- Alsa-devel - mailman.alsa-project.org

[alsa-devel] set_params:1073: not enough memory
by Michael Hirsch 13 Jan '09

13 Jan '09

Hello all, I'm trying to get alsa 1.0.18 working on a ARM PXA processor and I'm stuck with the following error message: aplay /Sinus.raw -fcd Playing raw data '/Sinus.raw' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo aplay: set_params:1073: not enough memory alsa kernel was compiled with alsa 1.0.16, alsa.conf, located in /usr/share/alsa is the basic: pcm.!default { type hw card 0 } ctl.!default { type hw card 0 } also aplay -l and alsaconf store show the message: ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0 However the card shows up /proc/asound/cards and alsamixer is able to access it. Any ideas? Best regards Michael

1 0

Re: [alsa-devel] Fixing the AICA driver
by Takashi Iwai 13 Jan '09

13 Jan '09

At Thu, 08 Jan 2009 18:50:46 +0000, Adrian McMenamin wrote: > > On Wed, 2009-01-07 at 12:02 +0100, Takashi Iwai wrote: > > > > > Could you try the git version? I thought I fixed the relevant bug recently. > > > > > > Takashi > > Hi Takashi - I assume you mean in the alssa-driver git, as I am using > the bleeding edge kernel stuff already? No, I mean alsa-lib. There is mmap_emul plugin in alsa-lib but it didn't work well. Takashi

2 1

[alsa-devel] Recorded frames sign 'error' after switchign to EABI kernel?
by Edwin van der Horst 13 Jan '09

13 Jan '09

Hello all, I'm using the ALSA API for quite some time now in my application, all worked fine until I switched to EABI kernel/compiler. My application reads signed 16 bit frames (S16_LE) using readi call: long FCAudio::readRecordedPCM(char * dest,int len) { .... frames = snd_pcm_readi(recHandle, dest, (len / asRec.bytesPS)); //read data hw .... .... } This worked fine on the non EABi kernel. After I switched to the EABI enabled kernel and compiler, I heard massive 'hiss/noise' on recorded audio. I took a dump of the recorded frames, and this came out: sample data: | ff | 58 | ff | e1 | ff | e2 | 0 | 0 | 0 | 48 | ff | e0 | ff | e3 | ff | e1 | 0 | 13 | ff | ca | ff | ae | 0 | 3 | ff | ee | ff | be| at first this seemed like correct data to me , but on a closer look the MSB(yte) is always 0x00 or 0xff I can't figure out why this is: I'm expecting 2 bytes of sample data, and in the current case I get 1 byte of correct data, and the other byte is only used for sign indication (0x00 or 0xFF). I can't figure out why this is, can anyone point me in the right direction? It's worth noting that arecord and aplay both work correctly, and using snd_pcm_dump(); I get settings as expedted and are correct. Thanks in advance... Edwin van der Horst

1 0

[alsa-devel] [PATCH - SB0500 2/2] rename "Device" to "Toshiba SB-0500" via quirks
by Andrea Borgia 13 Jan '09

13 Jan '09

Signed-off-by: Andrea Borgia <andrea(a)borgia.bo.it> diff --git a/usb/usbquirks.h b/usb/usbquirks.h index 9211575..d59323e 100644 --- a/usb/usbquirks.h +++ b/usb/usbquirks.h @@ -39,6 +39,16 @@ .idProduct = prod, \ .bInterfaceClass = USB_CLASS_VENDOR_SPEC +/* Creative/Toshiba Multimedia Center SB-0500 */ +{ + USB_DEVICE(0x041e, 0x3048), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Toshiba", + .product_name = "SB-0500", + .ifnum = QUIRK_NO_INTERFACE + } +}, + /* Creative/E-Mu devices */ { USB_DEVICE(0x041e, 0x3010), -- 1.5.4.3

2 2

[alsa-devel] [PATCH - SB-0500 1/1] preliminary support for Toshiba SB-0500
by Andrea Borgia 13 Jan '09

13 Jan '09

The Toshiba Multimedia Center SB-0500 is a rebranded version of the Creative Technology SB Live! 24-bit External: it shares the same chipset and only has minor cosmetic differences. Remote controller works with alsa_usb module, basic audio is there and mixer controls are mostly untested. Signed-off-by: Andrea Borgia <andrea(a)borgia.bo.it> --- diff --git a/usb/usbmixer.c b/usb/usbmixer.c index a492461..6490a74 100644 --- a/usb/usbmixer.c +++ b/usb/usbmixer.c @@ -66,6 +66,7 @@ static const struct rc_config { { USB_ID(0x041e, 0x3000), 0, 1, 2, 1, 18, 0x0013 }, /* Extigy */ { USB_ID(0x041e, 0x3020), 2, 1, 6, 6, 18, 0x0013 }, /* Audigy 2 NX */ { USB_ID(0x041e, 0x3040), 2, 2, 6, 6, 2, 0x6e91 }, /* Live! 24-bit */ + { USB_ID(0x041e, 0x3048), 2, 2, 6, 6, 2, 0x6e91 }, /* Toshiba SB0500 */ }; struct usb_mixer_interface { @@ -1706,7 +1707,8 @@ static void snd_usb_mixer_memory_change(struct usb_mixer_interface *mixer, break; /* live24ext: 4 = line-in jack */ case 3: /* hp-out jack (may actuate Mute) */ - if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) + if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040) || + mixer->chip->usb_id == USB_ID(0x041e, 0x3048)) snd_usb_mixer_notify_id(mixer, mixer->rc_cfg->mute_mixer_id); break; default: @@ -1957,8 +1959,9 @@ static int snd_audigy2nx_controls_create(struct usb_mixer_interface *mixer) int i, err; for (i = 0; i < ARRAY_SIZE(snd_audigy2nx_controls); ++i) { - if (i > 1 && /* Live24ext has 2 LEDs only */ - mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) + if (i > 1 && /* Live24ext has 2 LEDs only */ + (mixer->chip->usb_id == USB_ID(0x041e, 0x3040) || + mixer->chip->usb_id == USB_ID(0x041e, 0x3048))) break; err = snd_ctl_add(mixer->chip->card, snd_ctl_new1(&snd_audigy2nx_controls[i], mixer)); @@ -1995,7 +1998,8 @@ static void snd_audigy2nx_proc_read(struct snd_info_entry *entry, snd_iprintf(buffer, "%s jacks\n\n", mixer->chip->card->shortname); if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020)) jacks = jacks_audigy2nx; - else if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) + else if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040) || + mixer->chip->usb_id == USB_ID(0x041e, 0x3048)) jacks = jacks_live24ext; else return; @@ -2045,7 +2049,8 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif, goto _error; if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020) || - mixer->chip->usb_id == USB_ID(0x041e, 0x3040)) { + mixer->chip->usb_id == USB_ID(0x041e, 0x3040) || + mixer->chip->usb_id == USB_ID(0x041e, 0x3048)) { struct snd_info_entry *entry; if ((err = snd_audigy2nx_controls_create(mixer)) < 0) diff --git a/usb/usbmixer_maps.c b/usb/usbmixer_maps.c index d755be0..f41214f 100644 --- a/usb/usbmixer_maps.c +++ b/usb/usbmixer_maps.c @@ -285,6 +285,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = { .map = live24ext_map, }, { + .id = USB_ID(0x041e, 0x3048), + .map = audigy2nx_map, + .selector_map = audigy2nx_selectors, + }, + { /* Hercules DJ Console (Windows Edition) */ .id = USB_ID(0x06f8, 0xb000), .ignore_ctl_error = 1, -- 1.5.4.3 !DSPAM:49626d6b49731845111285!

2 8

[alsa-devel] 'node->type == SND_CONFIG_TYPE_COMPOUND' failed
by Michael Hirsch 12 Jan '09

12 Jan '09

Hello all, I'm trying to get alsa 1.0.16 working on a ARM PXA processor and I'm stuck with the following error message: aplay: conf.c: 3166: snd_config_iterator_first: Assertion `node->type == SND_CONFIG_TYPE_COMPOUND' failed. kernel version matches the user space library and utils version. searching the archives / google brings no result. We tried with an empty alsa.conf but then the message: ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM default aplay: main:564: audio open error: No such file or directory appears. However the card shows up /proc/asound/cards and alsamixer is able to access it. Any ideas? Best regards Michael

2 3

Re: [alsa-devel] [PATCH] wss-lib: move AD1845 frequency setting into wss-lib
by Krzysztof Helt 12 Jan '09

12 Jan '09

On Sun, 11 Jan 2009 08:28:13 -0500 "Theodore J. Allen" <tjallen(a)hws.edu> wrote: > The Soundscape Elite does work, but after a reboot > I noticed that there is an oddness in that there's > a little "pop" before playing sounds with aplay and > a series of short spike pops before the sound plays > with xmms, which uses the old oss interface. > I traced this and the "pop" sound is caused by two things: 1. Codec autocalibration every time a new sound is started (even when sound is muted it produces the "pop" on AD1848). 2. Muting sound on and off every autocalibration. The OSS code from the 2.4 kernel states that autocalibration produced that "pop" so it got disabled. This solves two problems at once as the muting on and off is not required then (and is not done in the code). I am not audiofile so I cannot comment how audible the lack of autocalibration is. Most codecs require it after they are powered up (and most of them except the oldest ones actually force it after powering up). One can autocalibrate the codec only once during a card/codec initialization. I can prepare a patch which disables the autocalibration. This is the only solution as I tested others like slow volume muting but all others still produce some noise. Regards, Krzysztof ----------------------------------------------------------------------- Promocja w Speak Up. Kwartal angielskiego za darmo. 3 miesiace nauki gratis. Sprawdz teraz! >> http://link.interia.pl/f2019

2 1

[alsa-devel] snd_usb_caiaq bug?
by Marco Santamaria 12 Jan '09

12 Jan '09

Hi, it's about one year that I'm using my Native Instruments Audio Kontrol 1 (USB2 audio/MIDI interface) only with audio applications and it has been working well so far. Now I'm trying to use it with Rosegarden (MIDI) and, as soon as I start Rosegarden, JACK crashes, the process jackd becomes "uninterruptible" and with the command dmesg I find the following new lines [ 1935.173876] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000044 [ 1935.173885] printing eip: f8a5f6fd *pde = 00000000 [ 1935.173891] Oops: 0000 [#1] PREEMPT SMP [ 1935.173896] Modules linked in: isofs udf ipv6 af_packet i915 drm rfcomm l2cap bluetooth ppdev acpi_cpufreq cpufreq_ondemand cpufreq_conservative cpufreq_stats freq_table cpufreq_userspace cpufreq_powersave dock container sbs sbshc iptable_filter ip_tables x_tables sbp2 parport_pc lp parport snd_hda_intel snd_usb_caiaq snd_hwdep snd_pcm_oss snd_mixer_oss arc4 snd_seq_oss snd_pcm ecb blkcipher snd_seq_midi snd_page_alloc joydev snd_rawmidi snd_seq_midi_event snd_seq iwl3945 sdhci serio_raw mmc_core iwlwifi_mac80211 video output cfg80211 battery led_class ac snd_timer snd_seq_device wmi_acer button snd evdev dcdbas iTCO_wdt iTCO_vendor_support intel_agp shpchp pci_hotplug pcspkr soundcore agpgart psmouse ext3 jbd mbcache sg sr_mod cdrom sd_mod b44 ata_generic ssb mii ohci1394 ieee1394 ata_piix pata_acpi libata scsi_mod ehci_hcd uhci_hcd usbcore thermal processor fan fuse [ 1935.173964] [ 1935.173967] Pid: 1421, comm: IRQ-18 Not tainted (2.6.24-19-rt #1) [ 1935.173970] EIP: 0060:[<f8a5f6fd>] EFLAGS: 00010292 CPU: 1 [ 1935.173979] EIP is at snd_rawmidi_transmit_peek+0x1d/0x100 [snd_rawmidi] [ 1935.173982] EAX: 00000000 EBX: f7106264 ECX: 0000003d EDX: f7106407 [ 1935.173985] ESI: ffffffea EDI: 00000000 EBP: f7106407 ESP: df85be38 [ 1935.173988] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 preempt:00000001 [ 1935.173991] Process IRQ-18 (pid: 1421, ti=df85a000 task=f7d45320 task.ti=df85a000) [ 1935.173993] Stack: 0000003d 00000000 f7106264 00000000 00000000 df83fc00 f8b8cc09 00000000 [ 1935.174000] f7106264 f710630c 00000000 df83fc00 df83fc00 f710630c f888c888 00000008 [ 1935.174007] df83fd08 00000000 f710630c f8870770 f728a0c0 f728a0c0 ffffff8d f721e180 [ 1935.174014] Call Trace: [ 1935.174021] [<f8b8cc09>] snd_usb_caiaq_midi_send+0x29/0x80 [snd_usb_caiaq] [ 1935.174034] [<f888c888>] usb_hcd_giveback_urb+0x48/0xc0 [usbcore] [ 1935.174064] [<f8870770>] ehci_urb_done+0x70/0xb0 [ehci_hcd] [ 1935.174075] [<f887153f>] qh_completions+0x24f/0x430 [ehci_hcd] [ 1935.174087] [<f8870770>] ehci_urb_done+0x70/0xb0 [ehci_hcd] [ 1935.174096] [<f887293e>] ehci_work+0x51e/0x810 [ehci_hcd] [ 1935.174103] [<c010b1e3>] sched_clock+0x13/0x40 [ 1935.174116] [<c0129199>] dequeue_task_rt+0xb9/0x1c0 [ 1935.174129] [<f8875498>] ehci_irq+0x158/0x1c0 [ehci_hcd] [ 1935.174142] [<f888cb7b>] usb_hcd_irq+0x2b/0x60 [usbcore] [ 1935.174166] [<c016a9cc>] handle_IRQ_event+0x5c/0x100 [ 1935.174178] [<c016b00a>] thread_simple_irq+0x4a/0x90 [ 1935.174185] [<c016b959>] do_irqd+0x229/0x290 [ 1935.174194] [<c016b730>] do_irqd+0x0/0x290 [ 1935.174199] [<c0141fc2>] kthread+0x42/0x70 [ 1935.174203] [<c0141f80>] kthread+0x0/0x70 [ 1935.174209] [<c0105857>] kernel_thread_helper+0x7/0x10 [ 1935.174217] ======================= [ 1935.174219] Code: 24 10 83 c4 14 c3 bf ea ff ff ff eb e3 90 83 ec 18 89 74 24 0c be ea ff ff ff 89 6c 24 14 89 d5 89 5c 24 08 89 7c 24 10 89 0c 24 <8b> 58 44 8b 7b 04 85 ff 0f 84 8e 00 00 00 8d 43 20 31 f6 89 44 [ 1935.174256] EIP: [<f8a5f6fd>] snd_rawmidi_transmit_peek+0x1d/0x100 [snd_rawmidi] SS:ESP 0068:df85be38 [ 1935.174265] ---[ end trace 9090d02b798b5496 ]--- I already asked to the Rosegarden and JACK people, but they couldn't help me: it seems to be a driver related problem, as I can happily use Rosegarden if I run JACK with the internal Intel sound card. The program versions I'm using are: jackd 0.116.1, rosegarden 1.7.2. Here's some other outputs: $ uname -a Linux din6400 2.6.24-19-rt #1 SMP PREEMPT RT Thu Aug 21 02:08:03 UTC 2008 i686 GNU/Linux $ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.17. Compiled on Jan 3 2009 for kernel 2.6.24-19-rt (SMP). $ grep VERSION_STR /usr/include/alsa/version.h #define SND_LIB_VERSION_STR "1.0.17a" $ aplay -l **** Lista di PLAYBACK dispositivi hardware **** scheda 0: Intel [HDA Intel], dispositivo 0: STAC92xx Analog [STAC92xx Analog] Sottoperiferiche: 1/1 Sottoperiferica #0: subdevice #0 scheda 0: Intel [HDA Intel], dispositivo 1: STAC92xx Digital [STAC92xx Digital] Sottoperiferiche: 1/1 Sottoperiferica #0: subdevice #0 scheda 1: A1 [Audio Kontrol 1], dispositivo 0: Audio Kontrol 1 [Audio Kontrol 1] Sottoperiferiche: 1/2 Sottoperiferica #0: subdevice #0 Sottoperiferica #1: subdevice #1 $ cat /proc/interrupts CPU0 CPU1 0: 5438968 0 IO-APIC-edge timer 1: 5123 0 IO-APIC-edge i8042 8: 7 0 IO-APIC-edge rtc 9: 2 0 IO-APIC-fasteoi acpi 12: 570309 0 IO-APIC-edge i8042 14: 16584 0 IO-APIC-edge libata 15: 7712 0 IO-APIC-edge libata 16: 312032 0 IO-APIC-fasteoi i915@pci:0000:00:02.0 17: 2 0 IO-APIC-fasteoi ohci1394 18: 269358 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5 19: 3999 0 IO-APIC-fasteoi uhci_hcd:usb2, HDA Intel 20: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 21: 0 0 IO-APIC-fasteoi uhci_hcd:usb4 22: 7638 0 IO-APIC-fasteoi eth0 23: 0 0 IO-APIC-fasteoi sdhci:slot0 221: 31667 0 PCI-MSI-edge iwl3945 NMI: 0 0 Non-maskable interrupts LOC: 266694 2894868 Local timer interrupts RES: 1091345 1871342 Rescheduling interrupts CAL: 12287 11042 function call interrupts TLB: 1395 1581 TLB shootdowns TRM: 0 0 Thermal event interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 I do not include the jackd and rosegarden outputs becouse they are quite long, but, if you think they are useful to understand what is going on, I can send them too. Any ideas? Thank you Marco

4 20

[alsa-devel] [PATCH] Bug in aplay/arecord --list-pcms
by Peter Stokes 12 Jan '09

12 Jan '09

Hi, I have just discovered a minor logic inversion bug in aplay/arecord --list-pcms functionality. Basically, executing "aplay --list-pcms" lists all devices capable of capture and executing "arecord --list-pcms" lists all devices capable of playback. Please find below a patch to resolve this issue. Best regards Peter Stokes ------------------------------------------------------------------------------- Signed-off-by: Peter Stokes <linux(a)dadeos.co.uk> diff --git a/aplay/aplay.c b/aplay/aplay.c index 2e14d2a..837e46a 100644 --- a/aplay/aplay.c +++ b/aplay/aplay.c @@ -287,7 +287,7 @@ static void pcm_list(void) name = snd_device_name_get_hint(*n, "NAME"); descr = snd_device_name_get_hint(*n, "DESC"); io = snd_device_name_get_hint(*n, "IOID"); - if (io != NULL && strcmp(io, filter) == 0) + if (io != NULL && strcmp(io, filter) != 0) goto __end; printf("%s\n", name); if ((descr1 = descr) != NULL) {

2 1

[alsa-devel] [PATCH] ALSA: hda - add support for Intel DX58SO board
by Wu Fengguang 12 Jan '09

12 Jan '09

The Intel DX58SO board works fine with model ALC883_3ST_6ch_INTEL. Signed-off-by: Wu Fengguang <fengguang.wu(a)intel.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) --- mm.orig/sound/pci/hda/patch_realtek.c +++ mm/sound/pci/hda/patch_realtek.c @@ -8522,6 +8522,7 @@ static struct snd_pci_quirk alc883_cfg_t SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66), SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL), + SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch), {} };

2 1