- Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 1/2] sis7019: support the SiS 7019 Audio Accelerator
by Dave Dillow 13 Dec '07

13 Dec '07

Basic audio support for the SiS 7019 Audio Accelerator as found in the SiS 55x SoC. There is currently no synth support at the moment, but audio playback and capture with two periods per buffer has seen extensive use. Arbitrary period and buffer sizes (with multiple periods per buffer) have seen light testing, but are believed to be production ready. Signed-off-by: David Dillow <dave(a)thedillows.org> --- This is against the alsa-kernel hg repo. Changes since last posting: * Cleanups as suggested * Fix a few mistaken hardware limits (off-by-one) pci/sis7019.c | 1462 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ pci/sis7019.h | 342 +++++++++++++ pci/Kconfig | 10 pci/Makefile | 2 4 files changed, 1816 insertions(+) diff -r eb09731e73d7 pci/Kconfig --- a/pci/Kconfig Mon Dec 03 17:08:40 2007 +0100 +++ b/pci/Kconfig Sat Dec 08 18:46:18 2007 -0500 @@ -802,6 +802,16 @@ config SND_RME9652 To compile this driver as a module, choose M here: the module will be called snd-rme9652. +config SND_SIS7019 + tristate "SiS 7019 Audio Accelerator" + depends on SND && X86 && !X86_64 + select SND_AC97_CODEC + help + Say Y here to include support for the SiS 7019 Audio Accelerator. + + To compile this driver as a module, choose M here: the module + will be called snd-sis7019. + config SND_SONICVIBES tristate "S3 SonicVibes" depends on SND diff -r eb09731e73d7 pci/Makefile --- a/pci/Makefile Mon Dec 03 17:08:40 2007 +0100 +++ b/pci/Makefile Sat Dec 08 18:46:18 2007 -0500 @@ -23,6 +23,7 @@ snd-maestro3-objs := maestro3.o snd-maestro3-objs := maestro3.o snd-rme32-objs := rme32.o snd-rme96-objs := rme96.o +snd-sis7019-objs := sis7019.o snd-sonicvibes-objs := sonicvibes.o snd-via82xx-objs := via82xx.o snd-via82xx-modem-objs := via82xx_modem.o @@ -48,6 +49,7 @@ obj-$(CONFIG_SND_MAESTRO3) += snd-maestr obj-$(CONFIG_SND_MAESTRO3) += snd-maestro3.o obj-$(CONFIG_SND_RME32) += snd-rme32.o obj-$(CONFIG_SND_RME96) += snd-rme96.o +obj-$(CONFIG_SND_SIS7019) += snd-sis7019.o obj-$(CONFIG_SND_SONICVIBES) += snd-sonicvibes.o obj-$(CONFIG_SND_VIA82XX) += snd-via82xx.o obj-$(CONFIG_SND_VIA82XX_MODEM) += snd-via82xx-modem.o diff -r eb09731e73d7 pci/sis7019.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/pci/sis7019.c Sat Dec 08 18:46:18 2007 -0500 @@ -0,0 +1,1462 @@ +/* + * Driver for SiS7019 Audio Accelerator + * + * Copyright (C) 2004-2007, David Dillow + * Written by David Dillow <dave(a)thedillows.org> + * Inspired by the Trident 4D-WaveDX/NX driver. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <sound/driver.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/time.h> +#include <linux/moduleparam.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <sound/core.h> +#include <sound/ac97_codec.h> +#include <sound/initval.h> +#include "sis7019.h" + +MODULE_AUTHOR("David Dillow <dave(a)thedillows.org>"); +MODULE_DESCRIPTION("SiS 7019"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("{{SiS,SiS7019 Audio Accelerator}}"); + +static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */ +static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */ +static int enable = 1; + +module_param(index, int, 0444); +MODULE_PARM_DESC(index, "Index value for SiS7019 Audio Accelerator."); +module_param(id, charp, 0444); +MODULE_PARM_DESC(id, "ID string for SiS7019 Audio Accelerator."); +module_param(enable, bool, 0444); +MODULE_PARM_DESC(enable, "Enable SiS7019 Audio Accelerator."); + +static struct pci_device_id snd_sis7019_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x7019) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, snd_sis7019_ids); + +/* There are three timing modes for the voices. + * + * For both playback and capture, when the buffer is one or two periods long, + * we use the hardware's built-in Mid-Loop Interrupt and End-Loop Interrupt + * to let us know when the periods have ended. + * + * When performing playback with more than two periods per buffer, we set + * the "Stop Sample Offset" and tell the hardware to interrupt us when we + * reach it. We then update the offset and continue on until we are + * interrupted for the next period. + * + * Capture channels do not have a SSO, so we allocate a playback channel to + * use as a timer for the capture periods. We use the SSO on the playback + * channel to clock out virtual periods, and adjust the virtual period length + * to maintain synchronization. This algorithm came from the Trident driver. + * + * FIXME: It'd be nice to make use of some of the synth features in the + * hardware, but a woeful lack of documentation is a significant roadblock. + */ +struct voice { + u16 flags; +#define VOICE_IN_USE 1 +#define VOICE_CAPTURE 2 +#define VOICE_SSO_TIMING 4 +#define VOICE_SYNC_TIMING 8 + u16 sync_cso; + u16 period_size; + u16 buffer_size; + u16 sync_period_size; + u16 sync_buffer_size; + u32 sso; + u32 vperiod; + struct snd_pcm_substream *substream; + struct voice *timing; + void __iomem *ctrl_base; + void __iomem *wave_base; + void __iomem *sync_base; + int num; +}; + +/* We need four pages to store our wave parameters during a suspend. If + * we're not doing power management, we still need to allocate a page + * for the silence buffer. + */ +#ifdef CONFIG_PM +#define SIS_SUSPEND_PAGES 4 +#else +#define SIS_SUSPEND_PAGES 1 +#endif + +struct sis7019 { + unsigned long ioport; + void __iomem *ioaddr; + int irq; + int codecs_present; + + struct pci_dev *pci; + struct snd_pcm *pcm; + struct snd_card *card; + struct snd_ac97 *ac97[3]; + + /* Protect against more than one thread hitting the AC97 + * registers (in a more polite manner than pounding the hardware + * semaphore) + */ + struct mutex ac97_mutex; + + /* voice_lock protects allocation/freeing of the voice descriptions + */ + spinlock_t voice_lock; + + struct voice voices[64]; + struct voice capture_voice; + + /* Allocate pages to store the internal wave state during + * suspends. When we're operating, this can be used as a silence + * buffer for a timing channel. + */ + void *suspend_state[SIS_SUSPEND_PAGES]; + + int silence_users; + dma_addr_t silence_dma_addr; +}; + +#define SIS_PRIMARY_CODEC_PRESENT 0x0001 +#define SIS_SECONDARY_CODEC_PRESENT 0x0002 +#define SIS_TERTIARY_CODEC_PRESENT 0x0004 + +/* The HW offset parameters (Loop End, Stop Sample, End Sample) have a + * documented range of 8-0xfff8 samples. Given that they are 0-based, + * that places our period/buffer range at 9-0xfff9 samples. That makes the + * max buffer size 0xfff9 samples * 2 channels * 2 bytes per sample, and + * max samples / min samples gives us the max periods in a buffer. + * + * We'll add a constraint upon open that limits the period and buffer sample + * size to values that are legal for the hardware. + */ +static struct snd_pcm_hardware sis_playback_hw_info = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_SYNC_START | + SNDRV_PCM_INFO_RESUME), + .formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE), + .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 4000, + .rate_max = 48000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = (0xfff9 * 4), + .period_bytes_min = 9, + .period_bytes_max = (0xfff9 * 4), + .periods_min = 1, + .periods_max = (0xfff9 / 9), +}; + +static struct snd_pcm_hardware sis_capture_hw_info = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_SYNC_START | + SNDRV_PCM_INFO_RESUME), + .formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE), + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 4000, + .rate_max = 48000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = (0xfff9 * 4), + .period_bytes_min = 9, + .period_bytes_max = (0xfff9 * 4), + .periods_min = 1, + .periods_max = (0xfff9 / 9), +}; + +static void sis_update_sso(struct voice *voice, u16 period) +{ + void __iomem *base = voice->ctrl_base; + + voice->sso += period; + if (voice->sso >= voice->buffer_size) + voice->sso -= voice->buffer_size; + + /* Enforce the documented hardware minimum offset */ + if (voice->sso < 8) + voice->sso = 8; + + /* The SSO is in the upper 16 bits of the register. */ + writew(voice->sso & 0xffff, base + SIS_PLAY_DMA_SSO_ESO + 2); +} + +static void sis_update_voice(struct voice *voice) +{ + if (voice->flags & VOICE_SSO_TIMING) { + sis_update_sso(voice, voice->period_size); + } else if (voice->flags & VOICE_SYNC_TIMING) { + int sync; + + /* If we've not hit the end of the virtual period, update + * our records and keep going. + */ + if (voice->vperiod > voice->period_size) { + voice->vperiod -= voice->period_size; + if (voice->vperiod < voice->period_size) + sis_update_sso(voice, voice->vperiod); + else + sis_update_sso(voice, voice->period_size); + return; + } + + /* Calculate our relative offset between the target and + * the actual CSO value. Since we're operating in a loop, + * if the value is more than half way around, we can + * consider ourselves wrapped. + */ + sync = voice->sync_cso; + sync -= readw(voice->sync_base + SIS_CAPTURE_DMA_FORMAT_CSO); + if (sync > (voice->sync_buffer_size / 2)) + sync -= voice->sync_buffer_size; + + /* If sync is positive, then we interrupted too early, and + * we'll need to come back in a few samples and try again. + * There's a minimum wait, as it takes some time for the DMA + * engine to startup, etc... + */ + if (sync > 0) { + if (sync < 16) + sync = 16; + sis_update_sso(voice, sync); + return; + } + + /* Ok, we interrupted right on time, or (hopefully) just + * a bit late. We'll adjst our next waiting period based + * on how close we got. + * + * We need to stay just behind the actual channel to ensure + * it really is past a period when we get our interrupt -- + * otherwise we'll fall into the early code above and have + * a minimum wait time, which makes us quite late here, + * eating into the user's time to refresh the buffer, esp. + * if using small periods. + * + * If we're less than 9 samples behind, we're on target. + */ + if (sync > -9) + voice->vperiod = voice->sync_period_size + 1; + else + voice->vperiod = voice->sync_period_size - 4; + + if (voice->vperiod < voice->buffer_size) { + sis_update_sso(voice, voice->vperiod); + voice->vperiod = 0; + } else + sis_update_sso(voice, voice->period_size); + + sync = voice->sync_cso + voice->sync_period_size; + if (sync >= voice->sync_buffer_size) + sync -= voice->sync_buffer_size; + voice->sync_cso = sync; + } + + snd_pcm_period_elapsed(voice->substream); +} + +static void sis_voice_irq(u32 status, struct voice *voice) +{ + int bit; + + while (status) { + bit = __ffs(status); + status >>= bit + 1; + voice += bit; + sis_update_voice(voice); + voice++; + } +} + +static irqreturn_t sis_interrupt(int irq, void *dev) +{ + struct sis7019 *sis = dev; + unsigned long io = sis->ioport; + struct voice *voice; + u32 intr, status; + + /* We only use the DMA interrupts, and we don't enable any other + * source of interrupts. But, it is possible to see an interupt + * status that didn't actually interrupt us, so eliminate anything + * we're not expecting to avoid falsely claiming an IRQ, and an + * ensuing endless loop. + */ + intr = inl(io + SIS_GISR); + intr &= SIS_GISR_AUDIO_PLAY_DMA_IRQ_STATUS | + SIS_GISR_AUDIO_RECORD_DMA_IRQ_STATUS; + if (!intr) + return IRQ_NONE; + + do { + status = inl(io + SIS_PISR_A); + if (status) { + sis_voice_irq(status, sis->voices); + outl(status, io + SIS_PISR_A); + } + + status = inl(io + SIS_PISR_B); + if (status) { + sis_voice_irq(status, &sis->voices[32]); + outl(status, io + SIS_PISR_B); + } + + status = inl(io + SIS_RISR); + if (status) { + voice = &sis->capture_voice; + if (!voice->timing) + snd_pcm_period_elapsed(voice->substream); + + outl(status, io + SIS_RISR); + } + + outl(intr, io + SIS_GISR); + intr = inl(io + SIS_GISR); + intr &= SIS_GISR_AUDIO_PLAY_DMA_IRQ_STATUS | + SIS_GISR_AUDIO_RECORD_DMA_IRQ_STATUS; + } while (intr); + + return IRQ_HANDLED; +} + +static u32 sis_rate_to_delta(unsigned int rate) +{ + u32 delta; + + /* This was copied from the trident driver, but it seems its gotten + * around a bit... nevertheless, it works well. + * + * We special case 44100 and 8000 since rounding with the equation + * does not give us an accurate enough value. For 11025 and 22050 + * the equation gives us the best answer. All other frequencies will + * also use the equation. JDW + */ + if (rate == 44100) + delta = 0xeb3; + else if (rate == 8000) + delta = 0x2ab; + else if (rate == 48000) + delta = 0x1000; + else + delta = (((rate << 12) + 24000) / 48000) & 0x0000ffff; + return delta; +} + +static void __sis_map_silence(struct sis7019 *sis) +{ + /* Helper function: must hold sis->voice_lock on entry */ + if (!sis->silence_users) + sis->silence_dma_addr = pci_map_single(sis->pci, + sis->suspend_state[0], + 4096, PCI_DMA_TODEVICE); + sis->silence_users++; +} + +static void __sis_unmap_silence(struct sis7019 *sis) +{ + /* Helper function: must hold sis->voice_lock on entry */ + sis->silence_users--; + if (!sis->silence_users) + pci_unmap_single(sis->pci, sis->silence_dma_addr, 4096, + PCI_DMA_TODEVICE); +} + +static void sis_free_voice(struct sis7019 *sis, struct voice *voice) +{ + unsigned long flags; + + spin_lock_irqsave(&sis->voice_lock, flags); + if (voice->timing) { + __sis_unmap_silence(sis); + voice->timing->flags = ~(VOICE_IN_USE | VOICE_SSO_TIMING | + VOICE_SYNC_TIMING); + voice->timing = NULL; + } + voice->flags &= ~(VOICE_IN_USE | VOICE_SSO_TIMING | VOICE_SYNC_TIMING); + spin_unlock_irqrestore(&sis->voice_lock, flags); +} + +static struct voice *__sis_alloc_playback_voice(struct sis7019 *sis) +{ + /* Must hold the voice_lock on entry */ + struct voice *voice; + int i; + + for (i = 0; i < 64; i++) { + voice = &sis->voices[i]; + if (voice->flags & VOICE_IN_USE) + continue; + voice->flags |= VOICE_IN_USE; + goto found_one; + } + voice = NULL; + +found_one: + return voice; +} + +static struct voice *sis_alloc_playback_voice(struct sis7019 *sis) +{ + struct voice *voice; + unsigned long flags; + + spin_lock_irqsave(&sis->voice_lock, flags); + voice = __sis_alloc_playback_voice(sis); + spin_unlock_irqrestore(&sis->voice_lock, flags); + + return voice; +} + +static int sis_alloc_timing_voice(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct sis7019 *sis = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct voice *voice = runtime->private_data; + unsigned int period_size, buffer_size; + unsigned long flags; + int needed; + + /* If there are one or two periods per buffer, we don't need a + * timing voice, as we can use the capture channel's interrupts + * to clock out the periods. + */ + period_size = params_period_size(hw_params); + buffer_size = params_buffer_size(hw_params); + needed = (period_size != buffer_size && + period_size != (buffer_size / 2)); + + if (needed && !voice->timing) { + spin_lock_irqsave(&sis->voice_lock, flags); + voice->timing = __sis_alloc_playback_voice(sis); + if (voice->timing) + __sis_map_silence(sis); + spin_unlock_irqrestore(&sis->voice_lock, flags); + if (!voice->timing) + return -ENOMEM; + voice->timing->substream = substream; + } else if (!needed && voice->timing) { + sis_free_voice(sis, voice); + voice->timing = NULL; + } + + return 0; +} + +static int sis_playback_open(struct snd_pcm_substream *substream) +{ + struct sis7019 *sis = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct voice *voice; + + voice = sis_alloc_playback_voice(sis); + if (!voice) + return -EAGAIN; + + voice->substream = substream; + runtime->private_data = voice; + runtime->hw = sis_playback_hw_info; + snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, + 9, 0xfff9); + snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, + 9, 0xfff9); + snd_pcm_set_sync(substream); + return 0; +} + +static int sis_substream_close(struct snd_pcm_substream *substream) +{ + struct sis7019 *sis = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct voice *voice = runtime->private_data; + + sis_free_voice(sis, voice); + return 0; +} + +static int sis_playback_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + return snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); +} + +static int sis_hw_free(struct snd_pcm_substream *substream) +{ + return snd_pcm_lib_free_pages(substream); +} + +static int sis_pcm_playback_prepare(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct voice *voice = runtime->private_data; + void __iomem *ctrl_base = voice->ctrl_base; + void __iomem *wave_base = voice->wave_base; + u32 format, dma_addr, control, sso_eso, delta, reg; + u16 leo; + + /* We rely on the PCM core to ensure that the parameters for this + * substream do not change on us while we're programming the HW. + */ + format = 0; + if (snd_pcm_format_width(runtime->format) == 8) + format |= SIS_PLAY_DMA_FORMAT_8BIT; + if (!snd_pcm_format_signed(runtime->format)) + format |= SIS_PLAY_DMA_FORMAT_UNSIGNED; + if (runtime->channels == 1) + format |= SIS_PLAY_DMA_FORMAT_MONO; + + /* The baseline setup is for a single period per buffer, and + * we add bells and whistles as needed from there. + */ + dma_addr = runtime->dma_addr; + leo = runtime->buffer_size - 1; + control = leo | SIS_PLAY_DMA_LOOP | SIS_PLAY_DMA_INTR_AT_LEO; + sso_eso = leo; + + if (runtime->period_size == (runtime->buffer_size / 2)) { + control |= SIS_PLAY_DMA_INTR_AT_MLP; + } else if (runtime->period_size != runtime->buffer_size) { + voice->flags |= VOICE_SSO_TIMING; + voice->sso = runtime->period_size - 1; + voice->period_size = runtime->period_size; + voice->buffer_size = runtime->buffer_size; + + control &= ~SIS_PLAY_DMA_INTR_AT_LEO; + control |= SIS_PLAY_DMA_INTR_AT_SSO; + sso_eso |= (runtime->period_size - 1) << 16; + } + + delta = sis_rate_to_delta(runtime->rate); + + /* Ok, we're ready to go, set up the channel. + */ + writel(format, ctrl_base + SIS_PLAY_DMA_FORMAT_CSO); + writel(dma_addr, ctrl_base + SIS_PLAY_DMA_BASE); + writel(control, ctrl_base + SIS_PLAY_DMA_CONTROL); + writel(sso_eso, ctrl_base + SIS_PLAY_DMA_SSO_ESO); + + for (reg = 0; reg < SIS_WAVE_SIZE; reg += 4) + writel(0, wave_base + reg); + + writel(SIS_WAVE_GENERAL_WAVE_VOLUME, wave_base + SIS_WAVE_GENERAL); + writel(delta << 16, wave_base + SIS_WAVE_GENERAL_ARTICULATION); + writel(SIS_WAVE_CHANNEL_CONTROL_FIRST_SAMPLE | + SIS_WAVE_CHANNEL_CONTROL_AMP_ENABLE | + SIS_WAVE_CHANNEL_CONTROL_INTERPOLATE_ENABLE, + wave_base + SIS_WAVE_CHANNEL_CONTROL); + + /* Force PCI writes to post. */ + readl(ctrl_base); + + return 0; +} + +static int sis_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct sis7019 *sis = snd_pcm_substream_chip(substream); + unsigned long io = sis->ioport; + struct snd_pcm_substream *s; + struct voice *voice; + void *chip; + int starting; + u32 record = 0; + u32 play[2] = { 0, 0 }; + + /* No locks needed, as the PCM core will hold the locks on the + * substreams, and the HW will only start/stop the indicated voices + * without changing the state of the others. + */ + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: + starting = 1; + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: + starting = 0; + break; + default: + return -EINVAL; + } + + snd_pcm_group_for_each_entry(s, substream) { + /* Make sure it is for us... */ + chip = snd_pcm_substream_chip(s); + if (chip != sis) + continue; + + voice = s->runtime->private_data; + if (voice->flags & VOICE_CAPTURE) { + record |= 1 << voice->num; + voice = voice->timing; + } + + /* voice could be NULL if this a recording stream, and it + * doesn't have an external timing channel. + */ + if (voice) + play[voice->num / 32] |= 1 << (voice->num & 0x1f); + + snd_pcm_trigger_done(s, substream); + } + + if (starting) { + if (record) + outl(record, io + SIS_RECORD_START_REG); + if (play[0]) + outl(play[0], io + SIS_PLAY_START_A_REG); + if (play[1]) + outl(play[1], io + SIS_PLAY_START_B_REG); + } else { + if (record) + outl(record, io + SIS_RECORD_STOP_REG); + if (play[0]) + outl(play[0], io + SIS_PLAY_STOP_A_REG); + if (play[1]) + outl(play[1], io + SIS_PLAY_STOP_B_REG); + } + return 0; +} + +static snd_pcm_uframes_t sis_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct voice *voice = runtime->private_data; + u32 cso; + + cso = readl(voice->ctrl_base + SIS_PLAY_DMA_FORMAT_CSO); + cso &= 0xffff; + return cso; +} + +static int sis_capture_open(struct snd_pcm_substream *substream) +{ + struct sis7019 *sis = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct voice *voice = &sis->capture_voice; + unsigned long flags; + + /* FIXME: The driver only supports recording from one channel + * at the moment, but it could support more. + */ + spin_lock_irqsave(&sis->voice_lock, flags); + if (voice->flags & VOICE_IN_USE) + voice = NULL; + else + voice->flags |= VOICE_IN_USE; + spin_unlock_irqrestore(&sis->voice_lock, flags); + + if (!voice) + return -EAGAIN; + + voice->substream = substream; + runtime->private_data = voice; + runtime->hw = sis_capture_hw_info; + runtime->hw.rates = sis->ac97[0]->rates[AC97_RATES_ADC]; + snd_pcm_limit_hw_rates(runtime); + snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, + 9, 0xfff9); + snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, + 9, 0xfff9); + snd_pcm_set_sync(substream); + return 0; +} + +static int sis_capture_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct sis7019 *sis = snd_pcm_substream_chip(substream); + int rc; + + rc = snd_ac97_set_rate(sis->ac97[0], AC97_PCM_LR_ADC_RATE, + params_rate(hw_params)); + if (rc) + goto out; + + rc = snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); + if (rc < 0) + goto out; + + rc = sis_alloc_timing_voice(substream, hw_params); + +out: + return rc; +} + +static void sis_prepare_timing_voice(struct voice *timing, struct voice *cap, + struct snd_pcm_runtime *runtime) +{ + u16 buffer_size, period_size; + u32 vperiod, sso; + + timing->flags |= VOICE_SYNC_TIMING; + timing->sync_base = cap->ctrl_base; + timing->sync_cso = runtime->period_size - 1; + timing->sync_period_size = runtime->period_size; + timing->sync_buffer_size = runtime->buffer_size; + + /* Set our initial buffer and period as large as we can given a + * single page of silence. + */ + buffer_size = 4096 / runtime->channels; + buffer_size /= snd_pcm_format_size(runtime->format, 1); + period_size = buffer_size; + + /* Initially, we want to interrupt just a bit behind the end of + * the period we're clocking out. 10 samples seems to give a good + * delay. + * + * We want to spread our interrupts throughout the virtual period, + * so that we don't end up with two interrupts back to back at the + * end -- this helps minimize the effects of any jitter. Adjust our + * clocking period size so that the last period is at least a fourth + * of a full period. + * + * This is all moot if we don't need to use virtual periods. + */ + vperiod = runtime->period_size + 10; + if (vperiod > period_size) { + u16 tail = vperiod % period_size; + u16 quarter_period = period_size / 4; + + if (tail && tail < quarter_period) { + u16 loops = vperiod / period_size; + + tail = quarter_period - tail; + tail += loops - 1; + tail /= loops; + period_size -= tail; + } + + sso = period_size - 1; + } else { + /* The initial period will fit inside the buffer, so we + * don't need to use virtual periods -- disable them. + */ + period_size = runtime->period_size; + sso = vperiod - 1; + vperiod = 0; + } + + timing->period_size = period_size; + timing->buffer_size = buffer_size; + timing->sso = sso; + timing->vperiod = vperiod; +} + +static int sis_pcm_capture_prepare(struct snd_pcm_substream *substream) +{ + struct sis7019 *sis = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct voice *voice = runtime->private_data; + struct voice *timing = voice->timing; + void __iomem *rec_base = voice->ctrl_base; + void __iomem *play_base = NULL; + void __iomem *wave_base = NULL; + u32 format, dma_addr, rec_ctrl; + u16 leo; + + /* The following variables are only used if there is a timing channel. + */ + u32 uninitialized_var(timing_ctrl); + u32 uninitialized_var(sso_eso); + u32 uninitialized_var(delta); + + /* We rely on the PCM core to ensure that the parameters for this + * substream do not change on us while we're programming the HW. + */ + format = 0; + if (snd_pcm_format_width(runtime->format) == 8) + format = SIS_CAPTURE_DMA_FORMAT_8BIT; + if (!snd_pcm_format_signed(runtime->format)) + format |= SIS_CAPTURE_DMA_FORMAT_UNSIGNED; + if (runtime->channels == 1) + format |= SIS_CAPTURE_DMA_FORMAT_MONO; + + dma_addr = runtime->dma_addr; + leo = runtime->buffer_size - 1; + rec_ctrl = leo | SIS_CAPTURE_DMA_LOOP; + if (timing) { + /* We're using a timing voice, so the capture voice will + * not need to generate interrupts. + */ + sis_prepare_timing_voice(timing, voice, runtime); + + timing_ctrl = timing->buffer_size - 1; + timing_ctrl |= SIS_PLAY_DMA_LOOP | SIS_PLAY_DMA_INTR_AT_SSO; + sso_eso = timing->buffer_size - 1;; + sso_eso |= timing->sso << 16; + + delta = sis_rate_to_delta(runtime->rate); + + play_base = timing->ctrl_base; + wave_base = timing->wave_base; + } else { + /* We've just got one or two periods, so we can use the + * capture voice's interrupt generation. + */ + rec_ctrl |= SIS_CAPTURE_DMA_INTR_AT_LEO; + if (runtime->period_size != runtime->buffer_size) + rec_ctrl |= SIS_CAPTURE_DMA_INTR_AT_MLP; + } + + /* We're ready to program the channel(s) + */ + writel(format, rec_base + SIS_CAPTURE_DMA_FORMAT_CSO); + writel(dma_addr, rec_base + SIS_CAPTURE_DMA_BASE); + writel(rec_ctrl, rec_base + SIS_CAPTURE_DMA_CONTROL); + + if (play_base) { + u32 reg; + + writel(format, play_base + SIS_PLAY_DMA_FORMAT_CSO); + writel(sis->silence_dma_addr, play_base + SIS_PLAY_DMA_BASE); + writel(timing_ctrl, play_base + SIS_PLAY_DMA_CONTROL); + writel(sso_eso, play_base + SIS_PLAY_DMA_SSO_ESO); + + for (reg = 0; reg < SIS_WAVE_SIZE; reg += 4) + writel(0, wave_base + reg); + + writel(SIS_WAVE_GENERAL_WAVE_VOLUME, + wave_base + SIS_WAVE_GENERAL); + writel(delta << 16, wave_base + SIS_WAVE_GENERAL_ARTICULATION); + writel(SIS_WAVE_CHANNEL_CONTROL_FIRST_SAMPLE | + SIS_WAVE_CHANNEL_CONTROL_AMP_ENABLE | + SIS_WAVE_CHANNEL_CONTROL_INTERPOLATE_ENABLE, + wave_base + SIS_WAVE_CHANNEL_CONTROL); + } + + /* Force the writes to post. */ + readl(rec_base); + + return 0; +} + +static struct snd_pcm_ops sis_playback_ops = { + .open = sis_playback_open, + .close = sis_substream_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = sis_playback_hw_params, + .hw_free = sis_hw_free, + .prepare = sis_pcm_playback_prepare, + .trigger = sis_pcm_trigger, + .pointer = sis_pcm_pointer, +}; + +static struct snd_pcm_ops sis_capture_ops = { + .open = sis_capture_open, + .close = sis_substream_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = sis_capture_hw_params, + .hw_free = sis_hw_free, + .prepare = sis_pcm_capture_prepare, + .trigger = sis_pcm_trigger, + .pointer = sis_pcm_pointer, +}; + +static int __devinit sis_pcm_create(struct sis7019 *sis) +{ + struct snd_pcm *pcm; + int rc; + + /* We have 64 voices, and the driver currently records from + * only one channel, though that could change in the future. + */ + rc = snd_pcm_new(sis->card, "SiS 7019", 0, 64, 1, &pcm); + if (rc) + return rc; + + pcm->private_data = sis; + strcpy(pcm->name, "SiS 7019"); + sis->pcm = pcm; + + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &sis_playback_ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &sis_capture_ops); + + /* Try to preallocate some memory, but it's not the end of the + * world if this fails. + */ + snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data(sis->pci), 64*1024, 128*1024); + + return 0; +} + +static unsigned short sis_ac97_rw(struct sis7019 *sis, int codec, u32 cmd) +{ + unsigned long io = sis->ioport; + unsigned short val = 0xffff; + u16 status; + u16 rdy; + int count; + const static u16 codec_ready[3] = { + SIS_AC97_STATUS_CODEC_READY, + SIS_AC97_STATUS_CODEC2_READY, + SIS_AC97_STATUS_CODEC3_READY, + }; + + rdy = codec_ready[codec]; + + + /* Get the AC97 semaphore -- software first, so we don't spin + * pounding out IO reads on the hardware semaphore... + */ + mutex_lock(&sis->ac97_mutex); + + count = 0xffff; + while ((inw(io + SIS_AC97_SEMA) & SIS_AC97_SEMA_BUSY) && --count) + udelay(1); + + if (!count) + goto timeout; + + /* ... and wait for any outstanding commands to complete ... + */ + count = 0xffff; + do { + status = inw(io + SIS_AC97_STATUS); + if ((status & rdy) && !(status & SIS_AC97_STATUS_BUSY)) + break; + + udelay(1); + } while (--count); + + if (!count) + goto timeout_sema; + + /* ... before sending our command and waiting for it to finish ... + */ + outl(cmd, io + SIS_AC97_CMD); + udelay(10); + + count = 0xffff; + while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count) + udelay(1); + + /* ... and reading the results (if any). + */ + val = inl(io + SIS_AC97_CMD) >> 16; + +timeout_sema: + outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); +timeout: + mutex_unlock(&sis->ac97_mutex); + + if (!count) { + printk(KERN_ERR "sis7019: ac97 codec %d timeout cmd 0x%08x\n", + codec, cmd); + } + + return val; +} + +static void sis_ac97_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) +{ + const static u32 cmd[3] = { + SIS_AC97_CMD_CODEC_WRITE, + SIS_AC97_CMD_CODEC2_WRITE, + SIS_AC97_CMD_CODEC3_WRITE, + }; + sis_ac97_rw(ac97->private_data, ac97->num, + (val << 16) | (reg << 8) | cmd[ac97->num]); +} + +static unsigned short sis_ac97_read(struct snd_ac97 *ac97, unsigned short reg) +{ + const static u32 cmd[3] = { + SIS_AC97_CMD_CODEC_READ, + SIS_AC97_CMD_CODEC2_READ, + SIS_AC97_CMD_CODEC3_READ, + }; + return sis_ac97_rw(ac97->private_data, ac97->num, + (reg << 8) | cmd[ac97->num]); +} + +static int __devinit sis_mixer_create(struct sis7019 *sis) +{ + struct snd_ac97_bus *bus; + struct snd_ac97_template ac97; + static struct snd_ac97_bus_ops ops = { + .write = sis_ac97_write, + .read = sis_ac97_read, + }; + int rc; + + memset(&ac97, 0, sizeof(ac97)); + ac97.private_data = sis; + + rc = snd_ac97_bus(sis->card, 0, &ops, NULL, &bus); + if (!rc && sis->codecs_present & SIS_PRIMARY_CODEC_PRESENT) + rc = snd_ac97_mixer(bus, &ac97, &sis->ac97[0]); + ac97.num = 1; + if (!rc && (sis->codecs_present & SIS_SECONDARY_CODEC_PRESENT)) + rc = snd_ac97_mixer(bus, &ac97, &sis->ac97[1]); + ac97.num = 2; + if (!rc && (sis->codecs_present & SIS_TERTIARY_CODEC_PRESENT)) + rc = snd_ac97_mixer(bus, &ac97, &sis->ac97[2]); + + /* If we return an error here, then snd_card_free() should + * free up any ac97 codecs that got created, as well as the bus. + */ + return rc; +} + +static void sis_free_suspend(struct sis7019 *sis) +{ + int i; + + for (i = 0; i < SIS_SUSPEND_PAGES; i++) + kfree(sis->suspend_state[i]); +} + +static int sis_chip_free(struct sis7019 *sis) +{ + /* Reset the chip, and disable all interrputs. + */ + outl(SIS_GCR_SOFTWARE_RESET, sis->ioport + SIS_GCR); + udelay(10); + outl(0, sis->ioport + SIS_GCR); + outl(0, sis->ioport + SIS_GIER); + + /* Now, free everything we allocated. + */ + if (sis->irq >= 0) + free_irq(sis->irq, sis); + + if (sis->ioaddr) + iounmap(sis->ioaddr); + + pci_release_regions(sis->pci); + pci_disable_device(sis->pci); + + sis_free_suspend(sis); + return 0; +} + +static int sis_dev_free(struct snd_device *dev) +{ + struct sis7019 *sis = dev->device_data; + return sis_chip_free(sis); +} + +static int sis_chip_init(struct sis7019 *sis) +{ + unsigned long io = sis->ioport; + void __iomem *ioaddr = sis->ioaddr; + u16 status; + int count; + int i; + + /* Reset the audio controller + */ + outl(SIS_GCR_SOFTWARE_RESET, io + SIS_GCR); + udelay(10); + outl(0, io + SIS_GCR); + + /* Get the AC-link semaphore, and reset the codecs + */ + count = 0xffff; + while ((inw(io + SIS_AC97_SEMA) & SIS_AC97_SEMA_BUSY) && --count) + udelay(1); + + if (!count) + return -EIO; + + outl(SIS_AC97_CMD_CODEC_COLD_RESET, io + SIS_AC97_CMD); + udelay(10); + + count = 0xffff; + while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count) + udelay(1); + + /* Now that we've finished the reset, find out what's attached. + */ + status = inl(io + SIS_AC97_STATUS); + if (status & SIS_AC97_STATUS_CODEC_READY) + sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC2_READY) + sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC3_READY) + sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; + + /* All done, let go of the semaphore, and check for errors + */ + outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); + if (!sis->codecs_present || !count) + return -EIO; + + /* Let the hardware know that the audio driver is alive, + * and enable PCM slots on the AC-link for L/R playback (3 & 4) and + * record channels. We're going to want to use Variable Rate Audio + * for recording, to avoid needlessly resampling from 48kHZ. + */ + outl(SIS_AC97_CONF_AUDIO_ALIVE, io + SIS_AC97_CONF); + outl(SIS_AC97_CONF_AUDIO_ALIVE | SIS_AC97_CONF_PCM_LR_ENABLE | + SIS_AC97_CONF_PCM_CAP_MIC_ENABLE | + SIS_AC97_CONF_PCM_CAP_LR_ENABLE | + SIS_AC97_CONF_CODEC_VRA_ENABLE, io + SIS_AC97_CONF); + + /* All AC97 PCM slots should be sourced from sub-mixer 0. + */ + outl(0, io + SIS_AC97_PSR); + + /* There is only one valid DMA setup for a PCI environment. + */ + outl(SIS_DMA_CSR_PCI_SETTINGS, io + SIS_DMA_CSR); + + /* Reset the syncronization groups for all of the channels + * to be asyncronous. If we start doing SPDIF or 5.1 sound, etc. + * we'll need to change how we handle these. Until then, we just + * assign sub-mixer 0 to all playback channels, and avoid any + * attenuation on the audio. + */ + outl(0, io + SIS_PLAY_SYNC_GROUP_A); + outl(0, io + SIS_PLAY_SYNC_GROUP_B); + outl(0, io + SIS_PLAY_SYNC_GROUP_C); + outl(0, io + SIS_PLAY_SYNC_GROUP_D); + outl(0, io + SIS_MIXER_SYNC_GROUP); + + for (i = 0; i < 64; i++) { + writel(i, SIS_MIXER_START_ADDR(ioaddr, i)); + writel(SIS_MIXER_RIGHT_NO_ATTEN | SIS_MIXER_LEFT_NO_ATTEN | + SIS_MIXER_DEST_0, SIS_MIXER_ADDR(ioaddr, i)); + } + + /* Don't attenuate any audio set for the wave amplifier. + * + * FIXME: Maximum attenuation is set for the music amp, which will + * need to change if we start using the synth engine. + */ + outl(0xffff0000, io + SIS_WEVCR); + + /* Ensure that the wave engine is in normal operating mode. + */ + outl(0, io + SIS_WECCR); + + /* Go ahead and enable the DMA interrupts. They won't go live + * until we start a channel. + */ + outl(SIS_GIER_AUDIO_PLAY_DMA_IRQ_ENABLE | + SIS_GIER_AUDIO_RECORD_DMA_IRQ_ENABLE, io + SIS_GIER); + + return 0; +} + +#ifdef CONFIG_PM +static int sis_suspend(struct pci_dev *pci, pm_message_t state) +{ + struct snd_card *card = pci_get_drvdata(pci); + struct sis7019 *sis = card->private_data; + void __iomem *ioaddr = sis->ioaddr; + int i; + + snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); + snd_pcm_suspend_all(sis->pcm); + if (sis->codecs_present & SIS_PRIMARY_CODEC_PRESENT) + snd_ac97_suspend(sis->ac97[0]); + if (sis->codecs_present & SIS_SECONDARY_CODEC_PRESENT) + snd_ac97_suspend(sis->ac97[1]); + if (sis->codecs_present & SIS_TERTIARY_CODEC_PRESENT) + snd_ac97_suspend(sis->ac97[2]); + + /* snd_pcm_suspend_all() stopped all channels, so we're quiescent. + */ + if (sis->irq >= 0) { + synchronize_irq(sis->irq); + free_irq(sis->irq, sis); + sis->irq = -1; + } + + /* Save the internal state away + */ + for (i = 0; i < 4; i++ ) { + memcpy_fromio(sis->suspend_state[i], ioaddr, 4096); + ioaddr += 4096; + } + + pci_disable_device(pci); + pci_save_state(pci); + pci_set_power_state(pci, pci_choose_state(pci, state)); + return 0; +} + +static int sis_resume(struct pci_dev *pci) +{ + struct snd_card *card = pci_get_drvdata(pci); + struct sis7019 *sis = card->private_data; + void __iomem *ioaddr = sis->ioaddr; + int i; + + pci_set_power_state(pci, PCI_D0); + pci_restore_state(pci); + + if (pci_enable_device(pci) < 0) { + printk(KERN_ERR "sis7019: unable to re-enable device\n"); + goto error; + } + + if (sis_chip_init(sis)) { + printk(KERN_ERR "sis7019: unable to re-init controller\n"); + goto error; + } + + if (request_irq(pci->irq, sis_interrupt, IRQF_DISABLED|IRQF_SHARED, + card->shortname, sis)) { + printk(KERN_ERR "sis7019: unable to regain IRQ %d\n", pci->irq); + goto error; + } + + /* Restore saved state, then clear out the page we use for the + * silence buffer. + */ + for (i = 0; i < 4; i++ ) { + memcpy_toio(ioaddr, sis->suspend_state[i], 4096); + ioaddr += 4096; + } + + memset(sis->suspend_state[0], 0, 4096); + + sis->irq = pci->irq; + pci_set_master(pci); + + if (sis->codecs_present & SIS_PRIMARY_CODEC_PRESENT) + snd_ac97_resume(sis->ac97[0]); + if (sis->codecs_present & SIS_SECONDARY_CODEC_PRESENT) + snd_ac97_resume(sis->ac97[1]); + if (sis->codecs_present & SIS_TERTIARY_CODEC_PRESENT) + snd_ac97_resume(sis->ac97[2]); + + snd_power_change_state(card, SNDRV_CTL_POWER_D0); + return 0; + +error: + snd_card_disconnect(card); + return -EIO; +} +#endif /* CONFIG_PM */ + +static int sis_alloc_suspend(struct sis7019 *sis) +{ + int i; + + /* We need 16K to store the internal wave engine state during a + * suspend, but we don't need it to be contiguous, so play nice + * with the memory system. We'll also use this area for a silence + * buffer. + */ + for (i = 0; i < SIS_SUSPEND_PAGES; i++) { + sis->suspend_state[i] = kmalloc(4096, GFP_KERNEL); + if (!sis->suspend_state[i]) + return -ENOMEM; + } + memset(sis->suspend_state[0], 0, 4096); + + return 0; +} + +static int __devinit sis_chip_create(struct snd_card *card, + struct pci_dev *pci) +{ + struct sis7019 *sis = card->private_data; + struct voice *voice; + static struct snd_device_ops ops = { + .dev_free = sis_dev_free, + }; + int rc; + int i; + + rc = pci_enable_device(pci); + if (rc) + goto error_out; + + if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0) { + printk(KERN_ERR "sis7019: architecture does not support " + "30-bit PCI busmaster DMA"); + goto error_out_enabled; + } + + memset(sis, 0, sizeof(*sis)); + mutex_init(&sis->ac97_mutex); + spin_lock_init(&sis->voice_lock); + sis->card = card; + sis->pci = pci; + sis->irq = -1; + sis->ioport = pci_resource_start(pci, 0); + + rc = pci_request_regions(pci, "SiS 7019"); + if (rc) { + printk(KERN_ERR "sis7019: unable request regions\n"); + goto error_out_enabled; + } + + rc = -EIO; + sis->ioaddr = ioremap_nocache(pci_resource_start(pci, 1), 0x4000); + if (!sis->ioaddr) { + printk(KERN_ERR "sis7019: unable to remap MMIO, aborting\n"); + goto error_out_cleanup; + } + + rc = sis_alloc_suspend(sis); + if (rc < 0) { + printk(KERN_ERR "sis7019: unable to allocate state storage\n"); + goto error_out_cleanup; + } + + rc = sis_chip_init(sis); + if (rc) + goto error_out_cleanup; + + if (request_irq(pci->irq, sis_interrupt, IRQF_DISABLED|IRQF_SHARED, + card->shortname, sis)) { + printk(KERN_ERR "unable to allocate irq %d\n", sis->irq); + goto error_out_cleanup; + } + + sis->irq = pci->irq; + pci_set_master(pci); + + for (i = 0; i < 64; i++) { + voice = &sis->voices[i]; + voice->num = i; + voice->ctrl_base = SIS_PLAY_DMA_ADDR(sis->ioaddr, i); + voice->wave_base = SIS_WAVE_ADDR(sis->ioaddr, i); + } + + voice = &sis->capture_voice; + voice->flags = VOICE_CAPTURE; + voice->num = SIS_CAPTURE_CHAN_AC97_PCM_IN; + voice->ctrl_base = SIS_CAPTURE_DMA_ADDR(sis->ioaddr, voice->num); + + rc = snd_device_new(card, SNDRV_DEV_LOWLEVEL, sis, &ops); + if (rc) + goto error_out_cleanup; + + snd_card_set_dev(card, &pci->dev); + + return 0; + +error_out_cleanup: + sis_chip_free(sis); + +error_out_enabled: + pci_disable_device(pci); + +error_out: + return rc; +} + +static int __devinit snd_sis7019_probe(struct pci_dev *pci, + const struct pci_device_id *pci_id) +{ + struct snd_card *card; + struct sis7019 *sis; + int rc; + + rc = -ENOENT; + if (!enable) + goto error_out; + + rc = -ENOMEM; + card = snd_card_new(index, id, THIS_MODULE, sizeof(*sis)); + if (!card) + goto error_out; + + strcpy(card->driver, "SiS 7019"); + strcpy(card->shortname, "SiS 7019"); + rc = sis_chip_create(card, pci); + if (rc) + goto card_error_out; + + sis = card->private_data; + + rc = sis_mixer_create(sis); + if (rc) + goto card_error_out; + + rc = sis_pcm_create(sis); + if (rc) + goto card_error_out; + + snprintf(card->longname, sizeof(card->longname), + "%s Audio Accelerator with %s at 0x%lx, irq %d", + card->shortname, snd_ac97_get_short_name(sis->ac97[0]), + sis->ioport, sis->irq); + + rc = snd_card_register(card); + if (rc) + goto card_error_out; + + pci_set_drvdata(pci, card); + return 0; + +card_error_out: + snd_card_free(card); + +error_out: + return rc; +} + +static void __devexit snd_sis7019_remove(struct pci_dev *pci) +{ + snd_card_free(pci_get_drvdata(pci)); + pci_set_drvdata(pci, NULL); +} + +static struct pci_driver sis7019_driver = { + .name = "SiS7019", + .id_table = snd_sis7019_ids, + .probe = snd_sis7019_probe, + .remove = __devexit_p(snd_sis7019_remove), + +#ifdef CONFIG_PM + .suspend = sis_suspend, + .resume = sis_resume, +#endif +}; + +static int __init sis7019_init(void) +{ + return pci_register_driver(&sis7019_driver); +} + +static void __exit sis7019_exit(void) +{ + pci_unregister_driver(&sis7019_driver); +} + +module_init(sis7019_init); +module_exit(sis7019_exit); diff -r eb09731e73d7 pci/sis7019.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/pci/sis7019.h Sat Dec 08 18:46:18 2007 -0500 @@ -0,0 +1,342 @@ +#ifndef __sis7019_h__ +#define __sis7019_h__ + +/* + * Definitions for SiS7019 Audio Accelerator + * + * Copyright (C) 2004-2007, David Dillow + * Written by David Dillow <dave(a)thedillows.org> + * Inspired by the Trident 4D-WaveDX/NX driver. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +/* General Control Register */ +#define SIS_GCR 0x00 +#define SIS_GCR_MACRO_POWER_DOWN 0x80000000 +#define SIS_GCR_MODEM_ENABLE 0x00010000 +#define SIS_GCR_SOFTWARE_RESET 0x00000001 + +/* General Interrupt Enable Register */ +#define SIS_GIER 0x04 +#define SIS_GIER_MODEM_TIMER_IRQ_ENABLE 0x00100000 +#define SIS_GIER_MODEM_RX_DMA_IRQ_ENABLE 0x00080000 +#define SIS_GIER_MODEM_TX_DMA_IRQ_ENABLE 0x00040000 +#define SIS_GIER_AC97_GPIO1_IRQ_ENABLE 0x00020000 +#define SIS_GIER_AC97_GPIO0_IRQ_ENABLE 0x00010000 +#define SIS_GIER_AC97_SAMPLE_TIMER_IRQ_ENABLE 0x00000010 +#define SIS_GIER_AUDIO_GLOBAL_TIMER_IRQ_ENABLE 0x00000008 +#define SIS_GIER_AUDIO_RECORD_DMA_IRQ_ENABLE 0x00000004 +#define SIS_GIER_AUDIO_PLAY_DMA_IRQ_ENABLE 0x00000002 +#define SIS_GIER_AUDIO_WAVE_ENGINE_IRQ_ENABLE 0x00000001 + +/* General Interrupt Status Register */ +#define SIS_GISR 0x08 +#define SIS_GISR_MODEM_TIMER_IRQ_STATUS 0x00100000 +#define SIS_GISR_MODEM_RX_DMA_IRQ_STATUS 0x00080000 +#define SIS_GISR_MODEM_TX_DMA_IRQ_STATUS 0x00040000 +#define SIS_GISR_AC97_GPIO1_IRQ_STATUS 0x00020000 +#define SIS_GISR_AC97_GPIO0_IRQ_STATUS 0x00010000 +#define SIS_GISR_AC97_SAMPLE_TIMER_IRQ_STATUS 0x00000010 +#define SIS_GISR_AUDIO_GLOBAL_TIMER_IRQ_STATUS 0x00000008 +#define SIS_GISR_AUDIO_RECORD_DMA_IRQ_STATUS 0x00000004 +#define SIS_GISR_AUDIO_PLAY_DMA_IRQ_STATUS 0x00000002 +#define SIS_GISR_AUDIO_WAVE_ENGINE_IRQ_STATUS 0x00000001 + +/* DMA Control Register */ +#define SIS_DMA_CSR 0x10 +#define SIS_DMA_CSR_PCI_SETTINGS 0x0000001d +#define SIS_DMA_CSR_CONCURRENT_ENABLE 0x00000200 +#define SIS_DMA_CSR_PIPELINE_ENABLE 0x00000100 +#define SIS_DMA_CSR_RX_DRAIN_ENABLE 0x00000010 +#define SIS_DMA_CSR_RX_FILL_ENABLE 0x00000008 +#define SIS_DMA_CSR_TX_DRAIN_ENABLE 0x00000004 +#define SIS_DMA_CSR_TX_LOWPRI_FILL_ENABLE 0x00000002 +#define SIS_DMA_CSR_TX_HIPRI_FILL_ENABLE 0x00000001 + +/* Playback Channel Start Registers */ +#define SIS_PLAY_START_A_REG 0x14 +#define SIS_PLAY_START_B_REG 0x18 + +/* Playback Channel Stop Registers */ +#define SIS_PLAY_STOP_A_REG 0x1c +#define SIS_PLAY_STOP_B_REG 0x20 + +/* Recording Channel Start Register */ +#define SIS_RECORD_START_REG 0x24 + +/* Recording Channel Stop Register */ +#define SIS_RECORD_STOP_REG 0x28 + +/* Playback Interrupt Status Registers */ +#define SIS_PISR_A 0x2c +#define SIS_PISR_B 0x30 + +/* Recording Interrupt Status Register */ +#define SIS_RISR 0x34 + +/* AC97 AC-link Playback Source Register */ +#define SIS_AC97_PSR 0x40 +#define SIS_AC97_PSR_MODEM_HEADSET_SRC_MIXER 0x0f000000 +#define SIS_AC97_PSR_MODEM_LINE2_SRC_MIXER 0x00f00000 +#define SIS_AC97_PSR_MODEM_LINE1_SRC_MIXER 0x000f0000 +#define SIS_AC97_PSR_PCM_LFR_SRC_MIXER 0x0000f000 +#define SIS_AC97_PSR_PCM_SURROUND_SRC_MIXER 0x00000f00 +#define SIS_AC97_PSR_PCM_CENTER_SRC_MIXER 0x000000f0 +#define SIS_AC97_PSR_PCM_LR_SRC_MIXER 0x0000000f + +/* AC97 AC-link Command Register */ +#define SIS_AC97_CMD 0x50 +#define SIS_AC97_CMD_DATA_MASK 0xffff0000 +#define SIS_AC97_CMD_REG_MASK 0x0000ff00 +#define SIS_AC97_CMD_CODEC3_READ 0x0000000d +#define SIS_AC97_CMD_CODEC3_WRITE 0x0000000c +#define SIS_AC97_CMD_CODEC2_READ 0x0000000b +#define SIS_AC97_CMD_CODEC2_WRITE 0x0000000a +#define SIS_AC97_CMD_CODEC_READ 0x00000009 +#define SIS_AC97_CMD_CODEC_WRITE 0x00000008 +#define SIS_AC97_CMD_CODEC_WARM_RESET 0x00000005 +#define SIS_AC97_CMD_CODEC_COLD_RESET 0x00000004 +#define SIS_AC97_CMD_DONE 0x00000000 + +/* AC97 AC-link Semaphore Register */ +#define SIS_AC97_SEMA 0x54 +#define SIS_AC97_SEMA_BUSY 0x00000001 +#define SIS_AC97_SEMA_RELEASE 0x00000000 + +/* AC97 AC-link Status Register */ +#define SIS_AC97_STATUS 0x58 +#define SIS_AC97_STATUS_AUDIO_D2_INACT_SECS 0x03f00000 +#define SIS_AC97_STATUS_MODEM_ALIVE 0x00002000 +#define SIS_AC97_STATUS_AUDIO_ALIVE 0x00001000 +#define SIS_AC97_STATUS_CODEC3_READY 0x00000400 +#define SIS_AC97_STATUS_CODEC2_READY 0x00000200 +#define SIS_AC97_STATUS_CODEC_READY 0x00000100 +#define SIS_AC97_STATUS_WARM_RESET 0x00000080 +#define SIS_AC97_STATUS_COLD_RESET 0x00000040 +#define SIS_AC97_STATUS_POWERED_DOWN 0x00000020 +#define SIS_AC97_STATUS_NORMAL 0x00000010 +#define SIS_AC97_STATUS_READ_EXPIRED 0x00000004 +#define SIS_AC97_STATUS_SEMAPHORE 0x00000002 +#define SIS_AC97_STATUS_BUSY 0x00000001 + +/* AC97 AC-link Audio Configuration Register */ +#define SIS_AC97_CONF 0x5c +#define SIS_AC97_CONF_AUDIO_ALIVE 0x80000000 +#define SIS_AC97_CONF_WARM_RESET_ENABLE 0x40000000 +#define SIS_AC97_CONF_PR6_ENABLE 0x20000000 +#define SIS_AC97_CONF_PR5_ENABLE 0x10000000 +#define SIS_AC97_CONF_PR4_ENABLE 0x08000000 +#define SIS_AC97_CONF_PR3_ENABLE 0x04000000 +#define SIS_AC97_CONF_PR2_PR7_ENABLE 0x02000000 +#define SIS_AC97_CONF_PR0_PR1_ENABLE 0x01000000 +#define SIS_AC97_CONF_AUTO_PM_ENABLE 0x00800000 +#define SIS_AC97_CONF_PCM_LFE_ENABLE 0x00080000 +#define SIS_AC97_CONF_PCM_SURROUND_ENABLE 0x00040000 +#define SIS_AC97_CONF_PCM_CENTER_ENABLE 0x00020000 +#define SIS_AC97_CONF_PCM_LR_ENABLE 0x00010000 +#define SIS_AC97_CONF_PCM_CAP_MIC_ENABLE 0x00002000 +#define SIS_AC97_CONF_PCM_CAP_LR_ENABLE 0x00001000 +#define SIS_AC97_CONF_PCM_CAP_MIC_FROM_CODEC3 0x00000200 +#define SIS_AC97_CONF_PCM_CAP_LR_FROM_CODEC3 0x00000100 +#define SIS_AC97_CONF_CODEC3_PM_VRM 0x00000080 +#define SIS_AC97_CONF_CODEC_PM_VRM 0x00000040 +#define SIS_AC97_CONF_CODEC3_VRA_ENABLE 0x00000020 +#define SIS_AC97_CONF_CODEC_VRA_ENABLE 0x00000010 +#define SIS_AC97_CONF_CODEC3_PM_EAC 0x00000008 +#define SIS_AC97_CONF_CODEC_PM_EAC 0x00000004 +#define SIS_AC97_CONF_CODEC3_EXISTS 0x00000002 +#define SIS_AC97_CONF_CODEC_EXISTS 0x00000001 + +/* Playback Channel Sync Group registers */ +#define SIS_PLAY_SYNC_GROUP_A 0x80 +#define SIS_PLAY_SYNC_GROUP_B 0x84 +#define SIS_PLAY_SYNC_GROUP_C 0x88 +#define SIS_PLAY_SYNC_GROUP_D 0x8c +#define SIS_MIXER_SYNC_GROUP 0x90 + +/* Wave Engine Config and Control Register */ +#define SIS_WECCR 0xa0 +#define SIS_WECCR_TESTMODE_MASK 0x00300000 +#define SIS_WECCR_TESTMODE_NORMAL 0x00000000 +#define SIS_WECCR_TESTMODE_BYPASS_NSO_ALPHA 0x00100000 +#define SIS_WECCR_TESTMODE_BYPASS_FC 0x00200000 +#define SIS_WECCR_TESTMODE_BYPASS_WOL 0x00300000 +#define SIS_WECCR_RESONANCE_DELAY_MASK 0x00060000 +#define SIS_WECCR_RESONANCE_DELAY_NONE 0x00000000 +#define SIS_WECCR_RESONANCE_DELAY_FC_1F00 0x00020000 +#define SIS_WECCR_RESONANCE_DELAY_FC_1E00 0x00040000 +#define SIS_WECCR_RESONANCE_DELAY_FC_1C00 0x00060000 +#define SIS_WECCR_IGNORE_CHANNEL_PARMS 0x00010000 +#define SIS_WECCR_COMMAND_CHANNEL_ID_MASK 0x0003ff00 +#define SIS_WECCR_COMMAND_MASK 0x00000007 +#define SIS_WECCR_COMMAND_NONE 0x00000000 +#define SIS_WECCR_COMMAND_DONE 0x00000000 +#define SIS_WECCR_COMMAND_PAUSE 0x00000001 +#define SIS_WECCR_COMMAND_TOGGLE_VEG 0x00000002 +#define SIS_WECCR_COMMAND_TOGGLE_MEG 0x00000003 +#define SIS_WECCR_COMMAND_TOGGLE_VEG_MEG 0x00000004 + +/* Wave Engine Volume Control Register */ +#define SIS_WEVCR 0xa4 +#define SIS_WEVCR_LEFT_MUSIC_ATTENUATION_MASK 0xff000000 +#define SIS_WEVCR_RIGHT_MUSIC_ATTENUATION_MASK 0x00ff0000 +#define SIS_WEVCR_LEFT_WAVE_ATTENUATION_MASK 0x0000ff00 +#define SIS_WEVCR_RIGHT_WAVE_ATTENUATION_MASK 0x000000ff + +/* Wave Engine Interrupt Status Registers */ +#define SIS_WEISR_A 0xa8 +#define SIS_WEISR_B 0xac + + +/* Playback DMA parameters (paramter RAM) */ +#define SIS_PLAY_DMA_OFFSET 0x0000 +#define SIS_PLAY_DMA_SIZE 0x10 +#define SIS_PLAY_DMA_ADDR(addr, num) \ + ((num * SIS_PLAY_DMA_SIZE) + (addr) + SIS_PLAY_DMA_OFFSET) + +#define SIS_PLAY_DMA_FORMAT_CSO 0x00 +#define SIS_PLAY_DMA_FORMAT_UNSIGNED 0x00080000 +#define SIS_PLAY_DMA_FORMAT_8BIT 0x00040000 +#define SIS_PLAY_DMA_FORMAT_MONO 0x00020000 +#define SIS_PLAY_DMA_CSO_MASK 0x0000ffff +#define SIS_PLAY_DMA_BASE 0x04 +#define SIS_PLAY_DMA_CONTROL 0x08 +#define SIS_PLAY_DMA_STOP_AT_SSO 0x04000000 +#define SIS_PLAY_DMA_RELEASE 0x02000000 +#define SIS_PLAY_DMA_LOOP 0x01000000 +#define SIS_PLAY_DMA_INTR_AT_SSO 0x00080000 +#define SIS_PLAY_DMA_INTR_AT_ESO 0x00040000 +#define SIS_PLAY_DMA_INTR_AT_LEO 0x00020000 +#define SIS_PLAY_DMA_INTR_AT_MLP 0x00010000 +#define SIS_PLAY_DMA_LEO_MASK 0x0000ffff +#define SIS_PLAY_DMA_SSO_ESO 0x0c +#define SIS_PLAY_DMA_SSO_MASK 0xffff0000 +#define SIS_PLAY_DMA_ESO_MASK 0x0000ffff + +/* Capture DMA parameters (paramter RAM) */ +#define SIS_CAPTURE_DMA_OFFSET 0x0800 +#define SIS_CAPTURE_DMA_SIZE 0x10 +#define SIS_CAPTURE_DMA_ADDR(addr, num) \ + ((num * SIS_CAPTURE_DMA_SIZE) + (addr) + SIS_CAPTURE_DMA_OFFSET) + +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_0 0 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_1 1 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_2 2 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_3 3 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_4 4 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_5 5 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_6 6 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_7 7 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_8 8 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_9 9 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_10 10 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_11 11 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_12 12 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_13 13 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_14 14 +#define SIS_CAPTURE_CHAN_MIXER_ROUTE_BACK_15 15 +#define SIS_CAPTURE_CHAN_AC97_PCM_IN 16 +#define SIS_CAPTURE_CHAN_AC97_MIC_IN 17 +#define SIS_CAPTURE_CHAN_AC97_LINE1_IN 18 +#define SIS_CAPTURE_CHAN_AC97_LINE2_IN 19 +#define SIS_CAPTURE_CHAN_AC97_HANDSE_IN 20 + +#define SIS_CAPTURE_DMA_FORMAT_CSO 0x00 +#define SIS_CAPTURE_DMA_MONO_MODE_MASK 0xc0000000 +#define SIS_CAPTURE_DMA_MONO_MODE_AVG 0x00000000 +#define SIS_CAPTURE_DMA_MONO_MODE_LEFT 0x40000000 +#define SIS_CAPTURE_DMA_MONO_MODE_RIGHT 0x80000000 +#define SIS_CAPTURE_DMA_FORMAT_UNSIGNED 0x00080000 +#define SIS_CAPTURE_DMA_FORMAT_8BIT 0x00040000 +#define SIS_CAPTURE_DMA_FORMAT_MONO 0x00020000 +#define SIS_CAPTURE_DMA_CSO_MASK 0x0000ffff +#define SIS_CAPTURE_DMA_BASE 0x04 +#define SIS_CAPTURE_DMA_CONTROL 0x08 +#define SIS_CAPTURE_DMA_STOP_AT_SSO 0x04000000 +#define SIS_CAPTURE_DMA_RELEASE 0x02000000 +#define SIS_CAPTURE_DMA_LOOP 0x01000000 +#define SIS_CAPTURE_DMA_INTR_AT_LEO 0x00020000 +#define SIS_CAPTURE_DMA_INTR_AT_MLP 0x00010000 +#define SIS_CAPTURE_DMA_LEO_MASK 0x0000ffff +#define SIS_CAPTURE_DMA_RESERVED 0x0c + + +/* Mixer routing list start pointer (parameter RAM) */ +#define SIS_MIXER_START_OFFSET 0x1000 +#define SIS_MIXER_START_SIZE 0x04 +#define SIS_MIXER_START_ADDR(addr, num) \ + ((num * SIS_MIXER_START_SIZE) + (addr) + SIS_MIXER_START_OFFSET) + +#define SIS_MIXER_START_MASK 0x0000007f + +/* Mixer routing table (parameter RAM) */ +#define SIS_MIXER_OFFSET 0x1400 +#define SIS_MIXER_SIZE 0x04 +#define SIS_MIXER_ADDR(addr, num) \ + ((num * SIS_MIXER_SIZE) + (addr) + SIS_MIXER_OFFSET) + +#define SIS_MIXER_RIGHT_ATTENUTATION_MASK 0xff000000 +#define SIS_MIXER_RIGHT_NO_ATTEN 0xff000000 +#define SIS_MIXER_LEFT_ATTENUTATION_MASK 0x00ff0000 +#define SIS_MIXER_LEFT_NO_ATTEN 0x00ff0000 +#define SIS_MIXER_NEXT_ENTRY_MASK 0x00007f00 +#define SIS_MIXER_NEXT_ENTRY_NONE 0x00000000 +#define SIS_MIXER_DEST_MASK 0x0000007f +#define SIS_MIXER_DEST_0 0x00000020 +#define SIS_MIXER_DEST_1 0x00000021 +#define SIS_MIXER_DEST_2 0x00000022 +#define SIS_MIXER_DEST_3 0x00000023 +#define SIS_MIXER_DEST_4 0x00000024 +#define SIS_MIXER_DEST_5 0x00000025 +#define SIS_MIXER_DEST_6 0x00000026 +#define SIS_MIXER_DEST_7 0x00000027 +#define SIS_MIXER_DEST_8 0x00000028 +#define SIS_MIXER_DEST_9 0x00000029 +#define SIS_MIXER_DEST_10 0x0000002a +#define SIS_MIXER_DEST_11 0x0000002b +#define SIS_MIXER_DEST_12 0x0000002c +#define SIS_MIXER_DEST_13 0x0000002d +#define SIS_MIXER_DEST_14 0x0000002e +#define SIS_MIXER_DEST_15 0x0000002f + +/* Wave Engine Control Parameters (parameter RAM) */ +#define SIS_WAVE_OFFSET 0x2000 +#define SIS_WAVE_SIZE 0x40 +#define SIS_WAVE_ADDR(addr, num) \ + ((num * SIS_WAVE_SIZE) + (addr) + SIS_WAVE_OFFSET) + +#define SIS_WAVE_GENERAL 0x00 +#define SIS_WAVE_GENERAL_WAVE_VOLUME 0x80000000 +#define SIS_WAVE_GENERAL_MUSIC_VOLUME 0x00000000 +#define SIS_WAVE_GENERAL_VOLUME_MASK 0x7f000000 +#define SIS_WAVE_GENERAL_ARTICULATION 0x04 +#define SIS_WAVE_GENERAL_ARTICULATION_DELTA_MASK 0x3fff0000 +#define SIS_WAVE_ARTICULATION 0x08 +#define SIS_WAVE_TIMER 0x0c +#define SIS_WAVE_GENERATOR 0x10 +#define SIS_WAVE_CHANNEL_CONTROL 0x14 +#define SIS_WAVE_CHANNEL_CONTROL_FIRST_SAMPLE 0x80000000 +#define SIS_WAVE_CHANNEL_CONTROL_AMP_ENABLE 0x40000000 +#define SIS_WAVE_CHANNEL_CONTROL_FILTER_ENABLE 0x20000000 +#define SIS_WAVE_CHANNEL_CONTROL_INTERPOLATE_ENABLE 0x10000000 +#define SIS_WAVE_LFO_EG_CONTROL 0x18 +#define SIS_WAVE_LFO_EG_CONTROL_2 0x1c +#define SIS_WAVE_LFO_EG_CONTROL_3 0x20 +#define SIS_WAVE_LFO_EG_CONTROL_4 0x24 + +#endif /* __sis7019_h__ */

2 3

[alsa-devel] [PATCH 2/2] sis7019: add support for pre-2.6 kernels
by Dave Dillow 13 Dec '07

13 Dec '07

The sis7019 driver uses __ffs(), which is available in 2.6 kernels, but not in most earlier ones. This patches the driver to use a local version assembly version, as the hardware is SiS 55x only (i486/Pentium-ish). Signed-off-by: David Dillow <dave(a)thedillows.org> --- This is against the alsa-driver hg repo. It has been compiled and tested under 2.6.23. pci/sis7019.patch | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ pci/Makefile | 3 ++- 2 files changed, 54 insertions(+), 1 deletion(-) diff -r 9eda190b55c3 pci/Makefile --- a/pci/Makefile Tue Dec 04 12:46:46 2007 +0100 +++ b/pci/Makefile Sat Dec 08 18:45:46 2007 -0500 @@ -10,7 +10,7 @@ include $(SND_TOPDIR)/Makefile.conf # clean-files := ad1889.c atiixp.c atiixp_modem.c bt87x.c cmipci.c ens1370.c \ - fm801.c intel8x0.c maestro3.c via82xx.c via82xx_modem.c + fm801.c intel8x0.c maestro3.c sis7019.c via82xx.c via82xx_modem.c obj-$(CONFIG_SND) += pdplus/ asihpi/ oxygen/ @@ -31,5 +31,6 @@ fm801.c: fm801.patch $(SND_TOPDIR)/alsa- fm801.c: fm801.patch $(SND_TOPDIR)/alsa-kernel/pci/fm801.c intel8x0.c: intel8x0.patch $(SND_TOPDIR)/alsa-kernel/pci/intel8x0.c maestro3.c: maestro3.patch $(SND_TOPDIR)/alsa-kernel/pci/maestro3.c +sis7019.c: sis7019.patch $(SND_TOPDIR)/alsa-kernel/pci/sis7019.c via82xx.c: via82xx.patch $(SND_TOPDIR)/alsa-kernel/pci/via82xx.c via82xx_modem.c: via82xx_modem.patch $(SND_TOPDIR)/alsa-kernel/pci/via82xx_modem.c diff -r 9eda190b55c3 pci/sis7019.patch --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/pci/sis7019.patch Sat Dec 08 18:45:46 2007 -0500 @@ -0,0 +1,52 @@ +--- sis7019.c.orig 2007-12-08 18:32:09.000000000 -0500 ++++ sis7019.c 2007-12-08 18:31:35.000000000 -0500 +@@ -31,7 +31,17 @@ + #include <sound/core.h> + #include <sound/ac97_codec.h> + #include <sound/initval.h> +-#include "sis7019.h" ++#include "../alsa-kernel/pci/sis7019.h" ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ++static inline unsigned long sis_ffs(unsigned long word) ++{ ++ __asm__("bsfl %1,%0" ++ :"=r" (word) ++ :"rm" (word)); ++ return word; ++} ++#endif + + MODULE_AUTHOR("David Dillow <dave(a)thedillows.org>"); + MODULE_DESCRIPTION("SiS 7019"); +@@ -290,7 +300,11 @@ + int bit; + + while (status) { ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ++ bit = sis_ffs(status); ++#else + bit = __ffs(status); ++#endif + status >>= bit + 1; + voice += bit; + sis_update_voice(voice); +@@ -791,9 +805,9 @@ + + /* The following variables are only used if there is a timing channel. + */ +- u32 uninitialized_var(timing_ctrl); +- u32 uninitialized_var(sso_eso); +- u32 uninitialized_var(delta); ++ u32 timing_ctrl = 0; ++ u32 sso_eso = 0; ++ u32 delta = 0; + + /* We rely on the PCM core to ensure that the parameters for this + * substream do not change on us while we're programming the HW. +@@ -1460,3 +1474,5 @@ + + module_init(sis7019_init); + module_exit(sis7019_exit); ++ ++EXPORT_NO_SYMBOLS

3 5

[alsa-devel] ALSA external control plugin question
by Ben C 13 Dec '07

13 Dec '07

Hi, I have a newbie question. I'm trying to understand how the external control plugin fits into the picture. I have an external PCM plugin that does some audio processing before sending it to the slave audio device. And I want to control the behavior of the processing with this control plugin. So before any playback is happening, any setting changes via the control plugin need to be stored somewhere, so when playback happens, it could be used. Also during playback, the control plugin needs to find and talk to the PCM plugin so settings could be changed during playback. Is there some sort of internal mechanism that allows this type of setting storage/retrieval and communication between control & PCM plugins to happen, or do I have to roll my own outside of ALSA? I've tried to find examples, I've found the pulse control and maemo in the alsa-plugin tarball. But they both seem to use some sort of external server/device. What I'm looking for is ways to control an external PCM plugin that simply runs some audio processing algorithm, there's no additional server or device associated with it (well, just the slave, which would be specified in the config). Currently I have the PCM plugin working, but it can only read the settings from the alsa config file. Once playback starts it'll stick with the original settings. I also have the basics of the external control plugin working, but the controls currently don't do anything, since I don't know how to propagate the changes to the PCM plugin. I've been searching on the web but haven't found much. I'm willing to buy books too, but I can't seem to find books on ALSA. I would appreciate any explanation, pointers to documents, or even just pointing me to existing source code that has done this. Thank you for your time and your help. ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

2 1

[alsa-devel] [PATCH] hda-intel: Enable Analog CD Input from internal ATAPI connector on Asus M2N-SLI.
by Johannes Stezenbach 13 Dec '07

13 Dec '07

Hi, the internal CD connector on my Asus M2N-SLI Deluxe board doesn't work without the patch below, /proc/asound/card0/codec#0 shows that the pin is disabled (Pin-ctls: 0x00). I used kernel linux-2.6.24-rc4-190-g94545ba from Linus' git tree. During my experiments I found that loading the snd-hda-intel driver with model=auto also enables the CD connector. It seems that for my board (BIOS version 1102) the BIOS configuration is correct and the "Asus M2N-SLI" quirk shouldn't be necessary? I get the following debug output: ALSA sound/pci/hda/hda_intel.c:727: codec_mask = 0x1 ALSA sound/pci/hda/hda_codec.c:2140: hda_codec: model 'auto' is selected ALSA sound/pci/hda/hda_codec.c:2760: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) ALSA sound/pci/hda/hda_codec.c:2764: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2768: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2776: inputs: mic=0x17, fmic=0x14, line=0x15, fline=0x0, cd=0x18, aux=0x0 (which matches the board's actual connections) Anyway, if you think the patch below is correct the please apply. It works fine for me. There is one thing that I don't get however: If I run aplay it creates an additional "PCM" mixer control, which however doesn't have any effect. I guess this is intended for softvol, but I don't need it. How do I stop aplay from creating this control? (If it matters, I use Debian unstable, alsa-lib 1.0.15.) Thanks, Johannes --- Enable Analog CD Input from internal ATAPI connector on Asus M2N-SLI. Signed-off-by: Johannes Stezenbach <js(a)sig21.net> diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 196ad3c..8c2aff4 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -2079,6 +2079,8 @@ static struct hda_verb ad1988_6stack_init_verbs[] = { {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x3c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x34, AC_VERB_SET_CONNECT_SEL, 0x0}, + /* Analog CD Input */ + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, { } };

2 1

[alsa-devel] [PATCH] hda: Added STAC92HD73 support.
by Matthew Ranostay 13 Dec '07

13 Dec '07

Added support for new STAC92HD73 family of codecs. Additionally added features for multiple analog loopbacks, and multiple dmux mixers. Regression testing for the analog loopback changes for STAC9205 and STAC9274D completed with any issues, as well for the dmux changes. --- Signed-off-by: Matthew Ranostay <mranostay(a)embeddedalley.com> diff -r eb09731e73d7 pci/hda/patch_sigmatel.c --- a/pci/hda/patch_sigmatel.c Mon Dec 03 17:08:40 2007 +0100 +++ b/pci/hda/patch_sigmatel.c Tue Dec 04 11:28:40 2007 -0500 @@ -62,6 +62,11 @@ enum { }; enum { + STAC_92HD73XX_REF, + STAC_92HD73XX_MODELS +}; + +enum { STAC_92HD71BXX_REF, STAC_92HD71BXX_MODELS }; @@ -118,6 +123,7 @@ struct sigmatel_spec { unsigned int gpio_mute: 1; unsigned int gpio_mask, gpio_data; + unsigned int aloopback_mask; /* playback */ struct hda_multi_out multiout; @@ -130,7 +136,7 @@ struct sigmatel_spec { unsigned int num_muxes; hda_nid_t *dmic_nids; unsigned int num_dmics; - hda_nid_t dmux_nid; + hda_nid_t *dmux_nids; hda_nid_t dig_in_nid; /* pin widgets */ @@ -145,7 +151,7 @@ struct sigmatel_spec { /* capture source */ struct hda_input_mux *dinput_mux; - unsigned int cur_dmux; + unsigned int cur_dmux[2]; struct hda_input_mux *input_mux; unsigned int cur_mux[3]; @@ -176,12 +182,38 @@ static hda_nid_t stac9200_dac_nids[1] = 0x02, }; +static hda_nid_t stac92hd73xx_adc_nids[2] = { + 0x1a, 0x1b +}; + +#define STAC92HD73XX_NUM_DMICS 2 +static hda_nid_t stac92hd73xx_dmic_nids[STAC92HD73XX_NUM_DMICS + 1] = { + 0x13, 0x14, 0 +}; + +#define STAC92HD73_DAC_COUNT 5 +static hda_nid_t stac92hd73xx_dac_nids[STAC92HD73_DAC_COUNT] = { + 0x15, 0x16, 0x17, 0x18, 0x19, +}; + +static hda_nid_t stac92hd73xx_mux_nids[4] = { + 0x28, 0x29, 0x2a, 0x2b, +}; + +static hda_nid_t stac92hd73xx_dmux_nids[2] = { + 0x20, 0x21, +}; + static hda_nid_t stac92hd71bxx_adc_nids[2] = { 0x12, 0x13, }; static hda_nid_t stac92hd71bxx_mux_nids[2] = { 0x1a, 0x1b +}; + +static hda_nid_t stac92hd71bxx_dmux_nids[1] = { + 0x1c, }; static hda_nid_t stac92hd71bxx_dac_nids[2] = { @@ -226,6 +258,10 @@ static hda_nid_t stac927x_mux_nids[3] = 0x15, 0x16, 0x17 }; +static hda_nid_t stac927x_dmux_nids[1] = { + 0x1b, +}; + #define STAC927X_NUM_DMICS 2 static hda_nid_t stac927x_dmic_nids[STAC927X_NUM_DMICS + 1] = { 0x13, 0x14, 0 @@ -239,6 +275,10 @@ static hda_nid_t stac9205_mux_nids[2] = 0x19, 0x1a }; +static hda_nid_t stac9205_dmux_nids[1] = { + 0x1d, +}; + #define STAC9205_NUM_DMICS 2 static hda_nid_t stac9205_dmic_nids[STAC9205_NUM_DMICS + 1] = { 0x17, 0x18, 0 @@ -257,6 +297,12 @@ static hda_nid_t stac922x_pin_nids[10] = static hda_nid_t stac922x_pin_nids[10] = { 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x15, 0x1b, +}; + +static hda_nid_t stac92hd73xx_pin_nids[12] = { + 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, + 0x0f, 0x10, 0x11, 0x12, 0x13, + 0x14, 0x22 }; static hda_nid_t stac92hd71bxx_pin_nids[10] = { @@ -289,8 +335,9 @@ static int stac92xx_dmux_enum_get(struct { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; - - ucontrol->value.enumerated.item[0] = spec->cur_dmux; + unsigned int dmux_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); + + ucontrol->value.enumerated.item[0] = spec->cur_dmux[dmux_idx]; return 0; } @@ -299,9 +346,10 @@ static int stac92xx_dmux_enum_put(struct { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; + unsigned int dmux_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); return snd_hda_input_mux_put(codec, spec->dinput_mux, ucontrol, - spec->dmux_nid, &spec->cur_dmux); + spec->dmux_nids[dmux_idx], &spec->cur_dmux[dmux_idx]); } static int stac92xx_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) @@ -337,9 +385,11 @@ static int stac92xx_aloopback_get(struct struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - struct sigmatel_spec *spec = codec->spec; - - ucontrol->value.integer.value[0] = spec->aloopback; + unsigned int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); + struct sigmatel_spec *spec = codec->spec; + + ucontrol->value.integer.value[0] = spec->aloopback & + (spec->aloopback_mask << idx); return 0; } @@ -348,24 +398,29 @@ static int stac92xx_aloopback_put(struct { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; + unsigned int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); unsigned int dac_mode; - unsigned int val; - + unsigned int val, idx_val; + + idx_val = (spec->aloopback_mask & 0xFF) << idx; val = !!ucontrol->value.integer.value[0]; - if (spec->aloopback == val) + if ((spec->aloopback | idx) == val) return 0; - spec->aloopback = val; - + spec->aloopback ^= idx_val; + + /* Only return the bits defined by the shift value of the + * first two bytes of the mask */ dac_mode = snd_hda_codec_read(codec, codec->afg, 0, - kcontrol->private_value & 0xFFFF, 0x0); - - if (spec->aloopback) { + kcontrol->private_value & 0xFFFF, 0x0) >> + ((spec->aloopback_mask & 0xFF00) >> 8); + + if (spec->aloopback & idx_val) { snd_hda_power_up(codec); - dac_mode |= 0x40; + dac_mode |= idx_val; } else { snd_hda_power_down(codec); - dac_mode &= ~0x40; + dac_mode &= ~idx_val; } snd_hda_codec_write_cache(codec, codec->afg, 0, @@ -384,6 +439,86 @@ static struct hda_verb stac9200_eapd_ini /* set dac0mux for dac converter */ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, + {} +}; + +static struct hda_verb stac92hd73xx_6ch_core_init[] = { + /* set master volume and direct control */ + { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, + /* setup audio connections */ + { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00}, + { 0x10, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x11, AC_VERB_SET_CONNECT_SEL, 0x02}, + /* setup adcs to point to mixer */ + { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b}, + { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b}, + { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Front Mic */ + { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Mic */ + { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Line In */ + { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + /* setup import muxs */ + { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x00}, + {} +}; + +static struct hda_verb stac92hd73xx_8ch_core_init[] = { + /* set master volume and direct control */ + { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, + /* setup audio connections */ + { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00}, + { 0x10, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x11, AC_VERB_SET_CONNECT_SEL, 0x02}, + /* connect hp ports to dac3 */ + { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x03}, + { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x03}, + /* setup adcs to point to mixer */ + { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b}, + { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b}, + { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Front Mic */ + { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Mic */ + { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Line In */ + { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + /* setup import muxs */ + { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x03}, + {} +}; + +static struct hda_verb stac92hd73xx_10ch_core_init[] = { + /* set master volume and direct control */ + { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, + /* setup audio connections */ + { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 }, + { 0x10, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { 0x11, AC_VERB_SET_CONNECT_SEL, 0x02 }, + /* dac3 is connected to import3 mux */ + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb07f}, + /* connect hp ports to dac4 */ + { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x04}, + { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x04}, + /* setup adcs to point to mixer */ + { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b}, + { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b}, + { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Front Mic */ + { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Mic */ + { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Line In */ + { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + /* setup import muxs */ + { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01}, + { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x03}, {} }; @@ -460,11 +595,11 @@ static struct hda_verb stac9205_core_ini .put = stac92xx_mux_enum_put, \ } -#define STAC_ANALOG_LOOPBACK(verb_read,verb_write) \ +#define STAC_ANALOG_LOOPBACK(verb_read, verb_write, cnt) \ { \ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = "Analog Loopback", \ - .count = 1, \ + .count = cnt, \ .info = stac92xx_aloopback_info, \ .get = stac92xx_aloopback_get, \ .put = stac92xx_aloopback_put, \ @@ -481,6 +616,99 @@ static struct snd_kcontrol_new stac9200_ { } /* end */ }; +static struct snd_kcontrol_new stac92hd73xx_6ch_mixer[] = { + STAC_DIGITAL_INPUT_SOURCE(2), + STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 3), + + /* hardware gain controls */ + HDA_CODEC_VOLUME_IDX("Digital Mic Volume", 0x0, 0x13, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME_IDX("Digital Mic Volume", 0x1, 0x14, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x21, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x21, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME("Front Mic Mixer Capture Volume", 0x1d, 0, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Mixer Capture Switch", 0x1d, 0, HDA_INPUT), + + HDA_CODEC_VOLUME("Mic Mixer Capture Volume", 0x1d, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("Mic Mixer Capture Switch", 0x1d, 0x1, HDA_INPUT), + + HDA_CODEC_VOLUME("Line In Mixer Capture Volume", 0x1d, 0x2, HDA_INPUT), + HDA_CODEC_MUTE("Line In Mixer Capture Switch", 0x1d, 0x2, HDA_INPUT), + + HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT), + HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT), + + HDA_CODEC_VOLUME("CD Mixer Capture Volume", 0x1d, 0x4, HDA_INPUT), + HDA_CODEC_MUTE("CD Mixer Capture Switch", 0x1d, 0x4, HDA_INPUT), + { } /* end */ +}; + +static struct snd_kcontrol_new stac92hd73xx_8ch_mixer[] = { + STAC_DIGITAL_INPUT_SOURCE(2), + STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 4), + + /* hardware gain controls */ + HDA_CODEC_VOLUME_IDX("Digital Mic Volume", 0x0, 0x13, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME_IDX("Digital Mic Volume", 0x1, 0x14, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x21, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x21, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME("Front Mic Mixer Capture Volume", 0x1d, 0, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Mixer Capture Switch", 0x1d, 0, HDA_INPUT), + + HDA_CODEC_VOLUME("Mic Mixer Capture Volume", 0x1d, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("Mic Mixer Capture Switch", 0x1d, 0x1, HDA_INPUT), + + HDA_CODEC_VOLUME("Line In Mixer Capture Volume", 0x1d, 0x2, HDA_INPUT), + HDA_CODEC_MUTE("Line In Mixer Capture Switch", 0x1d, 0x2, HDA_INPUT), + + HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT), + HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT), + + HDA_CODEC_VOLUME("CD Mixer Capture Volume", 0x1d, 0x4, HDA_INPUT), + HDA_CODEC_MUTE("CD Mixer Capture Switch", 0x1d, 0x4, HDA_INPUT), + { } /* end */ +}; + +static struct snd_kcontrol_new stac92hd73xx_10ch_mixer[] = { + STAC_DIGITAL_INPUT_SOURCE(2), + STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 5), + + /* hardware gain controls */ + HDA_CODEC_VOLUME_IDX("Digital Mic Volume", 0x0, 0x13, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME_IDX("Digital Mic Volume", 0x1, 0x14, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x21, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x21, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME("Front Mic Mixer Capture Volume", 0x1d, 0, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Mixer Capture Switch", 0x1d, 0, HDA_INPUT), + + HDA_CODEC_VOLUME("Mic Mixer Capture Volume", 0x1d, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("Mic Mixer Capture Switch", 0x1d, 0x1, HDA_INPUT), + + HDA_CODEC_VOLUME("Line In Mixer Capture Volume", 0x1d, 0x2, HDA_INPUT), + HDA_CODEC_MUTE("Line In Mixer Capture Switch", 0x1d, 0x2, HDA_INPUT), + + HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT), + HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT), + + HDA_CODEC_VOLUME("CD Mixer Capture Volume", 0x1d, 0x4, HDA_INPUT), + HDA_CODEC_MUTE("CD Mixer Capture Switch", 0x1d, 0x4, HDA_INPUT), + { } /* end */ +}; + static struct snd_kcontrol_new stac92hd71bxx_mixer[] = { STAC_DIGITAL_INPUT_SOURCE(1), STAC_INPUT_SOURCE(2), @@ -513,7 +741,7 @@ static struct snd_kcontrol_new stac9205_ static struct snd_kcontrol_new stac9205_mixer[] = { STAC_DIGITAL_INPUT_SOURCE(1), STAC_INPUT_SOURCE(2), - STAC_ANALOG_LOOPBACK(0xFE0, 0x7E0), + STAC_ANALOG_LOOPBACK(0xFE0, 0x7E0, 1), HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1b, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1d, 0x0, HDA_OUTPUT), @@ -543,7 +771,7 @@ static struct snd_kcontrol_new stac927x_ static struct snd_kcontrol_new stac927x_mixer[] = { STAC_DIGITAL_INPUT_SOURCE(1), STAC_INPUT_SOURCE(3), - STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB), + STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB, 1), HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x18, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1b, 0x0, HDA_OUTPUT), @@ -851,6 +1079,27 @@ static struct snd_pci_quirk stac925x_cfg SND_PCI_QUIRK(0x107b, 0x0461, "Gateway NX560XL", STAC_MA6), SND_PCI_QUIRK(0x107b, 0x0681, "Gateway NX860", STAC_PA6), SND_PCI_QUIRK(0x1002, 0x437b, "Gateway MX6453", STAC_M2_2), + {} /* terminator */ +}; + +static unsigned int ref92hd73xx_pin_configs[12] = { + 0x02214030, 0x02a19040, 0x01a19020, 0x02214030, + 0x0181302e, 0x01014010, 0x01014020, 0x01014030, + 0x02319040, 0x90a000f0, 0x90a000f0, 0x01452050, +}; + +static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = { + [STAC_92HD73XX_REF] = ref92hd73xx_pin_configs, +}; + +static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { + [STAC_92HD73XX_REF] = "ref", +}; + +static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { + /* SigmaTel reference board */ + SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, + "DFI LanParty", STAC_92HD73XX_REF), {} /* terminator */ }; @@ -2030,7 +2279,7 @@ static int stac92xx_auto_create_dmic_inp continue; num_cons = snd_hda_get_connections(codec, - spec->dmux_nid, + spec->dmux_nids[0], con_lst, HDA_MAX_NUM_INPUTS); for (j = 0; j < num_cons; j++) @@ -2211,7 +2460,8 @@ static int stac92xx_parse_auto_config(st spec->mixers[spec->num_mixers++] = spec->kctl_alloc; spec->input_mux = &spec->private_imux; - spec->dinput_mux = &spec->private_dimux; + if (!spec->dinput_mux) + spec->dinput_mux = &spec->private_dimux; return 1; } @@ -2686,6 +2936,111 @@ static int patch_stac925x(struct hda_cod } err = -EINVAL; } + if (err < 0) { + stac92xx_free(codec); + return err; + } + + codec->patch_ops = stac92xx_patch_ops; + + return 0; +} + +static struct hda_input_mux stac92hd73xx_dmux = { + .num_items = 4, + .items = { + { "Analog Inputs", 0x0b }, + { "CD", 0x08 }, + { "Digital Mic 1", 0x09 }, + { "Digital Mic 2", 0x0a }, + } +}; + +static int patch_stac92hd73xx(struct hda_codec *codec) +{ + struct sigmatel_spec *spec; + hda_nid_t conn[STAC92HD73_DAC_COUNT + 2]; + int err = 0; + + spec = kzalloc(sizeof(*spec), GFP_KERNEL); + if (spec == NULL) + return -ENOMEM; + + codec->spec = spec; + spec->num_pins = ARRAY_SIZE(stac92hd73xx_pin_nids); + spec->pin_nids = stac92hd73xx_pin_nids; + spec->board_config = snd_hda_check_board_config(codec, + STAC_92HD73XX_MODELS, + stac92hd73xx_models, + stac92hd73xx_cfg_tbl); +again: + if (spec->board_config < 0) { + snd_printdd(KERN_INFO "hda_codec: Unknown model for" + " STAC92HD73XX, using BIOS defaults\n"); + err = stac92xx_save_bios_config_regs(codec); + if (err < 0) { + stac92xx_free(codec); + return err; + } + spec->pin_configs = spec->bios_pin_configs; + } else { + spec->pin_configs = stac92hd73xx_brd_tbl[spec->board_config]; + stac92xx_set_config_regs(codec); + } + + spec->multiout.num_dacs = snd_hda_get_connections(codec, 0x0a, + conn, STAC92HD73_DAC_COUNT + 2) - 1; + + if (spec->multiout.num_dacs < 0) { + printk(KERN_WARNING "hda_codec: Could not determine " + "number of channels defaulting to DAC count\n"); + spec->multiout.num_dacs = STAC92HD73_DAC_COUNT; + } + + switch (spec->multiout.num_dacs) { + case 0x3: /* 6 Channel */ + spec->mixer = stac92hd73xx_6ch_mixer; + spec->init = stac92hd73xx_6ch_core_init; + break; + case 0x4: /* 8 Channel */ + spec->multiout.hp_nid = 0x18; + spec->mixer = stac92hd73xx_8ch_mixer; + spec->init = stac92hd73xx_8ch_core_init; + break; + case 0x5: /* 10 Channel */ + spec->multiout.hp_nid = 0x19; + spec->mixer = stac92hd73xx_10ch_mixer; + spec->init = stac92hd73xx_10ch_core_init; + }; + + spec->multiout.dac_nids = stac92hd73xx_dac_nids; + spec->aloopback_mask = 0x801; + + spec->mux_nids = stac92hd73xx_mux_nids; + spec->adc_nids = stac92hd73xx_adc_nids; + spec->dmic_nids = stac92hd73xx_dmic_nids; + spec->dmux_nids = stac92hd73xx_dmux_nids; + + spec->num_muxes = ARRAY_SIZE(stac92hd73xx_mux_nids); + spec->num_adcs = ARRAY_SIZE(stac92hd73xx_adc_nids); + spec->num_dmics = STAC92HD73XX_NUM_DMICS; + spec->dinput_mux = &stac92hd73xx_dmux; + /* GPIO0 High = Enable EAPD */ + spec->gpio_mask = spec->gpio_data = 0x000001; + stac92xx_enable_gpio_mask(codec); + + err = stac92xx_parse_auto_config(codec, 0x22, 0x24); + + if (!err) { + if (spec->board_config < 0) { + printk(KERN_WARNING "hda_codec: No auto-config is " + "available, default to model=ref\n"); + spec->board_config = STAC_92HD73XX_REF; + goto again; + } + err = -EINVAL; + } + if (err < 0) { stac92xx_free(codec); return err; @@ -2736,7 +3091,7 @@ again: spec->mux_nids = stac92hd71bxx_mux_nids; spec->adc_nids = stac92hd71bxx_adc_nids; spec->dmic_nids = stac92hd71bxx_dmic_nids; - spec->dmux_nid = 0x1c; + spec->dmux_nids = stac92hd71bxx_dmux_nids; spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids); spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids); @@ -2931,7 +3286,7 @@ static int patch_stac927x(struct hda_cod case 0x10280209: spec->dmic_nids = stac927x_dmic_nids; spec->num_dmics = STAC927X_NUM_DMICS; - spec->dmux_nid = 0x1b; + spec->dmux_nids = stac927x_dmux_nids; /* Enable DMIC0 */ stac92xx_set_config_reg(codec, 0x13, 0x90a60040); @@ -2947,6 +3302,7 @@ static int patch_stac927x(struct hda_cod } spec->multiout.dac_nids = spec->dac_nids; + spec->aloopback_mask = 0x40; stac92xx_enable_gpio_mask(codec); err = stac92xx_parse_auto_config(codec, 0x1e, 0x20); @@ -3004,11 +3360,12 @@ static int patch_stac9205(struct hda_cod spec->num_muxes = ARRAY_SIZE(stac9205_mux_nids); spec->dmic_nids = stac9205_dmic_nids; spec->num_dmics = STAC9205_NUM_DMICS; - spec->dmux_nid = 0x1d; + spec->dmux_nids = stac9205_dmux_nids; spec->init = stac9205_core_init; spec->mixer = stac9205_mixer; + spec->aloopback_mask = 0x40; spec->multiout.dac_nids = spec->dac_nids; switch (spec->board_config){ @@ -3337,6 +3694,8 @@ struct hda_codec_preset snd_hda_preset_s { .id = 0x838476a5, .name = "STAC9255D", .patch = patch_stac9205 }, { .id = 0x838476a6, .name = "STAC9254", .patch = patch_stac9205 }, { .id = 0x838476a7, .name = "STAC9254D", .patch = patch_stac9205 }, + { .id = 0x111d7676, .name = "92HD73E1X5", .patch = patch_stac92hd73xx }, + { .id = 0x111d7675, .name = "92HD73D1X5", .patch = patch_stac92hd73xx }, { .id = 0x111d76b0, .name = "92HD71BXX", .patch = patch_stac92hd71bxx }, {} /* terminator */ };

2 3

[alsa-devel] [patch 13/18] alsa: nopage
by npiggin＠suse.de 13 Dec '07

13 Dec '07

Convert ALSA from nopage to fault. Switch from OOM to SIGBUS if the resource is not available. Signed-off-by: Nick Piggin <npiggin(a)suse.de> Cc: perex(a)perex.cz Cc: tiwai(a)suse.de Cc: alsa-devel(a)alsa-project.org Cc: linux-kernel(a)vger.kernel.org --- sound/core/pcm_native.c | 59 ++++++++++++++++++++---------------------------- 1 file changed, 25 insertions(+), 34 deletions(-) Index: linux-2.6/sound/core/pcm_native.c =================================================================== --- linux-2.6.orig/sound/core/pcm_native.c +++ linux-2.6/sound/core/pcm_native.c @@ -3018,26 +3018,23 @@ static unsigned int snd_pcm_capture_poll /* * mmap status record */ -static struct page * snd_pcm_mmap_status_nopage(struct vm_area_struct *area, - unsigned long address, int *type) +static int snd_pcm_mmap_status_fault(struct vm_area_struct *area, + struct vm_fault *vmf) { struct snd_pcm_substream *substream = area->vm_private_data; struct snd_pcm_runtime *runtime; - struct page * page; if (substream == NULL) - return NOPAGE_SIGBUS; + return VM_FAULT_SIGBUS; runtime = substream->runtime; - page = virt_to_page(runtime->status); - get_page(page); - if (type) - *type = VM_FAULT_MINOR; - return page; + vmf->page = virt_to_page(runtime->status); + get_page(vmf->page); + return 0; } static struct vm_operations_struct snd_pcm_vm_ops_status = { - .nopage = snd_pcm_mmap_status_nopage, + .fault = snd_pcm_mmap_status_fault, }; static int snd_pcm_mmap_status(struct snd_pcm_substream *substream, struct file *file, @@ -3061,26 +3058,23 @@ static int snd_pcm_mmap_status(struct sn /* * mmap control record */ -static struct page * snd_pcm_mmap_control_nopage(struct vm_area_struct *area, - unsigned long address, int *type) +static int snd_pcm_mmap_control_fault(struct vm_area_struct *area, + struct vm_fault *vmf) { struct snd_pcm_substream *substream = area->vm_private_data; struct snd_pcm_runtime *runtime; - struct page * page; if (substream == NULL) - return NOPAGE_SIGBUS; + return VM_FAULT_SIGBUS; runtime = substream->runtime; - page = virt_to_page(runtime->control); - get_page(page); - if (type) - *type = VM_FAULT_MINOR; - return page; + vmf->page = virt_to_page(runtime->control); + get_page(vmf->page); + return 0; } static struct vm_operations_struct snd_pcm_vm_ops_control = { - .nopage = snd_pcm_mmap_control_nopage, + .fault = snd_pcm_mmap_control_fault, }; static int snd_pcm_mmap_control(struct snd_pcm_substream *substream, struct file *file, @@ -3117,10 +3111,10 @@ static int snd_pcm_mmap_control(struct s #endif /* coherent mmap */ /* - * nopage callback for mmapping a RAM page + * fault callback for mmapping a RAM page */ -static struct page *snd_pcm_mmap_data_nopage(struct vm_area_struct *area, - unsigned long address, int *type) +static int snd_pcm_mmap_data_fault(struct vm_area_struct *area, + struct vm_fault *vmf) { struct snd_pcm_substream *substream = area->vm_private_data; struct snd_pcm_runtime *runtime; @@ -3130,33 +3124,30 @@ static struct page *snd_pcm_mmap_data_no size_t dma_bytes; if (substream == NULL) - return NOPAGE_SIGBUS; + return VM_FAULT_SIGBUS; runtime = substream->runtime; - offset = area->vm_pgoff << PAGE_SHIFT; - offset += address - area->vm_start; - snd_assert((offset % PAGE_SIZE) == 0, return NOPAGE_SIGBUS); + offset = vmf->pgoff << PAGE_SHIFT; dma_bytes = PAGE_ALIGN(runtime->dma_bytes); if (offset > dma_bytes - PAGE_SIZE) - return NOPAGE_SIGBUS; + return VM_FAULT_SIGBUS; if (substream->ops->page) { page = substream->ops->page(substream, offset); - if (! page) - return NOPAGE_OOM; /* XXX: is this really due to OOM? */ + if (!page) + return VM_FAULT_SIGBUS; } else { vaddr = runtime->dma_area + offset; page = virt_to_page(vaddr); } get_page(page); - if (type) - *type = VM_FAULT_MINOR; - return page; + vmf->page = page; + return 0; } static struct vm_operations_struct snd_pcm_vm_ops_data = { .open = snd_pcm_mmap_data_open, .close = snd_pcm_mmap_data_close, - .nopage = snd_pcm_mmap_data_nopage, + .fault = snd_pcm_mmap_data_fault, }; /* --

2 1

[alsa-devel] [PATCH] Initial support of the Mitac 8252D (based on ALC883)
by Andy Shevchenko 13 Dec '07

13 Dec '07

Hi! The attached patch adds initial support of the Mitac 8252D (http://www.mitac-mtc.com.tw/English/products/8252Dspec.htm). Working: - Front speakers (volume + mute) - Center/LFE speakers (volume + mute) - HP out (with Front Volume) - HP individual mute switch - HP Jack sense - Front Mic and its volume Not tested: - external mic and its volume Not working while now: - Mic Jack sense Questionable: - is Mic have Jack sense? - one or two Mic volume controls? - CD/Line-in: presense in the mixer Signed-off-by: Andy Shevchenko <andy(a)smile.org.ua> --- alsa-kernel/pci/hda/patch_realtek.c.orig 2007-12-05 17:44:28.000000000 +0300 +++ alsa-kernel/pci/hda/patch_realtek.c 2007-12-05 20:16:46.000000000 +0300 @@ -185,6 +185,7 @@ ALC883_HAIER_W66, ALC888_6ST_HP, ALC888_3ST_HP, + ALC883_MITAC, ALC883_AUTO, ALC883_MODEL_LAST, }; @@ -6342,6 +6343,36 @@ { } /* end */ }; +static struct snd_kcontrol_new alc883_mitac_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), + HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + /* .name = "Capture Source", */ + .name = "Input Source", + .count = 2, + .info = alc883_mux_enum_info, + .get = alc883_mux_enum_get, + .put = alc883_mux_enum_put, + }, + { } /* end */ +}; + static struct snd_kcontrol_new alc883_3ST_2ch_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), @@ -6774,6 +6805,67 @@ { } }; +/* toggle speaker-output according to the hp-jack state */ +static void alc883_mitac_hp_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x15, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); + snd_hda_codec_amp_stereo(codec, 0x17, HDA_OUTPUT, 0, + HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0); +} + +/* auto-toggle front mic */ +/* +static void alc883_mitac_mic_automute(struct hda_codec *codec) +{ + unsigned int present; + unsigned char bits; + + present = snd_hda_codec_read(codec, 0x18, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + bits = present ? HDA_AMP_MUTE : 0; + snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits); +} +*/ + +static void alc883_mitac_automute(struct hda_codec *codec) +{ + alc883_mitac_hp_automute(codec); + /* alc883_mitac_mic_automute(codec); */ +} + +static void alc883_mitac_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + switch (res >> 26) { + case ALC880_HP_EVENT: + alc883_mitac_hp_automute(codec); + break; + case ALC880_MIC_EVENT: + /* alc883_mitac_mic_automute(codec); */ + break; + } +} + +static struct hda_verb alc883_mitac_verbs[] = { + /* HP */ + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Subwoofer */ + {0x17, AC_VERB_SET_CONNECT_SEL, 0x02}, + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + + /* enable unsolicited event */ + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + /* {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_MIC_EVENT | AC_USRSP_EN}, */ + + { } /* end */ +}; + static struct hda_verb alc883_tagra_verbs[] = { {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, @@ -7156,6 +7246,7 @@ [ALC883_HAIER_W66] = "haier-w66", [ALC888_6ST_HP] = "6stack-hp", [ALC888_3ST_HP] = "3stack-hp", + [ALC883_MITAC] = "mitac", [ALC883_AUTO] = "auto", }; @@ -7190,6 +7281,7 @@ SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION), + SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC), SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch), SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch), @@ -7437,6 +7529,19 @@ .need_dac_fix = 1, .input_mux = &alc883_capture_source, }, + [ALC883_MITAC] = { + .mixers = { alc883_mitac_mixer }, + .init_verbs = { alc883_init_verbs, alc883_mitac_verbs }, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), + .adc_nids = alc883_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), + .channel_mode = alc883_3ST_2ch_modes, + .input_mux = &alc883_capture_source, + .unsol_event = alc883_mitac_unsol_event, + .init_hook = alc883_mitac_automute, + }, }; -- With best regards, Andy Shevchenko. mailto: andy(a)smile.org.ua

3 5

[alsa-devel] [patch] Device ID for MSI L745
by zhejiang 13 Dec '07

13 Dec '07

Hi, Please refer to the [0003641] on bugtracking system. The user found that "model=targa-2ch-dig" works and provided the ID. diff -Nur a/alsa-driver-hg20071211/alsa-kernel/pci/hda/patch_realtek.c b/alsa-driver-hg20071211/alsa-kernel/pci/hda/patch_realtek.c --- a/alsa-driver-hg20071211/alsa-kernel/pci/hda/patch_realtek.c 2007-12-04 09:00:07.000000000 +0800 +++ b/alsa-driver-hg20071211/alsa-kernel/pci/hda/patch_realtek.c 2007-12-11 15:30:20.000000000 +0800 @@ -7173,6 +7173,7 @@ SND_PCI_QUIRK(0x1462, 0x7327, "MSI", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1462, 0x0349, "MSI", ALC883_TARGA_2ch_DIG), SND_PCI_QUIRK(0x1462, 0x0579, "MSI", ALC883_TARGA_2ch_DIG), + SND_PCI_QUIRK(0x1462, 0x040d, "MSI", ALC883_TARGA_2ch_DIG), SND_PCI_QUIRK(0x1462, 0x3729, "MSI S420", ALC883_TARGA_DIG), SND_PCI_QUIRK(0x1462, 0x3ef9, "MSI", ALC883_TARGA_DIG), SND_PCI_QUIRK(0x1462, 0x3b7f, "MSI", ALC883_TARGA_2ch_DIG),

2 1

[alsa-devel] [PATCH] 1616(M) cardbus improvements
by Ctirad Fertr 13 Dec '07

13 Dec '07

Hello, this patch improves E-Mu 1616(M) cardbus support. It adds definitions of the new Microdock and 1010 cardbus registers (thanks again for descriptions James) and improves mixer for this card. Now you can use S/PDIF and ADAT on Mirodock and also use headpohone output on host cardbus card as another independent output. Signed-off-by: Ctirad Fertr <c.fertr(a)gmail.com> ------ Ctirad

3 7

[alsa-devel] [PATCH] hda-codec - Fix definition of AC_KNBCAP_DELTA to match datasheet.
by Andrew Paprocki 13 Dec '07

13 Dec '07

hda-codec - Fix definition of AC_KNBCAP_DELTA to match datasheet. AC_KNBCAP_DELTA is incorrectly defined as (1<<8). According to the ALC883 datasheet rev 1.3, this is bit 7 after AC_KNBCAP_NUM_STEPS which is a 0x7f mask. Signed-off-by: Andrew Paprocki <andrew(a)ishiboo.com> diff -r da002fb740a42b4fd6dcbd45693f9bee3c828812 -r 65b577e690e95e4ace950c3f986270dd3e992192 pci/hda/hda_codec.h --- a/pci/hda/hda_codec.h Mon Dec 03 22:52:58 2007 -0500 +++ b/pci/hda/hda_codec.h Mon Dec 03 23:02:51 2007 -0500 @@ -238,7 +238,7 @@ enum { /* Volume knobs capabilities */ #define AC_KNBCAP_NUM_STEPS (0x7f<<0) -#define AC_KNBCAP_DELTA (1<<8) +#define AC_KNBCAP_DELTA (1<<7) /* * Control Parameters

2 1