- Alsa-devel - mailman.alsa-project.org

[PATCH v3 0/3] ALSA: firewire-lib: restore process context workqueue to prevent deadlock
by Edmund Raile 30 Jul '24

30 Jul '24

This patchset serves to prevent an AB/BA deadlock: thread 0: * (lock A) acquire substream lock by snd_pcm_stream_lock_irq() in snd_pcm_status64() * (lock B) wait for tasklet to finish by calling tasklet_unlock_spin_wait() in tasklet_disable_in_atomic() in ohci_flush_iso_completions() of ohci.c thread 1: * (lock B) enter tasklet * (lock A) attempt to acquire substream lock, waiting for it to be released: snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed() in update_pcm_pointers() in process_ctx_payloads() in process_rx_packets() of amdtp-stream.c ? tasklet_unlock_spin_wait </NMI> <TASK> ohci_flush_iso_completions firewire_ohci amdtp_domain_stream_pcm_pointer snd_firewire_lib snd_pcm_update_hw_ptr0 snd_pcm snd_pcm_status64 snd_pcm ? native_queued_spin_lock_slowpath </NMI> <IRQ> _raw_spin_lock_irqsave snd_pcm_period_elapsed snd_pcm process_rx_packets snd_firewire_lib irq_target_callback snd_firewire_lib handle_it_packet firewire_ohci context_tasklet firewire_ohci The issue has been reported as a regression of kernel 5.14: Link: https://lore.kernel.org/regressions/kwryofzdmjvzkuw6j3clftsxmoolynljztxqwg7… ("[REGRESSION] ALSA: firewire-lib: snd_pcm_period_elapsed deadlock with Fireface 800") Commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event in process context") removed the process context workqueue from amdtp_domain_stream_pcm_pointer() and update_pcm_pointers() to remove its overhead. Commit b5b519965c4c ("ALSA: firewire-lib: obsolete workqueue for period update") belongs to the same patch series and removed the now-unused workqueue entirely. Though being observed on RME Fireface 800, this issue would affect all Firewire audio interfaces using ohci amdtp + pcm streaming. ALSA streaming, especially under intensive CPU load will reveal this issue the soonest due to issuing more hardIRQs, with time to occurrence ranging from 2 secons to 30 minutes after starting playback. to reproduce the issue: direct ALSA playback to the device: mpv --audio-device=alsa/sysdefault:CARD=Fireface800 Spor-Ignition.flac Time to occurrence: 2s to 30m Likelihood increased by: - high CPU load stress --cpu $(nproc) - switching between applications via workspaces tested with i915 in Xfce PulsaAudio / PipeWire conceal the issue as they run PCM substream without period wakeup mode, issuing less hardIRQs. Cc: stable(a)vger.kernel.org Backport note: Also applies to and fixes on (tested): 6.10.2, 6.9.12, 6.6.43, 6.1.102, 5.15.164 Edmund Raile (3): Revert "ALSA: firewire-lib: obsolete workqueue for period update" Revert "ALSA: firewire-lib: operate for period elapse event in process context" ALSA: firewire-lib: amdtp-stream work queue inline description sound/firewire/amdtp-stream.c | 38 ++++++++++++++++++++++------------- sound/firewire/amdtp-stream.h | 1 + 2 files changed, 25 insertions(+), 14 deletions(-) -- 2.45.2

2 4

[PATCH] ASoC: dt-bindings: qcom,apq8016-sbc-sndcard: move to separate binding
by Krzysztof Kozlowski 30 Jul '24

30 Jul '24

The APQ8016 SBC and MSM8916 QDSP6 sound cards are a bit different from others: they have additional IO muxing address space and pin control. Move them to separate schema, so the original qcom,sm8250.yaml will be easier to manage. New schema is going to grow for other platforms having more of IO muxing address spaces. Cc: Adam Skladowski <a39.skl(a)gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- .../sound/qcom,apq8016-sbc-sndcard.yaml | 205 ++++++++++++++++++ .../bindings/sound/qcom,sm8250.yaml | 137 ------------ 2 files changed, 205 insertions(+), 137 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml new file mode 100644 index 000000000000..6ad451549036 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,apq8016-sbc-sndcard.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APQ8016 and similar sound cards + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> + - Stephan Gerhold <stephan(a)gerhold.net> + +properties: + compatible: + enum: + - qcom,apq8016-sbc-sndcard + - qcom,msm8916-qdsp6-sndcard + + reg: + items: + - description: Microphone I/O mux register address + - description: Speaker I/O mux register address + + reg-names: + items: + - const: mic-iomux + - const: spkr-iomux + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. Valid names could be power supplies, + MicBias of codec and the jacks on the board. + + aux-devs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + List of phandles pointing to auxiliary devices, such + as amplifiers, to be added to the sound card. + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User visible long sound card name + + pin-switches: + description: List of widget names for which pin switches should be created. + $ref: /schemas/types.yaml#/definitions/string-array + + widgets: + description: User specified audio sound widgets. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + +patternProperties: + ".*-dai-link$": + description: + Each subnode represents a dai link. Subnodes of each dai links would be + cpu/codec dais. + + type: object + + properties: + link-name: + description: Indicates dai-link name and PCM stream name. + $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 + + cpu: + description: Holds subnode which indicates cpu dai. + type: object + additionalProperties: false + + properties: + sound-dai: + maxItems: 1 + + platform: + description: Holds subnode which indicates platform dai. + type: object + additionalProperties: false + + properties: + sound-dai: + maxItems: 1 + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + + properties: + sound-dai: + minItems: 1 + maxItems: 8 + + required: + - link-name + - cpu + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - model + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,lpass.h> + sound@7702000 { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + + model = "DB410c"; + audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + + quaternary-dai-link { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + }; + + - | + #include <dt-bindings/sound/qcom,q6afe.h> + #include <dt-bindings/sound/qcom,q6asm.h> + sound@7702000 { + compatible = "qcom,msm8916-qdsp6-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + + model = "msm8916"; + widgets = + "Speaker", "Speaker", + "Headphone", "Headphones"; + pin-switches = "Speaker"; + audio-routing = + "Speaker", "Speaker Amp OUT", + "Speaker Amp IN", "HPH_R", + "Headphones", "HPH_L", + "Headphones", "HPH_R", + "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS Internal3"; + aux-devs = <&speaker_amp>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + primary-dai-link { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index c9076dcd44c1..1d3acdc0c733 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -27,9 +27,7 @@ properties: - qcom,sm8650-sndcard - const: qcom,sm8450-sndcard - enum: - - qcom,apq8016-sbc-sndcard - qcom,apq8096-sndcard - - qcom,msm8916-qdsp6-sndcard - qcom,qcm6490-idp-sndcard - qcom,qcs6490-rb3gen2-sndcard - qcom,qrb5165-rb5-sndcard @@ -58,18 +56,6 @@ properties: $ref: /schemas/types.yaml#/definitions/string description: User visible long sound card name - pin-switches: - description: List of widget names for which pin switches should be created. - $ref: /schemas/types.yaml#/definitions/string-array - - widgets: - description: User specified audio sound widgets. - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - - # Only valid for some compatibles (see allOf if below) - reg: true - reg-names: true - patternProperties: ".*-dai-link$": description: @@ -122,34 +108,6 @@ required: - compatible - model -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,apq8016-sbc-sndcard - - qcom,msm8916-qdsp6-sndcard - then: - properties: - reg: - items: - - description: Microphone I/O mux register address - - description: Speaker I/O mux register address - reg-names: - items: - - const: mic-iomux - - const: spkr-iomux - required: - - compatible - - model - - reg - - reg-names - else: - properties: - reg: false - reg-names: false - additionalProperties: false examples: @@ -231,98 +189,3 @@ examples: }; }; }; - - - | - #include <dt-bindings/sound/qcom,lpass.h> - sound@7702000 { - compatible = "qcom,apq8016-sbc-sndcard"; - reg = <0x07702000 0x4>, <0x07702004 0x4>; - reg-names = "mic-iomux", "spkr-iomux"; - - model = "DB410c"; - audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; - - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; - pinctrl-names = "default", "sleep"; - - quaternary-dai-link { - link-name = "ADV7533"; - cpu { - sound-dai = <&lpass MI2S_QUATERNARY>; - }; - codec { - sound-dai = <&adv_bridge 0>; - }; - }; - - primary-dai-link { - link-name = "WCD"; - cpu { - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - - tertiary-dai-link { - link-name = "WCD-Capture"; - cpu { - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; - }; - }; - }; - - - | - #include <dt-bindings/sound/qcom,q6afe.h> - #include <dt-bindings/sound/qcom,q6asm.h> - sound@7702000 { - compatible = "qcom,msm8916-qdsp6-sndcard"; - reg = <0x07702000 0x4>, <0x07702004 0x4>; - reg-names = "mic-iomux", "spkr-iomux"; - - model = "msm8916"; - widgets = - "Speaker", "Speaker", - "Headphone", "Headphones"; - pin-switches = "Speaker"; - audio-routing = - "Speaker", "Speaker Amp OUT", - "Speaker Amp IN", "HPH_R", - "Headphones", "HPH_L", - "Headphones", "HPH_R", - "AMIC1", "MIC BIAS Internal1", - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS Internal3"; - aux-devs = <&speaker_amp>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cdc_pdm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus>; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - primary-dai-link { - link-name = "Primary MI2S"; - cpu { - sound-dai = <&q6afedai PRIMARY_MI2S_RX>; - }; - platform { - sound-dai = <&q6routing>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - }; -- 2.43.0

6 6

[PATCH 0/6] ASoC: codecs: wcd93xx/wsa88xx: Correct Soundwire ports mask
by Krzysztof Kozlowski 29 Jul '24

29 Jul '24

Hi, Incorrect mask of Soundwire ports - one bit too long/big - was passed. Theoretically, too wide mask could cause an out of bounds read in sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy driver, e.g. adding incorrect number of ports via sdw_stream_add_slave(). Not adding Cc-stable because I don't think the issue can lead to real out-of-bounds read. Best regards, Krzysztof --- Krzysztof Kozlowski (6): ASoC: codecs: wcd937x-sdw: Correct Soundwire ports mask ASoC: codecs: wcd938x-sdw: Correct Soundwire ports mask ASoC: codecs: wcd939x-sdw: Correct Soundwire ports mask ASoC: codecs: wsa881x: Correct Soundwire ports mask ASoC: codecs: wsa883x: Correct Soundwire ports mask ASoC: codecs: wsa884x: Correct Soundwire ports mask sound/soc/codecs/wcd937x-sdw.c | 4 ++-- sound/soc/codecs/wcd938x-sdw.c | 4 ++-- sound/soc/codecs/wcd939x-sdw.c | 4 ++-- sound/soc/codecs/wsa881x.c | 2 +- sound/soc/codecs/wsa883x.c | 2 +- sound/soc/codecs/wsa884x.c | 2 +- 6 files changed, 9 insertions(+), 9 deletions(-) --- base-commit: 864b1099d16fc7e332c3ad7823058c65f890486c change-id: 20240726-asoc-wcd-wsa-swr-ports-genmask-868239f9682f Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

3 8

[PATCH] ALSA: hda: cs35l56: Stop creating ALSA controls for firmware coefficients
by Simon Trimmer 29 Jul '24

29 Jul '24

A number of laptops have gone to market with old firmware versions that export controls that have since been hidden, but we can't just install a newer firmware because the firmware for each product is customized and qualified by the OEM. The issue is that alsactl save and restore has no idea what controls are good to persist which can lead to misconfiguration. As the ALSA controls for the firmware coefficients are not used in normal operation they can all be hidden, but add a kernel parameter so that they can be re-enabled for debugging. Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Signed-off-by: Simon Trimmer <simont(a)opensource.cirrus.com> --- sound/pci/hda/cs35l56_hda.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c index 96d3f13c5abf..1494383b22c9 100644 --- a/sound/pci/hda/cs35l56_hda.c +++ b/sound/pci/hda/cs35l56_hda.c @@ -23,6 +23,10 @@ #include "hda_cs_dsp_ctl.h" #include "hda_generic.h" +static bool expose_dsp_controls; +module_param(expose_dsp_controls, bool, 0444); +MODULE_PARM_DESC(expose_dsp_controls, "Expose firmware controls as ALSA controls 0=no (default), 1=yes"); + /* * The cs35l56_hda_dai_config[] reg sequence configures the device as * ASP1_BCLK_FREQ = 3.072 MHz @@ -758,6 +762,9 @@ static int cs35l56_hda_bind(struct device *dev, struct device *master, void *mas cs35l56_hda_create_controls(cs35l56); + if (expose_dsp_controls) + cs35l56_hda_add_dsp_controls(cs35l56); + #if IS_ENABLED(CONFIG_SND_DEBUG) cs35l56->debugfs_root = debugfs_create_dir(dev_name(cs35l56->base.dev), sound_debugfs_root); cs_dsp_init_debugfs(&cs35l56->cs_dsp, cs35l56->debugfs_root); -- 2.43.0

2 2

ASUS RoG Strix Z790-F: SPDIF (PCM) has wrong channels | how to get passthrough working?
by GitHub issues - opened 29 Jul '24

29 Jul '24

alsa-project/alsa-ucm-conf issue #434 was opened from Nightwing0815: Hi there, finally, [after a long journey,](https://github.com/alsa-project/alsa-ucm-conf/issues/350) yesterday I did an update from linuxmint to newest version 22, based on ubuntu 24.04 (I'll attach alsa-info and a system info). Now it's no big problem any more, to get SPDIF working: I just selected the right device and muted all others in alsamixer, except the pcm signal. But hey, there's a new problem: With a speaker-test -c6, I'm not able to hear my rear channels and the lfe channel, where they should be. Rear coming on front speakers... So, what do I have to do? Further, I'm asking for help to configure a pcm signal passthru for dts and (e)ac3 soundfiles. My teufel receiver recognices only a 5.1 stereo source, not an DD5.1 or DTS signal... [alsa-info.txt](https://github.com/user-attachments/files/16417700/alsa-info… [sysinfo.txt](https://github.com/user-attachments/files/16417724/sysinfo.txt) Thanks in advance for getting this problems solved, ToM Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/434 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH 0/7] ASoC: codecs: wsa88xx and wcd93xx: Soundwire port non-functional cleanup
by Krzysztof Kozlowski 29 Jul '24

29 Jul '24

Hi, Few cleanups to make the code more robust or readable. No functional impact (compiled objects stay the same). Best regards, Krzysztof --- Krzysztof Kozlowski (7): ASoC: codecs: wsa881x: Use designator array initializers for Soundwire ports ASoC: codecs: wsa883x: Use designator array initializers for Soundwire ports ASoC: codecs: wsa884x: Use designator array initializers for Soundwire ports ASoC: codecs: wcd938x: Drop unused defines and enums ASoC: codecs: wcd937x: Move max port number defines to enum ASoC: codecs: wcd938x: Move max port number defines to enum ASoC: codecs: wcd939x: Move max port number defines to enum sound/soc/codecs/wcd937x.h | 34 +++++++++++++++++----------------- sound/soc/codecs/wcd938x.c | 18 ------------------ sound/soc/codecs/wcd938x.h | 4 ++-- sound/soc/codecs/wcd939x.h | 6 +++--- sound/soc/codecs/wsa881x.c | 42 ++++++++++++++++++++++-------------------- sound/soc/codecs/wsa883x.c | 42 ++++++++++++++++++++++-------------------- sound/soc/codecs/wsa884x.c | 34 ++++++++++++++++++++++------------ 7 files changed, 88 insertions(+), 92 deletions(-) --- base-commit: 66df68b9536e7465aec703733ea91ca39b787ed8 change-id: 20240725-asoc-wsa88xx-port-arrays-c58c96cd888e Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

3 15

[PATCH v2] ASoC: sti: add missing probe entry for player and reader
by Jerome Audu 29 Jul '24

29 Jul '24

This patch addresses a regression in the ASoC STI drivers that was introduced in Linux version 6.6.y. The issue originated from a series of patches (see https://lore.kernel.org/all/87wmy5b0wt.wl-kuninori.morimoto.gx@renesas.com/) that unintentionally omitted necessary probe functions for the player and reader components. Probe function in `sound/soc/sti/sti_uniperif.c:415` is being replaced by another probe function located at `sound/soc/sti/sti_uniperif.c:453`, which should instead be derived from the player and reader components. This patch correctly reinserts the missing probe entries, restoring the intended functionality. Fixes: 9f625f5e6cf9 ("ASoC: sti: merge DAI call back functions into ops") Signed-off-by: Jerome Audu <jau(a)free.fr> --- Changes in v2: - Update changelog - Link to v1: https://lore.kernel.org/r/20240721-sti-audio-fix-v1-1-a8b1ecf61cb4@free.fr --- sound/soc/sti/sti_uniperif.c | 2 +- sound/soc/sti/uniperif.h | 1 + sound/soc/sti/uniperif_player.c | 1 + sound/soc/sti/uniperif_reader.c | 1 + 4 files changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/sti/sti_uniperif.c b/sound/soc/sti/sti_uniperif.c index ba824f14a39c..a7956e5a4ee5 100644 --- a/sound/soc/sti/sti_uniperif.c +++ b/sound/soc/sti/sti_uniperif.c @@ -352,7 +352,7 @@ static int sti_uniperiph_resume(struct snd_soc_component *component) return ret; } -static int sti_uniperiph_dai_probe(struct snd_soc_dai *dai) +int sti_uniperiph_dai_probe(struct snd_soc_dai *dai) { struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); struct sti_uniperiph_dai *dai_data = &priv->dai_data; diff --git a/sound/soc/sti/uniperif.h b/sound/soc/sti/uniperif.h index 2a5de328501c..74e51f0ff85c 100644 --- a/sound/soc/sti/uniperif.h +++ b/sound/soc/sti/uniperif.h @@ -1380,6 +1380,7 @@ int uni_reader_init(struct platform_device *pdev, struct uniperif *reader); /* common */ +int sti_uniperiph_dai_probe(struct snd_soc_dai *dai); int sti_uniperiph_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt); diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c index dd9013c47664..6d1ce030963c 100644 --- a/sound/soc/sti/uniperif_player.c +++ b/sound/soc/sti/uniperif_player.c @@ -1038,6 +1038,7 @@ static const struct snd_soc_dai_ops uni_player_dai_ops = { .startup = uni_player_startup, .shutdown = uni_player_shutdown, .prepare = uni_player_prepare, + .probe = sti_uniperiph_dai_probe, .trigger = uni_player_trigger, .hw_params = sti_uniperiph_dai_hw_params, .set_fmt = sti_uniperiph_dai_set_fmt, diff --git a/sound/soc/sti/uniperif_reader.c b/sound/soc/sti/uniperif_reader.c index 065c5f0d1f5f..05ea2b794eb9 100644 --- a/sound/soc/sti/uniperif_reader.c +++ b/sound/soc/sti/uniperif_reader.c @@ -401,6 +401,7 @@ static const struct snd_soc_dai_ops uni_reader_dai_ops = { .startup = uni_reader_startup, .shutdown = uni_reader_shutdown, .prepare = uni_reader_prepare, + .probe = sti_uniperiph_dai_probe, .trigger = uni_reader_trigger, .hw_params = sti_uniperiph_dai_hw_params, .set_fmt = sti_uniperiph_dai_set_fmt, --- base-commit: 0c3836482481200ead7b416ca80c68a29cfdaabd change-id: 20240721-sti-audio-fix-1374fffb24e7 Best regards, -- Jerome Audu <jau(a)free.fr>

2 1

[RESEND] ASoC: codecs: ES8326: suspend issue
by Zhang Yi 29 Jul '24

29 Jul '24

We find that we need to disable micbias for the codec to enter suspend So We modify the trigger conditions for enable_micbias and disable_micbias Signed-off-by: Zhang Yi <zhangyi(a)everest-semi.com> --- sound/soc/codecs/es8326.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index b246694ebb4f..60877116c0ef 100755 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -805,6 +805,7 @@ static void es8326_jack_button_handler(struct work_struct *work) SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2); button_to_report = 0; } + es8326_disable_micbias(es8326->component); } mutex_unlock(&es8326->lock); } @@ -878,7 +879,6 @@ static void es8326_jack_detect_handler(struct work_struct *work) regmap_write(es8326->regmap, ES8326_INT_SOURCE, 0x00); regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x03, 0x01); regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x10, 0x00); - es8326_enable_micbias(es8326->component); usleep_range(50000, 70000); regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x03, 0x00); regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x10, 0x10); @@ -897,6 +897,7 @@ static void es8326_jack_detect_handler(struct work_struct *work) dev_dbg(comp->dev, "button pressed\n"); regmap_write(es8326->regmap, ES8326_INT_SOURCE, (ES8326_INT_SRC_PIN9 | ES8326_INT_SRC_BUTTON)); + es8326_enable_micbias(es8326->component); queue_delayed_work(system_wq, &es8326->button_press_work, 10); goto exit; } @@ -1067,6 +1068,7 @@ static void es8326_init(struct snd_soc_component *component) regmap_write(es8326->regmap, ES8326_ADC_MUTE, 0x0f); regmap_write(es8326->regmap, ES8326_CLK_DIV_LRCK, 0xff); + es8326_disable_micbias(es8326->component); msleep(200); regmap_write(es8326->regmap, ES8326_INT_SOURCE, ES8326_INT_SRC_PIN9); -- 2.17.1

2 1

[PATCH] ASoC: codecs: lpass-wsa-macro: Do not hard-code dai in VI mixer
by Krzysztof Kozlowski 29 Jul '24

29 Jul '24

The wsa_macro_vi_feed_mixer_put() callback for setting VI feedback mixer value could be used for different DAIs (planned in the future CPS DAI), so make the code a bit more generic by using DAI ID from widget->shift, instead of hard-coding it. The get() callback already follows such convention. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/codecs/lpass-wsa-macro.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c index 8351f0974e6a..4158657914fb 100644 --- a/sound/soc/codecs/lpass-wsa-macro.c +++ b/sound/soc/codecs/lpass-wsa-macro.c @@ -2296,36 +2296,37 @@ static int wsa_macro_vi_feed_mixer_put(struct snd_kcontrol *kcontrol, struct wsa_macro *wsa = snd_soc_component_get_drvdata(component); u32 enable = ucontrol->value.integer.value[0]; u32 spk_tx_id = mixer->shift; + u32 dai_id = widget->shift; if (enable) { if (spk_tx_id == WSA_MACRO_TX0 && !test_bit(WSA_MACRO_TX0, - &wsa->active_ch_mask[WSA_MACRO_AIF_VI])) { + &wsa->active_ch_mask[dai_id])) { set_bit(WSA_MACRO_TX0, - &wsa->active_ch_mask[WSA_MACRO_AIF_VI]); - wsa->active_ch_cnt[WSA_MACRO_AIF_VI]++; + &wsa->active_ch_mask[dai_id]); + wsa->active_ch_cnt[dai_id]++; } if (spk_tx_id == WSA_MACRO_TX1 && !test_bit(WSA_MACRO_TX1, - &wsa->active_ch_mask[WSA_MACRO_AIF_VI])) { + &wsa->active_ch_mask[dai_id])) { set_bit(WSA_MACRO_TX1, - &wsa->active_ch_mask[WSA_MACRO_AIF_VI]); - wsa->active_ch_cnt[WSA_MACRO_AIF_VI]++; + &wsa->active_ch_mask[dai_id]); + wsa->active_ch_cnt[dai_id]++; } } else { if (spk_tx_id == WSA_MACRO_TX0 && test_bit(WSA_MACRO_TX0, - &wsa->active_ch_mask[WSA_MACRO_AIF_VI])) { + &wsa->active_ch_mask[dai_id])) { clear_bit(WSA_MACRO_TX0, - &wsa->active_ch_mask[WSA_MACRO_AIF_VI]); - wsa->active_ch_cnt[WSA_MACRO_AIF_VI]--; + &wsa->active_ch_mask[dai_id]); + wsa->active_ch_cnt[dai_id]--; } if (spk_tx_id == WSA_MACRO_TX1 && test_bit(WSA_MACRO_TX1, - &wsa->active_ch_mask[WSA_MACRO_AIF_VI])) { + &wsa->active_ch_mask[dai_id])) { clear_bit(WSA_MACRO_TX1, - &wsa->active_ch_mask[WSA_MACRO_AIF_VI]); - wsa->active_ch_cnt[WSA_MACRO_AIF_VI]--; + &wsa->active_ch_mask[dai_id]); + wsa->active_ch_cnt[dai_id]--; } } snd_soc_dapm_mixer_update_power(widget->dapm, kcontrol, enable, NULL); -- 2.43.0

2 1

[PATCH] ASoC: cs42l42: Convert comma to semicolon
by Chen Ni 29 Jul '24

29 Jul '24

Replace a comma between expression statements by a semicolon. Fixes: 90f6a2a20bd2 ("ASoC: cs42l42: Add SoundWire support") Signed-off-by: Chen Ni <nichen(a)iscas.ac.cn> --- sound/soc/codecs/cs42l42-sdw.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/cs42l42-sdw.c b/sound/soc/codecs/cs42l42-sdw.c index 94a66a325303..29891c1f6bec 100644 --- a/sound/soc/codecs/cs42l42-sdw.c +++ b/sound/soc/codecs/cs42l42-sdw.c @@ -323,15 +323,15 @@ static int cs42l42_sdw_read_prop(struct sdw_slave *peripheral) prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; /* DP1 - capture */ - ports[0].num = CS42L42_SDW_CAPTURE_PORT, - ports[0].type = SDW_DPN_FULL, - ports[0].ch_prep_timeout = 10, + ports[0].num = CS42L42_SDW_CAPTURE_PORT; + ports[0].type = SDW_DPN_FULL; + ports[0].ch_prep_timeout = 10; prop->src_dpn_prop = &ports[0]; /* DP2 - playback */ - ports[1].num = CS42L42_SDW_PLAYBACK_PORT, - ports[1].type = SDW_DPN_FULL, - ports[1].ch_prep_timeout = 10, + ports[1].num = CS42L42_SDW_PLAYBACK_PORT; + ports[1].type = SDW_DPN_FULL; + ports[1].ch_prep_timeout = 10; prop->sink_dpn_prop = &ports[1]; return 0; -- 2.25.1

4 3