao (2): ASoC: Intel: soc-acpi-intel-ptl-match: add rt711-sdca table ASoC: Intel: soc-acpi-intel-ptl-match: Add rt722 support Fred Oh (1): ASoC: SOF: Intel: add PTL specific power control register Pierre-Louis Bossart (2): ASoC: Intel: soc-acpi: add PTL match tables ASoC: SOF: Intel: add initial support for PTL include/sound/soc-acpi-intel-match.h | 2 + sound/soc/intel/common/Makefile | 1 + .../intel/common/soc-acpi-intel-ptl-match.c | 121 ++++++++++++++++++ sound/soc/sof/intel/Kconfig | 17 +++ sound/soc/sof/intel/Makefile | 2 + sound/soc/sof/intel/hda-dsp.c | 1 + sound/soc/sof/intel/hda.h | 1 + sound/soc/sof/intel/lnl.c | 27 ++++ sound/soc/sof/intel/mtl.c | 16 ++- sound/soc/sof/intel/mtl.h | 2 + sound/soc/sof/intel/pci-ptl.c | 77 +++++++++++ sound/soc/sof/intel/shim.h | 1 + 12 files changed, 266 insertions(+), 2 deletions(-) create mode 100644 sound/soc/intel/common/soc-acpi-intel-ptl-match.c create mode 100644 sound/soc/sof/intel/pci-ptl.c -- 2.43.0

1 5

[PATCH v3 0/2] Fixes for McASP and dmaengine_pcm
by Jai Luthra 12 Jun '24

12 Jun '24

This series fixes two patches: 1. Fix the dmaengine API usage by calling dmaengine_synchronize() after dmaengine_terminate_async() when xrun events occur in application 2. Use the McASP AFIFO property from DT to refine the period size, instead of hardcoding minimum to 64 samples Signed-off-by: Jai Luthra <j-luthra(a)ti.com> --- Changes in v3: - Use sync_stop() hook instead of a prepare() hook for the DMA channel synchronization - Link to v2: https://lore.kernel.org/r/20240610-asoc_next-v2-0-b52aaf5d67c4@ti.com Changes in v2: - Fix compiler warning for prepare callback by marking it static - Pass numevt directly to hw_rule_min_periodsize() - Link to v1: https://lore.kernel.org/r/20240604-asoc_next-v1-0-e895c88e744d@ti.com --- Jai Luthra (2): ALSA: dmaengine: Synchronize dma channel after drop() ASoC: ti: davinci-mcasp: Set min period size using FIFO config include/sound/dmaengine_pcm.h | 1 + sound/core/pcm_dmaengine.c | 10 ++++++++++ sound/soc/soc-generic-dmaengine-pcm.c | 8 ++++++++ sound/soc/ti/davinci-mcasp.c | 9 +++++++-- 4 files changed, 26 insertions(+), 2 deletions(-) --- base-commit: a957267fa7e9159d3d2ee1421359ebf228570c68 change-id: 20240604-asoc_next-c063fcc190c6 Best regards, -- Jai Luthra <j-luthra(a)ti.com>

2 3

[PATCH v2] ASoC: ti: omap-hdmi: Fix too long driver name
by Primoz Fiser 12 Jun '24

12 Jun '24

Set driver name to "HDMI". This simplifies the code and gets rid of the following error messages: ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e' Signed-off-by: Primoz Fiser <primoz.fiser(a)norik.com> --- Changes in v2: - use "HDMI" instead of DRV_NAME (requested) sound/soc/ti/omap-hdmi.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/ti/omap-hdmi.c b/sound/soc/ti/omap-hdmi.c index 639bc83f4263..cf43ac19c4a6 100644 --- a/sound/soc/ti/omap-hdmi.c +++ b/sound/soc/ti/omap-hdmi.c @@ -354,11 +354,7 @@ static int omap_hdmi_audio_probe(struct platform_device *pdev) if (!card) return -ENOMEM; - card->name = devm_kasprintf(dev, GFP_KERNEL, - "HDMI %s", dev_name(ad->dssdev)); - if (!card->name) - return -ENOMEM; - + card->name = "HDMI"; card->owner = THIS_MODULE; card->dai_link = devm_kzalloc(dev, sizeof(*(card->dai_link)), GFP_KERNEL); -- 2.25.1

3 2

[PATCH] ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up
by Richard Fitzgerald 12 Jun '24

12 Jun '24

If the ASP1 DAI is hooked up by the machine driver the ASP TX mixer sources should be initialized to disconnected. The silicon default is for the mixer source registers to default to a collection of monitoring sources. The problem with this is that it causes the DAPM graph to initialize with the capture path connected to a valid source widget, even though nothing setup a path. When the ASP DAI is connected as a codec-to-codec link this will cause the other codec to power-up even though nothing is using it. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Fixes: dfd2ffb37399 ("ASoC: cs35l56: Prevent overwriting firmware ASP config") --- sound/soc/codecs/cs35l56-shared.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c index 8af89a263594..30497152e02a 100644 --- a/sound/soc/codecs/cs35l56-shared.c +++ b/sound/soc/codecs/cs35l56-shared.c @@ -215,6 +215,10 @@ static const struct reg_sequence cs35l56_asp1_defaults[] = { REG_SEQ0(CS35L56_ASP1_FRAME_CONTROL5, 0x00020100), REG_SEQ0(CS35L56_ASP1_DATA_CONTROL1, 0x00000018), REG_SEQ0(CS35L56_ASP1_DATA_CONTROL5, 0x00000018), + REG_SEQ0(CS35L56_ASP1TX1_INPUT, 0x00000000), + REG_SEQ0(CS35L56_ASP1TX2_INPUT, 0x00000000), + REG_SEQ0(CS35L56_ASP1TX3_INPUT, 0x00000000), + REG_SEQ0(CS35L56_ASP1TX4_INPUT, 0x00000000), }; /* -- 2.39.2

3 6

[RESEND PATCH v4] ASoc: tas2781: Enable RCA-based playback without DSP firmware download
by Shenghao Ding 12 Jun '24

12 Jun '24

<<< No Message Collected >>>

3 3

[RESEND PATCH v4] ASoc: tas2781: Enable RCA-based playback without DSP firmware download
by Shenghao Ding 12 Jun '24

12 Jun '24

In only RCA (Reconfigurable Architecture) binary case, no DSP program will be working inside tas2563/tas2781, that is dsp-bypass mode, do not support speaker protection, and audio acoustic algorithms in this mode. Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v4: - add a description of what the state machine looks like. - Remove TASDEVICE_DSP_FW_NONE because of unused. - Remove stray change. - Fix broken indentation. v3: - Add description on RCA is Reconfigurable Architecture. - Add the description on enabling - Reword the commit - Remove question mark in the comments. - Add spaces in comments. v2: - Correct comment. - Add Fixes. - Move header file to the first. v1: - Split out the different logical changes into different patches. - rename tasdevice_dsp_fw_state -> tasdevice_fw_state, the fw are not only DSP fw, but also RCA(Reconfigurable data, such as acoustic data and register setting, etc). - Add TASDEVICE_RCA_FW_OK in tasdevice_fw_state to identify the state that only RCA binary file has been download successfully, but DSP fw is not loaded or loading failure. - Add the this strategy into tasdevice_tuning_switch. - If one side of the if/else has a braces both should in tasdevice_tuning_switch. - Identify whehter both RCA and DSP have been loaded or only RCA has been loaded in tasdevice_fw_ready. - Add check fw load status in tasdevice_startup. - remove ret in tasdevice_startup to make the code neater. --- include/sound/tas2781-dsp.h | 11 ++++++++-- sound/soc/codecs/tas2781-fmwlib.c | 18 +++++++++++----- sound/soc/codecs/tas2781-i2c.c | 34 +++++++++++++++++++------------ 3 files changed, 43 insertions(+), 20 deletions(-) diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index 7fba7ea26a4b..3cda9da14f6d 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -117,10 +117,17 @@ struct tasdevice_fw { struct device *dev; }; -enum tasdevice_dsp_fw_state { - TASDEVICE_DSP_FW_NONE = 0, +enum tasdevice_fw_state { + /* Driver in startup mode, not load any firmware. */ TASDEVICE_DSP_FW_PENDING, + /* DSP firmware in the system, but parsing error. */ TASDEVICE_DSP_FW_FAIL, + /* + * Only RCA (Reconfigurable Architecture) firmware load + * successfully. + */ + TASDEVICE_RCA_FW_OK, + /* Both RCA and DSP firmware load successfully. */ TASDEVICE_DSP_FW_ALL_OK, }; diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 265a8ca25cbb..838d29fead96 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2324,14 +2324,21 @@ void tasdevice_tuning_switch(void *context, int state) struct tasdevice_fw *tas_fmw = tas_priv->fmw; int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); + /* + * Only RCA-based Playback can still work with no dsp program running + * inside the chip. + */ + switch (tas_priv->fw_state) { + case TASDEVICE_RCA_FW_OK: + case TASDEVICE_DSP_FW_ALL_OK: + break; + default: return; } if (state == 0) { - if (tas_priv->cur_prog < tas_fmw->nr_programs) { - /*dsp mode or tuning mode*/ + if (tas_fmw && tas_priv->cur_prog < tas_fmw->nr_programs) { + /* dsp mode or tuning mode */ profile_cfg_id = tas_priv->rcabin.profile_cfg_id; tasdevice_select_tuningprm_cfg(tas_priv, tas_priv->cur_prog, tas_priv->cur_conf, @@ -2340,9 +2347,10 @@ void tasdevice_tuning_switch(void *context, int state) tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_POWER_UP); - } else + } else { tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_SHUTDOWN); + } } EXPORT_SYMBOL_NS_GPL(tasdevice_tuning_switch, SND_SOC_TAS2781_FMWLIB); diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9350972dfefe..9c3c89cb36de 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -380,23 +380,32 @@ static void tasdevice_fw_ready(const struct firmware *fmw, mutex_lock(&tas_priv->codec_lock); ret = tasdevice_rca_parser(tas_priv, fmw); - if (ret) + if (ret) { + tasdevice_config_info_remove(tas_priv); goto out; + } tasdevice_create_control(tas_priv); tasdevice_dsp_remove(tas_priv); tasdevice_calbin_remove(tas_priv); - tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + tas_priv->fw_state = TASDEVICE_RCA_FW_OK; scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", tas_priv->dev_name); ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", tas_priv->coef_binaryname); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; goto out; } - tasdevice_dsp_create_ctrls(tas_priv); + + /* + * If no dsp-related kcontrol created, the dsp resource will be freed. + */ + ret = tasdevice_dsp_create_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dsp controls error\n"); + goto out; + } tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; @@ -417,9 +426,8 @@ static void tasdevice_fw_ready(const struct firmware *fmw, tasdevice_prmg_load(tas_priv, 0); tas_priv->cur_prog = 0; out: - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - /*If DSP FW fail, kcontrol won't be created */ - tasdevice_config_info_remove(tas_priv); + if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { + /* If DSP FW fail, DSP kcontrol won't be created. */ tasdevice_dsp_remove(tas_priv); } mutex_unlock(&tas_priv->codec_lock); @@ -466,14 +474,14 @@ static int tasdevice_startup(struct snd_pcm_substream *substream, { struct snd_soc_component *codec = dai->component; struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); - int ret = 0; - if (tas_priv->fw_state != TASDEVICE_DSP_FW_ALL_OK) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); - ret = -EINVAL; + switch (tas_priv->fw_state) { + case TASDEVICE_RCA_FW_OK: + case TASDEVICE_DSP_FW_ALL_OK: + return 0; + default: + return -EINVAL; } - - return ret; } static int tasdevice_hw_params(struct snd_pcm_substream *substream, -- 2.34.1

2 1