- Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: codecs: ES8326: Reduce pop noise
by Zhang Yi 05 Nov '24

05 Nov '24

We modify the value of ES8326_ANA_MICBIAS to reduce the pop noise Signed-off-by: Zhang Yi <zhangyi(a)everest-semi.com> --- sound/soc/codecs/es8326.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index aa3e364827c8..a5603b617688 100755 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -616,7 +616,7 @@ static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction) 0x0F, 0x0F); if (es8326->version > ES8326_VERSION_B) { regmap_update_bits(es8326->regmap, ES8326_VMIDSEL, 0x40, 0x40); - regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x00); + regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x10); } } } else { @@ -1082,7 +1082,7 @@ static void es8326_init(struct snd_soc_component *component) regmap_write(es8326->regmap, ES8326_ADC2_SRC, 0x66); es8326_disable_micbias(es8326->component); if (es8326->version > ES8326_VERSION_B) { - regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x73, 0x03); + regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x73, 0x13); regmap_update_bits(es8326->regmap, ES8326_VMIDSEL, 0x40, 0x40); } -- 2.17.1

2 1

[PATCH v3 2/2] ASoC: sma1307: Add driver for Iron Device SMA1307
by Ki-Seok Jo 05 Nov '24

05 Nov '24

The Iron Device SMA1307 is a boosted digital speaker amplifier v2 -> v3 - Use BIT() macro - Changed the value in sizeof - Designated as const - Removed the retry functionality from the regmap functions - Removed the remove callback function from the component driver - Added match data and I2C ID table - Applied the value when setting the binary mode - Removed unused variable - Removed some error log - Removed cache_type member - Changed the configuration for one shot control - Modified the 'Amp Enable Switch' and 'Binary Mode Control' - Removed the reutrn value for regmap - Change 'check fault' from sysfs to ALSA control - Fix for the error in workqueue polling operation - Uevent configuration in fault situation - Fixed typos Signed-off-by: Kiseok Jo <kiseok.jo(a)irondevice.com> --- To | 0 sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sma1307.c | 2052 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/sma1307.h | 444 ++++++++++ 5 files changed, 2508 insertions(+) diff --git a/To b/To new file mode 100644 index 000000000..e69de29bb diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index c6c4c7481..3484a3f68 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -236,6 +236,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_SIMPLE_AMPLIFIER imply SND_SOC_SIMPLE_MUX imply SND_SOC_SMA1303 + imply SND_SOC_SMA1307 imply SND_SOC_SPDIF imply SND_SOC_SRC4XXX_I2C imply SND_SOC_SSM2305 @@ -1836,6 +1837,15 @@ config SND_SOC_SMA1303 help Enable support for Iron Device SMA1303 Boosted Class-D amplifier +config SND_SOC_SMA1307 + tristate "Iron Device SMA1307 Audio Amplifier" + depends on I2C + help + Enable support for Iron Device SMA1307 boosted digital speaker + amplifier with feedback-loop. + If you are using a system with an SMA1307 amplifier connected + via I2C, enable this option. + config SND_SOC_SPDIF tristate "S/PDIF CODEC" diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 850c6249e..4b29fd4bd 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -274,6 +274,7 @@ snd-soc-sigmadsp-i2c-y := sigmadsp-i2c.o snd-soc-sigmadsp-regmap-y := sigmadsp-regmap.o snd-soc-si476x-y := si476x.o snd-soc-sma1303-y := sma1303.o +snd-soc-sma1307-y := sma1307.o snd-soc-spdif-tx-y := spdif_transmitter.o snd-soc-spdif-rx-y := spdif_receiver.o snd-soc-src4xxx-y := src4xxx.o @@ -678,6 +679,7 @@ obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o obj-$(CONFIG_SND_SOC_SIGMADSP_REGMAP) += snd-soc-sigmadsp-regmap.o obj-$(CONFIG_SND_SOC_SI476X) += snd-soc-si476x.o obj-$(CONFIG_SND_SOC_SMA1303) += snd-soc-sma1303.o +obj-$(CONFIG_SND_SOC_SMA1307) += snd-soc-sma1307.o obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o obj-$(CONFIG_SND_SOC_SRC4XXX) += snd-soc-src4xxx.o obj-$(CONFIG_SND_SOC_SRC4XXX_I2C) += snd-soc-src4xxx-i2c.o diff --git a/sound/soc/codecs/sma1307.c b/sound/soc/codecs/sma1307.c new file mode 100644 index 000000000..985a247b3 --- /dev/null +++ b/sound/soc/codecs/sma1307.c @@ -0,0 +1,2052 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// sma1307.c -- sma1307 ALSA SoC Audio driver +// +// Copyright 2024 Iron Device Corporation +// +// Auther: Gyuhwa Park <gyuwha.park(a)irondevice.com> +// Auther: Kiseok Jo <kiseok.jo(a)irondevice.com> + +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <sound/pcm_params.h> +#include <sound/tlv.h> +#include "sma1307.h" + +#define CHECK_PERIOD_TIME 1 /* sec per HZ */ +#define PLL_MATCH(_input_clk_name, _output_clk_name, _input_clk,\ + _post_n, _n, _vco, _p_cp)\ +{\ + .input_clk_name = _input_clk_name,\ + .output_clk_name = _output_clk_name,\ + .input_clk = _input_clk,\ + .post_n = _post_n,\ + .n = _n,\ + .vco = _vco,\ + .p_cp = _p_cp,\ +} + +static const char *setting_file = "sma1307_setting.bin"; +#define SMA1307_SETTING_CHECKSUM 0x100000 + +/* PLL clock setting Table */ +struct sma1307_pll_match { + char *input_clk_name; + char *output_clk_name; + unsigned int input_clk; + unsigned int post_n; + unsigned int n; + unsigned int vco; + unsigned int p_cp; +}; + +struct sma1307_data { + char *name; + void (*init)(struct regmap *regmap); +}; + +struct sma1307_priv { + bool check_fault_status; + bool force_mute_status; + bool sw_ot1_prot; + char *name; + enum sma1307_mode amp_mode; + int binary_mode; + int dapm_aif_in; + int dapm_aif_out0; + int dapm_aif_out1; + int dapm_sdo_en; + int dapm_sdo_setting; + int num_of_pll_matches; + int check_fault_period; + struct delayed_work check_fault_work; + struct device *dev; + struct kobject *kobj; + struct mutex default_lock; + struct regmap *regmap; + struct sma1307_setting_file set; + const struct sma1307_pll_match *pll_matches; + const struct sma1307_data *data; + unsigned int cur_vol; + unsigned int format; + unsigned int frame_size; + unsigned int init_vol; + unsigned int last_bclk; + unsigned int otp_trm2; + unsigned int otp_trm3; + unsigned int rev_num; + unsigned int sys_clk_id; + unsigned int tdm_slot0_rx; + unsigned int tdm_slot1_rx; + unsigned int tdm_slot0_tx; + unsigned int tdm_slot1_tx; + unsigned int tsdw_cnt; +}; + +static const struct sma1307_pll_match sma1307_pll_matches[] = { + /* in_clk_name, out_clk_name, input_clk post_n, n, vco, p_cp */ + PLL_MATCH("1.411MHz", "24.554MHz", + 1411200, 0x06, 0xD1, 0x88, 0x00), + PLL_MATCH("1.536MHz", "24.576MHz", + 1536000, 0x06, 0xC0, 0x88, 0x00), + PLL_MATCH("2.822MHz", "24.554MHz", + 2822400, 0x06, 0xD1, 0x88, 0x04), + PLL_MATCH("3.072MHz", "24.576MHz", + 3072000, 0x06, 0x60, 0x88, 0x00), + PLL_MATCH("6.144MHz", "24.576MHz", + 6144000, 0x06, 0x60, 0x88, 0x04), + PLL_MATCH("12.288MHz", "24.576MHz", + 12288000, 0x06, 0x60, 0x88, 0x08), + PLL_MATCH("19.2MHz", "24.48MHz", + 19200000, 0x06, 0x7B, 0x88, 0x0C), + PLL_MATCH("24.576MHz", "24.576MHz", + 24576000, 0x06, 0x60, 0x88, 0x0C), +}; + +static struct snd_soc_component *sma1307_amp_component; + +static void sma1307_startup(struct snd_soc_component *); +static void sma1307_shutdown(struct snd_soc_component *); +static void sma1307_reset(struct snd_soc_component *); +static void sma1307_set_binary(struct snd_soc_component *); +static void sma1307_set_default(struct snd_soc_component *); + +/* Initial register value - 6.0W SPK (8ohm load) */ +static const struct reg_default sma1307_reg_def[] = { + { 0x00, 0x80 }, + { 0x01, 0x00 }, + { 0x02, 0x52 }, + { 0x03, 0x4C }, + { 0x04, 0x47 }, + { 0x05, 0x42 }, + { 0x06, 0x40 }, + { 0x07, 0x40 }, + { 0x08, 0x3C }, + { 0x09, 0x2F }, + { 0x0A, 0x32 }, + { 0x0B, 0x50 }, + { 0x0C, 0x8C }, + { 0x0D, 0x00 }, + { 0x0E, 0x3F }, + { 0x0F, 0x00 }, + { 0x10, 0x00 }, + { 0x11, 0x00 }, + { 0x12, 0x00 }, + { 0x13, 0x09 }, + { 0x14, 0x12 }, + { 0x1C, 0x00 }, + { 0x1D, 0x85 }, + { 0x1E, 0xA1 }, + { 0x1F, 0x67 }, + { 0x22, 0x00 }, + { 0x23, 0x1F }, + { 0x24, 0x7A }, + { 0x25, 0x00 }, + { 0x26, 0xFF }, + { 0x27, 0x39 }, + { 0x28, 0x54 }, + { 0x29, 0x92 }, + { 0x2A, 0xB0 }, + { 0x2B, 0xED }, + { 0x2C, 0xED }, + { 0x2D, 0xFF }, + { 0x2E, 0xFF }, + { 0x2F, 0xFF }, + { 0x30, 0xFF }, + { 0x31, 0xFF }, + { 0x32, 0xFF }, + { 0x34, 0x01 }, + { 0x35, 0x17 }, + { 0x36, 0x92 }, + { 0x37, 0x00 }, + { 0x38, 0x01 }, + { 0x39, 0x10 }, + { 0x3E, 0x01 }, + { 0x3F, 0x08 }, + { 0x8B, 0x05 }, + { 0x8C, 0x50 }, + { 0x8D, 0x80 }, + { 0x8E, 0x10 }, + { 0x8F, 0x02 }, + { 0x90, 0x02 }, + { 0x91, 0x83 }, + { 0x92, 0xC0 }, + { 0x93, 0x00 }, + { 0x94, 0xA4 }, + { 0x95, 0x74 }, + { 0x96, 0x57 }, + { 0xA2, 0xCC }, + { 0xA3, 0x28 }, + { 0xA4, 0x40 }, + { 0xA5, 0x01 }, + { 0xA6, 0x41 }, + { 0xA7, 0x08 }, + { 0xA8, 0x04 }, + { 0xA9, 0x27 }, + { 0xAA, 0x10 }, + { 0xAB, 0x10 }, + { 0xAC, 0x10 }, + { 0xAD, 0x0F }, + { 0xAE, 0xCD }, + { 0xAF, 0x70 }, + { 0xB0, 0x03 }, + { 0xB1, 0xEF }, + { 0xB2, 0x03 }, + { 0xB3, 0xEF }, + { 0xB4, 0xF3 }, + { 0xB5, 0x3D }, +}; + +static bool sma1307_readable_register(struct device *dev, unsigned int reg) +{ + if (reg > SMA1307_FF_DEVICE_INDEX) + return false; + + switch (reg) { + case SMA1307_00_SYSTEM_CTRL ... SMA1307_1F_TONE_FINE_VOLUME: + case SMA1307_22_COMP_HYS_SEL ... SMA1307_32_BROWN_OUT_PROT19: + case SMA1307_34_OCP_SPK ... SMA1307_39_PMT_NZ_VAL: + case SMA1307_3B_TEST1 ... SMA1307_3F_ATEST2: + case SMA1307_8B_PLL_POST_N ... SMA1307_9A_OTP_TRM3: + case SMA1307_A0_PAD_CTRL0 ... SMA1307_BE_MCBS_CTRL2: + case SMA1307_F5_READY_FOR_V_SAR: + case SMA1307_F7_READY_FOR_T_SAR ... SMA1307_FF_DEVICE_INDEX: + break; + default: + return false; + } + return true; +} + +static bool sma1307_writeable_register(struct device *dev, unsigned int reg) +{ + if (reg > SMA1307_FF_DEVICE_INDEX) + return false; + + switch (reg) { + case SMA1307_00_SYSTEM_CTRL ... SMA1307_1F_TONE_FINE_VOLUME: + case SMA1307_22_COMP_HYS_SEL ... SMA1307_32_BROWN_OUT_PROT19: + case SMA1307_34_OCP_SPK ... SMA1307_39_PMT_NZ_VAL: + case SMA1307_3B_TEST1 ... SMA1307_3F_ATEST2: + case SMA1307_8B_PLL_POST_N ... SMA1307_9A_OTP_TRM3: + case SMA1307_A0_PAD_CTRL0 ... SMA1307_BE_MCBS_CTRL2: + break; + default: + return false; + } + return true; +} + +static bool sma1307_volatile_register(struct device *dev, unsigned int reg) +{ + if (reg > SMA1307_FF_DEVICE_INDEX) + return false; + + switch (reg) { + case SMA1307_F8_STATUS_T1 ... SMA1307_FF_DEVICE_INDEX: + break; + default: + return false; + } + return true; +} + +/* DB scale conversion of speaker volume */ +static const DECLARE_TLV_DB_SCALE(sma1307_spk_tlv, -6000, 50, 0); + +static const char *const sma1307_aif_in_source_text[] = { + "Mono", "Left", "Right" +}; + +static const char *const sma1307_sdo_setting_text[] = { + "Data_One_48k", "Data_Two_48k", "Data_Two_24k", + "Clk_PLL", "Clk_OSC" +}; + +static const char *const sma1307_aif_out_source_text[] = { + "Disable", "After_FmtC", "After_Mixer", "After_DSP", + "Vrms2_Avg", "Battery", "Temperature", "After_Delay" +}; + +static const char *const sma1307_tdm_slot_text[] = { + "Slot0", "Slot1", "Slot2", "Slot3", + "Slot4", "Slot5", "Slot6", "Slot7" +}; + +static const char *const sma1307_binary_mode_text[] = { + "Mode0", "Mode1", "Mode2", "Mode3", "Mode4" +}; + +static const char *const sma1307_reset_text[] = { + "Reset" +}; + +static const struct soc_enum sma1307_aif_in_source_enum = +SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_aif_in_source_text), + sma1307_aif_in_source_text); +static const struct soc_enum sma1307_sdo_setting_enum = +SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_sdo_setting_text), + sma1307_sdo_setting_text); +static const struct soc_enum sma1307_aif_out_source_enum = +SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_aif_out_source_text), + sma1307_aif_out_source_text); +static const struct soc_enum sma1307_tdm_slot_enum = +SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_tdm_slot_text), + sma1307_tdm_slot_text); +static const struct soc_enum sma1307_binary_mode_enum = +SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_binary_mode_text), + sma1307_binary_mode_text); +static const struct soc_enum sma1307_reset_enum = +SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_reset_text), + sma1307_reset_text); + +static int sma1307_force_mute_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = (int)sma1307->force_mute_status; + + return 0; +} + +static int sma1307_force_mute_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + bool change = false, val = (bool)ucontrol->value.integer.value[0]; + + if (sma1307->force_mute_status == val) { + change = false; + } else { + change = true; + sma1307->force_mute_status = val; + } + + return change; +} + +static int sma1307_tdm_slot_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + int val1, val2; + + regmap_read(sma1307->regmap, SMA1307_A5_TDM1, &val1); + regmap_read(sma1307->regmap, SMA1307_A6_TDM2, &val2); + + if (!strcmp(kcontrol->id.name, SMA1307_TDM_RX0_POS_NAME)) { + ucontrol->value.integer.value[0] + = (val1 & SMA1307_TDM_SLOT0_RX_POS_MASK) >> 3; + sma1307->tdm_slot0_rx = ucontrol->value.integer.value[0]; + } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_RX1_POS_NAME)) { + ucontrol->value.integer.value[0] + = val1 & SMA1307_TDM_SLOT1_RX_POS_MASK; + sma1307->tdm_slot1_rx = ucontrol->value.integer.value[0]; + } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_TX0_POS_NAME)) { + ucontrol->value.integer.value[0] + = (val2 & SMA1307_TDM_SLOT0_TX_POS_MASK) >> 3; + sma1307->tdm_slot0_tx = ucontrol->value.integer.value[0]; + } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_TX1_POS_NAME)) { + ucontrol->value.integer.value[0] + = val2 & SMA1307_TDM_SLOT1_TX_POS_MASK; + sma1307->tdm_slot1_tx = ucontrol->value.integer.value[0]; + } else { + return -EINVAL; + } + + return 0; +} + +static int sma1307_tdm_slot_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + int val = (int)ucontrol->value.integer.value[0]; + bool change; + + if (!strcmp(kcontrol->id.name, SMA1307_TDM_RX0_POS_NAME)) { + if (sma1307->tdm_slot0_rx == val) + change = false; + else { + change = true; + sma1307->tdm_slot0_rx = val; + regmap_update_bits(sma1307->regmap, SMA1307_A5_TDM1, + SMA1307_TDM_SLOT0_RX_POS_MASK, val << 3); + } + } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_RX1_POS_NAME)) { + if (sma1307->tdm_slot1_rx == val) + change = false; + else { + change = true; + sma1307->tdm_slot1_rx = val; + regmap_update_bits(sma1307->regmap, SMA1307_A5_TDM1, + SMA1307_TDM_SLOT1_RX_POS_MASK, val); + } + } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_TX0_POS_NAME)) { + if (sma1307->tdm_slot0_tx == val) + change = false; + else { + change = true; + sma1307->tdm_slot0_tx = val; + regmap_update_bits(sma1307->regmap, SMA1307_A6_TDM2, + SMA1307_TDM_SLOT0_TX_POS_MASK, val << 3); + } + } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_TX1_POS_NAME)) { + if (sma1307->tdm_slot1_tx == val) + change = false; + else { + change = true; + sma1307->tdm_slot1_tx = val; + regmap_update_bits(sma1307->regmap, SMA1307_A6_TDM2, + SMA1307_TDM_SLOT1_TX_POS_MASK, val); + } + } else { + dev_err(sma1307->dev, "%s: Invalid Control ID - %s\n", + __func__, kcontrol->id.name); + return -EINVAL; + } + + return change; +} + +static int sma1307_sw_ot1_prot_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = (int)sma1307->sw_ot1_prot; + + return 0; +} + +static int sma1307_sw_ot1_prot_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + bool change = false, val = (bool)ucontrol->value.integer.value[0]; + + if (sma1307->sw_ot1_prot == val) + change = false; + else { + change = true; + sma1307->sw_ot1_prot = val; + } + + return change; +} + +static int sma1307_check_fault_status_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = (int)sma1307->check_fault_status; + + return 0; +} + +static int sma1307_check_fault_status_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + bool change = false, val = (bool)ucontrol->value.integer.value[0]; + + if (sma1307->check_fault_status == val) { + change = false; + } else { + change = true; + sma1307->check_fault_status = val; + } + + return change; +} + +static int sma1307_check_fault_period_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = sma1307->check_fault_period; + + return 0; +} + +static int sma1307_check_fault_period_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + bool change = false; + int val = ucontrol->value.integer.value[0]; + + if (val < mc->min || val > mc->max) + return -EINVAL; + if (sma1307->check_fault_period == val) { + change = false; + } else { + change = true; + sma1307->check_fault_period = val; + } + + return change; +} + +static int sma1307_reset_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + regmap_update_bits(sma1307->regmap, SMA1307_00_SYSTEM_CTRL, + SMA1307_RESET_MASK, SMA1307_RESET_ON); + sma1307_reset(component); + + snd_ctl_notify(component->card->snd_card, SNDRV_CTL_EVENT_MASK_VALUE, + &kcontrol->id); + + return true; +} + +static int sma1307_binary_mode_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1307_priv *sma1307 = snd_kcontrol_chip(kcontrol); + + sma1307->binary_mode = (int)ucontrol->value.enumerated.item[0]; + if (sma1307->set.status) + sma1307_set_binary(component); + + return snd_soc_put_enum_double(kcontrol, ucontrol); +} + +static void sma1307_startup(struct snd_soc_component *component) +{ + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + regmap_update_bits(sma1307->regmap, SMA1307_A2_TOP_MAN1, + SMA1307_PLL_MASK, SMA1307_PLL_ON); + regmap_update_bits(sma1307->regmap, SMA1307_00_SYSTEM_CTRL, + SMA1307_POWER_MASK, SMA1307_POWER_ON); + + if (sma1307->amp_mode == SMA1307_MONO_MODE) { + regmap_update_bits(sma1307->regmap, + SMA1307_10_SYSTEM_CTRL1, + SMA1307_SPK_MODE_MASK, + SMA1307_SPK_MONO); + } else { + regmap_update_bits(sma1307->regmap, + SMA1307_10_SYSTEM_CTRL1, + SMA1307_SPK_MODE_MASK, + SMA1307_SPK_STEREO); + } + + if (sma1307->check_fault_status) { + if (sma1307->check_fault_period > 0) + queue_delayed_work(system_freezable_wq, + &sma1307->check_fault_work, + sma1307->check_fault_period * HZ); + else + queue_delayed_work(system_freezable_wq, + &sma1307->check_fault_work, + CHECK_PERIOD_TIME * HZ); + } +} + +static void sma1307_shutdown(struct snd_soc_component *component) +{ + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + /* for SMA1307A */ + cancel_delayed_work_sync(&sma1307->check_fault_work); + + regmap_update_bits(sma1307->regmap, SMA1307_0E_MUTE_VOL_CTRL, + SMA1307_SPK_MUTE_MASK, SMA1307_SPK_MUTE); + /* Need to wait time for mute slope */ + msleep(55); + + regmap_update_bits(sma1307->regmap, SMA1307_10_SYSTEM_CTRL1, + SMA1307_SPK_MODE_MASK, SMA1307_SPK_OFF); + regmap_update_bits(sma1307->regmap, SMA1307_A2_TOP_MAN1, + SMA1307_PLL_MASK, SMA1307_PLL_OFF); + regmap_update_bits(sma1307->regmap, SMA1307_00_SYSTEM_CTRL, + SMA1307_POWER_MASK, SMA1307_POWER_OFF); +} + +static int sma1307_aif_in_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + unsigned int mux = sma1307->dapm_aif_in; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + switch (mux) { + case SMA1307_MONO_MODE: + regmap_update_bits(sma1307->regmap, + SMA1307_11_SYSTEM_CTRL2, + SMA1307_MONOMIX_MASK, + SMA1307_MONOMIX_ON); + break; + case SMA1307_LEFT_MODE: + regmap_update_bits(sma1307->regmap, + SMA1307_11_SYSTEM_CTRL2, + SMA1307_MONOMIX_MASK, + SMA1307_MONOMIX_OFF); + regmap_update_bits(sma1307->regmap, + SMA1307_11_SYSTEM_CTRL2, + SMA1307_LR_DATA_SW_MASK, + SMA1307_LR_DATA_SW_NORMAL); + break; + case SMA1307_RIGHT_MODE: + regmap_update_bits(sma1307->regmap, + SMA1307_11_SYSTEM_CTRL2, + SMA1307_MONOMIX_MASK, + SMA1307_MONOMIX_OFF); + regmap_update_bits(sma1307->regmap, + SMA1307_11_SYSTEM_CTRL2, + SMA1307_LR_DATA_SW_MASK, + SMA1307_LR_DATA_SW_SWAP); + break; + default: + + dev_err(sma1307->dev, "%s: Invalid value (%d)\n", + __func__, mux); + return -EINVAL; + } + sma1307->amp_mode = mux; + break; + } + return 0; +} + +static int sma1307_sdo_setting_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + unsigned int mux = sma1307->dapm_sdo_setting; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + switch (mux) { + case SMA1307_OUT_DATA_ONE_48K: + regmap_update_bits(sma1307->regmap, + SMA1307_A2_TOP_MAN1, + SMA1307_SDO_OUTPUT2_MASK, + SMA1307_ONE_SDO_PER_CH); + regmap_update_bits(sma1307->regmap, + SMA1307_A3_TOP_MAN2, + SMA1307_SDO_OUTPUT3_MASK + | + SMA1307_DATA_CLK_SEL_MASK, + SMA1307_SDO_OUTPUT3_DIS + | SMA1307_SDO_DATA); + break; + case SMA1307_OUT_DATA_TWO_48K: + regmap_update_bits(sma1307->regmap, + SMA1307_A2_TOP_MAN1, + SMA1307_SDO_OUTPUT2_MASK, + SMA1307_TWO_SDO_PER_CH); + regmap_update_bits(sma1307->regmap, + SMA1307_A3_TOP_MAN2, + SMA1307_SDO_OUTPUT3_MASK + | + SMA1307_DATA_CLK_SEL_MASK, + SMA1307_SDO_OUTPUT3_DIS + | SMA1307_SDO_DATA); + break; + case SMA1307_OUT_DATA_TWO_24K: + regmap_update_bits(sma1307->regmap, + SMA1307_A2_TOP_MAN1, + SMA1307_SDO_OUTPUT2_MASK, + SMA1307_TWO_SDO_PER_CH); + regmap_update_bits(sma1307->regmap, + SMA1307_A3_TOP_MAN2, + SMA1307_SDO_OUTPUT3_MASK + | + SMA1307_DATA_CLK_SEL_MASK, + SMA1307_TWO_SDO_PER_CH_24K + | SMA1307_SDO_DATA); + break; + case SMA1307_OUT_CLK_PLL: + regmap_update_bits(sma1307->regmap, + SMA1307_A3_TOP_MAN2, + SMA1307_DATA_CLK_SEL_MASK, + SMA1307_SDO_CLK_PLL); + + break; + case SMA1307_OUT_CLK_OSC: + regmap_update_bits(sma1307->regmap, + SMA1307_A3_TOP_MAN2, + SMA1307_DATA_CLK_SEL_MASK, + SMA1307_SDO_CLK_OSC); + + break; + default: + dev_err(sma1307->dev, "%s: Invalid value (%d)\n", + __func__, mux); + return -EINVAL; + } + break; + } + return 0; +} + +static int sma1307_aif_out_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + unsigned int mux = 0, val = 0, mask = 0; + + if (!strcmp(w->name, SMA1307_AIF_OUT0_NAME)) { + mux = sma1307->dapm_aif_out0; + val = mux; + mask = SMA1307_SDO_OUT0_SEL_MASK; + } else if (!strcmp(w->name, SMA1307_AIF_OUT1_NAME)) { + mux = sma1307->dapm_aif_out1; + val = mux << 3; + mask = SMA1307_SDO_OUT1_SEL_MASK; + } else { + dev_err(sma1307->dev, "%s: Invalid widget - %s\n", + __func__, w->name); + return -EINVAL; + } + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + regmap_update_bits(sma1307->regmap, SMA1307_09_OUTPUT_CTRL, + mask, val); + break; + } + return 0; +} + +static int sma1307_sdo_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + regmap_update_bits(sma1307->regmap, + SMA1307_09_OUTPUT_CTRL, + SMA1307_PORT_CONFIG_MASK, + SMA1307_OUTPUT_PORT_ENABLE); + regmap_update_bits(sma1307->regmap, + SMA1307_A3_TOP_MAN2, + SMA1307_SDO_OUTPUT_MASK, + SMA1307_LOGIC_OUTPUT); + break; + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(sma1307->regmap, + SMA1307_09_OUTPUT_CTRL, + SMA1307_PORT_CONFIG_MASK, + SMA1307_INPUT_PORT_ONLY); + regmap_update_bits(sma1307->regmap, + SMA1307_A3_TOP_MAN2, + SMA1307_SDO_OUTPUT_MASK, + SMA1307_HIGH_Z_OUTPUT); + break; + } + return 0; +} + +static int sma1307_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + sma1307_startup(component); + break; + case SND_SOC_DAPM_PRE_PMD: + sma1307_shutdown(component); + break; + } + return 0; +} + +static int sma1307_dapm_aif_in_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct sma1307_priv *sma1307 = + snd_soc_component_get_drvdata(dapm->component); + + ucontrol->value.enumerated.item[0] = (unsigned int)sma1307->dapm_aif_in; + snd_soc_dapm_put_enum_double(kcontrol, ucontrol); + + return 0; +} + +static int sma1307_dapm_aif_in_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct sma1307_priv *sma1307 = + snd_soc_component_get_drvdata(dapm->component); + int val = (int)ucontrol->value.enumerated.item[0]; + bool change; + + if ((val < 0) || (val >= ARRAY_SIZE(sma1307_aif_in_source_text))) { + dev_err(sma1307->dev, "%s: Out of range\n", __func__); + return -EINVAL; + } + + if (sma1307->dapm_aif_in != val) { + change = true; + sma1307->dapm_aif_in = val; + } else + change = false; + + snd_soc_dapm_put_enum_double(kcontrol, ucontrol); + + return change; +} + +static int sma1307_dapm_sdo_setting_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct sma1307_priv *sma1307 = + snd_soc_component_get_drvdata(dapm->component); + + ucontrol->value.enumerated.item[0] = + (unsigned int)sma1307->dapm_sdo_setting; + snd_soc_dapm_put_enum_double(kcontrol, ucontrol); + + return 0; +} + +static int sma1307_dapm_sdo_setting_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct sma1307_priv *sma1307 = + snd_soc_component_get_drvdata(dapm->component); + int val = (int)ucontrol->value.enumerated.item[0]; + bool change; + + if ((val < 0) || (val >= ARRAY_SIZE(sma1307_sdo_setting_text))) { + dev_err(sma1307->dev, "%s: Out of range\n", __func__); + return -EINVAL; + } + + if (sma1307->dapm_sdo_setting != val) { + change = true; + sma1307->dapm_sdo_setting = val; + } else + change = false; + + snd_soc_dapm_put_enum_double(kcontrol, ucontrol); + + return change; +} + +static int sma1307_dapm_aif_out_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct sma1307_priv *sma1307 = + snd_soc_component_get_drvdata(dapm->component); + unsigned int val = 0; + + if (!strcmp(kcontrol->id.name, SMA1307_AIF_OUT0_NAME)) { + val = (unsigned int)sma1307->dapm_aif_out0; + } else if (!strcmp(kcontrol->id.name, SMA1307_AIF_OUT1_NAME)) { + val = (unsigned int)sma1307->dapm_aif_out1; + } else { + dev_err(sma1307->dev, "%s: Invalid Control ID - %s\n", + __func__, kcontrol->id.name); + return -EINVAL; + } + ucontrol->value.enumerated.item[0] = val; + snd_soc_dapm_put_enum_double(kcontrol, ucontrol); + + return 0; +} + +static int sma1307_dapm_aif_out_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct sma1307_priv *sma1307 = + snd_soc_component_get_drvdata(dapm->component); + int val = (int)ucontrol->value.enumerated.item[0]; + bool change; + + if ((val < 0) || (val >= ARRAY_SIZE(sma1307_aif_out_source_text))) { + dev_err(sma1307->dev, "%s: Out of range\n", __func__); + return -EINVAL; + } + + if (!strcmp(kcontrol->id.name, SMA1307_AIF_OUT0_NAME)) { + if (sma1307->dapm_aif_out0 != val) { + change = true; + sma1307->dapm_aif_out0 = val; + } else + change = false; + } else if (!strcmp(kcontrol->id.name, SMA1307_AIF_OUT1_NAME)) { + if (sma1307->dapm_aif_out1 != val) { + change = true; + sma1307->dapm_aif_out1 = val; + } else + change = false; + } else { + dev_err(sma1307->dev, "%s: Invalid Control ID - %s\n", + __func__, kcontrol->id.name); + return -EINVAL; + } + + snd_soc_dapm_put_enum_double(kcontrol, ucontrol); + + return change; +} + +static int sma1307_dapm_sdo_enable_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct sma1307_priv *sma1307 = + snd_soc_component_get_drvdata(dapm->component); + + ucontrol->value.integer.value[0] = (long)sma1307->dapm_sdo_en; + snd_soc_dapm_put_volsw(kcontrol, ucontrol); + + return 0; +} + +static int sma1307_dapm_sdo_enable_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct sma1307_priv *sma1307 = + snd_soc_component_get_drvdata(dapm->component); + int val = (int)ucontrol->value.integer.value[0]; + bool change; + + if ((val < 0) || (val > 1)) { + dev_err(sma1307->dev, "%s: Out of range\n", __func__); + return -EINVAL; + } + + if (sma1307->dapm_sdo_en != val) { + change = true; + sma1307->dapm_sdo_en = val; + } else + change = false; + + snd_soc_dapm_put_volsw(kcontrol, ucontrol); + + return change; +} + +static const struct snd_kcontrol_new sma1307_aif_in_source_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = SMA1307_AIF_IN_NAME, + .info = snd_soc_info_enum_double, + .get = sma1307_dapm_aif_in_get, + .put = sma1307_dapm_aif_in_put, + .private_value = (unsigned long)&sma1307_aif_in_source_enum +}; + +static const struct snd_kcontrol_new sma1307_sdo_setting_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "SDO Setting", + .info = snd_soc_info_enum_double, + .get = sma1307_dapm_sdo_setting_get, + .put = sma1307_dapm_sdo_setting_put, + .private_value = (unsigned long)&sma1307_sdo_setting_enum +}; + +static const struct snd_kcontrol_new sma1307_aif_out0_source_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = SMA1307_AIF_OUT0_NAME, + .info = snd_soc_info_enum_double, + .get = sma1307_dapm_aif_out_get, + .put = sma1307_dapm_aif_out_put, + .private_value = (unsigned long)&sma1307_aif_out_source_enum +}; + +static const struct snd_kcontrol_new sma1307_aif_out1_source_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = SMA1307_AIF_OUT1_NAME, + .info = snd_soc_info_enum_double, + .get = sma1307_dapm_aif_out_get, + .put = sma1307_dapm_aif_out_put, + .private_value = (unsigned long)&sma1307_aif_out_source_enum +}; + +static const struct snd_kcontrol_new sma1307_sdo_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Switch", + .info = snd_soc_info_volsw, + .get = sma1307_dapm_sdo_enable_get, + .put = sma1307_dapm_sdo_enable_put, + .private_value = SOC_SINGLE_VALUE(SND_SOC_NOPM, 0, 1, 0, 0) +}; + +static const struct snd_kcontrol_new sma1307_enable_control = + SOC_DAPM_SINGLE("Switch", SMA1307_00_SYSTEM_CTRL, 0, 1, 0); + +static const struct snd_kcontrol_new sma1307_binary_mode_control[] = { + SOC_ENUM_EXT("Binary Mode", sma1307_binary_mode_enum, + snd_soc_get_enum_double, sma1307_binary_mode_put), +}; + +static const struct snd_kcontrol_new sma1307_snd_controls[] = { + SOC_SINGLE_TLV(SMA1307_VOL_CTRL_NAME, SMA1307_0A_SPK_VOL, + 0, 167, 1, sma1307_spk_tlv), + SOC_ENUM_EXT(SMA1307_TDM_RX0_POS_NAME, sma1307_tdm_slot_enum, + sma1307_tdm_slot_get, sma1307_tdm_slot_put), + SOC_ENUM_EXT(SMA1307_TDM_RX1_POS_NAME, sma1307_tdm_slot_enum, + sma1307_tdm_slot_get, sma1307_tdm_slot_put), + SOC_ENUM_EXT(SMA1307_TDM_TX0_POS_NAME, sma1307_tdm_slot_enum, + sma1307_tdm_slot_get, sma1307_tdm_slot_put), + SOC_ENUM_EXT(SMA1307_TDM_TX1_POS_NAME, sma1307_tdm_slot_enum, + sma1307_tdm_slot_get, sma1307_tdm_slot_put), + SOC_ENUM_EXT(SMA1307_RESET_CTRL_NAME, sma1307_reset_enum, + snd_soc_get_enum_double, sma1307_reset_put), + SOC_SINGLE_BOOL_EXT(SMA1307_FORCE_MUTE_CTRL_NAME, 0, + sma1307_force_mute_get, sma1307_force_mute_put), + SOC_SINGLE_BOOL_EXT(SMA1307_OT1_SW_PROT_CTRL_NAME, 0, + sma1307_sw_ot1_prot_get, sma1307_sw_ot1_prot_put), + SOC_SINGLE_BOOL_EXT(SMA1307_CHECK_FAULT_STATUS_NAME, 0, + sma1307_check_fault_status_get, + sma1307_check_fault_status_put), + SOC_SINGLE_EXT(SMA1307_CHECK_FAULT_PERIOD_NAME, SND_SOC_NOPM, 0, 600, 0, + sma1307_check_fault_period_get, + sma1307_check_fault_period_put), +}; + +static const struct snd_soc_dapm_widget sma1307_dapm_widgets[] = { + /* platform domain */ + SND_SOC_DAPM_OUTPUT("SPK"), + SND_SOC_DAPM_INPUT("SDO"), + + /* path domain */ + SND_SOC_DAPM_MUX_E(SMA1307_AIF_IN_NAME, SND_SOC_NOPM, 0, 0, + &sma1307_aif_in_source_control, + sma1307_aif_in_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_MUX_E("SDO Setting", SND_SOC_NOPM, 0, 0, + &sma1307_sdo_setting_control, + sma1307_sdo_setting_event, + SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_MUX_E(SMA1307_AIF_OUT0_NAME, SND_SOC_NOPM, 0, 0, + &sma1307_aif_out0_source_control, + sma1307_aif_out_event, + SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_MUX_E(SMA1307_AIF_OUT1_NAME, SND_SOC_NOPM, 0, 0, + &sma1307_aif_out1_source_control, + sma1307_aif_out_event, + SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_SWITCH_E("SDO Enable", SND_SOC_NOPM, 0, 0, + &sma1307_sdo_control, + sma1307_sdo_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MIXER("Entry", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_OUT_DRV_E("AMP Power", SND_SOC_NOPM, 0, 0, NULL, 0, + sma1307_power_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD | + SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_SWITCH("AMP Enable", SND_SOC_NOPM, 0, 0, + &sma1307_enable_control), + + /* stream domain */ + SND_SOC_DAPM_AIF_IN("AIF IN", "Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("AIF OUT", "Capture", 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route sma1307_audio_map[] = { + /* Playback */ + { "AIF IN Source", "Mono", "AIF IN" }, + { "AIF IN Source", "Left", "AIF IN" }, + { "AIF IN Source", "Right", "AIF IN" }, + + { "SDO Enable", "Switch", "AIF IN" }, + + { "SDO Setting", "Data_One_48k", "SDO Enable" }, + { "SDO Setting", "Data_Two_48k", "SDO Enable" }, + { "SDO Setting", "Data_Two_24k", "SDO Enable" }, + { "SDO Setting", "Clk_PLL", "SDO Enable" }, + { "SDO Setting", "Clk_OSC", "SDO Enable" }, + + { "AIF OUT0 Source", "Disable", "SDO Setting" }, + { "AIF OUT0 Source", "After_FmtC", "SDO Setting" }, + { "AIF OUT0 Source", "After_Mixer", "SDO Setting" }, + { "AIF OUT0 Source", "After_DSP", "SDO Setting" }, + { "AIF OUT0 Source", "Vrms2_Avg", "SDO Setting" }, + { "AIF OUT0 Source", "Battery", "SDO Setting" }, + { "AIF OUT0 Source", "Temperature", "SDO Setting" }, + { "AIF OUT0 Source", "After_Delay", "SDO Setting" }, + + { "AIF OUT1 Source", "Disable", "SDO Setting" }, + { "AIF OUT1 Source", "After_FmtC", "SDO Setting" }, + { "AIF OUT1 Source", "After_Mixer", "SDO Setting" }, + { "AIF OUT1 Source", "After_DSP", "SDO Setting" }, + { "AIF OUT1 Source", "Vrms2_Avg", "SDO Setting" }, + { "AIF OUT1 Source", "Battery", "SDO Setting" }, + { "AIF OUT1 Source", "Temperature", "SDO Setting" }, + { "AIF OUT1 Source", "After_Delay", "SDO Setting" }, + + { "Entry", NULL, "AIF OUT0 Source" }, + { "Entry", NULL, "AIF OUT1 Source" }, + { "Entry", NULL, "AIF IN Source" }, + + { "AMP Power", NULL, "Entry" }, + + { "AMP Enable", "Switch", "AMP Power" }, + { "SPK", NULL, "AMP Enable" }, + + /* Capture */ + { "AIF OUT", NULL, "AMP Enable" }, +}; + +static void sma1307_setup_pll(struct snd_soc_component *component, + unsigned int bclk) +{ + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + int i = 0; + + dev_dbg(component->dev, "%s: BCLK = %dHz\n", __func__, bclk); + + if (sma1307->sys_clk_id == SMA1307_PLL_CLKIN_MCLK) { + dev_warn(component->dev, "%s: MCLK is not supported\n", + __func__); + } else if (sma1307->sys_clk_id == SMA1307_PLL_CLKIN_BCLK) { + for (i = 0; i < sma1307->num_of_pll_matches; i++) { + if (sma1307->pll_matches[i].input_clk == bclk) + break; + } + if (i == sma1307->num_of_pll_matches) { + dev_warn(component->dev, + "%s: No matching value between pll table and SCK\n", + __func__); + return; + } + + regmap_update_bits(sma1307->regmap, + SMA1307_A2_TOP_MAN1, + SMA1307_PLL_MASK, SMA1307_PLL_ON); + } + + regmap_write(sma1307->regmap, SMA1307_8B_PLL_POST_N, + sma1307->pll_matches[i].post_n); + regmap_write(sma1307->regmap, SMA1307_8C_PLL_N, + sma1307->pll_matches[i].n); + regmap_write(sma1307->regmap, SMA1307_8D_PLL_A_SETTING, + sma1307->pll_matches[i].vco); + regmap_write(sma1307->regmap, SMA1307_8E_PLL_P_CP, + sma1307->pll_matches[i].p_cp); +} + +static int sma1307_dai_hw_params_amp(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + unsigned int bclk = 0; + int ret = 0; + + if (sma1307->format == SND_SOC_DAIFMT_DSP_A) + bclk = params_rate(params) * sma1307->frame_size; + else + bclk = params_rate(params) * params_physical_width(params) + * params_channels(params); + + dev_dbg(component->dev, + "%s: rate = %d : bit size = %d : channel = %d\n", + __func__, params_rate(params), params_width(params), + params_channels(params)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (sma1307->sys_clk_id == SMA1307_PLL_CLKIN_BCLK) { + if (sma1307->last_bclk != bclk) { + sma1307_setup_pll(component, bclk); + sma1307->last_bclk = bclk; + } + } + + switch (params_rate(params)) { + case 8000: + case 12000: + case 16000: + case 24000: + case 32000: + case 44100: + case 48000: + break; + + case 96000: + dev_warn(component->dev, + "%s: %d rate not support SDO\n", __func__, + params_rate(params)); + break; + + default: + dev_err(component->dev, "%s: not support rate : %d\n", + __func__, params_rate(params)); + + return -EINVAL; + } + + /* substream->stream is SNDRV_PCM_STREAM_CAPTURE */ + } else { + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + regmap_update_bits(sma1307->regmap, + SMA1307_A4_TOP_MAN3, + SMA1307_SCK_RATE_MASK + | + SMA1307_DATA_WIDTH_MASK, + SMA1307_SCK_32FS | + SMA1307_DATA_16BIT); + break; + + case SNDRV_PCM_FORMAT_S24_LE: + regmap_update_bits(sma1307->regmap, + SMA1307_A4_TOP_MAN3, + SMA1307_SCK_RATE_MASK + | + SMA1307_DATA_WIDTH_MASK, + SMA1307_SCK_64FS | + SMA1307_DATA_24BIT); + break; + + case SNDRV_PCM_FORMAT_S32_LE: + regmap_update_bits(sma1307->regmap, + SMA1307_A4_TOP_MAN3, + SMA1307_SCK_RATE_MASK + | + SMA1307_DATA_WIDTH_MASK, + SMA1307_SCK_64FS | + SMA1307_DATA_24BIT); + break; + default: + dev_err(component->dev, + "%s: not support data bit : %d\n", __func__, + params_format(params)); + return -EINVAL; + } + } + + switch (sma1307->format) { + case SND_SOC_DAIFMT_I2S: + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_I2S_MODE_MASK, + SMA1307_STANDARD_I2S); + regmap_update_bits(sma1307->regmap, + SMA1307_A4_TOP_MAN3, + SMA1307_INTERFACE_MASK, + SMA1307_I2S_FORMAT); + break; + case SND_SOC_DAIFMT_LEFT_J: + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_I2S_MODE_MASK, SMA1307_LJ); + regmap_update_bits(sma1307->regmap, + SMA1307_A4_TOP_MAN3, + SMA1307_INTERFACE_MASK, + SMA1307_LJ_FORMAT); + break; + case SND_SOC_DAIFMT_RIGHT_J: + switch (params_width(params)) { + case 16: + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_I2S_MODE_MASK, + SMA1307_RJ_16BIT); + break; + case 24: + case 32: + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_I2S_MODE_MASK, + SMA1307_RJ_24BIT); + break; + } + break; + case SND_SOC_DAIFMT_DSP_A: + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_I2S_MODE_MASK, + SMA1307_STANDARD_I2S); + regmap_update_bits(sma1307->regmap, + SMA1307_A4_TOP_MAN3, + SMA1307_INTERFACE_MASK, + SMA1307_TDM_FORMAT); + break; + } + + switch (params_width(params)) { + case 16: + case 24: + case 32: + break; + default: + dev_err(component->dev, + "%s: not support data bit : %d\n", __func__, + params_format(params)); + return -EINVAL; + } + if (ret < 0) + return -EINVAL; + + return 0; +} + +static int sma1307_dai_set_sysclk_amp(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + switch (clk_id) { + case SMA1307_EXTERNAL_CLOCK_19_2: + case SMA1307_EXTERNAL_CLOCK_24_576: + case SMA1307_PLL_CLKIN_MCLK: + case SMA1307_PLL_CLKIN_BCLK: + break; + default: + dev_err(component->dev, "%s: Invalid clk id: %d\n", + __func__, clk_id); + return -EINVAL; + } + sma1307->sys_clk_id = clk_id; + + return 0; +} + +static int sma1307_dai_set_fmt_amp(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + + case SND_SOC_DAIFMT_CBC_CFC: + dev_dbg(component->dev, + "%s: %s\n", __func__, "I2S/TDM Device mode"); + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_CONTROLLER_DEVICE_MASK, + SMA1307_DEVICE_MODE); + break; + + case SND_SOC_DAIFMT_CBP_CFP: + dev_dbg(component->dev, + "%s: %s\n", __func__, "I2S/TDM Controller mode"); + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_CONTROLLER_DEVICE_MASK, + SMA1307_CONTROLLER_MODE); + break; + + default: + dev_err(component->dev, + "%s: Unsupported Controller/Device : 0x%x\n", + __func__, fmt); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_LEFT_J: + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + sma1307->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK; + break; + default: + dev_err(component->dev, + "%s: Unsupported Audio Interface Format : 0x%x\n", + __func__, fmt); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + + case SND_SOC_DAIFMT_IB_NF: + dev_dbg(component->dev, "%s: %s\n", + __func__, "Invert BCLK + Normal Frame"); + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_SCK_RISING_MASK, + SMA1307_SCK_RISING_EDGE); + break; + case SND_SOC_DAIFMT_IB_IF: + dev_dbg(component->dev, "%s: %s\n", + __func__, "Invert BCLK + Invert Frame"); + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_LEFTPOL_MASK + | SMA1307_SCK_RISING_MASK, + SMA1307_HIGH_FIRST_CH + | SMA1307_SCK_RISING_EDGE); + break; + case SND_SOC_DAIFMT_NB_IF: + dev_dbg(component->dev, "%s: %s\n", + __func__, "Normal BCLK + Invert Frame"); + regmap_update_bits(sma1307->regmap, + SMA1307_01_INPUT_CTRL1, + SMA1307_LEFTPOL_MASK, + SMA1307_HIGH_FIRST_CH); + break; + case SND_SOC_DAIFMT_NB_NF: + dev_dbg(component->dev, "%s: %s\n", + __func__, "Normal BCLK + Normal Frame"); + break; + default: + dev_err(component->dev, + "%s: Unsupported Bit & Frameclock : 0x%x\n", + __func__, fmt); + return -EINVAL; + } + + return 0; +} + +static int sma1307_dai_set_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + dev_dbg(component->dev, "%s: slots = %d, slot_width - %d\n", + __func__, slots, slot_width); + + sma1307->frame_size = slot_width * slots; + + regmap_update_bits(sma1307->regmap, + SMA1307_A4_TOP_MAN3, + SMA1307_INTERFACE_MASK, SMA1307_TDM_FORMAT); + + regmap_update_bits(sma1307->regmap, + SMA1307_A5_TDM1, + SMA1307_TDM_TX_MODE_MASK, + SMA1307_TDM_TX_MONO); + + switch (slot_width) { + case 16: + regmap_update_bits(sma1307->regmap, + SMA1307_A6_TDM2, + SMA1307_TDM_DL_MASK, + SMA1307_TDM_DL_16); + break; + case 32: + regmap_update_bits(sma1307->regmap, + SMA1307_A6_TDM2, + SMA1307_TDM_DL_MASK, + SMA1307_TDM_DL_32); + break; + default: + dev_err(component->dev, "%s: not support TDM %d slot_width\n", + __func__, slot_width); + return -EINVAL; + } + + switch (slots) { + case 4: + regmap_update_bits(sma1307->regmap, + SMA1307_A6_TDM2, + SMA1307_TDM_N_SLOT_MASK, + SMA1307_TDM_N_SLOT_4); + break; + case 8: + regmap_update_bits(sma1307->regmap, + SMA1307_A6_TDM2, + SMA1307_TDM_N_SLOT_MASK, + SMA1307_TDM_N_SLOT_8); + break; + default: + dev_err(component->dev, "%s: not support TDM %d slots\n", + __func__, slots); + return -EINVAL; + } + + if (sma1307->tdm_slot0_rx < slots) + regmap_update_bits(sma1307->regmap, + SMA1307_A5_TDM1, + SMA1307_TDM_SLOT0_RX_POS_MASK, + sma1307->tdm_slot0_rx << 3); + else + dev_err(component->dev, "%s: Incorrect tdm-slot0-rx %d set\n", + __func__, sma1307->tdm_slot0_rx); + + if (sma1307->tdm_slot1_rx < slots) + regmap_update_bits(sma1307->regmap, + SMA1307_A5_TDM1, + SMA1307_TDM_SLOT1_RX_POS_MASK, + sma1307->tdm_slot1_rx); + else + dev_err(component->dev, "%s: Incorrect tdm-slot1-rx %d set\n", + __func__, sma1307->tdm_slot1_rx); + + if (sma1307->tdm_slot0_tx < slots) + regmap_update_bits(sma1307->regmap, + SMA1307_A6_TDM2, + SMA1307_TDM_SLOT0_TX_POS_MASK, + sma1307->tdm_slot0_tx << 3); + else + dev_err(component->dev, "%s: Incorrect tdm-slot0-tx %d set\n", + __func__, sma1307->tdm_slot0_tx); + + if (sma1307->tdm_slot1_tx < slots) + regmap_update_bits(sma1307->regmap, + SMA1307_A6_TDM2, + SMA1307_TDM_SLOT1_TX_POS_MASK, + sma1307->tdm_slot1_tx); + else + dev_err(component->dev, "%s: Incorrect tdm-slot1-tx %d set\n", + __func__, sma1307->tdm_slot1_tx); + + return 0; +} + +static int sma1307_dai_mute_stream(struct snd_soc_dai *dai, int mute, + int stream) +{ + struct snd_soc_component *component = dai->component; + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + + if (stream == SNDRV_PCM_STREAM_CAPTURE) + return 0; + if (mute) { + dev_dbg(component->dev, "%s: %s\n", __func__, "MUTE"); + regmap_update_bits(sma1307->regmap, + SMA1307_0E_MUTE_VOL_CTRL, + SMA1307_SPK_MUTE_MASK, + SMA1307_SPK_MUTE); + } else { + if (!sma1307->force_mute_status) { + dev_dbg(component->dev, "%s: %s\n", __func__, + "UNMUTE"); + regmap_update_bits(sma1307->regmap, + SMA1307_0E_MUTE_VOL_CTRL, + SMA1307_SPK_MUTE_MASK, + SMA1307_SPK_UNMUTE); + } else { + dev_dbg(sma1307->dev, "%s: FORCE MUTE!!!\n", __func__); + } + } + + return 0; +} + +static const struct snd_soc_dai_ops sma1307_dai_ops_amp = { + .hw_params = sma1307_dai_hw_params_amp, + .set_fmt = sma1307_dai_set_fmt_amp, + .set_sysclk = sma1307_dai_set_sysclk_amp, + .set_tdm_slot = sma1307_dai_set_tdm_slot, + .mute_stream = sma1307_dai_mute_stream, +}; + +#define SMA1307_RATES_PLAYBACK SNDRV_PCM_RATE_8000_96000 +#define SMA1307_RATES_CAPTURE SNDRV_PCM_RATE_8000_48000 +#define SMA1307_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver sma1307_dai[] = { + { + .name = "sma1307-amplifier", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = SMA1307_RATES_PLAYBACK, + .formats = SMA1307_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SMA1307_RATES_CAPTURE, + .formats = SMA1307_FORMATS, + }, + .ops = &sma1307_dai_ops_amp, + }, +}; + +static void sma1307_check_fault_worker(struct work_struct *work) +{ + struct sma1307_priv *sma1307 = + container_of(work, struct sma1307_priv, check_fault_work.work); + unsigned int status1_val, status2_val; + char *envp[3] = { NULL, NULL, NULL }; + + if (sma1307->tsdw_cnt) + regmap_read(sma1307->regmap, + SMA1307_0A_SPK_VOL, &sma1307->cur_vol); + else + regmap_read(sma1307->regmap, + SMA1307_0A_SPK_VOL, &sma1307->init_vol); + + regmap_read(sma1307->regmap, SMA1307_FA_STATUS1, &status1_val); + regmap_read(sma1307->regmap, SMA1307_FB_STATUS2, &status2_val); + + if (~status1_val & SMA1307_OT1_OK_STATUS) { + dev_crit(sma1307->dev, + "%s: OT1(Over Temperature Level 1)\n", __func__); + envp[0] = kasprintf(GFP_KERNEL, "STATUS=OT1"); + if (sma1307->sw_ot1_prot) { + /* Volume control (Current Volume -3dB) */ + if ((sma1307->cur_vol + 6) <= 0xFA) { + sma1307->cur_vol += 6; + regmap_write(sma1307->regmap, + SMA1307_0A_SPK_VOL, + sma1307->cur_vol); + envp[1] = kasprintf(GFP_KERNEL, + "VOLUME=0x%02X", sma1307->cur_vol); + } + } + sma1307->tsdw_cnt++; + } else if (sma1307->tsdw_cnt) { + regmap_write(sma1307->regmap, + SMA1307_0A_SPK_VOL, sma1307->init_vol); + sma1307->tsdw_cnt = 0; + sma1307->cur_vol = sma1307->init_vol; + envp[0] = kasprintf(GFP_KERNEL, "STATUS=OT1_CLEAR"); + envp[1] = kasprintf(GFP_KERNEL, + "VOLUME=0x%02X", sma1307->cur_vol); + } + + if (~status1_val & SMA1307_OT2_OK_STATUS) { + dev_crit(sma1307->dev, + "%s: OT2(Over Temperature Level 2)\n", __func__); + envp[0] = kasprintf(GFP_KERNEL, "STATUS=OT2"); + } + if (status1_val & SMA1307_UVLO_STATUS) { + dev_crit(sma1307->dev, + "%s: UVLO(Under Voltage Lock Out)\n", __func__); + envp[0] = kasprintf(GFP_KERNEL, "STATUS=UVLO"); + } + if (status1_val & SMA1307_OVP_BST_STATUS) { + dev_crit(sma1307->dev, + "%s: OVP_BST(Over Voltage Protection)\n", __func__); + envp[0] = kasprintf(GFP_KERNEL, "STATUS=OVP_BST"); + } + if (status2_val & SMA1307_OCP_SPK_STATUS) { + dev_crit(sma1307->dev, + "%s: OCP_SPK(Over Current Protect SPK)\n", __func__); + envp[0] = kasprintf(GFP_KERNEL, "STATUS=OCP_SPK"); + } + if (status2_val & SMA1307_OCP_BST_STATUS) { + dev_crit(sma1307->dev, + "%s: OCP_BST(Over Current Protect Boost)\n", __func__); + envp[0] = kasprintf(GFP_KERNEL, "STATUS=OCP_BST"); + } + if (status2_val & SMA1307_CLK_MON_STATUS) { + dev_crit(sma1307->dev, + "%s: CLK_FAULT(No clock input)\n", __func__); + envp[0] = kasprintf(GFP_KERNEL, "STATUS=CLK_FAULT"); + } + + if (envp[0] != NULL) { + if (kobject_uevent_env(sma1307->kobj, KOBJ_CHANGE, envp)) + dev_err(sma1307->dev, + "%s: Error sending uevent\n", __func__); + kfree(envp[0]); + kfree(envp[1]); + } + + if (sma1307->check_fault_status) { + if (sma1307->check_fault_period > 0) + queue_delayed_work(system_freezable_wq, + &sma1307->check_fault_work, + sma1307->check_fault_period * HZ); + else + queue_delayed_work(system_freezable_wq, + &sma1307->check_fault_work, + CHECK_PERIOD_TIME * HZ); + } +} + +static void sma1307_setting_loaded(struct sma1307_priv *sma1307, const char *file) +{ + const struct firmware *fw; + int *data, size, offset, num_mode; + + request_firmware(&fw, file, sma1307->dev); + + if (!fw) { + dev_err(sma1307->dev, "%s: failed to read \"%s\"\n", + __func__, setting_file); + release_firmware(fw); + sma1307->set.status = false; + return; + } else if ((fw->size) < SMA1307_SETTING_HEADER_SIZE) { + dev_err(sma1307->dev, "%s: Invalid file\n", __func__); + release_firmware(fw); + sma1307->set.status = false; + return; + } + + data = kzalloc(fw->size, GFP_KERNEL); + size = fw->size >> 2; + memcpy(data, fw->data, fw->size); + + release_firmware(fw); + + /* HEADER */ + sma1307->set.header_size = SMA1307_SETTING_HEADER_SIZE; + sma1307->set.checksum = data[sma1307->set.header_size - 2]; + sma1307->set.num_mode = data[sma1307->set.header_size - 1]; + num_mode = sma1307->set.num_mode; + sma1307->set.header = devm_kzalloc(sma1307->dev, + sma1307->set.header_size, + GFP_KERNEL); + memcpy(sma1307->set.header, data, + sma1307->set.header_size * sizeof(int)); + + if ((sma1307->set.checksum >> 8) != SMA1307_SETTING_CHECKSUM) { + dev_err(sma1307->dev, "%s: failed by dismatch \"%s\"\n", + __func__, setting_file); + sma1307->set.status = false; + return; + } + + /* DEFAULT */ + sma1307->set.def_size = SMA1307_SETTING_DEFAULT_SIZE; + sma1307->set.def + = devm_kzalloc(sma1307->dev, + sma1307->set.def_size * sizeof(int), GFP_KERNEL); + memcpy(sma1307->set.def, + &data[sma1307->set.header_size], + sma1307->set.def_size * sizeof(int)); + + /* MODE */ + offset = sma1307->set.header_size + sma1307->set.def_size; + sma1307->set.mode_size = DIV_ROUND_CLOSEST(size - offset, num_mode + 1); + for (int i = 0; i < num_mode; i++) { + sma1307->set.mode_set[i] + = devm_kzalloc(sma1307->dev, + sma1307->set.mode_size * 2 * sizeof(int), + GFP_KERNEL); + for (int j = 0; j < sma1307->set.mode_size; j++) { + sma1307->set.mode_set[i][2 * j] + = data[offset + ((num_mode + 1) * j)]; + sma1307->set.mode_set[i][2 * j + 1] + = data[offset + ((num_mode + 1) * j + i + 1)]; + } + } + + kfree(data); + sma1307->set.status = true; + +} + +static void sma1307_reset(struct snd_soc_component *component) +{ + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + unsigned int status = 0; + + regmap_read(sma1307->regmap, SMA1307_FF_DEVICE_INDEX, &status); + + sma1307->rev_num = status & SMA1307_REV_NUM_STATUS; + dev_dbg(component->dev, "%s: SMA1307 Revision %d\n", + __func__, sma1307->rev_num); + regmap_read(sma1307->regmap, SMA1307_99_OTP_TRM2, &sma1307->otp_trm2); + regmap_read(sma1307->regmap, SMA1307_9A_OTP_TRM3, &sma1307->otp_trm3); + + if ((sma1307->otp_trm2 & SMA1307_OTP_STAT_MASK) != SMA1307_OTP_STAT_1) + dev_warn(component->dev, "%s: SMA1307 OTP Status Fail\n", + __func__); + + /* Register Initial Value Setting */ + sma1307_setting_loaded(sma1307, setting_file); + if (sma1307->set.status) + sma1307_set_binary(component); + else + sma1307_set_default(component); + + regmap_update_bits(sma1307->regmap, + SMA1307_93_INT_CTRL, + SMA1307_DIS_INT_MASK, SMA1307_HIGH_Z_INT); + regmap_write(sma1307->regmap, SMA1307_0A_SPK_VOL, sma1307->init_vol); +} + +static void sma1307_set_binary(struct snd_soc_component *component) +{ + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + int i = 0, mode = 0; + + for (i = 0; i < (sma1307->set.def_size); i++) { + if (sma1307_writeable_register(sma1307->dev, i) + && ((i < SMA1307_97_OTP_TRM0) + || (i > SMA1307_9A_OTP_TRM3))) { + regmap_write(sma1307->regmap, i, sma1307->set.def[i]); + + } + } + for (i = 0; i < (sma1307->set.mode_size); i++) { + if (sma1307_writeable_register(sma1307->dev, i) + && ((i < SMA1307_97_OTP_TRM0) + || (i > SMA1307_9A_OTP_TRM3))) { + mode = sma1307->binary_mode; + regmap_write(sma1307->regmap, + sma1307->set.mode_set[mode][2 * i], + sma1307->set.mode_set[mode][2 * i + + 1]); + } + } +} + +static void sma1307_set_default(struct snd_soc_component *component) +{ + struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component); + int i = 0; + + for (i = 0; i < (unsigned int)ARRAY_SIZE(sma1307_reg_def); i++) + regmap_write(sma1307->regmap, + sma1307_reg_def[i].reg, + sma1307_reg_def[i].def); + + if (!strcmp(sma1307->name, DEVICE_NAME_SMA1307AQ)) + sma1307->data->init(sma1307->regmap); +} + +static int sma1307_probe(struct snd_soc_component *component) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_component_get_dapm(component); + + snd_soc_dapm_sync(dapm); + + sma1307_amp_component = component; + + snd_soc_add_component_controls(component, sma1307_binary_mode_control, + ARRAY_SIZE(sma1307_binary_mode_control)); + sma1307_reset(component); + + return 0; +} + +static const struct snd_soc_component_driver sma1307_component = { + .probe = sma1307_probe, + .controls = sma1307_snd_controls, + .num_controls = ARRAY_SIZE(sma1307_snd_controls), + .dapm_widgets = sma1307_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(sma1307_dapm_widgets), + .dapm_routes = sma1307_audio_map, + .num_dapm_routes = ARRAY_SIZE(sma1307_audio_map), +}; + +static const struct regmap_config sma_i2c_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = SMA1307_FF_DEVICE_INDEX, + .readable_reg = sma1307_readable_register, + .writeable_reg = sma1307_writeable_register, + .volatile_reg = sma1307_volatile_register, + + .reg_defaults = sma1307_reg_def, + .num_reg_defaults = ARRAY_SIZE(sma1307_reg_def), +}; + +static void sma1307aq_init(struct regmap *regmap) +{ + /* Guidelines for driving 4ohm load */ + /* Brown Out Protection */ + regmap_write(regmap, SMA1307_02_BROWN_OUT_PROT1, 0x62); + regmap_write(regmap, SMA1307_03_BROWN_OUT_PROT2, 0x5D); + regmap_write(regmap, SMA1307_04_BROWN_OUT_PROT3, 0x57); + regmap_write(regmap, SMA1307_05_BROWN_OUT_PROT8, 0x54); + regmap_write(regmap, SMA1307_06_BROWN_OUT_PROT9, 0x51); + regmap_write(regmap, + SMA1307_07_BROWN_OUT_PROT10, 0x4D); + regmap_write(regmap, + SMA1307_08_BROWN_OUT_PROT11, 0x4B); + regmap_write(regmap, SMA1307_27_BROWN_OUT_PROT4, 0x3C); + regmap_write(regmap, SMA1307_28_BROWN_OUT_PROT5, 0x5B); + regmap_write(regmap, + SMA1307_29_BROWN_OUT_PROT12, 0x78); + regmap_write(regmap, + SMA1307_2A_BROWN_OUT_PROT13, 0x96); + regmap_write(regmap, + SMA1307_2B_BROWN_OUT_PROT14, 0xB4); + regmap_write(regmap, + SMA1307_2C_BROWN_OUT_PROT15, 0xD3); + /* FDPEC Gain */ + regmap_write(regmap, SMA1307_35_FDPEC_CTRL0, 0x16); + /* FLT Vdd */ + regmap_write(regmap, SMA1307_92_FDPEC_CTRL1, 0xA0); + /* Boost Max */ + regmap_write(regmap, SMA1307_AB_BOOST_CTRL4, 0x0F); +} + +static const struct sma1307_data sma1307aq_data = { + .name = DEVICE_NAME_SMA1307AQ, + .init = sma1307aq_init, +}; + +static int sma1307_i2c_probe(struct i2c_client *client) +{ + struct sma1307_priv *sma1307; + const struct sma1307_data *data; + int ret = 0; + unsigned int device_info; + + sma1307 = devm_kzalloc(&client->dev, + sizeof(*sma1307), GFP_KERNEL); + if (!sma1307) + return -ENOMEM; + + sma1307->regmap = devm_regmap_init_i2c(client, &sma_i2c_regmap); + if (IS_ERR(sma1307->regmap)) { + return dev_err_probe(&client->dev, PTR_ERR(sma1307->regmap), + "%s: failed to allocate register map\n", __func__); + } + + data = device_get_match_data(&client->dev); + if (!data) + return -ENODEV; + + sma1307->data = data; + + /* set initial value as normal AMP IC status */ + sma1307->name = client->name; + sma1307->format = SND_SOC_DAIFMT_I2S; + sma1307->sys_clk_id = SMA1307_PLL_CLKIN_BCLK; + sma1307->num_of_pll_matches = ARRAY_SIZE(sma1307_pll_matches); + + sma1307->check_fault_period = CHECK_PERIOD_TIME; + sma1307->check_fault_status = true; + sma1307->init_vol = 0x32; + sma1307->cur_vol = sma1307->init_vol; + sma1307->sw_ot1_prot = true; + + mutex_init(&sma1307->default_lock); + + INIT_DELAYED_WORK(&sma1307->check_fault_work, + sma1307_check_fault_worker); + + sma1307->dev = &client->dev; + sma1307->kobj = &client->dev.kobj; + + i2c_set_clientdata(client, sma1307); + + sma1307->pll_matches = sma1307_pll_matches; + + regmap_read(sma1307->regmap, + SMA1307_FF_DEVICE_INDEX, &device_info); + + if ((device_info & 0xF8) != SMA1307_DEVICE_ID) { + dev_err(&client->dev, + "%s: device initialization error (0x%02X)", + __func__, device_info); + return -ENODEV; + } + dev_dbg(&client->dev, "%s: chip version 0x%02X\n", + __func__, device_info); + + i2c_set_clientdata(client, sma1307); + + ret = devm_snd_soc_register_component(&client->dev, + &sma1307_component, sma1307_dai, + 1); + + if (ret) { + dev_err(&client->dev, "%s: failed to register component\n", + __func__); + + return ret; + } + + return ret; +} + +static void sma1307_i2c_remove(struct i2c_client *client) +{ + struct sma1307_priv *sma1307 = + (struct sma1307_priv *)i2c_get_clientdata(client); + + cancel_delayed_work_sync(&sma1307->check_fault_work); +} + +static const struct i2c_device_id sma1307_i2c_id[] = { + { "sma1307a", 0 }, + { "sma1307aq", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, sma1307_i2c_id); + +static const struct of_device_id sma1307_of_match[] = { + { + .compatible = "irondevice,sma1307a", + }, + { + .compatible = "irondevice,sma1307aq", + .data = &sma1307aq_data //AEC-Q100 Qualificated + }, + { } +}; + +MODULE_DEVICE_TABLE(of, sma1307_of_match); + +static struct i2c_driver sma1307_i2c_driver = { + .driver = { + .name = "sma1307", + .of_match_table = sma1307_of_match, + }, + .probe = sma1307_i2c_probe, + .remove = sma1307_i2c_remove, + .id_table = sma1307_i2c_id, +}; + +module_i2c_driver(sma1307_i2c_driver); + +MODULE_DESCRIPTION("ALSA SoC SMA1307 driver"); +MODULE_AUTHOR("Gyuhwa Park, <gyuhwa.park(a)irondevice.com>"); +MODULE_AUTHOR("KS Jo, <kiseok.jo(a)irondevice.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/sma1307.h b/sound/soc/codecs/sma1307.h new file mode 100644 index 000000000..44aab52a3 --- /dev/null +++ b/sound/soc/codecs/sma1307.h @@ -0,0 +1,444 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later + * sma1307.h -- sma1307 ALSA SoC Audio driver + * + * Copyright 2024 Iron Device Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _SMA1307_H +#define _SMA1307_H + +#include <sound/soc.h> + +enum sma1307_fault { + SMA1307_FAULT_OT1, + SMA1307_FAULT_OT2, + SMA1307_FAULT_UVLO, + SMA1307_FAULT_OVP_BST, + SMA1307_FAULT_OCP_SPK, + SMA1307_FAULT_OCP_BST, + SMA1307_FAULT_CLK +}; + +enum sma1307_mode { + SMA1307_MONO_MODE, + SMA1307_LEFT_MODE, + SMA1307_RIGHT_MODE, +}; + +enum sma1307_sdo_mode { + SMA1307_OUT_DATA_ONE_48K, + SMA1307_OUT_DATA_TWO_48K, + SMA1307_OUT_DATA_TWO_24K, + SMA1307_OUT_CLK_PLL, + SMA1307_OUT_CLK_OSC +}; + +enum sma1307_sdo_source { + SMA1307_OUT_DISABLE, + SMA1307_OUT_FORMAT_C, + SMA1307_OUT_MIXER_OUT, + SMA1307_OUT_AFTER_DSP, + SMA1307_OUT_VRMS2_AVG, + SMA1307_OUT_BATTERY, + SMA1307_OUT_TEMP, + SMA1307_OUT_AFTER_DELAY +}; + +struct sma1307_setting_file { + bool status; + char *header; + int *def; + int *mode_set[5]; + int checksum; + int num_mode; + size_t header_size; + size_t def_size; + size_t mode_size; +}; + +#define SMA1307_I2C_ADDR_00 0x1e +#define SMA1307_I2C_ADDR_01 0x3e +#define SMA1307_I2C_ADDR_10 0x5e +#define SMA1307_I2C_ADDR_11 0x7e + +#define DEVICE_NAME_SMA1307A "sma1307a" +#define DEVICE_NAME_SMA1307AQ "sma1307aq" + +#define SMA1307_EXTERNAL_CLOCK_19_2 0x00 +#define SMA1307_EXTERNAL_CLOCK_24_576 0x01 +#define SMA1307_PLL_CLKIN_MCLK 0x02 +#define SMA1307_PLL_CLKIN_BCLK 0x03 + +#define SMA1307_OFFSET_DEFAULT_MODE 0x00 +#define SMA1307_OFFSET_BURNING_MODE 0x01 + +#define SMA1307_SETTING_HEADER_SIZE 0x08 +#define SMA1307_SETTING_DEFAULT_SIZE 0xC0 + +#define SMA1307_DEFAULT_SET 0x00 +#define SMA1307_BINARY_FILE_SET 0x01 + +/* Controls Name */ +#define SMA1307_REG_CTRL_NAME "Register Byte Control" +#define SMA1307_VOL_CTRL_NAME "Speaker Volume" +#define SMA1307_FORCE_MUTE_CTRL_NAME "Force Mute Switch" +#define SMA1307_TDM_RX0_POS_NAME "TDM RX Slot0 Position" +#define SMA1307_TDM_RX1_POS_NAME "TDM RX Slot1 Position" +#define SMA1307_TDM_TX0_POS_NAME "TDM TX Slot0 Position" +#define SMA1307_TDM_TX1_POS_NAME "TDM TX Slot1 Position" +#define SMA1307_OT1_SW_PROT_CTRL_NAME "OT1 SW Protection Switch" +#define SMA1307_RESET_CTRL_NAME "Reset Switch" +#define SMA1307_CHECK_FAULT_STATUS_NAME "Check Fault Status" +#define SMA1307_CHECK_FAULT_PERIOD_NAME "Check Fault Period" + +/* DAPM Name */ +#define SMA1307_AIF_IN_NAME "AIF IN Source" +#define SMA1307_AIF_OUT0_NAME "AIF OUT0 Source" +#define SMA1307_AIF_OUT1_NAME "AIF OUT1 Source" + +/* + * SMA1307 Register Definition + */ + +/* SMA1307 Register Addresses */ +#define SMA1307_00_SYSTEM_CTRL 0x00 +#define SMA1307_01_INPUT_CTRL1 0x01 +#define SMA1307_02_BROWN_OUT_PROT1 0x02 +#define SMA1307_03_BROWN_OUT_PROT2 0x03 +#define SMA1307_04_BROWN_OUT_PROT3 0x04 +#define SMA1307_05_BROWN_OUT_PROT8 0x05 +#define SMA1307_06_BROWN_OUT_PROT9 0x06 +#define SMA1307_07_BROWN_OUT_PROT10 0x07 +#define SMA1307_08_BROWN_OUT_PROT11 0x08 +#define SMA1307_09_OUTPUT_CTRL 0x09 +#define SMA1307_0A_SPK_VOL 0x0A +#define SMA1307_0B_BST_TEST 0x0B +#define SMA1307_0C_BOOST_CTRL8 0x0C +#define SMA1307_0D_SPK_TEST 0x0D +#define SMA1307_0E_MUTE_VOL_CTRL 0x0E +#define SMA1307_0F_VBAT_TEMP_SENSING 0x0F + +#define SMA1307_10_SYSTEM_CTRL1 0x10 +#define SMA1307_11_SYSTEM_CTRL2 0x11 +#define SMA1307_12_SYSTEM_CTRL3 0x12 +#define SMA1307_13_DELAY 0x13 +#define SMA1307_14_MODULATOR 0x14 +#define SMA1307_15_BASS_SPK1 0x15 +#define SMA1307_16_BASS_SPK2 0x16 +#define SMA1307_17_BASS_SPK3 0x17 +#define SMA1307_18_BASS_SPK4 0x18 +#define SMA1307_19_BASS_SPK5 0x19 +#define SMA1307_1A_BASS_SPK6 0x1A +#define SMA1307_1B_BASS_SPK7 0x1B +#define SMA1307_1C_BROWN_OUT_PROT20 0x1C +#define SMA1307_1D_BROWN_OUT_PROT0 0x1D +#define SMA1307_1E_TONE_GENERATOR 0x1E +#define SMA1307_1F_TONE_FINE_VOLUME 0x1F + +#define SMA1307_22_COMP_HYS_SEL 0x22 +#define SMA1307_23_COMPLIM1 0x23 +#define SMA1307_24_COMPLIM2 0x24 +#define SMA1307_25_COMPLIM3 0x25 +#define SMA1307_26_COMPLIM4 0x26 +#define SMA1307_27_BROWN_OUT_PROT4 0x27 +#define SMA1307_28_BROWN_OUT_PROT5 0x28 +#define SMA1307_29_BROWN_OUT_PROT12 0x29 +#define SMA1307_2A_BROWN_OUT_PROT13 0x2A +#define SMA1307_2B_BROWN_OUT_PROT14 0x2B +#define SMA1307_2C_BROWN_OUT_PROT15 0x2C +#define SMA1307_2D_BROWN_OUT_PROT6 0x2D +#define SMA1307_2E_BROWN_OUT_PROT7 0x2E +#define SMA1307_2F_BROWN_OUT_PROT16 0x2F + +#define SMA1307_30_BROWN_OUT_PROT17 0x30 +#define SMA1307_31_BROWN_OUT_PROT18 0x31 +#define SMA1307_32_BROWN_OUT_PROT19 0x32 +#define SMA1307_34_OCP_SPK 0x34 +#define SMA1307_35_FDPEC_CTRL0 0x35 +#define SMA1307_36_PROTECTION 0x36 +#define SMA1307_37_SLOPECTRL 0x37 +#define SMA1307_38_POWER_METER 0x38 +#define SMA1307_39_PMT_NZ_VAL 0x39 +#define SMA1307_3B_TEST1 0x3B +#define SMA1307_3C_TEST2 0x3C +#define SMA1307_3D_TEST3 0x3D +#define SMA1307_3E_IDLE_MODE_CTRL 0x3E +#define SMA1307_3F_ATEST2 0x3F +#define SMA1307_8B_PLL_POST_N 0x8B +#define SMA1307_8C_PLL_N 0x8C +#define SMA1307_8D_PLL_A_SETTING 0x8D +#define SMA1307_8E_PLL_P_CP 0x8E +#define SMA1307_8F_ANALOG_TEST 0x8F + +#define SMA1307_90_CRESTLIM1 0x90 +#define SMA1307_91_CRESTLIM2 0x91 +#define SMA1307_92_FDPEC_CTRL1 0x92 +#define SMA1307_93_INT_CTRL 0x93 +#define SMA1307_94_BOOST_CTRL9 0x94 +#define SMA1307_95_BOOST_CTRL10 0x95 +#define SMA1307_96_BOOST_CTRL11 0x96 +#define SMA1307_97_OTP_TRM0 0x97 +#define SMA1307_98_OTP_TRM1 0x98 +#define SMA1307_99_OTP_TRM2 0x99 +#define SMA1307_9A_OTP_TRM3 0x9A + +#define SMA1307_A0_PAD_CTRL0 0xA0 +#define SMA1307_A1_PAD_CTRL1 0xA1 +#define SMA1307_A2_TOP_MAN1 0xA2 +#define SMA1307_A3_TOP_MAN2 0xA3 +#define SMA1307_A4_TOP_MAN3 0xA4 +#define SMA1307_A5_TDM1 0xA5 +#define SMA1307_A6_TDM2 0xA6 +#define SMA1307_A7_CLK_MON 0xA7 +#define SMA1307_A8_BOOST_CTRL1 0xA8 +#define SMA1307_A9_BOOST_CTRL2 0xA9 +#define SMA1307_AA_BOOST_CTRL3 0xAA +#define SMA1307_AB_BOOST_CTRL4 0xAB +#define SMA1307_AC_BOOST_CTRL5 0xAC +#define SMA1307_AD_BOOST_CTRL6 0xAD +#define SMA1307_AE_BOOST_CTRL7 0xAE +#define SMA1307_AF_LPF 0xAF + +#define SMA1307_B0_RMS_TC1 0xB0 +#define SMA1307_B1_RMS_TC2 0xB1 +#define SMA1307_B2_AVG_TC1 0xB2 +#define SMA1307_B3_AVG_TC2 0xB3 +#define SMA1307_B4_PRVALUE1 0xB4 +#define SMA1307_B5_PRVALUE2 0xB5 +#define SMA1307_B8_SPK_NG_CTRL1 0xB8 +#define SMA1307_B9_SPK_NG_CTRL2 0xB9 +#define SMA1307_BA_DGC1 0xBA +#define SMA1307_BB_DGC2 0xBB +#define SMA1307_BC_DGC3 0xBC +#define SMA1307_BD_MCBS_CTRL1 0xBD +#define SMA1307_BE_MCBS_CTRL2 0xBE + +/* Status Register Read Only */ +#define SMA1307_F5_READY_FOR_V_SAR 0xF5 +#define SMA1307_F7_READY_FOR_T_SAR 0xF7 +#define SMA1307_F8_STATUS_T1 0xF8 +#define SMA1307_F9_STATUS_T2 0xF9 +#define SMA1307_FA_STATUS1 0xFA +#define SMA1307_FB_STATUS2 0xFB +#define SMA1307_FC_STATUS3 0xFC +#define SMA1307_FD_STATUS4 0xFD +#define SMA1307_FE_STATUS5 0xFE +#define SMA1307_FF_DEVICE_INDEX 0xFF + +/* SMA1307 Registers Bit Fields */ +/* Power On/Off */ +#define SMA1307_POWER_MASK BIT(0) +#define SMA1307_POWER_OFF 0 +#define SMA1307_POWER_ON BIT(0) + +/* Reset */ +#define SMA1307_RESET_MASK BIT(1) +#define SMA1307_RESET_ON BIT(1) + +/* Left Polarity */ +#define SMA1307_LEFTPOL_MASK BIT(3) +#define SMA1307_LOW_FIRST_CH 0 +#define SMA1307_HIGH_FIRST_CH BIT(3) + +/* SCK Falling/Rising */ +#define SMA1307_SCK_RISING_MASK BIT(2) +#define SMA1307_SCK_FALLING_EDGE 0 +#define SMA1307_SCK_RISING_EDGE BIT(2) + +/* SPK Mute */ +#define SMA1307_SPK_MUTE_MASK BIT(0) +#define SMA1307_SPK_UNMUTE 0 +#define SMA1307_SPK_MUTE BIT(0) + +/* SPK Mode */ +#define SMA1307_SPK_MODE_MASK (BIT(2)|BIT(3)|BIT(4)) +#define SMA1307_SPK_OFF 0 +#define SMA1307_SPK_MONO BIT(2) +#define SMA1307_SPK_STEREO BIT(4) + +/* Mono Mix */ +#define SMA1307_MONOMIX_MASK BIT(0) +#define SMA1307_MONOMIX_OFF 0 +#define SMA1307_MONOMIX_ON BIT(0) + +/* LR Data Swap */ +#define SMA1307_LR_DATA_SW_MASK BIT(4) +#define SMA1307_LR_DATA_SW_NORMAL 0 +#define SMA1307_LR_DATA_SW_SWAP BIT(4) + +/* PLL On/Off */ +#define SMA1307_PLL_MASK BIT(6) +#define SMA1307_PLL_ON 0 +#define SMA1307_PLL_OFF BIT(6) + +/* Input Format */ +#define SMA1307_I2S_MODE_MASK (BIT(4)|BIT(5)|BIT(6)) +#define SMA1307_STANDARD_I2S 0 +#define SMA1307_LJ BIT(4) +#define SMA1307_RJ_16BIT BIT(6) +#define SMA1307_RJ_18BIT (BIT(4)|BIT(6)) +#define SMA1307_RJ_20BIT (BIT(5)|BIT(6)) +#define SMA1307_RJ_24BIT (BIT(4)|BIT(5)|BIT(6)) + +/* Controller / Device Setting */ +#define SMA1307_CONTROLLER_DEVICE_MASK BIT(7) +#define SMA1307_DEVICE_MODE 0 +#define SMA1307_CONTROLLER_MODE BIT(7) + +/* Port Config */ +#define SMA1307_PORT_CONFIG_MASK (BIT(6)|BIT(7)) +#define SMA1307_INPUT_PORT_ONLY 0 +#define SMA1307_OUTPUT_PORT_ENABLE BIT(7) + +/* SDO Output */ +#define SMA1307_SDO_OUTPUT_MASK BIT(3) +#define SMA1307_LOGIC_OUTPUT 0 +#define SMA1307_HIGH_Z_OUTPUT BIT(3) + +#define SMA1307_DATA_CLK_SEL_MASK (BIT(6)|BIT(7)) +#define SMA1307_SDO_DATA 0 +#define SMA1307_SDO_CLK_PLL BIT(6) +#define SMA1307_SDO_CLK_OSC (BIT(6)|BIT(7)) + +/* SDO Output2 */ +#define SMA1307_SDO_OUTPUT2_MASK BIT(0) +#define SMA1307_ONE_SDO_PER_CH 0 +#define SMA1307_TWO_SDO_PER_CH BIT(0) + +/* SDO Output3 */ +#define SMA1307_SDO_OUTPUT3_MASK BIT(2) +#define SMA1307_SDO_OUTPUT3_DIS 0 +#define SMA1307_TWO_SDO_PER_CH_24K BIT(2) + +/* SDO OUT1 Select*/ +#define SMA1307_SDO_OUT1_SEL_MASK (BIT(3)|BIT(4)|BIT(5)) +#define SMA1307_SDO1_DISABLE 0 +#define SMA1307_SDO1_FORMAT_C BIT(3) +#define SMA1307_SDO1_MONO_MIX BIT(4) +#define SMA1307_SDO1_AFTER_DSP (BIT(3)|BIT(4)) +#define SMA1307_SDO1_VRMS2_AVG BIT(5) +#define SMA1307_SDO1_VBAT_MON (BIT(3)|BIT(5)) +#define SMA1307_SDO1_TEMP_MON (BIT(4)|BIT(5)) +#define SMA1307_SDO1_AFTER_DELAY (BIT(3)|BIT(4)|BIT(5)) + +/* SDO OUT0 Select*/ +#define SMA1307_SDO_OUT0_SEL_MASK (BIT(0)|BIT(1)|BIT(2)) +#define SMA1307_SDO0_DISABLE 0 +#define SMA1307_SDO0_FORMAT_C BIT(0) +#define SMA1307_SDO0_MONO_MIX BIT(1) +#define SMA1307_SDO0_AFTER_DSP (BIT(0)|BIT(1)) +#define SMA1307_SDO0_VRMS2_AVG BIT(2) +#define SMA1307_SDO0_VBAT_MON (BIT(0)|BIT(2)) +#define SMA1307_SDO0_TEMP_MON (BIT(1)|BIT(2)) +#define SMA1307_SDO0_AFTER_DELAY (BIT(0)|BIT(1)|BIT(2)) + +/* INTERRUPT Operation */ +#define SMA1307_SEL_INT_MASK BIT(2) +#define SMA1307_INT_CLEAR_AUTO 0 +#define SMA1307_INT_CLEAR_MANUAL BIT(2) + +/* INTERRUPT CLEAR */ +#define SMA1307_CLR_INT_MASK BIT(1) +#define SMA1307_INT_READY 0 +#define SMA1307_INT_CLEAR BIT(1) + +/* INTERRUPT Disable */ +#define SMA1307_DIS_INT_MASK BIT(0) +#define SMA1307_NORMAL_INT 0 +#define SMA1307_HIGH_Z_INT BIT(0) + +/* Interface Control */ +#define SMA1307_INTERFACE_MASK (BIT(5)|BIT(6)|BIT(7)) +#define SMA1307_LJ_FORMAT BIT(5) +#define SMA1307_I2S_FORMAT (BIT(5)|BIT(6)) +#define SMA1307_TDM_FORMAT BIT(7) + +#define SMA1307_SCK_RATE_MASK (BIT(3)|BIT(4)) +#define SMA1307_SCK_64FS 0 +#define SMA1307_SCK_32FS BIT(4) + +#define SMA1307_DATA_WIDTH_MASK (BIT(1)|BIT(2)) +#define SMA1307_DATA_24BIT 0 +#define SMA1307_DATA_16BIT (BIT(1)|BIT(2)) + +#define SMA1307_TDM_TX_MODE_MASK BIT(6) +#define SMA1307_TDM_TX_MONO 0 +#define SMA1307_TDM_TX_STEREO BIT(6) + +#define SMA1307_TDM_SLOT0_RX_POS_MASK (BIT(3)|BIT(4)|BIT(5)) +#define SMA1307_TDM_SLOT0_RX_POS_0 0 +#define SMA1307_TDM_SLOT0_RX_POS_1 BIT(3) +#define SMA1307_TDM_SLOT0_RX_POS_2 BIT(4) +#define SMA1307_TDM_SLOT0_RX_POS_3 (BIT(3)|BIT(4)) +#define SMA1307_TDM_SLOT0_RX_POS_4 BIT(5) +#define SMA1307_TDM_SLOT0_RX_POS_5 (BIT(3)|BIT(5)) +#define SMA1307_TDM_SLOT0_RX_POS_6 (BIT(4)|BIT(5)) +#define SMA1307_TDM_SLOT0_RX_POS_7 (BIT(3)|BIT(4)|BIT(5)) + +#define SMA1307_TDM_SLOT1_RX_POS_MASK (BIT(0)|BIT(1)|BIT(2)) +#define SMA1307_TDM_SLOT1_RX_POS_0 0 +#define SMA1307_TDM_SLOT1_RX_POS_1 BIT(0) +#define SMA1307_TDM_SLOT1_RX_POS_2 BIT(1) +#define SMA1307_TDM_SLOT1_RX_POS_3 (BIT(0)|BIT(1)) +#define SMA1307_TDM_SLOT1_RX_POS_4 BIT(2) +#define SMA1307_TDM_SLOT1_RX_POS_5 (BIT(0)|BIT(2)) +#define SMA1307_TDM_SLOT1_RX_POS_6 (BIT(1)|BIT(2)) +#define SMA1307_TDM_SLOT1_RX_POS_7 (BIT(0)|BIT(1)|BIT(2)) + +/* TDM2 FORMAT : 0xA6 */ +#define SMA1307_TDM_DL_MASK BIT(7) +#define SMA1307_TDM_DL_16 0 +#define SMA1307_TDM_DL_32 BIT(7) + +#define SMA1307_TDM_N_SLOT_MASK BIT(6) +#define SMA1307_TDM_N_SLOT_4 0 +#define SMA1307_TDM_N_SLOT_8 BIT(6) + +#define SMA1307_TDM_SLOT0_TX_POS_MASK (BIT(3)|BIT(4)|BIT(5)) +#define SMA1307_TDM_SLOT0_TX_POS_0 0 +#define SMA1307_TDM_SLOT0_TX_POS_1 BIT(3) +#define SMA1307_TDM_SLOT0_TX_POS_2 BIT(4) +#define SMA1307_TDM_SLOT0_TX_POS_3 (BIT(3)|BIT(4)) +#define SMA1307_TDM_SLOT0_TX_POS_4 BIT(5) +#define SMA1307_TDM_SLOT0_TX_POS_5 (BIT(3)|BIT(5)) +#define SMA1307_TDM_SLOT0_TX_POS_6 (BIT(4)|BIT(5)) +#define SMA1307_TDM_SLOT0_TX_POS_7 (BIT(3)|BIT(4)|BIT(5)) + +#define SMA1307_TDM_SLOT1_TX_POS_MASK (BIT(0)|BIT(1)|BIT(2)) +#define SMA1307_TDM_SLOT1_TX_POS_0 0 +#define SMA1307_TDM_SLOT1_TX_POS_1 BIT(0) +#define SMA1307_TDM_SLOT1_TX_POS_2 BIT(1) +#define SMA1307_TDM_SLOT1_TX_POS_3 (BIT(0)|BIT(1)) +#define SMA1307_TDM_SLOT1_TX_POS_4 BIT(2) +#define SMA1307_TDM_SLOT1_TX_POS_5 (BIT(0)|BIT(2)) +#define SMA1307_TDM_SLOT1_TX_POS_6 (BIT(1)|BIT(2)) +#define SMA1307_TDM_SLOT1_TX_POS_7 (BIT(0)|BIT(1)|BIT(2)) + +/* OTP STATUS */ +#define SMA1307_OTP_STAT_MASK BIT(6) +#define SMA1307_OTP_STAT_0 0 +#define SMA1307_OTP_STAT_1 BIT(6) + +/* STATUS */ +#define SMA1307_OT1_OK_STATUS BIT(7) +#define SMA1307_OT2_OK_STATUS BIT(6) +#define SMA1307_UVLO_STATUS BIT(5) +#define SMA1307_OVP_BST_STATUS BIT(4) +#define SMA1307_POWER_FLAG BIT(3) + +#define SMA1307_SCAN_CHK BIT(7) +#define SMA1307_OCP_SPK_STATUS BIT(5) +#define SMA1307_OCP_BST_STATUS BIT(4) +#define SMA1307_BOP_STATE (BIT(1)|BIT(2)|BIT(3)) +#define SMA1307_CLK_MON_STATUS BIT(0) + +#define SMA1307_DEVICE_ID (BIT(3)|BIT(4)) +#define SMA1307_REV_NUM_STATUS (BIT(0)|BIT(1)) +#define SMA1307_REV_NUM_REV0 0 +#define SMA1307_REV_NUM_REV1 BIT(0) + +#endif -- 2.39.2

2 2

[PATCH v1] ASoC: tas2781: Add new driver version for tas2563 & tas2781 qfn chip
by Shenghao Ding 04 Nov '24

04 Nov '24

Add new driver version to support tas2563 & tas2781 qfn chip Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- sound/soc/codecs/tas2781-fmwlib.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index ae360c97fe1e..0aeb88abbf52 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -1992,6 +1992,7 @@ static int tasdevice_dspfw_ready(const struct firmware *fmw, break; case 0x202: case 0x400: + case 0x401: tas_priv->fw_parse_variable_header = fw_parse_variable_header_git; tas_priv->fw_parse_program_data = -- 2.34.1

2 1

[tiwai-sound:for-next 8/9] sound/pci/hda/hda_intel.c:1035:26: warning: variable 'bus' set but not used
by kernel test robot 04 Nov '24

04 Nov '24

tree: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git for-next head: 149cb7d9537e241b43056fb4133f56832ac51b7a commit: cac99f73f0752e1c83674e12fb2c605dca9ce474 [8/9] ALSA: hda: intel: Don't free interrupt when suspending config: x86_64-defconfig (https://download.01.org/0day-ci/archive/20241105/202411050247.3esQz7Am-lkp@…) compiler: gcc-11 (Debian 11.3.0-12) 11.3.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241105/202411050247.3esQz7Am-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411050247.3esQz7Am-lkp@intel.com/ All warnings (new ones prefixed by >>): sound/pci/hda/hda_intel.c: In function 'azx_suspend': >> sound/pci/hda/hda_intel.c:1035:26: warning: variable 'bus' set but not used [-Wunused-but-set-variable] 1035 | struct hdac_bus *bus; | ^~~ vim +/bus +1035 sound/pci/hda/hda_intel.c f5dac54d9d9382 Kai-Heng Feng 2020-10-27 1030 3baffc4a84d759 Takashi Iwai 2018-12-07 1031 static int azx_suspend(struct device *dev) 3baffc4a84d759 Takashi Iwai 2018-12-07 1032 { 3baffc4a84d759 Takashi Iwai 2018-12-07 1033 struct snd_card *card = dev_get_drvdata(dev); 3baffc4a84d759 Takashi Iwai 2018-12-07 1034 struct azx *chip; 3baffc4a84d759 Takashi Iwai 2018-12-07 @1035 struct hdac_bus *bus; 3baffc4a84d759 Takashi Iwai 2018-12-07 1036 3baffc4a84d759 Takashi Iwai 2018-12-07 1037 if (!azx_is_pm_ready(card)) c5c215232dfb71 Takashi Iwai 2012-12-04 1038 return 0; c5c215232dfb71 Takashi Iwai 2012-12-04 1039 3baffc4a84d759 Takashi Iwai 2018-12-07 1040 chip = card->private_data; a41d122449bea3 Takashi Iwai 2015-04-14 1041 bus = azx_bus(chip); 472e18f63c425d Imre Deak 2021-06-23 1042 azx_shutdown_chip(chip); 785d8c4be82b45 Libin Yang 2015-05-12 1043 785d8c4be82b45 Libin Yang 2015-05-12 1044 trace_azx_suspend(chip); ^1da177e4c3f41 Linus Torvalds 2005-04-16 1045 return 0; ^1da177e4c3f41 Linus Torvalds 2005-04-16 1046 } ^1da177e4c3f41 Linus Torvalds 2005-04-16 1047 :::::: The code at line 1035 was first introduced by commit :::::: 3baffc4a84d759ba54c461e8e4583bd8890c749a ALSA: hda/intel: Refactoring PM code :::::: TO: Takashi Iwai <tiwai(a)suse.de> :::::: CC: Takashi Iwai <tiwai(a)suse.de> -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH v3 0/2] Add a driver for the Iron Device SMA1307 Amp
by Ki-Seok Jo 04 Nov '24

04 Nov '24

This adds basic audio support for the Iron Device SMA1307 amplifier Signed-off-by: Kiseok Jo <kiseok.jo(a)irondevice.com> --- Kiseok Jo (2): ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding ASoC: sma1307: Add driver for Iron Device SMA1307 .../bindings/sound/irondevice,sma1307.yaml | 54 + To | 0 sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sma1307.c | 2052 ++++++++++++++++++++ sound/soc/codecs/sma1307.h | 444 +++++ 6 files changed, 2562 insertions(+) --- base-commit: 06df5968fd2f418b5729c43fffd65388ef0448f4 change-id: 20241007-irondevice-sma1307-ffc42b218574 Best regards, -- Kiseok Jo <kiseok.jo(a)irondevice.com>

1 0

Add support for ASRock X870E Taichi
by GitHub pull_request - opened 31 Oct '24

31 Oct '24

alsa-project/alsa-ucm-conf pull request #457 was opened from julmajustus: Included id 26ce:0a0b to realtek-alc4080 list. USB Audio S/PDIF Output, USB Audio Rear input and USB Audio Front Headphones seems to work now without issues with HiFi 2.0 channels. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/457 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/457.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Direct MIDI event delivery to ALSA sequencer's hardware port without any connections/subscriptions fails with -ENODEV.
by giedrius＠blokas.io 31 Oct '24

31 Oct '24

Hello, I had written an `aseqsend` utility to send MIDI events from hex strings to ALSA sequencer ports, similar to the -S arg of `amidi`, but I just noticed that while sending events directly to application ALSA Sequencer ports works just fine, trying to send to a hardware MIDI port fails with -19 (-ENODEV). Here's the aseqsend utility code, the highlighted line is the one returning -ENODEV: https://github.com/BlokasLabs/aseqsend/blob/main/aseqsend.c#L173 Here's some sample commands showcasing the problem (I've added a printf with drain result just after the indicated line above locally): https://paste.debian.net/hidden/9690d660/ It shows that in case there's no active subscriptions to the port, the event delivery fails, with no data ever reaching the hardware device. As long as there's at least one subscription to the port, it works ok. I've reproduced this on 5.15.36-rt41-v7+ and 6.6.58-v8-16k (running on Raspberry Pi, based on https://github.com/raspberrypi/linux) I've traced the -ENODEV to be returned at this location: https://elixir.bootlin.com/linux/v6.6.58/source/sound/core/seq/seq_midi.c#L… Whenever there's a subscription, the 'substream' is not NULL. But what I would naturally expect is for the events to get delivered to the hardware port when using direct addressing, regardless of its subscription status, the same way how it's possible to send events to application aseq ports: -- Terminal 1 -- patch@patchbox:~ $ aseqdump Waiting for data at port 128:0. Press Ctrl+C to end. Source Event Ch Data 129:0 Note on 0, note 64, velocity 48 -- Terminal 2 -- patch@patchbox:~/work/aseqsend $ ./aseqsend 128:0 90 40 30 drain: 0 Is this a bug in ALSA Sequencer, or is my expectation of being able to write directly to a hardware ALSA sequencer port incorrect?

3 3

[PATCH v29 00/33] Introduce QC USB SND audio offloading support
by Wesley Cheng 31 Oct '24

31 Oct '24

Requesting to see if we can get some Acked-By tags, and merge on usb-next. Several Qualcomm based chipsets can support USB audio offloading to a dedicated audio DSP, which can take over issuing transfers to the USB host controller. The intention is to reduce the load on the main processors in the SoC, and allow them to be placed into lower power modes. There are several parts to this design: 1. Adding ASoC binding layer 2. Create a USB backend for Q6DSP 3. Introduce XHCI interrupter support 4. Create vendor ops for the USB SND driver USB | ASoC -------------------------------------------------------------------- | _________________________ | |sm8250 platform card | | |_________________________| | | | | ___V____ ____V____ | |Q6USB | |Q6AFE | | |"codec" | |"cpu" | | |________| |_________| | ^ ^ ^ | | |________| | ___V____ | | |SOC-USB | | ________ ________ | | | |USB SND |<--->|QC offld|<------------>|________| | |(card.c)| | |<---------- | |________| |________|___ | | | ^ ^ | | | ____________V_________ | | | | | |APR/GLINK | __ V_______________V_____ | | | |______________________| |USB SND (endpoint.c) | | | | ^ |_________________________| | | | | ^ | | | ___________V___________ | | | |->|audio DSP | ___________V_____________ | | |_______________________| |XHCI HCD |<- | |_________________________| | Adding ASoC binding layer ========================= soc-usb: Intention is to treat a USB port similar to a headphone jack. The port is always present on the device, but cable/pin status can be enabled/disabled. Expose mechanisms for USB backend ASoC drivers to communicate with USB SND. Create a USB backend for Q6DSP ============================== q6usb: Basic backend driver that will be responsible for maintaining the resources needed to initiate a playback stream using the Q6DSP. Will be the entity that checks to make sure the connected USB audio device supports the requested PCM format. If it does not, the PCM open call will fail, and userspace ALSA can take action accordingly. Introduce XHCI interrupter support ================================== XHCI HCD supports multiple interrupters, which allows for events to be routed to different event rings. This is determined by "Interrupter Target" field specified in Section "6.4.1.1 Normal TRB" of the XHCI specification. Events in the offloading case will be routed to an event ring that is assigned to the audio DSP. Create vendor ops for the USB SND driver ======================================== qc_audio_offload: This particular driver has several components associated with it: - QMI stream request handler - XHCI interrupter and resource management - audio DSP memory management When the audio DSP wants to enable a playback stream, the request is first received by the ASoC platform sound card. Depending on the selected route, ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI will send an AFE port start command (with enabling the USB playback path), and the audio DSP will handle the request accordingly. Part of the AFE USB port start handling will have an exchange of control messages using the QMI protocol. The qc_audio_offload driver will populate the buffer information: - Event ring base address - EP transfer ring base address and pass it along to the audio DSP. All endpoint management will now be handed over to the DSP, and the main processor is not involved in transfers. Overall, implementing this feature will still expose separate sound card and PCM devices for both the platform card and USB audio device: 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D SM8250-MTP-WCD9380-WSA8810-VA-DMIC 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed This is to ensure that userspace ALSA entities can decide which route to take when executing the audio playback. In the above, if card#1 is selected, then USB audio data will take the legacy path over the USB PCM drivers, etc... The current limitation is that the latest USB audio device that is identified will be automatically selected by the Q6USB BE DAI for offloading. Future patches can be added to possibly add for more flexibility, but until the userpace applications can be better defined, having these mechanisms will complicate the overall implementation. USB offload Kcontrols ===================== Part of the vendor offload package will have a mixer driver associated with it (mixer_usb_offload.c). This entity will be responsible for coordinating with SOC USB and the Q6USB backend DAI to fetch information about the sound card and PCM device indices associated with the offload path. The logic is done based on the current implementation of how paths are controlled within the QC ASoC implementation. QC ASoC Q6Routing ----------------- Within the Q6 ASOC design, the registered ASoC platform card will expose a set of kcontrols for enabling the BE DAI links to the FE DAI link. For example: tinymix -D 0 contents Number of controls: 1033 ctl type num name value ... 1025 BOOL 1 USB Mixer MultiMedia1 Off 1026 BOOL 1 USB Mixer MultiMedia2 Off 1027 BOOL 1 USB Mixer MultiMedia3 Off 1028 BOOL 1 USB Mixer MultiMedia4 Off 1029 BOOL 1 USB Mixer MultiMedia5 Off 1030 BOOL 1 USB Mixer MultiMedia6 Off 1031 BOOL 1 USB Mixer MultiMedia7 Off 1032 BOOL 1 USB Mixer MultiMedia8 Off Each of these kcontrols will enable the USB BE DAI link (q6usb) to be connected to a FE DAI link (q6asm). Since each of these controls are DAPM widgets, when it is enabled, the DAPM widget's "connect" flag is updated accordingly. USB Offload Mapping ------------------- Based on the Q6routing, the USB BE DAI link can determine which sound card and PCM device is enabled for offloading. Fetching the ASoC platform sound card's information is fairly straightforward, and the bulk of the work goes to finding the corresponding PCM device index. As mentioned above, the USB BE DAI can traverse the DAPM widgets to find the DAPM path that is related to the control for the "USB Mixer." Based on which "USB Mixer" is enabled, it can find the corresponding DAPM widget associated w/ the FE DAI link (Multimedia*). From there it can find the PCM device created for the Multimedia* stream. Only one BE DAI link can be enabled per FE DAI. For example, if the HDMI path is enabled for Multimedia1, the USB Mixer will be disabled and switched over. Examples of kcontrol -------------------- tinymix -D 0 contents Number of controls: 1033 ctl type num name ... 1025 BOOL 1 USB Mixer MultiMedia1 Off 1026 BOOL 1 USB Mixer MultiMedia2 On 1027 BOOL 1 USB Mixer MultiMedia3 Off 1028 BOOL 1 USB Mixer MultiMedia4 Off 1029 BOOL 1 USB Mixer MultiMedia5 Off 1030 BOOL 1 USB Mixer MultiMedia6 Off 1031 BOOL 1 USB Mixer MultiMedia7 Off 1032 BOOL 1 USB Mixer MultiMedia8 Off tinymix -D 2 contents Number of controls: 7 ctl type num name value 0 INT 2 Playback Channel Map 0, 0 (range 0->36) 1 BOOL 2 MDR-1ADAC Playback Switch On, On 2 BOOL 1 MDR-1ADAC Playback Switch On 3 INT 2 MDR-1ADAC Playback Volume 127, 127 (range 0->127) 4 INT 1 MDR-1ADAC Playback Volume 127 (range 0->127) 5 BOOL 1 Sony Internal Clock Validity On 6 INT 2 USB Offload Playback Route PCM#0 0, 1 (range -1->255) The example highlights that the userspace/application can utilize the offload path for the USB device on card#0 PCM device#1. When dealing with multiple USB audio devices, only the latest USB device identified is going to be selected for offload capable. tinymix -D 1 contents Number of controls: 9 ctl type num name value 0 INT 2 Capture Channel Map 0, 0 (range 0->36) 1 INT 2 Playback Channel Map 0, 0 (range 0->36) 2 BOOL 1 Headset Capture Switch On 3 INT 1 Headset Capture Volume 1 (range 0->4) 4 BOOL 1 Sidetone Playback Switch On 5 INT 1 Sidetone Playback Volume 4096 (range 0->8192) 6 BOOL 1 Headset Playback Switch On 7 INT 2 Headset Playback Volume 20, 20 (range 0->24) 8 INT 2 USB Offload Playback Route PCM#0 -1, -1 (range -1->255) "-1, -1" shows that this device has no route to the offload path. This feature was validated using: - tinymix: set/enable the multimedia path to route to USB backend - tinyplay: issue playback on platform card Changelog -------------------------------------------- Changes in v29: - Fixed some phrases/wording within the SOC USB documentation, and also added an output with aplay -l for the example output. - Fixed allocated string buffer for creating the USB SND offload mixer, and added a PCM index check to ensure that the pcm index is less than the expected number. - Added a complement enable jack call if USB backend DAI link drivers need access to it. Changes in v28: - Updated comments and commit log in the stop endpoint sync patch. Clarified that the default stop endpoint completion routine won't fully run as expected since it has a completion associated w/ the command. - Added a null check for sb->xhci within xhci_sideband_create_interrupter(). This is to just ensure that caller has registered sideband before calling create interrupter. Changes in v27: - Added some comments and notes about the offload design. Enforcing the q6routing to only allow one USB mixer (PCM device) to be enabled at a time. - Modified SND_JACK_USB notifications for all USB audio offloadable devices plugged in - Rebased on latest XHCI secondary interrupter IMOD changes upstream. Modified the change in this series to allow for XHCI sideband to set the IMOD for sideband clients. - Updated documentation on how USB SND kcontrols are involved in the overall design. - Remove mutex locking from suspend/resume platform ops, as USB core ensures that the interface and device are in the RPM_ACTIVE state while disconnect is handled. Changes in v26: - Cleaned up drivers based on errors from checkpatch - Fixed several typos using codespell - Removed any vendor specific notation from USB SND offload mixer patch Changes in v25: - Cleanups on typos mentioned within the xHCI layers - Modified the xHCI interrupter search if clients specify interrupter index - Moved mixer_usb_offload into its own module, so that other vendor offload USB modules can utilize it also. - Added support for USB audio devices that may have multiple PCM streams, as previous implementation only assumed a single PCM device. SOC USB will be able to handle an array of PCM indexes supported by the USB audio device. - Added some additional checks in the QC USB offload driver to check that device has at least one playback stream before allowing to bind - Reordered DT bindings to fix the error found by Rob's bot. The patch that added USB_RX was after the example was updated. - Updated comments within SOC USB to clarify terminology and to keep it consistent - Added SND_USB_JACK type for notifying of USB device audio connections Changes in v24: - Simplified the kcontrols involved in determining how to utilize the offload path. - There is one kcontrol registered to each USB audio device that will output which card/pcm device it is mapped to for the offload route. - Removed kcontrols to track offload status and device selection. - Default to last USB audio device plugged in as offload capable. - kcontrol will reside on USB SND device. - Reworked the tracking of connected USB devices from the Q6USB BE DAI link. Previously, it was convoluted by doing it over an array, but moved to using a list made it much simpler. Logic is still unchanged in that the last USB headset plugged in will be selected for offloading. - Updated the USB SOC RST documentation accordingly with new kcontrol updates. - Added logic to fetch mapped ASoC card and pcm device index that the offload path is mapped to for the USB SND kcontrol (for offload route). - Re-ordered series to hopefully make reviews more readable by combining patches based on the layer modified (ie QC ASoC, ASoC, USB sound, and USB XHCI). Changes in v23: - Added MODULE_DESCRIPTION() fields to drivers that needed it. Changes in v22: - Removed components tag for the ASoC platform card, as the USB SND kcontrol for notifying userspace of offload capable card achieves similar results. - Due to the above, had to remove the review-by tag for the RST documentation, as changes were made to remove the components tag section. - Took in feedback to make the SOC USB add/remove ports void. - Fixed an issue w/ the USB SND kcontrol management for devices that have multi UAC interfaces. (would attempt to create the kcontrol more than once) - Modified SOC USB card and PCM index select to be based off the num_supported streams that is specified by the USB BE DAI. - Modified comments on selecting the latest USB headset for offloading. Changes in v21: - Added an offload jack disable path from the ASoC platform driver and SOC USB. - Refactored some of the existing SOC USB context look up APIs and created some new helpers to search for the USB context. - Renamed snd_soc_usb_find_format to snd_soc_usb_find_supported_format - Removed some XHCI sideband calls that would allow clients to actually enable the IRQ line associated w/ the secondary interrupter. This is removed because there are other dependencies that are required for that to happen, which are not covered as part of this series, and to avoid confusion. - Due to the above, removed the need to export IMOD setting, and enable/disable interrupter APIs. Changes in v20: - Fixed up some formatting changes pointed out in the usb.rst - Added SB null check during XHCI sideband unregister in case caller passes improper argument (xhci_sideband_unregister()) Changes in v19: - Rebased to usb-next to account for some new changes in dependent drivers. Changes in v18: - Rebased to usb-next, which merged in part of the series. Removed these patches. - Reworked Kconfigs for the ASoC USB related components from QCOM Q6DSP drivers to keep dependencies in place for SoC USB and USB SND. - Removed the repurposing of the stop ep sync API into existing XHCI operations. This will be solely used by the XHCI sideband for now. Changes in v17: - Fixed an issue where one patch was squashed into another. - Re-added some kconfig checks for helpers exposed in USB SND for the soc usb driver, after running different kconfigs. Changes in v16: - Modified some code layer dependencies so that soc usb can be split as a separate module. - Split the kcontrols from ASoC QCOM common layer into a separate driver - Reworked SOC USB kcontrols for controlling card + pcm offload routing and status so that there are individual controls for card and pcm devices. - Added a kcontrol remove API in SOC USB to remove the controls on the fly. This required to add some kcontrol management to SOC USB. - Removed the disconnect work and workqueue for the QC USB offload as it is not required, since QMI interface driver ensures events are handled in its own WQ. Changes in v15: - Removed some already merged XHCI changes - Separated SOC USB driver from being always compiled into SOC core. Now configurable from kconfig. - Fixed up ASoC kcontrol naming to fit guidelines. - Removed some unnecessary dummy ifdefs. - Moved usb snd offload capable kcontrol to be initialized by the platform offloading driver. Changes in v14: - Cleaned up some USB SND related feedback: - Renamed SNDUSB OFFLD playback available --> USB offload capable card - Fixed locking while checking if stream is in use - Replaced some mutex pairs with guard(mutex) Changes in v13: - Pulled in secondary/primary interrupter rework from Mathias from: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/drivers… - Did some cleanup and commit message updates, and tested on current code base. - Added mutex locking to xhci sideband to help prevent any race conditions, esp. for when accessing shared references. - Addressed concerns from Hillf about gfp_flags and locking used in qc_usb_audio_offload. - Rebased onto usb-next Changes in v12: - Updated copyright year to 2024. Happy new years! - Fixed newline format on mixer offload driver. Changes in v11: - Modified QMI format structures to be const Changes in v10: - Added new mixer for exposing kcontrol for sound card created by USB SND. This allows for applications to know which platform sound card has offload support. Will return the card number. - Broke down and cleaned up some functions/APIs within qc_audio_offload driver. - Exported xhci_initialize_ring_info(), and modified XHCI makefile to allow for the XHCI sideband to exist as a module. - Reworked the jack registration and moved it to the QCOM platform card driver, ie sm8250. - Added an SOC USB API to fetch a standard component tag that can be appended to the platform sound card. Added this tag to sm8250 if any USB path exists within the DT node. - Moved kcontrols that existed in the Q6USB driver, and made it a bit more generic, so that naming can be standardized across solutions. SOC USB is now responsible for creation of these kcontrols. - Added a SOC USB RST document explaining some code flows and implementation details so that other vendors can utilize the framework. - Addressed a case where USB device connection events are lost if usb offload driver (qc_audio_offload) is not probed when everything else has been initialized, ie USB SND, SOC USB and ASoC sound card. Add a rediscover device call during module init, to ensure that connection events will be propagated. - Rebased to usb-next. Changes in v9: - Fixed the dt binding check issue with regards to num-hc-interrupters. Changes in v8: - Cleaned up snd_soc_usb_find_priv_data() based on Mark's feedback. Removed some of the duplicate looping code that was present on previous patches. Also renamed the API. - Integrated Mathias' suggestions on his new sideband changes: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Addressed some of Mathias' fixme tags, such as: - Resetting transfer ring dequeue/enqueue pointers - Issuing stop endpoint command during ep removal - Reset ERDP properly to first segment ring during interrupter removal. (this is currently just being cleared to 0, but should be pointing to a valid segment if controller is still running. Changes in v7: - Fixed dt check error for q6usb bindings - Updated q6usb property from qcom,usb-audio-intr-num --> qcom,usb-audio-intr-idx - Removed separate DWC3 HC interrupters num property, and place limits to XHCI one. - Modified xhci_ring_to_sgtable() to use assigned IOVA/DMA address to fetch pages, as it is not ensured event ring allocated is always done in the vmalloc range. Changes in v6: - Fixed limits and description on several DT bindings (XHCI and Q6USB) - Fixed patch subjects to follow other ALSA/ASoC notations. USB SND - Addressed devices which expose multiple audio (UAC) interfaces. These devices will create a single USB sound card with multiple audio streams, and receive multiple interface probe routines. QC offload was not properly considering cases with multiple probe calls. - Renamed offload module name and kconfig to fit within the SND domain. - Renamed attach/detach endpoint API to keep the hw_params notation. Changes in v5: - Removed some unnecessary files that were included - Fixed some typos mentioned - Addressed dt-binding issues and added hc-interrupters definition to usb-xhci.yaml XHCI: - Moved secondary skip events API to xhci-ring and updated implementation - Utilized existing XHCI APIs, such as inc_deq and xhci_update_erst_dequeue() USB SND - Renamed and reworked the APIs in "sound: usb: Export USB SND APIs for modules" patch to include suggestions to utilize snd_usb_hw_params/free and to avoid generic naming. - Added a resume_cb() op for completion sake. - Addressed some locking concerns with regards to when registering for platform hooks. - Added routine to disconnect all offloaded devices during module unbind. ASoC - Replaced individual PCM parameter arguments in snd_soc_usb_connect() with new snd_soc_usb_device structure to pass along PCM info. - Modified snd_jack set report to notify HEADPHONE event, as we do not support record path. Changes in v4: - Rebased to xhci/for-usb-next - Addressed some dt-bindings comments XHCI: - Pulled in latest changes from Mathias' feature_interrupters branch: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Fixed commit text and signage for the XHCI sideband/interrupter related changes - Added some logic to address the FIXME tags mentioned throughout the commits, such as handling multi segment rings and building the SGT, locking concerns, and ep cleanup operations. - Removed some fixme tags for conditions that may not be needed/addressed. - Repurposed the new endpoint stop sync API to be utilized in other places. - Fixed potential compile issue if XHCI sideband config is not defined. ASoC: - Added sound jack control into the Q6USB driver. Allows for userspsace to know when an offload capable device is connected. USB SND: - Avoided exporting _snd_pcm_hw_param_set based on Takashi's recommendation. - Split USB QMI packet header definitions into a separate commit. This is used to properly allow the QMI interface driver to parse and route QMI packets accordingly - Added a "depends on" entry when enabling QC audio offload to avoid compile time issues. Changes in v3: - Changed prefix from RFC to PATCH - Rebased entire series to usb-next - Updated copyright years XHCI: - Rebased changes on top of XHCI changes merged into usb-next, and only added changes that were still under discussion. - Added change to read in the "num-hc-interrupters" device property. ASoC: - qusb6 USB backend - Incorporated suggestions to fetch iommu information with existing APIs - Added two new sound kcontrols to fetch offload status and offload device selection. - offload status - will return the card and pcm device in use tinymix -D 0 get 1 --> 1, 0 (offload in progress on card#1 pcm#0) - device selection - set the card and pcm device to enable offload on. Ex.: tinymix -D 0 set 1 2 0 --> sets offload on card#2 pcm#0 (this should be the USB card) USB SND: - Fixed up some locking related concerns for registering platform ops. - Moved callbacks under the register_mutex, so that - Modified APIs to properly pass more information about the USB SND device, so that the Q6USB backend can build a device list/map, in order to monitor offload status and device selection. Changes in v2: XHCI: - Replaced XHCI and HCD changes with Mathias' XHCI interrupter changes in his tree: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… Adjustments made to Mathias' changes: - Created xhci-intr.h to export/expose interrupter APIs versus exposing xhci.h. Moved dependent structures to this file as well. (so clients can parse out information from "struct xhci_interrupter") - Added some basic locking when requesting interrupters. - Fixed up some sanity checks. - Removed clearing of the ERSTBA during freeing of the interrupter. (pending issue where SMMU fault occurs if DMA addr returned is 64b - TODO) - Clean up pending events in the XHCI secondary interrupter. While testing USB bus suspend, it was seen that on bus resume, the xHCI HC would run into a command timeout. - Added offloading APIs to xHCI to fetch transfer and event ring information. ASoC: - Modified soc-usb to allow for multiple USB port additions. For this to work, the USB offload driver has to have a reference to the USB backend by adding a "usb-soc-be" DT entry to the device saved into XHCI sysdev. - Created separate dt-bindings for defining USB_RX port. - Increased APR timeout to accommodate the situation where the AFE port start command could be delayed due to having to issue a USB bus resume while handling the QMI stream start command. Mathias Nyman (3): xhci: support setting interrupt moderation IMOD for secondary interrupters xhci: add helper to stop endpoint and wait for completion xhci: sideband: add initial api to register a sideband entity Wesley Cheng (30): usb: host: xhci: Repurpose event handler for skipping interrupter events usb: xhci: xhci-sideband: Set IMOD for xHCI sideband clients usb: host: xhci-mem: Cleanup pending secondary event ring events usb: host: xhci-mem: Allow for interrupter clients to choose specific index usb: host: xhci-plat: Set XHCI max interrupters if property is present usb: dwc3: Specify maximum number of XHCI interrupters ALSA: Add USB audio device jack type ALSA: usb-audio: Export USB SND APIs for modules ALSA: usb-audio: Check for support for requested audio format ALSA: usb-audio: Save UAC sample size information ALSA: usb-audio: Prevent starting of audio stream if in use ASoC: Add SOC USB APIs for adding an USB backend ASoC: usb: Add PCM format check API for USB backend ASoC: usb: Create SOC USB SND jack kcontrol ASoC: usb: Fetch ASoC card and pcm device information ASoC: doc: Add documentation for SOC USB ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port ASoC: dt-bindings: Update example for enabling USB offload on SM8250 ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp ASoC: qcom: qdsp6: q6afe: Increase APR timeout ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6 ASoC: qcom: qdsp6: Add headphone jack for offload connection status ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device ALSA: usb-audio: Introduce USB SND platform op callbacks ALSA: usb-audio: qcom: Add USB QMI definitions ALSA: usb-audio: qcom: Introduce QC USB SND offloading support ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use ALSA: usb-audio: Add USB offload route kcontrol ALSA: usb-audio: Allow for rediscovery of connected USB SND devices ASoC: usb: Rediscover USB SND devices on USB port add .../bindings/sound/qcom,sm8250.yaml | 15 + Documentation/sound/soc/index.rst | 1 + Documentation/sound/soc/usb.rst | 491 ++++ drivers/usb/dwc3/core.c | 12 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/host.c | 3 + drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 2 + drivers/usb/host/xhci-mem.c | 37 +- drivers/usb/host/xhci-plat.c | 2 + drivers/usb/host/xhci-ring.c | 54 +- drivers/usb/host/xhci-sideband.c | 425 ++++ drivers/usb/host/xhci.c | 51 +- drivers/usb/host/xhci.h | 19 +- .../sound/qcom,q6dsp-lpass-ports.h | 1 + include/linux/mod_devicetable.h | 2 +- include/linux/usb/xhci-sideband.h | 70 + include/sound/jack.h | 4 +- include/sound/q6usboffload.h | 20 + include/sound/soc-usb.h | 147 ++ include/uapi/linux/input-event-codes.h | 3 +- sound/core/jack.c | 6 +- sound/soc/Kconfig | 10 + sound/soc/Makefile | 2 + sound/soc/qcom/Kconfig | 15 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 60 + sound/soc/qcom/qdsp6/q6afe.c | 194 +- sound/soc/qcom/qdsp6/q6afe.h | 36 +- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 32 +- sound/soc/qcom/qdsp6/q6usb.c | 391 ++++ sound/soc/qcom/sm8250.c | 24 +- sound/soc/qcom/usb_offload_utils.c | 56 + sound/soc/qcom/usb_offload_utils.h | 30 + sound/soc/soc-usb.c | 369 +++ sound/usb/Kconfig | 25 + sound/usb/Makefile | 4 +- sound/usb/card.c | 106 + sound/usb/card.h | 17 + sound/usb/endpoint.c | 1 + sound/usb/format.c | 1 + sound/usb/helper.c | 1 + sound/usb/mixer_usb_offload.c | 102 + sound/usb/mixer_usb_offload.h | 17 + sound/usb/pcm.c | 104 +- sound/usb/pcm.h | 11 + sound/usb/qcom/Makefile | 2 + sound/usb/qcom/qc_audio_offload.c | 1974 +++++++++++++++++ sound/usb/qcom/usb_audio_qmi_v01.c | 863 +++++++ sound/usb/qcom/usb_audio_qmi_v01.h | 164 ++ 53 files changed, 5957 insertions(+), 57 deletions(-) create mode 100644 Documentation/sound/soc/usb.rst create mode 100644 drivers/usb/host/xhci-sideband.c create mode 100644 include/linux/usb/xhci-sideband.h create mode 100644 include/sound/q6usboffload.h create mode 100644 include/sound/soc-usb.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c create mode 100644 sound/soc/qcom/usb_offload_utils.c create mode 100644 sound/soc/qcom/usb_offload_utils.h create mode 100644 sound/soc/soc-usb.c create mode 100644 sound/usb/mixer_usb_offload.c create mode 100644 sound/usb/mixer_usb_offload.h create mode 100644 sound/usb/qcom/Makefile create mode 100644 sound/usb/qcom/qc_audio_offload.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h

5 44

[GIT PULL] ASoC fixes for v6.12-rc5
by Mark Brown 30 Oct '24

30 Oct '24

The following changes since commit db7e59e6a39a4d3d54ca8197c796557e6d480b0d: ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc (2024-10-22 21:00:38 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.12-rc5 for you to fetch changes up to 2db63e92186d7201ee1cb2f5af11757c5e5a1020: wcd937x codec fixes (2024-10-29 19:18:48 +0000) ---------------------------------------------------------------- ASoC: Fixes for v6.12 The biggest set of changes here is Hans' fixes and quirks for various Baytrail based platforms with RT5640 CODECs, and there's one core fix for a missed length assignment for __counted_by() checking. Otherwise it's small device specific fixes, several of them in the DT bindings. ---------------------------------------------------------------- Aleksei Vetrov (1): ASoC: dapm: fix bounds checker error in dapm_widget_list_create Alexey Klimov (2): ASoC: codecs: wcd937x: add missing LO Switch control ASoC: codecs: wcd937x: relax the AUX PDM watchdog Christophe JAILLET (1): ASoC: cs42l51: Fix some error handling paths in cs42l51_probe() Dmitry Yashin (1): ASoC: dt-bindings: rockchip,rk3308-codec: add port property Hans de Goede (5): ASoC: codecs: rt5640: Always disable IRQs from rt5640_cancel_work() ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet ASoC: Intel: sst: Support LPE0F28 ACPI HID ASoC: Intel: sst: Fix used of uninitialized ctx to log an error Mark Brown (1): wcd937x codec fixes .../bindings/sound/rockchip,rk3308-codec.yaml | 4 ++ sound/hda/intel-dsp-config.c | 4 ++ sound/soc/codecs/cs42l51.c | 7 ++- sound/soc/codecs/rt5640.c | 27 +++++---- sound/soc/codecs/wcd937x.c | 12 +++- sound/soc/codecs/wcd937x.h | 4 ++ sound/soc/intel/atom/sst/sst_acpi.c | 64 +++++++++++++++++++--- sound/soc/intel/boards/bytcr_rt5640.c | 48 +++++++++++++++- sound/soc/soc-dapm.c | 2 + 9 files changed, 144 insertions(+), 28 deletions(-)

2 1

Why Choose a Dedicated Server for Your Business?
by David Menk 29 Oct '24

29 Oct '24

Hello everyone, I wanted to share some insights on why dedicated server hosting can be a game-changer for businesses, especially those with high-traffic websites or specific performance needs. What is a Dedicated Server? A dedicated server is a physical server that's exclusively used by one client. Unlike shared hosting, where resources are split between multiple users, a dedicated server gives you complete control over CPU, RAM, storage, and bandwidth, making it ideal for websites or applications that need consistent performance, security, and reliability. Benefits of Using a Dedicated Server: Performance and Speed: With dedicated resources, your website or application can handle high volumes of traffic without slowing down. This is especially important for e-commerce sites or any business where speed impacts the user experience. Enhanced Security: Dedicated servers offer stronger security, as you're not sharing the server with other users. You can implement custom security measures tailored to your business, helping to protect against potential breaches and data loss. Full Control and Customization: Since the server is dedicated to you, you have complete control over the operating system, software, and applications you want to run. This level of customization can be essential for companies with specific software requirements. Scalability: As your business grows, dedicated servers can be upgraded with additional resources to meet your increasing demands, providing flexibility without the need to migrate to another server. Better Reliability: Dedicated servers are less prone to outages or downtime compared to shared hosting, providing a stable environment that’s crucial for businesses that rely on 24/7 availability. Is a Dedicated Server Right for You? If your website or application has high traffic, complex applications, or sensitive data, a dedicated server could be the right choice. It's a bit more of an investment, but the control, performance, and reliability often pay off in the long run. If anyone has experience with dedicated servers or is considering making the switch, I’d love to hear your thoughts and any advice you might have! Looking forward to the discussion!

1 1