- Alsa-devel - mailman.alsa-project.org

Specifying supported hw params (channels, format, etc.) by the plug plugin in alsa config?
by Pavel Hofman 27 Aug '24

27 Aug '24

Hi, Please is it possible to restrict the hw params space for the plug plugin by some alsa configuration, so that it reports/accepts only a specific number of channels/specific sample format? I was not able to figure it out, I apologize if it's trivial :-) Thanks a lot. With regards, Pavel.

2 4

[PATCH -next 0/4] ASoC: fix module autoloading
by Liao Chen 27 Aug '24

27 Aug '24

Hi all, This patchset aims to enable autoloading of some use modules. By registering MDT, the kernel is allowed to automatically bind modules to devices that match the specified compatible strings. Liao Chen (4): ASoC: intel: fix module autoloading ASoC: google: fix module autoloading ASoC: tda7419: fix module autoloading ASoC: fix module autoloading sound/soc/codecs/chv3-codec.c | 1 + sound/soc/codecs/tda7419.c | 1 + sound/soc/google/chv3-i2s.c | 1 + sound/soc/intel/keembay/kmb_platform.c | 1 + 4 files changed, 4 insertions(+) -- 2.34.1

1 0

[PATCH v2] ASoC: tas2781: replace devm_kzalloc and scnprintf with devm_kstrdup
by Shenghao Ding 26 Aug '24

26 Aug '24

Replace devm_kzalloc and scnprintf with devm_kstrdup. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - use devm_kstrdup instead of devm_kasprintf --- sound/soc/codecs/tas2781-i2c.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index eb8732b1bb99..59fcce7fef7b 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -346,13 +346,11 @@ static int tasdevice_create_control(struct tasdevice_priv *tas_priv) } /* Create a mixer item for selecting the active profile */ - name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - GFP_KERNEL); + name = devm_kstrdup(tas_priv->dev, "Speaker Profile Id", GFP_KERNEL); if (!name) { ret = -ENOMEM; goto out; } - scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "Speaker Profile Id"); prof_ctrls[mix_index].name = name; prof_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; prof_ctrls[mix_index].info = tasdevice_info_profile; @@ -441,18 +439,13 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) goto out; } - /* Create a mixer item for selecting the active profile */ - prog_name = devm_kzalloc(tas_priv->dev, - SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); - conf_name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + /* Create mixer items for selecting the active Program and Config */ + prog_name = devm_kstrdup(tas_priv->dev, "Speaker Program Id", GFP_KERNEL); - if (!prog_name || !conf_name) { + if (!prog_name) { ret = -ENOMEM; goto out; } - - scnprintf(prog_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - "Speaker Program Id"); dsp_ctrls[mix_index].name = prog_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_programs; @@ -460,8 +453,12 @@ static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) dsp_ctrls[mix_index].put = tasdevice_program_put; mix_index++; - scnprintf(conf_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - "Speaker Config Id"); + conf_name = devm_kstrdup(tas_priv->dev, "Speaker Config Id", + GFP_KERNEL); + if (!conf_name) { + ret = -ENOMEM; + goto out; + } dsp_ctrls[mix_index].name = conf_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_configurations; -- 2.34.1

3 2

[PATCH] ASoC: MAINTAINERS: Drop incorrect tlv320aic31xx.txt path
by Krzysztof Kozlowski 26 Aug '24

26 Aug '24

tlv320aic31xx.txt was converted to DT schema (YAML) and new file is already matched by wildcard. This fixes get_maintainers.pl self-test warning: ./MAINTAINERS:22739: warning: no file matches F: Documentation/devicetree/bindings/sound/tlv320aic31xx.txt Fixes: e486feb7b8ec ("ASoC: dt-bindings: convert tlv320aic31xx.txt to yaml") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6574b4910f8a..028186bb4e8d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22736,7 +22736,6 @@ F: Documentation/devicetree/bindings/sound/ti,pcm1681.yaml F: Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml F: Documentation/devicetree/bindings/sound/ti,tlv320*.yaml F: Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml -F: Documentation/devicetree/bindings/sound/tlv320aic31xx.txt F: include/sound/tas2*.h F: include/sound/tlv320*.h F: include/sound/tpa6130a2-plat.h -- 2.43.0

2 1

[PATCH] MAINTAINERS: adjust file entries in TEXAS INSTRUMENTS AUDIO DRIVERS
by Lukas Bulwahn 26 Aug '24

26 Aug '24

From: Lukas Bulwahn <lukas.bulwahn(a)redhat.com> Commit e486feb7b8ec ("ASoC: dt-bindings: convert tlv320aic31xx.txt to yaml") converts tlv320aic31xx.txt to ti,tlv320dac3100.yaml, but misses to adjust the file entry in TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. The pattern ti,tlv320*.yaml in the section already covers ti,tlv320dac3100.yaml and ti,tlv320adcx140.yaml. So, further file entries in this section are redundant. Adjust the file entries in TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS accordingly. Signed-off-by: Lukas Bulwahn <lukas.bulwahn(a)redhat.com> --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5dd88c28c0f7..6aa85a43d8c1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22753,8 +22753,6 @@ F: Documentation/devicetree/bindings/sound/ti,tpa6130a2.yaml F: Documentation/devicetree/bindings/sound/ti,pcm1681.yaml F: Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml F: Documentation/devicetree/bindings/sound/ti,tlv320*.yaml -F: Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml -F: Documentation/devicetree/bindings/sound/tlv320aic31xx.txt F: include/sound/tas2*.h F: include/sound/tlv320*.h F: include/sound/tpa6130a2-plat.h -- 2.45.2

1 0

[PATCH v1] ASoC: tas2781: mark const variables tas2563_dvc_table as __maybe_unused
by Shenghao Ding 26 Aug '24

26 Aug '24

In case of tas2781, tas2563_dvc_table will be unused, so mark it as __maybe_unused. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- include/sound/tas2563-tlv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/sound/tas2563-tlv.h b/include/sound/tas2563-tlv.h index faa3e194f73b..bb269b21f460 100644 --- a/include/sound/tas2563-tlv.h +++ b/include/sound/tas2563-tlv.h @@ -18,7 +18,7 @@ static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); /* pow(10, db/20) * pow(2,30) */ -static const unsigned char tas2563_dvc_table[][4] = { +static const __maybe_unused unsigned char tas2563_dvc_table[][4] = { { 0X00, 0X00, 0X00, 0X00 }, /* -121.5db */ { 0X00, 0X00, 0X03, 0XBC }, /* -121.0db */ { 0X00, 0X00, 0X03, 0XF5 }, /* -120.5db */ -- 2.34.1

4 6

[DISCUSSION] Why doesn't ALSA autogenerate/autoconfigure the mono profile by default?
by Xerox Slayer 25 Aug '24

25 Aug '24

Sorry if this is the wrong place to discuss this, but from what I managed to find out, this is primarily the responsibility of ALSA. This was pointed out by a reddit user, and to be frank, I was kinda surprised that this is not done by default. The user in question is hearing impaired (can listen on only one ear), so the user has no benefit of actually listening to stereo or any other multichannel audio, thus wanted to just set everything to mono (dual mono I presume) and was puzzled when there was no such option in pulseaudio (which pulls the profiles from ALSA). I did some more investigation and as it turns out, this profile is autogenerated, but only if the hardware has such capability (as is the case with any other profile). You can enable it manually by editing config files (in which case I presume the channel downconversion is done in software), but it seemed odd that one has to go through such trouble just to listen to mono sound. Thus, I think the mono profile should be taken as a special case scenario and be autogenerated/configured by default, regardless if it's supported in hardware or not. Once again, I'm sorry if this is not the place to ask/discuss this, but would appreciate if someone pointed me to where I can actually do this.

2 2

[PATCH v4] MAINTAINERS: update entries in TEXAS INSTRUMENTS LOW/MIDDLE-POWER AUDIO AMPLIFIER (ASoC/HDA) DRIVERS and add entries for haptic driver
by Shenghao Ding 25 Aug '24

25 Aug '24

Due to internal re-org, Kevin is no longer mnaintaining audio driver. Due to job change, drop entries for the audio converter and add entries for both haptics drivers and middle-power audio amplifier drivers. Add audio converter, set the Status as Supported. So far, the Software maintainer has not been confirmed. Once the maintainer was confimred, the guy will update his mail into audio converter section. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v4: - Add Touch Screen support v3: - Add Audio converter section - Set the section of LOW/MIDDLE-POWER AUDIO AMPLIFIER as Supported v2: - Add the detailed information of the maintained drivers. --- MAINTAINERS | 34 +++++++++++++++++++++++++--------- 1 file changed, 25 insertions(+), 9 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 878dcd23b331..ff363eac55b1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22591,26 +22591,43 @@ S: Maintained F: Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml F: sound/soc/ti/ -TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS +TEXAS INSTRUMENTS LOW/MIDDLE-POWER AUDIO AMPLIFIER (ASoC/HDA) & HAPTICS DRIVERS M: Shenghao Ding <shenghao-ding(a)ti.com> -M: Kevin Lu <kevin-lu(a)ti.com> M: Baojun Xu <baojun.xu(a)ti.com> L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) -S: Maintained +S: Supported +F: Documentation/devicetree/bindings/input/ti,drv260x.yaml +F: Documentation/devicetree/bindings/input/ti,drv266x.yaml F: Documentation/devicetree/bindings/sound/tas2552.txt +F: Documentation/devicetree/bindings/sound/tas5720.txt F: Documentation/devicetree/bindings/sound/ti,tas2562.yaml F: Documentation/devicetree/bindings/sound/ti,tas2770.yaml +F: Documentation/devicetree/bindings/sound/ti,tas2781.yaml F: Documentation/devicetree/bindings/sound/ti,tas27xx.yaml +F: Documentation/devicetree/bindings/sound/ti,tas5086.txt +F: Documentation/devicetree/bindings/sound/ti,tas57xx.yaml +F: Documentation/devicetree/bindings/sound/ti,tas5805m.yaml +F: Documentation/devicetree/bindings/sound/tpa6130a2.txt +F: drivers/input/misc/drv2*.c +F: include/sound/tas2*.h +F: include/sound/tas5086.h +F: include/sound/tpa6130a2-plat.h +F: sound/pci/hda/tas2781_hda_i2c.c +F: sound/soc/codecs/tas2*.* +F: sound/soc/codecs/tas5*.* +F: sound/soc/codecs/tpa6130a2.* + +TEXAS INSTRUMENTS AUDIO Converter (ASoC) and Touch Screen DRIVERS +L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) +S: Maintained F: Documentation/devicetree/bindings/sound/ti,pcm1681.yaml F: Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml +F: Documentation/devicetree/bindings/sound/ti,pcm6240.yaml F: Documentation/devicetree/bindings/sound/ti,tlv320*.yaml F: Documentation/devicetree/bindings/sound/ti,tlv320adcx140.yaml F: Documentation/devicetree/bindings/sound/tlv320aic31xx.txt -F: Documentation/devicetree/bindings/sound/tpa6130a2.txt -F: include/sound/tas2*.h +F: drivers/input/touchscreen/tsc2*.* F: include/sound/tlv320*.h -F: include/sound/tpa6130a2-plat.h -F: sound/pci/hda/tas2781_hda_i2c.c F: sound/soc/codecs/pcm1681.c F: sound/soc/codecs/pcm1789*.* F: sound/soc/codecs/pcm179x*.* @@ -22620,9 +22637,8 @@ F: sound/soc/codecs/pcm3060*.* F: sound/soc/codecs/pcm3168a*.* F: sound/soc/codecs/pcm5102a.c F: sound/soc/codecs/pcm512x*.* -F: sound/soc/codecs/tas2*.* +F: sound/soc/codecs/pcm6240.* F: sound/soc/codecs/tlv320*.* -F: sound/soc/codecs/tpa6130a2.* TEXAS INSTRUMENTS DMA DRIVERS M: Peter Ujfalusi <peter.ujfalusi(a)gmail.com> -- 2.34.1

1 0

[PATCH 0/2] Add SOF support for ACP7.0 based platform
by Vijendar Mukunda 24 Aug '24

24 Aug '24

This patch series adds SOF support for ACP7.0 based platform. Link: https://github.com/thesofproject/linux/pull/5139 Vijendar Mukunda (2): ASoC: amd: Add acpi machine id for acp7.0 version based platform ASoC: SOF: amd: add support for acp7.0 based platform sound/soc/amd/acp-config.c | 12 +++ sound/soc/amd/mach-config.h | 1 + sound/soc/sof/amd/Kconfig | 10 ++ sound/soc/sof/amd/Makefile | 4 +- sound/soc/sof/amd/acp-dsp-offset.h | 24 ++++- sound/soc/sof/amd/acp.c | 65 ++++++++++--- sound/soc/sof/amd/acp.h | 9 ++ sound/soc/sof/amd/acp70.c | 142 +++++++++++++++++++++++++++++ sound/soc/sof/amd/pci-acp70.c | 112 +++++++++++++++++++++++ 9 files changed, 365 insertions(+), 14 deletions(-) create mode 100644 sound/soc/sof/amd/acp70.c create mode 100644 sound/soc/sof/amd/pci-acp70.c -- 2.34.1

2 3

[PATCH] ASoC: Intel: soc-acpi-cht: Make Lenovo Yoga Tab 3 X90F DMI match less strict
by Hans de Goede 24 Aug '24

24 Aug '24

There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it turns out that the 2G version has a DMI product name of "CHERRYVIEW D1 PLATFORM" where as the 4G version has "CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are unique enough that the product-name check is not necessary. Drop the product-name check so that the existing DMI match for the 4G RAM version also matches the 2G RAM version. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- sound/soc/intel/common/soc-acpi-intel-cht-match.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c index 5e2ec60e2954..e4c3492a0c28 100644 --- a/sound/soc/intel/common/soc-acpi-intel-cht-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c @@ -84,7 +84,6 @@ static const struct dmi_system_id lenovo_yoga_tab3_x90[] = { /* Lenovo Yoga Tab 3 Pro YT3-X90, codec missing from DSDT */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), DMI_MATCH(DMI_PRODUCT_VERSION, "Blade3-10A-001"), }, }, -- 2.46.0

3 2